From 963151f2471d0e6475d8b2d3a005417aec1766f7 Mon Sep 17 00:00:00 2001
From: Andrew Victor <andrew@sanpeople.com>
Date: Mon, 19 Jun 2006 15:23:41 +0100
Subject: [ARM] 3579/1: AT91RM9200 Timer simplification

Patch from Andrew Victor

Use a global variable 'last_crtr' to store the time of the last timer
tick instead of the ST_RTAR register.
It's faster, frees up the ST_RTAR register for other uses, and hopefully
makes the code more understandable.  [Patch from Peter Menzebach]

Also add the SA_TIMER flag to Timer IRQ.  (It seems to be required for
the realtime preempt patch).

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91rm9200/time.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91rm9200/time.c b/arch/arm/mach-at91rm9200/time.c
index 7ffcf443b99..36798a8d532 100644
--- a/arch/arm/mach-at91rm9200/time.c
+++ b/arch/arm/mach-at91rm9200/time.c
@@ -31,6 +31,8 @@
 #include <asm/irq.h>
 #include <asm/mach/time.h>
 
+static unsigned long last_crtr;
+
 /*
  * The ST_CRTR is updated asynchronously to the master clock.  It is therefore
  *  necessary to read it twice (with the same value) to ensure accuracy.
@@ -56,7 +58,7 @@ static unsigned long at91rm9200_gettimeoffset(void)
 {
 	unsigned long elapsed;
 
-	elapsed = (read_CRTR() - at91_sys_read(AT91_ST_RTAR)) & AT91_ST_ALMV;
+	elapsed = (read_CRTR() - last_crtr) & AT91_ST_ALMV;
 
 	return (unsigned long)(elapsed * (tick_nsec / 1000)) / LATCH;
 }
@@ -66,15 +68,12 @@ static unsigned long at91rm9200_gettimeoffset(void)
  */
 static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
-	unsigned long rtar;
-
 	if (at91_sys_read(AT91_ST_SR) & AT91_ST_PITS) {	/* This is a shared interrupt */
 		write_seqlock(&xtime_lock);
 
-		while (((read_CRTR() - at91_sys_read(AT91_ST_RTAR)) & AT91_ST_ALMV) >= LATCH) {
+		while (((read_CRTR() - last_crtr) & AT91_ST_ALMV) >= LATCH) {
 			timer_tick(regs);
-			rtar = (at91_sys_read(AT91_ST_RTAR) + LATCH) & AT91_ST_ALMV;
-			at91_sys_write(AT91_ST_RTAR, rtar);
+			last_crtr = (last_crtr + LATCH) & AT91_ST_ALMV;
 		}
 
 		write_sequnlock(&xtime_lock);
@@ -87,7 +86,7 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id, struct pt_r
 
 static struct irqaction at91rm9200_timer_irq = {
 	.name		= "at91_tick",
-	.flags		= SA_SHIRQ | SA_INTERRUPT,
+	.flags		= SA_SHIRQ | SA_INTERRUPT | SA_TIMER,
 	.handler	= at91rm9200_timer_interrupt
 };
 
-- 
cgit v1.2.3-18-g5258


From 2a6f9902c6a799a9c0218b37e39b75690c3b9a70 Mon Sep 17 00:00:00 2001
From: Andrew Victor <andrew@sanpeople.com>
Date: Mon, 19 Jun 2006 15:26:50 +0100
Subject: [ARM] 3580/1: AT91RM9200 Timer suspend/resume support

Patch from Andrew Victor

Added suspend/resume support for the AT91RM9200 timer.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91rm9200/time.c | 44 ++++++++++++++++++++++++++++-------------
 1 file changed, 30 insertions(+), 14 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91rm9200/time.c b/arch/arm/mach-at91rm9200/time.c
index 36798a8d532..fc2d7d5e463 100644
--- a/arch/arm/mach-at91rm9200/time.c
+++ b/arch/arm/mach-at91rm9200/time.c
@@ -90,6 +90,20 @@ static struct irqaction at91rm9200_timer_irq = {
 	.handler	= at91rm9200_timer_interrupt
 };
 
+void at91rm9200_timer_reset(void)
+{
+	last_crtr = 0;
+
+	/* Real time counter incremented every 30.51758 microseconds */
+	at91_sys_write(AT91_ST_RTMR, 1);
+
+	/* Set Period Interval timer */
+	at91_sys_write(AT91_ST_PIMR, LATCH);
+
+	/* Enable Period Interval Timer interrupt */
+	at91_sys_write(AT91_ST_IER, AT91_ST_PITS);
+}
+
 /*
  * Set up timer interrupt.
  */
@@ -99,28 +113,30 @@ void __init at91rm9200_timer_init(void)
 	at91_sys_write(AT91_ST_IDR, AT91_ST_PITS | AT91_ST_WDOVF | AT91_ST_RTTINC | AT91_ST_ALMS);
 	(void) at91_sys_read(AT91_ST_SR);	/* Clear any pending interrupts */
 
-	/*
-	 * Make IRQs happen for the system timer.
-	 */
+	/* Make IRQs happen for the system timer */
 	setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq);
 
-	/* Set initial alarm to 0 */
-	at91_sys_write(AT91_ST_RTAR, 0);
-
-	/* Real time counter incremented every 30.51758 microseconds */
-	at91_sys_write(AT91_ST_RTMR, 1);
-
-	/* Set Period Interval timer */
-	at91_sys_write(AT91_ST_PIMR, LATCH);
-
 	/* Change the kernel's 'tick' value to 10009 usec. (the default is 10000) */
 	tick_usec = (LATCH * 1000000) / CLOCK_TICK_RATE;
 
-	/* Enable Period Interval Timer interrupt */
-	at91_sys_write(AT91_ST_IER, AT91_ST_PITS);
+	/* Initialize and enable the timer interrupt */
+	at91rm9200_timer_reset();
+}
+
+#ifdef CONFIG_PM
+static void at91rm9200_timer_suspend(void)
+{
+	/* disable Period Interval Timer interrupt */
+	at91_sys_write(AT91_ST_IDR, AT91_ST_PITS);
 }
+#else
+#define at91rm9200_timer_suspend	NULL
+#endif
 
 struct sys_timer at91rm9200_timer = {
 	.init		= at91rm9200_timer_init,
 	.offset		= at91rm9200_gettimeoffset,
+	.suspend	= at91rm9200_timer_suspend,
+	.resume		= at91rm9200_timer_reset,
 };
+
-- 
cgit v1.2.3-18-g5258


From 10e8e1fb758eed5cfb0cae1b770f842624851e7b Mon Sep 17 00:00:00 2001
From: Andrew Victor <andrew@sanpeople.com>
Date: Mon, 19 Jun 2006 15:26:51 +0100
Subject: [ARM] 3581/1: AT91RM9200 Internal SRAM

