From 062ef0d4bb66e975a79dec4d5cc3ef1bf584efef Mon Sep 17 00:00:00 2001 From: Ezequiel García Date: Sat, 11 Aug 2012 14:32:56 -0300 Subject: [media] staging: media: Remove easycap driver This driver has been replaced by stk1160. Signed-off-by: Ezequiel Garcia Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/Kconfig | 2 - drivers/staging/media/Makefile | 1 - drivers/staging/media/easycap/Kconfig | 30 - drivers/staging/media/easycap/Makefile | 10 - drivers/staging/media/easycap/README | 141 - drivers/staging/media/easycap/easycap.h | 567 --- drivers/staging/media/easycap/easycap_ioctl.c | 2443 ------------- drivers/staging/media/easycap/easycap_low.c | 968 ----- drivers/staging/media/easycap/easycap_main.c | 4239 ---------------------- drivers/staging/media/easycap/easycap_settings.c | 696 ---- drivers/staging/media/easycap/easycap_sound.c | 750 ---- drivers/staging/media/easycap/easycap_testcard.c | 155 - 12 files changed, 10002 deletions(-) delete mode 100644 drivers/staging/media/easycap/Kconfig delete mode 100644 drivers/staging/media/easycap/Makefile delete mode 100644 drivers/staging/media/easycap/README delete mode 100644 drivers/staging/media/easycap/easycap.h delete mode 100644 drivers/staging/media/easycap/easycap_ioctl.c delete mode 100644 drivers/staging/media/easycap/easycap_low.c delete mode 100644 drivers/staging/media/easycap/easycap_main.c delete mode 100644 drivers/staging/media/easycap/easycap_settings.c delete mode 100644 drivers/staging/media/easycap/easycap_sound.c delete mode 100644 drivers/staging/media/easycap/easycap_testcard.c diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig index 4f4b7d6281a..427218b8b10 100644 --- a/drivers/staging/media/Kconfig +++ b/drivers/staging/media/Kconfig @@ -25,8 +25,6 @@ source "drivers/staging/media/cxd2099/Kconfig" source "drivers/staging/media/dt3155v4l/Kconfig" -source "drivers/staging/media/easycap/Kconfig" - source "drivers/staging/media/go7007/Kconfig" source "drivers/staging/media/solo6x10/Kconfig" diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile index c69124cdb0d..aec6eb96394 100644 --- a/drivers/staging/media/Makefile +++ b/drivers/staging/media/Makefile @@ -1,6 +1,5 @@ obj-$(CONFIG_DVB_AS102) += as102/ obj-$(CONFIG_DVB_CXD2099) += cxd2099/ -obj-$(CONFIG_EASYCAP) += easycap/ obj-$(CONFIG_LIRC_STAGING) += lirc/ obj-$(CONFIG_SOLO6X10) += solo6x10/ obj-$(CONFIG_VIDEO_DT3155) += dt3155v4l/ diff --git a/drivers/staging/media/easycap/Kconfig b/drivers/staging/media/easycap/Kconfig deleted file mode 100644 index a425a6f9cdc..00000000000 --- a/drivers/staging/media/easycap/Kconfig +++ /dev/null @@ -1,30 +0,0 @@ -config EASYCAP - tristate "EasyCAP USB ID 05e1:0408 support" - depends on USB && VIDEO_DEV && SND - select SND_PCM - - ---help--- - This is an integrated audio/video driver for EasyCAP cards with - USB ID 05e1:0408. It supports two hardware variants: - - * EasyCAP USB 2.0 Video Adapter with Audio, Model DC60, - having input cables labelled CVBS, S-VIDEO, AUDIO(L), AUDIO(R) - - * EasyCAP002 4-Channel USB 2.0 DVR, having input cables labelled - 1, 2, 3, 4 and an unlabelled input cable for a microphone. - - To compile this driver as a module, choose M here: the - module will be called easycap - -config EASYCAP_DEBUG - bool "Enable EasyCAP driver debugging" - depends on EASYCAP - - ---help--- - This option enables debug printouts - - To enable debug, pass the debug level to the debug module - parameter: - - modprobe easycap debug=[0..9] - diff --git a/drivers/staging/media/easycap/Makefile b/drivers/staging/media/easycap/Makefile deleted file mode 100644 index a34e75f59c1..00000000000 --- a/drivers/staging/media/easycap/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -easycap-objs := easycap_main.o -easycap-objs += easycap_low.o -easycap-objs += easycap_ioctl.o -easycap-objs += easycap_settings.o -easycap-objs += easycap_testcard.o -easycap-objs += easycap_sound.o -obj-$(CONFIG_EASYCAP) += easycap.o - -ccflags-y := -Wall - diff --git a/drivers/staging/media/easycap/README b/drivers/staging/media/easycap/README deleted file mode 100644 index 796b032384b..00000000000 --- a/drivers/staging/media/easycap/README +++ /dev/null @@ -1,141 +0,0 @@ - - *********************************************************** - * EasyCAP USB 2.0 Video Adapter with Audio, Model DC60 * - * and * - * EasyCAP002 4-Channel USB 2.0 DVR * - *********************************************************** - Mike Thomas - - - -SUPPORTED HARDWARE ------------------- - -This driver is intended for use with hardware having USB ID 05e1:0408. -Two kinds of EasyCAP have this USB ID, namely: - - * EasyCAP USB 2.0 Video Adapter with Audio, Model DC60, - having input cables labelled CVBS, S-VIDEO, AUDIO(L), AUDIO(R) - - * EasyCAP002 4-Channel USB 2.0 DVR, having input cables labelled - 1, 2, 3, 4 and an unlabelled input cable for a microphone. - - -BUILD OPTIONS AND DEPENDENCIES ------------------------------- - -Unless EASYCAP_DEBUG is defined during compilation it will not be possible -to select a debug level at the time of module installation. - - -KNOWN RUNTIME ISSUES --------------------- - -(1) Intentionally, this driver will not stream material which is unambiguously -identified by the hardware as copy-protected. Normal video output will be -present for about a minute but will then freeze when this situation arises. - -(2) The controls for luminance, contrast, saturation, hue and volume may not -always work properly. - -(3) Reduced-resolution S-Video seems to suffer from moire artefacts. - - -INPUT NUMBERING ---------------- - -For the EasyCAP with S-VIDEO input cable the driver regards a request for -inputs numbered 0 or 1 as referring to CVBS and a request for input -numbered 5 as referring to S-VIDEO. - -For the EasyCAP with four CVBS inputs the driver expects to be asked for -any one of inputs numbered 1,2,3,4. If input 0 is asked for, it is -interpreted as input 1. - - -MODULE PARAMETERS ------------------ - -Three module parameters are defined: - -debug the easycap module is configured at diagnostic level n (0 to 9) -gain audio gain level n (0 to 31, default is 16) -bars whether to display testcard bars when incoming video signal is lost - 0 => no, 1 => yes (default) - - -SUPPORTED TV STANDARDS AND RESOLUTIONS --------------------------------------- - -The following TV standards are natively supported by the hardware and are -usable as (for example) the "norm=" parameter in the mplayer command: - - PAL_BGHIN, NTSC_N_443, - PAL_Nc, NTSC_N, - SECAM, NTSC_M, NTSC_M_JP, - PAL_60, NTSC_443, - PAL_M. - -In addition, the driver offers "custom" pseudo-standards with a framerate -which is 20% of the usual framerate. These pseudo-standards are named: - - PAL_BGHIN_SLOW, NTSC_N_443_SLOW, - PAL_Nc_SLOW, NTSC_N_SLOW, - SECAM_SLOW, NTSC_M_SLOW, NTSC_M_JP_SLOW, - PAL_60_SLOW, NTSC_443_SLOW, - PAL_M_SLOW. - - -The available picture sizes are: - - at 25 frames per second: 720x576, 704x576, 640x480, 360x288, 320x240; - at 30 frames per second: 720x480, 640x480, 360x240, 320x240. - - -WHAT'S TESTED AND WHAT'S NOT ----------------------------- - -This driver is known to work with mplayer, mencoder, tvtime, zoneminder, -xawtv, gstreamer and sufficiently recent versions of vlc. An interface -to ffmpeg is implemented, but serious audio-video synchronization problems -remain. - -The driver is designed to support all the TV standards accepted by the -hardware, but as yet it has actually been tested on only a few of these. - -I have been unable to test and calibrate the S-video input myself because I -do not possess any equipment with S-video output. - - -UDEV RULES ----------- - -In order that the special files /dev/easycap0 and /dev/easysnd1 are created -with conveniently relaxed permissions when the EasyCAP is plugged in, a file -is preferably to be provided in directory /etc/udev/rules.d with content: - -ACTION!