From a62e8f1978f49e52f87a711ff6711b323d4b12ff Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Thu, 24 Dec 2009 11:34:16 +0300 Subject: ACPI: EC: Accelerate query execution Split EC query handling into acknowledge and execution phase. This allows much smaller pending query lattency and lowers chances of EC going "wild" and losing events. Reference: http://bugzilla.kernel.org/show_bug.cgi?id=14858 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/ec.c | 122 ++++++++++++++++++++++++++++++++++-------------------- 1 file changed, 77 insertions(+), 45 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index fd1801bdee6..9cc38857c33 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -201,14 +201,13 @@ unlock: spin_unlock_irqrestore(&ec->curr_lock, flags); } -static void acpi_ec_gpe_query(void *ec_cxt); +static int acpi_ec_sync_query(struct acpi_ec *ec); -static int ec_check_sci(struct acpi_ec *ec, u8 state) +static int ec_check_sci_sync(struct acpi_ec *ec, u8 state) { if (state & ACPI_EC_FLAG_SCI) { if (!test_and_set_bit(EC_FLAGS_QUERY_PENDING, &ec->flags)) - return acpi_os_execute(OSL_EC_BURST_HANDLER, - acpi_ec_gpe_query, ec); + return acpi_ec_sync_query(ec); } return 0; } @@ -249,11 +248,6 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, { unsigned long tmp; int ret = 0; - pr_debug(PREFIX "transaction start\n"); - /* disable GPE during transaction if storm is detected */ - if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) { - acpi_disable_gpe(NULL, ec->gpe); - } if (EC_FLAGS_MSI) udelay(ACPI_EC_MSI_UDELAY); /* start transaction */ @@ -269,16 +263,6 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, spin_lock_irqsave(&ec->curr_lock, tmp); ec->curr = NULL; spin_unlock_irqrestore(&ec->curr_lock, tmp); - if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) { - /* check if we received SCI during transaction */ - ec_check_sci(ec, acpi_ec_read_status(ec)); - /* it is safe to enable GPE outside of transaction */ - acpi_enable_gpe(NULL, ec->gpe); - } else if (t->irq_count > ACPI_EC_STORM_THRESHOLD) { - pr_info(PREFIX "GPE storm detected, " - "transactions will use polling mode\n"); - set_bit(EC_FLAGS_GPE_STORM, &ec->flags); - } return ret; } @@ -321,7 +305,24 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t) status = -ETIME; goto end; } + pr_debug(PREFIX "transaction start\n"); + /* disable GPE during transaction if storm is detected */ + if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) { + acpi_disable_gpe(NULL, ec->gpe); + } + status = acpi_ec_transaction_unlocked(ec, t); + + /* check if we received SCI during transaction */ + ec_check_sci_sync(ec, acpi_ec_read_status(ec)); + if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) { + /* it is safe to enable GPE outside of transaction */ + acpi_enable_gpe(NULL, ec->gpe); + } else if (t->irq_count > ACPI_EC_STORM_THRESHOLD) { + pr_info(PREFIX "GPE storm detected, " + "transactions will use polling mode\n"); + set_bit(EC_FLAGS_GPE_STORM, &ec->flags); + } end: if (ec->global_lock) acpi_release_global_lock(glk); @@ -443,7 +444,7 @@ int ec_transaction(u8 command, EXPORT_SYMBOL(ec_transaction); -static int acpi_ec_query(struct acpi_ec *ec, u8 * data) +static int acpi_ec_query_unlocked(struct acpi_ec *ec, u8 * data) { int result; u8 d; @@ -452,20 +453,16 @@ static int acpi_ec_query(struct acpi_ec *ec, u8 * data) .wlen = 0, .rlen = 1}; if (!ec || !data) return -EINVAL; - /* * Query the EC to find out which _Qxx method we need to evaluate. * Note that successful completion of the query causes the ACPI_EC_SCI * bit to be cleared (and thus clearing the interrupt source). */ - - result = acpi_ec_transaction(ec, &t); + result = acpi_ec_transaction_unlocked(ec, &t); if (result) return result; - if (!d) return -ENODATA; - *data = d; return 0; } @@ -509,43 +506,78 @@ void acpi_ec_remove_query_handler(struct acpi_ec *ec, u8 query_bit) EXPORT_SYMBOL_GPL(acpi_ec_remove_query_handler); -static void acpi_ec_gpe_query(void *ec_cxt) +static void acpi_ec_run(void *cxt) { - struct acpi_ec *ec = ec_cxt; - u8 value = 0; - struct acpi_ec_query_handler *handler, copy; - - if (!ec || acpi_ec_query(ec, &value)) + struct acpi_ec_query_handler *handler = cxt; + if (!handler) return; - mutex_lock(&ec->lock); + pr_debug(PREFIX "start query execution\n"); + if (handler->func) + handler->func(handler->data); + else if (handler->handle) + acpi_evaluate_object(handler->handle, NULL, NULL, NULL); + pr_debug(PREFIX "stop query execution\n"); + kfree(handler); +} + +static int acpi_ec_sync_query(struct acpi_ec *ec) +{ + u8 value = 0; + int status; + struct acpi_ec_query_handler *handler, *copy; + if ((status = acpi_ec_query_unlocked(ec, &value))) + return status; list_for_each_entry(handler, &ec->list, node) { if (value == handler->query_bit) { /* have custom handler for this bit */ - memcpy(©, handler, sizeof(copy)); - mutex_unlock(&ec->lock); - if (copy.func) { - copy.func(copy.data); - } else if (copy.handle) { - acpi_evaluate_object(copy.handle, NULL, NULL, NULL); - } - return; + copy = kmalloc(sizeof(*handler), GFP_KERNEL); + if (!copy) + return -ENOMEM; + memcpy(copy, handler, sizeof(*copy)); + pr_debug(PREFIX "push query execution (0x%2x) on queue\n", value); + return acpi_os_execute(OSL_GPE_HANDLER, + acpi_ec_run, copy); } } + return 0; +} + +static void acpi_ec_gpe_query(void *ec_cxt) +{ + struct acpi_ec *ec = ec_cxt; + if (!ec) + return; + mutex_lock(&ec->lock); + acpi_ec_sync_query(ec); mutex_unlock(&ec->lock); } +static void acpi_ec_gpe_query(void *ec_cxt); + +static int ec_check_sci(struct acpi_ec *ec, u8 state) +{ + if (state & ACPI_EC_FLAG_SCI) { + if (!test_and_set_bit(EC_FLAGS_QUERY_PENDING, &ec->flags)) { + pr_debug(PREFIX "push gpe query to the queue\n"); + return acpi_os_execute(OSL_NOTIFY_HANDLER, + acpi_ec_gpe_query, ec); + } + } + return 0; +} + static u32 acpi_ec_gpe_handler(void *data) { struct acpi_ec *ec = data; - u8 status; pr_debug(PREFIX "~~~> interrupt\n"); - status = acpi_ec_read_status(ec); - advance_transaction(ec, status); - if (ec_transaction_done(ec) && (status & ACPI_EC_FLAG_IBF) == 0) + advance_transaction(ec, acpi_ec_read_status(ec)); + if (ec_transaction_done(ec) && + (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF) == 0) { wake_up(&ec->wait); - ec_check_sci(ec, status); + ec_check_sci(ec, acpi_ec_read_status(ec)); + } return ACPI_INTERRUPT_HANDLED; } -- cgit v1.2.3-18-g5258 From 3b8cb427e9281790f36e847e46cb1d005a50cec0 Mon Sep 17 00:00:00 2001 From: Chen Gong Date: Mon, 14 Dec 2009 09:42:28 +0800 Subject: acpi_pad: fix error checks There are some fixes listed below: 1. When met a bogus BIOS, the return value of cpu number maybe is a negative value so that acpi_pad_pur get an unexpected result. 2. the return value of function acpi_pad_idle_cpus is useless. 