From 7639a4541f7e7abb1295ff8ab39cc2f5842239ae Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 20 Oct 2008 13:02:48 +0900
Subject: sh: Migrate common board headers to mach-common/.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
arch/sh/Makefile | 3 +
arch/sh/boards/board-magicpanelr2.c | 2 +-
arch/sh/boards/board-sh7785lcr.c | 2 +-
arch/sh/boards/board-shmin.c | 2 +-
arch/sh/boards/mach-edosk7705/io.c | 2 +-
arch/sh/boards/mach-edosk7705/setup.c | 2 +-
arch/sh/boards/mach-highlander/irq-r7780mp.c | 2 +-
arch/sh/boards/mach-highlander/irq-r7780rp.c | 2 +-
arch/sh/boards/mach-highlander/irq-r7785rp.c | 2 +-
arch/sh/boards/mach-highlander/psw.c | 2 +-
arch/sh/boards/mach-highlander/setup.c | 2 +-
arch/sh/boards/mach-hp6xx/hp6xx_apm.c | 2 +-
arch/sh/boards/mach-hp6xx/pm.c | 2 +-
arch/sh/boards/mach-hp6xx/setup.c | 2 +-
arch/sh/boards/mach-lboxre2/irq.c | 2 +-
arch/sh/boards/mach-lboxre2/setup.c | 2 +-
arch/sh/boards/mach-microdev/io.c | 2 +-
arch/sh/boards/mach-microdev/irq.c | 2 +-
arch/sh/boards/mach-microdev/setup.c | 2 +-
arch/sh/boards/mach-migor/lcd_qvga.c | 2 +-
arch/sh/boards/mach-migor/setup.c | 2 +-
arch/sh/boards/mach-r2d/irq.c | 2 +-
arch/sh/boards/mach-r2d/setup.c | 2 +-
arch/sh/boards/mach-sdk7780/irq.c | 2 +-
arch/sh/boards/mach-sdk7780/setup.c | 2 +-
arch/sh/boards/mach-sh7763rdp/irq.c | 2 +-
arch/sh/boards/mach-sh7763rdp/setup.c | 2 +-
arch/sh/boards/mach-snapgear/setup.c | 2 +-
arch/sh/boards/mach-systemh/io.c | 2 +-
arch/sh/boards/mach-systemh/irq.c | 2 +-
arch/sh/boards/mach-systemh/setup.c | 2 +-
arch/sh/boards/mach-titan/io.c | 2 +-
arch/sh/boards/mach-titan/setup.c | 2 +-
arch/sh/drivers/pci/ops-lboxre2.c | 2 +-
arch/sh/drivers/pci/ops-r7780rp.c | 2 +-
arch/sh/drivers/pci/ops-rts7751r2d.c | 2 +-
arch/sh/drivers/pci/ops-sdk7780.c | 2 +-
arch/sh/drivers/pci/ops-titan.c | 2 +-
arch/sh/include/asm/edosk7705.h | 30 ----
arch/sh/include/asm/hp6xx.h | 58 -------
arch/sh/include/asm/lboxre2.h | 27 ----
arch/sh/include/asm/magicpanelr2.h | 67 --------
arch/sh/include/asm/microdev.h | 80 ----------
arch/sh/include/asm/migor.h | 64 --------
arch/sh/include/asm/r7780rp.h | 198 ------------------------
arch/sh/include/asm/rts7751r2d.h | 70 ---------
arch/sh/include/asm/sdk7780.h | 81 ----------
arch/sh/include/asm/sh7763rdp.h | 54 -------
arch/sh/include/asm/sh7785lcr.h | 55 -------
arch/sh/include/asm/shmin.h | 9 --
arch/sh/include/asm/snapgear.h | 71 ---------
arch/sh/include/asm/systemh7751.h | 71 ---------
arch/sh/include/asm/titan.h | 17 --
arch/sh/include/mach-common/mach/edosk7705.h | 30 ++++
arch/sh/include/mach-common/mach/highlander.h | 198 ++++++++++++++++++++++++
arch/sh/include/mach-common/mach/hp6xx.h | 58 +++++++
arch/sh/include/mach-common/mach/lboxre2.h | 27 ++++
arch/sh/include/mach-common/mach/magicpanelr2.h | 67 ++++++++
arch/sh/include/mach-common/mach/microdev.h | 80 ++++++++++
arch/sh/include/mach-common/mach/migor.h | 64 ++++++++
arch/sh/include/mach-common/mach/r2d.h | 70 +++++++++
arch/sh/include/mach-common/mach/sdk7780.h | 81 ++++++++++
arch/sh/include/mach-common/mach/sh7763rdp.h | 54 +++++++
arch/sh/include/mach-common/mach/sh7785lcr.h | 55 +++++++
arch/sh/include/mach-common/mach/shmin.h | 9 ++
arch/sh/include/mach-common/mach/snapgear.h | 71 +++++++++
arch/sh/include/mach-common/mach/systemh7751.h | 71 +++++++++
arch/sh/include/mach-common/mach/titan.h | 17 ++
drivers/input/touchscreen/hp680_ts_input.c | 2 +-
drivers/leds/leds-hp6xx.c | 2 +-
drivers/rtc/rtc-ds1302.c | 2 +-
drivers/video/backlight/hp680_bl.c | 2 +-
sound/oss/sh_dac_audio.c | 2 +-
73 files changed, 997 insertions(+), 994 deletions(-)
delete mode 100644 arch/sh/include/asm/edosk7705.h
delete mode 100644 arch/sh/include/asm/hp6xx.h
delete mode 100644 arch/sh/include/asm/lboxre2.h
delete mode 100644 arch/sh/include/asm/magicpanelr2.h
delete mode 100644 arch/sh/include/asm/microdev.h
delete mode 100644 arch/sh/include/asm/migor.h
delete mode 100644 arch/sh/include/asm/r7780rp.h
delete mode 100644 arch/sh/include/asm/rts7751r2d.h
delete mode 100644 arch/sh/include/asm/sdk7780.h
delete mode 100644 arch/sh/include/asm/sh7763rdp.h
delete mode 100644 arch/sh/include/asm/sh7785lcr.h
delete mode 100644 arch/sh/include/asm/shmin.h
delete mode 100644 arch/sh/include/asm/snapgear.h
delete mode 100644 arch/sh/include/asm/systemh7751.h
delete mode 100644 arch/sh/include/asm/titan.h
create mode 100644 arch/sh/include/mach-common/mach/edosk7705.h
create mode 100644 arch/sh/include/mach-common/mach/highlander.h
create mode 100644 arch/sh/include/mach-common/mach/hp6xx.h
create mode 100644 arch/sh/include/mach-common/mach/lboxre2.h
create mode 100644 arch/sh/include/mach-common/mach/magicpanelr2.h
create mode 100644 arch/sh/include/mach-common/mach/microdev.h
create mode 100644 arch/sh/include/mach-common/mach/migor.h
create mode 100644 arch/sh/include/mach-common/mach/r2d.h
create mode 100644 arch/sh/include/mach-common/mach/sdk7780.h
create mode 100644 arch/sh/include/mach-common/mach/sh7763rdp.h
create mode 100644 arch/sh/include/mach-common/mach/sh7785lcr.h
create mode 100644 arch/sh/include/mach-common/mach/shmin.h
create mode 100644 arch/sh/include/mach-common/mach/snapgear.h
create mode 100644 arch/sh/include/mach-common/mach/systemh7751.h
create mode 100644 arch/sh/include/mach-common/mach/titan.h
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 0bc956012c3..1f409bf8180 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -125,6 +125,9 @@ core-y += $(addprefix arch/sh/boards/, \
$(filter-out ., $(patsubst %,%/,$(machdir-y))))
endif
+# Common machine type headers. Not part of the arch/sh/boards/ hierarchy.
+machdir-y += mach-common
+
# Companion chips
core-$(CONFIG_HD6446X_SERIES) += arch/sh/cchips/hd6446x/
diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c
index da6bff83a6e..3de22ccdeb7 100644
--- a/arch/sh/boards/board-magicpanelr2.c
+++ b/arch/sh/boards/board-magicpanelr2.c
@@ -18,7 +18,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/map.h>
-#include <asm/magicpanelr2.h>
+#include <mach/magicpanelr2.h>
#include <asm/heartbeat.h>
#include <cpu/sh7720.h>
diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c
index b95d674ee70..408bbddaf32 100644
--- a/arch/sh/boards/board-sh7785lcr.c
+++ b/arch/sh/boards/board-sh7785lcr.c
@@ -19,7 +19,7 @@
#include <linux/i2c-pca-platform.h>
#include <linux/i2c-algo-pca.h>
#include <asm/heartbeat.h>
-#include <asm/sh7785lcr.h>
+#include <mach/sh7785lcr.h>
/*
* NOTE: This board has 2 physical memory maps.