Patch from Andrew Victor

This patch maps the AT91RM9200's internal SRAM into the virtual memory
address space - just below the internal peripheral registers.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91rm9200/common.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91rm9200/common.c b/arch/arm/mach-at91rm9200/common.c
index 3848fd2d559..40d29a73b5c 100644
--- a/arch/arm/mach-at91rm9200/common.c
+++ b/arch/arm/mach-at91rm9200/common.c
@@ -17,6 +17,7 @@
 #include <asm/mach/map.h>
 
 #include <asm/arch/hardware.h>
+#include "generic.h"
 
 static struct map_desc at91rm9200_io_desc[] __initdata = {
 	{
@@ -94,6 +95,11 @@ static struct map_desc at91rm9200_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(AT91_BASE_TCB0),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
+	}, {
+		.virtual	= AT91_SRAM_VIRT_BASE,
+		.pfn		= __phys_to_pfn(AT91_SRAM_BASE),
+		.length		= AT91_SRAM_SIZE,
+		.type		= MT_DEVICE,
 	},
 };
 
-- 
cgit v1.2.3-18-g5258


From 37f2e4bc120bd784e7f69f961233e1c16b74d170 Mon Sep 17 00:00:00 2001
From: Andrew Victor <andrew@sanpeople.com>
Date: Mon, 19 Jun 2006 15:26:52 +0100
Subject: [ARM] 3582/1: AT91RM9200 IRQ trigger types

Patch from Andrew Victor

The AIC interrupt controller's set_irq_type() can also be used for
internal interrupts.  IRQT_LOW and IRQT_FALLING are the only options not
supported for the internal interrupts.

[Original patch from Karl Olsen]

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91rm9200/irq.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91rm9200/irq.c b/arch/arm/mach-at91rm9200/irq.c
index cb62bc83a1d..cc545b2c438 100644
--- a/arch/arm/mach-at91rm9200/irq.c
+++ b/arch/arm/mach-at91rm9200/irq.c
@@ -92,10 +92,6 @@ static int at91rm9200_irq_type(unsigned irq, unsigned type)
 {
 	unsigned int smr, srctype;
 
-	/* change triggering only for FIQ and external IRQ0..IRQ6 */
-	if ((irq < AT91_ID_IRQ0) && (irq != AT91_ID_FIQ))
-		return -EINVAL;
-
 	switch (type) {
 	case IRQT_HIGH:
 		srctype = AT91_AIC_SRCTYPE_HIGH;
@@ -104,9 +100,13 @@ static int at91rm9200_irq_type(unsigned irq, unsigned type)
 		srctype = AT91_AIC_SRCTYPE_RISING;
 		break;
 	case IRQT_LOW:
+		if ((irq > AT91_ID_FIQ) && (irq < AT91_ID_IRQ0))	/* only supported on external interrupts */
+			return -EINVAL;
 		srctype = AT91_AIC_SRCTYPE_LOW;
 		break;
 	case IRQT_FALLING:
+		if ((irq > AT91_ID_FIQ) && (irq < AT91_ID_IRQ0))	/* only supported on external interrupts */
+			return -EINVAL;
 		srctype = AT91_AIC_SRCTYPE_FALLING;
 		break;
 	default:
-- 
cgit v1.2.3-18-g5258


From 683c66bf75ce277b90d658da0c1a0bf1a55cce4c Mon Sep 17 00:00:00 2001
From: Andrew Victor <andrew@sanpeople.com>
Date: Mon, 19 Jun 2006 15:26:53 +0100
Subject: [ARM] 3583/1: AT91RM9200 IRQ suspend/resume support

Patch from Andrew Victor

Added suspend/resume/set_wake support for the AT91RM9200's AIC interrupt
controller.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91rm9200/irq.c | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91rm9200/irq.c b/arch/arm/mach-at91rm9200/irq.c
index cc545b2c438..70f4d7ac153 100644
--- a/arch/arm/mach-at91rm9200/irq.c
+++ b/arch/arm/mach-at91rm9200/irq.c
@@ -118,11 +118,47 @@ static int at91rm9200_irq_type(unsigned irq, unsigned type)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+
+static u32 wakeups;
+static u32 backups;
+
+static int at91rm9200_irq_set_wake(unsigned irq, unsigned value)
+{
+	if (unlikely(irq >= 32))
+		return -EINVAL;
+
+	if (value)
+		wakeups |= (1 << irq);
+	else
+		wakeups &= ~(1 << irq);
+
+	return 0;
+}
+
+void at91_irq_suspend(void)
+{
+	backups = at91_sys_read(AT91_AIC_IMR);
+	at91_sys_write(AT91_AIC_IDCR, backups);
+	at91_sys_write(AT91_AIC_IECR, wakeups);
+}
+
+void at91_irq_resume(void)
+{
+	at91_sys_write(AT91_AIC_IDCR, wakeups);
+	at91_sys_write(AT91_AIC_IECR, backups);
+}
+
+#else
+#define at91rm9200_irq_set_wake	NULL
+#endif
+
 static struct irqchip at91rm9200_irq_chip = {
 	.ack		= at91rm9200_mask_irq,
 	.mask		= at91rm9200_mask_irq,
 	.unmask		= at91rm9200_unmask_irq,
 	.set_type	= at91rm9200_irq_type,
+	.set_wake	= at91rm9200_irq_set_wake,
 };
 
 /*
-- 
cgit v1.2.3-18-g5258


From 814138ffa488824393d2f49f2720dcd197a7d4cf Mon Sep 17 00:00:00 2001
From: Andrew Victor <andrew@sanpeople.com>
Date: Mon, 19 Jun 2006 15:26:54 +0100
Subject: [ARM] 3584/1: AT91RM9200 GPIO suspend/resume support

Patch from Andrew Victor

This patch adds suspend/resume/set_wake support for the AT91RM9200's
GPIO interrupts.

