From a804644a1a31a0b85e4c7d3c49f30419513cb6c1 Mon Sep 17 00:00:00 2001 From: Mike Ditto Date: Tue, 16 Dec 2008 20:17:09 +0000 Subject: i2c-cpm: Detect and report NAK right away instead of timing out Make the driver report an ENXIO error immediately upon NAK instead of waiting for another interrupt and getting a timeout. When reading from a device that is not present or declines to respond to, e.g., a non-existent register address, CPM immediately reports a NAK condition in the TxBD, but the driver kept waiting until a timeout, which takes 1 second and causes an ugly console error message. Signed-off-by: Mike Ditto Acked-by: Jochen Friedrich [ben-linux@fluff.org: reordered description text] Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-cpm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c index 228f7572306..3fcf78e906d 100644 --- a/drivers/i2c/busses/i2c-cpm.c +++ b/drivers/i2c/busses/i2c-cpm.c @@ -365,6 +365,7 @@ static int cpm_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) pmsg = &msgs[tptr]; if (pmsg->flags & I2C_M_RD) ret = wait_event_interruptible_timeout(cpm->i2c_wait, + (in_be16(&tbdf[tptr].cbd_sc) & BD_SC_NAK) || !(in_be16(&rbdf[rptr].cbd_sc) & BD_SC_EMPTY), 1 * HZ); else -- cgit v1.2.3-18-g5258 From be44f01e8af3862767f466f89c12640a2f2b0038 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 31 Oct 2008 16:10:22 +0000 Subject: i2c-s3c2410: fix check for being in suspend. As noted by Julia Lawall , we can never trigger the check for being in suspend due to the result of !readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN always being 0. Add suspend/resume hooks to stop i2c transactions happening until the driver has been resumed. Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-s3c2410.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 1fac4e23313..b7434d24904 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -56,6 +56,7 @@ enum s3c24xx_i2c_state { struct s3c24xx_i2c { spinlock_t lock; wait_queue_head_t wait; + unsigned int suspended:1; struct i2c_msg *msg; unsigned int msg_num; @@ -507,7 +508,7 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int unsigned long timeout; int ret; - if (!(readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN)) + if (i2c->suspended) return -EIO; ret = s3c24xx_i2c_set_master(i2c); @@ -986,17 +987,26 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev) } #ifdef CONFIG_PM +static int s3c24xx_i2c_suspend_late(struct platform_device *dev, + pm_message_t msg) +{ + struct s3c24xx_i2c *i2c = platform_get_drvdata(dev); + i2c->suspended = 1; + return 0; +} + static int s3c24xx_i2c_resume(struct platform_device *dev) { struct s3c24xx_i2c *i2c = platform_get_drvdata(dev); - if (i2c != NULL) - s3c24xx_i2c_init(i2c); + i2c->suspended = 0; + s3c24xx_i2c_init(i2c); return 0; } #else +#define s3c24xx_i2c_suspend_late NULL #define s3c24xx_i2c_resume NULL #endif @@ -1005,6 +1015,7 @@ static int s3c24xx_i2c_resume(struct platform_device *dev) static struct platform_driver s3c2410_i2c_driver = { .probe = s3c24xx_i2c_probe, .remove = s3c24xx_i2c_remove, + .suspend_late = s3c24xx_i2c_suspend_late, .resume = s3c24xx_i2c_resume, .driver = { .owner = THIS_MODULE, @@ -1015,6 +1026,7 @@ static struct platform_driver s3c2410_i2c_driver = { static struct platform_driver s3c2440_i2c_driver = { .probe = s3c24xx_i2c_probe, .remove = s3c24xx_i2c_remove, + .suspend_late = s3c24xx_i2c_suspend_late, .resume = s3c24xx_i2c_resume, .driver = { .owner = THIS_MODULE, -- cgit v1.2.3-18-g5258 From 83099bc647688d816c2f7fac8e51921bdfe8db73 Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Fri, 5 Dec 2008 09:14:10 +0800 Subject: ocfs2: Always update xattr search when creating bucket. When we create xattr bucket during the process of xattr set, we always need to update the ocfs2_xattr_search since even if the bucket size is the same as block size, the offset will change because of the removal of the ocfs2_xattr_block header. Signed-off-by: Tao Ma Signed-off-by: Mark Fasheh --- fs/ocfs2/xattr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index 054e2efb0b7..74d7367ade1 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -2645,9 +2645,9 @@ static int ocfs2_xattr_update_xattr_search(struct inode *inode, return ret; } - i = xs->here - old_xh->xh_entries; - xs->here = &xs->header->xh_entries[i]; } + i = xs->here - old_xh->xh_entries; + xs->here = &xs->header->xh_entries[i]; } return ret; -- cgit v1.2.3-18-g5258 From a97721894a6dc0f9ebfe1dbaa4bb112eaf399273 Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Tue, 16 Dec 2008 18:10:18 -0800 Subject: ocfs2: Add JBD2 compat feature bit. Define the OCFS2_FEATURE_COMPAT_JBD2 bit in the filesystem header. Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/ocfs2_fs.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h index 5f180cf7abb..5e0c0d0aef7 100644 --- a/fs/ocfs2/ocfs2_fs.h +++ b/fs/ocfs2/ocfs2_fs.h @@ -86,7 +86,8 @@ #define OCFS2_CLEAR_INCOMPAT_FEATURE(sb,mask) \ OCFS2_SB(sb)->s_feature_incompat &= ~(mask) -#define OCFS2_FEATURE_COMPAT_SUPP OCFS2_FEATURE_COMPAT_BACKUP_SB +#define OCFS2_FEATURE_COMPAT_SUPP (OCFS2_FEATURE_COMPAT_BACKUP_SB \ + | OCFS2_FEATURE_COMPAT_JBD2_SB) #define OCFS2_FEATURE_INCOMPAT_SUPP (OCFS2_FEATURE_INCOMPAT_LOCAL_MOUNT \ | OCFS2_FEATURE_INCOMPAT_SPARSE_ALLOC \ | OCFS2_FEATURE_INCOMPAT_INLINE_DATA \ @@ -152,6 +153,11 @@ */ #define OCFS2_FEATURE_COMPAT_BACKUP_SB 0x0001 +/* + * The filesystem will correctly handle journal feature bits. + */ +#define OCFS2_FEATURE_COMPAT_JBD2_SB 0x0002 + /* * Unwritten extents support. */ -- cgit v1.2.3-18-g5258 From 28707af01b8912e701e3c5b619ff8f6dde8f2e81 Mon Sep 17 00:00:00 2001 From: Dave Liu Date: Wed, 17 Dec 2008 18:24:15 +0800 Subject: powerpc/fsl-booke: Fix the miss interrupt restore The commit e5e774d8833de1a0037be2384efccadf16935675 powerpc/fsl-booke: Fix problem with _tlbil_va being interrupted introduce one issue. that casue the problem like this: Kernel BUG at c00b19fc [verbose debug info unavailable] Oops: Exception in kernel mode, sig: 5 [#1] MPC8572 DS Modules linked in: NIP: c00b19fc LR: c00b1c34 CTR: c0064e88 REGS: ef02b7b0 TRAP: 0700 Not tainted (2.6.28-rc8-00057-g1bda712) MSR: 00021000 CR: 44048028 XER: 20000000 TASK = ef02c000[1] 'init' THREAD: ef02a000 GPR00: 00000001 ef02b860 ef02c000 eec201a0 c0dec2c0 00000000 000078a1 00000400 GPR08: c00b4e40 000078a1 c048ec00 a1780000 44048028 ecd26917 00000001 ef02b948 GPR16: ffffffea 0000020c 00000000 00000000 00000003 0000000a 00000000 000078a1 GPR24: eec201a0 00000000 ed849000 00000400 ef02b95c 00000001 ef02b978 ef02b984 NIP [c00b19fc] __find_get_block+0x24/0x238 LR [c00b1c34] __getblk+0x24/0x2a0 Call Trace: [ef02b860] [c017b768] generic_make_request+0x290/0x328 (unreliable) [ef02b8b0] [c00b1c34] __getblk+0x24/0x2a0 [ef02b910] [c00b4ae4] __bread+0x14/0xf8 [ef02b920] [c00fc228] ext2_get_branch+0xf0/0x138 [ef02b940] [c00fcc88] ext2_get_block+0xb8/0x828 [ef02ba00] [c00bbdc8] do_mpage_readpage+0x188/0x808 [ef02bac0] [c00bc5b4] mpage_readpages+0xec/0x144 [ef02bb50] [c00fba38] ext2_readpages+0x24/0x34 [ef02bb60] [c006ade0] __do_page_cache_readahead+0x150/0x230 [ef02bbb0] [c0064bdc] filemap_fault+0x31c/0x3e0 [ef02bbf0] [c00728b8] __do_fault+0x60/0x5b0 [ef02bc50] [c0011e0c] do_page_fault+0x2d8/0x4c4 [ef02bd10] [c000ed90] handle_page_fault+0xc/0x80 [ef02bdd0] [c00c7adc] set_brk+0x74/0x9c [ef02bdf0] [c00c9274] load_elf_binary+0x70c/0x1180 [ef02be70] [c00945f0] search_binary_handler+0xa8/0x274 [ef02bea0] [c0095818] do_execve+0x19c/0x1d4 [ef02bed0] [c000766c] sys_execve+0x58/0x84 [ef02bef0] [c000e950] ret_from_syscall+0x0/0x3c [ef02bfb0] [c009c6fc] sys_dup+0x24/0x6c [ef02bfc0] [c0001e04] init_post+0xb0/0xf0 [ef02bfd0] [c046c1ac] kernel_init+0xcc/0xf4 [ef02bff0] [c000e6d0] kernel_thread+0x4c/0x68 Instruction dump: 4bffffa4 813f000c 4bffffac 9421ffb0 7c0802a6 7d800026 90010054 bf210034 91810030 7c0000a6 68008000 54008ffe <0f000000> 3d20c04e 3b29ffb8 38000008 The issue was the beqlr returns early but we haven't reenabled interrupts. Signed-off-by: Dave Liu Signed-off-by: Kumar Gala --- arch/powerpc/kernel/misc_32.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index d108715129e..5c33bc14bd9 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -486,13 +486,13 @@ _GLOBAL(_tlbil_va) tlbsx 0,r3 mfspr r4,SPRN_MAS1 /* check valid */ andis. r3,r4,MAS1_VALID@h - beqlr + beq 1f rlwinm r4,r4,0,1,31 mtspr SPRN_MAS1,r4 tlbwe msync isync - wrtee r10 +1: wrtee r10 blr #endif /* CONFIG_FSL_BOOKE */ -- cgit v1.2.3-18-g5258 From af4d3643864ee5fcba0c97d77a424fa0b0346f8e Mon Sep 17 00:00:00 2001 From: Guillaume Knispel Date: Tue, 9 Dec 2008 15:28:34 +0100 Subject: powerpc: Fix corruption error in rh_alloc_fixed() There is an error in rh_alloc_fixed() of the Remote Heap code: If there is at least one free block blk won't be NULL at the end of the search loop, so -ENOMEM won't be returned and the else branch of "if (bs == s || be == e)" will be taken, corrupting the management structures. Signed-off-by: Guillaume Knispel Acked-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/lib/rheap.