From 2c929420e8b532c14688dcd500253b90a24e7233 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Thu, 18 Aug 2011 19:24:54 +0900 Subject: ARM: EXYNOS4: use dma-pl330 device name for clock This change replaces s3c-pl330.x clock device names with dma-pl330.x, otherwise there won't be a correspondence between clock device name and amba device name, thus clocks can't be enabled. Fixes runtime errors on clk_get() from drivers/dma/pl330.c: dma-pl330 dma-pl330.0: Cannot get operation clock. dma-pl330: probe of dma-pl330.0 failed with error -22 Signed-off-by: Vladimir Zapolskiy Acked-by: Boojin Kim Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos4/clock.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c index 851dea01857..c7b62258722 100644 --- a/arch/arm/mach-exynos4/clock.c +++ b/arch/arm/mach-exynos4/clock.c @@ -455,12 +455,12 @@ static struct clk init_clocks_off[] = { .ctrlbit = (1 << 10), }, { .name = "pdma", - .devname = "s3c-pl330.0", + .devname = "dma-pl330.0", .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 0), }, { .name = "pdma", - .devname = "s3c-pl330.1", + .devname = "dma-pl330.1", .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 1), }, { -- cgit v1.2.3-18-g5258 From d20cc4c1b660d59a25f8bebef5d55c1872b9aa76 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Thu, 18 Aug 2011 19:24:55 +0900 Subject: ARM: S5PC100: use dma-pl330 device name for clock This change replaces s3c-pl330.x clock device names with dma-pl330.x, otherwise there won't be a correspondence between clock device name and amba device name, thus clocks can't be enabled. Fixes runtime errors on clk_get() from drivers/dma/pl330.c: dma-pl330 dma-pl330.0: Cannot get operation clock. dma-pl330: probe of dma-pl330.0 failed with error -22 Signed-off-by: Vladimir Zapolskiy Acked-by: Boojin Kim Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pc100/clock.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c index ff5cbb30de5..1f69f342a0a 100644 --- a/arch/arm/mach-s5pc100/clock.c +++ b/arch/arm/mach-s5pc100/clock.c @@ -455,13 +455,13 @@ static struct clk init_clocks_off[] = { .ctrlbit = (1 << 2), }, { .name = "pdma", - .devname = "s3c-pl330.1", + .devname = "dma-pl330.1", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_0_ctrl, .ctrlbit = (1 << 1), }, { .name = "pdma", - .devname = "s3c-pl330.0", + .devname = "dma-pl330.0", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_0_ctrl, .ctrlbit = (1 << 0), -- cgit v1.2.3-18-g5258 From 1ce3ea61c61c1e2127496df2c5d66650fd6456e2 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Thu, 18 Aug 2011 19:24:55 +0900 Subject: ARM: S5PV210: use dma-pl330 device name for clock This change replaces s3c-pl330.x clock device names with dma-pl330.x, otherwise there won't be a correspondence between clock device name and amba device name, thus clocks can't be enabled. Fixes runtime errors on clk_get() from drivers/dma/pl330.c: dma-pl330 dma-pl330.0: Cannot get operation clock. dma-pl330: probe of dma-pl330.0 failed with error -22 Signed-off-by: Vladimir Zapolskiy Acked-by: Boojin Kim Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv210/clock.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index 52a8e607bcc..50d458047c0 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -290,13 +290,13 @@ static struct clk_ops clk_fout_apll_ops = { static struct clk init_clocks_off[] = { { .name = "pdma", - .devname = "s3c-pl330.0", + .devname = "dma-pl330.0", .parent = &clk_hclk_psys.clk, .enable = s5pv210_clk_ip0_ctrl, .ctrlbit = (1 << 3), }, { .name = "pdma", - .devname = "s3c-pl330.1", + .devname = "dma-pl330.1", .parent = &clk_hclk_psys.clk, .enable = s5pv210_clk_ip0_ctrl, .ctrlbit = (1 << 4), -- cgit v1.2.3-18-g5258 From 2213d0c0bae510df3860a48e107a5ba17ac72e99 Mon Sep 17 00:00:00 2001 From: Boojin Kim Date: Thu, 18 Aug 2011 19:24:55 +0900 Subject: ARM: S5P64X0: Add the devname for DMA clock This patch adds devname for DMA clock. NOTE: This patch should be added after merging new pl330 driver on dmaengine. Signed-off-by: Boojin Kim Signed-off-by: Kukjin Kim --- arch/arm/mach-s5p64x0/clock-s5p6440.c | 1 + arch/arm/mach-s5p64x0/clock-s5p6450.c | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c index 0e9cd3092dd..fd7b08fd262 100644 --- a/arch/arm/mach-s5p64x0/clock-s5p6440.c +++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c @@ -147,6 +147,7 @@ static struct clk init_clocks_off[] = { .ctrlbit = (1 << 8), }, { .name = "pdma", + .devname = "dma-pl330", .parent = &clk_hclk_low.clk, .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 12), diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c index d9dc16cde10..1d989b8da03 100644 --- a/arch/arm/mach-s5p64x0/clock-s5p6450.c +++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c @@ -180,6 +180,7 @@ static struct clk init_clocks_off[] = { .ctrlbit = (1 << 3), }, { .name = "pdma", + .devname = "dma-pl330", .parent = &clk_hclk_low.clk, .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 12), -- cgit v1.2.3-18-g5258 From 986afc98ce24901865828dab9ba876fd9be6beb2 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 12 Aug 2011 18:08:17 +0900 Subject: ARM: S3C64XX: Hook up GPIO initiated DVS on Cragganmore Allow us to ramp VDDARM quickly by using a GPIO to signal a voltage change instead of doing a register write. Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/mach-crag6410.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index af0c2fe1ea3..5affb26a198 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -353,6 +353,12 @@ static struct pca953x_platform_data crag6410_pca_data = { .irq_base = 0, }; +/* VDDARM is controlled by DVS1 connected to GPK(0) */ +static struct wm831x_buckv_pdata vddarm_pdata = { + .dvs_control_src = 1, + .dvs_gpio = S3C64XX_GPK(0), +}; + static struct regulator_consumer_supply vddarm_consumers[] __initdata = { REGULATOR_SUPPLY("vddarm", NULL), }; @@ -368,6 +374,7 @@ static struct regulator_init_data vddarm __initdata = { .num_consumer_supplies = ARRAY_SIZE(vddarm_consumers), .consumer_supplies = vddarm_consumers, .supply_regulator = "WALLVDD", + .driver_data = &vddarm_pdata, }; static struct regulator_init_data vddint __initdata = { @@ -503,6 +510,8 @@ static struct wm831x_pdata crag_pmic_pdata __initdata = { .backup = &banff_backup_pdata, .gpio_defaults = { + /* GPIO5: DVS1_REQ - CMOS, DBVDD, active high */ + [4] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA | 0x8, /* GPIO11: Touchscreen data - CMOS, DBVDD, active high*/ [10] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x6, /* GPIO12: Touchscreen pen down - CMOS, DBVDD, active high*/ -- cgit v1.2.3-18-g5258 From fad23ddac36920600e2457cf540c4d6383290cd2 Mon Sep 17 00:00:00 2001 From: Alim Akhtar Date: Mon, 19 Sep 2011 10:27:19 +0900 Subject: ARM: EXYNOS4: register the second instance of pl330 DMAC Platform data is provided for two instance of pl330 DMAC, but only one DMAC is register with amba_device. This patch register the second instance. Signed-off-by: Alim Akhtar Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos4/dma.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-exynos4/dma.c b/arch/arm/mach-exynos4/dma.c index d57d6625502..9667c61e64f 100644 --- a/arch/arm/mach-exynos4/dma.c +++ b/arch/arm/mach-exynos4/dma.c @@ -243,6 +243,7 @@ struct amba_device exynos4_device_pdma1 = { static int __init exynos4_dma_init(void) { amba_device_register(&exynos4_device_pdma0, &iomem_resource); + amba_device_register(&exynos4_device_pdma1, &iomem_resource); return 0; } -- cgit v1.2.3-18-g5258 From f86147cc8faca81de5edfa1fab07b119c1867322 Mon Sep 17 00:00:00 2001 From: Alim Akhtar Date: Mon, 19 Sep 2011 10:27:23 +0900 Subject: ARM: S5PV210: register the second instance of pl330 DMAC Platform data is provided for two instance of pl330 DMAC, but only one DMAC is register with amba_device. This patch register the second instance. Signed-off-by: Alim Akhtar Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv210/dma.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c index f79d0b06cbf..86b749c18b7 100644 --- a/arch/arm/mach-s5pv210/dma.c +++ b/arch/arm/mach-s5pv210/dma.c @@ -254,6 +254,7 @@ struct amba_device s5pv210_device_pdma1 = { static int __init s5pv210_dma_init(void) { amba_device_register(&s5pv210_device_pdma0, &iomem_resource); + amba_device_register(&s5pv210_device_pdma1, &iomem_resource); return 0; } -- cgit v1.2.3-18-g5258 From d5663e7a404ae97888bb8e7a7376de3fb0878ddd Mon Sep 17 00:00:00 2001 From: Alim Akhtar Date: Mon, 19 Sep 2011 10:27:26 +0900 Subject: ARM: S5PC100: register the second instance of pl330 DMAC Platform data is provided for two instance of pl330 DMAC, but only one DMAC is register with amba_device. This patch register the second instance. Signed-off-by: Alim Akhtar Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pc100/dma.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c index ef803e92d35..065a087f5a8 100644 --- a/arch/arm/mach-s5pc100/dma.c +++ b/arch/arm/mach-s5pc100/dma.c @@ -260,6 +260,7 @@ struct amba_device s5pc100_device_pdma1 = { static int __init s5pc100_dma_init(void) { amba_device_register(&s5pc100_device_pdma0, &iomem_resource); + amba_device_register(&s5pc100_device_pdma1, &iomem_resource); return 0; } -- cgit v1.2.3-18-g5258 From d0f0b43f78b88b42e795e4c28f3591cb57590692 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 19 Aug 2011 22:40:07 +0900 Subject: ARM: S3C64XX: Use module identification for Cragganmore system builds The Cragganmore system is modular with I2C based identification chips on the system allowing identification of the system build. Provide a stub I2C driver which parses the module IDs and uses them to select the appropriate audio subsystem components to register. To avoid confusion due to having the mini-driver in the system the driver is placed in a separate file. Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/Kconfig | 1 + arch/arm/mach-s3c64xx/Makefile | 2 +- arch/arm/mach-s3c64xx/include/mach/crag6410.h | 23 ++++ arch/arm/mach-s3c64xx/mach-crag6410-module.c | 173 ++++++++++++++++++++++++++ arch/arm/mach-s3c64xx/mach-crag6410.c | 85 +------------ 5 files changed, 203 insertions(+), 81 deletions(-) create mode 100644 arch/arm/mach-s3c64xx/include/mach/crag6410.h create mode 100644 arch/arm/mach-s3c64xx/mach-crag6410-module.c diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index f057b6ae4f9..5552e048c2b 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -288,5 +288,6 @@ config MACH_WLF_CRAGG_6410 select S3C_DEV_RTC select S3C64XX_DEV_SPI select S3C24XX_GPIO_EXTRA128 + select I2C help Machine support for the Wolfson Cragganmore S3C6410 variant. diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile index 61b4034a0c2..5fdea6aa50d 100644 --- a/arch/arm/mach-s3c64xx/Makefile +++ b/arch/arm/mach-s3c64xx/Makefile @@ -55,7 +55,7 @@ obj-$(CONFIG_MACH_HMT) += mach-hmt.o obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o -obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o +obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o # device support diff --git a/arch/arm/mach-s3c64xx/include/mach/crag6410.h b/arch/arm/mach-s3c64xx/include/mach/crag6410.h new file mode 100644 index 00000000000..be9074e17df --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/crag6410.h @@ -0,0 +1,23 @@ +/* Cragganmore 6410 shared definitions + * + * Copyright 2011 Wolfson Microelectronics plc + * Mark Brown + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef MACH_CRAG6410_H +#define MACH_CRAG6410_H + +#include + +#define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START +#define GLENFARCLAS_PMIC_IRQ_BASE (IRQ_BOARD_START + 64) + +#define PCA935X_GPIO_BASE GPIO_BOARD_START +#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8) +#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 16) + +#endif diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c new file mode 100644 index 00000000000..0708fa01db9 --- /dev/null +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -0,0 +1,173 @@ +/* Speyside modules for Cragganmore - board data probing + * + * Copyright 2011 Wolfson Microelectronics plc + * Mark Brown + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include + +#include +#include + +#include +#include +#include + +#include + +static struct wm8996_retune_mobile_config wm8996_retune[] = { + { + .name = "Sub LPF", + .rate = 48000, + .regs = { + 0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000, + 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000, + 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000 + }, + }, + { + .name = "Sub HPF", + .rate = 48000, + .regs = { + 0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000, + 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000, + 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000 + }, + }, +}; + +static struct wm8996_pdata wm8996_pdata __initdata = { + .ldo_ena = S3C64XX_GPN(7), + .gpio_base = CODEC_GPIO_BASE, + .micdet_def = 1, + .inl_mode = WM8996_DIFFERRENTIAL_1, + .inr_mode = WM8996_DIFFERRENTIAL_1, + + .irq_flags = IRQF_TRIGGER_RISING, + + .gpio_default = { + 0x8001, /* GPIO1 == ADCLRCLK1 */ + 0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */ + 0x0141, /* GPIO3 == HP_SEL */ + 0x0002, /* GPIO4 == IRQ */ + 0x020e, /* GPIO5 == CLKOUT */ + }, + + .retune_mobile_cfgs = wm8996_retune, + .num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune), +}; + +static struct wm8962_pdata wm8962_pdata __initdata = { + .gpio_init = { + 0, + WM8962_GPIO_FN_OPCLK, + WM8962_GPIO_FN_DMICCLK, + 0, + 0x8000 | WM8962_GPIO_FN_DMICDAT, + WM8962_GPIO_FN_IRQ, /* Open drain mode */ + }, + .irq_active_low = true, +}; + +static struct wm9081_pdata wm9081_pdata __initdata = { + .irq_high = false, + .irq_cmos = false, +}; + +static const struct i2c_board_info wm1254_devs[] = { + { I2C_BOARD_INFO("wm8996", 0x1a), + .platform_data = &wm8996_pdata, + .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, + }, + { I2C_BOARD_INFO("wm9081", 0x6c), + .platform_data = &wm9081_pdata, }, +}; + +static const struct i2c_board_info wm1259_devs[] = { + { I2C_BOARD_INFO("wm8962", 0x1a), + .platform_data = &wm8962_pdata, + .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, + }, +}; + + +static __devinitdata const struct { + u8 id; + const char *name; + const struct i2c_board_info *i2c_devs; + int num_i2c_devs; +} gf_mods[] = { + { .id = 0x01, .name = "1250-EV1 Springbank" }, + { .id = 0x02, .name = "1251-EV1 Jura" }, + { .id = 0x03, .name = "1252-EV1 Glenlivet" }, + { .id = 0x11, .name = "6249-EV2 Glenfarclas", }, + { .id = 0x21, .name = "1275-EV1 Mortlach" }, + { .id = 0x25, .name = "1274-EV1 Glencadam" }, + { .id = 0x31, .name = "1253-EV1 Tomatin", }, + { .id = 0x39, .name = "1254-EV1 Dallas Dhu", + .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) }, + { .id = 0x3a, .name = "1259-EV1 Tobermory", + .i2c_devs = wm1259_devs, .num_i2c_devs = ARRAY_SIZE(wm1259_devs) }, + { .id = 0x3b, .name = "1255-EV1 Kilchoman" }, + { .id = 0x3c, .name = "1273-EV1 Longmorn" }, +}; + +static __devinit int wlf_gf_module_probe(struct i2c_client *i2c, + const struct i2c_device_id *i2c_id) +{ + int ret, i, j, id, rev; + + ret = i2c_smbus_read_byte_data(i2c, 0); + if (ret < 0) { + dev_err(&i2c->dev, "Failed to read ID: %d\n", ret); + return ret; + } + + id = (ret & 0xfe) >> 2; + rev = ret & 0x3; + for (i = 0; i < ARRAY_SIZE(gf_mods); i++) + if (id == gf_mods[i].id) + break; + + if (i < ARRAY_SIZE(gf_mods)) { + dev_info(&i2c->dev, "%s revision %d\n", + gf_mods[i].name, rev + 1); + for (j = 0; j < gf_mods[i].num_i2c_devs; j++) { + if (!i2c_new_device(i2c->adapter, + &(gf_mods[i].i2c_devs[j]))) + dev_err(&i2c->dev, + "Failed to register dev: %d\n", ret); + } + } else { + dev_warn(&i2c->dev, "Unknown module ID %d revision %d\n", + id, rev); + } + + return 0; +} + +static const struct i2c_device_id wlf_gf_module_id[] = { + { "wlf-gf-module", 0 }, + { } +}; + +static struct i2c_driver wlf_gf_module_driver = { + .driver = { + .name = "wlf-gf-module", + .owner = THIS_MODULE, + }, + .probe = wlf_gf_module_probe, + .id_table = wlf_gf_module_id, +}; + +static int __init wlf_gf_module_register(void) +{ + return i2c_add_driver(&wlf_gf_module_driver); +} +module_init(wlf_gf_module_register); diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 5affb26a198..1ef53b28f68 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -47,6 +47,7 @@ #include #include #include +#include #include @@ -65,17 +66,6 @@ #include #include -#include -#include -#include - -#define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START -#define GLENFARCLAS_PMIC_IRQ_BASE (IRQ_BOARD_START + 64) - -#define PCA935X_GPIO_BASE GPIO_BOARD_START -#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8) -#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 16) - /* serial port setup */ #define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK) @@ -623,81 +613,16 @@ static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = { .disable_touch = true, }; -static struct wm8996_retune_mobile_config wm8996_retune[] = { - { - .name = "Sub LPF", - .rate = 48000, - .regs = { - 0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000, - 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000, - 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000 - }, - }, - { - .name = "Sub HPF", - .rate = 48000, - .regs = { - 0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000, - 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000, - 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000 - }, - }, -}; - -static struct wm8996_pdata wm8996_pdata __initdata = { - .ldo_ena = S3C64XX_GPN(7), - .gpio_base = CODEC_GPIO_BASE, - .micdet_def = 1, - .inl_mode = WM8996_DIFFERRENTIAL_1, - .inr_mode = WM8996_DIFFERRENTIAL_1, - - .irq_flags = IRQF_TRIGGER_RISING, - - .gpio_default = { - 0x8001, /* GPIO1 == ADCLRCLK1 */ - 0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */ - 0x0141, /* GPIO3 == HP_SEL */ - 0x0002, /* GPIO4 == IRQ */ - 0x020e, /* GPIO5 == CLKOUT */ - }, - - .retune_mobile_cfgs = wm8996_retune, - .num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune), -}; - -static struct wm8962_pdata wm8962_pdata __initdata = { - .gpio_init = { - 0, - WM8962_GPIO_FN_OPCLK, - WM8962_GPIO_FN_DMICCLK, - 0, - 0x8000 | WM8962_GPIO_FN_DMICDAT, - WM8962_GPIO_FN_IRQ, /* Open drain mode */ - }, - .irq_active_low = true, -}; - -static struct wm9081_pdata wm9081_pdata __initdata = { - .irq_high = false, - .irq_cmos = false, -}; - static struct i2c_board_info i2c_devs1[] __initdata = { { I2C_BOARD_INFO("wm8311", 0x34), .irq = S3C_EINT(0), .platform_data = &glenfarclas_pmic_pdata }, + { I2C_BOARD_INFO("wlf-gf-module", 0x24) }, + { I2C_BOARD_INFO("wlf-gf-module", 0x25) }, + { I2C_BOARD_INFO("wlf-gf-module", 0x26) }, + { I2C_BOARD_INFO("wm1250-ev1", 0x27) }, - { I2C_BOARD_INFO("wm8996", 0x1a), - .platform_data = &wm8996_pdata, - .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, - }, - { I2C_BOARD_INFO("wm9081", 0x6c), - .platform_data = &wm9081_pdata, }, - { I2C_BOARD_INFO("wm8962", 0x1a), - .platform_data = &wm8962_pdata, - .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, - }, }; static void __init crag6410_map_io(void) -- cgit v1.2.3-18-g5258 From 4ed12b50708875e23ecea191d538e6666b2196eb Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 31 Aug 2011 08:03:11 +0900 Subject: ARM: S3C64XX: Hook up some additional supplies on Cragganmore For further modules. Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/mach-crag6410.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 1ef53b28f68..9c287a3e28e 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -285,6 +285,8 @@ static struct platform_device speyside_wm8962_device = { static struct regulator_consumer_supply wallvdd_consumers[] = { REGULATOR_SUPPLY("SPKVDD1", "1-001a"), REGULATOR_SUPPLY("SPKVDD2", "1-001a"), + REGULATOR_SUPPLY("SPKVDDL", "1-001a"), + REGULATOR_SUPPLY("SPKVDDR", "1-001a"), }; static struct regulator_init_data wallvdd_data = { @@ -561,6 +563,9 @@ static struct regulator_init_data pvdd_1v2 __initdata = { static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = { REGULATOR_SUPPLY("PLLVDD", "1-001a"), REGULATOR_SUPPLY("DBVDD", "1-001a"), + REGULATOR_SUPPLY("DBVDD1", "1-001a"), + REGULATOR_SUPPLY("DBVDD2", "1-001a"), + REGULATOR_SUPPLY("DBVDD3", "1-001a"), REGULATOR_SUPPLY("CPVDD", "1-001a"), REGULATOR_SUPPLY("AVDD2", "1-001a"), REGULATOR_SUPPLY("DCVDD", "1-001a"), -- cgit v1.2.3-18-g5258 From 3aa7779c748bf340dd122e2d4205f312af977544 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 5 Sep 2011 14:48:39 +0900 Subject: ARM: S3C64XX: Add devices for Kilchoman audio module on Cragganmore The Kilchoman audio module carries a WM5100 audio CODEC and WM9081 speaker amplifier. Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/mach-crag6410-module.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index 0708fa01db9..66668565ee7 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -89,6 +89,14 @@ static const struct i2c_board_info wm1254_devs[] = { .platform_data = &wm9081_pdata, }, }; +static const struct i2c_board_info wm1255_devs[] = { + { I2C_BOARD_INFO("wm5100", 0x1a), + .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, + }, + { I2C_BOARD_INFO("wm9081", 0x6c), + .platform_data = &wm9081_pdata, }, +}; + static const struct i2c_board_info wm1259_devs[] = { { I2C_BOARD_INFO("wm8962", 0x1a), .platform_data = &wm8962_pdata, @@ -114,7 +122,8 @@ static __devinitdata const struct { .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) }, { .id = 0x3a, .name = "1259-EV1 Tobermory", .i2c_devs = wm1259_devs, .num_i2c_devs = ARRAY_SIZE(wm1259_devs) }, - { .id = 0x3b, .name = "1255-EV1 Kilchoman" }, + { .id = 0x3b, .name = "1255-EV1 Kilchoman", + .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) }, { .id = 0x3c, .name = "1273-EV1 Longmorn" }, }; -- cgit v1.2.3-18-g5258 From 8c051ab47bf3e0d35636d4772f9c0504bebe2fec Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 5 Sep 2011 14:50:02 +0900 Subject: ARM: S3C64XX: Register Lowland audio device on Cragganmore The Lowland system is a combination of the Cragganmore CPU module and the Tomatin and Kilchomin audio modules on Glenfarclas. Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/mach-crag6410.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 9c287a3e28e..a0422a71999 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -277,6 +277,11 @@ static struct platform_device speyside_device = { .id = -1, }; +static struct platform_device lowland_device = { + .name = "lowland", + .id = -1, +}; + static struct platform_device speyside_wm8962_device = { .name = "speyside-wm8962", .id = -1, @@ -337,6 +342,7 @@ static struct platform_device *crag6410_devices[] __initdata = { &crag6410_backlight_device, &speyside_device, &speyside_wm8962_device, + &lowland_device, &wallvdd_device, }; -- cgit v1.2.3-18-g5258 From 6d8d492ef73433ea8debfba623dc2ee4d627aa7e Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Tue, 23 Aug 2011 11:33:08 +0900 Subject: ARM: S3C64XX: Use S3C64XX_SDMA_SEL register name instead of numeric address This patch adds a definition of S3C64XX_SDMA_SEL register and modifies the s3c64xx DMA driver to use it instead of a magic register address. Signed-off-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/dma.c | 2 +- arch/arm/mach-s3c64xx/include/mach/regs-sys.h | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c index 204bfafe4bf..0849f2d3b10 100644 --- a/arch/arm/mach-s3c64xx/dma.c +++ b/arch/arm/mach-s3c64xx/dma.c @@ -740,7 +740,7 @@ static int __init s3c64xx_dma_init(void) } /* Set all DMA configuration to be DMA, not SDMA */ - writel(0xffffff, S3C_SYSREG(0x110)); + writel(0xffffff, S3C64XX_SDMA_SEL); /* Register standard DMA controllers */ s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000); diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-sys.h b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h index 69b78d9f83b..774e0de3140 100644 --- a/arch/arm/mach-s3c64xx/include/mach/regs-sys.h +++ b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h @@ -21,6 +21,8 @@ #define S3C64XX_AHB_CON1 S3C_SYSREG(0x104) #define S3C64XX_AHB_CON2 S3C_SYSREG(0x108) +#define S3C64XX_SDMA_SEL S3C_SYSREG(0x110) + #define S3C64XX_OTHERS S3C_SYSREG(0x900) #define S3C64XX_OTHERS_USBMASK (1 << 16) -- cgit v1.2.3-18-g5258 From 348276f4a37ab98559c8c63cbe2a122b7ff65421 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Tue, 23 Aug 2011 11:33:08 +0900 Subject: ARM: S3C64XX: Save/restore S3C64XX_SDMA_SEL on suspend/resume This patch makes sure that S3C64XX_SDMA_SEL register is preserved during sleep mode, as it is critical for DMA operation and the DMA driver alone does not provide any power management facilities. Signed-off-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/pm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index 055e2858b0d..72e3ab2ac08 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -85,6 +85,8 @@ static struct sleep_save misc_save[] = { SAVE_ITEM(S3C64XX_MEM0CONSLP0), SAVE_ITEM(S3C64XX_MEM0CONSLP1), SAVE_ITEM(S3C64XX_MEM1CONSLP), + + SAVE_ITEM(S3C64XX_SDMA_SEL), }; void s3c_pm_configure_extint(void) -- cgit v1.2.3-18-g5258 From d9018df00785d7ff52aa7fa8acfacd8a036fc832 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Tue, 23 Aug 2011 11:33:08 +0900 Subject: ARM: S3C64XX: Save/restore S3C64XX_MODEM_MIFPCON on suspend/resume This patch makes sure that the LCD bypass state is preserved during sleep mode. It achieves this by saving the S3C64XX_MODEM_MIFPCON register, which is not handled by any other code currently. Signed-off-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/pm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index 72e3ab2ac08..b375cd5c47c 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -29,6 +29,7 @@ #include #include #include +#include #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK void s3c_pm_debug_smdkled(u32 set, u32 clear) @@ -87,6 +88,7 @@ static struct sleep_save misc_save[] = { SAVE_ITEM(S3C64XX_MEM1CONSLP), SAVE_ITEM(S3C64XX_SDMA_SEL), + SAVE_ITEM(S3C64XX_MODEM_MIFPCON), }; void s3c_pm_configure_extint(void) -- cgit v1.2.3-18-g5258 From fb5d375d352ee5830b33ccdff06eb4f5f1d603f5 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Fri, 19 Aug 2011 11:54:31 +0200 Subject: ARM: S3C64XX: Add support for synchronous clock operation Some boards based on S3C6410 use synchronous clocking, which means that HCLKx2 and other system clocks are generated from APLL instead of MPLL. This patch adds support for such boards, by calculating hclk2 depending on the status of S3C_OTHERS_SYNCMUXSEL bit in S3C64XX_OTHERS regist Signed-off-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/clock.c | 8 +++++++- arch/arm/mach-s3c64xx/include/mach/regs-sys.h | 1 + 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c index 8cf39e33579..872e68361eb 100644 --- a/arch/arm/mach-s3c64xx/clock.c +++ b/arch/arm/mach-s3c64xx/clock.c @@ -744,7 +744,13 @@ void __init_or_cpufreq s3c6400_setup_clocks(void) printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n", apll, mpll, epll); - hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2); + if(__raw_readl(S3C64XX_OTHERS) & S3C64XX_OTHERS_SYNCMUXSEL) + /* Synchronous mode */ + hclk2 = apll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2); + else + /* Asynchronous mode */ + hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2); + hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK); pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK); diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-sys.h b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h index 774e0de3140..b91e0209328 100644 --- a/arch/arm/mach-s3c64xx/include/mach/regs-sys.h +++ b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h @@ -26,5 +26,6 @@ #define S3C64XX_OTHERS S3C_SYSREG(0x900) #define S3C64XX_OTHERS_USBMASK (1 << 16) +#define S3C64XX_OTHERS_SYNCMUXSEL (1 << 6) #endif /* _PLAT_REGS_SYS_H */ -- cgit v1.2.3-18-g5258 From 536137bc9ff1738a7bee9b31047a7cd56860180e Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Fri, 26 Aug 2011 11:03:03 +0900 Subject: gpio/s3c24xx: move gpio driver into drivers/gpio/ Cc: Ben Dooks Acked-by: Grant Likely Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c2410/Kconfig | 6 - arch/arm/mach-s3c2410/Makefile | 1 - arch/arm/mach-s3c2412/Kconfig | 1 - arch/arm/mach-s3c2412/Makefile | 1 - arch/arm/mach-s3c2440/Kconfig | 2 - arch/arm/plat-s3c24xx/Makefile | 2 - arch/arm/plat-s3c24xx/gpio.c | 96 -------------- arch/arm/plat-s3c24xx/gpiolib.c | 229 -------------------------------- drivers/gpio/Kconfig | 4 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-s3c24xx.c | 283 ++++++++++++++++++++++++++++++++++++++++ 11 files changed, 288 insertions(+), 338 deletions(-) delete mode 100644 arch/arm/plat-s3c24xx/gpio.c delete mode 100644 arch/arm/plat-s3c24xx/gpiolib.c create mode 100644 drivers/gpio/gpio-s3c24xx.c diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 7245a55795d..3700cf32af0 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -8,7 +8,6 @@ config CPU_S3C2410 select CPU_ARM920T select S3C_GPIO_PULL_UP select S3C2410_CLOCK - select S3C2410_GPIO select CPU_LLSERIAL_S3C2410 select S3C2410_PM if PM select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX @@ -28,11 +27,6 @@ config S3C2410_PM help Power Management code common to S3C2410 and better -config S3C2410_GPIO - bool - help - GPIO code for S3C2410 and similar processors - config SIMTEC_NOR bool help diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 81695353d8f..782fd81144e 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_CPU_S3C2410) += s3c2410.o obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o -obj-$(CONFIG_S3C2410_GPIO) += gpio.o obj-$(CONFIG_S3C2410_CPUFREQ) += cpu-freq.o obj-$(CONFIG_S3C2410_PLLTABLE) += pll.o diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig index c2cf4e56998..b8b9029e9f2 100644 --- a/arch/arm/mach-s3c2412/Kconfig +++ b/arch/arm/mach-s3c2412/Kconfig @@ -9,7 +9,6 @@ config CPU_S3C2412 select CPU_LLSERIAL_S3C2440 select S3C2412_PM if PM select S3C2412_DMA if S3C2410_DMA - select S3C2410_GPIO help Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile index 6c48a91ea39..7e4d95fa8a9 100644 --- a/arch/arm/mach-s3c2412/Makefile +++ b/arch/arm/mach-s3c2412/Makefile @@ -12,7 +12,6 @@ obj- := obj-$(CONFIG_CPU_S3C2412) += s3c2412.o obj-$(CONFIG_CPU_S3C2412) += irq.o obj-$(CONFIG_CPU_S3C2412) += clock.o -obj-$(CONFIG_CPU_S3C2412) += gpio.o obj-$(CONFIG_S3C2412_DMA) += dma.o obj-$(CONFIG_S3C2412_PM) += pm.o obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep.o diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index 50825a3f91c..c461fb8e15c 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -8,7 +8,6 @@ config CPU_S3C2440 select S3C_GPIO_PULL_UP select S3C2410_CLOCK select S3C2410_PM if PM - select S3C2410_GPIO select S3C2440_DMA if S3C2410_DMA select CPU_S3C244X select CPU_LLSERIAL_S3C2440 @@ -20,7 +19,6 @@ config CPU_S3C2442 select CPU_ARM920T select S3C_GPIO_PULL_DOWN select S3C2410_CLOCK - select S3C2410_GPIO select S3C2410_PM if PM select CPU_S3C244X select CPU_LLSERIAL_S3C2440 diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index 0291bd6e236..e4f46495ed3 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -15,8 +15,6 @@ obj- := obj-y += cpu.o obj-y += irq.o obj-y += devs.o -obj-y += gpio.o -obj-y += gpiolib.o obj-y += clock.o obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c deleted file mode 100644 index 2f3d7c089df..00000000000 --- a/arch/arm/plat-s3c24xx/gpio.c +++ /dev/null @@ -1,96 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/gpio.c - * - * Copyright (c) 2004-2010 Simtec Electronics - * Ben Dooks - * - * S3C24XX GPIO support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include - -#include - -/* gpiolib wrappers until these are totally eliminated */ - -void s3c2410_gpio_pullup(unsigned int pin, unsigned int to) -{ - int ret; - - WARN_ON(to); /* should be none of these left */ - - if (!to) { - /* if pull is enabled, try first with up, and if that - * fails, try using down */ - - ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP); - if (ret) - s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN); - } else { - s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE); - } -} -EXPORT_SYMBOL(s3c2410_gpio_pullup); - -void s3c2410_gpio_setpin(unsigned int pin, unsigned int to) -{ - /* do this via gpiolib until all users removed */ - - gpio_request(pin, "temporary"); - gpio_set_value(pin, to); - gpio_free(pin); -} - -EXPORT_SYMBOL(s3c2410_gpio_setpin); - -unsigned int s3c2410_gpio_getpin(unsigned int pin) -{ - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); - unsigned long offs = pin - chip->chip.base; - - return __raw_readl(chip->base + 0x04) & (1<< offs); -} - -EXPORT_SYMBOL(s3c2410_gpio_getpin); - -unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change) -{ - unsigned long flags; - unsigned long misccr; - - local_irq_save(flags); - misccr = __raw_readl(S3C24XX_MISCCR); - misccr &= ~clear; - misccr ^= change; - __raw_writel(misccr, S3C24XX_MISCCR); - local_irq_restore(flags); - - return misccr; -} - -EXPORT_SYMBOL(s3c2410_modify_misccr); diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c deleted file mode 100644 index 243b6411050..00000000000 --- a/arch/arm/plat-s3c24xx/gpiolib.c +++ /dev/null @@ -1,229 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/gpiolib.c - * - * Copyright (c) 2008-2010 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * S3C24XX GPIOlib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. -*/ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#include - -static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset) -{ - return -EINVAL; -} - -static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long flags; - unsigned long dat; - unsigned long con; - - local_irq_save(flags); - - con = __raw_readl(base + 0x00); - dat = __raw_readl(base + 0x04); - - dat &= ~(1 << offset); - if (value) - dat |= 1 << offset; - - __raw_writel(dat, base + 0x04); - - con &= ~(1 << offset); - - __raw_writel(con, base + 0x00); - __raw_writel(dat, base + 0x04); - - local_irq_restore(flags); - return 0; -} - -static int s3c24xx_gpiolib_bankf_toirq(struct gpio_chip *chip, unsigned offset) -{ - if (offset < 4) - return IRQ_EINT0 + offset; - - if (offset < 8) - return IRQ_EINT4 + offset - 4; - - return -EINVAL; -} - -static struct s3c_gpio_cfg s3c24xx_gpiocfg_banka = { - .set_config = s3c_gpio_setcfg_s3c24xx_a, - .get_config = s3c_gpio_getcfg_s3c24xx_a, -}; - -struct s3c_gpio_cfg s3c24xx_gpiocfg_default = { - .set_config = s3c_gpio_setcfg_s3c24xx, - .get_config = s3c_gpio_getcfg_s3c24xx, -}; - -struct s3c_gpio_chip s3c24xx_gpios[] = { - [0] = { - .base = S3C2410_GPACON, - .pm = __gpio_pm(&s3c_gpio_pm_1bit), - .config = &s3c24xx_gpiocfg_banka, - .chip = { - .base = S3C2410_GPA(0), - .owner = THIS_MODULE, - .label = "GPIOA", - .ngpio = 24, - .direction_input = s3c24xx_gpiolib_banka_input, - .direction_output = s3c24xx_gpiolib_banka_output, - }, - }, - [1] = { - .base = S3C2410_GPBCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPB(0), - .owner = THIS_MODULE, - .label = "GPIOB", - .ngpio = 16, - }, - }, - [2] = { - .base = S3C2410_GPCCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPC(0), - .owner = THIS_MODULE, - .label = "GPIOC", - .ngpio = 16, - }, - }, - [3] = { - .base = S3C2410_GPDCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPD(0), - .owner = THIS_MODULE, - .label = "GPIOD", - .ngpio = 16, - }, - }, - [4] = { - .base = S3C2410_GPECON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPE(0), - .label = "GPIOE", - .owner = THIS_MODULE, - .ngpio = 16, - }, - }, - [5] = { - .base = S3C2410_GPFCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPF(0), - .owner = THIS_MODULE, - .label = "GPIOF", - .ngpio = 8, - .to_irq = s3c24xx_gpiolib_bankf_toirq, - }, - }, - [6] = { - .base = S3C2410_GPGCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .irq_base = IRQ_EINT8, - .chip = { - .base = S3C2410_GPG(0), - .owner = THIS_MODULE, - .label = "GPIOG", - .ngpio = 16, - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = S3C2410_GPHCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPH(0), - .owner = THIS_MODULE, - .label = "GPIOH", - .ngpio = 11, - }, - }, - /* GPIOS for the S3C2443 and later devices. */ - { - .base = S3C2440_GPJCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPJ(0), - .owner = THIS_MODULE, - .label = "GPIOJ", - .ngpio = 16, - }, - }, { - .base = S3C2443_GPKCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPK(0), - .owner = THIS_MODULE, - .label = "GPIOK", - .ngpio = 16, - }, - }, { - .base = S3C2443_GPLCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPL(0), - .owner = THIS_MODULE, - .label = "GPIOL", - .ngpio = 15, - }, - }, { - .base = S3C2443_GPMCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPM(0), - .owner = THIS_MODULE, - .label = "GPIOM", - .ngpio = 2, - }, - }, -}; - - -static __init int s3c24xx_gpiolib_init(void) -{ - struct s3c_gpio_chip *chip = s3c24xx_gpios; - int gpn; - - for (gpn = 0; gpn < ARRAY_SIZE(s3c24xx_gpios); gpn++, chip++) { - if (!chip->config) - chip->config = &s3c24xx_gpiocfg_default; - - s3c_gpiolib_add(chip); - } - - return 0; -} - -core_initcall(s3c24xx_gpiolib_init); diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index d539efd96d4..5654e1b082a 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -135,6 +135,10 @@ config GPIO_PLAT_SAMSUNG def_bool y depends on SAMSUNG_GPIOLIB_4BIT +config GPIO_S3C24XX + def_bool y + depends on PLAT_S3C24XX + config GPIO_S5PC100 def_bool y depends on CPU_S5PC100 diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 9588948c96f..c7f1c00986c 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -40,6 +40,7 @@ obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o obj-$(CONFIG_GPIO_PLAT_SAMSUNG) += gpio-plat-samsung.o +obj-$(CONFIG_GPIO_S3C24XX) += gpio-s3c24xx.o obj-$(CONFIG_GPIO_S5PC100) += gpio-s5pc100.o obj-$(CONFIG_GPIO_S5PV210) += gpio-s5pv210.o diff --git a/drivers/gpio/gpio-s3c24xx.c b/drivers/gpio/gpio-s3c24xx.c new file mode 100644 index 00000000000..ff6103130fe --- /dev/null +++ b/drivers/gpio/gpio-s3c24xx.c @@ -0,0 +1,283 @@ +/* + * Copyright (c) 2008-2010 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C24XX GPIOlib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include + +static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset) +{ + return -EINVAL; +} + +static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long flags; + unsigned long dat; + unsigned long con; + + local_irq_save(flags); + + con = __raw_readl(base + 0x00); + dat = __raw_readl(base + 0x04); + + dat &= ~(1 << offset); + if (value) + dat |= 1 << offset; + + __raw_writel(dat, base + 0x04); + + con &= ~(1 << offset); + + __raw_writel(con, base + 0x00); + __raw_writel(dat, base + 0x04); + + local_irq_restore(flags); + return 0; +} + +static int s3c24xx_gpiolib_bankf_toirq(struct gpio_chip *chip, unsigned offset) +{ + if (offset < 4) + return IRQ_EINT0 + offset; + + if (offset < 8) + return IRQ_EINT4 + offset - 4; + + return -EINVAL; +} + +static struct s3c_gpio_cfg s3c24xx_gpiocfg_banka = { + .set_config = s3c_gpio_setcfg_s3c24xx_a, + .get_config = s3c_gpio_getcfg_s3c24xx_a, +}; + +struct s3c_gpio_cfg s3c24xx_gpiocfg_default = { + .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, +}; + +struct s3c_gpio_chip s3c24xx_gpios[] = { + [0] = { + .base = S3C2410_GPACON, + .pm = __gpio_pm(&s3c_gpio_pm_1bit), + .config = &s3c24xx_gpiocfg_banka, + .chip = { + .base = S3C2410_GPA(0), + .owner = THIS_MODULE, + .label = "GPIOA", + .ngpio = 24, + .direction_input = s3c24xx_gpiolib_banka_input, + .direction_output = s3c24xx_gpiolib_banka_output, + }, + }, + [1] = { + .base = S3C2410_GPBCON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), + .chip = { + .base = S3C2410_GPB(0), + .owner = THIS_MODULE, + .label = "GPIOB", + .ngpio = 16, + }, + }, + [2] = { + .base = S3C2410_GPCCON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), + .chip = { + .base = S3C2410_GPC(0), + .owner = THIS_MODULE, + .label = "GPIOC", + .ngpio = 16, + }, + }, + [3] = { + .base = S3C2410_GPDCON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), + .chip = { + .base = S3C2410_GPD(0), + .owner = THIS_MODULE, + .label = "GPIOD", + .ngpio = 16, + }, + }, + [4] = { + .base = S3C2410_GPECON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), + .chip = { + .base = S3C2410_GPE(0), + .label = "GPIOE", + .owner = THIS_MODULE, + .ngpio = 16, + }, + }, + [5] = { + .base = S3C2410_GPFCON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), + .chip = { + .base = S3C2410_GPF(0), + .owner = THIS_MODULE, + .label = "GPIOF", + .ngpio = 8, + .to_irq = s3c24xx_gpiolib_bankf_toirq, + }, + }, + [6] = { + .base = S3C2410_GPGCON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), + .irq_base = IRQ_EINT8, + .chip = { + .base = S3C2410_GPG(0), + .owner = THIS_MODULE, + .label = "GPIOG", + .ngpio = 16, + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = S3C2410_GPHCON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), + .chip = { + .base = S3C2410_GPH(0), + .owner = THIS_MODULE, + .label = "GPIOH", + .ngpio = 11, + }, + }, + /* GPIOS for the S3C2443 and later devices. */ + { + .base = S3C2440_GPJCON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), + .chip = { + .base = S3C2410_GPJ(0), + .owner = THIS_MODULE, + .label = "GPIOJ", + .ngpio = 16, + }, + }, { + .base = S3C2443_GPKCON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), + .chip = { + .base = S3C2410_GPK(0), + .owner = THIS_MODULE, + .label = "GPIOK", + .ngpio = 16, + }, + }, { + .base = S3C2443_GPLCON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), + .chip = { + .base = S3C2410_GPL(0), + .owner = THIS_MODULE, + .label = "GPIOL", + .ngpio = 15, + }, + }, { + .base = S3C2443_GPMCON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), + .chip = { + .base = S3C2410_GPM(0), + .owner = THIS_MODULE, + .label = "GPIOM", + .ngpio = 2, + }, + }, +}; + +static __init int s3c24xx_gpiolib_init(void) +{ + struct s3c_gpio_chip *chip = s3c24xx_gpios; + int gpn; + + for (gpn = 0; gpn < ARRAY_SIZE(s3c24xx_gpios); gpn++, chip++) { + if (!chip->config) + chip->config = &s3c24xx_gpiocfg_default; + + s3c_gpiolib_add(chip); + } + + return 0; +} +core_initcall(s3c24xx_gpiolib_init); + +/* gpiolib wrappers until these are totally eliminated */ + +void s3c2410_gpio_pullup(unsigned int pin, unsigned int to) +{ + int ret; + + WARN_ON(to); /* should be none of these left */ + + if (!to) { + /* if pull is enabled, try first with up, and if that + * fails, try using down */ + + ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP); + if (ret) + s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN); + } else { + s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE); + } +} +EXPORT_SYMBOL(s3c2410_gpio_pullup); + +void s3c2410_gpio_setpin(unsigned int pin, unsigned int to) +{ + /* do this via gpiolib until all users removed */ + + gpio_request(pin, "temporary"); + gpio_set_value(pin, to); + gpio_free(pin); +} +EXPORT_SYMBOL(s3c2410_gpio_setpin); + +unsigned int s3c2410_gpio_getpin(unsigned int pin) +{ + struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); + unsigned long offs = pin - chip->chip.base; + + return __raw_readl(chip->base + 0x04) & (1<< offs); +} +EXPORT_SYMBOL(s3c2410_gpio_getpin); + +unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change) +{ + unsigned long flags; + unsigned long misccr; + + local_irq_save(flags); + misccr = __raw_readl(S3C24XX_MISCCR); + misccr &= ~clear; + misccr ^= change; + __raw_writel(misccr, S3C24XX_MISCCR); + local_irq_restore(flags); + + return misccr; +} +EXPORT_SYMBOL(s3c2410_modify_misccr); -- cgit v1.2.3-18-g5258 From ec080059c1ce7bfdc8453bf4f3328ac0315a66a1 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Fri, 26 Aug 2011 11:06:25 +0900 Subject: gpio/s3c64xx: move gpio driver into drivers/gpio/ Cc: Ben Dooks Acked-by: Grant Likely Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/Makefile | 1 - arch/arm/mach-s3c64xx/gpiolib.c | 290 ---------------------------------------- drivers/gpio/Kconfig | 4 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-s3c64xx.c | 289 +++++++++++++++++++++++++++++++++++++++ 5 files changed, 294 insertions(+), 291 deletions(-) delete mode 100644 arch/arm/mach-s3c64xx/gpiolib.c create mode 100644 drivers/gpio/gpio-s3c64xx.c diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile index 61b4034a0c2..f0102d7b531 100644 --- a/arch/arm/mach-s3c64xx/Makefile +++ b/arch/arm/mach-s3c64xx/Makefile @@ -13,7 +13,6 @@ obj- := # Core files obj-y += cpu.o obj-y += clock.o -obj-y += gpiolib.o # Core support for S3C6400 system diff --git a/arch/arm/mach-s3c64xx/gpiolib.c b/arch/arm/mach-s3c64xx/gpiolib.c deleted file mode 100644 index 92b09085caa..00000000000 --- a/arch/arm/mach-s3c64xx/gpiolib.c +++ /dev/null @@ -1,290 +0,0 @@ -/* arch/arm/plat-s3c64xx/gpiolib.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * S3C64XX - GPIOlib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include - -#include - -#include -#include -#include -#include - -/* GPIO bank summary: - * - * Bank GPIOs Style SlpCon ExtInt Group - * A 8 4Bit Yes 1 - * B 7 4Bit Yes 1 - * C 8 4Bit Yes 2 - * D 5 4Bit Yes 3 - * E 5 4Bit Yes None - * F 16 2Bit Yes 4 [1] - * G 7 4Bit Yes 5 - * H 10 4Bit[2] Yes 6 - * I 16 2Bit Yes None - * J 12 2Bit Yes None - * K 16 4Bit[2] No None - * L 15 4Bit[2] No None - * M 6 4Bit No IRQ_EINT - * N 16 2Bit No IRQ_EINT - * O 16 2Bit Yes 7 - * P 15 2Bit Yes 8 - * Q 9 2Bit Yes 9 - * - * [1] BANKF pins 14,15 do not form part of the external interrupt sources - * [2] BANK has two control registers, GPxCON0 and GPxCON1 - */ - -static struct s3c_gpio_cfg gpio_4bit_cfg_noint = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .get_config = s3c_gpio_getcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = { - .cfg_eint = 7, - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .get_config = s3c_gpio_getcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = { - .cfg_eint = 3, - .get_config = s3c_gpio_getcfg_s3c64xx_4bit, - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin) -{ - return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO; -} - -static struct s3c_gpio_chip gpio_4bit[] = { - { - .base = S3C64XX_GPA_BASE, - .config = &gpio_4bit_cfg_eint0111, - .chip = { - .base = S3C64XX_GPA(0), - .ngpio = S3C64XX_GPIO_A_NR, - .label = "GPA", - }, - }, { - .base = S3C64XX_GPB_BASE, - .config = &gpio_4bit_cfg_eint0111, - .chip = { - .base = S3C64XX_GPB(0), - .ngpio = S3C64XX_GPIO_B_NR, - .label = "GPB", - }, - }, { - .base = S3C64XX_GPC_BASE, - .config = &gpio_4bit_cfg_eint0111, - .chip = { - .base = S3C64XX_GPC(0), - .ngpio = S3C64XX_GPIO_C_NR, - .label = "GPC", - }, - }, { - .base = S3C64XX_GPD_BASE, - .config = &gpio_4bit_cfg_eint0111, - .chip = { - .base = S3C64XX_GPD(0), - .ngpio = S3C64XX_GPIO_D_NR, - .label = "GPD", - }, - }, { - .base = S3C64XX_GPE_BASE, - .config = &gpio_4bit_cfg_noint, - .chip = { - .base = S3C64XX_GPE(0), - .ngpio = S3C64XX_GPIO_E_NR, - .label = "GPE", - }, - }, { - .base = S3C64XX_GPG_BASE, - .config = &gpio_4bit_cfg_eint0111, - .chip = { - .base = S3C64XX_GPG(0), - .ngpio = S3C64XX_GPIO_G_NR, - .label = "GPG", - }, - }, { - .base = S3C64XX_GPM_BASE, - .config = &gpio_4bit_cfg_eint0011, - .chip = { - .base = S3C64XX_GPM(0), - .ngpio = S3C64XX_GPIO_M_NR, - .label = "GPM", - .to_irq = s3c64xx_gpio2int_gpm, - }, - }, -}; - -static int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin) -{ - return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO; -} - -static struct s3c_gpio_chip gpio_4bit2[] = { - { - .base = S3C64XX_GPH_BASE + 0x4, - .config = &gpio_4bit_cfg_eint0111, - .chip = { - .base = S3C64XX_GPH(0), - .ngpio = S3C64XX_GPIO_H_NR, - .label = "GPH", - }, - }, { - .base = S3C64XX_GPK_BASE + 0x4, - .config = &gpio_4bit_cfg_noint, - .chip = { - .base = S3C64XX_GPK(0), - .ngpio = S3C64XX_GPIO_K_NR, - .label = "GPK", - }, - }, { - .base = S3C64XX_GPL_BASE + 0x4, - .config = &gpio_4bit_cfg_eint0011, - .chip = { - .base = S3C64XX_GPL(0), - .ngpio = S3C64XX_GPIO_L_NR, - .label = "GPL", - .to_irq = s3c64xx_gpio2int_gpl, - }, - }, -}; - -static struct s3c_gpio_cfg gpio_2bit_cfg_noint = { - .set_config = s3c_gpio_setcfg_s3c24xx, - .get_config = s3c_gpio_getcfg_s3c24xx, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = { - .cfg_eint = 2, - .set_config = s3c_gpio_setcfg_s3c24xx, - .get_config = s3c_gpio_getcfg_s3c24xx, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = { - .cfg_eint = 3, - .set_config = s3c_gpio_setcfg_s3c24xx, - .get_config = s3c_gpio_getcfg_s3c24xx, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_chip gpio_2bit[] = { - { - .base = S3C64XX_GPF_BASE, - .config = &gpio_2bit_cfg_eint11, - .chip = { - .base = S3C64XX_GPF(0), - .ngpio = S3C64XX_GPIO_F_NR, - .label = "GPF", - }, - }, { - .base = S3C64XX_GPI_BASE, - .config = &gpio_2bit_cfg_noint, - .chip = { - .base = S3C64XX_GPI(0), - .ngpio = S3C64XX_GPIO_I_NR, - .label = "GPI", - }, - }, { - .base = S3C64XX_GPJ_BASE, - .config = &gpio_2bit_cfg_noint, - .chip = { - .base = S3C64XX_GPJ(0), - .ngpio = S3C64XX_GPIO_J_NR, - .label = "GPJ", - }, - }, { - .base = S3C64XX_GPN_BASE, - .irq_base = IRQ_EINT(0), - .config = &gpio_2bit_cfg_eint10, - .chip = { - .base = S3C64XX_GPN(0), - .ngpio = S3C64XX_GPIO_N_NR, - .label = "GPN", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = S3C64XX_GPO_BASE, - .config = &gpio_2bit_cfg_eint11, - .chip = { - .base = S3C64XX_GPO(0), - .ngpio = S3C64XX_GPIO_O_NR, - .label = "GPO", - }, - }, { - .base = S3C64XX_GPP_BASE, - .config = &gpio_2bit_cfg_eint11, - .chip = { - .base = S3C64XX_GPP(0), - .ngpio = S3C64XX_GPIO_P_NR, - .label = "GPP", - }, - }, { - .base = S3C64XX_GPQ_BASE, - .config = &gpio_2bit_cfg_eint11, - .chip = { - .base = S3C64XX_GPQ(0), - .ngpio = S3C64XX_GPIO_Q_NR, - .label = "GPQ", - }, - }, -}; - -static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip) -{ - chip->pm = __gpio_pm(&s3c_gpio_pm_2bit); -} - -static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips, - int nr_chips, - void (*fn)(struct s3c_gpio_chip *)) -{ - for (; nr_chips > 0; nr_chips--, chips++) { - if (fn) - (fn)(chips); - s3c_gpiolib_add(chips); - } -} - -static __init int s3c64xx_gpiolib_init(void) -{ - s3c64xx_gpiolib_add(gpio_4bit, ARRAY_SIZE(gpio_4bit), - samsung_gpiolib_add_4bit); - - s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2), - samsung_gpiolib_add_4bit2); - - s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit), - s3c64xx_gpiolib_add_2bit); - - return 0; -} - -core_initcall(s3c64xx_gpiolib_init); diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 5654e1b082a..6368730a2e5 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -139,6 +139,10 @@ config GPIO_S3C24XX def_bool y depends on PLAT_S3C24XX +config GPIO_S3C64XX + def_bool y + depends on ARCH_S3C64XX + config GPIO_S5PC100 def_bool y depends on CPU_S5PC100 diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index c7f1c00986c..8c1fb23285c 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o obj-$(CONFIG_GPIO_PLAT_SAMSUNG) += gpio-plat-samsung.o obj-$(CONFIG_GPIO_S3C24XX) += gpio-s3c24xx.o +obj-$(CONFIG_GPIO_S3C64XX) += gpio-s3c64xx.o obj-$(CONFIG_GPIO_S5PC100) += gpio-s5pc100.o obj-$(CONFIG_GPIO_S5PV210) += gpio-s5pv210.o diff --git a/drivers/gpio/gpio-s3c64xx.c b/drivers/gpio/gpio-s3c64xx.c new file mode 100644 index 00000000000..b4f1c8204f0 --- /dev/null +++ b/drivers/gpio/gpio-s3c64xx.c @@ -0,0 +1,289 @@ +/* + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks + * http://armlinux.simtec.co.uk/ + * + * S3C64XX - GPIOlib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#include + +#include +#include +#include +#include + +/* GPIO bank summary: + * + * Bank GPIOs Style SlpCon ExtInt Group + * A 8 4Bit Yes 1 + * B 7 4Bit Yes 1 + * C 8 4Bit Yes 2 + * D 5 4Bit Yes 3 + * E 5 4Bit Yes None + * F 16 2Bit Yes 4 [1] + * G 7 4Bit Yes 5 + * H 10 4Bit[2] Yes 6 + * I 16 2Bit Yes None + * J 12 2Bit Yes None + * K 16 4Bit[2] No None + * L 15 4Bit[2] No None + * M 6 4Bit No IRQ_EINT + * N 16 2Bit No IRQ_EINT + * O 16 2Bit Yes 7 + * P 15 2Bit Yes 8 + * Q 9 2Bit Yes 9 + * + * [1] BANKF pins 14,15 do not form part of the external interrupt sources + * [2] BANK has two control registers, GPxCON0 and GPxCON1 + */ + +static struct s3c_gpio_cfg gpio_4bit_cfg_noint = { + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .get_config = s3c_gpio_getcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = { + .cfg_eint = 7, + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .get_config = s3c_gpio_getcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = { + .cfg_eint = 3, + .get_config = s3c_gpio_getcfg_s3c64xx_4bit, + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin) +{ + return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO; +} + +static struct s3c_gpio_chip gpio_4bit[] = { + { + .base = S3C64XX_GPA_BASE, + .config = &gpio_4bit_cfg_eint0111, + .chip = { + .base = S3C64XX_GPA(0), + .ngpio = S3C64XX_GPIO_A_NR, + .label = "GPA", + }, + }, { + .base = S3C64XX_GPB_BASE, + .config = &gpio_4bit_cfg_eint0111, + .chip = { + .base = S3C64XX_GPB(0), + .ngpio = S3C64XX_GPIO_B_NR, + .label = "GPB", + }, + }, { + .base = S3C64XX_GPC_BASE, + .config = &gpio_4bit_cfg_eint0111, + .chip = { + .base = S3C64XX_GPC(0), + .ngpio = S3C64XX_GPIO_C_NR, + .label = "GPC", + }, + }, { + .base = S3C64XX_GPD_BASE, + .config = &gpio_4bit_cfg_eint0111, + .chip = { + .base = S3C64XX_GPD(0), + .ngpio = S3C64XX_GPIO_D_NR, + .label = "GPD", + }, + }, { + .base = S3C64XX_GPE_BASE, + .config = &gpio_4bit_cfg_noint, + .chip = { + .base = S3C64XX_GPE(0), + .ngpio = S3C64XX_GPIO_E_NR, + .label = "GPE", + }, + }, { + .base = S3C64XX_GPG_BASE, + .config = &gpio_4bit_cfg_eint0111, + .chip = { + .base = S3C64XX_GPG(0), + .ngpio = S3C64XX_GPIO_G_NR, + .label = "GPG", + }, + }, { + .base = S3C64XX_GPM_BASE, + .config = &gpio_4bit_cfg_eint0011, + .chip = { + .base = S3C64XX_GPM(0), + .ngpio = S3C64XX_GPIO_M_NR, + .label = "GPM", + .to_irq = s3c64xx_gpio2int_gpm, + }, + }, +}; + +static int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin) +{ + return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO; +} + +static struct s3c_gpio_chip gpio_4bit2[] = { + { + .base = S3C64XX_GPH_BASE + 0x4, + .config = &gpio_4bit_cfg_eint0111, + .chip = { + .base = S3C64XX_GPH(0), + .ngpio = S3C64XX_GPIO_H_NR, + .label = "GPH", + }, + }, { + .base = S3C64XX_GPK_BASE + 0x4, + .config = &gpio_4bit_cfg_noint, + .chip = { + .base = S3C64XX_GPK(0), + .ngpio = S3C64XX_GPIO_K_NR, + .label = "GPK", + }, + }, { + .base = S3C64XX_GPL_BASE + 0x4, + .config = &gpio_4bit_cfg_eint0011, + .chip = { + .base = S3C64XX_GPL(0), + .ngpio = S3C64XX_GPIO_L_NR, + .label = "GPL", + .to_irq = s3c64xx_gpio2int_gpl, + }, + }, +}; + +static struct s3c_gpio_cfg gpio_2bit_cfg_noint = { + .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = { + .cfg_eint = 2, + .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = { + .cfg_eint = 3, + .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_chip gpio_2bit[] = { + { + .base = S3C64XX_GPF_BASE, + .config = &gpio_2bit_cfg_eint11, + .chip = { + .base = S3C64XX_GPF(0), + .ngpio = S3C64XX_GPIO_F_NR, + .label = "GPF", + }, + }, { + .base = S3C64XX_GPI_BASE, + .config = &gpio_2bit_cfg_noint, + .chip = { + .base = S3C64XX_GPI(0), + .ngpio = S3C64XX_GPIO_I_NR, + .label = "GPI", + }, + }, { + .base = S3C64XX_GPJ_BASE, + .config = &gpio_2bit_cfg_noint, + .chip = { + .base = S3C64XX_GPJ(0), + .ngpio = S3C64XX_GPIO_J_NR, + .label = "GPJ", + }, + }, { + .base = S3C64XX_GPN_BASE, + .irq_base = IRQ_EINT(0), + .config = &gpio_2bit_cfg_eint10, + .chip = { + .base = S3C64XX_GPN(0), + .ngpio = S3C64XX_GPIO_N_NR, + .label = "GPN", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = S3C64XX_GPO_BASE, + .config = &gpio_2bit_cfg_eint11, + .chip = { + .base = S3C64XX_GPO(0), + .ngpio = S3C64XX_GPIO_O_NR, + .label = "GPO", + }, + }, { + .base = S3C64XX_GPP_BASE, + .config = &gpio_2bit_cfg_eint11, + .chip = { + .base = S3C64XX_GPP(0), + .ngpio = S3C64XX_GPIO_P_NR, + .label = "GPP", + }, + }, { + .base = S3C64XX_GPQ_BASE, + .config = &gpio_2bit_cfg_eint11, + .chip = { + .base = S3C64XX_GPQ(0), + .ngpio = S3C64XX_GPIO_Q_NR, + .label = "GPQ", + }, + }, +}; + +static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip) +{ + chip->pm = __gpio_pm(&s3c_gpio_pm_2bit); +} + +static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips, + int nr_chips, + void (*fn)(struct s3c_gpio_chip *)) +{ + for (; nr_chips > 0; nr_chips--, chips++) { + if (fn) + (fn)(chips); + s3c_gpiolib_add(chips); + } +} + +static __init int s3c64xx_gpiolib_init(void) +{ + s3c64xx_gpiolib_add(gpio_4bit, ARRAY_SIZE(gpio_4bit), + samsung_gpiolib_add_4bit); + + s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2), + samsung_gpiolib_add_4bit2); + + s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit), + s3c64xx_gpiolib_add_2bit); + + return 0; +} + +core_initcall(s3c64xx_gpiolib_init); -- cgit v1.2.3-18-g5258 From c4b3fd38dfb677d7a3997527c9cbdc21b81424a3 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Fri, 26 Aug 2011 11:07:26 +0900 Subject: gpio/s5p64x0: move gpio driver into drivers/gpio/ Acked-by: Grant Likely Signed-off-by: Kukjin Kim --- arch/arm/mach-s5p64x0/Makefile | 2 +- arch/arm/mach-s5p64x0/gpiolib.c | 511 ---------------------------------------- drivers/gpio/Kconfig | 4 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-s5p64x0.c | 510 +++++++++++++++++++++++++++++++++++++++ 5 files changed, 516 insertions(+), 512 deletions(-) delete mode 100644 arch/arm/mach-s5p64x0/gpiolib.c create mode 100644 drivers/gpio/gpio-s5p64x0.c diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile index 5f6afdf067e..5b949553883 100644 --- a/arch/arm/mach-s5p64x0/Makefile +++ b/arch/arm/mach-s5p64x0/Makefile @@ -12,7 +12,7 @@ obj- := # Core support for S5P64X0 system -obj-$(CONFIG_ARCH_S5P64X0) += cpu.o init.o clock.o dma.o gpiolib.o +obj-$(CONFIG_ARCH_S5P64X0) += cpu.o init.o clock.o dma.o obj-$(CONFIG_ARCH_S5P64X0) += setup-i2c0.o irq-eint.o obj-$(CONFIG_CPU_S5P6440) += clock-s5p6440.o obj-$(CONFIG_CPU_S5P6450) += clock-s5p6450.o diff --git a/arch/arm/mach-s5p64x0/gpiolib.c b/arch/arm/mach-s5p64x0/gpiolib.c deleted file mode 100644 index e7fb3b004e7..00000000000 --- a/arch/arm/mach-s5p64x0/gpiolib.c +++ /dev/null @@ -1,511 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/gpiolib.c - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - GPIOlib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -/* - * S5P6440 GPIO bank summary: - * - * Bank GPIOs Style SlpCon ExtInt Group - * A 6 4Bit Yes 1 - * B 7 4Bit Yes 1 - * C 8 4Bit Yes 2 - * F 2 2Bit Yes 4 [1] - * G 7 4Bit Yes 5 - * H 10 4Bit[2] Yes 6 - * I 16 2Bit Yes None - * J 12 2Bit Yes None - * N 16 2Bit No IRQ_EINT - * P 8 2Bit Yes 8 - * R 15 4Bit[2] Yes 8 - * - * S5P6450 GPIO bank summary: - * - * Bank GPIOs Style SlpCon ExtInt Group - * A 6 4Bit Yes 1 - * B 7 4Bit Yes 1 - * C 8 4Bit Yes 2 - * D 8 4Bit Yes None - * F 2 2Bit Yes None - * G 14 4Bit[2] Yes 5 - * H 10 4Bit[2] Yes 6 - * I 16 2Bit Yes None - * J 12 2Bit Yes None - * K 5 4Bit Yes None - * N 16 2Bit No IRQ_EINT - * P 11 2Bit Yes 8 - * Q 14 2Bit Yes None - * R 15 4Bit[2] Yes None - * S 8 2Bit Yes None - * - * [1] BANKF pins 14,15 do not form part of the external interrupt sources - * [2] BANK has two control registers, GPxCON0 and GPxCON1 - */ - -static int s5p64x0_gpiolib_rbank_4bit2_input(struct gpio_chip *chip, - unsigned int offset) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - void __iomem *regcon = base; - unsigned long con; - unsigned long flags; - - switch (offset) { - case 6: - offset += 1; - case 0: - case 1: - case 2: - case 3: - case 4: - case 5: - regcon -= 4; - break; - default: - offset -= 7; - break; - } - - s3c_gpio_lock(ourchip, flags); - - con = __raw_readl(regcon); - con &= ~(0xf << con_4bit_shift(offset)); - __raw_writel(con, regcon); - - s3c_gpio_unlock(ourchip, flags); - - return 0; -} - -static int s5p64x0_gpiolib_rbank_4bit2_output(struct gpio_chip *chip, - unsigned int offset, int value) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - void __iomem *regcon = base; - unsigned long con; - unsigned long dat; - unsigned long flags; - unsigned con_offset = offset; - - switch (con_offset) { - case 6: - con_offset += 1; - case 0: - case 1: - case 2: - case 3: - case 4: - case 5: - regcon -= 4; - break; - default: - con_offset -= 7; - break; - } - - s3c_gpio_lock(ourchip, flags); - - con = __raw_readl(regcon); - con &= ~(0xf << con_4bit_shift(con_offset)); - con |= 0x1 << con_4bit_shift(con_offset); - - dat = __raw_readl(base + GPIODAT_OFF); - if (value) - dat |= 1 << offset; - else - dat &= ~(1 << offset); - - __raw_writel(con, regcon); - __raw_writel(dat, base + GPIODAT_OFF); - - s3c_gpio_unlock(ourchip, flags); - - return 0; -} - -int s5p64x0_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip, - unsigned int off, unsigned int cfg) -{ - void __iomem *reg = chip->base; - unsigned int shift; - u32 con; - - switch (off) { - case 0: - case 1: - case 2: - case 3: - case 4: - case 5: - shift = (off & 7) * 4; - reg -= 4; - break; - case 6: - shift = ((off + 1) & 7) * 4; - reg -= 4; - default: - shift = ((off + 1) & 7) * 4; - break; - } - - if (s3c_gpio_is_cfg_special(cfg)) { - cfg &= 0xf; - cfg <<= shift; - } - - con = __raw_readl(reg); - con &= ~(0xf << shift); - con |= cfg; - __raw_writel(con, reg); - - return 0; -} - -static struct s3c_gpio_cfg s5p64x0_gpio_cfgs[] = { - { - .cfg_eint = 0, - }, { - .cfg_eint = 7, - }, { - .cfg_eint = 3, - .set_config = s5p64x0_gpio_setcfg_4bit_rbank, - }, { - .cfg_eint = 0, - .set_config = s3c_gpio_setcfg_s3c24xx, - .get_config = s3c_gpio_getcfg_s3c24xx, - }, { - .cfg_eint = 2, - .set_config = s3c_gpio_setcfg_s3c24xx, - .get_config = s3c_gpio_getcfg_s3c24xx, - }, { - .cfg_eint = 3, - .set_config = s3c_gpio_setcfg_s3c24xx, - .get_config = s3c_gpio_getcfg_s3c24xx, - }, -}; - -static struct s3c_gpio_chip s5p6440_gpio_4bit[] = { - { - .base = S5P64X0_GPA_BASE, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6440_GPA(0), - .ngpio = S5P6440_GPIO_A_NR, - .label = "GPA", - }, - }, { - .base = S5P64X0_GPB_BASE, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6440_GPB(0), - .ngpio = S5P6440_GPIO_B_NR, - .label = "GPB", - }, - }, { - .base = S5P64X0_GPC_BASE, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6440_GPC(0), - .ngpio = S5P6440_GPIO_C_NR, - .label = "GPC", - }, - }, { - .base = S5P64X0_GPG_BASE, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6440_GPG(0), - .ngpio = S5P6440_GPIO_G_NR, - .label = "GPG", - }, - }, -}; - -static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = { - { - .base = S5P64X0_GPH_BASE + 0x4, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6440_GPH(0), - .ngpio = S5P6440_GPIO_H_NR, - .label = "GPH", - }, - }, -}; - -static struct s3c_gpio_chip s5p6440_gpio_rbank_4bit2[] = { - { - .base = S5P64X0_GPR_BASE + 0x4, - .config = &s5p64x0_gpio_cfgs[2], - .chip = { - .base = S5P6440_GPR(0), - .ngpio = S5P6440_GPIO_R_NR, - .label = "GPR", - }, - }, -}; - -static struct s3c_gpio_chip s5p6440_gpio_2bit[] = { - { - .base = S5P64X0_GPF_BASE, - .config = &s5p64x0_gpio_cfgs[5], - .chip = { - .base = S5P6440_GPF(0), - .ngpio = S5P6440_GPIO_F_NR, - .label = "GPF", - }, - }, { - .base = S5P64X0_GPI_BASE, - .config = &s5p64x0_gpio_cfgs[3], - .chip = { - .base = S5P6440_GPI(0), - .ngpio = S5P6440_GPIO_I_NR, - .label = "GPI", - }, - }, { - .base = S5P64X0_GPJ_BASE, - .config = &s5p64x0_gpio_cfgs[3], - .chip = { - .base = S5P6440_GPJ(0), - .ngpio = S5P6440_GPIO_J_NR, - .label = "GPJ", - }, - }, { - .base = S5P64X0_GPN_BASE, - .config = &s5p64x0_gpio_cfgs[4], - .chip = { - .base = S5P6440_GPN(0), - .ngpio = S5P6440_GPIO_N_NR, - .label = "GPN", - }, - }, { - .base = S5P64X0_GPP_BASE, - .config = &s5p64x0_gpio_cfgs[5], - .chip = { - .base = S5P6440_GPP(0), - .ngpio = S5P6440_GPIO_P_NR, - .label = "GPP", - }, - }, -}; - -static struct s3c_gpio_chip s5p6450_gpio_4bit[] = { - { - .base = S5P64X0_GPA_BASE, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6450_GPA(0), - .ngpio = S5P6450_GPIO_A_NR, - .label = "GPA", - }, - }, { - .base = S5P64X0_GPB_BASE, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6450_GPB(0), - .ngpio = S5P6450_GPIO_B_NR, - .label = "GPB", - }, - }, { - .base = S5P64X0_GPC_BASE, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6450_GPC(0), - .ngpio = S5P6450_GPIO_C_NR, - .label = "GPC", - }, - }, { - .base = S5P6450_GPD_BASE, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6450_GPD(0), - .ngpio = S5P6450_GPIO_D_NR, - .label = "GPD", - }, - }, { - .base = S5P6450_GPK_BASE, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6450_GPK(0), - .ngpio = S5P6450_GPIO_K_NR, - .label = "GPK", - }, - }, -}; - -static struct s3c_gpio_chip s5p6450_gpio_4bit2[] = { - { - .base = S5P64X0_GPG_BASE + 0x4, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6450_GPG(0), - .ngpio = S5P6450_GPIO_G_NR, - .label = "GPG", - }, - }, { - .base = S5P64X0_GPH_BASE + 0x4, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6450_GPH(0), - .ngpio = S5P6450_GPIO_H_NR, - .label = "GPH", - }, - }, -}; - -static struct s3c_gpio_chip s5p6450_gpio_rbank_4bit2[] = { - { - .base = S5P64X0_GPR_BASE + 0x4, - .config = &s5p64x0_gpio_cfgs[2], - .chip = { - .base = S5P6450_GPR(0), - .ngpio = S5P6450_GPIO_R_NR, - .label = "GPR", - }, - }, -}; - -static struct s3c_gpio_chip s5p6450_gpio_2bit[] = { - { - .base = S5P64X0_GPF_BASE, - .config = &s5p64x0_gpio_cfgs[5], - .chip = { - .base = S5P6450_GPF(0), - .ngpio = S5P6450_GPIO_F_NR, - .label = "GPF", - }, - }, { - .base = S5P64X0_GPI_BASE, - .config = &s5p64x0_gpio_cfgs[3], - .chip = { - .base = S5P6450_GPI(0), - .ngpio = S5P6450_GPIO_I_NR, - .label = "GPI", - }, - }, { - .base = S5P64X0_GPJ_BASE, - .config = &s5p64x0_gpio_cfgs[3], - .chip = { - .base = S5P6450_GPJ(0), - .ngpio = S5P6450_GPIO_J_NR, - .label = "GPJ", - }, - }, { - .base = S5P64X0_GPN_BASE, - .config = &s5p64x0_gpio_cfgs[4], - .chip = { - .base = S5P6450_GPN(0), - .ngpio = S5P6450_GPIO_N_NR, - .label = "GPN", - }, - }, { - .base = S5P64X0_GPP_BASE, - .config = &s5p64x0_gpio_cfgs[5], - .chip = { - .base = S5P6450_GPP(0), - .ngpio = S5P6450_GPIO_P_NR, - .label = "GPP", - }, - }, { - .base = S5P6450_GPQ_BASE, - .config = &s5p64x0_gpio_cfgs[4], - .chip = { - .base = S5P6450_GPQ(0), - .ngpio = S5P6450_GPIO_Q_NR, - .label = "GPQ", - }, - }, { - .base = S5P6450_GPS_BASE, - .config = &s5p64x0_gpio_cfgs[5], - .chip = { - .base = S5P6450_GPS(0), - .ngpio = S5P6450_GPIO_S_NR, - .label = "GPS", - }, - }, -}; - -void __init s5p64x0_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips) -{ - for (; nr_chips > 0; nr_chips--, chipcfg++) { - if (!chipcfg->set_config) - chipcfg->set_config = s3c_gpio_setcfg_s3c64xx_4bit; - if (!chipcfg->get_config) - chipcfg->get_config = s3c_gpio_getcfg_s3c64xx_4bit; - if (!chipcfg->set_pull) - chipcfg->set_pull = s3c_gpio_setpull_updown; - if (!chipcfg->get_pull) - chipcfg->get_pull = s3c_gpio_getpull_updown; - } -} - -static void __init s5p64x0_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip, - int nr_chips) -{ - for (; nr_chips > 0; nr_chips--, chip++) { - chip->chip.direction_input = s5p64x0_gpiolib_rbank_4bit2_input; - chip->chip.direction_output = - s5p64x0_gpiolib_rbank_4bit2_output; - s3c_gpiolib_add(chip); - } -} - -static int __init s5p64x0_gpiolib_init(void) -{ - unsigned int chipid; - - chipid = __raw_readl(S5P64X0_SYS_ID); - - s5p64x0_gpiolib_set_cfg(s5p64x0_gpio_cfgs, - ARRAY_SIZE(s5p64x0_gpio_cfgs)); - - if ((chipid & 0xff000) == 0x50000) { - samsung_gpiolib_add_2bit_chips(s5p6450_gpio_2bit, - ARRAY_SIZE(s5p6450_gpio_2bit)); - - samsung_gpiolib_add_4bit_chips(s5p6450_gpio_4bit, - ARRAY_SIZE(s5p6450_gpio_4bit)); - - samsung_gpiolib_add_4bit2_chips(s5p6450_gpio_4bit2, - ARRAY_SIZE(s5p6450_gpio_4bit2)); - - s5p64x0_gpio_add_rbank_4bit2(s5p6450_gpio_rbank_4bit2, - ARRAY_SIZE(s5p6450_gpio_rbank_4bit2)); - } else { - samsung_gpiolib_add_2bit_chips(s5p6440_gpio_2bit, - ARRAY_SIZE(s5p6440_gpio_2bit)); - - samsung_gpiolib_add_4bit_chips(s5p6440_gpio_4bit, - ARRAY_SIZE(s5p6440_gpio_4bit)); - - samsung_gpiolib_add_4bit2_chips(s5p6440_gpio_4bit2, - ARRAY_SIZE(s5p6440_gpio_4bit2)); - - s5p64x0_gpio_add_rbank_4bit2(s5p6440_gpio_rbank_4bit2, - ARRAY_SIZE(s5p6440_gpio_rbank_4bit2)); - } - - return 0; -} -core_initcall(s5p64x0_gpiolib_init); diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 6368730a2e5..5eb29bc18a5 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -143,6 +143,10 @@ config GPIO_S3C64XX def_bool y depends on ARCH_S3C64XX +config GPIO_S5P64X0 + def_bool y + depends on ARCH_S5P64X0 + config GPIO_S5PC100 def_bool y depends on CPU_S5PC100 diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 8c1fb23285c..10f3bbf0ece 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -42,6 +42,7 @@ obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o obj-$(CONFIG_GPIO_PLAT_SAMSUNG) += gpio-plat-samsung.o obj-$(CONFIG_GPIO_S3C24XX) += gpio-s3c24xx.o obj-$(CONFIG_GPIO_S3C64XX) += gpio-s3c64xx.o +obj-$(CONFIG_GPIO_S5P64X0) += gpio-s5p64x0.o obj-$(CONFIG_GPIO_S5PC100) += gpio-s5pc100.o obj-$(CONFIG_GPIO_S5PV210) += gpio-s5pv210.o diff --git a/drivers/gpio/gpio-s5p64x0.c b/drivers/gpio/gpio-s5p64x0.c new file mode 100644 index 00000000000..96e816f5cc9 --- /dev/null +++ b/drivers/gpio/gpio-s5p64x0.c @@ -0,0 +1,510 @@ +/* + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 - GPIOlib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +/* + * S5P6440 GPIO bank summary: + * + * Bank GPIOs Style SlpCon ExtInt Group + * A 6 4Bit Yes 1 + * B 7 4Bit Yes 1 + * C 8 4Bit Yes 2 + * F 2 2Bit Yes 4 [1] + * G 7 4Bit Yes 5 + * H 10 4Bit[2] Yes 6 + * I 16 2Bit Yes None + * J 12 2Bit Yes None + * N 16 2Bit No IRQ_EINT + * P 8 2Bit Yes 8 + * R 15 4Bit[2] Yes 8 + * + * S5P6450 GPIO bank summary: + * + * Bank GPIOs Style SlpCon ExtInt Group + * A 6 4Bit Yes 1 + * B 7 4Bit Yes 1 + * C 8 4Bit Yes 2 + * D 8 4Bit Yes None + * F 2 2Bit Yes None + * G 14 4Bit[2] Yes 5 + * H 10 4Bit[2] Yes 6 + * I 16 2Bit Yes None + * J 12 2Bit Yes None + * K 5 4Bit Yes None + * N 16 2Bit No IRQ_EINT + * P 11 2Bit Yes 8 + * Q 14 2Bit Yes None + * R 15 4Bit[2] Yes None + * S 8 2Bit Yes None + * + * [1] BANKF pins 14,15 do not form part of the external interrupt sources + * [2] BANK has two control registers, GPxCON0 and GPxCON1 + */ + +static int s5p64x0_gpiolib_rbank_4bit2_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + void __iomem *regcon = base; + unsigned long con; + unsigned long flags; + + switch (offset) { + case 6: + offset += 1; + case 0: + case 1: + case 2: + case 3: + case 4: + case 5: + regcon -= 4; + break; + default: + offset -= 7; + break; + } + + s3c_gpio_lock(ourchip, flags); + + con = __raw_readl(regcon); + con &= ~(0xf << con_4bit_shift(offset)); + __raw_writel(con, regcon); + + s3c_gpio_unlock(ourchip, flags); + + return 0; +} + +static int s5p64x0_gpiolib_rbank_4bit2_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + void __iomem *regcon = base; + unsigned long con; + unsigned long dat; + unsigned long flags; + unsigned con_offset = offset; + + switch (con_offset) { + case 6: + con_offset += 1; + case 0: + case 1: + case 2: + case 3: + case 4: + case 5: + regcon -= 4; + break; + default: + con_offset -= 7; + break; + } + + s3c_gpio_lock(ourchip, flags); + + con = __raw_readl(regcon); + con &= ~(0xf << con_4bit_shift(con_offset)); + con |= 0x1 << con_4bit_shift(con_offset); + + dat = __raw_readl(base + GPIODAT_OFF); + if (value) + dat |= 1 << offset; + else + dat &= ~(1 << offset); + + __raw_writel(con, regcon); + __raw_writel(dat, base + GPIODAT_OFF); + + s3c_gpio_unlock(ourchip, flags); + + return 0; +} + +int s5p64x0_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg) +{ + void __iomem *reg = chip->base; + unsigned int shift; + u32 con; + + switch (off) { + case 0: + case 1: + case 2: + case 3: + case 4: + case 5: + shift = (off & 7) * 4; + reg -= 4; + break; + case 6: + shift = ((off + 1) & 7) * 4; + reg -= 4; + default: + shift = ((off + 1) & 7) * 4; + break; + } + + if (s3c_gpio_is_cfg_special(cfg)) { + cfg &= 0xf; + cfg <<= shift; + } + + con = __raw_readl(reg); + con &= ~(0xf << shift); + con |= cfg; + __raw_writel(con, reg); + + return 0; +} + +static struct s3c_gpio_cfg s5p64x0_gpio_cfgs[] = { + { + .cfg_eint = 0, + }, { + .cfg_eint = 7, + }, { + .cfg_eint = 3, + .set_config = s5p64x0_gpio_setcfg_4bit_rbank, + }, { + .cfg_eint = 0, + .