Original patch from David Brownell.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91rm9200/gpio.c | 87 +++++++++++++++++++++++++++++++++++++++--
 1 file changed, 84 insertions(+), 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91rm9200/gpio.c
index 5ab46274e1a..3430ea05466 100644
--- a/arch/arm/mach-at91rm9200/gpio.c
+++ b/arch/arm/mach-at91rm9200/gpio.c
@@ -213,6 +213,84 @@ EXPORT_SYMBOL(at91_get_gpio_value);
 
 /*--------------------------------------------------------------------------*/
 
+#ifdef CONFIG_PM
+
+static u32 wakeups[BGA_GPIO_BANKS];
+static u32 backups[BGA_GPIO_BANKS];
+
+static int gpio_irq_set_wake(unsigned pin, unsigned state)
+{
+	unsigned	mask = pin_to_mask(pin);
+
+	pin -= PIN_BASE;
+	pin /= 32;
+
+	if (unlikely(pin >= BGA_GPIO_BANKS))
+		return -EINVAL;
+
+	if (state)
+		wakeups[pin] |= mask;
+	else
+		wakeups[pin] &= ~mask;
+
+	return 0;
+}
+
+void at91_gpio_suspend(void)
+{
+	int i;
+
+	for (i = 0; i < BGA_GPIO_BANKS; i++) {
+		u32 pio = pio_controller_offset[i];
+
+		/*
+		 * Note: drivers should have disabled GPIO interrupts that
+		 * aren't supposed to be wakeup sources.
+		 * But that is not much good on ARM.....  disable_irq() does
+		 * not update the hardware immediately, so the hardware mask
+		 * (IMR) has the wrong value (not current, too much is
+		 * permitted).
+		 *
+		 * Our workaround is to disable all non-wakeup IRQs ...
+		 * which is exactly what correct drivers asked for in the
+		 * first place!
+		 */
+		backups[i] = at91_sys_read(pio + PIO_IMR);
+		at91_sys_write(pio_controller_offset[i] + PIO_IDR, backups[i]);
+		at91_sys_write(pio_controller_offset[i] + PIO_IER, wakeups[i]);
+
+		if (!wakeups[i]) {
+			disable_irq_wake(AT91_ID_PIOA + i);
+			at91_sys_write(AT91_PMC_PCDR, 1 << (AT91_ID_PIOA + i));
+		} else {
+			enable_irq_wake(AT91_ID_PIOA + i);
+#ifdef CONFIG_PM_DEBUG
+			printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", "ABCD"[i], wakeups[i]);
+#endif
+		}
+	}
+}
+
+void at91_gpio_resume(void)
+{
+	int i;
+
+	for (i = 0; i < BGA_GPIO_BANKS; i++) {
+		at91_sys_write(pio_controller_offset[i] + PIO_IDR, wakeups[i]);
+		at91_sys_write(pio_controller_offset[i] + PIO_IER, backups[i]);
+	}
+
+	at91_sys_write(AT91_PMC_PCER,
+			  (1 << AT91_ID_PIOA)
+			| (1 << AT91_ID_PIOB)
+			| (1 << AT91_ID_PIOC)
+			| (1 << AT91_ID_PIOD));
+}
+
+#else
+#define gpio_irq_set_wake	NULL
+#endif
+
 
 /* Several AIC controller irqs are dispatched through this GPIO handler.
  * To use any AT91_PIN_* as an externally triggered IRQ, first call
@@ -252,6 +330,7 @@ static struct irqchip gpio_irqchip = {
 	.mask		= gpio_irq_mask,
 	.unmask		= gpio_irq_unmask,
 	.set_type	= gpio_irq_type,
+	.set_wake	= gpio_irq_set_wake,
 };
 
 static void gpio_irq_handler(unsigned irq, struct irqdesc *desc, struct pt_regs *regs)
@@ -266,6 +345,7 @@ static void gpio_irq_handler(unsigned irq, struct irqdesc *desc, struct pt_regs
 	/* temporarily mask (level sensitive) parent IRQ */
 	desc->chip->ack(irq);
 	for (;;) {
+		/* reading ISR acks the pending (edge triggered) GPIO interrupt */
 		isr = __raw_readl(pio + PIO_ISR) & __raw_readl(pio + PIO_IMR);
 		if (!isr)
 			break;
@@ -315,15 +395,16 @@ void __init at91_gpio_irq_setup(unsigned banks)
 		set_irq_chipdata(id, controller);
 
 		for (i = 0; i < 32; i++, pin++) {
+			/*
+			 * Can use the "simple" and not "edge" handler since it's
+			 * shorter, and the AIC handles interupts sanely.
+			 */
 			set_irq_chip(pin, &gpio_irqchip);
 			set_irq_handler(pin, do_simple_IRQ);
 			set_irq_flags(pin, IRQF_VALID);
 		}
 
 		set_irq_chained_handler(id, gpio_irq_handler);
-
-		/* enable the PIO peripheral clock */
-		at91_sys_write(AT91_PMC_PCER, 1 << id);
 	}
 	pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, banks);
 }
-- 
cgit v1.2.3-18-g5258


From 2e83640270b4a76a3855131953c82bbc1919e589 Mon Sep 17 00:00:00 2001
From: Andrew Victor <andrew@sanpeople.com>
Date: Mon, 19 Jun 2006 16:31:55 +0100
Subject: [ARM] 3585/1: AT91RM9200 Platform devices

Patch from Andrew Victor

This patch updates the platform device support for the AT91RM9200.

The changes include:

1. USB Host device renamed to "at91_ohci" since the driver is also
usable on the AT91SAM9261 processor.
2. Enabling multidrive on the USB Device's pullup pin should not be done
for all boards.  Moved into board-specific files.  [Patch from David
Brownell]
3. Move enabling of PCMCIA/Compact Flash pins out of the driver.
4. Added SPI device and resources.
5. Added Watchdog device and resources.  [Patch from David Brownell]
6. Added UART device and resources.
7. The simple devices (watchdog, rtc, i2c) are now automatically
registered and don't have to be registered separately in each
board-specific file. [Patch from David Brownell]

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91rm9200/devices.c | 406 +++++++++++++++++++++++++++++++++++--
 1 file changed, 389 insertions(+), 17 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91rm9200/devices.c b/arch/arm/mach-at91rm9200/devices.c
index bfe47bd6e50..bf753e306a3 100644
--- a/arch/arm/mach-at91rm9200/devices.c
+++ b/arch/arm/mach-at91rm9200/devices.c
@@ -16,9 +16,15 @@
 #include <linux/config.h>
 #include <linux/platform_device.h>
 
+#include <asm/arch/hardware.h>
 #include <asm/arch/board.h>
-#include <asm/arch/pio.h>
+#include <asm/arch/gpio.h>
 
+#include "generic.h"
+
+#define SZ_512	0x00000200
+#define SZ_256	0x00000100
+#define SZ_16	0x00000010
 
 /* --------------------------------------------------------------------
  *  USB Host
@@ -28,7 +34,7 @@
 static u64 ohci_dmamask = 0xffffffffUL;
 static struct at91_usbh_data usbh_data;
 
