From a3793a0d86e2d65dda6beb86fa295be25b238159 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 22 Feb 2011 09:57:44 +0000 Subject: sh: switch ap325rxa to dynamically manage the platform camera Use soc_camera_platform helper functions to dynamically manage the camera device. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt --- arch/sh/boards/mach-ap325rxa/setup.c | 32 +++++++++++++------------------- 1 file changed, 13 insertions(+), 19 deletions(-) diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c index 618bd566cf5..969421f64a1 100644 --- a/arch/sh/boards/mach-ap325rxa/setup.c +++ b/arch/sh/boards/mach-ap325rxa/setup.c @@ -359,37 +359,31 @@ static struct soc_camera_link camera_link = { .priv = &camera_info, }; -static void dummy_release(struct device *dev) +static struct platform_device *camera_device; + +static void ap325rxa_camera_release(struct device *dev) { + soc_camera_platform_release(&camera_device); } -static struct platform_device camera_device = { - .name = "soc_camera_platform", - .dev = { - .platform_data = &camera_info, - .release = dummy_release, - }, -}; - static int ap325rxa_camera_add(struct soc_camera_link *icl, struct device *dev) { - if (icl != &camera_link || camera_probe() <= 0) - return -ENODEV; + int ret = soc_camera_platform_add(icl, dev, &camera_device, &camera_link, + ap325rxa_camera_release, 0); + if (ret < 0) + return ret; - camera_info.dev = dev; + ret = camera_probe(); + if (ret < 0) + soc_camera_platform_del(icl, camera_device, &camera_link); - return platform_device_register(&camera_device); + return ret; } static void ap325rxa_camera_del(struct soc_camera_link *icl) { - if (icl != &camera_link) - return; - - platform_device_unregister(&camera_device); - memset(&camera_device.dev.kobj, 0, - sizeof(camera_device.dev.kobj)); + soc_camera_platform_del(icl, camera_device, &camera_link); } #endif /* CONFIG_I2C */ -- cgit v1.2.3-18-g5258 From 52b96c2592e8fdb93231c9644b68112518916a57 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 15 Apr 2011 18:30:55 +0000 Subject: sh: add MMCIF runtime PM support on ecovec Signed-off-by: Guennadi Liakhovetski Cc: Simon Horman Cc: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/mach-ecovec24/setup.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index bb13d0e1b96..3a32741cc0a 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -885,6 +885,9 @@ static struct platform_device sh_mmcif_device = { }, .num_resources = ARRAY_SIZE(sh_mmcif_resources), .resource = sh_mmcif_resources, + .archdata = { + .hwblk_id = HWBLK_MMC, + }, }; #endif -- cgit v1.2.3-18-g5258 From 0f0ebd980e0e8a2fd33ab3ef0d5b0cffbcddd8a1 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 24 May 2011 17:25:23 +0900 Subject: sh: arch/sh/kernel/process_32.c needs linux/prefetch.h. Trivial build fix for certain configurations that don't grab linux/prefetch.h via alternate means (specifically SH-2 and SH-3 parts). Signed-off-by: Paul Mundt --- arch/sh/kernel/process_32.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c index 762a13984bb..b473f0c06fb 100644 --- a/arch/sh/kernel/process_32.c +++ b/arch/sh/kernel/process_32.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3-18-g5258 From 4e2b1084b0fb79c963b73586815e1ef034dc2b57 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 24 May 2011 17:33:51 +0900 Subject: sh: Update shmin to reflect PIO dependency. shmin uses __set_io_port_base() for legacy I/O mapping that ethernet and other SuperI/O functions depend on. Ensure that PIO support is built in until the board is updated for MMIO properly. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index b44e37753b9..a164c9e3c73 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -167,7 +167,7 @@ config ARCH_HAS_CPU_IDLE_WAIT config NO_IOPORT def_bool !PCI - depends on !SH_CAYMAN && !SH_SH4202_MICRODEV + depends on !SH_CAYMAN && !SH_SH4202_MICRODEV && !SH_SHMIN config IO_TRAPPED bool -- cgit v1.2.3-18-g5258 From b779260b097dec295e8798277ed08ec5ecd3b2c1 Mon Sep 17 00:00:00 2001 From: Joseph Cihula Date: Tue, 3 May 2011 00:08:37 -0700 Subject: intel-iommu: fix VT-d PMR disable for TXT on S3 resume This patch is a follow on to https://lkml.org/lkml/2011/3/21/239, which was merged as commit 51a63e67da6056c13b5b597dcc9e1b3bd7ceaa55. This patch adds support for S3, as pointed out by Chris Wright. Signed-off-by: Joseph Cihula Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 31 +++++++++++++++++++++++++------ 1 file changed, 25 insertions(+), 6 deletions(-) diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index d552d2c7784..4e4e0202e59 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -141,6 +141,12 @@ static struct intel_iommu **g_iommus; static void __init check_tylersburg_isoch(void); static int rwbf_quirk; +/* + * set to 1 to panic kernel if can't successfully enable VT-d + * (used when kernel is launched w/ TXT) + */ +static int force_on = 0; + /* * 0: Present * 1-11: Reserved @@ -2217,7 +2223,7 @@ static int __init iommu_prepare_static_identity_mapping(int hw) return 0; } -static int __init init_dmars(int force_on) +static int __init init_dmars(void) { struct dmar_drhd_unit *drhd; struct dmar_rmrr_unit *rmrr; @@ -3117,7 +3123,17 @@ static int init_iommu_hw(void) if (iommu->qi) dmar_reenable_qi(iommu); - for_each_active_iommu(iommu, drhd) { + for_each_iommu(iommu, drhd) { + if (drhd->ignored) { + /* + * we always have to disable PMRs or DMA may fail on + * this device + */ + if (force_on) + iommu_disable_protect_mem_regions(iommu); + continue; + } + iommu_flush_write_buffer(iommu); iommu_set_root_entry(iommu); @@ -3126,7 +3142,8 @@ static int init_iommu_hw(void) DMA_CCMD_GLOBAL_INVL); iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_GLOBAL_FLUSH); - iommu_enable_translation(iommu); + if (iommu_enable_translation(iommu)) + return 1; iommu_disable_protect_mem_regions(iommu); } @@ -3193,7 +3210,10 @@ static void iommu_resume(void) unsigned long flag; if (init_iommu_hw()) { - WARN(1, "IOMMU setup failed, DMAR can not resume!\n"); + if (force_on) + panic("tboot: IOMMU setup failed, DMAR can not resume!\n"); + else + WARN(1, "IOMMU setup failed, DMAR can not resume!\n"); return; } @@ -3270,7 +3290,6 @@ static struct notifier_block device_nb = { int __init intel_iommu_init(void) { int ret = 0; - int force_on = 0; /* VT-d is required for a TXT/tboot launch, so enforce that */ force_on = tboot_force_iommu(); @@ -3308,7 +3327,7 @@ int __init intel_iommu_init(void) init_no_remapping_devices(); - ret = init_dmars(force_on); + ret = init_dmars(); if (ret) { if (force_on) panic("tboot: Failed to initialize DMARs\n"); -- cgit v1.2.3-18-g5258 From b3a530e4e734cab7043a3ab7d135f539042443a7 Mon Sep 17 00:00:00 2001 From: Jan Kiszka Date: Sun, 15 May 2011 12:34:55 +0200 Subject: intel-iommu: Remove obsolete comment from detect_intel_iommu Since cacd4213d8, this comment no longer applies. Signed-off-by: Jan Kiszka Signed-off-by: David Woodhouse --- drivers/pci/dmar.