From 02059684271079f96e2a7a4bdc7912f029997866 Mon Sep 17 00:00:00 2001 From: Hong Xu Date: Tue, 17 Apr 2012 14:26:30 +0800 Subject: ARM: at91: Add machine header file for AT91SAM9N12 SoC Signed-off-by: Hong Xu Signed-off-by: Nicolas Ferre Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- arch/arm/mach-at91/include/mach/at91sam9n12.h | 60 ++++++++++++++++++++++ .../mach-at91/include/mach/at91sam9n12_matrix.h | 53 +++++++++++++++++++ arch/arm/mach-at91/include/mach/cpu.h | 10 ++++ arch/arm/mach-at91/include/mach/hardware.h | 1 + arch/arm/mach-at91/soc.h | 5 ++ 5 files changed, 129 insertions(+) create mode 100644 arch/arm/mach-at91/include/mach/at91sam9n12.h create mode 100644 arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h (limited to 'arch/arm') diff --git a/arch/arm/mach-at91/include/mach/at91sam9n12.h b/arch/arm/mach-at91/include/mach/at91sam9n12.h new file mode 100644 index 00000000000..d374b87c045 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91sam9n12.h @@ -0,0 +1,60 @@ +/* + * SoC specific header file for the AT91SAM9N12 + * + * Copyright (C) 2012 Atmel Corporation + * + * Common definitions, based on AT91SAM9N12 SoC datasheet + * + * Licensed under GPLv2 or later + */ + +#ifndef _AT91SAM9N12_H_ +#define _AT91SAM9N12_H_ + +/* + * Peripheral identifiers/interrupts. + */ +#define AT91SAM9N12_ID_PIOAB 2 /* Parallel I/O Controller A and B */ +#define AT91SAM9N12_ID_PIOCD 3 /* Parallel I/O Controller C and D */ +#define AT91SAM9N12_ID_FUSE 4 /* FUSE Controller */ +#define AT91SAM9N12_ID_USART0 5 /* USART 0 */ +#define AT91SAM9N12_ID_USART1 6 /* USART 1 */ +#define AT91SAM9N12_ID_USART2 7 /* USART 2 */ +#define AT91SAM9N12_ID_USART3 8 /* USART 3 */ +#define AT91SAM9N12_ID_TWI0 9 /* Two-Wire Interface 0 */ +#define AT91SAM9N12_ID_TWI1 10 /* Two-Wire Interface 1 */ +#define AT91SAM9N12_ID_MCI 12 /* High Speed Multimedia Card Interface */ +#define AT91SAM9N12_ID_SPI0 13 /* Serial Peripheral Interface 0 */ +#define AT91SAM9N12_ID_SPI1 14 /* Serial Peripheral Interface 1 */ +#define AT91SAM9N12_ID_UART0 15 /* UART 0 */ +#define AT91SAM9N12_ID_UART1 16 /* UART 1 */ +#define AT91SAM9N12_ID_TCB 17 /* Timer Counter 0, 1, 2, 3, 4 and 5 */ +#define AT91SAM9N12_ID_PWM 18 /* Pulse Width Modulation Controller */ +#define AT91SAM9N12_ID_ADC 19 /* ADC Controller */ +#define AT91SAM9N12_ID_DMA 20 /* DMA Controller */ +#define AT91SAM9N12_ID_UHP 22 /* USB Host High Speed */ +#define AT91SAM9N12_ID_UDP 23 /* USB Device High Speed */ +#define AT91SAM9N12_ID_LCDC 25 /* LCD Controller */ +#define AT91SAM9N12_ID_ISI 25 /* Image Sensor Interface */ +#define AT91SAM9N12_ID_SSC 28 /* Synchronous Serial Controller */ +#define AT91SAM9N12_ID_TRNG 30 /* TRNG */ +#define AT91SAM9N12_ID_IRQ0 31 /* Advanced Interrupt Controller */ + +/* + * User Peripheral physical base addresses. + */ +#define AT91SAM9N12_BASE_USART0 0xf801c000 +#define AT91SAM9N12_BASE_USART1 0xf8020000 +#define AT91SAM9N12_BASE_USART2 0xf8024000 +#define AT91SAM9N12_BASE_USART3 0xf8028000 + +/* + * Internal Memory. + */ +#define AT91SAM9N12_SRAM_BASE 0x00300000 /* Internal SRAM base address */ +#define AT91SAM9N12_SRAM_SIZE SZ_32K /* Internal SRAM size (32Kb) */ + +#define AT91SAM9N12_ROM_BASE 0x00100000 /* Internal ROM base address */ +#define AT91SAM9N12_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */ + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h new file mode 100644 index 00000000000..40060cd62fa --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h @@ -0,0 +1,53 @@ +/* + * Matrix-centric header file for the AT91SAM9N12 + * + * Copyright (C) 2012 Atmel Corporation. + * + * Only EBI related registers. + * Write Protect register definitions may be useful. + * + * Licensed under GPLv2 or later. + */ + +#ifndef _AT91SAM9N12_MATRIX_H_ +#define _AT91SAM9N12_MATRIX_H_ + +#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x118) /* EBI Chip Select Assignment Register */ +#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ +#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) +#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1) +#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */ +#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) +#define AT91_MATRIX_EBI_CS3A_SMC_NANDFLASH (1 << 3) +#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ +#define AT91_MATRIX_EBI_DBPU_ON (0 << 8) +#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8) +#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */ +#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) +#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) +#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */ +#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17) +#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17) +#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */ +#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18) +#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18) +#define AT91_MATRIX_NFD0_SELECT (1 << 24) /* NAND Flash Data Bus Selection */ +#define AT91_MATRIX_NFD0_ON_D0 (0 << 24) +#define AT91_MATRIX_NFD0_ON_D16 (1 << 24) +#define AT91_MATRIX_DDR_MP_EN (1 << 25) /* DDR Multi-port Enable */ +#define AT91_MATRIX_MP_OFF (0 << 25) +#define AT91_MATRIX_MP_ON (1 << 25) + +#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */ +#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */ +#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0) +#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0) +#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */ + +#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */ +#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */ +#define AT91_MATRIX_WPSR_NO_WPV (0 << 0) +#define AT91_MATRIX_WPSR_WPV (1 << 0) +#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */ + +#endif diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index 73d2fd209ce..b6504c19d55 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -25,6 +25,7 @@ #define ARCH_ID_AT91SAM9G45MRL 0x819b05a2 /* aka 9G45-ES2 & non ES lots */ #define ARCH_ID_AT91SAM9G45ES 0x819b05a1 /* 9G45-ES (Engineering Sample) */ #define ARCH_ID_AT91SAM9X5 0x819a05a0 +#define ARCH_ID_AT91SAM9N12 0x819a07a0 #define ARCH_ID_AT91SAM9XE128 0x329973a0 #define ARCH_ID_AT91SAM9XE256 0x329a93a0 @@ -71,6 +72,9 @@ enum at91_soc_type { /* SAM9X5 */ AT91_SOC_SAM9X5, + /* SAM9N12 */ + AT91_SOC_SAM9N12, + /* Unknown type */ AT91_SOC_NONE }; @@ -177,6 +181,12 @@ static inline int at91_soc_is_detected(void) #define cpu_is_at91sam9x25() (0) #endif +#ifdef CONFIG_SOC_AT91SAM9N12 +#define cpu_is_at91sam9n12() (at91_soc_initdata.type == AT91_SOC_SAM9N12) +#else +#define cpu_is_at91sam9n12() (0) +#endif + /* * Since this is ARM, we will never run on any AVR32 CPU. But these * definitions may reduce clutter in common drivers. diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index 3a01f8ff7e7..24b46bd14bb 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -32,6 +32,7 @@ #include #include #include +#include /* * On all at91 except rm9200 and x40 have the System Controller starts diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h index 683dddfd8b1..a9cfeb15371 100644 --- a/arch/arm/mach-at91/soc.h +++ b/arch/arm/mach-at91/soc.h @@ -20,6 +20,7 @@ extern struct at91_init_soc at91sam9263_soc; extern struct at91_init_soc at91sam9g45_soc; extern struct at91_init_soc at91sam9rl_soc; extern struct at91_init_soc at91sam9x5_soc; +extern struct at91_init_soc at91sam9n12_soc; static inline int at91_soc_is_enabled(void) { @@ -53,3 +54,7 @@ static inline int at91_soc_is_enabled(void) #if !defined(CONFIG_SOC_AT91SAM9X5) #define at91sam9x5_soc at91_boot_soc #endif + +#if !defined(CONFIG_SOC_AT91SAM9N12) +#define at91sam9n12_soc at91_boot_soc +#endif -- cgit v1.2.3-18-g5258 From 74db4fb93e4ed4d6241bf0f28e4b5d68a7a05577 Mon Sep 17 00:00:00 2001 From: Hong Xu Date: Tue, 17 Apr 2012 14:26:31 +0800 Subject: ARM: at91: Add machine files for AT91SAM9N12 SoC Signed-off-by: Hong Xu Signed-off-by: Nicolas Ferre Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- arch/arm/mach-at91/Kconfig | 8 ++ arch/arm/mach-at91/Makefile | 1 + arch/arm/mach-at91/Makefile.boot | 2 + arch/arm/mach-at91/at91sam9n12.c | 233 +++++++++++++++++++++++++++++++++++++++ arch/arm/mach-at91/clock.c | 15 ++- arch/arm/mach-at91/setup.c | 6 + 6 files changed, 260 insertions(+), 5 deletions(-) create mode 100644 arch/arm/mach-at91/at91sam9n12.c (limited to 'arch/arm') diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 98a42f3472d..19505c0a3f0 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -91,6 +91,14 @@ config SOC_AT91SAM9X5 This support covers AT91SAM9G15, AT91SAM9G25, AT91SAM9X25, AT91SAM9G35 and AT91SAM9X35. +config SOC_AT91SAM9N12 + bool "AT91SAM9N12 family" + select SOC_AT91SAM9 + select HAVE_AT91_DBGU0 + select HAVE_FB_ATMEL + help + Select this if you are using Atmel's AT91SAM9N12 SoC. + choice prompt "Atmel AT91 Processor Devices for non DT boards" diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 79d0f60af0b..3bb7a51efc9 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_SOC_AT91SAM9260) += at91sam9260.o obj-$(CONFIG_SOC_AT91SAM9261) += at91sam9261.o obj-$(CONFIG_SOC_AT91SAM9263) += at91sam9263.o obj-$(CONFIG_SOC_AT91SAM9G45) += at91sam9g45.o +obj-$(CONFIG_SOC_AT91SAM9N12) += at91sam9n12.o obj-$(CONFIG_SOC_AT91SAM9X5) += at91sam9x5.o obj-$(CONFIG_SOC_AT91SAM9RL) += at91sam9rl.o diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot index c03417ddbf0..9e84fe4f2aa 100644 --- a/arch/arm/mach-at91/Makefile.boot +++ b/arch/arm/mach-at91/Makefile.boot @@ -30,5 +30,7 @@ dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9g20.dtb dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9g20.dtb # sam9g45 dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9m10g45ek.dtb +# sam9n12 +dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9n12ek.dtb # sam9x5 dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g25ek.dtb diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c new file mode 100644 index 00000000000..08494664ab7 --- /dev/null +++ b/arch/arm/mach-at91/at91sam9n12.c @@ -0,0 +1,233 @@ +/* + * SoC specific setup code for the AT91SAM9N12 + * + * Copyright (C) 2012 Atmel Corporation. + * + * Licensed under GPLv2 or later. + */ + +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "soc.h" +#include "generic.h" +#include "clock.h" +#include "sam9_smc.h" + +/* -------------------------------------------------------------------- + * Clocks + * -------------------------------------------------------------------- */ + +/* + * The peripheral clocks. + */ +static struct clk pioAB_clk = { + .name = "pioAB_clk", + .pmc_mask = 1 << AT91SAM9N12_ID_PIOAB, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pioCD_clk = { + .name = "pioCD_clk", + .pmc_mask = 1 << AT91SAM9N12_ID_PIOCD, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart0_clk = { + .name = "usart0_clk", + .pmc_mask = 1 << AT91SAM9N12_ID_USART0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart1_clk = { + .name = "usart1_clk", + .pmc_mask = 1 << AT91SAM9N12_ID_USART1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart2_clk = { + .name = "usart2_clk", + .pmc_mask = 1 << AT91SAM9N12_ID_USART2, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart3_clk = { + .name = "usart3_clk", + .pmc_mask = 1 << AT91SAM9N12_ID_USART3, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk twi0_clk = { + .name = "twi0_clk", + .pmc_mask = 1 << AT91SAM9N12_ID_TWI0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk twi1_clk = { + .name = "twi1_clk", + .pmc_mask = 1 << AT91SAM9N12_ID_TWI1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mmc_clk = { + .name = "mci_clk", + .pmc_mask = 1 << AT91SAM9N12_ID_MCI, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk spi0_clk = { + .name = "spi0_clk", + .pmc_mask = 1 << AT91SAM9N12_ID_SPI0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk spi1_clk = { + .name = "spi1_clk", + .pmc_mask = 1 << AT91SAM9N12_ID_SPI1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk uart0_clk = { + .name = "uart0_clk", + .pmc_mask = 1 << AT91SAM9N12_ID_UART0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk uart1_clk = { + .name = "uart1_clk", + .pmc_mask = 1 << AT91SAM9N12_ID_UART1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk tcb_clk = { + .name = "tcb_clk", + .pmc_mask = 1 << AT91SAM9N12_ID_TCB, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pwm_clk = { + .name = "pwm_clk", + .pmc_mask = 1 << AT91SAM9N12_ID_PWM, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk adc_clk = { + .name = "adc_clk", + .pmc_mask = 1 << AT91SAM9N12_ID_ADC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk dma_clk = { + .name = "dma_clk", + .pmc_mask = 1 << AT91SAM9N12_ID_DMA, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk uhp_clk = { + .name = "uhp", + .pmc_mask = 1 << AT91SAM9N12_ID_UHP, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk udp_clk = { + .name = "udp_clk", + .pmc_mask = 1 << AT91SAM9N12_ID_UDP, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk lcdc_clk = { + .name = "lcdc_clk", + .pmc_mask = 1 << AT91SAM9N12_ID_LCDC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk ssc_clk = { + .name = "ssc_clk", + .pmc_mask = 1 << AT91SAM9N12_ID_SSC, + .type = CLK_TYPE_PERIPHERAL, +}; + +static struct clk *periph_clocks[] __initdata = { + &pioAB_clk, + &pioCD_clk, + &usart0_clk, + &usart1_clk, + &usart2_clk, + &usart3_clk, + &twi0_clk, + &twi1_clk, + &mmc_clk, + &spi0_clk, + &spi1_clk, + &lcdc_clk, + &uart0_clk, + &uart1_clk, + &tcb_clk, + &pwm_clk, + &adc_clk, + &dma_clk, + &uhp_clk, + &udp_clk, + &ssc_clk, +}; + +static struct clk_lookup periph_clocks_lookups[] = { + /* lookup table for DT entries */ + CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), + CLKDEV_CON_DEV_ID("usart", "f801c000.serial", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "f8020000.serial", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "f8024000.serial", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk), + CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb_clk), + CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb_clk), + CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma_clk), + CLKDEV_CON_ID("pioA", &pioAB_clk), + CLKDEV_CON_ID("pioB", &pioAB_clk), + CLKDEV_CON_ID("pioC", &pioCD_clk), + CLKDEV_CON_ID("pioD", &pioCD_clk), + /* additional fake clock for macb_hclk */ + CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &uhp_clk), + CLKDEV_CON_DEV_ID("ohci_clk", "500000.ohci", &uhp_clk), +}; + +/* + * The two programmable clocks. + * You must configure pin multiplexing to bring these signals out. + */ +static struct clk pck0 = { + .name = "pck0", + .pmc_mask = AT91_PMC_PCK0, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 0, +}; +static struct clk pck1 = { + .name = "pck1", + .pmc_mask = AT91_PMC_PCK1, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 1, +}; + +static void __init at91sam9n12_register_clocks(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) + clk_register(periph_clocks[i]); + clk_register(&pck0); + clk_register(&pck1); + + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + +} + +/* -------------------------------------------------------------------- + * AT91SAM9N12 processor initialization + * -------------------------------------------------------------------- */ + +static void __init at91sam9n12_map_io(void) +{ + at91_init_sram(0, AT91SAM9N12_SRAM_BASE, AT91SAM9N12_SRAM_SIZE); +} + +void __init at91sam9n12_initialize(void) +{ + at91_extern_irq = (1 << AT91SAM9N12_ID_IRQ0); + + /* Register GPIO subsystem (using DT) */ + at91_gpio_init(NULL, 0); +} + +struct at91_init_soc __initdata at91sam9n12_soc = { + .map_io = at91sam9n12_map_io, + .register_clocks = at91sam9n12_register_clocks, + .init = at91sam9n12_initialize, +}; diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index a0f4d7424cd..46130dad2d0 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -57,13 +57,15 @@ void __iomem *at91_pmc_base; #define cpu_has_800M_plla() ( cpu_is_at91sam9g20() \ || cpu_is_at91sam9g45() \ - || cpu_is_at91sam9x5()) + || cpu_is_at91sam9x5() \ + || cpu_is_at91sam9n12()) #define cpu_has_300M_plla() (cpu_is_at91sam9g10()) #define cpu_has_pllb() (!(cpu_is_at91sam9rl() \ || cpu_is_at91sam9g45() \ - || cpu_is_at91sam9x5())) + || cpu_is_at91sam9x5() \ + || cpu_is_at91sam9n12())) #define cpu_has_upll() (cpu_is_at91sam9g45() \ || cpu_is_at91sam9x5()) @@ -77,12 +79,15 @@ void __iomem *at91_pmc_base; || cpu_is_at91sam9x5())) #define cpu_has_plladiv2() (cpu_is_at91sam9g45() \ - || cpu_is_at91sam9x5()) + || cpu_is_at91sam9x5() \ + || cpu_is_at91sam9n12()) #define cpu_has_mdiv3() (cpu_is_at91sam9g45() \ - || cpu_is_at91sam9x5()) + || cpu_is_at91sam9x5() \ + || cpu_is_at91sam9n12()) -#define cpu_has_alt_prescaler() (cpu_is_at91sam9x5()) +#define cpu_has_alt_prescaler() (cpu_is_at91sam9x5() \ + || cpu_is_at91sam9n12()) static LIST_HEAD(clocks); static DEFINE_SPINLOCK(clk_lock); diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 97cc04dc807..34c9c27c917 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -142,6 +142,11 @@ static void __init soc_detect(u32 dbgu_base) at91_soc_initdata.type = AT91_SOC_SAM9X5; at91_boot_soc = at91sam9x5_soc; break; + + case ARCH_ID_AT91SAM9N12: + at91_soc_initdata.type = AT91_SOC_SAM9N12; + at91_boot_soc = at91sam9n12_soc; + break; } /* at91sam9g10 */ @@ -209,6 +214,7 @@ static const char *soc_name[] = { [AT91_SOC_SAM9G45] = "at91sam9g45", [AT91_SOC_SAM9RL] = "at91sam9rl", [AT91_SOC_SAM9X5] = "at91sam9x5", + [AT91_SOC_SAM9N12] = "at91sam9n12", [AT91_SOC_NONE] = "Unknown" }; -- cgit v1.2.3-18-g5258 From cce783c608fee0716cff65926d1835a5fd097b69 Mon Sep 17 00:00:00 2001 From: Hong Xu Date: Tue, 17 Apr 2012 14:26:29 +0800 Subject: ARM: at91: Add DT description files for AT91SAM9N12-EK Added AT91SAM9N12 SoC DT file, as well as the board definition .dts file for AT91SAM9N12-EK. Signed-off-by: Hong Xu Signed-off-by: Nicolas Ferre Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- arch/arm/boot/dts/at91sam9n12.dtsi | 221 ++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/at91sam9n12ek.dts | 84 ++++++++++++++ 2 files changed, 305 insertions(+) create mode 100644 arch/arm/boot/dts/at91sam9n12.dtsi create mode 100644 arch/arm/boot/dts/at91sam9n12ek.dts (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi new file mode 100644 index 00000000000..cb84de791b5 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -0,0 +1,221 @@ +/* + * at91sam9n12.dtsi - Device Tree include file for AT91SAM9N12 SoC + * + * Copyright (C) 2012 Atmel, + * 2012 Hong Xu + * + * Licensed under GPLv2 or later. + */ + +/include/ "skeleton.dtsi" + +/ { + model = "Atmel AT91SAM9N12 SoC"; + compatible = "atmel,at91sam9n12"; + interrupt-parent = <&aic>; + + aliases { + serial0 = &dbgu; + serial1 = &usart0; + serial2 = &usart1; + serial3 = &usart2; + serial4 = &usart3; + gpio0 = &pioA; + gpio1 = &pioB; + gpio2 = &pioC; + gpio3 = &pioD; + tcb0 = &tcb0; + tcb1 = &tcb1; + }; + cpus { + cpu@0 { + compatible = "arm,arm926ejs"; + }; + }; + + memory { + reg = <0x20000000 0x10000000>; + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + aic: interrupt-controller@fffff000 { + #interrupt-cells = <2>; + compatible = "atmel,at91rm9200-aic"; + interrupt-controller; + reg = <0xfffff000 0x200>; + }; + + ramc0: ramc@ffffe800 { + compatible = "atmel,at91sam9g45-ddramc"; + reg = <0xffffe800 0x200>; + }; + + pmc: pmc@fffffc00 { + compatible = "atmel,at91rm9200-pmc"; + reg = <0xfffffc00 0x100>; + }; + + rstc@fffffe00 { + compatible = "atmel,at91sam9g45-rstc"; + reg = <0xfffffe00 0x10>; + }; + + pit: timer@fffffe30 { + compatible = "atmel,at91sam9260-pit"; + reg = <0xfffffe30 0xf>; + interrupts = <1 4>; + }; + + shdwc@fffffe10 { + compatible = "atmel,at91sam9x5-shdwc"; + reg = <0xfffffe10 0x10>; + }; + + tcb0: timer@f8008000 { + compatible = "atmel,at91sam9x5-tcb"; + reg = <0xf8008000 0x100>; + interrupts = <17 4>; + }; + + tcb1: timer@f800c000 { + compatible = "atmel,at91sam9x5-tcb"; + reg = <0xf800c000 0x100>; + interrupts = <17 4>; + }; + + dma: dma-controller@ffffec00 { + compatible = "atmel,at91sam9g45-dma"; + reg = <0xffffec00 0x200>; + interrupts = <20 4>; + }; + + pioA: gpio@fffff400 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x100>; + interrupts = <2 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + pioB: gpio@fffff600 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x100>; + interrupts = <2 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + pioC: gpio@fffff800 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x100>; + interrupts = <3 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + pioD: gpio@fffffa00 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x100>; + interrupts = <3 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + dbgu: serial@fffff200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffff200 0x200>; + interrupts = <1 4>; + status = "disabled"; + }; + + usart0: serial@f801c000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf801c000 0x4000>; + interrupts = <5 4>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; + + usart1: serial@f8020000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8020000 0x4000>; + interrupts = <6 4>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; + + usart2: serial@f8024000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8024000 0x4000>; + interrupts = <7 4>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; + + usart3: serial@f8028000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8028000 0x4000>; + interrupts = <8 4>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; + }; + + nand0: nand@40000000 { + compatible = "atmel,at91rm9200-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = < 0x40000000 0x10000000 + 0xffffe000 0x00000600 + 0xffffe600 0x00000200 + 0x00100000 0x00100000 + >; + atmel,nand-addr-offset = <21>; + atmel,nand-cmd-offset = <22>; + gpios = <&pioD 5 0 + &pioD 4 0 + 0 + >; + status = "disabled"; + }; + + usb0: ohci@00500000 { + compatible = "atmel,at91rm9200-ohci", "usb-ohci"; + reg = <0x00500000 0x00100000>; + interrupts = <22 4>; + status = "disabled"; + }; + }; + + i2c@0 { + compatible = "i2c-gpio"; + gpios = <&pioA 30 0 /* sda */ + &pioA 31 0 /* scl */ + >; + i2c-gpio,sda-open-drain; + i2c-gpio,scl-open-drain; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts new file mode 100644 index 00000000000..f4e43e38f3a --- /dev/null +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -0,0 +1,84 @@ +/* + * at91sam9n12ek.dts - Device Tree file for AT91SAM9N12-EK board + * + * Copyright (C) 2012 Atmel, + * 2012 Hong Xu + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "at91sam9n12.dtsi" + +/ { + model = "Atmel AT91SAM9N12-EK"; + compatible = "atmel,at91sam9n12ek", "atmel,at91sam9n12", "atmel,at91sam9"; + + chosen { + bootargs = "mem=128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2"; + }; + + memory { + reg = <0x20000000 0x10000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <16000000>; + }; + }; + + ahb { + apb { + dbgu: serial@fffff200 { + status = "okay"; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + + d8 { + label = "d8"; + gpios = <&pioB 4 1>; + linux,default-trigger = "mmc0"; + }; + + d9 { + label = "d6"; + gpios = <&pioB 5 1>; + linux,default-trigger = "nand-disk"; + }; + + d10 { + label = "d7"; + gpios = <&pioB 6 0>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + enter { + label = "Enter"; + gpios = <&pioB 4 1>; + linux,code = <28>; + gpio-key,wakeup; + }; + }; +}; -- cgit v1.2.3-18-g5258 From bc71c0961c61d6082472203bfae9596899c9c896 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 23 Jan 2012 11:54:44 +0100 Subject: ARM: ux500: core U9540 support This adds support for the U9540 variant of the U8500 series. This is an application processor without internal modem. This is the most basic part with ASIC ID, CPU-related fixes, IRQ list, register ranges, timer, UART, and L2 cache setup. This is based on a patch by Michel Jaouen which was rewritten to fit with the latest 3.3 kernel. ChangeLog v1->v2: deleted the irqs-db9540.h file since we expect to migrate to using Device Tree for getting the IRQs to devices. ChangeLog v2->v3: introduced a fixed virtual offset for the ROM as suggested by Arnd Bergmann. Acked-by: Arnd Bergmann Signed-off-by: Sebastien Pasdeloup Signed-off-by: Michel Jaouen Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500-uib.c | 2 +- arch/arm/mach-ux500/cache-l2x0.c | 16 +++++++++++++--- arch/arm/mach-ux500/clock.c | 2 +- arch/arm/mach-ux500/cpu-db8500.c | 6 +++--- arch/arm/mach-ux500/cpu.c | 4 ++-- arch/arm/mach-ux500/id.c | 9 +++++++-- arch/arm/mach-ux500/include/mach/db8500-regs.h | 6 ++++++ arch/arm/mach-ux500/include/mach/hardware.h | 3 +++ arch/arm/mach-ux500/include/mach/id.h | 17 ++++++++++++++++- arch/arm/mach-ux500/include/mach/irqs.h | 2 +- arch/arm/mach-ux500/platsmp.c | 4 ++-- arch/arm/mach-ux500/timer.c | 2 +- 12 files changed, 56 insertions(+), 17 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/board-mop500-uib.c b/arch/arm/mach-ux500/board-mop500-uib.c index 5af36aa56c0..b29a788f498 100644 --- a/arch/arm/mach-ux500/board-mop500-uib.c +++ b/arch/arm/mach-ux500/board-mop500-uib.c @@ -102,7 +102,7 @@ static int __init mop500_uib_init(void) struct i2c_adapter *i2c0; int ret; - if (!cpu_is_u8500()) + if (!cpu_is_u8500_family()) return -ENODEV; if (uib) { diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c index 77a75ed0df6..677bb7683c7 100644 --- a/arch/arm/mach-ux500/cache-l2x0.c +++ b/arch/arm/mach-ux500/cache-l2x0.c @@ -36,9 +36,11 @@ static int __init ux500_l2x0_unlock(void) static int __init ux500_l2x0_init(void) { + u32 aux_val = 0x3e000000; + if (cpu_is_u5500()) l2x0_base = __io_address(U5500_L2CC_BASE); - else if (cpu_is_u8500()) + else if (cpu_is_u8500_family()) l2x0_base = __io_address(U8500_L2CC_BASE); else ux500_unknown_soc(); @@ -46,11 +48,19 @@ static int __init ux500_l2x0_init(void) /* Unlock before init */ ux500_l2x0_unlock(); + /* DB9540's L2 has 128KB way size */ + if (cpu_is_u9540()) + /* 128KB way size */ + aux_val |= (0x4 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT); + else + /* 64KB way size */ + aux_val |= (0x3 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT); + /* 64KB way size, 8 way associativity, force WA */ if (of_have_populated_dt()) - l2x0_of_init(0x3e060000, 0xc0000fff); + l2x0_of_init(aux_val, 0xc0000fff); else - l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff); + l2x0_init(l2x0_base, aux_val, 0xc0000fff); /* * We can't disable l2 as we are in non secure mode, currently diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c index ec35f0aa566..cc87f7788ff 100644 --- a/arch/arm/mach-ux500/clock.c +++ b/arch/arm/mach-ux500/clock.c @@ -151,7 +151,7 @@ static unsigned long clk_mtu_get_rate(struct clk *clk) if (cpu_is_u5500()) addr = __io_address(U5500_PRCMU_BASE); - else if (cpu_is_u8500()) + else if (cpu_is_u8500_family()) addr = __io_address(U8500_PRCMU_BASE); else ux500_unknown_soc(); diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 9bd8163896c..0bdcdd96fdc 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -34,8 +34,8 @@ static struct map_desc u8500_uart_io_desc[] __initdata = { __IO_DEV_DESC(U8500_UART0_BASE, SZ_4K), __IO_DEV_DESC(U8500_UART2_BASE, SZ_4K), }; - -static struct map_desc u8500_io_desc[] __initdata = { +/* U8500 and U9540 common io_desc */ +static struct map_desc u8500_common_io_desc[] __initdata = { /* SCU base also covers GIC CPU BASE and TWD with its 4K page */ __IO_DEV_DESC(U8500_SCU_BASE, SZ_4K), __IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K), @@ -66,7 +66,7 @@ void __init u8500_map_io(void) ux500_map_io(); - iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc)); + iotable_init(u8500_common_io_desc, ARRAY_SIZE(u8500_common_io_desc)); _PRCMU_BASE = __io_address(U8500_PRCMU_BASE); } diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index d11f3892a27..857e4816752 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -43,7 +43,7 @@ void __init ux500_init_irq(void) if (cpu_is_u5500()) { dist_base = __io_address(U5500_GIC_DIST_BASE); cpu_base = __io_address(U5500_GIC_CPU_BASE); - } else if (cpu_is_u8500()) { + } else if (cpu_is_u8500_family()) { dist_base = __io_address(U8500_GIC_DIST_BASE); cpu_base = __io_address(U8500_GIC_CPU_BASE); } else @@ -62,7 +62,7 @@ void __init ux500_init_irq(void) */ if (cpu_is_u5500()) db5500_prcmu_early_init(); - if (cpu_is_u8500()) + if (cpu_is_u8500_family()) db8500_prcmu_early_init(); clk_init(); } diff --git a/arch/arm/mach-ux500/id.c b/arch/arm/mach-ux500/id.c index 15a0f63b2e2..d1579920139 100644 --- a/arch/arm/mach-ux500/id.c +++ b/arch/arm/mach-ux500/id.c @@ -23,7 +23,7 @@ static unsigned int ux500_read_asicid(phys_addr_t addr) { phys_addr_t base = addr & ~0xfff; struct map_desc desc = { - .virtual = IO_ADDRESS(base), + .virtual = UX500_VIRT_ROM, .pfn = __phys_to_pfn(base), .length = SZ_16K, .type = MT_DEVICE, @@ -35,7 +35,7 @@ static unsigned int ux500_read_asicid(phys_addr_t addr) local_flush_tlb_all(); flush_cache_all(); - return readl(__io_address(addr)); + return readl(IOMEM(UX500_VIRT_ROM + (addr & 0xfff))); } static void ux500_print_soc_info(unsigned int asicid) @@ -67,6 +67,7 @@ static unsigned int partnumber(unsigned int asicid) * DB8500v2 0x412fc091 0x9001DBF4 0x008500B0 * DB8520v2.2 0x412fc091 0x9001DBF4 0x008500B2 * DB5500v1 0x412fc091 0x9001FFF4 0x005500A0 + * DB9540 0x413fc090 0xFFFFDBF4 0x009540xx */ void __init ux500_map_io(void) @@ -91,6 +92,10 @@ void __init ux500_map_io(void) /* DB5500v1 */ addr = 0x9001FFF4; break; + + case 0x413fc090: /* DB9540 */ + addr = 0xFFFFDBF4; + break; } if (addr) diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h index 9ec20b96d8f..1530d493879 100644 --- a/arch/arm/mach-ux500/include/mach/db8500-regs.h +++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h @@ -41,6 +41,10 @@ /* ASIC ID is at 0xbf4 offset within this region */ #define U8500_ASIC_ID_BASE 0x9001D000 +#define U9540_BOOT_ROM_BASE 0xFFFE0000 +/* ASIC ID is at 0xbf4 offset within this region */ +#define U9540_ASIC_ID_BASE 0xFFFFD000 + #define U8500_PER6_BASE 0xa03c0000 #define U8500_PER7_BASE 0xa03d0000 #define U8500_PER5_BASE 0xa03e0000 @@ -96,7 +100,9 @@ #define U8500_SCR_BASE (U8500_PER4_BASE + 0x05000) #define U8500_DMC_BASE (U8500_PER4_BASE + 0x06000) #define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000) +#define U9540_DMC1_BASE (U8500_PER4_BASE + 0x0A000) #define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000) +#define U9540_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x6A000) #define U8500_PRCMU_TCPM_BASE (U8500_PER4_BASE + 0x60000) #define U8500_PRCMU_TIMER_3_BASE (U8500_PER4_BASE + 0x07338) #define U8500_PRCMU_TIMER_4_BASE (U8500_PER4_BASE + 0x07450) diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h index f84698936d3..836165778a2 100644 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -17,6 +17,8 @@ */ #define U8500_IO_VIRTUAL 0xf0000000 #define U8500_IO_PHYSICAL 0xa0000000 +/* This is where we map in the ROM to check ASIC IDs */ +#define UX500_VIRT_ROM 0xf0000000 /* This macro is used in assembly, so no cast */ #define IO_ADDRESS(x) \ @@ -24,6 +26,7 @@ /* typesafe io address */ #define __io_address(n) IOMEM(IO_ADDRESS(n)) + /* Used by some plat-nomadik code */ #define io_p2v(n) __io_address(n) diff --git a/arch/arm/mach-ux500/include/mach/id.h b/arch/arm/mach-ux500/include/mach/id.h index 833d6a6edc9..c6e2db9e9e5 100644 --- a/arch/arm/mach-ux500/include/mach/id.h +++ b/arch/arm/mach-ux500/include/mach/id.h @@ -41,6 +41,16 @@ static inline bool __attribute_const__ cpu_is_u8500(void) return dbx500_partnumber() == 0x8500; } +static inline bool __attribute_const__ cpu_is_u9540(void) +{ + return dbx500_partnumber() == 0x9540; +} + +static inline bool cpu_is_u8500_family(void) +{ + return cpu_is_u8500() || cpu_is_u9540(); +} + static inline bool __attribute_const__ cpu_is_u5500(void) { return dbx500_partnumber() == 0x5500; @@ -111,7 +121,12 @@ static inline bool cpu_is_u8500v21(void) static inline bool cpu_is_u8500v20_or_later(void) { - return cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11(); + /* + * U9540 has so much in common with U8500 that is is considered a + * U8500 variant. + */ + return cpu_is_u9540() || + (cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11()); } static inline bool ux500_is_svp(void) diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h index c23a6b5f0c4..7da9ec58a53 100644 --- a/arch/arm/mach-ux500/include/mach/irqs.h +++ b/arch/arm/mach-ux500/include/mach/irqs.h @@ -24,7 +24,7 @@ */ #define IRQ_MTU0 (IRQ_SHPI_START + 4) -#define DBX500_NR_INTERNAL_IRQS 160 +#define DBX500_NR_INTERNAL_IRQS 166 /* After chip-specific IRQ numbers we have the GPIO ones */ #define NOMADIK_NR_GPIO 288 diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index eff5842f623..f499a070392 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -50,7 +50,7 @@ static void __iomem *scu_base_addr(void) { if (cpu_is_u5500()) return __io_address(U5500_SCU_BASE); - else if (cpu_is_u8500()) + else if (cpu_is_u8500_family()) return __io_address(U8500_SCU_BASE); else ux500_unknown_soc(); @@ -122,7 +122,7 @@ static void __init wakeup_secondary(void) if (cpu_is_u5500()) backupram = __io_address(U5500_BACKUPRAM0_BASE); - else if (cpu_is_u8500()) + else if (cpu_is_u8500_family()) backupram = __io_address(U8500_BACKUPRAM0_BASE); else ux500_unknown_soc(); diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c index d37df98b5c3..3bfbfdf833c 100644 --- a/arch/arm/mach-ux500/timer.c +++ b/arch/arm/mach-ux500/timer.c @@ -51,7 +51,7 @@ static void __init ux500_timer_init(void) if (cpu_is_u5500()) { mtu_timer_base = __io_address(U5500_MTU0_BASE); prcmu_timer_base = __io_address(U5500_PRCMU_TIMER_3_BASE); - } else if (cpu_is_u8500()) { + } else if (cpu_is_u8500_family()) { mtu_timer_base = __io_address(U8500_MTU0_BASE); prcmu_timer_base = __io_address(U8500_PRCMU_TIMER_4_BASE); } else { -- cgit v1.2.3-18-g5258 From ee9581d7adaeb2d04b01e3567e2355ceb5f43ad1 Mon Sep 17 00:00:00 2001 From: Michel Jaouen Date: Wed, 1 Feb 2012 10:30:53 +0100 Subject: ARM: ux500: ioremap differences for DB9540 The DB9540 ASIC has bigger PRCMU and PRCMU TCDM memories, so create a separate mapping table for these. Signed-off-by: Michel Jaouen Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/cpu-db8500.