From 3d73998558beac1e56efaaf7c5bf3469ee4c6ba2 Mon Sep 17 00:00:00 2001
From: Jaecheol Lee <jc.lee@samsung.com>
Date: Wed, 16 Mar 2011 07:28:23 +0900
Subject: ARM: EXYNOS4: CPUIDLE Support
This patch supports cpuidle framework for EXYNOS4210. Currently,
Only one idle state is possible to use, but more idle states can
be added following by this patch.
Signed-off-by: Jaecheol Lee <jc.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-exynos4/Makefile | 1 +
arch/arm/mach-exynos4/cpuidle.c | 86 +++++++++++++++++++++++++++++++++++++++++
2 files changed, 87 insertions(+)
create mode 100644 arch/arm/mach-exynos4/cpuidle.c
diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
index 9be104f63c0..de197d6648a 100644
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos4/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_CPU_EXYNOS4210) += cpu.o init.o clock.o irq-combiner.o
obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o gpiolib.o irq-eint.o dma.o
obj-$(CONFIG_PM) += pm.o sleep.o
obj-$(CONFIG_CPU_FREQ) += cpufreq.o
+obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
diff --git a/arch/arm/mach-exynos4/cpuidle.c b/arch/arm/mach-exynos4/cpuidle.c
new file mode 100644
index 00000000000..bf7e96f2793
--- /dev/null
+++ b/arch/arm/mach-exynos4/cpuidle.c
@@ -0,0 +1,86 @@
+/* linux/arch/arm/mach-exynos4/cpuidle.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/cpuidle.h>
+#include <linux/io.h>
+
+#include <asm/proc-fns.h>
+
+static int exynos4_enter_idle(struct cpuidle_device *dev,
+ struct cpuidle_state *state);
+
+static struct cpuidle_state exynos4_cpuidle_set[] = {
+ [0] = {
+ .enter = exynos4_enter_idle,
+ .exit_latency = 1,
+ .target_residency = 100000,
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .name = "IDLE",
+ .desc = "ARM clock gating(WFI)",
+ },
+};
+
+static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device);
+
+static struct cpuidle_driver exynos4_idle_driver = {
+ .name = "exynos4_idle",
+ .owner = THIS_MODULE,
+};
+
+static int exynos4_enter_idle(struct cpuidle_device *dev,
+ struct cpuidle_state *state)
+{
+ struct timeval before, after;
+ int idle_time;
+
+ local_irq_disable();
+ do_gettimeofday(&before);
+
+ cpu_do_idle();
+
+ do_gettimeofday(&after);
+ local_irq_enable();
+ idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
+ (after.tv_usec - before.tv_usec);
+
+ return idle_time;
+}
+
+static int __init exynos4_init_cpuidle(void)
+{
+ int i, max_cpuidle_state, cpu_id;
+ struct cpuidle_device *device;
+
+ cpuidle_register_driver(&exynos4_idle_driver);
+
+ for_each_cpu(cpu_id, cpu_online_mask) {
+ device = &per_cpu(exynos4_cpuidle_device, cpu_id);
+ device->cpu = cpu_id;
+
+ device->state_count = (sizeof(exynos4_cpuidle_set) /
+ sizeof(struct cpuidle_state));
+
+ max_cpuidle_state = device->state_count;
+
+ for (i = 0; i < max_cpuidle_state; i++) {
+ memcpy(&device->states[i], &exynos4_cpuidle_set[i],
+ sizeof(struct cpuidle_state));
+ }
+
+ if (cpuidle_register_device(device)) {
+ printk(KERN_ERR "CPUidle register device failed\n,");
+ return -EIO;
+ }
+ }
+ return 0;
+}
+device_initcall(exynos4_init_cpuidle);
--
cgit v1.2.3-18-g5258
From 3260ecd859ba842c709f205cbc01408b826bb387 Mon Sep 17 00:00:00 2001
From: Joonyoung Shim <jy0922.shim@samsung.com>
Date: Wed, 23 Mar 2011 15:25:14 +0900
Subject: ARM: EXYNOS4: Add Atmel mXT touchscreen device to the NURI board
This patch is to support Atmel mXT touchscreen device to the NURI board.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-exynos4/Kconfig | 2 +
arch/arm/mach-exynos4/mach-nuri.c | 89 +++++++++++++++++++++++++++++++++++++++
2 files changed, 91 insertions(+)
diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index e849f67be47..11b57a4d53f 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -169,8 +169,10 @@ config MACH_NURI
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S3C_DEV_I2C1
+ select S3C_DEV_I2C3
select S3C_DEV_I2C5
select EXYNOS4_SETUP_I2C1
+ select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C5
select EXYNOS4_SETUP_SDHCI
select SAMSUNG_DEV_PWM
diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos4/mach-nuri.c
index b79ad010d19..d13c5e81c6a 100644
--- a/arch/arm/mach-exynos4/mach-nuri.c
+++ b/arch/arm/mach-exynos4/mach-nuri.c
@@ -12,6 +12,7 @@
#include <linux/serial_core.h>
#include <linux/input.h>
#include <linux/i2c.h>
+#include <linux/i2c/atmel_mxt_ts.h>
#include <linux/gpio_keys.h>
#include <linux/gpio.h>
#include <linux/regulator/machine.h>
@@ -30,6 +31,8 @@
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/sdhci.h>
+#include <plat/gpio-cfg.h>
+#include <plat/iic.h>
#include <mach/map.h>
@@ -257,6 +260,88 @@ static struct i2c_board_info i2c1_devs[] __initdata = {
/* Gyro, To be updated */
};
+/* TSP */
+static u8 mxt_init_vals[] = {
+ /* MXT_GEN_COMMAND(6) */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ /* MXT_GEN_POWER(7) */
+ 0x20, 0xff, 0x32,
+ /* MXT_GEN_ACQUIRE(8) */
+ 0x0a, 0x00, 0x05, 0x00, 0x00, 0x00, 0x09, 0x23,
+ /* MXT_TOUCH_MULTI(9) */
+ 0x00, 0x00, 0x00, 0x13, 0x0b, 0x00, 0x00, 0x00, 0x02, 0x00,
+ 0x00, 0x01, 0x01, 0x0e, 0x0a, 0x0a, 0x0a, 0x0a, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00,
+ /* MXT_TOUCH_KEYARRAY(15) */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00,
+ 0x00,
+ /* MXT_SPT_GPIOPWM(19) */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ /* MXT_PROCI_GRIPFACE(20) */
+ 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x28, 0x04,
+ 0x0f, 0x0a,
+ /* MXT_PROCG_NOISE(22) */
+ 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x23, 0x00,
+ 0x00, 0x05, 0x0f, 0x19, 0x23, 0x2d, 0x03,
+ /* MXT_TOUCH_PROXIMITY(23) */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00,
+ /* MXT_PROCI_ONETOUCH(24) */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ /* MXT_SPT_SELFTEST(25) */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+ /* MXT_PROCI_TWOTOUCH(27) */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ /* MXT_SPT_CTECONFIG(28) */
+ 0x00, 0x00, 0x02, 0x08, 0x10, 0x00,
+};
+
+static struct mxt_platform_data mxt_platform_data = {
+ .config = mxt_init_vals,
+ .config_length = ARRAY_SIZE(mxt_init_vals),
+
+ .x_line = 18,
+ .y_line = 11,
+ .x_size = 1024,
+ .y_size = 600,
+ .blen = 0x1,
+ .threshold = 0x28,
+ .voltage = 2800000, /* 2.8V */
+ .orient = MXT_DIAGONAL_COUNTER,
+ .irqflags = IRQF_TRIGGER_FALLING,
+};
+
+static struct s3c2410_platform_i2c i2c3_data __initdata = {
+ .flags = 0,
+ .bus_num = 3,
+ .slave_addr = 0x10,
+ .frequency = 400 * 1000,
+ .sda_delay = 100,
