From 1c1266bb916e6a6b362d3be95f2cc7f3c41277a6 Mon Sep 17 00:00:00 2001 From: Yehuda Sadeh Date: Wed, 12 Jan 2011 16:53:27 -0800 Subject: ceph: fix getattr on directory when using norbytes The norbytes mount option was broken, and when doing getattr on a directory it return the rbytes instead of the number of entities. This commit fixes it. Signed-off-by: Yehuda Sadeh Signed-off-by: Sage Weil --- fs/ceph/inode.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c index e791fa34b23..50001de66c6 100644 --- a/fs/ceph/inode.c +++ b/fs/ceph/inode.c @@ -701,10 +701,6 @@ static int fill_inode(struct inode *inode, ci->i_ceph_flags |= CEPH_I_COMPLETE; ci->i_max_offset = 2; } - - /* it may be better to set st_size in getattr instead? */ - if (ceph_test_mount_opt(ceph_sb_to_client(inode->i_sb), RBYTES)) - inode->i_size = ci->i_rbytes; break; default: pr_err("fill_inode %llx.%llx BAD mode 0%o\n", @@ -1805,7 +1801,11 @@ int ceph_getattr(struct vfsmount *mnt, struct dentry *dentry, else stat->dev = 0; if (S_ISDIR(inode->i_mode)) { - stat->size = ci->i_rbytes; + if (ceph_test_mount_opt(ceph_sb_to_client(inode->i_sb), + RBYTES)) + stat->size = ci->i_rbytes; + else + stat->size = ci->i_files + ci->i_subdirs; stat->blocks = 0; stat->blksize = 65536; } -- cgit v1.2.3-18-g5258 From 17db143fc091238c43ab9f373974ca2224a4c3f8 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Thu, 13 Jan 2011 15:27:29 -0800 Subject: ceph: fix xattr rbtree search Fix xattr name comparison in rbtree search for strings that share a prefix. The *name argument is null terminated, but the xattr name is not, so we need to use strncmp, but that means adjusting for the case where name is a prefix of xattr->name. The corresponding case in __set_xattr() already handles this properly (although in that case *name is also not null terminated). Reported-by: Sergiy Kibrik Signed-off-by: Sage Weil --- fs/ceph/xattr.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/ceph/xattr.c b/fs/ceph/xattr.c index 6e12a6ba5f7..8c9eba6ef9d 100644 --- a/fs/ceph/xattr.c +++ b/fs/ceph/xattr.c @@ -219,6 +219,7 @@ static struct ceph_inode_xattr *__get_xattr(struct ceph_inode_info *ci, struct rb_node **p; struct rb_node *parent = NULL; struct ceph_inode_xattr *xattr = NULL; + int name_len = strlen(name); int c; p = &ci->i_xattrs.index.rb_node; @@ -226,6 +227,8 @@ static struct ceph_inode_xattr *__get_xattr(struct ceph_inode_info *ci, parent = *p; xattr = rb_entry(parent, struct ceph_inode_xattr, node); c = strncmp(name, xattr->name, xattr->name_len); + if (c == 0 && name_len > xattr->name_len) + c = 1; if (c < 0) p = &(*p)->rb_left; else if (c > 0) -- cgit v1.2.3-18-g5258 From 7111ebc97ed53a32314011c85a6f235f0dab8ae8 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Tue, 14 Dec 2010 13:24:55 -0800 Subject: xhci: Resume bus on any port status change. The original code that resumed the USB bus on a port status change would only do so when there was a device connected to the port. If a device was just disconnected, the event would be queued for khubd, but khubd wouldn't run. That would leave the connect status change (CSC) bit set. If a USB device was plugged into that same port, the xHCI host controller would set the current connect status (CCS) bit. But since the CSC bit was already set, it would not generate an interrupt for a port status change event. That would mean the user could "Safely Remove" a device, have the bus suspend, disconnect the device, re-plug it in, and then the device would never be enumerated. Plugging in a different device on another port would cause the bus to resume, and khubd would notice the re-connected device. Running lsusb would also resume the bus, leading users to report the problem "went away" when using diagnostic tools. The solution is to resume the bus when a port status change event is received, regardless of the port status. Thank you very much to Maddog for helping me track down this Heisenbug. This patch should be queued for the 2.6.37 stable tree. Signed-off-by: Sarah Sharp Reported-by: Jon 'maddog' Hall Tested-by: Andiry Xu Cc: stable@kernel.org --- drivers/usb/host/xhci-ring.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index df558f6f84e..62c70c230e8 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1188,7 +1188,7 @@ static void handle_port_status(struct xhci_hcd *xhci, addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS * (port_id - 1); temp = xhci_readl(xhci, addr); - if ((temp & PORT_CONNECT) && (hcd->state == HC_STATE_SUSPENDED)) { + if (hcd->state == HC_STATE_SUSPENDED) { xhci_dbg(xhci, "resume root hub\n"); usb_hcd_resume_root_hub(hcd); } -- cgit v1.2.3-18-g5258 From 0029227f1bc30b6c809ae751f9e7af6cef900997 Mon Sep 17 00:00:00 2001 From: Andiry Xu Date: Mon, 27 Dec 2010 17:39:02 +0800 Subject: xHCI: synchronize irq in xhci_suspend() Synchronize the interrupts instead of free them in xhci_suspend(). This will prevent a double free when the host is suspended and then the card removed. Set the flag hcd->msix_enabled when using MSI-X, and check the flag in suspend_common(). MSI-X synchronization will be handled by xhci_suspend(), and MSI/INTx will be synchronized in suspend_common(). This patch should be queued for the 2.6.37 stable tree. Reported-by: Matthew Garrett Signed-off-by: Andiry Xu Signed-off-by: Sarah Sharp Cc: stable@kernel.org --- drivers/usb/core/hcd-pci.c | 7 ++++++- drivers/usb/host/xhci.c | 46 +++++++++++++++------------------------------- include/linux/usb/hcd.h | 1 + 3 files changed, 22 insertions(+), 32 deletions(-) diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index b55d46070a2..f71e8e307e0 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -405,7 +405,12 @@ static int suspend_common(struct device *dev, bool do_wakeup) return retval; } - synchronize_irq(pci_dev->irq); + /* If MSI-X is enabled, the driver will have synchronized all vectors + * in pci_suspend(). If MSI or legacy PCI is enabled, that will be + * synchronized here. + */ + if (!hcd->msix_enabled) + synchronize_irq(pci_dev->irq); /* Downstream ports from this root hub should already be quiesced, so * there will be no DMA activity. Now we can shut down the upstream diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 45e4a3108cc..d48edfa5043 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -226,7 +226,8 @@ static int xhci_setup_msi(struct xhci_hcd *xhci) static int xhci_setup_msix(struct xhci_hcd *xhci) { int i, ret = 0; - struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); + struct usb_hcd *hcd = xhci_to_hcd(xhci); + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); /* * calculate number of msi-x vectors supported. @@ -265,6 +266,7 @@ static int xhci_setup_msix(struct xhci_hcd *xhci) goto disable_msix; } + hcd->msix_enabled = 1; return ret; disable_msix: @@ -280,7 +282,8 @@ free_entries: /* Free any IRQs and disable MSI-X */ static void xhci_cleanup_msix(struct xhci_hcd *xhci) { - struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); + struct usb_hcd *hcd = xhci_to_hcd(xhci); + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); xhci_free_irq(xhci); @@ -292,6 +295,7 @@ static void xhci_cleanup_msix(struct xhci_hcd *xhci) pci_disable_msi(pdev); } + hcd->msix_enabled = 0; return; } @@ -647,6 +651,7 @@ int xhci_suspend(struct xhci_hcd *xhci) int rc = 0; struct usb_hcd *hcd = xhci_to_hcd(xhci); u32 command; + int i; spin_lock_irq(&xhci->lock); clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); @@ -677,10 +682,15 @@ int xhci_suspend(struct xhci_hcd *xhci) spin_unlock_irq(&xhci->lock); return -ETIMEDOUT; } - /* step 5: remove core well power */ - xhci_cleanup_msix(xhci); spin_unlock_irq(&xhci->lock); + /* step 5: remove core well power */ + /* synchronize irq when using MSI-X */ + if (xhci->msix_entries) { + for (i = 0; i < xhci->msix_count; i++) + synchronize_irq(xhci->msix_entries[i].vector); + } + return rc; } @@ -694,7 +704,6 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) { u32 command, temp = 0; struct usb_hcd *hcd = xhci_to_hcd(xhci); - struct pci_dev *pdev = to_pci_dev(hcd->self.controller); int old_state, retval; old_state = hcd->state; @@ -729,9 +738,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) xhci_dbg(xhci, "Stop HCD\n"); xhci_halt(xhci); xhci_reset(xhci); - if (hibernated) - xhci_cleanup_msix(xhci); spin_unlock_irq(&xhci->lock); + xhci_cleanup_msix(xhci); #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING /* Tell the event ring poll function not to reschedule */ @@ -765,30 +773,6 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) return retval; } - spin_unlock_irq(&xhci->lock); - /* Re-setup MSI-X */ - if (hcd->irq) - free_irq(hcd->irq, hcd); - hcd->irq = -1; - - retval = xhci_setup_msix(xhci); - if (retval) - /* fall back to msi*/ - retval = xhci_setup_msi(xhci); - - if (retval) { - /* fall back to legacy interrupt*/ - retval = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED, - hcd->irq_descr, hcd); - if (retval) { - xhci_err(xhci, "request interrupt %d failed\n", - pdev->irq); - return retval; - } - hcd->irq = pdev->irq; - } - - spin_lock_irq(&xhci->lock); /* step 4: set Run/Stop bit */ command = xhci_readl(xhci, &xhci->op_regs->command); command |= CMD_RUN; diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index dd6ee49a084..a854fe89484 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -112,6 +112,7 @@ struct usb_hcd { /* Flags that get set only during HCD registration or removal. */ unsigned rh_registered:1;/* is root hub registered? */ unsigned rh_pollable:1; /* may we poll the root hub? */ + unsigned msix_enabled:1; /* driver has MSI-X enabled? */ /* The next flag is a stopgap, to be removed when all the HCDs * support the new root-hub polling mechanism. */ -- cgit v1.2.3-18-g5258 From 40a9fb17f32dbe54de3d636142a59288544deed7 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Fri, 17 Dec 2010 13:17:04 -0800 Subject: xhci: Do not run xhci_cleanup_msix with irq disabled when unloading xhci_hcd, I got: [ 134.856813] xhci_hcd 0000:02:00.0: remove, state 4 [ 134.858140] usb usb3: USB disconnect, address 1 [ 134.874956] xhci_hcd 0000:02:00.0: Host controller not halted, aborting reset. [ 134.876351] BUG: sleeping function called from invalid context at kernel/mutex.c:85 [ 134.877657] in_atomic(): 0, irqs_disabled(): 1, pid: 1451, name: modprobe [ 134.878975] Pid: 1451, comm: modprobe Not tainted 2.6.37-rc5+ #162 [ 134.880298] Call Trace: [ 134.881602] [] __might_sleep+0xeb/0xf0 [ 134.882921] [] mutex_lock+0x24/0x50 [ 134.884229] [] free_desc+0x2e/0x5f [ 134.885538] [] irq_free_descs+0x3b/0x71 [ 134.886853] [] free_irq_at+0x31/0x36 [ 134.888167] [] destroy_irq+0x69/0x71 [ 134.889486] [] native_teardown_msi_irq+0xe/0x10 [ 134.890820] [] default_teardown_msi_irqs+0x57/0x80 [ 134.892158] [] free_msi_irqs+0x8b/0xe9 [ 134.893504] [] pci_disable_msix+0x35/0x39 [ 134.894844] [] xhci_cleanup_msix+0x31/0x51 [xhci_hcd] [ 134.896186] [] xhci_stop+0x3a/0x80 [xhci_hcd] [ 134.897521] [] usb_remove_hcd+0xfd/0x14a [ 134.898859] [] usb_hcd_pci_remove+0x5c/0xc6 [ 134.900193] [] pci_device_remove+0x3f/0x91 [ 134.901535] [] __device_release_driver+0x83/0xd9 [ 134.902899] [] driver_detach+0x86/0xad [ 134.904222] [] bus_remove_driver+0xb2/0xd8 [ 134.905540] [] driver_unregister+0x6c/0x74 [ 134.906839] [] pci_unregister_driver+0x44/0x89 [ 134.908121] [] xhci_unregister_pci+0x15/0x17 [xhci_hcd] [ 134.909396] [] xhci_hcd_cleanup+0xe/0x10 [xhci_hcd] [ 134.910652] [] sys_delete_module+0x1ca/0x23b [ 134.911882] [] ? path_put+0x22/0x26 [ 134.913104] [] ? audit_syscall_entry+0x2c/0x148 [ 134.914333] [] system_call_fastpath+0x16/0x1b [ 134.915658] xhci_hcd 0000:02:00.0: USB bus 3 deregistered [ 134.916465] xhci_hcd 0000:02:00.0: PCI INT A disabled and the same issue when xhci_suspend is invoked. (Note from Sarah: That's fixed by Andiry's patch before this, by synchronizing the irqs rather than freeing them on suspend.) Do not run xhci_cleanup_msix with irq disabled. This patch should be queued for the 2.6.37 stable tree. Signed-off-by: Zhang Rui Signed-off-by: Sarah Sharp Cc: stable@kernel.org --- drivers/usb/host/xhci.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index d48edfa5043..b2c56d15fb4 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -512,9 +512,10 @@ void xhci_stop(struct usb_hcd *hcd) spin_lock_irq(&xhci->lock); xhci_halt(xhci); xhci_reset(xhci); - xhci_cleanup_msix(xhci); spin_unlock_irq(&xhci->lock); + xhci_cleanup_msix(xhci); + #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING /* Tell the event ring poll function not to reschedule */ xhci->zombie = 1; @@ -548,9 +549,10 @@ void xhci_shutdown(struct usb_hcd *hcd) spin_lock_irq(&xhci->lock); xhci_halt(xhci); - xhci_cleanup_msix(xhci); spin_unlock_irq(&xhci->lock); + xhci_cleanup_msix(xhci); + xhci_dbg(xhci, "xhci_shutdown completed - status = %x\n", xhci_readl(xhci, &xhci->op_regs->status)); } -- cgit v1.2.3-18-g5258 From 1b9a50d931a04ba007cc1a926fead3ff4b5afa9b Mon Sep 17 00:00:00 2001 From: maximilian attems Date: Thu, 13 Jan 2011 15:34:20 +0100 Subject: deb-pkg: Use $SRCARCH for include path Fix x86 centric path to allow building kernel-header packages for other architecture. Signed-off-by: maximilian attems Signed-off-by: Michal Marek --- scripts/package/builddeb | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/package/builddeb b/scripts/package/builddeb index b0b2357aef4..ebc6d6e9d77 100644 --- a/scripts/package/builddeb +++ b/scripts/package/builddeb @@ -239,7 +239,7 @@ fi # Build header package find . -name Makefile -o -name Kconfig\* -o -name \*.pl > /tmp/files$$ -find arch/x86/include include scripts -type f >> /tmp/files$$ +find arch/$SRCARCH/include include scripts -type f >> /tmp/files$$ (cd $objtree; find .config Module.symvers include scripts -type f >> /tmp/objfiles$$) destdir=$kernel_headers_dir/usr/src/linux-headers-$version mkdir -p "$destdir" -- cgit v1.2.3-18-g5258 From 653a39d1f61bdc9f277766736d21d2e9be0391cb Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Thu, 23 Dec 2010 11:12:42 -0800 Subject: usb: Realloc xHCI structures after a hub is verified. When there's an xHCI host power loss after a suspend from memory, the USB core attempts to reset and verify the USB devices that are attached to the system. The xHCI driver has to reallocate those devices, since the hardware lost all knowledge of them during the power loss. When a hub is plugged in, and the host loses power, the xHCI hardware structures are not updated to say the device is a hub. This is usually done in hub_configure() when the USB hub is detected. That function is skipped during a reset and verify by the USB core, since the core restores the old configuration and alternate settings, and the hub driver has no idea this happened. This bug makes the xHCI host controller reject the enumeration of low speed devices under the resumed hub. Therefore, make the USB core re-setup the internal xHCI hub device information by calling update_hub_device() when hub_activate() is called for a hub reset resume. After a host power loss, all devices under the roothub get a reset-resume or a disconnect. This patch should be queued for the 2.6.37 stable tree. Signed-off-by: Sarah Sharp Cc: stable@kernel.org --- drivers/usb/core/hub.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index b98efae6a1c..4310cc4b1cb 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -676,6 +676,8 @@ static void hub_init_func3(struct work_struct *ws); static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) { struct usb_device *hdev = hub->hdev; + struct usb_hcd *hcd; + int ret; int port1; int status; bool need_debounce_delay = false; @@ -714,6 +716,25 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) usb_autopm_get_interface_no_resume( to_usb_interface(hub->intfdev)); return; /* Continues at init2: below */ + } else if (type == HUB_RESET_RESUME) { + /* The internal host controller state for the hub device + * may be gone after a host power loss on system resume. + * Update the device's info so the HW knows it's a hub. + */ + hcd = bus_to_hcd(hdev->bus); + if (hcd->driver->update_hub_device) { + ret = hcd->driver->update_hub_device(hcd, hdev, + &hub->tt, GFP_NOIO); + if (ret < 0) { + dev_err(hub->intfdev, "Host not " + "accepting hub info " + "update.\n"); + dev_err(hub->intfdev, "LS/FS devices " + "and hubs may not work " + "under this hub\n."); + } + } + hub_power_on(hub, true); } else { hub_power_on(hub, true); } -- cgit v1.2.3-18-g5258 From a6d940dd759bf240d28624198660ed34582a327b Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Tue, 28 Dec 2010 13:08:42 -0800 Subject: xhci: Use GFP_NOIO during device reset. When xhci_discover_or_reset_device() is called after a host controller power loss, the virtual device may need to be reallocated. Make sure xhci_alloc_dev() uses GFP_NOIO. This avoid causing a deadlock by allowing the kernel to flush pending I/O while reallocating memory for a virtual device for a USB mass storage device that's holding the backing store for dirty memory buffers. This patch should be queued for the 2.6.37 stable tree. Signed-off-by: Sarah Sharp Cc: stable@kernel.org --- drivers/usb/host/xhci.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index b2c56d15fb4..34cf4e16587 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -2431,8 +2431,12 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) xhci_err(xhci, "Error while assigning device slot ID\n"); return 0; } - /* xhci_alloc_virt_device() does not touch rings; no need to lock */ - if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_KERNEL)) { + /* xhci_alloc_virt_device() does not touch rings; no need to lock. + * Use GFP_NOIO, since this function can be called from + * xhci_discover_or_reset_device(), which may be called as part of + * mass storage driver error handling. + */ + if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_NOIO)) { /* Disable slot, if we can do it without mem alloc */ xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n"); spin_lock_irqsave(&xhci->lock, flags); -- cgit v1.2.3-18-g5258 From 47cbf6925cd0ef8af4b8165b43a60b5f37c36d8a Mon Sep 17 00:00:00 2001 From: Andiry Xu Date: Mon, 20 Dec 2010 14:49:48 +0800 Subject: xHCI: fix queue_trb in isoc transfer Fix the more_trbs_coming field of queue_trb() in isoc transfer. Signed-off-by: Andiry Xu Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-ring.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 62c70c230e8..55dc1567506 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2900,6 +2900,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, int running_total, trb_buff_len, td_len, td_remain_len, ret; u64 start_addr, addr; int i, j; + bool more_trbs_coming; ep_ring = xhci->devs[slot_id]->eps[ep_index].ring; @@ -2965,9 +2966,11 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, */ if (j < trbs_per_td - 1) { field |= TRB_CHAIN; + more_trbs_coming = true; } else { td->last_trb = ep_ring->enqueue; field |= TRB_IOC; + more_trbs_coming = false; } /* Calculate TRB length */ @@ -2980,7 +2983,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, length_field = TRB_LEN(trb_buff_len) | remainder | TRB_INTR_TARGET(0); - queue_trb(xhci, ep_ring, false, false, + queue_trb(xhci, ep_ring, false, more_trbs_coming, lower_32_bits(addr), upper_32_bits(addr), length_field, -- cgit v1.2.3-18-g5258 From e1eab2e00015bfe48388920ff287efdbefb6af24 Mon Sep 17 00:00:00 2001 From: Andiry Xu Date: Tue, 4 Jan 2011 16:30:39 -0800 Subject: xHCI: remove redundant parameter in giveback_first_trb() Parameter *td is not used in giveback_first_trb(). Remove it. Signed-off-by: Andiry Xu Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-ring.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 55dc1567506..59f81b56048 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2414,7 +2414,7 @@ static void check_trb_math(struct urb *urb, int num_trbs, int running_total) static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id, unsigned int ep_index, unsigned int stream_id, int start_cycle, - struct xhci_generic_trb *start_trb, struct xhci_td *td) + struct xhci_generic_trb *start_trb) { /* * Pass all the TRBs to the hardware at once and make sure this write @@ -2625,7 +2625,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, check_trb_math(urb, num_trbs, running_total); giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id, - start_cycle, start_trb, td); + start_cycle, start_trb); return 0; } @@ -2757,7 +2757,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, check_trb_math(urb, num_trbs, running_total); giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id, - start_cycle, start_trb, td); + start_cycle, start_trb); return 0; } @@ -2859,7 +2859,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, field | TRB_IOC | TRB_TYPE(TRB_STATUS) | ep_ring->cycle_state); giveback_first_trb(xhci, slot_id, ep_index, 0, - start_cycle, start_trb, td); + start_cycle, start_trb); return 0; } @@ -3006,10 +3006,8 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, } } - wmb(); - start_trb->field[3] |= start_cycle; - - xhci_ring_ep_doorbell(xhci, slot_id, ep_index, urb->stream_id); + giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id, + start_cycle, start_trb); return 0; } -- cgit v1.2.3-18-g5258 From 50f7b52a83a893929edf87a89ebc081ff26a7b91 Mon Sep 17 00:00:00 2001 From: Andiry Xu Date: Mon, 20 Dec 2010 15:09:34 +0800 Subject: xHCI: fix cycle bit set in giveback_first_trb() giveback_first_trb() controls the cycle bit set of the start_trb, to ensure that the start_trb is written last and the host controller will receive a whole td at a time. However, if the ring is wrapped and cycle bit is toggled to zero, then giveback_first_trb() will be of no effect. In this case, set the cycle bit of start_trb to 1 at the beginning and clear it in giveback_first_trb(). Signed-off-by: Andiry Xu Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-ring.c | 28 +++++++++++++++++++++------- 1 file changed, 21 insertions(+), 7 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 59f81b56048..1ee6de92193 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2421,7 +2421,10 @@ static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id, * isn't reordered. */ wmb(); - start_trb->field[3] |= start_cycle; + if (start_cycle) + start_trb->field[3] |= start_cycle; + else + start_trb->field[3] &= ~0x1; xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id); } @@ -2551,9 +2554,11 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, u32 remainder = 0; /* Don't change the cycle bit of the first TRB until later */ - if (first_trb) + if (first_trb) { first_trb = false; - else + if (start_cycle == 0) + field |= 0x1; + } else field |= ep_ring->cycle_state; /* Chain all the TRBs together; clear the chain bit in the last @@ -2711,9 +2716,11 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, field = 0; /* Don't change the cycle bit of the first TRB until later */ - if (first_trb) + if (first_trb) { first_trb = false; - else + if (start_cycle == 0) + field |= 0x1; + } else field |= ep_ring->cycle_state; /* Chain all the TRBs together; clear the chain bit in the last @@ -2818,13 +2825,17 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, /* Queue setup TRB - see section 6.4.1.2.1 */ /* FIXME better way to translate setup_packet into two u32 fields? */ setup = (struct usb_ctrlrequest *) urb->setup_packet; + field = 0; + field |= TRB_IDT | TRB_TYPE(TRB_SETUP); + if (start_cycle == 0) + field |= 0x1; queue_trb(xhci, ep_ring, false, true, /* FIXME endianness is probably going to bite my ass here. */ setup->bRequestType | setup->bRequest << 8 | setup->wValue << 16, setup->wIndex | setup->wLength << 16, TRB_LEN(8) | TRB_INTR_TARGET(0), /* Immediate data in pointer */ - TRB_IDT | TRB_TYPE(TRB_SETUP)); + field); /* If there's data, queue data TRBs */ field = 0; @@ -2951,7 +2962,10 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, field |= TRB_TYPE(TRB_ISOC); /* Assume URB_ISO_ASAP is set */ field |= TRB_SIA; - if (i > 0) + if (i == 0) { + if (start_cycle == 0) + field |= 0x1; + } else field |= ep_ring->cycle_state; first_trb = false; } else { -- cgit v1.2.3-18-g5258 From f2c565e223af39ed38be5c84b1a37b591b22db83 Mon Sep 17 00:00:00 2001 From: Andiry Xu Date: Mon, 20 Dec 2010 17:12:24 +0800 Subject: xHCI: replace dev_dbg() with xhci_dbg() dev_dbg() is used to print ordinary transfer messages in xhci-ring.c. System log messages will be flushed if CONFIG_USB_DEBUG is set. Replace the dev_dbg() with xhci_dbg(). Signed-off-by: Andiry Xu Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-ring.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 1ee6de92193..e38f7ece0a6 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1710,8 +1710,7 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td, /* Others already handled above */ break; } - dev_dbg(&td->urb->dev->dev, - "ep %#x - asked for %d bytes, " + xhci_dbg(xhci, "ep %#x - asked for %d bytes, " "%d bytes untransferred\n", td->urb->ep->desc.bEndpointAddress, td->urb->transfer_buffer_length, @@ -2389,7 +2388,8 @@ static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb) } xhci_dbg(xhci, "\n"); if (!in_interrupt()) - dev_dbg(&urb->dev->dev, "ep %#x - urb len = %d, sglist used, num_trbs = %d\n", + xhci_dbg(xhci, "ep %#x - urb len = %d, sglist used, " + "num_trbs = %d\n", urb->ep->desc.bEndpointAddress, urb->transfer_buffer_length, num_trbs); @@ -2676,7 +2676,8 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, /* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */ if (!in_interrupt()) - dev_dbg(&urb->dev->dev, "ep %#x - urb len = %#x (%d), addr = %#llx, num_trbs = %d\n", + xhci_dbg(xhci, "ep %#x - urb len = %#x (%d), " + "addr = %#llx, num_trbs = %d\n", urb->ep->desc.bEndpointAddress, urb->transfer_buffer_length, urb->transfer_buffer_length, @@ -2922,7 +2923,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, } if (!in_interrupt()) - dev_dbg(&urb->dev->dev, "ep %#x - urb len = %#x (%d)," + xhci_dbg(xhci, "ep %#x - urb len = %#x (%d)," " addr = %#llx, num_tds = %d\n", urb->ep->desc.bEndpointAddress, urb->transfer_buffer_length, -- cgit v1.2.3-18-g5258 From 7961acd7327fe48e55abef277630abdbb3f2081a Mon Sep 17 00:00:00 2001 From: Andiry Xu Date: Mon, 20 Dec 2010 17:14:20 +0800 Subject: xHCI: fix printk_ratelimit() usage printk_ratelimit() is misused in xhci-ring.c. Signed-off-by: Andiry Xu Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-ring.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index e38f7ece0a6..2116c0f6495 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2452,7 +2452,7 @@ int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, * to set the polling interval (once the API is added). */ if (xhci_interval != ep_interval) { - if (!printk_ratelimit()) + if (printk_ratelimit()) dev_dbg(&urb->dev->dev, "Driver uses different interval" " (%d microframe%s) than xHCI " "(%d microframe%s)\n", @@ -3080,7 +3080,7 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags, * to set the polling interval (once the API is added). */ if (xhci_interval != ep_interval) { - if (!printk_ratelimit()) + if (printk_ratelimit()) dev_dbg(&urb->dev->dev, "Driver uses different interval" " (%d microframe%s) than xHCI " "(%d microframe%s)\n", -- cgit v1.2.3-18-g5258 From 50d64676d132a8a72a1a1657d7b3e6efa53da1ac Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Wed, 15 Dec 2010 14:18:11 -0500 Subject: xhci: Remove more doorbell-related reads The unused space in the doorbell is now marked as RsvdZ, not RsvdP, so we can avoid reading the doorbell before writing it. Update the doorbell-related defines to produce the entire doorbell value from a single macro. Document the doorbell format in a comment. Signed-off-by: Matthew Wilcox Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-ring.c | 27 +++++++++++---------------- drivers/usb/host/xhci.h | 16 ++++++---------- 2 files changed, 17 insertions(+), 26 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 2116c0f6495..3e8211c1ce5 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -308,11 +308,8 @@ static int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring, /* Ring the host controller doorbell after placing a command on the ring */ void xhci_ring_cmd_db(struct xhci_hcd *xhci) { - u32 temp; - xhci_dbg(xhci, "// Ding dong!\n"); - temp = xhci_readl(xhci, &xhci->dba->doorbell[0]) & DB_MASK; - xhci_writel(xhci, temp | DB_TARGET_HOST, &xhci->dba->doorbell[0]); + xhci_writel(xhci, DB_VALUE_HOST, &xhci->dba->doorbell[0]); /* Flush PCI posted writes */ xhci_readl(xhci, &xhci->dba->doorbell[0]); } @@ -322,26 +319,24 @@ void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int ep_index, unsigned int stream_id) { - struct xhci_virt_ep *ep; - unsigned int ep_state; - u32 field; __u32 __iomem *db_addr = &xhci->dba->doorbell[slot_id]; + struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index]; + unsigned int ep_state = ep->ep_state; - ep = &xhci->devs[slot_id]->eps[ep_index]; - ep_state = ep->ep_state; /* Don't ring the doorbell for this endpoint if there are pending - * cancellations because the we don't want to interrupt processing. + * cancellations because we don't want to interrupt processing. * We don't want to restart any stream rings if there's a set dequeue * pointer command pending because the device can choose to start any * stream once the endpoint is on the HW schedule. * FIXME - check all the stream rings for pending cancellations. */ - if (!(ep_state & EP_HALT_PENDING) && !(ep_state & SET_DEQ_PENDING) - && !(ep_state & EP_HALTED)) { - field = xhci_readl(xhci, db_addr) & DB_MASK; - field |= EPI_TO_DB(ep_index) | STREAM_ID_TO_DB(stream_id); - xhci_writel(xhci, field, db_addr); - } + if ((ep_state & EP_HALT_PENDING) || (ep_state & SET_DEQ_PENDING) || + (ep_state & EP_HALTED)) + return; + xhci_writel(xhci, DB_VALUE(ep_index, stream_id), db_addr); + /* The CPU has better things to do at this point than wait for a + * write-posting flush. It'll get there soon enough. + */ } /* Ring the doorbell for any rings with pending URBs */ diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 170c367112d..7f236fd2201 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -436,22 +436,18 @@ struct xhci_run_regs { /** * struct doorbell_array * + * Bits 0 - 7: Endpoint target + * Bits 8 - 15: RsvdZ + * Bits 16 - 31: Stream ID + * * Section 5.6 */ struct xhci_doorbell_array { u32 doorbell[256]; }; -#define DB_TARGET_MASK 0xFFFFFF00 -#define DB_STREAM_ID_MASK 0x0000FFFF -#define DB_TARGET_HOST 0x0 -#define DB_STREAM_ID_HOST 0x0 -#define DB_MASK (0xff << 8) - -/* Endpoint Target - bits 0:7 */ -#define EPI_TO_DB(p) (((p) + 1) & 0xff) -#define STREAM_ID_TO_DB(p) (((p) & 0xffff) << 16) - +#define DB_VALUE(ep, stream) ((((ep) + 1) & 0xff) | ((stream) << 16)) +#define DB_VALUE_HOST 0x00000000 /** * struct xhci_protocol_caps -- cgit v1.2.3-18-g5258 From a28287925555c93984115d37a1a25315ea369764 Mon Sep 17 00:00:00 2001 From: Dimitris Papastamos Date: Wed, 19 Jan 2011 12:55:28 +0000 Subject: ASoC: WM8995: Fix incorrect use of snd_soc_update_bits() In the wm8995_set_tristate() function when updating the register bits use the value and not the register index as the value argument. Signed-off-by: Dimitris Papastamos Acked-by: Liam Girdwood Signed-off-by: Mark Brown Cc: stable@kernel.org --- sound/soc/codecs/wm8995.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8995.c b/sound/soc/codecs/wm8995.c index 6045cbde492..608c84c5aa8 100644 --- a/sound/soc/codecs/wm8995.c +++ b/sound/soc/codecs/wm8995.c @@ -1223,7 +1223,7 @@ static int wm8995_set_tristate(struct snd_soc_dai *codec_dai, int tristate) else val = 0; - return snd_soc_update_bits(codec, reg, mask, reg); + return snd_soc_update_bits(codec, reg, mask, val); } /* The size in bits of the FLL divide multiplied by 10 -- cgit v1.2.3-18-g5258 From 78b3fb46753872fc79bffecc8d50355a8622b39b Mon Sep 17 00:00:00 2001 From: Qiao Zhou Date: Wed, 19 Jan 2011 19:10:47 +0800 Subject: ASoC: WM8994: fix wrong value in tristate function fix wrong value in wm8994_set_tristate func. when updating reg bits, it should use "value", not "reg". Signed-off-by: Qiao Zhou Acked-by: Liam Girdwood Signed-off-by: Mark Brown Cc: stable@kernel.org --- sound/soc/codecs/wm8994.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 247a6a99feb..3351f77607b 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -2386,7 +2386,7 @@ static int wm8994_set_tristate(struct snd_soc_dai *codec_dai, int tristate) else val = 0; - return snd_soc_update_bits(codec, reg, mask, reg); + return snd_soc_update_bits(codec, reg, mask, val); } #define WM8994_RATES SNDRV_PCM_RATE_8000_96000 -- cgit v1.2.3-18-g5258 From 490da40d82b31c0562d3f5edb37810f492ca1c34 Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Wed, 19 Jan 2011 10:51:44 +0800 Subject: blktrace: Don't output messages if NOTIFY isn't set. Now if we enable blktrace, cfq has too many messages output to the trace buffer. It is fine if we don't specify any action mask. But if I do like this: blktrace /dev/sdb -a issue -a complete -o - | blkparse -i - I only want to see 'D' and 'C', while with the following command dd if=/mnt/ocfs2/test of=/dev/null bs=4k count=1 iflag=direct I will get(with a 2.6.37 vanilla kernel): 8,16 0 0 0.000000000 0 m N cfq3805 alloced 8,16 0 0 0.000004126 0 m N cfq3805 insert_request 8,16 0 0 0.000004884 0 m N cfq3805 add_to_rr 8,16 0 0 0.000008417 0 m N cfq workload slice:300 8,16 0 0 0.000009557 0 m N cfq3805 set_active wl_prio:0 wl_type:2 8,16 0 0 0.000010640 0 m N cfq3805 fifo= (null) 8,16 0 0 0.000011193 0 m N cfq3805 dispatch_insert 8,16 0 0 0.000012221 0 m N cfq3805 dispatched a request 8,16 0 0 0.000012802 0 m N cfq3805 activate rq, drv=1 8,16 0 1 0.000013181 3805 D R 114759 + 8 [dd] 8,16 0 2 0.000164244 0 C R 114759 + 8 [0] 8,16 0 0 0.000167997 0 m N cfq3805 complete rqnoidle 0 8,16 0 0 0.000168782 0 m N cfq3805 set_slice=100 8,16 0 0 0.000169874 0 m N cfq3805 arm_idle: 8 group_idle: 0 8,16 0 0 0.000170189 0 m N cfq schedule dispatch 8,16 0 0 0.000397938 0 m N cfq3805 slice expired t=0 8,16 0 0 0.000399763 0 m N cfq3805 sl_used=1 disp=1 charge=1 iops=0 sect=8 8,16 0 0 0.000400227 0 m N cfq3805 del_from_rr 8,16 0 0 0.000400882 0 m N cfq3805 put_queue See, there are 19 lines while I only need 2. I don't think it is appropriate for a user. So this patch will disable any messages if the BLK_TC_NOTIFY isn't set. Now the output for the same command will look like: 8,16 0 1 0.000000000 4908 D R 114759 + 8 [dd] 8,16 0 2 0.000146827 0 C R 114759 + 8 [0] Yes, it is what I want to see. Cc: Steven Rostedt Cc: Jeff Moyer Signed-off-by: Tao Ma Signed-off-by: Jens Axboe --- kernel/trace/blktrace.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c index 153562d0b93..d95721f3370 100644 --- a/kernel/trace/blktrace.c +++ b/kernel/trace/blktrace.c @@ -138,6 +138,13 @@ void __trace_note_message(struct blk_trace *bt, const char *fmt, ...) !blk_tracer_enabled)) return; + /* + * If the BLK_TC_NOTIFY action mask isn't set, don't send any note + * message to the trace. + */ + if (!(bt->act_mask & BLK_TC_NOTIFY)) + return; + local_irq_save(flags); buf = per_cpu_ptr(bt->msg_data, smp_processor_id()); va_start(args, fmt); -- cgit v1.2.3-18-g5258 From 04de96c9c6981c5957aa5db39bbdc4d958d07efa Mon Sep 17 00:00:00 2001 From: Tracey Dent Date: Wed, 19 Jan 2011 08:25:02 -0700 Subject: drivers/block/Makefile: replace the use of -objs with -y Change Makefile to use -y instead of -objs because -objs is deprecated and should now be switched. According to (documentation/kbuild/makefiles.txt). Signed-off-by: Tracey Dent Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- drivers/block/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/Makefile b/drivers/block/Makefile index d7f463d6312..40528ba56d1 100644 --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -39,4 +39,4 @@ obj-$(CONFIG_XEN_BLKDEV_FRONTEND) += xen-blkfront.o obj-$(CONFIG_BLK_DEV_DRBD) += drbd/ obj-$(CONFIG_BLK_DEV_RBD) += rbd.o -swim_mod-objs := swim.o swim_asm.o +swim_mod-y := swim.o swim_asm.o -- cgit v1.2.3-18-g5258 From ee71a968672a9951aee6014c55511007596425bc Mon Sep 17 00:00:00 2001 From: Sergey Senozhatsky Date: Wed, 19 Jan 2011 08:25:02 -0700 Subject: loop: queue_lock NULL pointer derefence in blk_throtl_exit Performing $ sudo mount -o loop -o umask=0 /dev/sdb1 /mnt/ mount: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so $ sudo modprobe -r loop results in oops: BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: [] do_raw_spin_lock+0x14/0x122 Process modprobe (pid: 6189, threadinfo ffff88009a898000, task ffff880154a88000) Call Trace: [] _raw_spin_lock_irq+0x4a/0x51 [] ? blk_throtl_exit+0x3b/0xa0 [] ? cancel_delayed_work_sync+0xd/0xf [] blk_throtl_exit+0x3b/0xa0 [] blk_release_queue+0x21/0x65 [] kobject_release+0x51/0x66 [] ? kobject_release+0x0/0x66 [] kref_put+0x43/0x4d [] kobject_put+0x47/0x4b [] blk_cleanup_queue+0x56/0x5b [] loop_exit+0x68/0x844 [loop] [] sys_delete_module+0x1e8/0x25b [] ? trace_hardirqs_on_thunk+0x3a/0x3f [] system_call_fastpath+0x16/0x1b because of an attempt to acquire NULL queue_lock. I added the same lines as in blk_queue_make_request - index 44e18c0..49e6a54 100644`fall back to embedded per-queue lock'. Signed-off-by: Sergey Senozhatsky Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- drivers/block/loop.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/block/loop.c b/drivers/block/loop.c index 44e18c073c4..49e6a545eb6 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -1641,6 +1641,9 @@ out: static void loop_free(struct loop_device *lo) { + if (!lo->lo_queue->queue_lock) + lo->lo_queue->queue_lock = &lo->lo_queue->__queue_lock; + blk_cleanup_queue(lo->lo_queue); put_disk(lo->lo_disk); list_del(&lo->lo_list); -- cgit v1.2.3-18-g5258 From a0700bdd0b0150ea445159b1dee587f1507c272f Mon Sep 17 00:00:00 2001 From: Tracey Dent Date: Wed, 19 Jan 2011 08:25:02 -0700 Subject: drivers/block/aoe/Makefile: replace the use of -objs with -y Change Makefile to use -y instead of -objs because -objs is deprecated and should now be switched. According to (documentation/kbuild/makefiles.txt). Signed-off-by: Tracey Dent Cc: "Ed L. Cashin" Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- drivers/block/aoe/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/aoe/Makefile b/drivers/block/aoe/Makefile index e76d997183c..06ea82cdf27 100644 --- a/drivers/block/aoe/Makefile +++ b/drivers/block/aoe/Makefile @@ -3,4 +3,4 @@ # obj-$(CONFIG_ATA_OVER_ETH) += aoe.o -aoe-objs := aoeblk.o aoechr.o aoecmd.o aoedev.o aoemain.o aoenet.o +aoe-y := aoeblk.o aoechr.o aoecmd.o aoedev.o aoemain.o aoenet.o -- cgit v1.2.3-18-g5258 From 68264e9d6781f7163e92c517769bb470fa43f6cd Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Wed, 19 Jan 2011 08:25:02 -0700 Subject: cciss: make cciss_revalidate not loop through CISS_MAX_LUNS volumes unnecessarily. Signed-off-by: Stephen M. Cameron Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- drivers/block/cciss.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 516d5bbec2b..9279272b373 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -2833,7 +2833,7 @@ static int cciss_revalidate(struct gendisk *disk) sector_t total_size; InquiryData_struct *inq_buff = NULL; - for (logvol = 0; logvol < CISS_MAX_LUN; logvol++) { + for (logvol = 0; logvol <= h->highest_lun; logvol++) { if (!h->drv[logvol]) continue; if (memcmp(h->drv[logvol]->LunID, drv->LunID, -- cgit v1.2.3-18-g5258 From ba5bd520f679c450fb6efa439618703bd0956daa Mon Sep 17 00:00:00 2001 From: Vivek Goyal Date: Wed, 19 Jan 2011 08:25:02 -0700 Subject: cfq: rename a function to give it more appropriate name o Rename a function to give it more approprate name. We are calculating cfq queue slice and function name gives the impression as if cfq group slice length is being calculated. Signed-off-by: Vivek Goyal Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 501ffdf0399..ace16865713 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -599,7 +599,7 @@ cfq_group_slice(struct cfq_data *cfqd, struct cfq_group *cfqg) } static inline unsigned -cfq_scaled_group_slice(struct cfq_data *cfqd, struct cfq_queue *cfqq) +cfq_scaled_cfqq_slice(struct cfq_data *cfqd, struct cfq_queue *cfqq) { unsigned slice = cfq_prio_to_slice(cfqd, cfqq); if (cfqd->cfq_latency) { @@ -631,7 +631,7 @@ cfq_scaled_group_slice(struct cfq_data *cfqd, struct cfq_queue *cfqq) static inline void cfq_set_prio_slice(struct cfq_data *cfqd, struct cfq_queue *cfqq) { - unsigned slice = cfq_scaled_group_slice(cfqd, cfqq); + unsigned slice = cfq_scaled_cfqq_slice(cfqd, cfqq); cfqq->slice_start = jiffies; cfqq->slice_end = jiffies + slice; @@ -1671,7 +1671,7 @@ __cfq_slice_expired(struct cfq_data *cfqd, struct cfq_queue *cfqq, */ if (timed_out) { if (cfq_cfqq_slice_new(cfqq)) - cfqq->slice_resid = cfq_scaled_group_slice(cfqd, cfqq); + cfqq->slice_resid = cfq_scaled_cfqq_slice(cfqd, cfqq); else cfqq->slice_resid = cfqq->slice_end - jiffies; cfq_log_cfqq(cfqd, cfqq, "resid=%ld", cfqq->slice_resid); -- cgit v1.2.3-18-g5258 From be2c6b1990904dbd43f3d9b90fa2c530504375cd Mon Sep 17 00:00:00 2001 From: Vivek Goyal Date: Wed, 19 Jan 2011 08:25:02 -0700 Subject: blkio-throttle: Avoid calling blkiocg_lookup_group() for root group o Jeff Moyer was doing some testing on a RAM backed disk and blkiocg_lookup_group() showed up high overhead after memcpy(). Similarly somebody else reported that blkiocg_lookup_group() is eating 6% extra cpu. Though looking at the code I can't think why the overhead of this function is so high. One thing is that it is called with very high frequency (once for every IO). o For lot of folks blkio controller will be compiled in but they might not have actually created cgroups. Hence optimize the case of root cgroup where we can avoid calling blkiocg_lookup_group() if IO is happening in root group (common case). Reported-by: Jeff Moyer Signed-off-by: Vivek Goyal Acked-by: Jeff Moyer Signed-off-by: Jens Axboe --- block/blk-throttle.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/block/blk-throttle.c b/block/blk-throttle.c index 381b09bb562..a89043a3caa 100644 --- a/block/blk-throttle.c +++ b/block/blk-throttle.c @@ -168,7 +168,15 @@ static struct throtl_grp * throtl_find_alloc_tg(struct throtl_data *td, * tree of blkg (instead of traversing through hash list all * the time. */ - tg = tg_of_blkg(blkiocg_lookup_group(blkcg, key)); + + /* + * This is the common case when there are no blkio cgroups. + * Avoid lookup in this case + */ + if (blkcg == &blkio_root_cgroup) + tg = &td->root_tg; + else + tg = tg_of_blkg(blkiocg_lookup_group(blkcg, key)); /* Fill in device details for root group */ if (tg && !tg->blkg.dev && bdi->dev && dev_name(bdi->dev)) { -- cgit v1.2.3-18-g5258 From 86e09287e4f8c81831b4d4118a48597565f0d21b Mon Sep 17 00:00:00 2001 From: Alexander Holler Date: Mon, 22 Nov 2010 21:09:01 +0100 Subject: Bluetooth: ath3k: reduce memory usage There is no need to hold the firmware in memory. Signed-off-by: Alexander Holler Signed-off-by: Gustavo F. Padovan --- drivers/bluetooth/ath3k.c | 75 +++++++++++++---------------------------------- 1 file changed, 20 insertions(+), 55 deletions(-) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index 949ed09c636..a126e614601 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -47,46 +47,40 @@ MODULE_DEVICE_TABLE(usb, ath3k_table); #define USB_REQ_DFU_DNLOAD 1 #define BULK_SIZE 4096 -struct ath3k_data { - struct usb_device *udev; - u8 *fw_data; - u32 fw_size; - u32 fw_sent; -}; - -static int ath3k_load_firmware(struct ath3k_data *data, - unsigned char *firmware, - int count) +static int ath3k_load_firmware(struct usb_device *udev, + const struct firmware *firmware) { u8 *send_buf; int err, pipe, len, size, sent = 0; + int count = firmware->size; - BT_DBG("ath3k %p udev %p", data, data->udev); + BT_DBG("udev %p", udev); - pipe = usb_sndctrlpipe(data->udev, 0); + pipe = usb_sndctrlpipe(udev, 0); - if ((usb_control_msg(data->udev, pipe, + send_buf = kmalloc(BULK_SIZE, GFP_ATOMIC); + if (!send_buf) { + BT_ERR("Can't allocate memory chunk for firmware"); + return -ENOMEM; + } + + memcpy(send_buf, firmware->data, 20); + if ((err = usb_control_msg(udev, pipe, USB_REQ_DFU_DNLOAD, USB_TYPE_VENDOR, 0, 0, - firmware, 20, USB_CTRL_SET_TIMEOUT)) < 0) { + send_buf, 20, USB_CTRL_SET_TIMEOUT)) < 0) { BT_ERR("Can't change to loading configuration err"); - return -EBUSY; + goto error; } sent += 20; count -= 20; - send_buf = kmalloc(BULK_SIZE, GFP_ATOMIC); - if (!send_buf) { - BT_ERR("Can't allocate memory chunk for firmware"); - return -ENOMEM; - } - while (count) { size = min_t(uint, count, BULK_SIZE); - pipe = usb_sndbulkpipe(data->udev, 0x02); - memcpy(send_buf, firmware + sent, size); + pipe = usb_sndbulkpipe(udev, 0x02); + memcpy(send_buf, firmware->data + sent, size); - err = usb_bulk_msg(data->udev, pipe, send_buf, size, + err = usb_bulk_msg(udev, pipe, send_buf, size, &len, 3000); if (err || (len != size)) { @@ -112,57 +106,28 @@ static int ath3k_probe(struct usb_interface *intf, { const struct firmware *firmware; struct usb_device *udev = interface_to_usbdev(intf); - struct ath3k_data *data; - int size; BT_DBG("intf %p id %p", intf, id); if (intf->cur_altsetting->desc.bInterfaceNumber != 0) return -ENODEV; - data = kzalloc(sizeof(*data), GFP_KERNEL); - if (!data) - return -ENOMEM; - - data->udev = udev; - if (request_firmware(&firmware, "ath3k-1.fw", &udev->dev) < 0) { - kfree(data); return -EIO; } - size = max_t(uint, firmware->size, 4096); - data->fw_data = kmalloc(size, GFP_KERNEL); - if (!data->fw_data) { + if (ath3k_load_firmware(udev, firmware)) { release_firmware(firmware); - kfree(data); - return -ENOMEM; - } - - memcpy(data->fw_data, firmware->data, firmware->size); - data->fw_size = firmware->size; - data->fw_sent = 0; - release_firmware(firmware); - - usb_set_intfdata(intf, data); - if (ath3k_load_firmware(data, data->fw_data, data->fw_size)) { - usb_set_intfdata(intf, NULL); - kfree(data->fw_data); - kfree(data); return -EIO; } + release_firmware(firmware); return 0; } static void ath3k_disconnect(struct usb_interface *intf) { - struct ath3k_data *data = usb_get_intfdata(intf); - BT_DBG("ath3k_disconnect intf %p", intf); - - kfree(data->fw_data); - kfree(data); } static struct usb_driver ath3k_driver = { -- cgit v1.2.3-18-g5258 From 4571928fc73589e9c5217cd069d2c0b4ff1818a8 Mon Sep 17 00:00:00 2001 From: David Sterba Date: Fri, 14 Jan 2011 14:59:44 +0100 Subject: Bluetooth: l2cap: fix misuse of logical operation in place of bitop MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit CC: Marcel Holtmann CC: "Gustavo F. Padovan" CC: João Paulo Rechi Vita Signed-off-by: David Sterba Signed-off-by: Gustavo F. Padovan --- net/bluetooth/l2cap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index c791fcda7b2..4fd88eb0a46 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -1893,8 +1893,8 @@ static int l2cap_sock_sendmsg(struct kiocb *iocb, struct socket *sock, struct ms if (pi->mode == L2CAP_MODE_STREAMING) { l2cap_streaming_send(sk); } else { - if (pi->conn_state & L2CAP_CONN_REMOTE_BUSY && - pi->conn_state && L2CAP_CONN_WAIT_F) { + if ((pi->conn_state & L2CAP_CONN_REMOTE_BUSY) && + (pi->conn_state & L2CAP_CONN_WAIT_F)) { err = len; break; } -- cgit v1.2.3-18-g5258 From e2e0cacbd4b0c7c69c7591d37c243f2363aeaa71 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Tue, 4 Jan 2011 12:08:50 +0200 Subject: Bluetooth: Fix leaking blacklist when unregistering a hci device The blacklist should be freed before the hci device gets unregistered. Signed-off-by: Johan Hedberg Signed-off-by: Gustavo F. Padovan --- net/bluetooth/hci_core.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 8b602d881fd..9c4541bc488 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -1011,6 +1011,10 @@ int hci_unregister_dev(struct hci_dev *hdev) destroy_workqueue(hdev->workqueue); + hci_dev_lock_bh(hdev); + hci_blacklist_clear(hdev); + hci_dev_unlock_bh(hdev); + __hci_dev_put(hdev); return 0; -- cgit v1.2.3-18-g5258 From 683d949a7fbf33c244670e34d35c460e0d6558cb Mon Sep 17 00:00:00 2001 From: Lukáš Turek <8an@praha12.net> Date: Wed, 5 Jan 2011 02:43:59 +0100 Subject: Bluetooth: Never deallocate a session when some DLC points to it Fix a bug introduced in commit 9cf5b0ea3a7f1432c61029f7aaf4b8b338628884: function rfcomm_recv_ua calls rfcomm_session_put without checking that the session is not referenced by some DLC. If the session is freed, that DLC would refer to deallocated memory, causing an oops later, as shown in this bug report: https://bugzilla.kernel.org/show_bug.cgi?id=15994 Signed-off-by: Lukas Turek <8an@praha12.net> Signed-off-by: Gustavo F. Padovan --- net/bluetooth/rfcomm/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c index ff8aaa73665..6b83776534f 100644 --- a/net/bluetooth/rfcomm/core.c +++ b/net/bluetooth/rfcomm/core.c @@ -1164,7 +1164,8 @@ static int rfcomm_recv_ua(struct rfcomm_session *s, u8 dlci) * initiator rfcomm_process_rx already calls * rfcomm_session_put() */ if (s->sock->sk->sk_state != BT_CLOSED) - rfcomm_session_put(s); + if (list_empty(&s->dlcs)) + rfcomm_session_put(s); break; } } -- cgit v1.2.3-18-g5258 From 88644bb9fee591b2743a881923263bc28df4cded Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Wed, 19 Jan 2011 12:06:48 +0530 Subject: Revert "Bluetooth: Update sec_level/auth_type for already existing connections" This reverts commit 045309820afe047920a50de25634dab46a1e851d. That commit is wrong for two reasons: - The conn->sec_level shouldn't be updated without performing authentication first (as it's supposed to represent the level of security that the existing connection has) - A higher auth_type value doesn't mean "more secure" like the commit seems to assume. E.g. dedicated bonding with MITM protection is 0x03 whereas general bonding without MITM protection is 0x04. hci_conn_auth already takes care of updating conn->auth_type so hci_connect doesn't need to do it. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo F. Padovan --- net/bluetooth/hci_conn.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index 6b90a419173..65a3fb5678e 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -382,11 +382,6 @@ struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 acl->sec_level = sec_level; acl->auth_type = auth_type; hci_acl_connect(acl); - } else { - if (acl->sec_level < sec_level) - acl->sec_level = sec_level; - if (acl->auth_type < auth_type) - acl->auth_type = auth_type; } if (type == ACL_LINK) -- cgit v1.2.3-18-g5258 From 65cf686ee102b7eb0477a4bab82ff227071a0258 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Wed, 19 Jan 2011 12:06:49 +0530 Subject: Bluetooth: Fix MITM protection requirement preservation If an existing connection has a MITM protection requirement (the first bit of the auth_type) then that requirement should not be cleared by new sockets that reuse the ACL but don't have that requirement. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo F. Padovan --- net/bluetooth/hci_conn.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index 65a3fb5678e..fe712a89a85 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -442,6 +442,9 @@ static int hci_conn_auth(struct hci_conn *conn, __u8 sec_level, __u8 auth_type) else if (conn->link_mode & HCI_LM_AUTH) return 1; + /* Make sure we preserve an existing MITM requirement*/ + auth_type |= (conn->auth_type & 0x01); + conn->auth_type = auth_type; if (!test_and_set_bit(HCI_CONN_AUTH_PEND, &conn->pend)) { -- cgit v1.2.3-18-g5258 From 8556edd32f01c50a3c99e44dc2c3b1252ea59605 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Wed, 19 Jan 2011 12:06:50 +0530 Subject: Bluetooth: Create a unified auth_type evaluation function The logic for determining the needed auth_type for an L2CAP socket is rather complicated and has so far been duplicated in l2cap_check_security as well as l2cap_do_connect. Additionally the l2cap_check_security code was completely missing the handling of SOCK_RAW type sockets. This patch creates a unified function for the evaluation and makes l2cap_do_connect and l2cap_check_security use that function. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo F. Padovan --- net/bluetooth/l2cap.c | 77 +++++++++++++++++++-------------------------------- 1 file changed, 28 insertions(+), 49 deletions(-) diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index 4fd88eb0a46..ae227bf2556 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -305,33 +305,44 @@ static void l2cap_chan_del(struct sock *sk, int err) } } -/* Service level security */ -static inline int l2cap_check_security(struct sock *sk) +static inline u8 l2cap_get_auth_type(struct sock *sk) { - struct l2cap_conn *conn = l2cap_pi(sk)->conn; - __u8 auth_type; + if (sk->sk_type == SOCK_RAW) { + switch (l2cap_pi(sk)->sec_level) { + case BT_SECURITY_HIGH: + return HCI_AT_DEDICATED_BONDING_MITM; + case BT_SECURITY_MEDIUM: + return HCI_AT_DEDICATED_BONDING; + default: + return HCI_AT_NO_BONDING; + } + } else if (l2cap_pi(sk)->psm == cpu_to_le16(0x0001)) { + if (l2cap_pi(sk)->sec_level == BT_SECURITY_LOW) + l2cap_pi(sk)->sec_level = BT_SECURITY_SDP; - if (l2cap_pi(sk)->psm == cpu_to_le16(0x0001)) { if (l2cap_pi(sk)->sec_level == BT_SECURITY_HIGH) - auth_type = HCI_AT_NO_BONDING_MITM; + return HCI_AT_NO_BONDING_MITM; else - auth_type = HCI_AT_NO_BONDING; - - if (l2cap_pi(sk)->sec_level == BT_SECURITY_LOW) - l2cap_pi(sk)->sec_level = BT_SECURITY_SDP; + return HCI_AT_NO_BONDING; } else { switch (l2cap_pi(sk)->sec_level) { case BT_SECURITY_HIGH: - auth_type = HCI_AT_GENERAL_BONDING_MITM; - break; + return HCI_AT_GENERAL_BONDING_MITM; case BT_SECURITY_MEDIUM: - auth_type = HCI_AT_GENERAL_BONDING; - break; + return HCI_AT_GENERAL_BONDING; default: - auth_type = HCI_AT_NO_BONDING; - break; + return HCI_AT_NO_BONDING; } } +} + +/* Service level security */ +static inline int l2cap_check_security(struct sock *sk) +{ + struct l2cap_conn *conn = l2cap_pi(sk)->conn; + __u8 auth_type; + + auth_type = l2cap_get_auth_type(sk); return hci_conn_security(conn->hcon, l2cap_pi(sk)->sec_level, auth_type); @@ -1068,39 +1079,7 @@ static int l2cap_do_connect(struct sock *sk) err = -ENOMEM; - if (sk->sk_type == SOCK_RAW) { - switch (l2cap_pi(sk)->sec_level) { - case BT_SECURITY_HIGH: - auth_type = HCI_AT_DEDICATED_BONDING_MITM; - break; - case BT_SECURITY_MEDIUM: - auth_type = HCI_AT_DEDICATED_BONDING; - break; - default: - auth_type = HCI_AT_NO_BONDING; - break; - } - } else if (l2cap_pi(sk)->psm == cpu_to_le16(0x0001)) { - if (l2cap_pi(sk)->sec_level == BT_SECURITY_HIGH) - auth_type = HCI_AT_NO_BONDING_MITM; - else - auth_type = HCI_AT_NO_BONDING; - - if (l2cap_pi(sk)->sec_level == BT_SECURITY_LOW) - l2cap_pi(sk)->sec_level = BT_SECURITY_SDP; - } else { - switch (l2cap_pi(sk)->sec_level) { - case BT_SECURITY_HIGH: - auth_type = HCI_AT_GENERAL_BONDING_MITM; - break; - case BT_SECURITY_MEDIUM: - auth_type = HCI_AT_GENERAL_BONDING; - break; - default: - auth_type = HCI_AT_NO_BONDING; - break; - } - } + auth_type = l2cap_get_auth_type(sk); hcon = hci_connect(hdev, ACL_LINK, dst, l2cap_pi(sk)->sec_level, auth_type); -- cgit v1.2.3-18-g5258 From d00ef24fc2923b65fdd440dc6445903e965841ac Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Wed, 19 Jan 2011 12:06:51 +0530 Subject: Bluetooth: Fix authentication request for L2CAP raw sockets When there is an existing connection l2cap_check_security needs to be called to ensure that the security level of the new socket is fulfilled. Normally l2cap_do_start takes care of this, but that function doesn't get called for SOCK_RAW type sockets. This patch adds the necessary l2cap_check_security call to the appropriate branch in l2cap_do_connect. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo F. Padovan --- net/bluetooth/l2cap.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index ae227bf2556..7550abb0c96 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -1106,7 +1106,8 @@ static int l2cap_do_connect(struct sock *sk) if (sk->sk_type != SOCK_SEQPACKET && sk->sk_type != SOCK_STREAM) { l2cap_sock_clear_timer(sk); - sk->sk_state = BT_CONNECTED; + if (l2cap_check_security(sk)) + sk->sk_state = BT_CONNECTED; } else l2cap_do_start(sk); } -- cgit v1.2.3-18-g5258 From 765c2a964b49bd06b61a52991519281c85d82b67 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Wed, 19 Jan 2011 12:06:52 +0530 Subject: Bluetooth: Fix race condition with conn->sec_level The conn->sec_level value is supposed to represent the current level of security that the connection has. However, by assigning to it before requesting authentication it will have the wrong value during the authentication procedure. To fix this a pending_sec_level variable is added which is used to track the desired security level while making sure that sec_level always represents the current level of security. Signed-off-by: Johan Hedberg Signed-off-by: Gustavo F. Padovan --- include/net/bluetooth/hci_core.h | 1 + net/bluetooth/hci_conn.c | 8 ++++++-- net/bluetooth/hci_event.c | 9 +++++---- 3 files changed, 12 insertions(+), 6 deletions(-) diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index a29feb01854..d2cf8840769 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -184,6 +184,7 @@ struct hci_conn { __u32 link_mode; __u8 auth_type; __u8 sec_level; + __u8 pending_sec_level; __u8 power_save; __u16 disc_timeout; unsigned long pend; diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index fe712a89a85..99cd8d9d891 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -379,7 +379,8 @@ struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 hci_conn_hold(acl); if (acl->state == BT_OPEN || acl->state == BT_CLOSED) { - acl->sec_level = sec_level; + acl->sec_level = BT_SECURITY_LOW; + acl->pending_sec_level = sec_level; acl->auth_type = auth_type; hci_acl_connect(acl); } @@ -437,8 +438,11 @@ static int hci_conn_auth(struct hci_conn *conn, __u8 sec_level, __u8 auth_type) { BT_DBG("conn %p", conn); + if (conn->pending_sec_level > sec_level) + sec_level = conn->pending_sec_level; + if (sec_level > conn->sec_level) - conn->sec_level = sec_level; + conn->pending_sec_level = sec_level; else if (conn->link_mode & HCI_LM_AUTH) return 1; diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 38100170d38..a290854fdaa 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -692,13 +692,13 @@ static int hci_outgoing_auth_needed(struct hci_dev *hdev, if (conn->state != BT_CONFIG || !conn->out) return 0; - if (conn->sec_level == BT_SECURITY_SDP) + if (conn->pending_sec_level == BT_SECURITY_SDP) return 0; /* Only request authentication for SSP connections or non-SSP * devices with sec_level HIGH */ if (!(hdev->ssp_mode > 0 && conn->ssp_mode > 0) && - conn->sec_level != BT_SECURITY_HIGH) + conn->pending_sec_level != BT_SECURITY_HIGH) return 0; return 1; @@ -1095,9 +1095,10 @@ static inline void hci_auth_complete_evt(struct hci_dev *hdev, struct sk_buff *s conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle)); if (conn) { - if (!ev->status) + if (!ev->status) { conn->link_mode |= HCI_LM_AUTH; - else + conn->sec_level = conn->pending_sec_level; + } else conn->sec_level = BT_SECURITY_LOW; clear_bit(HCI_CONN_AUTH_PEND, &conn->pend); -- cgit v1.2.3-18-g5258 From 50aac4fec503960380ab594a93a6fbfdf3f8915f Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Tue, 18 Jan 2011 07:59:40 -0800 Subject: ceph: fix cap_wanted_delay_{min,max} mount option initialization These were initialized to 0 instead of the default, fallout from the RBD refactor in 3d14c5d2b6e15c21d8e5467dc62d33127c23a644. Signed-off-by: Sage Weil --- fs/ceph/super.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/ceph/super.c b/fs/ceph/super.c index bf6f0f34082..9c5085465a6 100644 --- a/fs/ceph/super.c +++ b/fs/ceph/super.c @@ -290,6 +290,8 @@ static int parse_mount_options(struct ceph_mount_options **pfsopt, fsopt->rsize = CEPH_MOUNT_RSIZE_DEFAULT; fsopt->snapdir_name = kstrdup(CEPH_SNAPDIRNAME_DEFAULT, GFP_KERNEL); + fsopt->caps_wanted_delay_min = CEPH_CAPS_WANTED_DELAY_MIN_DEFAULT; + fsopt->caps_wanted_delay_max = CEPH_CAPS_WANTED_DELAY_MAX_DEFAULT; fsopt->cap_release_safety = CEPH_CAP_RELEASE_SAFETY_DEFAULT; fsopt->max_readdir = CEPH_MAX_READDIR_DEFAULT; fsopt->max_readdir_bytes = CEPH_MAX_READDIR_BYTES_DEFAULT; -- cgit v1.2.3-18-g5258 From 24be0c481067560b11441e794e27f166a3568863 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Tue, 18 Jan 2011 08:48:06 -0800 Subject: ceph: fix erroneous cap flush to non-auth mds The int flushing is global and not clear on each iteration of the loop, which can cause a second flush of caps to any MDSs with ids greater than the auth. Signed-off-by: Sage Weil --- fs/ceph/caps.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c index 60d27bc9eb8..f654c7e933a 100644 --- a/fs/ceph/caps.c +++ b/fs/ceph/caps.c @@ -1658,6 +1658,8 @@ ack: if (cap == ci->i_auth_cap && ci->i_dirty_caps) flushing = __mark_caps_flushing(inode, session); + else + flushing = 0; mds = cap->mds; /* remember mds, so we don't repeat */ sent++; -- cgit v1.2.3-18-g5258 From 088b3f5e9ee2649f5cfc2f08d8ce654e3eeba310 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Tue, 18 Jan 2011 08:56:01 -0800 Subject: ceph: fix flushing of caps vs cap import If we are mid-flush and a cap is migrated to another node, we need to resend the cap flush message to the new MDS, and do so with the original flush_seq to avoid leaking across a sync boundary. Previously we didn't redo the flush (we only flushed newly dirty data), which would cause a later sync to hang forever. Signed-off-by: Sage Weil --- fs/ceph/caps.c | 38 ++++++++++++++++++++++++++++++++++---- 1 file changed, 34 insertions(+), 4 deletions(-) diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c index f654c7e933a..7def3f5903d 100644 --- a/fs/ceph/caps.c +++ b/fs/ceph/caps.c @@ -1560,9 +1560,10 @@ retry_locked: /* NOTE: no side-effects allowed, until we take s_mutex */ revoking = cap->implemented & ~cap->issued; - if (revoking) - dout(" mds%d revoking %s\n", cap->mds, - ceph_cap_string(revoking)); + dout(" mds%d cap %p issued %s implemented %s revoking %s\n", + cap->mds, cap, ceph_cap_string(cap->issued), + ceph_cap_string(cap->implemented), + ceph_cap_string(revoking)); if (cap == ci->i_auth_cap && (cap->issued & CEPH_CAP_FILE_WR)) { @@ -1942,6 +1943,35 @@ void ceph_kick_flushing_caps(struct ceph_mds_client *mdsc, } } +static void kick_flushing_inode_caps(struct ceph_mds_client *mdsc, + struct ceph_mds_session *session, + struct inode *inode) +{ + struct ceph_inode_info *ci = ceph_inode(inode); + struct ceph_cap *cap; + int delayed = 0; + + spin_lock(&inode->i_lock); + cap = ci->i_auth_cap; + dout("kick_flushing_inode_caps %p flushing %s flush_seq %lld\n", inode, + ceph_cap_string(ci->i_flushing_caps), ci->i_cap_flush_seq); + __ceph_flush_snaps(ci, &session, 1); + if (ci->i_flushing_caps) { + delayed = __send_cap(mdsc, cap, CEPH_CAP_OP_FLUSH, + __ceph_caps_used(ci), + __ceph_caps_wanted(ci), + cap->issued | cap->implemented, + ci->i_flushing_caps, NULL); + if (delayed) { + spin_lock(&inode->i_lock); + __cap_delay_requeue(mdsc, ci); + spin_unlock(&inode->i_lock); + } + } else { + spin_unlock(&inode->i_lock); + } +} + /* * Take references to capabilities we hold, so that we don't release @@ -2689,7 +2719,7 @@ static void handle_cap_import(struct ceph_mds_client *mdsc, ceph_add_cap(inode, session, cap_id, -1, issued, wanted, seq, mseq, realmino, CEPH_CAP_FLAG_AUTH, NULL /* no caps context */); - try_flush_caps(inode, session, NULL); + kick_flushing_inode_caps(mdsc, session, inode); up_read(&mdsc->snap_rwsem); /* make sure we re-request max_size, if necessary */ -- cgit v1.2.3-18-g5258 From 7e57b81c7688c762bc9e775bc83f9fc17946f527 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Tue, 18 Jan 2011 09:00:01 -0800 Subject: ceph: avoid immediate cap check after import The NODELAY flag avoids the heuristics that delay cap (issued/wanted) release. There's no reason for that after we import a cap, and it kills whatever benefit we get from those delays. Signed-off-by: Sage Weil --- fs/ceph/caps.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c index 7def3f5903d..6b61ded701e 100644 --- a/fs/ceph/caps.c +++ b/fs/ceph/caps.c @@ -2817,8 +2817,7 @@ void ceph_handle_caps(struct ceph_mds_session *session, case CEPH_CAP_OP_IMPORT: handle_cap_import(mdsc, inode, h, session, snaptrace, snaptrace_len); - ceph_check_caps(ceph_inode(inode), CHECK_CAPS_NODELAY, - session); + ceph_check_caps(ceph_inode(inode), 0, session); goto done_unlocked; } -- cgit v1.2.3-18-g5258 From 0da2a4ac33c291728d8be5bdb865467dcb078d13 Mon Sep 17 00:00:00 2001 From: Fred Isaman Date: Wed, 19 Jan 2011 14:18:50 -0500 Subject: NFS: fix handling of malloc failure during nfs_flush_multi() Cleanup of the allocated list entries should not call put_nfs_open_context() on each entry, as the context will always be NULL, causing an oops. Signed-off-by: Fred Isaman Signed-off-by: Trond Myklebust --- fs/nfs/write.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/write.c b/fs/nfs/write.c index 10d648ea128..c8278f4046c 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -932,7 +932,7 @@ out_bad: while (!list_empty(&list)) { data = list_entry(list.next, struct nfs_write_data, pages); list_del(&data->pages); - nfs_writedata_release(data); + nfs_writedata_free(data); } nfs_redirty_request(req); return -ENOMEM; -- cgit v1.2.3-18-g5258 From fec2be706dfb1f2f70ffd04319841ec0dfc546b2 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 20 Jan 2011 09:13:14 -0800 Subject: Staging: remove unintended Module.symvers file MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit a82ad05ecd9dbd909509a332d3aa5f4ac439a054 (staging: vme: tsi148: fix warning in free_irq) accidentally added a Module.symvers file to the git tree. This patch removes it, sorry about that. Reported-by: Toralf Förster Cc: Emilio G. Cota Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vme/bridges/Module.symvers | 0 1 file changed, 0 insertions(+), 0 deletions(-) delete mode 100644 drivers/staging/vme/bridges/Module.symvers diff --git a/drivers/staging/vme/bridges/Module.symvers b/drivers/staging/vme/bridges/Module.symvers deleted file mode 100644 index e69de29bb2d..00000000000 -- cgit v1.2.3-18-g5258 From 268eff909afaca93188d2d14554cbf824f6a0e41 Mon Sep 17 00:00:00 2001 From: Ky Srinivasan Date: Thu, 16 Dec 2010 18:59:19 -0700 Subject: Staging: hv: fix sysfs symlink on hv block device The block device does not create the proper symlink in sysfs because we forgot to set up the gendisk structure properly. This patch fixes the issue. Signed-off-by: K. Y. Srinivasan Cc: Hank Janssen Cc: Haiyang Zhang Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/hv/blkvsc_drv.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/hv/blkvsc_drv.c b/drivers/staging/hv/blkvsc_drv.c index b3d05fcfe6d..4fb809485d9 100644 --- a/drivers/staging/hv/blkvsc_drv.c +++ b/drivers/staging/hv/blkvsc_drv.c @@ -368,6 +368,7 @@ static int blkvsc_probe(struct device *device) blkdev->gd->first_minor = 0; blkdev->gd->fops = &block_ops; blkdev->gd->private_data = blkdev; + blkdev->gd->driverfs_dev = &(blkdev->device_ctx->device); sprintf(blkdev->gd->disk_name, "hd%c", 'a' + devnum); blkvsc_do_inquiry(blkdev); -- cgit v1.2.3-18-g5258 From d70c673153d42e8aefd5ac296c8159ef222d076b Mon Sep 17 00:00:00 2001 From: Timo Teräs Date: Fri, 17 Dec 2010 11:40:24 +0200 Subject: staging: hv: fix netvsc sleeping while atomic MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The channel callbacks are called directly from vmbus_event_dpc which runs in tasklet context. These callbacks need to use GFP_ATOMIC. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16701 Cc: Hank Janssen Cc: Haiyang Zhang Signed-off-by: Timo Teräs Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/hv/netvsc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/hv/netvsc.c b/drivers/staging/hv/netvsc.c index df9cd131e95..0edbe7483a4 100644 --- a/drivers/staging/hv/netvsc.c +++ b/drivers/staging/hv/netvsc.c @@ -1279,7 +1279,7 @@ static void netvsc_channel_cb(void *context) /* ASSERT(device); */ packet = kzalloc(NETVSC_PACKET_SIZE * sizeof(unsigned char), - GFP_KERNEL); + GFP_ATOMIC); if (!packet) return; buffer = packet; -- cgit v1.2.3-18-g5258 From a786f915274ba446865a996515c7790a930f04dd Mon Sep 17 00:00:00 2001 From: Hank Janssen Date: Fri, 7 Jan 2011 09:25:39 -0800 Subject: staging: hv: Removed unneeded call to netif_stop_queue() in hv_netvsc Removed the call to netif_stop_queue() in netvsc_probe() as the queue is not initialized at that point and further call to it after queue initialization is really not necessary. This change was prompted after an upstream change went into 2.6.37 (netif_tx_stop_queue) that now checks if netif_stop_queue is called before register with netdev is done. This will eliminate the warning message to the log when hv_netvsc driver starts up. Signed-off-by: Abhishek Kane Signed-off-by: Haiyang Zhang Signed-off-by: Hank Janssen Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/hv/netvsc_drv.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/staging/hv/netvsc_drv.c b/drivers/staging/hv/netvsc_drv.c index 0147b407512..54706a16dc0 100644 --- a/drivers/staging/hv/netvsc_drv.c +++ b/drivers/staging/hv/netvsc_drv.c @@ -358,7 +358,6 @@ static int netvsc_probe(struct device *device) /* Set initial state */ netif_carrier_off(net); - netif_stop_queue(net); net_device_ctx = netdev_priv(net); net_device_ctx->device_ctx = device_ctx; -- cgit v1.2.3-18-g5258 From 64911e4b133ff633563d6dd2b021fa1ca0608992 Mon Sep 17 00:00:00 2001 From: Phillip Simbwa Date: Wed, 29 Dec 2010 12:01:16 -0800 Subject: Staging: ath6kl: fix potential buffer overflow Off by one Signed-off-by: Phillip Simbwa Signed-off-by: Vipin Mehta Signed-off-by: Greg Kroah-Hartman --- drivers/staging/ath6kl/miscdrv/ar3kps/ar3kpsconfig.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/staging/ath6kl/miscdrv/ar3kps/ar3kpsconfig.c b/drivers/staging/ath6kl/miscdrv/ar3kps/ar3kpsconfig.c index 0e298dba9fc..29b8ab44ea4 100644 --- a/drivers/staging/ath6kl/miscdrv/ar3kps/ar3kpsconfig.c +++ b/drivers/staging/ath6kl/miscdrv/ar3kps/ar3kpsconfig.c @@ -360,8 +360,8 @@ int PSSendOps(void *arg) status = 1; goto complete; } - len = (firmware->size > MAX_BDADDR_FORMAT_LENGTH)? MAX_BDADDR_FORMAT_LENGTH: firmware->size; - memcpy(config_bdaddr, firmware->data,len); + len = min(firmware->size, MAX_BDADDR_FORMAT_LENGTH - 1); + memcpy(config_bdaddr, firmware->data, len); config_bdaddr[len] = '\0'; write_bdaddr(hdev,config_bdaddr,BDADDR_TYPE_STRING); A_RELEASE_FIRMWARE(firmware); -- cgit v1.2.3-18-g5258 From f32b8453e5a5587ae112ba478ae0bbad74e83d22 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 23 Dec 2010 00:07:33 +0300 Subject: Staging: ste_rmi4: use after input_unregister_device() The original code called input_free_device(rmi4_data->input_dev) after input_unregister_device(rmi4_data->input_dev) and that's a double free. This is described in the comments to input_unregister_device(). The normal way to handle this is to make input_register_device() the last function in the probe which can fail. That way you can avoid the call to input_unregister_device() entirely. Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c index e8f047e86a3..80183a7e662 100644 --- a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c +++ b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c @@ -986,12 +986,6 @@ static int __devinit synaptics_rmi4_probe input_set_abs_params(rmi4_data->input_dev, ABS_MT_TOUCH_MAJOR, 0, MAX_TOUCH_MAJOR, 0, 0); - retval = input_register_device(rmi4_data->input_dev); - if (retval) { - dev_err(&client->dev, "%s:input register failed\n", __func__); - goto err_input_register; - } - /* Clear interrupts */ synaptics_rmi4_i2c_block_read(rmi4_data, rmi4_data->fn01_data_base_addr + 1, intr_status, @@ -1003,15 +997,20 @@ static int __devinit synaptics_rmi4_probe if (retval) { dev_err(&client->dev, "%s:Unable to get attn irq %d\n", __func__, platformdata->irq_number); - goto err_request_irq; + goto err_unset_clientdata; + } + + retval = input_register_device(rmi4_data->input_dev); + if (retval) { + dev_err(&client->dev, "%s:input register failed\n", __func__); + goto err_free_irq; } return retval; -err_request_irq: +err_free_irq: free_irq(platformdata->irq_number, rmi4_data); - input_unregister_device(rmi4_data->input_dev); -err_input_register: +err_unset_clientdata: i2c_set_clientdata(client, NULL); err_query_dev: if (platformdata->regulator_en) { -- cgit v1.2.3-18-g5258 From a65fd09ac5490133b09d08be91c31ae2f2fa5cad Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 4 Jan 2011 09:02:27 +0300 Subject: Staging: xgfib: put parenthesis in the right place In the original code the parenthesis are in the wrong position, so the conditions are always true. Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- drivers/staging/xgifb/vb_setmode.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/staging/xgifb/vb_setmode.c b/drivers/staging/xgifb/vb_setmode.c index 7016fdd2509..e19b932492e 100644 --- a/drivers/staging/xgifb/vb_setmode.c +++ b/drivers/staging/xgifb/vb_setmode.c @@ -3954,8 +3954,8 @@ void XGI_GetCRT2ResInfo(unsigned short ModeNo, unsigned short ModeIdIndex, unsigned char XGI_IsLCDDualLink(struct vb_device_info *pVBInfo) { - if ((((pVBInfo->VBInfo & SetCRT2ToLCD) | SetCRT2ToLCDA)) - && (pVBInfo->LCDInfo & SetLCDDualLink)) /* shampoo0129 */ + if ((pVBInfo->VBInfo & (SetCRT2ToLCD | SetCRT2ToLCDA)) && + (pVBInfo->LCDInfo & SetLCDDualLink)) /* shampoo0129 */ return 1; return 0; @@ -8773,7 +8773,7 @@ unsigned short XGI_GetVCLK2Ptr(unsigned short ModeNo, if (pVBInfo->IF_DEF_LVDS == 0) { CRT2Index = CRT2Index >> 6; /* for LCD */ - if (((pVBInfo->VBInfo & SetCRT2ToLCD) | SetCRT2ToLCDA)) { /*301b*/ + if (pVBInfo->VBInfo & (SetCRT2ToLCD | SetCRT2ToLCDA)) { /*301b*/ if (pVBInfo->LCDResInfo != Panel1024x768) VCLKIndex = LCDXlat2VCLK[CRT2Index]; else -- cgit v1.2.3-18-g5258 From 27c82819a5a42f08fc0f787ab1b0c129cbdda801 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 12 Jan 2011 22:24:28 -0600 Subject: staging: rt2870sta: Add ID for Linksys WUSB100v2 This device was tested with rt2870sta by setting new_id. Signed-off-by: Larry Finger Tested-by: Brian Ormond Cc: Stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rt2860/usb_main_dev.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/rt2860/usb_main_dev.c b/drivers/staging/rt2860/usb_main_dev.c index ee68d51caa4..322bf49ee90 100644 --- a/drivers/staging/rt2860/usb_main_dev.c +++ b/drivers/staging/rt2860/usb_main_dev.c @@ -106,6 +106,7 @@ struct usb_device_id rtusb_usb_id[] = { {USB_DEVICE(0x0411, 0x016f)}, /* MelCo.,Inc. WLI-UC-G301N */ {USB_DEVICE(0x1737, 0x0070)}, /* Linksys WUSB100 */ {USB_DEVICE(0x1737, 0x0071)}, /* Linksys WUSB600N */ + {USB_DEVICE(0x1737, 0x0078)}, /* Linksys WUSB100v2 */ {USB_DEVICE(0x0411, 0x00e8)}, /* Buffalo WLI-UC-G300N */ {USB_DEVICE(0x050d, 0x815c)}, /* Belkin F5D8053 */ {USB_DEVICE(0x100D, 0x9031)}, /* Motorola 2770 */ -- cgit v1.2.3-18-g5258 From 8e290fd41a15e392af87a33c9c4db3daffcd558b Mon Sep 17 00:00:00 2001 From: "Guzman Lugo, Fernando" Date: Thu, 13 Jan 2011 23:34:52 -0600 Subject: staging: tidspbridge: configure full L1 MMU range IVA MMU can manage up to 4GB of address space through its page tables, given that it's L1 is divided into 1MB sections it requires at least 16KB for its table which represents 4096 entries of 32 bits each. Previously, only 1GB was being handled by setting the page table size to 4KB, any virtual address beyond of the L1 size used, would fall into memory that does not belong to L1 translation tables, leading to unpredictable results. So, set the L1 table size to cover the entire MMU range (4GB) whether is meant to be used or not. Reported-by: Felipe Contreras Signed-off-by: Fernando Guzman Lugo Signed-off-by: Felipe Contreras Signed-off-by: Omar Ramirez Luna Signed-off-by: Greg Kroah-Hartman --- drivers/staging/tidspbridge/core/tiomap3430.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/staging/tidspbridge/core/tiomap3430.c b/drivers/staging/tidspbridge/core/tiomap3430.c index a3b0a183d57..c3126e2e23f 100644 --- a/drivers/staging/tidspbridge/core/tiomap3430.c +++ b/drivers/staging/tidspbridge/core/tiomap3430.c @@ -786,10 +786,7 @@ static int bridge_dev_create(struct bridge_dev_context pt_attrs = kzalloc(sizeof(struct pg_table_attrs), GFP_KERNEL); if (pt_attrs != NULL) { - /* Assuming that we use only DSP's memory map - * until 0x4000:0000 , we would need only 1024 - * L1 enties i.e L1 size = 4K */ - pt_attrs->l1_size = 0x1000; + pt_attrs->l1_size = SZ_16K; /* 4096 entries of 32 bits */ align_size = pt_attrs->l1_size; /* Align sizes are expected to be power of 2 */ /* we like to get aligned on L1 table size */ -- cgit v1.2.3-18-g5258 From e375870b9295be40de7372c3c9de6799e254c96a Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Fri, 14 Jan 2011 14:54:08 -0600 Subject: staging: r8712u: Fix memory leak in firmware loading The error path leaks the firmware struct. Signed-off-by: Larry Finger Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8712/hal_init.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/staging/rtl8712/hal_init.c b/drivers/staging/rtl8712/hal_init.c index 32088a641eb..84be383abec 100644 --- a/drivers/staging/rtl8712/hal_init.c +++ b/drivers/staging/rtl8712/hal_init.c @@ -128,12 +128,13 @@ static u8 rtl8712_dl_fw(struct _adapter *padapter) u8 *ptmpchar = NULL, *ppayload, *ptr; struct tx_desc *ptx_desc; u32 txdscp_sz = sizeof(struct tx_desc); + u8 ret = _FAIL; ulfilelength = rtl871x_open_fw(padapter, &phfwfile_hdl, &pmappedfw); if (pmappedfw && (ulfilelength > 0)) { update_fwhdr(&fwhdr, pmappedfw); if (chk_fwhdr(&fwhdr, ulfilelength) == _FAIL) - goto exit_fail; + goto firmware_rel; fill_fwpriv(padapter, &fwhdr.fwpriv); /* firmware check ok */ maxlen = (fwhdr.img_IMEM_size > fwhdr.img_SRAM_size) ? @@ -141,7 +142,7 @@ static u8 rtl8712_dl_fw(struct _adapter *padapter) maxlen += txdscp_sz; ptmpchar = _malloc(maxlen + FWBUFF_ALIGN_SZ); if (ptmpchar == NULL) - return _FAIL; + goto firmware_rel; ptx_desc = (struct tx_desc *)(ptmpchar + FWBUFF_ALIGN_SZ - ((addr_t)(ptmpchar) & (FWBUFF_ALIGN_SZ - 1))); @@ -273,11 +274,13 @@ static u8 rtl8712_dl_fw(struct _adapter *padapter) goto exit_fail; } else goto exit_fail; - return _SUCCESS; + ret = _SUCCESS; exit_fail: kfree(ptmpchar); - return _FAIL; +firmware_rel: + release_firmware((struct firmware *)phfwfile_hdl); + return ret; } uint rtl8712_hal_init(struct _adapter *padapter) -- cgit v1.2.3-18-g5258 From 9c33008412683eba91bce2dc4575f28c728b6bd1 Mon Sep 17 00:00:00 2001 From: Denis Kirjanov Date: Mon, 10 Jan 2011 20:09:30 +0000 Subject: staging: rt2860: Fix incorrect netif_stop_queue usage warning The TX queues are allocated inside register_netdev. It doesn't make any sense to stop the queue before allocation. Signed-off-by: Denis Kirjanov Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rt2860/rt_main_dev.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/staging/rt2860/rt_main_dev.c b/drivers/staging/rt2860/rt_main_dev.c index 701561d6b6f..236dd36d349 100644 --- a/drivers/staging/rt2860/rt_main_dev.c +++ b/drivers/staging/rt2860/rt_main_dev.c @@ -484,8 +484,6 @@ struct net_device *RtmpPhyNetDevInit(struct rt_rtmp_adapter *pAd, net_dev->ml_priv = (void *)pAd; pAd->net_dev = net_dev; - netif_stop_queue(net_dev); - return net_dev; } -- cgit v1.2.3-18-g5258 From e71a7fd259943a2c2e11484880c80248ad139fe5 Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Thu, 13 Jan 2011 18:37:36 +0100 Subject: iio: Fixpoint formatted output bugfix Fix some ADC drivers' _scale interface to correct fixpoint formatted output Signed-off-by: Roland Stigge Acked-by: Jonathan Cameron Acked-by: Michael Hennerich Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/iio/adc/ad7476_core.c | 2 +- drivers/staging/iio/adc/ad799x_core.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/staging/iio/adc/ad7476_core.c b/drivers/staging/iio/adc/ad7476_core.c index deb68c8a6e1..b8b54da67c6 100644 --- a/drivers/staging/iio/adc/ad7476_core.c +++ b/drivers/staging/iio/adc/ad7476_core.c @@ -68,7 +68,7 @@ static ssize_t ad7476_show_scale(struct device *dev, /* Corresponds to Vref / 2^(bits) */ unsigned int scale_uv = (st->int_vref_mv * 1000) >> st->chip_info->bits; - return sprintf(buf, "%d.%d\n", scale_uv / 1000, scale_uv % 1000); + return sprintf(buf, "%d.%03d\n", scale_uv / 1000, scale_uv % 1000); } static IIO_DEVICE_ATTR(in_scale, S_IRUGO, ad7476_show_scale, NULL, 0); diff --git a/drivers/staging/iio/adc/ad799x_core.c b/drivers/staging/iio/adc/ad799x_core.c index 6309d521a86..89ccf375a18 100644 --- a/drivers/staging/iio/adc/ad799x_core.c +++ b/drivers/staging/iio/adc/ad799x_core.c @@ -432,7 +432,7 @@ static ssize_t ad799x_show_scale(struct device *dev, /* Corresponds to Vref / 2^(bits) */ unsigned int scale_uv = (st->int_vref_mv * 1000) >> st->chip_info->bits; - return sprintf(buf, "%d.%d\n", scale_uv / 1000, scale_uv % 1000); + return sprintf(buf, "%d.%03d\n", scale_uv / 1000, scale_uv % 1000); } static IIO_DEVICE_ATTR(in_scale, S_IRUGO, ad799x_show_scale, NULL, 0); -- cgit v1.2.3-18-g5258 From e7bf352fcd85c33b0805da891fc97fea8b5e996e Mon Sep 17 00:00:00 2001 From: roel kluin Date: Mon, 3 Jan 2011 11:59:48 -0800 Subject: Staging: speakup: &&/|| confusion in silent_store() Fix test: the branch is always taken. Signed-off-by: Roel Kluin Cc: Andrew Morton Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/speakup/kobjects.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/speakup/kobjects.c b/drivers/staging/speakup/kobjects.c index 408bb9b3303..07a7f543259 100644 --- a/drivers/staging/speakup/kobjects.c +++ b/drivers/staging/speakup/kobjects.c @@ -332,7 +332,7 @@ static ssize_t silent_store(struct kobject *kobj, struct kobj_attribute *attr, unsigned long flags; len = strlen(buf); - if (len > 0 || len < 3) { + if (len > 0 && len < 3) { ch = buf[0]; if (ch == '\n') ch = '0'; -- cgit v1.2.3-18-g5258 From d1ce318496f5943d2cc5e20171fc383a59a1421f Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Wed, 19 Jan 2011 11:48:44 +0000 Subject: staging: comedi: ni_labpc: Use shared IRQ for PCMCIA card The ni_labpc driver module only requests a shared IRQ for PCI devices, requesting a non-shared IRQ for non-PCI devices. As this module is also used by the ni_labpc_cs module for certain National Instruments PCMCIA cards, it also needs to request a shared IRQ for PCMCIA devices, otherwise you get a IRQ mismatch with the CardBus controller. Signed-off-by: Ian Abbott Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/ni_labpc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c index 4d1868d04ba..0728c3c0cb0 100644 --- a/drivers/staging/comedi/drivers/ni_labpc.c +++ b/drivers/staging/comedi/drivers/ni_labpc.c @@ -575,7 +575,8 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase, /* grab our IRQ */ if (irq) { isr_flags = 0; - if (thisboard->bustype == pci_bustype) + if (thisboard->bustype == pci_bustype + || thisboard->bustype == pcmcia_bustype) isr_flags |= IRQF_SHARED; if (request_irq(irq, labpc_interrupt, isr_flags, driver_labpc.driver_name, dev)) { -- cgit v1.2.3-18-g5258 From 85d139c977dd13cd1ca5cb3b9d8e39cb477eaf0c Mon Sep 17 00:00:00 2001 From: Omar Ramirez Luna Date: Fri, 14 Jan 2011 17:49:51 -0600 Subject: staging: tidspbridge: replace mbox callback with notifier_call Lately, mailbox callbacks have been replaced by notifier block call chains, this needs to be changed in the users of mailbox, otherwise compilation will break due to missing parameters. For this new change to work, io_mbox_msg needs to be compatible with the notifier_call definition. Reported-by: Hari Kanigeri Signed-off-by: Omar Ramirez Luna Signed-off-by: Greg Kroah-Hartman --- drivers/staging/tidspbridge/core/io_sm.c | 8 ++++---- drivers/staging/tidspbridge/core/tiomap3430.c | 10 ++++++---- .../staging/tidspbridge/include/dspbridge/io_sm.h | 21 ++++++++------------- 3 files changed, 18 insertions(+), 21 deletions(-) diff --git a/drivers/staging/tidspbridge/core/io_sm.c b/drivers/staging/tidspbridge/core/io_sm.c index 571864555dd..27e0aa81a58 100644 --- a/drivers/staging/tidspbridge/core/io_sm.c +++ b/drivers/staging/tidspbridge/core/io_sm.c @@ -949,7 +949,7 @@ func_end: * Calls the Bridge's CHNL_ISR to determine if this interrupt is ours, then * schedules a DPC to dispatch I/O. */ -void io_mbox_msg(u32 msg) +int io_mbox_msg(struct notifier_block *self, unsigned long len, void *msg) { struct io_mgr *pio_mgr; struct dev_object *dev_obj; @@ -959,9 +959,9 @@ void io_mbox_msg(u32 msg) dev_get_io_mgr(dev_obj, &pio_mgr); if (!pio_mgr) - return; + return NOTIFY_BAD; - pio_mgr->intr_val = (u16)msg; + pio_mgr->intr_val = (u16)((u32)msg); if (pio_mgr->intr_val & MBX_PM_CLASS) io_dispatch_pm(pio_mgr); @@ -973,7 +973,7 @@ void io_mbox_msg(u32 msg) spin_unlock_irqrestore(&pio_mgr->dpc_lock, flags); tasklet_schedule(&pio_mgr->dpc_tasklet); } - return; + return NOTIFY_OK; } /* diff --git a/drivers/staging/tidspbridge/core/tiomap3430.c b/drivers/staging/tidspbridge/core/tiomap3430.c index c3126e2e23f..a3f69f6f505 100644 --- a/drivers/staging/tidspbridge/core/tiomap3430.c +++ b/drivers/staging/tidspbridge/core/tiomap3430.c @@ -223,6 +223,10 @@ static struct bridge_drv_interface drv_interface_fxns = { bridge_msg_set_queue_id, }; +static struct notifier_block dsp_mbox_notifier = { + .notifier_call = io_mbox_msg, +}; + static inline void flush_all(struct bridge_dev_context *dev_context) { if (dev_context->dw_brd_state == BRD_DSP_HIBERNATION || @@ -553,7 +557,7 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt, * Enable Mailbox events and also drain any pending * stale messages. */ - dev_context->mbox = omap_mbox_get("dsp"); + dev_context->mbox = omap_mbox_get("dsp", &dsp_mbox_notifier); if (IS_ERR(dev_context->mbox)) { dev_context->mbox = NULL; pr_err("%s: Failed to get dsp mailbox handle\n", @@ -563,8 +567,6 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt, } if (!status) { - dev_context->mbox->rxq->callback = (int (*)(void *))io_mbox_msg; - /*PM_IVA2GRPSEL_PER = 0xC0;*/ temp = readl(resources->dw_per_pm_base + 0xA8); temp = (temp & 0xFFFFFF30) | 0xC0; @@ -685,7 +687,7 @@ static int bridge_brd_stop(struct bridge_dev_context *dev_ctxt) /* Disable the mailbox interrupts */ if (dev_context->mbox) { omap_mbox_disable_irq(dev_context->mbox, IRQ_RX); - omap_mbox_put(dev_context->mbox); + omap_mbox_put(dev_context->mbox, &dsp_mbox_notifier); dev_context->mbox = NULL; } /* Reset IVA2 clocks*/ diff --git a/drivers/staging/tidspbridge/include/dspbridge/io_sm.h b/drivers/staging/tidspbridge/include/dspbridge/io_sm.h index 18aec55d864..8242c70e09d 100644 --- a/drivers/staging/tidspbridge/include/dspbridge/io_sm.h +++ b/drivers/staging/tidspbridge/include/dspbridge/io_sm.h @@ -72,22 +72,17 @@ extern void io_dpc(unsigned long ref_data); /* * ======== io_mbox_msg ======== * Purpose: - * Main interrupt handler for the shared memory Bridge channel manager. - * Calls the Bridge's chnlsm_isr to determine if this interrupt is ours, - * then schedules a DPC to dispatch I/O. + * Main message handler for the shared memory Bridge channel manager. + * Determine if this message is ours, then schedules a DPC to + * dispatch I/O. * Parameters: - * ref_data: Pointer to the channel manager object for this board. - * Set in an initial call to ISR_Install(). + * self: Pointer to its own notifier_block struct. + * len: Length of message. + * msg: Message code received. * Returns: - * TRUE if interrupt handled; FALSE otherwise. - * Requires: - * Must be in locked memory if executing in kernel mode. - * Must only call functions which are in locked memory if Kernel mode. - * Must only call asynchronous services. - * Interrupts are disabled and EOI for this interrupt has been sent. - * Ensures: + * NOTIFY_OK if handled; NOTIFY_BAD otherwise. */ -void io_mbox_msg(u32 msg); +int io_mbox_msg(struct notifier_block *self, unsigned long len, void *msg); /* * ======== io_request_chnl ======== -- cgit v1.2.3-18-g5258 From 2d8f4595d1f275f424a8920bb2563fc547661213 Mon Sep 17 00:00:00 2001 From: Max Vozeler Date: Wed, 12 Jan 2011 15:01:59 +0200 Subject: staging: usbip: stub: update refcounts for devices and interfaces The stub driver expects to access the usb interface and usb device structures even if the device has been disconnected in the meantime. This change gets a reference to them in the stub probe function using usb_get_intf()/usb_get_dev() and drops them in the disconnect function. This fixes an oops observed with a Logic Controls Line display (0fa8:a030) which disconnects itself when it is reset: [ 1348.562274] BUG: unable to handle kernel paging request at 5f7433e5 [ 1348.562327] IP: [] usb_lock_device_for_reset+0x22/0xd0 [ 1348.562374] *pde = 00000000 [ 1348.562397] Oops: 0000 [#1] [ 1348.562418] last sysfs file: /sys/devices/pci0000:00/0000:00:10.2/usb4/4-1/bConfigurationValue [ 1348.562454] Modules linked in: usbip vhci_hcd usbip_common_mod fbcon tileblit font bitblit softcursor serio_raw uvesafb pcspkr via_rng snd_via82xx gameport snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_oss snd_seq_midi_event snd_seq snd_timer snd_seq_device snd usbhid hid via_rhine soundcore mii igel_flash aufs pata_via [ 1348.562649] [ 1348.562670] Pid: 2855, comm: usbip_eh Not tainted (2.6.32 #23.37-ud-r113) M300C [ 1348.562704] EIP: 0060:[] EFLAGS: 00010216 CPU: 0 [ 1348.562734] EIP is at usb_lock_device_for_reset+0x22/0xd0 [ 1348.562762] EAX: 5f7433cd EBX: 5f7433cd ECX: de293a5c EDX: dd326a00 [ 1348.562793] ESI: 5f7433cd EDI: 000400f6 EBP: cf43ff48 ESP: cf43ff38 [ 1348.562824] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 [ 1348.562854] Process usbip_eh (pid: 2855, ti=cf43e000 task=d2c7f230 task.ti=cf43e000) [ 1348.562884] Stack: [ 1348.562900] d6ec9960 de2939cc 5f7433cd 5f743431 cf43ff70 df8fd32f de2939cc d2c7f230 [ 1348.562940] <0> cf43ff70 00000282 00000282 de2939cc d2c7f230 d2c7f230 cf43ffa8 df84416d [ 1348.562987] <0> cf43ff88 d2c7f230 de293a24 d2c7f230 00000000 d2c7f230 c014e760 cf43ff94 [ 1348.563042] Call Trace: [ 1348.563073] [] ? stub_device_reset+0x3f/0x110 [usbip] [ 1348.563114] [] ? event_handler_loop+0xcd/0xe8 [usbip_common_mod] [ 1348.563156] [] ? autoremove_wake_function+0x0/0x50 [ 1348.563193] [] ? usbip_thread+0x0/0x60 [usbip_common_mod] [ 1348.563230] [] ? usbip_thread+0x51/0x60 [usbip_common_mod] [ 1348.563265] [] ? kthread+0x74/0x80 [ 1348.563294] [] ? kthread+0x0/0x80 [ 1348.563326] [] ? kernel_thread_helper+0x7/0x10 [ 1348.563351] Code: 00 e8 73 4d 00 00 5d c3 90 55 89 e5 83 ec 10 89 5d f4 89 75 f8 89 7d fc 0f 1f 44 00 00 8b 3d c0 2e 67 c0 81 c7 fa 00 00 00 89 c3 <8b> 40 18 89 d6 85 c0 75 15 b8 ed ff ff ff 8b 5d f4 8b 75 f8 8b [ 1348.563528] EIP: [] usb_lock_device_for_reset+0x22/0xd0 SS:ESP 0068:cf43ff38 [ 1348.563570] CR2: 000000005f7433e5 [ 1348.563593] ---[ end trace 9c3f1e3a2e5299d9 ]--- Signed-off-by: Max Vozeler Tested-by: Mark Wehby Tested-by: Steven Harms Signed-off-by: Greg Kroah-Hartman --- drivers/staging/usbip/stub.h | 1 + drivers/staging/usbip/stub_dev.c | 18 ++++++++++++++---- drivers/staging/usbip/stub_rx.c | 4 ++-- 3 files changed, 17 insertions(+), 6 deletions(-) diff --git a/drivers/staging/usbip/stub.h b/drivers/staging/usbip/stub.h index 30dbfb6d16f..d73267961ef 100644 --- a/drivers/staging/usbip/stub.h +++ b/drivers/staging/usbip/stub.h @@ -32,6 +32,7 @@ struct stub_device { struct usb_interface *interface; + struct usb_device *udev; struct list_head list; struct usbip_device ud; diff --git a/drivers/staging/usbip/stub_dev.c b/drivers/staging/usbip/stub_dev.c index b186b5fed2b..a7ce51cc890 100644 --- a/drivers/staging/usbip/stub_dev.c +++ b/drivers/staging/usbip/stub_dev.c @@ -258,10 +258,11 @@ static void stub_shutdown_connection(struct usbip_device *ud) static void stub_device_reset(struct usbip_device *ud) { struct stub_device *sdev = container_of(ud, struct stub_device, ud); - struct usb_device *udev = interface_to_usbdev(sdev->interface); + struct usb_device *udev = sdev->udev; int ret; usbip_udbg("device reset"); + ret = usb_lock_device_for_reset(udev, sdev->interface); if (ret < 0) { dev_err(&udev->dev, "lock for reset\n"); @@ -309,7 +310,8 @@ static void stub_device_unusable(struct usbip_device *ud) * * Allocates and initializes a new stub_device struct. */ -static struct stub_device *stub_device_alloc(struct usb_interface *interface) +static struct stub_device *stub_device_alloc(struct usb_device *udev, + struct usb_interface *interface) { struct stub_device *sdev; int busnum = interface_to_busnum(interface); @@ -324,7 +326,8 @@ static struct stub_device *stub_device_alloc(struct usb_interface *interface) return NULL; } - sdev->interface = interface; + sdev->interface = usb_get_intf(interface); + sdev->udev = usb_get_dev(udev); /* * devid is defined with devnum when this driver is first allocated. @@ -450,11 +453,12 @@ static int stub_probe(struct usb_interface *interface, return err; } + usb_get_intf(interface); return 0; } /* ok. this is my device. */ - sdev = stub_device_alloc(interface); + sdev = stub_device_alloc(udev, interface); if (!sdev) return -ENOMEM; @@ -476,6 +480,8 @@ static int stub_probe(struct usb_interface *interface, dev_err(&interface->dev, "create sysfs files for %s\n", udev_busid); usb_set_intfdata(interface, NULL); + usb_put_intf(interface); + busid_priv->interf_count = 0; busid_priv->sdev = NULL; @@ -545,6 +551,7 @@ static void stub_disconnect(struct usb_interface *interface) if (busid_priv->interf_count > 1) { busid_priv->interf_count--; shutdown_busid(busid_priv); + usb_put_intf(interface); return; } @@ -554,6 +561,9 @@ static void stub_disconnect(struct usb_interface *interface) /* 1. shutdown the current connection */ shutdown_busid(busid_priv); + usb_put_dev(sdev->udev); + usb_put_intf(interface); + /* 3. free sdev */ busid_priv->sdev = NULL; stub_device_free(sdev); diff --git a/drivers/staging/usbip/stub_rx.c b/drivers/staging/usbip/stub_rx.c index 3de6fd2539d..ae6ac82754a 100644 --- a/drivers/staging/usbip/stub_rx.c +++ b/drivers/staging/usbip/stub_rx.c @@ -364,7 +364,7 @@ static struct stub_priv *stub_priv_alloc(struct stub_device *sdev, static int get_pipe(struct stub_device *sdev, int epnum, int dir) { - struct usb_device *udev = interface_to_usbdev(sdev->interface); + struct usb_device *udev = sdev->udev; struct usb_host_endpoint *ep; struct usb_endpoint_descriptor *epd = NULL; @@ -484,7 +484,7 @@ static void stub_recv_cmd_submit(struct stub_device *sdev, int ret; struct stub_priv *priv; struct usbip_device *ud = &sdev->ud; - struct usb_device *udev = interface_to_usbdev(sdev->interface); + struct usb_device *udev = sdev->udev; int pipe = get_pipe(sdev, pdu->base.ep, pdu->base.direction); -- cgit v1.2.3-18-g5258 From 7606ee8aa33287dd3e6eb44c78541b87a413a325 Mon Sep 17 00:00:00 2001 From: Max Vozeler Date: Wed, 12 Jan 2011 15:02:00 +0200 Subject: staging: usbip: vhci: update reference count for usb_device This fixes an oops observed when reading status during removal of a device: [ 1706.648285] general protection fault: 0000 [#1] SMP [ 1706.648294] last sysfs file: /sys/devices/platform/vhci_hcd/status [ 1706.648297] CPU 1 [ 1706.648300] Modules linked in: binfmt_misc microcode fuse loop vhci_hcd(N) usbip(N) usbcore usbip_common_mod(N) rtc_core rtc_lib joydev dm_mirror dm_region_hash dm_log linear dm_snapshot xennet dm_mod ext3 mbcache jbd processor thermal_sys hwmon xenblk cdrom [ 1706.648324] Supported: Yes [ 1706.648327] Pid: 10422, comm: usbip Tainted: G N 2.6.32.12-0.7-xen #1 [ 1706.648330] RIP: e030:[] [] strnlen+0x5/0x40 [ 1706.648340] RSP: e02b:ffff8800a994dd30 EFLAGS: 00010286 [ 1706.648343] RAX: ffffffff80481ec1 RBX: 0000000000000000 RCX: 0000000000000002 [ 1706.648347] RDX: 00200d1d4f1c001c RSI: ffffffffffffffff RDI: 00200d1d4f1c001c [ 1706.648350] RBP: ffff880129a1c0aa R08: ffffffffa01901c4 R09: 0000000000000006 [ 1706.648353] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800a9a1c0ab [ 1706.648357] R13: 00200d1d4f1c001c R14: 00000000ffffffff R15: ffff880129a1c0aa [ 1706.648363] FS: 00007f2f2e9ca700(0000) GS:ffff880001018000(0000) knlGS:0000000000000000 [ 1706.648367] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1706.648370] CR2: 000000000071b048 CR3: 00000000b4b68000 CR4: 0000000000002660 [ 1706.648374] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1706.648378] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 1706.648381] Process usbip (pid: 10422, threadinfo ffff8800a994c000, task ffff88007b170200) [ 1706.648385] Stack: [ 1706.648387] ffffffff801b28c9 0000000000000002 ffffffffa01901c4 ffff8800a9a1c0ab [ 1706.648391] <0> ffffffffa01901c6 ffff8800a994de08 ffffffff801b339b 0000000000000004 [ 1706.648397] <0> 0000000affffffff ffffffffffffffff 00000000000067c0 0000000000000000 [ 1706.648404] Call Trace: [ 1706.648413] [] string+0x39/0xe0 [ 1706.648419] [] vsnprintf+0x1eb/0x620 [ 1706.648423] [] sprintf+0x43/0x50 [ 1706.648429] [] show_status+0x1b9/0x220 [vhci_hcd] [ 1706.648438] [] dev_attr_show+0x27/0x60 [ 1706.648445] [] sysfs_read_file+0x101/0x1d0 [ 1706.648451] [] vfs_read+0xc7/0x130 [ 1706.648457] [] sys_read+0x53/0xa0 [ 1706.648462] [] system_call_fastpath+0x16/0x1b [ 1706.648468] [<00007f2f2de40f30>] 0x7f2f2de40f30 [ 1706.648470] Code: 66 0f 1f 44 00 00 48 83 c2 01 80 3a 00 75 f7 48 89 d0 48 29 f8 f3 c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 48 85 f6 74 29 <80> 3f 00 74 24 48 8d 56 ff 48 89 f8 eb 0e 0f 1f 44 00 00 48 83 [ 1706.648507] RIP [] strnlen+0x5/0x40 [ 1706.648511] RSP [ 1706.649575] ---[ end trace b4eb72bf2e149593 ]--- Signed-off-by: Max Vozeler Tested-by: Mark Wehby Signed-off-by: Greg Kroah-Hartman --- drivers/staging/usbip/vhci_hcd.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/staging/usbip/vhci_hcd.c b/drivers/staging/usbip/vhci_hcd.c index 08bd26a245d..5f1e2b0a628 100644 --- a/drivers/staging/usbip/vhci_hcd.c +++ b/drivers/staging/usbip/vhci_hcd.c @@ -607,7 +607,9 @@ static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, dev_info(dev, "SetAddress Request (%d) to port %d\n", ctrlreq->wValue, vdev->rhport); - vdev->udev = urb->dev; + if (vdev->udev) + usb_put_dev(vdev->udev); + vdev->udev = usb_get_dev(urb->dev); spin_lock(&vdev->ud.lock); vdev->ud.status = VDEV_ST_USED; @@ -627,8 +629,9 @@ static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, "Get_Descriptor to device 0 " "(get max pipe size)\n"); - /* FIXME: reference count? (usb_get_dev()) */ - vdev->udev = urb->dev; + if (vdev->udev) + usb_put_dev(vdev->udev); + vdev->udev = usb_get_dev(urb->dev); goto out; default: @@ -887,6 +890,10 @@ static void vhci_device_reset(struct usbip_device *ud) vdev->speed = 0; vdev->devid = 0; + if (vdev->udev) + usb_put_dev(vdev->udev); + vdev->udev = NULL; + ud->tcp_socket = NULL; ud->status = VDEV_ST_NULL; -- cgit v1.2.3-18-g5258 From b92a5e23737172c52656a090977408a80d7f06d1 Mon Sep 17 00:00:00 2001 From: Max Vozeler Date: Wed, 12 Jan 2011 15:02:01 +0200 Subject: staging: usbip: vhci: give back URBs from in-flight unlink requests If we never received a RET_UNLINK because the TCP connection broke the pending URBs still need to be unlinked and given back. Previously processes would be stuck trying to kill the URB even after the device was detached. Signed-off-by: Max Vozeler Tested-by: Mark Wehby Signed-off-by: Greg Kroah-Hartman --- drivers/staging/usbip/vhci.h | 3 +++ drivers/staging/usbip/vhci_hcd.c | 24 +++++++++++++++++++++++- drivers/staging/usbip/vhci_rx.c | 15 +++++++++------ 3 files changed, 35 insertions(+), 7 deletions(-) diff --git a/drivers/staging/usbip/vhci.h b/drivers/staging/usbip/vhci.h index 41a1fe5138f..2cfd00ec116 100644 --- a/drivers/staging/usbip/vhci.h +++ b/drivers/staging/usbip/vhci.h @@ -119,6 +119,9 @@ void rh_port_disconnect(int rhport); void vhci_rx_loop(struct usbip_task *ut); void vhci_tx_loop(struct usbip_task *ut); +struct urb *pickup_urb_and_free_priv(struct vhci_device *vdev, + __u32 seqnum); + #define hardware (&the_controller->pdev.dev) static inline struct vhci_device *port_to_vdev(__u32 port) diff --git a/drivers/staging/usbip/vhci_hcd.c b/drivers/staging/usbip/vhci_hcd.c index 5f1e2b0a628..3a22f65b66d 100644 --- a/drivers/staging/usbip/vhci_hcd.c +++ b/drivers/staging/usbip/vhci_hcd.c @@ -808,7 +808,6 @@ static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) return 0; } - static void vhci_device_unlink_cleanup(struct vhci_device *vdev) { struct vhci_unlink *unlink, *tmp; @@ -816,11 +815,34 @@ static void vhci_device_unlink_cleanup(struct vhci_device *vdev) spin_lock(&vdev->priv_lock); list_for_each_entry_safe(unlink, tmp, &vdev->unlink_tx, list) { + usbip_uinfo("unlink cleanup tx %lu\n", unlink->unlink_seqnum); list_del(&unlink->list); kfree(unlink); } list_for_each_entry_safe(unlink, tmp, &vdev->unlink_rx, list) { + struct urb *urb; + + /* give back URB of unanswered unlink request */ + usbip_uinfo("unlink cleanup rx %lu\n", unlink->unlink_seqnum); + + urb = pickup_urb_and_free_priv(vdev, unlink->unlink_seqnum); + if (!urb) { + usbip_uinfo("the urb (seqnum %lu) was already given back\n", + unlink->unlink_seqnum); + list_del(&unlink->list); + kfree(unlink); + continue; + } + + urb->status = -ENODEV; + + spin_lock(&the_controller->lock); + usb_hcd_unlink_urb_from_ep(vhci_to_hcd(the_controller), urb); + spin_unlock(&the_controller->lock); + + usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb, urb->status); + list_del(&unlink->list); kfree(unlink); } diff --git a/drivers/staging/usbip/vhci_rx.c b/drivers/staging/usbip/vhci_rx.c index 8147d7202b2..bdbedd25690 100644 --- a/drivers/staging/usbip/vhci_rx.c +++ b/drivers/staging/usbip/vhci_rx.c @@ -23,16 +23,14 @@ #include "vhci.h" -/* get URB from transmitted urb queue */ -static struct urb *pickup_urb_and_free_priv(struct vhci_device *vdev, +/* get URB from transmitted urb queue. caller must hold vdev->priv_lock */ +struct urb *pickup_urb_and_free_priv(struct vhci_device *vdev, __u32 seqnum) { struct vhci_priv *priv, *tmp; struct urb *urb = NULL; int status; - spin_lock(&vdev->priv_lock); - list_for_each_entry_safe(priv, tmp, &vdev->priv_rx, list) { if (priv->seqnum == seqnum) { urb = priv->urb; @@ -63,8 +61,6 @@ static struct urb *pickup_urb_and_free_priv(struct vhci_device *vdev, } } - spin_unlock(&vdev->priv_lock); - return urb; } @@ -74,9 +70,11 @@ static void vhci_recv_ret_submit(struct vhci_device *vdev, struct usbip_device *ud = &vdev->ud; struct urb *urb; + spin_lock(&vdev->priv_lock); urb = pickup_urb_and_free_priv(vdev, pdu->base.seqnum); + spin_unlock(&vdev->priv_lock); if (!urb) { usbip_uerr("cannot find a urb of seqnum %u\n", @@ -161,7 +159,12 @@ static void vhci_recv_ret_unlink(struct vhci_device *vdev, return; } + spin_lock(&vdev->priv_lock); + urb = pickup_urb_and_free_priv(vdev, unlink->unlink_seqnum); + + spin_unlock(&vdev->priv_lock); + if (!urb) { /* * I get the result of a unlink request. But, it seems that I -- cgit v1.2.3-18-g5258 From 6d212153a838354078cc7d96f9bb23b7d1fd3d1b Mon Sep 17 00:00:00 2001 From: Max Vozeler Date: Wed, 12 Jan 2011 15:02:02 +0200 Subject: staging: usbip: vhci: refuse to enqueue for dead connections There can be requests to enqueue URBs while we are shutting down a connection. Signed-off-by: Max Vozeler Tested-by: Mark Wehby Signed-off-by: Greg Kroah-Hartman --- drivers/staging/usbip/vhci_hcd.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/staging/usbip/vhci_hcd.c b/drivers/staging/usbip/vhci_hcd.c index 3a22f65b66d..22b1ad9ebd5 100644 --- a/drivers/staging/usbip/vhci_hcd.c +++ b/drivers/staging/usbip/vhci_hcd.c @@ -559,6 +559,7 @@ static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, struct device *dev = &urb->dev->dev; int ret = 0; unsigned long flags; + struct vhci_device *vdev; usbip_dbg_vhci_hc("enter, usb_hcd %p urb %p mem_flags %d\n", hcd, urb, mem_flags); @@ -574,6 +575,18 @@ static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, return urb->status; } + vdev = port_to_vdev(the_controller->pending_port); + + /* refuse enqueue for dead connection */ + spin_lock(&vdev->ud.lock); + if (vdev->ud.status == VDEV_ST_NULL || vdev->ud.status == VDEV_ST_ERROR) { + usbip_uerr("enqueue for inactive port %d\n", vdev->rhport); + spin_unlock(&vdev->ud.lock); + spin_unlock_irqrestore(&the_controller->lock, flags); + return -ENODEV; + } + spin_unlock(&vdev->ud.lock); + ret = usb_hcd_link_urb_to_ep(hcd, urb); if (ret) goto no_need_unlink; @@ -592,8 +605,6 @@ static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, __u8 type = usb_pipetype(urb->pipe); struct usb_ctrlrequest *ctrlreq = (struct usb_ctrlrequest *) urb->setup_packet; - struct vhci_device *vdev = - port_to_vdev(the_controller->pending_port); if (type != PIPE_CONTROL || !ctrlreq) { dev_err(dev, "invalid request to devnum 0\n"); -- cgit v1.2.3-18-g5258 From 7e249c8b0737429bbf534515f81aded93504f449 Mon Sep 17 00:00:00 2001 From: Max Vozeler Date: Wed, 12 Jan 2011 15:02:03 +0200 Subject: staging: usbip: vhci: friendly log messages for connection errors Also changes the event on connection close to be VDEV_EVENT_DOWN - no functional change. Signed-off-by: Max Vozeler Signed-off-by: Greg Kroah-Hartman --- drivers/staging/usbip/vhci_rx.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/staging/usbip/vhci_rx.c b/drivers/staging/usbip/vhci_rx.c index bdbedd25690..ac15cea7539 100644 --- a/drivers/staging/usbip/vhci_rx.c +++ b/drivers/staging/usbip/vhci_rx.c @@ -205,11 +205,23 @@ static void vhci_rx_pdu(struct usbip_device *ud) memset(&pdu, 0, sizeof(pdu)); - /* 1. receive a pdu header */ ret = usbip_xmit(0, ud->tcp_socket, (char *) &pdu, sizeof(pdu), 0); + if (ret < 0) { + if (ret == -ECONNRESET) + usbip_uinfo("connection reset by peer\n"); + else if (ret != -ERESTARTSYS) + usbip_uinfo("xmit failed %d\n", ret); + usbip_event_add(ud, VDEV_EVENT_ERROR_TCP); + return; + } + if (ret == 0) { + usbip_uinfo("connection closed"); + usbip_event_add(ud, VDEV_EVENT_DOWN); + return; + } if (ret != sizeof(pdu)) { - usbip_uerr("receiving pdu failed! size is %d, should be %d\n", + usbip_uerr("received pdu size is %d, should be %d\n", ret, (unsigned int)sizeof(pdu)); usbip_event_add(ud, VDEV_EVENT_ERROR_TCP); return; -- cgit v1.2.3-18-g5258 From bd65f6233f6bc3233e7910752689fe3a45dc2e0c Mon Sep 17 00:00:00 2001 From: Max Vozeler Date: Wed, 12 Jan 2011 15:02:04 +0200 Subject: staging: usbip: vhci: handle EAGAIN from SO_RCVTIMEO If there is a receive timeout without any active requests, we can tell the connection was idle and ignore the timeout. If there are active requests for which we expect to receive a reply we close the connection. This makes it possible to set an upper bound on the time a usbip device may be unresponsive. This is a workaround for the lack of heart-beat messages in the USBIP protocol. Extending the protocol would break compatibility with all previous stub versions, so this seems like the lesser evil. Signed-off-by: Max Vozeler Tested-by: Mark Wehby Signed-off-by: Greg Kroah-Hartman --- drivers/staging/usbip/vhci_rx.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) diff --git a/drivers/staging/usbip/vhci_rx.c b/drivers/staging/usbip/vhci_rx.c index ac15cea7539..bf699147094 100644 --- a/drivers/staging/usbip/vhci_rx.c +++ b/drivers/staging/usbip/vhci_rx.c @@ -193,6 +193,19 @@ static void vhci_recv_ret_unlink(struct vhci_device *vdev, return; } +static int vhci_priv_tx_empty(struct vhci_device *vdev) +{ + int empty = 0; + + spin_lock(&vdev->priv_lock); + + empty = list_empty(&vdev->priv_rx); + + spin_unlock(&vdev->priv_lock); + + return empty; +} + /* recv a pdu */ static void vhci_rx_pdu(struct usbip_device *ud) { @@ -210,8 +223,14 @@ static void vhci_rx_pdu(struct usbip_device *ud) if (ret < 0) { if (ret == -ECONNRESET) usbip_uinfo("connection reset by peer\n"); - else if (ret != -ERESTARTSYS) + else if (ret == -EAGAIN) { + /* ignore if connection was idle */ + if (vhci_priv_tx_empty(vdev)) + return; + usbip_uinfo("connection timed out with pending urbs\n"); + } else if (ret != -ERESTARTSYS) usbip_uinfo("xmit failed %d\n", ret); + usbip_event_add(ud, VDEV_EVENT_ERROR_TCP); return; } -- cgit v1.2.3-18-g5258 From 01446ef5af4e8802369bf4d257806e24345a9371 Mon Sep 17 00:00:00 2001 From: Max Vozeler Date: Wed, 12 Jan 2011 15:02:05 +0200 Subject: staging: usbip: vhci: use urb->dev->portnum to find port The access to pending_port was racy when two devices were being attached at the same time. Signed-off-by: Max Vozeler Tested-by: Mark Wehby Signed-off-by: Greg Kroah-Hartman --- drivers/staging/usbip/vhci.h | 3 --- drivers/staging/usbip/vhci_hcd.c | 4 +--- 2 files changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/staging/usbip/vhci.h b/drivers/staging/usbip/vhci.h index 2cfd00ec116..afc3b1a7188 100644 --- a/drivers/staging/usbip/vhci.h +++ b/drivers/staging/usbip/vhci.h @@ -100,9 +100,6 @@ struct vhci_hcd { * But, the index of this array begins from 0. */ struct vhci_device vdev[VHCI_NPORTS]; - - /* vhci_device which has not been assiged its address yet */ - int pending_port; }; diff --git a/drivers/staging/usbip/vhci_hcd.c b/drivers/staging/usbip/vhci_hcd.c index 22b1ad9ebd5..a35fe61268d 100644 --- a/drivers/staging/usbip/vhci_hcd.c +++ b/drivers/staging/usbip/vhci_hcd.c @@ -138,8 +138,6 @@ void rh_port_connect(int rhport, enum usb_device_speed speed) * the_controller->vdev[rhport].ud.status = VDEV_CONNECT; * spin_unlock(&the_controller->vdev[rhport].ud.lock); */ - the_controller->pending_port = rhport; - spin_unlock_irqrestore(&the_controller->lock, flags); usb_hcd_poll_rh_status(vhci_to_hcd(the_controller)); @@ -575,7 +573,7 @@ static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, return urb->status; } - vdev = port_to_vdev(the_controller->pending_port); + vdev = port_to_vdev(urb->dev->portnum-1); /* refuse enqueue for dead connection */ spin_lock(&vdev->ud.lock); -- cgit v1.2.3-18-g5258 From 6a3c869a6021f4abcd69aa5fbb15c63f69eb36fe Mon Sep 17 00:00:00 2001 From: Dimitris Michailidis Date: Wed, 19 Jan 2011 15:29:05 +0000 Subject: cxgb4: fix reported state of interfaces without link Currently tools like ip and ifconfig report incorrect state for cxgb4 interfaces that are up but do not have link and do so until first link establishment. This is because the initial netif_carrier_off call is before register_netdev and it needs to be after to be fully effective. Fix this by moving netif_carrier_off into .ndo_open. Signed-off-by: Dimitris Michailidis Signed-off-by: David S. Miller --- drivers/net/cxgb4/cxgb4_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/cxgb4/cxgb4_main.c b/drivers/net/cxgb4/cxgb4_main.c index 059c1eec8c3..ec35d458102 100644 --- a/drivers/net/cxgb4/cxgb4_main.c +++ b/drivers/net/cxgb4/cxgb4_main.c @@ -2710,6 +2710,8 @@ static int cxgb_open(struct net_device *dev) struct port_info *pi = netdev_priv(dev); struct adapter *adapter = pi->adapter; + netif_carrier_off(dev); + if (!(adapter->flags & FULL_INIT_DONE)) { err = cxgb_up(adapter); if (err < 0) @@ -3661,7 +3663,6 @@ static int __devinit init_one(struct pci_dev *pdev, pi->xact_addr_filt = -1; pi->rx_offload = RX_CSO; pi->port_id = i; - netif_carrier_off(netdev); netdev->irq = pdev->irq; netdev->features |= NETIF_F_SG | TSO_FLAGS; -- cgit v1.2.3-18-g5258 From b30532515f0a62bfe17207ab00883dd262497006 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Thu, 20 Jan 2011 09:02:31 +0000 Subject: bonding: Ensure that we unshare skbs prior to calling pskb_may_pull Recently reported oops: kernel BUG at net/core/skbuff.c:813! invalid opcode: 0000 [#1] SMP last sysfs file: /sys/devices/virtual/net/bond0/broadcast CPU 8 Modules linked in: sit tunnel4 cpufreq_ondemand acpi_cpufreq freq_table bonding ipv6 dm_mirror dm_region_hash dm_log cdc_ether usbnet mii serio_raw i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support shpchp ioatdma i7core_edac edac_core bnx2 ixgbe dca mdio sg ext4 mbcache jbd2 sd_mod crc_t10dif mptsas mptscsih mptbase scsi_transport_sas dm_mod [last unloaded: microcode] Modules linked in: sit tunnel4 cpufreq_ondemand acpi_cpufreq freq_table bonding ipv6 dm_mirror dm_region_hash dm_log cdc_ether usbnet mii serio_raw i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support shpchp ioatdma i7core_edac edac_core bnx2 ixgbe dca mdio sg ext4 mbcache jbd2 sd_mod crc_t10dif mptsas mptscsih mptbase scsi_transport_sas dm_mod [last unloaded: microcode] Pid: 0, comm: swapper Not tainted 2.6.32-71.el6.x86_64 #1 BladeCenter HS22 -[7870AC1]- RIP: 0010:[] [] pskb_expand_head+0x36/0x1e0 RSP: 0018:ffff880028303b70 EFLAGS: 00010202 RAX: 0000000000000002 RBX: ffff880c6458ec80 RCX: 0000000000000020 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880c6458ec80 RBP: ffff880028303bc0 R08: ffffffff818a6180 R09: ffff880c6458ed64 R10: ffff880c622b36c0 R11: 0000000000000400 R12: 0000000000000000 R13: 0000000000000180 R14: ffff880c622b3000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff880028300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00000038653452a4 CR3: 0000000001001000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 0, threadinfo ffff8806649c2000, task ffff880c64f16ab0) Stack: ffff880028303bc0 ffffffff8104fff9 000000000000001c 0000000100000000 <0> ffff880000047d80 ffff880c6458ec80 000000000000001c ffff880c6223da00 <0> ffff880c622b3000 0000000000000000 ffff880028303c10 ffffffff81407f7a Call Trace: [] ? __wake_up_common+0x59/0x90 [] __pskb_pull_tail+0x2aa/0x360 [] bond_arp_rcv+0x2c0/0x2e0 [bonding] [] ? packet_rcv+0x377/0x440 [] netif_receive_skb+0x2db/0x670 [] napi_skb_finish+0x58/0x70 [] napi_gro_receive+0x39/0x50 [] ixgbe_clean_rx_irq+0x35b/0x900 [ixgbe] [] ixgbe_clean_rxtx_many+0x136/0x240 [ixgbe] [] net_rx_action+0x103/0x210 [] __do_softirq+0xb7/0x1e0 [] ? handle_IRQ_event+0x60/0x170 [] call_softirq+0x1c/0x30 [] do_softirq+0x65/0xa0 [] irq_exit+0x85/0x90 [] do_IRQ+0x75/0xf0 [] ret_from_intr+0x0/0x11 [] ? mwait_idle+0x71/0xd0 [] ? atomic_notifier_call_chain+0x1a/0x20 [] cpu_idle+0xb6/0x110 [] start_secondary+0x1fc/0x23f Resulted from bonding driver registering packet handlers via dev_add_pack and then trying to call pskb_may_pull. If another packet handler (like for AF_PACKET sockets) gets called first, the delivered skb will have a user count > 1, which causes pskb_may_pull to BUG halt when it does its skb_shared check. Fix this by calling skb_share_check prior to the may_pull call sites in the bonding driver to clone the skb when needed. Tested by myself and the reported successfully. Signed-off-by: Neil Horman CC: Andy Gospodarek CC: Jay Vosburgh CC: "David S. Miller" Signed-off-by: Jay Vosburgh Signed-off-by: Andy Gospodarek Signed-off-by: David S. Miller --- drivers/net/bonding/bond_3ad.c | 4 ++++ drivers/net/bonding/bond_alb.c | 4 ++++ drivers/net/bonding/bond_main.c | 4 ++++ 3 files changed, 12 insertions(+) diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index 48cf24ff4e6..c91874d25e5 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -2470,6 +2470,10 @@ int bond_3ad_lacpdu_recv(struct sk_buff *skb, struct net_device *dev, struct pac if (!(dev->flags & IFF_MASTER)) goto out; + skb = skb_share_check(skb, GFP_ATOMIC); + if (!skb) + goto out; + if (!pskb_may_pull(skb, sizeof(struct lacpdu))) goto out; diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c index f4e638c6512..5c6fba802f2 100644 --- a/drivers/net/bonding/bond_alb.c +++ b/drivers/net/bonding/bond_alb.c @@ -326,6 +326,10 @@ static int rlb_arp_recv(struct sk_buff *skb, struct net_device *bond_dev, struct goto out; } + skb = skb_share_check(skb, GFP_ATOMIC); + if (!skb) + goto out; + if (!pskb_may_pull(skb, arp_hdr_len(bond_dev))) goto out; diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index b1025b85acf..163e0b06eaa 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2733,6 +2733,10 @@ static int bond_arp_rcv(struct sk_buff *skb, struct net_device *dev, struct pack if (!slave || !slave_do_arp_validate(bond, slave)) goto out_unlock; + skb = skb_share_check(skb, GFP_ATOMIC); + if (!skb) + goto out_unlock; + if (!pskb_may_pull(skb, arp_hdr_len(dev))) goto out_unlock; -- cgit v1.2.3-18-g5258 From 9190b3b3208d052d98cb601fcc192f3f71a5658b Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 20 Jan 2011 23:31:33 -0800 Subject: net_sched: accurate bytes/packets stats/rates In commit 44b8288308ac9d (net_sched: pfifo_head_drop problem), we fixed a problem with pfifo_head drops that incorrectly decreased sch->bstats.bytes and sch->bstats.packets Several qdiscs (CHOKe, SFQ, pfifo_head, ...) are able to drop a previously enqueued packet, and bstats cannot be changed, so bstats/rates are not accurate (over estimated) This patch changes the qdisc_bstats updates to be done at dequeue() time instead of enqueue() time. bstats counters no longer account for dropped frames, and rates are more correct, since enqueue() bursts dont have effect on dequeue() rate. Signed-off-by: Eric Dumazet Acked-by: Stephen Hemminger Signed-off-by: David S. Miller --- include/net/sch_generic.h | 8 +++++--- net/sched/sch_cbq.c | 3 +-- net/sched/sch_drr.c | 2 +- net/sched/sch_dsmark.c | 2 +- net/sched/sch_fifo.c | 5 +---- net/sched/sch_hfsc.c | 2 +- net/sched/sch_htb.c | 12 +++++------- net/sched/sch_multiq.c | 2 +- net/sched/sch_netem.c | 3 +-- net/sched/sch_prio.c | 2 +- net/sched/sch_red.c | 11 ++++++----- net/sched/sch_sfq.c | 5 ++--- net/sched/sch_tbf.c | 2 +- net/sched/sch_teql.c | 3 ++- 14 files changed, 29 insertions(+), 33 deletions(-) diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h index e9eee99d8b1..160a407c196 100644 --- a/include/net/sch_generic.h +++ b/include/net/sch_generic.h @@ -445,7 +445,6 @@ static inline int __qdisc_enqueue_tail(struct sk_buff *skb, struct Qdisc *sch, { __skb_queue_tail(list, skb); sch->qstats.backlog += qdisc_pkt_len(skb); - qdisc_bstats_update(sch, skb); return NET_XMIT_SUCCESS; } @@ -460,8 +459,10 @@ static inline struct sk_buff *__qdisc_dequeue_head(struct Qdisc *sch, { struct sk_buff *skb = __skb_dequeue(list); - if (likely(skb != NULL)) + if (likely(skb != NULL)) { sch->qstats.backlog -= qdisc_pkt_len(skb); + qdisc_bstats_update(sch, skb); + } return skb; } @@ -474,10 +475,11 @@ static inline struct sk_buff *qdisc_dequeue_head(struct Qdisc *sch) static inline unsigned int __qdisc_queue_drop_head(struct Qdisc *sch, struct sk_buff_head *list) { - struct sk_buff *skb = __qdisc_dequeue_head(sch, list); + struct sk_buff *skb = __skb_dequeue(list); if (likely(skb != NULL)) { unsigned int len = qdisc_pkt_len(skb); + sch->qstats.backlog -= len; kfree_skb(skb); return len; } diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c index c80d1c210c5..5f63ec58942 100644 --- a/net/sched/sch_cbq.c +++ b/net/sched/sch_cbq.c @@ -390,7 +390,6 @@ cbq_enqueue(struct sk_buff *skb, struct Qdisc *sch) ret = qdisc_enqueue(skb, cl->q); if (ret == NET_XMIT_SUCCESS) { sch->q.qlen++; - qdisc_bstats_update(sch, skb); cbq_mark_toplevel(q, cl); if (!cl->next_alive) cbq_activate_class(cl); @@ -649,7 +648,6 @@ static int cbq_reshape_fail(struct sk_buff *skb, struct Qdisc *child) ret = qdisc_enqueue(skb, cl->q); if (ret == NET_XMIT_SUCCESS) { sch->q.qlen++; - qdisc_bstats_update(sch, skb); if (!cl->next_alive) cbq_activate_class(cl); return 0; @@ -971,6 +969,7 @@ cbq_dequeue(struct Qdisc *sch) skb = cbq_dequeue_1(sch); if (skb) { + qdisc_bstats_update(sch, skb); sch->q.qlen--; sch->flags &= ~TCQ_F_THROTTLED; return skb; diff --git a/net/sched/sch_drr.c b/net/sched/sch_drr.c index de55e642eaf..6b7fe4a84f1 100644 --- a/net/sched/sch_drr.c +++ b/net/sched/sch_drr.c @@ -376,7 +376,6 @@ static int drr_enqueue(struct sk_buff *skb, struct Qdisc *sch) } bstats_update(&cl->bstats, skb); - qdisc_bstats_update(sch, skb); sch->q.qlen++; return err; @@ -403,6 +402,7 @@ static struct sk_buff *drr_dequeue(struct Qdisc *sch) skb = qdisc_dequeue_peeked(cl->qdisc); if (cl->qdisc->q.qlen == 0) list_del(&cl->alist); + qdisc_bstats_update(sch, skb); sch->q.qlen--; return skb; } diff --git a/net/sched/sch_dsmark.c b/net/sched/sch_dsmark.c index 60f4bdd4408..0f7bf3fdfea 100644 --- a/net/sched/sch_dsmark.c +++ b/net/sched/sch_dsmark.c @@ -260,7 +260,6 @@ static int dsmark_enqueue(struct sk_buff *skb, struct Qdisc *sch) return err; } - qdisc_bstats_update(sch, skb); sch->q.qlen++; return NET_XMIT_SUCCESS; @@ -283,6 +282,7 @@ static struct sk_buff *dsmark_dequeue(struct Qdisc *sch) if (skb == NULL) return NULL; + qdisc_bstats_update(sch, skb); sch->q.qlen--; index = skb->tc_index & (p->indices - 1); diff --git a/net/sched/sch_fifo.c b/net/sched/sch_fifo.c index aa4d6337e43..d468b479aa9 100644 --- a/net/sched/sch_fifo.c +++ b/net/sched/sch_fifo.c @@ -46,17 +46,14 @@ static int pfifo_enqueue(struct sk_buff *skb, struct Qdisc* sch) static int pfifo_tail_enqueue(struct sk_buff *skb, struct Qdisc* sch) { - struct sk_buff *skb_head; struct fifo_sched_data *q = qdisc_priv(sch); if (likely(skb_queue_len(&sch->q) < q->limit)) return qdisc_enqueue_tail(skb, sch); /* queue full, remove one skb to fulfill the limit */ - skb_head = qdisc_dequeue_head(sch); + __qdisc_queue_drop_head(sch, &sch->q); sch->qstats.drops++; - kfree_skb(skb_head); - qdisc_enqueue_tail(skb, sch); return NET_XMIT_CN; diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c index 2e45791d4f6..14a799de1c3 100644 --- a/net/sched/sch_hfsc.c +++ b/net/sched/sch_hfsc.c @@ -1600,7 +1600,6 @@ hfsc_enqueue(struct sk_buff *skb, struct Qdisc *sch) set_active(cl, qdisc_pkt_len(skb)); bstats_update(&cl->bstats, skb); - qdisc_bstats_update(sch, skb); sch->q.qlen++; return NET_XMIT_SUCCESS; @@ -1666,6 +1665,7 @@ hfsc_dequeue(struct Qdisc *sch) } sch->flags &= ~TCQ_F_THROTTLED; + qdisc_bstats_update(sch, skb); sch->q.qlen--; return skb; diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c index 984c1b0c683..fc12fe6f559 100644 --- a/net/sched/sch_htb.c +++ b/net/sched/sch_htb.c @@ -574,7 +574,6 @@ static int htb_enqueue(struct sk_buff *skb, struct Qdisc *sch) } sch->q.qlen++; - qdisc_bstats_update(sch, skb); return NET_XMIT_SUCCESS; } @@ -842,7 +841,7 @@ next: static struct sk_buff *htb_dequeue(struct Qdisc *sch) { - struct sk_buff *skb = NULL; + struct sk_buff *skb; struct htb_sched *q = qdisc_priv(sch); int level; psched_time_t next_event; @@ -851,6 +850,8 @@ static struct sk_buff *htb_dequeue(struct Qdisc *sch) /* try to dequeue direct packets as high prio (!) to minimize cpu work */ skb = __skb_dequeue(&q->direct_queue); if (skb != NULL) { +ok: + qdisc_bstats_update(sch, skb); sch->flags &= ~TCQ_F_THROTTLED; sch->q.qlen--; return skb; @@ -884,11 +885,8 @@ static struct sk_buff *htb_dequeue(struct Qdisc *sch) int prio = ffz(m); m |= 1 << prio; skb = htb_dequeue_tree(q, prio, level); - if (likely(skb != NULL)) { - sch->q.qlen--; - sch->flags &= ~TCQ_F_THROTTLED; - goto fin; - } + if (likely(skb != NULL)) + goto ok; } } sch->qstats.overlimits++; diff --git a/net/sched/sch_multiq.c b/net/sched/sch_multiq.c index 21f13da2476..436a2e75b32 100644 --- a/net/sched/sch_multiq.c +++ b/net/sched/sch_multiq.c @@ -83,7 +83,6 @@ multiq_enqueue(struct sk_buff *skb, struct Qdisc *sch) ret = qdisc_enqueue(skb, qdisc); if (ret == NET_XMIT_SUCCESS) { - qdisc_bstats_update(sch, skb); sch->q.qlen++; return NET_XMIT_SUCCESS; } @@ -112,6 +111,7 @@ static struct sk_buff *multiq_dequeue(struct Qdisc *sch) qdisc = q->queues[q->curband]; skb = qdisc->dequeue(qdisc); if (skb) { + qdisc_bstats_update(sch, skb); sch->q.qlen--; return skb; } diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c index 1c4bce86347..6a3006b38dc 100644 --- a/net/sched/sch_netem.c +++ b/net/sched/sch_netem.c @@ -240,7 +240,6 @@ static int netem_enqueue(struct sk_buff *skb, struct Qdisc *sch) if (likely(ret == NET_XMIT_SUCCESS)) { sch->q.qlen++; - qdisc_bstats_update(sch, skb); } else if (net_xmit_drop_count(ret)) { sch->qstats.drops++; } @@ -289,6 +288,7 @@ static struct sk_buff *netem_dequeue(struct Qdisc *sch) skb->tstamp.tv64 = 0; #endif pr_debug("netem_dequeue: return skb=%p\n", skb); + qdisc_bstats_update(sch, skb); sch->q.qlen--; return skb; } @@ -476,7 +476,6 @@ static int tfifo_enqueue(struct sk_buff *nskb, struct Qdisc *sch) __skb_queue_after(list, skb, nskb); sch->qstats.backlog += qdisc_pkt_len(nskb); - qdisc_bstats_update(sch, nskb); return NET_XMIT_SUCCESS; } diff --git a/net/sched/sch_prio.c b/net/sched/sch_prio.c index 966158d49dd..fbd710d619b 100644 --- a/net/sched/sch_prio.c +++ b/net/sched/sch_prio.c @@ -84,7 +84,6 @@ prio_enqueue(struct sk_buff *skb, struct Qdisc *sch) ret = qdisc_enqueue(skb, qdisc); if (ret == NET_XMIT_SUCCESS) { - qdisc_bstats_update(sch, skb); sch->q.qlen++; return NET_XMIT_SUCCESS; } @@ -116,6 +115,7 @@ static struct sk_buff *prio_dequeue(struct Qdisc* sch) struct Qdisc *qdisc = q->queues[prio]; struct sk_buff *skb = qdisc->dequeue(qdisc); if (skb) { + qdisc_bstats_update(sch, skb); sch->q.qlen--; return skb; } diff --git a/net/sched/sch_red.c b/net/sched/sch_red.c index a6009c5a2c9..9f98dbd32d4 100644 --- a/net/sched/sch_red.c +++ b/net/sched/sch_red.c @@ -94,7 +94,6 @@ static int red_enqueue(struct sk_buff *skb, struct Qdisc* sch) ret = qdisc_enqueue(skb, child); if (likely(ret == NET_XMIT_SUCCESS)) { - qdisc_bstats_update(sch, skb); sch->q.qlen++; } else if (net_xmit_drop_count(ret)) { q->stats.pdrop++; @@ -114,11 +113,13 @@ static struct sk_buff * red_dequeue(struct Qdisc* sch) struct Qdisc *child = q->qdisc; skb = child->dequeue(child); - if (skb) + if (skb) { + qdisc_bstats_update(sch, skb); sch->q.qlen--; - else if (!red_is_idling(&q->parms)) - red_start_of_idle_period(&q->parms); - + } else { + if (!red_is_idling(&q->parms)) + red_start_of_idle_period(&q->parms); + } return skb; } diff --git a/net/sched/sch_sfq.c b/net/sched/sch_sfq.c index 239ec53a634..edea8cefec6 100644 --- a/net/sched/sch_sfq.c +++ b/net/sched/sch_sfq.c @@ -402,10 +402,8 @@ sfq_enqueue(struct sk_buff *skb, struct Qdisc *sch) q->tail = slot; slot->allot = q->scaled_quantum; } - if (++sch->q.qlen <= q->limit) { - qdisc_bstats_update(sch, skb); + if (++sch->q.qlen <= q->limit) return NET_XMIT_SUCCESS; - } sfq_drop(sch); return NET_XMIT_CN; @@ -445,6 +443,7 @@ next_slot: } skb = slot_dequeue_head(slot); sfq_dec(q, a); + qdisc_bstats_update(sch, skb); sch->q.qlen--; sch->qstats.backlog -= qdisc_pkt_len(skb); diff --git a/net/sched/sch_tbf.c b/net/sched/sch_tbf.c index 77565e72181..e93165820c3 100644 --- a/net/sched/sch_tbf.c +++ b/net/sched/sch_tbf.c @@ -134,7 +134,6 @@ static int tbf_enqueue(struct sk_buff *skb, struct Qdisc* sch) } sch->q.qlen++; - qdisc_bstats_update(sch, skb); return NET_XMIT_SUCCESS; } @@ -187,6 +186,7 @@ static struct sk_buff *tbf_dequeue(struct Qdisc* sch) q->ptokens = ptoks; sch->q.qlen--; sch->flags &= ~TCQ_F_THROTTLED; + qdisc_bstats_update(sch, skb); return skb; } diff --git a/net/sched/sch_teql.c b/net/sched/sch_teql.c index 84ce48eadff..d84e7329660 100644 --- a/net/sched/sch_teql.c +++ b/net/sched/sch_teql.c @@ -87,7 +87,6 @@ teql_enqueue(struct sk_buff *skb, struct Qdisc* sch) if (q->q.qlen < dev->tx_queue_len) { __skb_queue_tail(&q->q, skb); - qdisc_bstats_update(sch, skb); return NET_XMIT_SUCCESS; } @@ -111,6 +110,8 @@ teql_dequeue(struct Qdisc* sch) dat->m->slaves = sch; netif_wake_queue(m); } + } else { + qdisc_bstats_update(sch, skb); } sch->q.qlen = dat->q.qlen + dat_queue->qdisc->q.qlen; return skb; -- cgit v1.2.3-18-g5258 From 8a6afb9a950de01457a4267bcbe3292e56412326 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 21 Jan 2011 16:56:47 +0100 Subject: spi/spi_sh_msiof: fix wrong address calculation, which leads to an Oops NULL + != NULL, but reading from that address is usually not a very good idea and often leads to problems, like kernel Oopses in this case, easily reproducible by writing to an SD-card, used in SPI mode. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Grant Likely --- drivers/spi/spi_sh_msiof.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi_sh_msiof.c b/drivers/spi/spi_sh_msiof.c index 56f60c8ea0a..2c665fceaac 100644 --- a/drivers/spi/spi_sh_msiof.c +++ b/drivers/spi/spi_sh_msiof.c @@ -509,9 +509,11 @@ static int sh_msiof_spi_txrx(struct spi_device *spi, struct spi_transfer *t) bytes_done = 0; while (bytes_done < t->len) { + void *rx_buf = t->rx_buf ? t->rx_buf + bytes_done : NULL; + const void *tx_buf = t->tx_buf ? t->tx_buf + bytes_done : NULL; n = sh_msiof_spi_txrx_once(p, tx_fifo, rx_fifo, - t->tx_buf + bytes_done, - t->rx_buf + bytes_done, + tx_buf, + rx_buf, words, bits); if (n < 0) break; -- cgit v1.2.3-18-g5258 From dc5a460a1bfa44273653700e33d4e7051194cbfd Mon Sep 17 00:00:00 2001 From: "Rajashekhara, Sudhakar" Date: Fri, 21 Jan 2011 20:10:01 +0530 Subject: ASoC: da8xx/omap-l1xx: match codec_name with i2c ids The codec_name entry for da8xx evm in sound/soc/davinci/davinci-evm.c is not matching with the i2c ids in the board file. Without this fix the soundcard does not get detected on da850/omap-l138/am18x evm. Signed-off-by: Rajashekhara, Sudhakar Tested-by: Dan Sharon Acked-by: Liam Girdwood Signed-off-by: Mark Brown Cc: stable@kernel.org (for 2.6.37) --- sound/soc/davinci/davinci-evm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/davinci/davinci-evm.c b/sound/soc/davinci/davinci-evm.c index 0c2d6bacc68..b36f0b39b09 100644 --- a/sound/soc/davinci/davinci-evm.c +++ b/sound/soc/davinci/davinci-evm.c @@ -223,7 +223,7 @@ static struct snd_soc_dai_link da8xx_evm_dai = { .stream_name = "AIC3X", .cpu_dai_name= "davinci-mcasp.0", .codec_dai_name = "tlv320aic3x-hifi", - .codec_name = "tlv320aic3x-codec.0-001a", + .codec_name = "tlv320aic3x-codec.1-0018", .platform_name = "davinci-pcm-audio", .init = evm_aic3x_init, .ops = &evm_ops, -- cgit v1.2.3-18-g5258 From 20a4e7fc7e213365ea3771d7bf1e10a6bab853be Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 21 Jan 2011 12:47:33 +0000 Subject: ASoC: Handle low measured DC offsets for wm_hubs devices The DC servo codes are actually signed numbers so need to be treated as such. Signed-off-by: Mark Brown Acked-by: Liam Girdwood Cc: stable@kernel.org --- sound/soc/codecs/wm_hubs.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c index c466982eed2..613df5db0b3 100644 --- a/sound/soc/codecs/wm_hubs.c +++ b/sound/soc/codecs/wm_hubs.c @@ -91,6 +91,7 @@ static void wait_for_dc_servo(struct snd_soc_codec *codec, unsigned int op) static void calibrate_dc_servo(struct snd_soc_codec *codec) { struct wm_hubs_data *hubs = snd_soc_codec_get_drvdata(codec); + s8 offset; u16 reg, reg_l, reg_r, dcs_cfg; /* If we're using a digital only path and have a previously @@ -149,16 +150,14 @@ static void calibrate_dc_servo(struct snd_soc_codec *codec) hubs->dcs_codes); /* HPOUT1L */ - if (reg_l + hubs->dcs_codes > 0 && - reg_l + hubs->dcs_codes < 0xff) - reg_l += hubs->dcs_codes; - dcs_cfg = reg_l << WM8993_DCS_DAC_WR_VAL_1_SHIFT; + offset = reg_l; + offset += hubs->dcs_codes; + dcs_cfg = (u8)offset << WM8993_DCS_DAC_WR_VAL_1_SHIFT; /* HPOUT1R */ - if (reg_r + hubs->dcs_codes > 0 && - reg_r + hubs->dcs_codes < 0xff) - reg_r += hubs->dcs_codes; - dcs_cfg |= reg_r; + offset = reg_r; + offset += hubs->dcs_codes; + dcs_cfg |= (u8)offset; dev_dbg(codec->dev, "DCS result: %x\n", dcs_cfg); -- cgit v1.2.3-18-g5258 From 239712ebb2b4750431980d33993ea05c6ac7ff65 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Thu, 20 Jan 2011 08:08:04 -0800 Subject: iwlwifi: don't read sku information from EEPROM for 4965 For all the new devices, the sku information should read from EEPROM but for legacy devices such as 4965, appearly the EEPROM does not contain the necessary information. so skip the read from EEPROM and go back to use software configuration. Reported-by: Helmut Schaa Signed-off-by: Wey-Yi Guy Tested-by: Helmut Schaa Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-4965.c | 1 + drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c | 11 +++++++---- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 3f1e5f1bf84..91a9f525346 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -2624,6 +2624,7 @@ struct iwl_cfg iwl4965_agn_cfg = { .fw_name_pre = IWL4965_FW_PRE, .ucode_api_max = IWL4965_UCODE_API_MAX, .ucode_api_min = IWL4965_UCODE_API_MIN, + .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N, .valid_tx_ant = ANT_AB, .valid_rx_ant = ANT_ABC, .eeprom_ver = EEPROM_4965_EEPROM_VERSION, diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c index 14ceb4df72f..27b5a3eec9d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c @@ -152,11 +152,14 @@ int iwl_eeprom_check_sku(struct iwl_priv *priv) eeprom_sku = iwl_eeprom_query16(priv, EEPROM_SKU_CAP); - priv->cfg->sku = ((eeprom_sku & EEPROM_SKU_CAP_BAND_SELECTION) >> + if (!priv->cfg->sku) { + /* not using sku overwrite */ + priv->cfg->sku = + ((eeprom_sku & EEPROM_SKU_CAP_BAND_SELECTION) >> EEPROM_SKU_CAP_BAND_POS); - if (eeprom_sku & EEPROM_SKU_CAP_11N_ENABLE) - priv->cfg->sku |= IWL_SKU_N; - + if (eeprom_sku & EEPROM_SKU_CAP_11N_ENABLE) + priv->cfg->sku |= IWL_SKU_N; + } if (!priv->cfg->sku) { IWL_ERR(priv, "Invalid device sku\n"); return -EINVAL; -- cgit v1.2.3-18-g5258 From 6f4810101a629b31b5427872a09ea092cfc5c4bd Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 20 Jan 2011 17:47:39 -0800 Subject: ath9k_hw: disabled PAPRD for AR9003 AR9003's PAPRD was enabled prematurely, and is causing some large discrepancies on throughput and network connectivity. For example downlink (RX) throughput against an AR9280 AP can vary widlely from 43-73 Mbit/s while disabling this gets AR9382 (2x2) up to around 93 Mbit/s in a 2.4 GHz HT20 setup. Cc: stable@kernel.org Cc: Paul Shaw Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 6 +++++- drivers/net/wireless/ath/ath9k/hw.h | 1 + 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 1afb8bb8575..9f01e50d5cd 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -369,6 +369,9 @@ static void ath9k_hw_init_config(struct ath_hw *ah) else ah->config.ht_enable = 0; + /* PAPRD needs some more work to be enabled */ + ah->config.paprd_disable = 1; + ah->config.rx_intr_mitigation = true; ah->config.pcieSerDesWrite = true; @@ -1933,7 +1936,8 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah) pCap->rx_status_len = sizeof(struct ar9003_rxs); pCap->tx_desc_len = sizeof(struct ar9003_txc); pCap->txs_len = sizeof(struct ar9003_txs); - if (ah->eep_ops->get_eeprom(ah, EEP_PAPRD)) + if (!ah->config.paprd_disable && + ah->eep_ops->get_eeprom(ah, EEP_PAPRD)) pCap->hw_caps |= ATH9K_HW_CAP_PAPRD; } else { pCap->tx_desc_len = sizeof(struct ath_desc); diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 5a3dfec45e9..ea9fde67064 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -225,6 +225,7 @@ struct ath9k_ops_config { u32 pcie_waen; u8 analog_shiftreg; u8 ht_enable; + u8 paprd_disable; u32 ofdm_trig_low; u32 ofdm_trig_high; u32 cck_trig_high; -- cgit v1.2.3-18-g5258 From 783cd01e140d9db5c2d2279a96b81e16f9d81fef Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 21 Jan 2011 18:52:38 +0100 Subject: ath9k: add missing ps wakeup/restore calls There are several places where ath_reset() was called without proper calls to ath9k_ps_wakeup/ath9k_ps_restore. To fix this, add those calls directly to ath_reset and drop them from callers where it makes sense. Also add them to the config callback around ath_update_txpow to fix a crash that happens when the tx power changed before any vif is brought up. Signed-off-by: Felix Fietkau Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 8 +++++--- drivers/net/wireless/ath/ath9k/xmit.c | 2 -- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index f90a6ca94a7..c79c97be6cd 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -592,14 +592,12 @@ void ath9k_tasklet(unsigned long data) u32 status = sc->intrstatus; u32 rxmask; - ath9k_ps_wakeup(sc); - if (status & ATH9K_INT_FATAL) { ath_reset(sc, true); - ath9k_ps_restore(sc); return; } + ath9k_ps_wakeup(sc); spin_lock(&sc->sc_pcu_lock); if (!ath9k_hw_check_alive(ah)) @@ -969,6 +967,7 @@ int ath_reset(struct ath_softc *sc, bool retry_tx) /* Stop ANI */ del_timer_sync(&common->ani.timer); + ath9k_ps_wakeup(sc); spin_lock_bh(&sc->sc_pcu_lock); ieee80211_stop_queues(hw); @@ -1015,6 +1014,7 @@ int ath_reset(struct ath_softc *sc, bool retry_tx) /* Start ANI */ ath_start_ani(common); + ath9k_ps_restore(sc); return r; } @@ -1701,7 +1701,9 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed) skip_chan_change: if (changed & IEEE80211_CONF_CHANGE_POWER) { sc->config.txpowlimit = 2 * conf->power_level; + ath9k_ps_wakeup(sc); ath_update_txpow(sc); + ath9k_ps_restore(sc); } spin_lock_bh(&sc->wiphy_lock); diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 332d1feb5c1..33a37edbaf7 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -2113,9 +2113,7 @@ static void ath_tx_complete_poll_work(struct work_struct *work) if (needreset) { ath_dbg(ath9k_hw_common(sc->sc_ah), ATH_DBG_RESET, "tx hung, resetting the chip\n"); - ath9k_ps_wakeup(sc); ath_reset(sc, true); - ath9k_ps_restore(sc); } ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, -- cgit v1.2.3-18-g5258 From bdc4bf652bc0271ba8f1f25bbd3dbac90bead44e Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Fri, 21 Jan 2011 13:40:54 -0600 Subject: rtlwifi: Fix possible NULL dereference In drivers/net/wireless/rtlwifi/pci.c::_rtl_pci_rx_interrupt() we call dev_alloc_skb(), which may fail and return NULL, but we do not check the returned value against NULL before dereferencing the returned pointer. This may lead to a NULL pointer dereference which means we'll crash - not good. In a separate call to dev_alloc_skb(), the debug level is changed so that the failure message will always be logged. Signed-off-by: Jesper Juhl Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/pci.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index 0fa36aa6701..1758d446324 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -619,6 +619,13 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw) struct sk_buff *uskb = NULL; u8 *pdata; uskb = dev_alloc_skb(skb->len + 128); + if (!uskb) { + RT_TRACE(rtlpriv, + (COMP_INTR | COMP_RECV), + DBG_EMERG, + ("can't alloc rx skb\n")); + goto done; + } memcpy(IEEE80211_SKB_RXCB(uskb), &rx_status, sizeof(rx_status)); @@ -641,7 +648,7 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw) new_skb = dev_alloc_skb(rtlpci->rxbuffersize); if (unlikely(!new_skb)) { RT_TRACE(rtlpriv, (COMP_INTR | COMP_RECV), - DBG_DMESG, + DBG_EMERG, ("can't alloc skb for rx\n")); goto done; } @@ -1066,9 +1073,9 @@ static int _rtl_pci_init_rx_ring(struct ieee80211_hw *hw) struct sk_buff *skb = dev_alloc_skb(rtlpci->rxbuffersize); u32 bufferaddress; - entry = &rtlpci->rx_ring[rx_queue_idx].desc[i]; if (!skb) return 0; + entry = &rtlpci->rx_ring[rx_queue_idx].desc[i]; /*skb->dev = dev; */ -- cgit v1.2.3-18-g5258 From 2221eca0a2c0f7f9918efdcaa52fb8e1adff991f Mon Sep 17 00:00:00 2001 From: Vasiliy Kulikov Date: Fri, 21 Jan 2011 16:24:23 -0800 Subject: atm: idt77105: fix fetch_stats() result copy_to_user() used PRIV(dev)->stats instead of local stats variable. Zero stats were returned to user in case of (zero != 0), also memcpy() was pointless. Signed-off-by: Vasiliy Kulikov Signed-off-by: David S. Miller --- drivers/atm/idt77105.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/atm/idt77105.c b/drivers/atm/idt77105.c index bca9cb89a11..487a5473985 100644 --- a/drivers/atm/idt77105.c +++ b/drivers/atm/idt77105.c @@ -151,7 +151,7 @@ static int fetch_stats(struct atm_dev *dev,struct idt77105_stats __user *arg,int spin_unlock_irqrestore(&idt77105_priv_lock, flags); if (arg == NULL) return 0; - return copy_to_user(arg, &PRIV(dev)->stats, + return copy_to_user(arg, &stats, sizeof(struct idt77105_stats)) ? -EFAULT : 0; } -- cgit v1.2.3-18-g5258 From 03fd3cf5a179da12e6bee5e9d74b648aff68dc4c Mon Sep 17 00:00:00 2001 From: Kurt Van Dijck Date: Tue, 11 Jan 2011 04:32:31 +0000 Subject: can: add driver for Softing card This patch adds a driver for the platform:softing device. This will create (up to) 2 CAN network devices from 1 platform:softing device Signed-off-by: Kurt Van Dijck Acked-by: Wolfgang Grandegger Signed-off-by: David S. Miller --- drivers/net/can/Kconfig | 2 + drivers/net/can/Makefile | 1 + drivers/net/can/softing/Kconfig | 16 + drivers/net/can/softing/Makefile | 5 + drivers/net/can/softing/softing.h | 167 ++++++ drivers/net/can/softing/softing_fw.c | 691 ++++++++++++++++++++++ drivers/net/can/softing/softing_main.c | 893 +++++++++++++++++++++++++++++ drivers/net/can/softing/softing_platform.h | 40 ++ 8 files changed, 1815 insertions(+) create mode 100644 drivers/net/can/softing/Kconfig create mode 100644 drivers/net/can/softing/Makefile create mode 100644 drivers/net/can/softing/softing.h create mode 100644 drivers/net/can/softing/softing_fw.c create mode 100644 drivers/net/can/softing/softing_main.c create mode 100644 drivers/net/can/softing/softing_platform.h diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index d5a9db60ade..986195eaa57 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -117,6 +117,8 @@ source "drivers/net/can/sja1000/Kconfig" source "drivers/net/can/usb/Kconfig" +source "drivers/net/can/softing/Kconfig" + config CAN_DEBUG_DEVICES bool "CAN devices debugging messages" depends on CAN diff --git a/drivers/net/can/Makefile b/drivers/net/can/Makefile index 07ca159ba3f..53c82a71778 100644 --- a/drivers/net/can/Makefile +++ b/drivers/net/can/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_CAN_DEV) += can-dev.o can-dev-y := dev.o obj-y += usb/ +obj-y += softing/ obj-$(CONFIG_CAN_SJA1000) += sja1000/ obj-$(CONFIG_CAN_MSCAN) += mscan/ diff --git a/drivers/net/can/softing/Kconfig b/drivers/net/can/softing/Kconfig new file mode 100644 index 00000000000..072f337f42e --- /dev/null +++ b/drivers/net/can/softing/Kconfig @@ -0,0 +1,16 @@ +config CAN_SOFTING + tristate "Softing Gmbh CAN generic support" + depends on CAN_DEV + ---help--- + Support for CAN cards from Softing Gmbh & some cards + from Vector Gmbh. + Softing Gmbh CAN cards come with 1 or 2 physical busses. + Those cards typically use Dual Port RAM to communicate + with the host CPU. The interface is then identical for PCI + and PCMCIA cards. This driver operates on a platform device, + which has been created by softing_cs or softing_pci driver. + Warning: + The API of the card does not allow fine control per bus, but + controls the 2 busses on the card together. + As such, some actions (start/stop/busoff recovery) on 1 bus + must bring down the other bus too temporarily. diff --git a/drivers/net/can/softing/Makefile b/drivers/net/can/softing/Makefile new file mode 100644 index 00000000000..7db04452deb --- /dev/null +++ b/drivers/net/can/softing/Makefile @@ -0,0 +1,5 @@ + +softing-y := softing_main.o softing_fw.o +obj-$(CONFIG_CAN_SOFTING) += softing.o + +ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG diff --git a/drivers/net/can/softing/softing.h b/drivers/net/can/softing/softing.h new file mode 100644 index 00000000000..7ec9f4db3d5 --- /dev/null +++ b/drivers/net/can/softing/softing.h @@ -0,0 +1,167 @@ +/* + * softing common interfaces + * + * by Kurt Van Dijck, 2008-2010 + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "softing_platform.h" + +struct softing; + +struct softing_priv { + struct can_priv can; /* must be the first member! */ + struct net_device *netdev; + struct softing *card; + struct { + int pending; + /* variables wich hold the circular buffer */ + int echo_put; + int echo_get; + } tx; + struct can_bittiming_const btr_const; + int index; + uint8_t output; + uint16_t chip; +}; +#define netdev2softing(netdev) ((struct softing_priv *)netdev_priv(netdev)) + +struct softing { + const struct softing_platform_data *pdat; + struct platform_device *pdev; + struct net_device *net[2]; + spinlock_t spin; /* protect this structure & DPRAM access */ + ktime_t ts_ref; + ktime_t ts_overflow; /* timestamp overflow value, in ktime */ + + struct { + /* indication of firmware status */ + int up; + /* protection of the 'up' variable */ + struct mutex lock; + } fw; + struct { + int nr; + int requested; + int svc_count; + unsigned int dpram_position; + } irq; + struct { + int pending; + int last_bus; + /* + * keep the bus that last tx'd a message, + * in order to let every netdev queue resume + */ + } tx; + __iomem uint8_t *dpram; + unsigned long dpram_phys; + unsigned long dpram_size; + struct { + uint16_t fw_version, hw_version, license, serial; + uint16_t chip[2]; + unsigned int freq; /* remote cpu's operating frequency */ + } id; +}; + +extern int softing_default_output(struct net_device *netdev); + +extern ktime_t softing_raw2ktime(struct softing *card, u32 raw); + +extern int softing_chip_poweron(struct softing *card); + +extern int softing_bootloader_command(struct softing *card, int16_t cmd, + const char *msg); + +/* Load firmware after reset */ +extern int softing_load_fw(const char *file, struct softing *card, + __iomem uint8_t *virt, unsigned int size, int offset); + +/* Load final application firmware after bootloader */ +extern int softing_load_app_fw(const char *file, struct softing *card); + +/* + * enable or disable irq + * only called with fw.lock locked + */ +extern int softing_enable_irq(struct softing *card, int enable); + +/* start/stop 1 bus on card */ +extern int softing_startstop(struct net_device *netdev, int up); + +/* netif_rx() */ +extern int softing_netdev_rx(struct net_device *netdev, + const struct can_frame *msg, ktime_t ktime); + +/* SOFTING DPRAM mappings */ +#define DPRAM_RX 0x0000 + #define DPRAM_RX_SIZE 32 + #define DPRAM_RX_CNT 16 +#define DPRAM_RX_RD 0x0201 /* uint8_t */ +#define DPRAM_RX_WR 0x0205 /* uint8_t */ +#define DPRAM_RX_LOST 0x0207 /* uint8_t */ + +#define DPRAM_FCT_PARAM 0x0300 /* int16_t [20] */ +#define DPRAM_FCT_RESULT 0x0328 /* int16_t */ +#define DPRAM_FCT_HOST 0x032b /* uint16_t */ + +#define DPRAM_INFO_BUSSTATE 0x0331 /* uint16_t */ +#define DPRAM_INFO_BUSSTATE2 0x0335 /* uint16_t */ +#define DPRAM_INFO_ERRSTATE 0x0339 /* uint16_t */ +#define DPRAM_INFO_ERRSTATE2 0x033d /* uint16_t */ +#define DPRAM_RESET 0x0341 /* uint16_t */ +#define DPRAM_CLR_RECV_FIFO 0x0345 /* uint16_t */ +#define DPRAM_RESET_TIME 0x034d /* uint16_t */ +#define DPRAM_TIME 0x0350 /* uint64_t */ +#define DPRAM_WR_START 0x0358 /* uint8_t */ +#define DPRAM_WR_END 0x0359 /* uint8_t */ +#define DPRAM_RESET_RX_FIFO 0x0361 /* uint16_t */ +#define DPRAM_RESET_TX_FIFO 0x0364 /* uint8_t */ +#define DPRAM_READ_FIFO_LEVEL 0x0365 /* uint8_t */ +#define DPRAM_RX_FIFO_LEVEL 0x0366 /* uint16_t */ +#define DPRAM_TX_FIFO_LEVEL 0x0366 /* uint16_t */ + +#define DPRAM_TX 0x0400 /* uint16_t */ + #define DPRAM_TX_SIZE 16 + #define DPRAM_TX_CNT 32 +#define DPRAM_TX_RD 0x0601 /* uint8_t */ +#define DPRAM_TX_WR 0x0605 /* uint8_t */ + +#define DPRAM_COMMAND 0x07e0 /* uint16_t */ +#define DPRAM_RECEIPT 0x07f0 /* uint16_t */ +#define DPRAM_IRQ_TOHOST 0x07fe /* uint8_t */ +#define DPRAM_IRQ_TOCARD 0x07ff /* uint8_t */ + +#define DPRAM_V2_RESET 0x0e00 /* uint8_t */ +#define DPRAM_V2_IRQ_TOHOST 0x0e02 /* uint8_t */ + +#define TXMAX (DPRAM_TX_CNT - 1) + +/* DPRAM return codes */ +#define RES_NONE 0 +#define RES_OK 1 +#define RES_NOK 2 +#define RES_UNKNOWN 3 +/* DPRAM flags */ +#define CMD_TX 0x01 +#define CMD_ACK 0x02 +#define CMD_XTD 0x04 +#define CMD_RTR 0x08 +#define CMD_ERR 0x10 +#define CMD_BUS2 0x80 + +/* returned fifo entry bus state masks */ +#define SF_MASK_BUSOFF 0x80 +#define SF_MASK_EPASSIVE 0x60 + +/* bus states */ +#define STATE_BUSOFF 2 +#define STATE_EPASSIVE 1 +#define STATE_EACTIVE 0 diff --git a/drivers/net/can/softing/softing_fw.c b/drivers/net/can/softing/softing_fw.c new file mode 100644 index 00000000000..b520784fb19 --- /dev/null +++ b/drivers/net/can/softing/softing_fw.c @@ -0,0 +1,691 @@ +/* + * Copyright (C) 2008-2010 + * + * - Kurt Van Dijck, EIA Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the version 2 of the GNU General Public License + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include + +#include "softing.h" + +/* + * low level DPRAM command. + * Make sure that card->dpram[DPRAM_FCT_HOST] is preset + */ +static int _softing_fct_cmd(struct softing *card, int16_t cmd, uint16_t vector, + const char *msg) +{ + int ret; + unsigned long stamp; + + iowrite16(cmd, &card->dpram[DPRAM_FCT_PARAM]); + iowrite8(vector >> 8, &card->dpram[DPRAM_FCT_HOST + 1]); + iowrite8(vector, &card->dpram[DPRAM_FCT_HOST]); + /* be sure to flush this to the card */ + wmb(); + stamp = jiffies + 1 * HZ; + /* wait for card */ + do { + /* DPRAM_FCT_HOST is _not_ aligned */ + ret = ioread8(&card->dpram[DPRAM_FCT_HOST]) + + (ioread8(&card->dpram[DPRAM_FCT_HOST + 1]) << 8); + /* don't have any cached variables */ + rmb(); + if (ret == RES_OK) + /* read return-value now */ + return ioread16(&card->dpram[DPRAM_FCT_RESULT]); + + if ((ret != vector) || time_after(jiffies, stamp)) + break; + /* process context => relax */ + usleep_range(500, 10000); + } while (1); + + ret = (ret == RES_NONE) ? -ETIMEDOUT : -ECANCELED; + dev_alert(&card->pdev->dev, "firmware %s failed (%i)\n", msg, ret); + return ret; +} + +static int softing_fct_cmd(struct softing *card, int16_t cmd, const char *msg) +{ + int ret; + + ret = _softing_fct_cmd(card, cmd, 0, msg); + if (ret > 0) { + dev_alert(&card->pdev->dev, "%s returned %u\n", msg, ret); + ret = -EIO; + } + return ret; +} + +int softing_bootloader_command(struct softing *card, int16_t cmd, + const char *msg) +{ + int ret; + unsigned long stamp; + + iowrite16(RES_NONE, &card->dpram[DPRAM_RECEIPT]); + iowrite16(cmd, &card->dpram[DPRAM_COMMAND]); + /* be sure to flush this to the card */ + wmb(); + stamp = jiffies + 3 * HZ; + /* wait for card */ + do { + ret = ioread16(&card->dpram[DPRAM_RECEIPT]); + /* don't have any cached variables */ + rmb(); + if (ret == RES_OK) + return 0; + if (time_after(jiffies, stamp)) + break; + /* process context => relax */ + usleep_range(500, 10000); + } while (!signal_pending(current)); + + ret = (ret == RES_NONE) ? -ETIMEDOUT : -ECANCELED; + dev_alert(&card->pdev->dev, "bootloader %s failed (%i)\n", msg, ret); + return ret; +} + +static int fw_parse(const uint8_t **pmem, uint16_t *ptype, uint32_t *paddr, + uint16_t *plen, const uint8_t **pdat) +{ + uint16_t checksum[2]; + const uint8_t *mem; + const uint8_t *end; + + /* + * firmware records are a binary, unaligned stream composed of: + * uint16_t type; + * uint32_t addr; + * uint16_t len; + * uint8_t dat[len]; + * uint16_t checksum; + * all values in little endian. + * We could define a struct for this, with __attribute__((packed)), + * but would that solve the alignment in _all_ cases (cfr. the + * struct itself may be an odd address)? + * + * I chose to use leXX_to_cpup() since this solves both + * endianness & alignment. + */ + mem = *pmem; + *ptype = le16_to_cpup((void *)&mem[0]); + *paddr = le32_to_cpup((void *)&mem[2]); + *plen = le16_to_cpup((void *)&mem[6]); + *pdat = &mem[8]; + /* verify checksum */ + end = &mem[8 + *plen]; + checksum[0] = le16_to_cpup((void *)end); + for (checksum[1] = 0; mem < end; ++mem) + checksum[1] += *mem; + if (checksum[0] != checksum[1]) + return -EINVAL; + /* increment */ + *pmem += 10 + *plen; + return 0; +} + +int softing_load_fw(const char *file, struct softing *card, + __iomem uint8_t *dpram, unsigned int size, int offset) +{ + const struct firmware *fw; + int ret; + const uint8_t *mem, *end, *dat; + uint16_t type, len; + uint32_t addr; + uint8_t *buf = NULL; + int buflen = 0; + int8_t type_end = 0; + + ret = request_firmware(&fw, file, &card->pdev->dev); + if (ret < 0) + return ret; + dev_dbg(&card->pdev->dev, "%s, firmware(%s) got %u bytes" + ", offset %c0x%04x\n", + card->pdat->name, file, (unsigned int)fw->size, + (offset >= 0) ? '+' : '-', (unsigned int)abs(offset)); + /* parse the firmware */ + mem = fw->data; + end = &mem[fw->size]; + /* look for header record */ + ret = fw_parse(&mem, &type, &addr, &len, &dat); + if (ret < 0) + goto failed; + if (type != 0xffff) + goto failed; + if (strncmp("Structured Binary Format, Softing GmbH" , dat, len)) { + ret = -EINVAL; + goto failed; + } + /* ok, we had a header */ + while (mem < end) { + ret = fw_parse(&mem, &type, &addr, &len, &dat); + if (ret < 0) + goto failed; + if (type == 3) { + /* start address, not used here */ + continue; + } else if (type == 1) { + /* eof */ + type_end = 1; + break; + } else if (type != 0) { + ret = -EINVAL; + goto failed; + } + + if ((addr + len + offset) > size) + goto failed; + memcpy_toio(&dpram[addr + offset], dat, len); + /* be sure to flush caches from IO space */ + mb(); + if (len > buflen) { + /* align buflen */ + buflen = (len + (1024-1)) & ~(1024-1); + buf = krealloc(buf, buflen, GFP_KERNEL); + if (!buf) { + ret = -ENOMEM; + goto failed; + } + } + /* verify record data */ + memcpy_fromio(buf, &dpram[addr + offset], len); + if (memcmp(buf, dat, len)) { + /* is not ok */ + dev_alert(&card->pdev->dev, "DPRAM readback failed\n"); + ret = -EIO; + goto failed; + } + } + if (!type_end) + /* no end record seen */ + goto failed; + ret = 0; +failed: + kfree(buf); + release_firmware(fw); + if (ret < 0) + dev_info(&card->pdev->dev, "firmware %s failed\n", file); + return ret; +} + +int softing_load_app_fw(const char *file, struct softing *card) +{ + const struct firmware *fw; + const uint8_t *mem, *end, *dat; + int ret, j; + uint16_t type, len; + uint32_t addr, start_addr = 0; + unsigned int sum, rx_sum; + int8_t type_end = 0, type_entrypoint = 0; + + ret = request_firmware(&fw, file, &card->pdev->dev); + if (ret) { + dev_alert(&card->pdev->dev, "request_firmware(%s) got %i\n", + file, ret); + return ret; + } + dev_dbg(&card->pdev->dev, "firmware(%s) got %lu bytes\n", + file, (unsigned long)fw->size); + /* parse the firmware */ + mem = fw->data; + end = &mem[fw->size]; + /* look for header record */ + ret = fw_parse(&mem, &type, &addr, &len, &dat); + if (ret) + goto failed; + ret = -EINVAL; + if (type != 0xffff) { + dev_alert(&card->pdev->dev, "firmware starts with type 0x%x\n", + type); + goto failed; + } + if (strncmp("Structured Binary Format, Softing GmbH", dat, len)) { + dev_alert(&card->pdev->dev, "firmware string '%.