From 386c5cf7a9a1d6856f17bde43174f751fac1bc0b Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Thu, 10 Dec 2009 10:34:04 +0100 Subject: imx/mx2: rename files defining a machine to mach-$mach.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Uwe Kleine-König Cc: Sascha Hauer Cc: Russell King Cc: Eric Benard --- arch/arm/mach-mx2/pcm038.c | 338 --------------------------------------------- 1 file changed, 338 deletions(-) delete mode 100644 arch/arm/mach-mx2/pcm038.c (limited to 'arch/arm/mach-mx2/pcm038.c') diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c deleted file mode 100644 index a2e2ea16c13..00000000000 --- a/arch/arm/mach-mx2/pcm038.c +++ /dev/null @@ -1,338 +0,0 @@ -/* - * Copyright 2007 Robert Schwebel , Pengutronix - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -#include "devices.h" - -static int pcm038_pins[] = { - /* UART1 */ - PE12_PF_UART1_TXD, - PE13_PF_UART1_RXD, - PE14_PF_UART1_CTS, - PE15_PF_UART1_RTS, - /* UART2 */ - PE3_PF_UART2_CTS, - PE4_PF_UART2_RTS, - PE6_PF_UART2_TXD, - PE7_PF_UART2_RXD, - /* UART3 */ - PE8_PF_UART3_TXD, - PE9_PF_UART3_RXD, - PE10_PF_UART3_CTS, - PE11_PF_UART3_RTS, - /* FEC */ - PD0_AIN_FEC_TXD0, - PD1_AIN_FEC_TXD1, - PD2_AIN_FEC_TXD2, - PD3_AIN_FEC_TXD3, - PD4_AOUT_FEC_RX_ER, - PD5_AOUT_FEC_RXD1, - PD6_AOUT_FEC_RXD2, - PD7_AOUT_FEC_RXD3, - PD8_AF_FEC_MDIO, - PD9_AIN_FEC_MDC, - PD10_AOUT_FEC_CRS, - PD11_AOUT_FEC_TX_CLK, - PD12_AOUT_FEC_RXD0, - PD13_AOUT_FEC_RX_DV, - PD14_AOUT_FEC_RX_CLK, - PD15_AOUT_FEC_COL, - PD16_AIN_FEC_TX_ER, - PF23_AIN_FEC_TX_EN, - /* I2C2 */ - PC5_PF_I2C2_SDA, - PC6_PF_I2C2_SCL, - /* SPI1 */ - PD25_PF_CSPI1_RDY, - PD29_PF_CSPI1_SCLK, - PD30_PF_CSPI1_MISO, - PD31_PF_CSPI1_MOSI, - /* SSI1 */ - PC20_PF_SSI1_FS, - PC21_PF_SSI1_RXD, - PC22_PF_SSI1_TXD, - PC23_PF_SSI1_CLK, - /* SSI4 */ - PC16_PF_SSI4_FS, - PC17_PF_SSI4_RXD, - PC18_PF_SSI4_TXD, - PC19_PF_SSI4_CLK, -}; - -/* - * Phytec's PCM038 comes with 2MiB battery buffered SRAM, - * 16 bit width - */ - -static struct platdata_mtd_ram pcm038_sram_data = { - .bankwidth = 2, -}; - -static struct resource pcm038_sram_resource = { - .start = MX27_CS1_BASE_ADDR, - .end = MX27_CS1_BASE_ADDR + 512 * 1024 - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device pcm038_sram_mtd_device = { - .name = "mtd-ram", - .id = 0, - .dev = { - .platform_data = &pcm038_sram_data, - }, - .num_resources = 1, - .resource = &pcm038_sram_resource, -}; - -/* - * Phytec's phyCORE-i.MX27 comes with 32MiB flash, - * 16 bit width - */ -static struct physmap_flash_data pcm038_flash_data = { - .width = 2, -}; - -static struct resource pcm038_flash_resource = { - .start = 0xc0000000, - .end = 0xc1ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device pcm038_nor_mtd_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &pcm038_flash_data, - }, - .num_resources = 1, - .resource = &pcm038_flash_resource, -}; - -static struct imxuart_platform_data uart_pdata[] = { - { - .flags = IMXUART_HAVE_RTSCTS, - }, { - .flags = IMXUART_HAVE_RTSCTS, - }, { - .flags = IMXUART_HAVE_RTSCTS, - }, -}; - -static struct mxc_nand_platform_data pcm038_nand_board_info = { - .width = 1, - .hw_ecc = 1, -}; - -static struct platform_device *platform_devices[] __initdata = { - &pcm038_nor_mtd_device, - &mxc_w1_master_device, - &mxc_fec_device, - &pcm038_sram_mtd_device, -}; - -/* On pcm038 there's a sram attached to CS1, we enable the chipselect here and - * setup other stuffs to access the sram. */ -static void __init pcm038_init_sram(void) -{ - __raw_writel(0x0000d843, CSCR_U(1)); - __raw_writel(0x22252521, CSCR_L(1)); - __raw_writel(0x22220a00, CSCR_A(1)); -} - -static struct imxi2c_platform_data pcm038_i2c_1_data = { - .bitrate = 