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/lib/rheap.c b/arch/powerpc/lib/rheap.c index 29b2941cada..45907c1dae6 100644 --- a/arch/powerpc/lib/rheap.c +++ b/arch/powerpc/lib/rheap.c @@ -556,6 +556,7 @@ unsigned long rh_alloc_fixed(rh_info_t * info, unsigned long start, int size, co be = blk->start + blk->size; if (s >= bs && e <= be) break; + blk = NULL; } if (blk == NULL) -- cgit v1.2.3-18-g5258 From 5413aa467806578bf5f78a83893cb9426b815231 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 3 Dec 2008 16:33:09 -0800 Subject: USB: fix problem with usbtmc driver not loading properly The usbtmc driver forgot to export its device table to userspace. Without this, it is never loaded properly when such a device is seen by the system. Cc: Marcel Janssen Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/usbtmc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index 8e74657f106..43a863c5cc4 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -51,6 +51,7 @@ static struct usb_device_id usbtmc_devices[] = { { USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 0), }, { 0, } /* terminating entry */ }; +MODULE_DEVICE_TABLE(usb, usbtmc_devices); /* * This structure is the capabilities for the device -- cgit v1.2.3-18-g5258 From 1393fce7189427bdb4d6115ca5566ca8d0fc86f3 Mon Sep 17 00:00:00 2001 From: CSÉCSY László Date: Tue, 9 Dec 2008 23:39:14 +0100 Subject: USB: storage: unusual_devs.h: Nokia 3109c addition MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit 2.6.26(.x, cannot remember) could handle the microSD card in my Nokia 3109c attached via USB as mass storage, 2.6.27(.x, up to and included 2.6.27.8) cannot. Please find the attached patch which fixes this regression, and a copy of /proc/bus/usb/devices with my phone plugged in running with this patch on Frugalware. T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0421 ProdID=0063 Rev= 6.01 S: Manufacturer=Nokia S: Product=Nokia 3109c S: SerialNumber=359561013742570 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms From: CSÉCSY László Cc: Phil Dibowitz Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index e61f2bfc64a..6573156f72a 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -167,6 +167,13 @@ UNUSUAL_DEV( 0x0421, 0x005d, 0x0001, 0x0600, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* Reported by CSECSY Laszlo */ +UNUSUAL_DEV( 0x0421, 0x0063, 0x0001, 0x0601, + "Nokia", + "Nokia 3109c", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + /* Patch for Nokia 5310 capacity */ UNUSUAL_DEV( 0x0421, 0x006a, 0x0000, 0x0591, "Nokia", -- cgit v1.2.3-18-g5258 From 48e1a540e1e9ea62a2b3088a69ecf934f3172b14 Mon Sep 17 00:00:00 2001 From: Ozan Sener Date: Mon, 8 Dec 2008 19:15:45 +0200 Subject: USB: Unusual devs patch for Nokia 3500c T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0421 ProdID=0060 Rev= 5.51 S: Manufacturer=Nokia S: Product=Nokia 3500c S: SerialNumber=357687010280751 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms From: Ozan Sener Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 6573156f72a..06bf064c439 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -167,6 +167,13 @@ UNUSUAL_DEV( 0x0421, 0x005d, 0x0001, 0x0600, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* Reported by Ozan Sener */ +UNUSUAL_DEV( 0x0421, 0x0060, 0x0551, 0x0551, + "Nokia", + "3500c", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + /* Reported by CSECSY Laszlo */ UNUSUAL_DEV( 0x0421, 0x0063, 0x0001, 0x0601, "Nokia", -- cgit v1.2.3-18-g5258 From a4b188095912eee83d065f000dfe06f25919750b Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 1 Dec 2008 10:23:43 -0500 Subject: usb-storage: update unusual_devs entry for Nokia 5310 This patch (as1179) updates the unusual_devs entry for Nokia's 5310 phone to include a more recent firmware revision. This fixes Bugzilla #12099. Signed-off-by: Alan Stern Tested-by: Robson Roberto Souza Peixoto Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 06bf064c439..bfcc1fe8251 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -182,7 +182,7 @@ UNUSUAL_DEV( 0x0421, 0x0063, 0x0001, 0x0601, US_FL_FIX_CAPACITY ), /* Patch for Nokia 5310 capacity */ -UNUSUAL_DEV( 0x0421, 0x006a, 0x0000, 0x0591, +UNUSUAL_DEV( 0x0421, 0x006a, 0x0000, 0x0701, "Nokia", "5310", US_SC_DEVICE, US_PR_DEVICE, NULL, -- cgit v1.2.3-18-g5258 From f2ee695554d9b4d163361a63f196ad7d8d0fe935 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sat, 6 Dec 2008 23:46:04 -0800 Subject: USB: tty: SprogII DCC controller identifiers Someone on rmweb reminded me this had been overlooked from ages ago.. Add the identifiers for the Sprog II USB. This is a DCC control interface using the FTDI-SIO hardware: http://www.sprog-dcc.co.uk/. People have been using it with insmod options for ages, this just puts it into the driver data. Signed-off-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio.h | 3 +++ 2 files changed, 4 