From 594c16d8dd54cd7b1c5ef1ec3ac0f6bf34301dad Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:58 +0200 Subject: ide: add ide_transfer_pc() helper * Add ide-atapi.c file for generic ATAPI support together with CONFIG_IDE_ATAPI config option. * Add generic ide_transfer_pc() helper to ide-atapi.c and then convert ide-{floppy,tape,scsi} device drivers to use it. There should be no functional changes caused by this patch. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 6 +++++ drivers/ide/Makefile | 1 + drivers/ide/ide-atapi.c | 70 ++++++++++++++++++++++++++++++++++++++++++++++++ drivers/ide/ide-floppy.c | 28 +------------------ drivers/ide/ide-tape.c | 56 ++------------------------------------ drivers/scsi/ide-scsi.c | 30 ++------------------- include/linux/ide.h | 3 +++ 7 files changed, 85 insertions(+), 109 deletions(-) create mode 100644 drivers/ide/ide-atapi.c diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 1607536ff5f..cf707c8f08d 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -98,6 +98,9 @@ if BLK_DEV_IDE comment "Please see Documentation/ide/ide.txt for help/info on IDE drives" +config IDE_ATAPI + bool + config BLK_DEV_IDE_SATA bool "Support for SATA (deprecated; conflicts with libata SATA driver)" default n @@ -201,6 +204,7 @@ config BLK_DEV_IDECD_VERBOSE_ERRORS config BLK_DEV_IDETAPE tristate "Include IDE/ATAPI TAPE support" + select IDE_ATAPI help If you have an IDE tape drive using the ATAPI protocol, say Y. ATAPI is a newer protocol used by IDE tape and CD-ROM drives, @@ -223,6 +227,7 @@ config BLK_DEV_IDETAPE config BLK_DEV_IDEFLOPPY tristate "Include IDE/ATAPI FLOPPY support" + select IDE_ATAPI ---help--- If you have an IDE floppy drive which uses the ATAPI protocol, answer Y. ATAPI is a newer protocol used by IDE CD-ROM/tape/floppy @@ -246,6 +251,7 @@ config BLK_DEV_IDEFLOPPY config BLK_DEV_IDESCSI tristate "SCSI emulation support" depends on SCSI + select IDE_ATAPI ---help--- WARNING: ide-scsi is no longer needed for cd writing applications! The 2.6 kernel supports direct writing to ide-cd, which eliminates diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index f94b679b611..a2b3f84d710 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -14,6 +14,7 @@ EXTRA_CFLAGS += -Idrivers/ide ide-core-y += ide.o ide-io.o ide-iops.o ide-lib.o ide-probe.o ide-taskfile.o # core IDE code +ide-core-$(CONFIG_IDE_ATAPI) += ide-atapi.o ide-core-$(CONFIG_BLK_DEV_IDEPCI) += setup-pci.o ide-core-$(CONFIG_BLK_DEV_IDEDMA) += ide-dma.o ide-core-$(CONFIG_IDE_PROC_FS) += ide-proc.o diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c new file mode 100644 index 00000000000..25939bc6040 --- /dev/null +++ b/drivers/ide/ide-atapi.c @@ -0,0 +1,70 @@ +/* + * ATAPI support. + */ + +#include +#include +#include + +static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason) +{ + ide_hwif_t *hwif = drive->hwif; + int retries = 100; + + while (retries-- && ((ireason & CD) == 0 || (ireason & IO))) { + printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing " + "a packet command, retrying\n", drive->name); + udelay(100); + ireason = hwif->INB(hwif->io_ports.nsect_addr); + if (retries == 0) { + printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing " + "a packet command, ignoring\n", + drive->name); + ireason |= CD; + ireason &= ~IO; + } + } + + return ireason; +} + +ide_startstop_t ide_transfer_pc(ide_drive_t *drive, struct ide_atapi_pc *pc, + ide_handler_t *handler, unsigned int timeout, + ide_expiry_t *expiry) +{ + ide_hwif_t *hwif = drive->hwif; + ide_startstop_t startstop; + u8 ireason; + + if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) { + printk(KERN_ERR "%s: Strange, packet command initiated yet " + "DRQ isn't asserted\n", drive->name); + return startstop; + } + + ireason = hwif->INB(hwif->io_ports.nsect_addr); + if (drive->media == ide_tape && !drive->scsi) + ireason = ide_wait_ireason(drive, ireason); + + if ((ireason & CD) == 0 || (ireason & IO)) { + printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing " + "a packet command\n", drive->name); + return ide_do_reset(drive); + } + + /* Set the interrupt routine */ + ide_set_handler(drive, handler, timeout, expiry); + + /* Begin DMA, if necessary */ + if (pc->flags & PC_FLAG_DMA_OK) { + pc->flags |= PC_FLAG_DMA_IN_PROGRESS; + hwif->dma_ops->dma_start(drive); + } + + /* Send the actual packet */ + if ((pc->flags & PC_FLAG_ZIP_DRIVE) == 0) + hwif->output_data(drive, NULL, pc->c, 12); + + return ide_started; +} +EXPORT_SYMBOL_GPL(ide_transfer_pc); diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index a7c138dc324..e7a1025c03c 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -532,25 +532,11 @@ static int idefloppy_transfer_pc2(ide_drive_t *drive) static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; idefloppy_floppy_t *floppy = drive->driver_data; struct ide_atapi_pc *pc = floppy->pc; ide_expiry_t *expiry; unsigned int timeout; - ide_startstop_t startstop; - u8 