From 6518bb69f463446a1552f52093cc699497f18fe0 Mon Sep 17 00:00:00 2001 From: Martyn Welch <martyn.welch@ge.com> Date: Mon, 12 Mar 2012 17:12:58 +0000 Subject: gpio: Move GE GPIO driver to reside within GPIO subsystem The GE GPIO driver provides basic support (set direction, read/write state) for the GPIO provided on some GE single board computers. This patch moves the driver from the 86xx specific platform directrory to the GPIO subsystem so that it can be used on non-86xx boards. Signed-off-by: Martyn Welch <martyn.welch@ge.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/configs/86xx/gef_ppc9a_defconfig | 1 + arch/powerpc/configs/86xx/gef_sbc310_defconfig | 1 + arch/powerpc/configs/86xx/gef_sbc610_defconfig | 2 + arch/powerpc/platforms/86xx/Makefile | 3 +- arch/powerpc/platforms/86xx/gef_gpio.c | 171 ------------------------- drivers/gpio/Kconfig | 11 ++ drivers/gpio/Makefile | 1 + drivers/gpio/gpio-ge.c | 171 +++++++++++++++++++++++++ 8 files changed, 188 insertions(+), 173 deletions(-) delete mode 100644 arch/powerpc/platforms/86xx/gef_gpio.c create mode 100644 drivers/gpio/gpio-ge.c diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig index d41857a5152..da731c2fe98 100644 --- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig +++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig @@ -131,6 +131,7 @@ CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_MPC=y CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_GE_FPGA=y CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM92=y CONFIG_WATCHDOG=y diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig index 38303ec11bc..2149360a1e6 100644 --- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig @@ -132,6 +132,7 @@ CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_MPC=y CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_GE_FPGA=y CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM92=y CONFIG_WATCHDOG=y diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig index 98533973d20..af2e8e1edba 100644 --- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig @@ -183,6 +183,8 @@ CONFIG_NVRAM=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_MPC=y +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_GE_FPGA=y CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM92=y CONFIG_WATCHDOG=y diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile index ac6a50fdd1d..1ee6ca8e53f 100644 --- a/arch/powerpc/platforms/86xx/Makefile +++ b/arch/powerpc/platforms/86xx/Makefile @@ -7,8 +7,7 @@ obj-$(CONFIG_SMP) += mpc86xx_smp.o obj-$(CONFIG_MPC8641_HPCN) += mpc86xx_hpcn.o obj-$(CONFIG_SBC8641D) += sbc8641d.o obj-$(CONFIG_MPC8610_HPCD) += mpc8610_hpcd.o -gef-gpio-$(CONFIG_GPIOLIB) += gef_gpio.o -obj-$(CONFIG_GE_FPGA) += gef_pic.o $(gef-gpio-y) +obj-$(CONFIG_GE_FPGA) += gef_pic.o obj-$(CONFIG_GEF_SBC610) += gef_sbc610.o obj-$(CONFIG_GEF_SBC310) += gef_sbc310.o obj-$(CONFIG_GEF_PPC9A) += gef_ppc9a.o diff --git a/arch/powerpc/platforms/86xx/gef_gpio.c b/arch/powerpc/platforms/86xx/gef_gpio.c deleted file mode 100644 index 2a703365e66..00000000000 --- a/arch/powerpc/platforms/86xx/gef_gpio.c +++ /dev/null @@ -1,171 +0,0 @@ -/* - * Driver for GE FPGA based GPIO - * - * Author: Martyn Welch <martyn.welch@ge.com> - * - * 2008 (c) GE Intelligent Platforms Embedded Systems, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/* TODO - * - * Configuration of output modes (totem-pole/open-drain) - * Interrupt configuration - interrupts are always generated the FPGA relies on - * the I/O interrupt controllers mask to stop them propergating - */ - -#include <linux/kernel.h> -#include <linux/compiler.