From 0fffed27f92d9d7a34de9fe017b7082b5958bb93 Mon Sep 17 00:00:00 2001 From: Joonyoung Shim Date: Wed, 21 Jul 2010 00:45:10 -0700 Subject: Input: samsung-keypad - Add samsung keypad driver This patch adds support for keypad driver running on Samsung cpus. This driver is tested on GONI and Aquila board using S5PC110 cpu. [ch.naveen@samsung.com: tested on SMDK6410, SMDKC100, and SMDKV210] Signed-off-by: Joonyoung Shim Signed-off-by: Kyungmin Park Tested-by: Naveen Krishna Ch Acked-by: Kukjin Kim Signed-off-by: Dmitry Torokhov --- arch/arm/plat-samsung/include/plat/keypad.h | 43 +++ drivers/input/keyboard/Kconfig | 9 + drivers/input/keyboard/Makefile | 1 + drivers/input/keyboard/samsung-keypad.c | 491 ++++++++++++++++++++++++++++ 4 files changed, 544 insertions(+) create mode 100644 arch/arm/plat-samsung/include/plat/keypad.h create mode 100644 drivers/input/keyboard/samsung-keypad.c diff --git a/arch/arm/plat-samsung/include/plat/keypad.h b/arch/arm/plat-samsung/include/plat/keypad.h new file mode 100644 index 00000000000..3a70c125fe5 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/keypad.h @@ -0,0 +1,43 @@ +/* + * Samsung Platform - Keypad platform data definitions + * + * Copyright (C) 2010 Samsung Electronics Co.Ltd + * Author: Joonyoung Shim + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __PLAT_SAMSUNG_KEYPAD_H +#define __PLAT_SAMSUNG_KEYPAD_H + +#include + +#define SAMSUNG_MAX_ROWS 8 +#define SAMSUNG_MAX_COLS 8 + +/** + * struct samsung_keypad_platdata - Platform device data for Samsung Keypad. + * @keymap_data: pointer to &matrix_keymap_data. + * @rows: number of keypad row supported. + * @cols: number of keypad col supported. + * @no_autorepeat: disable key autorepeat. + * @wakeup: controls whether the device should be set up as wakeup source. + * @cfg_gpio: configure the GPIO. + * + * Initialisation data specific to either the machine or the platform + * for the device driver to use or call-back when configuring gpio. + */ +struct samsung_keypad_platdata { + const struct matrix_keymap_data *keymap_data; + unsigned int rows; + unsigned int cols; + bool no_autorepeat; + bool wakeup; + + void (*cfg_gpio)(unsigned int rows, unsigned int cols); +}; + +#endif /* __PLAT_SAMSUNG_KEYPAD_H */ diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index c7480934cee..451c38bc580 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -354,6 +354,15 @@ config KEYBOARD_PXA930_ROTARY To compile this driver as a module, choose M here: the module will be called pxa930_rotary. +config KEYBOARD_SAMSUNG + tristate "Samsung keypad support" + depends on SAMSUNG_DEV_KEYPAD + help + Say Y here if you want to use the Samsung keypad. + + To compile this driver as a module, choose M here: the + module will be called samsung-keypad. + config KEYBOARD_STOWAWAY tristate "Stowaway keyboard" select SERIO diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 0a16674ed3d..1a66d5f1ca8 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -33,6 +33,7 @@ obj-$(CONFIG_KEYBOARD_OPENCORES) += opencores-kbd.o obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o obj-$(CONFIG_KEYBOARD_QT2160) += qt2160.o +obj-$(CONFIG_KEYBOARD_SAMSUNG) += samsung-keypad.o obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o diff --git a/drivers/input/keyboard/samsung-keypad.c b/drivers/input/keyboard/samsung-keypad.c new file mode 100644 index 00000000000..f689f49e310 --- /dev/null +++ b/drivers/input/keyboard/samsung-keypad.c @@ -0,0 +1,491 @@ +/* + * Samsung keypad driver + * + * Copyright (C) 2010 Samsung Electronics Co.Ltd + * Author: Joonyoung Shim + * Author: Donghwa Lee + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define SAMSUNG_KEYIFCON 0x00 +#define SAMSUNG_KEYIFSTSCLR 0x04 +#define SAMSUNG_KEYIFCOL 0x08 +#define SAMSUNG_KEYIFROW 0x0c +#define