From cd6e9db27728e8bcf98cb667996b121761f58121 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Fri, 11 Oct 2013 19:15:31 +0300 Subject: ARM: OMAP2: CM/PM: remove direct register accesses outside CM code Users of the CM funtionality should not access the CM registers directly by themselves. Thus, added new CM driver APIs for the OMAP2 specific functionalities which support the existing direct register accesses, and changed the platform code to use these. This is done in preparation for moving the CM code into its own individual driver. Signed-off-by: Tero Kristo Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clkt2xxx_apll.c | 4 +- arch/arm/mach-omap2/clkt2xxx_dpllcore.c | 11 ++--- arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c | 24 +++------- arch/arm/mach-omap2/cm2xxx.c | 67 ++++++++++++++++++++++++++++ arch/arm/mach-omap2/cm2xxx.h | 8 ++++ arch/arm/mach-omap2/pm24xx.c | 24 +--------- 6 files changed, 89 insertions(+), 49 deletions(-) diff --git a/arch/arm/mach-omap2/clkt2xxx_apll.c b/arch/arm/mach-omap2/clkt2xxx_apll.c index 25b1feed480..c78e893eba7 100644 --- a/arch/arm/mach-omap2/clkt2xxx_apll.c +++ b/arch/arm/mach-omap2/clkt2xxx_apll.c @@ -52,7 +52,7 @@ static bool omap2xxx_clk_apll_locked(struct clk_hw *hw) apll_mask = EN_APLL_LOCKED << clk->enable_bit; - r = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); + r = omap2xxx_cm_get_pll_status(); return ((r & apll_mask) == apll_mask) ? true : false; } @@ -126,7 +126,7 @@ u32 omap2xxx_get_apll_clkin(void) { u32 aplls, srate = 0; - aplls = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL1); + aplls = omap2xxx_cm_get_pll_config(); aplls &= OMAP24XX_APLLS_CLKIN_MASK; aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT; diff --git a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c index d8620105c42..3ff32543493 100644 --- a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c +++ b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c @@ -60,8 +60,7 @@ unsigned long omap2xxx_clk_get_core_rate(void) core_clk = omap2_get_dpll_rate(dpll_core_ck); - v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); - v &= OMAP24XX_CORE_CLK_SRC_MASK; + v = omap2xxx_cm_get_core_clk_src(); if (v == CORE_CLK_SRC_32K) core_clk = 32768; @@ -79,8 +78,7 @@ static long omap2_dpllcore_round_rate(unsigned long target_rate) { u32 high, low, core_clk_src; - core_clk_src = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); - core_clk_src &= OMAP24XX_CORE_CLK_SRC_MASK; + core_clk_src = omap2xxx_cm_get_core_clk_src(); if (core_clk_src == CORE_CLK_SRC_DPLL) { /* DPLL clockout */ high = curr_prcm_set->dpll_speed * 2; @@ -120,8 +118,7 @@ int omap2_reprogram_dpllcore(struct clk_hw *hw, unsigned long rate, const struct dpll_data *dd; cur_rate = omap2xxx_clk_get_core_rate(); - mult = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); - mult &= OMAP24XX_CORE_CLK_SRC_MASK; + mult = omap2xxx_cm_get_core_clk_src(); if ((rate == (cur_rate / 2)) && (mult == 2)) { omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1); @@ -145,7 +142,7 @@ int omap2_reprogram_dpllcore(struct clk_hw *hw, unsigned long rate, tmpset.cm_clksel1_pll &= ~(dd->mult_mask | dd->div1_mask); div = ((curr_prcm_set->xtal_speed / 1000000) - 1); - tmpset.cm_clksel2_pll = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); + tmpset.cm_clksel2_pll = omap2xxx_cm_get_core_pll_config(); tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK; if (rate > low) { tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2; diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index ae2b35e76dc..b935ed2922d 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -98,7 +98,7 @@ long omap2_round_to_table_rate(struct clk_hw *hw, unsigned long rate, int omap2_select_table_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { - u32 cur_rate, done_rate, bypass = 0, tmp; + u32 cur_rate, done_rate, bypass = 0; const struct prcm_config *prcm; unsigned long found_speed = 0; unsigned long flags; @@ -141,23 +141,11 @@ int omap2_select_table_rate(struct clk_hw *hw, unsigned long rate, else done_rate = CORE_CLK_SRC_DPLL; - /* MPU divider */ - omap2_cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL); - - /* dsp + iva1 div(2420), iva2.1(2430) */ - omap2_cm_write_mod_reg(prcm->cm_clksel_dsp, - OMAP24XX_DSP_MOD, CM_CLKSEL); - - omap2_cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL); - - /* Major subsystem dividers */ - tmp = omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK; - omap2_cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD, - CM_CLKSEL1); - - if (cpu_is_omap2430()) - omap2_cm_write_mod_reg(prcm->cm_clksel_mdm, - OMAP2430_MDM_MOD, CM_CLKSEL); + omap2xxx_cm_set_mod_dividers(prcm->cm_clksel_mpu, + prcm->cm_clksel_dsp, + prcm->cm_clksel_gfx, + prcm->cm_clksel1_core, + prcm->cm_clksel_mdm); /* x2 to enter omap2xxx_sdrc_init_params() */ omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); diff --git a/arch/arm/mach-omap2/cm2xxx.c b/arch/arm/mach-omap2/cm2xxx.c index 6774a53a387..ce25abbcffa 100644 --- a/arch/arm/mach-omap2/cm2xxx.c +++ b/arch/arm/mach-omap2/cm2xxx.c @@ -327,6 +327,73 @@ struct clkdm_ops omap2_clkdm_operations = { .clkdm_clk_disable = omap2xxx_clkdm_clk_disable, }; +int omap2xxx_cm_fclks_active(void) +{ + u32 f1, f2; + + f1 = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); + f2 = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2); + + return (f1 | f2) ? 1 : 0; +} + +int omap2xxx_cm_mpu_retention_allowed(void) +{ + u32 l; + + /* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */ + l = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); + if (l & (OMAP2420_EN_MMC_MASK | OMAP24XX_EN_UART2_MASK | + OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_MCSPI2_MASK | + OMAP24XX_EN_MCSPI1_MASK | OMAP24XX_EN_DSS1_MASK)) + return 0; + /* Check for UART3. */ + l = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2); + if (l & OMAP24XX_EN_UART3_MASK) + return 0; + + return 1; +} + +u32 omap2xxx_cm_get_core_clk_src(void) +{ + u32 v; + + v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); + v &= OMAP24XX_CORE_CLK_SRC_MASK; + + return v; +} + +u32 omap2xxx_cm_get_core_pll_config(void) +{ + return omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); +} + +u32 omap2xxx_cm_get_pll_config(void) +{ + return omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL1); +} + +u32 omap2xxx_cm_get_pll_status(void) +{ + return omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); +} + +void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core, u32 mdm) +{ + u32 tmp; + + omap2_cm_write_mod_reg(mpu, MPU_MOD, CM_CLKSEL); + omap2_cm_write_mod_reg(dsp, OMAP24XX_DSP_MOD, CM_CLKSEL); + omap2_cm_write_mod_reg(gfx, GFX_MOD, CM_CLKSEL); + tmp = omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & + OMAP24XX_CLKSEL_DSS2_MASK; + omap2_cm_write_mod_reg(core | tmp, CORE_MOD, CM_CLKSEL1); + if (cpu_is_omap2430()) + omap2_cm_write_mod_reg(mdm, OMAP2430_MDM_MOD, CM_CLKSEL); +} + /* * */ diff --git a/arch/arm/mach-omap2/cm2xxx.h b/arch/arm/mach-omap2/cm2xxx.h index 4cbb39b051d..891d81c3c8f 100644 --- a/arch/arm/mach-omap2/cm2xxx.h +++ b/arch/arm/mach-omap2/cm2xxx.h @@ -62,6 +62,14 @@ extern int omap2xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift); extern int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst, u8 *idlest_reg_id); +extern int omap2xxx_cm_fclks_active(void); +extern int omap2xxx_cm_mpu_retention_allowed(void); +extern u32 omap2xxx_cm_get_core_clk_src(void); +extern u32 omap2xxx_cm_get_core_pll_config(void); +extern u32 omap2xxx_cm_get_pll_config(void); +extern u32 omap2xxx_cm_get_pll_status(void); +extern void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core, + u32 mdm); extern int __init omap2xxx_cm_init(void); diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index ce956b0a7ba..8c0759496c8 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -62,16 +62,6 @@ static struct clockdomain *dsp_clkdm, *mpu_clkdm, *wkup_clkdm, *gfx_clkdm; static struct clk *osc_ck, *emul_ck; -static int omap2_fclks_active(void) -{ - u32 f1, f2; - - f1 = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); - f2 = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2); - - return (f1 | f2) ? 