From 662c738d9946de521dcece2b146dced335242389 Mon Sep 17 00:00:00 2001 From: Heiko Stübner Date: Wed, 29 Feb 2012 23:03:11 +0100 Subject: usb: otg: gpio_vbus: Add otg transceiver events and notifiers Commit 9ad63986c606 (pda_power: Add support for using otg transceiver events) converted the pda-power driver to use otg events to determine the status of the power supply. As gpio-vbus didn't use otg events until now, this change breaks setups of pda-power with a gpio-vbus transceiver. This patch adds the necessary otg events and notifiers to gpio-vbus. Signed-off-by: Heiko Stuebner Reviewed-by: Dima Zavin Signed-off-by: Felipe Balbi --- drivers/usb/otg/gpio_vbus.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/usb/otg/gpio_vbus.c b/drivers/usb/otg/gpio_vbus.c index 3ece43a2e4c..a0a2178974f 100644 --- a/drivers/usb/otg/gpio_vbus.c +++ b/drivers/usb/otg/gpio_vbus.c @@ -96,7 +96,7 @@ static void gpio_vbus_work(struct work_struct *work) struct gpio_vbus_data *gpio_vbus = container_of(work, struct gpio_vbus_data, work); struct gpio_vbus_mach_info *pdata = gpio_vbus->dev->platform_data; - int gpio; + int gpio, status; if (!gpio_vbus->phy.otg->gadget) return; @@ -108,7 +108,9 @@ static void gpio_vbus_work(struct work_struct *work) */ gpio = pdata->gpio_pullup; if (is_vbus_powered(pdata)) { + status = USB_EVENT_VBUS; gpio_vbus->phy.state = OTG_STATE_B_PERIPHERAL; + gpio_vbus->phy.last_event = status; usb_gadget_vbus_connect(gpio_vbus->phy.otg->gadget); /* drawing a "unit load" is *always* OK, except for OTG */ @@ -117,6 +119,9 @@ static void gpio_vbus_work(struct work_struct *work) /* optionally enable D+ pullup */ if (gpio_is_valid(gpio)) gpio_set_value(gpio, !pdata->gpio_pullup_inverted); + + atomic_notifier_call_chain(&gpio_vbus->phy.notifier, + status, gpio_vbus->phy.otg->gadget); } else { /* optionally disable D+ pullup */ if (gpio_is_valid(gpio)) @@ -125,7 +130,12 @@ static void gpio_vbus_work(struct work_struct *work) set_vbus_draw(gpio_vbus, 0); usb_gadget_vbus_disconnect(gpio_vbus->phy.otg->gadget); + status = USB_EVENT_NONE; gpio_vbus->phy.state = OTG_STATE_B_IDLE; + gpio_vbus->phy.last_event = status; + + atomic_notifier_call_chain(&gpio_vbus->phy.notifier, + status, gpio_vbus->phy.otg->gadget); } } @@ -287,6 +297,9 @@ static int __init gpio_vbus_probe(struct platform_device *pdev) irq, err); goto err_irq; } + + ATOMIC_INIT_NOTIFIER_HEAD(&gpio_vbus->phy.notifier); + INIT_WORK(&gpio_vbus->work, gpio_vbus_work); gpio_vbus->vbus_draw = regulator_get(&pdev->dev, "vbus_draw"); -- cgit v1.2.3-18-g5258 From c85dcdac5852295cf6822f5c4331a6ddab72581f Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 11 Apr 2012 16:09:10 -0400 Subject: USB: gadget: storage gadgets send wrong error code for unknown commands This patch (as1539) fixes a minor bug in the mass-storage gadget drivers. When an unknown command is received, the error code sent back is "Invalid Field in CDB" rather than "Invalid Command". This is because the bitmask of CDB bytes allowed to be nonzero is incorrect. When handling an unknown command, we don't care which command bytes are nonzero. All the bits in the mask should be set, not just eight of them. Signed-off-by: Alan Stern CC: CC: Signed-off-by: Felipe Balbi --- drivers/usb/gadget/f_mass_storage.c | 2 +- drivers/usb/gadget/file_storage.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index a371e966425..cb8c162cae5 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -2189,7 +2189,7 @@ unknown_cmnd: common->data_size_from_cmnd = 0; sprintf(unknown, "Unknown x%02x", common->cmnd[0]); reply = check_command(common, common->cmnd_size, - DATA_DIR_UNKNOWN, 0xff, 0, unknown); + DATA_DIR_UNKNOWN, ~0, 0, unknown); if (reply == 0) { common->curlun->sense_data = SS_INVALID_COMMAND; reply = -EINVAL; diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index 4fac5692774..a896d73f7a9 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -2579,7 +2579,7 @@ static int do_scsi_command(struct fsg_dev *fsg) fsg->data_size_from_cmnd = 0; sprintf(unknown, "Unknown x%02x", fsg->cmnd[0]); if ((reply = check_command(fsg, fsg->cmnd_size, - DATA_DIR_UNKNOWN, 0xff, 0, unknown)) == 0) { + DATA_DIR_UNKNOWN, ~0, 0, unknown)) == 0) { fsg->curlun->sense_data = SS_INVALID_COMMAND; reply = -EINVAL; } -- cgit v1.2.3-18-g5258 From 7e1f7c8a6e517900cd84da1b8ae020f08f286c3b Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 12 Apr 2012 17:29:36 +0100 Subject: ASoC: dapm: Ensure power gets managed for line widgets Line widgets had not been included in either the power up or power down sequences so if a widget had an event associated with it that event would never be run. Fix this minimally by adding them to the sequences, we should probably be doing away with the specific widget types as they all have the same priority anyway. Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/soc-dapm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 6241490fff3..dc7dbfe61cd 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -67,6 +67,7 @@ static int dapm_up_seq[] = { [snd_soc_dapm_out_drv] = 10, [snd_soc_dapm_hp] = 10, [snd_soc_dapm_spk] = 10, + [snd_soc_dapm_line] = 10, [snd_soc_dapm_post] = 11, }; @@ -75,6 +76,7 @@ static int dapm_down_seq[] = { [snd_soc_dapm_adc] = 1, [snd_soc_dapm_hp] = 2, [snd_soc_dapm_spk] = 2, + [snd_soc_dapm_line] = 2, [snd_soc_dapm_out_drv] = 2, [snd_soc_dapm_pga] = 4, [snd_soc_dapm_mixer_named_ctl] = 5, -- cgit v1.2.3-18-g5258 From 86fc49982369f6918dd9c6eeb70b38ab2303ed0a Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Thu, 12 Apr 2012 21:54:34 +0200 Subject: ASoC: cs42l73: don't use negative array index If cs42l73_get_mclkx_coeff() returns < 0 (which it can) in sound/soc/codecs/cs42l73.c::cs42l73_set_mclk(), then we'll be using the (negative) return value as array index on the very next line of code - that's bad. Catch the negative return value and propagate it to the caller (which checks for it) and things are a bit more sane :-) Signed-off-by: Jesper Juhl Signed-off-by: Mark Brown --- sound/soc/codecs/cs42l73.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/cs42l73.c b/sound/soc/codecs/cs42l73.c index 78979b3e0e9..07c44b71f09 100644 --- a/sound/soc/codecs/cs42l73.c +++ b/sound/soc/codecs/cs42l73.c @@ -929,6 +929,8 @@ static int cs42l73_set_mclk(struct snd_soc_dai *dai, unsigned int freq) /* MCLKX -> MCLK */ mclkx_coeff = cs42l73_get_mclkx_coeff(freq); + if (mclkx_coeff < 0) + return mclkx_coeff; mclk = cs42l73_mclkx_coeffs[mclkx_coeff].mclkx / cs42l73_mclkx_coeffs[mclkx_coeff].ratio; -- cgit v1.2.3-18-g5258 From a956bd6f8583326b18348ab1452b4686778f785d Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Thu, 12 Apr 2012 16:48:01 +0200 Subject: x86, microcode: Fix sysfs warning during module unload on unsupported CPUs Loading the microcode driver on an unsupported CPU and subsequently unloading the driver causes WARNING: at fs/sysfs/group.c:138 mc_device_remove+0x5f/0x70 [microcode]() Hardware name: 01972NG sysfs group ffffffffa00013d0 not found for kobject 'cpu0' Modules linked in: snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_intel btusb snd_hda_codec bluetooth thinkpad_acpi rfkill microcode(-) [last unloaded: cfg80211] Pid: 4560, comm: modprobe Not tainted 3.4.0-rc2-00002-g258f742 #5 Call Trace: [] ? warn_slowpath_common+0x7b/0xc0 [] ? warn_slowpath_fmt+0x45/0x50 [] ? sysfs_remove_group+0x34/0x120 [] ? mc_device_remove+0x5f/0x70 [microcode] [] ? subsys_interface_unregister+0x69/0xa0 [] ? mutex_lock+0x16/0x40 [] ? microcode_exit+0x50/0x92 [microcode] [] ? sys_delete_module+0x16d/0x260 [] ? wait_iff_congested+0x45/0x110 [] ? page_fault+0x1f/0x30 [] ? system_call_fastpath+0x16/0x1b on recent kernels. This is due to commit 8a25a2fd126c ("cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystem") which renders commit 6c53cbfced04 ("x86, microcode: Correct sysdev_add error path") useless. See http://marc.info/?l=linux-kernel&m=133416246406478 Avoid above warning by restoring the old driver behaviour before 6c53cbfced04 ("x86, microcode: Correct sysdev_add error path"). Cc: stable@vger.kernel.org Cc: Tigran Aivazian Signed-off-by: Andreas Herrmann Acked-by: Greg Kroah-Hartman Link: http://lkml.kernel.org/r/20120411163849.GE4794@alberich.amd.com Signed-off-by: Borislav Petkov --- arch/x86/kernel/microcode_core.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c index 87a0f868830..d389e74342a 100644 --- a/arch/x86/kernel/microcode_core.c +++ b/arch/x86/kernel/microcode_core.c @@ -419,10 +419,8 @@ static int mc_device_add(struct device *dev, struct subsys_interface *sif) if (err) return err; - if (microcode_init_cpu(cpu) == UCODE_ERROR) { - sysfs_remove_group(&dev->kobj, &mc_attr_group); + if (microcode_init_cpu(cpu) == UCODE_ERROR) return -EINVAL; - } return err; } -- cgit v1.2.3-18-g5258 From 283c1f2558ef4a4411fe908364b15b73b6ab44cf Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Thu, 12 Apr 2012 16:51:57 +0200 Subject: x86, microcode: Ensure that module is only loaded on supported AMD CPUs Exit early when there's no support for a particular CPU family. Also, fixup the "no support for this CPU vendor" to be issued only when the driver is attempted to be loaded on an unsupported vendor. Cc: stable@vger.kernel.org Cc: Tigran Aivazian Signed-off-by: Andreas Herrmann Acked-by: Greg Kroah-Hartman Link: http://lkml.kernel.org/r/20120411163849.GE4794@alberich.amd.com [Boris: add a commit msg because Andreas is lazy] Signed-off-by: Borislav Petkov --- arch/x86/kernel/microcode_amd.c | 12 +++++++----- arch/x86/kernel/microcode_core.c | 6 +++--- 2 files changed, 10 insertions(+), 8 deletions(-) diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index 73465aab28f..8a2ce8fd41c 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -82,11 +82,6 @@ static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig) { struct cpuinfo_x86 *c = &cpu_data(cpu); - if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) { - pr_warning("CPU%d: family %d not supported\n", cpu, c->x86); - return -1; - } - csig->rev = c->microcode; pr_info("CPU%d: patch_level=0x%08x\n", cpu, csig->rev); @@ -380,6 +375,13 @@ static struct microcode_ops microcode_amd_ops = { struct microcode_ops * __init init_amd_microcode(void) { + struct cpuinfo_x86 *c = &cpu_data(0); + + if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) { + pr_warning("AMD CPU family 0x%x not supported\n", c->x86); + return NULL; + } + patch = (void *)get_zeroed_page(GFP_KERNEL); if (!patch) return NULL; diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c index d389e74342a..c9bda6d6035 100644 --- a/arch/x86/kernel/microcode_core.c +++ b/arch/x86/kernel/microcode_core.c @@ -526,11 +526,11 @@ static int __init microcode_init(void) microcode_ops = init_intel_microcode(); else if (c->x86_vendor == X86_VENDOR_AMD) microcode_ops = init_amd_microcode(); - - if (!microcode_ops) { + else pr_err("no support for this CPU vendor\n"); + + if (!microcode_ops) return -ENODEV; - } microcode_pdev = platform_device_register_simple("microcode", -1, NULL, 0); -- cgit v1.2.3-18-g5258 From 7d3d43dab4e978d8d9ad1acf8af15c9b1c4b0f0f Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Fri, 6 Apr 2012 15:33:35 +0000 Subject: net: In unregister_netdevice_notifier unregister the netdevices. We already synthesize events in register_netdevice_notifier and synthesizing events in unregister_netdevice_notifier allows to us remove the need for special case cleanup code. This change should be safe as it adds no new cases for existing callers of unregiser_netdevice_notifier to handle. Signed-off-by: Eric W. Biederman Signed-off-by: David S. Miller --- net/core/dev.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/net/core/dev.c b/net/core/dev.c index c25d453b280..9bb8f87c4cd 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1409,14 +1409,34 @@ EXPORT_SYMBOL(register_netdevice_notifier); * register_netdevice_notifier(). The notifier is unlinked into the * kernel structures and may then be reused. A negative errno code * is returned on a failure. + * + * After unregistering unregister and down device events are synthesized + * for all devices on the device list to the removed notifier to remove + * the need for special case cleanup code. */ int unregister_netdevice_notifier(struct notifier_block *nb) { + struct net_device *dev; + struct net *net; int err; rtnl_lock(); err = raw_notifier_chain_unregister(&netdev_chain, nb); + if (err) + goto unlock; + + for_each_net(net) { + for_each_netdev(net, dev) { + if (dev->flags & IFF_UP) { + nb->notifier_call(nb, NETDEV_GOING_DOWN, dev); + nb->notifier_call(nb, NETDEV_DOWN, dev); + } + nb->notifier_call(nb, NETDEV_UNREGISTER, dev); + nb->notifier_call(nb, NETDEV_UNREGISTER_BATCH, dev); + } + } +unlock: rtnl_unlock(); return err; } -- cgit v1.2.3-18-g5258 From 03478756b1b9298686ca9c8793e484ae39eb4649 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Fri, 6 Apr 2012 15:35:39 +0000 Subject: phonet: Sort out initiailziation and cleanup code. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Recently an oops was reported in phonet if there was a failure during network namespace creation. [ 163.733755] ------------[ cut here ]------------ [ 163.734501] kernel BUG at include/net/netns/generic.h:45! [ 163.734501] invalid opcode: 0000 [#1] PREEMPT SMP [ 163.734501] CPU 2 [ 163.734501] Pid: 19145, comm: trinity Tainted: G W 3.4.0-rc1-next-20120405-sasha-dirty #57 [ 163.734501] RIP: 0010:[] [] phonet_pernet+0x182/0x1a0 [ 163.734501] RSP: 0018:ffff8800674d5ca8 EFLAGS: 00010246 [ 163.734501] RAX: 000000003fffffff RBX: 0000000000000000 RCX: ffff8800678c88d8 [ 163.734501] RDX: 00000000003f4000 RSI: ffff8800678c8910 RDI: 0000000000000282 [ 163.734501] RBP: ffff8800674d5cc8 R08: 0000000000000000 R09: 0000000000000000 [ 163.734501] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880068bec920 [ 163.734501] R13: ffffffff836b90c0 R14: 0000000000000000 R15: 0000000000000000 [ 163.734501] FS: 00007f055e8de700(0000) GS:ffff88007d000000(0000) knlGS:0000000000000000 [ 163.734501] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 163.734501] CR2: 00007f055e6bb518 CR3: 0000000070c16000 CR4: 00000000000406e0 [ 163.734501] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 163.734501] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 163.734501] Process trinity (pid: 19145, threadinfo ffff8800674d4000, task ffff8800678c8000) [ 163.734501] Stack: [ 163.734501] ffffffff824d5f00 ffffffff810e2ec1 ffff880067ae0000 00000000ffffffd4 [ 163.734501] ffff8800674d5cf8 ffffffff824d667a ffff880067ae0000 00000000ffffffd4 [ 163.734501] ffffffff836b90c0 0000000000000000 ffff8800674d5d18 ffffffff824d707d [ 163.734501] Call Trace: [ 163.734501] [] ? phonet_pernet+0x20/0x1a0 [ 163.734501] [] ? get_parent_ip+0x11/0x50 [ 163.734501] [] phonet_device_destroy+0x1a/0x100 [ 163.734501] [] phonet_device_notify+0x3d/0x50 [ 163.734501] [] notifier_call_chain+0xee/0x130 [ 163.734501] [] raw_notifier_call_chain+0x11/0x20 [ 163.734501] [] call_netdevice_notifiers+0x52/0x60 [ 163.734501] [] rollback_registered_many+0x185/0x270 [ 163.734501] [] unregister_netdevice_many+0x14/0x60 [ 163.734501] [] ipip_exit_net+0x1b3/0x1d0 [ 163.734501] [] ? ipip_rcv+0x420/0x420 [ 163.734501] [] ops_exit_list+0x35/0x70 [ 163.734501] [] setup_net+0xab/0xe0 [ 163.734501] [] copy_net_ns+0x76/0x100 [ 163.734501] [] create_new_namespaces+0xfb/0x190 [ 163.734501] [] unshare_nsproxy_namespaces+0x61/0x80 [ 163.734501] [] sys_unshare+0xff/0x290 [ 163.734501] [] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 163.734501] [] system_call_fastpath+0x16/0x1b [ 163.734501] Code: e0 c3 fe 66 0f 1f 44 00 00 48 c7 c2 40 60 4d 82 be 01 00 00 00 48 c7 c7 80 d1 23 83 e8 48 2a c4 fe e8 73 06 c8 fe 48 85 db 75 0e <0f> 0b 0f 1f 40 00 eb fe 66 0f 1f 44 00 00 48 83 c4 10 48 89 d8 [ 163.734501] RIP [] phonet_pernet+0x182/0x1a0 [ 163.734501] RSP [ 163.861289] ---[ end trace fb5615826c548066 ]--- After investigation it turns out there were two issues. 1) Phonet was not implementing network devices but was using register_pernet_device instead of register_pernet_subsys. This was allowing there to be cases when phonenet was not initialized and the phonet net_generic was not set for a network namespace when network device events were being reported on the netdevice_notifier for a network namespace leading to the oops above. 2) phonet_exit_net was implementing a confusing and special case of handling all network devices from going away that it was hard to see was correct, and would only occur when the phonet module was removed. Now that unregister_netdevice_notifier has been modified to synthesize unregistration events for the network devices that are extant when called this confusing special case in phonet_exit_net is no longer needed. Signed-off-by: Eric W. Biederman Acked-by: Rémi Denis-Courmont Signed-off-by: David S. Miller --- net/phonet/pn_dev.c | 21 ++------------------- 1 file changed, 2 insertions(+), 19 deletions(-) diff --git a/net/phonet/pn_dev.c b/net/phonet/pn_dev.c index 9b9a85ecc4c..bf5cf69c820 100644 --- a/net/phonet/pn_dev.c +++ b/net/phonet/pn_dev.c @@ -331,23 +331,6 @@ static int __net_init phonet_init_net(struct net *net) static void __net_exit phonet_exit_net(struct net *net) { - struct phonet_net *pnn = phonet_pernet(net); - struct net_device *dev; - unsigned i; - - rtnl_lock(); - for_each_netdev(net, dev) - phonet_device_destroy(dev); - - for (i = 0; i < 64; i++) { - dev = pnn->routes.table[i]; - if (dev) { - rtm_phonet_notify(RTM_DELROUTE, dev, i); - dev_put(dev); - } - } - rtnl_unlock(); - proc_net_remove(net, "phonet"); } @@ -361,7 +344,7 @@ static struct pernet_operations phonet_net_ops = { /* Initialize Phonet devices list */ int __init phonet_device_init(void) { - int err = register_pernet_device(&phonet_net_ops); + int err = register_pernet_subsys(&phonet_net_ops); if (err) return err; @@ -377,7 +360,7 @@ void phonet_device_exit(void) { rtnl_unregister_all(PF_PHONET); unregister_netdevice_notifier(&phonet_device_notifier); - unregister_pernet_device(&phonet_net_ops); + unregister_pernet_subsys(&phonet_net_ops); proc_net_remove(&init_net, "pnresource"); } -- cgit v1.2.3-18-g5258 From 89eb06f11c314c2ab4ec59039715dc021933a7a0 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 8 Apr 2012 22:41:10 +0000 Subject: net/key/af_key.c: add missing kfree_skb At the point of this error-handling code, alloc_skb has succeded, so free the resulting skb by jumping to the err label. Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- net/key/af_key.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/key/af_key.c b/net/key/af_key.c index 11dbb2255cc..7e5d927b576 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -3480,7 +3480,7 @@ static int pfkey_send_migrate(const struct xfrm_selector *sel, u8 dir, u8 type, /* Addresses to be used by KM for negotiation, if ext is available */ if (k != NULL && (set_sadb_kmaddress(skb, k) < 0)) - return -EINVAL; + goto err; /* selector src */ set_sadb_address(skb, sasize_sel, SADB_EXT_ADDRESS_SRC, sel); -- cgit v1.2.3-18-g5258 From 31304165ffb888483e0f7c805876f25f493a3049 Mon Sep 17 00:00:00 2001 From: Torsten Kaiser Date: Mon, 9 Apr 2012 05:14:15 +0000 Subject: net: Fix misplaced parenthesis in virtio_net.c Commit 2e57b79ccef1ff1422fdf45a9b28fe60f8f084f7 misplaced its parenthesis and now tx_fifo_errors will only be incremented if an ENOMEM error is not written to the syslog. Correct the parenthesis and indentation to the original goal of counting all non ENOMEM errors and ratelimiting only the messages. Signed-of-by: Torsten Kaiser Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 4de2760c593..af8acc85f4b 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -626,16 +626,15 @@ static netdev_tx_t start_xmit(struct sk_buff *skb, struct net_device *dev) /* This can happen with OOM and indirect buffers. */ if (unlikely(capacity < 0)) { if (likely(capacity == -ENOMEM)) { - if (net_ratelimit()) { + if (net_ratelimit()) dev_warn(&dev->dev, "TX queue failure: out of memory\n"); - } else { + } else { dev->stats.tx_fifo_errors++; if (net_ratelimit()) dev_warn(&dev->dev, "Unexpected TX queue failure: %d\n", capacity); - } } dev->stats.tx_dropped++; kfree_skb(skb); -- cgit v1.2.3-18-g5258 From d1f224ae186b834af647661ffaf403a817c050ce Mon Sep 17 00:00:00 2001 From: James Chapman Date: Tue, 10 Apr 2012 00:10:42 +0000 Subject: l2tp: fix refcount leak in l2tp_ip sockets The l2tp_ip socket close handler does not update the module refcount correctly which prevents module unload after the first bind() call on an L2TPv3 IP encapulation socket. Signed-off-by: James Chapman Signed-off-by: David S. Miller --- net/l2tp/l2tp_ip.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/l2tp/l2tp_ip.c b/net/l2tp/l2tp_ip.c index 55670ec3cd0..b56be1452f8 100644 --- a/net/l2tp/l2tp_ip.c +++ b/net/l2tp/l2tp_ip.c @@ -232,7 +232,7 @@ static void l2tp_ip_close(struct sock *sk, long timeout) { write_lock_bh(&l2tp_ip_lock); hlist_del_init(&sk->sk_bind_node); - hlist_del_init(&sk->sk_node); + sk_del_node_init(sk); write_unlock_bh(&l2tp_ip_lock); sk_common_release(sk); } -- cgit v1.2.3-18-g5258 From c9be48dc8bb22f1f6e6ff1560b2b28e925a0b815 Mon Sep 17 00:00:00 2001 From: James Chapman Date: Tue, 10 Apr 2012 00:10:43 +0000 Subject: l2tp: don't overwrite source address in l2tp_ip_bind() Applications using L2TP/IP sockets want to be able to bind() an L2TP/IP socket to set the local tunnel id while leaving the auto-assigned source address alone. So if no source address is supplied, don't overwrite the address already stored in the socket. Signed-off-by: James Chapman Signed-off-by: David S. Miller --- net/l2tp/l2tp_ip.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/l2tp/l2tp_ip.c b/net/l2tp/l2tp_ip.c index b56be1452f8..585d93ecee2 100644 --- a/net/l2tp/l2tp_ip.c +++ b/net/l2tp/l2tp_ip.c @@ -271,7 +271,8 @@ static int l2tp_ip_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len) chk_addr_ret != RTN_MULTICAST && chk_addr_ret != RTN_BROADCAST) goto out; - inet->inet_rcv_saddr = inet->inet_saddr = addr->l2tp_addr.s_addr; + if (addr->l2tp_addr.s_addr) + inet->inet_rcv_saddr = inet->inet_saddr = addr->l2tp_addr.s_addr; if (chk_addr_ret == RTN_MULTICAST || chk_addr_ret == RTN_BROADCAST) inet->inet_saddr = 0; /* Use device */ sk_dst_reset(sk); -- cgit v1.2.3-18-g5258 From 5c699fb7d88d360023f3b3f5291cbf5b59883a1b Mon Sep 17 00:00:00 2001 From: Tomasz Gregorek Date: Thu, 12 Apr 2012 08:18:07 +0000 Subject: caif: Fix memory leakage in the chnl_net.c. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Added kfree_skb() calls in the chnk_net.c file on the error paths. Signed-off-by: Sjur Brændeland Signed-off-by: David S. Miller --- net/caif/chnl_net.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/net/caif/chnl_net.c b/net/caif/chnl_net.c index 20618dd3088..d09340e1523 100644 --- a/net/caif/chnl_net.c +++ b/net/caif/chnl_net.c @@ -103,6 +103,7 @@ static int chnl_recv_cb(struct cflayer *layr, struct cfpkt *pkt) skb->protocol = htons(ETH_P_IPV6); break; default: + kfree_skb(skb); priv->netdev->stats.rx_errors++; return -EINVAL; } @@ -220,14 +221,16 @@ static int chnl_net_start_xmit(struct sk_buff *skb, struct net_device *dev) if (skb->len > priv->netdev->mtu) { pr_warn("Size of skb exceeded MTU\n"); + kfree_skb(skb); dev->stats.tx_errors++; - return -ENOSPC; + return NETDEV_TX_OK; } if (!priv->flowenabled) { pr_debug("dropping packets flow off\n"); + kfree_skb(skb); dev->stats.tx_dropped++; - return NETDEV_TX_BUSY; + return NETDEV_TX_OK; } if (priv->conn_req.protocol == CAIFPROTO_DATAGRAM_LOOP) @@ -242,7 +245,7 @@ static int chnl_net_start_xmit(struct sk_buff *skb, struct net_device *dev) result = priv->chnl.dn->transmit(priv->chnl.dn, pkt); if (result) { dev->stats.tx_dropped++; - return result; + return NETDEV_TX_OK; } /* Update statistics. */ -- cgit v1.2.3-18-g5258 From 5f614e6b7005685b3e34da0742f79389c858c7e1 Mon Sep 17 00:00:00 2001 From: "sjur.brandeland@stericsson.com" Date: Thu, 12 Apr 2012 08:18:08 +0000 Subject: caif-hsi: Free flip_buffer at shutdown MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix memory leak of RX flip-buffer. Signed-off-by: Sjur Brændeland Signed-off-by: David S. Miller --- drivers/net/caif/caif_hsi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/caif/caif_hsi.c b/drivers/net/caif/caif_hsi.c index 9a66e2a910a..d0d9a6fa66f 100644 --- a/drivers/net/caif/caif_hsi.c +++ b/drivers/net/caif/caif_hsi.c @@ -1210,7 +1210,7 @@ int cfhsi_probe(struct platform_device *pdev) static void cfhsi_shutdown(struct cfhsi *cfhsi) { - u8 *tx_buf, *rx_buf; + u8 *tx_buf, *rx_buf, *flip_buf; /* Stop TXing */ netif_tx_stop_all_queues(cfhsi->ndev); @@ -1234,7 +1234,7 @@ static void cfhsi_shutdown(struct cfhsi *cfhsi) /* Store bufferes: will be freed later. */ tx_buf = cfhsi->tx_buf; rx_buf = cfhsi->rx_buf; - + flip_buf = cfhsi->rx_flip_buf; /* Flush transmit queues. */ cfhsi_abort_tx(cfhsi); @@ -1247,6 +1247,7 @@ static void cfhsi_shutdown(struct cfhsi *cfhsi) /* Free buffers. */ kfree(tx_buf); kfree(rx_buf); + kfree(flip_buf); } int cfhsi_remove(struct platform_device *pdev) -- cgit v1.2.3-18-g5258 From d62f8dbb5b7771910f7c4657345df8ac93acb832 Mon Sep 17 00:00:00 2001 From: Kim Lilliestierna XX Date: Thu, 12 Apr 2012 08:18:09 +0000 Subject: caif_hsi: use dev_dbg not dev_err for reporting Use dev_dbg instead of dev_err for reporting in cfhsi_wakeup_cb. Signed-off-by: Kim Lilliestierna Signed-off-by: David S. Miller --- drivers/net/caif/caif_hsi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/caif/caif_hsi.c b/drivers/net/caif/caif_hsi.c index d0d9a6fa66f..9c1c8cd5223 100644 --- a/drivers/net/caif/caif_hsi.c +++ b/drivers/net/caif/caif_hsi.c @@ -744,14 +744,14 @@ static void cfhsi_wake_up(struct work_struct *work) size_t fifo_occupancy = 0; /* Wakeup timeout */ - dev_err(&cfhsi->ndev->dev, "%s: Timeout.\n", + dev_dbg(&cfhsi->ndev->dev, "%s: Timeout.\n", __func__); /* Check FIFO to check if modem has sent something. */ WARN_ON(cfhsi->dev->cfhsi_fifo_occupancy(cfhsi->dev, &fifo_occupancy)); - dev_err(&cfhsi->ndev->dev, "%s: Bytes in FIFO: %u.\n", + dev_dbg(&cfhsi->ndev->dev, "%s: Bytes in FIFO: %u.\n", __func__, (unsigned) fifo_occupancy); /* Check if we misssed the interrupt. */ -- cgit v1.2.3-18-g5258 From 1716a96101c49186bb0b8491922fd3e69030235f Mon Sep 17 00:00:00 2001 From: Gao feng Date: Fri, 6 Apr 2012 00:13:10 +0000 Subject: ipv6: fix problem with expired dst cache If the ipv6 dst cache which copy from the dst generated by ICMPV6 RA packet. this dst cache will not check expire because it has no RTF_EXPIRES flag. So this dst cache will always be used until the dst gc run. Change the struct dst_entry,add a union contains new pointer from and expires. When rt6_info.rt6i_flags has no RTF_EXPIRES flag,the dst.expires has no use. we can use this field to point to where the dst cache copy from. The dst.from is only used in IPV6. rt6_check_expired check if rt6_info.dst.from is expired. ip6_rt_copy only set dst.from when the ort has flag RTF_ADDRCONF and RTF_DEFAULT.then hold the ort. ip6_dst_destroy release the ort. Add some functions to operate the RTF_EXPIRES flag and expires(from) together. and change the code to use these new adding functions. Changes from v5: modify ip6_route_add and ndisc_router_discovery to use new adding functions. Only set dst.from when the ort has flag RTF_ADDRCONF and RTF_DEFAULT.then hold the ort. Signed-off-by: Gao feng Signed-off-by: David S. Miller --- include/net/dst.h | 6 ++++- include/net/ip6_fib.h | 42 ++++++++++++++++++++++++++++++ net/ipv6/addrconf.c | 9 +++---- net/ipv6/ip6_fib.c | 9 +++---- net/ipv6/ndisc.c | 3 +-- net/ipv6/route.c | 71 +++++++++++++++++++++++++++++++-------------------- 6 files changed, 99 insertions(+), 41 deletions(-) diff --git a/include/net/dst.h b/include/net/dst.h index 59c5d18cc38..ff4da42fcfc 100644 --- a/include/net/dst.h +++ b/include/net/dst.h @@ -36,7 +36,11 @@ struct dst_entry { struct net_device *dev; struct dst_ops *ops; unsigned long _metrics; - unsigned long expires; + union { + unsigned long expires; + /* point to where the dst_entry copied from */ + struct dst_entry *from; + }; struct dst_entry *path; struct neighbour __rcu *_neighbour; #ifdef CONFIG_XFRM diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h index b26bb810198..c64778fd5e1 100644 --- a/include/net/ip6_fib.h +++ b/include/net/ip6_fib.h @@ -123,6 +123,48 @@ static inline struct inet6_dev *ip6_dst_idev(struct dst_entry *dst) return ((struct rt6_info *)dst)->rt6i_idev; } +static inline void rt6_clean_expires(struct rt6_info *rt) +{ + if (!(rt->rt6i_flags & RTF_EXPIRES) && rt->dst.from) + dst_release(rt->dst.from); + + rt->rt6i_flags &= ~RTF_EXPIRES; + rt->dst.expires = 0; +} + +static inline void rt6_set_expires(struct rt6_info *rt, unsigned long expires) +{ + if (!(rt->rt6i_flags & RTF_EXPIRES) && rt->dst.from) + dst_release(rt->dst.from); + + rt->rt6i_flags |= RTF_EXPIRES; + rt->dst.expires = expires; +} + +static inline void rt6_update_expires(struct rt6_info *rt, int timeout) +{ + if (!(rt->rt6i_flags & RTF_EXPIRES) && rt->dst.from) + dst_release(rt->dst.from); + + dst_set_expires(&rt->dst, timeout); + rt->rt6i_flags |= RTF_EXPIRES; +} + +static inline void rt6_set_from(struct rt6_info *rt, struct rt6_info *from) +{ + struct dst_entry *new = (struct dst_entry *) from; + + if (!(rt->rt6i_flags & RTF_EXPIRES) && rt->dst.from) { + if (new == rt->dst.from) + return; + dst_release(rt->dst.from); + } + + rt->rt6i_flags &= ~RTF_EXPIRES; + rt->dst.from = new; + dst_hold(new); +} + struct fib6_walker_t { struct list_head lh; struct fib6_node *root, *node; diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 6a3bb6077e1..7d5cb975cc6 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -803,8 +803,7 @@ static void ipv6_del_addr(struct inet6_ifaddr *ifp) ip6_del_rt(rt); rt = NULL; } else if (!(rt->rt6i_flags & RTF_EXPIRES)) { - rt->dst.expires = expires; - rt->rt6i_flags |= RTF_EXPIRES; + rt6_set_expires(rt, expires); } } dst_release(&rt->dst); @@ -1887,11 +1886,9 @@ void addrconf_prefix_rcv(struct net_device *dev, u8 *opt, int len, bool sllao) rt = NULL; } else if (addrconf_finite_timeout(rt_expires)) { /* not infinity */ - rt->dst.expires = jiffies + rt_expires; - rt->rt6i_flags |= RTF_EXPIRES; + rt6_set_expires(rt, jiffies + rt_expires); } else { - rt->rt6i_flags &= ~RTF_EXPIRES; - rt->dst.expires = 0; + rt6_clean_expires(rt); } } else if (valid_lft) { clock_t expires = 0; diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c index 5b27fbcae34..93717435013 100644 --- a/net/ipv6/ip6_fib.c +++ b/net/ipv6/ip6_fib.c @@ -673,11 +673,10 @@ static int fib6_add_rt2node(struct fib6_node *fn, struct rt6_info *rt, &rt->rt6i_gateway)) { if (!(iter->rt6i_flags & RTF_EXPIRES)) return -EEXIST; - iter->dst.expires = rt->dst.expires; - if (!(rt->rt6i_flags & RTF_EXPIRES)) { - iter->rt6i_flags &= ~RTF_EXPIRES; - iter->dst.expires = 0; - } + if (!(rt->rt6i_flags & RTF_EXPIRES)) + rt6_clean_expires(iter); + else + rt6_set_expires(iter, rt->dst.expires); return -EEXIST; } } diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index 3dcdb81ec3e..176b469322a 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -1264,8 +1264,7 @@ static void ndisc_router_discovery(struct sk_buff *skb) } if (rt) - rt->dst.expires = jiffies + (HZ * lifetime); - + rt6_set_expires(rt, jiffies + (HZ * lifetime)); if (ra_msg->icmph.icmp6_hop_limit) { in6_dev->cnf.hop_limit = ra_msg->icmph.icmp6_hop_limit; if (rt) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 3992e26a603..bc4888d902b 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -62,7 +62,7 @@ #include #endif -static struct rt6_info *ip6_rt_copy(const struct rt6_info *ort, +static struct rt6_info *ip6_rt_copy(struct rt6_info *ort, const struct in6_addr *dest); static struct dst_entry *ip6_dst_check(struct dst_entry *dst, u32 cookie); static unsigned int ip6_default_advmss(const struct dst_entry *dst); @@ -285,6 +285,10 @@ static void ip6_dst_destroy(struct dst_entry *dst) rt->rt6i_idev = NULL; in6_dev_put(idev); } + + if (!(rt->rt6i_flags & RTF_EXPIRES) && dst->from) + dst_release(dst->from); + if (peer) { rt->rt6i_peer = NULL; inet_putpeer(peer); @@ -329,8 +333,17 @@ static void ip6_dst_ifdown(struct dst_entry *dst, struct net_device *dev, static __inline__ int rt6_check_expired(const struct rt6_info *rt) { - return (rt->rt6i_flags & RTF_EXPIRES) && - time_after(jiffies, rt->dst.expires); + struct rt6_info *ort = NULL; + + if (rt->rt6i_flags & RTF_EXPIRES) { + if (time_after(jiffies, rt->dst.expires)) + return 1; + } else if (rt->dst.from) { + ort = (struct rt6_info *) rt->dst.from; + return (ort->rt6i_flags & RTF_EXPIRES) && + time_after(jiffies, ort->dst.expires); + } + return 0; } static inline int rt6_need_strict(const struct in6_addr *daddr) @@ -620,12 +633,11 @@ int rt6_route_rcv(struct net_device *dev, u8 *opt, int len, (rt->rt6i_flags & ~RTF_PREF_MASK) | RTF_PREF(pref); if (rt) { - if (!addrconf_finite_timeout(lifetime)) { - rt->rt6i_flags &= ~RTF_EXPIRES; - } else { - rt->dst.expires = jiffies + HZ * lifetime; - rt->rt6i_flags |= RTF_EXPIRES; - } + if (!addrconf_finite_timeout(lifetime)) + rt6_clean_expires(rt); + else + rt6_set_expires(rt, jiffies + HZ * lifetime); + dst_release(&rt->dst); } return 0; @@ -730,7 +742,7 @@ int ip6_ins_rt(struct rt6_info *rt) return __ip6_ins_rt(rt, &info); } -static struct rt6_info *rt6_alloc_cow(const struct rt6_info *ort, +static struct rt6_info *rt6_alloc_cow(struct rt6_info *ort, const struct in6_addr *daddr, const struct in6_addr *saddr) { @@ -954,10 +966,10 @@ struct dst_entry *ip6_blackhole_route(struct net *net, struct dst_entry *dst_ori rt->rt6i_idev = ort->rt6i_idev; if (rt->rt6i_idev) in6_dev_hold(rt->rt6i_idev); - rt->dst.expires = 0; rt->rt6i_gateway = ort->rt6i_gateway; - rt->rt6i_flags = ort->rt6i_flags & ~RTF_EXPIRES; + rt->rt6i_flags = ort->rt6i_flags; + rt6_clean_expires(rt); rt->rt6i_metric = 0; memcpy(&rt->rt6i_dst, &ort->rt6i_dst, sizeof(struct rt6key)); @@ -1019,10 +1031,9 @@ static void ip6_link_failure(struct sk_buff *skb) rt = (struct rt6_info *) skb_dst(skb); if (rt) { - if (rt->rt6i_flags & RTF_CACHE) { - dst_set_expires(&rt->dst, 0); - rt->rt6i_flags |= RTF_EXPIRES; - } else if (rt->rt6i_node && (rt->rt6i_flags & RTF_DEFAULT)) + if (rt->rt6i_flags & RTF_CACHE) + rt6_update_expires(rt, 0); + else if (rt->rt6i_node && (rt->rt6i_flags & RTF_DEFAULT)) rt->rt6i_node->fn_sernum = -1; } } @@ -1289,9 +1300,12 @@ int ip6_route_add(struct fib6_config *cfg) } rt->dst.obsolete = -1; - rt->dst.expires = (cfg->fc_flags & RTF_EXPIRES) ? - jiffies + clock_t_to_jiffies(cfg->fc_expires) : - 0; + + if (cfg->fc_flags & RTF_EXPIRES) + rt6_set_expires(rt, jiffies + + clock_t_to_jiffies(cfg->fc_expires)); + else + rt6_clean_expires(rt); if (cfg->fc_protocol == RTPROT_UNSPEC) cfg->fc_protocol = RTPROT_BOOT; @@ -1736,8 +1750,8 @@ again: features |= RTAX_FEATURE_ALLFRAG; dst_metric_set(&rt->dst, RTAX_FEATURES, features); } - dst_set_expires(&rt->dst, net->ipv6.sysctl.ip6_rt_mtu_expires); - rt->rt6i_flags |= RTF_MODIFIED|RTF_EXPIRES; + rt6_update_expires(rt, net->ipv6.sysctl.ip6_rt_mtu_expires); + rt->rt6i_flags |= RTF_MODIFIED; goto out; } @@ -1765,9 +1779,8 @@ again: * which is 10 mins. After 10 mins the decreased pmtu is expired * and detecting PMTU increase will be automatically happened. */ - dst_set_expires(&nrt->dst, net->ipv6.sysctl.ip6_rt_mtu_expires); - nrt->rt6i_flags |= RTF_DYNAMIC|RTF_EXPIRES; - + rt6_update_expires(nrt, net->ipv6.sysctl.ip6_rt_mtu_expires); + nrt->rt6i_flags |= RTF_DYNAMIC; ip6_ins_rt(nrt); } out: @@ -1799,7 +1812,7 @@ void rt6_pmtu_discovery(const struct in6_addr *daddr, const struct in6_addr *sad * Misc support functions */ -static struct rt6_info *ip6_rt_copy(const struct rt6_info *ort, +static struct rt6_info *ip6_rt_copy(struct rt6_info *ort, const struct in6_addr *dest) { struct net *net = dev_net(ort->dst.dev); @@ -1819,10 +1832,14 @@ static struct rt6_info *ip6_rt_copy(const struct rt6_info *ort, if (rt->rt6i_idev) in6_dev_hold(rt->rt6i_idev); rt->dst.lastuse = jiffies; - rt->dst.expires = 0; rt->rt6i_gateway = ort->rt6i_gateway; - rt->rt6i_flags = ort->rt6i_flags & ~RTF_EXPIRES; + rt->rt6i_flags = ort->rt6i_flags; + if ((ort->rt6i_flags & (RTF_DEFAULT | RTF_ADDRCONF)) == + (RTF_DEFAULT | RTF_ADDRCONF)) + rt6_set_from(rt, ort); + else + rt6_clean_expires(rt); rt->rt6i_metric = 0; #ifdef CONFIG_IPV6_SUBTREES -- cgit v1.2.3-18-g5258 From 9a5d2bd99e0dfe9a31b3c160073ac445ba3d773f Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sun, 8 Apr 2012 10:01:44 +0000 Subject: ppp: Fix race condition with queue start/stop Commit e675f0cc9a872fd152edc0c77acfed19bf28b81e ("ppp: Don't stop and restart queue on every TX packet") introduced a race condition which could leave the net queue stopped even when the channel is no longer busy. By calling netif_stop_queue() from ppp_start_xmit(), based on the return value from ppp_xmit_process() but *after* all the locks have been dropped, we could potentially do so *after* the channel has actually finished transmitting and attempted to re-wake the queue. Fix this by moving the netif_stop_queue() into ppp_xmit_process() under the xmit lock. I hadn't done this previously, because it gets called from other places than ppp_start_xmit(). But I now think it's the better option. The net queue *should* be stopped if the channel becomes congested due to writes from pppd, anyway. Signed-off-by: David Woodhouse Signed-off-by: David S. Miller --- drivers/net/ppp/ppp_generic.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) diff --git a/drivers/net/ppp/ppp_generic.c b/drivers/net/ppp/ppp_generic.c index 33f8c51968b..21d7151fb0a 100644 --- a/drivers/net/ppp/ppp_generic.c +++ b/drivers/net/ppp/ppp_generic.c @@ -235,7 +235,7 @@ struct ppp_net { /* Prototypes. */ static int ppp_unattached_ioctl(struct net *net, struct ppp_file *pf, struct file *file, unsigned int cmd, unsigned long arg); -static int ppp_xmit_process(struct ppp *ppp); +static void ppp_xmit_process(struct ppp *ppp); static void ppp_send_frame(struct ppp *ppp, struct sk_buff *skb); static void ppp_push(struct ppp *ppp); static void ppp_channel_push(struct channel *pch); @@ -969,8 +969,7 @@ ppp_start_xmit(struct sk_buff *skb, struct net_device *dev) put_unaligned_be16(proto, pp); skb_queue_tail(&ppp->file.xq, skb); - if (!ppp_xmit_process(ppp)) - netif_stop_queue(dev); + ppp_xmit_process(ppp); return NETDEV_TX_OK; outf: @@ -1048,11 +1047,10 @@ static void ppp_setup(struct net_device *dev) * Called to do any work queued up on the transmit side * that can now be done. */ -static int +static void ppp_xmit_process(struct ppp *ppp) { struct sk_buff *skb; - int ret = 0; ppp_xmit_lock(ppp); if (!ppp->closing) { @@ -1062,13 +1060,12 @@ ppp_xmit_process(struct ppp *ppp) ppp_send_frame(ppp, skb); /* If there's no work left to do, tell the core net code that we can accept some more. */ - if (!ppp->xmit_pending && !skb_peek(&ppp->file.xq)) { + if (!ppp->xmit_pending && !skb_peek(&ppp->file.xq)) netif_wake_queue(ppp->dev); - ret = 1; - } + else + netif_stop_queue(ppp->dev); } ppp_xmit_unlock(ppp); - return ret; } static inline struct sk_buff * -- cgit v1.2.3-18-g5258 From ca8f4fb21d08747013cce9cf1840aa5bfc31f2d8 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Mon, 9 Apr 2012 00:24:02 +0000 Subject: skbuff: struct ubuf_info callback type safety The skb struct ubuf_info callback gets passed struct ubuf_info itself, not the arg value as the field name and the function signature seem to imply. Rename the arg field to ctx to match usage, add documentation and change the callback argument type to make usage clear and to have compiler check correctness. Signed-off-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/vhost/net.c | 2 +- drivers/vhost/vhost.c | 5 ++--- drivers/vhost/vhost.h | 2 +- include/linux/skbuff.h | 7 ++++--- 4 files changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c index f0da2c32fbd..1f21d2a1e52 100644 --- a/drivers/vhost/net.c +++ b/drivers/vhost/net.c @@ -238,7 +238,7 @@ static void handle_tx(struct vhost_net *net) vq->heads[vq->upend_idx].len = len; ubuf->callback = vhost_zerocopy_callback; - ubuf->arg = vq->ubufs; + ubuf->ctx = vq->ubufs; ubuf->desc = vq->upend_idx; msg.msg_control = ubuf; msg.msg_controllen = sizeof(ubuf); diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c index 947f00d8e09..51e4c1eeec4 100644 --- a/drivers/vhost/vhost.c +++ b/drivers/vhost/vhost.c @@ -1598,10 +1598,9 @@ void vhost_ubuf_put_and_wait(struct vhost_ubuf_ref *ubufs) kfree(ubufs); } -void vhost_zerocopy_callback(void *arg) +void vhost_zerocopy_callback(struct ubuf_info *ubuf) { - struct ubuf_info *ubuf = arg; - struct vhost_ubuf_ref *ubufs = ubuf->arg; + struct vhost_ubuf_ref *ubufs = ubuf->ctx; struct vhost_virtqueue *vq = ubufs->vq; /* set len = 1 to mark this desc buffers done DMA */ diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h index 8dcf4cca6bf..8de1fd5b8ef 100644 --- a/drivers/vhost/vhost.h +++ b/drivers/vhost/vhost.h @@ -188,7 +188,7 @@ bool vhost_enable_notify(struct vhost_dev *, struct vhost_virtqueue *); int vhost_log_write(struct vhost_virtqueue *vq, struct vhost_log *log, unsigned int log_num, u64 len); -void vhost_zerocopy_callback(void *arg); +void vhost_zerocopy_callback(struct ubuf_info *); int vhost_zerocopy_signal_used(struct vhost_virtqueue *vq); #define vq_err(vq, fmt, ...) do { \ diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 70a3f8d4911..775292a66fa 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -238,11 +238,12 @@ enum { /* * The callback notifies userspace to release buffers when skb DMA is done in * lower device, the skb last reference should be 0 when calling this. - * The desc is used to track userspace buffer index. + * The ctx field is used to track device context. + * The desc field is used to track userspace buffer index. */ struct ubuf_info { - void (*callback)(void *); - void *arg; + void (*callback)(struct ubuf_info *); + void *ctx; unsigned long desc; }; -- cgit v1.2.3-18-g5258 From 03662e41c7cff64a776bfb1b3816de4be43de881 Mon Sep 17 00:00:00 2001 From: Tony Zelenoff Date: Wed, 11 Apr 2012 06:15:03 +0000 Subject: atl1: fix kernel panic in case of DMA errors Problem: There was two separate work_struct structures which share one handler. Unfortunately getting atl1_adapter structure from work_struct in case of DMA error was done from incorrect offset which cause kernel panics. Solution: The useless work_struct for DMA error removed and handler name changed to more generic one. Signed-off-by: Tony Zelenoff Signed-off-by: David S. Miller --- drivers/net/ethernet/atheros/atlx/atl1.c | 12 +++++------- drivers/net/ethernet/atheros/atlx/atl1.h | 3 +-- drivers/net/ethernet/atheros/atlx/atlx.c | 2 +- 3 files changed, 7 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/atheros/atlx/atl1.c b/drivers/net/ethernet/atheros/atlx/atl1.c index 40ac4143654..c926857e820 100644 --- a/drivers/net/ethernet/atheros/atlx/atl1.c +++ b/drivers/net/ethernet/atheros/atlx/atl1.c @@ -2476,7 +2476,7 @@ static irqreturn_t atl1_intr(int irq, void *data) "pcie phy link down %x\n", status); if (netif_running(adapter->netdev)) { /* reset MAC */ iowrite32(0, adapter->hw.hw_addr + REG_IMR); - schedule_work(&adapter->pcie_dma_to_rst_task); + schedule_work(&adapter->reset_dev_task); return IRQ_HANDLED; } } @@ -2488,7 +2488,7 @@ static irqreturn_t atl1_intr(int irq, void *data) "pcie DMA r/w error (status = 0x%x)\n", status); iowrite32(0, adapter->hw.hw_addr + REG_IMR); - schedule_work(&adapter->pcie_dma_to_rst_task); + schedule_work(&adapter->reset_dev_task); return IRQ_HANDLED; } @@ -2633,10 +2633,10 @@ static void atl1_down(struct atl1_adapter *adapter) atl1_clean_rx_ring(adapter); } -static void atl1_tx_timeout_task(struct work_struct *work) +static void atl1_reset_dev_task(struct work_struct *work) { struct atl1_adapter *adapter = - container_of(work, struct atl1_adapter, tx_timeout_task); + container_of(work, struct atl1_adapter, reset_dev_task); struct net_device *netdev = adapter->netdev; netif_device_detach(netdev); @@ -3038,12 +3038,10 @@ static int __devinit atl1_probe(struct pci_dev *pdev, (unsigned long)adapter); adapter->phy_timer_pending = false; - INIT_WORK(&adapter->tx_timeout_task, atl1_tx_timeout_task); + INIT_WORK(&adapter->reset_dev_task, atl1_reset_dev_task); INIT_WORK(&adapter->link_chg_task, atlx_link_chg_task); - INIT_WORK(&adapter->pcie_dma_to_rst_task, atl1_tx_timeout_task); - err = register_netdev(netdev); if (err) goto err_common; diff --git a/drivers/net/ethernet/atheros/atlx/atl1.h b/drivers/net/ethernet/atheros/atlx/atl1.h index 109d6da8be9..e04bf4d71e4 100644 --- a/drivers/net/ethernet/atheros/atlx/atl1.h +++ b/drivers/net/ethernet/atheros/atlx/atl1.h @@ -758,9 +758,8 @@ struct atl1_adapter { u16 link_speed; u16 link_duplex; spinlock_t lock; - struct work_struct tx_timeout_task; + struct work_struct reset_dev_task; struct work_struct link_chg_task; - struct work_struct pcie_dma_to_rst_task; struct timer_list phy_config_timer; bool phy_timer_pending; diff --git a/drivers/net/ethernet/atheros/atlx/atlx.c b/drivers/net/ethernet/atheros/atlx/atlx.c index 3cd8837236d..c9e9dc57986 100644 --- a/drivers/net/ethernet/atheros/atlx/atlx.c +++ b/drivers/net/ethernet/atheros/atlx/atlx.c @@ -194,7 +194,7 @@ static void atlx_tx_timeout(struct net_device *netdev) { struct atlx_adapter *adapter = netdev_priv(netdev); /* Do the reset outside of interrupt context */ - schedule_work(&adapter->tx_timeout_task); + schedule_work(&adapter->reset_dev_task); } /* -- cgit v1.2.3-18-g5258 From a8c9cb106fe79c28d6b7f1397652cadd228715ff Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Wed, 11 Apr 2012 22:10:54 +0000 Subject: 8139cp: set intr mask after its handler is registered We set intr mask before its handler is registered, this does not work well when 8139cp is sharing irq line with other devices. As the irq could be enabled by the device before 8139cp's hander is registered which may lead unhandled irq. Fix this by introducing an helper cp_irq_enable() and call it after request_irq(). Signed-off-by: Jason Wang Reviewed-by: Flavio Leitner Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/8139cp.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c index abc79076f86..b3287c0fe27 100644 --- a/drivers/net/ethernet/realtek/8139cp.c +++ b/drivers/net/ethernet/realtek/8139cp.c @@ -958,6 +958,11 @@ static inline void cp_start_hw (struct cp_private *cp) cpw8(Cmd, RxOn | TxOn); } +static void cp_enable_irq(struct cp_private *cp) +{ + cpw16_f(IntrMask, cp_intr_mask); +} + static void cp_init_hw (struct cp_private *cp) { struct net_device *dev = cp->dev; @@ -997,8 +1002,6 @@ static void cp_init_hw (struct cp_private *cp) cpw16(MultiIntr, 0); - cpw16_f(IntrMask, cp_intr_mask); - cpw8_f(Cfg9346, Cfg9346_Lock); } @@ -1130,6 +1133,8 @@ static int cp_open (struct net_device *dev) if (rc) goto err_out_hw; + cp_enable_irq(cp); + netif_carrier_off(dev); mii_check_media(&cp->mii_if, netif_msg_link(cp), true); netif_start_queue(dev); @@ -2031,6 +2036,7 @@ static int cp_resume (struct pci_dev *pdev) /* FIXME: sh*t may happen if the Rx ring buffer is depleted */ cp_init_rings_index (cp); cp_init_hw (cp); + cp_enable_irq(cp); netif_start_queue (dev); spin_lock_irqsave (&cp->lock, flags); -- cgit v1.2.3-18-g5258 From 59a54f3082b9847c1240e24879750e3a03f96754 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 12 Apr 2012 01:11:12 +0000 Subject: drivers/net/ethernet/xilinx/axi ethernet: Correct Copyright Also fix MAINTAINERS file to reflect autorship. Daniel and Ariane changed coding style but not any functional changes in the driver itself. Signed-off-by: Michal Simek Signed-off-by: David S. Miller --- MAINTAINERS | 4 ++-- drivers/net/ethernet/xilinx/xilinx_axienet.h | 4 +--- drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 6 +++--- drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c | 6 +++--- 4 files changed, 9 insertions(+), 11 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 32671e00800..7cef7be8f84 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7577,8 +7577,8 @@ F: Documentation/filesystems/xfs.txt F: fs/xfs/ XILINX AXI ETHERNET DRIVER -M: Ariane Keller -M: Daniel Borkmann +M: Anirudha Sarangi +M: John Linn S: Maintained F: drivers/net/ethernet/xilinx/xilinx_axienet* diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h index cc83af083fd..44b8d2bad8c 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet.h +++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h @@ -2,9 +2,7 @@ * Definitions for Xilinx Axi Ethernet device driver. * * Copyright (c) 2009 Secret Lab Technologies, Ltd. - * Copyright (c) 2010 Xilinx, Inc. All rights reserved. - * Copyright (c) 2012 Daniel Borkmann, - * Copyright (c) 2012 Ariane Keller, + * Copyright (c) 2010 - 2012 Xilinx, Inc. All rights reserved. */ #ifndef XILINX_AXIENET_H diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index 2fcbeba6814..9c365e192a3 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -4,9 +4,9 @@ * Copyright (c) 2008 Nissin Systems Co., Ltd., Yoshio Kashiwagi * Copyright (c) 2005-2008 DLA Systems, David H. Lynch Jr. * Copyright (c) 2008-2009 Secret Lab Technologies Ltd. - * Copyright (c) 2010 Xilinx, Inc. All rights reserved. - * Copyright (c) 2012 Daniel Borkmann, - * Copyright (c) 2012 Ariane Keller, + * Copyright (c) 2010 - 2011 Michal Simek + * Copyright (c) 2010 - 2011 PetaLogix + * Copyright (c) 2010 - 2012 Xilinx, Inc. All rights reserved. * * This is a driver for the Xilinx Axi Ethernet which is used in the Virtex6 * and Spartan6. diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c index d70b6e79f6c..e90e1f46121 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c @@ -2,9 +2,9 @@ * MDIO bus driver for the Xilinx Axi Ethernet device * * Copyright (c) 2009 Secret Lab Technologies, Ltd. - * Copyright (c) 2010 Xilinx, Inc. All rights reserved. - * Copyright (c) 2012 Daniel Borkmann, - * Copyright (c) 2012 Ariane Keller, + * Copyright (c) 2010 - 2011 Michal Simek + * Copyright (c) 2010 - 2011 PetaLogix + * Copyright (c) 2010 - 2012 Xilinx, Inc. All rights reserved. */ #include -- cgit v1.2.3-18-g5258 From 51c61a2838c33dab7b6659b9a3e008bb1b40bc9b Mon Sep 17 00:00:00 2001 From: Matt Renzelmann Date: Fri, 13 Apr 2012 07:59:40 +0000 Subject: ks8851: Fix missing mutex_lock/unlock Move the ks8851_rdreg16 call above the call to request_irq and cache the result for subsequent repeated use. A spurious interrupt may otherwise cause a crash. Thanks to Stephen Boyd, Flavio Leitner, and Ben Hutchings for feedback. Signed-off-by: Matt Renzelmann Signed-off-by: David S. Miller --- drivers/net/ethernet/micrel/ks8851.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/micrel/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c index c722aa607d0..e5dc0757f07 100644 --- a/drivers/net/ethernet/micrel/ks8851.c +++ b/drivers/net/ethernet/micrel/ks8851.c @@ -1418,6 +1418,7 @@ static int __devinit ks8851_probe(struct spi_device *spi) struct net_device *ndev; struct ks8851_net *ks; int ret; + unsigned cider; ndev = alloc_etherdev(sizeof(struct ks8851_net)); if (!ndev) @@ -1484,8 +1485,8 @@ static int __devinit ks8851_probe(struct spi_device *spi) ks8851_soft_reset(ks, GRR_GSR); /* simple check for a valid chip being connected to the bus */ - - if ((ks8851_rdreg16(ks, KS_CIDER) & ~CIDER_REV_MASK) != CIDER_ID) { + cider = ks8851_rdreg16(ks, KS_CIDER); + if ((cider & ~CIDER_REV_MASK) != CIDER_ID) { dev_err(&spi->dev, "failed to read device ID\n"); ret = -ENODEV; goto err_id; @@ -1516,8 +1517,7 @@ static int __devinit ks8851_probe(struct spi_device *spi) } netdev_info(ndev, "revision %d, MAC %pM, IRQ %d, %s EEPROM\n", - CIDER_REV_GET(ks8851_rdreg16(ks, KS_CIDER)), - ndev->dev_addr, ndev->irq, + CIDER_REV_GET(cider), ndev->dev_addr, ndev->irq, ks->rc_ccr & CCR_EEPROM ? "has" : "no"); return 0; -- cgit v1.2.3-18-g5258 From effcc625eb4ab3b10b4744237fd37e8f7dcd6511 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Wed, 28 Mar 2012 11:38:01 -0700 Subject: libertas: fix signedness bug in lbs_auth_to_authtype() Return type for lbs_auth_to_authtype() is changed from "u8" to "int" to return negative error code correctly. Also an error check is added in connect handler for invalid auth type. Reported-by: Dan Carpenter Signed-off-by: Amitkumar Karwar Signed-off-by: Kiran Divekar Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/cfg.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c index 3fa1ecebadf..2fa879b015b 100644 --- a/drivers/net/wireless/libertas/cfg.c +++ b/drivers/net/wireless/libertas/cfg.c @@ -103,7 +103,7 @@ static const u32 cipher_suites[] = { * Convert NL80211's auth_type to the one from Libertas, see chapter 5.9.1 * in the firmware spec */ -static u8 lbs_auth_to_authtype(enum nl80211_auth_type auth_type) +static int lbs_auth_to_authtype(enum nl80211_auth_type auth_type) { int ret = -ENOTSUPP; @@ -1411,7 +1411,12 @@ static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev, goto done; } - lbs_set_authtype(priv, sme); + ret = lbs_set_authtype(priv, sme); + if (ret == -ENOTSUPP) { + wiphy_err(wiphy, "unsupported authtype 0x%x\n", sme->auth_type); + goto done; + } + lbs_set_radio(priv, preamble, 1); /* Do the actual association */ -- cgit v1.2.3-18-g5258 From badc4f07622f0f7093a201638f45e85765f1b5e4 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Wed, 11 Apr 2012 11:52:51 +0200 Subject: brcm80211: smac: resume transmit fifo upon receiving frames There have been reports about not being able to use access-points on channel 12 and 13 or having connectivity issues when these channels were part of the selected regulatory domain. Upon switching to these channels the brcmsmac driver suspends the transmit dma fifos. This patch resumes them upon handing over the first received beacon to mac80211. This patch is to be applied to the stable tree for kernel versions 3.2 and 3.3. Cc: stable@vger.kernel.org Tested-by: Francesco Saverio Schiavarelli Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Brett Rudley Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmsmac/main.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index 231ddf4a674..7083db75b00 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -7614,6 +7614,7 @@ brcms_c_recvctl(struct brcms_c_info *wlc, struct d11rxhdr *rxh, { int len_mpdu; struct ieee80211_rx_status rx_status; + struct ieee80211_hdr *hdr; memset(&rx_status, 0, sizeof(rx_status)); prep_mac80211_status(wlc, rxh, p, &rx_status); @@ -7623,6 +7624,13 @@ brcms_c_recvctl(struct brcms_c_info *wlc, struct d11rxhdr *rxh, skb_pull(p, D11_PHY_HDR_LEN); __skb_trim(p, len_mpdu); + /* unmute transmit */ + if (wlc->hw->suspended_fifos) { + hdr = (struct ieee80211_hdr *)p->data; + if (ieee80211_is_beacon(hdr->frame_control)) + brcms_b_mute(wlc->hw, false); + } + memcpy(IEEE80211_SKB_RXCB(p), &rx_status, sizeof(rx_status)); ieee80211_rx_irqsafe(wlc->pub->ieee_hw, p); } -- cgit v1.2.3-18-g5258 From e55a4046dab28c440c96890bdddcf02dc8981f2d Mon Sep 17 00:00:00 2001 From: Lukasz Kucharczyk Date: Wed, 11 Apr 2012 14:55:10 +0200 Subject: cfg80211: fix interface combinations check. Signed-off-by: Lukasz Kucharczyk Cc: stable@vger.kernel.org Signed-off-by: John W. Linville --- net/wireless/util.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/wireless/util.c b/net/wireless/util.c index 1b7a08df933..957f2562161 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -989,7 +989,7 @@ int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev, if (rdev->wiphy.software_iftypes & BIT(iftype)) continue; for (j = 0; j < c->n_limits; j++) { - if (!(limits[j].types & iftype)) + if (!(limits[j].types & BIT(iftype))) continue; if (limits[j].max < num[iftype]) goto cont; -- cgit v1.2.3-18-g5258 From 32b92f4f3f261697a49f944e31920dbcbbd4ad01 Mon Sep 17 00:00:00 2001 From: Jonathan Bither Date: Thu, 12 Apr 2012 06:13:33 -0400 Subject: ath5k: fix undefined 'THIS_MODULE' When cross compiling ath5k for a Mips machine with kernel 3.2.14 the compilation fails with "/ath5k/ahb.c:231:12: error: 'THIS_MODULE' undeclared here (not in a function)" Fix the build by including Signed-off-by: Jonathan Bither Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/ahb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/ath/ath5k/ahb.c b/drivers/net/wireless/ath/ath5k/ahb.c index 8faa129da5a..47b6c35077d 100644 --- a/drivers/net/wireless/ath/ath5k/ahb.c +++ b/drivers/net/wireless/ath/ath5k/ahb.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include "ath5k.h" #include "debug.h" -- cgit v1.2.3-18-g5258 From 2db0d2ba97801fb57c91e99b9e22b2a24c32d3d7 Mon Sep 17 00:00:00 2001 From: Jonathan Bither Date: Thu, 12 Apr 2012 07:03:09 -0400 Subject: ath5k: unmap io memory on probe failure Signed-off-by: Jonathan Bither Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/ahb.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath5k/ahb.c b/drivers/net/wireless/ath/ath5k/ahb.c index 47b6c35077d..8c50d9d19d7 100644 --- a/drivers/net/wireless/ath/ath5k/ahb.c +++ b/drivers/net/wireless/ath/ath5k/ahb.c @@ -120,7 +120,7 @@ static int ath_ahb_probe(struct platform_device *pdev) if (res == NULL) { dev_err(&pdev->dev, "no IRQ resource found\n"); ret = -ENXIO; - goto err_out; + goto err_iounmap; } irq = res->start; @@ -129,7 +129,7 @@ static int ath_ahb_probe(struct platform_device *pdev) if (hw == NULL) { dev_err(&pdev->dev, "no memory for ieee80211_hw\n"); ret = -ENOMEM; - goto err_out; + goto err_iounmap; } ah = hw->priv; @@ -186,6 +186,8 @@ static int ath_ahb_probe(struct platform_device *pdev) err_free_hw: ieee80211_free_hw(hw); platform_set_drvdata(pdev, NULL); + err_iounmap: + iounmap(mem); err_out: return ret; } -- cgit v1.2.3-18-g5258 From 75600abf1991657580233570400009e85f861787 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 12 Apr 2012 20:36:31 +0200 Subject: ath9k: wake up the hardware from full sleep when idle is turned off The hardware needs a reset to recover from full sleep. Issue this reset directly in the ath9k_config call that turns off idle, otherwise tx remains dead until the first channel change after the idle state change Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 2504ab00558..798ea57252b 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1548,6 +1548,7 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed) struct ath_hw *ah = sc->sc_ah; struct ath_common *common = ath9k_hw_common(ah); struct ieee80211_conf *conf = &hw->conf; + bool reset_channel = false; ath9k_ps_wakeup(sc); mutex_lock(&sc->mutex); @@ -1556,6 +1557,12 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed) sc->ps_idle = !!(conf->flags & IEEE80211_CONF_IDLE); if (sc->ps_idle) ath_cancel_work(sc); + else + /* + * The chip needs a reset to properly wake up from + * full sleep + */ + reset_channel = ah->chip_fullsleep; } /* @@ -1584,7 +1591,7 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed) } } - if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { + if ((changed & IEEE80211_CONF_CHANGE_CHANNEL) || reset_channel) { struct ieee80211_channel *curchan = hw->conf.channel; int pos = curchan->hw_value; int old_pos = -1; -- cgit v1.2.3-18-g5258 From 428ca8a7065354877db63ceabfc493107686eebe Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Thu, 12 Apr 2012 19:00:35 -0700 Subject: mwifiex: update pcie8766 scratch register addresses The scratch register addresses have been changed for newer chips. Since the old chip was never shipped and it will not be supported any more, just update register addresses to support the new chips. Cc: # 3.2.y, 3.3.y Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/pcie.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/net/wireless/mwifiex/pcie.h b/drivers/net/wireless/mwifiex/pcie.h index 445ff21772e..2f218f9a3fd 100644 --- a/drivers/net/wireless/mwifiex/pcie.h +++ b/drivers/net/wireless/mwifiex/pcie.h @@ -48,15 +48,15 @@ #define PCIE_HOST_INT_STATUS_MASK 0xC3C #define PCIE_SCRATCH_2_REG 0xC40 #define PCIE_SCRATCH_3_REG 0xC44 -#define PCIE_SCRATCH_4_REG 0xCC0 -#define PCIE_SCRATCH_5_REG 0xCC4 -#define PCIE_SCRATCH_6_REG 0xCC8 -#define PCIE_SCRATCH_7_REG 0xCCC -#define PCIE_SCRATCH_8_REG 0xCD0 -#define PCIE_SCRATCH_9_REG 0xCD4 -#define PCIE_SCRATCH_10_REG 0xCD8 -#define PCIE_SCRATCH_11_REG 0xCDC -#define PCIE_SCRATCH_12_REG 0xCE0 +#define PCIE_SCRATCH_4_REG 0xCD0 +#define PCIE_SCRATCH_5_REG 0xCD4 +#define PCIE_SCRATCH_6_REG 0xCD8 +#define PCIE_SCRATCH_7_REG 0xCDC +#define PCIE_SCRATCH_8_REG 0xCE0 +#define PCIE_SCRATCH_9_REG 0xCE4 +#define PCIE_SCRATCH_10_REG 0xCE8 +#define PCIE_SCRATCH_11_REG 0xCEC +#define PCIE_SCRATCH_12_REG 0xCF0 #define CPU_INTR_DNLD_RDY BIT(0) #define CPU_INTR_DOOR_BELL BIT(1) -- cgit v1.2.3-18-g5258 From 3c5e979bd037888dd7d722da22da4b43659af485 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 12 Apr 2012 05:54:09 +0000 Subject: net: smsc911x: fix skb handling in receive path The SMSC911x driver resets the ->head, ->data and ->tail pointers in the skb on the reset path in order to avoid buffer overflow due to packet padding performed by the hardware. This patch fixes the receive path so that the skb pointers are fixed up after the data has been read from the device, The error path is also fixed to use number of words consistently and prevent erroneous FIFO fastforwarding when skipping over bad data. Signed-off-by: Will Deacon Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smsc911x.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index 4a697102707..5aa2dbe2bfb 100644 --- a/drivers/net/ethernet/smsc/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c @@ -1166,10 +1166,8 @@ smsc911x_rx_counterrors(struct net_device *dev, unsigned int rxstat) /* Quickly dumps bad packets */ static void -smsc911x_rx_fastforward(struct smsc911x_data *pdata, unsigned int pktbytes) +smsc911x_rx_fastforward(struct smsc911x_data *pdata, unsigned int pktwords) { - unsigned int pktwords = (pktbytes + NET_IP_ALIGN + 3) >> 2; - if (likely(pktwords >= 4)) { unsigned int timeout = 500; unsigned int val; @@ -1233,7 +1231,7 @@ static int smsc911x_poll(struct napi_struct *napi, int budget) continue; } - skb = netdev_alloc_skb(dev, pktlength + NET_IP_ALIGN); + skb = netdev_alloc_skb(dev, pktwords << 2); if (unlikely(!skb)) { SMSC_WARN(pdata, rx_err, "Unable to allocate skb for rx packet"); @@ -1243,14 +1241,12 @@ static int smsc911x_poll(struct napi_struct *napi, int budget) break; } - skb->data = skb->head; - skb_reset_tail_pointer(skb); + pdata->ops->rx_readfifo(pdata, + (unsigned int *)skb->data, pktwords); /* Align IP on 16B boundary */ skb_reserve(skb, NET_IP_ALIGN); skb_put(skb, pktlength - 4); - pdata->ops->rx_readfifo(pdata, - (unsigned int *)skb->head, pktwords); skb->protocol = eth_type_trans(skb, dev); skb_checksum_none_assert(skb); netif_receive_skb(skb); @@ -1565,7 +1561,7 @@ static int smsc911x_open(struct net_device *dev) smsc911x_reg_write(pdata, FIFO_INT, temp); /* set RX Data offset to 2 bytes for alignment */ - smsc911x_reg_write(pdata, RX_CFG, (2 << 8)); + smsc911x_reg_write(pdata, RX_CFG, (NET_IP_ALIGN << 8)); /* enable NAPI polling before enabling RX interrupts */ napi_enable(&pdata->napi); -- cgit v1.2.3-18-g5258 From 6e48b550d1f5f1919e6500547ae14a73fbf66c7b Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 13 Apr 2012 09:52:59 +0100 Subject: tracing: Fix build breakage without CONFIG_PERF_EVENTS (again) Today's -next fails to link for me: kernel/built-in.o:(.data+0x178e50): undefined reference to `perf_ftrace_event_register' It looks like multiple fixes have been merged for the issue fixed by commit fa73dc9 (tracing: Fix build breakage without CONFIG_PERF_EVENTS) though I can't identify the other changes that have gone in at the minute, it's possible that the changes which caused the breakage fixed by the previous commit got dropped but the fix made it in. Link: http://lkml.kernel.org/r/1334307179-21255-1-git-send-email-broonie@opensource.wolfsonmicro.com Cc: Frederic Weisbecker Cc: Ingo Molnar Signed-off-by: Mark Brown Signed-off-by: Steven Rostedt --- kernel/trace/trace.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 95059f091a2..f95d65da6db 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -836,11 +836,11 @@ extern const char *__stop___trace_bprintk_fmt[]; filter) #include "trace_entries.h" -#ifdef CONFIG_FUNCTION_TRACER +#if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_FUNCTION_TRACER) int perf_ftrace_event_register(struct ftrace_event_call *call, enum trace_reg type, void *data); #else #define perf_ftrace_event_register NULL -#endif /* CONFIG_FUNCTION_TRACER */ +#endif #endif /* _LINUX_KERNEL_TRACE_H */ -- cgit v1.2.3-18-g5258 From 92fe173391b3e0d0a7212fa8b9d72c8d61f31c26 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 12 Apr 2012 06:27:03 +0000 Subject: e1000e: issues in Sx on 82577/8/9 A workaround was previously put in the driver to reset the device when transitioning to Sx in order to activate the changed settings of the PHY OEM bits (Low Power Link Up, or LPLU, and GbE disable configuration) for 82577/8/9 devices. After further review, it was found such a reset can cause the 82579 to confuse which version of 82579 it actually is and broke LPLU on all 82577/8/9 devices. The workaround during an S0->Sx transition on 82579 (instead of resetting the PHY) is to restart auto-negotiation after the OEM bits are configured; the restart of auto-negotiation activates the new OEM bits as does the reset. With 82577/8, the reset is changed to a generic reset which fixes the LPLU bits getting set wrong. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/ich8lan.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 64c76443a7a..b461c24945e 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -1310,10 +1310,6 @@ static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state) if (mac_reg & E1000_PHY_CTRL_D0A_LPLU) oem_reg |= HV_OEM_BITS_LPLU; - - /* Set Restart auto-neg to activate the bits */ - if (!hw->phy.ops.check_reset_block(hw)) - oem_reg |= HV_OEM_BITS_RESTART_AN; } else { if (mac_reg & (E1000_PHY_CTRL_GBE_DISABLE | E1000_PHY_CTRL_NOND0A_GBE_DISABLE)) @@ -1324,6 +1320,11 @@ static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state) oem_reg |= HV_OEM_BITS_LPLU; } + /* Set Restart auto-neg to activate the bits */ + if ((d0_state || (hw->mac.type != e1000_pchlan)) && + !hw->phy.ops.check_reset_block(hw)) + oem_reg |= HV_OEM_BITS_RESTART_AN; + ret_val = hw->phy.ops.write_reg_locked(hw, HV_OEM_BITS, oem_reg); release: @@ -3682,7 +3683,11 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw) if (hw->mac.type >= e1000_pchlan) { e1000_oem_bits_config_ich8lan(hw, false); - e1000_phy_hw_reset_ich8lan(hw); + + /* Reset PHY to activate OEM bits on 82577/8 */ + if (hw->mac.type == e1000_pchlan) + e1000e_phy_hw_reset_generic(hw); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) return; -- cgit v1.2.3-18-g5258 From c509e754af96882eb46130e215cc4aa8f763d4ac Mon Sep 17 00:00:00 2001 From: Don Skidmore Date: Thu, 5 Apr 2012 08:12:05 +0000 Subject: ixgbe: fix WoL issue with fiber There are times we turn of the laser before shutdown. This is a bad thing if we want to wake on lan to work so now we make sure the laser is on before shutdown if we support WoL. Signed-off-by: Don Skidmore Tested-by: Stephen Ko Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 3e26b1f9ac7..dac7c01f833 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -4893,6 +4893,16 @@ static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake) if (wufc) { ixgbe_set_rx_mode(netdev); + /* + * enable the optics for both mult-speed fiber and + * 82599 SFP+ fiber as we can WoL. + */ + if (hw->mac.ops.enable_tx_laser && + (hw->phy.multispeed_fiber || + (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber && + hw->mac.type == ixgbe_mac_82599EB))) + hw->mac.ops.enable_tx_laser(hw); + /* turn on all-multi mode if wake on multicast is enabled */ if (wufc & IXGBE_WUFC_MC) { fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); -- cgit v1.2.3-18-g5258 From 8a9a0ea6032186e3030419262678d652b88bf6a8 Mon Sep 17 00:00:00 2001 From: Davide Ciminaghi Date: Fri, 13 Apr 2012 04:48:25 +0000 Subject: net/ethernet: ks8851_mll fix rx frame buffer overflow At the beginning of ks_rcv(), a for loop retrieves the header information relevant to all the frames stored in the mac's internal buffers. The number of pending frames is stored as an 8 bits field in KS_RXFCTR. If interrupts are disabled long enough to allow for more than 32 frames to accumulate in the MAC's internal buffers, a buffer overflow occurs. This patch fixes the problem by making the driver's frame_head_info buffer big enough. Well actually, since the chip appears to have 12K of internal rx buffers and the shortest ethernet frame should be 64 bytes long, maybe the limit could be set to 12*1024/64 = 192 frames, but 255 should be safer. Signed-off-by: Davide Ciminaghi Signed-off-by: Raffaele Recalcati Signed-off-by: David S. Miller --- drivers/net/ethernet/micrel/ks8851_mll.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/micrel/ks8851_mll.c b/drivers/net/ethernet/micrel/ks8851_mll.c index b8104d9f408..5ffde23ac8f 100644 --- a/drivers/net/ethernet/micrel/ks8851_mll.c +++ b/drivers/net/ethernet/micrel/ks8851_mll.c @@ -40,7 +40,7 @@ #define DRV_NAME "ks8851_mll" static u8 KS_DEFAULT_MAC_ADDRESS[] = { 0x00, 0x10, 0xA1, 0x86, 0x95, 0x11 }; -#define MAX_RECV_FRAMES 32 +#define MAX_RECV_FRAMES 255 #define MAX_BUF_SIZE 2048 #define TX_BUF_SIZE 2000 #define RX_BUF_SIZE 2000 -- cgit v1.2.3-18-g5258 From d7de8649f34d45041409d1af4ba4a521971a9075 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Wed, 11 Apr 2012 17:12:38 +0200 Subject: x86/amd: Remove broken links from comment and kernel message Signed-off-by: Andreas Herrmann Link: http://lkml.kernel.org/r/20120411151238.GA4794@alberich.amd.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/amd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 0a44b90602b..1248f9ceabc 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -26,7 +26,8 @@ * contact AMD for precise details and a CPU swap. * * See http://www.multimania.com/poulot/k6bug.html - * http://www.amd.com/K6/k6docs/revgd.html + * and section 2.6.2 of "AMD-K6 Processor Revision Guide - Model 6" + * (Publication # 21266 Issue Date: August 1998) * * The following test is erm.. interesting. AMD neglected to up * the chip setting when fixing the bug but they also tweaked some @@ -94,7 +95,6 @@ static void __cpuinit init_amd_k6(struct cpuinfo_x86 *c) "system stability may be impaired when more than 32 MB are used.\n"); else printk(KERN_CONT "probably OK (after B9730xxxx).\n"); - printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n"); } /* K6 with old style WHCR */ -- cgit v1.2.3-18-g5258 From 9e755756e4a22784abfb001688357745ea8ca97c Mon Sep 17 00:00:00 2001 From: David Ahern Date: Sun, 15 Apr 2012 20:54:15 -0600 Subject: perf report: Fix crash showing warning related to kernel maps While testing https://lkml.org/lkml/2012/4/10/123 I hit this crash: (gdb) bt 0 0x000000000042000f in __cmd_report (rep=0x7fff80cec580) at builtin-report.c:380 1 cmd_report (argc=0, argv=, prefix=) at builtin-report.c:759 2 0x0000000000414513 in run_builtin (p=0x7724a8, argc=3, argv=0x7fff80ceca70) at perf.c:273 3 0x0000000000413d41 in handle_internal_command (argv=0x7fff80ceca70, argc=3) at perf.c:345 4 run_argv (argv=0x7fff80cec880, argcp=0x7fff80cec88c) at perf.c:389 5 main (argc=3, argv=0x7fff80ceca70) at perf.c:487 kernel_map can be NULL, so need to handle it while dumping a warning to user. v2: - fixed RB_EMPTY_ROOT check -- desc takes the altnerative output when RB_EMPTY_ROOT is false. Signed-off-by: David Ahern Cc: Ingo Molnar Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Namhyung Kim Link: http://lkml.kernel.org/r/1334544855-55021-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-report.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c index 2e317438980..cdae9b2db1c 100644 --- a/tools/perf/builtin-report.c +++ b/tools/perf/builtin-report.c @@ -374,16 +374,23 @@ static int __cmd_report(struct perf_report *rep) (kernel_map->dso->hit && (kernel_kmap->ref_reloc_sym == NULL || kernel_kmap->ref_reloc_sym->addr == 0))) { - const struct dso *kdso = kernel_map->dso; + const char *desc = + "As no suitable kallsyms nor vmlinux was found, kernel samples\n" + "can't be resolved."; + + if (kernel_map) { + const struct dso *kdso = kernel_map->dso; + if (!RB_EMPTY_ROOT(&kdso->symbols[MAP__FUNCTION])) { + desc = "If some relocation was applied (e.g. " + "kexec) symbols may be misresolved."; + } + } ui__warning( "Kernel address maps (/proc/{kallsyms,modules}) were restricted.\n\n" "Check /proc/sys/kernel/kptr_restrict before running 'perf record'.\n\n%s\n\n" "Samples in kernel modules can't be resolved as well.