SAMSUNG_KEYIFFC 0x10 + +/* SAMSUNG_KEYIFCON */ +#define SAMSUNG_KEYIFCON_INT_F_EN (1 << 0) +#define SAMSUNG_KEYIFCON_INT_R_EN (1 << 1) +#define SAMSUNG_KEYIFCON_DF_EN (1 << 2) +#define SAMSUNG_KEYIFCON_FC_EN (1 << 3) +#define SAMSUNG_KEYIFCON_WAKEUPEN (1 << 4) + +/* SAMSUNG_KEYIFSTSCLR */ +#define SAMSUNG_KEYIFSTSCLR_P_INT_MASK (0xff << 0) +#define SAMSUNG_KEYIFSTSCLR_R_INT_MASK (0xff << 8) +#define SAMSUNG_KEYIFSTSCLR_R_INT_OFFSET 8 +#define S5PV210_KEYIFSTSCLR_P_INT_MASK (0x3fff << 0) +#define S5PV210_KEYIFSTSCLR_R_INT_MASK (0x3fff << 16) +#define S5PV210_KEYIFSTSCLR_R_INT_OFFSET 16 + +/* SAMSUNG_KEYIFCOL */ +#define SAMSUNG_KEYIFCOL_MASK (0xff << 0) +#define S5PV210_KEYIFCOLEN_MASK (0xff << 8) + +/* SAMSUNG_KEYIFROW */ +#define SAMSUNG_KEYIFROW_MASK (0xff << 0) +#define S5PV210_KEYIFROW_MASK (0x3fff << 0) + +/* SAMSUNG_KEYIFFC */ +#define SAMSUNG_KEYIFFC_MASK (0x3ff << 0) + +enum samsung_keypad_type { + KEYPAD_TYPE_SAMSUNG, + KEYPAD_TYPE_S5PV210, +}; + +struct samsung_keypad { + struct input_dev *input_dev; + struct clk *clk; + void __iomem *base; + wait_queue_head_t wait; + bool stopped; + int irq; + unsigned int row_shift; + unsigned int rows; + unsigned int cols; + unsigned int row_state[SAMSUNG_MAX_COLS]; + unsigned short keycodes[]; +}; + +static int samsung_keypad_is_s5pv210(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + enum samsung_keypad_type type = + platform_get_device_id(pdev)->driver_data; + + return type == KEYPAD_TYPE_S5PV210; +} + +static void samsung_keypad_scan(struct samsung_keypad *keypad, + unsigned int *row_state) +{ + struct device *dev = keypad->input_dev->dev.parent; + unsigned int col; + unsigned int val; + + for (col = 0; col < keypad->cols; col++) { + if (samsung_keypad_is_s5pv210(dev)) { + val = S5PV210_KEYIFCOLEN_MASK; + val &= ~(1 << col) << 8; + } else { + val = SAMSUNG_KEYIFCOL_MASK; + val &= ~(1 << col); + } + + writel(val, keypad->base + SAMSUNG_KEYIFCOL); + mdelay(1); + + val = readl(keypad->base + SAMSUNG_KEYIFROW); + row_state[col] = ~val & ((1 << keypad->rows) - 1); + } + + /* KEYIFCOL reg clear */ + writel(0, keypad->base + SAMSUNG_KEYIFCOL); +} + +static bool samsung_keypad_report(struct samsung_keypad *keypad, + unsigned int *row_state) +{ + struct input_dev *input_dev = keypad->input_dev; + unsigned int changed; + unsigned int pressed; + unsigned int key_down = 0; + unsigned int val; + unsigned int col, row; + + for (col = 0; col < keypad->cols; col++) { + changed = row_state[col] ^ keypad->row_state[col]; + key_down |= row_state[col]; + if (!changed) + continue; + + for (row = 0; row < keypad->rows; row++) { + if (!(changed & (1 << row))) + continue; + + pressed = row_state[col] & (1 << row); + + dev_dbg(&keypad->input_dev->dev, + "key %s, row: %d, col: %d\n", + pressed ? "pressed" : "released", row, col); + + val = MATRIX_SCAN_CODE(row, col, keypad->row_shift); + + input_event(input_dev, EV_MSC, MSC_SCAN, val); + input_report_key(input_dev, + keypad->keycodes[val], pressed); + } + input_sync(keypad->input_dev); + } + + memcpy(keypad->row_state, row_state, sizeof(keypad->row_state)); + + return key_down; +} + +static irqreturn_t samsung_keypad_irq(int irq, void *dev_id) +{ + struct samsung_keypad *keypad = dev_id; + unsigned int row_state[SAMSUNG_MAX_COLS]; + unsigned int val; + bool key_down; + + do { + val = readl(keypad->base + SAMSUNG_KEYIFSTSCLR); + /* Clear interrupt. */ + writel(~0x0, keypad->base + SAMSUNG_KEYIFSTSCLR); + + samsung_keypad_scan(keypad, row_state); + + key_down = samsung_keypad_report(keypad, row_state); + if (key_down) + wait_event_timeout(keypad->wait, keypad->stopped, + msecs_to_jiffies(50)); + + } while (key_down && !keypad->stopped); + + return IRQ_HANDLED; +} + +static void samsung_keypad_start(struct samsung_keypad *keypad) +{ + unsigned int