From 0283fe6c3bdbe9ca9aefa28b24883ec1dee3ccbd Mon Sep 17 00:00:00 2001 From: "bgardner@wabtec.com" Date: Wed, 27 Jul 2005 12:43:21 -0500 Subject: [PATCH] I2C: max6875 documentation cleanup Fix a spelling error and change a sysfs name. Signed-off-by: Ben Gardner Signed-off-by: Greg Kroah-Hartman --- Documentation/i2c/chips/max6875 | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation/i2c') diff --git a/Documentation/i2c/chips/max6875 b/Documentation/i2c/chips/max6875 index 46b8dc34c97..96fec562a8e 100644 --- a/Documentation/i2c/chips/max6875 +++ b/Documentation/i2c/chips/max6875 @@ -49,14 +49,14 @@ $ modprobe max6875 force=0,0x50 The MAX6874/MAX6875 ignores address bit 0, so this driver attaches to multiple addresses. For example, for address 0x50, it also reserves 0x51. -The even-address instance is called 'max6875', the odd one is 'max6875-dummy'. +The even-address instance is called 'max6875', the odd one is 'max6875 subclient'. Programming the chip using i2c-dev ---------------------------------- Use the i2c-dev interface to access and program the chips. -Reads and write are performed differently depending on the address range. +Reads and writes are performed differently depending on the address range. The configuration registers are at addresses 0x00 - 0x45. Use i2c_smbus_write_byte_data() to write a register and -- cgit v1.2.3-18-g5258