="add|change", GOTO="easycap_rules_end" -ATTRS{idVendor}=="05e1", ATTRS{idProduct}=="0408", \ - MODE="0666", OWNER="root", GROUP="root" -LABEL="easycap_rules_end" - - -MODPROBE CONFIGURATION ----------------------- - -The easycap module is in competition with the module snd-usb-audio for the -EasyCAP's audio channel, and its installation can be aided by providing a -file in directory /etc/modprobe.d with content: - -options easycap gain=16 bars=1 -install easycap /sbin/rmmod snd-usb-audio; /sbin/modprobe --ignore-install easycap - - -ACKNOWLEGEMENTS AND REFERENCES ------------------------------- -This driver makes use of information contained in the Syntek Semicon DC-1125 -Driver, presently maintained at http://sourceforge.net/projects/syntekdriver/ -by Nicolas Vivien. Particularly useful has been a patch to the latter driver -provided by Ivor Hewitt in January 2009. The NTSC implementation is taken -from the work of Ben Trask. - diff --git a/drivers/staging/media/easycap/easycap.h b/drivers/staging/media/easycap/easycap.h deleted file mode 100644 index a007e7442be..00000000000 --- a/drivers/staging/media/easycap/easycap.h +++ /dev/null @@ -1,567 +0,0 @@ -/***************************************************************************** -* * -* easycap.h * -* * -*****************************************************************************/ -/* - * - * Copyright (C) 2010 R.M. Thomas - * - * - * This is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The software is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this software; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ -/*****************************************************************************/ -/*---------------------------------------------------------------------------*/ -/* - * THE FOLLOWING PARAMETERS ARE UNDEFINED: - * - * EASYCAP_DEBUG - * - * IF REQUIRED THEY MUST BE EXTERNALLY DEFINED, FOR EXAMPLE AS COMPILER - * OPTIONS. - */ -/*---------------------------------------------------------------------------*/ - -#ifndef __EASYCAP_H__ -#define __EASYCAP_H__ - -/*---------------------------------------------------------------------------*/ -/* - * THESE ARE NORMALLY DEFINED - */ -/*---------------------------------------------------------------------------*/ -#define PATIENCE 500 -#define PERSEVERE -/*---------------------------------------------------------------------------*/ -/* - * THESE ARE FOR MAINTENANCE ONLY - NORMALLY UNDEFINED: - */ -/*---------------------------------------------------------------------------*/ -#undef EASYCAP_TESTCARD -/*---------------------------------------------------------------------------*/ -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/*---------------------------------------------------------------------------*/ -/* VENDOR, PRODUCT: Syntek Semiconductor Co., Ltd - * - * EITHER EasyCAP USB 2.0 Video Adapter with Audio, Model No. DC60 - * with input cabling: AUDIO(L), AUDIO(R), CVBS, S-VIDEO. - * - * OR EasyCAP 4CHANNEL USB 2.0 DVR, Model No. EasyCAP002 - * with input cabling: MICROPHONE, CVBS1, CVBS2, CVBS3, CVBS4. - */ -/*---------------------------------------------------------------------------*/ -#define USB_EASYCAP_VENDOR_ID 0x05e1 -#define USB_EASYCAP_PRODUCT_ID 0x0408 - -#define EASYCAP_DRIVER_VERSION "0.9.01" -#define EASYCAP_DRIVER_DESCRIPTION "easycapdc60" - -#define DONGLE_MANY 8 -#define INPUT_MANY 6 -/*---------------------------------------------------------------------------*/ -/* - * DEFAULT LUMINANCE, CONTRAST, SATURATION AND HUE - */ -/*---------------------------------------------------------------------------*/ -#define SAA_0A_DEFAULT 0x7F -#define SAA_0B_DEFAULT 0x3F -#define SAA_0C_DEFAULT 0x2F -#define SAA_0D_DEFAULT 0x00 -/*---------------------------------------------------------------------------*/ -/* - * VIDEO STREAMING PARAMETERS: - * USB 2.0 PROVIDES FOR HIGH-BANDWIDTH ENDPOINTS WITH AN UPPER LIMIT - * OF 3072 BYTES PER MICROFRAME for wMaxPacketSize. - */ -/*---------------------------------------------------------------------------*/ -#define VIDEO_ISOC_BUFFER_MANY 16 -#define VIDEO_ISOC_ORDER 3 -#define VIDEO_ISOC_FRAMESPERDESC ((unsigned int) 1 << VIDEO_ISOC_ORDER) -#define USB_2_0_MAXPACKETSIZE 3072 -#if (USB_2_0_MAXPACKETSIZE > PAGE_SIZE) -#error video_isoc_buffer[.] will not be big enough -#endif -#define VIDEO_JUNK_TOLERATE VIDEO_ISOC_BUFFER_MANY -#define VIDEO_LOST_TOLERATE 50 -/*---------------------------------------------------------------------------*/ -/* - * VIDEO BUFFERS - */ -/*---------------------------------------------------------------------------*/ -#define FIELD_BUFFER_SIZE (203 * PAGE_SIZE) -#define FRAME_BUFFER_SIZE (405 * PAGE_SIZE) -#define FIELD_BUFFER_MANY 4 -#define FRAME_BUFFER_MANY 6 -/*---------------------------------------------------------------------------*/ -/* - * AUDIO STREAMING PARAMETERS - */ -/*---------------------------------------------------------------------------*/ -#define AUDIO_ISOC_BUFFER_MANY 16 -#define AUDIO_ISOC_ORDER 1 -#define AUDIO_ISOC_FRAMESPERDESC 32 -#define AUDIO_ISOC_BUFFER_SIZE (PAGE_SIZE << AUDIO_ISOC_ORDER) -/*---------------------------------------------------------------------------*/ -/* - * AUDIO BUFFERS - */ -/*---------------------------------------------------------------------------*/ -#define AUDIO_FRAGMENT_MANY 32 -#define PAGES_PER_AUDIO_FRAGMENT 4 -/*---------------------------------------------------------------------------*/ -/* - * IT IS ESSENTIAL THAT EVEN-NUMBERED STANDARDS ARE 25 FRAMES PER SECOND, - * ODD-NUMBERED STANDARDS ARE 30 FRAMES PER SECOND. - * THE NUMBERING OF STANDARDS MUST NOT BE CHANGED WITHOUT DUE CARE. NOT - * ONLY MUST THE PARAMETER - * STANDARD_MANY - * BE CHANGED TO CORRESPOND TO THE NEW NUMBER OF STANDARDS, BUT ALSO THE - * NUMBERING MUST REMAIN AN UNBROKEN ASCENDING SEQUENCE: DUMMY STANDARDS - * MAY NEED TO BE ADDED. APPROPRIATE CHANGES WILL ALWAYS BE REQUIRED IN - * ROUTINE fillin_formats() AND POSSIBLY ELSEWHERE. BEWARE. - */ -/*---------------------------------------------------------------------------*/ -#define PAL_BGHIN 0 -#define PAL_Nc 2 -#define SECAM 4 -#define NTSC_N 6 -#define NTSC_N_443 8 -#define NTSC_M 1 -#define NTSC_443 3 -#define NTSC_M_JP 5 -#define PAL_60 7 -#define PAL_M 9 -#define PAL_BGHIN_SLOW 10 -#define PAL_Nc_SLOW 12 -#define SECAM_SLOW 14 -#define NTSC_N_SLOW 16 -#define NTSC_N_443_SLOW 18 -#define NTSC_M_SLOW 11 -#define NTSC_443_SLOW 13 -#define NTSC_M_JP_SLOW 15 -#define PAL_60_SLOW 17 -#define PAL_M_SLOW 19 -#define STANDARD_MANY 20 -/*---------------------------------------------------------------------------*/ -/* - * ENUMS - */ -/*---------------------------------------------------------------------------*/ -enum { - AT_720x576, - AT_704x576, - AT_640x480, - AT_720x480, - AT_360x288, - AT_320x240, - AT_360x240, - RESOLUTION_MANY -}; -enum { - FMT_UYVY, - FMT_YUY2, - FMT_RGB24, - FMT_RGB32, - FMT_BGR24, - FMT_BGR32, - PIXELFORMAT_MANY -}; -enum { - FIELD_NONE, - FIELD_INTERLACED, - INTERLACE_MANY -}; -#define SETTINGS_MANY (STANDARD_MANY * \ - RESOLUTION_MANY * \ - 2 * \ - PIXELFORMAT_MANY * \ - INTERLACE_MANY) -/*---------------------------------------------------------------------------*/ -/* - * STRUCTURE DEFINITIONS - */ -/*---------------------------------------------------------------------------*/ -struct easycap_dongle { - struct easycap *peasycap; - struct mutex mutex_video; - struct mutex mutex_audio; -}; -/*---------------------------------------------------------------------------*/ -struct data_buffer { - struct list_head list_head; - void *pgo; - void *pto; - u16 kount; - u16 input; -}; -/*---------------------------------------------------------------------------*/ -struct data_urb { - struct list_head list_head; - struct urb *purb; - int isbuf; - int length; -}; -/*---------------------------------------------------------------------------*/ -struct easycap_standard { - u16 mask; -struct v4l2_standard v4l2_standard; -}; -struct easycap_format { - u16 mask; - char name[128]; -struct v4l2_format v4l2_format; -}; -struct inputset { - int input; - int input_ok; - int standard_offset; - int standard_offset_ok; - int format_offset; - int format_offset_ok; - int brightness; - int brightness_ok; - int contrast; - int contrast_ok; - int saturation; - int saturation_ok; - int hue; - int hue_ok; -}; -/*---------------------------------------------------------------------------*/ -/* - * easycap.ilk == 0 => CVBS+S-VIDEO HARDWARE, AUDIO wMaxPacketSize=256 - * easycap.ilk == 2 => CVBS+S-VIDEO HARDWARE, AUDIO wMaxPacketSize=9 - * easycap.ilk == 3 => FOUR-CVBS HARDWARE, AUDIO wMaxPacketSize=9 - */ -/*---------------------------------------------------------------------------*/ -struct easycap { - int isdongle; - int minor; - - struct video_device video_device; - struct v4l2_device v4l2_device; - - int status; - unsigned int audio_pages_per_fragment; - unsigned int audio_bytes_per_fragment; - unsigned int audio_buffer_page_many; - -#define UPSAMPLE -#ifdef UPSAMPLE - s16 oldaudio; -#endif /*UPSAMPLE*/ - - int ilk; - bool microphone; - - struct usb_device *pusb_device; - struct usb_interface *pusb_interface; - - struct kref kref; - - int queued[FRAME_BUFFER_MANY]; - int done[FRAME_BUFFER_MANY]; - - wait_queue_head_t wq_video; - wait_queue_head_t wq_audio; - wait_queue_head_t wq_trigger; - - int input; - int polled; - int standard_offset; - int format_offset; - struct inputset inputset[INPUT_MANY]; - - bool ntsc; - int fps; - int usec; - int tolerate; - int skip; - int skipped; - int lost[INPUT_MANY]; - int merit[180]; - - int video_interface; - int video_altsetting_on; - int video_altsetting_off; - int video_endpointnumber; - int video_isoc_maxframesize; - int video_isoc_buffer_size; - int video_isoc_framesperdesc; - - int video_isoc_streaming; - int video_isoc_sequence; - int video_idle; - int video_eof; - int video_junk; - - struct data_buffer video_isoc_buffer[VIDEO_ISOC_BUFFER_MANY]; - struct data_buffer field_buffer[FIELD_BUFFER_MANY] - [(FIELD_BUFFER_SIZE/PAGE_SIZE)]; - struct data_buffer frame_buffer[FRAME_BUFFER_MANY] - [(FRAME_BUFFER_SIZE/PAGE_SIZE)]; - - struct list_head urb_video_head; - struct list_head *purb_video_head; - - u8 cache[8]; - u8 *pcache; - int video_mt; - int audio_mt; - u32 isequence; - - int vma_many; -/*---------------------------------------------------------------------------*/ -/* - * BUFFER INDICATORS - */ -/*---------------------------------------------------------------------------*/ - int field_fill; /* Field buffer being filled by easycap_complete(). */ - /* Bumped only by easycap_complete(). */ - int field_page; /* Page of field buffer page being filled by */ - /* easycap_complete(). */ - int field_read; /* Field buffer to be read by field2frame(). */ - /* Bumped only by easycap_complete(). */ - int frame_fill; /* Frame buffer being filled by field2frame(). */ - /* Bumped only by easycap_dqbuf() when */ - /* field2frame() has created a complete frame. */ - int frame_read; /* Frame buffer offered to user by DQBUF. */ - /* Set only by easycap_dqbuf() to trail frame_fill.*/ - int frame_lock; /* Flag set to 1 by DQBUF and cleared by QBUF */ -/*---------------------------------------------------------------------------*/ -/* - * IMAGE PROPERTIES - */ -/*---------------------------------------------------------------------------*/ - u32 pixelformat; - int width; - int height; - int bytesperpixel; - bool byteswaporder; - bool decimatepixel; - bool offerfields; - int frame_buffer_used; - int frame_buffer_many; - int videofieldamount; - - int brightness; - int contrast; - int saturation; - int hue; - - int allocation_video_urb; - int allocation_video_page; - int allocation_video_struct; - int registered_video; -/*---------------------------------------------------------------------------*/ -/* - * ALSA - */ -/*---------------------------------------------------------------------------*/ - struct snd_pcm_hardware alsa_hardware; - struct snd_card *psnd_card; - struct snd_pcm *psnd_pcm; - struct snd_pcm_substream *psubstream; - int dma_fill; - int dma_next; - int dma_read; -/*---------------------------------------------------------------------------*/ -/* - * SOUND PROPERTIES - */ -/*---------------------------------------------------------------------------*/ - int audio_interface; - int audio_altsetting_on; - int audio_altsetting_off; - int audio_endpointnumber; - int audio_isoc_maxframesize; - int audio_isoc_buffer_size; - int audio_isoc_framesperdesc; - - int audio_isoc_streaming; - int audio_idle; - int audio_eof; - int volume; - int mute; - s8 gain; - - struct data_buffer audio_isoc_buffer[AUDIO_ISOC_BUFFER_MANY]; - - struct list_head urb_audio_head; - struct list_head *purb_audio_head; -/*---------------------------------------------------------------------------*/ -/* - * BUFFER INDICATORS - */ -/*---------------------------------------------------------------------------*/ - int audio_fill; /* Audio buffer being filled by easycap_complete(). */ - /* Bumped only by easycap_complete(). */ - int audio_read; /* Audio buffer page being read by easycap_read(). */ - /* Set by easycap_read() to trail audio_fill by */ - /* one fragment. */ -/*---------------------------------------------------------------------------*/ -/* - * SOUND PROPERTIES - */ -/*---------------------------------------------------------------------------*/ - int allocation_audio_urb; - int allocation_audio_page; - int allocation_audio_struct; - int registered_audio; - - long long int audio_sample; - long long int audio_niveau; - long long int audio_square; - - struct data_buffer audio_buffer[]; -}; -/*---------------------------------------------------------------------------*/ -/* - * VIDEO FUNCTION PROTOTYPES - */ -/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/ -int easycap_newinput(struct easycap *, int); -void easycap_testcard(struct easycap *, int); -int easycap_isdongle(struct easycap *); - -long easycap_unlocked_ioctl(struct file *, unsigned int, unsigned long); - -int easycap_video_dqbuf(struct easycap *, int); -int easycap_video_submit_urbs(struct easycap *); -int easycap_video_kill_urbs(struct easycap *); -int easycap_video_fillin_formats(void); - -int adjust_standard(struct easycap *, v4l2_std_id); -int adjust_format(struct easycap *, u32, u32, u32, int, bool); -int adjust_brightness(struct easycap *, int); -int adjust_contrast(struct