ireason; - if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) { - printk(KERN_ERR "%s: Strange, packet command initiated yet " - "DRQ isn't asserted\n", drive->name); - return startstop; - } - ireason = hwif->INB(hwif->io_ports.nsect_addr); - if ((ireason & CD) == 0 || (ireason & IO)) { - printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing " - "a packet command\n", drive->name); - return ide_do_reset(drive); - } /* * The following delay solves a problem with ATAPI Zip 100 drives * where the Busy flag was apparently being deasserted before the @@ -567,19 +553,7 @@ static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive) expiry = NULL; } - ide_set_handler(drive, &idefloppy_pc_intr, timeout, expiry); - - /* Begin DMA, if necessary */ - if (pc->flags & PC_FLAG_DMA_OK) { - pc->flags |= PC_FLAG_DMA_IN_PROGRESS; - hwif->dma_ops->dma_start(drive); - } - - if ((pc->flags & PC_FLAG_ZIP_DRIVE) == 0) - /* Send the actual packet */ - hwif->output_data(drive, NULL, floppy->pc->c, 12); - - return ide_started; + return ide_transfer_pc(drive, pc, idefloppy_pc_intr, timeout, expiry); } static void ide_floppy_report_error(idefloppy_floppy_t *floppy, diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 2a362138f97..5adc2c9ae41 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -947,64 +947,12 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) * again, the callback function will be called and then we will handle the next * request. */ - -static u8 ide_tape_wait_ireason(ide_drive_t *drive, u8 ireason) -{ - ide_hwif_t *hwif = drive->hwif; - int retries = 100; - - while (retries-- && ((ireason & CD) == 0 || (ireason & IO))) { - printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing " - "a packet command, retrying\n", drive->name); - udelay(100); - ireason = hwif->INB(hwif->io_ports.nsect_addr); - if (retries == 0) { - printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing " - "a packet command, ignoring\n", - drive->name); - ireason |= CD; - ireason &= ~IO; - } - } - - return ireason; -} - static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; idetape_tape_t *tape = drive->driver_data; - struct ide_atapi_pc *pc = tape->pc; - ide_startstop_t startstop; - u8 ireason; - - if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) { - printk(KERN_ERR "%s: Strange, packet command initiated yet " - "DRQ isn't asserted\n", drive->name); - return startstop; - } - - ireason = hwif->INB(hwif->io_ports.nsect_addr); - ireason = ide_tape_wait_ireason(drive, ireason); - if ((ireason & CD) == 0 || (ireason & IO)) { - printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing " - "a packet command\n", drive->name); - return ide_do_reset(drive); - } - /* Set the interrupt routine */ - ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL); - - /* Begin DMA, if necessary */ - if (pc->flags & PC_FLAG_DMA_OK) { - pc->flags |= PC_FLAG_DMA_IN_PROGRESS; - hwif->dma_ops->dma_start(drive); - } - - /* Send the actual packet */ - hwif->output_data(drive, NULL, pc->c, 12); - - return ide_started; + return ide_transfer_pc(drive, tape->pc, idetape_pc_intr, + IDETAPE_WAIT_CMD, NULL); } static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index c9fdf60c9dc..d41348f2245 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -453,36 +453,10 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) static ide_startstop_t idescsi_transfer_pc(ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; idescsi_scsi_t *scsi = drive_to_idescsi(drive); - struct ide_atapi_pc *pc = scsi->pc; - ide_startstop_t startstop; - u8 ireason; - - if (ide_wait_stat(&startstop,drive,DRQ_STAT,BUSY_STAT,WAIT_READY)) { - printk(KERN_ERR "%s: Strange, packet command initiated yet " - "DRQ isn't asserted\n", drive->name); - return startstop; - } - ireason = hwif->INB(hwif->io_ports.nsect_addr); - if ((ireason & CD) == 0 || (ireason & IO)) { - printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing " - "a packet command\n", drive->name); - return ide_do_reset (drive); - } - /* Set the interrupt routine */ - ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry); - - if (pc->flags & PC_FLAG_DMA_OK) { - pc->flags |= PC_FLAG_DMA_IN_PROGRESS; - hwif->dma_ops->dma_start(drive); - } - - /* Send the actual packet */ - hwif->output_data(drive, NULL, scsi->pc->c, 12); - - return ide_started; + return ide_transfer_pc(drive, scsi->pc, idescsi_pc_intr, + get_timeout(scsi->pc), idescsi_expiry); } static inline int idescsi_set_direction(struct ide_atapi_pc *pc) diff --git a/include/linux/ide.h b/include/linux/ide.h index 89feaea9e20..bed3c58798a 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -967,6 +967,9 @@ extern int drive_is_ready(ide_drive_t *); void ide_pktcmd_tf_load(ide_drive_t *, u32, u16, u8); +ide_startstop_t ide_transfer_pc(ide_drive_t *, struct ide_atapi_pc *, + ide_handler_t *, unsigned int, ide_expiry_t *); + ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *); void task_end_request(ide_drive_t *, struct request *, u8); -- cgit v1.2.3-18-g5258