diff --git a/arch/sh/boards/board-shmin.c b/arch/sh/boards/board-shmin.c
index 16e5dae8ecf..5cc0867de5a 100644
--- a/arch/sh/boards/board-shmin.c
+++ b/arch/sh/boards/board-shmin.c
@@ -8,7 +8,7 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <asm/machvec.h>
-#include <asm/shmin.h>
+#include <mach/shmin.h>
#include <asm/clock.h>
#include <asm/io.h>
diff --git a/arch/sh/boards/mach-edosk7705/io.c b/arch/sh/boards/mach-edosk7705/io.c
index 541cea2a652..7d153e50a01 100644
--- a/arch/sh/boards/mach-edosk7705/io.c
+++ b/arch/sh/boards/mach-edosk7705/io.c
@@ -11,7 +11,7 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <asm/io.h>
-#include <asm/edosk7705/io.h>
+#include <mach/edosk7705.h>
#include <asm/addrspace.h>
#define SMC_IOADDR 0xA2000000
diff --git a/arch/sh/boards/mach-edosk7705/setup.c b/arch/sh/boards/mach-edosk7705/setup.c
index f076c45308d..ab3f47bffdf 100644
--- a/arch/sh/boards/mach-edosk7705/setup.c
+++ b/arch/sh/boards/mach-edosk7705/setup.c
@@ -10,7 +10,7 @@
*/
#include <linux/init.h>
#include <asm/machvec.h>
-#include <asm/edosk7705/io.h>
+#include <mach/edosk7705.h>
static void __init sh_edosk7705_init_irq(void)
{
diff --git a/arch/sh/boards/mach-highlander/irq-r7780mp.c b/arch/sh/boards/mach-highlander/irq-r7780mp.c
index ae1cfcb2970..83c28bcd4d2 100644
--- a/arch/sh/boards/mach-highlander/irq-r7780mp.c
+++ b/arch/sh/boards/mach-highlander/irq-r7780mp.c
@@ -12,7 +12,7 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
-#include <asm/r7780rp.h>
+#include <mach/highlander.h>
enum {
UNUSED = 0,
diff --git a/arch/sh/boards/mach-highlander/irq-r7780rp.c b/arch/sh/boards/mach-highlander/irq-r7780rp.c
index 9d3921fe27c..b721e86b5af 100644
--- a/arch/sh/boards/mach-highlander/irq-r7780rp.c
+++ b/arch/sh/boards/mach-highlander/irq-r7780rp.c
@@ -12,7 +12,7 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
-#include <asm/r7780rp.h>
+#include <mach/highlander.h>
enum {
UNUSED = 0,
diff --git a/arch/sh/boards/mach-highlander/irq-r7785rp.c b/arch/sh/boards/mach-highlander/irq-r7785rp.c
index 896c045aa39..3811b060a39 100644
--- a/arch/sh/boards/mach-highlander/irq-r7785rp.c
+++ b/arch/sh/boards/mach-highlander/irq-r7785rp.c
@@ -12,7 +12,7 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
-#include <asm/r7780rp.h>
+#include <mach/highlander.h>
enum {
UNUSED = 0,
diff --git a/arch/sh/boards/mach-highlander/psw.c b/arch/sh/boards/mach-highlander/psw.c
index be8d5477fc6..37b1a2ee71a 100644
--- a/arch/sh/boards/mach-highlander/psw.c
+++ b/arch/sh/boards/mach-highlander/psw.c
@@ -13,7 +13,7 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
-#include <asm/r7780rp.h>
+#include <mach/highlander.h>
#include <asm/push-switch.h>
static irqreturn_t psw_irq_handler(int irq, void *arg)
diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c
index bc79afb6fc4..c5a40f7906d 100644
--- a/arch/sh/boards/mach-highlander/setup.c
+++ b/arch/sh/boards/mach-highlander/setup.c
@@ -20,7 +20,7 @@
#include <linux/i2c.h>
#include <net/ax88796.h>
#include <asm/machvec.h>
-#include <asm/r7780rp.h>
+#include <mach/highlander.h>
#include <asm/clock.h>
#include <asm/heartbeat.h>
#include <asm/io.h>
diff --git a/arch/sh/boards/mach-hp6xx/hp6xx_apm.c b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
index 177f4f028e0..e85212faf40 100644
--- a/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
+++ b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
@@ -14,7 +14,7 @@
#include <linux/apm-emulation.h>
#include <linux/io.h>
#include <asm/adc.h>
-#include <asm/hp6xx.h>
+#include <mach/hp6xx.h>
/* percentage values */
#define APM_CRITICAL 10
diff --git a/arch/sh/boards/mach-hp6xx/pm.c b/arch/sh/boards/mach-hp6xx/pm.c
index e96684def78..64af1f2eef0 100644
--- a/arch/sh/boards/mach-hp6xx/pm.c
+++ b/arch/sh/boards/mach-hp6xx/pm.c
@@ -12,7 +12,7 @@
#include <linux/time.h>
#include <asm/io.h>
#include <asm/hd64461.h>
-#include <asm/hp6xx.h>
+#include <mach/hp6xx.h>
#include <cpu/dac.h>
#include <asm/pm.h>
diff --git a/arch/sh/boards/mach-hp6xx/setup.c b/arch/sh/boards/mach-hp6xx/setup.c
index 475b46caec1..48fece78ff5 100644
--- a/arch/sh/boards/mach-hp6xx/setup.c
+++ b/arch/sh/boards/mach-hp6xx/setup.c
@@ -15,7 +15,7 @@
#include <asm/hd64461.h>
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/hp6xx.h>
+#include <mach/hp6xx.h>
#include <cpu/dac.h>
#define SCPCR 0xa4000116
diff --git a/arch/sh/boards/mach-lboxre2/irq.c b/arch/sh/boards/mach-lboxre2/irq.c
index 5a1c3bbe7b5..8aa171ab833 100644
--- a/arch/sh/boards/mach-lboxre2/irq.c
+++ b/arch/sh/boards/mach-lboxre2/irq.c
@@ -15,7 +15,7 @@
#include <linux/irq.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/lboxre2.h>
+#include <mach/lboxre2.h>
/*
* Initialize IRQ setting
diff --git a/arch/sh/boards/mach-lboxre2/setup.c b/arch/sh/boards/mach-lboxre2/setup.c
index c74440d38ee..2b0b5818e1e 100644
--- a/arch/sh/boards/mach-lboxre2/setup.c
+++ b/arch/sh/boards/mach-lboxre2/setup.c
@@ -16,7 +16,7 @@
#include <linux/ata_platform.h>
#include <asm/machvec.h>
#include <asm/addrspace.h>
-#include <asm/lboxre2.h>
+#include <mach/lboxre2.h>
#include <asm/io.h>
static struct resource cf_ide_resources[] = {
diff --git a/arch/sh/boards/mach-microdev/io.c b/arch/sh/boards/mach-microdev/io.c
index 9f8a540f7e1..52dd748211c 100644
--- a/arch/sh/boards/mach-microdev/io.c
+++ b/arch/sh/boards/mach-microdev/io.c
@@ -15,7 +15,7 @@
#include <linux/pci.h>
#include <linux/wait.h>
#include <asm/io.h>
-#include <asm/microdev.h>
+#include <mach/microdev.h>
/*
* we need to have a 'safe' address to re-direct all I/O requests
diff --git a/arch/sh/boards/mach-microdev/irq.c b/arch/sh/boards/mach-microdev/irq.c
index 4d335077a3f..702753cbd28 100644
--- a/arch/sh/boards/mach-microdev/irq.c
+++ b/arch/sh/boards/mach-microdev/irq.c
@@ -14,7 +14,7 @@
#include <linux/interrupt.h>
#include <asm/system.h>
#include <asm/io.h>
-#include <asm/microdev.h>
+#include <mach/microdev.h>
#define NUM_EXTERNAL_IRQS 16 /* IRL0 .. IRL15 */
diff --git a/arch/sh/boards/mach-microdev/setup.c b/arch/sh/boards/mach-microdev/setup.c
index fc8cd06d66c..a9202fe3cb5 100644
--- a/arch/sh/boards/mach-microdev/setup.c
+++ b/arch/sh/boards/mach-microdev/setup.c
@@ -14,7 +14,7 @@
#include <linux/platform_device.h>
#include <linux/ioport.h>
#include <video/s1d13xxxfb.h>
-#include <asm/microdev.h>
+#include <mach/microdev.h>
#include <asm/io.h>
#include <asm/machvec.h>
diff --git a/arch/sh/boards/mach-migor/lcd_qvga.c b/arch/sh/boards/mach-migor/lcd_qvga.c
index 71a40710a5a..de9014a8a93 100644
--- a/arch/sh/boards/mach-migor/lcd_qvga.c
+++ b/arch/sh/boards/mach-migor/lcd_qvga.c
@@ -20,7 +20,7 @@
#include <linux/gpio.h>
#include <video/sh_mobile_lcdc.h>
#include <cpu/sh7722.h>
-#include <asm/migor.h>
+#include <mach/migor.h>
/* LCD Module is a PH240320T according to board schematics. This module
* is made up of a 240x320 LCD hooked up to a R61505U (or HX8347-A01?)
