From 21278aeafbfacfd62b3e613525f0c694a029dac1 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 10 Jun 2014 09:06:10 -0500 Subject: ARM: use menuconfig for sub-arch menus The System Type menu is getting quite long with platforms and is inconsistent in handling of sub-arch specific options. Tidy up the menu by making platform options a menuconfig entry containing any platform specific config items. [arnd: change OMAP part according to suggestion from Tony Lindgren ] Signed-off-by: Rob Herring Signed-off-by: Arnd Bergmann --- arch/arm/mach-bcm/Kconfig | 7 +++---- arch/arm/mach-berlin/Kconfig | 6 +----- arch/arm/mach-cns3xxx/Kconfig | 7 +++---- arch/arm/mach-exynos/Kconfig | 6 +----- arch/arm/mach-imx/Kconfig | 7 +++---- arch/arm/mach-moxart/Kconfig | 2 +- arch/arm/mach-mvebu/Kconfig | 6 +----- arch/arm/mach-nomadik/Kconfig | 4 +--- arch/arm/mach-omap2/Kconfig | 5 +++++ arch/arm/mach-prima2/Kconfig | 6 ++---- arch/arm/mach-qcom/Kconfig | 6 +----- arch/arm/mach-shmobile/Kconfig | 4 ++-- arch/arm/mach-sti/Kconfig | 2 +- arch/arm/mach-tegra/Kconfig | 7 +++---- arch/arm/mach-u300/Kconfig | 6 +----- arch/arm/mach-ux500/Kconfig | 6 +----- arch/arm/mach-vexpress/Kconfig | 7 +++---- 17 files changed, 33 insertions(+), 61 deletions(-) diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index 9bc6db1c134..41c839167e8 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -1,10 +1,9 @@ -config ARCH_BCM +menuconfig ARCH_BCM bool "Broadcom SoC Support" if ARCH_MULTI_V6_V7 help This enables support for Broadcom ARM based SoC chips -menu "Broadcom SoC Selection" - depends on ARCH_BCM +if ARCH_BCM config ARCH_BCM_MOBILE bool "Broadcom Mobile SoC Support" if ARCH_MULTI_V7 @@ -88,4 +87,4 @@ config ARCH_BCM_5301X different SoC or with the older BCM47XX and BCM53XX based network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx -endmenu +endif diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig index 101e0f35673..2631cfc5ab0 100644 --- a/arch/arm/mach-berlin/Kconfig +++ b/arch/arm/mach-berlin/Kconfig @@ -1,4 +1,4 @@ -config ARCH_BERLIN +menuconfig ARCH_BERLIN bool "Marvell Berlin SoCs" if ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB select ARM_GIC @@ -9,8 +9,6 @@ config ARCH_BERLIN if ARCH_BERLIN -menu "Marvell Berlin SoC variants" - config MACH_BERLIN_BG2 bool "Marvell Armada 1500 (BG2)" select CACHE_L2X0 @@ -30,6 +28,4 @@ config MACH_BERLIN_BG2Q select HAVE_ARM_TWD if SMP select PINCTRL_BERLIN_BG2Q -endmenu - endif diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig index 66838f42037..3c22a1990ec 100644 --- a/arch/arm/mach-cns3xxx/Kconfig +++ b/arch/arm/mach-cns3xxx/Kconfig @@ -1,12 +1,11 @@ -config ARCH_CNS3XXX +menuconfig ARCH_CNS3XXX bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6 select ARM_GIC select PCI_DOMAINS if PCI help Support for Cavium Networks CNS3XXX platform. -menu "CNS3XXX platform type" - depends on ARCH_CNS3XXX +if ARCH_CNS3XXX config MACH_CNS3420VB bool "Support for CNS3420 Validation Board" @@ -17,4 +16,4 @@ config MACH_CNS3420VB This is a platform with an on-board ARM11 MPCore and has support for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, etc. -endmenu +endif diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 845031b5082..8f9b66c4ac7 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -7,7 +7,7 @@ # Configuration options for the EXYNOS4 -config ARCH_EXYNOS +menuconfig ARCH_EXYNOS bool "Samsung EXYNOS" if ARCH_MULTI_V7 select ARCH_HAS_BANDGAP select ARCH_HAS_HOLES_MEMORYMODEL @@ -29,8 +29,6 @@ config ARCH_EXYNOS if ARCH_EXYNOS -menu "SAMSUNG EXYNOS SoCs Support" - config ARCH_EXYNOS3 bool "SAMSUNG EXYNOS3" select ARM_CPU_SUSPEND if PM @@ -117,8 +115,6 @@ config SOC_EXYNOS5800 default y depends on SOC_EXYNOS5420 -endmenu - config