From 33b7107f59a61236d94ecd6b45e20283cd5abcc8 Mon Sep 17 00:00:00 2001 From: Christian Riesch Date: Mon, 24 Mar 2014 13:46:26 +0100 Subject: net: davinci_emac: Replace devm_request_irq with request_irq In commit 6892b41d9701283085b655c6086fb57a5d63fa47 Author: Lad, Prabhakar Date: Tue Jun 25 21:24:51 2013 +0530 net: davinci: emac: Convert to devm_* api the call of request_irq is replaced by devm_request_irq and the call of free_irq is removed. But since interrupts are requested in emac_dev_open, doing ifconfig up/down on the board requests the interrupts again each time, causing devm_request_irq to fail. The interface is dead until the device is rebooted. This patch reverts said commit partially: It changes the driver back to use request_irq instead of devm_request_irq, puts free_irq back in place, but keeps the remaining changes of the original patch. Reported-by: Jon Ringle Signed-off-by: Christian Riesch Cc: Lad, Prabhakar Cc: Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/davinci_emac.c | 25 +++++++++++++++++++++---- 1 file changed, 21 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c index cd9b164a043..25143045000 100644 --- a/drivers/net/ethernet/ti/davinci_emac.c +++ b/drivers/net/ethernet/ti/davinci_emac.c @@ -1532,7 +1532,7 @@ static int emac_dev_open(struct net_device *ndev) struct device *emac_dev = &ndev->dev; u32 cnt; struct resource *res; - int ret; + int q, m, ret; int i = 0; int k = 0; struct emac_priv *priv = netdev_priv(ndev); @@ -1567,8 +1567,7 @@ static int emac_dev_open(struct net_device *ndev) while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, k))) { for (i = res->start; i <= res->end; i++) { - if (devm_request_irq(&priv->pdev->dev, i, emac_irq, - 0, ndev->name, ndev)) + if (request_irq(i, emac_irq, 0, ndev->name, ndev)) goto rollback; } k++; @@ -1641,7 +1640,15 @@ static int emac_dev_open(struct net_device *ndev) rollback: - dev_err(emac_dev, "DaVinci EMAC: devm_request_irq() failed"); + dev_err(emac_dev, "DaVinci EMAC: request_irq() failed"); + + for (q = k; k >= 0; k--) { + for (m = i; m >= res->start; m--) + free_irq(m, ndev); + res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, k-1); + m = res->end; + } + ret = -EBUSY; err: pm_runtime_put(&priv->pdev->dev); @@ -1659,6 +1666,9 @@ err: */ static int emac_dev_stop(struct net_device *ndev) { + struct resource *res; + int i = 0; + int irq_num; struct emac_priv *priv = netdev_priv(ndev); struct device *emac_dev = &ndev->dev; @@ -1674,6 +1684,13 @@ static int emac_dev_stop(struct net_device *ndev) if (priv->phydev) phy_disconnect(priv->phydev); + /* Free IRQ */ + while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, i))) { + for (irq_num = res->start; irq_num <= res->end; irq_num++) + free_irq(irq_num, priv->ndev); + i++; + } + if (netif_msg_drv(priv)) dev_notice(emac_dev, "DaVinci EMAC: %s stopped\n", ndev->name); -- cgit v1.2.3-18-g5258 From cd11cf505318ff24e42f35145f9cdf8596fa1958 Mon Sep 17 00:00:00 2001 From: Christian Riesch Date: Mon, 24 Mar 2014 13:46:27 +0100 Subject: net: davinci_emac: Fix rollback of emac_dev_open() If an error occurs during the initialization in emac_dev_open() (the driver's ndo_open function), interrupts, DMA descriptors etc. must be freed. The current rollback code is buggy in several ways. 1) Freeing the interrupts. The current code will not free all interrupts that were requested by the driver. Furthermore, the code tries to do a platform_get_resource(priv->pdev, IORESOURCE_IRQ, -1) in its last iteration. This patch fixes these bugs. 2) Wrong order of err: and rollback: labels. If the setup of the PHY in the code fails, the interrupts that have been requested before are not freed: request irq if requesting irqs fails, goto rollback setup phy if phy setup fails, goto err return 0 rollback: free irqs err: This patch brings the code into the correct order. 