From f10820e49585f281706ac07570a9e1652bdb5dd9 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 31 Jan 2011 15:09:23 +0100 Subject: i2c-stu300: make sure adapter-name is terminated Use strlcpy instead of strncpy. Signed-off-by: Wolfram Sang Cc: Linus Walleij Cc: Ben Dooks Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-stu300.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c index 495be451d32..266135ddf7f 100644 --- a/drivers/i2c/busses/i2c-stu300.c +++ b/drivers/i2c/busses/i2c-stu300.c @@ -942,7 +942,7 @@ stu300_probe(struct platform_device *pdev) adap->owner = THIS_MODULE; /* DDC class but actually often used for more generic I2C */ adap->class = I2C_CLASS_DDC; - strncpy(adap->name, "ST Microelectronics DDC I2C adapter", + strlcpy(adap->name, "ST Microelectronics DDC I2C adapter", sizeof(adap->name)); adap->nr = bus_nr; adap->algo = &stu300_algo; -- cgit v1.2.3-18-g5258 From adf6e07922255937c8bfeea777d19502b4c9a2be Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 27 Jan 2011 16:18:41 -0800 Subject: i2c-omap: fix static suspend vs. runtime suspend When runtime PM is enabled, each OMAP i2c device is suspended after each i2c xfer. However, there are two cases when the static suspend methods must be used to ensure the devices are suspended: 1) runtime PM is disabled, either at compile time or dynamically via /sys/devices/.../power/control. 2) an i2c client driver uses i2c during it's suspend callback, thus leaving the i2c driver active (NOTE: runtime suspend transitions are disabled during system suspend, so i2c activity during system suspend will runtime resume the device, but not runtime (re)suspend it.) Since the actual work to suspend the device is handled by the subsytem, call the bus methods to take care of it. NOTE: This takes care of a known suspend problem on OMAP3 where the TWL RTC driver does i2c xfers during its suspend path leaving the i2c driver in an active state (since runtime suspend transistions are disabled.) Signed-off-by: Kevin Hilman Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-omap.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index b605ff3a1fa..0541df90b9f 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1137,12 +1137,40 @@ omap_i2c_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_SUSPEND +static int omap_i2c_suspend(struct device *dev) +{ + if (!pm_runtime_suspended(dev)) + if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_suspend) + dev->bus->pm->runtime_suspend(dev); + + return 0; +} + +static int omap_i2c_resume(struct device *dev) +{ + if (!pm_runtime_suspended(dev)) + if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_resume) + dev->bus->pm->runtime_resume(dev); + + return 0; +} + +static struct dev_pm_ops omap_i2c_pm_ops = { + .suspend = omap_i2c_suspend, + .resume = omap_i2c_resume, +}; +#else +#define omap_i2c_pm_ops NULL +#endif + static struct platform_driver omap_i2c_driver = { .probe = omap_i2c_probe, .remove = omap_i2c_remove, .driver = { .name = "omap_i2c", .owner = THIS_MODULE, + .pm = &omap_i2c_pm_ops, }, }; -- cgit v1.2.3-18-g5258 From f72487e7a1827f5e95425b80ec4fcc4f928329e8 Mon Sep 17 00:00:00 2001 From: Balaji T K Date: Tue, 22 Feb 2011 12:25:39 +0530 Subject: i2c-omap: fix build for !CONFIG_SUSPEND fix the build break when !CONFIG_SUSPEND drivers/i2c/busses/i2c-omap.c:1173: error: lvalue required as unary '&' operand make[3]: *** [drivers/i2c/busses/i2c-omap.o] Error 1 make[2]: *** [drivers/i2c/busses] Error 2 make[1]: *** [drivers/i2c] Error 2 make: *** [drivers] Error 2 Signed-off-by: Balaji T K Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-omap.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 0541df90b9f..adc1ee53b1a 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1160,8 +1160,9 @@ static struct dev_pm_ops omap_i2c_pm_ops = { .suspend = omap_i2c_suspend, .resume = omap_i2c_resume, }; +#define OMAP_I2C_PM_OPS (&omap_i2c_pm_ops) #else -#define omap_i2c_pm_ops NULL +#define OMAP_I2C_PM_OPS NULL #endif static struct platform_driver omap_i2c_driver = { @@ -1170,7 +1171,7 @@ static struct platform_driver omap_i2c_driver = { .driver = { .name = "omap_i2c", .owner = THIS_MODULE, - .pm = &omap_i2c_pm_ops, + .pm = OMAP_I2C_PM_OPS, }, }; -- cgit v1.2.3-18-g5258 From cb527ede1bf6ff2008a025606f25344b8ed7b4ac Mon Sep 17 00:00:00 2001 From: Richard woodruff Date: Wed, 16 Feb 2011 10:24:16 +0530 Subject: i2c-omap: Double clear of ARDY status in IRQ handler This errata occurs when the ARDY interrupt generation is enabled. At the begining of every new transaction the ARDY interrupt is cleared. On continuous i2c transactions where after clearing the ARDY bit from I2C_STAT register (clearing the interrupt), the IRQ line is reasserted and the I2C_STAT[ARDY] bit set again on 1. In fact, the ARDY status bit is not cleared at the write access to I2C_STAT[ARDY] and only the IRQ line is deasserted and then reasserted. This is not captured in the usual errata documents. The workaround is to have a double clear of ARDY status in irq handler. Signed-off-by: Richard woodruff Signed-off-by: Keerthy Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-omap.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index adc1ee53b1a..e3f925ac1c3 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -847,11 +847,15 @@ complete: dev_err(dev->dev, "Arbitration lost\n"); err |= OMAP_I2C_STAT_AL; } + /* + * ProDB0017052: Clear ARDY bit twice + */ if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) { omap_i2c_ack_stat(dev, stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR | - OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR)); + OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR | + OMAP_I2C_STAT_ARDY)); omap_i2c_complete_cmd(dev, err); return IRQ_HANDLED; } -- cgit v1.2.3-18-g5258 From a5a595cc36bbbe16f6a3f0e6968f94a0604bfd28 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 23 Feb 2011 00:43:55 +0000 Subject: i2c-omap: fixup commit cb527ede1bf6ff2008a025606f25344b8ed7b4ac whitespace Fixup the whitespace error noticed in cb527ede1bf6ff2008a025606f25344b8ed7b4ac Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-omap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index e3f925ac1c3..829a2a1029f 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -847,9 +847,9 @@ complete: dev_err(dev->dev, "Arbitration lost\n"); err |= OMAP_I2C_STAT_AL; } - /* + /* * ProDB0017052: Clear ARDY bit twice - */ + */ if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) { omap_i2c_ack_stat(dev, stat & -- cgit v1.2.3-18-g5258