3. enhance the process of create_power_saving_task/destroy_power_saving_task 4. Add more error checks when evaluating _PUR object. 5. one typo fix Signed-off-by: Chen Gong Acked-by: Shaohua Li Signed-off-by: Len Brown --- drivers/acpi/acpi_pad.c | 37 ++++++++++++++++++++----------------- 1 file changed, 20 insertions(+), 17 deletions(-) diff --git a/drivers/acpi/acpi_pad.c b/drivers/acpi/acpi_pad.c index 0d2cdb86158..a7bd49f0f01 100644 --- a/drivers/acpi/acpi_pad.c +++ b/drivers/acpi/acpi_pad.c @@ -207,7 +207,7 @@ static int power_saving_thread(void *data) * the mechanism only works when all CPUs have RT task running, * as if one CPU hasn't RT task, RT task from other CPUs will * borrow CPU time from this CPU and cause RT task use > 95% - * CPU time. To make 'avoid staration' work, takes a nap here. + * CPU time. To make 'avoid starvation' work, takes a nap here. */ if (do_sleep) schedule_timeout_killable(HZ * idle_pct / 100); @@ -221,14 +221,18 @@ static struct task_struct *ps_tsks[NR_CPUS]; static unsigned int ps_tsk_num; static int create_power_saving_task(void) { + int rc = -ENOMEM; + ps_tsks[ps_tsk_num] = kthread_run(power_saving_thread, (void *)(unsigned long)ps_tsk_num, "power_saving/%d", ps_tsk_num); - if (ps_tsks[ps_tsk_num]) { + rc = IS_ERR(ps_tsks[ps_tsk_num]) ? PTR_ERR(ps_tsks[ps_tsk_num]) : 0; + if (!rc) ps_tsk_num++; - return 0; - } - return -EINVAL; + else + ps_tsks[ps_tsk_num] = NULL; + + return rc; } static void destroy_power_saving_task(void) @@ -236,6 +240,7 @@ static void destroy_power_saving_task(void) if (ps_tsk_num > 0) { ps_tsk_num--; kthread_stop(ps_tsks[ps_tsk_num]); + ps_tsks[ps_tsk_num] = NULL; } } @@ -252,7 +257,7 @@ static void set_power_saving_task_num(unsigned int num) } } -static int acpi_pad_idle_cpus(unsigned int num_cpus) +static void acpi_pad_idle_cpus(unsigned int num_cpus) { get_online_cpus(); @@ -260,7 +265,6 @@ static int acpi_pad_idle_cpus(unsigned int num_cpus) set_power_saving_task_num(num_cpus); put_online_cpus(); - return 0; } static uint32_t acpi_pad_idle_cpus_num(void) @@ -368,19 +372,21 @@ static void acpi_pad_remove_sysfs(struct acpi_device *device) static int acpi_pad_pur(acpi_handle handle, int *num_cpus) { struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; - acpi_status status; union acpi_object *package; int rev, num, ret = -EINVAL; - status = acpi_evaluate_object(handle, "_PUR", NULL, &buffer); - if (ACPI_FAILURE(status)) + if (ACPI_FAILURE(acpi_evaluate_object(handle, "_PUR", NULL, &buffer))) + return -EINVAL; + + if (!buffer.length || !buffer.pointer) return -EINVAL; + package = buffer.pointer; if (package->type != ACPI_TYPE_PACKAGE || package->package.count != 2) goto out; rev = package->package.elements[0].integer.value; num = package->package.elements[1].integer.value; - if (rev != 1) + if (rev != 1 || num < 0) goto out; *num_cpus = num; ret = 0; @@ -409,7 +415,7 @@ static void acpi_pad_ost(acpi_handle handle, int stat, static void acpi_pad_handle_notify(acpi_handle handle) { - int num_cpus, ret; + int num_cpus; uint32_t idle_cpus; mutex_lock(&isolated_cpus_lock); @@ -417,12 +423,9 @@ static void acpi_pad_handle_notify(acpi_handle handle) mutex_unlock(&isolated_cpus_lock); return; } - ret = acpi_pad_idle_cpus(num_cpus); + acpi_pad_idle_cpus(num_cpus); idle_cpus = acpi_pad_idle_cpus_num(); - if (!ret) - acpi_pad_ost(handle, 0, idle_cpus); - else - acpi_pad_ost(handle, 1, 0); + acpi_pad_ost(handle, 0, idle_cpus); mutex_unlock(&isolated_cpus_lock); } -- cgit v1.2.3-18-g5258 From c504f8cb68eb0d6cde53ba043daff8cb34586493 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Wed, 30 Dec 2009 15:59:23 +0800 Subject: ACPI video: Prune dupe video devices, unless "video.allow_duplicates" Some buggy BIOS exports multiple ACPI video bus devices for the same VGA controller, and multiple backlight control methods as well. This messes up the ACPI video backlight control. http://bugzilla.kernel.org/show_bug.cgi?id=13577 With this patch applied, only the FIRST ACPI video bus device under a PCI device node is bind to ACPI video driver by default. If the first ACPI video bus device doesn't work well, we can use video.allow_duplicates=1 to go back to the old behavior. Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/video.c | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 05dff631591..45e6a29c817 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -78,6 +78,13 @@ MODULE_LICENSE("GPL"); static int brightness_switch_enabled = 1; module_param(brightness_switch_enabled, bool, 0644); +/* + * By default, we don't allow duplicate ACPI video bus devices + * under the same VGA controller + */ +static int allow_duplicates; +module_param(allow_duplicates, bool, 0644); + static int register_count = 0; static int acpi_video_bus_add(struct acpi_device *device); static int acpi_video_bus_remove(struct acpi_device *device, int type); @@ -2233,11 +2240,47 @@ static int acpi_video_resume(struct acpi_device *device) return AE_OK; } +static acpi_status +acpi_video_bus_match(acpi_handle handle, u32 level, void *context, + void **return_value) +{ + struct acpi_device *device = context; + struct acpi_device *sibling; + int result; + + if (handle == device->handle) + return AE_CTRL_TERMINATE; + + result = acpi_bus_get_device(handle, &sibling); + if (result) + return AE_OK; + + if (!strcmp(acpi_device_name(sibling), ACPI_VIDEO_BUS_NAME)) + return AE_ALREADY_EXISTS; + + return AE_OK; +} + static int acpi_video_bus_add(struct acpi_device *device) { struct acpi_video_bus *video; struct input_dev *input; int error; + acpi_status status; + + status = acpi_walk_namespace(ACPI_TYPE_DEVICE, + device->parent->handle, 1, + acpi_video_bus_match, NULL, + device, NULL); + if (status == AE_ALREADY_EXISTS) { + printk(KERN_WARNING FW_BUG + "Duplicate ACPI video bus devices for the" + " same VGA controller, please try module " + "parameter \"video.allow_duplicates=1\"" + "if the current driver doesn't work.