From 993af7c048f414121bc81e0d6e69456e3862a06b Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sat, 18 Sep 2010 13:13:28 +0800 Subject: Regulator: lp3972 cleanup This patch includes below fixes based on Mark's comment. - Return actual error if i2c_smbus_read_byte_data() fail - Add spaces around bitwise AND operator(&) to improve readability - Add comment to explain why we need to update voltage change control register for LDO1 and LDO5 - Logging the value for diagnostics if chip reported incorrect voltage value - Add __devinit annotation for setup_regulators() - Show system control register1 value if the value is mismatched - Logging the value for diagnostics if failed to detect device Signed-off-by: Axel Lin Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/lp3972.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) diff --git a/drivers/regulator/lp3972.c b/drivers/regulator/lp3972.c index 0d9b47569c1..e07062fd0b4 100644 --- a/drivers/regulator/lp3972.c +++ b/drivers/regulator/lp3972.c @@ -192,7 +192,7 @@ static int lp3972_i2c_read(struct i2c_client *i2c, char reg, int count, return -EIO; ret = i2c_smbus_read_byte_data(i2c, reg); if (ret < 0) - return -EIO; + return ret; *dest = ret; return 0; @@ -215,7 +215,7 @@ static u8 lp3972_reg_read(struct lp3972 *lp3972, u8 reg) lp3972_i2c_read(lp3972->i2c, reg, 1, &val); dev_dbg(lp3972->dev, "reg read 0x%02x -> 0x%02x\n", (int)reg, - (unsigned)val&0xff); + (unsigned)val & 0xff); mutex_unlock(&lp3972->io_lock); @@ -234,7 +234,7 @@ static int lp3972_set_bits(struct lp3972 *lp3972, u8 reg, u16 mask, u16 val) if (ret == 0) { ret = lp3972_i2c_write(lp3972->i2c, reg, 1, &tmp); dev_dbg(lp3972->dev, "reg write 0x%02x -> 0x%02x\n", (int)reg, - (unsigned)val&0xff); + (unsigned)val & 0xff); } mutex_unlock(&lp3972->io_lock); @@ -320,6 +320,13 @@ static int lp3972_ldo_set_voltage(struct regulator_dev *dev, if (ret) return ret; + /* + * LDO1 and LDO5 support voltage control by either target voltage1 + * or target voltage2 register. + * We use target voltage1 register for LDO1 and LDO5 in this driver. + * We need to update voltage change control register(0x20) to enable + * LDO1 and LDO5 to change to their programmed target values. + */ switch (ldo) { case LP3972_LDO1: case LP3972_LDO5: @@ -401,7 +408,8 @@ static int lp3972_dcdc_get_voltage(struct regulator_dev *dev) val = 1000 * buck_voltage_map[buck][reg]; else { val = 0; - dev_warn(&dev->dev, "chip reported incorrect voltage value.\n"); + dev_warn(&dev->dev, "chip reported incorrect voltage value." + " reg = %d\n", reg); } return val; @@ -523,7 +531,7 @@ static struct regulator_desc regulators[] = { }, }; -static int setup_regulators(struct lp3972 *lp3972, +static int __devinit setup_regulators(struct lp3972 *lp3972, struct lp3972_platform_data *pdata) { int i, err; @@ -584,10 +592,13 @@ static int __devinit lp3972_i2c_probe(struct i2c_client *i2c, /* Detect LP3972 */ ret = lp3972_i2c_read(i2c, LP3972_SYS_CONTROL1_REG, 1, &val); - if (ret == 0 && (val & SYS_CONTROL1_INIT_MASK) != SYS_CONTROL1_INIT_VAL) + if (ret == 0 && + (val & SYS_CONTROL1_INIT_MASK) != SYS_CONTROL1_INIT_VAL) { ret = -ENODEV; + dev_err(&i2c->dev, "chip reported: val = 0x%x\n", val); + } if (ret < 0) { - dev_err(&i2c->dev, "failed to detect device\n"); + dev_err(&i2c->dev, "failed to detect device. ret = %d\n", ret); goto err_detect; } -- cgit v1.2.3-18-g5258