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index aad1359a3eb..abbc2d8350a 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -166,6 +166,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_SPROG_II) }, { USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) }, { USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) }, { USB_DEVICE(FTDI_VID, FTDI_XF_547_PID) }, diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 07a3992abad..70703b706b0 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -75,6 +75,9 @@ /* OpenDCC (www.opendcc.de) product id */ #define FTDI_OPENDCC_PID 0xBFD8 +/* Sprog II (Andrew Crosland's SprogII DCC interface) */ +#define FTDI_SPROG_II 0xF0C8 + /* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */ /* they use the ftdi chipset for the USB interface and the vendor id is the same */ #define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */ -- cgit v1.2.3-18-g5258 From 01ba0856e9352e3c4e1c7d8c0a2a7defb456a5f9 Mon Sep 17 00:00:00 2001 From: Andrew Ewert Date: Thu, 4 Dec 2008 09:09:59 -0600 Subject: USB: ftdi_sio: Adding Ewert Energy System's CANdapter PID The following patch adds in the USB PID for Ewert Energy System's CANdapter device (CANBUS to USB-Serial which uses the FTDI 245R chipset) to the ftdi_sio device driver. The patch was tested successfully on Linux kernel 2.6.27 under Ubuntu. Relevant output from /proc/bus/usb/devices (With patch installed): T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0403 ProdID=9f80 Rev= 6.00 S: Manufacturer=Ewert Energy Systems S: Product=CANdapter S: SerialNumber=A6RGB3Z3 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 90mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms Signed-off-by: Andrew Ewert Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio.h | 3 +++ 2 files changed, 4 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index abbc2d8350a..fb6f2933b01 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -143,6 +143,7 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = { static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) }, diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 70703b706b0..373ee09975b 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -40,6 +40,9 @@ /* AlphaMicro Components AMC-232USB01 device */ #define FTDI_AMC232_PID 0xFF00 /* Product Id */ +/* www.candapter.com Ewert Energy Systems CANdapter device */ +#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */ + /* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */ /* the VID is the standard ftdi vid (FTDI_VID) */ #define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */ -- cgit v1.2.3-18-g5258 From 7c12414955e9b44a3e33d54e578bf008caa4475d Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 24 Nov 2008 23:11:03 -0800 Subject: USB: gadget: fix rndis working at high speed Fix a bug specific to highspeed mode in the recently updated RNDIS support: it wasn't setting up the high speed notification endpoint, which prevented high speed RNDIS links from working. Signed-off-by: David Brownell Tested-by: Anand Gadiyar Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/f_rndis.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c index 428b5993575..3a8bb53fc47 100644 --- a/drivers/usb/gadget/f_rndis.c +++ b/drivers/usb/gadget/f_rndis.c @@ -651,6 +651,8 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f) fs_in_desc.bEndpointAddress; hs_out_desc.bEndpointAddress = fs_out_desc.bEndpointAddress; + hs_notify_desc.bEndpointAddress = + fs_notify_desc.bEndpointAddress; /* copy descriptors, and track endpoint copies */ f->hs_descriptors = usb_copy_descriptors(eth_hs_function); @@ -662,6 +664,8 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f) f->hs_descriptors, &hs_in_desc); rndis->hs.out = usb_find_endpoint(eth_hs_function, f->hs_descriptors, &hs_out_desc); + rndis->hs.notify = usb_find_endpoint(eth_hs_function, + f->hs_descriptors, &hs_notify_desc); } rndis->port.open = rndis_open; -- cgit v1.2.3-18-g5258 From aacf4a0135a330e68df412a6797a9b9689d8d9a3 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Thu, 4 Dec 2008 16:17:00 -0700 Subject: usbmon: drop bogus 0t from usbmon.txt The example is incorrect: there is no 0t socket (the '1t' format has no bus number in it). Also, correct the broken sentence for USB Tag. Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman --- Documentation/usb/usbmon.txt | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/Documentation/usb/usbmon.txt b/Documentation/usb/usbmon.txt index 2917ce4ffdc..270481906dc 100644 --- a/Documentation/usb/usbmon.txt +++ b/Documentation/usb/usbmon.txt @@ -34,11 +34,12 @@ if usbmon is built into the kernel. Verify that bus sockets are present. # ls /sys/kernel/debug/usbmon -0s 0t 0u 1s 1t 1u 2s 2t 2u 3s 3t 3u 4s 4t 4u +0s 0u 1s 1t 1u 2s 2t 2u 3s 3t 3u 4s 4t 4u # -Now you can choose to either use the sockets numbered '0' (to capture packets on -all buses), and skip to step #3, or find the bus used by your device with step #2. +Now you can choose to either use the socket '0u' (to capture packets on all +buses), and skip to step #3, or find the bus used by your device with step #2. +This allows to filter away annoying devices that talk continuously. 2. Find which bus connects to the desired device @@ -99,8 +100,9 @@ on the event type, but there is a set of words, common for all types. Here is the list of words, from left to right: -- URB Tag. This is used to identify URBs is normally a kernel mode address - of the URB structure in hexadecimal. +- URB Tag. This is used to identify URBs, and is normally an in-kernel address + of the URB structure in hexadecimal, but can be a sequence number or any + other unique string, within reason. - Timestamp in microseconds, a decimal number. The timestamp's resolution depends on available clock, and so it can be much worse than a microsecond -- cgit v1.2.3-18-g5258 From c33ba392147a8506b1b43899fdea6069e27e4277 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Thu, 4 Dec 2008 16:30:53 +0100 Subject: USB: Documentation/usb/gadget_serial.txt: update to match driver use_acm behaviour Commit 7bb5ea54 (usb gadget serial: use composite gadget framework) changed the default for the use_acm parameter from 0 to 1. Update the documentation to match. Signed-off-by: Peter Korsgaard Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- Documentation/usb/gadget_serial.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/usb/gadget_serial.txt b/Documentation/usb/gadget_serial.txt index 9b22bd14c34..eac7df94d8e 100644 --- a/Documentation/usb/gadget_serial.txt +++ b/Documentation/usb/gadget_serial.txt @@ -114,11 +114,11 @@ modules. Then you must load the gadget serial driver. To load it as an ACM device (recommended for interoperability), do this: - modprobe g_serial use_acm=1 + modprobe g_serial To load it as a vendor specific bulk in/out device, do this: - modprobe g_serial + modprobe g_serial use_acm=0 This will also automatically load the underlying gadget peripheral controller driver. This must be done each time you reboot the gadget -- cgit v1.2.3-18-g5258 From 9a9fafb89433c5fd1331bac0c84c4b321e358b42 Mon Sep 17 00:00:00 2001 From: Phil Endecott Date: Mon, 1 Dec 2008 10:22:33 -0500 Subject: USB: fix comment about endianness of descriptors This patch fixes a comment and clarifies the documentation about the endianness of descriptors. The current policy is that descriptors will be little-endian at the API even on big-endian systems; however the /proc/bus/usb API predates this policy and presents descriptors with some multibyte fields byte-swapped. Signed-off-by: Phil Endecott Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- Documentation/usb/proc_usb_info.txt | 6 ++++-- include/linux/usb/ch9.h | 8 ++++++-- 2 files changed, 10 insertions(+), 4 deletions(-) diff --git a/Documentation/usb/proc_usb_info.txt b/Documentation/usb/proc_usb_info.txt index 077e9032d0c..fafcd472326 100644 --- a/Documentation/usb/proc_usb_info.txt +++ b/Documentation/usb/proc_usb_info.txt @@ -49,8 +49,10 @@ it and 002/048 sometime later. These files can be read as binary data. The binary data consists of first the device descriptor, then the descriptors for each -configuration of the device. That information is also shown in -text form by the /proc/bus/usb/devices file, described later. +configuration of the device. Multi-byte fields in the device and +configuration descriptors, but not other descriptors, are converted +to host endianness by the kernel. This information is also shown +in text form by the /proc/bus/usb/devices file, described later. These files may also be used to write user-level drivers for the USB devices. You would open the /proc/bus/usb/BBB/DDD file read/write, diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index 73a2f4eb1f7..9b42baed390 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -158,8 +158,12 @@ struct usb_ctrlrequest { * (rarely) accepted by SET_DESCRIPTOR. * * Note that all multi-byte values here are encoded in little endian - * byte order "on the wire". But when exposed through Linux-USB APIs, - * they've been converted to cpu byte order. + * byte order "on the wire". Within the kernel and when exposed + * through the Linux-USB APIs, they are not converted to cpu byte + * order; it is the responsibility of the client