easycap *, int); -int adjust_saturation(struct easycap *, int); -int adjust_hue(struct easycap *, int); -/*---------------------------------------------------------------------------*/ -/* - * AUDIO FUNCTION PROTOTYPES - */ -/*---------------------------------------------------------------------------*/ -int easycap_alsa_probe(struct easycap *); -int easycap_audio_kill_urbs(struct easycap *); -void easycap_alsa_complete(struct urb *); -/*---------------------------------------------------------------------------*/ -/* - * LOW-LEVEL FUNCTION PROTOTYPES - */ -/*---------------------------------------------------------------------------*/ -int easycap_audio_gainset(struct usb_device *, s8); -int easycap_audio_setup(struct easycap *); - -int easycap_wakeup_device(struct usb_device *); - -int setup_stk(struct usb_device *, bool); -int setup_saa(struct usb_device *, bool); -int ready_saa(struct usb_device *); -int merit_saa(struct usb_device *); -int check_vt(struct usb_device *); -int select_input(struct usb_device *, int, int); -int set_resolution(struct usb_device *, u16, u16, u16, u16); - -int read_saa(struct usb_device *, u16); -int write_saa(struct usb_device *, u16, u16); -int start_100(struct usb_device *); -int stop_100(struct usb_device *); -/*---------------------------------------------------------------------------*/ - - -/*---------------------------------------------------------------------------*/ -/* - * MACROS SAM(...) AND JOM(...) ALLOW DIAGNOSTIC OUTPUT TO BE TAGGED WITH - * THE IDENTITY OF THE DONGLE TO WHICH IT APPLIES, BUT IF INVOKED WHEN THE - * POINTER peasycap IS INVALID AN Oops IS LIKELY, AND ITS CAUSE MAY NOT BE - * IMMEDIATELY OBVIOUS FROM A CASUAL READING OF THE SOURCE CODE. BEWARE. -*/ -/*---------------------------------------------------------------------------*/ -const char *strerror(int err); - -#define SAY(format, args...) do { \ - printk(KERN_DEBUG "easycap:: %s: " \ - format, __func__, ##args); \ -} while (0) -#define SAM(format, args...) do { \ - printk(KERN_DEBUG "easycap::%i%s: " \ - format, peasycap->isdongle, __func__, ##args);\ -} while (0) - -#ifdef CONFIG_EASYCAP_DEBUG -extern int easycap_debug; -#define JOT(n, format, args...) do { \ - if (n <= easycap_debug) { \ - printk(KERN_DEBUG "easycap:: %s: " \ - format, __func__, ##args);\ - } \ -} while (0) -#define JOM(n, format, args...) do { \ - if (n <= easycap_debug) { \ - printk(KERN_DEBUG "easycap::%i%s: " \ - format, peasycap->isdongle, __func__, ##args);\ - } \ -} while (0) - -#else -#define JOT(n, format, args...) do {} while (0) -#define JOM(n, format, args...) do {} while (0) -#endif /* CONFIG_EASYCAP_DEBUG */ - -/*---------------------------------------------------------------------------*/ - -/*---------------------------------------------------------------------------*/ -/* globals - */ -/*---------------------------------------------------------------------------*/ - -extern bool easycap_readback; -extern const struct easycap_standard easycap_standard[]; -extern struct easycap_format easycap_format[]; -extern struct v4l2_queryctrl easycap_control[]; -extern struct easycap_dongle easycapdc60_dongle[]; - -#endif /* !__EASYCAP_H__ */ diff --git a/drivers/staging/media/easycap/easycap_ioctl.c b/drivers/staging/media/easycap/easycap_ioctl.c deleted file mode 100644 index 3cee3cd986d..00000000000 --- a/drivers/staging/media/easycap/easycap_ioctl.c +++ /dev/null @@ -1,2443 +0,0 @@ -/****************************************************************************** -* * -* easycap_ioctl.c * -* * -******************************************************************************/ -/* - * - * Copyright (C) 2010 R.M. Thomas - * - * - * This is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The software is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this software; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ -/*****************************************************************************/ - -#include "easycap.h" -#include - -/*--------------------------------------------------------------------------*/ -/* - * UNLESS THERE IS A PREMATURE ERROR RETURN THIS ROUTINE UPDATES THE - * FOLLOWING: - * peasycap->standard_offset - * peasycap->inputset[peasycap->input].standard_offset - * peasycap->fps - * peasycap->usec - * peasycap->tolerate - * peasycap->skip - */ -/*---------------------------------------------------------------------------*/ -int adjust_standard(struct easycap *peasycap, v4l2_std_id std_id) -{ - struct easycap_standard const *peasycap_standard; - u16 reg, set; - int ir, rc, need, k; - unsigned int itwas, isnow; - bool resubmit; - - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return -EFAULT; - } - if (!peasycap->pusb_device) { - SAM("ERROR: peasycap->pusb_device is NULL\n"); - return -EFAULT; - } - peasycap_standard = &easycap_standard[0]; - while (0xFFFF != peasycap_standard->mask) { - if (std_id == peasycap_standard->v4l2_standard.id) - break; - peasycap_standard++; - } - if (0xFFFF == peasycap_standard->mask) { - peasycap_standard = &easycap_standard[0]; - while (0xFFFF != peasycap_standard->mask) { - if (std_id & peasycap_standard->v4l2_standard.id) - break; - peasycap_standard++; - } - } - if (0xFFFF == peasycap_standard->mask) { - SAM("ERROR: 0x%08X=std_id: standard not found\n", - (unsigned int)std_id); - return -EINVAL; - } - SAM("selected standard: %s\n", - &(peasycap_standard->v4l2_standard.name[0])); - if (peasycap->standard_offset == peasycap_standard - easycap_standard) { - SAM("requested standard already in effect\n"); - return 0; - } - peasycap->standard_offset = peasycap_standard - easycap_standard; - for (k = 0; k < INPUT_MANY; k++) { - if (!peasycap->inputset[k].standard_offset_ok) { - peasycap->inputset[k].standard_offset = - peasycap->standard_offset; - } - } - if ((0 <= peasycap->input) && (INPUT_MANY > peasycap->input)) { - peasycap->inputset[peasycap->input].standard_offset = - peasycap->standard_offset; - peasycap->inputset[peasycap->input].standard_offset_ok = 1; - } else - JOM(8, "%i=peasycap->input\n", peasycap->input); - - peasycap->fps = peasycap_standard->v4l2_standard.frameperiod.denominator / - peasycap_standard->v4l2_standard.frameperiod.numerator; - switch (peasycap->fps) { - case 6: - case 30: { - peasycap->ntsc = true; - break; - } - case 5: - case 25: { - peasycap->ntsc = false; - break; - } - default: { - SAM("MISTAKE: %i=frames-per-second\n", peasycap->fps); - return -ENOENT; - } - } - JOM(8, "%i frames-per-second\n", peasycap->fps); - if (0x8000 & peasycap_standard->mask) { - peasycap->skip = 5; - peasycap->usec = 1000000 / (2 * (5 * peasycap->fps)); - peasycap->tolerate = 1000 * (25 / (5 * peasycap->fps)); - } else { - peasycap->skip = 0; - peasycap->usec = 1000000 / (2 * peasycap->fps); - peasycap->tolerate = 1000 * (25 / peasycap->fps); - } - if (peasycap->video_isoc_streaming) { - resubmit = true; - easycap_video_kill_urbs(peasycap); - } else - resubmit = false; -/*--------------------------------------------------------------------------*/ -/* - * SAA7113H DATASHEET PAGE 44, TABLE 42 - */ -/*--------------------------------------------------------------------------*/ - need = 0; - itwas = 0; - reg = 0x00; - set = 0x00; - switch (peasycap_standard->mask & 0x000F) { - case NTSC_M_JP: { - reg = 0x0A; - set = 0x95; - ir = read_saa(peasycap->pusb_device, reg); - if (0 > ir) - SAM("ERROR: cannot read SAA register 0x%02X\n", reg); - else - itwas = (unsigned int)ir; - rc = write_saa(peasycap->pusb_device, reg, set); - if (rc) - SAM("ERROR: failed to set SAA register " - "0x%02X to 0x%02X for JP standard\n", reg, set); - else { - isnow = (unsigned int)read_saa(peasycap->pusb_device, reg); - if (0 > ir) - JOM(8, "SAA register 0x%02X changed " - "to 0x%02X\n", reg, isnow); - else - JOM(8, "SAA register 0x%02X changed " - "from 0x%02X to 0x%02X\n", reg, itwas, isnow); - } - - reg = 0x0B; - set = 0x48; - ir = read_saa(peasycap->pusb_device, reg); - if (0 > ir) - SAM("ERROR: cannot read SAA register 0x%02X\n", reg); - else - itwas = (unsigned int)ir; - rc = write_saa(peasycap->pusb_device, reg, set); - if (rc) - SAM("ERROR: failed to set SAA register 0x%02X to 0x%02X " - "for JP standard\n", reg, set); - else { - isnow = (unsigned int)read_saa(peasycap->pusb_device, reg); - if (0 > ir) - JOM(8, "SAA register 0x%02X changed " - "to 0x%02X\n", reg, isnow); - else - JOM(8, "SAA register 0x%02X changed " - "from 0x%02X to 0x%02X\n", reg, itwas, isnow); - } -/*--------------------------------------------------------------------------*/ -/* - * NOTE: NO break HERE: RUN ON TO NEXT CASE - */ -/*--------------------------------------------------------------------------*/ - } - case NTSC_M: - case PAL_BGHIN: { - reg = 0x0E; - set = 0x01; - need = 1; - break; - } - case NTSC_N_443: - case PAL_60: { - reg = 0x0E; - set = 0x11; - need = 1; - break; - } - case NTSC_443: - case PAL_Nc: { - reg = 0x0E; - set = 0x21; - need = 1; - break; - } - case NTSC_N: - case PAL_M: { - reg = 0x0E; - set = 0x31; - need = 1; - break; - } - case SECAM: { - reg = 0x0E; - set = 0x51; - need = 1; - break; - } - default: - break; - } -/*--------------------------------------------------------------------------*/ - if (need) { - ir = read_saa(peasycap->pusb_device, reg); - if (0 > ir) - SAM("ERROR: failed to read SAA register 0x%02X\n", reg); - else - itwas = (unsigned int)ir; - rc = write_saa(peasycap->pusb_device, reg, set); - if (0 != write_saa(peasycap->pusb_device, reg, set)) { - SAM("ERROR: failed to set SAA register " - "0x%02X to 0x%02X for table 42\n", reg, set); - } else { - isnow = (unsigned int)read_saa(peasycap->pusb_device, reg); - if (0 > ir) - JOM(8, "SAA register 0x%02X changed " - "to 0x%02X\n", reg, isnow); - else - JOM(8, "SAA register 0x%02X changed " - "from 0x%02X to 0x%02X\n", reg, itwas, isnow); - } - } -/*--------------------------------------------------------------------------*/ -/* - * SAA7113H DATASHEET PAGE 41 - */ -/*--------------------------------------------------------------------------*/ - reg = 0x08; - ir = read_saa(peasycap->pusb_device, reg); - if (0 > ir) - SAM("ERROR: failed to read SAA register 0x%02X " - "so cannot reset\n", reg); - else { - itwas = (unsigned int)ir; - if (peasycap_standard->mask & 0x0001) - set = itwas | 0x40 ; - else - set = itwas & ~0x40 ; - rc = write_saa(peasycap->pusb_device, reg, set); - if (rc) - SAM("ERROR: failed to set SAA register 0x%02X to 0x%02X\n", - reg, set); - else { - isnow = (unsigned int)read_saa(peasycap->pusb_device, reg); - if (0 > ir) - JOM(8, "SAA register 0x%02X changed to 0x%02X\n", - reg, isnow); - else - JOM(8, "SAA register 0x%02X changed " - "from 0x%02X to 0x%02X\n", reg, itwas, isnow); - } - } -/*--------------------------------------------------------------------------*/ -/* - * SAA7113H DATASHEET PAGE 51, TABLE 57 - */ -/*---------------------------------------------------------------------------*/ - reg = 0x40; - ir = read_saa(peasycap->pusb_device, reg); - if (0 > ir) - SAM("ERROR: failed to read SAA register 0x%02X " - "so cannot reset\n", reg); - else { - itwas = (unsigned int)ir; - if (peasycap_standard->mask & 0x0001) - set = itwas | 0x80 ; - else - set = itwas & ~0x80 ; - rc = write_saa(peasycap->pusb_device, reg, set); - if (rc) - SAM("ERROR: failed to set SAA register 0x%02X to 0x%02X\n", - reg, set); - else { - isnow = (unsigned int)read_saa(peasycap->pusb_device, reg); - if (0 > ir) - JOM(8, "SAA register 0x%02X changed to 0x%02X\n", - reg, isnow); - else - JOM(8, "SAA register 0x%02X changed " - "from 0x%02X to 0x%02X\n", reg, itwas, isnow); - } - } -/*--------------------------------------------------------------------------*/ -/* - * SAA7113H DATASHEET PAGE 53, TABLE 66 - */ -/*--------------------------------------------------------------------------*/ - reg = 0x5A; - ir = read_saa(peasycap->pusb_device, reg); - if (0 > ir) - SAM("ERROR: failed to read SAA register 0x%02X but continuing\n", reg); - itwas = (unsigned int)ir; - if (peasycap_standard->mask & 0x0001) - set = 0x0A ; - else - set = 0x07 ; - if (0 != write_saa(peasycap->pusb_device, reg, set)) - SAM("ERROR: failed to set SAA register 0x%02X to 0x%02X\n", - reg, set); - else { - isnow = (unsigned int)read_saa(peasycap->pusb_device, reg); - if (0 > ir) - JOM(8, "SAA register 0x%02X changed " - "to 0x%02X\n", reg, isnow); - else - JOM(8, "SAA register 0x%02X changed " - "from 0x%02X to 0x%02X\n", reg, itwas, isnow); - } - if (resubmit) - easycap_video_submit_urbs(peasycap); - return 0; -} -/*****************************************************************************/ -/*--------------------------------------------------------------------------*/ -/* - * THE ALGORITHM FOR RESPONDING TO THE VIDIO_S_FMT IOCTL REQUIRES - * A VALID VALUE OF peasycap->standard_offset, OTHERWISE -EBUSY IS RETURNED. - * - * PROVIDED THE ARGUMENT try IS false AND THERE IS NO PREMATURE ERROR RETURN - * THIS ROUTINE UPDATES THE FOLLOWING: - * peasycap->format_offset - * peasycap->inputset[peasycap->input].format_offset - * peasycap->pixelformat - * peasycap->height - * peasycap->width - * peasycap->bytesperpixel - * peasycap->byteswaporder - * peasycap->decimatepixel - * peasycap->frame_buffer_used - * peasycap->videofieldamount - * peasycap->offerfields - * - * IF SUCCESSFUL THE FUNCTION RETURNS THE OFFSET IN easycap_format[] - * IDENTIFYING THE FORMAT WHICH IS TO RETURNED TO THE USER. - * ERRORS RETURN A NEGATIVE NUMBER. - */ -/*--------------------------------------------------------------------------*/ -int adjust_format(struct easycap *peasycap, - u32 width, u32 height, u32 pixelformat, int field, bool try) -{ - struct easycap_format *peasycap_format, *peasycap_best_format; - u16 mask; - struct usb_device *p; - int miss, multiplier, best, k; - char bf[5], fo[32], *pc; - u32 uc; - bool resubmit; - - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return -EFAULT; - } - if (0 > peasycap->standard_offset) { - JOM(8, "%i=peasycap->standard_offset\n", peasycap->standard_offset); - return -EBUSY; - } - p = peasycap->pusb_device; - if (!p) { - SAM("ERROR: peaycap->pusb_device is NULL\n"); - return -EFAULT; - } - pc = &bf[0]; - uc = pixelformat; - memcpy((void *)pc, (void *)(&uc), 4); - bf[4] = 0; - mask = 0xFF & easycap_standard[peasycap->standard_offset].mask; - SAM("sought: %ix%i,%s(0x%08X),%i=field,0x%02X=std mask\n", - width, height, pc, pixelformat, field, mask); - switch (field) { - case V4L2_FIELD_ANY: { - strcpy(&fo[0], "V4L2_FIELD_ANY "); - break; - } - case V4L2_FIELD_NONE: { - strcpy(&fo[0], "V4L2_FIELD_NONE"); - break; - } - case V4L2_FIELD_TOP: { - strcpy(&fo[0], "V4L2_FIELD_TOP"); - break; - } - case V4L2_FIELD_BOTTOM: { - strcpy(&fo[0], "V4L2_FIELD_BOTTOM"); - break; - } - case V4L2_FIELD_INTERLACED: { - strcpy(&fo[0], "V4L2_FIELD_INTERLACED"); - break; - } - case V4L2_FIELD_SEQ_TB: { - strcpy(&fo[0], "V4L2_FIELD_SEQ_TB"); - break; - } - case V4L2_FIELD_SEQ_BT: { - strcpy(&fo[0], "V4L2_FIELD_SEQ_BT"); - break; - } - case V4L2_FIELD_ALTERNATE: { - strcpy(&fo[0], "V4L2_FIELD_ALTERNATE"); - break; - } - case V4L2_FIELD_INTERLACED_TB: { - strcpy(&fo[0], "V4L2_FIELD_INTERLACED_TB"); - break; - } - case V4L2_FIELD_INTERLACED_BT: { - strcpy(&fo[0], "V4L2_FIELD_INTERLACED_BT"); - break; - } - default: { - strcpy(&fo[0], "V4L2_FIELD_... UNKNOWN "); - break; - } - } - SAM("sought: %s\n", &fo[0]); - if (V4L2_FIELD_ANY == field) { - field = V4L2_FIELD_NONE; - SAM("prefer: V4L2_FIELD_NONE=field, was V4L2_FIELD_ANY\n"); - } - peasycap_best_format = NULL; - peasycap_format = &easycap_format[0]; - while (0 != peasycap_format->v4l2_format.fmt.pix.width) { - JOM(16, ".