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index d00cce04d6e..769d6304342 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -25,7 +25,7 @@
#include <asm/machvec.h>
#include <asm/io.h>
#include <asm/sh_keysc.h>
-#include <asm/migor.h>
+#include <mach/migor.h>
#include <cpu/sh7722.h>
/* Address IRQ Size Bus Description
diff --git a/arch/sh/boards/mach-r2d/irq.c b/arch/sh/boards/mach-r2d/irq.c
index 8e49f6e5124..c70fecedcac 100644
--- a/arch/sh/boards/mach-r2d/irq.c
+++ b/arch/sh/boards/mach-r2d/irq.c
@@ -13,7 +13,7 @@
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/io.h>
-#include <asm/rts7751r2d.h>
+#include <mach/r2d.h>
#define R2D_NR_IRL 13
diff --git a/arch/sh/boards/mach-r2d/setup.c b/arch/sh/boards/mach-r2d/setup.c
index 2308e8753bc..c585be00956 100644
--- a/arch/sh/boards/mach-r2d/setup.c
+++ b/arch/sh/boards/mach-r2d/setup.c
@@ -18,7 +18,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
#include <asm/machvec.h>
-#include <asm/rts7751r2d.h>
+#include <mach/r2d.h>
#include <asm/io.h>
#include <asm/io_trapped.h>
#include <asm/spi.h>
diff --git a/arch/sh/boards/mach-sdk7780/irq.c b/arch/sh/boards/mach-sdk7780/irq.c
index 87cdc578f6f..855558163c5 100644
--- a/arch/sh/boards/mach-sdk7780/irq.c
+++ b/arch/sh/boards/mach-sdk7780/irq.c
@@ -12,7 +12,7 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
-#include <asm/sdk7780.h>
+#include <mach/sdk7780.h>
enum {
UNUSED = 0,
diff --git a/arch/sh/boards/mach-sdk7780/setup.c b/arch/sh/boards/mach-sdk7780/setup.c
index acc5932587f..aad94a78dc7 100644
--- a/arch/sh/boards/mach-sdk7780/setup.c
+++ b/arch/sh/boards/mach-sdk7780/setup.c
@@ -13,7 +13,7 @@
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <asm/machvec.h>
-#include <asm/sdk7780.h>
+#include <mach/sdk7780.h>
#include <asm/heartbeat.h>
#include <asm/io.h>
#include <asm/addrspace.h>
diff --git a/arch/sh/boards/mach-sh7763rdp/irq.c b/arch/sh/boards/mach-sh7763rdp/irq.c
index fd850bad2de..d8ebfa7d8c7 100644
--- a/arch/sh/boards/mach-sh7763rdp/irq.c
+++ b/arch/sh/boards/mach-sh7763rdp/irq.c
@@ -15,7 +15,7 @@
#include <linux/irq.h>
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/sh7763rdp.h>
+#include <mach/sh7763rdp.h>
#define INTC_BASE (0xFFD00000)
#define INTC_INT2PRI7 (INTC_BASE+0x4001C)
diff --git a/arch/sh/boards/mach-sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c
index 23850da05e3..6f926fd2162 100644
--- a/arch/sh/boards/mach-sh7763rdp/setup.c
+++ b/arch/sh/boards/mach-sh7763rdp/setup.c
@@ -17,7 +17,7 @@
#include <linux/mtd/physmap.h>
#include <linux/fb.h>
#include <linux/io.h>
-#include <asm/sh7763rdp.h>
+#include <mach/sh7763rdp.h>
#include <asm/sh_eth.h>
#include <asm/sh7760fb.h>
diff --git a/arch/sh/boards/mach-snapgear/setup.c b/arch/sh/boards/mach-snapgear/setup.c
index a5e349d3dda..a3277a23cf1 100644
--- a/arch/sh/boards/mach-snapgear/setup.c
+++ b/arch/sh/boards/mach-snapgear/setup.c
@@ -19,7 +19,7 @@
#include <linux/module.h>
#include <linux/sched.h>
#include <asm/machvec.h>
-#include <asm/snapgear.h>
+#include <mach/snapgear.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <cpu/timer.h>
diff --git a/arch/sh/boards/mach-systemh/io.c b/arch/sh/boards/mach-systemh/io.c
index 1b767e1a142..dec3db0ee93 100644
--- a/arch/sh/boards/mach-systemh/io.c
+++ b/arch/sh/boards/mach-systemh/io.c
@@ -9,7 +9,7 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/pci.h>
-#include <asm/systemh7751.h>
+#include <mach/systemh7751.h>
#include <asm/addrspace.h>
#include <asm/io.h>
diff --git a/arch/sh/boards/mach-systemh/irq.c b/arch/sh/boards/mach-systemh/irq.c
index 601c9c8cdbe..538406872a8 100644
--- a/arch/sh/boards/mach-systemh/irq.c
+++ b/arch/sh/boards/mach-systemh/irq.c
@@ -14,7 +14,7 @@
#include <linux/interrupt.h>
#include <asm/io.h>
-#include <asm/systemh7751.h>
+#include <mach/systemh7751.h>
#include <asm/smc37c93x.h>
/* address of external interrupt mask register
diff --git a/arch/sh/boards/mach-systemh/setup.c b/arch/sh/boards/mach-systemh/setup.c
index ee78af84277..219fd800a43 100644
--- a/arch/sh/boards/mach-systemh/setup.c
+++ b/arch/sh/boards/mach-systemh/setup.c
@@ -16,7 +16,7 @@
*/
#include <linux/init.h>
#include <asm/machvec.h>
-#include <asm/systemh7751.h>
+#include <mach/systemh7751.h>
extern void make_systemh_irq(unsigned int irq);
diff --git a/arch/sh/boards/mach-titan/io.c b/arch/sh/boards/mach-titan/io.c
index 4730c1dd697..4badad4c6f3 100644
--- a/arch/sh/boards/mach-titan/io.c
+++ b/arch/sh/boards/mach-titan/io.c
@@ -4,7 +4,7 @@
#include <linux/pci.h>
#include <asm/machvec.h>
#include <asm/addrspace.h>
-#include <asm/titan.h>
+#include <mach/titan.h>
#include <asm/io.h>
static inline unsigned int port2adr(unsigned int port)
diff --git a/arch/sh/boards/mach-titan/setup.c b/arch/sh/boards/mach-titan/setup.c
index 5de3b2ad71a..81e7e0f0386 100644
--- a/arch/sh/boards/mach-titan/setup.c
+++ b/arch/sh/boards/mach-titan/setup.c
@@ -9,7 +9,7 @@
*/
#include <linux/init.h>
#include <linux/irq.h>
-#include <asm/titan.h>
+#include <mach/titan.h>
#include <asm/io.h>
static void __init init_titan_irq(void)
diff --git a/arch/sh/drivers/pci/ops-lboxre2.c b/arch/sh/drivers/pci/ops-lboxre2.c
index a13cb764b0b..86c0b6fb737 100644
--- a/arch/sh/drivers/pci/ops-lboxre2.c
+++ b/arch/sh/drivers/pci/ops-lboxre2.c
@@ -10,7 +10,7 @@
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/io.h>
-#include <asm/lboxre2.h>
+#include <mach/lboxre2.h>
#include "pci-sh4.h"
static char lboxre2_irq_tab[] __initdata = {
diff --git a/arch/sh/drivers/pci/ops-r7780rp.c b/arch/sh/drivers/pci/ops-r7780rp.c
index 5fdadaeed6f..8555238e63e 100644
--- a/arch/sh/drivers/pci/ops-r7780rp.c
+++ b/arch/sh/drivers/pci/ops-r7780rp.c
@@ -13,7 +13,7 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pci.h>
-#include <asm/r7780rp.h>
+#include <mach/highlander.h>
#include <asm/io.h>
#include "pci-sh4.h"
diff --git a/arch/sh/drivers/pci/ops-rts7751r2d.c b/arch/sh/drivers/pci/ops-rts7751r2d.c
index b3fa3e2ef18..d6ca74b25d5 100644
--- a/arch/sh/drivers/pci/ops-rts7751r2d.c
+++ b/arch/sh/drivers/pci/ops-rts7751r2d.c
@@ -15,7 +15,7 @@
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/io.h>
-#include <asm/rts7751r2d.h>
+#include <mach/r2d.h>
#include "pci-sh4.h"
static u8 rts7751r2d_irq_tab[] __initdata = {
diff --git a/arch/sh/drivers/pci/ops-sdk7780.c b/arch/sh/drivers/pci/ops-sdk7780.c
index 66a9b4047f2..4dcc64184b2 100644
--- a/arch/sh/drivers/pci/ops-sdk7780.c
+++ b/arch/sh/drivers/pci/ops-sdk7780.c
@@ -13,7 +13,7 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pci.h>
-#include <asm/sdk7780.h>
+#include <mach/sdk7780.h>
#include <asm/io.h>
#include "pci-sh4.h"
diff --git a/arch/sh/drivers/pci/ops-titan.c b/arch/sh/drivers/pci/ops-titan.c
index ac8ee2312cd..a8f7801a34a 100644
--- a/arch/sh/drivers/pci/ops-titan.c
+++ b/arch/sh/drivers/pci/ops-titan.c
@@ -16,7 +16,7 @@
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/io.h>
-#include <asm/titan.h>
+#include <mach/titan.h>
#include "pci-sh4.h"
static char titan_irq_tab[] __initdata = {
diff --git a/arch/sh/include/asm/edosk7705.h b/arch/sh/include/asm/edosk7705.h
deleted file mode 100644
index 5bdc9d9be3d..00000000000
--- a/arch/sh/include/asm/edosk7705.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * include/asm-sh/edosk7705.h
- *
- * Modified version of io_se.h for the EDOSK7705 specific functions.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * IO functions for an Hitachi EDOSK7705 development board
- */
-
-#ifndef __ASM_SH_EDOSK7705_IO_H
-#define __ASM_SH_EDOSK7705_IO_H
-
-#include <asm/io_generic.h>
-
-extern unsigned char sh_edosk7705_inb(unsigned long port);
-extern unsigned int sh_edosk7705_inl(unsigned long port);
-
-extern void sh_edosk7705_outb(unsigned char value, unsigned long port);
-extern void sh_edosk7705_outl(unsigned int value, unsigned long port);
-
-extern void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count);
-extern void sh_edosk7705_insl(unsigned long port, void *addr, unsigned long count);
