From 786228ab3095fe18dba3bc0d62055a123991d9d9 Mon Sep 17 00:00:00 2001 From: Marcos Paulo de Souza Date: Wed, 23 Nov 2011 20:56:45 +0800 Subject: writeback: Fix issue on make htmldocs Document the @reason parameter to make "make htmldocs" happy. Acked-by: Randy Dunlap Signed-off-by: Marcos Paulo de Souza Signed-off-by: Wu Fengguang --- fs/fs-writeback.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c index 73c3992b2bb..ac86f8b3e3c 100644 --- a/fs/fs-writeback.c +++ b/fs/fs-writeback.c @@ -156,6 +156,7 @@ __bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages, * bdi_start_writeback - start writeback * @bdi: the backing device to write from * @nr_pages: the number of pages to write + * @reason: reason why some writeback work was initiated * * Description: * This does WB_SYNC_NONE opportunistic writeback. The IO is only @@ -1223,6 +1224,7 @@ static void wait_sb_inodes(struct super_block *sb) * writeback_inodes_sb_nr - writeback dirty inodes from given super_block * @sb: the superblock * @nr: the number of pages to write + * @reason: reason why some writeback work initiated * * Start writeback on some inodes on this super_block. No guarantees are made * on how many (if any) will be written, and this function does not wait @@ -1251,6 +1253,7 @@ EXPORT_SYMBOL(writeback_inodes_sb_nr); /** * writeback_inodes_sb - writeback dirty inodes from given super_block * @sb: the superblock + * @reason: reason why some writeback work was initiated * * Start writeback on some inodes on this super_block. No guarantees are made * on how many (if any) will be written, and this function does not wait @@ -1265,6 +1268,7 @@ EXPORT_SYMBOL(writeback_inodes_sb); /** * writeback_inodes_sb_if_idle - start writeback if none underway * @sb: the superblock + * @reason: reason why some writeback work was initiated * * Invoke writeback_inodes_sb if no writeback is currently underway. * Returns 1 if writeback was started, 0 if not. @@ -1285,6 +1289,7 @@ EXPORT_SYMBOL(writeback_inodes_sb_if_idle); * writeback_inodes_sb_if_idle - start writeback if none underway * @sb: the superblock * @nr: the number of pages to write + * @reason: reason why some writeback work was initiated * * Invoke writeback_inodes_sb if no writeback is currently underway. * Returns 1 if writeback was started, 0 if not. -- cgit v1.2.3-18-g5258 From a50527b19c62c808a7fca022816fff88a50b948d Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Fri, 2 Dec 2011 09:17:02 +0800 Subject: fs: Make write(2) interruptible by a fatal signal Currently write(2) to a file is not interruptible by any signal. Sometimes this is desirable, e.g. when you want to quickly kill a process hogging your disk. Also, with commit 499d05ecf990 ("mm: Make task in balance_dirty_pages() killable"), it's necessary to abort the current write accordingly to avoid it quickly dirtying lots more pages at unthrottled rate. This patch makes write interruptible by SIGKILL. We do not allow write to be interruptible by any other signal because that has larger potential of screwing some badly written applications. Reported-by: Kazuya Mio Tested-by: Kazuya Mio Acked-by: Matthew Wilcox Signed-off-by: Jan Kara Signed-off-by: Wu Fengguang --- mm/filemap.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/mm/filemap.c b/mm/filemap.c index c0018f2d50e..c106d3b3cc6 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -2407,7 +2407,6 @@ static ssize_t generic_perform_write(struct file *file, iov_iter_count(i)); again: - /* * Bring in the user page that we will copy from _first_. * Otherwise there's a nasty deadlock on copying from the @@ -2463,7 +2462,10 @@ again: written += copied; balance_dirty_pages_ratelimited(mapping); - + if (fatal_signal_pending(current)) { + status = -EINTR; + break; + } } while (iov_iter_count(i)); return written ? written : status; -- cgit v1.2.3-18-g5258 From aed21ad28b1323b2807faea019e5ac388a7bc837 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Wed, 23 Nov 2011 11:44:41 -0600 Subject: writeback: comment on the bdi dirty threshold We do "floating proportions" to let active devices to grow its target share of dirty pages and stalled/inactive devices to decrease its target share over time. It works well except in the case of "an inactive disk suddenly goes busy", where the initial target share may be too small. To mitigate this, bdi_position_ratio() has the below line to raise a small bdi_thresh when it's safe to do so, so that the disk be feed with enough dirty pages for efficient IO and in turn fast rampup of bdi_thresh: bdi_thresh = max(bdi_thresh, (limit - dirty) / 8); balance_dirty_pages() normally does negative feedback control which adjusts ratelimit to balance the bdi dirty pages around the target. In some extreme cases when that is not enough, it will have to block the tasks completely until the bdi dirty pages drop below bdi_thresh. Acked-by: Jan Kara Acked-by: Peter Zijlstra Signed-off-by: Wu Fengguang --- mm/page-writeback.