\n\n", - RB_EMPTY_ROOT(&kdso->symbols[MAP__FUNCTION]) ? -"As no suitable kallsyms nor vmlinux was found, kernel samples\n" -"can't be resolved." : -"If some relocation was applied (e.g. kexec) symbols may be misresolved."); + desc); } if (dump_trace) { -- cgit v1.2.3-18-g5258 From 32998cc96a76cc3f42f66b55fec301377e439c66 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 14 Apr 2012 14:38:54 +0200 Subject: bcma: use fallback sprom if no on chip sprom is available bcma should check for a fallback sprom every time it can not find a sprom on the card itself or a normal external sprom mapped into the memory of the chip. When otp sprom support was introduced it tried to read out the sprom from the wireless chip also if no otp sprom was available. This caused a Data bus error in bcma_sprom_get() when reading out the sprom for the SoC. This fixes a regression introduced in commit: commit 10d8493cd9efd38b1947b7a74276dbdc8311aa1a Author: Arend van Spriel Date: Tue Mar 6 15:50:48 2012 +0100 bcma: add support for on-chip OTP memory used for SPROM storage This patch was tested on a Netgear WNDR3400 (Broadcom BCM4718 SoC). Reported-by: Nick Bowler Signed-off-by: Hauke Mehrtens Acked-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/bcma/sprom.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/bcma/sprom.c b/drivers/bcma/sprom.c index cdcf75c0954..3e2a6002aae 100644 --- a/drivers/bcma/sprom.c +++ b/drivers/bcma/sprom.c @@ -404,16 +404,19 @@ int bcma_sprom_get(struct bcma_bus *bus) return -EOPNOTSUPP; if (!bcma_sprom_ext_available(bus)) { + bool sprom_onchip; + /* * External SPROM takes precedence so check * on-chip OTP only when no external SPROM * is present. */ - if (bcma_sprom_onchip_available(bus)) { + sprom_onchip = bcma_sprom_onchip_available(bus); + if (sprom_onchip) { /* determine offset */ offset = bcma_sprom_onchip_offset(bus); } - if (!offset) { + if (!offset || !sprom_onchip) { /* * Maybe there is no SPROM on the device? * Now we ask the arch code if there is some sprom -- cgit v1.2.3-18-g5258 From b1994304fc399f5d3a5368c81111d713490c4799 Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Sun, 15 Apr 2012 16:06:04 +0100 Subject: x86, efi: Add dedicated EFI stub entry point The method used to work out whether we were booted by EFI firmware or via a boot loader is broken. Because efi_main() is always executed when booting from a boot loader we will dereference invalid pointers either on the stack (CONFIG_X86_32) or contained in %rdx (CONFIG_X86_64) when searching for an EFI System Table signature. Instead of dereferencing these invalid system table pointers, add a new entry point that is only used when booting from EFI firmware, when we know the pointer arguments will be valid. With this change legacy boot loaders will no longer execute efi_main(), but will instead skip EFI stub initialisation completely. [ hpa: Marking this for urgent/stable since it is a regression when the option is enabled; without the option the patch has no effect ] Signed-off-by: Matt Fleming Link: http://lkml.kernel.org/r/1334584744.26997.14.camel@mfleming-mobl1.ger.corp.intel.com Reported-by: Jordan Justen Signed-off-by: H. Peter Anvin Cc: v3.3 --- arch/x86/boot/compressed/head_32.S | 14 +++++++++++--- arch/x86/boot/compressed/head_64.S | 22 ++++++++++++++++------ arch/x86/boot/tools/build.c | 15 +++++++++++---- 3 files changed, 38 insertions(+), 13 deletions(-) diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S index a0559930a18..c85e3ac99bb 100644 --- a/arch/x86/boot/compressed/head_32.S +++ b/arch/x86/boot/compressed/head_32.S @@ -33,6 +33,9 @@ __HEAD ENTRY(startup_32) #ifdef CONFIG_EFI_STUB + jmp preferred_addr + + .balign 0x10 /* * We don't need the return address, so set up the stack so * efi_main() can find its arugments. @@ -41,12 +44,17 @@ ENTRY(startup_32) call efi_main cmpl $0, %eax - je preferred_addr movl %eax, %esi - call 1f + jne 2f 1: + /* EFI init failed, so hang. */ + hlt + jmp 1b +2: + call 3f +3: popl %eax - subl $1b, %eax + subl $3b, %eax subl BP_pref_address(%esi), %eax add BP_code32_start(%esi), %eax leal preferred_addr(%eax), %eax diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S index 558d76ce23b..87e03a13d8e 100644 --- a/arch/x86/boot/compressed/head_64.S +++ b/arch/x86/boot/compressed/head_64.S @@ -200,18 +200,28 @@ ENTRY(startup_64) * entire text+data+bss and hopefully all of memory. */ #ifdef CONFIG_EFI_STUB - pushq %rsi + /* + * The entry point for the PE/COFF executable is 0x210, so only + * legacy boot loaders will execute this jmp. + */ + jmp preferred_addr + + .org 0x210 mov %rcx, %rdi mov %rdx, %rsi call efi_main - popq %rsi - cmpq $0,%rax - je preferred_addr movq %rax,%rsi - call 1f + cmpq $0,%rax + jne 2f 1: + /* EFI init failed, so hang. */ + hlt + jmp 1b +2: + call 3f +3: popq %rax - subq $1b, %rax + subq $3b, %rax subq BP_pref_address(%rsi), %rax add BP_code32_start(%esi), %eax leaq preferred_addr(%rax), %rax diff --git a/arch/x86/boot/tools/build.c b/arch/x86/boot/tools/build.c index ed549767a23..24443a33208 100644 --- a/arch/x86/boot/tools/build.c +++ b/arch/x86/boot/tools/build.c @@ -205,8 +205,13 @@ int main(int argc, char ** argv) put_unaligned_le32(file_sz, &buf[pe_header + 0x50]); #ifdef CONFIG_X86_32 - /* Address of entry point */ - put_unaligned_le32(i, &buf[pe_header + 0x28]); + /* + * Address of entry point. + * + * The EFI stub entry point is +16 bytes from the start of + * the .text section. + */ + put_unaligned_le32(i + 16, &buf[pe_header + 0x28]); /* .text size */ put_unaligned_le32(file_sz, &buf[pe_header + 0xb0]); @@ -217,9 +222,11 @@ int main(int argc, char ** argv) /* * Address of entry point. startup_32 is at the beginning and * the 64-bit entry point (startup_64) is always 512 bytes - * after. + * after. The EFI stub entry point is 16 bytes after that, as + * the first instruction allows legacy loaders to jump over + * the EFI stub initialisation */ - put_unaligned_le32(i + 512, &buf[pe_header + 0x28]); + put_unaligned_le32(i + 528, &buf[pe_header + 0x28]); /* .text size */ put_unaligned_le32(file_sz, &buf[pe_header + 0xc0]); -- cgit v1.2.3-18-g5258 From 68894632afb2729a1d8785c877840953894c7283 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Mon, 2 Apr 2012 18:06:48 +0200 Subject: x86/platform: Remove incorrect error message in x86_default_fixup_cpu_id() It's only called from amd.c:srat_detect_node(). The introduced condition for calling the fixup code is true for all AMD multi-node processors, e.g. Magny-Cours and Interlagos. There we have 2 NUMA nodes on one socket. Thus there are cores having different numa-node-id but with equal phys_proc_id. There is no point to print error messages in such a situation. The confusing/misleading error message was introduced with commit 64be4c1c2428e148de6081af235e2418e6a66dda ("x86: Add x86_init platform override to fix up NUMA core numbering"). Remove the default fixup function (especially the error message) and replace it by a NULL pointer check, move the Numascale-specific condition for calling the fixup into the fixup-function itself and slightly adapt the comment. Signed-off-by: Andreas Herrmann Acked-by: Borislav Petkov Cc: Cc: Cc: Cc: Link: http://lkml.kernel.org/r/20120402160648.GR27684@alberich.amd.com Signed-off-by: Ingo Molnar --- arch/x86/include/asm/x86_init.h | 1 - arch/x86/kernel/apic/apic_numachip.c | 7 +++++-- arch/x86/kernel/cpu/amd.c | 7 ++++--- arch/x86/kernel/cpu/common.c | 9 --------- arch/x86/kernel/x86_init.c | 1 - 5 files changed, 9 insertions(+), 16 deletions(-) diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h index baaca8defec..764b66a4cf8 100644 --- a/arch/x86/include/asm/x86_init.h +++ b/arch/x86/include/asm/x86_init.h @@ -195,6 +195,5 @@ extern struct x86_msi_ops x86_msi; extern void x86_init_noop(void); extern void x86_init_uint_noop(unsigned int unused); -extern void x86_default_fixup_cpu_id(struct cpuinfo_x86 *c, int node); #endif diff --git a/arch/x86/kernel/apic/apic_numachip.c b/arch/x86/kernel/apic/apic_numachip.c index 899803e0321..23e75422e01 100644 --- a/arch/x86/kernel/apic/apic_numachip.c +++ b/arch/x86/kernel/apic/apic_numachip.c @@ -207,8 +207,11 @@ static void __init map_csrs(void) static void fixup_cpu_id(struct cpuinfo_x86 *c, int node) { - c->phys_proc_id = node; - per_cpu(cpu_llc_id, smp_processor_id()) = node; + + if (c->phys_proc_id != node) { + c->phys_proc_id = node; + per_cpu(cpu_llc_id, smp_processor_id()) = node; + } } static int __init numachip_system_init(void) diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 1248f9ceabc..1c67ca100e4 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -353,10 +353,11 @@ static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c) node = per_cpu(cpu_llc_id, cpu); /* - * If core numbers are inconsistent, it's likely a multi-fabric platform, - * so invoke platform-specific handler + * On multi-fabric platform (e.g. Numascale NumaChip) a + * platform-specific handler needs to be called to fixup some + * IDs of the CPU. */ - if (c->phys_proc_id != node) + if (x86_cpuinit.fixup_cpu_id) x86_cpuinit.fixup_cpu_id(c, node); if (!node_online(node)) { diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 67e258362a3..cf79302198a 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -1162,15 +1162,6 @@ static void dbg_restore_debug_regs(void) #define dbg_restore_debug_regs() #endif /* ! CONFIG_KGDB */ -/* - * Prints an error where the NUMA and configured core-number mismatch and the - * platform didn't override this to fix it up - */ -void __cpuinit x86_default_fixup_cpu_id(struct cpuinfo_x86 *c, int node) -{ - pr_err("NUMA core number %d differs from configured core number %d\n", node, c->phys_proc_id); -} - /* * cpu_init() initializes state that is per-CPU. Some data is already * initialized (naturally) in the bootstrap process, such as the GDT diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c index e9f265fd79a..9cf71d0b2d3 100644 --- a/arch/x86/kernel/x86_init.c +++ b/arch/x86/kernel/x86_init.c @@ -93,7 +93,6 @@ struct x86_init_ops x86_init __initdata = { struct x86_cpuinit_ops x86_cpuinit __cpuinitdata = { .early_percpu_clock_init = x86_init_noop, .setup_percpu_clockev = setup_secondary_APIC_clock, - .fixup_cpu_id = x86_default_fixup_cpu_id, }; static void default_nmi_init(void) { }; -- cgit v1.2.3-18-g5258 From 6ffd7bdbf8516d691974d21098278af65d4817a5 Mon Sep 17 00:00:00 2001 From: Otavio Salvador Date: Wed, 11 Apr 2012 09:44:30 -0300 Subject: perf tools: Drop CROSS_COMPILE from flex and bison calls The flex and bison tools generate arch-independent C code so its binaries are not prefixed with the target-arch prefix. With this patch the Linux 3.4-rc2 can be successfuly build on OE-Core. Signed-off-by: Otavio Salvador Link: http://lkml.kernel.org/r/1334148270-13139-1-git-send-email-otavio@ossystems.com.br Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/perf/Makefile b/tools/perf/Makefile index 03059e75665..9bf3fc75934 100644 --- a/tools/perf/Makefile +++ b/tools/perf/Makefile @@ -234,8 +234,8 @@ endif export PERL_PATH -FLEX = $(CROSS_COMPILE)flex -BISON= $(CROSS_COMPILE)bison +FLEX = flex +BISON= bison $(OUTPUT)util/parse-events-flex.c: util/parse-events.l $(QUIET_FLEX)$(FLEX) --header-file=$(OUTPUT)util/parse-events-flex.h -t util/parse-events.l > $(OUTPUT)util/parse-events-flex.c -- cgit v1.2.3-18-g5258 From a49bcabedc18319f673319d5e71b5751e3978179 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Wed, 11 Apr 2012 23:23:41 +0200 Subject: can: usb: PCAN-USB Pro: fix mem leaks in pcan_usb_pro_init() on error paths If either call to pcan_usb_pro_send_req() in drivers/net/can/usb/peak_usb/pcan_usb_pro.c::pcan_usb_pro_init() fails, we'll leak the memory we allocated to 'usb_if' with kzalloc() when the 'usb_if' variable goes out of scope without having been assigned to anything as we 'return err;'. Fix this by adding appropriate kfree(usb_if) calls to the error paths. Signed-off-by: Jesper Juhl Acked-by: Stephane Grosjean Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/peak_usb/pcan_usb_pro.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c index 5234586dff1..629c4ba5d49 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c @@ -875,6 +875,7 @@ static int pcan_usb_pro_init(struct peak_usb_device *dev) PCAN_USBPRO_INFO_FW, &fi, sizeof(fi)); if (err) { + kfree(usb_if); dev_err(dev->netdev->dev.parent, "unable to read %s firmware info (err %d)\n", pcan_usb_pro.name, err); @@ -885,6 +886,7 @@ static int pcan_usb_pro_init(struct peak_usb_device *dev) PCAN_USBPRO_INFO_BL, &bi, sizeof(bi)); if (err) { + kfree(usb_if); dev_err(dev->netdev->dev.parent, "unable to read %s bootloader info (err %d)\n", pcan_usb_pro.name, err); -- cgit v1.2.3-18-g5258 From 348f0fc238efb441a28e7644c51f9fd3001b228a Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 16 Apr 2012 15:41:28 -0400 Subject: tracing: Fix regression with tracing_on The change to make tracing_on affect only the ftrace ring buffer, caused a bug where it wont affect any ring buffer. The problem was that the buffer of the trace_array was passed to the write function and not the trace array itself. The trace_array can change the buffer when running a latency tracer. If this happens, then the buffer being disabled may not be the buffer currently used by ftrace. This will cause the tracing_on file to become useless. The simple fix is to pass the trace_array to the write function instead of the buffer. Then the actual buffer may be changed. Signed-off-by: Steven Rostedt --- kernel/trace/trace.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index ed7b5d1e12f..2a22255c101 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -4629,7 +4629,8 @@ static ssize_t rb_simple_read(struct file *filp, char __user *ubuf, size_t cnt, loff_t *ppos) { - struct ring_buffer *buffer = filp->private_data; + struct trace_array *tr = filp->private_data; + struct ring_buffer *buffer = tr->buffer; char buf[64]; int r; @@ -4647,7 +4648,8 @@ static ssize_t rb_simple_write(struct file *filp, const char __user *ubuf, size_t cnt, loff_t *ppos) { - struct ring_buffer *buffer = filp->private_data; + struct trace_array *tr = filp->private_data; + struct ring_buffer *buffer = tr->buffer; unsigned long val; int ret; @@ -4734,7 +4736,7 @@ static __init int tracer_init_debugfs(void) &trace_clock_fops); trace_create_file("tracing_on", 0644, d_tracer, - global_trace.buffer, &rb_simple_fops); + &global_trace, &rb_simple_fops); #ifdef CONFIG_DYNAMIC_FTRACE trace_create_file("dyn_ftrace_total_info", 0444, d_tracer, -- cgit v1.2.3-18-g5258 From 089f9fba56faf33cc6dd2a6442b7ac92c58b8209 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 16 Apr 2012 22:48:15 +0200 Subject: i387: ptrace breaks the lazy-fpu-restore logic Starting from 7e16838d "i387: support lazy restore of FPU state" we assume that fpu_owner_task doesn't need restore_fpu_checking() on the context switch, its FPU state should match what we already have in the FPU on this CPU. However, debugger can change the tracee's FPU state, in this case we should reset fpu.last_cpu to ensure fpu_lazy_restore() can't return true. Change init_fpu() to do this, it is called by user_regset->set() methods. Reported-by: Jan Kratochvil Suggested-by: Linus Torvalds Signed-off-by: Oleg Nesterov Link: http://lkml.kernel.org/r/20120416204815.GB24884@redhat.com Cc: v3.3 Signed-off-by: H. Peter Anvin --- arch/x86/kernel/i387.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c index 7734bcbb5a3..2d6e6498c17 100644 --- a/arch/x86/kernel/i387.c +++ b/arch/x86/kernel/i387.c @@ -235,6 +235,7 @@ int init_fpu(struct task_struct *tsk) if (tsk_used_math(tsk)) { if (HAVE_HWFP && tsk == current) unlazy_fpu(tsk); + tsk->thread.fpu.last_cpu = ~0; return 0; } -- cgit v1.2.3-18-g5258 From 244b65dbfede788f2fa3fe2463c44d0809e97c6b Mon Sep 17 00:00:00 2001 From: David Ward Date: Sun, 15 Apr 2012 12:31:45 +0000 Subject: net_sched: gred: Fix oops in gred_dump() in WRED mode A parameter set exists for WRED mode, called wred_set, to hold the same values for qavg and qidlestart across all VQs. The WRED mode values had been previously held in the VQ for the default DP. After these values were moved to wred_set, the VQ for the default DP was no longer created automatically (so that it could be omitted on purpose, to have packets in the default DP enqueued directly to the device without using RED). However, gred_dump() was overlooked during that change; in WRED mode it still reads qavg/qidlestart from the VQ for the default DP, which might not even exist. As a result, this command sequence will cause an oops: tc qdisc add dev $DEV handle $HANDLE parent $PARENT gred setup \ DPs 3 default 2 grio tc qdisc change dev $DEV handle $HANDLE gred DP 0 prio 8 $RED_OPTIONS tc qdisc change dev $DEV handle $HANDLE gred DP 1 prio 8 $RED_OPTIONS This fixes gred_dump() in WRED mode to use the values held in wred_set. Signed-off-by: David Ward Signed-off-by: David S. Miller --- net/sched/sch_gred.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/net/sched/sch_gred.c b/net/sched/sch_gred.c index 0b15236be7b..8179494c269 100644 --- a/net/sched/sch_gred.c +++ b/net/sched/sch_gred.c @@ -565,11 +565,8 @@ static int gred_dump(struct Qdisc *sch, struct sk_buff *skb) opt.packets = q->packetsin; opt.bytesin = q->bytesin; - if (gred_wred_mode(table)) { - q->vars.qidlestart = - table->tab[table->def]->vars.qidlestart; - q->vars.qavg = table->tab[table->def]->vars.qavg; - } + if (gred_wred_mode(table)) + gred_load_wred_set(table, q); opt.qave = red_calc_qavg(&q->parms, &q->vars, q->vars.qavg); -- cgit v1.2.3-18-g5258 From 4362aaf6054b9760652c7047cdf6fa852acb6cf7 Mon Sep 17 00:00:00 2001 From: David Ward Date: Mon, 16 Apr 2012 03:17:22 +0000 Subject: net_sched: red: Make minor corrections to comments Signed-off-by: David Ward Signed-off-by: David S. Miller --- include/net/red.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/net/red.h b/include/net/red.h index 77d4c3745cb..ef46058d35b 100644 --- a/include/net/red.h +++ b/include/net/red.h @@ -245,7 +245,7 @@ static inline unsigned long red_calc_qavg_from_idle_time(const struct red_parms * * dummy packets as a burst after idle time, i.e. * - * p->qavg *= (1-W)^m + * v->qavg *= (1-W)^m * * This is an apparently overcomplicated solution (f.e. we have to * precompute a table to make this calculation in reasonable time) @@ -279,7 +279,7 @@ static inline unsigned long red_calc_qavg_no_idle_time(const struct red_parms *p unsigned int backlog) { /* - * NOTE: p->qavg is fixed point number with point at Wlog. + * NOTE: v->qavg is fixed point number with point at Wlog. * The formula below is equvalent to floating point * version: * @@ -390,7 +390,7 @@ static inline void red_adaptative_algo(struct red_parms *p, struct red_vars *v) if (red_is_idling(v)) qavg = red_calc_qavg_from_idle_time(p, v); - /* p->qavg is fixed point number with point at Wlog */ + /* v->qavg is fixed point number with point at Wlog */ qavg >>= p->Wlog; if (qavg > p->target_max && p->max_P <= MAX_P_MAX) -- cgit v1.2.3-18-g5258 From a99ff7d0123b19ecad3b589480b6542716ab6b52 Mon Sep 17 00:00:00 2001 From: Stephane Fillod Date: Sun, 15 Apr 2012 11:38:29 +0000 Subject: net: usb: smsc75xx: fix mtu Make smsc75xx recalculate the hard_mtu after adjusting the hard_header_len. Without this, usbnet adjusts the MTU down to 1492 bytes, and the host is unable to receive standard 1500-byte frames from the device. Inspired by same fix on cdc_eem 78fb72f7936c01d5b426c03a691eca082b03f2b9. Tested on ARM/Omap3 with EVB-LAN7500-LC. Signed-off-by: Stephane Fillod Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index 187d01ccb97..a2349483cd2 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -1051,6 +1051,7 @@ static int smsc75xx_bind(struct usbnet *dev, struct usb_interface *intf) dev->net->ethtool_ops = &smsc75xx_ethtool_ops; dev->net->flags |= IFF_MULTICAST; dev->net->hard_header_len += SMSC75XX_TX_OVERHEAD; + dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len; return 0; } -- cgit v1.2.3-18-g5258 From 890fdf2a0cb88202d1427589db2cf29c1bdd3c1d Mon Sep 17 00:00:00 2001 From: Hiroaki SHIMODA Date: Sun, 15 Apr 2012 13:26:01 +0000 Subject: dummy: Add ndo_uninit(). In register_netdevice(), when ndo_init() is successful and later some error occurred, ndo_uninit() will be called. So dummy deivce is desirable to implement ndo_uninit() method to free percpu stats for this case. And, ndo_uninit() is also called along with dev->destructor() when device is unregistered, so in order to prevent dev->dstats from being freed twice, dev->destructor is modified to free_netdev(). Signed-off-by: Hiroaki SHIMODA Signed-off-by: David S. Miller --- drivers/net/dummy.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/dummy.c b/drivers/net/dummy.c index d5c6d92f1ee..442d91a2747 100644 --- a/drivers/net/dummy.c +++ b/drivers/net/dummy.c @@ -107,14 +107,14 @@ static int dummy_dev_init(struct net_device *dev) return 0; } -static void dummy_dev_free(struct net_device *dev) +static void dummy_dev_uninit(struct net_device *dev) { free_percpu(dev->dstats); - free_netdev(dev); } static const struct net_device_ops dummy_netdev_ops = { .ndo_init = dummy_dev_init, + .ndo_uninit = dummy_dev_uninit, .ndo_start_xmit = dummy_xmit, .ndo_validate_addr = eth_validate_addr, .ndo_set_rx_mode = set_multicast_list, @@ -128,7 +128,7 @@ static void dummy_setup(struct net_device *dev) /* Initialize the device structure. */ dev->netdev_ops = &dummy_netdev_ops; - dev->destructor = dummy_dev_free; + dev->destructor = free_netdev; /* Fill in device structure with ethernet-generic values. */ dev->tx_queue_len = 0; -- cgit v1.2.3-18-g5258 From fc1a93bd9bad32581bca1e66fb7b3cabad9b3361 Mon Sep 17 00:00:00 2001 From: Adam Jackson Date: Mon, 9 Apr 2012 17:49:36 -0400 Subject: intel_ips: Hush the i915 symbols message We can't control order here, and getting it inverted is harmless. So turn this down to dev_info() and leave a note about how to fix it in case userspace is insufficiently automagic. Bugzilla: https://bugzilla.redhat.com/794953 Signed-off-by: Adam Jackson Signed-off-by: Matthew Garrett --- drivers/platform/x86/intel_ips.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/intel_ips.c b/drivers/platform/x86/intel_ips.c index f7ba316e0ed..0ffdb3cde2b 100644 --- a/drivers/platform/x86/intel_ips.c +++ b/drivers/platform/x86/intel_ips.c @@ -1565,7 +1565,7 @@ static int ips_probe(struct pci_dev *dev, const struct pci_device_id *id) ips->poll_turbo_status = true; if (!ips_get_i915_syms(ips)) { - dev_err(&dev->dev, "failed to get i915 symbols, graphics turbo disabled\n"); + dev_info(&dev->dev, "failed to get i915 symbols, graphics turbo disabled until i915 loads\n"); ips->gpu_turbo_enabled = false; } else { dev_dbg(&dev->dev, "graphics turbo enabled\n"); -- cgit v1.2.3-18-g5258 From d62d421b071b08249361044d8e56c8b5c3ed6aa7 Mon Sep 17 00:00:00 2001 From: Martin Nyhus Date: Thu, 15 Mar 2012 18:25:48 +0100 Subject: dell-laptop: Terminate quirks list properly Add missing DMI_NONE entry to end of the quirks list so dmi_check_system() won't read past the end of the list. Signed-off-by: Martin Nyhus Signed-off-by: Matthew Garrett --- drivers/platform/x86/dell-laptop.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index a05fc9c955d..e6c08ee8d46 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -212,6 +212,7 @@ static struct dmi_system_id __devinitdata dell_quirks[] = { }, .driver_data = &quirk_dell_vostro_v130, }, + { } }; static struct calling_interface_buffer *buffer; -- cgit v1.2.3-18-g5258 From e7c72d888dac2c81003401d663bd8abd68e7c5cd Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Tue, 17 Apr 2012 14:13:45 +0300 Subject: perf tools: Add 'G' and 'H' modifiers to event parsing They were dropped during conversion of event parser. Add test case to make sure this will not happen again. Signed-off-by: Gleb Natapov Acked-by: Jiri Olsa Cc: Avi Kivity Cc: Ingo Molnar Cc: Peter Zijlstra Cc: Jiri Olsa Link: http://lkml.kernel.org/r/20120417111345.GK11918@redhat.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-test.c | 30 ++++++++++++++++++++++++++++++ tools/perf/util/parse-events.l | 2 +- 2 files changed, 31 insertions(+), 1 deletion(-) diff --git a/tools/perf/builtin-test.c b/tools/perf/builtin-test.c index 1c5b9801ac6..223ffdcc0fd 100644 --- a/tools/perf/builtin-test.c +++ b/tools/perf/builtin-test.c @@ -851,6 +851,28 @@ static int test__checkevent_symbolic_name_modifier(struct perf_evlist *evlist) return test__checkevent_symbolic_name(evlist); } +static int test__checkevent_exclude_host_modifier(struct perf_evlist *evlist) +{ + struct perf_evsel *evsel = list_entry(evlist->entries.next, + struct perf_evsel, node); + + TEST_ASSERT_VAL("wrong exclude guest", !evsel->attr.exclude_guest); + TEST_ASSERT_VAL("wrong exclude host", evsel->attr.exclude_host); + + return test__checkevent_symbolic_name(evlist); +} + +static int test__checkevent_exclude_guest_modifier(struct perf_evlist *evlist) +{ + struct perf_evsel *evsel = list_entry(evlist->entries.next, + struct perf_evsel, node); + + TEST_ASSERT_VAL("wrong exclude guest", evsel->attr.exclude_guest); + TEST_ASSERT_VAL("wrong exclude host", !evsel->attr.exclude_host); + + return test__checkevent_symbolic_name(evlist); +} + static int test__checkevent_symbolic_alias_modifier(struct perf_evlist *evlist) { struct perf_evsel *evsel = list_entry(evlist->entries.next, @@ -1091,6 +1113,14 @@ static struct test__event_st { .name = "r1,syscalls:sys_enter_open:k,1:1:hp", .check = test__checkevent_list, }, + { + .name = "instructions:G", + .check = test__checkevent_exclude_host_modifier, + }, + { + .name = "instructions:H", + .check = test__checkevent_exclude_guest_modifier, + }, }; #define TEST__EVENTS_CNT (sizeof(test__events) / sizeof(struct test__event_st)) diff --git a/tools/perf/util/parse-events.l b/tools/perf/util/parse-events.l index 05d766e3ecb..1fcf1bbc545 100644 --- a/tools/perf/util/parse-events.l +++ b/tools/perf/util/parse-events.l @@ -54,7 +54,7 @@ num_dec [0-9]+ num_hex 0x[a-fA-F0-9]+ num_raw_hex [a-fA-F0-9]+ name [a-zA-Z_*?][a-zA-Z0-9_*?]* -modifier_event [ukhp]{1,5} +modifier_event [ukhpGH]{1,8} modifier_bp [rwx] %% -- cgit v1.2.3-18-g5258 From 92c38702e98e58438c3760ebb279c40bbca8bd5f Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Mon, 16 Apr 2012 12:12:09 -0700 Subject: rcu: Permit call_rcu() from CPU_DYING notifiers As of: 29494be71afe ("rcu,cleanup: simplify the code when cpu is dying") RCU adopts callbacks from the dying CPU in its CPU_DYING notifier, which means that any callbacks posted by later CPU_DYING notifiers are ignored until the CPU comes back online. A WARN_ON_ONCE() was added to __call_rcu() by: e56014000816 ("rcu: Simplify offline processing") to check for this condition. Although this condition did not trigger (at least as far as I know) during -next testing, it did recently trigger in mainline: https://lkml.org/lkml/2012/4/2/34 What is needed longer term is for RCU's CPU_DEAD notifier to adopt any callbacks that were posted by CPU_DYING notifiers, however, the Linux kernel has been running with this sort of thing happening for quite some time. So the only thing that qualifies as a regression is the WARN_ON_ONCE(), which this commit removes. Making RCU's CPU_DEAD notifier adopt callbacks posted by CPU_DYING notifiers is a topic for the 3.5 release of the Linux kernel. Reported-by: Sergey Senozhatsky Signed-off-by: Paul E. McKenney Signed-off-by: Paul E. McKenney --- kernel/rcutree.c | 1 - 1 file changed, 1 deletion(-) diff --git a/kernel/rcutree.c b/kernel/rcutree.c index 1050d6d3922..d0c5baf1ab1 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -1820,7 +1820,6 @@ __call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu), * a quiescent state betweentimes. */ local_irq_save(flags); - WARN_ON_ONCE(cpu_is_offline(smp_processor_id())); rdp = this_cpu_ptr(rsp->rda); /* Add the callback to our list. */ -- cgit v1.2.3-18-g5258 From 973ef21a676e55a8e1a100a6e109f0c116ea75e8 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 16 Apr 2012 14:56:48 +0200 Subject: mac80211: fix truncated packets in cooked monitor rx Cooked monitor rx was recently changed to use ieee80211_add_rx_radiotap_header instead of generating only limited radiotap information. ieee80211_add_rx_radiotap_header assumes that FCS info is still present if the hardware supports receiving it, however when cooked monitor rx packets are processed, FCS info has already been stripped. Fix this by adding an extra flag indicating FCS presence. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- net/mac80211/rx.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index bcfe8c77c83..d64e285400a 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -103,7 +103,7 @@ static void ieee80211_add_rx_radiotap_header(struct ieee80211_local *local, struct sk_buff *skb, struct ieee80211_rate *rate, - int rtap_len) + int rtap_len, bool has_fcs) { struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); struct ieee80211_radiotap_header *rthdr; @@ -134,7 +134,7 @@ ieee80211_add_rx_radiotap_header(struct ieee80211_local *local, } /* IEEE80211_RADIOTAP_FLAGS */ - if (local->hw.flags & IEEE80211_HW_RX_INCLUDES_FCS) + if (has_fcs && (local->hw.flags & IEEE80211_HW_RX_INCLUDES_FCS)) *pos |= IEEE80211_RADIOTAP_F_FCS; if (status->flag & (RX_FLAG_FAILED_FCS_CRC | RX_FLAG_FAILED_PLCP_CRC)) *pos |= IEEE80211_RADIOTAP_F_BADFCS; @@ -294,7 +294,8 @@ ieee80211_rx_monitor(struct ieee80211_local *local, struct sk_buff *origskb, } /* prepend radiotap information */ - ieee80211_add_rx_radiotap_header(local, skb, rate, needed_headroom); + ieee80211_add_rx_radiotap_header(local, skb, rate, needed_headroom, + true); skb_reset_mac_header(skb); skb->ip_summed = CHECKSUM_UNNECESSARY; @@ -2571,7 +2572,8 @@ static void ieee80211_rx_cooked_monitor(struct ieee80211_rx_data *rx, goto out_free_skb; /* prepend radiotap information */ - ieee80211_add_rx_radiotap_header(local, skb, rate, needed_headroom); + ieee80211_add_rx_radiotap_header(local, skb, rate, needed_headroom, + false); skb_set_mac_header(skb, 0); skb->ip_summed = CHECKSUM_UNNECESSARY; -- cgit v1.2.3-18-g5258 From 15fae50a9bd28a9fe490b053ff4353f8a38ea5a0 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Mon, 16 Apr 2012 12:03:35 -0700 Subject: MAINTAINERS: Add maintainer for iwlwifi Add Johannes Berg as the primary maintainer for iwlwifi driver Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 6010b9d13b4..f6dfba3d96a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3592,6 +3592,7 @@ S: Supported F: drivers/net/wireless/iwlegacy/ INTEL WIRELESS WIFI LINK (iwlwifi) +M: Johannes Berg M: Wey-Yi Guy M: Intel Linux Wireless L: linux-wireless@vger.kernel.org -- cgit v1.2.3-18-g5258 From 6741e7f048dacc92e37c5d724ff5c64e45f6c2c9 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 16 Apr 2012 22:10:42 +0200 Subject: mac80211: fix logic error in ibss channel type check The broken check leads to rate control attempting to use HT40 while the driver is configured for HT20. This leads to interesting hardware issues. HT40 can only be used if the channel type is either HT40- or HT40+ and if the channel type of the cell matches the local type. Signed-off-by: Felix Fietkau Cc: stable@vger.kernel.org Signed-off-by: John W. Linville --- net/mac80211/ibss.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 33fd8d9f714..cef7c29214a 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -457,8 +457,8 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, * fall back to HT20 if we don't use or use * the other extension channel */ - if ((channel_type == NL80211_CHAN_HT40MINUS || - channel_type == NL80211_CHAN_HT40PLUS) && + if (!(channel_type == NL80211_CHAN_HT40MINUS || + channel_type == NL80211_CHAN_HT40PLUS) || channel_type != sdata->u.ibss.channel_type) sta_ht_cap_new.cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; -- cgit v1.2.3-18-g5258 From fd09c85fe15aa66a69f091ba178817d5ef82476d Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Tue, 17 Apr 2012 08:34:50 +0530 Subject: ath9k: Fix TX fragmentation Assigning sequence number for frames without taking care of the fragment field breaks transmission of fragmented frames. Fix this by assigning the fragment number properly. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/xmit.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 834e6bc45e8..23eaa1b26eb 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1820,6 +1820,7 @@ static struct ath_buf *ath_tx_setup_buffer(struct ath_softc *sc, struct ath_frame_info *fi = get_frame_info(skb); struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; struct ath_buf *bf; + int fragno; u16 seqno; bf = ath_tx_get_buffer(sc); @@ -1831,9 +1832,16 @@ static struct ath_buf *ath_tx_setup_buffer(struct ath_softc *sc, ATH_TXBUF_RESET(bf); if (tid) { + fragno = le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG; seqno = tid->seq_next; hdr->seq_ctrl = cpu_to_le16(tid->seq_next << IEEE80211_SEQ_SEQ_SHIFT); - INCR(tid->seq_next, IEEE80211_SEQ_MAX); + + if (fragno) + hdr->seq_ctrl |= cpu_to_le16(fragno); + + if (!ieee80211_has_morefrags(hdr->frame_control)) + INCR(tid->seq_next, IEEE80211_SEQ_MAX); + bf->bf_state.seqno = seqno; } -- cgit v1.2.3-18-g5258 From a7dbb603423d499acacefb5fad65d2b406f16370 Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Tue, 17 Apr 2012 18:00:11 +0100 Subject: ASoC: core: Fix card RTD count for deferred probe. Currently we increment the number of RTD's per card during the DAI link bind. This can cause an incorrect RTD count when we cannot find a component and defer the probe (and hence perform the DAI link bind for the card again). Fix the count so that it is cleared before every card registration and bind attempt. Signed-off-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/soc-core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 8d2ebf502df..3a4e93e52b6 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -3119,6 +3119,7 @@ int snd_soc_register_card(struct snd_soc_card *card) GFP_KERNEL); if (card->rtd == NULL) return -ENOMEM; + card->num_rtd = 0; card->rtd_aux = &card->rtd[card->num_links]; for (i = 0; i < card->num_links; i++) -- cgit v1.2.3-18-g5258 From 34948a947d1a576c10afee6d14792fd237549577 Mon Sep 17 00:00:00 2001 From: Benjamin Poirier Date: Fri, 6 Apr 2012 07:20:21 +0000 Subject: ixgbe: add missing rtnl_lock in PM resume path Upon resume from standby, ixgbe may trigger the ASSERT_RTNL() in netif_set_real_num_tx_queues(). The call stack is: netif_set_real_num_tx_queues ixgbe_set_num_queues ixgbe_init_interrupt_scheme ixgbe_resume Signed-off-by: Benjamin Poirier Tested-by: Stephen Ko Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index dac7c01f833..9e2be8c45c2 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -4836,7 +4836,9 @@ static int ixgbe_resume(struct pci_dev *pdev) pci_wake_from_d3(pdev, false); + rtnl_lock(); err = ixgbe_init_interrupt_scheme(adapter); + rtnl_unlock(); if (err) { e_dev_err("Cannot initialize interrupts for device\n"); return err; -- cgit v1.2.3-18-g5258 From b2db497eb25510052fc2d3152384f964b3312004 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Sat, 7 Apr 2012 04:57:29 +0000 Subject: ixgbe: Identify FCoE rings earlier to resolve memory corruption w/ FCoE This patch makes it so that we identify FCoE rings earlier than ixgbe_set_rx_buffer_len. Instead we identify the Rx FCoE rings at allocation time in ixgbe_alloc_q_vector. The motivation behind this change is to avoid memory corruption when FCoE is enabled. Without this change we were initializing the rings at 0, and 2K on systems with 4K pages, then when we bumped the buffer size to 4K with order 1 pages we were accessing offsets 2K and 6K instead of 0 and 4K. This was resulting in memory corruptions. Signed-off-by: Alexander Duyck Acked-by: Yi Zou Tested-by: Ross Brattain Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c | 10 ++++++++++ drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 8 -------- 2 files changed, 10 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c index 027d7a75be3..ed1b47dc083 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c @@ -622,6 +622,16 @@ static int ixgbe_alloc_q_vector(struct ixgbe_adapter *adapter, int v_idx, if (adapter->hw.mac.type == ixgbe_mac_82599EB) set_bit(__IXGBE_RX_CSUM_UDP_ZERO_ERR, &ring->state); +#ifdef IXGBE_FCOE + if (adapter->netdev->features & NETIF_F_FCOE_MTU) { + struct ixgbe_ring_feature *f; + f = &adapter->ring_feature[RING_F_FCOE]; + if ((rxr_idx >= f->mask) && + (rxr_idx < f->mask + f->indices)) + set_bit(__IXGBE_RX_FCOE_BUFSZ, &ring->state); + } + +#endif /* IXGBE_FCOE */ /* apply Rx specific ring traits */ ring->count = adapter->rx_ring_count; ring->queue_index = rxr_idx; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 9e2be8c45c2..a7f3cd872ca 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -3154,14 +3154,6 @@ static void ixgbe_set_rx_buffer_len(struct ixgbe_adapter *adapter) set_ring_rsc_enabled(rx_ring); else clear_ring_rsc_enabled(rx_ring); -#ifdef IXGBE_FCOE - if (netdev->features & NETIF_F_FCOE_MTU) { - struct ixgbe_ring_feature *f; - f = &adapter->ring_feature[RING_F_FCOE]; - if ((i >= f->mask) && (i < f->mask + f->indices)) - set_bit(__IXGBE_RX_FCOE_BUFSZ, &rx_ring->state); - } -#endif /* IXGBE_FCOE */ } } -- cgit v1.2.3-18-g5258 From eb798c641a34ae9cee9fcacfbe5dd40bd7777607 Mon Sep 17 00:00:00 2001 From: Vinit Shenoy Date: Tue, 17 Apr 2012 12:40:13 +0530 Subject: spi/pl022: Fix range checking for bits per word pl022 ssp controller supports word lengths from 4 to 16 (or 32) bits. Currently implemented checks were incorrect. It has following check if (pl022->vendor->max_bpw >= 32) which must be checking for <=. Also error print message is incorrect, that prints "range is from 1 to 16". Fix both these issues. Signed-off-by: Vinit Shenoy Acked-by: Linus Walleij Signed-off-by: Grant Likely --- drivers/spi/spi-pl022.c | 25 +++++++++---------------- 1 file changed, 9 insertions(+), 16 deletions(-) diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index 09c925aaf32..1ead49dbebc 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -1823,9 +1823,12 @@ static int pl022_setup(struct spi_device *spi) } else chip->cs_control = chip_info->cs_control; - if (bits <= 3) { - /* PL022 doesn't support less than 4-bits */ + /* Check bits per word with vendor specific range */ + if ((bits <= 3) || (bits > pl022->vendor->max_bpw)) { status = -ENOTSUPP; + dev_err(&spi->dev, "illegal data size for this controller!\n"); + dev_err(&spi->dev, "This controller can only handle 4 <= n <= %d bit words\n", + pl022->vendor->max_bpw); goto err_config_params; } else if (bits <= 8) { dev_dbg(&spi->dev, "4 <= n <=8 bits per word\n"); @@ -1838,20 +1841,10 @@ static int pl022_setup(struct spi_device *spi) chip->read = READING_U16; chip->write = WRITING_U16; } else { - if (pl022->vendor->max_bpw >= 32) { - dev_dbg(&spi->dev, "17 <= n <= 32 bits per word\n"); - chip->n_bytes = 4; - chip->read = READING_U32; - chip->write = WRITING_U32; - } else { - dev_err(&spi->dev, - "illegal data size for this controller!\n"); - dev_err(&spi->dev, - "a standard pl022 can only handle " - "1 <= n <= 16 bit words\n"); - status = -ENOTSUPP; - goto err_config_params; - } + dev_dbg(&spi->dev, "17 <= n <= 32 bits per word\n"); + chip->n_bytes = 4; + chip->read = READING_U32; + chip->write = WRITING_U32; } /* Now Initialize all register settings required for this chip */ -- cgit v1.2.3-18-g5258 From b95465c8fcd7c8619ff9ff7bbf8038ab31c7f34b Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Mon, 16 Apr 2012 02:02:48 +0000 Subject: arcnet: rimi: Fix device name in debug output arcrimi_probe() calls BUGMSG() before register_netdev() happens. BUGMSG() itself prints dev->name, but as the format string hasn't been expanded by register_netdev() yet, the output contains bogus device name such as arc%d: Given: node 00h, shmem 0h, irq 0 As we don't know the device name yet, just drop the prefix completely from the debugging messages. Reported-by: Steven Young Signed-off-by: Jiri Kosina Signed-off-by: David S. Miller --- drivers/net/arcnet/arc-rimi.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/arcnet/arc-rimi.c b/drivers/net/arcnet/arc-rimi.c index 25197b698dd..b8b4c7ba884 100644 --- a/drivers/net/arcnet/arc-rimi.c +++ b/drivers/net/arcnet/arc-rimi.c @@ -89,16 +89,16 @@ static int __init arcrimi_probe(struct net_device *dev) BUGLVL(D_NORMAL) printk(VERSION); BUGLVL(D_NORMAL) printk("E-mail me if you actually test the RIM I driver, please!\n"); - BUGMSG(D_NORMAL, "Given: node %02Xh, shmem %lXh, irq %d\n", + BUGLVL(D_NORMAL) printk("Given: node %02Xh, shmem %lXh, irq %d\n", dev->dev_addr[0], dev->mem_start, dev->irq); if (dev->mem_start <= 0 || dev->irq <= 0) { - BUGMSG(D_NORMAL, "No autoprobe for RIM I; you " + BUGLVL(D_NORMAL) printk("No autoprobe for RIM I; you " "must specify the shmem and irq!\n"); return -ENODEV; } if (dev->dev_addr[0] == 0) { - BUGMSG(D_NORMAL, "You need to specify your card's station " + BUGLVL(D_NORMAL) printk("You need to specify your card's station " "ID!\n"); return -ENODEV; } @@ -109,7 +109,7 @@ static int __init arcrimi_probe(struct net_device *dev) * will be taken. */ if (!request_mem_region(dev->mem_start, MIRROR_SIZE, "arcnet (90xx)")) { - BUGMSG(D_NORMAL, "Card memory already allocated\n"); + BUGLVL(D_NORMAL) printk("Card memory already allocated\n"); return -ENODEV; } return arcrimi_found(dev); -- cgit v1.2.3-18-g5258 From edfb5d4687d587c9f714799c7ee27517118e12e6 Mon Sep 17 00:00:00 2001 From: Jiri Bohac Date: Mon, 16 Apr 2012 03:34:39 +0000 Subject: ipv6: fix rt6_update_expires Commit 1716a961 (ipv6: fix problem with expired dst cache) broke PMTU discovery. rt6_update_expires() calls dst_set_expires(), which only updates dst->expires if it has not been set previously (expires == 0) or if the new expires is earlier than the current dst->expires. rt6_update_expires() needs to zero rt->dst.expires, otherwise it will contain ivalid data left over from rt->dst.from and will confuse dst_set_expires(). Signed-off-by: Jiri Bohac Signed-off-by: David S. Miller --- include/net/ip6_fib.h | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h index c64778fd5e1..cb8da1dac51 100644 --- a/include/net/ip6_fib.h +++ b/include/net/ip6_fib.h @@ -143,8 +143,14 @@ static inline void rt6_set_expires(struct rt6_info *rt, unsigned long expires) static inline void rt6_update_expires(struct rt6_info *rt, int timeout) { - if (!(rt->rt6i_flags & RTF_EXPIRES) && rt->dst.from) - dst_release(rt->dst.from); + if (!(rt->rt6i_flags & RTF_EXPIRES)) { + if (rt->dst.from) + dst_release(rt->dst.from); + /* dst_set_expires relies on expires == 0 + * if it has not been set previously. + */ + rt->dst.expires = 0; + } dst_set_expires(&rt->dst, timeout); rt->rt6i_flags |= RTF_EXPIRES; -- cgit v1.2.3-18-g5258 From cda31e10baf47a8a7d9360d9488fb76294be1ca3 Mon Sep 17 00:00:00 2001 From: Jiri Bohac Date: Mon, 16 Apr 2012 03:35:41 +0000 Subject: ipv6: clean up rt6_clean_expires Functionally, this change is a NOP. Semantically, rt6_clean_expires() wants to do rt->dst.from = NULL instead of rt->dst.expires = 0. It is clearing the RTF_EXPIRES flag, so the union is going to be treated as a pointer (dst.from) not a long (dst.expires). Signed-off-by: Jiri Bohac Signed-off-by: David S. Miller --- include/net/ip6_fib.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h index cb8da1dac51..0ae759a6c76 100644 --- a/include/net/ip6_fib.h +++ b/include/net/ip6_fib.h @@ -129,7 +129,7 @@ static inline void rt6_clean_expires(struct rt6_info *rt) dst_release(rt->dst.from); rt->rt6i_flags &= ~RTF_EXPIRES; - rt->dst.expires = 0; + rt->dst.from = NULL; } static inline void rt6_set_expires(struct rt6_info *rt, unsigned long expires) -- cgit v1.2.3-18-g5258 From 5b76d0600b2b08eef77f8e9226938b7b6bde3099 Mon Sep 17 00:00:00 2001 From: Christian Riesch Date: Mon, 16 Apr 2012 04:35:25 +0000 Subject: davinci_mdio: Fix MDIO timeout check Under heavy load (flood ping) it is possible for the MDIO timeout to expire before the loop checks the GO bit again. This patch adds an additional check whether the operation was done before actually returning -ETIMEDOUT. To reproduce this bug, flood ping the device, e.g., ping -f -l 1000 After some time, a "timed out waiting for user access" warning may appear. And even worse, link may go down since the PHY reported a timeout. Signed-off-by: Christian Riesch Cc: Cc: Cyril Chemparathy Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/davinci_mdio.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c index 2757c7d6e63..e4e47088e26 100644 --- a/drivers/net/ethernet/ti/davinci_mdio.c +++ b/drivers/net/ethernet/ti/davinci_mdio.c @@ -181,6 +181,11 @@ static inline int wait_for_user_access(struct davinci_mdio_data *data) __davinci_mdio_reset(data); return -EAGAIN; } + + reg = __raw_readl(®s->user[0].access); + if ((reg & USERACCESS_GO) == 0) + return 0; + dev_err(data->dev, "timed out waiting for user access\n"); return -ETIMEDOUT; } -- cgit v1.2.3-18-g5258 From 48159f009f5f92ef5962e7c278ac615d74242fa5 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 16 Apr 2012 05:22:12 +0000 Subject: drivers/net/wan/farsync.c: add missing iounmap Free card->mem in the error-handling code since it was successfully allocated just above. Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- drivers/net/wan/farsync.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c index ebb9f24eefb..1a623183cbe 100644 --- a/drivers/net/wan/farsync.c +++ b/drivers/net/wan/farsync.c @@ -2483,6 +2483,7 @@ fst_add_one(struct pci_dev *pdev, const struct pci_device_id *ent) pr_err("Control memory remap failed\n"); pci_release_regions(pdev); pci_disable_device(pdev); + iounmap(card->mem); kfree(card); return -ENODEV; } -- cgit v1.2.3-18-g5258 From 4d846f02392a710f9604892ac3329e628e60a230 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 16 Apr 2012 23:28:07 +0000 Subject: tcp: fix tcp_grow_window() for large incoming frames tcp_grow_window() has to grow rcv_ssthresh up to window_clamp, allowing sender to increase its window. tcp_grow_window() still assumes a tcp frame is under MSS, but its no longer true with LRO/GRO. This patch fixes one of the performance issue we noticed with GRO on. Signed-off-by: Eric Dumazet Cc: Neal Cardwell Cc: Tom Herbert Acked-by: Neal Cardwell Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 9944c1d9a21..3ff36406537 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -335,6 +335,7 @@ static void tcp_grow_window(struct sock *sk, const struct sk_buff *skb) incr = __tcp_grow_window(sk, skb); if (incr) { + incr = max_t(int, incr, 2 * skb->len); tp->rcv_ssthresh = min(tp->rcv_ssthresh + incr, tp->window_clamp); inet_csk(sk)->icsk_ack.quick |= 1; -- cgit v1.2.3-18-g5258 From d3d4f0a025e621b82da08a76df4036d4267739dd Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 17 Apr 2012 14:03:53 +0000 Subject: net/sock.h: fix sk_peek_off kernel-doc warning Fix kernel-doc warning in net/sock.h: Warning(include/net/sock.h:377): No description found for parameter 'sk_peek_off' Signed-off-by: Randy Dunlap Signed-off-by: David S. Miller --- include/net/sock.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/net/sock.h b/include/net/sock.h index a6ba1f8871f..188532ee88b 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -246,6 +246,7 @@ struct cg_proto; * @sk_user_data: RPC layer private data * @sk_sndmsg_page: cached page for sendmsg * @sk_sndmsg_off: cached offset for sendmsg + * @sk_peek_off: current peek_offset value * @sk_send_head: front of stuff to transmit * @sk_security: used by security modules * @sk_mark: generic packet mark -- cgit v1.2.3-18-g5258 From b922934d017f1cc831b017913ed7d1a56c558b43 Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Mon, 16 Apr 2012 04:43:15 +0000 Subject: netns: do not leak net_generic data on failed init ops_init should free the net_generic data on init failure and __register_pernet_operations should not call ops_free when NET_NS is not enabled. Signed-off-by: Julian Anastasov Reviewed-by: "Eric W. Biederman" Signed-off-by: David S. Miller --- net/core/net_namespace.c | 33 ++++++++++++++++++--------------- 1 file changed, 18 insertions(+), 15 deletions(-) diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c index 0e950fda9a0..31a5ae51a45 100644 --- a/net/core/net_namespace.c +++ b/net/core/net_namespace.c @@ -83,21 +83,29 @@ assign: static int ops_init(const struct pernet_operations *ops, struct net *net) { - int err; + int err = -ENOMEM; + void *data = NULL; + if (ops->id && ops->size) { - void *data = kzalloc(ops->size, GFP_KERNEL); + data = kzalloc(ops->size, GFP_KERNEL); if (!data) - return -ENOMEM; + goto out; err = net_assign_generic(net, *ops->id, data); - if (err) { - kfree(data); - return err; - } + if (err) + goto cleanup; } + err = 0; if (ops->init) - return ops->init(net); - return 0; + err = ops->init(net); + if (!err) + return 0; + +cleanup: + kfree(data); + +out: + return err; } static void ops_free(const struct pernet_operations *ops, struct net *net) @@ -448,12 +456,7 @@ static void __unregister_pernet_operations(struct pernet_operations *ops) static int __register_pernet_operations(struct list_head *list, struct pernet_operations *ops) { - int err = 0; - err = ops_init(ops, &init_net); - if (err) - ops_free(ops, &init_net); - return err; - + return ops_init(ops, &init_net); } static void __unregister_pernet_operations(struct pernet_operations *ops) -- cgit v1.2.3-18-g5258 From cdf27f373781d8740b874b0b5c18142df32ebb52 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 17 Apr 2012 19:13:04 -0700 Subject: ASoC: fsi: update for dmaengine prep_slave_sg fallout. Leading up to the ->device_prep_slave_sg change in 185ecb5f4fd43911c35956d4cc7d94a1da30417f 'dmaengine: add context parameter to prep_slave_sg and prep_dma_cyclic' a generic wrapper was added in place to guard against the API change, though the fsi driver wasn't updated in the process (presumably its dmaengine support hadn't been merged yet at the time). This trivially switches over to the new wrapper and gets it building again. Signed-off-by: Paul Mundt Acked-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/sh/fsi.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c index 378cc5b056d..74ed2dffbff 100644 --- a/sound/soc/sh/fsi.c +++ b/sound/soc/sh/fsi.c @@ -1001,11 +1001,10 @@ static void fsi_dma_do_tasklet(unsigned long data) sg_dma_address(&sg) = buf; sg_dma_len(&sg) = len; - desc = chan->device->device_prep_slave_sg(chan, &sg, 1, dir, - DMA_PREP_INTERRUPT | - DMA_CTRL_ACK); + desc = dmaengine_prep_slave_sg(chan, &sg, 1, dir, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { - dev_err(dai->dev, "device_prep_slave_sg() fail\n"); + dev_err(dai->dev, "dmaengine_prep_slave_sg() fail\n"); return; } -- cgit v1.2.3-18-g5258 From fc87e080e19fdeb1120ce274423fea7b2ec2f63e Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 18 Apr 2012 13:49:20 +0300 Subject: usb: musb: drop __deprecated flag Looks like we cannot live without that double_buffer_not_ok flag due to many HW bugs this MUSB core has. So, let's drop the __deprecated flag to avoid annoying compile warnings. Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_core.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 93de517a32a..f4a40f001c8 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -449,7 +449,7 @@ struct musb { * We added this flag to forcefully disable double * buffering until we get it working. */ - unsigned double_buffer_not_ok:1 __deprecated; + unsigned double_buffer_not_ok:1; struct musb_hdrc_config *config; -- cgit v1.2.3-18-g5258 From c67dd31c5cc745e72d033c0e7d4a2da67c90cd88 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 16 Apr 2012 17:03:10 +0200 Subject: usb: musb: davinci.c: add missing unregister usb_nop_xceiv_unregister is needed on failure of usb_get_transceiver, as done in other error-handling code in the same function. Signed-off-by: Julia Lawall Signed-off-by: Felipe Balbi --- drivers/usb/musb/davinci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 97ab975fa44..768b4b55c81 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -386,7 +386,7 @@ static int davinci_musb_init(struct musb *musb) usb_nop_xceiv_register(); musb->xceiv = usb_get_transceiver(); if (!musb->xceiv) - return -ENODEV; + goto unregister; musb->mregs += DAVINCI_BASE_OFFSET; @@ -444,6 +444,7 @@ static int davinci_musb_init(struct musb *musb) fail: usb_put_transceiver(musb->xceiv); +unregister: usb_nop_xceiv_unregister(); return -ENODEV; } -- cgit v1.2.3-18-g5258 From b435092f70ec5ebbfb6d075d5bf3c631b49a51de Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 18 Apr 2012 12:08:23 +0200 Subject: tick: Fix oneshot broadcast setup really Sven Joachim reported, that suspend/resume on rc3 trips over a NULL pointer dereference. Linus spotted the clockevent handler being NULL. commit fa4da365b(clockevents: tTack broadcast device mode change in tick_broadcast_switch_to_oneshot()) tried to fix a problem with the broadcast device setup, which was introduced in commit 77b0d60c5( clockevents: Leave the broadcast device in shutdown mode when not needed). The initial commit avoided to set up the broadcast device when no broadcast request bits were set, but that left the broadcast device disfunctional. In consequence deep idle states which need the broadcast device were not woken up. commit fa4da365b tried to fix that by initializing the state of the broadcast facility, but that missed the fact, that nothing initializes the event handler and some other state of the underlying clock event device. The fix is to revert both commits and make only the mode setting of the clock event device conditional on the state of active broadcast users. That initializes everything except the low level device mode, but this happens when the broadcast functionality is invoked by deep idle. Reported-and-tested-by: Sven Joachim Signed-off-by: Thomas Gleixner Cc: Rafael J. Wysocki Cc: Linus Torvalds Cc: Suresh Siddha Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1204181205540.2542@ionos --- kernel/time/tick-broadcast.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index bf57abdc7bd..119aca5c684 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -531,7 +531,6 @@ void tick_broadcast_setup_oneshot(struct clock_event_device *bc) int was_periodic = bc->mode == CLOCK_EVT_MODE_PERIODIC; bc->event_handler = tick_handle_oneshot_broadcast; - clockevents_set_mode(bc, CLOCK_EVT_MODE_ONESHOT); /* Take the do_timer update */ tick_do_timer_cpu = cpu; @@ -549,6 +548,7 @@ void tick_broadcast_setup_oneshot(struct clock_event_device *bc) to_cpumask(tmpmask)); if (was_periodic && !cpumask_empty(to_cpumask(tmpmask))) { + clockevents_set_mode(bc, CLOCK_EVT_MODE_ONESHOT); tick_broadcast_init_next_event(to_cpumask(tmpmask), tick_next_period); tick_broadcast_set_event(tick_next_period, 1); @@ -577,15 +577,10 @@ void tick_broadcast_switch_to_oneshot(void) raw_spin_lock_irqsave(&tick_broadcast_lock, flags); tick_broadcast_device.mode = TICKDEV_MODE_ONESHOT; - - if (cpumask_empty(tick_get_broadcast_mask())) - goto end; - bc = tick_broadcast_device.evtdev; if (bc) tick_broadcast_setup_oneshot(bc); -end: raw_spin_unlock_irqrestore(&tick_broadcast_lock, flags); } -- cgit v1.2.3-18-g5258 From adae0fe0ea87e8fb1a72dde304937c60759b495f Mon Sep 17 00:00:00 2001 From: Stanislav Kinsbursky Date: Thu, 5 Apr 2012 21:04:37 +0400 Subject: SUNRPC: register PipeFS file system after pernet sybsystem PipeFS superblock creation routine relays on SUNRPC pernet data presense, which is created on register_pernet_subsys() call in SUNRPC module init function. Registering of PipeFS filesystem prior to registering of per-net subsystem leads to races (mount of PipeFS can dereference uninitialized data). Signed-off-by: Stanislav Kinsbursky Signed-off-by: Trond Myklebust --- net/sunrpc/sunrpc_syms.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/net/sunrpc/sunrpc_syms.c b/net/sunrpc/sunrpc_syms.c index 8adfc88e793..3d6498af9ad 100644 --- a/net/sunrpc/sunrpc_syms.c +++ b/net/sunrpc/sunrpc_syms.c @@ -75,19 +75,20 @@ static struct pernet_operations sunrpc_net_ops = { static int __init init_sunrpc(void) { - int err = register_rpc_pipefs(); + int err = rpc_init_mempool(); if (err) goto out; - err = rpc_init_mempool(); - if (err) - goto out2; err = rpcauth_init_module(); if (err) - goto out3; + goto out2; cache_initialize(); err = register_pernet_subsys(&sunrpc_net_ops); + if (err) + goto out3; + + err = register_rpc_pipefs(); if (err) goto out4; #ifdef RPC_DEBUG @@ -98,11 +99,11 @@ init_sunrpc(void) return 0; out4: - rpcauth_remove_module(); + unregister_pernet_subsys(&sunrpc_net_ops); out3: - rpc_destroy_mempool(); + rpcauth_remove_module(); out2: - unregister_rpc_pipefs(); + rpc_destroy_mempool(); out: return err; } -- cgit v1.2.3-18-g5258 From ca138f368a36dba40d3ef4a53d64af2011cda3c7 Mon Sep 17 00:00:00 2001 From: Fred Isaman Date: Thu, 5 Apr 2012 15:26:36 -0400 Subject: NFS: check for req==NULL in nfs_try_to_update_request cleanup Signed-off-by: Fred Isaman Signed-off-by: Trond Myklebust --- fs/nfs/write.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/nfs/write.c b/fs/nfs/write.c index 2c68818f68a..9b8d4d42a8a 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -682,7 +682,8 @@ static struct nfs_page *nfs_try_to_update_request(struct inode *inode, req->wb_bytes = rqend - req->wb_offset; out_unlock: spin_unlock(&inode->i_lock); - nfs_clear_request_commit(req); + if (req) + nfs_clear_request_commit(req); return req; out_flushme: spin_unlock(&inode->i_lock); -- cgit v1.2.3-18-g5258 From cbf2829b61c136edcba302a5e1b6b40e97d32c00 Mon Sep 17 00:00:00 2001 From: Bryan O'Donoghue Date: Wed, 18 Apr 2012 17:37:39 +0100 Subject: x86, apic: APIC code touches invalid MSR on P5 class machines Current APIC code assumes MSR_IA32_APICBASE is present for all systems. Pentium Classic P5 and friends didn't have this MSR. MSR_IA32_APICBASE was introduced as an architectural MSR by Intel @ P6. Code paths that can touch this MSR invalidly are when vendor == Intel && cpu-family == 5 and APIC bit is set in CPUID - or when you simply pass lapic on the kernel command line, on a P5. The below patch stops Linux incorrectly interfering with the MSR_IA32_APICBASE for P5 class machines. Other code paths exist that touch the MSR - however those paths are not currently reachable for a conformant P5. Signed-off-by: Bryan O'Donoghue Link: http://lkml.kernel.org/r/4F8EEDD3.1080404@linux.intel.com Signed-off-by: H. Peter Anvin Cc: --- arch/x86/kernel/apic/apic.c | 34 ++++++++++++++++++++-------------- 1 file changed, 20 insertions(+), 14 deletions(-) diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 11544d8f1e9..edc24480469 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1637,9 +1637,11 @@ static int __init apic_verify(void) mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; /* The BIOS may have set up the APIC at some other address */ - rdmsr(MSR_IA32_APICBASE, l, h); - if (l & MSR_IA32_APICBASE_ENABLE) - mp_lapic_addr = l & MSR_IA32_APICBASE_BASE; + if (boot_cpu_data.x86 >= 6) { + rdmsr(MSR_IA32_APICBASE, l, h); + if (l & MSR_IA32_APICBASE_ENABLE) + mp_lapic_addr = l & MSR_IA32_APICBASE_BASE; + } pr_info("Found and enabled local APIC!\n"); return 0; @@ -1657,13 +1659,15 @@ int __init apic_force_enable(unsigned long addr) * MSR. This can only be done in software for Intel P6 or later * and AMD K7 (Model > 1) or later. */ - rdmsr(MSR_IA32_APICBASE, l, h); - if (!(l & MSR_IA32_APICBASE_ENABLE)) { - pr_info("Local APIC disabled by BIOS -- reenabling.\n"); - l &= ~MSR_IA32_APICBASE_BASE; - l |= MSR_IA32_APICBASE_ENABLE | addr; - wrmsr(MSR_IA32_APICBASE, l, h); - enabled_via_apicbase = 1; + if (boot_cpu_data.x86 >= 6) { + rdmsr(MSR_IA32_APICBASE, l, h); + if (!(l & MSR_IA32_APICBASE_ENABLE)) { + pr_info("Local APIC disabled by BIOS -- reenabling.\n"); + l &= ~MSR_IA32_APICBASE_BASE; + l |= MSR_IA32_APICBASE_ENABLE | addr; + wrmsr(MSR_IA32_APICBASE, l, h); + enabled_via_apicbase = 1; + } } return apic_verify(); } @@ -2209,10 +2213,12 @@ static void lapic_resume(void) * FIXME! This will be wrong if we ever support suspend on * SMP! We'll need to do this as part of the CPU restore! */ - rdmsr(MSR_IA32_APICBASE, l, h); - l &= ~MSR_IA32_APICBASE_BASE; - l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; - wrmsr(MSR_IA32_APICBASE, l, h); + if (boot_cpu_data.x86 >= 6) { + rdmsr(MSR_IA32_APICBASE, l, h); + l &= ~MSR_IA32_APICBASE_BASE; + l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; + wrmsr(MSR_IA32_APICBASE, l, h); + } } maxlvt = lapic_get_maxlvt(); -- cgit v1.2.3-18-g5258 From 848cce0d4102b5b4b26b0987b43e1919d462afe2 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 21 Feb 2012 17:04:28 +0800 Subject: Btrfs: avoid setting ->d_op twice Follow those instructions, and you'll trigger a warning in the beginning of d_set_d_op(): # mkfs.btrfs /dev/loop3 # mount /dev/loop3 /mnt # btrfs sub create /mnt/sub # btrfs sub snap /mnt /mnt/snap # touch /mnt/snap/sub touch: cannot touch `tmp': Permission denied __d_alloc() set d_op to sb->s_d_op (btrfs_dentry_operations), and then simple_lookup() reset it to simple_dentry_operations, which triggered the warning. Signed-off-by: Li Zefan --- fs/btrfs/inode.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 1be31368e88..a682c267576 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -4069,7 +4069,7 @@ static struct inode *new_simple_dir(struct super_block *s, BTRFS_I(inode)->dummy_inode = 1; inode->i_ino = BTRFS_EMPTY_SUBVOL_DIR_OBJECTID; - inode->i_op = &simple_dir_inode_operations; + inode->i_op = &btrfs_dir_ro_inode_operations; inode->i_fop = &simple_dir_operations; inode->i_mode = S_IFDIR | S_IRUGO | S_IWUSR | S_IXUGO; inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME; @@ -4140,14 +4140,18 @@ struct inode *btrfs_lookup_dentry(struct inode *dir, struct dentry *dentry) static int btrfs_dentry_delete(const struct dentry *dentry) { struct btrfs_root *root; + struct inode *inode = dentry->d_inode; - if (!dentry->d_inode && !IS_ROOT(dentry)) - dentry = dentry->d_parent; + if (!inode && !IS_ROOT(dentry)) + inode = dentry->d_parent->d_inode; - if (dentry->d_inode) { - root = BTRFS_I(dentry->d_inode)->root; + if (inode) { + root = BTRFS_I(inode)->root; if (btrfs_root_refs(&root->root_item) == 0) return 1; + + if (btrfs_ino(inode) == BTRFS_EMPTY_SUBVOL_DIR_OBJECTID) + return 1; } return 0; } -- cgit v1.2.3-18-g5258 From 8c9c2bf7a3c4f7e9d158c0be9c49f372fb943ad2 Mon Sep 17 00:00:00 2001 From: Arne Jansen Date: Sat, 25 Feb 2012 09:09:30 +0100 Subject: btrfs: fix race in reada When inserting into the radix tree returns EEXIST, get the existing entry without giving up the spinlock in between. There was a race for both the zones trees and the extent tree. Signed-off-by: Arne Jansen --- fs/btrfs/inode.c | 8 +++++++- fs/btrfs/reada.c | 35 ++++++++++++++++------------------- 2 files changed, 23 insertions(+), 20 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index a682c267576..98ee5a51aa2 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -4332,7 +4332,13 @@ static int btrfs_real_readdir(struct file *filp, void *dirent, } no_dentry: /* is this a reference to our own snapshot? If so - * skip it + * skip it. + * + * In contrast to old kernels, we insert the snapshot's + * dir item and dir index after it has been created, so + * we won't find a reference to our own snapshot. We + * still keep the following code for backward + * compatibility. */ if (location.type == BTRFS_ROOT_ITEM_KEY && location.objectid == root->root_key.objectid) { diff --git a/fs/btrfs/reada.c b/fs/btrfs/reada.c index dc5d33146fd..8dec650099c 100644 --- a/fs/btrfs/reada.c +++ b/fs/btrfs/reada.c @@ -250,14 +250,12 @@ static struct reada_zone *reada_find_zone(struct btrfs_fs_info *fs_info, struct btrfs_bio *bbio) { int ret; - int looped = 0; struct reada_zone *zone; struct btrfs_block_group_cache *cache = NULL; u64 start; u64 end; int i; -again: zone = NULL; spin_lock(&fs_info->reada_lock); ret = radix_tree_gang_lookup(&dev->reada_zones, (void **)&zone, @@ -274,9 +272,6 @@ again: spin_unlock(&fs_info->reada_lock); } - if (looped) - return NULL; - cache = btrfs_lookup_block_group(fs_info, logical); if (!cache) return NULL; @@ -307,13 +302,15 @@ again: ret = radix_tree_insert(&dev->reada_zones, (unsigned long)(zone->end >> PAGE_CACHE_SHIFT), zone); - spin_unlock(&fs_info->reada_lock); - if (ret) { + if (ret == -EEXIST) { kfree(zone); - looped = 1; - goto again; + ret = radix_tree_gang_lookup(&dev->reada_zones, (void **)&zone, + logical >> PAGE_CACHE_SHIFT, 1); + if (ret == 1) + kref_get(&zone->refcnt); } + spin_unlock(&fs_info->reada_lock); return zone; } @@ -323,8 +320,8 @@ static struct reada_extent *reada_find_extent(struct btrfs_root *root, struct btrfs_key *top, int level) { int ret; - int looped = 0; struct reada_extent *re = NULL; + struct reada_extent *re_exist = NULL; struct btrfs_fs_info *fs_info = root->fs_info; struct btrfs_mapping_tree *map_tree = &fs_info->mapping_tree; struct btrfs_bio *bbio = NULL; @@ -335,14 +332,13 @@ static struct reada_extent *reada_find_extent(struct btrfs_root *root, int i; unsigned long index = logical >> PAGE_CACHE_SHIFT; -again: spin_lock(&fs_info->reada_lock); re = radix_tree_lookup(&fs_info->reada_tree, index); if (re) kref_get(&re->refcnt); spin_unlock(&fs_info->reada_lock); - if (re || looped) + if (re) return re; re = kzalloc(sizeof(*re), GFP_NOFS); @@ -398,12 +394,15 @@ again: /* insert extent in reada_tree + all per-device trees, all or nothing */ spin_lock(&fs_info->reada_lock); ret = radix_tree_insert(&fs_info->reada_tree, index, re); + if (ret == -EEXIST) { + re_exist = radix_tree_lookup(&fs_info->reada_tree, index); + BUG_ON(!re_exist); + kref_get(&re_exist->refcnt); + spin_unlock(&fs_info->reada_lock); + goto error; + } if (ret) { spin_unlock(&fs_info->reada_lock); - if (ret != -ENOMEM) { - /* someone inserted the extent in the meantime */ - looped = 1; - } goto error; } for (i = 0; i < nzones; ++i) { @@ -450,9 +449,7 @@ error: } kfree(bbio); kfree(re); - if (looped) - goto again; - return NULL; + return re_exist; } static void reada_kref_dummy(struct kref *kr) -- cgit v1.2.3-18-g5258 From 207a232ccac0a8cb79d304bd17298dbc96e2e082 Mon Sep 17 00:00:00 2001 From: Arne Jansen Date: Sat, 25 Feb 2012 09:09:47 +0100 Subject: btrfs: don't add both copies of DUP to reada extent tree Normally when there are 2 copies of a block, we add both to the reada extent tree and prefetch only the one that is easier to reach. This way we can better utilize multiple devices. In case of DUP this makes no sense as both copies reside on the same device. Signed-off-by: Arne Jansen --- fs/btrfs/reada.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/fs/btrfs/reada.c b/fs/btrfs/reada.c index 8dec650099c..ac5d0108588 100644 --- a/fs/btrfs/reada.c +++ b/fs/btrfs/reada.c @@ -326,6 +326,7 @@ static struct reada_extent *reada_find_extent(struct btrfs_root *root, struct btrfs_mapping_tree *map_tree = &fs_info->mapping_tree; struct btrfs_bio *bbio = NULL; struct btrfs_device *dev; + struct btrfs_device *prev_dev; u32 blocksize; u64 length; int nzones = 0; @@ -405,8 +406,20 @@ static struct reada_extent *reada_find_extent(struct btrfs_root *root, spin_unlock(&fs_info->reada_lock); goto error; } + prev_dev = NULL; for (i = 0; i < nzones; ++i) { dev = bbio->stripes[i].dev; + if (dev == prev_dev) { + /* + * in case of DUP, just add the first zone. As both + * are on the same device, there's nothing to gain + * from adding both. + * Also, it wouldn't work, as the tree is per device + * and adding would fail with EEXIST + */ + continue; + } + prev_dev = dev; ret = radix_tree_insert(&dev->reada_extents, index, re); if (ret) { while (--i >= 0) { -- cgit v1.2.3-18-g5258 From 8d082fb727ac11930ea20bf1612e334ea7c2b697 Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Tue, 3 Apr 2012 09:56:53 +0800 Subject: Btrfs: do not mount when we have a sectorsize unequal to PAGE_SIZE Our code is not ready to cope with a sectorsize that's not equal to PAGE_SIZE. It will lead to hanging-on while writing something. Signed-off-by: Liu Bo --- fs/btrfs/disk-io.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 20196f41120..b9866f27ebd 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -2254,9 +2254,9 @@ int open_ctree(struct super_block *sb, goto fail_sb_buffer; } - if (sectorsize < PAGE_SIZE) { - printk(KERN_WARNING "btrfs: Incompatible sector size " - "found on %s\n", sb->s_id); + if (sectorsize != PAGE_SIZE) { + printk(KERN_WARNING "btrfs: Incompatible sector size(%lu) " + "found on %s\n", (unsigned long)sectorsize, sb->s_id); goto fail_sb_buffer; } -- cgit v1.2.3-18-g5258 From 871383be592ba7e819d27556591e315a0df38cee Mon Sep 17 00:00:00 2001 From: David Sterba Date: Mon, 2 Apr 2012 18:31:37 +0200 Subject: btrfs: add missing unlocks to transaction abort paths Added in commit 49b25e0540904be0bf558b84475c69d72e4de66e ("btrfs: enhance transaction abort infrastructure") Reported-by: Dan Carpenter Signed-off-by: David Sterba --- fs/btrfs/transaction.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 11b77a59db6..36422254ef6 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -73,8 +73,10 @@ loop: cur_trans = root->fs_info->running_transaction; if (cur_trans) { - if (cur_trans->aborted) + if (cur_trans->aborted) { + spin_unlock(&root->fs_info->trans_lock); return cur_trans->aborted; + } atomic_inc(&cur_trans->use_count); atomic_inc(&cur_trans->num_writers); cur_trans->num_joined++; @@ -1400,6 +1402,7 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans, ret = commit_fs_roots(trans, root); if (ret) { mutex_unlock(&root->fs_info->tree_log_mutex); + mutex_unlock(&root->fs_info->reloc_mutex); goto cleanup_transaction; } @@ -1411,6 +1414,7 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans, ret = commit_cowonly_roots(trans, root); if (ret) { mutex_unlock(&root->fs_info->tree_log_mutex); + mutex_unlock(&root->fs_info->reloc_mutex); goto cleanup_transaction; } -- cgit v1.2.3-18-g5258 From 8e52acf70459020d7e9e9fda25066be4da520943 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Mon, 12 Mar 2012 16:39:28 +0800 Subject: Btrfs: retrurn void from clear_state_bit Currently it returns a set of bits that were cleared, but this return value is not used at all. Moreover it doesn't seem to be useful, because we may clear the bits of a few extent_states, but only the cleared bits of last one is returned. Signed-off-by: Li Zefan --- fs/btrfs/extent_io.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 4789770f8ea..05951bdf72c 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -404,18 +404,16 @@ static int split_state(struct extent_io_tree *tree, struct extent_state *orig, /* * utility function to clear some bits in an extent state struct. - * it will optionally wake up any one waiting on this state (wake == 1), or - * forcibly remove the state from the tree (delete == 1). + * it will optionally wake up any one waiting on this state (wake == 1) * * If no bits are set on the state struct after clearing things, the * struct is freed and removed from the tree */ -static int clear_state_bit(struct extent_io_tree *tree, +static void clear_state_bit(struct extent_io_tree *tree, struct extent_state *state, int *bits, int wake) { int bits_to_clear = *bits & ~EXTENT_CTLBITS; - int ret = state->state & bits_to_clear; if ((bits_to_clear & EXTENT_DIRTY) && (state->state & EXTENT_DIRTY)) { u64 range = state->end - state->start + 1; @@ -437,7 +435,6 @@ static int clear_state_bit(struct extent_io_tree *tree, } else { merge_state(tree, state); } - return ret; } static struct extent_state * -- cgit v1.2.3-18-g5258 From cdc6a3952558f00b1bc3b6401e1cf98797632fe2 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Mon, 12 Mar 2012 16:39:48 +0800 Subject: Btrfs: avoid possible use-after-free in clear_extent_bit() clear_extent_bit() { next_node = rb_next(&state->rb_node); ... clear_state_bit(state); <-- this may free next_node if (next_node) { state = rb_entry(next_node); ... } } clear_state_bit() calls merge_state() which may free the next node of the passing extent_state, so clear_extent_bit() may end up referencing freed memory. Signed-off-by: Li Zefan --- fs/btrfs/extent_io.c | 36 +++++++++++++++++++++--------------- 1 file changed, 21 insertions(+), 15 deletions(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 05951bdf72c..11eeb81fe69 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -402,6 +402,15 @@ static int split_state(struct extent_io_tree *tree, struct extent_state *orig, return 0; } +static struct extent_state *next_state(struct extent_state *state) +{ + struct rb_node *next = rb_next(&state->rb_node); + if (next) + return rb_entry(next, struct extent_state, rb_node); + else + return NULL; +} + /* * utility function to clear some bits in an extent state struct. * it will optionally wake up any one waiting on this state (wake == 1) @@ -409,10 +418,11 @@ static int split_state(struct extent_io_tree *tree, struct extent_state *orig, * If no bits are set on the state struct after clearing things, the * struct is freed and removed from the tree */ -static void clear_state_bit(struct extent_io_tree *tree, - struct extent_state *state, - int *bits, int wake) +static struct extent_state *clear_state_bit(struct extent_io_tree *tree, + struct extent_state *state, + int *bits, int wake) { + struct extent_state *next; int bits_to_clear = *bits & ~EXTENT_CTLBITS; if ((bits_to_clear & EXTENT_DIRTY) && (state->state & EXTENT_DIRTY)) { @@ -425,6 +435,7 @@ static void clear_state_bit(struct extent_io_tree *tree, if (wake) wake_up(&state->wq); if (state->state == 0) { + next = next_state(state); if (state->tree) { rb_erase(&state->rb_node, &tree->state); state->tree = NULL; @@ -434,7 +445,9 @@ static void clear_state_bit(struct extent_io_tree *tree, } } else { merge_state(tree, state); + next = next_state(state); } + return next; } static struct extent_state * @@ -473,7 +486,6 @@ int clear_extent_bit(struct extent_io_tree *tree, u64 start, u64 end, struct extent_state *state; struct extent_state *cached; struct extent_state *prealloc = NULL; - struct rb_node *next_node; struct rb_node *node; u64 last_end; int err; @@ -525,14 +537,11 @@ hit_next: WARN_ON(state->end < start); last_end = state->end; - if (state->end < end && !need_resched()) - next_node = rb_next(&state->rb_node); - else - next_node = NULL; - /* the state doesn't have the wanted bits, go ahead */ - if (!