From 78961a5740374a8143f8fe120300f2ed160dd276 Mon Sep 17 00:00:00 2001 From: Kaiwan N Billimoria Date: Tue, 17 Jul 2007 04:04:05 -0700 Subject: spi_lm70llp parport adapter driver This adds a driver for the LM70-LLP parport adapter, which is an eval board for the LM70 temperature sensor. For those without that board, it may be a simpler example of a parport-to-SPI adapter then spi_butterfly. Signed-off-by: Kaiwan N Billimoria Doc, coding style, and interface updates; build fixes. Minor rename. Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/spi/spi-lm70llp | 69 ++++++++ drivers/spi/Kconfig | 9 ++ drivers/spi/Makefile | 1 + drivers/spi/spi_lm70llp.c | 361 ++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 440 insertions(+) create mode 100644 Documentation/spi/spi-lm70llp create mode 100644 drivers/spi/spi_lm70llp.c diff --git a/Documentation/spi/spi-lm70llp b/Documentation/spi/spi-lm70llp new file mode 100644 index 00000000000..154bd02220b --- /dev/null +++ b/Documentation/spi/spi-lm70llp @@ -0,0 +1,69 @@ +spi_lm70llp : LM70-LLP parport-to-SPI adapter +============================================== + +Supported board/chip: + * National Semiconductor LM70 LLP evaluation board + Datasheet: http://www.national.com/pf/LM/LM70.html + +Author: + Kaiwan N Billimoria + +Description +----------- +This driver provides glue code connecting a National Semiconductor LM70 LLP +temperature sensor evaluation board to the kernel's SPI core subsystem. + +In effect, this driver turns the parallel port interface on the eval board +into a SPI bus with a single device, which will be driven by the generic +LM70 driver (drivers/hwmon/lm70.c). + +The hardware interfacing on the LM70 LLP eval board is as follows: + + Parallel LM70 LLP + Port Direction JP2 Header + ----------- --------- ---------------- + D0 2 - - + D1 3 --> V+ 5 + D2 4 --> V+ 5 + D3 5 --> V+ 5 + D4 6 --> V+ 5 + D5 7 --> nCS 8 + D6 8 --> SCLK 3 + D7 9 --> SI/O 5 + GND 25 - GND 7 + Select 13 <-- SI/O 1 + ----------- --------- ---------------- + +Note that since the LM70 uses a "3-wire" variant of SPI, the SI/SO pin +is connected to both pin D7 (as Master Out) and Select (as Master In) +using an arrangment that lets either the parport or the LM70 pull the +pin low. This can't be shared with true SPI devices, but other 3-wire +devices might share the same SI/SO pin. + +The bitbanger routine in this driver (lm70_txrx) is called back from +the bound "hwmon/lm70" protocol driver through its sysfs hook, using a +spi_write_then_read() call. It performs Mode 0 (SPI/Microwire) bitbanging. +The lm70 driver then inteprets the resulting digital temperature value +and exports it through sysfs. + +A "gotcha": National Semiconductor's LM70 LLP eval board circuit schematic +shows that the SI/O line from the LM70 chip is connected to the base of a +transistor Q1 (and also a pullup, and a zener diode to D7); while the +collector is tied to VCC. + +Interpreting this circuit, when the LM70 SI/O line is High (or tristate +and not grounded by the host via D7), the transistor conducts and switches +the collector to zero, which is reflected on pin 13 of the DB25 parport +connector. When SI/O is Low (driven by the LM70 or the host) on the other +hand, the transistor is cut off and the voltage tied to it's collector is +reflected on pin 13 as a High level. + +So: the getmiso inline routine in this driver takes this fact into account, +inverting the value read at pin 13. + + +Thanks to +--------- +o David Brownell for mentoring the SPI-side driver development. +o Dr.Craig Hollabaugh for the (early) "manual" bitbanging driver version. +o Nadir Billimoria for help interpreting the circuit schematic. diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 5e3f748f269..488b341d2af 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -107,6 +107,15 @@ config SPI_IMX This enables using the Freescale iMX SPI controller in master mode. +config SPI_LM70_LLP + tristate "Parallel port adapter for LM70 eval board (DEVELOPMENT)" + depends on SPI_MASTER && PARPORT && EXPERIMENTAL + select SPI_BITBANG + help + This driver supports the NS LM70 LLP Evaluation Board, + which interfaces to an LM70 temperature sensor using + a parallel port. + config SPI_MPC52xx_PSC tristate "Freescale MPC52xx PSC SPI controller" depends on SPI_MASTER && PPC_MPC52xx && EXPERIMENTAL diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 5788d867de8..89293338f20 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o