\n"); + if (!allow_duplicates) + return -ENODEV; + } video = kzalloc(sizeof(struct acpi_video_bus), GFP_KERNEL); if (!video) -- cgit v1.2.3-18-g5258 From 8558e3943df1c51c3377cb4e8a52ea484d6f357d Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 6 Jan 2010 16:11:06 -0500 Subject: x86, ACPI: delete acpi_boot_table_init() return value cleanup only. setup_arch(), doesn't care care if ACPI initialization succeeded or failed, so delete acpi_boot_table_init()'s return value. Signed-off-by: Len Brown --- arch/x86/kernel/acpi/boot.c | 22 ++++++---------------- include/linux/acpi.h | 6 +++--- 2 files changed, 9 insertions(+), 19 deletions(-) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index fb1035cd9a6..036d28adf59 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -1529,16 +1529,10 @@ static struct dmi_system_id __initdata acpi_dmi_table_late[] = { * if acpi_blacklisted() acpi_disabled = 1; * acpi_irq_model=... * ... - * - * return value: (currently ignored) - * 0: success - * !0: failure */ -int __init acpi_boot_table_init(void) +void __init acpi_boot_table_init(void) { - int error; - dmi_check_system(acpi_dmi_table); /* @@ -1546,15 +1540,14 @@ int __init acpi_boot_table_init(void) * One exception: acpi=ht continues far enough to enumerate LAPICs */ if (acpi_disabled && !acpi_ht) - return 1; + return; /* * Initialize the ACPI boot-time table parser. */ - error = acpi_table_init(); - if (error) { + if (acpi_table_init()) { disable_acpi(); - return error; + return; } acpi_table_parse(ACPI_SIG_BOOT, acpi_parse_sbf); @@ -1562,18 +1555,15 @@ int __init acpi_boot_table_init(void) /* * blacklist may disable ACPI entirely */ - error = acpi_blacklisted(); - if (error) { + if (acpi_blacklisted()) { if (acpi_force) { printk(KERN_WARNING PREFIX "acpi=force override\n"); } else { printk(KERN_WARNING PREFIX "Disabling ACPI support\n"); disable_acpi(); - return error; + return; } } - - return 0; } int __init early_acpi_boot_init(void) diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 36924255c0d..b926afe8c03 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -80,7 +80,7 @@ char * __acpi_map_table (unsigned long phys_addr, unsigned long size); void __acpi_unmap_table(char *map, unsigned long size); int early_acpi_boot_init(void); int acpi_boot_init (void); -int acpi_boot_table_init (void); +void acpi_boot_table_init (void); int acpi_mps_check (void); int acpi_numa_init (void); @@ -321,9 +321,9 @@ static inline int acpi_boot_init(void) return 0; } -static inline int acpi_boot_table_init(void) +static inline void acpi_boot_table_init(void) { - return 0; + return; } static inline int acpi_mps_check(void) -- cgit v1.2.3-18-g5258 From f5347867c5aea94c625246eaff8f7820b0a4cd8a Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Wed, 30 Dec 2009 15:53:03 +0300 Subject: ACPI: SBS: Move SBS HC callback to faster Notify queue SBS transactions should happen in Notify work queue, to not create a dead lock with GPE execution accessing SBS devices. Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/ec.c | 3 ++- drivers/acpi/sbshc.c | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 9cc38857c33..04733092982 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -535,7 +535,8 @@ static int acpi_ec_sync_query(struct acpi_ec *ec) return -ENOMEM; memcpy(copy, handler, sizeof(*copy)); pr_debug(PREFIX "push query execution (0x%2x) on queue\n", value); - return acpi_os_execute(OSL_GPE_HANDLER, + return acpi_os_execute((copy->func) ? + OSL_NOTIFY_HANDLER : OSL_GPE_HANDLER, acpi_ec_run, copy); } } diff --git a/drivers/acpi/sbshc.c b/drivers/acpi/sbshc.c index d9339806df4..fd09229282e 100644 --- a/drivers/acpi/sbshc.c +++ b/drivers/acpi/sbshc.c @@ -242,7 +242,7 @@ static int smbus_alarm(void *context) case ACPI_SBS_CHARGER: case ACPI_SBS_MANAGER: case ACPI_SBS_BATTERY: - acpi_os_execute(OSL_GPE_HANDLER, + acpi_os_execute(OSL_NOTIFY_HANDLER, acpi_smbus_callback, hc); default:; } -- cgit v1.2.3-18-g5258 From 54070101f86ca9a6e9ba243c999d144721ec3db7 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Wed, 30 Dec 2009 15:53:10 +0300 Subject: ACPI: EC: Add wait for irq storm Merge of poll and irq modes accelerated EC transaction, so that keyboard starts to suffer again. Add msleep(1) into transaction path for the storm to allow keyboard controller to do its job. Reference: http://bugzilla.kernel.org/show_bug.cgi?id=14747 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/ec.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 04733092982..d6471bb6852 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -259,7 +259,6 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags); spin_unlock_irqrestore(&ec->curr_lock, tmp); ret = ec_poll(ec); - pr_debug(PREFIX "transaction end\n"); spin_lock_irqsave(&ec->curr_lock, tmp); ec->curr = NULL; spin_unlock_irqrestore(&ec->curr_lock, tmp); @@ -316,6 +315,7 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t) /* check if we received SCI during transaction */ ec_check_sci_sync(ec, acpi_ec_read_status(ec)); if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) { + msleep(1); /* it is safe to enable GPE outside of transaction */ acpi_enable_gpe(NULL, ec->gpe); } else if (t->irq_count > ACPI_EC_STORM_THRESHOLD) { @@ -323,6 +323,7 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t) "transactions will use polling mode\n"); set_bit(EC_FLAGS_GPE_STORM, &ec->flags); } + pr_debug(PREFIX "transaction end\n"); end: if (ec->global_lock) acpi_release_global_lock(glk); -- cgit v1.2.3-18-g5258 From 6a4e2b7503d1f630bface040cf0f5a7aac1fabdb Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Fri, 8 Jan 2010 21:29:58 +0800 Subject: ACPI: Advertise to BIOS in _OSC: _OST on _PPC changes If the BIOS pokes the system-wide OSC bits to see if Linux supports evaluating _OST after a _PPC change notification, answer yes. Also, fix an oversight where we neglected to set the OSC bit advertising processor aggregator device support when acpi-pad is compiled as a module. Signed-off-by: Zhao Yakui Signed-off-by: Len Brown --- drivers/acpi/bus.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index cf761b904e4..a52126e4630 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -490,9 +490,14 @@ static void acpi_bus_osc_support(void) capbuf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE; capbuf[OSC_SUPPORT_TYPE] = OSC_SB_PR3_SUPPORT; /* _PR3 is in use */ -#ifdef CONFIG_ACPI_PROCESSOR_AGGREGATOR +#if defined(CONFIG_ACPI_PROCESSOR_AGGREGATOR) ||\ + defined(CONFIG_ACPI_PROCESSOR_AGGREGATOR_MODULE) capbuf[OSC_SUPPORT_TYPE] |= OSC_SB_PAD_SUPPORT; #endif + +#if defined(CONFIG_ACPI_PROCESSOR) || defined(CONFIG_ACPI_PROCESSOR_MODULE) + capbuf[OSC_SUPPORT_TYPE] |= OSC_SB_PPC_OST_SUPPORT; +#endif if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB", &handle))) return; if (ACPI_SUCCESS(acpi_run_osc(handle, &context))) -- cgit v1.2.3-18-g5258 From 070a24f4d238612bede515023893b18f494774c4 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Fri, 8 Jan 2010 11:12:41 -0700 Subject: ACPI: Remove unnecessary cast. The struct seq_file 'private' member is a void *, the cast is not needed. Also, remove an extra whitespace line. Signed-off-by: H Hartley Sweeten Signed-off-by: Len Brown --- drivers/acpi/processor_thermal.