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/mm/page-writeback.c b/mm/page-writeback.c index 71252486bc6..155efca4c12 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -411,8 +411,13 @@ void global_dirty_limits(unsigned long *pbackground, unsigned long *pdirty) * * Returns @bdi's dirty limit in pages. The term "dirty" in the context of * dirty balancing includes all PG_dirty, PG_writeback and NFS unstable pages. - * And the "limit" in the name is not seriously taken as hard limit in - * balance_dirty_pages(). + * + * Note that balance_dirty_pages() will only seriously take it as a hard limit + * when sleeping max_pause per page is not enough to keep the dirty pages under + * control. For example, when the device is completely stalled due to some error + * conditions, or when there are 1000 dd tasks writing to a slow 10MB/s USB key. + * In the other normal situations, it acts more gently by throttling the tasks + * more (rather than completely block them) when the bdi dirty pages go high. * * It allocates high/low dirty limits to fast/slow devices, in order to prevent * - starving fast devices @@ -594,6 +599,13 @@ static unsigned long bdi_position_ratio(struct backing_dev_info *bdi, */ if (unlikely(bdi_thresh > thresh)) bdi_thresh = thresh; + /* + * It's very possible that bdi_thresh is close to 0 not because the + * device is slow, but that it has remained inactive for long time. + * Honour such devices a reasonable good (hopefully IO efficient) + * threshold, so that the occasional writes won't be blocked and active + * writes can rampup the threshold quickly. + */ bdi_thresh = max(bdi_thresh, (limit - dirty) / 8); /* * scale global setpoint to bdi's: -- cgit v1.2.3-18-g5258 From c5c6343c4d75f9d3226e05a72e7861e967fc8099 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Fri, 2 Dec 2011 10:21:33 -0600 Subject: writeback: permit through good bdi even when global dirty exceeded On a system with 1 local mount and 1 NFS mount, if the NFS server becomes not responding when dd to the NFS mount, the NFS dirty pages may exceed the global dirty limit and _every_ task involving writing will be blocked. The whole system appears unresponsive. The workaround is to permit through the bdi's that only has a small number of dirty pages. The number chosen (bdi_stat_error pages) is not enough to enable the local disk to run in optimal throughput, however is enough to make the system responsive on a broken NFS mount. The user can then kill the dirtiers on the NFS mount and increase the global dirty limit to bring up the local disk's throughput. It risks allowing dirty pages to grow much larger than the global dirty limit when there are 1000+ mounts, however that's very unlikely to happen, especially in low memory profiles. Signed-off-by: Wu Fengguang --- mm/page-writeback.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/mm/page-writeback.c b/mm/page-writeback.c index 155efca4c12..17403e3a7c8 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -1148,6 +1148,19 @@ pause: if (task_ratelimit) break; + /* + * In the case of an unresponding NFS server and the NFS dirty + * pages exceeds dirty_thresh, give the other good bdi's a pipe + * to go through, so that tasks on them still remain responsive. + * + * In theory 1 page is enough to keep the comsumer-producer + * pipe going: the flusher cleans 1 page => the task dirties 1 + * more page. However bdi_dirty has accounting errors. So use + * the larger and more IO friendly bdi_stat_error. + */ + if (bdi_dirty <= bdi_stat_error(bdi)) + break; + if (fatal_signal_pending(current)) break; } -- cgit v1.2.3-18-g5258 From 82e230a07de3812a5e87a27979f033dad59172e3 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Fri, 2 Dec 2011 18:21:51 -0600 Subject: writeback: set max_pause to lowest value on zero bdi_dirty Some trace shows lots of bdi_dirty=0 lines where it's actually some small value if w/o the accounting errors in the per-cpu bdi stats. In this case the max pause time should really be set to the smallest (non-zero) value to avoid IO queue underrun and improve throughput. Signed-off-by: Wu Fengguang --- mm/page-writeback.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/mm/page-writeback.c b/mm/page-writeback.c index 17403e3a7c8..50f08241f98 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -989,8 +989,7 @@ static unsigned long bdi_max_pause(struct backing_dev_info *bdi, * * 8 serves as the safety ratio. */ - if (bdi_dirty) - t = min(t, bdi_dirty * HZ / (8 * bw + 1)); + t = min(t, bdi_dirty * HZ / (8 * bw + 1)); /* * The pause time will be settled within range (max_pause/4, max_pause). -- cgit v1.2.3-18-g5258