From 82d63734ea0c7f656b8bf3a885f3626b04eb4180 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 12 May 2011 13:43:39 +0100 Subject: ARM: bcmring: convert to sp804 clocksource bcmring has a set of four sp804 timers incorporated, yet it has its own copy of the sp804 code. Convert its clocksource implementation to the standard sp804 support code. Cc: Jiandong Zheng Cc: Scott Branden Signed-off-by: Russell King --- arch/arm/Kconfig | 1 + arch/arm/mach-bcmring/core.c | 108 ++++++++++++++++++------------------------- 2 files changed, 45 insertions(+), 64 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 43f003a5a0f..903c9c4bd68 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -297,6 +297,7 @@ config ARCH_BCMRING depends on MMU select CPU_V6 select ARM_AMBA + select ARM_TIMER_SP804 select CLKDEV_LOOKUP select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c index eca20ed228b..2cb39890256 100644 --- a/arch/arm/mach-bcmring/core.c +++ b/arch/arm/mach-bcmring/core.c @@ -37,6 +37,7 @@ #include #include #include +#include #include #include @@ -97,6 +98,35 @@ static struct clk dummy_apb_pclk = { .mode = CLK_MODE_XTAL, }; +/* Timer 0 - 25 MHz, Timer3 at bus clock rate, typically 150-166 MHz */ +#if defined(CONFIG_ARCH_FPGA11107) +/* fpga cpu/bus are currently 30 times slower so scale frequency as well to */ +/* slow down Linux's sense of time */ +#define TIMER0_FREQUENCY_MHZ (tmrHw_LOW_FREQUENCY_MHZ * 30) +#define TIMER1_FREQUENCY_MHZ (tmrHw_LOW_FREQUENCY_MHZ * 30) +#define TIMER3_FREQUENCY_MHZ (tmrHw_HIGH_FREQUENCY_MHZ * 30) +#define TIMER3_FREQUENCY_KHZ (tmrHw_HIGH_FREQUENCY_HZ / 1000 * 30) +#else +#define TIMER0_FREQUENCY_MHZ tmrHw_LOW_FREQUENCY_MHZ +#define TIMER1_FREQUENCY_MHZ tmrHw_LOW_FREQUENCY_MHZ +#define TIMER3_FREQUENCY_MHZ tmrHw_HIGH_FREQUENCY_MHZ +#define TIMER3_FREQUENCY_KHZ (tmrHw_HIGH_FREQUENCY_HZ / 1000) +#endif + +static struct clk sp804_timer1_clk = { + .name = "sp804-timer-1", + .type = CLK_TYPE_PRIMARY, + .mode = CLK_MODE_XTAL, + .rate_hz = TIMER1_FREQUENCY_MHZ * 1000000, +}; + +static struct clk sp804_timer3_clk = { + .name = "sp804-timer-3", + .type = CLK_TYPE_PRIMARY, + .mode = CLK_MODE_XTAL, + .rate_hz = TIMER3_FREQUENCY_KHZ * 1000, +}; + static struct clk_lookup lookups[] = { { /* Bus clock */ .con_id = "apb_pclk", @@ -107,6 +137,14 @@ static struct clk_lookup lookups[] = { }, { /* UART1 */ .dev_id = "uartb", .clk = &uart_clk, + }, { /* SP804 timer 1 */ + .dev_id = "sp804", + .con_id = "timer1", + .clk = &sp804_timer1_clk, + }, { /* SP804 timer 3 */ + .dev_id = "sp804", + .con_id = "timer3", + .clk = &sp804_timer3_clk, } }; @@ -160,25 +198,10 @@ void __init bcmring_amba_init(void) /* * Where is the timer (VA)? */ -#define TIMER0_VA_BASE MM_IO_BASE_TMR -#define TIMER1_VA_BASE (MM_IO_BASE_TMR + 0x20) -#define TIMER2_VA_BASE (MM_IO_BASE_TMR + 0x40) -#define TIMER3_VA_BASE (MM_IO_BASE_TMR + 0x60) - -/* Timer 0 - 25 MHz, Timer3 at bus clock rate, typically 