+};
+
+static struct i2c_board_info i2c3_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("atmel_mxt_ts", 0x4a),
+ .platform_data = &mxt_platform_data,
+ .irq = IRQ_EINT(4),
+ },
+};
+
+static void __init nuri_tsp_init(void)
+{
+ int gpio;
+
+ /* TOUCH_INT: XEINT_4 */
+ gpio = EXYNOS4_GPX0(4);
+ gpio_request(gpio, "TOUCH_INT");
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+}
+
/* GPIO I2C 5 (PMIC) */
static struct i2c_board_info i2c5_devs[] __initdata = {
/* max8997, To be updated */
@@ -270,6 +355,7 @@ static struct platform_device *nuri_devices[] __initdata = {
&s3c_device_hsmmc3,
&s3c_device_wdt,
&s3c_device_timer[0],
+ &s3c_device_i2c3,
/* NURI Devices */
&nuri_gpio_keys,
@@ -287,8 +373,11 @@ static void __init nuri_map_io(void)
static void __init nuri_machine_init(void)
{
nuri_sdhci_init();
+ nuri_tsp_init();
i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
+ s3c_i2c3_set_platdata(&i2c3_data);
+ i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
/* Last */
--
cgit v1.2.3-18-g5258
From 14587b8d4be652fccc8e0e82ae9baa4365b06d9b Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Fri, 25 Mar 2011 10:30:08 +0900
Subject: ARM: exynos4_defconfig: Update for adding machines
This patch adds MACH_ARMLEX4210 and MACH_NURI in exynos4_defconfig.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/configs/exynos4_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/configs/exynos4_defconfig b/arch/arm/configs/exynos4_defconfig
index 2ffba24d2e2..da53ff3b4d7 100644
--- a/arch/arm/configs/exynos4_defconfig
+++ b/arch/arm/configs/exynos4_defconfig
@@ -8,7 +8,9 @@ CONFIG_ARCH_EXYNOS4=y
CONFIG_S3C_LOWLEVEL_UART_PORT=1
CONFIG_MACH_SMDKC210=y
CONFIG_MACH_SMDKV310=y
+CONFIG_MACH_ARMLEX4210=y
CONFIG_MACH_UNIVERSAL_C210=y
+CONFIG_MACH_NURI=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_SMP=y
--
cgit v1.2.3-18-g5258
From 3185847957d4834d1b30b253b1c71bb05bad7265 Mon Sep 17 00:00:00 2001
From: Joonyoung Shim <jy0922.shim@samsung.com>
Date: Fri, 6 May 2011 09:37:17 +0900
Subject: ARM: S3C64XX: Remove gpio-bank-X header files
The gpio-bank-X header files of S3C64XX have definitions
which can be substituted by other common GPIO API.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-s3c64xx/dev-spi.c | 20 +++----
arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h | 48 ---------------
arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h | 60 -------------------
arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h | 53 -----------------
arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h | 49 ----------------
arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h | 44 --------------
arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h | 71 -----------------------
arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h | 42 --------------
arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h | 74 ------------------------
arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h | 40 -------------
arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h | 36 ------------
arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h | 54 -----------------
arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h | 70 ----------------------
arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h | 69 ----------------------
arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h | 46 ---------------
arch/arm/mach-s3c64xx/mach-smdk6410.c | 1 -
arch/arm/mach-s3c64xx/pm.c | 34 ++++++-----
arch/arm/mach-s3c64xx/setup-i2c0.c | 7 +--
arch/arm/mach-s3c64xx/setup-i2c1.c | 7 +--
arch/arm/mach-s3c64xx/sleep.S | 8 ++-
20 files changed, 37 insertions(+), 796 deletions(-)
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h
diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c
index 405e6212891..82db072cb83 100644
--- a/arch/arm/mach-s3c64xx/dev-spi.c
+++ b/arch/arm/mach-s3c64xx/dev-spi.c
@@ -16,7 +16,6 @@
#include <mach/dma.h>
#include <mach/map.h>
-#include <mach/gpio-bank-c.h>
#include <mach/spi-clocks.h>
#include <mach/irqs.h>
@@ -40,23 +39,15 @@ static char *spi_src_clks[] = {
*/
static int s3c64xx_spi_cfg_gpio(struct platform_device *pdev)
{
+ unsigned int base;
+
switch (pdev->id) {
case 0:
- s3c_gpio_cfgpin(S3C64XX_GPC(0), S3C64XX_GPC0_SPI_MISO0);
- s3c_gpio_cfgpin(S3C64XX_GPC(1), S3C64XX_GPC1_SPI_CLKO);
- s3c_gpio_cfgpin(S3C64XX_GPC(2), S3C64XX_GPC2_SPI_MOSIO);
- s3c_gpio_setpull(S3C64XX_GPC(0), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S3C64XX_GPC(1), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S3C64XX_GPC(2), S3C_GPIO_PULL_UP);
+ base = S3C64XX_GPC(0);
break;
case 1:
- s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C64XX_GPC4_SPI_MISO1);
- s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C64XX_GPC5_SPI_CLK1);
- s3c_gpio_cfgpin(S3C64XX_GPC(6), S3C64XX_GPC6_SPI_MOSI1);
- s3c_gpio_setpull(S3C64XX_GPC(4), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S3C64XX_GPC(5), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S3C64XX_GPC(6), S3C_GPIO_PULL_UP);
+ base = S3C64XX_GPC(4);
break;
default:
@@ -64,6 +55,9 @@ static int s3c64xx_spi_cfg_gpio(struct platform_device *pdev)
return -EINVAL;
}
+ s3c_gpio_cfgall_range(base, 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+
return 0;
}
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h
deleted file mode 100644
index 34212e1a7e8..00000000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank A register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPACON (S3C64XX_GPA_BASE + 0x00)
-#define S3C64XX_GPADAT (S3C64XX_GPA_BASE + 0x04)
-#define S3C64XX_GPAPUD (S3C64XX_GPA_BASE + 0x08)
-#define S3C64XX_GPACONSLP (S3C64XX_GPA_BASE + 0x0c)
-#define S3C64XX_GPAPUDSLP (S3C64XX_GPA_BASE + 0x10)
-
-#define S3C64XX_GPA_CONMASK(__gpio) (0xf << ((__gpio) * 4))
-#define S3C64XX_GPA_INPUT(__gpio) (0x0 << ((__gpio) * 4))
-#define S3C64XX_GPA_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPA0_UART_RXD0 (0x02 << 0)
-#define S3C64XX_GPA0_EINT_G1_0 (0x07 << 0)
-
-#define S3C64XX_GPA1_UART_TXD0 (0x02 << 4)
-#define S3C64XX_GPA1_EINT_G1_1 (0x07 << 4)
-
-#define S3C64XX_GPA2_UART_nCTS0 (0x02 << 8)
-#define S3C64XX_GPA2_EINT_G1_2 (0x07 << 8)
-
-#define S3C64XX_GPA3_UART_nRTS0 (0x02 << 12)
-#define S3C64XX_GPA3_EINT_G1_3 (0x07 << 12)
-
-#define S3C64XX_GPA4_UART_RXD1 (0x02 << 16)
-#define S3C64XX_GPA4_EINT_G1_4 (0x07 << 16)
-
-#define S3C64XX_GPA5_UART_TXD1 (0x02 << 20)
-#define S3C64XX_GPA5_EINT_G1_5 (0x07 << 20)
-
-#define S3C64XX_GPA6_UART_nCTS1 (0x02 << 24)