1 : 0; -} - static int omap2_enter_full_retention(void) { u32 l; @@ -142,17 +132,7 @@ static int sti_console_enabled; static int omap2_allow_mpu_retention(void) { - u32 l; - - /* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */ - l = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); - if (l & (OMAP2420_EN_MMC_MASK | OMAP24XX_EN_UART2_MASK | - OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_MCSPI2_MASK | - OMAP24XX_EN_MCSPI1_MASK | OMAP24XX_EN_DSS1_MASK)) - return 0; - /* Check for UART3. */ - l = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2); - if (l & OMAP24XX_EN_UART3_MASK) + if (!omap2xxx_cm_mpu_retention_allowed()) return 0; if (sti_console_enabled) return 0; @@ -188,7 +168,7 @@ static void omap2_enter_mpu_retention(void) static int omap2_can_sleep(void) { - if (omap2_fclks_active()) + if (omap2xxx_cm_fclks_active()) return 0; if (__clk_is_enabled(osc_ck)) return 0; -- cgit v1.2.3-18-g5258 From 818b40e500b2afadeabfd7ca369800c350989143 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Fri, 11 Oct 2013 19:15:32 +0300 Subject: ARM: OMAP3: clock: add API to enable/disable autoidle for a single clock Some drivers require direct access to the autoidle functionality of the interface clocks. Added clock APIs for these, so that the drivers do not need to access CM registers directly. Signed-off-by: Tero Kristo Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clock.c | 38 ++++++++++++++++++++++++++++++++++++++ arch/arm/mach-omap2/clock.h | 2 ++ 2 files changed, 40 insertions(+) diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 0c38ca96c84..c7c5d31e908 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -542,6 +542,44 @@ int omap2_clk_disable_autoidle_all(void) return 0; } +/** + * omap2_clk_deny_idle - disable autoidle on an OMAP clock + * @clk: struct clk * to disable autoidle for + * + * Disable autoidle on an OMAP clock. + */ +int omap2_clk_deny_idle(struct clk *clk) +{ + struct clk_hw_omap *c; + + if (__clk_get_flags(clk) & CLK_IS_BASIC) + return -EINVAL; + + c = to_clk_hw_omap(__clk_get_hw(clk)); + if (c->ops && c->ops->deny_idle) + c->ops->deny_idle(c); + return 0; +} + +/** + * omap2_clk_allow_idle - enable autoidle on an OMAP clock + * @clk: struct clk * to enable autoidle for + * + * Enable autoidle on an OMAP clock. + */ +int omap2_clk_allow_idle(struct clk *clk) +{ + struct clk_hw_omap *c; + + if (__clk_get_flags(clk) & CLK_IS_BASIC) + return -EINVAL; + + c = to_clk_hw_omap(__clk_get_hw(clk)); + if (c->ops && c->ops->allow_idle) + c->ops->allow_idle(c); + return 0; +} + /** * omap2_clk_enable_init_clocks - prepare & enable a list of clocks * @clk_names: ptr to an array of strings of clock names to enable diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 7aa32cd292f..82916cc82c9 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -411,6 +411,8 @@ void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk, void omap2_init_clk_hw_omap_clocks(struct clk *clk); int omap2_clk_enable_autoidle_all(void); int omap2_clk_disable_autoidle_all(void); +int omap2_clk_allow_idle(struct clk *clk); +int omap2_clk_deny_idle(struct clk *clk); void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks); int omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name); void omap2_clk_print_new_rates(const char *hfclkin_ck_name, -- cgit v1.2.3-18-g5258 From 7a90da2ad3fdd44a6230c0e2c0a374a5cda1711c Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Fri, 11 Oct 2013 19:15:33 +0300 Subject: ARM: OMAP3: McBSP: do not access CM register directly McBSP driver require special hacks to enable/disable the autoidle feature for its interface clock for the proper function of the sidetone hardware. Currently the driver just writes CM registers directly, which should be avoided. Thus, changed the driver to use the new deny/allow_autoidle clock API calls. Signed-off-by: Tero Kristo Cc: Peter Ujfalusi Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/mcbsp.