From e61f487fd596ce570e87ccfdc0a7fc9fa87aced9 Mon Sep 17 00:00:00 2001 From: "Chew, Chiau Ee" Date: Fri, 13 Jun 2014 23:57:25 +0800 Subject: spi/pxa2xx: fix incorrect SW mode chipselect setting for BayTrail LPSS SPI It was observed that after module removal followed by insertion, the SW mode chipselect is not properly set. Thus causing transfer failure due to incorrect CS toggling. Signed-off-by: Chew, Chiau Ee Acked-by: Mika Westerberg Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index a98df7eeb42..fe792106bdc 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -118,6 +118,7 @@ static void lpss_ssp_setup(struct driver_data *drv_data) */ orig = readl(drv_data->ioaddr + offset + SPI_CS_CONTROL); + /* Test SPI_CS_CONTROL_SW_MODE bit enabling */ value = orig | SPI_CS_CONTROL_SW_MODE; writel(value, drv_data->ioaddr + offset + SPI_CS_CONTROL); value = readl(drv_data->ioaddr + offset + SPI_CS_CONTROL); @@ -126,10 +127,13 @@ static void lpss_ssp_setup(struct driver_data *drv_data) goto detection_done; } - value &= ~SPI_CS_CONTROL_SW_MODE; + orig = readl(drv_data->ioaddr + offset + SPI_CS_CONTROL); + + /* Test SPI_CS_CONTROL_SW_MODE bit disabling */ + value = orig & ~SPI_CS_CONTROL_SW_MODE; writel(value, drv_data->ioaddr + offset + SPI_CS_CONTROL); value = readl(drv_data->ioaddr + offset + SPI_CS_CONTROL); - if (value != orig) { + if (value != (orig & ~SPI_CS_CONTROL_SW_MODE)) { offset = 0x800; goto detection_done; } -- cgit v1.2.3-18-g5258 From 25f8a7cc5856f1c697c9aee88b0a898fcb6d788c Mon Sep 17 00:00:00 2001 From: Jürg Billeter Date: Mon, 16 Jun 2014 16:39:29 +0200 Subject: spi: sh-sci: fix use-after-free in sh_sci_spi_remove() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit setbits() uses sp->membase. Signed-off-by: Jürg Billeter Acked-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- drivers/spi/spi-sh-sci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-sh-sci.c b/drivers/spi/spi-sh-sci.c index 1f56ef651d1..b83dd733684 100644 --- a/drivers/spi/spi-sh-sci.c +++ b/drivers/spi/spi-sh-sci.c @@ -175,9 +175,9 @@ static int sh_sci_spi_remove(struct platform_device *dev) { struct sh_sci_spi *sp = platform_get_drvdata(dev); - iounmap(sp->membase); - setbits(sp, PIN_INIT, 0); spi_bitbang_stop(&sp->bitbang); + setbits(sp, PIN_INIT, 0); + iounmap(sp->membase); spi_master_put(sp->bitbang.master); return 0; } -- cgit v1.2.3-18-g5258 From 045c243a511c8b688d36659cc3f781e84e9c2ddb Mon Sep 17 00:00:00 2001 From: Andy Gross Date: Thu, 12 Jun 2014 14:34:11 -0500 Subject: spi: qup: Fix order of spi_register_master This patch moves the devm_spi_register_master below the initialization of the runtime_pm. If done in the wrong order, the spi_register_master fails if any probed slave devices issue SPI transactions. Signed-off-by: Andy Gross Acked-by: Ivan T. Ivanov Signed-off-by: Mark Brown --- drivers/spi/spi-qup.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c index fc1de86d3c8..e783e4ce2cd 100644 --- a/drivers/spi/spi-qup.c +++ b/drivers/spi/spi-qup.c @@ -640,16 +640,19 @@ static int spi_qup_probe(struct platform_device *pdev) if (ret) goto error; - ret = devm_spi_register_master(dev, master); - if (ret) - goto error; - pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC); pm_runtime_use_autosuspend(dev); pm_runtime_set_active(dev); pm_runtime_enable(dev); + + ret = devm_spi_register_master(dev, master); + if (ret) + goto