-static struct resource at91_usbh_resource[] = {
+static struct resource at91_usbh_resources[] = {
 	[0] = {
 		.start	= AT91_UHP_BASE,
 		.end	= AT91_UHP_BASE + SZ_1M - 1,
@@ -42,15 +48,15 @@ static struct resource at91_usbh_resource[] = {
 };
 
 static struct platform_device at91rm9200_usbh_device = {
-	.name		= "at91rm9200-ohci",
+	.name		= "at91_ohci",
 	.id		= -1,
 	.dev		= {
 				.dma_mask		= &ohci_dmamask,
 				.coherent_dma_mask	= 0xffffffff,
 				.platform_data		= &usbh_data,
 	},
-	.resource	= at91_usbh_resource,
-	.num_resources	= ARRAY_SIZE(at91_usbh_resource),
+	.resource	= at91_usbh_resources,
+	.num_resources	= ARRAY_SIZE(at91_usbh_resources),
 };
 
 void __init at91_add_device_usbh(struct at91_usbh_data *data)
@@ -74,11 +80,16 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
 static struct at91_udc_data udc_data;
 
 static struct resource at91_udc_resources[] = {
-	{
+	[0] = {
 		.start	= AT91_BASE_UDP,
 		.end	= AT91_BASE_UDP + SZ_16K - 1,
 		.flags	= IORESOURCE_MEM,
-	}
+	},
+	[1] = {
+		.start	= AT91_ID_UDP,
+		.end	= AT91_ID_UDP,
+		.flags	= IORESOURCE_IRQ,
+	},
 };
 
 static struct platform_device at91rm9200_udc_device = {
@@ -100,10 +111,8 @@ void __init at91_add_device_udc(struct at91_udc_data *data)
 		at91_set_gpio_input(data->vbus_pin, 0);
 		at91_set_deglitch(data->vbus_pin, 1);
 	}
-	if (data->pullup_pin) {
+	if (data->pullup_pin)
 		at91_set_gpio_output(data->pullup_pin, 0);
-		at91_set_multi_drive(data->pullup_pin, 1);
-	}
 
 	udc_data = *data;
 	platform_device_register(&at91rm9200_udc_device);
@@ -197,7 +206,7 @@ static struct at91_cf_data cf_data;
 static struct resource at91_cf_resources[] = {
 	[0] = {
 		.start	= AT91_CF_BASE,
-		/* ties up CS4, CS5, and CS6 */
+		/* ties up CS4, CS5 and CS6 */
 		.end	= AT91_CF_BASE + (0x30000000 - 1),
 		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
 	},
@@ -231,6 +240,12 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
 		at91_set_gpio_output(data->vcc_pin, 0);
 	at91_set_gpio_output(data->rst_pin, 0);
 
+	/* force poweron defaults for these pins ... */
+	at91_set_A_periph(AT91_PIN_PC9, 0);	/* A25/CFRNW */
+	at91_set_A_periph(AT91_PIN_PC10, 0);	/* NCS4/CFCS */
+	at91_set_A_periph(AT91_PIN_PC11, 0);	/* NCS5/CFCE1 */
+	at91_set_A_periph(AT91_PIN_PC12, 0);	/* NCS6/CFCE2 */
+
 	cf_data = *data;
 	platform_device_register(&at91rm9200_cf_device);
 }
@@ -319,6 +334,7 @@ void __init at91_add_device_mmc(struct at91_mmc_data *data)
 void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
 #endif
 
+
 /* --------------------------------------------------------------------
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
@@ -399,23 +415,111 @@ void __init at91_add_device_i2c(void) {}
 #endif
 
 
+/* --------------------------------------------------------------------
+ *  SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) || defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE)
+static u64 spi_dmamask = 0xffffffffUL;
+
+static struct resource at91_spi_resources[] = {
+	[0] = {
+		.start	= AT91_BASE_SPI,
+		.end	= AT91_BASE_SPI + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91_ID_SPI,
+		.end	= AT91_ID_SPI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91rm9200_spi_device = {
+	.name		= "at91_spi",
+	.id		= 0,
+	.dev		= {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.resource	= at91_spi_resources,
+	.num_resources	= ARRAY_SIZE(at91_spi_resources),
+};
+
+static const unsigned at91_spi_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+	int i;
+	unsigned long cs_pin;
+
+	at91_set_A_periph(AT91_PIN_PA0, 0);	/* MISO */
+	at91_set_A_periph(AT91_PIN_PA1, 0);	/* MOSI */
+	at91_set_A_periph(AT91_PIN_PA2, 0);	/* SPCK */
+
+	/* Enable SPI chip-selects */
+	for (i = 0; i < nr_devices; i++) {
+		if (devices[i].controller_data)
+			cs_pin = (unsigned long) devices[i].controller_data;
+		else
+			cs_pin = at91_spi_standard_cs[devices[i].chip_select];
+
+#ifdef CONFIG_SPI_AT91_MANUAL_CS
+		at91_set_gpio_output(cs_pin, 1);
+#else
+		at91_set_A_periph(cs_pin, 0);
+#endif
+
+		/* pass chip-select pin to driver */
+		devices[i].controller_data = (void *) cs_pin;
+	}
+
+	spi_register_board_info(devices, nr_devices);
+	at91_clock_associate("spi0_clk", &at91rm9200_spi_device.dev, "spi");
+	platform_device_register(&at91rm9200_spi_device);
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
 /* --------------------------------------------------------------------
  *  RTC
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_AT91_RTC) || defined(CONFIG_AT91_RTC_MODULE)
+#if defined(CONFIG_RTC_DRV_AT91) || defined(CONFIG_RTC_DRV_AT91_MODULE)
 static struct platform_device at91rm9200_rtc_device = {
 	.name		= "at91_rtc",
 	.id		= -1,
 	.num_resources	= 0,
 };
 
-void __init at91_add_device_rtc(void)
+static void __init at91_add_device_rtc(void)
 {
 	platform_device_register(&at91rm9200_rtc_device);
 }
 #else
-void __init at91_add_device_rtc(void) {}
+static void __init at91_add_device_rtc(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  Watchdog
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91_WATCHDOG) || defined(CONFIG_AT91_WATCHDOG_MODULE)
+static struct platform_device at91rm9200_wdt_device = {
+	.name		= "at91_wdt",
+	.id		= -1,
+	.num_resources	= 0,
+};
+
+static void __init at91_add_device_watchdog(void)
+{
+	platform_device_register(&at91rm9200_wdt_device);
+}
+#else
+static void __init at91_add_device_watchdog(void) {}
 #endif
 
 
@@ -429,13 +533,281 @@ u8 at91_leds_timer;
 
 void __init at91_init_leds(u8 cpu_led, u8 timer_led)
 {
-	at91_leds_cpu   = cpu_led;
-	at91_leds_timer = timer_led;
+	at91_leds_cpu	= cpu_led;
+	at91_leds_timer	= timer_led;
 }
-
 #else
 void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
 #endif
 
