From aff6d851000018701d7f16c9e69a2f4eabbf5a04 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 6 Nov 2007 14:12:33 -0800 Subject: sky2: fix power settings on Yukon XL patch ff35164e72648e0bf0b10ec4410c195e8607e88b in mainline. Make sure PCI register for PHY power gets set correctly. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- drivers/net/sky2.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index d292aefc39a..257507793a3 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -603,21 +603,22 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) static void sky2_phy_power(struct sky2_hw *hw, unsigned port, int onoff) { u32 reg1; - static const u32 phy_power[] - = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD }; - - /* looks like this XL is back asswards .. */ - if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) - onoff = !onoff; + static const u32 phy_power[] = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD }; + static const u32 coma_mode[] = { PCI_Y2_PHY1_COMA, PCI_Y2_PHY2_COMA }; sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); reg1 = sky2_pci_read32(hw, PCI_DEV_REG1); + if (onoff) /* Turn off phy power saving */ reg1 &= ~phy_power[port]; else reg1 |= phy_power[port]; + if (onoff && hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) + reg1 |= coma_mode[port]; + + sky2_pci_write32(hw, PCI_DEV_REG1, reg1); sky2_pci_read32(hw, PCI_DEV_REG1); sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); -- cgit v1.2.3-18-g5258