disable_pm; + return 0; +disable_pm: + pm_runtime_disable(&pdev->dev); error: clk_disable_unprepare(cclk); clk_disable_unprepare(iclk); -- cgit v1.2.3-18-g5258 From 4a8573abe965115bc5b064401fd669b74e985258 Mon Sep 17 00:00:00 2001 From: Andy Gross Date: Thu, 12 Jun 2014 14:34:10 -0500 Subject: spi: qup: Remove chip select function This patch removes the chip select function. Chip select should instead be supported using GPIOs, defining the DT entry "cs-gpios", and letting the SPI core assert/deassert the chip select as it sees fit. The chip select control inside the controller is buggy. It is supposed to automatically assert the chip select based on the activity in the controller, but it is buggy and doesn't work at all. So instead we elect to use GPIOs. Signed-off-by: Andy Gross Signed-off-by: Mark Brown --- .../devicetree/bindings/spi/qcom,spi-qup.txt | 6 ++++ drivers/spi/spi-qup.c | 33 ++++------------------ 2 files changed, 12 insertions(+), 27 deletions(-) diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt index b82a268f1bd..bee6ff204ba 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt @@ -23,6 +23,12 @@ Optional properties: - spi-max-frequency: Specifies maximum SPI clock frequency, Units - Hz. Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt +- num-cs: total number of chipselects +- cs-gpios: should specify GPIOs used for chipselects. + The gpios will be referred to as reg = in the SPI child + nodes. If unspecified, a single SPI device without a chip + select can be used. + SPI slave nodes must be children of the SPI master node and can contain properties described in Documentation/devicetree/bindings/spi/spi-bus.txt diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c index e783e4ce2cd..c08da380cb2 100644 --- a/drivers/spi/spi-qup.c +++ b/drivers/spi/spi-qup.c @@ -424,31 +424,6 @@ static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer) return 0; } -static void spi_qup_set_cs(struct spi_device *spi, bool enable) -{ - struct spi_qup *controller = spi_master_get_devdata(spi->master); - - u32 iocontol, mask; - - iocontol = readl_relaxed(controller->base + SPI_IO_CONTROL); - - /* Disable auto CS toggle and use manual */ - iocontol &= ~SPI_IO_C_MX_CS_MODE; - iocontol |= SPI_IO_C_FORCE_CS; - - iocontol &= ~SPI_IO_C_CS_SELECT_MASK; - iocontol |= SPI_IO_C_CS_SELECT(spi->chip_select); - - mask = SPI_IO_C_CS_N_POLARITY_0 << spi->chip_select; - - if (enable) - iocontol |= mask; - else - iocontol &= ~mask; - - writel_relaxed(iocontol, controller->base + SPI_IO_CONTROL); -} - static int spi_qup_transfer_one(struct spi_master *master, struct spi_device *spi, struct spi_transfer *xfer) @@ -571,12 +546,16 @@ static int spi_qup_probe(struct platform_device *pdev) return -ENOMEM; } + /* use num-cs unless not present or out of range */ + if (of_property_read_u16(dev->of_node, "num-cs", + &master->num_chipselect) || + (master->num_chipselect > SPI_NUM_CHIPSELECTS)) + master->num_chipselect = SPI_NUM_CHIPSELECTS; + master->bus_num = pdev->id; master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP; - master->num_chipselect = SPI_NUM_CHIPSELECTS; master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32); master->max_speed_hz = max_freq; - master->set_cs = spi_qup_set_cs; master->transfer_one = spi_qup_transfer_one; master->dev.of_node = pdev->dev.of_node; master->auto_runtime_pm = true; -- cgit v1.2.3-18-g5258