-#define S3C64XX_GPA6_EINT_G1_6 (0x07 << 24)
-
-#define S3C64XX_GPA7_UART_nRTS1 (0x02 << 28)
-#define S3C64XX_GPA7_EINT_G1_7 (0x07 << 28)
-
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h
deleted file mode 100644
index 7232c037e64..00000000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank B register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPBCON (S3C64XX_GPB_BASE + 0x00)
-#define S3C64XX_GPBDAT (S3C64XX_GPB_BASE + 0x04)
-#define S3C64XX_GPBPUD (S3C64XX_GPB_BASE + 0x08)
-#define S3C64XX_GPBCONSLP (S3C64XX_GPB_BASE + 0x0c)
-#define S3C64XX_GPBPUDSLP (S3C64XX_GPB_BASE + 0x10)
-
-#define S3C64XX_GPB_CONMASK(__gpio) (0xf << ((__gpio) * 4))
-#define S3C64XX_GPB_INPUT(__gpio) (0x0 << ((__gpio) * 4))
-#define S3C64XX_GPB_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPB0_UART_RXD2 (0x02 << 0)
-#define S3C64XX_GPB0_EXTDMA_REQ (0x03 << 0)
-#define S3C64XX_GPB0_IrDA_RXD (0x04 << 0)
-#define S3C64XX_GPB0_ADDR_CF0 (0x05 << 0)
-#define S3C64XX_GPB0_EINT_G1_8 (0x07 << 0)
-
-#define S3C64XX_GPB1_UART_TXD2 (0x02 << 4)
-#define S3C64XX_GPB1_EXTDMA_ACK (0x03 << 4)
-#define S3C64XX_GPB1_IrDA_TXD (0x04 << 4)
-#define S3C64XX_GPB1_ADDR_CF1 (0x05 << 4)
-#define S3C64XX_GPB1_EINT_G1_9 (0x07 << 4)
-
-#define S3C64XX_GPB2_UART_RXD3 (0x02 << 8)
-#define S3C64XX_GPB2_IrDA_RXD (0x03 << 8)
-#define S3C64XX_GPB2_EXTDMA_REQ (0x04 << 8)
-#define S3C64XX_GPB2_ADDR_CF2 (0x05 << 8)
-#define S3C64XX_GPB2_I2C_SCL1 (0x06 << 8)
-#define S3C64XX_GPB2_EINT_G1_10 (0x07 << 8)
-
-#define S3C64XX_GPB3_UART_TXD3 (0x02 << 12)
-#define S3C64XX_GPB3_IrDA_TXD (0x03 << 12)
-#define S3C64XX_GPB3_EXTDMA_ACK (0x04 << 12)
-#define S3C64XX_GPB3_I2C_SDA1 (0x06 << 12)
-#define S3C64XX_GPB3_EINT_G1_11 (0x07 << 12)
-
-#define S3C64XX_GPB4_IrDA_SDBW (0x02 << 16)
-#define S3C64XX_GPB4_CAM_FIELD (0x03 << 16)
-#define S3C64XX_GPB4_CF_DATA_DIR (0x04 << 16)
-#define S3C64XX_GPB4_EINT_G1_12 (0x07 << 16)
-
-#define S3C64XX_GPB5_I2C_SCL0 (0x02 << 20)
-#define S3C64XX_GPB5_EINT_G1_13 (0x07 << 20)
-
-#define S3C64XX_GPB6_I2C_SDA0 (0x02 << 24)
-#define S3C64XX_GPB6_EINT_G1_14 (0x07 << 24)
-
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h
deleted file mode 100644
index db189ab1639..00000000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank C register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPCCON (S3C64XX_GPC_BASE + 0x00)
-#define S3C64XX_GPCDAT (S3C64XX_GPC_BASE + 0x04)
-#define S3C64XX_GPCPUD (S3C64XX_GPC_BASE + 0x08)
-#define S3C64XX_GPCCONSLP (S3C64XX_GPC_BASE + 0x0c)
-#define S3C64XX_GPCPUDSLP (S3C64XX_GPC_BASE + 0x10)
-
-#define S3C64XX_GPC_CONMASK(__gpio) (0xf << ((__gpio) * 4))
-#define S3C64XX_GPC_INPUT(__gpio) (0x0 << ((__gpio) * 4))
-#define S3C64XX_GPC_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPC0_SPI_MISO0 (0x02 << 0)
-#define S3C64XX_GPC0_EINT_G2_0 (0x07 << 0)
-
-#define S3C64XX_GPC1_SPI_CLKO (0x02 << 4)
-#define S3C64XX_GPC1_EINT_G2_1 (0x07 << 4)
-
-#define S3C64XX_GPC2_SPI_MOSIO (0x02 << 8)
-#define S3C64XX_GPC2_EINT_G2_2 (0x07 << 8)
-
-#define S3C64XX_GPC3_SPI_nCSO (0x02 << 12)
-#define S3C64XX_GPC3_EINT_G2_3 (0x07 << 12)
-
-#define S3C64XX_GPC4_SPI_MISO1 (0x02 << 16)
-#define S3C64XX_GPC4_MMC2_CMD (0x03 << 16)
-#define S3C64XX_GPC4_I2S_V40_DO0 (0x05 << 16)
-#define S3C64XX_GPC4_EINT_G2_4 (0x07 << 16)
-
-#define S3C64XX_GPC5_SPI_CLK1 (0x02 << 20)
-#define S3C64XX_GPC5_MMC2_CLK (0x03 << 20)
-#define S3C64XX_GPC5_I2S_V40_DO1 (0x05 << 20)
-#define S3C64XX_GPC5_EINT_G2_5 (0x07 << 20)
-
-#define S3C64XX_GPC6_SPI_MOSI1 (0x02 << 24)
-#define S3C64XX_GPC6_EINT_G2_6 (0x07 << 24)
-
-#define S3C64XX_GPC7_SPI_nCS1 (0x02 << 28)
-#define S3C64XX_GPC7_I2S_V40_DO2 (0x05 << 28)
-#define S3C64XX_GPC7_EINT_G2_7 (0x07 << 28)
-
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h
deleted file mode 100644
index 1a01cee7aca..00000000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank D register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPDCON (S3C64XX_GPD_BASE + 0x00)
-#define S3C64XX_GPDDAT (S3C64XX_GPD_BASE + 0x04)
-#define S3C64XX_GPDPUD (S3C64XX_GPD_BASE + 0x08)
-#define S3C64XX_GPDCONSLP (S3C64XX_GPD_BASE + 0x0c)
-#define S3C64XX_GPDPUDSLP (S3C64XX_GPD_BASE + 0x10)
-
-#define S3C64XX_GPD_CONMASK(__gpio) (0xf << ((__gpio) * 4))
-#define S3C64XX_GPD_INPUT(__gpio) (0x0 << ((__gpio) * 4))
-#define S3C64XX_GPD_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPD0_PCM0_SCLK (0x02 << 0)
-#define S3C64XX_GPD0_I2S0_CLK (0x03 << 0)
-#define S3C64XX_GPD0_AC97_BITCLK (0x04 << 0)
-#define S3C64XX_GPD0_EINT_G3_0 (0x07 << 0)
-
-#define S3C64XX_GPD1_PCM0_EXTCLK (0x02 << 4)
-#define S3C64XX_GPD1_I2S0_CDCLK (0x03 << 4)
-#define S3C64XX_GPD1_AC97_nRESET (0x04 << 4)
-#define S3C64XX_GPD1_EINT_G3_1 (0x07 << 4)
-
-#define S3C64XX_GPD2_PCM0_FSYNC (0x02 << 8)
-#define S3C64XX_GPD2_I2S0_LRCLK (0x03 << 8)
-#define S3C64XX_GPD2_AC97_SYNC (0x04 << 8)
-#define S3C64XX_GPD2_EINT_G3_2 (0x07 << 8)
-
-#define S3C64XX_GPD3_PCM0_SIN (0x02 << 12)
-#define S3C64XX_GPD3_I2S0_DI (0x03 << 12)
-#define S3C64XX_GPD3_AC97_SDI (0x04 << 12)
-#define S3C64XX_GPD3_EINT_G3_3 (0x07 << 12)
-
-#define S3C64XX_GPD4_PCM0_SOUT (0x02 << 16)
-#define S3C64XX_GPD4_I2S0_D0 (0x03 << 16)
-#define S3C64XX_GPD4_AC97_SDO (0x04 << 16)
-#define S3C64XX_GPD4_EINT_G3_4 (0x07 << 16)
-
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h
deleted file mode 100644
index f057adb627d..00000000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank E register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPECON (S3C64XX_GPE_BASE + 0x00)
-#define S3C64XX_GPEDAT (S3C64XX_GPE_BASE + 0x04)
-#define S3C64XX_GPEPUD (S3C64XX_GPE_BASE + 0x08)
-#define S3C64XX_GPECONSLP (S3C64XX_GPE_BASE + 0x0c)
-#define S3C64XX_GPEPUDSLP (S3C64XX_GPE_BASE + 0x10)
-
-#define S3C64XX_GPE_CONMASK(__gpio) (0xf << ((__gpio) * 4))
-#define S3C64XX_GPE_INPUT(__gpio) (0x0 << ((__gpio) * 4))
-#define S3C64XX_GPE_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPE0_PCM1_SCLK (0x02 << 0)
-#define S3C64XX_GPE0_I2S1_CLK (0x03 << 0)
-#define S3C64XX_GPE0_AC97_BITCLK (0x04 << 0)
-
-#define S3C64XX_GPE1_PCM1_EXTCLK (0x02 << 4)
-#define S3C64XX_GPE1_I2S1_CDCLK (0x03 << 4)
-#define S3C64XX_GPE1_AC97_nRESET (0x04 << 4)
-
-#define S3C64XX_GPE2_PCM1_FSYNC (0x02 << 8)
-#define S3C64XX_GPE2_I2S1_LRCLK (0x03 << 8)
-#define S3C64XX_GPE2_AC97_SYNC (0x04 << 8)
-
-#define S3C64XX_GPE3_PCM1_SIN (0x02 << 12)
-#define S3C64XX_GPE3_I2S1_DI (0x03 << 12)
-#define S3C64XX_GPE3_AC97_SDI (0x04 << 12)
-
-#define S3C64XX_GPE4_PCM1_SOUT (0x02 << 16)
-#define S3C64XX_GPE4_I2S1_D0 (0x03 << 16)