100000, -}; - -static struct at24_platform_data board_eeprom = { - .byte_len = 4096, - .page_size = 32, - .flags = AT24_FLAG_ADDR16, -}; - -static struct i2c_board_info pcm038_i2c_devices[] = { - { - I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */ - .platform_data = &board_eeprom, - }, { - I2C_BOARD_INFO("pcf8563", 0x51), - }, { - I2C_BOARD_INFO("lm75", 0x4a), - } -}; - -static int pcm038_spi_cs[] = {GPIO_PORTD + 28}; - -static struct spi_imx_master pcm038_spi_0_data = { - .chipselect = pcm038_spi_cs, - .num_chipselect = ARRAY_SIZE(pcm038_spi_cs), -}; - -static struct regulator_consumer_supply sdhc1_consumers[] = { - { - .dev = &mxc_sdhc_device1.dev, - .supply = "sdhc_vcc", - }, -}; - -static struct regulator_init_data sdhc1_data = { - .constraints = { - .min_uV = 3000000, - .max_uV = 3400000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_FAST, - .always_on = 0, - .boot_on = 0, - }, - .num_consumer_supplies = ARRAY_SIZE(sdhc1_consumers), - .consumer_supplies = sdhc1_consumers, -}; - -static struct regulator_consumer_supply cam_consumers[] = { - { - .dev = NULL, - .supply = "imx_cam_vcc", - }, -}; - -static struct regulator_init_data cam_data = { - .constraints = { - .min_uV = 3000000, - .max_uV = 3400000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_FAST, - .always_on = 0, - .boot_on = 0, - }, - .num_consumer_supplies = ARRAY_SIZE(cam_consumers), - .consumer_supplies = cam_consumers, -}; - -struct mc13783_regulator_init_data pcm038_regulators[] = { - { - .id = MC13783_REGU_VCAM, - .init_data = &cam_data, - }, { - .id = MC13783_REGU_VMMC1, - .init_data = &sdhc1_data, - }, -}; - -static struct mc13783_platform_data pcm038_pmic = { - .regulators = pcm038_regulators, - .num_regulators = ARRAY_SIZE(pcm038_regulators), - .flags = MC13783_USE_ADC | MC13783_USE_REGULATOR | - MC13783_USE_TOUCHSCREEN, -}; - -static struct spi_board_info pcm038_spi_board_info[] __initdata = { - { - .modalias = "mc13783", - .irq = IRQ_GPIOB(23), - .max_speed_hz = 300000, - .bus_num = 0, - .chip_select = 0, - .platform_data = &pcm038_pmic, - .mode = SPI_CS_HIGH, - } -}; - -static void __init pcm038_init(void) -{ - mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins), - "PCM038"); - - pcm038_init_sram(); - - mxc_register_device(&mxc_uart_device0, &uart_pdata[0]); - mxc_register_device(&mxc_uart_device1, &uart_pdata[1]); - mxc_register_device(&mxc_uart_device2, &uart_pdata[2]); - - mxc_gpio_mode(PE16_AF_OWIRE); - mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info); - - /* only the i2c master 1 is used on this CPU card */ - i2c_register_board_info(1, pcm038_i2c_devices, - ARRAY_SIZE(pcm038_i2c_devices)); - - mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data); - - /* PE18 for user-LED D40 */ - mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT); - - mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT); - - /* MC13783 IRQ */ - mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN); - - mxc_register_device(&mxc_spi_device0, &pcm038_spi_0_data); - spi_register_board_info(pcm038_spi_board_info, - ARRAY_SIZE(pcm038_spi_board_info)); - - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - -#ifdef CONFIG_MACH_PCM970_BASEBOARD - pcm970_baseboard_init(); -#endif -} - -static void __init pcm038_timer_init(void) -{ - mx27_clocks_init(26000000); -} - -static struct sys_timer pcm038_timer = { - .init = pcm038_timer_init, -}; - -MACHINE_START(PCM038, "phyCORE-i.MX27") - .phys_io = MX27_AIPI_BASE_ADDR, - .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, - .map_io = mx27_map_io, - .init_irq = mx27_init_irq, - .init_machine = pcm038_init, - .timer = &pcm038_timer, -MACHINE_END -- cgit v1.2.3-18-g5258