*s' fault\n", + len, dat); + goto failed; + } + /* ok, we had a header */ + while (mem < end) { + ret = fw_parse(&mem, &type, &addr, &len, &dat); + if (ret) + goto failed; + + if (type == 3) { + /* start address */ + start_addr = addr; + type_entrypoint = 1; + continue; + } else if (type == 1) { + /* eof */ + type_end = 1; + break; + } else if (type != 0) { + dev_alert(&card->pdev->dev, + "unknown record type 0x%04x\n", type); + ret = -EINVAL; + goto failed; + } + + /* regualar data */ + for (sum = 0, j = 0; j < len; ++j) + sum += dat[j]; + /* work in 16bit (target) */ + sum &= 0xffff; + + memcpy_toio(&card->dpram[card->pdat->app.offs], dat, len); + iowrite32(card->pdat->app.offs + card->pdat->app.addr, + &card->dpram[DPRAM_COMMAND + 2]); + iowrite32(addr, &card->dpram[DPRAM_COMMAND + 6]); + iowrite16(len, &card->dpram[DPRAM_COMMAND + 10]); + iowrite8(1, &card->dpram[DPRAM_COMMAND + 12]); + ret = softing_bootloader_command(card, 1, "loading app."); + if (ret < 0) + goto failed; + /* verify checksum */ + rx_sum = ioread16(&card->dpram[DPRAM_RECEIPT + 2]); + if (rx_sum != sum) { + dev_alert(&card->pdev->dev, "SRAM seems to be damaged" + ", wanted 0x%04x, got 0x%04x\n", sum, rx_sum); + ret = -EIO; + goto failed; + } + } + if (!type_end || !type_entrypoint) + goto failed; + /* start application in card */ + iowrite32(start_addr, &card->dpram[DPRAM_COMMAND + 2]); + iowrite8(1, &card->dpram[DPRAM_COMMAND + 6]); + ret = softing_bootloader_command(card, 3, "start app."); + if (ret < 0) + goto failed; + ret = 0; +failed: + release_firmware(fw); + if (ret < 0) + dev_info(&card->pdev->dev, "firmware %s failed\n", file); + return ret; +} + +static int softing_reset_chip(struct softing *card) +{ + int ret; + + do { + /* reset chip */ + iowrite8(0, &card->dpram[DPRAM_RESET_RX_FIFO]); + iowrite8(0, &card->dpram[DPRAM_RESET_RX_FIFO+1]); + iowrite8(1, &card->dpram[DPRAM_RESET]); + iowrite8(0, &card->dpram[DPRAM_RESET+1]); + + ret = softing_fct_cmd(card, 0, "reset_can"); + if (!ret) + break; + if (signal_pending(current)) + /* don't wait any longer */ + break; + } while (1); + card->tx.pending = 0; + return ret; +} + +int softing_chip_poweron(struct softing *card) +{ + int ret; + /* sync */ + ret = _softing_fct_cmd(card, 99, 0x55, "sync-a"); + if (ret < 0) + goto failed; + + ret = _softing_fct_cmd(card, 99, 0xaa, "sync-b"); + if (ret < 0) + goto failed; + + ret = softing_reset_chip(card); + if (ret < 0) + goto failed; + /* get_serial */ + ret = softing_fct_cmd(card, 43, "get_serial_number"); + if (ret < 0) + goto failed; + card->id.serial = ioread32(&card->dpram[DPRAM_FCT_PARAM]); + /* get_version */ + ret = softing_fct_cmd(card, 12, "get_version"); + if (ret < 0) + goto failed; + card->id.fw_version = ioread16(&card->dpram[DPRAM_FCT_PARAM + 2]); + card->id.hw_version = ioread16(&card->dpram[DPRAM_FCT_PARAM + 4]); + card->id.license = ioread16(&card->dpram[DPRAM_FCT_PARAM + 6]); + card->id.chip[0] = ioread16(&card->dpram[DPRAM_FCT_PARAM + 8]); + card->id.chip[1] = ioread16(&card->dpram[DPRAM_FCT_PARAM + 10]); + return 0; +failed: + return ret; +} + +static void softing_initialize_timestamp(struct softing *card) +{ + uint64_t ovf; + + card->ts_ref = ktime_get(); + + /* 16MHz is the reference */ + ovf = 0x100000000ULL * 16; + do_div(ovf, card->pdat->freq ?: 16); + + card->ts_overflow = ktime_add_us(ktime_set(0, 0), ovf); +} + +ktime_t softing_raw2ktime(struct softing *card, u32 raw) +{ + uint64_t rawl; + ktime_t now, real_offset; + ktime_t target; + ktime_t tmp; + + now = ktime_get(); + real_offset = ktime_sub(ktime_get_real(), now); + + /* find nsec from card */ + rawl = raw * 16; + do_div(rawl, card->pdat->freq ?: 16); + target = ktime_add_us(card->ts_ref, rawl); + /* test for overflows */ + tmp = ktime_add(target, card->ts_overflow); + while (unlikely(ktime_to_ns(tmp) > ktime_to_ns(now))) { + card->ts_ref = ktime_add(card->ts_ref, card->ts_overflow); + target = tmp; + tmp = ktime_add(target, card->ts_overflow); + } + return ktime_add(target, real_offset); +} + +static inline int softing_error_reporting(struct net_device *netdev) +{ + struct softing_priv *priv = netdev_priv(netdev); + + return (priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING) + ? 1 : 0; +} + +int softing_startstop(struct net_device *dev, int up) +{ + int ret; + struct softing *card; + struct softing_priv *priv; + struct net_device *netdev; + int bus_bitmask_start; + int j, error_reporting; + struct can_frame msg; + const struct can_bittiming *bt; + + priv = netdev_priv(dev); + card = priv->card; + + if (!card->fw.up) + return -EIO; + + ret = mutex_lock_interruptible(&card->fw.lock); + if (ret) + return ret; + + bus_bitmask_start = 0; + if (dev && up) + /* prepare to start this bus as well */ + bus_bitmask_start |= (1 << priv->index); + /* bring netdevs down */ + for (j = 0; j < ARRAY_SIZE(card->net); ++j) { + netdev = card->net[j]; + if (!netdev) + continue; + priv = netdev_priv(netdev); + + if (dev != netdev) + netif_stop_queue(netdev); + + if (netif_running(netdev)) { + if (dev != netdev) + bus_bitmask_start |= (1 << j); + priv->tx.pending = 0; + priv->tx.echo_put = 0; + priv->tx.echo_get = 0; + /* + * this bus' may just have called open_candev() + * which is rather stupid to call close_candev() + * already + * but we may come here from busoff recovery too + * in which case the echo_skb _needs_ flushing too. + * just be sure to call open_candev() again + */ + close_candev(netdev); + } + priv->can.state = CAN_STATE_STOPPED; + } + card->tx.pending = 0; + + softing_enable_irq(card, 0); + ret = softing_reset_chip(card); + if (ret) + goto failed; + if (!bus_bitmask_start) + /* no busses to be brought up */ + goto card_done; + + if ((bus_bitmask_start & 1) && (bus_bitmask_start & 2) + && (softing_error_reporting(card->net[0]) + != softing_error_reporting(card->net[1]))) { + dev_alert(&card->pdev->dev, + "err_reporting flag differs for busses\n"); + goto invalid; + } + error_reporting = 0; + if (bus_bitmask_start & 1) { + netdev = card->net[0]; + priv = netdev_priv(netdev); + error_reporting += softing_error_reporting(netdev); + /* init chip 1 */ + bt = &priv->can.bittiming; + iowrite16(bt->brp, &card->dpram[DPRAM_FCT_PARAM + 2]); + iowrite16(bt->sjw, &card->dpram[DPRAM_FCT_PARAM + 4]); + iowrite16(bt->phase_seg1 + bt->prop_seg, + &card->dpram[DPRAM_FCT_PARAM + 6]); + iowrite16(bt->phase_seg2, &card->dpram[DPRAM_FCT_PARAM + 8]); + iowrite16((priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) ? 1 : 0, + &card->dpram[DPRAM_FCT_PARAM + 10]); + ret = softing_fct_cmd(card, 1, "initialize_chip[0]"); + if (ret < 0) + goto failed; + /* set mode */ + iowrite16(0, &card->dpram[DPRAM_FCT_PARAM + 2]); + iowrite16(0, &card->dpram[DPRAM_FCT_PARAM + 4]); + ret = softing_fct_cmd(card, 3, "set_mode[0]"); + if (ret < 0) + goto failed; + /* set filter */ + /* 11bit id & mask */ + iowrite16(0x0000, &card->dpram[DPRAM_FCT_PARAM + 2]); + iowrite16(0x07ff, &card->dpram[DPRAM_FCT_PARAM + 4]); + /* 29bit id.lo & mask.lo & id.hi & mask.hi */ + iowrite16(0x0000, &card->dpram[DPRAM_FCT_PARAM + 6]); + iowrite16(0xffff, &card->dpram[DPRAM_FCT_PARAM + 8]); + iowrite16(0x0000, &card->dpram[DPRAM_FCT_PARAM + 10]); + iowrite16(0x1fff, &card->dpram[DPRAM_FCT_PARAM + 12]); + ret = softing_fct_cmd(card, 7, "set_filter[0]"); + if (ret < 0) + goto failed; + /* set output control */ + iowrite16(priv->output, &card->dpram[DPRAM_FCT_PARAM + 2]); + ret = softing_fct_cmd(card, 5, "set_output[0]"); + if (ret < 0) + goto failed; + } + if (bus_bitmask_start & 2) { + netdev = card->net[1]; + priv = netdev_priv(netdev); + error_reporting += softing_error_reporting(netdev); + /* init chip2 */ + bt = &priv->can.bittiming; + iowrite16(bt->brp, &card->dpram[DPRAM_FCT_PARAM + 2]); + iowrite16(bt->sjw, &card->dpram[DPRAM_FCT_PARAM + 4]); + iowrite16(bt->phase_seg1 + bt->prop_seg, + &card->dpram[DPRAM_FCT_PARAM + 6]); + iowrite16(bt->phase_seg2, &card->dpram[DPRAM_FCT_PARAM + 8]); + iowrite16((priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) ? 1 : 0, + &card->dpram[DPRAM_FCT_PARAM + 10]); + ret = softing_fct_cmd(card, 2, "initialize_chip[1]"); + if (ret < 0) + goto failed; + /* set mode2 */ + iowrite16(0, &card->dpram[DPRAM_FCT_PARAM + 2]); + iowrite16(0, &card->dpram[DPRAM_FCT_PARAM + 4]); + ret = softing_fct_cmd(card, 4, "set_mode[1]"); + if (ret < 0) + goto failed; + /* set filter2 */ + /* 11bit id & mask */ + iowrite16(0x0000, &card->dpram[DPRAM_FCT_PARAM + 2]); + iowrite16(0x07ff, &card->dpram[DPRAM_FCT_PARAM + 4]); + /* 29bit id.lo & mask.lo & id.hi & mask.hi */ + iowrite16(0x0000, &card->dpram[DPRAM_FCT_PARAM + 6]); + iowrite16(0xffff, &card->dpram[DPRAM_FCT_PARAM + 8]); + iowrite16(0x0000, &card->dpram[DPRAM_FCT_PARAM + 10]); + iowrite16(0x1fff, &card->dpram[DPRAM_FCT_PARAM + 12]); + ret = softing_fct_cmd(card, 8, "set_filter[1]"); + if (ret < 0) + goto failed; + /* set output control2 */ + iowrite16(priv->output, &card->dpram[DPRAM_FCT_PARAM + 2]); + ret = softing_fct_cmd(card, 6, "set_output[1]"); + if (ret < 0) + goto failed; + } + /* enable_error_frame */ + /* + * Error reporting is switched off at the moment since + * the receiving of them is not yet 100% verified + * This should be enabled sooner or later + * + if (error_reporting) { + ret = softing_fct_cmd(card, 51, "enable_error_frame"); + if (ret < 0) + goto failed; + } + */ + /* initialize interface */ + iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 2]); + iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 4]); + iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 6]); + iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 8]); + iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 10]); + iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 12]); + iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 14]); + iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 16]); + iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 18]); + iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 20]); + ret = softing_fct_cmd(card, 17, "initialize_interface"); + if (ret < 0) + goto failed; + /* enable_fifo */ + ret = softing_fct_cmd(card, 36, "enable_fifo"); + if (ret < 0) + goto failed; + /* enable fifo tx ack */ + ret = softing_fct_cmd(card, 13, "fifo_tx_ack[0]"); + if (ret < 0) + goto failed; + /* enable fifo tx ack2 */ + ret = softing_fct_cmd(card, 14, "fifo_tx_ack[1]"); + if (ret < 0) + goto failed; + /* start_chip */ + ret = softing_fct_cmd(card, 11, "start_chip"); + if (ret < 0) + goto failed; + iowrite8(0, &card->dpram[DPRAM_INFO_BUSSTATE]); + iowrite8(0, &card->dpram[DPRAM_INFO_BUSSTATE2]); + if (card->pdat->generation < 2) { + iowrite8(0, &card->dpram[DPRAM_V2_IRQ_TOHOST]); + /* flush the DPRAM caches */ + wmb(); + } + + softing_initialize_timestamp(card); + + /* + * do socketcan notifications/status changes + * from here, no errors should occur, or the failed: part + * must be reviewed + */ + memset(&msg, 0, sizeof(msg)); + msg.can_id = CAN_ERR_FLAG | CAN_ERR_RESTARTED; + msg.can_dlc = CAN_ERR_DLC; + for (j = 0; j < ARRAY_SIZE(card->net); ++j) { + if (!(bus_bitmask_start & (1 << j))) + continue; + netdev = card->net[j]; + if (!netdev) + continue; + priv = netdev_priv(netdev); + priv->can.state = CAN_STATE_ERROR_ACTIVE; + open_candev(netdev); + if (dev != netdev) { + /* notify other busses on the restart */ + softing_netdev_rx(netdev, &msg, ktime_set(0, 0)); + ++priv->can.can_stats.restarts; + } + netif_wake_queue(netdev); + } + + /* enable interrupts */ + ret = softing_enable_irq(card, 1); + if (ret) + goto failed; +card_done: + mutex_unlock(&card->fw.lock); + return 0; +invalid: + ret = -EINVAL; +failed: + softing_enable_irq(card, 0); + softing_reset_chip(card); + mutex_unlock(&card->fw.lock); + /* bring all other interfaces down */ + for (j = 0; j < ARRAY_SIZE(card->net); ++j) { + netdev = card->net[j]; + if (!netdev) + continue; + dev_close(netdev); + } + return ret; +} + +int softing_default_output(struct net_device *netdev) +{ + struct softing_priv *priv = netdev_priv(netdev); + struct softing *card = priv->card; + + switch (priv->chip) { + case 1000: + return (card->pdat->generation < 2) ? 0xfb : 0xfa; + case 5: + return 0x60; + default: + return 0x40; + } +} diff --git a/drivers/net/can/softing/softing_main.c b/drivers/net/can/softing/softing_main.c new file mode 100644 index 00000000000..5157e15e96e --- /dev/null +++ b/drivers/net/can/softing/softing_main.c @@ -0,0 +1,893 @@ +/* + * Copyright (C) 2008-2010 + * + * - Kurt Van Dijck, EIA Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the version 2 of the GNU General Public License + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include + +#include "softing.h" + +#define TX_ECHO_SKB_MAX (((TXMAX+1)/2)-1) + +/* + * test is a specific CAN netdev + * is online (ie. up 'n running, not sleeping, not busoff + */ +static inline int canif_is_active(struct net_device *netdev) +{ + struct can_priv *can = netdev_priv(netdev); + + if (!netif_running(netdev)) + return 0; + return (can->state <= CAN_STATE_ERROR_PASSIVE); +} + +/* reset DPRAM */ +static inline void softing_set_reset_dpram(struct softing *card) +{ + if (card->pdat->generation >= 2) { + spin_lock_bh(&card->spin); + iowrite8(ioread8(&card->dpram[DPRAM_V2_RESET]) & ~1, + &card->dpram[DPRAM_V2_RESET]); + spin_unlock_bh(&card->spin); + } +} + +static inline void softing_clr_reset_dpram(struct softing *card) +{ + if (card->pdat->generation >= 2) { + spin_lock_bh(&card->spin); + iowrite8(ioread8(&card->dpram[DPRAM_V2_RESET]) | 1, + &card->dpram[DPRAM_V2_RESET]); + spin_unlock_bh(&card->spin); + } +} + +/* trigger the tx queue-ing */ +static netdev_tx_t softing_netdev_start_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + struct softing_priv *priv = netdev_priv(dev); + struct softing *card = priv->card; + int ret; + uint8_t *ptr; + uint8_t fifo_wr, fifo_rd; + struct can_frame *cf = (struct can_frame *)skb->data; + uint8_t buf[DPRAM_TX_SIZE]; + + if (can_dropped_invalid_skb(dev, skb)) + return NETDEV_TX_OK; + + spin_lock(&card->spin); + + ret = NETDEV_TX_BUSY; + if (!card->fw.up || + (card->tx.pending >= TXMAX) || + (priv->tx.pending >= TX_ECHO_SKB_MAX)) + goto xmit_done; + fifo_wr = ioread8(&card->dpram[DPRAM_TX_WR]); + fifo_rd = ioread8(&card->dpram[DPRAM_TX_RD]); + if (fifo_wr == fifo_rd) + /* fifo full */ + goto xmit_done; + memset(buf, 0, sizeof(buf)); + ptr = buf; + *ptr = CMD_TX; + if (cf->can_id & CAN_RTR_FLAG) + *ptr |= CMD_RTR; + if (cf->can_id & CAN_EFF_FLAG) + *ptr |= CMD_XTD; + if (priv->index) + *ptr |= CMD_BUS2; + ++ptr; + *ptr++ = cf->can_dlc; + *ptr++ = (cf->can_id >> 0); + *ptr++ = (cf->can_id >> 8); + if (cf->can_id & CAN_EFF_FLAG) { + *ptr++ = (cf->can_id >> 16); + *ptr++ = (cf->can_id >> 24); + } else { + /* increment 1, not 2 as you might think */ + ptr += 1; + } + if (!(cf->can_id & CAN_RTR_FLAG)) + memcpy(ptr, &cf->data[0], cf->can_dlc); + memcpy_toio(&card->dpram[DPRAM_TX + DPRAM_TX_SIZE * fifo_wr], + buf, DPRAM_TX_SIZE); + if (++fifo_wr >= DPRAM_TX_CNT) + fifo_wr = 0; + iowrite8(fifo_wr, &card->dpram[DPRAM_TX_WR]); + card->tx.last_bus = priv->index; + ++card->tx.pending; + ++priv->tx.pending; + can_put_echo_skb(skb, dev, priv->tx.echo_put); + ++priv->tx.echo_put; + if (priv->tx.echo_put >= TX_ECHO_SKB_MAX) + priv->tx.echo_put = 0; + /* can_put_echo_skb() saves the skb, safe to return TX_OK */ + ret = NETDEV_TX_OK; +xmit_done: + spin_unlock(&card->spin); + if (card->tx.pending >= TXMAX) { + int j; + for (j = 0; j < ARRAY_SIZE(card->net); ++j) { + if (card->net[j]) + netif_stop_queue(card->net[j]); + } + } + if (ret != NETDEV_TX_OK) + netif_stop_queue(dev); + + return ret; +} + +/* + * shortcut for skb delivery + */ +int softing_netdev_rx(struct net_device *netdev, const struct can_frame *msg, + ktime_t ktime) +{ + struct sk_buff *skb; + struct can_frame *cf; + + skb = alloc_can_skb(netdev, &cf); + if (!skb) + return -ENOMEM; + memcpy(cf, msg, sizeof(*msg)); + skb->tstamp = ktime; + return netif_rx(skb); +} + +/* + * softing_handle_1 + * pop 1 entry from the DPRAM queue, and process + */ +static int softing_handle_1(struct softing *card) +{ + struct net_device *netdev; + struct softing_priv *priv; + ktime_t ktime; + struct can_frame msg; + int cnt = 0, lost_msg; + uint8_t fifo_rd, fifo_wr, cmd; + uint8_t *ptr; + uint32_t tmp_u32; + uint8_t buf[DPRAM_RX_SIZE]; + + memset(&msg, 0, sizeof(msg)); + /* test for lost msgs */ + lost_msg = ioread8(&card->dpram[DPRAM_RX_LOST]); + if (lost_msg) { + int j; + /* reset condition */ + iowrite8(0, &card->dpram[DPRAM_RX_LOST]); + /* prepare msg */ + msg.can_id = CAN_ERR_FLAG | CAN_ERR_CRTL; + msg.can_dlc = CAN_ERR_DLC; + msg.data[1] = CAN_ERR_CRTL_RX_OVERFLOW; + /* + * service to all busses, we don't know which it was applicable + * but only service busses that are online + */ + for (j = 0; j < ARRAY_SIZE(card->net); ++j) { + netdev = card->net[j]; + if (!netdev) + continue; + if (!canif_is_active(netdev)) + /* a dead bus has no overflows */ + continue; + ++netdev->stats.rx_over_errors; + softing_netdev_rx(netdev, &msg, ktime_set(0, 0)); + } + /* prepare for other use */ + memset(&msg, 0, sizeof(msg)); + ++cnt; + } + + fifo_rd = ioread8(&card->dpram[DPRAM_RX_RD]); + fifo_wr = ioread8(&card->dpram[DPRAM_RX_WR]); + + if (++fifo_rd >= DPRAM_RX_CNT) + fifo_rd = 0; + if (fifo_wr == fifo_rd) + return cnt; + + memcpy_fromio(buf, &card->dpram[DPRAM_RX + DPRAM_RX_SIZE*fifo_rd], + DPRAM_RX_SIZE); + mb(); + /* trigger dual port RAM */ + iowrite8(fifo_rd, &card->dpram[DPRAM_RX_RD]); + + ptr = buf; + cmd = *ptr++; + if (cmd == 0xff) + /* not quite usefull, probably the card has got out */ + return 0; + netdev = card->net[0]; + if (cmd & CMD_BUS2) + netdev = card->net[1]; + priv = netdev_priv(netdev); + + if (cmd & CMD_ERR) { + uint8_t can_state, state; + + state = *ptr++; + + msg.can_id = CAN_ERR_FLAG; + msg.can_dlc = CAN_ERR_DLC; + + if (state & SF_MASK_BUSOFF) { + can_state = CAN_STATE_BUS_OFF; + msg.can_id |= CAN_ERR_BUSOFF; + state = STATE_BUSOFF; + } else if (state & SF_MASK_EPASSIVE) { + can_state = CAN_STATE_ERROR_PASSIVE; + msg.can_id |= CAN_ERR_CRTL; + msg.data[1] = CAN_ERR_CRTL_TX_PASSIVE; + state = STATE_EPASSIVE; + } else { + can_state = CAN_STATE_ERROR_ACTIVE; + msg.can_id |= CAN_ERR_CRTL; + state = STATE_EACTIVE; + } + /* update DPRAM */ + iowrite8(state, &card->dpram[priv->index ? + DPRAM_INFO_BUSSTATE2 : DPRAM_INFO_BUSSTATE]); + /* timestamp */ + tmp_u32 = le32_to_cpup((void *)ptr); + ptr += 4; + ktime = softing_raw2ktime(card, tmp_u32); + + ++netdev->stats.rx_errors; + /* update internal status */ + if (can_state != priv->can.state) { + priv->can.state = can_state; + if (can_state == CAN_STATE_ERROR_PASSIVE) + ++priv->can.can_stats.error_passive; + else if (can_state == CAN_STATE_BUS_OFF) { + /* this calls can_close_cleanup() */ + can_bus_off(netdev); + netif_stop_queue(netdev); + } + /* trigger socketcan */ + softing_netdev_rx(netdev, &msg, ktime); + } + + } else { + if (cmd & CMD_RTR) + msg.can_id |= CAN_RTR_FLAG; + msg.can_dlc = get_can_dlc(*ptr++); + if (cmd & CMD_XTD) { + msg.can_id |= CAN_EFF_FLAG; + msg.can_id |= le32_to_cpup((void *)ptr); + ptr += 4; + } else { + msg.can_id |= le16_to_cpup((void *)ptr); + ptr += 2; + } + /* timestamp */ + tmp_u32 = le32_to_cpup((void *)ptr); + ptr += 4; + ktime = softing_raw2ktime(card, tmp_u32); + if (!(msg.can_id & CAN_RTR_FLAG)) + memcpy(&msg.data[0], ptr, 8); + ptr += 8; + /* update socket */ + if (cmd & CMD_ACK) { + /* acknowledge, was tx msg */ + struct sk_buff *skb; + skb = priv->can.echo_skb[priv->tx.echo_get]; + if (skb) + skb->tstamp = ktime; + can_get_echo_skb(netdev, priv->tx.echo_get); + ++priv->tx.echo_get; + if (priv->tx.echo_get >= TX_ECHO_SKB_MAX) + priv->tx.echo_get = 0; + if (priv->tx.pending) + --priv->tx.pending; + if (card->tx.pending) + --card->tx.pending; + ++netdev->stats.tx_packets; + if (!(msg.can_id & CAN_RTR_FLAG)) + netdev->stats.tx_bytes += msg.can_dlc; + } else { + int ret; + + ret = softing_netdev_rx(netdev, &msg, ktime); + if (ret == NET_RX_SUCCESS) { + ++netdev->stats.rx_packets; + if (!(msg.can_id & CAN_RTR_FLAG)) + netdev->stats.rx_bytes += msg.can_dlc; + } else { + ++netdev->stats.rx_dropped; + } + } + } + ++cnt; + return cnt; +} + +/* + * real interrupt handler + */ +static irqreturn_t softing_irq_thread(int irq, void *dev_id) +{ + struct softing *card = (struct softing *)dev_id; + struct net_device *netdev; + struct softing_priv *priv; + int j, offset, work_done; + + work_done = 0; + spin_lock_bh(&card->spin); + while (softing_handle_1(card) > 0) { + ++card->irq.svc_count; + ++work_done; + } + spin_unlock_bh(&card->spin); + /* resume tx queue's */ + offset = card->tx.last_bus; + for (j = 0; j < ARRAY_SIZE(card->net); ++j) { + if (card->tx.pending >= TXMAX) + break; + netdev = card->net[(j + offset + 1) % card->pdat->nbus]; + if (!netdev) + continue; + priv = netdev_priv(netdev); + if (!canif_is_active(netdev)) + /* it makes no sense to wake dead busses */ + continue; + if (priv->tx.pending >= TX_ECHO_SKB_MAX) + continue; + ++work_done; + netif_wake_queue(netdev); + } + return work_done ? IRQ_HANDLED : IRQ_NONE; +} + +/* + * interrupt routines: + * schedule the 'real interrupt handler' + */ +static irqreturn_t softing_irq_v2(int irq, void *dev_id) +{ + struct softing *card = (struct softing *)dev_id; + uint8_t ir; + + ir = ioread8(&card->dpram[DPRAM_V2_IRQ_TOHOST]); + iowrite8(0, &card->dpram[DPRAM_V2_IRQ_TOHOST]); + return (1 == ir) ? IRQ_WAKE_THREAD : IRQ_NONE; +} + +static irqreturn_t softing_irq_v1(int irq, void *dev_id) +{ + struct softing *card = (struct softing *)dev_id; + uint8_t ir; + + ir = ioread8(&card->dpram[DPRAM_IRQ_TOHOST]); + iowrite8(0, &card->dpram[DPRAM_IRQ_TOHOST]); + return ir ? IRQ_WAKE_THREAD : IRQ_NONE; +} + +/* + * netdev/candev inter-operability + */ +static int softing_netdev_open(struct net_device *ndev) +{ + int ret; + + /* check or determine and set bittime */ + ret = open_candev(ndev); + if (!ret) + ret = softing_startstop(ndev, 1); + return ret; +} + +static int softing_netdev_stop(struct net_device *ndev) +{ + int ret; + + netif_stop_queue(ndev); + + /* softing cycle does close_candev() */ + ret = softing_startstop(ndev, 0); + return ret; +} + +static int softing_candev_set_mode(struct net_device *ndev, enum can_mode mode) +{ + int ret; + + switch (mode) { + case CAN_MODE_START: + /* softing_startstop does close_candev() */ + ret = softing_startstop(ndev, 1); + return ret; + case CAN_MODE_STOP: + case CAN_MODE_SLEEP: + return -EOPNOTSUPP; + } + return 0; +} + +/* + * Softing device management helpers + */ +int softing_enable_irq(struct softing *card, int enable) +{ + int ret; + + if (!card->irq.nr) { + return 0; + } else if (card->irq.requested && !enable) { + free_irq(card->irq.nr, card); + card->irq.requested = 0; + } else if (!card->irq.requested && enable) { + ret = request_threaded_irq(card->irq.nr, + (card->pdat->generation >= 2) ? + softing_irq_v2 : softing_irq_v1, + softing_irq_thread, IRQF_SHARED, + dev_name(&card->pdev->dev), card); + if (ret) { + dev_alert(&card->pdev->dev, + "request_threaded_irq(%u) failed\n", + card->irq.nr); + return ret; + } + card->irq.requested = 1; + } + return 0; +} + +static void softing_card_shutdown(struct softing *card) +{ + int fw_up = 0; + + if (mutex_lock_interruptible(&card->fw.lock)) + /* return -ERESTARTSYS */; + fw_up = card->fw.up; + card->fw.up = 0; + + if (card->irq.requested && card->irq.nr) { + free_irq(card->irq.nr, card); + card->irq.requested = 0; + } + if (fw_up) { + if (card->pdat->enable_irq) + card->pdat->enable_irq(card->pdev, 0); + softing_set_reset_dpram(card); + if (card->pdat->reset) + card->pdat->reset(card->pdev, 1); + } + mutex_unlock(&card->fw.lock); +} + +static __devinit int softing_card_boot(struct softing *card) +{ + int ret, j; + static const uint8_t stream[] = { + 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, }; + unsigned char back[sizeof(stream)]; + + if (mutex_lock_interruptible(&card->fw.lock)) + return -ERESTARTSYS; + if (card->fw.up) { + mutex_unlock(&card->fw.lock); + return 0; + } + /* reset board */ + if (card->pdat->enable_irq) + card->pdat->enable_irq(card->pdev, 1); + /* boot card */ + softing_set_reset_dpram(card); + if (card->pdat->reset) + card->pdat->reset(card->pdev, 1); + for (j = 0; (j + sizeof(stream)) < card->dpram_size; + j += sizeof(stream)) { + + memcpy_toio(&card->dpram[j], stream, sizeof(stream)); + /* flush IO cache */ + mb(); + memcpy_fromio(back, &card->dpram[j], sizeof(stream)); + + if (!memcmp(back, stream, sizeof(stream))) + continue; + /* memory is not equal */ + dev_alert(&card->pdev->dev, "dpram failed at 0x%04x\n", j); + ret = -EIO; + goto failed; + } + wmb(); + /* load boot firmware */ + ret = softing_load_fw(card->pdat->boot.fw, card, card->dpram, + card->dpram_size, + card->pdat->boot.offs - card->pdat->boot.addr); + if (ret < 0) + goto failed; + /* load loader firmware */ + ret = softing_load_fw(card->pdat->load.fw, card, card->dpram, + card->dpram_size, + card->pdat->load.offs - card->pdat->load.addr); + if (ret < 0) + goto failed; + + if (card->pdat->reset) + card->pdat->reset(card->pdev, 0); + softing_clr_reset_dpram(card); + ret = softing_bootloader_command(card, 0, "card boot"); + if (ret < 0) + goto failed; + ret = softing_load_app_fw(card->pdat->app.fw, card); + if (ret < 0) + goto failed; + + ret = softing_chip_poweron(card); + if (ret < 0) + goto failed; + + card->fw.up = 1; + mutex_unlock(&card->fw.lock); + return 0; +failed: + card->fw.up = 0; + if (card->pdat->enable_irq) + card->pdat->enable_irq(card->pdev, 0); + softing_set_reset_dpram(card); + if (card->pdat->reset) + card->pdat->reset(card->pdev, 1); + mutex_unlock(&card->fw.lock); + return ret; +} + +/* + * netdev sysfs + */ +static ssize_t show_channel(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct net_device *ndev = to_net_dev(dev); + struct softing_priv *priv = netdev2softing(ndev); + + return sprintf(buf, "%i\n", priv->index); +} + +static ssize_t show_chip(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct net_device *ndev = to_net_dev(dev); + struct softing_priv *priv = netdev2softing(ndev); + + return sprintf(buf, "%i\n", priv->chip); +} + +static ssize_t show_output(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct net_device *ndev = to_net_dev(dev); + struct softing_priv *priv = netdev2softing(ndev); + + return sprintf(buf, "0x%02x\n", priv->output); +} + +static ssize_t store_output(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct net_device *ndev = to_net_dev(dev); + struct softing_priv *priv = netdev2softing(ndev); + struct softing *card = priv->card; + unsigned long val; + int ret; + + ret = strict_strtoul(buf, 0, &val); + if (ret < 0) + return ret; + val &= 0xFF; + + ret = mutex_lock_interruptible(&card->fw.lock); + if (ret) + return -ERESTARTSYS; + if (netif_running(ndev)) { + mutex_unlock(&card->fw.lock); + return -EBUSY; + } + priv->output = val; + mutex_unlock(&card->fw.lock); + return count; +} + +static const DEVICE_ATTR(channel, S_IRUGO, show_channel, NULL); +static const DEVICE_ATTR(chip, S_IRUGO, show_chip, NULL); +static const DEVICE_ATTR(output, S_IRUGO | S_IWUSR, show_output, store_output); + +static const struct attribute *const netdev_sysfs_attrs[] = { + &dev_attr_channel.attr, + &dev_attr_chip.attr, + &dev_attr_output.attr, + NULL, +}; +static const struct attribute_group netdev_sysfs_group = { + .name = NULL, + .attrs = (struct attribute **)netdev_sysfs_attrs, +}; + +static const struct net_device_ops softing_netdev_ops = { + .ndo_open = softing_netdev_open, + .ndo_stop = softing_netdev_stop, + .ndo_start_xmit = softing_netdev_start_xmit, +}; + +static const struct can_bittiming_const softing_btr_const = { + .tseg1_min = 1, + .tseg1_max = 16, + .tseg2_min = 1, + .tseg2_max = 8, + .sjw_max = 4, /* overruled */ + .brp_min = 1, + .brp_max = 32, /* overruled */ + .brp_inc = 1, +}; + + +static __devinit struct net_device *softing_netdev_create(struct softing *card, + uint16_t chip_id) +{ + struct net_device *netdev; + struct softing_priv *priv; + + netdev = alloc_candev(sizeof(*priv), TX_ECHO_SKB_MAX); + if (!netdev) { + dev_alert(&card->pdev->dev, "alloc_candev failed\n"); + return NULL; + } + priv = netdev_priv(netdev); + priv->netdev = netdev; + priv->card = card; + memcpy(&priv->btr_const, &softing_btr_const, sizeof(priv->btr_const)); + priv->btr_const.brp_max = card->pdat->max_brp; + priv->btr_const.sjw_max = card->pdat->max_sjw; + priv->can.bittiming_const = &priv->btr_const; + priv->can.clock.freq = 8000000; + priv->chip = chip_id; + priv->output = softing_default_output(netdev); + SET_NETDEV_DEV(netdev, &card->pdev->dev); + + netdev->flags |= IFF_ECHO; + netdev->netdev_ops = &softing_netdev_ops; + priv->can.do_set_mode = softing_candev_set_mode; + priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES; + + return netdev; +} + +static __devinit int softing_netdev_register(struct net_device *netdev) +{ + int ret; + + netdev->sysfs_groups[0] = &netdev_sysfs_group; + ret = register_candev(netdev); + if (ret) { + dev_alert(&netdev->dev, "register failed\n"); + return ret; + } + return 0; +} + +static void softing_netdev_cleanup(struct net_device *netdev) +{ + unregister_candev(netdev); + free_candev(netdev); +} + +/* + * sysfs for Platform device + */ +#define DEV_ATTR_RO(name, member) \ +static ssize_t show_##name(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct softing *card = platform_get_drvdata(to_platform_device(dev)); \ + return sprintf(buf, "%u\n", card->member); \ +} \ +static DEVICE_ATTR(name, 0444, show_##name, NULL) + +#define DEV_ATTR_RO_STR(name, member) \ +static ssize_t show_##name(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct softing *card = platform_get_drvdata(to_platform_device(dev)); \ + return sprintf(buf, "%s\n", card->member); \ +} \ +static DEVICE_ATTR(name, 0444, show_##name, NULL) + +DEV_ATTR_RO(serial, id.serial); +DEV_ATTR_RO_STR(firmware, pdat->app.fw); +DEV_ATTR_RO(firmware_version, id.fw_version); +DEV_ATTR_RO_STR(hardware, pdat->name); +DEV_ATTR_RO(hardware_version, id.hw_version); +DEV_ATTR_RO(license, id.license); +DEV_ATTR_RO(frequency, id.freq); +DEV_ATTR_RO(txpending, tx.pending); + +static struct attribute *softing_pdev_attrs[] = { + &dev_attr_serial.attr, + &dev_attr_firmware.attr, + &dev_attr_firmware_version.attr, + &dev_attr_hardware.attr, + &dev_attr_hardware_version.attr, + &dev_attr_license.attr, + &dev_attr_frequency.attr, + &dev_attr_txpending.attr, + NULL, +}; + +static const struct attribute_group softing_pdev_group = { + .name = NULL, + .attrs = softing_pdev_attrs, +}; + +/* + * platform driver + */ +static __devexit int softing_pdev_remove(struct platform_device *pdev) +{ + struct softing *card = platform_get_drvdata(pdev); + int j; + + /* first, disable card*/ + softing_card_shutdown(card); + + for (j = 0; j < ARRAY_SIZE(card->net); ++j) { + if (!card->net[j]) + continue; + softing_netdev_cleanup(card->net[j]); + card->net[j] = NULL; + } + sysfs_remove_group(&pdev->dev.kobj, &softing_pdev_group); + + iounmap(card->dpram); + kfree(card); + return 0; +} + +static __devinit int softing_pdev_probe(struct platform_device *pdev) +{ + const struct softing_platform_data *pdat = pdev->dev.platform_data; + struct softing *card; + struct net_device *netdev; + struct softing_priv *priv; + struct resource *pres; + int ret; + int j; + + if (!pdat) { + dev_warn(&pdev->dev, "no platform data\n"); + return -EINVAL; + } + if (pdat->nbus > ARRAY_SIZE(card->net)) { + dev_warn(&pdev->dev, "%u nets??\n", pdat->nbus); + return -EINVAL; + } + + card = kzalloc(sizeof(*card), GFP_KERNEL); + if (!card) + return -ENOMEM; + card->pdat = pdat; + card->pdev = pdev; + platform_set_drvdata(pdev, card); + mutex_init(&card->fw.lock); + spin_lock_init(&card->spin); + + ret = -EINVAL; + pres = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!pres) + goto platform_resource_failed;; + card->dpram_phys = pres->start; + card->dpram_size = pres->end - pres->start + 1; + card->dpram = ioremap_nocache(card->dpram_phys, card->dpram_size); + if (!card->dpram) { + dev_alert(&card->pdev->dev, "dpram ioremap failed\n"); + goto ioremap_failed; + } + + pres = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (pres) + card->irq.nr = pres->start; + + /* reset card */ + ret = softing_card_boot(card); + if (ret < 0) { + dev_alert(&pdev->dev, "failed to boot\n"); + goto boot_failed; + } + + /* only now, the chip's are known */ + card->id.freq = card->pdat->freq; + + ret = sysfs_create_group(&pdev->dev.kobj, &softing_pdev_group); + if (ret < 0) { + dev_alert(&card->pdev->dev, "sysfs failed\n"); + goto sysfs_failed; + } + + ret = -ENOMEM; + for (j = 0; j < ARRAY_SIZE(card->net); ++j) { + card->net[j] = netdev = + softing_netdev_create(card, card->id.chip[j]); + if (!netdev) { + dev_alert(&pdev->dev, "failed to make can[%i]", j); + goto netdev_failed; + } + priv = netdev_priv(card->net[j]); + priv->index = j; + ret = softing_netdev_register(netdev); + if (ret) { + free_candev(netdev); + card->net[j] = NULL; + dev_alert(&card->pdev->dev, + "failed to register can[%i]\n", j); + goto netdev_failed; + } + } + dev_info(&card->pdev->dev, "%s ready.\n", card->pdat->name); + return 0; + +netdev_failed: + for (j = 0; j < ARRAY_SIZE(card->net); ++j) { + if (!card->net[j]) + continue; + softing_netdev_cleanup(card->net[j]); + } + sysfs_remove_group(&pdev->dev.kobj, &softing_pdev_group); +sysfs_failed: + softing_card_shutdown(card); +boot_failed: + iounmap(card->dpram); +ioremap_failed: +platform_resource_failed: + kfree(card); + return ret; +} + +static struct platform_driver softing_driver = { + .driver = { + .name = "softing", + .owner = THIS_MODULE, + }, + .probe = softing_pdev_probe, + .remove = __devexit_p(softing_pdev_remove), +}; + +MODULE_ALIAS("platform:softing"); + +static int __init softing_start(void) +{ + return platform_driver_register(&softing_driver); +} + +static void __exit softing_stop(void) +{ + platform_driver_unregister(&softing_driver); +} + +module_init(softing_start); +module_exit(softing_stop); + +MODULE_DESCRIPTION("Softing DPRAM CAN driver"); +MODULE_AUTHOR("Kurt Van Dijck "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/can/softing/softing_platform.h b/drivers/net/can/softing/softing_platform.h new file mode 100644 index 00000000000..ebbf6981562 --- /dev/null +++ b/drivers/net/can/softing/softing_platform.h @@ -0,0 +1,40 @@ + +#include + +#ifndef _SOFTING_DEVICE_H_ +#define _SOFTING_DEVICE_H_ + +/* softing firmware directory prefix */ +#define fw_dir "softing-4.6/" + +struct softing_platform_data { + unsigned int manf; + unsigned int prod; + /* + * generation + * 1st with NEC or SJA1000 + * 8bit, exclusive interrupt, ... + * 2nd only SJA1000 + * 16bit, shared interrupt + */ + int generation; + int nbus; /* # busses on device */ + unsigned int freq; /* operating frequency in Hz */ + unsigned int max_brp; + unsigned int max_sjw; + unsigned long dpram_size; + const char *name; + struct { + unsigned long offs; + unsigned long addr; + const char *fw; + } boot, load, app; + /* + * reset() function + * bring pdev in or out of reset, depending on value + */ + int (*reset)(struct platform_device *pdev, int value); + int (*enable_irq)(struct platform_device *pdev, int value); +}; + +#endif -- cgit v1.2.3-18-g5258 From 0a0b7a5f7a043d86a95990d3227cf7e823ae52ac Mon Sep 17 00:00:00 2001 From: Kurt Van Dijck Date: Tue, 11 Jan 2011 04:34:28 +0000 Subject: can: add driver for Softing card This patch adds the driver that creates a platform:softing device from a pcmcia_device Note: the Kconfig indicates a dependency on the softing.ko driver, but this is purely to make configuration intuitive. This driver will work independent, but no CAN network devices appear until softing.ko is loaded too. Signed-off-by: Kurt Van Dijck Acked-by: Wolfgang Grandegger Signed-off-by: David S. Miller --- drivers/net/can/softing/Kconfig | 14 ++ drivers/net/can/softing/Makefile | 1 + drivers/net/can/softing/softing_cs.c | 359 +++++++++++++++++++++++++++++++++++ 3 files changed, 374 insertions(+) create mode 100644 drivers/net/can/softing/softing_cs.c diff --git a/drivers/net/can/softing/Kconfig b/drivers/net/can/softing/Kconfig index 072f337f42e..92bd6bdde5e 100644 --- a/drivers/net/can/softing/Kconfig +++ b/drivers/net/can/softing/Kconfig @@ -14,3 +14,17 @@ config CAN_SOFTING controls the 2 busses on the card together. As such, some actions (start/stop/busoff recovery) on 1 bus must bring down the other bus too temporarily. + +config CAN_SOFTING_CS + tristate "Softing Gmbh CAN pcmcia cards" + depends on PCMCIA + select CAN_SOFTING + ---help--- + Support for PCMCIA cards from Softing Gmbh & some cards + from Vector Gmbh. + You need firmware for these, which you can get at + http://developer.berlios.de/projects/socketcan/ + This version of the driver is written against + firmware version 4.6 (softing-fw-4.6-binaries.tar.gz) + In order to use the card as CAN device, you need the Softing generic + support too. diff --git a/drivers/net/can/softing/Makefile b/drivers/net/can/softing/Makefile index 7db04452deb..c5e5016c742 100644 --- a/drivers/net/can/softing/Makefile +++ b/drivers/net/can/softing/Makefile @@ -1,5 +1,6 @@ softing-y := softing_main.o softing_fw.o obj-$(CONFIG_CAN_SOFTING) += softing.o +obj-$(CONFIG_CAN_SOFTING_CS) += softing_cs.o ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG diff --git a/drivers/net/can/softing/softing_cs.c b/drivers/net/can/softing/softing_cs.c new file mode 100644 index 00000000000..300fe75dd1a --- /dev/null +++ b/drivers/net/can/softing/softing_cs.c @@ -0,0 +1,359 @@ +/* + * Copyright (C) 2008-2010 + * + * - Kurt Van Dijck, EIA Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the version 2 of the GNU General Public License + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include + +#include +#include + +#include "softing_platform.h" + +static int softingcs_index; +static spinlock_t softingcs_index_lock; + +static int softingcs_reset(struct platform_device *pdev, int v); +static int softingcs_enable_irq(struct platform_device *pdev, int v); + +/* + * platform_data descriptions + */ +#define MHZ (1000*1000) +static const struct softing_platform_data softingcs_platform_data[] = { +{ + .name = "CANcard", + .manf = 0x0168, .prod = 0x001, + .generation = 1, + .nbus = 2, + .freq = 16 * MHZ, .max_brp = 32, .max_sjw = 4, + .dpram_size = 0x0800, + .boot = {0x0000, 0x000000, fw_dir "bcard.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cancard.bin",}, + .reset = softingcs_reset, + .enable_irq = softingcs_enable_irq, +}, { + .name = "CANcard-NEC", + .manf = 0x0168, .prod = 0x002, + .generation = 1, + .nbus = 2, + .freq = 16 * MHZ, .max_brp = 32, .max_sjw = 4, + .dpram_size = 0x0800, + .boot = {0x0000, 0x000000, fw_dir "bcard.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cancard.bin",}, + .reset = softingcs_reset, + .enable_irq = softingcs_enable_irq, +}, { + .name = "CANcard-SJA", + .manf = 0x0168, .prod = 0x004, + .generation = 1, + .nbus = 2, + .freq = 20 * MHZ, .max_brp = 32, .max_sjw = 4, + .dpram_size = 0x0800, + .boot = {0x0000, 0x000000, fw_dir "bcard.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cansja.bin",}, + .reset = softingcs_reset, + .enable_irq = softingcs_enable_irq, +}, { + .name = "CANcard-2", + .manf = 0x0168, .prod = 0x005, + .generation = 2, + .nbus = 2, + .freq = 24 * MHZ, .max_brp = 64, .max_sjw = 4, + .dpram_size = 0x1000, + .boot = {0x0000, 0x000000, fw_dir "bcard2.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard2.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cancrd2.bin",}, + .reset = softingcs_reset, + .enable_irq = NULL, +}, { + .name = "Vector-CANcard", + .manf = 0x0168, .prod = 0x081, + .generation = 1, + .nbus = 2, + .freq = 16 * MHZ, .max_brp = 64, .max_sjw = 4, + .dpram_size = 0x0800, + .boot = {0x0000, 0x000000, fw_dir "bcard.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cancard.bin",}, + .reset = softingcs_reset, + .enable_irq = softingcs_enable_irq, +}, { + .name = "Vector-CANcard-SJA", + .manf = 0x0168, .prod = 0x084, + .generation = 1, + .nbus = 2, + .freq = 20 * MHZ, .max_brp = 32, .max_sjw = 4, + .dpram_size = 0x0800, + .boot = {0x0000, 0x000000, fw_dir "bcard.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cansja.bin",}, + .reset = softingcs_reset, + .enable_irq = softingcs_enable_irq, +}, { + .name = "Vector-CANcard-2", + .manf = 0x0168, .prod = 0x085, + .generation = 2, + .nbus = 2, + .freq = 24 * MHZ, .max_brp = 64, .max_sjw = 4, + .dpram_size = 0x1000, + .boot = {0x0000, 0x000000, fw_dir "bcard2.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard2.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cancrd2.bin",}, + .reset = softingcs_reset, + .enable_irq = NULL, +}, { + .name = "EDICcard-NEC", + .manf = 0x0168, .prod = 0x102, + .generation = 1, + .nbus = 2, + .freq = 16 * MHZ, .max_brp = 64, .max_sjw = 4, + .dpram_size = 0x0800, + .boot = {0x0000, 0x000000, fw_dir "bcard.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cancard.bin",}, + .reset = softingcs_reset, + .enable_irq = softingcs_enable_irq, +}, { + .name = "EDICcard-2", + .manf = 0x0168, .prod = 0x105, + .generation = 2, + .nbus = 2, + .freq = 24 * MHZ, .max_brp = 64, .max_sjw = 4, + .dpram_size = 0x1000, + .boot = {0x0000, 0x000000, fw_dir "bcard2.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard2.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cancrd2.bin",}, + .reset = softingcs_reset, + .enable_irq = NULL, +}, { + 0, 0, +}, +}; + +MODULE_FIRMWARE(fw_dir "bcard.bin"); +MODULE_FIRMWARE(fw_dir "ldcard.bin"); +MODULE_FIRMWARE(fw_dir "cancard.bin"); +MODULE_FIRMWARE(fw_dir "cansja.bin"); + +MODULE_FIRMWARE(fw_dir "bcard2.bin"); +MODULE_FIRMWARE(fw_dir "ldcard2.bin"); +MODULE_FIRMWARE(fw_dir "cancrd2.bin"); + +static __devinit const struct softing_platform_data +*softingcs_find_platform_data(unsigned int manf, unsigned int prod) +{ + const struct softing_platform_data *lp; + + for (lp = softingcs_platform_data; lp->manf; ++lp) { + if ((lp->manf == manf) && (lp->prod == prod)) + return lp; + } + return NULL; +} + +/* + * platformdata callbacks + */ +static int softingcs_reset(struct platform_device *pdev, int v) +{ + struct pcmcia_device *pcmcia = to_pcmcia_dev(pdev->dev.parent); + + dev_dbg(&pdev->dev, "pcmcia config [2] %02x\n", v ? 0 : 0x20); + return pcmcia_write_config_byte(pcmcia, 2, v ? 0 : 0x20); +} + +static int softingcs_enable_irq(struct platform_device *pdev, int v) +{ + struct pcmcia_device *pcmcia = to_pcmcia_dev(pdev->dev.parent); + + dev_dbg(&pdev->dev, "pcmcia config [0] %02x\n", v ? 0x60 : 0); + return pcmcia_write_config_byte(pcmcia, 0, v ? 0x60 : 0); +} + +/* + * pcmcia check + */ +static __devinit int softingcs_probe_config(struct pcmcia_device *pcmcia, + void *priv_data) +{ + struct softing_platform_data *pdat = priv_data; + struct resource *pres; + int memspeed = 0; + + WARN_ON(!pdat); + pres = pcmcia->resource[PCMCIA_IOMEM_0]; + if (resource_size(pres) < 0x1000) + return -ERANGE; + + pres->flags |= WIN_MEMORY_TYPE_CM | WIN_ENABLE; + if (pdat->generation < 2) { + pres->flags |= WIN_USE_WAIT | WIN_DATA_WIDTH_8; + memspeed = 3; + } else { + pres->flags |= WIN_DATA_WIDTH_16; + } + return pcmcia_request_window(pcmcia, pres, memspeed); +} + +static __devexit void softingcs_remove(struct pcmcia_device *pcmcia) +{ + struct platform_device *pdev = pcmcia->priv; + + /* free bits */ + platform_device_unregister(pdev); + /* release pcmcia stuff */ + pcmcia_disable_device(pcmcia); +} + +/* + * platform_device wrapper + * pdev->resource has 2 entries: io & irq + */ +static void softingcs_pdev_release(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + kfree(pdev); +} + +static __devinit int softingcs_probe(struct pcmcia_device *pcmcia) +{ + int ret; + struct platform_device *pdev; + const struct softing_platform_data *pdat; + struct resource *pres; + struct dev { + struct platform_device pdev; + struct resource res[2]; + } *dev; + + /* find matching platform_data */ + pdat = softingcs_find_platform_data(pcmcia->manf_id, pcmcia->card_id); + if (!pdat) + return -ENOTTY; + + /* setup pcmcia device */ + pcmcia->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IOMEM | + CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC; + ret = pcmcia_loop_config(pcmcia, softingcs_probe_config, (void *)pdat); + if (ret) + goto pcmcia_failed; + + ret = pcmcia_enable_device(pcmcia); + if (ret < 0) + goto pcmcia_failed; + + pres = pcmcia->resource[PCMCIA_IOMEM_0]; + if (!pres) { + ret = -EBADF; + goto pcmcia_bad; + } + + /* create softing platform device */ + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) { + ret = -ENOMEM; + goto mem_failed; + } + dev->pdev.resource = dev->res; + dev->pdev.num_resources = ARRAY_SIZE(dev->res); + dev->pdev.dev.release = softingcs_pdev_release; + + pdev = &dev->pdev; + pdev->dev.platform_data = (void *)pdat; + pdev->dev.parent = &pcmcia->dev; + pcmcia->priv = pdev; + + /* platform device resources */ + pdev->resource[0].flags = IORESOURCE_MEM; + pdev->resource[0].start = pres->start; + pdev->resource[0].end = pres->end; + + pdev->resource[1].flags = IORESOURCE_IRQ; + pdev->resource[1].start = pcmcia->irq; + pdev->resource[1].end = pdev->resource[1].start; + + /* platform device setup */ + spin_lock(&softingcs_index_lock); + pdev->id = softingcs_index++; + spin_unlock(&softingcs_index_lock); + pdev->name = "softing"; + dev_set_name(&pdev->dev, "softingcs.%i", pdev->id); + ret = platform_device_register(pdev); + if (ret < 0) + goto platform_failed; + + dev_info(&pcmcia->dev, "created %s\n", dev_name(&pdev->dev)); + return 0; + +platform_failed: + kfree(dev); +mem_failed: +pcmcia_bad: +pcmcia_failed: + pcmcia_disable_device(pcmcia); + pcmcia->priv = NULL; + return ret ?: -ENODEV; +} + +static /*const*/ struct pcmcia_device_id softingcs_ids[] = { + /* softing */ + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0001), + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0002), + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0004), + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0005), + /* vector, manufacturer? */ + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0081), + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0084), + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0085), + /* EDIC */ + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0102), + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0105), + PCMCIA_DEVICE_NULL, +}; + +MODULE_DEVICE_TABLE(pcmcia, softingcs_ids); + +static struct pcmcia_driver softingcs_driver = { + .owner = THIS_MODULE, + .name = "softingcs", + .id_table = softingcs_ids, + .probe = softingcs_probe, + .remove = __devexit_p(softingcs_remove), +}; + +static int __init softingcs_start(void) +{ + spin_lock_init(&softingcs_index_lock); + return pcmcia_register_driver(&softingcs_driver); +} + +static void __exit softingcs_stop(void) +{ + pcmcia_unregister_driver(&softingcs_driver); +} + +module_init(softingcs_start); +module_exit(softingcs_stop); + +MODULE_DESCRIPTION("softing CANcard driver" + ", links PCMCIA card to softing driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3-18-g5258 From 41135b1ca228b6ea1a0ab9d903dd54396ebd485d Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Fri, 21 Jan 2011 09:57:28 +0100 Subject: Staging: iio: Aditional fixpoint formatted output bugfix iio: Additional fixpoint formatted output bugfixes Fix some ADC/DAC drivers' _scale interface to correct fixpoint formatted output This patch adds the fixes to ad7887_core.c and ad5446.c Signed-off-by: Roland Stigge Signed-off-by: Greg Kroah-Hartman --- drivers/staging/iio/adc/ad7887_core.c | 2 +- drivers/staging/iio/dac/ad5446.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/staging/iio/adc/ad7887_core.c b/drivers/staging/iio/adc/ad7887_core.c index 685908995d4..5d85efab658 100644 --- a/drivers/staging/iio/adc/ad7887_core.c +++ b/drivers/staging/iio/adc/ad7887_core.c @@ -68,7 +68,7 @@ static ssize_t ad7887_show_scale(struct device *dev, /* Corresponds to Vref / 2^(bits) */ unsigned int scale_uv = (st->int_vref_mv * 1000) >> st->chip_info->bits; - return sprintf(buf, "%d.%d\n", scale_uv / 1000, scale_uv % 1000); + return sprintf(buf, "%d.%03d\n", scale_uv / 1000, scale_uv % 1000); } static IIO_DEVICE_ATTR(in_scale, S_IRUGO, ad7887_show_scale, NULL, 0); diff --git a/drivers/staging/iio/dac/ad5446.c b/drivers/staging/iio/dac/ad5446.c index e3387cd3114..0f87ecac82f 100644 --- a/drivers/staging/iio/dac/ad5446.c +++ b/drivers/staging/iio/dac/ad5446.c @@ -87,7 +87,7 @@ static ssize_t ad5446_show_scale(struct device *dev, /* Corresponds to Vref / 2^(bits) */ unsigned int scale_uv = (st->vref_mv * 1000) >> st->chip_info->bits; - return sprintf(buf, "%d.%d\n", scale_uv / 1000, scale_uv % 1000); + return sprintf(buf, "%d.%03d\n", scale_uv / 1000, scale_uv % 1000); } static IIO_DEVICE_ATTR(out_scale, S_IRUGO, ad5446_show_scale, NULL, 0); -- cgit v1.2.3-18-g5258 From d062d44a8386c82c06e483f0c0d1124ba3cab2c8 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Fri, 21 Jan 2011 13:34:15 +0100 Subject: staging: brcm80211: remove assert to avoid panic since 2.6.37 kernel The driver assumed it would receive skb packets from MAC80211 which are not cloned. To guard this assumption an assert was placed in the transmit routine. As of kernel 2.6.37 it turns out MAC80211 does pass skb packets that are cloned. The assert is also not needed as it does not lead to a failure state in our driver when the packet is cloned. Therefore the assert can safely be removed. > commit f8a0a781488ec7288d1049e5d2022850aa98f7b6 > Author: Felix Fietkau > Date: Sat Dec 18 19:30:50 2010 +0100 > > mac80211: fix potentially redundant skb data copying > > When an skb is shared, it needs to be duplicated, along with its data > If the skb does not have enough headroom, using skb_copy might cause t > buffer to be copied twice (once by skb_copy and once by pskb_expand_he > Fix this by using skb_clone initially and letting ieee80211_skb_resize > out the rest. > > Signed-off-by: Felix Fietkau > Signed-off-by: John W. Linville > Acked-by: Brett Rudley Signed-off-by: Arend van Spriel Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/brcm80211/sys/wlc_mac80211.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/staging/brcm80211/sys/wlc_mac80211.c b/drivers/staging/brcm80211/sys/wlc_mac80211.c index 1d5d01ac0a9..a1303863686 100644 --- a/drivers/staging/brcm80211/sys/wlc_mac80211.c +++ b/drivers/staging/brcm80211/sys/wlc_mac80211.c @@ -5126,7 +5126,6 @@ wlc_sendpkt_mac80211(struct wlc_info *wlc, struct sk_buff *sdu, fifo = prio2fifo[prio]; ASSERT((uint) skb_headroom(sdu) >= TXOFF); - ASSERT(!(sdu->cloned)); ASSERT(!(sdu->next)); ASSERT(!(sdu->prev)); ASSERT(fifo < NFIFO); -- cgit v1.2.3-18-g5258 From 4032ec639af9b735fdd903fab09de567bd73eaa0 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Fri, 21 Jan 2011 13:36:44 +0100 Subject: staging: brcm80211: fix suspend/resume issue in brcmsmac PCI PM suspend callback took down the interface and resume brought it back up. In the mac80211 context this is done in subsequent calls. Rework implementation so that suspend only stores config, and sets PCI power state. The resume return to full power state (D0), restores the config, and brings hardware back up. Full bringup is done by subsequent mac80211 calls. Reviewed-by: Brett Rudley Signed-off-by: Arend van Spriel Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/brcm80211/sys/wl_mac80211.c | 45 +++++++++++++++-------------- 1 file changed, 23 insertions(+), 22 deletions(-) diff --git a/drivers/staging/brcm80211/sys/wl_mac80211.c b/drivers/staging/brcm80211/sys/wl_mac80211.c index bdd629d72a7..f1235884cc5 100644 --- a/drivers/staging/brcm80211/sys/wl_mac80211.c +++ b/drivers/staging/brcm80211/sys/wl_mac80211.c @@ -209,11 +209,8 @@ static void wl_ops_stop(struct ieee80211_hw *hw) struct wl_info *wl = hw->priv; ASSERT(wl); WL_LOCK(wl); - wl_down(wl); ieee80211_stop_queues(hw); WL_UNLOCK(wl); - - return; } static int @@ -246,7 +243,14 @@ wl_ops_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) static void wl_ops_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) { - return; + struct wl_info *wl; + + wl = HW_TO_WL(hw); + + /* put driver in down state */ + WL_LOCK(wl); + wl_down(wl); + WL_UNLOCK(wl); } static int @@ -779,7 +783,7 @@ static struct wl_info *wl_attach(u16 vendor, u16 device, unsigned long regs, wl_found++; return wl; - fail: +fail: wl_free(wl); fail1: return NULL; @@ -1090,7 +1094,6 @@ wl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) return 0; } -#ifdef LINUXSTA_PS static int wl_suspend(struct pci_dev *pdev, pm_message_t state) { struct wl_info *wl; @@ -1105,11 +1108,12 @@ static int wl_suspend(struct pci_dev *pdev, pm_message_t state) return -ENODEV; } + /* only need to flag hw is down for proper resume */ WL_LOCK(wl); - wl_down(wl); wl->pub->hw_up = false; WL_UNLOCK(wl); - pci_save_state(pdev, wl->pci_psstate); + + pci_save_state(pdev); pci_disable_device(pdev); return pci_set_power_state(pdev, PCI_D3hot); } @@ -1133,7 +1137,7 @@ static int wl_resume(struct pci_dev *pdev) if (err) return err; - pci_restore_state(pdev, wl->pci_psstate); + pci_restore_state(pdev); err = pci_enable_device(pdev); if (err) @@ -1145,13 +1149,12 @@ static int wl_resume(struct pci_dev *pdev) if ((val & 0x0000ff00) != 0) pci_write_config_dword(pdev, 0x40, val & 0xffff00ff); - WL_LOCK(wl); - err = wl_up(wl); - WL_UNLOCK(wl); - + /* + * done. driver will be put in up state + * in wl_ops_add_interface() call. + */ return err; } -#endif /* LINUXSTA_PS */ static void wl_remove(struct pci_dev *pdev) { @@ -1184,14 +1187,12 @@ static void wl_remove(struct pci_dev *pdev) } static struct pci_driver wl_pci_driver = { - .name = "brcm80211", - .probe = wl_pci_probe, -#ifdef LINUXSTA_PS - .suspend = wl_suspend, - .resume = wl_resume, -#endif /* LINUXSTA_PS */ - .remove = __devexit_p(wl_remove), - .id_table = wl_id_table, + .name = "brcm80211", + .probe = wl_pci_probe, + .suspend = wl_suspend, + .resume = wl_resume, + .remove = __devexit_p(wl_remove), + .id_table = wl_id_table, }; /** -- cgit v1.2.3-18-g5258 From 233d84c46c2253d13e10b42d88c14748fbb67a98 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Thu, 20 Jan 2011 22:37:43 +0100 Subject: ALSA: Xonar, CS43xx: Don't overrun static array 'cs4398_regs' in 'struct xonar_cs43xx' is an array of 'u8' with a size of 8. So, this code in sound/pci/oxygen/xonar_cs43xx.c::dump_d1_registers() for (i = 2; i <= 8; ++i) snd_iprintf(buffer, " %02x", data->cs4398_regs[i]); will overrun the array when 'i == 8'. I guess that what's needed to fix it is the trivial patch below, but I must admit that I have no idea about this code, so I may very well be wrong. Additionally, I have no way to actually test this, so all I know is that the below compiles. Someone who actually knows this code should take a look before anything is comitted - consider the below (not much more than) a bug report. Signed-off-by: Jesper Juhl Acked-by: Clemens Ladisch --- sound/pci/oxygen/xonar_cs43xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/oxygen/xonar_cs43xx.c b/sound/pci/oxygen/xonar_cs43xx.c index 9f72d424969..252719101c4 100644 --- a/sound/pci/oxygen/xonar_cs43xx.c +++ b/sound/pci/oxygen/xonar_cs43xx.c @@ -392,7 +392,7 @@ static void dump_d1_registers(struct oxygen *chip, unsigned int i; snd_iprintf(buffer, "\nCS4398: 7?"); - for (i = 2; i <= 8; ++i) + for (i = 2; i < 8; ++i) snd_iprintf(buffer, " %02x", data->cs4398_regs[i]); snd_iprintf(buffer, "\n"); dump_cs4362a_registers(data, buffer); -- cgit v1.2.3-18-g5258 From 02b6b5b640e773eb4d4d0685fa6c1fbc660b2834 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Fri, 21 Jan 2011 13:27:39 +0100 Subject: ALSA: HDA: Refactor some redundant code for Conexant 5066/205xx Four very similar procedures - one for each model - now refactored into one. This isn't all duplicated code, but a step in the right direction. Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_conexant.c | 81 ++++++++++++------------------------------ 1 file changed, 23 insertions(+), 58 deletions(-) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 9bb030a469c..7cd59b9f0e9 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -2387,79 +2387,53 @@ static void cxt5066_hp_automute(struct hda_codec *codec) cxt5066_update_speaker(codec); } -/* unsolicited event for jack sensing */ -static void cxt5066_olpc_unsol_event(struct hda_codec *codec, unsigned int res) +/* Dispatch the right mic autoswitch function */ +static void cxt5066_automic(struct hda_codec *codec) { struct conexant_spec *spec = codec->spec; - snd_printdd("CXT5066: unsol event %x (%x)\n", res, res >> 26); - switch (res >> 26) { - case CONEXANT_HP_EVENT: - cxt5066_hp_automute(codec); - break; - case CONEXANT_MIC_EVENT: - /* ignore mic events in DC mode; we're always using the jack */ - if (!spec->dc_enable) - cxt5066_olpc_automic(codec); - break; - } -} -/* unsolicited event for jack sensing */ -static void cxt5066_vostro_event(struct hda_codec *codec, unsigned int res) -{ - snd_printdd("CXT5066_vostro: unsol event %x (%x)\n", res, res >> 26); - switch (res >> 26) { - case CONEXANT_HP_EVENT: - cxt5066_hp_automute(codec); - break; - case CONEXANT_MIC_EVENT: + if (spec->dell_vostro) cxt5066_vostro_automic(codec); - break; - } -} - -/* unsolicited event for jack sensing */ -static void cxt5066_ideapad_event(struct hda_codec *codec, unsigned int res) -{ - snd_printdd("CXT5066_ideapad: unsol event %x (%x)\n", res, res >> 26); - switch (res >> 26) { - case CONEXANT_HP_EVENT: - cxt5066_hp_automute(codec); - break; - case CONEXANT_MIC_EVENT: + else if (spec->ideapad) cxt5066_ideapad_automic(codec); - break; - } + else if (spec->thinkpad) + cxt5066_thinkpad_automic(codec); + else if (spec->hp_laptop) + cxt5066_hp_laptop_automic(codec); } /* unsolicited event for jack sensing */ -static void cxt5066_hp_laptop_event(struct hda_codec *codec, unsigned int res) +static void cxt5066_olpc_unsol_event(struct hda_codec *codec, unsigned int res) { - snd_printdd("CXT5066_hp_laptop: unsol event %x (%x)\n", res, res >> 26); + struct conexant_spec *spec = codec->spec; + snd_printdd("CXT5066: unsol event %x (%x)\n", res, res >> 26); switch (res >> 26) { case CONEXANT_HP_EVENT: cxt5066_hp_automute(codec); break; case CONEXANT_MIC_EVENT: - cxt5066_hp_laptop_automic(codec); + /* ignore mic events in DC mode; we're always using the jack */ + if (!spec->dc_enable) + cxt5066_olpc_automic(codec); break; } } /* unsolicited event for jack sensing */ -static void cxt5066_thinkpad_event(struct hda_codec *codec, unsigned int res) +static void cxt5066_unsol_event(struct hda_codec *codec, unsigned int res) { - snd_printdd("CXT5066_thinkpad: unsol event %x (%x)\n", res, res >> 26); + snd_printdd("CXT5066: unsol event %x (%x)\n", res, res >> 26); switch (res >> 26) { case CONEXANT_HP_EVENT: cxt5066_hp_automute(codec); break; case CONEXANT_MIC_EVENT: - cxt5066_thinkpad_automic(codec); + cxt5066_automic(codec); break; } } + static const struct hda_input_mux cxt5066_analog_mic_boost = { .num_items = 5, .items = { @@ -3039,20 +3013,11 @@ static struct hda_verb cxt5066_init_verbs_hp_laptop[] = { /* initialize jack-sensing, too */ static int cxt5066_init(struct hda_codec *codec) { - struct conexant_spec *spec = codec->spec; - snd_printdd("CXT5066: init\n"); conexant_init(codec); if (codec->patch_ops.unsol_event) { cxt5066_hp_automute(codec); - if (spec->dell_vostro) - cxt5066_vostro_automic(codec); - else if (spec->ideapad) - cxt5066_ideapad_automic(codec); - else if (spec->thinkpad) - cxt5066_thinkpad_automic(codec); - else if (spec->hp_laptop) - cxt5066_hp_laptop_automic(codec); + cxt5066_automic(codec); } cxt5066_set_mic_boost(codec); return 0; @@ -3169,7 +3134,7 @@ static int patch_cxt5066(struct hda_codec *codec) break; case CXT5066_HP_LAPTOP: codec->patch_ops.init = cxt5066_init; - codec->patch_ops.unsol_event = cxt5066_hp_laptop_event; + codec->patch_ops.unsol_event = cxt5066_unsol_event; spec->init_verbs[spec->num_init_verbs] = cxt5066_init_verbs_hp_laptop; spec->num_init_verbs++; @@ -3207,7 +3172,7 @@ static int patch_cxt5066(struct hda_codec *codec) break; case CXT5066_DELL_VOSTRO: codec->patch_ops.init = cxt5066_init; - codec->patch_ops.unsol_event = cxt5066_vostro_event; + codec->patch_ops.unsol_event = cxt5066_unsol_event; spec->init_verbs[0] = cxt5066_init_verbs_vostro; spec->mixers[spec->num_mixers++] = cxt5066_mixer_master_olpc; spec->mixers[spec->num_mixers++] = cxt5066_mixers; @@ -3224,7 +3189,7 @@ static int patch_cxt5066(struct hda_codec *codec) break; case CXT5066_IDEAPAD: codec->patch_ops.init = cxt5066_init; - codec->patch_ops.unsol_event = cxt5066_ideapad_event; + codec->patch_ops.unsol_event = cxt5066_unsol_event; spec->mixers[spec->num_mixers++] = cxt5066_mixer_master; spec->mixers[spec->num_mixers++] = cxt5066_mixers; spec->init_verbs[0] = cxt5066_init_verbs_ideapad; @@ -3240,7 +3205,7 @@ static int patch_cxt5066(struct hda_codec *codec) break; case CXT5066_THINKPAD: codec->patch_ops.init = cxt5066_init; - codec->patch_ops.unsol_event = cxt5066_thinkpad_event; + codec->patch_ops.unsol_event = cxt5066_unsol_event; spec->mixers[spec->num_mixers++] = cxt5066_mixer_master; spec->mixers[spec->num_mixers++] = cxt5066_mixers; spec->init_verbs[0] = cxt5066_init_verbs_thinkpad; -- cgit v1.2.3-18-g5258 From a1d6906e2d2b4655e248f490ab088c27876a600a Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Fri, 21 Jan 2011 13:33:28 +0100 Subject: ALSA: HDA: Add a new model "asus" for Conexant 5066/205xx BugLink: http://bugs.launchpad.net/bugs/701271 This new model, named "asus", is identical to the "hp_laptop" model, except for the location of the internal mic, which is at pin 0x1a. It is used for Asus K52JU and Lenovo G560. Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio-Models.txt | 1 + sound/pci/hda/patch_conexant.c | 24 +++++++++++++++++++++++- 2 files changed, 24 insertions(+), 1 deletion(-) diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index 16ae4300c74..0caf77e59be 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -296,6 +296,7 @@ Conexant 5066 ============= laptop Basic Laptop config (default) hp-laptop HP laptops, e g G60 + asus Asus K52JU, Lenovo G560 dell-laptop Dell laptops dell-vostro Dell Vostro olpc-xo-1_5 OLPC XO 1.5 diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 7cd59b9f0e9..19f0daf6497 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -127,6 +127,7 @@ struct conexant_spec { unsigned int ideapad:1; unsigned int thinkpad:1; unsigned int hp_laptop:1; + unsigned int asus:1; unsigned int ext_mic_present; unsigned int recording; @@ -2312,6 +2313,19 @@ static void cxt5066_ideapad_automic(struct hda_codec *codec) } } + +/* toggle input of built-in digital mic and mic jack appropriately */ +static void cxt5066_asus_automic(struct hda_codec *codec) +{ + unsigned int present; + + present = snd_hda_jack_detect(codec, 0x1b); + snd_printdd("CXT5066: external microphone present=%d\n", present); + snd_hda_codec_write(codec, 0x17, 0, AC_VERB_SET_CONNECT_SEL, + present ? 1 : 0); +} + + /* toggle input of built-in digital mic and mic jack appropriately */ static void cxt5066_hp_laptop_automic(struct hda_codec *codec) { @@ -2400,6 +2414,8 @@ static void cxt5066_automic(struct hda_codec *codec) cxt5066_thinkpad_automic(codec); else if (spec->hp_laptop) cxt5066_hp_laptop_automic(codec); + else if (spec->asus) + cxt5066_asus_automic(codec); } /* unsolicited event for jack sensing */ @@ -3045,6 +3061,7 @@ enum { CXT5066_DELL_VOSTRO, /* Dell Vostro 1015i */ CXT5066_IDEAPAD, /* Lenovo IdeaPad U150 */ CXT5066_THINKPAD, /* Lenovo ThinkPad T410s, others? */ + CXT5066_ASUS, /* Asus K52JU, Lenovo G560 - Int mic at 0x1a and Ext mic at 0x1b */ CXT5066_HP_LAPTOP, /* HP Laptop */ CXT5066_MODELS }; @@ -3056,6 +3073,7 @@ static const char * const cxt5066_models[CXT5066_MODELS] = { [CXT5066_DELL_VOSTRO] = "dell-vostro", [CXT5066_IDEAPAD] = "ideapad", [CXT5066_THINKPAD] = "thinkpad", + [CXT5066_ASUS] = "asus", [CXT5066_HP_LAPTOP] = "hp-laptop", }; @@ -3068,6 +3086,7 @@ static struct snd_pci_quirk cxt5066_cfg_tbl[] = { SND_PCI_QUIRK(0x1028, 0x0408, "Dell Inspiron One 19T", CXT5066_IDEAPAD), SND_PCI_QUIRK(0x103c, 0x360b, "HP G60", CXT5066_HP_LAPTOP), SND_PCI_QUIRK(0x1043, 0x13f3, "Asus A52J", CXT5066_HP_LAPTOP), + SND_PCI_QUIRK(0x1043, 0x1643, "Asus K52JU", CXT5066_ASUS), SND_PCI_QUIRK(0x1179, 0xff1e, "Toshiba Satellite C650D", CXT5066_IDEAPAD), SND_PCI_QUIRK(0x1179, 0xff50, "Toshiba Satellite P500-PSPGSC-01800T", CXT5066_OLPC_XO_1_5), SND_PCI_QUIRK(0x1179, 0xffe0, "Toshiba Satellite Pro T130-15F", CXT5066_OLPC_XO_1_5), @@ -3077,6 +3096,7 @@ static struct snd_pci_quirk cxt5066_cfg_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x20f2, "Lenovo T400s", CXT5066_THINKPAD), SND_PCI_QUIRK(0x17aa, 0x21c5, "Thinkpad Edge 13", CXT5066_THINKPAD), SND_PCI_QUIRK(0x17aa, 0x215e, "Lenovo Thinkpad", CXT5066_THINKPAD), + SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo G560", CXT5066_ASUS), SND_PCI_QUIRK_VENDOR(0x17aa, "Lenovo", CXT5066_IDEAPAD), /* Fallback for Lenovos without dock mic */ {} }; @@ -3132,13 +3152,15 @@ static int patch_cxt5066(struct hda_codec *codec) spec->num_init_verbs++; spec->dell_automute = 1; break; + case CXT5066_ASUS: case CXT5066_HP_LAPTOP: codec->patch_ops.init = cxt5066_init; codec->patch_ops.unsol_event = cxt5066_unsol_event; spec->init_verbs[spec->num_init_verbs] = cxt5066_init_verbs_hp_laptop; spec->num_init_verbs++; - spec->hp_laptop = 1; + spec->hp_laptop = board_config == CXT5066_HP_LAPTOP; + spec->asus = board_config == CXT5066_ASUS; spec->mixers[spec->num_mixers++] = cxt5066_mixer_master; spec->mixers[spec->num_mixers++] = cxt5066_mixers; /* no S/PDIF out */ -- cgit v1.2.3-18-g5258 From cae41118f50ef0c431e13159df6d7dd8bbd54004 Mon Sep 17 00:00:00 2001 From: Richard Schütz Date: Sun, 19 Dec 2010 21:18:38 +0100 Subject: USB: usb-storage: unusual_devs update for Cypress ATACB MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit New device ID added for unusual Cypress ATACB device. Signed-off-by: Richard Schütz Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_cypress.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/usb/storage/unusual_cypress.h b/drivers/usb/storage/unusual_cypress.h index c854fdebe0a..2c855302622 100644 --- a/drivers/usb/storage/unusual_cypress.h +++ b/drivers/usb/storage/unusual_cypress.h @@ -31,4 +31,9 @@ UNUSUAL_DEV( 0x04b4, 0x6831, 0x0000, 0x9999, "Cypress ISD-300LP", USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0), +UNUSUAL_DEV( 0x14cd, 0x6116, 0x0000, 0x9999, + "Super Top", + "USB 2.0 SATA BRIDGE", + USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0), + #endif /* defined(CONFIG_USB_STORAGE_CYPRESS_ATACB) || ... */ -- cgit v1.2.3-18-g5258 From 7e1e7bd9dbd469267b6e6de1bf8d71a7d65ce86a Mon Sep 17 00:00:00 2001 From: Richard Schütz Date: Wed, 22 Dec 2010 14:28:56 +0100 Subject: USB: usb-storage: unusual_devs update for TrekStor DataStation maxi g.u external hard drive enclosure MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The TrekStor DataStation maxi g.u external hard drive enclosure uses a JMicron USB to SATA chip which needs the US_FL_IGNORE_RESIDUE flag to work properly. Signed-off-by: Richard Schütz Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index fcc1e32ce25..2e630e6fada 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1872,6 +1872,15 @@ UNUSUAL_DEV( 0x1908, 0x3335, 0x0200, 0x0200, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_READ_DISC_INFO ), +/* Patch by Richard Schtz + * This external hard drive enclosure uses a JMicron chip which + * needs the US_FL_IGNORE_RESIDUE flag to work properly. */ +UNUSUAL_DEV( 0x1e68, 0x001b, 0x0000, 0x0000, + "TrekStor GmbH & Co. KG", + "DataStation maxi g.u", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ), + UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001, "ST", "2A", -- cgit v1.2.3-18-g5258 From a58861fbde2a350df4d27fc62fb42905669b37ce Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 31 Dec 2010 10:51:51 -0600 Subject: USB: qcaux: add Pantech UML290 device ID Another CDC-ACM + vendor specific interface layout for the QCDM port. Signed-off-by: Dan Williams Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/qcaux.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c index 214a3e50429..b53865b8cd9 100644 --- a/drivers/usb/serial/qcaux.c +++ b/drivers/usb/serial/qcaux.c @@ -36,6 +36,7 @@ #define UTSTARCOM_PRODUCT_UM175_V1 0x3712 #define UTSTARCOM_PRODUCT_UM175_V2 0x3714 #define UTSTARCOM_PRODUCT_UM175_ALLTEL 0x3715 +#define PANTECH_PRODUCT_UML290_VZW 0x3718 /* CMOTECH devices */ #define CMOTECH_VENDOR_ID 0x16d8 @@ -66,6 +67,7 @@ static struct usb_device_id id_table[] = { { USB_DEVICE_AND_INTERFACE_INFO(LG_VENDOR_ID, LG_PRODUCT_VX4400_6000, 0xff, 0xff, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(SANYO_VENDOR_ID, SANYO_PRODUCT_KATANA_LX, 0xff, 0xff, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_U520, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xff, 0xff) }, { }, }; MODULE_DEVICE_TABLE(usb, id_table); -- cgit v1.2.3-18-g5258 From faea63f7ccfddfb8fc19798799fcd38c58415172 Mon Sep 17 00:00:00 2001 From: Craig Shelley Date: Sun, 2 Jan 2011 21:51:46 +0000 Subject: USB: CP210x Add two device IDs Device Ids added for IRZ Automation Teleport SG-10 GSM/GPRS Modem and DekTec DTA Plus VHF/UHF Booster/Attenuator. Signed-off-by: Craig Shelley Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp210x.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 8d7731dbf47..f5fe0ed1a48 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -110,7 +110,9 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ { USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */ { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */ + { USB_DEVICE(0x10C4, 0x83D8) }, /* DekTec DTA Plus VHF/UHF Booster/Attenuator */ { USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */ + { USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */ { USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */ { USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ -- cgit v1.2.3-18-g5258 From 9926c0df7b31b2128eebe92e0e2b052f380ea464 Mon Sep 17 00:00:00 2001 From: Craig Shelley Date: Sun, 2 Jan 2011 21:59:08 +0000 Subject: USB: CP210x Removed incorrect device ID Device ID removed 0x10C4/0x8149 for West Mountain Radio Computerized Battery Analyzer. This device is actually based on a SiLabs C8051Fxxx, see http://www.etheus.net/SiUSBXp_Linux_Driver for further info. Signed-off-by: Craig Shelley Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp210x.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index f5fe0ed1a48..c3bea46e87f 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -87,7 +87,6 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */ { USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */ { USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */ - { USB_DEVICE(0x10C4, 0x8149) }, /* West Mountain Radio Computerized Battery Analyzer */ { USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */ { USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */ { USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */ -- cgit v1.2.3-18-g5258 From 12f68c480c7155a66bd2a76ab2fef28dd5f93fa2 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 3 Jan 2011 16:47:49 -0500 Subject: USB: usb-storage: unusual_devs entry for CamSport Evo This patch (as1438) adds an unusual_devs entry for the MagicPixel FW_Omega2 chip, used in the CamSport Evo camera. The firmware incorrectly reports a vendor-specific bDeviceClass. Signed-off-by: Alan Stern Reported-by: Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 2e630e6fada..24bd5d7c3de 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1044,6 +1044,15 @@ UNUSUAL_DEV( 0x084d, 0x0011, 0x0110, 0x0110, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_BULK32), +/* Reported by + * The device reports a vendor-specific device class, requiring an + * explicit vendor/product match. + */ +UNUSUAL_DEV( 0x0851, 0x1542, 0x0002, 0x0002, + "MagicPixel", + "FW_Omega2", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0), + /* Andrew Lunn * PanDigital Digital Picture Frame. Does not like ALLOW_MEDIUM_REMOVAL * on LUN 4. -- cgit v1.2.3-18-g5258 From 1e4cba8bd2cddd10849e769ff502e255c27c81b4 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 20 Dec 2010 21:54:30 -0200 Subject: usb: otg: Make USB3319 ULPI ID generic On a system with a USB3317 ULPI transceiver the following message is shown on kernel boot: ULPI transceiver vendor/product ID 0x0424/0x0006 Found SMSC USB3319 ULPI transceiver. ULPI integrity check: passed. The reason is that USB3317 has the same vendor/product ID as USB3319. Make the ULPI ID generic for the USB331x transceivers. Signed-off-by: Fabio Estevam Acked-by: Igor Grinberg Signed-off-by: Greg Kroah-Hartman --- drivers/usb/otg/ulpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/otg/ulpi.c b/drivers/usb/otg/ulpi.c index 059d9ac0ab5..770d799d5af 100644 --- a/drivers/usb/otg/ulpi.c +++ b/drivers/usb/otg/ulpi.c @@ -45,7 +45,7 @@ struct ulpi_info { /* ULPI hardcoded IDs, used for probing */ static struct ulpi_info ulpi_ids[] = { ULPI_INFO(ULPI_ID(0x04cc, 0x1504), "NXP ISP1504"), - ULPI_INFO(ULPI_ID(0x0424, 0x0006), "SMSC USB3319"), + ULPI_INFO(ULPI_ID(0x0424, 0x0006), "SMSC USB331x"), }; static int ulpi_set_otg_flags(struct otg_transceiver *otg) -- cgit v1.2.3-18-g5258 From baab93afc2844b68d57b0dcca5e1d34c5d7cf411 Mon Sep 17 00:00:00 2001 From: Alex He Date: Tue, 21 Dec 2010 17:45:46 +0800 Subject: USB: EHCI: ASPM quirk of ISOC on AMD Hudson AMD Hudson also needs the same ASPM quirk as SB800 Signed-off-by: Alex He Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-pci.c | 33 ++++++++++++++++++++------------- 1 file changed, 20 insertions(+), 13 deletions(-) diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 76179c39c0e..bed07d4aab0 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -44,28 +44,35 @@ static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev) return 0; } -static int ehci_quirk_amd_SB800(struct ehci_hcd *ehci) +static int ehci_quirk_amd_hudson(struct ehci_hcd *ehci) { struct pci_dev *amd_smbus_dev; u8 rev = 0; amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, 0x4385, NULL); - if (!amd_smbus_dev) - return 0; - - pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev); - if (rev < 0x40) { - pci_dev_put(amd_smbus_dev); - amd_smbus_dev = NULL; - return 0; + if (amd_smbus_dev) { + pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev); + if (rev < 0x40) { + pci_dev_put(amd_smbus_dev); + amd_smbus_dev = NULL; + return 0; + } + } else { + amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x780b, NULL); + if (!amd_smbus_dev) + return 0; + pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev); + if (rev < 0x11 || rev > 0x18) { + pci_dev_put(amd_smbus_dev); + amd_smbus_dev = NULL; + return 0; + } } if (!amd_nb_dev) amd_nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x1510, NULL); - if (!amd_nb_dev) - ehci_err(ehci, "QUIRK: unable to get AMD NB device\n"); - ehci_info(ehci, "QUIRK: Enable AMD SB800 L1 fix\n"); + ehci_info(ehci, "QUIRK: Enable exception for AMD Hudson ASPM\n"); pci_dev_put(amd_smbus_dev); amd_smbus_dev = NULL; @@ -131,7 +138,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd) /* cache this readonly data; minimize chip reads */ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); - if (ehci_quirk_amd_SB800(ehci)) + if (ehci_quirk_amd_hudson(ehci)) ehci->amd_l1_fix = 1; retval = ehci_halt(ehci); -- cgit v1.2.3-18-g5258 From 952eca0a95e27660f7a56a7186b9bd09d791ced4 Mon Sep 17 00:00:00 2001 From: Melchior FRANZ Date: Wed, 22 Dec 2010 13:55:24 +0100 Subject: USB: DL100B webmail notifier: initialize return value If case of an unknown usb_device_id->driver_info (which could only occur if the info got corrupted somewhere outside the usbled driver), a debug message depended on an uninitialized value. This was harmless, but ugly, and gets fixed with this patch. Signed-off-by: Melchior FRANZ Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/usbled.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c index 1732d9bc097..1616ad1793a 100644 --- a/drivers/usb/misc/usbled.c +++ b/drivers/usb/misc/usbled.c @@ -45,7 +45,7 @@ struct usb_led { static void change_color(struct usb_led *led) { - int retval; + int retval = 0; unsigned char *buffer; buffer = kmalloc(8, GFP_KERNEL); -- cgit v1.2.3-18-g5258 From 0cdfb819b6a97e79c7a0aa0c471cd7000367103b Mon Sep 17 00:00:00 2001 From: David Sterba Date: Mon, 27 Dec 2010 18:49:58 +0100 Subject: USB: cdc-wdm: fix misuse of logical operation in place of bitop CC: Greg Kroah-Hartman CC: Oliver Neukum CC: Marcel Holtmann Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-wdm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 6ee4451bfe2..47085e5879a 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -342,7 +342,7 @@ static ssize_t wdm_write goto outnp; } - if (!file->f_flags && O_NONBLOCK) + if (!(file->f_flags & O_NONBLOCK)) r = wait_event_interruptible(desc->wait, !test_bit(WDM_IN_USE, &desc->flags)); else -- cgit v1.2.3-18-g5258 From 20831ad23978d0543b0b23128621b6d8ee7757f1 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 4 Jan 2011 20:21:32 +0800 Subject: usb: otg: nop: fix oops triggered by otg_register_notifier This patch adds BLOCKING_INIT_NOTIFIER_HEAD in nop_usb_xceiv_probe, so that we can avoid oops caused by uninitialized nop->otg.notifier.rwsem which will be touched in otg_register_notifier path. Reported-by: Gupta, Ajay Kumar Tested-by: Gupta, Ajay Kumar Cc: Balbi, Felipe Cc: David Brownell Signed-off-by: Ming Lei Signed-off-by: Greg Kroah-Hartman --- drivers/usb/otg/nop-usb-xceiv.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c index e70014ab097..8acf165fe13 100644 --- a/drivers/usb/otg/nop-usb-xceiv.c +++ b/drivers/usb/otg/nop-usb-xceiv.c @@ -132,6 +132,8 @@ static int __devinit nop_usb_xceiv_probe(struct platform_device *pdev) platform_set_drvdata(pdev, nop); + BLOCKING_INIT_NOTIFIER_HEAD(&nop->otg.notifier); + return 0; exit: kfree(nop); -- cgit v1.2.3-18-g5258 From 956227120f2e8eed8ca459879d7eafee78591cc1 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Wed, 5 Jan 2011 14:50:54 +0800 Subject: usb: set ep_dev async suspend should be later than device_initialize The dev->power.async_suspend can only be set at the condition of dev->power.status is DPM_ON. The dev->power.status will be initialized as DPM_ON at device_initialize. Signed-off-by: Peter Chen Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/endpoint.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c index 9da25056302..df502a98d0d 100644 --- a/drivers/usb/core/endpoint.c +++ b/drivers/usb/core/endpoint.c @@ -192,12 +192,12 @@ int usb_create_ep_devs(struct device *parent, ep_dev->dev.parent = parent; ep_dev->dev.release = ep_device_release; dev_set_name(&ep_dev->dev, "ep_%02x", endpoint->desc.bEndpointAddress); - device_enable_async_suspend(&ep_dev->dev); retval = device_register(&ep_dev->dev); if (retval) goto error_register; + device_enable_async_suspend(&ep_dev->dev); endpoint->ep_dev = ep_dev; return retval; -- cgit v1.2.3-18-g5258 From abab0c67c061612cf559ab27ce1340774d7c292d Mon Sep 17 00:00:00 2001 From: Toshiharu Okada Date: Wed, 29 Dec 2010 10:07:33 +0900 Subject: usb: pch_udc: Fixed issue which does not work with g_serial This PCH_UDC driver does not work normally when "Serial gadget" is used. The receiving data of control transmission (EP0 Control OUT Transaction) has not received correctly. This patch fixed this issue. The following was modified. - The buffer size. - The change processing of a receiving buffer (The temporary buffer and the buffer prepared by gadget). - The setup processing of a DMA descriptor. Currently the PCH_UDC driver can work normally with "Serial gadget" or "File-backed Storage Gadget". Signed-off-by: Toshiharu Okada Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/pch_udc.c | 117 +++++++++++++++++++++++++------------------ 1 file changed, 67 insertions(+), 50 deletions(-) diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c index 0c8dd81dddc..dfe927b01ff 100644 --- a/drivers/usb/gadget/pch_udc.c +++ b/drivers/usb/gadget/pch_udc.c @@ -198,10 +198,10 @@ #define PCH_UDC_BRLEN 0x0F /* Burst length */ #define PCH_UDC_THLEN 0x1F /* Threshold length */ /* Value of EP Buffer Size */ -#define UDC_EP0IN_BUFF_SIZE 64 -#define UDC_EPIN_BUFF_SIZE 512 -#define UDC_EP0OUT_BUFF_SIZE 64 -#define UDC_EPOUT_BUFF_SIZE 512 +#define UDC_EP0IN_BUFF_SIZE 16 +#define UDC_EPIN_BUFF_SIZE 256 +#define UDC_EP0OUT_BUFF_SIZE 16 +#define UDC_EPOUT_BUFF_SIZE 256 /* Value of EP maximum packet size */ #define UDC_EP0IN_MAX_PKT_SIZE 64 #define UDC_EP0OUT_MAX_PKT_SIZE 64 @@ -351,7 +351,7 @@ struct pch_udc_dev { struct pci_pool *data_requests; struct pci_pool *stp_requests; dma_addr_t dma_addr; - unsigned long ep0out_buf[64]; + void *ep0out_buf; struct usb_ctrlrequest setup_data; unsigned long phys_addr; void __iomem *base_addr; @@ -1219,11 +1219,11 @@ static void complete_req(struct pch_udc_ep *ep, struct pch_udc_request *req, dev = ep->dev; if (req->dma_mapped) { if (ep->in) - pci_unmap_single(dev->pdev, req->req.dma, - req->req.length, PCI_DMA_TODEVICE); + dma_unmap_single(&dev->pdev->dev, req->req.dma, + req->req.length, DMA_TO_DEVICE); else - pci_unmap_single(dev->pdev, req->req.dma, - req->req.length, PCI_DMA_FROMDEVICE); + dma_unmap_single(&dev->pdev->dev, req->req.dma, + req->req.length, DMA_FROM_DEVICE); req->dma_mapped = 0; req->req.dma = DMA_ADDR_INVALID; } @@ -1414,7 +1414,6 @@ static void pch_udc_start_rxrequest(struct pch_udc_ep *ep, pch_udc_clear_dma(ep->dev, DMA_DIR_RX); td_data = req->td_data; - ep->td_data = req->td_data; /* Set the status bits for all descriptors */ while (1) { td_data->status = (td_data->status & ~PCH_UDC_BUFF_STS) | @@ -1613,15 +1612,19 @@ static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq, if (usbreq->length && ((usbreq->dma == DMA_ADDR_INVALID) || !usbreq->dma)) { if (ep->in) - usbreq->dma = pci_map_single(dev->pdev, usbreq->buf, - usbreq->length, PCI_DMA_TODEVICE); + usbreq->dma = dma_map_single(&dev->pdev->dev, + usbreq->buf, + usbreq->length, + DMA_TO_DEVICE); else - usbreq->dma = pci_map_single(dev->pdev, usbreq->buf, - usbreq->length, PCI_DMA_FROMDEVICE); + usbreq->dma = dma_map_single(&dev->pdev->dev, + usbreq->buf, + usbreq->length, + DMA_FROM_DEVICE); req->dma_mapped = 1; } if (usbreq->length > 0) { - retval = prepare_dma(ep, req, gfp); + retval = prepare_dma(ep, req, GFP_ATOMIC); if (retval) goto probe_end; } @@ -1646,7 +1649,6 @@ static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq, pch_udc_wait_ep_stall(ep); pch_udc_ep_clear_nak(ep); pch_udc_enable_ep_interrupts(ep->dev, (1 << ep->num)); - pch_udc_set_dma(dev, DMA_DIR_TX); } } /* Now add this request to the ep's pending requests */ @@ -1926,6 +1928,7 @@ static void pch_udc_complete_receiver(struct pch_udc_ep *ep) PCH_UDC_BS_DMA_DONE) return; pch_udc_clear_dma(ep->dev, DMA_DIR_RX); + pch_udc_ep_set_ddptr(ep, 0); if ((req->td_data_last->status & PCH_UDC_RXTX_STS) != PCH_UDC_RTS_SUCC) { dev_err(&dev->pdev->dev, "Invalid RXTX status (0x%08x) " @@ -1963,7 +1966,7 @@ static void pch_udc_svc_data_in(struct pch_udc_dev *dev, int ep_num) u32 epsts; struct pch_udc_ep *ep; - ep = &dev->ep[2*ep_num]; + ep = &dev->ep[UDC_EPIN_IDX(ep_num)]; epsts = ep->epsts; ep->epsts = 0; @@ -2008,7 +2011,7 @@ static void pch_udc_svc_data_out(struct pch_udc_dev *dev, int ep_num) struct pch_udc_ep *ep; struct pch_udc_request *req = NULL; - ep = &dev->ep[2*ep_num + 1]; + ep = &dev->ep[UDC_EPOUT_IDX(ep_num)]; epsts = ep->epsts; ep->epsts = 0; @@ -2025,10 +2028,11 @@ static void pch_udc_svc_data_out(struct pch_udc_dev *dev, int ep_num) } if (epsts & UDC_EPSTS_HE) return; - if (epsts & UDC_EPSTS_RSS) + if (epsts & UDC_EPSTS_RSS) { pch_udc_ep_set_stall(ep); pch_udc_enable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num)); + } if (epsts & UDC_EPSTS_RCS) { if (!dev->prot_stall) { pch_udc_ep_clear_stall(ep); @@ -2060,8 +2064,10 @@ static void pch_udc_svc_control_in(struct pch_udc_dev *dev) { u32 epsts; struct pch_udc_ep *ep; + struct pch_udc_ep *ep_out; ep = &dev->ep[UDC_EP0IN_IDX]; + ep_out = &dev->ep[UDC_EP0OUT_IDX]; epsts = ep->epsts; ep->epsts = 0; @@ -2073,8 +2079,16 @@ static void pch_udc_svc_control_in(struct pch_udc_dev *dev) return; if (epsts & UDC_EPSTS_HE) return; - if ((epsts & UDC_EPSTS_TDC) && (!dev->stall)) + if ((epsts & UDC_EPSTS_TDC) && (!dev->stall)) { pch_udc_complete_transfer(ep); + pch_udc_clear_dma(dev, DMA_DIR_RX); + ep_out->td_data->status = (ep_out->td_data->status & + ~PCH_UDC_BUFF_STS) | + PCH_UDC_BS_HST_RDY; + pch_udc_ep_clear_nak(ep_out); + pch_udc_set_dma(dev, DMA_DIR_RX); + pch_udc_ep_set_rrdy(ep_out); + } /* On IN interrupt, provide data if we have any */ if ((epsts & UDC_EPSTS_IN) && !(epsts & UDC_EPSTS_TDC) && !(epsts & UDC_EPSTS_TXEMPTY)) @@ -2102,11 +2116,9 @@ static void pch_udc_svc_control_out(struct pch_udc_dev *dev) dev->stall = 0; dev->ep[UDC_EP0IN_IDX].halted = 0; dev->ep[UDC_EP0OUT_IDX].halted = 0; - /* In data not ready */ - pch_udc_ep_set_nak(&(dev->ep[UDC_EP0IN_IDX])); dev->setup_data = ep->td_stp->request; pch_udc_init_setup_buff(ep->td_stp); - pch_udc_clear_dma(dev, DMA_DIR_TX); + pch_udc_clear_dma(dev, DMA_DIR_RX); pch_udc_ep_fifo_flush(&(dev->ep[UDC_EP0IN_IDX]), dev->ep[UDC_EP0IN_IDX].in); if ((dev->setup_data.bRequestType & USB_DIR_IN)) @@ -2122,14 +2134,23 @@ static void pch_udc_svc_control_out(struct pch_udc_dev *dev) setup_supported = dev->driver->setup(&dev->gadget, &dev->setup_data); spin_lock(&dev->lock); + + if (dev->setup_data.bRequestType & USB_DIR_IN) { + ep->td_data->status = (ep->td_data->status & + ~PCH_UDC_BUFF_STS) | + PCH_UDC_BS_HST_RDY; + pch_udc_ep_set_ddptr(ep, ep->td_data_phys); + } /* ep0 in returns data on IN phase */ if (setup_supported >= 0 && setup_supported < UDC_EP0IN_MAX_PKT_SIZE) { pch_udc_ep_clear_nak(&(dev->ep[UDC_EP0IN_IDX])); /* Gadget would have queued a request when * we called the setup */ - pch_udc_set_dma(dev, DMA_DIR_RX); - pch_udc_ep_clear_nak(ep); + if (!(dev->setup_data.bRequestType & USB_DIR_IN)) { + pch_udc_set_dma(dev, DMA_DIR_RX); + pch_udc_ep_clear_nak(ep); + } } else if (setup_supported < 0) { /* if unsupported request, then stall */ pch_udc_ep_set_stall(&(dev->ep[UDC_EP0IN_IDX])); @@ -2142,22 +2163,13 @@ static void pch_udc_svc_control_out(struct pch_udc_dev *dev) } } else if ((((stat & UDC_EPSTS_OUT_MASK) >> UDC_EPSTS_OUT_SHIFT) == UDC_EPSTS_OUT_DATA) && !dev->stall) { - if (list_empty(&ep->queue)) { - dev_err(&dev->pdev->dev, "%s: No request\n", __func__); - ep->td_data->status = (ep->td_data->status & - ~PCH_UDC_BUFF_STS) | - PCH_UDC_BS_HST_RDY; - pch_udc_set_dma(dev, DMA_DIR_RX); - } else { - /* control write */ - /* next function will pickuo an clear the status */ + pch_udc_clear_dma(dev, DMA_DIR_RX); + pch_udc_ep_set_ddptr(ep, 0); + if (!list_empty(&ep->queue)) { ep->epsts = stat; - - pch_udc_svc_data_out(dev, 0); - /* re-program desc. pointer for possible ZLPs */ - pch_udc_ep_set_ddptr(ep, ep->td_data_phys); - pch_udc_set_dma(dev, DMA_DIR_RX); + pch_udc_svc_data_out(dev, PCH_UDC_EP0); } + pch_udc_set_dma(dev, DMA_DIR_RX); } pch_udc_ep_set_rrdy(ep); } @@ -2174,7 +2186,7 @@ static void pch_udc_postsvc_epinters(struct pch_udc_dev *dev, int ep_num) struct pch_udc_ep *ep; struct pch_udc_request *req; - ep = &dev->ep[2*ep_num]; + ep = &dev->ep[UDC_EPIN_IDX(ep_num)]; if (!list_empty(&ep->queue)) { req = list_entry(ep->queue.next, struct pch_udc_request, queue); pch_udc_enable_ep_interrupts(ep->dev, @@ -2196,13 +2208,13 @@ static void pch_udc_read_all_epstatus(struct pch_udc_dev *dev, u32 ep_intr) for (i = 0; i < PCH_UDC_USED_EP_NUM; i++) { /* IN */ if (ep_intr & (0x1 << i)) { - ep = &dev->ep[2*i]; + ep = &dev->ep[UDC_EPIN_IDX(i)]; ep->epsts = pch_udc_read_ep_status(ep); pch_udc_clear_ep_status(ep, ep->epsts); } /* OUT */ if (ep_intr & (0x10000 << i)) { - ep = &dev->ep[2*i+1]; + ep = &dev->ep[UDC_EPOUT_IDX(i)]; ep->epsts = pch_udc_read_ep_status(ep); pch_udc_clear_ep_status(ep, ep->epsts); } @@ -2563,9 +2575,6 @@ static void pch_udc_pcd_reinit(struct pch_udc_dev *dev) dev->ep[UDC_EP0IN_IDX].ep.maxpacket = UDC_EP0IN_MAX_PKT_SIZE; dev->ep[UDC_EP0OUT_IDX].ep.maxpacket = UDC_EP0OUT_MAX_PKT_SIZE; - dev->dma_addr = pci_map_single(dev->pdev, dev->ep0out_buf, 256, - PCI_DMA_FROMDEVICE); - /* remove ep0 in and out from the list. They have own pointer */ list_del_init(&dev->ep[UDC_EP0IN_IDX].ep.ep_list); list_del_init(&dev->ep[UDC_EP0OUT_IDX].ep.ep_list); @@ -2637,6 +2646,13 @@ static int init_dma_pools(struct pch_udc_dev *dev) dev->ep[UDC_EP0IN_IDX].td_stp_phys = 0; dev->ep[UDC_EP0IN_IDX].td_data = NULL; dev->ep[UDC_EP0IN_IDX].td_data_phys = 0; + + dev->ep0out_buf = kzalloc(UDC_EP0OUT_BUFF_SIZE * 4, GFP_KERNEL); + if (!dev->ep0out_buf) + return -ENOMEM; + dev->dma_addr = dma_map_single(&dev->pdev->dev, dev->ep0out_buf, + UDC_EP0OUT_BUFF_SIZE * 4, + DMA_FROM_DEVICE); return 0; } @@ -2750,6 +2766,11 @@ static void pch_udc_remove(struct pci_dev *pdev) pci_pool_destroy(dev->stp_requests); } + if (dev->dma_addr) + dma_unmap_single(&dev->pdev->dev, dev->dma_addr, + UDC_EP0OUT_BUFF_SIZE * 4, DMA_FROM_DEVICE); + kfree(dev->ep0out_buf); + pch_udc_exit(dev); if (dev->irq_registered) @@ -2792,11 +2813,7 @@ static int pch_udc_resume(struct pci_dev *pdev) int ret; pci_set_power_state(pdev, PCI_D0); - ret = pci_restore_state(pdev); - if (ret) { - dev_err(&pdev->dev, "%s: pci_restore_state failed\n", __func__); - return ret; - } + pci_restore_state(pdev); ret = pci_enable_device(pdev); if (ret) { dev_err(&pdev->dev, "%s: pci_enable_device failed\n", __func__); -- cgit v1.2.3-18-g5258 From 06f1b9715c324589b42be69ad33422b83bd42f02 Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Thu, 6 Jan 2011 09:16:31 +0900 Subject: USB: pch_udc: support new device ML7213 IOH Support new device OKI SEMICONDUCTOR's ML7213 IOH(Input/Output Hub) which is for IVI(In-Vehicle Infotainment) use. The ML7213 is companion chip for Intel Atom E6xx series. The ML7213 is completely compatible for Intel EG20T PCH. Signed-off-by: Tomoya MORINAGA Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/Kconfig | 7 ++++++- drivers/usb/gadget/pch_udc.c | 7 +++++++ 2 files changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 1dc9739277b..06bb9d4587e 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -509,7 +509,7 @@ config USB_LANGWELL select USB_GADGET_SELECTED config USB_GADGET_EG20T - boolean "Intel EG20T(Topcliff) USB Device controller" + boolean "Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH UDC" depends on PCI select USB_GADGET_DUALSPEED help @@ -525,6 +525,11 @@ config USB_GADGET_EG20T This driver dose not support interrupt transfer or isochronous transfer modes. + This driver also can be used for OKI SEMICONDUCTOR's ML7213 which is + for IVI(In-Vehicle Infotainment) use. + ML7213 is companion chip for Intel Atom E6xx series. + ML7213 is completely compatible for Intel EG20T PCH. + config USB_EG20T tristate depends on USB_GADGET_EG20T diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c index dfe927b01ff..cf0e6da724a 100644 --- a/drivers/usb/gadget/pch_udc.c +++ b/drivers/usb/gadget/pch_udc.c @@ -361,6 +361,8 @@ struct pch_udc_dev { #define PCH_UDC_PCI_BAR 1 #define PCI_DEVICE_ID_INTEL_EG20T_UDC 0x8808 +#define PCI_VENDOR_ID_ROHM 0x10DB +#define PCI_DEVICE_ID_ML7213_IOH_UDC 0x801D static const char ep0_string[] = "ep0in"; static DEFINE_SPINLOCK(udc_stall_spinlock); /* stall spin lock */ @@ -2931,6 +2933,11 @@ static DEFINE_PCI_DEVICE_TABLE(pch_udc_pcidev_id) = { .class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe, .class_mask = 0xffffffff, }, + { + PCI_DEVICE(PCI_VENDOR_ID_ROHM, PCI_DEVICE_ID_ML7213_IOH_UDC), + .class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe, + .class_mask = 0xffffffff, + }, { 0 }, }; -- cgit v1.2.3-18-g5258 From f75593ceaa08e6d27aec1a5de31cded19e850dd1 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 6 Jan 2011 10:17:09 -0500 Subject: USB: EHCI: fix DMA deallocation bug This patch (as1440) fixes a bug in ehci-hcd. ehci->periodic_size is used to compute the size in a dma_alloc_coherent() call, but then it gets changed later on. As a result, the corresponding call to dma_free_coherent() passes a different size from the original allocation. Fix the problem by adjusting ehci->periodic_size before carrying out any of the memory allocations. Signed-off-by: Alan Stern Tested-by: Larry Finger CC: David Brownell CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 6fee3cd58ef..74dcf49bd01 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -572,6 +572,8 @@ static int ehci_init(struct usb_hcd *hcd) ehci->iaa_watchdog.function = ehci_iaa_watchdog; ehci->iaa_watchdog.data = (unsigned long) ehci; + hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params); + /* * hw default: 1K periodic list heads, one per frame. * periodic_size can shrink by USBCMD update if hcc_params allows. @@ -579,11 +581,20 @@ static int ehci_init(struct usb_hcd *hcd) ehci->periodic_size = DEFAULT_I_TDPS; INIT_LIST_HEAD(&ehci->cached_itd_list); INIT_LIST_HEAD(&ehci->cached_sitd_list); + + if (HCC_PGM_FRAMELISTLEN(hcc_params)) { + /* periodic schedule size can be smaller than default */ + switch (EHCI_TUNE_FLS) { + case 0: ehci->periodic_size = 1024; break; + case 1: ehci->periodic_size = 512; break; + case 2: ehci->periodic_size = 256; break; + default: BUG(); + } + } if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0) return retval; /* controllers may cache some of the periodic schedule ... */ - hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params); if (HCC_ISOC_CACHE(hcc_params)) // full frame cache ehci->i_thresh = 2 + 8; else // N microframes cached @@ -637,12 +648,6 @@ static int ehci_init(struct usb_hcd *hcd) /* periodic schedule size can be smaller than default */ temp &= ~(3 << 2); temp |= (EHCI_TUNE_FLS << 2); - switch (EHCI_TUNE_FLS) { - case 0: ehci->periodic_size = 1024; break; - case 1: ehci->periodic_size = 512; break; - case 2: ehci->periodic_size = 256; break; - default: BUG(); - } } if (HCC_LPM(hcc_params)) { /* support link power management EHCI 1.1 addendum */ -- cgit v1.2.3-18-g5258 From 65519263df87acf09992675304a654d6874f73fd Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Sat, 8 Jan 2011 15:19:40 +0100 Subject: MAINTAINERS: add ueagle-atm entry Cc: Matthieu Castet Signed-off-by: Stanislaw Gruszka Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 55592f8b672..df77a5b2c36 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3139,6 +3139,12 @@ S: Maintained F: net/ieee802154/ F: drivers/ieee802154/ +IKANOS/ADI EAGLE ADSL USB DRIVER +M: Matthieu Castet +M: Stanislaw Gruszka +S: Maintained +F: drivers/usb/atm/ueagle-atm.c + INTEGRITY MEASUREMENT ARCHITECTURE (IMA) M: Mimi Zohar S: Supported -- cgit v1.2.3-18-g5258 From bbfba05283ba482ab7c119150fd3c5611939f9fd Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 8 Jan 2011 18:30:30 +0300 Subject: USB: uss720: remove duplicate USB device Commit ecc1624a2fff45780959efbcb73ace18fdb3c58d (USB: misc: uss720.c: add another vendor/product ID) duplicated entry in the driver's USB device ID table. Remove the duplicate. Signed-off-by: Sergei Shtylyov Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/uss720.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c index 4ff21587ab0..f7a20573803 100644 --- a/drivers/usb/misc/uss720.c +++ b/drivers/usb/misc/uss720.c @@ -776,7 +776,6 @@ static const struct usb_device_id uss720_table[] = { { USB_DEVICE(0x0557, 0x2001) }, { USB_DEVICE(0x0729, 0x1284) }, { USB_DEVICE(0x1293, 0x0002) }, - { USB_DEVICE(0x1293, 0x0002) }, { USB_DEVICE(0x050d, 0x0002) }, { } /* Terminating entry */ }; -- cgit v1.2.3-18-g5258 From d5aa475180d03d45c5dc6134aa833f1b3e89c45e Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 10 Jan 2011 11:23:05 -0500 Subject: USB: g_printer: fix bug in unregistration This patch (as1441) fixes a bug in g_printer. The gadget driver, char device number, and class device should be unregistered in reverse order of registration. As it is now, when the module is unloaded the class device gets unregistered first, causing a crash when the unbind method tries to access it. This fixes Bugzilla #25882. Signed-off-by: Alan Stern CC: Roland Kletzing CC: Craig W. Nadler CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/printer.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index 2fc8636316c..dacc67724fe 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -1596,13 +1596,12 @@ cleanup(void) int status; mutex_lock(&usb_printer_gadget.lock_printer_io); - class_destroy(usb_gadget_class); - unregister_chrdev_region(g_printer_devno, 2); - status = usb_gadget_unregister_driver(&printer_driver); if (status) ERROR(dev, "usb_gadget_unregister_driver %x\n", status); + unregister_chrdev_region(g_printer_devno, 2); + class_destroy(usb_gadget_class); mutex_unlock(&usb_printer_gadget.lock_printer_io); } module_exit(cleanup); -- cgit v1.2.3-18-g5258 From ad84e4a9efb7c8ed322bafb6ebdb9c3a49a3d3a8 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 10 Jan 2011 11:24:14 -0500 Subject: USB: g_printer: fix bug in module parameter definitions This patch (as1442) fixes a bug in g_printer: Module parameters should not be marked "__initdata" if they are accessible in sysfs (i.e., if the mode value in the module_param() macro is nonzero). Otherwise attempts to access the parameters will cause addressing violations. Character-string module parameters must not be marked "__initdata" if the module can be unloaded, because the kernel needs to access the parameter variable at unload time in order to free the dynamically-allocated string. Signed-off-by: Alan Stern CC: Roland Kletzing CC: Craig W. Nadler CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/printer.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index dacc67724fe..12ff6cffedc 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -131,31 +131,31 @@ static struct printer_dev usb_printer_gadget; * parameters are in UTF-8 (superset of ASCII's 7 bit characters). */ -static ushort __initdata idVendor; +static ushort idVendor; module_param(idVendor, ushort, S_IRUGO); MODULE_PARM_DESC(idVendor, "USB Vendor ID"); -static ushort __initdata idProduct; +static ushort idProduct; module_param(idProduct, ushort, S_IRUGO); MODULE_PARM_DESC(idProduct, "USB Product ID"); -static ushort __initdata bcdDevice; +static ushort bcdDevice; module_param(bcdDevice, ushort, S_IRUGO); MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)"); -static char *__initdata iManufacturer; +static char *iManufacturer; module_param(iManufacturer, charp, S_IRUGO); MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string"); -static char *__initdata iProduct; +static char *iProduct; module_param(iProduct, charp, S_IRUGO); MODULE_PARM_DESC(iProduct, "USB Product string"); -static char *__initdata iSerialNum; +static char *iSerialNum; module_param(iSerialNum, charp, S_IRUGO); MODULE_PARM_DESC(iSerialNum, "1"); -static char *__initdata iPNPstring; +static char *iPNPstring; module_param(iPNPstring, charp, S_IRUGO); MODULE_PARM_DESC(iPNPstring, "MFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;"); -- cgit v1.2.3-18-g5258 From cc604ddd118cf4a699c12bc41a5fa2d2f225f702 Mon Sep 17 00:00:00 2001 From: Peter Tyser Date: Mon, 10 Jan 2011 17:34:14 -0600 Subject: USB: ehci-fsl: Fix 'have_sysif_regs' detection Previously a check was done on an ID register at the base of a CPU's internal USB registers to determine if system interface regsiters were present. The check looked for an ID register that had the format ID[0:5] == ~ID[8:13] as described in the MPC5121 User's Manual to determine if a MPC5121 or MPC83xx/85xx was being used. There are two issues with this method: - The ID register is not defined on the MPC83xx/85xx CPUs, so its unclear what is being checked on them. - Newer CPUs such as the P4080 also don't document the ID register, but do share the same format as the MPC5121. Thus the previous code did not set 'have_sysif_regs' properly which results in the P4080 not properly initializing its USB ports. Using the device tree 'compatible' node is a cleaner way to determine if 'have_sysif_regs' should be set and resolves the USB initialization issue seen on the P4080. Tested on a P4080-based system and compile tested on mpc512x_defconfig with Freescale EHCI driver enabled. Cc: Anatolij Gustschin Cc: David Brownell Cc: Kumar Gala Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Peter Tyser Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-fsl.c | 13 ------------- drivers/usb/host/ehci-fsl.h | 3 --- drivers/usb/host/fsl-mph-dr-of.c | 11 ++++++++--- 3 files changed, 8 insertions(+), 19 deletions(-) diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 86e42892016..5c761df7fa8 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -52,7 +52,6 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver, struct resource *res; int irq; int retval; - unsigned int temp; pr_debug("initializing FSL-SOC USB Controller\n"); @@ -126,18 +125,6 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver, goto err3; } - /* - * Check if it is MPC5121 SoC, otherwise set pdata->have_sysif_regs - * flag for 83xx or 8536 system interface registers. - */ - if (pdata->big_endian_mmio) - temp = in_be32(hcd->regs + FSL_SOC_USB_ID); - else - temp = in_le32(hcd->regs + FSL_SOC_USB_ID); - - if ((temp & ID_MSK) != (~((temp & NID_MSK) >> 8) & ID_MSK)) - pdata->have_sysif_regs = 1; - /* Enable USB controller, 83xx or 8536 */ if (pdata->have_sysif_regs) setbits32(hcd->regs + FSL_SOC_USB_CTRL, 0x4); diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h index 2c835379522..3fabed33d94 100644 --- a/drivers/usb/host/ehci-fsl.h +++ b/drivers/usb/host/ehci-fsl.h @@ -19,9 +19,6 @@ #define _EHCI_FSL_H /* offsets for the non-ehci registers in the FSL SOC USB controller */ -#define FSL_SOC_USB_ID 0x0 -#define ID_MSK 0x3f -#define NID_MSK 0x3f00 #define FSL_SOC_USB_ULPIVP 0x170 #define FSL_SOC_USB_PORTSC1 0x184 #define PORT_PTS_MSK (3<<30) diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c index 574b99ea070..79a66d622f9 100644 --- a/drivers/usb/host/fsl-mph-dr-of.c +++ b/drivers/usb/host/fsl-mph-dr-of.c @@ -262,19 +262,24 @@ static void fsl_usb2_mpc5121_exit(struct platform_device *pdev) } } -struct fsl_usb2_platform_data fsl_usb2_mpc5121_pd = { +static struct fsl_usb2_platform_data fsl_usb2_mpc5121_pd = { .big_endian_desc = 1, .big_endian_mmio = 1, .es = 1, + .have_sysif_regs = 0, .le_setup_buf = 1, .init = fsl_usb2_mpc5121_init, .exit = fsl_usb2_mpc5121_exit, }; #endif /* CONFIG_PPC_MPC512x */ +static struct fsl_usb2_platform_data fsl_usb2_mpc8xxx_pd = { + .have_sysif_regs = 1, +}; + static const struct of_device_id fsl_usb2_mph_dr_of_match[] = { - { .compatible = "fsl-usb2-mph", }, - { .compatible = "fsl-usb2-dr", }, + { .compatible = "fsl-usb2-mph", .data = &fsl_usb2_mpc8xxx_pd, }, + { .compatible = "fsl-usb2-dr", .data = &fsl_usb2_mpc8xxx_pd, }, #ifdef CONFIG_PPC_MPC512x { .compatible = "fsl,mpc5121-usb2-dr", .data = &fsl_usb2_mpc5121_pd, }, #endif -- cgit v1.2.3-18-g5258 From 5620b5f7f19e9ee3fcf6ecf493fed7821b7b495b Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 11 Jan 2011 14:16:50 -0500 Subject: USB serial: add missing .usb_driver field in serial drivers This patch (as1443) fixes a bug found in many of the USB serial drivers: They don't set the .usb_driver field in their usb_serial_driver structure. This field is needed for assigning dynamic IDs for device matching. In addition, starting with the 2.6.37 kernel, the .usb_driver field is needed for proper autosuspend operation. Without it, attempts to open the device file will fail. Signed-off-by: Alan Stern Reported-by: Dan Williams CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/io_tables.h | 1 + drivers/usb/serial/iuu_phoenix.c | 1 + drivers/usb/serial/keyspan.h | 4 ++++ drivers/usb/serial/moto_modem.c | 1 + drivers/usb/serial/oti6858.c | 1 + drivers/usb/serial/qcaux.c | 1 + drivers/usb/serial/siemens_mpi.c | 1 + drivers/usb/serial/spcp8x5.c | 1 + drivers/usb/serial/usb-serial.c | 8 ++++++-- drivers/usb/serial/usb_debug.c | 1 + 10 files changed, 18 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h index 6ab2a3f97fe..178b22eb32b 100644 --- a/drivers/usb/serial/io_tables.h +++ b/drivers/usb/serial/io_tables.h @@ -199,6 +199,7 @@ static struct usb_serial_driver epic_device = { .name = "epic", }, .description = "EPiC device", + .usb_driver = &io_driver, .id_table = Epic_port_id_table, .num_ports = 1, .open = edge_open, diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 12ed594f5f8..99b97c04896 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -1275,6 +1275,7 @@ static struct usb_serial_driver iuu_device = { .name = "iuu_phoenix", }, .id_table = id_table, + .usb_driver = &iuu_driver, .num_ports = 1, .bulk_in_size = 512, .bulk_out_size = 512, diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index 2d8baf6ac47..ce134dc28dd 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -546,6 +546,7 @@ static struct usb_serial_driver keyspan_pre_device = { .name = "keyspan_no_firm", }, .description = "Keyspan - (without firmware)", + .usb_driver = &keyspan_driver, .id_table = keyspan_pre_ids, .num_ports = 1, .attach = keyspan_fake_startup, @@ -557,6 +558,7 @@ static struct usb_serial_driver keyspan_1port_device = { .name = "keyspan_1", }, .description = "Keyspan 1 port adapter", + .usb_driver = &keyspan_driver, .id_table = keyspan_1port_ids, .num_ports = 1, .open = keyspan_open, @@ -579,6 +581,7 @@ static struct usb_serial_driver keyspan_2port_device = { .name = "keyspan_2", }, .description = "Keyspan 2 port adapter", + .usb_driver = &keyspan_driver, .id_table = keyspan_2port_ids, .num_ports = 2, .open = keyspan_open, @@ -601,6 +604,7 @@ static struct usb_serial_driver keyspan_4port_device = { .name = "keyspan_4", }, .description = "Keyspan 4 port adapter", + .usb_driver = &keyspan_driver, .id_table = keyspan_4port_ids, .num_ports = 4, .open = keyspan_open, diff --git a/drivers/usb/serial/moto_modem.c b/drivers/usb/serial/moto_modem.c index cf1718394e1..653465f61d4 100644 --- a/drivers/usb/serial/moto_modem.c +++ b/drivers/usb/serial/moto_modem.c @@ -44,6 +44,7 @@ static struct usb_serial_driver moto_device = { .name = "moto-modem", }, .id_table = id_table, + .usb_driver = &moto_driver, .num_ports = 1, }; diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index 5be866bb7a4..73613205be7 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -157,6 +157,7 @@ static struct usb_serial_driver oti6858_device = { .name = "oti6858", }, .id_table = id_table, + .usb_driver = &oti6858_driver, .num_ports = 1, .open = oti6858_open, .close = oti6858_close, diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c index b53865b8cd9..30b73e68a90 100644 --- a/drivers/usb/serial/qcaux.c +++ b/drivers/usb/serial/qcaux.c @@ -86,6 +86,7 @@ static struct usb_serial_driver qcaux_device = { .name = "qcaux", }, .id_table = id_table, + .usb_driver = &qcaux_driver, .num_ports = 1, }; diff --git a/drivers/usb/serial/siemens_mpi.c b/drivers/usb/serial/siemens_mpi.c index cb8195cabfd..74cd4ccdb3f 100644 --- a/drivers/usb/serial/siemens_mpi.c +++ b/drivers/usb/serial/siemens_mpi.c @@ -42,6 +42,7 @@ static struct usb_serial_driver siemens_usb_mpi_device = { .name = "siemens_mpi", }, .id_table = id_table, + .usb_driver = &siemens_usb_mpi_driver, .num_ports = 1, }; diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index 765aa983bf5..c7665d39d19 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -645,6 +645,7 @@ static struct usb_serial_driver spcp8x5_device = { .name = "SPCP8x5", }, .id_table = id_table, + .usb_driver = &spcp8x5_driver, .num_ports = 1, .open = spcp8x5_open, .dtr_rts = spcp8x5_dtr_rts, diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 6954de50c0f..546a52179be 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1344,11 +1344,15 @@ int usb_serial_register(struct usb_serial_driver *driver) return -ENODEV; fixup_generic(driver); - if (driver->usb_driver) - driver->usb_driver->supports_autosuspend = 1; if (!driver->description) driver->description = driver->driver.name; + if (!driver->usb_driver) { + WARN(1, "Serial driver %s has no usb_driver\n", + driver->description); + return -EINVAL; + } + driver->usb_driver->supports_autosuspend = 1; /* Add this device to our list of devices */ mutex_lock(&table_lock); diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c index f2ed6a31be7..95a82148ee8 100644 --- a/drivers/usb/serial/usb_debug.c +++ b/drivers/usb/serial/usb_debug.c @@ -75,6 +75,7 @@ static struct usb_serial_driver debug_device = { .name = "debug", }, .id_table = id_table, + .usb_driver = &debug_driver, .num_ports = 1, .bulk_out_size = USB_DEBUG_MAX_PACKET_SIZE, .break_ctl = usb_debug_break_ctl, -- cgit v1.2.3-18-g5258 From aa52b3a92918039b273fc9d1994bd34227c40269 Mon Sep 17 00:00:00 2001 From: Nicolaus Colberg Date: Wed, 12 Jan 2011 16:30:03 +0100 Subject: USB: adding USB support for Cinterion's HC2x, EU3 and PH8 products /drivers/usb/serial/option.c: Adding support for Cinterion's HC25, HC28, HC28J, EU3-E, EU3-P and PH8 by correcting/adding Cinterion's and Siemens' Vendor IDs as well as Product IDs and USB_DEVICE tuples Signed-off-by: Nicolaus Colberg Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 748778288d9..5f46838dfee 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -382,7 +382,16 @@ static void option_instat_callback(struct urb *urb); #define HAIER_VENDOR_ID 0x201e #define HAIER_PRODUCT_CE100 0x2009 -#define CINTERION_VENDOR_ID 0x0681 +/* Cinterion (formerly Siemens) products */ +#define SIEMENS_VENDOR_ID 0x0681 +#define CINTERION_VENDOR_ID 0x1e2d +#define CINTERION_PRODUCT_HC25_MDM 0x0047 +#define CINTERION_PRODUCT_HC25_MDMNET 0x0040 +#define CINTERION_PRODUCT_HC28_MDM 0x004C +#define CINTERION_PRODUCT_HC28_MDMNET 0x004A /* same for HC28J */ +#define CINTERION_PRODUCT_EU3_E 0x0051 +#define CINTERION_PRODUCT_EU3_P 0x0052 +#define CINTERION_PRODUCT_PH8 0x0053 /* Olivetti products */ #define OLIVETTI_VENDOR_ID 0x0b3c @@ -944,7 +953,17 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100F) }, { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1011)}, { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1012)}, - { USB_DEVICE(CINTERION_VENDOR_ID, 0x0047) }, + /* Cinterion */ + { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) }, + { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) }, + { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8) }, + { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, + { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) }, + { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) }, + { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDMNET) }, + { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, /* HC28 enumerates with Siemens or Cinterion VID depending on FW revision */ + { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) }, + { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100) }, { USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */ { USB_DEVICE(ONDA_VENDOR_ID, ONDA_MT825UP) }, /* ONDA MT825UP modem */ -- cgit v1.2.3-18-g5258 From 96a3e79edff6f41b0f115a82f1a39d66218077a7 Mon Sep 17 00:00:00 2001 From: Dario Lombardo Date: Fri, 21 Jan 2011 15:35:19 +0100 Subject: drivers: update to pl2303 usb-serial to support Motorola cables Added 0x0307 device id to support Motorola cables to the pl2303 usb serial driver. This cable has a modified chip that is a pl2303, but declares itself as 0307. Fixed by adding the right device id to the supported devices list, assigning it the code labeled PL2303_PRODUCT_ID_MOTOROLA. Signed-off-by: Dario Lombardo Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/pl2303.c | 1 + drivers/usb/serial/pl2303.h | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 8ae4c6cbc38..45c40e6e973 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -50,6 +50,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_HCR331) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MOTOROLA) }, { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) }, { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) }, { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) }, diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index 43eb9bdad42..1b025f75daf 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -21,6 +21,7 @@ #define PL2303_PRODUCT_ID_MMX 0x0612 #define PL2303_PRODUCT_ID_GPRS 0x0609 #define PL2303_PRODUCT_ID_HCR331 0x331a +#define PL2303_PRODUCT_ID_MOTOROLA 0x0307 #define ATEN_VENDOR_ID 0x0557 #define ATEN_VENDOR_ID2 0x0547 -- cgit v1.2.3-18-g5258 From 3bb8029a2445e289efade6133b01545143336f70 Mon Sep 17 00:00:00 2001 From: Eric Bénard Date: Thu, 13 Jan 2011 14:53:17 +0100 Subject: USB: unbreak ehci-mxc on otg port of i.MX27 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 711669e5b80b6f2d88f61ed8a9681f83d8cbd201 fixed port 0 support for i.MX51 but broke it for (at least) i.MX27 which doesn't have a usb_phy1 clock but has a pdev->id 0. Signed-off-by: Eric Bénard Cc: Arnaud Patard Cc: Sascha Hauer Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-mxc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index fa59b26fc5b..d443fbd8535 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -177,8 +177,8 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) clk_enable(priv->ahbclk); } - /* "dr" device has its own clock */ - if (pdev->id == 0) { + /* "dr" device has its own clock on i.MX51 */ + if (cpu_is_mx51() && (pdev->id == 0)) { priv->phy1clk = clk_get(dev, "usb_phy1"); if (IS_ERR(priv->phy1clk)) { ret = PTR_ERR(priv->phy1clk); -- cgit v1.2.3-18-g5258 From a464dc4d4044c936d4558725fa2229fb4a1aa932 Mon Sep 17 00:00:00 2001 From: "Arnaud Patard (Rtp)" Date: Tue, 18 Jan 2011 00:04:12 +0100 Subject: USB: ehci-mxc: add work-around for efika mx/sb bug Add support for setting CHRGVBUS to workaround a hardware bug on efika mx/sb boards. See http://lists.infradead.org/pipermail/linux-arm-kernel/2011-January/037341.html Signed-off-by: Arnaud Patard Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-mxc.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index d443fbd8535..c8e360d7d97 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -21,10 +21,13 @@ #include #include #include +#include #include #include +#include + #define ULPI_VIEWPORT_OFFSET 0x170 struct ehci_mxc_priv { @@ -114,6 +117,7 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) struct usb_hcd *hcd; struct resource *res; int irq, ret; + unsigned int flags; struct ehci_mxc_priv *priv; struct device *dev = &pdev->dev; struct ehci_hcd *ehci; @@ -240,6 +244,23 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) if (ret) goto err_add; + if (pdata->otg) { + /* + * efikamx and efikasb have some hardware bug which is + * preventing usb to work unless CHRGVBUS is set. + * It's in violation of USB specs + */ + if (machine_is_mx51_efikamx() || machine_is_mx51_efikasb()) { + flags = otg_io_read(pdata->otg, ULPI_OTG_CTRL); + flags |= ULPI_OTG_CTRL_CHRGVBUS; + ret = otg_io_write(pdata->otg, flags, ULPI_OTG_CTRL); + if (ret) { + dev_err(dev, "unable to set CHRVBUS\n"); + goto err_add; + } + } + } + return 0; err_add: -- cgit v1.2.3-18-g5258 From a9d61bc49188e32d2ae9cf0f683cde3e1744feef Mon Sep 17 00:00:00 2001 From: Pieter Maes Date: Tue, 18 Jan 2011 00:26:16 +0100 Subject: USB: serial: Updated support for ICOM devices I found the original patch on the db0fhn repeater wiki (couldn't find the email of the origial author) I guess it was never commited. I updated and added some Icom HAM-radio devices to the ftdi driver. Added extra comments to make clear what devices it are. Signed-off-by: Pieter Maes Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 12 +++++++++++- drivers/usb/serial/ftdi_sio_ids.h | 22 +++++++++++++++++----- 2 files changed, 28 insertions(+), 6 deletions(-) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index a2668d08926..4787c0cd063 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -676,7 +676,17 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) }, { USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) }, - { USB_DEVICE(ICOM_ID1_VID, ICOM_ID1_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_1_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_OPC_U_UC_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2C1_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2C2_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2D_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2VT_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2VR_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVT_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVR_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVT_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVR_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) }, { USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) }, { USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index bf086728548..ed160def858 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -569,11 +569,23 @@ #define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */ /* - * Icom ID-1 digital transceiver - */ - -#define ICOM_ID1_VID 0x0C26 -#define ICOM_ID1_PID 0x0004 + * Definitions for Icom Inc. devices + */ +#define ICOM_VID 0x0C26 /* Icom vendor ID */ +/* Note: ID-1 is a communications tranceiver for HAM-radio operators */ +#define ICOM_ID_1_PID 0x0004 /* ID-1 USB to RS-232 */ +/* Note: OPC is an Optional cable to connect an Icom Tranceiver */ +#define ICOM_OPC_U_UC_PID 0x0018 /* OPC-478UC, OPC-1122U cloning cable */ +/* Note: ID-RP* devices are Icom Repeater Devices for HAM-radio */ +#define ICOM_ID_RP2C1_PID 0x0009 /* ID-RP2C Asset 1 to RS-232 */ +#define ICOM_ID_RP2C2_PID 0x000A /* ID-RP2C Asset 2 to RS-232 */ +#define ICOM_ID_RP2D_PID 0x000B /* ID-RP2D configuration port*/ +#define ICOM_ID_RP2VT_PID 0x000C /* ID-RP2V Transmit config port */ +#define ICOM_ID_RP2VR_PID 0x000D /* ID-RP2V Receive config port */ +#define ICOM_ID_RP4KVT_PID 0x0010 /* ID-RP4000V Transmit config port */ +#define ICOM_ID_RP4KVR_PID 0x0011 /* ID-RP4000V Receive config port */ +#define ICOM_ID_RP2KVT_PID 0x0012 /* ID-RP2000V Transmit config port */ +#define ICOM_ID_RP2KVR_PID 0x0013 /* ID-RP2000V Receive config port */ /* * GN Otometrics (http://www.otometrics.com) -- cgit v1.2.3-18-g5258 From 15680cdfc69a7277ba87a8a3a3242d67c4ba5916 Mon Sep 17 00:00:00 2001 From: Toshiharu Okada Date: Tue, 18 Jan 2011 20:26:27 +0900 Subject: usb: pch_udc: Fix the worning log issue at gadget driver remove When removing a serial gadget driver, the kernel warning message is outputted. This patch fixed this issue. The pch_udc driver did not have disconnection processing of gadget. Signed-off-by: Toshiharu Okada Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/pch_udc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c index cf0e6da724a..b120dbb64d0 100644 --- a/drivers/usb/gadget/pch_udc.c +++ b/drivers/usb/gadget/pch_udc.c @@ -2718,7 +2718,8 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) pch_udc_disable_interrupts(dev, UDC_DEVINT_MSK); - /* Assues that there are no pending requets with this driver */ + /* Assures that there are no pending requests with this driver */ + driver->disconnect(&dev->gadget); driver->unbind(&dev->gadget); dev->gadget.dev.driver = NULL; dev->driver = NULL; -- cgit v1.2.3-18-g5258 From 49d3df53a80deed2251b91f50ae9e1c5caf7ded7 Mon Sep 17 00:00:00 2001 From: Pavankumar Kondeti Date: Tue, 11 Jan 2011 09:19:21 +0530 Subject: USB: gadget: Fix error path in ci13xxx_udc gadget probe function Don't call gadget driver's unbind when bind is failed. Initialize udc->driver only after gadget driver bind is successful. Otherwise pull-up can be enabled upon VBUS session even when no gadget is bounded. Signed-off-by: Pavankumar Kondeti Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/ci13xxx_udc.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index 31656a2b4ab..b0b90621dc1 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -2427,7 +2427,6 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver, info("hw_ep_max = %d", hw_ep_max); - udc->driver = driver; udc->gadget.dev.driver = NULL; retval = 0; @@ -2479,6 +2478,7 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver, goto done; } + udc->driver = driver; pm_runtime_get_sync(&udc->gadget.dev); if (udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS) { if (udc->vbus_active) { @@ -2496,8 +2496,6 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver, done: spin_unlock_irqrestore(udc->lock, flags); - if (retval) - usb_gadget_unregister_driver(driver); return retval; } EXPORT_SYMBOL(usb_gadget_probe_driver); -- cgit v1.2.3-18-g5258 From ca9cfea09fc5802074f79d086547c6363ddc894b Mon Sep 17 00:00:00 2001 From: Pavankumar Kondeti Date: Tue, 11 Jan 2011 09:19:22 +0530 Subject: USB: gadget: Fix endpoint representation in ci13xxx_udc Fix a bug where only half the number of endpoints supported by the hardware are exposed to gadget. If DEN filed in the DCCPARAMS register has 'N' then 'N' IN endpoints and 'N" OUT endpoints can be supported. But only 'N' bidirectional endpoints are added to the gadget ep_list. This patch also ensures that the data and handshake transactions of previous setup packet are flushed upon a new setup packet arrival on ep0. Signed-off-by: Pavankumar Kondeti Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/ci13xxx_udc.c | 264 ++++++++++++++++++++------------------- drivers/usb/gadget/ci13xxx_udc.h | 9 +- 2 files changed, 142 insertions(+), 131 deletions(-) diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index b0b90621dc1..a1c67ae1572 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -76,10 +76,21 @@ static DEFINE_SPINLOCK(udc_lock); /* control endpoint description */ static const struct usb_endpoint_descriptor -ctrl_endpt_desc = { +ctrl_endpt_out_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_CONTROL, + .wMaxPacketSize = cpu_to_le16(CTRL_PAYLOAD_MAX), +}; + +static const struct usb_endpoint_descriptor +ctrl_endpt_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_CONTROL, .wMaxPacketSize = cpu_to_le16(CTRL_PAYLOAD_MAX), }; @@ -265,10 +276,10 @@ static int hw_device_init(void __iomem *base) hw_bank.size /= sizeof(u32); reg = hw_aread(ABS_DCCPARAMS, DCCPARAMS_DEN) >> ffs_nr(DCCPARAMS_DEN); - if (reg == 0 || reg > ENDPT_MAX) - return -ENODEV; + hw_ep_max = reg * 2; /* cache hw ENDPT_MAX */ - hw_ep_max = reg; /* cache hw ENDPT_MAX */ + if (hw_ep_max == 0 || hw_ep_max > ENDPT_MAX) + return -ENODEV; /* setup lock mode ? */ @@ -1197,16 +1208,17 @@ static ssize_t show_qheads(struct device *dev, struct device_attribute *attr, } spin_lock_irqsave(udc->lock, flags); - for (i = 0; i < hw_ep_max; i++) { - struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i]; + for (i = 0; i < hw_ep_max/2; i++) { + struct ci13xxx_ep *mEpRx = &udc->ci13xxx_ep[i]; + struct ci13xxx_ep *mEpTx = &udc->ci13xxx_ep[i + hw_ep_max/2]; n += scnprintf(buf + n, PAGE_SIZE - n, "EP=%02i: RX=%08X TX=%08X\n", - i, (u32)mEp->qh[RX].dma, (u32)mEp->qh[TX].dma); + i, (u32)mEpRx->qh.dma, (u32)mEpTx->qh.dma); for (j = 0; j < (sizeof(struct ci13xxx_qh)/sizeof(u32)); j++) { n += scnprintf(buf + n, PAGE_SIZE - n, " %04X: %08X %08X\n", j, - *((u32 *)mEp->qh[RX].ptr + j), - *((u32 *)mEp->qh[TX].ptr + j)); + *((u32 *)mEpRx->qh.ptr + j), + *((u32 *)mEpTx->qh.ptr + j)); } } spin_unlock_irqrestore(udc->lock, flags); @@ -1293,7 +1305,7 @@ static ssize_t show_requests(struct device *dev, struct device_attribute *attr, unsigned long flags; struct list_head *ptr = NULL; struct ci13xxx_req *req = NULL; - unsigned i, j, k, n = 0, qSize = sizeof(struct ci13xxx_td)/sizeof(u32); + unsigned i, j, n = 0, qSize = sizeof(struct ci13xxx_td)/sizeof(u32); dbg_trace("[%s] %p\n", __func__, buf); if (attr == NULL || buf == NULL) { @@ -1303,22 +1315,20 @@ static ssize_t show_requests(struct device *dev, struct device_attribute *attr, spin_lock_irqsave(udc->lock, flags); for (i = 0; i < hw_ep_max; i++) - for (k = RX; k <= TX; k++) - list_for_each(ptr, &udc->ci13xxx_ep[i].qh[k].queue) - { - req = list_entry(ptr, - struct ci13xxx_req, queue); + list_for_each(ptr, &udc->ci13xxx_ep[i].qh.queue) + { + req = list_entry(ptr, struct ci13xxx_req, queue); + n += scnprintf(buf + n, PAGE_SIZE - n, + "EP=%02i: TD=%08X %s\n", + i % hw_ep_max/2, (u32)req->dma, + ((i < hw_ep_max/2) ? "RX" : "TX")); + + for (j = 0; j < qSize; j++) n += scnprintf(buf + n, PAGE_SIZE - n, - "EP=%02i: TD=%08X %s\n", - i, (u32)req->dma, - ((k == RX) ? "RX" : "TX")); - - for (j = 0; j < qSize; j++) - n += scnprintf(buf + n, PAGE_SIZE - n, - " %04X: %08X\n", j, - *((u32 *)req->ptr + j)); - } + " %04X: %08X\n", j, + *((u32 *)req->ptr + j)); + } spin_unlock_irqrestore(udc->lock, flags); return n; @@ -1467,12 +1477,12 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) * At this point it's guaranteed exclusive access to qhead * (endpt is not primed) so it's no need to use tripwire */ - mEp->qh[mEp->dir].ptr->td.next = mReq->dma; /* TERMINATE = 0 */ - mEp->qh[mEp->dir].ptr->td.token &= ~TD_STATUS; /* clear status */ + mEp->qh.ptr->td.next = mReq->dma; /* TERMINATE = 0 */ + mEp->qh.ptr->td.token &= ~TD_STATUS; /* clear status */ if (mReq->req.zero == 0) - mEp->qh[mEp->dir].ptr->cap |= QH_ZLT; + mEp->qh.ptr->cap |= QH_ZLT; else - mEp->qh[mEp->dir].ptr->cap &= ~QH_ZLT; + mEp->qh.ptr->cap &= ~QH_ZLT; wmb(); /* synchronize before ep prime */ @@ -1542,11 +1552,11 @@ __acquires(mEp->lock) hw_ep_flush(mEp->num, mEp->dir); - while (!list_empty(&mEp->qh[mEp->dir].queue)) { + while (!list_empty(&mEp->qh.queue)) { /* pop oldest request */ struct ci13xxx_req *mReq = \ - list_entry(mEp->qh[mEp->dir].queue.next, + list_entry(mEp->qh.queue.next, struct ci13xxx_req, queue); list_del_init(&mReq->queue); mReq->req.status = -ESHUTDOWN; @@ -1571,8 +1581,6 @@ static int _gadget_stop_activity(struct usb_gadget *gadget) { struct usb_ep *ep; struct ci13xxx *udc = container_of(gadget, struct ci13xxx, gadget); - struct ci13xxx_ep *mEp = container_of(gadget->ep0, - struct ci13xxx_ep, ep); trace("%p", gadget); @@ -1583,7 +1591,8 @@ static int _gadget_stop_activity(struct usb_gadget *gadget) gadget_for_each_ep(ep, gadget) { usb_ep_fifo_flush(ep); } - usb_ep_fifo_flush(gadget->ep0); + usb_ep_fifo_flush(&udc->ep0out.ep); + usb_ep_fifo_flush(&udc->ep0in.ep); udc->driver->disconnect(gadget); @@ -1591,11 +1600,12 @@ static int _gadget_stop_activity(struct usb_gadget *gadget) gadget_for_each_ep(ep, gadget) { usb_ep_disable(ep); } - usb_ep_disable(gadget->ep0); + usb_ep_disable(&udc->ep0out.ep); + usb_ep_disable(&udc->ep0in.ep); - if (mEp->status != NULL) { - usb_ep_free_request(gadget->ep0, mEp->status); - mEp->status = NULL; + if (udc->status != NULL) { + usb_ep_free_request(&udc->ep0in.ep, udc->status); + udc->status = NULL; } return 0; @@ -1614,7 +1624,6 @@ static void isr_reset_handler(struct ci13xxx *udc) __releases(udc->lock) __acquires(udc->lock) { - struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[0]; int retval; trace("%p", udc); @@ -1635,11 +1644,15 @@ __acquires(udc->lock) if (retval) goto done; - retval = usb_ep_enable(&mEp->ep, &ctrl_endpt_desc); + retval = usb_ep_enable(&udc->ep0out.ep, &ctrl_endpt_out_desc); + if (retval) + goto done; + + retval = usb_ep_enable(&udc->ep0in.ep, &ctrl_endpt_in_desc); if (!retval) { - mEp->status = usb_ep_alloc_request(&mEp->ep, GFP_ATOMIC); - if (mEp->status == NULL) { - usb_ep_disable(&mEp->ep); + udc->status = usb_ep_alloc_request(&udc->ep0in.ep, GFP_ATOMIC); + if (udc->status == NULL) { + usb_ep_disable(&udc->ep0out.ep); retval = -ENOMEM; } } @@ -1672,16 +1685,17 @@ static void isr_get_status_complete(struct usb_ep *ep, struct usb_request *req) /** * isr_get_status_response: get_status request response - * @ep: endpoint + * @udc: udc struct * @setup: setup request packet * * This function returns an error code */ -static int isr_get_status_response(struct ci13xxx_ep *mEp, +static int isr_get_status_response(struct ci13xxx *udc, struct usb_ctrlrequest *setup) __releases(mEp->lock) __acquires(mEp->lock) { + struct ci13xxx_ep *mEp = &udc->ep0in; struct usb_request *req = NULL; gfp_t gfp_flags = GFP_ATOMIC; int dir, num, retval; @@ -1736,27 +1750,23 @@ __acquires(mEp->lock) /** * isr_setup_status_phase: queues the status phase of a setup transation - * @mEp: endpoint + * @udc: udc struct * * This function returns an error code */ -static int isr_setup_status_phase(struct ci13xxx_ep *mEp) +static int isr_setup_status_phase(struct ci13xxx *udc) __releases(mEp->lock) __acquires(mEp->lock) { int retval; + struct ci13xxx_ep *mEp; - trace("%p", mEp); - - /* mEp is always valid & configured */ - - if (mEp->type == USB_ENDPOINT_XFER_CONTROL) - mEp->dir = (mEp->dir == TX) ? RX : TX; + trace("%p", udc); - mEp->status->no_interrupt = 1; + mEp = (udc->ep0_dir == TX) ? &udc->ep0out : &udc->ep0in; spin_unlock(mEp->lock); - retval = usb_ep_queue(&mEp->ep, mEp->status, GFP_ATOMIC); + retval = usb_ep_queue(&mEp->ep, udc->status, GFP_ATOMIC); spin_lock(mEp->lock); return retval; @@ -1778,11 +1788,11 @@ __acquires(mEp->lock) trace("%p", mEp); - if (list_empty(&mEp->qh[mEp->dir].queue)) + if (list_empty(&mEp->qh.queue)) return -EINVAL; /* pop oldest request */ - mReq = list_entry(mEp->qh[mEp->dir].queue.next, + mReq = list_entry(mEp->qh.queue.next, struct ci13xxx_req, queue); list_del_init(&mReq->queue); @@ -1794,10 +1804,10 @@ __acquires(mEp->lock) dbg_done(_usb_addr(mEp), mReq->ptr->token, retval); - if (!list_empty(&mEp->qh[mEp->dir].queue)) { + if (!list_empty(&mEp->qh.queue)) { struct ci13xxx_req* mReqEnq; - mReqEnq = list_entry(mEp->qh[mEp->dir].queue.next, + mReqEnq = list_entry(mEp->qh.queue.next, struct ci13xxx_req, queue); _hardware_enqueue(mEp, mReqEnq); } @@ -1836,16 +1846,14 @@ __acquires(udc->lock) int type, num, err = -EINVAL; struct usb_ctrlrequest req; - if (mEp->desc == NULL) continue; /* not configured */ - if ((mEp->dir == RX && hw_test_and_clear_complete(i)) || - (mEp->dir == TX && hw_test_and_clear_complete(i + 16))) { + if (hw_test_and_clear_complete(i)) { err = isr_tr_complete_low(mEp); if (mEp->type == USB_ENDPOINT_XFER_CONTROL) { if (err > 0) /* needs status phase */ - err = isr_setup_status_phase(mEp); + err = isr_setup_status_phase(udc); if (err < 0) { dbg_event(_usb_addr(mEp), "ERROR", err); @@ -1866,15 +1874,22 @@ __acquires(udc->lock) continue; } + /* + * Flush data and handshake transactions of previous + * setup packet. + */ + _ep_nuke(&udc->ep0out); + _ep_nuke(&udc->ep0in); + /* read_setup_packet */ do { hw_test_and_set_setup_guard(); - memcpy(&req, &mEp->qh[RX].ptr->setup, sizeof(req)); + memcpy(&req, &mEp->qh.ptr->setup, sizeof(req)); } while (!hw_test_and_clear_setup_guard()); type = req.bRequestType; - mEp->dir = (type & USB_DIR_IN) ? TX : RX; + udc->ep0_dir = (type & USB_DIR_IN) ? TX : RX; dbg_setup(_usb_addr(mEp), &req); @@ -1895,7 +1910,7 @@ __acquires(udc->lock) if (err) break; } - err = isr_setup_status_phase(mEp); + err = isr_setup_status_phase(udc); break; case USB_REQ_GET_STATUS: if (type != (USB_DIR_IN|USB_RECIP_DEVICE) && @@ -1905,7 +1920,7 @@ __acquires(udc->lock) if (le16_to_cpu(req.wLength) != 2 || le16_to_cpu(req.wValue) != 0) break; - err = isr_get_status_response(mEp, &req); + err = isr_get_status_response(udc, &req); break; case USB_REQ_SET_ADDRESS: if (type != (USB_DIR_OUT|USB_RECIP_DEVICE)) @@ -1916,7 +1931,7 @@ __acquires(udc->lock) err = hw_usb_set_address((u8)le16_to_cpu(req.wValue)); if (err) break; - err = isr_setup_status_phase(mEp); + err = isr_setup_status_phase(udc); break; case USB_REQ_SET_FEATURE: if (type != (USB_DIR_OUT|USB_RECIP_ENDPOINT) && @@ -1932,12 +1947,12 @@ __acquires(udc->lock) spin_lock(udc->lock); if (err) break; - err = isr_setup_status_phase(mEp); + err = isr_setup_status_phase(udc); break; default: delegate: if (req.wLength == 0) /* no data phase */ - mEp->dir = TX; + udc->ep0_dir = TX; spin_unlock(udc->lock); err = udc->driver->setup(&udc->gadget, &req); @@ -1968,7 +1983,7 @@ static int ep_enable(struct usb_ep *ep, const struct usb_endpoint_descriptor *desc) { struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); - int direction, retval = 0; + int retval = 0; unsigned long flags; trace("%p, %p", ep, desc); @@ -1982,7 +1997,7 @@ static int ep_enable(struct usb_ep *ep, mEp->desc = desc; - if (!list_empty(&mEp->qh[mEp->dir].queue)) + if (!list_empty(&mEp->qh.queue)) warn("enabling a non-empty endpoint!"); mEp->dir = usb_endpoint_dir_in(desc) ? TX : RX; @@ -1991,29 +2006,22 @@ static int ep_enable(struct usb_ep *ep, mEp->ep.maxpacket = __constant_le16_to_cpu(desc->wMaxPacketSize); - direction = mEp->dir; - do { - dbg_event(_usb_addr(mEp), "ENABLE", 0); - - mEp->qh[mEp->dir].ptr->cap = 0; - - if (mEp->type == USB_ENDPOINT_XFER_CONTROL) - mEp->qh[mEp->dir].ptr->cap |= QH_IOS; - else if (mEp->type == USB_ENDPOINT_XFER_ISOC) - mEp->qh[mEp->dir].ptr->cap &= ~QH_MULT; - else - mEp->qh[mEp->dir].ptr->cap &= ~QH_ZLT; + dbg_event(_usb_addr(mEp), "ENABLE", 0); - mEp->qh[mEp->dir].ptr->cap |= - (mEp->ep.maxpacket << ffs_nr(QH_MAX_PKT)) & QH_MAX_PKT; - mEp->qh[mEp->dir].ptr->td.next |= TD_TERMINATE; /* needed? */ + mEp->qh.ptr->cap = 0; - retval |= hw_ep_enable(mEp->num, mEp->dir, mEp->type); + if (mEp->type == USB_ENDPOINT_XFER_CONTROL) + mEp->qh.ptr->cap |= QH_IOS; + else if (mEp->type == USB_ENDPOINT_XFER_ISOC) + mEp->qh.ptr->cap &= ~QH_MULT; + else + mEp->qh.ptr->cap &= ~QH_ZLT; - if (mEp->type == USB_ENDPOINT_XFER_CONTROL) - mEp->dir = (mEp->dir == TX) ? RX : TX; + mEp->qh.ptr->cap |= + (mEp->ep.maxpacket << ffs_nr(QH_MAX_PKT)) & QH_MAX_PKT; + mEp->qh.ptr->td.next |= TD_TERMINATE; /* needed? */ - } while (mEp->dir != direction); + retval |= hw_ep_enable(mEp->num, mEp->dir, mEp->type); spin_unlock_irqrestore(mEp->lock, flags); return retval; @@ -2146,7 +2154,7 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req, spin_lock_irqsave(mEp->lock, flags); if (mEp->type == USB_ENDPOINT_XFER_CONTROL && - !list_empty(&mEp->qh[mEp->dir].queue)) { + !list_empty(&mEp->qh.queue)) { _ep_nuke(mEp); retval = -EOVERFLOW; warn("endpoint ctrl %X nuked", _usb_addr(mEp)); @@ -2170,9 +2178,9 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req, /* push request */ mReq->req.status = -EINPROGRESS; mReq->req.actual = 0; - list_add_tail(&mReq->queue, &mEp->qh[mEp->dir].queue); + list_add_tail(&mReq->queue, &mEp->qh.queue); - if (list_is_singular(&mEp->qh[mEp->dir].queue)) + if (list_is_singular(&mEp->qh.queue)) retval = _hardware_enqueue(mEp, mReq); if (retval == -EALREADY) { @@ -2199,7 +2207,7 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req) trace("%p, %p", ep, req); if (ep == NULL || req == NULL || mEp->desc == NULL || - list_empty(&mReq->queue) || list_empty(&mEp->qh[mEp->dir].queue)) + list_empty(&mReq->queue) || list_empty(&mEp->qh.queue)) return -EINVAL; spin_lock_irqsave(mEp->lock, flags); @@ -2244,7 +2252,7 @@ static int ep_set_halt(struct usb_ep *ep, int value) #ifndef STALL_IN /* g_file_storage MS compliant but g_zero fails chapter 9 compliance */ if (value && mEp->type == USB_ENDPOINT_XFER_BULK && mEp->dir == TX && - !list_empty(&mEp->qh[mEp->dir].queue)) { + !list_empty(&mEp->qh.queue)) { spin_unlock_irqrestore(mEp->lock, flags); return -EAGAIN; } @@ -2355,7 +2363,7 @@ static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active) if (is_active) { pm_runtime_get_sync(&_gadget->dev); hw_device_reset(udc); - hw_device_state(udc->ci13xxx_ep[0].qh[RX].dma); + hw_device_state(udc->ep0out.qh.dma); } else { hw_device_state(0); if (udc->udc_driver->notify_event) @@ -2390,7 +2398,8 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver, int (*bind)(struct usb_gadget *)) { struct ci13xxx *udc = _udc; - unsigned long i, k, flags; + unsigned long flags; + int i, j; int retval = -ENOMEM; trace("%p", driver); @@ -2430,41 +2439,43 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver, udc->gadget.dev.driver = NULL; retval = 0; - for (i = 0; i < hw_ep_max; i++) { - struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i]; + for (i = 0; i < hw_ep_max/2; i++) { + for (j = RX; j <= TX; j++) { + int k = i + j * hw_ep_max/2; + struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[k]; - scnprintf(mEp->name, sizeof(mEp->name), "ep%i", (int)i); + scnprintf(mEp->name, sizeof(mEp->name), "ep%i%s", i, + (j == TX) ? "in" : "out"); - mEp->lock = udc->lock; - mEp->device = &udc->gadget.dev; - mEp->td_pool = udc->td_pool; + mEp->lock = udc->lock; + mEp->device = &udc->gadget.dev; + mEp->td_pool = udc->td_pool; - mEp->ep.name = mEp->name; - mEp->ep.ops = &usb_ep_ops; - mEp->ep.maxpacket = CTRL_PAYLOAD_MAX; + mEp->ep.name = mEp->name; + mEp->ep.ops = &usb_ep_ops; + mEp->ep.maxpacket = CTRL_PAYLOAD_MAX; - /* this allocation cannot be random */ - for (k = RX; k <= TX; k++) { - INIT_LIST_HEAD(&mEp->qh[k].queue); + INIT_LIST_HEAD(&mEp->qh.queue); spin_unlock_irqrestore(udc->lock, flags); - mEp->qh[k].ptr = dma_pool_alloc(udc->qh_pool, - GFP_KERNEL, - &mEp->qh[k].dma); + mEp->qh.ptr = dma_pool_alloc(udc->qh_pool, GFP_KERNEL, + &mEp->qh.dma); spin_lock_irqsave(udc->lock, flags); - if (mEp->qh[k].ptr == NULL) + if (mEp->qh.ptr == NULL) retval = -ENOMEM; else - memset(mEp->qh[k].ptr, 0, - sizeof(*mEp->qh[k].ptr)); - } - if (i == 0) - udc->gadget.ep0 = &mEp->ep; - else + memset(mEp->qh.ptr, 0, sizeof(*mEp->qh.ptr)); + + /* skip ep0 out and in endpoints */ + if (i == 0) + continue; + list_add_tail(&mEp->ep.ep_list, &udc->gadget.ep_list); + } } if (retval) goto done; + udc->gadget.ep0 = &udc->ep0in.ep; /* bind gadget */ driver->driver.bus = NULL; udc->gadget.dev.driver = &driver->driver; @@ -2490,7 +2501,7 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver, } } - retval = hw_device_state(udc->ci13xxx_ep[0].qh[RX].dma); + retval = hw_device_state(udc->ep0out.qh.dma); if (retval) pm_runtime_put_sync(&udc->gadget.dev); @@ -2508,7 +2519,7 @@ EXPORT_SYMBOL(usb_gadget_probe_driver); int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) { struct ci13xxx *udc = _udc; - unsigned long i, k, flags; + unsigned long i, flags; trace("%p", driver); @@ -2544,17 +2555,14 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) for (i = 0; i < hw_ep_max; i++) { struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i]; - if (i == 0) - udc->gadget.ep0 = NULL; - else if (!list_empty(&mEp->ep.ep_list)) + if (!list_empty(&mEp->ep.ep_list)) list_del_init(&mEp->ep.ep_list); - for (k = RX; k <= TX; k++) - if (mEp->qh[k].ptr != NULL) - dma_pool_free(udc->qh_pool, - mEp->qh[k].ptr, mEp->qh[k].dma); + if (mEp->qh.ptr != NULL) + dma_pool_free(udc->qh_pool, mEp->qh.ptr, mEp->qh.dma); } + udc->gadget.ep0 = NULL; udc->driver = NULL; spin_unlock_irqrestore(udc->lock, flags); diff --git a/drivers/usb/gadget/ci13xxx_udc.h b/drivers/usb/gadget/ci13xxx_udc.h index f61fed07f76..a2492b65f98 100644 --- a/drivers/usb/gadget/ci13xxx_udc.h +++ b/drivers/usb/gadget/ci13xxx_udc.h @@ -20,7 +20,7 @@ * DEFINE *****************************************************************************/ #define CI13XXX_PAGE_SIZE 4096ul /* page size for TD's */ -#define ENDPT_MAX (16) +#define ENDPT_MAX (32) #define CTRL_PAYLOAD_MAX (64) #define RX (0) /* similar to USB_DIR_OUT but can be used as an index */ #define TX (1) /* similar to USB_DIR_IN but can be used as an index */ @@ -88,8 +88,7 @@ struct ci13xxx_ep { struct list_head queue; struct ci13xxx_qh *ptr; dma_addr_t dma; - } qh[2]; - struct usb_request *status; + } qh; int wedge; /* global resources */ @@ -119,9 +118,13 @@ struct ci13xxx { struct dma_pool *qh_pool; /* DMA pool for queue heads */ struct dma_pool *td_pool; /* DMA pool for transfer descs */ + struct usb_request *status; /* ep0 status request */ struct usb_gadget gadget; /* USB slave device */ struct ci13xxx_ep ci13xxx_ep[ENDPT_MAX]; /* extended endpts */ + u32 ep0_dir; /* ep0 direction */ +#define ep0out ci13xxx_ep[0] +#define ep0in ci13xxx_ep[16] struct usb_gadget_driver *driver; /* 3rd party gadget driver */ struct ci13xxx_udc_driver *udc_driver; /* device controller driver */ -- cgit v1.2.3-18-g5258 From d14fc1a74e846d7851f24fc9519fe87dc12a1231 Mon Sep 17 00:00:00 2001 From: Libor Pechacek Date: Fri, 14 Jan 2011 14:30:21 +0100 Subject: USB: serial: handle Data Carrier Detect changes Alan's commit 335f8514f200e63d689113d29cb7253a5c282967 introduced .carrier_raised function in several drivers. That also means tty_port_block_til_ready can now suspend the process trying to open the serial port when Carrier Detect is low and put it into tty_port.open_wait queue. We need to wake up the process when Carrier Detect goes high and trigger TTY hangup when CD goes low. Some of the devices do not report modem status line changes, or at least we don't understand the status message, so for those we remove .carrier_raised again. Signed-off-by: Libor Pechacek Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ch341.c | 10 ++++++++++ drivers/usb/serial/cp210x.c | 13 +------------ drivers/usb/serial/digi_acceleport.c | 10 ---------- drivers/usb/serial/generic.c | 20 ++++++++++++++++++++ drivers/usb/serial/keyspan_pda.c | 17 ----------------- drivers/usb/serial/pl2303.c | 11 +++++++++++ drivers/usb/serial/spcp8x5.c | 6 +++++- include/linux/usb/serial.h | 3 +++ 8 files changed, 50 insertions(+), 40 deletions(-) diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 63f7cc45bca..7b8815ddf36 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -486,12 +486,22 @@ static void ch341_read_int_callback(struct urb *urb) if (actual_length >= 4) { struct ch341_private *priv = usb_get_serial_port_data(port); unsigned long flags; + u8 prev_line_status = priv->line_status; spin_lock_irqsave(&priv->lock, flags); priv->line_status = (~(data[2])) & CH341_BITS_MODEM_STAT; if ((data[1] & CH341_MULT_STAT)) priv->multi_status_change = 1; spin_unlock_irqrestore(&priv->lock, flags); + + if ((priv->line_status ^ prev_line_status) & CH341_BIT_DCD) { + struct tty_struct *tty = tty_port_tty_get(&port->port); + if (tty) + usb_serial_handle_dcd_change(port, tty, + priv->line_status & CH341_BIT_DCD); + tty_kref_put(tty); + } + wake_up_interruptible(&priv->delta_msr_wait); } diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index c3bea46e87f..735ea03157a 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -49,7 +49,6 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *, static void cp210x_break_ctl(struct tty_struct *, int); static int cp210x_startup(struct usb_serial *); static void cp210x_dtr_rts(struct usb_serial_port *p, int on); -static int cp210x_carrier_raised(struct usb_serial_port *p); static int debug; @@ -166,8 +165,7 @@ static struct usb_serial_driver cp210x_device = { .tiocmget = cp210x_tiocmget, .tiocmset = cp210x_tiocmset, .attach = cp210x_startup, - .dtr_rts = cp210x_dtr_rts, - .carrier_raised = cp210x_carrier_raised + .dtr_rts = cp210x_dtr_rts }; /* Config request types */ @@ -766,15 +764,6 @@ static int cp210x_tiocmget (struct tty_struct *tty, struct file *file) return result; } -static int cp210x_carrier_raised(struct usb_serial_port *p) -{ - unsigned int control; - cp210x_get_config(p, CP210X_GET_MDMSTS, &control, 1); - if (control & CONTROL_DCD) - return 1; - return 0; -} - static void cp210x_break_ctl (struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index b92070c103c..666e5a6edd8 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -455,7 +455,6 @@ static int digi_write_room(struct tty_struct *tty); static int digi_chars_in_buffer(struct tty_struct *tty); static int digi_open(struct tty_struct *tty, struct usb_serial_port *port); static void digi_close(struct usb_serial_port *port); -static int digi_carrier_raised(struct usb_serial_port *port); static void digi_dtr_rts(struct usb_serial_port *port, int on); static int digi_startup_device(struct usb_serial *serial); static int digi_startup(struct usb_serial *serial); @@ -511,7 +510,6 @@ static struct usb_serial_driver digi_acceleport_2_device = { .open = digi_open, .close = digi_close, .dtr_rts = digi_dtr_rts, - .carrier_raised = digi_carrier_raised, .write = digi_write, .write_room = digi_write_room, .write_bulk_callback = digi_write_bulk_callback, @@ -1339,14 +1337,6 @@ static void digi_dtr_rts(struct usb_serial_port *port, int on) digi_set_modem_signals(port, on * (TIOCM_DTR|TIOCM_RTS), 1); } -static int digi_carrier_raised(struct usb_serial_port *port) -{ - struct digi_port *priv = usb_get_serial_port_data(port); - if (priv->dp_modem_signals & TIOCM_CD) - return 1; - return 0; -} - static int digi_open(struct tty_struct *tty, struct usb_serial_port *port) { int ret; diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index e6833e216fc..e4db5ad2bc5 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -479,6 +479,26 @@ int usb_serial_handle_break(struct usb_serial_port *port) } EXPORT_SYMBOL_GPL(usb_serial_handle_break); +/** + * usb_serial_handle_dcd_change - handle a change of carrier detect state + * @port: usb_serial_port structure for the open port + * @tty: tty_struct structure for the port + * @status: new carrier detect status, nonzero if active + */ +void usb_serial_handle_dcd_change(struct usb_serial_port *usb_port, + struct tty_struct *tty, unsigned int status) +{ + struct tty_port *port = &usb_port->port; + + dbg("%s - port %d, status %d", __func__, usb_port->number, status); + + if (status) + wake_up_interruptible(&port->open_wait); + else if (tty && !C_CLOCAL(tty)) + tty_hangup(tty); +} +EXPORT_SYMBOL_GPL(usb_serial_handle_dcd_change); + int usb_serial_generic_resume(struct usb_serial *serial) { struct usb_serial_port *port; diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index a10dd5676cc..554a8693a46 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -679,22 +679,6 @@ static void keyspan_pda_dtr_rts(struct usb_serial_port *port, int on) } } -static int keyspan_pda_carrier_raised(struct usb_serial_port *port) -{ - struct usb_serial *serial = port->serial; - unsigned char modembits; - - /* If we can read the modem status and the DCD is low then - carrier is not raised yet */ - if (keyspan_pda_get_modem_info(serial, &modembits) >= 0) { - if (!(modembits & (1>>6))) - return 0; - } - /* Carrier raised, or we failed (eg disconnected) so - progress accordingly */ - return 1; -} - static int keyspan_pda_open(struct tty_struct *tty, struct usb_serial_port *port) @@ -881,7 +865,6 @@ static struct usb_serial_driver keyspan_pda_device = { .id_table = id_table_std, .num_ports = 1, .dtr_rts = keyspan_pda_dtr_rts, - .carrier_raised = keyspan_pda_carrier_raised, .open = keyspan_pda_open, .close = keyspan_pda_close, .write = keyspan_pda_write, diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 45c40e6e973..08c9181b8e4 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -678,9 +678,11 @@ static void pl2303_update_line_status(struct usb_serial_port *port, { struct pl2303_private *priv = usb_get_serial_port_data(port); + struct tty_struct *tty; unsigned long flags; u8 status_idx = UART_STATE; u8 length = UART_STATE + 1; + u8 prev_line_status; u16 idv, idp; idv = le16_to_cpu(port->serial->dev->descriptor.idVendor); @@ -702,11 +704,20 @@ static void pl2303_update_line_status(struct usb_serial_port *port, /* Save off the uart status for others to look at */ spin_lock_irqsave(&priv->lock, flags); + prev_line_status = priv->line_status; priv->line_status = data[status_idx]; spin_unlock_irqrestore(&priv->lock, flags); if (priv->line_status & UART_BREAK_ERROR) usb_serial_handle_break(port); wake_up_interruptible(&priv->delta_msr_wait); + + tty = tty_port_tty_get(&port->port); + if (!tty) + return; + if ((priv->line_status ^ prev_line_status) & UART_DCD) + usb_serial_handle_dcd_change(port, tty, + priv->line_status & UART_DCD); + tty_kref_put(tty); } static void pl2303_read_int_callback(struct urb *urb) diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index c7665d39d19..cbfb70bffdd 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -133,7 +133,7 @@ struct spcp8x5_usb_ctrl_arg { /* how come ??? */ #define UART_STATE 0x08 -#define UART_STATE_TRANSIENT_MASK 0x74 +#define UART_STATE_TRANSIENT_MASK 0x75 #define UART_DCD 0x01 #define UART_DSR 0x02 #define UART_BREAK_ERROR 0x04 @@ -525,6 +525,10 @@ static void spcp8x5_process_read_urb(struct urb *urb) /* overrun is special, not associated with a char */ if (status & UART_OVERRUN_ERROR) tty_insert_flip_char(tty, 0, TTY_OVERRUN); + + if (status & UART_DCD) + usb_serial_handle_dcd_change(port, tty, + priv->line_status & MSR_STATUS_LINE_DCD); } tty_insert_flip_string_fixed_flag(tty, data, tty_flag, diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 16d682f4f7c..c9049139a7a 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -347,6 +347,9 @@ extern int usb_serial_generic_prepare_write_buffer(struct usb_serial_port *port, extern int usb_serial_handle_sysrq_char(struct usb_serial_port *port, unsigned int ch); extern int usb_serial_handle_break(struct usb_serial_port *port); +extern void usb_serial_handle_dcd_change(struct usb_serial_port *usb_port, + struct tty_struct *tty, + unsigned int status); extern int usb_serial_bus_register(struct usb_serial_driver *device); -- cgit v1.2.3-18-g5258 From 3c47eb06f08eb970ea9d696bcdb57a175d37b470 Mon Sep 17 00:00:00 2001 From: Maulik Mankad Date: Thu, 13 Jan 2011 18:19:56 +0530 Subject: usb: gadget: composite: avoid access beyond array max length One of the USB CV MSC tests issues Get Max LUN request with invalid wIndex (wIndex = 65535) parameter. Add proper handling to prevent array index out of bounds issue. Signed-off-by: Maulik Mankad Cc: David Brownell Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/composite.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index f6ff8456d52..1ba4befe336 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -928,8 +928,9 @@ unknown: */ switch (ctrl->bRequestType & USB_RECIP_MASK) { case USB_RECIP_INTERFACE: - if (cdev->config) - f = cdev->config->interface[intf]; + if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES) + break; + f = cdev->config->interface[intf]; break; case USB_RECIP_ENDPOINT: -- cgit v1.2.3-18-g5258 From c55c63c6539499379ab4a7e8a5c0f857351fb946 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 7 Jan 2011 09:57:41 +1000 Subject: vt: fix issue when fbcon wants to takeover a second time. With framebuffer handover and multiple GPUs, we get into a position where the fbcon unbinds the vesafb framebuffer for GPU 1, but we still have a radeon framebuffer bound from GPU 0, so we don't unregister the console driver. Then when we tried to bind the new radeon framebuffer for GPU1 we never get to the bind call as we fail due to the console being registered already. This changes the return value to -EBUSY when the driver is already registered and continues to bind for -EBUSY. Signed-off-by: Dave Airlie Cc: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/vt.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 76407eca9ab..4f6ae05eb4f 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -3545,7 +3545,7 @@ int register_con_driver(const struct consw *csw, int first, int last) /* already registered */ if (con_driver->con == csw) - retval = -EINVAL; + retval = -EBUSY; } if (retval) @@ -3656,7 +3656,12 @@ int take_over_console(const struct consw *csw, int first, int last, int deflt) int err; err = register_con_driver(csw, first, last); - + /* if we get an busy error we still want to bind the console driver + * and return success, as we may have unbound the console driver +  * but not unregistered it. + */ + if (err == -EBUSY) + err = 0; if (!err) bind_con_driver(csw, first, last, deflt); -- cgit v1.2.3-18-g5258 From a2a6a822adc2a91c677cb60e9bc6ffe26fa90e9f Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Sun, 9 Jan 2011 16:39:14 +0100 Subject: tty: use for_each_console() and WARN() on sysfs failures This fixes the build warnings in the tty code, and uses the proper function for iterating over the console devices. Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_io.c | 4 ++-- drivers/tty/vt/vt.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 464d09d9787..dae6fc96182 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -3257,7 +3257,7 @@ static ssize_t show_cons_active(struct device *dev, ssize_t count = 0; acquire_console_sem(); - for (c = console_drivers; c; c = c->next) { + for_each_console(c) { if (!c->device) continue; if (!c->write) @@ -3306,7 +3306,7 @@ int __init tty_init(void) if (IS_ERR(consdev)) consdev = NULL; else - device_create_file(consdev, &dev_attr_active); + WARN_ON(device_create_file(consdev, &dev_attr_active) < 0); #ifdef CONFIG_VT vty_init(&console_fops); diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 4f6ae05eb4f..955061863ed 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -2994,7 +2994,7 @@ int __init vty_init(const struct file_operations *console_fops) if (IS_ERR(tty0dev)) tty0dev = NULL; else - device_create_file(tty0dev, &dev_attr_active); + WARN_ON(device_create_file(tty0dev, &dev_attr_active) < 0); vcs_init(); -- cgit v1.2.3-18-g5258 From d0694e2aeb815042aa0f3e5036728b3db4446f1d Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Sun, 9 Jan 2011 08:38:48 +0100 Subject: serial: unbreak billionton CF card Unbreak Billionton CF bluetooth card. This actually fixes a regression on zaurus. Signed-off-by: Pavel Machek Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c index b25e6e49053..3975df6f7fd 100644 --- a/drivers/tty/serial/8250.c +++ b/drivers/tty/serial/8250.c @@ -236,7 +236,8 @@ static const struct serial8250_config uart_config[] = { .fifo_size = 128, .tx_loadsz = 128, .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, + /* UART_CAP_EFR breaks billionon CF bluetooth card. */ + .flags = UART_CAP_FIFO | UART_CAP_SLEEP, }, [PORT_16654] = { .name = "ST16654", -- cgit v1.2.3-18-g5258 From 1035b63d3c6fc34a9b8c4a181366eec6d6158b31 Mon Sep 17 00:00:00 2001 From: Paul Fulghum Date: Tue, 18 Jan 2011 14:03:25 -0800 Subject: n_hdlc: fix read and write locking Fix locking in read and write code of n_hdlc line discipline. 