code to do this. + * The single exception is when device and configuration descriptors (but + * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD); + * in this case the fields are converted to host endianness by the kernel. */ /* -- cgit v1.2.3-18-g5258 From 24c0996a6b73e2554104961afcc8659534503e0d Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 1 Dec 2008 10:24:41 -0500 Subject: USB: skip Set-Interface(0) if already in altsetting 0 When a driver unbinds from an interface, usbcore always sends a Set-Interface request to reinstall altsetting 0. Unforunately, quite a few devices have buggy firmware that crashes when it receives this request. To avoid such problems, this patch (as1180) arranges to send the Set-Interface request only when the interface is not already in altsetting 0. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/driver.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 3d7793d9303..8c081308b0e 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -279,7 +279,9 @@ static int usb_unbind_interface(struct device *dev) * altsetting means creating new endpoint device entries). * When either of these happens, defer the Set-Interface. */ - if (!error && intf->dev.power.status == DPM_ON) + if (intf->cur_altsetting->desc.bAlternateSetting == 0) + ; /* Already in altsetting 0 so skip Set-Interface */ + else if (!error && intf->dev.power.status == DPM_ON) usb_set_interface(udev, intf->altsetting[0]. desc.bInterfaceNumber, 0); else -- cgit v1.2.3-18-g5258 From 7c99200142c04d0f1ed3f048014591f841efdaed Mon Sep 17 00:00:00 2001 From: Matthew Arnold Date: Sat, 13 Dec 2008 22:42:53 +1100 Subject: USB: add 5372:2303 to pl2303 This patch adds the "Superial" USB-Serial converter to pl2303 so that it is detected, by the correct driver. Adds the relevant vendor:product (5372:2303) to the device tables in pl2303.c & pl2303.h. The patch has been tested against 2.6.24-22-generic. Signed-off-by: Matthew D Arnold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/pl2303.c | 1 + drivers/usb/serial/pl2303.h | 4 ++++ 2 files changed, 5 insertions(+) diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 491c8857b64..029b314a1fb 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -91,6 +91,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) }, { USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) }, { USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) }, + { USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index a3bd039c78e..05c909aca8e 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -110,3 +110,7 @@ /* Y.C. Cable U.S.A., Inc - USB to RS-232 */ #define YCCABLE_VENDOR_ID 0x05ad #define YCCABLE_PRODUCT_ID 0x0fba + +/* "Superial" USB - Serial */ +#define SUPERIAL_VENDOR_ID 0x5372 +#define SUPERIAL_PRODUCT_ID 0x2303 -- cgit v1.2.3-18-g5258 From 413ba6fb51fa8dc77be09552e506d00f31234e0d Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Tue, 16 Dec 2008 12:25:55 +0100 Subject: USB: set correct configuration in probe of ti_usb_3410_5052 This driver transfers firmware. It may just as well set the correct configuration. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ti_usb_3410_5052.c | 55 ++--------------------------------- 1 file changed, 3 insertions(+), 52 deletions(-) diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 31c42d1cae1..01d0c70d60e 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -16,56 +16,6 @@ * For questions or problems with this driver, contact Texas Instruments * technical support, or Al Borchers , or * Peter Berger . - * - * This driver needs this hotplug script in /etc/hotplug/usb/ti_usb_3410_5052 - * or in /etc/hotplug.d/usb/ti_usb_3410_5052.hotplug to set the device - * configuration. - * - * #!/bin/bash - * - * BOOT_CONFIG=1 - * ACTIVE_CONFIG=2 - * - * if [[ "$ACTION" != "add" ]] - * then - * exit - * fi - * - * CONFIG_PATH=/sys${DEVPATH%/?*}/bConfigurationValue - * - * if [[ 0`cat $CONFIG_PATH` -ne $BOOT_CONFIG ]] - * then - * exit - * fi - * - * PRODUCT=${PRODUCT%/?*} # delete version - * VENDOR_ID=`printf "%d" 0x${PRODUCT%/?*}` - * PRODUCT_ID=`printf "%d" 0x${PRODUCT#*?