 
+/* --------------------------------------------------------------------
+ *  UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_AT91)
+static struct resource dbgu_resources[] = {
+	[0] = {
+		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
+		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91_ID_SYS,
+		.end	= AT91_ID_SYS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct at91_uart_data dbgu_data = {
+	.use_dma_tx	= 0,
+	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
+};
+
+static struct platform_device at91rm9200_dbgu_device = {
+	.name		= "at91_usart",
+	.id		= 0,
+	.dev		= {
+				.platform_data	= &dbgu_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= dbgu_resources,
+	.num_resources	= ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PA30, 0);		/* DRXD */
+	at91_set_A_periph(AT91_PIN_PA31, 1);		/* DTXD */
+}
+
+static struct resource uart0_resources[] = {
+	[0] = {
+		.start	= AT91_BASE_US0,
+		.end	= AT91_BASE_US0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91_ID_US0,
+		.end	= AT91_ID_US0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct at91_uart_data uart0_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91rm9200_uart0_device = {
+	.name		= "at91_usart",
+	.id		= 1,
+	.dev		= {
+				.platform_data	= &uart0_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart0_resources,
+	.num_resources	= ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PA17, 1);		/* TXD0 */
+	at91_set_A_periph(AT91_PIN_PA18, 0);		/* RXD0 */
+	at91_set_A_periph(AT91_PIN_PA20, 0);		/* CTS0 */
+
+	/*
+	 * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21.
+	 *  We need to drive the pin manually.  Default is off (RTS is active low).
+	 */
+	at91_set_gpio_output(AT91_PIN_PA21, 1);
+}
+
+static struct resource uart1_resources[] = {
+	[0] = {
+		.start	= AT91_BASE_US1,
+		.end	= AT91_BASE_US1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91_ID_US1,
+		.end	= AT91_ID_US1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct at91_uart_data uart1_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91rm9200_uart1_device = {
+	.name		= "at91_usart",
+	.id		= 2,
+	.dev		= {
+				.platform_data	= &uart1_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart1_resources,
+	.num_resources	= ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PB18, 0);		/* RI1 */
+	at91_set_A_periph(AT91_PIN_PB19, 0);		/* DTR1 */
+	at91_set_A_periph(AT91_PIN_PB20, 1);		/* TXD1 */
+	at91_set_A_periph(AT91_PIN_PB21, 0);		/* RXD1 */
+	at91_set_A_periph(AT91_PIN_PB23, 0);		/* DCD1 */
+	at91_set_A_periph(AT91_PIN_PB24, 0);		/* CTS1 */
+	at91_set_A_periph(AT91_PIN_PB25, 0);		/* DSR1 */
+	at91_set_A_periph(AT91_PIN_PB26, 0);		/* RTS1 */
+}
+
+static struct resource uart2_resources[] = {
+	[0] = {
+		.start	= AT91_BASE_US2,
+		.end	= AT91_BASE_US2 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91_ID_US2,
+		.end	= AT91_ID_US2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct at91_uart_data uart2_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91rm9200_uart2_device = {
+	.name		= "at91_usart",
+	.id		= 3,
+	.dev		= {
+				.platform_data	= &uart2_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart2_resources,
+	.num_resources	= ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PA22, 0);		/* RXD2 */
+	at91_set_A_periph(AT91_PIN_PA23, 1);		/* TXD2 */
+}
+
+static struct resource uart3_resources[] = {
+	[0] = {
+		.start	= AT91_BASE_US3,
+		.end	= AT91_BASE_US3 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91_ID_US3,
+		.end	= AT91_ID_US3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct at91_uart_data uart3_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91rm9200_uart3_device = {
+	.name		= "at91_usart",
+	.id		= 4,
+	.dev		= {
+				.platform_data	= &uart3_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart3_resources,
+	.num_resources	= ARRAY_SIZE(uart3_resources),
+};
+
+static inline void configure_usart3_pins(void)
+{
+	at91_set_B_periph(AT91_PIN_PA5, 1);		/* TXD3 */
+	at91_set_B_periph(AT91_PIN_PA6, 0);		/* RXD3 */
+}
+
+struct platform_device *at91_uarts[AT91_NR_UART];	/* the UARTs to use */
+struct platform_device *at91_default_console_device;	/* the serial console device */
+
+void __init at91_init_serial(struct at91_uart_config *config)
+{
+	int i;
+
+	/* Fill in list of supported UARTs */
+	for (i = 0; i < config->nr_tty; i++) {
+		switch (config->tty_map[i]) {
+			case 0:
+				configure_usart0_pins();
+				at91_uarts[i] = &at91rm9200_uart0_device;
+				at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart");
+				break;
+			case 1:
+				configure_usart1_pins();
+				at91_uarts[i] = &at91rm9200_uart1_device;
+				at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart");
+				break;
+			case 2:
+				configure_usart2_pins();
+				at91_uarts[i] = &at91rm9200_uart2_device;
+				at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart");
+				break;
+			case 3:
+				configure_usart3_pins();
+				at91_uarts[i] = &at91rm9200_uart3_device;
+				at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart");
+				break;
+			case 4:
+				configure_dbgu_pins();
+				at91_uarts[i] = &at91rm9200_dbgu_device;
+				at91_clock_associate("mck", &at91rm9200_dbgu_device.dev, "usart");
+				break;
+			default:
+				continue;
+		}
+		at91_uarts[i]->id = i;		/* update ID number to mapped ID */
+	}
+
+	/* Set serial console device */
+	if (config->console_tty < AT91_NR_UART)
+		at91_default_console_device = at91_uarts[config->console_tty];
+	if (!at91_default_console_device)
+		printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
+void __init at91_add_device_serial(void)
+{
+	int i;
+
+	for (i = 0; i < AT91_NR_UART; i++) {
+		if (at91_uarts[i])
+			platform_device_register(at91_uarts[i]);
+	}
+}
+#else
+void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
 /* -------------------------------------------------------------------- */
+
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+	at91_add_device_rtc();
+	at91_add_device_watchdog();
+	return 0;
+}
+
+arch_initcall(at91_add_standard_devices);
-- 
cgit v1.2.3-18-g5258


From 466e6227e6a54d9b94b50972612fe8bf0450f786 Mon Sep 17 00:00:00 2001
From: Andrew Victor <andrew@sanpeople.com>
Date: Mon, 19 Jun 2006 17:26:23 +0100
Subject: [ARM] 3588/1: AT91RM9200 CSB337/637 board update

Patch from Andrew Victor

This patch updates the support for the Cogent CSB337 and CSB637 boards.