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 0bdcdd96fdc..b1683427088 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -49,12 +49,23 @@ static struct map_desc u8500_common_io_desc[] __initdata = { __IO_DEV_DESC(U8500_CLKRST5_BASE, SZ_4K), __IO_DEV_DESC(U8500_CLKRST6_BASE, SZ_4K), - __IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K), +}; + +/* U8500 IO map specific description */ +static struct map_desc u8500_io_desc[] __initdata = { + __IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K), __IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K), + +}; + +/* U9540 IO map specific description */ +static struct map_desc u9540_io_desc[] __initdata = { + __IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K + SZ_8K), + __IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K + SZ_8K), }; void __init u8500_map_io(void) @@ -68,6 +79,11 @@ void __init u8500_map_io(void) iotable_init(u8500_common_io_desc, ARRAY_SIZE(u8500_common_io_desc)); + if (cpu_is_u9540()) + iotable_init(u9540_io_desc, ARRAY_SIZE(u9540_io_desc)); + else + iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc)); + _PRCMU_BASE = __io_address(U8500_PRCMU_BASE); } -- cgit v1.2.3-18-g5258 From 173bf69a7af142e0325fa514954f6eeb2d20cc1d Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 10 May 2012 00:37:48 +0200 Subject: ARM / mach-shmobile: Use preset_lpj with calibrate_delay() Update the mach-shmobile shared delay calibration code for late timers. All existing in-tree non-DT socs are however using early timers today and they are unaffected by this change. The patch modifies shmobile_setup_delay() from using lpj_fine to preset_lpj. This change allows us to preset the worst case loops-per-jiffy value to all CPU cores on the system. The old code which made use of lpj_fine did not affect the secondary CPU cores which made it impossible to boot on SMP without early timers. Needed for SMP SoCs using late timers like EMEV2 or any other mach-shmobile SMP SoC that makes use of late timers via DT. Signed-off-by: Magnus Damm Signed-off-by: Rafael J. Wysocki --- arch/arm/mach-shmobile/timer.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c index cba39d86668..a68919727e2 100644 --- a/arch/arm/mach-shmobile/timer.c +++ b/arch/arm/mach-shmobile/timer.c @@ -36,7 +36,8 @@ void __init shmobile_setup_delay(unsigned int max_cpu_core_mhz, unsigned int value = (1000000 * mult) / (HZ * div); - lpj_fine = max_cpu_core_mhz * value; + if (!preset_lpj) + preset_lpj = max_cpu_core_mhz * value; } static void __init shmobile_late_time_init(void) -- cgit v1.2.3-18-g5258 From 880452b616136c94c521c03adea07fd5ebe3ed24 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 1 Apr 2012 18:40:01 -0700 Subject: ARM: mach-shmobile: sh7372: Add FSI DMAEngine support Signed-off-by: Kuninori Morimoto Tested-by: Simon Horman Acked-by: Magnus Damm Signed-off-by: Rafael J. Wysocki --- arch/arm/mach-shmobile/include/mach/sh7372.h | 2 ++ arch/arm/mach-shmobile/setup-sh7372.c | 10 ++++++++++ 2 files changed, 12 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h index 8254ab86f6c..915d0093da0 100644 --- a/arch/arm/mach-shmobile/include/mach/sh7372.h +++ b/arch/arm/mach-shmobile/include/mach/sh7372.h @@ -457,6 +457,8 @@ enum { SHDMA_SLAVE_SDHI1_TX, SHDMA_SLAVE_SDHI2_RX, SHDMA_SLAVE_SDHI2_TX, + SHDMA_SLAVE_FSIA_RX, + SHDMA_SLAVE_FSIA_TX, SHDMA_SLAVE_MMCIF_RX, SHDMA_SLAVE_MMCIF_TX, SHDMA_SLAVE_USB0_TX, diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 4c7fece5ef9..6a4bd582c02 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -461,6 +461,16 @@ static const struct sh_dmae_slave_config sh7372_dmae_slaves[] = { .addr = 0xe6870030, .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT), .mid_rid = 0xce, + }, { + .slave_id = SHDMA_SLAVE_FSIA_TX, + .addr = 0xfe1f0024, + .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT), + .mid_rid = 0xb1, + }, { + .slave_id = SHDMA_SLAVE_FSIA_RX, + .addr = 0xfe1f0020, + .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT), + .mid_rid = 0xb2, }, { .slave_id = SHDMA_SLAVE_MMCIF_TX, .addr = 0xe6bd0034, -- cgit v1.2.3-18-g5258 From 9f6b78223b7b49bc06d2e84b15d48f02206ec3c3 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Fri, 6 Apr 2012 01:28:14 -0700 Subject: ARM: mach-shmobile: r8a7740: add gpio_irq support Signed-off-by: Kuninori Morimoto Tested-by: Simon Horman Acked-by: Magnus Damm Signed-off-by: Rafael J. Wysocki --- arch/arm/mach-shmobile/pfc-r8a7740.c | 39 ++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/pfc-r8a7740.c b/arch/arm/mach-shmobile/pfc-r8a7740.c index a4fff6950b0..670fe1869db 100644 --- a/arch/arm/mach-shmobile/pfc-r8a7740.c +++ b/arch/arm/mach-shmobile/pfc-r8a7740.c @@ -22,6 +22,7 @@ #include #include #include +#include #define CPU_ALL_PORT(fn, pfx, sfx) \ PORT_10(fn, pfx, sfx), PORT_90(fn, pfx, sfx), \ @@ -2527,6 +2528,41 @@ static struct pinmux_data_reg pinmux_data_regs[] = { { }, }; +static struct pinmux_irq pinmux_irqs[] = { + PINMUX_IRQ(evt2irq(0x0200), PORT2_FN0, PORT13_FN0), /* IRQ0A */ + PINMUX_IRQ(evt2irq(0x0220), PORT20_FN0), /* IRQ1A */ + PINMUX_IRQ(evt2irq(0x0240), PORT11_FN0, PORT12_FN0), /* IRQ2A */ + PINMUX_IRQ(evt2irq(0x0260), PORT10_FN0, PORT14_FN0), /* IRQ3A */ + PINMUX_IRQ(evt2irq(0x0280), PORT15_FN0, PORT172_FN0), /* IRQ4A */ + PINMUX_IRQ(evt2irq(0x02A0), PORT0_FN0, PORT1_FN0), /* IRQ5A */ + PINMUX_IRQ(evt2irq(0x02C0), PORT121_FN0, PORT173_FN0), /* IRQ6A */ + PINMUX_IRQ(evt2irq(0x02E0), PORT120_FN0, PORT209_FN0), /* IRQ7A */ + PINMUX_IRQ(evt2irq(0x0300), PORT119_FN0), /* IRQ8A */ + PINMUX_IRQ(evt2irq(0x0320), PORT118_FN0, PORT210_FN0), /* IRQ9A */ + PINMUX_IRQ(evt2irq(0x0340), PORT19_FN0), /* IRQ10A */ + PINMUX_IRQ(evt2irq(0x0360), PORT104_FN0), /* IRQ11A */ + PINMUX_IRQ(evt2irq(0x0380), PORT42_FN0, PORT97_FN0), /* IRQ12A */ + PINMUX_IRQ(evt2irq(0x03A0), PORT64_FN0, PORT98_FN0), /* IRQ13A */ + PINMUX_IRQ(evt2irq(0x03C0), PORT63_FN0, PORT99_FN0), /* IRQ14A */ + PINMUX_IRQ(evt2irq(0x03E0), PORT62_FN0, PORT100_FN0), /* IRQ15A */ + PINMUX_IRQ(evt2irq(0x3200), PORT68_FN0, PORT211_FN0), /* IRQ16A */ + PINMUX_IRQ(evt2irq(0x3220), PORT69_FN0), /* IRQ17A */ + PINMUX_IRQ(evt2irq(0x3240), PORT70_FN0), /* IRQ18A */ + PINMUX_IRQ(evt2irq(0x3260), PORT71_FN0), /* IRQ19A */ + PINMUX_IRQ(evt2irq(0x3280), PORT67_FN0), /* IRQ20A */ + PINMUX_IRQ(evt2irq(0x32A0), PORT202_FN0), /* IRQ21A */ + PINMUX_IRQ(evt2irq(0x32C0), PORT95_FN0), /* IRQ22A */ + PINMUX_IRQ(evt2irq(0x32E0), PORT96_FN0), /* IRQ23A */ + PINMUX_IRQ(evt2irq(0x3300), PORT180_FN0), /* IRQ24A */ + PINMUX_IRQ(evt2irq(0x3320), PORT38_FN0), /* IRQ25A */ + PINMUX_IRQ(evt2irq(0x3340), PORT58_FN0, PORT81_FN0), /* IRQ26A */ + PINMUX_IRQ(evt2irq(0x3360), PORT57_FN0, PORT168_FN0), /* IRQ27A */ + PINMUX_IRQ(evt2irq(0x3380), PORT56_FN0, PORT169_FN0), /* IRQ28A */ + PINMUX_IRQ(evt2irq(0x33A0), PORT50_FN0, PORT170_FN0), /* IRQ29A */ + PINMUX_IRQ(evt2irq(0x33C0), PORT49_FN0, PORT171_FN0), /* IRQ30A */ + PINMUX_IRQ(evt2irq(0x33E0), PORT41_FN0, PORT167_FN0), /* IRQ31A */ +}; + static struct pinmux_info r8a7740_pinmux_info = { .name = "r8a7740_pfc", .reserved_id = PINMUX_RESERVED, @@ -2554,6 +2590,9 @@ static struct pinmux_info r8a7740_pinmux_info = { .gpio_data = pinmux_data, .gpio_data_size = ARRAY_SIZE(pinmux_data), + + .gpio_irq = pinmux_irqs, + .gpio_irq_size = ARRAY_SIZE(pinmux_irqs), }; void r8a7740_pinmux_init(void) -- cgit v1.2.3-18-g5258 From 4228716c87f7915410721952bad3e568fb5f2431 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Fri, 13 Apr 2012 02:41:06 -0700 Subject: ARM: mach-shmobile: r8a7740: cleanup I2C workaround method Current workaround of I2C on r8a7740 used mdelay(), but it was an overkill. This patch cleans up the workaround delay. Signed-off-by: Kuninori Morimoto Tested-by: Simon Horman Acked-by: Magnus Damm Signed-off-by: Rafael J. Wysocki --- arch/arm/mach-shmobile/setup-r8a7740.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 14edb5cffa7..34a1548dbda 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -350,19 +350,19 @@ static void r8a7740_i2c_workaround(struct platform_device *pdev) i2c_write(reg, ICSTART, i2c_read(reg, ICSTART) | 0x10); i2c_read(reg, ICSTART); /* dummy read */ - mdelay(100); + udelay(10); i2c_write(reg, ICCR, 0x01); - i2c_read(reg, ICCR); i2c_write(reg, ICSTART, 0x00); - i2c_read(reg, ICSTART); + + udelay(10); i2c_write(reg, ICCR, 0x10); - mdelay(100); + udelay(10); i2c_write(reg, ICCR, 0x00); - mdelay(100); + udelay(10); i2c_write(reg, ICCR, 0x10); - mdelay(100); + udelay(10); iounmap(reg); } -- cgit v1.2.3-18-g5258 From 7ee8948d158946e52ea21562f2ceef268439f36e Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 1 Apr 2012 18:46:09 -0700 Subject: ARM: mach-shmobile: clock-r8a7740: add FSI clock Signed-off-by: Kuninori Morimoto Acked-by: Magnus Damm Signed-off-by: Rafael J. Wysocki --- arch/arm/mach-shmobile/clock-r8a7740.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c index 99c4d743a99..b6fa1b77a15 100644 --- a/arch/arm/mach-shmobile/clock-r8a7740.c +++ b/arch/arm/mach-shmobile/clock-r8a7740.c @@ -257,7 +257,7 @@ enum { MSTP222, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, - MSTP329, MSTP323, + MSTP329, MSTP328, MSTP323, MSTP_NR }; @@ -280,6 +280,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP200] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */ [MSTP329] = SH_CLK_MSTP32(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */ + [MSTP328] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 28, 0), /* FSI */ [MSTP323] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */ }; @@ -334,6 +335,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP230]), CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), + CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), }; -- cgit v1.2.3-18-g5258 From fcca3f0f007d97f095a3ebe8f209021b517309d2 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 24 Apr 2012 02:07:47 -0700 Subject: ARM: mach-shmobile: clock-r8a7740: add USB clock R8A7740 USB needs many clocks for workaround, and it has confusing name "usb24s" and "usb24". This "usb24s" will be used by other clocks. Signed-off-by: Kuninori Morimoto Tested-by: Simon Horman Acked-by: Magnus Damm Signed-off-by: Rafael J. Wysocki --- arch/arm/mach-shmobile/clock-r8a7740.c | 118 ++++++++++++++++++++++++++++++++- 1 file changed, 116 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c index b6fa1b77a15..b9b1d73ab9e 100644 --- a/arch/arm/mach-shmobile/clock-r8a7740.c +++ b/arch/arm/mach-shmobile/clock-r8a7740.c @@ -47,6 +47,7 @@ #define PLLC01CR 0xe6150028 #define SUBCKCR 0xe6150080 +#define USBCKCR 0xe615008c #define MSTPSR0 0xe6150030 #define MSTPSR1 0xe6150038 @@ -181,6 +182,100 @@ static struct clk pllc1_div2_clk = { .parent = &pllc1_clk, }; +/* USB clock */ +static struct clk *usb24s_parents[] = { + [0] = &system_clk, + [1] = &extal2_clk +}; + +static unsigned long usb24s_recalc(struct clk *clk) +{ + return clk->parent->rate; +}; + +static int usb24s_enable(struct clk *clk) +{ + __raw_writel(__raw_readl(USBCKCR) & ~(1 << 8), USBCKCR); + + return 0; +} + +static void usb24s_disable(struct clk *clk) +{ + __raw_writel(__raw_readl(USBCKCR) | (1 << 8), USBCKCR); +} + +static int usb24s_set_parent(struct clk *clk, struct clk *parent) +{ + int i, ret; + u32 val; + + if (!clk->parent_table || !clk->parent_num) + return -EINVAL; + + /* Search the parent */ + for (i = 0; i < clk->parent_num; i++) + if (clk->parent_table[i] == parent) + break; + + if (i == clk->parent_num) + return -ENODEV; + + ret = clk_reparent(clk, parent); + if (ret < 0) + return ret; + + val = __raw_readl(USBCKCR); + val &= ~(1 << 7); + val |= i << 7; + __raw_writel(val, USBCKCR); + + return 0; +} + +static struct sh_clk_ops usb24s_clk_ops = { + .recalc = usb24s_recalc, + .enable = usb24s_enable, + .disable = usb24s_disable, + .set_parent = usb24s_set_parent, +}; + +static struct clk usb24s_clk = { + .ops = &usb24s_clk_ops, + .parent_table = usb24s_parents, + .parent_num = ARRAY_SIZE(usb24s_parents), + .parent = &system_clk, +}; + +static unsigned long usb24_recalc(struct clk *clk) +{ + return clk->parent->rate / + ((__raw_readl(USBCKCR) & (1 << 6)) ? 