(state->state & bits)) + if (!(state->state & bits)) { + state = next_state(state); goto next; + } /* * | ---- desired range ---- | @@ -590,16 +599,13 @@ hit_next: goto out; } - clear_state_bit(tree, state, &bits, wake); + state = clear_state_bit(tree, state, &bits, wake); next: if (last_end == (u64)-1) goto out; start = last_end + 1; - if (start <= end && next_node) { - state = rb_entry(next_node, struct extent_state, - rb_node); + if (start <= end && state && !need_resched()) goto hit_next; - } goto search_again; out: -- cgit v1.2.3-18-g5258 From 4735fb282830c0966b301dabcccf4753fa6604bb Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Thu, 12 Apr 2012 22:47:52 +0200 Subject: Btrfs: Make free_ipath() deal gracefully with NULL pointers Make free_ipath() behave like most other freeing functions in the kernel and gracefully do nothing when passed a NULL pointer. Besides this making the bahaviour consistent with functions such as kfree(), vfree(), btrfs_free_path() etc etc, it also fixes a real NULL deref issue in fs/btrfs/ioctl.c::btrfs_ioctl_ino_to_path(). In that function we have this code: ... ipath = init_ipath(size, root, path); if (IS_ERR(ipath)) { ret = PTR_ERR(ipath); ipath = NULL; goto out; } ... out: btrfs_free_path(path); free_ipath(ipath); ... If we ever take the true branch of that 'if' statement we'll end up passing a NULL pointer to free_ipath() which will subsequently dereference it and we'll go "Boom" :-( This patch will avoid that. Signed-off-by: Jesper Juhl --- fs/btrfs/backref.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c index f4e90748940..b332ff04c5e 100644 --- a/fs/btrfs/backref.c +++ b/fs/btrfs/backref.c @@ -1414,6 +1414,8 @@ struct inode_fs_paths *init_ipath(s32 total_bytes, struct btrfs_root *fs_root, void free_ipath(struct inode_fs_paths *ipath) { + if (!ipath) + return; kfree(ipath->fspath); kfree(ipath); } -- cgit v1.2.3-18-g5258 From aefc1eb13ebbb86c5ffade8a9e2425cd71032d7e Mon Sep 17 00:00:00 2001 From: Jan Schmidt Date: Fri, 13 Apr 2012 12:28:00 +0200 Subject: Btrfs: don't call free_extent_buffer twice in iterate_irefs Avoid calling free_extent_buffer more than once when the iterator function returns non-zero. The only code that uses this is scrub repair for corrupted nodatasum blocks. Signed-off-by: Jan Schmidt --- fs/btrfs/backref.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c index b332ff04c5e..fb56bcc8037 100644 --- a/fs/btrfs/backref.c +++ b/fs/btrfs/backref.c @@ -1247,7 +1247,7 @@ static int iterate_irefs(u64 inum, struct btrfs_root *fs_root, struct btrfs_path *path, iterate_irefs_t *iterate, void *ctx) { - int ret; + int ret = 0; int slot; u32 cur; u32 len; @@ -1259,7 +1259,7 @@ static int iterate_irefs(u64 inum, struct btrfs_root *fs_root, struct btrfs_inode_ref *iref; struct btrfs_key found_key; - while (1) { + while (!ret) { ret = inode_ref_info(inum, parent ? parent+1 : 0, fs_root, path, &found_key); if (ret < 0) @@ -1288,10 +1288,8 @@ static int iterate_irefs(u64 inum, struct btrfs_root *fs_root, (unsigned long long)found_key.objectid, (unsigned long long)fs_root->objectid); ret = iterate(parent, iref, eb, ctx); - if (ret) { - free_extent_buffer(eb); + if (ret) break; - } len = sizeof(*iref) + name_len; iref = (struct btrfs_inode_ref *)((char *)iref + len); } -- cgit v1.2.3-18-g5258 From b916a59adfdc875381b68ced258694b434cf43ae Mon Sep 17 00:00:00 2001 From: Jan Schmidt Date: Fri, 13 Apr 2012 12:28:08 +0200 Subject: Btrfs: add missing read locks in backref.c iref_to_path and iterate_irefs both increment the eb's refcount to use it after releasing the path. Both depend on consistent data remaining in the extent buffer and need a read lock to protect it. Signed-off-by: Jan Schmidt --- fs/btrfs/backref.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c index fb56bcc8037..bcec0675023 100644 --- a/fs/btrfs/backref.c +++ b/fs/btrfs/backref.c @@ -22,6 +22,7 @@ #include "ulist.h" #include "transaction.h" #include "delayed-ref.h" +#include "locking.h" /* * this structure records all encountered refs on the way up to the root @@ -893,18 +894,22 @@ static char *iref_to_path(struct btrfs_root *fs_root, struct btrfs_path *path, s64 bytes_left = size - 1; struct extent_buffer *eb = eb_in; struct btrfs_key found_key; + int leave_spinning = path->leave_spinning; if (bytes_left >= 0) dest[bytes_left] = '\0'; + path->leave_spinning = 1; while (1) { len = btrfs_inode_ref_name_len(eb, iref); bytes_left -= len; if (bytes_left >= 0) read_extent_buffer(eb, dest + bytes_left, (unsigned long)(iref + 1), len); - if (eb != eb_in) + if (eb != eb_in) { + btrfs_tree_read_unlock_blocking(eb); free_extent_buffer(eb); + } ret = inode_ref_info(parent, 0, fs_root, path, &found_key); if (ret > 0) ret = -ENOENT; @@ -919,8 +924,11 @@ static char *iref_to_path(struct btrfs_root *fs_root, struct btrfs_path *path, slot = path->slots[0]; eb = path->nodes[0]; /* make sure we can use eb after releasing the path */ - if (eb != eb_in) + if (eb != eb_in) { atomic_inc(&eb->refs); + btrfs_tree_read_lock(eb); + btrfs_set_lock_blocking_rw(eb, BTRFS_READ_LOCK); + } btrfs_release_path(path); iref = btrfs_item_ptr(eb, slot, struct btrfs_inode_ref); @@ -931,6 +939,7 @@ static char *iref_to_path(struct btrfs_root *fs_root, struct btrfs_path *path, } btrfs_release_path(path); + path->leave_spinning = leave_spinning; if (ret) return ERR_PTR(ret); @@ -1260,6 +1269,7 @@ static int iterate_irefs(u64 inum, struct btrfs_root *fs_root, struct btrfs_key found_key; while (!ret) { + path->leave_spinning = 1; ret = inode_ref_info(inum, parent ? parent+1 : 0, fs_root, path, &found_key); if (ret < 0) @@ -1275,6 +1285,8 @@ static int iterate_irefs(u64 inum, struct btrfs_root *fs_root, eb = path->nodes[0]; /* make sure we can use eb after releasing the path */ atomic_inc(&eb->refs); + btrfs_tree_read_lock(eb); + btrfs_set_lock_blocking_rw(eb, BTRFS_READ_LOCK); btrfs_release_path(path); item = btrfs_item_nr(eb, slot); @@ -1293,6 +1305,7 @@ static int iterate_irefs(u64 inum, struct btrfs_root *fs_root, len = sizeof(*iref) + name_len; iref = (struct btrfs_inode_ref *)((char *)iref + len); } + btrfs_tree_read_unlock_blocking(eb); free_extent_buffer(eb); } -- cgit v1.2.3-18-g5258 From 37db63a400d3bac467795aa43901065fd8d903b7 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Fri, 13 Apr 2012 17:05:08 +0300 Subject: Btrfs: fix max chunk size check in chunk allocator Fix a bug, where in case we need to adjust stripe_size so that the length of the resulting chunk is less than or equal to max_chunk_size, DUP chunks turn out to be only half as big as they could be. Cc: Arne Jansen Signed-off-by: Ilya Dryomov --- fs/btrfs/volumes.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 759d02486d7..ce289af526f 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -3324,12 +3324,14 @@ static int __btrfs_alloc_chunk(struct btrfs_trans_handle *trans, stripe_size = devices_info[ndevs-1].max_avail; num_stripes = ndevs * dev_stripes; - if (stripe_size * num_stripes > max_chunk_size * ncopies) { + if (stripe_size * ndevs > max_chunk_size * ncopies) { stripe_size = max_chunk_size * ncopies; - do_div(stripe_size, num_stripes); + do_div(stripe_size, ndevs); } do_div(stripe_size, dev_stripes); + + /* align to BTRFS_STRIPE_LEN */ do_div(stripe_size, BTRFS_STRIPE_LEN); stripe_size *= BTRFS_STRIPE_LEN; -- cgit v1.2.3-18-g5258 From 8a3db1849e9e2563727ea2dc32737502e0096641 Mon Sep 17 00:00:00 2001 From: Sergei Trofimovich Date: Mon, 16 Apr 2012 06:44:37 +0300 Subject: btrfs: fix early abort in 'remount' Cc: Jeff Mahoney Cc: Chris Mason Cc: Josef Bacik Signed-off-by: Sergei Trofimovich --- fs/btrfs/super.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 84571d7da12..43aa2dd0bc7 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -1152,13 +1152,15 @@ static int btrfs_remount(struct super_block *sb, int *flags, char *data) if (ret) goto restore; } else { - if (fs_info->fs_devices->rw_devices == 0) + if (fs_info->fs_devices->rw_devices == 0) { ret = -EACCES; goto restore; + } - if (btrfs_super_log_root(fs_info->super_copy) != 0) + if (btrfs_super_log_root(fs_info->super_copy) != 0) { ret = -EINVAL; goto restore; + } ret = btrfs_cleanup_fs_roots(fs_info); if (ret) -- cgit v1.2.3-18-g5258 From 48d282326b3ce5f435835f5fb0e3231c399f4f9a Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 14 Apr 2012 11:24:33 +0200 Subject: fs/btrfs/volumes.c: add missing free_fs_devices Free fs_devices as done in the error-handling code just below. Signed-off-by: Julia Lawall --- fs/btrfs/volumes.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index ce289af526f..3b984173d25 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -4352,8 +4352,10 @@ static int open_seed_devices(struct btrfs_root *root, u8 *fsid) ret = __btrfs_open_devices(fs_devices, FMODE_READ, root->fs_info->bdev_holder); - if (ret) + if (ret) { + free_fs_devices(fs_devices); goto out; + } if (!fs_devices->seeding) { __btrfs_close_devices(fs_devices); -- cgit v1.2.3-18-g5258 From 5cf1ab56133ad7b712673c071b439d4a555a2d1e Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Mon, 16 Apr 2012 09:42:26 -0400 Subject: Btrfs: always store the mirror we read the eb from A user reported a panic where we were trying to fix a bad mirror but the mirror number we were giving was 0, which is invalid. This is because we don't do the transid verification until after the read, so as far as the read code is concerned the read was a success. So instead store the mirror we read from so that if there is some failure post read we know which mirror to try next and which mirror needs to be fixed if we find a good copy of the block. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/disk-io.c | 16 ++++++++-------- fs/btrfs/extent_io.c | 15 ++++++--------- fs/btrfs/extent_io.h | 4 ++-- fs/btrfs/inode.c | 2 +- 4 files changed, 17 insertions(+), 20 deletions(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index b9866f27ebd..d0c969beaad 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -383,17 +383,16 @@ static int btree_read_extent_buffer_pages(struct btrfs_root *root, if (test_bit(EXTENT_BUFFER_CORRUPT, &eb->bflags)) break; - if (!failed_mirror) { - failed = 1; - printk(KERN_ERR "failed mirror was %d\n", eb->failed_mirror); - failed_mirror = eb->failed_mirror; - } - num_copies = btrfs_num_copies(&root->fs_info->mapping_tree, eb->start, eb->len); if (num_copies == 1) break; + if (!failed_mirror) { + failed = 1; + failed_mirror = eb->read_mirror; + } + mirror_num++; if (mirror_num == failed_mirror) mirror_num++; @@ -564,7 +563,7 @@ struct extent_buffer *find_eb_for_page(struct extent_io_tree *tree, } static int btree_readpage_end_io_hook(struct page *page, u64 start, u64 end, - struct extent_state *state) + struct extent_state *state, int mirror) { struct extent_io_tree *tree; u64 found_start; @@ -589,6 +588,7 @@ static int btree_readpage_end_io_hook(struct page *page, u64 start, u64 end, if (!reads_done) goto err; + eb->read_mirror = mirror; if (test_bit(EXTENT_BUFFER_IOERR, &eb->bflags)) { ret = -EIO; goto err; @@ -652,7 +652,7 @@ static int btree_io_failed_hook(struct page *page, int failed_mirror) eb = (struct extent_buffer *)page->private; set_bit(EXTENT_BUFFER_IOERR, &eb->bflags); - eb->failed_mirror = failed_mirror; + eb->read_mirror = failed_mirror; if (test_and_clear_bit(EXTENT_BUFFER_READAHEAD, &eb->bflags)) btree_readahead_hook(root, eb, eb->start, -EIO); return -EIO; /* we fixed nothing */ diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 11eeb81fe69..0c23e57077c 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -2304,7 +2304,7 @@ static void end_bio_extent_readpage(struct bio *bio, int err) u64 start; u64 end; int whole_page; - int failed_mirror; + int mirror; int ret; if (err) @@ -2343,20 +2343,18 @@ static void end_bio_extent_readpage(struct bio *bio, int err) } spin_unlock(&tree->lock); + mirror = (int)(unsigned long)bio->bi_bdev; if (uptodate && tree->ops && tree->ops->readpage_end_io_hook) { ret = tree->ops->readpage_end_io_hook(page, start, end, - state); + state, mirror); if (ret) uptodate = 0; else clean_io_failure(start, page); } - if (!uptodate) - failed_mirror = (int)(unsigned long)bio->bi_bdev; - if (!uptodate && tree->ops && tree->ops->readpage_io_failed_hook) { - ret = tree->ops->readpage_io_failed_hook(page, failed_mirror); + ret = tree->ops->readpage_io_failed_hook(page, mirror); if (!ret && !err && test_bit(BIO_UPTODATE, &bio->bi_flags)) uptodate = 1; @@ -2371,8 +2369,7 @@ static void end_bio_extent_readpage(struct bio *bio, int err) * can't handle the error it will return -EIO and we * remain responsible for that page. */ - ret = bio_readpage_error(bio, page, start, end, - failed_mirror, NULL); + ret = bio_readpage_error(bio, page, start, end, mirror, NULL); if (ret == 0) { uptodate = test_bit(BIO_UPTODATE, &bio->bi_flags); @@ -4465,7 +4462,7 @@ int read_extent_buffer_pages(struct extent_io_tree *tree, } clear_bit(EXTENT_BUFFER_IOERR, &eb->bflags); - eb->failed_mirror = 0; + eb->read_mirror = 0; atomic_set(&eb->io_pages, num_reads); for (i = start_i; i < num_pages; i++) { page = extent_buffer_page(eb, i); diff --git a/fs/btrfs/extent_io.h b/fs/btrfs/extent_io.h index faf10eb57f7..b516c3b8dec 100644 --- a/fs/btrfs/extent_io.h +++ b/fs/btrfs/extent_io.h @@ -79,7 +79,7 @@ struct extent_io_ops { u64 start, u64 end, struct extent_state *state); int (*readpage_end_io_hook)(struct page *page, u64 start, u64 end, - struct extent_state *state); + struct extent_state *state, int mirror); int (*writepage_end_io_hook)(struct page *page, u64 start, u64 end, struct extent_state *state, int uptodate); void (*set_bit_hook)(struct inode *inode, struct extent_state *state, @@ -135,7 +135,7 @@ struct extent_buffer { spinlock_t refs_lock; atomic_t refs; atomic_t io_pages; - int failed_mirror; + int read_mirror; struct list_head leak_list; struct rcu_head rcu_head; pid_t lock_owner; diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 98ee5a51aa2..d953f882046 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -1947,7 +1947,7 @@ static int btrfs_writepage_end_io_hook(struct page *page, u64 start, u64 end, * extent_io.c will try to find good copies for us. */ static int btrfs_readpage_end_io_hook(struct page *page, u64 start, u64 end, - struct extent_state *state) + struct extent_state *state, int mirror) { size_t offset = start - ((u64)page->index << PAGE_CACHE_SHIFT); struct inode *inode = page->mapping->host; -- cgit v1.2.3-18-g5258 From 253beebd5a255e07d6a8b65515491f33664e82a2 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 18 Apr 2012 09:59:03 +0300 Subject: Btrfs: double unlock bug in error handling The caller expects this function to return with the lock held and releases it immediately on error. Signed-off-by: Dan Carpenter --- fs/btrfs/extent-tree.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 2b35f8d14bb..a0bb9dcd3c3 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -2301,6 +2301,7 @@ static noinline int run_clustered_refs(struct btrfs_trans_handle *trans, if (ret) { printk(KERN_DEBUG "btrfs: run_delayed_extent_op returned %d\n", ret); + spin_lock(&delayed_refs->lock); return ret; } @@ -2331,6 +2332,7 @@ static noinline int run_clustered_refs(struct btrfs_trans_handle *trans, if (ret) { printk(KERN_DEBUG "btrfs: run_one_delayed_ref returned %d\n", ret); + spin_lock(&delayed_refs->lock); return ret; } -- cgit v1.2.3-18-g5258 From b9688bb8459b67e42327de6420edb405a9188775 Mon Sep 17 00:00:00 2001 From: Arne Jansen Date: Wed, 18 Apr 2012 10:27:16 +0200 Subject: btrfs: don't return EINTR It is basically a good thing if we are interruptible when waiting for free space, but the generality in which it is implemented currently leads to system calls being interruptible that are not documented this way. For example git can't handle interrupted unlink(), leading to corrupt repos under space pressure. Instead we raise the bar to only be interruptible by SIGKILL. Thanks to David Sterba for suggesting this. Signed-off-by: Arne Jansen --- fs/btrfs/extent-tree.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index a0bb9dcd3c3..84497f8eb04 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -3771,13 +3771,10 @@ again: */ if (current->journal_info) return -EAGAIN; - ret = wait_event_interruptible(space_info->wait, - !space_info->flush); - /* Must have been interrupted, return */ - if (ret) { - printk(KERN_DEBUG "btrfs: %s returning -EINTR\n", __func__); + ret = wait_event_killable(space_info->wait, !space_info->flush); + /* Must have been killed, return */ + if (ret) return -EINTR; - } spin_lock(&space_info->lock); } -- cgit v1.2.3-18-g5258 From 99ba55ad696944b37d5557bc5b4816890854fdb9 Mon Sep 17 00:00:00 2001 From: Stefan Behrens Date: Mon, 19 Mar 2012 16:17:22 +0100 Subject: Btrfs: fix btrfs_ioctl_dev_info() crash on missing device When a filesystem is mounted with the degraded option, it is possible that some of the devices are not there. btrfs_ioctl_dev_info() crashs in this case because the device name is a NULL pointer. This ioctl was only used for scrub. Signed-off-by: Stefan Behrens --- fs/btrfs/ioctl.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 18cc23d164a..14f8e1faa46 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -2262,7 +2262,10 @@ static long btrfs_ioctl_dev_info(struct btrfs_root *root, void __user *arg) di_args->bytes_used = dev->bytes_used; di_args->total_bytes = dev->total_bytes; memcpy(di_args->uuid, dev->uuid, sizeof(di_args->uuid)); - strncpy(di_args->path, dev->name, sizeof(di_args->path)); + if (dev->name) + strncpy(di_args->path, dev->name, sizeof(di_args->path)); + else + di_args->path[0] = '\0'; out: if (ret == 0 && copy_to_user(arg, di_args, sizeof(*di_args))) -- cgit v1.2.3-18-g5258 From 5c84fc3c3914e9adfa6155a167c6c0c2709e6a62 Mon Sep 17 00:00:00 2001 From: Stefan Behrens Date: Fri, 30 Mar 2012 13:58:31 +0200 Subject: Btrfs: don't count CRC or header errors twice while scrubbing Each CRC or header error was counted twice, this is now fixed. Signed-off-by: Stefan Behrens --- fs/btrfs/scrub.c | 15 --------------- 1 file changed, 15 deletions(-) diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c index 60f0e28db31..b679bf68861 100644 --- a/fs/btrfs/scrub.c +++ b/fs/btrfs/scrub.c @@ -1258,12 +1258,6 @@ static int scrub_checksum_data(struct scrub_block *sblock) if (memcmp(csum, on_disk_csum, sdev->csum_size)) fail = 1; - if (fail) { - spin_lock(&sdev->stat_lock); - ++sdev->stat.csum_errors; - spin_unlock(&sdev->stat_lock); - } - return fail; } @@ -1336,15 +1330,6 @@ static int scrub_checksum_tree_block(struct scrub_block *sblock) if (memcmp(calculated_csum, on_disk_csum, sdev->csum_size)) ++crc_fail; - if (crc_fail || fail) { - spin_lock(&sdev->stat_lock); - if (crc_fail) - ++sdev->stat.csum_errors; - if (fail) - ++sdev->stat.verify_errors; - spin_unlock(&sdev->stat_lock); - } - return fail || crc_fail; } -- cgit v1.2.3-18-g5258 From 25cd999e1a685dab65292afbe9fa24d790d8a859 Mon Sep 17 00:00:00 2001 From: Stefan Behrens Date: Fri, 30 Mar 2012 13:58:32 +0200 Subject: Btrfs: fix that check_int_data mount option was ignored The bitfield member mount_opt was too small by one bit to hold the mount option that enabled to include data extents in the integrity checker. Since the same issue happened when the BTRFS_MOUNT_PANIC_ON_FATAL_ERROR option was added (git rebase silently merges so that the increase of the size of the bitfield member is lost), the bit limit was removed entirely. Signed-off-by: Stefan Behrens --- fs/btrfs/ctree.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 5b8ef8eb352..ec42a24e935 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -1078,7 +1078,7 @@ struct btrfs_fs_info { * is required instead of the faster short fsync log commits */ u64 last_trans_log_full_commit; - unsigned long mount_opt:21; + unsigned long mount_opt; unsigned long compress_type:4; u64 max_inline; u64 alloc_start; -- cgit v1.2.3-18-g5258 From e88aa7bbbe3046a125ea1936b16bb921cc9c6349 Mon Sep 17 00:00:00 2001 From: David Miller Date: Thu, 12 Apr 2012 14:37:30 -0400 Subject: Fix modpost failures in fedora 17 The symbol table on x86-64 starts to have entries that have names like: _GLOBAL__sub_I_65535_0___mod_x86cpu_device_table They are of type STT_FUNCTION and this one had a length of 18. This matched the device ID validation logic and it barfed because the length did not meet the device type's criteria. -------------------- FATAL: arch/x86/crypto/aesni-intel: sizeof(struct x86cpu_device_id)=16 is not a modulo of the size of section __mod_x86cpu_device_table=18. Fix definition of struct x86cpu_device_id in mod_devicetable.h -------------------- These are some kind of compiler tool internal stuff being emitted and not something we want to inspect in modpost's device ID table validation code. So skip the symbol if it is not of type STT_OBJECT. Signed-off-by: David S. Miller Acked-by: Sam Ravnborg Signed-off-by: Michal Marek --- scripts/mod/file2alias.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c index 8e730ccc3f2..44ddaa542db 100644 --- a/scripts/mod/file2alias.c +++ b/scripts/mod/file2alias.c @@ -1100,6 +1100,10 @@ void handle_moddevtable(struct module *mod, struct elf_info *info, if (!sym->st_shndx || get_secindex(info, sym) >= info->num_sections) return; + /* We're looking for an object */ + if (ELF_ST_TYPE(sym->st_info) != STT_OBJECT) + return; + /* All our symbols are of form __mod_XXX_device_table. */ name = strstr(symname, "__mod_"); if (!name) -- cgit v1.2.3-18-g5258 From 22b4a4f22da4b39c6f7f679fd35f3d35c91bf851 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 18 Apr 2012 10:14:23 +0000 Subject: tcp: fix retransmit of partially acked frames Alexander Beregalov reported skb_over_panic errors and provided stack trace. I occurs commit a21d45726aca (tcp: avoid order-1 allocations on wifi and tx path) added a regression, when a retransmit is done after a partial ACK. tcp_retransmit_skb() tries to aggregate several frames if the first one has enough available room to hold the following ones payload. This is controlled by /proc/sys/net/ipv4/tcp_retrans_collapse tunable (default : enabled) Problem is we must make sure _pskb_trim_head() doesnt fool skb_availroom() when pulling some bytes from skb (this pull is done when receiver ACK part of the frame). Reported-by: Alexander Beregalov Cc: Marc MERLIN Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/tcp_output.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 376b2cfbb68..7ac6423117a 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -1096,6 +1096,7 @@ static void __pskb_trim_head(struct sk_buff *skb, int len) eat = min_t(int, len, skb_headlen(skb)); if (eat) { __skb_pull(skb, eat); + skb->avail_size -= eat; len -= eat; if (!len) return; -- cgit v1.2.3-18-g5258 From 1bc68a9e80a7b1ab8dbf1a97e43c5d6a99070bb3 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Mon, 16 Apr 2012 00:52:51 -0400 Subject: powerpc: fix system.h fallout in sysdev/scom.c [chroma_defconfig] The following shows up in chroma_defconfig: CC arch/powerpc/sysdev/scom.o arch/powerpc/sysdev/scom.c: In function 'scom_debug_init': arch/powerpc/sysdev/scom.c:182:36: error: 'powerpc_debugfs_root' undeclared (first use in this function) arch/powerpc/sysdev/scom.c:182:36: note: each undeclared identifier is reported only once for each function it appears in make[2]: *** [arch/powerpc/sysdev/scom.o] Error 1 make[1]: *** [arch/powerpc/sysdev/scom.o] Error 2 A bisect leads to commit 9ffc93f203c18a70623f21950f1dd473c9ec48cd "Remove all #inclusions of asm/system.h" Add the debug header which contains powerpc_debugfs_root. Acked-by: David Howells Signed-off-by: Paul Gortmaker --- arch/powerpc/sysdev/scom.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/sysdev/scom.c b/arch/powerpc/sysdev/scom.c index 49a3ece1c6b..702256a1ca1 100644 --- a/arch/powerpc/sysdev/scom.c +++ b/arch/powerpc/sysdev/scom.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include -- cgit v1.2.3-18-g5258 From 8d9a784d1e2c75e0dcae06f77a02f5e7bb547f3a Mon Sep 17 00:00:00 2001 From: Stuart Menefy Date: Tue, 14 Feb 2012 11:29:11 +0000 Subject: sh: Fix error synchronising kernel page tables The problem is caused by the interaction of two features in the Linux memory management code. A processes address space is described by a struct mm_struct, and every thread has a pointer to the mm it should run in. The exception to this are kernel threads, which don't have an mm, and so borrow the mm from the last thread which ran. The system is bootstrapped by the initial kernel thread using init's mm (even though init hasn't been created yet, its mm is the static init_mm). The other feature is how the kernel handles the page table which describes the portion of the address space which is only visible when executing inside the kernel, and which is shared by all threads. On the SH4 the only portion of the kernel's address space which described using the page table is called P3, from 0xc0000000 to 0xdfffffff. This portion of the address space is divided into three: - mappings for dma_alloc_coherent() - mappings for vmalloc() and ioremap() - fixmap mappings, primarily used in copy_user_pages() to create kernel mappings of user pages with the correct cache colour. To optimise the TLB miss handler we don't want to add an additional condition which checks whether the faulting address is in the user or the kernel portion of the address space, and so all page tables have a common portion which describes the kernel part of the address space. As the SH4 uses a two level page table, only the kernel portion of first level page table (the pgd entries) is duplicated. These all point to the same second level entries (the pte's), and so no memory is wasted. The reference page table for the kernel is called the swapper_pg_dir, and when a new page table is created for a new process the kernel portion of the page table is copied from swapper_pg_dir. This works fine when changes only occur in the second level of the kernel's page table, or the first level entries are created before any new user processes. However if a change occurs to the first level of the page table, and there are existing processes which don't have this entry in their page table, this new entry needs to be added. This is done on demand, when the kernel accesses a P3 address which isn't mapped using the current page table, the code in vmalloc_fault() copies the entry from the reference page table (swapper_pg_dir) into the current processes page table. The bug which this patch addresses is that the code in vmalloc_fault() was not copying addresses which fell in the dma_alloc_coherent() portion of the address space, and it should have been copying any P3 address. Why we hadn't seen this before, and what made this hard to reproduce, is that normally the kernel will have called dma_alloc_coherent(), and accessed the memory mapping created, before any user process runs. Typically drivers such as USB or SATA will have created and used mappings of this type during the kernel initialisation, when probing for the attached devices, before init runs. Ethernet is slightly different, as it normally only creates and accesses dma_alloc_coherent() mappings when the network is brought up, but if kernel level IP configuration is used this will also occur before any user space process runs. So the first reproduction of this problem which we saw was occurred when USB and SATA were removed from the kernel, and then bring up Ethernet from user space using ifconfig. I'd like to thank Joseph Bormolini who did the hard work reducing the problem to this simple to reproduce criteria. In your case the situation is slightly different, and turns out to depends on the exact kernel configuration (which we had) and your ramdisk contents (which we didn't - hence the need for some assumptions). In this case the problem is a side effect of kernel level module loading. Kernel subsystems sometimes trigger the load of kernel modules directly, for example the crypto subsystem tries to load the cryptomgr and MTD tries to load modules for Flash partitioning if these are not built into the kernel. This is done by the kernel creating a user process which runs insmod to try and load the appropriate module. In order for this to cause problems the system must be running with a initrd or initramfs, which contains an insmod executable - if the kernel can't find an insmod to run, no user process is created, and the problem doesn't occur. If an insmod is found, a process is created to run it, which will inherit the kernel portion of the swapper_pg_dir first level page table. It doesn't matter whether the inmod is successful or not, but when the the kernel scheduler context switches back to the kernel initialisation thread, the insmod's mm is 'borrowed' by the kernel thread, as it doesn't have an address space of its own. (Reference counting is used to ensure this mm is not destroyed, even though the user process which caused its creation may no longer exist.) If this address space doesn't have a first level page table entry for the consistent mappings, and a driver tries to access such a mapping, we are in the same situation as described above, except this time in a kernel thread rather than a user thread executing inside the kernel. See bugzilla: 15425, 15836, 15862, 16106, 16793 Signed-off-by: Stuart Menefy Signed-off-by: Paul Mundt --- arch/sh/mm/fault_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c index 324eef93c90..e99b104d967 100644 --- a/arch/sh/mm/fault_32.c +++ b/arch/sh/mm/fault_32.c @@ -86,7 +86,7 @@ static noinline int vmalloc_fault(unsigned long address) pte_t *pte_k; /* Make sure we are in vmalloc/module/P3 area: */ - if (!(address >= VMALLOC_START && address < P3_ADDR_MAX)) + if (!(address >= P3SEG && address < P3_ADDR_MAX)) return -1; /* -- cgit v1.2.3-18-g5258 From 15b120d67019d691e4389372967332d74a80522a Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 18 Apr 2012 13:59:30 +0300 Subject: usb: gadget: dummy: do not call pullup() on udc_stop() pullup() is already called properly by udc-core.c and there's no need to call it from udc_stop(), in fact that will cause issues. Cc: stable@vger.kernel.org Reviewed-by: Alexander Shishkin Acked-by: Alan Stern Signed-off-by: Felipe Balbi --- drivers/usb/gadget/dummy_hcd.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index a6dfd216416..170cbe89d9f 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -927,7 +927,6 @@ static int dummy_udc_stop(struct usb_gadget *g, dum->driver = NULL; - dummy_pullup(&dum->gadget, 0); return 0; } -- cgit v1.2.3-18-g5258 From a720b2dd2470a52345df11dca8d6c1466599f812 Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Thu, 19 Apr 2012 12:35:08 +0200 Subject: x86, intel_cacheinfo: Fix error return code in amd_set_l3_disable_slot() If the L3 disable slot is already in use, return -EEXIST instead of -EINVAL. The caller, store_cache_disable(), checks this return value to print an appropriate warning. Also, we want to signal with -EEXIST that the current index we're disabling has actually been already disabled on the node: $ echo 12 > /sys/devices/system/cpu/cpu3/cache/index3/cache_disable_0 $ echo 12 > /sys/devices/system/cpu/cpu3/cache/index3/cache_disable_0 -bash: echo: write error: File exists $ echo 12 > /sys/devices/system/cpu/cpu3/cache/index3/cache_disable_1 -bash: echo: write error: File exists $ echo 12 > /sys/devices/system/cpu/cpu5/cache/index3/cache_disable_1 -bash: echo: write error: File exists The old code would say -bash: echo: write error: Invalid argument for disable slot 1 when playing the example above with no output in dmesg, which is clearly misleading. Reported-by: Dan Carpenter Signed-off-by: Srivatsa S. Bhat Link: http://lkml.kernel.org/r/20120419070053.GB16645@elgon.mountain [Boris: add testing for the other index too] Signed-off-by: Borislav Petkov --- arch/x86/kernel/cpu/intel_cacheinfo.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index 73d08ed98a6..b8f3653dddb 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -433,14 +433,14 @@ int amd_set_l3_disable_slot(struct amd_northbridge *nb, int cpu, unsigned slot, /* check if @slot is already used or the index is already disabled */ ret = amd_get_l3_disable_slot(nb, slot); if (ret >= 0) - return -EINVAL; + return -EEXIST; if (index > nb->l3_cache.indices) return -EINVAL; /* check whether the other slot has disabled the same index already */ if (index == amd_get_l3_disable_slot(nb, !slot)) - return -EINVAL; + return -EEXIST; amd_l3_disable_index(nb, cpu, slot, index); @@ -468,8 +468,8 @@ static ssize_t store_cache_disable(struct _cpuid4_info *this_leaf, err = amd_set_l3_disable_slot(this_leaf->base.nb, cpu, slot, val); if (err) { if (err == -EEXIST) - printk(KERN_WARNING "L3 disable slot %d in use!\n", - slot); + pr_warning("L3 slot %d in use/index already disabled!\n", + slot); return err; } return count; -- cgit v1.2.3-18-g5258 From 05ffe24f5290dc095f98fbaf84afe51ef404ccc5 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 18 Apr 2012 12:20:10 -0400 Subject: NFSv4: Ensure that the LOCK code sets exception->inode All callers of nfs4_handle_exception() that need to handle NFS4ERR_OPENMODE correctly should set exception->inode Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org --- fs/nfs/nfs4proc.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index f82bde005a8..3c787d02131 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -4558,7 +4558,9 @@ static int _nfs4_do_setlk(struct nfs4_state *state, int cmd, struct file_lock *f static int nfs4_lock_reclaim(struct nfs4_state *state, struct file_lock *request) { struct nfs_server *server = NFS_SERVER(state->inode); - struct nfs4_exception exception = { }; + struct nfs4_exception exception = { + .inode = state->inode, + }; int err; do { @@ -4576,7 +4578,9 @@ static int nfs4_lock_reclaim(struct nfs4_state *state, struct file_lock *request static int nfs4_lock_expired(struct nfs4_state *state, struct file_lock *request) { struct nfs_server *server = NFS_SERVER(state->inode); - struct nfs4_exception exception = { }; + struct nfs4_exception exception = { + .inode = state->inode, + }; int err; err = nfs4_set_lock_state(state, request); @@ -4676,6 +4680,7 @@ static int nfs4_proc_setlk(struct nfs4_state *state, int cmd, struct file_lock * { struct nfs4_exception exception = { .state = state, + .inode = state->inode, }; int err; -- cgit v1.2.3-18-g5258 From 55725513b5ef9d462aa3e18527658a0362aaae83 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 18 Apr 2012 12:48:35 -0400 Subject: NFSv4: Ensure that we check lock exclusive/shared type against open modes Since we may be simulating flock() locks using NFS byte range locks, we can't rely on the VFS having checked the file open mode for us. Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org --- fs/nfs/nfs4proc.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 3c787d02131..ba837d977a1 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -4726,6 +4726,20 @@ nfs4_proc_lock(struct file *filp, int cmd, struct file_lock *request) if (state == NULL) return -ENOLCK; + /* + * Don't rely on the VFS having checked the file open mode, + * since it won't do this for flock() locks. + */ + switch (request->fl_type & (F_RDLCK|F_WRLCK|F_UNLCK)) { + case F_RDLCK: + if (!(filp->f_mode & FMODE_READ)) + return -EBADF; + break; + case F_WRLCK: + if (!(filp->f_mode & FMODE_WRITE)) + return -EBADF; + } + do { status = nfs4_proc_setlk(state, cmd, request); if ((status != -EAGAIN) || IS_SETLK(cmd)) -- cgit v1.2.3-18-g5258 From 451146be933e26e21277852b5e40c6a52266ef96 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 18 Apr 2012 16:29:11 -0400 Subject: NFSv4: Fix open(O_TRUNC) and ftruncate() error handling If the file wasn't opened for writing, then truncate and ftruncate need to report the appropriate errors. Reported-by: Miklos Szeredi Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org --- fs/nfs/dir.c | 4 ++-- fs/nfs/nfs4proc.c | 15 ++++++++++++--- 2 files changed, 14 insertions(+), 5 deletions(-) diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index 4aaf0316d76..8789210c690 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1429,7 +1429,7 @@ static struct dentry *nfs_atomic_lookup(struct inode *dir, struct dentry *dentry } open_flags = nd->intent.open.flags; - attr.ia_valid = 0; + attr.ia_valid = ATTR_OPEN; ctx = create_nfs_open_context(dentry, open_flags); res = ERR_CAST(ctx); @@ -1536,7 +1536,7 @@ static int nfs_open_revalidate(struct dentry *dentry, struct nameidata *nd) if (IS_ERR(ctx)) goto out; - attr.ia_valid = 0; + attr.ia_valid = ATTR_OPEN; if (openflags & O_TRUNC) { attr.ia_valid |= ATTR_SIZE; attr.ia_size = 0; diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index ba837d977a1..f875cf30523 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -1954,10 +1954,19 @@ static int nfs4_do_setattr(struct inode *inode, struct rpc_cred *cred, }; int err; do { - err = nfs4_handle_exception(server, - _nfs4_do_setattr(inode, cred, fattr, sattr, state), - &exception); + err = _nfs4_do_setattr(inode, cred, fattr, sattr, state); + switch (err) { + case -NFS4ERR_OPENMODE: + if (state && !(state->state & FMODE_WRITE)) { + err = -EBADF; + if (sattr->ia_valid & ATTR_OPEN) + err = -EACCES; + goto out; + } + } + err = nfs4_handle_exception(server, err, &exception); } while (exception.retry); +out: return err; } -- cgit v1.2.3-18-g5258 From 716af4abd6e6370226f567af50bfaca274515980 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 19 Apr 2012 10:00:19 +0300 Subject: ksz884x: don't copy too much in netdev_set_mac_address() MAX_ADDR_LEN is 32. ETH_ALEN is 6. mac->sa_data is a 14 byte array, so the memcpy() is doing a read past the end of the array. I asked about this on netdev and Ben Hutchings told me it's supposed to be copying ETH_ALEN bytes (thanks Ben). Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/ethernet/micrel/ksz884x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/micrel/ksz884x.c b/drivers/net/ethernet/micrel/ksz884x.c index ef723b185d8..eaf9ff0262a 100644 --- a/drivers/net/ethernet/micrel/ksz884x.c +++ b/drivers/net/ethernet/micrel/ksz884x.c @@ -5675,7 +5675,7 @@ static int netdev_set_mac_address(struct net_device *dev, void *addr) memcpy(hw->override_addr, mac->sa_data, ETH_ALEN); } - memcpy(dev->dev_addr, mac->sa_data, MAX_ADDR_LEN); + memcpy(dev->dev_addr, mac->sa_data, ETH_ALEN); interrupt = hw_block_intr(hw); -- cgit v1.2.3-18-g5258 From 3cd88f993e8b24855ed135b36bc6ed53dff38f08 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 19 Apr 2012 19:35:10 +0100 Subject: Revert "ARM: 7359/2: smp_twd: Only wait for reprogramming on active cpus" This reverts commit 9f85550347f51c79a917b2aec04c90691c11e20a. Peter Zijlstra says: | Argh, how did that ever make it upstream, please drop. | | Russell, please make that go away upstream. | | Like I said, this is both completely the wrong way to solve, and you're | so not paying attention, see: | | 5fbd036b552f633abb394a319f7c62a5c86a9cd7 | 2baab4e90495ebc9826c93f79d74d6e60a828d24 | e3831edd59edf57ca11fc289f08961b20baf5146 | | What's even worse: | | git describe --contains 9f85550347f51c79a917b2aec04c90691c11e20a --match "v*" | v3.4-rc3~1^2~3 | | that nonsense got merged long after those other commits. Linus Walleij says: | My bad, was because the initial patch was submitted march 9th before | these fixes were merged: | http://marc.info/?l=linux-arm-kernel&m=133159655513844&w=2 | | It was pending for a while in Russell's patch tracker and I | rebased it to -rc2 without paying enough attention to recent | related scheduler fixes ... lesson learned. Signed-off-by: Russell King --- arch/arm/kernel/smp_twd.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 5b150afb995..fef42b21cec 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -118,14 +118,10 @@ static int twd_cpufreq_transition(struct notifier_block *nb, * The twd clock events must be reprogrammed to account for the new * frequency. The timer is local to a cpu, so cross-call to the * changing cpu. - * - * Only wait for it to finish, if the cpu is active to avoid - * deadlock when cpu1 is spinning on while(!cpu_active(cpu1)) during - * booting of that cpu. */ if (state == CPUFREQ_POSTCHANGE || state == CPUFREQ_RESUMECHANGE) smp_call_function_single(freqs->cpu, twd_update_frequency, - NULL, cpu_active(freqs->cpu)); + NULL, 1); return NOTIFY_OK; } -- cgit v1.2.3-18-g5258 From 7e5998aa74065d3ab31d17e667f40ffebf4b8425 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 17 Apr 2012 20:53:42 +0000 Subject: bnx2x: off by one in bnx2x_ets_e3b0_sp_pri_to_cos_set() The sp_pri_to_cos[] array size depends on the config but lets say it is BX_E3B0_MAX_NUM_COS_PORT0 and max_num_of_cos is also DCBX_E3B0_MAX_NUM_COS_PORT0. In the original code "pri == max_num_of_cos" was accepted but it is one past the end of the array. Also we used "pri" before capping it. It's a harmless read past the end of the array, but it would affect which error message gets printed. Signed-off-by: Dan Carpenter Acked-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index ad95324dc04..64392ec410a 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -942,6 +942,12 @@ static int bnx2x_ets_e3b0_sp_pri_to_cos_set(const struct link_params *params, const u8 max_num_of_cos = (port) ? DCBX_E3B0_MAX_NUM_COS_PORT1 : DCBX_E3B0_MAX_NUM_COS_PORT0; + if (pri >= max_num_of_cos) { + DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_pri_to_cos_set invalid " + "parameter Illegal strict priority\n"); + return -EINVAL; + } + if (sp_pri_to_cos[pri] != DCBX_INVALID_COS) { DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_pri_to_cos_set invalid " "parameter There can't be two COS's with " @@ -949,12 +955,6 @@ static int bnx2x_ets_e3b0_sp_pri_to_cos_set(const struct link_params *params, return -EINVAL; } - if (pri > max_num_of_cos) { - DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_pri_to_cos_set invalid " - "parameter Illegal strict priority\n"); - return -EINVAL; - } - sp_pri_to_cos[pri] = cos_entry; return 0; -- cgit v1.2.3-18-g5258 From 3bc17d10c9f8ac67eb474737d74894ef2e60d27c Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Tue, 17 Apr 2012 09:38:23 +0000 Subject: net: qmi_wwan: support Sierra Wireless MC77xx devices in QMI mode MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The MC77xx devices can operate in two modes: "Direct IP" or "QMI", switchable using a password protected AT command. Both product ID and USB interface configuration will change when switched. The "sierra_net" driver supports the "Direct IP" mode. This driver supports the "QMI" mode. There are also multiple possible USB interface configurations in each mode, some providing more than one wwan interface. Like many other devices made for Windows, different interface types are identified using a static interface number. We define a Sierra specific interface whitelist to support this. Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 552d24bf862..d316503b35d 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -365,6 +365,27 @@ static const struct driver_info qmi_wwan_force_int4 = { .data = BIT(4), /* interface whitelist bitmap */ }; +/* Sierra Wireless provide equally useless interface descriptors + * Devices in QMI mode can be switched between two different + * configurations: + * a) USB interface #8 is QMI/wwan + * b) USB interfaces #8, #19 and #20 are QMI/wwan + * + * Both configurations provide a number of other interfaces (serial++), + * some of which have the same endpoint configuration as we expect, so + * a whitelist or blacklist is necessary. + * + * FIXME: The below whitelist should include BIT(20). It does not + * because I cannot get it to work... + */ +static const struct driver_info qmi_wwan_sierra = { + .description = "Sierra Wireless wwan/QMI device", + .flags = FLAG_WWAN, + .bind = qmi_wwan_bind_gobi, + .unbind = qmi_wwan_unbind_shared, + .manage_power = qmi_wwan_manage_power, + .data = BIT(8) | BIT(19), /* interface whitelist bitmap */ +}; #define HUAWEI_VENDOR_ID 0x12D1 #define QMI_GOBI_DEVICE(vend, prod) \ @@ -445,6 +466,15 @@ static const struct usb_device_id products[] = { .bInterfaceProtocol = 0xff, .driver_info = (unsigned long)&qmi_wwan_force_int4, }, + { /* Sierra Wireless MC77xx in QMI mode */ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x1199, + .idProduct = 0x68a2, + .bInterfaceClass = 0xff, + .bInterfaceSubClass = 0xff, + .bInterfaceProtocol = 0xff, + .driver_info = (unsigned long)&qmi_wwan_sierra, + }, {QMI_GOBI_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ {QMI_GOBI_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */ {QMI_GOBI_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */ -- cgit v1.2.3-18-g5258 From b9a6a23566960d0dd3f51e2e68b472cd61911078 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 18 Apr 2012 17:31:58 +0200 Subject: tick: Ensure that the broadcast device is initialized Santosh found another trap when we avoid to initialize the broadcast device in the switch_to_oneshot code. The broadcast device might be still in SHUTDOWN state when we actually need to use it. That obviously breaks, as set_next_event() is called on a shutdown device. This did not break on x86, but Suresh analyzed it: From the review, most likely on Sven's system we are force enabling the hpet using the pci quirk's method very late. And in this case, hpet_clockevent (which will be global_clock_event) handler can be null, specifically as this platform might not be using deeper c-states and using the reliable APIC timer. Prior to commit 'fa4da365bc7772c', that handler will be set to 'tick_handle_oneshot_broadcast' when we switch the broadcast timer to oneshot mode, even though we don't use it. Post commit 'fa4da365bc7772c', we stopped switching the broadcast mode to oneshot as this is not really needed and his platform's global_clock_event's handler will remain null. While on my SNB laptop, same is set to 'clockevents_handle_noop' because hpet gets enabled very early. (noop handler on my platform set when the early enabled hpet timer gets replaced by the lapic timer). But the commit 'fa4da365bc7772c' tracked the broadcast timer mode in the SW as oneshot, even though it didn't touch the HW timer. During resume however, tick_resume_broadcast() saw the SW broadcast mode as oneshot and actually programmed the broadcast device also into oneshot mode. So this triggered the null pointer de-reference after the hpet wraps around and depending on what the hpet counter is set to. On the normal platforms where hpet gets enabled early we should be seeing a spurious interrupt (in my SNB laptop I see one spurious interrupt after around 5 minutes ;) which is 32-bit hpet counter wraparound time), but that's a separate issue. Enforce the mode setting when trying to set an event. Reported-and-tested-by: Santosh Shilimkar Signed-off-by: Thomas Gleixner Acked-by: Suresh Siddha Cc: torvalds@linux-foundation.org Cc: svenjoac@gmx.de Cc: rjw@sisk.pl Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1204181723350.2542@ionos --- kernel/time/tick-broadcast.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index 119aca5c684..029531f3818 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -373,6 +373,9 @@ static int tick_broadcast_set_event(ktime_t expires, int force) { struct clock_event_device *bc = tick_broadcast_device.evtdev; + if (bc->mode != CLOCK_EVT_MODE_ONESHOT) + clockevents_set_mode(bc, CLOCK_EVT_MODE_ONESHOT); + return clockevents_program_event(bc, expires, force); } -- cgit v1.2.3-18-g5258 From a6371f80230eaaafd7eef7efeedaa9509bdc982d Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Wed, 18 Apr 2012 19:27:39 -0700 Subject: tick: Fix the spurious broadcast timer ticks after resume During resume, tick_resume_broadcast() programs the broadcast timer in oneshot mode unconditionally. On the platforms where broadcast timer is not really required, this will generate spurious broadcast timer ticks upon resume. For example, on the always running apic timer platforms with HPET, I see spurious hpet tick once every ~5minutes (which is the 32-bit hpet counter wraparound time). Similar to boot time, during resume make the oneshot mode setting of the broadcast clock event device conditional on the state of active broadcast users. Signed-off-by: Suresh Siddha Tested-by: Santosh Shilimkar Tested-by: svenjoac@gmx.de Cc: torvalds@linux-foundation.org Cc: rjw@sisk.pl Link: http://lkml.kernel.org/r/1334802459.28674.209.camel@sbsiddha-desk.sc.intel.com Signed-off-by: Thomas Gleixner --- kernel/time/tick-broadcast.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index 029531f3818..f113755695e 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -346,7 +346,8 @@ int tick_resume_broadcast(void) tick_get_broadcast_mask()); break; case TICKDEV_MODE_ONESHOT: - broadcast = tick_resume_broadcast_oneshot(bc); + if (!cpumask_empty(tick_get_broadcast_mask())) + broadcast = tick_resume_broadcast_oneshot(bc); break; } } -- cgit v1.2.3-18-g5258 From 996f73937cd85031da8dbcd3222a710cb762d428 Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Tue, 17 Apr 2012 21:16:40 +0000 Subject: icplus: fix interrupt for IC+ 101A/G and 1001LF This patch fixes and adds the irq handler for the IC+ 101A/G where we need to read the reg17 to clean the irq. Also remove the flag for the 1001LF where no interrupt can be used for this device. Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/phy/icplus.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c index f08c85acf76..5ac46f5226f 100644 --- a/drivers/net/phy/icplus.c +++ b/drivers/net/phy/icplus.c @@ -40,6 +40,7 @@ MODULE_LICENSE("GPL"); #define IP1001_PHASE_SEL_MASK 3 /* IP1001 RX/TXPHASE_SEL */ #define IP1001_APS_ON 11 /* IP1001 APS Mode bit */ #define IP101A_G_APS_ON 2 /* IP101A/G APS Mode bit */ +#define IP101A_G_IRQ_CONF_STATUS 0x11 /* Conf Info IRQ & Status Reg */ static int ip175c_config_init(struct phy_device *phydev) { @@ -185,6 +186,15 @@ static int ip175c_config_aneg(struct phy_device *phydev) return 0; } +static int ip101a_g_ack_interrupt(struct phy_device *phydev) +{ + int err = phy_read(phydev, IP101A_G_IRQ_CONF_STATUS); + if (err < 0) + return err; + + return 0; +} + static struct phy_driver ip175c_driver = { .phy_id = 0x02430d80, .name = "ICPlus IP175C", @@ -204,7 +214,6 @@ static struct phy_driver ip1001_driver = { .phy_id_mask = 0x0ffffff0, .features = PHY_GBIT_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause, - .flags = PHY_HAS_INTERRUPT, .config_init = &ip1001_config_init, .config_aneg = &genphy_config_aneg, .read_status = &genphy_read_status, @@ -220,6 +229,7 @@ static struct phy_driver ip101a_g_driver = { .features = PHY_BASIC_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause, .flags = PHY_HAS_INTERRUPT, + .ack_interrupt = ip101a_g_ack_interrupt, .config_init = &ip101a_g_config_init, .config_aneg = &genphy_config_aneg, .read_status = &genphy_read_status, -- cgit v1.2.3-18-g5258 From 3adadc08cc1e2cbcc15a640d639297ef5fcb17f5 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 18 Apr 2012 16:11:23 +0000 Subject: net ax25: Reorder ax25_exit to remove races. While reviewing the sysctl code in ax25 I spotted races in ax25_exit where it is possible to receive notifications and packets after already freeing up some of the data structures needed to process those notifications and updates. Call unregister_netdevice_notifier early so that the rest of the cleanup code does not need to deal with network devices. This takes advantage of my recent enhancement to unregister_netdevice_notifier to send unregister notifications of all network devices that are current registered. Move the unregistration for packet types, socket types and protocol types before we cleanup any of the ax25 data structures to remove the possibilities of other races. Signed-off-by: Eric W. Biederman Signed-off-by: David S. Miller --- net/ax25/af_ax25.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c index 0906c194a41..9d9a6a3edbd 100644 --- a/net/ax25/af_ax25.c +++ b/net/ax25/af_ax25.c @@ -2011,16 +2011,17 @@ static void __exit ax25_exit(void) proc_net_remove(&init_net, "ax25_route"); proc_net_remove(&init_net, "ax25"); proc_net_remove(&init_net, "ax25_calls"); - ax25_rt_free(); - ax25_uid_free(); - ax25_dev_free(); - ax25_unregister_sysctl(); unregister_netdevice_notifier(&ax25_dev_notifier); + ax25_unregister_sysctl(); dev_remove_pack(&ax25_packet_type); sock_unregister(PF_AX25); proto_unregister(&ax25_proto); + + ax25_rt_free(); + ax25_uid_free(); + ax25_dev_free(); } module_exit(ax25_exit); -- cgit v1.2.3-18-g5258 From 8a95bc8dfe06982fc2b8a0a2adda7baa2346a17b Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Wed, 30 Nov 2011 10:19:17 -0600 Subject: powerpc/85xx: don't call of_platform_bus_probe() twice Commit 46d026ac ("powerpc/85xx: consolidate of_platform_bus_probe calls") replaced platform-specific of_device_id tables with a single function that probes the most of the busses in 85xx device trees. If a specific platform needed additional busses probed, then it could call of_platform_bus_probe() again. Typically, the additional platform-specific busses are children of existing busses that have already been probed. of_platform_bus_probe() does not handle those child busses automatically. Unfortunately, this doesn't actually work. The second (platform-specific) call to of_platform_bus_probe() never finds any of the busses it's asked to find. To remedy this, the platform-specific of_device_id tables are eliminated, and their entries are merged into mpc85xx_common_ids[], so that all busses are probed at once. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/platforms/85xx/common.c | 6 ++++++ arch/powerpc/platforms/85xx/mpc85xx_mds.c | 11 +---------- arch/powerpc/platforms/85xx/p1022_ds.c | 13 +------------ 3 files changed, 8 insertions(+), 22 deletions(-) diff --git a/arch/powerpc/platforms/85xx/common.c b/arch/powerpc/platforms/85xx/common.c index 9fef5302adc..67dac22b436 100644 --- a/arch/powerpc/platforms/85xx/common.c +++ b/arch/powerpc/platforms/85xx/common.c @@ -21,6 +21,12 @@ static struct of_device_id __initdata mpc85xx_common_ids[] = { { .compatible = "fsl,qe", }, { .compatible = "fsl,cpm2", }, { .compatible = "fsl,srio", }, + /* So that the DMA channel nodes can be probed individually: */ + { .compatible = "fsl,eloplus-dma", }, + /* For the PMC driver */ + { .compatible = "fsl,mpc8548-guts", }, + /* Probably unnecessary? */ + { .compatible = "gpio-leds", }, {}, }; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index 9a6f04406e0..d208ebccb91 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -399,12 +399,6 @@ static int __init board_fixups(void) machine_arch_initcall(mpc8568_mds, board_fixups); machine_arch_initcall(mpc8569_mds, board_fixups); -static struct of_device_id mpc85xx_ids[] = { - { .compatible = "fsl,mpc8548-guts", }, - { .compatible = "gpio-leds", }, - {}, -}; - static int __init mpc85xx_publish_devices(void) { if (machine_is(mpc8568_mds)) @@ -412,10 +406,7 @@ static int __init mpc85xx_publish_devices(void) if (machine_is(mpc8569_mds)) simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio"); - mpc85xx_common_publish_devices(); - of_platform_bus_probe(NULL, mpc85xx_ids, NULL); - - return 0; + return mpc85xx_common_publish_devices(); } machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices); diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c index e74b7cde9ae..f700c81a132 100644 --- a/arch/powerpc/platforms/85xx/p1022_ds.c +++ b/arch/powerpc/platforms/85xx/p1022_ds.c @@ -460,18 +460,7 @@ static void __init p1022_ds_setup_arch(void) pr_info("Freescale P1022 DS reference board\n"); } -static struct of_device_id __initdata p1022_ds_ids[] = { - /* So that the DMA channel nodes can be probed individually: */ - { .compatible = "fsl,eloplus-dma", }, - {}, -}; - -static int __init p1022_ds_publish_devices(void) -{ - mpc85xx_common_publish_devices(); - return of_platform_bus_probe(NULL, p1022_ds_ids, NULL); -} -machine_device_initcall(p1022_ds, p1022_ds_publish_devices); +machine_device_initcall(p1022_ds, mpc85xx_common_publish_devices); machine_arch_initcall(p1022_ds, swiotlb_setup_bus_notifier); -- cgit v1.2.3-18-g5258 From eda713e219c9a7d02b8263ab3fba44092e919b07 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Thu, 19 Apr 2012 09:32:06 +0300 Subject: powerpc: fix build when CONFIG_BOOKE_WDT is enabled Commit ae3a197e (Disintegrate asm/system.h for PowerPC) broke build of assembly files when CONFIG_BOOKE_WDT is enabled as follows: AS arch/powerpc/lib/string.o /home/baruch/git/stable/arch/powerpc/include/asm/reg_booke.h: Assembler messages: /home/baruch/git/stable/arch/powerpc/include/asm/reg_booke.h:19: Error: Unrecognized opcode: `extern' /home/baruch/git/stable/arch/powerpc/include/asm/reg_booke.h:20: Error: Unrecognized opcode: `extern' Since setup_32.c is the only user of the booke_wdt configuration variables, move the declarations there. Cc: David Howells Signed-off-by: Baruch Siach Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/reg_booke.h | 5 ----- arch/powerpc/kernel/setup_32.c | 3 +++ 2 files changed, 3 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index b86faa9107d..8a97aa7289d 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -15,11 +15,6 @@ #ifndef __ASM_POWERPC_REG_BOOKE_H__ #define __ASM_POWERPC_REG_BOOKE_H__ -#ifdef CONFIG_BOOKE_WDT -extern u32 booke_wdt_enabled; -extern u32 booke_wdt_period; -#endif /* CONFIG_BOOKE_WDT */ - /* Machine State Register (MSR) Fields */ #define MSR_GS (1<<28) /* Guest state */ #define MSR_UCLE (1<<26) /* User-mode cache lock enable */ diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 9825f29d1fa..ec8a53fa9e8 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -150,6 +150,9 @@ notrace void __init machine_init(u64 dt_ptr) } #ifdef CONFIG_BOOKE_WDT +extern u32 booke_wdt_enabled; +extern u32 booke_wdt_period; + /* Checks wdt=x and wdt_period=xx command-line option */ notrace int __init early_parse_wdt(char *p) { -- cgit v1.2.3-18-g5258 From bdce27c7f7bc7cf5c3a264bab9de056bd9cb0c9d Mon Sep 17 00:00:00 2001 From: Mingkai Hu Date: Mon, 16 Apr 2012 10:05:05 +0800 Subject: powerpc/mpic_msgr: fix compile error when SMP disabled In file included from arch/powerpc/sysdev/mpic_msgr.c:20:0: ~/arch/powerpc/include/asm/mpic_msgr.h: In function 'mpic_msgr_set_destination': ~/arch/powerpc/include/asm/mpic_msgr.h:117:2: error: implicit declaration of function 'get_hard_smp_processor_id' make[1]: *** [arch/powerpc/sysdev/mpic_msgr.o] Error 1 Signed-off-by: Mingkai Hu Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/mpic_msgr.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/include/asm/mpic_msgr.h b/arch/powerpc/include/asm/mpic_msgr.h index 3ec37dc9003..326d33ca55c 100644 --- a/arch/powerpc/include/asm/mpic_msgr.h +++ b/arch/powerpc/include/asm/mpic_msgr.h @@ -13,6 +13,7 @@ #include #include +#include struct mpic_msgr { u32 __iomem *base; -- cgit v1.2.3-18-g5258 From e0a5a6c38190a5016bcb0f1267324a19b846a35a Mon Sep 17 00:00:00 2001 From: Mingkai Hu Date: Mon, 16 Apr 2012 10:05:06 +0800 Subject: powerpc/mpic_msgr: add lock for MPIC message global variable Also fix issue of accessing invalid msgr pointer issue. The local msgr pointer in fucntion mpic_msgr_get will be accessed before getting a valid address which will cause kernel crash. Signed-off-by: Mingkai Hu Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/mpic_msgr.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/sysdev/mpic_msgr.c b/arch/powerpc/sysdev/mpic_msgr.c index 6e7fa386e76..dc1cfe38007 100644 --- a/arch/powerpc/sysdev/mpic_msgr.c +++ b/arch/powerpc/sysdev/mpic_msgr.c @@ -27,6 +27,7 @@ static struct mpic_msgr **mpic_msgrs; static unsigned int mpic_msgr_count; +static DEFINE_RAW_SPINLOCK(msgrs_lock); static inline void _mpic_msgr_mer_write(struct mpic_msgr *msgr, u32 value) { @@ -56,12 +57,11 @@ struct mpic_msgr *mpic_msgr_get(unsigned int reg_num) if (reg_num >= mpic_msgr_count) return ERR_PTR(-ENODEV); - raw_spin_lock_irqsave(&msgr->lock, flags); - if (mpic_msgrs[reg_num]->in_use == MSGR_FREE) { - msgr = mpic_msgrs[reg_num]; + raw_spin_lock_irqsave(&msgrs_lock, flags); + msgr = mpic_msgrs[reg_num]; + if (msgr->in_use == MSGR_FREE) msgr->in_use = MSGR_INUSE; - } - raw_spin_unlock_irqrestore(&msgr->lock, flags); + raw_spin_unlock_irqrestore(&msgrs_lock, flags); return msgr; } -- cgit v1.2.3-18-g5258 From dea58bd1cab8f6687a784cdacca242b6cac95ede Mon Sep 17 00:00:00 2001 From: Mingkai Hu Date: Mon, 16 Apr 2012 10:05:07 +0800 Subject: powerpc/mpic_msgr: fix offset error when setting mer register Signed-off-by: Mingkai Hu Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/mpic_msgr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/sysdev/mpic_msgr.c b/arch/powerpc/sysdev/mpic_msgr.c index dc1cfe38007..483d8fa72e8 100644 --- a/arch/powerpc/sysdev/mpic_msgr.c +++ b/arch/powerpc/sysdev/mpic_msgr.c @@ -228,7 +228,7 @@ static __devinit int mpic_msgr_probe(struct platform_device *dev) reg_number = block_number * MPIC_MSGR_REGISTERS_PER_BLOCK + i; msgr->base = msgr_block_addr + i * MPIC_MSGR_STRIDE; - msgr->mer = msgr->base + MPIC_MSGR_MER_OFFSET; + msgr->mer = (u32 *)((u8 *)msgr->base + MPIC_MSGR_MER_OFFSET); msgr->in_use = MSGR_FREE; msgr->num = i; raw_spin_lock_init(&msgr->lock); -- cgit v1.2.3-18-g5258 From 4351f30a35b8c6a6b6d4d36e5c2dc8ec0262b2ca Mon Sep 17 00:00:00 2001 From: Mingkai Hu Date: Mon, 16 Apr 2012 10:05:08 +0800 Subject: powerpc/mpc85xx: add MPIC message dts node Signed-off-by: Mingkai Hu Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/fsl/pq3-mpic-message-B.dtsi | 43 +++++++++++++++++++++++ arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi | 10 ++++++ 2 files changed, 53 insertions(+) create mode 100644 arch/powerpc/boot/dts/fsl/pq3-mpic-message-B.dtsi diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic-message-B.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic-message-B.dtsi new file mode 100644 index 00000000000..1cf0b77b1ef --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-mpic-message-B.dtsi @@ -0,0 +1,43 @@ +/* + * PQ3 MPIC Message (Group B) device tree stub [ controller @ offset 0x42400 ] + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +message@42400 { + compatible = "fsl,mpic-v3.1-msgr"; + reg = <0x42400 0x200>; + interrupts = < + 0xb4 2 0 0 + 0xb5 2 0 0 + 0xb6 2 0 0 + 0xb7 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi index fdedf7b1fe0..71c30eb1005 100644 --- a/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi +++ b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi @@ -53,6 +53,16 @@ timer@41100 { 3 0 3 0>; }; +message@41400 { + compatible = "fsl,mpic-v3.1-msgr"; + reg = <0x41400 0x200>; + interrupts = < + 0xb0 2 0 0 + 0xb1 2 0 0 + 0xb2 2 0 0 + 0xb3 2 0 0>; +}; + msi@41600 { compatible = "fsl,mpic-msi"; reg = <0x41600 0x80>; -- cgit v1.2.3-18-g5258 From db4c75cbebd7e5910cd3bcb6790272fcc3042857 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 19 Apr 2012 10:31:47 -0400 Subject: tracing: Fix stacktrace of latency tracers (irqsoff and friends) While debugging a latency with someone on IRC (mirage335) on #linux-rt (OFTC), we discovered that the stacktrace output of the latency tracers (preemptirqsoff) was empty. This bug was caused by the creation of the dynamic length stack trace again (like commit 12b5da3 "tracing: Fix ent_size in trace output" was). This bug is caused by the latency tracers requiring the next event to determine the time between the current event and the next. But by grabbing the next event, the iter->ent_size is set to the next event instead of the current one. As the stacktrace event is the last event, this makes the ent_size zero and causes nothing to be printed for the stack trace. The dynamic stacktrace uses the ent_size to determine how much of the stack can be printed. The ent_size of zero means no stack. The simple fix is to save the iter->ent_size before finding the next event. Note, mirage335 asked to remain anonymous from LKML and git, so I will not add the Reported-by and Tested-by tags, even though he did report the issue and tested the fix. Cc: stable@vger.kernel.org # 3.1+ Signed-off-by: Steven Rostedt --- kernel/trace/trace_output.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c index 859fae6b182..df611a0e76c 100644 --- a/kernel/trace/trace_output.c +++ b/kernel/trace/trace_output.c @@ -652,6 +652,8 @@ int trace_print_lat_context(struct trace_iterator *iter) { u64 next_ts; int ret; + /* trace_find_next_entry will reset ent_size */ + int ent_size = iter->ent_size; struct trace_seq *s = &iter->seq; struct trace_entry *entry = iter->ent, *next_entry = trace_find_next_entry(iter, NULL, @@ -660,6 +662,9 @@ int trace_print_lat_context(struct trace_iterator *iter) unsigned long abs_usecs = ns2usecs(iter->ts - iter->tr->time_start); unsigned long rel_usecs; + /* Restore the original ent_size */ + iter->ent_size = ent_size; + if (!next_entry) next_ts = iter->ts; rel_usecs = ns2usecs(next_ts - iter->ts); -- cgit v1.2.3-18-g5258 From 3af9d8f227a31e25b3110ef175d105798fc147a6 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 13 Apr 2012 17:16:59 -0400 Subject: cifs: fix offset handling in cifs_iovec_write In the recent update of the cifs_iovec_write code to use async writes, the handling of the file position was broken. That patch added a local "offset" variable to handle the offset, and then only updated the original "*poffset" before exiting. Unfortunately, it copied off the original offset from the beginning, instead of doing so after generic_write_checks had been called. Fix this by moving the initialization of "offset" after that in the function. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/file.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/cifs/file.c b/fs/cifs/file.c index fae765dac93..81725e9286e 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -2178,7 +2178,7 @@ cifs_iovec_write(struct file *file, const struct iovec *iov, unsigned long nr_pages, i; size_t copied, len, cur_len; ssize_t total_written = 0; - loff_t offset = *poffset; + loff_t offset; struct iov_iter it; struct cifsFileInfo *open_file; struct cifs_tcon *tcon; @@ -2200,6 +2200,7 @@ cifs_iovec_write(struct file *file, const struct iovec *iov, cifs_sb = CIFS_SB(file->f_path.dentry->d_sb); open_file = file->private_data; tcon = tlink_tcon(open_file->tlink); + offset = *poffset; if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_RWPIDFORWARD) pid = open_file->pid; -- cgit v1.2.3-18-g5258 From a102962ffd45fe8bac68ea6d9f72d3ed19dc44e1 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 31 Mar 2012 17:44:53 +0100 Subject: ARM: ux300: Fix unimplementable regulation constraints It doesn't make sense to grant permission to change the status of a regulator that is also set as always on and similarly it doesn't make sense to allow a driver to change the voltage of a regulator which can only be set to a single voltage. Signed-off-by: Mark Brown Signed-off-by: Linus Walleij --- arch/arm/mach-u300/i2c.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c index a38f80238ea..cb04bd6ab3e 100644 --- a/arch/arm/mach-u300/i2c.c +++ b/arch/arm/mach-u300/i2c.c @@ -146,9 +146,6 @@ static struct ab3100_platform_data ab3100_plf_data = { .min_uV = 1800000, .max_uV = 1800000, .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, .always_on = 1, .boot_on = 1, }, @@ -160,9 +157,6 @@ static struct ab3100_platform_data ab3100_plf_data = { .min_uV = 2500000, .max_uV = 2500000, .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, .always_on = 1, .boot_on = 1, }, @@ -230,8 +224,7 @@ static struct ab3100_platform_data ab3100_plf_data = { .max_uV = 1800000, .valid_modes_mask = REGULATOR_MODE_NORMAL, .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, + REGULATOR_CHANGE_VOLTAGE, .always_on = 1, .boot_on = 1, }, -- cgit v1.2.3-18-g5258 From 1344500e2d79d09db81f748984697cbdd6b02279 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 18 Apr 2012 15:29:58 +0200 Subject: ARM: u300: bump all IRQ numbers by one Since the VIC was converted to use generic IRQ domains IRQ 0 is silently ignored. This IRQ is used on the U300 so we're missing it now. Bump all IRQ numbers by one since they are now decoupled from the hardware IRQ numbers. Cc: Grant Likely Cc: Rob Herring Signed-off-by: Linus Walleij --- arch/arm/mach-u300/core.c | 6 +- arch/arm/mach-u300/include/mach/irqs.h | 150 ++++++++++++++++----------------- 2 files changed, 79 insertions(+), 77 deletions(-) diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 1621ad07d28..33339745d43 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -1667,8 +1667,10 @@ void __init u300_init_irq(void) for (i = 0; i < U300_VIC_IRQS_END; i++) set_bit(i, (unsigned long *) &mask[0]); - vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]); - vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]); + vic_init((void __iomem *) U300_INTCON0_VBASE, IRQ_U300_INTCON0_START, + mask[0], mask[0]); + vic_init((void __iomem *) U300_INTCON1_VBASE, IRQ_U300_INTCON1_START, + mask[1], mask[1]); } diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h index ee78a26707e..ec09c1e07b1 100644 --- a/arch/arm/mach-u300/include/mach/irqs.h +++ b/arch/arm/mach-u300/include/mach/irqs.h @@ -12,101 +12,101 @@ #ifndef __MACH_IRQS_H #define __MACH_IRQS_H -#define IRQ_U300_INTCON0_START 0 -#define IRQ_U300_INTCON1_START 32 +#define IRQ_U300_INTCON0_START 1 +#define IRQ_U300_INTCON1_START 33 /* These are on INTCON0 - 30 lines */ -#define IRQ_U300_IRQ0_EXT 0 -#define IRQ_U300_IRQ1_EXT 1 -#define IRQ_U300_DMA 2 -#define IRQ_U300_VIDEO_ENC_0 3 -#define IRQ_U300_VIDEO_ENC_1 4 -#define IRQ_U300_AAIF_RX 5 -#define IRQ_U300_AAIF_TX 6 -#define IRQ_U300_AAIF_VGPIO 7 -#define IRQ_U300_AAIF_WAKEUP 8 -#define IRQ_U300_PCM_I2S0_FRAME 9 -#define IRQ_U300_PCM_I2S0_FIFO 10 -#define IRQ_U300_PCM_I2S1_FRAME 11 -#define IRQ_U300_PCM_I2S1_FIFO 12 -#define IRQ_U300_XGAM_GAMCON 13 -#define IRQ_U300_XGAM_CDI 14 -#define IRQ_U300_XGAM_CDICON 15 +#define IRQ_U300_IRQ0_EXT 1 +#define IRQ_U300_IRQ1_EXT 2 +#define IRQ_U300_DMA 3 +#define IRQ_U300_VIDEO_ENC_0 4 +#define IRQ_U300_VIDEO_ENC_1 5 +#define IRQ_U300_AAIF_RX 6 +#define IRQ_U300_AAIF_TX 7 +#define IRQ_U300_AAIF_VGPIO 8 +#define IRQ_U300_AAIF_WAKEUP 9 +#define IRQ_U300_PCM_I2S0_FRAME 10 +#define IRQ_U300_PCM_I2S0_FIFO 11 +#define IRQ_U300_PCM_I2S1_FRAME 12 +#define IRQ_U300_PCM_I2S1_FIFO 13 +#define IRQ_U300_XGAM_GAMCON 14 +#define IRQ_U300_XGAM_CDI 15 +#define IRQ_U300_XGAM_CDICON 16 #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) /* MMIACC not used on the DB3210 or DB3350 chips */ -#define IRQ_U300_XGAM_MMIACC 16 +#define IRQ_U300_XGAM_MMIACC 17 #endif -#define IRQ_U300_XGAM_PDI 17 -#define IRQ_U300_XGAM_PDICON 18 -#define IRQ_U300_XGAM_GAMEACC 19 -#define IRQ_U300_XGAM_MCIDCT 20 -#define IRQ_U300_APEX 21 -#define IRQ_U300_UART0 22 -#define IRQ_U300_SPI 23 -#define IRQ_U300_TIMER_APP_OS 24 -#define IRQ_U300_TIMER_APP_DD 25 -#define IRQ_U300_TIMER_APP_GP1 26 -#define IRQ_U300_TIMER_APP_GP2 27 -#define IRQ_U300_TIMER_OS 28 -#define IRQ_U300_TIMER_MS 29 -#define IRQ_U300_KEYPAD_KEYBF 30 -#define IRQ_U300_KEYPAD_KEYBR 31 +#define IRQ_U300_XGAM_PDI 18 +#define IRQ_U300_XGAM_PDICON 19 +#define IRQ_U300_XGAM_GAMEACC 20 +#define IRQ_U300_XGAM_MCIDCT 21 +#define IRQ_U300_APEX 22 +#define IRQ_U300_UART0 23 +#define IRQ_U300_SPI 24 +#define IRQ_U300_TIMER_APP_OS 25 +#define IRQ_U300_TIMER_APP_DD 26 +#define IRQ_U300_TIMER_APP_GP1 27 +#define IRQ_U300_TIMER_APP_GP2 28 +#define IRQ_U300_TIMER_OS 29 +#define IRQ_U300_TIMER_MS 30 +#define IRQ_U300_KEYPAD_KEYBF 31 +#define IRQ_U300_KEYPAD_KEYBR 32 /* These are on INTCON1 - 32 lines */ -#define IRQ_U300_GPIO_PORT0 32 -#define IRQ_U300_GPIO_PORT1 33 -#define IRQ_U300_GPIO_PORT2 34 +#define IRQ_U300_GPIO_PORT0 33 +#define IRQ_U300_GPIO_PORT1 34 +#define IRQ_U300_GPIO_PORT2 35 #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) || \ defined(CONFIG_MACH_U300_BS335) /* These are for DB3150, DB3200 and DB3350 */ -#define IRQ_U300_WDOG 35 -#define IRQ_U300_EVHIST 36 -#define IRQ_U300_MSPRO 37 -#define IRQ_U300_MMCSD_MCIINTR0 38 -#define IRQ_U300_MMCSD_MCIINTR1 39 -#define IRQ_U300_I2C0 40 -#define IRQ_U300_I2C1 41 -#define IRQ_U300_RTC 42 -#define IRQ_U300_NFIF 43 -#define IRQ_U300_NFIF2 44 +#define IRQ_U300_WDOG 36 +#define IRQ_U300_EVHIST 37 +#define IRQ_U300_MSPRO 38 +#define IRQ_U300_MMCSD_MCIINTR0 39 +#define IRQ_U300_MMCSD_MCIINTR1 40 +#define IRQ_U300_I2C0 41 +#define IRQ_U300_I2C1 42 +#define IRQ_U300_RTC 43 +#define IRQ_U300_NFIF 44 +#define IRQ_U300_NFIF2 45 #endif /* DB3150 and DB3200 have only 45 IRQs */ #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) -#define U300_VIC_IRQS_END 45 +#define U300_VIC_IRQS_END 46 #endif /* The DB3350-specific interrupt lines */ #ifdef CONFIG_MACH_U300_BS335 -#define IRQ_U300_ISP_F0 45 -#define IRQ_U300_ISP_F1 46 -#define IRQ_U300_ISP_F2 47 -#define IRQ_U300_ISP_F3 48 -#define IRQ_U300_ISP_F4 49 -#define IRQ_U300_GPIO_PORT3 50 -#define IRQ_U300_SYSCON_PLL_LOCK 51 -#define IRQ_U300_UART1 52 -#define IRQ_U300_GPIO_PORT4 53 -#define IRQ_U300_GPIO_PORT5 54 -#define IRQ_U300_GPIO_PORT6 55 -#define U300_VIC_IRQS_END 56 +#define IRQ_U300_ISP_F0 46 +#define IRQ_U300_ISP_F1 47 +#define IRQ_U300_ISP_F2 48 +#define IRQ_U300_ISP_F3 49 +#define IRQ_U300_ISP_F4 50 +#define IRQ_U300_GPIO_PORT3 51 +#define IRQ_U300_SYSCON_PLL_LOCK 52 +#define IRQ_U300_UART1 53 +#define IRQ_U300_GPIO_PORT4 54 +#define IRQ_U300_GPIO_PORT5 55 +#define IRQ_U300_GPIO_PORT6 56 +#define U300_VIC_IRQS_END 57 #endif /* The DB3210-specific interrupt lines */ #ifdef CONFIG_MACH_U300_BS365 -#define IRQ_U300_GPIO_PORT3 35 -#define IRQ_U300_GPIO_PORT4 36 -#define IRQ_U300_WDOG 37 -#define IRQ_U300_EVHIST 38 -#define IRQ_U300_MSPRO 39 -#define IRQ_U300_MMCSD_MCIINTR0 40 -#define IRQ_U300_MMCSD_MCIINTR1 41 -#define IRQ_U300_I2C0 42 -#define IRQ_U300_I2C1 43 -#define IRQ_U300_RTC 44 -#define IRQ_U300_NFIF 45 -#define IRQ_U300_NFIF2 46 -#define IRQ_U300_SYSCON_PLL_LOCK 47 -#define U300_VIC_IRQS_END 48 +#define IRQ_U300_GPIO_PORT3 36 +#define IRQ_U300_GPIO_PORT4 37 +#define IRQ_U300_WDOG 38 +#define IRQ_U300_EVHIST 39 +#define IRQ_U300_MSPRO 40 +#define IRQ_U300_MMCSD_MCIINTR0 41 +#define IRQ_U300_MMCSD_MCIINTR1 42 +#define IRQ_U300_I2C0 43 +#define IRQ_U300_I2C1 44 +#define IRQ_U300_RTC 45 +#define IRQ_U300_NFIF 46 +#define IRQ_U300_NFIF2 47 +#define IRQ_U300_SYSCON_PLL_LOCK 48 +#define U300_VIC_IRQS_END 49 #endif /* Maximum 8*7 GPIO lines */ @@ -117,6 +117,6 @@ #define IRQ_U300_GPIO_END (U300_VIC_IRQS_END) #endif -#define NR_IRQS (IRQ_U300_GPIO_END) +#define NR_IRQS (IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START) #endif -- cgit v1.2.3-18-g5258 From 5ac57550f279c3d991ef0b398681bcaca18169f7 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Fri, 20 Apr 2012 10:01:46 +0200 Subject: ALSA: HDA: Add external mic quirk for Asus Zenbook UX31E According to the reporter, external mic starts to work if the laptop-dmic model is used. According to BIOS pin config, all pins are consistent with the alc269vb_laptop_dmic fixup, except for the external mic, which is not present. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/950490 Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index e65e3543305..818f90bc7d5 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6109,6 +6109,7 @@ static const struct alc_fixup alc269_fixups[] = { static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x1586, "HP", ALC269_FIXUP_MIC2_MUTE_LED), + SND_PCI_QUIRK(0x1043, 0x1427, "Asus Zenbook UX31E", ALC269VB_FIXUP_DMIC), SND_PCI_QUIRK(0x1043, 0x1a13, "Asus G73Jw", ALC269_FIXUP_ASUS_G73JW), SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_FIXUP_STEREO_DMIC), SND_PCI_QUIRK(0x1043, 0x831a, "ASUS P901", ALC269_FIXUP_STEREO_DMIC), -- cgit v1.2.3-18-g5258 From 60f2951e3ad9b833bc12e2ea7652be2611771792 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Fri, 20 Apr 2012 15:28:07 +0530 Subject: dmaengine: imx-dma: dont complete descriptor for cyclic dma the cookie updates completed the cyclic dma descriptor wrongly. This caused the BUG_ON to be hit as submit is called for completed descriptor Fix this by not marking the cyclic descriptor as complete Tested-by: Javier Martin Signed-off-by: Vinod Koul --- drivers/dma/imx-dma.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c index a45b5d2a598..bb787d8e152 100644 --- a/drivers/dma/imx-dma.c +++ b/drivers/dma/imx-dma.c @@ -571,11 +571,14 @@ static void imxdma_tasklet(unsigned long data) if (desc->desc.callback) desc->desc.callback(desc->desc.callback_param); - dma_cookie_complete(&desc->desc); - - /* If we are dealing with a cyclic descriptor keep it on ld_active */ + /* If we are dealing with a cyclic descriptor keep it on ld_active + * and dont mark the descripor as complete. + * Only in non-cyclic cases it would be marked as complete + */ if (imxdma_chan_is_doing_cyclic(imxdmac)) goto out; + else + dma_cookie_complete(&desc->desc); /* Free 2D slot if it was an interleaved transfer */ if (imxdmac->enabled_2d) { -- cgit v1.2.3-18-g5258 From d04525ed0323709711277563a2c76e446a017423 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 11 Apr 2012 13:29:31 +0800 Subject: dma: mxs-dma: enable channel in device_issue_pending call Enable channel in device_issue_pending call, so that the order between cookie assignment and channel enabling can be ensured naturally. It fixes the mxs gpmi-nand breakage which is caused by the incorrect order of cookie assigning and channel enabling. Suggested-by: Russell King Signed-off-by: Shawn Guo Tested-by: Huang Shijie Tested-by Signed-off-by: Vinod Koul --- drivers/dma/mxs-dma.c | 10 +++------- drivers/mmc/host/mxs-mmc.c | 3 +++ drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 1 + 3 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c index c81ef7e10e0..655d4ce6ed0 100644 --- a/drivers/dma/mxs-dma.c +++ b/drivers/dma/mxs-dma.c @@ -201,10 +201,6 @@ static struct mxs_dma_chan *to_mxs_dma_chan(struct dma_chan *chan) static dma_cookie_t mxs_dma_tx_submit(struct dma_async_tx_descriptor *tx) { - struct mxs_dma_chan *mxs_chan = to_mxs_dma_chan(tx->chan); - - mxs_dma_enable_chan(mxs_chan); - return dma_cookie_assign(tx); } @@ -558,9 +554,9 @@ static enum dma_status mxs_dma_tx_status(struct dma_chan *chan, static void mxs_dma_issue_pending(struct dma_chan *chan) { - /* - * Nothing to do. We only have a single descriptor. - */ + struct mxs_dma_chan *mxs_chan = to_mxs_dma_chan(chan); + + mxs_dma_enable_chan(mxs_chan); } static int __init mxs_dma_init(struct mxs_dma_engine *mxs_dma) diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c index b0f2ef98818..e3f5af96ab8 100644 --- a/drivers/mmc/host/mxs-mmc.c +++ b/drivers/mmc/host/mxs-mmc.c @@ -363,6 +363,7 @@ static void mxs_mmc_bc(struct mxs_mmc_host *host) goto out; dmaengine_submit(desc); + dma_async_issue_pending(host->dmach); return; out: @@ -403,6 +404,7 @@ static void mxs_mmc_ac(struct mxs_mmc_host *host) goto out; dmaengine_submit(desc); + dma_async_issue_pending(host->dmach); return; out: @@ -531,6 +533,7 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host) goto out; dmaengine_submit(desc); + dma_async_issue_pending(host->dmach); return; out: dev_warn(mmc_dev(host->mmc), diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index 75b1dde1635..9ec51cec2e1 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -266,6 +266,7 @@ int start_dma_without_bch_irq(struct gpmi_nand_data *this, desc->callback = dma_irq_callback; desc->callback_param = this; dmaengine_submit(desc); + dma_async_issue_pending(get_dma_chan(this)); /* Wait for the interrupt from the DMA block. */ err = wait_for_completion_timeout(dma_c, msecs_to_jiffies(1000)); -- cgit v1.2.3-18-g5258 From ed8b0d67f33518a16c6b2450fe5ebebf180c2d04 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Mon, 16 Apr 2012 14:46:30 +0200 Subject: dmaengine: at_hdmac: remove clear-on-read in atc_dostart() This loop on EBCISR register was designed to clear IRQ sources before enabling a DMA channel. This register is clear-on-read so a race condition can appear if another channel is already active and has just finished its transfer. Removing this read on EBCISR is fixing the issue as there is no case where an IRQ could be pending: we already make sure that this register is drained at probe() time and during resume. Signed-off-by: Nicolas Ferre Cc: stable Signed-off-by: Vinod Koul --- drivers/dma/at_hdmac.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 7aa58d20489..445fdf81169 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -221,10 +221,6 @@ static void atc_dostart(struct at_dma_chan *atchan, struct at_desc *first) vdbg_dump_regs(atchan); - /* clear any pending interrupt */ - while (dma_readl(atdma, EBCISR)) - cpu_relax(); - channel_writel(atchan, SADDR, 0); channel_writel(atchan, DADDR, 0); channel_writel(atchan, CTRLA, 0); -- cgit v1.2.3-18-g5258 From 33ff581eddf744ea91a50d46c2f0961b375a9595 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Wed, 18 Apr 2012 15:46:58 +0200 Subject: perf symbols: Read plt symbols from proper symtab_type binary When loading symbols from DSO we check multiple paths of DSO binary until we succeed to load symbols ('.symtab' section). Once symbols are read we try to load also plt symbols. During the reading of plt symbols, the dso file is reopened from location given by dso->long_name. This could be wrong in case we want process buildid binaries. The change is to make the plt symbols being read from the DSO path, that normal symbols were read from. Signed-off-by: Jiri Olsa Cc: Corey Ashford Cc: Frederic Weisbecker Cc: Ingo Molnar Cc: Paul Mackerras Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1334756818-6631-1-git-send-email-jolsa@redhat.com [ committer note: moved dso to be the first parameter of that function ] Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/symbol.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c index c0a028c3eba..ab9867b2b43 100644 --- a/tools/perf/util/symbol.c +++ b/tools/perf/util/symbol.c @@ -977,8 +977,9 @@ static Elf_Scn *elf_section_by_name(Elf *elf, GElf_Ehdr *ep, * And always look at the original dso, not at debuginfo packages, that * have the PLT data stripped out (shdr_rel_plt.sh_type == SHT_NOBITS). */ -static int dso__synthesize_plt_symbols(struct dso *dso, struct map *map, - symbol_filter_t filter) +static int +dso__synthesize_plt_symbols(struct dso *dso, char *name, struct map *map, + symbol_filter_t filter) { uint32_t nr_rel_entries, idx; GElf_Sym sym; @@ -993,10 +994,7 @@ static int dso__synthesize_plt_symbols(struct dso *dso, struct map *map, char sympltname[1024]; Elf *elf; int nr = 0, symidx, fd, err = 0; - char name[PATH_MAX]; - snprintf(name, sizeof(name), "%s%s", - symbol_conf.symfs, dso->long_name); fd = open(name, O_RDONLY); if (fd < 0) goto out; @@ -1703,8 +1701,9 @@ restart: continue; if (ret > 0) { - int nr_plt = dso__synthesize_plt_symbols(dso, map, - filter); + int nr_plt; + + nr_plt = dso__synthesize_plt_symbols(dso, name, map, filter); if (nr_plt > 0) ret += nr_plt; break; -- cgit v1.2.3-18-g5258 From 73fb7bc7c57d971b11f2e00536ac2d3e316e0609 Mon Sep 17 00:00:00 2001 From: Fred Isaman Date: Fri, 20 Apr 2012 14:47:34 -0400 Subject: NFS: put open context on error in nfs_pagein_multi Cc: Signed-off-by: Fred Isaman Signed-off-by: Trond Myklebust --- fs/nfs/read.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/read.c b/fs/nfs/read.c index 9a0e8ef4a40..0a4be28c2ea 100644 --- a/fs/nfs/read.c +++ b/fs/nfs/read.c @@ -322,7 +322,7 @@ out_bad: while (!list_empty(res)) { data = list_entry(res->next, struct nfs_read_data, list); list_del(&data->list); - nfs_readdata_free(data); + nfs_readdata_release(data); } nfs_readpage_release(req); return -ENOMEM; -- cgit v1.2.3-18-g5258 From 8ccd271f7a3a846ce6f85ead0760d9d12994a611 Mon Sep 17 00:00:00 2001 From: Fred Isaman Date: Fri, 20 Apr 2012 14:47:35 -0400 Subject: NFS: put open context on error in nfs_flush_multi Cc: Signed-off-by: Fred Isaman Signed-off-by: Trond Myklebust --- fs/nfs/write.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/write.c b/fs/nfs/write.c index 9b8d4d42a8a..c07462320f6 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -1019,7 +1019,7 @@ out_bad: while (!list_empty(res)) { data = list_entry(res->next, struct nfs_write_data, list); list_del(&data->list); - nfs_writedata_free(data); + nfs_writedata_release(data); } nfs_redirty_request(req); return -ENOMEM; -- cgit v1.2.3-18-g5258 From 98a2139f4f4d7b5fcc3a54c7fddbe88612abed20 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Sat, 3 Sep 2011 01:09:43 +0200 Subject: nfs: Enclose hostname in brackets when needed in nfs_do_root_mount When hostname contains colon (e.g. when it is an IPv6 address) it needs to be enclosed in brackets to make parsing of NFS device string possible. Fix nfs_do_root_mount() to enclose hostname properly when needed. NFS code actually does not need this as it does not parse the string passed by nfs_do_root_mount() but the device string is exposed to userspace in /proc/mounts. CC: Josh Boyer CC: Trond Myklebust Signed-off-by: Jan Kara Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust --- fs/nfs/super.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/fs/nfs/super.c b/fs/nfs/super.c index 37412f706b3..1e6715f0616 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -2767,11 +2767,15 @@ static struct vfsmount *nfs_do_root_mount(struct file_system_type *fs_type, char *root_devname; size_t len; - len = strlen(hostname) + 3; + len = strlen(hostname) + 5; root_devname = kmalloc(len, GFP_KERNEL); if (root_devname == NULL) return ERR_PTR(-ENOMEM); - snprintf(root_devname, len, "%s:/", hostname); + /* Does hostname needs to be enclosed in brackets? */ + if (strchr(hostname, ':')) + snprintf(root_devname, len, "[%s]:/", hostname); + else + snprintf(root_devname, len, "%s:/", hostname); root_mnt = vfs_kern_mount(fs_type, flags, root_devname, data); kfree(root_devname); return root_mnt; -- cgit v1.2.3-18-g5258 From 8482c81c770960d7c0dc991a781cbd4afa7ea4cc Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Sat, 14 Apr 2012 08:04:46 -0700 Subject: ARM: EXYNOS: use 'exynos4-sdhci' as device name for sdhci controllers With the addition of platform specific driver data in the sdhci driver for EXYNOS4 and EXYNOS5, the device name of sdhci controllers on EXYNOS4 and EXYNOS5 are changed accordingly. Signed-off-by: Thomas Abraham [kgene.kim@samsung.com: re-worked on top of v3.4-rc2] Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/clock-exynos4.c | 24 ++++++++++++------------ arch/arm/mach-exynos/clock-exynos5.c | 24 ++++++++++++------------ arch/arm/mach-exynos/common.c | 10 ++++++++++ arch/arm/plat-samsung/include/plat/sdhci.h | 28 ++++++++++++++++++++++++++++ 4 files changed, 62 insertions(+), 24 deletions(-) diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c index df54c2a9222..6efd1e5919f 100644 --- a/arch/arm/mach-exynos/clock-exynos4.c +++ b/arch/arm/mach-exynos/clock-exynos4.c @@ -497,25 +497,25 @@ static struct clk exynos4_init_clocks_off[] = { .ctrlbit = (1 << 3), }, { .name = "hsmmc", - .devname = "s3c-sdhci.0", + .devname = "exynos4-sdhci.0", .parent = &exynos4_clk_aclk_133.clk, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 5), }, { .name = "hsmmc", - .devname = "s3c-sdhci.1", + .devname = "exynos4-sdhci.1", .parent = &exynos4_clk_aclk_133.clk, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 6), }, { .name = "hsmmc", - .devname = "s3c-sdhci.2", + .devname = "exynos4-sdhci.2", .parent = &exynos4_clk_aclk_133.clk, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 7), }, { .name = "hsmmc", - .devname = "s3c-sdhci.3", + .devname = "exynos4-sdhci.3", .parent = &exynos4_clk_aclk_133.clk, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 8), @@ -1202,7 +1202,7 @@ static struct clksrc_clk exynos4_clk_sclk_uart3 = { static struct clksrc_clk exynos4_clk_sclk_mmc0 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.0", + .devname = "exynos4-sdhci.0", .parent = &exynos4_clk_dout_mmc0.clk, .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 0), @@ -1213,7 +1213,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc0 = { static struct clksrc_clk exynos4_clk_sclk_mmc1 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.1", + .devname = "exynos4-sdhci.1", .parent = &exynos4_clk_dout_mmc1.clk, .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 4), @@ -1224,7 +1224,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc1 = { static struct clksrc_clk exynos4_clk_sclk_mmc2 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.2", + .devname = "exynos4-sdhci.2", .parent = &exynos4_clk_dout_mmc2.clk, .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 8), @@ -1235,7 +1235,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc2 = { static struct clksrc_clk exynos4_clk_sclk_mmc3 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.3", + .devname = "exynos4-sdhci.3", .parent = &exynos4_clk_dout_mmc3.clk, .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 12), @@ -1340,10 +1340,10 @@ static struct clk_lookup exynos4_clk_lookup[] = { CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos4_clk_sclk_uart1.clk), CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos4_clk_sclk_uart2.clk), CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos4_clk_sclk_uart3.clk), - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk), - CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk), - CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk), + CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk), + CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk), + CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk), + CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk), CLKDEV_INIT("exynos4-fb.0", "lcd", &exynos4_clk_fimd0), CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos4_clk_pdma0), CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos4_clk_pdma1), diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c index d013982d0f8..5cd7a8b8868 100644 --- a/arch/arm/mach-exynos/clock-exynos5.c +++ b/arch/arm/mach-exynos/clock-exynos5.c @@ -455,25 +455,25 @@ static struct clk exynos5_init_clocks_off[] = { .ctrlbit = (1 << 20), }, { .name = "hsmmc", - .devname = "s3c-sdhci.0", + .devname = "exynos4-sdhci.0", .parent = &exynos5_clk_aclk_200.clk, .enable = exynos5_clk_ip_fsys_ctrl, .ctrlbit = (1 << 12), }, { .name = "hsmmc", - .devname = "s3c-sdhci.1", + .devname = "exynos4-sdhci.1", .parent = &exynos5_clk_aclk_200.clk, .enable = exynos5_clk_ip_fsys_ctrl, .ctrlbit = (1 << 13), }, { .name = "hsmmc", - .devname = "s3c-sdhci.2", + .devname = "exynos4-sdhci.2", .parent = &exynos5_clk_aclk_200.clk, .enable = exynos5_clk_ip_fsys_ctrl, .ctrlbit = (1 << 14), }, { .name = "hsmmc", - .devname = "s3c-sdhci.3", + .devname = "exynos4-sdhci.3", .parent = &exynos5_clk_aclk_200.clk, .enable = exynos5_clk_ip_fsys_ctrl, .ctrlbit = (1 << 15), @@ -813,7 +813,7 @@ static struct clksrc_clk exynos5_clk_sclk_uart3 = { static struct clksrc_clk exynos5_clk_sclk_mmc0 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.0", + .devname = "exynos4-sdhci.0", .parent = &exynos5_clk_dout_mmc0.clk, .enable = exynos5_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 0), @@ -824,7 +824,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc0 = { static struct clksrc_clk exynos5_clk_sclk_mmc1 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.1", + .devname = "exynos4-sdhci.1", .parent = &exynos5_clk_dout_mmc1.clk, .enable = exynos5_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 4), @@ -835,7 +835,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc1 = { static struct clksrc_clk exynos5_clk_sclk_mmc2 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.2", + .devname = "exynos4-sdhci.2", .parent = &exynos5_clk_dout_mmc2.clk, .enable = exynos5_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 8), @@ -846,7 +846,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc2 = { static struct clksrc_clk exynos5_clk_sclk_mmc3 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.3", + .devname = "exynos4-sdhci.3", .parent = &exynos5_clk_dout_mmc3.clk, .enable = exynos5_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 12), @@ -990,10 +990,10 @@ static struct clk_lookup exynos5_clk_lookup[] = { CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos5_clk_sclk_uart1.clk), CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos5_clk_sclk_uart2.clk), CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos5_clk_sclk_uart3.clk), - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk), - CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk), - CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk), + CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk), + CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk), + CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk), + CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk), CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0), CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1), CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1), diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 8614aab47cc..b5e7f00da58 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -326,6 +326,11 @@ static void __init exynos4_map_io(void) s3c_fimc_setname(2, "exynos4-fimc"); s3c_fimc_setname(3, "exynos4-fimc"); + s3c_sdhci_setname(0, "exynos4-sdhci"); + s3c_sdhci_setname(1, "exynos4-sdhci"); + s3c_sdhci_setname(2, "exynos4-sdhci"); + s3c_sdhci_setname(3, "exynos4-sdhci"); + /* The I2C bus controllers are directly compatible with s3c2440 */ s3c_i2c0_setname("s3c2440-i2c"); s3c_i2c1_setname("s3c2440-i2c"); @@ -344,6 +349,11 @@ static void __init exynos5_map_io(void) s3c_device_i2c0.resource[1].start = EXYNOS5_IRQ_IIC; s3c_device_i2c0.resource[1].end = EXYNOS5_IRQ_IIC; + s3c_sdhci_setname(0, "exynos4-sdhci"); + s3c_sdhci_setname(1, "exynos4-sdhci"); + s3c_sdhci_setname(2, "exynos4-sdhci"); + s3c_sdhci_setname(3, "exynos4-sdhci"); + /* The I2C bus controllers are directly compatible with s3c2440 */ s3c_i2c0_setname("s3c2440-i2c"); s3c_i2c1_setname("s3c2440-i2c"); diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index 317e246ffc5..e834c5ef437 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -18,6 +18,8 @@ #ifndef __PLAT_S3C_SDHCI_H #define __PLAT_S3C_SDHCI_H __FILE__ +#include + struct platform_device; struct mmc_host; struct mmc_card; @@ -356,4 +358,30 @@ static inline void exynos4_default_sdhci3(void) { } #endif /* CONFIG_EXYNOS4_SETUP_SDHCI */ +static inline void s3c_sdhci_setname(int id, char *name) +{ + switch (id) { +#ifdef CONFIG_S3C_DEV_HSMMC + case 0: + s3c_device_hsmmc0.name = name; + break; +#endif +#ifdef CONFIG_S3C_DEV_HSMMC1 + case 1: + s3c_device_hsmmc1.name = name; + break; +#endif +#ifdef CONFIG_S3C_DEV_HSMMC2 + case 2: + s3c_device_hsmmc2.name = name; + break; +#endif +#ifdef CONFIG_S3C_DEV_HSMMC3 + case 3: + s3c_device_hsmmc3.name = name; + break; +#endif + } +} + #endif /* __PLAT_S3C_SDHCI_H */ -- cgit v1.2.3-18-g5258 From 5699b0ca05f781d496d20ba87f916bd9eec7ea6a Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Fri, 20 Apr 2012 17:26:23 -0700 Subject: ARM: EXYNOS: Fix incorrect initialization of GIC Use the of_irq_init() call to setup the gic which also properly registers the gic device node pointer with gic irq domain, without which all interrupt specifier translations for gic fail. Signed-off-by: Thomas Abraham Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index b5e7f00da58..6c0e4f54c94 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -547,7 +547,7 @@ void __init exynos5_init_irq(void) { int irq; - gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU); + of_irq_init(exynos4_dt_irq_match); for (irq = 0; irq < EXYNOS5_MAX_COMBINER_NR; irq++) { combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq), -- cgit v1.2.3-18-g5258 From 95b72eb0bdef6476b7e73061f0382adf46c5495a Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 20 Apr 2012 19:24:51 -0400 Subject: NFSv4: Ensure we do not reuse open owner names The NFSv4 spec is ambiguous about whether or not it is permissible to reuse open owner names, so play it safe. This patch adds a timestamp to the state_owner structure, and combines that with the IDA based uniquifier. Fixes a regression whereby the Linux server returns NFS4ERR_BAD_SEQID. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4_fs.h | 1 + fs/nfs/nfs4proc.c | 6 +++--- fs/nfs/nfs4state.c | 1 + fs/nfs/nfs4xdr.c | 9 +++++---- include/linux/nfs_xdr.h | 7 ++++++- 5 files changed, 16 insertions(+), 8 deletions(-) diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h index 97ecc863dd7..b6db9e33fb7 100644 --- a/fs/nfs/nfs4_fs.h +++ b/fs/nfs/nfs4_fs.h @@ -59,6 +59,7 @@ struct nfs_unique_id { #define NFS_SEQID_CONFIRMED 1 struct nfs_seqid_counter { + ktime_t create_time; int owner_id; int flags; u32 counter; diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index f875cf30523..60d5f4c26dd 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -838,7 +838,8 @@ static struct nfs4_opendata *nfs4_opendata_alloc(struct dentry *dentry, p->o_arg.open_flags = flags; p->o_arg.fmode = fmode & (FMODE_READ|FMODE_WRITE); p->o_arg.clientid = server->nfs_client->cl_clientid; - p->o_arg.id = sp->so_seqid.owner_id; + p->o_arg.id.create_time = ktime_to_ns(sp->so_seqid.create_time); + p->o_arg.id.uniquifier = sp->so_seqid.owner_id; p->o_arg.name = &dentry->d_name; p->o_arg.server = server; p->o_arg.bitmask = server->attr_bitmask; @@ -1466,8 +1467,7 @@ static void nfs4_open_prepare(struct rpc_task *task, void *calldata) goto unlock_no_action; rcu_read_unlock(); } - /* Update sequence id. */ - data->o_arg.id = sp->so_seqid.owner_id; + /* Update client id. */ data->o_arg.clientid = sp->so_server->nfs_client->cl_clientid; if (data->o_arg.claim == NFS4_OPEN_CLAIM_PREVIOUS) { task->tk_msg.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_OPEN_NOATTR]; diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index 0f43414eb25..3b07f094f3a 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -393,6 +393,7 @@ nfs4_remove_state_owner_locked(struct nfs4_state_owner *sp) static void nfs4_init_seqid_counter(struct nfs_seqid_counter *sc) { + sc->create_time = ktime_get(); sc->flags = 0; sc->counter = 0; spin_lock_init(&sc->lock); diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index c74fdb114b4..77fc5f959c4 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -74,7 +74,7 @@ static int nfs4_stat_to_errno(int); /* lock,open owner id: * we currently use size 2 (u64) out of (NFS4_OPAQUE_LIMIT >> 2) */ -#define open_owner_id_maxsz (1 + 1 + 4) +#define open_owner_id_maxsz (1 + 2 + 1 + 1 + 2) #define lock_owner_id_maxsz (1 + 1 + 4) #define decode_lockowner_maxsz (1 + XDR_QUADLEN(IDMAP_NAMESZ)) #define compound_encode_hdr_maxsz (3 + (NFS4_MAXTAGLEN >> 2)) @@ -1340,12 +1340,13 @@ static inline void encode_openhdr(struct xdr_stream *xdr, const struct nfs_opena */ encode_nfs4_seqid(xdr, arg->seqid); encode_share_access(xdr, arg->fmode); - p = reserve_space(xdr, 32); + p = reserve_space(xdr, 36); p = xdr_encode_hyper(p, arg->clientid); - *p++ = cpu_to_be32(20); + *p++ = cpu_to_be32(24); p = xdr_encode_opaque_fixed(p, "open id:", 8); *p++ = cpu_to_be32(arg->server->s_dev); - xdr_encode_hyper(p, arg->id); + *p++ = cpu_to_be32(arg->id.uniquifier); + xdr_encode_hyper(p, arg->id.create_time); } static inline void encode_createmode(struct xdr_stream *xdr, const struct nfs_openargs *arg) diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index bfd0d1bf670..7ba3551a041 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -312,6 +312,11 @@ struct nfs4_layoutreturn { int rpc_status; }; +struct stateowner_id { + __u64 create_time; + __u32 uniquifier; +}; + /* * Arguments to the open call. */ @@ -321,7 +326,7 @@ struct nfs_openargs { int open_flags; fmode_t fmode; __u64 clientid; - __u64 id; + struct stateowner_id id; union { struct { struct iattr * attrs; /* UNCHECKED, GUARDED */ -- cgit v1.2.3-18-g5258 From c77365c963cf8703ecf1004cd3b298068a3e1b76 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sat, 21 Apr 2012 12:31:05 -0400 Subject: NFSv4: Ensure that we don't drop a state owner more than once Retest the RB_EMPTY_NODE() condition under the spin lock to ensure that we don't call rb_erase() more than once on the same state owner. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4state.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index 3b07f094f3a..b300fb840b2 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -435,13 +435,17 @@ nfs4_alloc_state_owner(struct nfs_server *server, static void nfs4_drop_state_owner(struct nfs4_state_owner *sp) { - if (!RB_EMPTY_NODE(&sp->so_server_node)) { + struct rb_node *rb_node = &sp->so_server_node; + + if (!RB_EMPTY_NODE(rb_node)) { struct nfs_server *server = sp->so_server; struct nfs_client *clp = server->nfs_client; spin_lock(&clp->cl_lock); - rb_erase(&sp->so_server_node, &server->state_owners); - RB_CLEAR_NODE(&sp->so_server_node); + if (!RB_EMPTY_NODE(rb_node)) { + rb_erase(rb_node, &server->state_owners); + RB_CLEAR_NODE(rb_node); + } spin_unlock(&clp->cl_lock); } } -- cgit v1.2.3-18-g5258 From 7bf97bc27308cfdc7a8dadd40ae50f7c4cb09b01 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sat, 21 Apr 2012 12:36:19 -0400 Subject: NFSv4: Keep dropped state owners on the LRU list for a while To ensure that we don't reuse their identifiers. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4state.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index b300fb840b2..7f0fcfc1fe9 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -521,6 +521,14 @@ out: /** * nfs4_put_state_owner - Release a nfs4_state_owner * @sp: state owner data to release + * + * Note that we keep released state owners on an LRU + * list. + * This caches valid state owners so that they can be + * reused, to avoid the OPEN_CONFIRM on minor version 0. + * It also pins the uniquifier of dropped state owners for + * a while, to ensure that those state owner names are + * never reused. */ void nfs4_put_state_owner(struct nfs4_state_owner *sp) { @@ -530,15 +538,9 @@ void nfs4_put_state_owner(struct nfs4_state_owner *sp) if (!atomic_dec_and_lock(&sp->so_count, &clp->cl_lock)) return; - if (!RB_EMPTY_NODE(&sp->so_server_node)) { - sp->so_expires = jiffies; - list_add_tail(&sp->so_lru, &server->state_owners_lru); - spin_unlock(&clp->cl_lock); - } else { - nfs4_remove_state_owner_locked(sp); - spin_unlock(&clp->cl_lock); - nfs4_free_state_owner(sp); - } + sp->so_expires = jiffies; + list_add_tail(&sp->so_lru, &server->state_owners_lru); + spin_unlock(&clp->cl_lock); } /** -- cgit v1.2.3-18-g5258 From c5a99937a9cf74a623384023201a7d98b51e7e3b Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 18 Apr 2012 17:25:58 +0000 Subject: ks8851: Fix mutex deadlock in ks8851_net_stop() There is a potential deadlock scenario when the ks8851 driver is removed. The interrupt handler schedules a workqueue which acquires a mutex that ks8851_net_stop() also acquires before flushing the workqueue. Previously lockdep wouldn't be able to find this problem but now that it has the support we can trigger this lockdep warning by rmmoding the driver after an ifconfig up. Fix the possible deadlock by disabling the interrupts in the chip and then release the lock across the workqueue flushing. The mutex is only there to proect the registers anyway so this should be ok. ======================================================= [ INFO: possible circular locking dependency detected ] 3.0.21-00021-g8b33780-dirty #2911 ------------------------------------------------------- rmmod/125 is trying to acquire lock: ((&ks->irq_work)){+.+...}, at: [] flush_work+0x0/0xac but task is already holding lock: (&ks->lock){+.+...}, at: [] ks8851_net_stop+0x64/0x138 [ks8851] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&ks->lock){+.+...}: [] __lock_acquire+0x940/0x9f8 [] lock_acquire+0x10c/0x130 [] mutex_lock_nested+0x68/0x3dc [] ks8851_irq_work+0x24/0x46c [ks8851] [] process_one_work+0x2d8/0x518 [] worker_thread+0x220/0x3a0 [] kthread+0x88/0x94 [] kernel_thread_exit+0x0/0x8 -> #0 ((&ks->irq_work)){+.+...}: [] validate_chain+0x914/0x1018 [] __lock_acquire+0x940/0x9f8 [] lock_acquire+0x10c/0x130 [] flush_work+0x4c/0xac [] ks8851_net_stop+0x6c/0x138 [ks8851] [] __dev_close_many+0x98/0xcc [] dev_close_many+0x68/0xd0 [] rollback_registered_many+0xcc/0x2b8 [] rollback_registered+0x28/0x34 [] unregister_netdevice_queue+0x58/0x7c [] unregister_netdev+0x18/0x20 [] ks8851_remove+0x64/0xb4 [ks8851] [] spi_drv_remove+0x18/0x1c [] __device_release_driver+0x7c/0xbc [] driver_detach+0x8c/0xb4 [] bus_remove_driver+0xb8/0xe8 [] sys_delete_module+0x1e8/0x27c [] ret_fast_syscall+0x0/0x3c other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ks->lock); lock((&ks->irq_work)); lock(&ks->lock); lock((&ks->irq_work)); *** DEADLOCK *** 4 locks held by rmmod/125: #0: (&__lockdep_no_validate__){+.+.+.}, at: [] driver_detach+0x6c/0xb4 #1: (&__lockdep_no_validate__){+.+.+.}, at: [] driver_detach+0x78/0xb4 #2: (rtnl_mutex){+.+.+.}, at: [] unregister_netdev+0xc/0x20 #3: (&ks->lock){+.+...}, at: [] ks8851_net_stop+0x64/0x138 [ks8851] Cc: Ben Dooks Signed-off-by: Stephen Boyd Signed-off-by: David S. Miller --- drivers/net/ethernet/micrel/ks8851.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/micrel/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c index e5dc0757f07..ad10759e345 100644 --- a/drivers/net/ethernet/micrel/ks8851.c +++ b/drivers/net/ethernet/micrel/ks8851.c @@ -889,16 +889,17 @@ static int ks8851_net_stop(struct net_device *dev) netif_stop_queue(dev); mutex_lock(&ks->lock); + /* turn off the IRQs and ack any outstanding */ + ks8851_wrreg16(ks, KS_IER, 0x0000); + ks8851_wrreg16(ks, KS_ISR, 0xffff); + mutex_unlock(&ks->lock); /* stop any outstanding work */ flush_work(&ks->irq_work); flush_work(&ks->tx_work); flush_work(&ks->rxctrl_work); - /* turn off the IRQs and ack any outstanding */ - ks8851_wrreg16(ks, KS_IER, 0x0000); - ks8851_wrreg16(ks, KS_ISR, 0xffff); - + mutex_lock(&ks->lock); /* shutdown RX process */ ks8851_wrreg16(ks, KS_RXCR1, 0x0000); @@ -907,6 +908,7 @@ static int ks8851_net_stop(struct net_device *dev) /* set powermode to soft power down to save power */ ks8851_set_powermode(ks, PMECR_PM_SOFTDOWN); + mutex_unlock(&ks->lock); /* ensure any queued tx buffers are dumped */ while (!skb_queue_empty(&ks->txq)) { @@ -918,7 +920,6 @@ static int ks8851_net_stop(struct net_device *dev) dev_kfree_skb(txb); } - mutex_unlock(&ks->lock); return 0; } -- cgit v1.2.3-18-g5258 From 792df87228965c58c307877af00498641584bd47 Mon Sep 17 00:00:00 2001 From: Wenqi Ma Date: Thu, 19 Apr 2012 00:39:37 +0000 Subject: net/hyperv: Adding cancellation to ensure rndis filter is closed Although the network interface is down, the RX packets number which could be observed by ifconfig may keep on increasing. This is because the WORK scheduled in netvsc_set_multicast_list() may be executed after netvsc_close(). That means the rndis filter may be re-enabled by do_set_multicast() even if it was closed by netvsc_close(). By canceling possible WORK before close the rndis filter, the issue could be never happened. Signed-off-by: Wenqi Ma Reviewed-by: Wei Yongjun Signed-off-by: David S. Miller --- drivers/net/hyperv/netvsc_drv.c | 38 ++++++++++++++------------------------ 1 file changed, 14 insertions(+), 24 deletions(-) diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index dd294783b5c..2d59138db7f 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -44,6 +44,7 @@ struct net_device_context { /* point back to our device context */ struct hv_device *device_ctx; struct delayed_work dwork; + struct work_struct work; }; @@ -51,30 +52,22 @@ static int ring_size = 128; module_param(ring_size, int, S_IRUGO); MODULE_PARM_DESC(ring_size, "Ring buffer size (# of pages)"); -struct set_multicast_work { - struct work_struct work; - struct net_device *net; -}; - static void do_set_multicast(struct work_struct *w) { - struct set_multicast_work *swk = - container_of(w, struct set_multicast_work, work); - struct net_device *net = swk->net; - - struct net_device_context *ndevctx = netdev_priv(net); + struct net_device_context *ndevctx = + container_of(w, struct net_device_context, work); struct netvsc_device *nvdev; struct rndis_device *rdev; nvdev = hv_get_drvdata(ndevctx->device_ctx); - if (nvdev == NULL) - goto out; + if (nvdev == NULL || nvdev->ndev == NULL) + return; rdev = nvdev->extension; if (rdev == NULL) - goto out; + return; - if (net->flags & IFF_PROMISC) + if (nvdev->ndev->flags & IFF_PROMISC) rndis_filter_set_packet_filter(rdev, NDIS_PACKET_TYPE_PROMISCUOUS); else @@ -82,21 +75,13 @@ static void do_set_multicast(struct work_struct *w) NDIS_PACKET_TYPE_BROADCAST | NDIS_PACKET_TYPE_ALL_MULTICAST | NDIS_PACKET_TYPE_DIRECTED); - -out: - kfree(w); } static void netvsc_set_multicast_list(struct net_device *net) { - struct set_multicast_work *swk = - kmalloc(sizeof(struct set_multicast_work), GFP_ATOMIC); - if (swk == NULL) - return; + struct net_device_context *net_device_ctx = netdev_priv(net); - swk->net = net; - INIT_WORK(&swk->work, do_set_multicast); - schedule_work(&swk->work); + schedule_work(&net_device_ctx->work); } static int netvsc_open(struct net_device *net) @@ -125,6 +110,8 @@ static int netvsc_close(struct net_device *net) netif_tx_disable(net); + /* Make sure netvsc_set_multicast_list doesn't re-enable filter! */ + cancel_work_sync(&net_device_ctx->work); ret = rndis_filter_close(device_obj); if (ret != 0) netdev_err(net, "unable to close device (ret %d).\n", ret); @@ -335,6 +322,7 @@ static int netvsc_change_mtu(struct net_device *ndev, int mtu) nvdev->start_remove = true; cancel_delayed_work_sync(&ndevctx->dwork); + cancel_work_sync(&ndevctx->work); netif_tx_disable(ndev); rndis_filter_device_remove(hdev); @@ -403,6 +391,7 @@ static int netvsc_probe(struct hv_device *dev, net_device_ctx->device_ctx = dev; hv_set_drvdata(dev, net); INIT_DELAYED_WORK(&net_device_ctx->dwork, netvsc_send_garp); + INIT_WORK(&net_device_ctx->work, do_set_multicast); net->netdev_ops = &device_ops; @@ -456,6 +445,7 @@ static int netvsc_remove(struct hv_device *dev) ndev_ctx = netdev_priv(net); cancel_delayed_work_sync(&ndev_ctx->dwork); + cancel_work_sync(&ndev_ctx->work); /* Stop outbound asap */ netif_tx_disable(net); -- cgit v1.2.3-18-g5258 From e8195b24feb208f6e944e7542779f4397776794d Mon Sep 17 00:00:00 2001 From: Matt Renzelmann Date: Thu, 19 Apr 2012 07:17:17 +0000 Subject: ks8851: Fix request_irq/free_irq mismatch The dev_id parameter passed to free_irq needs to match the one passed to the corresponding request_irq. Signed-off-by: Matt Renzelmann Acked-by: Stephen Boyd Signed-off-by: David S. Miller --- drivers/net/ethernet/micrel/ks8851.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/micrel/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c index ad10759e345..f8dda009d3c 100644 --- a/drivers/net/ethernet/micrel/ks8851.c +++ b/drivers/net/ethernet/micrel/ks8851.c @@ -1525,7 +1525,7 @@ static int __devinit ks8851_probe(struct spi_device *spi) err_netdev: - free_irq(ndev->irq, ndev); + free_irq(ndev->irq, ks); err_id: err_irq: -- cgit v1.2.3-18-g5258 From bbe362be5368b9f531b95a4a9b502ae2832e1dac Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 19 Apr 2012 07:16:21 +0000 Subject: drop_monitor: allow more events per second It seems there is a logic error in trace_drop_common(), since we store only 64 drops, even if they are from same location. This fix is a one liner, but we probably need more work to avoid useless atomic dec/inc Now I can watch 1 Mpps drops through dropwatch... Signed-off-by: Eric Dumazet Cc: Neil Horman Acked-by: Neil Horman Signed-off-by: David S. Miller --- net/core/drop_monitor.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c index 7f36b38e060..5c3c81a609e 100644 --- a/net/core/drop_monitor.c +++ b/net/core/drop_monitor.c @@ -150,6 +150,7 @@ static void trace_drop_common(struct sk_buff *skb, void *location) for (i = 0; i < msg->entries; i++) { if (!memcmp(&location, msg->points[i].pc, sizeof(void *))) { msg->points[i].count++; + atomic_inc(&data->dm_hit_count); goto out; } } -- cgit v1.2.3-18-g5258 From 163faf31778e536ac6125bc8b14f4667adc910e9 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 19 Apr 2012 10:36:33 +0000 Subject: drivers/net: Do not free an IRQ if its request failed Refrain from attempting to free an interrupt line if the request fails and hence, there is no IRQ to free. CC: netdev@vger.kernel.org Signed-off-by: Lee Jones Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smsc911x.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index 5aa2dbe2bfb..cd3defb11ff 100644 --- a/drivers/net/ethernet/smsc/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c @@ -2378,7 +2378,6 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev) SET_NETDEV_DEV(dev, &pdev->dev); pdata = netdev_priv(dev); - dev->irq = irq_res->start; irq_flags = irq_res->flags & IRQF_TRIGGER_MASK; pdata->ioaddr = ioremap_nocache(res->start, res_size); @@ -2442,7 +2441,7 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev) if (retval) { SMSC_WARN(pdata, probe, "Unable to claim requested irq: %d", dev->irq); - goto out_free_irq; + goto out_disable_resources; } retval = register_netdev(dev); -- cgit v1.2.3-18-g5258 From e95c8438ea1c56c254f0607c8fb6bca7f463c744 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Fri, 20 Apr 2012 21:03:36 +0200 Subject: drm/i915: fixup load-detect on enabled, but not active pipe Somehow we have a fast-path that tries to avoid going through the load-detect code when the encode already has a crtc associated. But this fails horribly when the crtc is off. The load detect pipe itself manages this case well (and also does not forget to restore the dpms state), so just rip out this special case. The issue seems to go back all the way to the commit that originally introduced load-detection on the vga output: commit e4a5d54f924ea5ce2913d9d0687d034004816465 Author: Ma Ling Date: Tue May 26 11:31:00 2009 +0800 drm/i915: Add support for VGA load detection (pre-945). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43020 Reported-by: Jean Delvare Reviewed-by: Chris Wilson Signed-Off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_crt.c | 29 +++++++++++------------------ 1 file changed, 11 insertions(+), 18 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index 4d3d736a4f5..90b9793fd5d 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -430,8 +430,8 @@ intel_crt_detect(struct drm_connector *connector, bool force) { struct drm_device *dev = connector->dev; struct intel_crt *crt = intel_attached_crt(connector); - struct drm_crtc *crtc; enum drm_connector_status status; + struct intel_load_detect_pipe tmp; if (I915_HAS_HOTPLUG(dev)) { if (intel_crt_detect_hotplug(connector)) { @@ -450,23 +450,16 @@ intel_crt_detect(struct drm_connector *connector, bool force) return connector->status; /* for pre-945g platforms use load detect */ - crtc = crt->base.base.crtc; - if (crtc && crtc->enabled) { - status = intel_crt_load_detect(crt); - } else { - struct intel_load_detect_pipe tmp; - - if (intel_get_load_detect_pipe(&crt->base, connector, NULL, - &tmp)) { - if (intel_crt_detect_ddc(connector)) - status = connector_status_connected; - else - status = intel_crt_load_detect(crt); - intel_release_load_detect_pipe(&crt->base, connector, - &tmp); - } else - status = connector_status_unknown; - } + if (intel_get_load_detect_pipe(&crt->base, connector, NULL, + &tmp)) { + if (intel_crt_detect_ddc(connector)) + status = connector_status_connected; + else + status = intel_crt_load_detect(crt); + intel_release_load_detect_pipe(&crt->base, connector, + &tmp); + } else + status = connector_status_unknown; return status; } -- cgit v1.2.3-18-g5258 From d135c522f1234f62e81be29cebdf59e9955139ad Mon Sep 17 00:00:00 2001 From: Neal Cardwell Date: Sun, 22 Apr 2012 09:45:47 +0000 Subject: tcp: fix TCP_MAXSEG for established IPv6 passive sockets Commit f5fff5d forgot to fix TCP_MAXSEG behavior IPv6 sockets, so IPv6 TCP server sockets that used TCP_MAXSEG would find that the advmss of child sockets would be incorrect. This commit mirrors the advmss logic from tcp_v4_syn_recv_sock in tcp_v6_syn_recv_sock. Eventually this logic should probably be shared between IPv4 and IPv6, but this at least fixes this issue. Signed-off-by: Neal Cardwell Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv6/tcp_ipv6.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index 86cfe6005f4..98256cf72f9 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -1383,6 +1383,10 @@ static struct sock * tcp_v6_syn_recv_sock(struct sock *sk, struct sk_buff *skb, tcp_mtup_init(newsk); tcp_sync_mss(newsk, dst_mtu(dst)); newtp->advmss = dst_metric_advmss(dst); + if (tcp_sk(sk)->rx_opt.user_mss && + tcp_sk(sk)->rx_opt.user_mss < newtp->advmss) + newtp->advmss = tcp_sk(sk)->rx_opt.user_mss; + tcp_initialize_rcv_mss(newsk); if (tcp_rsk(req)->snt_synack) tcp_valid_rtt_meas(newsk, -- cgit v1.2.3-18-g5258 From 2ef822c55371b20548d4f58193c580407a5d738d Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Mon, 16 Apr 2012 19:55:39 +0000 Subject: powerpc/eeh: Fix crash caused by null eeh_dev The problem was reported by Anton Blanchard. While EEH error happened to the PCI device without the corresponding device driver, kernel crash was seen. Eventually, I successfully reproduced the problem on Firebird-L machine with utility "errinjct". Initially, the device driver for Emulex ethernet MAC has been disabled from .config and force data parity on the Emulex ethernet MAC with help of "errinjct". Eventually, I saw the kernel crash after issueing couple of "lspci -v" command. The root cause behind is that the PCI device, including the reference to the corresponding eeh device, will be removed from the system while EEH does recovery. Afterwards, the PCI device will be probed again and added into the system accordingly. So it's not safe to retrieve the eeh device from the corresponding PCI device after the PCI device has been removed and not added again. The patch fixes the issue and retrieve the eeh device from OF node instead of PCI device after the PCI device has been removed. Signed-off-by: Gavin Shan Tested-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/eeh.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 309d38ef732..a75e37dc41a 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -1076,7 +1076,7 @@ static void eeh_add_device_late(struct pci_dev *dev) pr_debug("EEH: Adding device %s\n", pci_name(dev)); dn = pci_device_to_OF_node(dev); - edev = pci_dev_to_eeh_dev(dev); + edev = of_node_to_eeh_dev(dn); if (edev->pdev == dev) { pr_debug("EEH: Already referenced !\n"); return; -- cgit v1.2.3-18-g5258 From 3027691e58bfb21f6ea2e9f1d225d11b4e2b20e2 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 18 Apr 2012 22:16:48 +0000 Subject: powerpc/pmac: Don't add_timer() twice If the interrupt and the timeout happen roughly at the same time, we can get into a situation where the timer function is run while the interrupt has already been processed. In this case, the timer function might end up doing an add_timer on an already pending timer, causing a BUG_ON() to trigger. Instead, just skip the whole timeout operation if we see that the timer is pending. The spinlock ensures that the only way that happens is if we already started a new operation and thus the timeout can be ignored. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/powermac/low_i2c.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c index 996c5ff7824..03685a329d7 100644 --- a/arch/powerpc/platforms/powermac/low_i2c.c +++ b/arch/powerpc/platforms/powermac/low_i2c.c @@ -366,11 +366,20 @@ static void kw_i2c_timeout(unsigned long data) unsigned long flags; spin_lock_irqsave(&host->lock, flags); + + /* + * If the timer is pending, that means we raced with the + * irq, in which case we just return + */ + if (timer_pending(&host->timeout_timer)) + goto skip; + kw_i2c_handle_interrupt(host, kw_read_reg(reg_isr)); if (host->state != state_idle) { host->timeout_timer.expires = jiffies + KW_POLL_TIMEOUT; add_timer(&host->timeout_timer); } + skip: spin_unlock_irqrestore(&host->lock, flags); } -- cgit v1.2.3-18-g5258 From 3a2b4f7c355ff1c97e4adebadf0a1aefd7c4518a Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 19 Apr 2012 17:29:34 +0000 Subject: powerpc/mpic: Fix confusion between hw_irq and virq mpic_is_ipi() takes a virq and immediately converts it to a hw_irq. However, one of the two call sites calls it with a ... hw_irq. The other call site also happens to have the hw_irq at hand, so let's change it to just take that as an argument. Also change mpic_is_tm() for consistency. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/sysdev/mpic.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 9ac71ebd2c4..665b0f80678 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -604,18 +604,14 @@ static struct mpic *mpic_find(unsigned int irq) } /* Determine if the linux irq is an IPI */ -static unsigned int mpic_is_ipi(struct mpic *mpic, unsigned int irq) +static unsigned int mpic_is_ipi(struct mpic *mpic, unsigned int src) { - unsigned int src = virq_to_hw(irq); - return (src >= mpic->ipi_vecs[0] && src <= mpic->ipi_vecs[3]); } /* Determine if the linux irq is a timer */ -static unsigned int mpic_is_tm(struct mpic *mpic, unsigned int irq) +static unsigned int mpic_is_tm(struct mpic *mpic, unsigned int src) { - unsigned int src = virq_to_hw(irq); - return (src >= mpic->timer_vecs[0] && src <= mpic->timer_vecs[7]); } @@ -1555,12 +1551,12 @@ void mpic_irq_set_priority(unsigned int irq, unsigned int pri) return; raw_spin_lock_irqsave(&mpic_lock, flags); - if (mpic_is_ipi(mpic, irq)) { + if (mpic_is_ipi(mpic, src)) { reg = mpic_ipi_read(src - mpic->ipi_vecs[0]) & ~MPIC_VECPRI_PRIORITY_MASK; mpic_ipi_write(src - mpic->ipi_vecs[0], reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT)); - } else if (mpic_is_tm(mpic, irq)) { + } else if (mpic_is_tm(mpic, src)) { reg = mpic_tm_read(src - mpic->timer_vecs[0]) & ~MPIC_VECPRI_PRIORITY_MASK; mpic_tm_write(src - mpic->timer_vecs[0], -- cgit v1.2.3-18-g5258 From 3fca40c704dd013797f2c0c518f37cd2cc8e19fe Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 19 Apr 2012 17:29:42 +0000 Subject: irq: Add IRQ_TYPE_DEFAULT for use by PIC drivers This is meant typically to allow a PIC driver's irq domain map() callback to establish sane defaults for the interrupt (and make sure that the HW and the irq_desc are in sync as far as the trigger is concerned). The irq core may not call the set_trigger callback if it thinks the trigger is already set to the right setting, so we need to ensure new descriptors are properly synchronized with the hardware. Signed-off-by: Benjamin Herrenschmidt --- include/linux/irq.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/include/linux/irq.h b/include/linux/irq.h index 7810406f3d8..b27cfcfd3a5 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -49,6 +49,12 @@ typedef void (*irq_preflow_handler_t)(struct irq_data *data); * IRQ_TYPE_LEVEL_LOW - low level triggered * IRQ_TYPE_LEVEL_MASK - Mask to filter out the level bits * IRQ_TYPE_SENSE_MASK - Mask for all the above bits + * IRQ_TYPE_DEFAULT - For use by some PICs to ask irq_set_type + * to setup the HW to a sane default (used + * by irqdomain map() callbacks to synchronize + * the HW state and SW flags for a newly + * allocated descriptor). + * * IRQ_TYPE_PROBE - Special flag for probing in progress * * Bits which can be modified via irq_set/clear/modify_status_flags() @@ -77,6 +83,7 @@ enum { IRQ_TYPE_LEVEL_LOW = 0x00000008, IRQ_TYPE_LEVEL_MASK = (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH), IRQ_TYPE_SENSE_MASK = 0x0000000f, + IRQ_TYPE_DEFAULT = IRQ_TYPE_SENSE_MASK, IRQ_TYPE_PROBE = 0x00000010, -- cgit v1.2.3-18-g5258 From 446f6d06fab0b49c61887ecbe8286d6aaa796637 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 19 Apr 2012 17:30:57 +0000 Subject: powerpc/mpic: Properly set default triggers This gets rid of the unused default senses array, and replaces the incorrect use of IRQ_TYPE_NONE with the new IRQ_TYPE_DEFAULT for the initial set_trigger() call when mapping an interrupt. This in turn makes us read the HW state and update the irq desc accordingly. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/mpic.h | 18 ------------------ arch/powerpc/sysdev/mpic.c | 42 +++++++++++++++++++++++++++++------------ 2 files changed, 30 insertions(+), 30 deletions(-) diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h index c65b9294376..c9f698a994b 100644 --- a/arch/powerpc/include/asm/mpic.h +++ b/arch/powerpc/include/asm/mpic.h @@ -275,9 +275,6 @@ struct mpic unsigned int isu_mask; /* Number of sources */ unsigned int num_sources; - /* default senses array */ - unsigned char *senses; - unsigned int senses_count; /* vector numbers used for internal sources (ipi/timers) */ unsigned int ipi_vecs[4]; @@ -415,21 +412,6 @@ extern struct mpic *mpic_alloc(struct device_node *node, extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, phys_addr_t phys_addr); -/* Set default sense codes - * - * @mpic: controller - * @senses: array of sense codes - * @count: size of above array - * - * Optionally provide an array (indexed on hardware interrupt numbers - * for this MPIC) of default sense codes for the chip. Those are linux - * sense codes IRQ_TYPE_* - * - * The driver gets ownership of the pointer, don't dispose of it or - * anything like that. __init only. - */ -extern void mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count); - /* Initialize the controller. After this has been called, none of the above * should be called again for this mpic diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 665b0f80678..395af134774 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -872,21 +872,45 @@ int mpic_set_irq_type(struct irq_data *d, unsigned int flow_type) if (src >= mpic->num_sources) return -EINVAL; + vold = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)); + + /* We don't support "none" type */ if (flow_type == IRQ_TYPE_NONE) - if (mpic->senses && src < mpic->senses_count) - flow_type = mpic->senses[src]; - if (flow_type == IRQ_TYPE_NONE) - flow_type = IRQ_TYPE_LEVEL_LOW; + flow_type = IRQ_TYPE_DEFAULT; + + /* Default: read HW settings */ + if (flow_type == IRQ_TYPE_DEFAULT) { + switch(vold & (MPIC_INFO(VECPRI_POLARITY_MASK) | + MPIC_INFO(VECPRI_SENSE_MASK))) { + case MPIC_INFO(VECPRI_SENSE_EDGE) | + MPIC_INFO(VECPRI_POLARITY_POSITIVE): + flow_type = IRQ_TYPE_EDGE_RISING; + break; + case MPIC_INFO(VECPRI_SENSE_EDGE) | + MPIC_INFO(VECPRI_POLARITY_NEGATIVE): + flow_type = IRQ_TYPE_EDGE_FALLING; + break; + case MPIC_INFO(VECPRI_SENSE_LEVEL) | + MPIC_INFO(VECPRI_POLARITY_POSITIVE): + flow_type = IRQ_TYPE_LEVEL_HIGH; + break; + case MPIC_INFO(VECPRI_SENSE_LEVEL) | + MPIC_INFO(VECPRI_POLARITY_NEGATIVE): + flow_type = IRQ_TYPE_LEVEL_LOW; + break; + } + } + /* Apply to irq desc */ irqd_set_trigger_type(d, flow_type); + /* Apply to HW */ if (mpic_is_ht_interrupt(mpic, src)) vecpri = MPIC_VECPRI_POLARITY_POSITIVE | MPIC_VECPRI_SENSE_EDGE; else vecpri = mpic_type_to_vecpri(mpic, flow_type); - vold = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)); vnew = vold & ~(MPIC_INFO(VECPRI_POLARITY_MASK) | MPIC_INFO(VECPRI_SENSE_MASK)); vnew |= vecpri; @@ -1022,7 +1046,7 @@ static int mpic_host_map(struct irq_domain *h, unsigned int virq, irq_set_chip_and_handler(virq, chip, handle_fasteoi_irq); /* Set default irq type */ - irq_set_irq_type(virq, IRQ_TYPE_NONE); + irq_set_irq_type(virq, IRQ_TYPE_DEFAULT); /* If the MPIC was reset, then all vectors have already been * initialized. Otherwise, a per source lazy initialization @@ -1413,12 +1437,6 @@ void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, mpic->num_sources = isu_first + mpic->isu_size; } -void __init mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count) -{ - mpic->senses = senses; - mpic->senses_count = count; -} - void __init mpic_init(struct mpic *mpic) { int i, cpu; -- cgit v1.2.3-18-g5258 From eae1415dda93fd4edcce0637aa64b3c9b567563f Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Fri, 20 Apr 2012 11:39:17 -0400 Subject: hwmon: (ad7314) Fix build warning The following build warning is seen in some configurations. drivers/hwmon/ad7314.c: In function 'ad7314_show_temperature': drivers/hwmon/ad7314.c:70: warning: 'data' may be used uninitialized in this function Fix by overloading the return value from ad7314_spi_read with both data and error code (the returned data is really u16 and needs to be converted into a signed value anyway). Signed-off-by: Guenter Roeck Cc: Jonathan Cameron Acked-by: Jean Delvare --- drivers/hwmon/ad7314.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/hwmon/ad7314.c b/drivers/hwmon/ad7314.c index ce43642ef03..f85ce70d967 100644 --- a/drivers/hwmon/ad7314.c +++ b/drivers/hwmon/ad7314.c @@ -47,7 +47,7 @@ struct ad7314_data { u16 rx ____cacheline_aligned; }; -static int ad7314_spi_read(struct ad7314_data *chip, s16 *data) +static int ad7314_spi_read(struct ad7314_data *chip) { int ret; @@ -57,9 +57,7 @@ static int ad7314_spi_read(struct ad7314_data *chip, s16 *data) return ret; } - *data = be16_to_cpu(chip->rx); - - return ret; + return be16_to_cpu(chip->rx); } static ssize_t ad7314_show_temperature(struct device *dev, @@ -70,12 +68,12 @@ static ssize_t ad7314_show_temperature(struct device *dev, s16 data; int ret; - ret = ad7314_spi_read(chip, &data); + ret = ad7314_spi_read(chip); if (ret < 0) return ret; switch (spi_get_device_id(chip->spi_dev)->driver_data) { case ad7314: - data = (data & AD7314_TEMP_MASK) >> AD7314_TEMP_OFFSET; + data = (ret & AD7314_TEMP_MASK) >> AD7314_TEMP_OFFSET; data = (data << 6) >> 6; return sprintf(buf, "%d\n", 250 * data); @@ -86,7 +84,7 @@ static ssize_t ad7314_show_temperature(struct device *dev, * with a sign bit - which is a 14 bit 2's complement * register. 1lsb - 31.25 milli degrees centigrade */ - data &= ADT7301_TEMP_MASK; + data = ret & ADT7301_TEMP_MASK; data = (data << 2) >> 2; return sprintf(buf, "%d\n", -- cgit v1.2.3-18-g5258 From 5a218ceba7b64f506bf4f004b04bb457c1805a62 Mon Sep 17 00:00:00 2001 From: Carlos Chinea Date: Wed, 4 Apr 2012 14:11:45 +0300 Subject: HSI: hsi: Rework hsi_controller release Use the proper release mechanism for hsi_controller and hsi_ports structures. Free the structures through their associated device release callbacks. Signed-off-by: Carlos Chinea Acked-by: Greg Kroah-Hartman Acked-by: Linus Walleij --- drivers/hsi/hsi.c | 108 +++++++++++++++++++++++++++++------------------- include/linux/hsi/hsi.h | 6 +-- 2 files changed, 69 insertions(+), 45 deletions(-) diff --git a/drivers/hsi/hsi.c b/drivers/hsi/hsi.c index 4e2d79b7933..c17d12ca8e7 100644 --- a/drivers/hsi/hsi.c +++ b/drivers/hsi/hsi.c @@ -140,12 +140,17 @@ static int hsi_remove_port(struct device *dev, void *data __maybe_unused) return 0; } -static void hsi_controller_release(struct device *dev __maybe_unused) +static void hsi_controller_release(struct device *dev) { + struct hsi_controller *hsi = to_hsi_controller(dev); + + kfree(hsi->port); + kfree(hsi); } -static void hsi_port_release(struct device *dev __maybe_unused) +static void hsi_port_release(struct device *dev) { + kfree(to_hsi_port(dev)); } /** @@ -172,18 +177,14 @@ int hsi_register_controller(struct hsi_controller *hsi) hsi->device.type = &hsi_ctrl; hsi->device.bus = &hsi_bus_type; - hsi->device.release = hsi_controller_release; - err = device_register(&hsi->device); + err = device_add(&hsi->device); if (err < 0) return err; for (i = 0; i < hsi->num_ports; i++) { - hsi->port[i].device.parent = &hsi->device; - hsi->port[i].device.bus = &hsi_bus_type; - hsi->port[i].device.release = hsi_port_release; - hsi->port[i].device.type = &hsi_port; - INIT_LIST_HEAD(&hsi->port[i].clients); - spin_lock_init(&hsi->port[i].clock); - err = device_register(&hsi->port[i].device); + hsi->port[i]->device.parent = &hsi->device; + hsi->port[i]->device.bus = &hsi_bus_type; + hsi->port[i]->device.type = &hsi_port; + err = device_add(&hsi->port[i]->device); if (err < 0) goto out; } @@ -192,7 +193,9 @@ int hsi_register_controller(struct hsi_controller *hsi) return 0; out: - hsi_unregister_controller(hsi); + while (i-- > 0) + device_del(&hsi->port[i]->device); + device_del(&hsi->device); return err; } @@ -222,6 +225,29 @@ static inline int hsi_dummy_cl(struct hsi_client *cl __maybe_unused) return 0; } +/** + * hsi_put_controller - Free an HSI controller + * + * @hsi: Pointer to the HSI controller to freed + * + * HSI controller drivers should only use this function if they need + * to free their allocated hsi_controller structures before a successful + * call to hsi_register_controller. Other use is not allowed. + */ +void hsi_put_controller(struct hsi_controller *hsi) +{ + unsigned int i; + + if (!hsi) + return; + + for (i = 0; i < hsi->num_ports; i++) + if (hsi->port && hsi->port[i]) + put_device(&hsi->port[i]->device); + put_device(&hsi->device); +} +EXPORT_SYMBOL_GPL(hsi_put_controller); + /** * hsi_alloc_controller - Allocate an HSI controller and its ports * @n_ports: Number of ports on the HSI controller @@ -232,54 +258,52 @@ static inline int hsi_dummy_cl(struct hsi_client *cl __maybe_unused) struct hsi_controller *hsi_alloc_controller(unsigned int n_ports, gfp_t flags) { struct hsi_controller *hsi; - struct hsi_port *port; + struct hsi_port **port; unsigned int i; if (!n_ports) return NULL; - port = kzalloc(sizeof(*port)*n_ports, flags); - if (!port) - return NULL; hsi = kzalloc(sizeof(*hsi), flags); if (!hsi) - goto out; - for (i = 0; i < n_ports; i++) { - dev_set_name(&port[i].device, "port%d", i); - port[i].num = i; - port[i].async = hsi_dummy_msg; - port[i].setup = hsi_dummy_cl; - port[i].flush = hsi_dummy_cl; - port[i].start_tx = hsi_dummy_cl; - port[i].stop_tx = hsi_dummy_cl; - port[i].release = hsi_dummy_cl; - mutex_init(&port[i].lock); + return NULL; + port = kzalloc(sizeof(*port)*n_ports, flags); + if (!port) { + kfree(hsi); + return NULL; } hsi->num_ports = n_ports; hsi->port = port; + hsi->device.release = hsi_controller_release; + device_initialize(&hsi->device); + + for (i = 0; i < n_ports; i++) { + port[i] = kzalloc(sizeof(**port), flags); + if (port[i] == NULL) + goto out; + port[i]->num = i; + port[i]->async = hsi_dummy_msg; + port[i]->setup = hsi_dummy_cl; + port[i]->flush = hsi_dummy_cl; + port[i]->start_tx = hsi_dummy_cl; + port[i]->stop_tx = hsi_dummy_cl; + port[i]->release = hsi_dummy_cl; + mutex_init(&port[i]->lock); + INIT_LIST_HEAD(&hsi->port[i]->clients); + spin_lock_init(&hsi->port[i]->clock); + dev_set_name(&port[i]->device, "port%d", i); + hsi->port[i]->device.release = hsi_port_release; + device_initialize(&hsi->port[i]->device); + } return hsi; out: - kfree(port); + hsi_put_controller(hsi); return NULL; } EXPORT_SYMBOL_GPL(hsi_alloc_controller); -/** - * hsi_free_controller - Free an HSI controller - * @hsi: Pointer to HSI controller - */ -void hsi_free_controller(struct hsi_controller *hsi) -{ - if (!hsi) - return; - - kfree(hsi->port); - kfree(hsi); -} -EXPORT_SYMBOL_GPL(hsi_free_controller); - /** * hsi_free_msg - Free an HSI message * @msg: Pointer to the HSI message diff --git a/include/linux/hsi/hsi.h b/include/linux/hsi/hsi.h index 4b178067f40..7f3b7262a2b 100644 --- a/include/linux/hsi/hsi.h +++ b/include/linux/hsi/hsi.h @@ -270,13 +270,13 @@ struct hsi_controller { struct module *owner; unsigned int id; unsigned int num_ports; - struct hsi_port *port; + struct hsi_port **port; }; #define to_hsi_controller(dev) container_of(dev, struct hsi_controller, device) struct hsi_controller *hsi_alloc_controller(unsigned int n_ports, gfp_t flags); -void hsi_free_controller(struct hsi_controller *hsi); +void hsi_put_controller(struct hsi_controller *hsi); int hsi_register_controller(struct hsi_controller *hsi); void hsi_unregister_controller(struct hsi_controller *hsi); @@ -294,7 +294,7 @@ static inline void *hsi_controller_drvdata(struct hsi_controller *hsi) static inline struct hsi_port *hsi_find_port_num(struct hsi_controller *hsi, unsigned int num) { - return (num < hsi->num_ports) ? &hsi->port[num] : NULL; + return (num < hsi->num_ports) ? hsi->port[num] : NULL; } /* -- cgit v1.2.3-18-g5258 From 90e41f9dc75b47ab94e2191e4c86aa8259699a33 Mon Sep 17 00:00:00 2001 From: Carlos Chinea Date: Wed, 11 Apr 2012 11:01:11 +0300 Subject: HSI: hsi: Fix error path cleanup on client registration HSI client structure should be freed on error path after calling device_registration by dropping a reference to it. Signed-off-by: Carlos Chinea Acked-by: Greg Kroah-Hartman Acked-by: Linus Walleij --- drivers/hsi/hsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hsi/hsi.c b/drivers/hsi/hsi.c index c17d12ca8e7..5c76a36419d 100644 --- a/drivers/hsi/hsi.c +++ b/drivers/hsi/hsi.c @@ -100,7 +100,7 @@ static void hsi_new_client(struct hsi_port *port, struct hsi_board_info *info) cl->device.archdata = *info->archdata; if (device_register(&cl->device) < 0) { pr_err("hsi: failed to register client: %s\n", info->name); - kfree(cl); + put_device(&cl->device); } } -- cgit v1.2.3-18-g5258 From 6f02b9e9b44a3bfc0046da3ff2707dae0b5e2f30 Mon Sep 17 00:00:00 2001 From: Carlos Chinea Date: Tue, 10 Apr 2012 15:11:24 +0300 Subject: HSI: hsi: Remove controllers and ports from the bus HSI controllers and ports do not belong to the HSI bus. Those devices are not supposed to have a driver attached to them. Signed-off-by: Carlos Chinea Acked-by: Greg Kroah-Hartman Acked-by: Linus Walleij --- drivers/hsi/hsi.c | 20 +------------------- 1 file changed, 1 insertion(+), 19 deletions(-) diff --git a/drivers/hsi/hsi.c b/drivers/hsi/hsi.c index 5c76a36419d..cec1f0c0455 100644 --- a/drivers/hsi/hsi.c +++ b/drivers/hsi/hsi.c @@ -29,18 +29,6 @@ #include #include "hsi_core.h" -static struct device_type hsi_ctrl = { - .name = "hsi_controller", -}; - -static struct device_type hsi_cl = { - .name = "hsi_client", -}; - -static struct device_type hsi_port = { - .name = "hsi_port", -}; - static ssize_t modalias_show(struct device *dev, struct device_attribute *a __maybe_unused, char *buf) { @@ -54,8 +42,7 @@ static struct device_attribute hsi_bus_dev_attrs[] = { static int hsi_bus_uevent(struct device *dev, struct kobj_uevent_env *env) { - if (dev->type == &hsi_cl) - add_uevent_var(env, "MODALIAS=hsi:%s", dev_name(dev)); + add_uevent_var(env, "MODALIAS=hsi:%s", dev_name(dev)); return 0; } @@ -85,7 +72,6 @@ static void hsi_new_client(struct hsi_port *port, struct hsi_board_info *info) cl = kzalloc(sizeof(*cl), GFP_KERNEL); if (!cl) return; - cl->device.type = &hsi_cl; cl->tx_cfg = info->tx_cfg; cl->rx_cfg = info->rx_cfg; cl->device.bus = &hsi_bus_type; @@ -175,15 +161,11 @@ int hsi_register_controller(struct hsi_controller *hsi) unsigned int i; int err; - hsi->device.type = &hsi_ctrl; - hsi->device.bus = &hsi_bus_type; err = device_add(&hsi->device); if (err < 0) return err; for (i = 0; i < hsi->num_ports; i++) { hsi->port[i]->device.parent = &hsi->device; - hsi->port[i]->device.bus = &hsi_bus_type; - hsi->port[i]->device.type = &hsi_port; err = device_add(&hsi->port[i]->device); if (err < 0) goto out; -- cgit v1.2.3-18-g5258 From ec1c56ff813a198d656d4aa42e5de03e45751bf8 Mon Sep 17 00:00:00 2001 From: Carlos Chinea Date: Wed, 11 Apr 2012 10:55:53 +0300 Subject: HSI: hsi: Rework hsi_event interface Remove custom hack and make use of the notifier chain interfaces for delivering events from the ports to their associated clients. Clients that want to receive port events need to register their callbacks using hsi_register_port_event(). The callbacks can be called in interrupt context. Use hsi_unregestier_port_event() to undo the registration. Signed-off-by: Carlos Chinea Acked-by: Greg Kroah-Hartman Acked-by: Linus Walleij --- drivers/hsi/hsi.c | 101 ++++++++++++++++++++++++++---------------------- include/linux/hsi/hsi.h | 25 ++++++------ 2 files changed, 68 insertions(+), 58 deletions(-) diff --git a/drivers/hsi/hsi.c b/drivers/hsi/hsi.c index cec1f0c0455..2d58f939d27 100644 --- a/drivers/hsi/hsi.c +++ b/drivers/hsi/hsi.c @@ -21,12 +21,11 @@ */ #include #include -#include #include -#include #include #include #include +#include #include "hsi_core.h" static ssize_t modalias_show(struct device *dev, @@ -67,7 +66,6 @@ static void hsi_client_release(struct device *dev) static void hsi_new_client(struct hsi_port *port, struct hsi_board_info *info) { struct hsi_client *cl; - unsigned long flags; cl = kzalloc(sizeof(*cl), GFP_KERNEL); if (!cl) @@ -79,9 +77,6 @@ static void hsi_new_client(struct hsi_port *port, struct hsi_board_info *info) cl->device.release = hsi_client_release; dev_set_name(&cl->device, info->name); cl->device.platform_data = info->platform_data; - spin_lock_irqsave(&port->clock, flags); - list_add_tail(&cl->link, &port->clients); - spin_unlock_irqrestore(&port->clock, flags); if (info->archdata) cl->device.archdata = *info->archdata; if (device_register(&cl->device) < 0) { @@ -106,13 +101,6 @@ static void hsi_scan_board_info(struct hsi_controller *hsi) static int hsi_remove_client(struct device *dev, void *data __maybe_unused) { - struct hsi_client *cl = to_hsi_client(dev); - struct hsi_port *port = to_hsi_port(dev->parent); - unsigned long flags; - - spin_lock_irqsave(&port->clock, flags); - list_del(&cl->link); - spin_unlock_irqrestore(&port->clock, flags); device_unregister(dev); return 0; @@ -271,8 +259,7 @@ struct hsi_controller *hsi_alloc_controller(unsigned int n_ports, gfp_t flags) port[i]->stop_tx = hsi_dummy_cl; port[i]->release = hsi_dummy_cl; mutex_init(&port[i]->lock); - INIT_LIST_HEAD(&hsi->port[i]->clients); - spin_lock_init(&hsi->port[i]->clock); + ATOMIC_INIT_NOTIFIER_HEAD(&port[i]->n_head); dev_set_name(&port[i]->device, "port%d", i); hsi->port[i]->device.release = hsi_port_release; device_initialize(&hsi->port[i]->device); @@ -420,37 +407,67 @@ void hsi_release_port(struct hsi_client *cl) } EXPORT_SYMBOL_GPL(hsi_release_port); -static int hsi_start_rx(struct hsi_client *cl, void *data __maybe_unused) +static int hsi_event_notifier_call(struct notifier_block *nb, + unsigned long event, void *data __maybe_unused) { - if (cl->hsi_start_rx) - (*cl->hsi_start_rx)(cl); + struct hsi_client *cl = container_of(nb, struct hsi_client, nb); + + (*cl->ehandler)(cl, event); return 0; } -static int hsi_stop_rx(struct hsi_client *cl, void *data __maybe_unused) +/** + * hsi_register_port_event - Register a client to receive port events + * @cl: HSI client that wants to receive port events + * @cb: Event handler callback + * + * Clients should register a callback to be able to receive + * events from the ports. Registration should happen after + * claiming the port. + * The handler can be called in interrupt context. + * + * Returns -errno on error, or 0 on success. + */ +int hsi_register_port_event(struct hsi_client *cl, + void (*handler)(struct hsi_client *, unsigned long)) { - if (cl->hsi_stop_rx) - (*cl->hsi_stop_rx)(cl); + struct hsi_port *port = hsi_get_port(cl); - return 0; + if (!handler || cl->ehandler) + return -EINVAL; + if (!hsi_port_claimed(cl)) + return -EACCES; + cl->ehandler = handler; + cl->nb.notifier_call = hsi_event_notifier_call; + + return atomic_notifier_chain_register(&port->n_head, &cl->nb); } +EXPORT_SYMBOL_GPL(hsi_register_port_event); -static int hsi_port_for_each_client(struct hsi_port *port, void *data, - int (*fn)(struct hsi_client *cl, void *data)) +/** + * hsi_unregister_port_event - Stop receiving port events for a client + * @cl: HSI client that wants to stop receiving port events + * + * Clients should call this function before releasing their associated + * port. + * + * Returns -errno on error, or 0 on success. + */ +int hsi_unregister_port_event(struct hsi_client *cl) { - struct hsi_client *cl; + struct hsi_port *port = hsi_get_port(cl); + int err; - spin_lock(&port->clock); - list_for_each_entry(cl, &port->clients, link) { - spin_unlock(&port->clock); - (*fn)(cl, data); - spin_lock(&port->clock); - } - spin_unlock(&port->clock); + WARN_ON(!hsi_port_claimed(cl)); - return 0; + err = atomic_notifier_chain_unregister(&port->n_head, &cl->nb); + if (!err) + cl->ehandler = NULL; + + return err; } +EXPORT_SYMBOL_GPL(hsi_unregister_port_event); /** * hsi_event -Notifies clients about port events @@ -464,22 +481,12 @@ static int hsi_port_for_each_client(struct hsi_port *port, void *data, * Events: * HSI_EVENT_START_RX - Incoming wake line high * HSI_EVENT_STOP_RX - Incoming wake line down + * + * Returns -errno on error, or 0 on success. */ -void hsi_event(struct hsi_port *port, unsigned int event) +int hsi_event(struct hsi_port *port, unsigned long event) { - int (*fn)(struct hsi_client *cl, void *data); - - switch (event) { - case HSI_EVENT_START_RX: - fn = hsi_start_rx; - break; - case HSI_EVENT_STOP_RX: - fn = hsi_stop_rx; - break; - default: - return; - } - hsi_port_for_each_client(port, NULL, fn); + return atomic_notifier_call_chain(&port->n_head, event, NULL); } EXPORT_SYMBOL_GPL(hsi_event); diff --git a/include/linux/hsi/hsi.h b/include/linux/hsi/hsi.h index 7f3b7262a2b..56fae865e27 100644 --- a/include/linux/hsi/hsi.h +++ b/include/linux/hsi/hsi.h @@ -26,9 +26,9 @@ #include #include #include -#include #include #include +#include /* HSI message ttype */ #define HSI_MSG_READ 0 @@ -121,18 +121,18 @@ static inline int hsi_register_board_info(struct hsi_board_info const *info, * @device: Driver model representation of the device * @tx_cfg: HSI TX configuration * @rx_cfg: HSI RX configuration - * @hsi_start_rx: Called after incoming wake line goes high - * @hsi_stop_rx: Called after incoming wake line goes low + * @e_handler: Callback for handling port events (RX Wake High/Low) + * @pclaimed: Keeps tracks if the clients claimed its associated HSI port + * @nb: Notifier block for port events */ struct hsi_client { struct device device; struct hsi_config tx_cfg; struct hsi_config rx_cfg; - void (*hsi_start_rx)(struct hsi_client *cl); - void (*hsi_stop_rx)(struct hsi_client *cl); /* private: */ + void (*ehandler)(struct hsi_client *, unsigned long); unsigned int pclaimed:1; - struct list_head link; + struct notifier_block nb; }; #define to_hsi_client(dev) container_of(dev, struct hsi_client, device) @@ -147,6 +147,10 @@ static inline void *hsi_client_drvdata(struct hsi_client *cl) return dev_get_drvdata(&cl->device); } +int hsi_register_port_event(struct hsi_client *cl, + void (*handler)(struct hsi_client *, unsigned long)); +int hsi_unregister_port_event(struct hsi_client *cl); + /** * struct hsi_client_driver - Driver associated to an HSI client * @driver: Driver model representation of the driver @@ -214,8 +218,7 @@ void hsi_free_msg(struct hsi_msg *msg); * @start_tx: Callback to inform that a client wants to TX data * @stop_tx: Callback to inform that a client no longer wishes to TX data * @release: Callback to inform that a client no longer uses the port - * @clients: List of hsi_clients using the port. - * @clock: Lock to serialize access to the clients list. + * @n_head: Notifier chain for signaling port events to the clients. */ struct hsi_port { struct device device; @@ -231,14 +234,14 @@ struct hsi_port { int (*start_tx)(struct hsi_client *cl); int (*stop_tx)(struct hsi_client *cl); int (*release)(struct hsi_client *cl); - struct list_head clients; - spinlock_t clock; + /* private */ + struct atomic_notifier_head n_head; }; #define to_hsi_port(dev) container_of(dev, struct hsi_port, device) #define hsi_get_port(cl) to_hsi_port((cl)->device.parent) -void hsi_event(struct hsi_port *port, unsigned int event); +int hsi_event(struct hsi_port *port, unsigned long event); int hsi_claim_port(struct hsi_client *cl, unsigned int share); void hsi_release_port(struct hsi_client *cl); -- cgit v1.2.3-18-g5258 From fdadb6e9a5cf65c7662b2ca817856f187d05ab7d Mon Sep 17 00:00:00 2001 From: Carlos Chinea Date: Fri, 13 Apr 2012 16:03:03 +0300 Subject: HSI: hsi_char: Remove max_data_size from sysfs Remove max_data_size sysfs entry. Otherwise is possible to have a buffer overrun if its value is increased after the device is open. Signed-off-by: Carlos Chinea Acked-by: Greg Kroah-Hartman Acked-by: Linus Walleij --- drivers/hsi/clients/hsi_char.