From af97bace2cca58ee7c94bf4d31e820f29688d7a5 Mon Sep 17 00:00:00 2001 From: Alessandro Rubini Date: Mon, 11 Jun 2012 22:56:26 +0200 Subject: i2c-nomadik: move header to The header and driver are only used by arm/mach-u8500 (and potentially arm/mach-nomadik), but the STA2X11 I/O Hub exports on PCIe a number of devices, including i2c-nomadik. This patch allows compilation of the driver under x86. Signed-off-by: Alessandro Rubini Acked-by: Giancarlo Asnaghi Tested-by: Linus Walleij Signed-off-by: Wolfram Sang --- arch/arm/mach-ux500/board-mop500.c | 2 +- arch/arm/mach-ux500/devices-common.h | 2 +- arch/arm/plat-nomadik/include/plat/i2c.h | 39 ------------------------------- drivers/i2c/busses/i2c-nomadik.c | 3 +-- include/linux/platform_data/i2c-nomadik.h | 39 +++++++++++++++++++++++++++++++ 5 files changed, 42 insertions(+), 43 deletions(-) delete mode 100644 arch/arm/plat-nomadik/include/plat/i2c.h create mode 100644 include/linux/platform_data/i2c-nomadik.h diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 1509a3cb583..f9a964836d3 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -39,7 +40,6 @@ #include #include -#include #include #include diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h index 6e470656026..23cf734b538 100644 --- a/arch/arm/mach-ux500/devices-common.h +++ b/arch/arm/mach-ux500/devices-common.h @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include struct spi_master_cntlr; diff --git a/arch/arm/plat-nomadik/include/plat/i2c.h b/arch/arm/plat-nomadik/include/plat/i2c.h deleted file mode 100644 index 8ba70ffc31e..00000000000 --- a/arch/arm/plat-nomadik/include/plat/i2c.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2, as - * published by the Free Software Foundation. - */ -#ifndef __PLAT_I2C_H -#define __PLAT_I2C_H - -enum i2c_freq_mode { - I2C_FREQ_MODE_STANDARD, /* up to 100 Kb/s */ - I2C_FREQ_MODE_FAST, /* up to 400 Kb/s */ - I2C_FREQ_MODE_HIGH_SPEED, /* up to 3.4 Mb/s */ - I2C_FREQ_MODE_FAST_PLUS, /* up to 1 Mb/s */ -}; - -/** - * struct nmk_i2c_controller - client specific controller configuration - * @clk_freq: clock frequency for the operation mode - * @slsu: Slave data setup time in ns. - * The needed setup time for three modes of operation - * are 250ns, 100ns and 10ns respectively thus leading - * to the values of 14, 6, 2 for a 48 MHz i2c clk - * @tft: Tx FIFO Threshold in bytes - * @rft: Rx FIFO Threshold in bytes - * @timeout Slave response timeout(ms) - * @sm: speed mode - */ -struct nmk_i2c_controller { - unsigned long clk_freq; - unsigned short slsu; - unsigned char tft; - unsigned char rft; - int timeout; - enum i2c_freq_mode sm; -}; - -#endif /* __PLAT_I2C_H */ diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c index 5267ab93d55..752f1fda371 100644 --- a/drivers/i2c/busses/i2c-nomadik.c +++ b/drivers/i2c/busses/i2c-nomadik.c @@ -23,8 +23,7 @@ #include #include #include - -#include +#include #define DRIVER_NAME "nmk-i2c" diff --git a/include/linux/platform_data/i2c-nomadik.h b/include/linux/platform_data/i2c-nomadik.h new file mode 100644 index 00000000000..c2303c3e480 --- /dev/null +++ b/include/linux/platform_data/i2c-nomadik.h @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2009 ST-Ericsson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + */ +#ifndef __PDATA_I2C_NOMADIK_H +#define __PDATA_I2C_NOMADIK_H + +enum i2c_freq_mode { + I2C_FREQ_MODE_STANDARD, /* up to 100 Kb/s */ + I2C_FREQ_MODE_FAST, /* up to 400 Kb/s */ + I2C_FREQ_MODE_HIGH_SPEED, /* up to 3.4 Mb/s */ + I2C_FREQ_MODE_FAST_PLUS, /* up to 1 Mb/s */ +}; + +/** + * struct nmk_i2c_controller - client specific controller configuration + * @clk_freq: clock frequency for the operation mode + * @slsu: Slave data setup time in ns. + * The needed setup time for three modes of operation + * are 250ns, 100ns and 10ns respectively thus leading + * to the values of 14, 6, 2 for a 48 MHz i2c clk + * @tft: Tx FIFO Threshold in bytes + * @rft: Rx FIFO Threshold in bytes + * @timeout Slave response timeout(ms) + * @sm: speed mode + */ +struct nmk_i2c_controller { + unsigned long clk_freq; + unsigned short slsu; + unsigned char tft; + unsigned char rft; + int timeout; + enum i2c_freq_mode sm; +}; + +#endif /* __PDATA_I2C_NOMADIK_H */ -- cgit v1.2.3-18-g5258