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/of.h> -#include <linux/of_device.h> -#include <linux/of_platform.h> -#include <linux/of_gpio.h> -#include <linux/gpio.h> -#include <linux/slab.h> -#include <linux/module.h> - -#define GEF_GPIO_DIRECT 0x00 -#define GEF_GPIO_IN 0x04 -#define GEF_GPIO_OUT 0x08 -#define GEF_GPIO_TRIG 0x0C -#define GEF_GPIO_POLAR_A 0x10 -#define GEF_GPIO_POLAR_B 0x14 -#define GEF_GPIO_INT_STAT 0x18 -#define GEF_GPIO_OVERRUN 0x1C -#define GEF_GPIO_MODE 0x20 - -static void _gef_gpio_set(void __iomem *reg, unsigned int offset, int value) -{ - unsigned int data; - - data = ioread32be(reg); - /* value: 0=low; 1=high */ - if (value & 0x1) - data = data | (0x1 << offset); - else - data = data & ~(0x1 << offset); - - iowrite32be(data, reg); -} - - -static int gef_gpio_dir_in(struct gpio_chip *chip, unsigned offset) -{ - unsigned int data; - struct of_mm_gpio_chip *mmchip = to_of_mm_gpio_chip(chip); - - data = ioread32be(mmchip->regs + GEF_GPIO_DIRECT); - data = data | (0x1 << offset); - iowrite32be(data, mmchip->regs + GEF_GPIO_DIRECT); - - return 0; -} - -static int gef_gpio_dir_out(struct gpio_chip *chip, unsigned offset, int value) -{ - unsigned int data; - struct of_mm_gpio_chip *mmchip = to_of_mm_gpio_chip(chip); - - /* Set direction before switching to input */ - _gef_gpio_set(mmchip->regs + GEF_GPIO_OUT, offset, value); - - data = ioread32be(mmchip->regs + GEF_GPIO_DIRECT); - data = data & ~(0x1 << offset); - iowrite32be(data, mmchip->regs + GEF_GPIO_DIRECT); - - return 0; -} - -static int gef_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - unsigned int data; - int state = 0; - struct of_mm_gpio_chip *mmchip = to_of_mm_gpio_chip(chip); - - data = ioread32be(mmchip->regs + GEF_GPIO_IN); - state = (int)((data >> offset) & 0x1); - - return state; -} - -static void gef_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - struct of_mm_gpio_chip *mmchip = to_of_mm_gpio_chip(chip); - - _gef_gpio_set(mmchip->regs + GEF_GPIO_OUT, offset, value); -} - -static int __init gef_gpio_init(void) -{ - struct device_node *np; - int retval; - struct of_mm_gpio_chip *gef_gpio_chip; - - for_each_compatible_node(np, NULL, "gef,sbc610-gpio") { - - pr_debug("%s: Initialising GEF GPIO\n", np->full_name); - - /* Allocate chip structure */ - gef_gpio_chip = kzalloc(sizeof(*gef_gpio_chip), GFP_KERNEL); - if (!gef_gpio_chip) { - pr_err("%s: Unable to allocate structure\n", - np->full_name); - continue; - } - - /* Setup pointers to chip functions */ - gef_gpio_chip->gc.of_gpio_n_cells = 2; - gef_gpio_chip->gc.ngpio = 19; - gef_gpio_chip->gc.direction_input = gef_gpio_dir_in; - gef_gpio_chip->gc.direction_output = gef_gpio_dir_out; - gef_gpio_chip->gc.get = gef_gpio_get; - gef_gpio_chip->gc.set = gef_gpio_set; - - /* This function adds a memory mapped GPIO chip */ - retval = of_mm_gpiochip_add(np, gef_gpio_chip); - if (retval) { - kfree(gef_gpio_chip); - pr_err("%s: Unable to add