1 : 2); +}; + +static int usb24_set_rate(struct clk *clk, unsigned long rate) +{ + u32 val; + + /* closer to which ? parent->rate or parent->rate/2 */ + val = __raw_readl(USBCKCR); + val &= ~(1 << 6); + val |= (rate > (clk->parent->rate / 4) * 3) << 6; + __raw_writel(val, USBCKCR); + + return 0; +} + +static struct sh_clk_ops usb24_clk_ops = { + .recalc = usb24_recalc, + .set_rate = usb24_set_rate, +}; + +static struct clk usb24_clk = { + .ops = &usb24_clk_ops, + .parent = &usb24s_clk, +}; + struct clk *main_clks[] = { &extalr_clk, &extal1_clk, @@ -196,6 +291,8 @@ struct clk *main_clks[] = { &pllc0_clk, &pllc1_clk, &pllc1_div2_clk, + &usb24s_clk, + &usb24_clk, }; static void div4_kick(struct clk *clk) @@ -223,7 +320,7 @@ static struct clk_div4_table div4_table = { enum { DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_HP, - DIV4_HPP, DIV4_S, DIV4_ZB, DIV4_M3, DIV4_CP, + DIV4_HPP, DIV4_USBP, DIV4_S, DIV4_ZB, DIV4_M3, DIV4_CP, DIV4_NR }; @@ -234,6 +331,7 @@ struct clk div4_clks[DIV4_NR] = { [DIV4_M1] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 4, 0x6fff, CLK_ENABLE_ON_INIT), [DIV4_HP] = SH_CLK_DIV4(&pllc1_clk, FRQCRB, 4, 0x6fff, 0), [DIV4_HPP] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 20, 0x6fff, 0), + [DIV4_USBP] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 16, 0x6fff, 0), [DIV4_S] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 12, 0x6fff, 0), [DIV4_ZB] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 8, 0x6fff, 0), [DIV4_M3] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 4, 0x6fff, 0), @@ -257,7 +355,9 @@ enum { MSTP222, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, - MSTP329, MSTP328, MSTP323, + MSTP329, MSTP328, MSTP323, MSTP320, + + MSTP416, MSTP407, MSTP406, MSTP_NR }; @@ -282,6 +382,11 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP329] = SH_CLK_MSTP32(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */ [MSTP328] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 28, 0), /* FSI */ [MSTP323] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */ + [MSTP320] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 20, 0), /* USBF */ + + [MSTP416] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR4, 16, 0), /* USBHOST */ + [MSTP407] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR4, 7, 0), /* USB-Func */ + [MSTP406] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR4, 6, 0), /* USB Phy */ }; static struct clk_lookup lookups[] = { @@ -300,6 +405,7 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("pllc0_clk", &pllc0_clk), CLKDEV_CON_ID("pllc1_clk", &pllc1_clk), CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk), + CLKDEV_CON_ID("usb24s", &usb24s_clk), /* DIV4 clocks */ CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]), @@ -337,6 +443,14 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), + CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP320]), + + /* ICK */ + CLKDEV_ICK_ID("host", "renesas_usbhs", &mstp_clks[MSTP416]), + CLKDEV_ICK_ID("func", "renesas_usbhs", &mstp_clks[MSTP407]), + CLKDEV_ICK_ID("phy", "renesas_usbhs", &mstp_clks[MSTP406]), + CLKDEV_ICK_ID("pci", "renesas_usbhs", &div4_clks[DIV4_USBP]), + CLKDEV_ICK_ID("usb24", "renesas_usbhs", &usb24_clk), }; void __init r8a7740_clock_init(u8 md_ck) -- cgit v1.2.3-18-g5258 From 19ad322de262c810463aeb8769c66474d8b68210 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 24 Apr 2012 02:08:11 -0700 Subject: ARM: mach-shmobile: clock-r8a7740: add SDHI clock Signed-off-by: Kuninori Morimoto Tested-by: Simon Horman Acked-by: Magnus Damm Signed-off-by: Rafael J. Wysocki --- arch/arm/mach-shmobile/clock-r8a7740.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c index b9b1d73ab9e..86f7147fdf2 100644 --- a/arch/arm/mach-shmobile/clock-r8a7740.c +++ b/arch/arm/mach-shmobile/clock-r8a7740.c @@ -356,8 +356,9 @@ enum { MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, MSTP329, MSTP328, MSTP323, MSTP320, + MSTP314, MSTP313, - MSTP416, MSTP407, MSTP406, + MSTP416, MSTP415, MSTP407, MSTP406, MSTP_NR }; @@ -383,8 +384,11 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP328] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 28, 0), /* FSI */ [MSTP323] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */ [MSTP320] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 20, 0), /* USBF */ + [MSTP314] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 14, 0), /* SDHI0 */ + [MSTP313] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 13, 0), /* SDHI1 */ [MSTP416] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR4, 16, 0), /* USBHOST */ + [MSTP415] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR4, 15, 0), /* SDHI2 */ [MSTP407] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR4, 7, 0), /* USB-Func */ [MSTP406] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR4, 6, 0), /* USB Phy */ }; @@ -444,6 +448,10 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP320]), + CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), + CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), + + CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP415]), /* ICK */ CLKDEV_ICK_ID("host", "renesas_usbhs", &mstp_clks[MSTP416]), -- cgit v1.2.3-18-g5258 From f2c2d7e9210c4a82336b208adc88630cd0e77f57 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 24 Apr 2012 02:08:29 -0700 Subject: ARM: mach-shmobile: clock-r8a7740: add MMCIF clock Signed-off-by: Kuninori Morimoto Tested-by: Simon Horman Acked-by: Magnus Damm Signed-off-by: Rafael J. Wysocki --- arch/arm/mach-shmobile/clock-r8a7740.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c index 86f7147fdf2..89a2f9dad3b 100644 --- a/arch/arm/mach-shmobile/clock-r8a7740.c +++ b/arch/arm/mach-shmobile/clock-r8a7740.c @@ -356,7 +356,7 @@ enum { MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, MSTP329, MSTP328, MSTP323, MSTP320, - MSTP314, MSTP313, + MSTP314, MSTP313, MSTP312, MSTP416, MSTP415, MSTP407, MSTP406, @@ -386,6 +386,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP320] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 20, 0), /* USBF */ [MSTP314] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 14, 0), /* SDHI0 */ [MSTP313] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 13, 0), /* SDHI1 */ + [MSTP312] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMC */ [MSTP416] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR4, 16, 0), /* USBHOST */ [MSTP415] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR4, 15, 0), /* SDHI2 */ @@ -450,6 +451,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP320]), CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), + CLKDEV_DEV_ID("sh_mmcif", &mstp_clks[MSTP312]), CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP415]), -- cgit v1.2.3-18-g5258 From c8241085e8606a14ef48e6d99556133c48aaddaf Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 6 May 2012 18:12:41 -0700 Subject: ARM: mach-shmobile: clock-r8a7740: use followparent_recalc on usb24s If the clocks is always same value as the parent clock, we can use followparent_recalc() for .recalc Reported-by: Paul Mundt Signed-off-by: Kuninori Morimoto Reviewed-by: Simon Horman Acked-by: Magnus Damm Signed-off-by: Rafael J. Wysocki --- arch/arm/mach-shmobile/clock-r8a7740.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c index 89a2f9dad3b..81b54a6af20 100644 --- a/arch/arm/mach-shmobile/clock-r8a7740.c +++ b/arch/arm/mach-shmobile/clock-r8a7740.c @@ -188,11 +188,6 @@ static struct clk *usb24s_parents[] = { [1] = &extal2_clk }; -static unsigned long usb24s_recalc(struct clk *clk) -{ - return clk->parent->rate; -}; - static int usb24s_enable(struct clk *clk) { __raw_writel(__raw_readl(USBCKCR) & ~(1 << 8), USBCKCR); @@ -234,7 +229,7 @@ static int usb24s_set_parent(struct clk *clk, struct clk *parent) } static struct sh_clk_ops usb24s_clk_ops = { - .recalc = usb24s_recalc, + .recalc = followparent_recalc, .enable = usb24s_enable, .disable = usb24s_disable, .set_parent = usb24s_set_parent, -- cgit v1.2.3-18-g5258 From 4da773193414788b52ae14bc246543390faca5ce Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 17 May 2012 00:25:14 +0200 Subject: ARM: mach-shmobile: sh73a0: fixup PINT/IRQ16-IRQ31 irq number conflict Current IRQ16-IRQ31 irq number are located around 800 from 1ee8299a9ec1ce5137a044c7768293007b9a3267 (ARM: mach-shmobile: Use 0x3400 as INTCS vector offset) But, the PINT0/1 IRQ number are also located around 800 from 0df1a838d678fc6ab49f983a19e905f6a42297a0 (ARM: mach-shmobile: sh73a0 PINT IRQ base fix) This patch relocates PINT0/1 IRQ number to around 700 where is not used, and adds current IRQ location table in comment area. Signed-off-by: Kuninori Morimoto Acked-by: Magnus Damm Signed-off-by: Rafael J. Wysocki --- arch/arm/mach-shmobile/include/mach/sh73a0.h | 34 +++++++++++++++++++++++++--- 1 file changed, 31 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h index cad57578cee..9b3598e4f10 100644 --- a/arch/arm/mach-shmobile/include/mach/sh73a0.h +++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h @@ -515,8 +515,36 @@ enum { SHDMA_SLAVE_MMCIF_RX, }; -/* PINT interrupts are located at Linux IRQ 800 and up */ -#define SH73A0_PINT0_IRQ(irq) ((irq) + 800) -#define SH73A0_PINT1_IRQ(irq) ((irq) + 832) +/* + * SH73A0 IRQ LOCATION TABLE + * + * 416 ----------------------------------------- + * IRQ0-IRQ15 + * 431 ----------------------------------------- + * ... + * 448 ----------------------------------------- + * sh73a0-intcs + * sh73a0-intca-irq-pins + * 680 ----------------------------------------- + * ... + * 700 ----------------------------------------- + * sh73a0-pint0 + * 731 ----------------------------------------- + * 732 ----------------------------------------- + * sh73a0-pint1 + * 739 ----------------------------------------- + * ... + * 800 ----------------------------------------- + * IRQ16-IRQ31 + * 815 ----------------------------------------- + * ... + * 928 ----------------------------------------- + * sh73a0-intca-irq-pins + * 943 ----------------------------------------- + */ + +/* PINT interrupts are located at Linux IRQ 700 and up */ +#define SH73A0_PINT0_IRQ(irq) ((irq) + 700) +#define SH73A0_PINT1_IRQ(irq) ((irq) + 732) #endif /* __ASM_SH73A0_H__ */ -- cgit v1.2.3-18-g5258 From 7f627f0380cb5ba3e05bcaac31ecf40c1f508ec1 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 16 May 2012 15:44:58 +0900 Subject: mach-shmobile: Emma Mobile EV2 SoC base support V3 This is V3 of the Emma Mobile EV2 SoC support. Included here is support for serial and timer devices which is just about enough to boot a kernel. Signed-off-by: Magnus Damm Signed-off-by: Rafael J. Wysocki --- arch/arm/mach-shmobile/Kconfig | 5 + arch/arm/mach-shmobile/Makefile | 1 + arch/arm/mach-shmobile/clock-emev2.c | 226 ++++++++++++++++++++++++++++ arch/arm/mach-shmobile/include/mach/emev2.h | 9 ++ arch/arm/mach-shmobile/setup-emev2.c | 180 ++++++++++++++++++++++ 5 files changed, 421 insertions(+) create mode 100644 arch/arm/mach-shmobile/clock-emev2.c create mode 100644 arch/arm/mach-shmobile/include/mach/emev2.h create mode 100644 arch/arm/mach-shmobile/setup-emev2.c (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 34560cab45d..fadafe3b4e8 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -41,6 +41,11 @@ config ARCH_R8A7779 select ARM_GIC select ARCH_WANT_OPTIONAL_GPIOLIB +config ARCH_EMEV2 + bool "Emma Mobile EV2" + select CPU_V7 + select ARM_GIC + comment "SH-Mobile Board Type" config MACH_G3EVM diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index e7c2590b75d..fd84aa2108a 