EXYNOS5420_MCPM bool "Exynos5420 Multi-Cluster PM support" depends on MCPM && SOC_EXYNOS5420 diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index b2323403ea2..28fa2fa49e5 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -1,4 +1,4 @@ -config ARCH_MXC +menuconfig ARCH_MXC bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 select ARCH_HAS_OPP select ARCH_REQUIRE_GPIOLIB @@ -12,8 +12,7 @@ config ARCH_MXC help Support for Freescale MXC/iMX-based family of processors -menu "Freescale i.MX support" - depends on ARCH_MXC +if ARCH_MXC config MXC_TZIC bool @@ -783,4 +782,4 @@ endif source "arch/arm/mach-imx/devices/Kconfig" -endmenu +endif diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig index 82a4ba8578a..f49328c39be 100644 --- a/arch/arm/mach-moxart/Kconfig +++ b/arch/arm/mach-moxart/Kconfig @@ -1,4 +1,4 @@ -config ARCH_MOXART +menuconfig ARCH_MOXART bool "MOXA ART SoC" if ARCH_MULTI_V4 select CPU_FA526 select ARM_DMA_MEM_BUFFERABLE diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index c8bef39ec19..4a7c250c9a3 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -1,4 +1,4 @@ -config ARCH_MVEBU +menuconfig ARCH_MVEBU bool "Marvell Engineering Business Unit (MVEBU) SoCs" if (ARCH_MULTI_V7 || ARCH_MULTI_V5) select ARCH_SUPPORTS_BIG_ENDIAN select CLKSRC_MMIO @@ -13,8 +13,6 @@ config ARCH_MVEBU if ARCH_MVEBU -menu "Marvell EBU SoC variants" - config MACH_MVEBU_V7 bool select ARMADA_370_XP_TIMER @@ -96,6 +94,4 @@ config MACH_KIRKWOOD Say 'Y' here if you want your kernel to support boards based on the Marvell Kirkwood device tree. -endmenu - endif diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig index 486d301f43f..3c61096c862 100644 --- a/arch/arm/mach-nomadik/Kconfig +++ b/arch/arm/mach-nomadik/Kconfig @@ -1,4 +1,4 @@ -config ARCH_NOMADIK +menuconfig ARCH_NOMADIK bool "ST-Ericsson Nomadik" depends on ARCH_MULTI_V5 select ARCH_REQUIRE_GPIOLIB @@ -15,7 +15,6 @@ config ARCH_NOMADIK Support for the Nomadik platform by ST-Ericsson if ARCH_NOMADIK -menu "Nomadik boards" config MACH_NOMADIK_8815NHK bool "ST 8815 Nomadik Hardware Kit (evaluation board)" @@ -24,7 +23,6 @@ config MACH_NOMADIK_8815NHK select I2C_ALGOBIT select I2C_NOMADIK -endmenu endif config NOMADIK_8815 diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 000601255f2..062505345c9 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -1,3 +1,6 @@ +menu "TI OMAP/AM/DM/DRA Family" + depends on ARCH_MULTI_V6 || ARCH_MULTI_V7 + config ARCH_OMAP bool @@ -341,3 +344,5 @@ config OMAP4_ERRATA_I688 endmenu endif + +endmenu diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig index e4e505f52ba..042f693ef42 100644 --- a/arch/arm/mach-prima2/Kconfig +++ b/arch/arm/mach-prima2/Kconfig @@ -1,4 +1,4 @@ -config ARCH_SIRF +menuconfig ARCH_SIRF bool "CSR SiRF" if ARCH_MULTI_V7 select ARCH_HAS_RESET_CONTROLLER select ARCH_REQUIRE_GPIOLIB @@ -11,7 +11,7 @@ config ARCH_SIRF if ARCH_SIRF -menu "CSR SiRF atlas6/primaII/Marco/Polo Specific Features" +comment "CSR SiRF atlas6/primaII/Marco/Polo Specific Features" config ARCH_ATLAS6 bool "CSR SiRFSoC ATLAS6 ARM Cortex A9 Platform" @@ -37,8 +37,6 @@ config ARCH_MARCO help Support for CSR SiRFSoC ARM Cortex A9 Platform -endmenu - config SIRF_IRQ bool diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig index fd2b99dceb8..ee5697ba05b 100644 --- a/arch/arm/mach-qcom/Kconfig +++ b/arch/arm/mach-qcom/Kconfig @@ -1,4 +1,4 @@ -config ARCH_QCOM +menuconfig ARCH_QCOM bool "Qualcomm Support" if ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB select ARM_GIC @@ -11,8 +11,6 @@ config ARCH_QCOM if ARCH_QCOM -menu "Qualcomm SoC Selection" - config ARCH_MSM8X60 bool "Enable support for MSM8X60" select CLKSRC_QCOM @@ -25,8 +23,6 @@ config ARCH_MSM8974 bool "Enable