2.6.36 replaced lock_kernel() with tty_lock(). The tty mutex is not dropped automatically when the thread sleeps like the BKL. This results in a blocked read or write holding the tty mutex and stalling operations by other devices that use the tty mutex. A review of n_hdlc read and write code shows: 1. neither BKL or tty mutex are required for correct operation 2. read can block while read data is available if data is posted between availability check and call to interruptible_sleep_on() 3. write does not set process state to TASK_INTERRUPTIBLE on each pass through the processing loop which can cause unneeded scheduling of the thread The unnecessary tty mutex references have been removed. Read changed to use same code as n_tty read for completing reads and blocking. Write corrected to set process state to TASK_INTERRUPTIBLE on each pass through processing loop. Signed-off-by: Paul Fulghum Acked-by: Arnd Bergmann Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_hdlc.c | 90 ++++++++++++++++++++++++++-------------------------- 1 file changed, 45 insertions(+), 45 deletions(-) diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c index 47d32281032..52fc0c9a636 100644 --- a/drivers/tty/n_hdlc.c +++ b/drivers/tty/n_hdlc.c @@ -581,8 +581,9 @@ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file, __u8 __user *buf, size_t nr) { struct n_hdlc *n_hdlc = tty2n_hdlc(tty); - int ret; + int ret = 0; struct n_hdlc_buf *rbuf; + DECLARE_WAITQUEUE(wait, current); if (debuglevel >= DEBUG_LEVEL_INFO) printk("%s(%d)n_hdlc_tty_read() called\n",__FILE__,__LINE__); @@ -598,57 +599,55 @@ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file, return -EFAULT; } - tty_lock(); + add_wait_queue(&tty->read_wait, &wait); for (;;) { if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) { - tty_unlock(); - return -EIO; + ret = -EIO; + break; } + if (tty_hung_up_p(file)) + break; - n_hdlc = tty2n_hdlc (tty); - if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC || - tty != n_hdlc->tty) { - tty_unlock(); - return 0; - } + set_current_state(TASK_INTERRUPTIBLE); rbuf = n_hdlc_buf_get(&n_hdlc->rx_buf_list); - if (rbuf) + if (rbuf) { + if (rbuf->count > nr) { + /* too large for caller's buffer */ + ret = -EOVERFLOW; + } else { + if (copy_to_user(buf, rbuf->buf, rbuf->count)) + ret = -EFAULT; + else + ret = rbuf->count; + } + + if (n_hdlc->rx_free_buf_list.count > + DEFAULT_RX_BUF_COUNT) + kfree(rbuf); + else + n_hdlc_buf_put(&n_hdlc->rx_free_buf_list, rbuf); break; + } /* no data */ if (file->f_flags & O_NONBLOCK) { - tty_unlock(); - return -EAGAIN; + ret = -EAGAIN; + break; } - - interruptible_sleep_on (&tty->read_wait); + + schedule(); + if (signal_pending(current)) { - tty_unlock(); - return -EINTR; + ret = -EINTR; + break; } } - - if (rbuf->count > nr) - /* frame too large for caller's buffer (discard frame) */ - ret = -EOVERFLOW; - else { - /* Copy the data to the caller's buffer */ - if (copy_to_user(buf, rbuf->buf, rbuf->count)) - ret = -EFAULT; - else - ret = rbuf->count; - } - - /* return HDLC buffer to free list unless the free list */ - /* count has exceeded the default value, in which case the */ - /* buffer is freed back to the OS to conserve memory */ - if (n_hdlc->rx_free_buf_list.count > DEFAULT_RX_BUF_COUNT) - kfree(rbuf); - else - n_hdlc_buf_put(&n_hdlc->rx_free_buf_list,rbuf); - tty_unlock(); + + remove_wait_queue(&tty->read_wait, &wait); + __set_current_state(TASK_RUNNING); + return ret; } /* end of n_hdlc_tty_read() */ @@ -691,14 +690,15 @@ static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file, count = maxframe; } - tty_lock(); - add_wait_queue(&tty->write_wait, &wait); - set_current_state(TASK_INTERRUPTIBLE); + + for (;;) { + set_current_state(TASK_INTERRUPTIBLE); - /* Allocate transmit buffer */ - /* sleep until transmit buffer available */ - while (!(tbuf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list))) { + tbuf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list); + if (tbuf) + break; + if (file->f_flags & O_NONBLOCK) { error = -EAGAIN; break; @@ -719,7 +719,7 @@ static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file, } } - set_current_state(TASK_RUNNING); + __set_current_state(TASK_RUNNING); remove_wait_queue(&tty->write_wait, &wait); if (!error) { @@ -731,7 +731,7 @@ static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file, n_hdlc_buf_put(&n_hdlc->tx_buf_list,tbuf); n_hdlc_send_frames(n_hdlc,tty); } - tty_unlock(); + return error; } /* end of n_hdlc_tty_write() */ -- cgit v1.2.3-18-g5258 From fed7bb324cffd980a4a576514ced3ff52f68f319 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 19 Jan 2011 14:34:35 -0800 Subject: tty/serial: fix apbuart build Fix build errors by selecting SERIAL_CORE: ERROR: "uart_register_driver" [drivers/tty/serial/apbuart.ko] undefined! ERROR: "uart_write_wakeup" [drivers/tty/serial/apbuart.ko] undefined! ERROR: "uart_update_timeout" [drivers/tty/serial/apbuart.ko] undefined! ERROR: "uart_get_divisor" [drivers/tty/serial/apbuart.ko] undefined! ERROR: "uart_get_baud_rate" [drivers/tty/serial/apbuart.ko] undefined! ERROR: "uart_add_one_port" [drivers/tty/serial/apbuart.ko] undefined! ERROR: "uart_unregister_driver" [drivers/tty/serial/apbuart.ko] undefined! ERROR: "uart_remove_one_port" [drivers/tty/serial/apbuart.ko] undefined! Signed-off-by: Randy Dunlap Cc: Daniel Hellstrom Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index b1682d7f1d8..2b8334601c8 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1518,6 +1518,7 @@ config SERIAL_BCM63XX_CONSOLE config SERIAL_GRLIB_GAISLER_APBUART tristate "GRLIB APBUART serial support" depends on OF + select SERIAL_CORE ---help--- Add support for the GRLIB APBUART serial port. -- cgit v1.2.3-18-g5258 From 9d1f8a40ddab65a5cedb69b369ee4c0c6e4acf6b Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Sat, 22 Jan 2011 20:55:39 +0100 Subject: hwmon: (applesmc) Properly initialize lockdep attributes The switch to dynamically allocated sysfs attributes left the internal lockdep members uninitialized, causing a formal bug. This patch adds sysfs_attr_init() to the node creation function, remedying the problem. Reported-and-tested-by: Stefan Richter Signed-off-by: Henrik Rydberg Signed-off-by: Guenter Roeck --- drivers/hwmon/applesmc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index ce0372f0615..4c0743660e9 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -1072,6 +1072,7 @@ static int applesmc_create_nodes(struct applesmc_node_group *groups, int num) node->sda.dev_attr.show = grp->show; node->sda.dev_attr.store = grp->store; attr = &node->sda.dev_attr.attr; + sysfs_attr_init(attr); attr->name = node->name; attr->mode = S_IRUGO | (grp->store ? S_IWUSR : 0); ret = sysfs_create_file(&pdev->dev.kobj, attr); -- cgit v1.2.3-18-g5258 From 86ca33e82597c0aeb15fbdfb9619e86ef6b0f704 Mon Sep 17 00:00:00 2001 From: Luca Tettamanti Date: Sat, 22 Jan 2011 16:07:11 +0100 Subject: hwmon: (asus_atk0110) Override interface detection on Sabertooth X58 ASUS Sabertooth X58 has a bug in ACPI that prevents the reading of MCH temperature when the "old" ATK0110 interface is used. Add a DMI entry to override the detection heuristic and force the use of the "new" interface on this board. Signed-off-by: Luca Tettamanti Tested-by: Joris Creyghton Signed-off-by: Guenter Roeck --- drivers/hwmon/asus_atk0110.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c index 2d68cf3c223..b5e892017e0 100644 --- a/drivers/hwmon/asus_atk0110.c +++ b/drivers/hwmon/asus_atk0110.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include @@ -22,6 +23,21 @@ #define ATK_HID "ATK0110" +static bool new_if; +module_param(new_if, bool, 0); +MODULE_PARM_DESC(new_if, "Override detection heuristic and force the use of the new ATK0110 interface"); + +static const struct dmi_system_id __initconst atk_force_new_if[] = { + { + /* Old interface has broken MCH temp monitoring */ + .ident = "Asus Sabertooth X58", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "SABERTOOTH X58") + } + }, + { } +}; + /* Minimum time between readings, enforced in order to avoid * hogging the CPU. */ @@ -1302,7 +1318,9 @@ static int atk_probe_if(struct atk_data *data) * analysis of multiple DSDTs indicates that when both interfaces * are present the new one (GGRP/GITM) is not functional. */ - if (data->rtmp_handle && data->rvlt_handle && data->rfan_handle) + if (new_if) + dev_info(dev, "Overriding interface detection\n"); + if (data->rtmp_handle && data->rvlt_handle && data->rfan_handle && !new_if) data->old_interface = true; else if (data->enumerate_handle && data->read_handle && data->write_handle) @@ -1420,6 +1438,9 @@ static int __init atk0110_init(void) return -EBUSY; } + if (dmi_check_system(atk_force_new_if)) + new_if = true; + ret = acpi_bus_register_driver(&atk_driver); if (ret) pr_info("acpi_bus_register_driver failed: %d\n", ret); -- cgit v1.2.3-18-g5258 From 13be9f00c33fe69112fe6c755d6a8f3e249abbb2 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 14 Jan 2011 14:30:03 +0100 Subject: ARM i.MX28: fix bit operation reg | (1 << clk->enable_shift) always evaluates to true. Switch it to & which makes much more sense Signed-off-by: Sascha Hauer Acked-by: Shawn Guo --- arch/arm/mach-mxs/clock-mx28.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index 56312c092a9..4146b38605d 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -355,7 +355,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ } else { \ reg &= ~BM_CLKCTRL_##dr##_DIV; \ reg |= div << BP_CLKCTRL_##dr##_DIV; \ - if (reg | (1 << clk->enable_shift)) { \ + if (reg & (1 << clk->enable_shift)) { \ pr_err("%s: clock is gated\n", __func__); \ return -EINVAL; \ } \ -- cgit v1.2.3-18-g5258 From 34d80730c30fa37740cb43bb0eec62352df3a7c6 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 14 Jan 2011 15:23:12 +0100 Subject: ARM i.MX28: use correct register for setting the rate _CLK_SET_RATE does not only handle the cpu clock but also other clocks, so do not hardcode the HW_CLKCTRL_CPU register. Signed-off-by: Sascha Hauer Acked-by: Shawn Guo --- arch/arm/mach-mxs/clock-mx28.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index 4146b38605d..44acd9cd177 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -360,7 +360,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ return -EINVAL; \ } \ } \ - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU); \ + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ \ for (i = 10000; i; i--) \ if (!(__raw_readl(CLKCTRL_BASE_ADDR + \ -- cgit v1.2.3-18-g5258 From 5080e9c981473cd3e5d1571ff8d6dc39ba2777b1 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 20 Jan 2011 16:58:50 +0100 Subject: ARM i.MX23/28: remove secondary field from struct clk. It's unused Signed-off-by: Sascha Hauer Acked-by: Shawn Guo --- arch/arm/mach-mxs/clock.c | 2 -- arch/arm/mach-mxs/include/mach/clock.h | 2 -- 2 files changed, 4 deletions(-) diff --git a/arch/arm/mach-mxs/clock.c b/arch/arm/mach-mxs/clock.c index e7d2269cf70..a7093c88e6a 100644 --- a/arch/arm/mach-mxs/clock.c +++ b/arch/arm/mach-mxs/clock.c @@ -57,7 +57,6 @@ static void __clk_disable(struct clk *clk) if (clk->disable) clk->disable(clk); __clk_disable(clk->parent); - __clk_disable(clk->secondary); } } @@ -68,7 +67,6 @@ static int __clk_enable(struct clk *clk) if (clk->usecount++ == 0) { __clk_enable(clk->parent); - __clk_enable(clk->secondary); if (clk->enable) clk->enable(clk); diff --git a/arch/arm/mach-mxs/include/mach/clock.h b/arch/arm/mach-mxs/include/mach/clock.h index 041e276d8a3..592c9ab5d76 100644 --- a/arch/arm/mach-mxs/include/mach/clock.h +++ b/arch/arm/mach-mxs/include/mach/clock.h @@ -29,8 +29,6 @@ struct clk { int id; /* Source clock this clk depends on */ struct clk *parent; - /* Secondary clock to enable/disable with this clock */ - struct clk *secondary; /* Reference count of clock enable/disable */ __s8 usecount; /* Register bit position for clock's enable/disable control. */ -- cgit v1.2.3-18-g5258 From 71b71518c7b97bae7317b452bf7fba067e38030a Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 24 Jan 2011 08:26:33 +0100 Subject: ARM i.MX23: use correct register for setting the rate Signed-off-by: Sascha Hauer Acked-by: Shawn Guo --- arch/arm/mach-mxs/clock-mx23.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c index b1a362ebfde..72069243aec 100644 --- a/arch/arm/mach-mxs/clock-mx23.c +++ b/arch/arm/mach-mxs/clock-mx23.c @@ -304,7 +304,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ reg &= ~BM_CLKCTRL_##dr##_DIV; \ reg |= div << BP_CLKCTRL_##dr##_DIV; \ - if (reg | (1 << clk->enable_shift)) { \ + if (reg & (1 << clk->enable_shift)) { \ pr_err("%s: clock is gated\n", __func__); \ return -EINVAL; \ } \ -- cgit v1.2.3-18-g5258 From c6e7695de8cad32be412d9e08a15d368ffe12aa6 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 21 Jan 2011 16:03:57 -0200 Subject: ARM: imx: Add VPR200 and MX51_3DS entries to uncompress.h MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Fabio Estevam Tested-by: Marc Reilly Acked-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/include/mach/uncompress.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index 3a70ebf0477..ff469c4f1d7 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -95,6 +95,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) case MACH_TYPE_MX35_3DS: case MACH_TYPE_PCM043: case MACH_TYPE_LILLY1131: + case MACH_TYPE_VPR200: uart_base = MX3X_UART1_BASE_ADDR; break; case MACH_TYPE_MAGX_ZN5: @@ -102,6 +103,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) break; case MACH_TYPE_MX51_BABBAGE: case MACH_TYPE_EUKREA_CPUIMX51SD: + case MACH_TYPE_MX51_3DS: uart_base = MX51_UART1_BASE_ADDR; break; case MACH_TYPE_MX50_RDP: -- cgit v1.2.3-18-g5258 From 5f804df3cca990bc2f0bd1f126c134af1d2a3ca2 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 22 Jan 2011 16:18:56 -0200 Subject: ARM: mach-imx/mach-mx25_3ds: Fix section type MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Fabio Estevam Acked-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/mach-mx25_3ds.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index aa76cfd9f34..8382e790207 100644 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -180,7 +180,7 @@ static const uint32_t mx25pdk_keymap[] = { KEY(3, 3, KEY_POWER), }; -static const struct matrix_keymap_data mx25pdk_keymap_data __initdata = { +static const struct matrix_keymap_data mx25pdk_keymap_data __initconst = { .keymap = mx25pdk_keymap, .keymap_size = ARRAY_SIZE(mx25pdk_keymap), }; -- cgit v1.2.3-18-g5258 From 0909c1ec6f016b3f580fa2f4630659a5874a8ef8 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Thu, 6 Jan 2011 09:58:42 +0100 Subject: can: at91_can: clean up usage of AT91_MB_RX_FIRST and AT91_MB_RX_NUM This patch cleans up the usage of two macros which specify the mailbox usage. AT91_MB_RX_FIRST and AT91_MB_RX_NUM define the first and the number of RX mailboxes. The current driver uses these variables in an unclean way; assuming that AT91_MB_RX_FIRST is 0; This patch cleans up the usage of these macros, no longer assuming AT91_MB_RX_FIRST == 0. Signed-off-by: Marc Kleine-Budde Acked-by: Wolfgang Grandegger --- drivers/net/can/at91_can.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c index 7ef83d06f7e..892c3d8c64a 100644 --- a/drivers/net/can/at91_can.c +++ b/drivers/net/can/at91_can.c @@ -2,7 +2,7 @@ * at91_can.c - CAN network driver for AT91 SoC CAN controller * * (C) 2007 by Hans J. Koch - * (C) 2008, 2009, 2010 by Marc Kleine-Budde + * (C) 2008, 2009, 2010, 2011 by Marc Kleine-Budde * * This software may be distributed under the terms of the GNU General * Public License ("GPL") version 2 as distributed in the 'COPYING' @@ -55,7 +55,8 @@ #define AT91_MB_RX_MASK(i) ((1 << (i)) - 1) #define AT91_MB_RX_SPLIT 8 #define AT91_MB_RX_LOW_LAST (AT91_MB_RX_SPLIT - 1) -#define AT91_MB_RX_LOW_MASK (AT91_MB_RX_MASK(AT91_MB_RX_SPLIT)) +#define AT91_MB_RX_LOW_MASK (AT91_MB_RX_MASK(AT91_MB_RX_SPLIT) & \ + ~AT91_MB_RX_MASK(AT91_MB_RX_FIRST)) #define AT91_MB_TX_NUM (1 << AT91_MB_TX_SHIFT) #define AT91_MB_TX_FIRST (AT91_MB_RX_LAST + 1) @@ -254,7 +255,8 @@ static void at91_setup_mailboxes(struct net_device *dev) set_mb_mode_prio(priv, i, AT91_MB_MODE_TX, 0); /* Reset tx and rx helper pointers */ - priv->tx_next = priv->tx_echo = priv->rx_next = 0; + priv->tx_next = priv->tx_echo = 0; + priv->rx_next = AT91_MB_RX_FIRST; } static int at91_set_bittiming(struct net_device *dev) @@ -590,10 +592,10 @@ static int at91_poll_rx(struct net_device *dev, int quota) "order of incoming frames cannot be guaranteed\n"); again: - for (mb = find_next_bit(addr, AT91_MB_RX_NUM, priv->rx_next); - mb < AT91_MB_RX_NUM && quota > 0; + for (mb = find_next_bit(addr, AT91_MB_RX_LAST + 1, priv->rx_next); + mb < AT91_MB_RX_LAST + 1 && quota > 0; reg_sr = at91_read(priv, AT91_SR), - mb = find_next_bit(addr, AT91_MB_RX_NUM, ++priv->rx_next)) { + mb = find_next_bit(addr, AT91_MB_RX_LAST + 1, ++priv->rx_next)) { at91_read_msg(dev, mb); /* reactivate mailboxes */ @@ -610,8 +612,8 @@ static int at91_poll_rx(struct net_device *dev, int quota) /* upper group completed, look again in lower */ if (priv->rx_next > AT91_MB_RX_LOW_LAST && - quota > 0 && mb >= AT91_MB_RX_NUM) { - priv->rx_next = 0; + quota > 0 && mb > AT91_MB_RX_LAST) { + priv->rx_next = AT91_MB_RX_FIRST; goto again; } -- cgit v1.2.3-18-g5258 From 9e0a2d1ca3de6e284e99ad5cae1ae33ecb74c479 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Sun, 9 Jan 2011 22:46:25 +0100 Subject: can: at91_can: don't use mailbox 0 Due to a chip bug (errata 50.2.6.3 & 50.3.5.3 in "AT91SAM9263 Preliminary 6249H-ATARM-27-Jul-09") the contents of mailbox 0 may be send under certain conditions (even if disabled or in rx mode). The workaround in the errata suggests not to use the mailbox and load it with a unused identifier. This patch implements the first part of the workaround, it updates AT91_MB_RX_NUM and AT91_MB_RX_FIRST (and the inline documentation) so that mailbox 0 stays unused. Signed-off-by: Marc Kleine-Budde Acked-by: Wolfgang Grandegger Acked-by: Kurt Van Dijck --- drivers/net/can/at91_can.c | 32 ++++++++++++++++++++------------ 1 file changed, 20 insertions(+), 12 deletions(-) diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c index 892c3d8c64a..16e45a51cbb 100644 --- a/drivers/net/can/at91_can.c +++ b/drivers/net/can/at91_can.c @@ -40,16 +40,16 @@ #include -#define AT91_NAPI_WEIGHT 12 +#define AT91_NAPI_WEIGHT 11 /* * RX/TX Mailbox split * don't dare to touch */ -#define AT91_MB_RX_NUM 12 +#define AT91_MB_RX_NUM 11 #define AT91_MB_TX_SHIFT 2 -#define AT91_MB_RX_FIRST 0 +#define AT91_MB_RX_FIRST 1 #define AT91_MB_RX_LAST (AT91_MB_RX_FIRST + AT91_MB_RX_NUM - 1) #define AT91_MB_RX_MASK(i) ((1 << (i)) - 1) @@ -236,10 +236,14 @@ static void at91_setup_mailboxes(struct net_device *dev) unsigned int i; /* - * The first 12 mailboxes are used as a reception FIFO. The - * last mailbox is configured with overwrite option. The - * overwrite flag indicates a FIFO overflow. + * Due to a chip bug (errata 50.2.6.3 & 50.3.5.3) the first + * mailbox is disabled. The next 11 mailboxes are used as a + * reception FIFO. The last mailbox is configured with + * overwrite option. The overwrite flag indicates a FIFO + * overflow. */ + for (i = 0; i < AT91_MB_RX_FIRST; i++) + set_mb_mode(priv, i, AT91_MB_MODE_DISABLED); for (i = AT91_MB_RX_FIRST; i < AT91_MB_RX_LAST; i++) set_mb_mode(priv, i, AT91_MB_MODE_RX); set_mb_mode(priv, AT91_MB_RX_LAST, AT91_MB_MODE_RX_OVRWR); @@ -541,27 +545,31 @@ static void at91_read_msg(struct net_device *dev, unsigned int mb) * * Theory of Operation: * - * 12 of the 16 mailboxes on the chip are reserved for RX. we split - * them into 2 groups. The lower group holds 8 and upper 4 mailboxes. + * 11 of the 16 mailboxes on the chip are reserved for RX. we split + * them into 2 groups. The lower group holds 7 and upper 4 mailboxes. * * Like it or not, but the chip always saves a received CAN message * into the first free mailbox it finds (starting with the * lowest). This makes it very difficult to read the messages in the * right order from the chip. This is how we work around that problem: * - * The first message goes into mb nr. 0 and issues an interrupt. All + * The first message goes into mb nr. 1 and issues an interrupt. All * rx ints are disabled in the interrupt handler and a napi poll is * scheduled. We read the mailbox, but do _not_ reenable the mb (to * receive another message). * * lower mbxs upper - * ______^______ __^__ - * / \ / \ + * ____^______ __^__ + * / \ / \ * +-+-+-+-+-+-+-+-++-+-+-+-+ - * |x|x|x|x|x|x|x|x|| | | | | + * | |x|x|x|x|x|x|x|| | | | | * +-+-+-+-+-+-+-+-++-+-+-+-+ * 0 0 0 0 0 0 0 0 0 0 1 1 \ mail * 0 1 2 3 4 5 6 7 8 9 0 1 / box + * ^ + * | + * \ + * unused, due to chip bug * * The variable priv->rx_next points to the next mailbox to read a * message from. As long we're in the lower mailboxes we just read the -- cgit v1.2.3-18-g5258 From 3a5655a5b545e9647c3437473ee3d815fe1b9050 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Mon, 10 Jan 2011 20:44:22 +0100 Subject: can: at91_can: make can_id of mailbox 0 configurable Due to a chip bug (errata 50.2.6.3 & 50.3.5.3 in "AT91SAM9263 Preliminary 6249H-ATARM-27-Jul-09") the contents of mailbox 0 may be send under certain conditions (even if disabled or in rx mode). The workaround in the errata suggests not to use the mailbox and load it with an unused identifier. This patch implements the second part of the workaround. A sysfs entry "mb0_id" is introduced. While the interface is down it can be used to configure the can_id of mailbox 0. The default value id 0x7ff. In order to use an extended can_id add the CAN_EFF_FLAG (0x80000000U) to the can_id. Example: - standard id 0x7ff: echo 0x7ff > /sys/class/net/can0/mb0_id - extended id 0x1fffffff: echo 0x9fffffff > /sys/class/net/can0/mb0_id Signed-off-by: Marc Kleine-Budde Acked-by: Wolfgang Grandegger Acked-by: Kurt Van Dijck For the Documentation-part: Acked-by: Wolfram Sang --- Documentation/ABI/testing/sysfs-platform-at91 | 25 ++++++++ drivers/net/can/at91_can.c | 90 ++++++++++++++++++++++++--- 2 files changed, 108 insertions(+), 7 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-platform-at91 diff --git a/Documentation/ABI/testing/sysfs-platform-at91 b/Documentation/ABI/testing/sysfs-platform-at91 new file mode 100644 index 00000000000..4cc6a865ae6 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-at91 @@ -0,0 +1,25 @@ +What: /sys/devices/platform/at91_can/net//mb0_id +Date: January 2011 +KernelVersion: 2.6.38 +Contact: Marc Kleine-Budde +Description: + Value representing the can_id of mailbox 0. + + Default: 0x7ff (standard frame) + + Due to a chip bug (errata 50.2.6.3 & 50.3.5.3 in + "AT91SAM9263 Preliminary 6249H-ATARM-27-Jul-09") the + contents of mailbox 0 may be send under certain + conditions (even if disabled or in rx mode). + + The workaround in the errata suggests not to use the + mailbox and load it with an unused identifier. + + In order to use an extended can_id add the + CAN_EFF_FLAG (0x80000000U) to the can_id. Example: + + - standard id 0x7ff: + echo 0x7ff > /sys/class/net/can0/mb0_id + + - extended id 0x1fffffff: + echo 0x9fffffff > /sys/class/net/can0/mb0_id diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c index 16e45a51cbb..2532b963153 100644 --- a/drivers/net/can/at91_can.c +++ b/drivers/net/can/at91_can.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include @@ -169,6 +170,8 @@ struct at91_priv { struct clk *clk; struct at91_can_data *pdata; + + canid_t mb0_id; }; static struct can_bittiming_const at91_bittiming_const = { @@ -221,6 +224,18 @@ static inline void set_mb_mode(const struct at91_priv *priv, unsigned int mb, set_mb_mode_prio(priv, mb, mode, 0); } +static inline u32 at91_can_id_to_reg_mid(canid_t can_id) +{ + u32 reg_mid; + + if (can_id & CAN_EFF_FLAG) + reg_mid = (can_id & CAN_EFF_MASK) | AT91_MID_MIDE; + else + reg_mid = (can_id & CAN_SFF_MASK) << 18; + + return reg_mid; +} + /* * Swtich transceiver on or off */ @@ -234,6 +249,7 @@ static void at91_setup_mailboxes(struct net_device *dev) { struct at91_priv *priv = netdev_priv(dev); unsigned int i; + u32 reg_mid; /* * Due to a chip bug (errata 50.2.6.3 & 50.3.5.3) the first @@ -242,8 +258,13 @@ static void at91_setup_mailboxes(struct net_device *dev) * overwrite option. The overwrite flag indicates a FIFO * overflow. */ - for (i = 0; i < AT91_MB_RX_FIRST; i++) + reg_mid = at91_can_id_to_reg_mid(priv->mb0_id); + for (i = 0; i < AT91_MB_RX_FIRST; i++) { set_mb_mode(priv, i, AT91_MB_MODE_DISABLED); + at91_write(priv, AT91_MID(i), reg_mid); + at91_write(priv, AT91_MCR(i), 0x0); /* clear dlc */ + } + for (i = AT91_MB_RX_FIRST; i < AT91_MB_RX_LAST; i++) set_mb_mode(priv, i, AT91_MB_MODE_RX); set_mb_mode(priv, AT91_MB_RX_LAST, AT91_MB_MODE_RX_OVRWR); @@ -378,12 +399,7 @@ static netdev_tx_t at91_start_xmit(struct sk_buff *skb, struct net_device *dev) netdev_err(dev, "BUG! TX buffer full when queue awake!\n"); return NETDEV_TX_BUSY; } - - if (cf->can_id & CAN_EFF_FLAG) - reg_mid = (cf->can_id & CAN_EFF_MASK) | AT91_MID_MIDE; - else - reg_mid = (cf->can_id & CAN_SFF_MASK) << 18; - + reg_mid = at91_can_id_to_reg_mid(cf->can_id); reg_mcr = ((cf->can_id & CAN_RTR_FLAG) ? AT91_MCR_MRTR : 0) | (cf->can_dlc << 16) | AT91_MCR_MTCR; @@ -1047,6 +1063,64 @@ static const struct net_device_ops at91_netdev_ops = { .ndo_start_xmit = at91_start_xmit, }; +static ssize_t at91_sysfs_show_mb0_id(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct at91_priv *priv = netdev_priv(to_net_dev(dev)); + + if (priv->mb0_id & CAN_EFF_FLAG) + return snprintf(buf, PAGE_SIZE, "0x%08x\n", priv->mb0_id); + else + return snprintf(buf, PAGE_SIZE, "0x%03x\n", priv->mb0_id); +} + +static ssize_t at91_sysfs_set_mb0_id(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct net_device *ndev = to_net_dev(dev); + struct at91_priv *priv = netdev_priv(ndev); + unsigned long can_id; + ssize_t ret; + int err; + + rtnl_lock(); + + if (ndev->flags & IFF_UP) { + ret = -EBUSY; + goto out; + } + + err = strict_strtoul(buf, 0, &can_id); + if (err) { + ret = err; + goto out; + } + + if (can_id & CAN_EFF_FLAG) + can_id &= CAN_EFF_MASK | CAN_EFF_FLAG; + else + can_id &= CAN_SFF_MASK; + + priv->mb0_id = can_id; + ret = count; + + out: + rtnl_unlock(); + return ret; +} + +static DEVICE_ATTR(mb0_id, S_IWUGO | S_IRUGO, + at91_sysfs_show_mb0_id, at91_sysfs_set_mb0_id); + +static struct attribute *at91_sysfs_attrs[] = { + &dev_attr_mb0_id.attr, + NULL, +}; + +static struct attribute_group at91_sysfs_attr_group = { + .attrs = at91_sysfs_attrs, +}; + static int __devinit at91_can_probe(struct platform_device *pdev) { struct net_device *dev; @@ -1092,6 +1166,7 @@ static int __devinit at91_can_probe(struct platform_device *pdev) dev->netdev_ops = &at91_netdev_ops; dev->irq = irq; dev->flags |= IFF_ECHO; + dev->sysfs_groups[0] = &at91_sysfs_attr_group; priv = netdev_priv(dev); priv->can.clock.freq = clk_get_rate(clk); @@ -1103,6 +1178,7 @@ static int __devinit at91_can_probe(struct platform_device *pdev) priv->dev = dev; priv->clk = clk; priv->pdata = pdev->dev.platform_data; + priv->mb0_id = 0x7ff; netif_napi_add(dev, &priv->napi, at91_poll, AT91_NAPI_WEIGHT); -- cgit v1.2.3-18-g5258 From 4dc2757a2e9a9d1f2faee4fc6119276fc0061c16 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Tue, 4 Jan 2011 11:32:13 +0530 Subject: [SCSI] mpt2sas: Fix device removal handshake for zoned devices When zoning end devices, the driver is not sending device removal handshake alogrithm to firmware. This results in controller firmware not sending sas topology add events the next time the device is added. The fix is the driver should be doing the device removal handshake even though the PHYSTATUS_VACANT bit is set in the PhyStatus of the event data. The current design is avoiding the handshake when the VACANT bit is set in the phy status. Signed-off-by: Kashyap Desai Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index eda347c5797..95d82743d7b 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -2981,9 +2981,6 @@ _scsih_check_topo_delete_events(struct MPT2SAS_ADAPTER *ioc, u16 handle; for (i = 0 ; i < event_data->NumEntries; i++) { - if (event_data->PHY[i].PhyStatus & - MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT) - continue; handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle); if (!handle) continue; -- cgit v1.2.3-18-g5258 From efe82a16bc0f9f9e1fc8fa706eb0309fcd57770a Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Tue, 4 Jan 2011 11:34:17 +0530 Subject: [SCSI] mpt2sas: fix internal device reset for older firmware prior to MPI Rev K The "internal device reset complete" event is not supported for older firmware prior to MPI Rev K We added a check in the driver so the "internal device reset" event is ignored for older firmware. When ignored, the tm_busy flag doesn't get set nor cleared. Without this fix, IO queues would be froozen indefinetly after the "internal device reset" event, as the "complete" event never sent to clear the flag. Signed-off-by: Kashyap Desai Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 95d82743d7b..a16f2a05736 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -5002,6 +5002,12 @@ _scsih_sas_device_status_change_event(struct MPT2SAS_ADAPTER *ioc, event_data); #endif + /* In MPI Revision K (0xC), the internal device reset complete was + * implemented, so avoid setting tm_busy flag for older firmware. + */ + if ((ioc->facts.HeaderVersion >> 8) < 0xC) + return; + if (event_data->ReasonCode != MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET && event_data->ReasonCode != -- cgit v1.2.3-18-g5258 From 11e1b961ab067ee3acaf723531da4d3f23e1d6f7 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Tue, 4 Jan 2011 11:34:57 +0530 Subject: [SCSI] mpt2sas: Correct resizing calculation for max_queue_depth The ioc->hba_queue_depth is not properly resized when the controller firmware reports that it supports more outstanding IO than what can be fit inside the reply descriptor pool depth. This is reproduced by setting the controller global credits larger than 30,000. The bug results in an incorrect sizing of the queues. The fix is to resize the queue_size by dividing queue_diff by two. Signed-off-by: Kashyap Desai Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_base.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index b2a817055b8..a11ac670104 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -2176,9 +2176,9 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) /* adjust hba_queue_depth, reply_free_queue_depth, * and queue_size */ - ioc->hba_queue_depth -= queue_diff; - ioc->reply_free_queue_depth -= queue_diff; - queue_size -= queue_diff; + ioc->hba_queue_depth -= (queue_diff / 2); + ioc->reply_free_queue_depth -= (queue_diff / 2); + queue_size = facts->MaxReplyDescriptorPostQueueDepth; } ioc->reply_post_queue_depth = queue_size; -- cgit v1.2.3-18-g5258 From ec07a053597bdab51cbd23619f9f9f392712508a Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Wed, 5 Jan 2011 17:54:32 +0530 Subject: [SCSI] mpt2sas: Fix the race between broadcast asyn event and scsi command completion False timeout after hard resets, there were two issues which leads to timeout. (1) Panic because of invalid memory access in the broadcast asyn event processing routine due to a race between accessing the scsi command pointer from broadcast asyn event processing thread and completing the same scsi command from the interrupt context. (2) Broadcast asyn event notifcations are not handled due to events ignored while the broadcast asyn event is activity being processed from the event process kernel thread. In addition, changed the ABRT_TASK_SET to ABORT_TASK in the broadcast async event processing routine. This is less disruptive to other request that generate Broadcast Asyn Primitives besides target reset. e.g clear reservations, microcode download,and mode select. Signed-off-by: Kashyap Desai Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 54 ++++++++++++++++++++++++++++++------ 1 file changed, 45 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index a16f2a05736..db287d79bdc 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -819,7 +819,7 @@ _scsih_is_end_device(u32 device_info) } /** - * mptscsih_get_scsi_lookup - returns scmd entry + * _scsih_scsi_lookup_get - returns scmd entry * @ioc: per adapter object * @smid: system request message index * @@ -831,6 +831,28 @@ _scsih_scsi_lookup_get(struct MPT2SAS_ADAPTER *ioc, u16 smid) return ioc->scsi_lookup[smid - 1].scmd; } +/** + * _scsih_scsi_lookup_get_clear - returns scmd entry + * @ioc: per adapter object + * @smid: system request message index + * + * Returns the smid stored scmd pointer. + * Then will derefrence the stored scmd pointer. + */ +static inline struct scsi_cmnd * +_scsih_scsi_lookup_get_clear(struct MPT2SAS_ADAPTER *ioc, u16 smid) +{ + unsigned long flags; + struct scsi_cmnd *scmd; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + scmd = ioc->scsi_lookup[smid - 1].scmd; + ioc->scsi_lookup[smid - 1].scmd = NULL; + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + + return scmd; +} + /** * _scsih_scsi_lookup_find_by_scmd - scmd lookup * @ioc: per adapter object @@ -3207,7 +3229,7 @@ _scsih_flush_running_cmds(struct MPT2SAS_ADAPTER *ioc) u16 count = 0; for (smid = 1; smid <= ioc->scsiio_depth; smid++) { - scmd = _scsih_scsi_lookup_get(ioc, smid); + scmd = _scsih_scsi_lookup_get_clear(ioc, smid); if (!scmd) continue; count++; @@ -3801,7 +3823,7 @@ _scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) u32 response_code = 0; mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); - scmd = _scsih_scsi_lookup_get(ioc, smid); + scmd = _scsih_scsi_lookup_get_clear(ioc, smid); if (scmd == NULL) return 1; @@ -5102,6 +5124,7 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work *fw_event) { struct scsi_cmnd *scmd; + struct scsi_device *sdev; u16 smid, handle; u32 lun; struct MPT2SAS_DEVICE *sas_device_priv_data; @@ -5112,12 +5135,17 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, Mpi2EventDataSasBroadcastPrimitive_t *event_data = fw_event->event_data; #endif u16 ioc_status; + unsigned long flags; + int r; + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "broadcast primative: " "phy number(%d), width(%d)\n", ioc->name, event_data->PhyNum, event_data->PortWidth)); dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name, __func__)); + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + ioc->broadcast_aen_busy = 0; termination_count = 0; query_count = 0; mpi_reply = ioc->tm_cmds.reply; @@ -5125,7 +5153,8 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, scmd = _scsih_scsi_lookup_get(ioc, smid); if (!scmd) continue; - sas_device_priv_data = scmd->device->hostdata; + sdev = scmd->device; + sas_device_priv_data = sdev->hostdata; if (!sas_device_priv_data || !sas_device_priv_data->sas_target) continue; /* skip hidden raid components */ @@ -5141,6 +5170,7 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, lun = sas_device_priv_data->lun; query_count++; + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); mpt2sas_scsih_issue_tm(ioc, handle, 0, 0, lun, MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, smid, 30, NULL); ioc->tm_cmds.status = MPT2_CMD_NOT_USED; @@ -5150,14 +5180,20 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, (mpi_reply->ResponseCode == MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED || mpi_reply->ResponseCode == - MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC)) + MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC)) { + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); continue; - - mpt2sas_scsih_issue_tm(ioc, handle, 0, 0, lun, - MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET, 0, 30, NULL); + } + r = mpt2sas_scsih_issue_tm(ioc, handle, sdev->channel, sdev->id, + sdev->lun, MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK, smid, 30, + scmd); + if (r == FAILED) + sdev_printk(KERN_WARNING, sdev, "task abort: FAILED " + "scmd(%p)\n", scmd); termination_count += le32_to_cpu(mpi_reply->TerminationCount); + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); } - ioc->broadcast_aen_busy = 0; + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s - exit, query_count = %d termination_count = %d\n", -- cgit v1.2.3-18-g5258 From 4224489f45b503f0a1f1cf310f76dc108f45689a Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Tue, 4 Jan 2011 11:38:39 +0530 Subject: [SCSI] mpt2sas: Kernel Panic during Large Topology discovery There was a configuration page timing out during the initial port enable at driver load time. The port enable would fail, and this would result in the driver unloading itself, meanwhile the driver was accessing freed memory in another context resulting in the panic. The fix is to prevent access to freed memory once the driver had issued the diag reset which woke up the sleeping port enable process. The routine _base_reset_handler was reorganized so the last sleeping process woken up was the port_enable. Signed-off-by: Kashyap Desai Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_base.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index a11ac670104..9ead0399808 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -3941,6 +3941,8 @@ mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc) static void _base_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase) { + mpt2sas_scsih_reset_handler(ioc, reset_phase); + mpt2sas_ctl_reset_handler(ioc, reset_phase); switch (reset_phase) { case MPT2_IOC_PRE_RESET: dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: " @@ -3971,8 +3973,6 @@ _base_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase) "MPT2_IOC_DONE_RESET\n", ioc->name, __func__)); break; } - mpt2sas_scsih_reset_handler(ioc, reset_phase); - mpt2sas_ctl_reset_handler(ioc, reset_phase); } /** @@ -4026,6 +4026,7 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag, { int r; unsigned long flags; + u8 pe_complete = ioc->wait_for_port_enable_to_complete; dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name, __func__)); @@ -4068,6 +4069,14 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag, if (r) goto out; _base_reset_handler(ioc, MPT2_IOC_AFTER_RESET); + + /* If this hard reset is called while port enable is active, then + * there is no reason to call make_ioc_operational + */ + if (pe_complete) { + r = -EFAULT; + goto out; + } r = _base_make_ioc_operational(ioc, sleep_flag); if (!r) _base_reset_handler(ioc, MPT2_IOC_DONE_RESET); -- cgit v1.2.3-18-g5258 From 3a9c913a3e57b170887d39456e04c18f2305ec67 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Tue, 4 Jan 2011 11:40:23 +0530 Subject: [SCSI] mpt2sas: fix Integrated Raid unsynced on shutdown problem Issue: IR shutdown(sending) and IR shutdown(complete) messages not listed in /var/log/messages when driver is removed. The driver needs to issue a MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED request when the driver is unloaded so the IR metadata journal is updated. If this request is not sent, then the volume would need a "check consistency" issued on the next bootup if the volume was roamed from one initiator to another. The current driver supports this feature only when the system is rebooted, however this also need to be supported if the driver is unloaded Fix: To fix this issue, the driver is going to need to call the _scsih_ir_shutdown prior to reporting the volumes missing from the OS, hence the device handles are still present. Signed-off-by: Kashyap Desai Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index db287d79bdc..5ded3db6e31 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -6665,6 +6665,7 @@ _scsih_remove(struct pci_dev *pdev) destroy_workqueue(wq); /* release all the volumes */ + _scsih_ir_shutdown(ioc); list_for_each_entry_safe(raid_device, next, &ioc->raid_device_list, list) { if (raid_device->starget) { -- cgit v1.2.3-18-g5258 From f6a2491ca23d26d829730e33fbdd9e44fc5d1d53 Mon Sep 17 00:00:00 2001 From: Andy Robinson Date: Mon, 24 Jan 2011 10:12:37 -0500 Subject: ALSA: HDA: cxt5066 - Use asus model for Asus U50F, select correct SPDIF output Changed the Asus A52J quirk to use the asus model instead of the hp_laptop model, which fixes the external mic input. Added an Asus U50F quirk to use the asus model. For the cxt5066 codecs, added checking of the digital output pins to determine which digital output nodes to use instead of always using node 0x21, since some systems have node 0x12 connected to a SPDIF out jack. [A slight modification for better readability by tiwai] Signed-off-by: Andy Robinson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_conexant.c | 35 +++++++++++++++++++++++++++++++---- 1 file changed, 31 insertions(+), 4 deletions(-) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 19f0daf6497..9867afc7895 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -85,6 +85,7 @@ struct conexant_spec { unsigned int auto_mic; int auto_mic_ext; /* autocfg.inputs[] index for ext mic */ unsigned int need_dac_fix; + hda_nid_t slave_dig_outs[2]; /* capture */ unsigned int num_adc_nids; @@ -353,6 +354,8 @@ static int conexant_build_pcms(struct hda_codec *codec) info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->dig_in_nid; } + if (spec->slave_dig_outs[0]) + codec->slave_dig_outs = spec->slave_dig_outs; } return 0; @@ -2101,7 +2104,7 @@ static int patch_cxt5051(struct hda_codec *codec) static hda_nid_t cxt5066_dac_nids[1] = { 0x10 }; static hda_nid_t cxt5066_adc_nids[3] = { 0x14, 0x15, 0x16 }; static hda_nid_t cxt5066_capsrc_nids[1] = { 0x17 }; -#define CXT5066_SPDIF_OUT 0x21 +static hda_nid_t cxt5066_digout_pin_nids[2] = { 0x20, 0x22 }; /* OLPC's microphone port is DC coupled for use with external sensors, * therefore we use a 50% mic bias in order to center the input signal with @@ -2623,6 +2626,27 @@ static void cxt5066_olpc_capture_cleanup(struct hda_codec *codec) spec->recording = 0; } +static void conexant_check_dig_outs(struct hda_codec *codec, + hda_nid_t *dig_pins, + int num_pins) +{ + struct conexant_spec *spec = codec->spec; + hda_nid_t *nid_loc = &spec->multiout.dig_out_nid; + int i; + + for (i = 0; i < num_pins; i++, dig_pins++) { + unsigned int cfg = snd_hda_codec_get_pincfg(codec, *dig_pins); + if (get_defcfg_connect(cfg) == AC_JACK_PORT_NONE) + continue; + if (snd_hda_get_connections(codec, *dig_pins, nid_loc, 1) != 1) + continue; + if (spec->slave_dig_outs[0]) + nid_loc++; + else + nid_loc = spec->slave_dig_outs; + } +} + static struct hda_input_mux cxt5066_capture_source = { .num_items = 4, .items = { @@ -3085,8 +3109,9 @@ static struct snd_pci_quirk cxt5066_cfg_tbl[] = { SND_PCI_QUIRK(0x1028, 0x0402, "Dell Vostro", CXT5066_DELL_VOSTRO), SND_PCI_QUIRK(0x1028, 0x0408, "Dell Inspiron One 19T", CXT5066_IDEAPAD), SND_PCI_QUIRK(0x103c, 0x360b, "HP G60", CXT5066_HP_LAPTOP), - SND_PCI_QUIRK(0x1043, 0x13f3, "Asus A52J", CXT5066_HP_LAPTOP), + SND_PCI_QUIRK(0x1043, 0x13f3, "Asus A52J", CXT5066_ASUS), SND_PCI_QUIRK(0x1043, 0x1643, "Asus K52JU", CXT5066_ASUS), + SND_PCI_QUIRK(0x1043, 0x1993, "Asus U50F", CXT5066_ASUS), SND_PCI_QUIRK(0x1179, 0xff1e, "Toshiba Satellite C650D", CXT5066_IDEAPAD), SND_PCI_QUIRK(0x1179, 0xff50, "Toshiba Satellite P500-PSPGSC-01800T", CXT5066_OLPC_XO_1_5), SND_PCI_QUIRK(0x1179, 0xffe0, "Toshiba Satellite Pro T130-15F", CXT5066_OLPC_XO_1_5), @@ -3118,7 +3143,8 @@ static int patch_cxt5066(struct hda_codec *codec) spec->multiout.max_channels = 2; spec->multiout.num_dacs = ARRAY_SIZE(cxt5066_dac_nids); spec->multiout.dac_nids = cxt5066_dac_nids; - spec->multiout.dig_out_nid = CXT5066_SPDIF_OUT; + conexant_check_dig_outs(codec, cxt5066_digout_pin_nids, + ARRAY_SIZE(cxt5066_digout_pin_nids)); spec->num_adc_nids = 1; spec->adc_nids = cxt5066_adc_nids; spec->capsrc_nids = cxt5066_capsrc_nids; @@ -3164,7 +3190,8 @@ static int patch_cxt5066(struct hda_codec *codec) spec->mixers[spec->num_mixers++] = cxt5066_mixer_master; spec->mixers[spec->num_mixers++] = cxt5066_mixers; /* no S/PDIF out */ - spec->multiout.dig_out_nid = 0; + if (board_config == CXT5066_HP_LAPTOP) + spec->multiout.dig_out_nid = 0; /* input source automatically selected */ spec->input_mux = NULL; spec->port_d_mode = 0; -- cgit v1.2.3-18-g5258 From 97b991277a9966333b3bcea0d972822278780694 Mon Sep 17 00:00:00 2001 From: NickCheng Date: Thu, 6 Jan 2011 17:32:41 +0800 Subject: [SCSI] arcmsr: Fix the issue of system hangup after commands timeout on ARC-1200 [jejb: fix up patch problems and checkpatch.pl issues] Signed-off-by: Nick Cheng Signed-off-by: James Bottomley --- drivers/scsi/arcmsr/arcmsr.h | 11 ++-- drivers/scsi/arcmsr/arcmsr_attr.c | 2 +- drivers/scsi/arcmsr/arcmsr_hba.c | 114 ++++++++++++++------------------------ 3 files changed, 49 insertions(+), 78 deletions(-) diff --git a/drivers/scsi/arcmsr/arcmsr.h b/drivers/scsi/arcmsr/arcmsr.h index 475c31ae985..77b26f5b9c3 100644 --- a/drivers/scsi/arcmsr/arcmsr.h +++ b/drivers/scsi/arcmsr/arcmsr.h @@ -2,7 +2,7 @@ ******************************************************************************* ** O.S : Linux ** FILE NAME : arcmsr.h -** BY : Erich Chen +** BY : Nick Cheng ** Description: SCSI RAID Device Driver for ** ARECA RAID Host adapter ******************************************************************************* @@ -46,8 +46,12 @@ struct device_attribute; /*The limit of outstanding scsi command that firmware can handle*/ #define ARCMSR_MAX_OUTSTANDING_CMD 256 -#define ARCMSR_MAX_FREECCB_NUM 320 -#define ARCMSR_DRIVER_VERSION "Driver Version 1.20.00.15 2010/02/02" +#ifdef CONFIG_XEN + #define ARCMSR_MAX_FREECCB_NUM 160 +#else + #define ARCMSR_MAX_FREECCB_NUM 320 +#endif +#define ARCMSR_DRIVER_VERSION "Driver Version 1.20.00.15 2010/08/05" #define ARCMSR_SCSI_INITIATOR_ID 255 #define ARCMSR_MAX_XFER_SECTORS 512 #define ARCMSR_MAX_XFER_SECTORS_B 4096 @@ -60,7 +64,6 @@ struct device_attribute; #define ARCMSR_MAX_HBB_POSTQUEUE 264 #define ARCMSR_MAX_XFER_LEN 0x26000 /* 152K */ #define ARCMSR_CDB_SG_PAGE_LENGTH 256 -#define SCSI_CMD_ARECA_SPECIFIC 0xE1 #ifndef PCI_DEVICE_ID_ARECA_1880 #define PCI_DEVICE_ID_ARECA_1880 0x1880 #endif diff --git a/drivers/scsi/arcmsr/arcmsr_attr.c b/drivers/scsi/arcmsr/arcmsr_attr.c index a4e04c50c43..acdae33de52 100644 --- a/drivers/scsi/arcmsr/arcmsr_attr.c +++ b/drivers/scsi/arcmsr/arcmsr_attr.c @@ -2,7 +2,7 @@ ******************************************************************************* ** O.S : Linux ** FILE NAME : arcmsr_attr.c -** BY : Erich Chen +** BY : Nick Cheng ** Description: attributes exported to sysfs and device host ******************************************************************************* ** Copyright (C) 2002 - 2005, Areca Technology Corporation All rights reserved diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c index 1cadcd6b7da..984bd527c6c 100644 --- a/drivers/scsi/arcmsr/arcmsr_hba.c +++ b/drivers/scsi/arcmsr/arcmsr_hba.c @@ -2,7 +2,7 @@ ******************************************************************************* ** O.S : Linux ** FILE NAME : arcmsr_hba.c -** BY : Erich Chen +** BY : Nick Cheng ** Description: SCSI RAID Device Driver for ** ARECA RAID Host adapter ******************************************************************************* @@ -76,7 +76,7 @@ MODULE_DESCRIPTION("ARECA (ARC11xx/12xx/16xx/1880) SATA/SAS RAID Host Bus Adapte MODULE_LICENSE("Dual BSD/GPL"); MODULE_VERSION(ARCMSR_DRIVER_VERSION); static int sleeptime = 10; -static int retrycount = 30; +static int retrycount = 12; wait_queue_head_t wait_q; static int arcmsr_iop_message_xfer(struct AdapterControlBlock *acb, struct scsi_cmnd *cmd); @@ -187,7 +187,6 @@ int arcmsr_sleep_for_bus_reset(struct scsi_cmnd *cmd) if (isleep > 0) { msleep(isleep*1000); } - printk(KERN_NOTICE "wake-up\n"); return 0; } @@ -921,7 +920,6 @@ static void arcmsr_report_ccb_state(struct AdapterControlBlock *acb, } static void arcmsr_drain_donequeue(struct AdapterControlBlock *acb, struct CommandControlBlock *pCCB, bool error) - { int id, lun; if ((pCCB->acb != acb) || (pCCB->startdone != ARCMSR_CCB_START)) { @@ -948,7 +946,7 @@ static void arcmsr_drain_donequeue(struct AdapterControlBlock *acb, struct Comma , pCCB->startdone , atomic_read(&acb->ccboutstandingcount)); return; - } + } arcmsr_report_ccb_state(acb, pCCB, error); } @@ -981,7 +979,7 @@ static void arcmsr_done4abort_postqueue(struct AdapterControlBlock *acb) case ACB_ADAPTER_TYPE_B: { struct MessageUnit_B *reg = acb->pmuB; /*clear all outbound posted Q*/ - writel(ARCMSR_DOORBELL_INT_CLEAR_PATTERN, ®->iop2drv_doorbell); /* clear doorbell interrupt */ + writel(ARCMSR_DOORBELL_INT_CLEAR_PATTERN, reg->iop2drv_doorbell); /* clear doorbell interrupt */ for (i = 0; i < ARCMSR_MAX_HBB_POSTQUEUE; i++) { if ((flag_ccb = readl(®->done_qbuffer[i])) != 0) { writel(0, ®->done_qbuffer[i]); @@ -1511,7 +1509,6 @@ static void arcmsr_hba_postqueue_isr(struct AdapterControlBlock *acb) arcmsr_drain_donequeue(acb, pCCB, error); } } - static void arcmsr_hbb_postqueue_isr(struct AdapterControlBlock *acb) { uint32_t index; @@ -2106,10 +2103,6 @@ static int arcmsr_queue_command_lck(struct scsi_cmnd *cmd, if (atomic_read(&acb->ccboutstandingcount) >= ARCMSR_MAX_OUTSTANDING_CMD) return SCSI_MLQUEUE_HOST_BUSY; - if ((scsicmd == SCSI_CMD_ARECA_SPECIFIC)) { - printk(KERN_NOTICE "Receiveing SCSI_CMD_ARECA_SPECIFIC command..\n"); - return 0; - } ccb = arcmsr_get_freeccb(acb); if (!ccb) return SCSI_MLQUEUE_HOST_BUSY; @@ -2393,6 +2386,7 @@ static int arcmsr_polling_hbb_ccbdone(struct AdapterControlBlock *acb, int index, rtn; bool error; polling_hbb_ccb_retry: + poll_count++; /* clear doorbell interrupt */ writel(ARCMSR_DOORBELL_INT_CLEAR_PATTERN, reg->iop2drv_doorbell); @@ -2663,6 +2657,7 @@ static void arcmsr_request_hba_device_map(struct AdapterControlBlock *acb) { struct MessageUnit_A __iomem *reg = acb->pmuA; if (unlikely(atomic_read(&acb->rq_map_token) == 0) || ((acb->acb_flags & ACB_F_BUS_RESET) != 0 ) || ((acb->acb_flags & ACB_F_ABORT) != 0 )){ + mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ)); return; } else { acb->fw_flag = FW_NORMAL; @@ -2670,8 +2665,10 @@ static void arcmsr_request_hba_device_map(struct AdapterControlBlock *acb) atomic_set(&acb->rq_map_token, 16); } atomic_set(&acb->ante_token_value, atomic_read(&acb->rq_map_token)); - if (atomic_dec_and_test(&acb->rq_map_token)) + if (atomic_dec_and_test(&acb->rq_map_token)) { + mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ)); return; + } writel(ARCMSR_INBOUND_MESG0_GET_CONFIG, ®->inbound_msgaddr0); mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ)); } @@ -2682,15 +2679,18 @@ static void arcmsr_request_hbb_device_map(struct AdapterControlBlock *acb) { struct MessageUnit_B __iomem *reg = acb->pmuB; if (unlikely(atomic_read(&acb->rq_map_token) == 0) || ((acb->acb_flags & ACB_F_BUS_RESET) != 0 ) || ((acb->acb_flags & ACB_F_ABORT) != 0 )){ + mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ)); return; } else { acb->fw_flag = FW_NORMAL; if (atomic_read(&acb->ante_token_value) == atomic_read(&acb->rq_map_token)) { - atomic_set(&acb->rq_map_token,16); + atomic_set(&acb->rq_map_token, 16); } atomic_set(&acb->ante_token_value, atomic_read(&acb->rq_map_token)); - if(atomic_dec_and_test(&acb->rq_map_token)) + if (atomic_dec_and_test(&acb->rq_map_token)) { + mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ)); return; + } writel(ARCMSR_MESSAGE_GET_CONFIG, reg->drv2iop_doorbell); mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ)); } @@ -2701,6 +2701,7 @@ static void arcmsr_request_hbc_device_map(struct AdapterControlBlock *acb) { struct MessageUnit_C __iomem *reg = acb->pmuC; if (unlikely(atomic_read(&acb->rq_map_token) == 0) || ((acb->acb_flags & ACB_F_BUS_RESET) != 0) || ((acb->acb_flags & ACB_F_ABORT) != 0)) { + mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ)); return; } else { acb->fw_flag = FW_NORMAL; @@ -2708,8 +2709,10 @@ static void arcmsr_request_hbc_device_map(struct AdapterControlBlock *acb) atomic_set(&acb->rq_map_token, 16); } atomic_set(&acb->ante_token_value, atomic_read(&acb->rq_map_token)); - if (atomic_dec_and_test(&acb->rq_map_token)) + if (atomic_dec_and_test(&acb->rq_map_token)) { + mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ)); return; + } writel(ARCMSR_INBOUND_MESG0_GET_CONFIG, ®->inbound_msgaddr0); writel(ARCMSR_HBCMU_DRV2IOP_MESSAGE_CMD_DONE, ®->inbound_doorbell); mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ)); @@ -2897,6 +2900,8 @@ static uint8_t arcmsr_iop_reset(struct AdapterControlBlock *acb) uint32_t intmask_org; uint8_t rtnval = 0x00; int i = 0; + unsigned long flags; + if (atomic_read(&acb->ccboutstandingcount) != 0) { /* disable all outbound interrupt */ intmask_org = arcmsr_disable_outbound_ints(acb); @@ -2907,7 +2912,12 @@ static uint8_t arcmsr_iop_reset(struct AdapterControlBlock *acb) for (i = 0; i < ARCMSR_MAX_FREECCB_NUM; i++) { ccb = acb->pccb_pool[i]; if (ccb->startdone == ARCMSR_CCB_START) { - arcmsr_ccb_complete(ccb); + scsi_dma_unmap(ccb->pcmd); + ccb->startdone = ARCMSR_CCB_DONE; + ccb->ccb_flags = 0; + spin_lock_irqsave(&acb->ccblist_lock, flags); + list_add_tail(&ccb->list, &acb->ccb_free_list); + spin_unlock_irqrestore(&acb->ccblist_lock, flags); } } atomic_set(&acb->ccboutstandingcount, 0); @@ -2920,8 +2930,7 @@ static uint8_t arcmsr_iop_reset(struct AdapterControlBlock *acb) static int arcmsr_bus_reset(struct scsi_cmnd *cmd) { - struct AdapterControlBlock *acb = - (struct AdapterControlBlock *)cmd->device->host->hostdata; + struct AdapterControlBlock *acb; uint32_t intmask_org, outbound_doorbell; int retry_count = 0; int rtn = FAILED; @@ -2971,31 +2980,16 @@ sleep_again: atomic_set(&acb->rq_map_token, 16); atomic_set(&acb->ante_token_value, 16); acb->fw_flag = FW_NORMAL; - init_timer(&acb->eternal_timer); - acb->eternal_timer.expires = jiffies + msecs_to_jiffies(6*HZ); - acb->eternal_timer.data = (unsigned long) acb; - acb->eternal_timer.function = &arcmsr_request_device_map; - add_timer(&acb->eternal_timer); + mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ)); acb->acb_flags &= ~ACB_F_BUS_RESET; rtn = SUCCESS; printk(KERN_ERR "arcmsr: scsi bus reset eh returns with success\n"); } else { acb->acb_flags &= ~ACB_F_BUS_RESET; - if (atomic_read(&acb->rq_map_token) == 0) { - atomic_set(&acb->rq_map_token, 16); - atomic_set(&acb->ante_token_value, 16); - acb->fw_flag = FW_NORMAL; - init_timer(&acb->eternal_timer); - acb->eternal_timer.expires = jiffies + msecs_to_jiffies(6*HZ); - acb->eternal_timer.data = (unsigned long) acb; - acb->eternal_timer.function = &arcmsr_request_device_map; - add_timer(&acb->eternal_timer); - } else { - atomic_set(&acb->rq_map_token, 16); - atomic_set(&acb->ante_token_value, 16); - acb->fw_flag = FW_NORMAL; - mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6*HZ)); - } + atomic_set(&acb->rq_map_token, 16); + atomic_set(&acb->ante_token_value, 16); + acb->fw_flag = FW_NORMAL; + mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6*HZ)); rtn = SUCCESS; } break; @@ -3007,21 +3001,10 @@ sleep_again: rtn = FAILED; } else { acb->acb_flags &= ~ACB_F_BUS_RESET; - if (atomic_read(&acb->rq_map_token) == 0) { - atomic_set(&acb->rq_map_token, 16); - atomic_set(&acb->ante_token_value, 16); - acb->fw_flag = FW_NORMAL; - init_timer(&acb->eternal_timer); - acb->eternal_timer.expires = jiffies + msecs_to_jiffies(6*HZ); - acb->eternal_timer.data = (unsigned long) acb; - acb->eternal_timer.function = &arcmsr_request_device_map; - add_timer(&acb->eternal_timer); - } else { - atomic_set(&acb->rq_map_token, 16); - atomic_set(&acb->ante_token_value, 16); - acb->fw_flag = FW_NORMAL; - mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6*HZ)); - } + atomic_set(&acb->rq_map_token, 16); + atomic_set(&acb->ante_token_value, 16); + acb->fw_flag = FW_NORMAL; + mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ)); rtn = SUCCESS; } break; @@ -3067,31 +3050,16 @@ sleep: atomic_set(&acb->rq_map_token, 16); atomic_set(&acb->ante_token_value, 16); acb->fw_flag = FW_NORMAL; - init_timer(&acb->eternal_timer); - acb->eternal_timer.expires = jiffies + msecs_to_jiffies(6 * HZ); - acb->eternal_timer.data = (unsigned long) acb; - acb->eternal_timer.function = &arcmsr_request_device_map; - add_timer(&acb->eternal_timer); + mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ)); acb->acb_flags &= ~ACB_F_BUS_RESET; rtn = SUCCESS; printk(KERN_ERR "arcmsr: scsi bus reset eh returns with success\n"); } else { acb->acb_flags &= ~ACB_F_BUS_RESET; - if (atomic_read(&acb->rq_map_token) == 0) { - atomic_set(&acb->rq_map_token, 16); - atomic_set(&acb->ante_token_value, 16); - acb->fw_flag = FW_NORMAL; - init_timer(&acb->eternal_timer); - acb->eternal_timer.expires = jiffies + msecs_to_jiffies(6*HZ); - acb->eternal_timer.data = (unsigned long) acb; - acb->eternal_timer.function = &arcmsr_request_device_map; - add_timer(&acb->eternal_timer); - } else { - atomic_set(&acb->rq_map_token, 16); - atomic_set(&acb->ante_token_value, 16); - acb->fw_flag = FW_NORMAL; - mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6*HZ)); - } + atomic_set(&acb->rq_map_token, 16); + atomic_set(&acb->ante_token_value, 16); + acb->fw_flag = FW_NORMAL; + mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6*HZ)); rtn = SUCCESS; } break; -- cgit v1.2.3-18-g5258 From ac61c46f4f7665ab4548e90430c37b2529e16cff Mon Sep 17 00:00:00 2001 From: David Dillow Date: Sun, 16 Jan 2011 15:12:39 -0500 Subject: [SCSI] fix incorrect value of SCSI_MAX_SG_CHAIN_SEGMENTS due to include file ordering If the compiled object doesn't include linux/scatterlist.h before scsi/scsi.h, it will get an incorrect definition of SCSI_MAX_SG_CHAIN_SEGMENTS. Signed-off-by: David Dillow Cc: stable@kernel.org Signed-off-by: James Bottomley --- include/scsi/scsi.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h index 648d2335803..b76d4006e36 100644 --- a/include/scsi/scsi.h +++ b/include/scsi/scsi.h @@ -9,6 +9,7 @@ #define _SCSI_SCSI_H #include +#include struct scsi_cmnd; -- cgit v1.2.3-18-g5258 From 9ee91f7fb550a4c82f82d9818e42493484c754af Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Thu, 20 Jan 2011 17:26:44 -0600 Subject: [SCSI] libsas: fix runaway error handler problem libsas makes use of scsi_schedule_eh() but forgets to clear the host_eh_scheduled flag in its error handling routine. Because of this, the error handler thread never gets to sleep; it's constantly awake and trying to run the error routine leading to console spew and inability to run anything else (at least on a UP system). The fix is to clear the flag as we splice the work queue. Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_scsi_host.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index 5815cbeb27a..9a7aaf5f131 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -646,6 +646,7 @@ void sas_scsi_recover_host(struct Scsi_Host *shost) spin_lock_irqsave(shost->host_lock, flags); list_splice_init(&shost->eh_cmd_q, &eh_work_q); + shost->host_eh_scheduled = 0; spin_unlock_irqrestore(shost->host_lock, flags); SAS_DPRINTK("Enter %s\n", __func__); -- cgit v1.2.3-18-g5258 From c71caf4114a0e1da3451cc92fba6a152929cd4c2 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Mon, 24 Jan 2011 19:01:07 +0100 Subject: netfilter: ctnetlink: fix missing refcount increment during dumps In 13ee6ac netfilter: fix race in conntrack between dump_table and destroy, we recovered spinlocks to protect the dump of the conntrack table according to reports from Stephen and acknowledgments on the issue from Eric. In that patch, the refcount bump that allows to keep a reference to the current ct object was removed. However, we still decrement the refcount for that object in the output path of ctnetlink_dump_table(): if (last) nf_ct_put(last) Cc: Stephen Hemminger Signed-off-by: Pablo Neira Ayuso Acked-by: Eric Dumazet Signed-off-by: Patrick McHardy --- net/netfilter/nf_conntrack_netlink.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index 93297aaceb2..eead9db6f89 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -667,6 +667,7 @@ restart: if (ctnetlink_fill_info(skb, NETLINK_CB(cb->skb).pid, cb->nlh->nlmsg_seq, IPCTNL_MSG_CT_NEW, ct) < 0) { + nf_conntrack_get(&ct->ct_general); cb->args[1] = (unsigned long)ct; goto out; } -- cgit v1.2.3-18-g5258 From 08b5194b5d6485d12ebf24cf6ee389fc55691122 Mon Sep 17 00:00:00 2001 From: Thomas Jacob Date: Mon, 24 Jan 2011 21:35:36 +0100 Subject: netfilter: xt_iprange: Incorrect xt_iprange boundary check for IPv6 iprange_ipv6_sub was substracting 2 unsigned ints and then casting the result to int to find out whether they are lt, eq or gt each other, this doesn't work if the full 32 bits of each part can be used in IPv6 addresses. Patch should remedy that without significant performance penalties. Also number of ntohl calls can be reduced this way (Jozsef Kadlecsik). Signed-off-by: Thomas Jacob Signed-off-by: Patrick McHardy --- net/netfilter/xt_iprange.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/net/netfilter/xt_iprange.c b/net/netfilter/xt_iprange.c index 88f7c3511c7..73c33a42f87 100644 --- a/net/netfilter/xt_iprange.c +++ b/net/netfilter/xt_iprange.c @@ -53,15 +53,13 @@ iprange_mt4(const struct sk_buff *skb, struct xt_action_param *par) } static inline int -iprange_ipv6_sub(const struct in6_addr *a, const struct in6_addr *b) +iprange_ipv6_lt(const struct in6_addr *a, const struct in6_addr *b) { unsigned int i; - int r; for (i = 0; i < 4; ++i) { - r = ntohl(a->s6_addr32[i]) - ntohl(b->s6_addr32[i]); - if (r != 0) - return r; + if (a->s6_addr32[i] != b->s6_addr32[i]) + return ntohl(a->s6_addr32[i]) < ntohl(b->s6_addr32[i]); } return 0; @@ -75,15 +73,15 @@ iprange_mt6(const struct sk_buff *skb, struct xt_action_param *par) bool m; if (info->flags & IPRANGE_SRC) { - m = iprange_ipv6_sub(&iph->saddr, &info->src_min.in6) < 0; - m |= iprange_ipv6_sub(&iph->saddr, &info->src_max.in6) > 0; + m = iprange_ipv6_lt(&iph->saddr, &info->src_min.in6); + m |= iprange_ipv6_lt(&info->src_max.in6, &iph->saddr); m ^= !!(info->flags & IPRANGE_SRC_INV); if (m) return false; } if (info->flags & IPRANGE_DST) { - m = iprange_ipv6_sub(&iph->daddr, &info->dst_min.in6) < 0; - m |= iprange_ipv6_sub(&iph->daddr, &info->dst_max.in6) > 0; + m = iprange_ipv6_lt(&iph->daddr, &info->dst_min.in6); + m |= iprange_ipv6_lt(&info->dst_max.in6, &iph->daddr); m ^= !!(info->flags & IPRANGE_DST_INV); if (m) return false; -- cgit v1.2.3-18-g5258 From 6b28405395f7ec492ea69f541cc774adcb9e00ca Mon Sep 17 00:00:00 2001 From: Axel Köllhofer Date: Sat, 22 Jan 2011 14:33:50 -0600 Subject: staging: r8712u: Add new device IDs This patch adds several new device ids to the r8712u staging driver. The new ids were retrieved from latest vendor driver (v2.6.6.0.20101111) downloadable from www.realtek.com.tw Signed-off-by: Axel Koellhofer Signed-off-by: Larry Finger Cc: Stable [2.6.37] Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8712/usb_intf.c | 145 +++++++++++++++++++++++++++++-------- 1 file changed, 113 insertions(+), 32 deletions(-) diff --git a/drivers/staging/rtl8712/usb_intf.c b/drivers/staging/rtl8712/usb_intf.c index a692ee88b9e..21ce2af447b 100644 --- a/drivers/staging/rtl8712/usb_intf.c +++ b/drivers/staging/rtl8712/usb_intf.c @@ -47,54 +47,123 @@ static int r871xu_drv_init(struct usb_interface *pusb_intf, static void r871xu_dev_remove(struct usb_interface *pusb_intf); static struct usb_device_id rtl871x_usb_id_tbl[] = { - /*92SU - * Realtek */ - {USB_DEVICE(0x0bda, 0x8171)}, - {USB_DEVICE(0x0bda, 0x8172)}, + +/* RTL8188SU */ + /* Realtek */ + {USB_DEVICE(0x0BDA, 0x8171)}, {USB_DEVICE(0x0bda, 0x8173)}, - {USB_DEVICE(0x0bda, 0x8174)}, {USB_DEVICE(0x0bda, 0x8712)}, {USB_DEVICE(0x0bda, 0x8713)}, {USB_DEVICE(0x0bda, 0xC512)}, - /* Abocom */ + /* Abocom */ {USB_DEVICE(0x07B8, 0x8188)}, + /* ASUS */ + {USB_DEVICE(0x0B05, 0x1786)}, + {USB_DEVICE(0x0B05, 0x1791)}, /* 11n mode disable */ + /* Belkin */ + {USB_DEVICE(0x050D, 0x945A)}, /* Corega */ - {USB_DEVICE(0x07aa, 0x0047)}, - /* Dlink */ - {USB_DEVICE(0x07d1, 0x3303)}, - {USB_DEVICE(0x07d1, 0x3302)}, - {USB_DEVICE(0x07d1, 0x3300)}, - /* Dlink for Skyworth */ - {USB_DEVICE(0x14b2, 0x3300)}, - {USB_DEVICE(0x14b2, 0x3301)}, - {USB_DEVICE(0x14b2, 0x3302)}, + {USB_DEVICE(0x07AA, 0x0047)}, + /* D-Link */ + {USB_DEVICE(0x2001, 0x3306)}, + {USB_DEVICE(0x07D1, 0x3306)}, /* 11n mode disable */ + /* Edimax */ + {USB_DEVICE(0x7392, 0x7611)}, /* EnGenius */ {USB_DEVICE(0x1740, 0x9603)}, - {USB_DEVICE(0x1740, 0x9605)}, + /* Hawking */ + {USB_DEVICE(0x0E66, 0x0016)}, + /* Hercules */ + {USB_DEVICE(0x06F8, 0xE034)}, + {USB_DEVICE(0x06F8, 0xE032)}, + /* Logitec */ + {USB_DEVICE(0x0789, 0x0167)}, + /* PCI */ + {USB_DEVICE(0x2019, 0xAB28)}, + {USB_DEVICE(0x2019, 0xED16)}, + /* Sitecom */ + {USB_DEVICE(0x0DF6, 0x0057)}, + {USB_DEVICE(0x0DF6, 0x0045)}, + {USB_DEVICE(0x0DF6, 0x0059)}, /* 11n mode disable */ + {USB_DEVICE(0x0DF6, 0x004B)}, + {USB_DEVICE(0x0DF6, 0x0063)}, + /* Sweex */ + {USB_DEVICE(0x177F, 0x0154)}, + /* Thinkware */ + {USB_DEVICE(0x0BDA, 0x5077)}, + /* Toshiba */ + {USB_DEVICE(0x1690, 0x0752)}, + /* - */ + {USB_DEVICE(0x20F4, 0x646B)}, + {USB_DEVICE(0x083A, 0xC512)}, + +/* RTL8191SU */ + /* Realtek */ + {USB_DEVICE(0x0BDA, 0x8172)}, + /* Amigo */ + {USB_DEVICE(0x0EB0, 0x9061)}, + /* ASUS/EKB */ + {USB_DEVICE(0x0BDA, 0x8172)}, + {USB_DEVICE(0x13D3, 0x3323)}, + {USB_DEVICE(0x13D3, 0x3311)}, /* 11n mode disable */ + {USB_DEVICE(0x13D3, 0x3342)}, + /* ASUS/EKBLenovo */ + {USB_DEVICE(0x13D3, 0x3333)}, + {USB_DEVICE(0x13D3, 0x3334)}, + {USB_DEVICE(0x13D3, 0x3335)}, /* 11n mode disable */ + {USB_DEVICE(0x13D3, 0x3336)}, /* 11n mode disable */ + /* ASUS/Media BOX */ + {USB_DEVICE(0x13D3, 0x3309)}, /* Belkin */ - {USB_DEVICE(0x050d, 0x815F)}, - {USB_DEVICE(0x050d, 0x945A)}, - {USB_DEVICE(0x050d, 0x845A)}, - /* Guillemot */ - {USB_DEVICE(0x06f8, 0xe031)}, + {USB_DEVICE(0x050D, 0x815F)}, + /* D-Link */ + {USB_DEVICE(0x07D1, 0x3302)}, + {USB_DEVICE(0x07D1, 0x3300)}, + {USB_DEVICE(0x07D1, 0x3303)}, /* Edimax */ - {USB_DEVICE(0x7392, 0x7611)}, {USB_DEVICE(0x7392, 0x7612)}, - {USB_DEVICE(0x7392, 0x7622)}, - /* Sitecom */ - {USB_DEVICE(0x0DF6, 0x0045)}, + /* EnGenius */ + {USB_DEVICE(0x1740, 0x9605)}, + /* Guillemot */ + {USB_DEVICE(0x06F8, 0xE031)}, /* Hawking */ {USB_DEVICE(0x0E66, 0x0015)}, - {USB_DEVICE(0x0E66, 0x0016)}, - {USB_DEVICE(0x0b05, 0x1786)}, - {USB_DEVICE(0x0b05, 0x1791)}, /* 11n mode disable */ - + /* Mediao */ {USB_DEVICE(0x13D3, 0x3306)}, - {USB_DEVICE(0x13D3, 0x3309)}, + /* PCI */ + {USB_DEVICE(0x2019, 0xED18)}, + {USB_DEVICE(0x2019, 0x4901)}, + /* Sitecom */ + {USB_DEVICE(0x0DF6, 0x0058)}, + {USB_DEVICE(0x0DF6, 0x0049)}, + {USB_DEVICE(0x0DF6, 0x004C)}, + {USB_DEVICE(0x0DF6, 0x0064)}, + /* Skyworth */ + {USB_DEVICE(0x14b2, 0x3300)}, + {USB_DEVICE(0x14b2, 0x3301)}, + {USB_DEVICE(0x14B2, 0x3302)}, + /* - */ + {USB_DEVICE(0x04F2, 0xAFF2)}, + {USB_DEVICE(0x04F2, 0xAFF5)}, + {USB_DEVICE(0x04F2, 0xAFF6)}, + {USB_DEVICE(0x13D3, 0x3339)}, + {USB_DEVICE(0x13D3, 0x3340)}, /* 11n mode disable */ + {USB_DEVICE(0x13D3, 0x3341)}, /* 11n mode disable */ {USB_DEVICE(0x13D3, 0x3310)}, - {USB_DEVICE(0x13D3, 0x3311)}, /* 11n mode disable */ {USB_DEVICE(0x13D3, 0x3325)}, - {USB_DEVICE(0x083A, 0xC512)}, + +/* RTL8192SU */ + /* Realtek */ + {USB_DEVICE(0x0BDA, 0x8174)}, + {USB_DEVICE(0x0BDA, 0x8174)}, + /* Belkin */ + {USB_DEVICE(0x050D, 0x845A)}, + /* Corega */ + {USB_DEVICE(0x07AA, 0x0051)}, + /* Edimax */ + {USB_DEVICE(0x7392, 0x7622)}, + /* NEC */ + {USB_DEVICE(0x0409, 0x02B6)}, {} }; @@ -103,8 +172,20 @@ MODULE_DEVICE_TABLE(usb, rtl871x_usb_id_tbl); static struct specific_device_id specific_device_id_tbl[] = { {.idVendor = 0x0b05, .idProduct = 0x1791, .flags = SPEC_DEV_ID_DISABLE_HT}, + {.idVendor = 0x0df6, .idProduct = 0x0059, + .flags = SPEC_DEV_ID_DISABLE_HT}, + {.idVendor = 0x13d3, .idProduct = 0x3306, + .flags = SPEC_DEV_ID_DISABLE_HT}, {.idVendor = 0x13D3, .idProduct = 0x3311, .flags = SPEC_DEV_ID_DISABLE_HT}, + {.idVendor = 0x13d3, .idProduct = 0x3335, + .flags = SPEC_DEV_ID_DISABLE_HT}, + {.idVendor = 0x13d3, .idProduct = 0x3336, + .flags = SPEC_DEV_ID_DISABLE_HT}, + {.idVendor = 0x13d3, .idProduct = 0x3340, + .flags = SPEC_DEV_ID_DISABLE_HT}, + {.idVendor = 0x13d3, .idProduct = 0x3341, + .flags = SPEC_DEV_ID_DISABLE_HT}, {} }; -- cgit v1.2.3-18-g5258 From c506653d35249bb4738bb139c24362e1ae724bc1 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 24 Jan 2011 13:16:16 -0800 Subject: net: arp_ioctl() must hold RTNL Commit 941666c2e3e0 "net: RCU conversion of dev_getbyhwaddr() and arp_ioctl()" introduced a regression, reported by Jamie Heilman. "arp -Ds 192.168.2.41 eth0 pub" triggered the ASSERT_RTNL() assert in pneigh_lookup() Removing RTNL requirement from arp_ioctl() was a mistake, just revert that part. Reported-by: Jamie Heilman Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/core/dev.c | 3 ++- net/ipv4/arp.c | 11 +++++------ 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index 8393ec408cd..1e5077d2cca 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -749,7 +749,8 @@ EXPORT_SYMBOL(dev_get_by_index); * @ha: hardware address * * Search for an interface by MAC address. Returns NULL if the device - * is not found or a pointer to the device. The caller must hold RCU + * is not found or a pointer to the device. + * The caller must hold RCU or RTNL. * The returned device has not had its ref count increased * and the caller must therefore be careful about locking * diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c index 04c8b69fd42..7927589813b 100644 --- a/net/ipv4/arp.c +++ b/net/ipv4/arp.c @@ -1017,14 +1017,13 @@ static int arp_req_set_proxy(struct net *net, struct net_device *dev, int on) IPV4_DEVCONF_ALL(net, PROXY_ARP) = on; return 0; } - if (__in_dev_get_rcu(dev)) { - IN_DEV_CONF_SET(__in_dev_get_rcu(dev), PROXY_ARP, on); + if (__in_dev_get_rtnl(dev)) { + IN_DEV_CONF_SET(__in_dev_get_rtnl(dev), PROXY_ARP, on); return 0; } return -ENXIO; } -/* must be called with rcu_read_lock() */ static int arp_req_set_public(struct net *net, struct arpreq *r, struct net_device *dev) { @@ -1233,10 +1232,10 @@ int arp_ioctl(struct net *net, unsigned int cmd, void __user *arg) if (!(r.arp_flags & ATF_NETMASK)) ((struct sockaddr_in *)&r.arp_netmask)->sin_addr.s_addr = htonl(0xFFFFFFFFUL); - rcu_read_lock(); + rtnl_lock(); if (r.arp_dev[0]) { err = -ENODEV; - dev = dev_get_by_name_rcu(net, r.arp_dev); + dev = __dev_get_by_name(net, r.arp_dev); if (dev == NULL) goto out; @@ -1263,7 +1262,7 @@ int arp_ioctl(struct net *net, unsigned int cmd, void __user *arg) break; } out: - rcu_read_unlock(); + rtnl_unlock(); if (cmd == SIOCGARP && !err && copy_to_user(arg, &r, sizeof(r))) err = -EFAULT; return err; -- cgit v1.2.3-18-g5258 From 2e5aa6824d9e0248d734573dad8858a2cc279cfe Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Mon, 24 Jan 2011 22:41:11 +0100 Subject: x86-64: Don't use pointer to out-of-scope variable in dump_trace() In arch/x86/kernel/dumpstack_64.c::dump_trace() we have this code: ... if (!stack) { unsigned long dummy; stack = &dummy; if (task && task != current) stack = (unsigned long *)task->thread.sp; } bp = stack_frame(task, regs); /* * Print function call entries in all stacks, starting at the * current stack address. If the stacks consist of nested * exceptions */ tinfo = task_thread_info(task); for (;;) { char *id; unsigned long *estack_end; estack_end = in_exception_stack(cpu, (unsigned long)stack, &used, &id); ... You'll notice that we assign to 'stack' the address of the variable 'dummy' which is only in-scope inside the 'if (!stack)'. So when we later access stack (at the end of the above, and assuming we did not take the 'if (task && task != current)' branch) we'll be using the address of a variable that is no longer in scope. I believe this patch is the proper fix, but I freely admit that I'm not 100% certain. Signed-off-by: Jesper Juhl LKML-Reference: Signed-off-by: H. Peter Anvin --- arch/x86/kernel/dumpstack_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c index 64101335de1..a6b6fcf7f0a 100644 --- a/arch/x86/kernel/dumpstack_64.c +++ b/arch/x86/kernel/dumpstack_64.c @@ -149,13 +149,13 @@ void dump_trace(struct task_struct *task, unsigned used = 0; struct thread_info *tinfo; int graph = 0; + unsigned long dummy; unsigned long bp; if (!task) task = current; if (!stack) { - unsigned long dummy; stack = &dummy; if (task && task != current) stack = (unsigned long *)task->thread.sp; -- cgit v1.2.3-18-g5258 From d1dc7abf2fafa34b0ffcd070fd59405aa9c0a4d8 Mon Sep 17 00:00:00 2001 From: Michal Schmidt Date: Mon, 24 Jan 2011 12:08:48 +0000 Subject: GRO: fix merging a paged skb after non-paged skbs Suppose that several linear skbs of the same flow were received by GRO. They were thus merged into one skb with a frag_list. Then a new skb of the same flow arrives, but it is a paged skb with data starting in its frags[]. Before adding the skb to the frag_list skb_gro_receive() will of course adjust the skb to throw away the headers. It correctly modifies the page_offset and size of the frag, but it leaves incorrect information in the skb: ->data_len is not decreased at all. ->len is decreased only by headlen, as if no change were done to the frag. Later in a receiving process this causes skb_copy_datagram_iovec() to return -EFAULT and this is seen in userspace as the result of the recv() syscall. In practice the bug can be reproduced with the sfc driver. By default the driver uses an adaptive scheme when it switches between using napi_gro_receive() (with skbs) and napi_gro_frags() (with pages). The bug is reproduced when under rx load with enough successful GRO merging the driver decides to switch from the former to the latter. Manual control is also possible, so reproducing this is easy with netcat: - on machine1 (with sfc): nc -l 12345 > /dev/null - on machine2: nc machine1 12345 < /dev/zero - on machine1: echo 1 > /sys/module/sfc/parameters/rx_alloc_method # use skbs echo 2 > /sys/module/sfc/parameters/rx_alloc_method # use pages - See that nc has quit suddenly. [v2: Modified by Eric Dumazet to avoid advancing skb->data past the end and to use a temporary variable.] Signed-off-by: Michal Schmidt Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/core/skbuff.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index d31bb36ae0d..7cd1bc86d59 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -2744,8 +2744,12 @@ int skb_gro_receive(struct sk_buff **head, struct sk_buff *skb) merge: if (offset > headlen) { - skbinfo->frags[0].page_offset += offset - headlen; - skbinfo->frags[0].size -= offset - headlen; + unsigned int eat = offset - headlen; + + skbinfo->frags[0].page_offset += eat; + skbinfo->frags[0].size -= eat; + skb->data_len -= eat; + skb->len -= eat; offset = headlen; } -- cgit v1.2.3-18-g5258 From 3408404a4c2a4eead9d73b0bbbfe3f225b65f492 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 24 Jan 2011 14:37:46 -0800 Subject: inetpeer: Use correct AVL tree base pointer in inet_getpeer(). Family was hard-coded to AF_INET but should be daddr->family. This fixes crashes when unlinking ipv6 peer entries, since the unlink code was looking up the base pointer properly. Reported-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/inetpeer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/inetpeer.c b/net/ipv4/inetpeer.c index d9bc85751c7..a96e65674ac 100644 --- a/net/ipv4/inetpeer.c +++ b/net/ipv4/inetpeer.c @@ -475,7 +475,7 @@ static int cleanup_once(unsigned long ttl) struct inet_peer *inet_getpeer(struct inetpeer_addr *daddr, int create) { struct inet_peer __rcu **stack[PEER_MAXDEPTH], ***stackptr; - struct inet_peer_base *base = family_to_base(AF_INET); + struct inet_peer_base *base = family_to_base(daddr->family); struct inet_peer *p; /* Look up for the address quickly, lockless. -- cgit v1.2.3-18-g5258 From fd0273c5033630b8673554cd39660435d1ab2ac4 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 24 Jan 2011 14:41:20 -0800 Subject: tcp: fix bug in listening_get_next() commit a8b690f98baf9fb19 (tcp: Fix slowness in read /proc/net/tcp) introduced a bug in handling of SYN_RECV sockets. st->offset represents number of sockets found since beginning of listening_hash[st->bucket]. We should not reset st->offset when iterating through syn_table[st->sbucket], or else if more than ~25 sockets (if PAGE_SIZE=4096) are in SYN_RECV state, we exit from listening_get_next() with a too small st->offset Next time we enter tcp_seek_last_pos(), we are not able to seek past already found sockets. Reported-by: PK CC: Tom Herbert Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/tcp_ipv4.c | 1 - 1 file changed, 1 deletion(-) diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 856f68466d4..02f583b3744 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -1994,7 +1994,6 @@ static void *listening_get_next(struct seq_file *seq, void *cur) } req = req->dl_next; } - st->offset = 0; if (++st->sbucket >= icsk->icsk_accept_queue.listen_opt->nr_table_entries) break; get_req: -- cgit v1.2.3-18-g5258 From 3dce38a02d6370dca690cd923619d4b00024b723 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Fri, 21 Jan 2011 16:35:18 +0000 Subject: dcbnl: make get_app handling symmetric for IEEE and CEE DCBx The IEEE get/set app handlers use generic routines and do not require the net_device to implement the dcbnl_ops routines. This patch makes it symmetric so user space and drivers do not have to handle the CEE version and IEEE DCBx versions differently. Signed-off-by: John Fastabend Signed-off-by: David S. Miller --- net/dcb/dcbnl.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/net/dcb/dcbnl.c b/net/dcb/dcbnl.c index d900ab99814..6b03f561cae 100644 --- a/net/dcb/dcbnl.c +++ b/net/dcb/dcbnl.c @@ -583,7 +583,7 @@ static int dcbnl_getapp(struct net_device *netdev, struct nlattr **tb, u8 up, idtype; int ret = -EINVAL; - if (!tb[DCB_ATTR_APP] || !netdev->dcbnl_ops->getapp) + if (!tb[DCB_ATTR_APP]) goto out; ret = nla_parse_nested(app_tb, DCB_APP_ATTR_MAX, tb[DCB_ATTR_APP], @@ -604,7 +604,16 @@ static int dcbnl_getapp(struct net_device *netdev, struct nlattr **tb, goto out; id = nla_get_u16(app_tb[DCB_APP_ATTR_ID]); - up = netdev->dcbnl_ops->getapp(netdev, idtype, id); + + if (netdev->dcbnl_ops->getapp) { + up = netdev->dcbnl_ops->getapp(netdev, idtype, id); + } else { + struct dcb_app app = { + .selector = idtype, + .protocol = id, + }; + up = dcb_getapp(netdev, &app); + } /* send this back */ dcbnl_skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); -- cgit v1.2.3-18-g5258 From d80bc0fd262ef840ed4e82593ad6416fa1ba3fc4 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 24 Jan 2011 16:01:58 -0800 Subject: ipv6: Always clone offlink routes. Do not handle PMTU vs. route lookup creation any differently wrt. offlink routes, always clone them. Reported-by: PK Signed-off-by: David S. Miller --- net/ipv6/route.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 373bd0416f6..1534508f6c6 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -72,8 +72,6 @@ #define RT6_TRACE(x...) do { ; } while (0) #endif -#define CLONE_OFFLINK_ROUTE 0 - static struct rt6_info * ip6_rt_copy(struct rt6_info *ort); static struct dst_entry *ip6_dst_check(struct dst_entry *dst, u32 cookie); static unsigned int ip6_default_advmss(const struct dst_entry *dst); @@ -738,13 +736,8 @@ restart: if (!rt->rt6i_nexthop && !(rt->rt6i_flags & RTF_NONEXTHOP)) nrt = rt6_alloc_cow(rt, &fl->fl6_dst, &fl->fl6_src); - else { -#if CLONE_OFFLINK_ROUTE + else nrt = rt6_alloc_clone(rt, &fl->fl6_dst); -#else - goto out2; -#endif - } dst_release(&rt->dst); rt = nrt ? : net->ipv6.ip6_null_entry; -- cgit v1.2.3-18-g5258 From 1c2a679aa99d4b9d01004863d72d818534d4ac54 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 18 Jan 2011 14:46:19 +1000 Subject: drm/nouveau: remove dead function definition Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_drv.h | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index 51920321d05..ca707d18d06 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -846,9 +846,6 @@ extern void nv10_mem_put_tile_region(struct drm_device *dev, struct nouveau_fence *fence); extern const struct ttm_mem_type_manager_func nouveau_vram_manager; -/* nvc0_vram.c */ -extern const struct ttm_mem_type_manager_func nvc0_vram_manager; - /* nouveau_notifier.c */ extern int nouveau_notifier_init_channel(struct nouveau_channel *); extern void nouveau_notifier_takedown_channel(struct nouveau_channel *); -- cgit v1.2.3-18-g5258 From b26e72fbb58d3665a75b58679535a8e283da5a11 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 19 Jan 2011 15:54:10 +1000 Subject: drm/nouveau: probe for adt7473 before f75375 There's a reported case where probing for f75375 causes the system to hang completely, in this case there's an adt7473 at the same i2c address. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_temp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_temp.c b/drivers/gpu/drm/nouveau/nouveau_temp.c index 7ecc4adc1e4..8d9968e1cba 100644 --- a/drivers/gpu/drm/nouveau/nouveau_temp.c +++ b/drivers/gpu/drm/nouveau/nouveau_temp.c @@ -265,8 +265,8 @@ nouveau_temp_probe_i2c(struct drm_device *dev) struct i2c_board_info info[] = { { I2C_BOARD_INFO("w83l785ts", 0x2d) }, { I2C_BOARD_INFO("w83781d", 0x2d) }, - { I2C_BOARD_INFO("f75375", 0x2e) }, { I2C_BOARD_INFO("adt7473", 0x2e) }, + { I2C_BOARD_INFO("f75375", 0x2e) }, { I2C_BOARD_INFO("lm99", 0x4c) }, { } }; -- cgit v1.2.3-18-g5258 From 0f1cb203b46f8f836afdd2198060ff6169aa7272 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 21 Jan 2011 11:15:16 +1000 Subject: drm/nvc0: fix incorrect TPC register setup Was hitting TPC+1's regs by accident, oops. Reported-by: Christoph Bumiller Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvc0_graph.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nvc0_graph.c b/drivers/gpu/drm/nouveau/nvc0_graph.c index e6ea7d83187..df393f01bf0 100644 --- a/drivers/gpu/drm/nouveau/nvc0_graph.c +++ b/drivers/gpu/drm/nouveau/nvc0_graph.c @@ -512,8 +512,8 @@ nvc0_graph_init_gpc_1(struct drm_device *dev) nv_wr32(dev, TP_UNIT(gpc, tp, 0x224), 0xc0000000); nv_wr32(dev, TP_UNIT(gpc, tp, 0x48c), 0xc0000000); nv_wr32(dev, TP_UNIT(gpc, tp, 0x084), 0xc0000000); - nv_wr32(dev, TP_UNIT(gpc, tp, 0xe44), 0x001ffffe); - nv_wr32(dev, TP_UNIT(gpc, tp, 0xe4c), 0x0000000f); + nv_wr32(dev, TP_UNIT(gpc, tp, 0x644), 0x001ffffe); + nv_wr32(dev, TP_UNIT(gpc, tp, 0x64c), 0x0000000f); } nv_wr32(dev, GPC_UNIT(gpc, 0x2c90), 0xffffffff); nv_wr32(dev, GPC_UNIT(gpc, 0x2c94), 0xffffffff); -- cgit v1.2.3-18-g5258 From 51f73d64b46cb765cd5bee3b8d9f5980c44c6446 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 21 Jan 2011 13:53:21 +1000 Subject: drm/nvc0: implement irq handler for whatever's at 0x14xxxx This is just barely enough to stop a never-ending IRQ storm that can be triggered by our 3D driver. We have no idea what this engine is.. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvc0_graph.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nvc0_graph.c b/drivers/gpu/drm/nouveau/nvc0_graph.c index df393f01bf0..eb18a7e89f5 100644 --- a/drivers/gpu/drm/nouveau/nvc0_graph.c +++ b/drivers/gpu/drm/nouveau/nvc0_graph.c @@ -31,6 +31,7 @@ #include "nvc0_graph.h" static void nvc0_graph_isr(struct drm_device *); +static void nvc0_runk140_isr(struct drm_device *); static int nvc0_graph_unload_context_to(struct drm_device *dev, u64 chan); void @@ -281,6 +282,7 @@ nvc0_graph_destroy(struct drm_device *dev) return; nouveau_irq_unregister(dev, 12); + nouveau_irq_unregister(dev, 25); nouveau_gpuobj_ref(NULL, &priv->unk4188b8); nouveau_gpuobj_ref(NULL, &priv->unk4188b4); @@ -390,6 +392,7 @@ nvc0_graph_create(struct drm_device *dev) } nouveau_irq_register(dev, 12, nvc0_graph_isr); + nouveau_irq_register(dev, 25, nvc0_runk140_isr); NVOBJ_CLASS(dev, 0x902d, GR); /* 2D */ NVOBJ_CLASS(dev, 0x9039, GR); /* M2MF */ NVOBJ_CLASS(dev, 0x9097, GR); /* 3D */ @@ -777,3 +780,19 @@ nvc0_graph_isr(struct drm_device *dev) nv_wr32(dev, 0x400500, 0x00010001); } + +static void +nvc0_runk140_isr(struct drm_device *dev) +{ + u32 units = nv_rd32(dev, 0x00017c) & 0x1f; + + while (units) { + u32 unit = ffs(units) - 1; + u32 reg = 0x140000 + unit * 0x2000; + u32 st0 = nv_mask(dev, reg + 0x1020, 0, 0); + u32 st1 = nv_mask(dev, reg + 0x1420, 0, 0); + + NV_INFO(dev, "PRUNK140: %d 0x%08x 0x%08x\n", unit, st0, st1); + units &= ~(1 << unit); + } +} -- cgit v1.2.3-18-g5258 From 670820c0e6a9c82dd2f96663dc4c6aec2a18c32b Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Sat, 25 Dec 2010 15:43:30 +0100 Subject: drm/nouveau: Workaround incorrect DCB entry on a GeForce3 Ti 200. Fixes the DVI-D output on that board (fdo bug 32645). Reported-by: Bryan Quigley Signed-off-by: Francisco Jerez Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_bios.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c index d3046559bf0..c85a7159668 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.c +++ b/drivers/gpu/drm/nouveau/nouveau_bios.c @@ -6310,6 +6310,9 @@ void merge_like_dcb_entries(struct drm_device *dev, struct dcb_table *dcb) static bool apply_dcb_encoder_quirks(struct drm_device *dev, int idx, u32 *conn, u32 *conf) { + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct dcb_table *dcb = &dev_priv->vbios.dcb; + /* Dell Precision M6300 * DCB entry 2: 02025312 00000010 * DCB entry 3: 02026312 00000020 @@ -6327,6 +6330,18 @@ apply_dcb_encoder_quirks(struct drm_device *dev, int idx, u32 *conn, u32 *conf) return false; } + /* GeForce3 Ti 200 + * + * DCB reports an LVDS output that should be TMDS: + * DCB entry 1: f2005014 ffffffff + */ + if (nv_match_device(dev, 0x0201, 0x1462, 0x8851)) { + if (*conn == 0xf2005014 && *conf == 0xffffffff) { + fabricate_dcb_output(dcb, OUTPUT_TMDS, 1, 1, 1); + return false; + } + } + return true; } -- cgit v1.2.3-18-g5258 From 34311c730147def6862304488ee1f7c3f4acd74b Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Mon, 24 Jan 2011 01:47:42 +0100 Subject: drm/nv50: Fix race with PFIFO during PGRAPH context destruction. Reported-by: Xavier Chantry Signed-off-by: Francisco Jerez Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv50_graph.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nv50_graph.c b/drivers/gpu/drm/nouveau/nv50_graph.c index 2d7ea75a09d..37e21d2be95 100644 --- a/drivers/gpu/drm/nouveau/nv50_graph.c +++ b/drivers/gpu/drm/nouveau/nv50_graph.c @@ -256,6 +256,7 @@ nv50_graph_destroy_context(struct nouveau_channel *chan) struct drm_device *dev = chan->dev; struct drm_nouveau_private *dev_priv = dev->dev_private; struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph; + struct nouveau_fifo_engine *pfifo = &dev_priv->engine.fifo; int i, hdr = (dev_priv->chipset == 0x50) ? 0x200 : 0x20; unsigned long flags; @@ -265,6 +266,7 @@ nv50_graph_destroy_context(struct nouveau_channel *chan) return; spin_lock_irqsave(&dev_priv->context_switch_lock, flags); + pfifo->reassign(dev, false); pgraph->fifo_access(dev, false); if (pgraph->channel(dev) == chan) @@ -275,6 +277,7 @@ nv50_graph_destroy_context(struct nouveau_channel *chan) dev_priv->engine.instmem.flush(dev); pgraph->fifo_access(dev, true); + pfifo->reassign(dev, true); spin_unlock_irqrestore(&dev_priv->context_switch_lock, flags); nouveau_gpuobj_ref(NULL, &chan->ramin_grctx); -- cgit v1.2.3-18-g5258 From 5d07929808a6430d3d844db4da828dfadbc49cd2 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 21 Jan 2011 22:34:13 +1000 Subject: drm/nvc0/grctx: correct an off-by-one Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvc0_grctx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nvc0_grctx.c b/drivers/gpu/drm/nouveau/nvc0_grctx.c index b9e68b2d30a..f880ff776db 100644 --- a/drivers/gpu/drm/nouveau/nvc0_grctx.c +++ b/drivers/gpu/drm/nouveau/nvc0_grctx.c @@ -1830,7 +1830,7 @@ nvc0_grctx_generate(struct nouveau_channel *chan) for (tp = 0, id = 0; tp < 4; tp++) { for (gpc = 0; gpc < priv->gpc_nr; gpc++) { - if (tp <= priv->tp_nr[gpc]) { + if (tp < priv->tp_nr[gpc]) { nv_wr32(dev, TP_UNIT(gpc, tp, 0x698), id); nv_wr32(dev, TP_UNIT(gpc, tp, 0x4e8), id); nv_wr32(dev, GPC_UNIT(gpc, 0x0c10 + tp * 4), id); -- cgit v1.2.3-18-g5258 From b7c7d01aaed1f71d9afe815a569f0a81465a1744 Mon Sep 17 00:00:00 2001 From: Eugene Teo Date: Mon, 24 Jan 2011 21:05:17 -0800 Subject: net: clear heap allocation for ethtool_get_regs() There is a conflict between commit b00916b1 and a77f5db3. This patch resolves the conflict by clearing the heap allocation in ethtool_get_regs(). Cc: stable@kernel.org Signed-off-by: Eugene Teo Signed-off-by: David S. Miller --- net/core/ethtool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/ethtool.c b/net/core/ethtool.c index 17741782a34..ff2302910b5 100644 --- a/net/core/ethtool.c +++ b/net/core/ethtool.c @@ -817,7 +817,7 @@ static int ethtool_get_regs(struct net_device *dev, char __user *useraddr) if (regs.len > reglen) regs.len = reglen; - regbuf = vmalloc(reglen); + regbuf = vzalloc(reglen); if (!regbuf) return -ENOMEM; -- cgit v1.2.3-18-g5258 From c9ba374d24882c04e7cc000d8cf3b0fe56511b84 Mon Sep 17 00:00:00 2001 From: Andreas Mohr Date: Tue, 25 Jan 2011 06:46:31 +0100 Subject: ALSA: azt3328 - fix broken AZF_FMT_XLATE macro Cleanly revert to non-macro implementation of snd_azf3328_codec_setfmt(), to fix last-minute functionality breakage induced by following checkpatch.pl recommendations without giving them their due full share of thought ("revolting computer, ensuing PEBKAC"). I would like to thank Jiri Slaby for his very timely (in -rc1 even) and unexpected (uncommon hardware) "recognition of the dangerous situation" due to his very commendable static parser use. :) Reported-by: Jiri Slaby Signed-off-by: Andreas Mohr Signed-off-by: Takashi Iwai --- sound/pci/azt3328.c | 38 ++++++++++++++++---------------------- 1 file changed, 16 insertions(+), 22 deletions(-) diff --git a/sound/pci/azt3328.c b/sound/pci/azt3328.c index 6117595fc07..573594bf322 100644 --- a/sound/pci/azt3328.c +++ b/sound/pci/azt3328.c @@ -979,31 +979,25 @@ snd_azf3328_codec_setfmt(struct snd_azf3328_codec_data *codec, snd_azf3328_dbgcallenter(); switch (bitrate) { -#define AZF_FMT_XLATE(in_freq, out_bits) \ - do { \ - case AZF_FREQ_ ## in_freq: \ - freq = SOUNDFORMAT_FREQ_ ## out_bits; \ - break; \ - } while (0); - AZF_FMT_XLATE(4000, SUSPECTED_4000) - AZF_FMT_XLATE(4800, SUSPECTED_4800) - /* the AZF3328 names it "5510" for some strange reason: */ - AZF_FMT_XLATE(5512, 5510) - AZF_FMT_XLATE(6620, 6620) - AZF_FMT_XLATE(8000, 8000) - AZF_FMT_XLATE(9600, 9600) - AZF_FMT_XLATE(11025, 11025) - AZF_FMT_XLATE(13240, SUSPECTED_13240) - AZF_FMT_XLATE(16000, 16000) - AZF_FMT_XLATE(22050, 22050) - AZF_FMT_XLATE(32000, 32000) + case AZF_FREQ_4000: freq = SOUNDFORMAT_FREQ_SUSPECTED_4000; break; + case AZF_FREQ_4800: freq = SOUNDFORMAT_FREQ_SUSPECTED_4800; break; + case AZF_FREQ_5512: + /* the AZF3328 names it "5510" for some strange reason */ + freq = SOUNDFORMAT_FREQ_5510; break; + case AZF_FREQ_6620: freq = SOUNDFORMAT_FREQ_6620; break; + case AZF_FREQ_8000: freq = SOUNDFORMAT_FREQ_8000; break; + case AZF_FREQ_9600: freq = SOUNDFORMAT_FREQ_9600; break; + case AZF_FREQ_11025: freq = SOUNDFORMAT_FREQ_11025; break; + case AZF_FREQ_13240: freq = SOUNDFORMAT_FREQ_SUSPECTED_13240; break; + case AZF_FREQ_16000: freq = SOUNDFORMAT_FREQ_16000; break; + case AZF_FREQ_22050: freq = SOUNDFORMAT_FREQ_22050; break; + case AZF_FREQ_32000: freq = SOUNDFORMAT_FREQ_32000; break; default: snd_printk(KERN_WARNING "unknown bitrate %d, assuming 44.1kHz!\n", bitrate); /* fall-through */ - AZF_FMT_XLATE(44100, 44100) - AZF_FMT_XLATE(48000, 48000) - AZF_FMT_XLATE(66200, SUSPECTED_66200) -#undef AZF_FMT_XLATE + case AZF_FREQ_44100: freq = SOUNDFORMAT_FREQ_44100; break; + case AZF_FREQ_48000: freq = SOUNDFORMAT_FREQ_48000; break; + case AZF_FREQ_66200: freq = SOUNDFORMAT_FREQ_SUSPECTED_66200; break; } /* val = 0xff07; 3m27.993s (65301Hz; -> 64000Hz???) hmm, 66120, 65967, 66123 */ /* val = 0xff09; 17m15.098s (13123,478Hz; -> 12000Hz???) hmm, 13237.2Hz? */ -- cgit v1.2.3-18-g5258 From 7c8104774e59549c37dd1cb0a8ec4f131094664c Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 24 Jan 2011 12:59:02 +0000 Subject: bnx2: Always set ETH_FLAG_TXVLAN TSO does not work if the VLAN tag is in the packet (non-accelerated). We may be able to remove this restriction in future firmware. Reported-by: Eric Dumazet Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index df99edf3464..99e7652e216 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -7553,6 +7553,10 @@ bnx2_set_flags(struct net_device *dev, u32 data) !(data & ETH_FLAG_RXVLAN)) return -EINVAL; + /* TSO with VLAN tag won't work with current firmware */ + if (!(data & ETH_FLAG_TXVLAN)) + return -EINVAL; + rc = ethtool_op_set_flags(dev, data, ETH_FLAG_RXHASH | ETH_FLAG_RXVLAN | ETH_FLAG_TXVLAN); if (rc) -- cgit v1.2.3-18-g5258 From 2321f3b4afc7c017f34b0cad0624b3b9ebdf2ba4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 24 Jan 2011 23:19:10 -0800 Subject: pch_gbe: don't use flush_scheduled_work() Directly cancel adapter->reset_task instead of using to-be-deprecated flush_scheduled_work(). Signed-off-by: Tejun Heo Signed-off-by: David S. Miller --- drivers/net/pch_gbe/pch_gbe_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/pch_gbe/pch_gbe_main.c b/drivers/net/pch_gbe/pch_gbe_main.c index d7355306a73..1bf12339441 100644 --- a/drivers/net/pch_gbe/pch_gbe_main.c +++ b/drivers/net/pch_gbe/pch_gbe_main.c @@ -2247,7 +2247,7 @@ static void pch_gbe_remove(struct pci_dev *pdev) struct net_device *netdev = pci_get_drvdata(pdev); struct pch_gbe_adapter *adapter = netdev_priv(netdev); - flush_scheduled_work(); + cancel_work_sync(&adapter->reset_task); unregister_netdev(netdev); pch_gbe_hal_phy_hw_reset(&adapter->hw); -- cgit v1.2.3-18-g5258 From 986e3f6e2b4582d9a7e61de5090042d5af85da44 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sun, 23 Jan 2011 12:19:55 +0000 Subject: USB NET KL5KUSB101: Fix mem leak in error path of kaweth_download_firmware() We will leak the storage allocated by request_firmware() if the size of the firmware is greater than KAWETH_FIRMWARE_BUF_SIZE. This removes the leak by calling release_firmware() before we return -ENOSPC. Signed-off-by: Jesper Juhl Signed-off-by: David S. Miller --- drivers/net/usb/kaweth.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c index 5e98643a4a2..7dc84971f26 100644 --- a/drivers/net/usb/kaweth.c +++ b/drivers/net/usb/kaweth.c @@ -406,6 +406,7 @@ static int kaweth_download_firmware(struct kaweth_device *kaweth, if (fw->size > KAWETH_FIRMWARE_BUF_SIZE) { err("Firmware too big: %zu", fw->size); + release_firmware(fw); return -ENOSPC; } data_len = fw->size; -- cgit v1.2.3-18-g5258 From de0368d5fec7b9ef95228510f2edb79610beb448 Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Mon, 24 Jan 2011 02:41:37 +0000 Subject: textsearch: doc - fix spelling in lib/textsearch.c. Found the following spelling errors while reading the textsearch code: "facitilies" -> "facilities" "continously" -> "continuously" "arbitary" -> "arbitrary" "patern" -> "pattern" "occurences" -> "occurrences" I'll try to push this patch through DaveM, given the only users of textsearch is in the net/ tree (nf_conntrack_amanda.c, xt_string.c and em_text.c) Signed-off-by: Jesper Sander Signed-off-by: Jesper Dangaard Brouer Signed-off-by: David S. Miller --- lib/textsearch.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/lib/textsearch.c b/lib/textsearch.c index d608331b3e4..e0cc0146ae6 100644 --- a/lib/textsearch.c +++ b/lib/textsearch.c @@ -13,7 +13,7 @@ * * INTRODUCTION * - * The textsearch infrastructure provides text searching facitilies for + * The textsearch infrastructure provides text searching facilities for * both linear and non-linear data. Individual search algorithms are * implemented in modules and chosen by the user. * @@ -43,7 +43,7 @@ * to the algorithm to store persistent variables. * (4) Core eventually resets the search offset and forwards the find() * request to the algorithm. - * (5) Algorithm calls get_next_block() provided by the user continously + * (5) Algorithm calls get_next_block() provided by the user continuously * to fetch the data to be searched in block by block. * (6) Algorithm invokes finish() after the last call to get_next_block * to clean up any leftovers from get_next_block. (Optional) @@ -58,15 +58,15 @@ * the pattern to look for and flags. As a flag, you can set TS_IGNORECASE * to perform case insensitive matching. But it might slow down * performance of algorithm, so you should use it at own your risk. - * The returned configuration may then be used for an arbitary + * The returned configuration may then be used for an arbitrary * amount of times and even in parallel as long as a separate struct * ts_state variable is provided to every instance. * * The actual search is performed by either calling textsearch_find_- * continuous() for linear data or by providing an own get_next_block() * implementation and calling textsearch_find(). Both functions return - * the position of the first occurrence of the patern or UINT_MAX if - * no match was found. Subsequent occurences can be found by calling + * the position of the first occurrence of the pattern or UINT_MAX if + * no match was found. Subsequent occurrences can be found by calling * textsearch_next() regardless of the linearity of the data. * * Once you're done using a configuration it must be given back via -- cgit v1.2.3-18-g5258 From 81d7da5404aad930a4e4f6111e4f16b752183018 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 24 Jan 2011 22:09:22 +0100 Subject: ASoC: Fix codec device id format used by some dai_links The id part of an I2C device name is created with the "%d-%04x" format string. So for example for an I2C device which is connected to the adapter with the id 0 and has its address set to 0x1a the id part of the devices name would be "0-001a". Currently some sound board drivers have the id part the codec_name field of their dai_link structures set as if it had been created by a "%d-0x%x" format string. For example "0-0x1a" instead of "0-001a". As a result there is no match between the codec device and the dai_link and no sound card is instantiated. This patch fixes it. Signed-off-by: Lars-Peter Clausen Acked-by: Liam Girdwood Signed-off-by: Mark Brown Cc: stable@kernel.org --- sound/soc/atmel/snd-soc-afeb9260.c | 2 +- sound/soc/blackfin/bf5xx-ssm2602.c | 2 +- sound/soc/samsung/neo1973_gta02_wm8753.c | 4 ++-- sound/soc/samsung/neo1973_wm8753.c | 4 ++-- sound/soc/samsung/s3c24xx_simtec_hermes.c | 2 +- sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c | 2 +- 6 files changed, 8 insertions(+), 8 deletions(-) diff --git a/sound/soc/atmel/snd-soc-afeb9260.c b/sound/soc/atmel/snd-soc-afeb9260.c index da2208e06b0..5e4d499d843 100644 --- a/sound/soc/atmel/snd-soc-afeb9260.c +++ b/sound/soc/atmel/snd-soc-afeb9260.c @@ -129,7 +129,7 @@ static struct snd_soc_dai_link afeb9260_dai = { .cpu_dai_name = "atmel-ssc-dai.0", .codec_dai_name = "tlv320aic23-hifi", .platform_name = "atmel_pcm-audio", - .codec_name = "tlv320aic23-codec.0-0x1a", + .codec_name = "tlv320aic23-codec.0-001a", .init = afeb9260_tlv320aic23_init, .ops = &afeb9260_ops, }; diff --git a/sound/soc/blackfin/bf5xx-ssm2602.c b/sound/soc/blackfin/bf5xx-ssm2602.c index e902b24c185..ad28663f5bb 100644 --- a/sound/soc/blackfin/bf5xx-ssm2602.c +++ b/sound/soc/blackfin/bf5xx-ssm2602.c @@ -119,7 +119,7 @@ static struct snd_soc_dai_link bf5xx_ssm2602_dai = { .cpu_dai_name = "bf5xx-i2s", .codec_dai_name = "ssm2602-hifi", .platform_name = "bf5xx-pcm-audio", - .codec_name = "ssm2602-codec.0-0x1b", + .codec_name = "ssm2602-codec.0-001b", .ops = &bf5xx_ssm2602_ops, }; diff --git a/sound/soc/samsung/neo1973_gta02_wm8753.c b/sound/soc/samsung/neo1973_gta02_wm8753.c index 3eec610c10f..9e05e10b86a 100644 --- a/sound/soc/samsung/neo1973_gta02_wm8753.c +++ b/sound/soc/samsung/neo1973_gta02_wm8753.c @@ -401,7 +401,7 @@ static struct snd_soc_dai_link neo1973_gta02_dai[] = { .codec_dai_name = "wm8753-hifi", .init = neo1973_gta02_wm8753_init, .platform_name = "samsung-audio", - .codec_name = "wm8753-codec.0-0x1a", + .codec_name = "wm8753-codec.0-001a", .ops = &neo1973_gta02_hifi_ops, }, { /* Voice via BT */ @@ -410,7 +410,7 @@ static struct snd_soc_dai_link neo1973_gta02_dai[] = { .cpu_dai_name = "bluetooth-dai", .codec_dai_name = "wm8753-voice", .ops = &neo1973_gta02_voice_ops, - .codec_name = "wm8753-codec.0-0x1a", + .codec_name = "wm8753-codec.0-001a", .platform_name = "samsung-audio", }, }; diff --git a/sound/soc/samsung/neo1973_wm8753.c b/sound/soc/samsung/neo1973_wm8753.c index c7a24514beb..cf69e146890 100644 --- a/sound/soc/samsung/neo1973_wm8753.c +++ b/sound/soc/samsung/neo1973_wm8753.c @@ -561,7 +561,7 @@ static struct snd_soc_dai_link neo1973_dai[] = { .platform_name = "samsung-audio", .cpu_dai_name = "s3c24xx-i2s", .codec_dai_name = "wm8753-hifi", - .codec_name = "wm8753-codec.0-0x1a", + .codec_name = "wm8753-codec.0-001a", .init = neo1973_wm8753_init, .ops = &neo1973_hifi_ops, }, @@ -571,7 +571,7 @@ static struct snd_soc_dai_link neo1973_dai[] = { .platform_name = "samsung-audio", .cpu_dai_name = "bluetooth-dai", .codec_dai_name = "wm8753-voice", - .codec_name = "wm8753-codec.0-0x1a", + .codec_name = "wm8753-codec.0-001a", .ops = &neo1973_voice_ops, }, }; diff --git a/sound/soc/samsung/s3c24xx_simtec_hermes.c b/sound/soc/samsung/s3c24xx_simtec_hermes.c index bb4292e3596..287a97164ab 100644 --- a/sound/soc/samsung/s3c24xx_simtec_hermes.c +++ b/sound/soc/samsung/s3c24xx_simtec_hermes.c @@ -94,7 +94,7 @@ static int simtec_hermes_init(struct snd_soc_pcm_runtime *rtd) static struct snd_soc_dai_link simtec_dai_aic33 = { .name = "tlv320aic33", .stream_name = "TLV320AIC33", - .codec_name = "tlv320aic3x-codec.0-0x1a", + .codec_name = "tlv320aic3x-codec.0-001a", .cpu_dai_name = "s3c24xx-i2s", .codec_dai_name = "tlv320aic3x-hifi", .platform_name = "samsung-audio", diff --git a/sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c b/sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c index fbba4e36772..d2b14ba6f9e 100644 --- a/sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c +++ b/sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c @@ -85,7 +85,7 @@ static int simtec_tlv320aic23_init(struct snd_soc_pcm_runtime *rtd) static struct snd_soc_dai_link simtec_dai_aic23 = { .name = "tlv320aic23", .stream_name = "TLV320AIC23", - .codec_name = "tlv320aic3x-codec.0-0x1a", + .codec_name = "tlv320aic3x-codec.0-001a", .cpu_dai_name = "s3c24xx-i2s", .codec_dai_name = "tlv320aic3x-hifi", .platform_name = "samsung-audio", -- cgit v1.2.3-18-g5258 From 518aa59f6e45b3c90b849187ae1d56757d074b92 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 24 Jan 2011 22:12:42 +0100 Subject: ASoC: Samsung: Fix outdated cpu_dai_name for s3c24xx i2s During the multi-component patch the s3c24xx i2s driver was renamed from "s3c24xx-i2s" to "s3c24xx-iis", while the sound board drivers were not updated to reflect this change as well. As a result there is no match between the dai_link and the i2s driver and no sound card is instantiated. This patch fixes the problem by updating the sound board drivers to use "s3c24xx-iis" for the cpu_dai_name. Signed-off-by: Lars-Peter Clausen Acked-by: Jassi Brar Acked-by: Liam Girdwood Signed-off-by: Mark Brown Cc: stable@kernel.org --- sound/soc/samsung/neo1973_gta02_wm8753.c | 2 +- sound/soc/samsung/neo1973_wm8753.c | 2 +- sound/soc/samsung/s3c24xx_simtec_hermes.c | 2 +- sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c | 2 +- sound/soc/samsung/s3c24xx_uda134x.c | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) diff --git a/sound/soc/samsung/neo1973_gta02_wm8753.c b/sound/soc/samsung/neo1973_gta02_wm8753.c index 9e05e10b86a..0d0ae2b9eef 100644 --- a/sound/soc/samsung/neo1973_gta02_wm8753.c +++ b/sound/soc/samsung/neo1973_gta02_wm8753.c @@ -397,7 +397,7 @@ static struct snd_soc_dai_link neo1973_gta02_dai[] = { { /* Hifi Playback - for similatious use with voice below */ .name = "WM8753", .stream_name = "WM8753 HiFi", - .cpu_dai_name = "s3c24xx-i2s", + .cpu_dai_name = "s3c24xx-iis", .codec_dai_name = "wm8753-hifi", .init = neo1973_gta02_wm8753_init, .platform_name = "samsung-audio", diff --git a/sound/soc/samsung/neo1973_wm8753.c b/sound/soc/samsung/neo1973_wm8753.c index cf69e146890..d20815d5ab2 100644 --- a/sound/soc/samsung/neo1973_wm8753.c +++ b/sound/soc/samsung/neo1973_wm8753.c @@ -559,7 +559,7 @@ static struct snd_soc_dai_link neo1973_dai[] = { .name = "WM8753", .stream_name = "WM8753 HiFi", .platform_name = "samsung-audio", - .cpu_dai_name = "s3c24xx-i2s", + .cpu_dai_name = "s3c24xx-iis", .codec_dai_name = "wm8753-hifi", .codec_name = "wm8753-codec.0-001a", .init = neo1973_wm8753_init, diff --git a/sound/soc/samsung/s3c24xx_simtec_hermes.c b/sound/soc/samsung/s3c24xx_simtec_hermes.c index 287a97164ab..08fcaaa6690 100644 --- a/sound/soc/samsung/s3c24xx_simtec_hermes.c +++ b/sound/soc/samsung/s3c24xx_simtec_hermes.c @@ -95,7 +95,7 @@ static struct snd_soc_dai_link simtec_dai_aic33 = { .name = "tlv320aic33", .stream_name = "TLV320AIC33", .codec_name = "tlv320aic3x-codec.0-001a", - .cpu_dai_name = "s3c24xx-i2s", + .cpu_dai_name = "s3c24xx-iis", .codec_dai_name = "tlv320aic3x-hifi", .platform_name = "samsung-audio", .init = simtec_hermes_init, diff --git a/sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c b/sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c index d2b14ba6f9e..116e3e67016 100644 --- a/sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c +++ b/sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c @@ -86,7 +86,7 @@ static struct snd_soc_dai_link simtec_dai_aic23 = { .name = "tlv320aic23", .stream_name = "TLV320AIC23", .codec_name = "tlv320aic3x-codec.0-001a", - .cpu_dai_name = "s3c24xx-i2s", + .cpu_dai_name = "s3c24xx-iis", .codec_dai_name = "tlv320aic3x-hifi", .platform_name = "samsung-audio", .init = simtec_tlv320aic23_init, diff --git a/sound/soc/samsung/s3c24xx_uda134x.c b/sound/soc/samsung/s3c24xx_uda134x.c index cdc8ecbcb8e..2c09e93dd56 100644 --- a/sound/soc/samsung/s3c24xx_uda134x.c +++ b/sound/soc/samsung/s3c24xx_uda134x.c @@ -228,7 +228,7 @@ static struct snd_soc_dai_link s3c24xx_uda134x_dai_link = { .stream_name = "UDA134X", .codec_name = "uda134x-hifi", .codec_dai_name = "uda134x-hifi", - .cpu_dai_name = "s3c24xx-i2s", + .cpu_dai_name = "s3c24xx-iis", .ops = &s3c24xx_uda134x_ops, .platform_name = "samsung-audio", }; -- cgit v1.2.3-18-g5258 From a3adfa00e8089aa72826c6ba04bcb18cfceaf0a9 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Fri, 21 Jan 2011 22:14:17 +0300 Subject: ASoC: correct link specifications for corgi, poodle and spitz ASoC DAI link descriptions for Corgi, Poodle and Spitz platforms contained incorrect names for cpu_dai and codec, which effectievly disabled sound on theese platforms. Fix that errors. Signed-off-by: Dmitry Eremin-Solenikov Acked-by: Liam Girdwood Signed-off-by: Mark Brown Cc: stable@kernel.org --- sound/soc/pxa/corgi.c | 4 ++-- sound/soc/pxa/poodle.c | 2 +- sound/soc/pxa/spitz.c | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c index fc592f0d5fc..784cff5f67e 100644 --- a/sound/soc/pxa/corgi.c +++ b/sound/soc/pxa/corgi.c @@ -307,10 +307,10 @@ static int corgi_wm8731_init(struct snd_soc_pcm_runtime *rtd) static struct snd_soc_dai_link corgi_dai = { .name = "WM8731", .stream_name = "WM8731", - .cpu_dai_name = "pxa-is2-dai", + .cpu_dai_name = "pxa2xx-i2s", .codec_dai_name = "wm8731-hifi", .platform_name = "pxa-pcm-audio", - .codec_name = "wm8731-codec-0.001a", + .codec_name = "wm8731-codec-0.001b", .init = corgi_wm8731_init, .ops = &corgi_ops, }; diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c index 6298ee115e2..a7d4999f9b2 100644 --- a/sound/soc/pxa/poodle.c +++ b/sound/soc/pxa/poodle.c @@ -276,7 +276,7 @@ static struct snd_soc_dai_link poodle_dai = { .cpu_dai_name = "pxa2xx-i2s", .codec_dai_name = "wm8731-hifi", .platform_name = "pxa-pcm-audio", - .codec_name = "wm8731-codec.0-001a", + .codec_name = "wm8731-codec.0-001b", .init = poodle_wm8731_init, .ops = &poodle_ops, }; diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c index c2acb69b957..8e157135063 100644 --- a/sound/soc/pxa/spitz.c +++ b/sound/soc/pxa/spitz.c @@ -315,10 +315,10 @@ static int spitz_wm8750_init(struct snd_soc_pcm_runtime *rtd) static struct snd_soc_dai_link spitz_dai = { .name = "wm8750", .stream_name = "WM8750", - .cpu_dai_name = "pxa-is2", + .cpu_dai_name = "pxa2xx-i2s", .codec_dai_name = "wm8750-hifi", .platform_name = "pxa-pcm-audio", - .codec_name = "wm8750-codec.0-001a", + .codec_name = "wm8750-codec.0-001b", .init = spitz_wm8750_init, .ops = &spitz_ops, }; -- cgit v1.2.3-18-g5258 From d66bbd441c08fe00ed2add1cf70cb243ebc2b27e Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Fri, 21 Jan 2011 21:16:46 -0800 Subject: ceph: avoid picking MDS that is not active Ignore replication or auth frag data if it indicates an MDS that is not active. This can happen if the MDS shuts down and the client has stale data about the namespace distribution across the MDS cluster. If that's the case, fall back to directing the request based on the auth cap (which should always be accurate). Signed-off-by: Sage Weil --- fs/ceph/mds_client.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c index 509339ceef7..a6949cc7c69 100644 --- a/fs/ceph/mds_client.c +++ b/fs/ceph/mds_client.c @@ -693,9 +693,11 @@ static int __choose_mds(struct ceph_mds_client *mdsc, dout("choose_mds %p %llx.%llx " "frag %u mds%d (%d/%d)\n", inode, ceph_vinop(inode), - frag.frag, frag.mds, + frag.frag, mds, (int)r, frag.ndist); - return mds; + if (ceph_mdsmap_get_state(mdsc->mdsmap, mds) >= + CEPH_MDS_STATE_ACTIVE) + return mds; } /* since this file/dir wasn't known to be @@ -708,7 +710,9 @@ static int __choose_mds(struct ceph_mds_client *mdsc, dout("choose_mds %p %llx.%llx " "frag %u mds%d (auth)\n", inode, ceph_vinop(inode), frag.frag, mds); - return mds; + if (ceph_mdsmap_get_state(mdsc->mdsmap, mds) >= + CEPH_MDS_STATE_ACTIVE) + return mds; } } } -- cgit v1.2.3-18-g5258 From 98bdb0aa007ff7e8e0061936d8d0e210faf2e655 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Tue, 25 Jan 2011 08:17:48 -0800 Subject: libceph: fix socket read error handling If we get EAGAIN when trying to read from the socket, it is not an error. Return 0 from the helper in this case to simplify the error handling cases in the caller (indirectly, try_read). Fix try_read to pass any error to it's caller (con_work) instead of almost always returning 0. This let's us respond to things like socket disconnects. Signed-off-by: Sage Weil --- net/ceph/messenger.c | 39 +++++++++++++++++++-------------------- 1 file changed, 19 insertions(+), 20 deletions(-) diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c index dff633d62e5..d95576d40c9 100644 --- a/net/ceph/messenger.c +++ b/net/ceph/messenger.c @@ -252,8 +252,12 @@ static int ceph_tcp_recvmsg(struct socket *sock, void *buf, size_t len) { struct kvec iov = {buf, len}; struct msghdr msg = { .msg_flags = MSG_DONTWAIT | MSG_NOSIGNAL }; + int r; - return kernel_recvmsg(sock, &msg, &iov, 1, len, msg.msg_flags); + r = kernel_recvmsg(sock, &msg, &iov, 1, len, msg.msg_flags); + if (r == -EAGAIN) + r = 0; + return r; } /* @@ -1821,19 +1825,17 @@ more: dout("try_read connecting\n"); ret = read_partial_banner(con); if (ret <= 0) - goto done; - if (process_banner(con) < 0) { - ret = -1; goto out; - } + ret = process_banner(con); + if (ret < 0) + goto out; } ret = read_partial_connect(con); if (ret <= 0) - goto done; - if (process_connect(con) < 0) { - ret = -1; goto out; - } + ret = process_connect(con); + if (ret < 0) + goto out; goto more; } @@ -1848,7 +1850,7 @@ more: dout("skipping %d / %d bytes\n", skip, -con->in_base_pos); ret = ceph_tcp_recvmsg(con->sock, buf, skip); if (ret <= 0) - goto done; + goto out; con->in_base_pos += ret; if (con->in_base_pos) goto more; @@ -1859,7 +1861,7 @@ more: */ ret = ceph_tcp_recvmsg(con->sock, &con->in_tag, 1); if (ret <= 0) - goto done; + goto out; dout("try_read got tag %d\n", (int)con->in_tag); switch (con->in_tag) { case CEPH_MSGR_TAG_MSG: @@ -1870,7 +1872,7 @@ more: break; case CEPH_MSGR_TAG_CLOSE: set_bit(CLOSED, &con->state); /* fixme */ - goto done; + goto out; default: goto bad_tag; } @@ -1882,13 +1884,12 @@ more: case -EBADMSG: con->error_msg = "bad crc"; ret = -EIO; - goto out; + break; case -EIO: con->error_msg = "io error"; - goto out; - default: - goto done; + break; } + goto out; } if (con->in_tag == CEPH_MSGR_TAG_READY) goto more; @@ -1898,15 +1899,13 @@ more: if (con->in_tag == CEPH_MSGR_TAG_ACK) { ret = read_partial_ack(con); if (ret <= 0) - goto done; + goto out; process_ack(con); goto more; } -done: - ret = 0; out: - dout("try_read done on %p\n", con); + dout("try_read done on %p ret %d\n", con, ret); return ret; bad_tag: -- cgit v1.2.3-18-g5258 From 42961d2333a1855c649fa3790e258ab4f0fa66a4 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Tue, 25 Jan 2011 08:19:34 -0800 Subject: libceph: fix socket write error handling Pass errors from writing to the socket up the stack. If we get -EAGAIN, return 0 from the helper to simplify the callers' checks. Signed-off-by: Sage Weil --- net/ceph/messenger.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c index d95576d40c9..35b36b86d76 100644 --- a/net/ceph/messenger.c +++ b/net/ceph/messenger.c @@ -268,13 +268,17 @@ static int ceph_tcp_sendmsg(struct socket *sock, struct kvec *iov, size_t kvlen, size_t len, int more) { struct msghdr msg = { .msg_flags = MSG_DONTWAIT | MSG_NOSIGNAL }; + int r; if (more) msg.msg_flags |= MSG_MORE; else msg.msg_flags |= MSG_EOR; /* superfluous, but what the hell */ - return kernel_sendmsg(sock, &msg, iov, kvlen, len); + r = kernel_sendmsg(sock, &msg, iov, kvlen, len); + if (r == -EAGAIN) + r = 0; + return r; } @@ -851,6 +855,8 @@ static int write_partial_msg_pages(struct ceph_connection *con) (msg->pages || msg->pagelist || msg->bio || in_trail)) kunmap(page); + if (ret == -EAGAIN) + ret = 0; if (ret <= 0) goto out; @@ -1741,16 +1747,12 @@ more_kvec: if (con->out_skip) { ret = write_partial_skip(con); if (ret <= 0) - goto done; - if (ret < 0) { - dout("try_write write_partial_skip err %d\n", ret); - goto done; - } + goto out; } if (con->out_kvec_left) { ret = write_partial_kvec(con); if (ret <= 0) - goto done; + goto out; } /* msg pages? */ @@ -1765,11 +1767,11 @@ more_kvec: if (ret == 1) goto more_kvec; /* we need to send the footer, too! */ if (ret == 0) - goto done; + goto out; if (ret < 0) { dout("try_write write_partial_msg_pages err %d\n", ret); - goto done; + goto out; } } @@ -1793,10 +1795,9 @@ do_next: /* Nothing to do! */ clear_bit(WRITE_PENDING, &con->state); dout("try_write nothing else to write.\n"); -done: ret = 0; out: - dout("try_write done on %p\n", con); + dout("try_write done on %p ret %d\n", con, ret); return ret; } -- cgit v1.2.3-18-g5258 From fd76804f3f5484b35e6a51214c91e916ebba05aa Mon Sep 17 00:00:00 2001 From: Hans-Christian Egtvedt Date: Mon, 24 Jan 2011 16:09:56 +0100 Subject: ALSA: fix invalid hardware.h include in ac97c for AVR32 architecture This patch fixes the non-compiling AC97C driver for AVR32 architecture by include mach/hardware.h only for AT91 architecture. The AVR32 architecture does not supply the hardware.h include file. Signed-off-by: Hans-Christian Egtvedt CC: stable@kernel.org Signed-off-by: Takashi Iwai --- sound/atmel/ac97c.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/sound/atmel/ac97c.c b/sound/atmel/ac97c.c index 10c3a871a12..b310702c646 100644 --- a/sound/atmel/ac97c.c +++ b/sound/atmel/ac97c.c @@ -33,9 +33,12 @@ #include #include -#include #include +#ifdef CONFIG_ARCH_AT91 +#include +#endif + #include "ac97c.h" enum { -- cgit v1.2.3-18-g5258 From a20f0bc10c47fcf62be027e1a50b62791052ab56 Mon Sep 17 00:00:00 2001 From: Kalhan Trisal Date: Tue, 25 Jan 2011 14:24:37 +0000 Subject: hwmon: (lis3) turn down the no IRQ message Turn down the no IRQ message - on some platforms that's a normal state of affairs. Signed-off-by: Kalhan Trisal Signed-off-by: Alan Cox Acked-by: Eric Piel Signed-off-by: Guenter Roeck --- drivers/hwmon/lis3lv02d.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c index 1b674b7d458..d805e8e5796 100644 --- a/drivers/hwmon/lis3lv02d.c +++ b/drivers/hwmon/lis3lv02d.c @@ -957,7 +957,7 @@ int lis3lv02d_init_device(struct lis3lv02d *dev) /* bail if we did not get an IRQ from the bus layer */ if (!dev->irq) { - pr_err("No IRQ. Disabling /dev/freefall\n"); + pr_debug("No IRQ. Disabling /dev/freefall\n"); goto out; } -- cgit v1.2.3-18-g5258 From d757534ed15387202e322854cd72dc58bbb975de Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Tue, 25 Jan 2011 19:44:26 +0100 Subject: ALSA: HDA: Fix dmesg output of HDMI supported bits This typo caused the dmesg output of the supported bits of HDMI to be cut off early. Cc: stable@kernel.org Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_eld.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_eld.c b/sound/pci/hda/hda_eld.c index 4a663471dad..74b0560289c 100644 --- a/sound/pci/hda/hda_eld.c +++ b/sound/pci/hda/hda_eld.c @@ -381,7 +381,7 @@ static void hdmi_show_short_audio_desc(struct cea_sad *a) snd_print_pcm_rates(a->rates, buf, sizeof(buf)); if (a->format == AUDIO_CODING_TYPE_LPCM) - snd_print_pcm_bits(a->sample_bits, buf2 + 8, sizeof(buf2 - 8)); + snd_print_pcm_bits(a->sample_bits, buf2 + 8, sizeof(buf2) - 8); else if (a->max_bitrate) snprintf(buf2, sizeof(buf2), ", max bitrate = %d", a->max_bitrate); -- cgit v1.2.3-18-g5258 From d121a5d2a098ba6dd033dd195f5ccbf7558c37b6 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 25 Jan 2011 15:00:01 +0000 Subject: drm/i915/sdvo: If at first we don't succeed in reading the response, wait We were not pausing after detecting the response was pending and so did not allow the hardware sufficient time to complete before aborting. This lead to transient failures whilst probing SDVO devices. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30235 Reported-by: Knut Petersen Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/intel_sdvo.c | 46 +++++++++++++++++++-------------------- 1 file changed, 23 insertions(+), 23 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 45cd37652a3..6a09c1413d6 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -473,20 +473,6 @@ static bool intel_sdvo_write_cmd(struct intel_sdvo *intel_sdvo, u8 cmd, return false; } - i = 3; - while (status == SDVO_CMD_STATUS_PENDING && i--) { - if (!intel_sdvo_read_byte(intel_sdvo, - SDVO_I2C_CMD_STATUS, - &status)) - return false; - } - if (status != SDVO_CMD_STATUS_SUCCESS) { - DRM_DEBUG_KMS("command returns response %s [%d]\n", - status <= SDVO_CMD_STATUS_SCALING_NOT_SUPP ? cmd_status_names[status] : "???", - status); - return false; - } - return true; } @@ -497,6 +483,8 @@ static bool intel_sdvo_read_response(struct intel_sdvo *intel_sdvo, u8 status; int i; + DRM_DEBUG_KMS("%s: R: ", SDVO_NAME(intel_sdvo)); + /* * The documentation states that all commands will be * processed within 15µs, and that we need only poll @@ -505,14 +493,19 @@ static bool intel_sdvo_read_response(struct intel_sdvo *intel_sdvo, * * Check 5 times in case the hardware failed to read the docs. */ - do { + if (!intel_sdvo_read_byte(intel_sdvo, + SDVO_I2C_CMD_STATUS, + &status)) + goto log_fail; + + while (status == SDVO_CMD_STATUS_PENDING && retry--) { + udelay(15); if (!intel_sdvo_read_byte(intel_sdvo, SDVO_I2C_CMD_STATUS, &status)) - return false; - } while (status == SDVO_CMD_STATUS_PENDING && --retry); + goto log_fail; + } - DRM_DEBUG_KMS("%s: R: ", SDVO_NAME(intel_sdvo)); if (status <= SDVO_CMD_STATUS_SCALING_NOT_SUPP) DRM_LOG_KMS("(%s)", cmd_status_names[status]); else @@ -533,7 +526,7 @@ static bool intel_sdvo_read_response(struct intel_sdvo *intel_sdvo, return true; log_fail: - DRM_LOG_KMS("\n"); + DRM_LOG_KMS("... failed\n"); return false; } @@ -550,6 +543,7 @@ static int intel_sdvo_get_pixel_multiplier(struct drm_display_mode *mode) static bool intel_sdvo_set_control_bus_switch(struct intel_sdvo *intel_sdvo, u8 ddc_bus) { + /* This must be the immediately preceding write before the i2c xfer */ return intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_CONTROL_BUS_SWITCH, &ddc_bus, 1); @@ -557,7 +551,10 @@ static bool intel_sdvo_set_control_bus_switch(struct intel_sdvo *intel_sdvo, static bool intel_sdvo_set_value(struct intel_sdvo *intel_sdvo, u8 cmd, const void *data, int len) { - return intel_sdvo_write_cmd(intel_sdvo, cmd, data, len); + if (!intel_sdvo_write_cmd(intel_sdvo, cmd, data, len)) + return false; + + return intel_sdvo_read_response(intel_sdvo, NULL, 0); } static bool @@ -859,18 +856,21 @@ static bool intel_sdvo_set_avi_infoframe(struct intel_sdvo *intel_sdvo) intel_dip_infoframe_csum(&avi_if); - if (!intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_HBUF_INDEX, + if (!intel_sdvo_set_value(intel_sdvo, + SDVO_CMD_SET_HBUF_INDEX, set_buf_index, 2)) return false; for (i = 0; i < sizeof(avi_if); i += 8) { - if (!intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_HBUF_DATA, + if (!intel_sdvo_set_value(intel_sdvo, + SDVO_CMD_SET_HBUF_DATA, data, 8)) return false; data++; } - return intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_HBUF_TXRATE, + return intel_sdvo_set_value(intel_sdvo, + SDVO_CMD_SET_HBUF_TXRATE, &tx_rate, 1); } -- cgit v1.2.3-18-g5258 From eb03355660b44cf6b1ed2f895085b9de8f74efbc Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 24 Jan 2011 15:11:08 +0000 Subject: drm: Add an interface to reset the device Iterate over the attached CRTCs, encoders and connectors and call the supplied reset vfunc in order to reset any cached state back to unknown. Useful after an invalidation event such as a GPU reset or resuming. Tested-by: Takashi Iwai Signed-off-by: Chris Wilson --- drivers/gpu/drm/drm_crtc.c | 20 ++++++++++++++++++++ include/drm/drm_crtc.h | 7 +++++++ 2 files changed, 27 insertions(+) diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 2baa6708e44..654faa803dc 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -2674,3 +2674,23 @@ out: mutex_unlock(&dev->mode_config.mutex); return ret; } + +void drm_mode_config_reset(struct drm_device *dev) +{ + struct drm_crtc *crtc; + struct drm_encoder *encoder; + struct drm_connector *connector; + + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) + if (crtc->funcs->reset) + crtc->funcs->reset(crtc); + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) + if (encoder->funcs->reset) + encoder->funcs->reset(encoder); + + list_for_each_entry(connector, &dev->mode_config.connector_list, head) + if (connector->funcs->reset) + connector->funcs->reset(connector); +} +EXPORT_SYMBOL(drm_mode_config_reset); diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index acd7fade160..801be59f4f1 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -275,6 +275,7 @@ struct drm_pending_vblank_event; /** * drm_crtc_funcs - control CRTCs for a given device + * @reset: reset CRTC after state has been invalidate (e.g. resume) * @dpms: control display power levels * @save: save CRTC state * @resore: restore CRTC state @@ -302,6 +303,8 @@ struct drm_crtc_funcs { void (*save)(struct drm_crtc *crtc); /* suspend? */ /* Restore CRTC state */ void (*restore)(struct drm_crtc *crtc); /* resume? */ + /* Reset CRTC state */ + void (*reset)(struct drm_crtc *crtc); /* cursor controls */ int (*cursor_set)(struct drm_crtc *crtc, struct drm_file *file_priv, @@ -379,6 +382,7 @@ struct drm_crtc { * @dpms: set power state (see drm_crtc_funcs above) * @save: save connector state * @restore: restore connector state + * @reset: reset connector after state has been invalidate (e.g. resume) * @mode_valid: is this mode valid on the given connector? * @mode_fixup: try to fixup proposed mode for this connector * @mode_set: set this mode @@ -396,6 +400,7 @@ struct drm_connector_funcs { void (*dpms)(struct drm_connector *connector, int mode); void (*save)(struct drm_connector *connector); void (*restore)(struct drm_connector *connector); + void (*reset)(struct drm_connector *connector); /* Check to see if anything is attached to the connector. * @force is set to false whilst polling, true when checking the @@ -413,6 +418,7 @@ struct drm_connector_funcs { }; struct drm_encoder_funcs { + void (*reset)(struct drm_encoder *encoder); void (*destroy)(struct drm_encoder *encoder); }; @@ -656,6 +662,7 @@ extern struct drm_display_mode *drm_mode_duplicate(struct drm_device *dev, struct drm_display_mode *mode); extern void drm_mode_debug_printmodeline(struct drm_display_mode *mode); extern void drm_mode_config_init(struct drm_device *dev); +extern void drm_mode_config_reset(struct drm_device *dev); extern void drm_mode_config_cleanup(struct drm_device *dev); extern void drm_mode_set_name(struct drm_display_mode *mode); extern bool drm_mode_equal(struct drm_display_mode *mode1, struct drm_display_mode *mode2); -- cgit v1.2.3-18-g5258 From 500f7147cf5bafd139056d521536b10c2bc2e154 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 24 Jan 2011 15:14:41 +0000 Subject: drm/i915: Reset state after a GPU reset or resume Call drm_mode_config_reset() after an invalidation event to restore any cached state to unknown. Tested-by: Takashi Iwai Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/i915_drv.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 66796bb82d3..e517447b088 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -354,6 +354,7 @@ static int i915_drm_thaw(struct drm_device *dev) error = i915_gem_init_ringbuffer(dev); mutex_unlock(&dev->struct_mutex); + drm_mode_config_reset(dev); drm_irq_install(dev); /* Resume the modeset for every activated CRTC */ @@ -542,6 +543,7 @@ int i915_reset(struct drm_device *dev, u8 flags) mutex_unlock(&dev->struct_mutex); drm_irq_uninstall(dev); + drm_mode_config_reset(dev); drm_irq_install(dev); mutex_lock(&dev->struct_mutex); } -- cgit v1.2.3-18-g5258 From f3269058e7a80083dcdf89698bfcd1a6c6f8fd12 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 24 Jan 2011 15:17:08 +0000 Subject: drm/i915/crt: Force the initial probe after reset Upon resume, like after a cold boot, we need to forcibly probe the analog connector and cannot rely on the hotplug status. Based on a patch by Takashi Iwai. Reported-by: Stefan Dirsch Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=26952 Tested-by: Takashi Iwai Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/intel_crt.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index 17035b87ee4..8a77ff4a723 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -535,6 +535,15 @@ static int intel_crt_set_property(struct drm_connector *connector, return 0; } +static void intel_crt_reset(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct intel_crt *crt = intel_attached_crt(connector); + + if (HAS_PCH_SPLIT(dev)) + crt->force_hotplug_required = 1; +} + /* * Routines for controlling stuff on the analog port */ @@ -548,6 +557,7 @@ static const struct drm_encoder_helper_funcs intel_crt_helper_funcs = { }; static const struct drm_connector_funcs intel_crt_connector_funcs = { + .reset = intel_crt_reset, .dpms = drm_helper_connector_dpms, .detect = intel_crt_detect, .fill_modes = drm_helper_probe_single_connector_modes, -- cgit v1.2.3-18-g5258 From 5d1d0cc87fc0887921993ea0742932e0c8adeda0 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 24 Jan 2011 15:02:15 +0000 Subject: drm/i915: Reset crtc after resume Based on a patch by Takashi Iwai. Reported-by: Matthias Hopf Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=27272 Tested-by: Takashi Iwai Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/intel_display.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index d7f237deaaf..7e42aa58650 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -5551,6 +5551,18 @@ cleanup_work: return ret; } +static void intel_crtc_reset(struct drm_crtc *crtc) +{ + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + + /* Reset flags back to the 'unknown' status so that they + * will be correctly set on the initial modeset. + */ + intel_crtc->cursor_addr = 0; + intel_crtc->dpms_mode = -1; + intel_crtc->active = true; /* force the pipe off on setup_init_config */ +} + static struct drm_crtc_helper_funcs intel_helper_funcs = { .dpms = intel_crtc_dpms, .mode_fixup = intel_crtc_mode_fixup, @@ -5562,6 +5574,7 @@ static struct drm_crtc_helper_funcs intel_helper_funcs = { }; static const struct drm_crtc_funcs intel_crtc_funcs = { + .reset = intel_crtc_reset, .cursor_set = intel_crtc_cursor_set, .cursor_move = intel_crtc_cursor_move, .gamma_set = intel_crtc_gamma_set, @@ -5652,9 +5665,7 @@ static void intel_crtc_init(struct drm_device *dev, int pipe) dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base; dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base; - intel_crtc->cursor_addr = 0; - intel_crtc->dpms_mode = -1; - intel_crtc->active = true; /* force the pipe off on setup_init_config */ + intel_crtc_reset(&intel_crtc->base); if (HAS_PCH_SPLIT(dev)) { intel_helper_funcs.prepare = ironlake_crtc_prepare; -- cgit v1.2.3-18-g5258 From 93c100c0b423266c0ee28497e90fdf27c05e6b8e Mon Sep 17 00:00:00 2001 From: Steve French Date: Tue, 25 Jan 2011 19:28:43 +0000 Subject: [CIFS] Replace cifs md5 hashing functions with kernel crypto APIs Replace remaining use of md5 hash functions local to cifs module with kernel crypto APIs. Remove header and source file containing those local functions. Signed-off-by: Shirish Pargaonkar Reviewed-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/Makefile | 2 +- fs/cifs/cifsencrypt.c | 1 - fs/cifs/link.c | 59 ++++++-- fs/cifs/md5.c | 366 -------------------------------------------------- fs/cifs/md5.h | 38 ------ fs/cifs/smbencrypt.c | 1 - 6 files changed, 51 insertions(+), 416 deletions(-) delete mode 100644 fs/cifs/md5.c delete mode 100644 fs/cifs/md5.h diff --git a/fs/cifs/Makefile b/fs/cifs/Makefile index 43b19dd3919..e1322296cb6 100644 --- a/fs/cifs/Makefile +++ b/fs/cifs/Makefile @@ -5,7 +5,7 @@ obj-$(CONFIG_CIFS) += cifs.o cifs-y := cifsfs.o cifssmb.o cifs_debug.o connect.o dir.o file.o inode.o \ link.o misc.o netmisc.o smbdes.o smbencrypt.o transport.o asn1.o \ - md4.o md5.o cifs_unicode.o nterr.o xattr.o cifsencrypt.o \ + md4.o cifs_unicode.o nterr.o xattr.o cifsencrypt.o \ readdir.o ioctl.o sess.o export.o cifs-$(CONFIG_CIFS_ACL) += cifsacl.o diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c index 66f3d50d067..35bf329c90e 100644 --- a/fs/cifs/cifsencrypt.c +++ b/fs/cifs/cifsencrypt.c @@ -24,7 +24,6 @@ #include "cifspdu.h" #include "cifsglob.h" #include "cifs_debug.h" -#include "md5.h" #include "cifs_unicode.h" #include "cifsproto.h" #include "ntlmssp.h" diff --git a/fs/cifs/link.c b/fs/cifs/link.c index 306769de2fb..d3444ea6ac7 100644 --- a/fs/cifs/link.c +++ b/fs/cifs/link.c @@ -28,7 +28,6 @@ #include "cifsproto.h" #include "cifs_debug.h" #include "cifs_fs_sb.h" -#include "md5.h" #define CIFS_MF_SYMLINK_LEN_OFFSET (4+1) #define CIFS_MF_SYMLINK_MD5_OFFSET (CIFS_MF_SYMLINK_LEN_OFFSET+(4+1)) @@ -46,6 +45,45 @@ md5_hash[8], md5_hash[9], md5_hash[10], md5_hash[11],\ md5_hash[12], md5_hash[13], md5_hash[14], md5_hash[15] +static int +symlink_hash(unsigned int link_len, const char *link_str, u8 *md5_hash) +{ + int rc; + unsigned int size; + struct crypto_shash *md5; + struct sdesc *sdescmd5; + + md5 = crypto_alloc_shash("md5", 0, 0); + if (!md5 || IS_ERR(md5)) { + rc = PTR_ERR(md5); + cERROR(1, "%s: Crypto md5 allocation error %d\n", __func__, rc); + return rc; + } + size = sizeof(struct shash_desc) + crypto_shash_descsize(md5); + sdescmd5 = kmalloc(size, GFP_KERNEL); + if (!sdescmd5) { + rc = -ENOMEM; + cERROR(1, "%s: Memory allocation failure\n", __func__); + goto symlink_hash_err; + } + sdescmd5->shash.tfm = md5; + sdescmd5->shash.flags = 0x0; + + rc = crypto_shash_init(&sdescmd5->shash); + if (rc) { + cERROR(1, "%s: Could not init md5 shash\n", __func__); + goto symlink_hash_err; + } + crypto_shash_update(&sdescmd5->shash, link_str, link_len); + rc = crypto_shash_final(&sdescmd5->shash, md5_hash); + +symlink_hash_err: + crypto_free_shash(md5); + kfree(sdescmd5); + + return rc; +} + static int CIFSParseMFSymlink(const u8 *buf, unsigned int buf_len, @@ -56,7 +94,6 @@ CIFSParseMFSymlink(const u8 *buf, unsigned int link_len; const char *md5_str1; const char *link_str; - struct MD5Context md5_ctx; u8 md5_hash[16]; char md5_str2[34]; @@ -70,9 +107,11 @@ CIFSParseMFSymlink(const u8 *buf, if (rc != 1) return -EINVAL; - cifs_MD5_init(&md5_ctx); - cifs_MD5_update(&md5_ctx, (const u8 *)link_str, link_len); - cifs_MD5_final(md5_hash, &md5_ctx); + rc = symlink_hash(link_len, link_str, md5_hash); + if (rc) { + cFYI(1, "%s: MD5 hash failure: %d\n", __func__, rc); + return rc; + } snprintf(md5_str2, sizeof(md5_str2), CIFS_MF_SYMLINK_MD5_FORMAT, @@ -94,9 +133,9 @@ CIFSParseMFSymlink(const u8 *buf, static int CIFSFormatMFSymlink(u8 *buf, unsigned int buf_len, const char *link_str) { + int rc; unsigned int link_len; unsigned int ofs; - struct MD5Context md5_ctx; u8 md5_hash[16]; if (buf_len != CIFS_MF_SYMLINK_FILE_SIZE) @@ -107,9 +146,11 @@ CIFSFormatMFSymlink(u8 *buf, unsigned int buf_len, const char *link_str) if (link_len > CIFS_MF_SYMLINK_LINK_MAXLEN) return -ENAMETOOLONG; - cifs_MD5_init(&md5_ctx); - cifs_MD5_update(&md5_ctx, (const u8 *)link_str, link_len); - cifs_MD5_final(md5_hash, &md5_ctx); + rc = symlink_hash(link_len, link_str, md5_hash); + if (rc) { + cFYI(1, "%s: MD5 hash failure: %d\n", __func__, rc); + return rc; + } snprintf(buf, buf_len, CIFS_MF_SYMLINK_LEN_FORMAT CIFS_MF_SYMLINK_MD5_FORMAT, diff --git a/fs/cifs/md5.c b/fs/cifs/md5.c deleted file mode 100644 index 98b66a54c31..00000000000 --- a/fs/cifs/md5.c +++ /dev/null @@ -1,366 +0,0 @@ -/* - * This code implements the MD5 message-digest algorithm. - * The algorithm is due to Ron Rivest. This code was - * written by Colin Plumb in 1993, no copyright is claimed. - * This code is in the public domain; do with it what you wish. - * - * Equivalent code is available from RSA Data Security, Inc. - * This code has been tested against that, and is equivalent, - * except that you don't need to include two pages of legalese - * with every copy. - * - * To compute the message digest of a chunk of bytes, declare an - * MD5Context structure, pass it to cifs_MD5_init, call cifs_MD5_update as - * needed on buffers full of bytes, and then call cifs_MD5_final, which - * will fill a supplied 16-byte array with the digest. - */ - -/* This code slightly modified to fit into Samba by - abartlet@samba.org Jun 2001 - and to fit the cifs vfs by - Steve French sfrench@us.ibm.com */ - -#include -#include "md5.h" - -static void MD5Transform(__u32 buf[4], __u32 const in[16]); - -/* - * Note: this code is harmless on little-endian machines. - */ -static void -byteReverse(unsigned char *buf, unsigned longs) -{ - __u32 t; - do { - t = (__u32) ((unsigned) buf[3] << 8 | buf[2]) << 16 | - ((unsigned) buf[1] << 8 | buf[0]); - *(__u32 *) buf = t; - buf += 4; - } while (--longs); -} - -/* - * Start MD5 accumulation. Set bit count to 0 and buffer to mysterious - * initialization constants. - */ -void -cifs_MD5_init(struct MD5Context *ctx) -{ - ctx->buf[0] = 0x67452301; - ctx->buf[1] = 0xefcdab89; - ctx->buf[2] = 0x98badcfe; - ctx->buf[3] = 0x10325476; - - ctx->bits[0] = 0; - ctx->bits[1] = 0; -} - -/* - * Update context to reflect the concatenation of another buffer full - * of bytes. - */ -void -cifs_MD5_update(struct MD5Context *ctx, unsigned char const *buf, unsigned len) -{ - register __u32 t; - - /* Update bitcount */ - - t = ctx->bits[0]; - if ((ctx->bits[0] = t + ((__u32) len << 3)) < t) - ctx->bits[1]++; /* Carry from low to high */ - ctx->bits[1] += len >> 29; - - t = (t >> 3) & 0x3f; /* Bytes already in shsInfo->data */ - - /* Handle any leading odd-sized chunks */ - - if (t) { - unsigned char *p = (unsigned char *) ctx->in + t; - - t = 64 - t; - if (len < t) { - memmove(p, buf, len); - return; - } - memmove(p, buf, t); - byteReverse(ctx->in, 16); - MD5Transform(ctx->buf, (__u32 *) ctx->in); - buf += t; - len -= t; - } - /* Process data in 64-byte chunks */ - - while (len >= 64) { - memmove(ctx->in, buf, 64); - byteReverse(ctx->in, 16); - MD5Transform(ctx->buf, (__u32 *) ctx->in); - buf += 64; - len -= 64; - } - - /* Handle any remaining bytes of data. */ - - memmove(ctx->in, buf, len); -} - -/* - * Final wrapup - pad to 64-byte boundary with the bit pattern - * 1 0* (64-bit count of bits processed, MSB-first) - */ -void -cifs_MD5_final(unsigned char digest[16], struct MD5Context *ctx) -{ - unsigned int count; - unsigned char *p; - - /* Compute number of bytes mod 64 */ - count = (ctx->bits[0] >> 3) & 0x3F; - - /* Set the first char of padding to 0x80. This is safe since there is - always at least one byte free */ - p = ctx->in + count; - *p++ = 0x80; - - /* Bytes of padding needed to make 64 bytes */ - count = 64 - 1 - count; - - /* Pad out to 56 mod 64 */ - if (count < 8) { - /* Two lots of padding: Pad the first block to 64 bytes */ - memset(p, 0, count); - byteReverse(ctx->in, 16); - MD5Transform(ctx->buf, (__u32 *) ctx->in); - - /* Now fill the next block with 56 bytes */ - memset(ctx->in, 0, 56); - } else { - /* Pad block to 56 bytes */ - memset(p, 0, count - 8); - } - byteReverse(ctx->in, 14); - - /* Append length in bits and transform */ - ((__u32 *) ctx->in)[14] = ctx->bits[0]; - ((__u32 *) ctx->in)[15] = ctx->bits[1]; - - MD5Transform(ctx->buf, (__u32 *) ctx->in); - byteReverse((unsigned char *) ctx->buf, 4); - memmove(digest, ctx->buf, 16); - memset(ctx, 0, sizeof(*ctx)); /* In case it's sensitive */ -} - -/* The four core functions - F1 is optimized somewhat */ - -/* #define F1(x, y, z) (x & y | ~x & z) */ -#define F1(x, y, z) (z ^ (x & (y ^ z))) -#define F2(x, y, z) F1(z, x, y) -#define F3(x, y, z) (x ^ y ^ z) -#define F4(x, y, z) (y ^ (x | ~z)) - -/* This is the central step in the MD5 algorithm. */ -#define MD5STEP(f, w, x, y, z, data, s) \ - (w += f(x, y, z) + data, w = w<>(32-s), w += x) - -/* - * The core of the MD5 algorithm, this alters an existing MD5 hash to - * reflect the addition of 16 longwords of new data. cifs_MD5_update blocks - * the data and converts bytes into longwords for this routine. - */ -static void -MD5Transform(__u32 buf[4], __u32 const in[16]) -{ - register __u32 a, b, c, d; - - a = buf[0]; - b = buf[1]; - c = buf[2]; - d = buf[3]; - - MD5STEP(F1, a, b, c, d, in[0] + 0xd76aa478, 7); - MD5STEP(F1, d, a, b, c, in[1] + 0xe8c7b756, 12); - MD5STEP(F1, c, d, a, b, in[2] + 0x242070db, 17); - MD5STEP(F1, b, c, d, a, in[3] + 0xc1bdceee, 22); - MD5STEP(F1, a, b, c, d, in[4] + 0xf57c0faf, 7); - MD5STEP(F1, d, a, b, c, in[5] + 0x4787c62a, 12); - MD5STEP(F1, c, d, a, b, in[6] + 0xa8304613, 17); - MD5STEP(F1, b, c, d, a, in[7] + 0xfd469501, 22); - MD5STEP(F1, a, b, c, d, in[8] + 0x698098d8, 7); - MD5STEP(F1, d, a, b, c, in[9] + 0x8b44f7af, 12); - MD5STEP(F1, c, d, a, b, in[10] + 0xffff5bb1, 17); - MD5STEP(F1, b, c, d, a, in[11] + 0x895cd7be, 22); - MD5STEP(F1, a, b, c, d, in[12] + 0x6b901122, 7); - MD5STEP(F1, d, a, b, c, in[13] + 0xfd987193, 12); - MD5STEP(F1, c, d, a, b, in[14] + 0xa679438e, 17); - MD5STEP(F1, b, c, d, a, in[15] + 0x49b40821, 22); - - MD5STEP(F2, a, b, c, d, in[1] + 0xf61e2562, 5); - MD5STEP(F2, d, a, b, c, in[6] + 0xc040b340, 9); - MD5STEP(F2, c, d, a, b, in[11] + 0x265e5a51, 14); - MD5STEP(F2, b, c, d, a, in[0] + 0xe9b6c7aa, 20); - MD5STEP(F2, a, b, c, d, in[5] + 0xd62f105d, 5); - MD5STEP(F2, d, a, b, c, in[10] + 0x02441453, 9); - MD5STEP(F2, c, d, a, b, in[15] + 0xd8a1e681, 14); - MD5STEP(F2, b, c, d, a, in[4] + 0xe7d3fbc8, 20); - MD5STEP(F2, a, b, c, d, in[9] + 0x21e1cde6, 5); - MD5STEP(F2, d, a, b, c, in[14] + 0xc33707d6, 9); - MD5STEP(F2, c, d, a, b, in[3] + 0xf4d50d87, 14); - MD5STEP(F2, b, c, d, a, in[8] + 0x455a14ed, 20); - MD5STEP(F2, a, b, c, d, in[13] + 0xa9e3e905, 5); - MD5STEP(F2, d, a, b, c, in[2] + 0xfcefa3f8, 9); - MD5STEP(F2, c, d, a, b, in[7] + 0x676f02d9, 14); - MD5STEP(F2, b, c, d, a, in[12] + 0x8d2a4c8a, 20); - - MD5STEP(F3, a, b, c, d, in[5] + 0xfffa3942, 4); - MD5STEP(F3, d, a, b, c, in[8] + 0x8771f681, 11); - MD5STEP(F3, c, d, a, b, in[11] + 0x6d9d6122, 16); - MD5STEP(F3, b, c, d, a, in[14] + 0xfde5380c, 23); - MD5STEP(F3, a, b, c, d, in[1] + 0xa4beea44, 4); - MD5STEP(F3, d, a, b, c, in[4] + 0x4bdecfa9, 11); - MD5STEP(F3, c, d, a, b, in[7] + 0xf6bb4b60, 16); - MD5STEP(F3, b, c, d, a, in[10] + 0xbebfbc70, 23); - MD5STEP(F3, a, b, c, d, in[13] + 0x289b7ec6, 4); - MD5STEP(F3, d, a, b, c, in[0] + 0xeaa127fa, 11); - MD5STEP(F3, c, d, a, b, in[3] + 0xd4ef3085, 16); - MD5STEP(F3, b, c, d, a, in[6] + 0x04881d05, 23); - MD5STEP(F3, a, b, c, d, in[9] + 0xd9d4d039, 4); - MD5STEP(F3, d, a, b, c, in[12] + 0xe6db99e5, 11); - MD5STEP(F3, c, d, a, b, in[15] + 0x1fa27cf8, 16); - MD5STEP(F3, b, c, d, a, in[2] + 0xc4ac5665, 23); - - MD5STEP(F4, a, b, c, d, in[0] + 0xf4292244, 6); - MD5STEP(F4, d, a, b, c, in[7] + 0x432aff97, 10); - MD5STEP(F4, c, d, a, b, in[14] + 0xab9423a7, 15); - MD5STEP(F4, b, c, d, a, in[5] + 0xfc93a039, 21); - MD5STEP(F4, a, b, c, d, in[12] + 0x655b59c3, 6); - MD5STEP(F4, d, a, b, c, in[3] + 0x8f0ccc92, 10); - MD5STEP(F4, c, d, a, b, in[10] + 0xffeff47d, 15); - MD5STEP(F4, b, c, d, a, in[1] + 0x85845dd1, 21); - MD5STEP(F4, a, b, c, d, in[8] + 0x6fa87e4f, 6); - MD5STEP(F4, d, a, b, c, in[15] + 0xfe2ce6e0, 10); - MD5STEP(F4, c, d, a, b, in[6] + 0xa3014314, 15); - MD5STEP(F4, b, c, d, a, in[13] + 0x4e0811a1, 21); - MD5STEP(F4, a, b, c, d, in[4] + 0xf7537e82, 6); - MD5STEP(F4, d, a, b, c, in[11] + 0xbd3af235, 10); - MD5STEP(F4, c, d, a, b, in[2] + 0x2ad7d2bb, 15); - MD5STEP(F4, b, c, d, a, in[9] + 0xeb86d391, 21); - - buf[0] += a; - buf[1] += b; - buf[2] += c; - buf[3] += d; -} - -#if 0 /* currently unused */ -/*********************************************************************** - the rfc 2104 version of hmac_md5 initialisation. -***********************************************************************/ -static void -hmac_md5_init_rfc2104(unsigned char *key, int key_len, - struct HMACMD5Context *ctx) -{ - int i; - - /* if key is longer than 64 bytes reset it to key=MD5(key) */ - if (key_len > 64) { - unsigned char tk[16]; - struct MD5Context tctx; - - cifs_MD5_init(&tctx); - cifs_MD5_update(&tctx, key, key_len); - cifs_MD5_final(tk, &tctx); - - key = tk; - key_len = 16; - } - - /* start out by storing key in pads */ - memset(ctx->k_ipad, 0, sizeof(ctx->k_ipad)); - memset(ctx->k_opad, 0, sizeof(ctx->k_opad)); - memcpy(ctx->k_ipad, key, key_len); - memcpy(ctx->k_opad, key, key_len); - - /* XOR key with ipad and opad values */ - for (i = 0; i < 64; i++) { - ctx->k_ipad[i] ^= 0x36; - ctx->k_opad[i] ^= 0x5c; - } - - cifs_MD5_init(&ctx->ctx); - cifs_MD5_update(&ctx->ctx, ctx->k_ipad, 64); -} -#endif - -/*********************************************************************** - the microsoft version of hmac_md5 initialisation. -***********************************************************************/ -void -hmac_md5_init_limK_to_64(const unsigned char *key, int key_len, - struct HMACMD5Context *ctx) -{ - int i; - - /* if key is longer than 64 bytes truncate it */ - if (key_len > 64) - key_len = 64; - - /* start out by storing key in pads */ - memset(ctx->k_ipad, 0, sizeof(ctx->k_ipad)); - memset(ctx->k_opad, 0, sizeof(ctx->k_opad)); - memcpy(ctx->k_ipad, key, key_len); - memcpy(ctx->k_opad, key, key_len); - - /* XOR key with ipad and opad values */ - for (i = 0; i < 64; i++) { - ctx->k_ipad[i] ^= 0x36; - ctx->k_opad[i] ^= 0x5c; - } - - cifs_MD5_init(&ctx->ctx); - cifs_MD5_update(&ctx->ctx, ctx->k_ipad, 64); -} - -/*********************************************************************** - update hmac_md5 "inner" buffer -***********************************************************************/ -void -hmac_md5_update(const unsigned char *text, int text_len, - struct HMACMD5Context *ctx) -{ - cifs_MD5_update(&ctx->ctx, text, text_len); /* then text of datagram */ -} - -/*********************************************************************** - finish off hmac_md5 "inner" buffer and generate outer one. -***********************************************************************/ -void -hmac_md5_final(unsigned char *digest, struct HMACMD5Context *ctx) -{ - struct MD5Context ctx_o; - - cifs_MD5_final(digest, &ctx->ctx); - - cifs_MD5_init(&ctx_o); - cifs_MD5_update(&ctx_o, ctx->k_opad, 64); - cifs_MD5_update(&ctx_o, digest, 16); - cifs_MD5_final(digest, &ctx_o); -} - -/*********************************************************** - single function to calculate an HMAC MD5 digest from data. - use the microsoft hmacmd5 init method because the key is 16 bytes. -************************************************************/ -#if 0 /* currently unused */ -static void -hmac_md5(unsigned char key[16], unsigned char *data, int data_len, - unsigned char *digest) -{ - struct HMACMD5Context ctx; - hmac_md5_init_limK_to_64(key, 16, &ctx); - if (data_len != 0) - hmac_md5_update(data, data_len, &ctx); - - hmac_md5_final(digest, &ctx); -} -#endif diff --git a/fs/cifs/md5.h b/fs/cifs/md5.h deleted file mode 100644 index 6fba8cb402f..00000000000 --- a/fs/cifs/md5.h +++ /dev/null @@ -1,38 +0,0 @@ -#ifndef MD5_H -#define MD5_H -#ifndef HEADER_MD5_H -/* Try to avoid clashes with OpenSSL */ -#define HEADER_MD5_H -#endif - -struct MD5Context { - __u32 buf[4]; - __u32 bits[2]; - unsigned char in[64]; -}; -#endif /* !MD5_H */ - -#ifndef _HMAC_MD5_H -struct HMACMD5Context { - struct MD5Context ctx; - unsigned char k_ipad[65]; - unsigned char k_opad[65]; -}; -#endif /* _HMAC_MD5_H */ - -void cifs_MD5_init(struct MD5Context *context); -void cifs_MD5_update(struct MD5Context *context, unsigned char const *buf, - unsigned len); -void cifs_MD5_final(unsigned char digest[16], struct MD5Context *context); - -/* The following definitions come from lib/hmacmd5.c */ - -/* void hmac_md5_init_rfc2104(unsigned char *key, int key_len, - struct HMACMD5Context *ctx);*/ -void hmac_md5_init_limK_to_64(const unsigned char *key, int key_len, - struct HMACMD5Context *ctx); -void hmac_md5_update(const unsigned char *text, int text_len, - struct HMACMD5Context *ctx); -void hmac_md5_final(unsigned char *digest, struct HMACMD5Context *ctx); -/* void hmac_md5(unsigned char key[16], unsigned char *data, int data_len, - unsigned char *digest);*/ diff --git a/fs/cifs/smbencrypt.c b/fs/cifs/smbencrypt.c index 192ea51af20..30135005e4f 100644 --- a/fs/cifs/smbencrypt.c +++ b/fs/cifs/smbencrypt.c @@ -32,7 +32,6 @@ #include "cifs_unicode.h" #include "cifspdu.h" #include "cifsglob.h" -#include "md5.h" #include "cifs_debug.h" #include "cifsencrypt.h" -- cgit v1.2.3-18-g5258 From 72432ffcf555decbbae47f1be338e1d2f210aa69 Mon Sep 17 00:00:00 2001 From: Pavel Shilovsky Date: Mon, 24 Jan 2011 14:16:35 -0500 Subject: CIFS: Implement cifs_strict_writev (try #4) If we don't have Exclusive oplock we write a data to the server. Also set invalidate_mapping flag on the inode if we wrote something to the server. Add cifs_iovec_write to let the client write iovec buffers through CIFSSMBWrite2. Signed-off-by: Pavel Shilovsky Reviewed-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifsfs.c | 15 ++-- fs/cifs/cifsfs.h | 4 +- fs/cifs/cifsproto.h | 2 + fs/cifs/file.c | 202 +++++++++++++++++++++++++++++++++++++++++++++++++++- 4 files changed, 217 insertions(+), 6 deletions(-) diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index a8323f1dc1c..f2970136d17 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -600,10 +600,17 @@ static ssize_t cifs_file_aio_write(struct kiocb *iocb, const struct iovec *iov, { struct inode *inode = iocb->ki_filp->f_path.dentry->d_inode; ssize_t written; + int rc; written = generic_file_aio_write(iocb, iov, nr_segs, pos); - if (!CIFS_I(inode)->clientCanCacheAll) - filemap_fdatawrite(inode->i_mapping); + + if (CIFS_I(inode)->clientCanCacheAll) + return written; + + rc = filemap_fdatawrite(inode->i_mapping); + if (rc) + cFYI(1, "cifs_file_aio_write: %d rc on %p inode", rc, inode); + return written; } @@ -737,7 +744,7 @@ const struct file_operations cifs_file_strict_ops = { .read = do_sync_read, .write = do_sync_write, .aio_read = cifs_strict_readv, - .aio_write = cifs_file_aio_write, + .aio_write = cifs_strict_writev, .open = cifs_open, .release = cifs_close, .lock = cifs_lock, @@ -793,7 +800,7 @@ const struct file_operations cifs_file_strict_nobrl_ops = { .read = do_sync_read, .write = do_sync_write, .aio_read = cifs_strict_readv, - .aio_write = cifs_file_aio_write, + .aio_write = cifs_strict_writev, .open = cifs_open, .release = cifs_close, .fsync = cifs_strict_fsync, diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h index f23206d4653..14789a97304 100644 --- a/fs/cifs/cifsfs.h +++ b/fs/cifs/cifsfs.h @@ -85,7 +85,9 @@ extern ssize_t cifs_user_read(struct file *file, char __user *read_data, extern ssize_t cifs_strict_readv(struct kiocb *iocb, const struct iovec *iov, unsigned long nr_segs, loff_t pos); extern ssize_t cifs_user_write(struct file *file, const char __user *write_data, - size_t write_size, loff_t *poffset); + size_t write_size, loff_t *poffset); +extern ssize_t cifs_strict_writev(struct kiocb *iocb, const struct iovec *iov, + unsigned long nr_segs, loff_t pos); extern int cifs_lock(struct file *, int, struct file_lock *); extern int cifs_fsync(struct file *, int); extern int cifs_strict_fsync(struct file *, int); diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 982895fa761..35c989f4924 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -85,6 +85,8 @@ extern int checkSMB(struct smb_hdr *smb, __u16 mid, unsigned int length); extern bool is_valid_oplock_break(struct smb_hdr *smb, struct TCP_Server_Info *); extern bool is_size_safe_to_change(struct cifsInodeInfo *, __u64 eof); +extern void cifs_update_eof(struct cifsInodeInfo *cifsi, loff_t offset, + unsigned int bytes_written); extern struct cifsFileInfo *find_writable_file(struct cifsInodeInfo *, bool); extern struct cifsFileInfo *find_readable_file(struct cifsInodeInfo *, bool); extern unsigned int smbCalcSize(struct smb_hdr *ptr); diff --git a/fs/cifs/file.c b/fs/cifs/file.c index d7d65a70678..0de17c1db60 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -848,7 +848,7 @@ int cifs_lock(struct file *file, int cmd, struct file_lock *pfLock) } /* update the file size (if needed) after a write */ -static void +void cifs_update_eof(struct cifsInodeInfo *cifsi, loff_t offset, unsigned int bytes_written) { @@ -1619,6 +1619,206 @@ int cifs_flush(struct file *file, fl_owner_t id) return rc; } +static int +cifs_write_allocate_pages(struct page **pages, unsigned long num_pages) +{ + int rc = 0; + unsigned long i; + + for (i = 0; i < num_pages; i++) { + pages[i] = alloc_page(__GFP_HIGHMEM); + if (!pages[i]) { + /* + * save number of pages we have already allocated and + * return with ENOMEM error + */ + num_pages = i; + rc = -ENOMEM; + goto error; + } + } + + return rc; + +error: + for (i = 0; i < num_pages; i++) + put_page(pages[i]); + return rc; +} + +static inline +size_t get_numpages(const size_t wsize, const size_t len, size_t *cur_len) +{ + size_t num_pages; + size_t clen; + + clen = min_t(const size_t, len, wsize); + num_pages = clen / PAGE_CACHE_SIZE; + if (clen % PAGE_CACHE_SIZE) + num_pages++; + + if (cur_len) + *cur_len = clen; + + return num_pages; +} + +static ssize_t +cifs_iovec_write(struct file *file, const struct iovec *iov, + unsigned long nr_segs, loff_t *poffset) +{ + size_t total_written = 0, written = 0; + unsigned long num_pages, npages; + size_t copied, len, cur_len, i; + struct kvec *to_send; + struct page **pages; + struct iov_iter it; + struct inode *inode; + struct cifsFileInfo *open_file; + struct cifsTconInfo *pTcon; + struct cifs_sb_info *cifs_sb; + int xid, rc; + + len = iov_length(iov, nr_segs); + if (!len) + return 0; + + rc = generic_write_checks(file, poffset, &len, 0); + if (rc) + return rc; + + cifs_sb = CIFS_SB(file->f_path.dentry->d_sb); + num_pages = get_numpages(cifs_sb->wsize, len, &cur_len); + + pages = kmalloc(sizeof(struct pages *)*num_pages, GFP_KERNEL); + if (!pages) + return -ENOMEM; + + to_send = kmalloc(sizeof(struct kvec)*(num_pages + 1), GFP_KERNEL); + if (!to_send) { + kfree(pages); + return -ENOMEM; + } + + rc = cifs_write_allocate_pages(pages, num_pages); + if (rc) { + kfree(pages); + kfree(to_send); + return rc; + } + + xid = GetXid(); + open_file = file->private_data; + pTcon = tlink_tcon(open_file->tlink); + inode = file->f_path.dentry->d_inode; + + iov_iter_init(&it, iov, nr_segs, len, 0); + npages = num_pages; + + do { + size_t save_len = cur_len; + for (i = 0; i < npages; i++) { + copied = min_t(const size_t, cur_len, PAGE_CACHE_SIZE); + copied = iov_iter_copy_from_user(pages[i], &it, 0, + copied); + cur_len -= copied; + iov_iter_advance(&it, copied); + to_send[i+1].iov_base = kmap(pages[i]); + to_send[i+1].iov_len = copied; + } + + cur_len = save_len - cur_len; + + do { + if (open_file->invalidHandle) { + rc = cifs_reopen_file(open_file, false); + if (rc != 0) + break; + } + rc = CIFSSMBWrite2(xid, pTcon, open_file->netfid, + cur_len, *poffset, &written, + to_send, npages, 0); + } while (rc == -EAGAIN); + + for (i = 0; i < npages; i++) + kunmap(pages[i]); + + if (written) { + len -= written; + total_written += written; + cifs_update_eof(CIFS_I(inode), *poffset, written); + *poffset += written; + } else if (rc < 0) { + if (!total_written) + total_written = rc; + break; + } + + /* get length and number of kvecs of the next write */ + npages = get_numpages(cifs_sb->wsize, len, &cur_len); + } while (len > 0); + + if (total_written > 0) { + spin_lock(&inode->i_lock); + if (*poffset > inode->i_size) + i_size_write(inode, *poffset); + spin_unlock(&inode->i_lock); + } + + cifs_stats_bytes_written(pTcon, total_written); + mark_inode_dirty_sync(inode); + + for (i = 0; i < num_pages; i++) + put_page(pages[i]); + kfree(to_send); + kfree(pages); + FreeXid(xid); + return total_written; +} + +static ssize_t cifs_user_writev(struct kiocb *iocb, const struct iovec *iov, + unsigned long nr_segs, loff_t pos) +{ + ssize_t written; + struct inode *inode; + + inode = iocb->ki_filp->f_path.dentry->d_inode; + + /* + * BB - optimize the way when signing is disabled. We can drop this + * extra memory-to-memory copying and use iovec buffers for constructing + * write request. + */ + + written = cifs_iovec_write(iocb->ki_filp, iov, nr_segs, &pos); + if (written > 0) { + CIFS_I(inode)->invalid_mapping = true; + iocb->ki_pos = pos; + } + + return written; +} + +ssize_t cifs_strict_writev(struct kiocb *iocb, const struct iovec *iov, + unsigned long nr_segs, loff_t pos) +{ + struct inode *inode; + + inode = iocb->ki_filp->f_path.dentry->d_inode; + + if (CIFS_I(inode)->clientCanCacheAll) + return generic_file_aio_write(iocb, iov, nr_segs, pos); + + /* + * In strict cache mode we need to write the data to the server exactly + * from the pos to pos+len-1 rather than flush all affected pages + * because it may cause a error with mandatory locks on these pages but + * not on the region from pos to ppos+len-1. + */ + + return cifs_user_writev(iocb, iov, nr_segs, pos); +} + static ssize_t cifs_iovec_read(struct file *file, const struct iovec *iov, unsigned long nr_segs, loff_t *poffset) -- cgit v1.2.3-18-g5258 From d39454ffe4a3c85428483b8a8a8e5e797b6363d5 Mon Sep 17 00:00:00 2001 From: Pavel Shilovsky Date: Mon, 24 Jan 2011 14:16:35 -0500 Subject: CIFS: Add strictcache mount option Use for switching on strict cache mode. In this mode the client reads from the cache all the time it has Oplock Level II, otherwise - read from the server. As for write - the client stores a data in the cache in Exclusive Oplock case, otherwise - write directly to the server. Signed-off-by: Pavel Shilovsky Reviewed-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/README | 5 +++++ fs/cifs/connect.c | 5 +++++ 2 files changed, 10 insertions(+) diff --git a/fs/cifs/README b/fs/cifs/README index 46af99ab361..fe168359082 100644 --- a/fs/cifs/README +++ b/fs/cifs/README @@ -452,6 +452,11 @@ A partial list of the supported mount options follows: if oplock (caching token) is granted and held. Note that direct allows write operations larger than page size to be sent to the server. + strictcache Use for switching on strict cache mode. In this mode the + client read from the cache all the time it has Oplock Level II, + otherwise - read from the server. All written data are stored + in the cache, but if the client doesn't have Exclusive Oplock, + it writes the data to the server. acl Allow setfacl and getfacl to manage posix ACLs if server supports them. (default) noacl Do not allow setfacl and getfacl calls on this mount diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 0cc3b81c2e8..47034af67b0 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -87,6 +87,7 @@ struct smb_vol { bool no_xattr:1; /* set if xattr (EA) support should be disabled*/ bool server_ino:1; /* use inode numbers from server ie UniqueId */ bool direct_io:1; + bool strict_io:1; /* strict cache behavior */ bool remap:1; /* set to remap seven reserved chars in filenames */ bool posix_paths:1; /* unset to not ask for posix pathnames. */ bool no_linux_ext:1; @@ -1344,6 +1345,8 @@ cifs_parse_mount_options(char *options, const char *devname, vol->direct_io = 1; } else if (strnicmp(data, "forcedirectio", 13) == 0) { vol->direct_io = 1; + } else if (strnicmp(data, "strictcache", 11) == 0) { + vol->strict_io = 1; } else if (strnicmp(data, "noac", 4) == 0) { printk(KERN_WARNING "CIFS: Mount option noac not " "supported. Instead set " @@ -2584,6 +2587,8 @@ static void setup_cifs_sb(struct smb_vol *pvolume_info, if (pvolume_info->multiuser) cifs_sb->mnt_cifs_flags |= (CIFS_MOUNT_MULTIUSER | CIFS_MOUNT_NO_PERM); + if (pvolume_info->strict_io) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_STRICT_IO; if (pvolume_info->direct_io) { cFYI(1, "mounting share using direct i/o"); cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DIRECT_IO; -- cgit v1.2.3-18-g5258 From c3810c88788d505d4ffd786addd111b745e42161 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 25 Jan 2011 20:50:07 +0100 Subject: PM / Runtime: Don't enable interrupts while running in_interrupt This patch (as1445) fixes a bug in the runtime PM core left over from the addition of the no_callbacks flag. If this flag is set then it is possible for rpm_suspend() to be called in_interrupt, so when releasing spinlocks it's important not to re-enable interrupts. To avoid an unnecessary save-and-restore of the interrupt flag, the patch also inlines a pm_request_idle() call. This fixes Bugzilla #27482. (The offending code was added in 2.6.37, so it's not necessary to apply this to any earlier stable kernels.) Signed-off-by: Alan Stern Reported-by: tim blechmann CC: Signed-off-by: Rafael J. Wysocki --- drivers/base/power/runtime.