-extern void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count);
-extern void sh_edosk7705_outsl(unsigned long port, const void *addr, unsigned long count);
-
-extern unsigned long sh_edosk7705_isa_port2addr(unsigned long offset);
-
-#endif /* __ASM_SH_EDOSK7705_IO_H */
diff --git a/arch/sh/include/asm/hp6xx.h b/arch/sh/include/asm/hp6xx.h
deleted file mode 100644
index 0d4165a32dc..00000000000
--- a/arch/sh/include/asm/hp6xx.h
+++ /dev/null
@@ -1,58 +0,0 @@
-#ifndef __ASM_SH_HP6XX_H
-#define __ASM_SH_HP6XX_H
-
-/*
- * Copyright (C) 2003, 2004, 2005 Andriy Skulysh
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-
-#define HP680_BTN_IRQ 32 /* IRQ0_IRQ */
-#define HP680_TS_IRQ 35 /* IRQ3_IRQ */
-#define HP680_HD64461_IRQ 36 /* IRQ4_IRQ */
-
-#define DAC_LCD_BRIGHTNESS 0
-#define DAC_SPEAKER_VOLUME 1
-
-#define PGDR_OPENED 0x01
-#define PGDR_MAIN_BATTERY_OUT 0x04
-#define PGDR_PLAY_BUTTON 0x08
-#define PGDR_REWIND_BUTTON 0x10
-#define PGDR_RECORD_BUTTON 0x20
-
-#define PHDR_TS_PEN_DOWN 0x08
-
-#define PJDR_LED_BLINK 0x02
-
-#define PKDR_LED_GREEN 0x10
-
-#define SCPDR_TS_SCAN_ENABLE 0x20
-#define SCPDR_TS_SCAN_Y 0x02
-#define SCPDR_TS_SCAN_X 0x01
-
-#define SCPCR_TS_ENABLE 0x405
-#define SCPCR_TS_MASK 0xc0f
-
-#define ADC_CHANNEL_TS_Y 1
-#define ADC_CHANNEL_TS_X 2
-#define ADC_CHANNEL_BATTERY 3
-#define ADC_CHANNEL_BACKUP 4
-#define ADC_CHANNEL_CHARGE 5
-
-#define HD64461_GPADR_SPEAKER 0x01
-#define HD64461_GPADR_PCMCIA0 (0x02|0x08)
-
-#define HD64461_GPBDR_LCDOFF 0x01
-#define HD64461_GPBDR_LCD_CONTRAST_MASK 0x78
-#define HD64461_GPBDR_LED_RED 0x80
-
-#include <asm/hd64461.h>
-#include <asm/io.h>
-
-#define PJDR 0xa4000130
-#define PKDR 0xa4000132
-
-#endif /* __ASM_SH_HP6XX_H */
diff --git a/arch/sh/include/asm/lboxre2.h b/arch/sh/include/asm/lboxre2.h
deleted file mode 100644
index e6d16050492..00000000000
--- a/arch/sh/include/asm/lboxre2.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef __ASM_SH_LBOXRE2_H
-#define __ASM_SH_LBOXRE2_H
-
-/*
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * NTT COMWARE L-BOX RE2 support
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-
-#define IRQ_CF1 9 /* CF1 */
-#define IRQ_CF0 10 /* CF0 */
-#define IRQ_INTD 11 /* INTD */
-#define IRQ_ETH1 12 /* Ether1 */
-#define IRQ_ETH0 13 /* Ether0 */
-#define IRQ_INTA 14 /* INTA */
-
-void init_lboxre2_IRQ(void);
-
-#define __IO_PREFIX lboxre2
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_LBOXRE2_H */
diff --git a/arch/sh/include/asm/magicpanelr2.h b/arch/sh/include/asm/magicpanelr2.h
deleted file mode 100644
index c644a77ee35..00000000000
--- a/arch/sh/include/asm/magicpanelr2.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * include/asm-sh/magicpanelr2.h
- *
- * Copyright (C) 2007 Markus Brunner, Mark Jonas
- *
- * I/O addresses and bitmasks for Magic Panel Release 2 board
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef __ASM_SH_MAGICPANELR2_H
-#define __ASM_SH_MAGICPANELR2_H
-
-#include <asm/gpio.h>
-
-#define __IO_PREFIX mpr2
-#include <asm/io_generic.h>
-
-
-#define SETBITS_OUTB(mask, reg) ctrl_outb(ctrl_inb(reg) | mask, reg)
-#define SETBITS_OUTW(mask, reg) ctrl_outw(ctrl_inw(reg) | mask, reg)
-#define SETBITS_OUTL(mask, reg) ctrl_outl(ctrl_inl(reg) | mask, reg)
-#define CLRBITS_OUTB(mask, reg) ctrl_outb(ctrl_inb(reg) & ~mask, reg)
-#define CLRBITS_OUTW(mask, reg) ctrl_outw(ctrl_inw(reg) & ~mask, reg)
-#define CLRBITS_OUTL(mask, reg) ctrl_outl(ctrl_inl(reg) & ~mask, reg)
-
-
-#define PA_LED PORT_PADR /* LED */
-
-
-/* BSC */
-#define CMNCR 0xA4FD0000UL
-#define CS0BCR 0xA4FD0004UL
-#define CS2BCR 0xA4FD0008UL
-#define CS3BCR 0xA4FD000CUL
-#define CS4BCR 0xA4FD0010UL
-#define CS5ABCR 0xA4FD0014UL
-#define CS5BBCR 0xA4FD0018UL
-#define CS6ABCR 0xA4FD001CUL
-#define CS6BBCR 0xA4FD0020UL
-#define CS0WCR 0xA4FD0024UL
-#define CS2WCR 0xA4FD0028UL
-#define CS3WCR 0xA4FD002CUL
-#define CS4WCR 0xA4FD0030UL
-#define CS5AWCR 0xA4FD0034UL
-#define CS5BWCR 0xA4FD0038UL
-#define CS6AWCR 0xA4FD003CUL
-#define CS6BWCR 0xA4FD0040UL
-
-
-/* usb */
-
-#define PORT_UTRCTL 0xA405012CUL
-#define PORT_UCLKCR_W 0xA40A0008UL
-
-#define INTC_ICR0 0xA414FEE0UL
-#define INTC_ICR1 0xA4140010UL
-#define INTC_ICR2 0xA4140012UL
-
-/* MTD */
-
-#define MPR2_MTD_BOOTLOADER_SIZE 0x00060000UL
-#define MPR2_MTD_KERNEL_SIZE 0x00200000UL
-
-#endif /* __ASM_SH_MAGICPANELR2_H */
diff --git a/arch/sh/include/asm/microdev.h b/arch/sh/include/asm/microdev.h
deleted file mode 100644
index 1aed15856e1..00000000000
--- a/arch/sh/include/asm/microdev.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * linux/include/asm-sh/microdev.h
- *
- * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
- *
- * Definitions for the SuperH SH4-202 MicroDev board.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- */
-#ifndef __ASM_SH_MICRODEV_H
-#define __ASM_SH_MICRODEV_H
-
-extern void init_microdev_irq(void);
-extern void microdev_print_fpga_intc_status(void);
-
-/*
- * The following are useful macros for manipulating the interrupt
- * controller (INTC) on the CPU-board FPGA. should be noted that there
- * is an INTC on the FPGA, and a separate INTC on the SH4-202 core -
- * these are two different things, both of which need to be prorammed to
- * correctly route - unfortunately, they have the same name and
- * abbreviations!
- */
-#define MICRODEV_FPGA_INTC_BASE 0xa6110000ul /* INTC base address on CPU-board FPGA */
-#define MICRODEV_FPGA_INTENB_REG (MICRODEV_FPGA_INTC_BASE+0ul) /* Interrupt Enable Register on INTC on CPU-board FPGA */
-#define MICRODEV_FPGA_INTDSB_REG (MICRODEV_FPGA_INTC_BASE+8ul) /* Interrupt Disable Register on INTC on CPU-board FPGA */
-#define MICRODEV_FPGA_INTC_MASK(n) (1ul<<(n)) /* Interrupt mask to enable/disable INTC in CPU-board FPGA */
-#define MICRODEV_FPGA_INTPRI_REG(n) (MICRODEV_FPGA_INTC_BASE+0x10+((n)/8)*8)/* Interrupt Priority Register on INTC on CPU-board FPGA */
-#define MICRODEV_FPGA_INTPRI_LEVEL(n,x) ((x)<<(((n)%8)*4)) /* MICRODEV_FPGA_INTPRI_LEVEL(int_number, int_level) */
-#define MICRODEV_FPGA_INTPRI_MASK(n) (MICRODEV_FPGA_INTPRI_LEVEL((n),0xful)) /* Interrupt Priority Mask on INTC on CPU-board FPGA */
-#define MICRODEV_FPGA_INTSRC_REG (MICRODEV_FPGA_INTC_BASE+0x30ul) /* Interrupt Source Register on INTC on CPU-board FPGA */
-#define MICRODEV_FPGA_INTREQ_REG (MICRODEV_FPGA_INTC_BASE+0x38ul) /* Interrupt Request Register on INTC on CPU-board FPGA */
-
-
-/*
- * The following are the IRQ numbers for the Linux Kernel for external
- * interrupts. i.e. the numbers seen by 'cat /proc/interrupt'.
- */
-#define MICRODEV_LINUX_IRQ_KEYBOARD 1 /* SuperIO Keyboard */
-#define MICRODEV_LINUX_IRQ_SERIAL1 2 /* SuperIO Serial #1 */
-#define MICRODEV_LINUX_IRQ_ETHERNET 3 /* on-board Ethnernet */
-#define MICRODEV_LINUX_IRQ_SERIAL2 4 /* SuperIO Serial #2 */
-#define MICRODEV_LINUX_IRQ_USB_HC 7 /* on-board USB HC */
-#define MICRODEV_LINUX_IRQ_MOUSE 12 /* SuperIO PS/2 Mouse */
-#define MICRODEV_LINUX_IRQ_IDE2 13 /* SuperIO IDE #2 */
-#define MICRODEV_LINUX_IRQ_IDE1 14 /* SuperIO IDE #1 */
-
-/*
- * The following are the IRQ numbers for the INTC on the FPGA for
- * external interrupts. i.e. the bits in the INTC registers in the
- * FPGA.
- */
-#define MICRODEV_FPGA_IRQ_KEYBOARD 1 /* SuperIO Keyboard */
-#define MICRODEV_FPGA_IRQ_SERIAL1 3 /* SuperIO Serial #1 */
-#define MICRODEV_FPGA_IRQ_SERIAL2 4 /* SuperIO Serial #2 */
-#define MICRODEV_FPGA_IRQ_MOUSE 12 /* SuperIO PS/2 Mouse */
-#define MICRODEV_FPGA_IRQ_IDE1 14 /* SuperIO IDE #1 */
-#define MICRODEV_FPGA_IRQ_IDE2 15 /* SuperIO IDE #2 */
-#define MICRODEV_FPGA_IRQ_USB_HC 16 /* on-board USB HC */
-#define MICRODEV_FPGA_IRQ_ETHERNET 18 /* on-board Ethnernet */
-
-#define MICRODEV_IRQ_PCI_INTA 8
-#define MICRODEV_IRQ_PCI_INTB 9
-#define MICRODEV_IRQ_PCI_INTC 10
-#define MICRODEV_IRQ_PCI_INTD 11
-
-#define __IO_PREFIX microdev
-#include <asm/io_generic.h>
-
-#if defined(CONFIG_PCI)
-unsigned char microdev_pci_inb(unsigned long port);
-unsigned short microdev_pci_inw(unsigned long port);