-#define S3C64XX_GPE4_AC97_SDO (0x04 << 16)
-
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h
deleted file mode 100644
index 62ab8f5e783..00000000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank F register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPFCON (S3C64XX_GPF_BASE + 0x00)
-#define S3C64XX_GPFDAT (S3C64XX_GPF_BASE + 0x04)
-#define S3C64XX_GPFPUD (S3C64XX_GPF_BASE + 0x08)
-#define S3C64XX_GPFCONSLP (S3C64XX_GPF_BASE + 0x0c)
-#define S3C64XX_GPFPUDSLP (S3C64XX_GPF_BASE + 0x10)
-
-#define S3C64XX_GPF_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
-#define S3C64XX_GPF_INPUT(__gpio) (0x0 << ((__gpio) * 2))
-#define S3C64XX_GPF_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPF0_CAMIF_CLK (0x02 << 0)
-#define S3C64XX_GPF0_EINT_G4_0 (0x03 << 0)
-
-#define S3C64XX_GPF1_CAMIF_HREF (0x02 << 2)
-#define S3C64XX_GPF1_EINT_G4_1 (0x03 << 2)
-
-#define S3C64XX_GPF2_CAMIF_PCLK (0x02 << 4)
-#define S3C64XX_GPF2_EINT_G4_2 (0x03 << 4)
-
-#define S3C64XX_GPF3_CAMIF_nRST (0x02 << 6)
-#define S3C64XX_GPF3_EINT_G4_3 (0x03 << 6)
-
-#define S3C64XX_GPF4_CAMIF_VSYNC (0x02 << 8)
-#define S3C64XX_GPF4_EINT_G4_4 (0x03 << 8)
-
-#define S3C64XX_GPF5_CAMIF_YDATA0 (0x02 << 10)
-#define S3C64XX_GPF5_EINT_G4_5 (0x03 << 10)
-
-#define S3C64XX_GPF6_CAMIF_YDATA1 (0x02 << 12)
-#define S3C64XX_GPF6_EINT_G4_6 (0x03 << 12)
-
-#define S3C64XX_GPF7_CAMIF_YDATA2 (0x02 << 14)
-#define S3C64XX_GPF7_EINT_G4_7 (0x03 << 14)
-
-#define S3C64XX_GPF8_CAMIF_YDATA3 (0x02 << 16)
-#define S3C64XX_GPF8_EINT_G4_8 (0x03 << 16)
-
-#define S3C64XX_GPF9_CAMIF_YDATA4 (0x02 << 18)
-#define S3C64XX_GPF9_EINT_G4_9 (0x03 << 18)
-
-#define S3C64XX_GPF10_CAMIF_YDATA5 (0x02 << 20)
-#define S3C64XX_GPF10_EINT_G4_10 (0x03 << 20)
-
-#define S3C64XX_GPF11_CAMIF_YDATA6 (0x02 << 22)
-#define S3C64XX_GPF11_EINT_G4_11 (0x03 << 22)
-
-#define S3C64XX_GPF12_CAMIF_YDATA7 (0x02 << 24)
-#define S3C64XX_GPF12_EINT_G4_12 (0x03 << 24)
-
-#define S3C64XX_GPF13_PWM_ECLK (0x02 << 26)
-#define S3C64XX_GPF13_EINT_G4_13 (0x03 << 26)
-
-#define S3C64XX_GPF14_PWM_TOUT0 (0x02 << 28)
-#define S3C64XX_GPF14_CLKOUT0 (0x03 << 28)
-
-#define S3C64XX_GPF15_PWM_TOUT1 (0x02 << 30)
-
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h
deleted file mode 100644
index b94954af159..00000000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank G register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPGCON (S3C64XX_GPG_BASE + 0x00)
-#define S3C64XX_GPGDAT (S3C64XX_GPG_BASE + 0x04)
-#define S3C64XX_GPGPUD (S3C64XX_GPG_BASE + 0x08)
-#define S3C64XX_GPGCONSLP (S3C64XX_GPG_BASE + 0x0c)
-#define S3C64XX_GPGPUDSLP (S3C64XX_GPG_BASE + 0x10)
-
-#define S3C64XX_GPG_CONMASK(__gpio) (0xf << ((__gpio) * 4))
-#define S3C64XX_GPG_INPUT(__gpio) (0x0 << ((__gpio) * 4))
-#define S3C64XX_GPG_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPG0_MMC0_CLK (0x02 << 0)
-#define S3C64XX_GPG0_EINT_G5_0 (0x07 << 0)
-
-#define S3C64XX_GPG1_MMC0_CMD (0x02 << 4)
-#define S3C64XX_GPG1_EINT_G5_1 (0x07 << 4)
-
-#define S3C64XX_GPG2_MMC0_DATA0 (0x02 << 8)
-#define S3C64XX_GPG2_EINT_G5_2 (0x07 << 8)
-
-#define S3C64XX_GPG3_MMC0_DATA1 (0x02 << 12)
-#define S3C64XX_GPG3_EINT_G5_3 (0x07 << 12)
-
-#define S3C64XX_GPG4_MMC0_DATA2 (0x02 << 16)
-#define S3C64XX_GPG4_EINT_G5_4 (0x07 << 16)
-
-#define S3C64XX_GPG5_MMC0_DATA3 (0x02 << 20)
-#define S3C64XX_GPG5_EINT_G5_5 (0x07 << 20)
-
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h
deleted file mode 100644
index 5d75aaad865..00000000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank H register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPHCON0 (S3C64XX_GPH_BASE + 0x00)
-#define S3C64XX_GPHCON1 (S3C64XX_GPH_BASE + 0x04)
-#define S3C64XX_GPHDAT (S3C64XX_GPH_BASE + 0x08)
-#define S3C64XX_GPHPUD (S3C64XX_GPH_BASE + 0x0c)
-#define S3C64XX_GPHCONSLP (S3C64XX_GPH_BASE + 0x10)
-#define S3C64XX_GPHPUDSLP (S3C64XX_GPH_BASE + 0x14)
-
-#define S3C64XX_GPH_CONMASK(__gpio) (0xf << ((__gpio) * 4))
-#define S3C64XX_GPH_INPUT(__gpio) (0x0 << ((__gpio) * 4))
-#define S3C64XX_GPH_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPH0_MMC1_CLK (0x02 << 0)
-#define S3C64XX_GPH0_KP_COL0 (0x04 << 0)
-#define S3C64XX_GPH0_EINT_G6_0 (0x07 << 0)
-
-#define S3C64XX_GPH1_MMC1_CMD (0x02 << 4)
-#define S3C64XX_GPH1_KP_COL1 (0x04 << 4)
-#define S3C64XX_GPH1_EINT_G6_1 (0x07 << 4)
-
-#define S3C64XX_GPH2_MMC1_DATA0 (0x02 << 8)
-#define S3C64XX_GPH2_KP_COL2 (0x04 << 8)
-#define S3C64XX_GPH2_EINT_G6_2 (0x07 << 8)
-
-#define S3C64XX_GPH3_MMC1_DATA1 (0x02 << 12)
-#define S3C64XX_GPH3_KP_COL3 (0x04 << 12)
-#define S3C64XX_GPH3_EINT_G6_3 (0x07 << 12)
-
-#define S3C64XX_GPH4_MMC1_DATA2 (0x02 << 16)
-#define S3C64XX_GPH4_KP_COL4 (0x04 << 16)
-#define S3C64XX_GPH4_EINT_G6_4 (0x07 << 16)
-
-#define S3C64XX_GPH5_MMC1_DATA3 (0x02 << 20)
-#define S3C64XX_GPH5_KP_COL5 (0x04 << 20)
-#define S3C64XX_GPH5_EINT_G6_5 (0x07 << 20)
-
-#define S3C64XX_GPH6_MMC1_DATA4 (0x02 << 24)
-#define S3C64XX_GPH6_MMC2_DATA0 (0x03 << 24)
-#define S3C64XX_GPH6_KP_COL6 (0x04 << 24)
-#define S3C64XX_GPH6_I2S_V40_BCLK (0x05 << 24)
-#define S3C64XX_GPH6_ADDR_CF0 (0x06 << 24)
-#define S3C64XX_GPH6_EINT_G6_6 (0x07 << 24)
-
-#define S3C64XX_GPH7_MMC1_DATA5 (0x02 << 28)
-#define S3C64XX_GPH7_MMC2_DATA1 (0x03 << 28)
-#define S3C64XX_GPH7_KP_COL7 (0x04 << 28)
-#define S3C64XX_GPH7_I2S_V40_CDCLK (0x05 << 28)
-#define S3C64XX_GPH7_ADDR_CF1 (0x06 << 28)
-#define S3C64XX_GPH7_EINT_G6_7 (0x07 << 28)
-
-#define S3C64XX_GPH8_MMC1_DATA6 (0x02 << 0)
-#define S3C64XX_GPH8_MMC2_DATA2 (0x03 << 0)
-#define S3C64XX_GPH8_I2S_V40_LRCLK (0x05 << 0)
-#define S3C64XX_GPH8_ADDR_CF2 (0x06 << 0)
-#define S3C64XX_GPH8_EINT_G6_8 (0x07 << 0)
-
-#define S3C64XX_GPH9_OUTPUT (0x01 << 4)
-#define S3C64XX_GPH9_MMC1_DATA7 (0x02 << 4)
-#define S3C64XX_GPH9_MMC2_DATA3 (0x03 << 4)
-#define S3C64XX_GPH9_I2S_V40_DI (0x05 << 4)
-#define S3C64XX_GPH9_EINT_G6_9 (0x07 << 4)
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h
deleted file mode 100644
index 4ceaa6098bc..00000000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank I register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPICON (S3C64XX_GPI_BASE + 0x00)
-#define S3C64XX_GPIDAT (S3C64XX_GPI_BASE + 0x04)
-#define S3C64XX_GPIPUD (S3C64XX_GPI_BASE + 0x08)
-#define S3C64XX_GPICONSLP (S3C64XX_GPI_BASE + 0x0c)
-#define S3C64XX_GPIPUDSLP (S3C64XX_GPI_BASE + 0x10)
-
-#define S3C64XX_GPI_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
-#define S3C64XX_GPI_INPUT(__gpio) (0x0 << ((__gpio) * 2))
-#define S3C64XX_GPI_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPI0_VD0 (0x02 << 0)
