From 326764a85b7676388db3ebad6488f312631d7661 Mon Sep 17 00:00:00 2001 From: Jürgen Schindele Date: Thu, 29 Jun 2006 16:01:43 +0100 Subject: [ARM] 3666/1: TRIZEPS4 [1/5] core MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Patch from Jürgen Schindele This patch adds support for Trizeps4 SoM and ConXS-evalboard from "Keith und Koep" This DIMM-module is based on PXA270. Signed-off-by: Jürgen Schindele Signed-off-by: Russell King --- arch/arm/mach-pxa/trizeps4.c | 471 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 471 insertions(+) create mode 100644 arch/arm/mach-pxa/trizeps4.c (limited to 'arch/arm/mach-pxa/trizeps4.c') diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c new file mode 100644 index 00000000000..4ffff9e95ec --- /dev/null +++ b/arch/arm/mach-pxa/trizeps4.c @@ -0,0 +1,471 @@ +/* + * linux/arch/arm/mach-pxa/trizeps4.c + * + * Support for the Keith und Koep Trizeps4 Module Platform. + * + * Author: Jürgen Schindele + * Created: 20 02, 2006 + * Copyright: Jürgen Schindele + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "generic.h" + +/******************************************************************************************** + * ONBOARD FLASH + ********************************************************************************************/ +static struct mtd_partition trizeps4_partitions[] = { + { + .name = "Bootloader", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_WRITEABLE /* force read-only */ + },{ + .name = "Kernel", + .size = 0x00400000, + .offset = 0x00040000 + },{ + .name = "Filesystem", + .size = MTDPART_SIZ_FULL, + .offset = 0x00440000 + } +}; + +static struct flash_platform_data trizeps4_flash_data[] = { + { + .map_name = "cfi_probe", + .parts = trizeps4_partitions, + .nr_parts = ARRAY_SIZE(trizeps4_partitions) + } +}; + +static struct resource flash_resource = { + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_64M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device flash_device = { + .name = "pxa2xx-flash", + .id = 0, + .dev = { + .platform_data = &trizeps4_flash_data, + }, + .resource = &flash_resource, + .num_resources = 1, +}; + +/******************************************************************************************** + * DAVICOM DM9000 Ethernet + ********************************************************************************************/ +static struct resource dm9000_resources[] = { + [0] = { + .start = TRIZEPS4_ETH_PHYS+0x300, + .end = TRIZEPS4_ETH_PHYS+0x400-1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = TRIZEPS4_ETH_PHYS+0x8300, + .end = TRIZEPS4_ETH_PHYS+0x8400-1, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = TRIZEPS4_ETH_IRQ, + .end = TRIZEPS4_ETH_IRQ, + .flags = (IORESOURCE_IRQ | IRQT_RISING), + }, +}; + +static struct platform_device dm9000_device = { + .name = "dm9000", + .id = -1, + .num_resources = ARRAY_SIZE(dm9000_resources), + .resource = dm9000_resources, +}; + +/******************************************************************************************** + * PXA270 serial ports + ********************************************************************************************/ +static struct plat_serial8250_port tri_serial_ports[] = { +#ifdef CONFIG_SERIAL_PXA + /* this uses the own PXA driver */ + { + 0, + }, +#else + /* this uses the generic 8520 driver */ + [0] = { + .membase = (void *)&FFUART, + .irq = IRQ_FFUART, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM32, + .regshift = 2, + .uartclk = (921600*16), + }, + [1] = { + .membase = (void *)&BTUART, + .irq = IRQ_BTUART, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM32, + .regshift = 2, + .uartclk = (921600*16), + }, + { + 0, + }, +#endif +}; + +static struct platform_device uart_devices = { + .name = "serial8250", + .id = 0, + .dev = { + .platform_data = tri_serial_ports, + }, + .num_resources = 0, + .resource = NULL, +}; + +/******************************************************************************************** + * PXA270 ac97 sound codec + ********************************************************************************************/ +static struct platform_device ac97_audio_device = { + .name = "pxa2xx-ac97", + .id = -1, +}; + +static struct platform_device * trizeps4_devices[] __initdata = { + &flash_device, + &uart_devices, + &dm9000_device, + &ac97_audio_device, +}; + +#ifdef CONFIG_MACH_TRIZEPS4_CONXS +static short trizeps_conxs_bcr; + +/* PCCARD power switching supports only 3,3V */ +void board_pcmcia_power(int power) +{ + if (power) { + /* switch power on, put in reset and enable buffers */ + trizeps_conxs_bcr |= power; + trizeps_conxs_bcr |= ConXS_BCR_CF_RESET; + trizeps_conxs_bcr &= ~(ConXS_BCR_CF_BUF_EN); + ConXS_BCR = trizeps_conxs_bcr; + /* wait a little */ + udelay(2000); + /* take reset away */ + trizeps_conxs_bcr &= ~(ConXS_BCR_CF_RESET); + ConXS_BCR = trizeps_conxs_bcr; + udelay(2000); + } else { + /* put in reset */ + trizeps_conxs_bcr |= ConXS_BCR_CF_RESET; + ConXS_BCR = trizeps_conxs_bcr; + udelay(1000); + /* switch power off */ + trizeps_conxs_bcr &= ~(0xf); + ConXS_BCR = trizeps_conxs_bcr; + + } + pr_debug("%s: o%s 0x%x\n", __FUNCTION__, power ? "n": "ff", trizeps_conxs_bcr); +} + +/* backlight power switching for LCD panel */ +static void board_backlight_power(int on) +{ + if (on) { + trizeps_conxs_bcr |= ConXS_BCR_L_DISP; + } else { + trizeps_conxs_bcr &= ~ConXS_BCR_L_DISP; + } + pr_debug("%s: o%s 0x%x\n", __FUNCTION__, on ? "n" : "ff", trizeps_conxs_bcr); + ConXS_BCR = trizeps_conxs_bcr; +} + +/* Powersupply for MMC/SD cardslot */ +static void board_mci_power(struct device *dev, unsigned int vdd) +{ + struct pxamci_platform_data* p_d = dev->platform_data; + + if (( 1 << vdd) & p_d->ocr_mask) { + pr_debug("%s: on\n", __FUNCTION__); + /* FIXME fill in values here */ + } else { + pr_debug("%s: off\n", __FUNCTION__); + /* FIXME fill in values here */ + } +} + +static short trizeps_conxs_ircr; + +/* Switch modes and Power for IRDA receiver */ +static void board_irda_mode(struct device *dev, int mode) +{ + unsigned long flags; + + local_irq_save(flags); + if (mode & IR_SIRMODE) { + /* Slow mode */ + trizeps_conxs_ircr &= ~ConXS_IRCR_MODE; + } else if (mode & IR_FIRMODE) { + /* Fast mode */ + trizeps_conxs_ircr |= ConXS_IRCR_MODE; + } + if (mode & IR_OFF) { + trizeps_conxs_ircr |= ConXS_IRCR_SD; + } else { + trizeps_conxs_ircr &= ~ConXS_IRCR_SD; + } + /* FIXME write values to register */ + local_irq_restore(flags); +} + +#else +/* for other baseboards define dummies */ +void board_pcmcia_power(int power) {;} +#define board_backlight_power NULL +#define board_mci_power NULL +#define board_irda_mode NULL + +#endif /* CONFIG_MACH_TRIZEPS4_CONXS */ +EXPORT_SYMBOL(board_pcmcia_power); + +static int trizeps4_mci_init(struct device *dev, irqreturn_t (*mci_detect_int)(int, void *, struct pt_regs *), void *data) +{ + int err; + /* setup GPIO for PXA27x MMC controller */ + pxa_gpio_mode(GPIO32_MMCCLK_MD); + pxa_gpio_mode(GPIO112_MMCCMD_MD); + pxa_gpio_mode(GPIO92_MMCDAT0_MD); + pxa_gpio_mode(GPIO109_MMCDAT1_MD); + pxa_gpio_mode(GPIO110_MMCDAT2_MD); + pxa_gpio_mode(GPIO111_MMCDAT3_MD); + + pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN); + + err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int, SA_INTERRUPT | SA_TRIGGER_RISING, "MMC card detect", data); + if (err) { + printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); + return -1; + } + return 0; +} + +static void trizeps4_mci_exit(struct device *dev, void *data) +{ + free_irq(TRIZEPS4_MMC_IRQ, data); +} + +static struct pxamci_platform_data trizeps4_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .init = trizeps4_mci_init, + .exit = trizeps4_mci_exit, + .setpower = board_mci_power, +}; + +static struct pxaficp_platform_data trizeps4_ficp_platform_data = { + .