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c index 140c5c5b423..6deafb4aa0d 100644 --- a/drivers/acpi/processor_thermal.c +++ b/drivers/acpi/processor_thermal.c @@ -443,8 +443,7 @@ struct thermal_cooling_device_ops processor_cooling_ops = { #ifdef CONFIG_ACPI_PROCFS static int acpi_processor_limit_seq_show(struct seq_file *seq, void *offset) { - struct acpi_processor *pr = (struct acpi_processor *)seq->private; - + struct acpi_processor *pr = seq->private; if (!pr) goto end; -- cgit v1.2.3-18-g5258 From c084ca704a3661bf77690a05bc6bd2c305d87c34 Mon Sep 17 00:00:00 2001 From: Xiaotian Feng Date: Thu, 10 Dec 2009 19:56:45 +0800 Subject: ACPI: don't cond_resched if irq is disabled commit 8bd108d adds preemption point after each opcode parse, then a sleeping function called from invalid context bug was founded during suspend/resume stage. this was fixed in commit abe1dfa by don't cond_resched when irq_disabled. But recent commit 138d156 changes the behaviour to don't cond_resched when in_atomic. This makes the sleeping function called from invalid context bug happen again, which is reported in http://lkml.org/lkml/2009/12/1/371. This patch also fixes http://bugzilla.kernel.org/show_bug.cgi?id=14483 Reported-and-bisected-by: Larry Finger Reported-and-bisected-by: Justin P. Mattock Signed-off-by: Xiaotian Feng Acked-by: Alexey Starikovskiy Signed-off-by: Len Brown --- include/acpi/platform/aclinux.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/acpi/platform/aclinux.h b/include/acpi/platform/aclinux.h index 9d7febde10a..09469971472 100644 --- a/include/acpi/platform/aclinux.h +++ b/include/acpi/platform/aclinux.h @@ -152,7 +152,7 @@ static inline void *acpi_os_acquire_object(acpi_cache_t * cache) #include #define ACPI_PREEMPTION_POINT() \ do { \ - if (!in_atomic_preempt_off()) \ + if (!in_atomic_preempt_off() && !irqs_disabled()) \ cond_resched(); \ } while (0) -- cgit v1.2.3-18-g5258 From da8ba01deb98f3dc0558b1f5a37e64f40bba7904 Mon Sep 17 00:00:00 2001 From: Alan Jenkins Date: Wed, 6 Jan 2010 22:07:37 +0100 Subject: eeepc-laptop: disable cpu speed control on EeePC 701 The EeePC 4G ("701") implements CFVS, but it is not supported by the pre-installed OS, and the original option to change it in the BIOS setup screen was removed in later versions. Judging by the lack of "Super Hybrid Engine" on Asus product pages, this applies to all "701" models (4G/4G Surf/2G Surf). So Asus made a deliberate decision not to support it on this model. We have several reports that using it can cause the system to hang [1]. That said, it does not happen all the time. Some users do not experience it at all (and apparently wish to continue "right-clocking"). Check for the EeePC 701 using DMI. If met, then disable writes to the "cpufv" sysfs attribute and log an explanatory message. Add a "cpufv_disabled" attribute which allow users to override this policy. Writing to this attribute will log a second message. The sysfs attribute is more useful than a module option, because it makes it easier for userspace scripts to provide consistent behaviour (according to user configuration), regardless of whether the kernel includes this change. [1] Signed-off-by: Alan Jenkins Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 87 +++++++++++++++++++++++++++++++++++++ 1 file changed, 87 insertions(+) diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 5838c69b2fb..e954f2af572 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -35,6 +35,7 @@ #include #include #include +#include #define EEEPC_LAPTOP_VERSION "0.1" #define EEEPC_LAPTOP_NAME "Eee PC Hotkey Driver" @@ -159,6 +160,7 @@ struct eeepc_laptop { acpi_handle handle; /* the handle of the acpi device */ u32 cm_supported; /* the control methods supported by this BIOS */ + bool cpufv_disabled; u16 event_count[128]; /* count for each event */ struct platform_device *platform_device; @@ -378,6 +380,8 @@ static ssize_t store_cpufv(struct device *dev, struct eeepc_cpufv c; int rv, value; + if (eeepc->cpufv_disabled) + return -EPERM; if (get_cpufv(eeepc, &c)) return -ENODEV; rv = parse_arg(buf, count, &value); @@ -389,6 +393,41 @@ static ssize_t store_cpufv(struct device *dev, return rv; } +static ssize_t show_cpufv_disabled(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct eeepc_laptop *eeepc = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", eeepc->cpufv_disabled); +} + +static ssize_t store_cpufv_disabled(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct eeepc_laptop *eeepc = dev_get_drvdata(dev); + int rv, value; + + rv = parse_arg(buf, count, &value); + if (rv < 0) + return rv; + + switch (value) { + case 0: + if (eeepc->cpufv_disabled) + pr_warning("cpufv enabled (not officially supported " + "on this model)\n"); + eeepc->cpufv_disabled = false; + return rv; + case 1: + return -EPERM; + default: + return -EINVAL; + } +} + + static struct device_attribute dev_attr_cpufv = { .attr = { .name = "cpufv", @@ -404,12 +443,22 @@ static struct device_attribute dev_attr_available_cpufv = { .show = show_available_cpufv }; +static struct device_attribute dev_attr_cpufv_disabled = { + .attr = { + .name = "cpufv_disabled", + .mode = 0644 }, + .show = show_cpufv_disabled, + .store = store_cpufv_disabled +}; + + static struct attribute *platform_attributes[] = { &dev_attr_camera.attr, &dev_attr_cardr.attr, &dev_attr_disp.attr, &dev_attr_cpufv.attr, &dev_attr_available_cpufv.attr, + &dev_attr_cpufv_disabled.attr, NULL }; @@ -1261,6 +1310,42 @@ static void eeepc_acpi_notify(struct acpi_device *device, u32 event) } } +static void eeepc_dmi_check(struct eeepc_laptop *eeepc) +{ + const char *model; + + /* + * Blacklist for setting cpufv (cpu speed). + * + * EeePC 4G ("701") implements CFVS, but it is not supported + * by the pre-installed OS, and the original option to change it + * in the BIOS setup screen was removed in later versions. + * + * Judging by the lack of "Super Hybrid Engine" on Asus product pages, + * this applies to all "701" models (4G/4G Surf/2G Surf). + * + * So Asus made a deliberate decision not to support it on this model. + * We have several reports that using it can cause the system to hang + * + * The hang has also been reported on a "702" (Model name "8G"?). + * + * We avoid dmi_check_system() / dmi_match(), because they use + * substring matching. We don't want to affect the "701SD" + * and "701SDX" models, because they do support S.H.E. + */ + + model = dmi_get_system_info(DMI_PRODUCT_NAME); + if (!model) + return; + + if (strcmp(model, "701") == 0 || strcmp(model, "702") == 0) { + eeepc->cpufv_disabled = true; + pr_info("model %s does not officially support setting cpu " + "speed\n", model); + pr_info("cpufv disabled to avoid instability\n"); + } +} + static void cmsg_quirk(struct eeepc_laptop *eeepc, int cm, const char *name) { int dummy; @@ -1342,6 +1427,8 @@ static int __devinit eeepc_acpi_add(struct acpi_device *device) strcpy(acpi_device_class(device), EEEPC_ACPI_CLASS); device->driver_data = eeepc; + eeepc_dmi_check(eeepc); + result = eeepc_acpi_init(eeepc, device); if (result) goto fail_platform; -- cgit