From f48372465ffdff62a6d75a6f34bc850855fb6470 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Wed, 25 Sep 2013 14:58:19 +0800 Subject: mtd: add MTD_MLCNANDFLASH case for mtd_type_show() The current mtd_type_show() misses the MTD_MLCNANDFLASH case. This patch adds the case for it, and also updates the ABI. Signed-off-by: Huang Shijie Signed-off-by: Brian Norris --- Documentation/ABI/testing/sysfs-class-mtd | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-class-mtd b/Documentation/ABI/testing/sysfs-class-mtd index bfd119ace6a..1399bb2da3e 100644 --- a/Documentation/ABI/testing/sysfs-class-mtd +++ b/Documentation/ABI/testing/sysfs-class-mtd @@ -104,7 +104,7 @@ Description: One of the following ASCII strings, representing the device type: - absent, ram, rom, nor, nand, dataflash, ubi, unknown + absent, ram, rom, nor, nand, mlc-nand, dataflash, ubi, unknown What: /sys/class/mtd/mtdX/writesize Date: April 2009 -- cgit v1.2.3-18-g5258 From ac65caf514ec3e55e8d3d510ee37f80dd97418fe Mon Sep 17 00:00:00 2001 From: Pekon Gupta Date: Thu, 24 Oct 2013 18:20:17 +0530 Subject: ARM: OMAP2+: cleaned-up DT support of various ECC schemes OMAP NAND driver support multiple ECC scheme, which can used in different flavours, depending on in-build Hardware engines present on SoC. This patch updates following in DT bindings related to sectionion of ecc-schemes - ti,elm-id: replaces elm_id (maintains backward compatibility) - ti,nand-ecc-opts: selection of h/w or s/w implementation of an ecc-scheme depends on ti,elm-id. (supported values ham1, bch4, and bch8) - maintain backward compatibility to deprecated DT bindings (sw, hw, hw-romcode) Below table shows different flavours of ecc-schemes supported by OMAP devices +---------------------------------------+---------------+---------------+ | ECC scheme |ECC calculation|Error detection| +---------------------------------------+---------------+---------------+ |OMAP_ECC_HAM1_CODE_HW |H/W (GPMC) |S/W | +---------------------------------------+---------------+---------------+ |OMAP_ECC_BCH8_CODE_HW_DETECTION_SW |H/W (GPMC) |S/W | |(requires CONFIG_MTD_NAND_ECC_BCH) | | | +---------------------------------------+---------------+---------------+ |OMAP_ECC_BCH8_CODE_HW |H/W (GPMC) |H/W (ELM) | |(requires CONFIG_MTD_NAND_OMAP_BCH && | | | | ti,elm-id in DT) | | | +---------------------------------------+---------------+---------------+ To optimize footprint of omap2-nand driver, selection of some ECC schemes also require enabling following Kconfigs, in addition to setting appropriate DT bindings - Kconfig:CONFIG_MTD_NAND_ECC_BCH error detection done in software - Kconfig:CONFIG_MTD_NAND_OMAP_BCH error detection done by h/w engine Signed-off-by: Pekon Gupta Reviewed-by: Felipe Balbi Acked-by: Tony Lindgren Tested-by: Ezequiel Garcia Signed-off-by: Brian Norris --- Documentation/devicetree/bindings/mtd/gpmc-nand.txt | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt index df338cb5059..bfe07e15273 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt @@ -36,8 +36,12 @@ Optional properties: "prefetch-dma" Prefetch enabled sDMA mode "prefetch-irq" Prefetch enabled irq mode - - elm_id: Specifies elm device node. This is required to support BCH - error correction using ELM module. + - elm_id: use "ti,elm-id" instead + - ti,elm-id: Specifies phandle of the ELM devicetree node. + ELM is an on-chip hardware engine on TI SoC which is used for + locating ECC errors for BCHx algorithms. SoC devices which have + ELM hardware engines should specify this device node in .dtsi + Using ELM for ECC error correction frees some CPU cycles. For inline partiton table parsing (optional): -- cgit v1.2.3-18-g5258 From c66d039197e42af8867e5d0d9b904daf0fb9e6bc Mon Sep 17 00:00:00 2001 From: Pekon Gupta Date: Thu, 24 Oct 2013 18:20:18 +0530 Subject: mtd: nand: omap: combine different flavours of 1-bit hamming ecc schemes OMAP NAND driver currently supports multiple flavours of 1-bit Hamming ecc-scheme, like: - OMAP_ECC_HAMMING_CODE_DEFAULT 1-bit hamming ecc code using software library - OMAP_ECC_HAMMING_CODE_HW 1-bit hamming ecc-code using GPMC h/w engine - OMAP_ECC_HAMMING_CODE_HW_ROMCODE 1-bit hamming ecc-code using GPMC h/w engin with ecc-layout compatible to ROM code. This patch combines above multiple ecc-schemes into single implementation: - OMAP_ECC_HAM1_CODE_HW 1-bit hamming ecc-code using GPMC h/w engine with ROM-code compatible ecc-layout. Signed-off-by: Pekon Gupta Reviewed-by: Felipe Balbi Acked-by: Tony Lindgren Tested-by: Ezequiel Garcia Signed-off-by: Brian Norris --- Documentation/devicetree/bindings/mtd/gpmc-nand.txt | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt index bfe07e15273..5e1f31b5ff7 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt @@ -22,10 +22,10 @@ Optional properties: width of 8 is assumed. - ti,nand-ecc-opt: A string setting the ECC layout to use. One of: - - "sw" Software method (default) - "hw" Hardware method - "hw-romcode" gpmc hamming mode method & romcode layout + "sw" use "ham1" instead + "hw" use "ham1" instead + "hw-romcode" use "ham1" instead + "ham1" 1-bit Hamming ecc code "bch4" 4-bit BCH ecc code "bch8" 8-bit BCH ecc code -- cgit v1.2.3-18-g5258 From 5961ad2cb4dd14933889f5219e0d8505669d752d Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Wed, 30 Oct 2013 00:41:30 -0400 Subject: mtd: nand_bbt: kill NAND_BBT_SCANALLPAGES Now that the last user of NAND_BBT_SCANALLPAGES has been removed, let's kill this peculiar BBT feature flag. Signed-off-by: Brian Norris Reviewed-by: Ezequiel Garcia Signed-off-by: Artem Bityutskiy --- Documentation/DocBook/mtdnand.tmpl | 2 -- 1 file changed, 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl index a248f42a121..cd11926e07c 100644 --- a/Documentation/DocBook/mtdnand.tmpl +++ b/Documentation/DocBook/mtdnand.tmpl @@ -1222,8 +1222,6 @@ in this page #define NAND_BBT_VERSION 0x00000100 /* Create a bbt if none axists */ #define NAND_BBT_CREATE 0x00000200 -/* Search good / bad pattern through all pages of a block */ -#define NAND_BBT_SCANALLPAGES 0x00000400 /* Write bbt if neccecary */ #define NAND_BBT_WRITE 0x00001000 /* Read and write back block contents when writing bbt */ -- cgit v1.2.3-18-g5258