-#define S3C64XX_GPI1_VD1 (0x02 << 2)
-#define S3C64XX_GPI2_VD2 (0x02 << 4)
-#define S3C64XX_GPI3_VD3 (0x02 << 6)
-#define S3C64XX_GPI4_VD4 (0x02 << 8)
-#define S3C64XX_GPI5_VD5 (0x02 << 10)
-#define S3C64XX_GPI6_VD6 (0x02 << 12)
-#define S3C64XX_GPI7_VD7 (0x02 << 14)
-#define S3C64XX_GPI8_VD8 (0x02 << 16)
-#define S3C64XX_GPI9_VD9 (0x02 << 18)
-#define S3C64XX_GPI10_VD10 (0x02 << 20)
-#define S3C64XX_GPI11_VD11 (0x02 << 22)
-#define S3C64XX_GPI12_VD12 (0x02 << 24)
-#define S3C64XX_GPI13_VD13 (0x02 << 26)
-#define S3C64XX_GPI14_VD14 (0x02 << 28)
-#define S3C64XX_GPI15_VD15 (0x02 << 30)
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h
deleted file mode 100644
index 6f25cd079a4..00000000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank J register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPJCON (S3C64XX_GPJ_BASE + 0x00)
-#define S3C64XX_GPJDAT (S3C64XX_GPJ_BASE + 0x04)
-#define S3C64XX_GPJPUD (S3C64XX_GPJ_BASE + 0x08)
-#define S3C64XX_GPJCONSLP (S3C64XX_GPJ_BASE + 0x0c)
-#define S3C64XX_GPJPUDSLP (S3C64XX_GPJ_BASE + 0x10)
-
-#define S3C64XX_GPJ_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
-#define S3C64XX_GPJ_INPUT(__gpio) (0x0 << ((__gpio) * 2))
-#define S3C64XX_GPJ_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPJ0_VD16 (0x02 << 0)
-#define S3C64XX_GPJ1_VD17 (0x02 << 2)
-#define S3C64XX_GPJ2_VD18 (0x02 << 4)
-#define S3C64XX_GPJ3_VD19 (0x02 << 6)
-#define S3C64XX_GPJ4_VD20 (0x02 << 8)
-#define S3C64XX_GPJ5_VD21 (0x02 << 10)
-#define S3C64XX_GPJ6_VD22 (0x02 << 12)
-#define S3C64XX_GPJ7_VD23 (0x02 << 14)
-#define S3C64XX_GPJ8_LCD_HSYNC (0x02 << 16)
-#define S3C64XX_GPJ9_LCD_VSYNC (0x02 << 18)
-#define S3C64XX_GPJ10_LCD_VDEN (0x02 << 20)
-#define S3C64XX_GPJ11_LCD_VCLK (0x02 << 22)
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h
deleted file mode 100644
index d0aeda1cd9d..00000000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank N register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPNCON (S3C64XX_GPN_BASE + 0x00)
-#define S3C64XX_GPNDAT (S3C64XX_GPN_BASE + 0x04)
-#define S3C64XX_GPNPUD (S3C64XX_GPN_BASE + 0x08)
-
-#define S3C64XX_GPN_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
-#define S3C64XX_GPN_INPUT(__gpio) (0x0 << ((__gpio) * 2))
-#define S3C64XX_GPN_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPN0_EINT0 (0x02 << 0)
-#define S3C64XX_GPN0_KP_ROW0 (0x03 << 0)
-
-#define S3C64XX_GPN1_EINT1 (0x02 << 2)
-#define S3C64XX_GPN1_KP_ROW1 (0x03 << 2)
-
-#define S3C64XX_GPN2_EINT2 (0x02 << 4)
-#define S3C64XX_GPN2_KP_ROW2 (0x03 << 4)
-
-#define S3C64XX_GPN3_EINT3 (0x02 << 6)
-#define S3C64XX_GPN3_KP_ROW3 (0x03 << 6)
-
-#define S3C64XX_GPN4_EINT4 (0x02 << 8)
-#define S3C64XX_GPN4_KP_ROW4 (0x03 << 8)
-
-#define S3C64XX_GPN5_EINT5 (0x02 << 10)
-#define S3C64XX_GPN5_KP_ROW5 (0x03 << 10)
-
-#define S3C64XX_GPN6_EINT6 (0x02 << 12)
-#define S3C64XX_GPN6_KP_ROW6 (0x03 << 12)
-
-#define S3C64XX_GPN7_EINT7 (0x02 << 14)
-#define S3C64XX_GPN7_KP_ROW7 (0x03 << 14)
-
-#define S3C64XX_GPN8_EINT8 (0x02 << 16)
-#define S3C64XX_GPN9_EINT9 (0x02 << 18)
-#define S3C64XX_GPN10_EINT10 (0x02 << 20)
-#define S3C64XX_GPN11_EINT11 (0x02 << 22)
-#define S3C64XX_GPN12_EINT12 (0x02 << 24)
-#define S3C64XX_GPN13_EINT13 (0x02 << 26)
-#define S3C64XX_GPN14_EINT14 (0x02 << 28)
-#define S3C64XX_GPN15_EINT15 (0x02 << 30)
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h
deleted file mode 100644
index 21868fa102d..00000000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank O register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPOCON (S3C64XX_GPO_BASE + 0x00)
-#define S3C64XX_GPODAT (S3C64XX_GPO_BASE + 0x04)
-#define S3C64XX_GPOPUD (S3C64XX_GPO_BASE + 0x08)
-#define S3C64XX_GPOCONSLP (S3C64XX_GPO_BASE + 0x0c)
-#define S3C64XX_GPOPUDSLP (S3C64XX_GPO_BASE + 0x10)
-
-#define S3C64XX_GPO_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
-#define S3C64XX_GPO_INPUT(__gpio) (0x0 << ((__gpio) * 2))
-#define S3C64XX_GPO_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPO0_MEM0_nCS2 (0x02 << 0)
-#define S3C64XX_GPO0_EINT_G7_0 (0x03 << 0)
-
-#define S3C64XX_GPO1_MEM0_nCS3 (0x02 << 2)
-#define S3C64XX_GPO1_EINT_G7_1 (0x03 << 2)
-
-#define S3C64XX_GPO2_MEM0_nCS4 (0x02 << 4)
-#define S3C64XX_GPO2_EINT_G7_2 (0x03 << 4)
-
-#define S3C64XX_GPO3_MEM0_nCS5 (0x02 << 6)
-#define S3C64XX_GPO3_EINT_G7_3 (0x03 << 6)
-
-#define S3C64XX_GPO4_EINT_G7_4 (0x03 << 8)
-
-#define S3C64XX_GPO5_EINT_G7_5 (0x03 << 10)
-
-#define S3C64XX_GPO6_MEM0_ADDR6 (0x02 << 12)
-#define S3C64XX_GPO6_EINT_G7_6 (0x03 << 12)
-
-#define S3C64XX_GPO7_MEM0_ADDR7 (0x02 << 14)
-#define S3C64XX_GPO7_EINT_G7_7 (0x03 << 14)
-
-#define S3C64XX_GPO8_MEM0_ADDR8 (0x02 << 16)
-#define S3C64XX_GPO8_EINT_G7_8 (0x03 << 16)
-
-#define S3C64XX_GPO9_MEM0_ADDR9 (0x02 << 18)
-#define S3C64XX_GPO9_EINT_G7_9 (0x03 << 18)
-
-#define S3C64XX_GPO10_MEM0_ADDR10 (0x02 << 20)
-#define S3C64XX_GPO10_EINT_G7_10 (0x03 << 20)
-
-#define S3C64XX_GPO11_MEM0_ADDR11 (0x02 << 22)
-#define S3C64XX_GPO11_EINT_G7_11 (0x03 << 22)
-
-#define S3C64XX_GPO12_MEM0_ADDR12 (0x02 << 24)
-#define S3C64XX_GPO12_EINT_G7_12 (0x03 << 24)
-
-#define S3C64XX_GPO13_MEM0_ADDR13 (0x02 << 26)
-#define S3C64XX_GPO13_EINT_G7_13 (0x03 << 26)
-
-#define S3C64XX_GPO14_MEM0_ADDR14 (0x02 << 28)
-#define S3C64XX_GPO14_EINT_G7_14 (0x03 << 28)
-
-#define S3C64XX_GPO15_MEM0_ADDR15 (0x02 << 30)
-#define S3C64XX_GPO15_EINT_G7_15 (0x03 << 30)
-
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h
deleted file mode 100644
index 46bcfb63b8d..00000000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank P register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPPCON (S3C64XX_GPP_BASE + 0x00)
-#define S3C64XX_GPPDAT (S3C64XX_GPP_BASE + 0x04)
-#define S3C64XX_GPPPUD (S3C64XX_GPP_BASE + 0x08)
-#define S3C64XX_GPPCONSLP (S3C64XX_GPP_BASE + 0x0c)
-#define S3C64XX_GPPPUDSLP (S3C64XX_GPP_BASE + 0x10)
-
-#define S3C64XX_GPP_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
-#define S3C64XX_GPP_INPUT(__gpio) (0x0 << ((__gpio) * 2))
-#define S3C64XX_GPP_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPP0_MEM0_ADDRV (0x02 << 0)
-#define S3C64XX_GPP0_EINT_G8_0 (0x03 << 0)
-
-#define S3C64XX_GPP1_MEM0_SMCLK (0x02 << 2)
-#define S3C64XX_GPP1_EINT_G8_1 (0x03 << 2)
-
-#define S3C64XX_GPP2_MEM0_nWAIT (0x02 << 4)
-#define S3C64XX_GPP2_EINT_G8_2 (0x03 << 4)
-
-#define S3C64XX_GPP3_MEM0_RDY0_ALE (0x02 << 6)
-#define S3C64XX_GPP3_EINT_G8_3 (0x03 << 6)
-
-#define S3C64XX_GPP4_MEM0_RDY1_CLE (0x02 << 8)