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o clock-sh7372.o intc-sh7372.o obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o clock-sh73a0.o intc-sh73a0.o obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o clock-r8a7740.o intc-r8a7740.o obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o clock-r8a7779.o intc-r8a7779.o +obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o clock-emev2.o # SMP objects smp-y := platsmp.o headsmp.o diff --git a/arch/arm/mach-shmobile/clock-emev2.c b/arch/arm/mach-shmobile/clock-emev2.c new file mode 100644 index 00000000000..73a12165931 --- /dev/null +++ b/arch/arm/mach-shmobile/clock-emev2.c @@ -0,0 +1,226 @@ +/* + * Emma Mobile EV2 clock framework support + * + * Copyright (C) 2012 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include +#include +#include +#include +#include +#include + +#define EMEV2_SMU_BASE 0xe0110000 + +/* EMEV2 SMU registers */ +#define USIAU0_RSTCTRL 0x094 +#define USIBU1_RSTCTRL 0x0ac +#define USIBU2_RSTCTRL 0x0b0 +#define USIBU3_RSTCTRL 0x0b4 +#define STI_RSTCTRL 0x124 +#define USIAU0GCLKCTRL 0x4a0 +#define USIBU1GCLKCTRL 0x4b8 +#define USIBU2GCLKCTRL 0x4bc +#define USIBU3GCLKCTRL 0x04c0 +#define STIGCLKCTRL 0x528 +#define USIAU0SCLKDIV 0x61c +#define USIB2SCLKDIV 0x65c +#define USIB3SCLKDIV 0x660 +#define STI_CLKSEL 0x688 + +/* not pretty, but hey */ +static void __iomem *smu_base; + +static void emev2_smu_write(unsigned long value, int offs) +{ + BUG_ON(!smu_base || (offs >= PAGE_SIZE)); + iowrite32(value, smu_base + offs); +} + +static struct clk_mapping smu_mapping = { + .phys = EMEV2_SMU_BASE, + .len = PAGE_SIZE, +}; + +/* Fixed 32 KHz root clock from C32K pin */ +static struct clk c32k_clk = { + .rate = 32768, + .mapping = &smu_mapping, +}; + +/* PLL3 multiplies C32K with 7000 */ +static unsigned long pll3_recalc(struct clk *clk) +{ + return clk->parent->rate * 7000; +} + +static struct sh_clk_ops pll3_clk_ops = { + .recalc = pll3_recalc, +}; + +static struct clk pll3_clk = { + .ops = &pll3_clk_ops, + .parent = &c32k_clk, +}; + +static struct clk *main_clks[] = { + &c32k_clk, + &pll3_clk, +}; + +enum { SCLKDIV_USIAU0, SCLKDIV_USIBU2, SCLKDIV_USIBU1, SCLKDIV_USIBU3, + SCLKDIV_NR }; + +#define SCLKDIV(_reg, _shift) \ +{ \ + .parent = &pll3_clk, \ + .enable_reg = IOMEM(EMEV2_SMU_BASE + (_reg)), \ + .enable_bit = _shift, \ +} + +static struct clk sclkdiv_clks[SCLKDIV_NR] = { + [SCLKDIV_USIAU0] = SCLKDIV(USIAU0SCLKDIV, 0), + [SCLKDIV_USIBU2] = SCLKDIV(USIB2SCLKDIV, 16), + [SCLKDIV_USIBU1] = SCLKDIV(USIB2SCLKDIV, 0), + [SCLKDIV_USIBU3] = SCLKDIV(USIB3SCLKDIV, 0), +}; + +enum { GCLK_USIAU0_SCLK, GCLK_USIBU1_SCLK, GCLK_USIBU2_SCLK, GCLK_USIBU3_SCLK, + GCLK_STI_SCLK, + GCLK_NR }; + +#define GCLK_SCLK(_parent, _reg) \ +{ \ + .parent = _parent, \ + .enable_reg = IOMEM(EMEV2_SMU_BASE + (_reg)), \ + .enable_bit = 1, /* SCLK_GCC */ \ +} + +static struct clk gclk_clks[GCLK_NR] = { + [GCLK_USIAU0_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIAU0], + USIAU0GCLKCTRL), + [GCLK_USIBU1_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU1], + USIBU1GCLKCTRL), + [GCLK_USIBU2_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU2], + USIBU2GCLKCTRL), + [GCLK_USIBU3_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU3], + USIBU3GCLKCTRL), + [GCLK_STI_SCLK] = GCLK_SCLK(&c32k_clk, STIGCLKCTRL), +}; + +static int emev2_gclk_enable(struct clk *clk) +{ + iowrite32(ioread32(clk->mapped_reg) | (1 << clk->enable_bit), + clk->mapped_reg); + return 0; +} + +static void emev2_gclk_disable(struct clk *clk) +{ + iowrite32(ioread32(clk->mapped_reg) & ~(1 << clk->enable_bit), + clk->mapped_reg); +} + +static struct sh_clk_ops emev2_gclk_clk_ops = { + .enable = emev2_gclk_enable, + .disable = emev2_gclk_disable, + .recalc = followparent_recalc, +}; + +static int __init emev2_gclk_register(struct clk *clks, int nr) +{ + struct clk *clkp; + int ret = 0; + int k; + + for (k = 0; !ret && (k < nr); k++) { + clkp = clks + k; + clkp->ops = &emev2_gclk_clk_ops; + ret |= clk_register(clkp); + } + + return ret; +} + +static unsigned long emev2_sclkdiv_recalc(struct clk *clk) +{ + unsigned int sclk_div; + + sclk_div = (ioread32(clk->mapped_reg) >> clk->enable_bit) & 0xff; + + return clk->parent->rate / (sclk_div + 1); +} + +static struct sh_clk_ops emev2_sclkdiv_clk_ops = { + .recalc = emev2_sclkdiv_recalc, +}; + +static int __init emev2_sclkdiv_register(struct clk *clks, int nr) +{ + struct clk *clkp; + int ret = 0; + int k; + + for (k = 0; !ret && (k < nr); k++) { + clkp = clks + k; + clkp->ops = &emev2_sclkdiv_clk_ops; + ret |= clk_register(clkp); + } + + return ret; +} + +static struct clk_lookup lookups[] = { + CLKDEV_DEV_ID("serial8250-em.0", &gclk_clks[GCLK_USIAU0_SCLK]), + CLKDEV_DEV_ID("serial8250-em.1", &gclk_clks[GCLK_USIBU1_SCLK]), + CLKDEV_DEV_ID("serial8250-em.2", &gclk_clks[GCLK_USIBU2_SCLK]), + CLKDEV_DEV_ID("serial8250-em.3", &gclk_clks[GCLK_USIBU3_SCLK]), + CLKDEV_DEV_ID("em_sti.0", &gclk_clks[GCLK_STI_SCLK]), +}; + +void __init emev2_clock_init(void) +{ + int k, ret = 0; + + smu_base = ioremap(EMEV2_SMU_BASE, PAGE_SIZE); + BUG_ON(!smu_base); + + /* setup STI timer to run on 37.768 kHz and deassert reset */ + emev2_smu_write(0, STI_CLKSEL); + emev2_smu_write(1, STI_RSTCTRL); + + /* deassert reset for UART0->UART3 */ + emev2_smu_write(2, USIAU0_RSTCTRL); + emev2_smu_write(2, USIBU1_RSTCTRL); + emev2_smu_write(2, USIBU2_RSTCTRL); + emev2_smu_write(2, USIBU3_RSTCTRL); + + for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) + ret = clk_register(main_clks[k]); + + if (!ret) + ret = emev2_sclkdiv_register(sclkdiv_clks, SCLKDIV_NR); + + if (!ret) + ret = emev2_gclk_register(gclk_clks, GCLK_NR); + + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); + + if (!ret) + shmobile_clk_init(); + else + panic("failed to setup emev2 clocks\n"); +} diff --git a/arch/arm/mach-shmobile/include/mach/emev2.h b/arch/arm/mach-shmobile/include/mach/emev2.h new file mode 100644 index 00000000000..92646c1de61 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/emev2.h @@ -0,0 +1,9 @@ +#ifndef __ASM_EMEV2_H__ +#define __ASM_EMEV2_H__ + +extern void emev2_init_irq(void); +extern void emev2_add_early_devices(void); +extern void emev2_add_standard_devices(void); +extern void emev2_clock_init(void); + +#endif /* __ASM_EMEV2_H__ */ diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c new file mode 100644 index 00000000000..9fff6233691 --- /dev/null +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -0,0 +1,180 @@ +/* + * Emma Mobile EV2 processor support + * + * Copyright (C) 2012 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* UART */ +static struct resource uart0_resources[] = { + [0] = { + .start = 0xe1020000, + .end = 0xe1020037, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 40, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device uart0_device = { + .name = "serial8250-em", + .id = 0, + .num_resources = ARRAY_SIZE(uart0_resources), + .resource = uart0_resources, +}; + +static struct resource uart1_resources[] = { + [0] = { + .start = 0xe1030000, + .end = 0xe1030037, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 41, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device uart1_device = { + .name = "serial8250-em", + .id = 1, + .num_resources = ARRAY_SIZE(uart1_resources), + .resource = uart1_resources, +}; + +static struct resource uart2_resources[] = { + [0] = { + .start = 0xe1040000, + .end = 0xe1040037, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 42, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device uart2_device = { + .name = "serial8250-em", + .id = 2, + .num_resources = ARRAY_SIZE(uart2_resources), + .resource = uart2_resources, +}; + +static struct resource uart3_resources[] = { + [0] = { + .start = 0xe1050000, + .end = 0xe1050037, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 43, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device uart3_device = { + .name = "serial8250-em", + .id = 3, + .num_resources = ARRAY_SIZE(uart3_resources), + .resource = uart3_resources, +}; + +/* STI */ +static struct resource sti_resources[] = { + [0] = { + .name = "STI", + .start = 0xe0180000, + .end = 0xe0180053, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 157, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sti_device = { + .name = "em_sti", + .id = 0, + .resource = sti_resources, + .num_resources = ARRAY_SIZE(sti_resources), +}; + +static struct platform_device *emev2_early_devices[] __initdata = { + &uart0_device, + &uart1_device, + &uart2_device, + &uart3_device, +}; + +static struct platform_device *emev2_late_devices[] __initdata = { + &sti_device, +}; + +void __init emev2_add_standard_devices(void) +{ + emev2_clock_init(); + + platform_add_devices(emev2_early_devices, + ARRAY_SIZE(emev2_early_devices)); + + platform_add_devices(emev2_late_devices, + ARRAY_SIZE(emev2_late_devices)); +} + +void __init emev2_add_early_devices(void) +{ + shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */ + + early_platform_add_devices(emev2_early_devices, + ARRAY_SIZE(emev2_early_devices)); + + /* setup early console here as well */ + shmobile_setup_console(); +} + +void __init emev2_init_irq(void) +{ + void __iomem *gic_dist_base; + void __iomem *gic_cpu_base; + + /* Static mappings, never released */ + gic_dist_base = ioremap(0xe0028000, PAGE_SIZE); + gic_cpu_base = ioremap(0xe0020000, PAGE_SIZE); + BUG_ON(!gic_dist_base || !gic_cpu_base); + + /* Use GIC to handle interrupts */ + gic_init(0, 29, gic_dist_base, gic_cpu_base); +} -- cgit v1.2.3-18-g5258 From c050fb10c425cf189da5ca9b84e948ec2fc99049 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 16 May 2012 15:45:16 +0900 Subject: mach-shmobile: KZM9D board support V3 V3 of basic KZM9D board support. At this point a quite thin layer that makes use of the Emma Mobile EV2 SoC code. Signed-off-by: Magnus Damm Signed-off-by: Rafael J. Wysocki --- arch/arm/mach-shmobile/Kconfig | 4 ++++ arch/arm/mach-shmobile/Makefile | 1 + arch/arm/mach-shmobile/board-kzm9d.c | 36 ++++++++++++++++++++++++++++++++++++ 3 files changed, 41 insertions(+) create mode 100644 arch/arm/mach-shmobile/board-kzm9d.c (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index fadafe3b4e8..34c0343db11 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -103,6 +103,10 @@ config MACH_MARZEN depends on ARCH_R8A7779 select ARCH_REQUIRE_GPIOLIB +config MACH_KZM9D + bool "KZM9D board" + depends on ARCH_EMEV2 + comment "SH-Mobile System Configuration" config CPU_HAS_INTEVT diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index fd84aa2108a..87bc110a9be 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -50,6 +50,7 @@ obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o obj-$(CONFIG_MACH_KOTA2) += board-kota2.o obj-$(CONFIG_MACH_BONITO) += board-bonito.o obj-$(CONFIG_MACH_MARZEN) += board-marzen.o +obj-$(CONFIG_MACH_KZM9D) += board-kzm9d.o # Framework support obj-$(CONFIG_SMP) += $(smp-y) diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c new file mode 100644 index 00000000000..e743f902043 --- /dev/null +++ b/arch/arm/mach-shmobile/board-kzm9d.c @@ -0,0 +1,36 @@ +/* + * kzm9d board support + * + * Copyright (C) 2012 Renesas Solutions Corp. + * Copyright (C) 2012 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +MACHINE_START(KZM9D, "kzm9d") + .init_early = emev2_add_early_devices, + .nr_irqs = NR_IRQS_LEGACY, + .init_irq = emev2_init_irq, + .handle_irq = gic_handle_irq, + .init_machine = emev2_add_standard_devices, + .timer = &shmobile_timer, +MACHINE_END -- cgit v1.2.3-18-g5258 From bd5a875d90c878be4d23f54ea565253734ae2377 