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hsi/clients/hsi_char.c b/drivers/hsi/clients/hsi_char.c index 88a050df238..3ad91f6447d 100644 --- a/drivers/hsi/clients/hsi_char.c +++ b/drivers/hsi/clients/hsi_char.c @@ -123,7 +123,7 @@ struct hsc_client_data { static unsigned int hsc_major; /* Maximum buffer size that hsi_char will accept from userspace */ static unsigned int max_data_size = 0x1000; -module_param(max_data_size, uint, S_IRUSR | S_IWUSR); +module_param(max_data_size, uint, 0); MODULE_PARM_DESC(max_data_size, "max read/write data size [4,8..65536] (^2)"); static void hsc_add_tail(struct hsc_channel *channel, struct hsi_msg *msg, -- cgit v1.2.3-18-g5258 From 24b7099af71232b7568acd74770e6eb8f174f5d6 Mon Sep 17 00:00:00 2001 From: Carlos Chinea Date: Fri, 13 Apr 2012 15:55:13 +0300 Subject: HSI: Add HSI ABI documentation Adds sysfs HSI framework documentation Signed-off-by: Carlos Chinea Acked-by: Greg Kroah-Hartman Acked-by: Linus Walleij --- Documentation/ABI/testing/sysfs-bus-hsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-hsi diff --git a/Documentation/ABI/testing/sysfs-bus-hsi b/Documentation/ABI/testing/sysfs-bus-hsi new file mode 100644 index 00000000000..1b1b282a99e --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-hsi @@ -0,0 +1,19 @@ +What: /sys/bus/hsi +Date: April 2012 +KernelVersion: 3.4 +Contact: Carlos Chinea +Description: + High Speed Synchronous Serial Interface (HSI) is a + serial interface mainly used for connecting application + engines (APE) with cellular modem engines (CMT) in cellular + handsets. + The bus will be populated with devices (hsi_clients) representing + the protocols available in the system. Bus drivers implement + those protocols. + +What: /sys/bus/hsi/devices/.../modalias +Date: April 2012 +KernelVersion: 3.4 +Contact: Carlos Chinea +Description: Stores the same MODALIAS value emitted by uevent + Format: hsi: -- cgit v1.2.3-18-g5258 From 887ea3db26ec8a43b650ada273e1159492939c10 Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Mon, 23 Apr 2012 19:36:39 +0900 Subject: drm/exynos: fixed duplicatd memory allocation bug. the gem was already allocated at gem allocation time but is allocated at page fault handler so this patch fixes the problem that gem was allocated one more time. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/exynos_drm_gem.c | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.c b/drivers/gpu/drm/exynos/exynos_drm_gem.c index 26d51979116..b1850c30e04 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gem.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gem.c @@ -712,7 +712,6 @@ int exynos_drm_gem_dumb_destroy(struct drm_file *file_priv, int exynos_drm_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) { struct drm_gem_object *obj = vma->vm_private_data; - struct exynos_drm_gem_obj *exynos_gem_obj = to_exynos_gem_obj(obj); struct drm_device *dev = obj->dev; unsigned long f_vaddr; pgoff_t page_offset; @@ -724,21 +723,10 @@ int exynos_drm_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) mutex_lock(&dev->struct_mutex); - /* - * allocate all pages as desired size if user wants to allocate - * physically non-continuous memory. - */ - if (exynos_gem_obj->flags & EXYNOS_BO_NONCONTIG) { - ret = exynos_drm_gem_get_pages(obj); - if (ret < 0) - goto err; - } - ret = exynos_drm_gem_map_pages(obj, vma, f_vaddr, page_offset); if (ret < 0) DRM_ERROR("failed to map pages.\n"); -err: mutex_unlock(&dev->struct_mutex); return convert_to_vm_err_msg(ret); -- cgit v1.2.3-18-g5258 From f6ead8dea518d0d02c576432eba4fa145e64b02a Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Mon, 23 Apr 2012 19:41:14 +0900 Subject: drm/exynos: fixed exynos_drm_gem_map_pages bug. this patch fixes the problem that the physical memory region to be mapped to user space could be exceeded. if page fault address was placed at between buffer start and end then memory region to be mapped would be exceeded. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/exynos_drm_gem.c | 16 +++------------- 1 file changed, 3 insertions(+), 13 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.c b/drivers/gpu/drm/exynos/exynos_drm_gem.c index b1850c30e04..f09d292a2e3 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gem.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gem.c @@ -149,22 +149,12 @@ static int exynos_drm_gem_map_pages(struct drm_gem_object *obj, unsigned long pfn; if (exynos_gem_obj->flags & EXYNOS_BO_NONCONTIG) { - unsigned long usize = buf->size; - if (!buf->pages) return -EINTR; - while (usize > 0) { - pfn = page_to_pfn(buf->pages[page_offset++]); - vm_insert_mixed(vma, f_vaddr, pfn); - f_vaddr += PAGE_SIZE; - usize -= PAGE_SIZE; - } - - return 0; - } - - pfn = (buf->dma_addr >> PAGE_SHIFT) + page_offset; + pfn = page_to_pfn(buf->pages[page_offset++]); + } else + pfn = (buf->dma_addr >> PAGE_SHIFT) + page_offset; return vm_insert_mixed(vma, f_vaddr, pfn); } -- cgit v1.2.3-18-g5258 From 818c4ea7c589c521912430ea54e0c0a0671b2c6d Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Mon, 23 Apr 2012 19:47:18 +0900 Subject: drm/exynos: added missed vm area region mapping type. with this patch, if the memory region is physically non-continuous then VM_MIXEDMAP is set to vm->vm_flags otherwise VM_PFNMAP. we had missed this flag setting. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/exynos_drm_gem.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.c b/drivers/gpu/drm/exynos/exynos_drm_gem.c index f09d292a2e3..01139c81395 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gem.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gem.c @@ -514,6 +514,8 @@ static int exynos_drm_gem_mmap_buffer(struct file *filp, if (!buffer->pages) return -EINVAL; + vma->vm_flags |= VM_MIXEDMAP; + do { ret = vm_insert_page(vma, uaddr, buffer->pages[i++]); if (ret) { -- cgit v1.2.3-18-g5258 From 1a38336b8611a04f0a624330c1f815421f4bf5f4 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 12 Apr 2012 19:47:11 +0100 Subject: ASoC: wm8994: Improve sequencing of AIF channel enables This ensures a clean startup of the channels, without this change some use cases could result in issues in a small proportion of cases. Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/wm8994.c | 276 +++++++++++++++++++++++++++++++++++++--------- 1 file changed, 222 insertions(+), 54 deletions(-) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 7c49642af05..6c1fe3afd4b 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -1000,61 +1000,170 @@ static void wm8994_update_class_w(struct snd_soc_codec *codec) } } -static int late_enable_ev(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *kcontrol, int event) +static int aif1clk_ev(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) { struct snd_soc_codec *codec = w->codec; - struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); + struct wm8994 *control = codec->control_data; + int mask = WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA; + int dac; + int adc; + int val; + + switch (control->type) { + case WM8994: + case WM8958: + mask |= WM8994_AIF1DAC2L_ENA | WM8994_AIF1DAC2R_ENA; + break; + default: + break; + } switch (event) { case SND_SOC_DAPM_PRE_PMU: - if (wm8994->aif1clk_enable) { - snd_soc_update_bits(codec, WM8994_AIF1_CLOCKING_1, - WM8994_AIF1CLK_ENA_MASK, - WM8994_AIF1CLK_ENA); - wm8994->aif1clk_enable = 0; - } - if (wm8994->aif2clk_enable) { - snd_soc_update_bits(codec, WM8994_AIF2_CLOCKING_1, - WM8994_AIF2CLK_ENA_MASK, - WM8994_AIF2CLK_ENA); - wm8994->aif2clk_enable = 0; - } + val = snd_soc_read(codec, WM8994_AIF1_CONTROL_1); + if ((val & WM8994_AIF1ADCL_SRC) && + (val & WM8994_AIF1ADCR_SRC)) + adc = WM8994_AIF1ADC1R_ENA | WM8994_AIF1ADC2R_ENA; + else if (!(val & WM8994_AIF1ADCL_SRC) && + !(val & WM8994_AIF1ADCR_SRC)) + adc = WM8994_AIF1ADC1L_ENA | WM8994_AIF1ADC2L_ENA; + else + adc = WM8994_AIF1ADC1R_ENA | WM8994_AIF1ADC2R_ENA | + WM8994_AIF1ADC1L_ENA | WM8994_AIF1ADC2L_ENA; + + val = snd_soc_read(codec, WM8994_AIF1_CONTROL_2); + if ((val & WM8994_AIF1DACL_SRC) && + (val & WM8994_AIF1DACR_SRC)) + dac = WM8994_AIF1DAC1R_ENA | WM8994_AIF1DAC2R_ENA; + else if (!(val & WM8994_AIF1DACL_SRC) && + !(val & WM8994_AIF1DACR_SRC)) + dac = WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC2L_ENA; + else + dac = WM8994_AIF1DAC1R_ENA | WM8994_AIF1DAC2R_ENA | + WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC2L_ENA; + + snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_4, + mask, adc); + snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_5, + mask, dac); + snd_soc_update_bits(codec, WM8994_CLOCKING_1, + WM8994_AIF1DSPCLK_ENA | + WM8994_SYSDSPCLK_ENA, + WM8994_AIF1DSPCLK_ENA | + WM8994_SYSDSPCLK_ENA); + snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_4, mask, + WM8994_AIF1ADC1R_ENA | + WM8994_AIF1ADC1L_ENA | + WM8994_AIF1ADC2R_ENA | + WM8994_AIF1ADC2L_ENA); + snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_5, mask, + WM8994_AIF1DAC1R_ENA | + WM8994_AIF1DAC1L_ENA | + WM8994_AIF1DAC2R_ENA | + WM8994_AIF1DAC2L_ENA); break; - } - /* We may also have postponed startup of DSP, handle that. */ - wm8958_aif_ev(w, kcontrol, event); + case SND_SOC_DAPM_PRE_PMD: + case SND_SOC_DAPM_POST_PMD: + snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_5, + mask, 0); + snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_4, + mask, 0); + + val = snd_soc_read(codec, WM8994_CLOCKING_1); + if (val & WM8994_AIF2DSPCLK_ENA) + val = WM8994_SYSDSPCLK_ENA; + else + val = 0; + snd_soc_update_bits(codec, WM8994_CLOCKING_1, + WM8994_SYSDSPCLK_ENA | + WM8994_AIF1DSPCLK_ENA, val); + break; + } return 0; } -static int late_disable_ev(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *kcontrol, int event) +static int aif2clk_ev(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) { struct snd_soc_codec *codec = w->codec; - struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); + int dac; + int adc; + int val; switch (event) { + case SND_SOC_DAPM_PRE_PMU: + val = snd_soc_read(codec, WM8994_AIF2_CONTROL_1); + if ((val & WM8994_AIF2ADCL_SRC) && + (val & WM8994_AIF2ADCR_SRC)) + adc = WM8994_AIF2ADCR_ENA; + else if (!(val & WM8994_AIF2ADCL_SRC) && + !(val & WM8994_AIF2ADCR_SRC)) + adc = WM8994_AIF2ADCL_ENA; + else + adc = WM8994_AIF2ADCL_ENA | WM8994_AIF2ADCR_ENA; + + + val = snd_soc_read(codec, WM8994_AIF2_CONTROL_2); + if ((val & WM8994_AIF2DACL_SRC) && + (val & WM8994_AIF2DACR_SRC)) + dac = WM8994_AIF2DACR_ENA; + else if (!(val & WM8994_AIF2DACL_SRC) && + !(val & WM8994_AIF2DACR_SRC)) + dac = WM8994_AIF2DACL_ENA; + else + dac = WM8994_AIF2DACL_ENA | WM8994_AIF2DACR_ENA; + + snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_4, + WM8994_AIF2ADCL_ENA | + WM8994_AIF2ADCR_ENA, adc); + snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_5, + WM8994_AIF2DACL_ENA | + WM8994_AIF2DACR_ENA, dac); + snd_soc_update_bits(codec, WM8994_CLOCKING_1, + WM8994_AIF2DSPCLK_ENA | + WM8994_SYSDSPCLK_ENA, + WM8994_AIF2DSPCLK_ENA | + WM8994_SYSDSPCLK_ENA); + snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_4, + WM8994_AIF2ADCL_ENA | + WM8994_AIF2ADCR_ENA, + WM8994_AIF2ADCL_ENA | + WM8994_AIF2ADCR_ENA); + snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_5, + WM8994_AIF2DACL_ENA | + WM8994_AIF2DACR_ENA, + WM8994_AIF2DACL_ENA | + WM8994_AIF2DACR_ENA); + break; + + case SND_SOC_DAPM_PRE_PMD: case SND_SOC_DAPM_POST_PMD: - if (wm8994->aif1clk_disable) { - snd_soc_update_bits(codec, WM8994_AIF1_CLOCKING_1, - WM8994_AIF1CLK_ENA_MASK, 0); - wm8994->aif1clk_disable = 0; - } - if (wm8994->aif2clk_disable) { - snd_soc_update_bits(codec, WM8994_AIF2_CLOCKING_1, - WM8994_AIF2CLK_ENA_MASK, 0); - wm8994->aif2clk_disable = 0; - } + snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_5, + WM8994_AIF2DACL_ENA | + WM8994_AIF2DACR_ENA, 0); + snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_5, + WM8994_AIF2ADCL_ENA | + WM8994_AIF2ADCR_ENA, 0); + + val = snd_soc_read(codec, WM8994_CLOCKING_1); + if (val & WM8994_AIF1DSPCLK_ENA) + val = WM8994_SYSDSPCLK_ENA; + else + val = 0; + snd_soc_update_bits(codec, WM8994_CLOCKING_1, + WM8994_SYSDSPCLK_ENA | + WM8994_AIF2DSPCLK_ENA, val); break; } return 0; } -static int aif1clk_ev(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *kcontrol, int event) +static int aif1clk_late_ev(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) { struct snd_soc_codec *codec = w->codec; struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); @@ -1071,8 +1180,8 @@ static int aif1clk_ev(struct snd_soc_dapm_widget *w, return 0; } -static int aif2clk_ev(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *kcontrol, int event) +static int aif2clk_late_ev(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) { struct snd_soc_codec *codec = w->codec; struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); @@ -1089,6 +1198,63 @@ static int aif2clk_ev(struct snd_soc_dapm_widget *w, return 0; } +static int late_enable_ev(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + if (wm8994->aif1clk_enable) { + aif1clk_ev(w, kcontrol, event); + snd_soc_update_bits(codec, WM8994_AIF1_CLOCKING_1, + WM8994_AIF1CLK_ENA_MASK, + WM8994_AIF1CLK_ENA); + wm8994->aif1clk_enable = 0; + } + if (wm8994->aif2clk_enable) { + aif2clk_ev(w, kcontrol, event); + snd_soc_update_bits(codec, WM8994_AIF2_CLOCKING_1, + WM8994_AIF2CLK_ENA_MASK, + WM8994_AIF2CLK_ENA); + wm8994->aif2clk_enable = 0; + } + break; + } + + /* We may also have postponed startup of DSP, handle that. */ + wm8958_aif_ev(w, kcontrol, event); + + return 0; +} + +static int late_disable_ev(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); + + switch (event) { + case SND_SOC_DAPM_POST_PMD: + if (wm8994->aif1clk_disable) { + snd_soc_update_bits(codec, WM8994_AIF1_CLOCKING_1, + WM8994_AIF1CLK_ENA_MASK, 0); + aif1clk_ev(w, kcontrol, event); + wm8994->aif1clk_disable = 0; + } + if (wm8994->aif2clk_disable) { + snd_soc_update_bits(codec, WM8994_AIF2_CLOCKING_1, + WM8994_AIF2CLK_ENA_MASK, 0); + aif2clk_ev(w, kcontrol, event); + wm8994->aif2clk_disable = 0; + } + break; + } + + return 0; +} + static int adc_mux_ev(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { @@ -1385,9 +1551,9 @@ static const struct snd_kcontrol_new aif2dacr_src_mux = SOC_DAPM_ENUM("AIF2DACR Mux", aif2dacr_src_enum); static const struct snd_soc_dapm_widget wm8994_lateclk_revd_widgets[] = { -SND_SOC_DAPM_SUPPLY("AIF1CLK", SND_SOC_NOPM, 0, 0, aif1clk_ev, +SND_SOC_DAPM_SUPPLY("AIF1CLK", SND_SOC_NOPM, 0, 0, aif1clk_late_ev, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), -SND_SOC_DAPM_SUPPLY("AIF2CLK", SND_SOC_NOPM, 0, 0, aif2clk_ev, +SND_SOC_DAPM_SUPPLY("AIF2CLK", SND_SOC_NOPM, 0, 0, aif2clk_late_ev, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), SND_SOC_DAPM_PGA_E("Late DAC1L Enable PGA", SND_SOC_NOPM, 0, 0, NULL, 0, @@ -1416,8 +1582,10 @@ SND_SOC_DAPM_POST("Late Disable PGA", late_disable_ev) }; static const struct snd_soc_dapm_widget wm8994_lateclk_widgets[] = { -SND_SOC_DAPM_SUPPLY("AIF1CLK", WM8994_AIF1_CLOCKING_1, 0, 0, NULL, 0), -SND_SOC_DAPM_SUPPLY("AIF2CLK", WM8994_AIF2_CLOCKING_1, 0, 0, NULL, 0), +SND_SOC_DAPM_SUPPLY("AIF1CLK", WM8994_AIF1_CLOCKING_1, 0, 0, aif1clk_ev, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), +SND_SOC_DAPM_SUPPLY("AIF2CLK", WM8994_AIF2_CLOCKING_1, 0, 0, aif2clk_ev, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), SND_SOC_DAPM_PGA("Direct Voice", SND_SOC_NOPM, 0, 0, NULL, 0), SND_SOC_DAPM_MIXER("SPKL", WM8994_POWER_MANAGEMENT_3, 8, 0, left_speaker_mixer, ARRAY_SIZE(left_speaker_mixer)), @@ -1470,30 +1638,30 @@ SND_SOC_DAPM_SUPPLY("VMID", SND_SOC_NOPM, 0, 0, vmid_event, SND_SOC_DAPM_SUPPLY("CLK_SYS", SND_SOC_NOPM, 0, 0, clk_sys_event, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), -SND_SOC_DAPM_SUPPLY("DSP1CLK", WM8994_CLOCKING_1, 3, 0, NULL, 0), -SND_SOC_DAPM_SUPPLY("DSP2CLK", WM8994_CLOCKING_1, 2, 0, NULL, 0), -SND_SOC_DAPM_SUPPLY("DSPINTCLK", WM8994_CLOCKING_1, 1, 0, NULL, 0), +SND_SOC_DAPM_SUPPLY("DSP1CLK", SND_SOC_NOPM, 3, 0, NULL, 0), +SND_SOC_DAPM_SUPPLY("DSP2CLK", SND_SOC_NOPM, 2, 0, NULL, 0), +SND_SOC_DAPM_SUPPLY("DSPINTCLK", SND_SOC_NOPM, 1, 0, NULL, 0), SND_SOC_DAPM_AIF_OUT("AIF1ADC1L", NULL, - 0, WM8994_POWER_MANAGEMENT_4, 9, 0), + 0, SND_SOC_NOPM, 9, 0), SND_SOC_DAPM_AIF_OUT("AIF1ADC1R", NULL, - 0, WM8994_POWER_MANAGEMENT_4, 8, 0), + 0, SND_SOC_NOPM, 8, 0), SND_SOC_DAPM_AIF_IN_E("AIF1DAC1L", NULL, 0, - WM8994_POWER_MANAGEMENT_5, 9, 0, wm8958_aif_ev, + SND_SOC_NOPM, 9, 0, wm8958_aif_ev, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), SND_SOC_DAPM_AIF_IN_E("AIF1DAC1R", NULL, 0, - WM8994_POWER_MANAGEMENT_5, 8, 0, wm8958_aif_ev, + SND_SOC_NOPM, 8, 0, wm8958_aif_ev, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), SND_SOC_DAPM_AIF_OUT("AIF1ADC2L", NULL, - 0, WM8994_POWER_MANAGEMENT_4, 11, 0), + 0, SND_SOC_NOPM, 11, 0), SND_SOC_DAPM_AIF_OUT("AIF1ADC2R", NULL, - 0, WM8994_POWER_MANAGEMENT_4, 10, 0), + 0, SND_SOC_NOPM, 10, 0), SND_SOC_DAPM_AIF_IN_E("AIF1DAC2L", NULL, 0, - WM8994_POWER_MANAGEMENT_5, 11, 0, wm8958_aif_ev, + SND_SOC_NOPM, 11, 0, wm8958_aif_ev, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), SND_SOC_DAPM_AIF_IN_E("AIF1DAC2R", NULL, 0, - WM8994_POWER_MANAGEMENT_5, 10, 0, wm8958_aif_ev, + SND_SOC_NOPM, 10, 0, wm8958_aif_ev, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), SND_SOC_DAPM_MIXER("AIF1ADC1L Mixer", SND_SOC_NOPM, 0, 0, @@ -1520,14 +1688,14 @@ SND_SOC_DAPM_MIXER("DAC1R Mixer", SND_SOC_NOPM, 0, 0, dac1r_mix, ARRAY_SIZE(dac1r_mix)), SND_SOC_DAPM_AIF_OUT("AIF2ADCL", NULL, 0, - WM8994_POWER_MANAGEMENT_4, 13, 0), + SND_SOC_NOPM, 13, 0), SND_SOC_DAPM_AIF_OUT("AIF2ADCR", NULL, 0, - WM8994_POWER_MANAGEMENT_4, 12, 0), + SND_SOC_NOPM, 12, 0), SND_SOC_DAPM_AIF_IN_E("AIF2DACL", NULL, 0, - WM8994_POWER_MANAGEMENT_5, 13, 0, wm8958_aif_ev, + SND_SOC_NOPM, 13, 0, wm8958_aif_ev, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), SND_SOC_DAPM_AIF_IN_E("AIF2DACR", NULL, 0, - WM8994_POWER_MANAGEMENT_5, 12, 0, wm8958_aif_ev, + SND_SOC_NOPM, 12, 0, wm8958_aif_ev, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), SND_SOC_DAPM_AIF_IN("AIF1DACDAT", NULL, 0, SND_SOC_NOPM, 0, 0), -- cgit v1.2.3-18-g5258 From 1bdae6f49c52af3a58998cdb051dbd5b942f9273 Mon Sep 17 00:00:00 2001 From: Narayanan G Date: Thu, 9 Feb 2012 12:41:37 +0530 Subject: dma40: Improve the logic of stopping logical chan can be directly stopped by issuing a SUSPEND_REQ on the EE bits. There is no need to suspend the physical channel and restart it. Also, the support for pre-V2 hw is discontinued. EE bits for writing: 00: disable only if AS=11 or AS=00 01: enable 10: suspend_req only if AS=01 & EE=01 or EE=11 11: round / no change for writing Signed-off-by: Narayanan G Acked-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/ste_dma40.c | 320 ++++++++++++++++++++++++++++----------------- drivers/dma/ste_dma40_ll.h | 2 - 2 files changed, 199 insertions(+), 123 deletions(-) diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index bdd41d4bfa8..c5f26cc2c27 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -68,6 +68,22 @@ enum d40_command { D40_DMA_SUSPENDED = 3 }; +/* + * enum d40_events - The different Event Enables for the event lines. + * + * @D40_DEACTIVATE_EVENTLINE: De-activate Event line, stopping the logical chan. + * @D40_ACTIVATE_EVENTLINE: Activate the Event line, to start a logical chan. + * @D40_SUSPEND_REQ_EVENTLINE: Requesting for suspending a event line. + * @D40_ROUND_EVENTLINE: Status check for event line. + */ + +enum d40_events { + D40_DEACTIVATE_EVENTLINE = 0, + D40_ACTIVATE_EVENTLINE = 1, + D40_SUSPEND_REQ_EVENTLINE = 2, + D40_ROUND_EVENTLINE = 3 +}; + /* * These are the registers that has to be saved and later restored * when the DMA hw is powered off. @@ -870,8 +886,8 @@ static void d40_save_restore_registers(struct d40_base *base, bool save) } #endif -static int d40_channel_execute_command(struct d40_chan *d40c, - enum d40_command command) +static int __d40_execute_command_phy(struct d40_chan *d40c, + enum d40_command command) { u32 status; int i; @@ -880,6 +896,12 @@ static int d40_channel_execute_command(struct d40_chan *d40c, unsigned long flags; u32 wmask; + if (command == D40_DMA_STOP) { + ret = __d40_execute_command_phy(d40c, D40_DMA_SUSPEND_REQ); + if (ret) + return ret; + } + spin_lock_irqsave(&d40c->base->execmd_lock, flags); if (d40c->phy_chan->num % 2 == 0) @@ -973,67 +995,109 @@ static void d40_term_all(struct d40_chan *d40c) } d40c->pending_tx = 0; - d40c->busy = false; } -static void __d40_config_set_event(struct d40_chan *d40c, bool enable, - u32 event, int reg) +static void __d40_config_set_event(struct d40_chan *d40c, + enum d40_events event_type, u32 event, + int reg) { void __iomem *addr = chan_base(d40c) + reg; int tries; + u32 status; + + switch (event_type) { + + case D40_DEACTIVATE_EVENTLINE: - if (!enable) { writel((D40_DEACTIVATE_EVENTLINE << D40_EVENTLINE_POS(event)) | ~D40_EVENTLINE_MASK(event), addr); - return; - } + break; + + case D40_SUSPEND_REQ_EVENTLINE: + status = (readl(addr) & D40_EVENTLINE_MASK(event)) >> + D40_EVENTLINE_POS(event); + + if (status == D40_DEACTIVATE_EVENTLINE || + status == D40_SUSPEND_REQ_EVENTLINE) + break; + writel((D40_SUSPEND_REQ_EVENTLINE << D40_EVENTLINE_POS(event)) + | ~D40_EVENTLINE_MASK(event), addr); + + for (tries = 0 ; tries < D40_SUSPEND_MAX_IT; tries++) { + + status = (readl(addr) & D40_EVENTLINE_MASK(event)) >> + D40_EVENTLINE_POS(event); + + cpu_relax(); + /* + * Reduce the number of bus accesses while + * waiting for the DMA to suspend. + */ + udelay(3); + + if (status == D40_DEACTIVATE_EVENTLINE) + break; + } + + if (tries == D40_SUSPEND_MAX_IT) { + chan_err(d40c, + "unable to stop the event_line chl %d (log: %d)" + "status %x\n", d40c->phy_chan->num, + d40c->log_num, status); + } + break; + + case D40_ACTIVATE_EVENTLINE: /* * The hardware sometimes doesn't register the enable when src and dst * event lines are active on the same logical channel. Retry to ensure * it does. Usually only one retry is sufficient. */ - tries = 100; - while (--tries) { - writel((D40_ACTIVATE_EVENTLINE << D40_EVENTLINE_POS(event)) - | ~D40_EVENTLINE_MASK(event), addr); + tries = 100; + while (--tries) { + writel((D40_ACTIVATE_EVENTLINE << + D40_EVENTLINE_POS(event)) | + ~D40_EVENTLINE_MASK(event), addr); - if (readl(addr) & D40_EVENTLINE_MASK(event)) - break; - } + if (readl(addr) & D40_EVENTLINE_MASK(event)) + break; + } - if (tries != 99) - dev_dbg(chan2dev(d40c), - "[%s] workaround enable S%cLNK (%d tries)\n", - __func__, reg == D40_CHAN_REG_SSLNK ? 'S' : 'D', - 100 - tries); + if (tries != 99) + dev_dbg(chan2dev(d40c), + "[%s] workaround enable S%cLNK (%d tries)\n", + __func__, reg == D40_CHAN_REG_SSLNK ? 'S' : 'D', + 100 - tries); - WARN_ON(!tries); -} + WARN_ON(!tries); + break; -static void d40_config_set_event(struct d40_chan *d40c, bool do_enable) -{ - unsigned long flags; + case D40_ROUND_EVENTLINE: + BUG(); + break; - spin_lock_irqsave(&d40c->phy_chan->lock, flags); + } +} +static void d40_config_set_event(struct d40_chan *d40c, + enum d40_events event_type) +{ /* Enable event line connected to device (or memcpy) */ if ((d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) || (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_PERIPH)) { u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.src_dev_type); - __d40_config_set_event(d40c, do_enable, event, + __d40_config_set_event(d40c, event_type, event, D40_CHAN_REG_SSLNK); } if (d40c->dma_cfg.dir != STEDMA40_PERIPH_TO_MEM) { u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dst_dev_type); - __d40_config_set_event(d40c, do_enable, event, + __d40_config_set_event(d40c, event_type, event, D40_CHAN_REG_SDLNK); } - - spin_unlock_irqrestore(&d40c->phy_chan->lock, flags); } static u32 d40_chan_has_events(struct d40_chan *d40c) @@ -1047,6 +1111,64 @@ static u32 d40_chan_has_events(struct d40_chan *d40c) return val; } +static int +__d40_execute_command_log(struct d40_chan *d40c, enum d40_command command) +{ + unsigned long flags; + int ret = 0; + u32 active_status; + void __iomem *active_reg; + + if (d40c->phy_chan->num % 2 == 0) + active_reg = d40c->base->virtbase + D40_DREG_ACTIVE; + else + active_reg = d40c->base->virtbase + D40_DREG_ACTIVO; + + + spin_lock_irqsave(&d40c->phy_chan->lock, flags); + + switch (command) { + case D40_DMA_STOP: + case D40_DMA_SUSPEND_REQ: + + active_status = (readl(active_reg) & + D40_CHAN_POS_MASK(d40c->phy_chan->num)) >> + D40_CHAN_POS(d40c->phy_chan->num); + + if (active_status == D40_DMA_RUN) + d40_config_set_event(d40c, D40_SUSPEND_REQ_EVENTLINE); + else + d40_config_set_event(d40c, D40_DEACTIVATE_EVENTLINE); + + if (!d40_chan_has_events(d40c) && (command == D40_DMA_STOP)) + ret = __d40_execute_command_phy(d40c, command); + + break; + + case D40_DMA_RUN: + + d40_config_set_event(d40c, D40_ACTIVATE_EVENTLINE); + ret = __d40_execute_command_phy(d40c, command); + break; + + case D40_DMA_SUSPENDED: + BUG(); + break; + } + + spin_unlock_irqrestore(&d40c->phy_chan->lock, flags); + return ret; +} + +static int d40_channel_execute_command(struct d40_chan *d40c, + enum d40_command command) +{ + if (chan_is_logical(d40c)) + return __d40_execute_command_log(d40c, command); + else + return __d40_execute_command_phy(d40c, command); +} + static u32 d40_get_prmo(struct d40_chan *d40c) { static const unsigned int phy_map[] = { @@ -1149,15 +1271,7 @@ static int d40_pause(struct d40_chan *d40c) spin_lock_irqsave(&d40c->lock, flags); res = d40_channel_execute_command(d40c, D40_DMA_SUSPEND_REQ); - if (res == 0) { - if (chan_is_logical(d40c)) { - d40_config_set_event(d40c, false); - /* Resume the other logical channels if any */ - if (d40_chan_has_events(d40c)) - res = d40_channel_execute_command(d40c, - D40_DMA_RUN); - } - } + pm_runtime_mark_last_busy(d40c->base->dev); pm_runtime_put_autosuspend(d40c->base->dev); spin_unlock_irqrestore(&d40c->lock, flags); @@ -1174,45 +1288,17 @@ static int d40_resume(struct d40_chan *d40c) spin_lock_irqsave(&d40c->lock, flags); pm_runtime_get_sync(d40c->base->dev); - if (d40c->base->rev == 0) - if (chan_is_logical(d40c)) { - res = d40_channel_execute_command(d40c, - D40_DMA_SUSPEND_REQ); - goto no_suspend; - } /* If bytes left to transfer or linked tx resume job */ - if (d40_residue(d40c) || d40_tx_is_linked(d40c)) { - - if (chan_is_logical(d40c)) - d40_config_set_event(d40c, true); - + if (d40_residue(d40c) || d40_tx_is_linked(d40c)) res = d40_channel_execute_command(d40c, D40_DMA_RUN); - } -no_suspend: pm_runtime_mark_last_busy(d40c->base->dev); pm_runtime_put_autosuspend(d40c->base->dev); spin_unlock_irqrestore(&d40c->lock, flags); return res; } -static int d40_terminate_all(struct d40_chan *chan) -{ - unsigned long flags; - int ret = 0; - - ret = d40_pause(chan); - if (!ret && chan_is_physical(chan)) - ret = d40_channel_execute_command(chan, D40_DMA_STOP); - - spin_lock_irqsave(&chan->lock, flags); - d40_term_all(chan); - spin_unlock_irqrestore(&chan->lock, flags); - - return ret; -} - static dma_cookie_t d40_tx_submit(struct dma_async_tx_descriptor *tx) { struct d40_chan *d40c = container_of(tx->chan, @@ -1232,20 +1318,6 @@ static dma_cookie_t d40_tx_submit(struct dma_async_tx_descriptor *tx) static int d40_start(struct d40_chan *d40c) { - if (d40c->base->rev == 0) { - int err; - - if (chan_is_logical(d40c)) { - err = d40_channel_execute_command(d40c, - D40_DMA_SUSPEND_REQ); - if (err) - return err; - } - } - - if (chan_is_logical(d40c)) - d40_config_set_event(d40c, true); - return d40_channel_execute_command(d40c, D40_DMA_RUN); } @@ -1258,10 +1330,10 @@ static struct d40_desc *d40_queue_start(struct d40_chan *d40c) d40d = d40_first_queued(d40c); if (d40d != NULL) { - if (!d40c->busy) + if (!d40c->busy) { d40c->busy = true; - - pm_runtime_get_sync(d40c->base->dev); + pm_runtime_get_sync(d40c->base->dev); + } /* Remove from queue */ d40_desc_remove(d40d); @@ -1388,8 +1460,8 @@ static void dma_tasklet(unsigned long data) return; - err: - /* Rescue manoeuvre if receiving double interrupts */ +err: + /* Rescue manouver if receiving double interrupts */ if (d40c->pending_tx > 0) d40c->pending_tx--; spin_unlock_irqrestore(&d40c->lock, flags); @@ -1770,7 +1842,6 @@ static int d40_config_memcpy(struct d40_chan *d40c) return 0; } - static int d40_free_dma(struct d40_chan *d40c) { @@ -1806,43 +1877,18 @@ static int d40_free_dma(struct d40_chan *d40c) } pm_runtime_get_sync(d40c->base->dev); - res = d40_channel_execute_command(d40c, D40_DMA_SUSPEND_REQ); + res = d40_channel_execute_command(d40c, D40_DMA_STOP); if (res) { - chan_err(d40c, "suspend failed\n"); + chan_err(d40c, "stop failed\n"); goto out; } - if (chan_is_logical(d40c)) { - /* Release logical channel, deactivate the event line */ + d40_alloc_mask_free(phy, is_src, chan_is_logical(d40c) ? event : 0); - d40_config_set_event(d40c, false); + if (chan_is_logical(d40c)) d40c->base->lookup_log_chans[d40c->log_num] = NULL; - - /* - * Check if there are more logical allocation - * on this phy channel. - */ - if (!d40_alloc_mask_free(phy, is_src, event)) { - /* Resume the other logical channels if any */ - if (d40_chan_has_events(d40c)) { - res = d40_channel_execute_command(d40c, - D40_DMA_RUN); - if (res) - chan_err(d40c, - "Executing RUN command\n"); - } - goto out; - } - } else { - (void) d40_alloc_mask_free(phy, is_src, 0); - } - - /* Release physical channel */ - res = d40_channel_execute_command(d40c, D40_DMA_STOP); - if (res) { - chan_err(d40c, "Failed to stop channel\n"); - goto out; - } + else + d40c->base->lookup_phy_chans[phy->num] = NULL; if (d40c->busy) { pm_runtime_mark_last_busy(d40c->base->dev); @@ -1852,7 +1898,6 @@ static int d40_free_dma(struct d40_chan *d40c) d40c->busy = false; d40c->phy_chan = NULL; d40c->configured = false; - d40c->base->lookup_phy_chans[phy->num] = NULL; out: pm_runtime_mark_last_busy(d40c->base->dev); @@ -2371,6 +2416,31 @@ static void d40_issue_pending(struct dma_chan *chan) spin_unlock_irqrestore(&d40c->lock, flags); } +static void d40_terminate_all(struct dma_chan *chan) +{ + unsigned long flags; + struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); + int ret; + + spin_lock_irqsave(&d40c->lock, flags); + + pm_runtime_get_sync(d40c->base->dev); + ret = d40_channel_execute_command(d40c, D40_DMA_STOP); + if (ret) + chan_err(d40c, "Failed to stop channel\n"); + + d40_term_all(d40c); + pm_runtime_mark_last_busy(d40c->base->dev); + pm_runtime_put_autosuspend(d40c->base->dev); + if (d40c->busy) { + pm_runtime_mark_last_busy(d40c->base->dev); + pm_runtime_put_autosuspend(d40c->base->dev); + } + d40c->busy = false; + + spin_unlock_irqrestore(&d40c->lock, flags); +} + static int dma40_config_to_halfchannel(struct d40_chan *d40c, struct stedma40_half_channel_info *info, @@ -2551,7 +2621,8 @@ static int d40_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, switch (cmd) { case DMA_TERMINATE_ALL: - return d40_terminate_all(d40c); + d40_terminate_all(chan); + return 0; case DMA_PAUSE: return d40_pause(d40c); case DMA_RESUME: @@ -2908,6 +2979,12 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev) dev_info(&pdev->dev, "hardware revision: %d @ 0x%x\n", rev, res->start); + if (rev < 2) { + d40_err(&pdev->dev, "hardware revision: %d is not supported", + rev); + goto failure; + } + plat_data = pdev->dev.platform_data; /* Count the number of logical channels in use */ @@ -2998,6 +3075,7 @@ failure: if (base) { kfree(base->lcla_pool.alloc_map); + kfree(base->reg_val_backup_chan); kfree(base->lookup_log_chans); kfree(base->lookup_phy_chans); kfree(base->phy_res); diff --git a/drivers/dma/ste_dma40_ll.h b/drivers/dma/ste_dma40_ll.h index 8d3d490968a..51e8e5396e9 100644 --- a/drivers/dma/ste_dma40_ll.h +++ b/drivers/dma/ste_dma40_ll.h @@ -62,8 +62,6 @@ #define D40_SREG_ELEM_LOG_LIDX_MASK (0xFF << D40_SREG_ELEM_LOG_LIDX_POS) /* Link register */ -#define D40_DEACTIVATE_EVENTLINE 0x0 -#define D40_ACTIVATE_EVENTLINE 0x1 #define D40_EVENTLINE_POS(i) (2 * i) #define D40_EVENTLINE_MASK(i) (0x3 << D40_EVENTLINE_POS(i)) -- cgit v1.2.3-18-g5258 From 15e4b78d7338a41b020d29dab7ac13a234ebe833 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 12 Apr 2012 18:12:43 +0200 Subject: dma/ste_dma40: explicitly include regulator consumer header The patch "ARM: amba: Remove AMBA level regulator support" breaks the DMA40 driver since the header implicitly included the regulator consumer header. So include it explicitly and fix the build error. Cc: Mark Brown Signed-off-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/ste_dma40.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index c5f26cc2c27..94170424ce2 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -18,6 +18,7 @@ #include #include #include +#include #include -- cgit v1.2.3-18-g5258 From 7e426da823fc7cd428b82ff2cf3615da24c73352 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 12 Apr 2012 18:12:52 +0200 Subject: dma/ste_dma40: fix erroneous comparison A small fallout from Vinod's conversions to dma_transfer_direction, this small comparison was done with a dma_data_direction instead. Fix it by comparing against the correct enum. Signed-off-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/ste_dma40.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index 94170424ce2..2ed1ac3513f 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -2116,7 +2116,7 @@ d40_prep_sg(struct dma_chan *dchan, struct scatterlist *sg_src, if (sg_next(&sg_src[sg_len - 1]) == sg_src) desc->cyclic = true; - if (direction != DMA_NONE) { + if (direction != DMA_TRANS_NONE) { dma_addr_t dev_addr = d40_get_dev_addr(chan, direction); if (direction == DMA_DEV_TO_MEM) -- cgit v1.2.3-18-g5258 From 9112a6b2fa4201c284c62a389710bd32b48c5f63 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Wed, 18 Apr 2012 16:17:13 -0400 Subject: xtensa: fix build failure in xtensa/kernel/signal.c Caused by commit 3785006ac3c8941feb63097c416de92114a6bc39 "xtensa: don't mask signals if we fail to setup signal stack" It assigns a return value to "ret", but there is no such variable anywhere in scope. Create one. Cc: Oleg Nesterov Cc: Chris Zankel Acked-by: Matt Fleming Signed-off-by: Paul Gortmaker --- arch/xtensa/kernel/signal.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/xtensa/kernel/signal.c b/arch/xtensa/kernel/signal.c index b69b000349f..d78869a00b1 100644 --- a/arch/xtensa/kernel/signal.c +++ b/arch/xtensa/kernel/signal.c @@ -496,6 +496,7 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset) signr = get_signal_to_deliver(&info, &ka, regs, NULL); if (signr > 0) { + int ret; /* Are we from a system call? */ -- cgit v1.2.3-18-g5258 From bfae8ee8d28e6a4ac1d63e8077cb09928d8a557a Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Wed, 18 Apr 2012 16:20:38 -0400 Subject: xtensa: fix build error in xtensa/include/asm/io.h Caused by commit 6c03438edeb5c359af35f060ea016ca65671c269 kernel.h: doesn't explicitly use bug.h, so don't include it. This header uses bug.h so explicitly include it now that the implicit presence was removed by 6c03438ed. Signed-off-by: Paul Gortmaker --- arch/xtensa/include/asm/io.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/xtensa/include/asm/io.h b/arch/xtensa/include/asm/io.h index d04cd3a625f..4beb43c087d 100644 --- a/arch/xtensa/include/asm/io.h +++ b/arch/xtensa/include/asm/io.h @@ -14,6 +14,7 @@ #ifdef __KERNEL__ #include #include +#include #include #include -- cgit v1.2.3-18-g5258 From 9f3045eca89a2e6fdd1901aafb9e28231d3f31fb Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Wed, 18 Apr 2012 16:29:57 -0400 Subject: irq: hide debug macros so they don't collide with others. The file kernel/irq/debug.h temporarily defines P, PS, PD and then undefines them. However these names aren't really "internal" enough, and collide with other more legit users such as the ones in the xtensa arch, causing: In file included from kernel/irq/internals.h:58:0, from kernel/irq/irqdesc.c:18: kernel/irq/debug.h:8:0: warning: "PS" redefined [enabled by default] arch/xtensa/include/asm/regs.h:59:0: note: this is the location of the previous definition Add a handful of underscores to do a better job of hiding these temporary macros. Cc: Thomas Gleixner Signed-off-by: Paul Gortmaker --- kernel/irq/debug.h | 38 +++++++++++++++++++------------------- 1 file changed, 19 insertions(+), 19 deletions(-) diff --git a/kernel/irq/debug.h b/kernel/irq/debug.h index 97a8bfadc88..e75e29e4434 100644 --- a/kernel/irq/debug.h +++ b/kernel/irq/debug.h @@ -4,10 +4,10 @@ #include -#define P(f) if (desc->status_use_accessors & f) printk("%14s set\n", #f) -#define PS(f) if (desc->istate & f) printk("%14s set\n", #f) +#define ___P(f) if (desc->status_use_accessors & f) printk("%14s set\n", #f) +#define ___PS(f) if (desc->istate & f) printk("%14s set\n", #f) /* FIXME */ -#define PD(f) do { } while (0) +#define ___PD(f) do { } while (0) static inline void print_irq_desc(unsigned int irq, struct irq_desc *desc) { @@ -23,23 +23,23 @@ static inline void print_irq_desc(unsigned int irq, struct irq_desc *desc) print_symbol("%s\n", (unsigned long)desc->action->handler); } - P(IRQ_LEVEL); - P(IRQ_PER_CPU); - P(IRQ_NOPROBE); - P(IRQ_NOREQUEST); - P(IRQ_NOTHREAD); - P(IRQ_NOAUTOEN); + ___P(IRQ_LEVEL); + ___P(IRQ_PER_CPU); + ___P(IRQ_NOPROBE); + ___P(IRQ_NOREQUEST); + ___P(IRQ_NOTHREAD); + ___P(IRQ_NOAUTOEN); - PS(IRQS_AUTODETECT); - PS(IRQS_REPLAY); - PS(IRQS_WAITING); - PS(IRQS_PENDING); + ___PS(IRQS_AUTODETECT); + ___PS(IRQS_REPLAY); + ___PS(IRQS_WAITING); + ___PS(IRQS_PENDING); - PD(IRQS_INPROGRESS); - PD(IRQS_DISABLED); - PD(IRQS_MASKED); + ___PD(IRQS_INPROGRESS); + ___PD(IRQS_DISABLED); + ___PD(IRQS_MASKED); } -#undef P -#undef PS -#undef PD +#undef ___P +#undef ___PS +#undef ___PD -- cgit v1.2.3-18-g5258 From 53ad1c980d4fb450722a575ca17c188808939340 Mon Sep 17 00:00:00 2001 From: David Teigland Date: Wed, 4 Apr 2012 09:49:15 -0500 Subject: dlm: fix QUECVT when convert queue is empty The QUECVT flag should not prevent conversions from being granted immediately when the convert queue is empty. Signed-off-by: David Teigland --- fs/dlm/lock.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/fs/dlm/lock.c b/fs/dlm/lock.c index fa5c07d51dc..4c58d4a3adc 100644 --- a/fs/dlm/lock.c +++ b/fs/dlm/lock.c @@ -1736,6 +1736,18 @@ static int _can_be_granted(struct dlm_rsb *r, struct dlm_lkb *lkb, int now) if (now && conv && !(lkb->lkb_exflags & DLM_LKF_QUECVT)) return 1; + /* + * Even if the convert is compat with all granted locks, + * QUECVT forces it behind other locks on the convert queue. + */ + + if (now && conv && (lkb->lkb_exflags & DLM_LKF_QUECVT)) { + if (list_empty(&r->res_convertqueue)) + return 1; + else + goto out; + } + /* * The NOORDER flag is set to avoid the standard vms rules on grant * order. -- cgit v1.2.3-18-g5258 From 6bbbc30ce6b0ae428575c8af7c2a6c342c534e19 Mon Sep 17 00:00:00 2001 From: Richard Kuo Date: Tue, 15 Nov 2011 16:58:11 -0600 Subject: Hexagon: misc compile warning/error cleanup due to missing headers Fixed warnings/errors for EXPORT_SYMBOL, linux_binprm, elf related defines Signed-off-by: Richard Kuo --- arch/hexagon/kernel/dma.c | 1 + arch/hexagon/kernel/ptrace.c | 1 + arch/hexagon/kernel/time.c | 1 + arch/hexagon/kernel/vdso.c | 1 + 4 files changed, 4 insertions(+) diff --git a/arch/hexagon/kernel/dma.c b/arch/hexagon/kernel/dma.c index 37302218ca4..0f2367cc549 100644 --- a/arch/hexagon/kernel/dma.c +++ b/arch/hexagon/kernel/dma.c @@ -22,6 +22,7 @@ #include #include #include +#include struct dma_map_ops *dma_ops; EXPORT_SYMBOL(dma_ops); diff --git a/arch/hexagon/kernel/ptrace.c b/arch/hexagon/kernel/ptrace.c index 32342de1a79..96c3b2c4dba 100644 --- a/arch/hexagon/kernel/ptrace.c +++ b/arch/hexagon/kernel/ptrace.c @@ -28,6 +28,7 @@ #include #include #include +#include #include diff --git a/arch/hexagon/kernel/time.c b/arch/hexagon/kernel/time.c index 6bee15c9c11..5d9b33b6793 100644 --- a/arch/hexagon/kernel/time.c +++ b/arch/hexagon/kernel/time.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include diff --git a/arch/hexagon/kernel/vdso.c b/arch/hexagon/kernel/vdso.c index f212a453b52..5d39f42f708 100644 --- a/arch/hexagon/kernel/vdso.c +++ b/arch/hexagon/kernel/vdso.c @@ -21,6 +21,7 @@ #include #include #include +#include #include -- cgit v1.2.3-18-g5258 From e8e42a5cff0704e83151455307a9b0d78fb43b93 Mon Sep 17 00:00:00 2001 From: Richard Kuo Date: Wed, 7 Mar 2012 15:27:23 -0600 Subject: hexagon: use renamed tick_nohz_idle_* functions Signed-off-by: Richard Kuo --- arch/hexagon/kernel/process.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/hexagon/kernel/process.c b/arch/hexagon/kernel/process.c index 18c4f0b0f4b..ff02821bfb7 100644 --- a/arch/hexagon/kernel/process.c +++ b/arch/hexagon/kernel/process.c @@ -1,7 +1,7 @@ /* * Process creation support for Hexagon * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2012, Code Aurora Forum. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and @@ -88,7 +88,7 @@ void (*idle_sleep)(void) = default_idle; void cpu_idle(void) { while (1) { - tick_nohz_stop_sched_tick(1); + tick_nohz_idle_enter(); local_irq_disable(); while (!need_resched()) { idle_sleep(); @@ -97,7 +97,7 @@ void cpu_idle(void) local_irq_disable(); } local_irq_enable(); - tick_nohz_restart_sched_tick(); + tick_nohz_idle_exit(); schedule(); } } -- cgit v1.2.3-18-g5258 From 57f27cca7ab59cec05adc85cef97e9b4f7d28d78 Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Thu, 22 Mar 2012 16:58:25 +0530 Subject: hexagon/CPU hotplug: Add missing call to notify_cpu_starting() The scheduler depends on receiving the CPU_STARTING notification, without which we end up into a lot of trouble. So add the missing call to notify_cpu_starting() in the bringup code. Signed-off-by: Srivatsa S. Bhat Signed-off-by: Richard Kuo --- arch/hexagon/kernel/smp.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/hexagon/kernel/smp.c b/arch/hexagon/kernel/smp.c index 9b44a9e2d05..0672463df20 100644 --- a/arch/hexagon/kernel/smp.c +++ b/arch/hexagon/kernel/smp.c @@ -177,7 +177,12 @@ void __cpuinit start_secondary(void) printk(KERN_INFO "%s cpu %d\n", __func__, current_thread_info()->cpu); + notify_cpu_starting(cpu); + + ipi_call_lock(); set_cpu_online(cpu, true); + ipi_call_unlock(); + local_irq_enable(); cpu_idle(); -- cgit v1.2.3-18-g5258 From e00574b7f3181c5277df819e960d5af205e0e87a Mon Sep 17 00:00:00 2001 From: Richard Kuo Date: Thu, 12 Apr 2012 15:57:33 -0500 Subject: hexagon: add missing cpu.h include Signed-off-by: Richard Kuo --- arch/hexagon/kernel/smp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/hexagon/kernel/smp.c b/arch/hexagon/kernel/smp.c index 0672463df20..1298141874a 100644 --- a/arch/hexagon/kernel/smp.c +++ b/arch/hexagon/kernel/smp.c @@ -1,7 +1,7 @@ /* * SMP support for Hexagon * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2012, Code Aurora Forum. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and @@ -28,6 +28,7 @@ #include #include #include +#include #include /* timer_interrupt */ #include -- cgit v1.2.3-18-g5258 From 2a14e541ed87bca0c125b82961ca3c6f808607d2 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Sun, 22 Apr 2012 23:03:17 -0400 Subject: ACPI: Convert wake_sleep_flags to a value instead of function With commit a2ef5c4fd44ce3922435139393b89f2cce47f576 "ACPI: Move module parameter gts and bfs to sleep.c" the wake_sleep_flags is required when calling acpi_enter_sleep_state, which means that if there are functions outside the sleep.c code they can't get the wake_sleep_flags values. This converts the function in to a exported value and converts the module config operands to a function. Acked-by: Rafael J. Wysocki Acked-by: Lin Ming [v2: Parameters can be turned on/off dynamically] [v3: unsigned char -> u8] [v4: val -> kp->arg] Signed-off-by: Konrad Rzeszutek Wilk Link: http://lkml.kernel.org/r/1335150198-21899-2-git-send-email-konrad.wilk@oracle.com Signed-off-by: H. Peter Anvin --- arch/x86/kernel/acpi/sleep.h | 2 ++ drivers/acpi/sleep.c | 52 ++++++++++++++++++++++++-------------------- 2 files changed, 30 insertions(+), 24 deletions(-) diff --git a/arch/x86/kernel/acpi/sleep.h b/arch/x86/kernel/acpi/sleep.h index 416d4be13fe..fe5fdda5dcd 100644 --- a/arch/x86/kernel/acpi/sleep.h +++ b/arch/x86/kernel/acpi/sleep.h @@ -9,6 +9,8 @@ extern long saved_magic; extern int wakeup_pmode_return; +extern u8 wake_sleep_flags; + extern unsigned long acpi_copy_wakeup_routine(unsigned long); extern void wakeup_long64(void); diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 1d661b5c328..eb6fd233764 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -28,23 +28,33 @@ #include "internal.h" #include "sleep.h" +u8 wake_sleep_flags = ACPI_NO_OPTIONAL_METHODS; static unsigned int gts, bfs; -module_param(gts, uint, 0644); -module_param(bfs, uint, 0644); -MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend."); -MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".); - -static u8 wake_sleep_flags(void) +static int set_param_wake_flag(const char *val, struct kernel_param *kp) { - u8 flags = ACPI_NO_OPTIONAL_METHODS; + int ret = param_set_int(val, kp); - if (gts) - flags |= ACPI_EXECUTE_GTS; - if (bfs) - flags |= ACPI_EXECUTE_BFS; + if (ret) + return ret; - return flags; + if (kp->arg == (const char *)>s) { + if (gts) + wake_sleep_flags |= ACPI_EXECUTE_GTS; + else + wake_sleep_flags &= ~ACPI_EXECUTE_GTS; + } + if (kp->arg == (const char *)&bfs) { + if (bfs) + wake_sleep_flags |= ACPI_EXECUTE_BFS; + else + wake_sleep_flags &= ~ACPI_EXECUTE_BFS; + } + return ret; } +module_param_call(gts, set_param_wake_flag, param_get_int, >s, 0644); +module_param_call(bfs, set_param_wake_flag, param_get_int, &bfs, 0644); +MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend."); +MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".); static u8 sleep_states[ACPI_S_STATE_COUNT]; @@ -263,7 +273,6 @@ static int acpi_suspend_enter(suspend_state_t pm_state) { acpi_status status = AE_OK; u32 acpi_state = acpi_target_sleep_state; - u8 flags = wake_sleep_flags(); int error; ACPI_FLUSH_CPU_CACHE(); @@ -271,7 +280,7 @@ static int acpi_suspend_enter(suspend_state_t pm_state) switch (acpi_state) { case ACPI_STATE_S1: barrier(); - status = acpi_enter_sleep_state(acpi_state, flags); + status = acpi_enter_sleep_state(acpi_state, wake_sleep_flags); break; case ACPI_STATE_S3: @@ -286,7 +295,7 @@ static int acpi_suspend_enter(suspend_state_t pm_state) acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1); /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(acpi_state, flags); + acpi_leave_sleep_state_prep(acpi_state, wake_sleep_flags); /* ACPI 3.0 specs (P62) says that it's the responsibility * of the OSPM to clear the status bit [ implying that the @@ -550,30 +559,27 @@ static int acpi_hibernation_begin(void) static int acpi_hibernation_enter(void) { - u8 flags = wake_sleep_flags(); acpi_status status = AE_OK; ACPI_FLUSH_CPU_CACHE(); /* This shouldn't return. If it returns, we have a problem */ - status = acpi_enter_sleep_state(ACPI_STATE_S4, flags); + status = acpi_enter_sleep_state(ACPI_STATE_S4, wake_sleep_flags); /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(ACPI_STATE_S4, flags); + acpi_leave_sleep_state_prep(ACPI_STATE_S4, wake_sleep_flags); return ACPI_SUCCESS(status) ? 0 : -EFAULT; } static void acpi_hibernation_leave(void) { - u8 flags = wake_sleep_flags(); - /* * If ACPI is not enabled by the BIOS and the boot kernel, we need to * enable it here. */ acpi_enable(); /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(ACPI_STATE_S4, flags); + acpi_leave_sleep_state_prep(ACPI_STATE_S4, wake_sleep_flags); /* Check the hardware signature */ if (facs && s4_hardware_signature != facs->hardware_signature) { printk(KERN_EMERG "ACPI: Hardware changed while hibernated, " @@ -828,12 +834,10 @@ static void acpi_power_off_prepare(void) static void acpi_power_off(void) { - u8 flags = wake_sleep_flags(); - /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */ printk(KERN_DEBUG "%s called\n", __func__); local_irq_disable(); - acpi_enter_sleep_state(ACPI_STATE_S5, flags); + acpi_enter_sleep_state(ACPI_STATE_S5, wake_sleep_flags); } /* -- cgit v1.2.3-18-g5258 From cd74257b974d6d26442c97891c4d05772748b177 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Sun, 22 Apr 2012 23:03:18 -0400 Subject: x86, acpi: Call acpi_enter_sleep_state via an asmlinkage C function from assembler With commit a2ef5c4fd44ce3922435139393b89f2cce47f576 "ACPI: Move module parameter gts and bfs to sleep.c" the wake_sleep_flags is required when calling acpi_enter_sleep_state. The assembler code in wakeup_*.S did not do that. One solution is to call it from assembler and stick the wake_sleep_flags on the stack (for 32-bit) or in %esi (for 64-bit). hpa and rafael both suggested however to create a wrapper function to call acpi_enter_sleep_state and call said wrapper function ("acpi_enter_s3") from assembler. For 32-bit, the acpi_enter_s3 ends up looking as so: push %ebp mov %esp,%ebp sub $0x8,%esp movzbl 0xc1809314,%eax [wake_sleep_flags] movl $0x3,(%esp) mov %eax,0x4(%esp) call 0xc12d1fa0 leave ret And 64-bit: movzbl 0x9afde1(%rip),%esi [wake_sleep_flags] push %rbp mov $0x3,%edi mov %rsp,%rbp callq 0xffffffff812e9800 leaveq retq Reviewed-by: H. Peter Anvin Suggested-by: H. Peter Anvin [v2: Remove extra assembler operations, per hpa review] Signed-off-by: Konrad Rzeszutek Wilk Link: http://lkml.kernel.org/r/1335150198-21899-3-git-send-email-konrad.wilk@oracle.com Signed-off-by: H. Peter Anvin --- arch/x86/kernel/acpi/sleep.c | 4 ++++ arch/x86/kernel/acpi/sleep.h | 2 ++ arch/x86/kernel/acpi/wakeup_32.S | 4 +--- arch/x86/kernel/acpi/wakeup_64.S | 4 +--- 4 files changed, 8 insertions(+), 6 deletions(-) diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 103b6ab368d..146a49c763a 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -24,6 +24,10 @@ unsigned long acpi_realmode_flags; static char temp_stack[4096]; #endif +asmlinkage void acpi_enter_s3(void) +{ + acpi_enter_sleep_state(3, wake_sleep_flags); +} /** * acpi_suspend_lowlevel - save kernel state * diff --git a/arch/x86/kernel/acpi/sleep.h b/arch/x86/kernel/acpi/sleep.h index fe5fdda5dcd..d68677a2a01 100644 --- a/arch/x86/kernel/acpi/sleep.h +++ b/arch/x86/kernel/acpi/sleep.h @@ -3,6 +3,7 @@ */ #include +#include extern unsigned long saved_video_mode; extern long saved_magic; @@ -10,6 +11,7 @@ extern long saved_magic; extern int wakeup_pmode_return; extern u8 wake_sleep_flags; +extern asmlinkage void acpi_enter_s3(void); extern unsigned long acpi_copy_wakeup_routine(unsigned long); extern void wakeup_long64(void); diff --git a/arch/x86/kernel/acpi/wakeup_32.S b/arch/x86/kernel/acpi/wakeup_32.S index 13ab720573e..72610839f03 100644 --- a/arch/x86/kernel/acpi/wakeup_32.S +++ b/arch/x86/kernel/acpi/wakeup_32.S @@ -74,9 +74,7 @@ restore_registers: ENTRY(do_suspend_lowlevel) call save_processor_state call save_registers - pushl $3 - call acpi_enter_sleep_state - addl $4, %esp + call acpi_enter_s3 # In case of S3 failure, we'll emerge here. Jump # to ret_point to recover diff --git a/arch/x86/kernel/acpi/wakeup_64.S b/arch/x86/kernel/acpi/wakeup_64.S index 8ea5164cbd0..014d1d28c39 100644 --- a/arch/x86/kernel/acpi/wakeup_64.S +++ b/arch/x86/kernel/acpi/wakeup_64.S @@ -71,9 +71,7 @@ ENTRY(do_suspend_lowlevel) movq %rsi, saved_rsi addq $8, %rsp - movl $3, %edi - xorl %eax, %eax - call acpi_enter_sleep_state + call acpi_enter_s3 /* in case something went wrong, restore the machine status and go on */ jmp resume_point -- cgit v1.2.3-18-g5258 From ed8cd3b2cd61004cab85380c52b1817aca1ca49b Mon Sep 17 00:00:00 2001 From: Xi Wang Date: Mon, 23 Apr 2012 04:06:41 -0400 Subject: drm/i915: fix integer overflow in i915_gem_execbuffer2() On 32-bit systems, a large args->buffer_count from userspace via ioctl may overflow the allocation size, leading to out-of-bounds access. This vulnerability was introduced in commit 8408c282 ("drm/i915: First try a normal large kmalloc for the temporary exec buffers"). Signed-off-by: Xi Wang Reviewed-by: Chris Wilson Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem_execbuffer.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index f51a696486c..7c50e58175c 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -1404,7 +1404,8 @@ i915_gem_execbuffer2(struct drm_device *dev, void *data, struct drm_i915_gem_exec_object2 *exec2_list = NULL; int ret; - if (args->buffer_count < 1) { + if (args->buffer_count < 1 || + args->buffer_count > UINT_MAX / sizeof(*exec2_list)) { DRM_DEBUG("execbuf2 with %d buffers\n", args->buffer_count); return -EINVAL; } -- cgit v1.2.3-18-g5258 From 44afb3a04391a74309d16180d1e4f8386fdfa745 Mon Sep 17 00:00:00 2001 From: Xi Wang Date: Mon, 23 Apr 2012 04:06:42 -0400 Subject: drm/i915: fix integer overflow in i915_gem_do_execbuffer() On 32-bit systems, a large args->num_cliprects from userspace via ioctl may overflow the allocation size, leading to out-of-bounds access. This vulnerability was introduced in commit 432e58ed ("drm/i915: Avoid allocation for execbuffer object list"). Signed-off-by: Xi Wang Reviewed-by: Chris Wilson Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem_execbuffer.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index 7c50e58175c..de431942ded 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -1133,6 +1133,11 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data, return -EINVAL; } + if (args->num_cliprects > UINT_MAX / sizeof(*cliprects)) { + DRM_DEBUG("execbuf with %u cliprects\n", + args->num_cliprects); + return -EINVAL; + } cliprects = kmalloc(args->num_cliprects * sizeof(*cliprects), GFP_KERNEL); if (cliprects == NULL) { -- cgit v1.2.3-18-g5258 From 98e5272fe70d62e193f70acf9951667beab27aba Mon Sep 17 00:00:00 2001 From: "H.J. Lu" Date: Mon, 23 Apr 2012 14:51:14 -0700 Subject: x32: Check __ILP32__ instead of __LP64__ for x32 Check __LP64__ isn't a reliable way to tell if we are compiling for x32 since __LP64__ isnn't specified by x86-64 psABI. Not all x86-64 compilers define __LP64__, which was added to GCC 3.3. The updated x32 psABI: https://sites.google.com/site/x32abi/documents definse _ILP32 and __ILP32__ for x32. GCC trunk and 4.7 branch have been updated to define _ILP32 and __ILP32__ for x32. This patch replaces __LP64__ check with __ILP32__. Signed-off-by: H.J. Lu Signed-off-by: H. Peter Anvin --- arch/x86/include/asm/posix_types.h | 6 +++--- arch/x86/include/asm/sigcontext.h | 2 +- arch/x86/include/asm/unistd.h | 6 +++--- 3 files changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/x86/include/asm/posix_types.h b/arch/x86/include/asm/posix_types.h index 3427b7798db..7ef7c3020e5 100644 --- a/arch/x86/include/asm/posix_types.h +++ b/arch/x86/include/asm/posix_types.h @@ -7,9 +7,9 @@ #else # ifdef __i386__ # include "posix_types_32.h" -# elif defined(__LP64__) -# include "posix_types_64.h" -# else +# elif defined(__ILP32__) # include "posix_types_x32.h" +# else +# include "posix_types_64.h" # endif #endif diff --git a/arch/x86/include/asm/sigcontext.h b/arch/x86/include/asm/sigcontext.h index 4a085383af2..5ca71c065ee 100644 --- a/arch/x86/include/asm/sigcontext.h +++ b/arch/x86/include/asm/sigcontext.h @@ -257,7 +257,7 @@ struct sigcontext { __u64 oldmask; __u64 cr2; struct _fpstate __user *fpstate; /* zero when no FPU context */ -#ifndef __LP64__ +#ifdef __ILP32__ __u32 __fpstate_pad; #endif __u64 reserved1[8]; diff --git a/arch/x86/include/asm/unistd.h b/arch/x86/include/asm/unistd.h index 37cdc9d99bb..4437001d8e3 100644 --- a/arch/x86/include/asm/unistd.h +++ b/arch/x86/include/asm/unistd.h @@ -63,10 +63,10 @@ #else # ifdef __i386__ # include -# elif defined(__LP64__) -# include -# else +# elif defined(__ILP32__) # include +# else +# include # endif #endif -- cgit v1.2.3-18-g5258 From 2b7b9a7d6c676691cd746a654e2c3b06a6feb9ba Mon Sep 17 00:00:00 2001 From: David Brown Date: Mon, 23 Apr 2012 15:34:20 -0700 Subject: ARM: msm: Fix gic irqdomain support As of commit 75294957be1dee7d22dd7d90bd31334ba410e836 Author: Grant Likely Date: Tue Feb 14 14:06:57 2012 -0700 irq_domain: Remove 'new' irq_domain in favour of the ppc one the ARM gic controller uses proper irq domains. Fix the MSM gic initialization and DT so that it works again. Signed-off-by: David Brown Acked-by: Grant Likely --- arch/arm/boot/dts/msm8660-surf.dts | 4 ++-- arch/arm/mach-msm/board-msm8x60.c | 25 +++++++++++++++---------- 2 files changed, 17 insertions(+), 12 deletions(-) diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts index 15ded0deaa7..45bc4bb04e5 100644 --- a/arch/arm/boot/dts/msm8660-surf.dts +++ b/arch/arm/boot/dts/msm8660-surf.dts @@ -10,7 +10,7 @@ intc: interrupt-controller@02080000 { compatible = "qcom,msm-8660-qgic"; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <3>; reg = < 0x02080000 0x1000 >, < 0x02081000 0x1000 >; }; @@ -19,6 +19,6 @@ compatible = "qcom,msm-hsuart", "qcom,msm-uart"; reg = <0x19c40000 0x1000>, <0x19c00000 0x1000>; - interrupts = <195>; + interrupts = <0 195 0x0>; }; }; diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c index 962e7116975..fb3496a52ef 100644 --- a/arch/arm/mach-msm/board-msm8x60.c +++ b/arch/arm/mach-msm/board-msm8x60.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -49,10 +50,22 @@ static void __init msm8x60_map_io(void) msm_map_msm8x60_io(); } +#ifdef CONFIG_OF +static struct of_device_id msm_dt_gic_match[] __initdata = { + { .compatible = "qcom,msm-8660-qgic", .data = gic_of_init }, + {} +}; +#endif + static void __init msm8x60_init_irq(void) { - gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE, - (void *)MSM_QGIC_CPU_BASE); + if (!of_have_populated_dt()) + gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE, + (void *)MSM_QGIC_CPU_BASE); +#ifdef CONFIG_OF + else + of_irq_init(msm_dt_gic_match); +#endif /* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */ writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4); @@ -73,16 +86,8 @@ static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = { {} }; -static struct of_device_id msm_dt_gic_match[] __initdata = { - { .compatible = "qcom,msm-8660-qgic", }, - {} -}; - static void __init msm8x60_dt_init(void) { - irq_domain_generate_simple(msm_dt_gic_match, MSM8X60_QGIC_DIST_PHYS, - GIC_SPI_START); - if (of_machine_is_compatible("qcom,msm8660-surf")) { printk(KERN_INFO "Init surf UART registers\n"); msm8x60_init_uart12dm(); -- cgit v1.2.3-18-g5258 From d643bdca8ab9cd333da1b68267d0e47328e56f56 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Mon, 23 Apr 2012 16:29:18 -0700 Subject: asm-generic: Allow overriding clock_t and add attributes to siginfo_t For the particular issue of x32, which shares code with i386 in the handling of compat_siginfo_t, the use of a 64-bit clock_t bumps the sigchld structure out of alignment, which triggers a messy cascade of padding. This was already handled on the kernel compat side, but it needs handling on the user space side, which uses the generic header. To make that possible: 1. Allow __kernel_clock_t to be overridden in struct siginfo; 2. Allow there to be attributes added to struct siginfo. Reported-by: H.J. Lu Cc: Bruce J. Beare Cc: Arnd Bergmann Link: http://lkml.kernel.org/r/CAMe9rOqF6Kh6-NK7oP0Fpzkd4SBAWU%2BG53hwBbSD4iA2UzyxuA@mail.gmail.com Signed-off-by: H. Peter Anvin --- include/asm-generic/siginfo.h | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/include/asm-generic/siginfo.h b/include/asm-generic/siginfo.h index 0dd4e87f6fb..5e5e3865f1e 100644 --- a/include/asm-generic/siginfo.h +++ b/include/asm-generic/siginfo.h @@ -35,6 +35,14 @@ typedef union sigval { #define __ARCH_SI_BAND_T long #endif +#ifndef __ARCH_SI_CLOCK_T +#define __ARCH_SI_CLOCK_T __kernel_clock_t +#endif + +#ifndef __ARCH_SI_ATTRIBUTES +#define __ARCH_SI_ATTRIBUTES +#endif + #ifndef HAVE_ARCH_SIGINFO_T typedef struct siginfo { @@ -72,8 +80,8 @@ typedef struct siginfo { __kernel_pid_t _pid; /* which child */ __ARCH_SI_UID_T _uid; /* sender's uid */ int _status; /* exit code */ - __kernel_clock_t _utime; - __kernel_clock_t _stime; + __ARCH_SI_CLOCK_T _utime; + __ARCH_SI_CLOCK_T _stime; } _sigchld; /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */ @@ -91,7 +99,7 @@ typedef struct siginfo { int _fd; } _sigpoll; } _sifields; -} siginfo_t; +} __ARCH_SI_ATTRIBUTES siginfo_t; #endif -- cgit v1.2.3-18-g5258 From a9ad8526bb1af0741a5c0e01155dac08e7bdde60 Mon Sep 17 00:00:00 2001 From: Jonathan Brassow Date: Tue, 24 Apr 2012 10:23:13 +1000 Subject: DM RAID: Use safe version of rdev_for_each Fix segfault caused by using rdev_for_each instead of rdev_for_each_safe Commit dafb20fa34320a472deb7442f25a0c086e0feb33 mistakenly replaced a safe iterator with an unsafe one when making some macro changes. Signed-off-by: Jonathan Brassow Signed-off-by: NeilBrown --- drivers/md/dm-raid.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c index b0ba52459ed..68965e66324 100644 --- a/drivers/md/dm-raid.c +++ b/drivers/md/dm-raid.c @@ -859,7 +859,7 @@ static int analyse_superblocks(struct dm_target *ti, struct raid_set *rs) int ret; unsigned redundancy = 0; struct raid_dev *dev; - struct md_rdev *rdev, *freshest; + struct md_rdev *rdev, *tmp, *freshest; struct mddev *mddev = &rs->md; switch (rs->raid_type->level) { @@ -877,7 +877,7 @@ static int analyse_superblocks(struct dm_target *ti, struct raid_set *rs) } freshest = NULL; - rdev_for_each(rdev, mddev) { + rdev_for_each_safe(rdev, tmp, mddev) { if (!rdev->meta_bdev) continue; -- cgit v1.2.3-18-g5258 From ed209584c38fb74b7eecc03e5b1bfe674e591bd8 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 24 Apr 2012 10:23:14 +1000 Subject: md: don't call ->add_disk unless there is good reason. Commit 7bfec5f35c68121e7b18 md/raid5: If there is a spare and a want_replacement device, start replacement. cause md_check_recovery to call ->add_disk much more often. Instead of only when the array is degraded, it is now called whenever md_check_recovery finds anything useful to do, which includes updating the metadata for clean<->dirty transition. This causes unnecessary work, and causes info messages from ->add_disk to be reported much too often. So refine md_check_recovery to only do any actual recovery checking (including ->add_disk) if MD_RECOVERY_NEEDED is set. This fix is suitable for 3.3.y: Cc: stable@vger.kernel.org Reported-by: Jan Ceuleers Signed-off-by: NeilBrown --- drivers/md/md.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index b572e1e386c..8beb19c3bb4 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -7560,14 +7560,14 @@ void md_check_recovery(struct mddev *mddev) * any transients in the value of "sync_action". */ set_bit(MD_RECOVERY_RUNNING, &mddev->recovery); - clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery); /* Clear some bits that don't mean anything, but * might be left set */ clear_bit(MD_RECOVERY_INTR, &mddev->recovery); clear_bit(MD_RECOVERY_DONE, &mddev->recovery); - if (test_bit(MD_RECOVERY_FROZEN, &mddev->recovery)) + if (!test_and_clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery) || + test_bit(MD_RECOVERY_FROZEN, &mddev->recovery)) goto unlock; /* no recovery is running. * remove any failed drives, then -- cgit v1.2.3-18-g5258 From 30b8aa9172dfeaac6d77897c67ee9f9fc574cdbb Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 24 Apr 2012 10:23:16 +1000 Subject: md: fix possible corruption of array metadata on shutdown. commit c744a65c1e2d59acc54333ce8 md: don't set md arrays to readonly on shutdown. removed the possibility of a 'BUG' when data is written to an array that has just been switched to read-only, but also introduced the possibility that the array metadata could be corrupted. If, when md_notify_reboot gets the mddev lock, the array is in a state where it is assembled but hasn't been started (as can happen if the personality module is not available, or in other unusual situations), then incorrect metadata will be written out making it impossible to re-assemble the array. So only call __md_stop_writes() if the array has actually been activated. This patch is needed for any stable kernel which has had the above commit applied. Cc: stable@vger.kernel.org Reported-by: Christoph Nelles Signed-off-by: NeilBrown --- drivers/md/md.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 8beb19c3bb4..477eb2e180c 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -8140,7 +8140,8 @@ static int md_notify_reboot(struct notifier_block *this, for_each_mddev(mddev, tmp) { if (mddev_trylock(mddev)) { - __md_stop_writes(mddev); + if (mddev->pers) + __md_stop_writes(mddev); mddev->safemode = 2; mddev_unlock(mddev); } -- cgit v1.2.3-18-g5258 From 89b8835ec865dddd6673a8dd7003581bf2377176 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Mon, 23 Apr 2012 16:34:12 -0700 Subject: x32, siginfo: Provide proper overrides for x32 siginfo_t Provide the proper override macros for x32 siginfo_t. The combination of a special type here and an overall alignment constraint actually ends up with all the types being properly aligned, but the hack is needed to keep the substructures inside siginfo_t from adding padding. Note: use __attribute__((aligned())) since __aligned() is not exported to user space. [ v2: fix stray semicolon ] Reported-by: H.J. Lu Cc: Bruce J. Beare Cc: Arnd Bergmann Link: http://lkml.kernel.org/r/CAMe9rOqF6Kh6-NK7oP0Fpzkd4SBAWU%2BG53hwBbSD4iA2UzyxuA@mail.gmail.com Signed-off-by: H. Peter Anvin --- arch/x86/include/asm/siginfo.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/x86/include/asm/siginfo.h b/arch/x86/include/asm/siginfo.h index fc1aa553564..34c47b3341c 100644 --- a/arch/x86/include/asm/siginfo.h +++ b/arch/x86/include/asm/siginfo.h @@ -2,7 +2,13 @@ #define _ASM_X86_SIGINFO_H #ifdef __x86_64__ -# define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int)) +# ifdef __ILP32__ /* x32 */ +typedef long long __kernel_si_clock_t __attribute__((aligned(4))); +# define __ARCH_SI_CLOCK_T __kernel_si_clock_t +# define __ARCH_SI_ATTRIBUTES __attribute__((aligned(8))) +# else /* x86-64 */ +# define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int)) +# endif #endif #include -- cgit v1.2.3-18-g5258 From aca50bd3b4c4bb5528a1878158ba7abce41de534 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 23 Apr 2012 11:14:50 -0700 Subject: mm: fix s390 BUG by __set_page_dirty_no_writeback on swap Mel reports a BUG_ON(slot == NULL) in radix_tree_tag_set() on s390 3.0.13: called from __set_page_dirty_nobuffers() when page_remove_rmap() tries to transfer dirty flag from s390 storage key to struct page and radix_tree. That would be because of reclaim's shrink_page_list() calling add_to_swap() on this page at the same time: first PageSwapCache is set (causing page_mapping(page) to appear as &swapper_space), then page->private set, then tree_lock taken, then page inserted into radix_tree - so there's an interval before taking the lock when the radix_tree slot is empty. We could fix this by moving __add_to_swap_cache()'s spin_lock_irq up before the SetPageSwapCache. But a better fix is simply to do what's five years overdue: Ken Chen introduced __set_page_dirty_no_writeback() (if !PageDirty TestSetPageDirty) for tmpfs to skip all the radix_tree overhead, and swap is just the same - it ignores the radix_tree tag, and does not participate in dirty page accounting, so should be using __set_page_dirty_no_writeback() too. s390 testing now confirms that this does indeed fix the problem. Reported-by: Mel Gorman Signed-off-by: Hugh Dickins Acked-by: Mel Gorman Cc: Andrew Morton Cc: Martin Schwidefsky Cc: Heiko Carstens Cc: Rik van Riel Cc: Ken Chen Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds --- mm/swap_state.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/swap_state.c b/mm/swap_state.c index 9d3dd3763cf..4c5ff7f284d 100644 --- a/mm/swap_state.c +++ b/mm/swap_state.c @@ -26,7 +26,7 @@ */ static const struct address_space_operations swap_aops = { .writepage = swap_writepage, - .set_page_dirty = __set_page_dirty_nobuffers, + .set_page_dirty = __set_page_dirty_no_writeback, .migratepage = migrate_page, }; -- cgit v1.2.3-18-g5258 From 99aa78466777083255b876293e9e83dec7cd809a Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Fri, 13 Apr 2012 10:27:35 +0800 Subject: jbd2: use GFP_NOFS for blkdev_issue_flush flush request is issued in transaction commit code path, so looks using GFP_KERNEL to allocate memory for flush request bio falls into the classic deadlock issue. I saw btrfs and dm get it right, but ext4, xfs and md are using GFP. Signed-off-by: Shaohua Li Signed-off-by: Theodore Ts'o Reviewed-by: Jan Kara Cc: stable@vger.kernel.org --- fs/jbd2/commit.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c index 806525a7269..840f70f5079 100644 --- a/fs/jbd2/commit.c +++ b/fs/jbd2/commit.c @@ -723,7 +723,7 @@ start_journal_io: if (commit_transaction->t_need_data_flush && (journal->j_fs_dev != journal->j_dev) && (journal->j_flags & JBD2_BARRIER)) - blkdev_issue_flush(journal->j_fs_dev, GFP_KERNEL, NULL); + blkdev_issue_flush(journal->j_fs_dev, GFP_NOFS, NULL); /* Done it all: now write the commit record asynchronously. */ if (JBD2_HAS_INCOMPAT_FEATURE(journal, @@ -859,7 +859,7 @@ wait_for_iobuf: if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT) && journal->j_flags & JBD2_BARRIER) { - blkdev_issue_flush(journal->j_dev, GFP_KERNEL, NULL); + blkdev_issue_flush(journal->j_dev, GFP_NOFS, NULL); } if (err) -- cgit v1.2.3-18-g5258 From db7e5c668e1b16061fe2d94d3cba022dd360c5d4 Mon Sep 17 00:00:00 2001 From: Eldad Zack Date: Sun, 22 Apr 2012 17:50:52 +0200 Subject: super.c: unused variable warning without CONFIG_QUOTA MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit sb info is only checked with quota support. fs/ext4/super.c: In function ‘parse_options’: fs/ext4/super.c:1600:23: warning: unused variable ‘sbi’ [-Wunused-variable] Signed-off-by: Eldad Zack Signed-off-by: Theodore Ts'o --- fs/ext4/super.