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 5d8768075dd..b4ac3af1160 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -25,6 +25,7 @@ #include "soc.h" #include "omap_device.h" +#include "clock.h" /* * FIXME: Find a mechanism to enable/disable runtime the McBSP ICLK autoidle. @@ -33,22 +34,18 @@ #include "cm3xxx.h" #include "cm-regbits-34xx.h" +static struct clk *mcbsp_iclks[5]; + static int omap3_enable_st_clock(unsigned int id, bool enable) { - unsigned int w; - /* * Sidetone uses McBSP ICLK - which must not idle when sidetones * are enabled or sidetones start sounding ugly. */ - w = omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE); if (enable) - w &= ~(1 << (id - 2)); + return omap2_clk_deny_idle(mcbsp_iclks[id]); else - w |= 1 << (id - 2); - omap2_cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE); - - return 0; + return omap2_clk_allow_idle(mcbsp_iclks[id]); } static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused) @@ -58,6 +55,7 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused) struct omap_hwmod *oh_device[2]; struct omap_mcbsp_platform_data *pdata = NULL; struct platform_device *pdev; + char clk_name[11]; sscanf(oh->name, "mcbsp%d", &id); @@ -99,6 +97,8 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused) oh_device[1] = omap_hwmod_lookup(( (struct omap_mcbsp_dev_attr *)(oh->dev_attr))->sidetone); pdata->enable_st_clock = omap3_enable_st_clock; + sprintf(clk_name, "mcbsp%d_ick", id); + mcbsp_iclks[id] = clk_get(NULL, clk_name); count++; } pdev = omap_device_build_ss(name, id, oh_device, count, pdata, -- cgit v1.2.3-18-g5258 From c6a2d839d0dba8a06f55c7b06f8ce33bdbe4aea3 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Fri, 11 Oct 2013 19:15:34 +0300 Subject: ARM: OMAP3: CM/control: move CM scratchpad save to CM driver OMAP3 PM code for off-mode currently saves the scratchpad contents for CM registers within OMAP control module driver. However, as we are separating CM code into its own driver, this must be moved also. This patch adds a new API for saving the CM scratchpad contents and uses this from the high level scratchpad save function. Signed-off-by: Tero Kristo Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/cm3xxx.c | 22 ++++++++++++++++++++++ arch/arm/mach-omap2/cm3xxx.h | 1 + arch/arm/mach-omap2/control.c | 43 ++++--------------------------------------- 3 files changed, 27 insertions(+), 39 deletions(-) diff --git a/arch/arm/mach-omap2/cm3xxx.c b/arch/arm/mach-omap2/cm3xxx.c index 9061c307d91..f6f028867bf 100644 --- a/arch/arm/mach-omap2/cm3xxx.c +++ b/arch/arm/mach-omap2/cm3xxx.c @@ -636,6 +636,28 @@ void omap3_cm_restore_context(void) OMAP3_CM_CLKOUT_CTRL_OFFSET); } +void omap3_cm_save_scratchpad_contents(u32 *ptr) +{ + *ptr++ = omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL); + *ptr++ = omap2_cm_read_mod_reg(WKUP_MOD, CM_CLKSEL); + *ptr++ = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); + + /* + * As per erratum i671, ROM code does not respect the PER DPLL + * programming scheme if CM_AUTOIDLE_PLL..AUTO_PERIPH_DPLL == 1. + * Then, in anycase, clear these bits to avoid extra latencies. + */ + *ptr++ = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE) & + ~OMAP3430_AUTO_PERIPH_DPLL_MASK; + *ptr++ = omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL); + *ptr++ = omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL2_PLL); + *ptr++ = omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL3); + *ptr++ = omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKEN_PLL); + *ptr++ = omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL); + *ptr++ = omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL); + *ptr++ = omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL); +} + /* * */ diff --git a/arch/arm/mach-omap2/cm3xxx.h b/arch/arm/mach-omap2/cm3xxx.h index e8e146f4a43..8224c91b4d7 100644 --- a/arch/arm/mach-omap2/cm3xxx.h +++ b/arch/arm/mach-omap2/cm3xxx.h @@ -83,6 +83,7 @@ extern int omap3xxx_cm_split_idlest_reg(void __iomem *idlest_reg, extern void omap3_cm_save_context(void); extern void omap3_cm_restore_context(void); +extern void omap3_cm_save_scratchpad_contents(u32 *ptr); extern int __init omap3xxx_cm_init(void); diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 31e0dfe4a4e..a5971145454 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -46,17 +46,7 @@ struct omap3_scratchpad { struct omap3_scratchpad_prcm_block { u32 prm_clksrc_ctrl; u32 prm_clksel; - u32 cm_clksel_core; - u32 