The changes include:
1. Use the new at91_uart_config structure and device registration
functions for the UARTs.
2. Registration of I2C and SPI platform devices.
3. The CSB337 board uses PB0 & PB1 (and not PB2) for the LEDs.  [Patch
from David Brownell]

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91rm9200/board-csb337.c | 43 +++++++++++++++++++--------------
 arch/arm/mach-at91rm9200/board-csb637.c | 30 +++++++++++------------
 2 files changed, 39 insertions(+), 34 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91rm9200/board-csb337.c b/arch/arm/mach-at91rm9200/board-csb337.c
index f45104ceea8..3b9de181ae3 100644
--- a/arch/arm/mach-at91rm9200/board-csb337.c
+++ b/arch/arm/mach-at91rm9200/board-csb337.c
@@ -24,6 +24,7 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/spi/spi.h>
 
 #include <asm/hardware.h>
 #include <asm/setup.h>
@@ -35,8 +36,8 @@
 #include <asm/mach/irq.h>
 
 #include <asm/arch/hardware.h>
-#include <asm/mach/serial_at91rm9200.h>
 #include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
 
 #include "generic.h"
 
@@ -54,32 +55,24 @@ static void __init csb337_init_irq(void)
  *    0 .. 3 = USART0 .. USART3
  *    4      = DBGU
  */
-#define CSB337_UART_MAP		{ 4, 1, -1, -1, -1 }	/* ttyS0, ..., ttyS4 */
-#define CSB337_SERIAL_CONSOLE	0			/* ttyS0 */
+static struct at91_uart_config __initdata csb337_uart_config = {
+	.console_tty	= 0,				/* ttyS0 */
+	.nr_tty		= 2,
+	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
+};
 
 static void __init csb337_map_io(void)
 {
-	int serial[AT91_NR_UART] = CSB337_UART_MAP;
-	int i;
-
 	at91rm9200_map_io();
 
 	/* Initialize clocks: 3.6864 MHz crystal */
 	at91_clock_init(3686400);
 
 	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
-
-#ifdef CONFIG_SERIAL_AT91
-	at91_console_port = CSB337_SERIAL_CONSOLE;
-	memcpy(at91_serial_map, serial, sizeof(serial));
-
-	/* Register UARTs */
-	for (i = 0; i < AT91_NR_UART; i++) {
-		if (serial[i] >= 0)
-			at91_register_uart(i, serial[i]);
-	}
-#endif
+	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
+
+	/* Setup the serial ports and console */
+	at91_init_serial(&csb337_uart_config);
 }
 
 static struct at91_eth_data __initdata csb337_eth_data = {
@@ -118,17 +111,31 @@ static struct at91_mmc_data __initdata csb337_mmc_data = {
 	.wp_pin		= AT91_PIN_PD6,
 };
 
+static struct spi_board_info csb337_spi_devices[] = {
+	{	/* CAN controller */
+		.modalias	= "sak82c900",
+		.chip_select	= 0,
+		.max_speed_hz	= 6 * 1000 * 1000,
+	},
+};
+
 static void __init csb337_board_init(void)
 {
+	/* Serial */
+	at91_add_device_serial();
 	/* Ethernet */
 	at91_add_device_eth(&csb337_eth_data);
 	/* USB Host */
 	at91_add_device_usbh(&csb337_usbh_data);
 	/* USB Device */
 	at91_add_device_udc(&csb337_udc_data);
+	/* I2C */
+	at91_add_device_i2c();
 	/* Compact Flash */
 	at91_set_gpio_input(AT91_PIN_PB22, 1);		/* IOIS16 */
 	at91_add_device_cf(&csb337_cf_data);
+	/* SPI */
+	at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
 	/* MMC */
 	at91_add_device_mmc(&csb337_mmc_data);
 }
diff --git a/arch/arm/mach-at91rm9200/board-csb637.c b/arch/arm/mach-at91rm9200/board-csb637.c
index f2c2d6e79bc..2c4470d110d 100644
--- a/arch/arm/mach-at91rm9200/board-csb637.c
+++ b/arch/arm/mach-at91rm9200/board-csb637.c
@@ -35,8 +35,8 @@
 #include <asm/mach/irq.h>
 
 #include <asm/arch/hardware.h>
-#include <asm/mach/serial_at91rm9200.h>
 #include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
 
 #include "generic.h"
 
@@ -54,14 +54,14 @@ static void __init csb637_init_irq(void)
  *    0 .. 3 = USART0 .. USART3
  *    4      = DBGU
  */
-#define CSB637_UART_MAP		{ 4, 1, -1, -1, -1 }	/* ttyS0, ..., ttyS4 */
-#define CSB637_SERIAL_CONSOLE	0			/* ttyS0 */
+static struct at91_uart_config __initdata csb637_uart_config = {
+	.console_tty	= 0,				/* ttyS0 */
+	.nr_tty		= 2,
+	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
+};
 
 static void __init csb637_map_io(void)
 {
-	int serial[AT91_NR_UART] = CSB637_UART_MAP;
-	int i;
-
 	at91rm9200_map_io();
 
 	/* Initialize clocks: 3.6864 MHz crystal */
@@ -70,16 +70,8 @@ static void __init csb637_map_io(void)
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
 
-#ifdef CONFIG_SERIAL_AT91
-	at91_console_port = CSB637_SERIAL_CONSOLE;
-	memcpy(at91_serial_map, serial, sizeof(serial));
-
-	/* Register UARTs */
-	for (i = 0; i < AT91_NR_UART; i++) {
-		if (serial[i] >= 0)
-			at91_register_uart(i, serial[i]);
-	}
-#endif
+	/* Setup the serial ports and console */
+	at91_init_serial(&csb637_uart_config);
 }
 
 static struct at91_eth_data __initdata csb637_eth_data = {
@@ -98,12 +90,18 @@ static struct at91_udc_data __initdata csb637_udc_data = {
 
 static void __init csb637_board_init(void)
 {
+	/* Serial */
+	at91_add_device_serial();
 	/* Ethernet */
 	at91_add_device_eth(&csb637_eth_data);
 	/* USB Host */
 	at91_add_device_usbh(&csb637_usbh_data);
 	/* USB Device */
 	at91_add_device_udc(&csb637_udc_data);
+	/* I2C */
+	at91_add_device_i2c();
+	/* SPI */
+	at91_add_device_spi(NULL, 0);
 }
 
 MACHINE_START(CSB637, "Cogent CSB637")
-- 
cgit v1.2.3-18-g5258


From 067bbada4cc574eaa4fa577483ecae4012049477 Mon Sep 17 00:00:00 2001
From: Andrew Victor <andrew@sanpeople.com>
Date: Mon, 19 Jun 2006 18:16:45 +0100
Subject: [ARM] 3589/1: AT91RM9200 DK/EK board update

Patch from Andrew Victor

This patch updates the support for the Atmel DK and EK boards.