v1.2.3-18-g5258 From 10ae4b5663ff3092553bfbd867e7bd474ce6c553 Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Wed, 6 Jan 2010 22:07:38 +0100 Subject: eeepc-laptop: dmi blacklist to disable pci hotplug code This is a short term workaround for Eeepc 1005HA. refs: Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 25 ++++++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-) diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index e954f2af572..7fc944ac207 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -161,6 +161,7 @@ struct eeepc_laptop { u32 cm_supported; /* the control methods supported by this BIOS */ bool cpufv_disabled; + bool hotplug_disabled; u16 event_count[128]; /* count for each event */ struct platform_device *platform_device; @@ -845,6 +846,9 @@ static int eeepc_rfkill_init(struct eeepc_laptop *eeepc) if (result && result != -ENODEV) goto exit; + if (eeepc->hotplug_disabled) + return 0; + result = eeepc_setup_pci_hotplug(eeepc); /* * If we get -EBUSY then something else is handling the PCI hotplug - @@ -1314,6 +1318,10 @@ static void eeepc_dmi_check(struct eeepc_laptop *eeepc) { const char *model; + model = dmi_get_system_info(DMI_PRODUCT_NAME); + if (!model) + return; + /* * Blacklist for setting cpufv (cpu speed). * @@ -1333,17 +1341,24 @@ static void eeepc_dmi_check(struct eeepc_laptop *eeepc) * substring matching. We don't want to affect the "701SD" * and "701SDX" models, because they do support S.H.E. */ - - model = dmi_get_system_info(DMI_PRODUCT_NAME); - if (!model) - return; - if (strcmp(model, "701") == 0 || strcmp(model, "702") == 0) { eeepc->cpufv_disabled = true; pr_info("model %s does not officially support setting cpu " "speed\n", model); pr_info("cpufv disabled to avoid instability\n"); } + + /* + * Blacklist for wlan hotplug + * + * Eeepc 1005HA doesn't work like others models and don't need the + * hotplug code. In fact, current hotplug code seems to unplug another + * device... + */ + if (strcmp(model, "1005HA") == 0) { + eeepc->hotplug_disabled = true; + pr_info("wlan hotplug disabled\n"); + } } static void cmsg_quirk(struct eeepc_laptop *eeepc, int cm, const char *name) -- cgit v1.2.3-18-g5258 From 642e0447cb910ceabae0b4ea6c0cd3449d5c5abb Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 6 Jan 2010 22:07:39 +0100 Subject: eeepc-laptop: switch to using sparse keymap library Signed-off-by: Dmitry Torokhov Tested-by: Alan Jenkins Acked-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/Kconfig | 1 + drivers/platform/x86/eeepc-laptop.c | 186 ++++++++++-------------------------- 2 files changed, 52 insertions(+), 135 deletions(-) diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index db32c25e360..f526e735c5a 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -364,6 +364,7 @@ config EEEPC_LAPTOP select HWMON select LEDS_CLASS select NEW_LEDS + select INPUT_SPARSEKMAP ---help--- This driver supports the Fn-Fx keys on Eee PC laptops. diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 7fc944ac207..07d7978c558 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include @@ -121,38 +122,28 @@ static const char *cm_setv[] = { NULL, NULL, "PBPS", "TPDS" }; -struct key_entry { - char type; - u8 code; - u16 keycode; -}; - -enum { KE_KEY, KE_END }; - static const struct key_entry eeepc_keymap[] = { - /* Sleep already handled via generic ACPI code */ - {KE_KEY, 0x10, KEY_WLAN }, - {KE_KEY, 0x11, KEY_WLAN }, - {KE_KEY, 0x12, KEY_PROG1 }, - {KE_KEY, 0x13, KEY_MUTE }, - {KE_KEY, 0x14, KEY_VOLUMEDOWN }, - {KE_KEY, 0x15, KEY_VOLUMEUP }, - {KE_KEY, 0x16, KEY_DISPLAY_OFF }, - {KE_KEY, 0x1a, KEY_COFFEE }, - {KE_KEY, 0x1b, KEY_ZOOM }, - {KE_KEY, 0x1c, KEY_PROG2 }, - {KE_KEY, 0x1d, KEY_PROG3 }, - {KE_KEY, NOTIFY_BRN_MIN, KEY_BRIGHTNESSDOWN }, - {KE_KEY, NOTIFY_BRN_MAX, KEY_BRIGHTNESSUP }, - {KE_KEY, 0x30, KEY_SWITCHVIDEOMODE }, - {KE_KEY, 0x31, KEY_SWITCHVIDEOMODE }, - {KE_KEY, 0x32, KEY_SWITCHVIDEOMODE }, - {KE_KEY, 0x37, KEY_F13 }, /* Disable Touchpad */ - {KE_KEY, 0x38, KEY_F14 }, - {KE_END, 0}, + { KE_KEY, 0x10, { KEY_WLAN } }, + { KE_KEY, 0x11, { KEY_WLAN } }, + { KE_KEY, 0x12, { KEY_PROG1 } }, + { KE_KEY, 0x13, { KEY_MUTE } }, + { KE_KEY, 0x14, { KEY_VOLUMEDOWN } }, + { KE_KEY, 0x15, { KEY_VOLUMEUP } }, + { KE_KEY, 0x16, { KEY_DISPLAY_OFF } }, + { KE_KEY, 0x1a, { KEY_COFFEE } }, + { KE_KEY, 0x1b, { KEY_ZOOM } }, + { KE_KEY, 0x1c, { KEY_PROG2 } }, + { KE_KEY, 0x1d, { KEY_PROG3 } }, + { KE_KEY, NOTIFY_BRN_MIN, { KEY_BRIGHTNESSDOWN } }, + { KE_KEY, NOTIFY_BRN_MAX, { KEY_BRIGHTNESSUP } }, + { KE_KEY, 0x30, { KEY_SWITCHVIDEOMODE } }, + { KE_KEY, 0x31, { KEY_SWITCHVIDEOMODE } }, + { KE_KEY, 0x32, { KEY_SWITCHVIDEOMODE } }, + { KE_KEY, 0x37, { KEY_F13 } }, /* Disable Touchpad */ + { KE_KEY, 0x38, { KEY_F14 } }, + { KE_END, 0 }, }; - /* * This is the main structure, we can use it to store useful information */ @@ -1143,120 +1134,42 @@ static void eeepc_backlight_exit(struct eeepc_laptop *eeepc) /* * Input device (i.e. hotkeys) */ -static struct key_entry *eeepc_get_entry_by_scancode( - struct eeepc_laptop *eeepc, - int code) +static int eeepc_input_init(struct eeepc_laptop *eeepc) { - struct key_entry *key; - - for (key = eeepc->keymap; key->type != KE_END; key++) - if (code == key->code) - return key; + struct input_dev *input; + int error; - return NULL; -} - -static void eeepc_input_notify(struct eeepc_laptop *eeepc, int event) -{ - static struct key_entry *key; - - key = eeepc_get_entry_by_scancode(eeepc, event); - if (key) { - switch (key->type) { - case KE_KEY: - input_report_key(eeepc->inputdev, key->keycode, - 1); - input_sync(eeepc->inputdev); - input_report_key(eeepc->inputdev, key->keycode, - 0); - input_sync(eeepc->inputdev); - break; - } + input = input_allocate_device(); + if (!input) { + pr_info("Unable to allocate input device\n"); + return -ENOMEM; } -} - -static struct key_entry *eeepc_get_entry_by_keycode( - struct eeepc_laptop *eeepc, int code) -{ - struct key_entry *key; - - for (key = eeepc->keymap; key->type != KE_END; key++) - if (code == key->keycode && key->type == KE_KEY) - return key; - return NULL; -} + input->name = "Asus EeePC extra buttons"; + input->phys = EEEPC_LAPTOP_FILE "/input0"; + input->id.bustype = BUS_HOST; + input->dev.parent = &eeepc->platform_device->dev; -static int eeepc_getkeycode(struct input_dev *dev, int scancode, int *keycode) -{ - struct eeepc_laptop *eeepc = input_get_drvdata(dev); - struct key_entry *key = eeepc_get_entry_by_scancode(eeepc, scancode); - - if (key && key->type == KE_KEY) { - *keycode = key->keycode; - return 0; + error = sparse_keymap_setup(input, eeepc_keymap, NULL); + if (error) { + pr_err("Unable to setup input device keymap\n"); + goto err_free_dev; } - return -EINVAL; -} - -static int eeepc_setkeycode(struct input_dev *dev, int