obj-$(CONFIG_SPI_AU1550) += au1550_spi.o obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o obj-$(CONFIG_SPI_IMX) += spi_imx.o +obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52xx_psc_spi.o diff --git a/drivers/spi/spi_lm70llp.c b/drivers/spi/spi_lm70llp.c new file mode 100644 index 00000000000..4ea68ac1611 --- /dev/null +++ b/drivers/spi/spi_lm70llp.c @@ -0,0 +1,361 @@ +/* + * spi_lm70llp.c - driver for lm70llp eval board for the LM70 sensor + * + * Copyright (C) 2006 Kaiwan N Billimoria + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + + +#include +#include + + +/* + * The LM70 communicates with a host processor using a 3-wire variant of + * the SPI/Microwire bus interface. This driver specifically supports an + * NS LM70 LLP Evaluation Board, interfacing to a PC using its parallel + * port to bitbang an SPI-parport bridge. Accordingly, this is an SPI + * master controller driver. The hwmon/lm70 driver is a "SPI protocol + * driver", layered on top of this one and usable without the lm70llp. + * + * The LM70 is a temperature sensor chip from National Semiconductor; its + * datasheet is available at http://www.national.com/pf/LM/LM70.html + * + * Also see Documentation/spi/spi-lm70llp. The SPI<->parport code here is + * (heavily) based on spi-butterfly by David Brownell. + * + * The LM70 LLP connects to the PC parallel port in the following manner: + * + * Parallel LM70 LLP + * Port Direction JP2 Header + * ----------- --------- ------------ + * D0 2 - - + * D1 3 --> V+ 5 + * D2 4 --> V+ 5 + * D3 5 --> V+ 5 + * D4 6 --> V+ 5 + * D5 7 --> nCS 8 + * D6 8 --> SCLK 3 + * D7 9 --> SI/O 5 + * GND 25 - GND 7 + * Select 13 <-- SI/O 1 + * + * Note that parport pin 13 actually gets inverted by the transistor + * arrangement which lets either the parport or the LM70 drive the + * SI/SO signal. + */ + +#define DRVNAME "spi-lm70llp" + +#define lm70_INIT 0xBE +#define SIO 0x10 +#define nCS 0x20 +#define SCLK 0x40 + +/*-------------------------------------------------------------------------*/ + +struct spi_lm70llp { + struct spi_bitbang bitbang; + struct parport *port; + struct pardevice *pd; + struct spi_device *spidev_lm70; + struct spi_board_info info; + struct class_device *cdev; +}; + +/* REVISIT : ugly global ; provides "exclusive open" facility */ +static struct spi_lm70llp *lm70llp; + + +/*-------------------------------------------------------------------*/ + +static inline struct spi_lm70llp *spidev_to_pp(struct spi_device *spi) +{ + return spi->controller_data; +} + +/*---------------------- LM70 LLP eval board-specific inlines follow */ + +/* NOTE: we don't actually need to reread the output values, since they'll + * still be what we wrote before. Plus, going through parport builds in + * a ~1ms/operation delay; these SPI transfers could easily be faster. + */ + +static inline void deassertCS(struct spi_lm70llp *pp) +{ + u8 data = parport_read_data(pp->port); + parport_write_data(pp->port, data | nCS); +} + +static inline void assertCS(struct spi_lm70llp *pp) +{ + u8 data = parport_read_data(pp->port); + parport_write_data(pp->port, data & ~nCS); +} + +static inline void clkHigh(struct spi_lm70llp *pp) +{ + u8 data = parport_read_data(pp->port); + parport_write_data(pp->port, data | SCLK); +} + +static inline void clkLow(struct spi_lm70llp *pp) +{ + u8 data = parport_read_data(pp->port); + parport_write_data(pp->port, data & ~SCLK); +} + +/*------------------------- SPI-LM70-specific inlines ----------------------*/ + +static inline void spidelay(unsigned d) +{ + udelay(d); +} + +static inline void setsck(struct spi_device *s, int is_on) +{ + struct spi_lm70llp *pp = spidev_to_pp(s); + + if (is_on) + clkHigh(pp); + else + clkLow(pp); +} + +static inline void setmosi(struct spi_device *s, int is_on) +{ + /* FIXME update D7 ... this way we can put the chip + * into shutdown mode and read the manufacturer ID, + * but we can't put it back into operational mode. + */ +} + +/* + * getmiso: + * Why do we return 0 when the SIO line is high and vice-versa? + * The fact is, the lm70 eval board from NS (which this driver drives), + * is wired in just such a way : when the lm70's SIO goes high, a transistor + * switches it to low reflecting this on the parport (pin 13), and vice-versa. + */ +static inline int getmiso(struct spi_device *s) +{ + struct spi_lm70llp *pp = spidev_to_pp(s); + return ((SIO == (parport_read_status(pp->port) & SIO)) ? 