/}` - * - * PARAM_PATH=/sys/module/ti_usb_3410_5052/parameters - * - * function scan() { - * s=$1 - * shift - * for i - * do - * if [[ $s -eq $i ]] - * then - * return 0 - * fi - * done - * return 1 - * } - * - * IFS=$IFS, - * - * if (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_3410` && - * scan $PRODUCT_ID 13328 `cat $PARAM_PATH/product_3410`) || - * (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_5052` && - * scan $PRODUCT_ID 20562 20818 20570 20575 `cat $PARAM_PATH/product_5052`) - * then - * echo $ACTIVE_CONFIG > $CONFIG_PATH - * fi */ #include @@ -457,9 +407,10 @@ static int ti_startup(struct usb_serial *serial) goto free_tdev; } - /* the second configuration must be set (in sysfs by hotplug script) */ + /* the second configuration must be set */ if (dev->actconfig->desc.bConfigurationValue == TI_BOOT_CONFIG) { - status = -ENODEV; + status = usb_driver_set_configuration(dev, TI_ACTIVE_CONFIG); + status = status ? status : -ENODEV; goto free_tdev; } -- cgit v1.2.3-18-g5258 From af4b8514aafd53d97b05a0a30b7d4cfd2cbb7b81 Mon Sep 17 00:00:00 2001 From: Mike Provencher Date: Tue, 16 Dec 2008 14:30:14 -0600 Subject: USB: pl2303: add id for Hewlett-Packard LD220-HP POS pole display Add id for the Hewlett-Packard LD220-HP POS pole display. Bus 002 Device 002: ID 03f0:3524 Hewlett-Packard Signed-off-by: Mike Provencher Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/pl2303.c | 1 + drivers/usb/serial/pl2303.h | 4 ++++ 2 files changed, 5 insertions(+) diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 029b314a1fb..1aed584be5e 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -92,6 +92,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) }, { USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) }, { USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index 05c909aca8e..54974f446a8 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -114,3 +114,7 @@ /* "Superial" USB - Serial */ #define SUPERIAL_VENDOR_ID 0x5372 #define SUPERIAL_PRODUCT_ID 0x2303 + +/* Hewlett-Packard LD220-HP POS Pole Display */ +#define HP_VENDOR_ID 0x03f0 +#define HP_LD220_PRODUCT_ID 0x3524 -- cgit v1.2.3-18-g5258 From 1c93ca09863a544cec24fc8e33491f645df80e59 Mon Sep 17 00:00:00 2001 From: Johann Felix Soden Date: Thu, 30 Oct 2008 22:44:39 +0100 Subject: driver core: fix using 'ret' variable in unregister_dynamic_debug_module The 'ret' variable is assigned, but not used in the return statement. Fix this. Signed-off-by: Johann Felix Soden Acked-by: Jason Baron Signed-off-by: Greg Kroah-Hartman --- lib/dynamic_printk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/dynamic_printk.c b/lib/dynamic_printk.c index d83660fd6fd..d0fd0e4ed9a 100644 --- a/lib/dynamic_printk.c +++ b/lib/dynamic_printk.c @@ -135,7 +135,7 @@ int unregister_dynamic_debug_module(char *mod_name) nr_entries--; out: up(&debug_list_mutex); - return 0; + return ret; } EXPORT_SYMBOL_GPL(unregister_dynamic_debug_module); -- cgit v1.2.3-18-g5258 From 09a35ce00fa6bbb8bd130a828807e237488aa7ea Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Sat, 6 Dec 2008 21:10:51 -0800 Subject: xilinx_hwicap: remove improper wording in license statement GPLv2 doesn't allow additional restrictions to be imposed on any code, so this wording needs to be removed from these files. Signed-off-by: Stephen Neuendorffer Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/char/xilinx_hwicap/buffer_icap.c | 3 --- drivers/char/xilinx_hwicap/buffer_icap.h | 3 --- drivers/char/xilinx_hwicap/fifo_icap.c | 3 --- drivers/char/xilinx_hwicap/fifo_icap.h | 3 --- drivers/char/xilinx_hwicap/xilinx_hwicap.c | 3 --- drivers/char/xilinx_hwicap/xilinx_hwicap.h | 3 --- 6 files changed, 18 deletions(-) diff --git a/drivers/char/xilinx_hwicap/buffer_icap.c b/drivers/char/xilinx_hwicap/buffer_icap.c index aa7f7962a9a..05d897764f0 100644 --- a/drivers/char/xilinx_hwicap/buffer_icap.c +++ b/drivers/char/xilinx_hwicap/buffer_icap.c @@ -21,9 +21,6 @@ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE. * - * Xilinx products are not intended for use in life support appliances, - * devices, or systems. Use in such applications is expressly prohibited. - * * (c) Copyright 2003-2008 Xilinx Inc. * All rights reserved. * diff --git a/drivers/char/xilinx_hwicap/buffer_icap.h b/drivers/char/xilinx_hwicap/buffer_icap.h index 8b0252bf06e..d4f419ee87a 100644 --- a/drivers/char/xilinx_hwicap/buffer_icap.h +++ b/drivers/char/xilinx_hwicap/buffer_icap.h @@ -21,9 +21,6 @@ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE. * - * Xilinx products are not intended for use in life support appliances, - * devices, or systems. Use in such applications is expressly prohibited. - * * (c) Copyright 2003-2008 Xilinx Inc. * All rights reserved. * diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c index 776b5052847..02225eb19cf 100644 --- a/drivers/char/xilinx_hwicap/fifo_icap.c +++ b/drivers/char/xilinx_hwicap/fifo_icap.c @@ -21,9 +21,6 @@ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE. * - * Xilinx products are not intended for use in life support appliances, - * devices, or systems. Use in such applications is expressly prohibited. - * * (c) Copyright 2007-2008 Xilinx Inc. * All rights