The changes include:
1. Use the new at91_uart_config structure and device registration
functions for the UARTs.
2. Registration of I2C and SPI platform devices.
3. The USB Device pullup line is connected to reset, so multidrive needs
to be enabled on the line.  [Patch from David Brownell].

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91rm9200/board-dk.c | 57 ++++++++++++++++++++++++++-----------
 arch/arm/mach-at91rm9200/board-ek.c | 47 +++++++++++++++++++-----------
 2 files changed, 72 insertions(+), 32 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91rm9200/board-dk.c b/arch/arm/mach-at91rm9200/board-dk.c
index 2d7200ed66e..eb02ca95be7 100644
--- a/arch/arm/mach-at91rm9200/board-dk.c
+++ b/arch/arm/mach-at91rm9200/board-dk.c
@@ -27,6 +27,7 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/spi/spi.h>
 
 #include <asm/hardware.h>
 #include <asm/setup.h>
@@ -38,8 +39,8 @@
 #include <asm/mach/irq.h>
 
 #include <asm/arch/hardware.h>
-#include <asm/mach/serial_at91rm9200.h>
 #include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
 
 #include "generic.h"
 
@@ -57,14 +58,14 @@ static void __init dk_init_irq(void)
  *    0 .. 3 = USART0 .. USART3
  *    4      = DBGU
  */
-#define DK_UART_MAP		{ 4, 1, -1, -1, -1 }	/* ttyS0, ..., ttyS4 */
-#define DK_SERIAL_CONSOLE	0			/* ttyS0 */
+static struct at91_uart_config __initdata dk_uart_config = {
+	.console_tty	= 0,				/* ttyS0 */
+	.nr_tty		= 2,
+	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
+};
 
 static void __init dk_map_io(void)
 {
-	int serial[AT91_NR_UART] = DK_UART_MAP;
-	int i;
-
 	at91rm9200_map_io();
 
 	/* Initialize clocks: 18.432 MHz crystal */
@@ -73,16 +74,8 @@ static void __init dk_map_io(void)
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
 
-#ifdef CONFIG_SERIAL_AT91
-	at91_console_port = DK_SERIAL_CONSOLE;
-	memcpy(at91_serial_map, serial, sizeof(serial));
-
-	/* Register UARTs */
-	for (i = 0; i < AT91_NR_UART; i++) {
-		if (at91_serial_map[i] >= 0)
-			at91_register_uart(i, at91_serial_map[i]);
-	}
-#endif
+	/* Setup the serial ports and console */
+	at91_init_serial(&dk_uart_config);
 }
 
 static struct at91_eth_data __initdata dk_eth_data = {
@@ -111,16 +104,48 @@ static struct at91_mmc_data __initdata dk_mmc_data = {
 	.wire4		= 1,
 };
 
+static struct spi_board_info dk_spi_devices[] = {
+	{	/* DataFlash chip */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 15 * 1000 * 1000,
+	},
+	{	/* UR6HCPS2-SP40 PS2-to-SPI adapter */
+		.modalias	= "ur6hcps2",
+		.chip_select	= 1,
+		.max_speed_hz	= 250 *  1000,
+	},
+	{	/* TLV1504 ADC, 4 channels, 10 bits; one is a temp sensor */
+		.modalias	= "tlv1504",
+		.chip_select	= 2,
+		.max_speed_hz	= 20 * 1000 * 1000,
+	},
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
+	{	/* DataFlash card */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 3,
+		.max_speed_hz	= 15 * 1000 * 1000,
+	}
+#endif
+};
+
 static void __init dk_board_init(void)
 {
+	/* Serial */
+	at91_add_device_serial();
 	/* Ethernet */
 	at91_add_device_eth(&dk_eth_data);
 	/* USB Host */
 	at91_add_device_usbh(&dk_usbh_data);
 	/* USB Device */
 	at91_add_device_udc(&dk_udc_data);
+	at91_set_multi_drive(dk_udc_data.pullup_pin, 1);	/* pullup_pin is connected to reset */
 	/* Compact Flash */
 	at91_add_device_cf(&dk_cf_data);
+	/* I2C */
+	at91_add_device_i2c();
+	/* SPI */
+	at91_add_device_spi(dk_spi_devices, ARRAY_SIZE(dk_spi_devices));
 #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
 	/* DataFlash card */
 	at91_set_gpio_output(AT91_PIN_PB7, 0);
diff --git a/arch/arm/mach-at91rm9200/board-ek.c b/arch/arm/mach-at91rm9200/board-ek.c
index 80d90f5135a..4d7468e4267 100644
--- a/arch/arm/mach-at91rm9200/board-ek.c
+++ b/arch/arm/mach-at91rm9200/board-ek.c
@@ -27,6 +27,7 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/spi/spi.h>
 
 #include <asm/hardware.h>
 #include <asm/setup.h>
@@ -38,8 +39,8 @@
 #include <asm/mach/irq.h>
 
 #include <asm/arch/hardware.h>
-#include <asm/mach/serial_at91rm9200.h>
 #include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
 
 #include "generic.h"
 
@@ -57,14 +58,14 @@ static void __init ek_init_irq(void)
  *    0 .. 3 = USART0 .. USART3
  *    4      = DBGU
  */
-#define EK_UART_MAP		{ 4, 1, -1, -1, -1 }	/* ttyS0, ..., ttyS4 */
-#define EK_SERIAL_CONSOLE	0			/* ttyS0 */
+static struct at91_uart_config __initdata ek_uart_config = {
+	.console_tty	= 0,				/* ttyS0 */
+	.nr_tty		= 2,
+	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
+};
 
 static void __init ek_map_io(void)
 {
-	int serial[AT91_NR_UART] = EK_UART_MAP;
-	int i;
-
 	at91rm9200_map_io();
 
 	/* Initialize clocks: 18.432 MHz crystal */
@@ -73,16 +74,8 @@ static void __init ek_map_io(void)
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
 
-#ifdef CONFIG_SERIAL_AT91
-	at91_console_port = EK_SERIAL_CONSOLE;
-	memcpy(at91_serial_map, serial, sizeof(serial));
-
-	/* Register UARTs */
-	for (i = 0; i < AT91_NR_UART; i++) {
-		if (serial[i] >= 0)
-			at91_register_uart(i, serial[i]);
-	}
-#endif
+	/* Setup the serial ports and console */
+	at91_init_serial(&ek_uart_config);
 }
 
 static struct at91_eth_data __initdata ek_eth_data = {
@@ -106,14 +99,36 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
 	.wp_pin		= AT91_PIN_PA17,
 };
 
