From b8a99520f78e23e47f9efffeb0060c1385064ff6 Mon Sep 17 00:00:00 2001 From: Jamal Hadi Salim Date: Fri, 14 Apr 2006 15:05:16 -0700 Subject: [XFRM]: Add documentation for async events. Documentation to describe asynchronous xfrm events to help people writting HA code in user space. Signed-off-by: Jamal Hadi Salim Signed-off-by: David S. Miller --- Documentation/networking/xfrm_sync.txt | 166 +++++++++++++++++++++++++++++++++ 1 file changed, 166 insertions(+) create mode 100644 Documentation/networking/xfrm_sync.txt (limited to 'Documentation') diff --git a/Documentation/networking/xfrm_sync.txt b/Documentation/networking/xfrm_sync.txt new file mode 100644 index 00000000000..8be626f7c0b --- /dev/null +++ b/Documentation/networking/xfrm_sync.txt @@ -0,0 +1,166 @@ + +The sync patches work is based on initial patches from +Krisztian and others and additional patches +from Jamal . + +The end goal for syncing is to be able to insert attributes + generate +events so that the an SA can be safely moved from one machine to another +for HA purposes. +The idea is to synchronize the SA so that the takeover machine can do +the processing of the SA as accurate as possible if it has access to it. + +We already have the ability to generate SA add/del/upd events. +These patches add ability to sync and have accurate lifetime byte (to +ensure proper decay of SAs) and replay counters to avoid replay attacks +with as minimal loss at failover time. +This way a backup stays as closely uptodate as an active member. + +Because the above items change for every packet the SA receives, +it is possible for a lot of the events to be generated. +For this reason, we also add a nagle-like algorithm to restrict +the events. i.e we are going to set thresholds to say "let me +know if the replay sequence threshold is reached or 10 secs have passed" +These thresholds are set system-wide via sysctls or can be updated +per SA. + +The identified items that need to be synchronized are: +- the lifetime byte counter +note that: lifetime time limit is not important if you assume the failover +machine is known ahead of time since the decay of the time countdown +is not driven by packet arrival. +- the replay sequence for both inbound and outbound + +1) Message Structure +---------------------- + +nlmsghdr:aevent_id:optional-TLVs. + +The netlink message types are: + +XFRM_MSG_NEWAE and XFRM_MSG_GETAE. + +A XFRM_MSG_GETAE does not have TLVs. +A XFRM_MSG_NEWAE will have at least two TLVs (as is +discussed further below). + +aevent_id structure looks like: + + struct xfrm_aevent_id { + struct xfrm_usersa_id sa_id; + __u32 flags; + }; + +xfrm_usersa_id in this message layout identifies the SA. + +flags are used to indicate different things. The possible +flags are: + XFRM_AE_RTHR=1, /* replay threshold*/ + XFRM_AE_RVAL=2, /* replay value */ + XFRM_AE_LVAL=4, /* lifetime value */ + XFRM_AE_ETHR=8, /* expiry timer threshold */ + XFRM_AE_CR=16, /* Event cause is replay update */ + XFRM_AE_CE=32, /* Event cause is timer expiry */ + XFRM_AE_CU=64, /* Event cause is policy update */ + +How these flags are used is dependent on the direction of the +message (kernel<->user) as well the cause (config, query or event). +This is described below in the different messages. + +The pid will be set appropriately in netlink to recognize direction +(0 to the kernel and pid = processid that created the event +when going from kernel to user space) + +A program needs to subscribe to multicast group XFRMNLGRP_AEVENTS +to get notified of these events. + +2) TLVS reflect the different parameters: +----------------------------------------- + +a) byte value (XFRMA_LTIME_VAL) +This TLV carries the running/current counter for byte lifetime since +last event. + +b)replay value (XFRMA_REPLAY_VAL) +This TLV carries the running/current counter for replay sequence since +last event. + +c)replay threshold (XFRMA_REPLAY_THRESH) +This TLV carries the threshold being used by the kernel to trigger events +when the replay sequence is exceeded. + +d) expiry timer (XFRMA_ETIMER_THRESH) +This is a timer value in milliseconds which is used as the nagle +value to rate limit the events. + +3) Default configurations for the parameters: +---------------------------------------------- + +By default these events should be turned off unless there is +at least one listener registered to listen to the multicast +group XFRMNLGRP_AEVENTS. + +Programs installing SAs will need to specify the two thresholds, however, +in order to not change existing applications such as racoon +we also provide default threshold values for these different parameters +in case they are not specified. + +the two sysctls/proc entries are: +a) /proc/sys/net/core/sysctl_xfrm_aevent_etime +used to provide default values for the XFRMA_ETIMER_THRESH in incremental +units of time of 100ms. The default is 10 (1 second) + +b) /proc/sys/net/core/sysctl_xfrm_aevent_rseqth +used to provide default values for XFRMA_REPLAY_THRESH parameter +in incremental packet count. The default is two packets. + +4) Message types +---------------- + +a) XFRM_MSG_GETAE issued by user-->kernel. +XFRM_MSG_GETAE does not carry any TLVs. +The response is a XFRM_MSG_NEWAE which is formatted based on what +XFRM_MSG_GETAE queried for. +The response will always have XFRMA_LTIME_VAL and XFRMA_REPLAY_VAL TLVs. +*if XFRM_AE_RTHR flag is set, then XFRMA_REPLAY_THRESH is also retrieved +*if XFRM_AE_ETHR flag is set, then XFRMA_ETIMER_THRESH is also retrieved + +b) XFRM_MSG_NEWAE is issued by either user space to configure +or kernel to announce events or respond to a XFRM_MSG_GETAE. + +i) user --> kernel to configure a specific SA. +any of the values or threshold parameters can be updated by passing the +appropriate TLV. +A response is issued back to the sender in user space to indicate success +or failure. +In the case of success, additionally an event with +XFRM_MSG_NEWAE is also issued to any listeners as described in iii). + +ii) kernel->user direction as a response to XFRM_MSG_GETAE +The response will always have XFRMA_LTIME_VAL and XFRMA_REPLAY_VAL TLVs. +The threshold TLVs will be included if explicitly requested in +the XFRM_MSG_GETAE message. + +iii) kernel->user to report as event if someone sets any values or +thresholds for an SA using XFRM_MSG_NEWAE (as described in #i above). +In such a case XFRM_AE_CU flag is set to inform the user that +the change happened as a result of an update. +The message will always have XFRMA_LTIME_VAL and XFRMA_REPLAY_VAL TLVs. + +iv) kernel->user to report event when replay threshold or a timeout +is exceeded. +In such a case either XFRM_AE_CR (replay exceeded) or XFRM_AE_CE (timeout +happened) is set to inform the user what happened. +Note the two flags are mutually exclusive. +The message will always have XFRMA_LTIME_VAL and XFRMA_REPLAY_VAL TLVs. + +Exceptions to threshold settings +-------------------------------- + +If you have an SA that is getting hit by traffic in bursts such that +there is a period where the timer threshold expires with no packets +seen, then an odd behavior is seen as follows: +The first packet arrival after a timer expiry will trigger a timeout +aevent; i.e we dont wait for a timeout period or a packet threshold +to be reached. This is done for simplicity and efficiency reasons. + +-JHS -- cgit v1.2.3-18-g5258