-unsigned long microdev_pci_inl(unsigned long port);
-void microdev_pci_outb(unsigned char data, unsigned long port);
-void microdev_pci_outw(unsigned short data, unsigned long port);
-void microdev_pci_outl(unsigned long data, unsigned long port);
-#endif
-
-#endif /* __ASM_SH_MICRODEV_H */
diff --git a/arch/sh/include/asm/migor.h b/arch/sh/include/asm/migor.h
deleted file mode 100644
index e451f0229e0..00000000000
--- a/arch/sh/include/asm/migor.h
+++ /dev/null
@@ -1,64 +0,0 @@
-#ifndef __ASM_SH_MIGOR_H
-#define __ASM_SH_MIGOR_H
-
-/*
- * linux/include/asm-sh/migor.h
- *
- * Copyright (C) 2008 Renesas Solutions
- *
- * Portions Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-#include <asm/addrspace.h>
-
-/* GPIO */
-#define PORT_PACR 0xa4050100
-#define PORT_PDCR 0xa4050106
-#define PORT_PECR 0xa4050108
-#define PORT_PHCR 0xa405010e
-#define PORT_PJCR 0xa4050110
-#define PORT_PKCR 0xa4050112
-#define PORT_PLCR 0xa4050114
-#define PORT_PMCR 0xa4050116
-#define PORT_PRCR 0xa405011c
-#define PORT_PTCR 0xa4050140
-#define PORT_PUCR 0xa4050142
-#define PORT_PVCR 0xa4050144
-#define PORT_PWCR 0xa4050146
-#define PORT_PXCR 0xa4050148
-#define PORT_PYCR 0xa405014a
-#define PORT_PZCR 0xa405014c
-#define PORT_PADR 0xa4050120
-#define PORT_PHDR 0xa405012e
-#define PORT_PTDR 0xa4050160
-#define PORT_PWDR 0xa4050166
-
-#define PORT_HIZCRA 0xa4050158
-#define PORT_HIZCRC 0xa405015c
-
-#define PORT_MSELCRB 0xa4050182
-
-#define PORT_PSELA 0xa405014e
-#define PORT_PSELB 0xa4050150
-#define PORT_PSELC 0xa4050152
-#define PORT_PSELD 0xa4050154
-#define PORT_PSELE 0xa4050156
-
-#define PORT_HIZCRA 0xa4050158
-#define PORT_HIZCRB 0xa405015a
-#define PORT_HIZCRC 0xa405015c
-
-#define BSC_CS4BCR 0xfec10010
-#define BSC_CS6ABCR 0xfec1001c
-#define BSC_CS4WCR 0xfec10030
-
-#include <video/sh_mobile_lcdc.h>
-
-int migor_lcd_qvga_setup(void *board_data, void *sys_ops_handle,
- struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
-
-#endif /* __ASM_SH_MIGOR_H */
diff --git a/arch/sh/include/asm/r7780rp.h b/arch/sh/include/asm/r7780rp.h
deleted file mode 100644
index 306f7359f7d..00000000000
--- a/arch/sh/include/asm/r7780rp.h
+++ /dev/null
@@ -1,198 +0,0 @@
-#ifndef __ASM_SH_RENESAS_R7780RP_H
-#define __ASM_SH_RENESAS_R7780RP_H
-
-/* Box specific addresses. */
-#if defined(CONFIG_SH_R7780MP)
-#define PA_BCR 0xa4000000 /* FPGA */
-#define PA_SDPOW (-1)
-
-#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */
-#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */
-#define PA_IRLPRI1 (PA_BCR+0x0004) /* Interrupt Priorty 1 */
-#define PA_IRLPRI2 (PA_BCR+0x0006) /* Interrupt Priorty 2 */
-#define PA_IRLPRI3 (PA_BCR+0x0008) /* Interrupt Priorty 3 */
-#define PA_IRLPRI4 (PA_BCR+0x000a) /* Interrupt Priorty 4 */
-#define PA_RSTCTL (PA_BCR+0x000c) /* Reset Control */
-#define PA_PCIBD (PA_BCR+0x000e) /* PCI Board detect control */
-#define PA_PCICD (PA_BCR+0x0010) /* PCI Conector detect control */
-#define PA_EXTGIO (PA_BCR+0x0016) /* Extension GPIO Control */
-#define PA_IVDRMON (PA_BCR+0x0018) /* iVDR Moniter control */
-#define PA_IVDRCTL (PA_BCR+0x001a) /* iVDR control */
-#define PA_OBLED (PA_BCR+0x001c) /* On Board LED control */
-#define PA_OBSW (PA_BCR+0x001e) /* On Board Switch control */
-#define PA_AUDIOSEL (PA_BCR+0x0020) /* Sound Interface Select control */
-#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */
-#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */
-#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */
-#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */
-#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */
-#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */
-#define PA_DBSW (PA_BCR+0x0200) /* Debug Board Switch control */
-#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */
-#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */
-#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */
-#define PA_SCSMR0 (PA_BCR+0x0400) /* SCIF0 Serial mode control */
-#define PA_SCBRR0 (PA_BCR+0x0404) /* SCIF0 Bit rate control */
-#define PA_SCSCR0 (PA_BCR+0x0408) /* SCIF0 Serial control */
-#define PA_SCFTDR0 (PA_BCR+0x040c) /* SCIF0 Send FIFO control */
-#define PA_SCFSR0 (PA_BCR+0x0410) /* SCIF0 Serial status control */
-#define PA_SCFRDR0 (PA_BCR+0x0414) /* SCIF0 Receive FIFO control */
-#define PA_SCFCR0 (PA_BCR+0x0418) /* SCIF0 FIFO control */
-#define PA_SCTFDR0 (PA_BCR+0x041c) /* SCIF0 Send FIFO data control */
-#define PA_SCRFDR0 (PA_BCR+0x0420) /* SCIF0 Receive FIFO data control */
-#define PA_SCSPTR0 (PA_BCR+0x0424) /* SCIF0 Serial Port control */
-#define PA_SCLSR0 (PA_BCR+0x0428) /* SCIF0 Line Status control */
-#define PA_SCRER0 (PA_BCR+0x042c) /* SCIF0 Serial Error control */
-#define PA_SCSMR1 (PA_BCR+0x0500) /* SCIF1 Serial mode control */
-#define PA_SCBRR1 (PA_BCR+0x0504) /* SCIF1 Bit rate control */
-#define PA_SCSCR1 (PA_BCR+0x0508) /* SCIF1 Serial control */
-#define PA_SCFTDR1 (PA_BCR+0x050c) /* SCIF1 Send FIFO control */
-#define PA_SCFSR1 (PA_BCR+0x0510) /* SCIF1 Serial status control */
-#define PA_SCFRDR1 (PA_BCR+0x0514) /* SCIF1 Receive FIFO control */
-#define PA_SCFCR1 (PA_BCR+0x0518) /* SCIF1 FIFO control */
-#define PA_SCTFDR1 (PA_BCR+0x051c) /* SCIF1 Send FIFO data control */
-#define PA_SCRFDR1 (PA_BCR+0x0520) /* SCIF1 Receive FIFO data control */
-#define PA_SCSPTR1 (PA_BCR+0x0524) /* SCIF1 Serial Port control */
-#define PA_SCLSR1 (PA_BCR+0x0528) /* SCIF1 Line Status control */
-#define PA_SCRER1 (PA_BCR+0x052c) /* SCIF1 Serial Error control */
-#define PA_SMCR (PA_BCR+0x0600) /* 2-wire Serial control */
-#define PA_SMSMADR (PA_BCR+0x0602) /* 2-wire Serial Slave control */
-#define PA_SMMR (PA_BCR+0x0604) /* 2-wire Serial Mode control */
-#define PA_SMSADR1 (PA_BCR+0x0606) /* 2-wire Serial Address1 control */
-#define PA_SMTRDR1 (PA_BCR+0x0646) /* 2-wire Serial Data1 control */
-#define PA_VERREG (PA_BCR+0x0700) /* FPGA Version Register */
-#define PA_POFF (PA_BCR+0x0800) /* System Power Off control */
-#define PA_PMR (PA_BCR+0x0900) /* */
-
-#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
-#define IVDR_CK_ON 8 /* iVDR Clock ON */
-
-#elif defined(CONFIG_SH_R7780RP)
-#define PA_POFF (-1)
-
-#define PA_BCR 0xa5000000 /* FPGA */
-#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */
-#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */
-#define PA_SDPOW (PA_BCR+0x0004) /* SD Power control */
-#define PA_RSTCTL (PA_BCR+0x0006) /* Device Reset control */
-#define PA_PCIBD (PA_BCR+0x0008) /* PCI Board detect control */
-#define PA_PCICD (PA_BCR+0x000a) /* PCI Conector detect control */
-#define PA_ZIGIO1 (PA_BCR+0x000c) /* Zigbee IO control 1 */
-#define PA_ZIGIO2 (PA_BCR+0x000e) /* Zigbee IO control 2 */
-#define PA_ZIGIO3 (PA_BCR+0x0010) /* Zigbee IO control 3 */
-#define PA_ZIGIO4 (PA_BCR+0x0012) /* Zigbee IO control 4 */
-#define PA_IVDRMON (PA_BCR+0x0014) /* iVDR Moniter control */
-#define PA_IVDRCTL (PA_BCR+0x0016) /* iVDR control */
-#define PA_OBLED (PA_BCR+0x0018) /* On Board LED control */
-#define PA_OBSW (PA_BCR+0x001a) /* On Board Switch control */
-#define PA_AUDIOSEL (PA_BCR+0x001c) /* Sound Interface Select control */
-#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */
-#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */
-#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */
-#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */
-#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */
-#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */
-#define PA_DBDET (PA_BCR+0x0200) /* Debug Board detect control */
-#define PA_DBDISPCTL (PA_BCR+0x0202) /* Debug Board Dot timing control */
-#define PA_DBSW (PA_BCR+0x0204) /* Debug Board Switch control */
-#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */
-#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */
-#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */
-#define PA_SCSMR (PA_BCR+0x0400) /* SCIF Serial mode control */