0 : 1 ); +} +/*--------------------------------------------------------------------*/ + +#define EXPAND_BITBANG_TXRX 1 +#include + +static void lm70_chipselect(struct spi_device *spi, int value) +{ + struct spi_lm70llp *pp = spidev_to_pp(spi); + + if (value) + assertCS(pp); + else + deassertCS(pp); +} + +/* + * Our actual bitbanger routine. + */ +static u32 lm70_txrx(struct spi_device *spi, unsigned nsecs, u32 word, u8 bits) +{ + static u32 sio=0; + static int first_time=1; + + /* First time: perform SPI bitbang and return the LSB of + * the result of the SPI call. + */ + if (first_time) { + sio = bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits); + first_time=0; + return (sio & 0x00ff); + } + /* Return the MSB of the result of the SPI call */ + else { + first_time=1; + return (sio >> 8); + } +} + +static void spi_lm70llp_attach(struct parport *p) +{ + struct pardevice *pd; + struct spi_lm70llp *pp; + struct spi_master *master; + int status; + + if (lm70llp) { + printk(KERN_WARNING + "%s: spi_lm70llp instance already loaded. Aborting.\n", + DRVNAME); + return; + } + + /* TODO: this just _assumes_ a lm70 is there ... no probe; + * the lm70 driver could verify it, reading the manf ID. + */ + + master = spi_alloc_master(p->physport->dev, sizeof *pp); + if (!master) { + status = -ENOMEM; + goto out_fail; + } + pp = spi_master_get_devdata(master); + + master->bus_num = -1; /* dynamic alloc of a bus number */ + master->num_chipselect = 1; + + /* + * SPI and bitbang hookup. + */ + pp->bitbang.master = spi_master_get(master); + pp->bitbang.chipselect = lm70_chipselect; + pp->bitbang.txrx_word[SPI_MODE_0] = lm70_txrx; + pp->bitbang.flags = SPI_3WIRE; + + /* + * Parport hookup + */ + pp->port = p; + pd = parport_register_device(p, DRVNAME, + NULL, NULL, NULL, + PARPORT_FLAG_EXCL, pp); + if (!pd) { + status = -ENOMEM; + goto out_free_master; + } + pp->pd = pd; + + status = parport_claim(pd); + if (status < 0) + goto out_parport_unreg; + + /* + * Start SPI ... + */ + status = spi_bitbang_start(&pp->bitbang); + if (status < 0) { + printk(KERN_WARNING + "%s: spi_bitbang_start failed with status %d\n", + DRVNAME, status); + goto out_off_and_release; + } + + /* + * The modalias name MUST match the device_driver name + * for the bus glue code to match and subsequently bind them. + * We are binding to the generic drivers/hwmon/lm70.c device + * driver. + */ + strcpy(pp->info.modalias, "lm70"); + pp->info.max_speed_hz = 6 * 1000 * 1000; + pp->info.chip_select = 0; + pp->info.mode = SPI_3WIRE | SPI_MODE_0; + + /* power up the chip, and let the LM70 control SI/SO */ + parport_write_data(pp->port, lm70_INIT); + + /* Enable access to our primary data structure via + * the board info's (void *)controller_data. + */ + pp->info.controller_data = pp; + pp->spidev_lm70 = spi_new_device(pp->bitbang.master, &pp->info); + if (pp->spidev_lm70) + dev_dbg(&pp->spidev_lm70->dev, "spidev_lm70 at %s\n", + pp->spidev_lm70->dev.bus_id); + else { + printk(KERN_WARNING "%s: spi_new_device failed\n", DRVNAME); + status = -ENODEV; + goto out_bitbang_stop; + } + pp->spidev_lm70->bits_per_word = 16; + + lm70llp = pp; + + return; + +out_bitbang_stop: + spi_bitbang_stop(&pp->bitbang); +out_off_and_release: + /* power down */ + parport_write_data(pp->port, 0); + mdelay(10); + parport_release(pp->pd); +out_parport_unreg: + parport_unregister_device(pd); +out_free_master: + (void) spi_master_put(master); +out_fail: + pr_info("%s: spi_lm70llp probe fail, status %d\n", DRVNAME, status); +} + +static void spi_lm70llp_detach(struct parport *p) +{ + struct spi_lm70llp *pp; + + if (!lm70llp || lm70llp->port != p) + return; + + pp = lm70llp; + spi_bitbang_stop(&pp->bitbang); + + /* power down */ + parport_write_data(pp->port, 0); + msleep(10); + + parport_release(pp->pd); + parport_unregister_device(pp->pd); + + (void) spi_master_put(pp->bitbang.master); + + lm70llp = NULL; +} + + +static struct parport_driver spi_lm70llp_drv = { + .name = DRVNAME, + .attach = spi_lm70llp_attach, + .detach = spi_lm70llp_detach, +}; + +static int __init init_spi_lm70llp(void) +{ + return parport_register_driver(&spi_lm70llp_drv); +} +module_init(init_spi_lm70llp); + +static void __exit cleanup_spi_lm70llp(void) +{ + parport_unregister_driver(&spi_lm70llp_drv); +} +module_exit(cleanup_spi_lm70llp); + +MODULE_AUTHOR("Kaiwan N Billimoria "); +MODULE_DESCRIPTION( + "Parport adapter for the National Semiconductor LM70 LLP eval board"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3-18-g5258