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c index 12e02bf92c4..3dc9befa5ae 100644 --- a/drivers/pci/dmar.c +++ b/drivers/pci/dmar.c @@ -698,12 +698,7 @@ int __init detect_intel_iommu(void) { #ifdef CONFIG_INTR_REMAP struct acpi_table_dmar *dmar; - /* - * for now we will disable dma-remapping when interrupt - * remapping is enabled. - * When support for queued invalidation for IOTLB invalidation - * is added, we will not need this any more. - */ + dmar = (struct acpi_table_dmar *) dmar_tbl; if (ret && cpu_has_x2apic && dmar->flags & 0x1) printk(KERN_INFO -- cgit v1.2.3-18-g5258 From 7b668357810ecb5fdda4418689d50f5d95aea6a8 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Tue, 24 May 2011 12:02:41 +0100 Subject: intel-iommu: Flush unmaps at domain_exit We typically batch unmaps to be lazily flushed out at regular intervals. When we destroy a domain, we need to force a flush of these lazy unmaps to be sure none reference the domain we're about to free. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=35062 Signed-off-by: Alex Williamson Signed-off-by: David Woodhouse Cc: stable@kernel.org --- drivers/pci/intel-iommu.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 4e4e0202e59..395f253c049 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -1422,6 +1422,10 @@ static void domain_exit(struct dmar_domain *domain) if (!domain) return; + /* Flush any lazy unmaps that may reference this domain */ + if (!intel_iommu_strict) + flush_unmaps_timeout(0); + domain_remove_dev_info(domain); /* destroy iovas */ put_iova_domain(&domain->iovad); -- cgit v1.2.3-18-g5258 From 1c7fcbed1adee44708dafb65ac40b186c203d7e8 Mon Sep 17 00:00:00 2001 From: Damian Date: Tue, 24 May 2011 07:01:22 +0000 Subject: sh_mobile_meram: MERAM platform data for LCDC Based on the patch by Takanari Hayama Add the necessary platform data to add MERAM functionality to LCDC Includes platform data for both the AP4EVB and mackerel Signed-off-by: Damian Hobson-Garcia Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-ap4evb.c | 56 +++++++++++++++++++++++++++++++ arch/arm/mach-shmobile/board-mackerel.c | 58 +++++++++++++++++++++++++++++++++ 2 files changed, 114 insertions(+) diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 1e35fa976d6..c9aad5eefcc 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -249,6 +249,29 @@ static int slot_cn7_get_cd(struct platform_device *pdev) { return !gpio_get_value(GPIO_PORT41); } +/* MERAM */ +static struct sh_mobile_meram_info meram_info = { + .addr_mode = SH_MOBILE_MERAM_MODE1, +}; + +static struct resource meram_resources[] = { + [0] = { + .name = "MERAM", + .start = 0xe8000000, + .end = 0xe81fffff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device meram_device = { + .name = "sh_mobile_meram", + .id = 0, + .num_resources = ARRAY_SIZE(meram_resources), + .resource = meram_resources, + .dev = { + .platform_data = &meram_info, + }, +}; /* SH_MMCIF */ static struct resource sh_mmcif_resources[] = { @@ -431,13 +454,29 @@ const static struct fb_videomode ap4evb_lcdc_modes[] = { #endif }, }; +static struct sh_mobile_meram_cfg lcd_meram_cfg = { + .icb[0] = { + .marker_icb = 28, + .cache_icb = 24, + .meram_offset = 0x0, + .meram_size = 0x40, + }, + .icb[1] = { + .marker_icb = 29, + .cache_icb = 25, + .meram_offset = 0x40, + .meram_size = 0x40, + }, +}; static struct sh_mobile_lcdc_info lcdc_info = { + .meram_dev = &meram_info, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, .bpp = 16, .lcd_cfg = ap4evb_lcdc_modes, .num_cfg = ARRAY_SIZE(ap4evb_lcdc_modes), + .meram_cfg = &lcd_meram_cfg, } }; @@ -708,15 +747,31 @@ static struct platform_device fsi_device = { static struct platform_device fsi_ak4643_device = { .name = "sh_fsi2_a_ak4643", }; +static struct sh_mobile_meram_cfg hdmi_meram_cfg = { + .icb[0] = { + .marker_icb = 30, + .cache_icb = 26, + .meram_offset = 0x80, + .meram_size = 0x100, + }, + .icb[1] = { + .marker_icb = 31, + .cache_icb = 27, + .meram_offset = 0x180, + .meram_size = 0x100, + }, +}; static struct sh_mobile_lcdc_info sh_mobile_lcdc1_info = { .clock_source = LCDC_CLK_EXTERNAL, + .meram_dev = &meram_info, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, .bpp = 16, .interface_type = RGB24, .clock_divider = 1, .flags = LCDC_FLAGS_DWPOL, + .meram_cfg = &hdmi_meram_cfg, } }; @@ -945,6 +1000,7 @@ static struct platform_device *ap4evb_devices[] __initdata = { &csi2_device, &ceu_device, &ap4evb_camera, + &meram_device, }; static void __init hdmi_init_pm_clock(void) diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 7da2ca24229..a165a9e70ee 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -279,6 +279,30 @@ static struct platform_device smc911x_device = { }, }; +/* MERAM */ +static struct sh_mobile_meram_info mackerel_meram_info = { + .addr_mode = SH_MOBILE_MERAM_MODE1, +}; + +static struct resource meram_resources[] = { + [0] = { + .name = "MERAM", + .start = 0xe8000000, + .end = 0xe81fffff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device meram_device = { + .name = "sh_mobile_meram", + .id = 0, + .num_resources = ARRAY_SIZE(meram_resources), + .resource = meram_resources, + .dev = { + .platform_data = &mackerel_meram_info, + }, +}; + /* LCDC */ static struct fb_videomode mackerel_lcdc_modes[] = { { @@ -307,7 +331,23 @@ static int mackerel_get_brightness(void *board_data) return gpio_get_value(GPIO_PORT31); } +static struct sh_mobile_meram_cfg lcd_meram_cfg = { + .icb[0] = { + .marker_icb = 28, + .cache_icb = 24, + .meram_offset = 0x0, + .meram_size = 0x40, + }, + .icb[1] = { + .marker_icb = 29, + .cache_icb = 25, + .meram_offset = 0x40, + .meram_size = 0x40, + }, +}; + static struct sh_mobile_lcdc_info lcdc_info = { + .meram_dev = &mackerel_meram_info, .clock_source = LCDC_CLK_BUS, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, @@ -327,6 +367,7 @@ static struct sh_mobile_lcdc_info lcdc_info = { .name = "sh_mobile_lcdc_bl", .max_brightness = 1, }, + .meram_cfg = &lcd_meram_cfg, } }; @@ -353,8 +394,23 @@ static struct platform_device lcdc_device = { }, }; +static struct sh_mobile_meram_cfg hdmi_meram_cfg = { + .icb[0] = { + .marker_icb = 30, + .cache_icb = 26, + .meram_offset = 0x80, + .meram_size = 0x100, + }, + .icb[1] = { + .marker_icb = 31, + .cache_icb = 27, + .meram_offset = 0x180, + .meram_size = 0x100, + }, +}; /* HDMI */ static struct sh_mobile_lcdc_info hdmi_lcdc_info = { + .meram_dev = &mackerel_meram_info, .clock_source = LCDC_CLK_EXTERNAL, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, @@ -362,6 +418,7 @@ static struct sh_mobile_lcdc_info hdmi_lcdc_info = { .interface_type = RGB24, .clock_divider = 1, .flags = LCDC_FLAGS_DWPOL, + .meram_cfg = &hdmi_meram_cfg, } }; @@ -949,6 +1006,7 @@ static struct platform_device *mackerel_devices[] __initdata = { &mackerel_camera, &hdmi_lcdc_device, &hdmi_device, + &meram_device, }; /* Keypad Initialization */ -- cgit v1.2.3-18-g5258 From 54525552c6ccfd867e819845da14be994e303218 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 24 May 2011 10:23:59 +0000 Subject: sh: mark DMA slave ID 0 as invalid This makes it possible to leave DMA slave IDs in the platform data at default 0 value without hitting DMA channel allocation error paths. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt --- arch/sh/include/cpu-sh4/cpu/sh7722.h | 1 + arch/sh/include/cpu-sh4/cpu/sh7724.h | 1 + arch/sh/include/cpu-sh4/cpu/sh7757.h | 1 + 3 files changed, 3 insertions(+) diff --git a/arch/sh/include/cpu-sh4/cpu/sh7722.h b/arch/sh/include/cpu-sh4/cpu/sh7722.h index 7a5b8a331b4..bd0622788d6 100644 --- a/arch/sh/include/cpu-sh4/cpu/sh7722.h +++ b/arch/sh/include/cpu-sh4/cpu/sh7722.h @@ -236,6 +236,7 @@ enum { }; enum { + SHDMA_SLAVE_INVALID, SHDMA_SLAVE_SCIF0_TX, SHDMA_SLAVE_SCIF0_RX, SHDMA_SLAVE_SCIF1_TX, diff --git a/arch/sh/include/cpu-sh4/cpu/sh7724.h b/arch/sh/include/cpu-sh4/cpu/sh7724.h index 7eb43599942..3daef8ecbc6 100644 --- a/arch/sh/include/cpu-sh4/cpu/sh7724.h +++ b/arch/sh/include/cpu-sh4/cpu/sh7724.h @@ -285,6 +285,7 @@ enum { }; enum { + SHDMA_SLAVE_INVALID, SHDMA_SLAVE_SCIF0_TX, SHDMA_SLAVE_SCIF0_RX, SHDMA_SLAVE_SCIF1_TX, diff --git a/arch/sh/include/cpu-sh4/cpu/sh7757.h b/arch/sh/include/cpu-sh4/cpu/sh7757.h index 05b8196c775..41f9f8b9db7 100644 --- a/arch/sh/include/cpu-sh4/cpu/sh7757.h +++ b/arch/sh/include/cpu-sh4/cpu/sh7757.h @@ -252,6 +252,7 @@ enum { }; enum { + SHDMA_SLAVE_INVALID, SHDMA_SLAVE_SDHI_TX, SHDMA_SLAVE_SDHI_RX, SHDMA_SLAVE_MMCIF_TX, -- cgit v1.2.3-18-g5258 From 4bff4a7ee4b9e487a1bc1d31082e77b6a381418a Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 11 May 2011 16:51:20 +0000 Subject: ARM: arch-shmobile: support SDHI card detection on mackerel, using a GPIO On sh7372 the card-detection pin of SDHI0 can also produce interrupts, when configured as GPIO. Use this feature to power down SDHI0, when no card is plugged in. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-mackerel.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index d4fe74067d6..776f20560e7 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -39,6 +39,7 @@ #include #include #include +#include #include #include #include @@ -913,6 +914,17 @@ static int slot_cn7_get_cd(struct platform_device *pdev) } /* SDHI0 */ +static irqreturn_t mackerel_sdhi0_gpio_cd(int irq, void *arg) +{ + struct device *dev = arg; + struct sh_mobile_sdhi_info *info = dev->platform_data; + struct tmio_mmc_data *pdata = info->pdata; + + tmio_mmc_cd_wakeup(pdata); + + return IRQ_HANDLED; +} + static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, @@ -1296,6 +1308,7 @@ static void __init mackerel_init(void) { u32 srcr4; struct clk *clk; + int ret; sh7372_pinmux_init(); @@ -1401,6 +1414,13 @@ static void __init mackerel_init(void) gpio_request(GPIO_FN_SDHID0_1, NULL); gpio_request(GPIO_FN_SDHID0_0, NULL); + ret = request_irq(evt2irq(0x3340), mackerel_sdhi0_gpio_cd, + IRQF_TRIGGER_FALLING, "sdhi0 cd", &sdhi0_device.dev); + if (!ret) + sdhi0_info.tmio_flags |= TMIO_MMC_HAS_COLD_CD; + else + pr_err("Cannot get IRQ #%d: %d\n", evt2irq(0x3340), ret); + #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) /* enable SDHI1 */ gpio_request(GPIO_FN_SDHICMD1, NULL); -- cgit v1.2.3-18-g5258 From 6df87e65dbe4528ef07b917af89913abb8caaaba Mon Sep 17 00:00:00 2001 From: Andreas Gruenbacher Date: Sat, 28 May 2011 14:44:46 +0200 Subject: block: improve the bio_add_page() and bio_add_pc_page() descriptions The descriptions of bio_add_page() and bio_add_pc_page() are slightly inconsistent; improve them. Signed-off-by: Andreas Gruenbacher Cc: Jens Axboe Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- fs/bio.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/fs/bio.c b/fs/bio.c index 840a0d75524..9bfade8a609 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -638,10 +638,11 @@ static int __bio_add_page(struct request_queue *q, struct bio *bio, struct page * @offset: vec entry offset * * Attempt to add a page to the bio_vec maplist. This can fail for a - * number of reasons, such as the bio being full or target block - * device limitations. The target block device must allow bio's - * smaller than PAGE_SIZE, so it is always possible to add a single - * page to an empty bio. This should only be used by REQ_PC bios. + * number of reasons, such as the bio being full or target block device + * limitations. The target block device must allow bio's up to PAGE_SIZE, + * so it is always possible to add a single page to an empty bio. + * + * This should only be used by REQ_PC bios. */ int bio_add_pc_page(struct request_queue *q, struct bio *bio, struct page *page, unsigned int len, unsigned int offset) @@ -659,10 +660,9 @@ EXPORT_SYMBOL(bio_add_pc_page); * @offset: vec entry offset * * Attempt to add a page to the bio_vec maplist. This can fail for a - * number of reasons, such as the bio being full or target block - * device limitations. The target block device must allow bio's - * smaller than PAGE_SIZE, so it is always possible to add a single - * page to an empty bio. + * number of reasons, such as the bio being full or target block device + * limitations. The target block device must allow bio's up to PAGE_SIZE, + * so it is always possible to add a single page to an empty bio. */ int bio_add_page(struct bio *bio, struct page *page, unsigned int len, unsigned int offset) -- cgit v1.2.3-18-g5258 From 35fbf5bcf497d6ddbe7b6478141e7526d1474ff5 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Sat, 28 May 2011 14:44:46 +0200 Subject: nbd: pass MSG_* flags to kernel_recvmsg() Unlike kernel_sendmsg(), kernel_recvmsg() requires passing flags explicitly via last parameter instead of struct msghdr.msg_flags. Therefore calls to sock_xmit(lo, 0, ..., MSG_WAITALL) have not been processed properly by tcp layer wrt. the flag. Fix it. Signed-off-by: Namhyung Kim Cc: Paul Clements Signed-off-by: Jens Axboe --- drivers/block/nbd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index e6fc716aca4..1df3bfe5225 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -192,7 +192,8 @@ static int sock_xmit(struct nbd_device *lo, int send, void *buf, int size, if (lo->xmit_timeout) del_timer_sync(&ti); } else - result = kernel_recvmsg(sock, &msg, &iov, 1, size, 0); + result = kernel_recvmsg(sock, &msg, &iov, 1, size, + msg.msg_flags); if (signal_pending(current)) { siginfo_t info; -- cgit v1.2.3-18-g5258 From 3b2710824e00d238554c13b5add347e6c701ab1a Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Sat, 28 May 2011 14:44:46 +0200 Subject: nbd: limit module parameters to a sane value The 'max_part' parameter controls the number of maximum partition a nbd device can have. However if a user specifies very large value it would exceed the limitation of device minor number and can cause a kernel oops (or, at least, produce invalid device nodes in some cases). In addition, specifying large 'nbds_max' value causes same problem for the same reason. On my desktop, following command results to the kernel bug: $ sudo modprobe nbd max_part=100000 kernel BUG at /media/Linux_Data/project/linux/fs/sysfs/group.c:65! invalid opcode: 0000 [#1] SMP last sysfs file: /sys/devices/virtual/block/nbd4/range