-#define PA_SCBRR (PA_BCR+0x0402) /* SCIF Bit rate control */
-#define PA_SCSCR (PA_BCR+0x0404) /* SCIF Serial control */
-#define PA_SCFDTR (PA_BCR+0x0406) /* SCIF Send FIFO control */
-#define PA_SCFSR (PA_BCR+0x0408) /* SCIF Serial status control */
-#define PA_SCFRDR (PA_BCR+0x040a) /* SCIF Receive FIFO control */
-#define PA_SCFCR (PA_BCR+0x040c) /* SCIF FIFO control */
-#define PA_SCFDR (PA_BCR+0x040e) /* SCIF FIFO data control */
-#define PA_SCLSR (PA_BCR+0x0412) /* SCIF Line Status control */
-#define PA_SMCR (PA_BCR+0x0500) /* 2-wire Serial control */
-#define PA_SMSMADR (PA_BCR+0x0502) /* 2-wire Serial Slave control */
-#define PA_SMMR (PA_BCR+0x0504) /* 2-wire Serial Mode control */
-#define PA_SMSADR1 (PA_BCR+0x0506) /* 2-wire Serial Address1 control */
-#define PA_SMTRDR1 (PA_BCR+0x0546) /* 2-wire Serial Data1 control */
-#define PA_VERREG (PA_BCR+0x0600) /* FPGA Version Register */
-
-#define PA_AX88796L 0xa5800400 /* AX88796L Area */
-#define PA_SC1602BSLB 0xa6000000 /* SC1602BSLB Area */
-#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */
-#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */
-
-#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
-
-#define IVDR_CK_ON 8 /* iVDR Clock ON */
-
-#elif defined(CONFIG_SH_R7785RP)
-#define PA_BCR 0xa4000000 /* FPGA */
-#define PA_SDPOW (-1)
-
-#define PA_PCISCR (PA_BCR+0x0000)
-#define PA_IRLPRA (PA_BCR+0x0002)
-#define PA_IRLPRB (PA_BCR+0x0004)
-#define PA_IRLPRC (PA_BCR+0x0006)
-#define PA_IRLPRD (PA_BCR+0x0008)
-#define IRLCNTR1 (PA_BCR+0x0010)
-#define PA_IRLPRE (PA_BCR+0x000a)
-#define PA_IRLPRF (PA_BCR+0x000c)
-#define PA_EXIRLCR (PA_BCR+0x000e)
-#define PA_IRLMCR1 (PA_BCR+0x0010)
-#define PA_IRLMCR2 (PA_BCR+0x0012)
-#define PA_IRLSSR1 (PA_BCR+0x0014)
-#define PA_IRLSSR2 (PA_BCR+0x0016)
-#define PA_CFTCR (PA_BCR+0x0100)
-#define PA_CFPCR (PA_BCR+0x0102)
-#define PA_PCICR (PA_BCR+0x0110)
-#define PA_IVDRCTL (PA_BCR+0x0112)
-#define PA_IVDRSR (PA_BCR+0x0114)
-#define PA_PDRSTCR (PA_BCR+0x0116)
-#define PA_POFF (PA_BCR+0x0120)
-#define PA_LCDCR (PA_BCR+0x0130)
-#define PA_TPCR (PA_BCR+0x0140)
-#define PA_TPCKCR (PA_BCR+0x0142)
-#define PA_TPRSTR (PA_BCR+0x0144)
-#define PA_TPXPDR (PA_BCR+0x0146)
-#define PA_TPYPDR (PA_BCR+0x0148)
-#define PA_GPIOPFR (PA_BCR+0x0150)
-#define PA_GPIODR (PA_BCR+0x0152)
-#define PA_OBLED (PA_BCR+0x0154)
-#define PA_SWSR (PA_BCR+0x0156)
-#define PA_VERREG (PA_BCR+0x0158)
-#define PA_SMCR (PA_BCR+0x0200)
-#define PA_SMSMADR (PA_BCR+0x0202)
-#define PA_SMMR (PA_BCR+0x0204)
-#define PA_SMSADR1 (PA_BCR+0x0206)
-#define PA_SMSADR32 (PA_BCR+0x0244)
-#define PA_SMTRDR1 (PA_BCR+0x0246)
-#define PA_SMTRDR16 (PA_BCR+0x0264)
-#define PA_CU3MDR (PA_BCR+0x0300)
-#define PA_CU5MDR (PA_BCR+0x0302)
-#define PA_MMSR (PA_BCR+0x0400)
-
-#define IVDR_CK_ON 4 /* iVDR Clock ON */
-#endif
-
-#define HL_FPGA_IRQ_BASE 200
-#define HL_NR_IRL 15
-
-#define IRQ_AX88796 (HL_FPGA_IRQ_BASE + 0)
-#define IRQ_CF (HL_FPGA_IRQ_BASE + 1)
-#define IRQ_PSW (HL_FPGA_IRQ_BASE + 2)
-#define IRQ_EXT0 (HL_FPGA_IRQ_BASE + 3)
-#define IRQ_EXT1 (HL_FPGA_IRQ_BASE + 4)
-#define IRQ_EXT2 (HL_FPGA_IRQ_BASE + 5)
-#define IRQ_EXT3 (HL_FPGA_IRQ_BASE + 6)
-#define IRQ_EXT4 (HL_FPGA_IRQ_BASE + 7)
-#define IRQ_EXT5 (HL_FPGA_IRQ_BASE + 8)
-#define IRQ_EXT6 (HL_FPGA_IRQ_BASE + 9)
-#define IRQ_EXT7 (HL_FPGA_IRQ_BASE + 10)
-#define IRQ_SMBUS (HL_FPGA_IRQ_BASE + 11)
-#define IRQ_TP (HL_FPGA_IRQ_BASE + 12)
-#define IRQ_RTC (HL_FPGA_IRQ_BASE + 13)
-#define IRQ_TH_ALERT (HL_FPGA_IRQ_BASE + 14)
-#define IRQ_SCIF0 (HL_FPGA_IRQ_BASE + 15)
-#define IRQ_SCIF1 (HL_FPGA_IRQ_BASE + 16)
-
-unsigned char *highlander_plat_irq_setup(void);
-
-#endif /* __ASM_SH_RENESAS_R7780RP */
diff --git a/arch/sh/include/asm/rts7751r2d.h b/arch/sh/include/asm/rts7751r2d.h
deleted file mode 100644
index 0a800157b82..00000000000
--- a/arch/sh/include/asm/rts7751r2d.h
+++ /dev/null
@@ -1,70 +0,0 @@
-#ifndef __ASM_SH_RENESAS_RTS7751R2D_H
-#define __ASM_SH_RENESAS_RTS7751R2D_H
-
-/*
- * linux/include/asm-sh/renesas_rts7751r2d.h
- *
- * Copyright (C) 2000 Atom Create Engineering Co., Ltd.
- *
- * Renesas Technology Sales RTS7751R2D support
- */
-
-/* Board specific addresses. */
-
-#define PA_BCR 0xa4000000 /* FPGA */
-#define PA_IRLMON 0xa4000002 /* Interrupt Status control */
-#define PA_CFCTL 0xa4000004 /* CF Timing control */
-#define PA_CFPOW 0xa4000006 /* CF Power control */
-#define PA_DISPCTL 0xa4000008 /* Display Timing control */
-#define PA_SDMPOW 0xa400000a /* SD Power control */
-#define PA_RTCCE 0xa400000c /* RTC(9701) Enable control */
-#define PA_PCICD 0xa400000e /* PCI Extention detect control */
-#define PA_VOYAGERRTS 0xa4000020 /* VOYAGER Reset control */
-
-#define PA_R2D1_AXRST 0xa4000022 /* AX_LAN Reset control */
-#define PA_R2D1_CFRST 0xa4000024 /* CF Reset control */
-#define PA_R2D1_ADMRTS 0xa4000026 /* SD Reset control */
-#define PA_R2D1_EXTRST 0xa4000028 /* Extention Reset control */
-#define PA_R2D1_CFCDINTCLR 0xa400002a /* CF Insert Interrupt clear */
-
-#define PA_R2DPLUS_CFRST 0xa4000022 /* CF Reset control */
-#define PA_R2DPLUS_ADMRTS 0xa4000024 /* SD Reset control */
-#define PA_R2DPLUS_EXTRST 0xa4000026 /* Extention Reset control */
-#define PA_R2DPLUS_CFCDINTCLR 0xa4000028 /* CF Insert Interrupt clear */
-#define PA_R2DPLUS_KEYCTLCLR 0xa400002a /* Key Interrupt clear */
-
-#define PA_POWOFF 0xa4000030 /* Board Power OFF control */
-#define PA_VERREG 0xa4000032 /* FPGA Version Register */
-#define PA_INPORT 0xa4000034 /* KEY Input Port control */
-#define PA_OUTPORT 0xa4000036 /* LED control */
-#define PA_BVERREG 0xa4000038 /* Board Revision Register */
-
-#define PA_AX88796L 0xaa000400 /* AX88796L Area */
-#define PA_VOYAGER 0xab000000 /* VOYAGER GX Area */
-#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */
-#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */
-
-#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
-
-#define R2D_FPGA_IRQ_BASE 100
-
-#define IRQ_VOYAGER (R2D_FPGA_IRQ_BASE + 0)
-#define IRQ_EXT (R2D_FPGA_IRQ_BASE + 1)
-#define IRQ_TP (R2D_FPGA_IRQ_BASE + 2)
-#define IRQ_RTC_T (R2D_FPGA_IRQ_BASE + 3)
-#define IRQ_RTC_A (R2D_FPGA_IRQ_BASE + 4)
-#define IRQ_SDCARD (R2D_FPGA_IRQ_BASE + 5)
-#define IRQ_CF_CD (R2D_FPGA_IRQ_BASE + 6)
-#define IRQ_CF_IDE (R2D_FPGA_IRQ_BASE + 7)
-#define IRQ_AX88796 (R2D_FPGA_IRQ_BASE + 8)
-#define IRQ_KEY (R2D_FPGA_IRQ_BASE + 9)
-#define IRQ_PCI_INTA (R2D_FPGA_IRQ_BASE + 10)
-#define IRQ_PCI_INTB (R2D_FPGA_IRQ_BASE + 11)
-#define IRQ_PCI_INTC (R2D_FPGA_IRQ_BASE + 12)
-#define IRQ_PCI_INTD (R2D_FPGA_IRQ_BASE + 13)
-
-/* arch/sh/boards/renesas/rts7751r2d/irq.c */
-void init_rts7751r2d_IRQ(void);
-int rts7751r2d_irq_demux(int);
-
-#endif /* __ASM_SH_RENESAS_RTS7751R2D */
diff --git a/arch/sh/include/asm/sdk7780.h b/arch/sh/include/asm/sdk7780.h
deleted file mode 100644
index 697dc865f21..00000000000
--- a/arch/sh/include/asm/sdk7780.h
+++ /dev/null
@@ -1,81 +0,0 @@
-#ifndef __ASM_SH_RENESAS_SDK7780_H
-#define __ASM_SH_RENESAS_SDK7780_H
-
-/*
- * linux/include/asm-sh/sdk7780.h
- *
- * Renesas Solutions SH7780 SDK Support
- * Copyright (C) 2008 Nicholas Beck <nbeck@mpc-data.co.uk>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <asm/addrspace.h>
-
-/* Box specific addresses. */
-#define SE_AREA0_WIDTH 4 /* Area0: 32bit */
-#define PA_ROM 0xa0000000 /* EPROM */
-#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */
-#define PA_FROM 0xa0800000 /* Flash-ROM */
-#define PA_FROM_SIZE 0x00400000 /* Flash-ROM size 4M byte */
-#define PA_EXT1 0xa4000000
-#define PA_EXT1_SIZE 0x04000000
-#define PA_SDRAM 0xa8000000 /* DDR-SDRAM(Area2/3) 128MB */
-#define PA_SDRAM_SIZE 0x08000000
-
-#define PA_EXT4 0xb0000000
-#define PA_EXT4_SIZE 0x04000000
-#define PA_EXT_USER PA_EXT4 /* User Expansion Space */
-
-#define PA_PERIPHERAL PA_AREA5_IO
-
-/* SRAM/Reserved */
-#define PA_RESERVED (PA_PERIPHERAL + 0)
-/* FPGA base address */
-#define PA_FPGA (PA_PERIPHERAL + 0x01000000)
-/* SMC LAN91C111 */
-#define PA_LAN (PA_PERIPHERAL + 0x01800000)