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index 656493a5e07..42615b419df 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -407,12 +407,15 @@ static int rpm_suspend(struct device *dev, int rpmflags) goto out; } + /* Maybe the parent is now able to suspend. */ if (parent && !parent->power.ignore_children && !dev->power.irq_safe) { - spin_unlock_irq(&dev->power.lock); + spin_unlock(&dev->power.lock); - pm_request_idle(parent); + spin_lock(&parent->power.lock); + rpm_idle(parent, RPM_ASYNC); + spin_unlock(&parent->power.lock); - spin_lock_irq(&dev->power.lock); + spin_lock(&dev->power.lock); } out: -- cgit v1.2.3-18-g5258 From ad3d2eedf0ed3611f5f86b9e4d0d15cc76c63465 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Mon, 17 Jan 2011 18:41:50 +0000 Subject: NFS4: Avoid potential NULL pointer dereference in decode_and_add_ds(). On Mon, 17 Jan 2011, Mi Jinlong wrote: > > > Jesper Juhl: > > strrchr() can return NULL if nothing is found. If this happens we'll > > dereference a NULL pointer in > > fs/nfs/nfs4filelayoutdev.c::decode_and_add_ds(). > > > > I tried to find some other code that guarantees that this can never > > happen but I was unsuccessful. So, unless someone else can point to some > > code that ensures this can never be a problem, I believe this patch is > > needed. > > > > While I was changing this code I also noticed that all the dprintk() > > statements, except one, start with "%s:". The one missing the ":" I added > > it to. > > Maybe another one also should be changed at decode_and_add_ds() at line 243: > > 243 printk("%s Decoded address and port %s\n", __func__, buf); > Missed that one. Thanks. Signed-off-by: Jesper Juhl Signed-off-by: Trond Myklebust --- fs/nfs/nfs4filelayoutdev.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/fs/nfs/nfs4filelayoutdev.c b/fs/nfs/nfs4filelayoutdev.c index 51fe64ace55..f5c9b125e8c 100644 --- a/fs/nfs/nfs4filelayoutdev.c +++ b/fs/nfs/nfs4filelayoutdev.c @@ -214,7 +214,7 @@ decode_and_add_ds(__be32 **pp, struct inode *inode) /* ipv6 length plus port is legal */ if (rlen > INET6_ADDRSTRLEN + 8) { - dprintk("%s Invalid address, length %d\n", __func__, + dprintk("%s: Invalid address, length %d\n", __func__, rlen); goto out_err; } @@ -225,6 +225,11 @@ decode_and_add_ds(__be32 **pp, struct inode *inode) /* replace the port dots with dashes for the in4_pton() delimiter*/ for (i = 0; i < 2; i++) { char *res = strrchr(buf, '.'); + if (!res) { + dprintk("%s: Failed finding expected dots in port\n", + __func__); + goto out_free; + } *res = '-'; } @@ -240,7 +245,7 @@ decode_and_add_ds(__be32 **pp, struct inode *inode) port = htons((tmp[0] << 8) | (tmp[1])); ds = nfs4_pnfs_ds_add(inode, ip_addr, port); - dprintk("%s Decoded address and port %s\n", __func__, buf); + dprintk("%s: Decoded address and port %s\n", __func__, buf); out_free: kfree(buf); out_err: -- cgit v1.2.3-18-g5258 From 839f7ad6932d95f4d5ae7267b95c574714ff3d5b Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Fri, 21 Jan 2011 15:54:57 +0000 Subject: NFS: Fix "kernel BUG at fs/aio.c:554!" Nick Piggin reports: > I'm getting use after frees in aio code in NFS > > [ 2703.396766] Call Trace: > [ 2703.396858] [] ? native_sched_clock+0x27/0x80 > [ 2703.396959] [] ? put_lock_stats+0xe/0x40 > [ 2703.397058] [] ? lock_release_holdtime+0xa8/0x140 > [ 2703.397159] [] lock_acquire+0x95/0x1b0 > [ 2703.397260] [] ? aio_put_req+0x2b/0x60 > [ 2703.397361] [] ? get_parent_ip+0x11/0x50 > [ 2703.397464] [] _raw_spin_lock_irq+0x41/0x80 > [ 2703.397564] [] ? aio_put_req+0x2b/0x60 > [ 2703.397662] [] aio_put_req+0x2b/0x60 > [ 2703.397761] [] do_io_submit+0x2be/0x7c0 > [ 2703.397895] [] sys_io_submit+0xb/0x10 > [ 2703.397995] [] system_call_fastpath+0x16/0x1b > > Adding some tracing, it is due to nfs completing the request then > returning something other than -EIOCBQUEUED, so aio.c > also completes the request. To address this, prevent the NFS direct I/O engine from completing async iocbs when the forward path returns an error without starting any I/O. This fix appears to survive ^C during both "xfstest no. 208" and "fsx -Z." It's likely this bug has existed for a very long while, as we are seeing very similar symptoms in OEL 5. Copying stable. Cc: Stable Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- fs/nfs/direct.c | 34 ++++++++++++++++++++-------------- 1 file changed, 20 insertions(+), 14 deletions(-) diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c index e6ace0d93c7..9943a75bb6d 100644 --- a/fs/nfs/direct.c +++ b/fs/nfs/direct.c @@ -407,15 +407,18 @@ static ssize_t nfs_direct_read_schedule_iovec(struct nfs_direct_req *dreq, pos += vec->iov_len; } + /* + * If no bytes were started, return the error, and let the + * generic layer handle the completion. + */ + if (requested_bytes == 0) { + nfs_direct_req_release(dreq); + return result < 0 ? result : -EIO; + } + if (put_dreq(dreq)) nfs_direct_complete(dreq); - - if (requested_bytes != 0) - return 0; - - if (result < 0) - return result; - return -EIO; + return 0; } static ssize_t nfs_direct_read(struct kiocb *iocb, const struct iovec *iov, @@ -841,15 +844,18 @@ static ssize_t nfs_direct_write_schedule_iovec(struct nfs_direct_req *dreq, pos += vec->iov_len; } + /* + * If no bytes were started, return the error, and let the + * generic layer handle the completion. + */ + if (requested_bytes == 0) { + nfs_direct_req_release(dreq); + return result < 0 ? result : -EIO; + } + if (put_dreq(dreq)) nfs_direct_write_complete(dreq, dreq->inode); - - if (requested_bytes != 0) - return 0; - - if (result < 0) - return result; - return -EIO; + return 0; } static ssize_t nfs_direct_write(struct kiocb *iocb, const struct iovec *iov, -- cgit v1.2.3-18-g5258 From ee5dc7732bd557bae6d10873a0aac606d2c551fb Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Fri, 21 Jan 2011 03:05:18 +0000 Subject: NFS: Fix "kernel BUG at fs/nfs/nfs3xdr.c:1338!" Milan Broz reports: > on today Linus' tree I get OOps if using nfs. > > server (2.6.36) exports dir: > /dir 172.16.1.0/24(rw,async,all_squash,no_subtree_check,anonuid=500,anongid=500) > > on client it is mounted in fstab > server:/dir /mnt/tst nfs rw,soft 0 0 > > and these commands OOpses it (simplified from a configure script): > > cd /dir > touch x > install x y > > [ 105.327701] ------------[ cut here ]------------ > [ 105.327979] kernel BUG at fs/nfs/nfs3xdr.c:1338! > [ 105.328075] invalid opcode: 0000 [#1] PREEMPT SMP > [ 105.328223] last sysfs file: /sys/devices/virtual/bdi/0:16/uevent > [ 105.328349] Modules linked in: usbcore dm_mod > [ 105.328553] > [ 105.328678] Pid: 3710, comm: install Not tainted 2.6.37+ #423 440BX Desktop Reference Platform/VMware Virtual Platform > [ 105.328853] EIP: 0060:[] EFLAGS: 00010282 CPU: 0 > [ 105.329152] EIP is at nfs3_xdr_enc_setacl3args+0x61/0x98 > [ 105.329249] EAX: ffffffea EBX: ce941d98 ECX: 00000000 EDX: 00000004 > [ 105.329340] ESI: ce941cd0 EDI: 000000a4 EBP: ce941cc0 ESP: ce941cb4 > [ 105.329431] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 > [ 105.329525] Process install (pid: 3710, ti=ce940000 task=ced36f20 task.ti=ce940000) > [ 105.336600] Stack: > [ 105.336693] ce941cd0 ce9dc000 00000000 ce941cf8 c12ecd02 c12f43e0 c116c00b cf754158 > [ 105.336982] ce9dc004 cf754284 ce9dc004 cf7ffee8 ceff9978 ce9dc000 cf7ffee8 ce9dc000 > [ 105.337182] ce9dc000 ce941d14 c12e698d cf75412c ce941d98 cf7ffee8 cf7fff20 00000000 > [ 105.337405] Call Trace: > [ 105.337695] [] rpcauth_wrap_req+0x75/0x7f > [ 105.337806] [] ? xdr_encode_opaque+0x12/0x15 > [ 105.337898] [] ? nfs3_xdr_enc_setacl3args+0x0/0x98 > [ 105.337988] [] call_transmit+0x17e/0x1e8 > [ 105.338072] [] __rpc_execute+0x6d/0x1a6 > [ 105.338155] [] rpc_execute+0x34/0x37 > [ 105.338235] [] rpc_run_task+0xb5/0xbd > [ 105.338316] [] rpc_call_sync+0x3d/0x58 > [ 105.338402] [] nfs3_proc_setacls+0x18e/0x24f > [ 105.338493] [] ? __kmalloc+0x148/0x1c4 > [ 105.338579] [] ? posix_acl_alloc+0x12/0x22 > [ 105.338665] [] nfs3_proc_setacl+0xa0/0xca > [ 105.338748] [] nfs3_setxattr+0x62/0x88 > [ 105.338834] [] ? sub_preempt_count+0x7c/0x89 > [ 105.338926] [] ? nfs3_setxattr+0x0/0x88 > [ 105.339026] [] __vfs_setxattr_noperm+0x26/0x95 > [ 105.339114] [] vfs_setxattr+0x5b/0x76 > [ 105.339211] [] setxattr+0x9d/0xc3 > [ 105.339298] [] ? handle_pte_fault+0x258/0x5cb > [ 105.339428] [] ? __free_pages+0x1a/0x23 > [ 105.339517] [] ? up_read+0x16/0x2c > [ 105.339599] [] ? fget+0x0/0xa3 > [ 105.339677] [] ? fget+0x0/0xa3 > [ 105.339760] [] ? get_parent_ip+0xb/0x31 > [ 105.339843] [] ? sub_preempt_count+0x7c/0x89 > [ 105.339931] [] sys_fsetxattr+0x51/0x79 > [ 105.340014] [] sysenter_do_call+0x12/0x32 > [ 105.340133] Code: 2e 76 18 00 58 31 d2 8b 7f 28 f6 43 04 01 74 03 8b 53 08 6a 00 8b 46 04 6a 01 8b 0b 52 89 fa e8 85 10 f8 ff 83 c4 0c 85 c0 79 04 <0f> 0b eb fe 31 c9 f6 43 04 04 74 03 8b 4b 0c 68 00 10 00 00 8d > [ 105.350321] EIP: [] nfs3_xdr_enc_setacl3args+0x61/0x98 SS:ESP 0068:ce941cb4 > [ 105.364385] ---[ end trace 01fcfe7f0f7f6e4a ]--- nfs3_xdr_enc_setacl3args() is not properly setting up the target buffer before nfsacl_encode() attempts to encode the ACL. Introduced by commit d9c407b1 "NFS: Introduce new-style XDR encoding functions for NFSv3." Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- fs/nfs/nfs3xdr.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/nfs/nfs3xdr.c b/fs/nfs/nfs3xdr.c index 01c5e8b1941..183c6b123d0 100644 --- a/fs/nfs/nfs3xdr.c +++ b/fs/nfs/nfs3xdr.c @@ -1328,10 +1328,13 @@ static void nfs3_xdr_enc_setacl3args(struct rpc_rqst *req, encode_nfs_fh3(xdr, NFS_FH(args->inode)); encode_uint32(xdr, args->mask); + + base = req->rq_slen; if (args->npages != 0) xdr_write_pages(xdr, args->pages, 0, args->len); + else + xdr_reserve_space(xdr, NFS_ACL_INLINE_BUFSIZE); - base = req->rq_slen; error = nfsacl_encode(xdr->buf, base, args->inode, (args->mask & NFS_ACL) ? args->acl_access : NULL, 1, 0); -- cgit v1.2.3-18-g5258 From 731f3f482ad3b2c58a1af2d0a9a634a82803706a Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Fri, 21 Jan 2011 03:05:28 +0000 Subject: NFS: nfsacl_{encode,decode} should return signed integer Clean up. The nfsacl_encode() and nfsacl_decode() functions return negative errno values, and each call site verifies that the returned value is not negative. Change the synopsis of both of these functions to reflect this usage. Document the synopsis and return values. Reported-by: Trond Myklebust Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- fs/nfs_common/nfsacl.c | 32 ++++++++++++++++++++++++++------ include/linux/nfsacl.h | 4 ++-- 2 files changed, 28 insertions(+), 8 deletions(-) diff --git a/fs/nfs_common/nfsacl.c b/fs/nfs_common/nfsacl.c index fc1c52571c0..a3e78bd1867 100644 --- a/fs/nfs_common/nfsacl.c +++ b/fs/nfs_common/nfsacl.c @@ -72,9 +72,20 @@ xdr_nfsace_encode(struct xdr_array2_desc *desc, void *elem) return 0; } -unsigned int -nfsacl_encode(struct xdr_buf *buf, unsigned int base, struct inode *inode, - struct posix_acl *acl, int encode_entries, int typeflag) +/** + * nfsacl_encode - Encode an NFSv3 ACL + * + * @buf: destination xdr_buf to contain XDR encoded ACL + * @base: byte offset in xdr_buf where XDR'd ACL begins + * @inode: inode of file whose ACL this is + * @acl: posix_acl to encode + * @encode_entries: whether to encode ACEs as well + * @typeflag: ACL type: NFS_ACL_DEFAULT or zero + * + * Returns size of encoded ACL in bytes or a negative errno value. + */ +int nfsacl_encode(struct xdr_buf *buf, unsigned int base, struct inode *inode, + struct posix_acl *acl, int encode_entries, int typeflag) { int entries = (acl && acl->a_count) ? max_t(int, acl->a_count, 4) : 0; struct nfsacl_encode_desc nfsacl_desc = { @@ -224,9 +235,18 @@ posix_acl_from_nfsacl(struct posix_acl *acl) return 0; } -unsigned int -nfsacl_decode(struct xdr_buf *buf, unsigned int base, unsigned int *aclcnt, - struct posix_acl **pacl) +/** + * nfsacl_decode - Decode an NFSv3 ACL + * + * @buf: xdr_buf containing XDR'd ACL data to decode + * @base: byte offset in xdr_buf where XDR'd ACL begins + * @aclcnt: count of ACEs in decoded posix_acl + * @pacl: buffer in which to place decoded posix_acl + * + * Returns the length of the decoded ACL in bytes, or a negative errno value. + */ +int nfsacl_decode(struct xdr_buf *buf, unsigned int base, unsigned int *aclcnt, + struct posix_acl **pacl) { struct nfsacl_decode_desc nfsacl_desc = { .desc = { diff --git a/include/linux/nfsacl.h b/include/linux/nfsacl.h index f321b578ede..fabcb1e5c46 100644 --- a/include/linux/nfsacl.h +++ b/include/linux/nfsacl.h @@ -51,10 +51,10 @@ nfsacl_size(struct posix_acl *acl_access, struct posix_acl *acl_default) return w; } -extern unsigned int +extern int nfsacl_encode(struct xdr_buf *buf, unsigned int base, struct inode *inode, struct posix_acl *acl, int encode_entries, int typeflag); -extern unsigned int +extern int nfsacl_decode(struct xdr_buf *buf, unsigned int base, unsigned int *aclcnt, struct posix_acl **pacl); -- cgit v1.2.3-18-g5258 From f61f6da0d53842e849bab7f69e1431bd3de1136d Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Fri, 21 Jan 2011 03:05:38 +0000 Subject: NFS: Prevent memory allocation failure in nfsacl_encode() nfsacl_encode() allocates memory in certain cases. This of course is not guaranteed to work. Since commit 9f06c719 "SUNRPC: New xdr_streams XDR encoder API", the kernel's XDR encoders can't return a result indicating possibly a failure, so a memory allocation failure in nfsacl_encode() has become fatal (ie, the XDR code Oopses) in some cases. However, the allocated memory is a tiny fixed amount, on the order of 40-50 bytes. We can easily use a stack-allocated buffer for this, with only a wee bit of nose-holding. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- fs/nfs/nfs3acl.c | 4 ++-- fs/nfs_common/nfsacl.c | 22 +++++++++++++++------- fs/posix_acl.c | 17 +++++++++++++---- include/linux/posix_acl.h | 1 + 4 files changed, 31 insertions(+), 13 deletions(-) diff --git a/fs/nfs/nfs3acl.c b/fs/nfs/nfs3acl.c index 9f88c5f4c7e..27434277165 100644 --- a/fs/nfs/nfs3acl.c +++ b/fs/nfs/nfs3acl.c @@ -311,8 +311,8 @@ static int nfs3_proc_setacls(struct inode *inode, struct posix_acl *acl, if (!nfs_server_capable(inode, NFS_CAP_ACLS)) goto out; - /* We are doing this here, because XDR marshalling can only - return -ENOMEM. */ + /* We are doing this here because XDR marshalling does not + * return any results, it BUGs. */ status = -ENOSPC; if (acl != NULL && acl->a_count > NFS_ACL_MAX_ENTRIES) goto out; diff --git a/fs/nfs_common/nfsacl.c b/fs/nfs_common/nfsacl.c index a3e78bd1867..84c27d69d42 100644 --- a/fs/nfs_common/nfsacl.c +++ b/fs/nfs_common/nfsacl.c @@ -42,6 +42,11 @@ struct nfsacl_encode_desc { gid_t gid; }; +struct nfsacl_simple_acl { + struct posix_acl acl; + struct posix_acl_entry ace[4]; +}; + static int xdr_nfsace_encode(struct xdr_array2_desc *desc, void *elem) { @@ -99,17 +104,22 @@ int nfsacl_encode(struct xdr_buf *buf, unsigned int base, struct inode *inode, .uid = inode->i_uid, .gid = inode->i_gid, }; + struct nfsacl_simple_acl aclbuf; int err; - struct posix_acl *acl2 = NULL; if (entries > NFS_ACL_MAX_ENTRIES || xdr_encode_word(buf, base, entries)) return -EINVAL; if (encode_entries && acl && acl->a_count == 3) { - /* Fake up an ACL_MASK entry. */ - acl2 = posix_acl_alloc(4, GFP_KERNEL); - if (!acl2) - return -ENOMEM; + struct posix_acl *acl2 = &aclbuf.acl; + + /* Avoid the use of posix_acl_alloc(). nfsacl_encode() is + * invoked in contexts where a memory allocation failure is + * fatal. Fortunately this fake ACL is small enough to + * construct on the stack. */ + memset(acl2, 0, sizeof(acl2)); + posix_acl_init(acl2, 4); + /* Insert entries in canonical order: other orders seem to confuse Solaris VxFS. */ acl2->a_entries[0] = acl->a_entries[0]; /* ACL_USER_OBJ */ @@ -120,8 +130,6 @@ int nfsacl_encode(struct xdr_buf *buf, unsigned int base, struct inode *inode, nfsacl_desc.acl = acl2; } err = xdr_encode_array2(buf, base + 4, &nfsacl_desc.desc); - if (acl2) - posix_acl_release(acl2); if (!err) err = 8 + nfsacl_desc.desc.elem_size * nfsacl_desc.desc.array_len; diff --git a/fs/posix_acl.c b/fs/posix_acl.c index 39df95a0ec2..b1cf6bf4b41 100644 --- a/fs/posix_acl.c +++ b/fs/posix_acl.c @@ -22,6 +22,7 @@ #include +EXPORT_SYMBOL(posix_acl_init); EXPORT_SYMBOL(posix_acl_alloc); EXPORT_SYMBOL(posix_acl_clone); EXPORT_SYMBOL(posix_acl_valid); @@ -31,6 +32,16 @@ EXPORT_SYMBOL(posix_acl_create_masq); EXPORT_SYMBOL(posix_acl_chmod_masq); EXPORT_SYMBOL(posix_acl_permission); +/* + * Init a fresh posix_acl + */ +void +posix_acl_init(struct posix_acl *acl, int count) +{ + atomic_set(&acl->a_refcount, 1); + acl->a_count = count; +} + /* * Allocate a new ACL with the specified number of entries. */ @@ -40,10 +51,8 @@ posix_acl_alloc(int count, gfp_t flags) const size_t size = sizeof(struct posix_acl) + count * sizeof(struct posix_acl_entry); struct posix_acl *acl = kmalloc(size, flags); - if (acl) { - atomic_set(&acl->a_refcount, 1); - acl->a_count = count; - } + if (acl) + posix_acl_init(acl, count); return acl; } diff --git a/include/linux/posix_acl.h b/include/linux/posix_acl.h index d68283a898b..54211c1cd92 100644 --- a/include/linux/posix_acl.h +++ b/include/linux/posix_acl.h @@ -71,6 +71,7 @@ posix_acl_release(struct posix_acl *acl) /* posix_acl.c */ +extern void posix_acl_init(struct posix_acl *, int); extern struct posix_acl *posix_acl_alloc(int, gfp_t); extern struct posix_acl *posix_acl_clone(const struct posix_acl *, gfp_t); extern int posix_acl_valid(const struct posix_acl *); -- cgit v1.2.3-18-g5258 From 80c30e8de4f81851b1f712bcc596e11d53bc76f1 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 24 Jan 2011 20:50:26 +0000 Subject: NLM: Fix "kernel BUG at fs/lockd/host.c:417!" or ".../host.c:283!" Nick Bowler reports: > We were just having some NFS server troubles, and my client machine > running 2.6.38-rc1+ (specifically, commit 2b1caf6ed7b888c95) crashed > hard (syslog output appended to this mail). > > I'm not sure what the exact timeline was or how to reproduce this, > but the server was rebooted during all this. Since I've never seen > this happen before, it is possibly a regression from previous kernel > releases. However, I recently updated my nfs-utils (on the client) to > version 1.2.3, so that might be related as well. [ BUG output redacted ] When done searching, the for_each_host loop in next_host_state() falls through and returns the final host on the host chain without bumping it's reference count. Since the host's ref count is only one at that point, releasing the host in nlm_host_rebooted() attempts to destroy the host prematurely, and therefore hits a BUG(). Likely, the original intent of the for_each_host behavior in next_host_state() was to handle the case when the host chain is empty. Searching the chain and finding no suitable host to return needs to be handled as well. Defensively restructure next_host_state() always to return NULL when the loop falls through. Introduced by commit b10e30f6 "lockd: reorganize nlm_host_rebooted". Cc: J. Bruce Fields Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- fs/lockd/host.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/fs/lockd/host.c b/fs/lockd/host.c index 5f1bcb2f06f..b7c99bfb3da 100644 --- a/fs/lockd/host.c +++ b/fs/lockd/host.c @@ -520,7 +520,7 @@ static struct nlm_host *next_host_state(struct hlist_head *cache, struct nsm_handle *nsm, const struct nlm_reboot *info) { - struct nlm_host *host = NULL; + struct nlm_host *host; struct hlist_head *chain; struct hlist_node *pos; @@ -532,12 +532,13 @@ static struct nlm_host *next_host_state(struct hlist_head *cache, host->h_state++; nlm_get_host(host); - goto out; + mutex_unlock(&nlm_host_mutex); + return host; } } -out: + mutex_unlock(&nlm_host_mutex); - return host; + return NULL; } /** -- cgit v1.2.3-18-g5258 From 778be232a207e79088ba70d832ac25dfea6fbf1a Mon Sep 17 00:00:00 2001 From: Andy Adamson Date: Tue, 25 Jan 2011 15:38:01 +0000 Subject: NFS do not find client in NFSv4 pg_authenticate The information required to find the nfs_client cooresponding to the incoming back channel request is contained in the NFS layer. Perform minimal checking in the RPC layer pg_authenticate method, and push more detailed checking into the NFS layer where the nfs_client can be found. Signed-off-by: Andy Adamson Signed-off-by: Trond Myklebust --- fs/nfs/callback.c | 109 +++++++++++----------------------------- fs/nfs/callback.h | 4 +- fs/nfs/callback_proc.c | 10 +--- fs/nfs/callback_xdr.c | 5 +- fs/nfs/client.c | 15 ++---- fs/nfs/internal.h | 3 +- fs/nfs/nfs4state.c | 6 --- include/linux/sunrpc/bc_xprt.h | 13 ----- include/linux/sunrpc/svc_xprt.h | 1 - net/sunrpc/svcsock.c | 4 +- 10 files changed, 42 insertions(+), 128 deletions(-) diff --git a/fs/nfs/callback.c b/fs/nfs/callback.c index 199016528fc..e3d29426905 100644 --- a/fs/nfs/callback.c +++ b/fs/nfs/callback.c @@ -134,33 +134,6 @@ out_err: } #if defined(CONFIG_NFS_V4_1) -/* - * * CB_SEQUENCE operations will fail until the callback sessionid is set. - * */ -int nfs4_set_callback_sessionid(struct nfs_client *clp) -{ - struct svc_serv *serv = clp->cl_rpcclient->cl_xprt->bc_serv; - struct nfs4_sessionid *bc_sid; - - if (!serv->sv_bc_xprt) - return -EINVAL; - - /* on success freed in xprt_free */ - bc_sid = kmalloc(sizeof(struct nfs4_sessionid), GFP_KERNEL); - if (!bc_sid) - return -ENOMEM; - memcpy(bc_sid->data, &clp->cl_session->sess_id.data, - NFS4_MAX_SESSIONID_LEN); - spin_lock_bh(&serv->sv_cb_lock); - serv->sv_bc_xprt->xpt_bc_sid = bc_sid; - spin_unlock_bh(&serv->sv_cb_lock); - dprintk("%s set xpt_bc_sid=%u:%u:%u:%u for sv_bc_xprt %p\n", __func__, - ((u32 *)bc_sid->data)[0], ((u32 *)bc_sid->data)[1], - ((u32 *)bc_sid->data)[2], ((u32 *)bc_sid->data)[3], - serv->sv_bc_xprt); - return 0; -} - /* * The callback service for NFSv4.1 callbacks */ @@ -266,10 +239,6 @@ static inline void nfs_callback_bc_serv(u32 minorversion, struct rpc_xprt *xprt, struct nfs_callback_data *cb_info) { } -int nfs4_set_callback_sessionid(struct nfs_client *clp) -{ - return 0; -} #endif /* CONFIG_NFS_V4_1 */ /* @@ -359,78 +328,58 @@ void nfs_callback_down(int minorversion) mutex_unlock(&nfs_callback_mutex); } -static int check_gss_callback_principal(struct nfs_client *clp, - struct svc_rqst *rqstp) +/* Boolean check of RPC_AUTH_GSS principal */ +int +check_gss_callback_principal(struct nfs_client *clp, struct svc_rqst *rqstp) { struct rpc_clnt *r = clp->cl_rpcclient; char *p = svc_gss_principal(rqstp); + if (rqstp->rq_authop->flavour != RPC_AUTH_GSS) + return 1; + /* No RPC_AUTH_GSS on NFSv4.1 back channel yet */ if (clp->cl_minorversion != 0) - return SVC_DROP; + return 0; /* * It might just be a normal user principal, in which case * userspace won't bother to tell us the name at all. */ if (p == NULL) - return SVC_DENIED; + return 0; /* Expect a GSS_C_NT_HOSTBASED_NAME like "nfs@serverhostname" */ if (memcmp(p, "nfs@", 4) != 0) - return SVC_DENIED; + return 0; p += 4; if (strcmp(p, r->cl_server) != 0) - return SVC_DENIED; - return SVC_OK; + return 0; + return 1; } -/* pg_authenticate method helper */ -static struct nfs_client *nfs_cb_find_client(struct svc_rqst *rqstp) -{ - struct nfs4_sessionid *sessionid = bc_xprt_sid(rqstp); - int is_cb_compound = rqstp->rq_proc == CB_COMPOUND ? 1 : 0; - - dprintk("--> %s rq_proc %d\n", __func__, rqstp->rq_proc); - if (svc_is_backchannel(rqstp)) - /* Sessionid (usually) set after CB_NULL ping */ - return nfs4_find_client_sessionid(svc_addr(rqstp), sessionid, - is_cb_compound); - else - /* No callback identifier in pg_authenticate */ - return nfs4_find_client_no_ident(svc_addr(rqstp)); -} - -/* pg_authenticate method for nfsv4 callback threads. */ +/* + * pg_authenticate method for nfsv4 callback threads. + * + * The authflavor has been negotiated, so an incorrect flavor is a server + * bug. Drop packets with incorrect authflavor. + * + * All other checking done after NFS decoding where the nfs_client can be + * found in nfs4_callback_compound + */ static int nfs_callback_authenticate(struct svc_rqst *rqstp) { - struct nfs_client *clp; - RPC_IFDEBUG(char buf[RPC_MAX_ADDRBUFLEN]); - int ret = SVC_OK; - - /* Don't talk to strangers */ - clp = nfs_cb_find_client(rqstp); - if (clp == NULL) - return SVC_DROP; - - dprintk("%s: %s NFSv4 callback!\n", __func__, - svc_print_addr(rqstp, buf, sizeof(buf))); - switch (rqstp->rq_authop->flavour) { - case RPC_AUTH_NULL: - if (rqstp->rq_proc != CB_NULL) - ret = SVC_DENIED; - break; - case RPC_AUTH_UNIX: - break; - case RPC_AUTH_GSS: - ret = check_gss_callback_principal(clp, rqstp); - break; - default: - ret = SVC_DENIED; + case RPC_AUTH_NULL: + if (rqstp->rq_proc != CB_NULL) + return SVC_DROP; + break; + case RPC_AUTH_GSS: + /* No RPC_AUTH_GSS support yet in NFSv4.1 */ + if (svc_is_backchannel(rqstp)) + return SVC_DROP; } - nfs_put_client(clp); - return ret; + return SVC_OK; } /* diff --git a/fs/nfs/callback.h b/fs/nfs/callback.h index d3b44f9bd74..46d93ce7311 100644 --- a/fs/nfs/callback.h +++ b/fs/nfs/callback.h @@ -7,6 +7,7 @@ */ #ifndef __LINUX_FS_NFS_CALLBACK_H #define __LINUX_FS_NFS_CALLBACK_H +#include #define NFS4_CALLBACK 0x40000000 #define NFS4_CALLBACK_XDRSIZE 2048 @@ -37,7 +38,6 @@ enum nfs4_callback_opnum { struct cb_process_state { __be32 drc_status; struct nfs_client *clp; - struct nfs4_sessionid *svc_sid; /* v4.1 callback service sessionid */ }; struct cb_compound_hdr_arg { @@ -168,7 +168,7 @@ extern unsigned nfs4_callback_layoutrecall( extern void nfs4_check_drain_bc_complete(struct nfs4_session *ses); extern void nfs4_cb_take_slot(struct nfs_client *clp); #endif /* CONFIG_NFS_V4_1 */ - +extern int check_gss_callback_principal(struct nfs_client *, struct svc_rqst *); extern __be32 nfs4_callback_getattr(struct cb_getattrargs *args, struct cb_getattrres *res, struct cb_process_state *cps); diff --git a/fs/nfs/callback_proc.c b/fs/nfs/callback_proc.c index 4bb91cb2620..829f406e91d 100644 --- a/fs/nfs/callback_proc.c +++ b/fs/nfs/callback_proc.c @@ -373,17 +373,11 @@ __be32 nfs4_callback_sequence(struct cb_sequenceargs *args, { struct nfs_client *clp; int i; - __be32 status; + __be32 status = htonl(NFS4ERR_BADSESSION); cps->clp = NULL; - status = htonl(NFS4ERR_BADSESSION); - /* Incoming session must match the callback session */ - if (memcmp(&args->csa_sessionid, cps->svc_sid, NFS4_MAX_SESSIONID_LEN)) - goto out; - - clp = nfs4_find_client_sessionid(args->csa_addr, - &args->csa_sessionid, 1); + clp = nfs4_find_client_sessionid(args->csa_addr, &args->csa_sessionid); if (clp == NULL) goto out; diff --git a/fs/nfs/callback_xdr.c b/fs/nfs/callback_xdr.c index 23112c263f8..14e0f9371d1 100644 --- a/fs/nfs/callback_xdr.c +++ b/fs/nfs/callback_xdr.c @@ -794,10 +794,9 @@ static __be32 nfs4_callback_compound(struct svc_rqst *rqstp, void *argp, void *r if (hdr_arg.minorversion == 0) { cps.clp = nfs4_find_client_ident(hdr_arg.cb_ident); - if (!cps.clp) + if (!cps.clp || !check_gss_callback_principal(cps.clp, rqstp)) return rpc_drop_reply; - } else - cps.svc_sid = bc_xprt_sid(rqstp); + } hdr_res.taglen = hdr_arg.taglen; hdr_res.tag = hdr_arg.tag; diff --git a/fs/nfs/client.c b/fs/nfs/client.c index 192f2f86026..bd3ca32879e 100644 --- a/fs/nfs/client.c +++ b/fs/nfs/client.c @@ -1206,16 +1206,11 @@ nfs4_find_client_ident(int cb_ident) * For CB_COMPOUND calls, find a client by IP address, protocol version, * minorversion, and sessionID * - * CREATE_SESSION triggers a CB_NULL ping from servers. The callback service - * sessionid can only be set after the CREATE_SESSION return, so a CB_NULL - * can arrive before the callback sessionid is set. For CB_NULL calls, - * find a client by IP address protocol version, and minorversion. - * * Returns NULL if no such client */ struct nfs_client * nfs4_find_client_sessionid(const struct sockaddr *addr, - struct nfs4_sessionid *sid, int is_cb_compound) + struct nfs4_sessionid *sid) { struct nfs_client *clp; @@ -1227,9 +1222,9 @@ nfs4_find_client_sessionid(const struct sockaddr *addr, if (!nfs4_has_session(clp)) continue; - /* Match sessionid unless cb_null call*/ - if (is_cb_compound && (memcmp(clp->cl_session->sess_id.data, - sid->data, NFS4_MAX_SESSIONID_LEN) != 0)) + /* Match sessionid*/ + if (memcmp(clp->cl_session->sess_id.data, + sid->data, NFS4_MAX_SESSIONID_LEN) != 0) continue; atomic_inc(&clp->cl_count); @@ -1244,7 +1239,7 @@ nfs4_find_client_sessionid(const struct sockaddr *addr, struct nfs_client * nfs4_find_client_sessionid(const struct sockaddr *addr, - struct nfs4_sessionid *sid, int is_cb_compound) + struct nfs4_sessionid *sid) { return NULL; } diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h index 4644f04b4b4..cf9fdbdabc6 100644 --- a/fs/nfs/internal.h +++ b/fs/nfs/internal.h @@ -133,8 +133,7 @@ extern void nfs_put_client(struct nfs_client *); extern struct nfs_client *nfs4_find_client_no_ident(const struct sockaddr *); extern struct nfs_client *nfs4_find_client_ident(int); extern struct nfs_client * -nfs4_find_client_sessionid(const struct sockaddr *, struct nfs4_sessionid *, - int); +nfs4_find_client_sessionid(const struct sockaddr *, struct nfs4_sessionid *); extern struct nfs_server *nfs_create_server( const struct nfs_parsed_mount_data *, struct nfs_fh *); diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index 2336d532cf6..e6742b57a04 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -232,12 +232,6 @@ int nfs41_init_clientid(struct nfs_client *clp, struct rpc_cred *cred) status = nfs4_proc_create_session(clp); if (status != 0) goto out; - status = nfs4_set_callback_sessionid(clp); - if (status != 0) { - printk(KERN_WARNING "Sessionid not set. No callback service\n"); - nfs_callback_down(1); - status = 0; - } nfs41_setup_state_renewal(clp); nfs_mark_client_ready(clp, NFS_CS_READY); out: diff --git a/include/linux/sunrpc/bc_xprt.h b/include/linux/sunrpc/bc_xprt.h index c50b458b8a3..082884295f8 100644 --- a/include/linux/sunrpc/bc_xprt.h +++ b/include/linux/sunrpc/bc_xprt.h @@ -47,14 +47,6 @@ static inline int svc_is_backchannel(const struct svc_rqst *rqstp) return 1; return 0; } -static inline struct nfs4_sessionid *bc_xprt_sid(struct svc_rqst *rqstp) -{ - if (svc_is_backchannel(rqstp)) - return (struct nfs4_sessionid *) - rqstp->rq_server->sv_bc_xprt->xpt_bc_sid; - return NULL; -} - #else /* CONFIG_NFS_V4_1 */ static inline int xprt_setup_backchannel(struct rpc_xprt *xprt, unsigned int min_reqs) @@ -67,11 +59,6 @@ static inline int svc_is_backchannel(const struct svc_rqst *rqstp) return 0; } -static inline struct nfs4_sessionid *bc_xprt_sid(struct svc_rqst *rqstp) -{ - return NULL; -} - static inline void xprt_free_bc_request(struct rpc_rqst *req) { } diff --git a/include/linux/sunrpc/svc_xprt.h b/include/linux/sunrpc/svc_xprt.h index 059877b4d85..7ad9751a0d8 100644 --- a/include/linux/sunrpc/svc_xprt.h +++ b/include/linux/sunrpc/svc_xprt.h @@ -77,7 +77,6 @@ struct svc_xprt { size_t xpt_remotelen; /* length of address */ struct rpc_wait_queue xpt_bc_pending; /* backchannel wait queue */ struct list_head xpt_users; /* callbacks on free */ - void *xpt_bc_sid; /* back channel session ID */ struct net *xpt_net; struct rpc_xprt *xpt_bc_xprt; /* NFSv4.1 backchannel */ diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c index 7bd3bbba471..d802e941d36 100644 --- a/net/sunrpc/svcsock.c +++ b/net/sunrpc/svcsock.c @@ -1609,9 +1609,7 @@ static struct svc_xprt *svc_bc_create_socket(struct svc_serv *serv, */ static void svc_bc_sock_free(struct svc_xprt *xprt) { - if (xprt) { - kfree(xprt->xpt_bc_sid); + if (xprt) kfree(container_of(xprt, struct svc_sock, sk_xprt)); - } } #endif /* CONFIG_NFS_V4_1 */ -- cgit v1.2.3-18-g5258 From 2c4cdf8f6d3cfb48036400952329555099c8c92c Mon Sep 17 00:00:00 2001 From: Andy Adamson Date: Tue, 25 Jan 2011 15:38:02 +0000 Subject: NFS fix cb_sequence error processing Always assign the cb_process_state nfs_client pointer so a processing error in cb_sequence after the nfs_client is found and referenced returns a non-NULL cb_process_state nfs_client and the matching nfs_put_client in nfs4_callback_compound dereferences the client. Signed-off-by: Andy Adamson Signed-off-by: Trond Myklebust --- fs/nfs/callback_proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/callback_proc.c b/fs/nfs/callback_proc.c index 829f406e91d..89587573fe5 100644 --- a/fs/nfs/callback_proc.c +++ b/fs/nfs/callback_proc.c @@ -408,9 +408,9 @@ __be32 nfs4_callback_sequence(struct cb_sequenceargs *args, res->csr_highestslotid = NFS41_BC_MAX_CALLBACKS - 1; res->csr_target_highestslotid = NFS41_BC_MAX_CALLBACKS - 1; nfs4_cb_take_slot(clp); - cps->clp = clp; /* put in nfs4_callback_compound */ out: + cps->clp = clp; /* put in nfs4_callback_compound */ for (i = 0; i < args->csa_nrclists; i++) kfree(args->csa_rclists[i].rcl_refcalls); kfree(args->csa_rclists); -- cgit v1.2.3-18-g5258 From b2a2897dc4a59684321de425652061c62a0569d0 Mon Sep 17 00:00:00 2001 From: Andy Adamson Date: Tue, 25 Jan 2011 15:38:03 +0000 Subject: NFS improve pnfs_put_deviceid_cache debug print What we really want to know is the ref count. Signed-off-by: Andy Adamson Signed-off-by: Trond Myklebust --- fs/nfs/pnfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index bc408976973..1b1bc1a0fb0 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -951,7 +951,7 @@ pnfs_put_deviceid_cache(struct nfs_client *clp) { struct pnfs_deviceid_cache *local = clp->cl_devid_cache; - dprintk("--> %s cl_devid_cache %p\n", __func__, clp->cl_devid_cache); + dprintk("--> %s ({%d})\n", __func__, atomic_read(&local->dc_ref)); if (atomic_dec_and_lock(&local->dc_ref, &clp->cl_lock)) { int i; /* Verify cache is empty */ -- cgit v1.2.3-18-g5258 From 27dc1cd3ad9300f81e1219e5fc305d91d85353f8 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 25 Jan 2011 15:28:21 -0500 Subject: NFS: nfs_wcc_update_inode() should set nfsi->attr_gencount If the call to nfs_wcc_update_inode() results in an attribute update, we need to ensure that the inode's attr_gencount gets bumped too, otherwise we are not protected against races with other GETATTR calls. Signed-off-by: Trond Myklebust --- fs/nfs/inode.c | 26 +++++++++++++++++--------- 1 file changed, 17 insertions(+), 9 deletions(-) diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index d8512423ba7..1cc600e77bb 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -881,9 +881,10 @@ out: return ret; } -static void nfs_wcc_update_inode(struct inode *inode, struct nfs_fattr *fattr) +static unsigned long nfs_wcc_update_inode(struct inode *inode, struct nfs_fattr *fattr) { struct nfs_inode *nfsi = NFS_I(inode); + unsigned long ret = 0; if ((fattr->valid & NFS_ATTR_FATTR_PRECHANGE) && (fattr->valid & NFS_ATTR_FATTR_CHANGE) @@ -891,25 +892,32 @@ static void nfs_wcc_update_inode(struct inode *inode, struct nfs_fattr *fattr) nfsi->change_attr = fattr->change_attr; if (S_ISDIR(inode->i_mode)) nfsi->cache_validity |= NFS_INO_INVALID_DATA; + ret |= NFS_INO_INVALID_ATTR; } /* If we have atomic WCC data, we may update some attributes */ if ((fattr->valid & NFS_ATTR_FATTR_PRECTIME) && (fattr->valid & NFS_ATTR_FATTR_CTIME) - && timespec_equal(&inode->i_ctime, &fattr->pre_ctime)) - memcpy(&inode->i_ctime, &fattr->ctime, sizeof(inode->i_ctime)); + && timespec_equal(&inode->i_ctime, &fattr->pre_ctime)) { + memcpy(&inode->i_ctime, &fattr->ctime, sizeof(inode->i_ctime)); + ret |= NFS_INO_INVALID_ATTR; + } if ((fattr->valid & NFS_ATTR_FATTR_PREMTIME) && (fattr->valid & NFS_ATTR_FATTR_MTIME) && timespec_equal(&inode->i_mtime, &fattr->pre_mtime)) { - memcpy(&inode->i_mtime, &fattr->mtime, sizeof(inode->i_mtime)); - if (S_ISDIR(inode->i_mode)) - nfsi->cache_validity |= NFS_INO_INVALID_DATA; + memcpy(&inode->i_mtime, &fattr->mtime, sizeof(inode->i_mtime)); + if (S_ISDIR(inode->i_mode)) + nfsi->cache_validity |= NFS_INO_INVALID_DATA; + ret |= NFS_INO_INVALID_ATTR; } if ((fattr->valid & NFS_ATTR_FATTR_PRESIZE) && (fattr->valid & NFS_ATTR_FATTR_SIZE) && i_size_read(inode) == nfs_size_to_loff_t(fattr->pre_size) - && nfsi->npages == 0) - i_size_write(inode, nfs_size_to_loff_t(fattr->size)); + && nfsi->npages == 0) { + i_size_write(inode, nfs_size_to_loff_t(fattr->size)); + ret |= NFS_INO_INVALID_ATTR; + } + return ret; } /** @@ -1223,7 +1231,7 @@ static int nfs_update_inode(struct inode *inode, struct nfs_fattr *fattr) | NFS_INO_REVAL_PAGECACHE); /* Do atomic weak cache consistency updates */ - nfs_wcc_update_inode(inode, fattr); + invalid |= nfs_wcc_update_inode(inode, fattr); /* More cache consistency checks */ if (fattr->valid & NFS_ATTR_FATTR_CHANGE) { -- cgit v1.2.3-18-g5258 From 73a8bd74e2618990dbb218c3d82f53e60acd9af0 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 23 Jan 2011 23:27:15 -0800 Subject: ipv6: Revert 'administrative down' address handling changes. This reverts the following set of commits: d1ed113f1669390da9898da3beddcc058d938587 ("ipv6: remove duplicate neigh_ifdown") 29ba5fed1bbd09c2cba890798c8f9eaab251401d ("ipv6: don't flush routes when setting loopback down") 9d82ca98f71fd686ef2f3017c5e3e6a4871b6e46 ("ipv6: fix missing in6_ifa_put in addrconf") 2de795707294972f6c34bae9de713e502c431296 ("ipv6: addrconf: don't remove address state on ifdown if the address is being kept") 8595805aafc8b077e01804c9a3668e9aa3510e89 ("IPv6: only notify protocols if address is compeletely gone") 27bdb2abcc5edb3526e25407b74bf17d1872c329 ("IPv6: keep tentative addresses in hash table") 93fa159abe50d3c55c7f83622d3f5c09b6e06f4b ("IPv6: keep route for tentative address") 8f37ada5b5f6bfb4d251a7f510f249cb855b77b3 ("IPv6: fix race between cleanup and add/delete address") 84e8b803f1e16f3a2b8b80f80a63fa2f2f8a9be6 ("IPv6: addrconf notify when address is unavailable") dc2b99f71ef477a31020511876ab4403fb7c4420 ("IPv6: keep permanent addresses on admin down") because the core semantic change to ipv6 address handling on ifdown has broken some things, in particular "disable_ipv6" sysctl handling. Stephen has made several attempts to get things back in working order, but nothing has restored disable_ipv6 fully yet. Reported-by: Eric W. Biederman Tested-by: Eric W. Biederman Signed-off-by: David S. Miller --- net/ipv6/addrconf.c | 81 ++++++++++++++++++++++------------------------------- 1 file changed, 33 insertions(+), 48 deletions(-) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 24a1cf110d8..fd6782e3a03 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -2661,14 +2661,12 @@ static int addrconf_ifdown(struct net_device *dev, int how) struct net *net = dev_net(dev); struct inet6_dev *idev; struct inet6_ifaddr *ifa; - LIST_HEAD(keep_list); - int state; + int state, i; ASSERT_RTNL(); - /* Flush routes if device is being removed or it is not loopback */ - if (how || !(dev->flags & IFF_LOOPBACK)) - rt6_ifdown(net, dev); + rt6_ifdown(net, dev); + neigh_ifdown(&nd_tbl, dev); idev = __in6_dev_get(dev); if (idev == NULL) @@ -2689,6 +2687,23 @@ static int addrconf_ifdown(struct net_device *dev, int how) } + /* Step 2: clear hash table */ + for (i = 0; i < IN6_ADDR_HSIZE; i++) { + struct hlist_head *h = &inet6_addr_lst[i]; + struct hlist_node *n; + + spin_lock_bh(&addrconf_hash_lock); + restart: + hlist_for_each_entry_rcu(ifa, n, h, addr_lst) { + if (ifa->idev == idev) { + hlist_del_init_rcu(&ifa->addr_lst); + addrconf_del_timer(ifa); + goto restart; + } + } + spin_unlock_bh(&addrconf_hash_lock); + } + write_lock_bh(&idev->lock); /* Step 2: clear flags for stateless addrconf */ @@ -2722,52 +2737,23 @@ static int addrconf_ifdown(struct net_device *dev, int how) struct inet6_ifaddr, if_list); addrconf_del_timer(ifa); - /* If just doing link down, and address is permanent - and not link-local, then retain it. */ - if (!how && - (ifa->flags&IFA_F_PERMANENT) && - !(ipv6_addr_type(&ifa->addr) & IPV6_ADDR_LINKLOCAL)) { - list_move_tail(&ifa->if_list, &keep_list); - - /* If not doing DAD on this address, just keep it. */ - if ((dev->flags&(IFF_NOARP|IFF_LOOPBACK)) || - idev->cnf.accept_dad <= 0 || - (ifa->flags & IFA_F_NODAD)) - continue; + list_del(&ifa->if_list); - /* If it was tentative already, no need to notify */ - if (ifa->flags & IFA_F_TENTATIVE) - continue; + write_unlock_bh(&idev->lock); - /* Flag it for later restoration when link comes up */ - ifa->flags |= IFA_F_TENTATIVE; - ifa->state = INET6_IFADDR_STATE_DAD; - } else { - list_del(&ifa->if_list); - - /* clear hash table */ - spin_lock_bh(&addrconf_hash_lock); - hlist_del_init_rcu(&ifa->addr_lst); - spin_unlock_bh(&addrconf_hash_lock); - - write_unlock_bh(&idev->lock); - spin_lock_bh(&ifa->state_lock); - state = ifa->state; - ifa->state = INET6_IFADDR_STATE_DEAD; - spin_unlock_bh(&ifa->state_lock); - - if (state != INET6_IFADDR_STATE_DEAD) { - __ipv6_ifa_notify(RTM_DELADDR, ifa); - atomic_notifier_call_chain(&inet6addr_chain, - NETDEV_DOWN, ifa); - } + spin_lock_bh(&ifa->state_lock); + state = ifa->state; + ifa->state = INET6_IFADDR_STATE_DEAD; + spin_unlock_bh(&ifa->state_lock); - in6_ifa_put(ifa); - write_lock_bh(&idev->lock); + if (state != INET6_IFADDR_STATE_DEAD) { + __ipv6_ifa_notify(RTM_DELADDR, ifa); + atomic_notifier_call_chain(&inet6addr_chain, NETDEV_DOWN, ifa); } - } + in6_ifa_put(ifa); - list_splice(&keep_list, &idev->addr_list); + write_lock_bh(&idev->lock); + } write_unlock_bh(&idev->lock); @@ -4156,8 +4142,7 @@ static void __ipv6_ifa_notify(int event, struct inet6_ifaddr *ifp) addrconf_leave_solict(ifp->idev, &ifp->addr); dst_hold(&ifp->rt->dst); - if (ifp->state == INET6_IFADDR_STATE_DEAD && - ip6_del_rt(ifp->rt)) + if (ip6_del_rt(ifp->rt)) dst_free(&ifp->rt->dst); break; } -- cgit v1.2.3-18-g5258 From eb3e554b4b3a56386ef5214dbe0e3935a350178b Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 24 Jan 2011 19:28:49 +0100 Subject: mac80211: fix a crash in ieee80211_beacon_get_tim on change_interface Some drivers (e.g. ath9k) do not always disable beacons when they're supposed to. When an interface is changed using the change_interface op, the mode specific sdata part is in an undefined state and trying to get a beacon at this point can produce weird crashes. To fix this, add a check for ieee80211_sdata_running before using anything from the sdata. Signed-off-by: Felix Fietkau Cc: stable@kernel.org Signed-off-by: John W. Linville --- net/mac80211/tx.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 5950e3abead..b64b42bc774 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2230,6 +2230,9 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, sdata = vif_to_sdata(vif); + if (!ieee80211_sdata_running(sdata)) + goto out; + if (tim_offset) *tim_offset = 0; if (tim_length) -- cgit v1.2.3-18-g5258 From 9c4cf6d94fb362c27a24df5223ed6e327eb7279a Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 25 Jan 2011 17:42:29 +0800 Subject: rt2x00: add device id for windy31 usb device This patch adds the device id for the windy31 USB device to the rt73usb driver. Thanks to Ralf Flaxa for reporting this and providing testing and a sample device. Reported-by: Ralf Flaxa Tested-by: Ralf Flaxa Cc: stable Signed-off-by: Greg Kroah-Hartman Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt73usb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 0b4e8590cbb..029be3c6c03 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -2446,6 +2446,7 @@ static struct usb_device_id rt73usb_device_table[] = { { USB_DEVICE(0x04bb, 0x093d), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x148f, 0x2671), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x0812, 0x3101), USB_DEVICE_DATA(&rt73usb_ops) }, /* Qcom */ { USB_DEVICE(0x18e8, 0x6196), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x18e8, 0x6229), USB_DEVICE_DATA(&rt73usb_ops) }, -- cgit v1.2.3-18-g5258 From acd9f9cc305ca2e5da2a39f6f6160cd4b476e38b Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Tue, 25 Jan 2011 08:38:06 -0800 Subject: MAINTAINERS: remove Reinette Chatre as iwlwifi maintainer Signed-off-by: Reinette Chatre Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 23d04363a19..c9ec9d80430 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3209,7 +3209,6 @@ F: drivers/net/wimax/i2400m/ F: include/linux/wimax/i2400m.h INTEL WIRELESS WIFI LINK (iwlwifi) -M: Reinette Chatre M: Wey-Yi Guy M: Intel Linux Wireless L: linux-wireless@vger.kernel.org -- cgit v1.2.3-18-g5258 From 44f5324b5d13ef2187729d949eca442689627f39 Mon Sep 17 00:00:00 2001 From: Jerry Chu Date: Tue, 25 Jan 2011 13:46:30 -0800 Subject: TCP: fix a bug that triggers large number of TCP RST by mistake This patch fixes a bug that causes TCP RST packets to be generated on otherwise correctly behaved applications, e.g., no unread data on close,..., etc. To trigger the bug, at least two conditions must be met: 1. The FIN flag is set on the last data packet, i.e., it's not on a separate, FIN only packet. 2. The size of the last data chunk on the receive side matches exactly with the size of buffer posted by the receiver, and the receiver closes the socket without any further read attempt. This bug was first noticed on our netperf based testbed for our IW10 proposal to IETF where a large number of RST packets were observed. netperf's read side code meets the condition 2 above 100%. Before the fix, tcp_data_queue() will queue the last skb that meets condition 1 to sk_receive_queue even though it has fully copied out (skb_copy_datagram_iovec()) the data. Then if condition 2 is also met, tcp_recvmsg() often returns all the copied out data successfully without actually consuming the skb, due to a check "if ((chunk = len - tp->ucopy.len) != 0) {" and "len -= chunk;" after tcp_prequeue_process() that causes "len" to become 0 and an early exit from the big while loop. I don't see any reason not to free the skb whose data have been fully consumed in tcp_data_queue(), regardless of the FIN flag. We won't get there if MSG_PEEK is on. Am I missing some arcane cases related to urgent data? Signed-off-by: H.K. Jerry Chu Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 2549b29b062..eb7f82ebf4a 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -4399,7 +4399,7 @@ static void tcp_data_queue(struct sock *sk, struct sk_buff *skb) if (!skb_copy_datagram_iovec(skb, 0, tp->ucopy.iov, chunk)) { tp->ucopy.len -= chunk; tp->copied_seq += chunk; - eaten = (chunk == skb->len && !th->fin); + eaten = (chunk == skb->len); tcp_rcv_space_adjust(sk); } local_bh_disable(); -- cgit v1.2.3-18-g5258 From de221bd5eb5e754806fcc39c40bb12b96515d9c5 Mon Sep 17 00:00:00 2001 From: Nicolas de Pesloüan Date: Mon, 24 Jan 2011 13:21:37 +0000 Subject: bonding: update documentation - alternate configuration. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The bonding documentation used to provide configuration details and examples for initscripts and sysconfig only. This patch describe the third possible configuration: /etc/network/interfaces. Signed-off-by: Nicolas de Pesloüan Signed-off-by: David S. Miller --- Documentation/networking/bonding.txt | 83 ++++++++++++++++++++++++++++++------ 1 file changed, 71 insertions(+), 12 deletions(-) diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt index 5dc638791d9..25d2f4141d2 100644 --- a/Documentation/networking/bonding.txt +++ b/Documentation/networking/bonding.txt @@ -49,7 +49,8 @@ Table of Contents 3.3 Configuring Bonding Manually with Ifenslave 3.3.1 Configuring Multiple Bonds Manually 3.4 Configuring Bonding Manually via Sysfs -3.5 Overriding Configuration for Special Cases +3.5 Configuration with Interfaces Support +3.6 Overriding Configuration for Special Cases 4. Querying Bonding Configuration 4.1 Bonding Configuration @@ -161,8 +162,8 @@ onwards) do not have /usr/include/linux symbolically linked to the default kernel source include directory. SECOND IMPORTANT NOTE: - If you plan to configure bonding using sysfs, you do not need -to use ifenslave. + If you plan to configure bonding using sysfs or using the +/etc/network/interfaces file, you do not need to use ifenslave. 2. Bonding Driver Options ========================= @@ -779,22 +780,26 @@ resend_igmp You can configure bonding using either your distro's network initialization scripts, or manually using either ifenslave or the -sysfs interface. Distros generally use one of two packages for the -network initialization scripts: initscripts or sysconfig. Recent -versions of these packages have support for bonding, while older +sysfs interface. Distros generally use one of three packages for the +network initialization scripts: initscripts, sysconfig or interfaces. +Recent versions of these packages have support for bonding, while older versions do not. We will first describe the options for configuring bonding for -distros using versions of initscripts and sysconfig with full or -partial support for bonding, then provide information on enabling +distros using versions of initscripts, sysconfig and interfaces with full +or partial support for bonding, then provide information on enabling bonding without support from the network initialization scripts (i.e., older versions of initscripts or sysconfig). - If you're unsure whether your distro uses sysconfig or -initscripts, or don't know if it's new enough, have no fear. + If you're unsure whether your distro uses sysconfig, +initscripts or interfaces, or don't know if it's new enough, have no fear. Determining this is fairly straightforward. - First, issue the command: + First, look for a file called interfaces in /etc/network directory. +If this file is present in your system, then your system use interfaces. See +Configuration with Interfaces Support. + + Else, issue the command: $ rpm -qf /sbin/ifup @@ -1327,8 +1332,62 @@ echo 2000 > /sys/class/net/bond1/bonding/arp_interval echo +eth2 > /sys/class/net/bond1/bonding/slaves echo +eth3 > /sys/class/net/bond1/bonding/slaves -3.5 Overriding Configuration for Special Cases +3.5 Configuration with Interfaces Support +----------------------------------------- + + This section applies to distros which use /etc/network/interfaces file +to describe network interface configuration, most notably Debian and it's +derivatives. + + The ifup and ifdown commands on Debian don't support bonding out of +the box. The ifenslave-2.6 package should be installed to provide bonding +support. Once installed, this package will provide bond-* options to be used +into /etc/network/interfaces. + + Note that ifenslave-2.6 package will load the bonding module and use +the ifenslave command when appropriate. + +Example Configurations +---------------------- + +In /etc/network/interfaces, the following stanza will configure bond0, in +active-backup mode, with eth0 and eth1 as slaves. + +auto bond0 +iface bond0 inet dhcp + bond-slaves eth0 eth1 + bond-mode active-backup + bond-miimon 100 + bond-primary eth0 eth1 + +If the above configuration doesn't work, you might have a system using +upstart for system startup. This is most notably true for recent +Ubuntu versions. The following stanza in /etc/network/interfaces will +produce the same result on those systems. + +auto bond0 +iface bond0 inet dhcp + bond-slaves none + bond-mode active-backup + bond-miimon 100 + +auto eth0 +iface eth0 inet manual + bond-master bond0 + bond-primary eth0 eth1 + +auto eth1 +iface eth1 inet manual + bond-master bond0 + bond-primary eth0 eth1 + +For a full list of bond-* supported options in /etc/network/interfaces and some +more advanced examples tailored to you particular distros, see the files in +/usr/share/doc/ifenslave-2.6. + +3.6 Overriding Configuration for Special Cases ---------------------------------------------- + When using the bonding driver, the physical port which transmits a frame is typically selected by the bonding driver, and is not relevant to the user or system administrator. The output port is simply selected using the policies of -- cgit v1.2.3-18-g5258 From dd58ddc6928f711d8fb7101182215a0f23cf41f1 Mon Sep 17 00:00:00 2001 From: Linus Lüssing Date: Tue, 25 Jan 2011 21:56:16 +0000 Subject: batman-adv: Fix kernel panic when fetching vis data on a vis server MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The hash_iterate removal introduced a bug leading to a kernel panic when fetching the vis data on a vis server. That commit forgot to rename one variable name, which this commit fixes now. Reported-by: Russell Senior Signed-off-by: Linus Lüssing Signed-off-by: Sven Eckelmann --- net/batman-adv/vis.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/batman-adv/vis.c b/net/batman-adv/vis.c index cd4c4231fa4..f69a3748f8a 100644 --- a/net/batman-adv/vis.c +++ b/net/batman-adv/vis.c @@ -268,10 +268,10 @@ int vis_seq_print_text(struct seq_file *seq, void *offset) buff_pos += sprintf(buff + buff_pos, "%pM,", entry->addr); - for (i = 0; i < packet->entries; i++) + for (j = 0; j < packet->entries; j++) buff_pos += vis_data_read_entry( buff + buff_pos, - &entries[i], + &entries[j], entry->addr, entry->primary); -- cgit v1.2.3-18-g5258 From 021cb59ae3869fb18ebc9fceb959f379c5ca835c Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Mon, 10 Jan 2011 21:56:08 +0100 Subject: mmc: ushc: Remove duplicate include of usb.h Including usb.h once is enough in drivers/mmc/host/ushc.c This removes the duplicate. Signed-off-by: Jesper Juhl Signed-off-by: Chris Ball --- drivers/mmc/host/ushc.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/mmc/host/ushc.c b/drivers/mmc/host/ushc.c index f8f65df9b01..f08f944ac53 100644 --- a/drivers/mmc/host/ushc.c +++ b/drivers/mmc/host/ushc.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include #include -- cgit v1.2.3-18-g5258 From 9047b435a0b43952f5d1f7eb15a9b63a36efc7f2 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Tue, 11 Jan 2011 16:35:56 +0000 Subject: mmc: mmci: don't read command response when invalid Don't read the command response from the registers when either the command timed out (because there was no response from the card) or the checksum on the response was invalid. Signed-off-by: Russell King Signed-off-by: Chris Ball --- drivers/mmc/host/mmci.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 2de12fe155d..4b8dcd5b2a0 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -342,15 +342,15 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd, host->cmd = NULL; - cmd->resp[0] = readl(base + MMCIRESPONSE0); - cmd->resp[1] = readl(base + MMCIRESPONSE1); - cmd->resp[2] = readl(base + MMCIRESPONSE2); - cmd->resp[3] = readl(base + MMCIRESPONSE3); - if (status & MCI_CMDTIMEOUT) { cmd->error = -ETIMEDOUT; } else if (status & MCI_CMDCRCFAIL && cmd->flags & MMC_RSP_CRC) { cmd->error = -EILSEQ; + } else { + cmd->resp[0] = readl(base + MMCIRESPONSE0); + cmd->resp[1] = readl(base + MMCIRESPONSE1); + cmd->resp[2] = readl(base + MMCIRESPONSE2); + cmd->resp[3] = readl(base + MMCIRESPONSE3); } if (!cmd->data || cmd->error) { -- cgit v1.2.3-18-g5258 From 3119cbda858fc9ae10a69919e5f278abd6d93bb5 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Tue, 11 Jan 2011 12:43:50 +0000 Subject: mmc: jz4740: don't treat NULL clk as an error clk_get() returns a struct clk cookie to the driver and some platforms may return NULL if they only support a single clock. clk_get() has only failed if it returns a ERR_PTR() encoded pointer. Signed-off-by: Jamie Iles Signed-off-by: Chris Ball --- drivers/mmc/host/jz4740_mmc.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c index b3a0ab0e4c2..74218ad677e 100644 --- a/drivers/mmc/host/jz4740_mmc.c +++ b/drivers/mmc/host/jz4740_mmc.c @@ -14,6 +14,7 @@ */ #include +#include #include #include #include @@ -827,8 +828,8 @@ static int __devinit jz4740_mmc_probe(struct platform_device* pdev) } host->clk = clk_get(&pdev->dev, "mmc"); - if (!host->clk) { - ret = -ENOENT; + if (IS_ERR(host->clk)) { + ret = PTR_ERR(host->clk); dev_err(&pdev->dev, "Failed to get mmc clock\n"); goto err_free_host; } -- cgit v1.2.3-18-g5258 From c7a360b05b5430ac1d75dc7d53c586ada60a05cb Mon Sep 17 00:00:00 2001 From: Andy Adamson Date: Tue, 25 Jan 2011 19:15:32 -0500 Subject: NFS construct consistent co_ownerid for v4.1 As stated in section 2.4 of RFC 5661, subsequent instances of the client need to present the same co_ownerid. Concatinate the client's IP dot address, host name, and the rpc_auth pseudoflavor to form the co_ownerid. Signed-off-by: Andy Adamson Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 30 ++++++++++-------------------- 1 file changed, 10 insertions(+), 20 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 9d992b0346e..78936a8f40a 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -50,6 +50,7 @@ #include #include #include +#include #include "nfs4_fs.h" #include "delegation.h" @@ -4572,27 +4573,16 @@ int nfs4_proc_exchange_id(struct nfs_client *clp, struct rpc_cred *cred) *p = htonl((u32)clp->cl_boot_time.tv_nsec); args.verifier = &verifier; - while (1) { - args.id_len = scnprintf(args.id, sizeof(args.id), - "%s/%s %u", - clp->cl_ipaddr, - rpc_peeraddr2str(clp->cl_rpcclient, - RPC_DISPLAY_ADDR), - clp->cl_id_uniquifier); - - status = rpc_call_sync(clp->cl_rpcclient, &msg, 0); - - if (status != -NFS4ERR_CLID_INUSE) - break; - - if (signalled()) - break; - - if (++clp->cl_id_uniquifier == 0) - break; - } + args.id_len = scnprintf(args.id, sizeof(args.id), + "%s/%s.%s/%u", + clp->cl_ipaddr, + init_utsname()->nodename, + init_utsname()->domainname, + clp->cl_rpcclient->cl_auth->au_flavor); - status = nfs4_check_cl_exchange_flags(clp->cl_exchange_flags); + status = rpc_call_sync(clp->cl_rpcclient, &msg, 0); + if (!status) + status = nfs4_check_cl_exchange_flags(clp->cl_exchange_flags); dprintk("<-- %s status= %d\n", __func__, status); return status; } -- cgit v1.2.3-18-g5258 From 548f07d2a36a4b085c059edb25edb3cd8d71fe3e Mon Sep 17 00:00:00 2001 From: Jaehoon Chung Date: Wed, 12 Jan 2011 11:59:12 +0900 Subject: mmc: sdhci-s3c: add platform_8bit_width() hook We have 8-bit width support but is not a v3 controller. So we need platform_8bit_width() to support 8-bit buswidth. Also we need MMC_CAP_8_BIT_DATA, so we add it in platdata. This gets 8-bit support working again on s3c, after we previously disabled 8-bit by default on non-v3 controllers. Signed-off-by: Jaehoon Chung Signed-off-by: Kyungmin Park Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-s3c.c | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c index 17203586305..5309ab95aad 100644 --- a/drivers/mmc/host/sdhci-s3c.c +++ b/drivers/mmc/host/sdhci-s3c.c @@ -277,10 +277,43 @@ static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock) host->clock = clock; } +/** + * sdhci_s3c_platform_8bit_width - support 8bit buswidth + * @host: The SDHCI host being queried + * @width: MMC_BUS_WIDTH_ macro for the bus width being requested + * + * We have 8-bit width support but is not a v3 controller. + * So we add platform_8bit_width() and support 8bit width. + */ +static int sdhci_s3c_platform_8bit_width(struct sdhci_host *host, int width) +{ + u8 ctrl; + + ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); + + switch (width) { + case MMC_BUS_WIDTH_8: + ctrl |= SDHCI_CTRL_8BITBUS; + ctrl &= ~SDHCI_CTRL_4BITBUS; + break; + case MMC_BUS_WIDTH_4: + ctrl |= SDHCI_CTRL_4BITBUS; + ctrl &= ~SDHCI_CTRL_8BITBUS; + break; + default: + break; + } + + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); + + return 0; +} + static struct sdhci_ops sdhci_s3c_ops = { .get_max_clock = sdhci_s3c_get_max_clk, .set_clock = sdhci_s3c_set_clock, .get_min_clock = sdhci_s3c_get_min_clock, + .platform_8bit_width = sdhci_s3c_platform_8bit_width, }; static void sdhci_s3c_notify_change(struct platform_device *dev, int state) @@ -473,6 +506,9 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) if (pdata->cd_type == S3C_SDHCI_CD_PERMANENT) host->mmc->caps = MMC_CAP_NONREMOVABLE; + if (pdata->host_caps) + host->mmc->caps |= pdata->host_caps; + host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR | SDHCI_QUIRK_32BIT_DMA_SIZE); -- cgit v1.2.3-18-g5258 From a34650f0f1ca589cda09c48cb62baf15e680a247 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Tue, 11 Jan 2011 22:39:35 -0500 Subject: mmc: bfin_sdh: fix alloc size for private data The bfin_sdh driver allocates the wrong size for the private data in the mmc_host. The first parameter of mmc_alloc_host should be the size of the local driver struct rather than the common mmc_host. Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger Cc: Signed-off-by: Chris Ball --- drivers/mmc/host/bfin_sdh.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/host/bfin_sdh.c b/drivers/mmc/host/bfin_sdh.c index bac7d62866b..0371bf50224 100644 --- a/drivers/mmc/host/bfin_sdh.c +++ b/drivers/mmc/host/bfin_sdh.c @@ -462,7 +462,7 @@ static int __devinit sdh_probe(struct platform_device *pdev) goto out; } - mmc = mmc_alloc_host(sizeof(*mmc), &pdev->dev); + mmc = mmc_alloc_host(sizeof(struct sdh_host), &pdev->dev); if (!mmc) { ret = -ENOMEM; goto out; -- cgit v1.2.3-18-g5258 From 9a57c3e487d25f69715705dfeef6eb9e4d666ad7 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 24 Jan 2011 17:13:53 -0800 Subject: x86: Remove left over system_64.h Left-over from the x86 merge ... Signed-off-by: Yinghai Lu LKML-Reference: <4D3E23D1.7010405@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/system_64.h | 22 ---------------------- 1 file changed, 22 deletions(-) delete mode 100644 arch/x86/include/asm/system_64.h diff --git a/arch/x86/include/asm/system_64.h b/arch/x86/include/asm/system_64.h deleted file mode 100644 index 1159e091ad0..00000000000 --- a/arch/x86/include/asm/system_64.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef _ASM_X86_SYSTEM_64_H -#define _ASM_X86_SYSTEM_64_H - -#include -#include - - -static inline unsigned long read_cr8(void) -{ - unsigned long cr8; - asm volatile("movq %%cr8,%0" : "=r" (cr8)); - return cr8; -} - -static inline void write_cr8(unsigned long val) -{ - asm volatile("movq %0,%%cr8" :: "r" (val) : "memory"); -} - -#include - -#endif /* _ASM_X86_SYSTEM_64_H */ -- cgit v1.2.3-18-g5258 From 889a7a6a5d5e64063effd40056bdc7b8fb336bd1 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 25 Jan 2011 17:31:54 +0100 Subject: percpu, x86: Fix percpu_xchg_op() These recent percpu commits: 2485b6464cf8: x86,percpu: Move out of place 64 bit ops into X86_64 section 8270137a0d50: cpuops: Use cmpxchg for xchg to avoid lock semantics Caused this 'perf top' crash: Kernel panic - not syncing: Fatal exception in interrupt Pid: 0, comm: swapper Tainted: G D 2.6.38-rc2-00181-gef71723 #413 Call Trace: [] ? panic ? kmsg_dump ? kmsg_dump ? oops_end ? no_context ? __bad_area_nosemaphore ? perf_output_begin ? bad_area_nosemaphore ? do_page_fault ? __task_pid_nr_ns ? perf_event_tid ? __perf_event_header__init_id ? validate_chain ? perf_output_sample ? trace_hardirqs_off ? page_fault ? irq_work_run ? update_process_times ? tick_sched_timer ? tick_sched_timer ? __run_hrtimer ? hrtimer_interrupt ? account_system_vtime ? smp_apic_timer_interrupt ? apic_timer_interrupt ... Looking at assembly code, I found: list = this_cpu_xchg(irq_work_list, NULL); gives this wrong code : (gcc-4.1.2 cross compiler) ffffffff810bc45e: mov %gs:0xead0,%rax cmpxchg %rax,%gs:0xead0 jne ffffffff810bc45e test %rax,%rax je ffffffff810bc4aa Tell gcc we dirty eax/rax register in percpu_xchg_op() Compiler must use another register to store pxo_new__ We also dont need to reload percpu value after a jump, since a 'failed' cmpxchg already updated eax/rax Wrong generated code was : xor %rax,%rax /* load 0 into %rax */ 1: mov %gs:0xead0,%rax cmpxchg %rax,%gs:0xead0 jne 1b test %rax,%rax After patch : xor %rdx,%rdx /* load 0 into %rdx */ mov %gs:0xead0,%rax 1: cmpxchg %rdx,%gs:0xead0 jne 1b: test %rax,%rax Signed-off-by: Eric Dumazet Cc: Arnaldo Carvalho de Melo Cc: Linus Torvalds Cc: Frederic Weisbecker Cc: Steven Rostedt Cc: Peter Zijlstra Cc: Christoph Lameter Cc: Tejun Heo LKML-Reference: <1295973114.3588.312.camel@edumazet-laptop> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/percpu.h | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h index 3788f4649db..7e172955ee5 100644 --- a/arch/x86/include/asm/percpu.h +++ b/arch/x86/include/asm/percpu.h @@ -273,34 +273,34 @@ do { \ typeof(var) pxo_new__ = (nval); \ switch (sizeof(var)) { \ case 1: \ - asm("\n1:mov "__percpu_arg(1)",%%al" \ - "\n\tcmpxchgb %2, "__percpu_arg(1) \ + asm("\n\tmov "__percpu_arg(1)",%%al" \ + "\n1:\tcmpxchgb %2, "__percpu_arg(1) \ "\n\tjnz 1b" \ - : "=a" (pxo_ret__), "+m" (var) \ + : "=&a" (pxo_ret__), "+m" (var) \ : "q" (pxo_new__) \ : "memory"); \ break; \ case 2: \ - asm("\n1:mov "__percpu_arg(1)",%%ax" \ - "\n\tcmpxchgw %2, "__percpu_arg(1) \ + asm("\n\tmov "__percpu_arg(1)",%%ax" \ + "\n1:\tcmpxchgw %2, "__percpu_arg(1) \ "\n\tjnz 1b" \ - : "=a" (pxo_ret__), "+m" (var) \ + : "=&a" (pxo_ret__), "+m" (var) \ : "r" (pxo_new__) \ : "memory"); \ break; \ case 4: \ - asm("\n1:mov "__percpu_arg(1)",%%eax" \ - "\n\tcmpxchgl %2, "__percpu_arg(1) \ + asm("\n\tmov "__percpu_arg(1)",%%eax" \ + "\n1:\tcmpxchgl %2, "__percpu_arg(1) \ "\n\tjnz 1b" \ - : "=a" (pxo_ret__), "+m" (var) \ + : "=&a" (pxo_ret__), "+m" (var) \ : "r" (pxo_new__) \ : "memory"); \ break; \ case 8: \ - asm("\n1:mov "__percpu_arg(1)",%%rax" \ - "\n\tcmpxchgq %2, "__percpu_arg(1) \ + asm("\n\tmov "__percpu_arg(1)",%%rax" \ + "\n1:\tcmpxchgq %2, "__percpu_arg(1) \ "\n\tjnz 1b" \ - : "=a" (pxo_ret__), "+m" (var) \ + : "=&a" (pxo_ret__), "+m" (var) \ : "r" (pxo_new__) \ : "memory"); \ break; \ -- cgit v1.2.3-18-g5258 From 1f6b5dd41f3b38739f0275b1539c57b34c5b22a3 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Tue, 25 Jan 2011 16:54:22 +0100 Subject: ARM: mxs: acknowledge gpio irq MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes a machine hang after a gpio irq triggered. Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-mxs/gpio.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-mxs/gpio.c b/arch/arm/mach-mxs/gpio.c index d7ad7a61366..cb0c0e83a52 100644 --- a/arch/arm/mach-mxs/gpio.c +++ b/arch/arm/mach-mxs/gpio.c @@ -139,6 +139,8 @@ static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc) struct mxs_gpio_port *port = (struct mxs_gpio_port *)get_irq_data(irq); u32 gpio_irq_no_base = port->virtual_irq_start; + desc->irq_data.chip->irq_ack(&desc->irq_data); + irq_stat = __raw_readl(port->base + PINCTRL_IRQSTAT(port->id)) & __raw_readl(port->base + PINCTRL_IRQEN(port->id)); -- cgit v1.2.3-18-g5258 From e37b6a7b27b400c3aa488db8c6629a05095bc79c Mon Sep 17 00:00:00 2001 From: Paul Turner Date: Fri, 21 Jan 2011 20:44:59 -0800 Subject: sched: Fix sign under-flows in wake_affine While care is taken around the zero-point in effective_load to not exceed the instantaneous rq->weight, it's still possible (e.g. using wake_idx != 0) for (load + effective_load) to underflow. In this case the comparing the unsigned values can result in incorrect balanced decisions. Signed-off-by: Paul Turner Signed-off-by: Peter Zijlstra LKML-Reference: <20110122044851.734245014@google.com> Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 354769979c0..ccecfec02a7 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -1432,7 +1432,7 @@ static inline unsigned long effective_load(struct task_group *tg, int cpu, static int wake_affine(struct sched_domain *sd, struct task_struct *p, int sync) { - unsigned long this_load, load; + s64 this_load, load; int idx, this_cpu, prev_cpu; unsigned long tl_per_task; struct task_group *tg; @@ -1471,8 +1471,8 @@ static int wake_affine(struct sched_domain *sd, struct task_struct *p, int sync) * Otherwise check if either cpus are near enough in load to allow this * task to be woken on this_cpu. */ - if (this_load) { - unsigned long this_eff_load, prev_eff_load; + if (this_load > 0) { + s64 this_eff_load, prev_eff_load; this_eff_load = 100; this_eff_load *= power_of(prev_cpu); -- cgit v1.2.3-18-g5258 From b815f1963e47b9b69bb17e0588bd5af5b1114ae0 Mon Sep 17 00:00:00 2001 From: Paul Turner Date: Fri, 21 Jan 2011 20:45:00 -0800 Subject: sched: Fix/remove redundant cfs_rq checks Since updates are against an entity's queuing cfs_rq it's not possible to enter update_cfs_{shares,load} with a NULL cfs_rq. (Indeed, update_cfs_load would crash prior to the check if we did anyway since we load is examined during the initializers). Also, in the update_cfs_load case there's no point in maintaining averages for rq->cfs_rq since we don't perform shares distribution at that level -- NULL check is replaced accordingly. Thanks to Dan Carpenter for pointing out the deference before NULL check. Signed-off-by: Paul Turner Signed-off-by: Peter Zijlstra LKML-Reference: <20110122044851.825284940@google.com> Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index ccecfec02a7..1997383ba4d 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -722,7 +722,7 @@ static void update_cfs_load(struct cfs_rq *cfs_rq, int global_update) u64 now, delta; unsigned long load = cfs_rq->load.weight; - if (!cfs_rq) + if (cfs_rq->tg == &root_task_group) return; now = rq_of(cfs_rq)->clock; @@ -830,9 +830,6 @@ static void update_cfs_shares(struct cfs_rq *cfs_rq, long weight_delta) struct sched_entity *se; long shares; - if (!cfs_rq) - return; - tg = cfs_rq->tg; se = tg->se[cpu_of(rq_of(cfs_rq))]; if (!se) -- cgit v1.2.3-18-g5258 From 05ca62c6ca17f39b88fa956d5ebc1fa6e93ad5e3 Mon Sep 17 00:00:00 2001 From: Paul Turner Date: Fri, 21 Jan 2011 20:45:02 -0800 Subject: sched: Use rq->clock_task instead of rq->clock for correctly maintaining load averages The delta in clock_task is a more fair attribution of how much time a tg has been contributing load to the current cpu. While not really important it also means we're more in sync (by magnitude) with respect to periodic updates (since __update_curr deltas are clock_task based). Signed-off-by: Paul Turner Signed-off-by: Peter Zijlstra LKML-Reference: <20110122044852.007092349@google.com> Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 1997383ba4d..0c26e2df450 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -725,7 +725,7 @@ static void update_cfs_load(struct cfs_rq *cfs_rq, int global_update) if (cfs_rq->tg == &root_task_group) return; - now = rq_of(cfs_rq)->clock; + now = rq_of(cfs_rq)->clock_task; delta = now - cfs_rq->load_stamp; /* truncate load history at 4 idle periods */ -- cgit v1.2.3-18-g5258 From 6cb8e872c800be55496a56d1e1a6aafba8fa936d Mon Sep 17 00:00:00 2001 From: Hans-Christian Egtvedt Date: Mon, 24 Jan 2011 13:51:58 +0100 Subject: avr32: add missing include causing undefined pgtable_page_* references This patch adds the linux/mm.h header file to the AVR32 arch pgalloc.c implementation to fix the undefined reference to pgtable_page_ctor() and pgtable_page_dtor(). Signed-off-by: Hans-Christian Egtvedt --- arch/avr32/include/asm/pgalloc.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/avr32/include/asm/pgalloc.h b/arch/avr32/include/asm/pgalloc.h index 92ecd8446ef..bc7e8ae479e 100644 --- a/arch/avr32/include/asm/pgalloc.h +++ b/arch/avr32/include/asm/pgalloc.h @@ -8,6 +8,7 @@ #ifndef __ASM_AVR32_PGALLOC_H #define __ASM_AVR32_PGALLOC_H +#include #include #include #include -- cgit v1.2.3-18-g5258 From ded9f5238bb719737f82b0b5b957937cb0203804 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Wed, 26 Jan 2011 11:46:12 +0100 Subject: ALSA: HDA: Fix automute on Thinkpad L412/L512 BugLink: http://bugs.launchpad.net/bugs/707902 More Thinkpad machines with invalid SKU found, that disables automute between speakers and headphones on these machines. Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index be4df4c6fd5..2fa9ed99c32 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -14954,9 +14954,11 @@ static struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x104d, 0x9084, "Sony VAIO", ALC275_FIXUP_SONY_HWEQ), SND_PCI_QUIRK_VENDOR(0x104d, "Sony VAIO", ALC269_FIXUP_SONY_VAIO), SND_PCI_QUIRK(0x1028, 0x0470, "Dell M101z", ALC269_FIXUP_DELL_M101Z), - SND_PCI_QUIRK(0x17aa, 0x21b8, "Thinkpad Edge 14", ALC269_FIXUP_SKU_IGNORE), - SND_PCI_QUIRK(0x17aa, 0x21e9, "Thinkpad Edge 14", ALC269_FIXUP_SKU_IGNORE), SND_PCI_QUIRK(0x17aa, 0x20f2, "Thinkpad SL410/510", ALC269_FIXUP_SKU_IGNORE), + SND_PCI_QUIRK(0x17aa, 0x215e, "Thinkpad L512", ALC269_FIXUP_SKU_IGNORE), + SND_PCI_QUIRK(0x17aa, 0x21b8, "Thinkpad Edge 14", ALC269_FIXUP_SKU_IGNORE), + SND_PCI_QUIRK(0x17aa, 0x21ca, "Thinkpad L412", ALC269_FIXUP_SKU_IGNORE), + SND_PCI_QUIRK(0x17aa, 0x21e9, "Thinkpad Edge 15", ALC269_FIXUP_SKU_IGNORE), SND_PCI_QUIRK(0x1043, 0x1a13, "Asus G73Jw", ALC269_FIXUP_ASUS_G73JW), SND_PCI_QUIRK(0x17aa, 0x9e54, "LENOVO NB", ALC269_FIXUP_LENOVO_EAPD), {} -- cgit v1.2.3-18-g5258 From 8eb2d829ffea3677c21bd038f19e5d8ca6b43e36 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 9 Nov 2010 14:48:01 +0800 Subject: btrfs: Fix threshold calculation for block groups smaller than 1GB If a block group is smaller than 1GB, the extent entry threadhold calculation will always set the threshold to 0. So as free space gets fragmented, btrfs will switch to use bitmap to manage free space, but then will never switch back to extents due to this bug. Reviewed-by: Josef Bacik Signed-off-by: Li Zefan --- fs/btrfs/free-space-cache.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 60d68426695..42f4015988e 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -1016,14 +1016,18 @@ static void recalculate_thresholds(struct btrfs_block_group_cache *block_group) u64 max_bytes; u64 bitmap_bytes; u64 extent_bytes; + u64 size = block_group->key.offset; /* * The goal is to keep the total amount of memory used per 1gb of space * at or below 32k, so we need to adjust how much memory we allow to be * used by extent based free space tracking */ - max_bytes = MAX_CACHE_BYTES_PER_GIG * - (div64_u64(block_group->key.offset, 1024 * 1024 * 1024)); + if (size < 1024 * 1024 * 1024) + max_bytes = MAX_CACHE_BYTES_PER_GIG; + else + max_bytes = MAX_CACHE_BYTES_PER_GIG * + div64_u64(size, 1024 * 1024 * 1024); /* * we want to account for 1 more bitmap than what we have so we can make -- cgit v1.2.3-18-g5258 From edf6e2d1ddbac7f326b34a27adbca71ece53ccce Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 9 Nov 2010 14:50:07 +0800 Subject: btrfs: Add helper function free_bitmap() Remove some duplicated code. This prepares for the next patch. Reviewed-by: Josef Bacik Signed-off-by: Li Zefan --- fs/btrfs/free-space-cache.c | 37 ++++++++++++++++--------------------- 1 file changed, 16 insertions(+), 21 deletions(-) diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 42f4015988e..850104f0517 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -1175,6 +1175,16 @@ static void add_new_bitmap(struct btrfs_block_group_cache *block_group, recalculate_thresholds(block_group); } +static void free_bitmap(struct btrfs_block_group_cache *block_group, + struct btrfs_free_space *bitmap_info) +{ + unlink_free_space(block_group, bitmap_info); + kfree(bitmap_info->bitmap); + kfree(bitmap_info); + block_group->total_bitmaps--; + recalculate_thresholds(block_group); +} + static noinline int remove_from_bitmap(struct btrfs_block_group_cache *block_group, struct btrfs_free_space *bitmap_info, u64 *offset, u64 *bytes) @@ -1215,13 +1225,8 @@ again: if (*bytes) { struct rb_node *next = rb_next(&bitmap_info->offset_index); - if (!bitmap_info->bytes) { - unlink_free_space(block_group, bitmap_info); - kfree(bitmap_info->bitmap); - kfree(bitmap_info); - block_group->total_bitmaps--; - recalculate_thresholds(block_group); - } + if (!bitmap_info->bytes) + free_bitmap(block_group, bitmap_info); /* * no entry after this bitmap, but we still have bytes to @@ -1254,13 +1259,8 @@ again: return -EAGAIN; goto again; - } else if (!bitmap_info->bytes) { - unlink_free_space(block_group, bitmap_info); - kfree(bitmap_info->bitmap); - kfree(bitmap_info); - block_group->total_bitmaps--; - recalculate_thresholds(block_group); - } + } else if (!bitmap_info->bytes) + free_bitmap(block_group, bitmap_info); return 0; } @@ -1689,13 +1689,8 @@ u64 btrfs_find_space_for_alloc(struct btrfs_block_group_cache *block_group, ret = offset; if (entry->bitmap) { bitmap_clear_bits(block_group, entry, offset, bytes); - if (!entry->bytes) { - unlink_free_space(block_group, entry); - kfree(entry->bitmap); - kfree(entry); - block_group->total_bitmaps--; - recalculate_thresholds(block_group); - } + if (!entry->bytes) + free_bitmap(block_group, entry); } else { unlink_free_space(block_group, entry); entry->offset += bytes; -- cgit v1.2.3-18-g5258 From 70b7da304f9f9bbf1566085155895e32e775a745 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 9 Nov 2010 14:51:45 +0800 Subject: btrfs: Free fully occupied bitmap in cluster If there's no more free space in a bitmap, we should free it. Reviewed-by: Josef Bacik Signed-off-by: Li Zefan --- fs/btrfs/free-space-cache.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 850104f0517..cb0137e4047 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -1788,6 +1788,8 @@ static u64 btrfs_alloc_from_bitmap(struct btrfs_block_group_cache *block_group, ret = search_start; bitmap_clear_bits(block_group, entry, ret, bytes); + if (entry->bytes == 0) + free_bitmap(block_group, entry); out: spin_unlock(&cluster->lock); spin_unlock(&block_group->tree_lock); -- cgit v1.2.3-18-g5258 From 5e71b5d5ec07e4b3fb4c78c4e4b108ff667f123f Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 9 Nov 2010 14:55:34 +0800 Subject: btrfs: Update stats when allocating from a cluster When allocating extent entry from a cluster, we should update the free_space and free_extents fields of the block group. Reviewed-by: Josef Bacik Signed-off-by: Li Zefan --- fs/btrfs/free-space-cache.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index cb0137e4047..2974c4744d5 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -1843,15 +1843,26 @@ u64 btrfs_alloc_from_cluster(struct btrfs_block_group_cache *block_group, entry->offset += bytes; entry->bytes -= bytes; - if (entry->bytes == 0) { + if (entry->bytes == 0) rb_erase(&entry->offset_index, &cluster->root); - kfree(entry); - } break; } out: spin_unlock(&cluster->lock); + if (!ret) + return 0; + + spin_lock(&block_group->tree_lock); + + block_group->free_space -= bytes; + if (entry->bytes == 0) { + block_group->free_extents--; + kfree(entry); + } + + spin_unlock(&block_group->tree_lock); + return ret; } -- cgit v1.2.3-18-g5258 From 120d66eec0dcb966fbd03f743598b2ff2513436b Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 9 Nov 2010 14:56:50 +0800 Subject: btrfs: Add a helper try_merge_free_space() When adding a new extent, we'll firstly see if we can merge this extent to the left or/and right extent. Extract this as a helper try_merge_free_space(). As a side effect, we fix a small bug that if the new extent has non-bitmap left entry but is unmergeble, we'll directly link the extent without trying to drop it into bitmap. This also prepares for the next patch. Reviewed-by: Josef Bacik Signed-off-by: Li Zefan --- fs/btrfs/free-space-cache.c | 75 ++++++++++++++++++++++++++------------------- 1 file changed, 43 insertions(+), 32 deletions(-) diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 2974c4744d5..cf67dc3b7bf 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -1363,22 +1363,14 @@ out: return ret; } -int btrfs_add_free_space(struct btrfs_block_group_cache *block_group, - u64 offset, u64 bytes) +bool try_merge_free_space(struct btrfs_block_group_cache *block_group, + struct btrfs_free_space *info) { - struct btrfs_free_space *right_info = NULL; - struct btrfs_free_space *left_info = NULL; - struct btrfs_free_space *info = NULL; - int ret = 0; - - info = kzalloc(sizeof(struct btrfs_free_space), GFP_NOFS); - if (!info) - return -ENOMEM; - - info->offset = offset; - info->bytes = bytes; - - spin_lock(&block_group->tree_lock); + struct btrfs_free_space *left_info; + struct btrfs_free_space *right_info; + bool merged = false; + u64 offset = info->offset; + u64 bytes = info->bytes; /* * first we want to see if there is free space adjacent to the range we @@ -1392,27 +1384,11 @@ int btrfs_add_free_space(struct btrfs_block_group_cache *block_group, else left_info = tree_search_offset(block_group, offset - 1, 0, 0); - /* - * If there was no extent directly to the left or right of this new - * extent then we know we're going to have to allocate a new extent, so - * before we do that see if we need to drop this into a bitmap - */ - if ((!left_info || left_info->bitmap) && - (!right_info || right_info->bitmap)) { - ret = insert_into_bitmap(block_group, info); - - if (ret < 0) { - goto out; - } else if (ret) { - ret = 0; - goto out; - } - } - if (right_info && !right_info->bitmap) { unlink_free_space(block_group, right_info); info->bytes += right_info->bytes; kfree(right_info); + merged = true; } if (left_info && !left_info->bitmap && @@ -1421,8 +1397,43 @@ int btrfs_add_free_space(struct btrfs_block_group_cache *block_group, info->offset = left_info->offset; info->bytes += left_info->bytes; kfree(left_info); + merged = true; } + return merged; +} + +int btrfs_add_free_space(struct btrfs_block_group_cache *block_group, + u64 offset, u64 bytes) +{ + struct btrfs_free_space *info; + int ret = 0; + + info = kzalloc(sizeof(struct btrfs_free_space), GFP_NOFS); + if (!info) + return -ENOMEM; + + info->offset = offset; + info->bytes = bytes; + + spin_lock(&block_group->tree_lock); + + if (try_merge_free_space(block_group, info)) + goto link; + + /* + * There was no extent directly to the left or right of this new + * extent then we know we're going to have to allocate a new extent, so + * before we do that see if we need to drop this into a bitmap + */ + ret = insert_into_bitmap(block_group, info); + if (ret < 0) { + goto out; + } else if (ret) { + ret = 0; + goto out; + } +link: ret = link_free_space(block_group, info); if (ret) kfree(info); -- cgit v1.2.3-18-g5258 From f333adb5d64bc1c4d6099072fc341c3c8f84e0cf Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 9 Nov 2010 14:57:39 +0800 Subject: btrfs: Check mergeable free space when removing a cluster After returing extents from a cluster to the block group, some extents in the block group may be mergeable. Reviewed-by: Josef Bacik Signed-off-by: Li Zefan --- fs/btrfs/free-space-cache.c | 26 ++++++++++++++++++++------ 1 file changed, 20 insertions(+), 6 deletions(-) diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index cf67dc3b7bf..a5501edc3c9 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -987,11 +987,18 @@ tree_search_offset(struct btrfs_block_group_cache *block_group, return entry; } -static void unlink_free_space(struct btrfs_block_group_cache *block_group, - struct btrfs_free_space *info) +static inline void +__unlink_free_space(struct btrfs_block_group_cache *block_group, + struct btrfs_free_space *info) { rb_erase(&info->offset_index, &block_group->free_space_offset); block_group->free_extents--; +} + +static void unlink_free_space(struct btrfs_block_group_cache *block_group, + struct btrfs_free_space *info) +{ + __unlink_free_space(block_group, info); block_group->free_space -= info->bytes; } @@ -1364,7 +1371,7 @@ out: } bool try_merge_free_space(struct btrfs_block_group_cache *block_group, - struct btrfs_free_space *info) + struct btrfs_free_space *info, bool update_stat) { struct btrfs_free_space *left_info; struct btrfs_free_space *right_info; @@ -1385,7 +1392,10 @@ bool try_merge_free_space(struct btrfs_block_group_cache *block_group, left_info = tree_search_offset(block_group, offset - 1, 0, 0); if (right_info && !right_info->bitmap) { - unlink_free_space(block_group, right_info); + if (update_stat) + unlink_free_space(block_group, right_info); + else + __unlink_free_space(block_group, right_info); info->bytes += right_info->bytes; kfree(right_info); merged = true; @@ -1393,7 +1403,10 @@ bool try_merge_free_space(struct btrfs_block_group_cache *block_group, if (left_info && !left_info->bitmap && left_info->offset + left_info->bytes == offset) { - unlink_free_space(block_group, left_info); + if (update_stat) + unlink_free_space(block_group, left_info); + else + __unlink_free_space(block_group, left_info); info->offset = left_info->offset; info->bytes += left_info->bytes; kfree(left_info); @@ -1418,7 +1431,7 @@ int btrfs_add_free_space(struct btrfs_block_group_cache *block_group, spin_lock(&block_group->tree_lock); - if (try_merge_free_space(block_group, info)) + if (try_merge_free_space(block_group, info, true)) goto link; /* @@ -1636,6 +1649,7 @@ __btrfs_return_cluster_to_free_space( node = rb_next(&entry->offset_index); rb_erase(&entry->offset_index, &cluster->root); BUG_ON(entry->bitmap); + try_merge_free_space(block_group, entry, false); tree_insert_offset(&block_group->free_space_offset, entry->offset, &entry->offset_index, 0); } -- cgit v1.2.3-18-g5258 From 83a4d54840c88a4a45c49670f044b8c7ddeaa8c7 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Mon, 27 Dec 2010 16:19:53 +0800 Subject: Btrfs: Fix memory leak at umount fs_info, which is allocated in open_ctree(), should be freed in close_ctree(). Signed-off-by: Li Zefan --- fs/btrfs/disk-io.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index a5d2249e6da..089871e5cd5 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -2513,6 +2513,8 @@ int close_ctree(struct btrfs_root *root) kfree(fs_info->chunk_root); kfree(fs_info->dev_root); kfree(fs_info->csum_root); + kfree(fs_info); + return 0; } -- cgit v1.2.3-18-g5258 From bdc924bb4cdac92b945945c3149ab8191c92d75d Mon Sep 17 00:00:00 2001 From: Ian Kent Date: Mon, 27 Dec 2010 16:33:15 +0800 Subject: Btrfs: Fix memory leak on finding existing super We missed a memory deallocation in commit 450ba0ea. If an existing super block is found at mount and there is no error condition then the pre-allocated tree_root and fs_info are no not used and are not freeded. Signed-off-by: Ian Kent Signed-off-by: Li Zefan --- fs/btrfs/super.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 61bd79abb80..f50253c2279 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -654,6 +654,8 @@ static int btrfs_get_sb(struct file_system_type *fs_type, int flags, } btrfs_close_devices(fs_devices); + kfree(fs_info); + kfree(tree_root); } else { char b[BDEVNAME_SIZE]; -- cgit v1.2.3-18-g5258 From 3f3d0bc0df041236fad4ffa82188a6e4ef9af75e Mon Sep 17 00:00:00 2001 From: Tero Roponen Date: Mon, 27 Dec 2010 16:43:13 +0800 Subject: Btrfs: Free correct pointer after using strsep We must save and free the original kstrdup()'ed pointer because strsep() modifies its first argument. Signed-off-by: Tero Roponen Signed-off-by: Li Zefan --- fs/btrfs/super.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index f50253c2279..78ee681465a 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -277,7 +277,7 @@ static int btrfs_parse_early_options(const char *options, fmode_t flags, struct btrfs_fs_devices **fs_devices) { substring_t args[MAX_OPT_ARGS]; - char *opts, *p; + char *opts, *orig, *p; int error = 0; int intarg; @@ -291,6 +291,7 @@ static int btrfs_parse_early_options(const char *options, fmode_t flags, opts = kstrdup(options, GFP_KERNEL); if (!opts) return -ENOMEM; + orig = opts; while ((p = strsep(&opts, ",")) != NULL) { int token; @@ -326,7 +327,7 @@ static int btrfs_parse_early_options(const char *options, fmode_t flags, } out_free_opts: - kfree(opts); + kfree(orig); out: /* * If no subvolume name is specified we use the default one. Allocate -- cgit v1.2.3-18-g5258 From d0f69686c2ae775529aadc7a8acc6f13ad41de66 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Tue, 25 Jan 2011 15:46:17 +0800 Subject: Btrfs: Don't return acl info when mounting with noacl option Steps to reproduce: # mkfs.btrfs /dev/sda2 # mount /dev/sda2 /mnt # touch /mnt/file0 # setfacl -m 'u:root:x,g::x,o::x' /mnt/file0 # umount /mnt # mount /dev/sda2 -o noacl /mnt # getfacl /mnt/file0 ... user::rw- user:root:--x group::--x mask::--x other::--x The output should be: user::rw- group::--x other::--x Signed-off-by: Miao Xie Signed-off-by: Li Zefan --- fs/btrfs/acl.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/btrfs/acl.c b/fs/btrfs/acl.c index 2222d161c7b..3c52fc8afe2 100644 --- a/fs/btrfs/acl.c +++ b/fs/btrfs/acl.c @@ -37,6 +37,9 @@ static struct posix_acl *btrfs_get_acl(struct inode *inode, int type) char *value = NULL; struct posix_acl *acl; + if (!IS_POSIXACL(inode)) + return NULL; + acl = get_cached_acl(inode, type); if (acl != ACL_NOT_CACHED) return acl; @@ -82,6 +85,9 @@ static int btrfs_xattr_acl_get(struct dentry *dentry, const char *name, struct posix_acl *acl; int ret = 0; + if (!IS_POSIXACL(dentry->d_inode)) + return -EOPNOTSUPP; + acl = btrfs_get_acl(dentry->d_inode, type); if (IS_ERR(acl)) -- cgit v1.2.3-18-g5258 From b897abec032deb7cc3ce67392a1f544ac965ddea Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Wed, 26 Jan 2011 16:19:22 +0800 Subject: Btrfs: Fix memory leak in writepage fixup work fixup, which is allocated when starting page write to fix up the extent without ORDERED bit set, should be freed after this work is done. Signed-off-by: Miao Xie Signed-off-by: Li Zefan --- fs/btrfs/inode.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 5f9194438f7..3a6edc4c564 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -1544,6 +1544,7 @@ out: out_page: unlock_page(page); page_cache_release(page); + kfree(fixup); } /* -- cgit v1.2.3-18-g5258 From 4d728ec7aefdca5419d2ebfb28c147e81a4b59f4 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 26 Jan 2011 14:10:43 +0800 Subject: Btrfs: Fix file clone when source offset is not 0 Suppose: - the source extent is: [0, 100] - the src offset is 10 - the clone length is 90 - the dest offset is 0 This statement: new_key.offset = key.offset + destoff - off will produce such an extent for the dest file: [ino, BTRFS_EXTENT_DATA_KEY, -10] , which is obviously wrong. Signed-off-by: Li Zefan --- fs/btrfs/ioctl.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index f87552a1d7e..1b61dab6406 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1788,7 +1788,10 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd, memcpy(&new_key, &key, sizeof(new_key)); new_key.objectid = inode->i_ino; - new_key.offset = key.offset + destoff - off; + if (off <= key.offset) + new_key.offset = key.offset + destoff - off; + else + new_key.offset = destoff; trans = btrfs_start_transaction(root, 1); if (IS_ERR(trans)) { -- cgit v1.2.3-18-g5258 From 509e7861d8a5e26bb07b5a3a13e2b9e442283631 Mon Sep 17 00:00:00 2001 From: "Cho, Yu-Chen" Date: Wed, 26 Jan 2011 17:10:59 +0800 Subject: Bluetooth: add Atheros BT AR9285 fw supported Add the btusb.c blacklist [03f0:311d] for Atheros AR9285 Malbec BT and add to ath3k.c ath3-1.fw (md5:1211fa34c09e10ba48381586b7c3883d) supported this device. Signed-off-by: Cho, Yu-Chen Signed-off-by: Gustavo F. Padovan --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 3 +++ 2 files changed, 5 insertions(+) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index a126e614601..333c21289d9 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -39,6 +39,8 @@ static struct usb_device_id ath3k_table[] = { /* Atheros AR3011 with sflash firmware*/ { USB_DEVICE(0x0CF3, 0x3002) }, + /* Atheros AR9285 Malbec with sflash firmware */ + { USB_DEVICE(0x03F0, 0x311D) }, { } /* Terminating entry */ }; diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 1da773f899a..4cefa91e6c3 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -102,6 +102,9 @@ static struct usb_device_id blacklist_table[] = { /* Atheros 3011 with sflash firmware */ { USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE }, + /* Atheros AR9285 Malbec with sflash firmware */ + { USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE }, + /* Broadcom BCM2035 */ { USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU }, { USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU }, -- cgit v1.2.3-18-g5258 From 1ea1bdf7faa4d0b5293e605f2e1ef1c2c59f6b53 Mon Sep 17 00:00:00 2001 From: Ari Kauppi Date: Thu, 20 Jan 2011 13:57:18 -0500 Subject: oprofile: Fix usage of CONFIG_HW_PERF_EVENTS for oprofile_perf_init and friends The implementations are flagged in Makefile with CONFIG_HW_PERF_EVENTS instead of CONFIG_PERF_EVENTS. Cc: stable@kernel.org # 37.x Signed-off-by: Ari Kauppi Signed-off-by: Robert Richter --- include/linux/oprofile.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/oprofile.h b/include/linux/oprofile.h index 32fb81212fd..54c83827f91 100644 --- a/include/linux/oprofile.h +++ b/include/linux/oprofile.h @@ -186,10 +186,10 @@ int oprofile_add_data(struct op_entry *entry, unsigned long val); int oprofile_add_data64(struct op_entry *entry, u64 val); int oprofile_write_commit(struct op_entry *entry); -#ifdef CONFIG_PERF_EVENTS +#ifdef CONFIG_HW_PERF_EVENTS int __init oprofile_perf_init(struct oprofile_operations *ops); void oprofile_perf_exit(void); char *op_name_from_perf_id(void); -#endif /* CONFIG_PERF_EVENTS */ +#endif /* CONFIG_HW_PERF_EVENTS */ #endif /* OPROFILE_H */ -- cgit v1.2.3-18-g5258 From d14dd7e20d5e526557f5d3cfef4046a642f80924 Mon Sep 17 00:00:00 2001 From: Ari Kauppi Date: Thu, 20 Jan 2011 13:57:19 -0500 Subject: ARM: oprofile: Fix backtraces in timer mode Always allow backtraces when using oprofile on ARM, even if a PMU isn't present. Restores functionality originally introduced in commit 1b7b56982fdcd9d85effd76f3928cf5d6eb26155 ("oprofile: Always allow backtraces on ARM") by Richard Purdie. It is not that obvious, but there is now only one oprofile_arch_init() function. So the .backtrace callback is available also in timer mode. Implemented by removing code and using stubs for oprofile_perf_{init, exit} provided by . This allows cleaning of other architecture specific implementations too. Cc: stable@kernel.org # 37.x Signed-off-by: Ari Kauppi Acked-by: Will Deacon Signed-off-by: Robert Richter --- arch/arm/oprofile/common.c | 12 ++---------- include/linux/oprofile.h | 9 +++++++++ 2 files changed, 11 insertions(+), 10 deletions(-) diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c index 8aa974491df..2b663918c46 100644 --- a/arch/arm/oprofile/common.c +++ b/arch/arm/oprofile/common.c @@ -10,8 +10,6 @@ */ #include -#include -#include #include #include #include @@ -46,6 +44,7 @@ char *op_name_from_perf_id(void) return NULL; } } +#endif static int report_trace(struct stackframe *frame, void *d) { @@ -111,6 +110,7 @@ static void arm_backtrace(struct pt_regs * const regs, unsigned int depth) int __init oprofile_arch_init(struct oprofile_operations *ops) { + /* provide backtrace support also in timer mode: */ ops->backtrace = arm_backtrace; return oprofile_perf_init(ops); @@ -120,11 +120,3 @@ void __exit oprofile_arch_exit(void) { oprofile_perf_exit(); } -#else -int __init oprofile_arch_init(struct oprofile_operations *ops) -{ - pr_info("oprofile: hardware counters not available\n"); - return -ENODEV; -} -void __exit oprofile_arch_exit(void) {} -#endif /* CONFIG_HW_PERF_EVENTS */ diff --git a/include/linux/oprofile.h b/include/linux/oprofile.h index 54c83827f91..1ca64113efe 100644 --- a/include/linux/oprofile.h +++ b/include/linux/oprofile.h @@ -16,6 +16,8 @@ #include #include #include +#include +#include #include /* Each escaped entry is prefixed by ESCAPE_CODE @@ -190,6 +192,13 @@ int oprofile_write_commit(struct op_entry *entry); int __init oprofile_perf_init(struct oprofile_operations *ops); void oprofile_perf_exit(void); char *op_name_from_perf_id(void); +#else +static inline int __init oprofile_perf_init(struct oprofile_operations *ops) +{ + pr_info("oprofile: hardware counters not available\n"); + return -ENODEV; +} +static inline void oprofile_perf_exit(void) { } #endif /* CONFIG_HW_PERF_EVENTS */ #endif /* OPROFILE_H */ -- cgit v1.2.3-18-g5258 From c73e0c83f512012e7c357e516a0d7c0a832bfa34 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Wed, 26 Jan 2011 16:39:37 +0200 Subject: ASoC: Fix module refcount for auxiliary devices Commit f6c2ed5 "ASoC: Fix the device references to codec and platform drivers" moved codec driver refcount increments from soc_bind_dai_link into soc_probe_codec. However, the commit didn't remove try_module_get from soc_probe_aux_dev so the auxiliary device reference counts are incremented twice as the soc_probe_codec is called from soc_probe_aux_dev too. Signed-off-by: Jarkko Nikula Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/soc-core.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index bac7291b6ff..c4b60610beb 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1664,9 +1664,6 @@ static int soc_probe_aux_dev(struct snd_soc_card *card, int num) goto out; found: - if (!try_module_get(codec->dev->driver->owner)) - return -ENODEV; - ret = soc_probe_codec(card, codec); if (ret < 0) return ret; -- cgit v1.2.3-18-g5258 From 34c92049ac15dcb731dc455d165b4c3c1df569cf Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Wed, 26 Jan 2011 13:13:10 -0800 Subject: tg3: Use new VLAN code This patch pivots the tg3 driver to the new VLAN infrastructure. All references to vlgrp have been removed. The driver still attempts to disable VLAN tag stripping if CONFIG_VLAN_8021Q or CONFIG_VLAN_8021Q_MODULE is not defined. Signed-off-by: Matt Carlson Reviewed-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 95 ++++++------------------------------------------------- drivers/net/tg3.h | 3 -- 2 files changed, 10 insertions(+), 88 deletions(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 7841a8f6999..93b32d36661 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -60,12 +60,6 @@ #define BAR_0 0 #define BAR_2 2 -#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) -#define TG3_VLAN_TAG_USED 1 -#else -#define TG3_VLAN_TAG_USED 0 -#endif - #include "tg3.h" #define DRV_MODULE_NAME "tg3" @@ -134,9 +128,6 @@ TG3_TX_RING_SIZE) #define NEXT_TX(N) (((N) + 1) & (TG3_TX_RING_SIZE - 1)) -#define TG3_RX_DMA_ALIGN 16 -#define TG3_RX_HEADROOM ALIGN(VLAN_HLEN, TG3_RX_DMA_ALIGN) - #define TG3_DMA_BYTE_ENAB 64 #define TG3_RX_STD_DMA_SZ 1536 @@ -4722,8 +4713,6 @@ static int tg3_rx(struct tg3_napi *tnapi, int budget) struct sk_buff *skb; dma_addr_t dma_addr; u32 opaque_key, desc_idx, *post_ptr; - bool hw_vlan __maybe_unused = false; - u16 vtag __maybe_unused = 0; desc_idx = desc->opaque & RXD_OPAQUE_INDEX_MASK; opaque_key = desc->opaque & RXD_OPAQUE_RING_MASK; @@ -4782,12 +4771,12 @@ static int tg3_rx(struct tg3_napi *tnapi, int budget) tg3_recycle_rx(tnapi, tpr, opaque_key, desc_idx, *post_ptr); - copy_skb = netdev_alloc_skb(tp->dev, len + VLAN_HLEN + + copy_skb = netdev_alloc_skb(tp->dev, len + TG3_RAW_IP_ALIGN); if (copy_skb == NULL) goto drop_it_no_recycle; - skb_reserve(copy_skb, TG3_RAW_IP_ALIGN + VLAN_HLEN); + skb_reserve(copy_skb, TG3_RAW_IP_ALIGN); skb_put(copy_skb, len); pci_dma_sync_single_for_cpu(tp->pdev, dma_addr, len, PCI_DMA_FROMDEVICE); skb_copy_from_linear_data(skb, copy_skb->data, len); @@ -4814,30 +4803,11 @@ static int tg3_rx(struct tg3_napi *tnapi, int budget) } if (desc->type_flags & RXD_FLAG_VLAN && - !(tp->rx_mode & RX_MODE_KEEP_VLAN_TAG)) { - vtag = desc->err_vlan & RXD_VLAN_MASK; -#if TG3_VLAN_TAG_USED - if (tp->vlgrp) - hw_vlan = true; - else -#endif - { - struct vlan_ethhdr *ve = (struct vlan_ethhdr *) - __skb_push(skb, VLAN_HLEN); - - memmove(ve, skb->data + VLAN_HLEN, - ETH_ALEN * 2); - ve->h_vlan_proto = htons(ETH_P_8021Q); - ve->h_vlan_TCI = htons(vtag); - } - } + !(tp->rx_mode & RX_MODE_KEEP_VLAN_TAG)) + __vlan_hwaccel_put_tag(skb, + desc->err_vlan & RXD_VLAN_MASK); -#if TG3_VLAN_TAG_USED - if (hw_vlan) - vlan_gro_receive(&tnapi->napi, tp->vlgrp, vtag, skb); - else -#endif - napi_gro_receive(&tnapi->napi, skb); + napi_gro_receive(&tnapi->napi, skb); received++; budget--; @@ -5740,11 +5710,9 @@ static netdev_tx_t tg3_start_xmit(struct sk_buff *skb, base_flags |= TXD_FLAG_TCPUDP_CSUM; } -#if TG3_VLAN_TAG_USED if (vlan_tx_tag_present(skb)) base_flags |= (TXD_FLAG_VLAN | (vlan_tx_tag_get(skb) << 16)); -#endif len = skb_headlen(skb); @@ -5986,11 +5954,10 @@ static netdev_tx_t tg3_start_xmit_dma_bug(struct sk_buff *skb, } } } -#if TG3_VLAN_TAG_USED + if (vlan_tx_tag_present(skb)) base_flags |= (TXD_FLAG_VLAN | (vlan_tx_tag_get(skb) << 16)); -#endif if ((tp->tg3_flags3 & TG3_FLG3_USE_JUMBO_BDFLAG) && !mss && skb->len > VLAN_ETH_FRAME_LEN) @@ -9532,17 +9499,10 @@ static void __tg3_set_rx_mode(struct net_device *dev) rx_mode = tp->rx_mode & ~(RX_MODE_PROMISC | RX_MODE_KEEP_VLAN_TAG); +#if !defined(CONFIG_VLAN_8021Q) && !defined(CONFIG_VLAN_8021Q_MODULE) /* When ASF is in use, we always keep the RX_MODE_KEEP_VLAN_TAG * flag clear. */ -#if TG3_VLAN_TAG_USED - if (!tp->vlgrp && - !(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) - rx_mode |= RX_MODE_KEEP_VLAN_TAG; -#else - /* By definition, VLAN is disabled always in this - * case. - */ if (!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) rx_mode |= RX_MODE_KEEP_VLAN_TAG; #endif @@ -11230,31 +11190,6 @@ static int tg3_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) return -EOPNOTSUPP; } -#if TG3_VLAN_TAG_USED -static void tg3_vlan_rx_register(struct net_device *dev, struct vlan_group *grp) -{ - struct tg3 *tp = netdev_priv(dev); - - if (!netif_running(dev)) { - tp->vlgrp = grp; - return; - } - - tg3_netif_stop(tp); - - tg3_full_lock(tp, 0); - - tp->vlgrp = grp; - - /* Update RX_MODE_KEEP_VLAN_TAG bit in RX_MODE register. */ - __tg3_set_rx_mode(dev); - - tg3_netif_start(tp); - - tg3_full_unlock(tp); -} -#endif - static int tg3_get_coalesce(struct net_device *dev, struct ethtool_coalesce *ec) { struct tg3 *tp = netdev_priv(dev); @@ -13066,9 +13001,7 @@ static struct pci_dev * __devinit tg3_find_peer(struct tg3 *); static void inline vlan_features_add(struct net_device *dev, unsigned long flags) { -#if TG3_VLAN_TAG_USED dev->vlan_features |= flags; -#endif } static inline u32 tg3_rx_ret_ring_size(struct tg3 *tp) @@ -13861,11 +13794,11 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) else tp->tg3_flags &= ~TG3_FLAG_POLL_SERDES; - tp->rx_offset = NET_IP_ALIGN + TG3_RX_HEADROOM; + tp->rx_offset = NET_IP_ALIGN; tp->rx_copy_thresh = TG3_RX_COPY_THRESHOLD; if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701 && (tp->tg3_flags & TG3_FLAG_PCIX_MODE) != 0) { - tp->rx_offset -= NET_IP_ALIGN; + tp->rx_offset = 0; #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS tp->rx_copy_thresh = ~(u16)0; #endif @@ -14629,9 +14562,6 @@ static const struct net_device_ops tg3_netdev_ops = { .ndo_do_ioctl = tg3_ioctl, .ndo_tx_timeout = tg3_tx_timeout, .ndo_change_mtu = tg3_change_mtu, -#if TG3_VLAN_TAG_USED - .ndo_vlan_rx_register = tg3_vlan_rx_register, -#endif #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = tg3_poll_controller, #endif @@ -14648,9 +14578,6 @@ static const struct net_device_ops tg3_netdev_ops_dma_bug = { .ndo_do_ioctl = tg3_ioctl, .ndo_tx_timeout = tg3_tx_timeout, .ndo_change_mtu = tg3_change_mtu, -#if TG3_VLAN_TAG_USED - .ndo_vlan_rx_register = tg3_vlan_rx_register, -#endif #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = tg3_poll_controller, #endif @@ -14700,9 +14627,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, SET_NETDEV_DEV(dev, &pdev->dev); -#if TG3_VLAN_TAG_USED dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; -#endif tp = netdev_priv(dev); tp->pdev = pdev; diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index d62c8d937c8..f528243e1a4 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -2808,9 +2808,6 @@ struct tg3 { u32 rx_std_max_post; u32 rx_offset; u32 rx_pkt_map_sz; -#if TG3_VLAN_TAG_USED - struct vlan_group *vlgrp; -#endif /* begin "everything else" cacheline(s) section */ -- cgit v1.2.3-18-g5258 From 7cc2edb83447775a34ed3bf9d29d8295a434b523 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 26 Jan 2011 13:41:03 -0800 Subject: xfrm6: Don't forget to propagate peer into ipsec route. Like ipv4, we have to propagate the ipv6 route peer into the ipsec top-level route during instantiation. Signed-off-by: David S. Miller --- net/ipv6/xfrm6_policy.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c index 7e74023ea6e..da87428681c 100644 --- a/net/ipv6/xfrm6_policy.c +++ b/net/ipv6/xfrm6_policy.c @@ -98,6 +98,10 @@ static int xfrm6_fill_dst(struct xfrm_dst *xdst, struct net_device *dev, if (!xdst->u.rt6.rt6i_idev) return -ENODEV; + xdst->u.rt6.rt6i_peer = rt->rt6i_peer; + if (rt->rt6i_peer) + atomic_inc(&rt->rt6i_peer->refcnt); + /* Sheit... I remember I did this right. Apparently, * it was magically lost, so this code needs audit */ xdst->u.rt6.rt6i_flags = rt->rt6i_flags & (RTF_ANYCAST | @@ -216,6 +220,8 @@ static void xfrm6_dst_destroy(struct dst_entry *dst) if (likely(xdst->u.rt6.rt6i_idev)) in6_dev_put(xdst->u.rt6.rt6i_idev); + if (likely(xdst->u.rt6.rt6i_peer)) + inet_putpeer(xdst->u.rt6.rt6i_peer); xfrm_dst_destroy(xdst); } -- cgit v1.2.3-18-g5258 From 5138826b52f8bc441770069b1b305e1d1426ae9e Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 25 Jan 2011 22:14:50 +0000 Subject: cnic: Fix big endian bug The chip's page tables did not set up properly on big endian machines, causing EEH errors on PPC machines. Reported-by: Breno Leitao Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/cnic.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c index 263a2944566..7ff170cbc7d 100644 --- a/drivers/net/cnic.c +++ b/drivers/net/cnic.c @@ -699,13 +699,13 @@ static void cnic_free_dma(struct cnic_dev *dev, struct cnic_dma *dma) static void cnic_setup_page_tbl(struct cnic_dev *dev, struct cnic_dma *dma) { int i; - u32 *page_table = dma->pgtbl; + __le32 *page_table = (__le32 *) dma->pgtbl; for (i = 0; i < dma->num_pages; i++) { /* Each entry needs to be in big endian format. */ - *page_table = (u32) ((u64) dma->pg_map_arr[i] >> 32); + *page_table = cpu_to_le32((u64) dma->pg_map_arr[i] >> 32); page_table++; - *page_table = (u32) dma->pg_map_arr[i]; + *page_table = cpu_to_le32(dma->pg_map_arr[i] & 0xffffffff); page_table++; } } @@ -713,13 +713,13 @@ static void cnic_setup_page_tbl(struct cnic_dev *dev, struct cnic_dma *dma) static void cnic_setup_page_tbl_le(struct cnic_dev *dev, struct cnic_dma *dma) { int i; - u32 *page_table = dma->pgtbl; + __le32 *page_table = (__le32 *) dma->pgtbl; for (i = 0; i < dma->num_pages; i++) { /* Each entry needs to be in little endian format. */ - *page_table = dma->pg_map_arr[i] & 0xffffffff; + *page_table = cpu_to_le32(dma->pg_map_arr[i] & 0xffffffff); page_table++; - *page_table = (u32) ((u64) dma->pg_map_arr[i] >> 32); + *page_table = cpu_to_le32((u64) dma->pg_map_arr[i] >> 32); page_table++; } } -- cgit v1.2.3-18-g5258 From 4bb9ebc78097376b3734c6d3001a96aecac0f7bb Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 25 Jan 2011 22:14:51 +0000 Subject: bnx2: Eliminate AER error messages on systems not supporting it On PPC for example, AER is not supported and we see unnecessary AER error message without this patch: bnx2 0003:01:00.1: pci_cleanup_aer_uncorrect_error_status failed 0xfffffffb Reported-by: Breno Leitao Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 17 +++++++++-------- drivers/net/bnx2.h | 1 + 2 files changed, 10 insertions(+), 8 deletions(-) diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 99e7652e216..0ba59d5aeb7 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -7966,11 +7966,8 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) /* AER (Advanced Error Reporting) hooks */ err = pci_enable_pcie_error_reporting(pdev); - if (err) { - dev_err(&pdev->dev, "pci_enable_pcie_error_reporting " - "failed 0x%x\n", err); - /* non-fatal, continue */ - } + if (!err) + bp->flags |= BNX2_FLAG_AER_ENABLED; } else { bp->pcix_cap = pci_find_capability(pdev, PCI_CAP_ID_PCIX); @@ -8233,8 +8230,10 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) return 0; err_out_unmap: - if (bp->flags & BNX2_FLAG_PCIE) + if (bp->flags & BNX2_FLAG_AER_ENABLED) { pci_disable_pcie_error_reporting(pdev); + bp->flags &= ~BNX2_FLAG_AER_ENABLED; + } if (bp->regview) { iounmap(bp->regview); @@ -8422,8 +8421,10 @@ bnx2_remove_one(struct pci_dev *pdev) kfree(bp->temp_stats_blk); - if (bp->flags & BNX2_FLAG_PCIE) + if (bp->flags & BNX2_FLAG_AER_ENABLED) { pci_disable_pcie_error_reporting(pdev); + bp->flags &= ~BNX2_FLAG_AER_ENABLED; + } free_netdev(dev); @@ -8539,7 +8540,7 @@ static pci_ers_result_t bnx2_io_slot_reset(struct pci_dev *pdev) } rtnl_unlock(); - if (!(bp->flags & BNX2_FLAG_PCIE)) + if (!(bp->flags & BNX2_FLAG_AER_ENABLED)) return result; err = pci_cleanup_aer_uncorrect_error_status(pdev); diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h index 5488a2e82fe..f459fb2f9ad 100644 --- a/drivers/net/bnx2.h +++ b/drivers/net/bnx2.h @@ -6741,6 +6741,7 @@ struct bnx2 { #define BNX2_FLAG_JUMBO_BROKEN 0x00000800 #define BNX2_FLAG_CAN_KEEP_VLAN 0x00001000 #define BNX2_FLAG_BROKEN_STATS 0x00002000 +#define BNX2_FLAG_AER_ENABLED 0x00004000 struct bnx2_napi bnx2_napi[BNX2_MAX_MSIX_VEC]; -- cgit v1.2.3-18-g5258 From 7db37c5e6575b229a5051be1d3ef15257ae0ba5d Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Thu, 27 Jan 2011 12:02:00 +1100 Subject: xfs: fix log ticket leak on forced shutdown. The kmemleak detector shows this after test 139: unreferenced object 0xffff880079b88bb0 (size 264): comm "xfs_io", pid 4904, jiffies 4294909382 (age 276.824s) hex dump (first 32 bytes): 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... ff ff ff ff ff ff ff ff 48 7b c9 82 ff ff ff ff ........H{...... backtrace: [] kmemleak_alloc+0x2d/0x60 [] kmem_cache_alloc+0x13f/0x2b0 [] kmem_zone_alloc+0x77/0xf0 [] kmem_zone_zalloc+0x1e/0x50 [] xlog_ticket_alloc+0x34/0x170 [] xlog_cil_push+0xa4/0x3f0 [] xlog_cil_force_lsn+0x15a/0x160 [] _xfs_log_force_lsn+0x75/0x2d0 [] _xfs_trans_commit+0x2bd/0x2f0 [] xfs_iomap_write_allocate+0x1ad/0x350 [] xfs_map_blocks+0x21f/0x370 [] xfs_vm_writepage+0x1c7/0x550 [] __writepage+0x1a/0x50 [] write_cache_pages+0x1c2/0x4c0 [] generic_writepages+0x27/0x30 [] xfs_vm_writepages+0x5d/0x80 By inspection, the leak occurs when xlog_write() returns and error and we jump to the abort path without dropping the reference on the active ticket. Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig Reviewed-by: Alex Elder --- fs/xfs/xfs_log_cil.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/fs/xfs/xfs_log_cil.c b/fs/xfs/xfs_log_cil.c index 9dc8125d04e..c7eac5acbfe 100644 --- a/fs/xfs/xfs_log_cil.c +++ b/fs/xfs/xfs_log_cil.c @@ -543,7 +543,7 @@ xlog_cil_push( error = xlog_write(log, &lvhdr, tic, &ctx->start_lsn, NULL, 0); if (error) - goto out_abort; + goto out_abort_free_ticket; /* * now that we've written the checkpoint into the log, strictly @@ -569,8 +569,9 @@ restart: } spin_unlock(&cil->xc_cil_lock); + /* xfs_log_done always frees the ticket on error. */ commit_lsn = xfs_log_done(log->l_mp, tic, &commit_iclog, 0); - if (error || commit_lsn == -1) + if (commit_lsn == -1) goto out_abort; /* attach all the transactions w/ busy extents to iclog */ @@ -600,6 +601,8 @@ out_free_ticket: kmem_free(new_ctx); return 0; +out_abort_free_ticket: + xfs_log_ticket_put(tic); out_abort: xlog_cil_committed(ctx, XFS_LI_ABORTED); return XFS_ERROR(EIO); -- cgit v1.2.3-18-g5258 From 6bba2e116808ca12e30c8d88dfedabf8b8d67390 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Wed, 26 Jan 2011 17:51:03 -0500 Subject: radeon/kms: fix dp displayport mode validation Check if there is a big enough dp clock & enough dp lane to drive the video mode provided. Signed-off-by: Jerome Glisse Reviewed-By: Alex Deucher Cc: Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_dp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c index 4e7778d44b8..695de9a3850 100644 --- a/drivers/gpu/drm/radeon/atombios_dp.c +++ b/drivers/gpu/drm/radeon/atombios_dp.c @@ -187,9 +187,9 @@ static int dp_link_clock_for_mode_clock(u8 dpcd[DP_DPCD_SIZE], int mode_clock) int dp_mode_valid(u8 dpcd[DP_DPCD_SIZE], int mode_clock) { int lanes = dp_lanes_for_mode_clock(dpcd, mode_clock); - int bw = dp_lanes_for_mode_clock(dpcd, mode_clock); + int dp_clock = dp_link_clock_for_mode_clock(dpcd, mode_clock); - if ((lanes == 0) || (bw == 0)) + if ((lanes == 0) || (dp_clock == 0)) return MODE_CLOCK_HIGH; return MODE_OK; -- cgit v1.2.3-18-g5258 From 9453d621186426500aa50049dfa0a8b15c86201d Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 24 Jan 2011 22:25:48 -0500 Subject: drm/radeon/kms: only enable HDMI mode if radeon audio is enabled Force DVI mode if the user specifies radeon.audio=0. The driver doesn't handle HDMI mode properly in some cases. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=27731 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_encoders.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 8fd184286c0..5e90984d5ad 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -641,7 +641,7 @@ atombios_get_encoder_mode(struct drm_encoder *encoder) switch (connector->connector_type) { case DRM_MODE_CONNECTOR_DVII: case DRM_MODE_CONNECTOR_HDMIB: /* HDMI-B is basically DL-DVI; analog works fine */ - if (drm_detect_monitor_audio(radeon_connector->edid)) { + if (drm_detect_monitor_audio(radeon_connector->edid) && radeon_audio) { /* fix me */ if (ASIC_IS_DCE4(rdev)) return ATOM_ENCODER_MODE_DVI; @@ -655,7 +655,7 @@ atombios_get_encoder_mode(struct drm_encoder *encoder) case DRM_MODE_CONNECTOR_DVID: case DRM_MODE_CONNECTOR_HDMIA: default: - if (drm_detect_monitor_audio(radeon_connector->edid)) { + if (drm_detect_monitor_audio(radeon_connector->edid) && radeon_audio) { /* fix me */ if (ASIC_IS_DCE4(rdev)) return ATOM_ENCODER_MODE_DVI; @@ -673,7 +673,7 @@ atombios_get_encoder_mode(struct drm_encoder *encoder) if ((dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT) || (dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_eDP)) return ATOM_ENCODER_MODE_DP; - else if (drm_detect_monitor_audio(radeon_connector->edid)) { + else if (drm_detect_monitor_audio(radeon_connector->edid) && radeon_audio) { /* fix me */ if (ASIC_IS_DCE4(rdev)) return ATOM_ENCODER_MODE_DVI; -- cgit v1.2.3-18-g5258 From d75ee3be44380040b9d2c7925298dc52e049768d Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 24 Jan 2011 23:24:59 -0500 Subject: drm/radeon/kms: clean up some magic numbers Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 10 +++++----- drivers/gpu/drm/radeon/r300.c | 7 +++++-- drivers/gpu/drm/radeon/r420.c | 2 +- drivers/gpu/drm/radeon/r520.c | 4 ++-- drivers/gpu/drm/radeon/radeon_reg.h | 2 ++ drivers/gpu/drm/radeon/rs400.c | 15 +++++++++------ drivers/gpu/drm/radeon/rv515.c | 10 +++++----- 7 files changed, 29 insertions(+), 21 deletions(-) diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 5968dde243e..5f15820efe1 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -1031,8 +1031,8 @@ int r100_cp_init(struct radeon_device *rdev, unsigned ring_size) WREG32(RADEON_CP_CSQ_MODE, REG_SET(RADEON_INDIRECT2_START, indirect2_start) | REG_SET(RADEON_INDIRECT1_START, indirect1_start)); - WREG32(0x718, 0); - WREG32(0x744, 0x00004D4D); + WREG32(RADEON_CP_RB_WPTR_DELAY, 0); + WREG32(RADEON_CP_CSQ_MODE, 0x00004D4D); WREG32(RADEON_CP_CSQ_CNTL, RADEON_CSQ_PRIBM_INDBM); radeon_ring_start(rdev); r = radeon_ring_test(rdev); @@ -2347,10 +2347,10 @@ void r100_vga_set_state(struct radeon_device *rdev, bool state) temp = RREG32(RADEON_CONFIG_CNTL); if (state == false) { - temp &= ~(1<<8); - temp |= (1<<9); + temp &= ~RADEON_CFG_VGA_RAM_EN; + temp |= RADEON_CFG_VGA_IO_DIS; } else { - temp &= ~(1<<9); + temp &= ~RADEON_CFG_VGA_IO_DIS; } WREG32(RADEON_CONFIG_CNTL, temp); } diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index cf862ca580b..55fe5ba7def 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -69,6 +69,9 @@ void rv370_pcie_gart_tlb_flush(struct radeon_device *rdev) mb(); } +#define R300_PTE_WRITEABLE (1 << 2) +#define R300_PTE_READABLE (1 << 3) + int rv370_pcie_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr) { void __iomem *ptr = (void *)rdev->gart.table.vram.ptr; @@ -78,7 +81,7 @@ int rv370_pcie_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr) } addr = (lower_32_bits(addr) >> 8) | ((upper_32_bits(addr) & 0xff) << 24) | - 0xc; + R300_PTE_WRITEABLE | R300_PTE_READABLE; /* on x86 we want this to be CPU endian, on powerpc * on powerpc without HW swappers, it'll get swapped on way * into VRAM - so no need for cpu_to_le32 on VRAM tables */ @@ -135,7 +138,7 @@ int rv370_pcie_gart_enable(struct radeon_device *rdev) WREG32_PCIE(RADEON_PCIE_TX_DISCARD_RD_ADDR_LO, rdev->mc.vram_start); WREG32_PCIE(RADEON_PCIE_TX_DISCARD_RD_ADDR_HI, 0); /* Clear error */ - WREG32_PCIE(0x18, 0); + WREG32_PCIE(RADEON_PCIE_TX_GART_ERROR, 0); tmp = RREG32_PCIE(RADEON_PCIE_TX_GART_CNTL); tmp |= RADEON_PCIE_TX_GART_EN; tmp |= RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_DISCARD; diff --git a/drivers/gpu/drm/radeon/r420.c b/drivers/gpu/drm/radeon/r420.c index c387346f93a..0b59ed7c7d2 100644 --- a/drivers/gpu/drm/radeon/r420.c +++ b/drivers/gpu/drm/radeon/r420.c @@ -96,7 +96,7 @@ void r420_pipes_init(struct radeon_device *rdev) "programming pipes. Bad things might happen.\n"); } /* get max number of pipes */ - gb_pipe_select = RREG32(0x402C); + gb_pipe_select = RREG32(R400_GB_PIPE_SELECT); num_pipes = ((gb_pipe_select >> 12) & 3) + 1; /* SE chips have 1 pipe */ diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c index 3c8677f9e38..2ce80d97656 100644 --- a/drivers/gpu/drm/radeon/r520.c +++ b/drivers/gpu/drm/radeon/r520.c @@ -79,8 +79,8 @@ static void r520_gpu_init(struct radeon_device *rdev) WREG32(0x4128, 0xFF); } r420_pipes_init(rdev); - gb_pipe_select = RREG32(0x402C); - tmp = RREG32(0x170C); + gb_pipe_select = RREG32(R400_GB_PIPE_SELECT); + tmp = RREG32(R300_DST_PIPE_CONFIG); pipe_select_current = (tmp >> 2) & 3; tmp = (1 << pipe_select_current) | (((gb_pipe_select >> 8) & 0xF) << 4); diff --git a/drivers/gpu/drm/radeon/radeon_reg.h b/drivers/gpu/drm/radeon/radeon_reg.h index 3cd4dace57c..ec93a75369e 100644 --- a/drivers/gpu/drm/radeon/radeon_reg.h +++ b/drivers/gpu/drm/radeon/radeon_reg.h @@ -375,6 +375,8 @@ #define RADEON_CONFIG_APER_SIZE 0x0108 #define RADEON_CONFIG_BONDS 0x00e8 #define RADEON_CONFIG_CNTL 0x00e0 +# define RADEON_CFG_VGA_RAM_EN (1 << 8) +# define RADEON_CFG_VGA_IO_DIS (1 << 9) # define RADEON_CFG_ATI_REV_A11 (0 << 16) # define RADEON_CFG_ATI_REV_A12 (1 << 16) # define RADEON_CFG_ATI_REV_A13 (2 << 16) diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c index 5512e4e5e63..c76283d9eb3 100644 --- a/drivers/gpu/drm/radeon/rs400.c +++ b/drivers/gpu/drm/radeon/rs400.c @@ -203,6 +203,9 @@ void rs400_gart_fini(struct radeon_device *rdev) radeon_gart_table_ram_free(rdev); } +#define RS400_PTE_WRITEABLE (1 << 2) +#define RS400_PTE_READABLE (1 << 3) + int rs400_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr) { uint32_t entry; @@ -213,7 +216,7 @@ int rs400_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr) entry = (lower_32_bits(addr) & PAGE_MASK) | ((upper_32_bits(addr) & 0xff) << 4) | - 0xc; + RS400_PTE_WRITEABLE | RS400_PTE_READABLE; entry = cpu_to_le32(entry); rdev->gart.table.ram.ptr[i] = entry; return 0; @@ -226,8 +229,8 @@ int rs400_mc_wait_for_idle(struct radeon_device *rdev) for (i = 0; i < rdev->usec_timeout; i++) { /* read MC_STATUS */ - tmp = RREG32(0x0150); - if (tmp & (1 << 2)) { + tmp = RREG32(RADEON_MC_STATUS); + if (tmp & RADEON_MC_IDLE) { return 0; } DRM_UDELAY(1); @@ -241,7 +244,7 @@ void rs400_gpu_init(struct radeon_device *rdev) r420_pipes_init(rdev); if (rs400_mc_wait_for_idle(rdev)) { printk(KERN_WARNING "rs400: Failed to wait MC idle while " - "programming pipes. Bad things might happen. %08x\n", RREG32(0x150)); + "programming pipes. Bad things might happen. %08x\n", RREG32(RADEON_MC_STATUS)); } } @@ -300,9 +303,9 @@ static int rs400_debugfs_gart_info(struct seq_file *m, void *data) seq_printf(m, "MCCFG_AGP_BASE_2 0x%08x\n", tmp); tmp = RREG32_MC(RS690_MCCFG_AGP_LOCATION); seq_printf(m, "MCCFG_AGP_LOCATION 0x%08x\n", tmp); - tmp = RREG32_MC(0x100); + tmp = RREG32_MC(RS690_MCCFG_FB_LOCATION); seq_printf(m, "MCCFG_FB_LOCATION 0x%08x\n", tmp); - tmp = RREG32(0x134); + tmp = RREG32(RS690_HDP_FB_LOCATION); seq_printf(m, "HDP_FB_LOCATION 0x%08x\n", tmp); } else { tmp = RREG32(RADEON_AGP_BASE); diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c index 5d569f41f4a..64b57af9371 100644 --- a/drivers/gpu/drm/radeon/rv515.c +++ b/drivers/gpu/drm/radeon/rv515.c @@ -69,13 +69,13 @@ void rv515_ring_start(struct radeon_device *rdev) ISYNC_CPSCRATCH_IDLEGUI); radeon_ring_write(rdev, PACKET0(WAIT_UNTIL, 0)); radeon_ring_write(rdev, WAIT_2D_IDLECLEAN | WAIT_3D_IDLECLEAN); - radeon_ring_write(rdev, PACKET0(0x170C, 0)); - radeon_ring_write(rdev, 1 << 31); + radeon_ring_write(rdev, PACKET0(R300_DST_PIPE_CONFIG, 0)); + radeon_ring_write(rdev, R300_PIPE_AUTO_CONFIG); radeon_ring_write(rdev, PACKET0(GB_SELECT, 0)); radeon_ring_write(rdev, 0); radeon_ring_write(rdev, PACKET0(GB_ENABLE, 0)); radeon_ring_write(rdev, 0); - radeon_ring_write(rdev, PACKET0(0x42C8, 0)); + radeon_ring_write(rdev, PACKET0(R500_SU_REG_DEST, 0)); radeon_ring_write(rdev, (1 << rdev->num_gb_pipes) - 1); radeon_ring_write(rdev, PACKET0(VAP_INDEX_OFFSET, 0)); radeon_ring_write(rdev, 0); @@ -153,8 +153,8 @@ void rv515_gpu_init(struct radeon_device *rdev) } rv515_vga_render_disable(rdev); r420_pipes_init(rdev); - gb_pipe_select = RREG32(0x402C); - tmp = RREG32(0x170C); + gb_pipe_select = RREG32(R400_GB_PIPE_SELECT); + tmp = RREG32(R300_DST_PIPE_CONFIG); pipe_select_current = (tmp >> 2) & 3; tmp = (1 << pipe_select_current) | (((gb_pipe_select >> 8) & 0xF) << 4); -- cgit v1.2.3-18-g5258 From fa6bee46a655a750afb9a78a7ddf9a3bcda97db8 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 25 Jan 2011 11:55:50 -0500 Subject: drm/radeon/kms: fix r6xx+ scanout on BE systems R6xx+ have per-block swappers. BE content in the framebuffer will now be swapped properly during scanout. Untested, however, the same code is reported working in the UMS ddx. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 17 +++++++++++++++++ drivers/gpu/drm/radeon/r600_reg.h | 6 +++++- 2 files changed, 22 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index d3ca17080df..842954fe74c 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -994,6 +994,7 @@ static int evergreen_crtc_do_set_base(struct drm_crtc *crtc, struct radeon_bo *rbo; uint64_t fb_location; uint32_t fb_format, fb_pitch_pixels, tiling_flags; + u32 fb_swap = EVERGREEN_GRPH_ENDIAN_SWAP(EVERGREEN_GRPH_ENDIAN_NONE); int r; /* no fb bound */ @@ -1045,11 +1046,17 @@ static int evergreen_crtc_do_set_base(struct drm_crtc *crtc, case 16: fb_format = (EVERGREEN_GRPH_DEPTH(EVERGREEN_GRPH_DEPTH_16BPP) | EVERGREEN_GRPH_FORMAT(EVERGREEN_GRPH_FORMAT_ARGB565)); +#ifdef __BIG_ENDIAN + fb_swap = EVERGREEN_GRPH_ENDIAN_SWAP(EVERGREEN_GRPH_ENDIAN_8IN16); +#endif break; case 24: case 32: fb_format = (EVERGREEN_GRPH_DEPTH(EVERGREEN_GRPH_DEPTH_32BPP) | EVERGREEN_GRPH_FORMAT(EVERGREEN_GRPH_FORMAT_ARGB8888)); +#ifdef __BIG_ENDIAN + fb_swap = EVERGREEN_GRPH_ENDIAN_SWAP(EVERGREEN_GRPH_ENDIAN_8IN32); +#endif break; default: DRM_ERROR("Unsupported screen depth %d\n", @@ -1094,6 +1101,7 @@ static int evergreen_crtc_do_set_base(struct drm_crtc *crtc, WREG32(EVERGREEN_GRPH_SECONDARY_SURFACE_ADDRESS + radeon_crtc->crtc_offset, (u32) fb_location & EVERGREEN_GRPH_SURFACE_ADDRESS_MASK); WREG32(EVERGREEN_GRPH_CONTROL + radeon_crtc->crtc_offset, fb_format); + WREG32(EVERGREEN_GRPH_SWAP_CONTROL + radeon_crtc->crtc_offset, fb_swap); WREG32(EVERGREEN_GRPH_SURFACE_OFFSET_X + radeon_crtc->crtc_offset, 0); WREG32(EVERGREEN_GRPH_SURFACE_OFFSET_Y + radeon_crtc->crtc_offset, 0); @@ -1150,6 +1158,7 @@ static int avivo_crtc_do_set_base(struct drm_crtc *crtc, struct drm_framebuffer *target_fb; uint64_t fb_location; uint32_t fb_format, fb_pitch_pixels, tiling_flags; + u32 fb_swap = R600_D1GRPH_SWAP_ENDIAN_NONE; int r; /* no fb bound */ @@ -1203,12 +1212,18 @@ static int avivo_crtc_do_set_base(struct drm_crtc *crtc, fb_format = AVIVO_D1GRPH_CONTROL_DEPTH_16BPP | AVIVO_D1GRPH_CONTROL_16BPP_RGB565; +#ifdef __BIG_ENDIAN + fb_swap = R600_D1GRPH_SWAP_ENDIAN_16BIT; +#endif break; case 24: case 32: fb_format = AVIVO_D1GRPH_CONTROL_DEPTH_32BPP | AVIVO_D1GRPH_CONTROL_32BPP_ARGB8888; +#ifdef __BIG_ENDIAN + fb_swap = R600_D1GRPH_SWAP_ENDIAN_32BIT; +#endif break; default: DRM_ERROR("Unsupported screen depth %d\n", @@ -1248,6 +1263,8 @@ static int avivo_crtc_do_set_base(struct drm_crtc *crtc, WREG32(AVIVO_D1GRPH_SECONDARY_SURFACE_ADDRESS + radeon_crtc->crtc_offset, (u32) fb_location); WREG32(AVIVO_D1GRPH_CONTROL + radeon_crtc->crtc_offset, fb_format); + if (rdev->family >= CHIP_R600) + WREG32(R600_D1GRPH_SWAP_CONTROL + radeon_crtc->crtc_offset, fb_swap); WREG32(AVIVO_D1GRPH_SURFACE_OFFSET_X + radeon_crtc->crtc_offset, 0); WREG32(AVIVO_D1GRPH_SURFACE_OFFSET_Y + radeon_crtc->crtc_offset, 0); diff --git a/drivers/gpu/drm/radeon/r600_reg.h b/drivers/gpu/drm/radeon/r600_reg.h index 33cda016b08..f869897c745 100644 --- a/drivers/gpu/drm/radeon/r600_reg.h +++ b/drivers/gpu/drm/radeon/r600_reg.h @@ -81,7 +81,11 @@ #define R600_MEDIUM_VID_LOWER_GPIO_CNTL 0x720 #define R600_LOW_VID_LOWER_GPIO_CNTL 0x724 - +#define R600_D1GRPH_SWAP_CONTROL 0x610C +# define R600_D1GRPH_SWAP_ENDIAN_NONE (0 << 0) +# define R600_D1GRPH_SWAP_ENDIAN_16BIT (1 << 0) +# define R600_D1GRPH_SWAP_ENDIAN_32BIT (2 << 0) +# define R600_D1GRPH_SWAP_ENDIAN_64BIT (3 << 0) #define R600_HDP_NONSURFACE_BASE 0x2c04 -- cgit v1.2.3-18-g5258 From 867996cb4fc51aeccb2148f30356a00352e0f22f Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Sat, 15 Jan 2011 22:41:27 -0700 Subject: arm/tegra: Fix tegra irq_data conversion Commit 37337a8d5e68d6e19075dbdb3acf4f1011dae972, "ARM: tegra: irq_data conversion." missed changing one reference to 'irq' in the function tegra_gpio_irq_set_type(). This patch fixes the build error. Signed-off-by: Grant Likely Acked-by: Lennert Buytenhek Acked-by: Olof Johansson Signed-off-by: Colin Cross --- arch/arm/mach-tegra/gpio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-tegra/gpio.c b/arch/arm/mach-tegra/gpio.c index bd066206e11..ad804880151 100644 --- a/arch/arm/mach-tegra/gpio.c +++ b/arch/arm/mach-tegra/gpio.c @@ -207,9 +207,9 @@ static int tegra_gpio_irq_set_type(struct irq_data *d, unsigned int type) spin_unlock_irqrestore(&bank->lvl_lock[port], flags); if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) - __set_irq_handler_unlocked(irq, handle_level_irq); + __set_irq_handler_unlocked(d->irq, handle_level_irq); else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) - __set_irq_handler_unlocked(irq, handle_edge_irq); + __set_irq_handler_unlocked(d->irq, handle_edge_irq); return 0; } -- cgit v1.2.3-18-g5258 From cc939754db459d9caf3d77eef4f8a58bd8e15077 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Sun, 28 Nov 2010 20:14:53 -0800 Subject: ARM: tegra: irq: Rename gic pointers to avoid conflicts A future patch will export gic_mask_irq and gic_unmask_irq. Rename the pointers in arch/arm/mach-tegra/irq.c to avoid a compile error. Signed-off-by: Colin Cross --- arch/arm/mach-tegra/irq.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c index de7dfad6f76..17c74d21077 100644 --- a/arch/arm/mach-tegra/irq.c +++ b/arch/arm/mach-tegra/irq.c @@ -46,24 +46,24 @@ #define ICTLR_COP_IER_CLR 0x38 #define ICTLR_COP_IEP_CLASS 0x3c -static void (*gic_mask_irq)(struct irq_data *d); -static void (*gic_unmask_irq)(struct irq_data *d); +static void (*tegra_gic_mask_irq)(struct irq_data *d); +static void (*tegra_gic_unmask_irq)(struct irq_data *d); -#define irq_to_ictlr(irq) (((irq)-32) >> 5) +#define irq_to_ictlr(irq) (((irq) - 32) >> 5) static void __iomem *tegra_ictlr_base = IO_ADDRESS(TEGRA_PRIMARY_ICTLR_BASE); -#define ictlr_to_virt(ictlr) (tegra_ictlr_base + (ictlr)*0x100) +#define ictlr_to_virt(ictlr) (tegra_ictlr_base + (ictlr) * 0x100) static void tegra_mask(struct irq_data *d) { void __iomem *addr = ictlr_to_virt(irq_to_ictlr(d->irq)); - gic_mask_irq(d); - writel(1<<(d->irq&31), addr+ICTLR_CPU_IER_CLR); + tegra_gic_mask_irq(d); + writel(1 << (d->irq & 31), addr+ICTLR_CPU_IER_CLR); } static void tegra_unmask(struct irq_data *d) { void __iomem *addr = ictlr_to_virt(irq_to_ictlr(d->irq)); - gic_unmask_irq(d); + tegra_gic_unmask_irq(d); writel(1<<(d->irq&31), addr+ICTLR_CPU_IER_SET); } @@ -98,8 +98,8 @@ void __init tegra_init_irq(void) IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100)); gic = get_irq_chip(29); - gic_unmask_irq = gic->irq_unmask; - gic_mask_irq = gic->irq_mask; + tegra_gic_unmask_irq = gic->irq_unmask; + tegra_gic_mask_irq = gic->irq_mask; tegra_irq.irq_ack = gic->irq_ack; #ifdef CONFIG_SMP tegra_irq.irq_set_affinity = gic->irq_set_affinity; -- cgit v1.2.3-18-g5258 From b48b5f51568977592f1bfce91c1c6378b0a5a4f5 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Sat, 22 Jan 2011 21:24:14 -0800 Subject: ARM: tegra: clock: Add forward reference to struct clk Signed-off-by: Colin Cross --- arch/arm/mach-tegra/include/mach/clk.h | 2 ++ arch/arm/mach-tegra/include/mach/clkdev.h | 2 ++ 2 files changed, 4 insertions(+) diff --git a/arch/arm/mach-tegra/include/mach/clk.h b/arch/arm/mach-tegra/include/mach/clk.h index d7723955dac..a217f68ba57 100644 --- a/arch/arm/mach-tegra/include/mach/clk.h +++ b/arch/arm/mach-tegra/include/mach/clk.h @@ -20,6 +20,8 @@ #ifndef __MACH_CLK_H #define __MACH_CLK_H +struct clk; + void tegra_periph_reset_deassert(struct clk *c); void tegra_periph_reset_assert(struct clk *c); diff --git a/arch/arm/mach-tegra/include/mach/clkdev.h b/arch/arm/mach-tegra/include/mach/clkdev.h index 412f5c63e65..66cd3f4fc89 100644 --- a/arch/arm/mach-tegra/include/mach/clkdev.h +++ b/arch/arm/mach-tegra/include/mach/clkdev.h @@ -20,6 +20,8 @@ #ifndef __MACH_CLKDEV_H #define __MACH_CLKDEV_H +struct clk; + static inline int __clk_get(struct clk *clk) { return 1; -- cgit v1.2.3-18-g5258 From cf04d120d9413de581437cf9a29f138ec1178f65 Mon Sep 17 00:00:00 2001 From: Stefan Bader Date: Thu, 27 Jan 2011 10:03:14 -0500 Subject: xen/p2m: Mark INVALID_P2M_ENTRY the mfn_list past max_pfn. In case the mfn_list does not have enough entries to fill a p2m page we do not want the entries from max_pfn up to the boundary to be filled with unknown values. Hence set them to INVALID_P2M_ENTRY. Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/p2m.c | 18 ++++++------------ 1 file changed, 6 insertions(+), 12 deletions(-) diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c index ddc81a06edb..fd12d7ce7ff 100644 --- a/arch/x86/xen/p2m.c +++ b/arch/x86/xen/p2m.c @@ -241,21 +241,15 @@ void __init xen_build_dynamic_phys_to_machine(void) * As long as the mfn_list has enough entries to completely * fill a p2m page, pointing into the array is ok. But if * not the entries beyond the last pfn will be undefined. - * And guessing that the 'what-ever-there-is' does not take it - * too kindly when changing it to invalid markers, a new page - * is allocated, initialized and filled with the valid part. */ if (unlikely(pfn + P2M_PER_PAGE > max_pfn)) { unsigned long p2midx; - unsigned long *p2m = extend_brk(PAGE_SIZE, PAGE_SIZE); - p2m_init(p2m); - - for (p2midx = 0; pfn + p2midx < max_pfn; p2midx++) { - p2m[p2midx] = mfn_list[pfn + p2midx]; - } - p2m_top[topidx][mididx] = p2m; - } else - p2m_top[topidx][mididx] = &mfn_list[pfn]; + + p2midx = max_pfn % P2M_PER_PAGE; + for ( ; p2midx < P2M_PER_PAGE; p2midx++) + mfn_list[pfn + p2midx] = INVALID_P2M_ENTRY; + } + p2m_top[topidx][mididx] = &mfn_list[pfn]; } m2p_override_init(); -- cgit v1.2.3-18-g5258 From 7cb31b752c71e0bd405c1139e1907c3335877dff Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Thu, 27 Jan 2011 10:13:25 -0500 Subject: xen/e820: Guard against E820_RAM not having page-aligned size or start. Under Dell Inspiron 1525, and Intel SandyBridge SDP's the BIOS e820 RAM is not page-aligned: [ 0.000000] Xen: 0000000000100000 - 00000000df66d800 (usable) We were not handling that and ended up setting up a pagetable that included up to df66e000 with the disastrous effect that when memset(NODE_DATA(nodeid), 0, sizeof(pg_data_t)); tried to clear the page it would crash at the 2K mark. Initially reported by Michael Young @ http://lists.xensource.com/archives/html/xen-devel/2011-01/msg00108.html The fix is to page-align the size and also take into consideration the start of the E820 (in case that is not page-aligned either). This fixes the bootup failure on those affected machines. This patch is a rework of the Micheal A Young initial patch and considers the case if the start is not page-aligned. Reported-by: Michael A Young Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: Michael A Young --- arch/x86/xen/setup.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index b5a7f928234..75bdf2ab3d7 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -179,8 +179,13 @@ char * __init xen_memory_setup(void) e820.nr_map = 0; xen_extra_mem_start = mem_end; for (i = 0; i < memmap.nr_entries; i++) { - unsigned long long end = map[i].addr + map[i].size; + unsigned long long end; + /* Guard against non-page aligned E820 entries. */ + if (map[i].type == E820_RAM) + map[i].size -= (map[i].size + map[i].addr) % PAGE_SIZE; + + end = map[i].addr + map[i].size; if (map[i].type == E820_RAM && end > mem_end) { /* RAM off the end - may be partially included */ u64 delta = min(map[i].size, end - mem_end); -- cgit v1.2.3-18-g5258 From 23febeddbe67e5160929f7c48f7bfe83c2eecb99 Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Wed, 26 Jan 2011 17:07:27 +0000 Subject: xen/setup: Route halt operations to safe_halt pvop. With this patch, the cpuidle driver does not load and does not issue the mwait operations. Instead the hypervisor is doing them (b/c we call the safe_halt pvops call). This fixes quite a lot of bootup issues wherein the user had to force interrupts for the continuation of the bootup. Details are discussed in: http://lists.xensource.com/archives/html/xen-devel/2011-01/msg00535.html [v2: Wrote the commit description] Reported-by: Daniel De Graaf Tested-by: Daniel De Graaf Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/setup.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index 75bdf2ab3d7..a8a66a50d44 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -355,6 +355,7 @@ void __init xen_arch_setup(void) boot_cpu_data.hlt_works_ok = 1; #endif pm_idle = default_idle; + boot_option_idle_override = IDLE_HALT; fiddle_vdso(); } -- cgit v1.2.3-18-g5258 From 88d4f0db7fa8785859c1d637f9aac210932b6216 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 25 Jan 2011 19:40:51 +0100 Subject: perf: Fix alloc_callchain_buffers() Commit 927c7a9e92c4 ("perf: Fix race in callchains") introduced a mismatch in the sizing of struct callchain_cpus_entries. nr_cpu_ids must be used instead of num_possible_cpus(), or we might get out of bound memory accesses on some machines. Signed-off-by: Eric Dumazet Cc: Frederic Weisbecker Cc: Peter Zijlstra Cc: Arnaldo Carvalho de Melo Cc: David Miller Cc: Stephane Eranian CC: stable@kernel.org LKML-Reference: <1295980851.3588.351.camel@edumazet-laptop> Signed-off-by: Ingo Molnar --- kernel/perf_event.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/kernel/perf_event.c b/kernel/perf_event.c index 126a302c481..852ae8c6650 100644 --- a/kernel/perf_event.c +++ b/kernel/perf_event.c @@ -1999,8 +1999,7 @@ static int alloc_callchain_buffers(void) * accessed from NMI. Use a temporary manual per cpu allocation * until that gets sorted out. */ - size = sizeof(*entries) + sizeof(struct perf_callchain_entry *) * - num_possible_cpus(); + size = offsetof(struct callchain_cpus_entries, cpu_entries[nr_cpu_ids]); entries = kzalloc(size, GFP_KERNEL); if (!entries) -- cgit v1.2.3-18-g5258 From d038b12c6d773a4b9f69ca5243773bf6314f7ee9 Mon Sep 17 00:00:00 2001 From: Stephane Eranian Date: Tue, 25 Jan 2011 17:32:01 +0200 Subject: perf: Fix Pentium4 raw event validation This patch fixes some issues with raw event validation on Pentium 4 (Netburst) based processors. As I was testing libpfm4 Netburst support, I ran into two problems in the p4_validate_raw_event() function: - the shared field must be checked ONLY when HT is on - the binding to ESCR register was missing The second item was causing raw events to not be encoded correctly compared to generic PMU events. With this patch, I can now pass Netburst events to libpfm4 examples and get meaningful results: $ task -e global_power_events:running:u noploop 1 noploop for 1 seconds 3,206,304,898 global_power_events:running Signed-off-by: Stephane Eranian Acked-by: Cyrill Gorcunov Cc: peterz@infradead.org Cc: paulus@samba.org Cc: davem@davemloft.net Cc: fweisbec@gmail.com Cc: perfmon2-devel@lists.sf.net Cc: eranian@gmail.com Cc: robert.richter@amd.com Cc: acme@redhat.com Cc: gorcunov@gmail.com Cc: ming.m.lin@intel.com LKML-Reference: <4d3efb2f.1252d80a.1a80.ffffc83f@mx.google.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event_p4.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c index e56b9bfbabd..f7a0993c1e7 100644 --- a/arch/x86/kernel/cpu/perf_event_p4.c +++ b/arch/x86/kernel/cpu/perf_event_p4.c @@ -682,7 +682,7 @@ static int p4_validate_raw_event(struct perf_event *event) * if an event is shared accross the logical threads * the user needs special permissions to be able to use it */ - if (p4_event_bind_map[v].shared) { + if (p4_ht_active() && p4_event_bind_map[v].shared) { if (perf_paranoid_cpu() && !capable(CAP_SYS_ADMIN)) return -EACCES; } @@ -727,7 +727,8 @@ static int p4_hw_config(struct perf_event *event) event->hw.config = p4_set_ht_bit(event->hw.config); if (event->attr.type == PERF_TYPE_RAW) { - + struct p4_event_bind *bind; + unsigned int esel; /* * Clear bits we reserve to be managed by kernel itself * and never allowed from a user space @@ -743,6 +744,13 @@ static int p4_hw_config(struct perf_event *event) * bits since we keep additional info here (for cache events and etc) */ event->hw.config |= event->attr.config; + bind = p4_config_get_bind(event->attr.config); + if (!bind) { + rc = -EINVAL; + goto out; + } + esel = P4_OPCODE_ESEL(bind->opcode); + event->hw.config |= p4_config_pack_cccr(P4_CCCR_ESEL(esel)); } rc = x86_setup_perfctr(event); -- cgit v1.2.3-18-g5258 From 0a08739e81671de2cb690774937fe510c000b27f Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sat, 30 Oct 2010 23:43:05 +0200 Subject: kmemleak: remove memset by using kzalloc We don't need to memset if we just use kzalloc() rather than kmalloc() in kmemleak_test_init(). Signed-off-by: Jesper Juhl Reviewed-by: Minchan Kim Signed-off-by: Catalin Marinas --- mm/kmemleak-test.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/mm/kmemleak-test.c b/mm/kmemleak-test.c index 177a5169bbd..ff0d9779cec 100644 --- a/mm/kmemleak-test.c +++ b/mm/kmemleak-test.c @@ -75,13 +75,11 @@ static int __init kmemleak_test_init(void) * after the module is removed. */ for (i = 0; i < 10; i++) { - elem = kmalloc(sizeof(*elem), GFP_KERNEL); - pr_info("kmemleak: kmalloc(sizeof(*elem)) = %p\n", elem); + elem = kzalloc(sizeof(*elem), GFP_KERNEL); + pr_info("kmemleak: kzalloc(sizeof(*elem)) = %p\n", elem); if (!elem) return -ENOMEM; - memset(elem, 0, sizeof(*elem)); INIT_LIST_HEAD(&elem->list); - list_add_tail(&elem->list, &test_list); } -- cgit v1.2.3-18-g5258 From 6ae4bd1f0bc479984f30061b5e5116060c24a267 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 27 Jan 2011 10:30:26 +0000 Subject: kmemleak: Allow kmemleak metadata allocations to fail MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds __GFP_NORETRY and __GFP_NOMEMALLOC flags to the kmemleak metadata allocations so that it has a smaller effect on the users of the kernel slab allocator. Since kmemleak allocations can now fail more often, this patch also reduces the verbosity by passing __GFP_NOWARN and not dumping the stack trace when a kmemleak allocation fails. Signed-off-by: Catalin Marinas Reported-by: Toralf Förster Acked-by: Pekka Enberg Acked-by: David Rientjes Cc: Ted Ts'o --- mm/kmemleak.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/mm/kmemleak.c b/mm/kmemleak.c index bd9bc214091..84225f3b719 100644 --- a/mm/kmemleak.c +++ b/mm/kmemleak.c @@ -113,7 +113,9 @@ #define BYTES_PER_POINTER sizeof(void *) /* GFP bitmask for kmemleak internal allocations */ -#define GFP_KMEMLEAK_MASK (GFP_KERNEL | GFP_ATOMIC) +#define gfp_kmemleak_mask(gfp) (((gfp) & (GFP_KERNEL | GFP_ATOMIC)) | \ + __GFP_NORETRY | __GFP_NOMEMALLOC | \ + __GFP_NOWARN) /* scanning area inside a memory block */ struct kmemleak_scan_area { @@ -511,9 +513,10 @@ static struct kmemleak_object *create_object(unsigned long ptr, size_t size, struct kmemleak_object *object; struct prio_tree_node *node; - object = kmem_cache_alloc(object_cache, gfp & GFP_KMEMLEAK_MASK); + object = kmem_cache_alloc(object_cache, gfp_kmemleak_mask(gfp)); if (!object) { - kmemleak_stop("Cannot allocate a kmemleak_object structure\n"); + pr_warning("Cannot allocate a kmemleak_object structure\n"); + kmemleak_disable(); return NULL; } @@ -734,9 +737,9 @@ static void add_scan_area(unsigned long ptr, size_t size, gfp_t gfp) return; } - area = kmem_cache_alloc(scan_area_cache, gfp & GFP_KMEMLEAK_MASK); + area = kmem_cache_alloc(scan_area_cache, gfp_kmemleak_mask(gfp)); if (!area) { - kmemleak_warn("Cannot allocate a scan area\n"); + pr_warning("Cannot allocate a scan area\n"); goto out; } -- cgit v1.2.3-18-g5258 From ee2c9258501f83d3ed0fd09ce5df1cec53312cf0 Mon Sep 17 00:00:00 2001 From: Shirish Pargaonkar Date: Thu, 27 Jan 2011 09:58:04 -0600 Subject: cifs: More crypto cleanup (try #2) Replaced md4 hashing function local to cifs module with kernel crypto APIs. As a result, md4 hashing function and its supporting functions in file md4.c are not needed anymore. Cleaned up function declarations, removed forward function declarations, and removed a header file that is being deleted from being included. Verified that sec=ntlm/i, sec=ntlmv2/i, and sec=ntlmssp/i work correctly. Signed-off-by: Shirish Pargaonkar Reviewed-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/Makefile | 2 +- fs/cifs/cifsencrypt.c | 32 +++++--- fs/cifs/cifsencrypt.h | 33 -------- fs/cifs/cifsproto.h | 9 ++- fs/cifs/connect.c | 6 +- fs/cifs/link.c | 5 +- fs/cifs/md4.c | 205 -------------------------------------------------- fs/cifs/smbdes.c | 1 - fs/cifs/smbencrypt.c | 90 +++++++++++++++------- 9 files changed, 97 insertions(+), 286 deletions(-) delete mode 100644 fs/cifs/cifsencrypt.h delete mode 100644 fs/cifs/md4.c diff --git a/fs/cifs/Makefile b/fs/cifs/Makefile index e1322296cb6..d87558448e3 100644 --- a/fs/cifs/Makefile +++ b/fs/cifs/Makefile @@ -5,7 +5,7 @@ obj-$(CONFIG_CIFS) += cifs.o cifs-y := cifsfs.o cifssmb.o cifs_debug.o connect.o dir.o file.o inode.o \ link.o misc.o netmisc.o smbdes.o smbencrypt.o transport.o asn1.o \ - md4.o cifs_unicode.o nterr.o xattr.o cifsencrypt.o \ + cifs_unicode.o nterr.o xattr.o cifsencrypt.o \ readdir.o ioctl.o sess.o export.o cifs-$(CONFIG_CIFS_ACL) += cifsacl.o diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c index 35bf329c90e..0db5f1de022 100644 --- a/fs/cifs/cifsencrypt.c +++ b/fs/cifs/cifsencrypt.c @@ -36,11 +36,6 @@ /* Note that the smb header signature field on input contains the sequence number before this function is called */ -extern void mdfour(unsigned char *out, unsigned char *in, int n); -extern void E_md4hash(const unsigned char *passwd, unsigned char *p16); -extern void SMBencrypt(unsigned char *passwd, const unsigned char *c8, - unsigned char *p24); - static int cifs_calculate_signature(const struct smb_hdr *cifs_pdu, struct TCP_Server_Info *server, char *signature) { @@ -233,6 +228,7 @@ int cifs_verify_signature(struct smb_hdr *cifs_pdu, /* first calculate 24 bytes ntlm response and then 16 byte session key */ int setup_ntlm_response(struct cifsSesInfo *ses) { + int rc = 0; unsigned int temp_len = CIFS_SESS_KEY_SIZE + CIFS_AUTH_RESP_SIZE; char temp_key[CIFS_SESS_KEY_SIZE]; @@ -246,13 +242,26 @@ int setup_ntlm_response(struct cifsSesInfo *ses) } ses->auth_key.len = temp_len; - SMBNTencrypt(ses->password, ses->server->cryptkey, + rc = SMBNTencrypt(ses->password, ses->server->cryptkey, ses->auth_key.response + CIFS_SESS_KEY_SIZE); + if (rc) { + cFYI(1, "%s Can't generate NTLM response, error: %d", + __func__, rc); + return rc; + } + + rc = E_md4hash(ses->password, temp_key); + if (rc) { + cFYI(1, "%s Can't generate NT hash, error: %d", __func__, rc); + return rc; + } - E_md4hash(ses->password, temp_key); - mdfour(ses->auth_key.response, temp_key, CIFS_SESS_KEY_SIZE); + rc = mdfour(ses->auth_key.response, temp_key, CIFS_SESS_KEY_SIZE); + if (rc) + cFYI(1, "%s Can't generate NTLM session key, error: %d", + __func__, rc); - return 0; + return rc; } #ifdef CONFIG_CIFS_WEAK_PW_HASH @@ -699,14 +708,13 @@ cifs_crypto_shash_allocate(struct TCP_Server_Info *server) unsigned int size; server->secmech.hmacmd5 = crypto_alloc_shash("hmac(md5)", 0, 0); - if (!server->secmech.hmacmd5 || - IS_ERR(server->secmech.hmacmd5)) { + if (IS_ERR(server->secmech.hmacmd5)) { cERROR(1, "could not allocate crypto hmacmd5\n"); return PTR_ERR(server->secmech.hmacmd5); } server->secmech.md5 = crypto_alloc_shash("md5", 0, 0); - if (!server->secmech.md5 || IS_ERR(server->secmech.md5)) { + if (IS_ERR(server->secmech.md5)) { cERROR(1, "could not allocate crypto md5\n"); rc = PTR_ERR(server->secmech.md5); goto crypto_allocate_md5_fail; diff --git a/fs/cifs/cifsencrypt.h b/fs/cifs/cifsencrypt.h deleted file mode 100644 index 15d2ec00647..00000000000 --- a/fs/cifs/cifsencrypt.