150-166 MHz */ -#if defined(CONFIG_ARCH_FPGA11107) -/* fpga cpu/bus are currently 30 times slower so scale frequency as well to */ -/* slow down Linux's sense of time */ -#define TIMER0_FREQUENCY_MHZ (tmrHw_LOW_FREQUENCY_MHZ * 30) -#define TIMER1_FREQUENCY_MHZ (tmrHw_LOW_FREQUENCY_MHZ * 30) -#define TIMER3_FREQUENCY_MHZ (tmrHw_HIGH_FREQUENCY_MHZ * 30) -#define TIMER3_FREQUENCY_KHZ (tmrHw_HIGH_FREQUENCY_HZ / 1000 * 30) -#else -#define TIMER0_FREQUENCY_MHZ tmrHw_LOW_FREQUENCY_MHZ -#define TIMER1_FREQUENCY_MHZ tmrHw_LOW_FREQUENCY_MHZ -#define TIMER3_FREQUENCY_MHZ tmrHw_HIGH_FREQUENCY_MHZ -#define TIMER3_FREQUENCY_KHZ (tmrHw_HIGH_FREQUENCY_HZ / 1000) -#endif +#define TIMER0_VA_BASE ((void __iomem *)MM_IO_BASE_TMR) +#define TIMER1_VA_BASE ((void __iomem *)(MM_IO_BASE_TMR + 0x20)) +#define TIMER2_VA_BASE ((void __iomem *)(MM_IO_BASE_TMR + 0x40)) +#define TIMER3_VA_BASE ((void __iomem *)(MM_IO_BASE_TMR + 0x60)) #define TICKS_PER_uSEC TIMER0_FREQUENCY_MHZ @@ -187,10 +210,7 @@ void __init bcmring_amba_init(void) * */ #define mSEC_1 1000 -#define mSEC_5 (mSEC_1 * 5) #define mSEC_10 (mSEC_1 * 10) -#define mSEC_25 (mSEC_1 * 25) -#define SEC_1 (mSEC_1 * 1000) /* * How long is the timer interval? @@ -277,53 +297,13 @@ static struct irqaction bcmring_timer_irq = { .handler = bcmring_timer_interrupt, }; -static cycle_t bcmring_get_cycles_timer1(struct clocksource *cs) -{ - return ~readl(TIMER1_VA_BASE + TIMER_VALUE); -} - -static cycle_t bcmring_get_cycles_timer3(struct clocksource *cs) -{ - return ~readl(TIMER3_VA_BASE + TIMER_VALUE); -} - -static struct clocksource clocksource_bcmring_timer1 = { - .name = "timer1", - .rating = 200, - .read = bcmring_get_cycles_timer1, - .mask = CLOCKSOURCE_MASK(32), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static struct clocksource clocksource_bcmring_timer3 = { - .name = "timer3", - .rating = 100, - .read = bcmring_get_cycles_timer3, - .mask = CLOCKSOURCE_MASK(32), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - static int __init bcmring_clocksource_init(void) { /* setup timer1 as free-running clocksource */ - writel(0, TIMER1_VA_BASE + TIMER_CTRL); - writel(0xffffffff, TIMER1_VA_BASE + TIMER_LOAD); - writel(0xffffffff, TIMER1_VA_BASE + TIMER_VALUE); - writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC, - TIMER1_VA_BASE + TIMER_CTRL); - - clocksource_register_khz(&clocksource_bcmring_timer1, - TIMER1_FREQUENCY_MHZ * 1000); + sp804_clocksource_init(TIMER1_VA_BASE, "timer1"); /* setup timer3 as free-running clocksource */ - writel(0, TIMER3_VA_BASE + TIMER_CTRL); - writel(0xffffffff, TIMER3_VA_BASE + TIMER_LOAD); - writel(0xffffffff, TIMER3_VA_BASE + TIMER_VALUE); - writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC, - TIMER3_VA_BASE + TIMER_CTRL); - - clocksource_register_khz(&clocksource_bcmring_timer3, - TIMER3_FREQUENCY_KHZ); + sp804_clocksource_init(TIMER3_VA_BASE, "timer3"); return 0; } -- cgit v1.2.3-18-g5258