val; + + /* Tell IRQ thread that it may poll the device. */ + keypad->stopped = false; + + clk_enable(keypad->clk); + + /* Enable interrupt bits. */ + val = readl(keypad->base + SAMSUNG_KEYIFCON); + val |= SAMSUNG_KEYIFCON_INT_F_EN | SAMSUNG_KEYIFCON_INT_R_EN; + writel(val, keypad->base + SAMSUNG_KEYIFCON); + + /* KEYIFCOL reg clear. */ + writel(0, keypad->base + SAMSUNG_KEYIFCOL); +} + +static void samsung_keypad_stop(struct samsung_keypad *keypad) +{ + unsigned int val; + + /* Signal IRQ thread to stop polling and disable the handler. */ + keypad->stopped = true; + wake_up(&keypad->wait); + disable_irq(keypad->irq); + + /* Clear interrupt. */ + writel(~0x0, keypad->base + SAMSUNG_KEYIFSTSCLR); + + /* Disable interrupt bits. */ + val = readl(keypad->base + SAMSUNG_KEYIFCON); + val &= ~(SAMSUNG_KEYIFCON_INT_F_EN | SAMSUNG_KEYIFCON_INT_R_EN); + writel(val, keypad->base + SAMSUNG_KEYIFCON); + + clk_disable(keypad->clk); + + /* + * Now that chip should not generate interrupts we can safely + * re-enable the handler. + */ + enable_irq(keypad->irq); +} + +static int samsung_keypad_open(struct input_dev *input_dev) +{ + struct samsung_keypad *keypad = input_get_drvdata(input_dev); + + samsung_keypad_start(keypad); + + return 0; +} + +static void samsung_keypad_close(struct input_dev *input_dev) +{ + struct samsung_keypad *keypad = input_get_drvdata(input_dev); + + samsung_keypad_stop(keypad); +} + +static int __devinit samsung_keypad_probe(struct platform_device *pdev) +{ + const struct samsung_keypad_platdata *pdata; + const struct matrix_keymap_data *keymap_data; + struct samsung_keypad *keypad; + struct resource *res; + struct input_dev *input_dev; + unsigned int row_shift; + unsigned int keymap_size; + int error; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "no platform data defined\n"); + return -EINVAL; + } + + keymap_data = pdata->keymap_data; + if (!keymap_data) { + dev_err(&pdev->dev, "no keymap data defined\n"); + return -EINVAL; + } + + if (!pdata->rows || pdata->rows > SAMSUNG_MAX_ROWS) + return -EINVAL; + + if (!pdata->cols || pdata->cols > SAMSUNG_MAX_COLS) + return -EINVAL; + + /* initialize the gpio */ + if (pdata->cfg_gpio) + pdata->cfg_gpio(pdata->rows, pdata->cols); + + row_shift = get_count_order(pdata->cols); + keymap_size = (pdata->rows << row_shift) * sizeof(keypad->keycodes[0]); + + keypad = kzalloc(sizeof(*keypad) + keymap_size, GFP_KERNEL); + input_dev = input_allocate_device(); + if (!keypad || !input_dev) { + error = -ENOMEM; + goto err_free_mem; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + error = -ENODEV; + goto err_free_mem; + } + + keypad->base = ioremap(res->start, resource_size(res)); + if (!keypad->base) { + error = -EBUSY; + goto err_free_mem; + } + + keypad->clk = clk_get(&pdev->dev, "keypad"); + if (IS_ERR(keypad->clk)) { + dev_err(&pdev->dev, "failed to get keypad clk\n"); + error = PTR_ERR(keypad->clk); + goto err_unmap_base; + } + + keypad->input_dev = input_dev; + keypad->row_shift = row_shift; + keypad->rows = pdata->rows; + keypad->cols = pdata->cols; + init_waitqueue_head(&keypad->wait); + + input_dev->name = pdev->name; + input_dev->id.bustype = BUS_HOST; + input_dev->dev.parent = &pdev->dev; + input_set_drvdata(input_dev, keypad); + + input_dev->open = samsung_keypad_open; + input_dev->close = samsung_keypad_close; + + input_dev->evbit[0] = BIT_MASK(EV_KEY); + if (!pdata->no_autorepeat) + input_dev->evbit[0] |= BIT_MASK(EV_REP); + + input_set_capability(input_dev, EV_MSC, MSC_SCAN); + + input_dev->keycode = keypad->keycodes; + input_dev->keycodesize = sizeof(keypad->keycodes[0]); + input_dev->keycodemax = pdata->rows << row_shift; + + matrix_keypad_build_keymap(keymap_data, row_shift, + input_dev->keycode, input_dev->keybit); + + keypad->irq = platform_get_irq(pdev, 