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * fs/cifs/cifsencrypt.h - * - * Copyright (c) International Business Machines Corp., 2005 - * Author(s): Steve French (sfrench@us.ibm.com) - * - * Externs for misc. small encryption routines - * so we do not have to put them in cifsproto.h - * - * This library is free software; you can redistribute it and/or modify - * it under the terms of the GNU Lesser General Public License as published - * by the Free Software Foundation; either version 2.1 of the License, or - * (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See - * the GNU Lesser General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public License - * along with this library; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* md4.c */ -extern void mdfour(unsigned char *out, unsigned char *in, int n); -/* smbdes.c */ -extern void E_P16(unsigned char *p14, unsigned char *p16); -extern void E_P24(unsigned char *p21, const unsigned char *c8, - unsigned char *p24); - - - diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 35c989f4924..8096f27ad9a 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -375,7 +375,7 @@ extern int cifs_sign_smb2(struct kvec *iov, int n_vec, struct TCP_Server_Info *, extern int cifs_verify_signature(struct smb_hdr *, struct TCP_Server_Info *server, __u32 expected_sequence_number); -extern void SMBNTencrypt(unsigned char *, unsigned char *, unsigned char *); +extern int SMBNTencrypt(unsigned char *, unsigned char *, unsigned char *); extern int setup_ntlm_response(struct cifsSesInfo *); extern int setup_ntlmv2_rsp(struct cifsSesInfo *, const struct nls_table *); extern int cifs_crypto_shash_allocate(struct TCP_Server_Info *); @@ -425,4 +425,11 @@ extern bool CIFSCouldBeMFSymlink(const struct cifs_fattr *fattr); extern int CIFSCheckMFSymlink(struct cifs_fattr *fattr, const unsigned char *path, struct cifs_sb_info *cifs_sb, int xid); +extern int mdfour(unsigned char *, unsigned char *, int); +extern int E_md4hash(const unsigned char *passwd, unsigned char *p16); +extern void SMBencrypt(unsigned char *passwd, const unsigned char *c8, + unsigned char *p24); +extern void E_P16(unsigned char *p14, unsigned char *p16); +extern void E_P24(unsigned char *p21, const unsigned char *c8, + unsigned char *p24); #endif /* _CIFSPROTO_H */ diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 47034af67b0..47d8ff62368 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -55,9 +55,6 @@ /* SMB echo "timeout" -- FIXME: tunable? */ #define SMB_ECHO_INTERVAL (60 * HZ) -extern void SMBNTencrypt(unsigned char *passwd, unsigned char *c8, - unsigned char *p24); - extern mempool_t *cifs_req_poolp; struct smb_vol { @@ -2990,7 +2987,8 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses, bcc_ptr); else #endif /* CIFS_WEAK_PW_HASH */ - SMBNTencrypt(tcon->password, ses->server->cryptkey, bcc_ptr); + rc = SMBNTencrypt(tcon->password, ses->server->cryptkey, + bcc_ptr); bcc_ptr += CIFS_AUTH_RESP_SIZE; if (ses->capabilities & CAP_UNICODE) { diff --git a/fs/cifs/link.c b/fs/cifs/link.c index d3444ea6ac7..02cd60aefbf 100644 --- a/fs/cifs/link.c +++ b/fs/cifs/link.c @@ -54,10 +54,9 @@ symlink_hash(unsigned int link_len, const char *link_str, u8 *md5_hash) struct sdesc *sdescmd5; md5 = crypto_alloc_shash("md5", 0, 0); - if (!md5 || IS_ERR(md5)) { - rc = PTR_ERR(md5); + if (IS_ERR(md5)) { cERROR(1, "%s: Crypto md5 allocation error %d\n", __func__, rc); - return rc; + return PTR_ERR(md5); } size = sizeof(struct shash_desc) + crypto_shash_descsize(md5); sdescmd5 = kmalloc(size, GFP_KERNEL); diff --git a/fs/cifs/md4.c b/fs/cifs/md4.c deleted file mode 100644 index a725c2609d6..00000000000 --- a/fs/cifs/md4.c +++ /dev/null @@ -1,205 +0,0 @@ -/* - Unix SMB/Netbios implementation. - Version 1.9. - a implementation of MD4 designed for use in the SMB authentication protocol - Copyright (C) Andrew Tridgell 1997-1998. - Modified by Steve French (sfrench@us.ibm.com) 2002-2003 - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ -#include -#include -#include "cifsencrypt.h" - -/* NOTE: This code makes no attempt to be fast! */ - -static __u32 -F(__u32 X, __u32 Y, __u32 Z) -{ - return (X & Y) | ((~X) & Z); -} - -static __u32 -G(__u32 X, __u32 Y, __u32 Z) -{ - return (X & Y) | (X & Z) | (Y & Z); -} - -static __u32 -H(__u32 X, __u32 Y, __u32 Z) -{ - return X ^ Y ^ Z; -} - -static __u32 -lshift(__u32 x, int s) -{ - x &= 0xFFFFFFFF; - return ((x << s) & 0xFFFFFFFF) | (x >> (32 - s)); -} - -#define ROUND1(a,b,c,d,k,s) (*a) = lshift((*a) + F(*b,*c,*d) + X[k], s) -#define ROUND2(a,b,c,d,k,s) (*a) = lshift((*a) + G(*b,*c,*d) + X[k] + (__u32)0x5A827999,s) -#define ROUND3(a,b,c,d,k,s) (*a) = lshift((*a) + H(*b,*c,*d) + X[k] + (__u32)0x6ED9EBA1,s) - -/* this applies md4 to 64 byte chunks */ -static void -mdfour64(__u32 *M, __u32 *A, __u32 *B, __u32 *C, __u32 *D) -{ - int j; - __u32 AA, BB, CC, DD; - __u32 X[16]; - - - for (j = 0; j < 16; j++) - X[j] = M[j]; - - AA = *A; - BB = *B; - CC = *C; - DD = *D; - - ROUND1(A, B, C, D, 0, 3); - ROUND1(D, A, B, C, 1, 7); - ROUND1(C, D, A, B, 2, 11); - ROUND1(B, C, D, A, 3, 19); - ROUND1(A, B, C, D, 4, 3); - ROUND1(D, A, B, C, 5, 7); - ROUND1(C, D, A, B, 6, 11); - ROUND1(B, C, D, A, 7, 19); - ROUND1(A, B, C, D, 8, 3); - ROUND1(D, A, B, C, 9, 7); - ROUND1(C, D, A, B, 10, 11); - ROUND1(B, C, D, A, 11, 19); - ROUND1(A, B, C, D, 12, 3); - ROUND1(D, A, B, C, 13, 7); - ROUND1(C, D, A, B, 14, 11); - ROUND1(B, C, D, A, 15, 19); - - ROUND2(A, B, C, D, 0, 3); - ROUND2(D, A, B, C, 4, 5); - ROUND2(C, D, A, B, 8, 9); - ROUND2(B, C, D, A, 12, 13); - ROUND2(A, B, C, D, 1, 3); - ROUND2(D, A, B, C, 5, 5); - ROUND2(C, D, A, B, 9, 9); - ROUND2(B, C, D, A, 13, 13); - ROUND2(A, B, C, D, 2, 3); - ROUND2(D, A, B, C, 6, 5); - ROUND2(C, D, A, B, 10, 9); - ROUND2(B, C, D, A, 14, 13); - ROUND2(A, B, C, D, 3, 3); - ROUND2(D, A, B, C, 7, 5); - ROUND2(C, D, A, B, 11, 9); - ROUND2(B, C, D, A, 15, 13); - - ROUND3(A, B, C, D, 0, 3); - ROUND3(D, A, B, C, 8, 9); - ROUND3(C, D, A, B, 4, 11); - ROUND3(B, C, D, A, 12, 15); - ROUND3(A, B, C, D, 2, 3); - ROUND3(D, A, B, C, 10, 9); - ROUND3(C, D, A, B, 6, 11); - ROUND3(B, C, D, A, 14, 15); - ROUND3(A, B, C, D, 1, 3); - ROUND3(D, A, B, C, 9, 9); - ROUND3(C, D, A, B, 5, 11); - ROUND3(B, C, D, A, 13, 15); - ROUND3(A, B, C, D, 3, 3); - ROUND3(D, A, B, C, 11, 9); - ROUND3(C, D, A, B, 7, 11); - ROUND3(B, C, D, A, 15, 15); - - *A += AA; - *B += BB; - *C += CC; - *D += DD; - - *A &= 0xFFFFFFFF; - *B &= 0xFFFFFFFF; - *C &= 0xFFFFFFFF; - *D &= 0xFFFFFFFF; - - for (j = 0; j < 16; j++) - X[j] = 0; -} - -static void -copy64(__u32 *M, unsigned char *in) -{ - int i; - - for (i = 0; i < 16; i++) - M[i] = (in[i * 4 + 3] << 24) | (in[i * 4 + 2] << 16) | - (in[i * 4 + 1] << 8) | (in[i * 4 + 0] << 0); -} - -static void -copy4(unsigned char *out, __u32 x) -{ - out[0] = x & 0xFF; - out[1] = (x >> 8) & 0xFF; - out[2] = (x >> 16) & 0xFF; - out[3] = (x >> 24) & 0xFF; -} - -/* produce a md4 message digest from data of length n bytes */ -void -mdfour(unsigned char *out, unsigned char *in, int n) -{ - unsigned char buf[128]; - __u32 M[16]; - __u32 b = n * 8; - int i; - __u32 A = 0x67452301; - __u32 B = 0xefcdab89; - __u32 C = 0x98badcfe; - __u32 D = 0x10325476; - - while (n > 64) { - copy64(M, in); - mdfour64(M, &A, &B, &C, &D); - in += 64; - n -= 64; - } - - for (i = 0; i < 128; i++) - buf[i] = 0; - memcpy(buf, in, n); - buf[n] = 0x80; - - if (n <= 55) { - copy4(buf + 56, b); - copy64(M, buf); - mdfour64(M, &A, &B, &C, &D); - } else { - copy4(buf + 120, b); - copy64(M, buf); - mdfour64(M, &A, &B, &C, &D); - copy64(M, buf + 64); - mdfour64(M, &A, &B, &C, &D); - } - - for (i = 0; i < 128; i++) - buf[i] = 0; - copy64(M, buf); - - copy4(out, A); - copy4(out + 4, B); - copy4(out + 8, C); - copy4(out + 12, D); - - A = B = C = D = 0; -} diff --git a/fs/cifs/smbdes.c b/fs/cifs/smbdes.c index b6b6dcb500b..04721485925 100644 --- a/fs/cifs/smbdes.c +++ b/fs/cifs/smbdes.c @@ -45,7 +45,6 @@ up with a different answer to the one above) */ #include -#include "cifsencrypt.h" #define uchar unsigned char static uchar perm1[56] = { 57, 49, 41, 33, 25, 17, 9, diff --git a/fs/cifs/smbencrypt.c b/fs/cifs/smbencrypt.c index 30135005e4f..b5450e9f40c 100644 --- a/fs/cifs/smbencrypt.c +++ b/fs/cifs/smbencrypt.c @@ -33,7 +33,7 @@ #include "cifspdu.h" #include "cifsglob.h" #include "cifs_debug.h" -#include "cifsencrypt.h" +#include "cifsproto.h" #ifndef false #define false 0 @@ -47,14 +47,57 @@ #define SSVALX(buf,pos,val) (CVAL(buf,pos)=(val)&0xFF,CVAL(buf,pos+1)=(val)>>8) #define SSVAL(buf,pos,val) SSVALX((buf),(pos),((__u16)(val))) -/*The following definitions come from libsmb/smbencrypt.c */ +/* produce a md4 message digest from data of length n bytes */ +int +mdfour(unsigned char *md4_hash, unsigned char *link_str, int link_len) +{ + int rc; + unsigned int size; + struct crypto_shash *md4; + struct sdesc *sdescmd4; + + md4 = crypto_alloc_shash("md4", 0, 0); + if (IS_ERR(md4)) { + cERROR(1, "%s: Crypto md4 allocation error %d\n", __func__, rc); + return PTR_ERR(md4); + } + size = sizeof(struct shash_desc) + crypto_shash_descsize(md4); + sdescmd4 = kmalloc(size, GFP_KERNEL); + if (!sdescmd4) { + rc = -ENOMEM; + cERROR(1, "%s: Memory allocation failure\n", __func__); + goto mdfour_err; + } + sdescmd4->shash.tfm = md4; + sdescmd4->shash.flags = 0x0; + + rc = crypto_shash_init(&sdescmd4->shash); + if (rc) { + cERROR(1, "%s: Could not init md4 shash\n", __func__); + goto mdfour_err; + } + crypto_shash_update(&sdescmd4->shash, link_str, link_len); + rc = crypto_shash_final(&sdescmd4->shash, md4_hash); -void SMBencrypt(unsigned char *passwd, const unsigned char *c8, - unsigned char *p24); -void E_md4hash(const unsigned char *passwd, unsigned char *p16); -static void SMBOWFencrypt(unsigned char passwd[16], const unsigned char *c8, - unsigned char p24[24]); -void SMBNTencrypt(unsigned char *passwd, unsigned char *c8, unsigned char *p24); +mdfour_err: + crypto_free_shash(md4); + kfree(sdescmd4); + + return rc; +} + +/* Does the des encryption from the NT or LM MD4 hash. */ +static void +SMBOWFencrypt(unsigned char passwd[16], const unsigned char *c8, + unsigned char p24[24]) +{ + unsigned char p21[21]; + + memset(p21, '\0', 21); + + memcpy(p21, passwd, 16); + E_P24(p21, c8, p24); +} /* This implements the X/Open SMB password encryption @@ -117,9 +160,10 @@ _my_mbstowcs(__u16 *dst, const unsigned char *src, int len) * Creates the MD4 Hash of the users password in NT UNICODE. */ -void +int E_md4hash(const unsigned char *passwd, unsigned char *p16) { + int rc; int len; __u16 wpwd[129]; @@ -138,8 +182,10 @@ E_md4hash(const unsigned char *passwd, unsigned char *p16) /* Calculate length in bytes */ len = _my_wcslen(wpwd) * sizeof(__u16); - mdfour(p16, (unsigned char *) wpwd, len); + rc = mdfour(p16, (unsigned char *) wpwd, len); memset(wpwd, 0, 129 * 2); + + return rc; } #if 0 /* currently unused */ @@ -211,19 +257,6 @@ ntv2_owf_gen(const unsigned char owf[16], const char *user_n, } #endif -/* Does the des encryption from the NT or LM MD4 hash. */ -static void -SMBOWFencrypt(unsigned char passwd[16], const unsigned char *c8, - unsigned char p24[24]) -{ - unsigned char p21[21]; - - memset(p21, '\0', 21); - - memcpy(p21, passwd, 16); - E_P24(p21, c8, p24); -} - /* Does the des encryption from the FIRST 8 BYTES of the NT or LM MD4 hash. */ #if 0 /* currently unused */ static void @@ -241,16 +274,21 @@ NTLMSSPOWFencrypt(unsigned char passwd[8], #endif /* Does the NT MD4 hash then des encryption. */ - -void +int SMBNTencrypt(unsigned char *passwd, unsigned char *c8, unsigned char *p24) { + int rc; unsigned char p21[21]; memset(p21, '\0', 21); - E_md4hash(passwd, p21); + rc = E_md4hash(passwd, p21); + if (rc) { + cFYI(1, "%s Can't generate NT hash, error: %d", __func__, rc); + return rc; + } SMBOWFencrypt(p21, c8, p24); + return rc; } -- cgit v1.2.3-18-g5258 From bc5892c9ec250b36c9287bd52a74d08d75a40152 Mon Sep 17 00:00:00 2001 From: Chaoming Li Date: Fri, 21 Jan 2011 13:57:37 -0600 Subject: rtlwifi: Fix firmware upload errors When the source code from Realtek was prepared for kernel inclusion, some routines were refactored to reduce the level of indentation. This patch repairs errors introduced in that process. Signed-off-by: Chaoming Li Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/efuse.c | 40 ++++++++++++++++++------------------ 1 file changed, 20 insertions(+), 20 deletions(-) diff --git a/drivers/net/wireless/rtlwifi/efuse.c b/drivers/net/wireless/rtlwifi/efuse.c index b8433f3a9bc..62876cd5c41 100644 --- a/drivers/net/wireless/rtlwifi/efuse.c +++ b/drivers/net/wireless/rtlwifi/efuse.c @@ -726,9 +726,9 @@ static int efuse_pg_packet_read(struct ieee80211_hw *hw, u8 offset, u8 *data) } static void efuse_write_data_case1(struct ieee80211_hw *hw, u16 *efuse_addr, - u8 efuse_data, u8 offset, int *bcontinual, - u8 *write_state, struct pgpkt_struct target_pkt, - int *repeat_times, int *bresult, u8 word_en) + u8 efuse_data, u8 offset, int *bcontinual, + u8 *write_state, struct pgpkt_struct *target_pkt, + int *repeat_times, int *bresult, u8 word_en) { struct rtl_priv *rtlpriv = rtl_priv(hw); struct pgpkt_struct tmp_pkt; @@ -744,8 +744,8 @@ static void efuse_write_data_case1(struct ieee80211_hw *hw, u16 *efuse_addr, tmp_pkt.word_en = tmp_header & 0x0F; tmp_word_cnts = efuse_calculate_word_cnts(tmp_pkt.word_en); - if (tmp_pkt.offset != target_pkt.offset) { - efuse_addr = efuse_addr + (tmp_word_cnts * 2) + 1; + if (tmp_pkt.offset != target_pkt->offset) { + *efuse_addr = *efuse_addr + (tmp_word_cnts * 2) + 1; *write_state = PG_STATE_HEADER; } else { for (tmpindex = 0; tmpindex < (tmp_word_cnts * 2); tmpindex++) { @@ -756,23 +756,23 @@ static void efuse_write_data_case1(struct ieee80211_hw *hw, u16 *efuse_addr, } if (bdataempty == false) { - efuse_addr = efuse_addr + (tmp_word_cnts * 2) + 1; + *efuse_addr = *efuse_addr + (tmp_word_cnts * 2) + 1; *write_state = PG_STATE_HEADER; } else { match_word_en = 0x0F; - if (!((target_pkt.word_en & BIT(0)) | + if (!((target_pkt->word_en & BIT(0)) | (tmp_pkt.word_en & BIT(0)))) match_word_en &= (~BIT(0)); - if (!((target_pkt.word_en & BIT(1)) | + if (!((target_pkt->word_en & BIT(1)) | (tmp_pkt.word_en & BIT(1)))) match_word_en &= (~BIT(1)); - if (!((target_pkt.word_en & BIT(2)) | + if (!((target_pkt->word_en & BIT(2)) | (tmp_pkt.word_en & BIT(2)))) match_word_en &= (~BIT(2)); - if (!((target_pkt.word_en & BIT(3)) | + if (!((target_pkt->word_en & BIT(3)) | (tmp_pkt.word_en & BIT(3)))) match_word_en &= (~BIT(3)); @@ -780,7 +780,7 @@ static void efuse_write_data_case1(struct ieee80211_hw *hw, u16 *efuse_addr, badworden = efuse_word_enable_data_write( hw, *efuse_addr + 1, tmp_pkt.word_en, - target_pkt.data); + target_pkt->data); if (0x0F != (badworden & 0x0F)) { u8 reorg_offset = offset; @@ -791,26 +791,26 @@ static void efuse_write_data_case1(struct ieee80211_hw *hw, u16 *efuse_addr, } tmp_word_en = 0x0F; - if ((target_pkt.word_en & BIT(0)) ^ + if ((target_pkt->word_en & BIT(0)) ^ (match_word_en & BIT(0))) tmp_word_en &= (~BIT(0)); - if ((target_pkt.word_en & BIT(1)) ^ + if ((target_pkt->word_en & BIT(1)) ^ (match_word_en & BIT(1))) tmp_word_en &= (~BIT(1)); - if ((target_pkt.word_en & BIT(2)) ^ + if ((target_pkt->word_en & BIT(2)) ^ (match_word_en & BIT(2))) tmp_word_en &= (~BIT(2)); - if ((target_pkt.word_en & BIT(3)) ^ + if ((target_pkt->word_en & BIT(3)) ^ (match_word_en & BIT(3))) tmp_word_en &= (~BIT(3)); if ((tmp_word_en & 0x0F) != 0x0F) { *efuse_addr = efuse_get_current_size(hw); - target_pkt.offset = offset; - target_pkt.word_en = tmp_word_en; + target_pkt->offset = offset; + target_pkt->word_en = tmp_word_en; } else *bcontinual = false; *write_state = PG_STATE_HEADER; @@ -821,8 +821,8 @@ static void efuse_write_data_case1(struct ieee80211_hw *hw, u16 *efuse_addr, } } else { *efuse_addr += (2 * tmp_word_cnts) + 1; - target_pkt.offset = offset; - target_pkt.word_en = word_en; + target_pkt->offset = offset; + target_pkt->word_en = word_en; *write_state = PG_STATE_HEADER; } } @@ -938,7 +938,7 @@ static int efuse_pg_packet_write(struct ieee80211_hw *hw, efuse_write_data_case1(hw, &efuse_addr, efuse_data, offset, &bcontinual, - &write_state, target_pkt, + &write_state, &target_pkt, &repeat_times, &bresult, word_en); else -- cgit v1.2.3-18-g5258 From 15411c27d203e363592d30ab00803254ebe77b90 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Mon, 24 Jan 2011 23:31:43 -0500 Subject: ath5k: fix error handling in ath5k_hw_dma_stop Review spotted a problem with the error handling in ath5k_hw_dma_stop: a successful return from ath5k_hw_stop_tx_dma will be treated as an error, so we always bail out of the loop after processing a single active queue. As a result, we may not actually stop some queues during reset. Signed-off-by: Bob Copeland Acked-by: Bruno Randolf Acked-by: Nick Kossifidis Reviewed-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/dma.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath5k/dma.c b/drivers/net/wireless/ath/ath5k/dma.c index 0064be7ce5c..21091c26a9a 100644 --- a/drivers/net/wireless/ath/ath5k/dma.c +++ b/drivers/net/wireless/ath/ath5k/dma.c @@ -838,9 +838,9 @@ int ath5k_hw_dma_stop(struct ath5k_hw *ah) for (i = 0; i < qmax; i++) { err = ath5k_hw_stop_tx_dma(ah, i); /* -EINVAL -> queue inactive */ - if (err != -EINVAL) + if (err && err != -EINVAL) return err; } - return err; + return 0; } -- cgit v1.2.3-18-g5258 From c9234a662e38309d6fe272ad80e6cdb8d24654f0 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Mon, 24 Jan 2011 23:31:44 -0500 Subject: ath5k: correct endianness of frame duration The ath5k version of ieee80211_generic_frame_duration() returns an __le16 for standard modes but a cpu-endian int for turbo/half/ quarter rates. Make it always return cpu-endian values. Signed-off-by: Bob Copeland Acked-by: Bruno Randolf Acked-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/pcu.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c index e5f2b96a4c6..a702817daf7 100644 --- a/drivers/net/wireless/ath/ath5k/pcu.c +++ b/drivers/net/wireless/ath/ath5k/pcu.c @@ -86,7 +86,7 @@ int ath5k_hw_get_frame_duration(struct ath5k_hw *ah, if (!ah->ah_bwmode) { dur = ieee80211_generic_frame_duration(sc->hw, NULL, len, rate); - return dur; + return le16_to_cpu(dur); } bitrate = rate->bitrate; @@ -265,8 +265,6 @@ static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah) * what rate we should choose to TX ACKs. */ tx_time = ath5k_hw_get_frame_duration(ah, 10, rate); - tx_time = le16_to_cpu(tx_time); - ath5k_hw_reg_write(ah, tx_time, reg); if (!(rate->flags & IEEE80211_RATE_SHORT_PREAMBLE)) -- cgit v1.2.3-18-g5258 From 203043f579ece44bb30291442cd56332651dd37d Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Tue, 25 Jan 2011 14:08:40 +0100 Subject: ath9k: fix race conditions when stop device We do not kill any scheduled tasklets when stopping device, that may cause usage of resources after free. Moreover we enable interrupts in tasklet function, so we could potentially end with interrupts enabled when driver is not ready to receive them. I think patch should fix Ben's kernel crash from: http://marc.info/?l=linux-wireless&m=129438358921501&w=2 Cc: stable@kernel.org Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/init.c | 5 ----- drivers/net/wireless/ath/ath9k/main.c | 9 +++++++++ 2 files changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 767d8b86f1e..b3254a3484a 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -598,8 +598,6 @@ err_btcoex: err_queues: ath9k_hw_deinit(ah); err_hw: - tasklet_kill(&sc->intr_tq); - tasklet_kill(&sc->bcon_tasklet); kfree(ah); sc->sc_ah = NULL; @@ -807,9 +805,6 @@ static void ath9k_deinit_softc(struct ath_softc *sc) ath9k_hw_deinit(sc->sc_ah); - tasklet_kill(&sc->intr_tq); - tasklet_kill(&sc->bcon_tasklet); - kfree(sc->sc_ah); sc->sc_ah = NULL; } diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index c79c97be6cd..ace9f066fa2 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1309,6 +1309,9 @@ static void ath9k_stop(struct ieee80211_hw *hw) spin_lock_bh(&sc->sc_pcu_lock); + /* prevent tasklets to enable interrupts once we disable them */ + ah->imask &= ~ATH9K_INT_GLOBAL; + /* make sure h/w will not generate any interrupt * before setting the invalid flag. */ ath9k_hw_disable_interrupts(ah); @@ -1326,6 +1329,12 @@ static void ath9k_stop(struct ieee80211_hw *hw) spin_unlock_bh(&sc->sc_pcu_lock); + /* we can now sync irq and kill any running tasklets, since we already + * disabled interrupts and not holding a spin lock */ + synchronize_irq(sc->irq); + tasklet_kill(&sc->intr_tq); + tasklet_kill(&sc->bcon_tasklet); + ath9k_ps_restore(sc); sc->ps_idle = true; -- cgit v1.2.3-18-g5258 From ea888357ec005abffb95acee2e61aac68dff429c Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Tue, 25 Jan 2011 14:15:12 +0100 Subject: ath9k_htc: fix race conditions when stop device We do not kill any scheduled tasklets when stopping device, that may cause usage of resources after free. Disable interrupts, kill tasklets and then works in correct order. Cc: stable@kernel.org Tested-by: Sujith Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/htc_drv_init.c | 3 --- drivers/net/wireless/ath/ath9k/htc_drv_main.c | 21 +++++++++++++++------ 2 files changed, 15 insertions(+), 9 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c index 38433f9bfe5..0352f0994ca 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c @@ -142,9 +142,6 @@ static void ath9k_deinit_priv(struct ath9k_htc_priv *priv) { ath9k_htc_exit_debug(priv->ah); ath9k_hw_deinit(priv->ah); - tasklet_kill(&priv->swba_tasklet); - tasklet_kill(&priv->rx_tasklet); - tasklet_kill(&priv->tx_tasklet); kfree(priv->ah); priv->ah = NULL; } diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c index f4d576bc3cc..6bb59958f71 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c @@ -1025,12 +1025,6 @@ static void ath9k_htc_stop(struct ieee80211_hw *hw) int ret = 0; u8 cmd_rsp; - /* Cancel all the running timers/work .. */ - cancel_work_sync(&priv->fatal_work); - cancel_work_sync(&priv->ps_work); - cancel_delayed_work_sync(&priv->ath9k_led_blink_work); - ath9k_led_stop_brightness(priv); - mutex_lock(&priv->mutex); if (priv->op_flags & OP_INVALID) { @@ -1044,8 +1038,23 @@ static void ath9k_htc_stop(struct ieee80211_hw *hw) WMI_CMD(WMI_DISABLE_INTR_CMDID); WMI_CMD(WMI_DRAIN_TXQ_ALL_CMDID); WMI_CMD(WMI_STOP_RECV_CMDID); + + tasklet_kill(&priv->swba_tasklet); + tasklet_kill(&priv->rx_tasklet); + tasklet_kill(&priv->tx_tasklet); + skb_queue_purge(&priv->tx_queue); + mutex_unlock(&priv->mutex); + + /* Cancel all the running timers/work .. */ + cancel_work_sync(&priv->fatal_work); + cancel_work_sync(&priv->ps_work); + cancel_delayed_work_sync(&priv->ath9k_led_blink_work); + ath9k_led_stop_brightness(priv); + + mutex_lock(&priv->mutex); + /* Remove monitor interface here */ if (ah->opmode == NL80211_IFTYPE_MONITOR) { if (ath9k_htc_remove_monitor_interface(priv)) -- cgit v1.2.3-18-g5258 From a29091ecb40ec413f877cdd81f1bb5485b9d2ac9 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Wed, 26 Jan 2011 21:46:29 +0200 Subject: MAINTAINERS: update information for the wl12xx driver Update maintainer's email address, webpage and align with renaming of files. Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- MAINTAINERS | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index c9ec9d80430..a5deb42c1b6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6612,12 +6612,12 @@ S: Maintained F: drivers/net/wireless/wl1251/* WL1271 WIRELESS DRIVER -M: Luciano Coelho +M: Luciano Coelho L: linux-wireless@vger.kernel.org -W: http://wireless.kernel.org +W: http://wireless.kernel.org/en/users/Drivers/wl12xx T: git git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx.git S: Maintained -F: drivers/net/wireless/wl12xx/wl1271* +F: drivers/net/wireless/wl12xx/ F: include/linux/wl12xx.h WL3501 WIRELESS PCMCIA CARD DRIVER -- cgit v1.2.3-18-g5258 From f5a106d9e2a5d947e106c3caace373ded1a695ed Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 27 Jan 2011 17:44:34 +0100 Subject: ARM: 6642/1: mmci: calculate remaining bytes at error correctly The MMCIDATACNT register contain the number of byte left at error not the number of words, so loose the << 2 thing. Further if CRC fails on the first block, we may end up with a negative number of transferred bytes which is not good, and the formula was in wrong order. Signed-off-by: Linus Walleij Signed-off-by: Russell King --- drivers/mmc/host/mmci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 4b8dcd5b2a0..b6fd6dcb41e 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -283,13 +283,13 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data, u32 remain, success; /* Calculate how far we are into the transfer */ - remain = readl(host->base + MMCIDATACNT) << 2; + remain = readl(host->base + MMCIDATACNT); success = data->blksz * data->blocks - remain; dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ (status %08x)\n", status); if (status & MCI_DATACRCFAIL) { /* Last block was not successful */ - host->data_xfered = ((success / data->blksz) - 1 * data->blksz); + host->data_xfered = ((success - 1) / data->blksz) * data->blksz; data->error = -EILSEQ; } else if (status & MCI_DATATIMEOUT) { host->data_xfered = success; -- cgit v1.2.3-18-g5258 From 389f2a18c6a2a5531ac5a155c3ba25784065b1cb Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 26 Jan 2011 00:04:18 +0000 Subject: econet: remove compiler warnings MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit net/econet/af_econet.c: In function ‘econet_sendmsg’: net/econet/af_econet.c:494: warning: label ‘error’ defined but not used net/econet/af_econet.c:268: warning: unused variable ‘sk’ Signed-off-by: Eric Dumazet Acked-by: Phil Blundell Signed-off-by: David S. Miller --- net/econet/af_econet.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/econet/af_econet.c b/net/econet/af_econet.c index 15dcc1a586b..0c282633791 100644 --- a/net/econet/af_econet.c +++ b/net/econet/af_econet.c @@ -265,13 +265,13 @@ static void ec_tx_done(struct sk_buff *skb, int result) static int econet_sendmsg(struct kiocb *iocb, struct socket *sock, struct msghdr *msg, size_t len) { - struct sock *sk = sock->sk; struct sockaddr_ec *saddr=(struct sockaddr_ec *)msg->msg_name; struct net_device *dev; struct ec_addr addr; int err; unsigned char port, cb; #if defined(CONFIG_ECONET_AUNUDP) || defined(CONFIG_ECONET_NATIVE) + struct sock *sk = sock->sk; struct sk_buff *skb; struct ec_cb *eb; #endif @@ -488,10 +488,10 @@ static int econet_sendmsg(struct kiocb *iocb, struct socket *sock, error_free_buf: vfree(userbuf); +error: #else err = -EPROTOTYPE; #endif - error: mutex_unlock(&econet_mutex); return err; -- cgit v1.2.3-18-g5258 From e0ce4af920eb028f38bfd680b1d733f4c7a0b7cf Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Thu, 27 Jan 2011 04:14:03 +0000 Subject: xen: netfront: handle incoming GSO SKBs which are not CHECKSUM_PARTIAL The Linux network stack expects all GSO SKBs to have ip_summed == CHECKSUM_PARTIAL (which implies that the frame contains a partial checksum) and the Xen network ring protocol similarly expects an SKB which has GSO set to also have NETRX_csum_blank (which also implies a partial checksum). However there have been cases of buggy guests which mark a frame as GSO but do not set csum_blank. If we detect that we a receiving such a frame (which manifests as ip_summed != PARTIAL && skb_is_gso) then force the SKB to partial and recalculate the checksum, since we cannot rely on the peer having done so if they have not set csum_blank. Add an ethtool stat to track occurances of this event. Signed-off-by: Ian Campbell Cc: Jeremy Fitzhardinge Cc: David Miller Cc: xen-devel@lists.xensource.com Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller --- drivers/net/xen-netfront.c | 96 ++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 88 insertions(+), 8 deletions(-) diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index 546de574982..da1f1212034 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -120,6 +120,9 @@ struct netfront_info { unsigned long rx_pfn_array[NET_RX_RING_SIZE]; struct multicall_entry rx_mcl[NET_RX_RING_SIZE+1]; struct mmu_update rx_mmu[NET_RX_RING_SIZE]; + + /* Statistics */ + int rx_gso_checksum_fixup; }; struct netfront_rx_info { @@ -770,11 +773,29 @@ static RING_IDX xennet_fill_frags(struct netfront_info *np, return cons; } -static int skb_checksum_setup(struct sk_buff *skb) +static int checksum_setup(struct net_device *dev, struct sk_buff *skb) { struct iphdr *iph; unsigned char *th; int err = -EPROTO; + int recalculate_partial_csum = 0; + + /* + * A GSO SKB must be CHECKSUM_PARTIAL. However some buggy + * peers can fail to set NETRXF_csum_blank when sending a GSO + * frame. In this case force the SKB to CHECKSUM_PARTIAL and + * recalculate the partial checksum. + */ + if (skb->ip_summed != CHECKSUM_PARTIAL && skb_is_gso(skb)) { + struct netfront_info *np = netdev_priv(dev); + np->rx_gso_checksum_fixup++; + skb->ip_summed = CHECKSUM_PARTIAL; + recalculate_partial_csum = 1; + } + + /* A non-CHECKSUM_PARTIAL SKB does not require setup. */ + if (skb->ip_summed != CHECKSUM_PARTIAL) + return 0; if (skb->protocol != htons(ETH_P_IP)) goto out; @@ -788,9 +809,23 @@ static int skb_checksum_setup(struct sk_buff *skb) switch (iph->protocol) { case IPPROTO_TCP: skb->csum_offset = offsetof(struct tcphdr, check); + + if (recalculate_partial_csum) { + struct tcphdr *tcph = (struct tcphdr *)th; + tcph->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr, + skb->len - iph->ihl*4, + IPPROTO_TCP, 0); + } break; case IPPROTO_UDP: skb->csum_offset = offsetof(struct udphdr, check); + + if (recalculate_partial_csum) { + struct udphdr *udph = (struct udphdr *)th; + udph->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr, + skb->len - iph->ihl*4, + IPPROTO_UDP, 0); + } break; default: if (net_ratelimit()) @@ -829,13 +864,11 @@ static int handle_incoming_queue(struct net_device *dev, /* Ethernet work: Delayed to here as it peeks the header. */ skb->protocol = eth_type_trans(skb, dev); - if (skb->ip_summed == CHECKSUM_PARTIAL) { - if (skb_checksum_setup(skb)) { - kfree_skb(skb); - packets_dropped++; - dev->stats.rx_errors++; - continue; - } + if (checksum_setup(dev, skb)) { + kfree_skb(skb); + packets_dropped++; + dev->stats.rx_errors++; + continue; } dev->stats.rx_packets++; @@ -1632,12 +1665,59 @@ static void netback_changed(struct xenbus_device *dev, } } +static const struct xennet_stat { + char name[ETH_GSTRING_LEN]; + u16 offset; +} xennet_stats[] = { + { + "rx_gso_checksum_fixup", + offsetof(struct netfront_info, rx_gso_checksum_fixup) + }, +}; + +static int xennet_get_sset_count(struct net_device *dev, int string_set) +{ + switch (string_set) { + case ETH_SS_STATS: + return ARRAY_SIZE(xennet_stats); + default: + return -EINVAL; + } +} + +static void xennet_get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *stats, u64 * data) +{ + void *np = netdev_priv(dev); + int i; + + for (i = 0; i < ARRAY_SIZE(xennet_stats); i++) + data[i] = *(int *)(np + xennet_stats[i].offset); +} + +static void xennet_get_strings(struct net_device *dev, u32 stringset, u8 * data) +{ + int i; + + switch (stringset) { + case ETH_SS_STATS: + for (i = 0; i < ARRAY_SIZE(xennet_stats); i++) + memcpy(data + i * ETH_GSTRING_LEN, + xennet_stats[i].name, ETH_GSTRING_LEN); + break; + } +} + static const struct ethtool_ops xennet_ethtool_ops = { .set_tx_csum = ethtool_op_set_tx_csum, .set_sg = xennet_set_sg, .set_tso = xennet_set_tso, .get_link = ethtool_op_get_link, + + .get_sset_count = xennet_get_sset_count, + .get_ethtool_stats = xennet_get_ethtool_stats, + .get_strings = xennet_get_strings, }; #ifdef CONFIG_SYSFS -- cgit v1.2.3-18-g5258 From 9eb710797a21fa4a9e09ae9c86c4b3ec9d291c2d Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 26 Jan 2011 00:45:42 +0000 Subject: dl2k: nulify fraginfo after unmap Patch fixes: "DMA-API: device driver tries to free an invalid DMA memory address" warning reported here: https://bugzilla.redhat.com/show_bug.cgi?id=639824 Reported-by: Frantisek Hanzlik Signed-off-by: Stanislaw Gruszka Signed-off-by: David S. Miller --- drivers/net/dl2k.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c index e1a8216ff69..c05db604605 100644 --- a/drivers/net/dl2k.c +++ b/drivers/net/dl2k.c @@ -1753,8 +1753,6 @@ rio_close (struct net_device *dev) /* Free all the skbuffs in the queue. */ for (i = 0; i < RX_RING_SIZE; i++) { - np->rx_ring[i].status = 0; - np->rx_ring[i].fraginfo = 0; skb = np->rx_skbuff[i]; if (skb) { pci_unmap_single(np->pdev, @@ -1763,6 +1761,8 @@ rio_close (struct net_device *dev) dev_kfree_skb (skb); np->rx_skbuff[i] = NULL; } + np->rx_ring[i].status = 0; + np->rx_ring[i].fraginfo = 0; } for (i = 0; i < TX_RING_SIZE; i++) { skb = np->tx_skbuff[i]; -- cgit v1.2.3-18-g5258 From 6d3a9a685465986d7653c5abbc0b24681e7c44d7 Mon Sep 17 00:00:00 2001 From: Kurt Van Dijck Date: Wed, 26 Jan 2011 04:55:24 +0000 Subject: net: fix validate_link_af in rtnetlink core I'm testing an API that uses IFLA_AF_SPEC attribute. In the rtnetlink core , the set_link_af() member of the rtnl_af_ops struct receives the nested attribute (as I expected), but the validate_link_af() member receives the parent attribute. IMO, this patch fixes this. Signed-off-by: Kurt Van Dijck Signed-off-by: David S. Miller --- net/core/rtnetlink.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index 750db57f3bb..31459ef13ca 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -1121,8 +1121,7 @@ static int validate_linkmsg(struct net_device *dev, struct nlattr *tb[]) return -EOPNOTSUPP; if (af_ops->validate_link_af) { - err = af_ops->validate_link_af(dev, - tb[IFLA_AF_SPEC]); + err = af_ops->validate_link_af(dev, af); if (err < 0) return err; } -- cgit v1.2.3-18-g5258 From c2aa3665cf8510b1665ee2f5a9525cf7be6dec4f Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 25 Jan 2011 23:18:38 +0000 Subject: net: add kmemcheck annotation in __alloc_skb() pskb_expand_head() triggers a kmemcheck warning when copy of skb_shared_info is done in pskb_expand_head() This is because destructor_arg field is not necessarily initialized at this point. Add kmemcheck_annotate_variable() call in __alloc_skb() to instruct kmemcheck this is a normal situation. Resolves bugzilla.kernel.org 27212 Reference: https://bugzilla.kernel.org/show_bug.cgi?id=27212 Reported-by: Christian Casteyde Signed-off-by: Eric Dumazet CC: Andrew Morton Signed-off-by: David S. Miller --- net/core/skbuff.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 7cd1bc86d59..d883dcc78b6 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -210,6 +210,7 @@ struct sk_buff *__alloc_skb(unsigned int size, gfp_t gfp_mask, shinfo = skb_shinfo(skb); memset(shinfo, 0, offsetof(struct skb_shared_info, dataref)); atomic_set(&shinfo->dataref, 1); + kmemcheck_annotate_variable(shinfo->destructor_arg); if (fclone) { struct sk_buff *child = skb + 1; -- cgit v1.2.3-18-g5258 From 8f2771f2b85aea4d0f9a0137ad3b63d1173c0962 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 27 Jan 2011 14:55:22 -0800 Subject: ipv6: Remove route peer binding assertions. They are bogus. The basic idea is that I wanted to make sure that prefixed routes never bind to peers. The test I used was whether RTF_CACHE was set. But first of all, the RTF_CACHE flag is set at different spots depending upon which ip6_rt_copy() caller you're talking about. I've validated all of the code paths, and even in the future where we bind peers more aggressively (for route metric COW'ing) we never bind to prefix'd routes, only fully specified ones. This even applies when addrconf or icmp6 routes are allocated. Signed-off-by: David S. Miller --- net/ipv6/route.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 1534508f6c6..28a85fc63cb 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -194,7 +194,6 @@ static void ip6_dst_destroy(struct dst_entry *dst) in6_dev_put(idev); } if (peer) { - BUG_ON(!(rt->rt6i_flags & RTF_CACHE)); rt->rt6i_peer = NULL; inet_putpeer(peer); } @@ -204,9 +203,6 @@ void rt6_bind_peer(struct rt6_info *rt, int create) { struct inet_peer *peer; - if (WARN_ON(!(rt->rt6i_flags & RTF_CACHE))) - return; - peer = inet_getpeer_v6(&rt->rt6i_dst.addr, create); if (peer && cmpxchg(&rt->rt6i_peer, NULL, peer) != NULL) inet_putpeer(peer); -- cgit v1.2.3-18-g5258 From dca0d6129f3ec77bcf42ce85bcd64c87e5cf0c04 Mon Sep 17 00:00:00 2001 From: Marek Olšák Date: Thu, 27 Jan 2011 22:46:15 +0100 Subject: drm/radeon/kms: release CMASK access in preclose_kms MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Marek Olšák Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_kms.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c index 98321298cff..8387d32caaa 100644 --- a/drivers/gpu/drm/radeon/radeon_kms.c +++ b/drivers/gpu/drm/radeon/radeon_kms.c @@ -247,6 +247,8 @@ void radeon_driver_preclose_kms(struct drm_device *dev, struct radeon_device *rdev = dev->dev_private; if (rdev->hyperz_filp == file_priv) rdev->hyperz_filp = NULL; + if (rdev->cmask_filp == file_priv) + rdev->cmask_filp = NULL; } /* -- cgit v1.2.3-18-g5258 From 1e644d6dce366a7bae22484f60133b61ba322911 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 27 Jan 2011 17:01:52 -0500 Subject: drm/radeon/kms: re-emit full context state for evergreen blits clear state doesn't seem to work properly in some cases Fixes hangs in heavy 3D on some evergreen cards reported on IRC. May fix: https://bugs.freedesktop.org/show_bug.cgi?id=33381 possibly others. Signed-off-by: Alex Deucher Cc: stable@kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/evergreen_blit_kms.c | 39 ++++++++++++++++++++++++----- 1 file changed, 33 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/radeon/evergreen_blit_kms.c b/drivers/gpu/drm/radeon/evergreen_blit_kms.c index b758dc7f2f2..d4d4db49a8b 100644 --- a/drivers/gpu/drm/radeon/evergreen_blit_kms.c +++ b/drivers/gpu/drm/radeon/evergreen_blit_kms.c @@ -232,7 +232,7 @@ draw_auto(struct radeon_device *rdev) } -/* emits 30 */ +/* emits 34 */ static void set_default_state(struct radeon_device *rdev) { @@ -245,6 +245,8 @@ set_default_state(struct radeon_device *rdev) int num_hs_threads, num_ls_threads; int num_ps_stack_entries, num_vs_stack_entries, num_gs_stack_entries, num_es_stack_entries; int num_hs_stack_entries, num_ls_stack_entries; + u64 gpu_addr; + int dwords; switch (rdev->family) { case CHIP_CEDAR: @@ -497,6 +499,14 @@ set_default_state(struct radeon_device *rdev) radeon_ring_write(rdev, 0x00000000); radeon_ring_write(rdev, 0x00000000); + /* emit an IB pointing at default state */ + dwords = ALIGN(rdev->r600_blit.state_len, 0x10); + gpu_addr = rdev->r600_blit.shader_gpu_addr + rdev->r600_blit.state_offset; + radeon_ring_write(rdev, PACKET3(PACKET3_INDIRECT_BUFFER, 2)); + radeon_ring_write(rdev, gpu_addr & 0xFFFFFFFC); + radeon_ring_write(rdev, upper_32_bits(gpu_addr) & 0xFF); + radeon_ring_write(rdev, dwords); + } static inline uint32_t i2f(uint32_t input) @@ -527,8 +537,10 @@ static inline uint32_t i2f(uint32_t input) int evergreen_blit_init(struct radeon_device *rdev) { u32 obj_size; - int r; + int r, dwords; void *ptr; + u32 packet2s[16]; + int num_packet2s = 0; /* pin copy shader into vram if already initialized */ if (rdev->r600_blit.shader_obj) @@ -536,8 +548,17 @@ int evergreen_blit_init(struct radeon_device *rdev) mutex_init(&rdev->r600_blit.mutex); rdev->r600_blit.state_offset = 0; - rdev->r600_blit.state_len = 0; - obj_size = 0; + + rdev->r600_blit.state_len = evergreen_default_size; + + dwords = rdev->r600_blit.state_len; + while (dwords & 0xf) { + packet2s[num_packet2s++] = PACKET2(0); + dwords++; + } + + obj_size = dwords * 4; + obj_size = ALIGN(obj_size, 256); rdev->r600_blit.vs_offset = obj_size; obj_size += evergreen_vs_size * 4; @@ -567,6 +588,12 @@ int evergreen_blit_init(struct radeon_device *rdev) return r; } + memcpy_toio(ptr + rdev->r600_blit.state_offset, + evergreen_default_state, rdev->r600_blit.state_len * 4); + + if (num_packet2s) + memcpy_toio(ptr + rdev->r600_blit.state_offset + (rdev->r600_blit.state_len * 4), + packet2s, num_packet2s * 4); memcpy(ptr + rdev->r600_blit.vs_offset, evergreen_vs, evergreen_vs_size * 4); memcpy(ptr + rdev->r600_blit.ps_offset, evergreen_ps, evergreen_ps_size * 4); radeon_bo_kunmap(rdev->r600_blit.shader_obj); @@ -652,7 +679,7 @@ int evergreen_blit_prepare_copy(struct radeon_device *rdev, int size_bytes) /* calculate number of loops correctly */ ring_size = num_loops * dwords_per_loop; /* set default + shaders */ - ring_size += 46; /* shaders + def state */ + ring_size += 50; /* shaders + def state */ ring_size += 10; /* fence emit for VB IB */ ring_size += 5; /* done copy */ ring_size += 10; /* fence emit for done copy */ @@ -660,7 +687,7 @@ int evergreen_blit_prepare_copy(struct radeon_device *rdev, int size_bytes) if (r) return r; - set_default_state(rdev); /* 30 */ + set_default_state(rdev); /* 34 */ set_shaders(rdev); /* 16 */ return 0; } -- cgit v1.2.3-18-g5258 From 153e019ff398063b8486acadfad9adb806e99474 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Thu, 27 Jan 2011 10:42:50 +1000 Subject: drm/nv50: fix regression on IGPs Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv50_vm.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nv50_vm.c b/drivers/gpu/drm/nouveau/nv50_vm.c index 38e523e1099..459ff08241e 100644 --- a/drivers/gpu/drm/nouveau/nv50_vm.c +++ b/drivers/gpu/drm/nouveau/nv50_vm.c @@ -45,11 +45,6 @@ nv50_vm_map_pgt(struct nouveau_gpuobj *pgd, u32 pde, } if (phys & 1) { - if (dev_priv->vram_sys_base) { - phys += dev_priv->vram_sys_base; - phys |= 0x30; - } - if (coverage <= 32 * 1024 * 1024) phys |= 0x60; else if (coverage <= 64 * 1024 * 1024) -- cgit v1.2.3-18-g5258 From 0b6bb66d1247601e4a2560bb048d64c606bd7b73 Mon Sep 17 00:00:00 2001 From: Andreas Gruenbacher Date: Wed, 26 Jan 2011 15:55:36 +0100 Subject: Export the augmented rbtree helper functions The augmented rbtree helper functions are not exported to modules right now. (We have started using augmented rbtrees in the upcoming version of drbd.) Signed-off-by: Andreas Gruenbacher Signed-off-by: Linus Torvalds --- lib/rbtree.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/lib/rbtree.c b/lib/rbtree.c index 4693f79195d..a16be19a130 100644 --- a/lib/rbtree.c +++ b/lib/rbtree.c @@ -315,6 +315,7 @@ void rb_augment_insert(struct rb_node *node, rb_augment_f func, void *data) rb_augment_path(node, func, data); } +EXPORT_SYMBOL(rb_augment_insert); /* * before removing the node, find the deepest node on the rebalance path @@ -340,6 +341,7 @@ struct rb_node *rb_augment_erase_begin(struct rb_node *node) return deepest; } +EXPORT_SYMBOL(rb_augment_erase_begin); /* * after removal, update the tree to account for the removed entry @@ -350,6 +352,7 @@ void rb_augment_erase_end(struct rb_node *node, rb_augment_f func, void *data) if (node) rb_augment_path(node, func, data); } +EXPORT_SYMBOL(rb_augment_erase_end); /* * This function returns the first node (in sort order) of the tree. -- cgit v1.2.3-18-g5258 From 195938753951e70e85303301c37906c7ad72645e Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Thu, 27 Jan 2011 10:28:46 +0100 Subject: ALSA: HDA: Fix microphone(s) on Lenovo Edge 13 BugLink: http://bugs.launchpad.net/bugs/708521 This Edge 13 model has an internal mic at 0x1a and should therefore use the asus quirk. Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_conexant.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 9867afc7895..7e1ca43bd66 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -3120,6 +3120,7 @@ static struct snd_pci_quirk cxt5066_cfg_tbl[] = { SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT5066_OLPC_XO_1_5), SND_PCI_QUIRK(0x17aa, 0x20f2, "Lenovo T400s", CXT5066_THINKPAD), SND_PCI_QUIRK(0x17aa, 0x21c5, "Thinkpad Edge 13", CXT5066_THINKPAD), + SND_PCI_QUIRK(0x17aa, 0x21c6, "Thinkpad Edge 13", CXT5066_ASUS), SND_PCI_QUIRK(0x17aa, 0x215e, "Lenovo Thinkpad", CXT5066_THINKPAD), SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo G560", CXT5066_ASUS), SND_PCI_QUIRK_VENDOR(0x17aa, "Lenovo", CXT5066_IDEAPAD), /* Fallback for Lenovos without dock mic */ -- cgit v1.2.3-18-g5258 From 77c5fd19075d299fe820bb59bb21b0b113676e20 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 9 Jan 2011 17:48:20 -0500 Subject: pata_mpc52xx: inherit from ata_bmdma_port_ops pata_mpc52xx supports BMDMA but inherits ata_sff_port_ops which triggers BUG_ON() when a DMA command is issued. Fix it. Signed-off-by: Tejun Heo Reported-by: Roman Fietze Cc: Sergei Shtylyov Cc: stable@kernel.org Signed-off-by: Jeff Garzik --- drivers/ata/pata_mpc52xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c index 8cc536e49a0..d7d8026cde9 100644 --- a/drivers/ata/pata_mpc52xx.c +++ b/drivers/ata/pata_mpc52xx.c @@ -610,7 +610,7 @@ static struct scsi_host_template mpc52xx_ata_sht = { }; static struct ata_port_operations mpc52xx_ata_port_ops = { - .inherits = &ata_sff_port_ops, + .inherits = &ata_bmdma_port_ops, .sff_dev_select = mpc52xx_ata_dev_select, .set_piomode = mpc52xx_ata_set_piomode, .set_dmamode = mpc52xx_ata_set_dmamode, -- cgit v1.2.3-18-g5258 From bfdd7c58cf3392333bba161491a2ef0741b970ba Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Mon, 10 Jan 2011 21:34:27 +0300 Subject: pata_hpt{366|37x}: use pr_warning(...) instead of printk(KERN_WARNING ...) ... in hpt_dma_blacklisted(). Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik --- drivers/ata/pata_hpt366.c | 6 +++--- drivers/ata/pata_hpt37x.c | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index d7e57db36bc..538ec38ba99 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c @@ -25,7 +25,7 @@ #include #define DRV_NAME "pata_hpt366" -#define DRV_VERSION "0.6.9" +#define DRV_VERSION "0.6.10" struct hpt_clock { u8 xfer_mode; @@ -160,8 +160,8 @@ static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr, while (list[i] != NULL) { if (!strcmp(list[i], model_num)) { - printk(KERN_WARNING DRV_NAME ": %s is not supported for %s.\n", - modestr, list[i]); + pr_warning(DRV_NAME ": %s is not supported for %s.\n", + modestr, list[i]); return 1; } i++; diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index efdd18bc866..a1f830eaa7c 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -24,7 +24,7 @@ #include #define DRV_NAME "pata_hpt37x" -#define DRV_VERSION "0.6.18" +#define DRV_VERSION "0.6.19" struct hpt_clock { u8 xfer_speed; @@ -229,8 +229,8 @@ static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr, while (list[i] != NULL) { if (!strcmp(list[i], model_num)) { - printk(KERN_WARNING DRV_NAME ": %s is not supported for %s.\n", - modestr, list[i]); + pr_warning(DRV_NAME ": %s is not supported for %s.\n", + modestr, list[i]); return 1; } i++; -- cgit v1.2.3-18-g5258 From 40d69ba029c8d5de51aaeb5358999266c482d00a Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Mon, 10 Jan 2011 21:39:34 +0300 Subject: pata_hpt{37x|3x2n}: use pr_*(DRV_NAME ...) instead of printk(KERN_* ...) ... the same as the 'pata_hpt366' driver does. Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik --- drivers/ata/pata_hpt37x.c | 22 +++++++++++----------- drivers/ata/pata_hpt3x2n.c | 12 +++++------- 2 files changed, 16 insertions(+), 18 deletions(-) diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index a1f830eaa7c..6003a34d614 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -24,7 +24,7 @@ #include #define DRV_NAME "pata_hpt37x" -#define DRV_VERSION "0.6.19" +#define DRV_VERSION "0.6.20" struct hpt_clock { u8 xfer_speed; @@ -863,7 +863,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) chip_table = &hpt372; break; default: - printk(KERN_ERR "pata_hpt37x: Unknown HPT366 subtype, " + pr_err(DRV_NAME ": Unknown HPT366 subtype, " "please report (%d).\n", rev); return -ENODEV; } @@ -906,8 +906,8 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) *ppi = &info_hpt374_fn1; break; default: - printk(KERN_ERR - "pata_hpt37x: PCI table is bogus, please report (%d).\n", + pr_err(DRV_NAME + ": PCI table is bogus, please report (%d).\n", dev->device); return -ENODEV; } @@ -957,8 +957,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) u8 sr; u32 total = 0; - printk(KERN_WARNING - "pata_hpt37x: BIOS has not set timing clocks.\n"); + pr_warning(DRV_NAME ": BIOS has not set timing clocks.\n"); /* This is the process the HPT371 BIOS is reported to use */ for (i = 0; i < 128; i++) { @@ -1014,7 +1013,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) (f_high << 16) | f_low | 0x100); } if (adjust == 8) { - printk(KERN_ERR "pata_hpt37x: DPLL did not stabilize!\n"); + pr_err(DRV_NAME ": DPLL did not stabilize!\n"); return -ENODEV; } if (dpll == 3) @@ -1022,8 +1021,8 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) else private_data = (void *)hpt37x_timings_50; - printk(KERN_INFO "pata_hpt37x: bus clock %dMHz, using %dMHz DPLL.\n", - MHz[clock_slot], MHz[dpll]); + pr_info(DRV_NAME ": bus clock %dMHz, using %dMHz DPLL.\n", + MHz[clock_slot], MHz[dpll]); } else { private_data = (void *)chip_table->clocks[clock_slot]; /* @@ -1036,8 +1035,9 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) ppi[0] = &info_hpt370_33; if (clock_slot < 2 && ppi[0] == &info_hpt370a) ppi[0] = &info_hpt370a_33; - printk(KERN_INFO "pata_hpt37x: %s using %dMHz bus clock.\n", - chip_table->name, MHz[clock_slot]); + + pr_info(DRV_NAME ": %s using %dMHz bus clock.\n", + chip_table->name, MHz[clock_slot]); } /* Now kick off ATA set up */ diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c index d2239bbdb79..eca68caf5f4 100644 --- a/drivers/ata/pata_hpt3x2n.c +++ b/drivers/ata/pata_hpt3x2n.c @@ -25,7 +25,7 @@ #include #define DRV_NAME "pata_hpt3x2n" -#define DRV_VERSION "0.3.13" +#define DRV_VERSION "0.3.14" enum { HPT_PCI_FAST = (1 << 31), @@ -418,7 +418,7 @@ static int hpt3x2n_pci_clock(struct pci_dev *pdev) u16 sr; u32 total = 0; - printk(KERN_WARNING "pata_hpt3x2n: BIOS clock data not set.\n"); + pr_warning(DRV_NAME ": BIOS clock data not set.\n"); /* This is the process the HPT371 BIOS is reported to use */ for (i = 0; i < 128; i++) { @@ -528,8 +528,7 @@ hpt372n: ppi[0] = &info_hpt372n; break; default: - printk(KERN_ERR - "pata_hpt3x2n: PCI table is bogus please report (%d).\n", + pr_err(DRV_NAME ": PCI table is bogus, please report (%d).\n", dev->device); return -ENODEV; } @@ -579,12 +578,11 @@ hpt372n: pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low); } if (adjust == 8) { - printk(KERN_ERR "pata_hpt3x2n: DPLL did not stabilize!\n"); + pr_err(DRV_NAME ": DPLL did not stabilize!\n"); return -ENODEV; } - printk(KERN_INFO "pata_hpt37x: bus clock %dMHz, using 66MHz DPLL.\n", - pci_mhz); + pr_info(DRV_NAME ": bus clock %dMHz, using 66MHz DPLL.\n", pci_mhz); /* * Set our private data up. We only need a few flags -- cgit v1.2.3-18-g5258 From 910f7bb164fa888ff925e337bf8fd479abb157f9 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Mon, 10 Jan 2011 22:31:13 +0300 Subject: pata_hpt37x: fold 'if' statement into 'switch' hpt37x_init_one() has a large *if* statement which should really be folded into the *switch* statement that currently constitutes its *else* branch, reducing one level of indentation... Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik --- drivers/ata/pata_hpt37x.c | 89 +++++++++++++++++++++++------------------------ 1 file changed, 43 insertions(+), 46 deletions(-) diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 6003a34d614..29d8adc5273 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -24,7 +24,7 @@ #include #define DRV_NAME "pata_hpt37x" -#define DRV_VERSION "0.6.20" +#define DRV_VERSION "0.6.21" struct hpt_clock { u8 xfer_speed; @@ -838,7 +838,8 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) if (rc) return rc; - if (dev->device == PCI_DEVICE_ID_TTI_HPT366) { + switch (dev->device) { + case PCI_DEVICE_ID_TTI_HPT366: /* May be a later chip in disguise. Check */ /* Older chips are in the HPT366 driver. Ignore them */ if (rev < 3) @@ -867,50 +868,46 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) "please report (%d).\n", rev); return -ENODEV; } - } else { - switch (dev->device) { - case PCI_DEVICE_ID_TTI_HPT372: - /* 372N if rev >= 2 */ - if (rev >= 2) - return -ENODEV; - ppi[0] = &info_hpt372; - chip_table = &hpt372a; - break; - case PCI_DEVICE_ID_TTI_HPT302: - /* 302N if rev > 1 */ - if (rev > 1) - return -ENODEV; - ppi[0] = &info_hpt302; - /* Check this */ - chip_table = &hpt302; - break; - case PCI_DEVICE_ID_TTI_HPT371: - if (rev > 1) - return -ENODEV; - ppi[0] = &info_hpt302; - chip_table = &hpt371; - /* - * Single channel device, master is not present - * but the BIOS (or us for non x86) must mark it - * absent - */ - pci_read_config_byte(dev, 0x50, &mcr1); - mcr1 &= ~0x04; - pci_write_config_byte(dev, 0x50, mcr1); - break; - case PCI_DEVICE_ID_TTI_HPT374: - chip_table = &hpt374; - if (!(PCI_FUNC(dev->devfn) & 1)) - *ppi = &info_hpt374_fn0; - else - *ppi = &info_hpt374_fn1; - break; - default: - pr_err(DRV_NAME - ": PCI table is bogus, please report (%d).\n", - dev->device); - return -ENODEV; - } + break; + case PCI_DEVICE_ID_TTI_HPT372: + /* 372N if rev >= 2 */ + if (rev >= 2) + return -ENODEV; + ppi[0] = &info_hpt372; + chip_table = &hpt372a; + break; + case PCI_DEVICE_ID_TTI_HPT302: + /* 302N if rev > 1 */ + if (rev > 1) + return -ENODEV; + ppi[0] = &info_hpt302; + /* Check this */ + chip_table = &hpt302; + break; + case PCI_DEVICE_ID_TTI_HPT371: + if (rev > 1) + return -ENODEV; + ppi[0] = &info_hpt302; + chip_table = &hpt371; + /* + * Single channel device, master is not present but the BIOS + * (or us for non x86) must mark it absent + */ + pci_read_config_byte(dev, 0x50, &mcr1); + mcr1 &= ~0x04; + pci_write_config_byte(dev, 0x50, mcr1); + break; + case PCI_DEVICE_ID_TTI_HPT374: + chip_table = &hpt374; + if (!(PCI_FUNC(dev->devfn) & 1)) + *ppi = &info_hpt374_fn0; + else + *ppi = &info_hpt374_fn1; + break; + default: + pr_err(DRV_NAME ": PCI table is bogus, please report (%d).\n", + dev->device); + return -ENODEV; } /* Ok so this is a chip we support */ -- cgit v1.2.3-18-g5258 From a4a461a6df6c0481d5a3d61660ed97f5b539cf16 Mon Sep 17 00:00:00 2001 From: Seth Heasley Date: Mon, 10 Jan 2011 12:57:17 -0800 Subject: ahci: AHCI mode SATA patch for Intel DH89xxCC DeviceIDs This patch adds the AHCI-mode SATA DeviceID for the Intel DH89xxCC PCH. Signed-off-by: Seth Heasley Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 328826381a2..3a43b116783 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -260,6 +260,7 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(INTEL, 0x1d02), board_ahci }, /* PBG AHCI */ { PCI_VDEVICE(INTEL, 0x1d04), board_ahci }, /* PBG RAID */ { PCI_VDEVICE(INTEL, 0x1d06), board_ahci }, /* PBG RAID */ + { PCI_VDEVICE(INTEL, 0x2323), board_ahci }, /* DH89xxCC AHCI */ /* JMicron 360/1/3/5/6, match class to avoid IDE function */ { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, -- cgit v1.2.3-18-g5258 From defed5593149e65cd7b7eaa32ccbf2e795ea55f1 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 11 Jan 2011 21:01:23 +0300 Subject: pata_hpt37x: inherit prereset() method for HPT374 Commit ab81a505ae6be069be5b67acd7e1bab3cfb53968 (pata_hpt37x: unify ->pre_reset methods) neglected to remove the initializer for the prereset() method from 'hpt374_fn1_port_ops' (it's inherited from 'hpt372_port_ops' anyway), as well as to update the comment in hpt37x_init_one()... Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik --- drivers/ata/pata_hpt37x.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 29d8adc5273..4c5b5183225 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -24,7 +24,7 @@ #include #define DRV_NAME "pata_hpt37x" -#define DRV_VERSION "0.6.21" +#define DRV_VERSION "0.6.22" struct hpt_clock { u8 xfer_speed; @@ -642,7 +642,6 @@ static struct ata_port_operations hpt372_port_ops = { static struct ata_port_operations hpt374_fn1_port_ops = { .inherits = &hpt372_port_ops, .cable_detect = hpt374_fn1_cable_detect, - .prereset = hpt37x_pre_reset, }; /** @@ -803,7 +802,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) .udma_mask = ATA_UDMA6, .port_ops = &hpt302_port_ops }; - /* HPT374 - UDMA100, function 1 uses different prereset method */ + /* HPT374 - UDMA100, function 1 uses different cable_detect method */ static const struct ata_port_info info_hpt374_fn0 = { .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = ATA_PIO4, -- cgit v1.2.3-18-g5258 From 10aca06c82a85fe7dcb3d8ad1b0b66e8635c8b8b Mon Sep 17 00:00:00 2001 From: Anssi Hannula Date: Tue, 18 Jan 2011 20:03:26 -0500 Subject: ahci: add HFLAG_YES_FBS and apply it to 88SE9128 Commit 5f173107ecad83a50 added HFLAG_YES_FBS workaround for 88SE9128 (1b4b:9123). However, that change inadvertently caused the legacy IDE interface of the controller (with the same pci id) to become associated with the AHCI driver as well, causing the driver to try to bring the interface up in vain. Fix that by matching against class as well. Signed-off-by: Anssi Hannula Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 3a43b116783..b8d96ce37fc 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -380,6 +380,8 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */ { PCI_VDEVICE(MARVELL, 0x6121), board_ahci_mv }, /* 6121 */ { PCI_DEVICE(0x1b4b, 0x9123), + .class = PCI_CLASS_STORAGE_SATA_AHCI, + .class_mask = 0xffffff, .driver_data = board_ahci_yes_fbs }, /* 88se9128 */ /* Promise */ -- cgit v1.2.3-18-g5258 From 4a5610a04d415ed94af75bb1159d2621d62c8328 Mon Sep 17 00:00:00 2001 From: Francesco Antonacci Date: Tue, 25 Jan 2011 11:54:43 +0100 Subject: libata: DVR-212D can't do SETXFER DVD-RW DVR-212D PIONEER DVR-212D can't do SETXFER like its sibling DVRTD08. Add ATA_HORKAGE_NOSETXFER for it. Reported in bko#27502. https://bugzilla.kernel.org/show_bug.cgi?id=27502 Signed-off-by: Francesco Antonacci Acked-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index a31fe96f7de..d4e52e21485 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4138,6 +4138,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { * device and controller are SATA. */ { "PIONEER DVD-RW DVRTD08", "1.00", ATA_HORKAGE_NOSETXFER }, + { "PIONEER DVD-RW DVR-212D", "1.28", ATA_HORKAGE_NOSETXFER }, /* End Marker */ { } -- cgit v1.2.3-18-g5258 From 729a6a300e628a48cf12bac93a964a535e83cd1d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 20 Jan 2011 13:59:06 +0100 Subject: libata: set queue DMA alignment to sector size for ATAPI too ata_pio_sectors() expects buffer for each sector to be contained in a single page; otherwise, it ends up overrunning the first page. This is achieved by setting queue DMA alignment. If sector_size is smaller than PAGE_SIZE and all buffers are sector_size aligned, buffer for each sector is always contained in a single page. This wasn't applied to ATAPI devices but IDENTIFY_PACKET is executed as ATA_PROT_PIO and thus uses ata_pio_sectors(). Newer versions of udev issue IDENTIFY_PACKET with unaligned buffer triggering the problem and causing oops. This patch fixes the problem by setting sdev->sector_size to ATA_SECT_SIZE on ATATPI devices and always setting DMA alignment to sector_size. While at it, add a warning for the unlikely but still possible scenario where sector_size is larger than PAGE_SIZE, in which case the alignment wouldn't be enough. Signed-off-by: Tejun Heo Reported-by: John Stanley Tested-by: John Stanley Cc: stable@kernel.org Signed-off-by: Jeff Garzik --- drivers/ata/libata-scsi.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 5defc74973d..600f6353ecf 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1099,9 +1099,9 @@ static int ata_scsi_dev_config(struct scsi_device *sdev, struct request_queue *q = sdev->request_queue; void *buf; - /* set the min alignment and padding */ - blk_queue_update_dma_alignment(sdev->request_queue, - ATA_DMA_PAD_SZ - 1); + sdev->sector_size = ATA_SECT_SIZE; + + /* set DMA padding */ blk_queue_update_dma_pad(sdev->request_queue, ATA_DMA_PAD_SZ - 1); @@ -1115,13 +1115,25 @@ static int ata_scsi_dev_config(struct scsi_device *sdev, blk_queue_dma_drain(q, atapi_drain_needed, buf, ATAPI_MAX_DRAIN); } else { - /* ATA devices must be sector aligned */ sdev->sector_size = ata_id_logical_sector_size(dev->id); - blk_queue_update_dma_alignment(sdev->request_queue, - sdev->sector_size - 1); sdev->manage_start_stop = 1; } + /* + * ata_pio_sectors() expects buffer for each sector to not cross + * page boundary. Enforce it by requiring buffers to be sector + * aligned, which works iff sector_size is not larger than + * PAGE_SIZE. ATAPI devices also need the alignment as + * IDENTIFY_PACKET is executed as ATA_PROT_PIO. + */ + if (sdev->sector_size > PAGE_SIZE) + ata_dev_printk(dev, KERN_WARNING, + "sector_size=%u > PAGE_SIZE, PIO may malfunction\n", + sdev->sector_size); + + blk_queue_update_dma_alignment(sdev->request_queue, + sdev->sector_size - 1); + if (dev->flags & ATA_DFLAG_AN) set_bit(SDEV_EVT_MEDIA_CHANGE, sdev->supported_events); -- cgit v1.2.3-18-g5258 From 5f92acc896564ac91df84cc133d09f9820f00061 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Fri, 28 Jan 2011 03:23:42 -0500 Subject: Delete zero-length drivers/staging/vme/bridges/Module.symvers Signed-off-by: Jeff Garzik --- drivers/staging/vme/bridges/Module.symvers | 0 1 file changed, 0 insertions(+), 0 deletions(-) delete mode 100644 drivers/staging/vme/bridges/Module.symvers diff --git a/drivers/staging/vme/bridges/Module.symvers b/drivers/staging/vme/bridges/Module.symvers deleted file mode 100644 index e69de29bb2d..00000000000 -- cgit v1.2.3-18-g5258 From 0fa63b69284c9bbedf876c677a9e650243cc40be Mon Sep 17 00:00:00 2001 From: "Manjunathappa, Prakash" Date: Thu, 27 Jan 2011 19:17:43 +0530 Subject: ASoC: DaVinci: fix kernel panic due to uninitialized platform_data This patch fixes the Kernel panic issue on accessing davinci_vc in cq93vc_probe function. struct davinci_vc is part of platform device's private driver data(codec->dev->p->driver_data) and this is populated by DaVinci Voice Codec MFD driver. Signed-off-by: Manjunathappa, Prakash Signed-off-by: Mark Brown --- sound/soc/codecs/cq93vc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/cq93vc.c b/sound/soc/codecs/cq93vc.c index 46dbfd067f7..347a567b01e 100644 --- a/sound/soc/codecs/cq93vc.c +++ b/sound/soc/codecs/cq93vc.c @@ -153,7 +153,7 @@ static int cq93vc_resume(struct snd_soc_codec *codec) static int cq93vc_probe(struct snd_soc_codec *codec) { - struct davinci_vc *davinci_vc = codec->dev->platform_data; + struct davinci_vc *davinci_vc = snd_soc_codec_get_drvdata(codec); davinci_vc->cq93vc.codec = codec; codec->control_data = davinci_vc; -- cgit v1.2.3-18-g5258 From 026a2078791b64aede220b1b1a3e4dfe4ab175e7 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Wed, 26 Jan 2011 13:41:05 +0100 Subject: microblaze: Fix DTB passing from bootloader Little endian system needs to check OF_DT_HEADER but it is swapped because it is in big-endian. Microblaze LE provides lwr instruction which loads magic number in BIG endian format which can be compared. There is used the fact that if you write 0x1 as word and load it as byte then you get for big-endian zero and 1 for little-endian. Signed-off-by: Michal Simek --- arch/microblaze/kernel/head.S | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S index 42434008209..0db20b5abb5 100644 --- a/arch/microblaze/kernel/head.S +++ b/arch/microblaze/kernel/head.S @@ -77,8 +77,18 @@ real_start: We ensure r7 points to a valid FDT, just in case the bootloader is broken or non-existent */ beqi r7, no_fdt_arg /* NULL pointer? don't copy */ - lw r11, r0, r7 /* Does r7 point to a */ - rsubi r11, r11, OF_DT_HEADER /* valid FDT? */ +/* Does r7 point to a valid FDT? Load HEADER magic number */ + /* Run time Big/Little endian platform */ + /* Save 1 as word and load byte - 0 - BIG, 1 - LITTLE */ + addik r11, r0, 0x1 /* BIG/LITTLE checking value */ + /* __bss_start will be zeroed later - it is just temp location */ + swi r11, r0, TOPHYS(__bss_start) + lbui r11, r0, TOPHYS(__bss_start) + beqid r11, big_endian /* DO NOT break delay stop dependency */ + lw r11, r0, r7 /* Big endian load in delay slot */ + lwr r11, r0, r7 /* Little endian load */ +big_endian: + rsubi r11, r11, OF_DT_HEADER /* Check FDT header */ beqi r11, _prepare_copy_fdt or r7, r0, r0 /* clear R7 when not valid DTB */ bnei r11, no_fdt_arg /* No - get out of here */ -- cgit v1.2.3-18-g5258 From 9c749e177ccc0b3ee9589425c7255079e7a726fc Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 28 Jan 2011 13:14:58 +0100 Subject: microblaze: Fix unaligned issue on MMU system with BS=0 DIV=1 Unaligned code use shift for finding register operand. There is used BSRLI(r8,r8,2) macro which is expand for BS=0, DIV=1 by ori rD, r0, (1 << imm); \ idivu rD, rD, rA but if rD is equal rA then ori instruction rewrite value which should be devide. The patch remove this macro which use idivu instruction because idivu takes 32/34 cycles. The highest shifting is 20 which takes 20 cycles. Signed-off-by: Michal Simek --- arch/microblaze/kernel/hw_exception_handler.S | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S index 25f6e07d8de..782680de312 100644 --- a/arch/microblaze/kernel/hw_exception_handler.S +++ b/arch/microblaze/kernel/hw_exception_handler.S @@ -147,10 +147,6 @@ #if CONFIG_XILINX_MICROBLAZE0_USE_BARREL > 0 #define BSRLI(rD, rA, imm) \ bsrli rD, rA, imm - #elif CONFIG_XILINX_MICROBLAZE0_USE_DIV > 0 - #define BSRLI(rD, rA, imm) \ - ori rD, r0, (1 << imm); \ - idivu rD, rD, rA #else #define BSRLI(rD, rA, imm) BSRLI ## imm (rD, rA) /* Only the used shift constants defined here - add more if needed */ -- cgit v1.2.3-18-g5258 From de93c3c119382cb888ca8a94b642dbcf8035525e Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 28 Jan 2011 13:26:54 +0100 Subject: microblaze: Fix ASM optimized code for LE Microblaze little-endian doesn't support ASM optimized library functions(memcpy/memmove). Kconfig doens't contain any information about endian that's why it is necessary to check it in the source code. The code is used with barrel shifter is used. Signed-off-by: Michal Simek --- arch/microblaze/lib/fastcopy.S | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/microblaze/lib/fastcopy.S b/arch/microblaze/lib/fastcopy.S index fdc48bb065d..62021d7e249 100644 --- a/arch/microblaze/lib/fastcopy.S +++ b/arch/microblaze/lib/fastcopy.S @@ -29,6 +29,10 @@ * between mem locations with size of xfer spec'd in bytes */ +#ifdef __MICROBLAZEEL__ +#error Microblaze LE not support ASM optimized lib func. Disable OPT_LIB_ASM. +#endif + #include .text .globl memcpy -- cgit v1.2.3-18-g5258 From e9cf7049330cd44c8af43b0c5c7bef25a086c5b7 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Thu, 27 Jan 2011 14:54:05 -0700 Subject: ASoC: Fix mask/val_mask confusion snd_soc_dapm_put_volsw() snd_soc_dapm_put_volsw() has variables for both the unshifted and shifted mask for updates commit 97404f (ASoC: Do DAPM control updates in the middle of DAPM sequences) got confused between the two of these. Since there's no need to keep a copy of the unshifted mask fix this and simplify the code by using only one mask variable. [Completely rewrote the changelog to describe the issue -- broonie.] Signed-off-by: Stephen Warren Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/soc-dapm.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 499730ab563..8194f150bab 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -1742,7 +1742,7 @@ int snd_soc_dapm_put_volsw(struct snd_kcontrol *kcontrol, int max = mc->max; unsigned int mask = (1 << fls(max)) - 1; unsigned int invert = mc->invert; - unsigned int val, val_mask; + unsigned int val; int connect, change; struct snd_soc_dapm_update update; @@ -1750,13 +1750,13 @@ int snd_soc_dapm_put_volsw(struct snd_kcontrol *kcontrol, if (invert) val = max - val; - val_mask = mask << shift; + mask = mask << shift; val = val << shift; mutex_lock(&widget->codec->mutex); widget->value = val; - change = snd_soc_test_bits(widget->codec, reg, val_mask, val); + change = snd_soc_test_bits(widget->codec, reg, mask, val); if (change) { if (val) /* new connection */ -- cgit v1.2.3-18-g5258 From e34a314c5e49fe6b763568f6576b19f1299c33c2 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Thu, 27 Jan 2011 12:13:35 +1100 Subject: xfs: fix efi item leak on forced shutdown After test 139, kmemleak shows: unreferenced object 0xffff880078b405d8 (size 400): comm "xfs_io", pid 4904, jiffies 4294909383 (age 1186.728s) hex dump (first 32 bytes): 60 c1 17 79 00 88 ff ff 60 c1 17 79 00 88 ff ff `..y....`..y.... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [] kmemleak_alloc+0x2d/0x60 [] kmem_cache_alloc+0x13f/0x2b0 [] kmem_zone_alloc+0x77/0xf0 [] kmem_zone_zalloc+0x1e/0x50 [] xfs_efi_init+0x4b/0xb0 [] xfs_trans_get_efi+0x58/0x90 [] xfs_bmap_finish+0x8b/0x1d0 [] xfs_itruncate_finish+0x2c4/0x5d0 [] xfs_setattr+0x8df/0xa70 [] xfs_vn_setattr+0x1b/0x20 [] notify_change+0x170/0x2e0 [] do_truncate+0x66/0xa0 [] sys_ftruncate+0xdb/0xe0 [] system_call_fastpath+0x16/0x1b [] 0xffffffffffffffff The cause of the leak is that the "remove" parameter of IOP_UNPIN() is never set when a CIL push is aborted. This means that the EFI item is never freed if it was in the push being cancelled. The problem is specific to delayed logging, but has uncovered a couple of problems with the handling of IOP_UNPIN(remove). Firstly, we cannot safely call xfs_trans_del_item() from IOP_UNPIN() in the CIL commit failure path or the iclog write failure path because for delayed loging we have no transaction context. Hence we must only call xfs_trans_del_item() if the log item being unpinned has an active log item descriptor. Secondly, xfs_trans_uncommit() does not handle log item descriptor freeing during the traversal of log items on a transaction. It can reference a freed log item descriptor when unpinning an EFI item. Hence it needs to use a safe list traversal method to allow items to be removed from the transaction during IOP_UNPIN(). Signed-off-by: Dave Chinner Reviewed-by: Alex Elder --- fs/xfs/xfs_buf_item.c | 12 +++++++----- fs/xfs/xfs_extfree_item.c | 3 ++- fs/xfs/xfs_trans.c | 36 +++++++++++++++++++++++++++++------- 3 files changed, 38 insertions(+), 13 deletions(-) diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c index 98c6f73b675..6f8c21ce0d6 100644 --- a/fs/xfs/xfs_buf_item.c +++ b/fs/xfs/xfs_buf_item.c @@ -427,13 +427,15 @@ xfs_buf_item_unpin( if (remove) { /* - * We have to remove the log item from the transaction - * as we are about to release our reference to the - * buffer. If we don't, the unlock that occurs later - * in xfs_trans_uncommit() will ry to reference the + * If we are in a transaction context, we have to + * remove the log item from the transaction as we are + * about to release our reference to the buffer. If we + * don't, the unlock that occurs later in + * xfs_trans_uncommit() will try to reference the * buffer which we no longer have a hold on. */ - xfs_trans_del_item(lip); + if (lip->li_desc) + xfs_trans_del_item(lip); /* * Since the transaction no longer refers to the buffer, diff --git a/fs/xfs/xfs_extfree_item.c b/fs/xfs/xfs_extfree_item.c index 75f2ef60e57..d22e6262343 100644 --- a/fs/xfs/xfs_extfree_item.c +++ b/fs/xfs/xfs_extfree_item.c @@ -138,7 +138,8 @@ xfs_efi_item_unpin( if (remove) { ASSERT(!(lip->li_flags & XFS_LI_IN_AIL)); - xfs_trans_del_item(lip); + if (lip->li_desc) + xfs_trans_del_item(lip); xfs_efi_item_free(efip); return; } diff --git a/fs/xfs/xfs_trans.c b/fs/xfs/xfs_trans.c index 33dbc4e0ad6..29f5e542489 100644 --- a/fs/xfs/xfs_trans.c +++ b/fs/xfs/xfs_trans.c @@ -1446,6 +1446,14 @@ xfs_log_item_batch_insert( * Bulk operation version of xfs_trans_committed that takes a log vector of * items to insert into the AIL. This uses bulk AIL insertion techniques to * minimise lock traffic. + * + * If we are called with the aborted flag set, it is because a log write during + * a CIL checkpoint commit has failed. In this case, all the items in the + * checkpoint have already gone through IOP_COMMITED and IOP_UNLOCK, which + * means that checkpoint commit abort handling is treated exactly the same + * as an iclog write error even though we haven't started any IO yet. Hence in + * this case all we need to do is IOP_COMMITTED processing, followed by an + * IOP_UNPIN(aborted) call. */ void xfs_trans_committed_bulk( @@ -1472,6 +1480,16 @@ xfs_trans_committed_bulk( if (XFS_LSN_CMP(item_lsn, (xfs_lsn_t)-1) == 0) continue; + /* + * if we are aborting the operation, no point in inserting the + * object into the AIL as we are in a shutdown situation. + */ + if (aborted) { + ASSERT(XFS_FORCED_SHUTDOWN(ailp->xa_mount)); + IOP_UNPIN(lip, 1); + continue; + } + if (item_lsn != commit_lsn) { /* @@ -1503,20 +1521,24 @@ xfs_trans_committed_bulk( } /* - * Called from the trans_commit code when we notice that - * the filesystem is in the middle of a forced shutdown. + * Called from the trans_commit code when we notice that the filesystem is in + * the middle of a forced shutdown. + * + * When we are called here, we have already pinned all the items in the + * transaction. However, neither IOP_COMMITTING or IOP_UNLOCK has been called + * so we can simply walk the items in the transaction, unpin them with an abort + * flag and then free the items. Note that unpinning the items can result in + * them being freed immediately, so we need to use a safe list traversal method + * here. */ STATIC void xfs_trans_uncommit( struct xfs_trans *tp, uint flags) { - struct xfs_log_item_desc *lidp; + struct xfs_log_item_desc *lidp, *n; - list_for_each_entry(lidp, &tp->t_items, lid_trans) { - /* - * Unpin all but those that aren't dirty. - */ + list_for_each_entry_safe(lidp, n, &tp->t_items, lid_trans) { if (lidp->lid_flags & XFS_LID_DIRTY) IOP_UNPIN(lidp->lid_item, 1); } -- cgit v1.2.3-18-g5258 From b8fc82630ae289bb4e661567808afc59e3298dce Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Thu, 27 Jan 2011 12:14:12 +1100 Subject: xfs: speculative delayed allocation uses rounddown_power_of_2 badly rounddown_power_of_2() returns an undefined result when passed a value of zero. The specualtive delayed allocation code is doing this when the inode is zero length. Hence occasionally the preallocation is much, much larger than is necessary (e.g. 8GB for a 270 _byte_ file). Ensure we don't even pass a zero value to this function so the result of preallocation is always the desired size. Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig Reviewed-by: Alex Elder --- fs/xfs/xfs_iomap.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c index 55582bd6665..8a0f044750c 100644 --- a/fs/xfs/xfs_iomap.c +++ b/fs/xfs/xfs_iomap.c @@ -337,7 +337,12 @@ xfs_iomap_prealloc_size( int shift = 0; int64_t freesp; - alloc_blocks = XFS_B_TO_FSB(mp, ip->i_size); + /* + * rounddown_pow_of_two() returns an undefined result + * if we pass in alloc_blocks = 0. Hence the "+ 1" to + * ensure we always pass in a non-zero value. + */ + alloc_blocks = XFS_B_TO_FSB(mp, ip->i_size) + 1; alloc_blocks = XFS_FILEOFF_MIN(MAXEXTLEN, rounddown_pow_of_two(alloc_blocks)); -- cgit v1.2.3-18-g5258 From 14b064ceaa6f51a7426cc45b4b43685b94380658 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Thu, 27 Jan 2011 12:16:28 +1100 Subject: xfs: limit extent length for allocation to AG size Delayed allocation extents can be larger than AGs, so when trying to convert a large range we may scan every AG inside xfs_bmap_alloc_nullfb() trying to find an AG with a size larger than an AG. We should stop when we find the first AG with a maximum possible allocation size. This causes excessive CPU usage when there are lots of AGs. The same problem occurs when doing preallocation of a range larger than an AG. Fix the problem by limiting real allocation lengths to the maximum that an AG can support. This means if we have empty AGs, we'll stop the search at the first of them. If there are no empty AGs, we'll still scan them all, but that is a different problem.... Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig Reviewed-by: Alex Elder --- fs/xfs/xfs_alloc.h | 16 ++++++++++++++++ fs/xfs/xfs_bmap.c | 18 ++++++++++-------- 2 files changed, 26 insertions(+), 8 deletions(-) diff --git a/fs/xfs/xfs_alloc.h b/fs/xfs/xfs_alloc.h index 0ab56b32c7e..d0b3bc72005 100644 --- a/fs/xfs/xfs_alloc.h +++ b/fs/xfs/xfs_alloc.h @@ -74,6 +74,22 @@ typedef unsigned int xfs_alloctype_t; */ #define XFS_ALLOC_SET_ASIDE(mp) (4 + ((mp)->m_sb.sb_agcount * 4)) +/* + * When deciding how much space to allocate out of an AG, we limit the + * allocation maximum size to the size the AG. However, we cannot use all the + * blocks in the AG - some are permanently used by metadata. These + * blocks are generally: + * - the AG superblock, AGF, AGI and AGFL + * - the AGF (bno and cnt) and AGI btree root blocks + * - 4 blocks on the AGFL according to XFS_ALLOC_SET_ASIDE() limits + * + * The AG headers are sector sized, so the amount of space they take up is + * dependent on filesystem geometry. The others are all single blocks. + */ +#define XFS_ALLOC_AG_MAX_USABLE(mp) \ + ((mp)->m_sb.sb_agblocks - XFS_BB_TO_FSB(mp, XFS_FSS_TO_BB(mp, 4)) - 7) + + /* * Argument structure for xfs_alloc routines. * This is turned into a structure to avoid having 20 arguments passed diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c index 4111cd3966c..f3a3768189b 100644 --- a/fs/xfs/xfs_bmap.c +++ b/fs/xfs/xfs_bmap.c @@ -2430,7 +2430,7 @@ xfs_bmap_btalloc_nullfb( startag = ag = 0; pag = xfs_perag_get(mp, ag); - while (*blen < ap->alen) { + while (*blen < args->maxlen) { if (!pag->pagf_init) { error = xfs_alloc_pagf_init(mp, args->tp, ag, XFS_ALLOC_FLAG_TRYLOCK); @@ -2452,7 +2452,7 @@ xfs_bmap_btalloc_nullfb( notinit = 1; if (xfs_inode_is_filestream(ap->ip)) { - if (*blen >= ap->alen) + if (*blen >= args->maxlen) break; if (ap->userdata) { @@ -2498,14 +2498,14 @@ xfs_bmap_btalloc_nullfb( * If the best seen length is less than the request * length, use the best as the minimum. */ - else if (*blen < ap->alen) + else if (*blen < args->maxlen) args->minlen = *blen; /* - * Otherwise we've seen an extent as big as alen, + * Otherwise we've seen an extent as big as maxlen, * use that as the minimum. */ else - args->minlen = ap->alen; + args->minlen = args->maxlen; /* * set the failure fallback case to look in the selected @@ -2573,7 +2573,9 @@ xfs_bmap_btalloc( args.tp = ap->tp; args.mp = mp; args.fsbno = ap->rval; - args.maxlen = MIN(ap->alen, mp->m_sb.sb_agblocks); + + /* Trim the allocation back to the maximum an AG can fit. */ + args.maxlen = MIN(ap->alen, XFS_ALLOC_AG_MAX_USABLE(mp)); args.firstblock = ap->firstblock; blen = 0; if (nullfb) { @@ -2621,7 +2623,7 @@ xfs_bmap_btalloc( /* * Adjust for alignment */ - if (blen > args.alignment && blen <= ap->alen) + if (blen > args.alignment && blen <= args.maxlen) args.minlen = blen - args.alignment; args.minalignslop = 0; } else { @@ -2640,7 +2642,7 @@ xfs_bmap_btalloc( * of minlen+alignment+slop doesn't go up * between the calls. */ - if (blen > mp->m_dalign && blen <= ap->alen) + if (blen > mp->m_dalign && blen <= args.maxlen) nextminlen = blen - mp->m_dalign; else nextminlen = args.minlen; -- cgit v1.2.3-18-g5258 From 4ce159890c00e2cc705e955a939bf1dca7b07ab8 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Thu, 27 Jan 2011 12:17:58 +1100 Subject: xfs: prevent extsize alignment from exceeding maximum extent size When doing delayed allocation, if the allocation size is for a maximally sized extent, extent size alignment can push it over this limit. This results in an assert failure in xfs_bmbt_set_allf() as the extent length is too large to find in the extent record. Fix this by ensuring that we allow for space that extent size alignment requires (up to 2 * (extsize -1) blocks as we have to handle both head and tail alignment) when limiting the maximum size of the extent. Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig Reviewed-by: Alex Elder --- fs/xfs/xfs_bmap.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c index f3a3768189b..3e9c278a8f7 100644 --- a/fs/xfs/xfs_bmap.c +++ b/fs/xfs/xfs_bmap.c @@ -4487,6 +4487,16 @@ xfs_bmapi( /* Figure out the extent size, adjust alen */ extsz = xfs_get_extsz_hint(ip); if (extsz) { + /* + * make sure we don't exceed a single + * extent length when we align the + * extent by reducing length we are + * going to allocate by the maximum + * amount extent size aligment may + * require. + */ + alen = XFS_FILBLKS_MIN(len, + MAXEXTLEN - (2 * extsz - 1)); error = xfs_bmap_extsize_align(mp, &got, &prev, extsz, rt, eof, -- cgit v1.2.3-18-g5258 From 5315837daee7ed76c31ef643915f7d76ef8c1aa3 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Thu, 27 Jan 2011 12:18:18 +1100 Subject: xfs: limit extsize to size of AGs and/or MAXEXTLEN MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The extent size hint can be set to larger than an AG. This means that the alignment process can push the range to be allocated outside the bounds of the AG, resulting in assert failures or corrupted bmbt records. Similarly, if the extsize is larger than the maximum extent size supported, the alignment process will produce extents that are too large to fit into the bmbt records, resulting in a different type of assert/corruption failure. Fix this by limiting extsize at the time іt is set firstly to be less than MAXEXTLEN, then to be a maximum of half the size of the AGs in the filesystem for non-realtime inodes. Realtime inodes do not allocate out of AGs, so don't have to be restricted by the size of AGs. Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig Reviewed-by: Alex Elder --- fs/xfs/linux-2.6/xfs_ioctl.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c index b06ede1d0be..f5e2a19e0f8 100644 --- a/fs/xfs/linux-2.6/xfs_ioctl.c +++ b/fs/xfs/linux-2.6/xfs_ioctl.c @@ -985,10 +985,22 @@ xfs_ioctl_setattr( /* * Extent size must be a multiple of the appropriate block - * size, if set at all. + * size, if set at all. It must also be smaller than the + * maximum extent size supported by the filesystem. + * + * Also, for non-realtime files, limit the extent size hint to + * half the size of the AGs in the filesystem so alignment + * doesn't result in extents larger than an AG. */ if (fa->fsx_extsize != 0) { - xfs_extlen_t size; + xfs_extlen_t size; + xfs_fsblock_t extsize_fsb; + + extsize_fsb = XFS_B_TO_FSB(mp, fa->fsx_extsize); + if (extsize_fsb > MAXEXTLEN) { + code = XFS_ERROR(EINVAL); + goto error_return; + } if (XFS_IS_REALTIME_INODE(ip) || ((mask & FSX_XFLAGS) && @@ -997,6 +1009,10 @@ xfs_ioctl_setattr( mp->m_sb.sb_blocklog; } else { size = mp->m_sb.sb_blocksize; + if (extsize_fsb > mp->m_sb.sb_agblocks / 2) { + code = XFS_ERROR(EINVAL); + goto error_return; + } } if (fa->fsx_extsize % size) { -- cgit v1.2.3-18-g5258 From c6f990d1ff8e4e53b12f4175eb7d7ea710c3ca73 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Thu, 27 Jan 2011 13:23:28 +1100 Subject: xfs: handle CIl transaction commit failures correctly Failure to commit a transaction into the CIL is not handled correctly. This currently can only happen when racing with a shutdown and requires an explicit shutdown check, so it rare and can be avoided. Remove the shutdown check and make the CIL commit a void function to indicate it will always succeed, thereby removing the incorrectly handled failure case. Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig Reviewed-by: Alex Elder --- fs/xfs/xfs_log.h | 2 +- fs/xfs/xfs_log_cil.c | 8 +------- fs/xfs/xfs_trans.c | 5 +---- 3 files changed, 3 insertions(+), 12 deletions(-) diff --git a/fs/xfs/xfs_log.h b/fs/xfs/xfs_log.h index 916eb7db14d..3bd3291ef8d 100644 --- a/fs/xfs/xfs_log.h +++ b/fs/xfs/xfs_log.h @@ -191,7 +191,7 @@ void xfs_log_ticket_put(struct xlog_ticket *ticket); xlog_tid_t xfs_log_get_trans_ident(struct xfs_trans *tp); -int xfs_log_commit_cil(struct xfs_mount *mp, struct xfs_trans *tp, +void xfs_log_commit_cil(struct xfs_mount *mp, struct xfs_trans *tp, struct xfs_log_vec *log_vector, xfs_lsn_t *commit_lsn, int flags); bool xfs_log_item_in_current_chkpt(struct xfs_log_item *lip); diff --git a/fs/xfs/xfs_log_cil.c b/fs/xfs/xfs_log_cil.c index c7eac5acbfe..9ca59be0897 100644 --- a/fs/xfs/xfs_log_cil.c +++ b/fs/xfs/xfs_log_cil.c @@ -625,7 +625,7 @@ out_abort: * background commit, returns without it held once background commits are * allowed again. */ -int +void xfs_log_commit_cil( struct xfs_mount *mp, struct xfs_trans *tp, @@ -640,11 +640,6 @@ xfs_log_commit_cil( if (flags & XFS_TRANS_RELEASE_LOG_RES) log_flags = XFS_LOG_REL_PERM_RESERV; - if (XLOG_FORCED_SHUTDOWN(log)) { - xlog_cil_free_logvec(log_vector); - return XFS_ERROR(EIO); - } - /* * do all the hard work of formatting items (including memory * allocation) outside the CIL context lock. This prevents stalling CIL @@ -704,7 +699,6 @@ xfs_log_commit_cil( */ if (push) xlog_cil_push(log, 0); - return 0; } /* diff --git a/fs/xfs/xfs_trans.c b/fs/xfs/xfs_trans.c index 29f5e542489..76922793f64 100644 --- a/fs/xfs/xfs_trans.c +++ b/fs/xfs/xfs_trans.c @@ -1755,7 +1755,6 @@ xfs_trans_commit_cil( int flags) { struct xfs_log_vec *log_vector; - int error; /* * Get each log item to allocate a vector structure for @@ -1766,9 +1765,7 @@ xfs_trans_commit_cil( if (!log_vector) return ENOMEM; - error = xfs_log_commit_cil(mp, tp, log_vector, commit_lsn, flags); - if (error) - return error; + xfs_log_commit_cil(mp, tp, log_vector, commit_lsn, flags); current_restore_flags_nested(&tp->t_pflags, PF_FSTRANS); xfs_trans_free(tp); -- cgit v1.2.3-18-g5258 From 0fbca4d1c3932c27c4794bf5c2b5fc961cf5a54f Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Fri, 28 Jan 2011 11:20:46 +1100 Subject: xfs: fix dquot shaker deadlock Commit 368e136 ("xfs: remove duplicate code from dquot reclaim") fails to unlock the dquot freelist when the number of loop restarts is exceeded in xfs_qm_dqreclaim_one(). This causes hangs in memory reclaim. Rework the loop control logic into an unwind stack that all the different cases jump into. This means there is only one set of code that processes the loop exit criteria, and simplifies the unlocking of all the items from different points in the loop. It also fixes a double increment of the restart counter from the qi_dqlist_lock case. Reported-by: Malcolm Scott Signed-off-by: Dave Chinner Reviewed-by: Alex Elder --- fs/xfs/quota/xfs_qm.c | 46 +++++++++++++++++++++------------------------- 1 file changed, 21 insertions(+), 25 deletions(-) diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/quota/xfs_qm.c index f8e854b4fde..206a2815ced 100644 --- a/fs/xfs/quota/xfs_qm.c +++ b/fs/xfs/quota/xfs_qm.c @@ -1863,12 +1863,14 @@ xfs_qm_dqreclaim_one(void) xfs_dquot_t *dqpout; xfs_dquot_t *dqp; int restarts; + int startagain; restarts = 0; dqpout = NULL; /* lockorder: hashchainlock, freelistlock, mplistlock, dqlock, dqflock */ -startagain: +again: + startagain = 0; mutex_lock(&xfs_Gqm->qm_dqfrlist_lock); list_for_each_entry(dqp, &xfs_Gqm->qm_dqfrlist, q_freelist) { @@ -1885,13 +1887,10 @@ startagain: ASSERT(! (dqp->dq_flags & XFS_DQ_INACTIVE)); trace_xfs_dqreclaim_want(dqp); - - xfs_dqunlock(dqp); - mutex_unlock(&xfs_Gqm->qm_dqfrlist_lock); - if (++restarts >= XFS_QM_RECLAIM_MAX_RESTARTS) - return NULL; XQM_STATS_INC(xqmstats.xs_qm_dqwants); - goto startagain; + restarts++; + startagain = 1; + goto dqunlock; } /* @@ -1906,23 +1905,20 @@ startagain: ASSERT(list_empty(&dqp->q_mplist)); list_del_init(&dqp->q_freelist); xfs_Gqm->qm_dqfrlist_cnt--; - xfs_dqunlock(dqp); dqpout = dqp; XQM_STATS_INC(xqmstats.xs_qm_dqinact_reclaims); - break; + goto dqunlock; } ASSERT(dqp->q_hash); ASSERT(!list_empty(&dqp->q_mplist)); /* - * Try to grab the flush lock. If this dquot is in the process of - * getting flushed to disk, we don't want to reclaim it. + * Try to grab the flush lock. If this dquot is in the process + * of getting flushed to disk, we don't want to reclaim it. */ - if (!xfs_dqflock_nowait(dqp)) { - xfs_dqunlock(dqp); - continue; - } + if (!xfs_dqflock_nowait(dqp)) + goto dqunlock; /* * We have the flush lock so we know that this is not in the @@ -1944,8 +1940,7 @@ startagain: xfs_fs_cmn_err(CE_WARN, mp, "xfs_qm_dqreclaim: dquot %p flush failed", dqp); } - xfs_dqunlock(dqp); /* dqflush unlocks dqflock */ - continue; + goto dqunlock; } /* @@ -1967,13 +1962,8 @@ startagain: */ if (!mutex_trylock(&mp->m_quotainfo->qi_dqlist_lock)) { restarts++; - mutex_unlock(&dqp->q_hash->qh_lock); - xfs_dqfunlock(dqp); - xfs_dqunlock(dqp); - mutex_unlock(&xfs_Gqm->qm_dqfrlist_lock); - if (restarts++ >= XFS_QM_RECLAIM_MAX_RESTARTS) - return NULL; - goto startagain; + startagain = 1; + goto qhunlock; } ASSERT(dqp->q_nrefs == 0); @@ -1986,14 +1976,20 @@ startagain: xfs_Gqm->qm_dqfrlist_cnt--; dqpout = dqp; mutex_unlock(&mp->m_quotainfo->qi_dqlist_lock); +qhunlock: mutex_unlock(&dqp->q_hash->qh_lock); dqfunlock: xfs_dqfunlock(dqp); +dqunlock: xfs_dqunlock(dqp); if (dqpout) break; if (restarts >= XFS_QM_RECLAIM_MAX_RESTARTS) - return NULL; + break; + if (startagain) { + mutex_unlock(&xfs_Gqm->qm_dqfrlist_lock); + goto again; + } } mutex_unlock(&xfs_Gqm->qm_dqfrlist_lock); return dqpout; -- cgit v1.2.3-18-g5258 From 24446fc66fdebbdd8baca0f44fd2a47ad77ba580 Mon Sep 17 00:00:00 2001 From: "bpm@sgi.com" Date: Wed, 19 Jan 2011 17:41:58 +0000 Subject: xfs: xfs_bmap_add_extent_delay_real should init br_startblock When filling in the middle of a previous delayed allocation in xfs_bmap_add_extent_delay_real, set br_startblock of the new delay extent to the right to nullstartblock instead of 0 before inserting the extent into the ifork (xfs_iext_insert), rather than setting br_startblock afterward. Adding the extent into the ifork with br_startblock=0 can lead to the extent being copied into the btree by xfs_bmap_extent_to_btree if we happen to convert from extents format to btree format before updating br_startblock with the correct value. The unexpected addition of this delay extent to the btree can cause subsequent XFS_WANT_CORRUPTED_GOTO filesystem shutdown in several xfs_bmap_add_extent_delay_real cases where we are converting a delay extent to real and unexpectedly find an extent already inserted. For example: 911 case BMAP_LEFT_FILLING: 912 /* 913 * Filling in the first part of a previous delayed allocation. 914 * The left neighbor is not contiguous. 915 */ 916 trace_xfs_bmap_pre_update(ip, idx, state, _THIS_IP_); 917 xfs_bmbt_set_startoff(ep, new_endoff); 918 temp = PREV.br_blockcount - new->br_blockcount; 919 xfs_bmbt_set_blockcount(ep, temp); 920 xfs_iext_insert(ip, idx, 1, new, state); 921 ip->i_df.if_lastex = idx; 922 ip->i_d.di_nextents++; 923 if (cur == NULL) 924 rval = XFS_ILOG_CORE | XFS_ILOG_DEXT; 925 else { 926 rval = XFS_ILOG_CORE; 927 if ((error = xfs_bmbt_lookup_eq(cur, new->br_startoff, 928 new->br_startblock, new->br_blockcount, 929 &i))) 930 goto done; 931 XFS_WANT_CORRUPTED_GOTO(i == 0, done); With the bogus extent in the btree we shutdown the filesystem at 931. The conversion from extents to btree format happens when the number of extents in the inode increases above ip->i_df.if_ext_max. xfs_bmap_extent_to_btree copies extents from the ifork into the btree, ignoring all delalloc extents which are denoted by br_startblock having some value of nullstartblock. SGI-PV: 1013221 Signed-off-by: Ben Myers Reviewed-by: Dave Chinner Signed-off-by: Alex Elder --- fs/xfs/xfs_bmap.c | 33 +++++++++++++++++++++++++-------- 1 file changed, 25 insertions(+), 8 deletions(-) diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c index 3e9c278a8f7..dc3afd7739f 100644 --- a/fs/xfs/xfs_bmap.c +++ b/fs/xfs/xfs_bmap.c @@ -1038,17 +1038,34 @@ xfs_bmap_add_extent_delay_real( * Filling in the middle part of a previous delayed allocation. * Contiguity is impossible here. * This case is avoided almost all the time. + * + * We start with a delayed allocation: + * + * +ddddddddddddddddddddddddddddddddddddddddddddddddddddddd+ + * PREV @ idx + * + * and we are allocating: + * +rrrrrrrrrrrrrrrrr+ + * new + * + * and we set it up for insertion as: + * +ddddddddddddddddddd+rrrrrrrrrrrrrrrrr+ddddddddddddddddd+ + * new + * PREV @ idx LEFT RIGHT + * inserted at idx + 1 */ temp = new->br_startoff - PREV.br_startoff; - trace_xfs_bmap_pre_update(ip, idx, 0, _THIS_IP_); - xfs_bmbt_set_blockcount(ep, temp); - r[0] = *new; - r[1].br_state = PREV.br_state; - r[1].br_startblock = 0; - r[1].br_startoff = new_endoff; temp2 = PREV.br_startoff + PREV.br_blockcount - new_endoff; - r[1].br_blockcount = temp2; - xfs_iext_insert(ip, idx + 1, 2, &r[0], state); + trace_xfs_bmap_pre_update(ip, idx, 0, _THIS_IP_); + xfs_bmbt_set_blockcount(ep, temp); /* truncate PREV */ + LEFT = *new; + RIGHT.br_state = PREV.br_state; + RIGHT.br_startblock = nullstartblock( + (int)xfs_bmap_worst_indlen(ip, temp2)); + RIGHT.br_startoff = new_endoff; + RIGHT.br_blockcount = temp2; + /* insert LEFT (r[0]) and RIGHT (r[1]) at the same time */ + xfs_iext_insert(ip, idx + 1, 2, &LEFT, state); ip->i_df.if_lastex = idx + 1; ip->i_d.di_nextents++; if (cur == NULL) -- cgit v1.2.3-18-g5258 From e00b8a24041f37e56b4b8415ce4eba1cbc238065 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 27 Jan 2011 14:55:39 -0500 Subject: NFS: Fix an NFS client lockdep issue There is no reason to be freeing the delegation cred in the rcu callback, and doing so is resulting in a lockdep complaint that rpc_credcache_lock is being called from both softirq and non-softirq contexts. Reported-by: Chuck Lever Signed-off-by: Trond Myklebust Cc: stable@kernel.org --- fs/nfs/delegation.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c index 364e4328f39..bbbc6bf5cb2 100644 --- a/fs/nfs/delegation.c +++ b/fs/nfs/delegation.c @@ -23,8 +23,6 @@ static void nfs_do_free_delegation(struct nfs_delegation *delegation) { - if (delegation->cred) - put_rpccred(delegation->cred); kfree(delegation); } @@ -37,6 +35,10 @@ static void nfs_free_delegation_callback(struct rcu_head *head) static void nfs_free_delegation(struct nfs_delegation *delegation) { + if (delegation->cred) { + put_rpccred(delegation->cred); + delegation->cred = NULL; + } call_rcu(&delegation->rcu, nfs_free_delegation_callback); } -- cgit v1.2.3-18-g5258 From c08e76d0cd4beb759a73c1835d98f5fccc126ed1 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Fri, 28 Jan 2011 12:40:55 -0500 Subject: NFS: Micro-optimize nfs4_decode_dirent() Make the decoding of NFSv4 directory entries slightly more efficient by: 1. Avoiding unnecessary byte swapping when checking XDR booleans, and 2. Not bumping "p" when its value will be immediately replaced by xdr_inline_decode() This commit makes nfs4_decode_dirent() consistent with similar logic in the other two decode_dirent() functions. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- fs/nfs/nfs4xdr.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index 2ab8e5cb8f5..009aef9e12b 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -6086,11 +6086,11 @@ int nfs4_decode_dirent(struct xdr_stream *xdr, struct nfs_entry *entry, __be32 *p = xdr_inline_decode(xdr, 4); if (unlikely(!p)) goto out_overflow; - if (!ntohl(*p++)) { + if (*p == xdr_zero) { p = xdr_inline_decode(xdr, 4); if (unlikely(!p)) goto out_overflow; - if (!ntohl(*p++)) + if (*p == xdr_zero) return -EAGAIN; entry->eof = 1; return -EBADCOOKIE; @@ -6101,7 +6101,7 @@ int nfs4_decode_dirent(struct xdr_stream *xdr, struct nfs_entry *entry, goto out_overflow; entry->prev_cookie = entry->cookie; p = xdr_decode_hyper(p, &entry->cookie); - entry->len = ntohl(*p++); + entry->len = be32_to_cpup(p); p = xdr_inline_decode(xdr, entry->len); if (unlikely(!p)) -- cgit v1.2.3-18-g5258 From d1205f87bbb8040c1408bbd9e0a720310b2b0b9b Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Fri, 28 Jan 2011 12:41:05 -0500 Subject: NFS: NFSv4 readdir loses entries On recent 2.6.38-rc kernels, connectathon basic test 6 fails on NFSv4 mounts of OpenSolaris with something like: > ./test6: readdir > ./test6: (/mnt/klimt/matisse.test) didn't read expected 'file.12' dir entry, pass 0 > ./test6: (/mnt/klimt/matisse.test) didn't read expected 'file.82' dir entry, pass 0 > ./test6: (/mnt/klimt/matisse.test) didn't read expected 'file.164' dir entry, pass 0 > ./test6: (/mnt/klimt/matisse.test) Test failed with 3 errors > basic tests failed > Tests failed, leaving /mnt/klimt mounted > [cel@matisse cthon04]$ I narrowed the problem down to nfs4_decode_dirent() reporting that the decode buffer had overflowed while decoding the entries for those missing files. verify_attr_len() assumes both it's pointer arguments reside on the same page. When these arguments point to locations on two different pages, verify_attr_len() can report false errors. This can happen now that a large NFSv4 readdir result can span pages. We have reasonably good checking in nfs4_decode_dirent() anyway, so it should be safe to simply remove the extra checking. At a guess, this was introduced by commit 6650239a, "NFS: Don't use vm_map_ram() in readdir". Cc: stable@kernel.org [2.6.37] Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- fs/nfs/nfs4xdr.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index 009aef9e12b..4e2c168b6ee 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -6132,9 +6132,6 @@ int nfs4_decode_dirent(struct xdr_stream *xdr, struct nfs_entry *entry, if (entry->fattr->valid & NFS_ATTR_FATTR_TYPE) entry->d_type = nfs_umode_to_dtype(entry->fattr->mode); - if (verify_attr_len(xdr, p, len) < 0) - goto out_overflow; - return 0; out_overflow: -- cgit v1.2.3-18-g5258 From 5b64aa72ead6f8be488d2be7af579f0d69fb7a6e Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Thu, 27 Jan 2011 18:39:37 +0530 Subject: ath9k_hw: Fix system hang when resuming from S3/S4 The bit 6 & 7 of AR_WA (0x4004) should be enabled only for the chips that are supporting L0s functionality while resuming back from S3/S4. Enabling these bits for AR9280 is causing system hang within a few S3/S4-resume cycles. Cc: stable@kernel.org Cc: Jack Lee Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9002_hw.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9002_hw.c b/drivers/net/wireless/ath/ath9k/ar9002_hw.c index f8a7771faee..f44c84ab5dc 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_hw.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_hw.c @@ -426,9 +426,8 @@ static void ar9002_hw_configpcipowersave(struct ath_hw *ah, } /* WAR for ASPM system hang */ - if (AR_SREV_9280(ah) || AR_SREV_9285(ah) || AR_SREV_9287(ah)) { + if (AR_SREV_9285(ah) || AR_SREV_9287(ah)) val |= (AR_WA_BIT6 | AR_WA_BIT7); - } if (AR_SREV_9285E_20(ah)) val |= AR_WA_BIT23; -- cgit v1.2.3-18-g5258 From c7c1806098752c1f46943d8db2c69aff07f5d4bc Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Thu, 27 Jan 2011 18:39:38 +0530 Subject: ath9k: Fix power save usage count imbalance on deinit While unloading the driver, the ps_usecount is incremented before configuring gpio registers in deinit_device. But it is failed to restore the ps_usecount after that. The problem is that the chip is forcibly moved to FULL SLEEP by radio_disable when mac80211 is reporting as idle though ps_usecount is not zero. This patch retores ps_usecount properly and ensures that the chip is always moved to full sleep only if ps usage count is zero which also helps in debugging deadbeef on multivif case. And also fixes the following warning. ath: DMA failed to stop in 10 ms AR_CR=0xdeadbeef AR_DIAG_SW=0xdeadbeef ath: Could not stop RX, we could be confusing the DMA engine when we start RX up ------------[ cut here ]------------ WARNING: at drivers/net/wireless/ath/ath9k/recv.c:536 ath_stoprecv+0xf4/0x100 [ath9k]() Cc: stable@kernel.org Cc: Paul Stewart Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/init.c | 2 ++ drivers/net/wireless/ath/ath9k/main.c | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index b3254a3484a..087a6a95edd 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -819,6 +819,8 @@ void ath9k_deinit_device(struct ath_softc *sc) wiphy_rfkill_stop_polling(sc->hw->wiphy); ath_deinit_leds(sc); + ath9k_ps_restore(sc); + for (i = 0; i < sc->num_sec_wiphy; i++) { struct ath_wiphy *aphy = sc->sec_wiphy[i]; if (aphy == NULL) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index ace9f066fa2..568f7be2ec7 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -953,8 +953,6 @@ void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw) spin_unlock_bh(&sc->sc_pcu_lock); ath9k_ps_restore(sc); - - ath9k_setpower(sc, ATH9K_PM_FULL_SLEEP); } int ath_reset(struct ath_softc *sc, bool retry_tx) -- cgit v1.2.3-18-g5258 From 6b82ce8d824bd46053e46a895876cde39d9026e4 Mon Sep 17 00:00:00 2001 From: liubo Date: Wed, 26 Jan 2011 06:21:39 +0000 Subject: btrfs: fix uncheck memory allocation in btrfs_submit_compressed_read btrfs_submit_compressed_read() is lack of memory allocation checks and corresponding error route. After this fix, if it comes to "no memory" case, errno will be returned to userland step by step, and tell users this operation cannot go on. Signed-off-by: Liu Bo Signed-off-by: Chris Mason --- fs/btrfs/compression.c | 25 +++++++++++++++++++++++-- fs/btrfs/extent_io.c | 4 ++-- 2 files changed, 25 insertions(+), 4 deletions(-) diff --git a/fs/btrfs/compression.c b/fs/btrfs/compression.c index f745287fbf2..3a932f183da 100644 --- a/fs/btrfs/compression.c +++ b/fs/btrfs/compression.c @@ -562,7 +562,7 @@ int btrfs_submit_compressed_read(struct inode *inode, struct bio *bio, u64 em_len; u64 em_start; struct extent_map *em; - int ret; + int ret = -ENOMEM; u32 *sums; tree = &BTRFS_I(inode)->io_tree; @@ -577,6 +577,9 @@ int btrfs_submit_compressed_read(struct inode *inode, struct bio *bio, compressed_len = em->block_len; cb = kmalloc(compressed_bio_size(root, compressed_len), GFP_NOFS); + if (!cb) + goto out; + atomic_set(&cb->pending_bios, 0); cb->errors = 0; cb->inode = inode; @@ -597,13 +600,18 @@ int btrfs_submit_compressed_read(struct inode *inode, struct bio *bio, nr_pages = (compressed_len + PAGE_CACHE_SIZE - 1) / PAGE_CACHE_SIZE; - cb->compressed_pages = kmalloc(sizeof(struct page *) * nr_pages, + cb->compressed_pages = kzalloc(sizeof(struct page *) * nr_pages, GFP_NOFS); + if (!cb->compressed_pages) + goto fail1; + bdev = BTRFS_I(inode)->root->fs_info->fs_devices->latest_bdev; for (page_index = 0; page_index < nr_pages; page_index++) { cb->compressed_pages[page_index] = alloc_page(GFP_NOFS | __GFP_HIGHMEM); + if (!cb->compressed_pages[page_index]) + goto fail2; } cb->nr_pages = nr_pages; @@ -614,6 +622,8 @@ int btrfs_submit_compressed_read(struct inode *inode, struct bio *bio, cb->len = uncompressed_len; comp_bio = compressed_bio_alloc(bdev, cur_disk_byte, GFP_NOFS); + if (!comp_bio) + goto fail2; comp_bio->bi_private = cb; comp_bio->bi_end_io = end_compressed_bio_read; atomic_inc(&cb->pending_bios); @@ -681,6 +691,17 @@ int btrfs_submit_compressed_read(struct inode *inode, struct bio *bio, bio_put(comp_bio); return 0; + +fail2: + for (page_index = 0; page_index < nr_pages; page_index++) + free_page((unsigned long)cb->compressed_pages[page_index]); + + kfree(cb->compressed_pages); +fail1: + kfree(cb); +out: + free_extent_map(em); + return ret; } static struct list_head comp_idle_workspace[BTRFS_COMPRESS_TYPES]; diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 8b8d3d99ae6..6411ed6ca44 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -1865,7 +1865,7 @@ static int submit_one_bio(int rw, struct bio *bio, int mirror_num, bio_get(bio); if (tree->ops && tree->ops->submit_bio_hook) - tree->ops->submit_bio_hook(page->mapping->host, rw, bio, + ret = tree->ops->submit_bio_hook(page->mapping->host, rw, bio, mirror_num, bio_flags, start); else submit_bio(rw, bio); @@ -2126,7 +2126,7 @@ int extent_read_full_page(struct extent_io_tree *tree, struct page *page, ret = __extent_read_full_page(tree, page, get_extent, &bio, 0, &bio_flags); if (bio) - submit_one_bio(READ, bio, 0, bio_flags); + ret = submit_one_bio(READ, bio, 0, bio_flags); return ret; } -- cgit v1.2.3-18-g5258 From 2a29edc6b60a5248ccab588e7ba7dad38cef0235 Mon Sep 17 00:00:00 2001 From: liubo Date: Wed, 26 Jan 2011 06:22:08 +0000 Subject: btrfs: fix several uncheck memory allocations To make btrfs more stable, add several missing necessary memory allocation checks, and when no memory, return proper errno. We've checked that some of those -ENOMEM errors will be returned to userspace, and some will be catched by BUG_ON() in the upper callers, and none will be ignored silently. Signed-off-by: Liu Bo Signed-off-by: Chris Mason --- fs/btrfs/export.c | 2 ++ fs/btrfs/file-item.c | 2 ++ fs/btrfs/file.c | 4 ++++ fs/btrfs/tree-log.c | 25 +++++++++++++++++++++++++ 4 files changed, 33 insertions(+) diff --git a/fs/btrfs/export.c b/fs/btrfs/export.c index 6f044447359..3220ad1aafc 100644 --- a/fs/btrfs/export.c +++ b/fs/btrfs/export.c @@ -176,6 +176,8 @@ static struct dentry *btrfs_get_parent(struct dentry *child) int ret; path = btrfs_alloc_path(); + if (!path) + return ERR_PTR(-ENOMEM); if (dir->i_ino == BTRFS_FIRST_FREE_OBJECTID) { key.objectid = root->root_key.objectid; diff --git a/fs/btrfs/file-item.c b/fs/btrfs/file-item.c index a562a250ae7..d0bc72657cd 100644 --- a/fs/btrfs/file-item.c +++ b/fs/btrfs/file-item.c @@ -536,6 +536,8 @@ int btrfs_del_csums(struct btrfs_trans_handle *trans, root = root->fs_info->csum_root; path = btrfs_alloc_path(); + if (!path) + return -ENOMEM; while (1) { key.objectid = BTRFS_EXTENT_CSUM_OBJECTID; diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index f903433f5bd..65b2424a411 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -945,6 +945,10 @@ static ssize_t btrfs_file_aio_write(struct kiocb *iocb, PAGE_CACHE_SIZE, PAGE_CACHE_SIZE / (sizeof(struct page *))); pages = kmalloc(nrptrs * sizeof(struct page *), GFP_KERNEL); + if (!pages) { + ret = -ENOMEM; + goto out; + } /* generic_write_checks can change our pos */ start_pos = pos; diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index 054744ac571..c25a41d8611 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -338,6 +338,12 @@ static noinline int overwrite_item(struct btrfs_trans_handle *trans, } dst_copy = kmalloc(item_size, GFP_NOFS); src_copy = kmalloc(item_size, GFP_NOFS); + if (!dst_copy || !src_copy) { + btrfs_release_path(root, path); + kfree(dst_copy); + kfree(src_copy); + return -ENOMEM; + } read_extent_buffer(eb, src_copy, src_ptr, item_size); @@ -665,6 +671,9 @@ static noinline int drop_one_dir_item(struct btrfs_trans_handle *trans, btrfs_dir_item_key_to_cpu(leaf, di, &location); name_len = btrfs_dir_name_len(leaf, di); name = kmalloc(name_len, GFP_NOFS); + if (!name) + return -ENOMEM; + read_extent_buffer(leaf, name, (unsigned long)(di + 1), name_len); btrfs_release_path(root, path); @@ -744,6 +753,9 @@ static noinline int backref_in_log(struct btrfs_root *log, int match = 0; path = btrfs_alloc_path(); + if (!path) + return -ENOMEM; + ret = btrfs_search_slot(NULL, log, key, path, 0, 0); if (ret != 0) goto out; @@ -967,6 +979,8 @@ static noinline int fixup_inode_link_count(struct btrfs_trans_handle *trans, key.offset = (u64)-1; path = btrfs_alloc_path(); + if (!path) + return -ENOMEM; while (1) { ret = btrfs_search_slot(NULL, root, &key, path, 0, 0); @@ -1178,6 +1192,9 @@ static noinline int replay_one_name(struct btrfs_trans_handle *trans, name_len = btrfs_dir_name_len(eb, di); name = kmalloc(name_len, GFP_NOFS); + if (!name) + return -ENOMEM; + log_type = btrfs_dir_type(eb, di); read_extent_buffer(eb, name, (unsigned long)(di + 1), name_len); @@ -1692,6 +1709,8 @@ static noinline int walk_down_log_tree(struct btrfs_trans_handle *trans, root_owner = btrfs_header_owner(parent); next = btrfs_find_create_tree_block(root, bytenr, blocksize); + if (!next) + return -ENOMEM; if (*level == 1) { wc->process_func(root, next, wc, ptr_gen); @@ -2194,6 +2213,9 @@ int btrfs_del_dir_entries_in_log(struct btrfs_trans_handle *trans, log = root->log_root; path = btrfs_alloc_path(); + if (!path) + return -ENOMEM; + di = btrfs_lookup_dir_item(trans, log, path, dir->i_ino, name, name_len, -1); if (IS_ERR(di)) { @@ -2594,6 +2616,9 @@ static noinline int copy_items(struct btrfs_trans_handle *trans, ins_data = kmalloc(nr * sizeof(struct btrfs_key) + nr * sizeof(u32), GFP_NOFS); + if (!ins_data) + return -ENOMEM; + ins_sizes = (u32 *)ins_data; ins_keys = (struct btrfs_key *)(ins_data + nr * sizeof(u32)); -- cgit v1.2.3-18-g5258 From 333e8105445d4f51101fc3d23199a919d66730b3 Mon Sep 17 00:00:00 2001 From: liubo Date: Wed, 26 Jan 2011 06:22:33 +0000 Subject: btrfs: fix missing break in switch phrase There is a missing break in switch, fix it. Signed-off-by: Liu Bo Signed-off-by: Chris Mason --- fs/btrfs/print-tree.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/btrfs/print-tree.c b/fs/btrfs/print-tree.c index 0d126be22b6..fb2605d998e 100644 --- a/fs/btrfs/print-tree.c +++ b/fs/btrfs/print-tree.c @@ -260,6 +260,7 @@ void btrfs_print_leaf(struct btrfs_root *root, struct extent_buffer *l) #else BUG(); #endif + break; case BTRFS_BLOCK_GROUP_ITEM_KEY: bi = btrfs_item_ptr(l, i, struct btrfs_block_group_item); -- cgit v1.2.3-18-g5258 From 34d19bada00f4825588b338a8ee193820f9ceeb0 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 24 Jan 2011 19:55:19 +0000 Subject: fs/btrfs/inode.c: Add missing IS_ERR test After the conditional that precedes the following code, inode may be an ERR_PTR value. This can eg result from a memory allocation failure via the call to btrfs_iget, and thus does not imply that root is different than sub_root. Thus, an IS_ERR check is added to ensure that there is no dereference of inode in this case. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @r@ identifier f; @@ f(...) { ... return ERR_PTR(...); } @@ identifier r.f, fld; expression x; statement S1,S2; @@ x = f(...) ... when != IS_ERR(x) ( if (IS_ERR(x) ||...) S1 else S2 | *x->fld ) // Signed-off-by: Julia Lawall Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 2c9a2f7d563..2b7d251d6ad 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -4137,7 +4137,7 @@ struct inode *btrfs_lookup_dentry(struct inode *dir, struct dentry *dentry) } srcu_read_unlock(&root->fs_info->subvol_srcu, index); - if (root != sub_root) { + if (!IS_ERR(inode) && root != sub_root) { down_read(&root->fs_info->cleanup_work_sem); if (!(inode->i_sb->s_flags & MS_RDONLY)) btrfs_orphan_cleanup(sub_root); -- cgit v1.2.3-18-g5258 From 3612b49598c303cfb22a4b609427f829828e2427 Mon Sep 17 00:00:00 2001 From: Tsutomu Itoh Date: Tue, 25 Jan 2011 02:51:38 +0000 Subject: btrfs: fix return value check of btrfs_join_transaction() The error check of btrfs_join_transaction()/btrfs_join_transaction_nolock() is added, and the mistake of the error check in several places is corrected. For more stable Btrfs, I think that we should reduce BUG_ON(). But, I think that long time is necessary for this. So, I propose this patch as a short-term solution. With this patch: - To more stable Btrfs, the part that should be corrected is clarified. - The panic isn't done by the NULL pointer reference etc. (even if BUG_ON() is increased temporarily) - The error code is returned in the place where the error can be easily returned. As a long-term plan: - BUG_ON() is reduced by using the forced-readonly framework, etc. Signed-off-by: Tsutomu Itoh Signed-off-by: Chris Mason --- fs/btrfs/disk-io.c | 5 +++++ fs/btrfs/extent-tree.c | 2 +- fs/btrfs/inode.c | 24 ++++++++++++++++-------- fs/btrfs/ioctl.c | 2 +- fs/btrfs/relocation.c | 26 +++++++++++++++++++++++--- fs/btrfs/transaction.c | 5 +++++ 6 files changed, 51 insertions(+), 13 deletions(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 2887b8be6fd..b36eeef1919 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1550,6 +1550,7 @@ static int transaction_kthread(void *arg) spin_unlock(&root->fs_info->new_trans_lock); trans = btrfs_join_transaction(root, 1); + BUG_ON(IS_ERR(trans)); if (transid == trans->transid) { ret = btrfs_commit_transaction(trans, root); BUG_ON(ret); @@ -2464,10 +2465,14 @@ int btrfs_commit_super(struct btrfs_root *root) up_write(&root->fs_info->cleanup_work_sem); trans = btrfs_join_transaction(root, 1); + if (IS_ERR(trans)) + return PTR_ERR(trans); ret = btrfs_commit_transaction(trans, root); BUG_ON(ret); /* run commit again to drop the original snapshot */ trans = btrfs_join_transaction(root, 1); + if (IS_ERR(trans)) + return PTR_ERR(trans); btrfs_commit_transaction(trans, root); ret = btrfs_write_and_wait_transaction(NULL, root); BUG_ON(ret); diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index bcf303204f7..98ee139885c 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -7478,7 +7478,7 @@ int btrfs_drop_dead_reloc_roots(struct btrfs_root *root) BUG_ON(reloc_root->commit_root != NULL); while (1) { trans = btrfs_join_transaction(root, 1); - BUG_ON(!trans); + BUG_ON(IS_ERR(trans)); mutex_lock(&root->fs_info->drop_mutex); ret = btrfs_drop_snapshot(trans, reloc_root); diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 2b7d251d6ad..40fee137dd1 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -416,7 +416,7 @@ again: } if (start == 0) { trans = btrfs_join_transaction(root, 1); - BUG_ON(!trans); + BUG_ON(IS_ERR(trans)); btrfs_set_trans_block_group(trans, inode); trans->block_rsv = &root->fs_info->delalloc_block_rsv; @@ -612,6 +612,7 @@ retry: GFP_NOFS); trans = btrfs_join_transaction(root, 1); + BUG_ON(IS_ERR(trans)); ret = btrfs_reserve_extent(trans, root, async_extent->compressed_size, async_extent->compressed_size, @@ -771,7 +772,7 @@ static noinline int cow_file_range(struct inode *inode, BUG_ON(root == root->fs_info->tree_root); trans = btrfs_join_transaction(root, 1); - BUG_ON(!trans); + BUG_ON(IS_ERR(trans)); btrfs_set_trans_block_group(trans, inode); trans->block_rsv = &root->fs_info->delalloc_block_rsv; @@ -1049,7 +1050,7 @@ static noinline int run_delalloc_nocow(struct inode *inode, } else { trans = btrfs_join_transaction(root, 1); } - BUG_ON(!trans); + BUG_ON(IS_ERR(trans)); cow_start = (u64)-1; cur_offset = start; @@ -1704,7 +1705,7 @@ static int btrfs_finish_ordered_io(struct inode *inode, u64 start, u64 end) trans = btrfs_join_transaction_nolock(root, 1); else trans = btrfs_join_transaction(root, 1); - BUG_ON(!trans); + BUG_ON(IS_ERR(trans)); btrfs_set_trans_block_group(trans, inode); trans->block_rsv = &root->fs_info->delalloc_block_rsv; ret = btrfs_update_inode(trans, root, inode); @@ -1721,6 +1722,7 @@ static int btrfs_finish_ordered_io(struct inode *inode, u64 start, u64 end) trans = btrfs_join_transaction_nolock(root, 1); else trans = btrfs_join_transaction(root, 1); + BUG_ON(IS_ERR(trans)); btrfs_set_trans_block_group(trans, inode); trans->block_rsv = &root->fs_info->delalloc_block_rsv; @@ -2382,6 +2384,7 @@ void btrfs_orphan_cleanup(struct btrfs_root *root) if (root->orphan_block_rsv || root->orphan_item_inserted) { trans = btrfs_join_transaction(root, 1); + BUG_ON(IS_ERR(trans)); btrfs_end_transaction(trans, root); } @@ -4350,6 +4353,8 @@ int btrfs_write_inode(struct inode *inode, struct writeback_control *wbc) trans = btrfs_join_transaction_nolock(root, 1); else trans = btrfs_join_transaction(root, 1); + if (IS_ERR(trans)) + return PTR_ERR(trans); btrfs_set_trans_block_group(trans, inode); if (nolock) ret = btrfs_end_transaction_nolock(trans, root); @@ -4375,6 +4380,7 @@ void btrfs_dirty_inode(struct inode *inode) return; trans = btrfs_join_transaction(root, 1); + BUG_ON(IS_ERR(trans)); btrfs_set_trans_block_group(trans, inode); ret = btrfs_update_inode(trans, root, inode); @@ -5179,6 +5185,8 @@ again: em = NULL; btrfs_release_path(root, path); trans = btrfs_join_transaction(root, 1); + if (IS_ERR(trans)) + return ERR_CAST(trans); goto again; } map = kmap(page); @@ -5283,8 +5291,8 @@ static struct extent_map *btrfs_new_extent_direct(struct inode *inode, btrfs_drop_extent_cache(inode, start, start + len - 1, 0); trans = btrfs_join_transaction(root, 0); - if (!trans) - return ERR_PTR(-ENOMEM); + if (IS_ERR(trans)) + return ERR_CAST(trans); trans->block_rsv = &root->fs_info->delalloc_block_rsv; @@ -5508,7 +5516,7 @@ static int btrfs_get_blocks_direct(struct inode *inode, sector_t iblock, * while we look for nocow cross refs */ trans = btrfs_join_transaction(root, 0); - if (!trans) + if (IS_ERR(trans)) goto must_cow; if (can_nocow_odirect(trans, inode, start, len) == 1) { @@ -5643,7 +5651,7 @@ again: BUG_ON(!ordered); trans = btrfs_join_transaction(root, 1); - if (!trans) { + if (IS_ERR(trans)) { err = -ENOMEM; goto out; } diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index edd82becbb9..04b4fb9144a 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -203,7 +203,7 @@ static int btrfs_ioctl_setflags(struct file *file, void __user *arg) trans = btrfs_join_transaction(root, 1); - BUG_ON(!trans); + BUG_ON(IS_ERR(trans)); ret = btrfs_update_inode(trans, root, inode); BUG_ON(ret); diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index 045c9c2b2d7..ea996543024 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -2147,6 +2147,12 @@ again: } trans = btrfs_join_transaction(rc->extent_root, 1); + if (IS_ERR(trans)) { + if (!err) + btrfs_block_rsv_release(rc->extent_root, + rc->block_rsv, num_bytes); + return PTR_ERR(trans); + } if (!err) { if (num_bytes != rc->merging_rsv_size) { @@ -3222,6 +3228,7 @@ truncate: trans = btrfs_join_transaction(root, 0); if (IS_ERR(trans)) { btrfs_free_path(path); + ret = PTR_ERR(trans); goto out; } @@ -3628,6 +3635,7 @@ int prepare_to_relocate(struct reloc_control *rc) set_reloc_control(rc); trans = btrfs_join_transaction(rc->extent_root, 1); + BUG_ON(IS_ERR(trans)); btrfs_commit_transaction(trans, rc->extent_root); return 0; } @@ -3804,7 +3812,10 @@ static noinline_for_stack int relocate_block_group(struct reloc_control *rc) /* get rid of pinned extents */ trans = btrfs_join_transaction(rc->extent_root, 1); - btrfs_commit_transaction(trans, rc->extent_root); + if (IS_ERR(trans)) + err = PTR_ERR(trans); + else + btrfs_commit_transaction(trans, rc->extent_root); out_free: btrfs_free_block_rsv(rc->extent_root, rc->block_rsv); btrfs_free_path(path); @@ -4125,6 +4136,11 @@ int btrfs_recover_relocation(struct btrfs_root *root) set_reloc_control(rc); trans = btrfs_join_transaction(rc->extent_root, 1); + if (IS_ERR(trans)) { + unset_reloc_control(rc); + err = PTR_ERR(trans); + goto out_free; + } rc->merge_reloc_tree = 1; @@ -4154,9 +4170,13 @@ int btrfs_recover_relocation(struct btrfs_root *root) unset_reloc_control(rc); trans = btrfs_join_transaction(rc->extent_root, 1); - btrfs_commit_transaction(trans, rc->extent_root); -out: + if (IS_ERR(trans)) + err = PTR_ERR(trans); + else + btrfs_commit_transaction(trans, rc->extent_root); +out_free: kfree(rc); +out: while (!list_empty(&reloc_roots)) { reloc_root = list_entry(reloc_roots.next, struct btrfs_root, root_list); diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index bae5c7b8bbe..3d73c8d93bb 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -1161,6 +1161,11 @@ int btrfs_commit_transaction_async(struct btrfs_trans_handle *trans, INIT_DELAYED_WORK(&ac->work, do_async_commit); ac->root = root; ac->newtrans = btrfs_join_transaction(root, 0); + if (IS_ERR(ac->newtrans)) { + int err = PTR_ERR(ac->newtrans); + kfree(ac); + return err; + } /* take transaction reference */ mutex_lock(&root->fs_info->trans_mutex); -- cgit v1.2.3-18-g5258 From abd30bb0af9d4671506502278e8631bed9e3c35c Mon Sep 17 00:00:00 2001 From: Tsutomu Itoh Date: Mon, 24 Jan 2011 00:57:10 +0000 Subject: btrfs: check return value of btrfs_start_ioctl_transaction() properly btrfs_start_ioctl_transaction() returns ERR_PTR(), not NULL. So, it is necessary to use IS_ERR() to check the return value. Signed-off-by: Tsutomu Itoh Signed-off-by: Chris Mason --- fs/btrfs/ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 04b4fb9144a..12dabe28cf5 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -2085,7 +2085,7 @@ static long btrfs_ioctl_trans_start(struct file *file) ret = -ENOMEM; trans = btrfs_start_ioctl_transaction(root, 0); - if (!trans) + if (IS_ERR(trans)) goto out_drop; file->private_data = trans; -- cgit v1.2.3-18-g5258 From dedefd7215d3ec451291ca393e5c8e4c1882c8c6 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Mon, 24 Jan 2011 21:43:18 +0000 Subject: Btrfs: fix check_path_shared so it returns the right value When running xfstests 224 I kept getting ENOSPC when trying to remove the files, and this is because we were returning ret from check_path_shared while it was uninitalized, which isn't right. Fix this to return 0 properly, and now xfstests 224 doesn't freak out when it tries to clean itself up. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 40fee137dd1..5621818921f 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -2718,9 +2718,10 @@ static int check_path_shared(struct btrfs_root *root, struct extent_buffer *eb; int level; u64 refs = 1; - int uninitialized_var(ret); for (level = 0; level < BTRFS_MAX_LEVEL; level++) { + int ret; + if (!path->nodes[level]) break; eb = path->nodes[level]; @@ -2731,7 +2732,7 @@ static int check_path_shared(struct btrfs_root *root, if (refs > 1) return 1; } - return ret; /* XXX callers? */ + return 0; } /* -- cgit v1.2.3-18-g5258 From e9e22899de661af94cb9995885fd04e4c738838b Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Mon, 24 Jan 2011 21:43:19 +0000 Subject: Btrfs: do not release more reserved bytes to the global_block_rsv than we need When we do btrfs_block_rsv_release, if global_block_rsv is not full we will release all the extra bytes to global_block_rsv, even if it's only a little short of the amount of space that we need to reserve. This causes us to starve ourselves of reservable space during the transaction which will force us to shrink delalloc bytes and commit the transaction more often than we should. So instead just add the amount of bytes we need to add to the global reserve so reserved == size, and then add the rest back into the space_info for general use. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 98ee139885c..7af618dcf2c 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -3589,8 +3589,20 @@ void block_rsv_release_bytes(struct btrfs_block_rsv *block_rsv, if (num_bytes > 0) { if (dest) { - block_rsv_add_bytes(dest, num_bytes, 0); - } else { + spin_lock(&dest->lock); + if (!dest->full) { + u64 bytes_to_add; + + bytes_to_add = dest->size - dest->reserved; + bytes_to_add = min(num_bytes, bytes_to_add); + dest->reserved += bytes_to_add; + if (dest->reserved >= dest->size) + dest->full = 1; + num_bytes -= bytes_to_add; + } + spin_unlock(&dest->lock); + } + if (num_bytes) { spin_lock(&space_info->lock); space_info->bytes_reserved -= num_bytes; spin_unlock(&space_info->lock); -- cgit v1.2.3-18-g5258 From 68a82277b8619e6d0f2738b1d9b160b627e81e92 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Mon, 24 Jan 2011 21:43:20 +0000 Subject: Btrfs: use the global block reserve if we cannot reserve space We call use_block_rsv right before we make an allocation in order to make sure we have enough space. Now normally people have called btrfs_start_transaction() with the appropriate amount of space that we need, so we just use some of that pre-reserved space and move along happily. The problem is where people use btrfs_join_transaction(), which doesn't actually reserve any space. So we try and reserve space here, but we cannot flush delalloc, so this forces us to return -ENOSPC when in reality we have plenty of space. The most common symptom is seeing a bunch of "couldn't dirty inode" messages in syslog. With xfstests 224 we end up falling back to start_transaction and then doing all the flush delalloc stuff which causes to hang for a very long time. So instead steal from the global reserve, which is what this is meant for anyway. With this patch and the other 2 I have sent xfstests 224 now passes successfully. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 28 +++++++++++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 7af618dcf2c..ff6bbfd75cf 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -5646,6 +5646,7 @@ use_block_rsv(struct btrfs_trans_handle *trans, struct btrfs_root *root, u32 blocksize) { struct btrfs_block_rsv *block_rsv; + struct btrfs_block_rsv *global_rsv = &root->fs_info->global_block_rsv; int ret; block_rsv = get_block_rsv(trans, root); @@ -5653,14 +5654,39 @@ use_block_rsv(struct btrfs_trans_handle *trans, if (block_rsv->size == 0) { ret = reserve_metadata_bytes(trans, root, block_rsv, blocksize, 0); - if (ret) + /* + * If we couldn't reserve metadata bytes try and use some from + * the global reserve. + */ + if (ret && block_rsv != global_rsv) { + ret = block_rsv_use_bytes(global_rsv, blocksize); + if (!ret) + return global_rsv; + return ERR_PTR(ret); + } else if (ret) { return ERR_PTR(ret); + } return block_rsv; } ret = block_rsv_use_bytes(block_rsv, blocksize); if (!ret) return block_rsv; + if (ret) { + WARN_ON(1); + ret = reserve_metadata_bytes(trans, root, block_rsv, blocksize, + 0); + if (!ret) { + spin_lock(&block_rsv->lock); + block_rsv->size += blocksize; + spin_unlock(&block_rsv->lock); + return block_rsv; + } else if (ret && block_rsv != global_rsv) { + ret = block_rsv_use_bytes(global_rsv, blocksize); + if (!ret) + return global_rsv; + } + } return ERR_PTR(-ENOSPC); } -- cgit v1.2.3-18-g5258 From ad0397a7a97f55fd7f70998ec208c5d8b90310ff Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 28 Jan 2011 18:44:44 +0000 Subject: Btrfs: do error checking in btrfs_del_csums Got a report of a box panicing because we got a NULL eb in read_extent_buffer. His fs was borked and btrfs_search_path returned EIO, but we don't check for errors so the box paniced. Yes I know this will just make something higher up the stack panic, but that's a problem for future Josef. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/file-item.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/btrfs/file-item.c b/fs/btrfs/file-item.c index d0bc72657cd..4f19a3e1bf3 100644 --- a/fs/btrfs/file-item.c +++ b/fs/btrfs/file-item.c @@ -550,7 +550,10 @@ int btrfs_del_csums(struct btrfs_trans_handle *trans, if (path->slots[0] == 0) goto out; path->slots[0]--; + } else if (ret < 0) { + goto out; } + leaf = path->nodes[0]; btrfs_item_key_to_cpu(leaf, &key, path->slots[0]); -- cgit v1.2.3-18-g5258 From 7adf5dfbb3af65a00e20b3ead224c3a1b40e4ec4 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 25 Jan 2011 22:11:54 +0000 Subject: Btrfs: handle no memory properly in prepare_pages Instead of doing a BUG_ON(1) in prepare_pages if grab_cache_page() fails, just loop through the pages we've already grabbed and unlock and release them, then return -ENOMEM like we should. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/file.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 65b2424a411..9e097fbfc78 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -792,8 +792,12 @@ again: for (i = 0; i < num_pages; i++) { pages[i] = grab_cache_page(inode->i_mapping, index + i); if (!pages[i]) { - err = -ENOMEM; - BUG_ON(1); + int c; + for (c = i - 1; c >= 0; c--) { + unlock_page(pages[c]); + page_cache_release(pages[c]); + } + return -ENOMEM; } wait_on_page_writeback(pages[i]); } -- cgit v1.2.3-18-g5258 From 31dd272e8cbb32ef31a411492cc642c363bb54b9 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Tue, 7 Dec 2010 14:23:45 +0000 Subject: mlx4_core: Add ConnectX-3 device IDs ...as already added to pci.ids. Signed-off-by: Yevgeny Petrilin Signed-off-by: Roland Dreier --- drivers/net/mlx4/main.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c index 4ffdc18fcb8..2765a3ce9c2 100644 --- a/drivers/net/mlx4/main.c +++ b/drivers/net/mlx4/main.c @@ -1286,6 +1286,21 @@ static DEFINE_PCI_DEVICE_TABLE(mlx4_pci_table) = { { PCI_VDEVICE(MELLANOX, 0x6764) }, /* MT26468 ConnectX EN 10GigE PCIe gen2*/ { PCI_VDEVICE(MELLANOX, 0x6746) }, /* MT26438 ConnectX EN 40GigE PCIe gen2 5GT/s */ { PCI_VDEVICE(MELLANOX, 0x676e) }, /* MT26478 ConnectX2 40GigE PCIe gen2 */ + { PCI_VDEVICE(MELLANOX, 0x1002) }, /* MT25400 Family [ConnectX-2 Virtual Function] */ + { PCI_VDEVICE(MELLANOX, 0x1003) }, /* MT27500 Family [ConnectX-3] */ + { PCI_VDEVICE(MELLANOX, 0x1004) }, /* MT27500 Family [ConnectX-3 Virtual Function] */ + { PCI_VDEVICE(MELLANOX, 0x1005) }, /* MT27510 Family */ + { PCI_VDEVICE(MELLANOX, 0x1006) }, /* MT27511 Family */ + { PCI_VDEVICE(MELLANOX, 0x1007) }, /* MT27520 Family */ + { PCI_VDEVICE(MELLANOX, 0x1008) }, /* MT27521 Family */ + { PCI_VDEVICE(MELLANOX, 0x1009) }, /* MT27530 Family */ + { PCI_VDEVICE(MELLANOX, 0x100a) }, /* MT27531 Family */ + { PCI_VDEVICE(MELLANOX, 0x100b) }, /* MT27540 Family */ + { PCI_VDEVICE(MELLANOX, 0x100c) }, /* MT27541 Family */ + { PCI_VDEVICE(MELLANOX, 0x100d) }, /* MT27550 Family */ + { PCI_VDEVICE(MELLANOX, 0x100e) }, /* MT27551 Family */ + { PCI_VDEVICE(MELLANOX, 0x100f) }, /* MT27560 Family */ + { PCI_VDEVICE(MELLANOX, 0x1010) }, /* MT27561 Family */ { 0, } }; -- cgit v1.2.3-18-g5258 From d70585f7de4b4c3725062b7ce7d492f4903e4833 Mon Sep 17 00:00:00 2001 From: Mitko Haralanov Date: Fri, 21 Jan 2011 13:45:17 +0000 Subject: IB/qib: Hold link for TX SERDES settings Hold the IB link at DISABLED until we get the correct TX settings on mezz boards. Signed-off-by: Mike Marciniszyn Signed-off-by: Roland Dreier --- drivers/infiniband/hw/qib/qib_iba7322.c | 30 +++++++++++------------------- 1 file changed, 11 insertions(+), 19 deletions(-) diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c index 50cceb3ab88..b01809a82cb 100644 --- a/drivers/infiniband/hw/qib/qib_iba7322.c +++ b/drivers/infiniband/hw/qib/qib_iba7322.c @@ -623,7 +623,6 @@ struct qib_chippport_specific { u8 ibmalfusesnap; struct qib_qsfp_data qsfp_data; char epmsgbuf[192]; /* for port error interrupt msg buffer */ - u8 bounced; }; static struct { @@ -1881,23 +1880,7 @@ static noinline void handle_7322_p_errors(struct qib_pportdata *ppd) IB_PHYSPORTSTATE_DISABLED) qib_set_ib_7322_lstate(ppd, 0, QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); - else { - u32 lstate; - /* - * We need the current logical link state before - * lflags are set in handle_e_ibstatuschanged. - */ - lstate = qib_7322_iblink_state(ibcs); - - if (IS_QMH(dd) && !ppd->cpspec->bounced && - ltstate == IB_PHYSPORTSTATE_LINKUP && - (lstate >= IB_PORT_INIT && - lstate <= IB_PORT_ACTIVE)) { - ppd->cpspec->bounced = 1; - qib_7322_set_ib_cfg(ppd, QIB_IB_CFG_LSTATE, - IB_LINKCMD_DOWN | IB_LINKINITCMD_POLL); - } - + else /* * Since going into a recovery state causes the link * state to go down and since recovery is transitory, @@ -1911,7 +1894,6 @@ static noinline void handle_7322_p_errors(struct qib_pportdata *ppd) ltstate != IB_PHYSPORTSTATE_RECOVERY_WAITRMT && ltstate != IB_PHYSPORTSTATE_RECOVERY_IDLE) qib_handle_e_ibstatuschanged(ppd, ibcs); - } } if (*msg && iserr) qib_dev_porterr(dd, ppd->port, "%s error\n", msg); @@ -2381,6 +2363,11 @@ static int qib_7322_bringup_serdes(struct qib_pportdata *ppd) qib_write_kreg_port(ppd, krp_rcvctrl, ppd->p_rcvctrl); spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); + /* Hold the link state machine for mezz boards */ + if (IS_QMH(dd) || IS_QME(dd)) + qib_set_ib_7322_lstate(ppd, 0, + QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); + /* Also enable IBSTATUSCHG interrupt. */ val = qib_read_kreg_port(ppd, krp_errmask); qib_write_kreg_port(ppd, krp_errmask, @@ -5702,6 +5689,11 @@ static void set_no_qsfp_atten(struct qib_devdata *dd, int change) ppd->cpspec->h1_val = h1; /* now change the IBC and serdes, overriding generic */ init_txdds_table(ppd, 1); + /* Re-enable the physical state machine on mezz boards + * now that the correct settings have been set. */ + if (IS_QMH(dd) || IS_QME(dd)) + qib_set_ib_7322_lstate(ppd, 0, + QLOGIC_IB_IBCC_LINKINITCMD_SLEEP); any++; } if (*nxt == '\n') -- cgit v1.2.3-18-g5258 From 6a09a9d6946dd516d243d072bee83fae3c683471 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Fri, 21 Jan 2011 17:00:29 +0000 Subject: RDMA/cxgb4: Limit MAXBURST EQ context field to 256B MAXBURST cannot exceed 256B for on-chip queues. With a 512B MAXBURST, we can lock up the chip. Signed-off-by: Steve Wise Cc: Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb4/qp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c index 20800900ef3..4f0be25cab1 100644 --- a/drivers/infiniband/hw/cxgb4/qp.c +++ b/drivers/infiniband/hw/cxgb4/qp.c @@ -220,7 +220,7 @@ static int create_qp(struct c4iw_rdev *rdev, struct t4_wq *wq, V_FW_RI_RES_WR_DCAEN(0) | V_FW_RI_RES_WR_DCACPU(0) | V_FW_RI_RES_WR_FBMIN(2) | - V_FW_RI_RES_WR_FBMAX(3) | + V_FW_RI_RES_WR_FBMAX(2) | V_FW_RI_RES_WR_CIDXFTHRESHO(0) | V_FW_RI_RES_WR_CIDXFTHRESH(0) | V_FW_RI_RES_WR_EQSIZE(eqsize)); @@ -243,7 +243,7 @@ static int create_qp(struct c4iw_rdev *rdev, struct t4_wq *wq, V_FW_RI_RES_WR_DCAEN(0) | V_FW_RI_RES_WR_DCACPU(0) | V_FW_RI_RES_WR_FBMIN(2) | - V_FW_RI_RES_WR_FBMAX(3) | + V_FW_RI_RES_WR_FBMAX(2) | V_FW_RI_RES_WR_CIDXFTHRESHO(0) | V_FW_RI_RES_WR_CIDXFTHRESH(0) | V_FW_RI_RES_WR_EQSIZE(eqsize)); -- cgit v1.2.3-18-g5258 From 94788657c94169171971968c9d4b6222c5e704aa Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Fri, 21 Jan 2011 17:00:34 +0000 Subject: RDMA/cxgb4: Set the correct device physical function for iWARP connections The PF passed to FW was 0, causing PCI failures in an SR-IOV environment. Signed-off-by: Steve Wise Cc: Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb4/cm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index 0dc62b1438b..8b00e6c46f0 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -380,7 +380,7 @@ static void send_flowc(struct c4iw_ep *ep, struct sk_buff *skb) 16)) | FW_WR_FLOWID(ep->hwtid)); flowc->mnemval[0].mnemonic = FW_FLOWC_MNEM_PFNVFN; - flowc->mnemval[0].val = cpu_to_be32(0); + flowc->mnemval[0].val = cpu_to_be32(PCI_FUNC(ep->com.dev->rdev.lldi.pdev->devfn) << 8); flowc->mnemval[1].mnemonic = FW_FLOWC_MNEM_CH; flowc->mnemval[1].val = cpu_to_be32(ep->tx_chan); flowc->mnemval[2].mnemonic = FW_FLOWC_MNEM_PORT; -- cgit v1.2.3-18-g5258 From f9a4f6dcdd3f9b6d938484c2c394f39007c14f38 Mon Sep 17 00:00:00 2001 From: Ralf Thielow Date: Sun, 23 Jan 2011 16:30:03 +0000 Subject: RDMA/amso1100: Fix compile warnings Fix compile warnings on 32-bit by using "0" instead of "(u64) NULL" to assign to "c2_vq_req->reply_msg". Signed-off-by: Ralf Thielow [ Change from "(unsigned long) NULL" to plain old "0" as suggested by Bart Van Assche . - Roland ] Signed-off-by: Roland Dreier --- drivers/infiniband/hw/amso1100/c2_vq.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/infiniband/hw/amso1100/c2_vq.c b/drivers/infiniband/hw/amso1100/c2_vq.c index 9ce7819b7b2..2ec716fb2ed 100644 --- a/drivers/infiniband/hw/amso1100/c2_vq.c +++ b/drivers/infiniband/hw/amso1100/c2_vq.c @@ -107,7 +107,7 @@ struct c2_vq_req *vq_req_alloc(struct c2_dev *c2dev) r = kmalloc(sizeof(struct c2_vq_req), GFP_KERNEL); if (r) { init_waitqueue_head(&r->wait_object); - r->reply_msg = (u64) NULL; + r->reply_msg = 0; r->event = 0; r->cm_id = NULL; r->qp = NULL; @@ -123,7 +123,7 @@ struct c2_vq_req *vq_req_alloc(struct c2_dev *c2dev) */ void vq_req_free(struct c2_dev *c2dev, struct c2_vq_req *r) { - r->reply_msg = (u64) NULL; + r->reply_msg = 0; if (atomic_dec_and_test(&r->refcnt)) { kfree(r); } @@ -151,7 +151,7 @@ void vq_req_get(struct c2_dev *c2dev, struct c2_vq_req *r) void vq_req_put(struct c2_dev *c2dev, struct c2_vq_req *r) { if (atomic_dec_and_test(&r->refcnt)) { - if (r->reply_msg != (u64) NULL) + if (r->reply_msg != 0) vq_repbuf_free(c2dev, (void *) (unsigned long) r->reply_msg); kfree(r); -- cgit v1.2.3-18-g5258 From e86f8b06f5fa884a84c22b2dcd0df37ed0a75827 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Fri, 21 Jan 2011 03:40:46 +0000 Subject: RDMA/ucma: Copy iWARP route information on queries For iWARP rdma_cm ids, the "route" information is the L2 src and next hop addresses. Signed-off-by: Steve Wise Signed-off-by: Roland Dreier --- drivers/infiniband/core/ucma.c | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c index ca12acf3837..ec1e9da1488 100644 --- a/drivers/infiniband/core/ucma.c +++ b/drivers/infiniband/core/ucma.c @@ -636,6 +636,16 @@ static void ucma_copy_iboe_route(struct rdma_ucm_query_route_resp *resp, } } +static void ucma_copy_iw_route(struct rdma_ucm_query_route_resp *resp, + struct rdma_route *route) +{ + struct rdma_dev_addr *dev_addr; + + dev_addr = &route->addr.dev_addr; + rdma_addr_get_dgid(dev_addr, (union ib_gid *) &resp->ib_route[0].dgid); + rdma_addr_get_sgid(dev_addr, (union ib_gid *) &resp->ib_route[0].sgid); +} + static ssize_t ucma_query_route(struct ucma_file *file, const char __user *inbuf, int in_len, int out_len) @@ -670,8 +680,10 @@ static ssize_t ucma_query_route(struct ucma_file *file, resp.node_guid = (__force __u64) ctx->cm_id->device->node_guid; resp.port_num = ctx->cm_id->port_num; - if (rdma_node_get_transport(ctx->cm_id->device->node_type) == RDMA_TRANSPORT_IB) { - switch (rdma_port_get_link_layer(ctx->cm_id->device, ctx->cm_id->port_num)) { + switch (rdma_node_get_transport(ctx->cm_id->device->node_type)) { + case RDMA_TRANSPORT_IB: + switch (rdma_port_get_link_layer(ctx->cm_id->device, + ctx->cm_id->port_num)) { case IB_LINK_LAYER_INFINIBAND: ucma_copy_ib_route(&resp, &ctx->cm_id->route); break; @@ -681,6 +693,12 @@ static ssize_t ucma_query_route(struct ucma_file *file, default: break; } + break; + case RDMA_TRANSPORT_IWARP: + ucma_copy_iw_route(&resp, &ctx->cm_id->route); + break; + default: + break; } out: -- cgit v1.2.3-18-g5258 From 96e61fa55e86fbd10c526567aacae5b484c4b63c Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 24 Jan 2011 11:06:54 +0000 Subject: RDMA: Update missed conversion of flush_scheduled_work() Commit f06267104dd9 ("RDMA: Update workqueue usage") introduced ib_wq and removed the use of flush_scheduled_work(); however, during the merge process one chunk was lost in ib_sa_remove_one(). Fix it. Signed-off-by: Tejun Heo Signed-off-by: Roland Dreier --- drivers/infiniband/core/sa_query.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/core/sa_query.c b/drivers/infiniband/core/sa_query.c index e38be1bcc01..fbbfa24cf57 100644 --- a/drivers/infiniband/core/sa_query.c +++ b/drivers/infiniband/core/sa_query.c @@ -1079,7 +1079,7 @@ static void ib_sa_remove_one(struct ib_device *device) ib_unregister_event_handler(&sa_dev->event_handler); - flush_scheduled_work(); + flush_workqueue(ib_wq); for (i = 0; i <= sa_dev->end_port - sa_dev->start_port; ++i) { if (rdma_port_get_link_layer(device, i + 1) == IB_LINK_LAYER_INFINIBAND) { -- cgit v1.2.3-18-g5258 From 7530c4a197f3dd63f1381c1cdf93e4d2b8429ef5 Mon Sep 17 00:00:00 2001 From: Rakesh Iyer Date: Fri, 28 Jan 2011 22:05:14 -0800 Subject: Input: tegra-kbc - fix build error Fix build error introduced by variable name change. Signed-off-by: Rakesh Iyer Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/tegra-kbc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c index 939476659ad..3d3d649be9b 100644 --- a/drivers/input/keyboard/tegra-kbc.c +++ b/drivers/input/keyboard/tegra-kbc.c @@ -355,8 +355,8 @@ static void tegra_kbc_config_pins(struct tegra_kbc *kbc) for (i = 0; i < KBC_MAX_GPIO; i++) { u32 r_shft = 5 * (i % 6); u32 c_shft = 4 * (i % 8); - u32 r_mask = 0x1f << r_shift; - u32 c_mask = 0x0f << c_shift; + u32 r_mask = 0x1f << r_shft; + u32 c_mask = 0x0f << c_shft; u32 r_offs = (i / 6) * 4 + KBC_ROW_CFG0_0; u32 c_offs = (i / 8) * 4 + KBC_COL_CFG0_0; u32 row_cfg = readl(kbc->mmio + r_offs); -- cgit v1.2.3-18-g5258 From e7acc84a27fe53b198cd98cc7deaabb5dd0f20c4 Mon Sep 17 00:00:00 2001 From: Rakesh Iyer Date: Fri, 28 Jan 2011 22:05:14 -0800 Subject: Input: tegra-kbc - fix keymap entry for LeftMeta key Correct key mapping for Left Meta key. Signed-off-by: Rakesh Iyer Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/tegra-kbc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c index 3d3d649be9b..ac471b77c18 100644 --- a/drivers/input/keyboard/tegra-kbc.c +++ b/drivers/input/keyboard/tegra-kbc.c @@ -86,7 +86,7 @@ static const u32 tegra_kbc_default_keymap[] = { KEY(0, 5, KEY_Z), KEY(0, 7, KEY_FN), - KEY(1, 7, KEY_MENU), + KEY(1, 7, KEY_LEFTMETA), KEY(2, 6, KEY_RIGHTALT), KEY(2, 7, KEY_LEFTALT), -- cgit v1.2.3-18-g5258 From baddf58963241307b29e027a9fb28dfe55939db8 Mon Sep 17 00:00:00 2001 From: Alexandre Peixoto Ferreira Date: Fri, 28 Jan 2011 22:05:14 -0800 Subject: Input: synaptics - fix reconnect logic on MT devices synaptics_set_advanced_gesture_mode() affect capabilities bits we should perform comparison after calling this function, otherwise they will never match and we will be forced to perform full reconnect. Signed-off-by: Alexandre Peixoto Ferreira Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/synaptics.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index da392c22fc6..fdf089c0c70 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -766,12 +766,6 @@ static int synaptics_reconnect(struct psmouse *psmouse) return -1; } - if (old_priv.identity != priv->identity || - old_priv.model_id != priv->model_id || - old_priv.capabilities != priv->capabilities || - old_priv.ext_cap != priv->ext_cap) - return -1; - if (synaptics_set_absolute_mode(psmouse)) { printk(KERN_ERR "Unable to initialize Synaptics hardware.\n"); return -1; @@ -782,6 +776,19 @@ static int synaptics_reconnect(struct psmouse *psmouse) return -1; } + if (old_priv.identity != priv->identity || + old_priv.model_id != priv->model_id || + old_priv.capabilities != priv->capabilities || + old_priv.ext_cap != priv->ext_cap) { + printk(KERN_ERR "Synaptics hardware appears to be different: " + "id(%ld-%ld), model(%ld-%ld), caps(%lx-%lx), ext(%lx-%lx).\n", + old_priv.identity, priv->identity, + old_priv.model_id, priv->model_id, + old_priv.capabilities, priv->capabilities, + old_priv.ext_cap, priv->ext_cap); + return -1; + } + return 0; } -- cgit v1.2.3-18-g5258 From c63fe0a41fd2374be0ebe93c053820a0eed9cefe Mon Sep 17 00:00:00 2001 From: Alexandre Peixoto Ferreira Date: Fri, 28 Jan 2011 22:05:14 -0800 Subject: Input: synaptics - retry failed resets when reconnecting On some machines, like Dell Studio XPS 16 (1640), touchpad fails to respond to the standard query after first reset but may start responding later, so let's repeat reset sequence several (3) times. Signed-off-by: Alexandre Peixoto Ferreira Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/synaptics.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index fdf089c0c70..aa186cf6c51 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -755,12 +755,21 @@ static int synaptics_reconnect(struct psmouse *psmouse) { struct synaptics_data *priv = psmouse->private; struct synaptics_data old_priv = *priv; + int retry = 0; + int error; - psmouse_reset(psmouse); + do { + psmouse_reset(psmouse); + error = synaptics_detect(psmouse, 0); + } while (error && ++retry < 3); - if (synaptics_detect(psmouse, 0)) + if (error) return -1; + if (retry > 1) + printk(KERN_DEBUG "Synaptics reconnected after %d tries\n", + retry); + if (synaptics_query_hardware(psmouse)) { printk(KERN_ERR "Unable to query Synaptics hardware.\n"); return -1; -- cgit v1.2.3-18-g5258 From 3a0592b1dd69cfc403ee7514c47b9d57d8bbd6d7 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Sat, 29 Jan 2011 18:27:13 +0200 Subject: Revert "UBI: use mtd->writebufsize to set minimal I/O unit size" This reverts commit a121f643993474548fe98144514c50dd4f3dbe76. Unfortunately, this commit breaks UBIFS backward compatibility and makes new UBIFS refuse older UBIFS-formatted media: UBIFS error: validate_sb: min. I/O unit mismatch: 8 in superblock, 64 real Thus, we have to revert this patch and work on a better solution. Reported-by: Holger Brunck Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/build.c | 28 +--------------------------- 1 file changed, 1 insertion(+), 27 deletions(-) diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index f49e49dc592..5ebe280225d 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -672,33 +672,7 @@ static int io_init(struct ubi_device *ubi) ubi->nor_flash = 1; } - /* - * Set UBI min. I/O size (@ubi->min_io_size). We use @mtd->writebufsize - * for these purposes, not @mtd->writesize. At the moment this does not - * matter for NAND, because currently @mtd->writebufsize is equivalent to - * @mtd->writesize for all NANDs. However, some CFI NOR flashes may - * have @mtd->writebufsize which is multiple of @mtd->writesize. - * - * The reason we use @mtd->writebufsize for @ubi->min_io_size is that - * UBI and UBIFS recovery algorithms rely on the fact that if there was - * an unclean power cut, then we can find offset of the last corrupted - * node, align the offset to @ubi->min_io_size, read the rest of the - * eraseblock starting from this offset, and check whether there are - * only 0xFF bytes. If yes, then we are probably dealing with a - * corruption caused by a power cut, if not, then this is probably some - * severe corruption. - * - * Thus, we have to use the maximum write unit size of the flash, which - * is @mtd->writebufsize, because @mtd->writesize is the minimum write - * size, not the maximum. - */ - if (ubi->mtd->type == MTD_NANDFLASH) - ubi_assert(ubi->mtd->writebufsize == ubi->mtd->writesize); - else if (ubi->mtd->type == MTD_NORFLASH) - ubi_assert(ubi->mtd->writebufsize % ubi->mtd->writesize == 0); - - ubi->min_io_size = ubi->mtd->writebufsize; - + ubi->min_io_size = ubi->mtd->writesize; ubi->hdrs_min_io_size = ubi->mtd->writesize >> ubi->mtd->subpage_sft; /* -- cgit v1.2.3-18-g5258 From 6866fd3b7289a283741752b73e0e09f410b7639d Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 12 Jan 2011 11:18:14 +0100 Subject: dmaengine i.MX SDMA: Fix firmware loading When loading the microcode to the SDMA engine we have to use the ram_code_start_addr found in the firmware image. The copy in the sdma engine is not initialized correctly. This is broken since: 5b28aa3 dmaengine i.MX SDMA: Allow to run without firmware Signed-off-by: Sascha Hauer Signed-off-by: Dan Williams --- drivers/dma/imx-sdma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index d5a5d4d9c19..75df8b93741 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -1135,7 +1135,7 @@ static int __init sdma_get_firmware(struct sdma_engine *sdma, /* download the RAM image for SDMA */ sdma_load_script(sdma, ram_code, header->ram_code_size, - sdma->script_addrs->ram_code_start_addr); + addr->ram_code_start_addr); clk_disable(sdma->clk); sdma_add_scripts(sdma, addr); -- cgit v1.2.3-18-g5258 From 939fd4f077269dd863cd630a3b3195a20acf7d02 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 19 Jan 2011 19:13:06 +0800 Subject: dmaengine: imx-sdma: propagate error in sdma_probe() instead of returning 0 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Shawn Guo Acked-by: Uwe Kleine-König Signed-off-by: Dan Williams --- drivers/dma/imx-sdma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index 75df8b93741..1dbaf61eea2 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -1348,7 +1348,7 @@ err_clk: err_request_region: err_irq: kfree(sdma); - return 0; + return ret; } static int __exit sdma_remove(struct platform_device *pdev) -- cgit v1.2.3-18-g5258 From d718f4ebddcb0bebdbf771a6672756b666e5c31b Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 17 Jan 2011 22:39:24 +0800 Subject: dmaengine: imx-sdma: fix inconsistent naming in sdma_assign_cookie() Variable name sdma and sdmac are consistently used as the pointer to sdma_engine and sdma_channel respectively throughout the file. The patch fixes the inconsistency seen in function sdma_assign_cookie(). Signed-off-by: Shawn Guo Signed-off-by: Dan Williams --- drivers/dma/imx-sdma.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index 1dbaf61eea2..e89fd1033df 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -770,15 +770,15 @@ static void sdma_enable_channel(struct sdma_engine *sdma, int channel) __raw_writel(1 << channel, sdma->regs + SDMA_H_START); } -static dma_cookie_t sdma_assign_cookie(struct sdma_channel *sdma) +static dma_cookie_t sdma_assign_cookie(struct sdma_channel *sdmac) { - dma_cookie_t cookie = sdma->chan.cookie; + dma_cookie_t cookie = sdmac->chan.cookie; if (++cookie < 0) cookie = 1; - sdma->chan.cookie = cookie; - sdma->desc.cookie = cookie; + sdmac->chan.cookie = cookie; + sdmac->desc.cookie = cookie; return cookie; } -- cgit v1.2.3-18-g5258 From 66c46d741e2e60f0e8b625b80edb0ab820c46d7a Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sat, 29 Jan 2011 20:44:54 -0800 Subject: gro: Reset dev pointer on reuse On older kernels the VLAN code may zero skb->dev before dropping it and causing it to be reused by GRO. Unfortunately we didn't reset skb->dev in that case which causes the next GRO user to get a bogus skb->dev pointer. This particular problem no longer happens with the current upstream kernel due to changes in VLAN processing. However, for correctness we should still reset the skb->dev pointer in the GRO reuse function in case a future user does the same thing. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/core/dev.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/core/dev.c b/net/core/dev.c index 24ea2d71e7e..93e44dbf679 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -3424,6 +3424,7 @@ static void napi_reuse_skb(struct napi_struct *napi, struct sk_buff *skb) __skb_pull(skb, skb_headlen(skb)); skb_reserve(skb, NET_IP_ALIGN - skb_headroom(skb)); skb->vlan_tci = 0; + skb->dev = napi->dev; napi->skb = skb; } -- cgit v1.2.3-18-g5258 From c128df731862e90ec9292c5d3eb264ac73b522b8 Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Sun, 30 Jan 2011 01:09:37 -0800 Subject: slcan: fix referenced website in Kconfig help text Fix the referenced project website to www.mictronics.de in the Kconfig help text for the slcan driver. Signed-off-by: Oliver Hartkopp Signed-off-by: David S. Miller --- drivers/net/can/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index 986195eaa57..5dec456fd4a 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -23,7 +23,7 @@ config CAN_SLCAN As only the sending and receiving of CAN frames is implemented, this driver should work with the (serial/USB) CAN hardware from: - www.canusb.com / www.can232.com / www.mictronic.com / www.canhack.de + www.canusb.com / www.can232.com / www.mictronics.de / www.canhack.de Userspace tools to attach the SLCAN line discipline (slcan_attach, slcand) can be found in the can-utils at the SocketCAN SVN, see -- cgit v1.2.3-18-g5258 From 52fe7c9cc1637110ba4e0e6fe5d07cc0786d62de Mon Sep 17 00:00:00 2001 From: "sjur.brandeland@stericsson.com" Date: Sat, 29 Jan 2011 13:10:37 +0000 Subject: caif: bugfix - add caif headers for userspace usage. Add caif_socket.h and if_caif.h to the kernel header files exported for use by userspace. Signed-off-by: Sjur Braendeland Signed-off-by: David S. Miller --- include/linux/Kbuild | 1 + include/linux/caif/Kbuild | 2 ++ 2 files changed, 3 insertions(+) create mode 100644 include/linux/caif/Kbuild diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 2296d8b1931..b0ada6f37dd 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -1,5 +1,6 @@ header-y += byteorder/ header-y += can/ +header-y += caif/ header-y += dvb/ header-y += hdlc/ header-y += isdn/ diff --git a/include/linux/caif/Kbuild b/include/linux/caif/Kbuild new file mode 100644 index 00000000000..a9cf250689d --- /dev/null +++ b/include/linux/caif/Kbuild @@ -0,0 +1,2 @@ +header-y += caif_socket.h +header-y += if_caif.h -- cgit v1.2.3-18-g5258 From 13ad17745c2cbd437d9e24b2d97393e0be11c439 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Sat, 29 Jan 2011 14:57:22 +0000 Subject: net: Fix ip link add netns oops Ed Swierk writes: > On 2.6.35.7 > ip link add link eth0 netns 9999 type macvlan > where 9999 is a nonexistent PID triggers an oops and causes all network functions to hang: > [10663.821898] BUG: unable to handle kernel NULL pointer dereference at 000000000000006d > [10663.821917] IP: [] __dev_alloc_name+0x9a/0x170 > [10663.821933] PGD 1d3927067 PUD 22f5c5067 PMD 0 > [10663.821944] Oops: 0000 [#1] SMP > [10663.821953] last sysfs file: /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq > [10663.821959] CPU 3 > [10663.821963] Modules linked in: macvlan ip6table_filter ip6_tables rfcomm ipt_MASQUERADE binfmt_misc iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack sco ipt_REJECT bnep l2cap xt_tcpudp iptable_filter ip_tables x_tables bridge stp vboxnetadp vboxnetflt vboxdrv kvm_intel kvm parport_pc ppdev snd_hda_codec_intelhdmi snd_hda_codec_conexant arc4 iwlagn iwlcore mac80211 snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi i915 snd_seq_midi_event snd_seq thinkpad_acpi drm_kms_helper btusb tpm_tis nvram uvcvideo snd_timer snd_seq_device bluetooth videodev v4l1_compat v4l2_compat_ioctl32 tpm drm tpm_bios snd cfg80211 psmouse serio_raw intel_ips soundcore snd_page_alloc intel_agp i2c_algo_bit video output netconsole configfs lp parport usbhid hid e1000e sdhci_pci ahci libahci sdhci led_class > [10663.822155] > [10663.822161] Pid: 6000, comm: ip Not tainted 2.6.35-23-generic #41-Ubuntu 2901CTO/2901CTO > [10663.822167] RIP: 0010:[] [] __dev_alloc_name+0x9a/0x170 > [10663.822177] RSP: 0018:ffff88014aebf7b8 EFLAGS: 00010286 > [10663.822182] RAX: 00000000fffffff4 RBX: ffff8801ad900800 RCX: 0000000000000000 > [10663.822187] RDX: ffff880000000000 RSI: 0000000000000000 RDI: ffff88014ad63000 > [10663.822191] RBP: ffff88014aebf808 R08: 0000000000000041 R09: 0000000000000041 > [10663.822196] R10: 0000000000000000 R11: dead000000200200 R12: ffff88014aebf818 > [10663.822201] R13: fffffffffffffffd R14: ffff88014aebf918 R15: ffff88014ad62000 > [10663.822207] FS: 00007f00c487f700(0000) GS:ffff880001f80000(0000) knlGS:0000000000000000 > [10663.822212] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [10663.822216] CR2: 000000000000006d CR3: 0000000231f19000 CR4: 00000000000026e0 > [10663.822221] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > [10663.822226] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > [10663.822231] Process ip (pid: 6000, threadinfo ffff88014aebe000, task ffff88014afb16e0) > [10663.822236] Stack: > [10663.822240] ffff88014aebf808 ffffffff814a2bb5 ffff88014aebf7e8 00000000a00ee8d6 > [10663.822251] <0> 0000000000000000 ffffffffa00ef940 ffff8801ad900800 ffff88014aebf818 > [10663.822265] <0> ffff88014aebf918 ffff8801ad900800 ffff88014aebf858 ffffffff8149c413 > [10663.822281] Call Trace: > [10663.822290] [] ? dev_addr_init+0x75/0xb0 > [10663.822298] [] dev_alloc_name+0x43/0x90 > [10663.822307] [] rtnl_create_link+0xbe/0x1b0 > [10663.822314] [] rtnl_newlink+0x48a/0x570 > [10663.822321] [] ? rtnl_newlink+0x1ac/0x570 > [10663.822332] [] ? native_x2apic_icr_read+0x4/0x20 > [10663.822339] [] rtnetlink_rcv_msg+0x177/0x290 > [10663.822346] [] ? rtnetlink_rcv_msg+0x0/0x290 > [10663.822354] [] netlink_rcv_skb+0xa9/0xd0 > [10663.822360] [] rtnetlink_rcv+0x25/0x40 > [10663.822367] [] netlink_unicast+0x2de/0x2f0 > [10663.822374] [] netlink_sendmsg+0x1fe/0x2e0 > [10663.822383] [] sock_sendmsg+0xf3/0x120 > [10663.822391] [] ? _raw_spin_lock+0xe/0x20 > [10663.822400] [] ? __d_lookup+0x136/0x150 > [10663.822406] [] ? _raw_spin_lock+0xe/0x20 > [10663.822414] [] ? _atomic_dec_and_lock+0x4d/0x80 > [10663.822422] [] ? mntput_no_expire+0x30/0x110 > [10663.822429] [] ? move_addr_to_kernel+0x65/0x70 > [10663.822435] [] ? verify_iovec+0x88/0xe0 > [10663.822442] [] sys_sendmsg+0x240/0x3a0 > [10663.822450] [] ? __do_fault+0x479/0x560 > [10663.822457] [] ? _raw_spin_lock+0xe/0x20 > [10663.822465] [] ? alloc_fd+0x10a/0x150 > [10663.822473] [] ? do_page_fault+0x15e/0x350 > [10663.822482] [] system_call_fastpath+0x16/0x1b > [10663.822487] Code: 90 48 8d 78 02 be 25 00 00 00 e8 92 1d e2 ff 48 85 c0 75 cf bf 20 00 00 00 e8 c3 b1 c6 ff 49 89 c7 b8 f4 ff ff ff 4d 85 ff 74 bd <4d> 8b 75 70 49 8d 45 70 48 89 45 b8 49 83 ee 58 eb 28 48 8d 55 > [10663.822618] RIP [] __dev_alloc_name+0x9a/0x170 > [10663.822627] RSP > [10663.822631] CR2: 000000000000006d > [10663.822636] ---[ end trace 3dfd6c3ad5327ca7 ]--- This bug was introduced in: commit 81adee47dfb608df3ad0b91d230fb3cef75f0060 Author: Eric W. Biederman Date: Sun Nov 8 00:53:51 2009 -0800 net: Support specifying the network namespace upon device creation. There is no good reason to not support userspace specifying the network namespace during device creation, and it makes it easier to create a network device and pass it to a child network namespace with a well known name. We have to be careful to ensure that the target network namespace for the new device exists through the life of the call. To keep that logic clear I have factored out the network namespace grabbing logic into rtnl_link_get_net. In addtion we need to continue to pass the source network namespace to the rtnl_link_ops.newlink method so that we can find the base device source network namespace. Signed-off-by: Eric W. Biederman Acked-by: Eric Dumazet Where apparently I forgot to add error handling to the path where we create a new network device in a new network namespace, and pass in an invalid pid. Cc: stable@kernel.org Reported-by: Ed Swierk Signed-off-by: "Eric W. Biederman" Signed-off-by: David S. Miller --- net/core/rtnetlink.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index 31459ef13ca..2d65c6bb24c 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -1671,6 +1671,9 @@ replay: snprintf(ifname, IFNAMSIZ, "%s%%d", ops->kind); dest_net = rtnl_link_get_net(net, tb); + if (IS_ERR(dest_net)) + return PTR_ERR(dest_net); + dev = rtnl_create_link(net, dest_net, ifname, ops, tb); if (IS_ERR(dev)) -- cgit v1.2.3-18-g5258 From 709b46e8d90badda1898caea50483c12af178e96 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Sat, 29 Jan 2011 16:15:56 +0000 Subject: net: Add compat ioctl support for the ipv4 multicast ioctl SIOCGETSGCNT SIOCGETSGCNT is not a unique ioctl value as it it maps tio SIOCPROTOPRIVATE +1, which unfortunately means the existing infrastructure for compat networking ioctls is insufficient. A trivial compact ioctl implementation would conflict with: SIOCAX25ADDUID SIOCAIPXPRISLT SIOCGETSGCNT_IN6 SIOCGETSGCNT SIOCRSSCAUSE SIOCX25SSUBSCRIP SIOCX25SDTEFACILITIES To make this work I have updated the compat_ioctl decode path to mirror the the normal ioctl decode path. I have added an ipv4 inet_compat_ioctl function so that I can have ipv4 specific compat ioctls. I have added a compat_ioctl function into struct proto so I can break out ioctls by which kind of ip socket I am using. I have added a compat_raw_ioctl function because SIOCGETSGCNT only works on raw sockets. I have added a ipmr_compat_ioctl that mirrors the normal ipmr_ioctl. This was necessary because unfortunately the struct layout for the SIOCGETSGCNT has unsigned longs in it so changes between 32bit and 64bit kernels. This change was sufficient to run a 32bit ip multicast routing daemon on a 64bit kernel. Reported-by: Bill Fenner Signed-off-by: Eric W. Biederman Signed-off-by: David S. Miller --- include/linux/mroute.h | 1 + include/net/sock.h | 2 ++ net/ipv4/af_inet.c | 16 ++++++++++++++++ net/ipv4/ipmr.