3) The code calls napi_enable() and emac_int_enable(), but does not undo both in case of an error. This patch adds calls of emac_int_disable() and napi_disable() to the rollback code. 4) RX DMA descriptors are not freed in case of an error: Right before requesting the irqs, the function creates DMA descriptors for the RX channel. These RX descriptors are never freed when we jump to either rollback or err. This patch adds code for freeing the DMA descriptors in the case of an initialization error. This required a modification of cpdma_ctrl_stop() in davinci_cpdma.c: We must be able to call this function to free the DMA descriptors while the DMA channels are in IDLE state (before cpdma_ctlr_start() was called). Tested on a custom board with the Texas Instruments AM1808. Signed-off-by: Christian Riesch Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/davinci_cpdma.c | 4 +-- drivers/net/ethernet/ti/davinci_emac.c | 44 ++++++++++++++++++++++----------- 2 files changed, 31 insertions(+), 17 deletions(-) diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c index 364d0c7952c..88ef27067bf 100644 --- a/drivers/net/ethernet/ti/davinci_cpdma.c +++ b/drivers/net/ethernet/ti/davinci_cpdma.c @@ -355,7 +355,7 @@ int cpdma_ctlr_stop(struct cpdma_ctlr *ctlr) int i; spin_lock_irqsave(&ctlr->lock, flags); - if (ctlr->state != CPDMA_STATE_ACTIVE) { + if (ctlr->state == CPDMA_STATE_TEARDOWN) { spin_unlock_irqrestore(&ctlr->lock, flags); return -EINVAL; } @@ -891,7 +891,7 @@ int cpdma_chan_stop(struct cpdma_chan *chan) unsigned timeout; spin_lock_irqsave(&chan->lock, flags); - if (chan->state != CPDMA_STATE_ACTIVE) { + if (chan->state == CPDMA_STATE_TEARDOWN) { spin_unlock_irqrestore(&chan->lock, flags); return -EINVAL; } diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c index 25143045000..8f0e69ce07c 100644 --- a/drivers/net/ethernet/ti/davinci_emac.c +++ b/drivers/net/ethernet/ti/davinci_emac.c @@ -1533,8 +1533,8 @@ static int emac_dev_open(struct net_device *ndev) u32 cnt; struct resource *res; int q, m, ret; + int res_num = 0, irq_num = 0; int i = 0; - int k = 0; struct emac_priv *priv = netdev_priv(ndev); pm_runtime_get(&priv->pdev->dev); @@ -1564,14 +1564,24 @@ static int emac_dev_open(struct net_device *ndev) } /* Request IRQ */ + while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, + res_num))) { + for (irq_num = res->start; irq_num <= res->end; irq_num++) { + dev_err(emac_dev, "Request IRQ %d\n", irq_num); + if (request_irq(irq_num, emac_irq, 0, ndev->name, + ndev)) { + dev_err(emac_dev, + "DaVinci EMAC: request_irq() failed\n"); + ret = -EBUSY; - while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, k))) { - for (i = res->start; i <= res->end; i++) { - if (request_irq(i, emac_irq, 0, ndev->name, ndev)) goto rollback; + } } - k++; + res_num++; } + /* prepare counters for rollback in case of an error */ + res_num--; + irq_num--; /* Start/Enable EMAC hardware */ emac_hw_enable(priv); @@ -1638,19 +1648,23 @@ static int emac_dev_open(struct net_device *ndev) return 0; -rollback: - - dev_err(emac_dev, "DaVinci EMAC: request_irq() failed"); +err: + emac_int_disable(priv); + napi_disable(&priv->napi); - for (q = k; k >= 0; k--) { - for (m = i; m >= res->start; m--) +rollback: + for (q = res_num; q >= 0; q--) { + res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, q); + /* at the first iteration, irq_num is already set to the + * right value + */ + if (q != res_num) + irq_num = res->end; + + for (m = irq_num; m >= res->start; m--) free_irq(m, ndev); - res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, k-1); - m = res->end; } - - ret = -EBUSY; -err: + cpdma_ctlr_stop(priv->dma); pm_runtime_put(&priv->pdev->dev); return ret; } -- cgit v1.2.3-18-g5258