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, + }, { + .cfg_eint = 2, + .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, + }, { + .cfg_eint = 3, + .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, + }, +}; + +static struct s3c_gpio_chip s5p6440_gpio_4bit[] = { + { + .base = S5P64X0_GPA_BASE, + .config = &s5p64x0_gpio_cfgs[1], + .chip = { + .base = S5P6440_GPA(0), + .ngpio = S5P6440_GPIO_A_NR, + .label = "GPA", + }, + }, { + .base = S5P64X0_GPB_BASE, + .config = &s5p64x0_gpio_cfgs[1], + .chip = { + .base = S5P6440_GPB(0), + .ngpio = S5P6440_GPIO_B_NR, + .label = "GPB", + }, + }, { + .base = S5P64X0_GPC_BASE, + .config = &s5p64x0_gpio_cfgs[1], + .chip = { + .base = S5P6440_GPC(0), + .ngpio = S5P6440_GPIO_C_NR, + .label = "GPC", + }, + }, { + .base = S5P64X0_GPG_BASE, + .config = &s5p64x0_gpio_cfgs[1], + .chip = { + .base = S5P6440_GPG(0), + .ngpio = S5P6440_GPIO_G_NR, + .label = "GPG", + }, + }, +}; + +static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = { + { + .base = S5P64X0_GPH_BASE + 0x4, + .config = &s5p64x0_gpio_cfgs[1], + .chip = { + .base = S5P6440_GPH(0), + .ngpio = S5P6440_GPIO_H_NR, + .label = "GPH", + }, + }, +}; + +static struct s3c_gpio_chip s5p6440_gpio_rbank_4bit2[] = { + { + .base = S5P64X0_GPR_BASE + 0x4, + .config = &s5p64x0_gpio_cfgs[2], + .chip = { + .base = S5P6440_GPR(0), + .ngpio = S5P6440_GPIO_R_NR, + .label = "GPR", + }, + }, +}; + +static struct s3c_gpio_chip s5p6440_gpio_2bit[] = { + { + .base = S5P64X0_GPF_BASE, + .config = &s5p64x0_gpio_cfgs[5], + .chip = { + .base = S5P6440_GPF(0), + .ngpio = S5P6440_GPIO_F_NR, + .label = "GPF", + }, + }, { + .base = S5P64X0_GPI_BASE, + .config = &s5p64x0_gpio_cfgs[3], + .chip = { + .base = S5P6440_GPI(0), + .ngpio = S5P6440_GPIO_I_NR, + .label = "GPI", + }, + }, { + .base = S5P64X0_GPJ_BASE, + .config = &s5p64x0_gpio_cfgs[3], + .chip = { + .base = S5P6440_GPJ(0), + .ngpio = S5P6440_GPIO_J_NR, + .label = "GPJ", + }, + }, { + .base = S5P64X0_GPN_BASE, + .config = &s5p64x0_gpio_cfgs[4], + .chip = { + .base = S5P6440_GPN(0), + .ngpio = S5P6440_GPIO_N_NR, + .label = "GPN", + }, + }, { + .base = S5P64X0_GPP_BASE, + .config = &s5p64x0_gpio_cfgs[5], + .chip = { + .base = S5P6440_GPP(0), + .ngpio = S5P6440_GPIO_P_NR, + .label = "GPP", + }, + }, +}; + +static struct s3c_gpio_chip s5p6450_gpio_4bit[] = { + { + .base = S5P64X0_GPA_BASE, + .config = &s5p64x0_gpio_cfgs[1], + .chip = { + .base = S5P6450_GPA(0), + .ngpio = S5P6450_GPIO_A_NR, + .label = "GPA", + }, + }, { + .base = S5P64X0_GPB_BASE, + .config = &s5p64x0_gpio_cfgs[1], + .chip = { + .base = S5P6450_GPB(0), + .ngpio = S5P6450_GPIO_B_NR, + .label = "GPB", + }, + }, { + .base = S5P64X0_GPC_BASE, + .config = &s5p64x0_gpio_cfgs[1], + .chip = { + .base = S5P6450_GPC(0), + .ngpio = S5P6450_GPIO_C_NR, + .label = "GPC", + }, + }, { + .base = S5P6450_GPD_BASE, + .config = &s5p64x0_gpio_cfgs[1], + .chip = { + .base = S5P6450_GPD(0), + .ngpio = S5P6450_GPIO_D_NR, + .label = "GPD", + }, + }, { + .base = S5P6450_GPK_BASE, + .config = &s5p64x0_gpio_cfgs[1], + .chip = { + .base = S5P6450_GPK(0), + .ngpio = S5P6450_GPIO_K_NR, + .label = "GPK", + }, + }, +}; + +static struct s3c_gpio_chip s5p6450_gpio_4bit2[] = { + { + .base = S5P64X0_GPG_BASE + 0x4, + .config = &s5p64x0_gpio_cfgs[1], + .chip = { + .base = S5P6450_GPG(0), + .ngpio = S5P6450_GPIO_G_NR, + .label = "GPG", + }, + }, { + .base = S5P64X0_GPH_BASE + 0x4, + .config = &s5p64x0_gpio_cfgs[1], + .chip = { + .base = S5P6450_GPH(0), + .ngpio = S5P6450_GPIO_H_NR, + .label = "GPH", + }, + }, +}; + +static struct s3c_gpio_chip s5p6450_gpio_rbank_4bit2[] = { + { + .base = S5P64X0_GPR_BASE + 0x4, + .config = &s5p64x0_gpio_cfgs[2], + .chip = { + .base = S5P6450_GPR(0), + .ngpio = S5P6450_GPIO_R_NR, + .label = "GPR", + }, + }, +}; + +static struct s3c_gpio_chip s5p6450_gpio_2bit[] = { + { + .base = S5P64X0_GPF_BASE, + .config = &s5p64x0_gpio_cfgs[5], + .chip = { + .base = S5P6450_GPF(0), + .ngpio = S5P6450_GPIO_F_NR, + .label = "GPF", + }, + }, { + .base = S5P64X0_GPI_BASE, + .config = &s5p64x0_gpio_cfgs[3], + .chip = { + .base = S5P6450_GPI(0), + .ngpio = S5P6450_GPIO_I_NR, + .label = "GPI", + }, + }, { + .base = S5P64X0_GPJ_BASE, + .config = &s5p64x0_gpio_cfgs[3], + .chip = { + .base = S5P6450_GPJ(0), + .ngpio = S5P6450_GPIO_J_NR, + .label = "GPJ", + }, + }, { + .base = S5P64X0_GPN_BASE, + .config = &s5p64x0_gpio_cfgs[4], + .chip = { + .base = S5P6450_GPN(0), + .ngpio = S5P6450_GPIO_N_NR, + .label = "GPN", + }, + }, { + .base = S5P64X0_GPP_BASE, + .config = &s5p64x0_gpio_cfgs[5], + .chip = { + .base = S5P6450_GPP(0), + .ngpio = S5P6450_GPIO_P_NR, + .label = "GPP", + }, + }, { + .base = S5P6450_GPQ_BASE, + .config = &s5p64x0_gpio_cfgs[4], + .chip = { + .base = S5P6450_GPQ(0), + .ngpio = S5P6450_GPIO_Q_NR, + .label = "GPQ", + }, + }, { + .base = S5P6450_GPS_BASE, + .config = &s5p64x0_gpio_cfgs[5], + .chip = { + .base = S5P6450_GPS(0), + .ngpio = S5P6450_GPIO_S_NR, + .label = "GPS", + }, + }, +}; + +void __init s5p64x0_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips) +{ + for (; nr_chips > 0; nr_chips--, chipcfg++) { + if (!chipcfg->set_config) + chipcfg->set_config = s3c_gpio_setcfg_s3c64xx_4bit; + if (!chipcfg->get_config) + chipcfg->get_config = s3c_gpio_getcfg_s3c64xx_4bit; + if (!chipcfg->set_pull) + chipcfg->set_pull = s3c_gpio_setpull_updown; + if (!chipcfg->get_pull) + chipcfg->get_pull = s3c_gpio_getpull_updown; + } +} + +static void __init s5p64x0_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip, + int nr_chips) +{ + for (; nr_chips > 0; nr_chips--, chip++) { + chip->chip.direction_input = s5p64x0_gpiolib_rbank_4bit2_input; + chip->chip.direction_output = + s5p64x0_gpiolib_rbank_4bit2_output; + s3c_gpiolib_add(chip); + } +} + +static int __init s5p64x0_gpiolib_init(void) +{ + unsigned int chipid; + + chipid = __raw_readl(S5P64X0_SYS_ID); + + s5p64x0_gpiolib_set_cfg(s5p64x0_gpio_cfgs, + ARRAY_SIZE(s5p64x0_gpio_cfgs)); + + if ((chipid & 0xff000) == 0x50000) { + samsung_gpiolib_add_2bit_chips(s5p6450_gpio_2bit, + ARRAY_SIZE(s5p6450_gpio_2bit)); + + samsung_gpiolib_add_4bit_chips(s5p6450_gpio_4bit, + ARRAY_SIZE(s5p6450_gpio_4bit)); + + samsung_gpiolib_add_4bit2_chips(s5p6450_gpio_4bit2, + ARRAY_SIZE(s5p6450_gpio_4bit2)); + + s5p64x0_gpio_add_rbank_4bit2(s5p6450_gpio_rbank_4bit2, + ARRAY_SIZE(s5p6450_gpio_rbank_4bit2)); + } else { + samsung_gpiolib_add_2bit_chips(s5p6440_gpio_2bit, + ARRAY_SIZE(s5p6440_gpio_2bit)); + + samsung_gpiolib_add_4bit_chips(s5p6440_gpio_4bit, + ARRAY_SIZE(s5p6440_gpio_4bit)); + + samsung_gpiolib_add_4bit2_chips(s5p6440_gpio_4bit2, + ARRAY_SIZE(s5p6440_gpio_4bit2)); + + s5p64x0_gpio_add_rbank_4bit2(s5p6440_gpio_rbank_4bit2, + ARRAY_SIZE(s5p6440_gpio_rbank_4bit2)); + } + + return 0; +} +core_initcall(s5p64x0_gpiolib_init); -- cgit v1.2.3-18-g5258 From 1b39d5f2cc5c28085bbf48db80bf704ab4dedda9 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Tue, 30 Aug 2011 20:39:08 +0900 Subject: gpio/samsung: gpio-samsung.c to support Samsung GPIOs This patch adds support for Samsung GPIOs with one gpio driver and removes old GPIO drivers which are drivers/gpio-s3c24xx.c, gpio-s3c64xx.c, gpio-s5p64x0.c, gpio-s5pc100.c, gpio-s5pv210.c, gpio-exynos4.c, gpio-plat-samsung.c, plat-samsung/gpio-config.c and gpio.c to support each Samsung SoCs before. Because the gpio-samsung.c can replace old Samsung GPIO drivers. Basically, the gpio-samsung.c has been made by their merging and removing duplicated definitions. Note: gpio-samsung.c includes some SoC dependent codes and it will be replaced next time. Cc: Ben Dooks Acked-by: Grant Likely [kgene.kim@samsung.com: squash the removing and adding patches] [kgene.kim@samsung.com: fixes bug during to register of gpio_chips] Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/Makefile | 2 - arch/arm/plat-samsung/gpio-config.c | 431 ------ arch/arm/plat-samsung/gpio.c | 167 --- drivers/gpio/Kconfig | 28 - drivers/gpio/Makefile | 10 +- drivers/gpio/gpio-exynos4.c | 385 ----- drivers/gpio/gpio-plat-samsung.c | 205 --- drivers/gpio/gpio-s3c24xx.c | 283 ---- drivers/gpio/gpio-s3c64xx.c | 289 ---- drivers/gpio/gpio-s5p64x0.c | 510 ------- drivers/gpio/gpio-s5pc100.c | 354 ----- drivers/gpio/gpio-s5pv210.c | 287 ---- drivers/gpio/gpio-samsung.c | 2686 +++++++++++++++++++++++++++++++++++ 13 files changed, 2687 insertions(+), 2950 deletions(-) delete mode 100644 arch/arm/plat-samsung/gpio-config.c delete mode 100644 arch/arm/plat-samsung/gpio.c delete mode 100644 drivers/gpio/gpio-exynos4.c delete mode 100644 drivers/gpio/gpio-plat-samsung.c delete mode 100644 drivers/gpio/gpio-s3c24xx.c delete mode 100644 drivers/gpio/gpio-s3c64xx.c delete mode 100644 drivers/gpio/gpio-s5p64x0.c delete mode 100644 drivers/gpio/gpio-s5pc100.c delete mode 100644 drivers/gpio/gpio-s5pv210.c create mode 100644 drivers/gpio/gpio-samsung.c diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 853764ba8cc..6d772d7c012 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -15,8 +15,6 @@ obj-y += init.o obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o obj-y += clock.o obj-y += pwm-clock.o -obj-y += gpio.o -obj-y += gpio-config.o obj-y += dev-asocdma.o obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c deleted file mode 100644 index 1c0b0401594..00000000000 --- a/arch/arm/plat-samsung/gpio-config.c +++ /dev/null @@ -1,431 +0,0 @@ -/* linux/arch/arm/plat-s3c/gpio-config.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008-2010 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * S3C series GPIO configuration core - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include - -#include -#include -#include - -int s3c_gpio_cfgpin(unsigned int pin, unsigned int config) -{ - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); - unsigned long flags; - int offset; - int ret; - - if (!chip) - return -EINVAL; - - offset = pin - chip->chip.base; - - s3c_gpio_lock(chip, flags); - ret = s3c_gpio_do_setcfg(chip, offset, config); - s3c_gpio_unlock(chip, flags); - - return ret; -} -EXPORT_SYMBOL(s3c_gpio_cfgpin); - -int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr, - unsigned int cfg) -{ - int ret; - - for (; nr > 0; nr--, start++) { - ret = s3c_gpio_cfgpin(start, cfg); - if (ret != 0) - return ret; - } - - return 0; -} -EXPORT_SYMBOL_GPL(s3c_gpio_cfgpin_range); - -int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr, - unsigned int cfg, s3c_gpio_pull_t pull) -{ - int ret; - - for (; nr > 0; nr--, start++) { - s3c_gpio_setpull(start, pull); - ret = s3c_gpio_cfgpin(start, cfg); - if (ret != 0) - return ret; - } - - return 0; -} -EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range); - -unsigned s3c_gpio_getcfg(unsigned int pin) -{ - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); - unsigned long flags; - unsigned ret = 0; - int offset; - - if (chip) { - offset = pin - chip->chip.base; - - s3c_gpio_lock(chip, flags); - ret = s3c_gpio_do_getcfg(chip, offset); - s3c_gpio_unlock(chip, flags); - } - - return ret; -} -EXPORT_SYMBOL(s3c_gpio_getcfg); - - -int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull) -{ - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); - unsigned long flags; - int offset, ret; - - if (!chip) - return -EINVAL; - - offset = pin - chip->chip.base; - - s3c_gpio_lock(chip, flags); - ret = s3c_gpio_do_setpull(chip, offset, pull); - s3c_gpio_unlock(chip, flags); - - return ret; -} -EXPORT_SYMBOL(s3c_gpio_setpull); - -s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin) -{ - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); - unsigned long flags; - int offset; - u32 pup = 0; - - if (chip) { - offset = pin - chip->chip.base; - - s3c_gpio_lock(chip, flags); - pup = s3c_gpio_do_getpull(chip, offset); - s3c_gpio_unlock(chip, flags); - } - - return (__force s3c_gpio_pull_t)pup; -} -EXPORT_SYMBOL(s3c_gpio_getpull); - -#ifdef CONFIG_S3C_GPIO_CFG_S3C24XX -int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip, - unsigned int off, unsigned int cfg) -{ - void __iomem *reg = chip->base; - unsigned int shift = off; - u32 con; - - if (s3c_gpio_is_cfg_special(cfg)) { - cfg &= 0xf; - - /* Map output to 0, and SFN2 to 1 */ - cfg -= 1; - if (cfg > 1) - return -EINVAL; - - cfg <<= shift; - } - - con = __raw_readl(reg); - con &= ~(0x1 << shift); - con |= cfg; - __raw_writel(con, reg); - - return 0; -} - -unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip, - unsigned int off) -{ - u32 con; - - con = __raw_readl(chip->base); - con >>= off; - con &= 1; - con++; - - return S3C_GPIO_SFN(con); -} - -int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, - unsigned int off, unsigned int cfg) -{ - void __iomem *reg = chip->base; - unsigned int shift = off * 2; - u32 con; - - if (s3c_gpio_is_cfg_special(cfg)) { - cfg &= 0xf; - if (cfg > 3) - return -EINVAL; - - cfg <<= shift; - } - - con = __raw_readl(reg); - con &= ~(0x3 << shift); - con |= cfg; - __raw_writel(con, reg); - - return 0; -} - -unsigned int s3c_gpio_getcfg_s3c24xx(struct s3c_gpio_chip *chip, - unsigned int off) -{ - u32 con; - - con = __raw_readl(chip->base); - con >>= off * 2; - con &= 3; - - /* this conversion works for IN and OUT as well as special mode */ - return S3C_GPIO_SPECIAL(con); -} -#endif - -#ifdef CONFIG_S3C_GPIO_CFG_S3C64XX -int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, - unsigned int off, unsigned int cfg) -{ - void __iomem *reg = chip->base; - unsigned int shift = (off & 7) * 4; - u32 con; - - if (off < 8 && chip->chip.ngpio > 8) - reg -= 4; - - if (s3c_gpio_is_cfg_special(cfg)) { - cfg &= 0xf; - cfg <<= shift; - } - - con = __raw_readl(reg); - con &= ~(0xf << shift); - con |= cfg; - __raw_writel(con, reg); - - return 0; -} - -unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, - unsigned int off) -{ - void __iomem *reg = chip->base; - unsigned int shift = (off & 7) * 4; - u32 con; - - if (off < 8 && chip->chip.ngpio > 8) - reg -= 4; - - con = __raw_readl(reg); - con >>= shift; - con &= 0xf; - - /* this conversion works for IN and OUT as well as special mode */ - return S3C_GPIO_SPECIAL(con); -} - -#endif /* CONFIG_S3C_GPIO_CFG_S3C64XX */ - -#ifdef CONFIG_S3C_GPIO_PULL_UPDOWN -int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull) -{ - void __iomem *reg = chip->base + 0x08; - int shift = off * 2; - u32 pup; - - pup = __raw_readl(reg); - pup &= ~(3 << shift); - pup |= pull << shift; - __raw_writel(pup, reg); - - return 0; -} - -s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip, - unsigned int off) -{ - void __iomem *reg = chip->base + 0x08; - int shift = off * 2; - u32 pup = __raw_readl(reg); - - pup >>= shift; - pup &= 0x3; - return (__force s3c_gpio_pull_t)pup; -} - -#ifdef CONFIG_S3C_GPIO_PULL_S3C2443 -int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull) -{ - switch (pull) { - case S3C_GPIO_PULL_NONE: - pull = 0x01; - break; - case S3C_GPIO_PULL_UP: - pull = 0x00; - break; - case S3C_GPIO_PULL_DOWN: - pull = 0x02; - break; - } - return s3c_gpio_setpull_updown(chip, off, pull); -} - -s3c_gpio_pull_t s3c_gpio_getpull_s3c2443(struct s3c_gpio_chip *chip, - unsigned int off) -{ - s3c_gpio_pull_t pull; - - pull = s3c_gpio_getpull_updown(chip, off); - - switch (pull) { - case 0x00: - pull = S3C_GPIO_PULL_UP; - break; - case 0x01: - case 0x03: - pull = S3C_GPIO_PULL_NONE; - break; - case 0x02: - pull = S3C_GPIO_PULL_DOWN; - break; - } - - return pull; -} -#endif -#endif - -#if defined(CONFIG_S3C_GPIO_PULL_UP) || defined(CONFIG_S3C_GPIO_PULL_DOWN) -static int s3c_gpio_setpull_1(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull, - s3c_gpio_pull_t updown) -{ - void __iomem *reg = chip->base + 0x08; - u32 pup = __raw_readl(reg); - - if (pull == updown) - pup &= ~(1 << off); - else if (pull == S3C_GPIO_PULL_NONE) - pup |= (1 << off); - else - return -EINVAL; - - __raw_writel(pup, reg); - return 0; -} - -static s3c_gpio_pull_t s3c_gpio_getpull_1(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t updown) -{ - void __iomem *reg = chip->base + 0x08; - u32 pup = __raw_readl(reg); - - pup &= (1 << off); - return pup ? S3C_GPIO_PULL_NONE : updown; -} -#endif /* CONFIG_S3C_GPIO_PULL_UP || CONFIG_S3C_GPIO_PULL_DOWN */ - -#ifdef CONFIG_S3C_GPIO_PULL_UP -s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip, - unsigned int off) -{ - return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP); -} - -int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull) -{ - return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP); -} -#endif /* CONFIG_S3C_GPIO_PULL_UP */ - -#ifdef CONFIG_S3C_GPIO_PULL_DOWN -s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip, - unsigned int off) -{ - return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN); -} - -int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull) -{ - return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN); -} -#endif /* CONFIG_S3C_GPIO_PULL_DOWN */ - -#ifdef CONFIG_S5P_GPIO_DRVSTR -s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin) -{ - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); - unsigned int off; - void __iomem *reg; - int shift; - u32 drvstr; - - if (!chip) - return -EINVAL; - - off = pin - chip->chip.base; - shift = off * 2; - reg = chip->base + 0x0C; - - drvstr = __raw_readl(reg); - drvstr = drvstr >> shift; - drvstr &= 0x3; - - return (__force s5p_gpio_drvstr_t)drvstr; -} -EXPORT_SYMBOL(s5p_gpio_get_drvstr); - -int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr) -{ - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); - unsigned int off; - void __iomem *reg; - int shift; - u32 tmp; - - if (!chip) - return -EINVAL; - - off = pin - chip->chip.base; - shift = off * 2; - reg = chip->base + 0x0C; - - tmp = __raw_readl(reg); - tmp &= ~(0x3 << shift); - tmp |= drvstr << shift; - - __raw_writel(tmp, reg); - - return 0; -} -EXPORT_SYMBOL(s5p_gpio_set_drvstr); -#endif /* CONFIG_S5P_GPIO_DRVSTR */ diff --git a/arch/arm/plat-samsung/gpio.c b/arch/arm/plat-samsung/gpio.c deleted file mode 100644 index 7743c4b8b2f..00000000000 --- a/arch/arm/plat-samsung/gpio.c +++ /dev/null @@ -1,167 +0,0 @@ -/* linux/arch/arm/plat-s3c/gpio.c - * - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * S3C series GPIO core - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include - -#include - -#ifdef CONFIG_S3C_GPIO_TRACK -struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END]; - -static __init void s3c_gpiolib_track(struct s3c_gpio_chip *chip) -{ - unsigned int gpn; - int i; - - gpn = chip->chip.base; - for (i = 0; i < chip->chip.ngpio; i++, gpn++) { - BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios)); - s3c_gpios[gpn] = chip; - } -} -#endif /* CONFIG_S3C_GPIO_TRACK */ - -/* Default routines for controlling GPIO, based on the original S3C24XX - * GPIO functions which deal with the case where each gpio bank of the - * chip is as following: - * - * base + 0x00: Control register, 2 bits per gpio - * gpio n: 2 bits starting at (2*n) - * 00 = input, 01 = output, others mean special-function - * base + 0x04: Data register, 1 bit per gpio - * bit n: data bit n -*/ - -static int s3c_gpiolib_input(struct gpio_chip *chip, unsigned offset) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long flags; - unsigned long con; - - s3c_gpio_lock(ourchip, flags); - - con = __raw_readl(base + 0x00); - con &= ~(3 << (offset * 2)); - - __raw_writel(con, base + 0x00); - - s3c_gpio_unlock(ourchip, flags); - return 0; -} - -static int s3c_gpiolib_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long flags; - unsigned long dat; - unsigned long con; - - s3c_gpio_lock(ourchip, flags); - - dat = __raw_readl(base + 0x04); - dat &= ~(1 << offset); - if (value) - dat |= 1 << offset; - __raw_writel(dat, base + 0x04); - - con = __raw_readl(base + 0x00); - con &= ~(3 << (offset * 2)); - con |= 1 << (offset * 2); - - __raw_writel(con, base + 0x00); - __raw_writel(dat, base + 0x04); - - s3c_gpio_unlock(ourchip, flags); - return 0; -} - -static void s3c_gpiolib_set(struct gpio_chip *chip, - unsigned offset, int value) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long flags; - unsigned long dat; - - s3c_gpio_lock(ourchip, flags); - - dat = __raw_readl(base + 0x04); - dat &= ~(1 << offset); - if (value) - dat |= 1 << offset; - __raw_writel(dat, base + 0x04); - - s3c_gpio_unlock(ourchip, flags); -} - -static int s3c_gpiolib_get(struct gpio_chip *chip, unsigned offset) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - unsigned long val; - - val = __raw_readl(ourchip->base + 0x04); - val >>= offset; - val &= 1; - - return val; -} - -__init void s3c_gpiolib_add(struct s3c_gpio_chip *chip) -{ - struct gpio_chip *gc = &chip->chip; - int ret; - - BUG_ON(!chip->base); - BUG_ON(!gc->label); - BUG_ON(!gc->ngpio); - - spin_lock_init(&chip->lock); - - if (!gc->direction_input) - gc->direction_input = s3c_gpiolib_input; - if (!gc->direction_output) - gc->direction_output = s3c_gpiolib_output; - if (!gc->set) - gc->set = s3c_gpiolib_set; - if (!gc->get) - gc->get = s3c_gpiolib_get; - -#ifdef CONFIG_PM - if (chip->pm != NULL) { - if (!chip->pm->save || !chip->pm->resume) - printk(KERN_ERR "gpio: %s has missing PM functions\n", - gc->label); - } else - printk(KERN_ERR "gpio: %s has no PM function\n", gc->label); -#endif - - /* gpiochip_add() prints own failure message on error. */ - ret = gpiochip_add(gc); - if (ret >= 0) - s3c_gpiolib_track(chip); -} - -int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset) -{ - struct s3c_gpio_chip *s3c_chip = container_of(chip, - struct s3c_gpio_chip, chip); - - return s3c_chip->irq_base + offset; -} diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 5eb29bc18a5..ca44d2cceb0 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -95,10 +95,6 @@ config GPIO_EP93XX depends on ARCH_EP93XX select GPIO_GENERIC -config GPIO_EXYNOS4 - def_bool y - depends on CPU_EXYNOS4210 - config GPIO_MPC5200 def_bool y depends on PPC_MPC52xx @@ -131,30 +127,6 @@ config GPIO_MXS select GPIO_GENERIC select GENERIC_IRQ_CHIP -config GPIO_PLAT_SAMSUNG - def_bool y - depends on SAMSUNG_GPIOLIB_4BIT - -config GPIO_S3C24XX - def_bool y - depends on PLAT_S3C24XX - -config GPIO_S3C64XX - def_bool y - depends on ARCH_S3C64XX - -config GPIO_S5P64X0 - def_bool y - depends on ARCH_S5P64X0 - -config GPIO_S5PC100 - def_bool y - depends on CPU_S5PC100 - -config GPIO_S5PV210 - def_bool y - depends on CPU_S5PV210 - config GPIO_PL061 bool "PrimeCell PL061 GPIO support" depends on ARM_AMBA diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 10f3bbf0ece..62db458c850 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -15,7 +15,6 @@ obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o -obj-$(CONFIG_GPIO_EXYNOS4) += gpio-exynos4.o obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o obj-$(CONFIG_GPIO_LANGWELL) += gpio-langwell.o @@ -38,14 +37,7 @@ obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o obj-$(CONFIG_GPIO_PCH) += gpio-pch.o obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o - -obj-$(CONFIG_GPIO_PLAT_SAMSUNG) += gpio-plat-samsung.o -obj-$(CONFIG_GPIO_S3C24XX) += gpio-s3c24xx.o -obj-$(CONFIG_GPIO_S3C64XX) += gpio-s3c64xx.o -obj-$(CONFIG_GPIO_S5P64X0) += gpio-s5p64x0.o -obj-$(CONFIG_GPIO_S5PC100) += gpio-s5pc100.o -obj-$(CONFIG_GPIO_S5PV210) += gpio-s5pv210.o - +obj-$(CONFIG_PLAT_SAMSUNG) += gpio-samsung.o obj-$(CONFIG_GPIO_SCH) += gpio-sch.o obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o obj-$(CONFIG_GPIO_SX150X) += gpio-sx150x.o diff --git a/drivers/gpio/gpio-exynos4.c b/drivers/gpio/gpio-exynos4.c deleted file mode 100644 index d24b337cf1a..00000000000 --- a/drivers/gpio/gpio-exynos4.c +++ /dev/null @@ -1,385 +0,0 @@ -/* - * EXYNOS4 - GPIOlib support - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include - -#include - -#include -#include -#include - -int s3c_gpio_setpull_exynos4(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull) -{ - if (pull == S3C_GPIO_PULL_UP) - pull = 3; - - return s3c_gpio_setpull_updown(chip, off, pull); -} - -s3c_gpio_pull_t s3c_gpio_getpull_exynos4(struct s3c_gpio_chip *chip, - unsigned int off) -{ - s3c_gpio_pull_t pull; - - pull = s3c_gpio_getpull_updown(chip, off); - if (pull == 3) - pull = S3C_GPIO_PULL_UP; - - return pull; -} - -static struct s3c_gpio_cfg gpio_cfg = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_exynos4, - .get_pull = s3c_gpio_getpull_exynos4, -}; - -static struct s3c_gpio_cfg gpio_cfg_noint = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_exynos4, - .get_pull = s3c_gpio_getpull_exynos4, -}; - -/* - * Following are the gpio banks in v310. - * - * The 'config' member when left to NULL, is initialized to the default - * structure gpio_cfg in the init function below. - * - * The 'base' member is also initialized in the init function below. - * Note: The initialization of 'base' member of s3c_gpio_chip structure - * uses the above macro and depends on the banks being listed in order here. - */ -static struct s3c_gpio_chip exynos4_gpio_part1_4bit[] = { - { - .chip = { - .base = EXYNOS4_GPA0(0), - .ngpio = EXYNOS4_GPIO_A0_NR, - .label = "GPA0", - }, - }, { - .chip = { - .base = EXYNOS4_GPA1(0), - .ngpio = EXYNOS4_GPIO_A1_NR, - .label = "GPA1", - }, - }, { - .chip = { - .base = EXYNOS4_GPB(0), - .ngpio = EXYNOS4_GPIO_B_NR, - .label = "GPB", - }, - }, { - .chip = { - .base = EXYNOS4_GPC0(0), - .ngpio = EXYNOS4_GPIO_C0_NR, - .label = "GPC0", - }, - }, { - .chip = { - .base = EXYNOS4_GPC1(0), - .ngpio = EXYNOS4_GPIO_C1_NR, - .label = "GPC1", - }, - }, { - .chip = { - .base = EXYNOS4_GPD0(0), - .ngpio = EXYNOS4_GPIO_D0_NR, - .label = "GPD0", - }, - }, { - .chip = { - .base = EXYNOS4_GPD1(0), - .ngpio = EXYNOS4_GPIO_D1_NR, - .label = "GPD1", - }, - }, { - .chip = { - .base = EXYNOS4_GPE0(0), - .ngpio = EXYNOS4_GPIO_E0_NR, - .label = "GPE0", - }, - }, { - .chip = { - .base = EXYNOS4_GPE1(0), - .ngpio = EXYNOS4_GPIO_E1_NR, - .label = "GPE1", - }, - }, { - .chip = { - .base = EXYNOS4_GPE2(0), - .ngpio = EXYNOS4_GPIO_E2_NR, - .label = "GPE2", - }, - }, { - .chip = { - .base = EXYNOS4_GPE3(0), - .ngpio = EXYNOS4_GPIO_E3_NR, - .label = "GPE3", - }, - }, { - .chip = { - .base = EXYNOS4_GPE4(0), - .ngpio = EXYNOS4_GPIO_E4_NR, - .label = "GPE4", - }, - }, { - .chip = { - .base = EXYNOS4_GPF0(0), - .ngpio = EXYNOS4_GPIO_F0_NR, - .label = "GPF0", - }, - }, { - .chip = { - .base = EXYNOS4_GPF1(0), - .ngpio = EXYNOS4_GPIO_F1_NR, - .label = "GPF1", - }, - }, { - .chip = { - .base = EXYNOS4_GPF2(0), - .ngpio = EXYNOS4_GPIO_F2_NR, - .label = "GPF2", - }, - }, { - .chip = { - .base = EXYNOS4_GPF3(0), - .ngpio = EXYNOS4_GPIO_F3_NR, - .label = "GPF3", - }, - }, -}; - -static struct s3c_gpio_chip exynos4_gpio_part2_4bit[] = { - { - .chip = { - .base = EXYNOS4_GPJ0(0), - .ngpio = EXYNOS4_GPIO_J0_NR, - .label = "GPJ0", - }, - }, { - .chip = { - .base = EXYNOS4_GPJ1(0), - .ngpio = EXYNOS4_GPIO_J1_NR, - .label = "GPJ1", - }, - }, { - .chip = { - .base = EXYNOS4_GPK0(0), - .ngpio = EXYNOS4_GPIO_K0_NR, - .label = "GPK0", - }, - }, { - .chip = { - .base = EXYNOS4_GPK1(0), - .ngpio = EXYNOS4_GPIO_K1_NR, - .label = "GPK1", - }, - }, { - .chip = { - .base = EXYNOS4_GPK2(0), - .ngpio = EXYNOS4_GPIO_K2_NR, - .label = "GPK2", - }, - }, { - .chip = { - .base = EXYNOS4_GPK3(0), - .ngpio = EXYNOS4_GPIO_K3_NR, - .label = "GPK3", - }, - }, { - .chip = { - .base = EXYNOS4_GPL0(0), - .ngpio = EXYNOS4_GPIO_L0_NR, - .label = "GPL0", - }, - }, { - .chip = { - .base = EXYNOS4_GPL1(0), - .ngpio = EXYNOS4_GPIO_L1_NR, - .label = "GPL1", - }, - }, { - .chip = { - .base = EXYNOS4_GPL2(0), - .ngpio = EXYNOS4_GPIO_L2_NR, - .label = "GPL2", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY0(0), - .ngpio = EXYNOS4_GPIO_Y0_NR, - .label = "GPY0", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY1(0), - .ngpio = EXYNOS4_GPIO_Y1_NR, - .label = "GPY1", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY2(0), - .ngpio = EXYNOS4_GPIO_Y2_NR, - .label = "GPY2", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY3(0), - .ngpio = EXYNOS4_GPIO_Y3_NR, - .label = "GPY3", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY4(0), - .ngpio = EXYNOS4_GPIO_Y4_NR, - .label = "GPY4", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY5(0), - .ngpio = EXYNOS4_GPIO_Y5_NR, - .label = "GPY5", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY6(0), - .ngpio = EXYNOS4_GPIO_Y6_NR, - .label = "GPY6", - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC00), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(0), - .chip = { - .base = EXYNOS4_GPX0(0), - .ngpio = EXYNOS4_GPIO_X0_NR, - .label = "GPX0", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC20), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(8), - .chip = { - .base = EXYNOS4_GPX1(0), - .ngpio = EXYNOS4_GPIO_X1_NR, - .label = "GPX1", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC40), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(16), - .chip = { - .base = EXYNOS4_GPX2(0), - .ngpio = EXYNOS4_GPIO_X2_NR, - .label = "GPX2", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC60), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(24), - .chip = { - .base = EXYNOS4_GPX3(0), - .ngpio = EXYNOS4_GPIO_X3_NR, - .label = "GPX3", - .to_irq = samsung_gpiolib_to_irq, - }, - }, -}; - -static struct s3c_gpio_chip exynos4_gpio_part3_4bit[] = { - { - .chip = { - .base = EXYNOS4_GPZ(0), - .ngpio = EXYNOS4_GPIO_Z_NR, - .label = "GPZ", - }, - }, -}; - -static __init int exynos4_gpiolib_init(void) -{ - struct s3c_gpio_chip *chip; - int i; - int group = 0; - int nr_chips; - - /* GPIO part 1 */ - - chip = exynos4_gpio_part1_4bit; - nr_chips = ARRAY_SIZE(exynos4_gpio_part1_4bit); - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) { - chip->config = &gpio_cfg; - /* Assign the GPIO interrupt group */ - chip->group = group++; - } - if (chip->base == NULL) - chip->base = S5P_VA_GPIO1 + (i) * 0x20; - } - - samsung_gpiolib_add_4bit_chips(exynos4_gpio_part1_4bit, nr_chips); - - /* GPIO part 2 */ - - chip = exynos4_gpio_part2_4bit; - nr_chips = ARRAY_SIZE(exynos4_gpio_part2_4bit); - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) { - chip->config = &gpio_cfg; - /* Assign the GPIO interrupt group */ - chip->group = group++; - } - if (chip->base == NULL) - chip->base = S5P_VA_GPIO2 + (i) * 0x20; - } - - samsung_gpiolib_add_4bit_chips(exynos4_gpio_part2_4bit, nr_chips); - - /* GPIO part 3 */ - - chip = exynos4_gpio_part3_4bit; - nr_chips = ARRAY_SIZE(exynos4_gpio_part3_4bit); - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) { - chip->config = &gpio_cfg; - /* Assign the GPIO interrupt group */ - chip->group = group++; - } - if (chip->base == NULL) - chip->base = S5P_VA_GPIO3 + (i) * 0x20; - } - - samsung_gpiolib_add_4bit_chips(exynos4_gpio_part3_4bit, nr_chips); - s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS); - s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS); - - return 0; -} -core_initcall(exynos4_gpiolib_init); diff --git a/drivers/gpio/gpio-plat-samsung.c b/drivers/gpio/gpio-plat-samsung.c deleted file mode 100644 index ef67f1952a7..00000000000 --- a/drivers/gpio/gpio-plat-samsung.c +++ /dev/null @@ -1,205 +0,0 @@ -/* - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * SAMSUNG - GPIOlib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include - -#ifndef DEBUG_GPIO -#define gpio_dbg(x...) do { } while (0) -#else -#define gpio_dbg(x...) printk(KERN_DEBUG x) -#endif - -/* The samsung_gpiolib_4bit routines are to control the gpio banks where - * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the - * following example: - * - * base + 0x00: Control register, 4 bits per gpio - * gpio n: 4 bits starting at (4*n) - * 0000 = input, 0001 = output, others mean special-function - * base + 0x04: Data register, 1 bit per gpio - * bit n: data bit n - * - * Note, since the data register is one bit per gpio and is at base + 0x4 - * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of - * the output. -*/ - -static int samsung_gpiolib_4bit_input(struct gpio_chip *chip, - unsigned int offset) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long con; - - con = __raw_readl(base + GPIOCON_OFF); - con &= ~(0xf << con_4bit_shift(offset)); - __raw_writel(con, base + GPIOCON_OFF); - - gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con); - - return 0; -} - -static int samsung_gpiolib_4bit_output(struct gpio_chip *chip, - unsigned int offset, int value) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long con; - unsigned long dat; - - con = __raw_readl(base + GPIOCON_OFF); - con &= ~(0xf << con_4bit_shift(offset)); - con |= 0x1 << con_4bit_shift(offset); - - dat = __raw_readl(base + GPIODAT_OFF); - - if (value) - dat |= 1 << offset; - else - dat &= ~(1 << offset); - - __raw_writel(dat, base + GPIODAT_OFF); - __raw_writel(con, base + GPIOCON_OFF); - __raw_writel(dat, base + GPIODAT_OFF); - - gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); - - return 0; -} - -/* The next set of routines are for the case where the GPIO configuration - * registers are 4 bits per GPIO but there is more than one register (the - * bank has more than 8 GPIOs. - * - * This case is the similar to the 4 bit case, but the registers are as - * follows: - * - * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs) - * gpio n: 4 bits starting at (4*n) - * 0000 = input, 0001 = output, others mean special-function - * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs) - * gpio n: 4 bits starting at (4*n) - * 0000 = input, 0001 = output, others mean special-function - * base + 0x08: Data register, 1 bit per gpio - * bit n: data bit n - * - * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we - * store the 'base + 0x4' address so that these routines see the data - * register at ourchip->base + 0x04. - */ - -static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip, - unsigned int offset) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - void __iomem *regcon = base; - unsigned long con; - - if (offset > 7) - offset -= 8; - else - regcon -= 4; - - con = __raw_readl(regcon); - con &= ~(0xf << con_4bit_shift(offset)); - __raw_writel(con, regcon); - - gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con); - - return 0; -} - -static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip, - unsigned int offset, int value) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - void __iomem *regcon = base; - unsigned long con; - unsigned long dat; - unsigned con_offset = offset; - - if (con_offset > 7) - con_offset -= 8; - else - regcon -= 4; - - con = __raw_readl(regcon); - con &= ~(0xf << con_4bit_shift(con_offset)); - con |= 0x1 << con_4bit_shift(con_offset); - - dat = __raw_readl(base + GPIODAT_OFF); - - if (value) - dat |= 1 << offset; - else - dat &= ~(1 << offset); - - __raw_writel(dat, base + GPIODAT_OFF); - __raw_writel(con, regcon); - __raw_writel(dat, base + GPIODAT_OFF); - - gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); - - return 0; -} - -void __init samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip) -{ - chip->chip.direction_input = samsung_gpiolib_4bit_input; - chip->chip.direction_output = samsung_gpiolib_4bit_output; - chip->pm = __gpio_pm(&s3c_gpio_pm_4bit); -} - -void __init samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip) -{ - chip->chip.direction_input = samsung_gpiolib_4bit2_input; - chip->chip.direction_output = samsung_gpiolib_4bit2_output; - chip->pm = __gpio_pm(&s3c_gpio_pm_4bit); -} - -void __init samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip, - int nr_chips) -{ - for (; nr_chips > 0; nr_chips--, chip++) { - samsung_gpiolib_add_4bit(chip); - s3c_gpiolib_add(chip); - } -} - -void __init samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip, - int nr_chips) -{ - for (; nr_chips > 0; nr_chips--, chip++) { - samsung_gpiolib_add_4bit2(chip); - s3c_gpiolib_add(chip); - } -} - -void __init samsung_gpiolib_add_2bit_chips(struct s3c_gpio_chip *chip, - int nr_chips) -{ - for (; nr_chips > 0; nr_chips--, chip++) - s3c_gpiolib_add(chip); -} diff --git a/drivers/gpio/gpio-s3c24xx.c b/drivers/gpio/gpio-s3c24xx.c deleted file mode 100644 index ff6103130fe..00000000000 --- a/drivers/gpio/gpio-s3c24xx.c +++ /dev/null @@ -1,283 +0,0 @@ -/* - * Copyright (c) 2008-2010 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * S3C24XX GPIOlib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include - -static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset) -{ - return -EINVAL; -} - -static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long flags; - unsigned long dat; - unsigned long con; - - local_irq_save(flags); - - con = __raw_readl(base + 0x00); - dat = __raw_readl(base + 0x04); - - dat &= ~(1 << offset); - if (value) - dat |= 1 << offset; - - __raw_writel(dat, base + 0x04); - - con &= ~(1 << offset); - - __raw_writel(con, base + 0x00); - __raw_writel(dat, base + 0x04); - - local_irq_restore(flags); - return 0; -} - -static int s3c24xx_gpiolib_bankf_toirq(struct gpio_chip *chip, unsigned offset) -{ - if (offset < 4) - return IRQ_EINT0 + offset; - - if (offset < 8) - return IRQ_EINT4 + offset - 4; - - return -EINVAL; -} - -static struct s3c_gpio_cfg s3c24xx_gpiocfg_banka = { - .set_config = s3c_gpio_setcfg_s3c24xx_a, - .get_config = s3c_gpio_getcfg_s3c24xx_a, -}; - -struct s3c_gpio_cfg s3c24xx_gpiocfg_default = { - .set_config = s3c_gpio_setcfg_s3c24xx, - .get_config = s3c_gpio_getcfg_s3c24xx, -}; - -struct s3c_gpio_chip s3c24xx_gpios[] = { - [0] = { - .base = S3C2410_GPACON, - .pm = __gpio_pm(&s3c_gpio_pm_1bit), - .config = &s3c24xx_gpiocfg_banka, - .chip = { - .base = S3C2410_GPA(0), - .owner = THIS_MODULE, - .label = "GPIOA", - .ngpio = 24, - .direction_input = s3c24xx_gpiolib_banka_input, - .direction_output = s3c24xx_gpiolib_banka_output, - }, - }, - [1] = { - .base = S3C2410_GPBCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPB(0), - .owner = THIS_MODULE, - .label = "GPIOB", - .ngpio = 16, - }, - }, - [2] = { - .base = S3C2410_GPCCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPC(0), - .owner = THIS_MODULE, - .label = "GPIOC", - .ngpio = 16, - }, - }, - [3] = { - .base = S3C2410_GPDCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPD(0), - .owner = THIS_MODULE, - .label = "GPIOD", - .ngpio = 16, - }, - }, - [4] = { - .base = S3C2410_GPECON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPE(0), - .label = "GPIOE", - .owner = THIS_MODULE, - .ngpio = 16, - }, - }, - [5] = { - .base = S3C2410_GPFCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPF(0), - .owner = THIS_MODULE, - .label = "GPIOF", - .ngpio = 8, - .to_irq = s3c24xx_gpiolib_bankf_toirq, - }, - }, - [6] = { - .base = S3C2410_GPGCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .irq_base = IRQ_EINT8, - .chip = { - .base = S3C2410_GPG(0), - .owner = THIS_MODULE, - .label = "GPIOG", - .ngpio = 16, - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = S3C2410_GPHCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPH(0), - .owner = THIS_MODULE, - .label = "GPIOH", - .ngpio = 11, - }, - }, - /* GPIOS for the S3C2443 and later devices. */ - { - .base = S3C2440_GPJCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPJ(0), - .owner = THIS_MODULE, - .label = "GPIOJ", - .ngpio = 16, - }, - }, { - .base = S3C2443_GPKCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPK(0), - .owner = THIS_MODULE, - .label = "GPIOK", - .ngpio = 16, - }, - }, { - .base = S3C2443_GPLCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPL(0), - .owner = THIS_MODULE, - .label = "GPIOL", - .ngpio = 15, - }, - }, { - .base = S3C2443_GPMCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPM(0), - .owner = THIS_MODULE, - .label = "GPIOM", - .ngpio = 2, - }, - }, -}; - -static __init int s3c24xx_gpiolib_init(void) -{ - struct s3c_gpio_chip *chip = s3c24xx_gpios; - int gpn; - - for (gpn = 0; gpn < ARRAY_SIZE(s3c24xx_gpios); gpn++, chip++) { - if (!chip->config) - chip->config = &s3c24xx_gpiocfg_default; - - s3c_gpiolib_add(chip); - } - - return 0; -} -core_initcall(s3c24xx_gpiolib_init); - -/* gpiolib wrappers until these are totally eliminated */ - -void s3c2410_gpio_pullup(unsigned int pin, unsigned int to) -{ - int ret; - - WARN_ON(to); /* should be none of these left */ - - if (!to) { - /* if pull is enabled, try first with up, and if that - * fails, try using down */ - - ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP); - if (ret) - s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN); - } else { - s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE); - } -} -EXPORT_SYMBOL(s3c2410_gpio_pullup); - -void s3c2410_gpio_setpin(unsigned int pin, unsigned int to) -{ - /* do this via gpiolib until all users removed */ - - gpio_request(pin, "temporary"); - gpio_set_value(pin, to); - gpio_free(pin); -} -EXPORT_SYMBOL(s3c2410_gpio_setpin); - -unsigned int s3c2410_gpio_getpin(unsigned int pin) -{ - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); - unsigned long offs = pin - chip->chip.base; - - return __raw_readl(chip->base + 0x04) & (1<< offs); -} -EXPORT_SYMBOL(s3c2410_gpio_getpin); - -unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change) -{ - unsigned long flags; - unsigned long misccr; - - local_irq_save(flags); - misccr = __raw_readl(S3C24XX_MISCCR); - misccr &= ~clear; - misccr ^= change; - __raw_writel(misccr, S3C24XX_MISCCR); - local_irq_restore(flags); - - return misccr; -} -EXPORT_SYMBOL(s3c2410_modify_misccr); diff --git a/drivers/gpio/gpio-s3c64xx.c b/drivers/gpio/gpio-s3c64xx.c deleted file mode 100644 index b4f1c8204f0..00000000000 --- a/drivers/gpio/gpio-s3c64xx.c +++ /dev/null @@ -1,289 +0,0 @@ -/* - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * S3C64XX - GPIOlib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include - -#include - -#include -#include -#include -#include - -/* GPIO bank summary: - * - * Bank GPIOs Style SlpCon ExtInt Group - * A 8 4Bit Yes 1 - * B 7 4Bit Yes 1 - * C 8 4Bit Yes 2 - * D 5 4Bit Yes 3 - * E 5 4Bit Yes None - * F 16 2Bit Yes 4 [1] - * G 7 4Bit Yes 5 - * H 10 4Bit[2] Yes 6 - * I 16 2Bit Yes None - * J 12 2Bit Yes None - * K 16 4Bit[2] No None - * L 15 4Bit[2] No None - * M 6 4Bit No IRQ_EINT - * N 16 2Bit No IRQ_EINT - * O 16 2Bit Yes 7 - * P 15 2Bit Yes 8 - * Q 9 2Bit Yes 9 - * - * [1] BANKF pins 14,15 do not form part of the external interrupt sources - * [2] BANK has two control registers, GPxCON0 and GPxCON1 - */ - -static struct s3c_gpio_cfg gpio_4bit_cfg_noint = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .get_config = s3c_gpio_getcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = { - .cfg_eint = 7, - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .get_config = s3c_gpio_getcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = { - .cfg_eint = 3, - .get_config = s3c_gpio_getcfg_s3c64xx_4bit, - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin) -{ - return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO; -} - -static struct s3c_gpio_chip gpio_4bit[] = { - { - .base = S3C64XX_GPA_BASE, - .config = &gpio_4bit_cfg_eint0111, - .chip = { - .base = S3C64XX_GPA(0), - .ngpio = S3C64XX_GPIO_A_NR, - .label = "GPA", - }, - }, { - .base = S3C64XX_GPB_BASE, - .config = &gpio_4bit_cfg_eint0111, - .chip = { - .base = S3C64XX_GPB(0), - .ngpio = S3C64XX_GPIO_B_NR, - .label = "GPB", - }, - }, { - .base = S3C64XX_GPC_BASE, - .config = &gpio_4bit_cfg_eint0111, - .chip = { - .base = S3C64XX_GPC(0), - .ngpio = S3C64XX_GPIO_C_NR, - .label = "GPC", - }, - }, { - .base = S3C64XX_GPD_BASE, - .config = &gpio_4bit_cfg_eint0111, - .chip = { - .base = S3C64XX_GPD(0), - .ngpio = S3C64XX_GPIO_D_NR, - .label = "GPD", - }, - }, { - .base = S3C64XX_GPE_BASE, - .config = &gpio_4bit_cfg_noint, - .chip = { - .base = S3C64XX_GPE(0), - .ngpio = S3C64XX_GPIO_E_NR, - .label = "GPE", - }, - }, { - .base = S3C64XX_GPG_BASE, - .config = &gpio_4bit_cfg_eint0111, - .chip = { - .base = S3C64XX_GPG(0), - .ngpio = S3C64XX_GPIO_G_NR, - .label = "GPG", - }, - }, { - .base = S3C64XX_GPM_BASE, - .config = &gpio_4bit_cfg_eint0011, - .chip = { - .base = S3C64XX_GPM(0), - .ngpio = S3C64XX_GPIO_M_NR, - .label = "GPM", - .to_irq = s3c64xx_gpio2int_gpm, - }, - }, -}; - -static int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin) -{ - return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO; -} - -static struct s3c_gpio_chip gpio_4bit2[] = { - { - .base = S3C64XX_GPH_BASE + 0x4, - .config = &gpio_4bit_cfg_eint0111, - .chip = { - .base = S3C64XX_GPH(0), - .ngpio = S3C64XX_GPIO_H_NR, - .label = "GPH", - }, - }, { - .base = S3C64XX_GPK_BASE + 0x4, - .config = &gpio_4bit_cfg_noint, - .chip = { - .base = S3C64XX_GPK(0), - .ngpio = S3C64XX_GPIO_K_NR, - .label = "GPK", - }, - }, { - .base = S3C64XX_GPL_BASE + 0x4, - .config = &gpio_4bit_cfg_eint0011, - .chip = { - .base = S3C64XX_GPL(0), - .ngpio = S3C64XX_GPIO_L_NR, - .label = "GPL", - .to_irq = s3c64xx_gpio2int_gpl, - }, - }, -}; - -static struct s3c_gpio_cfg gpio_2bit_cfg_noint = { - .set_config = s3c_gpio_setcfg_s3c24xx, - .get_config = s3c_gpio_getcfg_s3c24xx, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = { - .cfg_eint = 2, - .set_config = s3c_gpio_setcfg_s3c24xx, - .get_config = s3c_gpio_getcfg_s3c24xx, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = { - .cfg_eint = 3, - .set_config = s3c_gpio_setcfg_s3c24xx, - .get_config = s3c_gpio_getcfg_s3c24xx, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_chip gpio_2bit[] = { - { - .base = S3C64XX_GPF_BASE, - .config = &gpio_2bit_cfg_eint11, - .chip = { - .base = S3C64XX_GPF(0), - .ngpio = S3C64XX_GPIO_F_NR, - .label = "GPF", - }, - }, { - .base = S3C64XX_GPI_BASE, - .config = &gpio_2bit_cfg_noint, - .chip = { - .base = S3C64XX_GPI(0), - .ngpio = S3C64XX_GPIO_I_NR, - .label = "GPI", - }, - }, { - .base = S3C64XX_GPJ_BASE, - .config = &gpio_2bit_cfg_noint, - .chip = { - .base = S3C64XX_GPJ(0), - .ngpio = S3C64XX_GPIO_J_NR, - .label = "GPJ", - }, - }, { - .base = S3C64XX_GPN_BASE, - .irq_base = IRQ_EINT(0), - .config = &gpio_2bit_cfg_eint10, - .chip = { - .base = S3C64XX_GPN(0), - .ngpio = S3C64XX_GPIO_N_NR, - .label = "GPN", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = S3C64XX_GPO_BASE, - .config = &gpio_2bit_cfg_eint11, - .chip = { - .base = S3C64XX_GPO(0), - .ngpio = S3C64XX_GPIO_O_NR, - .label = "GPO", - }, - }, { - .base = S3C64XX_GPP_BASE, - .config = &gpio_2bit_cfg_eint11, - .chip = { - .base = S3C64XX_GPP(0), - .ngpio = S3C64XX_GPIO_P_NR, - .label = "GPP", - }, - }, { - .base = S3C64XX_GPQ_BASE, - .config = &gpio_2bit_cfg_eint11, - .chip = { - .base = S3C64XX_GPQ(0), - .ngpio = S3C64XX_GPIO_Q_NR, - .label = "GPQ", - }, - }, -}; - -static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip) -{ - chip->pm = __gpio_pm(&s3c_gpio_pm_2bit); -} - -static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips, - int nr_chips, - void (*fn)(struct s3c_gpio_chip *)) -{ - for (; nr_chips > 0; nr_chips--, chips++) { - if (fn) - (fn)(chips); - s3c_gpiolib_add(chips); - } -} - -static __init int s3c64xx_gpiolib_init(void) -{ - s3c64xx_gpiolib_add(gpio_4bit, ARRAY_SIZE(gpio_4bit), - samsung_gpiolib_add_4bit); - - s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2), - samsung_gpiolib_add_4bit2); - - s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit), - s3c64xx_gpiolib_add_2bit); - - return 0; -} - -core_initcall(s3c64xx_gpiolib_init); diff --git a/drivers/gpio/gpio-s5p64x0.c b/drivers/gpio/gpio-s5p64x0.c deleted file mode 100644 index 96e816f5cc9..00000000000 --- a/drivers/gpio/gpio-s5p64x0.c +++ /dev/null @@ -1,510 +0,0 @@ -/* - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - GPIOlib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -/* - * S5P6440 GPIO bank summary: - * - * Bank GPIOs Style SlpCon ExtInt Group - * A 6 4Bit Yes 1 - * B 7 4Bit Yes 1 - * C 8 4Bit Yes 2 - * F 2 2Bit Yes 4 [1] - * G 7 4Bit Yes 5 - * H 10 4Bit[2] Yes 6 - * I 16 2Bit Yes None - * J 12 2Bit Yes None - * N 16 2Bit No IRQ_EINT - * P 8 2Bit Yes 8 - * R 15 4Bit[2] Yes 8 - * - * S5P6450 GPIO bank summary: - * - * Bank GPIOs Style SlpCon ExtInt Group - * A 6 4Bit Yes 1 - * B 7 4Bit Yes 1 - * C 8 4Bit Yes 2 - * D 8 4Bit Yes None - * F 2 2Bit Yes None - * G 14 4Bit[2] Yes 5 - * H 10 4Bit[2] Yes 6 - * I 16 2Bit Yes None - * J 12 2Bit Yes None - * K 5 4Bit Yes None - * N 16 2Bit No IRQ_EINT - * P 11 2Bit Yes 8 - * Q 14 2Bit Yes None - * R 15 4Bit[2] Yes None - * S 8 2Bit Yes None - * - * [1] BANKF pins 14,15 do not form part of the external interrupt sources - * [2] BANK has two control registers, GPxCON0 and GPxCON1 - */ - -static int s5p64x0_gpiolib_rbank_4bit2_input(struct gpio_chip *chip, - unsigned int offset) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - void __iomem *regcon = base; - unsigned long con; - unsigned long flags; - - switch (offset) { - case 6: - offset += 1; - case 0: - case 1: - case 2: - case 3: - case 4: - case 5: - regcon -= 4; - break; - default: - offset -= 7; - break; - } - - s3c_gpio_lock(ourchip, flags); - - con = __raw_readl(regcon); - con &= ~(0xf << con_4bit_shift(offset)); - __raw_writel(con, regcon); - - s3c_gpio_unlock(ourchip, flags); - - return 0; -} - -static int s5p64x0_gpiolib_rbank_4bit2_output(struct gpio_chip *chip, - unsigned int offset, int value) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - void __iomem *regcon = base; - unsigned long con; - unsigned long dat; - unsigned long flags; - unsigned con_offset = offset; - - switch (con_offset) { - case 6: - con_offset += 1; - case 0: - case 1: - case 2: - case 3: - case 4: - case 5: - regcon -= 4; - break; - default: - con_offset -= 7; - break; - } - - s3c_gpio_lock(ourchip, flags); - - con = __raw_readl(regcon); - con &= ~(0xf << con_4bit_shift(con_offset)); - con |= 0x1 << con_4bit_shift(con_offset); - - dat = __raw_readl(base + GPIODAT_OFF); - if (value) - dat |= 1 << offset; - else - dat &= ~(1 << offset); - - __raw_writel(con, regcon); - __raw_writel(dat, base + GPIODAT_OFF); - - s3c_gpio_unlock(ourchip, flags); - - return 0; -} - -int s5p64x0_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip, - unsigned int off, unsigned int cfg) -{ - void __iomem *reg = chip->base; - unsigned int shift; - u32 con; - - switch (off) { - case 0: - case 1: - case 2: - case 3: - case 4: - case 5: - shift = (off & 7) * 4; - reg -= 4; - break; - case 6: - shift = ((off + 1) & 7) * 4; - reg -= 4; - default: - shift = ((off + 1) & 7) * 4; - break; - } - - if (s3c_gpio_is_cfg_special(cfg)) { - cfg &= 0xf; - cfg <<= shift; - } - - con = __raw_readl(reg); - con &= ~(0xf << shift); - con |= cfg; - __raw_writel(con, reg); - - return 0; -} - -static struct s3c_gpio_cfg s5p64x0_gpio_cfgs[] = { - { - .cfg_eint = 0, - }, { - .cfg_eint = 7, - }, { - .cfg_eint = 3, - .set_config = s5p64x0_gpio_setcfg_4bit_rbank, - }, { - .cfg_eint = 0, - .set_config = s3c_gpio_setcfg_s3c24xx, - .get_config = s3c_gpio_getcfg_s3c24xx, - }, { - .cfg_eint = 2, - .set_config = s3c_gpio_setcfg_s3c24xx, - .get_config = s3c_gpio_getcfg_s3c24xx, - }, { - .cfg_eint = 3, - .set_config = s3c_gpio_setcfg_s3c24xx, - .get_config = s3c_gpio_getcfg_s3c24xx, - }, -}; - -static struct s3c_gpio_chip s5p6440_gpio_4bit[] = { - { - .base = S5P64X0_GPA_BASE, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6440_GPA(0), - .ngpio = S5P6440_GPIO_A_NR, - .label = "GPA", - }, - }, { - .base = S5P64X0_GPB_BASE, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6440_GPB(0), - .ngpio = S5P6440_GPIO_B_NR, - .label = "GPB", - }, - }, { - .base = S5P64X0_GPC_BASE, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6440_GPC(0), - .ngpio = S5P6440_GPIO_C_NR, - .label = "GPC", - }, - }, { - .base = S5P64X0_GPG_BASE, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6440_GPG(0), - .ngpio = S5P6440_GPIO_G_NR, - .label = "GPG", - }, - }, -}; - -static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = { - { - .base = S5P64X0_GPH_BASE + 0x4, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6440_GPH(0), - .ngpio = S5P6440_GPIO_H_NR, - .label = "GPH", - }, - }, -}; - -static struct s3c_gpio_chip s5p6440_gpio_rbank_4bit2[] = { - { - .base = S5P64X0_GPR_BASE + 0x4, - .config = &s5p64x0_gpio_cfgs[2], - .chip = { - .base = S5P6440_GPR(0), - .ngpio = S5P6440_GPIO_R_NR, - .label = "GPR", - }, - }, -}; - -static struct s3c_gpio_chip s5p6440_gpio_2bit[] = { - { - .base = S5P64X0_GPF_BASE, - .config = &s5p64x0_gpio_cfgs[5], - .chip = { - .base = S5P6440_GPF(0), - .ngpio = S5P6440_GPIO_F_NR, - .label = "GPF", - }, - }, { - .base = S5P64X0_GPI_BASE, - .config = &s5p64x0_gpio_cfgs[3], - .chip = { - .base = S5P6440_GPI(0), - .ngpio = S5P6440_GPIO_I_NR, - .label = "GPI", - }, - }, { - .base = S5P64X0_GPJ_BASE, - .config = &s5p64x0_gpio_cfgs[3], - .chip = { - .base = S5P6440_GPJ(0), - .ngpio = S5P6440_GPIO_J_NR, - .label = "GPJ", - }, - }, { - .base = S5P64X0_GPN_BASE, - .config = &s5p64x0_gpio_cfgs[4], - .chip = { - .base = S5P6440_GPN(0), - .ngpio = S5P6440_GPIO_N_NR, - .label = "GPN", - }, - }, { - .base = S5P64X0_GPP_BASE, - .config = &s5p64x0_gpio_cfgs[5], - .chip = { - .base = S5P6440_GPP(0), - .ngpio = S5P6440_GPIO_P_NR, - .label = "GPP", - }, - }, -}; - -static struct s3c_gpio_chip s5p6450_gpio_4bit[] = { - { - .base = S5P64X0_GPA_BASE, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6450_GPA(0), - .ngpio = S5P6450_GPIO_A_NR, - .label = "GPA", - }, - }, { - .base = S5P64X0_GPB_BASE, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6450_GPB(0), - .ngpio = S5P6450_GPIO_B_NR, - .label = "GPB", - }, - }, { - .base = S5P64X0_GPC_BASE, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6450_GPC(0), - .ngpio = S5P6450_GPIO_C_NR, - .label = "GPC", - }, - }, { - .base = S5P6450_GPD_BASE, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6450_GPD(0), - .ngpio = S5P6450_GPIO_D_NR, - .label = "GPD", - }, - }, { - .base = S5P6450_GPK_BASE, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6450_GPK(0), - .ngpio = S5P6450_GPIO_K_NR, - .label = "GPK", - }, - }, -}; - -static struct s3c_gpio_chip s5p6450_gpio_4bit2[] = { - { - .base = S5P64X0_GPG_BASE + 0x4, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6450_GPG(0), - .ngpio = S5P6450_GPIO_G_NR, - .label = "GPG", - }, - }, { - .base = S5P64X0_GPH_BASE + 0x4, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6450_GPH(0), - .ngpio = S5P6450_GPIO_H_NR, - .label = "GPH", - }, - }, -}; - -static struct s3c_gpio_chip s5p6450_gpio_rbank_4bit2[] = { - { - .base = S5P64X0_GPR_BASE + 0x4, - .config = &s5p64x0_gpio_cfgs[2], - .chip = { - .base = S5P6450_GPR(0), - .ngpio = S5P6450_GPIO_R_NR, - .label = "GPR", - }, - }, -}; - -static struct s3c_gpio_chip s5p6450_gpio_2bit[] = { - { - .base = S5P64X0_GPF_BASE, - .config = &s5p64x0_gpio_cfgs[5], - .chip = { - .base = S5P6450_GPF(0), - .ngpio = S5P6450_GPIO_F_NR, - .label = "GPF", - }, - }, { - .base = S5P64X0_GPI_BASE, - .config = &s5p64x0_gpio_cfgs[3], - .chip = { - .base = S5P6450_GPI(0), - .ngpio = S5P6450_GPIO_I_NR, - .label = "GPI", - }, - }, { - .base = S5P64X0_GPJ_BASE, - .config = &s5p64x0_gpio_cfgs[3], - .chip = { - .base = S5P6450_GPJ(0), - .ngpio = S5P6450_GPIO_J_NR, - .label = "GPJ", - }, - }, { - .base = S5P64X0_GPN_BASE, - .config = &s5p64x0_gpio_cfgs[4], - .chip = { - .base = S5P6450_GPN(0), - .ngpio = S5P6450_GPIO_N_NR, - .label = "GPN", - }, - }, { - .base = S5P64X0_GPP_BASE, - .config = &s5p64x0_gpio_cfgs[5], - .chip = { - .base = S5P6450_GPP(0), - .ngpio = S5P6450_GPIO_P_NR, - .label = "GPP", - }, - }, { - .base = S5P6450_GPQ_BASE, - .config = &s5p64x0_gpio_cfgs[4], - .chip = { - .base = S5P6450_GPQ(0), - .ngpio = S5P6450_GPIO_Q_NR, - .label = "GPQ", - }, - }, { - .base = S5P6450_GPS_BASE, - .config = &s5p64x0_gpio_cfgs[5], - .chip = { - .base = S5P6450_GPS(0), - .ngpio = S5P6450_GPIO_S_NR, - .label = "GPS", - }, - }, -}; - -void __init s5p64x0_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips) -{ - for (; nr_chips > 0; nr_chips--, chipcfg++) { - if (!chipcfg->set_config) - chipcfg->set_config = s3c_gpio_setcfg_s3c64xx_4bit; - if (!chipcfg->get_config) - chipcfg->get_config = s3c_gpio_getcfg_s3c64xx_4bit; - if (!chipcfg->set_pull) - chipcfg->set_pull = s3c_gpio_setpull_updown; - if (!chipcfg->get_pull) - chipcfg->get_pull = s3c_gpio_getpull_updown; - } -} - -static void __init s5p64x0_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip, - int nr_chips) -{ - for (; nr_chips > 0; nr_chips--, chip++) { - chip->chip.direction_input = s5p64x0_gpiolib_rbank_4bit2_input; - chip->chip.direction_output = - s5p64x0_gpiolib_rbank_4bit2_output; - s3c_gpiolib_add(chip); - } -} - -static int __init s5p64x0_gpiolib_init(void) -{ - unsigned int chipid; - - chipid = __raw_readl(S5P64X0_SYS_ID); - - s5p64x0_gpiolib_set_cfg(s5p64x0_gpio_cfgs, - ARRAY_SIZE(s5p64x0_gpio_cfgs)); - - if ((chipid & 0xff000) == 0x50000) { - samsung_gpiolib_add_2bit_chips(s5p6450_gpio_2bit, - ARRAY_SIZE(s5p6450_gpio_2bit)); - - samsung_gpiolib_add_4bit_chips(s5p6450_gpio_4bit, - ARRAY_SIZE(s5p6450_gpio_4bit)); - - samsung_gpiolib_add_4bit2_chips(s5p6450_gpio_4bit2, - ARRAY_SIZE(s5p6450_gpio_4bit2)); - - s5p64x0_gpio_add_rbank_4bit2(s5p6450_gpio_rbank_4bit2, - ARRAY_SIZE(s5p6450_gpio_rbank_4bit2)); - } else { - samsung_gpiolib_add_2bit_chips(s5p6440_gpio_2bit, - ARRAY_SIZE(s5p6440_gpio_2bit)); - - samsung_gpiolib_add_4bit_chips(s5p6440_gpio_4bit, - ARRAY_SIZE(s5p6440_gpio_4bit)); - - samsung_gpiolib_add_4bit2_chips(s5p6440_gpio_4bit2, - ARRAY_SIZE(s5p6440_gpio_4bit2)); - - s5p64x0_gpio_add_rbank_4bit2(s5p6440_gpio_rbank_4bit2, - ARRAY_SIZE(s5p6440_gpio_rbank_4bit2)); - } - - return 0; -} -core_initcall(s5p64x0_gpiolib_init); diff --git a/drivers/gpio/gpio-s5pc100.c b/drivers/gpio/gpio-s5pc100.c deleted file mode 100644 index 7f87b0c76e0..00000000000 --- a/drivers/gpio/gpio-s5pc100.c +++ /dev/null @@ -1,354 +0,0 @@ -/* - * S5PC100 - GPIOlib support - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright 2009 Samsung Electronics Co - * Kyungmin Park - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include - -#include -#include - -#include -#include -#include - -/* S5PC100 GPIO bank summary: - * - * Bank GPIOs Style INT Type - * A0 8 4Bit GPIO_INT0 - * A1 5 4Bit GPIO_INT1 - * B 8 4Bit GPIO_INT2 - * C 5 4Bit GPIO_INT3 - * D 7 4Bit GPIO_INT4 - * E0 8 4Bit GPIO_INT5 - * E1 6 4Bit GPIO_INT6 - * F0 8 4Bit GPIO_INT7 - * F1 8 4Bit GPIO_INT8 - * F2 8 4Bit GPIO_INT9 - * F3 4 4Bit GPIO_INT10 - * G0 8 4Bit GPIO_INT11 - * G1 3 4Bit GPIO_INT12 - * G2 7 4Bit GPIO_INT13 - * G3 7 4Bit GPIO_INT14 - * H0 8 4Bit WKUP_INT - * H1 8 4Bit WKUP_INT - * H2 8 4Bit WKUP_INT - * H3 8 4Bit WKUP_INT - * I 8 4Bit GPIO_INT15 - * J0 8 4Bit GPIO_INT16 - * J1 5 4Bit GPIO_INT17 - * J2 8 4Bit GPIO_INT18 - * J3 8 4Bit GPIO_INT19 - * J4 4 4Bit GPIO_INT20 - * K0 8 4Bit None - * K1 6 4Bit None - * K2 8 4Bit None - * K3 8 4Bit None - * L0 8 4Bit None - * L1 8 4Bit None - * L2 8 4Bit None - * L3 8 4Bit None - */ - -static struct s3c_gpio_cfg gpio_cfg = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_cfg_eint = { - .cfg_eint = 0xf, - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_cfg_noint = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -/* - * GPIO bank's base address given the index of the bank in the - * list of all gpio banks. - */ -#define S5PC100_BANK_BASE(bank_nr) (S5P_VA_GPIO + ((bank_nr) * 0x20)) - -/* - * Following are the gpio banks in S5PC100. - * - * The 'config' member when left to NULL, is initialized to the default - * structure gpio_cfg in the init function below. - * - * The 'base' member is also initialized in the init function below. - * Note: The initialization of 'base' member of s3c_gpio_chip structure - * uses the above macro and depends on the banks being listed in order here. - */ -static struct s3c_gpio_chip s5pc100_gpio_chips[] = { - { - .chip = { - .base = S5PC100_GPA0(0), - .ngpio = S5PC100_GPIO_A0_NR, - .label = "GPA0", - }, - }, { - .chip = { - .base = S5PC100_GPA1(0), - .ngpio = S5PC100_GPIO_A1_NR, - .label = "GPA1", - }, - }, { - .chip = { - .base = S5PC100_GPB(0), - .ngpio = S5PC100_GPIO_B_NR, - .label = "GPB", - }, - }, { - .chip = { - .base = S5PC100_GPC(0), - .ngpio = S5PC100_GPIO_C_NR, - .label = "GPC", - }, - }, { - .chip = { - .base = S5PC100_GPD(0), - .ngpio = S5PC100_GPIO_D_NR, - .label = "GPD", - }, - }, { - .chip = { - .base = S5PC100_GPE0(0), - .ngpio = S5PC100_GPIO_E0_NR, - .label = "GPE0", - }, - }, { - .chip = { - .base = S5PC100_GPE1(0), - .ngpio = S5PC100_GPIO_E1_NR, - .label = "GPE1", - }, - }, { - .chip = { - .base = S5PC100_GPF0(0), - .ngpio = S5PC100_GPIO_F0_NR, - .label = "GPF0", - }, - }, { - .chip = { - .base = S5PC100_GPF1(0), - .ngpio = S5PC100_GPIO_F1_NR, - .label = "GPF1", - }, - }, { - .chip = { - .base = S5PC100_GPF2(0), - .ngpio = S5PC100_GPIO_F2_NR, - .label = "GPF2", - }, - }, { - .chip = { - .base = S5PC100_GPF3(0), - .ngpio = S5PC100_GPIO_F3_NR, - .label = "GPF3", - }, - }, { - .chip = { - .base = S5PC100_GPG0(0), - .ngpio = S5PC100_GPIO_G0_NR, - .label = "GPG0", - }, - }, { - .chip = { - .base = S5PC100_GPG1(0), - .ngpio = S5PC100_GPIO_G1_NR, - .label = "GPG1", - }, - }, { - .chip = { - .base = S5PC100_GPG2(0), - .ngpio = S5PC100_GPIO_G2_NR, - .label = "GPG2", - }, - }, { - .chip = { - .base = S5PC100_GPG3(0), - .ngpio = S5PC100_GPIO_G3_NR, - .label = "GPG3", - }, - }, { - .chip = { - .base = S5PC100_GPI(0), - .ngpio = S5PC100_GPIO_I_NR, - .label = "GPI", - }, - }, { - .chip = { - .base = S5PC100_GPJ0(0), - .ngpio = S5PC100_GPIO_J0_NR, - .label = "GPJ0", - }, - }, { - .chip = { - .base = S5PC100_GPJ1(0), - .ngpio = S5PC100_GPIO_J1_NR, - .label = "GPJ1", - }, - }, { - .chip = { - .base = S5PC100_GPJ2(0), - .ngpio = S5PC100_GPIO_J2_NR, - .label = "GPJ2", - }, - }, { - .chip = { - .base = S5PC100_GPJ3(0), - .ngpio = S5PC100_GPIO_J3_NR, - .label = "GPJ3", - }, - }, { - .chip = { - .base = S5PC100_GPJ4(0), - .ngpio = S5PC100_GPIO_J4_NR, - .label = "GPJ4", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPK0(0), - .ngpio = S5PC100_GPIO_K0_NR, - .label = "GPK0", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPK1(0), - .ngpio = S5PC100_GPIO_K1_NR, - .label = "GPK1", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPK2(0), - .ngpio = S5PC100_GPIO_K2_NR, - .label = "GPK2", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPK3(0), - .ngpio = S5PC100_GPIO_K3_NR, - .label = "GPK3", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPL0(0), - .ngpio = S5PC100_GPIO_L0_NR, - .label = "GPL0", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPL1(0), - .ngpio = S5PC100_GPIO_L1_NR, - .label = "GPL1", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPL2(0), - .ngpio = S5PC100_GPIO_L2_NR, - .label = "GPL2", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPL3(0), - .ngpio = S5PC100_GPIO_L3_NR, - .label = "GPL3", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPL4(0), - .ngpio = S5PC100_GPIO_L4_NR, - .label = "GPL4", - }, - }, { - .base = (S5P_VA_GPIO + 0xC00), - .config = &gpio_cfg_eint, - .irq_base = IRQ_EINT(0), - .chip = { - .base = S5PC100_GPH0(0), - .ngpio = S5PC100_GPIO_H0_NR, - .label = "GPH0", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO + 0xC20), - .config = &gpio_cfg_eint, - .irq_base = IRQ_EINT(8), - .chip = { - .base = S5PC100_GPH1(0), - .ngpio = S5PC100_GPIO_H1_NR, - .label = "GPH1", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO + 0xC40), - .config = &gpio_cfg_eint, - .irq_base = IRQ_EINT(16), - .chip = { - .base = S5PC100_GPH2(0), - .ngpio = S5PC100_GPIO_H2_NR, - .label = "GPH2", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO + 0xC60), - .config = &gpio_cfg_eint, - .irq_base = IRQ_EINT(24), - .chip = { - .base = S5PC100_GPH3(0), - .ngpio = S5PC100_GPIO_H3_NR, - .label = "GPH3", - .to_irq = samsung_gpiolib_to_irq, - }, - }, -}; - -static __init int s5pc100_gpiolib_init(void) -{ - struct s3c_gpio_chip *chip = s5pc100_gpio_chips; - int nr_chips = ARRAY_SIZE(s5pc100_gpio_chips); - int gpioint_group = 0; - int i; - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) { - chip->config = &gpio_cfg; - chip->group = gpioint_group++; - } - if (chip->base == NULL) - chip->base = S5PC100_BANK_BASE(i); - } - - samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips, nr_chips); - s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR); - - return 0; -} -core_initcall(s5pc100_gpiolib_init); diff --git a/drivers/gpio/gpio-s5pv210.c b/drivers/gpio/gpio-s5pv210.c deleted file mode 100644 index eb12f1602de..00000000000 --- a/drivers/gpio/gpio-s5pv210.c +++ /dev/null @@ -1,287 +0,0 @@ -/* - * S5PV210 - GPIOlib support - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -static struct s3c_gpio_cfg gpio_cfg = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_cfg_noint = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -/* GPIO bank's base address given the index of the bank in the - * list of all gpio banks. - */ -#define S5PV210_BANK_BASE(bank_nr) (S5P_VA_GPIO + ((bank_nr) * 0x20)) - -/* - * Following are the gpio banks in v210. - * - * The 'config' member when left to NULL, is initialized to the default - * structure gpio_cfg in the init function below. - * - * The 'base' member is also initialized in the init function below. - * Note: The initialization of 'base' member of s3c_gpio_chip structure - * uses the above macro and depends on the banks being listed in order here. - */ -static struct s3c_gpio_chip s5pv210_gpio_4bit[] = { - { - .chip = { - .base = S5PV210_GPA0(0), - .ngpio = S5PV210_GPIO_A0_NR, - .label = "GPA0", - }, - }, { - .chip = { - .base = S5PV210_GPA1(0), - .ngpio = S5PV210_GPIO_A1_NR, - .label = "GPA1", - }, - }, { - .chip = { - .base = S5PV210_GPB(0), - .ngpio = S5PV210_GPIO_B_NR, - .label = "GPB", - }, - }, { - .chip = { - .base = S5PV210_GPC0(0), - .ngpio = S5PV210_GPIO_C0_NR, - .label = "GPC0", - }, - }, { - .chip = { - .base = S5PV210_GPC1(0), - .ngpio = S5PV210_GPIO_C1_NR, - .label = "GPC1", - }, - }, { - .chip = { - .base = S5PV210_GPD0(0), - .ngpio = S5PV210_GPIO_D0_NR, - .label = "GPD0", - }, - }, { - .chip = { - .base = S5PV210_GPD1(0), - .ngpio = S5PV210_GPIO_D1_NR, - .label = "GPD1", - }, - }, { - .chip = { - .base = S5PV210_GPE0(0), - .ngpio = S5PV210_GPIO_E0_NR, - .label = "GPE0", - }, - }, { - .chip = { - .base = S5PV210_GPE1(0), - .ngpio = S5PV210_GPIO_E1_NR, - .label = "GPE1", - }, - }, { - .chip = { - .base = S5PV210_GPF0(0), - .ngpio = S5PV210_GPIO_F0_NR, - .label = "GPF0", - }, - }, { - .chip = { - .base = S5PV210_GPF1(0), - .ngpio = S5PV210_GPIO_F1_NR, - .label = "GPF1", - }, - }, { - .chip = { - .base = S5PV210_GPF2(0), - .ngpio = S5PV210_GPIO_F2_NR, - .label = "GPF2", - }, - }, { - .chip = { - .base = S5PV210_GPF3(0), - .ngpio = S5PV210_GPIO_F3_NR, - .label = "GPF3", - }, - }, { - .chip = { - .base = S5PV210_GPG0(0), - .ngpio = S5PV210_GPIO_G0_NR, - .label = "GPG0", - }, - }, { - .chip = { - .base = S5PV210_GPG1(0), - .ngpio = S5PV210_GPIO_G1_NR, - .label = "GPG1", - }, - }, { - .chip = { - .base = S5PV210_GPG2(0), - .ngpio = S5PV210_GPIO_G2_NR, - .label = "GPG2", - }, - }, { - .chip = { - .base = S5PV210_GPG3(0), - .ngpio = S5PV210_GPIO_G3_NR, - .label = "GPG3", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PV210_GPI(0), - .ngpio = S5PV210_GPIO_I_NR, - .label = "GPI", - }, - }, { - .chip = { - .base = S5PV210_GPJ0(0), - .ngpio = S5PV210_GPIO_J0_NR, - .label = "GPJ0", - }, - }, { - .chip = { - .base = S5PV210_GPJ1(0), - .ngpio = S5PV210_GPIO_J1_NR, - .label = "GPJ1", - }, - }, { - .chip = { - .base = S5PV210_GPJ2(0), - .ngpio = S5PV210_GPIO_J2_NR, - .label = "GPJ2", - }, - }, { - .chip = { - .base = S5PV210_GPJ3(0), - .ngpio = S5PV210_GPIO_J3_NR, - .label = "GPJ3", - }, - }, { - .chip = { - .base = S5PV210_GPJ4(0), - .ngpio = S5PV210_GPIO_J4_NR, - .label = "GPJ4", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PV210_MP01(0), - .ngpio = S5PV210_GPIO_MP01_NR, - .label = "MP01", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PV210_MP02(0), - .ngpio = S5PV210_GPIO_MP02_NR, - .label = "MP02", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PV210_MP03(0), - .ngpio = S5PV210_GPIO_MP03_NR, - .label = "MP03", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PV210_MP04(0), - .ngpio = S5PV210_GPIO_MP04_NR, - .label = "MP04", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PV210_MP05(0), - .ngpio = S5PV210_GPIO_MP05_NR, - .label = "MP05", - }, - }, { - .base = (S5P_VA_GPIO + 0xC00), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(0), - .chip = { - .base = S5PV210_GPH0(0), - .ngpio = S5PV210_GPIO_H0_NR, - .label = "GPH0", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO + 0xC20), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(8), - .chip = { - .base = S5PV210_GPH1(0), - .ngpio = S5PV210_GPIO_H1_NR, - .label = "GPH1", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO + 0xC40), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(16), - .chip = { - .base = S5PV210_GPH2(0), - .ngpio = S5PV210_GPIO_H2_NR, - .label = "GPH2", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO + 0xC60), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(24), - .chip = { - .base = S5PV210_GPH3(0), - .ngpio = S5PV210_GPIO_H3_NR, - .label = "GPH3", - .to_irq = samsung_gpiolib_to_irq, - }, - }, -}; - -static __init int s5pv210_gpiolib_init(void) -{ - struct s3c_gpio_chip *chip = s5pv210_gpio_4bit; - int nr_chips = ARRAY_SIZE(s5pv210_gpio_4bit); - int gpioint_group = 0; - int i = 0; - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) { - chip->config = &gpio_cfg; - chip->group = gpioint_group++; - } - if (chip->base == NULL) - chip->base = S5PV210_BANK_BASE(i); - } - - samsung_gpiolib_add_4bit_chips(s5pv210_gpio_4bit, nr_chips); - s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR); - - return 0; -} -core_initcall(s5pv210_gpiolib_init); diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c new file mode 100644 index 00000000000..36f3675e7de --- /dev/null +++ b/drivers/gpio/gpio-samsung.c @@ -0,0 +1,2686 @@ +/* + * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks + * http://armlinux.simtec.co.uk/ + * + * SAMSUNG - GPIOlib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#ifndef DEBUG_GPIO +#define gpio_dbg(x...) do { } while (0) +#else +#define gpio_dbg(x...) printk(KERN_DEBUG x) +#endif + +int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull) +{ + void __iomem *reg = chip->base + 0x08; + int shift = off * 2; + u32 pup; + + pup = __raw_readl(reg); + pup &= ~(3 << shift); + pup |= pull << shift; + __raw_writel(pup, reg); + + return 0; +} + +samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip, + unsigned int off) +{ + void __iomem *reg = chip->base + 0x08; + int shift = off * 2; + u32 pup = __raw_readl(reg); + + pup >>= shift; + pup &= 0x3; + + return (__force samsung_gpio_pull_t)pup; +} + +int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull) +{ + switch (pull) { + case S3C_GPIO_PULL_NONE: + pull = 0x01; + break; + case S3C_GPIO_PULL_UP: + pull = 0x00; + break; + case S3C_GPIO_PULL_DOWN: + pull = 0x02; + break; + } + return samsung_gpio_setpull_updown(chip, off, pull); +} + +samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip, + unsigned int off) +{ + samsung_gpio_pull_t pull; + + pull = samsung_gpio_getpull_updown(chip, off); + + switch (pull) { + case 0x00: + pull = S3C_GPIO_PULL_UP; + break; + case 0x01: + case 0x03: + pull = S3C_GPIO_PULL_NONE; + break; + case 0x02: + pull = S3C_GPIO_PULL_DOWN; + break; + } + + return pull; +} + +static int s3c24xx_gpio_setpull_1(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull, + samsung_gpio_pull_t updown) +{ + void __iomem *reg = chip->base + 0x08; + u32 pup = __raw_readl(reg); + + if (pull == updown) + pup &= ~(1 << off); + else if (pull == S3C_GPIO_PULL_NONE) + pup |= (1 << off); + else + return -EINVAL; + + __raw_writel(pup, reg); + return 0; +} + +static samsung_gpio_pull_t s3c24xx_gpio_getpull_1(struct samsung_gpio_chip *chip, + unsigned int off, + samsung_gpio_pull_t updown) +{ + void __iomem *reg = chip->base + 0x08; + u32 pup = __raw_readl(reg); + + pup &= (1 << off); + return pup ? S3C_GPIO_PULL_NONE : updown; +} + +samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip, + unsigned int off) +{ + return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP); +} + +int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull) +{ + return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP); +} + +samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip, + unsigned int off) +{ + return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN); +} + +int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull) +{ + return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN); +} + +static int exynos4_gpio_setpull(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull) +{ + if (pull == S3C_GPIO_PULL_UP) + pull = 3; + + return samsung_gpio_setpull_updown(chip, off, pull); +} + +static samsung_gpio_pull_t exynos4_gpio_getpull(struct samsung_gpio_chip *chip, + unsigned int off) +{ + samsung_gpio_pull_t pull; + + pull = samsung_gpio_getpull_updown(chip, off); + + if (pull == 3) + pull = S3C_GPIO_PULL_UP; + + return pull; +} + +/* + * samsung_gpio_setcfg_2bit - Samsung 2bit style GPIO configuration. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @cfg: The configuration value to set. + * + * This helper deal with the GPIO cases where the control register + * has two bits of configuration per gpio, which have the following + * functions: + * 00 = input + * 01 = output + * 1x = special function + */ + +static int samsung_gpio_setcfg_2bit(struct samsung_gpio_chip *chip, + unsigned int off, unsigned int cfg) +{ + void __iomem *reg = chip->base; + unsigned int shift = off * 2; + u32 con; + + if (samsung_gpio_is_cfg_special(cfg)) { + cfg &= 0xf; + if (cfg > 3) + return -EINVAL; + + cfg <<= shift; + } + + con = __raw_readl(reg); + con &= ~(0x3 << shift); + con |= cfg; + __raw_writel(con, reg); + + return 0; +} + +/* + * samsung_gpio_getcfg_2bit - Samsung 2bit style GPIO configuration read. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * + * The reverse of samsung_gpio_setcfg_2bit(). Will return a value whicg + * could be directly passed back to samsung_gpio_setcfg_2bit(), from the + * S3C_GPIO_SPECIAL() macro. + */ + +static unsigned int samsung_gpio_getcfg_2bit(struct samsung_gpio_chip *chip, + unsigned int off) +{ + u32 con; + + con = __raw_readl(chip->base); + con >>= off * 2; + con &= 3; + + /* this conversion works for IN and OUT as well as special mode */ + return S3C_GPIO_SPECIAL(con); +} + +/* + * samsung_gpio_setcfg_4bit - Samsung 4bit single register GPIO config. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @cfg: The configuration value to set. + * + * This helper deal with the GPIO cases where the control register has 4 bits + * of control per GPIO, generally in the form of: + * 0000 = Input + * 0001 = Output + * others = Special functions (dependent on bank) + * + * Note, since the code to deal with the case where there are two control + * registers instead of one, we do not have a separate set of functions for + * each case. + */ + +static int samsung_gpio_setcfg_4bit(struct samsung_gpio_chip *chip, + unsigned int off, unsigned int cfg) +{ + void __iomem *reg = chip->base; + unsigned int shift = (off & 7) * 4; + u32 con; + + if (off < 8 && chip->chip.ngpio > 8) + reg -= 4; + + if (samsung_gpio_is_cfg_special(cfg)) { + cfg &= 0xf; + cfg <<= shift; + } + + con = __raw_readl(reg); + con &= ~(0xf << shift); + con |= cfg; + __raw_writel(con, reg); + + return 0; +} + +/* + * samsung_gpio_getcfg_4bit - Samsung 4bit single register GPIO config read. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * + * The reverse of samsung_gpio_setcfg_4bit(), turning a gpio configuration + * register setting into a value the software can use, such as could be passed + * to samsung_gpio_setcfg_4bit(). + * + * @sa samsung_gpio_getcfg_2bit + */ + +static unsigned samsung_gpio_getcfg_4bit(struct samsung_gpio_chip *chip, + unsigned int off) +{ + void __iomem *reg = chip->base; + unsigned int shift = (off & 7) * 4; + u32 con; + + if (off < 8 && chip->chip.ngpio > 8) + reg -= 4; + + con = __raw_readl(reg); + con >>= shift; + con &= 0xf; + + /* this conversion works for IN and OUT as well as special mode */ + return S3C_GPIO_SPECIAL(con); +} + +/* + * s3c24xx_gpio_setcfg_abank - S3C24XX style GPIO configuration (Bank A) + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @cfg: The configuration value to set. + * + * This helper deal with the GPIO cases where the control register + * has one bit of configuration for the gpio, where setting the bit + * means the pin is in special function mode and unset means output. + */ + +static int s3c24xx_gpio_setcfg_abank(struct samsung_gpio_chip *chip, + unsigned int off, unsigned int cfg) +{ + void __iomem *reg = chip->base; + unsigned int shift = off; + u32 con; + + if (samsung_gpio_is_cfg_special(cfg)) { + cfg &= 0xf; + + /* Map output to 0, and SFN2 to 1 */ + cfg -= 1; + if (cfg > 1) + return -EINVAL; + + cfg <<= shift; + } + + con = __raw_readl(reg); + con &= ~(0x1 << shift); + con |= cfg; + __raw_writel(con, reg); + + return 0; +} + +/* + * s3c24xx_gpio_getcfg_abank - S3C24XX style GPIO configuration read (Bank A) + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * + * The reverse of s3c24xx_gpio_setcfg_abank() turning an GPIO into a usable + * GPIO configuration value. + * + * @sa samsung_gpio_getcfg_2bit + * @sa samsung_gpio_getcfg_4bit + */ + +static unsigned s3c24xx_gpio_getcfg_abank(struct samsung_gpio_chip *chip, + unsigned int off) +{ + u32 con; + + con = __raw_readl(chip->base); + con >>= off; + con &= 1; + con++; + + return S3C_GPIO_SFN(con); +} + +static int s5p64x0_gpio_setcfg_rbank(struct samsung_gpio_chip *chip, + unsigned int off, unsigned int cfg) +{ + void __iomem *reg = chip->base; + unsigned int shift; + u32 con; + + switch (off) { + case 0: + case 1: + case 2: + case 3: + case 4: + case 5: + shift = (off & 7) * 4; + reg -= 4; + break; + case 6: + shift = ((off + 1) & 7) * 4; + reg -= 4; + default: + shift = ((off + 1) & 7) * 4; + break; + } + + if (samsung_gpio_is_cfg_special(cfg)) { + cfg &= 0xf; + cfg <<= shift; + } + + con = __raw_readl(reg); + con &= ~(0xf << shift); + con |= cfg; + __raw_writel(con, reg); + + return 0; +} + +static void __init samsung_gpiolib_set_cfg(struct samsung_gpio_cfg *chipcfg, + int nr_chips) +{ + for (; nr_chips > 0; nr_chips--, chipcfg++) { + if (!chipcfg->set_config) + chipcfg->set_config = samsung_gpio_setcfg_4bit; + if (!chipcfg->get_config) + chipcfg->get_config = samsung_gpio_getcfg_4bit; + if (!chipcfg->set_pull) + chipcfg->set_pull = samsung_gpio_setpull_updown; + if (!chipcfg->get_pull) + chipcfg->get_pull = samsung_gpio_getpull_updown; + } +} + +struct samsung_gpio_cfg s3c24xx_gpiocfg_default = { + .set_config = samsung_gpio_setcfg_2bit, + .get_config = samsung_gpio_getcfg_2bit, +}; + +static struct samsung_gpio_cfg s3c24xx_gpiocfg_banka = { + .set_config = s3c24xx_gpio_setcfg_abank, + .get_config = s3c24xx_gpio_getcfg_abank, +}; + +static struct samsung_gpio_cfg exynos4_gpio_cfg = { + .set_pull = exynos4_gpio_setpull, + .get_pull = exynos4_gpio_getpull, +}; + +static struct samsung_gpio_cfg s5p64x0_gpio_cfg_rbank = { + .cfg_eint = 0x3, + .set_config = s5p64x0_gpio_setcfg_rbank, + .get_config = samsung_gpio_getcfg_4bit, + .set_pull = samsung_gpio_setpull_updown, + .get_pull = samsung_gpio_getpull_updown, +}; + +static struct samsung_gpio_cfg samsung_gpio_cfgs[] = { + { + .cfg_eint = 0x0, + }, { + .cfg_eint = 0x3, + }, { + .cfg_eint = 0x7, + }, { + .cfg_eint = 0xF, + }, { + .cfg_eint = 0x0, + .set_config = samsung_gpio_setcfg_2bit, + .get_config = samsung_gpio_getcfg_2bit, + }, { + .cfg_eint = 0x2, + .set_config = samsung_gpio_setcfg_2bit, + .get_config = samsung_gpio_getcfg_2bit, + }, { + .cfg_eint = 0x3, + .set_config = samsung_gpio_setcfg_2bit, + .get_config = samsung_gpio_getcfg_2bit, + }, { + .set_config = samsung_gpio_setcfg_2bit, + .get_config = samsung_gpio_getcfg_2bit, + }, +}; + +/* + * Default routines for controlling GPIO, based on the original S3C24XX + * GPIO functions which deal with the case where each gpio bank of the + * chip is as following: + * + * base + 0x00: Control register, 2 bits per gpio + * gpio n: 2 bits starting at (2*n) + * 00 = input, 01 = output, others mean special-function + * base + 0x04: Data register, 1 bit per gpio + * bit n: data bit n +*/ + +static int samsung_gpiolib_2bit_input(struct gpio_chip *chip, unsigned offset) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long flags; + unsigned long con; + + samsung_gpio_lock(ourchip, flags); + + con = __raw_readl(base + 0x00); + con &= ~(3 << (offset * 2)); + + __raw_writel(con, base + 0x00); + + samsung_gpio_unlock(ourchip, flags); + return 0; +} + +static int samsung_gpiolib_2bit_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long flags; + unsigned long dat; + unsigned long con; + + samsung_gpio_lock(ourchip, flags); + + dat = __raw_readl(base + 0x04); + dat &= ~(1 << offset); + if (value) + dat |= 1 << offset; + __raw_writel(dat, base + 0x04); + + con = __raw_readl(base + 0x00); + con &= ~(3 << (offset * 2)); + con |= 1 << (offset * 2); + + __raw_writel(con, base + 0x00); + __raw_writel(dat, base + 0x04); + + samsung_gpio_unlock(ourchip, flags); + return 0; +} + +/* + * The samsung_gpiolib_4bit routines are to control the gpio banks where + * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the + * following example: + * + * base + 0x00: Control register, 4 bits per gpio + * gpio n: 4 bits starting at (4*n) + * 0000 = input, 0001 = output, others mean special-function + * base + 0x04: Data register, 1 bit per gpio + * bit n: data bit n + * + * Note, since the data register is one bit per gpio and is at base + 0x4 + * we can use samsung_gpiolib_get and samsung_gpiolib_set to change the + * state of the output. + */ + +static int samsung_gpiolib_4bit_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long con; + + con = __raw_readl(base + GPIOCON_OFF); + con &= ~(0xf << con_4bit_shift(offset)); + __raw_writel(con, base + GPIOCON_OFF); + + gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con); + + return 0; +} + +static int samsung_gpiolib_4bit_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long con; + unsigned long dat; + + con = __raw_readl(base + GPIOCON_OFF); + con &= ~(0xf << con_4bit_shift(offset)); + con |= 0x1 << con_4bit_shift(offset); + + dat = __raw_readl(base + GPIODAT_OFF); + + if (value) + dat |= 1 << offset; + else + dat &= ~(1 << offset); + + __raw_writel(dat, base + GPIODAT_OFF); + __raw_writel(con, base + GPIOCON_OFF); + __raw_writel(dat, base + GPIODAT_OFF); + + gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); + + return 0; +} + +/* + * The next set of routines are for the case where the GPIO configuration + * registers are 4 bits per GPIO but there is more than one register (the + * bank has more than 8 GPIOs. + * + * This case is the similar to the 4 bit case, but the registers are as + * follows: + * + * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs) + * gpio n: 4 bits starting at (4*n) + * 0000 = input, 0001 = output, others mean special-function + * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs) + * gpio n: 4 bits starting at (4*n) + * 0000 = input, 0001 = output, others mean special-function + * base + 0x08: Data register, 1 bit per gpio + * bit n: data bit n + * + * To allow us to use the samsung_gpiolib_get and samsung_gpiolib_set + * routines we store the 'base + 0x4' address so that these routines see + * the data register at ourchip->base + 0x04. + */ + +static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + void __iomem *regcon = base; + unsigned long con; + + if (offset > 7) + offset -= 8; + else + regcon -= 4; + + con = __raw_readl(regcon); + con &= ~(0xf << con_4bit_shift(offset)); + __raw_writel(con, regcon); + + gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con); + + return 0; +} + +static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + void __iomem *regcon = base; + unsigned long con; + unsigned long dat; + unsigned con_offset = offset; + + if (con_offset > 7) + con_offset -= 8; + else + regcon -= 4; + + con = __raw_readl(regcon); + con &= ~(0xf << con_4bit_shift(con_offset)); + con |= 0x1 << con_4bit_shift(con_offset); + + dat = __raw_readl(base + GPIODAT_OFF); + + if (value) + dat |= 1 << offset; + else + dat &= ~(1 << offset); + + __raw_writel(dat, base + GPIODAT_OFF); + __raw_writel(con, regcon); + __raw_writel(dat, base + GPIODAT_OFF); + + gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); + + return 0; +} + +/* The next set of routines are for the case of s3c24xx bank a */ + +static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset) +{ + return -EINVAL; +} + +static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long flags; + unsigned long dat; + unsigned long con; + + local_irq_save(flags); + + con = __raw_readl(base + 0x00); + dat = __raw_readl(base + 0x04); + + dat &= ~(1 << offset); + if (value) + dat |= 1 << offset; + + __raw_writel(dat, base + 0x04); + + con &= ~(1 << offset); + + __raw_writel(con, base + 0x00); + __raw_writel(dat, base + 0x04); + + local_irq_restore(flags); + return 0; +} + +/* The next set of routines are for the case of s5p64x0 bank r */ + +static int s5p64x0_gpiolib_rbank_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + void __iomem *regcon = base; + unsigned long con; + unsigned long flags; + + switch (offset) { + case 6: + offset += 1; + case 0: + case 1: + case 2: + case 3: + case 4: + case 5: + regcon -= 4; + break; + default: + offset -= 7; + break; + } + + samsung_gpio_lock(ourchip, flags); + + con = __raw_readl(regcon); + con &= ~(0xf << con_4bit_shift(offset)); + __raw_writel(con, regcon); + + samsung_gpio_unlock(ourchip, flags); + + return 0; +} + +static int s5p64x0_gpiolib_rbank_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + void __iomem *regcon = base; + unsigned long con; + unsigned long dat; + unsigned long flags; + unsigned con_offset = offset; + + switch (con_offset) { + case 6: + con_offset += 1; + case 0: + case 1: + case 2: + case 3: + case 4: + case 5: + regcon -= 4; + break; + default: + con_offset -= 7; + break; + } + + samsung_gpio_lock(ourchip, flags); + + con = __raw_readl(regcon); + con &= ~(0xf << con_4bit_shift(con_offset)); + con |= 0x1 << con_4bit_shift(con_offset); + + dat = __raw_readl(base + GPIODAT_OFF); + if (value) + dat |= 1 << offset; + else + dat &= ~(1 << offset); + + __raw_writel(con, regcon); + __raw_writel(dat, base + GPIODAT_OFF); + + samsung_gpio_unlock(ourchip, flags); + + return 0; +} + +static void samsung_gpiolib_set(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long flags; + unsigned long dat; + + samsung_gpio_lock(ourchip, flags); + + dat = __raw_readl(base + 0x04); + dat &= ~(1 << offset); + if (value) + dat |= 1 << offset; + __raw_writel(dat, base + 0x04); + + samsung_gpio_unlock(ourchip, flags); +} + +static int samsung_gpiolib_get(struct gpio_chip *chip, unsigned offset) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + unsigned long val; + + val = __raw_readl(ourchip->base + 0x04); + val >>= offset; + val &= 1; + + return val; +} + +/* + * CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios + * for use with the configuration calls, and other parts of the s3c gpiolib + * support code. + * + * Not all s3c support code will need this, as some configurations of cpu + * may only support one or two different configuration options and have an + * easy gpio to samsung_gpio_chip mapping function. If this is the case, then + * the machine support file should provide its own samsung_gpiolib_getchip() + * and any other necessary functions. + */ + +#ifdef CONFIG_S3C_GPIO_TRACK +struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END]; + +static __init void s3c_gpiolib_track(struct samsung_gpio_chip *chip) +{ + unsigned int gpn; + int i; + + gpn = chip->chip.base; + for (i = 0; i < chip->chip.ngpio; i++, gpn++) { + BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios)); + s3c_gpios[gpn] = chip; + } +} +#endif /* CONFIG_S3C_GPIO_TRACK */ + +/* + * samsung_gpiolib_add() - add the Samsung gpio_chip. + * @chip: The chip to register + * + * This is a wrapper to gpiochip_add() that takes our specific gpio chip + * information and makes the necessary alterations for the platform and + * notes the information for use with the configuration systems and any + * other parts of the system. + */ + +static void __init samsung_gpiolib_add(struct samsung_gpio_chip *chip) +{ + struct gpio_chip *gc = &chip->chip; + int ret; + + BUG_ON(!chip->base); + BUG_ON(!gc->label); + BUG_ON(!gc->ngpio); + + spin_lock_init(&chip->lock); + + if (!gc->direction_input) + gc->direction_input = samsung_gpiolib_2bit_input; + if (!gc->direction_output) + gc->direction_output = samsung_gpiolib_2bit_output; + if (!gc->set) + gc->set = samsung_gpiolib_set; + if (!gc->get) + gc->get = samsung_gpiolib_get; + +#ifdef CONFIG_PM + if (chip->pm != NULL) { + if (!chip->pm->save || !chip->pm->resume) + printk(KERN_ERR "gpio: %s has missing PM functions\n", + gc->label); + } else + printk(KERN_ERR "gpio: %s has no PM function\n", gc->label); +#endif + + /* gpiochip_add() prints own failure message on error. */ + ret = gpiochip_add(gc); + if (ret >= 0) + s3c_gpiolib_track(chip); +} + +static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip, + int nr_chips, void __iomem *base) +{ + int i; + struct gpio_chip *gc = &chip->chip; + + for (i = 0 ; i < nr_chips; i++, chip++) { + if (!chip->config) + chip->config = &s3c24xx_gpiocfg_default; + if (!chip->pm) + chip->pm = __gpio_pm(&samsung_gpio_pm_2bit); + if ((base != NULL) && (chip->base == NULL)) + chip->base = base + ((i) * 0x10); + + if (!gc->direction_input) + gc->direction_input = samsung_gpiolib_2bit_input; + if (!gc->direction_output) + gc->direction_output = samsung_gpiolib_2bit_output; + + samsung_gpiolib_add(chip); + } +} + +static void __init samsung_gpiolib_add_2bit_chips(struct samsung_gpio_chip *chip, + int nr_chips, void __iomem *base, + unsigned int offset) +{ + int i; + + for (i = 0 ; i < nr_chips; i++, chip++) { + chip->chip.direction_input = samsung_gpiolib_2bit_input; + chip->chip.direction_output = samsung_gpiolib_2bit_output; + + if (!chip->config) + chip->config = &samsung_gpio_cfgs[7]; + if (!chip->pm) + chip->pm = __gpio_pm(&samsung_gpio_pm_2bit); + if ((base != NULL) && (chip->base == NULL)) + chip->base = base + ((i) * offset); + + samsung_gpiolib_add(chip); + } +} + +/* + * samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config. + * @chip: The gpio chip that is being configured. + * @nr_chips: The no of chips (gpio ports) for the GPIO being configured. + * + * This helper deal with the GPIO cases where the control register has 4 bits + * of control per GPIO, generally in the form of: + * 0000 = Input + * 0001 = Output + * others = Special functions (dependent on bank) + * + * Note, since the code to deal with the case where there are two control + * registers instead of one, we do not have a separate set of function + * (samsung_gpiolib_add_4bit2_chips)for each case. + */ + +static void __init samsung_gpiolib_add_4bit_chips(struct samsung_gpio_chip *chip, + int nr_chips, void __iomem *base) +{ + int i; + + for (i = 0 ; i < nr_chips; i++, chip++) { + chip->chip.direction_input = samsung_gpiolib_4bit_input; + chip->chip.direction_output = samsung_gpiolib_4bit_output; + + if (!chip->config) + chip->config = &samsung_gpio_cfgs[2]; + if (!chip->pm) + chip->pm = __gpio_pm(&samsung_gpio_pm_4bit); + if ((base != NULL) && (chip->base == NULL)) + chip->base = base + ((i) * 0x20); + + samsung_gpiolib_add(chip); + } +} + +static void __init samsung_gpiolib_add_4bit2_chips(struct samsung_gpio_chip *chip, + int nr_chips) +{ + for (; nr_chips > 0; nr_chips--, chip++) { + chip->chip.direction_input = samsung_gpiolib_4bit2_input; + chip->chip.direction_output = samsung_gpiolib_4bit2_output; + + if (!chip->config) + chip->config = &samsung_gpio_cfgs[2]; + if (!chip->pm) + chip->pm = __gpio_pm(&samsung_gpio_pm_4bit); + + samsung_gpiolib_add(chip); + } +} + +static void __init s5p64x0_gpiolib_add_rbank(struct samsung_gpio_chip *chip, + int nr_chips) +{ + for (; nr_chips > 0; nr_chips--, chip++) { + chip->chip.direction_input = s5p64x0_gpiolib_rbank_input; + chip->chip.direction_output = s5p64x0_gpiolib_rbank_output; + + if (!chip->pm) + chip->pm = __gpio_pm(&samsung_gpio_pm_4bit); + + samsung_gpiolib_add(chip); + } +} + +int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset) +{ + struct samsung_gpio_chip *samsung_chip = container_of(chip, struct samsung_gpio_chip, chip); + + return samsung_chip->irq_base + offset; +} + +#ifdef CONFIG_PLAT_S3C24XX +static int s3c24xx_gpiolib_fbank_to_irq(struct gpio_chip *chip, unsigned offset) +{ + if (offset < 4) + return IRQ_EINT0 + offset; + + if (offset < 8) + return IRQ_EINT4 + offset - 4; + + return -EINVAL; +} +#endif + +#ifdef CONFIG_PLAT_S3C64XX +static int s3c64xx_gpiolib_mbank_to_irq(struct gpio_chip *chip, unsigned pin) +{ + return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO; +} + +static int s3c64xx_gpiolib_lbank_to_irq(struct gpio_chip *chip, unsigned pin) +{ + return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO; +} +#endif + +struct samsung_gpio_chip s3c24xx_gpios[] = { +#ifdef CONFIG_PLAT_S3C24XX + { + .config = &s3c24xx_gpiocfg_banka, + .chip = { + .base = S3C2410_GPA(0), + .owner = THIS_MODULE, + .label = "GPIOA", + .ngpio = 24, + .direction_input = s3c24xx_gpiolib_banka_input, + .direction_output = s3c24xx_gpiolib_banka_output, + }, + }, { + .chip = { + .base = S3C2410_GPB(0), + .owner = THIS_MODULE, + .label = "GPIOB", + .ngpio = 16, + }, + }, { + .chip = { + .base = S3C2410_GPC(0), + .owner = THIS_MODULE, + .label = "GPIOC", + .ngpio = 16, + }, + }, { + .chip = { + .base = S3C2410_GPD(0), + .owner = THIS_MODULE, + .label = "GPIOD", + .ngpio = 16, + }, + }, { + .chip = { + .base = S3C2410_GPE(0), + .label = "GPIOE", + .owner = THIS_MODULE, + .ngpio = 16, + }, + }, { + .chip = { + .base = S3C2410_GPF(0), + .owner = THIS_MODULE, + .label = "GPIOF", + .ngpio = 8, + .to_irq = s3c24xx_gpiolib_fbank_to_irq, + }, + }, { + .irq_base = IRQ_EINT8, + .chip = { + .base = S3C2410_GPG(0), + .owner = THIS_MODULE, + .label = "GPIOG", + .ngpio = 16, + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .chip = { + .base = S3C2410_GPH(0), + .owner = THIS_MODULE, + .label = "GPIOH", + .ngpio = 11, + }, + }, + /* GPIOS for the S3C2443 and later devices. */ + { + .base = S3C2440_GPJCON, + .chip = { + .base = S3C2410_GPJ(0), + .owner = THIS_MODULE, + .label = "GPIOJ", + .ngpio = 16, + }, + }, { + .base = S3C2443_GPKCON, + .chip = { + .base = S3C2410_GPK(0), + .owner = THIS_MODULE, + .label = "GPIOK", + .ngpio = 16, + }, + }, { + .base = S3C2443_GPLCON, + .chip = { + .base = S3C2410_GPL(0), + .owner = THIS_MODULE, + .label = "GPIOL", + .ngpio = 15, + }, + }, { + .base = S3C2443_GPMCON, + .chip = { + .base = S3C2410_GPM(0), + .owner = THIS_MODULE, + .label = "GPIOM", + .ngpio = 2, + }, + }, +#endif +}; + +/* + * GPIO bank summary: + * + * Bank GPIOs Style SlpCon ExtInt Group + * A 8 4Bit Yes 1 + * B 7 4Bit Yes 1 + * C 8 4Bit Yes 2 + * D 5 4Bit Yes 3 + * E 5 4Bit Yes None + * F 16 2Bit Yes 4 [1] + * G 7 4Bit Yes 5 + * H 10 4Bit[2] Yes 6 + * I 16 2Bit Yes None + * J 12 2Bit Yes None + * K 16 4Bit[2] No None + * L 15 4Bit[2] No None + * M 6 4Bit No IRQ_EINT + * N 16 2Bit No IRQ_EINT + * O 16 2Bit Yes 7 + * P 15 2Bit Yes 8 + * Q 9 2Bit Yes 9 + * + * [1] BANKF pins 14,15 do not form part of the external interrupt sources + * [2] BANK has two control registers, GPxCON0 and GPxCON1 + */ + +static struct samsung_gpio_chip s3c64xx_gpios_4bit[] = { +#ifdef CONFIG_PLAT_S3C64XX + { + .chip = { + .base = S3C64XX_GPA(0), + .ngpio = S3C64XX_GPIO_A_NR, + .label = "GPA", + }, + }, { + .chip = { + .base = S3C64XX_GPB(0), + .ngpio = S3C64XX_GPIO_B_NR, + .label = "GPB", + }, + }, { + .chip = { + .base = S3C64XX_GPC(0), + .ngpio = S3C64XX_GPIO_C_NR, + .label = "GPC", + }, + }, { + .chip = { + .base = S3C64XX_GPD(0), + .ngpio = S3C64XX_GPIO_D_NR, + .label = "GPD", + }, + }, { + .config = &samsung_gpio_cfgs[0], + .chip = { + .base = S3C64XX_GPE(0), + .ngpio = S3C64XX_GPIO_E_NR, + .label = "GPE", + }, + }, { + .base = S3C64XX_GPG_BASE, + .chip = { + .base = S3C64XX_GPG(0), + .ngpio = S3C64XX_GPIO_G_NR, + .label = "GPG", + }, + }, { + .base = S3C64XX_GPM_BASE, + .config = &samsung_gpio_cfgs[1], + .chip = { + .base = S3C64XX_GPM(0), + .ngpio = S3C64XX_GPIO_M_NR, + .label = "GPM", + .to_irq = s3c64xx_gpiolib_mbank_to_irq, + }, + }, +#endif +}; + +static struct samsung_gpio_chip s3c64xx_gpios_4bit2[] = { +#ifdef CONFIG_PLAT_S3C64XX + { + .base = S3C64XX_GPH_BASE + 0x4, + .chip = { + .base = S3C64XX_GPH(0), + .ngpio = S3C64XX_GPIO_H_NR, + .label = "GPH", + }, + }, { + .base = S3C64XX_GPK_BASE + 0x4, + .config = &samsung_gpio_cfgs[0], + .chip = { + .base = S3C64XX_GPK(0), + .ngpio = S3C64XX_GPIO_K_NR, + .label = "GPK", + }, + }, { + .base = S3C64XX_GPL_BASE + 0x4, + .config = &samsung_gpio_cfgs[1], + .chip = { + .base = S3C64XX_GPL(0), + .ngpio = S3C64XX_GPIO_L_NR, + .label = "GPL", + .to_irq = s3c64xx_gpiolib_lbank_to_irq, + }, + }, +#endif +}; + +static struct samsung_gpio_chip s3c64xx_gpios_2bit[] = { +#ifdef CONFIG_PLAT_S3C64XX + { + .base = S3C64XX_GPF_BASE, + .config = &samsung_gpio_cfgs[6], + .chip = { + .base = S3C64XX_GPF(0), + .ngpio = S3C64XX_GPIO_F_NR, + .label = "GPF", + }, + }, { + .config = &samsung_gpio_cfgs[7], + .chip = { + .base = S3C64XX_GPI(0), + .ngpio = S3C64XX_GPIO_I_NR, + .label = "GPI", + }, + }, { + .config = &samsung_gpio_cfgs[7], + .chip = { + .base = S3C64XX_GPJ(0), + .ngpio = S3C64XX_GPIO_J_NR, + .label = "GPJ", + }, + }, { + .config = &samsung_gpio_cfgs[6], + .chip = { + .base = S3C64XX_GPO(0), + .ngpio = S3C64XX_GPIO_O_NR, + .label = "GPO", + }, + }, { + .config = &samsung_gpio_cfgs[6], + .chip = { + .base = S3C64XX_GPP(0), + .ngpio = S3C64XX_GPIO_P_NR, + .label = "GPP", + }, + }, { + .config = &samsung_gpio_cfgs[6], + .chip = { + .base = S3C64XX_GPQ(0), + .ngpio = S3C64XX_GPIO_Q_NR, + .label = "GPQ", + }, + }, { + .base = S3C64XX_GPN_BASE, + .irq_base = IRQ_EINT(0), + .config = &samsung_gpio_cfgs[5], + .chip = { + .base = S3C64XX_GPN(0), + .ngpio = S3C64XX_GPIO_N_NR, + .label = "GPN", + .to_irq = samsung_gpiolib_to_irq, + }, + }, +#endif +}; + +/* + * S5P6440 GPIO bank summary: + * + * Bank GPIOs Style SlpCon ExtInt Group + * A 6 4Bit Yes 1 + * B 7 4Bit Yes 1 + * C 8 4Bit Yes 2 + * F 2 2Bit Yes 4 [1] + * G 7 4Bit Yes 5 + * H 10 4Bit[2] Yes 6 + * I 16 2Bit Yes None + * J 12 2Bit Yes None + * N 16 2Bit No IRQ_EINT + * P 8 2Bit Yes 8 + * R 15 4Bit[2] Yes 8 + */ + +static struct samsung_gpio_chip s5p6440_gpios_4bit[] = { +#ifdef CONFIG_CPU_S5P6440 + { + .chip = { + .base = S5P6440_GPA(0), + .ngpio = S5P6440_GPIO_A_NR, + .label = "GPA", + }, + }, { + .chip = { + .base = S5P6440_GPB(0), + .ngpio = S5P6440_GPIO_B_NR, + .label = "GPB", + }, + }, { + .chip = { + .base = S5P6440_GPC(0), + .ngpio = S5P6440_GPIO_C_NR, + .label = "GPC", + }, + }, { + .base = S5P64X0_GPG_BASE, + .chip = { + .base = S5P6440_GPG(0), + .ngpio = S5P6440_GPIO_G_NR, + .label = "GPG", + }, + }, +#endif +}; + +static struct samsung_gpio_chip s5p6440_gpios_4bit2[] = { +#ifdef CONFIG_CPU_S5P6440 + { + .base = S5P64X0_GPH_BASE + 0x4, + .chip = { + .base = S5P6440_GPH(0), + .ngpio = S5P6440_GPIO_H_NR, + .label = "GPH", + }, + }, +#endif +}; + +static struct samsung_gpio_chip s5p6440_gpios_rbank[] = { +#ifdef CONFIG_CPU_S5P6440 + { + .base = S5P64X0_GPR_BASE + 0x4, + .config = &s5p64x0_gpio_cfg_rbank, + .chip = { + .base = S5P6440_GPR(0), + .ngpio = S5P6440_GPIO_R_NR, + .label = "GPR", + }, + }, +#endif +}; + +static struct samsung_gpio_chip s5p6440_gpios_2bit[] = { +#ifdef CONFIG_CPU_S5P6440 + { + .base = S5P64X0_GPF_BASE, + .config = &samsung_gpio_cfgs[6], + .chip = { + .base = S5P6440_GPF(0), + .ngpio = S5P6440_GPIO_F_NR, + .label = "GPF", + }, + }, { + .base = S5P64X0_GPI_BASE, + .config = &samsung_gpio_cfgs[4], + .chip = { + .base = S5P6440_GPI(0), + .ngpio = S5P6440_GPIO_I_NR, + .label = "GPI", + }, + }, { + .base = S5P64X0_GPJ_BASE, + .config = &samsung_gpio_cfgs[4], + .chip = { + .base = S5P6440_GPJ(0), + .ngpio = S5P6440_GPIO_J_NR, + .label = "GPJ", + }, + }, { + .base = S5P64X0_GPN_BASE, + .config = &samsung_gpio_cfgs[5], + .chip = { + .base = S5P6440_GPN(0), + .ngpio = S5P6440_GPIO_N_NR, + .label = "GPN", + }, + }, { + .base = S5P64X0_GPP_BASE, + .config = &samsung_gpio_cfgs[6], + .chip = { + .base = S5P6440_GPP(0), + .ngpio = S5P6440_GPIO_P_NR, + .label = "GPP", + }, + }, +#endif +}; + +/* + * S5P6450 GPIO bank summary: + * + * Bank GPIOs Style SlpCon ExtInt Group + * A 6 4Bit Yes 1 + * B 7 4Bit Yes 1 + * C 8 4Bit Yes 2 + * D 8 4Bit Yes None + * F 2 2Bit Yes None + * G 14 4Bit[2] Yes 5 + * H 10 4Bit[2] Yes 6 + * I 16 2Bit Yes None + * J 12 2Bit Yes None + * K 5 4Bit Yes None + * N 16 2Bit No IRQ_EINT + * P 11 2Bit Yes 8 + * Q 14 2Bit Yes None + * R 15 4Bit[2] Yes None + * S 8 2Bit Yes None + * + * [1] BANKF pins 14,15 do not form part of the external interrupt sources + * [2] BANK has two control registers, GPxCON0 and GPxCON1 + */ + +static struct samsung_gpio_chip s5p6450_gpios_4bit[] = { +#ifdef CONFIG_CPU_S5P6450 + { + .chip = { + .base = S5P6450_GPA(0), + .ngpio = S5P6450_GPIO_A_NR, + .label = "GPA", + }, + }, { + .chip = { + .base = S5P6450_GPB(0), + .ngpio = S5P6450_GPIO_B_NR, + .label = "GPB", + }, + }, { + .chip = { + .base = S5P6450_GPC(0), + .ngpio = S5P6450_GPIO_C_NR, + .label = "GPC", + }, + }, { + .chip = { + .base = S5P6450_GPD(0), + .ngpio = S5P6450_GPIO_D_NR, + .label = "GPD", + }, + }, { + .base = S5P6450_GPK_BASE, + .chip = { + .base = S5P6450_GPK(0), + .ngpio = S5P6450_GPIO_K_NR, + .label = "GPK", + }, + }, +#endif +}; + +static struct samsung_gpio_chip s5p6450_gpios_4bit2[] = { +#ifdef CONFIG_CPU_S5P6450 + { + .base = S5P64X0_GPG_BASE + 0x4, + .chip = { + .base = S5P6450_GPG(0), + .ngpio = S5P6450_GPIO_G_NR, + .label = "GPG", + }, + }, { + .base = S5P64X0_GPH_BASE + 0x4, + .chip = { + .base = S5P6450_GPH(0), + .ngpio = S5P6450_GPIO_H_NR, + .label = "GPH", + }, + }, +#endif +}; + +static struct samsung_gpio_chip s5p6450_gpios_rbank[] = { +#ifdef CONFIG_CPU_S5P6450 + { + .base = S5P64X0_GPR_BASE + 0x4, + .config = &s5p64x0_gpio_cfg_rbank, + .chip = { + .base = S5P6450_GPR(0), + .ngpio = S5P6450_GPIO_R_NR, + .label = "GPR", + }, + }, +#endif +}; + +static struct samsung_gpio_chip s5p6450_gpios_2bit[] = { +#ifdef CONFIG_CPU_S5P6450 + { + .base = S5P64X0_GPF_BASE, + .config = &samsung_gpio_cfgs[6], + .chip = { + .base = S5P6450_GPF(0), + .ngpio = S5P6450_GPIO_F_NR, + .label = "GPF", + }, + }, { + .base = S5P64X0_GPI_BASE, + .config = &samsung_gpio_cfgs[4], + .chip = { + .base = S5P6450_GPI(0), + .ngpio = S5P6450_GPIO_I_NR, + .label = "GPI", + }, + }, { + .base = S5P64X0_GPJ_BASE, + .config = &samsung_gpio_cfgs[4], + .chip = { + .base = S5P6450_GPJ(0), + .ngpio = S5P6450_GPIO_J_NR, + .label = "GPJ", + }, + }, { + .base = S5P64X0_GPN_BASE, + .config = &samsung_gpio_cfgs[5], + .chip = { + .base = S5P6450_GPN(0), + .ngpio = S5P6450_GPIO_N_NR, + .label = "GPN", + }, + }, { + .base = S5P64X0_GPP_BASE, + .config = &samsung_gpio_cfgs[6], + .chip = { + .base = S5P6450_GPP(0), + .ngpio = S5P6450_GPIO_P_NR, + .label = "GPP", + }, + }, { + .base = S5P6450_GPQ_BASE, + .config = &samsung_gpio_cfgs[5], + .chip = { + .base = S5P6450_GPQ(0), + .ngpio = S5P6450_GPIO_Q_NR, + .label = "GPQ", + }, + }, { + .base = S5P6450_GPS_BASE, + .config = &samsung_gpio_cfgs[6], + .chip = { + .base = S5P6450_GPS(0), + .ngpio = S5P6450_GPIO_S_NR, + .label = "GPS", + }, + }, +#endif +}; + +/* + * S5PC100 GPIO bank summary: + * + * Bank GPIOs Style INT Type + * A0 8 4Bit GPIO_INT0 + * A1 5 4Bit GPIO_INT1 + * B 8 4Bit GPIO_INT2 + * C 5 4Bit GPIO_INT3 + * D 7 4Bit GPIO_INT4 + * E0 8 4Bit GPIO_INT5 + * E1 6 4Bit GPIO_INT6 + * F0 8 4Bit GPIO_INT7 + * F1 8 4Bit GPIO_INT8 + * F2 8 4Bit GPIO_INT9 + * F3 4 4Bit GPIO_INT10 + * G0 8 4Bit GPIO_INT11 + * G1 3 4Bit GPIO_INT12 + * G2 7 4Bit GPIO_INT13 + * G3 7 4Bit GPIO_INT14 + * H0 8 4Bit WKUP_INT + * H1 8 4Bit WKUP_INT + * H2 8 4Bit WKUP_INT + * H3 8 4Bit WKUP_INT + * I 8 4Bit GPIO_INT15 + * J0 8 4Bit GPIO_INT16 + * J1 5 4Bit GPIO_INT17 + * J2 8 4Bit GPIO_INT18 + * J3 8 4Bit GPIO_INT19 + * J4 4 4Bit GPIO_INT20 + * K0 8 4Bit None + * K1 6 4Bit None + * K2 8 4Bit None + * K3 8 4Bit None + * L0 8 4Bit None + * L1 8 4Bit None + * L2 8 4Bit None + * L3 8 4Bit None + */ + +static struct samsung_gpio_chip s5pc100_gpios_4bit[] = { +#ifdef CONFIG_CPU_S5PC100 + { + .chip = { + .base = S5PC100_GPA0(0), + .ngpio = S5PC100_GPIO_A0_NR, + .label = "GPA0", + }, + }, { + .chip = { + .base = S5PC100_GPA1(0), + .ngpio = S5PC100_GPIO_A1_NR, + .label = "GPA1", + }, + }, { + .chip = { + .base = S5PC100_GPB(0), + .ngpio = S5PC100_GPIO_B_NR, + .label = "GPB", + }, + }, { + .chip = { + .base = S5PC100_GPC(0), + .ngpio = S5PC100_GPIO_C_NR, + .label = "GPC", + }, + }, { + .chip = { + .base = S5PC100_GPD(0), + .ngpio = S5PC100_GPIO_D_NR, + .label = "GPD", + }, + }, { + .chip = { + .base = S5PC100_GPE0(0), + .ngpio = S5PC100_GPIO_E0_NR, + .label = "GPE0", + }, + }, { + .chip = { + .base = S5PC100_GPE1(0), + .ngpio = S5PC100_GPIO_E1_NR, + .label = "GPE1", + }, + }, { + .chip = { + .base = S5PC100_GPF0(0), + .ngpio = S5PC100_GPIO_F0_NR, + .label = "GPF0", + }, + }, { + .chip = { + .base = S5PC100_GPF1(0), + .ngpio = S5PC100_GPIO_F1_NR, + .label = "GPF1", + }, + }, { + .chip = { + .base = S5PC100_GPF2(0), + .ngpio = S5PC100_GPIO_F2_NR, + .label = "GPF2", + }, + }, { + .chip = { + .base = S5PC100_GPF3(0), + .ngpio = S5PC100_GPIO_F3_NR, + .label = "GPF3", + }, + }, { + .chip = { + .base = S5PC100_GPG0(0), + .ngpio = S5PC100_GPIO_G0_NR, + .label = "GPG0", + }, + }, { + .chip = { + .base = S5PC100_GPG1(0), + .ngpio = S5PC100_GPIO_G1_NR, + .label = "GPG1", + }, + }, { + .chip = { + .base = S5PC100_GPG2(0), + .ngpio = S5PC100_GPIO_G2_NR, + .label = "GPG2", + }, + }, { + .chip = { + .base = S5PC100_GPG3(0), + .ngpio = S5PC100_GPIO_G3_NR, + .label = "GPG3", + }, + }, { + .chip = { + .base = S5PC100_GPI(0), + .ngpio = S5PC100_GPIO_I_NR, + .label = "GPI", + }, + }, { + .chip = { + .base = S5PC100_GPJ0(0), + .ngpio = S5PC100_GPIO_J0_NR, + .label = "GPJ0", + }, + }, { + .chip = { + .base = S5PC100_GPJ1(0), + .ngpio = S5PC100_GPIO_J1_NR, + .label = "GPJ1", + }, + }, { + .chip = { + .base = S5PC100_GPJ2(0), + .ngpio = S5PC100_GPIO_J2_NR, + .label = "GPJ2", + }, + }, { + .chip = { + .base = S5PC100_GPJ3(0), + .ngpio = S5PC100_GPIO_J3_NR, + .label = "GPJ3", + }, + }, { + .chip = { + .base = S5PC100_GPJ4(0), + .ngpio = S5PC100_GPIO_J4_NR, + .label = "GPJ4", + }, + }, { + .chip = { + .base = S5PC100_GPK0(0), + .ngpio = S5PC100_GPIO_K0_NR, + .label = "GPK0", + }, + }, { + .chip = { + .base = S5PC100_GPK1(0), + .ngpio = S5PC100_GPIO_K1_NR, + .label = "GPK1", + }, + }, { + .chip = { + .base = S5PC100_GPK2(0), + .ngpio = S5PC100_GPIO_K2_NR, + .label = "GPK2", + }, + }, { + .chip = { + .base = S5PC100_GPK3(0), + .ngpio = S5PC100_GPIO_K3_NR, + .label = "GPK3", + }, + }, { + .chip = { + .base = S5PC100_GPL0(0), + .ngpio = S5PC100_GPIO_L0_NR, + .label = "GPL0", + }, + }, { + .chip = { + .base = S5PC100_GPL1(0), + .ngpio = S5PC100_GPIO_L1_NR, + .label = "GPL1", + }, + }, { + .chip = { + .base = S5PC100_GPL2(0), + .ngpio = S5PC100_GPIO_L2_NR, + .label = "GPL2", + }, + }, { + .chip = { + .base = S5PC100_GPL3(0), + .ngpio = S5PC100_GPIO_L3_NR, + .label = "GPL3", + }, + }, { + .chip = { + .base = S5PC100_GPL4(0), + .ngpio = S5PC100_GPIO_L4_NR, + .label = "GPL4", + }, + }, { + .base = (S5P_VA_GPIO + 0xC00), + .irq_base = IRQ_EINT(0), + .chip = { + .base = S5PC100_GPH0(0), + .ngpio = S5PC100_GPIO_H0_NR, + .label = "GPH0", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO + 0xC20), + .irq_base = IRQ_EINT(8), + .chip = { + .base = S5PC100_GPH1(0), + .ngpio = S5PC100_GPIO_H1_NR, + .label = "GPH1", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO + 0xC40), + .irq_base = IRQ_EINT(16), + .chip = { + .base = S5PC100_GPH2(0), + .ngpio = S5PC100_GPIO_H2_NR, + .label = "GPH2", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO + 0xC60), + .irq_base = IRQ_EINT(24), + .chip = { + .base = S5PC100_GPH3(0), + .ngpio = S5PC100_GPIO_H3_NR, + .label = "GPH3", + .to_irq = samsung_gpiolib_to_irq, + }, + }, +#endif +}; + +/* + * Followings are the gpio banks in S5PV210/S5PC110 + * + * The 'config' member when left to NULL, is initialized to the default + * structure samsung_gpio_cfgs[4] in the init function below. + * + * The 'base' member is also initialized in the init function below. + * Note: The initialization of 'base' member of samsung_gpio_chip structure + * uses the above macro and depends on the banks being listed in order here. + */ + +static struct samsung_gpio_chip s5pv210_gpios_4bit[] = { +#ifdef CONFIG_CPU_S5PV210 + { + .chip = { + .base = S5PV210_GPA0(0), + .ngpio = S5PV210_GPIO_A0_NR, + .label = "GPA0", + }, + }, { + .chip = { + .base = S5PV210_GPA1(0), + .ngpio = S5PV210_GPIO_A1_NR, + .label = "GPA1", + }, + }, { + .chip = { + .base = S5PV210_GPB(0), + .ngpio = S5PV210_GPIO_B_NR, + .label = "GPB", + }, + }, { + .chip = { + .base = S5PV210_GPC0(0), + .ngpio = S5PV210_GPIO_C0_NR, + .label = "GPC0", + }, + }, { + .chip = { + .base = S5PV210_GPC1(0), + .ngpio = S5PV210_GPIO_C1_NR, + .label = "GPC1", + }, + }, { + .chip = { + .base = S5PV210_GPD0(0), + .ngpio = S5PV210_GPIO_D0_NR, + .label = "GPD0", + }, + }, { + .chip = { + .base = S5PV210_GPD1(0), + .ngpio = S5PV210_GPIO_D1_NR, + .label = "GPD1", + }, + }, { + .chip = { + .base = S5PV210_GPE0(0), + .ngpio = S5PV210_GPIO_E0_NR, + .label = "GPE0", + }, + }, { + .chip = { + .base = S5PV210_GPE1(0), + .ngpio = S5PV210_GPIO_E1_NR, + .label = "GPE1", + }, + }, { + .chip = { + .base = S5PV210_GPF0(0), + .ngpio = S5PV210_GPIO_F0_NR, + .label = "GPF0", + }, + }, { + .chip = { + .base = S5PV210_GPF1(0), + .ngpio = S5PV210_GPIO_F1_NR, + .label = "GPF1", + }, + }, { + .chip = { + .base = S5PV210_GPF2(0), + .ngpio = S5PV210_GPIO_F2_NR, + .label = "GPF2", + }, + }, { + .chip = { + .base = S5PV210_GPF3(0), + .ngpio = S5PV210_GPIO_F3_NR, + .label = "GPF3", + }, + }, { + .chip = { + .base = S5PV210_GPG0(0), + .ngpio = S5PV210_GPIO_G0_NR, + .label = "GPG0", + }, + }, { + .chip = { + .base = S5PV210_GPG1(0), + .ngpio = S5PV210_GPIO_G1_NR, + .label = "GPG1", + }, + }, { + .chip = { + .base = S5PV210_GPG2(0), + .ngpio = S5PV210_GPIO_G2_NR, + .label = "GPG2", + }, + }, { + .chip = { + .base = S5PV210_GPG3(0), + .ngpio = S5PV210_GPIO_G3_NR, + .label = "GPG3", + }, + }, { + .chip = { + .base = S5PV210_GPI(0), + .ngpio = S5PV210_GPIO_I_NR, + .label = "GPI", + }, + }, { + .chip = { + .base = S5PV210_GPJ0(0), + .ngpio = S5PV210_GPIO_J0_NR, + .label = "GPJ0", + }, + }, { + .chip = { + .base = S5PV210_GPJ1(0), + .ngpio = S5PV210_GPIO_J1_NR, + .label = "GPJ1", + }, + }, { + .chip = { + .base = S5PV210_GPJ2(0), + .ngpio = S5PV210_GPIO_J2_NR, + .label = "GPJ2", + }, + }, { + .chip = { + .base = S5PV210_GPJ3(0), + .ngpio = S5PV210_GPIO_J3_NR, + .label = "GPJ3", + }, + }, { + .chip = { + .base = S5PV210_GPJ4(0), + .ngpio = S5PV210_GPIO_J4_NR, + .label = "GPJ4", + }, + }, { + .chip = { + .base = S5PV210_MP01(0), + .ngpio = S5PV210_GPIO_MP01_NR, + .label = "MP01", + }, + }, { + .chip = { + .base = S5PV210_MP02(0), + .ngpio = S5PV210_GPIO_MP02_NR, + .label = "MP02", + }, + }, { + .chip = { + .base = S5PV210_MP03(0), + .ngpio = S5PV210_GPIO_MP03_NR, + .label = "MP03", + }, + }, { + .chip = { + .base = S5PV210_MP04(0), + .ngpio = S5PV210_GPIO_MP04_NR, + .label = "MP04", + }, + }, { + .chip = { + .base = S5PV210_MP05(0), + .ngpio = S5PV210_GPIO_MP05_NR, + .label = "MP05", + }, + }, { + .base = (S5P_VA_GPIO + 0xC00), + .irq_base = IRQ_EINT(0), + .chip = { + .base = S5PV210_GPH0(0), + .ngpio = S5PV210_GPIO_H0_NR, + .label = "GPH0", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO + 0xC20), + .irq_base = IRQ_EINT(8), + .chip = { + .base = S5PV210_GPH1(0), + .ngpio = S5PV210_GPIO_H1_NR, + .label = "GPH1", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO + 0xC40), + .irq_base = IRQ_EINT(16), + .chip = { + .base = S5PV210_GPH2(0), + .ngpio = S5PV210_GPIO_H2_NR, + .label = "GPH2", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO + 0xC60), + .irq_base = IRQ_EINT(24), + .chip = { + .base = S5PV210_GPH3(0), + .ngpio = S5PV210_GPIO_H3_NR, + .label = "GPH3", + .to_irq = samsung_gpiolib_to_irq, + }, + }, +#endif +}; + +/* + * Followings are the gpio banks in EXYNOS4210 + * + * The 'config' member when left to NULL, is initialized to the default + * structure samsung_gpio_cfgs[4] in the init function below. + * + * The 'base' member is also initialized in the init function below. + * Note: The initialization of 'base' member of samsung_gpio_chip structure + * uses the above macro and depends on the banks being listed in order here. + */ + +static struct samsung_gpio_chip exynos4_gpios_1[] = { +#ifdef CONFIG_ARCH_EXYNOS4 + { + .chip = { + .base = EXYNOS4_GPA0(0), + .ngpio = EXYNOS4_GPIO_A0_NR, + .label = "GPA0", + }, + }, { + .chip = { + .base = EXYNOS4_GPA1(0), + .ngpio = EXYNOS4_GPIO_A1_NR, + .label = "GPA1", + }, + }, { + .chip = { + .base = EXYNOS4_GPB(0), + .ngpio = EXYNOS4_GPIO_B_NR, + .label = "GPB", + }, + }, { + .chip = { + .base = EXYNOS4_GPC0(0), + .ngpio = EXYNOS4_GPIO_C0_NR, + .label = "GPC0", + }, + }, { + .chip = { + .base = EXYNOS4_GPC1(0), + .ngpio = EXYNOS4_GPIO_C1_NR, + .label = "GPC1", + }, + }, { + .chip = { + .base = EXYNOS4_GPD0(0), + .ngpio = EXYNOS4_GPIO_D0_NR, + .label = "GPD0", + }, + }, { + .chip = { + .base = EXYNOS4_GPD1(0), + .ngpio = EXYNOS4_GPIO_D1_NR, + .label = "GPD1", + }, + }, { + .chip = { + .base = EXYNOS4_GPE0(0), + .ngpio = EXYNOS4_GPIO_E0_NR, + .label = "GPE0", + }, + }, { + .chip = { + .base = EXYNOS4_GPE1(0), + .ngpio = EXYNOS4_GPIO_E1_NR, + .label = "GPE1", + }, + }, { + .chip = { + .base = EXYNOS4_GPE2(0), + .ngpio = EXYNOS4_GPIO_E2_NR, + .label = "GPE2", + }, + }, { + .chip = { + .base = EXYNOS4_GPE3(0), + .ngpio = EXYNOS4_GPIO_E3_NR, + .label = "GPE3", + }, + }, { + .chip = { + .base = EXYNOS4_GPE4(0), + .ngpio = EXYNOS4_GPIO_E4_NR, + .label = "GPE4", + }, + }, { + .chip = { + .base = EXYNOS4_GPF0(0), + .ngpio = EXYNOS4_GPIO_F0_NR, + .label = "GPF0", + }, + }, { + .chip = { + .base = EXYNOS4_GPF1(0), + .ngpio = EXYNOS4_GPIO_F1_NR, + .label = "GPF1", + }, + }, { + .chip = { + .base = EXYNOS4_GPF2(0), + .ngpio = EXYNOS4_GPIO_F2_NR, + .label = "GPF2", + }, + }, { + .chip = { + .base = EXYNOS4_GPF3(0), + .ngpio = EXYNOS4_GPIO_F3_NR, + .label = "GPF3", + }, + }, +#endif +}; + +static struct samsung_gpio_chip exynos4_gpios_2[] = { +#ifdef CONFIG_ARCH_EXYNOS4 + { + .chip = { + .base = EXYNOS4_GPJ0(0), + .ngpio = EXYNOS4_GPIO_J0_NR, + .label = "GPJ0", + }, + }, { + .chip = { + .base = EXYNOS4_GPJ1(0), + .ngpio = EXYNOS4_GPIO_J1_NR, + .label = "GPJ1", + }, + }, { + .chip = { + .base = EXYNOS4_GPK0(0), + .ngpio = EXYNOS4_GPIO_K0_NR, + .label = "GPK0", + }, + }, { + .chip = { + .base = EXYNOS4_GPK1(0), + .ngpio = EXYNOS4_GPIO_K1_NR, + .label = "GPK1", + }, + }, { + .chip = { + .base = EXYNOS4_GPK2(0), + .ngpio = EXYNOS4_GPIO_K2_NR, + .label = "GPK2", + }, + }, { + .chip = { + .base = EXYNOS4_GPK3(0), + .ngpio = EXYNOS4_GPIO_K3_NR, + .label = "GPK3", + }, + }, { + .chip = { + .base = EXYNOS4_GPL0(0), + .ngpio = EXYNOS4_GPIO_L0_NR, + .label = "GPL0", + }, + }, { + .chip = { + .base = EXYNOS4_GPL1(0), + .ngpio = EXYNOS4_GPIO_L1_NR, + .label = "GPL1", + }, + }, { + .chip = { + .base = EXYNOS4_GPL2(0), + .ngpio = EXYNOS4_GPIO_L2_NR, + .label = "GPL2", + }, + }, { + .config = &samsung_gpio_cfgs[4], + .chip = { + .base = EXYNOS4_GPY0(0), + .ngpio = EXYNOS4_GPIO_Y0_NR, + .label = "GPY0", + }, + }, { + .config = &samsung_gpio_cfgs[4], + .chip = { + .base = EXYNOS4_GPY1(0), + .ngpio = EXYNOS4_GPIO_Y1_NR, + .label = "GPY1", + }, + }, { + .config = &samsung_gpio_cfgs[4], + .chip = { + .base = EXYNOS4_GPY2(0), + .ngpio = EXYNOS4_GPIO_Y2_NR, + .label = "GPY2", + }, + }, { + .config = &samsung_gpio_cfgs[4], + .chip = { + .base = EXYNOS4_GPY3(0), + .ngpio = EXYNOS4_GPIO_Y3_NR, + .label = "GPY3", + }, + }, { + .config = &samsung_gpio_cfgs[4], + .chip = { + .base = EXYNOS4_GPY4(0), + .ngpio = EXYNOS4_GPIO_Y4_NR, + .label = "GPY4", + }, + }, { + .config = &samsung_gpio_cfgs[4], + .chip = { + .base = EXYNOS4_GPY5(0), + .ngpio = EXYNOS4_GPIO_Y5_NR, + .label = "GPY5", + }, + }, { + .config = &samsung_gpio_cfgs[4], + .chip = { + .base = EXYNOS4_GPY6(0), + .ngpio = EXYNOS4_GPIO_Y6_NR, + .label = "GPY6", + }, + }, { + .base = (S5P_VA_GPIO2 + 0xC00), + .config = &samsung_gpio_cfgs[4], + .irq_base = IRQ_EINT(0), + .chip = { + .base = EXYNOS4_GPX0(0), + .ngpio = EXYNOS4_GPIO_X0_NR, + .label = "GPX0", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO2 + 0xC20), + .config = &samsung_gpio_cfgs[4], + .irq_base = IRQ_EINT(8), + .chip = { + .base = EXYNOS4_GPX1(0), + .ngpio = EXYNOS4_GPIO_X1_NR, + .label = "GPX1", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO2 + 0xC40), + .config = &samsung_gpio_cfgs[4], + .irq_base = IRQ_EINT(16), + .chip = { + .base = EXYNOS4_GPX2(0), + .ngpio = EXYNOS4_GPIO_X2_NR, + .label = "GPX2", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO2 + 0xC60), + .config = &samsung_gpio_cfgs[4], + .irq_base = IRQ_EINT(24), + .chip = { + .base = EXYNOS4_GPX3(0), + .ngpio = EXYNOS4_GPIO_X3_NR, + .label = "GPX3", + .to_irq = samsung_gpiolib_to_irq, + }, + }, +#endif +}; + +static struct samsung_gpio_chip exynos4_gpios_3[] = { +#ifdef CONFIG_ARCH_EXYNOS4 + { + .chip = { + .base = EXYNOS4_GPZ(0), + .ngpio = EXYNOS4_GPIO_Z_NR, + .label = "GPZ", + }, + }, +#endif +}; + +/* TODO: cleanup soc_is_* */ +static __init int samsung_gpiolib_init(void) +{ + struct samsung_gpio_chip *chip; + int i, nr_chips; + int group = 0; + + samsung_gpiolib_set_cfg(samsung_gpio_cfgs, ARRAY_SIZE(samsung_gpio_cfgs)); + + if (soc_is_s3c24xx()) { + s3c24xx_gpiolib_add_chips(s3c24xx_gpios, + ARRAY_SIZE(s3c24xx_gpios), S3C24XX_VA_GPIO); + } else if (soc_is_s3c64xx()) { + samsung_gpiolib_add_2bit_chips(s3c64xx_gpios_2bit, + ARRAY_SIZE(s3c64xx_gpios_2bit), + S3C64XX_VA_GPIO + 0xE0, 0x20); + samsung_gpiolib_add_4bit_chips(s3c64xx_gpios_4bit, + ARRAY_SIZE(s3c64xx_gpios_4bit), + S3C64XX_VA_GPIO); + samsung_gpiolib_add_4bit2_chips(s3c64xx_gpios_4bit2, + ARRAY_SIZE(s3c64xx_gpios_4bit2)); + } else if (soc_is_s5p6440()) { + samsung_gpiolib_add_2bit_chips(s5p6440_gpios_2bit, + ARRAY_SIZE(s5p6440_gpios_2bit), NULL, 0x0); + samsung_gpiolib_add_4bit_chips(s5p6440_gpios_4bit, + ARRAY_SIZE(s5p6440_gpios_4bit), S5P_VA_GPIO); + samsung_gpiolib_add_4bit2_chips(s5p6440_gpios_4bit2, + ARRAY_SIZE(s5p6440_gpios_4bit2)); + s5p64x0_gpiolib_add_rbank(s5p6440_gpios_rbank, + ARRAY_SIZE(s5p6440_gpios_rbank)); + } else if (soc_is_s5p6450()) { + samsung_gpiolib_add_2bit_chips(s5p6450_gpios_2bit, + ARRAY_SIZE(s5p6450_gpios_2bit), NULL, 0x0); + samsung_gpiolib_add_4bit_chips(s5p6450_gpios_4bit, + ARRAY_SIZE(s5p6450_gpios_4bit), S5P_VA_GPIO); + samsung_gpiolib_add_4bit2_chips(s5p6450_gpios_4bit2, + ARRAY_SIZE(s5p6450_gpios_4bit2)); + s5p64x0_gpiolib_add_rbank(s5p6450_gpios_rbank, + ARRAY_SIZE(s5p6450_gpios_rbank)); + } else if (soc_is_s5pc100()) { + group = 0; + chip = s5pc100_gpios_4bit; + nr_chips = ARRAY_SIZE(s5pc100_gpios_4bit); + + for (i = 0; i < nr_chips; i++, chip++) { + if (!chip->config) { + chip->config = &samsung_gpio_cfgs[4]; + chip->group = group++; + } + } + samsung_gpiolib_add_4bit_chips(s5pc100_gpios_4bit, nr_chips, S5P_VA_GPIO); +#if defined(CONFIG_CPU_S5PC100) && defined(CONFIG_S5P_GPIO_INT) + s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR); +#endif + } else if (soc_is_s5pv210()) { + group = 0; + chip = s5pv210_gpios_4bit; + nr_chips = ARRAY_SIZE(s5pv210_gpios_4bit); + + for (i = 0; i < nr_chips; i++, chip++) { + if (!chip->config) { + chip->config = &samsung_gpio_cfgs[4]; + chip->group = group++; + } + } + samsung_gpiolib_add_4bit_chips(s5pv210_gpios_4bit, nr_chips, S5P_VA_GPIO); +#if defined(CONFIG_CPU_S5PV210) && defined(CONFIG_S5P_GPIO_INT) + s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR); +#endif + } else if (soc_is_exynos4210()) { + group = 0; + + /* gpio part1 */ + chip = exynos4_gpios_1; + nr_chips = ARRAY_SIZE(exynos4_gpios_1); + + for (i = 0; i < nr_chips; i++, chip++) { + if (!chip->config) { + chip->config = &exynos4_gpio_cfg; + chip->group = group++; + } + } + samsung_gpiolib_add_4bit_chips(exynos4_gpios_1, nr_chips, S5P_VA_GPIO1); + + /* gpio part2 */ + chip = exynos4_gpios_2; + nr_chips = ARRAY_SIZE(exynos4_gpios_2); + + for (i = 0; i < nr_chips; i++, chip++) { + if (!chip->config) { + chip->config = &exynos4_gpio_cfg; + chip->group = group++; + } + } + samsung_gpiolib_add_4bit_chips(exynos4_gpios_2, nr_chips, S5P_VA_GPIO2); + + /* gpio part3 */ + chip = exynos4_gpios_3; + nr_chips = ARRAY_SIZE(exynos4_gpios_3); + + for (i = 0; i < nr_chips; i++, chip++) { + if (!chip->config) { + chip->config = &exynos4_gpio_cfg; + chip->group = group++; + } + } + samsung_gpiolib_add_4bit_chips(exynos4_gpios_3, nr_chips, S5P_VA_GPIO3); + +#if defined(CONFIG_SOC_EXYNOS4210) && defined(CONFIG_S5P_GPIO_INT) + s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS); + s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS); +#endif + } + + return 0; +} +core_initcall(samsung_gpiolib_init); + +int s3c_gpio_cfgpin(unsigned int pin, unsigned int config) +{ + struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); + unsigned long flags; + int offset; + int ret; + + if (!chip) + return -EINVAL; + + offset = pin - chip->chip.base; + + samsung_gpio_lock(chip, flags); + ret = samsung_gpio_do_setcfg(chip, offset, config); + samsung_gpio_unlock(chip, flags); + + return ret; +} +EXPORT_SYMBOL(s3c_gpio_cfgpin); + +int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr, + unsigned int cfg) +{ + int ret; + + for (; nr > 0; nr--, start++) { + ret = s3c_gpio_cfgpin(start, cfg); + if (ret != 0) + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(s3c_gpio_cfgpin_range); + +int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr, + unsigned int cfg, samsung_gpio_pull_t pull) +{ + int ret; + + for (; nr > 0; nr--, start++) { + s3c_gpio_setpull(start, pull); + ret = s3c_gpio_cfgpin(start, cfg); + if (ret != 0) + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range); + +unsigned s3c_gpio_getcfg(unsigned int pin) +{ + struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); + unsigned long flags; + unsigned ret = 0; + int offset; + + if (chip) { + offset = pin - chip->chip.base; + + samsung_gpio_lock(chip, flags); + ret = samsung_gpio_do_getcfg(chip, offset); + samsung_gpio_unlock(chip, flags); + } + + return ret; +} +EXPORT_SYMBOL(s3c_gpio_getcfg); + +int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull) +{ + struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); + unsigned long flags; + int offset, ret; + + if (!chip) + return -EINVAL; + + offset = pin - chip->chip.base; + + samsung_gpio_lock(chip, flags); + ret = samsung_gpio_do_setpull(chip, offset, pull); + samsung_gpio_unlock(chip, flags); + + return ret; +} +EXPORT_SYMBOL(s3c_gpio_setpull); + +samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin) +{ + struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); + unsigned long flags; + int offset; + u32 pup = 0; + + if (chip) { + offset = pin - chip->chip.base; + + samsung_gpio_lock(chip, flags); + pup = samsung_gpio_do_getpull(chip, offset); + samsung_gpio_unlock(chip, flags); + } + + return (__force samsung_gpio_pull_t)pup; +} +EXPORT_SYMBOL(s3c_gpio_getpull); + +/* gpiolib wrappers until these are totally eliminated */ + +void s3c2410_gpio_pullup(unsigned int pin, unsigned int to) +{ + int ret; + + WARN_ON(to); /* should be none of these left */ + + if (!to) { + /* if pull is enabled, try first with up, and if that + * fails, try using down */ + + ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP); + if (ret) + s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN); + } else { + s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE); + } +} +EXPORT_SYMBOL(s3c2410_gpio_pullup); + +void s3c2410_gpio_setpin(unsigned int pin, unsigned int to) +{ + /* do this via gpiolib until all users removed */ + + gpio_request(pin, "temporary"); + gpio_set_value(pin, to); + gpio_free(pin); +} +EXPORT_SYMBOL(s3c2410_gpio_setpin); + +unsigned int s3c2410_gpio_getpin(unsigned int pin) +{ + struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); + unsigned long offs = pin - chip->chip.base; + + return __raw_readl(chip->base + 0x04) & (1 << offs); +} +EXPORT_SYMBOL(s3c2410_gpio_getpin); + +#ifdef CONFIG_S5P_GPIO_DRVSTR +s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin) +{ + struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); + unsigned int off; + void __iomem *reg; + int shift; + u32 drvstr; + + if (!chip) + return -EINVAL; + + off = pin - chip->chip.base; + shift = off * 2; + reg = chip->base + 0x0C; + + drvstr = __raw_readl(reg); + drvstr = drvstr >> shift; + drvstr &= 0x3; + + return (__force s5p_gpio_drvstr_t)drvstr; +} +EXPORT_SYMBOL(s5p_gpio_get_drvstr); + +int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr) +{ + struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); + unsigned int off; + void __iomem *reg; + int shift; + u32 tmp; + + if (!chip) + return -EINVAL; + + off = pin - chip->chip.base; + shift = off * 2; + reg = chip->base + 0x0C; + + tmp = __raw_readl(reg); + tmp &= ~(0x3 << shift); + tmp |= drvstr << shift; + + __raw_writel(tmp, reg); + + return 0; +} +EXPORT_SYMBOL(s5p_gpio_set_drvstr); +#endif /* CONFIG_S5P_GPIO_DRVSTR */ + +#ifdef CONFIG_PLAT_S3C24XX +unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change) +{ + unsigned long flags; + unsigned long misccr; + + local_irq_save(flags); + misccr = __raw_readl(S3C24XX_MISCCR); + misccr &= ~clear; + misccr ^= change; + __raw_writel(misccr, S3C24XX_MISCCR); + local_irq_restore(flags); + + return misccr; +} +EXPORT_SYMBOL(s3c2410_modify_misccr); +#endif -- cgit v1.2.3-18-g5258 From 782d8a3c0bdf23ec24fc8facb5af8510b2cf6de1 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Tue, 30 Aug 2011 20:47:32 +0900 Subject: ARM: SAMSUNG: Update the name of regarding Samsung GPIO According to gpio-samsung.c, this patch updates the name of regarding Samsung GPIO. Basically the samsung_xxx prefix is used in gpio-samsung.c instead of s3c_xxx, because unified name can reduce its complexity. Note: some s3c_xxx stil remains because it is used widely. It will be updated next time. Cc: Ben Dooks Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos4/include/mach/pm-core.h | 2 +- arch/arm/mach-s3c2410/include/mach/gpio-fns.h | 99 +----------- arch/arm/mach-s3c2410/include/mach/gpio-track.h | 6 +- arch/arm/mach-s3c2410/include/mach/pm-core.h | 2 +- arch/arm/mach-s3c2410/s3c2410.c | 4 +- arch/arm/mach-s3c2412/gpio.c | 2 +- arch/arm/mach-s3c2416/s3c2416.c | 4 +- arch/arm/mach-s3c2440/s3c2440.c | 4 +- arch/arm/mach-s3c2440/s3c2442.c | 4 +- arch/arm/mach-s3c2443/s3c2443.c | 4 +- arch/arm/mach-s3c64xx/include/mach/pm-core.h | 2 +- arch/arm/mach-s5pv210/include/mach/pm-core.h | 2 +- arch/arm/plat-s5p/irq-gpioint.c | 10 +- .../plat-samsung/include/plat/gpio-cfg-helpers.h | 172 +++++---------------- arch/arm/plat-samsung/include/plat/gpio-cfg.h | 34 ++-- arch/arm/plat-samsung/include/plat/gpio-core.h | 97 +++--------- arch/arm/plat-samsung/include/plat/gpio-fns.h | 98 ++++++++++++ arch/arm/plat-samsung/include/plat/pm.h | 10 +- arch/arm/plat-samsung/pm-gpio.c | 72 ++++----- arch/arm/plat-samsung/pm.c | 6 +- 20 files changed, 250 insertions(+), 384 deletions(-) create mode 100644 arch/arm/plat-samsung/include/plat/gpio-fns.h diff --git a/arch/arm/mach-exynos4/include/mach/pm-core.h b/arch/arm/mach-exynos4/include/mach/pm-core.h index 1df3b81f96e..3499ec73720 100644 --- a/arch/arm/mach-exynos4/include/mach/pm-core.h +++ b/arch/arm/mach-exynos4/include/mach/pm-core.h @@ -53,7 +53,7 @@ static inline void s3c_pm_restored_gpios(void) /* nothing here yet */ } -static inline void s3c_pm_saved_gpios(void) +static inline void samsung_pm_saved_gpios(void) { /* nothing here yet */ } diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h index bab13920176..c53ad34c657 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h @@ -1,98 +1 @@ -/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h - * - * Copyright (c) 2003-2009 Simtec Electronics - * Ben Dooks - * - * S3C2410 - hardware - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __MACH_GPIO_FNS_H -#define __MACH_GPIO_FNS_H __FILE__ - -/* These functions are in the to-be-removed category and it is strongly - * encouraged not to use these in new code. They will be marked deprecated - * very soon. - * - * Most of the functionality can be either replaced by the gpiocfg calls - * for the s3c platform or by the generic GPIOlib API. - * - * As of 2.6.35-rc, these will be removed, with the few drivers using them - * either replaced or given a wrapper until the calls can be removed. -*/ - -#include - -static inline void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int cfg) -{ - /* 1:1 mapping between cfgpin and setcfg calls at the moment */ - s3c_gpio_cfgpin(pin, cfg); -} - -/* external functions for GPIO support - * - * These allow various different clients to access the same GPIO - * registers without conflicting. If your driver only owns the entire - * GPIO register, then it is safe to ioremap/__raw_{read|write} to it. -*/ - -extern unsigned int s3c2410_gpio_getcfg(unsigned int pin); - -/* s3c2410_gpio_getirq - * - * turn the given pin number into the corresponding IRQ number - * - * returns: - * < 0 = no interrupt for this pin - * >=0 = interrupt number for the pin -*/ - -extern int s3c2410_gpio_getirq(unsigned int pin); - -/* s3c2410_gpio_irqfilter - * - * set the irq filtering on the given pin - * - * on = 0 => disable filtering - * 1 => enable filtering - * - * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with - * width of filter (0 through 63) - * - * -*/ - -extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, - unsigned int config); - -/* s3c2410_gpio_pullup - * - * This call should be replaced with s3c_gpio_setpull(). - * - * As a note, there is currently no distinction between pull-up and pull-down - * in the s3c24xx series devices with only an on/off configuration. - */ - -/* s3c2410_gpio_pullup - * - * configure the pull-up control on the given pin - * - * to = 1 => disable the pull-up - * 0 => enable the pull-up - * - * eg; - * - * s3c2410_gpio_pullup(S3C2410_GPB(0), 0); - * s3c2410_gpio_pullup(S3C2410_GPE(8), 0); -*/ - -extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to); - -extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to); - -extern unsigned int s3c2410_gpio_getpin(unsigned int pin); - -#endif /* __MACH_GPIO_FNS_H */ +#include diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-track.h b/arch/arm/mach-s3c2410/include/mach/gpio-track.h index d67819dde42..c410a078622 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-track.