scancode, int keycode) -{ - struct eeepc_laptop *eeepc = input_get_drvdata(dev); - struct key_entry *key; - int old_keycode; - - if (keycode < 0 || keycode > KEY_MAX) - return -EINVAL; - - key = eeepc_get_entry_by_scancode(eeepc, scancode); - if (key && key->type == KE_KEY) { - old_keycode = key->keycode; - key->keycode = keycode; - set_bit(keycode, dev->keybit); - if (!eeepc_get_entry_by_keycode(eeepc, old_keycode)) - clear_bit(old_keycode, dev->keybit); - return 0; + error = input_register_device(input); + if (error) { + pr_err("Unable to register input device\n"); + goto err_free_keymap; } - return -EINVAL; -} - -static int eeepc_input_init(struct eeepc_laptop *eeepc) -{ - const struct key_entry *key; - int result; - - eeepc->inputdev = input_allocate_device(); - if (!eeepc->inputdev) { - pr_info("Unable to allocate input device\n"); - return -ENOMEM; - } - eeepc->inputdev->name = "Asus EeePC extra buttons"; - eeepc->inputdev->dev.parent = &eeepc->platform_device->dev; - eeepc->inputdev->phys = EEEPC_LAPTOP_FILE "/input0"; - eeepc->inputdev->id.bustype = BUS_HOST; - eeepc->inputdev->getkeycode = eeepc_getkeycode; - eeepc->inputdev->setkeycode = eeepc_setkeycode; - input_set_drvdata(eeepc->inputdev, eeepc); - - eeepc->keymap = kmemdup(eeepc_keymap, sizeof(eeepc_keymap), - GFP_KERNEL); - for (key = eeepc_keymap; key->type != KE_END; key++) { - switch (key->type) { - case KE_KEY: - set_bit(EV_KEY, eeepc->inputdev->evbit); - set_bit(key->keycode, eeepc->inputdev->keybit); - break; - } - } - result = input_register_device(eeepc->inputdev); - if (result) { - pr_info("Unable to register input device\n"); - input_free_device(eeepc->inputdev); - return result; - } + eeepc->inputdev = input; return 0; + + err_free_keymap: + sparse_keymap_free(input); + err_free_dev: + input_free_device(input); + return error; } static void eeepc_input_exit(struct eeepc_laptop *eeepc) @@ -1306,11 +1219,12 @@ static void eeepc_acpi_notify(struct acpi_device *device, u32 event) * event will be desired value (or else ignored) */ } - eeepc_input_notify(eeepc, event); + sparse_keymap_report_event(eeepc->inputdev, event, + 1, true); } } else { /* Everything else is a bona-fide keypress event */ - eeepc_input_notify(eeepc, event); + sparse_keymap_report_event(eeepc->inputdev, event, 1, true); } } @@ -1554,10 +1468,12 @@ static int __init eeepc_laptop_init(void) result = acpi_bus_register_driver(&eeepc_acpi_driver); if (result < 0) goto fail_acpi_driver; + if (!eeepc_device_present) { result = -ENODEV; goto fail_no_device; } + return 0; fail_no_device: -- cgit v1.2.3-18-g5258 From 322a1356be96bcc4b97e8e370f6468c821330077 Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Wed, 6 Jan 2010 22:07:40 +0100 Subject: eeepc-laptop: add hotplug_disable parameter Some new models need to disable wireless hotplug. For the moment, we don't know excactly what models need that, except 1005HA. Users will be able to use that param as a workaround. Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 07d7978c558..a959abdea3a 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -50,6 +50,14 @@ MODULE_AUTHOR("Corentin Chary, Eric Cooper"); MODULE_DESCRIPTION(EEEPC_LAPTOP_NAME); MODULE_LICENSE("GPL"); +static bool hotplug_disabled; + +module_param(hotplug_disabled, bool, 0644); +MODULE_PARM_DESC(hotplug_disabled, + "Disable hotplug for wireless device. " + "If your laptop need that, please report to " + "acpi4asus-user@lists.sourceforge.net."); + /* * Definitions for Asus EeePC */ @@ -1356,6 +1364,8 @@ static int __devinit eeepc_acpi_add(struct acpi_device *device) strcpy(acpi_device_class(device), EEEPC_ACPI_CLASS); device->driver_data = eeepc; + eeepc->hotplug_disabled = hotplug_disabled; + eeepc_dmi_check(eeepc); result = eeepc_acpi_init(eeepc, device); -- cgit v1.2.3-18-g5258 From 4194e2f551a6308e6ab34ac88210bf54858aa7df Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Wed, 6 Jan 2010 22:07:41 +0100 Subject: eeepc-laptop: disable wireless hotplug for 1201N Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index a959abdea3a..e2be6bb33d9 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -1277,7 +1277,7 @@ static void eeepc_dmi_check(struct eeepc_laptop *eeepc) * hotplug code. In fact, current hotplug code seems to unplug another * device... */ - if (strcmp(model, "1005HA") == 0) { + if (strcmp(model, "1005HA") == 0 || strcmp(model, "1201N") == 0) { eeepc->hotplug_disabled = true; pr_info("wlan hotplug disabled\n"); } -- cgit v1.2.3-18-g5258 From 7a0b73a49ab56fb1e836675c00d6d0d2ba39a714 Mon Sep 17 00:00:00 2001 From: "Luck, Tony" Date: Mon, 28 Dec 2009 10:39:23 -0800 Subject: ACPI: Fix section mismatch error for acpi_early_processor_set_pdc() Alex Chiang introduced acpi_early_processor_set_pdc() in commit: ACPI: processor: call _PDC early 78f1699659963fff97975df44db6d5dbe7218e55 But this results in a section mismatch: WARNING: drivers/acpi/acpi.o(.text+0xa9c1): Section mismatch in reference from the function acpi_early_processor_set_pdc() to the variable .cpuinit.data:processor_idle_dmi_table The function acpi_early_processor_set_pdc() references the variable __cpuinitdata processor_idle_dmi_table. This is often because acpi_early_processor_set_pdc lacks a __cpuinitdata annotation or the annotation of processor_idle_dmi_table is wrong. The only caller of acpi_early_processor_set_pdc() is acpi_bus_init() which is an "__init" function. So the correct fix here is to mark acpi_early_processor_set_pdc() "__init" too. Signed-off-by: Tony Luck Acked-by: Alex Chiang Signed-off-by: Len Brown --- drivers/acpi/processor_pdc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/processor_pdc.c b/drivers/acpi/processor_pdc.c index 30e4dc0cdf3..7d4ee394d0b 100644 --- a/drivers/acpi/processor_pdc.c +++ b/drivers/acpi/processor_pdc.c @@ -151,7 +151,7 @@ early_init_pdc(acpi_handle handle, u32 lvl, void *context, void **rv) return AE_OK; } -void acpi_early_processor_set_pdc(void) +void __init acpi_early_processor_set_pdc(void) { /* * Check whether the system is DMI table. If yes, OSPM -- cgit v1.2.3-18-g5258 From c14973f93027500301fc40333e16ae49e58923a7 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Sun, 10 Jan 2010 00:15:44 -0800 Subject: sony-laptop - fix using of uninitialized variable CC [M] drivers/platform/x86/sony-laptop.o drivers/platform/x86/sony-laptop.c: In function 'sony_nc_rfkill_setup': drivers/platform/x86/sony-laptop.c:1162: warning: 'i' may be used uninitialized in this function Signed-off-by: Dmitry Torokhov Acked-by: Mattia Dongili Signed-off-by: Len Brown --- drivers/platform/x86/sony-laptop.