0); + if (keypad->irq < 0) { + error = keypad->irq; + goto err_put_clk; + } + + error = request_threaded_irq(keypad->irq, NULL, samsung_keypad_irq, + IRQF_ONESHOT, dev_name(&pdev->dev), keypad); + if (error) { + dev_err(&pdev->dev, "failed to register keypad interrupt\n"); + goto err_put_clk; + } + + error = input_register_device(keypad->input_dev); + if (error) + goto err_free_irq; + + device_init_wakeup(&pdev->dev, pdata->wakeup); + platform_set_drvdata(pdev, keypad); + return 0; + +err_free_irq: + free_irq(keypad->irq, keypad); +err_put_clk: + clk_put(keypad->clk); +err_unmap_base: + iounmap(keypad->base); +err_free_mem: + input_free_device(input_dev); + kfree(keypad); + + return error; +} + +static int __devexit samsung_keypad_remove(struct platform_device *pdev) +{ + struct samsung_keypad *keypad = platform_get_drvdata(pdev); + + device_init_wakeup(&pdev->dev, 0); + platform_set_drvdata(pdev, NULL); + + input_unregister_device(keypad->input_dev); + + /* + * It is safe to free IRQ after unregistering device because + * samsung_keypad_close will shut off interrupts. + */ + free_irq(keypad->irq, keypad); + + clk_put(keypad->clk); + + iounmap(keypad->base); + kfree(keypad); + + return 0; +} + +#ifdef CONFIG_PM +static void samsung_keypad_toggle_wakeup(struct samsung_keypad *keypad, + bool enable) +{ + struct device *dev = keypad->input_dev->dev.parent; + unsigned int val; + + clk_enable(keypad->clk); + + val = readl(keypad->base + SAMSUNG_KEYIFCON); + if (enable) { + val |= SAMSUNG_KEYIFCON_WAKEUPEN; + if (device_may_wakeup(dev)) + enable_irq_wake(keypad->irq); + } else { + val &= ~SAMSUNG_KEYIFCON_WAKEUPEN; + if (device_may_wakeup(dev)) + disable_irq_wake(keypad->irq); + } + writel(val, keypad->base + SAMSUNG_KEYIFCON); + + clk_disable(keypad->clk); +} + +static int samsung_keypad_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct samsung_keypad *keypad = platform_get_drvdata(pdev); + struct input_dev *input_dev = keypad->input_dev; + + mutex_lock(&input_dev->mutex); + + if (input_dev->users) + samsung_keypad_stop(keypad); + + samsung_keypad_toggle_wakeup(keypad, true); + + mutex_unlock(&input_dev->mutex); + + return 0; +} + +static int samsung_keypad_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct samsung_keypad *keypad = platform_get_drvdata(pdev); + struct input_dev *input_dev = keypad->input_dev; + + mutex_lock(&input_dev->mutex); + + samsung_keypad_toggle_wakeup(keypad, false); + + if (input_dev->users) + samsung_keypad_start(keypad); + + mutex_unlock(&input_dev->mutex); + + return 0; +} + +static const struct dev_pm_ops samsung_keypad_pm_ops = { + .suspend = samsung_keypad_suspend, + .resume = samsung_keypad_resume, +}; +#endif + +static struct platform_device_id samsung_keypad_driver_ids[] = { + { + .name = "samsung-keypad", + .driver_data = KEYPAD_TYPE_SAMSUNG, + }, { + .name = "s5pv210-keypad", + .driver_data = KEYPAD_TYPE_S5PV210, + }, + { }, +}; +MODULE_DEVICE_TABLE(platform, samsung_keypad_driver_ids); + +static struct platform_driver samsung_keypad_driver = { + .probe = samsung_keypad_probe, + .remove = __devexit_p(samsung_keypad_remove), + .driver = { + .name = "samsung-keypad", + .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &samsung_keypad_pm_ops, +#endif + }, + .id_table = samsung_keypad_driver_ids, +}; + +static int __init samsung_keypad_init(void) +{ + return platform_driver_register(&samsung_keypad_driver); +} +module_init(samsung_keypad_init); + +static void __exit samsung_keypad_exit(void) +{ + platform_driver_unregister(&samsung_keypad_driver); +} +module_exit(samsung_keypad_exit); + +MODULE_DESCRIPTION("Samsung keypad driver"); +MODULE_AUTHOR("Joonyoung Shim "); +MODULE_AUTHOR("Donghwa Lee "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:samsung-keypad"); -- cgit v1.2.3-18-g5258