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio-track.h @@ -17,11 +17,11 @@ #include -extern struct s3c_gpio_chip s3c24xx_gpios[]; +extern struct samsung_gpio_chip s3c24xx_gpios[]; -static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin) +static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int pin) { - struct s3c_gpio_chip *chip; + struct samsung_gpio_chip *chip; if (pin > S3C_GPIO_END) return NULL; diff --git a/arch/arm/mach-s3c2410/include/mach/pm-core.h b/arch/arm/mach-s3c2410/include/mach/pm-core.h index 45eea5210c8..2eef7e6f767 100644 --- a/arch/arm/mach-s3c2410/include/mach/pm-core.h +++ b/arch/arm/mach-s3c2410/include/mach/pm-core.h @@ -64,4 +64,4 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs, } static inline void s3c_pm_restored_gpios(void) { } -static inline void s3c_pm_saved_gpios(void) { } +static inline void samsung_pm_saved_gpios(void) { } diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c index f1d3bd8f6f1..a99c2f4a523 100644 --- a/arch/arm/mach-s3c2410/s3c2410.c +++ b/arch/arm/mach-s3c2410/s3c2410.c @@ -72,8 +72,8 @@ void __init s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no) void __init s3c2410_map_io(void) { - s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up; - s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up; + s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up; + s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up; iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc)); } diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c index 3404a876b33..4526f6ba31a 100644 --- a/arch/arm/mach-s3c2412/gpio.c +++ b/arch/arm/mach-s3c2412/gpio.c @@ -28,7 +28,7 @@ int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state) { - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); + struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); unsigned long offs = pin - chip->chip.base; unsigned long flags; unsigned long slpcon; diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c index 494ce913dc9..3156b7a7137 100644 --- a/arch/arm/mach-s3c2416/s3c2416.c +++ b/arch/arm/mach-s3c2416/s3c2416.c @@ -118,8 +118,8 @@ void __init s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no) void __init s3c2416_map_io(void) { - s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_updown; - s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_updown; + s3c24xx_gpiocfg_default.set_pull = samsung_gpio_setpull_updown; + s3c24xx_gpiocfg_default.get_pull = samsung_gpio_getpull_updown; /* initialize device information early */ s3c2416_default_sdhci0(); diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c index ce99ff72838..fc84e481efc 100644 --- a/arch/arm/mach-s3c2440/s3c2440.c +++ b/arch/arm/mach-s3c2440/s3c2440.c @@ -68,6 +68,6 @@ void __init s3c2440_map_io(void) { s3c244x_map_io(); - s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up; - s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up; + s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up; + s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up; } diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c index 9ad99f8016a..48e273ce9f9 100644 --- a/arch/arm/mach-s3c2440/s3c2442.c +++ b/arch/arm/mach-s3c2440/s3c2442.c @@ -180,6 +180,6 @@ void __init s3c2442_map_io(void) { s3c244x_map_io(); - s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1down; - s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1down; + s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1down; + s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1down; } diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c index e6a28ba52c7..5df6458ddd4 100644 --- a/arch/arm/mach-s3c2443/s3c2443.c +++ b/arch/arm/mach-s3c2443/s3c2443.c @@ -90,8 +90,8 @@ void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no) void __init s3c2443_map_io(void) { - s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_s3c2443; - s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_s3c2443; + s3c24xx_gpiocfg_default.set_pull = s3c2443_gpio_setpull; + s3c24xx_gpiocfg_default.get_pull = s3c2443_gpio_getpull; iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc)); } diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h index 38659bebe4b..fcf3dcabb69 100644 --- a/arch/arm/mach-s3c64xx/include/mach/pm-core.h +++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h @@ -104,7 +104,7 @@ static inline void s3c_pm_restored_gpios(void) __raw_writel(0, S3C64XX_SLPEN); } -static inline void s3c_pm_saved_gpios(void) +static inline void samsung_pm_saved_gpios(void) { /* turn on the sleep mode and keep it there, as it seems that during * suspend the xCON registers get re-set and thus you can end up with diff --git a/arch/arm/mach-s5pv210/include/mach/pm-core.h b/arch/arm/mach-s5pv210/include/mach/pm-core.h index 3e22109e1b7..eba8aea63ed 100644 --- a/arch/arm/mach-s5pv210/include/mach/pm-core.h +++ b/arch/arm/mach-s5pv210/include/mach/pm-core.h @@ -43,4 +43,4 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs, } static inline void s3c_pm_restored_gpios(void) { } -static inline void s3c_pm_saved_gpios(void) { } +static inline void samsung_pm_saved_gpios(void) { } diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c index f71078ef6bb..0455519aecd 100644 --- a/arch/arm/plat-s5p/irq-gpioint.c +++ b/arch/arm/plat-s5p/irq-gpioint.c @@ -37,7 +37,7 @@ struct s5p_gpioint_bank { int start; int nr_groups; int irq; - struct s3c_gpio_chip **chips; + struct samsung_gpio_chip **chips; void (*handler)(unsigned int, struct irq_desc *); }; @@ -87,7 +87,7 @@ static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc) chained_irq_enter(chip, desc); for (group = 0; group < bank->nr_groups; group++) { - struct s3c_gpio_chip *chip = bank->chips[group]; + struct samsung_gpio_chip *chip = bank->chips[group]; if (!chip) continue; @@ -110,7 +110,7 @@ static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc) chained_irq_exit(chip, desc); } -static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) +static __init int s5p_gpioint_add(struct samsung_gpio_chip *chip) { static int used_gpioint_groups = 0; int group = chip->group; @@ -130,7 +130,7 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) return -EINVAL; if (!bank->handler) { - bank->chips = kzalloc(sizeof(struct s3c_gpio_chip *) * + bank->chips = kzalloc(sizeof(struct samsung_gpio_chip *) * bank->nr_groups, GFP_KERNEL); if (!bank->chips) return -ENOMEM; @@ -173,7 +173,7 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) int __init s5p_register_gpio_interrupt(int pin) { - struct s3c_gpio_chip *my_chip = s3c_gpiolib_getchip(pin); + struct samsung_gpio_chip *my_chip = samsung_gpiolib_getchip(pin); int offset, group; int ret; diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h index 9a4e53d5296..a181d7ce81c 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h @@ -1,11 +1,11 @@ -/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg-helper.h +/* linux/arch/arm/plat-samsung/include/plat/gpio-cfg-helper.h * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks * - * S3C Platform - GPIO pin configuration helper definitions + * Samsung Platform - GPIO pin configuration helper definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -24,120 +24,30 @@ * by disabling interrupts. */ -static inline int s3c_gpio_do_setcfg(struct s3c_gpio_chip *chip, - unsigned int off, unsigned int config) +static inline int samsung_gpio_do_setcfg(struct samsung_gpio_chip *chip, + unsigned int off, unsigned int config) { return (chip->config->set_config)(chip, off, config); } -static inline unsigned s3c_gpio_do_getcfg(struct s3c_gpio_chip *chip, - unsigned int off) +static inline unsigned samsung_gpio_do_getcfg(struct samsung_gpio_chip *chip, + unsigned int off) { return (chip->config->get_config)(chip, off); } -static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull) +static inline int samsung_gpio_do_setpull(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull) { return (chip->config->set_pull)(chip, off, pull); } -static inline s3c_gpio_pull_t s3c_gpio_do_getpull(struct s3c_gpio_chip *chip, - unsigned int off) +static inline samsung_gpio_pull_t samsung_gpio_do_getpull(struct samsung_gpio_chip *chip, + unsigned int off) { return chip->config->get_pull(chip, off); } -/** - * s3c_gpio_setcfg_s3c24xx - S3C24XX style GPIO configuration. - * @chip: The gpio chip that is being configured. - * @off: The offset for the GPIO being configured. - * @cfg: The configuration value to set. - * - * This helper deal with the GPIO cases where the control register - * has two bits of configuration per gpio, which have the following - * functions: - * 00 = input - * 01 = output - * 1x = special function -*/ -extern int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, - unsigned int off, unsigned int cfg); - -/** - * s3c_gpio_getcfg_s3c24xx - S3C24XX style GPIO configuration read. - * @chip: The gpio chip that is being configured. - * @off: The offset for the GPIO being configured. - * - * The reverse of s3c_gpio_setcfg_s3c24xx(). Will return a value whicg - * could be directly passed back to s3c_gpio_setcfg_s3c24xx(), from the - * S3C_GPIO_SPECIAL() macro. - */ -unsigned int s3c_gpio_getcfg_s3c24xx(struct s3c_gpio_chip *chip, - unsigned int off); - -/** - * s3c_gpio_setcfg_s3c24xx_a - S3C24XX style GPIO configuration (Bank A) - * @chip: The gpio chip that is being configured. - * @off: The offset for the GPIO being configured. - * @cfg: The configuration value to set. - * - * This helper deal with the GPIO cases where the control register - * has one bit of configuration for the gpio, where setting the bit - * means the pin is in special function mode and unset means output. -*/ -extern int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip, - unsigned int off, unsigned int cfg); - - -/** - * s3c_gpio_getcfg_s3c24xx_a - S3C24XX style GPIO configuration read (Bank A) - * @chip: The gpio chip that is being configured. - * @off: The offset for the GPIO being configured. - * - * The reverse of s3c_gpio_setcfg_s3c24xx_a() turning an GPIO into a usable - * GPIO configuration value. - * - * @sa s3c_gpio_getcfg_s3c24xx - * @sa s3c_gpio_getcfg_s3c64xx_4bit - */ -extern unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip, - unsigned int off); - -/** - * s3c_gpio_setcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config. - * @chip: The gpio chip that is being configured. - * @off: The offset for the GPIO being configured. - * @cfg: The configuration value to set. - * - * This helper deal with the GPIO cases where the control register has 4 bits - * of control per GPIO, generally in the form of: - * 0000 = Input - * 0001 = Output - * others = Special functions (dependent on bank) - * - * Note, since the code to deal with the case where there are two control - * registers instead of one, we do not have a separate set of functions for - * each case. -*/ -extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, - unsigned int off, unsigned int cfg); - - -/** - * s3c_gpio_getcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config read. - * @chip: The gpio chip that is being configured. - * @off: The offset for the GPIO being configured. - * - * The reverse of s3c_gpio_setcfg_s3c64xx_4bit(), turning a gpio configuration - * register setting into a value the software can use, such as could be passed - * to s3c_gpio_setcfg_s3c64xx_4bit(). - * - * @sa s3c_gpio_getcfg_s3c24xx - */ -extern unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, - unsigned int off); - /* Pull-{up,down} resistor controls. * * S3C2410,S3C2440 = Pull-UP, @@ -147,7 +57,7 @@ extern unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, */ /** - * s3c_gpio_setpull_1up() - Pull configuration for choice of up or none. + * s3c24xx_gpio_setpull_1up() - Pull configuration for choice of up or none. * @chip: The gpio chip that is being configured. * @off: The offset for the GPIO being configured. * @param: pull: The pull mode being requested. @@ -155,11 +65,11 @@ extern unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, * This is a helper function for the case where we have GPIOs with one * bit configuring the presence of a pull-up resistor. */ -extern int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull); +extern int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull); /** - * s3c_gpio_setpull_1down() - Pull configuration for choice of down or none + * s3c24xx_gpio_setpull_1down() - Pull configuration for choice of down or none * @chip: The gpio chip that is being configured * @off: The offset for the GPIO being configured * @param: pull: The pull mode being requested @@ -167,11 +77,13 @@ extern int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip, * This is a helper function for the case where we have GPIOs with one * bit configuring the presence of a pull-down resistor. */ -extern int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull); +extern int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull); /** - * s3c_gpio_setpull_upown() - Pull configuration for choice of up, down or none + * samsung_gpio_setpull_upown() - Pull configuration for choice of up, + * down or none + * * @chip: The gpio chip that is being configured. * @off: The offset for the GPIO being configured. * @param: pull: The pull mode being requested. @@ -183,45 +95,46 @@ extern int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip, * 01 = Pull-up resistor connected * 10 = Pull-down resistor connected */ -extern int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull); - +extern int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull); /** - * s3c_gpio_getpull_updown() - Get configuration for choice of up, down or none + * samsung_gpio_getpull_updown() - Get configuration for choice of up, + * down or none + * * @chip: The gpio chip that the GPIO pin belongs to * @off: The offset to the pin to get the configuration of. * - * This helper function reads the state of the pull-{up,down} resistor for the - * given GPIO in the same case as s3c_gpio_setpull_upown. + * This helper function reads the state of the pull-{up,down} resistor + * for the given GPIO in the same case as samsung_gpio_setpull_upown. */ -extern s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip, - unsigned int off); +extern samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip, + unsigned int off); /** - * s3c_gpio_getpull_1up() - Get configuration for choice of up or none + * s3c24xx_gpio_getpull_1up() - Get configuration for choice of up or none * @chip: The gpio chip that the GPIO pin belongs to * @off: The offset to the pin to get the configuration of. * * This helper function reads the state of the pull-up resistor for the - * given GPIO in the same case as s3c_gpio_setpull_1up. + * given GPIO in the same case as s3c24xx_gpio_setpull_1up. */ -extern s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip, - unsigned int off); +extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip, + unsigned int off); /** - * s3c_gpio_getpull_1down() - Get configuration for choice of down or none + * s3c24xx_gpio_getpull_1down() - Get configuration for choice of down or none * @chip: The gpio chip that the GPIO pin belongs to * @off: The offset to the pin to get the configuration of. * * This helper function reads the state of the pull-down resistor for the - * given GPIO in the same case as s3c_gpio_setpull_1down. + * given GPIO in the same case as s3c24xx_gpio_setpull_1down. */ -extern s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip, - unsigned int off); +extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip, + unsigned int off); /** - * s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443. + * s3c2443_gpio_setpull() - Pull configuration for s3c2443. * @chip: The gpio chip that is being configured. * @off: The offset for the GPIO being configured. * @param: pull: The pull mode being requested. @@ -233,19 +146,18 @@ extern s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip, * 10 = Pull-down resistor connected * x1 = No pull up resistor */ -extern int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull); +extern int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull); /** - * s3c_gpio_getpull_s3c2443() - Get configuration for s3c2443 pull resistors + * s3c2443_gpio_getpull() - Get configuration for s3c2443 pull resistors * @chip: The gpio chip that the GPIO pin belongs to. * @off: The offset to the pin to get the configuration of. * * This helper function reads the state of the pull-{up,down} resistor for the - * given GPIO in the same case as s3c_gpio_setpull_upown. + * given GPIO in the same case as samsung_gpio_setpull_upown. */ -extern s3c_gpio_pull_t s3c_gpio_getpull_s3c2443(struct s3c_gpio_chip *chip, +extern samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip, unsigned int off); #endif /* __PLAT_GPIO_CFG_HELPERS_H */ - diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index 1762dcb4cb9..d48245bb02b 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -24,14 +24,14 @@ #ifndef __PLAT_GPIO_CFG_H #define __PLAT_GPIO_CFG_H __FILE__ -typedef unsigned int __bitwise__ s3c_gpio_pull_t; +typedef unsigned int __bitwise__ samsung_gpio_pull_t; typedef unsigned int __bitwise__ s5p_gpio_drvstr_t; /* forward declaration if gpio-core.h hasn't been included */ -struct s3c_gpio_chip; +struct samsung_gpio_chip; /** - * struct s3c_gpio_cfg GPIO configuration + * struct samsung_gpio_cfg GPIO configuration * @cfg_eint: Configuration setting when used for external interrupt source * @get_pull: Read the current pull configuration for the GPIO * @set_pull: Set the current pull configuraiton for the GPIO @@ -44,20 +44,20 @@ struct s3c_gpio_chip; * per-bank configuration information that other systems such as the * external interrupt code will need. * - * @sa s3c_gpio_cfgpin + * @sa samsung_gpio_cfgpin * @sa s3c_gpio_getcfg * @sa s3c_gpio_setpull * @sa s3c_gpio_getpull */ -struct s3c_gpio_cfg { +struct samsung_gpio_cfg { unsigned int cfg_eint; - s3c_gpio_pull_t (*get_pull)(struct s3c_gpio_chip *chip, unsigned offs); - int (*set_pull)(struct s3c_gpio_chip *chip, unsigned offs, - s3c_gpio_pull_t pull); + samsung_gpio_pull_t (*get_pull)(struct samsung_gpio_chip *chip, unsigned offs); + int (*set_pull)(struct samsung_gpio_chip *chip, unsigned offs, + samsung_gpio_pull_t pull); - unsigned (*get_config)(struct s3c_gpio_chip *chip, unsigned offs); - int (*set_config)(struct s3c_gpio_chip *chip, unsigned offs, + unsigned (*get_config)(struct samsung_gpio_chip *chip, unsigned offs); + int (*set_config)(struct samsung_gpio_chip *chip, unsigned offs, unsigned config); }; @@ -69,7 +69,7 @@ struct s3c_gpio_cfg { #define S3C_GPIO_OUTPUT (S3C_GPIO_SPECIAL(1)) #define S3C_GPIO_SFN(x) (S3C_GPIO_SPECIAL(x)) -#define s3c_gpio_is_cfg_special(_cfg) \ +#define samsung_gpio_is_cfg_special(_cfg) \ (((_cfg) & S3C_GPIO_SPECIAL_MARK) == S3C_GPIO_SPECIAL_MARK) /** @@ -128,9 +128,9 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr, * up or down settings, and it may be dependent on the chip that is being * used to whether the particular mode is available. */ -#define S3C_GPIO_PULL_NONE ((__force s3c_gpio_pull_t)0x00) -#define S3C_GPIO_PULL_DOWN ((__force s3c_gpio_pull_t)0x01) -#define S3C_GPIO_PULL_UP ((__force s3c_gpio_pull_t)0x02) +#define S3C_GPIO_PULL_NONE ((__force samsung_gpio_pull_t)0x00) +#define S3C_GPIO_PULL_DOWN ((__force samsung_gpio_pull_t)0x01) +#define S3C_GPIO_PULL_UP ((__force samsung_gpio_pull_t)0x02) /** * s3c_gpio_setpull() - set the state of a gpio pin pull resistor @@ -143,7 +143,7 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr, * * @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP. */ -extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull); +extern int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull); /** * s3c_gpio_getpull() - get the pull resistor state of a gpio pin @@ -151,7 +151,7 @@ extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull); * * Read the pull resistor value for the specified pin. */ -extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin); +extern samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin); /* configure `all` aspects of an gpio */ @@ -170,7 +170,7 @@ extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin); * @sa s3c_gpio_cfgpin_range */ extern int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr, - unsigned int cfg, s3c_gpio_pull_t pull); + unsigned int cfg, samsung_gpio_pull_t pull); static inline int s3c_gpio_cfgrange_nopull(unsigned int pin, unsigned int size, unsigned int cfg) diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h index 8cad4cf19c3..1fe6917f6a2 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-core.h +++ b/arch/arm/plat-samsung/include/plat/gpio-core.h @@ -25,22 +25,22 @@ * specific code. */ -struct s3c_gpio_chip; +struct samsung_gpio_chip; /** - * struct s3c_gpio_pm - power management (suspend/resume) information + * struct samsung_gpio_pm - power management (suspend/resume) information * @save: Routine to save the state of the GPIO block * @resume: Routine to resume the GPIO block. */ -struct s3c_gpio_pm { - void (*save)(struct s3c_gpio_chip *chip); - void (*resume)(struct s3c_gpio_chip *chip); +struct samsung_gpio_pm { + void (*save)(struct samsung_gpio_chip *chip); + void (*resume)(struct samsung_gpio_chip *chip); }; -struct s3c_gpio_cfg; +struct samsung_gpio_cfg; /** - * struct s3c_gpio_chip - wrapper for specific implementation of gpio + * struct samsung_gpio_chip - wrapper for specific implementation of gpio * @chip: The chip structure to be exported via gpiolib. * @base: The base pointer to the gpio configuration registers. * @group: The group register number for gpio interrupt support. @@ -60,10 +60,10 @@ struct s3c_gpio_cfg; * CPU cores trying to get one lock for different GPIO banks, where each * bank of GPIO has its own register space and configuration registers. */ -struct s3c_gpio_chip { +struct samsung_gpio_chip { struct gpio_chip chip; - struct s3c_gpio_cfg *config; - struct s3c_gpio_pm *pm; + struct samsung_gpio_cfg *config; + struct samsung_gpio_pm *pm; void __iomem *base; int irq_base; int group; @@ -73,58 +73,11 @@ struct s3c_gpio_chip { #endif }; -static inline struct s3c_gpio_chip *to_s3c_gpio(struct gpio_chip *gpc) +static inline struct samsung_gpio_chip *to_samsung_gpio(struct gpio_chip *gpc) { - return container_of(gpc, struct s3c_gpio_chip, chip); + return container_of(gpc, struct samsung_gpio_chip, chip); } -/** s3c_gpiolib_add() - add the s3c specific version of a gpio_chip. - * @chip: The chip to register - * - * This is a wrapper to gpiochip_add() that takes our specific gpio chip - * information and makes the necessary alterations for the platform and - * notes the information for use with the configuration systems and any - * other parts of the system. - */ -extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip); - -/* CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios - * for use with the configuration calls, and other parts of the s3c gpiolib - * support code. - * - * Not all s3c support code will need this, as some configurations of cpu - * may only support one or two different configuration options and have an - * easy gpio to s3c_gpio_chip mapping function. If this is the case, then - * the machine support file should provide its own s3c_gpiolib_getchip() - * and any other necessary functions. - */ - -/** - * samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config. - * @chip: The gpio chip that is being configured. - * @nr_chips: The no of chips (gpio ports) for the GPIO being configured. - * - * This helper deal with the GPIO cases where the control register has 4 bits - * of control per GPIO, generally in the form of: - * 0000 = Input - * 0001 = Output - * others = Special functions (dependent on bank) - * - * Note, since the code to deal with the case where there are two control - * registers instead of one, we do not have a separate set of function - * (samsung_gpiolib_add_4bit2_chips)for each case. - */ -extern void samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip, - int nr_chips); -extern void samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip, - int nr_chips); -extern void samsung_gpiolib_add_2bit_chips(struct s3c_gpio_chip *chip, - int nr_chips); - -extern void samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip); -extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip); - - /** * samsung_gpiolib_to_irq - convert gpio pin to irq number * @chip: The gpio chip that the pin belongs to. @@ -136,36 +89,36 @@ extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip); extern int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset); /* exported for core SoC support to change */ -extern struct s3c_gpio_cfg s3c24xx_gpiocfg_default; +extern struct samsung_gpio_cfg s3c24xx_gpiocfg_default; #ifdef CONFIG_S3C_GPIO_TRACK -extern struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END]; +extern struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END]; -static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int chip) +static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int chip) { return (chip < S3C_GPIO_END) ? s3c_gpios[chip] : NULL; } #else -/* machine specific code should provide s3c_gpiolib_getchip */ +/* machine specific code should provide samsung_gpiolib_getchip */ #include -static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { } +static inline void s3c_gpiolib_track(struct samsung_gpio_chip *chip) { } #endif #ifdef CONFIG_PM -extern struct s3c_gpio_pm s3c_gpio_pm_1bit; -extern struct s3c_gpio_pm s3c_gpio_pm_2bit; -extern struct s3c_gpio_pm s3c_gpio_pm_4bit; +extern struct samsung_gpio_pm samsung_gpio_pm_1bit; +extern struct samsung_gpio_pm samsung_gpio_pm_2bit; +extern struct samsung_gpio_pm samsung_gpio_pm_4bit; #define __gpio_pm(x) x #else -#define s3c_gpio_pm_1bit NULL -#define s3c_gpio_pm_2bit NULL -#define s3c_gpio_pm_4bit NULL +#define samsung_gpio_pm_1bit NULL +#define samsung_gpio_pm_2bit NULL +#define samsung_gpio_pm_4bit NULL #define __gpio_pm(x) NULL #endif /* CONFIG_PM */ /* locking wrappers to deal with multiple access to the same gpio bank */ -#define s3c_gpio_lock(_oc, _fl) spin_lock_irqsave(&(_oc)->lock, _fl) -#define s3c_gpio_unlock(_oc, _fl) spin_unlock_irqrestore(&(_oc)->lock, _fl) +#define samsung_gpio_lock(_oc, _fl) spin_lock_irqsave(&(_oc)->lock, _fl) +#define samsung_gpio_unlock(_oc, _fl) spin_unlock_irqrestore(&(_oc)->lock, _fl) diff --git a/arch/arm/plat-samsung/include/plat/gpio-fns.h b/arch/arm/plat-samsung/include/plat/gpio-fns.h new file mode 100644 index 00000000000..bab13920176 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/gpio-fns.h @@ -0,0 +1,98 @@ +/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h + * + * Copyright (c) 2003-2009 Simtec Electronics + * Ben Dooks + * + * S3C2410 - hardware + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __MACH_GPIO_FNS_H +#define __MACH_GPIO_FNS_H __FILE__ + +/* These functions are in the to-be-removed category and it is strongly + * encouraged not to use these in new code. They will be marked deprecated + * very soon. + * + * Most of the functionality can be either replaced by the gpiocfg calls + * for the s3c platform or by the generic GPIOlib API. + * + * As of 2.6.35-rc, these will be removed, with the few drivers using them + * either replaced or given a wrapper until the calls can be removed. +*/ + +#include + +static inline void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int cfg) +{ + /* 1:1 mapping between cfgpin and setcfg calls at the moment */ + s3c_gpio_cfgpin(pin, cfg); +} + +/* external functions for GPIO support + * + * These allow various different clients to access the same GPIO + * registers without conflicting. If your driver only owns the entire + * GPIO register, then it is safe to ioremap/__raw_{read|write} to it. +*/ + +extern unsigned int s3c2410_gpio_getcfg(unsigned int pin); + +/* s3c2410_gpio_getirq + * + * turn the given pin number into the corresponding IRQ number + * + * returns: + * < 0 = no interrupt for this pin + * >=0 = interrupt number for the pin +*/ + +extern int s3c2410_gpio_getirq(unsigned int pin); + +/* s3c2410_gpio_irqfilter + * + * set the irq filtering on the given pin + * + * on = 0 => disable filtering + * 1 => enable filtering + * + * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with + * width of filter (0 through 63) + * + * +*/ + +extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, + unsigned int config); + +/* s3c2410_gpio_pullup + * + * This call should be replaced with s3c_gpio_setpull(). + * + * As a note, there is currently no distinction between pull-up and pull-down + * in the s3c24xx series devices with only an on/off configuration. + */ + +/* s3c2410_gpio_pullup + * + * configure the pull-up control on the given pin + * + * to = 1 => disable the pull-up + * 0 => enable the pull-up + * + * eg; + * + * s3c2410_gpio_pullup(S3C2410_GPB(0), 0); + * s3c2410_gpio_pullup(S3C2410_GPE(8), 0); +*/ + +extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to); + +extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to); + +extern unsigned int s3c2410_gpio_getpin(unsigned int pin); + +#endif /* __MACH_GPIO_FNS_H */ diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h index f6749916d19..dcf68709f9c 100644 --- a/arch/arm/plat-samsung/include/plat/pm.h +++ b/arch/arm/plat-samsung/include/plat/pm.h @@ -165,20 +165,20 @@ extern void s3c_pm_check_store(void); extern void s3c_pm_configure_extint(void); /** - * s3c_pm_restore_gpios() - restore the state of the gpios after sleep. + * samsung_pm_restore_gpios() - restore the state of the gpios after sleep. * * Restore the state of the GPIO pins after sleep, which may involve ensuring * that we do not glitch the state of the pins from that the bootloader's * resume code has done. */ -extern void s3c_pm_restore_gpios(void); +extern void samsung_pm_restore_gpios(void); /** - * s3c_pm_save_gpios() - save the state of the GPIOs for restoring after sleep. + * samsung_pm_save_gpios() - save the state of the GPIOs for restoring after sleep. * - * Save the GPIO states for resotration on resume. See s3c_pm_restore_gpios(). + * Save the GPIO states for resotration on resume. See samsung_pm_restore_gpios(). */ -extern void s3c_pm_save_gpios(void); +extern void samsung_pm_save_gpios(void); extern void s3c_pm_save_core(void); extern void s3c_pm_restore_core(void); diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c index 96528200eb7..4be016eaa6d 100644 --- a/arch/arm/plat-samsung/pm-gpio.c +++ b/arch/arm/plat-samsung/pm-gpio.c @@ -28,13 +28,13 @@ #define OFFS_DAT (0x04) #define OFFS_UP (0x08) -static void s3c_gpio_pm_1bit_save(struct s3c_gpio_chip *chip) +static void samsung_gpio_pm_1bit_save(struct samsung_gpio_chip *chip) { chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON); chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT); } -static void s3c_gpio_pm_1bit_resume(struct s3c_gpio_chip *chip) +static void samsung_gpio_pm_1bit_resume(struct samsung_gpio_chip *chip) { void __iomem *base = chip->base; u32 old_gpcon = __raw_readl(base + OFFS_CON); @@ -60,12 +60,12 @@ static void s3c_gpio_pm_1bit_resume(struct s3c_gpio_chip *chip) chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat); } -struct s3c_gpio_pm s3c_gpio_pm_1bit = { - .save = s3c_gpio_pm_1bit_save, - .resume = s3c_gpio_pm_1bit_resume, +struct samsung_gpio_pm samsung_gpio_pm_1bit = { + .save = samsung_gpio_pm_1bit_save, + .resume = samsung_gpio_pm_1bit_resume, }; -static void s3c_gpio_pm_2bit_save(struct s3c_gpio_chip *chip) +static void samsung_gpio_pm_2bit_save(struct samsung_gpio_chip *chip) { chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON); chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT); @@ -95,7 +95,7 @@ static inline int is_out(unsigned long con) } /** - * s3c_gpio_pm_2bit_resume() - restore the given GPIO bank + * samsung_gpio_pm_2bit_resume() - restore the given GPIO bank * @chip: The chip information to resume. * * Restore one of the GPIO banks that was saved during suspend. This is @@ -121,7 +121,7 @@ static inline int is_out(unsigned long con) * [1] this assumes that writing to a pin DAT whilst in SFN will set the * state for when it is next output. */ -static void s3c_gpio_pm_2bit_resume(struct s3c_gpio_chip *chip) +static void samsung_gpio_pm_2bit_resume(struct samsung_gpio_chip *chip) { void __iomem *base = chip->base; u32 old_gpcon = __raw_readl(base + OFFS_CON); @@ -187,13 +187,13 @@ static void s3c_gpio_pm_2bit_resume(struct s3c_gpio_chip *chip) chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat); } -struct s3c_gpio_pm s3c_gpio_pm_2bit = { - .save = s3c_gpio_pm_2bit_save, - .resume = s3c_gpio_pm_2bit_resume, +struct samsung_gpio_pm samsung_gpio_pm_2bit = { + .save = samsung_gpio_pm_2bit_save, + .resume = samsung_gpio_pm_2bit_resume, }; #if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P) -static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip) +static