reserved. * diff --git a/drivers/char/xilinx_hwicap/fifo_icap.h b/drivers/char/xilinx_hwicap/fifo_icap.h index 62bda453c90..4c9dd9a3b62 100644 --- a/drivers/char/xilinx_hwicap/fifo_icap.h +++ b/drivers/char/xilinx_hwicap/fifo_icap.h @@ -21,9 +21,6 @@ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE. * - * Xilinx products are not intended for use in life support appliances, - * devices, or systems. Use in such applications is expressly prohibited. - * * (c) Copyright 2007-2008 Xilinx Inc. * All rights reserved. * diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c index d1613194909..f40ab699860 100644 --- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c +++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c @@ -21,9 +21,6 @@ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE. * - * Xilinx products are not intended for use in life support appliances, - * devices, or systems. Use in such applications is expressly prohibited. - * * (c) Copyright 2002 Xilinx Inc., Systems Engineering Group * (c) Copyright 2004 Xilinx Inc., Systems Engineering Group * (c) Copyright 2007-2008 Xilinx Inc. diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.h b/drivers/char/xilinx_hwicap/xilinx_hwicap.h index 24d0d9b938f..8cca11981c5 100644 --- a/drivers/char/xilinx_hwicap/xilinx_hwicap.h +++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.h @@ -21,9 +21,6 @@ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE. * - * Xilinx products are not intended for use in life support appliances, - * devices, or systems. Use in such applications is expressly prohibited. - * * (c) Copyright 2003-2007 Xilinx Inc. * All rights reserved. * -- cgit v1.2.3-18-g5258 From aa6f3c640781c8ac213a4ed3011dcced36f899e3 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Sun, 30 Nov 2008 14:01:26 +0100 Subject: driver core: add newlines to debugging enabled/disabled messages Both messages are missing the newline and thus dmesg output gets scrambled. Signed-off-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman --- lib/dynamic_printk.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/lib/dynamic_printk.c b/lib/dynamic_printk.c index d0fd0e4ed9a..8e30295e856 100644 --- a/lib/dynamic_printk.c +++ b/lib/dynamic_printk.c @@ -289,7 +289,7 @@ static ssize_t pr_debug_write(struct file *file, const char __user *buf, dynamic_enabled = DYNAMIC_ENABLED_SOME; err = 0; printk(KERN_DEBUG - "debugging enabled for module %s", + "debugging enabled for module %s\n", elem->name); } else if (!value && (elem->enable == 1)) { elem->enable = 0; @@ -309,7 +309,7 @@ static ssize_t pr_debug_write(struct file *file, const char __user *buf, err = 0; printk(KERN_DEBUG "debugging disabled for module " - "%s", elem->name); + "%s\n", elem->name); } } } -- cgit v1.2.3-18-g5258 From 4b4cdf3979c32fa3d042d150f49449c74d048553 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Fri, 28 Nov 2008 00:01:28 +0300 Subject: STAGING: Move staging drivers back to staging-specific menu Signed-off-by: Dmitry Baryshkov Signed-off-by: Greg Kroah-Hartman --- drivers/staging/Kconfig | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index c95b286a123..5d457c96bd7 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -22,6 +22,8 @@ menuconfig STAGING If in doubt, say N here. +if STAGING + config STAGING_EXCLUDE_BUILD bool "Exclude Staging drivers from being built" if STAGING default y @@ -62,3 +64,4 @@ source "drivers/staging/at76_usb/Kconfig" source "drivers/staging/poch/Kconfig" endif # !STAGING_EXCLUDE_BUILD +endif # STAGING -- cgit v1.2.3-18-g5258 From 331c31351044888916805c9cb32d8bb9e40c12e9 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Wed, 17 Dec 2008 06:31:53 -0500 Subject: cifs: fix buffer overrun in parse_DFS_referrals While testing a kernel with memory poisoning enabled, I saw some warnings about the redzone getting clobbered when chasing DFS referrals. The buffer allocation for the unicode converted version of the searchName is too small and needs to take null termination into account. Signed-off-by: Jeff Layton Acked-by: Steve French Signed-off-by: Linus Torvalds --- fs/cifs/cifssmb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 2af8626ced4..6d51696dc76 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -3983,7 +3983,8 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr, node->flags = le16_to_cpu(pSMBr->DFSFlags); if (is_unicode) { - __le16 *tmp = kmalloc(strlen(searchName)*2, GFP_KERNEL); + __le16 *tmp = kmalloc(strlen(searchName)*2 + 2, + GFP_KERNEL); cifsConvertToUCS((__le16 *) tmp, searchName, PATH_MAX, nls_codepage, remap); node->path_consumed = hostlen_fromUCS(tmp, -- cgit v1.2.3-18-g5258