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++ net/ipv4/raw.c | 19 +++++++++++++++++++ 5 files changed, 84 insertions(+) diff --git a/include/linux/mroute.h b/include/linux/mroute.h index 0fa7a3a874c..b21d567692b 100644 --- a/include/linux/mroute.h +++ b/include/linux/mroute.h @@ -150,6 +150,7 @@ static inline int ip_mroute_opt(int opt) extern int ip_mroute_setsockopt(struct sock *, int, char __user *, unsigned int); extern int ip_mroute_getsockopt(struct sock *, int, char __user *, int __user *); extern int ipmr_ioctl(struct sock *sk, int cmd, void __user *arg); +extern int ipmr_compat_ioctl(struct sock *sk, unsigned int cmd, void __user *arg); extern int ip_mr_init(void); #else static inline diff --git a/include/net/sock.h b/include/net/sock.h index d884d268c70..bc1cf7d88cc 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -753,6 +753,8 @@ struct proto { int level, int optname, char __user *optval, int __user *option); + int (*compat_ioctl)(struct sock *sk, + unsigned int cmd, unsigned long arg); #endif int (*sendmsg)(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, size_t len); diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c index f2b61107df6..45b89d7bda5 100644 --- a/net/ipv4/af_inet.c +++ b/net/ipv4/af_inet.c @@ -880,6 +880,19 @@ int inet_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg) } EXPORT_SYMBOL(inet_ioctl); +#ifdef CONFIG_COMPAT +int inet_compat_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg) +{ + struct sock *sk = sock->sk; + int err = -ENOIOCTLCMD; + + if (sk->sk_prot->compat_ioctl) + err = sk->sk_prot->compat_ioctl(sk, cmd, arg); + + return err; +} +#endif + const struct proto_ops inet_stream_ops = { .family = PF_INET, .owner = THIS_MODULE, @@ -903,6 +916,7 @@ const struct proto_ops inet_stream_ops = { #ifdef CONFIG_COMPAT .compat_setsockopt = compat_sock_common_setsockopt, .compat_getsockopt = compat_sock_common_getsockopt, + .compat_ioctl = inet_compat_ioctl, #endif }; EXPORT_SYMBOL(inet_stream_ops); @@ -929,6 +943,7 @@ const struct proto_ops inet_dgram_ops = { #ifdef CONFIG_COMPAT .compat_setsockopt = compat_sock_common_setsockopt, .compat_getsockopt = compat_sock_common_getsockopt, + .compat_ioctl = inet_compat_ioctl, #endif }; EXPORT_SYMBOL(inet_dgram_ops); @@ -959,6 +974,7 @@ static const struct proto_ops inet_sockraw_ops = { #ifdef CONFIG_COMPAT .compat_setsockopt = compat_sock_common_setsockopt, .compat_getsockopt = compat_sock_common_getsockopt, + .compat_ioctl = inet_compat_ioctl, #endif }; diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c index 3f3a9afd73e..7e41ac0b926 100644 --- a/net/ipv4/ipmr.c +++ b/net/ipv4/ipmr.c @@ -60,6 +60,7 @@ #include #include #include +#include #include #include #include @@ -1434,6 +1435,51 @@ int ipmr_ioctl(struct sock *sk, int cmd, void __user *arg) } } +#ifdef CONFIG_COMPAT +struct compat_sioc_sg_req { + struct in_addr src; + struct in_addr grp; + compat_ulong_t pktcnt; + compat_ulong_t bytecnt; + compat_ulong_t wrong_if; +}; + +int ipmr_compat_ioctl(struct sock *sk, unsigned int cmd, void __user *arg) +{ + struct sioc_sg_req sr; + struct mfc_cache *c; + struct net *net = sock_net(sk); + struct mr_table *mrt; + + mrt = ipmr_get_table(net, raw_sk(sk)->ipmr_table ? : RT_TABLE_DEFAULT); + if (mrt == NULL) + return -ENOENT; + + switch (cmd) { + case SIOCGETSGCNT: + if (copy_from_user(&sr, arg, sizeof(sr))) + return -EFAULT; + + rcu_read_lock(); + c = ipmr_cache_find(mrt, sr.src.s_addr, sr.grp.s_addr); + if (c) { + sr.pktcnt = c->mfc_un.res.pkt; + sr.bytecnt = c->mfc_un.res.bytes; + sr.wrong_if = c->mfc_un.res.wrong_if; + rcu_read_unlock(); + + if (copy_to_user(arg, &sr, sizeof(sr))) + return -EFAULT; + return 0; + } + rcu_read_unlock(); + return -EADDRNOTAVAIL; + default: + return -ENOIOCTLCMD; + } +} +#endif + static int ipmr_device_event(struct notifier_block *this, unsigned long event, void *ptr) { diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c index a3d5ab786e8..6390ba299b3 100644 --- a/net/ipv4/raw.c +++ b/net/ipv4/raw.c @@ -76,6 +76,7 @@ #include #include #include +#include static struct raw_hashinfo raw_v4_hashinfo = { .lock = __RW_LOCK_UNLOCKED(raw_v4_hashinfo.lock), @@ -838,6 +839,23 @@ static int raw_ioctl(struct sock *sk, int cmd, unsigned long arg) } } +#ifdef CONFIG_COMPAT +static int compat_raw_ioctl(struct sock *sk, unsigned int cmd, unsigned long arg) +{ + switch (cmd) { + case SIOCOUTQ: + case SIOCINQ: + return -ENOIOCTLCMD; + default: +#ifdef CONFIG_IP_MROUTE + return ipmr_compat_ioctl(sk, cmd, compat_ptr(arg)); +#else + return -ENOIOCTLCMD; +#endif + } +} +#endif + struct proto raw_prot = { .name = "RAW", .owner = THIS_MODULE, @@ -860,6 +878,7 @@ struct proto raw_prot = { #ifdef CONFIG_COMPAT .compat_setsockopt = compat_raw_setsockopt, .compat_getsockopt = compat_raw_getsockopt, + .compat_ioctl = compat_raw_ioctl, #endif }; -- cgit v1.2.3-18-g5258 From 2674c15870f888cb732a564fc504ce17654afc64 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 28 Jan 2011 18:34:05 +0100 Subject: batman-adv: Remove vis info on hashing errors A newly created vis info object must be removed when it couldn't be added to the hash. The old_info which has to be replaced was already removed and isn't related to the hash anymore. Signed-off-by: Sven Eckelmann --- net/batman-adv/vis.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/batman-adv/vis.c b/net/batman-adv/vis.c index f69a3748f8a..0be55beba05 100644 --- a/net/batman-adv/vis.c +++ b/net/batman-adv/vis.c @@ -444,7 +444,7 @@ static struct vis_info *add_packet(struct bat_priv *bat_priv, info); if (hash_added < 0) { /* did not work (for some reason) */ - kref_put(&old_info->refcount, free_info); + kref_put(&info->refcount, free_info); info = NULL; } -- cgit v1.2.3-18-g5258 From dda9fc6b2c59f056e7a2b313b8423b14a4df25a9 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 28 Jan 2011 18:34:06 +0100 Subject: batman-adv: Remove vis info element in free_info The free_info function will be called when no reference to the info object exists anymore. It must be ensured that the allocated memory gets freed and not only the elements which are managed by the info object. Signed-off-by: Sven Eckelmann --- net/batman-adv/vis.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/batman-adv/vis.c b/net/batman-adv/vis.c index 0be55beba05..988296cdf7c 100644 --- a/net/batman-adv/vis.c +++ b/net/batman-adv/vis.c @@ -64,6 +64,7 @@ static void free_info(struct kref *ref) spin_unlock_bh(&bat_priv->vis_list_lock); kfree_skb(info->skb_packet); + kfree(info); } /* Compare two vis packets, used by the hashing algorithm */ -- cgit v1.2.3-18-g5258 From 1181e1daace88018b2ff66592aa10a4791d705ff Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 28 Jan 2011 18:34:07 +0100 Subject: batman-adv: Make vis info stack traversal threadsafe The batman-adv vis server has to a stack which stores all information about packets which should be send later. This stack is protected with a spinlock that is used to prevent concurrent write access to it. The send_vis_packets function has to take all elements from the stack and send them to other hosts over the primary interface. The send will be initiated without the lock which protects the stack. The implementation using list_for_each_entry_safe has the problem that it stores the next element as "safe ptr" to allow the deletion of the current element in the list. The list may be modified during the unlock/lock pair in the loop body which may make the safe pointer not pointing to correct next element. It is safer to remove and use the first element from the stack until no elements are available. This does not need reduntant information which would have to be validated each time the lock was removed. Reported-by: Russell Senior Signed-off-by: Sven Eckelmann --- net/batman-adv/vis.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/net/batman-adv/vis.c b/net/batman-adv/vis.c index 988296cdf7c..de1022cacaf 100644 --- a/net/batman-adv/vis.c +++ b/net/batman-adv/vis.c @@ -816,7 +816,7 @@ static void send_vis_packets(struct work_struct *work) container_of(work, struct delayed_work, work); struct bat_priv *bat_priv = container_of(delayed_work, struct bat_priv, vis_work); - struct vis_info *info, *temp; + struct vis_info *info; spin_lock_bh(&bat_priv->vis_hash_lock); purge_vis_packets(bat_priv); @@ -826,8 +826,9 @@ static void send_vis_packets(struct work_struct *work) send_list_add(bat_priv, bat_priv->my_vis_info); } - list_for_each_entry_safe(info, temp, &bat_priv->vis_send_list, - send_list) { + while (!list_empty(&bat_priv->vis_send_list)) { + info = list_first_entry(&bat_priv->vis_send_list, + typeof(*info), send_list); kref_get(&info->refcount); spin_unlock_bh(&bat_priv->vis_hash_lock); -- cgit v1.2.3-18-g5258 From e468e0017b656841b661e57a948c3b858d58b959 Mon Sep 17 00:00:00 2001 From: Stefan Weil Date: Fri, 28 Jan 2011 23:35:18 +0100 Subject: drm/radeon: Fix wrong boolean operator This error is reported by cppcheck: drivers/gpu/drm/radeon/radeon_encoders.c:1066: warning: Mutual exclusion over || always evaluates to true. Did you intend to use && instead? It looks like cppcheck is correct, so fix this. No test was run. Cc: David Airlie Reviewed-by: Alex Deucher Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Stefan Weil Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_encoders.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 5e90984d5ad..d4a54224761 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -1063,7 +1063,7 @@ atombios_set_edp_panel_power(struct drm_connector *connector, int action) if (!ASIC_IS_DCE4(rdev)) return; - if ((action != ATOM_TRANSMITTER_ACTION_POWER_ON) || + if ((action != ATOM_TRANSMITTER_ACTION_POWER_ON) && (action != ATOM_TRANSMITTER_ACTION_POWER_OFF)) return; -- cgit v1.2.3-18-g5258 From de171cb9a52598cc023adceafc6c166112401386 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Mon, 31 Jan 2011 11:57:42 +1100 Subject: md: revert change to raid_disks on failure. If we try to update_raid_disks and it fails, we should put 'delta_disks' back to zero. This is important because some code, such as slot_store, assumes that delta_disks has been validated. Signed-off-by: NeilBrown --- drivers/md/md.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/md/md.c b/drivers/md/md.c index b76cfc89e1b..e636e404e9a 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -5578,6 +5578,8 @@ static int update_raid_disks(mddev_t *mddev, int raid_disks) mddev->delta_disks = raid_disks - mddev->raid_disks; rv = mddev->pers->check_reshape(mddev); + if (rv < 0) + mddev->delta_disks = 0; return rv; } -- cgit v1.2.3-18-g5258 From 87a8dec91e15954f0cf86be6c21741d991d83621 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Mon, 31 Jan 2011 11:57:43 +1100 Subject: md: simplify some 'if' conditionals in raid5_start_reshape. There are two consecutive 'if' statements. if (mddev->delta_disks >= 0) .... if (mddev->delta_disks > 0) The code in the second is equally valid if delta_disks == 0, and these two statements are the only place that 'added_devices' is used. So make them a single if statement, make added_devices a local variable, and re-indent it all. No functional change. Signed-off-by: NeilBrown --- drivers/md/raid5.c | 55 +++++++++++++++++++++++++++--------------------------- 1 file changed, 28 insertions(+), 27 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 5044babfcda..fa5519389a1 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -5517,7 +5517,6 @@ static int raid5_start_reshape(mddev_t *mddev) raid5_conf_t *conf = mddev->private; mdk_rdev_t *rdev; int spares = 0; - int added_devices = 0; unsigned long flags; if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) @@ -5571,34 +5570,36 @@ static int raid5_start_reshape(mddev_t *mddev) * to correctly record the "partially reconstructed" state of * such devices during the reshape and confusion could result. */ - if (mddev->delta_disks >= 0) - list_for_each_entry(rdev, &mddev->disks, same_set) - if (rdev->raid_disk < 0 && - !test_bit(Faulty, &rdev->flags)) { - if (raid5_add_disk(mddev, rdev) == 0) { - char nm[20]; - if (rdev->raid_disk >= conf->previous_raid_disks) { - set_bit(In_sync, &rdev->flags); - added_devices++; + if (mddev->delta_disks >= 0) { + int added_devices = 0; + list_for_each_entry(rdev, &mddev->disks, same_set) + if (rdev->raid_disk < 0 && + !test_bit(Faulty, &rdev->flags)) { + if (raid5_add_disk(mddev, rdev) == 0) { + char nm[20]; + if (rdev->raid_disk + >= conf->previous_raid_disks) { + set_bit(In_sync, &rdev->flags); + added_devices++; + } else + rdev->recovery_offset = 0; + sprintf(nm, "rd%d", rdev->raid_disk); + if (sysfs_create_link(&mddev->kobj, + &rdev->kobj, nm)) + /* Failure here is OK */; } else - rdev->recovery_offset = 0; - sprintf(nm, "rd%d", rdev->raid_disk); - if (sysfs_create_link(&mddev->kobj, - &rdev->kobj, nm)) - /* Failure here is OK */; - } else - break; - } else if (rdev->raid_disk >= conf->previous_raid_disks - && !test_bit(Faulty, &rdev->flags)) { - /* This is a spare that was manually added */ - set_bit(In_sync, &rdev->flags); - added_devices++; - } + break; + } else if (rdev->raid_disk >= conf->previous_raid_disks + && !test_bit(Faulty, &rdev->flags)) { + /* This is a spare that was manually added */ + set_bit(In_sync, &rdev->flags); + added_devices++; + } - /* When a reshape changes the number of devices, ->degraded - * is measured against the larger of the pre and post number of - * devices.*/ - if (mddev->delta_disks > 0) { + /* When a reshape changes the number of devices, + * ->degraded is measured against the larger of the + * pre and post number of devices. + */ spin_lock_irqsave(&conf->device_lock, flags); mddev->degraded += (conf->raid_disks - conf->previous_raid_disks) - added_devices; -- cgit v1.2.3-18-g5258 From 469518a3455c79619e9231aeffeffa2e2989f738 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Mon, 31 Jan 2011 11:57:43 +1100 Subject: md: fix the test for finding spares in raid5_start_reshape. As spares can be added to the array before the reshape is started, we need to find and count them when checking there are enough. The array could have been degraded, so we need to check all devices, no just those out side of the range of devices in the array before the reshape. So instead of checking the index, check the In_sync flag as that reliably tells if the device is a spare or this purpose. Signed-off-by: NeilBrown --- drivers/md/raid5.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index fa5519389a1..a6d2c3ddeee 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -5526,8 +5526,8 @@ static int raid5_start_reshape(mddev_t *mddev) return -ENOSPC; list_for_each_entry(rdev, &mddev->disks, same_set) - if ((rdev->raid_disk < 0 || rdev->raid_disk >= conf->raid_disks) - && !test_bit(Faulty, &rdev->flags)) + if (!test_bit(In_sync, &rdev->flags) + && !test_bit(Faulty, &rdev->flags)) spares++; if (spares - mddev->degraded < mddev->delta_disks - conf->max_degraded) -- cgit v1.2.3-18-g5258 From 50da08409654e036c4c964a473567a61a654cb83 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Mon, 31 Jan 2011 11:57:43 +1100 Subject: md: don't abort checking spares as soon as one cannot be added. As spares can be added manually before a reshape starts, we need to find them all to mark some of them as in_sync. Previously we would abort looking for spares when we found an unallocated spare what could not be added to the array (implying there was no room for new spares). However already-added spares could be later in the list, so we need to keep searching. Signed-off-by: NeilBrown --- drivers/md/raid5.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index a6d2c3ddeee..70281282419 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -5587,8 +5587,7 @@ static int raid5_start_reshape(mddev_t *mddev) if (sysfs_create_link(&mddev->kobj, &rdev->kobj, nm)) /* Failure here is OK */; - } else - break; + } } else if (rdev->raid_disk >= conf->previous_raid_disks && !test_bit(Faulty, &rdev->flags)) { /* This is a spare that was manually added */ -- cgit v1.2.3-18-g5258 From f21e9ff7f77d41ceca4e1e5ee5a4efa5ad7a5e40 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Mon, 31 Jan 2011 12:10:09 +1100 Subject: md: Remove the AllReserved flag for component devices. This flag is not needed and is used badly. Devices that are included in a native-metadata array are reserved exclusively for that array - and currently have AllReserved set. They all are bd_claimed for the rdev and so cannot be shared. Devices that are included in external-metadata arrays can be shared among multiple arrays - providing there is no overlap. These are bd_claimed for md in general - not for a particular rdev. When changing the amount of a device that is used in an array we need to check for overlap. This currently includes a check on AllReserved So even without overlap, sharing with an AllReserved device is not allowed. However the bd_claim usage already precludes sharing with these devices, so the test on AllReserved is not needed. And in fact it is wrong. As this is the only use of AllReserved, simply remove all usage and definition of AllReserved. Signed-off-by: NeilBrown --- drivers/md/md.c | 13 +++++-------- drivers/md/md.h | 2 -- 2 files changed, 5 insertions(+), 10 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index e636e404e9a..f539b587ca7 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -1947,8 +1947,6 @@ static int lock_rdev(mdk_rdev_t *rdev, dev_t dev, int shared) __bdevname(dev, b)); return PTR_ERR(bdev); } - if (!shared) - set_bit(AllReserved, &rdev->flags); rdev->bdev = bdev; return err; } @@ -2610,12 +2608,11 @@ rdev_size_store(mdk_rdev_t *rdev, const char *buf, size_t len) mddev_lock(mddev); list_for_each_entry(rdev2, &mddev->disks, same_set) - if (test_bit(AllReserved, &rdev2->flags) || - (rdev->bdev == rdev2->bdev && - rdev != rdev2 && - overlaps(rdev->data_offset, rdev->sectors, - rdev2->data_offset, - rdev2->sectors))) { + if (rdev->bdev == rdev2->bdev && + rdev != rdev2 && + overlaps(rdev->data_offset, rdev->sectors, + rdev2->data_offset, + rdev2->sectors)) { overlap = 1; break; } diff --git a/drivers/md/md.h b/drivers/md/md.h index eec517ced31..7e90b8593b2 100644 --- a/drivers/md/md.h +++ b/drivers/md/md.h @@ -93,8 +93,6 @@ struct mdk_rdev_s #define Faulty 1 /* device is known to have a fault */ #define In_sync 2 /* device is in_sync with rest of array */ #define WriteMostly 4 /* Avoid reading if at all possible */ -#define AllReserved 6 /* If whole device is reserved for - * one array */ #define AutoDetected 7 /* added by auto-detect */ #define Blocked 8 /* An error occured on an externally * managed array, don't allow writes -- cgit v1.2.3-18-g5258 From fc3a08b85b7a4f6c1069e5f71f6ad40d925ff55b Mon Sep 17 00:00:00 2001 From: Krzysztof Wojcik Date: Mon, 31 Jan 2011 13:47:13 +1100 Subject: Add raid1->raid0 takeover support This patch introduces raid 1 to raid0 takeover operation in kernel space. Signed-off-by: Krzysztof Wojcik Signed-off-by: Neil Brown --- drivers/md/raid0.c | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c index a39f4c355e5..637a96855ed 100644 --- a/drivers/md/raid0.c +++ b/drivers/md/raid0.c @@ -179,6 +179,14 @@ static int create_strip_zones(mddev_t *mddev, raid0_conf_t **private_conf) rdev1->new_raid_disk = j; } + if (mddev->level == 1) { + /* taiking over a raid1 array- + * we have only one active disk + */ + j = 0; + rdev1->new_raid_disk = j; + } + if (j < 0 || j >= mddev->raid_disks) { printk(KERN_ERR "md/raid0:%s: bad disk number %d - " "aborting!\n", mdname(mddev), j); @@ -644,12 +652,38 @@ static void *raid0_takeover_raid10(mddev_t *mddev) return priv_conf; } +static void *raid0_takeover_raid1(mddev_t *mddev) +{ + raid0_conf_t *priv_conf; + + /* Check layout: + * - (N - 1) mirror drives must be already faulty + */ + if ((mddev->raid_disks - 1) != mddev->degraded) { + printk(KERN_ERR "md/raid0:%s: (N - 1) mirrors drives must be already faulty!\n", + mdname(mddev)); + return ERR_PTR(-EINVAL); + } + + /* Set new parameters */ + mddev->new_level = 0; + mddev->new_layout = 0; + mddev->new_chunk_sectors = 128; /* by default set chunk size to 64k */ + mddev->delta_disks = 1 - mddev->raid_disks; + /* make sure it will be not marked as dirty */ + mddev->recovery_cp = MaxSector; + + create_strip_zones(mddev, &priv_conf); + return priv_conf; +} + static void *raid0_takeover(mddev_t *mddev) { /* raid0 can take over: * raid4 - if all data disks are active. * raid5 - providing it is Raid4 layout and one disk is faulty * raid10 - assuming we have all necessary active disks + * raid1 - with (N -1) mirror drives faulty */ if (mddev->level == 4) return raid0_takeover_raid45(mddev); @@ -665,6 +699,12 @@ static void *raid0_takeover(mddev_t *mddev) if (mddev->level == 10) return raid0_takeover_raid10(mddev); + if (mddev->level == 1) + return raid0_takeover_raid1(mddev); + + printk(KERN_ERR "Takeover from raid%i to raid0 not supported\n", + mddev->level); + return ERR_PTR(-EINVAL); } -- cgit v1.2.3-18-g5258 From a8c42c7f476b5bb39bb3a5b32d5473b9a46cadb9 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Mon, 31 Jan 2011 13:47:13 +1100 Subject: md: Don't use remove_and_add_spares to remove failed devices from a read-only array remove_and_add_spares is called in two places where the needs really are very different. remove_and_add_spares should not be called on an array which is about to be reshaped as some extra devices might have been manually added and that would remove them. However if the array is 'read-auto', that will currently happen, which is bad. So in the 'ro != 0' case don't call remove_and_add_spares but simply remove the failed devices as the comment suggests is needed. Signed-off-by: NeilBrown --- drivers/md/md.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index f539b587ca7..5b93829f3d4 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -7027,7 +7027,7 @@ static int remove_and_add_spares(mddev_t *mddev) } } - if (mddev->degraded && ! mddev->ro && !mddev->recovery_disabled) { + if (mddev->degraded && !mddev->recovery_disabled) { list_for_each_entry(rdev, &mddev->disks, same_set) { if (rdev->raid_disk >= 0 && !test_bit(In_sync, &rdev->flags) && @@ -7150,7 +7150,20 @@ void md_check_recovery(mddev_t *mddev) /* Only thing we do on a ro array is remove * failed devices. */ - remove_and_add_spares(mddev); + mdk_rdev_t *rdev; + list_for_each_entry(rdev, &mddev->disks, same_set) + if (rdev->raid_disk >= 0 && + !test_bit(Blocked, &rdev->flags) && + test_bit(Faulty, &rdev->flags) && + atomic_read(&rdev->nr_pending)==0) { + if (mddev->pers->hot_remove_disk( + mddev, rdev->raid_disk)==0) { + char nm[20]; + sprintf(nm,"rd%d", rdev->raid_disk); + sysfs_remove_link(&mddev->kobj, nm); + rdev->raid_disk = -1; + } + } clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery); goto unlock; } -- cgit v1.2.3-18-g5258 From af5eb745efe97d91d2cbe793029838b3311c15da Mon Sep 17 00:00:00 2001 From: Anton Altaparmakov Date: Fri, 28 Jan 2011 20:45:28 +0000 Subject: NTFS: Fix invalid pointer dereference in ntfs_mft_record_alloc(). In ntfs_mft_record_alloc() when mapping the new extent mft record with map_extent_mft_record() we overwrite @m with the return value and on error, we then try to use the old @m but that is no longer there as @m now contains an error code instead so we crash when dereferencing the error code as if it were a pointer. The simple fix is to use a temporary variable to store the return value thus preserving the original @m for later use. This is a backport from the commercial Tuxera-NTFS driver and is well tested... Thanks go to Julia Lawall for pointing this out (whilst I had fixed it in the commercial driver I had failed to fix it in the Linux kernel). Signed-off-by: Anton Altaparmakov Signed-off-by: Linus Torvalds --- Documentation/filesystems/ntfs.txt | 2 ++ fs/ntfs/mft.c | 11 +++++++---- 2 files changed, 9 insertions(+), 4 deletions(-) diff --git a/Documentation/filesystems/ntfs.txt b/Documentation/filesystems/ntfs.txt index 6ef8cf3bc9a..933bc66ccff 100644 --- a/Documentation/filesystems/ntfs.txt +++ b/Documentation/filesystems/ntfs.txt @@ -460,6 +460,8 @@ Note, a technical ChangeLog aimed at kernel hackers is in fs/ntfs/ChangeLog. 2.1.30: - Fix writev() (it kept writing the first segment over and over again instead of moving onto subsequent segments). + - Fix crash in ntfs_mft_record_alloc() when mapping the new extent mft + record failed. 2.1.29: - Fix a deadlock when mounting read-write. 2.1.28: diff --git a/fs/ntfs/mft.c b/fs/ntfs/mft.c index b572b672718..326e7475a22 100644 --- a/fs/ntfs/mft.c +++ b/fs/ntfs/mft.c @@ -1,7 +1,7 @@ /** * mft.c - NTFS kernel mft record operations. Part of the Linux-NTFS project. * - * Copyright (c) 2001-2006 Anton Altaparmakov + * Copyright (c) 2001-2011 Anton Altaparmakov and Tuxera Inc. * Copyright (c) 2002 Richard Russon * * This program/include file is free software; you can redistribute it and/or @@ -2576,6 +2576,8 @@ mft_rec_already_initialized: flush_dcache_page(page); SetPageUptodate(page); if (base_ni) { + MFT_RECORD *m_tmp; + /* * Setup the base mft record in the extent mft record. This * completes initialization of the allocated extent mft record @@ -2588,11 +2590,11 @@ mft_rec_already_initialized: * attach it to the base inode @base_ni and map, pin, and lock * its, i.e. the allocated, mft record. */ - m = map_extent_mft_record(base_ni, bit, &ni); - if (IS_ERR(m)) { + m_tmp = map_extent_mft_record(base_ni, bit, &ni); + if (IS_ERR(m_tmp)) { ntfs_error(vol->sb, "Failed to map allocated extent " "mft record 0x%llx.", (long long)bit); - err = PTR_ERR(m); + err = PTR_ERR(m_tmp); /* Set the mft record itself not in use. */ m->flags &= cpu_to_le16( ~le16_to_cpu(MFT_RECORD_IN_USE)); @@ -2603,6 +2605,7 @@ mft_rec_already_initialized: ntfs_unmap_page(page); goto undo_mftbmp_alloc; } + BUG_ON(m != m_tmp); /* * Make sure the allocated mft record is written out to disk. * No need to set the inode dirty because the caller is going -- cgit v1.2.3-18-g5258 From 2f215a7d6d1d8ed0bbdda4fc4f7d64e3a1d46acc Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Fri, 28 Jan 2011 22:05:25 +0800 Subject: intel_scu_ipc: remove duplicated #include Remove duplicated #include('s) in drivers/platform/x86/intel_scu_ipc.c Signed-off-by: Huang Weiyi Signed-off-by: Linus Torvalds --- drivers/platform/x86/intel_scu_ipc.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c index f374c5961b3..a91d510a798 100644 --- a/drivers/platform/x86/intel_scu_ipc.c +++ b/drivers/platform/x86/intel_scu_ipc.c @@ -26,7 +26,6 @@ #include #include #include -#include /* IPC defines the following message types */ #define IPCMSG_WATCHDOG_TIMER 0xF8 /* Set Kernel Watchdog Threshold */ -- cgit v1.2.3-18-g5258 From aa5bd67dcfdf9af34c7fa36ebc87d4e1f7e91873 Mon Sep 17 00:00:00 2001 From: Kacper Kornet Date: Sat, 29 Jan 2011 00:21:04 +0100 Subject: Fix prlimit64 for suid/sgid processes Since check_prlimit_permission always fails in the case of SUID/GUID processes, such processes are not able to read or set their own limits. This commit changes this by assuming that process can always read/change its own limits. Signed-off-by: Kacper Kornet Acked-by: Jiri Slaby Signed-off-by: Linus Torvalds --- kernel/sys.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/sys.c b/kernel/sys.c index 31b71a276b4..18da702ec81 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -1385,7 +1385,8 @@ static int check_prlimit_permission(struct task_struct *task) const struct cred *cred = current_cred(), *tcred; tcred = __task_cred(task); - if ((cred->uid != tcred->euid || + if (current != task && + (cred->uid != tcred->euid || cred->uid != tcred->suid || cred->uid != tcred->uid || cred->gid != tcred->egid || -- cgit v1.2.3-18-g5258 From 54e74b87e2a9941c6fa82189f270b47cceeba714 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 28 Jan 2011 23:33:29 -0800 Subject: Input: rc-keymap - return KEY_RESERVED for unknown mappings Do not respond with -EINVAL to EVIOCGKEYCODE for not-yet-mapped scancodes, but rather return KEY_RESERVED. This fixes breakage with Ubuntu's input-kbd utility that stopped returning full keymaps for remote controls. Tested-by: Mauro Carvalho Chehab Tested-by: Mark Lord Signed-off-by: Dmitry Torokhov Signed-off-by: Linus Torvalds --- drivers/media/rc/rc-main.c | 28 +++++++++++++++++----------- 1 file changed, 17 insertions(+), 11 deletions(-) diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c index 72be8a02118..512a2f4ada0 100644 --- a/drivers/media/rc/rc-main.c +++ b/drivers/media/rc/rc-main.c @@ -458,21 +458,27 @@ static int ir_getkeycode(struct input_dev *idev, index = ir_lookup_by_scancode(rc_map, scancode); } - if (index >= rc_map->len) { - if (!(ke->flags & INPUT_KEYMAP_BY_INDEX)) - IR_dprintk(1, "unknown key for scancode 0x%04x\n", - scancode); + if (index < rc_map->len) { + entry = &rc_map->scan[index]; + + ke->index = index; + ke->keycode = entry->keycode; + ke->len = sizeof(entry->scancode); + memcpy(ke->scancode, &entry->scancode, sizeof(entry->scancode)); + + } else if (!(ke->flags & INPUT_KEYMAP_BY_INDEX)) { + /* + * We do not really know the valid range of scancodes + * so let's respond with KEY_RESERVED to anything we + * do not have mapping for [yet]. + */ + ke->index = index; + ke->keycode = KEY_RESERVED; + } else { retval = -EINVAL; goto out; } - entry = &rc_map->scan[index]; - - ke->index = index; - ke->keycode = entry->keycode; - ke->len = sizeof(entry->scancode); - memcpy(ke->scancode, &entry->scancode, sizeof(entry->scancode)); - retval = 0; out: -- cgit v1.2.3-18-g5258 From ffeb414a59291d5891f09727beb793c109f19f08 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Sat, 29 Jan 2011 07:03:02 -0500 Subject: cifs: fix two compiler warning about uninitialized vars MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit fs/cifs/link.c: In function ‘symlink_hash’: fs/cifs/link.c:58:3: warning: ‘rc’ may be used uninitialized in this function [-Wuninitialized] fs/cifs/smbencrypt.c: In function ‘mdfour’: fs/cifs/smbencrypt.c:61:3: warning: ‘rc’ may be used uninitialized in this function [-Wuninitialized] Reviewed-by: Shirish Pargaonkar Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/link.c | 3 ++- fs/cifs/smbencrypt.c | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/cifs/link.c b/fs/cifs/link.c index 02cd60aefbf..e8804d37340 100644 --- a/fs/cifs/link.c +++ b/fs/cifs/link.c @@ -55,8 +55,9 @@ symlink_hash(unsigned int link_len, const char *link_str, u8 *md5_hash) md5 = crypto_alloc_shash("md5", 0, 0); if (IS_ERR(md5)) { + rc = PTR_ERR(md5); cERROR(1, "%s: Crypto md5 allocation error %d\n", __func__, rc); - return PTR_ERR(md5); + return rc; } size = sizeof(struct shash_desc) + crypto_shash_descsize(md5); sdescmd5 = kmalloc(size, GFP_KERNEL); diff --git a/fs/cifs/smbencrypt.c b/fs/cifs/smbencrypt.c index b5450e9f40c..b5041c84998 100644 --- a/fs/cifs/smbencrypt.c +++ b/fs/cifs/smbencrypt.c @@ -58,8 +58,9 @@ mdfour(unsigned char *md4_hash, unsigned char *link_str, int link_len) md4 = crypto_alloc_shash("md4", 0, 0); if (IS_ERR(md4)) { + rc = PTR_ERR(md4); cERROR(1, "%s: Crypto md4 allocation error %d\n", __func__, rc); - return PTR_ERR(md4); + return rc; } size = sizeof(struct shash_desc) + crypto_shash_descsize(md4); sdescmd4 = kmalloc(size, GFP_KERNEL); -- cgit v1.2.3-18-g5258 From 7281f8129c362436237b82c8c026494dd36479dc Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Mon, 31 Jan 2011 14:30:27 +1100 Subject: md: don't clear curr_resync_completed at end of resync. There is no need to set this to zero at this point. It will be set to zero by remove_and_add_spares or at the start of md_do_sync at the latest. And setting it to zero before MD_RECOVERY_RUNNING is cleared can make a 'zero' appear briefly in the 'sync_completed' sysfs attribute just as resync is finishing. So simply remove this setting to zero. Signed-off-by: NeilBrown --- drivers/md/md.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 5b93829f3d4..f2d5628d51c 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -6984,9 +6984,6 @@ void md_do_sync(mddev_t *mddev) } else if (test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) mddev->resync_min = mddev->curr_resync_completed; mddev->curr_resync = 0; - if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery)) - mddev->curr_resync_completed = 0; - sysfs_notify(&mddev->kobj, NULL, "sync_completed"); wake_up(&resync_wait); set_bit(MD_RECOVERY_DONE, &mddev->recovery); md_wakeup_thread(mddev->thread); -- cgit v1.2.3-18-g5258 From 1be912dde772b77aaaa21770eeabb0a7a5e297a6 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 28 Jan 2011 07:08:28 -0500 Subject: cifs: handle cancelled requests better Currently, when a request is cancelled via signal, we delete the mid immediately. If the request was already transmitted however, the client is still likely to receive a response. When it does, it won't recognize it however and will pop a printk. It's also a little dangerous to just delete the mid entry like this. We may end up reusing that mid. If we do then we could potentially get the response from the first request confused with the later one. Prevent the reuse of mids by marking them as cancelled and keeping them on the pending_mid_q list. If the reply comes in, we'll delete it from the list then. If it never comes, then we'll delete it at reconnect or when cifsd comes down. Reviewed-by: Pavel Shilovsky Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/transport.c | 43 ++++++++++++++++++++++++++++++++++++------- 1 file changed, 36 insertions(+), 7 deletions(-) diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index c1ccca1a933..9b2d0373a8a 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -579,8 +579,17 @@ SendReceive2(const unsigned int xid, struct cifsSesInfo *ses, goto out; rc = wait_for_response(ses->server, midQ); - if (rc != 0) - goto out; + if (rc != 0) { + spin_lock(&GlobalMid_Lock); + if (midQ->midState == MID_REQUEST_SUBMITTED) { + midQ->callback = DeleteMidQEntry; + spin_unlock(&GlobalMid_Lock); + atomic_dec(&ses->server->inFlight); + wake_up(&ses->server->request_q); + return rc; + } + spin_unlock(&GlobalMid_Lock); + } rc = sync_mid_result(midQ, ses->server); if (rc != 0) { @@ -724,8 +733,18 @@ SendReceive(const unsigned int xid, struct cifsSesInfo *ses, goto out; rc = wait_for_response(ses->server, midQ); - if (rc != 0) - goto out; + if (rc != 0) { + spin_lock(&GlobalMid_Lock); + if (midQ->midState == MID_REQUEST_SUBMITTED) { + /* no longer considered to be "in-flight" */ + midQ->callback = DeleteMidQEntry; + spin_unlock(&GlobalMid_Lock); + atomic_dec(&ses->server->inFlight); + wake_up(&ses->server->request_q); + return rc; + } + spin_unlock(&GlobalMid_Lock); + } rc = sync_mid_result(midQ, ses->server); if (rc != 0) { @@ -922,10 +941,20 @@ SendReceiveBlockingLock(const unsigned int xid, struct cifsTconInfo *tcon, } } - if (wait_for_response(ses->server, midQ) == 0) { - /* We got the response - restart system call. */ - rstart = 1; + rc = wait_for_response(ses->server, midQ); + if (rc) { + spin_lock(&GlobalMid_Lock); + if (midQ->midState == MID_REQUEST_SUBMITTED) { + /* no longer considered to be "in-flight" */ + midQ->callback = DeleteMidQEntry; + spin_unlock(&GlobalMid_Lock); + return rc; + } + spin_unlock(&GlobalMid_Lock); } + + /* We got the response - restart system call. */ + rstart = 1; } rc = sync_mid_result(midQ, ses->server); -- cgit v1.2.3-18-g5258 From 2db7c5815555d8daabf7d4ab1253ce690852c140 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 28 Jan 2011 07:08:28 -0500 Subject: cifs: send an NT_CANCEL request when a process is signalled Use the new send_nt_cancel function to send an NT_CANCEL when the process is delivered a fatal signal. This is a "best effort" enterprise however, so don't bother to check the return code. There's nothing we can reasonably do if it fails anyway. Reviewed-by: Pavel Shilovsky Reviewed-by: Suresh Jayaraman Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/transport.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index 9b2d0373a8a..bdaa4aa58b0 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -570,20 +570,25 @@ SendReceive2(const unsigned int xid, struct cifsSesInfo *ses, #endif mutex_unlock(&ses->server->srv_mutex); - cifs_small_buf_release(in_buf); - if (rc < 0) + if (rc < 0) { + cifs_small_buf_release(in_buf); goto out; + } - if (long_op == CIFS_ASYNC_OP) + if (long_op == CIFS_ASYNC_OP) { + cifs_small_buf_release(in_buf); goto out; + } rc = wait_for_response(ses->server, midQ); if (rc != 0) { + send_nt_cancel(ses->server, in_buf, midQ); spin_lock(&GlobalMid_Lock); if (midQ->midState == MID_REQUEST_SUBMITTED) { midQ->callback = DeleteMidQEntry; spin_unlock(&GlobalMid_Lock); + cifs_small_buf_release(in_buf); atomic_dec(&ses->server->inFlight); wake_up(&ses->server->request_q); return rc; @@ -591,6 +596,8 @@ SendReceive2(const unsigned int xid, struct cifsSesInfo *ses, spin_unlock(&GlobalMid_Lock); } + cifs_small_buf_release(in_buf); + rc = sync_mid_result(midQ, ses->server); if (rc != 0) { atomic_dec(&ses->server->inFlight); @@ -734,6 +741,7 @@ SendReceive(const unsigned int xid, struct cifsSesInfo *ses, rc = wait_for_response(ses->server, midQ); if (rc != 0) { + send_nt_cancel(ses->server, in_buf, midQ); spin_lock(&GlobalMid_Lock); if (midQ->midState == MID_REQUEST_SUBMITTED) { /* no longer considered to be "in-flight" */ @@ -943,6 +951,7 @@ SendReceiveBlockingLock(const unsigned int xid, struct cifsTconInfo *tcon, rc = wait_for_response(ses->server, midQ); if (rc) { + send_nt_cancel(ses->server, in_buf, midQ); spin_lock(&GlobalMid_Lock); if (midQ->midState == MID_REQUEST_SUBMITTED) { /* no longer considered to be "in-flight" */ -- cgit v1.2.3-18-g5258 From 68abaffa6bbd3cadfaa4b7216d10bcd32406090b Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 28 Jan 2011 15:05:42 -0500 Subject: cifs: simplify SMB header check routine ...just cleanup. There should be no behavior change. Signed-off-by: Jeff Layton Reviewed-by: Pavel Shilovsky Signed-off-by: Steve French --- fs/cifs/misc.c | 46 ++++++++++++++++++++++++---------------------- 1 file changed, 24 insertions(+), 22 deletions(-) diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c index a09e077ba92..72e99ece78c 100644 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -381,29 +381,31 @@ header_assemble(struct smb_hdr *buffer, char smb_command /* command */ , } static int -checkSMBhdr(struct smb_hdr *smb, __u16 mid) +check_smb_hdr(struct smb_hdr *smb, __u16 mid) { - /* Make sure that this really is an SMB, that it is a response, - and that the message ids match */ - if ((*(__le32 *) smb->Protocol == cpu_to_le32(0x424d53ff)) && - (mid == smb->Mid)) { - if (smb->Flags & SMBFLG_RESPONSE) - return 0; - else { - /* only one valid case where server sends us request */ - if (smb->Command == SMB_COM_LOCKING_ANDX) - return 0; - else - cERROR(1, "Received Request not response"); - } - } else { /* bad signature or mid */ - if (*(__le32 *) smb->Protocol != cpu_to_le32(0x424d53ff)) - cERROR(1, "Bad protocol string signature header %x", - *(unsigned int *) smb->Protocol); - if (mid != smb->Mid) - cERROR(1, "Mids do not match"); + /* does it have the right SMB "signature" ? */ + if (*(__le32 *) smb->Protocol != cpu_to_le32(0x424d53ff)) { + cERROR(1, "Bad protocol string signature header 0x%x", + *(unsigned int *)smb->Protocol); + return 1; } - cERROR(1, "bad smb detected. The Mid=%d", smb->Mid); + + /* Make sure that message ids match */ + if (mid != smb->Mid) { + cERROR(1, "Mids do not match. received=%u expected=%u", + smb->Mid, mid); + return 1; + } + + /* if it's a response then accept */ + if (smb->Flags & SMBFLG_RESPONSE) + return 0; + + /* only one valid case where server sends us request */ + if (smb->Command == SMB_COM_LOCKING_ANDX) + return 0; + + cERROR(1, "Server sent request, not response. mid=%u", smb->Mid); return 1; } @@ -448,7 +450,7 @@ checkSMB(struct smb_hdr *smb, __u16 mid, unsigned int length) return 1; } - if (checkSMBhdr(smb, mid)) + if (check_smb_hdr(smb, mid)) return 1; clc_len = smbCalcSize_LE(smb); -- cgit v1.2.3-18-g5258 From d804d41d163c0975d2890c82d7135ada7a2f23a4 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 28 Jan 2011 15:05:43 -0500 Subject: cifs: don't pop a printk when sending on a socket is interrupted If we kill the process while it's sending on a socket then the kernel_sendmsg will return -EINTR. This is normal. No need to spam the ring buffer with this info. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/transport.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index bdaa4aa58b0..b8c5e2eb43d 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -236,9 +236,9 @@ smb_sendv(struct TCP_Server_Info *server, struct kvec *iov, int n_vec) server->tcpStatus = CifsNeedReconnect; } - if (rc < 0) { + if (rc < 0 && rc != -EINTR) cERROR(1, "Error %d sending data on socket to server", rc); - } else + else rc = 0; /* Don't want to modify the buffer as a -- cgit v1.2.3-18-g5258 From 92a4e0f0169498867ecb19c2244510dd4beba149 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Sat, 29 Jan 2011 07:02:28 -0500 Subject: cifs: force a reconnect if there are too many MIDs in flight Currently, we allow the pending_mid_q to grow without bound with SIGKILL'ed processes. This could eventually be a DoS'able problem. An unprivileged user could a process that does a long-running call and then SIGKILL it. If he can also intercept the NT_CANCEL calls or the replies from the server, then the pending_mid_q could grow very large, possibly even to 2^16 entries which might leave GetNextMid in an infinite loop. Fix this by imposing a hard limit of 32k calls per server. If we cross that limit, set the tcpStatus to CifsNeedReconnect to force cifsd to eventually reconnect the socket and clean out the pending_mid_q. While we're at it, clean up the function a bit and eliminate an unnecessary NULL pointer check. Signed-off-by: Jeff Layton Reviewed-by: Shirish Pargaonkar Signed-off-by: Steve French --- fs/cifs/misc.c | 37 ++++++++++++++++++++++++------------- 1 file changed, 24 insertions(+), 13 deletions(-) diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c index 72e99ece78c..24f0a9d97ad 100644 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -236,10 +236,7 @@ __u16 GetNextMid(struct TCP_Server_Info *server) { __u16 mid = 0; __u16 last_mid; - int collision; - - if (server == NULL) - return mid; + bool collision; spin_lock(&GlobalMid_Lock); last_mid = server->CurrentMid; /* we do not want to loop forever */ @@ -252,24 +249,38 @@ __u16 GetNextMid(struct TCP_Server_Info *server) (and it would also have to have been a request that did not time out) */ while (server->CurrentMid != last_mid) { - struct list_head *tmp; struct mid_q_entry *mid_entry; + unsigned int num_mids; - collision = 0; + collision = false; if (server->CurrentMid == 0) server->CurrentMid++; - list_for_each(tmp, &server->pending_mid_q) { - mid_entry = list_entry(tmp, struct mid_q_entry, qhead); - - if ((mid_entry->mid == server->CurrentMid) && - (mid_entry->midState == MID_REQUEST_SUBMITTED)) { + num_mids = 0; + list_for_each_entry(mid_entry, &server->pending_mid_q, qhead) { + ++num_mids; + if (mid_entry->mid == server->CurrentMid && + mid_entry->midState == MID_REQUEST_SUBMITTED) { /* This mid is in use, try a different one */ - collision = 1; + collision = true; break; } } - if (collision == 0) { + + /* + * if we have more than 32k mids in the list, then something + * is very wrong. Possibly a local user is trying to DoS the + * box by issuing long-running calls and SIGKILL'ing them. If + * we get to 2^16 mids then we're in big trouble as this + * function could loop forever. + * + * Go ahead and assign out the mid in this situation, but force + * an eventual reconnect to clean out the pending_mid_q. + */ + if (num_mids > 32768) + server->tcpStatus = CifsNeedReconnect; + + if (!collision) { mid = server->CurrentMid; break; } -- cgit v1.2.3-18-g5258 From fb526210b2b961b5d590b89fd8f45c0ca5769688 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Thu, 27 Jan 2011 12:32:53 +0000 Subject: DMA: PL08x: fix infinite wait when terminating transfers If we try to pause a channel when terminating a transfer, we could end up spinning for it to become inactive indefinitely, and can result in an uninterruptible wait requiring a reset to recover from. Terminating a transfer is supposed to take effect immediately, but may result in data loss. To make this clear, rename the function to pl08x_terminate_phy_chan(). Also, make sure it is always consistently called - with the spinlock held and IRQs disabled, and ensure that the TC and ERR interrupt status is always cleared. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 32 ++++++++++++++++++-------------- 1 file changed, 18 insertions(+), 14 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 297f48b0cba..8321a3997c9 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -267,19 +267,24 @@ static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch) } -/* Stops the channel */ -static void pl08x_stop_phy_chan(struct pl08x_phy_chan *ch) +/* + * pl08x_terminate_phy_chan() stops the channel, clears the FIFO and + * clears any pending interrupt status. This should not be used for + * an on-going transfer, but as a method of shutting down a channel + * (eg, when it's no longer used) or terminating a transfer. + */ +static void pl08x_terminate_phy_chan(struct pl08x_driver_data *pl08x, + struct pl08x_phy_chan *ch) { - u32 val; + u32 val = readl(ch->base + PL080_CH_CONFIG); - pl08x_pause_phy_chan(ch); + val &= ~(PL080_CONFIG_ENABLE | PL080_CONFIG_ERR_IRQ_MASK | + PL080_CONFIG_TC_IRQ_MASK); - /* Disable channel */ - val = readl(ch->base + PL080_CH_CONFIG); - val &= ~PL080_CONFIG_ENABLE; - val &= ~PL080_CONFIG_ERR_IRQ_MASK; - val &= ~PL080_CONFIG_TC_IRQ_MASK; writel(val, ch->base + PL080_CH_CONFIG); + + writel(1 << ch->id, pl08x->base + PL080_ERR_CLEAR); + writel(1 << ch->id, pl08x->base + PL080_TC_CLEAR); } static inline u32 get_bytes_in_cctl(u32 cctl) @@ -404,13 +409,12 @@ static inline void pl08x_put_phy_channel(struct pl08x_driver_data *pl08x, { unsigned long flags; + spin_lock_irqsave(&ch->lock, flags); + /* Stop the channel and clear its interrupts */ - pl08x_stop_phy_chan(ch); - writel((1 << ch->id), pl08x->base + PL080_ERR_CLEAR); - writel((1 << ch->id), pl08x->base + PL080_TC_CLEAR); + pl08x_terminate_phy_chan(pl08x, ch); /* Mark it as free */ - spin_lock_irqsave(&ch->lock, flags); ch->serving = NULL; spin_unlock_irqrestore(&ch->lock, flags); } @@ -1449,7 +1453,7 @@ static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, plchan->state = PL08X_CHAN_IDLE; if (plchan->phychan) { - pl08x_stop_phy_chan(plchan->phychan); + pl08x_terminate_phy_chan(pl08x, plchan->phychan); /* * Mark physical channel as free and free any slave -- cgit v1.2.3-18-g5258 From 8179661694595eb3a4f2ff9bb0b73acbb7d2f4a9 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Thu, 27 Jan 2011 12:37:44 +0000 Subject: DMA: PL08x: fix channel pausing to timeout rather than lockup If a transfer is initiated from memory to a peripheral, then data is fetched and the channel is marked busy. This busy status persists until the HALT bit is set and the queued data has been transfered to the peripheral. Waiting indefinitely after setting the HALT bit results in system lockups. Timeout this operation, and print an error when this happens. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 8321a3997c9..07bca4970e5 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -79,6 +79,7 @@ #include #include #include +#include #include #include #include @@ -235,16 +236,19 @@ static void pl08x_start_txd(struct pl08x_dma_chan *plchan, } /* - * Overall DMAC remains enabled always. + * Pause the channel by setting the HALT bit. * - * Disabling individual channels could lose data. + * For M->P transfers, pause the DMAC first and then stop the peripheral - + * the FIFO can only drain if the peripheral is still requesting data. + * (note: this can still timeout if the DMAC FIFO never drains of data.) * - * Disable the peripheral DMA after disabling the DMAC in order to allow - * the DMAC FIFO to drain, and hence allow the channel to show inactive + * For P->M transfers, disable the peripheral first to stop it filling + * the DMAC FIFO, and then pause the DMAC. */ static void pl08x_pause_phy_chan(struct pl08x_phy_chan *ch) { u32 val; + int timeout; /* Set the HALT bit and wait for the FIFO to drain */ val = readl(ch->base + PL080_CH_CONFIG); @@ -252,8 +256,13 @@ static void pl08x_pause_phy_chan(struct pl08x_phy_chan *ch) writel(val, ch->base + PL080_CH_CONFIG); /* Wait for channel inactive */ - while (pl08x_phy_channel_busy(ch)) - cpu_relax(); + for (timeout = 1000; timeout; timeout--) { + if (!pl08x_phy_channel_busy(ch)) + break; + udelay(1); + } + if (pl08x_phy_channel_busy(ch)) + pr_err("pl08x: channel%u timeout waiting for pause\n", ch->id); } static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch) -- cgit v1.2.3-18-g5258 From 81a3516c4c127a75cc69f03d2a858f55a56eda1e Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Sun, 30 Jan 2011 04:14:48 +0000 Subject: bnx2x: Remove setting XAUI low-power for BCM8073 A rare link issue with the BCM8073 PHY may occur due to setting XAUI low power mode, while the PHY microcode already does that. The fix is not to set set XAUI low power mode for this PHY. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_link.c | 44 ------------------------------------------ 1 file changed, 44 deletions(-) diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index 7160ec51093..53a95a2c5e0 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -3948,48 +3948,6 @@ static u8 bnx2x_8073_8727_external_rom_boot(struct bnx2x *bp, return rc; } -static void bnx2x_8073_set_xaui_low_power_mode(struct bnx2x *bp, - struct bnx2x_phy *phy) -{ - u16 val; - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, MDIO_PMA_REG_8073_CHIP_REV, &val); - - if (val == 0) { - /* Mustn't set low power mode in 8073 A0 */ - return; - } - - /* Disable PLL sequencer (use read-modify-write to clear bit 13) */ - bnx2x_cl45_read(bp, phy, - MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, &val); - val &= ~(1<<13); - bnx2x_cl45_write(bp, phy, - MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, val); - - /* PLL controls */ - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x805E, 0x1077); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x805D, 0x0000); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x805C, 0x030B); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x805B, 0x1240); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x805A, 0x2490); - - /* Tx Controls */ - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80A7, 0x0C74); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80A6, 0x9041); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80A5, 0x4640); - - /* Rx Controls */ - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80FE, 0x01C4); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80FD, 0x9249); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80FC, 0x2015); - - /* Enable PLL sequencer (use read-modify-write to set bit 13) */ - bnx2x_cl45_read(bp, phy, MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, &val); - val |= (1<<13); - bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, val); -} - /******************************************************************/ /* BCM8073 PHY SECTION */ /******************************************************************/ @@ -4148,8 +4106,6 @@ static u8 bnx2x_8073_config_init(struct bnx2x_phy *phy, bnx2x_8073_set_pause_cl37(params, phy, vars); - bnx2x_8073_set_xaui_low_power_mode(bp, phy); - bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_M8051_MSGOUT_REG, &tmp1); -- cgit v1.2.3-18-g5258 From 53eda06def26862c0a3c57348c71a240429fbaac Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Sun, 30 Jan 2011 04:14:55 +0000 Subject: bnx2x: Fix LED blink rate on BCM84823 Fix blink rate of activity LED of the BCM84823 on 10G link Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_link.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index 53a95a2c5e0..b1c667a0031 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -6475,6 +6475,18 @@ static void bnx2x_848xx_set_link_led(struct bnx2x_phy *phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LED1_MASK, 0x80); + + /* Tell LED3 to blink on source */ + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LINK_SIGNAL, + &val); + val &= ~(7<<6); + val |= (1<<6); /* A83B[8:6]= 1 */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LINK_SIGNAL, + val); } break; } -- cgit v1.2.3-18-g5258 From c8e64df48a814be1e7066f07b4f709ff63727abf Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Sun, 30 Jan 2011 04:15:00 +0000 Subject: bnx2x: Fix port swap for BCM8073 Fix link on BCM57712 + BCM8073 when port swap is enabled. Common PHY reset was done on the wrong port. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_link.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index b1c667a0031..dd1210fddff 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -7688,10 +7688,13 @@ static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, struct bnx2x_phy phy[PORT_MAX]; struct bnx2x_phy *phy_blk[PORT_MAX]; u16 val; - s8 port; + s8 port = 0; s8 port_of_path = 0; - - bnx2x_ext_phy_hw_reset(bp, 0); + u32 swap_val, swap_override; + swap_val = REG_RD(bp, NIG_REG_PORT_SWAP); + swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE); + port ^= (swap_val && swap_override); + bnx2x_ext_phy_hw_reset(bp, port); /* PART1 - Reset both phys */ for (port = PORT_MAX - 1; port >= PORT_0; port--) { u32 shmem_base, shmem2_base; -- cgit v1.2.3-18-g5258 From 5866df6d07cf22749557a0804253c8fee9e87f06 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Sun, 30 Jan 2011 04:15:07 +0000 Subject: bnx2x: Fix potential link loss in multi-function mode All functions on a port should be set to take the MDC/MDIO lock to avoid contention on the bus Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_main.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c index 8cdcf5b39d1..404d93e6df2 100644 --- a/drivers/net/bnx2x/bnx2x_main.c +++ b/drivers/net/bnx2x/bnx2x_main.c @@ -5296,10 +5296,6 @@ static int bnx2x_init_hw_common(struct bnx2x *bp, u32 load_code) } } - bp->port.need_hw_lock = bnx2x_hw_lock_required(bp, - bp->common.shmem_base, - bp->common.shmem2_base); - bnx2x_setup_fan_failure_detection(bp); /* clear PXP2 attentions */ @@ -5503,9 +5499,6 @@ static int bnx2x_init_hw_port(struct bnx2x *bp) bnx2x_init_block(bp, MCP_BLOCK, init_stage); bnx2x_init_block(bp, DMAE_BLOCK, init_stage); - bp->port.need_hw_lock = bnx2x_hw_lock_required(bp, - bp->common.shmem_base, - bp->common.shmem2_base); if (bnx2x_fan_failure_det_req(bp, bp->common.shmem_base, bp->common.shmem2_base, port)) { u32 reg_addr = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 : @@ -8379,6 +8372,17 @@ static void __devinit bnx2x_get_port_hwinfo(struct bnx2x *bp) (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN)) bp->mdio.prtad = XGXS_EXT_PHY_ADDR(ext_phy_config); + + /* + * Check if hw lock is required to access MDC/MDIO bus to the PHY(s) + * In MF mode, it is set to cover self test cases + */ + if (IS_MF(bp)) + bp->port.need_hw_lock = 1; + else + bp->port.need_hw_lock = bnx2x_hw_lock_required(bp, + bp->common.shmem_base, + bp->common.shmem2_base); } static void __devinit bnx2x_get_mac_hwinfo(struct bnx2x *bp) -- cgit v1.2.3-18-g5258 From c4c93106741bbf61ecd05a2a835af8e3bf31c1bd Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Sun, 30 Jan 2011 04:15:13 +0000 Subject: bnx2x: Update bnx2x version to 1.62.00-5 Update bnx2x version to 1.62.00-5 Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h index 8e4183717d9..653c62475cb 100644 --- a/drivers/net/bnx2x/bnx2x.h +++ b/drivers/net/bnx2x/bnx2x.h @@ -22,8 +22,8 @@ * (you will need to reboot afterwards) */ /* #define BNX2X_STOP_ON_ERROR */ -#define DRV_MODULE_VERSION "1.62.00-4" -#define DRV_MODULE_RELDATE "2011/01/18" +#define DRV_MODULE_VERSION "1.62.00-5" +#define DRV_MODULE_RELDATE "2011/01/30" #define BNX2X_BC_VER 0x040200 #define BNX2X_MULTI_QUEUE -- cgit v1.2.3-18-g5258 From d524dac9279b6a41ffdf7ff7958c577f2e387db6 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Wed, 26 Jan 2011 10:10:40 -0700 Subject: dt: Move device tree documentation out of powerpc directory The device tree is used by more than just PowerPC. Make the documentation directory available to all. v2: reorganized files while moving to create arch and driver specific directories. Signed-off-by: Grant Likely Acked-by: Josh Boyer --- Documentation/devicetree/bindings/ata/fsl-sata.txt | 29 + Documentation/devicetree/bindings/eeprom.txt | 28 + .../devicetree/bindings/gpio/8xxx_gpio.txt | 60 + Documentation/devicetree/bindings/gpio/gpio.txt | 50 + Documentation/devicetree/bindings/gpio/led.txt | 58 + Documentation/devicetree/bindings/i2c/fsl-i2c.txt | 64 + Documentation/devicetree/bindings/marvell.txt | 521 +++++++ .../devicetree/bindings/mmc/fsl-esdhc.txt | 29 + .../devicetree/bindings/mmc/mmc-spi-slot.txt | 23 + .../devicetree/bindings/mtd/fsl-upm-nand.txt | 63 + .../devicetree/bindings/mtd/mtd-physmap.txt | 90 ++ .../devicetree/bindings/net/can/mpc5xxx-mscan.txt | 53 + .../devicetree/bindings/net/can/sja1000.txt | 53 + .../devicetree/bindings/net/fsl-tsec-phy.txt | 76 + .../devicetree/bindings/net/mdio-gpio.txt | 19 + Documentation/devicetree/bindings/net/phy.txt | 25 + .../devicetree/bindings/pci/83xx-512x-pci.txt | 40 + .../devicetree/bindings/powerpc/4xx/cpm.txt | 52 + .../devicetree/bindings/powerpc/4xx/emac.txt | 148 ++ .../devicetree/bindings/powerpc/4xx/ndfc.txt | 39 + .../bindings/powerpc/4xx/ppc440spe-adma.txt | 93 ++ .../devicetree/bindings/powerpc/4xx/reboot.txt | 18 + .../devicetree/bindings/powerpc/fsl/board.txt | 63 + .../devicetree/bindings/powerpc/fsl/cpm_qe/cpm.txt | 67 + .../bindings/powerpc/fsl/cpm_qe/cpm/brg.txt | 21 + .../bindings/powerpc/fsl/cpm_qe/cpm/i2c.txt | 41 + .../bindings/powerpc/fsl/cpm_qe/cpm/pic.txt | 18 + .../bindings/powerpc/fsl/cpm_qe/cpm/usb.txt | 15 + .../bindings/powerpc/fsl/cpm_qe/gpio.txt | 38 + .../bindings/powerpc/fsl/cpm_qe/network.txt | 45 + .../devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt | 115 ++ .../bindings/powerpc/fsl/cpm_qe/qe/firmware.txt | 24 + .../bindings/powerpc/fsl/cpm_qe/qe/par_io.txt | 51 + .../bindings/powerpc/fsl/cpm_qe/qe/pincfg.txt | 60 + .../bindings/powerpc/fsl/cpm_qe/qe/ucc.txt | 70 + .../bindings/powerpc/fsl/cpm_qe/qe/usb.txt | 37 + .../bindings/powerpc/fsl/cpm_qe/serial.txt | 32 + .../devicetree/bindings/powerpc/fsl/diu.txt | 34 + .../devicetree/bindings/powerpc/fsl/dma.txt | 144 ++ .../devicetree/bindings/powerpc/fsl/ecm.txt | 64 + .../devicetree/bindings/powerpc/fsl/gtm.txt | 31 + .../devicetree/bindings/powerpc/fsl/guts.txt | 25 + .../devicetree/bindings/powerpc/fsl/lbc.txt | 35 + .../devicetree/bindings/powerpc/fsl/mcm.txt | 64 + .../bindings/powerpc/fsl/mcu-mpc8349emitx.txt | 17 + .../bindings/powerpc/fsl/mpc5121-psc.txt | 70 + .../devicetree/bindings/powerpc/fsl/mpc5200.txt | 198 +++ .../devicetree/bindings/powerpc/fsl/mpic.txt | 42 + .../devicetree/bindings/powerpc/fsl/msi-pic.txt | 36 + .../devicetree/bindings/powerpc/fsl/pmc.txt | 63 + .../devicetree/bindings/powerpc/fsl/sec.txt | 68 + .../devicetree/bindings/powerpc/fsl/ssi.txt | 73 + .../bindings/powerpc/nintendo/gamecube.txt | 109 ++ .../devicetree/bindings/powerpc/nintendo/wii.txt | 184 +++ Documentation/devicetree/bindings/spi/fsl-spi.txt | 53 + Documentation/devicetree/bindings/spi/spi-bus.txt | 57 + Documentation/devicetree/bindings/usb/fsl-usb.txt | 81 ++ Documentation/devicetree/bindings/usb/usb-ehci.txt | 25 + Documentation/devicetree/bindings/xilinx.txt | 306 +++++ Documentation/devicetree/booting-without-of.txt | 1447 ++++++++++++++++++++ Documentation/powerpc/booting-without-of.txt | 1447 -------------------- Documentation/powerpc/dts-bindings/4xx/cpm.txt | 52 - Documentation/powerpc/dts-bindings/4xx/emac.txt | 148 -- Documentation/powerpc/dts-bindings/4xx/ndfc.txt | 39 - .../powerpc/dts-bindings/4xx/ppc440spe-adma.txt | 93 -- Documentation/powerpc/dts-bindings/4xx/reboot.txt | 18 - Documentation/powerpc/dts-bindings/can/sja1000.txt | 53 - Documentation/powerpc/dts-bindings/ecm.txt | 64 - Documentation/powerpc/dts-bindings/eeprom.txt | 28 - .../powerpc/dts-bindings/fsl/83xx-512x-pci.txt | 40 - .../powerpc/dts-bindings/fsl/8xxx_gpio.txt | 60 - Documentation/powerpc/dts-bindings/fsl/board.txt | 63 - Documentation/powerpc/dts-bindings/fsl/can.txt | 53 - .../powerpc/dts-bindings/fsl/cpm_qe/cpm.txt | 67 - .../powerpc/dts-bindings/fsl/cpm_qe/cpm/brg.txt | 21 - .../powerpc/dts-bindings/fsl/cpm_qe/cpm/i2c.txt | 41 - .../powerpc/dts-bindings/fsl/cpm_qe/cpm/pic.txt | 18 - .../powerpc/dts-bindings/fsl/cpm_qe/cpm/usb.txt | 15 - .../powerpc/dts-bindings/fsl/cpm_qe/gpio.txt | 38 - .../powerpc/dts-bindings/fsl/cpm_qe/network.txt | 45 - .../powerpc/dts-bindings/fsl/cpm_qe/qe.txt | 115 -- .../dts-bindings/fsl/cpm_qe/qe/firmware.txt | 24 - .../powerpc/dts-bindings/fsl/cpm_qe/qe/par_io.txt | 51 - .../powerpc/dts-bindings/fsl/cpm_qe/qe/pincfg.txt | 60 - .../powerpc/dts-bindings/fsl/cpm_qe/qe/ucc.txt | 70 - .../powerpc/dts-bindings/fsl/cpm_qe/qe/usb.txt | 37 - .../powerpc/dts-bindings/fsl/cpm_qe/serial.txt | 32 - Documentation/powerpc/dts-bindings/fsl/diu.txt | 34 - Documentation/powerpc/dts-bindings/fsl/dma.txt | 144 -- Documentation/powerpc/dts-bindings/fsl/esdhc.txt | 29 - Documentation/powerpc/dts-bindings/fsl/gtm.txt | 31 - Documentation/powerpc/dts-bindings/fsl/guts.txt | 25 - Documentation/powerpc/dts-bindings/fsl/i2c.txt | 64 - Documentation/powerpc/dts-bindings/fsl/lbc.txt | 35 - Documentation/powerpc/dts-bindings/fsl/mcm.txt | 64 - .../powerpc/dts-bindings/fsl/mcu-mpc8349emitx.txt | 17 - .../powerpc/dts-bindings/fsl/mpc5121-psc.txt | 70 - Documentation/powerpc/dts-bindings/fsl/mpc5200.txt | 198 --- Documentation/powerpc/dts-bindings/fsl/mpic.txt | 42 - Documentation/powerpc/dts-bindings/fsl/msi-pic.txt | 36 - Documentation/powerpc/dts-bindings/fsl/pmc.txt | 63 - Documentation/powerpc/dts-bindings/fsl/sata.txt | 29 - Documentation/powerpc/dts-bindings/fsl/sec.txt | 68 - Documentation/powerpc/dts-bindings/fsl/spi.txt | 53 - Documentation/powerpc/dts-bindings/fsl/ssi.txt | 73 - Documentation/powerpc/dts-bindings/fsl/tsec.txt | 76 - .../powerpc/dts-bindings/fsl/upm-nand.txt | 63 - Documentation/powerpc/dts-bindings/fsl/usb.txt | 81 -- Documentation/powerpc/dts-bindings/gpio/gpio.txt | 50 - Documentation/powerpc/dts-bindings/gpio/led.txt | 58 - Documentation/powerpc/dts-bindings/gpio/mdio.txt | 19 - Documentation/powerpc/dts-bindings/marvell.txt | 521 ------- .../powerpc/dts-bindings/mmc-spi-slot.txt | 23 - Documentation/powerpc/dts-bindings/mtd-physmap.txt | 90 -- .../powerpc/dts-bindings/nintendo/gamecube.txt | 109 -- .../powerpc/dts-bindings/nintendo/wii.txt | 184 --- Documentation/powerpc/dts-bindings/phy.txt | 25 - Documentation/powerpc/dts-bindings/spi-bus.txt | 57 - Documentation/powerpc/dts-bindings/usb-ehci.txt | 25 - Documentation/powerpc/dts-bindings/xilinx.txt | 306 ----- 120 files changed, 5554 insertions(+), 5554 deletions(-) create mode 100644 Documentation/devicetree/bindings/ata/fsl-sata.txt create mode 100644 Documentation/devicetree/bindings/eeprom.txt create mode 100644 Documentation/devicetree/bindings/gpio/8xxx_gpio.txt create mode 100644 Documentation/devicetree/bindings/gpio/gpio.txt create mode 100644 Documentation/devicetree/bindings/gpio/led.txt create mode 100644 Documentation/devicetree/bindings/i2c/fsl-i2c.txt create mode 100644 Documentation/devicetree/bindings/marvell.txt create mode 100644 Documentation/devicetree/bindings/mmc/fsl-esdhc.txt create mode 100644 Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt create mode 100644 Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt create mode 100644 Documentation/devicetree/bindings/mtd/mtd-physmap.txt create mode 100644 Documentation/devicetree/bindings/net/can/mpc5xxx-mscan.txt create mode 100644 Documentation/devicetree/bindings/net/can/sja1000.txt create mode 100644 Documentation/devicetree/bindings/net/fsl-tsec-phy.txt create mode 100644 Documentation/devicetree/bindings/net/mdio-gpio.txt create mode 100644 Documentation/devicetree/bindings/net/phy.txt create mode 100644 Documentation/devicetree/bindings/pci/83xx-512x-pci.txt create mode 100644 Documentation/devicetree/bindings/powerpc/4xx/cpm.txt create mode 100644 Documentation/devicetree/bindings/powerpc/4xx/emac.txt create mode 100644 Documentation/devicetree/bindings/powerpc/4xx/ndfc.txt create mode 100644 Documentation/devicetree/bindings/powerpc/4xx/ppc440spe-adma.txt create mode 100644 Documentation/devicetree/bindings/powerpc/4xx/reboot.txt create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/board.txt create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/cpm.txt create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/cpm/brg.txt create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/cpm/i2c.txt create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/cpm/pic.txt create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/cpm/usb.txt create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/gpio.txt create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/network.txt create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/firmware.txt create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/par_io.txt create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/pincfg.txt create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/ucc.txt create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/usb.txt create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/serial.txt create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/diu.txt create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/dma.txt create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/ecm.txt create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/gtm.txt create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/guts.txt create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/lbc.txt create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/mcm.txt create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/mpc5200.txt create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/mpic.txt create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/pmc.txt create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/sec.txt create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/ssi.txt create mode 100644 Documentation/devicetree/bindings/powerpc/nintendo/gamecube.txt create mode 100644 Documentation/devicetree/bindings/powerpc/nintendo/wii.txt create mode 100644 Documentation/devicetree/bindings/spi/fsl-spi.txt create mode 100644 Documentation/devicetree/bindings/spi/spi-bus.txt create mode 100644 Documentation/devicetree/bindings/usb/fsl-usb.txt create mode 100644 Documentation/devicetree/bindings/usb/usb-ehci.txt create mode 100644 Documentation/devicetree/bindings/xilinx.txt create mode 100644 Documentation/devicetree/booting-without-of.txt delete mode 100644 Documentation/powerpc/booting-without-of.txt delete mode 100644 Documentation/powerpc/dts-bindings/4xx/cpm.txt delete mode 100644 Documentation/powerpc/dts-bindings/4xx/emac.txt delete mode 100644 Documentation/powerpc/dts-bindings/4xx/ndfc.txt delete mode 100644 Documentation/powerpc/dts-bindings/4xx/ppc440spe-adma.txt delete mode 100644 Documentation/powerpc/dts-bindings/4xx/reboot.txt delete mode 100644 Documentation/powerpc/dts-bindings/can/sja1000.txt delete mode 100644 Documentation/powerpc/dts-bindings/ecm.txt delete mode 100644 Documentation/powerpc/dts-bindings/eeprom.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/83xx-512x-pci.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/8xxx_gpio.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/board.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/can.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/brg.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/i2c.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/pic.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/usb.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/cpm_qe/network.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/firmware.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/par_io.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/pincfg.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/ucc.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/usb.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/diu.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/dma.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/esdhc.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/gtm.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/guts.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/i2c.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/lbc.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/mcm.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/mcu-mpc8349emitx.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/mpc5121-psc.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/mpc5200.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/mpic.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/msi-pic.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/pmc.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/sata.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/sec.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/spi.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/ssi.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/tsec.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/upm-nand.txt delete mode 100644 Documentation/powerpc/dts-bindings/fsl/usb.txt delete mode 100644 Documentation/powerpc/dts-bindings/gpio/gpio.txt delete mode 100644 Documentation/powerpc/dts-bindings/gpio/led.txt delete mode 100644 Documentation/powerpc/dts-bindings/gpio/mdio.txt delete mode 100644 Documentation/powerpc/dts-bindings/marvell.txt delete mode 100644 Documentation/powerpc/dts-bindings/mmc-spi-slot.txt delete mode 100644 Documentation/powerpc/dts-bindings/mtd-physmap.txt delete mode 100644 Documentation/powerpc/dts-bindings/nintendo/gamecube.txt delete mode 100644 Documentation/powerpc/dts-bindings/nintendo/wii.txt delete mode 100644 Documentation/powerpc/dts-bindings/phy.txt delete mode 100644 Documentation/powerpc/dts-bindings/spi-bus.txt delete mode 100644 Documentation/powerpc/dts-bindings/usb-ehci.txt delete mode 100644 Documentation/powerpc/dts-bindings/xilinx.txt diff --git a/Documentation/devicetree/bindings/ata/fsl-sata.txt b/Documentation/devicetree/bindings/ata/fsl-sata.txt new file mode 100644 index 00000000000..b46bcf46c3d --- /dev/null +++ b/Documentation/devicetree/bindings/ata/fsl-sata.txt @@ -0,0 +1,29 @@ +* Freescale 8xxx/3.0 Gb/s SATA nodes + +SATA nodes are defined to describe on-chip Serial ATA controllers. +Each SATA port should have its own node. + +Required properties: +- compatible : compatible list, contains 2 entries, first is + "fsl,CHIP-sata", where CHIP is the processor + (mpc8315, mpc8379, etc.) and the second is + "fsl,pq-sata" +- interrupts : +- cell-index : controller index. + 1 for controller @ 0x18000 + 2 for controller @ 0x19000 + 3 for controller @ 0x1a000 + 4 for controller @ 0x1b000 + +Optional properties: +- interrupt-parent : optional, if needed for interrupt mapping +- reg : + +Example: + sata@18000 { + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; + reg = <0x18000 0x1000>; + cell-index = <1>; + interrupts = <2c 8>; + interrupt-parent = < &ipic >; + }; diff --git a/Documentation/devicetree/bindings/eeprom.txt b/Documentation/devicetree/bindings/eeprom.txt new file mode 100644 index 00000000000..4342c10de1b --- /dev/null +++ b/Documentation/devicetree/bindings/eeprom.txt @@ -0,0 +1,28 @@ +EEPROMs (I2C) + +Required properties: + + - compatible : should be "," + If there is no specific driver for , a generic + driver based on is selected. Possible types are: + 24c00, 24c01, 24c02, 24c04, 24c08, 24c16, 24c32, 24c64, + 24c128, 24c256, 24c512, 24c1024, spd + + - reg : the I2C address of the EEPROM + +Optional properties: + + - pagesize : the length of the pagesize for writing. Please consult the + manual of your device, that value varies a lot. A wrong value + may result in data loss! If not specified, a safety value of + '1' is used which will be very slow. + + - read-only: this parameterless property disables writes to the eeprom + +Example: + +eeprom@52 { + compatible = "atmel,24c32"; + reg = <0x52>; + pagesize = <32>; +}; diff --git a/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt b/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt new file mode 100644 index 00000000000..b0019eb5330 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt @@ -0,0 +1,60 @@ +GPIO controllers on MPC8xxx SoCs + +This is for the non-QE/CPM/GUTs GPIO controllers as found on +8349, 8572, 8610 and compatible. + +Every GPIO controller node must have #gpio-cells property defined, +this information will be used to translate gpio-specifiers. + +Required properties: +- compatible : "fsl,-gpio" followed by "fsl,mpc8349-gpio" for + 83xx, "fsl,mpc8572-gpio" for 85xx and "fsl,mpc8610-gpio" for 86xx. +- #gpio-cells : Should be two. The first cell is the pin number and the + second cell is used to specify optional parameters (currently unused). + - interrupts : Interrupt mapping for GPIO IRQ. + - interrupt-parent : Phandle for the interrupt controller that + services interrupts for this device. +- gpio-controller : Marks the port as GPIO controller. + +Example of gpio-controller nodes for a MPC8347 SoC: + + gpio1: gpio-controller@c00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio"; + reg = <0xc00 0x100>; + interrupts = <74 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + gpio2: gpio-controller@d00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio"; + reg = <0xd00 0x100>; + interrupts = <75 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + +See booting-without-of.txt for details of how to specify GPIO +information for devices. + +To use GPIO pins as interrupt sources for peripherals, specify the +GPIO controller as the interrupt parent and define GPIO number + +trigger mode using the interrupts property, which is defined like +this: + +interrupts = , where: + - number: GPIO pin (0..31) + - trigger: trigger mode: + 2 = trigger on falling edge + 3 = trigger on both edges + +Example of device using this is: + + funkyfpga@0 { + compatible = "funky-fpga"; + ... + interrupts = <4 3>; + interrupt-parent = <&gpio1>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt new file mode 100644 index 00000000000..edaa84d288a --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio.txt @@ -0,0 +1,50 @@ +Specifying GPIO information for devices +============================================ + +1) gpios property +----------------- + +Nodes that makes use of GPIOs should define them using `gpios' property, +format of which is: <&gpio-controller1-phandle gpio1-specifier + &gpio-controller2-phandle gpio2-specifier + 0 /* holes are permitted, means no GPIO 3 */ + &gpio-controller4-phandle gpio4-specifier + ...>; + +Note that gpio-specifier length is controller dependent. + +gpio-specifier may encode: bank, pin position inside the bank, +whether pin is open-drain and whether pin is logically inverted. + +Example of the node using GPIOs: + + node { + gpios = <&qe_pio_e 18 0>; + }; + +In this example gpio-specifier is "18 0" and encodes GPIO pin number, +and empty GPIO flags as accepted by the "qe_pio_e" gpio-controller. + +2) gpio-controller nodes +------------------------ + +Every GPIO controller node must have #gpio-cells property defined, +this information will be used to translate gpio-specifiers. + +Example of two SOC GPIO banks defined as gpio-controller nodes: + + qe_pio_a: gpio-controller@1400 { + #gpio-cells = <2>; + compatible = "fsl,qe-pario-bank-a", "fsl,qe-pario-bank"; + reg = <0x1400 0x18>; + gpio-controller; + }; + + qe_pio_e: gpio-controller@1460 { + #gpio-cells = <2>; + compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank"; + reg = <0x1460 0x18>; + gpio-controller; + }; + + diff --git a/Documentation/devicetree/bindings/gpio/led.txt b/Documentation/devicetree/bindings/gpio/led.txt new file mode 100644 index 00000000000..064db928c3c --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/led.txt @@ -0,0 +1,58 @@ +LEDs connected to GPIO lines + +Required properties: +- compatible : should be "gpio-leds". + +Each LED is represented as a sub-node of the gpio-leds device. Each +node's name represents the name of the corresponding LED. + +LED sub-node properties: +- gpios : Should specify the LED's GPIO, see "Specifying GPIO information + for devices" in Documentation/powerpc/booting-without-of.txt. Active + low LEDs should be indicated using flags in the GPIO specifier. +- label : (optional) The label for this LED. If omitted, the label is + taken from the node name (excluding the unit address). +- linux,default-trigger : (optional) This parameter, if present, is a + string defining the trigger assigned to the LED. Current triggers are: + "backlight" - LED will act as a back-light, controlled by the framebuffer + system + "default-on" - LED will turn on, but see "default-state" below + "heartbeat" - LED "double" flashes at a load average based rate + "ide-disk" - LED indicates disk activity + "timer" - LED flashes at a fixed, configurable rate +- default-state: (optional) The initial state of the LED. Valid + values are "on", "off", and "keep". If the LED is already on or off + and the default-state property is set the to same value, then no + glitch should be produced where the LED momentarily turns off (or + on). The "keep" setting will keep the LED at whatever its current + state is, without producing a glitch. The default is off if this + property is not present. + +Examples: + +leds { + compatible = "gpio-leds"; + hdd { + label = "IDE Activity"; + gpios = <&mcu_pio 0 1>; /* Active low */ + linux,default-trigger = "ide-disk"; + }; + + fault { + gpios = <&mcu_pio 1 0>; + /* Keep LED on if BIOS detected hardware fault */ + default-state = "keep"; + }; +}; + +run-control { + compatible = "gpio-leds"; + red { + gpios = <&mpc8572 6 0>; + default-state = "off"; + }; + green { + gpios = <&mpc8572 7 0>; + default-state = "on"; + }; +} diff --git a/Documentation/devicetree/bindings/i2c/fsl-i2c.txt b/Documentation/devicetree/bindings/i2c/fsl-i2c.txt new file mode 100644 index 00000000000..1eacd6b20ed --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/fsl-i2c.txt @@ -0,0 +1,64 @@ +* I2C + +Required properties : + + - reg : Offset and length of the register set for the device + - compatible : should be "fsl,CHIP-i2c" where CHIP is the name of a + compatible processor, e.g. mpc8313, mpc8543, mpc8544, mpc5121, + mpc5200 or mpc5200b. For the mpc5121, an additional node + "fsl,mpc5121-i2c-ctrl" is required as shown in the example below. + +Recommended properties : + + - interrupts : where a is the interrupt number and b is a + field that represents an encoding of the sense and level + information for the interrupt. This should be encoded based on + the information in section 2) depending on the type of interrupt + controller you have. + - interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. + - fsl,preserve-clocking : boolean; if defined, the clock settings + from the bootloader are preserved (not touched). + - clock-frequency : desired I2C bus clock frequency in Hz. + - fsl,timeout : I2C bus timeout in microseconds. + +Examples : + + /* MPC5121 based board */ + i2c@1740 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c", "fsl-i2c"; + reg = <0x1740 0x20>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + clock-frequency = <100000>; + }; + + i2ccontrol@1760 { + compatible = "fsl,mpc5121-i2c-ctrl"; + reg = <0x1760 0x8>; + }; + + /* MPC5200B based board */ + i2c@3d00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d00 0x40>; + interrupts = <2 15 0>; + interrupt-parent = <&mpc5200_pic>; + fsl,preserve-clocking; + }; + + /* MPC8544 base board */ + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8544-i2c", "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + clock-frequency = <400000>; + fsl,timeout = <10000>; + }; diff --git a/Documentation/devicetree/bindings/marvell.txt b/Documentation/devicetree/bindings/marvell.txt new file mode 100644 index 00000000000..f1533d91953 --- /dev/null +++ b/Documentation/devicetree/bindings/marvell.txt @@ -0,0 +1,521 @@ +Marvell Discovery mv64[345]6x System Controller chips +=========================================================== + +The Marvell mv64[345]60 series of system controller chips contain +many of the peripherals needed to implement a complete computer +system. In this section, we define device tree nodes to describe +the system controller chip itself and each of the peripherals +which it contains. Compatible string values for each node are +prefixed with the string "marvell,", for Marvell Technology Group Ltd. + +1) The /system-controller node + + This node is used to represent the system-controller and must be + present when the system uses a system controller chip. The top-level + system-controller node contains information that is global to all + devices within the system controller chip. The node name begins + with "system-controller" followed by the unit address, which is + the base address of the memory-mapped register set for the system + controller chip. + + Required properties: + + - ranges : Describes the translation of system controller addresses + for memory mapped registers. + - clock-frequency: Contains the main clock frequency for the system + controller chip. + - reg : This property defines the address and size of the + memory-mapped registers contained within the system controller + chip. The address specified in the "reg" property should match + the unit address of the system-controller node. + - #address-cells : Address representation for system controller + devices. This field represents the number of cells needed to + represent the address of the memory-mapped registers of devices + within the system controller chip. + - #size-cells : Size representation for the memory-mapped + registers within the system controller chip. + - #interrupt-cells : Defines the width of cells used to represent + interrupts. + + Optional properties: + + - model : The specific model of the system controller chip. Such + as, "mv64360", "mv64460", or "mv64560". + - compatible : A string identifying the compatibility identifiers + of the system controller chip. + + The system-controller node contains child nodes for each system + controller device that the platform uses. Nodes should not be created + for devices which exist on the system controller chip but are not used + + Example Marvell Discovery mv64360 system-controller node: + + system-controller@f1000000 { /* Marvell Discovery mv64360 */ + #address-cells = <1>; + #size-cells = <1>; + model = "mv64360"; /* Default */ + compatible = "marvell,mv64360"; + clock-frequency = <133333333>; + reg = <0xf1000000 0x10000>; + virtual-reg = <0xf1000000>; + ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */ + 0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */ + 0xa0000000 0xa0000000 0x4000000 /* User FLASH */ + 0x00000000 0xf1000000 0x0010000 /* Bridge's regs */ + 0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */ + + [ child node definitions... ] + } + +2) Child nodes of /system-controller + + a) Marvell Discovery MDIO bus + + The MDIO is a bus to which the PHY devices are connected. For each + device that exists on this bus, a child node should be created. See + the definition of the PHY node below for an example of how to define + a PHY. + + Required properties: + - #address-cells : Should be <1> + - #size-cells : Should be <0> + - device_type : Should be "mdio" + - compatible : Should be "marvell,mv64360-mdio" + + Example: + + mdio { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "marvell,mv64360-mdio"; + + ethernet-phy@0 { + ...... + }; + }; + + + b) Marvell Discovery ethernet controller + + The Discover ethernet controller is described with two levels + of nodes. The first level describes an ethernet silicon block + and the second level describes up to 3 ethernet nodes within + that block. The reason for the multiple levels is that the + registers for the node are interleaved within a single set + of registers. The "ethernet-block" level describes the + shared register set, and the "ethernet" nodes describe ethernet + port-specific properties. + + Ethernet block node + + Required properties: + - #address-cells : <1> + - #size-cells : <0> + - compatible : "marvell,mv64360-eth-block" + - reg : Offset and length of the register set for this block + + Example Discovery Ethernet block node: + ethernet-block@2000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,mv64360-eth-block"; + reg = <0x2000 0x2000>; + ethernet@0 { + ....... + }; + }; + + Ethernet port node + + Required properties: + - device_type : Should be "network". + - compatible : Should be "marvell,mv64360-eth". + - reg : Should be <0>, <1>, or <2>, according to which registers + within the silicon block the device uses. + - interrupts : where a is the interrupt number for the port. + - interrupt-parent : the phandle for the interrupt controller + that services interrupts for this device. + - phy : the phandle for the PHY connected to this ethernet + controller. + - local-mac-address : 6 bytes, MAC address + + Example Discovery Ethernet port node: + ethernet@0 { + device_type = "network"; + compatible = "marvell,mv64360-eth"; + reg = <0>; + interrupts = <32>; + interrupt-parent = <&PIC>; + phy = <&PHY0>; + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + + + + c) Marvell Discovery PHY nodes + + Required properties: + - device_type : Should be "ethernet-phy" + - interrupts : where a is the interrupt number for this phy. + - interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. + - reg : The ID number for the phy, usually a small integer + + Example Discovery PHY node: + ethernet-phy@1 { + device_type = "ethernet-phy"; + compatible = "broadcom,bcm5421"; + interrupts = <76>; /* GPP 12 */ + interrupt-parent = <&PIC>; + reg = <1>; + }; + + + d) Marvell Discovery SDMA nodes + + Represent DMA hardware associated with the MPSC (multiprotocol + serial controllers). + + Required properties: + - compatible : "marvell,mv64360-sdma" + - reg : Offset and length of the register set for this device + - interrupts : where a is the interrupt number for the DMA + device. + - interrupt-parent : the phandle for the interrupt controller + that services interrupts for this device. + + Example Discovery SDMA node: + sdma@4000 { + compatible = "marvell,mv64360-sdma"; + reg = <0x4000 0xc18>; + virtual-reg = <0xf1004000>; + interrupts = <36>; + interrupt-parent = <&PIC>; + }; + + + e) Marvell Discovery BRG nodes + + Represent baud rate generator hardware associated with the MPSC + (multiprotocol serial controllers). + + Required properties: + - compatible : "marvell,mv64360-brg" + - reg : Offset and length of the register set for this device + - clock-src : A value from 0 to 15 which selects the clock + source for the baud rate generator. This value corresponds + to the CLKS value in the BRGx configuration register. See + the mv64x60 User's Manual. + - clock-frequence : The frequency (in Hz) of the baud rate + generator's input clock. + - current-speed : The current speed setting (presumably by + firmware) of the baud rate generator. + + Example Discovery BRG node: + brg@b200 { + compatible = "marvell,mv64360-brg"; + reg = <0xb200 0x8>; + clock-src = <8>; + clock-frequency = <133333333>; + current-speed = <9600>; + }; + + + f) Marvell Discovery CUNIT nodes + + Represent the Serial Communications Unit device hardware. + + Required properties: + - reg : Offset and length of the register set for this device + + Example Discovery CUNIT node: + cunit@f200 { + reg = <0xf200 0x200>; + }; + + + g) Marvell Discovery MPSCROUTING nodes + + Represent the Discovery's MPSC routing hardware + + Required properties: + - reg : Offset and length of the register set for this device + + Example Discovery CUNIT node: + mpscrouting@b500 { + reg = <0xb400 0xc>; + }; + + + h) Marvell Discovery MPSCINTR nodes + + Represent the Discovery's MPSC DMA interrupt hardware registers + (SDMA cause and mask registers). + + Required properties: + - reg : Offset and length of the register set for this device + + Example Discovery MPSCINTR node: + mpsintr@b800 { + reg = <0xb800 0x100>; + }; + + + i) Marvell Discovery MPSC nodes + + Represent the Discovery's MPSC (Multiprotocol Serial Controller) + serial port. + + Required properties: + - device_type : "serial" + - compatible : "marvell,mv64360-mpsc" + - reg : Offset and length of the register set for this device + - sdma : the phandle for the SDMA node used by this port + - brg : the phandle for the BRG node used by this port + - cunit : the phandle for the CUNIT node used by this port + - mpscrouting : the phandle for the MPSCROUTING node used by this port + - mpscintr : the phandle for the MPSCINTR node used by this port + - cell-index : the hardware index of this cell in the MPSC core + - max_idle : value needed for MPSC CHR3 (Maximum Frame Length) + register + - interrupts : where a is the interrupt number for the MPSC. + - interrupt-parent : the phandle for the interrupt controller + that services interrupts for this device. + + Example Discovery MPSCINTR node: + mpsc@8000 { + device_type = "serial"; + compatible = "marvell,mv64360-mpsc"; + reg = <0x8000 0x38>; + virtual-reg = <0xf1008000>; + sdma = <&SDMA0>; + brg = <&BRG0>; + cunit = <&CUNIT>; + mpscrouting = <&MPSCROUTING>; + mpscintr = <&MPSCINTR>; + cell-index = <0>; + max_idle = <40>; + interrupts = <40>; + interrupt-parent = <&PIC>; + }; + + + j) Marvell Discovery Watch Dog Timer nodes + + Represent the Discovery's watchdog timer hardware + + Required properties: + - compatible : "marvell,mv64360-wdt" + - reg : Offset and length of the register set for this device + + Example Discovery Watch Dog Timer node: + wdt@b410 { + compatible = "marvell,mv64360-wdt"; + reg = <0xb410 0x8>; + }; + + + k) Marvell Discovery I2C nodes + + Represent the Discovery's I2C hardware + + Required properties: + - device_type : "i2c" + - compatible : "marvell,mv64360-i2c" + - reg : Offset and length of the register set for this device + - interrupts : where a is the interrupt number for the I2C. + - interrupt-parent : the phandle for the interrupt controller + that services interrupts for this device. + + Example Discovery I2C node: + compatible = "marvell,mv64360-i2c"; + reg = <0xc000 0x20>; + virtual-reg = <0xf100c000>; + interrupts = <37>; + interrupt-parent = <&PIC>; + }; + + + l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes + + Represent the Discovery's PIC hardware + + Required properties: + - #interrupt-cells : <1> + - #address-cells : <0> + - compatible : "marvell,mv64360-pic" + - reg : Offset and length of the register set for this device + - interrupt-controller + + Example Discovery PIC node: + pic { + #interrupt-cells = <1>; + #address-cells = <0>; + compatible = "marvell,mv64360-pic"; + reg = <0x0 0x88>; + interrupt-controller; + }; + + + m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes + + Represent the Discovery's MPP hardware + + Required properties: + - compatible : "marvell,mv64360-mpp" + - reg : Offset and length of the register set for this device + + Example Discovery MPP node: + mpp@f000 { + compatible = "marvell,mv64360-mpp"; + reg = <0xf000 0x10>; + }; + + + n) Marvell Discovery GPP (General Purpose Pins) nodes + + Represent the Discovery's GPP hardware + + Required properties: + - compatible : "marvell,mv64360-gpp" + - reg : Offset and length of the register set for this device + + Example Discovery GPP node: + gpp@f000 { + compatible = "marvell,mv64360-gpp"; + reg = <0xf100 0x20>; + }; + + + o) Marvell Discovery PCI host bridge node + + Represents the Discovery's PCI host bridge device. The properties + for this node conform to Rev 2.1 of the PCI Bus Binding to IEEE + 1275-1994. A typical value for the compatible property is + "marvell,mv64360-pci". + + Example Discovery PCI host bridge node + pci@80000000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "marvell,mv64360-pci"; + reg = <0xcf8 0x8>; + ranges = <0x01000000 0x0 0x0 + 0x88000000 0x0 0x01000000 + 0x02000000 0x0 0x80000000 + 0x80000000 0x0 0x08000000>; + bus-range = <0 255>; + clock-frequency = <66000000>; + interrupt-parent = <&PIC>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0a */ + 0x5000 0 0 1 &PIC 80 + 0x5000 0 0 2 &PIC 81 + 0x5000 0 0 3 &PIC 91 + 0x5000 0 0 4 &PIC 93 + + /* IDSEL 0x0b */ + 0x5800 0 0 1 &PIC 91 + 0x5800 0 0 2 &PIC 93 + 0x5800 0 0 3 &PIC 80 + 0x5800 0 0 4 &PIC 81 + + /* IDSEL 0x0c */ + 0x6000 0 0 1 &PIC 91 + 0x6000 0 0 2 &PIC 93 + 0x6000 0 0 3 &PIC 80 + 0x6000 0 0 4 &PIC 81 + + /* IDSEL 0x0d */ + 0x6800 0 0 1 &PIC 93 + 0x6800 0 0 2 &PIC 80 + 0x6800 0 0 3 &PIC 81 + 0x6800 0 0 4 &PIC 91 + >; + }; + + + p) Marvell Discovery CPU Error nodes + + Represent the Discovery's CPU error handler device. + + Required properties: + - compatible : "marvell,mv64360-cpu-error" + - reg : Offset and length of the register set for this device + - interrupts : the interrupt number for this device + - interrupt-parent : the phandle for the interrupt controller + that services interrupts for this device. + + Example Discovery CPU Error node: + cpu-error@0070 { + compatible = "marvell,mv64360-cpu-error"; + reg = <0x70 0x10 0x128 0x28>; + interrupts = <3>; + interrupt-parent = <&PIC>; + }; + + + q) Marvell Discovery SRAM Controller nodes + + Represent the Discovery's SRAM controller device. + + Required properties: + - compatible : "marvell,mv64360-sram-ctrl" + - reg : Offset and length of the register set for this device + - interrupts : the interrupt number for this device + - interrupt-parent : the phandle for the interrupt controller + that services interrupts for this device. + + Example Discovery SRAM Controller node: + sram-ctrl@0380 { + compatible = "marvell,mv64360-sram-ctrl"; + reg = <0x380 0x80>; + interrupts = <13>; + interrupt-parent = <&PIC>; + }; + + + r) Marvell Discovery PCI Error Handler nodes + + Represent the Discovery's PCI error handler device. + + Required properties: + - compatible : "marvell,mv64360-pci-error" + - reg : Offset and length of the register set for this device + - interrupts : the interrupt number for this device + - interrupt-parent : the phandle for the interrupt controller + that services interrupts for this device. + + Example Discovery PCI Error Handler node: + pci-error@1d40 { + compatible = "marvell,mv64360-pci-error"; + reg = <0x1d40 0x40 0xc28 0x4>; + interrupts = <12>; + interrupt-parent = <&PIC>; + }; + + + s) Marvell Discovery Memory Controller nodes + + Represent the Discovery's memory controller device. + + Required properties: + - compatible : "marvell,mv64360-mem-ctrl" + - reg : Offset and length of the register set for this device + - interrupts : the interrupt number for this device + - interrupt-parent : the phandle for the interrupt controller + that services interrupts for this device. + + Example Discovery Memory Controller node: + mem-ctrl@1400 { + compatible = "marvell,mv64360-mem-ctrl"; + reg = <0x1400 0x60>; + interrupts = <17>; + interrupt-parent = <&PIC>; + }; + + diff --git a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt new file mode 100644 index 00000000000..64bcb8be973 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt @@ -0,0 +1,29 @@ +* Freescale Enhanced Secure Digital Host Controller (eSDHC) + +The Enhanced Secure Digital Host Controller provides an interface +for MMC, SD, and SDIO types of memory cards. + +Required properties: + - compatible : should be + "fsl,-esdhc", "fsl,esdhc" + - reg : should contain eSDHC registers location and length. + - interrupts : should contain eSDHC interrupt. + - interrupt-parent : interrupt source phandle. + - clock-frequency : specifies eSDHC base clock frequency. + - sdhci,wp-inverted : (optional) specifies that eSDHC controller + reports inverted write-protect state; + - sdhci,1-bit-only : (optional) specifies that a controller can + only handle 1-bit data transfers. + - sdhci,auto-cmd12: (optional) specifies that a controller can + only handle auto CMD12. + +Example: + +sdhci@2e000 { + compatible = "fsl,mpc8378-esdhc", "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; + /* Filled in by U-Boot */ + clock-frequency = <0>; +}; diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt new file mode 100644 index 00000000000..c39ac289195 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt @@ -0,0 +1,23 @@ +MMC/SD/SDIO slot directly connected to a SPI bus + +Required properties: +- compatible : should be "mmc-spi-slot". +- reg : should specify SPI address (chip-select number). +- spi-max-frequency : maximum frequency for this device (Hz). +- voltage-ranges : two cells are required, first cell specifies minimum + slot voltage (mV), second cell specifies maximum slot voltage (mV). + Several ranges could be specified. +- gpios : (optional) may specify GPIOs in this order: Card-Detect GPIO, + Write-Protect GPIO. + +Example: + + mmc-slot@0 { + compatible = "fsl,mpc8323rdb-mmc-slot", + "mmc-spi-slot"; + reg = <0>; + gpios = <&qe_pio_d 14 1 + &qe_pio_d 15 0>; + voltage-ranges = <3300 3300>; + spi-max-frequency = <50000000>; + }; diff --git a/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt b/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt new file mode 100644 index 00000000000..a48b2cadc7f --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt @@ -0,0 +1,63 @@ +Freescale Localbus UPM programmed to work with NAND flash + +Required properties: +- compatible : "fsl,upm-nand". +- reg : should specify localbus chip select and size used for the chip. +- fsl,upm-addr-offset : UPM pattern offset for the address latch. +- fsl,upm-cmd-offset : UPM pattern offset for the command latch. + +Optional properties: +- fsl,upm-wait-flags : add chip-dependent short delays after running the + UPM pattern (0x1), after writing a data byte (0x2) or after + writing out a buffer (0x4). +- fsl,upm-addr-line-cs-offsets : address offsets for multi-chip support. + The corresponding address lines are used to select the chip. +- gpios : may specify optional GPIOs connected to the Ready-Not-Busy pins + (R/B#). For multi-chip devices, "n" GPIO definitions are required + according to the number of chips. +- chip-delay : chip dependent delay for transfering data from array to + read registers (tR). Required if property "gpios" is not used + (R/B# pins not connected). + +Examples: + +upm@1,0 { + compatible = "fsl,upm-nand"; + reg = <1 0 1>; + fsl,upm-addr-offset = <16>; + fsl,upm-cmd-offset = <8>; + gpios = <&qe_pio_e 18 0>; + + flash { + #address-cells = <1>; + #size-cells = <1>; + compatible = "..."; + + partition@0 { + ... + }; + }; +}; + +upm@3,0 { + #address-cells = <0>; + #size-cells = <0>; + compatible = "tqc,tqm8548-upm-nand", "fsl,upm-nand"; + reg = <3 0x0 0x800>; + fsl,upm-addr-offset = <0x10>; + fsl,upm-cmd-offset = <0x08>; + /* Multi-chip NAND device */ + fsl,upm-addr-line-cs-offsets = <0x0 0x200>; + fsl,upm-wait-flags = <0x5>; + chip-delay = <25>; // in micro-seconds + + nand@0 { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "fs"; + reg = <0x00000000 0x10000000>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.txt b/Documentation/devicetree/bindings/mtd/mtd-physmap.txt new file mode 100644 index 00000000000..80152cb567d --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.txt @@ -0,0 +1,90 @@ +CFI or JEDEC memory-mapped NOR flash, MTD-RAM (NVRAM...) + +Flash chips (Memory Technology Devices) are often used for solid state +file systems on embedded devices. + + - compatible : should contain the specific model of mtd chip(s) + used, if known, followed by either "cfi-flash", "jedec-flash" + or "mtd-ram". + - reg : Address range(s) of the mtd chip(s) + It's possible to (optionally) define multiple "reg" tuples so that + non-identical chips can be described in one node. + - bank-width : Width (in bytes) of the bank. Equal to the + device width times the number of interleaved chips. + - device-width : (optional) Width of a single mtd chip. If + omitted, assumed to be equal to 'bank-width'. + - #address-cells, #size-cells : Must be present if the device has + sub-nodes representing partitions (see below). In this case + both #address-cells and #size-cells must be equal to 1. + +For JEDEC compatible devices, the following additional properties +are defined: + + - vendor-id : Contains the flash chip's vendor id (1 byte). + - device-id : Contains the flash chip's device id (1 byte). + +In addition to the information on the mtd bank itself, the +device tree may optionally contain additional information +describing partitions of the address space. This can be +used on platforms which have strong conventions about which +portions of a flash are used for what purposes, but which don't +use an on-flash partition table such as RedBoot. + +Each partition is represented as a sub-node of the mtd device. +Each node's name represents the name of the corresponding +partition of the mtd device. + +Flash partitions + - reg : The partition's offset and size within the mtd bank. + - label : (optional) The label / name for this partition. + If omitted, the label is taken from the node name (excluding + the unit address). + - read-only : (optional) This parameter, if present, is a hint to + Linux that this partition should only be mounted + read-only. This is usually used for flash partitions + containing early-boot firmware images or data which should not + be clobbered. + +Example: + + flash@ff000000 { + compatible = "amd,am29lv128ml", "cfi-flash"; + reg = ; + bank-width = <4>; + device-width = <1>; + #address-cells = <1>; + #size-cells = <1>; + fs@0 { + label = "fs"; + reg = <0 f80000>; + }; + firmware@f80000 { + label ="firmware"; + reg = ; + read-only; + }; + }; + +Here an example with multiple "reg" tuples: + + flash@f0000000,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "intel,PC48F4400P0VB", "cfi-flash"; + reg = <0 0x00000000 0x02000000 + 0 0x02000000 0x02000000>; + bank-width = <2>; + partition@0 { + label = "test-part1"; + reg = <0 0x04000000>; + }; + }; + +An example using SRAM: + + sram@2,0 { + compatible = "samsung,k6f1616u6a", "mtd-ram"; + reg = <2 0 0x00200000>; + bank-width = <2>; + }; + diff --git a/Documentation/devicetree/bindings/net/can/mpc5xxx-mscan.txt b/Documentation/devicetree/bindings/net/can/mpc5xxx-mscan.txt new file mode 100644 index 00000000000..2fa4fcd38fd --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/mpc5xxx-mscan.txt @@ -0,0 +1,53 @@ +CAN Device Tree Bindings +------------------------ + +(c) 2006-2009 Secret Lab Technologies Ltd +Grant Likely + +fsl,mpc5200-mscan nodes +----------------------- +In addition to the required compatible-, reg- and interrupt-properties, you can +also specify which clock source shall be used for the controller: + +- fsl,mscan-clock-source : a string describing the clock source. Valid values + are: "ip" for ip bus clock + "ref" for reference clock (XTAL) + "ref" is default in case this property is not + present. + +fsl,mpc5121-mscan nodes +----------------------- +In addition to the required compatible-, reg- and interrupt-properties, you can +also specify which clock source and divider shall be used for the controller: + +- fsl,mscan-clock-source : a string describing the clock source. Valid values + are: "ip" for ip bus clock + "ref" for reference clock + "sys" for system clock + If this property is not present, an optimal CAN + clock source and frequency based on the system + clock will be selected. If this is not possible, + the reference clock will be used. + +- fsl,mscan-clock-divider: for the reference and system clock, an additional + clock divider can be specified. By default, a + value of 1 is used. + +Note that the MPC5121 Rev. 1 processor is not supported. + +Examples: + can@1300 { + compatible = "fsl,mpc5121-mscan"; + interrupts = <12 0x8>; + interrupt-parent = <&ipic>; + reg = <0x1300 0x80>; + }; + + can@1380 { + compatible = "fsl,mpc5121-mscan"; + interrupts = <13 0x8>; + interrupt-parent = <&ipic>; + reg = <0x1380 0x80>; + fsl,mscan-clock-source = "ref"; + fsl,mscan-clock-divider = <3>; + }; diff --git a/Documentation/devicetree/bindings/net/can/sja1000.txt b/Documentation/devicetree/bindings/net/can/sja1000.txt new file mode 100644 index 00000000000..d6d209ded93 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/sja1000.txt @@ -0,0 +1,53 @@ +Memory mapped SJA1000 CAN controller from NXP (formerly Philips) + +Required properties: + +- compatible : should be "nxp,sja1000". + +- reg : should specify the chip select, address offset and size required + to map the registers of the SJA1000. The size is usually 0x80. + +- interrupts: property with a value describing the interrupt source + (number and sensitivity) required for the SJA1000. + +Optional properties: + +- nxp,external-clock-frequency : Frequency of the external oscillator + clock in Hz. Note that the internal clock frequency used by the + SJA1000 is half of that value. If not specified, a default value + of 16000000 (16 MHz) is used. + +- nxp,tx-output-mode : operation mode of the TX output control logic: + <0x0> : bi-phase output mode + <0x1> : normal output mode (default) + <0x2> : test output mode + <0x3> : clock output mode + +- nxp,tx-output-config : TX output pin configuration: + <0x01> : TX0 invert + <0x02> : TX0 pull-down (default) + <0x04> : TX0 pull-up + <0x06> : TX0 push-pull + <0x08> : TX1 invert + <0x10> : TX1 pull-down + <0x20> : TX1 pull-up + <0x30> : TX1 push-pull + +- nxp,clock-out-frequency : clock frequency in Hz on the CLKOUT pin. + If not specified or if the specified value is 0, the CLKOUT pin + will be disabled. + +- nxp,no-comparator-bypass : Allows to disable the CAN input comperator. + +For futher information, please have a look to the SJA1000 data sheet. + +Examples: + +can@3,100 { + compatible = "nxp,sja1000"; + reg = <3 0x100 0x80>; + interrupts = <2 0>; + interrupt-parent = <&mpic>; + nxp,external-clock-frequency = <16000000>; +}; + diff --git a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt new file mode 100644 index 00000000000..edb7ae19e86 --- /dev/null +++ b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt @@ -0,0 +1,76 @@ +* MDIO IO device + +The MDIO is a bus to which the PHY devices are connected. For each +device that exists on this bus, a child node should be created. See +the definition of the PHY node in booting-without-of.txt for an example +of how to define a PHY. + +Required properties: + - reg : Offset and length of the register set for the device + - compatible : Should define the compatible device type for the + mdio. Currently, this is most likely to be "fsl,gianfar-mdio" + +Example: + + mdio@24520 { + reg = <24520 20>; + compatible = "fsl,gianfar-mdio"; + + ethernet-phy@0 { + ...... + }; + }; + +* TBI Internal MDIO bus + +As of this writing, every tsec is associated with an internal TBI PHY. +This PHY is accessed through the local MDIO bus. These buses are defined +similarly to the mdio buses, except they are compatible with "fsl,gianfar-tbi". +The TBI PHYs underneath them are similar to normal PHYs, but the reg property +is considered instructive, rather than descriptive. The reg property should +be chosen so it doesn't interfere with other PHYs on the bus. + +* Gianfar-compatible ethernet nodes + +Properties: + + - device_type : Should be "network" + - model : Model of the device. Can be "TSEC", "eTSEC", or "FEC" + - compatible : Should be "gianfar" + - reg : Offset and length of the register set for the device + - local-mac-address : List of bytes representing the ethernet address of + this controller + - interrupts : For FEC devices, the first interrupt is the device's + interrupt. For TSEC and eTSEC devices, the first interrupt is + transmit, the second is receive, and the third is error. + - phy-handle : The phandle for the PHY connected to this ethernet + controller. + - fixed-link : where a is emulated phy id - choose any, + but unique to the all specified fixed-links, b is duplex - 0 half, + 1 full, c is link speed - d#10/d#100/d#1000, d is pause - 0 no + pause, 1 pause, e is asym_pause - 0 no asym_pause, 1 asym_pause. + - phy-connection-type : a string naming the controller/PHY interface type, + i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id", "sgmii", + "tbi", or "rtbi". This property is only really needed if the connection + is of type "rgmii-id", as all other connection types are detected by + hardware. + - fsl,magic-packet : If present, indicates that the hardware supports + waking up via magic packet. + - bd-stash : If present, indicates that the hardware supports stashing + buffer descriptors in the L2. + - rx-stash-len : Denotes the number of bytes of a received buffer to stash + in the L2. + - rx-stash-idx : Denotes the index of the first byte from the received + buffer to stash in the L2. + +Example: + ethernet@24000 { + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 E0 0C 00 73 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy0> + }; diff --git a/Documentation/devicetree/bindings/net/mdio-gpio.txt b/Documentation/devicetree/bindings/net/mdio-gpio.txt new file mode 100644 index 00000000000..bc954952901 --- /dev/null +++ b/Documentation/devicetree/bindings/net/mdio-gpio.txt @@ -0,0 +1,19 @@ +MDIO on GPIOs + +Currently defined compatibles: +- virtual,gpio-mdio + +MDC and MDIO lines connected to GPIO controllers are listed in the +gpios property as described in section VIII.1 in the following order: + +MDC, MDIO. + +Example: + +mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&qe_pio_a 11 + &qe_pio_c 6>; +}; diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt new file mode 100644 index 00000000000..bb8c742eb8c --- /dev/null +++ b/Documentation/devicetree/bindings/net/phy.txt @@ -0,0 +1,25 @@ +PHY nodes + +Required properties: + + - device_type : Should be "ethernet-phy" + - interrupts : where a is the interrupt number and b is a + field that represents an encoding of the sense and level + information for the interrupt. This should be encoded based on + the information in section 2) depending on the type of interrupt + controller you have. + - interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. + - reg : The ID number for the phy, usually a small integer + - linux,phandle : phandle for this node; likely referenced by an + ethernet controller node. + +Example: + +ethernet-phy@0 { + linux,phandle = <2452000> + interrupt-parent = <40000>; + interrupts = <35 1>; + reg = <0>; + device_type = "ethernet-phy"; +}; diff --git a/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt b/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt new file mode 100644 index 00000000000..35a46536240 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt @@ -0,0 +1,40 @@ +* Freescale 83xx and 512x PCI bridges + +Freescale 83xx and 512x SOCs include the same pci bridge core. + +83xx/512x specific notes: +- reg: should contain two address length tuples + The first is for the internal pci bridge registers + The second is for the pci config space access registers + +Example (MPC8313ERDB) + pci0: pci@e0008500 { + cell-index = <1>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0E -mini PCI */ + 0x7000 0x0 0x0 0x1 &ipic 18 0x8 + 0x7000 0x0 0x0 0x2 &ipic 18 0x8 + 0x7000 0x0 0x0 0x3 &ipic 18 0x8 + 0x7000 0x0 0x0 0x4 &ipic 18 0x8 + + /* IDSEL 0x0F - PCI slot */ + 0x7800 0x0 0x0 0x1 &ipic 17 0x8 + 0x7800 0x0 0x0 0x2 &ipic 18 0x8 + 0x7800 0x0 0x0 0x3 &ipic 17 0x8 + 0x7800 0x0 0x0 0x4 &ipic 18 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0x0 0x0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; diff --git a/Documentation/devicetree/bindings/powerpc/4xx/cpm.txt b/Documentation/devicetree/bindings/powerpc/4xx/cpm.txt new file mode 100644 index 00000000000..ee459806d35 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/4xx/cpm.txt @@ -0,0 +1,52 @@ +PPC4xx Clock Power Management (CPM) node + +Required properties: + - compatible : compatible list, currently only "ibm,cpm" + - dcr-access-method : "native" + - dcr-reg : < DCR register range > + +Optional properties: + - er-offset : All 4xx SoCs with a CPM controller have + one of two different order for the CPM + registers. Some have the CPM registers + in the following order (ER,FR,SR). The + others have them in the following order + (SR,ER,FR). For the second case set + er-offset = <1>. + - unused-units : specifier consist of one cell. For each + bit in the cell, the corresponding bit + in CPM will be set to turn off unused + devices. + - idle-doze : specifier consist of one cell. For each + bit in the cell, the corresponding bit + in CPM will be set to turn off unused + devices. This is usually just CPM[CPU]. + - standby : specifier consist of one cell. For each + bit in the cell, the corresponding bit + in CPM will be set on standby and + restored on resume. + - suspend : specifier consist of one cell. For each + bit in the cell, the corresponding bit + in CPM will be set on suspend (mem) and + restored on resume. Note, for standby + and suspend the corresponding bits can + be different or the same. Usually for + standby only class 2 and 3 units are set. + However, the interface does not care. + If they are the same, the additional + power saving will be seeing if support + is available to put the DDR in self + refresh mode and any additional power + saving techniques for the specific SoC. + +Example: + CPM0: cpm { + compatible = "ibm,cpm"; + dcr-access-method = "native"; + dcr-reg = <0x160 0x003>; + er-offset = <0>; + unused-units = <0x00000100>; + idle-doze = <0x02000000>; + standby = <0xfeff0000>; + suspend = <0xfeff791d>; +}; diff --git a/Documentation/devicetree/bindings/powerpc/4xx/emac.txt b/Documentation/devicetree/bindings/powerpc/4xx/emac.txt new file mode 100644 index 00000000000..2161334a7ca --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/4xx/emac.txt @@ -0,0 +1,148 @@ + 4xx/Axon EMAC ethernet nodes + + The EMAC ethernet controller in IBM and AMCC 4xx chips, and also + the Axon bridge. To operate this needs to interact with a ths + special McMAL DMA controller, and sometimes an RGMII or ZMII + interface. In addition to the nodes and properties described + below, the node for the OPB bus on which the EMAC sits must have a + correct clock-frequency property. + + i) The EMAC node itself + + Required properties: + - device_type : "network" + + - compatible : compatible list, contains 2 entries, first is + "ibm,emac-CHIP" where CHIP is the host ASIC (440gx, + 405gp, Axon) and second is either "ibm,emac" or + "ibm,emac4". For Axon, thus, we have: "ibm,emac-axon", + "ibm,emac4" + - interrupts : + - interrupt-parent : optional, if needed for interrupt mapping + - reg : + - local-mac-address : 6 bytes, MAC address + - mal-device : phandle of the associated McMAL node + - mal-tx-channel : 1 cell, index of the tx channel on McMAL associated + with this EMAC + - mal-rx-channel : 1 cell, index of the rx channel on McMAL associated + with this EMAC + - cell-index : 1 cell, hardware index of the EMAC cell on a given + ASIC (typically 0x0 and 0x1 for EMAC0 and EMAC1 on + each Axon chip) + - max-frame-size : 1 cell, maximum frame size supported in bytes + - rx-fifo-size : 1 cell, Rx fifo size in bytes for 10 and 100 Mb/sec + operations. + For Axon, 2048 + - tx-fifo-size : 1 cell, Tx fifo size in bytes for 10 and 100 Mb/sec + operations. + For Axon, 2048. + - fifo-entry-size : 1 cell, size of a fifo entry (used to calculate + thresholds). + For Axon, 0x00000010 + - mal-burst-size : 1 cell, MAL burst size (used to calculate thresholds) + in bytes. + For Axon, 0x00000100 (I think ...) + - phy-mode : string, mode of operations of the PHY interface. + Supported values are: "mii", "rmii", "smii", "rgmii", + "tbi", "gmii", rtbi", "sgmii". + For Axon on CAB, it is "rgmii" + - mdio-device : 1 cell, required iff using shared MDIO registers + (440EP). phandle of the EMAC to use to drive the + MDIO lines for the PHY used by this EMAC. + - zmii-device : 1 cell, required iff connected to a ZMII. phandle of + the ZMII device node + - zmii-channel : 1 cell, required iff connected to a ZMII. Which ZMII + channel or 0xffffffff if ZMII is only used for MDIO. + - rgmii-device : 1 cell, required iff connected to an RGMII. phandle + of the RGMII device node. + For Axon: phandle of plb5/plb4/opb/rgmii + - rgmii-channel : 1 cell, required iff connected to an RGMII. Which + RGMII channel is used by this EMAC. + Fox Axon: present, whatever value is appropriate for each + EMAC, that is the content of the current (bogus) "phy-port" + property. + + Optional properties: + - phy-address : 1 cell, optional, MDIO address of the PHY. If absent, + a search is performed. + - phy-map : 1 cell, optional, bitmap of addresses to probe the PHY + for, used if phy-address is absent. bit 0x00000001 is + MDIO address 0. + For Axon it can be absent, though my current driver + doesn't handle phy-address yet so for now, keep + 0x00ffffff in it. + - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec + operations (if absent the value is the same as + rx-fifo-size). For Axon, either absent or 2048. + - tx-fifo-size-gige : 1 cell, Tx fifo size in bytes for 1000 Mb/sec + operations (if absent the value is the same as + tx-fifo-size). For Axon, either absent or 2048. + - tah-device : 1 cell, optional. If connected to a TAH engine for + offload, phandle of the TAH device node. + - tah-channel : 1 cell, optional. If appropriate, channel used on the + TAH engine. + + Example: + + EMAC0: ethernet@40000800 { + device_type = "network"; + compatible = "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <1c 4 1d 4>; + reg = <40000800 70>; + local-mac-address = [00 04 AC E3 1B 1E]; + mal-device = <&MAL0>; + mal-tx-channel = <0 1>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rmii"; + phy-map = <00000001>; + zmii-device = <&ZMII0>; + zmii-channel = <0>; + }; + + ii) McMAL node + + Required properties: + - device_type : "dma-controller" + - compatible : compatible list, containing 2 entries, first is + "ibm,mcmal-CHIP" where CHIP is the host ASIC (like + emac) and the second is either "ibm,mcmal" or + "ibm,mcmal2". + For Axon, "ibm,mcmal-axon","ibm,mcmal2" + - interrupts : . + For Axon: This is _different_ from the current + firmware. We use the "delayed" interrupts for txeob + and rxeob. Thus we end up with mapping those 5 MPIC + interrupts, all level positive sensitive: 10, 11, 32, + 33, 34 (in decimal) + - dcr-reg : < DCR registers range > + - dcr-parent : if needed for dcr-reg + - num-tx-chans : 1 cell, number of Tx channels + - num-rx-chans : 1 cell, number of Rx channels + + iii) ZMII node + + Required properties: + - compatible : compatible list, containing 2 entries, first is + "ibm,zmii-CHIP" where CHIP is the host ASIC (like + EMAC) and the second is "ibm,zmii". + For Axon, there is no ZMII node. + - reg : + + iv) RGMII node + + Required properties: + - compatible : compatible list, containing 2 entries, first is + "ibm,rgmii-CHIP" where CHIP is the host ASIC (like + EMAC) and the second is "ibm,rgmii". + For Axon, "ibm,rgmii-axon","ibm,rgmii" + - reg : + - revision : as provided by the RGMII new version register if + available. + For Axon: 0x0000012a + diff --git a/Documentation/devicetree/bindings/powerpc/4xx/ndfc.txt b/Documentation/devicetree/bindings/powerpc/4xx/ndfc.txt new file mode 100644 index 00000000000..869f0b5f16e --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/4xx/ndfc.txt @@ -0,0 +1,39 @@ +AMCC NDFC (NanD Flash Controller) + +Required properties: +- compatible : "ibm,ndfc". +- reg : should specify chip select and size used for the chip (0x2000). + +Optional properties: +- ccr : NDFC config and control register value (default 0). +- bank-settings : NDFC bank configuration register value (default 0). + +Notes: +- partition(s) - follows the OF MTD standard for partitions + +Example: + +ndfc@1,0 { + compatible = "ibm,ndfc"; + reg = <0x00000001 0x00000000 0x00002000>; + ccr = <0x00001000>; + bank-settings = <0x80002222>; + #address-cells = <1>; + #size-cells = <1>; + + nand { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x00000000 0x00200000>; + }; + partition@200000 { + label = "root"; + reg = <0x00200000 0x03E00000>; + }; + }; +}; + + diff --git a/Documentation/devicetree/bindings/powerpc/4xx/ppc440spe-adma.txt b/Documentation/devicetree/bindings/powerpc/4xx/ppc440spe-adma.txt new file mode 100644 index 00000000000..515ebcf1b97 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/4xx/ppc440spe-adma.txt @@ -0,0 +1,93 @@ +PPC440SPe DMA/XOR (DMA Controller and XOR Accelerator) + +Device nodes needed for operation of the ppc440spe-adma driver +are specified hereby. These are I2O/DMA, DMA and XOR nodes +for DMA engines and Memory Queue Module node. The latter is used +by ADMA driver for configuration of RAID-6 H/W capabilities of +the PPC440SPe. In addition to the nodes and properties described +below, the ranges property of PLB node must specify ranges for +DMA devices. + + i) The I2O node + + Required properties: + + - compatible : "ibm,i2o-440spe"; + - reg : + - dcr-reg : + + Example: + + I2O: i2o@400100000 { + compatible = "ibm,i2o-440spe"; + reg = <0x00000004 0x00100000 0x100>; + dcr-reg = <0x060 0x020>; + }; + + + ii) The DMA node + + Required properties: + + - compatible : "ibm,dma-440spe"; + - cell-index : 1 cell, hardware index of the DMA engine + (typically 0x0 and 0x1 for DMA0 and DMA1) + - reg : + - dcr-reg : + - interrupts : . + - interrupt-parent : needed for interrupt mapping + + Example: + + DMA0: dma0@400100100 { + compatible = "ibm,dma-440spe"; + cell-index = <0>; + reg = <0x00000004 0x00100100 0x100>; + dcr-reg = <0x060 0x020>; + interrupt-parent = <&DMA0>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = < + 0 &UIC0 0x14 4 + 1 &UIC1 0x16 4>; + }; + + + iii) XOR Accelerator node + + Required properties: + + - compatible : "amcc,xor-accelerator"; + - reg : + - interrupts : + - interrupt-parent : for interrupt mapping + + Example: + + xor-accel@400200000 { + compatible = "amcc,xor-accelerator"; + reg = <0x00000004 0x00200000 0x400>; + interrupt-parent = <&UIC1>; + interrupts = <0x1f 4>; + }; + + + iv) Memory Queue Module node + + Required properties: + + - compatible : "ibm,mq-440spe"; + - dcr-reg : + + Example: + + MQ0: mq { + compatible = "ibm,mq-440spe"; + dcr-reg = <0x040 0x020>; + }; + diff --git a/Documentation/devicetree/bindings/powerpc/4xx/reboot.txt b/Documentation/devicetree/bindings/powerpc/4xx/reboot.txt new file mode 100644 index 00000000000..d7217260589 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/4xx/reboot.txt @@ -0,0 +1,18 @@ +Reboot property to control system reboot on PPC4xx systems: + +By setting "reset_type" to one of the following values, the default +software reset mechanism may be overidden. Here the possible values of +"reset_type": + + 1 - PPC4xx core reset + 2 - PPC4xx chip reset + 3 - PPC4xx system reset (default) + +Example: + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,440SPe"; + ... + reset-type = <2>; /* Use chip-reset */ + }; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/board.txt b/Documentation/devicetree/bindings/powerpc/fsl/board.txt new file mode 100644 index 00000000000..39e941515a3 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/board.txt @@ -0,0 +1,63 @@ +* Board Control and Status (BCSR) + +Required properties: + + - compatible : Should be "fsl,-bcsr" + - reg : Offset and length of the register set for the device + +Example: + + bcsr@f8000000 { + compatible = "fsl,mpc8360mds-bcsr"; + reg = ; + }; + +* Freescale on board FPGA + +This is the memory-mapped registers for on board FPGA. + +Required properities: +- compatible : should be "fsl,fpga-pixis". +- reg : should contain the address and the length of the FPPGA register + set. +- interrupt-parent: should specify phandle for the interrupt controller. +- interrupts : should specify event (wakeup) IRQ. + +Example (MPC8610HPCD): + + board-control@e8000000 { + compatible = "fsl,fpga-pixis"; + reg = <0xe8000000 32>; + interrupt-parent = <&mpic>; + interrupts = <8 8>; + }; + +* Freescale BCSR GPIO banks + +Some BCSR registers act as simple GPIO controllers, each such +register can be represented by the gpio-controller node. + +Required properities: +- compatible : Should be "fsl,-bcsr-gpio". +- reg : Should contain the address and the length of the GPIO bank + register. +- #gpio-cells : Should be two. The first cell is the pin number and the + second cell is used to specify optional parameters (currently unused). +- gpio-controller : Marks the port as GPIO controller. + +Example: + + bcsr@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8360mds-bcsr"; + reg = <1 0 0x8000>; + ranges = <0 1 0 0x8000>; + + bcsr13: gpio-controller@d { + #gpio-cells = <2>; + compatible = "fsl,mpc8360mds-bcsr-gpio"; + reg = <0xd 1>; + gpio-controller; + }; + }; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/cpm.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/cpm.txt new file mode 100644 index 00000000000..160c752484b --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/cpm.txt @@ -0,0 +1,67 @@ +* Freescale Communications Processor Module + +NOTE: This is an interim binding, and will likely change slightly, +as more devices are supported. The QE bindings especially are +incomplete. + +* Root CPM node + +Properties: +- compatible : "fsl,cpm1", "fsl,cpm2", or "fsl,qe". +- reg : A 48-byte region beginning with CPCR. + +Example: + cpm@119c0 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + compatible = "fsl,mpc8272-cpm", "fsl,cpm2"; + reg = <119c0 30>; + } + +* Properties common to multiple CPM/QE devices + +- fsl,cpm-command : This value is ORed with the opcode and command flag + to specify the device on which a CPM command operates. + +- fsl,cpm-brg : Indicates which baud rate generator the device + is associated with. If absent, an unused BRG + should be dynamically allocated. If zero, the + device uses an external clock rather than a BRG. + +- reg : Unless otherwise specified, the first resource represents the + scc/fcc/ucc registers, and the second represents the device's + parameter RAM region (if it has one). + +* Multi-User RAM (MURAM) + +The multi-user/dual-ported RAM is expressed as a bus under the CPM node. + +Ranges must be set up subject to the following restrictions: + +- Children's reg nodes must be offsets from the start of all muram, even + if the user-data area does not begin at zero. +- If multiple range entries are used, the difference between the parent + address and the child address must be the same in all, so that a single + mapping can cover them all while maintaining the ability to determine + CPM-side offsets with pointer subtraction. It is recommended that + multiple range entries not be used. +- A child address of zero must be translatable, even if no reg resources + contain it. + +A child "data" node must exist, compatible with "fsl,cpm-muram-data", to +indicate the portion of muram that is usable by the OS for arbitrary +purposes. The data node may have an arbitrary number of reg resources, +all of which contribute to the allocatable muram pool. + +Example, based on mpc8272: + muram@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 2000 9800 800>; + }; + }; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/cpm/brg.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/cpm/brg.txt new file mode 100644 index 00000000000..4c7d45eaf02 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/cpm/brg.txt @@ -0,0 +1,21 @@ +* Baud Rate Generators + +Currently defined compatibles: +fsl,cpm-brg +fsl,cpm1-brg +fsl,cpm2-brg + +Properties: +- reg : There may be an arbitrary number of reg resources; BRG + numbers are assigned to these in order. +- clock-frequency : Specifies the base frequency driving + the BRG. + +Example: + brg@119f0 { + compatible = "fsl,mpc8272-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <119f0 10 115f0 10>; + clock-frequency = ; + }; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/cpm/i2c.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/cpm/i2c.txt new file mode 100644 index 00000000000..87bc6048667 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/cpm/i2c.txt @@ -0,0 +1,41 @@ +* I2C + +The I2C controller is expressed as a bus under the CPM node. + +Properties: +- compatible : "fsl,cpm1-i2c", "fsl,cpm2-i2c" +- reg : On CPM2 devices, the second resource doesn't specify the I2C + Parameter RAM itself, but the I2C_BASE field of the CPM2 Parameter RAM + (typically 0x8afc 0x2). +- #address-cells : Should be one. The cell is the i2c device address with + the r/w bit set to zero. +- #size-cells : Should be zero. +- clock-frequency : Can be used to set the i2c clock frequency. If + unspecified, a default frequency of 60kHz is being used. +The following two properties are deprecated. They are only used by legacy +i2c drivers to find the bus to probe: +- linux,i2c-index : Can be used to hard code an i2c bus number. By default, + the bus number is dynamically assigned by the i2c core. +- linux,i2c-class : Can be used to override the i2c class. The class is used + by legacy i2c device drivers to find a bus in a specific context like + system management, video or sound. By default, I2C_CLASS_HWMON (1) is + being used. The definition of the classes can be found in + include/i2c/i2c.h + +Example, based on mpc823: + + i2c@860 { + compatible = "fsl,mpc823-i2c", + "fsl,cpm1-i2c"; + reg = <0x860 0x20 0x3c80 0x30>; + interrupts = <16>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-command = <0x10>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@68 { + compatible = "dallas,ds1307"; + reg = <0x68>; + }; + }; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/cpm/pic.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/cpm/pic.txt new file mode 100644 index 00000000000..8e3ee168161 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/cpm/pic.txt @@ -0,0 +1,18 @@ +* Interrupt Controllers + +Currently defined compatibles: +- fsl,cpm1-pic + - only one interrupt cell +- fsl,pq1-pic +- fsl,cpm2-pic + - second interrupt cell is level/sense: + - 2 is falling edge + - 8 is active low + +Example: + interrupt-controller@10c00 { + #interrupt-cells = <2>; + interrupt-controller; + reg = <10c00 80>; + compatible = "mpc8272-pic", "fsl,cpm2-pic"; + }; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/cpm/usb.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/cpm/usb.txt new file mode 100644 index 00000000000..74bfda4bb82 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/cpm/usb.txt @@ -0,0 +1,15 @@ +* USB (Universal Serial Bus Controller) + +Properties: +- compatible : "fsl,cpm1-usb", "fsl,cpm2-usb", "fsl,qe-usb" + +Example: + usb@11bc0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,cpm2-usb"; + reg = <11b60 18 8b00 100>; + interrupts = ; + interrupt-parent = <&PIC>; + fsl,cpm-command = <2e600000>; + }; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/gpio.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/gpio.txt new file mode 100644 index 00000000000..349f79fd707 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/gpio.txt @@ -0,0 +1,38 @@ +Every GPIO controller node must have #gpio-cells property defined, +this information will be used to translate gpio-specifiers. + +On CPM1 devices, all ports are using slightly different register layouts. +Ports A, C and D are 16bit ports and Ports B and E are 32bit ports. + +On CPM2 devices, all ports are 32bit ports and use a common register layout. + +Required properties: +- compatible : "fsl,cpm1-pario-bank-a", "fsl,cpm1-pario-bank-b", + "fsl,cpm1-pario-bank-c", "fsl,cpm1-pario-bank-d", + "fsl,cpm1-pario-bank-e", "fsl,cpm2-pario-bank" +- #gpio-cells : Should be two. The first cell is the pin number and the + second cell is used to specify optional parameters (currently unused). +- gpio-controller : Marks the port as GPIO controller. + +Example of three SOC GPIO banks defined as gpio-controller nodes: + + CPM1_PIO_A: gpio-controller@950 { + #gpio-cells = <2>; + compatible = "fsl,cpm1-pario-bank-a"; + reg = <0x950 0x10>; + gpio-controller; + }; + + CPM1_PIO_B: gpio-controller@ab8 { + #gpio-cells = <2>; + compatible = "fsl,cpm1-pario-bank-b"; + reg = <0xab8 0x10>; + gpio-controller; + }; + + CPM1_PIO_E: gpio-controller@ac8 { + #gpio-cells = <2>; + compatible = "fsl,cpm1-pario-bank-e"; + reg = <0xac8 0x18>; + gpio-controller; + }; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/network.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/network.txt new file mode 100644 index 00000000000..0e426944658 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/network.txt @@ -0,0 +1,45 @@ +* Network + +Currently defined compatibles: +- fsl,cpm1-scc-enet +- fsl,cpm2-scc-enet +- fsl,cpm1-fec-enet +- fsl,cpm2-fcc-enet (third resource is GFEMR) +- fsl,qe-enet + +Example: + + ethernet@11300 { + device_type = "network"; + compatible = "fsl,mpc8272-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <11300 20 8400 100 11390 1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <20 8>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY0>; + fsl,cpm-command = <12000300>; + }; + +* MDIO + +Currently defined compatibles: +fsl,pq1-fec-mdio (reg is same as first resource of FEC device) +fsl,cpm2-mdio-bitbang (reg is port C registers) + +Properties for fsl,cpm2-mdio-bitbang: +fsl,mdio-pin : pin of port C controlling mdio data +fsl,mdc-pin : pin of port C controlling mdio clock + +Example: + mdio@10d40 { + device_type = "mdio"; + compatible = "fsl,mpc8272ads-mdio-bitbang", + "fsl,mpc8272-mdio-bitbang", + "fsl,cpm2-mdio-bitbang"; + reg = <10d40 14>; + #address-cells = <1>; + #size-cells = <0>; + fsl,mdio-pin = <12>; + fsl,mdc-pin = <13>; + }; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt new file mode 100644 index 00000000000..4f8930263dd --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt @@ -0,0 +1,115 @@ +* Freescale QUICC Engine module (QE) +This represents qe module that is installed on PowerQUICC II Pro. + +NOTE: This is an interim binding; it should be updated to fit +in with the CPM binding later in this document. + +Basically, it is a bus of devices, that could act more or less +as a complete entity (UCC, USB etc ). All of them should be siblings on +the "root" qe node, using the common properties from there. +The description below applies to the qe of MPC8360 and +more nodes and properties would be extended in the future. + +i) Root QE device + +Required properties: +- compatible : should be "fsl,qe"; +- model : precise model of the QE, Can be "QE", "CPM", or "CPM2" +- reg : offset and length of the device registers. +- bus-frequency : the clock frequency for QUICC Engine. +- fsl,qe-num-riscs: define how many RISC engines the QE has. +- fsl,qe-num-snums: define how many serial number(SNUM) the QE can use for the + threads. + +Optional properties: +- fsl,firmware-phandle: + Usage: required only if there is no fsl,qe-firmware child node + Value type: + Definition: Points to a firmware node (see "QE Firmware Node" below) + that contains the firmware that should be uploaded for this QE. + The compatible property for the firmware node should say, + "fsl,qe-firmware". + +Recommended properties +- brg-frequency : the internal clock source frequency for baud-rate + generators in Hz. + +Example: + qe@e0100000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + compatible = "fsl,qe"; + ranges = <0 e0100000 00100000>; + reg = ; + brg-frequency = <0>; + bus-frequency = <179A7B00>; + } + +* Multi-User RAM (MURAM) + +Required properties: +- compatible : should be "fsl,qe-muram", "fsl,cpm-muram". +- mode : the could be "host" or "slave". +- ranges : Should be defined as specified in 1) to describe the + translation of MURAM addresses. +- data-only : sub-node which defines the address area under MURAM + bus that can be allocated as data/parameter + +Example: + + muram@10000 { + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0 00010000 0000c000>; + + data-only@0{ + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0 c000>; + }; + }; + +* QE Firmware Node + +This node defines a firmware binary that is embedded in the device tree, for +the purpose of passing the firmware from bootloader to the kernel, or from +the hypervisor to the guest. + +The firmware node itself contains the firmware binary contents, a compatible +property, and any firmware-specific properties. The node should be placed +inside a QE node that needs it. Doing so eliminates the need for a +fsl,firmware-phandle property. Other QE nodes that need the same firmware +should define an fsl,firmware-phandle property that points to the firmware node +in the first QE node. + +The fsl,firmware property can be specified in the DTS (possibly using incbin) +or can be inserted by the boot loader at boot time. + +Required properties: + - compatible + Usage: required + Value type: + Definition: A standard property. Specify a string that indicates what + kind of firmware it is. For QE, this should be "fsl,qe-firmware". + + - fsl,firmware + Usage: required + Value type: , encoded as an array of bytes + Definition: A standard property. This property contains the firmware + binary "blob". + +Example: + qe1@e0080000 { + compatible = "fsl,qe"; + qe_firmware:qe-firmware { + compatible = "fsl,qe-firmware"; + fsl,firmware = [0x70 0xcd 0x00 0x00 0x01 0x46 0x45 ...]; + }; + ... + }; + + qe2@e0090000 { + compatible = "fsl,qe"; + fsl,firmware-phandle = <&qe_firmware>; + ... + }; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/firmware.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/firmware.txt new file mode 100644 index 00000000000..249db3a15d1 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/firmware.txt @@ -0,0 +1,24 @@ +* Uploaded QE firmware + + If a new firmware has been uploaded to the QE (usually by the + boot loader), then a 'firmware' child node should be added to the QE + node. This node provides information on the uploaded firmware that + device drivers may need. + + Required properties: + - id: The string name of the firmware. This is taken from the 'id' + member of the qe_firmware structure of the uploaded firmware. + Device drivers can search this string to determine if the + firmware they want is already present. + - extended-modes: The Extended Modes bitfield, taken from the + firmware binary. It is a 64-bit number represented + as an array of two 32-bit numbers. + - virtual-traps: The virtual traps, taken from the firmware binary. + It is an array of 8 32-bit numbers. + +Example: + firmware { + id = "Soft-UART"; + extended-modes = <0 0>; + virtual-traps = <0 0 0 0 0 0 0 0>; + }; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/par_io.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/par_io.txt new file mode 100644 index 00000000000..60984260207 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/par_io.txt @@ -0,0 +1,51 @@ +* Parallel I/O Ports + +This node configures Parallel I/O ports for CPUs with QE support. +The node should reside in the "soc" node of the tree. For each +device that using parallel I/O ports, a child node should be created. +See the definition of the Pin configuration nodes below for more +information. + +Required properties: +- device_type : should be "par_io". +- reg : offset to the register set and its length. +- num-ports : number of Parallel I/O ports + +Example: +par_io@1400 { + reg = <1400 100>; + #address-cells = <1>; + #size-cells = <0>; + device_type = "par_io"; + num-ports = <7>; + ucc_pin@01 { + ...... + }; + +Note that "par_io" nodes are obsolete, and should not be used for +the new device trees. Instead, each Par I/O bank should be represented +via its own gpio-controller node: + +Required properties: +- #gpio-cells : should be "2". +- compatible : should be "fsl,-qe-pario-bank", + "fsl,mpc8323-qe-pario-bank". +- reg : offset to the register set and its length. +- gpio-controller : node to identify gpio controllers. + +Example: + qe_pio_a: gpio-controller@1400 { + #gpio-cells = <2>; + compatible = "fsl,mpc8360-qe-pario-bank", + "fsl,mpc8323-qe-pario-bank"; + reg = <0x1400 0x18>; + gpio-controller; + }; + + qe_pio_e: gpio-controller@1460 { + #gpio-cells = <2>; + compatible = "fsl,mpc8360-qe-pario-bank", + "fsl,mpc8323-qe-pario-bank"; + reg = <0x1460 0x18>; + gpio-controller; + }; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/pincfg.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/pincfg.txt new file mode 100644 index 00000000000..c5b43061db3 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/pincfg.txt @@ -0,0 +1,60 @@ +* Pin configuration nodes + +Required properties: +- linux,phandle : phandle of this node; likely referenced by a QE + device. +- pio-map : array of pin configurations. Each pin is defined by 6 + integers. The six numbers are respectively: port, pin, dir, + open_drain, assignment, has_irq. + - port : port number of the pin; 0-6 represent port A-G in UM. + - pin : pin number in the port. + - dir : direction of the pin, should encode as follows: + + 0 = The pin is disabled + 1 = The pin is an output + 2 = The pin is an input + 3 = The pin is I/O + + - open_drain : indicates the pin is normal or wired-OR: + + 0 = The pin is actively driven as an output + 1 = The pin is an open-drain driver. As an output, the pin is + driven active-low, otherwise it is three-stated. + + - assignment : function number of the pin according to the Pin Assignment + tables in User Manual. Each pin can have up to 4 possible functions in + QE and two options for CPM. + - has_irq : indicates if the pin is used as source of external + interrupts. + +Example: + ucc_pin@01 { + linux,phandle = <140001>; + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0 3 1 0 1 0 /* TxD0 */ + 0 4 1 0 1 0 /* TxD1 */ + 0 5 1 0 1 0 /* TxD2 */ + 0 6 1 0 1 0 /* TxD3 */ + 1 6 1 0 3 0 /* TxD4 */ + 1 7 1 0 1 0 /* TxD5 */ + 1 9 1 0 2 0 /* TxD6 */ + 1 a 1 0 2 0 /* TxD7 */ + 0 9 2 0 1 0 /* RxD0 */ + 0 a 2 0 1 0 /* RxD1 */ + 0 b 2 0 1 0 /* RxD2 */ + 0 c 2 0 1 0 /* RxD3 */ + 0 d 2 0 1 0 /* RxD4 */ + 1 1 2 0 2 0 /* RxD5 */ + 1 0 2 0 2 0 /* RxD6 */ + 1 4 2 0 2 0 /* RxD7 */ + 0 7 1 0 1 0 /* TX_EN */ + 0 8 1 0 1 0 /* TX_ER */ + 0 f 2 0 1 0 /* RX_DV */ + 0 10 2 0 1 0 /* RX_ER */ + 0 0 2 0 1 0 /* RX_CLK */ + 2 9 1 0 3 0 /* GTX_CLK - CLK10 */ + 2 8 2 0 1 0>; /* GTX125 - CLK9 */ + }; + + diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/ucc.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/ucc.txt new file mode 100644 index 00000000000..e47734bee3f --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/ucc.txt @@ -0,0 +1,70 @@ +* UCC (Unified Communications Controllers) + +Required properties: +- device_type : should be "network", "hldc", "uart", "transparent" + "bisync", "atm", or "serial". +- compatible : could be "ucc_geth" or "fsl_atm" and so on. +- cell-index : the ucc number(1-8), corresponding to UCCx in UM. +- reg : Offset and length of the register set for the device +- interrupts : where a is the interrupt number and b is a + field that represents an encoding of the sense and level + information for the interrupt. This should be encoded based on + the information in section 2) depending on the type of interrupt + controller you have. +- interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. +- pio-handle : The phandle for the Parallel I/O port configuration. +- port-number : for UART drivers, the port number to use, between 0 and 3. + This usually corresponds to the /dev/ttyQE device, e.g. <0> = /dev/ttyQE0. + The port number is added to the minor number of the device. Unlike the + CPM UART driver, the port-number is required for the QE UART driver. +- soft-uart : for UART drivers, if specified this means the QE UART device + driver should use "Soft-UART" mode, which is needed on some SOCs that have + broken UART hardware. Soft-UART is provided via a microcode upload. +- rx-clock-name: the UCC receive clock source + "none": clock source is disabled + "brg1" through "brg16": clock source is BRG1-BRG16, respectively + "clk1" through "clk24": clock source is CLK1-CLK24, respectively +- tx-clock-name: the UCC transmit clock source + "none": clock source is disabled + "brg1" through "brg16": clock source is BRG1-BRG16, respectively + "clk1" through "clk24": clock source is CLK1-CLK24, respectively +The following two properties are deprecated. rx-clock has been replaced +with rx-clock-name, and tx-clock has been replaced with tx-clock-name. +Drivers that currently use the deprecated properties should continue to +do so, in order to support older device trees, but they should be updated +to check for the new properties first. +- rx-clock : represents the UCC receive clock source. + 0x00 : clock source is disabled; + 0x1~0x10 : clock source is BRG1~BRG16 respectively; + 0x11~0x28: clock source is QE_CLK1~QE_CLK24 respectively. +- tx-clock: represents the UCC transmit clock source; + 0x00 : clock source is disabled; + 0x1~0x10 : clock source is BRG1~BRG16 respectively; + 0x11~0x28: clock source is QE_CLK1~QE_CLK24 respectively. + +Required properties for network device_type: +- mac-address : list of bytes representing the ethernet address. +- phy-handle : The phandle for the PHY connected to this controller. + +Recommended properties: +- phy-connection-type : a string naming the controller/PHY interface type, + i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id" (Internal + Delay), "rgmii-txid" (delay on TX only), "rgmii-rxid" (delay on RX only), + "tbi", or "rtbi". + +Example: + ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <1>; + reg = <2000 200>; + interrupts = ; + interrupt-parent = <700>; + mac-address = [ 00 04 9f 00 23 23 ]; + rx-clock = "none"; + tx-clock = "clk9"; + phy-handle = <212000>; + phy-connection-type = "gmii"; + pio-handle = <140001>; + }; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/usb.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/usb.txt new file mode 100644 index 00000000000..9ccd5f30405 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe/usb.txt @@ -0,0 +1,37 @@ +Freescale QUICC Engine USB Controller + +Required properties: +- compatible : should be "fsl,-qe-usb", "fsl,mpc8323-qe-usb". +- reg : the first two cells should contain usb registers location and + length, the next two two cells should contain PRAM location and + length. +- interrupts : should contain USB interrupt. +- interrupt-parent : interrupt source phandle. +- fsl,fullspeed-clock : specifies the full speed USB clock source: + "none": clock source is disabled + "brg1" through "brg16": clock source is BRG1-BRG16, respectively + "clk1" through "clk24": clock source is CLK1-CLK24, respectively +- fsl,lowspeed-clock : specifies the low speed USB clock source: + "none": clock source is disabled + "brg1" through "brg16": clock source is BRG1-BRG16, respectively + "clk1" through "clk24": clock source is CLK1-CLK24, respectively +- hub-power-budget : USB power budget for the root hub, in mA. +- gpios : should specify GPIOs in this order: USBOE, USBTP, USBTN, USBRP, + USBRN, SPEED (optional), and POWER (optional). + +Example: + +usb@6c0 { + compatible = "fsl,mpc8360-qe-usb", "fsl,mpc8323-qe-usb"; + reg = <0x6c0 0x40 0x8b00 0x100>; + interrupts = <11>; + interrupt-parent = <&qeic>; + fsl,fullspeed-clock = "clk21"; + gpios = <&qe_pio_b 2 0 /* USBOE */ + &qe_pio_b 3 0 /* USBTP */ + &qe_pio_b 8 0 /* USBTN */ + &qe_pio_b 9 0 /* USBRP */ + &qe_pio_b 11 0 /* USBRN */ + &qe_pio_e 20 0 /* SPEED */ + &qe_pio_e 21 0 /* POWER */>; +}; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/serial.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/serial.txt new file mode 100644 index 00000000000..2ea76d9d137 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/serial.txt @@ -0,0 +1,32 @@ +* Serial + +Currently defined compatibles: +- fsl,cpm1-smc-uart +- fsl,cpm2-smc-uart +- fsl,cpm1-scc-uart +- fsl,cpm2-scc-uart +- fsl,qe-uart + +Modem control lines connected to GPIO controllers are listed in the gpios +property as described in booting-without-of.txt, section IX.1 in the following +order: + +CTS, RTS, DCD, DSR, DTR, and RI. + +The gpios property is optional and can be left out when control lines are +not used. + +Example: + + serial@11a00 { + device_type = "serial"; + compatible = "fsl,mpc8272-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <11a00 20 8000 100>; + interrupts = <28 8>; + interrupt-parent = <&PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <00800000>; + gpios = <&gpio_c 15 0 + &gpio_d 29 0>; + }; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/diu.txt b/Documentation/devicetree/bindings/powerpc/fsl/diu.txt new file mode 100644 index 00000000000..b66cb6d31d6 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/diu.txt @@ -0,0 +1,34 @@ +* Freescale Display Interface Unit + +The Freescale DIU is a LCD controller, with proper hardware, it can also +drive DVI monitors. + +Required properties: +- compatible : should be "fsl,diu" or "fsl,mpc5121-diu". +- reg : should contain at least address and length of the DIU register + set. +- interrupts : one DIU interrupt should be described here. +- interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. + +Optional properties: +- edid : verbatim EDID data block describing attached display. + Data from the detailed timing descriptor will be used to + program the display controller. + +Example (MPC8610HPCD): + display@2c000 { + compatible = "fsl,diu"; + reg = <0x2c000 100>; + interrupts = <72 2>; + interrupt-parent = <&mpic>; + }; + +Example for MPC5121: + display@2100 { + compatible = "fsl,mpc5121-diu"; + reg = <0x2100 0x100>; + interrupts = <64 0x8>; + interrupt-parent = <&ipic>; + edid = [edid-data]; + }; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/dma.txt b/Documentation/devicetree/bindings/powerpc/fsl/dma.txt new file mode 100644 index 00000000000..2a4b4bce611 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/dma.txt @@ -0,0 +1,144 @@ +* Freescale 83xx DMA Controller + +Freescale PowerPC 83xx have on chip general purpose DMA controllers. + +Required properties: + +- compatible : compatible list, contains 2 entries, first is + "fsl,CHIP-dma", where CHIP is the processor + (mpc8349, mpc8360, etc.) and the second is + "fsl,elo-dma" +- reg : +- ranges : Should be defined as specified in 1) to describe the + DMA controller channels. +- cell-index : controller index. 0 for controller @ 0x8100 +- interrupts : +- interrupt-parent : optional, if needed for interrupt mapping + + +- DMA channel nodes: + - compatible : compatible list, contains 2 entries, first is + "fsl,CHIP-dma-channel", where CHIP is the processor + (mpc8349, mpc8350, etc.) and the second is + "fsl,elo-dma-channel". However, see note below. + - reg : + - cell-index : dma channel index starts at 0. + +Optional properties: + - interrupts : + (on 83xx this is expected to be identical to + the interrupts property of the parent node) + - interrupt-parent : optional, if needed for interrupt mapping + +Example: + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8349-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a4>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + cell-index = <0>; + reg = <0 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + cell-index = <1>; + reg = <0x80 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + cell-index = <2>; + reg = <0x100 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + cell-index = <3>; + reg = <0x180 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + +* Freescale 85xx/86xx DMA Controller + +Freescale PowerPC 85xx/86xx have on chip general purpose DMA controllers. + +Required properties: + +- compatible : compatible list, contains 2 entries, first is + "fsl,CHIP-dma", where CHIP is the processor + (mpc8540, mpc8540, etc.) and the second is + "fsl,eloplus-dma" +- reg : +- cell-index : controller index. 