> %i %i 0x%08X %ix%i\n", - peasycap_format->mask & 0x01, - peasycap_format->v4l2_format.fmt.pix.field, - peasycap_format->v4l2_format.fmt.pix.pixelformat, - peasycap_format->v4l2_format.fmt.pix.width, - peasycap_format->v4l2_format.fmt.pix.height); - - if (((peasycap_format->mask & 0x1F) == (mask & 0x1F)) && - (peasycap_format->v4l2_format.fmt.pix.field == field) && - (peasycap_format->v4l2_format.fmt.pix.pixelformat == pixelformat) && - (peasycap_format->v4l2_format.fmt.pix.width == width) && - (peasycap_format->v4l2_format.fmt.pix.height == height)) { - - peasycap_best_format = peasycap_format; - break; - } - peasycap_format++; - } - if (0 == peasycap_format->v4l2_format.fmt.pix.width) { - SAM("cannot do: %ix%i with standard mask 0x%02X\n", - width, height, mask); - peasycap_format = &easycap_format[0]; - best = -1; - while (0 != peasycap_format->v4l2_format.fmt.pix.width) { - if (((peasycap_format->mask & 0x1F) == (mask & 0x1F)) && - (peasycap_format->v4l2_format.fmt.pix.field == field) && - (peasycap_format->v4l2_format.fmt.pix.pixelformat == pixelformat)) { - - miss = abs(peasycap_format->v4l2_format.fmt.pix.width - width); - if ((best > miss) || (best < 0)) { - best = miss; - peasycap_best_format = peasycap_format; - if (!miss) - break; - } - } - peasycap_format++; - } - if (-1 == best) { - SAM("cannot do %ix... with standard mask 0x%02X\n", - width, mask); - SAM("cannot do ...x%i with standard mask 0x%02X\n", - height, mask); - SAM(" %ix%i unmatched\n", width, height); - return peasycap->format_offset; - } - } - if (!peasycap_best_format) { - SAM("MISTAKE: peasycap_best_format is NULL"); - return -EINVAL; - } - peasycap_format = peasycap_best_format; - -/*...........................................................................*/ - if (try) - return peasycap_best_format - easycap_format; -/*...........................................................................*/ - - if (false != try) { - SAM("MISTAKE: true==try where is should be false\n"); - return -EINVAL; - } - SAM("actioning: %ix%i %s\n", - peasycap_format->v4l2_format.fmt.pix.width, - peasycap_format->v4l2_format.fmt.pix.height, - &peasycap_format->name[0]); - peasycap->height = peasycap_format->v4l2_format.fmt.pix.height; - peasycap->width = peasycap_format->v4l2_format.fmt.pix.width; - peasycap->pixelformat = peasycap_format->v4l2_format.fmt.pix.pixelformat; - peasycap->format_offset = peasycap_format - easycap_format; - - - for (k = 0; k < INPUT_MANY; k++) { - if (!peasycap->inputset[k].format_offset_ok) { - peasycap->inputset[k].format_offset = - peasycap->format_offset; - } - } - if ((0 <= peasycap->input) && (INPUT_MANY > peasycap->input)) { - peasycap->inputset[peasycap->input].format_offset = - peasycap->format_offset; - peasycap->inputset[peasycap->input].format_offset_ok = 1; - } else - JOM(8, "%i=peasycap->input\n", peasycap->input); - - - - peasycap->bytesperpixel = (0x00E0 & peasycap_format->mask) >> 5 ; - if (0x0100 & peasycap_format->mask) - peasycap->byteswaporder = true; - else - peasycap->byteswaporder = false; - if (0x0200 & peasycap_format->mask) - peasycap->skip = 5; - else - peasycap->skip = 0; - if (0x0800 & peasycap_format->mask) - peasycap->decimatepixel = true; - else - peasycap->decimatepixel = false; - if (0x1000 & peasycap_format->mask) - peasycap->offerfields = true; - else - peasycap->offerfields = false; - if (peasycap->decimatepixel) - multiplier = 2; - else - multiplier = 1; - peasycap->videofieldamount = - multiplier * peasycap->width * multiplier * peasycap->height; - peasycap->frame_buffer_used = - peasycap->bytesperpixel * peasycap->width * peasycap->height; - if (peasycap->video_isoc_streaming) { - resubmit = true; - easycap_video_kill_urbs(peasycap); - } else - resubmit = false; -/*---------------------------------------------------------------------------*/ -/* - * PAL - */ -/*---------------------------------------------------------------------------*/ - if (0 == (0x01 & peasycap_format->mask)) { - if (((720 == peasycap_format->v4l2_format.fmt.pix.width) && - (576 == peasycap_format->v4l2_format.fmt.pix.height)) || - ((360 == peasycap_format->v4l2_format.fmt.pix.width) && - (288 == peasycap_format->v4l2_format.fmt.pix.height))) { - if (set_resolution(p, 0x0000, 0x0001, 0x05A0, 0x0121)) { - SAM("ERROR: set_resolution() failed\n"); - return -EINVAL; - } - } else if ((704 == peasycap_format->v4l2_format.fmt.pix.width) && - (576 == peasycap_format->v4l2_format.fmt.pix.height)) { - if (set_resolution(p, 0x0004, 0x0001, 0x0584, 0x0121)) { - SAM("ERROR: set_resolution() failed\n"); - return -EINVAL; - } - } else if (((640 == peasycap_format->v4l2_format.fmt.pix.width) && - (480 == peasycap_format->v4l2_format.fmt.pix.height)) || - ((320 == peasycap_format->v4l2_format.fmt.pix.width) && - (240 == peasycap_format->v4l2_format.fmt.pix.height))) { - if (set_resolution(p, 0x0014, 0x0020, 0x0514, 0x0110)) { - SAM("ERROR: set_resolution() failed\n"); - return -EINVAL; - } - } else { - SAM("MISTAKE: bad format, cannot set resolution\n"); - return -EINVAL; - } -/*---------------------------------------------------------------------------*/ -/* - * NTSC - */ -/*---------------------------------------------------------------------------*/ - } else { - if (((720 == peasycap_format->v4l2_format.fmt.pix.width) && - (480 == peasycap_format->v4l2_format.fmt.pix.height)) || - ((360 == peasycap_format->v4l2_format.fmt.pix.width) && - (240 == peasycap_format->v4l2_format.fmt.pix.height))) { - if (set_resolution(p, 0x0000, 0x0003, 0x05A0, 0x00F3)) { - SAM("ERROR: set_resolution() failed\n"); - return -EINVAL; - } - } else if (((640 == peasycap_format->v4l2_format.fmt.pix.width) && - (480 == peasycap_format->v4l2_format.fmt.pix.height)) || - ((320 == peasycap_format->v4l2_format.fmt.pix.width) && - (240 == peasycap_format->v4l2_format.fmt.pix.height))) { - if (set_resolution(p, 0x0014, 0x0003, 0x0514, 0x00F3)) { - SAM("ERROR: set_resolution() failed\n"); - return -EINVAL; - } - } else { - SAM("MISTAKE: bad format, cannot set resolution\n"); - return -EINVAL; - } - } -/*---------------------------------------------------------------------------*/ - if (resubmit) - easycap_video_submit_urbs(peasycap); - - return peasycap_best_format - easycap_format; -} -/*****************************************************************************/ -int adjust_brightness(struct easycap *peasycap, int value) -{ - unsigned int mood; - int i1, k; - - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return -EFAULT; - } - if (!peasycap->pusb_device) { - SAM("ERROR: peasycap->pusb_device is NULL\n"); - return -EFAULT; - } - i1 = 0; - while (0xFFFFFFFF != easycap_control[i1].id) { - if (V4L2_CID_BRIGHTNESS == easycap_control[i1].id) { - if ((easycap_control[i1].minimum > value) || - (easycap_control[i1].maximum < value)) - value = easycap_control[i1].default_value; - - if ((easycap_control[i1].minimum <= peasycap->brightness) && - (easycap_control[i1].maximum >= peasycap->brightness)) { - if (peasycap->brightness == value) { - SAM("unchanged brightness at 0x%02X\n", - value); - return 0; - } - } - peasycap->brightness = value; - for (k = 0; k < INPUT_MANY; k++) { - if (!peasycap->inputset[k].brightness_ok) - peasycap->inputset[k].brightness = - peasycap->brightness; - } - if ((0 <= peasycap->input) && (INPUT_MANY > peasycap->input)) { - peasycap->inputset[peasycap->input].brightness = - peasycap->brightness; - peasycap->inputset[peasycap->input].brightness_ok = 1; - } else - JOM(8, "%i=peasycap->input\n", peasycap->input); - - mood = 0x00FF & (unsigned int)peasycap->brightness; - if (write_saa(peasycap->pusb_device, 0x0A, mood)) { - SAM("WARNING: failed to adjust brightness " - "to 0x%02X\n", mood); - return -ENOENT; - } - SAM("adjusting brightness to 0x%02X\n", mood); - return 0; - } - i1++; - } - SAM("WARNING: failed to adjust brightness: control not found\n"); - return -ENOENT; -} -/*****************************************************************************/ -int adjust_contrast(struct easycap *peasycap, int value) -{ - unsigned int mood; - int i1, k; - - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return -EFAULT; - } - if (!peasycap->pusb_device) { - SAM("ERROR: peasycap->pusb_device is NULL\n"); - return -EFAULT; - } - i1 = 0; - while (0xFFFFFFFF != easycap_control[i1].id) { - if (V4L2_CID_CONTRAST == easycap_control[i1].id) { - if ((easycap_control[i1].minimum > value) || - (easycap_control[i1].maximum < value)) - value = easycap_control[i1].default_value; - - - if ((easycap_control[i1].minimum <= peasycap->contrast) && - (easycap_control[i1].maximum >= peasycap->contrast)) { - if (peasycap->contrast == value) { - SAM("unchanged contrast at 0x%02X\n", value); - return 0; - } - } - peasycap->contrast = value; - for (k = 0; k < INPUT_MANY; k++) { - if (!peasycap->inputset[k].contrast_ok) - peasycap->inputset[k].contrast = peasycap->contrast; - } - - if ((0 <= peasycap->input) && (INPUT_MANY > peasycap->input)) { - peasycap->inputset[peasycap->input].contrast = - peasycap->contrast; - peasycap->inputset[peasycap->input].contrast_ok = 1; - } else - JOM(8, "%i=peasycap->input\n", peasycap->input); - - mood = 0x00FF & (unsigned int) (peasycap->contrast - 128); - if (write_saa(peasycap->pusb_device, 0x0B, mood)) { - SAM("WARNING: failed to adjust contrast to " - "0x%02X\n", mood); - return -ENOENT; - } - SAM("adjusting contrast to 0x%02X\n", mood); - return 0; - } - i1++; - } - SAM("WARNING: failed to adjust contrast: control not found\n"); - return -ENOENT; -} -/*****************************************************************************/ -int adjust_saturation(struct easycap *peasycap, int value) -{ - unsigned int mood; - int i1, k; - - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return -EFAULT; - } - if (!peasycap->pusb_device) { - SAM("ERROR: peasycap->pusb_device is NULL\n"); - return -EFAULT; - } - i1 = 0; - while (0xFFFFFFFF != easycap_control[i1].id) { - if (V4L2_CID_SATURATION == easycap_control[i1].id) { - if ((easycap_control[i1].minimum > value) || - (easycap_control[i1].maximum < value)) - value = easycap_control[i1].default_value; - - - if ((easycap_control[i1].minimum <= peasycap->saturation) && - (easycap_control[i1].maximum >= peasycap->saturation)) { - if (peasycap->saturation == value) { - SAM("unchanged saturation at 0x%02X\n", - value); - return 0; - } - } - peasycap->saturation = value; - for (k = 0; k < INPUT_MANY; k++) { - if (!peasycap->inputset[k].saturation_ok) - peasycap->inputset[k].saturation = - peasycap->saturation; - } - if ((0 <= peasycap->input) && (INPUT_MANY > peasycap->input)) { - peasycap->inputset[peasycap->input].saturation = - peasycap->saturation; - peasycap->inputset[peasycap->input].saturation_ok = 1; - } else - JOM(8, "%i=peasycap->input\n", peasycap->input); - mood = 0x00FF & (unsigned int) (peasycap->saturation - 128); - if (write_saa(peasycap->pusb_device, 0x0C, mood)) { - SAM("WARNING: failed to adjust saturation to " - "0x%02X\n", mood); - return -ENOENT; - } - SAM("adjusting saturation to 0x%02X\n", mood); - return 0; - break; - } - i1++; - } - SAM("WARNING: failed to adjust saturation: control not found\n"); - return -ENOENT; -} -/*****************************************************************************/ -int adjust_hue(struct easycap *peasycap, int value) -{ - unsigned int mood; - int i1, i2, k; - - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return -EFAULT; - } - if (!peasycap->pusb_device) { - SAM("ERROR: peasycap->pusb_device is NULL\n"); - return -EFAULT; - } - i1 = 0; - while (0xFFFFFFFF != easycap_control[i1].id) { - if (V4L2_CID_HUE == easycap_control[i1].id) { - if ((easycap_control[i1].minimum > value) || - (easycap_control[i1].maximum < value)) - value = easycap_control[i1].default_value; - - if ((easycap_control[i1].minimum <= peasycap->hue) && - (easycap_control[i1].maximum >= peasycap->hue)) { - if (peasycap->hue == value) { - SAM("unchanged hue at 0x%02X\n", value); - return 0; - } - } - peasycap->hue = value; - for (k = 0; k < INPUT_MANY; k++) { - if (!peasycap->inputset[k].hue_ok) - peasycap->inputset[k].hue = peasycap->hue; - } - if (0 <= peasycap->input && INPUT_MANY > peasycap->input) { - peasycap->inputset[peasycap->input].hue = peasycap->hue; - peasycap->inputset[peasycap->input].hue_ok = 1; - } else - JOM(8, "%i=peasycap->input\n", peasycap->input); - i2 = peasycap->hue - 128; - mood = 0x00FF & ((int) i2); - if (write_saa(peasycap->pusb_device, 0x0D, mood)) { - SAM("WARNING: failed to adjust hue to 0x%02X\n", mood); - return -ENOENT; - } - SAM("adjusting hue to 0x%02X\n", mood); - return 0; - break; - } - i1++; - } - SAM("WARNING: failed to adjust hue: control not found\n"); - return -ENOENT; -} -/*****************************************************************************/ -static int adjust_volume(struct easycap *peasycap, int value) -{ - s8 mood; - int i1; - - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return -EFAULT; - } - if (!peasycap->pusb_device) { - SAM("ERROR: peasycap->pusb_device is NULL\n"); - return -EFAULT; - } - i1 = 0; - while (0xFFFFFFFF != easycap_control[i1].id) { - if (V4L2_CID_AUDIO_VOLUME == easycap_control[i1].id) { - if ((easycap_control[i1].minimum > value) || - (easycap_control[i1].maximum < value)) - value = easycap_control[i1].default_value; - - if ((easycap_control[i1].minimum <= peasycap->volume) && - (easycap_control[i1].maximum >= peasycap->volume)) { - if (peasycap->volume == value) { - SAM("unchanged volume at 0x%02X\n", value); - return 0; - } - } - peasycap->volume = value; - mood = (16 > peasycap->volume) ? 16 : - ((31 < peasycap->volume) ? 