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 16 May 2012 15:45:25 +0900 Subject: mach-shmobile: Emma Mobile EV2 SMP support V3 This is V3 of Emma Mobile EV2 SMP support. At this point only the most basic form of SMP operation is supported. TWD and CPU Hotplug support is excluded. Tied to both the Emma Mobile EV2 and the KZM9D board due to the need to switch on board in platsmp.c and the newly introduced need for static mappings. The static mappings are needed to allow hardware acces early during boot when SMP is initialized. This early requirement forces us to also map in the SMU registers. Signed-off-by: Magnus Damm Signed-off-by: Rafael J. Wysocki --- arch/arm/mach-shmobile/Makefile | 1 + arch/arm/mach-shmobile/board-kzm9d.c | 1 + arch/arm/mach-shmobile/clock-emev2.c | 18 ++++++ arch/arm/mach-shmobile/include/mach/emev2.h | 7 +++ arch/arm/mach-shmobile/platsmp.c | 17 +++++ arch/arm/mach-shmobile/setup-emev2.c | 24 +++++++ arch/arm/mach-shmobile/smp-emev2.c | 97 +++++++++++++++++++++++++++++ 7 files changed, 165 insertions(+) create mode 100644 arch/arm/mach-shmobile/smp-emev2.c (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 87bc110a9be..c795335931c 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -19,6 +19,7 @@ smp-y := platsmp.o headsmp.o smp-$(CONFIG_HOTPLUG_CPU) += hotplug.o smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o smp-$(CONFIG_ARCH_R8A7779) += smp-r8a7779.o +smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o # Pinmux setup pfc-y := diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c index e743f902043..42fc4794c9e 100644 --- a/arch/arm/mach-shmobile/board-kzm9d.c +++ b/arch/arm/mach-shmobile/board-kzm9d.c @@ -27,6 +27,7 @@ #include MACHINE_START(KZM9D, "kzm9d") + .map_io = emev2_map_io, .init_early = emev2_add_early_devices, .nr_irqs = NR_IRQS_LEGACY, .init_irq = emev2_init_irq, diff --git a/arch/arm/mach-shmobile/clock-emev2.c b/arch/arm/mach-shmobile/clock-emev2.c index 73a12165931..5bc97de4a1e 100644 --- a/arch/arm/mach-shmobile/clock-emev2.c +++ b/arch/arm/mach-shmobile/clock-emev2.c @@ -40,6 +40,7 @@ #define USIB2SCLKDIV 0x65c #define USIB3SCLKDIV 0x660 #define STI_CLKSEL 0x688 +#define SMU_GENERAL_REG0 0x7c0 /* not pretty, but hey */ static void __iomem *smu_base; @@ -50,6 +51,11 @@ static void emev2_smu_write(unsigned long value, int offs) iowrite32(value, smu_base + offs); } +void emev2_set_boot_vector(unsigned long value) +{ + emev2_smu_write(value, SMU_GENERAL_REG0); +} + static struct clk_mapping smu_mapping = { .phys = EMEV2_SMU_BASE, .len = PAGE_SIZE, @@ -194,6 +200,18 @@ static struct clk_lookup lookups[] = { void __init emev2_clock_init(void) { int k, ret = 0; + static int is_setup; + + /* yuck, this is ugly as hell, but the non-smp case of clocks + * code is now designed to rely on ioremap() instead of static + * entity maps. in the case of smp we need access to the SMU + * register earlier than ioremap() is actually working without + * any static maps. to enable SMP in ugly but with dynamic + * mappings we have to call emev2_clock_init() from different + * places depending on UP and SMP... + */ + if (is_setup++) + return; smu_base = ioremap(EMEV2_SMU_BASE, PAGE_SIZE); BUG_ON(!smu_base); diff --git a/arch/arm/mach-shmobile/include/mach/emev2.h b/arch/arm/mach-shmobile/include/mach/emev2.h index 92646c1de61..3fc71841985 100644 --- a/arch/arm/mach-shmobile/include/mach/emev2.h +++ b/arch/arm/mach-shmobile/include/mach/emev2.h @@ -1,9 +1,16 @@ #ifndef __ASM_EMEV2_H__ #define __ASM_EMEV2_H__ +extern void emev2_map_io(void); extern void emev2_init_irq(void); extern void emev2_add_early_devices(void); extern void emev2_add_standard_devices(void); extern void emev2_clock_init(void); +extern void emev2_set_boot_vector(unsigned long value); +extern unsigned int emev2_get_core_count(void); +extern int emev2_platform_cpu_kill(unsigned int cpu); +extern void emev2_secondary_init(unsigned int cpu); +extern int emev2_boot_secondary(unsigned int cpu); +extern void emev2_smp_prepare_cpus(void); #endif /* __ASM_EMEV2_H__ */ diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c index 45fa3924c6a..959b021e52b 100644 --- a/arch/arm/mach-shmobile/platsmp.c +++ b/arch/arm/mach-shmobile/platsmp.c @@ -19,9 +19,11 @@ #include #include #include +#include #define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2()) #define is_r8a7779() machine_is_marzen() +#define is_emev2() machine_is_kzm9d() static unsigned int __init shmobile_smp_get_core_count(void) { @@ -31,6 +33,9 @@ static unsigned int __init shmobile_smp_get_core_count(void) if (is_r8a7779()) return r8a7779_get_core_count(); + if (is_emev2()) + return emev2_get_core_count(); + return 1; } @@ -41,6 +46,9 @@ static void __init shmobile_smp_prepare_cpus(void) if (is_r8a7779()) r8a7779_smp_prepare_cpus(); + + if (is_emev2()) + emev2_smp_prepare_cpus(); } int shmobile_platform_cpu_kill(unsigned int cpu) @@ -48,6 +56,9 @@ int shmobile_platform_cpu_kill(unsigned int cpu) if (is_r8a7779()) return r8a7779_platform_cpu_kill(cpu); + if (is_emev2()) + return emev2_platform_cpu_kill(cpu); + return 1; } @@ -60,6 +71,9 @@ void __cpuinit platform_secondary_init(unsigned int cpu) if (is_r8a7779()) r8a7779_secondary_init(cpu); + + if (is_emev2()) + emev2_secondary_init(cpu); } int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) @@ -70,6 +84,9 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) if (is_r8a7779()) return r8a7779_boot_secondary(cpu); + if (is_emev2()) + return emev2_boot_secondary(cpu); + return -ENOSYS; } diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index 9fff6233691..2a03a78abdd 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -34,6 +34,30 @@ #include #include +static struct map_desc emev2_io_desc[] __initdata = { +#ifdef CONFIG_SMP + /* 128K entity map for 0xe0100000 (SMU) */ + { + .virtual = 0xe0100000, + .pfn = __phys_to_pfn(0xe0100000), + .length = SZ_128K, + .type = MT_DEVICE + }, + /* 2M mapping for SCU + L2 controller */ + { + .virtual = 0xf0000000, + .pfn = __phys_to_pfn(0x1e000000), + .length = SZ_2M, + .type = MT_DEVICE + }, +#endif +}; + +void __init emev2_map_io(void) +{ + iotable_init(emev2_io_desc, ARRAY_SIZE(emev2_io_desc)); +} + /* UART */ static struct resource uart0_resources[] = { [0] = { diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c new file mode 100644 index 00000000000..6a35c4a31e6 --- /dev/null +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -0,0 +1,97 @@ +/* + * SMP support for Emma Mobile EV2 + * + * Copyright (C) 2012 Renesas Solutions Corp. + * Copyright (C) 2012 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define EMEV2_SCU_BASE 0x1e000000 + +static DEFINE_SPINLOCK(scu_lock); +static void __iomem *scu_base; + +static void modify_scu_cpu_psr(unsigned long set, unsigned long clr) +{ + unsigned long tmp; + + /* we assume this code is running on a different cpu + * than the one that is changing coherency setting */ + spin_lock(&scu_lock); + tmp = readl(scu_base + 8); + tmp &= ~clr; + tmp |= set; + writel(tmp, scu_base + 8); + spin_unlock(&scu_lock); + +} + +unsigned int __init emev2_get_core_count(void) +{ + if (!scu_base) { + scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE); + emev2_clock_init(); /* need ioremapped SMU */ + } + + WARN_ON_ONCE(!scu_base); + + return scu_base ? scu_get_core_count(scu_base) : 1; +} + +int emev2_platform_cpu_kill(unsigned int cpu) +{ + return 0; /* not supported yet */ +} + +void __cpuinit emev2_secondary_init(unsigned int cpu) +{ + gic_secondary_init(0); +} + +int __cpuinit emev2_boot_secondary(unsigned int cpu) +{ + cpu = cpu_logical_map(cpu); + + /* enable cache coherency */ + modify_scu_cpu_psr(0, 3 << (cpu * 8)); + + /* Tell ROM loader about our vector (in headsmp.S) */ + emev2_set_boot_vector(__pa(shmobile_secondary_vector)); + + gic_raise_softirq(cpumask_of(cpu), 1); + return 0; +} + +void __init emev2_smp_prepare_cpus(void) +{ + int cpu = cpu_logical_map(0); + + scu_enable(scu_base); + + /* enable cache coherency on CPU0 */ + modify_scu_cpu_psr(0, 3 << (cpu * 8)); +} -- cgit v1.2.3-18-g5258 From 088efd9273b5076a0aead479aa31f1066d182b3e Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 16 May 2012 15:45:34 +0900 Subject: mach-shmobile: Emma Mobile EV2 GPIO support V3 Tie in the Emma Mobile GPIO driver "em-gio" to support the GPIOs on Emma Mobile EV2. A static IRQ range is used to allow boards to hook up their platform devices to the GPIOs. DT support is still on the TODO for the GPIO driver, so only platform device support is included here. Signed-off-by: Magnus Damm Signed-off-by: Rafael J. Wysocki --- arch/arm/mach-shmobile/Kconfig | 1 + arch/arm/mach-shmobile/include/mach/emev2.h | 3 + arch/arm/mach-shmobile/setup-emev2.c | 203 ++++++++++++++++++++++++++++ 3 files changed, 207 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 34c0343db11..8d3c2b18524 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -45,6 +45,7 @@ config ARCH_EMEV2 bool "Emma Mobile EV2" select CPU_V7 select ARM_GIC + select ARCH_WANT_OPTIONAL_GPIOLIB comment "SH-Mobile Board Type" diff --git a/arch/arm/mach-shmobile/include/mach/emev2.h b/arch/arm/mach-shmobile/include/mach/emev2.h index 3fc71841985..e6b0c1bf4b7 100644 --- a/arch/arm/mach-shmobile/include/mach/emev2.h +++ b/arch/arm/mach-shmobile/include/mach/emev2.h @@ -13,4 +13,7 @@ extern void emev2_secondary_init(unsigned int cpu); extern int emev2_boot_secondary(unsigned int cpu); extern void emev2_smp_prepare_cpus(void); +#define EMEV2_GPIO_BASE 200 +#define EMEV2_GPIO_IRQ(n) (EMEV2_GPIO_BASE + (n)) + #endif /* __ASM_EMEV2_H__ */ diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index 2a03a78abdd..d40fede8c9b 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -156,6 +157,203 @@ static struct platform_device sti_device = { .num_resources = ARRAY_SIZE(sti_resources), }; + +/* GIO */ +static struct gpio_em_config gio0_config = { + .gpio_base = 0, + .irq_base = EMEV2_GPIO_IRQ(0), + .number_of_pins = 32, +}; + +static struct resource gio0_resources[] = { + [0] = { + .name = "GIO_000", + .start = 0xe0050000, + .end = 0xe005002b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "GIO_000", + .start = 0xe0050040, + .end = 0xe005005f, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = 99, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = 100, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device gio0_device = { + .name = "em_gio", + .id = 0, + .resource = gio0_resources, + .num_resources = ARRAY_SIZE(gio0_resources), + .dev = { + .platform_data = &gio0_config, + }, +}; + +static struct gpio_em_config gio1_config = { + .gpio_base = 32, + .irq_base = EMEV2_GPIO_IRQ(32), + .number_of_pins = 32, +}; + +static struct resource gio1_resources[] = { + [0] = { + .name = "GIO_032", + .start = 0xe0050080, + .end = 0xe00500ab, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "GIO_032", + .start = 0xe00500c0, + .end = 0xe00500df, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = 101, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = 102, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device gio1_device = { + .name = "em_gio", + .id = 1, + .resource = gio1_resources, + .num_resources = ARRAY_SIZE(gio1_resources), + .dev = { + .platform_data = &gio1_config, + }, +}; + +static struct gpio_em_config gio2_config = { + .gpio_base = 64, + .irq_base = EMEV2_GPIO_IRQ(64), + .number_of_pins = 32, +}; + +static struct resource gio2_resources[] = { + [0] = { + .name = "GIO_064", + .start = 0xe0050100, + .end = 0xe005012b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "GIO_064", + .start = 0xe0050140, + .end = 0xe005015f, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = 103, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = 104, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device gio2_device = { + .name = "em_gio", + .id = 2, + .resource = gio2_resources, + .num_resources = ARRAY_SIZE(gio2_resources), + .dev = { + .platform_data = &gio2_config, + }, +}; + +static struct gpio_em_config gio3_config = { + .gpio_base = 96, + .irq_base = EMEV2_GPIO_IRQ(96), + .number_of_pins = 32, +}; + +static struct resource gio3_resources[] = { + [0] = { + .name = "GIO_096", + .start = 0xe0050100, + .end = 0xe005012b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "GIO_096", + .start = 0xe0050140, + .end = 0xe005015f, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = 105, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = 106, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device gio3_device = { + .name = "em_gio", + .id = 3, + .resource = gio3_resources, + .num_resources = ARRAY_SIZE(gio3_resources), + .dev = { + .platform_data = &gio3_config, + }, +}; + +static struct gpio_em_config gio4_config = { + .gpio_base = 128, + .irq_base = EMEV2_GPIO_IRQ(128), + .number_of_pins = 31, +}; + +static struct resource gio4_resources[] = { + [0] = { + .name = "GIO_128", + .start = 0xe0050200, + .end = 0xe005022b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "GIO_128", + .start = 0xe0050240, + .end = 0xe005025f, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = 107, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = 108, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device gio4_device = { + .name = "em_gio", + .id = 4, + .resource = gio4_resources, + .num_resources = ARRAY_SIZE(gio4_resources), + .dev = { + .platform_data = &gio4_config, + }, +}; + static struct platform_device *emev2_early_devices[] __initdata = { &uart0_device, &uart1_device, @@ -165,6 +363,11 @@ static struct platform_device *emev2_early_devices[] __initdata = { static struct platform_device *emev2_late_devices[] __initdata = { &sti_device, + &gio0_device, + &gio1_device, + &gio2_device, + &gio3_device, + &gio4_device, }; void __init emev2_add_standard_devices(void) -- cgit v1.2.3-18-g5258 From 0c73f7bc124e1657a583d9dfb0d168a69005e2d3 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 16 May 2012 15:45:42 +0900 Subject: mach-shmobile: KZM9D board Ethernet support V3 Tie in the on-board Ethernet controller on KZM9D and make use of the GPIO controller for external IRQ pin support. Signed-off-by: Magnus Damm Signed-off-by: Rafael J. Wysocki --- arch/arm/mach-shmobile/board-kzm9d.c | 44 +++++++++++++++++++++++++++++++++++- 1 file changed, 43 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c index 42fc4794c9e..be81f0feba0 100644 --- a/arch/arm/mach-shmobile/board-kzm9d.c +++ b/arch/arm/mach-shmobile/board-kzm9d.c @@ -20,18 +20,60 @@ #include #include +#include +#include #include #include #include #include #include +/* Ether */ +static struct resource smsc911x_resources[] = { + [0] = { + .start = 0x20000000, + .end = 0x2000ffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = EMEV2_GPIO_IRQ(1), + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH, + }, +}; + +static struct smsc911x_platform_config smsc911x_platdata = { + .flags = SMSC911X_USE_32BIT, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, +}; + +static struct platform_device smsc91x_device = { + .name = "smsc911x", + .id = 0, + .dev = { + .platform_data = &smsc911x_platdata, + }, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, +}; + +static struct platform_device *kzm9d_devices[] __initdata = { + &smsc91x_device, +}; + +void __init kzm9d_add_standard_devices(void) +{ + emev2_add_standard_devices(); + + platform_add_devices(kzm9d_devices, ARRAY_SIZE(kzm9d_devices)); +} + MACHINE_START(KZM9D, "kzm9d") .map_io = emev2_map_io, .init_early = emev2_add_early_devices, .nr_irqs = NR_IRQS_LEGACY, .init_irq = emev2_init_irq, .handle_irq = gic_handle_irq, - .init_machine = emev2_add_standard_devices, + .init_machine = kzm9d_add_standard_devices, .timer = &shmobile_timer, MACHINE_END -- cgit v1.2.3-18-g5258 From 3d5de27174955702bc874302ba9e72d71d5acd58 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 16 May 2012 15:45:54 +0900 Subject: mach-shmobile: Emma Mobile EV2 DT support V3 This is EMEV2 DT support V3. The support is limited to whatever devices that are complied in the kernel. At this point we have UARTs handled by "em-uart" and a timer handled by "em-sti". Clocks and SMP are not supported. Signed-off-by: Magnus Damm Signed-off-by: Rafael J. Wysocki --- arch/arm/boot/dts/emev2.dtsi | 63 ++++++++++++++++++++++++++++++++++++ arch/arm/mach-shmobile/clock-emev2.c | 5 +++ arch/arm/mach-shmobile/setup-emev2.c | 47 ++++++++++++++++++++++++++- 3 files changed, 114 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/emev2.dtsi (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi new file mode 100644 index 00000000000..eb504a6c0f4 --- /dev/null +++ b/arch/arm/boot/dts/emev2.dtsi @@ -0,0 +1,63 @@ +/* + * Device Tree Source for the EMEV2 SoC + * + * Copyright (C) 2012 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "renesas,emev2"; + interrupt-parent = <&gic>; + + cpus { + cpu@0 { + compatible = "arm,cortex-a9"; + }; + cpu@1 { + compatible = "arm,cortex-a9"; + }; + }; + + gic: interrupt-controller@e0020000 { + compatible = "arm,cortex-a9-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0xe0028000 0x1000>, + <0xe0020000 0x0100>; + }; + + sti@e0180000 { + compatible = "renesas,em-sti"; + reg = <0xe0180000 0x54>; + interrupts = <0 125 0>; + }; + + uart@e1020000 { + compatible = "renesas,em-uart"; + reg = <0xe1020000 0x38>; + interrupts = <0 8 0>; + }; + + uart@e1030000 { + compatible = "renesas,em-uart"; + reg = <0xe1030000 0x38>; + interrupts = <0 9 0>; + }; + + uart@e1040000 { + compatible = "renesas,em-uart"; + reg = <0xe1040000 0x38>; + interrupts = <0 10 0>; + }; + + uart@e1050000 { + compatible = "renesas,em-uart"; + reg = <0xe1050000 0x38>; + interrupts = <0 11 0>; + }; +}; diff --git a/arch/arm/mach-shmobile/clock-emev2.c b/arch/arm/mach-shmobile/clock-emev2.c index 5bc97de4a1e..4710f1847bb 100644 --- a/arch/arm/mach-shmobile/clock-emev2.c +++ b/arch/arm/mach-shmobile/clock-emev2.c @@ -191,10 +191,15 @@ static int __init emev2_sclkdiv_register(struct clk *clks, int nr) static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("serial8250-em.0", &gclk_clks[GCLK_USIAU0_SCLK]), + CLKDEV_DEV_ID("e1020000.uart", &gclk_clks[GCLK_USIAU0_SCLK]), CLKDEV_DEV_ID("serial8250-em.1", &gclk_clks[GCLK_USIBU1_SCLK]), + CLKDEV_DEV_ID("e1030000.uart", &gclk_clks[GCLK_USIBU1_SCLK]), CLKDEV_DEV_ID("serial8250-em.2", &gclk_clks[GCLK_USIBU2_SCLK]), + CLKDEV_DEV_ID("e1040000.uart", &gclk_clks[GCLK_USIBU2_SCLK]), CLKDEV_DEV_ID("serial8250-em.3", &gclk_clks[GCLK_USIBU3_SCLK]), + CLKDEV_DEV_ID("e1050000.uart", &gclk_clks[GCLK_USIBU3_SCLK]), CLKDEV_DEV_ID("em_sti.0", &gclk_clks[GCLK_STI_SCLK]), + CLKDEV_DEV_ID("e0180000.sti", &gclk_clks[GCLK_STI_SCLK]), }; void __init emev2_clock_init(void) diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index d40fede8c9b..dae9aa68bb0 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -22,9 +22,11 @@ #include #include #include +#include #include #include #include +#include #include #include #include @@ -381,9 +383,14 @@ void __init emev2_add_standard_devices(void) ARRAY_SIZE(emev2_late_devices)); } -void __init emev2_add_early_devices(void) +void __init emev2_init_delay(void) { shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */ +} + +void __init emev2_add_early_devices(void) +{ + emev2_init_delay(); early_platform_add_devices(emev2_early_devices, ARRAY_SIZE(emev2_early_devices)); @@ -405,3 +412,41 @@ void __init emev2_init_irq(void) /* Use GIC to handle interrupts */ gic_init(0, 29, gic_dist_base, gic_cpu_base); } + +#ifdef CONFIG_USE_OF +static const struct of_dev_auxdata emev2_auxdata_lookup[] __initconst = { + { } +}; + +void __init emev2_add_standard_devices_dt(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, + emev2_auxdata_lookup, NULL); +} + +static const struct of_device_id emev2_dt_irq_match[] = { + { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, + {}, +}; + +static const char *emev2_boards_compat_dt[] __initdata = { + "renesas,emev2", + NULL, +}; + +void __init emev2_init_irq_dt(void) +{ + of_irq_init(emev2_dt_irq_match); +} + +DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)") + .init_early = emev2_init_delay, + .nr_irqs = NR_IRQS_LEGACY, + .init_irq = emev2_init_irq_dt, + .handle_irq = gic_handle_irq, + .init_machine = emev2_add_standard_devices_dt, + .timer = &shmobile_timer, + .dt_compat = emev2_boards_compat_dt, +MACHINE_END + +#endif /* CONFIG_USE_OF */ -- cgit v1.2.3-18-g5258 From 450cca47d65b7500ba05d56770adbf8c758dc87d Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 16 May 2012 15:46:03 +0900 Subject: mach-shmobile: Use DT_MACHINE for KZM9D V3 Use DT_MACHINE_START() on the emev2 based KZM9D board. Also include a tiny DTS file to describe the board and update the Kconfig dependencies to select CONFIG_USE_OF. Update the SMP glue code to use OF for matching. Signed-off-by: Magnus Damm Signed-off-by: Rafael J. Wysocki --- arch/arm/boot/dts/emev2-kzm9d.dts | 26 ++++++++++++++++++++++++++ arch/arm/mach-shmobile/Kconfig | 1 + arch/arm/mach-shmobile/board-kzm9d.c | 8 +++++++- arch/arm/mach-shmobile/platsmp.c | 3 ++- 4 files changed, 36 insertions(+), 2 deletions(-) create mode 100644 arch/arm/boot/dts/emev2-kzm9d.dts (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts new file mode 100644 index 00000000000..297e3baba71 --- /dev/null +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -0,0 +1,26 @@ +/* + * Device Tree Source for the KZM9D board + * + * Copyright (C) 2012 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ +/dts-v1/; + +/include/ "emev2.dtsi" + +/ { + model = "EMEV2 KZM9D Board"; + compatible = "renesas,kzm9d", "renesas,emev2"; + + memory { + device_type = "memory"; + reg = <0x40000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS1,115200n81"; + }; +}; diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 8d3c2b18524..7dcf08ee979 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -107,6 +107,7 @@ config MACH_MARZEN config MACH_KZM9D bool "KZM9D board" depends on ARCH_EMEV2 + select USE_OF comment "SH-Mobile System Configuration" diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c index be81f0feba0..7bc5e7d39f9 100644 --- a/arch/arm/mach-shmobile/board-kzm9d.c +++ b/arch/arm/mach-shmobile/board-kzm9d.c @@ -68,7 +68,12 @@ void __init kzm9d_add_standard_devices(void) platform_add_devices(kzm9d_devices, ARRAY_SIZE(kzm9d_devices)); } -MACHINE_START(KZM9D, "kzm9d") +static const char *kzm9d_boards_compat_dt[] __initdata = { + "renesas,kzm9d", + NULL, +}; + +DT_MACHINE_START(KZM9D_DT, "kzm9d") .map_io = emev2_map_io, .init_early = emev2_add_early_devices, .nr_irqs = NR_IRQS_LEGACY, @@ -76,4 +81,5 @@ MACHINE_START(KZM9D, "kzm9d") .handle_irq = gic_handle_irq, .init_machine = kzm9d_add_standard_devices, .timer = &shmobile_timer, + .dt_compat = kzm9d_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c index 959b021e52b..7006cdc8b8c 100644 --- a/arch/arm/mach-shmobile/platsmp.c +++ b/arch/arm/mach-shmobile/platsmp.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -23,7 +24,7 @@ #define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2()) #define is_r8a7779() machine_is_marzen() -#define is_emev2() machine_is_kzm9d() +#define is_emev2() of_machine_is_compatible("renesas,emev2") static unsigned int __init shmobile_smp_get_core_count(void) { -- cgit v1.2.3-18-g5258