-
-
-#define FPGA_SRSTR (PA_FPGA + 0x000) /* System reset */
-#define FPGA_IRQ0SR (PA_FPGA + 0x010) /* IRQ0 status */
-#define FPGA_IRQ0MR (PA_FPGA + 0x020) /* IRQ0 mask */
-#define FPGA_BDMR (PA_FPGA + 0x030) /* Board operating mode */
-#define FPGA_INTT0PRTR (PA_FPGA + 0x040) /* Interrupt test mode0 port */
-#define FPGA_INTT0SELR (PA_FPGA + 0x050) /* Int. test mode0 select */
-#define FPGA_INTT1POLR (PA_FPGA + 0x060) /* Int. test mode0 polarity */
-#define FPGA_NMIR (PA_FPGA + 0x070) /* NMI source */
-#define FPGA_NMIMR (PA_FPGA + 0x080) /* NMI mask */
-#define FPGA_IRQR (PA_FPGA + 0x090) /* IRQX source */
-#define FPGA_IRQMR (PA_FPGA + 0x0A0) /* IRQX mask */
-#define FPGA_SLEDR (PA_FPGA + 0x0B0) /* LED control */
-#define PA_LED FPGA_SLEDR
-#define FPGA_MAPSWR (PA_FPGA + 0x0C0) /* Map switch */
-#define FPGA_FPVERR (PA_FPGA + 0x0D0) /* FPGA version */
-#define FPGA_FPDATER (PA_FPGA + 0x0E0) /* FPGA date */
-#define FPGA_RSE (PA_FPGA + 0x100) /* Reset source */
-#define FPGA_EASR (PA_FPGA + 0x110) /* External area select */
-#define FPGA_SPER (PA_FPGA + 0x120) /* Serial port enable */
-#define FPGA_IMSR (PA_FPGA + 0x130) /* Interrupt mode select */
-#define FPGA_PCIMR (PA_FPGA + 0x140) /* PCI Mode */
-#define FPGA_DIPSWMR (PA_FPGA + 0x150) /* DIPSW monitor */
-#define FPGA_FPODR (PA_FPGA + 0x160) /* Output port data */
-#define FPGA_ATAESR (PA_FPGA + 0x170) /* ATA extended bus status */
-#define FPGA_IRQPOLR (PA_FPGA + 0x180) /* IRQx polarity */
-
-
-#define SDK7780_NR_IRL 15
-/* IDE/ATA interrupt */
-#define IRQ_CFCARD 14
-/* SMC interrupt */
-#define IRQ_ETHERNET 6
-
-
-/* arch/sh/boards/renesas/sdk7780/irq.c */
-void init_sdk7780_IRQ(void);
-
-#define __IO_PREFIX sdk7780
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_RENESAS_SDK7780_H */
diff --git a/arch/sh/include/asm/sh7763rdp.h b/arch/sh/include/asm/sh7763rdp.h
deleted file mode 100644
index 8750cc85297..00000000000
--- a/arch/sh/include/asm/sh7763rdp.h
+++ /dev/null
@@ -1,54 +0,0 @@
-#ifndef __ASM_SH_SH7763RDP_H
-#define __ASM_SH_SH7763RDP_H
-
-/*
- * linux/include/asm-sh/sh7763drp.h
- *
- * Copyright (C) 2008 Renesas Solutions
- * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-#include <asm/addrspace.h>
-
-/* clock control */
-#define MSTPCR1 0xFFC80038
-
-/* PORT */
-#define PORT_PSEL0 0xFFEF0070
-#define PORT_PSEL1 0xFFEF0072
-#define PORT_PSEL2 0xFFEF0074
-#define PORT_PSEL3 0xFFEF0076
-#define PORT_PSEL4 0xFFEF0078
-
-#define PORT_PACR 0xFFEF0000
-#define PORT_PCCR 0xFFEF0004
-#define PORT_PFCR 0xFFEF000A
-#define PORT_PGCR 0xFFEF000C
-#define PORT_PHCR 0xFFEF000E
-#define PORT_PICR 0xFFEF0010
-#define PORT_PJCR 0xFFEF0012
-#define PORT_PKCR 0xFFEF0014
-#define PORT_PLCR 0xFFEF0016
-#define PORT_PMCR 0xFFEF0018
-#define PORT_PNCR 0xFFEF001A
-
-/* FPGA */
-#define CPLD_BOARD_ID_ERV_REG 0xB1000000
-#define CPLD_CPLD_CMD_REG 0xB1000006
-
-/*
- * USB SH7763RDP board can use Host only.
- */
-#define USB_USBHSC 0xFFEC80f0
-
-/* arch/sh/boards/renesas/sh7763rdp/irq.c */
-void init_sh7763rdp_IRQ(void);
-int sh7763rdp_irq_demux(int irq);
-#define __IO_PREFIX sh7763rdp
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_SH7763RDP_H */
diff --git a/arch/sh/include/asm/sh7785lcr.h b/arch/sh/include/asm/sh7785lcr.h
deleted file mode 100644
index 1ce27d5c749..00000000000
--- a/arch/sh/include/asm/sh7785lcr.h
+++ /dev/null
@@ -1,55 +0,0 @@
-#ifndef __ASM_SH_RENESAS_SH7785LCR_H
-#define __ASM_SH_RENESAS_SH7785LCR_H
-
-/*
- * This board has 2 physical memory maps.
- * It can be changed with DIP switch(S2-5).
- *
- * phys address | S2-5 = OFF | S2-5 = ON
- * -----------------------------+---------------+---------------
- * 0x00000000 - 0x03ffffff(CS0) | NOR Flash | NOR Flash
- * 0x04000000 - 0x05ffffff(CS1) | PLD | PLD
- * 0x06000000 - 0x07ffffff(CS1) | reserved | I2C
- * 0x08000000 - 0x0bffffff(CS2) | USB | DDR SDRAM
- * 0x0c000000 - 0x0fffffff(CS3) | SD | DDR SDRAM
- * 0x10000000 - 0x13ffffff(CS4) | SM107 | SM107
- * 0x14000000 - 0x17ffffff(CS5) | I2C | USB
- * 0x18000000 - 0x1bffffff(CS6) | reserved | SD
- * 0x40000000 - 0x5fffffff | DDR SDRAM | (cannot use)
- *
- */
-
-#define NOR_FLASH_ADDR 0x00000000
-#define NOR_FLASH_SIZE 0x04000000
-
-#define PLD_BASE_ADDR 0x04000000
-#define PLD_PCICR (PLD_BASE_ADDR + 0x00)
-#define PLD_LCD_BK_CONTR (PLD_BASE_ADDR + 0x02)
-#define PLD_LOCALCR (PLD_BASE_ADDR + 0x04)
-#define PLD_POFCR (PLD_BASE_ADDR + 0x06)
-#define PLD_LEDCR (PLD_BASE_ADDR + 0x08)
-#define PLD_SWSR (PLD_BASE_ADDR + 0x0a)
-#define PLD_VERSR (PLD_BASE_ADDR + 0x0c)
-#define PLD_MMSR (PLD_BASE_ADDR + 0x0e)
-
-#define SM107_MEM_ADDR 0x10000000
-#define SM107_MEM_SIZE 0x00e00000
-#define SM107_REG_ADDR 0x13e00000
-#define SM107_REG_SIZE 0x00200000
-
-#if defined(CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS)
-#define R8A66597_ADDR 0x14000000 /* USB */
-#define CG200_ADDR 0x18000000 /* SD */
-#define PCA9564_ADDR 0x06000000 /* I2C */
-#else
-#define R8A66597_ADDR 0x08000000
-#define CG200_ADDR 0x0c000000
-#define PCA9564_ADDR 0x14000000
-#endif
-
-#define R8A66597_SIZE 0x00000100
-#define CG200_SIZE 0x00010000
-#define PCA9564_SIZE 0x00000100
-
-#endif /* __ASM_SH_RENESAS_SH7785LCR_H */
-
diff --git a/arch/sh/include/asm/shmin.h b/arch/sh/include/asm/shmin.h
deleted file mode 100644
index 36ba138a81f..00000000000
--- a/arch/sh/include/asm/shmin.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __ASM_SH_SHMIN_H
-#define __ASM_SH_SHMIN_H
-
-#define SHMIN_IO_BASE 0xb0000000UL
-
-#define SHMIN_NE_IRQ IRQ2_IRQ
-#define SHMIN_NE_BASE 0x300
-
-#endif
diff --git a/arch/sh/include/asm/snapgear.h b/arch/sh/include/asm/snapgear.h
deleted file mode 100644
index 042d95f51c4..00000000000
--- a/arch/sh/include/asm/snapgear.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * include/asm-sh/snapgear.h
- *
- * Modified version of io_se.h for the snapgear-specific functions.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * IO functions for a SnapGear
- */
-
-#ifndef _ASM_SH_IO_SNAPGEAR_H
-#define _ASM_SH_IO_SNAPGEAR_H
-
-#if defined(CONFIG_CPU_SH4)
-/*
- * The external interrupt lines, these take up ints 0 - 15 inclusive
- * depending on the priority for the interrupt. In fact the priority
- * is the interrupt :-)
- */
-
-#define IRL0_IRQ 2
-#define IRL0_PRIORITY 13
-
-#define IRL1_IRQ 5
-#define IRL1_PRIORITY 10
-
-#define IRL2_IRQ 8
-#define IRL2_PRIORITY 7
-
-#define IRL3_IRQ 11
-#define IRL3_PRIORITY 4
-#endif
-
-#define __IO_PREFIX snapgear
-#include <asm/io_generic.h>
-
-#ifdef CONFIG_SH_SECUREEDGE5410
-/*
- * We need to remember what was written to the ioport as some bits
- * are shared with other functions and you cannot read back what was
- * written :-|
- *
- * Bit Read Write
- * -----------------------------------------------
- * D0 DCD on ttySC1 power
- * D1 Reset Switch heatbeat
- * D2 ttySC0 CTS (7100) LAN
- * D3 - WAN
- * D4 ttySC0 DCD (7100) CONSOLE
- * D5 - ONLINE
- * D6 - VPN
- * D7 - DTR on ttySC1
- * D8 - ttySC0 RTS (7100)
- * D9 - ttySC0 DTR (7100)
- * D10 - RTC SCLK
- * D11 RTC DATA RTC DATA
- * D12 - RTS RESET
- */
-
-#define SECUREEDGE_IOPORT_ADDR ((volatile short *) 0xb0000000)
-extern unsigned short secureedge5410_ioport;
-
-#define SECUREEDGE_WRITE_IOPORT(val, mask) (*SECUREEDGE_IOPORT_ADDR = \
- (secureedge5410_ioport = \
- ((secureedge5410_ioport & ~(mask)) | ((val) & (mask)))))
-#define SECUREEDGE_READ_IOPORT() \
- ((*SECUREEDGE_IOPORT_ADDR&0x0817) | (secureedge5410_ioport&~0x0817))
-#endif
-
-#endif /* _ASM_SH_IO_SNAPGEAR_H */
diff --git a/arch/sh/include/asm/systemh7751.h b/arch/sh/include/asm/systemh7751.h
deleted file mode 100644
index 4161122c84e..00000000000
--- a/arch/sh/include/asm/systemh7751.h
+++ /dev/null
@@ -1,71 +0,0 @@
-#ifndef __ASM_SH_SYSTEMH_7751SYSTEMH_H
-#define __ASM_SH_SYSTEMH_7751SYSTEMH_H
-
-/*
- * linux/include/asm-sh/systemh/7751systemh.h
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Hitachi SystemH support
-
- * Modified for 7751 SystemH by
- * Jonathan Short, 2002.