0 for controller @ 0x21000, + 1 for controller @ 0xc000 +- ranges : Should be defined as specified in 1) to describe the + DMA controller channels. + +- DMA channel nodes: + - compatible : compatible list, contains 2 entries, first is + "fsl,CHIP-dma-channel", where CHIP is the processor + (mpc8540, mpc8560, etc.) and the second is + "fsl,eloplus-dma-channel". However, see note below. + - cell-index : dma channel index starts at 0. + - reg : + - interrupts : + - interrupt-parent : optional, if needed for interrupt mapping + +Example: + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma"; + reg = <0x21300 4>; + ranges = <0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; + reg = <0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + +Note on DMA channel compatible properties: The compatible property must say +"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel" to be used by the Elo DMA +driver (fsldma). Any DMA channel used by fsldma cannot be used by another +DMA driver, such as the SSI sound drivers for the MPC8610. Therefore, any DMA +channel that should be used for another driver should not use +"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel". For the SSI drivers, for +example, the compatible property should be "fsl,ssi-dma-channel". See ssi.txt +for more information. diff --git a/Documentation/devicetree/bindings/powerpc/fsl/ecm.txt b/Documentation/devicetree/bindings/powerpc/fsl/ecm.txt new file mode 100644 index 00000000000..f514f29c67d --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/ecm.txt @@ -0,0 +1,64 @@ +===================================================================== +E500 LAW & Coherency Module Device Tree Binding +Copyright (C) 2009 Freescale Semiconductor Inc. +===================================================================== + +Local Access Window (LAW) Node + +The LAW node represents the region of CCSR space where local access +windows are configured. For ECM based devices this is the first 4k +of CCSR space that includes CCSRBAR, ALTCBAR, ALTCAR, BPTR, and some +number of local access windows as specified by fsl,num-laws. + +PROPERTIES + + - compatible + Usage: required + Value type: + Definition: Must include "fsl,ecm-law" + + - reg + Usage: required + Value type: + Definition: A standard property. The value specifies the + physical address offset and length of the CCSR space + registers. + + - fsl,num-laws + Usage: required + Value type: + Definition: The value specifies the number of local access + windows for this device. + +===================================================================== + +E500 Coherency Module Node + +The E500 LAW node represents the region of CCSR space where ECM config +and error reporting registers exist, this is the second 4k (0x1000) +of CCSR space. + +PROPERTIES + + - compatible + Usage: required + Value type: + Definition: Must include "fsl,CHIP-ecm", "fsl,ecm" where + CHIP is the processor (mpc8572, mpc8544, etc.) + + - reg + Usage: required + Value type: + Definition: A standard property. The value specifies the + physical address offset and length of the CCSR space + registers. + + - interrupts + Usage: required + Value type: + + - interrupt-parent + Usage: required + Value type: + +===================================================================== diff --git a/Documentation/devicetree/bindings/powerpc/fsl/gtm.txt b/Documentation/devicetree/bindings/powerpc/fsl/gtm.txt new file mode 100644 index 00000000000..9a33efded4b --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/gtm.txt @@ -0,0 +1,31 @@ +* Freescale General-purpose Timers Module + +Required properties: + - compatible : should be + "fsl,-gtm", "fsl,gtm" for SOC GTMs + "fsl,-qe-gtm", "fsl,qe-gtm", "fsl,gtm" for QE GTMs + "fsl,-cpm2-gtm", "fsl,cpm2-gtm", "fsl,gtm" for CPM2 GTMs + - reg : should contain gtm registers location and length (0x40). + - interrupts : should contain four interrupts. + - interrupt-parent : interrupt source phandle. + - clock-frequency : specifies the frequency driving the timer. + +Example: + +timer@500 { + compatible = "fsl,mpc8360-gtm", "fsl,gtm"; + reg = <0x500 0x40>; + interrupts = <90 8 78 8 84 8 72 8>; + interrupt-parent = <&ipic>; + /* filled by u-boot */ + clock-frequency = <0>; +}; + +timer@440 { + compatible = "fsl,mpc8360-qe-gtm", "fsl,qe-gtm", "fsl,gtm"; + reg = <0x440 0x40>; + interrupts = <12 13 14 15>; + interrupt-parent = <&qeic>; + /* filled by u-boot */ + clock-frequency = <0>; +}; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/guts.txt b/Documentation/devicetree/bindings/powerpc/fsl/guts.txt new file mode 100644 index 00000000000..9e7a2417dac --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/guts.txt @@ -0,0 +1,25 @@ +* Global Utilities Block + +The global utilities block controls power management, I/O device +enabling, power-on-reset configuration monitoring, general-purpose +I/O signal configuration, alternate function selection for multiplexed +signals, and clock control. + +Required properties: + + - compatible : Should define the compatible device type for + global-utilities. + - reg : Offset and length of the register set for the device. + +Recommended properties: + + - fsl,has-rstcr : Indicates that the global utilities register set + contains a functioning "reset control register" (i.e. the board + is wired to reset upon setting the HRESET_REQ bit in this register). + +Example: + global-utilities@e0000 { /* global utilities block */ + compatible = "fsl,mpc8548-guts"; + reg = ; + fsl,has-rstcr; + }; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/lbc.txt b/Documentation/devicetree/bindings/powerpc/fsl/lbc.txt new file mode 100644 index 00000000000..3300fec501c --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/lbc.txt @@ -0,0 +1,35 @@ +* Chipselect/Local Bus + +Properties: +- name : Should be localbus +- #address-cells : Should be either two or three. The first cell is the + chipselect number, and the remaining cells are the + offset into the chipselect. +- #size-cells : Either one or two, depending on how large each chipselect + can be. +- ranges : Each range corresponds to a single chipselect, and cover + the entire access window as configured. + +Example: + localbus@f0010100 { + compatible = "fsl,mpc8272-localbus", + "fsl,pq2-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = ; + + ranges = <0 0 fe000000 02000000 + 1 0 f4500000 00008000>; + + flash@0,0 { + compatible = "jedec-flash"; + reg = <0 0 2000000>; + bank-width = <4>; + device-width = <1>; + }; + + board-control@1,0 { + reg = <1 0 20>; + compatible = "fsl,mpc8272ads-bcsr"; + }; + }; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mcm.txt b/Documentation/devicetree/bindings/powerpc/fsl/mcm.txt new file mode 100644 index 00000000000..4ceda9b3b41 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/mcm.txt @@ -0,0 +1,64 @@ +===================================================================== +MPX LAW & Coherency Module Device Tree Binding +Copyright (C) 2009 Freescale Semiconductor Inc. +===================================================================== + +Local Access Window (LAW) Node + +The LAW node represents the region of CCSR space where local access +windows are configured. For MCM based devices this is the first 4k +of CCSR space that includes CCSRBAR, ALTCBAR, ALTCAR, BPTR, and some +number of local access windows as specified by fsl,num-laws. + +PROPERTIES + + - compatible + Usage: required + Value type: + Definition: Must include "fsl,mcm-law" + + - reg + Usage: required + Value type: + Definition: A standard property. The value specifies the + physical address offset and length of the CCSR space + registers. + + - fsl,num-laws + Usage: required + Value type: + Definition: The value specifies the number of local access + windows for this device. + +===================================================================== + +MPX Coherency Module Node + +The MPX LAW node represents the region of CCSR space where MCM config +and error reporting registers exist, this is the second 4k (0x1000) +of CCSR space. + +PROPERTIES + + - compatible + Usage: required + Value type: + Definition: Must include "fsl,CHIP-mcm", "fsl,mcm" where + CHIP is the processor (mpc8641, mpc8610, etc.) + + - reg + Usage: required + Value type: + Definition: A standard property. The value specifies the + physical address offset and length of the CCSR space + registers. + + - interrupts + Usage: required + Value type: + + - interrupt-parent + Usage: required + Value type: + +===================================================================== diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt b/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt new file mode 100644 index 00000000000..0f766333b6e --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt @@ -0,0 +1,17 @@ +Freescale MPC8349E-mITX-compatible Power Management Micro Controller Unit (MCU) + +Required properties: +- compatible : "fsl,-", "fsl,mcu-mpc8349emitx". +- reg : should specify I2C address (0x0a). +- #gpio-cells : should be 2. +- gpio-controller : should be present. + +Example: + +mcu@0a { + #gpio-cells = <2>; + compatible = "fsl,mc9s08qg8-mpc8349emitx", + "fsl,mcu-mpc8349emitx"; + reg = <0x0a>; + gpio-controller; +}; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt new file mode 100644 index 00000000000..8832e879891 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt @@ -0,0 +1,70 @@ +MPC5121 PSC Device Tree Bindings + +PSC in UART mode +---------------- + +For PSC in UART mode the needed PSC serial devices +are specified by fsl,mpc5121-psc-uart nodes in the +fsl,mpc5121-immr SoC node. Additionally the PSC FIFO +Controller node fsl,mpc5121-psc-fifo is requered there: + +fsl,mpc5121-psc-uart nodes +-------------------------- + +Required properties : + - compatible : Should contain "fsl,mpc5121-psc-uart" and "fsl,mpc5121-psc" + - cell-index : Index of the PSC in hardware + - reg : Offset and length of the register set for the PSC device + - interrupts : where a is the interrupt number of the + PSC FIFO Controller and b is a field that represents an + encoding of the sense and level information for the interrupt. + - interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. + +Recommended properties : + - fsl,rx-fifo-size : the size of the RX fifo slice (a multiple of 4) + - fsl,tx-fifo-size : the size of the TX fifo slice (a multiple of 4) + + +fsl,mpc5121-psc-fifo node +------------------------- + +Required properties : + - compatible : Should be "fsl,mpc5121-psc-fifo" + - reg : Offset and length of the register set for the PSC + FIFO Controller + - interrupts : where a is the interrupt number of the + PSC FIFO Controller and b is a field that represents an + encoding of the sense and level information for the interrupt. + - interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. + + +Example for a board using PSC0 and PSC1 devices in serial mode: + +serial@11000 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + cell-index = <0>; + reg = <0x11000 0x100>; + interrupts = <40 0x8>; + interrupt-parent = < &ipic >; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; +}; + +serial@11100 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + cell-index = <1>; + reg = <0x11100 0x100>; + interrupts = <40 0x8>; + interrupt-parent = < &ipic >; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; +}; + +pscfifo@11f00 { + compatible = "fsl,mpc5121-psc-fifo"; + reg = <0x11f00 0x100>; + interrupts = <40 0x8>; + interrupt-parent = < &ipic >; +}; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpc5200.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpc5200.txt new file mode 100644 index 00000000000..4ccb2cd5df9 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/mpc5200.txt @@ -0,0 +1,198 @@ +MPC5200 Device Tree Bindings +---------------------------- + +(c) 2006-2009 Secret Lab Technologies Ltd +Grant Likely + +Naming conventions +------------------ +For mpc5200 on-chip devices, the format for each compatible value is +-[-]. The OS should be able to match a device driver +to the device based solely on the compatible value. If two drivers +match on the compatible list; the 'most compatible' driver should be +selected. + +The split between the MPC5200 and the MPC5200B leaves a bit of a +conundrum. How should the compatible property be set up to provide +maximum compatibility information; but still accurately describe the +chip? For the MPC5200; the answer is easy. Most of the SoC devices +originally appeared on the MPC5200. Since they didn't exist anywhere +else; the 5200 compatible properties will contain only one item; +"fsl,mpc5200-". + +The 5200B is almost the same as the 5200, but not quite. It fixes +silicon bugs and it adds a small number of enhancements. Most of the +devices either provide exactly the same interface as on the 5200. A few +devices have extra functions but still have a backwards compatible mode. +To express this information as completely as possible, 5200B device trees +should have two items in the compatible list: + compatible = "fsl,mpc5200b-","fsl,mpc5200-"; + +It is *strongly* recommended that 5200B device trees follow this convention +(instead of only listing the base mpc5200 item). + +ie. ethernet on mpc5200: compatible = "fsl,mpc5200-fec"; + ethernet on mpc5200b: compatible = "fsl,mpc5200b-fec", "fsl,mpc5200-fec"; + +Modal devices, like PSCs, also append the configured function to the +end of the compatible field. ie. A PSC in i2s mode would specify +"fsl,mpc5200-psc-i2s", not "fsl,mpc5200-i2s". This convention is chosen to +avoid naming conflicts with non-psc devices providing the same +function. For example, "fsl,mpc5200-spi" and "fsl,mpc5200-psc-spi" describe +the mpc5200 simple spi device and a PSC spi mode respectively. + +At the time of writing, exact chip may be either 'fsl,mpc5200' or +'fsl,mpc5200b'. + +The soc node +------------ +This node describes the on chip SOC peripherals. Every mpc5200 based +board will have this node, and as such there is a common naming +convention for SOC devices. + +Required properties: +name description +---- ----------- +ranges Memory range of the internal memory mapped registers. + Should be <0 [baseaddr] 0xc000> +reg Should be <[baseaddr] 0x100> +compatible mpc5200: "fsl,mpc5200-immr" + mpc5200b: "fsl,mpc5200b-immr" +system-frequency 'fsystem' frequency in Hz; XLB, IPB, USB and PCI + clocks are derived from the fsystem clock. +bus-frequency IPB bus frequency in Hz. Clock rate + used by most of the soc devices. + +soc child nodes +--------------- +Any on chip SOC devices available to Linux must appear as soc5200 child nodes. + +Note: The tables below show the value for the mpc5200. A mpc5200b device +tree should use the "fsl,mpc5200b-","fsl,mpc5200-" form. + +Required soc5200 child nodes: +name compatible Description +---- ---------- ----------- +cdm@ fsl,mpc5200-cdm Clock Distribution +interrupt-controller@ fsl,mpc5200-pic need an interrupt + controller to boot +bestcomm@ fsl,mpc5200-bestcomm Bestcomm DMA controller + +Recommended soc5200 child nodes; populate as needed for your board +name compatible Description +---- ---------- ----------- +timer@ fsl,mpc5200-gpt General purpose timers +gpio@ fsl,mpc5200-gpio MPC5200 simple gpio controller +gpio@ fsl,mpc5200-gpio-wkup MPC5200 wakeup gpio controller +rtc@ fsl,mpc5200-rtc Real time clock +mscan@ fsl,mpc5200-mscan CAN bus controller +pci@ fsl,mpc5200-pci PCI bridge +serial@ fsl,mpc5200-psc-uart PSC in serial mode +i2s@ fsl,mpc5200-psc-i2s PSC in i2s mode +ac97@ fsl,mpc5200-psc-ac97 PSC in ac97 mode +spi@ fsl,mpc5200-psc-spi PSC in spi mode +irda@ fsl,mpc5200-psc-irda PSC in IrDA mode +spi@ fsl,mpc5200-spi MPC5200 spi device +ethernet@ fsl,mpc5200-fec MPC5200 ethernet device +ata@ fsl,mpc5200-ata IDE ATA interface +i2c@ fsl,mpc5200-i2c I2C controller +usb@ fsl,mpc5200-ohci,ohci-be USB controller +xlb@ fsl,mpc5200-xlb XLB arbitrator + +fsl,mpc5200-gpt nodes +--------------------- +On the mpc5200 and 5200b, GPT0 has a watchdog timer function. If the board +design supports the internal wdt, then the device node for GPT0 should +include the empty property 'fsl,has-wdt'. Note that this does not activate +the watchdog. The timer will function as a GPT if the timer api is used, and +it will function as watchdog if the watchdog device is used. The watchdog +mode has priority over the gpt mode, i.e. if the watchdog is activated, any +gpt api call to this timer will fail with -EBUSY. + +If you add the property + fsl,wdt-on-boot = ; +GPT0 will be marked as in-use watchdog, i.e. blocking every gpt access to it. +If n>0, the watchdog is started with a timeout of n seconds. If n=0, the +configuration of the watchdog is not touched. This is useful in two cases: +- just mark GPT0 as watchdog, blocking gpt accesses, and configure it later; +- do not touch a configuration assigned by the boot loader which supervises + the boot process itself. + +The watchdog will respect the CONFIG_WATCHDOG_NOWAYOUT option. + +An mpc5200-gpt can be used as a single line GPIO controller. To do so, +add the following properties to the gpt node: + gpio-controller; + #gpio-cells = <2>; +When referencing the GPIO line from another node, the first cell must always +be zero and the second cell represents the gpio flags and described in the +gpio device tree binding. + +An mpc5200-gpt can be used as a single line edge sensitive interrupt +controller. To do so, add the following properties to the gpt node: + interrupt-controller; + #interrupt-cells = <1>; +When referencing the IRQ line from another node, the cell represents the +sense mode; 1 for edge rising, 2 for edge falling. + +fsl,mpc5200-psc nodes +--------------------- +The PSCs should include a cell-index which is the index of the PSC in +hardware. cell-index is used to determine which shared SoC registers to +use when setting up PSC clocking. cell-index number starts at '0'. ie: + PSC1 has 'cell-index = <0>' + PSC4 has 'cell-index = <3>' + +PSC in i2s mode: The mpc5200 and mpc5200b PSCs are not compatible when in +i2s mode. An 'mpc5200b-psc-i2s' node cannot include 'mpc5200-psc-i2s' in the +compatible field. + + +fsl,mpc5200-gpio and fsl,mpc5200-gpio-wkup nodes +------------------------------------------------ +Each GPIO controller node should have the empty property gpio-controller and +#gpio-cells set to 2. First cell is the GPIO number which is interpreted +according to the bit numbers in the GPIO control registers. The second cell +is for flags which is currently unused. + +fsl,mpc5200-fec nodes +--------------------- +The FEC node can specify one of the following properties to configure +the MII link: +- fsl,7-wire-mode - An empty property that specifies the link uses 7-wire + mode instead of MII +- current-speed - Specifies that the MII should be configured for a fixed + speed. This property should contain two cells. The + first cell specifies the speed in Mbps and the second + should be '0' for half duplex and '1' for full duplex +- phy-handle - Contains a phandle to an Ethernet PHY. + +Interrupt controller (fsl,mpc5200-pic) node +------------------------------------------- +The mpc5200 pic binding splits hardware IRQ numbers into two levels. The +split reflects the layout of the PIC hardware itself, which groups +interrupts into one of three groups; CRIT, MAIN or PERP. Also, the +Bestcomm dma engine has it's own set of interrupt sources which are +cascaded off of peripheral interrupt 0, which the driver interprets as a +fourth group, SDMA. + +The interrupts property for device nodes using the mpc5200 pic consists +of three cells; + + L1 := [CRIT=0, MAIN=1, PERP=2, SDMA=3] + L2 := interrupt number; directly mapped from the value in the + "ICTL PerStat, MainStat, CritStat Encoded Register" + level := [LEVEL_HIGH=0, EDGE_RISING=1, EDGE_FALLING=2, LEVEL_LOW=3] + +For external IRQs, use the following interrupt property values (how to +specify external interrupts is a frequently asked question): +External interrupts: + external irq0: interrupts = <0 0 n>; + external irq1: interrupts = <1 1 n>; + external irq2: interrupts = <1 2 n>; + external irq3: interrupts = <1 3 n>; +'n' is sense (0: level high, 1: edge rising, 2: edge falling 3: level low) + +fsl,mpc5200-mscan nodes +----------------------- +See file can.txt in this directory. diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt new file mode 100644 index 00000000000..71e39cf3215 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt @@ -0,0 +1,42 @@ +* OpenPIC and its interrupt numbers on Freescale's e500/e600 cores + +The OpenPIC specification does not specify which interrupt source has to +become which interrupt number. This is up to the software implementation +of the interrupt controller. The only requirement is that every +interrupt source has to have an unique interrupt number / vector number. +To accomplish this the current implementation assigns the number zero to +the first source, the number one to the second source and so on until +all interrupt sources have their unique number. +Usually the assigned vector number equals the interrupt number mentioned +in the documentation for a given core / CPU. This is however not true +for the e500 cores (MPC85XX CPUs) where the documentation distinguishes +between internal and external interrupt sources and starts counting at +zero for both of them. + +So what to write for external interrupt source X or internal interrupt +source Y into the device tree? Here is an example: + +The memory map for the interrupt controller in the MPC8544[0] shows, +that the first interrupt source starts at 0x5_0000 (PIC Register Address +Map-Interrupt Source Configuration Registers). This source becomes the +number zero therefore: + External interrupt 0 = interrupt number 0 + External interrupt 1 = interrupt number 1 + External interrupt 2 = interrupt number 2 + ... +Every interrupt number allocates 0x20 bytes register space. So to get +its number it is sufficient to shift the lower 16bits to right by five. +So for the external interrupt 10 we have: + 0x0140 >> 5 = 10 + +After the external sources, the internal sources follow. The in core I2C +controller on the MPC8544 for instance has the internal source number +27. Oo obtain its interrupt number we take the lower 16bits of its memory +address (0x5_0560) and shift it right: + 0x0560 >> 5 = 43 + +Therefore the I2C device node for the MPC8544 CPU has to have the +interrupt number 43 specified in the device tree. + +[0] MPC8544E PowerQUICCTM III, Integrated Host Processor Family Reference Manual + MPC8544ERM Rev. 1 10/2007 diff --git a/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt new file mode 100644 index 00000000000..bcc30bac683 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt @@ -0,0 +1,36 @@ +* Freescale MSI interrupt controller + +Required properties: +- compatible : compatible list, contains 2 entries, + first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572, + etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on + the parent type. +- reg : should contain the address and the length of the shared message + interrupt register set. +- msi-available-ranges: use style section to define which + msi interrupt can be used in the 256 msi interrupts. This property is + optional, without this, all the 256 MSI interrupts can be used. +- interrupts : each one of the interrupts here is one entry per 32 MSIs, + and routed to the host interrupt controller. the interrupts should + be set as edge sensitive. +- interrupt-parent: the phandle for the interrupt controller + that services interrupts for this device. for 83xx cpu, the interrupts + are routed to IPIC, and for 85xx/86xx cpu the interrupts are routed + to MPIC. + +Example: + msi@41600 { + compatible = "fsl,mpc8610-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/pmc.txt b/Documentation/devicetree/bindings/powerpc/fsl/pmc.txt new file mode 100644 index 00000000000..07256b7ffca --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/pmc.txt @@ -0,0 +1,63 @@ +* Power Management Controller + +Properties: +- compatible: "fsl,-pmc". + + "fsl,mpc8349-pmc" should be listed for any chip whose PMC is + compatible. "fsl,mpc8313-pmc" should also be listed for any chip + whose PMC is compatible, and implies deep-sleep capability. + + "fsl,mpc8548-pmc" should be listed for any chip whose PMC is + compatible. "fsl,mpc8536-pmc" should also be listed for any chip + whose PMC is compatible, and implies deep-sleep capability. + + "fsl,mpc8641d-pmc" should be listed for any chip whose PMC is + compatible; all statements below that apply to "fsl,mpc8548-pmc" also + apply to "fsl,mpc8641d-pmc". + + Compatibility does not include bit assignments in SCCR/PMCDR/DEVDISR; these + bit assignments are indicated via the sleep specifier in each device's + sleep property. + +- reg: For devices compatible with "fsl,mpc8349-pmc", the first resource + is the PMC block, and the second resource is the Clock Configuration + block. + + For devices compatible with "fsl,mpc8548-pmc", the first resource + is a 32-byte block beginning with DEVDISR. + +- interrupts: For "fsl,mpc8349-pmc"-compatible devices, the first + resource is the PMC block interrupt. + +- fsl,mpc8313-wakeup-timer: For "fsl,mpc8313-pmc"-compatible devices, + this is a phandle to an "fsl,gtm" node on which timer 4 can be used as + a wakeup source from deep sleep. + +Sleep specifiers: + + fsl,mpc8349-pmc: Sleep specifiers consist of one cell. For each bit + that is set in the cell, the corresponding bit in SCCR will be saved + and cleared on suspend, and restored on resume. This sleep controller + supports disabling and resuming devices at any time. + + fsl,mpc8536-pmc: Sleep specifiers consist of three cells, the third of + which will be ORed into PMCDR upon suspend, and cleared from PMCDR + upon resume. The first two cells are as described for fsl,mpc8578-pmc. + This sleep controller only supports disabling devices during system + sleep, or permanently. + + fsl,mpc8548-pmc: Sleep specifiers consist of one or two cells, the + first of which will be ORed into DEVDISR (and the second into + DEVDISR2, if present -- this cell should be zero or absent if the + hardware does not have DEVDISR2) upon a request for permanent device + disabling. This sleep controller does not support configuring devices + to disable during system sleep (unless supported by another compatible + match), or dynamically. + +Example: + + power@b00 { + compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 8>; + }; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/sec.txt b/Documentation/devicetree/bindings/powerpc/fsl/sec.txt new file mode 100644 index 00000000000..2b6f2d45c45 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/sec.txt @@ -0,0 +1,68 @@ +Freescale SoC SEC Security Engines + +Required properties: + +- compatible : Should contain entries for this and backward compatible + SEC versions, high to low, e.g., "fsl,sec2.1", "fsl,sec2.0" +- reg : Offset and length of the register set for the device +- interrupts : the SEC's interrupt number +- fsl,num-channels : An integer representing the number of channels + available. +- fsl,channel-fifo-len : An integer representing the number of + descriptor pointers each channel fetch fifo can hold. +- fsl,exec-units-mask : The bitmask representing what execution units + (EUs) are available. It's a single 32-bit cell. EU information + should be encoded following the SEC's Descriptor Header Dword + EU_SEL0 field documentation, i.e. as follows: + + bit 0 = reserved - should be 0 + bit 1 = set if SEC has the ARC4 EU (AFEU) + bit 2 = set if SEC has the DES/3DES EU (DEU) + bit 3 = set if SEC has the message digest EU (MDEU/MDEU-A) + bit 4 = set if SEC has the random number generator EU (RNG) + bit 5 = set if SEC has the public key EU (PKEU) + bit 6 = set if SEC has the AES EU (AESU) + bit 7 = set if SEC has the Kasumi EU (KEU) + bit 8 = set if SEC has the CRC EU (CRCU) + bit 11 = set if SEC has the message digest EU extended alg set (MDEU-B) + +remaining bits are reserved for future SEC EUs. + +- fsl,descriptor-types-mask : The bitmask representing what descriptors + are available. It's a single 32-bit cell. Descriptor type information + should be encoded following the SEC's Descriptor Header Dword DESC_TYPE + field documentation, i.e. as follows: + + bit 0 = set if SEC supports the aesu_ctr_nonsnoop desc. type + bit 1 = set if SEC supports the ipsec_esp descriptor type + bit 2 = set if SEC supports the common_nonsnoop desc. type + bit 3 = set if SEC supports the 802.11i AES ccmp desc. type + bit 4 = set if SEC supports the hmac_snoop_no_afeu desc. type + bit 5 = set if SEC supports the srtp descriptor type + bit 6 = set if SEC supports the non_hmac_snoop_no_afeu desc.type + bit 7 = set if SEC supports the pkeu_assemble descriptor type + bit 8 = set if SEC supports the aesu_key_expand_output desc.type + bit 9 = set if SEC supports the pkeu_ptmul descriptor type + bit 10 = set if SEC supports the common_nonsnoop_afeu desc. type + bit 11 = set if SEC supports the pkeu_ptadd_dbl descriptor type + + ..and so on and so forth. + +Optional properties: + +- interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. + +Example: + + /* MPC8548E */ + crypto@30000 { + compatible = "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <29 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0xfe>; + fsl,descriptor-types-mask = <0x12b0ebf>; + }; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/ssi.txt b/Documentation/devicetree/bindings/powerpc/fsl/ssi.txt new file mode 100644 index 00000000000..5ff76c9c57d --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/ssi.txt @@ -0,0 +1,73 @@ +Freescale Synchronous Serial Interface + +The SSI is a serial device that communicates with audio codecs. It can +be programmed in AC97, I2S, left-justified, or right-justified modes. + +Required properties: +- compatible: Compatible list, contains "fsl,ssi". +- cell-index: The SSI, <0> = SSI1, <1> = SSI2, and so on. +- reg: Offset and length of the register set for the device. +- interrupts: where a is the interrupt number and b is a + field that represents an encoding of the sense and + level information for the interrupt. This should be + encoded based on the information in section 2) + depending on the type of interrupt controller you + have. +- interrupt-parent: The phandle for the interrupt controller that + services interrupts for this device. +- fsl,mode: The operating mode for the SSI interface. + "i2s-slave" - I2S mode, SSI is clock slave + "i2s-master" - I2S mode, SSI is clock master + "lj-slave" - left-justified mode, SSI is clock slave + "lj-master" - l.j. mode, SSI is clock master + "rj-slave" - right-justified mode, SSI is clock slave + "rj-master" - r.j., SSI is clock master + "ac97-slave" - AC97 mode, SSI is clock slave + "ac97-master" - AC97 mode, SSI is clock master +- fsl,playback-dma: Phandle to a node for the DMA channel to use for + playback of audio. This is typically dictated by SOC + design. See the notes below. +- fsl,capture-dma: Phandle to a node for the DMA channel to use for + capture (recording) of audio. This is typically dictated + by SOC design. See the notes below. +- fsl,fifo-depth: The number of elements in the transmit and receive FIFOs. + This number is the maximum allowed value for SFCSR[TFWM0]. +- fsl,ssi-asynchronous: + If specified, the SSI is to be programmed in asynchronous + mode. In this mode, pins SRCK, STCK, SRFS, and STFS must + all be connected to valid signals. In synchronous mode, + SRCK and SRFS are ignored. Asynchronous mode allows + playback and capture to use different sample sizes and + sample rates. Some drivers may require that SRCK and STCK + be connected together, and SRFS and STFS be connected + together. This would still allow different sample sizes, + but not different sample rates. + +Optional properties: +- codec-handle: Phandle to a 'codec' node that defines an audio + codec connected to this SSI. This node is typically + a child of an I2C or other control node. + +Child 'codec' node required properties: +- compatible: Compatible list, contains the name of the codec + +Child 'codec' node optional properties: +- clock-frequency: The frequency of the input clock, which typically comes + from an on-board dedicated oscillator. + +Notes on fsl,playback-dma and fsl,capture-dma: + +On SOCs that have an SSI, specific DMA channels are hard-wired for playback +and capture. On the MPC8610, for example, SSI1 must use DMA channel 0 for +playback and DMA channel 1 for capture. SSI2 must use DMA channel 2 for +playback and DMA channel 3 for capture. The developer can choose which +DMA controller to use, but the channels themselves are hard-wired. The +purpose of these two properties is to represent this hardware design. + +The device tree nodes for the DMA channels that are referenced by +"fsl,playback-dma" and "fsl,capture-dma" must be marked as compatible with +"fsl,ssi-dma-channel". The SOC-specific compatible string (e.g. +"fsl,mpc8610-dma-channel") can remain. If these nodes are left as +"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel", then the generic Elo DMA +drivers (fsldma) will attempt to use them, and it will conflict with the +sound drivers. diff --git a/Documentation/devicetree/bindings/powerpc/nintendo/gamecube.txt b/Documentation/devicetree/bindings/powerpc/nintendo/gamecube.txt new file mode 100644 index 00000000000..b558585b1aa --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/nintendo/gamecube.txt @@ -0,0 +1,109 @@ + +Nintendo GameCube device tree +============================= + +1) The "flipper" node + + This node represents the multi-function "Flipper" chip, which packages + many of the devices found in the Nintendo GameCube. + + Required properties: + + - compatible : Should be "nintendo,flipper" + +1.a) The Video Interface (VI) node + + Represents the interface between the graphics processor and a external + video encoder. + + Required properties: + + - compatible : should be "nintendo,flipper-vi" + - reg : should contain the VI registers location and length + - interrupts : should contain the VI interrupt + +1.b) The Processor Interface (PI) node + + Represents the data and control interface between the main processor + and graphics and audio processor. + + Required properties: + + - compatible : should be "nintendo,flipper-pi" + - reg : should contain the PI registers location and length + +1.b.i) The "Flipper" interrupt controller node + + Represents the interrupt controller within the "Flipper" chip. + The node for the "Flipper" interrupt controller must be placed under + the PI node. + + Required properties: + + - compatible : should be "nintendo,flipper-pic" + +1.c) The Digital Signal Procesor (DSP) node + + Represents the digital signal processor interface, designed to offload + audio related tasks. + + Required properties: + + - compatible : should be "nintendo,flipper-dsp" + - reg : should contain the DSP registers location and length + - interrupts : should contain the DSP interrupt + +1.c.i) The Auxiliary RAM (ARAM) node + + Represents the non cpu-addressable ram designed mainly to store audio + related information. + The ARAM node must be placed under the DSP node. + + Required properties: + + - compatible : should be "nintendo,flipper-aram" + - reg : should contain the ARAM start (zero-based) and length + +1.d) The Disk Interface (DI) node + + Represents the interface used to communicate with mass storage devices. + + Required properties: + + - compatible : should be "nintendo,flipper-di" + - reg : should contain the DI registers location and length + - interrupts : should contain the DI interrupt + +1.e) The Audio Interface (AI) node + + Represents the interface to the external 16-bit stereo digital-to-analog + converter. + + Required properties: + + - compatible : should be "nintendo,flipper-ai" + - reg : should contain the AI registers location and length + - interrupts : should contain the AI interrupt + +1.f) The Serial Interface (SI) node + + Represents the interface to the four single bit serial interfaces. + The SI is a proprietary serial interface used normally to control gamepads. + It's NOT a RS232-type interface. + + Required properties: + + - compatible : should be "nintendo,flipper-si" + - reg : should contain the SI registers location and length + - interrupts : should contain the SI interrupt + +1.g) The External Interface (EXI) node + + Represents the multi-channel SPI-like interface. + + Required properties: + + - compatible : should be "nintendo,flipper-exi" + - reg : should contain the EXI registers location and length + - interrupts : should contain the EXI interrupt + diff --git a/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt b/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt new file mode 100644 index 00000000000..a7e155a023b --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt @@ -0,0 +1,184 @@ + +Nintendo Wii device tree +======================== + +0) The root node + + This node represents the Nintendo Wii video game console. + + Required properties: + + - model : Should be "nintendo,wii" + - compatible : Should be "nintendo,wii" + +1) The "hollywood" node + + This node represents the multi-function "Hollywood" chip, which packages + many of the devices found in the Nintendo Wii. + + Required properties: + + - compatible : Should be "nintendo,hollywood" + +1.a) The Video Interface (VI) node + + Represents the interface between the graphics processor and a external + video encoder. + + Required properties: + + - compatible : should be "nintendo,hollywood-vi","nintendo,flipper-vi" + - reg : should contain the VI registers location and length + - interrupts : should contain the VI interrupt + +1.b) The Processor Interface (PI) node + + Represents the data and control interface between the main processor + and graphics and audio processor. + + Required properties: + + - compatible : should be "nintendo,hollywood-pi","nintendo,flipper-pi" + - reg : should contain the PI registers location and length + +1.b.i) The "Flipper" interrupt controller node + + Represents the "Flipper" interrupt controller within the "Hollywood" chip. + The node for the "Flipper" interrupt controller must be placed under + the PI node. + + Required properties: + + - #interrupt-cells : <1> + - compatible : should be "nintendo,flipper-pic" + - interrupt-controller + +1.c) The Digital Signal Procesor (DSP) node + + Represents the digital signal processor interface, designed to offload + audio related tasks. + + Required properties: + + - compatible : should be "nintendo,hollywood-dsp","nintendo,flipper-dsp" + - reg : should contain the DSP registers location and length + - interrupts : should contain the DSP interrupt + +1.d) The Serial Interface (SI) node + + Represents the interface to the four single bit serial interfaces. + The SI is a proprietary serial interface used normally to control gamepads. + It's NOT a RS232-type interface. + + Required properties: + + - compatible : should be "nintendo,hollywood-si","nintendo,flipper-si" + - reg : should contain the SI registers location and length + - interrupts : should contain the SI interrupt + +1.e) The Audio Interface (AI) node + + Represents the interface to the external 16-bit stereo digital-to-analog + converter. + + Required properties: + + - compatible : should be "nintendo,hollywood-ai","nintendo,flipper-ai" + - reg : should contain the AI registers location and length + - interrupts : should contain the AI interrupt + +1.f) The External Interface (EXI) node + + Represents the multi-channel SPI-like interface. + + Required properties: + + - compatible : should be "nintendo,hollywood-exi","nintendo,flipper-exi" + - reg : should contain the EXI registers location and length + - interrupts : should contain the EXI interrupt + +1.g) The Open Host Controller Interface (OHCI) nodes + + Represent the USB 1.x Open Host Controller Interfaces. + + Required properties: + + - compatible : should be "nintendo,hollywood-usb-ohci","usb-ohci" + - reg : should contain the OHCI registers location and length + - interrupts : should contain the OHCI interrupt + +1.h) The Enhanced Host Controller Interface (EHCI) node + + Represents the USB 2.0 Enhanced Host Controller Interface. + + Required properties: + + - compatible : should be "nintendo,hollywood-usb-ehci","usb-ehci" + - reg : should contain the EHCI registers location and length + - interrupts : should contain the EHCI interrupt + +1.i) The Secure Digital Host Controller Interface (SDHCI) nodes + + Represent the Secure Digital Host Controller Interfaces. + + Required properties: + + - compatible : should be "nintendo,hollywood-sdhci","sdhci" + - reg : should contain the SDHCI registers location and length + - interrupts : should contain the SDHCI interrupt + +1.j) The Inter-Processsor Communication (IPC) node + + Represent the Inter-Processor Communication interface. This interface + enables communications between the Broadway and the Starlet processors. + + - compatible : should be "nintendo,hollywood-ipc" + - reg : should contain the IPC registers location and length + - interrupts : should contain the IPC interrupt + +1.k) The "Hollywood" interrupt controller node + + Represents the "Hollywood" interrupt controller within the + "Hollywood" chip. + + Required properties: + + - #interrupt-cells : <1> + - compatible : should be "nintendo,hollywood-pic" + - reg : should contain the controller registers location and length + - interrupt-controller + - interrupts : should contain the cascade interrupt of the "flipper" pic + - interrupt-parent: should contain the phandle of the "flipper" pic + +1.l) The General Purpose I/O (GPIO) controller node + + Represents the dual access 32 GPIO controller interface. + + Required properties: + + - #gpio-cells : <2> + - compatible : should be "nintendo,hollywood-gpio" + - reg : should contain the IPC registers location and length + - gpio-controller + +1.m) The control node + + Represents the control interface used to setup several miscellaneous + settings of the "Hollywood" chip like boot memory mappings, resets, + disk interface mode, etc. + + Required properties: + + - compatible : should be "nintendo,hollywood-control" + - reg : should contain the control registers location and length + +1.n) The Disk Interface (DI) node + + Represents the interface used to communicate with mass storage devices. + + Required properties: + + - compatible : should be "nintendo,hollywood-di" + - reg : should contain the DI registers location and length + - interrupts : should contain the DI interrupt + diff --git a/Documentation/devicetree/bindings/spi/fsl-spi.txt b/Documentation/devicetree/bindings/spi/fsl-spi.txt new file mode 100644 index 00000000000..777abd7399d --- /dev/null +++ b/Documentation/devicetree/bindings/spi/fsl-spi.txt @@ -0,0 +1,53 @@ +* SPI (Serial Peripheral Interface) + +Required properties: +- cell-index : QE SPI subblock index. + 0: QE subblock SPI1 + 1: QE subblock SPI2 +- compatible : should be "fsl,spi". +- mode : the SPI operation mode, it can be "cpu" or "cpu-qe". +- reg : Offset and length of the register set for the device +- interrupts : where a is the interrupt number and b is a + field that represents an encoding of the sense and level + information for the interrupt. This should be encoded based on + the information in section 2) depending on the type of interrupt + controller you have. +- interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. + +Optional properties: +- gpios : specifies the gpio pins to be used for chipselects. + The gpios will be referred to as reg = in the SPI child nodes. + If unspecified, a single SPI device without a chip select can be used. + +Example: + spi@4c0 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <4c0 40>; + interrupts = <82 0>; + interrupt-parent = <700>; + mode = "cpu"; + gpios = <&gpio 18 1 // device reg=<0> + &gpio 19 1>; // device reg=<1> + }; + + +* eSPI (Enhanced Serial Peripheral Interface) + +Required properties: +- compatible : should be "fsl,mpc8536-espi". +- reg : Offset and length of the register set for the device. +- interrupts : should contain eSPI interrupt, the device has one interrupt. +- fsl,espi-num-chipselects : the number of the chipselect signals. + +Example: + spi@110000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8536-espi"; + reg = <0x110000 0x1000>; + interrupts = <53 0x2>; + interrupt-parent = <&mpic>; + fsl,espi-num-chipselects = <4>; + }; diff --git a/Documentation/devicetree/bindings/spi/spi-bus.txt b/Documentation/devicetree/bindings/spi/spi-bus.txt new file mode 100644 index 00000000000..e782add2e45 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-bus.txt @@ -0,0 +1,57 @@ +SPI (Serial Peripheral Interface) busses + +SPI busses can be described with a node for the SPI master device +and a set of child nodes for each SPI slave on the bus. For this +discussion, it is assumed that the system's SPI controller is in +SPI master mode. This binding does not describe SPI controllers +in slave mode. + +The SPI master node requires the following properties: +- #address-cells - number of cells required to define a chip select + address on the SPI bus. +- #size-cells - should be zero. +- compatible - name of SPI bus controller following generic names + recommended practice. +No other properties are required in the SPI bus node. It is assumed +that a driver for an SPI bus device will understand that it is an SPI bus. +However, the binding does not attempt to define the specific method for +assigning chip select numbers. Since SPI chip select configuration is +flexible and non-standardized, it is left out of this binding with the +assumption that board specific platform code will be used to manage +chip selects. Individual drivers can define additional properties to +support describing the chip select layout. + +SPI slave nodes must be children of the SPI master node and can +contain the following properties. +- reg - (required) chip select address of device. +- compatible - (required) name of SPI device following generic names + recommended practice +- spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz +- spi-cpol - (optional) Empty property indicating device requires + inverse clock polarity (CPOL) mode +- spi-cpha - (optional) Empty property indicating device requires + shifted clock phase (CPHA) mode +- spi-cs-high - (optional) Empty property indicating device requires + chip select active high + +SPI example for an MPC5200 SPI bus: + spi@f00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; + reg = <0xf00 0x20>; + interrupts = <2 13 0 2 14 0>; + interrupt-parent = <&mpc5200_pic>; + + ethernet-switch@0 { + compatible = "micrel,ks8995m"; + spi-max-frequency = <1000000>; + reg = <0>; + }; + + codec@1 { + compatible = "ti,tlv320aic26"; + spi-max-frequency = <100000>; + reg = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/fsl-usb.txt b/Documentation/devicetree/bindings/usb/fsl-usb.txt new file mode 100644 index 00000000000..bd5723f0b67 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/fsl-usb.txt @@ -0,0 +1,81 @@ +Freescale SOC USB controllers + +The device node for a USB controller that is part of a Freescale +SOC is as described in the document "Open Firmware Recommended +Practice : Universal Serial Bus" with the following modifications +and additions : + +Required properties : + - compatible : Should be "fsl-usb2-mph" for multi port host USB + controllers, or "fsl-usb2-dr" for dual role USB controllers + or "fsl,mpc5121-usb2-dr" for dual role USB controllers of MPC5121 + - phy_type : For multi port host USB controllers, should be one of + "ulpi", or "serial". For dual role USB controllers, should be + one of "ulpi", "utmi", "utmi_wide", or "serial". + - reg : Offset and length of the register set for the device + - port0 : boolean; if defined, indicates port0 is connected for + fsl-usb2-mph compatible controllers. Either this property or + "port1" (or both) must be defined for "fsl-usb2-mph" compatible + controllers. + - port1 : boolean; if defined, indicates port1 is connected for + fsl-usb2-mph compatible controllers. Either this property or + "port0" (or both) must be defined for "fsl-usb2-mph" compatible + controllers. + - dr_mode : indicates the working mode for "fsl-usb2-dr" compatible + controllers. Can be "host", "peripheral", or "otg". Default to + "host" if not defined for backward compatibility. + +Recommended properties : + - interrupts : where a is the interrupt number and b is a + field that represents an encoding of the sense and level + information for the interrupt. This should be encoded based on + the information in section 2) depending on the type of interrupt + controller you have. + - interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. + +Optional properties : + - fsl,invert-drvvbus : boolean; for MPC5121 USB0 only. Indicates the + port power polarity of internal PHY signal DRVVBUS is inverted. + - fsl,invert-pwr-fault : boolean; for MPC5121 USB0 only. Indicates + the PWR_FAULT signal polarity is inverted. + +Example multi port host USB controller device node : + usb@22000 { + compatible = "fsl-usb2-mph"; + reg = <22000 1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <700>; + interrupts = <27 1>; + phy_type = "ulpi"; + port0; + port1; + }; + +Example dual role USB controller device node : + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <23000 1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <700>; + interrupts = <26 1>; + dr_mode = "otg"; + phy = "ulpi"; + }; + +Example dual role USB controller device node for MPC5121ADS: + + usb@4000 { + compatible = "fsl,mpc5121-usb2-dr"; + reg = <0x4000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = < &ipic >; + interrupts = <44 0x8>; + dr_mode = "otg"; + phy_type = "utmi_wide"; + fsl,invert-drvvbus; + fsl,invert-pwr-fault; + }; diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt new file mode 100644 index 00000000000..fa18612f757 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt @@ -0,0 +1,25 @@ +USB EHCI controllers + +Required properties: + - compatible : should be "usb-ehci". + - reg : should contain at least address and length of the standard EHCI + register set for the device. Optional platform-dependent registers + (debug-port or other) can be also specified here, but only after + definition of standard EHCI registers. + - interrupts : one EHCI interrupt should be described here. +If device registers are implemented in big endian mode, the device +node should have "big-endian-regs" property. +If controller implementation operates with big endian descriptors, +"big-endian-desc" property should be specified. +If both big endian registers and descriptors are used by the controller +implementation, "big-endian" property can be specified instead of having +both "big-endian-regs" and "big-endian-desc". + +Example (Sequoia 440EPx): + ehci@e0000300 { + compatible = "ibm,usb-ehci-440epx", "usb-ehci"; + interrupt-parent = <&UIC0>; + interrupts = <1a 4>; + reg = <0 e0000300 90 0 e0000390 70>; + big-endian; + }; diff --git a/Documentation/devicetree/bindings/xilinx.txt b/Documentation/devicetree/bindings/xilinx.txt new file mode 100644 index 00000000000..299d0923537 --- /dev/null +++ b/Documentation/devicetree/bindings/xilinx.txt @@ -0,0 +1,306 @@ + d) Xilinx IP cores + + The Xilinx EDK toolchain ships with a set of IP cores (devices) for use + in Xilinx Spartan and Virtex FPGAs. The devices cover the whole range + of standard device types (network, serial, etc.) and miscellaneous + devices (gpio, LCD, spi, etc). Also, since these devices are + implemented within the fpga fabric every instance of the device can be + synthesised with different options that change the behaviour. + + Each IP-core has a set of parameters which the FPGA designer can use to + control how the core is synthesized. Historically, the EDK tool would + extract the device parameters relevant to device drivers and copy them + into an 'xparameters.h' in the form of #define symbols. This tells the + device drivers how the IP cores are configured, but it requires the kernel + to be recompiled every time the FPGA bitstream is resynthesized. + + The new approach is to export the parameters into the device tree and + generate a new device tree each time the FPGA bitstream changes. The + parameters which used to be exported as #defines will now become + properties of the device node. In general, device nodes for IP-cores + will take the following form: + + (name): (generic-name)@(base-address) { + compatible = "xlnx,(ip-core-name)-(HW_VER)" + [, (list of compatible devices), ...]; + reg = <(baseaddr) (size)>; + interrupt-parent = <&interrupt-controller-phandle>; + interrupts = < ... >; + xlnx,(parameter1) = "(string-value)"; + xlnx,(parameter2) = <(int-value)>; + }; + + (generic-name): an open firmware-style name that describes the + generic class of device. Preferably, this is one word, such + as 'serial' or 'ethernet'. + (ip-core-name): the name of the ip block (given after the BEGIN + directive in system.mhs). Should be in lowercase + and all underscores '_' converted to dashes '-'. + (name): is derived from the "PARAMETER INSTANCE" value. + (parameter#): C_* parameters from system.mhs. The C_ prefix is + dropped from the parameter name, the name is converted + to lowercase and all underscore '_' characters are + converted to dashes '-'. + (baseaddr): the baseaddr parameter value (often named C_BASEADDR). + (HW_VER): from the HW_VER parameter. + (size): the address range size (often C_HIGHADDR - C_BASEADDR + 1). + + Typically, the compatible list will include the exact IP core version + followed by an older IP core version which implements the same + interface or any other device with the same interface. + + 'reg', 'interrupt-parent' and 'interrupts' are all optional properties. + + For example, the following block from system.mhs: + + BEGIN opb_uartlite + PARAMETER INSTANCE = opb_uartlite_0 + PARAMETER HW_VER = 1.00.b + PARAMETER C_BAUDRATE = 115200 + PARAMETER C_DATA_BITS = 8 + PARAMETER C_ODD_PARITY = 0 + PARAMETER C_USE_PARITY = 0 + PARAMETER C_CLK_FREQ = 50000000 + PARAMETER C_BASEADDR = 0xEC100000 + PARAMETER C_HIGHADDR = 0xEC10FFFF + BUS_INTERFACE SOPB = opb_7 + PORT OPB_Clk = CLK_50MHz + PORT Interrupt = opb_uartlite_0_Interrupt + PORT RX = opb_uartlite_0_RX + PORT TX = opb_uartlite_0_TX + PORT OPB_Rst = sys_bus_reset_0 + END + + becomes the following device tree node: + + opb_uartlite_0: serial@ec100000 { + device_type = "serial"; + compatible = "xlnx,opb-uartlite-1.00.b"; + reg = ; + interrupt-parent = <&opb_intc_0>; + interrupts = <1 0>; // got this from the opb_intc parameters + current-speed = ; // standard serial device prop + clock-frequency = ; // standard serial device prop + xlnx,data-bits = <8>; + xlnx,odd-parity = <0>; + xlnx,use-parity = <0>; + }; + + Some IP cores actually implement 2 or more logical devices. In + this case, the device should still describe the whole IP core with + a single node and add a child node for each logical device. The + ranges property can be used to translate from parent IP-core to the + registers of each device. In addition, the parent node should be + compatible with the bus type 'xlnx,compound', and should contain + #address-cells and #size-cells, as with any other bus. (Note: this + makes the assumption that both logical devices have the same bus + binding. If this is not true, then separate nodes should be used + for each logical device). The 'cell-index' property can be used to + enumerate logical devices within an IP core. For example, the + following is the system.mhs entry for the dual ps2 controller found + on the ml403 reference design. + + BEGIN opb_ps2_dual_ref + PARAMETER INSTANCE = opb_ps2_dual_ref_0 + PARAMETER HW_VER = 1.00.a + PARAMETER C_BASEADDR = 0xA9000000 + PARAMETER C_HIGHADDR = 0xA9001FFF + BUS_INTERFACE SOPB = opb_v20_0 + PORT Sys_Intr1 = ps2_1_intr + PORT Sys_Intr2 = ps2_2_intr + PORT Clkin1 = ps2_clk_rx_1 + PORT Clkin2 = ps2_clk_rx_2 + PORT Clkpd1 = ps2_clk_tx_1 + PORT Clkpd2 = ps2_clk_tx_2 + PORT Rx1 = ps2_d_rx_1 + PORT Rx2 = ps2_d_rx_2 + PORT Txpd1 = ps2_d_tx_1 + PORT Txpd2 = ps2_d_tx_2 + END + + It would result in the following device tree nodes: + + opb_ps2_dual_ref_0: opb-ps2-dual-ref@a9000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,compound"; + ranges = <0 a9000000 2000>; + // If this device had extra parameters, then they would + // go here. + ps2@0 { + compatible = "xlnx,opb-ps2-dual-ref-1.00.a"; + reg = <0 40>; + interrupt-parent = <&opb_intc_0>; + interrupts = <3 0>; + cell-index = <0>; + }; + ps2@1000 { + compatible = "xlnx,opb-ps2-dual-ref-1.00.a"; + reg = <1000 40>; + interrupt-parent = <&opb_intc_0>; + interrupts = <3 0>; + cell-index = <0>; + }; + }; + + Also, the system.mhs file defines bus attachments from the processor + to the devices. The device tree structure should reflect the bus + attachments. Again an example; this system.mhs fragment: + + BEGIN ppc405_virtex4 + PARAMETER INSTANCE = ppc405_0 + PARAMETER HW_VER = 1.01.a + BUS_INTERFACE DPLB = plb_v34_0 + BUS_INTERFACE IPLB = plb_v34_0 + END + + BEGIN opb_intc + PARAMETER INSTANCE = opb_intc_0 + PARAMETER HW_VER = 1.00.c + PARAMETER C_BASEADDR = 0xD1000FC0 + PARAMETER C_HIGHADDR = 0xD1000FDF + BUS_INTERFACE SOPB = opb_v20_0 + END + + BEGIN opb_uart16550 + PARAMETER INSTANCE = opb_uart16550_0 + PARAMETER HW_VER = 1.00.d + PARAMETER C_BASEADDR = 0xa0000000 + PARAMETER C_HIGHADDR = 0xa0001FFF + BUS_INTERFACE SOPB = opb_v20_0 + END + + BEGIN plb_v34 + PARAMETER INSTANCE = plb_v34_0 + PARAMETER HW_VER = 1.02.a + END + + BEGIN plb_bram_if_cntlr + PARAMETER INSTANCE = plb_bram_if_cntlr_0 + PARAMETER HW_VER = 1.00.b + PARAMETER C_BASEADDR = 0xFFFF0000 + PARAMETER C_HIGHADDR = 0xFFFFFFFF + BUS_INTERFACE SPLB = plb_v34_0 + END + + BEGIN plb2opb_bridge + PARAMETER INSTANCE = plb2opb_bridge_0 + PARAMETER HW_VER = 1.01.a + PARAMETER C_RNG0_BASEADDR = 0x20000000 + PARAMETER C_RNG0_HIGHADDR = 0x3FFFFFFF + PARAMETER C_RNG1_BASEADDR = 0x60000000 + PARAMETER C_RNG1_HIGHADDR = 0x7FFFFFFF + PARAMETER C_RNG2_BASEADDR = 0x80000000 + PARAMETER C_RNG2_HIGHADDR = 0xBFFFFFFF + PARAMETER C_RNG3_BASEADDR = 0xC0000000 + PARAMETER C_RNG3_HIGHADDR = 0xDFFFFFFF + BUS_INTERFACE SPLB = plb_v34_0 + BUS_INTERFACE MOPB = opb_v20_0 + END + + Gives this device tree (some properties removed for clarity): + + plb@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,plb-v34-1.02.a"; + device_type = "ibm,plb"; + ranges; // 1:1 translation + + plb_bram_if_cntrl_0: bram@ffff0000 { + reg = ; + } + + opb@20000000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <20000000 20000000 20000000 + 60000000 60000000 20000000 + 80000000 80000000 40000000 + c0000000 c0000000 20000000>; + + opb_uart16550_0: serial@a0000000 { + reg = ; + }; + + opb_intc_0: interrupt-controller@d1000fc0 { + reg = ; + }; + }; + }; + + That covers the general approach to binding xilinx IP cores into the + device tree. The following are bindings for specific devices: + + i) Xilinx ML300 Framebuffer + + Simple framebuffer device from the ML300 reference design (also on the + ML403 reference design as well as others). + + Optional properties: + - resolution = : pixel resolution of framebuffer. Some + implementations use a different resolution. + Default is + - virt-resolution = : Size of framebuffer in memory. + Default is . + - rotate-display (empty) : rotate display 180 degrees. + + ii) Xilinx SystemACE + + The Xilinx SystemACE device is used to program FPGAs from an FPGA + bitstream stored on a CF card. It can also be used as a generic CF + interface device. + + Optional properties: + - 8-bit (empty) : Set this property for SystemACE in 8 bit mode + + iii) Xilinx EMAC and Xilinx TEMAC + + Xilinx Ethernet devices. In addition to general xilinx properties + listed above, nodes for these devices should include a phy-handle + property, and may include other common network device properties + like local-mac-address. + + iv) Xilinx Uartlite + + Xilinx uartlite devices are simple fixed speed serial ports. + + Required properties: + - current-speed : Baud rate of uartlite + + v) Xilinx hwicap + + Xilinx hwicap devices provide access to the configuration logic + of the FPGA through the Internal Configuration Access Port + (ICAP). The ICAP enables partial reconfiguration of the FPGA, + readback of the configuration information, and some control over + 'warm boots' of the FPGA fabric. + + Required properties: + - xlnx,family : The family of the FPGA, necessary since the + capabilities of the underlying ICAP hardware + differ between different families. May be + 'virtex2p', 'virtex4', or 'virtex5'. + + vi) Xilinx Uart 16550 + + Xilinx UART 16550 devices are very similar to the NS16550 but with + different register spacing and an offset from the base address. + + Required properties: + - clock-frequency : Frequency of the clock input + - reg-offset : A value of 3 is required + - reg-shift : A value of 2 is required + + vii) Xilinx USB Host controller + + The Xilinx USB host controller is EHCI compatible but with a different + base address for the EHCI registers, and it is always a big-endian + USB Host controller. The hardware can be configured as high speed only, + or high speed/full speed hybrid. + + Required properties: + - xlnx,support-usb-fs: A value 0 means the core is built as high speed + only. A value 1 means the core also supports + full speed devices. + diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt new file mode 100644 index 00000000000..7400d7555dc --- /dev/null +++ b/Documentation/devicetree/booting-without-of.txt @@ -0,0 +1,1447 @@ + Booting the Linux/ppc kernel without Open Firmware + -------------------------------------------------- + +(c) 2005 Benjamin Herrenschmidt , + IBM Corp. +(c) 2005 Becky Bruce , + Freescale Semiconductor, FSL SOC and 32-bit additions +(c) 2006 MontaVista Software, Inc. + Flash chip node definition + +Table of Contents +================= + + I - Introduction + 1) Entry point for arch/powerpc + 2) Board support + + II - The DT block format + 1) Header + 2) Device tree generalities + 3) Device tree "structure" block + 4) Device tree "strings" block + + III - Required content of the device tree + 1) Note about cells and address representation + 2) Note about "compatible" properties + 3) Note about "name" properties + 4) Note about node and property names and character set + 5) Required nodes and properties + a) The root node + b) The /cpus node + c) The /cpus/* nodes + d) the /memory node(s) + e) The /chosen node + f) the /soc node + + IV - "dtc", the device tree compiler + + V - Recommendations for a bootloader + + VI - System-on-a-chip devices and nodes + 1) Defining child nodes of an SOC + 2) Representing devices without a current OF specification + a) PHY nodes + b) Interrupt controllers + c) 4xx/Axon EMAC ethernet nodes + d) Xilinx IP cores + e) USB EHCI controllers + f) MDIO on GPIOs + g) SPI busses + + VII - Specifying interrupt information for devices + 1) interrupts property + 2) interrupt-parent property + 3) OpenPIC Interrupt Controllers + 4) ISA Interrupt Controllers + + VIII - Specifying device power management information (sleep property) + + Appendix A - Sample SOC node for MPC8540 + + +Revision Information +==================== + + May 18, 2005: Rev 0.1 - Initial draft, no chapter III yet. + + May 19, 2005: Rev 0.2 - Add chapter III and bits & pieces here or + clarifies the fact that a lot of things are + optional, the kernel only requires a very + small device tree, though it is encouraged + to provide an as complete one as possible. + + May 24, 2005: Rev 0.3 - Precise that DT block has to be in RAM + - Misc fixes + - Define version 3 and new format version 16 + for the DT block (version 16 needs kernel + patches, will be fwd separately). + String block now has a size, and full path + is replaced by unit name for more + compactness. + linux,phandle is made optional, only nodes + that are referenced by other nodes need it. + "name" property is now automatically + deduced from the unit name + + June 1, 2005: Rev 0.4 - Correct confusion between OF_DT_END and + OF_DT_END_NODE in structure definition. + - Change version 16 format to always align + property data to 4 bytes. Since tokens are + already aligned, that means no specific + required alignment between property size + and property data. The old style variable + alignment would make it impossible to do + "simple" insertion of properties using + memmove (thanks Milton for + noticing). Updated kernel patch as well + - Correct a few more alignment constraints + - Add a chapter about the device-tree + compiler and the textural representation of + the tree that can be "compiled" by dtc. + + November 21, 2005: Rev 0.5 + - Additions/generalizations for 32-bit + - Changed to reflect the new arch/powerpc + structure + - Added chapter VI + + + ToDo: + - Add some definitions of interrupt tree (simple/complex) + - Add some definitions for PCI host bridges + - Add some common address format examples + - Add definitions for standard properties and "compatible" + names for cells that are not already defined by the existing + OF spec. + - Compare FSL SOC use of PCI to standard and make sure no new + node definition required. + - Add more information about node definitions for SOC devices + that currently have no standard, like the FSL CPM. + + +I - Introduction +================ + +During the recent development of the Linux/ppc64 kernel, and more +specifically, the addition of new platform types outside of the old +IBM pSeries/iSeries pair, it was decided to enforce some strict rules +regarding the kernel entry and bootloader <-> kernel interfaces, in +order to avoid the degeneration that had become the ppc32 kernel entry +point and the way a new platform should be added to the kernel. The +legacy iSeries platform breaks those rules as it predates this scheme, +but no new board support will be accepted in the main tree that +doesn't follow them properly. In addition, since the advent of the +arch/powerpc merged architecture for ppc32 and ppc64, new 32-bit +platforms and 32-bit platforms which move into arch/powerpc will be +required to use these rules as well. + +The main requirement that will be defined in more detail below is +the presence of a device-tree whose format is defined after Open +Firmware specification. However, in order to make life easier +to embedded board vendors, the kernel doesn't require the device-tree +to represent every device in the system and only requires some nodes +and properties to be present. This will be described in detail in +section III, but, for example, the kernel does not require you to +create a node for every PCI device in the system. It is a requirement +to have a node for PCI host bridges in order to provide interrupt +routing informations and memory/IO ranges, among others. It is also +recommended to define nodes for on chip devices and other busses that +don't specifically fit in an existing OF specification. This creates a +great flexibility in the way the kernel can then probe those and match +drivers to device, without having to hard code all sorts of tables. It +also makes it more flexible for board vendors to do minor hardware +upgrades without significantly impacting the kernel code or cluttering +it with special cases. + + +1) Entry point for arch/powerpc +------------------------------- + + There is one and one single entry point to the kernel, at the start + of the kernel image. That entry point supports two calling + conventions: + + a) Boot from Open Firmware. If your firmware is compatible + with Open Firmware (IEEE 1275) or provides an OF compatible + client interface API (support for "interpret" callback of + forth words isn't required), you can enter the kernel with: + + r5 : OF callback pointer as defined by IEEE 1275 + bindings to powerpc. Only the 32-bit client interface + is currently supported + + r3, r4 : address & length of an initrd if any or 0 + + The MMU is either on or off; the kernel will run the + trampoline located in arch/powerpc/kernel/prom_init.c to + extract the device-tree and other information from open + firmware and build a flattened device-tree as described + in b). prom_init() will then re-enter the kernel using + the second method. This trampoline code runs in the + context of the firmware, which is supposed to handle all + exceptions during that time. + + b) Direct entry with a flattened device-tree block. This entry + point is called by a) after the OF trampoline and can also be + called directly by a bootloader that does not support the Open + Firmware client interface. It is also used by "kexec" to + implement "hot" booting of a new kernel from a previous + running one. This method is what I will describe in more + details in this document, as method a) is simply standard Open + Firmware, and thus should be implemented according to the + various standard documents defining it and its binding to the + PowerPC platform. The entry point definition then becomes: + + r3 : physical pointer to the device-tree block + (defined in chapter II) in RAM + + r4 : physical pointer to the kernel itself. This is + used by the assembly code to properly disable the MMU + in case you are entering the kernel with MMU enabled + and a non-1:1 mapping. + + r5 : NULL (as to differentiate with method a) + + Note about SMP entry: Either your firmware puts your other + CPUs in some sleep loop or spin loop in ROM where you can get + them out via a soft reset or some other means, in which case + you don't need to care, or you'll have to enter the kernel + with all CPUs. The way to do that with method b) will be + described in a later revision of this document. + + +2) Board support +---------------- + +64-bit kernels: + + Board supports (platforms) are not exclusive config options. An + arbitrary set of board supports can be built in a single kernel + image. The kernel will "know" what set of functions to use for a + given platform based on the content of the device-tree. Thus, you + should: + + a) add your platform support as a _boolean_ option in + arch/powerpc/Kconfig, following the example of PPC_PSERIES, + PPC_PMAC and PPC_MAPLE. The later is probably a good + example of a board support to start from. + + b) create your main platform file as + "arch/powerpc/platforms/myplatform/myboard_setup.c" and add it + to the Makefile under the condition of your CONFIG_ + option. This file will define a structure of type "ppc_md" + containing the various callbacks that the generic code will + use to get to your platform specific code + + c) Add a reference to your "ppc_md" structure in the + "machines" table in arch/powerpc/kernel/setup_64.c if you are + a 64-bit platform. + + d) request and get assigned a platform number (see PLATFORM_* + constants in arch/powerpc/include/asm/processor.h + +32-bit embedded kernels: + + Currently, board support is essentially an exclusive config option. + The kernel is configured for a single platform. Part of the reason + for this is to keep kernels on embedded systems small and efficient; + part of this is due to the fact the code is already that way. In the + future, a kernel may support multiple platforms, but only if the + platforms feature the same core architecture. A single kernel build + cannot support both configurations with Book E and configurations + with classic Powerpc architectures. + + 32-bit embedded platforms that are moved into arch/powerpc using a + flattened device tree should adopt the merged tree practice of + setting ppc_md up dynamically, even though the kernel is currently + built with support for only a single platform at a time. This allows + unification of the setup code, and will make it easier to go to a + multiple-platform-support model in the future. + +NOTE: I believe the above will be true once Ben's done with the merge +of the boot sequences.... someone speak up if this is wrong! + + To add a 32-bit embedded platform support, follow the instructions + for 64-bit platforms above, with the exception that the Kconfig + option should be set up such that the kernel builds exclusively for + the platform selected. The processor type for the platform should + enable another config option to select the specific board + supported. + +NOTE: If Ben doesn't merge the setup files, may need to change this to +point to setup_32.c + + + I will describe later the boot process and various callbacks that + your platform should implement. + + +II - The DT block format +======================== + + +This chapter defines the actual format of the flattened device-tree +passed to the kernel. The actual content of it and kernel requirements +are described later. You can find example of code manipulating that +format in various places, including arch/powerpc/kernel/prom_init.c +which will generate a flattened device-tree from the Open Firmware +representation, or the fs2dt utility which is part of the kexec tools +which will generate one from a filesystem representation. It is +expected that a bootloader like uboot provides a bit more support, +that will be discussed later as well. + +Note: The block has to be in main memory. It has to be accessible in +both real mode and virtual mode with no mapping other than main +memory. If you are writing a simple flash bootloader, it should copy +the block to RAM before passing it to the kernel. + + +1) Header +--------- + + The kernel is entered with r3 pointing to an area of memory that is + roughly described in arch/powerpc/include/asm/prom.h by the structure + boot_param_header: + +struct boot_param_header { + u32 magic; /* magic word OF_DT_HEADER */ + u32 totalsize; /* total size of DT block */ + u32 off_dt_struct; /* offset to structure */ + u32 off_dt_strings; /* offset to strings */ + u32 off_mem_rsvmap; /* offset to memory reserve map + */ + u32 version; /* format version */ + u32 last_comp_version; /* last compatible version */ + + /* version 2 fields below */ + u32 boot_cpuid_phys; /* Which physical CPU id we're + booting on */ + /* version 3 fields below */ + u32 size_dt_strings; /* size of the strings block */ + + /* version 17 fields below */ + u32 size_dt_struct; /* size of the DT structure block */ +}; + + Along with the constants: + +/* Definitions used by the flattened device tree */ +#define OF_DT_HEADER 0xd00dfeed /* 4: version, + 4: total size */ +#define OF_DT_BEGIN_NODE 0x1 /* Start node: full name + */ +#define OF_DT_END_NODE 0x2 /* End node */ +#define OF_DT_PROP 0x3 /* Property: name off, + size, content */ +#define OF_DT_END 0x9 + + All values in this header are in big endian format, the various + fields in this header are defined more precisely below. All + "offset" values are in bytes from the start of the header; that is + from the value of r3. + + - magic + + This is a magic value that "marks" the beginning of the + device-tree block header. It contains the value 0xd00dfeed and is + defined by the constant OF_DT_HEADER + + - totalsize + + This is the total size of the DT block including the header. The + "DT" block should enclose all data structures defined in this + chapter (who are pointed to by offsets in this header). That is, + the device-tree structure, strings, and the memory reserve map. + + - off_dt_struct + + This is an offset from the beginning of the header to the start + of the "structure" part the device tree. (see 2) device tree) + + - off_dt_strings + + This is an offset from the beginning of the header to the start + of the "strings" part of the device-tree + + - off_mem_rsvmap + + This is an offset from the beginning of the header to the start + of the reserved memory map. This map is a list of pairs of 64- + bit integers. Each pair is a physical address and a size. The + list is terminated by an entry of size 0. This map provides the + kernel with a list of physical memory areas that are "reserved" + and thus not to be used for memory allocations, especially during + early initialization. The kernel needs to allocate memory during + boot for things like un-flattening the device-tree, allocating an + MMU hash table, etc... Those allocations must be done in such a + way to avoid overriding critical things like, on Open Firmware + capable machines, the RTAS instance, or on some pSeries, the TCE + tables used for the iommu. Typically, the reserve map should + contain _at least_ this DT block itself (header,total_size). If + you are passing an initrd to the kernel, you should reserve it as + well. You do not need to reserve the kernel image itself. The map + should be 64-bit aligned. + + - version + + This is the version of this structure. Version 1 stops + here. Version 2 adds an additional field boot_cpuid_phys. + Version 3 adds the size of the strings block, allowing the kernel + to reallocate it easily at boot and free up the unused flattened + structure after expansion. Version 16 introduces a new more + "compact" format for the tree itself that is however not backward + compatible. Version 17 adds an additional field, size_dt_struct, + allowing it to be reallocated or moved more easily (this is + particularly useful for bootloaders which need to make + adjustments to a device tree based on probed information). You + should always generate a structure of the highest version defined + at the time of your implementation. Currently that is version 17, + unless you explicitly aim at being backward compatible. + + - last_comp_version + + Last compatible version. This indicates down to what version of + the DT block you are backward compatible. For example, version 2 + is backward compatible with version 1 (that is, a kernel build + for version 1 will be able to boot with a version 2 format). You + should put a 1 in this field if you generate a device tree of + version 1 to 3, or 16 if you generate a tree of version 16 or 17 + using the new unit name format. + + - boot_cpuid_phys + + This field only exist on version 2 headers. It indicate which + physical CPU ID is calling the kernel entry point. This is used, + among others, by kexec. If you are on an SMP system, this value + should match the content of the "reg" property of the CPU node in + the device-tree corresponding to the CPU calling the kernel entry + point (see further chapters for more informations on the required + device-tree contents) + + - size_dt_strings + + This field only exists on version 3 and later headers. It + gives the size of the "strings" section of the device tree (which + starts at the offset given by off_dt_strings). + + - size_dt_struct + + This field only exists on version 17 and later headers. It gives + the size of the "structure" section of the device tree (which + starts at the offset given by off_dt_struct). + + So the typical layout of a DT block (though the various parts don't + need to be in that order) looks like this (addresses go from top to + bottom): + + + ------------------------------ + r3 -> | struct boot_param_header | + ------------------------------ + | (alignment gap) (*) | + ------------------------------ + | memory reserve map | + ------------------------------ + | (alignment gap) | + ------------------------------ + | | + | device-tree structure | + | | + ------------------------------ + | (alignment gap) | + ------------------------------ + | | + | device-tree strings | + | | + -----> ------------------------------ + | + | + --- (r3 + totalsize) + + (*) The alignment gaps are not necessarily present; their presence + and size are dependent on the various alignment requirements of + the individual data blocks. + + +2) Device tree generalities +--------------------------- + +This device-tree itself is separated in two different blocks, a +structure block and a strings block. Both need to be aligned to a 4 +byte boundary. + +First, let's quickly describe the device-tree concept before detailing +the storage format. This chapter does _not_ describe the detail of the +required types of nodes & properties for the kernel, this is done +later in chapter III. + +The device-tree layout is strongly inherited from the definition of +the Open Firmware IEEE 1275 device-tree. It's basically a tree of +nodes, each node having two or more named properties. A property can +have a value or not. + +It is a tree, so each node has one and only one parent except for the +root node who has no parent. + +A node has 2 names. The actual node name is generally contained in a +property of type "name" in the node property list whose value is a +zero terminated string and is mandatory for version 1 to 3 of the +format definition (as it is in Open Firmware). Version 16 makes it +optional as it can generate it from the unit name defined below. + +There is also a "unit name" that is used to differentiate nodes with +the same name at the same level, it is usually made of the node +names, the "@" sign, and a "unit address", which definition is +specific to the bus type the node sits on. + +The unit name doesn't exist as a property per-se but is included in +the device-tree structure. It is typically used to represent "path" in +the device-tree. More details about the actual format of these will be +below. + +The kernel powerpc generic code does not make any formal use of the +unit address (though some board support code may do) so the only real +requirement here for the unit address is to ensure uniqueness of +the node unit name at a given level of the tree. Nodes with no notion +of address and no possible sibling of the same name (like /memory or +/cpus) may omit the unit address in the context of this specification, +or use the "@0" default unit address. The unit name is used to define +a node "full path", which is the concatenation of all parent node +unit names separated with "/". + +The root node doesn't have a defined name, and isn't required to have +a name property either if you are using version 3 or earlier of the +format. It also has no unit address (no @ symbol followed by a unit +address). The root node unit name is thus an empty string. The full +path to the root node is "/". + +Every node which actually represents an actual device (that is, a node +which isn't only a virtual "container" for more nodes, like "/cpus" +is) is also required to have a "device_type" property indicating the +type of node . + +Finally, every node that can be referenced from a property in another +node is required to have a "linux,phandle" property. Real open +firmware implementations provide a unique "phandle" value for every +node that the "prom_init()" trampoline code turns into +"linux,phandle" properties. However, this is made optional if the +flattened device tree is used directly. An example of a node +referencing another node via "phandle" is when laying out the +interrupt tree which will be described in a further version of this +document. + +This "linux, phandle" property is a 32-bit value that uniquely +identifies a node. You are free to use whatever values or system of +values, internal pointers, or whatever to generate these, the only +requirement is that every node for which you provide that property has +a unique value for it. + +Here is an example of a simple device-tree. In this example, an "o" +designates a node followed by the node unit name. Properties are +presented with their name followed by their content. "content" +represents an ASCII string (zero terminated) value, while +represents a 32-bit hexadecimal value. The various nodes in this +example will be discussed in a later chapter. At this point, it is +only meant to give you a idea of what a device-tree looks like. I have +purposefully kept the "name" and "linux,phandle" properties which +aren't necessary in order to give you a better idea of what the tree +looks like in practice. + + / o device-tree + |- name = "device-tree" + |- model = "MyBoardName" + |- compatible = "MyBoardFamilyName" + |- #address-cells = <2> + |- #size-cells = <2> + |- linux,phandle = <0> + | + o cpus + | | - name = "cpus" + | | - linux,phandle = <1> + | | - #address-cells = <1> + | | - #size-cells = <0> + | | + | o PowerPC,970@0 + | |- name = "PowerPC,970" + | |- device_type = "cpu" + | |- reg = <0> + | |- clock-frequency = <5f5e1000> + | |- 64-bit + | |- linux,phandle = <2> + | + o memory@0 + | |- name = "memory" + | |- device_type = "memory" + | |- reg = <00000000 00000000 00000000 20000000> + | |- linux,phandle = <3> + | + o chosen + |- name = "chosen" + |- bootargs = "root=/dev/sda2" + |- linux,phandle = <4> + +This tree is almost a minimal tree. It pretty much contains the +minimal set of required nodes and properties to boot a linux kernel; +that is, some basic model informations at the root, the CPUs, and the +physical memory layout. It also includes misc information passed +through /chosen, like in this example, the platform type (mandatory) +and the kernel command line arguments (optional). + +The /cpus/PowerPC,970@0/64-bit property is an example of a +property without a value. All other properties have a value. The +significance of the #address-cells and #size-cells properties will be +explained in chapter IV which defines precisely the required nodes and +properties and their content. + + +3) Device tree "structure" block + +The structure of the device tree is a linearized tree structure. The +"OF_DT_BEGIN_NODE" token starts a new node, and the "OF_DT_END_NODE" +ends that node definition. Child nodes are simply defined before +"OF_DT_END_NODE" (that is nodes within the node). A 'token' is a 32 +bit value. The tree has to be "finished" with a OF_DT_END token + +Here's the basic structure of a single node: + + * token OF_DT_BEGIN_NODE (that is 0x00000001) + * for version 1 to 3, this is the node full path as a zero + terminated string, starting with "/". For version 16 and later, + this is the node unit name only (or an empty string for the + root node) + * [align gap to next 4 bytes boundary] + * for each property: + * token OF_DT_PROP (that is 0x00000003) + * 32-bit value of property value size in bytes (or 0 if no + value) + * 32-bit value of offset in string block of property name + * property value data if any + * [align gap to next 4 bytes boundary] + * [child nodes if any] + * token OF_DT_END_NODE (that is 0x00000002) + +So the node content can be summarized as a start token, a full path, +a list of properties, a list of child nodes, and an end token. Every +child node is a full node structure itself as defined above. + +NOTE: The above definition requires that all property definitions for +a particular node MUST precede any subnode definitions for that node. +Although the structure would not be ambiguous if properties and +subnodes were intermingled, the kernel parser requires that the +properties come first (up until at least 2.6.22). Any tools +manipulating a flattened tree must take care to preserve this +constraint. + +4) Device tree "strings" block + +In order to save space, property names, which are generally redundant, +are stored separately in the "strings" block. This block is simply the +whole bunch of zero terminated strings for all property names +concatenated together. The device-tree property definitions in the +structure block will contain offset values from the beginning of the +strings block. + + +III - Required content of the device tree +========================================= + +WARNING: All "linux,*" properties defined in this document apply only +to a flattened device-tree. If your platform uses a real +implementation of Open Firmware or an implementation compatible with +the Open Firmware client interface, those properties will be created +by the trampoline code in the kernel's prom_init() file. For example, +that's where you'll have to add code to detect your board model and +set the platform number. However, when using the flattened device-tree +entry point, there is no prom_init() pass, and thus you have to +provide those properties yourself. + + +1) Note about cells and address representation +---------------------------------------------- + +The general rule is documented in the various Open Firmware +documentations. If you choose to describe a bus with the device-tree +and there exist an OF bus binding, then you should follow the +specification. However, the kernel does not require every single +device or bus to be described by the device tree. + +In general, the format of an address for a device is defined by the +parent bus type, based on the #address-cells and #size-cells +properties. Note that the parent's parent definitions of #address-cells +and #size-cells are not inherited so every node with children must specify +them. The kernel requires the root node to have those properties defining +addresses format for devices directly mapped on the processor bus. + +Those 2 properties define 'cells' for representing an address and a +size. A "cell" is a 32-bit number. For example, if both contain 2 +like the example tree given above, then an address and a size are both +composed of 2 cells, and each is a 64-bit number (cells are +concatenated and expected to be in big endian format). Another example +is the way Apple firmware defines them, with 2 cells for an address +and one cell for a size. Most 32-bit implementations should define +#address-cells and #size-cells to 1, which represents a 32-bit value. +Some 32-bit processors allow for physical addresses greater than 32 +bits; these processors should define #address-cells as 2. + +"reg" properties are always a tuple of the type "address size" where +the number of cells of address and size is specified by the bus +#address-cells and #size-cells. When a bus supports various address +spaces and other flags relative to a given address allocation (like +prefetchable, etc...) those flags are usually added to the top level +bits of the physical address. For example, a PCI physical address is +made of 3 cells, the bottom two containing the actual address itself +while the top cell contains address space indication, flags, and pci +bus & device numbers. + +For busses that support dynamic allocation, it's the accepted practice +to then not provide the address in "reg" (keep it 0) though while +providing a flag indicating the address is dynamically allocated, and +then, to provide a separate "assigned-addresses" property that +contains the fully allocated addresses. See the PCI OF bindings for +details. + +In general, a simple bus with no address space bits and no dynamic +allocation is preferred if it reflects your hardware, as the existing +kernel address parsing functions will work out of the box. If you +define a bus type with a more complex address format, including things +like address space bits, you'll have to add a bus translator to the +prom_parse.c file of the recent kernels for your bus type. + +The "reg" property only defines addresses and sizes (if #size-cells is +non-0) within a given bus. In order to translate addresses upward +(that is into parent bus addresses, and possibly into CPU physical +addresses), all busses must contain a "ranges" property. If the +"ranges" property is missing at a given level, it's assumed that +translation isn't possible, i.e., the registers are not visible on the +parent bus. The format of the "ranges" property for a bus is a list +of: + + bus address, parent bus address, size + +"bus address" is in the format of the bus this bus node is defining, +that is, for a PCI bridge, it would be a PCI address. Thus, (bus +address, size) defines a range of addresses for child devices. "parent +bus address" is in the format of the parent bus of this bus. For +example, for a PCI host controller, that would be a CPU address. For a +PCI<->ISA bridge, that would be a PCI address. It defines the base +address in the parent bus where the beginning of that range is mapped. + +For a new 64-bit powerpc board, I recommend either the 2/2 format or +Apple's 2/1 format which is slightly more compact since sizes usually +fit in a single 32-bit word. New 32-bit powerpc boards should use a +1/1 format, unless the processor supports physical addresses greater +than 32-bits, in which case a 2/1 format is recommended. + +Alternatively, the "ranges" property may be empty, indicating that the +registers are visible on the parent bus using an identity mapping +translation. In other words, the parent bus address space is the same +as the child bus address space. + +2) Note about "compatible" properties +------------------------------------- + +These properties are optional, but recommended in devices and the root +node. The format of a "compatible" property is a list of concatenated +zero terminated strings. They allow a device to express its +compatibility with a family of similar devices, in some cases, +allowing a single driver to match against several devices regardless +of their actual names. + +3) Note about "name" properties +------------------------------- + +While earlier users of Open Firmware like OldWorld macintoshes tended +to use the actual device name for the "name" property, it's nowadays +considered a good practice to use a name that is closer to the device +class (often equal to device_type). For example, nowadays, ethernet +controllers are named "ethernet", an additional "model" property +defining precisely the chip type/model, and "compatible" property +defining the family in case a single driver can driver more than one +of these chips. However, the kernel doesn't generally put any +restriction on the "name" property; it is simply considered good +practice to follow the standard and its evolutions as closely as +possible. + +Note also that the new format version 16 makes the "name" property +optional. If it's absent for a node, then the node's unit name is then +used to reconstruct the name. That is, the part of the unit name +before the "@" sign is used (or the entire unit name if no "@" sign +is present). + +4) Note about node and property names and character set +------------------------------------------------------- + +While open firmware provides more flexible usage of 8859-1, this +specification enforces more strict rules. Nodes and properties should +be comprised only of ASCII characters 'a' to 'z', '0' to +'9', ',', '.', '_', '+', '#', '?', and '-'. Node names additionally +allow uppercase characters 'A' to 'Z' (property names should be +lowercase. The fact that vendors like Apple don't respect this rule is +irrelevant here). Additionally, node and property names should always +begin with a character in the range 'a' to 'z' (or 'A' to 'Z' for node +names). + +The maximum number of characters for both nodes and property names +is 31. In the case of node names, this is only the leftmost part of +a unit name (the pure "name" property), it doesn't include the unit +address which can extend beyond that limit. + + +5) Required nodes and properties +-------------------------------- + These are all that are currently required. However, it is strongly + recommended that you expose PCI host bridges as documented in the + PCI binding to open firmware, and your interrupt tree as documented + in OF interrupt tree specification. + + a) The root node + + The root node requires some properties to be present: + + - model : this is your board name/model + - #address-cells : address representation for "root" devices + - #size-cells: the size representation for "root" devices + - device_type : This property shouldn't be necessary. However, if + you decide to create a device_type for your root node, make sure it + is _not_ "chrp" unless your platform is a pSeries or PAPR compliant + one for 64-bit, or a CHRP-type machine for 32-bit as this will + matched by the kernel this way. + + Additionally, some recommended properties are: + + - compatible : the board "family" generally finds its way here, + for example, if you have 2 board models with a similar layout, + that typically get driven by the same platform code in the + kernel, you would use a different "model" property but put a + value in "compatible". The kernel doesn't directly use that + value but it is generally useful. + + The root node is also generally where you add additional properties + specific to your board like the serial number if any, that sort of + thing. It is recommended that if you add any "custom" property whose + name may clash with standard defined ones, you prefix them with your + vendor name and a comma. + + b) The /cpus node + + This node is the parent of all individual CPU nodes. It doesn't + have any specific requirements, though it's generally good practice + to have at least: + + #address-cells = <00000001> + #size-cells = <00000000> + + This defines that the "address" for a CPU is a single cell, and has + no meaningful size. This is not necessary but the kernel will assume + that format when reading the "reg" properties of a CPU node, see + below + + c) The /cpus/* nodes + + So under /cpus, you are supposed to create a node for every CPU on + the machine. There is no specific restriction on the name of the + CPU, though It's common practice to call it PowerPC,. For + example, Apple uses PowerPC,G5 while IBM uses PowerPC,970FX. + + Required properties: + + - device_type : has to be "cpu" + - reg : This is the physical CPU number, it's a single 32-bit cell + and is also used as-is as the unit number for constructing the + unit name in the full path. For example, with 2 CPUs, you would + have the full path: + /cpus/PowerPC,970FX@0 + /cpus/PowerPC,970FX@1 + (unit addresses do not require leading zeroes) + - d-cache-block-size : one cell, L1 data cache block size in bytes (*) + - i-cache-block-size : one cell, L1 instruction cache block size in + bytes + - d-cache-size : one cell, size of L1 data cache in bytes + - i-cache-size : one cell, size of L1 instruction cache in bytes + +(*) The cache "block" size is the size on which the cache management +instructions operate. Historically, this document used the cache +"line" size here which is incorrect. The kernel will prefer the cache +block size and will fallback to cache line size for backward +compatibility. + + Recommended properties: + + - timebase-frequency : a cell indicating the frequency of the + timebase in Hz. This is not directly used by the generic code, + but you are welcome to copy/paste the pSeries code for setting + the kernel timebase/decrementer calibration based on this + value. + - clock-frequency : a cell indicating the CPU core clock frequency + in Hz. A new property will be defined for 64-bit values, but if + your frequency is < 4Ghz, one cell is enough. Here as well as + for the above, the common code doesn't use that property, but + you are welcome to re-use the pSeries or Maple one. A future + kernel version might provide a common function for this. + - d-cache-line-size : one cell, L1 data cache line size in bytes + if different from the block size + - i-cache-line-size : one cell, L1 instruction cache line size in + bytes if different from the block size + + You are welcome to add any property you find relevant to your board, + like some information about the mechanism used to soft-reset the + CPUs. For example, Apple puts the GPIO number for CPU soft reset + lines in there as a "soft-reset" property since they start secondary + CPUs by soft-resetting them. + + + d) the /memory node(s) + + To define the physical memory layout of your board, you should + create one or more memory node(s). You can either create a single + node with all memory ranges in its reg property, or you can create + several nodes, as you wish. The unit address (@ part) used for the + full path is the address of the first range of memory defined by a + given node. If you use a single memory node, this will typically be + @0. + + Required properties: + + - device_type : has to be "memory" + - reg : This property contains all the physical memory ranges of + your board. It's a list of addresses/sizes concatenated + together, with the number of cells of each defined by the + #address-cells and #size-cells of the root node. For example, + with both of these properties being 2 like in the example given + earlier, a 970 based machine with 6Gb of RAM could typically + have a "reg" property here that looks like: + + 00000000 00000000 00000000 80000000 + 00000001 00000000 00000001 00000000 + + That is a range starting at 0 of 0x80000000 bytes and a range + starting at 0x100000000 and of 0x100000000 bytes. You can see + that there is no memory covering the IO hole between 2Gb and + 4Gb. Some vendors prefer splitting those ranges into smaller + segments, but the kernel doesn't care. + + e) The /chosen node + + This node is a bit "special". Normally, that's where open firmware + puts some variable environment information, like the arguments, or + the default input/output devices. + + This specification makes a few of these mandatory, but also defines + some linux-specific properties that would be normally constructed by + the prom_init() trampoline when booting with an OF client interface, + but that you have to provide yourself when using the flattened format. + + Recommended properties: + + - bootargs : This zero-terminated string is passed as the kernel + command line + - linux,stdout-path : This is the full path to your standard + console device if any. Typically, if you have serial devices on + your board, you may want to put the full path to the one set as + the default console in the firmware here, for the kernel to pick + it up as its own default console. If you look at the function + set_preferred_console() in arch/ppc64/kernel/setup.c, you'll see + that the kernel tries to find out the default console and has + knowledge of various types like 8250 serial ports. You may want + to extend this function to add your own. + + Note that u-boot creates and fills in the chosen node for platforms + that use it. + + (Note: a practice that is now obsolete was to include a property + under /chosen called interrupt-controller which had a phandle value + that pointed to the main interrupt controller) + + f) the /soc node + + This node is used to represent a system-on-a-chip (SOC) and must be + present if the processor is a SOC. The top-level soc node contains + information that is global to all devices on the SOC. The node name + should contain a unit address for the SOC, which is the base address + of the memory-mapped register set for the SOC. The name of an soc + node should start with "soc", and the remainder of the name should + represent the part number for the soc. For example, the MPC8540's + soc node would be called "soc8540". + + Required properties: + + - device_type : Should be "soc" + - ranges : Should be defined as specified in 1) to describe the + translation of SOC addresses for memory mapped SOC registers. + - bus-frequency: Contains the bus frequency for the SOC node. + Typically, the value of this field is filled in by the boot + loader. + + + Recommended properties: + + - reg : This property defines the address and size of the + memory-mapped registers that are used for the SOC node itself. + It does not include the child device registers - these will be + defined inside each child node. The address specified in the + "reg" property should match the unit address of the SOC node. + - #address-cells : Address representation for "soc" devices. The + format of this field may vary depending on whether or not the + device registers are memory mapped. For memory mapped + registers, this field represents the number of cells needed to + represent the address of the registers. For SOCs that do not + use MMIO, a special address format should be defined that + contains enough cells to represent the required information. + See 1) above for more details on defining #address-cells. + - #size-cells : Size representation for "soc" devices + - #interrupt-cells : Defines the width of cells used to represent + interrupts. Typically this value is <2>, which includes a + 32-bit number that represents the interrupt number, and a + 32-bit number that represents the interrupt sense and level. + This field is only needed if the SOC contains an interrupt + controller. + + The SOC node may contain child nodes for each SOC device that the + platform uses. Nodes should not be created for devices which exist + on the SOC but are not used by a particular platform. See chapter VI + for more information on how to specify devices that are part of a SOC. + + Example SOC node for the MPC8540: + + soc8540@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <00000000 e0000000 00100000> + reg = ; + bus-frequency = <0>; + } + + + +IV - "dtc", the device tree compiler +==================================== + + +dtc source code can be found at + + +WARNING: This version is still in early development stage; the +resulting device-tree "blobs" have not yet been validated with the +kernel. The current generated block lacks a useful reserve map (it will +be fixed to generate an empty one, it's up to the bootloader to fill +it up) among others. The error handling needs work, bugs are lurking, +etc... + +dtc basically takes a device-tree in a given format and outputs a +device-tree in another format. The currently supported formats are: + + Input formats: + ------------- + + - "dtb": "blob" format, that is a flattened device-tree block + with + header all in a binary blob. + - "dts": "source" format. This is a text file containing a + "source" for a device-tree. The format is defined later in this + chapter. + - "fs" format. This is a representation equivalent to the + output of /proc/device-tree, that is nodes are directories and + properties are files + + Output formats: + --------------- + + - "dtb": "blob" format + - "dts": "source" format + - "asm": assembly language file. This is a file that can be + sourced by gas to generate a device-tree "blob". That file can + then simply be added to your Makefile. Additionally, the + assembly file exports some symbols that can be used. + + +The syntax of the dtc tool is + + dtc [-I ] [-O ] + [-o output-filename] [-V output_version] input_filename + + +The "output_version" defines what version of the "blob" format will be +generated. Supported versions are 1,2,3 and 16. The default is +currently version 3 but that may change in the future to version 16. + +Additionally, dtc performs various sanity checks on the tree, like the +uniqueness of linux, phandle properties, validity of strings, etc... + +The format of the .dts "source" file is "C" like, supports C and C++ +style comments. + +/ { +} + +The above is the "device-tree" definition. It's the only statement +supported currently at the toplevel. + +/ { + property1 = "string_value"; /* define a property containing a 0 + * terminated string + */ + + property2 = <1234abcd>; /* define a property containing a + * numerical 32-bit value (hexadecimal) + */ + + property3 = <12345678 12345678 deadbeef>; + /* define a property containing 3 + * numerical 32-bit values (cells) in + * hexadecimal + */ + property4 = [0a 0b 0c 0d de ea ad be ef]; + /* define a property whose content is + * an arbitrary array of bytes + */ + + childnode@address { /* define a child node named "childnode" + * whose unit name is "childnode at + * address" + */ + + childprop = "hello\n"; /* define a property "childprop" of + * childnode (in this case, a string) + */ + }; +}; + +Nodes can contain other nodes etc... thus defining the hierarchical +structure of the tree. + +Strings support common escape sequences from C: "\n", "\t", "\r", +"\(octal value)", "\x(hex value)". + +It is also suggested that you pipe your source file through cpp (gcc +preprocessor) so you can use #include's, #define for constants, etc... + +Finally, various options are planned but not yet implemented, like +automatic generation of phandles, labels (exported to the asm file so +you can point to a property content and change it easily from whatever +you link the device-tree with), label or path instead of numeric value +in some cells to "point" to a node (replaced by a phandle at compile +time), export of reserve map address to the asm file, ability to +specify reserve map content at compile time, etc... + +We may provide a .h include file with common definitions of that +proves useful for some properties (like building PCI properties or +interrupt maps) though it may be better to add a notion of struct +definitions to the compiler... + + +V - Recommendations for a bootloader +==================================== + + +Here are some various ideas/recommendations that have been proposed +while all this has been defined and implemented. + + - The bootloader may want to be able to use the device-tree itself + and may want to manipulate it (to add/edit some properties, + like physical memory size or kernel arguments). At this point, 2 + choices can be made. Either the bootloader works directly on the + flattened format, or the bootloader has its own internal tree + representation with pointers (similar to the kernel one) and + re-flattens the tree when booting the kernel. The former is a bit + more difficult to edit/modify, the later requires probably a bit + more code to handle the tree structure. Note that the structure + format has been designed so it's relatively easy to "insert" + properties or nodes or delete them by just memmoving things + around. It contains no internal offsets or pointers for this + purpose. + + - An example of code for iterating nodes & retrieving properties + directly from the flattened tree format can be found in the kernel + file arch/ppc64/kernel/prom.c, look at scan_flat_dt() function, + its usage in early_init_devtree(), and the corresponding various + early_init_dt_scan_*() callbacks. That code can be re-used in a + GPL bootloader, and as the author of that code, I would be happy + to discuss possible free licensing to any vendor who wishes to + integrate all or part of this code into a non-GPL bootloader. + + + +VI - System-on-a-chip devices and nodes +======================================= + +Many companies are now starting to develop system-on-a-chip +processors, where the processor core (CPU) and many peripheral devices +exist on a single piece of silicon. For these SOCs, an SOC node +should be used that defines child nodes for the devices that make +up the SOC. While platforms are not required to use this model in +order to boot the kernel, it is highly encouraged that all SOC +implementations define as complete a flat-device-tree as possible to +describe the devices on the SOC. This will allow for the +genericization of much of the kernel code. + + +1) Defining child nodes of an SOC +--------------------------------- + +Each device that is part of an SOC may have its own node entry inside +the SOC node. For each device that is included in the SOC, the unit +address property represents the address offset for this device's +memory-mapped registers in the parent's address space. The parent's +address space is defined by the "ranges" property in the top-level soc +node. The "reg" property for each node that exists directly under the +SOC node should contain the address mapping from the child address space +to the parent SOC address space and the size of the device's +memory-mapped register file. + +For many devices that may exist inside an SOC, there are predefined +specifications for the format of the device tree node. All SOC child +nodes should follow these specifications, except where noted in this +document. + +See appendix A for an example partial SOC node definition for the +MPC8540. + + +2) Representing devices without a current OF specification +---------------------------------------------------------- + +Currently, there are many devices on SOCs that do not have a standard +representation pre-defined as part of the open firmware +specifications, mainly because the boards that contain these SOCs are +not currently booted using open firmware. This section contains +descriptions for the SOC devices for which new nodes have been +defined; this list will expand as more and more SOC-containing +platforms are moved over to use the flattened-device-tree model. + +VII - Specifying interrupt information for devices +=================================================== + +The device tree represents the busses and devices of a hardware +system in a form similar to the physical bus topology of the +hardware. + +In addition, a logical 'interrupt tree' exists which represents the +hierarchy and routing of interrupts in the hardware. + +The interrupt tree model is fully described in the +document "Open Firmware Recommended Practice: Interrupt +Mapping Version 0.9". The document is available at: +. + +1) interrupts property +---------------------- + +Devices that generate interrupts to a single interrupt controller +should use the conventional OF representation described in the +OF interrupt mapping documentation. + +Each device which generates interrupts must have an 'interrupt' +property. The interrupt property value is an arbitrary number of +of 'interrupt specifier' values which describe the interrupt or +interrupts for the device. + +The encoding of an interrupt specifier is determined by the +interrupt domain in which the device is located in the +interrupt tree. The root of an interrupt domain specifies in +its #interrupt-cells property the number of 32-bit cells +required to encode an interrupt specifier. See the OF interrupt +mapping documentation for a detailed description of domains. + +For example, the binding for the OpenPIC interrupt controller +specifies an #interrupt-cells value of 2 to encode the interrupt +number and level/sense information. All interrupt children in an +OpenPIC interrupt domain use 2 cells per interrupt in their interrupts +property. + +The PCI bus binding specifies a #interrupt-cell value of 1 to encode +which interrupt pin (INTA,INTB,INTC,INTD) is used. + +2) interrupt-parent property +---------------------------- + +The interrupt-parent property is specified to define an explicit +link between a device node and its interrupt parent in +the interrupt tree. The value of interrupt-parent is the +phandle of the parent node. + +If the interrupt-parent property is not defined for a node, its +interrupt parent is assumed to be an ancestor in the node's +_device tree_ hierarchy. + +3) OpenPIC Interrupt Controllers +-------------------------------- + +OpenPIC interrupt controllers require 2 cells to encode +interrupt information. The first cell defines the interrupt +number. The second cell defines the sense and level +information. + +Sense and level information should be encoded as follows: + + 0 = low to high edge sensitive type enabled + 1 = active low level sensitive type enabled + 2 = active high level sensitive type enabled + 3 = high to low edge sensitive type enabled + +4) ISA Interrupt Controllers +---------------------------- + +ISA PIC interrupt controllers require 2 cells to encode +interrupt information. The first cell defines the interrupt +number. The second cell defines the sense and level +information. + +ISA PIC interrupt controllers should adhere to the ISA PIC +encodings listed below: + + 0 = active low level sensitive type enabled + 1 = active high level sensitive type enabled + 2 = high to low edge sensitive type enabled + 3 = low to high edge sensitive type enabled + +VIII - Specifying Device Power Management Information (sleep property) +=================================================================== + +Devices on SOCs often have mechanisms for placing devices into low-power +states that are decoupled from the devices' own register blocks. Sometimes, +this information is more complicated than a cell-index property can +reasonably describe. Thus, each device controlled in such a manner +may contain a "sleep" property which describes these connections. + +The sleep property consists of one or more sleep resources, each of +which consists of a phandle to a sleep controller, followed by a +controller-specific sleep specifier of zero or more cells. + +The semantics of what type of low power modes are possible are defined +by the sleep controller. Some examples of the types of low power modes +that may be supported are: + + - Dynamic: The device may be disabled or enabled at any time. + - System Suspend: The device may request to be disabled or remain + awake during system suspend, but will not be disabled until then. + - Permanent: The device is disabled permanently (until the next hard + reset). + +Some devices may share a clock domain with each other, such that they should +only be suspended when none of the devices are in use. Where reasonable, +such nodes should be placed on a virtual bus, where the bus has the sleep +property. If the clock domain is shared among devices that cannot be +reasonably grouped in this manner, then create a virtual sleep controller +(similar to an interrupt nexus, except that defining a standardized +sleep-map should wait until its necessity is demonstrated). + +Appendix A - Sample SOC node for MPC8540 +======================================== + + soc@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8540-ccsr", "simple-bus"; + device_type = "soc"; + ranges = <0x00000000 0xe0000000 0x00100000> + bus-frequency = <0>; + interrupt-parent = <&pic>; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar", "simple-bus"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 E0 0C 00 73 00 ]; + interrupts = <29 2 30 2 34 2>; + phy-handle = <&phy0>; + sleep = <&pmc 00000080>; + ranges; + + mdio@24520 { + reg = <0x24520 0x20>; + compatible = "fsl,gianfar-mdio"; + + phy0: ethernet-phy@0 { + interrupts = <5 1>; + reg = <0>; + device_type = "ethernet-phy"; + }; + + phy1: ethernet-phy@1 { + interrupts = <5 1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + + phy3: ethernet-phy@3 { + interrupts = <7 1>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + }; + + ethernet@25000 { + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + local-mac-address = [ 00 E0 0C 00 73 01 ]; + interrupts = <13 2 14 2 18 2>; + phy-handle = <&phy1>; + sleep = <&pmc 00000040>; + }; + + ethernet@26000 { + device_type = "network"; + model = "FEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + local-mac-address = [ 00 E0 0C 00 73 02 ]; + interrupts = <41 2>; + phy-handle = <&phy3>; + sleep = <&pmc 00000020>; + }; + + serial@4500 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8540-duart", "simple-bus"; + sleep = <&pmc 00000002>; + ranges; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + }; + }; + + pic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + i2c@3000 { + interrupts = <43 2>; + reg = <0x3000 0x100>; + compatible = "fsl-i2c"; + dfsrr; + sleep = <&pmc 00000004>; + }; + + pmc: power@e0070 { + compatible = "fsl,mpc8540-pmc", "fsl,mpc8548-pmc"; + reg = <0xe0070 0x20>; + }; + }; diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt deleted file mode 100644 index 7400d7555dc..00000000000 --- a/Documentation/powerpc/booting-without-of.txt +++ /dev/null @@ -1,1447 +0,0 @@ - Booting the Linux/ppc kernel without Open Firmware - -------------------------------------------------- - -(c) 2005 Benjamin Herrenschmidt , - IBM Corp. -(c) 2005 Becky Bruce , - Freescale Semiconductor, FSL SOC and 32-bit additions -(c) 2006 MontaVista Software, Inc. - Flash chip node definition - -Table of Contents -================= - - I - Introduction - 1) Entry point for arch/powerpc - 2) Board support - - II - The DT block format - 1) Header - 2) Device tree generalities - 3) Device tree "structure" block - 4) Device tree "strings" block - - III - Required content of the device tree - 1) Note about cells and address representation - 2) Note about "compatible" properties - 3) Note about "name" properties - 4) Note about node and property names and character set - 5) Required nodes and properties - a) The root node - b) The /cpus node - c) The /cpus/* nodes - d) the /memory node(s) - e) The /chosen node - f) the /soc node - - IV - "dtc", the device tree compiler - - V - Recommendations for a bootloader - - VI - System-on-a-chip devices and nodes - 1) Defining child nodes of an SOC - 2) Representing devices without a current OF specification - a) PHY nodes - b) Interrupt controllers - c) 4xx/Axon EMAC ethernet nodes - d) Xilinx IP cores - e) USB EHCI controllers - f) MDIO on GPIOs - g) SPI busses - - VII - Specifying interrupt information for devices - 1) interrupts property - 2) interrupt-parent property - 3) OpenPIC Interrupt Controllers - 4) ISA Interrupt Controllers - - VIII - Specifying device power management information (sleep property) - - Appendix A - Sample SOC node for MPC8540 - - -Revision Information -==================== - - May 18, 2005: Rev 0.1 - Initial draft, no chapter III yet. - - May 19, 2005: Rev 0.2 - Add chapter III and bits & pieces here or - clarifies the fact that a lot of things are - optional, the kernel only requires a very - small device tree, though it is encouraged - to provide an as complete one as possible. - - May 24, 2005: Rev 0.3 - Precise that DT block has to be in RAM - - Misc fixes - - Define version 3 and new format version 16 - for the DT block (version 16 needs kernel - patches, will be fwd separately). - String block now has a size, and full path - is replaced by unit name for more - compactness. - linux,phandle is made optional, only nodes - that are referenced by other nodes need it. - "name" property is now automatically - deduced from the unit name - - June 1, 2005: Rev 0.4 - Correct confusion between OF_DT_END and - OF_DT_END_NODE in structure definition. - - Change version 16 format to always align - property data to 4 bytes. Since tokens are - already aligned, that means no specific - required alignment between property size - and property data. The old style variable - alignment would make it impossible to do - "simple" insertion of properties using - memmove (thanks Milton for - noticing). Updated kernel patch as well - - Correct a few more alignment constraints - - Add a chapter about the device-tree - compiler and the textural representation of - the tree that can be "compiled" by dtc. - - November 21, 2005: Rev 0.5 - - Additions/generalizations for 32-bit - - Changed to reflect the new arch/powerpc - structure - - Added chapter VI - - - ToDo: - - Add some definitions of interrupt tree (simple/complex) - - Add some definitions for PCI host bridges - - Add some common address format examples - - Add definitions for standard properties and "compatible" - names for cells that are not already defined by the existing - OF spec. - - Compare FSL SOC use of PCI to standard and make sure no new - node definition required. - - Add more information about node definitions for SOC devices - that currently have no standard, like the FSL CPM. - - -I - Introduction -================ - -During the recent development of the Linux/ppc64 kernel, and more -specifically, the addition of new platform types outside of the old -IBM pSeries/iSeries pair, it was decided to enforce some strict rules -regarding the kernel entry and bootloader <-> kernel interfaces, in -order to avoid the degeneration that had become the ppc32 kernel entry -point and the way a new platform should be added to the kernel. The -legacy iSeries platform breaks those rules as it predates this scheme, -but no new board support will be accepted in the main tree that -doesn't follow them properly. In addition, since the advent of the -arch/powerpc merged architecture for ppc32 and ppc64, new 32-bit -platforms and 32-bit platforms which move into arch/powerpc will be -required to use these rules as well. - -The main requirement that will be defined in more detail below is -the presence of a device-tree whose format is defined after Open -Firmware specification. However, in order to make life easier -to embedded board vendors, the kernel doesn't require the device-tree -to represent every device in the system and only requires some nodes -and properties to be present. This will be described in detail in -section III, but, for example, the kernel does not require you to -create a node for every PCI device in the system. It is a requirement -to have a node for PCI host bridges in order to provide interrupt -routing informations and memory/IO ranges, among others. It is also -recommended to define nodes for on chip devices and other busses that -don't specifically fit in an existing OF specification. This creates a -great flexibility in the way the kernel can then probe those and match -drivers to device, without having to hard code all sorts of tables. It -also makes it more flexible for board vendors to do minor hardware -upgrades without significantly impacting the kernel code or cluttering -it with special cases. - - -1) Entry point for arch/powerpc -------------------------------- - - There is one and one single entry point to the kernel, at the start - of the kernel image. That entry point supports two calling - conventions: - - a) Boot from Open Firmware. If your firmware is compatible - with Open Firmware (IEEE 1275) or provides an OF compatible - client interface API (support for "interpret" callback of - forth words isn't required), you can enter the kernel with: - - r5 : OF callback pointer as defined by IEEE 1275 - bindings to powerpc. Only the 32-bit client interface - is currently supported - - r3, r4 : address & length of an initrd if any or 0 - - The MMU is either on or off; the kernel will run the - trampoline located in arch/powerpc/kernel/prom_init.c to - extract the device-tree and other information from open - firmware and build a flattened device-tree as described - in b). prom_init() will then re-enter the kernel using - the second method. This trampoline code runs in the - context of the firmware, which is supposed to handle all - exceptions during that time. - - b) Direct entry with a flattened device-tree block. This entry - point is called by a) after the OF trampoline and can also be - called directly by a bootloader that does not support the Open - Firmware client interface. It is also used by "kexec" to - implement "hot" booting of a new kernel from a previous - running one. This method is what I will describe in more - details in this document, as method a) is simply standard Open - Firmware, and thus should be implemented according to the - various standard documents defining it and its binding to the - PowerPC platform. The entry point definition then becomes: - - r3 : physical pointer to the device-tree block - (defined in chapter II) in RAM - - r4 : physical pointer to the kernel itself. This is - used by the assembly code to properly disable the MMU - in case you are entering the kernel with MMU enabled - and a non-1:1 mapping. - - r5 : NULL (as to differentiate with method a) - - Note about SMP entry: Either your firmware puts your other - CPUs in some sleep loop or spin loop in ROM where you can get - them out via a soft reset or some other means, in which case - you don't need to care, or you'll have to enter the kernel - with all CPUs. The way to do that with method b) will be - described in a later revision of this document. - - -2) Board support ----------------- - -64-bit kernels: - - Board supports (platforms) are not exclusive config options. An - arbitrary set of board supports can be built in a single kernel - image. The kernel will "know" what set of functions to use for a - given platform based on the content of the device-tree. Thus, you - should: - - a) add your platform support as a _boolean_ option in - arch/powerpc/Kconfig, following the example of PPC_PSERIES, - PPC_PMAC and PPC_MAPLE. The later is probably a good - example of a board support to start from. - - b) create your main platform file as - "arch/powerpc/platforms/myplatform/myboard_setup.c" and add it - to the Makefile under the condition of your CONFIG_ - option. This file will define a structure of type "ppc_md" - containing the various callbacks that the generic code will - use to get to your platform specific code - - c) Add a reference to your "ppc_md" structure in the - "machines" table in arch/powerpc/kernel/setup_64.c if you are - a 64-bit platform. - - d) request and get assigned a platform number (see PLATFORM_* - constants in arch/powerpc/include/asm/processor.h - -32-bit embedded kernels: - - Currently, board support is essentially an exclusive config option. - The kernel is configured for a single platform. Part of the reason - for this is to keep kernels on embedded systems small and efficient; - part of this is due to the fact the code is already that way. In the - future, a kernel may support multiple platforms, but only if the - platforms feature the same core architecture. A single kernel build - cannot support both configurations with Book E and configurations - with classic Powerpc architectures. - - 32-bit embedded platforms that are moved into arch/powerpc using a - flattened device tree should adopt the merged tree practice of - setting ppc_md up dynamically, even though the kernel is currently - built with support for only a single platform at a time. This allows - unification of the setup code, and will make it easier to go to a - multiple-platform-support model in the future. - -NOTE: I believe the above will be true once Ben's done with the merge -of the boot sequences.... someone speak up if this is wrong! - - To add a 32-bit embedded platform support, follow the instructions - for 64-bit platforms above, with the exception that the Kconfig - option should be set up such that the kernel builds exclusively for - the platform selected. The processor type for the platform should - enable another config option to select the specific board - supported. - -NOTE: If Ben doesn't merge the setup files, may need to change this to -point to setup_32.c - - - I will describe later the boot process and various callbacks that - your platform should implement. - - -II - The DT block format -======================== - - -This chapter defines the actual format of the flattened device-tree -passed to the kernel. The actual content of it and kernel requirements -are described later. You can find example of code manipulating that -format in various places, including arch/powerpc/kernel/prom_init.c -which will generate a flattened device-tree from the Open Firmware -representation, or the fs2dt utility which is part of the kexec tools -which will generate one from a filesystem representation. It is -expected that a bootloader like uboot provides a bit more support, -that will be discussed later as well. - -Note: The block has to be in main memory. It has to be accessible in -both real mode and virtual mode with no mapping other than main -memory. If you are writing a simple flash bootloader, it should copy -the block to RAM before passing it to the kernel. - - -1) Header ---------- - - The kernel is entered with r3 pointing to an area of memory that is - roughly described in arch/powerpc/include/asm/prom.h by the structure - boot_param_header: - -struct boot_param_header { - u32 magic; /* magic word OF_DT_HEADER */ - u32 totalsize; /* total size of DT block */ - u32 off_dt_struct; /* offset to structure */ - u32 off_dt_strings; /* offset to strings */ - u32 off_mem_rsvmap; /* offset to memory reserve map - */ - u32 version; /* format version */ - u32 last_comp_version; /* last compatible version */ - - /* version 2 fields below */ - u32 boot_cpuid_phys; /* Which physical CPU id we're - booting on */ - /* version 3 fields below */ - u32 size_dt_strings; /* size of the strings block */ - - /* version 17 fields below */ - u32 size_dt_struct; /* size of the DT structure block */ -}; - - Along with the constants: - -/* Definitions used by the flattened device tree */ -#define OF_DT_HEADER 0xd00dfeed /* 4: version, - 4: total size */ -#define OF_DT_BEGIN_NODE 0x1 /* Start node: full name - */ -#define OF_DT_END_NODE 0x2 /* End node */ -#define OF_DT_PROP 0x3 /* Property: name off, - size, content */ -#define OF_DT_END 0x9 - - All values in this header are in big endian format, the various - fields in this header are defined more precisely below. All - "offset" values are in bytes from the start of the header; that is - from the value of r3. - - - magic - - This is a magic value that "marks" the beginning of the - device-tree block header. It contains the value 0xd00dfeed and is - defined by the constant OF_DT_HEADER - - - totalsize - - This is the total size of the DT block including the header. The - "DT" block should enclose all data structures defined in this - chapter (who are pointed to by offsets in this header). That is, - the device-tree structure, strings, and the memory reserve map. - - - off_dt_struct - - This is an offset from the beginning of the header to the start - of the "structure" part the device tree. (see 2) device tree) - - - off_dt_strings - - This is an offset from the beginning of the header to the start - of the "strings" part of the device-tree - - - off_mem_rsvmap - - This is an offset from the beginning of the header to the start - of the reserved memory map. This map is a list of pairs of 64- - bit integers. Each pair is a physical address and a size. The - list is terminated by an entry of size 0. This map provides the - kernel with a list of physical memory areas that are "reserved" - and thus not to be used for memory allocations, especially during - early initialization. The kernel needs to allocate memory during - boot for things like un-flattening the device-tree, allocating an - MMU hash table, etc... Those allocations must be done in such a - way to avoid overriding critical things like, on Open Firmware - capable machines, the RTAS instance, or on some pSeries, the TCE - tables used for the iommu. Typically, the reserve map should - contain _at least_ this DT block itself (header,total_size). If - you are passing an initrd to the kernel, you should reserve it as - well. You do not need to reserve the kernel image itself. The map - should be 64-bit aligned. - - - version - - This is the version of this structure. Version 1 stops - here. Version 2 adds an additional field boot_cpuid_phys. - Version 3 adds the size of the strings block, allowing the kernel - to reallocate it easily at boot and free up the unused flattened - structure after expansion. Version 16 introduces a new more - "compact" format for the tree itself that is however not backward - compatible. Version 17 adds an additional field, size_dt_struct, - allowing it to be reallocated or moved more easily (this is - particularly useful for bootloaders which need to make - adjustments to a device tree based on probed information). You - should always generate a structure of the highest version defined - at the time of your implementation. Currently that is version 17, - unless you explicitly aim at being backward compatible. - - - last_comp_version - - Last compatible version. This indicates down to what version of - the DT block you are backward compatible. For example, version 2 - is backward compatible with version 1 (that is, a kernel build - for version 1 will be able to boot with a version 2 format). You - should put a 1 in this field if you generate a device tree of - version 1 to 3, or 16 if you generate a tree of version 16 or 17 - using the new unit name format. - - - boot_cpuid_phys - - This field only exist on version 2 headers. It indicate which - physical CPU ID is calling the kernel entry point. This is used, - among others, by kexec. If you are on an SMP system, this value - should match the content of the "reg" property of the CPU node in - the device-tree corresponding to the CPU calling the kernel entry - point (see further chapters for more informations on the required - device-tree contents) - - - size_dt_strings - - This field only exists on version 3 and later headers. It - gives the size of the "strings" section of the device tree (which - starts at the offset given by off_dt_strings). - - - size_dt_struct - - This field only exists on version 17 and later headers. It gives - the size of the "structure" section of the device tree (which - starts at the offset given by off_dt_struct). - - So the typical layout of a DT block (though the various parts don't - need to be in that order) looks like this (addresses go from top to - bottom): - - - ------------------------------ - r3 -> | struct boot_param_header | - ------------------------------ - | (alignment gap) (*) | - ------------------------------ - | memory reserve map | - ------------------------------ - | (alignment gap) | - ------------------------------ - | | - | device-tree structure | - | | - ------------------------------ - | (alignment gap) | - ------------------------------ - | | - | device-tree strings | - | | - -----> ------------------------------ - | - | - --- (r3 + totalsize) - - (*) The alignment gaps are not necessarily present; their presence - and size are dependent on the various alignment requirements of - the individual data blocks. - - -2) Device tree generalities ---------------------------- - -This device-tree itself is separated in two different blocks, a -structure block and a strings block. Both need to be aligned to a 4 -byte boundary. - -First, let's quickly describe the device-tree concept before detailing -the storage format. This chapter does _not_ describe the detail of the -required types of nodes & properties for the kernel, this is done -later in chapter III. - -The device-tree layout is strongly inherited from the definition of -the Open Firmware IEEE 1275 device-tree. It's basically a tree of -nodes, each node having two or more named properties. A property can -have a value or not. - -It is a tree, so each node has one and only one parent except for the -root node who has no parent. - -A node has 2 names. The actual node name is generally contained in a -property of type "name" in the node property list whose value is a -zero terminated string and is mandatory for version 1 to 3 of the -format definition (as it is in Open Firmware). Version 16 makes it -optional as it can generate it from the unit name defined below. - -There is also a "unit name" that is used to differentiate nodes with -the same name at the same level, it is usually made of the node -names, the "@" sign, and a "unit address", which definition is -specific to the bus type the node sits on. - -The unit name doesn't exist as a property per-se but is included in -the device-tree structure. It is typically used to represent "path" in -the device-tree. More details about the actual format of these will be -below. - -The kernel powerpc generic code does not make any formal use of the -unit address (though some board support code may do) so the only real -requirement here for the unit address is to ensure uniqueness of -the node unit name at a given level of the tree. Nodes with no notion -of address and no possible sibling of the same name (like /memory or -/cpus) may omit the unit address in the context of this specification, -or use the "@0" default unit address. The unit name is used to define -a node "full path", which is the concatenation of all parent node -unit names separated with "/". - -The root node doesn't have a defined name, and isn't required to have -a name property either if you are using version 3 or earlier of the -format. It also has no unit address (no @ symbol followed by a unit -address). The root node unit name is thus an empty string. The full -path to the root node is "/". - -Every node which actually represents an actual device (that is, a node -which isn't only a virtual "container" for more nodes, like "/cpus" -is) is also required to have a "device_type" property indicating the -type of node . - -Finally, every node that can be referenced from a property in another -node is required to have a "linux,phandle" property. Real open -firmware implementations provide a unique "phandle" value for every -node that the "prom_init()" trampoline code turns into -"linux,phandle" properties. However, this is made optional if the -flattened device tree is used directly. An example of a node -referencing another node via "phandle" is when laying out the -interrupt tree which will be described in a further version of this -document. - -This "linux, phandle" property is a 32-bit value that uniquely -identifies a node. You are free to use whatever values or system of -values, internal pointers, or whatever to generate these, the only -requirement is that every node for which you provide that property has -a unique value for it. - -Here is an example of a simple device-tree. In this example, an "o" -designates a node followed by the node unit name. Properties are -presented with their name followed by their content. "content" -represents an ASCII string (zero terminated) value, while -represents a 32-bit hexadecimal value. The various nodes in this -example will be discussed in a later chapter. At this point, it is -only meant to give you a idea of what a device-tree looks like. I have -purposefully kept the "name" and "linux,phandle" properties which -aren't necessary in order to give you a better idea of what the tree -looks like in practice. - - / o device-tree - |- name = "device-tree" - |- model = "MyBoardName" - |- compatible = "MyBoardFamilyName" - |- #address-cells = <2> - |- #size-cells = <2> - |- linux,phandle = <0> - | - o cpus - | | - name = "cpus" - | | - linux,phandle = <1> - | | - #address-cells = <1> - | | - #size-cells = <0> - | | - | o PowerPC,970@0 - | |- name = "PowerPC,970" - | |- device_type = "cpu" - | |- reg = <0> - | |- clock-frequency = <5f5e1000> - | |- 64-bit - | |- linux,phandle = <2> - | - o memory@0 - | |- name = "memory" - | |- device_type = "memory" - | |- reg = <00000000 00000000 00000000 20000000> - | |- linux,phandle = <3> - | - o chosen - |- name = "chosen" - |- bootargs = "root=/dev/sda2" - |- linux,phandle = <4> - -This tree is almost a minimal tree. It pretty much contains the -minimal set of required nodes and properties to boot a linux kernel; -that is, some basic model informations at the root, the CPUs, and the -physical memory layout. It also includes misc information passed -through /chosen, like in this example, the platform type (mandatory) -and the kernel command line arguments (optional). - -The /cpus/PowerPC,970@0/64-bit property is an example of a -property without a value. All other properties have a value. The -significance of the #address-cells and #size-cells properties will be -explained in chapter IV which defines precisely the required nodes and -properties and their content. - - -3) Device tree "structure" block - -The structure of the device tree is a linearized tree structure. The -"OF_DT_BEGIN_NODE" token starts a new node, and the "OF_DT_END_NODE" -ends that node definition. Child nodes are simply defined before -"OF_DT_END_NODE" (that is nodes within the node). A 'token' is a 32 -bit value. The tree has to be "finished" with a OF_DT_END token - -Here's the basic structure of a single node: - - * token OF_DT_BEGIN_NODE (that is 0x00000001) - * for version 1 to 3, this is the node full path as a zero - terminated string, starting with "/". For version 16 and later, - this is the node unit name only (or an empty string for the - root node) - * [align gap to next 4 bytes boundary] - * for each property: - * token OF_DT_PROP (that is 0x00000003) - * 32-bit value of property value size in bytes (or 0 if no - value) - * 32-bit value of offset in string block of property name - * property value data if any - * [align gap to next 4 bytes boundary] - * [child nodes if any] - * token OF_DT_END_NODE (that is 0x00000002) - -So the node content can be summarized as a start token, a full path, -a list of properties, a list of child nodes, and an end token. Every -child node is a full node structure itself as defined above. - -NOTE: The above definition requires that all property definitions for -a particular node MUST precede any subnode definitions for that node. -Although the structure would not be ambiguous if properties and -subnodes were intermingled, the kernel parser requires that the -properties come first (up until at least 2.6.22). Any tools -manipulating a flattened tree must take care to preserve this -constraint. - -4) Device tree "strings" block - -In order to save space, property names, which are generally redundant, -are stored separately in the "strings" block. This block is simply the -whole bunch of zero terminated strings for all property names -concatenated together. The device-tree property definitions in the -structure block will contain offset values from the beginning of the -strings block. - - -III - Required content of the device tree -========================================= - -WARNING: All "linux,*" properties defined in this document apply only -to a flattened device-tree. If your platform uses a real -implementation of Open Firmware or an implementation compatible with -the Open Firmware client interface, those properties will be created -by the trampoline code in the kernel's prom_init() file. For example, -that's where you'll have to add code to detect your board model and -set the platform number. However, when using the flattened device-tree -entry point, there is no prom_init() pass, and thus you have to -provide those properties yourself. - - -1) Note about cells and address representation ----------------------------------------------- - -The general rule is documented in the various Open Firmware -documentations. If you choose to describe a bus with the device-tree -and there exist an OF bus binding, then you should follow the -specification. However, the kernel does not require every single -device or bus to be described by the device tree. - -In general, the format of an address for a device is defined by the -parent bus type, based on the #address-cells and #size-cells -properties. Note that the parent's parent definitions of #address-cells -and #size-cells are not inherited so every node with children must specify -them. The kernel requires the root node to have those properties defining -addresses format for devices directly mapped on the processor bus. - -Those 2 properties define 'cells' for representing an address and a -size. A "cell" is a 32-bit number. For example, if both contain 2 -like the example tree given above, then an address and a size are both -composed of 2 cells, and each is a 64-bit number (cells are -concatenated and expected to be in big endian format). Another example -is the way Apple firmware defines them, with 2 cells for an address -and one cell for a size. Most 32-bit implementations should define -#address-cells and #size-cells to 1, which represents a 32-bit value. -Some 32-bit processors allow for physical addresses greater than 32 -bits; these processors should define #address-cells as 2. - -"reg" properties are always a tuple of the type "address size" where -the number of cells of address and size is specified by the bus -#address-cells and #size-cells. When a bus supports various address -spaces and other flags relative to a given address allocation (like -prefetchable, etc...) those flags are usually added to the top level -bits of the physical address. For example, a PCI physical address is -made of 3 cells, the bottom two containing the actual address itself -while the top cell contains address space indication, flags, and pci -bus & device numbers. - -For busses that support dynamic allocation, it's the accepted practice -to then not provide the address in "reg" (keep it 0) though while -providing a flag indicating the address is dynamically allocated, and -then, to provide a separate "assigned-addresses" property that -contains the fully allocated addresses. See the PCI OF bindings for -details. - -In general, a simple bus with no address space bits and no dynamic -allocation is preferred if it reflects your hardware, as the existing -kernel address parsing functions will work out of the box. If you -define a bus type with a more complex address format, including things -like address space bits, you'll have to add a bus translator to the -prom_parse.c file of the recent kernels for your bus type. - -The "reg" property only defines addresses and sizes (if #size-cells is -non-0) within a given bus. In order to translate addresses upward -(that is into parent bus addresses, and possibly into CPU physical -addresses), all busses must contain a "ranges" property. If the -"ranges" property is missing at a given level, it's assumed that -translation isn't possible, i.e., the registers are not visible on the -parent bus. The format of the "ranges" property for a bus is a list -of: - - bus address, parent bus address, size - -"bus address" is in the format of the bus this bus node is defining, -that is, for a PCI bridge, it would be a PCI address. Thus, (bus -address, size) defines a range of addresses for child devices. "parent -bus address" is in the format of the parent bus of this bus. For -example, for a PCI host controller, that would be a CPU address. For a -PCI<->ISA bridge, that would be a PCI address. It defines the base -address in the parent bus where the beginning of that range is mapped. - -For a new 64-bit powerpc board, I recommend either the 2/2 format or -Apple's 2/1 format which is slightly more compact since sizes usually -fit in a single 32-bit word. New 32-bit powerpc boards should use a -1/1 format, unless the processor supports physical addresses greater -than 32-bits, in which case a 2/1 format is recommended. - -Alternatively, the "ranges" property may be empty, indicating that the -registers are visible on the parent bus using an identity mapping -translation. In other words, the parent bus address space is the same -as the child bus address space. - -2) Note about "compatible" properties -------------------------------------- - -These properties are optional, but recommended in devices and the root -node. The format of a "compatible" property is a list of concatenated -zero terminated strings. They allow a device to express its -compatibility with a family of similar devices, in some cases, -allowing a single driver to match against several devices regardless -of their actual names. - -3) Note about "name" properties -------------------------------- - -While earlier users of Open Firmware like OldWorld macintoshes tended -to use the actual device name for the "name" property, it's nowadays -considered a good practice to use a name that is closer to the device -class (often equal to device_type). For example, nowadays, ethernet -controllers are named "ethernet", an additional "model" property -defining precisely the chip type/model, and "compatible" property -defining the family in case a single driver can driver more than one -of these chips. However, the kernel doesn't generally put any -restriction on the "name" property; it is simply considered good -practice to follow the standard and its evolutions as closely as -possible. - -Note also that the new format version 16 makes the "name" property -optional. If it's absent for a node, then the node's unit name is then -used to reconstruct the name. That is, the part of the unit name -before the "@" sign is used (or the entire unit name if no "@" sign -is present). - -4) Note about node and property names and character set -------------------------------------------------------- - -While open firmware provides more flexible usage of 8859-1, this -specification enforces more strict rules. Nodes and properties should -be comprised only of ASCII characters 'a' to 'z', '0' to -'9', ',', '.', '_', '+', '#', '?', and '-'. Node names additionally -allow uppercase characters 'A' to 'Z' (property names should be -lowercase. The fact that vendors like Apple don't respect this rule is -irrelevant here). Additionally, node and property names should always -begin with a character in the range 'a' to 'z' (or 'A' to 'Z' for node -names). - -The maximum number of characters for both nodes and property names -is 31. In the case of node names, this is only the leftmost part of -a unit name (the pure "name" property), it doesn't include the unit -address which can extend beyond that limit. - - -5) Required nodes and properties --------------------------------- - These are all that are currently required. However, it is strongly - recommended that you expose PCI host bridges as documented in the - PCI binding to open firmware, and your interrupt tree as documented - in OF interrupt tree specification. - - a) The root node - - The root node requires some properties to be present: - - - model : this is your board name/model - - #address-cells : address representation for "root" devices - - #size-cells: the size representation for "root" devices - - device_type : This property shouldn't be necessary. However, if - you decide to create a device_type for your root node, make sure it - is _not_ "chrp" unless your platform is a pSeries or PAPR compliant - one for 64-bit, or a CHRP-type machine for 32-bit as this will - matched by the kernel this way. - - Additionally, some recommended properties are: - - - compatible : the board "family" generally finds its way here, - for example, if you have 2 board models with a similar layout, - that typically get driven by the same platform code in the - kernel, you would use a different "model" property but put a - value in "compatible". The kernel doesn't directly use that - value but it is generally useful. - - The root node is also generally where you add additional properties - specific to your board like the serial number if any, that sort of - thing. It is recommended that if you add any "custom" property whose - name may clash with standard defined ones, you prefix them with your - vendor name and a comma. - - b) The /cpus node - - This node is the parent of all individual CPU nodes. It doesn't - have any specific requirements, though it's generally good practice - to have at least: - - #address-cells = <00000001> - #size-cells = <00000000> - - This defines that the "address" for a CPU is a single cell, and has - no meaningful size. This is not necessary but the kernel will assume - that format when reading the "reg" properties of a CPU node, see - below - - c) The /cpus/* nodes - - So under /cpus, you are supposed to create a node for every CPU on - the machine. There is no specific restriction on the name of the - CPU, though It's common practice to call it PowerPC,. For - example, Apple uses PowerPC,G5 while IBM uses PowerPC,970FX. - - Required properties: - - - device_type : has to be "cpu" - - reg : This is the physical CPU number, it's a single 32-bit cell - and is also used as-is as the unit number for constructing the - unit name in the full path. For example, with 2 CPUs, you would - have the full path: - /cpus/PowerPC,970FX@0 - /cpus/PowerPC,970FX@1 - (unit addresses do not require leading zeroes) - - d-cache-block-size : one cell, L1 data cache block size in bytes (*) - - i-cache-block-size : one cell, L1 instruction cache block size in - bytes - - d-cache-size : one cell, size of L1 data cache in bytes - - i-cache-size : one cell, size of L1 instruction cache in bytes - -(*) The cache "block" size is the size on which the cache management -instructions operate. Historically, this document used the cache -"line" size here which is incorrect. The kernel will prefer the cache -block size and will fallback to cache line size for backward -compatibility. - - Recommended properties: - - - timebase-frequency : a cell indicating the frequency of the - timebase in Hz. This is not directly used by the generic code, - but you are welcome to copy/paste the pSeries code for setting - the kernel timebase/decrementer calibration based on this - value. - - clock-frequency : a cell indicating the CPU core clock frequency - in Hz. A new property will be defined for 64-bit values, but if - your frequency is < 4Ghz, one cell is enough. Here as well as - for the above, the common code doesn't use that property, but - you are welcome to re-use the pSeries or Maple one. A future - kernel version might provide a common function for this. - - d-cache-line-size : one cell, L1 data cache line size in bytes - if different from the block size - - i-cache-line-size : one cell, L1 instruction cache line size in - bytes if different from the block size - - You are welcome to add any property you find relevant to your board, - like some information about the mechanism used to soft-reset the - CPUs. For example, Apple puts the GPIO number for CPU soft reset - lines in there as a "soft-reset" property since they start secondary - CPUs by soft-resetting them. - - - d) the /memory node(s) - - To define the physical memory layout of your board, you should - create one or more memory node(s). You can either create a single - node with all memory ranges in its reg property, or you can create - several nodes, as you wish. The unit address (@ part) used for the - full path is the address of the first range of memory defined by a - given node. If you use a single memory node, this will typically be - @0. - - Required