-#define S3C64XX_GPP4_EINT_G8_4 (0x03 << 8)
-
-#define S3C64XX_GPP5_MEM0_INTsm0_FWE (0x02 << 10)
-#define S3C64XX_GPP5_EINT_G8_5 (0x03 << 10)
-
-#define S3C64XX_GPP6_MEM0_(null) (0x02 << 12)
-#define S3C64XX_GPP6_EINT_G8_6 (0x03 << 12)
-
-#define S3C64XX_GPP7_MEM0_INTsm1_FRE (0x02 << 14)
-#define S3C64XX_GPP7_EINT_G8_7 (0x03 << 14)
-
-#define S3C64XX_GPP8_MEM0_RPn_RnB (0x02 << 16)
-#define S3C64XX_GPP8_EINT_G8_8 (0x03 << 16)
-
-#define S3C64XX_GPP9_MEM0_ATA_RESET (0x02 << 18)
-#define S3C64XX_GPP9_EINT_G8_9 (0x03 << 18)
-
-#define S3C64XX_GPP10_MEM0_ATA_INPACK (0x02 << 20)
-#define S3C64XX_GPP10_EINT_G8_10 (0x03 << 20)
-
-#define S3C64XX_GPP11_MEM0_ATA_REG (0x02 << 22)
-#define S3C64XX_GPP11_EINT_G8_11 (0x03 << 22)
-
-#define S3C64XX_GPP12_MEM0_ATA_WE (0x02 << 24)
-#define S3C64XX_GPP12_EINT_G8_12 (0x03 << 24)
-
-#define S3C64XX_GPP13_MEM0_ATA_OE (0x02 << 26)
-#define S3C64XX_GPP13_EINT_G8_13 (0x03 << 26)
-
-#define S3C64XX_GPP14_MEM0_ATA_CD (0x02 << 28)
-#define S3C64XX_GPP14_EINT_G8_14 (0x03 << 28)
-
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h
deleted file mode 100644
index 1712223487b..00000000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank Q register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPQCON (S3C64XX_GPQ_BASE + 0x00)
-#define S3C64XX_GPQDAT (S3C64XX_GPQ_BASE + 0x04)
-#define S3C64XX_GPQPUD (S3C64XX_GPQ_BASE + 0x08)
-#define S3C64XX_GPQCONSLP (S3C64XX_GPQ_BASE + 0x0c)
-#define S3C64XX_GPQPUDSLP (S3C64XX_GPQ_BASE + 0x10)
-
-#define S3C64XX_GPQ_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
-#define S3C64XX_GPQ_INPUT(__gpio) (0x0 << ((__gpio) * 2))
-#define S3C64XX_GPQ_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPQ0_MEM0_ADDR18_RAS (0x02 << 0)
-#define S3C64XX_GPQ0_EINT_G9_0 (0x03 << 0)
-
-#define S3C64XX_GPQ1_MEM0_ADDR19_CAS (0x02 << 2)
-#define S3C64XX_GPQ1_EINT_G9_1 (0x03 << 2)
-
-#define S3C64XX_GPQ2_EINT_G9_2 (0x03 << 4)
-
-#define S3C64XX_GPQ3_EINT_G9_3 (0x03 << 6)
-
-#define S3C64XX_GPQ4_EINT_G9_4 (0x03 << 8)
-
-#define S3C64XX_GPQ5_EINT_G9_5 (0x03 << 10)
-
-#define S3C64XX_GPQ6_EINT_G9_6 (0x03 << 12)
-
-#define S3C64XX_GPQ7_MEM0_ADDR17_WENDMC (0x02 << 14)
-#define S3C64XX_GPQ7_EINT_G9_7 (0x03 << 14)
-
-#define S3C64XX_GPQ8_MEM0_ADDR16_APDMC (0x02 << 16)
-#define S3C64XX_GPQ8_EINT_G9_8 (0x03 << 16)
-
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 686a4f270b1..2c0353a8090 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -50,7 +50,6 @@
#include <mach/hardware.h>
#include <mach/regs-fb.h>
#include <mach/map.h>
-#include <mach/gpio-bank-f.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index 79412f735a8..bc1c470b7de 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -30,26 +30,18 @@
#include <mach/regs-gpio-memport.h>
#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
-#include <mach/gpio-bank-n.h>
-
void s3c_pm_debug_smdkled(u32 set, u32 clear)
{
unsigned long flags;
- u32 reg;
+ int i;
local_irq_save(flags);
- reg = __raw_readl(S3C64XX_GPNCON);
- reg &= ~(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) |
- S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15));
- reg |= S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) |
- S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15);
- __raw_writel(reg, S3C64XX_GPNCON);
-
- reg = __raw_readl(S3C64XX_GPNDAT);
- reg &= ~(clear << 12);
- reg |= set << 12;
- __raw_writel(reg, S3C64XX_GPNDAT);
-
+ for (i = 0; i < 4; i++) {
+ if (clear & (1 << i))
+ gpio_set_value(S3C64XX_GPN(12 + i), 0);
+ if (set & (1 << i))
+ gpio_set_value(S3C64XX_GPN(12 + i), 1);
+ }
local_irq_restore(flags);
}
#endif
@@ -187,6 +179,18 @@ static int s3c64xx_pm_init(void)
pm_cpu_prep = s3c64xx_pm_prepare;
pm_cpu_sleep = s3c64xx_cpu_suspend;
pm_uart_udivslot = 1;
+
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+ gpio_request(S3C64XX_GPN(12), "DEBUG_LED0");
+ gpio_request(S3C64XX_GPN(13), "DEBUG_LED1");
+ gpio_request(S3C64XX_GPN(14), "DEBUG_LED2");
+ gpio_request(S3C64XX_GPN(15), "DEBUG_LED3");
+ gpio_direction_output(S3C64XX_GPN(12), 0);
+ gpio_direction_output(S3C64XX_GPN(13), 0);
+ gpio_direction_output(S3C64XX_GPN(14), 0);
+ gpio_direction_output(S3C64XX_GPN(15), 0);
+#endif
+
return 0;
}
diff --git a/arch/arm/mach-s3c64xx/setup-i2c0.c b/arch/arm/mach-s3c64xx/setup-i2c0.c
index 406192a43c6..241af94a9e7 100644
--- a/arch/arm/mach-s3c64xx/setup-i2c0.c
+++ b/arch/arm/mach-s3c64xx/setup-i2c0.c
@@ -18,14 +18,11 @@
struct platform_device; /* don't need the contents */
-#include <mach/gpio-bank-b.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
- s3c_gpio_cfgpin(S3C64XX_GPB(5), S3C64XX_GPB5_I2C_SCL0);
- s3c_gpio_cfgpin(S3C64XX_GPB(6), S3C64XX_GPB6_I2C_SDA0);
- s3c_gpio_setpull(S3C64XX_GPB(5), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S3C64XX_GPB(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S3C64XX_GPB(5), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
}
diff --git a/arch/arm/mach-s3c64xx/setup-i2c1.c b/arch/arm/mach-s3c64xx/setup-i2c1.c
index 1ee62c97cd7..3d13a961986 100644
--- a/arch/arm/mach-s3c64xx/setup-i2c1.c
+++ b/arch/arm/mach-s3c64xx/setup-i2c1.c
@@ -18,14 +18,11 @@
struct platform_device; /* don't need the contents */
-#include <mach/gpio-bank-b.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
{
- s3c_gpio_cfgpin(S3C64XX_GPB(2), S3C64XX_GPB2_I2C_SCL1);
- s3c_gpio_cfgpin(S3C64XX_GPB(3), S3C64XX_GPB3_I2C_SDA1);
- s3c_gpio_setpull(S3C64XX_GPB(2), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S3C64XX_GPB(3), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S3C64XX_GPB(2), 2,
+ S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP);
}
diff --git a/arch/arm/mach-s3c64xx/sleep.S b/arch/arm/mach-s3c64xx/sleep.S
index afe5a762f46..1f87732b232 100644
--- a/arch/arm/mach-s3c64xx/sleep.S
+++ b/arch/arm/mach-s3c64xx/sleep.S
@@ -20,7 +20,6 @@
#define S3C64XX_VA_GPIO (0x0)
#include <mach/regs-gpio.h>
-#include <mach/gpio-bank-n.h>
#define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT))
@@ -68,6 +67,13 @@ ENTRY(s3c_cpu_resume)
ldr r2, =LL_UART /* for debug */
#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+
+#define S3C64XX_GPNCON (S3C64XX_GPN_BASE + 0x00)
+#define S3C64XX_GPNDAT (S3C64XX_GPN_BASE + 0x04)
+
+#define S3C64XX_GPN_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
+#define S3C64XX_GPN_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
+
/* Initialise the GPIO state if we are debugging via the SMDK LEDs,
* as the uboot version supplied resets these to inputs during the
* resume checks.
