From e119bfff1f102f8d1505910cd6c09df55c776b43 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 10 Jan 2010 17:23:29 +0000 Subject: ARM: Move creation of /proc/cpu out of alignment.c Always creating this directory avoids other users having to jump through silly hoops when they want to share this directory. Signed-off-by: Russell King --- arch/arm/Kconfig | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm/Kconfig') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c2238cd474c..b224216c11d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -52,6 +52,9 @@ config HAVE_TCM bool select GENERIC_ALLOCATOR +config HAVE_PROC_CPU + bool + config NO_IOPORT bool @@ -1229,6 +1232,7 @@ config ALIGNMENT_TRAP bool depends on CPU_CP15_MMU default y if !ARCH_EBSA110 + select HAVE_PROC_CPU if PROC_FS help ARM processors cannot fetch/store information which is not naturally aligned on the bus, i.e., a 4 byte fetch must start at an -- cgit v1.2.3-18-g5258 From 24b44a66fa240f6fc63343623ca730d39754047e Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 20 Jan 2010 19:05:07 +0100 Subject: ARM: 5889/1: Add atomic64 routines for ARMv6k and above. In preparation for perf-events support, ARM needs to support atomic64_t operations. v6k and above support the ldrexd and strexd instructions to do just that. This patch adds atomic64 support to the ARM architecture. v6k and above make use of new instructions whilst older cores fall back on the generic solution using spinlocks. If and when v7-M cores are supported by Linux, they will need to fall back on the spinlock implementation too. Signed-off-by: Will Deacon Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/Kconfig') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index b224216c11d..762ae536f90 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -12,6 +12,7 @@ config ARM select HAVE_IDE select RTC_LIB select SYS_SUPPORTS_APM_EMULATION + select GENERIC_ATOMIC64 if (!CPU_32v6K) select HAVE_OPROFILE select HAVE_ARCH_KGDB select HAVE_KPROBES if (!XIP_KERNEL) -- cgit v1.2.3-18-g5258 From 9e65582a8e8715f883a34eea66e0643778ce878d Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Thu, 4 Feb 2010 19:42:42 +0100 Subject: ARM: 5919/1: ARM: L2 : Errata 588369: Clean & Invalidate do not invalidate clean lines This patch implements the work-around for the errata 588369.The secure API is used to alter L2 debug register because of trust-zone. This version updated with comments from Russell and Catalin and generated against 2.6.33-rc6 mainline kernel. Detail comments can be found: http://www.spinics.net/lists/linux-omap/msg23431.html Signed-off-by: Woodruff Richard Signed-off-by: Santosh Shilimkar Acked-by: Catalin Marinas Acked-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/Kconfig | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch/arm/Kconfig') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 762ae536f90..0f1ad743ccd 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -924,6 +924,19 @@ config ARM_ERRATA_460075 ACTLR register. Note that setting specific bits in the ACTLR register may not be available in non-secure mode. +config PL310_ERRATA_588369 + bool "Clean & Invalidate maintenance operations do not invalidate clean lines" + depends on CACHE_L2X0 && ARCH_OMAP4 + help + The PL310 L2 cache controller implements three types of Clean & + Invalidate maintenance operations: by Physical Address + (offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC). + They are architecturally defined to behave as the execution of a + clean operation followed immediately by an invalidate operation, + both performing to the same memory location. This functionality + is not correctly implemented in PL310 as clean lines are not + invalidated as a result of these operations. Note that this errata + uses Texas Instrument's secure monitor api. endmenu source "arch/arm/common/Kconfig" -- cgit v1.2.3-18-g5258 From d6d502fa4be1acd01971476fc732c95a4da16d90 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Mon, 22 Feb 2010 00:02:59 +0100 Subject: ARM: 5952/1: ARM: MM: Add ARM_L1_CACHE_SHIFT_6 for handle inside each ARCH Kconfig Add ARM_L1_CACHE_SHIFT_6 to arch/arm/Kconfig to allow CPUs with L1 cache lines which are 64bytes to indicate this without having to alter the arch/arm/mm/Kconfig entry each time. Update the mm Kconfig so that ARM_L1_CACHE_SHIFT default value uses this and change OMAP3 and S5PC1XX to select ARM_L1_CACHE_SHIFT_6. Acked-by: Ben Dooks Acked-by: Tony Lindgren Signed-off-by: Kukjin Kim Signed-off-by: Russell King --- arch/arm/Kconfig | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm/Kconfig') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 0f1ad743ccd..04247ba31d6 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -165,6 +165,11 @@ config ARCH_MTD_XIP config GENERIC_HARDIRQS_NO__DO_IRQ def_bool y +config ARM_L1_CACHE_SHIFT_6 + bool + help + Setting ARM L1 cache line size to 64 Bytes. + if OPROFILE config OPROFILE_ARMV6 @@ -642,6 +647,7 @@ config ARCH_S5PC1XX select GENERIC_GPIO select HAVE_CLK select CPU_V7 + select ARM_L1_CACHE_SHIFT_6 help Samsung S5PC1XX series based systems -- cgit v1.2.3-18-g5258