+static struct spi_board_info ek_spi_devices[] = {
+	{	/* DataFlash chip */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 15 * 1000 * 1000,
+	},
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
+	{	/* DataFlash card */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 3,
+		.max_speed_hz	= 15 * 1000 * 1000,
+	},
+#endif
+};
+
 static void __init ek_board_init(void)
 {
+	/* Serial */
+	at91_add_device_serial();
 	/* Ethernet */
 	at91_add_device_eth(&ek_eth_data);
 	/* USB Host */
 	at91_add_device_usbh(&ek_usbh_data);
 	/* USB Device */
 	at91_add_device_udc(&ek_udc_data);
+	at91_set_multi_drive(ek_udc_data.pullup_pin, 1);	/* pullup_pin is connected to reset */
+	/* I2C */
+	at91_add_device_i2c();
+	/* SPI */
+	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
 #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
 	/* DataFlash card */
 	at91_set_gpio_output(AT91_PIN_PB22, 0);
-- 
cgit v1.2.3-18-g5258


From 6902f523a328bba5af036699b1352389c0746526 Mon Sep 17 00:00:00 2001
From: Andrew Victor <andrew@sanpeople.com>
Date: Tue, 20 Jun 2006 19:30:18 +0100
Subject: [ARM] 3604/1: AT91RM9200 New boards

Patch from Andrew Victor

This patch adds support for an additional 4 AT91RM9200-based boards:

1. Conitec ARM&EVA  [MACH_CARMEVA]
   (http://www.conitec.net/english/linuxboard.htm)

2. KwikByte KB920x  [MACH_KB9200]
   (http://kwikbyte.com/KB9202_description_new.htm)

3. Embest ATEB9200  [MACH_ATEB9200]
   (http://www.embedinfo.com/english/product/ATEB9200.asp)

4. Sperry-Sun KAFA board  [MACH_KAFA]
   (unknown)

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/boot/compressed/head-at91rm9200.S |   12 +
 arch/arm/configs/ateb9200_defconfig        | 1312 ++++++++++++++++++++++++++++
 arch/arm/configs/carmeva_defconfig         |  723 +++++++++++++++
 arch/arm/configs/kafa_defconfig            |  884 +++++++++++++++++++
 arch/arm/configs/kb9202_defconfig          |  780 +++++++++++++++++
 arch/arm/mach-at91rm9200/Kconfig           |   12 +
 arch/arm/mach-at91rm9200/Makefile          |   10 +-
 arch/arm/mach-at91rm9200/board-carmeva.c   |  131 +++
 arch/arm/mach-at91rm9200/board-eb9200.c    |  130 +++
 arch/arm/mach-at91rm9200/board-kafa.c      |  116 +++
 arch/arm/mach-at91rm9200/board-kb9202.c    |  125 +++
 11 files changed, 4231 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/configs/ateb9200_defconfig
 create mode 100644 arch/arm/configs/carmeva_defconfig
 create mode 100644 arch/arm/configs/kafa_defconfig
 create mode 100644 arch/arm/configs/kb9202_defconfig
 create mode 100644 arch/arm/mach-at91rm9200/board-carmeva.c
 create mode 100644 arch/arm/mach-at91rm9200/board-eb9200.c
 create mode 100644 arch/arm/mach-at91rm9200/board-kafa.c
 create mode 100644 arch/arm/mach-at91rm9200/board-kb9202.c

(limited to 'arch/arm')

diff --git a/arch/arm/boot/compressed/head-at91rm9200.S b/arch/arm/boot/compressed/head-at91rm9200.S
index 2119ea62b54..57a3b163b2c 100644
--- a/arch/arm/boot/compressed/head-at91rm9200.S
+++ b/arch/arm/boot/compressed/head-at91rm9200.S
@@ -49,6 +49,18 @@
 		cmp	r7, r3
 		beq	99f
 
+		@ Embest ATEB9200 : 923
+		mov	r3,	#(MACH_TYPE_ATEB9200 & 0xff)
+		orr	r3, r3,	#(MACH_TYPE_ATEB9200 & 0xff00)
+		cmp	r7, r3
+		beq	99f
+
+		@ Sperry-Sun KAFA : 662
+		mov	r3,	#(MACH_TYPE_KAFA & 0xff)
+		orr	r3, r3,	#(MACH_TYPE_KAFA & 0xff00)
+		cmp	r7, r3
+		beq	99f
+
 		@ Unknown board, use the AT91RM9200DK board
 		@ mov	r7, #MACH_TYPE_AT91RM9200
 		mov	r7,	#(MACH_TYPE_AT91RM9200DK & 0xff)
diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig
new file mode 100644
index 00000000000..69c39e09874
--- /dev/null
+++ b/arch/arm/configs/ateb9200_defconfig
@@ -0,0 +1,1312 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17-rc3
+# Sun May  7 16:53:18 2006
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91RM9200=y
+
+#
+# AT91RM9200 Implementations
+#
+
+#
+# AT91RM9200 Board Type
+#
+# CONFIG_ARCH_AT91RM9200DK is not set
+# CONFIG_MACH_AT91RM9200EK is not set
+# CONFIG_MACH_CSB337 is not set
+# CONFIG_MACH_CSB637 is not set
+# CONFIG_MACH_CARMEVA is not set
+# CONFIG_MACH_KB9200 is not set
+CONFIG_MACH_ATEB9200=y
+# CONFIG_MACH_KAFA is not set
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+CONFIG_AT91_CF=m
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+CONFIG_NO_IDLE_HZ=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_IEEE80211_SOFTMAC is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLOCK is not set
+CONFIG_MTD_BLOCK_RO=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_AT91_DATAFLASH=y
+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+CONFIG_DAVICOM_PHY=y
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_ARM_AT91_ETHER=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_HOSTAP is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=m
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_AT91=y
+CONFIG_SERIAL_AT91_CONSOLE=y
+# CONFIG_SERIAL_AT91_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+CONFIG_AT91_SPI=y
+CONFIG_AT91_SPIDEV=y
+
+#
+# I2C support
+#
+CONFIG_I2C=m
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCF=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_AT91=m
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+# CONFIG_SND is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+CONFIG_HID_FF=y
+CONFIG_HID_PID=y
+CONFIG_LOGITECH_FF=y
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_USB_HIDDEV=y
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+CONFIG_USB_NET_GL620A=y
+CONFIG_USB_NET_NET1080=y
+CONFIG_USB_NET_PLUSB=y
+CONFIG_USB_NET_RNDIS_HOST=y
+CONFIG_USB_NET_CDC_SUBSET=y
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_USB_ZD1201 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ANYDATA is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+CONFIG_USB_SERIAL_CP2101=m
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+CONFIG_USB_SERIAL_FTDI_SIO=m
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not s