void samsung_gpio_pm_4bit_save(struct samsung_gpio_chip *chip) { chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON); chip->pm_save[2] = __raw_readl(chip->base + OFFS_DAT); @@ -203,7 +203,7 @@ static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip) chip->pm_save[0] = __raw_readl(chip->base - 4); } -static u32 s3c_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon) +static u32 samsung_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon) { u32 old, new, mask; u32 change_mask = 0x0; @@ -242,14 +242,14 @@ static u32 s3c_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon) return change_mask; } -static void s3c_gpio_pm_4bit_con(struct s3c_gpio_chip *chip, int index) +static void samsung_gpio_pm_4bit_con(struct samsung_gpio_chip *chip, int index) { void __iomem *con = chip->base + (index * 4); u32 old_gpcon = __raw_readl(con); u32 gps_gpcon = chip->pm_save[index + 1]; u32 gpcon, mask; - mask = s3c_gpio_pm_4bit_mask(old_gpcon, gps_gpcon); + mask = samsung_gpio_pm_4bit_mask(old_gpcon, gps_gpcon); gpcon = old_gpcon & ~mask; gpcon |= gps_gpcon & mask; @@ -257,7 +257,7 @@ static void s3c_gpio_pm_4bit_con(struct s3c_gpio_chip *chip, int index) __raw_writel(gpcon, con); } -static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip) +static void samsung_gpio_pm_4bit_resume(struct samsung_gpio_chip *chip) { void __iomem *base = chip->base; u32 old_gpcon[2]; @@ -269,10 +269,10 @@ static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip) old_gpcon[0] = 0; old_gpcon[1] = __raw_readl(base + OFFS_CON); - s3c_gpio_pm_4bit_con(chip, 0); + samsung_gpio_pm_4bit_con(chip, 0); if (chip->chip.ngpio > 8) { old_gpcon[0] = __raw_readl(base - 4); - s3c_gpio_pm_4bit_con(chip, -1); + samsung_gpio_pm_4bit_con(chip, -1); } /* Now change the configurations that require DAT,CON */ @@ -298,19 +298,19 @@ static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip) old_gpdat, gps_gpdat); } -struct s3c_gpio_pm s3c_gpio_pm_4bit = { - .save = s3c_gpio_pm_4bit_save, - .resume = s3c_gpio_pm_4bit_resume, +struct samsung_gpio_pm samsung_gpio_pm_4bit = { + .save = samsung_gpio_pm_4bit_save, + .resume = samsung_gpio_pm_4bit_resume, }; #endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P */ /** - * s3c_pm_save_gpio() - save gpio chip data for suspend + * samsung_pm_save_gpio() - save gpio chip data for suspend * @ourchip: The chip for suspend. */ -static void s3c_pm_save_gpio(struct s3c_gpio_chip *ourchip) +static void samsung_pm_save_gpio(struct samsung_gpio_chip *ourchip) { - struct s3c_gpio_pm *pm = ourchip->pm; + struct samsung_gpio_pm *pm = ourchip->pm; if (pm == NULL || pm->save == NULL) S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label); @@ -319,24 +319,24 @@ static void s3c_pm_save_gpio(struct s3c_gpio_chip *ourchip) } /** - * s3c_pm_save_gpios() - Save the state of the GPIO banks. + * samsung_pm_save_gpios() - Save the state of the GPIO banks. * * For all the GPIO banks, save the state of each one ready for going * into a suspend mode. */ -void s3c_pm_save_gpios(void) +void samsung_pm_save_gpios(void) { - struct s3c_gpio_chip *ourchip; + struct samsung_gpio_chip *ourchip; unsigned int gpio_nr; for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) { - ourchip = s3c_gpiolib_getchip(gpio_nr); + ourchip = samsung_gpiolib_getchip(gpio_nr); if (!ourchip) { gpio_nr++; continue; } - s3c_pm_save_gpio(ourchip); + samsung_pm_save_gpio(ourchip); S3C_PMDBG("%s: save %08x,%08x,%08x,%08x\n", ourchip->chip.label, @@ -351,12 +351,12 @@ void s3c_pm_save_gpios(void) } /** - * s3c_pm_resume_gpio() - restore gpio chip data after suspend + * samsung_pm_resume_gpio() - restore gpio chip data after suspend * @ourchip: The suspended chip. */ -static void s3c_pm_resume_gpio(struct s3c_gpio_chip *ourchip) +static void samsung_pm_resume_gpio(struct samsung_gpio_chip *ourchip) { - struct s3c_gpio_pm *pm = ourchip->pm; + struct samsung_gpio_pm *pm = ourchip->pm; if (pm == NULL || pm->resume == NULL) S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label); @@ -364,19 +364,19 @@ static void s3c_pm_resume_gpio(struct s3c_gpio_chip *ourchip) pm->resume(ourchip); } -void s3c_pm_restore_gpios(void) +void samsung_pm_restore_gpios(void) { - struct s3c_gpio_chip *ourchip; + struct samsung_gpio_chip *ourchip; unsigned int gpio_nr; for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) { - ourchip = s3c_gpiolib_getchip(gpio_nr); + ourchip = samsung_gpiolib_getchip(gpio_nr); if (!ourchip) { gpio_nr++; continue; } - s3c_pm_resume_gpio(ourchip); + samsung_pm_resume_gpio(ourchip); gpio_nr += ourchip->chip.ngpio; gpio_nr += CONFIG_S3C_GPIO_SPACE; diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index ae6f99834cd..64ab65f0fdb 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -268,8 +268,8 @@ static int s3c_pm_enter(suspend_state_t state) /* save all necessary core registers not covered by the drivers */ - s3c_pm_save_gpios(); - s3c_pm_saved_gpios(); + samsung_pm_save_gpios(); + samsung_pm_saved_gpios(); s3c_pm_save_uarts(); s3c_pm_save_core(); @@ -306,7 +306,7 @@ static int s3c_pm_enter(suspend_state_t state) s3c_pm_restore_core(); s3c_pm_restore_uarts(); - s3c_pm_restore_gpios(); + samsung_pm_restore_gpios(); s3c_pm_restored_gpios(); s3c_pm_debug_init(); -- cgit v1.2.3-18-g5258 From 5ec7414494ed1204c9e2ed0b8232b29860d0986f Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Tue, 30 Aug 2011 20:35:05 +0900 Subject: ARM: SAMSUNG: Remove useless Samsung GPIO related CONFIGs Cc: Ben Dooks Signed-off-by: Kukjin Kim --- arch/arm/Kconfig | 3 --- arch/arm/mach-s3c2410/Kconfig | 1 - arch/arm/mach-s3c2416/Kconfig | 1 - arch/arm/mach-s3c2440/Kconfig | 2 -- arch/arm/mach-s3c2443/Kconfig | 1 - arch/arm/plat-s3c24xx/Kconfig | 1 - arch/arm/plat-s5p/Kconfig | 3 --- arch/arm/plat-samsung/Kconfig | 27 --------------------------- 8 files changed, 39 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 3269576dbfa..42401daa165 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -724,9 +724,6 @@ config ARCH_S3C64XX select SAMSUNG_IRQ_VIC_TIMER select SAMSUNG_IRQ_UART select S3C_GPIO_TRACK - select S3C_GPIO_PULL_UPDOWN - select S3C_GPIO_CFG_S3C24XX - select S3C_GPIO_CFG_S3C64XX select S3C_DEV_NAND select USB_ARCH_HAS_OHCI select SAMSUNG_GPIOLIB_4BIT diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 3700cf32af0..5261a7ed099 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -6,7 +6,6 @@ config CPU_S3C2410 bool depends on ARCH_S3C2410 select CPU_ARM920T - select S3C_GPIO_PULL_UP select S3C2410_CLOCK select CPU_LLSERIAL_S3C2410 select S3C2410_PM if PM diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig index 69b48a7d1db..84c7b03e5a3 100644 --- a/arch/arm/mach-s3c2416/Kconfig +++ b/arch/arm/mach-s3c2416/Kconfig @@ -13,7 +13,6 @@ config CPU_S3C2416 select CPU_ARM926T select S3C2416_DMA if S3C2410_DMA select CPU_LLSERIAL_S3C2440 - select S3C_GPIO_PULL_UPDOWN select SAMSUNG_CLKSRC select S3C2443_CLOCK help diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index c461fb8e15c..914e620f125 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -5,7 +5,6 @@ config CPU_S3C2440 bool select CPU_ARM920T - select S3C_GPIO_PULL_UP select S3C2410_CLOCK select S3C2410_PM if PM select S3C2440_DMA if S3C2410_DMA @@ -17,7 +16,6 @@ config CPU_S3C2440 config CPU_S3C2442 bool select CPU_ARM920T - select S3C_GPIO_PULL_DOWN select S3C2410_CLOCK select S3C2410_PM if PM select CPU_S3C244X diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig index d8eb86823df..8814031516c 100644 --- a/arch/arm/mach-s3c2443/Kconfig +++ b/arch/arm/mach-s3c2443/Kconfig @@ -10,7 +10,6 @@ config CPU_S3C2443 select CPU_LLSERIAL_S3C2440 select SAMSUNG_CLKSRC select S3C2443_CLOCK - select S3C_GPIO_PULL_S3C2443 help Support for the S3C2443 SoC from the S3C24XX line diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index 8c5b3029b39..d8973ac46bc 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -9,7 +9,6 @@ config PLAT_S3C24XX select NO_IOPORT select ARCH_REQUIRE_GPIOLIB select S3C_DEV_NAND - select S3C_GPIO_CFG_S3C24XX help Base platform code for any Samsung S3C24XX device diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index 9843c954c04..ac610bee2cb 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -16,9 +16,6 @@ config PLAT_S5P select S3C_GPIO_TRACK select S5P_GPIO_DRVSTR select SAMSUNG_GPIOLIB_4BIT - select S3C_GPIO_CFG_S3C64XX - select S3C_GPIO_PULL_UPDOWN - select S3C_GPIO_CFG_S3C24XX select PLAT_SAMSUNG select SAMSUNG_CLKSRC select SAMSUNG_IRQ_VIC_TIMER diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index b3e10659e4b..1f346d22323 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -79,39 +79,12 @@ config SAMSUNG_GPIOLIB_4BIT configuration. GPIOlib shall be compiled only for S3C64XX and S5P series of processors. -config S3C_GPIO_CFG_S3C24XX - bool - help - Internal configuration to enable S3C24XX style GPIO configuration - functions. - config S3C_GPIO_CFG_S3C64XX bool help Internal configuration to enable S3C64XX style GPIO configuration functions. -config S3C_GPIO_PULL_UPDOWN - bool - help - Internal configuration to enable the correct GPIO pull helper - -config S3C_GPIO_PULL_S3C2443 - bool - select S3C_GPIO_PULL_UPDOWN - help - Internal configuration to enable the correct GPIO pull helper for S3C2443-style GPIO - -config S3C_GPIO_PULL_DOWN - bool - help - Internal configuration to enable the correct GPIO pull helper - -config S3C_GPIO_PULL_UP - bool - help - Internal configuration to enable the correct GPIO pull helper - config S5P_GPIO_DRVSTR bool help -- cgit v1.2.3-18-g5258 From d5160ecffce97ad354caa5a8762edb8c350f9e84 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 26 Sep 2011 13:18:28 +0900 Subject: ARM: S3C64xx: Add LDOVDD supply for CODEC on Cragganmore Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/mach-crag6410.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index a0422a71999..ed332dd7bf4 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -567,6 +567,7 @@ static struct regulator_init_data pvdd_1v2 __initdata = { }; static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = { + REGULATOR_SUPPLY("LDOVDD", "1-001a"), REGULATOR_SUPPLY("PLLVDD", "1-001a"), REGULATOR_SUPPLY("DBVDD", "1-001a"), REGULATOR_SUPPLY("DBVDD1", "1-001a"), -- cgit v1.2.3-18-g5258 From 24f9e1f31471abbd2af62eb529deee90bad4c65c Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Wed, 31 Aug 2011 15:47:16 +0900 Subject: ARM: EXYNOS4: Add USB EHCI device to ORIGEN board Signed-off-by: Pankaj Dubey Signed-off-by: Sachin Kamat [kgene.kim@samsung.com: re-ordering changes in Kconfig] Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos4/Kconfig | 2 ++ arch/arm/mach-exynos4/mach-origen.c | 17 +++++++++++++++++ 2 files changed, 19 insertions(+) diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index 3ceefdbadd1..3034a736f82 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -224,7 +224,9 @@ config MACH_ORIGEN select S3C_DEV_RTC select S3C_DEV_WDT select S3C_DEV_HSMMC2 + select S5P_DEV_USB_EHCI select EXYNOS4_SETUP_SDHCI + select EXYNOS4_SETUP_USB_PHY help Machine support for ORIGEN based on Samsung EXYNOS4210 diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c index ed59f86001a..d101756ef7d 100644 --- a/arch/arm/mach-exynos4/mach-origen.c +++ b/arch/arm/mach-exynos4/mach-origen.c @@ -24,6 +24,8 @@ #include #include #include +#include +#include #include @@ -79,10 +81,21 @@ static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = { .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; +/* USB EHCI */ +static struct s5p_ehci_platdata origen_ehci_pdata; + +static void __init origen_ehci_init(void) +{ + struct s5p_ehci_platdata *pdata = &origen_ehci_pdata; + + s5p_ehci_set_platdata(pdata); +} + static struct platform_device *origen_devices[] __initdata = { &s3c_device_hsmmc2, &s3c_device_rtc, &s3c_device_wdt, + &s5p_device_ehci, }; static void __init origen_map_io(void) @@ -95,6 +108,10 @@ static void __init origen_map_io(void) static void __init origen_machine_init(void) { s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata); + + origen_ehci_init(); + clk_xusbxti.rate = 24000000; + platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices)); } -- cgit v1.2.3-18-g5258 From 6f8eb324a395da5bd0c0b113944f2906272e14bd Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Wed, 31 Aug 2011 15:52:27 +0900 Subject: ARM: EXYNOS4: Add FIMC device on ORIGEN board This patch adds definitions to enable support for s5p-fimc driver on ORIGEN board. Signed-off-by: Sachin Kamat [kgene.kim@samsung.com: re-ordering changes] Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos4/Kconfig | 4 ++++ arch/arm/mach-exynos4/mach-origen.c | 4 ++++ 2 files changed, 8 insertions(+) diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index 3034a736f82..9c920b2acc3 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -224,6 +224,10 @@ config MACH_ORIGEN select S3C_DEV_RTC select S3C_DEV_WDT select S3C_DEV_HSMMC2 + select S5P_DEV_FIMC0 + select S5P_DEV_FIMC1 + select S5P_DEV_FIMC2 + select S5P_DEV_FIMC3 select S5P_DEV_USB_EHCI select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c index d101756ef7d..7ac71878767 100644 --- a/arch/arm/mach-exynos4/mach-origen.c +++ b/arch/arm/mach-exynos4/mach-origen.c @@ -96,6 +96,10 @@ static struct platform_device *origen_devices[] __initdata = { &s3c_device_rtc, &s3c_device_wdt, &s5p_device_ehci, + &s5p_device_fimc0, + &s5p_device_fimc1, + &s5p_device_fimc2, + &s5p_device_fimc3, }; static void __init origen_map_io(void) -- cgit v1.2.3-18-g5258 From 9edff0f79f5b98e6abfabfa27b31d155e3c994e1 Mon Sep 17 00:00:00 2001 From: Giridhar Maruthy Date: Wed, 31 Aug 2011 15:58:52 +0900 Subject: ARM: EXYNOS4: Add PWM backlight support on ORIGEN This patch adds support for LCD backlight using PWM timer on ORIGEN board. Signed-off-by: Giridhar Maruthy Signed-off-by: Sachin Kamat Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos4/Kconfig | 2 ++ arch/arm/mach-exynos4/mach-origen.c | 16 ++++++++++++++++ 2 files changed, 18 insertions(+) diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index 9c920b2acc3..86cf4fd47b3 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -229,6 +229,8 @@ config MACH_ORIGEN select S5P_DEV_FIMC2 select S5P_DEV_FIMC3 select S5P_DEV_USB_EHCI + select SAMSUNG_DEV_BACKLIGHT + select SAMSUNG_DEV_PWM select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY help diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c index 7ac71878767..937db75688d 100644 --- a/arch/arm/mach-exynos4/mach-origen.c +++ b/arch/arm/mach-exynos4/mach-origen.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -26,6 +27,8 @@ #include #include #include +#include +#include #include @@ -102,6 +105,17 @@ static struct platform_device *origen_devices[] __initdata = { &s5p_device_fimc3, }; +/* LCD Backlight data */ +static struct samsung_bl_gpio_info origen_bl_gpio_info = { + .no = EXYNOS4_GPD0(0), + .func = S3C_GPIO_SFN(2), +}; + +static struct platform_pwm_backlight_data origen_bl_data = { + .pwm_id = 0, + .pwm_period_ns = 1000, +}; + static void __init origen_map_io(void) { s5p_init_io(NULL, 0, S5P_VA_CHIPID); @@ -117,6 +131,8 @@ static void __init origen_machine_init(void) clk_xusbxti.rate = 24000000; platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices)); + + samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data); } MACHINE_START(ORIGEN, "ORIGEN") -- cgit v1.2.3-18-g5258 From 92e41efd73918d28ad48a937489e6f2a02140057 Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Wed, 31 Aug 2011 16:01:15 +0900 Subject: ARM: EXYNOS4: Fix sdhci card detection for ORIGEN Fix incorrect value of cd_type field in platform data for sdhci device. Signed-off-by: Tushar Behera Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos4/mach-origen.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c index 937db75688d..0e3b81634c2 100644 --- a/arch/arm/mach-exynos4/mach-origen.c +++ b/arch/arm/mach-exynos4/mach-origen.c @@ -78,9 +78,7 @@ static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = { }; static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = EXYNOS4_GPK2(2), - .ext_cd_gpio_invert = 1, + .cd_type = S3C_SDHCI_CD_INTERNAL, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; -- cgit v1.2.3-18-g5258 From cf1dad9d7f14ddf555baa0fcc82d17d5f29d3ae2 Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Wed, 31 Aug 2011 16:57:37 +0900 Subject: ARM: EXYNOS4: Add support for secondary MMC port on ORIGEN Secondary MMC port on ORIGEN is connected to sdhci instance 0. Support for secondary MMC port is extended by registering sdhci instance 0. Since sdhci instance 2 can contain a bootable media, sdhci instance 0 is registered after instance 2. Signed-off-by: Tushar Behera [kgene.kim@samsung.com: Added comments in registering sdhci] Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos4/Kconfig | 1 + arch/arm/mach-exynos4/mach-origen.c | 11 +++++++++++ 2 files changed, 12 insertions(+) diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index 86cf4fd47b3..00c645426d3 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -223,6 +223,7 @@ config MACH_ORIGEN select CPU_EXYNOS4210 select S3C_DEV_RTC select S3C_DEV_WDT + select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c index 0e3b81634c2..cd5195f9354 100644 --- a/arch/arm/mach-exynos4/mach-origen.c +++ b/arch/arm/mach-exynos4/mach-origen.c @@ -77,6 +77,11 @@ static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = { }, }; +static struct s3c_sdhci_platdata origen_hsmmc0_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_INTERNAL, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +}; + static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = { .cd_type = S3C_SDHCI_CD_INTERNAL, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, @@ -94,6 +99,7 @@ static void __init origen_ehci_init(void) static struct platform_device *origen_devices[] __initdata = { &s3c_device_hsmmc2, + &s3c_device_hsmmc0, &s3c_device_rtc, &s3c_device_wdt, &s5p_device_ehci, @@ -123,7 +129,12 @@ static void __init origen_map_io(void) static void __init origen_machine_init(void) { + /* + * Since sdhci instance 2 can contain a bootable media, + * sdhci instance 0 is registered after instance 2. + */ s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata); + s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata); origen_ehci_init(); clk_xusbxti.rate = 24000000; -- cgit v1.2.3-18-g5258 From c86cfdd012498ddab2b2eb23fad201637a77acf4 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 16 Sep 2011 21:41:25 +0900 Subject: ARM: EXYNOS4: Add keypad support for ORIGEN This patch adds keypad support for ORIGEN board as GPIO keys. Signed-off-by: Sachin Kamat Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos4/mach-origen.c | 58 +++++++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+) diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c index cd5195f9354..3d67140aaea 100644 --- a/arch/arm/mach-exynos4/mach-origen.c +++ b/arch/arm/mach-exynos4/mach-origen.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include @@ -97,6 +98,62 @@ static void __init origen_ehci_init(void) s5p_ehci_set_platdata(pdata); } +static struct gpio_keys_button origen_gpio_keys_table[] = { + { + .code = KEY_MENU, + .gpio = EXYNOS4_GPX1(5), + .desc = "gpio-keys: KEY_MENU", + .type = EV_KEY, + .active_low = 1, + .wakeup = 1, + .debounce_interval = 1, + }, { + .code = KEY_HOME, + .gpio = EXYNOS4_GPX1(6), + .desc = "gpio-keys: KEY_HOME", + .type = EV_KEY, + .active_low = 1, + .wakeup = 1, + .debounce_interval = 1, + }, { + .code = KEY_BACK, + .gpio = EXYNOS4_GPX1(7), + .desc = "gpio-keys: KEY_BACK", + .type = EV_KEY, + .active_low = 1, + .wakeup = 1, + .debounce_interval = 1, + }, { + .code = KEY_UP, + .gpio = EXYNOS4_GPX2(0), + .desc = "gpio-keys: KEY_UP", + .type = EV_KEY, + .active_low = 1, + .wakeup = 1, + .debounce_interval = 1, + }, { + .code = KEY_DOWN, + .gpio = EXYNOS4_GPX2(1), + .desc = "gpio-keys: KEY_DOWN", + .type = EV_KEY, + .active_low = 1, + .wakeup = 1, + .debounce_interval = 1, + }, +}; + +static struct gpio_keys_platform_data origen_gpio_keys_data = { + .buttons = origen_gpio_keys_table, + .nbuttons = ARRAY_SIZE(origen_gpio_keys_table), +}; + +static struct platform_device origen_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &origen_gpio_keys_data, + }, +}; + static struct platform_device *origen_devices[] __initdata = { &s3c_device_hsmmc2, &s3c_device_hsmmc0, @@ -107,6 +164,7 @@ static struct platform_device *origen_devices[] __initdata = { &s5p_device_fimc1, &s5p_device_fimc2, &s5p_device_fimc3, + &origen_device_gpiokeys, }; /* LCD Backlight data */ -- cgit v1.2.3-18-g5258 From 6ca3f8bdf8253504426935c97cabb44bdc6f5888 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Sat, 17 Sep 2011 11:42:43 +0900 Subject: ARM: EXYNOS4: Add HDMI support for ORIGEN This patch adds HDMI (TVout) support for ORIGEN board. Signed-off-by: Sachin Kamat Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos4/Kconfig | 2 ++ arch/arm/mach-exynos4/mach-origen.c | 5 +++++ 2 files changed, 7 insertions(+) diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index 00c645426d3..257dbaaf149 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -229,7 +229,9 @@ config MACH_ORIGEN select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 select S5P_DEV_FIMC3 + select S5P_DEV_I2C_HDMIPHY select S5P_DEV_USB_EHCI + select S5P_DEV_TV select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_PWM select EXYNOS4_SETUP_SDHCI diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c index 3d67140aaea..c8121fcf198 100644 --- a/arch/arm/mach-exynos4/mach-origen.c +++ b/arch/arm/mach-exynos4/mach-origen.c @@ -164,6 +164,9 @@ static struct platform_device *origen_devices[] __initdata = { &s5p_device_fimc1, &s5p_device_fimc2, &s5p_device_fimc3, + &s5p_device_hdmi, + &s5p_device_i2c_hdmiphy, + &s5p_device_mixer, &origen_device_gpiokeys, }; @@ -197,6 +200,8 @@ static void __init origen_machine_init(void) origen_ehci_init(); clk_xusbxti.rate = 24000000; + s5p_i2c_hdmiphy_set_platdata(NULL); + platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices)); samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data); -- cgit v1.2.3-18-g5258 From 6e01280f34be02e5e7635debb045aab3705bb5bf Mon Sep 17 00:00:00 2001 From: Inderpal Singh Date: Mon, 3 Oct 2011 08:51:20 +0900 Subject: ARM: EXYNOS4: Configure MAX8997 PMIC for ORIGEN Configure MAX8997 PMIC and provide platform specific data for ORIGEN board. Signed-off-by: Inderpal Singh Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos4/mach-origen.c | 396 +++++++++++++++++++++++++++++++++++- 1 file changed, 392 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c index c8121fcf198..3da77766961 100644 --- a/arch/arm/mach-exynos4/mach-origen.c +++ b/arch/arm/mach-exynos4/mach-origen.c @@ -16,6 +16,9 @@ #include #include #include +#include +#include +#include #include #include @@ -78,6 +81,378 @@ static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = { }, }; +static struct regulator_consumer_supply __initdata ldo3_consumer[] = { + REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), /* MIPI */ +}; +static struct regulator_consumer_supply __initdata ldo6_consumer[] = { + REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"), /* MIPI */ +}; +static struct regulator_consumer_supply __initdata ldo7_consumer[] = { + REGULATOR_SUPPLY("avdd", "alc5625"), /* Realtek ALC5625 */ +}; +static struct regulator_consumer_supply __initdata ldo8_consumer[] = { + REGULATOR_SUPPLY("vdd", "s5p-adc"), /* ADC */ +}; +static struct regulator_consumer_supply __initdata ldo9_consumer[] = { + REGULATOR_SUPPLY("dvdd", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */ +}; +static struct regulator_consumer_supply __initdata ldo11_consumer[] = { + REGULATOR_SUPPLY("dvdd", "alc5625"), /* Realtek ALC5625 */ +}; +static struct regulator_consumer_supply __initdata ldo14_consumer[] = { + REGULATOR_SUPPLY("avdd18", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */ +}; +static struct regulator_consumer_supply __initdata ldo17_consumer[] = { + REGULATOR_SUPPLY("vdd33", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */ +}; +static struct regulator_consumer_supply __initdata buck1_consumer[] = { + REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */ +}; +static struct regulator_consumer_supply __initdata buck2_consumer[] = { + REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */ +}; +static struct regulator_consumer_supply __initdata buck3_consumer[] = { + REGULATOR_SUPPLY("vdd_g3d", "mali_drm"), /* G3D */ +}; +static struct regulator_consumer_supply __initdata buck7_consumer[] = { + REGULATOR_SUPPLY("vcc", "platform-lcd"), /* LCD */ +}; + +static struct regulator_init_data __initdata max8997_ldo1_data = { + .constraints = { + .name = "VDD_ABB_3.3V", + .min_uV = 3300000, + .max_uV = 3300000, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_ldo2_data = { + .constraints = { + .name = "VDD_ALIVE_1.1V", + .min_uV = 1100000, + .max_uV = 1100000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_ldo3_data = { + .constraints = { + .name = "VMIPI_1.1V", + .min_uV = 1100000, + .max_uV = 1100000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(ldo3_consumer), + .consumer_supplies = ldo3_consumer, +}; + +static struct regulator_init_data __initdata max8997_ldo4_data = { + .constraints = { + .name = "VDD_RTC_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_ldo6_data = { + .constraints = { + .name = "VMIPI_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(ldo6_consumer), + .consumer_supplies = ldo6_consumer, +}; + +static struct regulator_init_data __initdata max8997_ldo7_data = { + .constraints = { + .name = "VDD_AUD_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(ldo7_consumer), + .consumer_supplies = ldo7_consumer, +}; + +static struct regulator_init_data __initdata max8997_ldo8_data = { + .constraints = { + .name = "VADC_3.3V", + .min_uV = 3300000, + .max_uV = 3300000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(ldo8_consumer), + .consumer_supplies = ldo8_consumer, +}; + +static struct regulator_init_data __initdata max8997_ldo9_data = { + .constraints = { + .name = "DVDD_SWB_2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(ldo9_consumer), + .consumer_supplies = ldo9_consumer, +}; + +static struct regulator_init_data __initdata max8997_ldo10_data = { + .constraints = { + .name = "VDD_PLL_1.1V", + .min_uV = 1100000, + .max_uV = 1100000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_ldo11_data = { + .constraints = { + .name = "VDD_AUD_3V", + .min_uV = 3000000, + .max_uV = 3000000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(ldo11_consumer), + .consumer_supplies = ldo11_consumer, +}; + +static struct regulator_init_data __initdata max8997_ldo14_data = { + .constraints = { + .name = "AVDD18_SWB_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(ldo14_consumer), + .consumer_supplies = ldo14_consumer, +}; + +static struct regulator_init_data __initdata max8997_ldo17_data = { + .constraints = { + .name = "VDD_SWB_3.3V", + .min_uV = 3300000, + .max_uV = 3300000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(ldo17_consumer), + .consumer_supplies = ldo17_consumer, +}; + +static struct regulator_init_data __initdata max8997_ldo21_data = { + .constraints = { + .name = "VDD_MIF_1.2V", + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_buck1_data = { + .constraints = { + .name = "VDD_ARM_1.2V", + .min_uV = 950000, + .max_uV = 1350000, + .always_on = 1, + .boot_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(buck1_consumer), + .consumer_supplies = buck1_consumer, +}; + +static struct regulator_init_data __initdata max8997_buck2_data = { + .constraints = { + .name = "VDD_INT_1.1V", + .min_uV = 900000, + .max_uV = 1100000, + .always_on = 1, + .boot_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(buck2_consumer), + .consumer_supplies = buck2_consumer, +}; + +static struct regulator_init_data __initdata max8997_buck3_data = { + .constraints = { + .name = "VDD_G3D_1.1V", + .min_uV = 900000, + .max_uV = 1100000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(buck3_consumer), + .consumer_supplies = buck3_consumer, +}; + +static struct regulator_init_data __initdata max8997_buck5_data = { + .constraints = { + .name = "VDDQ_M1M2_1.2V", + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_buck7_data = { + .constraints = { + .name = "VDD_LCD_3.3V", + .min_uV = 3300000, + .max_uV = 3300000, + .boot_on = 1, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1 + }, + }, + .num_consumer_supplies = ARRAY_SIZE(buck7_consumer), + .consumer_supplies = buck7_consumer, +}; + +static struct max8997_regulator_data __initdata origen_max8997_regulators[] = { + { MAX8997_LDO1, &max8997_ldo1_data }, + { MAX8997_LDO2, &max8997_ldo2_data }, + { MAX8997_LDO3, &max8997_ldo3_data }, + { MAX8997_LDO4, &max8997_ldo4_data }, + { MAX8997_LDO6, &max8997_ldo6_data }, + { MAX8997_LDO7, &max8997_ldo7_data }, + { MAX8997_LDO8, &max8997_ldo8_data }, + { MAX8997_LDO9, &max8997_ldo9_data }, + { MAX8997_LDO10, &max8997_ldo10_data }, + { MAX8997_LDO11, &max8997_ldo11_data }, + { MAX8997_LDO14, &max8997_ldo14_data }, + { MAX8997_LDO17, &max8997_ldo17_data }, + { MAX8997_LDO21, &max8997_ldo21_data }, + { MAX8997_BUCK1, &max8997_buck1_data }, + { MAX8997_BUCK2, &max8997_buck2_data }, + { MAX8997_BUCK3, &max8997_buck3_data }, + { MAX8997_BUCK5, &max8997_buck5_data }, + { MAX8997_BUCK7, &max8997_buck7_data }, +}; + +struct max8997_platform_data __initdata origen_max8997_pdata = { + .num_regulators = ARRAY_SIZE(origen_max8997_regulators), + .regulators = origen_max8997_regulators, + + .wakeup = true, + .buck1_gpiodvs = false, + .buck2_gpiodvs = false, + .buck5_gpiodvs = false, + .irq_base = IRQ_GPIO_END + 1, + + .ignore_gpiodvs_side_effect = true, + .buck125_default_idx = 0x0, + + .buck125_gpios[0] = EXYNOS4_GPX0(0), + .buck125_gpios[1] = EXYNOS4_GPX0(1), + .buck125_gpios[2] = EXYNOS4_GPX0(2), + + .buck1_voltage[0] = 1350000, + .buck1_voltage[1] = 1300000, + .buck1_voltage[2] = 1250000, + .buck1_voltage[3] = 1200000, + .buck1_voltage[4] = 1150000, + .buck1_voltage[5] = 1100000, + .buck1_voltage[6] = 1000000, + .buck1_voltage[7] = 950000, + + .buck2_voltage[0] = 1100000, + .buck2_voltage[1] = 1100000, + .buck2_voltage[2] = 1100000, + .buck2_voltage[3] = 1100000, + .buck2_voltage[4] = 1000000, + .buck2_voltage[5] = 1000000, + .buck2_voltage[6] = 1000000, + .buck2_voltage[7] = 1000000, + + .buck5_voltage[0] = 1200000, + .buck5_voltage[1] = 1200000, + .buck5_voltage[2] = 1200000, + .buck5_voltage[3] = 1200000, + .buck5_voltage[4] = 1200000, + .buck5_voltage[5] = 1200000, + .buck5_voltage[6] = 1200000, + .buck5_voltage[7] = 1200000, +}; + +/* I2C0 */ +static struct i2c_board_info i2c0_devs[] __initdata = { + { + I2C_BOARD_INFO("max8997", (0xCC >> 1)), + .platform_data = &origen_max8997_pdata, + .irq = IRQ_EINT(4), + }, +}; + static struct s3c_sdhci_platdata origen_hsmmc0_pdata __initdata = { .cd_type = S3C_SDHCI_CD_INTERNAL, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, @@ -155,6 +530,7 @@ static struct platform_device origen_device_gpiokeys = { }; static struct platform_device *origen_devices[] __initdata = { + &s3c_device_i2c0, &s3c_device_hsmmc2, &s3c_device_hsmmc0, &s3c_device_rtc, @@ -172,13 +548,13 @@ static struct platform_device *origen_devices[] __initdata = { /* LCD Backlight data */ static struct samsung_bl_gpio_info origen_bl_gpio_info = { - .no = EXYNOS4_GPD0(0), - .func = S3C_GPIO_SFN(2), + .no = EXYNOS4_GPD0(0), + .func = S3C_GPIO_SFN(2), }; static struct platform_pwm_backlight_data origen_bl_data = { - .pwm_id = 0, - .pwm_period_ns = 1000, + .pwm_id = 0, + .pwm_period_ns = 1000, }; static void __init origen_map_io(void) @@ -188,8 +564,20 @@ static void __init origen_map_io(void) s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs)); } +static void __init origen_power_init(void) +{ + gpio_request(EXYNOS4_GPX0(4), "PMIC_IRQ"); + s3c_gpio_cfgpin(EXYNOS4_GPX0(4), S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(EXYNOS4_GPX0(4), S3C_GPIO_PULL_NONE); +} + static void __init origen_machine_init(void) { + origen_power_init(); + + s3c_i2c0_set_platdata(NULL); + i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs)); + /* * Since sdhci instance 2 can contain a bootable media, * sdhci instance 0 is registered after instance 2. -- cgit v1.2.3-18-g5258 From 9421a76d2bfec62b89b395033d03eea44bb2a4ac Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Mon, 3 Oct 2011 09:12:56 +0900 Subject: ARM: EXYNOS4: Add machine support for 7" LCD on ORIGEN ORIGEN board is fitted with 7" LCD panel HV070WSA. The pixel resolution of the LCD panel is 1024x600. Also power domain device for LCD0 is registered. Signed-off-by: Tushar Behera Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos4/Kconfig | 5 ++- arch/arm/mach-exynos4/mach-origen.c | 63 ++++++++++++++++++++++++++++++++++++- 2 files changed, 66 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index 257dbaaf149..6fc17228a63 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -229,11 +229,14 @@ config MACH_ORIGEN select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 select S5P_DEV_FIMC3 + select S5P_DEV_FIMD0 select S5P_DEV_I2C_HDMIPHY - select S5P_DEV_USB_EHCI select S5P_DEV_TV + select S5P_DEV_USB_EHCI + select EXYNOS4_DEV_PD select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_PWM + select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY help diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c index 3da77766961..349e2977b2e 100644 --- a/arch/arm/mach-exynos4/mach-origen.c +++ b/arch/arm/mach-exynos4/mach-origen.c @@ -19,11 +19,15 @@ #include #include #include +#include #include #include +#include