CPU 1 Modules linked in: nbd(+) bridge stp llc kvm_intel kvm asus_atk0110 sg sr_mod cdrom Pid: 2522, comm: modprobe Tainted: G W 2.6.39-leonard+ #159 System manufacturer System Product Name/P5G41TD-M PRO RIP: 0010:[] [] internal_create_group+0x2f/0x166 RSP: 0018:ffff8801009f1de8 EFLAGS: 00010246 RAX: 00000000ffffffef RBX: ffff880103920478 RCX: 00000000000a7bd3 RDX: ffffffff81a2dbe0 RSI: 0000000000000000 RDI: ffff880103920478 RBP: ffff8801009f1e38 R08: ffff880103920468 R09: ffff880103920478 R10: ffff8801009f1de8 R11: ffff88011eccbb68 R12: ffffffff81a2dbe0 R13: ffff880103920468 R14: 0000000000000000 R15: ffff880103920400 FS: 00007f3c49de9700(0000) GS:ffff88011f800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f3b7fe7c000 CR3: 00000000cd58d000 CR4: 00000000000406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 2522, threadinfo ffff8801009f0000, task ffff8801009a93a0) Stack: ffff8801009f1e58 ffffffff812e8f6e ffff8801009f1e58 ffffffff812e7a80 ffff880000000010 ffff880103920400 ffff8801002fd0c0 ffff880103920468 0000000000000011 ffff880103920400 ffff8801009f1e48 ffffffff8115ab6a Call Trace: [] ? device_add+0x4f1/0x5e4 [] ? dev_set_name+0x41/0x43 [] sysfs_create_group+0x13/0x15 [] blk_trace_init_sysfs+0x14/0x16 [] blk_register_queue+0x4c/0xfd [] add_disk+0xe4/0x29c [] nbd_init+0x2ab/0x30d [nbd] [] ? 0xffffffffa007dfff [] do_one_initcall+0x7f/0x13e [] sys_init_module+0xa1/0x1e3 [] system_call_fastpath+0x16/0x1b Code: 41 57 41 56 41 55 41 54 53 48 83 ec 28 0f 1f 44 00 00 48 89 fb 41 89 f6 49 89 d4 48 85 ff 74 0b 85 f6 75 0b 48 83 7f 30 00 75 14 <0f> 0b eb fe b9 ea ff ff ff 48 83 7f 30 00 0f 84 09 01 00 00 49 RIP [] internal_create_group+0x2f/0x166 RSP ---[ end trace 753285ffbf72c57c ]--- Signed-off-by: Namhyung Kim Cc: Laurent Vivier Cc: Paul Clements Cc: stable@kernel.org Signed-off-by: Jens Axboe --- drivers/block/nbd.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 1df3bfe5225..fdee7567fd1 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -757,6 +757,12 @@ static int __init nbd_init(void) if (max_part > 0) part_shift = fls(max_part); + if ((1UL << part_shift) > DISK_MAX_PARTS) + return -EINVAL; + + if (nbds_max > 1UL << (MINORBITS - part_shift)) + return -EINVAL; + for (i = 0; i < nbds_max; i++) { struct gendisk *disk = alloc_disk(1 << part_shift); if (!disk) -- cgit v1.2.3-18-g5258 From 5988ce239682854d4e632fb58bff000700830394 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Sat, 28 May 2011 14:44:46 +0200 Subject: nbd: adjust 'max_part' according to part_shift The 'max_part' parameter determines how many partitions are supported on each nbd device. However the actual number can be changed to the power of 2 minus 1 form during the module initialization as alloc_disk() is called with (1 << part_shift) for some reason. So adjust 'max_part' also at least for consistency with loop and brd. It is exported via sysfs already, and a user should check this value after module loading if [s]he wants to use that number correctly (i.e. fdisk or something). Signed-off-by: Namhyung Kim Cc: Laurent Vivier Cc: Paul Clements Signed-off-by: Jens Axboe --- drivers/block/nbd.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index fdee7567fd1..f533f3375e2 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -754,9 +754,20 @@ static int __init nbd_init(void) return -ENOMEM; part_shift = 0; - if (max_part > 0) + if (max_part > 0) { part_shift = fls(max_part); + /* + * Adjust max_part according to part_shift as it is exported + * to user space so that user can know the max number of + * partition kernel should be able to manage. + * + * Note that -1 is required because partition 0 is reserved + * for the whole disk. + */ + max_part = (1UL << part_shift) - 1; + } + if ((1UL << part_shift) > DISK_MAX_PARTS) return -EINVAL; -- cgit v1.2.3-18-g5258 From a1706ac4c0201ea0143dc0db0659001b26ceeabb Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Mon, 30 May 2011 07:42:51 +0200 Subject: Revert "block: Remove extra discard_alignment from hd_struct." It was not a good idea to start dereferencing disk->queue from the fs sysfs strategy for displaying discard alignment. We ran into first a NULL pointer deref, and after fixing that we sometimes see unvalid disk->queue pointer values. Since discard is the only one of the bunch actually looking into the queue, just revert the change. This reverts commit 23ceb5b7719e9276d4fa72a3ecf94dd396755276. Conflicts: fs/partitions/check.c --- fs/partitions/check.c | 10 +++------- include/linux/genhd.h | 1 + 2 files changed, 4 insertions(+), 7 deletions(-) diff --git a/fs/partitions/check.c b/fs/partitions/check.c index f82e762eeca..d545e97d99c 100644 --- a/fs/partitions/check.c +++ b/fs/partitions/check.c @@ -255,13 +255,7 @@ ssize_t part_discard_alignment_show(struct device *dev, struct device_attribute *attr, char *buf) { struct hd_struct *p = dev_to_part(dev); - struct gendisk *disk = dev_to_disk(dev); - unsigned int alignment = 0; - - if (disk->queue) - alignment = queue_limit_discard_alignment(&disk->queue->limits, - p->start_sect); - return sprintf(buf, "%u\n", alignment); + return sprintf(buf, "%u\n", p->discard_alignment); } ssize_t part_stat_show(struct device *dev, @@ -455,6 +449,8 @@ struct hd_struct *add_partition(struct gendisk *disk, int partno, p->start_sect = start; p->alignment_offset = queue_limit_alignment_offset(&disk->queue->limits, start); + p->discard_alignment = + queue_limit_discard_alignment(&disk->queue->limits, start); p->nr_sects = len; p->partno = partno; p->policy = get_disk_ro(disk); diff --git a/include/linux/genhd.h b/include/linux/genhd.h index b78956b3c2e..300d7582006 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -100,6 +100,7 @@ struct hd_struct { sector_t start_sect; sector_t nr_sects; sector_t alignment_offset; + unsigned int discard_alignment; struct device __dev; struct kobject *holder_dir; int policy, partno; -- cgit v1.2.3-18-g5258 From 194cd8dfc9e4f29249b3bd45c5cb5c0a33a6438c Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Tue, 31 May 2011 13:27:41 +0900 Subject: sh: asm/tlb.h needs linux/swap.h Commit 1e56a56410bb64bce62d44563e35a143fc2d515f introduced the mmu_gather rework for sh, but missed a linux/swap.h include: CC arch/sh/mm/tlb-urb.o In file included from arch/sh/mm/tlb-urb.c:14:0: arch/sh/include/asm/tlb.h: In function '__tlb_remove_page': arch/sh/include/asm/tlb.h:92:2: error: implicit declaration of function 'free_page_and_swap_cache' Signed-off-by: Nobuhiro Iwamatsu CC: Peter Zijlstra Signed-off-by: Paul Mundt --- arch/sh/include/asm/tlb.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/sh/include/asm/tlb.h b/arch/sh/include/asm/tlb.h index 6c308d8b9a5..ec88bfcdf7c 100644 --- a/arch/sh/include/asm/tlb.h +++ b/arch/sh/include/asm/tlb.h @@ -9,6 +9,7 @@ #include #ifdef CONFIG_MMU +#include #include #include #include -- cgit v1.2.3-18-g5258 From 65d517eb7224d24ee4206416161390f30d69e622 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 31 May 2011 14:37:44 +0900 Subject: sh64: asm/pgtable.h needs asm/mmu.h Needed to satisfy the __in_29bit_mode() check. Signed-off-by: Paul Mundt --- arch/sh/include/asm/pgtable.