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index 5af53340da6..3f71a605a49 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -1201,9 +1201,12 @@ static void sony_nc_rfkill_setup(struct acpi_device *device) /* the buffer is filled with magic numbers describing the devices * available, 0xff terminates the enumeration */ - while ((dev_code = *(device_enum->buffer.pointer + i)) != 0xff && - i < device_enum->buffer.length) { - i++; + for (i = 0; i < device_enum->buffer.length; i++) { + + dev_code = *(device_enum->buffer.pointer + i); + if (dev_code == 0xff) + break; + dprintk("Radio devices, looking at 0x%.2x\n", dev_code); if (dev_code == 0 && !sony_rfkill_devices[SONY_WIFI]) -- cgit v1.2.3-18-g5258 From c97adf9e7bebf17a86b95e2131bf9ba76c4857c7 Mon Sep 17 00:00:00 2001 From: Márton Németh Date: Sun, 10 Jan 2010 17:15:36 +0100 Subject: acpi: make ACPI device id constant MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The ids field of the struct acpi_driver is constant in so it is worth to make the initialization data also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // Signed-off-by: Márton Németh Cc: Julia Lawall Cc: cocci@diku.dk Signed-off-by: Len Brown --- drivers/acpi/pci_link.c | 2 +- drivers/acpi/pci_root.c | 2 +- drivers/acpi/power.c | 2 +- drivers/acpi/power_meter.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c index 394ae89409c..04b0f007c9b 100644 --- a/drivers/acpi/pci_link.c +++ b/drivers/acpi/pci_link.c @@ -56,7 +56,7 @@ ACPI_MODULE_NAME("pci_link"); static int acpi_pci_link_add(struct acpi_device *device); static int acpi_pci_link_remove(struct acpi_device *device, int type); -static struct acpi_device_id link_device_ids[] = { +static const struct acpi_device_id link_device_ids[] = { {"PNP0C0F", 0}, {"", 0}, }; diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index 101cce3681d..64f55b6db73 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -46,7 +46,7 @@ static int acpi_pci_root_add(struct acpi_device *device); static int acpi_pci_root_remove(struct acpi_device *device, int type); static int acpi_pci_root_start(struct acpi_device *device); -static struct acpi_device_id root_device_ids[] = { +static const struct acpi_device_id root_device_ids[] = { {"PNP0A03", 0}, {"", 0}, }; diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index 22b29791651..0f30c3c1eea 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -65,7 +65,7 @@ static int acpi_power_remove(struct acpi_device *device, int type); static int acpi_power_resume(struct acpi_device *device); static int acpi_power_open_fs(struct inode *inode, struct file *file); -static struct acpi_device_id power_device_ids[] = { +static const struct acpi_device_id power_device_ids[] = { {ACPI_POWER_HID, 0}, {"", 0}, }; diff --git a/drivers/acpi/power_meter.c b/drivers/acpi/power_meter.c index 2ef7030a0c2..ca75c36f754 100644 --- a/drivers/acpi/power_meter.c +++ b/drivers/acpi/power_meter.c @@ -64,7 +64,7 @@ static int can_cap_in_hardware(void) return force_cap_on || cap_in_hardware; } -static struct acpi_device_id power_meter_ids[] = { +static const struct acpi_device_id power_meter_ids[] = { {"ACPI000D", 0}, {"", 0}, }; -- cgit v1.2.3-18-g5258 From c19bdb6126a5e1f43b4a4fc3c4b09c926667e5ef Mon Sep 17 00:00:00 2001 From: Rakib Mullick Date: Sun, 3 Jan 2010 19:27:56 +0600 Subject: ACPI: Fix unused variable warning in sbs.c When CONFIG_ACPI_SYSFS_POWER=n and CONFIG_ACPI_PROCFS_POWER=n, then we're warned by the following warning: drivers/acpi/sbs.c: In function `acpi_battery_remove': drivers/acpi/sbs.c:825: warning: unused variable `battery' Signed-off-by: Rakib Mullick Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/sbs.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c index 52b9db8afc2..b16ddbf23a9 100644 --- a/drivers/acpi/sbs.c +++ b/drivers/acpi/sbs.c @@ -822,7 +822,10 @@ static int acpi_battery_add(struct acpi_sbs *sbs, int id) static void acpi_battery_remove(struct acpi_sbs *sbs, int id) { +#if defined(CONFIG_ACPI_SYSFS_POWER) || defined(CONFIG_ACPI_PROCFS_POWER) struct acpi_battery *battery = &sbs->battery[id]; +#endif + #ifdef CONFIG_ACPI_SYSFS_POWER if (battery->bat.dev) { if (battery->have_sysfs_alarm) -- cgit v1.2.3-18-g5258 From 2205cbe8ecaf5f3ab911cef839c94d05ea5b0c76 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Tue, 19 Jan 2010 16:55:41 -0700 Subject: ACPI: processor: restrict early _PDC to opt-in platforms Commit 78f1699 (ACPI: processor: call _PDC early) blindly walks the namespace and calls _PDC on every processor object it finds. This change may cause issues on platforms that declare dummy values for SSDTs on non-present processors (disabled in MADT). When we call _PDC and dynamically attempt to execute the AML Load() op on these dummy SSDTs, there's no telling what might happen. Rather than finding every platform that has bogus SSDTs, restrict early _PDC calls to platforms that are known to need early evaluation of _PDC. This is a minimal, temporary fix (given the context of the current release cycle). A real solution of checking the MADT for non-present processors will be written for the next merge window. References: http://bugzilla.kernel.org/show_bug.cgi?id=14710 http://bugzilla.kernel.org/show_bug.cgi?id=14954 Signed-off-by: Alex Chiang Signed-off-by: Len Brown --- drivers/acpi/processor_pdc.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/drivers/acpi/processor_pdc.c b/drivers/acpi/processor_pdc.c index 30e4dc0cdf3..f3364371207 100644 --- a/drivers/acpi/processor_pdc.c +++ b/drivers/acpi/processor_pdc.c @@ -144,6 +144,29 @@ void acpi_processor_set_pdc(acpi_handle handle) } EXPORT_SYMBOL_GPL(acpi_processor_set_pdc); +static int early_pdc_optin; +static int set_early_pdc_optin(const struct dmi_system_id *id) +{ + early_pdc_optin = 1; + return 0; +} + +static struct dmi_system_id __cpuinitdata early_pdc_optin_table[] = { + { + set_early_pdc_optin, "HP Envy", { + DMI_MATCH(DMI_BIOS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Envy") }, NULL}, + { + set_early_pdc_optin, "HP Pavilion dv6", { + DMI_MATCH(DMI_BIOS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv6") }, NULL}, + { + set_early_pdc_optin, "HP Pavilion dv7", { + DMI_MATCH(DMI_BIOS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv7") }, NULL}, + {}, +}; + static acpi_status early_init_pdc(acpi_handle handle, u32 lvl, void *context, void **rv) { @@ -159,6 +182,13 @@ void acpi_early_processor_set_pdc(void) */ dmi_check_system(processor_idle_dmi_table); + /* + * Allow systems to opt-in to early _PDC evaluation. + */ + dmi_check_system(early_pdc_optin_table); + if (!early_pdc_optin) + return; + acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX, early_init_pdc, NULL, NULL, NULL); -- cgit v1.2.3-18-g5258 From 7f07a605a3929d2d94dcbad8ccb7d280958d21f9 Mon Sep 17 00:00:00 2001 From: Darren Jenkins Date: Tue, 12 Jan 2010 23:37:07 +1100 Subject: ACPI: power_meter: remove double kfree() resource->domain_devices can be double kfree()'d in a couple of places. Fix this by setting num_domain_devices = 0 after the kfree(). Coverity CID: 13356, 13355, 13354 Signed-off-by: Darren Jenkins Acked-by: Darrick J. Wong Signed-off-by: Len Brown --- drivers/acpi/power_meter.