cm_clksel_wkup; - u32 cm_clken_pll; - u32 cm_autoidle_pll; - u32 cm_clksel1_pll; - u32 cm_clksel2_pll; - u32 cm_clksel3_pll; - u32 cm_clken_pll_mpu; - u32 cm_autoidle_pll_mpu; - u32 cm_clksel1_pll_mpu; - u32 cm_clksel2_pll_mpu; + u32 cm_contents[11]; u32 prcm_block_size; }; @@ -347,34 +337,9 @@ void omap3_save_scratchpad_contents(void) prcm_block_contents.prm_clksel = omap2_prm_read_mod_reg(OMAP3430_CCR_MOD, OMAP3_PRM_CLKSEL_OFFSET); - prcm_block_contents.cm_clksel_core = - omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL); - prcm_block_contents.cm_clksel_wkup = - omap2_cm_read_mod_reg(WKUP_MOD, CM_CLKSEL); - prcm_block_contents.cm_clken_pll = - omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); - /* - * As per erratum i671, ROM code does not respect the PER DPLL - * programming scheme if CM_AUTOIDLE_PLL..AUTO_PERIPH_DPLL == 1. - * Then, in anycase, clear these bits to avoid extra latencies. - */ - prcm_block_contents.cm_autoidle_pll = - omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE) & - ~OMAP3430_AUTO_PERIPH_DPLL_MASK; - prcm_block_contents.cm_clksel1_pll = - omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL); - prcm_block_contents.cm_clksel2_pll = - omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL2_PLL); - prcm_block_contents.cm_clksel3_pll = - omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL3); - prcm_block_contents.cm_clken_pll_mpu = - omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKEN_PLL); - prcm_block_contents.cm_autoidle_pll_mpu = - omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL); - prcm_block_contents.cm_clksel1_pll_mpu = - omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL); - prcm_block_contents.cm_clksel2_pll_mpu = - omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL); + + omap3_cm_save_scratchpad_contents(prcm_block_contents.cm_contents); + prcm_block_contents.prcm_block_size = 0x0; /* Populate the SDRC block contents */ -- cgit v1.2.3-18-g5258 From 49e03402327ab69a26f604398982ef14123900a2 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Fri, 11 Oct 2013 19:15:38 +0300 Subject: ARM: OMAP3: control: add API for setting IVA bootmode OMAP3 PM core requires IVA2 bootmode to be set to idle during init. Currently, a direct register write is used for this. Add a new ctrl API for this purpose instead. Signed-off-by: Tero Kristo Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/control.c | 11 +++++++++++ arch/arm/mach-omap2/control.h | 1 + arch/arm/mach-omap2/pm34xx.c | 3 +-- 3 files changed, 13 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index a5971145454..44bb4d544dc 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -569,4 +569,15 @@ int omap3_ctrl_save_padconf(void) return 0; } +/** + * omap3_ctrl_set_iva_bootmode_idle - sets the IVA2 bootmode to idle + * + * Sets the bootmode for IVA2 to idle. This is needed by the PM code to + * force disable IVA2 so that it does not prevent any low-power states. + */ +void omap3_ctrl_set_iva_bootmode_idle(void) +{ + omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE, + OMAP343X_CONTROL_IVA2_BOOTMOD); +} #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */ diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index f7d7c2ef1b4..da054801b11 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -427,6 +427,7 @@ extern void omap_ctrl_write_dsp_boot_addr(u32 bootaddr); extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode); extern void omap3630_ctrl_disable_rta(void); extern int omap3_ctrl_save_padconf(void); +extern void omap3_ctrl_set_iva_bootmode_idle(void); extern void omap2_set_globals_control(void __iomem *ctrl, void __iomem *ctrl_pad); #else diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 5a2d8034c8d..93b80e5da8d 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -430,8 +430,7 @@ static void __init omap3_iva_idle(void) OMAP3430_IVA2_MOD, CM_FCLKEN); /* Set IVA2 boot mode to 'idle' */ - omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE, - OMAP343X_CONTROL_IVA2_BOOTMOD); + omap3_ctrl_set_iva_bootmode_idle(); /* Un-reset IVA2 */ omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL); -- cgit v1.2.3-18-g5258