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h index db85916b9e9..9210e93a92c 100644 --- a/arch/sh/include/asm/pgtable.h +++ b/arch/sh/include/asm/pgtable.h @@ -18,6 +18,7 @@ #include #endif #include +#include #ifndef __ASSEMBLY__ #include -- cgit v1.2.3-18-g5258 From 3f9b8520b06013939ad247ba08b69529b5f14be1 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 31 May 2011 14:38:29 +0900 Subject: sh64: Move from P1SEG to CAC_ADDR for consistent sync. sh64 doesn't define a P1SEGADDR, resulting in a build failure. The proper mapping can be attained for both sh32 and 64 via the CAC_ADDR macro, so switch to that instead. Signed-off-by: Paul Mundt --- arch/sh/mm/consistent.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c index 40733a95240..f251b5f2765 100644 --- a/arch/sh/mm/consistent.c +++ b/arch/sh/mm/consistent.c @@ -82,7 +82,7 @@ void dma_cache_sync(struct device *dev, void *vaddr, size_t size, void *addr; addr = __in_29bit_mode() ? - (void *)P1SEGADDR((unsigned long)vaddr) : vaddr; + (void *)CAC_ADDR((unsigned long)vaddr) : vaddr; switch (direction) { case DMA_FROM_DEVICE: /* invalidate only */ -- cgit v1.2.3-18-g5258 From db7eba292e913390fa881272bfbc3da0a5380513 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 31 May 2011 14:39:49 +0900 Subject: sh: Fix up asm-generic/ptrace.h fallout. There was an ordering issue with regards to instruction_pointer() being used in profile_pc() prior to the asm-generic/ptrace.h include, which subsequently provided the instruction_pointer() definition. In the interest of simplicity we simply open-code the regs->pc deref for the profile_pc() definition instead. The FP functions were also broken due to a lack of a common regs->fp, so provide a common GET_FP() that is safe for both architectures in order to fix up the frame pointer helpers too. Signed-off-by: Paul Mundt --- arch/sh/include/asm/ptrace.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h index 40725b4a801..88bd6be168a 100644 --- a/arch/sh/include/asm/ptrace.h +++ b/arch/sh/include/asm/ptrace.h @@ -41,7 +41,9 @@ #define user_mode(regs) (((regs)->sr & 0x40000000)==0) #define kernel_stack_pointer(_regs) ((unsigned long)(_regs)->regs[15]) -#define GET_USP(regs) ((regs)->regs[15]) + +#define GET_FP(regs) ((regs)->regs[14]) +#define GET_USP(regs) ((regs)->regs[15]) extern void show_regs(struct pt_regs *); @@ -131,7 +133,7 @@ extern void ptrace_triggered(struct perf_event *bp, int nmi, static inline unsigned long profile_pc(struct pt_regs *regs) { - unsigned long pc = instruction_pointer(regs); + unsigned long pc = regs->pc; if (virt_addr_uncached(pc)) return CAC_ADDR(pc); -- cgit v1.2.3-18-g5258 From d4905ce38c73964b868037e49a5945e1cf47a7f2 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 31 May 2011 15:23:20 +0900 Subject: Revert "clocksource: sh_tmu: Runtime PM support" This reverts commit 1b842e91fea9447eff5eb687e28ad61c02f5033e. There is a fundamental ordering race between the early and late probe paths and the runtime PM tie-in that results in __pm_runtime_resume() attempting to take a lock that hasn't been initialized yet (which by proxy also suggests that pm_runtime_init() hasn't yet been run on the device either, making the entire thing unsafe) -- resulting in instant death on SMP or on UP with spinlock debugging enabled: sh_tmu.0: used for clock events sh_tmu.0: used for periodic clock events BUG: spinlock trylock failure on UP on CPU#0, swapper/0 lock: 804db198, .magic: 00000000, .owner: /-1, .owner_cpu: 0 ... Revert it for now until the ordering issues can be resolved, or we can get some more help from the runtime PM framework to make this possible. Signed-off-by: Paul Mundt --- drivers/clocksource/sh_tmu.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c index 17296288a20..80813576861 100644 --- a/drivers/clocksource/sh_tmu.c +++ b/drivers/clocksource/sh_tmu.c @@ -25,7 +25,6 @@ #include #include #include -#include #include #include #include @@ -110,12 +109,10 @@ static int sh_tmu_enable(struct sh_tmu_priv *p) { int ret; - /* wake up device and enable clock */ - pm_runtime_get_sync(&p->pdev->dev); + /* enable clock */ ret = clk_enable(p->clk); if (ret) { dev_err(&p->pdev->dev, "cannot enable clock\n"); - pm_runtime_put_sync(&p->pdev->dev); return ret; } @@ -144,9 +141,8 @@ static void sh_tmu_disable(struct sh_tmu_priv *p) /* disable interrupts in TMU block */ sh_tmu_write(p, TCR, 0x0000); - /* stop clock and mark device as idle */ + /* stop clock */ clk_disable(p->clk); - pm_runtime_put_sync(&p->pdev->dev); } static void sh_tmu_set_next(struct sh_tmu_priv *p, unsigned long delta, @@ -415,7 +411,6 @@ static int __devinit sh_tmu_probe(struct platform_device *pdev) if (p) { dev_info(&pdev->dev, "kept as earlytimer\n"); - pm_runtime_enable(&pdev->dev); return 0; } @@ -430,9 +425,6 @@ static int __devinit sh_tmu_probe(struct platform_device *pdev) kfree(p); platform_set_drvdata(pdev, NULL); } - - if (!is_early_platform_device(pdev)) - pm_runtime_enable(&pdev->dev); return ret; } -- cgit v1.2.3-18-g5258 From 9436b4abec28a22edd961ae375535d940625f1f2 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 31 May 2011 15:26:42 +0900 Subject: Revert "clocksource: sh_cmt: Runtime PM support" This reverts commit 01fa68b58492a5d6708a91c1f474b6a099a9509e. The same note as per the sh_tmu change applies here, too. Signed-off-by: Paul Mundt --- drivers/clocksource/sh_cmt.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index 036e5865eb4..dc7c033ef58 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #include #include @@ -153,12 +152,10 @@ static int sh_cmt_enable(struct sh_cmt_priv *p, unsigned long *rate) { int ret; - /* wake up device and enable clock */ - pm_runtime_get_sync(&p->pdev->dev); + /* enable clock */ ret = clk_enable(p->clk); if (ret) { dev_err(&p->pdev->dev, "cannot enable clock\n"); - pm_runtime_put_sync(&p->pdev->dev); return ret; } @@ -190,9 +187,8 @@ static void sh_cmt_disable(struct sh_cmt_priv *p) /* disable interrupts in CMT block */ sh_cmt_write(p, CMCSR, 0); - /* stop clock and mark device as idle */ + /* stop clock */ clk_disable(p->clk); - pm_runtime_put_sync(&p->pdev->dev); } /* private flags */ @@ -664,7 +660,6 @@ static int __devinit sh_cmt_probe(struct platform_device *pdev) if (p) { dev_info(&pdev->dev, "kept as earlytimer\n"); - pm_runtime_enable(&pdev->dev); return 0; } @@ -679,9 +674,6 @@ static int __devinit sh_cmt_probe(struct platform_device *pdev) kfree(p); platform_set_drvdata(pdev, NULL); } - - if (!is_early_platform_device(pdev)) - pm_runtime_enable(&pdev->dev); return ret; } -- cgit v1.2.3-18-g5258 From 5c2de44417523385010b529599a2b30f290831a3 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 31 May 2011 15:53:03 +0900 Subject: dmaengine: shdma: Fix up fallout from runtime PM changes. The runtime PM changes introduce sh_dmae_rst() wrapping via the runtime_resume helper, depending on