GPIO\n", np->full_name); - } - } - - for_each_compatible_node(np, NULL, "gef,sbc310-gpio") { - - pr_debug("%s: Initialising GEF GPIO\n", np->full_name); - - /* Allocate chip structure */ - gef_gpio_chip = kzalloc(sizeof(*gef_gpio_chip), GFP_KERNEL); - if (!gef_gpio_chip) { - pr_err("%s: Unable to allocate structure\n", - np->full_name); - continue; - } - - /* Setup pointers to chip functions */ - gef_gpio_chip->gc.of_gpio_n_cells = 2; - gef_gpio_chip->gc.ngpio = 6; - gef_gpio_chip->gc.direction_input = gef_gpio_dir_in; - gef_gpio_chip->gc.direction_output = gef_gpio_dir_out; - gef_gpio_chip->gc.get = gef_gpio_get; - gef_gpio_chip->gc.set = gef_gpio_set; - - /* This function adds a memory mapped GPIO chip */ - retval = of_mm_gpiochip_add(np, gef_gpio_chip); - if (retval) { - kfree(gef_gpio_chip); - pr_err("%s: Unable to add GPIO\n", np->full_name); - } - } - - return 0; -}; -arch_initcall(gef_gpio_init); - -MODULE_DESCRIPTION("GE I/O FPGA GPIO driver"); -MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com"); -MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index d0c41188d4e..0409cf35add 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -190,6 +190,17 @@ config GPIO_VX855 additional drivers must be enabled in order to use the functionality of the device. +config GPIO_GE_FPGA + bool "GE FPGA based GPIO" + depends on GE_FPGA + help + Support for common GPIO functionality provided on some GE Single Board + Computers. + + This driver provides basic support (configure as input or output, read + and write pin state) for GPIO implemented in a number of GE single + board computers. + comment "I2C GPIO expanders:" config GPIO_MAX7300 diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index fa10df604c0..9a8fb54ae46 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o obj-$(CONFIG_ARCH_DAVINCI) += gpio-davinci.o obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o +obj-$(CONFIG_GPIO_GE_FPGA) += gpio-ge.o obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o diff --git a/drivers/gpio/gpio-ge.c b/drivers/gpio/gpio-ge.c new file mode 100644 index 00000000000..f8e62895292 --- /dev/null +++ b/drivers/gpio/gpio-ge.c @@ -0,0 +1,171 @@ +/* + * Driver for GE FPGA based GPIO + * + * Author: Martyn Welch <martyn.welch@ge.com> + * + * 2008 (c) GE Intelligent Platforms Embedded Systems, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/* TODO + * + * Configuration of output modes (totem-pole/open-drain) + * Interrupt configuration - interrupts are always generated the FPGA relies on + * the I/O interrupt controllers mask to stop them propergating + */ + +#include <linux/kernel.h> +#include <linux/compiler.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_platform.h> +#include <linux/of_gpio.h> +#include <linux/gpio.h> +#include <linux/slab.h> +#include <linux/module.h> + +#define GEF_GPIO_DIRECT 0x00 +#define GEF_GPIO_IN 0x04 +#define GEF_GPIO_OUT 0x08 +#define GEF_GPIO_TRIG 0x0C +#define GEF_GPIO_POLAR_A 0x10 +#define GEF_GPIO_POLAR_B 0x14 +#define GEF_GPIO_INT_STAT 0x18 +#define GEF_GPIO_OVERRUN 0x1C +#define GEF_GPIO_MODE 0x20 + +static void _gef_gpio_set(void __iomem *reg, unsigned int offset, int value) +{ + unsigned int data; + + data = ioread32be(reg); + /* value: 0=low; 1=high */ + if (value & 0x1) + data = data | (0x1 << offset); + else + data = data & ~(0x1 << offset); + + iowrite32be(data, reg); +} + + +static int gef_gpio_dir_in(struct gpio_chip *chip, unsigned offset) +{ + unsigned int data; + struct of_mm_gpio_chip *mmchip = to_of_mm_gpio_chip(chip); + + data = ioread32be(mmchip->regs + GEF_GPIO_DIRECT); + data = data | (0x1 << offset); + iowrite32be(data, mmchip->regs + GEF_GPIO_DIRECT); + + return 0; +} + +static int gef_gpio_dir_out(struct gpio_chip *chip, unsigned offset, int value) +{ + unsigned int data; + struct of_mm_gpio_chip *mmchip = to_of_mm_gpio_chip(chip); + + /* Set direction before switching to input */ + _gef_gpio_set(mmchip->regs + GEF_GPIO_OUT, offset, value); + + data = ioread32be(mmchip->regs + GEF_GPIO_DIRECT); + data = data & ~(0x1 << offset); + iowrite32be(data, mmchip->regs + GEF_GPIO_DIRECT); + + return 0; +} + +static int gef_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + unsigned int data; + int state = 0; + struct of_mm_gpio_chip *mmchip = to_of_mm_gpio_chip(chip); + + data = ioread32be(mmchip->regs + GEF_GPIO_IN); + state = (int)((data >> offset) & 0x1); + + return state; +} + +static void gef_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct of_mm_gpio_chip *mmchip = to_of_mm_gpio_chip(chip); + + _gef_gpio_set(mmchip->regs + GEF_GPIO_OUT, offset, value); +} + +static int __init gef_gpio_init(void) +{ + struct device_node *np; + int retval; + struct of_mm_gpio_chip *gef_gpio_chip; + + for_each_compatible_node(np, NULL, "gef,sbc610-gpio") { + + pr_debug("%s: Initialising GEF GPIO\n", np->full_name); + + /* Allocate chip structure */ + gef_gpio_chip = kzalloc(sizeof(*gef_gpio_chip), GFP_KERNEL); + if (!gef_gpio_chip) { + pr_err("%s: Unable to allocate structure\n", + np->full_name); + continue; + } + + /* Setup pointers to chip functions */ + gef_gpio_chip->gc.of_gpio_n_cells = 2; + gef_gpio_chip->gc.ngpio = 19; + gef_gpio_chip->gc.direction_input = gef_gpio_dir_in; + gef_gpio_chip->gc.direction_output = gef_gpio_dir_out; + gef_gpio_chip->gc.get = gef_gpio_get; + gef_gpio_chip->gc.set = gef_gpio_set; + + /* This function adds a memory mapped GPIO chip */ + retval = of_mm_gpiochip_add(np, gef_gpio_chip); + if (retval) { + kfree(gef_gpio_chip); + pr_err("%s: Unable to add GPIO\n", np->full_name); + } + } + + for_each_compatible_node(np, NULL, "gef,sbc310-gpio") { + + pr_debug("%s: Initialising GEF GPIO\n", np->full_name); + + /* Allocate chip structure */ + gef_gpio_chip = kzalloc(sizeof(*gef_gpio_chip), GFP_KERNEL); + if (!gef_gpio_chip) { + pr_err("%s: Unable to allocate structure\n", + np->full_name); + continue; + } + + /* Setup pointers to chip functions */ + gef_gpio_chip->gc.of_gpio_n_cells = 2; + gef_gpio_chip->gc.ngpio = 6; + gef_gpio_chip->gc.direction_input = gef_gpio_dir_in; + gef_gpio_chip->gc.direction_output = gef_gpio_dir_out; + gef_gpio_chip->gc.get = gef_gpio_get; + gef_gpio_chip->gc.set = gef_gpio_set; + + /* This function adds a memory mapped GPIO chip */ + retval = of_mm_gpiochip_add(np, gef_gpio_chip); + if (retval) { + kfree(gef_gpio_chip); + pr_err("%s: Unable to add GPIO\n", np->full_name); + } + } + + return 0; +}; +arch_initcall(gef_gpio_init); + +MODULE_DESCRIPTION("GE I/O FPGA GPIO driver"); +MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3-18-g5258