--
cgit v1.2.3-18-g5258
From 5a9f68fd2608384e09e18767ebc253d7aee86b34 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Wed, 6 Apr 2011 17:24:31 +0000
Subject: DA8xx: kill duplicate #define DA8XX_GPIO_BASE
DA8XX_GPIO_BASE is #define'd in both <mach/da8xx.h> and devices-da8xx.c;
moreover, it's not even used in the latter file...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
---
arch/arm/mach-davinci/devices-da8xx.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 58a02dc7b15..feffafa121e 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -36,7 +36,6 @@
#define DA8XX_EMAC_CPGMACSS_BASE 0x01e22000
#define DA8XX_EMAC_CPGMAC_BASE 0x01e23000
#define DA8XX_EMAC_MDIO_BASE 0x01e24000
-#define DA8XX_GPIO_BASE 0x01e26000
#define DA8XX_I2C1_BASE 0x01e28000
#define DA8XX_SPI0_BASE 0x01c41000
#define DA830_SPI1_BASE 0x01e12000
--
cgit v1.2.3-18-g5258
From e0c199d0989e2f9fa2683e817624779f55abfa7f Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Wed, 6 Apr 2011 17:26:06 +0000
Subject: DA8xx: kill duplicate #define DA8XX_PLL1_BASE
Commit 044ca01521d077a35b46a445b02b93f413109a4b (davinci: da850/omap-l138: add
support for SoC suspend) introduced DA8XX_PLL1_BASE despite PLL1 exists only on
DA850/OMAP-L138 and da850.c even already #define'd DA850_PLL1_BASE. Kill the
duplicate macro, renaming an existing reference to it...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
---
arch/arm/mach-davinci/da850.c | 2 +-
arch/arm/mach-davinci/include/mach/da8xx.h | 1 -
2 files changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index b95b9196dee..133aac40585 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -1055,7 +1055,7 @@ int da850_register_pm(struct platform_device *pdev)
if (!pdata->cpupll_reg_base)
return -ENOMEM;
- pdata->ddrpll_reg_base = ioremap(DA8XX_PLL1_BASE, SZ_4K);
+ pdata->ddrpll_reg_base = ioremap(DA850_PLL1_BASE, SZ_4K);
if (!pdata->ddrpll_reg_base) {
ret = -ENOMEM;
goto no_ddrpll_mem;
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index e4fc1af8500..2897014a7e5 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -65,7 +65,6 @@ extern unsigned int da850_max_speed;
#define DA8XX_GPIO_BASE 0x01e26000
#define DA8XX_PSC1_BASE 0x01e27000
#define DA8XX_LCD_CNTRL_BASE 0x01e13000
-#define DA8XX_PLL1_BASE 0x01e1a000
#define DA8XX_MMCSD0_BASE 0x01c40000
#define DA8XX_AEMIF_CS2_BASE 0x60000000
#define DA8XX_AEMIF_CS3_BASE 0x62000000
--
cgit v1.2.3-18-g5258
From 8ac764e3479f6057c1cc85bd960dd2aa0fb82fea Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Wed, 6 Apr 2011 17:29:24 +0000
Subject: DA8xx: move base address #define's to their proper place
Move DA8XX_MMCSD0_BASE, DA8XX_LCD_CNTRL_BASE, and DA8XX_DDR2_CTL_BASE from
<mach/da8xx.h> to devices-da8xx.c as the latter file is the only place where
these macros are used.
While at it, restore sorting the base address macros by address value in
devices-da8xx.c...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
---
arch/arm/mach-davinci/devices-da8xx.c | 15 +++++++++------
arch/arm/mach-davinci/include/mach/da8xx.h | 3 ---
2 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index feffafa121e..4e66881c7ae 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -24,22 +24,25 @@
#include "clock.h"
#define DA8XX_TPCC_BASE 0x01c00000
-#define DA850_MMCSD1_BASE 0x01e1b000
-#define DA850_TPCC1_BASE 0x01e30000
#define DA8XX_TPTC0_BASE 0x01c08000
#define DA8XX_TPTC1_BASE 0x01c08400
-#define DA850_TPTC2_BASE 0x01e38000
#define DA8XX_WDOG_BASE 0x01c21000 /* DA8XX_TIMER64P1_BASE */
#define DA8XX_I2C0_BASE 0x01c22000
-#define DA8XX_RTC_BASE 0x01C23000
+#define DA8XX_RTC_BASE 0x01c23000
+#define DA8XX_MMCSD0_BASE 0x01c40000
+#define DA8XX_SPI0_BASE 0x01c41000
+#define DA830_SPI1_BASE 0x01e12000
+#define DA8XX_LCD_CNTRL_BASE 0x01e13000
+#define DA850_MMCSD1_BASE 0x01e1b000
#define DA8XX_EMAC_CPPI_PORT_BASE 0x01e20000
#define DA8XX_EMAC_CPGMACSS_BASE 0x01e22000
#define DA8XX_EMAC_CPGMAC_BASE 0x01e23000
#define DA8XX_EMAC_MDIO_BASE 0x01e24000
#define DA8XX_I2C1_BASE 0x01e28000
-#define DA8XX_SPI0_BASE 0x01c41000
-#define DA830_SPI1_BASE 0x01e12000
+#define DA850_TPCC1_BASE 0x01e30000
+#define DA850_TPTC2_BASE 0x01e38000
#define DA850_SPI1_BASE 0x01f0e000
+#define DA8XX_DDR2_CTL_BASE 0xb0000000
#define DA8XX_EMAC_CTRL_REG_OFFSET 0x3000
#define DA8XX_EMAC_MOD_REG_OFFSET 0x2000
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 2897014a7e5..ad64da713fc 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -64,12 +64,9 @@ extern unsigned int da850_max_speed;
#define DA8XX_TIMER64P1_BASE 0x01c21000
#define DA8XX_GPIO_BASE 0x01e26000
#define DA8XX_PSC1_BASE 0x01e27000
-#define DA8XX_LCD_CNTRL_BASE 0x01e13000
-#define DA8XX_MMCSD0_BASE 0x01c40000
#define DA8XX_AEMIF_CS2_BASE 0x60000000
#define DA8XX_AEMIF_CS3_BASE 0x62000000
#define DA8XX_AEMIF_CTL_BASE 0x68000000
-#define DA8XX_DDR2_CTL_BASE 0xb0000000
#define DA8XX_ARM_RAM_BASE 0xffff0000
void __init da830_init(void);
--
cgit v1.2.3-18-g5258
From 85f60ae4ee817174b0f78928bc7066f28c3551ab Mon Sep 17 00:00:00 2001
From: Grant Likely <grant.likely@secretlab.ca>
Date: Fri, 29 Apr 2011 00:18:16 -0600
Subject: dt/flattree: explicitly pass command line pointer to
early_init_dt_scan_chosen
This patch drops the reference to a global 'cmd_line' variable from
early_init_dt_scan_chosen, and instead passes the pointer to the command
line string via the *data argument. Each architecture does something
slightly different with the initial command line, so it makes sense for
the architecture to be able to specify the variable name.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
arch/microblaze/kernel/prom.c | 2 +-
arch/mips/include/asm/prom.h | 3 ---
arch/mips/kernel/prom.c | 3 ++-
arch/powerpc/kernel/prom.c | 2 +-
drivers/of/fdt.c | 8 ++++----
5 files changed, 8 insertions(+), 10 deletions(-)
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index 00ee90f0834..b15cc219b1d 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -130,7 +130,7 @@ void __init early_init_devtree(void *params)
* device-tree, including the platform type, initrd location and
* size, TCE reserve, and more ...
*/
- of_scan_flat_dt(early_init_dt_scan_chosen, NULL);
+ of_scan_flat_dt(early_init_dt_scan_chosen, cmd_line);
/* Scan memory nodes and rebuild MEMBLOCKs */
memblock_init();
diff --git a/arch/mips/include/asm/prom.h b/arch/mips/include/asm/prom.h
index f29b862d9db..857d9b7858a 100644
--- a/arch/mips/include/asm/prom.h
+++ b/arch/mips/include/asm/prom.h
@@ -14,9 +14,6 @@
#ifdef CONFIG_OF
#include <asm/bootinfo.h>
-/* which is compatible with the flattened device tree (FDT) */
-#define cmd_line arcs_cmdline
-
extern int early_init_dt_scan_memory_arch(unsigned long node,
const char *uname, int depth, void *data);
diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c
index a19811e98a4..5b7eade41fa 100644
--- a/arch/mips/kernel/prom.c
+++ b/arch/mips/kernel/prom.c
@@ -83,7 +83,8 @@ void __init early_init_devtree(void *params)
* device-tree, including the platform type, initrd location and
* size, and more ...