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 6da193564e4..e1fb1d5de58 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -1597,7 +1597,9 @@ static int parse_options(char *options, struct super_block *sb, unsigned int *journal_ioprio, int is_remount) { +#ifdef CONFIG_QUOTA struct ext4_sb_info *sbi = EXT4_SB(sb); +#endif char *p; substring_t args[MAX_OPT_ARGS]; int token; -- cgit v1.2.3-18-g5258 From 4c569a72c30dfee9b5133284aba67e3aa0c9505d Mon Sep 17 00:00:00 2001 From: Bob Peterson Date: Tue, 10 Apr 2012 14:45:24 -0400 Subject: GFS2: Instruct DLM to avoid queue convert slowdown This patch instructs DLM to prevent an "in place" conversion, where the lock just stays on the granted queue, and instead forces the conversion to the back of the convert queue. This is done on upward conversions only. This is useful in cases where, for example, a lock is frequently needed in PR on one node, but another node needs it temporarily in EX to update it. This may happen, for example, when the rindex is being updated by gfs2_grow. The gfs2_grow needs to have the lock in EX, but the other nodes need to re-read it to retrieve the updates. The glock is already granted in PR on the non-growing nodes, so this prevents them from continually re-granting the lock in PR, and forces the EX from gfs2_grow to go through. Signed-off-by: Bob Peterson Signed-off-by: Steven Whitehouse --- fs/gfs2/lock_dlm.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/fs/gfs2/lock_dlm.c b/fs/gfs2/lock_dlm.c index f8411bd1b80..5f5e70e047d 100644 --- a/fs/gfs2/lock_dlm.c +++ b/fs/gfs2/lock_dlm.c @@ -200,10 +200,11 @@ static int make_mode(const unsigned int lmstate) return -1; } -static u32 make_flags(const u32 lkid, const unsigned int gfs_flags, +static u32 make_flags(struct gfs2_glock *gl, const unsigned int gfs_flags, const int req) { u32 lkf = DLM_LKF_VALBLK; + u32 lkid = gl->gl_lksb.sb_lkid; if (gfs_flags & LM_FLAG_TRY) lkf |= DLM_LKF_NOQUEUE; @@ -227,8 +228,11 @@ static u32 make_flags(const u32 lkid, const unsigned int gfs_flags, BUG(); } - if (lkid != 0) + if (lkid != 0) { lkf |= DLM_LKF_CONVERT; + if (test_bit(GLF_BLOCKING, &gl->gl_flags)) + lkf |= DLM_LKF_QUECVT; + } return lkf; } @@ -250,7 +254,7 @@ static int gdlm_lock(struct gfs2_glock *gl, unsigned int req_state, char strname[GDLM_STRNAME_BYTES] = ""; req = make_mode(req_state); - lkf = make_flags(gl->gl_lksb.sb_lkid, flags, req); + lkf = make_flags(gl, flags, req); gfs2_glstats_inc(gl, GFS2_LKS_DCOUNT); gfs2_sbstats_inc(gl, GFS2_LKS_DCOUNT); if (gl->gl_lksb.sb_lkid) { -- cgit v1.2.3-18-g5258 From 3c7c87fd5bd71f57c68a64d11a15170d0dc4f7aa Mon Sep 17 00:00:00 2001 From: Sachin Prabhu Date: Tue, 24 Apr 2012 15:28:14 +0100 Subject: CIFS: Show backupuid/gid in /proc/mounts Show backupuid/backupgid in /proc/mounts for cifs shares mounted with the backupuid/backupgid feature. Also consolidate the two separate checks for pvolume_info->backupuid_specified into a single if condition in cifs_setup_cifs_sb(). Signed-off-by: Sachin Prabhu Reviewed-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifsfs.c | 4 ++++ fs/cifs/connect.c | 12 ++++++------ 2 files changed, 10 insertions(+), 6 deletions(-) diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index d3421282244..ea8eb92b65b 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -434,6 +434,10 @@ cifs_show_options(struct seq_file *s, struct dentry *root) seq_printf(s, ",noperm"); if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_STRICT_IO) seq_printf(s, ",strictcache"); + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_BACKUPUID) + seq_printf(s, ",backupuid=%u", cifs_sb->mnt_backupuid); + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_BACKUPGID) + seq_printf(s, ",backupgid=%u", cifs_sb->mnt_backupgid); seq_printf(s, ",rsize=%d", cifs_sb->rsize); seq_printf(s, ",wsize=%d", cifs_sb->wsize); diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index f31dc9ac37b..f4d381e331c 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -3228,10 +3228,6 @@ void cifs_setup_cifs_sb(struct smb_vol *pvolume_info, cifs_sb->mnt_uid = pvolume_info->linux_uid; cifs_sb->mnt_gid = pvolume_info->linux_gid; - if (pvolume_info->backupuid_specified) - cifs_sb->mnt_backupuid = pvolume_info->backupuid; - if (pvolume_info->backupgid_specified) - cifs_sb->mnt_backupgid = pvolume_info->backupgid; cifs_sb->mnt_file_mode = pvolume_info->file_mode; cifs_sb->mnt_dir_mode = pvolume_info->dir_mode; cFYI(1, "file mode: 0x%hx dir mode: 0x%hx", @@ -3262,10 +3258,14 @@ void cifs_setup_cifs_sb(struct smb_vol *pvolume_info, cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_RWPIDFORWARD; if (pvolume_info->cifs_acl) cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_CIFS_ACL; - if (pvolume_info->backupuid_specified) + if (pvolume_info->backupuid_specified) { cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_CIFS_BACKUPUID; - if (pvolume_info->backupgid_specified) + cifs_sb->mnt_backupuid = pvolume_info->backupuid; + } + if (pvolume_info->backupgid_specified) { cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_CIFS_BACKUPGID; + cifs_sb->mnt_backupgid = pvolume_info->backupgid; + } if (pvolume_info->override_uid) cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_OVERR_UID; if (pvolume_info->override_gid) -- cgit v1.2.3-18-g5258 From 28f8881023c9713c303c0feda270929f9384c019 Mon Sep 17 00:00:00 2001 From: Sachin Prabhu Date: Tue, 24 Apr 2012 15:28:30 +0100 Subject: Use correct conversion specifiers in cifs_show_options cifs_show_options uses the wrong conversion specifier for uid, gid, rsize & wsize. Correct this to %u to match it to the variable type 'unsigned integer'. Signed-off-by: Sachin Prabhu Reviewed-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifsfs.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index ea8eb92b65b..811245b1ff2 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -370,13 +370,13 @@ cifs_show_options(struct seq_file *s, struct dentry *root) (int)(srcaddr->sa_family)); } - seq_printf(s, ",uid=%d", cifs_sb->mnt_uid); + seq_printf(s, ",uid=%u", cifs_sb->mnt_uid); if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_UID) seq_printf(s, ",forceuid"); else seq_printf(s, ",noforceuid"); - seq_printf(s, ",gid=%d", cifs_sb->mnt_gid); + seq_printf(s, ",gid=%u", cifs_sb->mnt_gid); if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID) seq_printf(s, ",forcegid"); else @@ -439,8 +439,8 @@ cifs_show_options(struct seq_file *s, struct dentry *root) if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_BACKUPGID) seq_printf(s, ",backupgid=%u", cifs_sb->mnt_backupgid); - seq_printf(s, ",rsize=%d", cifs_sb->rsize); - seq_printf(s, ",wsize=%d", cifs_sb->wsize); + seq_printf(s, ",rsize=%u", cifs_sb->rsize); + seq_printf(s, ",wsize=%u", cifs_sb->wsize); /* convert actimeo and display it in seconds */ seq_printf(s, ",actimeo=%lu", cifs_sb->actimeo / HZ); -- cgit v1.2.3-18-g5258 From a2cd62ec9a3a2805014bdc14e0644b5faa352d3c Mon Sep 17 00:00:00 2001 From: Omar Ramirez Luna Date: Fri, 20 Apr 2012 20:22:41 -0500 Subject: staging: tidspbridge: remove usage of OMAP2_L4_IO_ADDRESS MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Instead now use ioremap. This is needed for 3.4 since this change emerged in mainline during one of the previous rc cycles. These solves the following compilation breaks: drivers/staging/tidspbridge/core/tiomap3430.c: In function ‘bridge_brd_start’: drivers/staging/tidspbridge/core/tiomap3430.c:425:4: error: implicit declaration of function ‘OMAP2_L4_IO_ADDRESS’ drivers/staging/tidspbridge/core/wdt.c: In function ‘dsp_wdt_init’: drivers/staging/tidspbridge/core/wdt.c:56:2: error: implicit declaration of function ‘OMAP2_L4_IO_ADDRESS’ For control registers a new function needs to be defined so we can get rid of a layer violation, but that approach must be queued for the next merge window. As seen in: http://www.arm.linux.org.uk/developer/build/ platform: omap4430-sdp build: uImage config: randconfig version: 3.4.0-rc3 start time: Apr 20 2012 01:07 Reported-by: Tony Lindgren Signed-off-by: Omar Ramirez Luna Signed-off-by: Greg Kroah-Hartman --- drivers/staging/tidspbridge/core/tiomap3430.c | 20 ++++++++++++-------- drivers/staging/tidspbridge/core/wdt.c | 8 +++++++- 2 files changed, 19 insertions(+), 9 deletions(-) diff --git a/drivers/staging/tidspbridge/core/tiomap3430.c b/drivers/staging/tidspbridge/core/tiomap3430.c index 7862513cc29..9cf29fcea11 100644 --- a/drivers/staging/tidspbridge/core/tiomap3430.c +++ b/drivers/staging/tidspbridge/core/tiomap3430.c @@ -79,10 +79,6 @@ #define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) #define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) -#define OMAP343X_CTRL_REGADDR(reg) \ - OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) - - /* Forward Declarations: */ static int bridge_brd_monitor(struct bridge_dev_context *dev_ctxt); static int bridge_brd_read(struct bridge_dev_context *dev_ctxt, @@ -418,19 +414,27 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt, /* Assert RST1 i.e only the RST only for DSP megacell */ if (!status) { + /* + * XXX: ioremapping MUST be removed once ctrl + * function is made available. + */ + void __iomem *ctrl = ioremap(OMAP343X_CTRL_BASE, SZ_4K); + if (!ctrl) + return -ENOMEM; + (*pdata->dsp_prm_rmw_bits)(OMAP3430_RST1_IVA2_MASK, OMAP3430_RST1_IVA2_MASK, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL); /* Mask address with 1K for compatibility */ __raw_writel(dsp_addr & OMAP3_IVA2_BOOTADDR_MASK, - OMAP343X_CTRL_REGADDR( - OMAP343X_CONTROL_IVA2_BOOTADDR)); + ctrl + OMAP343X_CONTROL_IVA2_BOOTADDR); /* * Set bootmode to self loop if dsp_debug flag is true */ __raw_writel((dsp_debug) ? OMAP3_IVA2_BOOTMOD_IDLE : 0, - OMAP343X_CTRL_REGADDR( - OMAP343X_CONTROL_IVA2_BOOTMOD)); + ctrl + OMAP343X_CONTROL_IVA2_BOOTMOD); + + iounmap(ctrl); } } if (!status) { diff --git a/drivers/staging/tidspbridge/core/wdt.c b/drivers/staging/tidspbridge/core/wdt.c index 70055c8111e..870f934f4f3 100644 --- a/drivers/staging/tidspbridge/core/wdt.c +++ b/drivers/staging/tidspbridge/core/wdt.c @@ -53,7 +53,10 @@ int dsp_wdt_init(void) int ret = 0; dsp_wdt.sm_wdt = NULL; - dsp_wdt.reg_base = OMAP2_L4_IO_ADDRESS(OMAP34XX_WDT3_BASE); + dsp_wdt.reg_base = ioremap(OMAP34XX_WDT3_BASE, SZ_4K); + if (!dsp_wdt.reg_base) + return -ENOMEM; + tasklet_init(&dsp_wdt.wdt3_tasklet, dsp_wdt_dpc, 0); dsp_wdt.fclk = clk_get(NULL, "wdt3_fck"); @@ -99,6 +102,9 @@ void dsp_wdt_exit(void) dsp_wdt.fclk = NULL; dsp_wdt.iclk = NULL; dsp_wdt.sm_wdt = NULL; + + if (dsp_wdt.reg_base) + iounmap(dsp_wdt.reg_base); dsp_wdt.reg_base = NULL; } -- cgit v1.2.3-18-g5258 From 349ae79c0a3db1632ac4db955c53db05fc017bde Mon Sep 17 00:00:00 2001 From: Seth Jennings Date: Mon, 23 Apr 2012 20:33:50 -0500 Subject: staging: zcache: fix Kconfig crypto dependency ZCACHE is a boolean in the Kconfig. When selected, it should require that CRYPTO be builtin (=y). Currently, ZCACHE=y and CRYPTO=m is a valid configuration when it should not be. This patch changes the zcache Kconfig to enforce this dependency. Signed-off-by: Seth Jennings Acked-by: Konrad Rzeszutek Wilk Signed-off-by: Greg Kroah-Hartman --- drivers/staging/zcache/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/zcache/Kconfig b/drivers/staging/zcache/Kconfig index 3ed2c8f656a..7048e01f081 100644 --- a/drivers/staging/zcache/Kconfig +++ b/drivers/staging/zcache/Kconfig @@ -2,7 +2,7 @@ config ZCACHE bool "Dynamic compression of swap pages and clean pagecache pages" # X86 dependency is because zsmalloc uses non-portable pte/tlb # functions - depends on (CLEANCACHE || FRONTSWAP) && CRYPTO && X86 + depends on (CLEANCACHE || FRONTSWAP) && CRYPTO=y && X86 select ZSMALLOC select CRYPTO_LZO default n -- cgit v1.2.3-18-g5258 From dc890df0a77cafe5f4a3d81c0dade637c27f1934 Mon Sep 17 00:00:00 2001 From: Imre Kaloz Date: Thu, 19 Apr 2012 12:27:27 +0200 Subject: staging: octeon-ethernet: fix build errors by including interrupt.h This patch fixes the following build failures: drivers/staging/octeon/ethernet.c: In function 'cvm_oct_cleanup_module': drivers/staging/octeon/ethernet.c:799:2: error: implicit declaration of function 'free_irq' drivers/staging/octeon/ethernet-rx.c: In function 'cvm_oct_no_more_work': drivers/staging/octeon/ethernet-rx.c:119:3: error: implicit declaration of function 'enable_irq' drivers/staging/octeon/ethernet-rx.c: In function 'cvm_oct_do_interrupt': drivers/staging/octeon/ethernet-rx.c:136:2: error: implicit declaration of function 'disable_irq_nosync' drivers/staging/octeon/ethernet-rx.c: In function 'cvm_oct_rx_initialize': drivers/staging/octeon/ethernet-rx.c:532:2: error: implicit declaration of function 'request_irq' drivers/staging/octeon/ethernet-tx.c: In function 'cvm_oct_tx_initialize': drivers/staging/octeon/ethernet-tx.c:712:2: error: implicit declaration of function 'request_irq' drivers/staging/octeon/ethernet-tx.c: In function 'cvm_oct_tx_shutdown': drivers/staging/octeon/ethernet-tx.c:723:2: error: implicit declaration of function 'free_irq' Signed-off-by: Imre Kaloz Acked-by: David Daney Signed-off-by: Greg Kroah-Hartman --- drivers/staging/octeon/ethernet-rx.c | 1 + drivers/staging/octeon/ethernet-tx.c | 1 + drivers/staging/octeon/ethernet.c | 1 + 3 files changed, 3 insertions(+) diff --git a/drivers/staging/octeon/ethernet-rx.c b/drivers/staging/octeon/ethernet-rx.c index 400df8cbee5..d91751f9ffe 100644 --- a/drivers/staging/octeon/ethernet-rx.c +++ b/drivers/staging/octeon/ethernet-rx.c @@ -36,6 +36,7 @@ #include #include #include +#include #include #ifdef CONFIG_XFRM #include diff --git a/drivers/staging/octeon/ethernet-tx.c b/drivers/staging/octeon/ethernet-tx.c index 56d74dc2fbd..91a97b3e45c 100644 --- a/drivers/staging/octeon/ethernet-tx.c +++ b/drivers/staging/octeon/ethernet-tx.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #ifdef CONFIG_XFRM #include diff --git a/drivers/staging/octeon/ethernet.c b/drivers/staging/octeon/ethernet.c index 9112cd88215..60cba8194de 100644 --- a/drivers/staging/octeon/ethernet.c +++ b/drivers/staging/octeon/ethernet.c @@ -31,6 +31,7 @@ #include #include #include +#include #include -- cgit v1.2.3-18-g5258 From 18ea1fcd7ef19e496c523d814d52261cc4777f51 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 21 Apr 2012 06:57:29 -0700 Subject: ARM: mini2440_defconfig: Fix build error This is needed to fix mini2440_defconfig after the platform files have been moved around. arm-none-linux-gnueabi-ld: no machine record defined arm-none-linux-gnueabi-ld: no machine record defined arm-none-linux-gnueabi-ld: no machine record defined make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Arnd Bergmann Signed-off-by: Kukjin Kim --- arch/arm/configs/mini2440_defconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig index 42da9183acc..082175c54e7 100644 --- a/arch/arm/configs/mini2440_defconfig +++ b/arch/arm/configs/mini2440_defconfig @@ -14,6 +14,8 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_BLK_DEV_INTEGRITY=y CONFIG_ARCH_S3C24XX=y +# CONFIG_CPU_S3C2410 is not set +CONFIG_CPU_S3C2440=y CONFIG_S3C_ADC=y CONFIG_S3C24XX_PWM=y CONFIG_MACH_MINI2440=y -- cgit v1.2.3-18-g5258 From 7518dde92c27f845a685cdc559c83c666cc01840 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Sat, 21 Apr 2012 07:55:33 -0700 Subject: ARM: S3C24XX: Fix build warning for S3C2410_PM warning: (CPU_S3C2440 && CPU_S3C2442) selects S3C2410_PM which has unmet direct dependencies (ARCH_S3C24XX && CPU_S3C2410) warning: (CPU_S3C2440 && CPU_S3C2442) selects S3C2410_PM which has unmet direct dependencies (ARCH_S3C24XX && CPU_S3C2410) Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c24xx/Kconfig | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 0f3a327ebca..b34287ab5af 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -111,10 +111,6 @@ config S3C24XX_SETUP_TS help Compile in platform device definition for Samsung TouchScreen. -# cpu-specific sections - -if CPU_S3C2410 - config S3C2410_DMA bool depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442) @@ -127,6 +123,10 @@ config S3C2410_PM help Power Management code common to S3C2410 and better +# cpu-specific sections + +if CPU_S3C2410 + config S3C24XX_SIMTEC_NOR bool help -- cgit v1.2.3-18-g5258 From ffabec4ef7ad6ca9365d39f643b8a24c0fce04e7 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Sat, 21 Apr 2012 08:31:38 -0700 Subject: ARM: EXYNOS: Fix resource on dev-dwmci.c Should be EXYNOS4_IRQ_DWMCI instead of IRQ_DWMCI, and use DEFINE_RES_{MEM,IRQ}. Reported-by: Jaehoon Chung Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/dev-dwmci.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-) diff --git a/arch/arm/mach-exynos/dev-dwmci.c b/arch/arm/mach-exynos/dev-dwmci.c index b025db4bf60..79035018fb7 100644 --- a/arch/arm/mach-exynos/dev-dwmci.c +++ b/arch/arm/mach-exynos/dev-dwmci.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include @@ -33,16 +34,8 @@ static int exynos4_dwmci_init(u32 slot_id, irq_handler_t handler, void *data) } static struct resource exynos4_dwmci_resource[] = { - [0] = { - .start = EXYNOS4_PA_DWMCI, - .end = EXYNOS4_PA_DWMCI + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_DWMCI, - .end = IRQ_DWMCI, - .flags = IORESOURCE_IRQ, - } + [0] = DEFINE_RES_MEM(EXYNOS4_PA_DWMCI, SZ_4K), + [1] = DEFINE_RES_IRQ(EXYNOS4_IRQ_DWMCI), }; static struct dw_mci_board exynos4_dwci_pdata = { -- cgit v1.2.3-18-g5258 From 6fff5a11fd07d7f918ac3737da4846558518c31d Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Tue, 24 Apr 2012 13:25:01 -0700 Subject: ARM: EXYNOS: Fix compilation error when CONFIG_OF is not defined Fixed following compile time error. arch/arm/mach-exynos/common.c: In function 'exynos5_init_irq': arch/arm/mach-exynos/common.c:539:2: error: implicit declaration of function 'of_irq_init' arch/arm/mach-exynos/common.c:539:14: error: 'exynos4_dt_irq_match' undeclared (first use in this function) arch/arm/mach-exynos/common.c:539:14: note: each undeclared identifier is reported only once for each function it appears in Cc: Thomas Abraham Signed-off-by: Tushar Behera Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/common.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 6c0e4f54c94..5ccd6e80a60 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -547,7 +547,9 @@ void __init exynos5_init_irq(void) { int irq; +#ifdef CONFIG_OF of_irq_init(exynos4_dt_irq_match); +#endif for (irq = 0; irq < EXYNOS5_MAX_COMBINER_NR; irq++) { combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq), -- cgit v1.2.3-18-g5258 From 6f6543f53f9ce136e01d7114bf6f0818ca54fb41 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 24 Apr 2012 11:29:42 +0200 Subject: usb gadget: uvc: uvc_request_data::length field must be signed The field is used to pass the UVC request data length, but can also be used to signal an error when setting it to a negative value. Switch from unsigned int to __s32. Reported-by: Fernandez Gonzalo Signed-off-by: Laurent Pinchart Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/uvc.h | 2 +- drivers/usb/gadget/uvc_v4l2.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/uvc.h b/drivers/usb/gadget/uvc.h index bc78c606c12..ca4e03a1c73 100644 --- a/drivers/usb/gadget/uvc.h +++ b/drivers/usb/gadget/uvc.h @@ -28,7 +28,7 @@ struct uvc_request_data { - unsigned int length; + __s32 length; __u8 data[60]; }; diff --git a/drivers/usb/gadget/uvc_v4l2.c b/drivers/usb/gadget/uvc_v4l2.c index f6e083b5019..54d7ca559cb 100644 --- a/drivers/usb/gadget/uvc_v4l2.c +++ b/drivers/usb/gadget/uvc_v4l2.c @@ -39,7 +39,7 @@ uvc_send_response(struct uvc_device *uvc, struct uvc_request_data *data) if (data->length < 0) return usb_ep_set_halt(cdev->gadget->ep0); - req->length = min(uvc->event_length, data->length); + req->length = min_t(unsigned int, uvc->event_length, data->length); req->zero = data->length < uvc->event_length; req->dma = DMA_ADDR_INVALID; -- cgit v1.2.3-18-g5258 From 151b61284776be2d6f02d48c23c3625678960b97 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 24 Apr 2012 14:07:22 -0400 Subject: USB: EHCI: fix crash during suspend on ASUS computers This patch (as1545) fixes a problem affecting several ASUS computers: The machine crashes or corrupts memory when going into suspend if the ehci-hcd driver is bound to any controllers. Users have been forced to unbind or unload ehci-hcd before putting their systems to sleep. After extensive testing, it was determined that the machines don't like going into suspend when any EHCI controllers are in the PCI D3 power state. Presumably this is a firmware bug, but there's nothing we can do about it except to avoid putting the controllers in D3 during system sleep. The patch adds a new flag to indicate whether the problem is present, and avoids changing the controller's power state if the flag is set. Runtime suspend is unaffected; this matters only for system suspend. However as a side effect, the controller will not respond to remote wakeup requests while the system is asleep. Hence USB wakeup is not functional -- but of course, this is already true in the current state of affairs. This fixes Bugzilla #42728. Signed-off-by: Alan Stern Tested-by: Steven Rostedt Tested-by: Andrey Rahmatullin Tested-by: Oleksij Rempel (fishor) Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd-pci.c | 9 +++++++++ drivers/usb/host/ehci-pci.c | 8 ++++++++ include/linux/usb/hcd.h | 2 ++ 3 files changed, 19 insertions(+) diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 622b4a48e73..57ed9e400c0 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -493,6 +493,15 @@ static int hcd_pci_suspend_noirq(struct device *dev) pci_save_state(pci_dev); + /* + * Some systems crash if an EHCI controller is in D3 during + * a sleep transition. We have to leave such controllers in D0. + */ + if (hcd->broken_pci_sleep) { + dev_dbg(dev, "Staying in PCI D0\n"); + return retval; + } + /* If the root hub is dead rather than suspended, disallow remote * wakeup. usb_hc_died() should ensure that both hosts are marked as * dying, so we only need to check the primary roothub. diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 01bb7241d6e..fe8dc069164 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -144,6 +144,14 @@ static int ehci_pci_setup(struct usb_hcd *hcd) hcd->has_tt = 1; tdi_reset(ehci); } + if (pdev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK) { + /* EHCI #1 or #2 on 6 Series/C200 Series chipset */ + if (pdev->device == 0x1c26 || pdev->device == 0x1c2d) { + ehci_info(ehci, "broken D3 during system sleep on ASUS\n"); + hcd->broken_pci_sleep = 1; + device_set_wakeup_capable(&pdev->dev, false); + } + } break; case PCI_VENDOR_ID_TDI: if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) { diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 5de415707c2..d28cc78a38e 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -126,6 +126,8 @@ struct usb_hcd { unsigned wireless:1; /* Wireless USB HCD */ unsigned authorized_default:1; unsigned has_tt:1; /* Integrated TT in root hub */ + unsigned broken_pci_sleep:1; /* Don't put the + controller in PCI-D3 for system sleep */ unsigned int irq; /* irq allocated */ void __iomem *regs; /* device memory/io */ -- cgit v1.2.3-18-g5258 From f8262d476823a7ea1eb497ff9676d1eab2393c75 Mon Sep 17 00:00:00 2001 From: Bojan Smojver Date: Tue, 24 Apr 2012 23:53:28 +0200 Subject: PM / Hibernate: fix the number of pages used for hibernate/thaw buffering Hibernation regression fix, since 3.2. Calculate the number of required free pages based on non-high memory pages only, because that is where the buffers will come from. Commit 081a9d043c983f161b78fdc4671324d1342b86bc introduced a new buffer page allocation logic during hibernation, in order to improve the performance. The amount of pages allocated was calculated based on total amount of pages available, although only non-high memory pages are usable for this purpose. This caused hibernation code to attempt to over allocate pages on platforms that have high memory, which led to hangs. Signed-off-by: Bojan Smojver Signed-off-by: Rafael J. Wysocki --- kernel/power/swap.c | 28 ++++++++++++++++++++++------ 1 file changed, 22 insertions(+), 6 deletions(-) diff --git a/kernel/power/swap.c b/kernel/power/swap.c index 8742fd013a9..eef311a58a6 100644 --- a/kernel/power/swap.c +++ b/kernel/power/swap.c @@ -51,6 +51,23 @@ #define MAP_PAGE_ENTRIES (PAGE_SIZE / sizeof(sector_t) - 1) +/* + * Number of free pages that are not high. + */ +static inline unsigned long low_free_pages(void) +{ + return nr_free_pages() - nr_free_highpages(); +} + +/* + * Number of pages required to be kept free while writing the image. Always + * half of all available low pages before the writing starts. + */ +static inline unsigned long reqd_free_pages(void) +{ + return low_free_pages() / 2; +} + struct swap_map_page { sector_t entries[MAP_PAGE_ENTRIES]; sector_t next_swap; @@ -72,7 +89,7 @@ struct swap_map_handle { sector_t cur_swap; sector_t first_sector; unsigned int k; - unsigned long nr_free_pages, written; + unsigned long reqd_free_pages; u32 crc32; }; @@ -316,8 +333,7 @@ static int get_swap_writer(struct swap_map_handle *handle) goto err_rel; } handle->k = 0; - handle->nr_free_pages = nr_free_pages() >> 1; - handle->written = 0; + handle->reqd_free_pages = reqd_free_pages(); handle->first_sector = handle->cur_swap; return 0; err_rel: @@ -352,11 +368,11 @@ static int swap_write_page(struct swap_map_handle *handle, void *buf, handle->cur_swap = offset; handle->k = 0; } - if (bio_chain && ++handle->written > handle->nr_free_pages) { + if (bio_chain && low_free_pages() <= handle->reqd_free_pages) { error = hib_wait_on_bio_chain(bio_chain); if (error) goto out; - handle->written = 0; + handle->reqd_free_pages = reqd_free_pages(); } out: return error; @@ -618,7 +634,7 @@ static int save_image_lzo(struct swap_map_handle *handle, * Adjust number of free pages after all allocations have been done. * We don't want to run out of pages when writing. */ - handle->nr_free_pages = nr_free_pages() >> 1; + handle->reqd_free_pages = reqd_free_pages(); /* * Start the CRC32 thread. -- cgit v1.2.3-18-g5258 From 840777de530ae96ee9a3022f7ec1d6c65abb26ac Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Tue, 24 Apr 2012 16:06:50 -0700 Subject: IB/mad: Set 'D' bit in response for unhandled MADs Commit 0b307043049f ("IB/mad: Return error response for unsupported MADs") does not handle directed-route MADs properly -- it fails to set the 'D' bit in the response MAD status field. This is a problem for SmInfo MADs when the receiver does not have an SM running. Reviewed-by: Hal Rosenstock Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier --- drivers/infiniband/core/mad.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c index 426bb7617ec..1c73d8aa4b9 100644 --- a/drivers/infiniband/core/mad.c +++ b/drivers/infiniband/core/mad.c @@ -1854,6 +1854,8 @@ static bool generate_unmatched_resp(struct ib_mad_private *recv, response->mad.mad.mad_hdr.method = IB_MGMT_METHOD_GET_RESP; response->mad.mad.mad_hdr.status = cpu_to_be16(IB_MGMT_MAD_STATUS_UNSUPPORTED_METHOD_ATTRIB); + if (recv->mad.mad.mad_hdr.mgmt_class == IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE) + response->mad.mad.mad_hdr.status |= IB_SMP_DIRECTION; return true; } else { -- cgit v1.2.3-18-g5258 From a9e7432319eb26ad90f18a7d215e50341d28ecb2 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Tue, 24 Apr 2012 16:08:57 -0700 Subject: IB/mad: Don't send response for failed MADs Commit 0b307043049f ("IB/mad: Return error response for unsupported MADs") does not failed MADs (eg those that return IB_MAD_RESULT_FAILURE) properly -- these MADs should be silently discarded. (We should not force the lower-layer drivers to return SUCCESS | CONSUMED in this case, since the MAD is NOT successful). Unsupported MADs are not failures -- they return SUCCESS, but with an "unsupported error" status value inside the response MAD. Reviewed-by: Hal Rosenstock Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier --- drivers/infiniband/core/mad.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c index 1c73d8aa4b9..b0d0bc8a6fb 100644 --- a/drivers/infiniband/core/mad.c +++ b/drivers/infiniband/core/mad.c @@ -1871,6 +1871,7 @@ static void ib_mad_recv_done_handler(struct ib_mad_port_private *port_priv, struct ib_mad_list_head *mad_list; struct ib_mad_agent_private *mad_agent; int port_num; + int ret = IB_MAD_RESULT_SUCCESS; mad_list = (struct ib_mad_list_head *)(unsigned long)wc->wr_id; qp_info = mad_list->mad_queue->qp_info; @@ -1954,8 +1955,6 @@ static void ib_mad_recv_done_handler(struct ib_mad_port_private *port_priv, local: /* Give driver "right of first refusal" on incoming MAD */ if (port_priv->device->process_mad) { - int ret; - ret = port_priv->device->process_mad(port_priv->device, 0, port_priv->port_num, wc, &recv->grh, @@ -1983,7 +1982,8 @@ local: * or via recv_handler in ib_mad_complete_recv() */ recv = NULL; - } else if (generate_unmatched_resp(recv, response)) { + } else if ((ret & IB_MAD_RESULT_SUCCESS) && + generate_unmatched_resp(recv, response)) { agent_send_response(&response->mad.mad, &recv->grh, wc, port_priv->device, port_num, qp_info->qp->qp_num); } -- cgit v1.2.3-18-g5258 From bf6b47deb40f9fc8ddb4573373dc9614aab59d35 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Wed, 11 Apr 2012 23:43:29 +0200 Subject: IB/mlx4: Fix memory leaks in ib_link_query_port() If the call to mlx4_MAD_IFC() fails in ib_link_query_port() we will currently do 'return err;' which will leak 'in_mad' and 'out_mad'. We should instead do 'goto out;' where we'll properly free the memory we previously allocated. Signed-off-by: Jesper Juhl Acked-by: Or Gerlitz Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx4/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c index 75d30562930..cc88c9c955c 100644 --- a/drivers/infiniband/hw/mlx4/main.c +++ b/drivers/infiniband/hw/mlx4/main.c @@ -247,7 +247,7 @@ static int ib_link_query_port(struct ib_device *ibdev, u8 port, err = mlx4_MAD_IFC(to_mdev(ibdev), 1, 1, port, NULL, NULL, in_mad, out_mad); if (err) - return err; + goto out; /* Checking LinkSpeedActive for FDR-10 */ if (out_mad->data[15] & 0x1) -- cgit v1.2.3-18-g5258 From 9b4d1cbb1391ae603c20cbf8c0beb66e38397196 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Tue, 24 Apr 2012 17:28:12 -0700 Subject: ARM: SAMSUNG: add missing MMC_CAP2_BROKEN_VOLTAGE capability Commit 6e8201f57c935 "mmc: core: add the capability for broken voltage" introduced a new quirk to indicate that MMC core should ignore voltage change errors reported by the regulators core. This is required to get SDHCI working on UniversalC210, NURI and GONI boards again after commit ceb6143b2df81c ("mmc: sdhci: fix vmmc handling"). Signed-off-by: Marek Szyprowski Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/mach-nuri.c | 1 + arch/arm/mach-exynos/mach-universal_c210.c | 1 + arch/arm/mach-s5pv210/mach-goni.c | 2 ++ 3 files changed, 4 insertions(+) diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index b4f1f902ce6..ed90aef404c 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -112,6 +112,7 @@ static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = { .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | MMC_CAP_ERASE), + .host_caps2 = MMC_CAP2_BROKEN_VOLTAGE, .cd_type = S3C_SDHCI_CD_PERMANENT, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 7ebf79c2ab3..cb2b027f09a 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -747,6 +747,7 @@ static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = { .max_width = 8, .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), + .host_caps2 = MMC_CAP2_BROKEN_VOLTAGE, .cd_type = S3C_SDHCI_CD_PERMANENT, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index a8933de3d62..32395664e87 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include @@ -765,6 +766,7 @@ static void __init goni_pmic_init(void) /* MoviNAND */ static struct s3c_sdhci_platdata goni_hsmmc0_data __initdata = { .max_width = 4, + .host_caps2 = MMC_CAP2_BROKEN_VOLTAGE, .cd_type = S3C_SDHCI_CD_PERMANENT, }; -- cgit v1.2.3-18-g5258 From c847382838ca503b6c55fb599160146221a2c141 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sun, 8 Apr 2012 16:26:19 -0700 Subject: dma: pl330: fix a couple of compilation warnings Move a couple of tests and do a minor refactor to avoid: drivers/dma/pl330.c: In function 'pl330_probe': drivers/dma/pl330.c:2929:215: warning: comparison of distinct pointer types lacks a cast [enabled by default] drivers/dma/pl330.c: In function 'pl330_tasklet': drivers/dma/pl330.c:2250:8: warning: 'pch' may be used uninitialized in this function [-Wuninitialized] drivers/dma/pl330.c:2228:25: note: 'pch' was declared here drivers/dma/pl330.c:2277:130: warning: 'pch' may be used uninitialized in this function [-Wuninitialized] drivers/dma/pl330.c:2260:25: note: 'pch' was declared here Signed-off-by: Olof Johansson Signed-off-by: Vinod Koul --- drivers/dma/pl330.c | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index 282caf118be..2ee6e23930a 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -2225,12 +2225,9 @@ static inline void free_desc_list(struct list_head *list) { struct dma_pl330_dmac *pdmac; struct dma_pl330_desc *desc; - struct dma_pl330_chan *pch; + struct dma_pl330_chan *pch = NULL; unsigned long flags; - if (list_empty(list)) - return; - /* Finish off the work list */ list_for_each_entry(desc, list, node) { dma_async_tx_callback callback; @@ -2247,6 +2244,10 @@ static inline void free_desc_list(struct list_head *list) desc->pchan = NULL; } + /* pch will be unset if list was empty */ + if (!pch) + return; + pdmac = pch->dmac; spin_lock_irqsave(&pdmac->pool_lock, flags); @@ -2257,12 +2258,9 @@ static inline void free_desc_list(struct list_head *list) static inline void handle_cyclic_desc_list(struct list_head *list) { struct dma_pl330_desc *desc; - struct dma_pl330_chan *pch; + struct dma_pl330_chan *pch = NULL; unsigned long flags; - if (list_empty(list)) - return; - list_for_each_entry(desc, list, node) { dma_async_tx_callback callback; @@ -2274,6 +2272,10 @@ static inline void handle_cyclic_desc_list(struct list_head *list) callback(desc->txd.callback_param); } + /* pch will be unset if list was empty */ + if (!pch) + return; + spin_lock_irqsave(&pch->lock, flags); list_splice_tail_init(list, &pch->work_list); spin_unlock_irqrestore(&pch->lock, flags); @@ -2926,8 +2928,11 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) INIT_LIST_HEAD(&pd->channels); /* Initialize channel parameters */ - num_chan = max(pdat ? pdat->nr_valid_peri : (u8)pi->pcfg.num_peri, - (u8)pi->pcfg.num_chan); + if (pdat) + num_chan = max_t(int, pdat->nr_valid_peri, pi->pcfg.num_chan); + else + num_chan = max_t(int, pi->pcfg.num_peri, pi->pcfg.num_chan); + pdmac->peripherals = kzalloc(num_chan * sizeof(*pch), GFP_KERNEL); for (i = 0; i < num_chan; i++) { -- cgit v1.2.3-18-g5258 From 88c08a3fba9954ce0ec3e1eab07c498a419ad7e3 Mon Sep 17 00:00:00 2001 From: Davide Ciminaghi Date: Thu, 19 Apr 2012 12:20:24 +0200 Subject: dmaengine/amba-pl08x : reset phychan_hold on terminate all When a client calls pl08x_control with DMA_TERMINATE_ALL, it is correct to terminate and release the phy channel currently in use (if one is in use), but the phychan_hold counter must also be reset (otherwise it could get trapped in an unbalanced state). Signed-off-by: Davide Ciminaghi Reviewed-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/amba-pl08x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index c301a8ec31a..3d704abd791 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1429,6 +1429,7 @@ static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, * signal */ release_phy_channel(plchan); + plchan->phychan_hold = 0; } /* Dequeue jobs and free LLIs */ if (plchan->at) { -- cgit v1.2.3-18-g5258 From d0d3bc65afcdd69bdd3b5bebdf8b3ee3680efa0e Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Tue, 24 Apr 2012 15:00:53 -0700 Subject: x86/mrst: Quiet sparse noise about plain integer as NULL pointer The second parameter to intel_scu_notifier_post is a void *, not an integer. This quiets the sparse noise: arch/x86/platform/mrst/mrst.c:808:48: warning: Using plain integer as NULL pointer arch/x86/platform/mrst/mrst.c:817:43: warning: Using plain integer as NULL pointer Signed-off-by: H Hartley Sweeten Acked-by: Alan Cox Link: http://lkml.kernel.org/r/201204241500.53685.hartleys@visionengravers.com Signed-off-by: Ingo Molnar --- arch/x86/platform/mrst/mrst.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c index e0a37233c0a..e31bcd8f2ee 100644 --- a/arch/x86/platform/mrst/mrst.c +++ b/arch/x86/platform/mrst/mrst.c @@ -805,7 +805,7 @@ void intel_scu_devices_create(void) } else i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1); } - intel_scu_notifier_post(SCU_AVAILABLE, 0L); + intel_scu_notifier_post(SCU_AVAILABLE, NULL); } EXPORT_SYMBOL_GPL(intel_scu_devices_create); @@ -814,7 +814,7 @@ void intel_scu_devices_destroy(void) { int i; - intel_scu_notifier_post(SCU_DOWN, 0L); + intel_scu_notifier_post(SCU_DOWN, NULL); for (i = 0; i < ipc_next_dev; i++) platform_device_del(ipc_devs[i]); -- cgit v1.2.3-18-g5258 From ea0dcf903e7d76aa5d483d876215fedcfdfe140f Mon Sep 17 00:00:00 2001 From: Greg Pearson Date: Tue, 24 Apr 2012 18:23:56 -0600 Subject: x86/apic: Use x2apic physical mode based on FADT setting Provide systems that do not support x2apic cluster mode a mechanism to select x2apic physical mode using the FADT FORCE_APIC_PHYSICAL_DESTINATION_MODE bit. Changes from v1: (based on Suresh's comments) - removed #ifdef CONFIG_ACPI - removed #include Signed-off-by: Greg Pearson Acked-by: Suresh Siddha Link: http://lkml.kernel.org/r/1335313436-32020-1-git-send-email-greg.pearson@hp.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/x2apic_phys.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c index 8a778db45e3..991e315f422 100644 --- a/arch/x86/kernel/apic/x2apic_phys.c +++ b/arch/x86/kernel/apic/x2apic_phys.c @@ -24,6 +24,12 @@ static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id) { if (x2apic_phys) return x2apic_enabled(); + else if ((acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID) && + (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL) && + x2apic_enabled()) { + printk(KERN_DEBUG "System requires x2apic physical mode\n"); + return 1; + } else return 0; } -- cgit v1.2.3-18-g5258 From a99cd1125189aaf31a7ee505d6208143482119eb Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Fri, 6 Apr 2012 12:53:50 -0400 Subject: init: fix bug where environment vars can't be passed via boot args Commit 026cee0086f had the side-effect of dropping the '=' from the unknown boot arguments that are passed to init as environment variables. This is because parse_args() puts a NUL in the string where the '=' was when it passes the "param" and "val" pointers to the parsing subfunctions. Previously, unknown_bootoption() was the last parse_args() subfunction to run, and it carefully put back the '=' character. Now the ignore_unknown_bootoption() is the last one to run, and it wasn't doing the necessary repair, so the envp params ended up with the embedded NUL and were no longer seen as valid environment variables by init. Tested-by: Woody Suwalski Acked-by: Pawel Moll Signed-off-by: Chris Metcalf --- init/main.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) diff --git a/init/main.c b/init/main.c index 9d454f09f3b..44b2433334c 100644 --- a/init/main.c +++ b/init/main.c @@ -225,13 +225,9 @@ static int __init loglevel(char *str) early_param("loglevel", loglevel); -/* - * Unknown boot options get handed to init, unless they look like - * unused parameters (modprobe will find them in /proc/cmdline). - */ -static int __init unknown_bootoption(char *param, char *val) +/* Change NUL term back to "=", to make "param" the whole string. */ +static int __init repair_env_string(char *param, char *val) { - /* Change NUL term back to "=", to make "param" the whole string. */ if (val) { /* param=val or param="val"? */ if (val == param+strlen(param)+1) @@ -243,6 +239,16 @@ static int __init unknown_bootoption(char *param, char *val) } else BUG(); } + return 0; +} + +/* + * Unknown boot options get handed to init, unless they look like + * unused parameters (modprobe will find them in /proc/cmdline). + */ +static int __init unknown_bootoption(char *param, char *val) +{ + repair_env_string(param, val); /* Handle obsolete-style parameters */ if (obsolete_checksetup(param)) @@ -732,11 +738,6 @@ static char *initcall_level_names[] __initdata = { "late parameters", }; -static int __init ignore_unknown_bootoption(char *param, char *val) -{ - return 0; -} - static void __init do_initcall_level(int level) { extern const struct kernel_param __start___param[], __stop___param[]; @@ -747,7 +748,7 @@ static void __init do_initcall_level(int level) static_command_line, __start___param, __stop___param - __start___param, level, level, - ignore_unknown_bootoption); + repair_env_string); for (fn = initcall_levels[level]; fn < initcall_levels[level+1]; fn++) do_one_initcall(*fn); -- cgit v1.2.3-18-g5258 From 05ef1b79d46347f94d9a78214cc745046c03e45a Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Wed, 25 Apr 2012 12:45:26 -0400 Subject: arch/tile: fix a couple of functions that should be __init They were marked __devinit by mistake, causing some warnings at link time. Signed-off-by: Chris Metcalf --- arch/tile/include/asm/pci.h | 4 ++-- arch/tile/kernel/pci.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/tile/include/asm/pci.h b/arch/tile/include/asm/pci.h index 5d5a635530b..32e6cbe8dff 100644 --- a/arch/tile/include/asm/pci.h +++ b/arch/tile/include/asm/pci.h @@ -47,8 +47,8 @@ struct pci_controller { */ #define PCI_DMA_BUS_IS_PHYS 1 -int __devinit tile_pci_init(void); -int __devinit pcibios_init(void); +int __init tile_pci_init(void); +int __init pcibios_init(void); static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {} diff --git a/arch/tile/kernel/pci.c b/arch/tile/kernel/pci.c index a1bb59eecc1..b56d12bf590 100644 --- a/arch/tile/kernel/pci.c +++ b/arch/tile/kernel/pci.c @@ -141,7 +141,7 @@ static int __devinit tile_init_irqs(int controller_id, * * Returns the number of controllers discovered. */ -int __devinit tile_pci_init(void) +int __init tile_pci_init(void) { int i; @@ -287,7 +287,7 @@ static void __devinit fixup_read_and_payload_sizes(void) * The controllers have been set up by the time we get here, by a call to * tile_pci_init. */ -int __devinit pcibios_init(void) +int __init pcibios_init(void) { int i; -- cgit v1.2.3-18-g5258 From a05a4830a32ef9f89e7bd372a7bae9b96b1ac266 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Wed, 25 Apr 2012 12:46:50 -0400 Subject: keys: update the documentation with info about "logon" keys Acked-by: David Howells Signed-off-by: Jeff Layton --- Documentation/security/keys.txt | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/Documentation/security/keys.txt b/Documentation/security/keys.txt index 78771709142..d389acd31e1 100644 --- a/Documentation/security/keys.txt +++ b/Documentation/security/keys.txt @@ -123,7 +123,7 @@ KEY SERVICE OVERVIEW The key service provides a number of features besides keys: - (*) The key service defines two special key types: + (*) The key service defines three special key types: (+) "keyring" @@ -137,6 +137,18 @@ The key service provides a number of features besides keys: blobs of data. These can be created, updated and read by userspace, and aren't intended for use by kernel services. + (+) "logon" + + Like a "user" key, a "logon" key has a payload that is an arbitrary + blob of data. It is intended as a place to store secrets which are + accessible to the kernel but not to userspace programs. + + The description can be arbitrary, but must be prefixed with a non-zero + length string that describes the key "subclass". The subclass is + separated from the rest of the description by a ':'. "logon" keys can + be created and updated from userspace, but the payload is only + readable from kernel space. + (*) Each process subscribes to three keyrings: a thread-specific keyring, a process-specific keyring, and a session-specific keyring. -- cgit v1.2.3-18-g5258 From 4e1c2b284461fd8aa8d7b295a1e911fc4390755b Mon Sep 17 00:00:00 2001 From: David Miller Date: Wed, 25 Apr 2012 16:10:50 -0400 Subject: mm: nobootmem: Correct alloc_bootmem semantics. The comments above __alloc_bootmem_node() claim that the code will first try the allocation using 'goal' and if that fails it will try again but with the 'goal' requirement dropped. Unfortunately, this is not what the code does, so fix it to do so. This is important for nobootmem conversions to architectures such as sparc where MAX_DMA_ADDRESS is infinity. On such architectures all of the allocations done by generic spots, such as the sparse-vmemmap implementation, will pass in: __pa(MAX_DMA_ADDRESS) as the goal, and with the limit given as "-1" this will always fail unless we add the appropriate fallback logic here. Signed-off-by: David S. Miller Acked-by: Yinghai Lu Signed-off-by: Linus Torvalds --- mm/nobootmem.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/mm/nobootmem.c b/mm/nobootmem.c index 24f0fc1a56d..e53bb8a256b 100644 --- a/mm/nobootmem.c +++ b/mm/nobootmem.c @@ -298,13 +298,19 @@ void * __init __alloc_bootmem_node(pg_data_t *pgdat, unsigned long size, if (WARN_ON_ONCE(slab_is_available())) return kzalloc_node(size, GFP_NOWAIT, pgdat->node_id); +again: ptr = __alloc_memory_core_early(pgdat->node_id, size, align, goal, -1ULL); if (ptr) return ptr; - return __alloc_memory_core_early(MAX_NUMNODES, size, align, - goal, -1ULL); + ptr = __alloc_memory_core_early(MAX_NUMNODES, size, align, + goal, -1ULL); + if (!ptr && goal) { + goal = 0; + goto again; + } + return ptr; } void * __init __alloc_bootmem_node_high(pg_data_t *pgdat, unsigned long size, -- cgit v1.2.3-18-g5258 From ce587e65e8c669eec61df7fb1c515720302e3cc0 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Tue, 24 Apr 2012 20:22:33 +0200 Subject: mm: memcg: move pc lookup point to commit_charge() None of the callsites actually need the page_cgroup descriptor themselves, so just pass the page and do the look up in there. We already had two bugs (6568d4a 'mm: memcg: update the correct soft limit tree during migration' and 'memcg: fix Bad page state after replace_page_cache') where the passed page and pc were not referring to the same page frame. Signed-off-by: Johannes Weiner Acked-by: Hugh Dickins Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 17 +++++------------ 1 file changed, 5 insertions(+), 12 deletions(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index b868def9bcc..31ab9c3f017 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -2476,10 +2476,10 @@ struct mem_cgroup *try_get_mem_cgroup_from_page(struct page *page) static void __mem_cgroup_commit_charge(struct mem_cgroup *memcg, struct page *page, unsigned int nr_pages, - struct page_cgroup *pc, enum charge_type ctype, bool lrucare) { + struct page_cgroup *pc = lookup_page_cgroup(page); struct zone *uninitialized_var(zone); bool was_on_lru = false; bool anon; @@ -2716,7 +2716,6 @@ static int mem_cgroup_charge_common(struct page *page, struct mm_struct *mm, { struct mem_cgroup *memcg = NULL; unsigned int nr_pages = 1; - struct page_cgroup *pc; bool oom = true; int ret; @@ -2730,11 +2729,10 @@ static int mem_cgroup_charge_common(struct page *page, struct mm_struct *mm, oom = false; } - pc = lookup_page_cgroup(page); ret = __mem_cgroup_try_charge(mm, gfp_mask, nr_pages, &memcg, oom); if (ret == -ENOMEM) return ret; - __mem_cgroup_commit_charge(memcg, page, nr_pages, pc, ctype, false); + __mem_cgroup_commit_charge(memcg, page, nr_pages, ctype, false); return 0; } @@ -2831,16 +2829,13 @@ static void __mem_cgroup_commit_charge_swapin(struct page *page, struct mem_cgroup *memcg, enum charge_type ctype) { - struct page_cgroup *pc; - if (mem_cgroup_disabled()) return; if (!memcg) return; cgroup_exclude_rmdir(&memcg->css); - pc = lookup_page_cgroup(page); - __mem_cgroup_commit_charge(memcg, page, 1, pc, ctype, true); + __mem_cgroup_commit_charge(memcg, page, 1, ctype, true); /* * Now swap is on-memory. This means this page may be * counted both as mem and swap....double count. @@ -3298,14 +3293,13 @@ int mem_cgroup_prepare_migration(struct page *page, * page. In the case new page is migrated but not remapped, new page's * mapcount will be finally 0 and we call uncharge in end_migration(). */ - pc = lookup_page_cgroup(newpage); if (PageAnon(page)) ctype = MEM_CGROUP_CHARGE_TYPE_MAPPED; else if (page_is_file_cache(page)) ctype = MEM_CGROUP_CHARGE_TYPE_CACHE; else ctype = MEM_CGROUP_CHARGE_TYPE_SHMEM; - __mem_cgroup_commit_charge(memcg, newpage, 1, pc, ctype, false); + __mem_cgroup_commit_charge(memcg, newpage, 1, ctype, false); return ret; } @@ -3392,8 +3386,7 @@ void mem_cgroup_replace_page_cache(struct page *oldpage, * the newpage may be on LRU(or pagevec for LRU) already. We lock * LRU while we overwrite pc->mem_cgroup. */ - pc = lookup_page_cgroup(newpage); - __mem_cgroup_commit_charge(memcg, newpage, 1, pc, type, true); + __mem_cgroup_commit_charge(memcg, newpage, 1, type, true); } #ifdef CONFIG_DEBUG_VM -- cgit v1.2.3-18-g5258 From b1c12cbcd0a02527c180a862e8971e249d3b347d Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Wed, 25 Apr 2012 16:01:46 -0700 Subject: mm/hugetlb: fix warning in alloc_huge_page/dequeue_huge_page_vma Fix a gcc warning (and bug?) introduced in cc9a6c877 ("cpuset: mm: reduce large amounts of memory barrier related damage v3") Local variable "page" can be uninitialized if the nodemask from vma policy does not intersects with nodemask from cpuset. Even if it doesn't happens it is better to initialize this variable explicitly than to introduce a kernel oops in a weird corner case. mm/hugetlb.c: In function `alloc_huge_page': mm/hugetlb.c:1135:5: warning: `page' may be used uninitialized in this function Signed-off-by: Konstantin Khlebnikov Acked-by: Mel Gorman Acked-by: David Rientjes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/hugetlb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index cd65cb19c94..5a16423a512 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -532,7 +532,7 @@ static struct page *dequeue_huge_page_vma(struct hstate *h, struct vm_area_struct *vma, unsigned long address, int avoid_reserve) { - struct page *page; + struct page *page = NULL; struct mempolicy *mpol; nodemask_t *nodemask; struct zonelist *zonelist; -- cgit v1.2.3-18-g5258 From 13d518074a952d33d47c428419693f63389547e9 Mon Sep 17 00:00:00 2001 From: Jason Baron Date: Wed, 25 Apr 2012 16:01:47 -0700 Subject: epoll: clear the tfile_check_list on -ELOOP An epoll_ctl(,EPOLL_CTL_ADD,,) operation can return '-ELOOP' to prevent circular epoll dependencies from being created. However, in that case we do not properly clear the 'tfile_check_list'. Thus, add a call to clear_tfile_check_list() for the -ELOOP case. Signed-off-by: Jason Baron Reported-by: Yurij M. Plotnikov Cc: Nelson Elhage Cc: Davide Libenzi Tested-by: Alexandra N. Kossovsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/eventpoll.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/eventpoll.c b/fs/eventpoll.c index 739b0985b39..c0b3c70ee87 100644 --- a/fs/eventpoll.c +++ b/fs/eventpoll.c @@ -1663,8 +1663,10 @@ SYSCALL_DEFINE4(epoll_ctl, int, epfd, int, op, int, fd, if (op == EPOLL_CTL_ADD) { if (is_file_epoll(tfile)) { error = -ELOOP; - if (ep_loop_check(ep, tfile) != 0) + if (ep_loop_check(ep, tfile) != 0) { + clear_tfile_check_list(); goto error_tgt_fput; + } } else list_add(&tfile->f_tfile_llink, &tfile_check_list); } -- cgit v1.2.3-18-g5258 From 904249aa68010c8e223263c922fcbb840a3f42e4 Mon Sep 17 00:00:00 2001 From: Ying Han Date: Wed, 25 Apr 2012 16:01:48 -0700 Subject: mm: fix up the vmscan stat in vmstat The "pgsteal" stat is confusing because it counts both direct reclaim as well as background reclaim. However, we have "kswapd_steal" which also counts background reclaim value. This patch fixes it and also makes it match the existng "pgscan_" stats. Test: pgsteal_kswapd_dma32 447623 pgsteal_kswapd_normal 42272677 pgsteal_kswapd_movable 0 pgsteal_direct_dma32 2801 pgsteal_direct_normal 44353270 pgsteal_direct_movable 0 Signed-off-by: Ying Han Reviewed-by: Rik van Riel Acked-by: Christoph Lameter Cc: Johannes Weiner Cc: Michal Hocko Cc: Mel Gorman Acked-by: KAMEZAWA Hiroyuki Cc: Hillf Danton Cc: Hugh Dickins Cc: Dan Magenheimer Reviewed-by: Minchan Kim Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/vm_event_item.h | 5 +++-- mm/vmscan.c | 11 ++++++++--- mm/vmstat.c | 4 ++-- 3 files changed, 13 insertions(+), 7 deletions(-) diff --git a/include/linux/vm_event_item.h b/include/linux/vm_event_item.h index 03b90cdc192..06f8e385825 100644 --- a/include/linux/vm_event_item.h +++ b/include/linux/vm_event_item.h @@ -26,13 +26,14 @@ enum vm_event_item { PGPGIN, PGPGOUT, PSWPIN, PSWPOUT, PGFREE, PGACTIVATE, PGDEACTIVATE, PGFAULT, PGMAJFAULT, FOR_ALL_ZONES(PGREFILL), - FOR_ALL_ZONES(PGSTEAL), + FOR_ALL_ZONES(PGSTEAL_KSWAPD), + FOR_ALL_ZONES(PGSTEAL_DIRECT), FOR_ALL_ZONES(PGSCAN_KSWAPD), FOR_ALL_ZONES(PGSCAN_DIRECT), #ifdef CONFIG_NUMA PGSCAN_ZONE_RECLAIM_FAILED, #endif - PGINODESTEAL, SLABS_SCANNED, KSWAPD_STEAL, KSWAPD_INODESTEAL, + PGINODESTEAL, SLABS_SCANNED, KSWAPD_INODESTEAL, KSWAPD_LOW_WMARK_HIT_QUICKLY, KSWAPD_HIGH_WMARK_HIT_QUICKLY, KSWAPD_SKIP_CONGESTION_WAIT, PAGEOUTRUN, ALLOCSTALL, PGROTATED, diff --git a/mm/vmscan.c b/mm/vmscan.c index 1a518684a32..33dc256033b 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -1568,9 +1568,14 @@ shrink_inactive_list(unsigned long nr_to_scan, struct mem_cgroup_zone *mz, reclaim_stat->recent_scanned[0] += nr_anon; reclaim_stat->recent_scanned[1] += nr_file; - if (current_is_kswapd()) - __count_vm_events(KSWAPD_STEAL, nr_reclaimed); - __count_zone_vm_events(PGSTEAL, zone, nr_reclaimed); + if (global_reclaim(sc)) { + if (current_is_kswapd()) + __count_zone_vm_events(PGSTEAL_KSWAPD, zone, + nr_reclaimed); + else + __count_zone_vm_events(PGSTEAL_DIRECT, zone, + nr_reclaimed); + } putback_inactive_pages(mz, &page_list); diff --git a/mm/vmstat.c b/mm/vmstat.c index f600557a765..7db1b9bab49 100644 --- a/mm/vmstat.c +++ b/mm/vmstat.c @@ -738,7 +738,8 @@ const char * const vmstat_text[] = { "pgmajfault", TEXTS_FOR_ZONES("pgrefill") - TEXTS_FOR_ZONES("pgsteal") + TEXTS_FOR_ZONES("pgsteal_kswapd") + TEXTS_FOR_ZONES("pgsteal_direct") TEXTS_FOR_ZONES("pgscan_kswapd") TEXTS_FOR_ZONES("pgscan_direct") @@ -747,7 +748,6 @@ const char * const vmstat_text[] = { #endif "pginodesteal", "slabs_scanned", - "kswapd_steal", "kswapd_inodesteal", "kswapd_low_wmark_hit_quickly", "kswapd_high_wmark_hit_quickly", -- cgit v1.2.3-18-g5258 From 61065a30af8df4b8989c2ac7a1f4b4034e4df2d5 Mon Sep 17 00:00:00 2001 From: Glauber Costa Date: Wed, 25 Apr 2012 16:01:48 -0700 Subject: fs/buffer.c: remove BUG() in possible but rare condition While stressing the kernel with with failing allocations today, I hit the following chain of events: alloc_page_buffers(): bh = alloc_buffer_head(GFP_NOFS); if (!bh) goto no_grow; <= path taken grow_dev_page(): bh = alloc_page_buffers(page, size, 0); if (!bh) goto failed; <= taken, consequence of the above and then the failed path BUG()s the kernel. The failure is inserted a litte bit artificially, but even then, I see no reason why it should be deemed impossible in a real box. Even though this is not a condition that we expect to see around every time, failed allocations are expected to be handled, and BUG() sounds just too much. As a matter of fact, grow_dev_page() can return NULL just fine in other circumstances, so I propose we just remove it, then. Signed-off-by: Glauber Costa Cc: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/buffer.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/buffer.c b/fs/buffer.c index 36d66653b93..351e18ea2e5 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -985,7 +985,6 @@ grow_dev_page(struct block_device *bdev, sector_t block, return page; failed: - BUG(); unlock_page(page); page_cache_release(page); return NULL; -- cgit v1.2.3-18-g5258 From e39a9ba2889edbfbda4a9336ea718b2e25a9c2b2 Mon Sep 17 00:00:00 2001 From: Clay Carpenter Date: Wed, 25 Apr 2012 16:01:49 -0700 Subject: acerhdf: add support for Aspire 1410 BIOS v1.3314 Add support for Aspire 1410 BIOS v1.3314. Fixes the following error: acerhdf: unknown (unsupported) BIOS version Acer/Aspire 1410/v1.3314, please report, aborting! Signed-off-by: Clay Carpenter Signed-off-by: Peter Feuerer Cc: Matthew Garrett Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/platform/x86/acerhdf.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c index bc8384c6f3e..9a193496497 100644 --- a/drivers/platform/x86/acerhdf.c +++ b/drivers/platform/x86/acerhdf.c @@ -161,6 +161,7 @@ static const struct bios_settings_t bios_tbl[] = { {"Acer", "Aspire 1410", "v1.3303", 0x55, 0x58, {0x9e, 0x00} }, {"Acer", "Aspire 1410", "v1.3308", 0x55, 0x58, {0x9e, 0x00} }, {"Acer", "Aspire 1410", "v1.3310", 0x55, 0x58, {0x9e, 0x00} }, + {"Acer", "Aspire 1410", "v1.3314", 0x55, 0x58, {0x9e, 0x00} }, /* Acer 1810xx */ {"Acer", "Aspire 1810TZ", "v0.3108", 0x55, 0x58, {0x9e, 0x00} }, {"Acer", "Aspire 1810T", "v0.3108", 0x55, 0x58, {0x9e, 0x00} }, -- cgit v1.2.3-18-g5258 From 43ae1e32e0b540fa04f059b7aa3b4f5cf49fc9ad Mon Sep 17 00:00:00 2001 From: Peter Feuerer Date: Wed, 25 Apr 2012 16:01:49 -0700 Subject: acerhdf: add support for new hardware Add support for new hardware: Acer Aspire LT-10Q/531/751/1810/1825, Acer Travelmate 7730, Packard Bell ENBFT/DOTVR46 Signed-off-by: Peter Feuerer Acked-by: Borislav Petkov Cc: Matthew Garrett Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/platform/x86/acerhdf.c | 62 ++++++++++++++++++++++++++++-------------- 1 file changed, 42 insertions(+), 20 deletions(-) diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c index 9a193496497..c697d807ea0 100644 --- a/drivers/platform/x86/acerhdf.c +++ b/drivers/platform/x86/acerhdf.c @@ -50,7 +50,7 @@ */ #undef START_IN_KERNEL_MODE -#define DRV_VER "0.5.24" +#define DRV_VER "0.5.26" /* * According to the Atom N270 datasheet, @@ -150,6 +150,8 @@ static const struct bios_settings_t bios_tbl[] = { {"Acer", "AOA150", "v0.3308", 0x55, 0x58, {0x20, 0x00} }, {"Acer", "AOA150", "v0.3309", 0x55, 0x58, {0x20, 0x00} }, {"Acer", "AOA150", "v0.3310", 0x55, 0x58, {0x20, 0x00} }, + /* LT1005u */ + {"Acer", "LT-10Q", "v0.3310", 0x55, 0x58, {0x20, 0x00} }, /* Acer 1410 */ {"Acer", "Aspire 1410", "v0.3108", 0x55, 0x58, {0x9e, 0x00} }, {"Acer", "Aspire 1410", "v0.3113", 0x55, 0x58, {0x9e, 0x00} }, @@ -184,29 +186,44 @@ static const struct bios_settings_t bios_tbl[] = { {"Acer", "Aspire 1810TZ", "v1.3310", 0x55, 0x58, {0x9e, 0x00} }, {"Acer", "Aspire 1810T", "v1.3310", 0x55, 0x58, {0x9e, 0x00} }, {"Acer", "Aspire 1810TZ", "v1.3314", 0x55, 0x58, {0x9e, 0x00} }, + {"Acer", "Aspire 1810T", "v1.3314", 0x55, 0x58, {0x9e, 0x00} }, /* Acer 531 */ + {"Acer", "AO531h", "v0.3104", 0x55, 0x58, {0x20, 0x00} }, {"Acer", "AO531h", "v0.3201", 0x55, 0x58, {0x20, 0x00} }, + {"Acer", "AO531h", "v0.3304", 0x55, 0x58, {0x20, 0x00} }, + /* Acer 751 */ + {"Acer", "AO751h", "V0.3212", 0x55, 0x58, {0x21, 0x00} }, + /* Acer 1825 */ + {"Acer", "Aspire 1825PTZ", "V1.3118", 0x55, 0x58, {0x9e, 0x00} }, + {"Acer", "Aspire 1825PTZ", "V1.3127", 0x55, 0x58, {0x9e, 0x00} }, + /* Acer TravelMate 7730 */ + {"Acer", "TravelMate 7730G", "v0.3509", 0x55, 0x58, {0xaf, 0x00} }, /* Gateway */ - {"Gateway", "AOA110", "v0.3103", 0x55, 0x58, {0x21, 0x00} }, - {"Gateway", "AOA150", "v0.3103", 0x55, 0x58, {0x20, 0x00} }, - {"Gateway", "LT31", "v1.3103", 0x55, 0x58, {0x9e, 0x00} }, - {"Gateway", "LT31", "v1.3201", 0x55, 0x58, {0x9e, 0x00} }, - {"Gateway", "LT31", "v1.3302", 0x55, 0x58, {0x9e, 0x00} }, + {"Gateway", "AOA110", "v0.3103", 0x55, 0x58, {0x21, 0x00} }, + {"Gateway", "AOA150", "v0.3103", 0x55, 0x58, {0x20, 0x00} }, + {"Gateway", "LT31", "v1.3103", 0x55, 0x58, {0x9e, 0x00} }, + {"Gateway", "LT31", "v1.3201", 0x55, 0x58, {0x9e, 0x00} }, + {"Gateway", "LT31", "v1.3302", 0x55, 0x58, {0x9e, 0x00} }, + {"Gateway", "LT31", "v1.3303t", 0x55, 0x58, {0x9e, 0x00} }, /* Packard Bell */ - {"Packard Bell", "DOA150", "v0.3104", 0x55, 0x58, {0x21, 0x00} }, - {"Packard Bell", "DOA150", "v0.3105", 0x55, 0x58, {0x20, 0x00} }, - {"Packard Bell", "AOA110", "v0.3105", 0x55, 0x58, {0x21, 0x00} }, - {"Packard Bell", "AOA150", "v0.3105", 0x55, 0x58, {0x20, 0x00} }, - {"Packard Bell", "DOTMU", "v1.3303", 0x55, 0x58, {0x9e, 0x00} }, - {"Packard Bell", "DOTMU", "v0.3120", 0x55, 0x58, {0x9e, 0x00} }, - {"Packard Bell", "DOTMU", "v0.3108", 0x55, 0x58, {0x9e, 0x00} }, - {"Packard Bell", "DOTMU", "v0.3113", 0x55, 0x58, {0x9e, 0x00} }, - {"Packard Bell", "DOTMU", "v0.3115", 0x55, 0x58, {0x9e, 0x00} }, - {"Packard Bell", "DOTMU", "v0.3117", 0x55, 0x58, {0x9e, 0x00} }, - {"Packard Bell", "DOTMU", "v0.3119", 0x55, 0x58, {0x9e, 0x00} }, - {"Packard Bell", "DOTMU", "v1.3204", 0x55, 0x58, {0x9e, 0x00} }, - {"Packard Bell", "DOTMA", "v1.3201", 0x55, 0x58, {0x9e, 0x00} }, - {"Packard Bell", "DOTMA", "v1.3302", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOA150", "v0.3104", 0x55, 0x58, {0x21, 0x00} }, + {"Packard Bell", "DOA150", "v0.3105", 0x55, 0x58, {0x20, 0x00} }, + {"Packard Bell", "AOA110", "v0.3105", 0x55, 0x58, {0x21, 0x00} }, + {"Packard Bell", "AOA150", "v0.3105", 0x55, 0x58, {0x20, 0x00} }, + {"Packard Bell", "ENBFT", "V1.3118", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "ENBFT", "V1.3127", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTMU", "v1.3303", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTMU", "v0.3120", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTMU", "v0.3108", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTMU", "v0.3113", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTMU", "v0.3115", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTMU", "v0.3117", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTMU", "v0.3119", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTMU", "v1.3204", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTMA", "v1.3201", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTMA", "v1.3302", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTMA", "v1.3303t", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTVR46", "v1.3308", 0x55, 0x58, {0x9e, 0x00} }, /* pewpew-terminator */ {"", "", "", 0, 0, {0, 0} } }; @@ -702,15 +719,20 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Peter Feuerer"); MODULE_DESCRIPTION("Aspire One temperature and fan driver"); MODULE_ALIAS("dmi:*:*Acer*:pnAOA*:"); +MODULE_ALIAS("dmi:*:*Acer*:pnAO751h*:"); MODULE_ALIAS("dmi:*:*Acer*:pnAspire*1410*:"); MODULE_ALIAS("dmi:*:*Acer*:pnAspire*1810*:"); +MODULE_ALIAS("dmi:*:*Acer*:pnAspire*1825PTZ:"); MODULE_ALIAS("dmi:*:*Acer*:pnAO531*:"); +MODULE_ALIAS("dmi:*:*Acer*:TravelMate*7730G:"); MODULE_ALIAS("dmi:*:*Gateway*:pnAOA*:"); MODULE_ALIAS("dmi:*:*Gateway*:pnLT31*:"); MODULE_ALIAS("dmi:*:*Packard*Bell*:pnAOA*:"); MODULE_ALIAS("dmi:*:*Packard*Bell*:pnDOA*:"); MODULE_ALIAS("dmi:*:*Packard*Bell*:pnDOTMU*:"); +MODULE_ALIAS("dmi:*:*Packard*Bell*:pnENBFT*:"); MODULE_ALIAS("dmi:*:*Packard*Bell*:pnDOTMA*:"); +MODULE_ALIAS("dmi:*:*Packard*Bell*:pnDOTVR46*:"); module_init(acerhdf_init); module_exit(acerhdf_exit); -- cgit v1.2.3-18-g5258 From 351963bb58af5717359544087b9f634c27b9b155 Mon Sep 17 00:00:00 2001 From: Peter Feuerer Date: Wed, 25 Apr 2012 16:01:49 -0700 Subject: acerhdf: lowered default temp fanon/fanoff values Due to new supported hardware, of which the actual temperature limits of processor, harddisk and other components are unknown, it feels safer with lower fanon / fanoff settings. It won't change much for most people, already using acerhdf, as they use their own fanon/fanoff variable settings when loading the module. Furthermore seems like kernel and userspace tools have been improved to work more efficient and netbooks don't get so hot anymore. Signed-off-by: Peter Feuerer Acked-by: Borislav Petkov Cc: Matthew Garrett Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/platform/x86/acerhdf.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c index c697d807ea0..639db4d0aa7 100644 --- a/drivers/platform/x86/acerhdf.c +++ b/drivers/platform/x86/acerhdf.c @@ -83,8 +83,8 @@ static int kernelmode; #endif static unsigned int interval = 10; -static unsigned int fanon = 63000; -static unsigned int fanoff = 58000; +static unsigned int fanon = 60000; +static unsigned int fanoff = 53000; static unsigned int verbose; static unsigned int fanstate = ACERHDF_FAN_AUTO; static char force_bios[16]; -- cgit v1.2.3-18-g5258 From 65ed76010dfed3cb75c863c9052c367a1bacf80a Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Wed, 25 Apr 2012 16:01:50 -0700 Subject: hugetlbfs: lockdep annotate root inode properly This fixes the below reported false lockdep warning. e096d0c7e2e4 ("lockdep: Add helper function for dir vs file i_mutex annotation") added a similar annotation for every other inode in hugetlbfs but missed the root inode because it was allocated by a separate function. For HugeTLB fs we allow taking i_mutex in mmap. HugeTLB fs doesn't support file write and its file read callback is modified in a05b0855fd ("hugetlbfs: avoid taking i_mutex from hugetlbfs_read()") to not take i_mutex. Hence for HugeTLB fs with regular files we really don't take i_mutex with mmap_sem held. ====================================================== [ INFO: possible circular locking dependency detected ] 3.4.0-rc1+ #322 Not tainted ------------------------------------------------------- bash/1572 is trying to acquire lock: (&mm->mmap_sem){++++++}, at: [] might_fault+0x40/0x90 but task is already holding lock: (&sb->s_type->i_mutex_key#12){+.+.+.}, at: [] vfs_readdir+0x56/0xa8 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&sb->s_type->i_mutex_key#12){+.+.+.}: [] lock_acquire+0xd5/0xfa [] __mutex_lock_common+0x48/0x350 [] mutex_lock_nested+0x2a/0x31 [] hugetlbfs_file_mmap+0x7d/0x104 [] mmap_region+0x272/0x47d [] do_mmap_pgoff+0x294/0x2ee [] sys_mmap_pgoff+0xd2/0x10e [] sys_mmap+0x1d/0x1f [] system_call_fastpath+0x16/0x1b -> #0 (&mm->mmap_sem){++++++}: [] __lock_acquire+0xa81/0xd75 [] lock_acquire+0xd5/0xfa [] might_fault+0x6d/0x90 [] filldir+0x6a/0xc2 [] dcache_readdir+0x5c/0x222 [] vfs_readdir+0x76/0xa8 [] sys_getdents+0x79/0xc9 [] system_call_fastpath+0x16/0x1b other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&sb->s_type->i_mutex_key#12); lock(&mm->mmap_sem); lock(&sb->s_type->i_mutex_key#12); lock(&mm->mmap_sem); *** DEADLOCK *** 1 lock held by bash/1572: #0: (&sb->s_type->i_mutex_key#12){+.+.+.}, at: [] vfs_readdir+0x56/0xa8 stack backtrace: Pid: 1572, comm: bash Not tainted 3.4.0-rc1+ #322 Call Trace: [] print_circular_bug+0x1f8/0x209 [] __lock_acquire+0xa81/0xd75 [] ? handle_pte_fault+0x5ff/0x614 [] ? mark_lock+0x2d/0x258 [] ? might_fault+0x40/0x90 [] lock_acquire+0xd5/0xfa [] ? might_fault+0x40/0x90 [] ? __mutex_lock_common+0x333/0x350 [] might_fault+0x6d/0x90 [] ? might_fault+0x40/0x90 [] filldir+0x6a/0xc2 [] dcache_readdir+0x5c/0x222 [] ? sys_ioctl+0x74/0x74 [] ? sys_ioctl+0x74/0x74 [] ? sys_ioctl+0x74/0x74 [] vfs_readdir+0x76/0xa8 [] sys_getdents+0x79/0xc9 [] system_call_fastpath+0x16/0x1b Signed-off-by: Aneesh Kumar K.V Cc: Dave Jones Cc: Al Viro Cc: Josh Boyer Cc: Peter Zijlstra Cc: Mimi Zohar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/hugetlbfs/inode.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c index 28cf06e4ec8..001ef01d2fe 100644 --- a/fs/hugetlbfs/inode.c +++ b/fs/hugetlbfs/inode.c @@ -485,6 +485,7 @@ static struct inode *hugetlbfs_get_root(struct super_block *sb, inode->i_fop = &simple_dir_operations; /* directory inodes start off with i_nlink == 2 (for "." entry) */ inc_nlink(inode); + lockdep_annotate_inode_mutex_key(inode); } return inode; } -- cgit v1.2.3-18-g5258 From db7b122cf5f769046d410f82a1e9fe7006ed955a Mon Sep 17 00:00:00 2001 From: Vasiliy Kulikov Date: Wed, 25 Apr 2012 16:01:51 -0700 Subject: arch/arm/mach-ux500/mbox-db5500.c: world-writable sysfs fifo file Don't allow everybody to use a modem. Signed-off-by: Vasiliy Kulikov Cc: Srinidhi Kasagar Acked-by: Linus Walleij Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm/mach-ux500/mbox-db5500.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-ux500/mbox-db5500.c b/arch/arm/mach-ux500/mbox-db5500.c index 2b2d51caf9d..0127490218c 100644 --- a/arch/arm/mach-ux500/mbox-db5500.c +++ b/arch/arm/mach-ux500/mbox-db5500.c @@ -168,7 +168,7 @@ static ssize_t mbox_read_fifo(struct device *dev, return sprintf(buf, "0x%X\n", mbox_value); } -static DEVICE_ATTR(fifo, S_IWUGO | S_IRUGO, mbox_read_fifo, mbox_write_fifo); +static DEVICE_ATTR(fifo, S_IWUSR | S_IRUGO, mbox_read_fifo, mbox_write_fifo); static int mbox_show(struct seq_file *s, void *data) { -- cgit v1.2.3-18-g5258 From 3f5ec5e06d6ca88168277247dbac0ec7b501600f Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Wed, 25 Apr 2012 16:01:51 -0700 Subject: drivers/rtc/rtc-ds1307.c: fix BUG shown with lock debugging enabled Add struct bin_attribute initialization to fix the following bug: rtc-ds1307 3-0068: rtc core: registered ds1307 as rtc0 BUG: key cfb14fcc not in .data! ------------[ cut here ]------------ WARNING: at kernel/lockdep.c:2986 sysfs_add_file_mode+0x84/0xdc() Modules linked in: [] (unwind_backtrace+0x0/0xf8) from [] (warn_slowpath_common+0x4c/0x64) [] (warn_slowpath_common+0x4c/0x64) from [] (warn_slowpath_null+0x1c/0x24) [] (warn_slowpath_null+0x1c/0x24) from [] (sysfs_add_file_mode+0x84/0xdc) [] (sysfs_add_file_mode+0x84/0xdc) from [] (ds1307_probe+0x5e4/0x6ac) [] (ds1307_probe+0x5e4/0x6ac) from [] (i2c_device_probe+0xdc/0x108) [] (i2c_device_probe+0xdc/0x108) from [] (driver_probe_device+0x90/0x210) [] (driver_probe_device+0x90/0x210) from [] (__driver_attach+0x94/0x98) [] (__driver_attach+0x94/0x98) from [] (bus_for_each_dev+0x50/0x7c) [] (bus_for_each_dev+0x50/0x7c) from [] (bus_add_driver+0x184/0x244) [] (bus_add_driver+0x184/0x244) from [] (driver_register+0x78/0x12c) [] (driver_register+0x78/0x12c) from [] (i2c_register_driver+0x2c/0xb4) [] (i2c_register_driver+0x2c/0xb4) from [] (do_one_initcall+0x34/0x178) [] (do_one_initcall+0x34/0x178) from [] (kernel_init+0xdc/0x194) [] (kernel_init+0xdc/0x194) from [] (kernel_thread_exit+0x0/0x8) Since commit 6992f5334995af4 ("sysfs: Use one lockdep class per sysfs attribute") this initialization is required. Reported-by: Stefano Babic Tested-by: Stefano Babic Signed-off-by: Anatolij Gustschin Cc: Alessandro Zummo Cc: Stefano Babic Cc: Eric W. Biederman Cc: Greg Kroah-Hartman Acked-by: Wolfram Sang Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-ds1307.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c index cd188ab72f7..c293d0cdb10 100644 --- a/drivers/rtc/rtc-ds1307.c +++ b/drivers/rtc/rtc-ds1307.c @@ -902,6 +902,7 @@ read_rtc: } ds1307->nvram->attr.name = "nvram"; ds1307->nvram->attr.mode = S_IRUGO | S_IWUSR; + sysfs_bin_attr_init(ds1307->nvram); ds1307->nvram->read = ds1307_nvram_read, ds1307->nvram->write = ds1307_nvram_write, ds1307->nvram->size = chip->nvram_size; -- cgit v1.2.3-18-g5258 From 63f61a6f4633ff34c17bea7a0ed827eaeb0733e1 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 25 Apr 2012 16:01:52 -0700 Subject: revert "proc: clear_refs: do not clear reserved pages" Revert commit 85e72aa5384 ("proc: clear_refs: do not clear reserved pages"), which was a quick fix suitable for -stable until ARM had been moved over to the gate_vma mechanism: https://lkml.org/lkml/2012/1/14/55 With commit f9d4861f ("ARM: 7294/1: vectors: use gate_vma for vectors user mapping"), ARM does now use the gate_vma, so the PageReserved check can be removed from the proc code. Signed-off-by: Will Deacon Cc: Nicolas Pitre Acked-by: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/proc/task_mmu.