- */
-
-/* Box specific addresses. */
-
-#define PA_ROM 0x00000000 /* EPROM */
-#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */
-#define PA_FROM 0x01000000 /* EPROM */
-#define PA_FROM_SIZE 0x00400000 /* EPROM size 4M byte */
-#define PA_EXT1 0x04000000
-#define PA_EXT1_SIZE 0x04000000
-#define PA_EXT2 0x08000000
-#define PA_EXT2_SIZE 0x04000000
-#define PA_SDRAM 0x0c000000
-#define PA_SDRAM_SIZE 0x04000000
-
-#define PA_EXT4 0x12000000
-#define PA_EXT4_SIZE 0x02000000
-#define PA_EXT5 0x14000000
-#define PA_EXT5_SIZE 0x04000000
-#define PA_PCIC 0x18000000 /* MR-SHPC-01 PCMCIA */
-
-#define PA_DIPSW0 0xb9000000 /* Dip switch 5,6 */
-#define PA_DIPSW1 0xb9000002 /* Dip switch 7,8 */
-#define PA_LED 0xba000000 /* LED */
-#define PA_BCR 0xbb000000 /* FPGA on the MS7751SE01 */
-
-#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */
-#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */
-#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */
-#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */
-#define MRSHPC_MODE (PA_MRSHPC + 4)
-#define MRSHPC_OPTION (PA_MRSHPC + 6)
-#define MRSHPC_CSR (PA_MRSHPC + 8)
-#define MRSHPC_ISR (PA_MRSHPC + 10)
-#define MRSHPC_ICR (PA_MRSHPC + 12)
-#define MRSHPC_CPWCR (PA_MRSHPC + 14)
-#define MRSHPC_MW0CR1 (PA_MRSHPC + 16)
-#define MRSHPC_MW1CR1 (PA_MRSHPC + 18)
-#define MRSHPC_IOWCR1 (PA_MRSHPC + 20)
-#define MRSHPC_MW0CR2 (PA_MRSHPC + 22)
-#define MRSHPC_MW1CR2 (PA_MRSHPC + 24)
-#define MRSHPC_IOWCR2 (PA_MRSHPC + 26)
-#define MRSHPC_CDCR (PA_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
-
-#define BCR_ILCRA (PA_BCR + 0)
-#define BCR_ILCRB (PA_BCR + 2)
-#define BCR_ILCRC (PA_BCR + 4)
-#define BCR_ILCRD (PA_BCR + 6)
-#define BCR_ILCRE (PA_BCR + 8)
-#define BCR_ILCRF (PA_BCR + 10)
-#define BCR_ILCRG (PA_BCR + 12)
-
-#define IRQ_79C973 13
-
-#define __IO_PREFIX sh7751systemh
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_SYSTEMH_7751SYSTEMH_H */
diff --git a/arch/sh/include/asm/titan.h b/arch/sh/include/asm/titan.h
deleted file mode 100644
index 03f3583c891..00000000000
--- a/arch/sh/include/asm/titan.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Platform defintions for Titan
- */
-#ifndef _ASM_SH_TITAN_H
-#define _ASM_SH_TITAN_H
-
-#define __IO_PREFIX titan
-#include <asm/io_generic.h>
-
-/* IRQ assignments */
-#define TITAN_IRQ_WAN 2 /* eth0 (WAN) */
-#define TITAN_IRQ_LAN 5 /* eth1 (LAN) */
-#define TITAN_IRQ_MPCIA 8 /* mPCI A */
-#define TITAN_IRQ_MPCIB 11 /* mPCI B */
-#define TITAN_IRQ_USB 11 /* USB */
-
-#endif /* __ASM_SH_TITAN_H */
diff --git a/arch/sh/include/mach-common/mach/edosk7705.h b/arch/sh/include/mach-common/mach/edosk7705.h
new file mode 100644
index 00000000000..5bdc9d9be3d
--- /dev/null
+++ b/arch/sh/include/mach-common/mach/edosk7705.h
@@ -0,0 +1,30 @@
+/*
+ * include/asm-sh/edosk7705.h
+ *
+ * Modified version of io_se.h for the EDOSK7705 specific functions.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ * IO functions for an Hitachi EDOSK7705 development board
+ */
+
+#ifndef __ASM_SH_EDOSK7705_IO_H
+#define __ASM_SH_EDOSK7705_IO_H
+
+#include <asm/io_generic.h>
+
+extern unsigned char sh_edosk7705_inb(unsigned long port);
+extern unsigned int sh_edosk7705_inl(unsigned long port);
+
+extern void sh_edosk7705_outb(unsigned char value, unsigned long port);
+extern void sh_edosk7705_outl(unsigned int value, unsigned long port);
+
+extern void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count);
+extern void sh_edosk7705_insl(unsigned long port, void *addr, unsigned long count);
+extern void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count);
+extern void sh_edosk7705_outsl(unsigned long port, const void *addr, unsigned long count);
+
+extern unsigned long sh_edosk7705_isa_port2addr(unsigned long offset);
+
+#endif /* __ASM_SH_EDOSK7705_IO_H */
diff --git a/arch/sh/include/mach-common/mach/highlander.h b/arch/sh/include/mach-common/mach/highlander.h
new file mode 100644
index 00000000000..306f7359f7d
--- /dev/null
+++ b/arch/sh/include/mach-common/mach/highlander.h
@@ -0,0 +1,198 @@
+#ifndef __ASM_SH_RENESAS_R7780RP_H
+#define __ASM_SH_RENESAS_R7780RP_H
+
+/* Box specific addresses. */
+#if defined(CONFIG_SH_R7780MP)
+#define PA_BCR 0xa4000000 /* FPGA */
+#define PA_SDPOW (-1)
+
+#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */
+#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */
+#define PA_IRLPRI1 (PA_BCR+0x0004) /* Interrupt Priorty 1 */
+#define PA_IRLPRI2 (PA_BCR+0x0006) /* Interrupt Priorty 2 */
+#define PA_IRLPRI3 (PA_BCR+0x0008) /* Interrupt Priorty 3 */
+#define PA_IRLPRI4 (PA_BCR+0x000a) /* Interrupt Priorty 4 */
+#define PA_RSTCTL (PA_BCR+0x000c) /* Reset Control */
+#define PA_PCIBD (PA_BCR+0x000e) /* PCI Board detect control */
+#define PA_PCICD (PA_BCR+0x0010) /* PCI Conector detect control */
+#define PA_EXTGIO (PA_BCR+0x0016) /* Extension GPIO Control */
+#define PA_IVDRMON (PA_BCR+0x0018) /* iVDR Moniter control */
+#define PA_IVDRCTL (PA_BCR+0x001a) /* iVDR control */
+#define PA_OBLED (PA_BCR+0x001c) /* On Board LED control */
+#define PA_OBSW (PA_BCR+0x001e) /* On Board Switch control */
+#define PA_AUDIOSEL (PA_BCR+0x0020) /* Sound Interface Select control */
+#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */
+#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */
+#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */
+#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */
+#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */
+#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */
+#define PA_DBSW (PA_BCR+0x0200) /* Debug Board Switch control */
+#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */
+#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */
+#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */
+#define PA_SCSMR0 (PA_BCR+0x0400) /* SCIF0 Serial mode control */
+#define PA_SCBRR0 (PA_BCR+0x0404) /* SCIF0 Bit rate control */
+#define PA_SCSCR0 (PA_BCR+0x0408) /* SCIF0 Serial control */
+#define PA_SCFTDR0 (PA_BCR+0x040c) /* SCIF0 Send FIFO control */
+#define PA_SCFSR0 (PA_BCR+0x0410) /* SCIF0 Serial status control */
+#define PA_SCFRDR0 (PA_BCR+0x0414) /* SCIF0 Receive FIFO control */
+#define PA_SCFCR0 (PA_BCR+0x0418) /* SCIF0 FIFO control */
+#define PA_SCTFDR0 (PA_BCR+0x041c) /* SCIF0 Send FIFO data control */
+#define PA_SCRFDR0 (PA_BCR+0x0420) /* SCIF0 Receive FIFO data control */
+#define PA_SCSPTR0 (PA_BCR+0x0424) /* SCIF0 Serial Port control */
+#define PA_SCLSR0 (PA_BCR+0x0428) /* SCIF0 Line Status control */
+#define PA_SCRER0 (PA_BCR+0x042c) /* SCIF0 Serial Error control */
+#define PA_SCSMR1 (PA_BCR+0x0500) /* SCIF1 Serial mode control */
+#define PA_SCBRR1 (PA_BCR+0x0504) /* SCIF1 Bit rate control */
+#define PA_SCSCR1 (PA_BCR+0x0508) /* SCIF1 Serial control */
+#define PA_SCFTDR1 (PA_BCR+0x050c) /* SCIF1 Send FIFO control */
+#define PA_SCFSR1 (PA_BCR+0x0510) /* SCIF1 Serial status control */
+#define PA_SCFRDR1 (PA_BCR+0x0514) /* SCIF1 Receive FIFO control */
+#define PA_SCFCR1 (PA_BCR+0x0518) /* SCIF1 FIFO control */
+#define PA_SCTFDR1 (PA_BCR+0x051c) /* SCIF1 Send FIFO data control */
+#define PA