*/
- of_scan_flat_dt(early_init_dt_scan_chosen, NULL);
+ of_scan_flat_dt(early_init_dt_scan_chosen, arcs_cmdline);
+
/* Scan memory nodes */
of_scan_flat_dt(early_init_dt_scan_root, NULL);
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index e74fa12afc8..c173bee09ce 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -691,7 +691,7 @@ void __init early_init_devtree(void *params)
* device-tree, including the platform type, initrd location and
* size, TCE reserve, and more ...
*/
- of_scan_flat_dt(early_init_dt_scan_chosen_ppc, NULL);
+ of_scan_flat_dt(early_init_dt_scan_chosen_ppc, cmd_line);
/* Scan memory nodes and rebuild MEMBLOCKs */
memblock_init();
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 8b63a691a9e..65200af29c5 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -670,7 +670,7 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname,
pr_debug("search \"chosen\", depth: %d, uname: %s\n", depth, uname);
- if (depth != 1 ||
+ if (depth != 1 || !data ||
(strcmp(uname, "chosen") != 0 && strcmp(uname, "chosen@0") != 0))
return 0;
@@ -679,16 +679,16 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname,
/* Retrieve command line */
p = of_get_flat_dt_prop(node, "bootargs", &l);
if (p != NULL && l > 0)
- strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE));
+ strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE));
#ifdef CONFIG_CMDLINE
#ifndef CONFIG_CMDLINE_FORCE
if (p == NULL || l == 0 || (l == 1 && (*p) == 0))
#endif
- strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
+ strlcpy(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
#endif /* CONFIG_CMDLINE */
- pr_debug("Command line is: %s\n", cmd_line);
+ pr_debug("Command line is: %s\n", (char*)data);
/* break now */
return 1;
--
cgit v1.2.3-18-g5258
--
cgit v1.2.3-18-g5258
From 4c2896e88d976d0e5b2213c64cde885f5677fa2b Mon Sep 17 00:00:00 2001
From: Grant Likely <grant.likely@secretlab.ca>
Date: Thu, 28 Apr 2011 14:27:20 -0600
Subject: arm/dt: Make __vet_atags also accept a dtb image
The dtb is passed to the kernel via register r2, which is the same
method that is used to pass an atags pointer. This patch modifies
__vet_atags to not clear r2 when it encounters a dtb image.
v2: fixed bugs pointed out by Nicolas Pitre
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
arch/arm/kernel/head-common.S | 24 ++++++++++++++++++------
arch/arm/kernel/head.S | 8 ++++----
2 files changed, 22 insertions(+), 10 deletions(-)
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index c84b57d27d0..854bd22380d 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -15,6 +15,12 @@
#define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
#define ATAG_CORE_SIZE_EMPTY ((2*4) >> 2)
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#define OF_DT_MAGIC 0xd00dfeed
+#else
+#define OF_DT_MAGIC 0xedfe0dd0 /* 0xd00dfeed in big-endian */
+#endif
+
/*
* Exception handling. Something went wrong and we can't proceed. We
* ought to tell the user, but since we don't have any guarantee that
@@ -28,20 +34,26 @@
/* Determine validity of the r2 atags pointer. The heuristic requires
* that the pointer be aligned, in the first 16k of physical RAM and
- * that the ATAG_CORE marker is first and present. Future revisions
+ * that the ATAG_CORE marker is first and present. If CONFIG_OF_FLATTREE
+ * is selected, then it will also accept a dtb pointer. Future revisions
* of this function may be more lenient with the physical address and
* may also be able to move the ATAGS block if necessary.
*
* Returns:
- * r2 either valid atags pointer, or zero
+ * r2 either valid atags pointer, valid dtb pointer, or zero
* r5, r6 corrupted
*/
__vet_atags:
tst r2, #0x3 @ aligned?
bne 1f
- ldr r5, [r2, #0] @ is first tag ATAG_CORE?
- cmp r5, #ATAG_CORE_SIZE
+ ldr r5, [r2, #0]
+#ifdef CONFIG_OF_FLATTREE
+ ldr r6, =OF_DT_MAGIC @ is it a DTB?
+ cmp r5, r6
+ beq 2f
+#endif
+ cmp r5, #ATAG_CORE_SIZE @ is first tag ATAG_CORE?
cmpne r5, #ATAG_CORE_SIZE_EMPTY
bne 1f
ldr r5, [r2, #4]
@@ -49,7 +61,7 @@ __vet_atags:
cmp r5, r6
bne 1f
- mov pc, lr @ atag pointer is ok
+2: mov pc, lr @ atag/dtb pointer is ok
1: mov r2, #0
mov pc, lr
@@ -61,7 +73,7 @@ ENDPROC(__vet_atags)
*
* r0 = cp#15 control register
* r1 = machine ID
- * r2 = atags pointer
+ * r2 = atags/dtb pointer
* r9 = processor ID
*/
__INIT
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index c9173cfbbc7..a5e5c5b9b48 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -59,7 +59,7 @@
*
* This is normally called from the decompressor code. The requirements
* are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0,
- * r1 = machine nr, r2 = atags pointer.
+ * r1 = machine nr, r2 = atags or dtb pointer.
*
* This code is mostly position independent, so if you link the kernel at
* 0xc0008000, you call this at __pa(0xc0008000).
@@ -91,7 +91,7 @@ ENTRY(stext)
#endif
/*
- * r1 = machine no, r2 = atags,
+ * r1 = machine no, r2 = atags or dtb,
* r8 = phys_offset, r9 = cpuid, r10 = procinfo
*/
bl __vet_atags
@@ -339,7 +339,7 @@ __secondary_data:
*
* r0 = cp#15 control register
* r1 = machine ID
- * r2 = atags pointer
+ * r2 = atags or dtb pointer
* r4 = page table pointer
* r9 = processor ID
* r13 = *virtual* address to jump to upon completion
@@ -376,7 +376,7 @@ ENDPROC(__enable_mmu)
*
* r0 = cp#15 control register
* r1 = machine ID
- * r2 = atags pointer
+ * r2 = atags or dtb pointer
* r9 = processor ID
* r13 = *virtual* address to jump to upon completion
*
--
cgit v1.2.3-18-g5258
From 9eb8f6743b076b67f00776cda4330c802e157b41 Mon Sep 17 00:00:00 2001
From: Grant Likely <grant.likely@secretlab.ca>
Date: Thu, 28 Apr 2011 14:27:20 -0600
Subject: arm/dt: Allow CONFIG_OF on ARM
Add some basic empty infrastructure for DT support on ARM.
v5: - Fix off-by-one error in size calculation of initrd
- Stop mucking with cmd_line, and load command line from dt into
boot_command_line instead which matches the behaviour of ATAGS booting
v3: - moved cmd_line export and initrd setup to this patch to make the
series bisectable.
- switched to alloc_bootmem_align() for allocation when
unflattening the device tree. memblock_alloc() was not the
right interface.
Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
arch/arm/Kconfig | 7 +++++++
arch/arm/include/asm/prom.h | 25 +++++++++++++++++++++++
arch/arm/include/asm/setup.h | 2 ++
arch/arm/kernel/Makefile | 1 +
arch/arm/kernel/devtree.c | 47 ++++++++++++++++++++++++++++++++++++++++++++
arch/arm/kernel/setup.c | 2 +-
arch/arm/mm/init.c | 9 +++++++++
7 files changed, 92 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/include/asm/prom.h
create mode 100644 arch/arm/kernel/devtree.c
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 377a7a595b0..efc7f3c87f1 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1687,6 +1687,13 @@ endmenu
menu "Boot options"
+config USE_OF
+ bool "Flattened Device Tree support"
+ select OF
+ select OF_EARLY_FLATTREE
+ help
+ Include support for flattened device tree machine descriptions.
+
# Compressed boot loader in ROM. Yes, we really want to ask about
# TEXT and BSS so we preserve their values in the config files.
config ZBOOT_ROM_TEXT
diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h
new file mode 100644
index 00000000000..8f1037fdc08
--- /dev/null
+++ b/arch/arm/include/asm/prom.h
@@ -0,0 +1,25 @@
+/*
+ * arch/arm/include/asm/prom.h
+ *
+ * Copyright (C) 2009 Canonical Ltd. <jeremy.kerr@canonical.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __ASMARM_PROM_H
+#define __ASMARM_PROM_H
+
+#ifdef CONFIG_OF
+
+#include <asm/setup.h>
+#include <asm/irq.h>
+
+static inline void irq_dispose_mapping(unsigned int virq)
+{
+ return;
+}
+
+#endi