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF, + .transceiver_mode = board_irda_mode, +}; + +static int trizeps4_ohci_init(struct device *dev) +{ + /* setup Port1 GPIO pin. */ + pxa_gpio_mode( 88 | GPIO_ALT_FN_1_IN); /* USBHPWR1 */ + pxa_gpio_mode( 89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */ + + /* Set the Power Control Polarity Low and Power Sense + Polarity Low to active low. */ + UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) & + ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE); + + return 0; +} + +static void trizeps4_ohci_exit(struct device *dev) +{ + ; +} + +static struct pxaohci_platform_data trizeps4_ohci_platform_data = { + .port_mode = PMM_PERPORT_MODE, + .init = trizeps4_ohci_init, + .exit = trizeps4_ohci_exit, +}; + +static struct map_desc trizeps4_io_desc[] __initdata = { + { /* ConXS CFSR */ + .virtual = TRIZEPS4_CFSR_VIRT, + .pfn = __phys_to_pfn(TRIZEPS4_CFSR_PHYS), + .length = 0x00001000, + .type = MT_DEVICE + }, + { /* ConXS BCR */ + .virtual = TRIZEPS4_BOCR_VIRT, + .pfn = __phys_to_pfn(TRIZEPS4_BOCR_PHYS), + .length = 0x00001000, + .type = MT_DEVICE + }, + { /* ConXS IRCR */ + .virtual = TRIZEPS4_IRCR_VIRT, + .pfn = __phys_to_pfn(TRIZEPS4_IRCR_PHYS), + .length = 0x00001000, + .type = MT_DEVICE + }, + { /* ConXS DCR */ + .virtual = TRIZEPS4_DICR_VIRT, + .pfn = __phys_to_pfn(TRIZEPS4_DICR_PHYS), + .length = 0x00001000, + .type = MT_DEVICE + }, + { /* ConXS UPSR */ + .virtual = TRIZEPS4_UPSR_VIRT, + .pfn = __phys_to_pfn(TRIZEPS4_UPSR_PHYS), + .length = 0x00001000, + .type = MT_DEVICE + } +}; + +static struct pxafb_mach_info sharp_lcd __initdata = { + .pixclock = 78000, + .xres = 640, + .yres = 480, + .bpp = 8, + .hsync_len = 4, + .left_margin = 4, + .right_margin = 4, + .vsync_len = 2, + .upper_margin = 0, + .lower_margin = 0, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .cmap_greyscale = 0, + .cmap_inverse = 0, + .cmap_static = 0, + .lccr0 = LCCR0_Color | LCCR0_Pas | LCCR0_Dual, + .lccr3 = 0x0340ff02, + .pxafb_backlight_power = board_backlight_power, +}; + +static void __init trizeps4_fixup(struct machine_desc *desc, struct tag *tags, char **cmdline, struct meminfo *mi) +{ +} + +static void __init trizeps4_init(void) +{ + platform_add_devices(trizeps4_devices, ARRAY_SIZE(trizeps4_devices)); + + set_pxa_fb_info(&sharp_lcd); + + pxa_set_mci_info(&trizeps4_mci_platform_data); + pxa_set_ficp_info(&trizeps4_ficp_platform_data); + pxa_set_ohci_info(&trizeps4_ohci_platform_data); +} + +static void __init trizeps4_map_io(void) +{ + pxa_map_io(); + iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc)); + + /* for DiskOnChip */ + pxa_gpio_mode(GPIO15_nCS_1_MD); + + /* for off-module PIC on ConXS board */ + pxa_gpio_mode(GPIO_PIC | GPIO_IN); + + /* UCB1400 irq */ + pxa_gpio_mode(GPIO_UCB1400 | GPIO_IN); + + /* for DM9000 LAN */ + pxa_gpio_mode(GPIO78_nCS_2_MD); + pxa_gpio_mode(GPIO_DM9000 | GPIO_IN); + + /* for PCMCIA device */ + pxa_gpio_mode(GPIO_PCD | GPIO_IN); + pxa_gpio_mode(GPIO_PRDY | GPIO_IN); + + /* for I2C adapter */ + pxa_gpio_mode(GPIO117_I2CSCL_MD); + pxa_gpio_mode(GPIO118_I2CSDA_MD); + + /* MMC_DET s.o. */ + pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN); + + /* whats that for ??? */ + pxa_gpio_mode(GPIO79_nCS_3_MD); + + pxa_gpio_mode( GPIO_SYS_BUSY_LED | GPIO_OUT); /* LED1 */ + pxa_gpio_mode( GPIO_HEARTBEAT_LED | GPIO_OUT); /* LED2 */ + +#ifdef CONFIG_MACH_TRIZEPS4_CONXS +#ifdef CONFIG_IDE_PXA_CF + /* if boot direct from compact flash dont disable power */ + trizeps_conxs_bcr = 0x0009; +#else + /* this is the reset value */ + trizeps_conxs_bcr = 0x00A0; +#endif + ConXS_BCR = trizeps_conxs_bcr; +#endif + + PWER = 0x00000002; + PFER = 0x00000000; + PRER = 0x00000002; + PGSR0 = 0x0158C000; + PGSR1 = 0x00FF0080; + PGSR2 = 0x0001C004; + /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */ + PCFR |= PCFR_OPDE; +} + +MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module") + /* MAINTAINER("Jürgen Schindele") */ + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = TRIZEPS4_SDRAM_BASE + 0x100, + .fixup = trizeps4_fixup, + .init_machine = trizeps4_init, + .map_io = trizeps4_map_io, + .init_irq = pxa_init_irq, + .timer = &pxa_timer, +MACHINE_END + -- cgit v1.2.3-18-g5258