support for MSM8974" select HAVE_ARM_ARCH_TIMER -endmenu - config QCOM_SCM bool diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 270e5caf3c9..798073057e5 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -1,7 +1,7 @@ config ARCH_SHMOBILE bool -config ARCH_SHMOBILE_MULTI +menuconfig ARCH_SHMOBILE_MULTI bool "Renesas ARM SoCs" if ARCH_MULTI_V7 depends on MMU select ARCH_SHMOBILE @@ -15,7 +15,7 @@ config ARCH_SHMOBILE_MULTI if ARCH_SHMOBILE_MULTI -comment "Renesas ARM SoCs System Type" +#comment "Renesas ARM SoCs System Type" config ARCH_EMEV2 bool "Emma Mobile EV2" diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig index abf9ee9bbc3..7e33e9d2c42 100644 --- a/arch/arm/mach-sti/Kconfig +++ b/arch/arm/mach-sti/Kconfig @@ -1,5 +1,5 @@ menuconfig ARCH_STI - bool "STMicroelectronics Consumer Electronics SOCs with Device Trees" if ARCH_MULTI_V7 + bool "STMicroelectronics Consumer Electronics SOCs" if ARCH_MULTI_V7 select ARM_GIC select ARM_GLOBAL_TIMER select PINCTRL diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 8981ed49787..095399618ca 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -1,4 +1,4 @@ -config ARCH_TEGRA +menuconfig ARCH_TEGRA bool "NVIDIA Tegra" if ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS @@ -15,8 +15,7 @@ config ARCH_TEGRA help This enables support for NVIDIA Tegra based systems. -menu "NVIDIA Tegra options" - depends on ARCH_TEGRA +if ARCH_TEGRA config ARCH_TEGRA_2x_SOC bool "Enable support for Tegra20 family" @@ -68,4 +67,4 @@ config TEGRA_AHB which controls AHB bus master arbitration and some performance parameters(priority, prefech size). -endmenu +endif diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig index e3a96d7302e..bc51a71394a 100644 --- a/arch/arm/mach-u300/Kconfig +++ b/arch/arm/mach-u300/Kconfig @@ -1,4 +1,4 @@ -config ARCH_U300 +menuconfig ARCH_U300 bool "ST-Ericsson U300 Series" if ARCH_MULTI_V5 depends on MMU select ARCH_REQUIRE_GPIOLIB @@ -16,8 +16,6 @@ config ARCH_U300 if ARCH_U300 -menu "ST-Ericsson AB U300/U335 Platform" - config MACH_U300 depends on ARCH_U300 bool "U300" @@ -43,6 +41,4 @@ config MACH_U300_SPIDUMMY you don't need it. Selecting this will activate the SPI framework and ARM PL022 support. -endmenu - endif diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 9b93144c1c2..5be7c4583a9 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -1,4 +1,4 @@ -config ARCH_U8500 +menuconfig ARCH_U8500 bool "ST-Ericsson U8500 Series" if ARCH_MULTI_V7 depends on MMU select AB8500_CORE @@ -33,8 +33,6 @@ config UX500_SOC_DB8500 select REGULATOR select REGULATOR_DB8500_PRCMU -menu "Ux500 target platform (boards)" - config MACH_MOP500 bool "U8500 Development platform, MOP500 versions" select I2C @@ -67,8 +65,6 @@ config UX500_AUTO_PLATFORM a working kernel. If everything else is disabled, this automatically enables MACH_MOP500. -endmenu - config UX500_DEBUG_UART int "Ux500 UART to use for low-level debug" default 2 diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 2e2e8bbb88d..99c1f151c40 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -1,4 +1,4 @@ -config ARCH_VEXPRESS +menuconfig ARCH_VEXPRESS bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB select ARCH_SUPPORTS_BIG_ENDIAN @@ -37,8 +37,7 @@ config ARCH_VEXPRESS platforms. The traditional (ATAGs) boot method is not usable on these boards with this option. -menu "Versatile Express platform type" - depends on ARCH_VEXPRESS +if ARCH_VEXPRESS config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA bool "Enable A5 and A9 only errata work-arounds" @@ -82,4 +81,4 @@ config ARCH_VEXPRESS_TC2_PM Support for CPU and cluster power management on Versatile Express with a TC2 (A15x2 A7x3) big.LITTLE core tile. -endmenu +endif -- cgit v1.2.3-18-g5258