dev_get_drvdata() to fetch the platform data needed for the DMAOR initialization default at a time where drvdata hasn't yet been established by the probe path, resulting in general probe misery: Unable to handle kernel NULL pointer dereference at virtual address 000000c4 pc = 8025adee *pde = 00000000 Oops: 0000 [#1] Modules linked in: Pid : 1, Comm: swapper CPU : 0 Not tainted (3.0.0-rc1-00012-g9436b4a-dirty #1456) PC is at sh_dmae_rst+0x28/0x86 PR is at sh_dmae_rst+0x22/0x86 PC : 8025adee SP : 9e803d10 SR : 400080f1 TEA : 000000c4 R0 : 000000c4 R1 : 0000fff8 R2 : 00000000 R3 : 00000040 R4 : 000000f0 R5 : 00000000 R6 : 00000000 R7 : 804f184c R8 : 00000000 R9 : 804dd0e8 R10 : 80283204 R11 : ffffffda R12 : 000000a0 R13 : 804dd18c R14 : 9e803d10 MACH: 00000000 MACL: 00008f20 GBR : 00000000 PR : 8025ade8 Call trace: [<8025ae70>] sh_dmae_runtime_resume+0x24/0x34 [<80283238>] pm_generic_runtime_resume+0x34/0x3c [<80283370>] rpm_callback+0x4a/0x7e [<80283efc>] rpm_resume+0x240/0x384 [<80283f54>] rpm_resume+0x298/0x384 [<8028428c>] __pm_runtime_resume+0x44/0x7c [<8038a358>] __ioremap_caller+0x0/0xec [<80284296>] __pm_runtime_resume+0x4e/0x7c [<8038a358>] __ioremap_caller+0x0/0xec [<80666254>] sh_dmae_probe+0x180/0x6a0 [<802803ae>] platform_drv_probe+0x26/0x2e Fix up the ordering accordingly. Signed-off-by: Paul Mundt --- drivers/dma/shdma.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c index 636e40925b1..727e76ff13e 100644 --- a/drivers/dma/shdma.c +++ b/drivers/dma/shdma.c @@ -1144,6 +1144,8 @@ static int __init sh_dmae_probe(struct platform_device *pdev) /* platform data */ shdev->pdata = pdata; + platform_set_drvdata(pdev, shdev); + pm_runtime_enable(&pdev->dev); pm_runtime_get_sync(&pdev->dev); @@ -1256,7 +1258,6 @@ static int __init sh_dmae_probe(struct platform_device *pdev) pm_runtime_put(&pdev->dev); - platform_set_drvdata(pdev, shdev); dma_async_device_register(&shdev->common); return err; @@ -1278,6 +1279,8 @@ rst_err: if (dmars) iounmap(shdev->dmars); + + platform_set_drvdata(pdev, NULL); emapdmars: iounmap(shdev->chan_reg); synchronize_rcu(); @@ -1316,6 +1319,8 @@ static int __exit sh_dmae_remove(struct platform_device *pdev) iounmap(shdev->dmars); iounmap(shdev->chan_reg); + platform_set_drvdata(pdev, NULL); + synchronize_rcu(); kfree(shdev); -- cgit v1.2.3-18-g5258 From ea9d6553b3b3044e7374774cc33bb1b2eee19dd3 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Tue, 31 May 2011 13:45:53 +0200 Subject: block: remove unwanted semicolons Since those defined functions require additional semicolon from the caller, they could cause potential syntax errors when used in if-else statements. Signed-off-by: Namhyung Kim Acked-by: Martin K. Petersen Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index ae9091a6848..1a23722e887 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -1282,8 +1282,8 @@ queue_max_integrity_segments(struct request_queue *q) #define blk_get_integrity(a) (0) #define blk_integrity_compare(a, b) (0) #define blk_integrity_register(a, b) (0) -#define blk_integrity_unregister(a) do { } while (0); -#define blk_queue_max_integrity_segments(a, b) do { } while (0); +#define blk_integrity_unregister(a) do { } while (0) +#define blk_queue_max_integrity_segments(a, b) do { } while (0) #define queue_max_integrity_segments(a) (0) #define blk_integrity_merge_rq(a, b, c) (0) #define blk_integrity_merge_bio(a, b, c) (0) -- cgit v1.2.3-18-g5258 From 4495a7d41dbda03841c2a1c2a5ce7135a45131ba Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Tue, 31 May 2011 10:04:09 +0200 Subject: CFQ: Fix typo and remove unnecessary semicolon Fix comment typo and remove unnecessary semicolon at macro Signed-off-by: Kyungmin Park Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 7c52d688892..8a02c955c61 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -185,7 +185,7 @@ struct cfq_group { int nr_cfqq; /* - * Per group busy queus average. Useful for workload slice calc. We + * Per group busy queues average. Useful for workload slice calc. We * create the array for each prio class but at run time it is used * only for RT and BE class and slot for IDLE class remains unused. * This is primarily done to avoid confusion and a gcc warning. @@ -369,16 +369,16 @@ CFQ_CFQQ_FNS(wait_busy); #define cfq_log_cfqq(cfqd, cfqq, fmt, args...) \ blk_add_trace_msg((cfqd)->queue, "cfq%d%c %s " fmt, (cfqq)->pid, \ cfq_cfqq_sync((cfqq)) ? 'S' : 'A', \ - blkg_path(&(cfqq)->cfqg->blkg), ##args); + blkg_path(&(cfqq)->cfqg->blkg), ##args) #define cfq_log_cfqg(cfqd, cfqg, fmt, args...) \ blk_add_trace_msg((cfqd)->queue, "%s " fmt, \ - blkg_path(&(cfqg)->blkg), ##args); \ + blkg_path(&(cfqg)->blkg), ##args) \ #else #define cfq_log_cfqq(cfqd, cfqq, fmt, args...) \ blk_add_trace_msg((cfqd)->queue, "cfq%d " fmt, (cfqq)->pid, ##args) -#define cfq_log_cfqg(cfqd, cfqg, fmt, args...) do {} while (0); +#define cfq_log_cfqg(cfqd, cfqg, fmt, args...) do {} while (0) #endif #define cfq_log(cfqd, fmt, args...) \ blk_add_trace_msg((cfqd)->queue, "cfq " fmt, ##args) -- cgit v1.2.3-18-g5258 From 71005be40a7fc95edda3cc462361ce0243e4f5fa Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Thu, 26 May 2011 21:31:08 +0100 Subject: libertas: Set command sequence number later to ensure consistency Before this patch, the command sequence number is being set before lbs_queue_cmd() adds the command to the queue. However, lbs_queue_cmd() sometimes forces commands to queue-jump (e.g. CMD_802_11_WAKEUP_CONFIRM). It currently does this without considering that sequence numbers might need adjusting to keep things running in order. Fix this by setting the sequence number at a later stage, just before we're actually submitting the command to the hardware. Also fixes a possible race where seqnum was being modified outside of the driver lock. Signed-off-by: Daniel Drake Acked-by: Dan Williams Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/cmd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c index 84566db486d..71c8f3fccfa 100644 --- a/drivers/net/wireless/libertas/cmd.c +++ b/drivers/net/wireless/libertas/cmd.c @@ -994,6 +994,8 @@ static void lbs_submit_command(struct lbs_private *priv, cmd = cmdnode->cmdbuf; spin_lock_irqsave(&priv->driver_lock, flags); + priv->seqnum++; + cmd->seqnum = cpu_to_le16(priv->seqnum); priv->cur_cmd = cmdnode; spin_unlock_irqrestore(&priv->driver_lock, flags); @@ -1621,11 +1623,9 @@ struct cmd_ctrl_node *__lbs_cmd_async(struct lbs_private *priv, /* Copy the incoming command to the buffer */ memcpy(cmdnode->cmdbuf, in_cmd, in_cmd_size); - /* Set sequence number, clean result, move to buffer */ - priv->seqnum++; + /* Set command, clean result, move to buffer */ cmdnode->cmdbuf->command = cpu_to_le16(command); cmdnode->cmdbuf->size = cpu_to_le16(in_cmd_size); - cmdnode->cmdbuf->seqnum = cpu_to_le16(priv->seqnum); cmdnode->cmdbuf->result = 0; lbs_deb_host("PREP_CMD: command 0x%04x\n", command); -- cgit v1.2.3-18-g5258 From dd08682150e1815fe5cdd0673a2f2e9cd2d55a7a Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Fri, 27 May 2011 15:34:45 +0300 Subject: wl12xx: fix passive and radar channel generation for scheduled scan We were comparing bitwise AND results with a boolean, so when the boolean was set to true, it was not matching as it should. Fix this by booleanizing the bitwise AND results with !!. Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/scan.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c index f37e5a39197..f223e0ed0c4 100644 --- a/drivers/net/wireless/wl12xx/scan.c +++ b/drivers/net/wireless/wl12xx/scan.c @@ -338,8 +338,8 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl, flags = req->channels[i]->flags; if (!(flags & IEEE80211_CHAN_DISABLED) && - ((flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive) && - ((flags & IEEE80211_CHAN_RADAR) == radar) && + (!!(flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive) && + (!!(flags & IEEE80211_CHAN_RADAR) == radar) && (req->channels[i]->band == band)) { wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ", req->channels[i]->band, -- cgit v1.2.3-18-g5258 From 2497a246e880d1fb537f754f551177c01fa39242 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Fri, 27 May 2011 15:34:46 +0300 Subject: wl12xx: fix DFS channels handling in scheduled scan DFS channels were never getting included in the scheduled scans, because they always contain the passive flag as well and the call was asking for DFS and active channels. Fix this by ignoring the passive flag when collecting DFS channels. Also, move the DFS channels in the channel list before the 5GHz active channels (this was implemented in the FW differently than specified). Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/scan.c | 31 ++++++++++++++++++++----------- drivers/net/wireless/wl12xx/scan.h | 3 +++ 2 files changed, 23 insertions(+), 11 deletions(-) diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c index f223e0ed0c4..8ccbb911776 100644 --- a/drivers/net/wireless/wl12xx/scan.c +++ b/drivers/net/wireless/wl12xx/scan.c @@ -337,10 +337,12 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl, i++) { flags = req->channels[i]->flags; - if (!(flags & IEEE80211_CHAN_DISABLED) && - (!!(flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive) && + if ((req->channels[i]->band == band) && + !(flags & IEEE80211_CHAN_DISABLED) && (!!(flags & IEEE80211_CHAN_RADAR) == radar) && - (req->channels[i]->band == band)) { + /* if radar is set, we ignore the passive flag */ + (radar || + !!(flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive)) { wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ", req->channels[i]->band, req->channels[i]->center_freq); @@ -350,6 +352,8 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl, wl1271_debug(DEBUG_SCAN, "max_power %d", req->channels[i]->max_power); + if (flags & IEEE80211_CHAN_RADAR) + channels[j].flags |= SCAN_CHANNEL_FLAGS_DFS; if (flags & IEEE80211_CHAN_PASSIVE_SCAN) { channels[j].passive_duration = cpu_to_le16(c->dwell_time_passive); @@ -359,7 +363,7 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl, channels[j].max_duration = cpu_to_le16(c->max_dwell_time_active); } - channels[j].tx_power_att = req->channels[j]->max_power; + channels[j].tx_power_att = req->channels[i]->max_power; channels[j].channel = req->channels[i]->hw_value; j++; @@ -386,7 +390,11 @@ wl1271_scan_sched_scan_channels(struct wl1271 *wl, wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels, IEEE80211_BAND_2GHZ, false, false, idx); - idx += cfg->active[0]; + /* + * 5GHz channels always start at position 14, not immediately + * after the last 2.4GHz channel + */ + idx = 14; cfg->passive[1] = wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels, @@ -394,22 +402,23 @@ wl1271_scan_sched_scan_channels(struct wl1271 *wl, false, true, idx); idx += cfg->passive[1]; - cfg->active[1] = + cfg->dfs = wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels, IEEE80211_BAND_5GHZ, - false, false, 14); - idx += cfg->active[1]; + true, true, idx); + idx += cfg->dfs; - cfg->dfs = + cfg->active[1] = wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels, IEEE80211_BAND_5GHZ, - true, false, idx); - idx += cfg->dfs; + false, false, idx); + idx += cfg->active[1]; wl1271_debug(DEBUG_SCAN, " 2.4GHz: active %d passive %d", cfg->active[0], cfg->passive[0]); wl1271_debug(DEBUG_SCAN, " 5GHz: active %d passive %d", cfg->active[1], cfg->passive[1]); + wl1271_debug(DEBUG_SCAN, " DFS: %d", cfg->dfs); return idx; } diff --git a/drivers/net/wireless/wl12xx/scan.h b/drivers/net/wireless/wl12xx/scan.h index c83319579ca..a0b6c5d67b0 100644 --- a/drivers/net/wireless/wl12xx/scan.h +++ b/drivers/net/wireless/wl12xx/scan.h @@ -137,6 +137,9 @@ enum { SCAN_BSS_TYPE_ANY, }; +#define SCAN_CHANNEL_FLAGS_DFS BIT(0) +#define SCAN_CHANNEL_FLAGS_DFS_ENABLED BIT(1) + struct conn_scan_ch_params { __le16 min_duration; __le16 max_duration; -- cgit v1.2.3-18-g5258 From 50a66d7f04adbfab9db55144c58dc693358cb635 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Fri, 27 May 2011 15:34:47 +0300 Subject: wl12xx: add separate config value for DFS dwell time on sched scan Use a different value for DFS dwell time when performing a scheduled scan. Previously we were using the same value as for normal passive scans. This adds some flexibility between these two different types of passive scan. For now we use 150 TUs for DFS channel dwell time. This may need to be fine-tuned in the future. Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/conf.h | 3 +++ drivers/net/wireless/wl12xx/main.c | 1 + drivers/net/wireless/wl12xx/scan.c | 7 +++++-- 3 files changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h index 1ab6c86aac4..c83fefb6662 100644 --- a/drivers/net/wireless/wl12xx/conf.h +++ b/drivers/net/wireless/wl12xx/conf.h @@ -1157,6 +1157,9 @@ struct conf_sched_scan_settings { /* time to wait on the channel for passive scans (in TUs) */ u32 dwell_time_passive; + /* time to wait on the channel for DFS scans (in TUs) */ + u32 dwell_time_dfs; + /* number of probe requests to send on each channel in active scans */ u8 num_probe_reqs; diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c index bc00e52f644..e6497dc669d 100644 --- a/drivers/net/wireless/wl12xx/main.c +++ b/drivers/net/wireless/wl12xx/main.c @@ -311,6 +311,7 @@ static struct conf_drv_settings default_conf = { .min_dwell_time_active = 8, .max_dwell_time_active = 30, .dwell_time_passive = 100, + .dwell_time_dfs = 150, .num_probe_reqs = 2, .rssi_threshold = -90, .snr_threshold = 0, diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c index 8ccbb911776..28ec0addc65 100644 --- a/drivers/net/wireless/wl12xx/scan.c +++ b/drivers/net/wireless/wl12xx/scan.c @@ -352,9 +352,12 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl, wl1271_debug(DEBUG_SCAN, "max_power %d", req->channels[i]->max_power); - if (flags & IEEE80211_CHAN_RADAR) + if (flags & IEEE80211_CHAN_RADAR) { channels[j].flags |= SCAN_CHANNEL_FLAGS_DFS; - if (flags & IEEE80211_CHAN_PASSIVE_SCAN) { + channels[j].passive_duration = + cpu_to_le16(c->dwell_time_dfs); + } + else if (flags & IEEE80211_CHAN_PASSIVE_SCAN) { channels[j].passive_duration = cpu_to_le16(c->dwell_time_passive); } else { -- cgit v1.2.3-18-g5258 From 66870b1ccd5c1460e437c18b0026e2dcaab1ece9 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Fri, 27 May 2011 15:34:48 +0300 Subject: wl12xx: fix oops in sched_scan when forcing a passive scan Fix kernel oops when trying to use passive scheduled scans. The reason was that in passive scans there are no SSIDs, so there was a NULL pointer dereference. To solve the problem, we now check the number of SSIDs provided in the sched_scan request and only access the list if there's one or more (ie. passive scan is not forced). We also force all the channels to be passive by adding the IEEE80211_CHAN_PASSIVE_SCAN flag locally before the checks in the wl1271_scan_get_sched_scan_channels() function. Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/scan.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c index 28ec0addc65..56f76abc754 100644 --- a/drivers/net/wireless/wl12xx/scan.c +++ b/drivers/net/wireless/wl12xx/scan.c @@ -331,12 +331,16 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl, struct conf_sched_scan_settings *c = &wl->conf.sched_scan; int i, j; u32 flags; + bool force_passive = !req->n_ssids; for (i = 0, j = start; i < req->n_channels && j < MAX_CHANNELS_ALL_BANDS; i++) { flags = req->channels[i]->flags; + if (force_passive) + flags |= IEEE80211_CHAN_PASSIVE_SCAN; + if ((req->channels[i]->band == band) && !(flags & IEEE80211_CHAN_DISABLED) && (!!(flags & IEEE80211_CHAN_RADAR) == radar) && @@ -433,6 +437,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl, struct wl1271_cmd_sched_scan_config *cfg = NULL; struct conf_sched_scan_settings *c = &wl->conf.sched_scan; int i, total_channels, ret; + bool force_passive = !req->n_ssids; wl1271_debug(DEBUG_CMD, "cmd sched_scan scan config"); @@ -456,7 +461,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl, for (i = 0; i < SCAN_MAX_CYCLE_INTERVALS; i++) cfg->intervals[i] = cpu_to_le32(req->interval); - if (req->ssids[0].ssid_len && req->ssids[0].ssid) { + if (!force_passive && req->ssids[0].ssid_len && req->ssids[0].ssid) { cfg->filter_type = SCAN_SSID_FILTER_SPECIFIC; cfg->ssid_len = req->ssids[0].ssid_len; memcpy(cfg->ssid, req->ssids[0].ssid, @@ -473,7 +478,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl, goto out; } - if (cfg->active[0]) { + if (!force_passive && cfg->active[0]) { ret = wl1271_cmd_build_probe_req(wl, req->ssids[0].ssid, req->ssids[0].ssid_len, ies->ie[IEEE80211_BAND_2GHZ], @@ -485,7 +490,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl, } } - if (cfg->active[1]) { + if (!force_passive && cfg->active[1]) { ret = wl1271_cmd_build_probe_req(wl, req->ssids[0].ssid, req->ssids[0].ssid_len, ies->ie[IEEE80211_BAND_5GHZ], -- cgit v1.2.3-18-g5258 From 59342f6a6bc35df623fb44784daa5e1077063b8f Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Mon, 30 May 2011 10:15:47 +0300 Subject: zd1211rw: fix to work on OHCI zd1211 devices register 'EP 4 OUT' endpoint as Interrupt type on USB 2.0: Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 However on USB 1.1 endpoint becomes Bulk: Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Commit 37939810b937aba830dd751291fcdc51cae1a6cb assumed that endpoint is always interrupt type and changed usb_bulk_msg() calls to usb_interrupt_msg(). Problem here is that usb_bulk_msg() on interrupt endpoint selfcorrects the call and changes requested pipe to interrupt type (see usb_bulk_msg). However with usb_interrupt_msg() on bulk endpoint does not correct the pipe type to bulk, but instead URB is submitted with interrupt type pipe. So pre-2.6.39 used usb_bulk_msg() and therefore worked with both endpoint types, however in 2.6.39 usb_interrupt_msg() with bulk endpoint causes ohci_hcd to fail submitted URB instantly with -ENOSPC and preventing zd1211rw from working with OHCI. Fix this by detecting endpoint type and using correct endpoint/pipe types for URB. Also fix asynchronous zd_usb_iowrite16v_async() to use right URB type on 'EP 4 OUT'. Cc: stable@kernel.org Signed-off-by: Jussi Kivilinna Signed-off-by: John W. Linville --- drivers/net/wireless/zd1211rw/zd_usb.c | 53 +++++++++++++++++++++++++++------- 1 file changed, 42 insertions(+), 11 deletions(-) diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index 0e819943b9e..631194d4982 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -1533,6 +1533,31 @@ static void __exit usb_exit(void) module_init(usb_init); module_exit(usb_exit); +static int zd_ep_regs_out_msg(struct usb_device *udev, void *data, int len, + int *actual_length, int timeout) +{ + /* In USB 2.0 mode EP_REGS_OUT endpoint is interrupt type. However in + * USB 1.1 mode endpoint is bulk. Select correct type URB by endpoint + * descriptor. + */ + struct usb_host_endpoint *ep; + unsigned int pipe; + + pipe = usb_sndintpipe(udev, EP_REGS_OUT); + ep = usb_pipe_endpoint(udev, pipe); + if (!ep) + return -EINVAL; + + if (usb_endpoint_xfer_int(&ep->desc)) { + return usb_interrupt_msg(udev, pipe, data, len, + actual_length, timeout); + } else { + pipe = usb_sndbulkpipe(udev, EP_REGS_OUT); + return usb_bulk_msg(udev, pipe, data, len, actual_length, + timeout); + } +} + static int usb_int_regs_length(unsigned int count) { return sizeof(struct usb_int_regs) + count * sizeof(struct reg_data); @@ -1648,15 +1673,14 @@ int zd_usb_ioread16v(struct zd_usb *usb, u16 *values, udev = zd_usb_to_usbdev(usb); prepare_read_regs_int(usb); - r = usb_interrupt_msg(udev, usb_sndintpipe(udev, EP_REGS_OUT), - req, req_len, &actual_req_len, 50 /* ms */); + r = zd_ep_regs_out_msg(udev, req, req_len, &actual_req_len, 50 /*ms*/); if (r) { dev_dbg_f(zd_usb_dev(usb), - "error in usb_interrupt_msg(). Error number %d\n", r); + "error in zd_ep_regs_out_msg(). Error number %d\n", r); goto error; } if (req_len != actual_req_len) { - dev_dbg_f(zd_usb_dev(usb), "error in usb_interrupt_msg()\n" + dev_dbg_f(zd_usb_dev(usb), "error in zd_ep_regs_out_msg()\n" " req_len %d != actual_req_len %d\n", req_len, actual_req_len); r = -EIO; @@ -1818,9 +1842,17 @@ int zd_usb_iowrite16v_async(struct zd_usb *usb, const struct zd_ioreq16 *ioreqs, rw->value = cpu_to_le16(ioreqs[i].value); } - usb_fill_int_urb(urb, udev, usb_sndintpipe(udev, EP_REGS_OUT), - req, req_len, iowrite16v_urb_complete, usb, - ep->desc.bInterval); + /* In USB 2.0 mode endpoint is interrupt type. However in USB 1.1 mode + * endpoint is bulk. Select correct type URB by endpoint descriptor. + */ + if (usb_endpoint_xfer_int(&ep->desc)) + usb_fill_int_urb(urb, udev, usb_sndintpipe(udev, EP_REGS_OUT), + req, req_len, iowrite16v_urb_complete, usb, + ep->desc.bInterval); + else + usb_fill_bulk_urb(urb, udev, usb_sndbulkpipe(udev, EP_REGS_OUT), + req, req_len, iowrite16v_urb_complete, usb); + urb->transfer_flags |= URB_FREE_BUFFER; /* Submit previous URB */ @@ -1924,15 +1956,14 @@ int zd_usb_rfwrite(struct zd_usb *usb, u32 value, u8 bits) } udev = zd_usb_to_usbdev(usb); -