31 : - (s8) peasycap->volume); - if (!easycap_audio_gainset(peasycap->pusb_device, mood)) { - SAM("WARNING: failed to adjust volume to " - "0x%2X\n", mood); - return -ENOENT; - } - SAM("adjusting volume to 0x%02X\n", mood); - return 0; - } - i1++; - } - SAM("WARNING: failed to adjust volume: control not found\n"); - return -ENOENT; -} -/*****************************************************************************/ -/*---------------------------------------------------------------------------*/ -/* - * AN ALTERNATIVE METHOD OF MUTING MIGHT SEEM TO BE: - * usb_set_interface(peasycap->pusb_device, - * peasycap->audio_interface, - * peasycap->audio_altsetting_off); - * HOWEVER, AFTER THIS COMMAND IS ISSUED ALL SUBSEQUENT URBS RECEIVE STATUS - * -ESHUTDOWN. THE HANDLER ROUTINE easyxxx_complete() DECLINES TO RESUBMIT - * THE URB AND THE PIPELINE COLLAPSES IRRETRIEVABLY. BEWARE. - */ -/*---------------------------------------------------------------------------*/ -static int adjust_mute(struct easycap *peasycap, int value) -{ - int i1; - - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return -EFAULT; - } - if (!peasycap->pusb_device) { - SAM("ERROR: peasycap->pusb_device is NULL\n"); - return -EFAULT; - } - i1 = 0; - while (0xFFFFFFFF != easycap_control[i1].id) { - if (V4L2_CID_AUDIO_MUTE == easycap_control[i1].id) { - peasycap->mute = value; - switch (peasycap->mute) { - case 1: { - peasycap->audio_idle = 1; - SAM("adjusting mute: %i=peasycap->audio_idle\n", - peasycap->audio_idle); - return 0; - } - default: { - peasycap->audio_idle = 0; - SAM("adjusting mute: %i=peasycap->audio_idle\n", - peasycap->audio_idle); - return 0; - } - } - break; - } - i1++; - } - SAM("WARNING: failed to adjust mute: control not found\n"); - return -ENOENT; -} -/*---------------------------------------------------------------------------*/ -long easycap_unlocked_ioctl(struct file *file, - unsigned int cmd, unsigned long arg) -{ - struct easycap *peasycap; - struct usb_device *p; - int kd; - - if (!file) { - SAY("ERROR: file is NULL\n"); - return -ERESTARTSYS; - } - peasycap = file->private_data; - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - return -1; - } - p = peasycap->pusb_device; - if (!p) { - SAM("ERROR: peasycap->pusb_device is NULL\n"); - return -EFAULT; - } - kd = easycap_isdongle(peasycap); - if (0 <= kd && DONGLE_MANY > kd) { - if (mutex_lock_interruptible(&easycapdc60_dongle[kd].mutex_video)) { - SAY("ERROR: cannot lock " - "easycapdc60_dongle[%i].mutex_video\n", kd); - return -ERESTARTSYS; - } - JOM(4, "locked easycapdc60_dongle[%i].mutex_video\n", kd); -/*---------------------------------------------------------------------------*/ -/* - * MEANWHILE, easycap_usb_disconnect() MAY HAVE FREED POINTER peasycap, - * IN WHICH CASE A REPEAT CALL TO isdongle() WILL FAIL. - * IF NECESSARY, BAIL OUT. - */ -/*---------------------------------------------------------------------------*/ - if (kd != easycap_isdongle(peasycap)) - return -ERESTARTSYS; - if (!file) { - SAY("ERROR: file is NULL\n"); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -ERESTARTSYS; - } - peasycap = file->private_data; - if (!peasycap) { - SAY("ERROR: peasycap is NULL\n"); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -ERESTARTSYS; - } - if (!peasycap->pusb_device) { - SAM("ERROR: peasycap->pusb_device is NULL\n"); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -ERESTARTSYS; - } - } else { -/*---------------------------------------------------------------------------*/ -/* - * IF easycap_usb_disconnect() HAS ALREADY FREED POINTER peasycap BEFORE THE - * ATTEMPT TO ACQUIRE THE SEMAPHORE, isdongle() WILL HAVE FAILED. BAIL OUT. - */ -/*---------------------------------------------------------------------------*/ - return -ERESTARTSYS; - } -/*---------------------------------------------------------------------------*/ - switch (cmd) { - case VIDIOC_QUERYCAP: { - struct v4l2_capability v4l2_capability; - char version[16], *p1, *p2; - int i, rc, k[3]; - long lng; - - JOM(8, "VIDIOC_QUERYCAP\n"); - - if (16 <= strlen(EASYCAP_DRIVER_VERSION)) { - SAM("ERROR: bad driver version string\n"); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } - strcpy(&version[0], EASYCAP_DRIVER_VERSION); - for (i = 0; i < 3; i++) - k[i] = 0; - p2 = &version[0]; - i = 0; - while (*p2) { - p1 = p2; - while (*p2 && ('.' != *p2)) - p2++; - if (*p2) - *p2++ = 0; - if (3 > i) { - rc = (int) strict_strtol(p1, 10, &lng); - if (rc) { - SAM("ERROR: %i=strict_strtol(%s,.,,)\n", - rc, p1); - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EINVAL; - } - k[i] = (int)lng; - } - i++; - } - - memset(&v4l2_capability, 0, sizeof(struct v4l2_capability)); - strlcpy(&v4l2_capability.driver[0], - "easycap", sizeof(v4l2_capability.driver)); - - v4l2_capability.capabilities = V4L2_CAP_VIDEO_CAPTURE | - V4L2_CAP_STREAMING | - V4L2_CAP_AUDIO | - V4L2_CAP_READWRITE; - - v4l2_capability.version = KERNEL_VERSION(k[0], k[1], k[2]); - JOM(8, "v4l2_capability.version=(%i,%i,%i)\n", k[0], k[1], k[2]); - - strlcpy(&v4l2_capability.card[0], - "EasyCAP DC60", sizeof(v4l2_capability.card)); - - if (usb_make_path(peasycap->pusb_device, - &v4l2_capability.bus_info[0], - sizeof(v4l2_capability.bus_info)) < 0) { - - strlcpy(&v4l2_capability.bus_info[0], "EasyCAP bus_info", - sizeof(v4l2_capability.bus_info)); - JOM(8, "%s=v4l2_capability.bus_info\n", - &v4l2_capability.bus_info[0]); - } - if (copy_to_user((void __user *)arg, &v4l2_capability, - sizeof(struct v4l2_capability))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - break; - } -/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ - case VIDIOC_ENUMINPUT: { - struct v4l2_input v4l2_input; - u32 index; - - JOM(8, "VIDIOC_ENUMINPUT\n"); - - if (copy_from_user(&v4l2_input, (void __user *)arg, - sizeof(struct v4l2_input))) { - mutex_unlock(&easycapdc60_dongle[kd].mutex_video); - return -EFAULT; - } - - index = v4l2_input.index; - memset(&v4l2_input, 0, sizeof(struct v4l2_input)); - - switch (index) { - case 0: { - v4l2_input.index = index; - strcpy(&v4l2_input.name[0], "CVBS0"); - v4l2_input.type = V4L2_INPUT_TYPE_CAMERA; - v4l2_input.audioset = 0x01; - v4l2_input.tuner = 0; - v4l2_input.std = V4L2_STD_PAL | - V4L2_STD_SECAM | - V4L2_STD_NTSC ; - v4l2_input.status = 0; - JOM(8, "%i=index: %s\n", index, &v4l2_input.name[0]); - break; - } - case 1: { - v4l2_input.index = index; - strcpy(&v4l2_input.name[0], "CVBS1"); - v4l2_input.type = V4L2_INPUT_TYPE_CAMERA; - v4l2_input.audioset = 0x01; - v4l2_input.tuner = 0; - v4l2_input.std = V4L2_STD_PAL | V4L2_STD_SECAM | - V4L2_STD_NTSC; - v4l2_input.status = 0; - JOM(8, "%i=index: %s\n", index, &v4l2_input.name[0]); - break; - } - case 2: { - v4l2_input.index = index; - strcpy(&v4l2_input.name[0], "CVBS2"); - v4l2_input.type = V4L2_INPUT_TYPE_CAMERA; - v4l2_input.audioset = 0x01; - v4l2_input.tuner = 0; - v4l2_input.std = V4L2_STD_PAL | V4L2_STD_SECAM | - V4L2_STD_NTSC ; - v4l2_input.status = 0; - JOM(8, "%i=index: %s\n", index, &v4l2_input.name[0]); - break; - } - case 3: { - v4l2_input.index = index; - strcpy(&v4l2_input.name[0], "CVBS3"); - v4l2_input.type = V4L2_INPUT_TYPE_CAMERA; - v4l2_input.audioset = 0x01; - v4l2_input.tuner = 0; - v4l2_input.std = V4L2_STD_PAL | V4L2_STD_SECAM | - V4L2_STD_NTSC ; - v4l2_input.status = 0; - JOM(8, "%i=index: %s\n", index, &v4l2_input.name[0]); - break; - } - case 4: { - v4l2_input.index = index; - strcpy(&v4l2_input.name[0], "CVBS4"); - v4l2_input.type = V4L2_INPUT_TYPE_CAMERA; - v4l2_input.audioset = 0x01; - v4l2_input.tuner = 0; - v4l2_input.std = V4L2_STD_PAL | V4L2_STD_SECAM | - V4L2_STD_NTSC ; - v4l2_input.status = 0; - JOM(8, "%i=index: %s\n", index, &v4l2_input.name[0]); - break; - } - case 5: { - v4l2_input.index = index; - strcpy(&v4l2_input.name[0], "S-VIDEO"); - v4l2_input.type = V4L2_INPUT_TYPE_CAMERA; - v4l2_input.audioset = 0x01; - v4l2_input.tuner = 0; - v4l2_input.std = V4L2_STD_PAL | V4L2_STD_SECAM