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/power_meter.c b/drivers/acpi/power_meter.c index ca75c36f754..dc4ffadf812 100644 --- a/drivers/acpi/power_meter.c +++ b/drivers/acpi/power_meter.c @@ -534,6 +534,7 @@ static void remove_domain_devices(struct acpi_power_meter_resource *resource) kfree(resource->domain_devices); kobject_put(resource->holders_dir); + resource->num_domain_devices = 0; } static int read_domain_devices(struct acpi_power_meter_resource *resource) @@ -740,7 +741,6 @@ skip_unsafe_cap: return res; error: - remove_domain_devices(resource); remove_attrs(resource); return res; } -- cgit v1.2.3-18-g5258 From 5d76b6f6c17572e662f5c99c2023adae92100855 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 19 Jan 2010 22:41:14 -0500 Subject: ACPI: enable C2 and Turbo-mode on Nehalem notebooks on A/C Linux has always ignored ACPI BIOS C2 with exit latency > 100 usec, and the ACPI spec is clear that is correct FADT-supplied C2. However, the ACPI spec explicitly states that _CST-supplied C-states have no latency limits. So move the 100usec C2 test out of the code shared by FADT and _CST code-paths, and into the FADT-specific path. This bug has not been visible until Nehalem, which advertises a CPU-C2 worst case exit latency on servers of 205usec. That (incorrect) figure is being used by BIOS writers on mobile Nehalem systems for the AC configuration. Thus, Linux ignores C2 leaving just C1, which is saves less power, and also impacts performance by preventing the use of turbo mode. http://bugzilla.kernel.org/show_bug.cgi?id=15064 Tested-by: Alex Chiang Signed-off-by: Len Brown --- drivers/acpi/processor_idle.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index d1676b1754d..8f6da9acc8e 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -305,6 +305,17 @@ static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr) pr->power.states[ACPI_STATE_C2].latency = acpi_gbl_FADT.C2latency; pr->power.states[ACPI_STATE_C3].latency = acpi_gbl_FADT.C3latency; + /* + * FADT specified C2 latency must be less than or equal to + * 100 microseconds. + */ + if (acpi_gbl_FADT.C2latency > ACPI_PROCESSOR_MAX_C2_LATENCY) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "C2 latency too large [%d]\n", acpi_gbl_FADT.C2latency)); + /* invalidate C2 */ + pr->power.states[ACPI_STATE_C2].address = 0; + } + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "lvl2[0x%08x] lvl3[0x%08x]\n", pr->power.states[ACPI_STATE_C2].address, @@ -500,16 +511,6 @@ static void acpi_processor_power_verify_c2(struct acpi_processor_cx *cx) if (!cx->address) return; - /* - * C2 latency must be less than or equal to 100 - * microseconds. - */ - else if (cx->latency > ACPI_PROCESSOR_MAX_C2_LATENCY) { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "latency too large [%d]\n", cx->latency)); - return; - } - /* * Otherwise we've met all of our C2 requirements. * Normalize the C2 latency to expidite policy -- cgit v1.2.3-18-g5258 From a6d72c189f6c4292ba1a323e8af24083790529f8 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 19 Jan 2010 23:10:04 -0500 Subject: ACPI: allow C3 > 1000usec Do for C3 what the previous patch did for C2. The C2 patch was in response to a highly visible and multiply reported C-state/turbo failure, while this change has no bug report in-hand. This will enable C3 in Linux on systems where BIOS overstates C3 latency in _CST. It will also enable future systems which may actually have C3 > 1000usec. Linux has always ignored ACPI BIOS C3 with exit latency > 1000 usec, and the ACPI spec is clear that is correct FADT-supplied C3. However, the ACPI spec explicitly states that _CST-supplied C-states have no latency limits. So move the 1000usec C3 test out of the code shared by FADT and _CST code-paths, and into the FADT-specific path. Signed-off-by: Len Brown --- drivers/acpi/processor_idle.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 8f6da9acc8e..2c543b42eb1 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -316,6 +316,17 @@ static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr) pr->power.states[ACPI_STATE_C2].address = 0; } + /* + * FADT supplied C3 latency must be less than or equal to + * 1000 microseconds. + */ + if (acpi_gbl_FADT.C3latency > ACPI_PROCESSOR_MAX_C3_LATENCY) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "C3 latency too large [%d]\n", acpi_gbl_FADT.C3latency)); + /* invalidate C3 */ + pr->power.states[ACPI_STATE_C3].address = 0; + } + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "lvl2[0x%08x] lvl3[0x%08x]\n", pr->power.states[ACPI_STATE_C2].address, @@ -532,16 +543,6 @@ static void acpi_processor_power_verify_c3(struct acpi_processor *pr, if (!cx->address) return; - /* - * C3 latency must be less than or equal to 1000 - * microseconds. - */ - else if (cx->latency > ACPI_PROCESSOR_MAX_C3_LATENCY) { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "latency too large [%d]\n", cx->latency)); - return; - } - /* * PIIX4 Erratum #18: We don't support C3 when Type-F (fast) * DMA transfers are used by any ISA device to avoid livelock. -- cgit v1.2.3-18-g5258 From d22edd293ff3f1e2d252f164fe2cf744620cb660 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 19 Jan 2010 23:29:09 -0500 Subject: ACPI: delete acpi_processor_power_verify_c2() no functional change -- cleanup only. acpi_processor_power_verify_c2() was nearly empty due to a previous patch, so expand its remains into its one caller and delete it. Signed-off-by: Len Brown --- drivers/acpi/processor_idle.c | 22 ++++------------------ 1 file changed, 4 insertions(+), 18 deletions(-) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 2c543b42eb1..7c0441f63b3 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -516,23 +516,6 @@ static int acpi_processor_get_power_info_cst(struct acpi_processor *pr) return status; } -static void acpi_processor_power_verify_c2(struct acpi_processor_cx *cx) -{ - - if (!cx->address) - return; - - /* - * Otherwise we've met all of our C2 requirements. - * Normalize the C2 latency to expidite policy - */ - cx->valid = 1; - - cx->latency_ticks = cx->latency; - - return; -} - static void acpi_processor_power_verify_c3(struct acpi_processor *pr, struct acpi_processor_cx *cx) { @@ -631,7 +614,10 @@ static int acpi_processor_power_verify(struct acpi_processor *pr) break; case ACPI_STATE_C2: - acpi_processor_power_verify_c2(cx); + if (!cx->address) + break; + cx->valid = 1; + cx->latency_ticks = cx->latency; /* Normalize latency */ break; case ACPI_STATE_C3: -- cgit v1.2.3-18-g5258