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index 2b9a7607cbd..2d60492d6df 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -597,9 +597,6 @@ static int clear_refs_pte_range(pmd_t *pmd, unsigned long addr, if (!page) continue; - if (PageReserved(page)) - continue; - /* Clear accessed and referenced bits. */ ptep_test_and_clear_young(vma, addr, pte); ClearPageReferenced(page); -- cgit v1.2.3-18-g5258 From f2a9ef880763d7fbd657a3af646e132a90d70d34 Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Wed, 25 Apr 2012 16:01:52 -0700 Subject: mm: fix NULL ptr dereference in migrate_pages Commit 3268c63 ("mm: fix move/migrate_pages() race on task struct") has added an odd construct where 'mm' is checked for being NULL, and if it is, it would get dereferenced anyways by mput()ing it. This would lead to the following NULL ptr deref and BUG() when calling migrate_pages() with a pid that has no mm struct: [25904.193704] BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 [25904.194235] IP: [] mmput+0x27/0xf0 [25904.194235] PGD 773e6067 PUD 77da0067 PMD 0 [25904.194235] Oops: 0002 [#1] PREEMPT SMP [25904.194235] CPU 2 [25904.194235] Pid: 31608, comm: trinity Tainted: G W 3.4.0-rc2-next-20120412-sasha #69 [25904.194235] RIP: 0010:[] [] mmput+0x27/0xf0 [25904.194235] RSP: 0018:ffff880077d49e08 EFLAGS: 00010202 [25904.194235] RAX: 0000000000000286 RBX: 0000000000000000 RCX: 0000000000000000 [25904.194235] RDX: ffff880075ef8000 RSI: 000000000000023d RDI: 0000000000000286 [25904.194235] RBP: ffff880077d49e18 R08: 0000000000000001 R09: 0000000000000001 [25904.194235] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [25904.194235] R13: 00000000ffffffea R14: ffff880034287740 R15: ffff8800218d3010 [25904.194235] FS: 00007fc8b244c700(0000) GS:ffff880029800000(0000) knlGS:0000000000000000 [25904.194235] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [25904.194235] CR2: 0000000000000050 CR3: 00000000767c6000 CR4: 00000000000406e0 [25904.194235] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [25904.194235] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [25904.194235] Process trinity (pid: 31608, threadinfo ffff880077d48000, task ffff880075ef8000) [25904.194235] Stack: [25904.194235] ffff8800342876c0 0000000000000000 ffff880077d49f78 ffffffff811b8020 [25904.194235] ffffffff811b7d91 ffff880075ef8000 ffff88002256d200 0000000000000000 [25904.194235] 00000000000003ff 0000000000000000 0000000000000000 0000000000000000 [25904.194235] Call Trace: [25904.194235] [] sys_migrate_pages+0x340/0x3a0 [25904.194235] [] ? sys_migrate_pages+0xb1/0x3a0 [25904.194235] [] system_call_fastpath+0x16/0x1b [25904.194235] Code: c9 c3 66 90 55 31 d2 48 89 e5 be 3d 02 00 00 48 83 ec 10 48 89 1c 24 4c 89 64 24 08 48 89 fb 48 c7 c7 cf 0e e1 82 e8 69 18 03 00 ff 4b 50 0f 94 c0 84 c0 0f 84 aa 00 00 00 48 89 df e8 72 f1 [25904.194235] RIP [] mmput+0x27/0xf0 [25904.194235] RSP [25904.194235] CR2: 0000000000000050 [25904.348999] ---[ end trace a307b3ed40206b4b ]--- Signed-off-by: Sasha Levin Cc: Dave Hansen Cc: Mel Gorman Cc: Johannes Weiner Cc: KOSAKI Motohiro Cc: KAMEZAWA Hiroyuki Cc: Hugh Dickins Cc: Christoph Lameter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/mempolicy.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/mm/mempolicy.c b/mm/mempolicy.c index cfb6c867875..b1956913752 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -1361,11 +1361,14 @@ SYSCALL_DEFINE4(migrate_pages, pid_t, pid, unsigned long, maxnode, mm = get_task_mm(task); put_task_struct(task); - if (mm) - err = do_migrate_pages(mm, old, new, - capable(CAP_SYS_NICE) ? MPOL_MF_MOVE_ALL : MPOL_MF_MOVE); - else + + if (!mm) { err = -EINVAL; + goto out; + } + + err = do_migrate_pages(mm, old, new, + capable(CAP_SYS_NICE) ? MPOL_MF_MOVE_ALL : MPOL_MF_MOVE); mmput(mm); out: -- cgit v1.2.3-18-g5258 From 6e8b09eaf268bceac0c62e389b4bc0cb83dfb8e5 Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Wed, 25 Apr 2012 16:01:53 -0700 Subject: mm: fix NULL ptr dereference in move_pages Commit 3268c63 ("mm: fix move/migrate_pages() race on task struct") has added an odd construct where 'mm' is checked for being NULL, and if it is, it would get dereferenced anyways by mput()ing it. Signed-off-by: Sasha Levin Cc: Dave Hansen Cc: Mel Gorman Cc: Johannes Weiner Cc: KOSAKI Motohiro Cc: KAMEZAWA Hiroyuki Cc: Hugh Dickins Acked-by: Christoph Lameter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/migrate.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/mm/migrate.c b/mm/migrate.c index 51c08a0c6f6..11072383ae1 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -1388,14 +1388,14 @@ SYSCALL_DEFINE6(move_pages, pid_t, pid, unsigned long, nr_pages, mm = get_task_mm(task); put_task_struct(task); - if (mm) { - if (nodes) - err = do_pages_move(mm, task_nodes, nr_pages, pages, - nodes, status, flags); - else - err = do_pages_stat(mm, nr_pages, pages, status); - } else - err = -EINVAL; + if (!mm) + return -EINVAL; + + if (nodes) + err = do_pages_move(mm, task_nodes, nr_pages, pages, + nodes, status, flags); + else + err = do_pages_stat(mm, nr_pages, pages, status); mmput(mm); return err; -- cgit v1.2.3-18-g5258 From eb95308ee2a69403909e111837b9068c64cfc349 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 17 Apr 2012 13:38:40 +0200 Subject: sched: Fix more load-balancing fallout Commits 367456c756a6 ("sched: Ditch per cgroup task lists for load-balancing") and 5d6523ebd ("sched: Fix load-balance wreckage") left some more wreckage. By setting loop_max unconditionally to ->nr_running load-balancing could take a lot of time on very long runqueues (hackbench!). So keep the sysctl as max limit of the amount of tasks we'll iterate. Furthermore, the min load filter for migration completely fails with cgroups since inequality in per-cpu state can easily lead to such small loads :/ Furthermore the change to add new tasks to the tail of the queue instead of the head seems to have some effect.. not quite sure I understand why. Combined these fixes solve the huge hackbench regression reported by Tim when hackbench is ran in a cgroup. Reported-by: Tim Chen Acked-by: Tim Chen Signed-off-by: Peter Zijlstra Cc: Linus Torvalds Cc: Andrew Morton Link: http://lkml.kernel.org/r/1335365763.28150.267.camel@twins [ got rid of the CONFIG_PREEMPT tuning and made small readability edits ] Signed-off-by: Ingo Molnar --- kernel/sched/fair.c | 18 ++++++++++-------- kernel/sched/features.h | 1 + 2 files changed, 11 insertions(+), 8 deletions(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index 0d97ebdc58f..e9553640c1c 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -784,7 +784,7 @@ account_entity_enqueue(struct cfs_rq *cfs_rq, struct sched_entity *se) update_load_add(&rq_of(cfs_rq)->load, se->load.weight); #ifdef CONFIG_SMP if (entity_is_task(se)) - list_add_tail(&se->group_node, &rq_of(cfs_rq)->cfs_tasks); + list_add(&se->group_node, &rq_of(cfs_rq)->cfs_tasks); #endif cfs_rq->nr_running++; } @@ -3215,6 +3215,8 @@ static int move_one_task(struct lb_env *env) static unsigned long task_h_load(struct task_struct *p); +static const unsigned int sched_nr_migrate_break = 32; + /* * move_tasks tries to move up to load_move weighted load from busiest to * this_rq, as part of a balancing operation within domain "sd". @@ -3242,7 +3244,7 @@ static int move_tasks(struct lb_env *env) /* take a breather every nr_migrate tasks */ if (env->loop > env->loop_break) { - env->loop_break += sysctl_sched_nr_migrate; + env->loop_break += sched_nr_migrate_break; env->flags |= LBF_NEED_BREAK; break; } @@ -3252,7 +3254,7 @@ static int move_tasks(struct lb_env *env) load = task_h_load(p); - if (load < 16 && !env->sd->nr_balance_failed) + if (sched_feat(LB_MIN) && load < 16 && !env->sd->nr_balance_failed) goto next; if ((load / 2) > env->load_move) @@ -4407,7 +4409,7 @@ static int load_balance(int this_cpu, struct rq *this_rq, .dst_cpu = this_cpu, .dst_rq = this_rq, .idle = idle, - .loop_break = sysctl_sched_nr_migrate, + .loop_break = sched_nr_migrate_break, }; cpumask_copy(cpus, cpu_active_mask); @@ -4445,10 +4447,10 @@ redo: * correctly treated as an imbalance. */ env.flags |= LBF_ALL_PINNED; - env.load_move = imbalance; - env.src_cpu = busiest->cpu; - env.src_rq = busiest; - env.loop_max = busiest->nr_running; + env.load_move = imbalance; + env.src_cpu = busiest->cpu; + env.src_rq = busiest; + env.loop_max = min_t(unsigned long, sysctl_sched_nr_migrate, busiest->nr_running); more_balance: local_irq_save(flags); diff --git a/kernel/sched/features.h b/kernel/sched/features.h index e61fd73913d..de00a486c5c 100644 --- a/kernel/sched/features.h +++ b/kernel/sched/features.h @@ -68,3 +68,4 @@ SCHED_FEAT(TTWU_QUEUE, true) SCHED_FEAT(FORCE_SD_OVERLAP, false) SCHED_FEAT(RT_RUNTIME_SHARE, true) +SCHED_FEAT(LB_MIN, false) -- cgit v1.2.3-18-g5258 From fb2cf2c660971bea0ad86a9a5c19ad39eab61344 Mon Sep 17 00:00:00 2001 From: "he, bo" Date: Wed, 25 Apr 2012 19:59:21 +0800 Subject: sched: Fix OOPS when build_sched_domains() percpu allocation fails Under extreme memory used up situations, percpu allocation might fail. We hit it when system goes to suspend-to-ram, causing a kworker panic: EIP: [] build_sched_domains+0x23a/0xad0 Kernel panic - not syncing: Fatal exception Pid: 3026, comm: kworker/u:3 3.0.8-137473-gf42fbef #1 Call Trace: [] panic+0x66/0x16c [...] [] partition_sched_domains+0x287/0x4b0 [] cpuset_update_active_cpus+0x1fe/0x210 [] cpuset_cpu_inactive+0x1d/0x30 [...] With this fix applied build_sched_domains() will return -ENOMEM and the suspend attempt fails. Signed-off-by: he, bo Reviewed-by: Zhang, Yanmin Reviewed-by: Srivatsa S. Bhat Signed-off-by: Peter Zijlstra Cc: Linus Torvalds Cc: Andrew Morton Cc: Link: http://lkml.kernel.org/r/1335355161.5892.17.camel@hebo [ So, we fail to deallocate a CPU because we cannot allocate RAM :-/ I don't like that kind of sad behavior but nevertheless it should not crash under high memory load. ] Signed-off-by: Ingo Molnar --- kernel/sched/core.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 4603b9d8f30..0533a688ce2 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -6405,16 +6405,26 @@ static void __sdt_free(const struct cpumask *cpu_map) struct sd_data *sdd = &tl->data; for_each_cpu(j, cpu_map) { - struct sched_domain *sd = *per_cpu_ptr(sdd->sd, j); - if (sd && (sd->flags & SD_OVERLAP)) - free_sched_groups(sd->groups, 0); - kfree(*per_cpu_ptr(sdd->sd, j)); - kfree(*per_cpu_ptr(sdd->sg, j)); - kfree(*per_cpu_ptr(sdd->sgp, j)); + struct sched_domain *sd; + + if (sdd->sd) { + sd = *per_cpu_ptr(sdd->sd, j); + if (sd && (sd->flags & SD_OVERLAP)) + free_sched_groups(sd->groups, 0); + kfree(*per_cpu_ptr(sdd->sd, j)); + } + + if (sdd->sg) + kfree(*per_cpu_ptr(sdd->sg, j)); + if (sdd->sgp) + kfree(*per_cpu_ptr(sdd->sgp, j)); } free_percpu(sdd->sd); + sdd->sd = NULL; free_percpu(sdd->sg); + sdd->sg = NULL; free_percpu(sdd->sgp); + sdd->sgp = NULL; } } -- cgit v1.2.3-18-g5258 From 724b6daa13e100067c30cfc4d1ad06629609dc4e Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 11 Apr 2012 11:54:13 +1000 Subject: perf: Fix perf_event_for_each() to use sibling In perf_event_for_each() we call a function on an event, and then iterate over the siblings of the event. However we don't call the function on the siblings, we call it repeatedly on the original event - it seems "obvious" that we should be calling it with sibling as the argument. It looks like this broke in commit 75f937f24bd9 ("Fix ctx->mutex vs counter->mutex inversion"). The only effect of the bug is that the PERF_IOC_FLAG_GROUP parameter to the ioctls doesn't work. Signed-off-by: Michael Ellerman Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1334109253-31329-1-git-send-email-michael@ellerman.id.au Signed-off-by: Ingo Molnar --- kernel/events/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/events/core.c b/kernel/events/core.c index a6a9ec4cd8f..fd126f82b57 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -3183,7 +3183,7 @@ static void perf_event_for_each(struct perf_event *event, perf_event_for_each_child(event, func); func(event); list_for_each_entry(sibling, &event->sibling_list, group_entry) - perf_event_for_each_child(event, func); + perf_event_for_each_child(sibling, func); mutex_unlock(&ctx->mutex); } -- cgit v1.2.3-18-g5258 From d08c9a33b4aa6665b0ee3c4d1b57715fa0eae2a2 Mon Sep 17 00:00:00 2001 From: "Mingarelli, Thomas" Date: Tue, 3 Apr 2012 05:37:01 +0000 Subject: hpwdt: Only BYTE reads/writes to WD Timer port 0x72 This patch is to correct the use of the iLO port 0x72 usage. The port 0x72 is a byte size write/read and hpwdt is currently writing a WORD. Signed-off by: Thomas Mingarelli Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/hpwdt.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index cbc7ceef278..9f13b897fd6 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -435,16 +435,16 @@ static void hpwdt_start(void) { reload = SECS_TO_TICKS(soft_margin); iowrite16(reload, hpwdt_timer_reg); - iowrite16(0x85, hpwdt_timer_con); + iowrite8(0x85, hpwdt_timer_con); } static void hpwdt_stop(void) { unsigned long data; - data = ioread16(hpwdt_timer_con); + data = ioread8(hpwdt_timer_con); data &= 0xFE; - iowrite16(data, hpwdt_timer_con); + iowrite8(data, hpwdt_timer_con); } static void hpwdt_ping(void) -- cgit v1.2.3-18-g5258 From c3e40a9972428d6e2d8e287ed0233a57a218c30f Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 25 Apr 2012 13:44:20 -0700 Subject: hwmon: (fam15h_power) Fix pci_device_id array pci_match_id() takes an *array* of IDs which must be properly zero- terminated. Reported-by: Ben Hutchings Cc: stable@vger.kernel.org # 3.0+: 00250ec hwmon: fam15h_power: fix bogus values Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Guenter Roeck Acked-by: Jean Delvare --- drivers/hwmon/fam15h_power.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c index 37a8fc92b44..e8e18cab1fb 100644 --- a/drivers/hwmon/fam15h_power.c +++ b/drivers/hwmon/fam15h_power.c @@ -128,17 +128,20 @@ static bool __devinit fam15h_power_is_internal_node0(struct pci_dev *f4) * counter saturations resulting in bogus power readings. * We correct this value ourselves to cope with older BIOSes. */ +static DEFINE_PCI_DEVICE_TABLE(affected_device) = { + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) }, + { 0 } +}; + static void __devinit tweak_runavg_range(struct pci_dev *pdev) { u32 val; - const struct pci_device_id affected_device = { - PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) }; /* * let this quirk apply only to the current version of the * northbridge, since future versions may change the behavior */ - if (!pci_match_id(&affected_device, pdev)) + if (!pci_match_id(affected_device, pdev)) return; pci_bus_read_config_dword(pdev->bus, -- cgit v1.2.3-18-g5258 From 6651819b4b4fc3caa6964c5d825eb4bb996f3905 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sun, 1 Apr 2012 19:16:18 +0200 Subject: drm/i915: handle input/output sdvo timings separately in mode_set We seem to have a decent confusion between the output timings and the input timings of the sdvo encoder. If I understand the code correctly, we use the original mode unchanged for the output timings, safe for the lvds case. And we should use the adjusted mode for input timings. Clarify the situation by adding an explicit output_dtd to the sdvo mode_set function and streamline the code-flow by moving the input and output mode setting in the sdvo encode together. Furthermore testing showed that the sdvo input timing needs the unadjusted dotclock, the sdvo chip will automatically compute the required pixel multiplier to get a dotclock above 100 MHz. Fix this up when converting a drm mode to an sdvo dtd. This regression was introduced in commit c74696b9c890074c1e1ee3d7496fc71eb3680ced Author: Pavel Roskin Date: Thu Sep 2 14:46:34 2010 -0400 i915: revert some checks added by commit 32aad86f particularly the following hunk: diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 093e914..62d22ae 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -1122,11 +1123,9 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder, /* We have tried to get input timing in mode_fixup, and filled into adjusted_mode */ - if (intel_sdvo->is_tv || intel_sdvo->is_lvds) { - intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode); + intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode); + if (intel_sdvo->is_tv || intel_sdvo->is_lvds) input_dtd.part2.sdvo_flags = intel_sdvo->sdvo_flags; - } else - intel_sdvo_get_dtd_from_mode(&input_dtd, mode); /* If it's a TV, we already set the output timing in mode_fixup. * Otherwise, the output timing is equal to the input timing. Due to questions raised in review, below a more elaborate analysis of the bug at hand: Sdvo seems to have two timings, one is the output timing which will be sent over whatever is connected on the other side of the sdvo chip (panel, hdmi screen, tv), the other is the input timing which will be generated by the gmch pipe. It looks like sdvo is expected to scale between the two. To make things slightly more complicated, we have a bunch of special cases: - For lvds panel we always use a fixed output timing, namely intel_sdvo->sdvo_lvds_fixed_mode, hence that special case. - Sdvo has an interface to generate a preferred input timing for a given output timing. This is the confusing thing that I've tried to clear up with the follow-on patches. - A special requirement is that the input pixel clock needs to be between 100MHz and 200MHz (likely to keep it within the electromechanical design range of PCIe), 270MHz on later gen4+. Lower pixel clocks are doubled/quadrupled. The thing this patch tries to fix is that the pipe needs to be explicitly instructed to double/quadruple the pixels and needs the correspondingly higher pixel clock, whereas the sdvo adaptor seems to do that itself and needs the unadjusted pixel clock. For the sdvo encode side we already set the pixel mutliplier with a different command (0x21). This patch tries to fix this mess by: - Keeping the output mode timing in the unadjusted plain mode, safe for the lvds case. - Storing the input timing in the adjusted_mode with the adjusted pixel clock. This way we don't need to frob around with the core crtc mode set code. - Fixing up the pixelclock when constructing the sdvo dtd timing struct. This is why the first hunk of the patch is an integral part of the series. - Dropping the is_tv special case because input_dtd is equivalent to adjusted_mode after these changes. Follow-up patches clear this up further (by simply ripping out intel_sdvo->input_dtd because it's not needed). v2: Extend commit message with an in-depth bug analysis. Reported-and-Tested-by: Bernard Blackham Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=48157 Reviewed-by: Jesse Barnes Cc: stable@kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_sdvo.c | 34 ++++++++++++++++++---------------- 1 file changed, 18 insertions(+), 16 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index e36b171c1e7..232d77d07d8 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -731,6 +731,7 @@ static void intel_sdvo_get_dtd_from_mode(struct intel_sdvo_dtd *dtd, uint16_t width, height; uint16_t h_blank_len, h_sync_len, v_blank_len, v_sync_len; uint16_t h_sync_offset, v_sync_offset; + int mode_clock; width = mode->crtc_hdisplay; height = mode->crtc_vdisplay; @@ -745,7 +746,11 @@ static void intel_sdvo_get_dtd_from_mode(struct intel_sdvo_dtd *dtd, h_sync_offset = mode->crtc_hsync_start - mode->crtc_hblank_start; v_sync_offset = mode->crtc_vsync_start - mode->crtc_vblank_start; - dtd->part1.clock = mode->clock / 10; + mode_clock = mode->clock; + mode_clock /= intel_mode_get_pixel_multiplier(mode) ?: 1; + mode_clock /= 10; + dtd->part1.clock = mode_clock; + dtd->part1.h_active = width & 0xff; dtd->part1.h_blank = h_blank_len & 0xff; dtd->part1.h_high = (((width >> 8) & 0xf) << 4) | @@ -996,7 +1001,7 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder, struct intel_sdvo *intel_sdvo = to_intel_sdvo(encoder); u32 sdvox; struct intel_sdvo_in_out_map in_out; - struct intel_sdvo_dtd input_dtd; + struct intel_sdvo_dtd input_dtd, output_dtd; int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode); int rate; @@ -1021,20 +1026,13 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder, intel_sdvo->attached_output)) return; - /* We have tried to get input timing in mode_fixup, and filled into - * adjusted_mode. - */ - if (intel_sdvo->is_tv || intel_sdvo->is_lvds) { - input_dtd = intel_sdvo->input_dtd; - } else { - /* Set the output timing to the screen */ - if (!intel_sdvo_set_target_output(intel_sdvo, - intel_sdvo->attached_output)) - return; - - intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode); - (void) intel_sdvo_set_output_timing(intel_sdvo, &input_dtd); - } + /* lvds has a special fixed output timing. */ + if (intel_sdvo->is_lvds) + intel_sdvo_get_dtd_from_mode(&output_dtd, + intel_sdvo->sdvo_lvds_fixed_mode); + else + intel_sdvo_get_dtd_from_mode(&output_dtd, mode); + (void) intel_sdvo_set_output_timing(intel_sdvo, &output_dtd); /* Set the input timing to the screen. Assume always input 0. */ if (!intel_sdvo_set_target_input(intel_sdvo)) @@ -1052,6 +1050,10 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder, !intel_sdvo_set_tv_format(intel_sdvo)) return; + /* We have tried to get input timing in mode_fixup, and filled into + * adjusted_mode. + */ + intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode); (void) intel_sdvo_set_input_timing(intel_sdvo, &input_dtd); switch (pixel_multiplier) { -- cgit v1.2.3-18-g5258 From cd0a2bfb77a3edeecd652081e0b1a163d3b0696b Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Wed, 18 Apr 2012 17:17:19 -0400 Subject: pci: frv architecture needs generic setup-bus infrastructure Otherwise we get this link failure for frv's defconfig: LD .tmp_vmlinux1 drivers/built-in.o: In function `pci_assign_resource': (.text+0xbf0c): undefined reference to `pci_cardbus_resource_alignment' drivers/built-in.o: In function `pci_setup': pci.c:(.init.text+0x174): undefined reference to `pci_realloc_get_opt' pci.c:(.init.text+0x1a0): undefined reference to `pci_realloc_get_opt' make[1]: *** [.tmp_vmlinux1] Error 1 Cc: David Howells Acked-by: Bjorn Helgaas Signed-off-by: Paul Gortmaker --- drivers/pci/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 083a49fee56..165274c064b 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -42,6 +42,7 @@ obj-$(CONFIG_UNICORE32) += setup-bus.o setup-irq.o obj-$(CONFIG_PARISC) += setup-bus.o obj-$(CONFIG_SUPERH) += setup-bus.o setup-irq.o obj-$(CONFIG_PPC) += setup-bus.o +obj-$(CONFIG_FRV) += setup-bus.o obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o obj-$(CONFIG_X86_VISWS) += setup-irq.o obj-$(CONFIG_MN10300) += setup-bus.o -- cgit v1.2.3-18-g5258 From bc856a62c8036330cb2d95e24756285c6d8ecba2 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Wed, 18 Apr 2012 22:32:24 -0400 Subject: blackfin: fix compile error in bfin-lq035q1-fb.c This file has an implicit dependency on GPIO stuff, showing up as the following build failure: drivers/video/bfin-lq035q1-fb.c:369:6: error: 'GPIOF_OUT_INIT_LOW' undeclared Other more global bfin build issues prevent an automated bisect, but it really doesn't matter - simply add in the appropriate header. Cc: Florian Tobias Schandinat Acked-by: Mike Frysinger Signed-off-by: Paul Gortmaker --- drivers/video/bfin-lq035q1-fb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/video/bfin-lq035q1-fb.c b/drivers/video/bfin-lq035q1-fb.c index 86922ac8441..353c02fe8a9 100644 --- a/drivers/video/bfin-lq035q1-fb.c +++ b/drivers/video/bfin-lq035q1-fb.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3-18-g5258 From fa83af7e8f2936732459a2399df87a0b648b454d Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Wed, 18 Apr 2012 23:31:28 -0400 Subject: blackfin: fix ifdef fustercluck in mach-bf538/boards/ezkit.c This file has lots and lots of ifdef, around structure decls and structure usages. The failure issue was that we would build the BF538-EZKIT_defconfig and get: arch/blackfin/mach-bf538/boards/ezkit.c:924:3: error: 'bfin_lq035q1_device' undeclared here (not in a function) even though the same ifdef _appeared_ to enable both the struct declaration and the code that used it. Yet cpp was telling us we didn't have the struct, but we still had the usage of it. However, _appeared_ is the operative word. After marking all the anonymous #endif with their parent #ifdef config options, it was _then_ clear that there was a misplaced #endif that was hiding the struct declaration. The real guts of the patch boils down to this: -#endif +#endif /* CONFIG_MTD_M25P80 */ +#endif /* CONFIG_SPI_BFIN5XX */ [...] -#endif /* spi master and devices */ but since I had to tag the #endif with their respective #ifdef options to find this misplaced SPI endif, it would be silly to then go and delete them all. So they stay. Cc: Sonic Zhang Cc: Bob Liu Acked-by: Mike Frysinger Signed-off-by: Paul Gortmaker --- arch/blackfin/mach-bf538/boards/ezkit.c | 53 ++++++++++++++++----------------- 1 file changed, 26 insertions(+), 27 deletions(-) diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c index 1633a6f306c..85038f54354 100644 --- a/arch/blackfin/mach-bf538/boards/ezkit.c +++ b/arch/blackfin/mach-bf538/boards/ezkit.c @@ -38,7 +38,7 @@ static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; -#endif +#endif /* CONFIG_RTC_DRV_BFIN */ #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #ifdef CONFIG_SERIAL_BFIN_UART0 @@ -100,7 +100,7 @@ static struct platform_device bfin_uart0_device = { .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ }, }; -#endif +#endif /* CONFIG_SERIAL_BFIN_UART0 */ #ifdef CONFIG_SERIAL_BFIN_UART1 static struct resource bfin_uart1_resources[] = { { @@ -148,7 +148,7 @@ static struct platform_device bfin_uart1_device = { .platform_data = &bfin_uart1_peripherals, /* Passed to driver */ }, }; -#endif +#endif /* CONFIG_SERIAL_BFIN_UART1 */ #ifdef CONFIG_SERIAL_BFIN_UART2 static struct resource bfin_uart2_resources[] = { { @@ -196,8 +196,8 @@ static struct platform_device bfin_uart2_device = { .platform_data = &bfin_uart2_peripherals, /* Passed to driver */ }, }; -#endif -#endif +#endif /* CONFIG_SERIAL_BFIN_UART2 */ +#endif /* CONFIG_SERIAL_BFIN */ #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #ifdef CONFIG_BFIN_SIR0 @@ -224,7 +224,7 @@ static struct platform_device bfin_sir0_device = { .num_resources = ARRAY_SIZE(bfin_sir0_resources), .resource = bfin_sir0_resources, }; -#endif +#endif /* CONFIG_BFIN_SIR0 */ #ifdef CONFIG_BFIN_SIR1 static struct resource bfin_sir1_resources[] = { { @@ -249,7 +249,7 @@ static struct platform_device bfin_sir1_device = { .num_resources = ARRAY_SIZE(bfin_sir1_resources), .resource = bfin_sir1_resources, }; -#endif +#endif /* CONFIG_BFIN_SIR1 */ #ifdef CONFIG_BFIN_SIR2 static struct resource bfin_sir2_resources[] = { { @@ -274,8 +274,8 @@ static struct platform_device bfin_sir2_device = { .num_resources = ARRAY_SIZE(bfin_sir2_resources), .resource = bfin_sir2_resources, }; -#endif -#endif +#endif /* CONFIG_BFIN_SIR2 */ +#endif /* CONFIG_BFIN_SIR */ #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART @@ -311,7 +311,7 @@ static struct platform_device bfin_sport0_uart_device = { .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ }, }; -#endif +#endif /* CONFIG_SERIAL_BFIN_SPORT0_UART */ #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART static struct resource bfin_sport1_uart_resources[] = { { @@ -345,7 +345,7 @@ static struct platform_device bfin_sport1_uart_device = { .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ }, }; -#endif +#endif /* CONFIG_SERIAL_BFIN_SPORT1_UART */ #ifdef CONFIG_SERIAL_BFIN_SPORT2_UART static struct resource bfin_sport2_uart_resources[] = { { @@ -379,7 +379,7 @@ static struct platform_device bfin_sport2_uart_device = { .platform_data = &bfin_sport2_peripherals, /* Passed to driver */ }, }; -#endif +#endif /* CONFIG_SERIAL_BFIN_SPORT2_UART */ #ifdef CONFIG_SERIAL_BFIN_SPORT3_UART static struct resource bfin_sport3_uart_resources[] = { { @@ -413,8 +413,8 @@ static struct platform_device bfin_sport3_uart_device = { .platform_data = &bfin_sport3_peripherals, /* Passed to driver */ }, }; -#endif -#endif +#endif /* CONFIG_SERIAL_BFIN_SPORT3_UART */ +#endif /* CONFIG_SERIAL_BFIN_SPORT */ #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) static unsigned short bfin_can_peripherals[] = { @@ -452,7 +452,7 @@ static struct platform_device bfin_can_device = { .platform_data = &bfin_can_peripherals, /* Passed to driver */ }, }; -#endif +#endif /* CONFIG_CAN_BFIN */ /* * USB-LAN EzExtender board @@ -488,7 +488,7 @@ static struct platform_device smc91x_device = { .platform_data = &smc91x_info, }, }; -#endif +#endif /* CONFIG_SMC91X */ #if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) /* all SPI peripherals info goes here */ @@ -518,7 +518,8 @@ static struct flash_platform_data bfin_spi_flash_data = { static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ }; -#endif +#endif /* CONFIG_MTD_M25P80 */ +#endif /* CONFIG_SPI_BFIN5XX */ #if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE) #include @@ -535,7 +536,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { .gpio_export = 1, /* Export GPIO to gpiolib */ .gpio_base = -1, /* Dynamic allocation */ }; -#endif +#endif /* CONFIG_TOUCHSCREEN_AD7879 */ #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) #include @@ -564,7 +565,7 @@ static struct platform_device bfin_lq035q1_device = { .platform_data = &bfin_lq035q1_data, }, }; -#endif +#endif /* CONFIG_FB_BFIN_LQ035Q1 */ static struct spi_board_info bf538_spi_board_info[] __initdata = { #if defined(CONFIG_MTD_M25P80) \ @@ -579,7 +580,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = { .controller_data = &spi_flash_chip_info, .mode = SPI_MODE_3, }, -#endif +#endif /* CONFIG_MTD_M25P80 */ #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) { .modalias = "ad7879", @@ -590,7 +591,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = { .chip_select = 1, .mode = SPI_CPHA | SPI_CPOL, }, -#endif +#endif /* CONFIG_TOUCHSCREEN_AD7879_SPI */ #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) { .modalias = "bfin-lq035q1-spi", @@ -599,7 +600,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = { .chip_select = 2, .mode = SPI_CPHA | SPI_CPOL, }, -#endif +#endif /* CONFIG_FB_BFIN_LQ035Q1 */ #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) { .modalias = "spidev", @@ -607,7 +608,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = { .bus_num = 0, .chip_select = 1, }, -#endif +#endif /* CONFIG_SPI_SPIDEV */ }; /* SPI (0) */ @@ -716,8 +717,6 @@ static struct platform_device bf538_spi_master2 = { }, }; -#endif /* spi master and devices */ - #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) static struct resource bfin_twi0_resource[] = { [0] = { @@ -759,8 +758,8 @@ static struct platform_device i2c_bfin_twi1_device = { .num_resources = ARRAY_SIZE(bfin_twi1_resource), .resource = bfin_twi1_resource, }; -#endif -#endif +#endif /* CONFIG_BF542 */ +#endif /* CONFIG_I2C_BLACKFIN_TWI */ #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include -- cgit v1.2.3-18-g5258 From 89f21cc050d5eed8eeffee5b46297fb7a74ef9dd Mon Sep 17 00:00:00 2001 From: Rupesh Gujare Date: Wed, 25 Apr 2012 23:54:58 +0100 Subject: staging: ozwpan: Fix bug where kfree is called twice. Signed-off-by: Rupesh Gujare Signed-off-by: Chris Kelly Signed-off-by: Greg Kroah-Hartman --- drivers/staging/ozwpan/ozpd.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/staging/ozwpan/ozpd.c b/drivers/staging/ozwpan/ozpd.c index 2b45d3d1800..04cd57f2a6d 100644 --- a/drivers/staging/ozwpan/ozpd.c +++ b/drivers/staging/ozwpan/ozpd.c @@ -383,8 +383,6 @@ static void oz_tx_frame_free(struct oz_pd *pd, struct oz_tx_frame *f) pd->tx_pool = &f->link; pd->tx_pool_count++; f = 0; - } else { - kfree(f); } spin_unlock_bh(&pd->tx_frame_lock); if (f) -- cgit v1.2.3-18-g5258 From df88b2d96e36d9a9e325bfcd12eb45671cbbc937 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Thu, 26 Apr 2012 13:13:21 -0400 Subject: xen/enlighten: Disable MWAIT_LEAF so that acpi-pad won't be loaded. There are exactly four users of __monitor and __mwait: - cstate.c (which allows acpi_processor_ffh_cstate_enter to be called when the cpuidle API drivers are used. However patch "cpuidle: replace xen access to x86 pm_idle and default_idle" provides a mechanism to disable the cpuidle and use safe_halt. - smpboot (which allows mwait_play_dead to be called). However safe_halt is always used so we skip that. - intel_idle (same deal as above). - acpi_pad.c. This the one that we do not want to run as we will hit the below crash. Why do we want to expose MWAIT_LEAF in the first place? We want it for the xen-acpi-processor driver - which uploads C-states to the hypervisor. If MWAIT_LEAF is set, the cstate.c sets the proper address in the C-states so that the hypervisor can benefit from using the MWAIT functionality. And that is the sole reason for using it. Without this patch, if a module performs mwait or monitor we get this: invalid opcode: 0000 [#1] SMP CPU 2 .. snip.. Pid: 5036, comm: insmod Tainted: G O 3.4.0-rc2upstream-dirty #2 Intel Corporation S2600CP/S2600CP RIP: e030:[] [] mwait_check_init+0x17/0x1000 [mwait_check] RSP: e02b:ffff8801c298bf18 EFLAGS: 00010282 RAX: ffff8801c298a010 RBX: ffffffffa03b2000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff8801c29800d8 RDI: ffff8801ff097200 RBP: ffff8801c298bf18 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: ffffffffa000a000 R14: 0000005148db7294 R15: 0000000000000003 FS: 00007fbb364f2700(0000) GS:ffff8801ff08c000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000000179f038 CR3: 00000001c9469000 CR4: 0000000000002660 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process insmod (pid: 5036, threadinfo ffff8801c298a000, task ffff8801c29cd7e0) Stack: ffff8801c298bf48 ffffffff81002124 ffffffffa03b2000 00000000000081fd 000000000178f010 000000000178f030 ffff8801c298bf78 ffffffff810c41e6 00007fff3fb30db9 00007fff3fb30db9 00000000000081fd 0000000000010000 Call Trace: [] do_one_initcall+0x124/0x170 [] sys_init_module+0xc6/0x220 [] system_call_fastpath+0x16/0x1b Code: <0f> 01 c8 31 c0 0f 01 c9 c9 c3 00 00 00 00 00 00 00 00 00 00 00 00 RIP [] mwait_check_init+0x17/0x1000 [mwait_check] RSP ---[ end trace 16582fc8a3d1e29a ]--- Kernel panic - not syncing: Fatal exception With this module (which is what acpi_pad.c would hit): MODULE_AUTHOR("Konrad Rzeszutek Wilk "); MODULE_DESCRIPTION("mwait_check_and_back"); MODULE_LICENSE("GPL"); MODULE_VERSION(); static int __init mwait_check_init(void) { __monitor((void *)¤t_thread_info()->flags, 0, 0); __mwait(0, 0); return 0; } static void __exit mwait_check_exit(void) { } module_init(mwait_check_init); module_exit(mwait_check_exit); Reported-by: Liu, Jinsong Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/enlighten.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 4f51bebac02..a8f8844b8d3 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -261,7 +261,8 @@ static void xen_cpuid(unsigned int *ax, unsigned int *bx, static bool __init xen_check_mwait(void) { -#ifdef CONFIG_ACPI +#if defined(CONFIG_ACPI) && !defined(CONFIG_ACPI_PROCESSOR_AGGREGATOR) && \ + !defined(CONFIG_ACPI_PROCESSOR_AGGREGATOR_MODULE) struct xen_platform_op op = { .cmd = XENPF_set_processor_pminfo, .u.set_pminfo.id = -1, @@ -349,7 +350,6 @@ static void __init xen_init_cpuid_mask(void) /* Xen will set CR4.OSXSAVE if supported and not disabled by force */ if ((cx & xsave_mask) != xsave_mask) cpuid_leaf1_ecx_mask &= ~xsave_mask; /* disable XSAVE & OSXSAVE */ - if (xen_check_mwait()) cpuid_leaf1_ecx_set_mask = (1 << (X86_FEATURE_MWAIT % 32)); } -- cgit v1.2.3-18-g5258 From 521394e4e679996955bc351cb6b64639751db2ff Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Wed, 25 Apr 2012 16:11:38 +0100 Subject: xen: use the pirq number to check the pirq_eoi_map In pirq_check_eoi_map use the pirq number rather than the Linux irq number to check whether an eoi is needed in the pirq_eoi_map. The reason is that the irq number is not always identical to the pirq number so if we wrongly use the irq number to check the pirq_eoi_map we are going to check for the wrong pirq to EOI. As a consequence some interrupts might not be EOI'ed by the guest correctly. Signed-off-by: Stefano Stabellini Tested-by: Tobias Geiger [v1: Added some extra wording to git commit] Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/events.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/xen/events.c b/drivers/xen/events.c index 4b33acd8ed4..0a8a17cd80b 100644 --- a/drivers/xen/events.c +++ b/drivers/xen/events.c @@ -274,7 +274,7 @@ static unsigned int cpu_from_evtchn(unsigned int evtchn) static bool pirq_check_eoi_map(unsigned irq) { - return test_bit(irq, pirq_eoi_map); + return test_bit(pirq_from_irq(irq), pirq_eoi_map); } static bool pirq_needs_eoi_flag(unsigned irq) -- cgit v1.2.3-18-g5258 From 8e12a038f88e819c878e5697ff681cb08bcebb08 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Thu, 26 Apr 2012 14:23:22 -0400 Subject: xtensa: fix build fail on undefined ack_bad_irq Commit e520c410854bab763be24e0fce7ba89dc252efee "xtensa: convert to asm-generic/hardirq.h" converted over to using the asm-generic parts, but it also added the sentinel #define ack_bad_irq ack_bad_irq which tells asm-generic to _not_ use the common ack_bad_irq. Since e520c41 deleted the duplicated code from the arch specific file, we _do_ want the asm-generic one in scope. So delete the trigger define above which hides it. In doing so we'll realize that we've got to delete the almost-duplicate prototype as well to avoid "static declaration ... follows non-static". Cc: Christoph Hellwig Cc: Chris Zankel Signed-off-by: Paul Gortmaker --- arch/xtensa/include/asm/hardirq.h | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/xtensa/include/asm/hardirq.h b/arch/xtensa/include/asm/hardirq.h index 26664cef8f1..91695a13549 100644 --- a/arch/xtensa/include/asm/hardirq.h +++ b/arch/xtensa/include/asm/hardirq.h @@ -11,9 +11,6 @@ #ifndef _XTENSA_HARDIRQ_H #define _XTENSA_HARDIRQ_H -void ack_bad_irq(unsigned int irq); -#define ack_bad_irq ack_bad_irq - #include #endif /* _XTENSA_HARDIRQ_H */ -- cgit v1.2.3-18-g5258 From 5c22837adca7c30b66121cf18ad3e160134268d4 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 26 Apr 2012 21:59:10 +0200 Subject: USB: cdc-wdm: fix race leading leading to memory corruption MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch fixes a race whereby a pointer to a buffer would be overwritten while the buffer was in use leading to a double free and a memory leak. This causes crashes. This bug was introduced in 2.6.34 Signed-off-by: Oliver Neukum Tested-by: Bjørn Mork Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-wdm.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index c6f6560d436..0bb2b3248da 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -157,8 +157,9 @@ static void wdm_out_callback(struct urb *urb) spin_lock(&desc->iuspin); desc->werr = urb->status; spin_unlock(&desc->iuspin); - clear_bit(WDM_IN_USE, &desc->flags); kfree(desc->outbuf); + desc->outbuf = NULL; + clear_bit(WDM_IN_USE, &desc->flags); wake_up(&desc->wait); } @@ -338,7 +339,7 @@ static ssize_t wdm_write if (we < 0) return -EIO; - desc->outbuf = buf = kmalloc(count, GFP_KERNEL); + buf = kmalloc(count, GFP_KERNEL); if (!buf) { rv = -ENOMEM; goto outnl; @@ -406,10 +407,12 @@ static ssize_t wdm_write req->wIndex = desc->inum; req->wLength = cpu_to_le16(count); set_bit(WDM_IN_USE, &desc->flags); + desc->outbuf = buf; rv = usb_submit_urb(desc->command, GFP_KERNEL); if (rv < 0) { kfree(buf); + desc->outbuf = NULL; clear_bit(WDM_IN_USE, &desc->flags); dev_err(&desc->intf->dev, "Tx URB error: %d\n", rv); } else { -- cgit v1.2.3-18-g5258 From ec2ccd884ab1e190bc5ddb210c7d5f5ea2ddeba3 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Fri, 27 Apr 2012 11:12:38 +0930 Subject: sh: Fix up tracepoint build fallout from static key introduction. With the introduction of static keys, anything using tracepoints blows up in the following manner: include/trace/events/oom.h:8:13: error: initializer element is not constant include/trace/events/oom.h:8:13: error: (near initialization for '__tracepoint_oom_score_adj_update') include/trace/events/oom.h:8:13: error: initializer element is not constant include/trace/events/oom.h:8:13: error: (near initialization for '__tracepoint_oom_score_adj_update.key') This is a result of the STATIC_KEY_INIT_xxx defs wrapping ATOMIC_INIT() which on sh includes an atomic_t typecast. Given that we don't really need the typecast for anything anymore, the simplest solution is simply to kill off the cast. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- arch/sh/include/asm/atomic.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/include/asm/atomic.h b/arch/sh/include/asm/atomic.h index 37f2f4a5523..f4c1c20bcdf 100644 --- a/arch/sh/include/asm/atomic.h +++ b/arch/sh/include/asm/atomic.h @@ -11,7 +11,7 @@ #include #include -#define ATOMIC_INIT(i) ( (atomic_t) { (i) } ) +#define ATOMIC_INIT(i) { (i) } #define atomic_read(v) (*(volatile int *)&(v)->counter) #define atomic_set(v,i) ((v)->counter = (i)) -- cgit v1.2.3-18-g5258 From cf405ae612b0f7e2358db7ff594c0e94846137aa Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Thu, 26 Apr 2012 13:50:03 -0400 Subject: xen/smp: Fix crash when booting with ACPI hotplug CPUs. When we boot on a machine that can hotplug CPUs and we are using 'dom0_max_vcpus=X' on the Xen hypervisor line to clip the amount of CPUs available to the initial domain, we get this: (XEN) Command line: com1=115200,8n1 dom0_mem=8G noreboot dom0_max_vcpus=8 sync_console mce_verbosity=verbose console=com1,vga loglvl=all guest_loglvl=all .. snip.. DMI: Intel Corporation S2600CP/S2600CP, BIOS SE5C600.86B.99.99.x032.072520111118 07/25/2011 .. snip. SMP: Allowing 64 CPUs, 32 hotplug CPUs installing Xen timer for CPU 7 cpu 7 spinlock event irq 361 NMI watchdog: disabled (cpu7): hardware events not enabled Brought up 8 CPUs .. snip.. [acpi processor finds the CPUs are not initialized and starts calling arch_register_cpu, which creates /sys/devices/system/cpu/cpu8/online] CPU 8 got hotplugged CPU 9 got hotplugged CPU 10 got hotplugged .. snip.. initcall 1_acpi_battery_init_async+0x0/0x1b returned 0 after 406 usecs calling erst_init+0x0/0x2bb @ 1 [and the scheduler sticks newly started tasks on the new CPUs, but said CPUs cannot be initialized b/c the hypervisor has limited the amount of vCPUS to 8 - as per the dom0_max_vcpus=8 flag. The spinlock tries to kick the other CPU, but the structure for that is not initialized and we crash.] BUG: unable to handle kernel paging request at fffffffffffffed8 IP: [] xen_spin_lock+0x29/0x60 PGD 180d067 PUD 180e067 PMD 0 Oops: 0002 [#1] SMP CPU 7 Modules linked in: Pid: 1, comm: swapper/0 Not tainted 3.4.0-rc2upstream-00001-gf5154e8 #1 Intel Corporation S2600CP/S2600CP RIP: e030:[] [] xen_spin_lock+0x29/0x60 RSP: e02b:ffff8801fb9b3a70 EFLAGS: 00010282 With this patch, we cap the amount of vCPUS that the initial domain can run, to exactly what dom0_max_vcpus=X has specified. In the future, if there is a hypercall that will allow a running domain to expand past its initial set of vCPUS, this patch should be re-evaluated. CC: stable@kernel.org Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/smp.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index 5fac6919b95..0503c0c493a 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -178,6 +178,7 @@ static void __init xen_fill_possible_map(void) static void __init xen_filter_cpu_maps(void) { int i, rc; + unsigned int subtract = 0; if (!xen_initial_domain()) return; @@ -192,8 +193,22 @@ static void __init xen_filter_cpu_maps(void) } else { set_cpu_possible(i, false); set_cpu_present(i, false); + subtract++; } } +#ifdef CONFIG_HOTPLUG_CPU + /* This is akin to using 'nr_cpus' on the Linux command line. + * Which is OK as when we use 'dom0_max_vcpus=X' we can only + * have up to X, while nr_cpu_ids is greater than X. This + * normally is not a problem, except when CPU hotplugging + * is involved and then there might be more than X CPUs + * in the guest - which will not work as there is no + * hypercall to expand the max number of VCPUs an already + * running guest has. So cap it up to X. */ + if (subtract) + nr_cpu_ids = nr_cpu_ids - subtract; +#endif + } static void __init xen_smp_prepare_boot_cpu(void) -- cgit v1.2.3-18-g5258 From b930fe5e1f5646e071facda70b25b137ebeae5af Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Thu, 26 Apr 2012 14:22:33 -0400 Subject: xen/acpi: Workaround broken BIOSes exporting non-existing C-states. We did a similar check for the P-states but did not do it for the C-states. What we want to do is ignore cases where the DSDT has definition for sixteen CPUs, but the machine only has eight CPUs and we get: xen-acpi-processor: (CX): Hypervisor error (-22) for ACPI CPU14 Reported-by: Tobias Geiger Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/xen-acpi-processor.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/xen/xen-acpi-processor.c b/drivers/xen/xen-acpi-processor.c index 174b5653cd8..0b48579a9cd 100644 --- a/drivers/xen/xen-acpi-processor.c +++ b/drivers/xen/xen-acpi-processor.c @@ -128,7 +128,10 @@ static int push_cxx_to_hypervisor(struct acpi_processor *_pr) pr_debug(" C%d: %s %d uS\n", cx->type, cx->desc, (u32)cx->latency); } - } else + } else if (ret != -EINVAL) + /* EINVAL means the ACPI ID is incorrect - meaning the ACPI + * table is referencing a non-existing CPU - which can happen + * with broken ACPI tables. */ pr_err(DRV_NAME "(CX): Hypervisor error (%d) for ACPI CPU%u\n", ret, _pr->acpi_id); -- cgit v1.2.3-18-g5258 From b95ace54a23e2f8ebb032744cebb17c9f43bf651 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Sun, 22 Apr 2012 13:37:24 +0200 Subject: ARM: pxa: fix gpio wakeup setting In 3.3, gpio wakeup setting was broken. The call enable_irq_wake() didn't set up the PXA gpio registers (PWER, ...) anymore. Fix it at least for pxa27x. The driver doesn't seem to be used in pxa25x (weird ...), and the fix doesn't extend to pxa3xx and pxa95x (which don't have a gpio_set_wake() available). Signed-off-by: Robert Jarzmik Signed-off-by: Haojian Zhuang --- arch/arm/mach-pxa/pxa27x.c | 6 +++++- drivers/gpio/gpio-pxa.c | 21 +++++++++++++++++++-- include/linux/gpio-pxa.h | 4 ++++ 3 files changed, 28 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 6bce78edce7..4726c246dcd 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -421,8 +421,11 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info) pxa_register_device(&pxa27x_device_i2c_power, info); } +static struct pxa_gpio_platform_data pxa27x_gpio_info __initdata = { + .gpio_set_wake = gpio_set_wake, +}; + static struct platform_device *devices[] __initdata = { - &pxa_device_gpio, &pxa27x_device_udc, &pxa_device_pmu, &pxa_device_i2s, @@ -458,6 +461,7 @@ static int __init pxa27x_init(void) register_syscore_ops(&pxa2xx_mfp_syscore_ops); register_syscore_ops(&pxa2xx_clock_syscore_ops); + pxa_register_device(&pxa_device_gpio, &pxa27x_gpio_info); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c index 5689ce62fd8..fc3ace3fd4c 100644 --- a/drivers/gpio/gpio-pxa.c +++ b/drivers/gpio/gpio-pxa.c @@ -64,6 +64,7 @@ struct pxa_gpio_chip { unsigned long irq_mask; unsigned long irq_edge_rise; unsigned long irq_edge_fall; + int (*set_wake)(unsigned int gpio, unsigned int on); #ifdef CONFIG_PM unsigned long saved_gplr; @@ -269,7 +270,8 @@ static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value) (value ? GPSR_OFFSET : GPCR_OFFSET)); } -static int __devinit pxa_init_gpio_chip(int gpio_end) +static int __devinit pxa_init_gpio_chip(int gpio_end, + int (*set_wake)(unsigned int, unsigned int)) { int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1; struct pxa_gpio_chip *chips; @@ -285,6 +287,7 @@ static int __devinit pxa_init_gpio_chip(int gpio_end) sprintf(chips[i].label, "gpio-%d", i); chips[i].regbase = gpio_reg_base + BANK_OFF(i); + chips[i].set_wake = set_wake; c->base = gpio; c->label = chips[i].label; @@ -412,6 +415,17 @@ static void pxa_mask_muxed_gpio(struct irq_data *d) writel_relaxed(gfer, c->regbase + GFER_OFFSET); } +static int pxa_gpio_set_wake(struct irq_data *d, unsigned int on) +{ + int gpio = pxa_irq_to_gpio(d->irq); + struct pxa_gpio_chip *c = gpio_to_pxachip(gpio); + + if (c->set_wake) + return c->set_wake(gpio, on); + else + return 0; +} + static void pxa_unmask_muxed_gpio(struct irq_data *d) { int gpio = pxa_irq_to_gpio(d->irq); @@ -427,6 +441,7 @@ static struct irq_chip pxa_muxed_gpio_chip = { .irq_mask = pxa_mask_muxed_gpio, .irq_unmask = pxa_unmask_muxed_gpio, .irq_set_type = pxa_gpio_irq_type, + .irq_set_wake = pxa_gpio_set_wake, }; static int pxa_gpio_nums(void) @@ -471,6 +486,7 @@ static int __devinit pxa_gpio_probe(struct platform_device *pdev) struct pxa_gpio_chip *c; struct resource *res; struct clk *clk; + struct pxa_gpio_platform_data *info; int gpio, irq, ret; int irq0 = 0, irq1 = 0, irq_mux, gpio_offset = 0; @@ -516,7 +532,8 @@ static int __devinit pxa_gpio_probe(struct platform_device *pdev) } /* Initialize GPIO chips */ - pxa_init_gpio_chip(pxa_last_gpio); + info = dev_get_platdata(&pdev->dev); + pxa_init_gpio_chip(pxa_last_gpio, info ? info->gpio_set_wake : NULL); /* clear all GPIO edge detects */ for_each_gpio_chip(gpio, c) { diff --git a/include/linux/gpio-pxa.h b/include/linux/gpio-pxa.h index 05071ee34c3..d755b28ba63 100644 --- a/include/linux/gpio-pxa.h +++ b/include/linux/gpio-pxa.h @@ -13,4 +13,8 @@ extern int pxa_last_gpio; extern int pxa_irq_to_gpio(int irq); +struct pxa_gpio_platform_data { + int (*gpio_set_wake)(unsigned int gpio, unsigned int on); +}; + #endif /* __GPIO_PXA_H */ -- cgit v1.2.3-18-g5258 From 9f9d27e3f3317f39c91c286b6184f1ca05452968 Mon Sep 17 00:00:00 2001 From: Dmitry Artamonow Date: Sat, 14 Apr 2012 10:26:19 +0400 Subject: arm/sa1100: fix sa1100-rtc memory resource DEFINE_RES_MEM() takes the size of resource as a second argument, not the end address. Passing end address leads to following error in runtime during device registration: sa1100-rtc: failed to claim resource 0 Fix it. Signed-off-by: Dmitry Artamonow Signed-off-by: Haojian Zhuang --- arch/arm/mach-sa1100/generic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 7c524b4e415..16be4c56abe 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -306,7 +306,7 @@ void sa11x0_register_irda(struct irda_platform_data *irda) } static struct resource sa1100_rtc_resources[] = { - DEFINE_RES_MEM(0x90010000, 0x9001003f), + DEFINE_RES_MEM(0x90010000, 0x40), DEFINE_RES_IRQ_NAMED(IRQ_RTC1Hz, "rtc 1Hz"), DEFINE_RES_IRQ_NAMED(IRQ_RTCAlrm, "rtc alarm"), }; -- cgit v1.2.3-18-g5258 From a13b878780ea98d8415203c4502a8fc5bc614656 Mon Sep 17 00:00:00 2001 From: Igor Grinberg Date: Thu, 12 Apr 2012 15:43:28 +0300 Subject: ARM: PXA2xx: MFP: fix bug with MFP_LPM_KEEP_OUTPUT Pins that have MFP_LPM_KEEP_OUTPUT set and are configured for output must retain the output state in low power mode. Currently, the pin direction configuration is overrided with values in gpdr_lpm[] array and do not obey the MFP_LPM_KEEP_OUTPUT setting. Fix the above bug and add some documentation to clarify the MFP_LPM_KEEP_OUTPUT setting purpose. Reported-by: Paul Parsons Signed-off-by: Igor Grinberg Tested-by: Paul Parsons Signed-off-by: Haojian Zhuang --- arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h | 7 +++++++ arch/arm/mach-pxa/mfp-pxa2xx.c | 12 ++++++++++-- 2 files changed, 17 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h index c54cef25895..cbf51ae8185 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h @@ -17,6 +17,7 @@ * * bit 23 - Input/Output (PXA2xx specific) * bit 24 - Wakeup Enable(PXA2xx specific) + * bit 25 - Keep Output (PXA2xx specific) */ #define MFP_DIR_IN (0x0 << 23) @@ -25,6 +26,12 @@ #define MFP_DIR(x) (((x) >> 23) & 0x1) #define MFP_LPM_CAN_WAKEUP (0x1 << 24) + +/* + * MFP_LPM_KEEP_OUTPUT must be specified for pins that need to + * retain their last output level (low or high). + * Note: MFP_LPM_KEEP_OUTPUT has no effect on pins configured for input. + */ #define MFP_LPM_KEEP_OUTPUT (0x1 << 25) #define WAKEUP_ON_EDGE_RISE (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE) diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index b0a84288778..d2373d79b65 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -366,14 +366,22 @@ static int pxa2xx_mfp_suspend(void) } for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) { - saved_gafr[0][i] = GAFR_L(i); saved_gafr[1][i] = GAFR_U(i); saved_gpdr[i] = GPDR(i * 32); saved_pgsr[i] = PGSR(i); + } - GPDR(i * 32) = gpdr_lpm[i]; + /* set GPDR bits taking into account MFP_LPM_KEEP_OUTPUT */ + for (i = 0; i < pxa_last_gpio; i++) { + if ((gpdr_lpm[gpio_to_bank(i)] & GPIO_bit(i)) || + ((gpio_desc[i].config & MFP_LPM_KEEP_OUTPUT) && + (saved_gpdr[gpio_to_bank(i)] & GPIO_bit(i)))) + GPDR(i) |= GPIO_bit(i); + else + GPDR(i) &= ~GPIO_bit(i); } + return 0; } -- cgit v1.2.3-18-g5258 From ef7c7c693b4b05a293678fd40ed1511bc94d6f61 Mon Sep 17 00:00:00 2001 From: Igor Grinberg Date: Thu, 12 Apr 2012 15:43:29 +0300 Subject: ARM: PXA2xx: MFP: fix potential direction bug Pins configured as input and have MFP_LPM_DRIVE_* flag set, can have a wrong output value for some period of time (spike) during the suspend sequence. This can happen because the direction of the pins (GPDR) is set by software and the output level is set by hardware (PGSR) at a later stage. Fix the above potential bug by setting the output levels first. Also save the actual levels of the pins before the suspend and restore them after the resume, but before the direction settings take place, so the same bug as described above will not happen in the resume sequence. Reported-by: Paul Parsons Signed-off-by: Igor Grinberg Tested-by: Paul Parsons Signed-off-by: Haojian Zhuang --- arch/arm/mach-pxa/mfp-pxa2xx.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index d2373d79b65..ef0426a159d 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -33,6 +33,8 @@ #define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) #define GPLR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5)) #define GPDR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x0c) +#define GPSR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x18) +#define GPCR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x24) #define PWER_WE35 (1 << 24) @@ -348,6 +350,7 @@ static inline void pxa27x_mfp_init(void) {} #ifdef CONFIG_PM static unsigned long saved_gafr[2][4]; static unsigned long saved_gpdr[4]; +static unsigned long saved_gplr[4]; static unsigned long saved_pgsr[4]; static int pxa2xx_mfp_suspend(void) @@ -369,7 +372,11 @@ static int pxa2xx_mfp_suspend(void) saved_gafr[0][i] = GAFR_L(i); saved_gafr[1][i] = GAFR_U(i); saved_gpdr[i] = GPDR(i * 32); + saved_gplr[i] = GPLR(i * 32); saved_pgsr[i] = PGSR(i); + + GPSR(i * 32) = PGSR(i); + GPCR(i * 32) = ~PGSR(i); } /* set GPDR bits taking into account MFP_LPM_KEEP_OUTPUT */ @@ -392,6 +399,8 @@ static void pxa2xx_mfp_resume(void) for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) { GAFR_L(i) = saved_gafr[0][i]; GAFR_U(i) = saved_gafr[1][i]; + GPSR(i * 32) = saved_gplr[i]; + GPCR(i * 32) = ~saved_gplr[i]; GPDR(i * 32) = saved_gpdr[i]; PGSR(i) = saved_pgsr[i]; } -- cgit v1.2.3-18-g5258 From df391c0df49560c7fceffbad5b9d083836d9f22f Mon Sep 17 00:00:00 2001 From: Ilija Hadzic Date: Thu, 19 Apr 2012 12:22:20 -0400 Subject: drm/radeon: add a missing entry to encoder_names An entry for INTERNAL_VCE encoder was missing. Add it. Signed-off-by: Ilija Hadzic Reviewed-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_display.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 8086c96e0b0..0a1d4bd65ed 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -533,7 +533,7 @@ static void radeon_crtc_init(struct drm_device *dev, int index) radeon_legacy_init_crtc(dev, radeon_crtc); } -static const char *encoder_names[36] = { +static const char *encoder_names[37] = { "NONE", "INTERNAL_LVDS", "INTERNAL_TMDS1", @@ -570,6 +570,7 @@ static const char *encoder_names[36] = { "INTERNAL_UNIPHY2", "NUTMEG", "TRAVIS", + "INTERNAL_VCE" }; static const char *connector_names[15] = { -- cgit v1.2.3-18-g5258 From 37d4174d2d252c37dcb3d88cafae488542087848 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 19 Apr 2012 10:48:38 -0400 Subject: drm/radeon/kms: use frac fb div on APUs Seems to be more stable on certain monitors. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=48880 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index b5ff1f7b6f7..c5c31e091a9 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -575,6 +575,9 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc, if (rdev->family < CHIP_RV770) pll->flags |= RADEON_PLL_PREFER_MINM_OVER_MAXP; + /* use frac fb div on APUs */ + if (ASIC_IS_DCE41(rdev) || ASIC_IS_DCE61(rdev)) + pll->flags |= RADEON_PLL_USE_FRAC_FB_DIV; } else { pll->flags |= RADEON_PLL_LEGACY; -- cgit v1.2.3-18-g5258 From 83a787a71e034244a9fd1d5988fe18f226341417 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Fri, 27 Apr 2012 11:02:15 +0300 Subject: usb: gadget: udc-core: fix wrong call order commit 6d258a4 (usb: gadget: udc-core: stop UDC on device-initiated disconnect) introduced another case of asymmetric calls when issuing a device-initiated disconnect. Fix it. Reported-by: Ben Hutchings Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c index 2fa9865babe..df1bd87232d 100644 --- a/drivers/usb/gadget/udc-core.c +++ b/drivers/usb/gadget/udc-core.c @@ -415,9 +415,9 @@ static ssize_t usb_udc_softconn_store(struct device *dev, usb_gadget_udc_start(udc->gadget, udc->driver); usb_gadget_connect(udc->gadget); } else if (sysfs_streq(buf, "disconnect")) { + usb_gadget_disconnect(udc->gadget); if (udc_is_newstyle(udc)) usb_gadget_udc_stop(udc->gadget, udc->driver); - usb_gadget_disconnect(udc->gadget); } else { dev_err(dev, "unsupported command '%s'\n", buf); return -EINVAL; -- cgit v1.2.3-18-g5258 From 320cd1e750f1bf3e47eb41209dcb2be07264cb76 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 26 Apr 2012 11:31:57 -0400 Subject: usb: gadget: udc-core: fix incompatibility with dummy-hcd This patch (as1548) fixes a recently-introduced incompatibility between the UDC core and the dummy-hcd driver. Commit 8ae8090c82eb407267001f75b3d256b3bd4ae691 (usb: gadget: udc-core: fix asymmetric calls in remove_driver) moved the usb_gadget_udc_stop() call in usb_gadget_remove_driver() below the usb_gadget_disconnect() call. As a result, usb_gadget_disconnect() gets called at a time when the gadget driver believes it has been unbound but dummy-hcd believes it has not. A nasty error ensues when dummy-hcd calls the gadget driver's disconnect method a second time. To fix the problem, this patch moves the gadget driver's unbind notification after the usb_gadget_disconnect() call. Now nothing happens between the two unbind notifications, so nothing goes wrong. Signed-off-by: Alan Stern Tested-by: Alexander Shishkin Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c index df1bd87232d..e5e44f8cde9 100644 --- a/drivers/usb/gadget/udc-core.c +++ b/drivers/usb/gadget/udc-core.c @@ -263,8 +263,8 @@ static void usb_gadget_remove_driver(struct usb_udc *udc) if (udc_is_newstyle(udc)) { udc->driver->disconnect(udc->gadget); - udc->driver->unbind(udc->gadget); usb_gadget_disconnect(udc->gadget); + udc->driver->unbind(udc->gadget); usb_gadget_udc_stop(udc->gadget, udc->driver); } else { usb_gadget_stop(udc->gadget, udc->driver); -- cgit v1.2.3-18-g5258 From 5eb806a3a68920a9f373f18b03fa14852047e62b Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 19 Apr 2012 14:44:21 +0530 Subject: spi/pl022: Fix calculate_effective_freq() calculate_effective_freq() was still not optimized and there were cases when it returned without error and with values of cpsr and scr as zero. Also, the variable named found is not used well. This patch targets to optimize and correct this routine. Tested for SPEAr. Signed-off-by: Viresh Kumar Tested-by: Vinit Kamalaksha Shenoy Acked-by: Linus Walleij Signed-off-by: Grant Likely --- drivers/spi/spi-pl022.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index 1ead49dbebc..8aa44e7adae 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -1681,26 +1681,37 @@ static int calculate_effective_freq(struct pl022 *pl022, int freq, struct while (scr <= SCR_MAX) { tmp = spi_rate(rate, cpsdvsr, scr); - if (tmp > freq) + if (tmp > freq) { + /* we need lower freq */ scr++; + continue; + } + /* - * If found exact value, update and break. - * If found more closer value, update and continue. + * If found exact value, mark found and break. + * If found more closer value, update and break. */ - else if ((tmp == freq) || (tmp > best_freq)) { + if (tmp > best_freq) { best_freq = tmp; best_cpsdvsr = cpsdvsr; best_scr = scr; if (tmp == freq) - break; + found = 1; } - scr++; + /* + * increased scr will give lower rates, which are not + * required + */ + break; } cpsdvsr += 2; scr = SCR_MIN; } + WARN(!best_freq, "pl022: Matching cpsdvsr and scr not found for %d Hz rate \n", + freq); + clk_freq->cpsdvsr = (u8) (best_cpsdvsr & 0xFF); clk_freq->scr = (u8) (best_scr & 0xFF); dev_dbg(&pl022->adev->dev, -- cgit v1.2.3-18-g5258 From dbabe0d659d3cfe42830a779909ab3cd42f7b027 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 17 Apr 2012 17:03:50 -0700 Subject: spi: fix spi.h kernel-doc warning Fix kernel-doc warning in spi.h (copy/paste): Warning(include/linux/spi/spi.h:365): No description found for parameter 'unprepare_transfer_hardware' Signed-off-by: Randy Dunlap Signed-off-by: Grant Likely --- include/linux/spi/spi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 98679b061b6..fa702aeb503 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -254,7 +254,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * driver is finished with this message, it must call * spi_finalize_current_message() so the subsystem can issue the next * transfer - * @prepare_transfer_hardware: there are currently no more messages on the + * @unprepare_transfer_hardware: there are currently no more messages on the * queue so the subsystem notifies the driver that it may relax the * hardware by issuing this call * -- cgit v1.2.3-18-g5258 From d4b9b578cba7231c1fbafbe901a2e8f38654e056 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Tue, 17 Apr 2012 18:46:36 -0700 Subject: spi/spi-ep93xx.c: use dma_transfer_direction instead of dma_data_direction A new enum indicating the dma channel direction was introduced by: commit 49920bc66984a512f4bcc7735a61642cd0e4d6f2 dmaengine: add new enum dma_transfer_direction The following commit changed spi-ep93xx to use the new enum: commit a485df4b4404379786c4bdd258bc528b2617449d spi, serial: move to dma_transfer_direction In doing so a sparse warning was introduced: warning: mixing different enum types int enum dma_data_direction versus int enum dma_transfer_direction This is produced because the 'dir' passed in ep93xx_spi_dma_prepare is an enum dma_data_direction and is being used to set the dma_slave_config 'direction' which is now an enum dma_transfer_direction. Fix this by converting spi-ep93xx to use the new enum type in all places. Signed-off-by: H Hartley Sweeten Acked-by: Mika Westerberg Acked-by: Vinod Koul Signed-off-by: Grant Likely --- drivers/spi/spi-ep93xx.c | 24 ++++++++++-------------- 1 file changed, 10 insertions(+), 14 deletions(-) diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c index 6db2887852d..e8055073e84 100644 --- a/drivers/spi/spi-ep93xx.c +++ b/drivers/spi/spi-ep93xx.c @@ -545,13 +545,12 @@ static void ep93xx_spi_pio_transfer(struct ep93xx_spi *espi) * in case of failure. */ static struct dma_async_tx_descriptor * -ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir) +ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_transfer_direction dir) { struct spi_transfer *t = espi->current_msg->state; struct dma_async_tx_descriptor *txd; enum dma_slave_buswidth buswidth; struct dma_slave_config conf; - enum dma_transfer_direction slave_dirn; struct scatterlist *sg; struct sg_table *sgt; struct dma_chan *chan; @@ -567,14 +566,13 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir) memset(&conf, 0, sizeof(conf)); conf.direction = dir; - if (dir == DMA_FROM_DEVICE) { + if (dir == DMA_DEV_TO_MEM) { chan = espi->dma_rx; buf = t->rx_buf; sgt = &espi->rx_sgt; conf.src_addr = espi->sspdr_phys; conf.src_addr_width = buswidth; - slave_dirn = DMA_DEV_TO_MEM; } else { chan = espi->dma_tx; buf = t->tx_buf; @@ -582,7 +580,6 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir) conf.dst_addr = espi->sspdr_phys; conf.dst_addr_width = buswidth; - slave_dirn = DMA_MEM_TO_DEV; } ret = dmaengine_slave_config(chan, &conf); @@ -633,8 +630,7 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir) if (!nents) return ERR_PTR(-ENOMEM); - txd = dmaengine_prep_slave_sg(chan, sgt->sgl, nents, - slave_dirn, DMA_CTRL_ACK); + txd = dmaengine_prep_slave_sg(chan, sgt->sgl, nents, dir, DMA_CTRL_ACK); if (!txd) { dma_unmap_sg(chan->device->dev, sgt->sgl, sgt->nents, dir); return ERR_PTR(-ENOMEM); @@ -651,12 +647,12 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir) * unmapped. */ static void ep93xx_spi_dma_finish(struct ep93xx_spi *espi, - enum dma_data_direction dir) + enum dma_transfer_direction dir) { struct dma_chan *chan; struct sg_table *sgt; - if (dir == DMA_FROM_DEVICE) { + if (dir == DMA_DEV_TO_MEM) { chan = espi->dma_rx; sgt = &espi->rx_sgt; } else { @@ -677,16 +673,16 @@ static void ep93xx_spi_dma_transfer(struct ep93xx_spi *espi) struct spi_message *msg = espi->current_msg; struct dma_async_tx_descriptor *rxd, *txd; - rxd = ep93xx_spi_dma_prepare(espi, DMA_FROM_DEVICE); + rxd = ep93xx_spi_dma_prepare(espi, DMA_DEV_TO_MEM); if (IS_ERR(rxd)) { dev_err(&espi->pdev->dev, "DMA RX failed: %ld\n", PTR_ERR(rxd)); msg->status = PTR_ERR(rxd); return; } - txd = ep93xx_spi_dma_prepare(espi, DMA_TO_DEVICE); + txd = ep93xx_spi_dma_prepare(espi, DMA_MEM_TO_DEV); if (IS_ERR(txd)) { - ep93xx_spi_dma_finish(espi, DMA_FROM_DEVICE); + ep93xx_spi_dma_finish(espi, DMA_DEV_TO_MEM); dev_err(&espi->pdev->dev, "DMA TX failed: %ld\n", PTR_ERR(rxd)); msg->status = PTR_ERR(txd); return; @@ -705,8 +701,8 @@ static void ep93xx_spi_dma_transfer(struct ep93xx_spi *espi) wait_for_completion(&espi->wait); - ep93xx_spi_dma_finish(espi, DMA_TO_DEVICE); - ep93xx_spi_dma_finish(espi, DMA_FROM_DEVICE); + ep93xx_spi_dma_finish(espi, DMA_MEM_TO_DEV); + ep93xx_spi_dma_finish(espi, DMA_DEV_TO_MEM); } /** -- cgit v1.2.3-18-g5258 From cde4384e1037c15e5dd04c68d19c75798b6281dd Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 20 Apr 2012 15:37:33 +0200 Subject: spi/bcm63xx: convert to the pump message infrastructure This patch converts the bcm63xx SPI driver to use the SPI infrastructure pump message queue. Since we were previously sleeping in the SPI driver's transfer() function (which is not allowed) this is now fixed as well. To complete that conversion a certain number of changes have been made: - the transfer len is split into multiple hardware transfers in case its size is bigger than the hardware FIFO size - the FIFO refill is no longer done in the interrupt context, which was a bad idea leading to quick interrupt handler re-entrancy Tested-by: Tanguy Bouzeloc Signed-off-by: Florian Fainelli Signed-off-by: Grant Likely --- drivers/spi/spi-bcm63xx.c | 149 +++++++++++++++++++++++++++------------------- 1 file changed, 89 insertions(+), 60 deletions(-) diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c index f01b2648452..63b0028a8bd 100644 --- a/drivers/spi/spi-bcm63xx.c +++ b/drivers/spi/spi-bcm63xx.c @@ -1,7 +1,7 @@ /* * Broadcom BCM63xx SPI controller support * - * Copyright (C) 2009-2011 Florian Fainelli + * Copyright (C) 2009-2012 Florian Fainelli * Copyright (C) 2010 Tanguy Bouzeloc * * This program is free software; you can redistribute it and/or @@ -30,6 +30,8 @@ #include #include #include +#include +#include #include @@ -96,17 +98,12 @@ static const unsigned bcm63xx_spi_freq_table[SPI_CLK_MASK][2] = { { 391000, SPI_CLK_0_391MHZ } }; -static int bcm63xx_spi_setup_transfer(struct spi_device *spi, - struct spi_transfer *t) +static int bcm63xx_spi_check_transfer(struct spi_device *spi, + struct spi_transfer *t) { - struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); u8 bits_per_word; - u8 clk_cfg, reg; - u32 hz; - int i; bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word; - hz = (t) ? t->speed_hz : spi->max_speed_hz; if (bits_per_word != 8) { dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n", __func__, bits_per_word); @@ -119,6 +116,19 @@ static int bcm63xx_spi_setup_transfer(struct spi_device *spi, return -EINVAL; } + return 0; +} + +static void bcm63xx_spi_setup_transfer(struct spi_device *spi, + struct spi_transfer *t) +{ + struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); + u32 hz; + u8 clk_cfg, reg; + int i; + + hz = (t) ? t->speed_hz : spi->max_speed_hz; + /* Find the closest clock configuration */ for (i = 0; i < SPI_CLK_MASK; i++) { if (hz <= bcm63xx_spi_freq_table[i][0]) { @@ -139,8 +149,6 @@ static int bcm63xx_spi_setup_transfer(struct spi_device *spi, bcm_spi_writeb(bs, reg, SPI_CLK_CFG); dev_dbg(&spi->dev, "Setting clock register to %02x (hz %d)\n", clk_cfg, hz); - - return 0; } /* the spi->mode bits understood by this driver: */ @@ -165,7 +173,7 @@ static int bcm63xx_spi_setup(struct spi_device *spi) return -EINVAL; } - ret = bcm63xx_spi_setup_transfer(spi, NULL); + ret = bcm63xx_spi_check_transfer(spi, NULL); if (ret < 0) { dev_err(&spi->dev, "setup: unsupported mode bits %x\n", spi->mode & ~MODEBITS); @@ -190,28 +198,29 @@ static void bcm63xx_spi_fill_tx_fifo(struct bcm63xx_spi *bs) bs->remaining_bytes -= size; } -static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) +static unsigned int bcm63xx_txrx_bufs(struct spi_device *spi, + struct spi_transfer *t) { struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); u16 msg_ctl; u16 cmd; + /* Disable the CMD_DONE interrupt */ + bcm_spi_writeb(bs, 0, SPI_INT_MASK); + dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n", t->tx_buf, t->rx_buf, t->len); /* Transmitter is inhibited */ bs->tx_ptr = t->tx_buf; bs->rx_ptr = t->rx_buf; - init_completion(&bs->done); if (t->tx_buf) { bs->remaining_bytes = t->len; bcm63xx_spi_fill_tx_fifo(bs); } - /* Enable the command done interrupt which - * we use to determine completion of a command */ - bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK); + init_completion(&bs->done); /* Fill in the Message control register */ msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT); @@ -230,33 +239,76 @@ static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT); cmd |= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT); bcm_spi_writew(bs, cmd, SPI_CMD); - wait_for_completion(&bs->done); - /* Disable the CMD_DONE interrupt */ - bcm_spi_writeb(bs, 0, SPI_INT_MASK); + /* Enable the CMD_DONE interrupt */ + bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK); return t->len - bs->remaining_bytes; } -static int bcm63xx_transfer(struct spi_device *spi, struct spi_message *m) +static int bcm63xx_spi_prepare_transfer(struct spi_master *master) { - struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); - struct spi_transfer *t; - int ret = 0; + struct bcm63xx_spi *bs = spi_master_get_devdata(master); - if (unlikely(list_empty(&m->transfers))) - return -EINVAL; + pm_runtime_get_sync(&bs->pdev->dev); - if (bs->stopping) - return -ESHUTDOWN; + return 0; +} + +static int bcm63xx_spi_unprepare_transfer(struct spi_master *master) +{ + struct bcm63xx_spi *bs = spi_master_get_devdata(master); + + pm_runtime_put(&bs->pdev->dev); + + return 0; +} + +static int bcm63xx_spi_transfer_one(struct spi_master *master, + struct spi_message *m) +{ + struct bcm63xx_spi *bs = spi_master_get_devdata(master); + struct spi_transfer *t; + struct spi_device *spi = m->spi; + int status = 0; + unsigned int timeout = 0; list_for_each_entry(t, &m->transfers, transfer_list) { - ret += bcm63xx_txrx_bufs(spi, t); - } + unsigned int len = t->len; + u8 rx_tail; - m->complete(m->context); + status = bcm63xx_spi_check_transfer(spi, t); + if (status < 0) + goto exit; - return ret; + /* configure adapter for a new transfer */ + bcm63xx_spi_setup_transfer(spi, t); + + while (len) { + /* send the data */ + len -= bcm63xx_txrx_bufs(spi, t); + + timeout = wait_for_completion_timeout(&bs->done, HZ); + if (!timeout) { + status = -ETIMEDOUT; + goto exit; + } + + /* read out all data */ + rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL); + + /* Read out all the data */ + if (rx_tail) + memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail); + } + + m->actual_length += t->len; + } +exit: + m->status = status; + spi_finalize_current_message(master); + + return 0; } /* This driver supports single master mode only. Hence @@ -267,39 +319,15 @@ static irqreturn_t bcm63xx_spi_interrupt(int irq, void *dev_id) struct spi_master *master = (struct spi_master *)dev_id; struct bcm63xx_spi *bs = spi_master_get_devdata(master); u8 intr; - u16 cmd; /* Read interupts and clear them immediately */ intr = bcm_spi_readb(bs, SPI_INT_STATUS); bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS); bcm_spi_writeb(bs, 0, SPI_INT_MASK); - /* A tansfer completed */ - if (intr & SPI_INTR_CMD_DONE) { - u8 rx_tail; - - rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL); - - /* Read out all the data */ - if (rx_tail) - memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail); - - /* See if there is more data to send */ - if (bs->remaining_bytes > 0) { - bcm63xx_spi_fill_tx_fifo(bs); - - /* Start the transfer */ - bcm_spi_writew(bs, SPI_HD_W << SPI_MSG_TYPE_SHIFT, - SPI_MSG_CTL); - cmd = bcm_spi_readw(bs, SPI_CMD); - cmd |= SPI_CMD_START_IMMEDIATE; - cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT); - bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK); - bcm_spi_writew(bs, cmd, SPI_CMD); - } else { - complete(&bs->done); - } - } + /* A transfer completed */ + if (intr & SPI_INTR_CMD_DONE) + complete(&bs->done); return IRQ_HANDLED; } @@ -345,7 +373,6 @@ static int __devinit bcm63xx_spi_probe(struct platform_device *pdev) } bs = spi_master_get_devdata(master); - init_completion(&bs->done); platform_set_drvdata(pdev, master); bs->pdev = pdev; @@ -379,7 +406,9 @@ static int __devinit bcm63xx_spi_probe(struct platform_device *pdev) master->bus_num = pdata->bus_num; master->num_chipselect = pdata->num_chipselect; master->setup = bcm63xx_spi_setup; - master->transfer = bcm63xx_transfer; + master->prepare_transfer_hardware = bcm63xx_spi_prepare_transfer; + master->unprepare_transfer_hardware = bcm63xx_spi_unprepare_transfer; + master->transfer_one_message = bcm63xx_spi_transfer_one; bs->speed_hz = pdata->speed_hz; bs->stopping = 0; bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA)); -- cgit v1.2.3-18-g5258 From 1e41dc0ee2f3807328db95e4f87ff1333245190f Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 20 Apr 2012 15:37:34 +0200 Subject: spi/bcm63xx: don't use the stopping state We do not need to use a flag to indicate if the master driver is stopping it is sufficient to perform spi master unregistering in the platform driver's remove function. Signed-off-by: Florian Fainelli Signed-off-by: Grant Likely --- drivers/spi/spi-bcm63xx.c | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-) diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c index 63b0028a8bd..80e5ed34e0d 100644 --- a/drivers/spi/spi-bcm63xx.c +++ b/drivers/spi/spi-bcm63xx.c @@ -39,8 +39,6 @@ #define DRV_VER "0.1.2" struct bcm63xx_spi { - spinlock_t lock; - int stopping; struct completion done; void __iomem *regs; @@ -161,9 +159,6 @@ static int bcm63xx_spi_setup(struct spi_device *spi) bs = spi_master_get_devdata(spi->master); - if (bs->stopping) - return -ESHUTDOWN; - if (!spi->bits_per_word) spi->bits_per_word = 8; @@ -410,10 +405,8 @@ static int __devinit bcm63xx_spi_probe(struct platform_device *pdev) master->unprepare_transfer_hardware = bcm63xx_spi_unprepare_transfer; master->transfer_one_message = bcm63xx_spi_transfer_one; bs->speed_hz = pdata->speed_hz; - bs->stopping = 0; bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA)); bs->rx_io = (const u8 *)(bs->regs + bcm63xx_spireg(SPI_RX_DATA)); - spin_lock_init(&bs->lock); /* Initialize hardware */ clk_enable(bs->clk); @@ -447,18 +440,16 @@ static int __devexit bcm63xx_spi_remove(struct platform_device *pdev) struct spi_master *master = platform_get_drvdata(pdev); struct bcm63xx_spi *bs = spi_master_get_devdata(master); + spi_unregister_master(master); + /* reset spi block */ bcm_spi_writeb(bs, 0, SPI_INT_MASK); - spin_lock(&bs->lock); - bs->stopping = 1; /* HW shutdown */ clk_disable(bs->clk); clk_put(bs->clk); - spin_unlock(&bs->lock); platform_set_drvdata(pdev, 0); - spi_unregister_master(master); return 0; } -- cgit v1.2.3-18-g5258 From 88a3a255a510ed193bf0cc35424761c3c9247586 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 20 Apr 2012 15:37:35 +0200 Subject: spi/bcm63xx: set master driver mode_bits. We were not properly advertising the MODE bits supported by this driver, fix that. Signed-off-by: Florian Fainelli Signed-off-by: Grant Likely --- drivers/spi/spi-bcm63xx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c index 80e5ed34e0d..7491971139a 100644 --- a/drivers/spi/spi-bcm63xx.c +++ b/drivers/spi/spi-bcm63xx.c @@ -404,6 +404,7 @@ static int __devinit bcm63xx_spi_probe(struct platform_device *pdev) master->prepare_transfer_hardware = bcm63xx_spi_prepare_transfer; master->unprepare_transfer_hardware = bcm63xx_spi_unprepare_transfer; master->transfer_one_message = bcm63xx_spi_transfer_one; + master->mode_bits = MODEBITS; bs->speed_hz = pdata->speed_hz; bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA)); bs->rx_io = (const u8 *)(bs->regs + bcm63xx_spireg(SPI_RX_DATA)); -- cgit v1.2.3-18-g5258 From 996d282c7ff470f150a467eb4815b90159d04c47 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Mon, 23 Apr 2012 20:35:03 -0400 Subject: Btrfs: do not start delalloc inodes during sync btrfs_start_delalloc_inodes will just walk the list of delalloc inodes and start writing them out, but it doesn't splice the list or anything so as long as somebody is doing work on the box you could end up in this section _forever_. So just remove it, it's not needed anyway since sync will start writeback on all inodes anyway, all we need to do is wait for ordered extents and then we can commit the transaction. In my horrible torture test sync goes from taking 4 minutes to about 1.5 minutes. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/super.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 43aa2dd0bc7..f267718cbd1 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -819,7 +819,6 @@ int btrfs_sync_fs(struct super_block *sb, int wait) return 0; } - btrfs_start_delalloc_inodes(root, 0); btrfs_wait_ordered_extents(root, 0, 0); trans = btrfs_start_transaction(root, 0); -- cgit v1.2.3-18-g5258 From 3e74317ad773ba9df36db1fa32848cba41ac4d1a Mon Sep 17 00:00:00 2001 From: Jan Schmidt Date: Fri, 27 Apr 2012 12:41:45 -0400 Subject: Btrfs: fix repair code for RAID10 btrfs_map_block sets mirror_num, so that the repair code knows eventually which device gave us the read error. For RAID10, mirror_num must be 1 or 2. Before this fix mirror_num was incorrectly related to our stripe index. Signed-off-by: Jan Schmidt Signed-off-by: Chris Mason --- fs/btrfs/volumes.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 3b984173d25..1411b99555a 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -3807,10 +3807,11 @@ static int __btrfs_map_block(struct btrfs_mapping_tree *map_tree, int rw, else if (mirror_num) stripe_index += mirror_num - 1; else { + int old_stripe_index = stripe_index; stripe_index = find_live_mirror(map, stripe_index, map->sub_stripes, stripe_index + current->pid % map->sub_stripes); - mirror_num = stripe_index + 1; + mirror_num = stripe_index - old_stripe_index + 1; } } else { /* -- cgit v1.2.3-18-g5258 From 1daf3540fa77faea2f91d96bcaf07ce48ee827be Mon Sep 17 00:00:00 2001 From: Daniel J Blueman Date: Fri, 27 Apr 2012 12:41:46 -0400 Subject: Btrfs: Prevent root_list corruption I was seeing root_list corruption on unmount during fs resize in 3.4-rc4; add correct locking to address this. Signed-off-by: Daniel J Blueman Signed-off-by: Chris Mason --- fs/btrfs/relocation.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index 017281dbb2a..5a105a086ac 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -1279,7 +1279,9 @@ static int __update_reloc_root(struct btrfs_root *root, int del) if (rb_node) backref_tree_panic(rb_node, -EEXIST, node->bytenr); } else { + spin_lock(&root->fs_info->trans_lock); list_del_init(&root->root_list); + spin_unlock(&root->fs_info->trans_lock); kfree(node); } return 0; -- cgit v1.2.3-18-g5258 From 1f699d38b6556c393ac80f1c23c2053502a51631 Mon Sep 17 00:00:00 2001 From: Stefan Behrens Date: Fri, 27 Apr 2012 12:41:46 -0400 Subject: Btrfs: fix block_rsv and space_info lock ordering may_commit_transaction() calls spin_lock(&space_info->lock); spin_lock(&delayed_rsv->lock); and update_global_block_rsv() calls spin_lock(&block_rsv->lock); spin_lock(&sinfo->lock); Lockdep complains about this at run time. Everywhere except in update_global_block_rsv(), the space_info lock is the outer lock, therefore the locking order in update_global_block_rsv() is changed. Signed-off-by: Stefan Behrens Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 84497f8eb04..6fc2e6f5aab 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -4214,8 +4214,8 @@ static void update_global_block_rsv(struct btrfs_fs_info *fs_info) num_bytes = calc_global_metadata_size(fs_info); - spin_lock(&block_rsv->lock); spin_lock(&sinfo->lock); + spin_lock(&block_rsv->lock); block_rsv->size = num_bytes; @@ -4241,8 +4241,8 @@ static void update_global_block_rsv(struct btrfs_fs_info *fs_info) block_rsv->full = 1; } - spin_unlock(&sinfo->lock); spin_unlock(&block_rsv->lock); + spin_unlock(&sinfo->lock); } static void init_global_block_rsv(struct btrfs_fs_info *fs_info) -- cgit v1.2.3-18-g5258 From 7654b72417e10e294563496e25211200f9b8b6d3 Mon Sep 17 00:00:00 2001 From: Daniel J Blueman Date: Fri, 27 Apr 2012 12:41:46 -0400 Subject: Btrfs: Fix space checking during fs resize Fix out-of-space checking, addressing a warning and potential resource leak when resizing the filesystem down while allocating blocks. Signed-off-by: Daniel J Blueman Reviewed-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/relocation.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index 5a105a086ac..646ee21bb03 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -3813,7 +3813,7 @@ restart: ret = btrfs_block_rsv_check(rc->extent_root, rc->block_rsv, 5); if (ret < 0) { - if (ret != -EAGAIN) { + if (ret != -ENOSPC) { err = ret; WARN_ON(1); break; -- cgit v1.2.3-18-g5258 From ea505bc99f77f3f9db02bb965bd59ac5db063f60 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 19 Apr 2012 11:48:15 +0530 Subject: spi/pl022: Allow request for higher frequency than maximum possible Currently, if we request for frequency greater than maximum possible, spi driver returns error. For example, if the spi block src frequency is 333/4 MHz, i.e. 83.33.. MHz, maximum frequency programmable would be src/2. Which would come around 41.6... It is difficult to pass frequency in these figures. We normally try to program in round figures, like 42 MHz and it should get programmed to <= requested_frequency, i.e. 41.6... For this to happen, we must not return error even if requested freq is higher than max possible. But should program it to max possible. Reported-by: Vinit Kamalaksha Shenoy Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Grant Likely --- drivers/spi/spi-pl022.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index 8aa44e7adae..400ae2121a2 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -1667,9 +1667,15 @@ static int calculate_effective_freq(struct pl022 *pl022, int freq, struct /* cpsdvsr = 254 & scr = 255 */ min_tclk = spi_rate(rate, CPSDVR_MAX, SCR_MAX); - if (!((freq <= max_tclk) && (freq >= min_tclk))) { + if (freq > max_tclk) + dev_warn(&pl022->adev->dev, + "Max speed that can be programmed is %d Hz, you requested %d\n", + max_tclk, freq); + + if (freq < min_tclk) { dev_err(&pl022->adev->dev, - "controller data is incorrect: out of range frequency"); + "Requested frequency: %d Hz is less than minimum possible %d Hz\n", + freq, min_tclk); return -EINVAL; } -- cgit v1.2.3-18-g5258 From 22ac3e82e1d3e5cad92538fe4ab51906cb220444 Mon Sep 17 00:00:00 2001 From: Scott Jiang Date: Mon, 23 Apr 2012 18:18:08 -0400 Subject: spi/bfin5xx: rename config macro name for bfin5xx spi controller driver This controller is only for blackfin 5xx soc, so rename it to BFIN5XX Signed-off-by: Scott Jiang Signed-off-by: Grant Likely --- drivers/spi/Kconfig | 2 +- drivers/spi/Makefile | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 3ed748355b9..00c024039c9 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -74,7 +74,7 @@ config SPI_ATMEL This selects a driver for the Atmel SPI Controller, present on many AT32 (AVR32) and AT91 (ARM) chips. -config SPI_BFIN +config SPI_BFIN5XX tristate "SPI controller driver for ADI Blackfin5xx" depends on BLACKFIN help diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index a1d48e0ba3d..9d75d2198ff 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -15,7 +15,7 @@ obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o obj-$(CONFIG_SPI_ATH79) += spi-ath79.o obj-$(CONFIG_SPI_AU1550) += spi-au1550.o obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o -obj-$(CONFIG_SPI_BFIN) += spi-bfin5xx.o +obj-$(CONFIG_SPI_BFIN5XX) += spi-bfin5xx.o obj-$(CONFIG_SPI_BFIN_SPORT) += spi-bfin-sport.o obj-$(CONFIG_SPI_BITBANG) += spi-bitbang.o obj-$(CONFIG_SPI_BUTTERFLY) += spi-butterfly.o -- cgit v1.2.3-18-g5258 From 488e1a9de27f0a299fc185f0b5c67246a3f0c6c9 Mon Sep 17 00:00:00 2001 From: Scott Jiang Date: Mon, 23 Apr 2012 18:18:09 -0400 Subject: spi/spi-bfin-sport: move word length setup to transfer handler Each transfer may have its own bits per word. Signed-off-by: Scott Jiang Signed-off-by: Grant Likely --- drivers/spi/spi-bfin-sport.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/spi/spi-bfin-sport.c b/drivers/spi/spi-bfin-sport.c index 248a2cc671a..bfd90474c7e 100644 --- a/drivers/spi/spi-bfin-sport.c +++ b/drivers/spi/spi-bfin-sport.c @@ -252,19 +252,15 @@ static void bfin_sport_spi_restore_state(struct bfin_sport_spi_master_data *drv_data) { struct bfin_sport_spi_slave_data *chip = drv_data->cur_chip; - unsigned int bits = (drv_data->ops == &bfin_sport_transfer_ops_u8 ? 7 : 15); bfin_sport_spi_disable(drv_data); dev_dbg(drv_data->dev, "restoring spi ctl state\n"); bfin_write(&drv_data->regs->tcr1, chip->ctl_reg); - bfin_write(&drv_data->regs->tcr2, bits); bfin_write(&drv_data->regs->tclkdiv, chip->baud); - bfin_write(&drv_data->regs->tfsdiv, bits); SSYNC(); bfin_write(&drv_data->regs->rcr1, chip->ctl_reg & ~(ITCLK | ITFS)); - bfin_write(&drv_data->regs->rcr2, bits); SSYNC(); bfin_sport_spi_cs_active(chip); @@ -425,6 +421,9 @@ bfin_sport_spi_pump_transfers(unsigned long data) drv_data->ops = &bfin_sport_transfer_ops_u8; else drv_data->ops = &bfin_sport_transfer_ops_u16; + bfin_write(&drv_data->regs->tcr2, bits_per_word - 1); + bfin_write(&drv_data->regs->tfsdiv, bits_per_word - 1); + bfin_write(&drv_data->regs->rcr2, bits_per_word - 1); drv_data->state = RUNNING_STATE; -- cgit v1.2.3-18-g5258 From 7666fd8b02af87a8b672b00d47e56d77f709127e Mon Sep 17 00:00:00 2001 From: Scott Jiang Date: Mon, 23 Apr 2012 18:18:10 -0400 Subject: spi/bfin_spi: drop bits_per_word from client data No other SPI controller has this field, and SPI clients should be setting this up in their own drivers. So drop it from the Blackfin controller to keep people from using it. Signed-off-by: Mike Frysinger Signed-off-by: Scott Jiang Signed-off-by: Grant Likely --- drivers/spi/spi-bfin5xx.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/spi/spi-bfin5xx.c b/drivers/spi/spi-bfin5xx.c index 3b83ff8b1e2..c0cdcb7c813 100644 --- a/drivers/spi/spi-bfin5xx.c +++ b/drivers/spi/spi-bfin5xx.c @@ -1026,7 +1026,6 @@ static int bfin_spi_setup(struct spi_device *spi) chip->cs_chg_udelay = chip_info->cs_chg_udelay; chip->idle_tx_val = chip_info->idle_tx_val; chip->pio_interrupt = chip_info->pio_interrupt; - spi->bits_per_word = chip_info->bits_per_word; } else { /* force a default base state */ chip->ctl_reg &= bfin_ctl_reg; -- cgit v1.2.3-18-g5258 From 8d9d2a4b6ca0013b62a438808d22bdd615abcd00 Mon Sep 17 00:00:00 2001 From: Scott Jiang Date: Mon, 23 Apr 2012 18:18:11 -0400 Subject: spi/spi_bfin_sport: drop bits_per_word from client data Since the member was dropped from the common Blackfin header, we need to stop using it in the SPORT driver too. Signed-off-by: Mike Frysinger Signed-off-by: Scott Jiang Signed-off-by: Grant Likely --- drivers/spi/spi-bfin-sport.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/spi/spi-bfin-sport.c b/drivers/spi/spi-bfin-sport.c index bfd90474c7e..1fe51198a62 100644 --- a/drivers/spi/spi-bfin-sport.c +++ b/drivers/spi/spi-bfin-sport.c @@ -416,11 +416,12 @@ bfin_sport_spi_pump_transfers(unsigned long data) drv_data->cs_change = transfer->cs_change; /* Bits per word setup */ - bits_per_word = transfer->bits_per_word ? : message->spi->bits_per_word; - if (bits_per_word == 8) - drv_data->ops = &bfin_sport_transfer_ops_u8; - else + bits_per_word = transfer->bits_per_word ? : + message->spi->bits_per_word ? : 8; + if (bits_per_word % 16 == 0) drv_data->ops = &bfin_sport_transfer_ops_u16; + else + drv_data->ops = &bfin_sport_transfer_ops_u8; bfin_write(&drv_data->regs->tcr2, bits_per_word - 1); bfin_write(&drv_data->regs->tfsdiv, bits_per_word - 1); bfin_write(&drv_data->regs->rcr2, bits_per_word - 1); @@ -597,11 +598,12 @@ bfin_sport_spi_setup(struct spi_device *spi) } chip->cs_chg_udelay = chip_info->cs_chg_udelay; chip->idle_tx_val = chip_info->idle_tx_val; - spi->bits_per_word = chip_info->bits_per_word; } } - if (spi->bits_per_word != 8 && spi->bits_per_word != 16) { + if (spi->bits_per_word % 8) { + dev_err(&spi->dev, "%d bits_per_word is not supported\n", + spi->bits_per_word); ret = -EINVAL; goto error; } -- cgit v1.2.3-18-g5258 From 128465ca7c0775609b1c24f66cd6bddac5f59c9b Mon Sep 17 00:00:00 2001 From: Scott Jiang Date: Mon, 23 Apr 2012 18:18:12 -0400 Subject: spi/spi-bfin5xx: fix reversed if condition in interrupt mode This condition is used to determine 8 bits or 16 and 32 bits transfer. Obviously it is reversed. Signed-off-by: Scott Jiang Signed-off-by: Grant Likely --- drivers/spi/spi-bfin5xx.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/spi/spi-bfin5xx.c b/drivers/spi/spi-bfin5xx.c index c0cdcb7c813..432d0190e6b 100644 --- a/drivers/spi/spi-bfin5xx.c +++ b/drivers/spi/spi-bfin5xx.c @@ -396,7 +396,7 @@ static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id) /* last read */ if (drv_data->rx) { dev_dbg(&drv_data->pdev->dev, "last read\n"); - if (n_bytes % 2) { + if (!(n_bytes % 2)) { u16 *buf = (u16 *)drv_data->rx; for (loop = 0; loop < n_bytes / 2; loop++) *buf++ = bfin_read(&drv_data->regs->rdbr); @@ -424,7 +424,7 @@ static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id) if (drv_data->rx && drv_data->tx) { /* duplex */ dev_dbg(&drv_data->pdev->dev, "duplex: write_TDBR\n"); - if (n_bytes % 2) { + if (!(n_bytes % 2)) { u16 *buf = (u16 *)drv_data->rx; u16 *buf2 = (u16 *)drv_data->tx; for (loop = 0; loop < n_bytes / 2; loop++) { @@ -442,7 +442,7 @@ static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id) } else if (drv_data->rx) { /* read */ dev_dbg(&drv_data->pdev->dev, "read: write_TDBR\n"); - if (n_bytes % 2) { + if (!(n_bytes % 2)) { u16 *buf = (u16 *)drv_data->rx; for (loop = 0; loop < n_bytes / 2; loop++) { *buf++ = bfin_read(&drv_data->regs->rdbr); @@ -458,7 +458,7 @@ static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id) } else if (drv_data->tx) { /* write */ dev_dbg(&drv_data->pdev->dev, "write: write_TDBR\n"); - if (n_bytes % 2) { + if (!(n_bytes % 2)) { u16 *buf = (u16 *)drv_data->tx; for (loop = 0; loop < n_bytes / 2; loop++) { bfin_read(&drv_data->regs->rdbr); -- cgit v1.2.3-18-g5258 From 2431a8154634027ce3915200699f26fb3725a1f2 Mon Sep 17 00:00:00 2001 From: Scott Jiang Date: Mon, 23 Apr 2012 18:18:13 -0400 Subject: spi/spi-bfin5xx: Fix flush of last bit after each spi transfer This patch ensures that the last bit of a transfer gets correctly flushed out of the register. Signed-off-by: Scott Jiang Signed-off-by: Grant Likely --- drivers/spi/spi-bfin5xx.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-bfin5xx.c b/drivers/spi/spi-bfin5xx.c index 432d0190e6b..9bb4d4af854 100644 --- a/drivers/spi/spi-bfin5xx.c +++ b/drivers/spi/spi-bfin5xx.c @@ -587,6 +587,7 @@ static void bfin_spi_pump_transfers(unsigned long data) if (message->state == DONE_STATE) { dev_dbg(&drv_data->pdev->dev, "transfer: all done!\n"); message->status = 0; + bfin_spi_flush(drv_data); bfin_spi_giveback(drv_data); return; } @@ -870,8 +871,10 @@ static void bfin_spi_pump_transfers(unsigned long data) message->actual_length += drv_data->len_in_bytes; /* Move to next transfer of this msg */ message->state = bfin_spi_next_transfer(drv_data); - if (drv_data->cs_change) + if (drv_data->cs_change && message->state != DONE_STATE) { + bfin_spi_flush(drv_data); bfin_spi_cs_deactive(drv_data, chip); + } } /* Schedule next transfer tasklet */ -- cgit v1.2.3-18-g5258 From fede766f28dd766d4e8feb321fdb19edb21ef6fb Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Fri, 27 Apr 2012 14:23:22 -0400 Subject: Btrfs: avoid deadlocks from GFP_KERNEL allocations during btrfs_real_readdir Btrfs has an optimization where it will preallocate dentries during readdir to fill in enough information to open the inode without an extra lookup. But, we're calling d_alloc, which is doing GFP_KERNEL allocations, and that leads to deadlocks because our readdir code has tree locks held. For now, disable this optimization. We'll fix the gfp mask in the next merge window. Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 30 +----------------------------- 1 file changed, 1 insertion(+), 29 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index d953f882046..3ce7805d111 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -4192,7 +4192,6 @@ static int btrfs_real_readdir(struct file *filp, void *dirent, struct btrfs_path *path; struct list_head ins_list; struct list_head del_list; - struct qstr q; int ret; struct extent_buffer *leaf; int slot; @@ -4283,7 +4282,6 @@ static int btrfs_real_readdir(struct file *filp, void *dirent, while (di_cur < di_total) { struct btrfs_key location; - struct dentry *tmp; if (verify_dir_item(root, leaf, di)) break; @@ -4304,33 +4302,7 @@ static int btrfs_real_readdir(struct file *filp, void *dirent, d_type = btrfs_filetype_table[btrfs_dir_type(leaf, di)]; btrfs_dir_item_key_to_cpu(leaf, di, &location); - q.name = name_ptr; - q.len = name_len; - q.hash = full_name_hash(q.name, q.len); - tmp = d_lookup(filp->f_dentry, &q); - if (!tmp) { - struct btrfs_key *newkey; - - newkey = kzalloc(sizeof(struct btrfs_key), - GFP_NOFS); - if (!newkey) - goto no_dentry; - tmp = d_alloc(filp->f_dentry, &q); - if (!tmp) { - kfree(newkey); - dput(tmp); - goto no_dentry; - } - memcpy(newkey, &location, - sizeof(struct btrfs_key)); - tmp->d_fsdata = newkey; - tmp->d_flags |= DCACHE_NEED_LOOKUP; - d_rehash(tmp); - dput(tmp); - } else { - dput(tmp); - } -no_dentry: + /* is this a reference to our own snapshot? If so * skip it. * -- cgit v1.2.3-18-g5258 From dc7fdde39e4962b1a88741f7eba2a6b3be1285d8 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Fri, 27 Apr 2012 14:31:29 -0400 Subject: Btrfs: reduce lock contention during extent insertion We're spending huge amounts of time on lock contention during end_io processing because we unconditionally assume we are overwriting an existing extent in the file for each IO. This checks to see if we are outside i_size, and if so, it uses a less expensive readonly search of the btree to look for existing extents. Signed-off-by: Chris Mason --- fs/btrfs/file.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index d83260d7498..53bf2d764bb 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -567,6 +567,7 @@ int btrfs_drop_extents(struct btrfs_trans_handle *trans, struct inode *inode, int extent_type; int recow; int ret; + int modify_tree = -1; if (drop_cache) btrfs_drop_extent_cache(inode, start, end - 1, 0); @@ -575,10 +576,13 @@ int btrfs_drop_extents(struct btrfs_trans_handle *trans, struct inode *inode, if (!path) return -ENOMEM; + if (start >= BTRFS_I(inode)->disk_i_size) + modify_tree = 0; + while (1) { recow = 0; ret = btrfs_lookup_file_extent(trans, root, path, ino, - search_start, -1); + search_start, modify_tree); if (ret < 0) break; if (ret > 0 && path->slots[0] > 0 && search_start == start) { @@ -634,7 +638,8 @@ next_slot: } search_start = max(key.offset, start); - if (recow) { + if (recow || !modify_tree) { + modify_tree = -1; btrfs_release_path(path); continue; } -- cgit v1.2.3-18-g5258 From 7eb7ce4d2e8991aff4ecb71a81949a907ca755ac Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Thu, 26 Apr 2012 19:44:06 +0100 Subject: xen: correctly check for pending events when restoring irq flags In xen_restore_fl_direct(), xen_force_evtchn_callback() was being called even if no events were pending. This resulted in (depending on workload) about a 100 times as many xen_version hypercalls as necessary. Fix this by correcting the sense of the conditional jump. This seems to give a significant performance benefit for some workloads. There is some subtle tricksy "..since the check here is trying to check both pending and masked in a single cmpw, but I think this is correct. It will call check_events now only when the combined mask+pending word is 0x0001 (aka unmasked, pending)." (Ian) CC: stable@kernel.org Acked-by: Ian Campbell Signed-off-by: David Vrabel Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/xen-asm.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/xen/xen-asm.S b/arch/x86/xen/xen-asm.S index 79d7362ad6d..3e45aa00071 100644 --- a/arch/x86/xen/xen-asm.S +++ b/arch/x86/xen/xen-asm.S @@ -96,7 +96,7 @@ ENTRY(xen_restore_fl_direct) /* check for unmasked and pending */ cmpw $0x0001, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_pending - jz 1f + jnz 1f 2: call check_events 1: ENDPATCH(xen_restore_fl_direct) -- cgit v1.2.3-18-g5258 From 700698e7c303f5095107c62a81872c2c3dad1702 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 27 Apr 2012 17:18:59 -0400 Subject: drm/radeon/kms: need to set up ss on DP bridges as well Makes Nutmeg DP to VGA bridges work for me. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=42490 Noticed by Jerome Glisse (after weeks of debugging). Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index c5c31e091a9..af1054f8202 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -958,8 +958,8 @@ static void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode break; } - if (radeon_encoder->active_device & - (ATOM_DEVICE_LCD_SUPPORT | ATOM_DEVICE_DFP_SUPPORT)) { + if ((radeon_encoder->active_device & (ATOM_DEVICE_LCD_SUPPORT | ATOM_DEVICE_DFP_SUPPORT)) || + (radeon_encoder_get_dp_bridge_encoder_id(encoder) != ENCODER_OBJECT_ID_NONE)) { struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; struct drm_connector *connector = radeon_get_connector_for_encoder(encoder); -- cgit v1.2.3-18-g5258 From 3a69ddd6f872180b6f61fda87152b37202118fbc Mon Sep 17 00:00:00 2001 From: Kenneth Graunke Date: Fri, 27 Apr 2012 12:44:41 -0700 Subject: drm/i915: Set the Stencil Cache eviction policy to non-LRA mode. Clearing bit 5 of CACHE_MODE_0 is necessary to prevent GPU hangs in OpenGL programs such as Google MapsGL, Google Earth, and gzdoom when using separate stencil buffers. Without it, the GPU tries to use the LRA eviction policy, which isn't supported. This was supposed to be off by default, but seems to be on for many machines. This cannot be done in gen6_init_clock_gating with most of the other workaround bits; the render ring needs to exist. Otherwise, the register write gets dropped on the floor (one printk will show it changed, but a second printk immediately following shows the value reverts to the old one). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47535 Cc: stable@vger.kernel.org Cc: Rob Castle Cc: Eric Appleman Cc: aaron667@gmx.net Cc: Keith Packard Signed-off-by: Kenneth Graunke Reviewed-by: Daniel Vetter Acked-by: Daniel Vetter Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_ringbuffer.c | 8 ++++++++ 2 files changed, 9 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index b4bb1ef77dd..9d24d65f0c3 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -568,6 +568,7 @@ #define CM0_MASK_SHIFT 16 #define CM0_IZ_OPT_DISABLE (1<<6) #define CM0_ZR_OPT_DISABLE (1<<5) +#define CM0_STC_EVICT_DISABLE_LRA_SNB (1<<5) #define CM0_DEPTH_EVICT_DISABLE (1<<4) #define CM0_COLOR_EVICT_DISABLE (1<<3) #define CM0_DEPTH_WRITE_DISABLE (1<<1) diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index f75806e5bff..80fce51e2f4 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -401,6 +401,14 @@ static int init_render_ring(struct intel_ring_buffer *ring) if (INTEL_INFO(dev)->gen >= 6) { I915_WRITE(INSTPM, INSTPM_FORCE_ORDERING << 16 | INSTPM_FORCE_ORDERING); + + /* From the Sandybridge PRM, volume 1 part 3, page 24: + * "If this bit is set, STCunit will have LRA as replacement + * policy. [...] This bit must be reset. LRA replacement + * policy is not supported." + */ + I915_WRITE(CACHE_MODE_0, + CM0_STC_EVICT_DISABLE_LRA_SNB << CM0_MASK_SHIFT); } return ret; -- cgit v1.2.3-18-g5258 From fcbf94b9dedd2ce08e798a99aafc94fec8668161 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 28 Apr 2012 08:29:56 -0700 Subject: Revert "autofs: work around unhappy compat problem on x86-64" This reverts commit a32744d4abae24572eff7269bc17895c41bd0085. While that commit was technically the right thing to do, and made the x86-64 compat mode work identically to native 32-bit mode (and thus fixing the problem with a 32-bit systemd install on a 64-bit kernel), it turns out that the automount binaries had workarounds for this compat problem. Now, the workarounds are disgusting: doing an "uname()" to find out the architecture of the kernel, and then comparing it for the 64-bit cases and fixing up the size of the read() in automount for those. And they were confused: it's not actually a generic 64-bit issue at all, it's very much tied to just x86-64, which has different alignment for an 'u64' in 64-bit mode than in 32-bit mode. But the end result is that fixing the compat layer actually breaks the case of a 32-bit automount on a x86-64 kernel. There are various approaches to fix this (including just doing a "strcmp()" on current->comm and comparing it to "automount"), but I think that I will do the one that teaches pipes about a special "packet mode", which will allow user space to not have to care too deeply about the padding at the end of the autofs packet. That change will make the compat workaround unnecessary, so let's revert it first, and get automount working again in compat mode. The packetized pipes will then fix autofs for systemd. Reported-and-requested-by: Michael Tokarev Cc: Ian Kent Cc: stable@kernel.org # for 3.3 Signed-off-by: Linus Torvalds --- fs/autofs4/autofs_i.h | 1 - fs/autofs4/dev-ioctl.c | 1 - fs/autofs4/inode.c | 2 -- fs/autofs4/waitq.c | 22 +++------------------- 4 files changed, 3 insertions(+), 23 deletions(-) diff --git a/fs/autofs4/autofs_i.h b/fs/autofs4/autofs_i.h index eb1cc92cd67..d8d8e7ba6a1 100644 --- a/fs/autofs4/autofs_i.h +++ b/fs/autofs4/autofs_i.h @@ -110,7 +110,6 @@ struct autofs_sb_info { int sub_version; int min_proto; int max_proto; - int compat_daemon; unsigned long exp_timeout; unsigned int type; int reghost_enabled; diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c index 9dacb858670..3dfd615afb6 100644 --- a/fs/autofs4/dev-ioctl.c +++ b/fs/autofs4/dev-ioctl.c @@ -385,7 +385,6 @@ static int autofs_dev_ioctl_setpipefd(struct file *fp, sbi->pipefd = pipefd; sbi->pipe = pipe; sbi->catatonic = 0; - sbi->compat_daemon = is_compat_task(); } out: mutex_unlock(&sbi->wq_mutex); diff --git a/fs/autofs4/inode.c b/fs/autofs4/inode.c index d8dc002e9cc..14c7bc02349 100644 --- a/fs/autofs4/inode.c +++ b/fs/autofs4/inode.c @@ -19,7 +19,6 @@ #include #include #include -#include #include "autofs_i.h" #include @@ -225,7 +224,6 @@ int autofs4_fill_super(struct super_block *s, void *data, int silent) set_autofs_type_indirect(&sbi->type); sbi->min_proto = 0; sbi->max_proto = 0; - sbi->compat_daemon = is_compat_task(); mutex_init(&sbi->wq_mutex); mutex_init(&sbi->pipe_mutex); spin_lock_init(&sbi->fs_lock); diff --git a/fs/autofs4/waitq.c b/fs/autofs4/waitq.c index 9c098db4334..da8876d38a7 100644 --- a/fs/autofs4/waitq.c +++ b/fs/autofs4/waitq.c @@ -91,24 +91,7 @@ static int autofs4_write(struct autofs_sb_info *sbi, return (bytes > 0); } - -/* - * The autofs_v5 packet was misdesigned. - * - * The packets are identical on x86-32 and x86-64, but have different - * alignment. Which means that 'sizeof()' will give different results. - * Fix it up for the case of running 32-bit user mode on a 64-bit kernel. - */ -static noinline size_t autofs_v5_packet_size(struct autofs_sb_info *sbi) -{ - size_t pktsz = sizeof(struct autofs_v5_packet); -#if defined(CONFIG_X86_64) && defined(CONFIG_COMPAT) - if (sbi->compat_daemon > 0) - pktsz -= 4; -#endif - return pktsz; -} - + static void autofs4_notify_daemon(struct autofs_sb_info *sbi, struct autofs_wait_queue *wq, int type) @@ -172,7 +155,8 @@ static void autofs4_notify_daemon(struct autofs_sb_info *sbi, { struct autofs_v5_packet *packet = &pkt.v5_pkt.v5_packet; - pktsz = autofs_v5_packet_size(sbi); + pktsz = sizeof(*packet); + packet->wait_queue_token = wq->wait_queue_token; packet->len = wq->name.len; memcpy(packet->name, wq->name.name, wq->name.len); -- cgit v1.2.3-18-g5258 From 9883035ae7edef3ec62ad215611cb8e17d6a1a5d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 29 Apr 2012 13:12:42 -0700 Subject: pipes: add a "packetized pipe" mode for writing The actual internal pipe implementation is already really about individual packets (called "pipe buffers"), and this simply exposes that as a special packetized mode. When we are in the packetized mode (marked by O_DIRECT as suggested by Alan Cox), a write() on a pipe will not merge the new data with previous writes, so each write will get a pipe buffer of its own. The pipe buffer is then marked with the PIPE_BUF_FLAG_PACKET flag, which in turn will tell the reader side to break the read at that boundary (and throw away any partial packet contents that do not fit in the read buffer). End result: as long as you do writes less than PIPE_BUF in size (so that the pipe doesn't have to split them up), you can now treat the pipe as a packet interface, where each read() system call will read one packet at a time. You can just use a sufficiently big read buffer (PIPE_BUF is sufficient, since bigger than that doesn't guarantee atomicity anyway), and the return value of the read() will naturally give you the size of the packet. NOTE! We do not support zero-sized packets, and zero-sized reads and writes to a pipe continue to be no-ops. Also note that big packets will currently be split at write time, but that the size at which that happens is not really specified (except that it's bigger than PIPE_BUF). Currently that limit is the system page size, but we might want to explicitly support bigger packets some day. The main user for this is going to be the autofs packet interface, allowing us to stop having to care so deeply about exact packet sizes (which have had bugs with 32/64-bit compatibility modes). But user space can create packetized pipes with "pipe2(fd, O_DIRECT)", which will fail with an EINVAL on kernels that do not support this interface. Tested-by: Michael Tokarev Cc: Alan Cox Cc: David Miller Cc: Ian Kent Cc: Thomas Meyer Cc: stable@kernel.org # needed for systemd/autofs interaction fix Signed-off-by: Linus Torvalds --- fs/pipe.c | 31 +++++++++++++++++++++++++++++-- include/linux/pipe_fs_i.h | 1 + 2 files changed, 30 insertions(+), 2 deletions(-) diff --git a/fs/pipe.c b/fs/pipe.c index 25feaa3faac..fec5e4ad071 100644 --- a/fs/pipe.c +++ b/fs/pipe.c @@ -346,6 +346,16 @@ static const struct pipe_buf_operations anon_pipe_buf_ops = { .get = generic_pipe_buf_get, }; +static const struct pipe_buf_operations packet_pipe_buf_ops = { + .can_merge = 0, + .map = generic_pipe_buf_map, + .unmap = generic_pipe_buf_unmap, + .confirm = generic_pipe_buf_confirm, + .release = anon_pipe_buf_release, + .steal = generic_pipe_buf_steal, + .get = generic_pipe_buf_get, +}; + static ssize_t pipe_read(struct kiocb *iocb, const struct iovec *_iov, unsigned long nr_segs, loff_t pos) @@ -407,6 +417,13 @@ redo: ret += chars; buf->offset += chars; buf->len -= chars; + + /* Was it a packet buffer? Clean up and exit */ + if (buf->flags & PIPE_BUF_FLAG_PACKET) { + total_len = chars; + buf->len = 0; + } + if (!buf->len) { buf->ops = NULL; ops->release(pipe, buf); @@ -459,6 +476,11 @@ redo: return ret; } +static inline int is_packetized(struct file *file) +{ + return (file->f_flags & O_DIRECT) != 0; +} + static ssize_t pipe_write(struct kiocb *iocb, const struct iovec *_iov, unsigned long nr_segs, loff_t ppos) @@ -593,6 +615,11 @@ redo2: buf->ops = &anon_pipe_buf_ops; buf->offset = 0; buf->len = chars; + buf->flags = 0; + if (is_packetized(filp)) { + buf->ops = &packet_pipe_buf_ops; + buf->flags = PIPE_BUF_FLAG_PACKET; + } pipe->nrbufs = ++bufs; pipe->tmp_page = NULL; @@ -1013,7 +1040,7 @@ struct file *create_write_pipe(int flags) goto err_dentry; f->f_mapping = inode->i_mapping; - f->f_flags = O_WRONLY | (flags & O_NONBLOCK); + f->f_flags = O_WRONLY | (flags & (O_NONBLOCK | O_DIRECT)); f->f_version = 0; return f; @@ -1057,7 +1084,7 @@ int do_pipe_flags(int *fd, int flags) int error; int fdw, fdr; - if (flags & ~(O_CLOEXEC | O_NONBLOCK)) + if (flags & ~(O_CLOEXEC | O_NONBLOCK | O_DIRECT)) return -EINVAL; fw = create_write_pipe(flags); diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h index 6d626ff0cfd..e1ac1ce16fb 100644 --- a/include/linux/pipe_fs_i.h +++ b/include/linux/pipe_fs_i.h @@ -6,6 +6,7 @@ #define PIPE_BUF_FLAG_LRU 0x01 /* page is on the LRU */ #define PIPE_BUF_FLAG_ATOMIC 0x02 /* was atomically mapped */ #define PIPE_BUF_FLAG_GIFT 0x04 /* page is a gift */ +#define PIPE_BUF_FLAG_PACKET 0x08 /* read() as a packet */ /** * struct pipe_buffer - a linux kernel pipe buffer -- cgit v1.2.3-18-g5258 From 26e0f90fded422f309deb6169dfbccb204435698 Mon Sep 17 00:00:00 2001 From: Marcos Paulo de Souza Date: Sun, 29 Apr 2012 22:29:30 +0200 Subject: PM / Freezer / Docs: Update documentation about freezing of tasks The file Documentation/power/freezing-of-tasks.txt was still referencing the TIF_FREEZE flag, that was removed by the commit d88e4cb67197d007fb778d62fe17360e970d5bfa(freezer: remove now unused TIF_FREEZE). This patch removes all the references of TIF_FREEZE that were left behind. Signed-off-by: Marcos Paulo de Souza Signed-off-by: Srivatsa S. Bhat Signed-off-by: Rafael J. Wysocki --- Documentation/power/freezing-of-tasks.txt | 37 ++++++++++++++++--------------- 1 file changed, 19 insertions(+), 18 deletions(-) diff --git a/Documentation/power/freezing-of-tasks.txt b/Documentation/power/freezing-of-tasks.txt index ec715cd78fb..6ec291ea1c7 100644 --- a/Documentation/power/freezing-of-tasks.txt +++ b/Documentation/power/freezing-of-tasks.txt @@ -9,7 +9,7 @@ architectures). II. How does it work? -There are four per-task flags used for that, PF_NOFREEZE, PF_FROZEN, TIF_FREEZE +There are three per-task flags used for that, PF_NOFREEZE, PF_FROZEN and PF_FREEZER_SKIP (the last one is auxiliary). The tasks that have PF_NOFREEZE unset (all user space processes and some kernel threads) are regarded as 'freezable' and treated in a special way before the system enters a @@ -17,30 +17,31 @@ suspend state as well as before a hibernation image is created (in what follows we only consider hibernation, but the description also applies to suspend). Namely, as the first step of the hibernation procedure the function -freeze_processes() (defined in kernel/power/process.c) is called. It executes -try_to_freeze_tasks() that sets TIF_FREEZE for all of the freezable tasks and -either wakes them up, if they are kernel threads, or sends fake signals to them, -if they are user space processes. A task that has TIF_FREEZE set, should react -to it by calling the function called __refrigerator() (defined in -kernel/freezer.c), which sets the task's PF_FROZEN flag, changes its state -to TASK_UNINTERRUPTIBLE and makes it loop until PF_FROZEN is cleared for it. -Then, we say that the task is 'frozen' and therefore the set of functions -handling this mechanism is referred to as 'the freezer' (these functions are -defined in kernel/power/process.c, kernel/freezer.c & include/linux/freezer.h). -User space processes are generally frozen before kernel threads. +freeze_processes() (defined in kernel/power/process.c) is called. A system-wide +variable system_freezing_cnt (as opposed to a per-task flag) is used to indicate +whether the system is to undergo a freezing operation. And freeze_processes() +sets this variable. After this, it executes try_to_freeze_tasks() that sends a +fake signal to all user space processes, and wakes up all the kernel threads. +All freezable tasks must react to that by calling try_to_freeze(), which +results in a call to __refrigerator() (defined in kernel/freezer.c), which sets +the task's PF_FROZEN flag, changes its state to TASK_UNINTERRUPTIBLE and makes +it loop until PF_FROZEN is cleared for it. Then, we say that the task is +'frozen' and therefore the set of functions handling this mechanism is referred +to as 'the freezer' (these functions are defined in kernel/power/process.c, +kernel/freezer.c & include/linux/freezer.h). User space processes are generally +frozen before kernel threads. __refrigerator() must not be called directly. Instead, use the try_to_freeze() function (defined in include/linux/freezer.h), that checks -the task's TIF_FREEZE flag and makes the task enter __refrigerator() if the -flag is set. +if the task is to be frozen and makes the task enter __refrigerator(). For user space processes try_to_freeze() is called automatically from the signal-handling code, but the freezable kernel threads need to call it explicitly in suitable places or use the wait_event_freezable() or wait_event_freezable_timeout() macros (defined in include/linux/freezer.h) -that combine interruptible sleep with checking if TIF_FREEZE is set and calling -try_to_freeze(). The main loop of a freezable kernel thread may look like the -following one: +that combine interruptible sleep with checking if the task is to be frozen and +calling try_to_freeze(). The main loop of a freezable kernel thread may look +like the following one: set_freezable(); do { @@ -53,7 +54,7 @@ following one: (from drivers/usb/core/hub.c::hub_thread()). If a freezable kernel thread fails to call try_to_freeze() after the freezer has -set TIF_FREEZE for it, the freezing of tasks will fail and the entire +initiated a freezing operation, the freezing of tasks will fail and the entire hibernation operation will be cancelled. For this reason, freezable kernel threads must call try_to_freeze() somewhere or use one of the wait_event_freezable() and wait_event_freezable_timeout() macros. -- cgit v1.2.3-18-g5258 From 64f371bc3107e69efce563a3d0f0e6880de0d537 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 29 Apr 2012 13:30:08 -0700 Subject: autofs: make the autofsv5 packet file descriptor use a packetized pipe The autofs packet size has had a very unfortunate size problem on x86: because the alignment of 'u64' differs in 32-bit and 64-bit modes, and because the packet data was not 8-byte aligned, the size of the autofsv5 packet structure differed between 32-bit and 64-bit modes despite looking otherwise identical (300 vs 304 bytes respectively). We first fixed that up by making the 64-bit compat mode know about this problem in commit a32744d4abae ("autofs: work around unhappy compat problem on x86-64"), and that made a 32-bit 'systemd' work happily on a 64-bit kernel because everything then worked the same way as on a 32-bit kernel. But it turned out that 'automount' had actually known and worked around this problem in user space, so fixing the kernel to do the proper 32-bit compatibility handling actually *broke* 32-bit automount on a 64-bit kernel, because it knew that the packet sizes were wrong and expected those incorrect sizes. As a result, we ended up reverting that compatibility mode fix, and thus breaking systemd again, in commit fcbf94b9dedd. With both automount and systemd doing a single read() system call, and verifying that they get *exactly* the size they expect but using different sizes, it seemed that fixing one of them inevitably seemed to break the other. At one point, a patch I seriously considered applying from Michael Tokarev did a "strcmp()" to see if it was automount that was doing the operation. Ugly, ugly. However, a prettier solution exists now thanks to the packetized pipe mode. By marking the communication pipe as being packetized (by simply setting the O_DIRECT flag), we can always just write the bigger packet size, and if user-space does a smaller read, it will just get that partial end result and the extra alignment padding will simply be thrown away. This makes both automount and systemd happy, since they now get the size they asked for, and the kernel side of autofs simply no longer needs to care - it could pad out the packet arbitrarily. Of course, if there is some *other* user of autofs (please, please, please tell me it ain't so - and we haven't heard of any) that tries to read the packets with multiple writes, that other user will now be broken - the whole point of the packetized mode is that one system call gets exactly one packet, and you cannot read a packet in pieces. Tested-by: Michael Tokarev Cc: Alan Cox Cc: David Miller Cc: Ian Kent Cc: Thomas Meyer Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- fs/autofs4/autofs_i.h | 11 +++++++++++ fs/autofs4/dev-ioctl.c | 2 +- fs/autofs4/inode.c | 2 +- 3 files changed, 13 insertions(+), 2 deletions(-) diff --git a/fs/autofs4/autofs_i.h b/fs/autofs4/autofs_i.h index d8d8e7ba6a1..908e1845541 100644 --- a/fs/autofs4/autofs_i.h +++ b/fs/autofs4/autofs_i.h @@ -269,6 +269,17 @@ int autofs4_fill_super(struct super_block *, void *, int); struct autofs_info *autofs4_new_ino(struct autofs_sb_info *); void autofs4_clean_ino(struct autofs_info *); +static inline int autofs_prepare_pipe(struct file *pipe) +{ + if (!pipe->f_op || !pipe->f_op->write) + return -EINVAL; + if (!S_ISFIFO(pipe->f_dentry->d_inode->i_mode)) + return -EINVAL; + /* We want a packet pipe */ + pipe->f_flags |= O_DIRECT; + return 0; +} + /* Queue management functions */ int autofs4_wait(struct autofs_sb_info *,struct dentry *, enum autofs_notify); diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c index 3dfd615afb6..aa9103f8f01 100644 --- a/fs/autofs4/dev-ioctl.c +++ b/fs/autofs4/dev-ioctl.c @@ -376,7 +376,7 @@ static int autofs_dev_ioctl_setpipefd(struct file *fp, err = -EBADF; goto out; } - if (!pipe->f_op || !pipe->f_op->write) { + if (autofs_prepare_pipe(pipe) < 0) { err = -EPIPE; fput(pipe); goto out; diff --git a/fs/autofs4/inode.c b/fs/autofs4/inode.c index 14c7bc02349..6e488ebe778 100644 --- a/fs/autofs4/inode.c +++ b/fs/autofs4/inode.c @@ -290,7 +290,7 @@ int autofs4_fill_super(struct super_block *s, void *data, int silent) printk("autofs: could not open pipe file descriptor\n"); goto fail_dput; } - if (!pipe->f_op || !pipe->f_op->write) + if (autofs_prepare_pipe(pipe) < 0) goto fail_fput; sbi->pipe = pipe; sbi->pipefd = pipefd; -- cgit v1.2.3-18-g5258 From 69964ea4c7b68c9399f7977aa5b9aa6539a6a98a Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 29 Apr 2012 15:19:10 -0700 Subject: Linux 3.4-rc5 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index afc868e6c75..a06ee9fa802 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 4 SUBLEVEL = 0 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Saber-toothed Squirrel # *DOCUMENTATION* -- cgit v1.2.3-18-g5258 From a2aa65a332b46c4e95f1226b567ff5e68bdfceac Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Wed, 2 May 2012 19:31:20 +0800 Subject: ARM: imx: enable pinctrl dummy states Enable pinctrl dummy states for imx platforms without pinctrl support. Acked-by: Stephen Warren Signed-off-by: Dong Aisheng Signed-off-by: Shawn Guo --- arch/arm/mach-imx/imx51-dt.c | 3 +++ arch/arm/mach-imx/imx53-dt.c | 3 +++ arch/arm/mach-imx/mach-imx6q.c | 7 +++++++ arch/arm/mach-imx/mm-imx1.c | 2 ++ arch/arm/mach-imx/mm-imx21.c | 2 ++ arch/arm/mach-imx/mm-imx25.c | 2 ++ arch/arm/mach-imx/mm-imx27.c | 2 ++ arch/arm/mach-imx/mm-imx3.c | 2 ++ arch/arm/mach-imx/mm-imx5.c | 2 ++ 9 files changed, 25 insertions(+) diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c index 5cca573964f..5f577fbda2c 100644 --- a/arch/arm/mach-imx/imx51-dt.c +++ b/arch/arm/mach-imx/imx51-dt.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -81,6 +82,8 @@ static void __init imx51_dt_init(void) of_irq_init(imx51_irq_match); + pinctrl_provide_dummies(); + node = of_find_matching_node(NULL, imx51_iomuxc_of_match); if (node) { of_id = of_match_node(imx51_iomuxc_of_match, node); diff --git a/arch/arm/mach-imx/imx53-dt.c b/arch/arm/mach-imx/imx53-dt.c index 4172279b390..574eca4b89a 100644 --- a/arch/arm/mach-imx/imx53-dt.c +++ b/arch/arm/mach-imx/imx53-dt.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -88,6 +89,8 @@ static void __init imx53_dt_init(void) of_irq_init(imx53_irq_match); + pinctrl_provide_dummies(); + node = of_find_matching_node(NULL, imx53_iomuxc_of_match); if (node) { of_id = of_match_node(imx53_iomuxc_of_match, node); diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index da6c1d9af76..3df360a52c1 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -77,6 +78,12 @@ static int ksz9021rn_phy_fixup(struct phy_device *phydev) static void __init imx6q_init_machine(void) { + /* + * This should be removed when all imx6q boards have pinctrl + * states for devices defined in device tree. + */ + pinctrl_provide_dummies(); + if (of_machine_is_compatible("fsl,imx6q-sabrelite")) phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, ksz9021rn_phy_fixup); diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c index 2bded591d5c..fcafd3dafb8 100644 --- a/arch/arm/mach-imx/mm-imx1.c +++ b/arch/arm/mach-imx/mm-imx1.c @@ -18,6 +18,7 @@ #include #include #include +#include #include @@ -58,4 +59,5 @@ void __init imx1_soc_init(void) MX1_GPIO_INT_PORTC, 0); mxc_register_gpio("imx1-gpio", 3, MX1_GPIO4_BASE_ADDR, SZ_256, MX1_GPIO_INT_PORTD, 0); + pinctrl_provide_dummies(); } diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c index 14d540edfd1..5f43905e529 100644 --- a/arch/arm/mach-imx/mm-imx21.c +++ b/arch/arm/mach-imx/mm-imx21.c @@ -20,6 +20,7 @@ #include #include +#include #include #include #include @@ -88,6 +89,7 @@ void __init imx21_soc_init(void) mxc_register_gpio("imx21-gpio", 4, MX21_GPIO5_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + pinctrl_provide_dummies(); imx_add_imx_dma(); platform_device_register_simple("imx21-audmux", 0, imx21_audmux_res, ARRAY_SIZE(imx21_audmux_res)); diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c index 153b457acdc..6ff37140a4f 100644 --- a/arch/arm/mach-imx/mm-imx25.c +++ b/arch/arm/mach-imx/mm-imx25.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -95,6 +96,7 @@ void __init imx25_soc_init(void) mxc_register_gpio("imx31-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0); mxc_register_gpio("imx31-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0); + pinctrl_provide_dummies(); /* i.mx25 has the i.mx35 type sdma */ imx_add_imx_sdma("imx35-sdma", MX25_SDMA_BASE_ADDR, MX25_INT_SDMA, &imx25_sdma_pdata); /* i.mx25 has the i.mx31 type audmux */ diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c index 8cb3f5e3e56..25662558e01 100644 --- a/arch/arm/mach-imx/mm-imx27.c +++ b/arch/arm/mach-imx/mm-imx27.c @@ -20,6 +20,7 @@ #include #include +#include #include #include #include @@ -89,6 +90,7 @@ void __init imx27_soc_init(void) mxc_register_gpio("imx21-gpio", 4, MX27_GPIO5_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + pinctrl_provide_dummies(); imx_add_imx_dma(); /* imx27 has the imx21 type audmux */ platform_device_register_simple("imx21-audmux", 0, imx27_audmux_res, diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index 74127389e7a..9128d15b1eb 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -267,6 +268,7 @@ void __init imx35_soc_init(void) mxc_register_gpio("imx31-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0); mxc_register_gpio("imx31-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0); + pinctrl_provide_dummies(); if (to_version == 1) { strncpy(imx35_sdma_pdata.fw_name, "sdma-imx35-to1.bin", strlen(imx35_sdma_pdata.fw_name)); diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index e10f3914fcf..ba91e6b31cf 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -223,6 +224,7 @@ void __init imx53_soc_init(void) mxc_register_gpio("imx31-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH); mxc_register_gpio("imx31-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH); + pinctrl_provide_dummies(); /* i.mx53 has the i.mx35 type sdma */ imx_add_imx_sdma("imx35-sdma", MX53_SDMA_BASE_ADDR, MX53_INT_SDMA, &imx53_sdma_pdata); -- cgit v1.2.3-18-g5258 From d1654b803f23a77e01ead7ab50ee3fdea931ae5a Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 6 May 2012 22:14:13 +0800 Subject: ARM: mxs: enable pinctrl dummy states The mxs pinctrl driver will only support DT probe. That said, the mxs device drivers can only get pinctrl state from pinctrl subsystem when the drivers get probed from device tree. Before converting the whole mxs platform support over to device tree, we need to enable pinctrl dummy states for those non-DT board files to ensure the pinctrl API adopted by mxs device drivers will work for both DT and non-DT probe. Instead of calling pinctrl_provide_dummies() directly in every board file, the patch introduces soc specific calls mx23_soc_init() and mx28_soc_init() for boards' .init_machine hook to invoke, so that any soc specific setup for non-DT boot only can be added there. Signed-off-by: Shawn Guo --- arch/arm/mach-mxs/include/mach/common.h | 2 ++ arch/arm/mach-mxs/mach-apx4devkit.c | 2 ++ arch/arm/mach-mxs/mach-m28evk.c | 2 ++ arch/arm/mach-mxs/mach-mx23evk.c | 2 ++ arch/arm/mach-mxs/mach-mx28evk.c | 2 ++ arch/arm/mach-mxs/mach-stmp378x_devb.c | 2 ++ arch/arm/mach-mxs/mach-tx28.c | 2 ++ arch/arm/mach-mxs/mm.c | 11 +++++++++++ 8 files changed, 25 insertions(+) diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h index c50c3ea28a9..8d88399b73e 100644 --- a/arch/arm/mach-mxs/include/mach/common.h +++ b/arch/arm/mach-mxs/include/mach/common.h @@ -19,11 +19,13 @@ extern void mxs_timer_init(struct clk *, int); extern void mxs_restart(char, const char *); extern int mxs_saif_clkmux_select(unsigned int clkmux); +extern void mx23_soc_init(void); extern int mx23_register_gpios(void); extern int mx23_clocks_init(void); extern void mx23_map_io(void); extern void mx23_init_irq(void); +extern void mx28_soc_init(void); extern int mx28_register_gpios(void); extern int mx28_clocks_init(void); extern void mx28_map_io(void); diff --git a/arch/arm/mach-mxs/mach-apx4devkit.c b/arch/arm/mach-mxs/mach-apx4devkit.c index 48a7fab571a..5e90b9dcdef 100644 --- a/arch/arm/mach-mxs/mach-apx4devkit.c +++ b/arch/arm/mach-mxs/mach-apx4devkit.c @@ -207,6 +207,8 @@ static int apx4devkit_phy_fixup(struct phy_device *phy) static void __init apx4devkit_init(void) { + mx28_soc_init(); + mxs_iomux_setup_multiple_pads(apx4devkit_pads, ARRAY_SIZE(apx4devkit_pads)); diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c index 06d79963611..4c00c879b89 100644 --- a/arch/arm/mach-mxs/mach-m28evk.c +++ b/arch/arm/mach-mxs/mach-m28evk.c @@ -319,6 +319,8 @@ static struct mxs_mmc_platform_data m28evk_mmc_pdata[] __initdata = { static void __init m28evk_init(void) { + mx28_soc_init(); + mxs_iomux_setup_multiple_pads(m28evk_pads, ARRAY_SIZE(m28evk_pads)); mx28_add_duart(); diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c index 5ea1c57d260..e7272a41939 100644 --- a/arch/arm/mach-mxs/mach-mx23evk.c +++ b/arch/arm/mach-mxs/mach-mx23evk.c @@ -141,6 +141,8 @@ static void __init mx23evk_init(void) { int ret; + mx23_soc_init(); + mxs_iomux_setup_multiple_pads(mx23evk_pads, ARRAY_SIZE(mx23evk_pads)); mx23_add_duart(); diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index e386c142f93..da4610ebe9e 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -413,6 +413,8 @@ static void __init mx28evk_init(void) { int ret; + mx28_soc_init(); + mxs_iomux_setup_multiple_pads(mx28evk_pads, ARRAY_SIZE(mx28evk_pads)); mx28_add_duart(); diff --git a/arch/arm/mach-mxs/mach-stmp378x_devb.c b/arch/arm/mach-mxs/mach-stmp378x_devb.c index a626c07b871..6548965e4a7 100644 --- a/arch/arm/mach-mxs/mach-stmp378x_devb.c +++ b/arch/arm/mach-mxs/mach-stmp378x_devb.c @@ -85,6 +85,8 @@ static void __init stmp378x_dvb_init(void) { int ret; + mx23_soc_init(); + mxs_iomux_setup_multiple_pads(stmp378x_dvb_pads, ARRAY_SIZE(stmp378x_dvb_pads)); diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c index 2c0862e655e..8837029de1a 100644 --- a/arch/arm/mach-mxs/mach-tx28.c +++ b/arch/arm/mach-mxs/mach-tx28.c @@ -146,6 +146,8 @@ static struct mxs_mmc_platform_data tx28_mmc0_pdata __initdata = { static void __init tx28_stk5v3_init(void) { + mx28_soc_init(); + mxs_iomux_setup_multiple_pads(tx28_stk5v3_pads, ARRAY_SIZE(tx28_stk5v3_pads)); diff --git a/arch/arm/mach-mxs/mm.c b/arch/arm/mach-mxs/mm.c index 50af5ceebf6..67a384edcf5 100644 --- a/arch/arm/mach-mxs/mm.c +++ b/arch/arm/mach-mxs/mm.c @@ -13,6 +13,7 @@ #include #include +#include #include @@ -61,3 +62,13 @@ void __init mx28_init_irq(void) { icoll_init_irq(); } + +void __init mx23_soc_init(void) +{ + pinctrl_provide_dummies(); +} + +void __init mx28_soc_init(void) +{ + pinctrl_provide_dummies(); +} -- cgit v1.2.3-18-g5258 From 32329a2cfc2546ad8b7e8b44c395a0031d3e55db Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Wed, 2 May 2012 19:31:21 +0800 Subject: ARM: imx6q: switch to use pinctrl subsystem Acked-by: Stephen Warren Signed-off-by: Dong Aisheng Signed-off-by: Shawn Guo --- arch/arm/mach-imx/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 7561eca131b..e0fc67cf659 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -842,6 +842,8 @@ config SOC_IMX6Q select HAVE_IMX_MMDC select HAVE_IMX_SRC select HAVE_SMP + select PINCTRL + select PINCTRL_IMX6Q select USE_OF help -- cgit v1.2.3-18-g5258 From e62d8b8fe73518d1875371a2ee9c5fdd31eba6f8 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Fri, 11 May 2012 14:56:01 +0800 Subject: mmc: sdhci-imx-esdhc: adopt pinctrl support Cc: linux-mmc@vger.kernel.org Cc: Chris Ball Signed-off-by: Dong Aisheng Signed-off-by: Shawn Guo Acked-by: Stephen Warren --- drivers/mmc/host/sdhci-esdhc-imx.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 8abdaf6697a..d190d04636a 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include "sdhci-pltfm.h" #include "sdhci-esdhc.h" @@ -68,6 +69,7 @@ struct pltfm_imx_data { int flags; u32 scratchpad; enum imx_esdhc_type devtype; + struct pinctrl *pinctrl; struct esdhc_platform_data boarddata; }; @@ -467,6 +469,12 @@ static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev) clk_prepare_enable(clk); pltfm_host->clk = clk; + imx_data->pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(imx_data->pinctrl)) { + err = PTR_ERR(imx_data->pinctrl); + goto pin_err; + } + host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; if (is_imx25_esdhc(imx_data) || is_imx35_esdhc(imx_data)) @@ -558,6 +566,7 @@ no_card_detect_irq: gpio_free(boarddata->wp_gpio); no_card_detect_pin: no_board_data: +pin_err: clk_disable_unprepare(pltfm_host->clk); clk_put(pltfm_host->clk); err_clk_get: -- cgit v1.2.3-18-g5258 From fed78ce4c6af1c0d516ae6f4cdc2bb8dbbca8c22 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 6 May 2012 20:21:05 +0800 Subject: tty: serial: imx: adopt pinctrl support Cc: linux-serial@vger.kernel.org Cc: Greg Kroah-Hartman Signed-off-by: Shawn Guo Acked-by: Dong Aisheng --- drivers/tty/serial/imx.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index e7feceeebc2..ec206732f68 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -47,6 +47,7 @@ #include #include #include +#include #include #include @@ -1464,6 +1465,7 @@ static int serial_imx_probe(struct platform_device *pdev) void __iomem *base; int ret = 0; struct resource *res; + struct pinctrl *pinctrl; sport = kzalloc(sizeof(*sport), GFP_KERNEL); if (!sport) @@ -1503,6 +1505,12 @@ static int serial_imx_probe(struct platform_device *pdev) sport->timer.function = imx_timeout; sport->timer.data = (unsigned long)sport; + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) { + ret = PTR_ERR(pinctrl); + goto unmap; + } + sport->clk = clk_get(&pdev->dev, "uart"); if (IS_ERR(sport->clk)) { ret = PTR_ERR(sport->clk); -- cgit v1.2.3-18-g5258 From b2bccee1793ebcf47272fc6556e741a9fba896c7 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 6 May 2012 20:24:04 +0800 Subject: net: fec: adopt pinctrl support Cc: netdev@vger.kernel.org Signed-off-by: Shawn Guo Acked-by: Dong Aisheng Acked-by: David S. Miller --- drivers/net/ethernet/freescale/fec.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c index a12b3f5bc02..500c106af86 100644 --- a/drivers/net/ethernet/freescale/fec.c +++ b/drivers/net/ethernet/freescale/fec.c @@ -48,6 +48,7 @@ #include #include #include +#include #include @@ -1542,6 +1543,7 @@ fec_probe(struct platform_device *pdev) struct resource *r; const struct of_device_id *of_id; static int dev_id; + struct pinctrl *pinctrl; of_id = of_match_device(fec_dt_ids, &pdev->dev); if (of_id) @@ -1609,6 +1611,12 @@ fec_probe(struct platform_device *pdev) } } + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) { + ret = PTR_ERR(pinctrl); + goto failed_pin; + } + fep->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(fep->clk)) { ret = PTR_ERR(fep->clk); @@ -1639,6 +1647,7 @@ failed_mii_init: failed_init: clk_disable_unprepare(fep->clk); clk_put(fep->clk); +failed_pin: failed_clk: for (i = 0; i < FEC_IRQ_NUM; i++) { irq = platform_get_irq(pdev, i); -- cgit v1.2.3-18-g5258 From a53157c21c699c392921e243fa96abc27722f910 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 6 May 2012 20:25:13 +0800 Subject: can: flexcan: adopt pinctrl support Cc: linux-can@vger.kernel.org Signed-off-by: Shawn Guo Acked-by: Marc Kleine-Budde Acked-by: Dong Aisheng --- drivers/net/can/flexcan.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 1efb08386c6..38c0690df5c 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -35,6 +35,7 @@ #include #include #include +#include #define DRV_NAME "flexcan" @@ -927,11 +928,16 @@ static int __devinit flexcan_probe(struct platform_device *pdev) struct flexcan_priv *priv; struct resource *mem; struct clk *clk = NULL; + struct pinctrl *pinctrl; void __iomem *base; resource_size_t mem_size; int err, irq; u32 clock_freq = 0; + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) + return PTR_ERR(pinctrl); + if (pdev->dev.of_node) { const u32 *clock_freq_p; -- cgit v1.2.3-18-g5258 From 15afbc68780f8c06c5b5590adcbf7534ee1920b3 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 6 May 2012 20:27:17 +0800 Subject: i2c: imx: adopt pinctrl support Cc: linux-i2c@vger.kernel.org Cc: Wolfram Sang Signed-off-by: Shawn Guo Acked-by: Dong Aisheng --- drivers/i2c/busses/i2c-imx.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index dfb84b7ee55..56bce9a8bcb 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -51,6 +51,7 @@ #include #include #include +#include #include #include @@ -470,6 +471,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev) struct imx_i2c_struct *i2c_imx; struct resource *res; struct imxi2c_platform_data *pdata = pdev->dev.platform_data; + struct pinctrl *pinctrl; void __iomem *base; resource_size_t res_size; int irq, bitrate; @@ -520,6 +522,12 @@ static int __init i2c_imx_probe(struct platform_device *pdev) i2c_imx->base = base; i2c_imx->res = res; + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) { + ret = PTR_ERR(pinctrl); + goto fail3; + } + /* Get I2C clock */ i2c_imx->clk = clk_get(&pdev->dev, "i2c_clk"); if (IS_ERR(i2c_imx->clk)) { -- cgit v1.2.3-18-g5258 From dffa27e7a8626ed2d64f027b0f844fe6fe438c11 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 6 May 2012 20:28:12 +0800 Subject: spi/imx: adopt pinctrl support Cc: spi-devel-general@lists.sourceforge.net Cc: Grant Likely Signed-off-by: Shawn Guo Acked-by: Dong Aisheng --- drivers/spi/spi-imx.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 570f22053be..69c9a6601f4 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -37,6 +37,7 @@ #include #include #include +#include #include @@ -758,6 +759,7 @@ static int __devinit spi_imx_probe(struct platform_device *pdev) struct spi_master *master; struct spi_imx_data *spi_imx; struct resource *res; + struct pinctrl *pinctrl; int i, ret, num_cs; if (!np && !mxc_platform_info) { @@ -845,6 +847,12 @@ static int __devinit spi_imx_probe(struct platform_device *pdev) goto out_iounmap; } + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) { + ret = PTR_ERR(pinctrl); + goto out_free_irq; + } + spi_imx->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(spi_imx->clk)) { dev_err(&pdev->dev, "unable to get clock\n"); -- cgit v1.2.3-18-g5258 From 258e055111d3cde2607e0d04eb91da2f7a59b591 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 6 May 2012 22:53:35 +0800 Subject: serial: amba-pl011: adopt pinctrl support Cc: linux-serial@vger.kernel.org Cc: Greg Kroah-Hartman Signed-off-by: Shawn Guo Acked-by: Russell King --- drivers/tty/serial/amba-pl011.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 3d569cd68f5..062ef8c2b3c 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -52,6 +52,7 @@ #include #include #include +#include #include #include @@ -1916,6 +1917,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) { struct uart_amba_port *uap; struct vendor_data *vendor = id->data; + struct pinctrl *pinctrl; void __iomem *base; int i, ret; @@ -1940,6 +1942,12 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) goto free; } + pinctrl = devm_pinctrl_get_select_default(&dev->dev); + if (IS_ERR(pinctrl)) { + ret = PTR_ERR(pinctrl); + goto unmap; + } + uap->clk = clk_get(&dev->dev, NULL); if (IS_ERR(uap->clk)) { ret = PTR_ERR(uap->clk); -- cgit v1.2.3-18-g5258 From 2e174c3373bdbb4a4f35ac48d7c7fea181062f6f Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 6 May 2012 22:54:26 +0800 Subject: serial: mxs-auart: adopt pinctrl support Cc: linux-serial@vger.kernel.org Cc: Greg Kroah-Hartman Signed-off-by: Shawn Guo --- drivers/tty/serial/mxs-auart.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 55fd362b987..7081600bede 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -32,6 +32,7 @@ #include #include #include +#include #include @@ -678,6 +679,7 @@ static int __devinit mxs_auart_probe(struct platform_device *pdev) u32 version; int ret = 0; struct resource *r; + struct pinctrl *pinctrl; s = kzalloc(sizeof(struct mxs_auart_port), GFP_KERNEL); if (!s) { @@ -685,6 +687,12 @@ static int __devinit mxs_auart_probe(struct platform_device *pdev) goto out; } + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) { + ret = PTR_ERR(pinctrl); + goto out_free; + } + s->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(s->clk)) { ret = PTR_ERR(s->clk); -- cgit v1.2.3-18-g5258 From 9c92cf2409d7828b797c763c661bffbf66d251c0 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 6 May 2012 22:56:16 +0800 Subject: mmc: mxs-mmc: adopt pinctrl support Cc: linux-mmc@vger.kernel.org Signed-off-by: Shawn Guo Acked-by: Chris Ball --- drivers/mmc/host/mxs-mmc.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c index e3f5af96ab8..bb03ddda481 100644 --- a/drivers/mmc/host/mxs-mmc.c +++ b/drivers/mmc/host/mxs-mmc.c @@ -39,6 +39,7 @@ #include #include #include +#include #include #include @@ -682,6 +683,7 @@ static int mxs_mmc_probe(struct platform_device *pdev) struct mmc_host *mmc; struct resource *iores, *dmares, *r; struct mxs_mmc_platform_data *pdata; + struct pinctrl *pinctrl; int ret = 0, irq_err, irq_dma; dma_cap_mask_t mask; @@ -719,6 +721,12 @@ static int mxs_mmc_probe(struct platform_device *pdev) host->irq = irq_err; host->sdio_irq_en = 0; + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) { + ret = PTR_ERR(pinctrl); + goto out_iounmap; + } + host->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(host->clk)) { ret = PTR_ERR(host->clk); -- cgit v1.2.3-18-g5258 From 39febc018bd26edb9f9f73c0f5ee661de37c7869 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 6 May 2012 22:57:41 +0800 Subject: mtd: nand: gpmi: adopt pinctrl support Cc: linux-mtd@lists.infradead.org Cc: Artem Bityutskiy Signed-off-by: Shawn Guo --- drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index 9ec51cec2e1..8478fd9701a 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -24,6 +24,7 @@ #include #include #include +#include #include "gpmi-nand.h" /* add our owner bbt descriptor */ @@ -476,6 +477,7 @@ acquire_err: static int __devinit acquire_resources(struct gpmi_nand_data *this) { struct resources *res = &this->resources; + struct pinctrl *pinctrl; int ret; ret = acquire_register_block(this, GPMI_NAND_GPMI_REGS_ADDR_RES_NAME); @@ -494,6 +496,12 @@ static int __devinit acquire_resources(struct gpmi_nand_data *this) if (ret) goto exit_dma_channels; + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) { + ret = PTR_ERR(pinctrl); + goto exit_pin; + } + res->clock = clk_get(&this->pdev->dev, NULL); if (IS_ERR(res->clock)) { pr_err("can not get the clock\n"); @@ -503,6 +511,7 @@ static int __devinit acquire_resources(struct gpmi_nand_data *this) return 0; exit_clock: +exit_pin: release_dma_channels(this); exit_dma_channels: release_bch_irq(this); -- cgit v1.2.3-18-g5258 From d98d033c15b77d51ed723ba10c49fa13233e59c1 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 6 May 2012 22:59:45 +0800 Subject: i2c: mxs: adopt pinctrl support Cc: linux-i2c@vger.kernel.org Cc: Wolfram Sang Signed-off-by: Shawn Guo --- drivers/i2c/busses/i2c-mxs.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 3d471d56bf1..7c7711dc19d 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -26,6 +26,7 @@ #include #include #include +#include #include @@ -323,10 +324,15 @@ static int __devinit mxs_i2c_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct mxs_i2c_dev *i2c; struct i2c_adapter *adap; + struct pinctrl *pinctrl; struct resource *res; resource_size_t res_size; int err, irq; + pinctrl = devm_pinctrl_get_select_default(dev); + if (IS_ERR(pinctrl)) + return PTR_ERR(pinctrl); + i2c = devm_kzalloc(dev, sizeof(struct mxs_i2c_dev), GFP_KERNEL); if (!i2c) return -ENOMEM; -- cgit v1.2.3-18-g5258 From f755865f9082a6632f06b8314068a883508d91ca Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 6 May 2012 23:00:50 +0800 Subject: ASoC: mxs-saif: adopt pinctrl support Cc: alsa-devel@alsa-project.org Signed-off-by: Shawn Guo Acked-by: Mark Brown --- sound/soc/mxs/mxs-saif.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c index 53f4fd8fece..7fd224bb732 100644 --- a/sound/soc/mxs/mxs-saif.c +++ b/sound/soc/mxs/mxs-saif.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include @@ -625,6 +626,7 @@ static int mxs_saif_probe(struct platform_device *pdev) struct resource *iores, *dmares; struct mxs_saif *saif; struct mxs_saif_platform_data *pdata; + struct pinctrl *pinctrl; int ret = 0; if (pdev->id >= ARRAY_SIZE(mxs_saif)) @@ -650,6 +652,12 @@ static int mxs_saif_probe(struct platform_device *pdev) saif->master_id = saif->id; } + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) { + ret = PTR_ERR(pinctrl); + return ret; + } + saif->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(saif->clk)) { ret = PTR_ERR(saif->clk); -- cgit v1.2.3-18-g5258 From fe233b9df3842b3927c0275322a8047f8b33b194 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 6 May 2012 23:01:41 +0800 Subject: video: mxsfb: adopt pinctrl support Cc: linux-fbdev@vger.kernel.org Cc: Florian Tobias Schandinat Signed-off-by: Shawn Guo --- drivers/video/mxsfb.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c index 4a89f889852..6c6bc578d0f 100644 --- a/drivers/video/mxsfb.c +++ b/drivers/video/mxsfb.c @@ -45,6 +45,7 @@ #include #include #include +#include #include #define REG_SET 4 @@ -756,6 +757,7 @@ static int __devinit mxsfb_probe(struct platform_device *pdev) struct mxsfb_info *host; struct fb_info *fb_info; struct fb_modelist *modelist; + struct pinctrl *pinctrl; int i, ret; if (!pdata) { @@ -793,6 +795,12 @@ static int __devinit mxsfb_probe(struct platform_device *pdev) host->devdata = &mxsfb_devdata[pdev->id_entry->driver_data]; + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) { + ret = PTR_ERR(pinctrl); + goto error_getpin; + } + host->clk = clk_get(&host->pdev->dev, NULL); if (IS_ERR(host->clk)) { ret = PTR_ERR(host->clk); @@ -848,6 +856,7 @@ error_init_fb: error_pseudo_pallette: clk_put(host->clk); error_getclock: +error_getpin: iounmap(host->base); error_ioremap: framebuffer_release(fb_info); -- cgit v1.2.3-18-g5258 From a0f5e3631b07cabf624e7d818df76d47d9d21017 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 6 May 2012 23:13:13 +0800 Subject: ARM: mxs: enable pinctrl support Signed-off-by: Shawn Guo --- arch/arm/Kconfig | 1 + arch/arm/mach-mxs/Kconfig | 2 ++ 2 files changed, 3 insertions(+) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index cf006d40342..c67494fc05a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -469,6 +469,7 @@ config ARCH_MXS select CLKDEV_LOOKUP select CLKSRC_MMIO select HAVE_CLK_PREPARE + select PINCTRL help Support for Freescale MXS-based family of processors diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index c57f9964a71..07d5383d68e 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -9,11 +9,13 @@ config SOC_IMX23 bool select CPU_ARM926T select HAVE_PWM + select PINCTRL_IMX23 config SOC_IMX28 bool select CPU_ARM926T select HAVE_PWM + select PINCTRL_IMX28 comment "MXS platforms:" -- cgit v1.2.3-18-g5258