properties: - - - device_type : has to be "memory" - - reg : This property contains all the physical memory ranges of - your board. It's a list of addresses/sizes concatenated - together, with the number of cells of each defined by the - #address-cells and #size-cells of the root node. For example, - with both of these properties being 2 like in the example given - earlier, a 970 based machine with 6Gb of RAM could typically - have a "reg" property here that looks like: - - 00000000 00000000 00000000 80000000 - 00000001 00000000 00000001 00000000 - - That is a range starting at 0 of 0x80000000 bytes and a range - starting at 0x100000000 and of 0x100000000 bytes. You can see - that there is no memory covering the IO hole between 2Gb and - 4Gb. Some vendors prefer splitting those ranges into smaller - segments, but the kernel doesn't care. - - e) The /chosen node - - This node is a bit "special". Normally, that's where open firmware - puts some variable environment information, like the arguments, or - the default input/output devices. - - This specification makes a few of these mandatory, but also defines - some linux-specific properties that would be normally constructed by - the prom_init() trampoline when booting with an OF client interface, - but that you have to provide yourself when using the flattened format. - - Recommended properties: - - - bootargs : This zero-terminated string is passed as the kernel - command line - - linux,stdout-path : This is the full path to your standard - console device if any. Typically, if you have serial devices on - your board, you may want to put the full path to the one set as - the default console in the firmware here, for the kernel to pick - it up as its own default console. If you look at the function - set_preferred_console() in arch/ppc64/kernel/setup.c, you'll see - that the kernel tries to find out the default console and has - knowledge of various types like 8250 serial ports. You may want - to extend this function to add your own. - - Note that u-boot creates and fills in the chosen node for platforms - that use it. - - (Note: a practice that is now obsolete was to include a property - under /chosen called interrupt-controller which had a phandle value - that pointed to the main interrupt controller) - - f) the /soc node - - This node is used to represent a system-on-a-chip (SOC) and must be - present if the processor is a SOC. The top-level soc node contains - information that is global to all devices on the SOC. The node name - should contain a unit address for the SOC, which is the base address - of the memory-mapped register set for the SOC. The name of an soc - node should start with "soc", and the remainder of the name should - represent the part number for the soc. For example, the MPC8540's - soc node would be called "soc8540". - - Required properties: - - - device_type : Should be "soc" - - ranges : Should be defined as specified in 1) to describe the - translation of SOC addresses for memory mapped SOC registers. - - bus-frequency: Contains the bus frequency for the SOC node. - Typically, the value of this field is filled in by the boot - loader. - - - Recommended properties: - - - reg : This property defines the address and size of the - memory-mapped registers that are used for the SOC node itself. - It does not include the child device registers - these will be - defined inside each child node. The address specified in the - "reg" property should match the unit address of the SOC node. - - #address-cells : Address representation for "soc" devices. The - format of this field may vary depending on whether or not the - device registers are memory mapped. For memory mapped - registers, this field represents the number of cells needed to - represent the address of the registers. For SOCs that do not - use MMIO, a special address format should be defined that - contains enough cells to represent the required information. - See 1) above for more details on defining #address-cells. - - #size-cells : Size representation for "soc" devices - - #interrupt-cells : Defines the width of cells used to represent - interrupts. Typically this value is <2>, which includes a - 32-bit number that represents the interrupt number, and a - 32-bit number that represents the interrupt sense and level. - This field is only needed if the SOC contains an interrupt - controller. - - The SOC node may contain child nodes for each SOC device that the - platform uses. Nodes should not be created for devices which exist - on the SOC but are not used by a particular platform. See chapter VI - for more information on how to specify devices that are part of a SOC. - - Example SOC node for the MPC8540: - - soc8540@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - #interrupt-cells = <2>; - device_type = "soc"; - ranges = <00000000 e0000000 00100000> - reg = ; - bus-frequency = <0>; - } - - - -IV - "dtc", the device tree compiler -==================================== - - -dtc source code can be found at - - -WARNING: This version is still in early development stage; the -resulting device-tree "blobs" have not yet been validated with the -kernel. The current generated block lacks a useful reserve map (it will -be fixed to generate an empty one, it's up to the bootloader to fill -it up) among others. The error handling needs work, bugs are lurking, -etc... - -dtc basically takes a device-tree in a given format and outputs a -device-tree in another format. The currently supported formats are: - - Input formats: - ------------- - - - "dtb": "blob" format, that is a flattened device-tree block - with - header all in a binary blob. - - "dts": "source" format. This is a text file containing a - "source" for a device-tree. The format is defined later in this - chapter. - - "fs" format. This is a representation equivalent to the - output of /proc/device-tree, that is nodes are directories and - properties are files - - Output formats: - --------------- - - - "dtb": "blob" format - - "dts": "source" format - - "asm": assembly language file. This is a file that can be - sourced by gas to generate a device-tree "blob". That file can - then simply be added to your Makefile. Additionally, the - assembly file exports some symbols that can be used. - - -The syntax of the dtc tool is - - dtc [-I ] [-O ] - [-o output-filename] [-V output_version] input_filename - - -The "output_version" defines what version of the "blob" format will be -generated. Supported versions are 1,2,3 and 16. The default is -currently version 3 but that may change in the future to version 16. - -Additionally, dtc performs various sanity checks on the tree, like the -uniqueness of linux, phandle properties, validity of strings, etc... - -The format of the .dts "source" file is "C" like, supports C and C++ -style comments. - -/ { -} - -The above is the "device-tree" definition. It's the only statement -supported currently at the toplevel. - -/ { - property1 = "string_value"; /* define a property containing a 0 - * terminated string - */ - - property2 = <1234abcd>; /* define a property containing a - * numerical 32-bit value (hexadecimal) - */ - - property3 = <12345678 12345678 deadbeef>; - /* define a property containing 3 - * numerical 32-bit values (cells) in - * hexadecimal - */ - property4 = [0a 0b 0c 0d de ea ad be ef]; - /* define a property whose content is - * an arbitrary array of bytes - */ - - childnode@address { /* define a child node named "childnode" - * whose unit name is "childnode at - * address" - */ - - childprop = "hello\n"; /* define a property "childprop" of - * childnode (in this case, a string) - */ - }; -}; - -Nodes can contain other nodes etc... thus defining the hierarchical -structure of the tree. - -Strings support common escape sequences from C: "\n", "\t", "\r", -"\(octal value)", "\x(hex value)". - -It is also suggested that you pipe your source file through cpp (gcc -preprocessor) so you can use #include's, #define for constants, etc... - -Finally, various options are planned but not yet implemented, like -automatic generation of phandles, labels (exported to the asm file so -you can point to a property content and change it easily from whatever -you link the device-tree with), label or path instead of numeric value -in some cells to "point" to a node (replaced by a phandle at compile -time), export of reserve map address to the asm file, ability to -specify reserve map content at compile time, etc... - -We may provide a .h include file with common definitions of that -proves useful for some properties (like building PCI properties or -interrupt maps) though it may be better to add a notion of struct -definitions to the compiler... - - -V - Recommendations for a bootloader -==================================== - - -Here are some various ideas/recommendations that have been proposed -while all this has been defined and implemented. - - - The bootloader may want to be able to use the device-tree itself - and may want to manipulate it (to add/edit some properties, - like physical memory size or kernel arguments). At this point, 2 - choices can be made. Either the bootloader works directly on the - flattened format, or the bootloader has its own internal tree - representation with pointers (similar to the kernel one) and - re-flattens the tree when booting the kernel. The former is a bit - more difficult to edit/modify, the later requires probably a bit - more code to handle the tree structure. Note that the structure - format has been designed so it's relatively easy to "insert" - properties or nodes or delete them by just memmoving things - around. It contains no internal offsets or pointers for this - purpose. - - - An example of code for iterating nodes & retrieving properties - directly from the flattened tree format can be found in the kernel - file arch/ppc64/kernel/prom.c, look at scan_flat_dt() function, - its usage in early_init_devtree(), and the corresponding various - early_init_dt_scan_*() callbacks. That code can be re-used in a - GPL bootloader, and as the author of that code, I would be happy - to discuss possible free licensing to any vendor who wishes to - integrate all or part of this code into a non-GPL bootloader. - - - -VI - System-on-a-chip devices and nodes -======================================= - -Many companies are now starting to develop system-on-a-chip -processors, where the processor core (CPU) and many peripheral devices -exist on a single piece of silicon. For these SOCs, an SOC node -should be used that defines child nodes for the devices that make -up the SOC. While platforms are not required to use this model in -order to boot the kernel, it is highly encouraged that all SOC -implementations define as complete a flat-device-tree as possible to -describe the devices on the SOC. This will allow for the -genericization of much of the kernel code. - - -1) Defining child nodes of an SOC ---------------------------------- - -Each device that is part of an SOC may have its own node entry inside -the SOC node. For each device that is included in the SOC, the unit -address property represents the address offset for this device's -memory-mapped registers in the parent's address space. The parent's -address space is defined by the "ranges" property in the top-level soc -node. The "reg" property for each node that exists directly under the -SOC node should contain the address mapping from the child address space -to the parent SOC address space and the size of the device's -memory-mapped register file. - -For many devices that may exist inside an SOC, there are predefined -specifications for the format of the device tree node. All SOC child -nodes should follow these specifications, except where noted in this -document. - -See appendix A for an example partial SOC node definition for the -MPC8540. - - -2) Representing devices without a current OF specification ----------------------------------------------------------- - -Currently, there are many devices on SOCs that do not have a standard -representation pre-defined as part of the open firmware -specifications, mainly because the boards that contain these SOCs are -not currently booted using open firmware. This section contains -descriptions for the SOC devices for which new nodes have been -defined; this list will expand as more and more SOC-containing -platforms are moved over to use the flattened-device-tree model. - -VII - Specifying interrupt information for devices -=================================================== - -The device tree represents the busses and devices of a hardware -system in a form similar to the physical bus topology of the -hardware. - -In addition, a logical 'interrupt tree' exists which represents the -hierarchy and routing of interrupts in the hardware. - -The interrupt tree model is fully described in the -document "Open Firmware Recommended Practice: Interrupt -Mapping Version 0.9". The document is available at: -. - -1) interrupts property ----------------------- - -Devices that generate interrupts to a single interrupt controller -should use the conventional OF representation described in the -OF interrupt mapping documentation. - -Each device which generates interrupts must have an 'interrupt' -property. The interrupt property value is an arbitrary number of -of 'interrupt specifier' values which describe the interrupt or -interrupts for the device. - -The encoding of an interrupt specifier is determined by the -interrupt domain in which the device is located in the -interrupt tree. The root of an interrupt domain specifies in -its #interrupt-cells property the number of 32-bit cells -required to encode an interrupt specifier. See the OF interrupt -mapping documentation for a detailed description of domains. - -For example, the binding for the OpenPIC interrupt controller -specifies an #interrupt-cells value of 2 to encode the interrupt -number and level/sense information. All interrupt children in an -OpenPIC interrupt domain use 2 cells per interrupt in their interrupts -property. - -The PCI bus binding specifies a #interrupt-cell value of 1 to encode -which interrupt pin (INTA,INTB,INTC,INTD) is used. - -2) interrupt-parent property ----------------------------- - -The interrupt-parent property is specified to define an explicit -link between a device node and its interrupt parent in -the interrupt tree. The value of interrupt-parent is the -phandle of the parent node. - -If the interrupt-parent property is not defined for a node, its -interrupt parent is assumed to be an ancestor in the node's -_device tree_ hierarchy. - -3) OpenPIC Interrupt Controllers --------------------------------- - -OpenPIC interrupt controllers require 2 cells to encode -interrupt information. The first cell defines the interrupt -number. The second cell defines the sense and level -information. - -Sense and level information should be encoded as follows: - - 0 = low to high edge sensitive type enabled - 1 = active low level sensitive type enabled - 2 = active high level sensitive type enabled - 3 = high to low edge sensitive type enabled - -4) ISA Interrupt Controllers ----------------------------- - -ISA PIC interrupt controllers require 2 cells to encode -interrupt information. The first cell defines the interrupt -number. The second cell defines the sense and level -information. - -ISA PIC interrupt controllers should adhere to the ISA PIC -encodings listed below: - - 0 = active low level sensitive type enabled - 1 = active high level sensitive type enabled - 2 = high to low edge sensitive type enabled - 3 = low to high edge sensitive type enabled - -VIII - Specifying Device Power Management Information (sleep property) -=================================================================== - -Devices on SOCs often have mechanisms for placing devices into low-power -states that are decoupled from the devices' own register blocks. Sometimes, -this information is more complicated than a cell-index property can -reasonably describe. Thus, each device controlled in such a manner -may contain a "sleep" property which describes these connections. - -The sleep property consists of one or more sleep resources, each of -which consists of a phandle to a sleep controller, followed by a -controller-specific sleep specifier of zero or more cells. - -The semantics of what type of low power modes are possible are defined -by the sleep controller. Some examples of the types of low power modes -that may be supported are: - - - Dynamic: The device may be disabled or enabled at any time. - - System Suspend: The device may request to be disabled or remain - awake during system suspend, but will not be disabled until then. - - Permanent: The device is disabled permanently (until the next hard - reset). - -Some devices may share a clock domain with each other, such that they should -only be suspended when none of the devices are in use. Where reasonable, -such nodes should be placed on a virtual bus, where the bus has the sleep -property. If the clock domain is shared among devices that cannot be -reasonably grouped in this manner, then create a virtual sleep controller -(similar to an interrupt nexus, except that defining a standardized -sleep-map should wait until its necessity is demonstrated). - -Appendix A - Sample SOC node for MPC8540 -======================================== - - soc@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8540-ccsr", "simple-bus"; - device_type = "soc"; - ranges = <0x00000000 0xe0000000 0x00100000> - bus-frequency = <0>; - interrupt-parent = <&pic>; - - ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar", "simple-bus"; - reg = <0x24000 0x1000>; - local-mac-address = [ 00 E0 0C 00 73 00 ]; - interrupts = <29 2 30 2 34 2>; - phy-handle = <&phy0>; - sleep = <&pmc 00000080>; - ranges; - - mdio@24520 { - reg = <0x24520 0x20>; - compatible = "fsl,gianfar-mdio"; - - phy0: ethernet-phy@0 { - interrupts = <5 1>; - reg = <0>; - device_type = "ethernet-phy"; - }; - - phy1: ethernet-phy@1 { - interrupts = <5 1>; - reg = <1>; - device_type = "ethernet-phy"; - }; - - phy3: ethernet-phy@3 { - interrupts = <7 1>; - reg = <3>; - device_type = "ethernet-phy"; - }; - }; - }; - - ethernet@25000 { - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - local-mac-address = [ 00 E0 0C 00 73 01 ]; - interrupts = <13 2 14 2 18 2>; - phy-handle = <&phy1>; - sleep = <&pmc 00000040>; - }; - - ethernet@26000 { - device_type = "network"; - model = "FEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - local-mac-address = [ 00 E0 0C 00 73 02 ]; - interrupts = <41 2>; - phy-handle = <&phy3>; - sleep = <&pmc 00000020>; - }; - - serial@4500 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8540-duart", "simple-bus"; - sleep = <&pmc 00000002>; - ranges; - - serial@4500 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - }; - - serial@4600 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - }; - }; - - pic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - - i2c@3000 { - interrupts = <43 2>; - reg = <0x3000 0x100>; - compatible = "fsl-i2c"; - dfsrr; - sleep = <&pmc 00000004>; - }; - - pmc: power@e0070 { - compatible = "fsl,mpc8540-pmc", "fsl,mpc8548-pmc"; - reg = <0xe0070 0x20>; - }; - }; diff --git a/Documentation/powerpc/dts-bindings/4xx/cpm.txt b/Documentation/powerpc/dts-bindings/4xx/cpm.txt deleted file mode 100644 index ee459806d35..00000000000 --- a/Documentation/powerpc/dts-bindings/4xx/cpm.txt +++ /dev/null @@ -1,52 +0,0 @@ -PPC4xx Clock Power Management (CPM) node - -Required properties: - - compatible : compatible list, currently only "ibm,cpm" - - dcr-access-method : "native" - - dcr-reg : < DCR register range > - -Optional properties: - - er-offset : All 4xx SoCs with a CPM controller have - one of two different order for the CPM - registers. Some have the CPM registers - in the following order (ER,FR,SR). The - others have them in the following order - (SR,ER,FR). For the second case set - er-offset = <1>. - - unused-units : specifier consist of one cell. For each - bit in the cell, the corresponding bit - in CPM will be set to turn off unused - devices. - - idle-doze : specifier consist of one cell. For each - bit in the cell, the corresponding bit - in CPM will be set to turn off unused - devices. This is usually just CPM[CPU]. - - standby : specifier consist of one cell. For each - bit in the cell, the corresponding bit - in CPM will be set on standby and - restored on resume. - - suspend : specifier consist of one cell. For each - bit in the cell, the corresponding bit - in CPM will be set on suspend (mem) and - restored on resume. Note, for standby - and suspend the corresponding bits can - be different or the same. Usually for - standby only class 2 and 3 units are set. - However, the interface does not care. - If they are the same, the additional - power saving will be seeing if support - is available to put the DDR in self - refresh mode and any additional power - saving techniques for the specific SoC. - -Example: - CPM0: cpm { - compatible = "ibm,cpm"; - dcr-access-method = "native"; - dcr-reg = <0x160 0x003>; - er-offset = <0>; - unused-units = <0x00000100>; - idle-doze = <0x02000000>; - standby = <0xfeff0000>; - suspend = <0xfeff791d>; -}; diff --git a/Documentation/powerpc/dts-bindings/4xx/emac.txt b/Documentation/powerpc/dts-bindings/4xx/emac.txt deleted file mode 100644 index 2161334a7ca..00000000000 --- a/Documentation/powerpc/dts-bindings/4xx/emac.txt +++ /dev/null @@ -1,148 +0,0 @@ - 4xx/Axon EMAC ethernet nodes - - The EMAC ethernet controller in IBM and AMCC 4xx chips, and also - the Axon bridge. To operate this needs to interact with a ths - special McMAL DMA controller, and sometimes an RGMII or ZMII - interface. In addition to the nodes and properties described - below, the node for the OPB bus on which the EMAC sits must have a - correct clock-frequency property. - - i) The EMAC node itself - - Required properties: - - device_type : "network" - - - compatible : compatible list, contains 2 entries, first is - "ibm,emac-CHIP" where CHIP is the host ASIC (440gx, - 405gp, Axon) and second is either "ibm,emac" or - "ibm,emac4". For Axon, thus, we have: "ibm,emac-axon", - "ibm,emac4" - - interrupts : - - interrupt-parent : optional, if needed for interrupt mapping - - reg : - - local-mac-address : 6 bytes, MAC address - - mal-device : phandle of the associated McMAL node - - mal-tx-channel : 1 cell, index of the tx channel on McMAL associated - with this EMAC - - mal-rx-channel : 1 cell, index of the rx channel on McMAL associated - with this EMAC - - cell-index : 1 cell, hardware index of the EMAC cell on a given - ASIC (typically 0x0 and 0x1 for EMAC0 and EMAC1 on - each Axon chip) - - max-frame-size : 1 cell, maximum frame size supported in bytes - - rx-fifo-size : 1 cell, Rx fifo size in bytes for 10 and 100 Mb/sec - operations. - For Axon, 2048 - - tx-fifo-size : 1 cell, Tx fifo size in bytes for 10 and 100 Mb/sec - operations. - For Axon, 2048. - - fifo-entry-size : 1 cell, size of a fifo entry (used to calculate - thresholds). - For Axon, 0x00000010 - - mal-burst-size : 1 cell, MAL burst size (used to calculate thresholds) - in bytes. - For Axon, 0x00000100 (I think ...) - - phy-mode : string, mode of operations of the PHY interface. - Supported values are: "mii", "rmii", "smii", "rgmii", - "tbi", "gmii", rtbi", "sgmii". - For Axon on CAB, it is "rgmii" - - mdio-device : 1 cell, required iff using shared MDIO registers - (440EP). phandle of the EMAC to use to drive the - MDIO lines for the PHY used by this EMAC. - - zmii-device : 1 cell, required iff connected to a ZMII. phandle of - the ZMII device node - - zmii-channel : 1 cell, required iff connected to a ZMII. Which ZMII - channel or 0xffffffff if ZMII is only used for MDIO. - - rgmii-device : 1 cell, required iff connected to an RGMII. phandle - of the RGMII device node. - For Axon: phandle of plb5/plb4/opb/rgmii - - rgmii-channel : 1 cell, required iff connected to an RGMII. Which - RGMII channel is used by this EMAC. - Fox Axon: present, whatever value is appropriate for each - EMAC, that is the content of the current (bogus) "phy-port" - property. - - Optional properties: - - phy-address : 1 cell, optional, MDIO address of the PHY. If absent, - a search is performed. - - phy-map : 1 cell, optional, bitmap of addresses to probe the PHY - for, used if phy-address is absent. bit 0x00000001 is - MDIO address 0. - For Axon it can be absent, though my current driver - doesn't handle phy-address yet so for now, keep - 0x00ffffff in it. - - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec - operations (if absent the value is the same as - rx-fifo-size). For Axon, either absent or 2048. - - tx-fifo-size-gige : 1 cell, Tx fifo size in bytes for 1000 Mb/sec - operations (if absent the value is the same as - tx-fifo-size). For Axon, either absent or 2048. - - tah-device : 1 cell, optional. If connected to a TAH engine for - offload, phandle of the TAH device node. - - tah-channel : 1 cell, optional. If appropriate, channel used on the - TAH engine. - - Example: - - EMAC0: ethernet@40000800 { - device_type = "network"; - compatible = "ibm,emac-440gp", "ibm,emac"; - interrupt-parent = <&UIC1>; - interrupts = <1c 4 1d 4>; - reg = <40000800 70>; - local-mac-address = [00 04 AC E3 1B 1E]; - mal-device = <&MAL0>; - mal-tx-channel = <0 1>; - mal-rx-channel = <0>; - cell-index = <0>; - max-frame-size = <5dc>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; - phy-mode = "rmii"; - phy-map = <00000001>; - zmii-device = <&ZMII0>; - zmii-channel = <0>; - }; - - ii) McMAL node - - Required properties: - - device_type : "dma-controller" - - compatible : compatible list, containing 2 entries, first is - "ibm,mcmal-CHIP" where CHIP is the host ASIC (like - emac) and the second is either "ibm,mcmal" or - "ibm,mcmal2". - For Axon, "ibm,mcmal-axon","ibm,mcmal2" - - interrupts : . - For Axon: This is _different_ from the current - firmware. We use the "delayed" interrupts for txeob - and rxeob. Thus we end up with mapping those 5 MPIC - interrupts, all level positive sensitive: 10, 11, 32, - 33, 34 (in decimal) - - dcr-reg : < DCR registers range > - - dcr-parent : if needed for dcr-reg - - num-tx-chans : 1 cell, number of Tx channels - - num-rx-chans : 1 cell, number of Rx channels - - iii) ZMII node - - Required properties: - - compatible : compatible list, containing 2 entries, first is - "ibm,zmii-CHIP" where CHIP is the host ASIC (like - EMAC) and the second is "ibm,zmii". - For Axon, there is no ZMII node. - - reg : - - iv) RGMII node - - Required properties: - - compatible : compatible list, containing 2 entries, first is - "ibm,rgmii-CHIP" where CHIP is the host ASIC (like - EMAC) and the second is "ibm,rgmii". - For Axon, "ibm,rgmii-axon","ibm,rgmii" - - reg : - - revision : as provided by the RGMII new version register if - available. - For Axon: 0x0000012a - diff --git a/Documentation/powerpc/dts-bindings/4xx/ndfc.txt b/Documentation/powerpc/dts-bindings/4xx/ndfc.txt deleted file mode 100644 index 869f0b5f16e..00000000000 --- a/Documentation/powerpc/dts-bindings/4xx/ndfc.txt +++ /dev/null @@ -1,39 +0,0 @@ -AMCC NDFC (NanD Flash Controller) - -Required properties: -- compatible : "ibm,ndfc". -- reg : should specify chip select and size used for the chip (0x2000). - -Optional properties: -- ccr : NDFC config and control register value (default 0). -- bank-settings : NDFC bank configuration register value (default 0). - -Notes: -- partition(s) - follows the OF MTD standard for partitions - -Example: - -ndfc@1,0 { - compatible = "ibm,ndfc"; - reg = <0x00000001 0x00000000 0x00002000>; - ccr = <0x00001000>; - bank-settings = <0x80002222>; - #address-cells = <1>; - #size-cells = <1>; - - nand { - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "kernel"; - reg = <0x00000000 0x00200000>; - }; - partition@200000 { - label = "root"; - reg = <0x00200000 0x03E00000>; - }; - }; -}; - - diff --git a/Documentation/powerpc/dts-bindings/4xx/ppc440spe-adma.txt b/Documentation/powerpc/dts-bindings/4xx/ppc440spe-adma.txt deleted file mode 100644 index 515ebcf1b97..00000000000 --- a/Documentation/powerpc/dts-bindings/4xx/ppc440spe-adma.txt +++ /dev/null @@ -1,93 +0,0 @@ -PPC440SPe DMA/XOR (DMA Controller and XOR Accelerator) - -Device nodes needed for operation of the ppc440spe-adma driver -are specified hereby. These are I2O/DMA, DMA and XOR nodes -for DMA engines and Memory Queue Module node. The latter is used -by ADMA driver for configuration of RAID-6 H/W capabilities of -the PPC440SPe. In addition to the nodes and properties described -below, the ranges property of PLB node must specify ranges for -DMA devices. - - i) The I2O node - - Required properties: - - - compatible : "ibm,i2o-440spe"; - - reg : - - dcr-reg : - - Example: - - I2O: i2o@400100000 { - compatible = "ibm,i2o-440spe"; - reg = <0x00000004 0x00100000 0x100>; - dcr-reg = <0x060 0x020>; - }; - - - ii) The DMA node - - Required properties: - - - compatible : "ibm,dma-440spe"; - - cell-index : 1 cell, hardware index of the DMA engine - (typically 0x0 and 0x1 for DMA0 and DMA1) - - reg : - - dcr-reg : - - interrupts : . - - interrupt-parent : needed for interrupt mapping - - Example: - - DMA0: dma0@400100100 { - compatible = "ibm,dma-440spe"; - cell-index = <0>; - reg = <0x00000004 0x00100100 0x100>; - dcr-reg = <0x060 0x020>; - interrupt-parent = <&DMA0>; - interrupts = <0 1>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = < - 0 &UIC0 0x14 4 - 1 &UIC1 0x16 4>; - }; - - - iii) XOR Accelerator node - - Required properties: - - - compatible : "amcc,xor-accelerator"; - - reg : - - interrupts : - - interrupt-parent : for interrupt mapping - - Example: - - xor-accel@400200000 { - compatible = "amcc,xor-accelerator"; - reg = <0x00000004 0x00200000 0x400>; - interrupt-parent = <&UIC1>; - interrupts = <0x1f 4>; - }; - - - iv) Memory Queue Module node - - Required properties: - - - compatible : "ibm,mq-440spe"; - - dcr-reg : - - Example: - - MQ0: mq { - compatible = "ibm,mq-440spe"; - dcr-reg = <0x040 0x020>; - }; - diff --git a/Documentation/powerpc/dts-bindings/4xx/reboot.txt b/Documentation/powerpc/dts-bindings/4xx/reboot.txt deleted file mode 100644 index d7217260589..00000000000 --- a/Documentation/powerpc/dts-bindings/4xx/reboot.txt +++ /dev/null @@ -1,18 +0,0 @@ -Reboot property to control system reboot on PPC4xx systems: - -By setting "reset_type" to one of the following values, the default -software reset mechanism may be overidden. Here the possible values of -"reset_type": - - 1 - PPC4xx core reset - 2 - PPC4xx chip reset - 3 - PPC4xx system reset (default) - -Example: - - cpu@0 { - device_type = "cpu"; - model = "PowerPC,440SPe"; - ... - reset-type = <2>; /* Use chip-reset */ - }; diff --git a/Documentation/powerpc/dts-bindings/can/sja1000.txt b/Documentation/powerpc/dts-bindings/can/sja1000.txt deleted file mode 100644 index d6d209ded93..00000000000 --- a/Documentation/powerpc/dts-bindings/can/sja1000.txt +++ /dev/null @@ -1,53 +0,0 @@ -Memory mapped SJA1000 CAN controller from NXP (formerly Philips) - -Required properties: - -- compatible : should be "nxp,sja1000". - -- reg : should specify the chip select, address offset and size required - to map the registers of the SJA1000. The size is usually 0x80. - -- interrupts: property with a value describing the interrupt source - (number and sensitivity) required for the SJA1000. - -Optional properties: - -- nxp,external-clock-frequency : Frequency of the external oscillator - clock in Hz. Note that the internal clock frequency used by the - SJA1000 is half of that value. If not specified, a default value - of 16000000 (16 MHz) is used. - -- nxp,tx-output-mode : operation mode of the TX output control logic: - <0x0> : bi-phase output mode - <0x1> : normal output mode (default) - <0x2> : test output mode - <0x3> : clock output mode - -- nxp,tx-output-config : TX output pin configuration: - <0x01> : TX0 invert - <0x02> : TX0 pull-down (default) - <0x04> : TX0 pull-up - <0x06> : TX0 push-pull - <0x08> : TX1 invert - <0x10> : TX1 pull-down - <0x20> : TX1 pull-up - <0x30> : TX1 push-pull - -- nxp,clock-out-frequency : clock frequency in Hz on the CLKOUT pin. - If not specified or if the specified value is 0, the CLKOUT pin - will be disabled. - -- nxp,no-comparator-bypass : Allows to disable the CAN input comperator. - -For futher information, please have a look to the SJA1000 data sheet. - -Examples: - -can@3,100 { - compatible = "nxp,sja1000"; - reg = <3 0x100 0x80>; - interrupts = <2 0>; - interrupt-parent = <&mpic>; - nxp,external-clock-frequency = <16000000>; -}; - diff --git a/Documentation/powerpc/dts-bindings/ecm.txt b/Documentation/powerpc/dts-bindings/ecm.txt deleted file mode 100644 index f514f29c67d..00000000000 --- a/Documentation/powerpc/dts-bindings/ecm.txt +++ /dev/null @@ -1,64 +0,0 @@ -===================================================================== -E500 LAW & Coherency Module Device Tree Binding -Copyright (C) 2009 Freescale Semiconductor Inc. -===================================================================== - -Local Access Window (LAW) Node - -The LAW node represents the region of CCSR space where local access -windows are configured. For ECM based devices this is the first 4k -of CCSR space that includes CCSRBAR, ALTCBAR, ALTCAR, BPTR, and some -number of local access windows as specified by fsl,num-laws. - -PROPERTIES - - - compatible - Usage: required - Value type: - Definition: Must include "fsl,ecm-law" - - - reg - Usage: required - Value type: - Definition: A standard property. The value specifies the - physical address offset and length of the CCSR space - registers. - - - fsl,num-laws - Usage: required - Value type: - Definition: The value specifies the number of local access - windows for this device. - -===================================================================== - -E500 Coherency Module Node - -The E500 LAW node represents the region of CCSR space where ECM config -and error reporting registers exist, this is the second 4k (0x1000) -of CCSR space. - -PROPERTIES - - - compatible - Usage: required - Value type: - Definition: Must include "fsl,CHIP-ecm", "fsl,ecm" where - CHIP is the processor (mpc8572, mpc8544, etc.) - - - reg - Usage: required - Value type: - Definition: A standard property. The value specifies the - physical address offset and length of the CCSR space - registers. - - - interrupts - Usage: required - Value type: - - - interrupt-parent - Usage: required - Value type: - -===================================================================== diff --git a/Documentation/powerpc/dts-bindings/eeprom.txt b/Documentation/powerpc/dts-bindings/eeprom.txt deleted file mode 100644 index 4342c10de1b..00000000000 --- a/Documentation/powerpc/dts-bindings/eeprom.txt +++ /dev/null @@ -1,28 +0,0 @@ -EEPROMs (I2C) - -Required properties: - - - compatible : should be "," - If there is no specific driver for , a generic - driver based on is selected. Possible types are: - 24c00, 24c01, 24c02, 24c04, 24c08, 24c16, 24c32, 24c64, - 24c128, 24c256, 24c512, 24c1024, spd - - - reg : the I2C address of the EEPROM - -Optional properties: - - - pagesize : the length of the pagesize for writing. Please consult the - manual of your device, that value varies a lot. A wrong value - may result in data loss! If not specified, a safety value of - '1' is used which will be very slow. - - - read-only: this parameterless property disables writes to the eeprom - -Example: - -eeprom@52 { - compatible = "atmel,24c32"; - reg = <0x52>; - pagesize = <32>; -}; diff --git a/Documentation/powerpc/dts-bindings/fsl/83xx-512x-pci.txt b/Documentation/powerpc/dts-bindings/fsl/83xx-512x-pci.txt deleted file mode 100644 index 35a46536240..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/83xx-512x-pci.txt +++ /dev/null @@ -1,40 +0,0 @@ -* Freescale 83xx and 512x PCI bridges - -Freescale 83xx and 512x SOCs include the same pci bridge core. - -83xx/512x specific notes: -- reg: should contain two address length tuples - The first is for the internal pci bridge registers - The second is for the pci config space access registers - -Example (MPC8313ERDB) - pci0: pci@e0008500 { - cell-index = <1>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0E -mini PCI */ - 0x7000 0x0 0x0 0x1 &ipic 18 0x8 - 0x7000 0x0 0x0 0x2 &ipic 18 0x8 - 0x7000 0x0 0x0 0x3 &ipic 18 0x8 - 0x7000 0x0 0x0 0x4 &ipic 18 0x8 - - /* IDSEL 0x0F - PCI slot */ - 0x7800 0x0 0x0 0x1 &ipic 17 0x8 - 0x7800 0x0 0x0 0x2 &ipic 18 0x8 - 0x7800 0x0 0x0 0x3 &ipic 17 0x8 - 0x7800 0x0 0x0 0x4 &ipic 18 0x8>; - interrupt-parent = <&ipic>; - interrupts = <66 0x8>; - bus-range = <0x0 0x0>; - ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 - 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 - 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; - clock-frequency = <66666666>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0008500 0x100 /* internal registers */ - 0xe0008300 0x8>; /* config space access registers */ - compatible = "fsl,mpc8349-pci"; - device_type = "pci"; - }; diff --git a/Documentation/powerpc/dts-bindings/fsl/8xxx_gpio.txt b/Documentation/powerpc/dts-bindings/fsl/8xxx_gpio.txt deleted file mode 100644 index b0019eb5330..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/8xxx_gpio.txt +++ /dev/null @@ -1,60 +0,0 @@ -GPIO controllers on MPC8xxx SoCs - -This is for the non-QE/CPM/GUTs GPIO controllers as found on -8349, 8572, 8610 and compatible. - -Every GPIO controller node must have #gpio-cells property defined, -this information will be used to translate gpio-specifiers. - -Required properties: -- compatible : "fsl,-gpio" followed by "fsl,mpc8349-gpio" for - 83xx, "fsl,mpc8572-gpio" for 85xx and "fsl,mpc8610-gpio" for 86xx. -- #gpio-cells : Should be two. The first cell is the pin number and the - second cell is used to specify optional parameters (currently unused). - - interrupts : Interrupt mapping for GPIO IRQ. - - interrupt-parent : Phandle for the interrupt controller that - services interrupts for this device. -- gpio-controller : Marks the port as GPIO controller. - -Example of gpio-controller nodes for a MPC8347 SoC: - - gpio1: gpio-controller@c00 { - #gpio-cells = <2>; - compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio"; - reg = <0xc00 0x100>; - interrupts = <74 0x8>; - interrupt-parent = <&ipic>; - gpio-controller; - }; - - gpio2: gpio-controller@d00 { - #gpio-cells = <2>; - compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio"; - reg = <0xd00 0x100>; - interrupts = <75 0x8>; - interrupt-parent = <&ipic>; - gpio-controller; - }; - -See booting-without-of.txt for details of how to specify GPIO -information for devices. - -To use GPIO pins as interrupt sources for peripherals, specify the -GPIO controller as the interrupt parent and define GPIO number + -trigger mode using the interrupts property, which is defined like -this: - -interrupts = , where: - - number: GPIO pin (0..31) - - trigger: trigger mode: - 2 = trigger on falling edge - 3 = trigger on both edges - -Example of device using this is: - - funkyfpga@0 { - compatible = "funky-fpga"; - ... - interrupts = <4 3>; - interrupt-parent = <&gpio1>; - }; diff --git a/Documentation/powerpc/dts-bindings/fsl/board.txt b/Documentation/powerpc/dts-bindings/fsl/board.txt deleted file mode 100644 index 39e941515a3..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/board.txt +++ /dev/null @@ -1,63 +0,0 @@ -* Board Control and Status (BCSR) - -Required properties: - - - compatible : Should be "fsl,-bcsr" - - reg : Offset and length of the register set for the device - -Example: - - bcsr@f8000000 { - compatible = "fsl,mpc8360mds-bcsr"; - reg = ; - }; - -* Freescale on board FPGA - -This is the memory-mapped registers for on board FPGA. - -Required properities: -- compatible : should be "fsl,fpga-pixis". -- reg : should contain the address and the length of the FPPGA register - set. -- interrupt-parent: should specify phandle for the interrupt controller. -- interrupts : should specify event (wakeup) IRQ. - -Example (MPC8610HPCD): - - board-control@e8000000 { - compatible = "fsl,fpga-pixis"; - reg = <0xe8000000 32>; - interrupt-parent = <&mpic>; - interrupts = <8 8>; - }; - -* Freescale BCSR GPIO banks - -Some BCSR registers act as simple GPIO controllers, each such -register can be represented by the gpio-controller node. - -Required properities: -- compatible : Should be "fsl,-bcsr-gpio". -- reg : Should contain the address and the length of the GPIO bank - register. -- #gpio-cells : Should be two. The first cell is the pin number and the - second cell is used to specify optional parameters (currently unused). -- gpio-controller : Marks the port as GPIO controller. - -Example: - - bcsr@1,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8360mds-bcsr"; - reg = <1 0 0x8000>; - ranges = <0 1 0 0x8000>; - - bcsr13: gpio-controller@d { - #gpio-cells = <2>; - compatible = "fsl,mpc8360mds-bcsr-gpio"; - reg = <0xd 1>; - gpio-controller; - }; - }; diff --git a/Documentation/powerpc/dts-bindings/fsl/can.txt b/Documentation/powerpc/dts-bindings/fsl/can.txt deleted file mode 100644 index 2fa4fcd38fd..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/can.txt +++ /dev/null @@ -1,53 +0,0 @@ -CAN Device Tree Bindings ------------------------- - -(c) 2006-2009 Secret Lab Technologies Ltd -Grant Likely - -fsl,mpc5200-mscan nodes ------------------------ -In addition to the required compatible-, reg- and interrupt-properties, you can -also specify which clock source shall be used for the controller: - -- fsl,mscan-clock-source : a string describing the clock source. Valid values - are: "ip" for ip bus clock - "ref" for reference clock (XTAL) - "ref" is default in case this property is not - present. - -fsl,mpc5121-mscan nodes ------------------------ -In addition to the required compatible-, reg- and interrupt-properties, you can -also specify which clock source and divider shall be used for the controller: - -- fsl,mscan-clock-source : a string describing the clock source. Valid values - are: "ip" for ip bus clock - "ref" for reference clock - "sys" for system clock - If this property is not present, an optimal CAN - clock source and frequency based on the system - clock will be selected. If this is not possible, - the reference clock will be used. - -- fsl,mscan-clock-divider: for the reference and system clock, an additional - clock divider can be specified. By default, a - value of 1 is used. - -Note that the MPC5121 Rev. 1 processor is not supported. - -Examples: - can@1300 { - compatible = "fsl,mpc5121-mscan"; - interrupts = <12 0x8>; - interrupt-parent = <&ipic>; - reg = <0x1300 0x80>; - }; - - can@1380 { - compatible = "fsl,mpc5121-mscan"; - interrupts = <13 0x8>; - interrupt-parent = <&ipic>; - reg = <0x1380 0x80>; - fsl,mscan-clock-source = "ref"; - fsl,mscan-clock-divider = <3>; - }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt deleted file mode 100644 index 160c752484b..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt +++ /dev/null @@ -1,67 +0,0 @@ -* Freescale Communications Processor Module - -NOTE: This is an interim binding, and will likely change slightly, -as more devices are supported. The QE bindings especially are -incomplete. - -* Root CPM node - -Properties: -- compatible : "fsl,cpm1", "fsl,cpm2", or "fsl,qe". -- reg : A 48-byte region beginning with CPCR. - -Example: - cpm@119c0 { - #address-cells = <1>; - #size-cells = <1>; - #interrupt-cells = <2>; - compatible = "fsl,mpc8272-cpm", "fsl,cpm2"; - reg = <119c0 30>; - } - -* Properties common to multiple CPM/QE devices - -- fsl,cpm-command : This value is ORed with the opcode and command flag - to specify the device on which a CPM command operates. - -- fsl,cpm-brg : Indicates which baud rate generator the device - is associated with. If absent, an unused BRG - should be dynamically allocated. If zero, the - device uses an external clock rather than a BRG. - -- reg : Unless otherwise specified, the first resource represents the - scc/fcc/ucc registers, and the second represents the device's - parameter RAM region (if it has one). - -* Multi-User RAM (MURAM) - -The multi-user/dual-ported RAM is expressed as a bus under the CPM node. - -Ranges must be set up subject to the following restrictions: - -- Children's reg nodes must be offsets from the start of all muram, even - if the user-data area does not begin at zero. -- If multiple range entries are used, the difference between the parent - address and the child address must be the same in all, so that a single - mapping can cover them all while maintaining the ability to determine - CPM-side offsets with pointer subtraction. It is recommended that - multiple range entries not be used. -- A child address of zero must be translatable, even if no reg resources - contain it. - -A child "data" node must exist, compatible with "fsl,cpm-muram-data", to -indicate the portion of muram that is usable by the OS for arbitrary -purposes. The data node may have an arbitrary number of reg resources, -all of which contribute to the allocatable muram pool. - -Example, based on mpc8272: - muram@0 { - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 10000>; - - data@0 { - compatible = "fsl,cpm-muram-data"; - reg = <0 2000 9800 800>; - }; - }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/brg.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/brg.txt deleted file mode 100644 index 4c7d45eaf02..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/brg.txt +++ /dev/null @@ -1,21 +0,0 @@ -* Baud Rate Generators - -Currently defined compatibles: -fsl,cpm-brg -fsl,cpm1-brg -fsl,cpm2-brg - -Properties: -- reg : There may be an arbitrary number of reg resources; BRG - numbers are assigned to these in order. -- clock-frequency : Specifies the base frequency driving - the BRG. - -Example: - brg@119f0 { - compatible = "fsl,mpc8272-brg", - "fsl,cpm2-brg", - "fsl,cpm-brg"; - reg = <119f0 10 115f0 10>; - clock-frequency = ; - }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/i2c.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/i2c.txt deleted file mode 100644 index 87bc6048667..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/i2c.txt +++ /dev/null @@ -1,41 +0,0 @@ -* I2C - -The I2C controller is expressed as a bus under the CPM node. - -Properties: -- compatible : "fsl,cpm1-i2c", "fsl,cpm2-i2c" -- reg : On CPM2 devices, the second resource doesn't specify the I2C - Parameter RAM itself, but the I2C_BASE field of the CPM2 Parameter RAM - (typically 0x8afc 0x2). -- #address-cells : Should be one. The cell is the i2c device address with - the r/w bit set to zero. -- #size-cells : Should be zero. -- clock-frequency : Can be used to set the i2c clock frequency. If - unspecified, a default frequency of 60kHz is being used. -The following two properties are deprecated. They are only used by legacy -i2c drivers to find the bus to probe: -- linux,i2c-index : Can be used to hard code an i2c bus number. By default, - the bus number is dynamically assigned by the i2c core. -- linux,i2c-class : Can be used to override the i2c class. The class is used - by legacy i2c device drivers to find a bus in a specific context like - system management, video or sound. By default, I2C_CLASS_HWMON (1) is - being used. The definition of the classes can be found in - include/i2c/i2c.h - -Example, based on mpc823: - - i2c@860 { - compatible = "fsl,mpc823-i2c", - "fsl,cpm1-i2c"; - reg = <0x860 0x20 0x3c80 0x30>; - interrupts = <16>; - interrupt-parent = <&CPM_PIC>; - fsl,cpm-command = <0x10>; - #address-cells = <1>; - #size-cells = <0>; - - rtc@68 { - compatible = "dallas,ds1307"; - reg = <0x68>; - }; - }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/pic.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/pic.txt deleted file mode 100644 index 8e3ee168161..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/pic.txt +++ /dev/null @@ -1,18 +0,0 @@ -* Interrupt Controllers - -Currently defined compatibles: -- fsl,cpm1-pic - - only one interrupt cell -- fsl,pq1-pic -- fsl,cpm2-pic - - second interrupt cell is level/sense: - - 2 is falling edge - - 8 is active low - -Example: - interrupt-controller@10c00 { - #interrupt-cells = <2>; - interrupt-controller; - reg = <10c00 80>; - compatible = "mpc8272-pic", "fsl,cpm2-pic"; - }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/usb.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/usb.txt deleted file mode 100644 index 74bfda4bb82..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/usb.txt +++ /dev/null @@ -1,15 +0,0 @@ -* USB (Universal Serial Bus Controller) - -Properties: -- compatible : "fsl,cpm1-usb", "fsl,cpm2-usb", "fsl,qe-usb" - -Example: - usb@11bc0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,cpm2-usb"; - reg = <11b60 18 8b00 100>; - interrupts = ; - interrupt-parent = <&PIC>; - fsl,cpm-command = <2e600000>; - }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt deleted file mode 100644 index 349f79fd707..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt +++ /dev/null @@ -1,38 +0,0 @@ -Every GPIO controller node must have #gpio-cells property defined, -this information will be used to translate gpio-specifiers. - -On CPM1 devices, all ports are using slightly different register layouts. -Ports A, C and D are 16bit ports and Ports B and E are 32bit ports. - -On CPM2 devices, all ports are 32bit ports and use a common register layout. - -Required properties: -- compatible : "fsl,cpm1-pario-bank-a", "fsl,cpm1-pario-bank-b", - "fsl,cpm1-pario-bank-c", "fsl,cpm1-pario-bank-d", - "fsl,cpm1-pario-bank-e", "fsl,cpm2-pario-bank" -- #gpio-cells : Should be two. The first cell is the pin number and the - second cell is used to specify optional parameters (currently unused). -- gpio-controller : Marks the port as GPIO controller. - -Example of three SOC GPIO banks defined as gpio-controller nodes: - - CPM1_PIO_A: gpio-controller@950 { - #gpio-cells = <2>; - compatible = "fsl,cpm1-pario-bank-a"; - reg = <0x950 0x10>; - gpio-controller; - }; - - CPM1_PIO_B: gpio-controller@ab8 { - #gpio-cells = <2>; - compatible = "fsl,cpm1-pario-bank-b"; - reg = <0xab8 0x10>; - gpio-controller; - }; - - CPM1_PIO_E: gpio-controller@ac8 { - #gpio-cells = <2>; - compatible = "fsl,cpm1-pario-bank-e"; - reg = <0xac8 0x18>; - gpio-controller; - }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/network.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/network.txt deleted file mode 100644 index 0e426944658..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/network.txt +++ /dev/null @@ -1,45 +0,0 @@ -* Network - -Currently defined compatibles: -- fsl,cpm1-scc-enet -- fsl,cpm2-scc-enet -- fsl,cpm1-fec-enet -- fsl,cpm2-fcc-enet (third resource is GFEMR) -- fsl,qe-enet - -Example: - - ethernet@11300 { - device_type = "network"; - compatible = "fsl,mpc8272-fcc-enet", - "fsl,cpm2-fcc-enet"; - reg = <11300 20 8400 100 11390 1>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <20 8>; - interrupt-parent = <&PIC>; - phy-handle = <&PHY0>; - fsl,cpm-command = <12000300>; - }; - -* MDIO - -Currently defined compatibles: -fsl,pq1-fec-mdio (reg is same as first resource of FEC device) -fsl,cpm2-mdio-bitbang (reg is port C registers) - -Properties for fsl,cpm2-mdio-bitbang: -fsl,mdio-pin : pin of port C controlling mdio data -fsl,mdc-pin : pin of port C controlling mdio clock - -Example: - mdio@10d40 { - device_type = "mdio"; - compatible = "fsl,mpc8272ads-mdio-bitbang", - "fsl,mpc8272-mdio-bitbang", - "fsl,cpm2-mdio-bitbang"; - reg = <10d40 14>; - #address-cells = <1>; - #size-cells = <0>; - fsl,mdio-pin = <12>; - fsl,mdc-pin = <13>; - }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt deleted file mode 100644 index 4f8930263dd..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt +++ /dev/null @@ -1,115 +0,0 @@ -* Freescale QUICC Engine module (QE) -This represents qe module that is installed on PowerQUICC II Pro. - -NOTE: This is an interim binding; it should be updated to fit -in with the CPM binding later in this document. - -Basically, it is a bus of devices, that could act more or less -as a complete entity (UCC, USB etc ). All of them should be siblings on -the "root" qe node, using the common properties from there. -The description below applies to the qe of MPC8360 and -more nodes and properties would be extended in the future. - -i) Root QE device - -Required properties: -- compatible : should be "fsl,qe"; -- model : precise model of the QE, Can be "QE", "CPM", or "CPM2" -- reg : offset and length of the device registers. -- bus-frequency : the clock frequency for QUICC Engine. -- fsl,qe-num-riscs: define how many RISC engines the QE has. -- fsl,qe-num-snums: define how many serial number(SNUM) the QE can use for the - threads. - -Optional properties: -- fsl,firmware-phandle: - Usage: required only if there is no fsl,qe-firmware child node - Value type: - Definition: Points to a firmware node (see "QE Firmware Node" below) - that contains the firmware that should be uploaded for this QE. - The compatible property for the firmware node should say, - "fsl,qe-firmware". - -Recommended properties -- brg-frequency : the internal clock source frequency for baud-rate - generators in Hz. - -Example: - qe@e0100000 { - #address-cells = <1>; - #size-cells = <1>; - #interrupt-cells = <2>; - compatible = "fsl,qe"; - ranges = <0 e0100000 00100000>; - reg = ; - brg-frequency = <0>; - bus-frequency = <179A7B00>; - } - -* Multi-User RAM (MURAM) - -Required properties: -- compatible : should be "fsl,qe-muram", "fsl,cpm-muram". -- mode : the could be "host" or "slave". -- ranges : Should be defined as specified in 1) to describe the - translation of MURAM addresses. -- data-only : sub-node which defines the address area under MURAM - bus that can be allocated as data/parameter - -Example: - - muram@10000 { - compatible = "fsl,qe-muram", "fsl,cpm-muram"; - ranges = <0 00010000 0000c000>; - - data-only@0{ - compatible = "fsl,qe-muram-data", - "fsl,cpm-muram-data"; - reg = <0 c000>; - }; - }; - -* QE Firmware Node - -This node defines a firmware binary that is embedded in the device tree, for -the purpose of passing the firmware from bootloader to the kernel, or from -the hypervisor to the guest. - -The firmware node itself contains the firmware binary contents, a compatible -property, and any firmware-specific properties. The node should be placed -inside a QE node that needs it. Doing so eliminates the need for a -fsl,firmware-phandle property. Other QE nodes that need the same firmware -should define an fsl,firmware-phandle property that points to the firmware node -in the first QE node. - -The fsl,firmware property can be specified in the DTS (possibly using incbin) -or can be inserted by the boot loader at boot time. - -Required properties: - - compatible - Usage: required - Value type: - Definition: A standard property. Specify a string that indicates what - kind of firmware it is. For QE, this should be "fsl,qe-firmware". - - - fsl,firmware - Usage: required - Value type: , encoded as an array of bytes - Definition: A standard property. This property contains the firmware - binary "blob". - -Example: - qe1@e0080000 { - compatible = "fsl,qe"; - qe_firmware:qe-firmware { - compatible = "fsl,qe-firmware"; - fsl,firmware = [0x70 0xcd 0x00 0x00 0x01 0x46 0x45 ...]; - }; - ... - }; - - qe2@e0090000 { - compatible = "fsl,qe"; - fsl,firmware-phandle = <&qe_firmware>; - ... - }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/firmware.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/firmware.txt deleted file mode 100644 index 249db3a15d1..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/firmware.txt +++ /dev/null @@ -1,24 +0,0 @@ -* Uploaded QE firmware - - If a new firmware has been uploaded to the QE (usually by the - boot loader), then a 'firmware' child node should be added to the QE - node. This node provides information on the uploaded firmware that - device drivers may need. - - Required properties: - - id: The string name of the firmware. This is taken from the 'id' - member of the qe_firmware structure of the uploaded firmware. - Device drivers can search this string to determine if the - firmware they want is already present. - - extended-modes: The Extended Modes bitfield, taken from the - firmware binary. It is a 64-bit number represented - as an array of two 32-bit numbers. - - virtual-traps: The virtual traps, taken from the firmware binary. - It is an array of 8 32-bit numbers. - -Example: - firmware { - id = "Soft-UART"; - extended-modes = <0 0>; - virtual-traps = <0 0 0 0 0 0 0 0>; - }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/par_io.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/par_io.txt deleted file mode 100644 index 60984260207..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/par_io.txt +++ /dev/null @@ -1,51 +0,0 @@ -* Parallel I/O Ports - -This node configures Parallel I/O ports for CPUs with QE support. -The node should reside in the "soc" node of the tree. For each -device that using parallel I/O ports, a child node should be created. -See the definition of the Pin configuration nodes below for more -information. - -Required properties: -- device_type : should be "par_io". -- reg : offset to the register set and its length. -- num-ports : number of Parallel I/O ports - -Example: -par_io@1400 { - reg = <1400 100>; - #address-cells = <1>; - #size-cells = <0>; - device_type = "par_io"; - num-ports = <7>; - ucc_pin@01 { - ...... - }; - -Note that "par_io" nodes are obsolete, and should not be used for -the new device trees. Instead, each Par I/O bank should be represented -via its own gpio-controller node: - -Required properties: -- #gpio-cells : should be "2". -- compatible : should be "fsl,-qe-pario-bank", - "fsl,mpc8323-qe-pario-bank". -- reg : offset to the register set and its length. -- gpio-controller : node to identify gpio controllers. - -Example: - qe_pio_a: gpio-controller@1400 { - #gpio-cells = <2>; - compatible = "fsl,mpc8360-qe-pario-bank", - "fsl,mpc8323-qe-pario-bank"; - reg = <0x1400 0x18>; - gpio-controller; - }; - - qe_pio_e: gpio-controller@1460 { - #gpio-cells = <2>; - compatible = "fsl,mpc8360-qe-pario-bank", - "fsl,mpc8323-qe-pario-bank"; - reg = <0x1460 0x18>; - gpio-controller; - }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/pincfg.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/pincfg.txt deleted file mode 100644 index c5b43061db3..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/pincfg.txt +++ /dev/null @@ -1,60 +0,0 @@ -* Pin configuration nodes - -Required properties: -- linux,phandle : phandle of this node; likely referenced by a QE - device. -- pio-map : array of pin configurations. Each pin is defined by 6 - integers. The six numbers are respectively: port, pin, dir, - open_drain, assignment, has_irq. - - port : port number of the pin; 0-6 represent port A-G in UM. - - pin : pin number in the port. - - dir : direction of the pin, should encode as follows: - - 0 = The pin is disabled - 1 = The pin is an output - 2 = The pin is an input - 3 = The pin is I/O - - - open_drain : indicates the pin is normal or wired-OR: - - 0 = The pin is actively driven as an output - 1 = The pin is an open-drain driver. As an output, the pin is - driven active-low, otherwise it is three-stated. - - - assignment : function number of the pin according to the Pin Assignment - tables in User Manual. Each pin can have up to 4 possible functions in - QE and two options for CPM. - - has_irq : indicates if the pin is used as source of external - interrupts. - -Example: - ucc_pin@01 { - linux,phandle = <140001>; - pio-map = < - /* port pin dir open_drain assignment has_irq */ - 0 3 1 0 1 0 /* TxD0 */ - 0 4 1 0 1 0 /* TxD1 */ - 0 5 1 0 1 0 /* TxD2 */ - 0 6 1 0 1 0 /* TxD3 */ - 1 6 1 0 3 0 /* TxD4 */ - 1 7 1 0 1 0 /* TxD5 */ - 1 9 1 0 2 0 /* TxD6 */ - 1 a 1 0 2 0 /* TxD7 */ - 0 9 2 0 1 0 /* RxD0 */ - 0 a 2 0 1 0 /* RxD1 */ - 0 b 2 0 1 0 /* RxD2 */ - 0 c 2 0 1 0 /* RxD3 */ - 0 d 2 0 1 0 /* RxD4 */ - 1 1 2 0 2 0 /* RxD5 */ - 1 0 2 0 2 0 /* RxD6 */ - 1 4 2 0 2 0 /* RxD7 */ - 0 7 1 0 1 0 /* TX_EN */ - 0 8 1 0 1 0 /* TX_ER */ - 0 f 2 0 1 0 /* RX_DV */ - 0 10 2 0 1 0 /* RX_ER */ - 0 0 2 0 1 0 /* RX_CLK */ - 2 9 1 0 3 0 /* GTX_CLK - CLK10 */ - 2 8 2 0 1 0>; /* GTX125 - CLK9 */ - }; - - diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/ucc.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/ucc.txt deleted file mode 100644 index e47734bee3f..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/ucc.txt +++ /dev/null @@ -1,70 +0,0 @@ -* UCC (Unified Communications Controllers) - -Required properties: -- device_type : should be "network", "hldc", "uart", "transparent" - "bisync", "atm", or "serial". -- compatible : could be "ucc_geth" or "fsl_atm" and so on. -- cell-index : the ucc number(1-8), corresponding to UCCx in UM. -- reg : Offset and length of the register set for the device -- interrupts : where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. -- interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. -- pio-handle : The phandle for the Parallel I/O port configuration. -- port-number : for UART drivers, the port number to use, between 0 and 3. - This usually corresponds to the /dev/ttyQE device, e.g. <0> = /dev/ttyQE0. - The port number is added to the minor number of the device. Unlike the - CPM UART driver, the port-number is required for the QE UART driver. -- soft-uart : for UART drivers, if specified this means the QE UART device - driver should use "Soft-UART" mode, which is needed on some SOCs that have - broken UART hardware. Soft-UART is provided via a microcode upload. -- rx-clock-name: the UCC receive clock source - "none": clock source is disabled - "brg1" through "brg16": clock source is BRG1-BRG16, respectively - "clk1" through "clk24": clock source is CLK1-CLK24, respectively -- tx-clock-name: the UCC transmit clock source - "none": clock source is disabled - "brg1" through "brg16": clock source is BRG1-BRG16, respectively - "clk1" through "clk24": clock source is CLK1-CLK24, respectively -The following two properties are deprecated. rx-clock has been replaced -with rx-clock-name, and tx-clock has been replaced with tx-clock-name. -Drivers that currently use the deprecated properties should continue to -do so, in order to support older device trees, but they should be updated -to check for the new properties first. -- rx-clock : represents the UCC receive clock source. - 0x00 : clock source is disabled; - 0x1~0x10 : clock source is BRG1~BRG16 respectively; - 0x11~0x28: clock source is QE_CLK1~QE_CLK24 respectively. -- tx-clock: represents the UCC transmit clock source; - 0x00 : clock source is disabled; - 0x1~0x10 : clock source is BRG1~BRG16 respectively; - 0x11~0x28: clock source is QE_CLK1~QE_CLK24 respectively. - -Required properties for network device_type: -- mac-address : list of bytes representing the ethernet address. -- phy-handle : The phandle for the PHY connected to this controller. - -Recommended properties: -- phy-connection-type : a string naming the controller/PHY interface type, - i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id" (Internal - Delay), "rgmii-txid" (delay on TX only), "rgmii-rxid" (delay on RX only), - "tbi", or "rtbi". - -Example: - ucc@2000 { - device_type = "network"; - compatible = "ucc_geth"; - cell-index = <1>; - reg = <2000 200>; - interrupts = ; - interrupt-parent = <700>; - mac-address = [ 00 04 9f 00 23 23 ]; - rx-clock = "none"; - tx-clock = "clk9"; - phy-handle = <212000>; - phy-connection-type = "gmii"; - pio-handle = <140001>; - }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/usb.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/usb.txt deleted file mode 100644 index 9ccd5f30405..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/usb.txt +++ /dev/null @@ -1,37 +0,0 @@ -Freescale QUICC Engine USB Controller - -Required properties: -- compatible : should be "fsl,-qe-usb", "fsl,mpc8323-qe-usb". -- reg : the first two cells should contain usb registers location and - length, the next two two cells should contain PRAM location and - length. -- interrupts : should contain USB interrupt. -- interrupt-parent : interrupt source phandle. -- fsl,fullspeed-clock : specifies the full speed USB clock source: - "none": clock source is disabled - "brg1" through "brg16": clock source is BRG1-BRG16, respectively - "clk1" through "clk24": clock source is CLK1-CLK24, respectively -- fsl,lowspeed-clock : specifies the low speed USB clock source: - "none": clock source is disabled - "brg1" through "brg16": clock source is BRG1-BRG16, respectively - "clk1" through "clk24": clock source is CLK1-CLK24, respectively -- hub-power-budget : USB power budget for the root hub, in mA. -- gpios : should specify GPIOs in this order: USBOE, USBTP, USBTN, USBRP, - USBRN, SPEED (optional), and POWER (optional). - -Example: - -usb@6c0 { - compatible = "fsl,mpc8360-qe-usb", "fsl,mpc8323-qe-usb"; - reg = <0x6c0 0x40 0x8b00 0x100>; - interrupts = <11>; - interrupt-parent = <&qeic>; - fsl,fullspeed-clock = "clk21"; - gpios = <&qe_pio_b 2 0 /* USBOE */ - &qe_pio_b 3 0 /* USBTP */ - &qe_pio_b 8 0 /* USBTN */ - &qe_pio_b 9 0 /* USBRP */ - &qe_pio_b 11 0 /* USBRN */ - &qe_pio_e 20 0 /* SPEED */ - &qe_pio_e 21 0 /* POWER */>; -}; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt deleted file mode 100644 index 2ea76d9d137..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt +++ /dev/null @@ -1,32 +0,0 @@ -* Serial - -Currently defined compatibles: -- fsl,cpm1-smc-uart -- fsl,cpm2-smc-uart -- fsl,cpm1-scc-uart -- fsl,cpm2-scc-uart -- fsl,qe-uart - -Modem control lines connected to GPIO controllers are listed in the gpios -property as described in booting-without-of.txt, section IX.1 in the following -order: - -CTS, RTS, DCD, DSR, DTR, and RI. - -The gpios property is optional and can be left out when control lines are -not used. - -Example: - - serial@11a00 { - device_type = "serial"; - compatible = "fsl,mpc8272-scc-uart", - "fsl,cpm2-scc-uart"; - reg = <11a00 20 8000 100>; - interrupts = <28 8>; - interrupt-parent = <&PIC>; - fsl,cpm-brg = <1>; - fsl,cpm-command = <00800000>; - gpios = <&gpio_c 15 0 - &gpio_d 29 0>; - }; diff --git a/Documentation/powerpc/dts-bindings/fsl/diu.txt b/Documentation/powerpc/dts-bindings/fsl/diu.txt deleted file mode 100644 index b66cb6d31d6..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/diu.txt +++ /dev/null @@ -1,34 +0,0 @@ -* Freescale Display Interface Unit - -The Freescale DIU is a LCD controller, with proper hardware, it can also -drive DVI monitors. - -Required properties: -- compatible : should be "fsl,diu" or "fsl,mpc5121-diu". -- reg : should contain at least address and length of the DIU register - set. -- interrupts : one DIU interrupt should be described here. -- interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. - -Optional properties: -- edid : verbatim EDID data block describing attached display. - Data from the detailed timing descriptor will be used to - program the display controller. - -Example (MPC8610HPCD): - display@2c000 { - compatible = "fsl,diu"; - reg = <0x2c000 100>; - interrupts = <72 2>; - interrupt-parent = <&mpic>; - }; - -Example for MPC5121: - display@2100 { - compatible = "fsl,mpc5121-diu"; - reg = <0x2100 0x100>; - interrupts = <64 0x8>; - interrupt-parent = <&ipic>; - edid = [edid-data]; - }; diff --git a/Documentation/powerpc/dts-bindings/fsl/dma.txt b/Documentation/powerpc/dts-bindings/fsl/dma.txt deleted file mode 100644 index 2a4b4bce611..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/dma.txt +++ /dev/null @@ -1,144 +0,0 @@ -* Freescale 83xx DMA Controller - -Freescale PowerPC 83xx have on chip general purpose DMA controllers. - -Required properties: - -- compatible : compatible list, contains 2 entries, first is - "fsl,CHIP-dma", where CHIP is the processor - (mpc8349, mpc8360, etc.) and the second is - "fsl,elo-dma" -- reg : -- ranges : Should be defined as specified in 1) to describe the - DMA controller channels. -- cell-index : controller index. 0 for controller @ 0x8100 -- interrupts : -- interrupt-parent : optional, if needed for interrupt mapping - - -- DMA channel nodes: - - compatible : compatible list, contains 2 entries, first is - "fsl,CHIP-dma-channel", where CHIP is the processor - (mpc8349, mpc8350, etc.) and the second is - "fsl,elo-dma-channel". However, see note below. - - reg : - - cell-index : dma channel index starts at 0. - -Optional properties: - - interrupts : - (on 83xx this is expected to be identical to - the interrupts property of the parent node) - - interrupt-parent : optional, if needed for interrupt mapping - -Example: - dma@82a8 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8349-dma", "fsl,elo-dma"; - reg = <0x82a8 4>; - ranges = <0 0x8100 0x1a4>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - cell-index = <0>; - reg = <0 0x80>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@80 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - cell-index = <1>; - reg = <0x80 0x80>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@100 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - cell-index = <2>; - reg = <0x100 0x80>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@180 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - cell-index = <3>; - reg = <0x180 0x80>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - }; - -* Freescale 85xx/86xx DMA Controller - -Freescale PowerPC 85xx/86xx have on chip general purpose DMA controllers. - -Required properties: - -- compatible : compatible list, contains 2 entries, first is - "fsl,CHIP-dma", where CHIP is the processor - (mpc8540, mpc8540, etc.) and the second is - "fsl,eloplus-dma" -- reg : -- cell-index : controller index. 0 for controller @ 0x21000, - 1 for controller @ 0xc000 -- ranges : Should be defined as specified in 1) to describe the - DMA controller channels. - -- DMA channel nodes: - - compatible : compatible list, contains 2 entries, first is - "fsl,CHIP-dma-channel", where CHIP is the processor - (mpc8540, mpc8560, etc.) and the second is - "fsl,eloplus-dma-channel". However, see note below. - - cell-index : dma channel index starts at 0. - - reg : - - interrupts : - - interrupt-parent : optional, if needed for interrupt mapping - -Example: - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma"; - reg = <0x21300 4>; - ranges = <0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - -Note on DMA channel compatible properties: The compatible property must say -"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel" to be used by the Elo DMA -driver (fsldma). Any DMA channel used by fsldma cannot be used by another -DMA driver, such as the SSI sound drivers for the MPC8610. Therefore, any DMA -channel that should be used for another driver should not use -"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel". For the SSI drivers, for -example, the compatible property should be "fsl,ssi-dma-channel". See ssi.txt -for more information. diff --git a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt deleted file mode 100644 index 64bcb8be973..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt +++ /dev/null @@ -1,29 +0,0 @@ -* Freescale Enhanced Secure Digital Host Controller (eSDHC) - -The Enhanced Secure Digital Host Controller provides an interface -for MMC, SD, and SDIO types of memory cards. - -Required properties: - - compatible : should be - "fsl,-esdhc", "fsl,esdhc" - - reg : should contain eSDHC registers location and length. - - interrupts : should contain eSDHC interrupt. - - interrupt-parent : interrupt source phandle. - - clock-frequency : specifies eSDHC base clock frequency. - - sdhci,wp-inverted : (optional) specifies that eSDHC controller - reports inverted write-protect state; - - sdhci,1-bit-only : (optional) specifies that a controller can - only handle 1-bit data transfers. - - sdhci,auto-cmd12: (optional) specifies that a controller can - only handle auto CMD12. - -Example: - -sdhci@2e000 { - compatible = "fsl,mpc8378-esdhc", "fsl,esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <42 0x8>; - interrupt-parent = <&ipic>; - /* Filled in by U-Boot */ - clock-frequency = <0>; -}; diff --git a/Documentation/powerpc/dts-bindings/fsl/gtm.txt b/Documentation/powerpc/dts-bindings/fsl/gtm.txt deleted file mode 100644 index 9a33efded4b..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/gtm.txt +++ /dev/null @@ -1,31 +0,0 @@ -* Freescale General-purpose Timers Module - -Required properties: - - compatible : should be - "fsl,-gtm", "fsl,gtm" for SOC GTMs - "fsl,-qe-gtm", "fsl,qe-gtm", "fsl,gtm" for QE GTMs - "fsl,-cpm2-gtm", "fsl,cpm2-gtm", "fsl,gtm" for CPM2 GTMs - - reg : should contain gtm registers location and length (0x40). - - interrupts : should contain four interrupts. - - interrupt-parent : interrupt source phandle. - - clock-frequency : specifies the frequency driving the timer. - -Example: - -timer@500 { - compatible = "fsl,mpc8360-gtm", "fsl,gtm"; - reg = <0x500 0x40>; - interrupts = <90 8 78 8 84 8 72 8>; - interrupt-parent = <&ipic>; - /* filled by u-boot */ - clock-frequency = <0>; -}; - -timer@440 { - compatible = "fsl,mpc8360-qe-gtm", "fsl,qe-gtm", "fsl,gtm"; - reg = <0x440 0x40>; - interrupts = <12 13 14 15>; - interrupt-parent = <&qeic>; - /* filled by u-boot */ - clock-frequency = <0>; -}; diff --git a/Documentation/powerpc/dts-bindings/fsl/guts.txt b/Documentation/powerpc/dts-bindings/fsl/guts.txt deleted file mode 100644 index 9e7a2417dac..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/guts.txt +++ /dev/null @@ -1,25 +0,0 @@ -* Global Utilities Block - -The global utilities block controls power management, I/O device -enabling, power-on-reset configuration monitoring, general-purpose -I/O signal configuration, alternate function selection for multiplexed -signals, and clock control. - -Required properties: - - - compatible : Should define the compatible device type for - global-utilities. - - reg : Offset and length of the register set for the device. - -Recommended properties: - - - fsl,has-rstcr : Indicates that the global utilities register set - contains a functioning "reset control register" (i.e. the board - is wired to reset upon setting the HRESET_REQ bit in this register). - -Example: - global-utilities@e0000 { /* global utilities block */ - compatible = "fsl,mpc8548-guts"; - reg = ; - fsl,has-rstcr; - }; diff --git a/Documentation/powerpc/dts-bindings/fsl/i2c.txt b/Documentation/powerpc/dts-bindings/fsl/i2c.txt deleted file mode 100644 index 1eacd6b20ed..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/i2c.txt +++ /dev/null @@ -1,64 +0,0 @@ -* I2C - -Required properties : - - - reg : Offset and length of the register set for the device - - compatible : should be "fsl,CHIP-i2c" where CHIP is the name of a - compatible processor, e.g. mpc8313, mpc8543, mpc8544, mpc5121, - mpc5200 or mpc5200b. For the mpc5121, an additional node - "fsl,mpc5121-i2c-ctrl" is required as shown in the example below. - -Recommended properties : - - - interrupts : where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. - - interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. - - fsl,preserve-clocking : boolean; if defined, the clock settings - from the bootloader are preserved (not touched). - - clock-frequency : desired I2C bus clock frequency in Hz. - - fsl,timeout : I2C bus timeout in microseconds. - -Examples : - - /* MPC5121 based board */ - i2c@1740 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5121-i2c", "fsl-i2c"; - reg = <0x1740 0x20>; - interrupts = <11 0x8>; - interrupt-parent = <&ipic>; - clock-frequency = <100000>; - }; - - i2ccontrol@1760 { - compatible = "fsl,mpc5121-i2c-ctrl"; - reg = <0x1760 0x8>; - }; - - /* MPC5200B based board */ - i2c@3d00 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - reg = <0x3d00 0x40>; - interrupts = <2 15 0>; - interrupt-parent = <&mpc5200_pic>; - fsl,preserve-clocking; - }; - - /* MPC8544 base board */ - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc8544-i2c", "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - clock-frequency = <400000>; - fsl,timeout = <10000>; - }; diff --git a/Documentation/powerpc/dts-bindings/fsl/lbc.txt b/Documentation/powerpc/dts-bindings/fsl/lbc.txt deleted file mode 100644 index 3300fec501c..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/lbc.txt +++ /dev/null @@ -1,35 +0,0 @@ -* Chipselect/Local Bus - -Properties: -- name : Should be localbus -- #address-cells : Should be either two or three. The first cell is the - chipselect number, and the remaining cells are the - offset into the chipselect. -- #size-cells : Either one or two, depending on how large each chipselect - can be. -- ranges : Each range corresponds to a single chipselect, and cover - the entire access window as configured. - -Example: - localbus@f0010100 { - compatible = "fsl,mpc8272-localbus", - "fsl,pq2-localbus"; - #address-cells = <2>; - #size-cells = <1>; - reg = ; - - ranges = <0 0 fe000000 02000000 - 1 0 f4500000 00008000>; - - flash@0,0 { - compatible = "jedec-flash"; - reg = <0 0 2000000>; - bank-width = <4>; - device-width = <1>; - }; - - board-control@1,0 { - reg = <1 0 20>; - compatible = "fsl,mpc8272ads-bcsr"; - }; - }; diff --git a/Documentation/powerpc/dts-bindings/fsl/mcm.txt b/Documentation/powerpc/dts-bindings/fsl/mcm.txt deleted file mode 100644 index 4ceda9b3b41..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/mcm.txt +++ /dev/null @@ -1,64 +0,0 @@ -===================================================================== -MPX LAW & Coherency Module Device Tree Binding -Copyright (C) 2009 Freescale Semiconductor Inc. -===================================================================== - -Local Access Window (LAW) Node - -The LAW node represents the region of CCSR space where local access -windows are configured. For MCM based devices this is the first 4k -of CCSR space that includes CCSRBAR, ALTCBAR, ALTCAR, BPTR, and some -number of local access windows as specified by fsl,num-laws. - -PROPERTIES - - - compatible - Usage: required - Value type: - Definition: Must include "fsl,mcm-law" - - - reg - Usage: required - Value type: - Definition: A standard property. The value specifies the - physical address offset and length of the CCSR space - registers. - - - fsl,num-laws - Usage: required - Value type: - Definition: The value specifies the number of local access - windows for this device. - -===================================================================== - -MPX Coherency Module Node - -The MPX LAW node represents the region of CCSR space where MCM config -and error reporting registers exist, this is the second 4k (0x1000) -of CCSR space. - -PROPERTIES - - - compatible - Usage: required - Value type: - Definition: Must include "fsl,CHIP-mcm", "fsl,mcm" where - CHIP is the processor (mpc8641, mpc8610, etc.) - - - reg - Usage: required - Value type: - Definition: A standard property. The value specifies the - physical address offset and length of the CCSR space - registers. - - - interrupts - Usage: required - Value type: - - - interrupt-parent - Usage: required - Value type: - -===================================================================== diff --git a/Documentation/powerpc/dts-bindings/fsl/mcu-mpc8349emitx.txt b/Documentation/powerpc/dts-bindings/fsl/mcu-mpc8349emitx.txt deleted file mode 100644 index 0f766333b6e..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/mcu-mpc8349emitx.txt +++ /dev/null @@ -1,17 +0,0 @@ -Freescale MPC8349E-mITX-compatible Power Management Micro Controller Unit (MCU) - -Required properties: -- compatible : "fsl,-", "fsl,mcu-mpc8349emitx". -- reg : should specify I2C address (0x0a). -- #gpio-cells : should be 2. -- gpio-controller : should be present. - -Example: - -mcu@0a { - #gpio-cells = <2>; - compatible = "fsl,mc9s08qg8-mpc8349emitx", - "fsl,mcu-mpc8349emitx"; - reg = <0x0a>; - gpio-controller; -}; diff --git a/Documentation/powerpc/dts-bindings/fsl/mpc5121-psc.txt b/Documentation/powerpc/dts-bindings/fsl/mpc5121-psc.txt deleted file mode 100644 index 8832e879891..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/mpc5121-psc.txt +++ /dev/null @@ -1,70 +0,0 @@ -MPC5121 PSC Device Tree Bindings - -PSC in UART mode ----------------- - -For PSC in UART mode the needed PSC serial devices -are specified by fsl,mpc5121-psc-uart nodes in the -fsl,mpc5121-immr SoC node. Additionally the PSC FIFO -Controller node fsl,mpc5121-psc-fifo is requered there: - -fsl,mpc5121-psc-uart nodes --------------------------- - -Required properties : - - compatible : Should contain "fsl,mpc5121-psc-uart" and "fsl,mpc5121-psc" - - cell-index : Index of the PSC in hardware - - reg : Offset and length of the register set for the PSC device - - interrupts : where a is the interrupt number of the - PSC FIFO Controller and b is a field that represents an - encoding of the sense and level information for the interrupt. - - interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. - -Recommended properties : - - fsl,rx-fifo-size : the size of the RX fifo slice (a multiple of 4) - - fsl,tx-fifo-size : the size of the TX fifo slice (a multiple of 4) - - -fsl,mpc5121-psc-fifo node -------------------------- - -Required properties : - - compatible : Should be "fsl,mpc5121-psc-fifo" - - reg : Offset and length of the register set for the PSC - FIFO Controller - - interrupts : where a is the interrupt number of the - PSC FIFO Controller and b is a field that represents an - encoding of the sense and level information for the interrupt. - - interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. - - -Example for a board using PSC0 and PSC1 devices in serial mode: - -serial@11000 { - compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; - cell-index = <0>; - reg = <0x11000 0x100>; - interrupts = <40 0x8>; - interrupt-parent = < &ipic >; - fsl,rx-fifo-size = <16>; - fsl,tx-fifo-size = <16>; -}; - -serial@11100 { - compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; - cell-index = <1>; - reg = <0x11100 0x100>; - interrupts = <40 0x8>; - interrupt-parent = < &ipic >; - fsl,rx-fifo-size = <16>; - fsl,tx-fifo-size = <16>; -}; - -pscfifo@11f00 { - compatible = "fsl,mpc5121-psc-fifo"; - reg = <0x11f00 0x100>; - interrupts = <40 0x8>; - interrupt-parent = < &ipic >; -}; diff --git a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt deleted file mode 100644 index 4ccb2cd5df9..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt +++ /dev/null @@ -1,198 +0,0 @@ -MPC5200 Device Tree Bindings ----------------------------- - -(c) 2006-2009 Secret Lab Technologies Ltd -Grant Likely - -Naming conventions ------------------- -For mpc5200 on-chip devices, the format for each compatible value is --[-]. The OS should be able to match a device driver -to the device based solely on the compatible value. If two drivers -match on the compatible list; the 'most compatible' driver should be -selected. - -The split between the MPC5200 and the MPC5200B leaves a bit of a -conundrum. How should the compatible property be set up to provide -maximum compatibility information; but still accurately describe the -chip? For the MPC5200; the answer is easy. Most of the SoC devices -originally appeared on the MPC5200. Since they didn't exist anywhere -else; the 5200 compatible properties will contain only one item; -"fsl,mpc5200-". - -The 5200B is almost the same as the 5200, but not quite. It fixes -silicon bugs and it adds a small number of enhancements. Most of the -devices either provide exactly the same interface as on the 5200. A few -devices have extra functions but still have a backwards compatible mode. -To express this information as completely as possible, 5200B device trees -should have two items in the compatible list: - compatible = "fsl,mpc5200b-","fsl,mpc5200-"; - -It is *strongly* recommended that 5200B device trees follow this convention -(instead of only listing the base mpc5200 item). - -ie. ethernet on mpc5200: compatible = "fsl,mpc5200-fec"; - ethernet on mpc5200b: compatible = "fsl,mpc5200b-fec", "fsl,mpc5200-fec"; - -Modal devices, like PSCs, also append the configured function to the -end of the compatible field. ie. A PSC in i2s mode would specify -"fsl,mpc5200-psc-i2s", not "fsl,mpc5200-i2s". This convention is chosen to -avoid naming conflicts with non-psc devices providing the same -function. For example, "fsl,mpc5200-spi" and "fsl,mpc5200-psc-spi" describe -the mpc5200 simple spi device and a PSC spi mode respectively. - -At the time of writing, exact chip may be either 'fsl,mpc5200' or -'fsl,mpc5200b'. - -The soc node ------------- -This node describes the on chip SOC peripherals. Every mpc5200 based -board will have this node, and as such there is a common naming -convention for SOC devices. - -Required properties: -name description ----- ----------- -ranges Memory range of the internal memory mapped registers. - Should be <0 [baseaddr] 0xc000> -reg Should be <[baseaddr] 0x100> -compatible mpc5200: "fsl,mpc5200-immr" - mpc5200b: "fsl,mpc5200b-immr" -system-frequency 'fsystem' frequency in Hz; XLB, IPB, USB and PCI - clocks are derived from the fsystem clock. -bus-frequency IPB bus frequency in Hz. Clock rate - used by most of the soc devices. - -soc child nodes ---------------- -Any on chip SOC devices available to Linux must appear as soc5200 child nodes. - -Note: The tables below show the value for the mpc5200. A mpc5200b device -tree should use the "fsl,mpc5200b-","fsl,mpc5200-" form. - -Required soc5200 child nodes: -name compatible Description ----- ---------- ----------- -cdm@ fsl,mpc5200-cdm Clock Distribution -interrupt-controller@ fsl,mpc5200-pic need an interrupt - controller to boot -bestcomm@ fsl,mpc5200-bestcomm Bestcomm DMA controller - -Recommended soc5200 child nodes; populate as needed for your board -name compatible Description ----- ---------- ----------- -timer@ fsl,mpc5200-gpt General purpose timers -gpio@ fsl,mpc5200-gpio MPC5200 simple gpio controller -gpio@ fsl,mpc5200-gpio-wkup MPC5200 wakeup gpio controller -rtc@ fsl,mpc5200-rtc Real time clock -mscan@ fsl,mpc5200-mscan CAN bus controller -pci@ fsl,mpc5200-pci PCI bridge -serial@ fsl,mpc5200-psc-uart PSC in serial mode -i2s@ fsl,mpc5200-psc-i2s PSC in i2s mode -ac97@ fsl,mpc5200-psc-ac97 PSC in ac97 mode -spi@ fsl,mpc5200-psc-spi PSC in spi mode -irda@ fsl,mpc5200-psc-irda PSC in IrDA mode -spi@ fsl,mpc5200-spi MPC5200 spi device -ethernet@ fsl,mpc5200-fec MPC5200 ethernet device -ata@ fsl,mpc5200-ata IDE ATA interface -i2c@ fsl,mpc5200-i2c I2C controller -usb@ fsl,mpc5200-ohci,ohci-be USB controller -xlb@ fsl,mpc5200-xlb XLB arbitrator - -fsl,mpc5200-gpt nodes ---------------------- -On the mpc5200 and 5200b, GPT0 has a watchdog timer function. If the board -design supports the internal wdt, then the device node for GPT0 should -include the empty property 'fsl,has-wdt'. Note that this does not activate -the watchdog. The timer will function as a GPT if the timer api is used, and -it will function as watchdog if the watchdog device is used. The watchdog -mode has priority over the gpt mode, i.e. if the watchdog is activated, any -gpt api call to this timer will fail with -EBUSY. - -If you add the property - fsl,wdt-on-boot = ; -GPT0 will be marked as in-use watchdog, i.e. blocking every gpt access to it. -If n>0, the watchdog is started with a timeout of n seconds. If n=0, the -configuration of the watchdog is not touched. This is useful in two cases: -- just mark GPT0 as watchdog, blocking gpt accesses, and configure it later; -- do not touch a configuration assigned by the boot loader which supervises - the boot process itself. - -The watchdog will respect the CONFIG_WATCHDOG_NOWAYOUT option. - -An mpc5200-gpt can be used as a single line GPIO controller. To do so, -add the following properties to the gpt node: - gpio-controller; - #gpio-cells = <2>; -When referencing the GPIO line from another node, the first cell must always -be zero and the second cell represents the gpio flags and described in the -gpio device tree binding. - -An mpc5200-gpt can be used as a single line edge sensitive interrupt -controller. To do so, add the following properties to the gpt node: - interrupt-controller; - #interrupt-cells = <1>; -When referencing the IRQ line from another node, the cell represents the -sense mode; 1 for edge rising, 2 for edge falling. - -fsl,mpc5200-psc nodes ---------------------- -The PSCs should include a cell-index which is the index of the PSC in -hardware. cell-index is used to determine which shared SoC registers to -use when setting up PSC clocking. cell-index number starts at '0'. ie: - PSC1 has 'cell-index = <0>' - PSC4 has 'cell-index = <3>' - -PSC in i2s mode: The mpc5200 and mpc5200b PSCs are not compatible when in -i2s mode. An 'mpc5200b-psc-i2s' node cannot include 'mpc5200-psc-i2s' in the -compatible field. - - -fsl,mpc5200-gpio and fsl,mpc5200-gpio-wkup nodes ------------------------------------------------- -Each GPIO controller node should have the empty property gpio-controller and -#gpio-cells set to 2. First cell is the GPIO number which is interpreted -according to the bit numbers in the GPIO control registers. The second cell -is for flags which is currently unused. - -fsl,mpc5200-fec nodes ---------------------- -The FEC node can specify one of the following properties to configure -the MII link: -- fsl,7-wire-mode - An empty property that specifies the link uses 7-wire - mode instead of MII -- current-speed - Specifies that the MII should be configured for a fixed - speed. This property should contain two cells. The - first cell specifies the speed in Mbps and the second - should be '0' for half duplex and '1' for full duplex -- phy-handle - Contains a phandle to an Ethernet PHY. - -Interrupt controller (fsl,mpc5200-pic) node -------------------------------------------- -The mpc5200 pic binding splits hardware IRQ numbers into two levels. The -split reflects the layout of the PIC hardware itself, which groups -interrupts into one of three groups; CRIT, MAIN or PERP. Also, the -Bestcomm dma engine has it's own set of interrupt sources which are -cascaded off of peripheral interrupt 0, which the driver interprets as a -fourth group, SDMA. - -The interrupts property for device nodes using the mpc5200 pic consists -of three cells; - - L1 := [CRIT=0, MAIN=1, PERP=2, SDMA=3] - L2 := interrupt number; directly mapped from the value in the - "ICTL PerStat, MainStat, CritStat Encoded Register" - level := [LEVEL_HIGH=0, EDGE_RISING=1, EDGE_FALLING=2, LEVEL_LOW=3] - -For external IRQs, use the following interrupt property values (how to -specify external interrupts is a frequently asked question): -External interrupts: - external irq0: interrupts = <0 0 n>; - external irq1: interrupts = <1 1 n>; - external irq2: interrupts = <1 2 n>; - external irq3: interrupts = <1 3 n>; -'n' is sense (0: level high, 1: edge rising, 2: edge falling 3: level low) - -fsl,mpc5200-mscan nodes ------------------------ -See file can.txt in this directory. diff --git a/Documentation/powerpc/dts-bindings/fsl/mpic.txt b/Documentation/powerpc/dts-bindings/fsl/mpic.txt deleted file mode 100644 index 71e39cf3215..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/mpic.txt +++ /dev/null @@ -1,42 +0,0 @@ -* OpenPIC and its interrupt numbers on Freescale's e500/e600 cores - -The OpenPIC specification does not specify which interrupt source has to -become which interrupt number. This is up to the software implementation -of the interrupt controller. The only requirement is that every -interrupt source has to have an unique interrupt number / vector number. -To accomplish this the current implementation assigns the number zero to -the first source, the number one to the second source and so on until -all interrupt sources have their unique number. -Usually the assigned vector number equals the interrupt number mentioned -in the documentation for a given core / CPU. This is however not true -for the e500 cores (MPC85XX CPUs) where the documentation distinguishes -between internal and external interrupt sources and starts counting at -zero for both of them. - -So what to write for external interrupt source X or internal interrupt -source Y into the device tree? Here is an example: - -The memory map for the interrupt controller in the MPC8544[0] shows, -that the first interrupt source starts at 0x5_0000 (PIC Register Address -Map-Interrupt Source Configuration Registers). This source becomes the -number zero therefore: - External interrupt 0 = interrupt number 0 - External interrupt 1 = interrupt number 1 - External interrupt 2 = interrupt number 2 - ... -Every interrupt number allocates 0x20 bytes register space. So to get -its number it is sufficient to shift the lower 16bits to right by five. -So for the external interrupt 10 we have: - 0x0140 >> 5 = 10 - -After the external sources, the internal sources follow. The in core I2C -controller on the MPC8544 for instance has the internal source number -27. Oo obtain its interrupt number we take the lower 16bits of its memory -address (0x5_0560) and shift it right: - 0x0560 >> 5 = 43 - -Therefore the I2C device node for the MPC8544 CPU has to have the -interrupt number 43 specified in the device tree. - -[0] MPC8544E PowerQUICCTM III, Integrated Host Processor Family Reference Manual - MPC8544ERM Rev. 1 10/2007 diff --git a/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt b/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt deleted file mode 100644 index bcc30bac683..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt +++ /dev/null @@ -1,36 +0,0 @@ -* Freescale MSI interrupt controller - -Required properties: -- compatible : compatible list, contains 2 entries, - first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572, - etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on - the parent type. -- reg : should contain the address and the length of the shared message - interrupt register set. -- msi-available-ranges: use style section to define which - msi interrupt can be used in the 256 msi interrupts. This property is - optional, without this, all the 256 MSI interrupts can be used. -- interrupts : each one of the interrupts here is one entry per 32 MSIs, - and routed to the host interrupt controller. the interrupts should - be set as edge sensitive. -- interrupt-parent: the phandle for the interrupt controller - that services interrupts for this device. for 83xx cpu, the interrupts - are routed to IPIC, and for 85xx/86xx cpu the interrupts are routed - to MPIC. - -Example: - msi@41600 { - compatible = "fsl,mpc8610-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; diff --git a/Documentation/powerpc/dts-bindings/fsl/pmc.txt b/Documentation/powerpc/dts-bindings/fsl/pmc.txt deleted file mode 100644 index 07256b7ffca..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/pmc.txt +++ /dev/null @@ -1,63 +0,0 @@ -* Power Management Controller - -Properties: -- compatible: "fsl,-pmc". - - "fsl,mpc8349-pmc" should be listed for any chip whose PMC is - compatible. "fsl,mpc8313-pmc" should also be listed for any chip - whose PMC is compatible, and implies deep-sleep capability. - - "fsl,mpc8548-pmc" should be listed for any chip whose PMC is - compatible. "fsl,mpc8536-pmc" should also be listed for any chip - whose PMC is compatible, and implies deep-sleep capability. - - "fsl,mpc8641d-pmc" should be listed for any chip whose PMC is - compatible; all statements below that apply to "fsl,mpc8548-pmc" also - apply to "fsl,mpc8641d-pmc". - - Compatibility does not include bit assignments in SCCR/PMCDR/DEVDISR; these - bit assignments are indicated via the sleep specifier in each device's - sleep property. - -- reg: For devices compatible with "fsl,mpc8349-pmc", the first resource - is the PMC block, and the second resource is the Clock Configuration - block. - - For devices compatible with "fsl,mpc8548-pmc", the first resource - is a 32-byte block beginning with DEVDISR. - -- interrupts: For "fsl,mpc8349-pmc"-compatible devices, the first - resource is the PMC block interrupt. - -- fsl,mpc8313-wakeup-timer: For "fsl,mpc8313-pmc"-compatible devices, - this is a phandle to an "fsl,gtm" node on which timer 4 can be used as - a wakeup source from deep sleep. - -Sleep specifiers: - - fsl,mpc8349-pmc: Sleep specifiers consist of one cell. For each bit - that is set in the cell, the corresponding bit in SCCR will be saved - and cleared on suspend, and restored on resume. This sleep controller - supports disabling and resuming devices at any time. - - fsl,mpc8536-pmc: Sleep specifiers consist of three cells, the third of - which will be ORed into PMCDR upon suspend, and cleared from PMCDR - upon resume. The first two cells are as described for fsl,mpc8578-pmc. - This sleep controller only supports disabling devices during system - sleep, or permanently. - - fsl,mpc8548-pmc: Sleep specifiers consist of one or two cells, the - first of which will be ORed into DEVDISR (and the second into - DEVDISR2, if present -- this cell should be zero or absent if the - hardware does not have DEVDISR2) upon a request for permanent device - disabling. This sleep controller does not support configuring devices - to disable during system sleep (unless supported by another compatible - match), or dynamically. - -Example: - - power@b00 { - compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc"; - reg = <0xb00 0x100 0xa00 0x100>; - interrupts = <80 8>; - }; diff --git a/Documentation/powerpc/dts-bindings/fsl/sata.txt b/Documentation/powerpc/dts-bindings/fsl/sata.txt deleted file mode 100644 index b46bcf46c3d..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/sata.txt +++ /dev/null @@ -1,29 +0,0 @@ -* Freescale 8xxx/3.0 Gb/s SATA nodes - -SATA nodes are defined to describe on-chip Serial ATA controllers. -Each SATA port should have its own node. - -Required properties: -- compatible : compatible list, contains 2 entries, first is - "fsl,CHIP-sata", where CHIP is the processor - (mpc8315, mpc8379, etc.) and the second is - "fsl,pq-sata" -- interrupts : -- cell-index : controller index. - 1 for controller @ 0x18000 - 2 for controller @ 0x19000 - 3 for controller @ 0x1a000 - 4 for controller @ 0x1b000 - -Optional properties: -- interrupt-parent : optional, if needed for interrupt mapping -- reg : - -Example: - sata@18000 { - compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; - reg = <0x18000 0x1000>; - cell-index = <1>; - interrupts = <2c 8>; - interrupt-parent = < &ipic >; - }; diff --git a/Documentation/powerpc/dts-bindings/fsl/sec.txt b/Documentation/powerpc/dts-bindings/fsl/sec.txt deleted file mode 100644 index 2b6f2d45c45..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/sec.txt +++ /dev/null @@ -1,68 +0,0 @@ -Freescale SoC SEC Security Engines - -Required properties: - -- compatible : Should contain entries for this and backward compatible - SEC versions, high to low, e.g., "fsl,sec2.1", "fsl,sec2.0" -- reg : Offset and length of the register set for the device -- interrupts : the SEC's interrupt number -- fsl,num-channels : An integer representing the number of channels - available. -- fsl,channel-fifo-len : An integer representing the number of - descriptor pointers each channel fetch fifo can hold. -- fsl,exec-units-mask : The bitmask representing what execution units - (EUs) are available. It's a single 32-bit cell. EU information - should be encoded following the SEC's Descriptor Header Dword - EU_SEL0 field documentation, i.e. as follows: - - bit 0 = reserved - should be 0 - bit 1 = set if SEC has the ARC4 EU (AFEU) - bit 2 = set if SEC has the DES/3DES EU (DEU) - bit 3 = set if SEC has the message digest EU (MDEU/MDEU-A) - bit 4 = set if SEC has the random number generator EU (RNG) - bit 5 = set if SEC has the public key EU (PKEU) - bit 6 = set if SEC has the AES EU (AESU) - bit 7 = set if SEC has the Kasumi EU (KEU) - bit 8 = set if SEC has the CRC EU (CRCU) - bit 11 = set if SEC has the message digest EU extended alg set (MDEU-B) - -remaining bits are reserved for future SEC EUs. - -- fsl,descriptor-types-mask : The bitmask representing what descriptors - are available. It's a single 32-bit cell. Descriptor type information - should be encoded following the SEC's Descriptor Header Dword DESC_TYPE - field documentation, i.e. as follows: - - bit 0 = set if SEC supports the aesu_ctr_nonsnoop desc. type - bit 1 = set if SEC supports the ipsec_esp descriptor type - bit 2 = set if SEC supports the common_nonsnoop desc. type - bit 3 = set if SEC supports the 802.11i AES ccmp desc. type - bit 4 = set if SEC supports the hmac_snoop_no_afeu desc. type - bit 5 = set if SEC supports the srtp descriptor type - bit 6 = set if SEC supports the non_hmac_snoop_no_afeu desc.type - bit 7 = set if SEC supports the pkeu_assemble descriptor type - bit 8 = set if SEC supports the aesu_key_expand_output desc.type - bit 9 = set if SEC supports the pkeu_ptmul descriptor type - bit 10 = set if SEC supports the common_nonsnoop_afeu desc. type - bit 11 = set if SEC supports the pkeu_ptadd_dbl descriptor type - - ..and so on and so forth. - -Optional properties: - -- interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. - -Example: - - /* MPC8548E */ - crypto@30000 { - compatible = "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <29 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0xfe>; - fsl,descriptor-types-mask = <0x12b0ebf>; - }; diff --git a/Documentation/powerpc/dts-bindings/fsl/spi.txt b/Documentation/powerpc/dts-bindings/fsl/spi.txt deleted file mode 100644 index 777abd7399d..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/spi.txt +++ /dev/null @@ -1,53 +0,0 @@ -* SPI (Serial Peripheral Interface) - -Required properties: -- cell-index : QE SPI subblock index. - 0: QE subblock SPI1 - 1: QE subblock SPI2 -- compatible : should be "fsl,spi". -- mode : the SPI operation mode, it can be "cpu" or "cpu-qe". -- reg : Offset and length of the register set for the device -- interrupts : where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. -- interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. - -Optional properties: -- gpios : specifies the gpio pins to be used for chipselects. - The gpios will be referred to as reg = in the SPI child nodes. - If unspecified, a single SPI device without a chip select can be used. - -Example: - spi@4c0 { - cell-index = <0>; - compatible = "fsl,spi"; - reg = <4c0 40>; - interrupts = <82 0>; - interrupt-parent = <700>; - mode = "cpu"; - gpios = <&gpio 18 1 // device reg=<0> - &gpio 19 1>; // device reg=<1> - }; - - -* eSPI (Enhanced Serial Peripheral Interface) - -Required properties: -- compatible : should be "fsl,mpc8536-espi". -- reg : Offset and length of the register set for the device. -- interrupts : should contain eSPI interrupt, the device has one interrupt. -- fsl,espi-num-chipselects : the number of the chipselect signals. - -Example: - spi@110000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc8536-espi"; - reg = <0x110000 0x1000>; - interrupts = <53 0x2>; - interrupt-parent = <&mpic>; - fsl,espi-num-chipselects = <4>; - }; diff --git a/Documentation/powerpc/dts-bindings/fsl/ssi.txt b/Documentation/powerpc/dts-bindings/fsl/ssi.txt deleted file mode 100644 index 5ff76c9c57d..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/ssi.txt +++ /dev/null @@ -1,73 +0,0 @@ -Freescale Synchronous Serial Interface - -The SSI is a serial device that communicates with audio codecs. It can -be programmed in AC97, I2S, left-justified, or right-justified modes. - -Required properties: -- compatible: Compatible list, contains "fsl,ssi". -- cell-index: The SSI, <0> = SSI1, <1> = SSI2, and so on. -- reg: Offset and length of the register set for the device. -- interrupts: where a is the interrupt number and b is a - field that represents an encoding of the sense and - level information for the interrupt. This should be - encoded based on the information in section 2) - depending on the type of interrupt controller you - have. -- interrupt-parent: The phandle for the interrupt controller that - services interrupts for this device. -- fsl,mode: The operating mode for the SSI interface. - "i2s-slave" - I2S mode, SSI is clock slave - "i2s-master" - I2S mode, SSI is clock master - "lj-slave" - left-justified mode, SSI is clock slave - "lj-master" - l.j. mode, SSI is clock master - "rj-slave" - right-justified mode, SSI is clock slave - "rj-master" - r.j., SSI is clock master - "ac97-slave" - AC97 mode, SSI is clock slave - "ac97-master" - AC97 mode, SSI is clock master -- fsl,playback-dma: Phandle to a node for the DMA channel to use for - playback of audio. This is typically dictated by SOC - design. See the notes below. -- fsl,capture-dma: Phandle to a node for the DMA channel to use for - capture (recording) of audio. This is typically dictated - by SOC design. See the notes below. -- fsl,fifo-depth: The number of elements in the transmit and receive FIFOs. - This number is the maximum allowed value for SFCSR[TFWM0]. -- fsl,ssi-asynchronous: - If specified, the SSI is to be programmed in asynchronous - mode. In this mode, pins SRCK, STCK, SRFS, and STFS must - all be connected to valid signals. In synchronous mode, - SRCK and SRFS are ignored. Asynchronous mode allows - playback and capture to use different sample sizes and - sample rates. Some drivers may require that SRCK and STCK - be connected together, and SRFS and STFS be connected - together. This would still allow different sample sizes, - but not different sample rates. - -Optional properties: -- codec-handle: Phandle to a 'codec' node that defines an audio - codec connected to this SSI. This node is typically - a child of an I2C or other control node. - -Child 'codec' node required properties: -- compatible: Compatible list, contains the name of the codec - -Child 'codec' node optional properties: -- clock-frequency: The frequency of the input clock, which typically comes - from an on-board dedicated oscillator. - -Notes on fsl,playback-dma and fsl,capture-dma: - -On SOCs that have an SSI, specific DMA channels are hard-wired for playback -and capture. On the MPC8610, for example, SSI1 must use DMA channel 0 for -playback and DMA channel 1 for capture. SSI2 must use DMA channel 2 for -playback and DMA channel 3 for capture. The developer can choose which -DMA controller to use, but the channels themselves are hard-wired. The -purpose of these two properties is to represent this hardware design. - -The device tree nodes for the DMA channels that are referenced by -"fsl,playback-dma" and "fsl,capture-dma" must be marked as compatible with -"fsl,ssi-dma-channel". The SOC-specific compatible string (e.g. -"fsl,mpc8610-dma-channel") can remain. If these nodes are left as -"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel", then the generic Elo DMA -drivers (fsldma) will attempt to use them, and it will conflict with the -sound drivers. diff --git a/Documentation/powerpc/dts-bindings/fsl/tsec.txt b/Documentation/powerpc/dts-bindings/fsl/tsec.txt deleted file mode 100644 index edb7ae19e86..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/tsec.txt +++ /dev/null @@ -1,76 +0,0 @@ -* MDIO IO device - -The MDIO is a bus to which the PHY devices are connected. For each -device that exists on this bus, a child node should be created. See -the definition of the PHY node in booting-without-of.txt for an example -of how to define a PHY. - -Required properties: - - reg : Offset and length of the register set for the device - - compatible : Should define the compatible device type for the - mdio. Currently, this is most likely to be "fsl,gianfar-mdio" - -Example: - - mdio@24520 { - reg = <24520 20>; - compatible = "fsl,gianfar-mdio"; - - ethernet-phy@0 { - ...... - }; - }; - -* TBI Internal MDIO bus - -As of this writing, every tsec is associated with an internal TBI PHY. -This PHY is accessed through the local MDIO bus. These buses are defined -similarly to the mdio buses, except they are compatible with "fsl,gianfar-tbi". -The TBI PHYs underneath them are similar to normal PHYs, but the reg property -is considered instructive, rather than descriptive. The reg property should -be chosen so it doesn't interfere with other PHYs on the bus. - -* Gianfar-compatible ethernet nodes - -Properties: - - - device_type : Should be "network" - - model : Model of the device. Can be "TSEC", "eTSEC", or "FEC" - - compatible : Should be "gianfar" - - reg : Offset and length of the register set for the device - - local-mac-address : List of bytes representing the ethernet address of - this controller - - interrupts : For FEC devices, the first interrupt is the device's - interrupt. For TSEC and eTSEC devices, the first interrupt is - transmit, the second is receive, and the third is error. - - phy-handle : The phandle for the PHY connected to this ethernet - controller. - - fixed-link : where a is emulated phy id - choose any, - but unique to the all specified fixed-links, b is duplex - 0 half, - 1 full, c is link speed - d#10/d#100/d#1000, d is pause - 0 no - pause, 1 pause, e is asym_pause - 0 no asym_pause, 1 asym_pause. - - phy-connection-type : a string naming the controller/PHY interface type, - i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id", "sgmii", - "tbi", or "rtbi". This property is only really needed if the connection - is of type "rgmii-id", as all other connection types are detected by - hardware. - - fsl,magic-packet : If present, indicates that the hardware supports - waking up via magic packet. - - bd-stash : If present, indicates that the hardware supports stashing - buffer descriptors in the L2. - - rx-stash-len : Denotes the number of bytes of a received buffer to stash - in the L2. - - rx-stash-idx : Denotes the index of the first byte from the received - buffer to stash in the L2. - -Example: - ethernet@24000 { - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - local-mac-address = [ 00 E0 0C 00 73 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; - phy-handle = <&phy0> - }; diff --git a/Documentation/powerpc/dts-bindings/fsl/upm-nand.txt b/Documentation/powerpc/dts-bindings/fsl/upm-nand.txt deleted file mode 100644 index a48b2cadc7f..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/upm-nand.txt +++ /dev/null @@ -1,63 +0,0 @@ -Freescale Localbus UPM programmed to work with NAND flash - -Required properties: -- compatible : "fsl,upm-nand". -- reg : should specify localbus chip select and size used for the chip. -- fsl,upm-addr-offset : UPM pattern offset for the address latch. -- fsl,upm-cmd-offset : UPM pattern offset for the command latch. - -Optional properties: -- fsl,upm-wait-flags : add chip-dependent short delays after running the - UPM pattern (0x1), after writing a data byte (0x2) or after - writing out a buffer (0x4). -- fsl,upm-addr-line-cs-offsets : address offsets for multi-chip support. - The corresponding address lines are used to select the chip. -- gpios : may specify optional GPIOs connected to the Ready-Not-Busy pins - (R/B#). For multi-chip devices, "n" GPIO definitions are required - according to the number of chips. -- chip-delay : chip dependent delay for transfering data from array to - read registers (tR). Required if property "gpios" is not used - (R/B# pins not connected). - -Examples: - -upm@1,0 { - compatible = "fsl,upm-nand"; - reg = <1 0 1>; - fsl,upm-addr-offset = <16>; - fsl,upm-cmd-offset = <8>; - gpios = <&qe_pio_e 18 0>; - - flash { - #address-cells = <1>; - #size-cells = <1>; - compatible = "..."; - - partition@0 { - ... - }; - }; -}; - -upm@3,0 { - #address-cells = <0>; - #size-cells = <0>; - compatible = "tqc,tqm8548-upm-nand", "fsl,upm-nand"; - reg = <3 0x0 0x800>; - fsl,upm-addr-offset = <0x10>; - fsl,upm-cmd-offset = <0x08>; - /* Multi-chip NAND device */ - fsl,upm-addr-line-cs-offsets = <0x0 0x200>; - fsl,upm-wait-flags = <0x5>; - chip-delay = <25>; // in micro-seconds - - nand@0 { - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "fs"; - reg = <0x00000000 0x10000000>; - }; - }; -}; diff --git a/Documentation/powerpc/dts-bindings/fsl/usb.txt b/Documentation/powerpc/dts-bindings/fsl/usb.txt deleted file mode 100644 index bd5723f0b67..00000000000 --- a/Documentation/powerpc/dts-bindings/fsl/usb.txt +++ /dev/null @@ -1,81 +0,0 @@ -Freescale SOC USB controllers - -The device node for a USB controller that is part of a Freescale -SOC is as described in the document "Open Firmware Recommended -Practice : Universal Serial Bus" with the following modifications -and additions : - -Required properties : - - compatible : Should be "fsl-usb2-mph" for multi port host USB - controllers, or "fsl-usb2-dr" for dual role USB controllers - or "fsl,mpc5121-usb2-dr" for dual role USB controllers of MPC5121 - - phy_type : For multi port host USB controllers, should be one of - "ulpi", or "serial". For dual role USB controllers, should be - one of "ulpi", "utmi", "utmi_wide", or "serial". - - reg : Offset and length of the register set for the device - - port0 : boolean; if defined, indicates port0 is connected for - fsl-usb2-mph compatible controllers. Either this property or - "port1" (or both) must be defined for "fsl-usb2-mph" compatible - controllers. - - port1 : boolean; if defined, indicates port1 is connected for - fsl-usb2-mph compatible controllers. Either this property or - "port0" (or both) must be defined for "fsl-usb2-mph" compatible - controllers. - - dr_mode : indicates the working mode for "fsl-usb2-dr" compatible - controllers. Can be "host", "peripheral", or "otg". Default to - "host" if not defined for backward compatibility. - -Recommended properties : - - interrupts : where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. - - interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. - -Optional properties : - - fsl,invert-drvvbus : boolean; for MPC5121 USB0 only. Indicates the - port power polarity of internal PHY signal DRVVBUS is inverted. - - fsl,invert-pwr-fault : boolean; for MPC5121 USB0 only. Indicates - the PWR_FAULT signal polarity is inverted. - -Example multi port host USB controller device node : - usb@22000 { - compatible = "fsl-usb2-mph"; - reg = <22000 1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <700>; - interrupts = <27 1>; - phy_type = "ulpi"; - port0; - port1; - }; - -Example dual role USB controller device node : - usb@23000 { - compatible = "fsl-usb2-dr"; - reg = <23000 1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <700>; - interrupts = <26 1>; - dr_mode = "otg"; - phy = "ulpi"; - }; - -Example dual role USB controller device node for MPC5121ADS: - - usb@4000 { - compatible = "fsl,mpc5121-usb2-dr"; - reg = <0x4000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = < &ipic >; - interrupts = <44 0x8>; - dr_mode = "otg"; - phy_type = "utmi_wide"; - fsl,invert-drvvbus; - fsl,invert-pwr-fault; - }; diff --git a/Documentation/powerpc/dts-bindings/gpio/gpio.txt b/Documentation/powerpc/dts-bindings/gpio/gpio.txt deleted file mode 100644 index edaa84d288a..00000000000 --- a/Documentation/powerpc/dts-bindings/gpio/gpio.txt +++ /dev/null @@ -1,50 +0,0 @@ -Specifying GPIO information for devices -============================================ - -1) gpios property ------------------ - -Nodes that makes use of GPIOs should define them using `gpios' property, -format of which is: <&gpio-controller1-phandle gpio1-specifier - &gpio-controller2-phandle gpio2-specifier - 0 /* holes are permitted, means no GPIO 3 */ - &gpio-controller4-phandle gpio4-specifier - ...>; - -Note that gpio-specifier length is controller dependent. - -gpio-specifier may encode: bank, pin position inside the bank, -whether pin is open-drain and whether pin is logically inverted. - -Example of the node using GPIOs: - - node { - gpios = <&qe_pio_e 18 0>; - }; - -In this example gpio-specifier is "18 0" and encodes GPIO pin number, -and empty GPIO flags as accepted by the "qe_pio_e" gpio-controller. - -2) gpio-controller nodes ------------------------- - -Every GPIO controller node must have #gpio-cells property defined, -this information will be used to translate gpio-specifiers. - -Example of two SOC GPIO banks defined as gpio-controller nodes: - - qe_pio_a: gpio-controller@1400 { - #gpio-cells = <2>; - compatible = "fsl,qe-pario-bank-a", "fsl,qe-pario-bank"; - reg = <0x1400 0x18>; - gpio-controller; - }; - - qe_pio_e: gpio-controller@1460 { - #gpio-cells = <2>; - compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank"; - reg = <0x1460 0x18>; - gpio-controller; - }; - - diff --git a/Documentation/powerpc/dts-bindings/gpio/led.txt b/Documentation/powerpc/dts-bindings/gpio/led.txt deleted file mode 100644 index 064db928c3c..00000000000 --- a/Documentation/powerpc/dts-bindings/gpio/led.txt +++ /dev/null @@ -1,58 +0,0 @@ -LEDs connected to GPIO lines - -Required properties: -- compatible : should be "gpio-leds". - -Each LED is represented as a sub-node of the gpio-leds device. Each -node's name represents the name of the corresponding LED. - -LED sub-node properties: -- gpios : Should specify the LED's GPIO, see "Specifying GPIO information - for devices" in Documentation/powerpc/booting-without-of.txt. Active - low LEDs should be indicated using flags in the GPIO specifier. -- label : (optional) The label for this LED. If omitted, the label is - taken from the node name (excluding the unit address). -- linux,default-trigger : (optional) This parameter, if present, is a - string defining the trigger assigned to the LED. Current triggers are: - "backlight" - LED will act as a back-light, controlled by the framebuffer - system - "default-on" - LED will turn on, but see "default-state" below - "heartbeat" - LED "double" flashes at a load average based rate - "ide-disk" - LED indicates disk activity - "timer" - LED flashes at a fixed, configurable rate -- default-state: (optional) The initial state of the LED. Valid - values are "on", "off", and "keep". If the LED is already on or off - and the default-state property is set the to same value, then no - glitch should be produced where the LED momentarily turns off (or - on). The "keep" setting will keep the LED at whatever its current - state is, without producing a glitch. The default is off if this - property is not present. - -Examples: - -leds { - compatible = "gpio-leds"; - hdd { - label = "IDE Activity"; - gpios = <&mcu_pio 0 1>; /* Active low */ - linux,default-trigger = "ide-disk"; - }; - - fault { - gpios = <&mcu_pio 1 0>; - /* Keep LED on if BIOS detected hardware fault */ - default-state = "keep"; - }; -}; - -run-control { - compatible = "gpio-leds"; - red { - gpios = <&mpc8572 6 0>; - default-state = "off"; - }; - green { - gpios = <&mpc8572 7 0>; - default-state = "on"; - }; -} diff --git a/Documentation/powerpc/dts-bindings/gpio/mdio.txt b/Documentation/powerpc/dts-bindings/gpio/mdio.txt deleted file mode 100644 index bc954952901..00000000000 --- a/Documentation/powerpc/dts-bindings/gpio/mdio.txt +++ /dev/null @@ -1,19 +0,0 @@ -MDIO on GPIOs - -Currently defined compatibles: -- virtual,gpio-mdio - -MDC and MDIO lines connected to GPIO controllers are listed in the -gpios property as described in section VIII.1 in the following order: - -MDC, MDIO. - -Example: - -mdio { - compatible = "virtual,mdio-gpio"; - #address-cells = <1>; - #size-cells = <0>; - gpios = <&qe_pio_a 11 - &qe_pio_c 6>; -}; diff --git a/Documentation/powerpc/dts-bindings/marvell.txt b/Documentation/powerpc/dts-bindings/marvell.txt deleted file mode 100644 index f1533d91953..00000000000 --- a/Documentation/powerpc/dts-bindings/marvell.txt +++ /dev/null @@ -1,521 +0,0 @@ -Marvell Discovery mv64[345]6x System Controller chips -=========================================================== - -The Marvell mv64[345]60 series of system controller chips contain -many of the peripherals needed to implement a complete computer -system. In this section, we define device tree nodes to describe -the system controller chip itself and each of the peripherals -which it contains. Compatible string values for each node are -prefixed with the string "marvell,", for Marvell Technology Group Ltd. - -1) The /system-controller node - - This node is used to represent the system-controller and must be - present when the system uses a system controller chip. The top-level - system-controller node contains information that is global to all - devices within the system controller chip. The node name begins - with "system-controller" followed by the unit address, which is - the base address of the memory-mapped register set for the system - controller chip. - - Required properties: - - - ranges : Describes the translation of system controller addresses - for memory mapped registers. - - clock-frequency: Contains the main clock frequency for the system - controller chip. - - reg : This property defines the address and size of the - memory-mapped registers contained within the system controller - chip. The address specified in the "reg" property should match - the unit address of the system-controller node. - - #address-cells : Address representation for system controller - devices. This field represents the number of cells needed to - represent the address of the memory-mapped registers of devices - within the system controller chip. - - #size-cells : Size representation for the memory-mapped - registers within the system controller chip. - - #interrupt-cells : Defines the width of cells used to represent - interrupts. - - Optional properties: - - - model : The specific model of the system controller chip. Such - as, "mv64360", "mv64460", or "mv64560". - - compatible : A string identifying the compatibility identifiers - of the system controller chip. - - The system-controller node contains child nodes for each system - controller device that the platform uses. Nodes should not be created - for devices which exist on the system controller chip but are not used - - Example Marvell Discovery mv64360 system-controller node: - - system-controller@f1000000 { /* Marvell Discovery mv64360 */ - #address-cells = <1>; - #size-cells = <1>; - model = "mv64360"; /* Default */ - compatible = "marvell,mv64360"; - clock-frequency = <133333333>; - reg = <0xf1000000 0x10000>; - virtual-reg = <0xf1000000>; - ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */ - 0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */ - 0xa0000000 0xa0000000 0x4000000 /* User FLASH */ - 0x00000000 0xf1000000 0x0010000 /* Bridge's regs */ - 0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */ - - [ child node definitions... ] - } - -2) Child nodes of /system-controller - - a) Marvell Discovery MDIO bus - - The MDIO is a bus to which the PHY devices are connected. For each - device that exists on this bus, a child node should be created. See - the definition of the PHY node below for an example of how to define - a PHY. - - Required properties: - - #address-cells : Should be <1> - - #size-cells : Should be <0> - - device_type : Should be "mdio" - - compatible : Should be "marvell,mv64360-mdio" - - Example: - - mdio { - #address-cells = <1>; - #size-cells = <0>; - device_type = "mdio"; - compatible = "marvell,mv64360-mdio"; - - ethernet-phy@0 { - ...... - }; - }; - - - b) Marvell Discovery ethernet controller - - The Discover ethernet controller is described with two levels - of nodes. The first level describes an ethernet silicon block - and the second level describes up to 3 ethernet nodes within - that block. The reason for the multiple levels is that the - registers for the node are interleaved within a single set - of registers. The "ethernet-block" level describes the - shared register set, and the "ethernet" nodes describe ethernet - port-specific properties. - - Ethernet block node - - Required properties: - - #address-cells : <1> - - #size-cells : <0> - - compatible : "marvell,mv64360-eth-block" - - reg : Offset and length of the register set for this block - - Example Discovery Ethernet block node: - ethernet-block@2000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,mv64360-eth-block"; - reg = <0x2000 0x2000>; - ethernet@0 { - ....... - }; - }; - - Ethernet port node - - Required properties: - - device_type : Should be "network". - - compatible : Should be "marvell,mv64360-eth". - - reg : Should be <0>, <1>, or <2>, according to which registers - within the silicon block the device uses. - - interrupts : where a is the interrupt number for the port. - - interrupt-parent : the phandle for the interrupt controller - that services interrupts for this device. - - phy : the phandle for the PHY connected to this ethernet - controller. - - local-mac-address : 6 bytes, MAC address - - Example Discovery Ethernet port node: - ethernet@0 { - device_type = "network"; - compatible = "marvell,mv64360-eth"; - reg = <0>; - interrupts = <32>; - interrupt-parent = <&PIC>; - phy = <&PHY0>; - local-mac-address = [ 00 00 00 00 00 00 ]; - }; - - - - c) Marvell Discovery PHY nodes - - Required properties: - - device_type : Should be "ethernet-phy" - - interrupts : where a is the interrupt number for this phy. - - interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. - - reg : The ID number for the phy, usually a small integer - - Example Discovery PHY node: - ethernet-phy@1 { - device_type = "ethernet-phy"; - compatible = "broadcom,bcm5421"; - interrupts = <76>; /* GPP 12 */ - interrupt-parent = <&PIC>; - reg = <1>; - }; - - - d) Marvell Discovery SDMA nodes - - Represent DMA hardware associated with the MPSC (multiprotocol - serial controllers). - - Required properties: - - compatible : "marvell,mv64360-sdma" - - reg : Offset and length of the register set for this device - - interrupts : where a is the interrupt number for the DMA - device. - - interrupt-parent : the phandle for the interrupt controller - that services interrupts for this device. - - Example Discovery SDMA node: - sdma@4000 { - compatible = "marvell,mv64360-sdma"; - reg = <0x4000 0xc18>; - virtual-reg = <0xf1004000>; - interrupts = <36>; - interrupt-parent = <&PIC>; - }; - - - e) Marvell Discovery BRG nodes - - Represent baud rate generator hardware associated with the MPSC - (multiprotocol serial controllers). - - Required properties: - - compatible : "marvell,mv64360-brg" - - reg : Offset and length of the register set for this device - - clock-src : A value from 0 to 15 which selects the clock - source for the baud rate generator. This value corresponds - to the CLKS value in the BRGx configuration register. See - the mv64x60 User's Manual. - - clock-frequence : The frequency (in Hz) of the baud rate - generator's input clock. - - current-speed : The current speed setting (presumably by - firmware) of the baud rate generator. - - Example Discovery BRG node: - brg@b200 { - compatible = "marvell,mv64360-brg"; - reg = <0xb200 0x8>; - clock-src = <8>; - clock-frequency = <133333333>; - current-speed = <9600>; - }; - - - f) Marvell Discovery CUNIT nodes - - Represent the Serial Communications Unit device hardware. - - Required properties: - - reg : Offset and length of the register set for this device - - Example Discovery CUNIT node: - cunit@f200 { - reg = <0xf200 0x200>; - }; - - - g) Marvell Discovery MPSCROUTING nodes - - Represent the Discovery's MPSC routing hardware - - Required properties: - - reg : Offset and length of the register set for this device - - Example Discovery CUNIT node: - mpscrouting@b500 { - reg = <0xb400 0xc>; - }; - - - h) Marvell Discovery MPSCINTR nodes - - Represent the Discovery's MPSC DMA interrupt hardware registers - (SDMA cause and mask registers). - - Required properties: - - reg : Offset and length of the register set for this device - - Example Discovery MPSCINTR node: - mpsintr@b800 { - reg = <0xb800 0x100>; - }; - - - i) Marvell Discovery MPSC nodes - - Represent the Discovery's MPSC (Multiprotocol Serial Controller) - serial port. - - Required properties: - - device_type : "serial" - - compatible : "marvell,mv64360-mpsc" - - reg : Offset and length of the register set for this device - - sdma : the phandle for the SDMA node used by this port - - brg : the phandle for the BRG node used by this port - - cunit : the phandle for the CUNIT node used by this port - - mpscrouting : the phandle for the MPSCROUTING node used by this port - - mpscintr : the phandle for the MPSCINTR node used by this port - - cell-index : the hardware index of this cell in the MPSC core - - max_idle : value needed for MPSC CHR3 (Maximum Frame Length) - register - - interrupts : where a is the interrupt number for the MPSC. - - interrupt-parent : the phandle for the interrupt controller - that services interrupts for this device. - - Example Discovery MPSCINTR node: - mpsc@8000 { - device_type = "serial"; - compatible = "marvell,mv64360-mpsc"; - reg = <0x8000 0x38>; - virtual-reg = <0xf1008000>; - sdma = <&SDMA0>; - brg = <&BRG0>; - cunit = <&CUNIT>; - mpscrouting = <&MPSCROUTING>; - mpscintr = <&MPSCINTR>; - cell-index = <0>; - max_idle = <40>; - interrupts = <40>; - interrupt-parent = <&PIC>; - }; - - - j) Marvell Discovery Watch Dog Timer nodes - - Represent the Discovery's watchdog timer hardware - - Required properties: - - compatible : "marvell,mv64360-wdt" - - reg : Offset and length of the register set for this device - - Example Discovery Watch Dog Timer node: - wdt@b410 { - compatible = "marvell,mv64360-wdt"; - reg = <0xb410 0x8>; - }; - - - k) Marvell Discovery I2C nodes - - Represent the Discovery's I2C hardware - - Required properties: - - device_type : "i2c" - - compatible : "marvell,mv64360-i2c" - - reg : Offset and length of the register set for this device - - interrupts : where a is the interrupt number for the I2C. - - interrupt-parent : the phandle for the interrupt controller - that services interrupts for this device. - - Example Discovery I2C node: - compatible = "marvell,mv64360-i2c"; - reg = <0xc000 0x20>; - virtual-reg = <0xf100c000>; - interrupts = <37>; - interrupt-parent = <&PIC>; - }; - - - l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes - - Represent the Discovery's PIC hardware - - Required properties: - - #interrupt-cells : <1> - - #address-cells : <0> - - compatible : "marvell,mv64360-pic" - - reg : Offset and length of the register set for this device - - interrupt-controller - - Example Discovery PIC node: - pic { - #interrupt-cells = <1>; - #address-cells = <0>; - compatible = "marvell,mv64360-pic"; - reg = <0x0 0x88>; - interrupt-controller; - }; - - - m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes - - Represent the Discovery's MPP hardware - - Required properties: - - compatible : "marvell,mv64360-mpp" - - reg : Offset and length of the register set for this device - - Example Discovery MPP node: - mpp@f000 { - compatible = "marvell,mv64360-mpp"; - reg = <0xf000 0x10>; - }; - - - n) Marvell Discovery GPP (General Purpose Pins) nodes - - Represent the Discovery's GPP hardware - - Required properties: - - compatible : "marvell,mv64360-gpp" - - reg : Offset and length of the register set for this device - - Example Discovery GPP node: - gpp@f000 { - compatible = "marvell,mv64360-gpp"; - reg = <0xf100 0x20>; - }; - - - o) Marvell Discovery PCI host bridge node - - Represents the Discovery's PCI host bridge device. The properties - for this node conform to Rev 2.1 of the PCI Bus Binding to IEEE - 1275-1994. A typical value for the compatible property is - "marvell,mv64360-pci". - - Example Discovery PCI host bridge node - pci@80000000 { - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - compatible = "marvell,mv64360-pci"; - reg = <0xcf8 0x8>; - ranges = <0x01000000 0x0 0x0 - 0x88000000 0x0 0x01000000 - 0x02000000 0x0 0x80000000 - 0x80000000 0x0 0x08000000>; - bus-range = <0 255>; - clock-frequency = <66000000>; - interrupt-parent = <&PIC>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0a */ - 0x5000 0 0 1 &PIC 80 - 0x5000 0 0 2 &PIC 81 - 0x5000 0 0 3 &PIC 91 - 0x5000 0 0 4 &PIC 93 - - /* IDSEL 0x0b */ - 0x5800 0 0 1 &PIC 91 - 0x5800 0 0 2 &PIC 93 - 0x5800 0 0 3 &PIC 80 - 0x5800 0 0 4 &PIC 81 - - /* IDSEL 0x0c */ - 0x6000 0 0 1 &PIC 91 - 0x6000 0 0 2 &PIC 93 - 0x6000 0 0 3 &PIC 80 - 0x6000 0 0 4 &PIC 81 - - /* IDSEL 0x0d */ - 0x6800 0 0 1 &PIC 93 - 0x6800 0 0 2 &PIC 80 - 0x6800 0 0 3 &PIC 81 - 0x6800 0 0 4 &PIC 91 - >; - }; - - - p) Marvell Discovery CPU Error nodes - - Represent the Discovery's CPU error handler device. - - Required properties: - - compatible : "marvell,mv64360-cpu-error" - - reg : Offset and length of the register set for this device - - interrupts : the interrupt number for this device - - interrupt-parent : the phandle for the interrupt controller - that services interrupts for this device. - - Example Discovery CPU Error node: - cpu-error@0070 { - compatible = "marvell,mv64360-cpu-error"; - reg = <0x70 0x10 0x128 0x28>; - interrupts = <3>; - interrupt-parent = <&PIC>; - }; - - - q) Marvell Discovery SRAM Controller nodes - - Represent the Discovery's SRAM controller device. - - Required properties: - - compatible : "marvell,mv64360-sram-ctrl" - - reg : Offset and length of the register set for this device - - interrupts : the interrupt number for this device - - interrupt-parent : the phandle for the interrupt controller - that services interrupts for this device. - - Example Discovery SRAM Controller node: - sram-ctrl@0380 { - compatible = "marvell,mv64360-sram-ctrl"; - reg = <0x380 0x80>; - interrupts = <13>; - interrupt-parent = <&PIC>; - }; - - - r) Marvell Discovery PCI Error Handler nodes - - Represent the Discovery's PCI error handler device. - - Required properties: - - compatible : "marvell,mv64360-pci-error" - - reg : Offset and length of the register set for this device - - interrupts : the interrupt number for this device - - interrupt-parent : the phandle for the interrupt controller - that services interrupts for this device. - - Example Discovery PCI Error Handler node: - pci-error@1d40 { - compatible = "marvell,mv64360-pci-error"; - reg = <0x1d40 0x40 0xc28 0x4>; - interrupts = <12>; - interrupt-parent = <&PIC>; - }; - - - s) Marvell Discovery Memory Controller nodes - - Represent the Discovery's memory controller device. - - Required properties: - - compatible : "marvell,mv64360-mem-ctrl" - - reg : Offset and length of the register set for this device - - interrupts : the interrupt number for this device - - interrupt-parent : the phandle for the interrupt controller - that services interrupts for this device. - - Example Discovery Memory Controller node: - mem-ctrl@1400 { - compatible = "marvell,mv64360-mem-ctrl"; - reg = <0x1400 0x60>; - interrupts = <17>; - interrupt-parent = <&PIC>; - }; - - diff --git a/Documentation/powerpc/dts-bindings/mmc-spi-slot.txt b/Documentation/powerpc/dts-bindings/mmc-spi-slot.txt deleted file mode 100644 index c39ac289195..00000000000 --- a/Documentation/powerpc/dts-bindings/mmc-spi-slot.txt +++ /dev/null @@ -1,23 +0,0 @@ -MMC/SD/SDIO slot directly connected to a SPI bus - -Required properties: -- compatible : should be "mmc-spi-slot". -- reg : should specify SPI address (chip-select number). -- spi-max-frequency : maximum frequency for this device (Hz). -- voltage-ranges : two cells are required, first cell specifies minimum - slot voltage (mV), second cell specifies maximum slot voltage (mV). - Several ranges could be specified. -- gpios : (optional) may specify GPIOs in this order: Card-Detect GPIO, - Write-Protect GPIO. - -Example: - - mmc-slot@0 { - compatible = "fsl,mpc8323rdb-mmc-slot", - "mmc-spi-slot"; - reg = <0>; - gpios = <&qe_pio_d 14 1 - &qe_pio_d 15 0>; - voltage-ranges = <3300 3300>; - spi-max-frequency = <50000000>; - }; diff --git a/Documentation/powerpc/dts-bindings/mtd-physmap.txt b/Documentation/powerpc/dts-bindings/mtd-physmap.txt deleted file mode 100644 index 80152cb567d..00000000000 --- a/Documentation/powerpc/dts-bindings/mtd-physmap.txt +++ /dev/null @@ -1,90 +0,0 @@ -CFI or JEDEC memory-mapped NOR flash, MTD-RAM (NVRAM...) - -Flash chips (Memory Technology Devices) are often used for solid state -file systems on embedded devices. - - - compatible : should contain the specific model of mtd chip(s) - used, if known, followed by either "cfi-flash", "jedec-flash" - or "mtd-ram". - - reg : Address range(s) of the mtd chip(s) - It's possible to (optionally) define multiple "reg" tuples so that - non-identical chips can be described in one node. - - bank-width : Width (in bytes) of the bank. Equal to the - device width times the number of interleaved chips. - - device-width : (optional) Width of a single mtd chip. If - omitted, assumed to be equal to 'bank-width'. - - #address-cells, #size-cells : Must be present if the device has - sub-nodes representing partitions (see below). In this case - both #address-cells and #size-cells must be equal to 1. - -For JEDEC compatible devices, the following additional properties -are defined: - - - vendor-id : Contains the flash chip's vendor id (1 byte). - - device-id : Contains the flash chip's device id (1 byte). - -In addition to the information on the mtd bank itself, the -device tree may optionally contain additional information -describing partitions of the address space. This can be -used on platforms which have strong conventions about which -portions of a flash are used for what purposes, but which don't -use an on-flash partition table such as RedBoot. - -Each partition is represented as a sub-node of the mtd device. -Each node's name represents the name of the corresponding -partition of the mtd device. - -Flash partitions - - reg : The partition's offset and size within the mtd bank. - - label : (optional) The label / name for this partition. - If omitted, the label is taken from the node name (excluding - the unit address). - - read-only : (optional) This parameter, if present, is a hint to - Linux that this partition should only be mounted - read-only. This is usually used for flash partitions - containing early-boot firmware images or data which should not - be clobbered. - -Example: - - flash@ff000000 { - compatible = "amd,am29lv128ml", "cfi-flash"; - reg = ; - bank-width = <4>; - device-width = <1>; - #address-cells = <1>; - #size-cells = <1>; - fs@0 { - label = "fs"; - reg = <0 f80000>; - }; - firmware@f80000 { - label ="firmware"; - reg = ; - read-only; - }; - }; - -Here an example with multiple "reg" tuples: - - flash@f0000000,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "intel,PC48F4400P0VB", "cfi-flash"; - reg = <0 0x00000000 0x02000000 - 0 0x02000000 0x02000000>; - bank-width = <2>; - partition@0 { - label = "test-part1"; - reg = <0 0x04000000>; - }; - }; - -An example using SRAM: - - sram@2,0 { - compatible = "samsung,k6f1616u6a", "mtd-ram"; - reg = <2 0 0x00200000>; - bank-width = <2>; - }; - diff --git a/Documentation/powerpc/dts-bindings/nintendo/gamecube.txt b/Documentation/powerpc/dts-bindings/nintendo/gamecube.txt deleted file mode 100644 index b558585b1aa..00000000000 --- a/Documentation/powerpc/dts-bindings/nintendo/gamecube.txt +++ /dev/null @@ -1,109 +0,0 @@ - -Nintendo GameCube device tree -============================= - -1) The "flipper" node - - This node represents the multi-function "Flipper" chip, which packages - many of the devices found in the Nintendo GameCube. - - Required properties: - - - compatible : Should be "nintendo,flipper" - -1.a) The Video Interface (VI) node - - Represents the interface between the graphics processor and a external - video encoder. - - Required properties: - - - compatible : should be "nintendo,flipper-vi" - - reg : should contain the VI registers location and length - - interrupts : should contain the VI interrupt - -1.b) The Processor Interface (PI) node - - Represents the data and control interface between the main processor - and graphics and audio processor. - - Required properties: - - - compatible : should be "nintendo,flipper-pi" - - reg : should contain the PI registers location and length - -1.b.i) The "Flipper" interrupt controller node - - Represents the interrupt controller within the "Flipper" chip. - The node for the "Flipper" interrupt controller must be placed under - the PI node. - - Required properties: - - - compatible : should be "nintendo,flipper-pic" - -1.c) The Digital Signal Procesor (DSP) node - - Represents the digital signal processor interface, designed to offload - audio related tasks. - - Required properties: - - - compatible : should be "nintendo,flipper-dsp" - - reg : should contain the DSP registers location and length - - interrupts : should contain the DSP interrupt - -1.c.i) The Auxiliary RAM (ARAM) node - - Represents the non cpu-addressable ram designed mainly to store audio - related information. - The ARAM node must be placed under the DSP node. - - Required properties: - - - compatible : should be "nintendo,flipper-aram" - - reg : should contain the ARAM start (zero-based) and length - -1.d) The Disk Interface (DI) node - - Represents the interface used to communicate with mass storage devices. - - Required properties: - - - compatible : should be "nintendo,flipper-di" - - reg : should contain the DI registers location and length - - interrupts : should contain the DI interrupt - -1.e) The Audio Interface (AI) node - - Represents the interface to the external 16-bit stereo digital-to-analog - converter. - - Required properties: - - - compatible : should be "nintendo,flipper-ai" - - reg : should contain the AI registers location and length - - interrupts : should contain the AI interrupt - -1.f) The Serial Interface (SI) node - - Represents the interface to the four single bit serial interfaces. - The SI is a proprietary serial interface used normally to control gamepads. - It's NOT a RS232-type interface. - - Required properties: - - - compatible : should be "nintendo,flipper-si" - - reg : should contain the SI registers location and length - - interrupts : should contain the SI interrupt - -1.g) The External Interface (EXI) node - - Represents the multi-channel SPI-like interface. - - Required properties: - - - compatible : should be "nintendo,flipper-exi" - - reg : should contain the EXI registers location and length - - interrupts : should contain the EXI interrupt - diff --git a/Documentation/powerpc/dts-bindings/nintendo/wii.txt b/Documentation/powerpc/dts-bindings/nintendo/wii.txt deleted file mode 100644 index a7e155a023b..00000000000 --- a/Documentation/powerpc/dts-bindings/nintendo/wii.txt +++ /dev/null @@ -1,184 +0,0 @@ - -Nintendo Wii device tree -======================== - -0) The root node - - This node represents the Nintendo Wii video game console. - - Required properties: - - - model : Should be "nintendo,wii" - - compatible : Should be "nintendo,wii" - -1) The "hollywood" node - - This node represents the multi-function "Hollywood" chip, which packages - many of the devices found in the Nintendo Wii. - - Required properties: - - - compatible : Should be "nintendo,hollywood" - -1.a) The Video Interface (VI) node - - Represents the interface between the graphics processor and a external - video encoder. - - Required properties: - - - compatible : should be "nintendo,hollywood-vi","nintendo,flipper-vi" - - reg : should contain the VI registers location and length - - interrupts : should contain the VI interrupt - -1.b) The Processor Interface (PI) node - - Represents the data and control interface between the main processor - and graphics and audio processor. - - Required properties: - - - compatible : should be "nintendo,hollywood-pi","nintendo,flipper-pi" - - reg : should contain the PI registers location and length - -1.b.i) The "Flipper" interrupt controller node - - Represents the "Flipper" interrupt controller within the "Hollywood" chip. - The node for the "Flipper" interrupt controller must be placed under - the PI node. - - Required properties: - - - #interrupt-cells : <1> - - compatible : should be "nintendo,flipper-pic" - - interrupt-controller - -1.c) The Digital Signal Procesor (DSP) node - - Represents the digital signal processor interface, designed to offload - audio related tasks. - - Required properties: - - - compatible : should be "nintendo,hollywood-dsp","nintendo,flipper-dsp" - - reg : should contain the DSP registers location and length - - interrupts : should contain the DSP interrupt - -1.d) The Serial Interface (SI) node - - Represents the interface to the four single bit serial interfaces. - The SI is a proprietary serial interface used normally to control gamepads. - It's NOT a RS232-type interface. - - Required properties: - - - compatible : should be "nintendo,hollywood-si","nintendo,flipper-si" - - reg : should contain the SI registers location and length - - interrupts : should contain the SI interrupt - -1.e) The Audio Interface (AI) node - - Represents the interface to the external 16-bit stereo digital-to-analog - converter. - - Required properties: - - - compatible : should be "nintendo,hollywood-ai","nintendo,flipper-ai" - - reg : should contain the AI registers location and length - - interrupts : should contain the AI interrupt - -1.f) The External Interface (EXI) node - - Represents the multi-channel SPI-like interface. - - Required properties: - - - compatible : should be "nintendo,hollywood-exi","nintendo,flipper-exi" - - reg : should contain the EXI registers location and length - - interrupts : should contain the EXI interrupt - -1.g) The Open Host Controller Interface (OHCI) nodes - - Represent the USB 1.x Open Host Controller Interfaces. - - Required properties: - - - compatible : should be "nintendo,hollywood-usb-ohci","usb-ohci" - - reg : should contain the OHCI registers location and length - - interrupts : should contain the OHCI interrupt - -1.h) The Enhanced Host Controller Interface (EHCI) node - - Represents the USB 2.0 Enhanced Host Controller Interface. - - Required properties: - - - compatible : should be "nintendo,hollywood-usb-ehci","usb-ehci" - - reg : should contain the EHCI registers location and length - - interrupts : should contain the EHCI interrupt - -1.i) The Secure Digital Host Controller Interface (SDHCI) nodes - - Represent the Secure Digital Host Controller Interfaces. - - Required properties: - - - compatible : should be "nintendo,hollywood-sdhci","sdhci" - - reg : should contain the SDHCI registers location and length - - interrupts : should contain the SDHCI interrupt - -1.j) The Inter-Processsor Communication (IPC) node - - Represent the Inter-Processor Communication interface. This interface - enables communications between the Broadway and the Starlet processors. - - - compatible : should be "nintendo,hollywood-ipc" - - reg : should contain the IPC registers location and length - - interrupts : should contain the IPC interrupt - -1.k) The "Hollywood" interrupt controller node - - Represents the "Hollywood" interrupt controller within the - "Hollywood" chip. - - Required properties: - - - #interrupt-cells : <1> - - compatible : should be "nintendo,hollywood-pic" - - reg : should contain the controller registers location and length - - interrupt-controller - - interrupts : should contain the cascade interrupt of the "flipper" pic - - interrupt-parent: should contain the phandle of the "flipper" pic - -1.l) The General Purpose I/O (GPIO) controller node - - Represents the dual access 32 GPIO controller interface. - - Required properties: - - - #gpio-cells : <2> - - compatible : should be "nintendo,hollywood-gpio" - - reg : should contain the IPC registers location and length - - gpio-controller - -1.m) The control node - - Represents the control interface used to setup several miscellaneous - settings of the "Hollywood" chip like boot memory mappings, resets, - disk interface mode, etc. - - Required properties: - - - compatible : should be "nintendo,hollywood-control" - - reg : should contain the control registers location and length - -1.n) The Disk Interface (DI) node - - Represents the interface used to communicate with mass storage devices. - - Required properties: - - - compatible : should be "nintendo,hollywood-di" - - reg : should contain the DI registers location and length - - interrupts : should contain the DI interrupt - diff --git a/Documentation/powerpc/dts-bindings/phy.txt b/Documentation/powerpc/dts-bindings/phy.txt deleted file mode 100644 index bb8c742eb8c..00000000000 --- a/Documentation/powerpc/dts-bindings/phy.txt +++ /dev/null @@ -1,25 +0,0 @@ -PHY nodes - -Required properties: - - - device_type : Should be "ethernet-phy" - - interrupts : where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. - - interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. - - reg : The ID number for the phy, usually a small integer - - linux,phandle : phandle for this node; likely referenced by an - ethernet controller node. - -Example: - -ethernet-phy@0 { - linux,phandle = <2452000> - interrupt-parent = <40000>; - interrupts = <35 1>; - reg = <0>; - device_type = "ethernet-phy"; -}; diff --git a/Documentation/powerpc/dts-bindings/spi-bus.txt b/Documentation/powerpc/dts-bindings/spi-bus.txt deleted file mode 100644 index e782add2e45..00000000000 --- a/Documentation/powerpc/dts-bindings/spi-bus.txt +++ /dev/null @@ -1,57 +0,0 @@ -SPI (Serial Peripheral Interface) busses - -SPI busses can be described with a node for the SPI master device -and a set of child nodes for each SPI slave on the bus. For this -discussion, it is assumed that the system's SPI controller is in -SPI master mode. This binding does not describe SPI controllers -in slave mode. - -The SPI master node requires the following properties: -- #address-cells - number of cells required to define a chip select - address on the SPI bus. -- #size-cells - should be zero. -- compatible - name of SPI bus controller following generic names - recommended practice. -No other properties are required in the SPI bus node. It is assumed -that a driver for an SPI bus device will understand that it is an SPI bus. -However, the binding does not attempt to define the specific method for -assigning chip select numbers. Since SPI chip select configuration is -flexible and non-standardized, it is left out of this binding with the -assumption that board specific platform code will be used to manage -chip selects. Individual drivers can define additional properties to -support describing the chip select layout. - -SPI slave nodes must be children of the SPI master node and can -contain the following properties. -- reg - (required) chip select address of device. -- compatible - (required) name of SPI device following generic names - recommended practice -- spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz -- spi-cpol - (optional) Empty property indicating device requires - inverse clock polarity (CPOL) mode -- spi-cpha - (optional) Empty property indicating device requires - shifted clock phase (CPHA) mode -- spi-cs-high - (optional) Empty property indicating device requires - chip select active high - -SPI example for an MPC5200 SPI bus: - spi@f00 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; - reg = <0xf00 0x20>; - interrupts = <2 13 0 2 14 0>; - interrupt-parent = <&mpc5200_pic>; - - ethernet-switch@0 { - compatible = "micrel,ks8995m"; - spi-max-frequency = <1000000>; - reg = <0>; - }; - - codec@1 { - compatible = "ti,tlv320aic26"; - spi-max-frequency = <100000>; - reg = <1>; - }; - }; diff --git a/Documentation/powerpc/dts-bindings/usb-ehci.txt b/Documentation/powerpc/dts-bindings/usb-ehci.txt deleted file mode 100644 index fa18612f757..00000000000 --- a/Documentation/powerpc/dts-bindings/usb-ehci.txt +++ /dev/null @@ -1,25 +0,0 @@ -USB EHCI controllers - -Required properties: - - compatible : should be "usb-ehci". - - reg : should contain at least address and length of the standard EHCI - register set for the device. Optional platform-dependent registers - (debug-port or other) can be also specified here, but only after - definition of standard EHCI registers. - - interrupts : one EHCI interrupt should be described here. -If device registers are implemented in big endian mode, the device -node should have "big-endian-regs" property. -If controller implementation operates with big endian descriptors, -"big-endian-desc" property should be specified. -If both big endian registers and descriptors are used by the controller -implementation, "big-endian" property can be specified instead of having -both "big-endian-regs" and "big-endian-desc". - -Example (Sequoia 440EPx): - ehci@e0000300 { - compatible = "ibm,usb-ehci-440epx", "usb-ehci"; - interrupt-parent = <&UIC0>; - interrupts = <1a 4>; - reg = <0 e0000300 90 0 e0000390 70>; - big-endian; - }; diff --git a/Documentation/powerpc/dts-bindings/xilinx.txt b/Documentation/powerpc/dts-bindings/xilinx.txt deleted file mode 100644 index 299d0923537..00000000000 --- a/Documentation/powerpc/dts-bindings/xilinx.txt +++ /dev/null @@ -1,306 +0,0 @@ - d) Xilinx IP cores - - The Xilinx EDK toolchain ships with a set of IP cores (devices) for use - in Xilinx Spartan and Virtex FPGAs. The devices cover the whole range - of standard device types (network, serial, etc.) and miscellaneous - devices (gpio, LCD, spi, etc). Also, since these devices are - implemented within the fpga fabric every instance of the device can be - synthesised with different options that change the behaviour. - - Each IP-core has a set of parameters which the FPGA designer can use to - control how the core is synthesized. Historically, the EDK tool would - extract the device parameters relevant to device drivers and copy them - into an 'xparameters.h' in the form of #define symbols. This tells the - device drivers how the IP cores are configured, but it requires the kernel - to be recompiled every time the FPGA bitstream is resynthesized. - - The new approach is to export the parameters into the device tree and - generate a new device tree each time the FPGA bitstream changes. The - parameters which used to be exported as #defines will now become - properties of the device node. In general, device nodes for IP-cores - will take the following form: - - (name): (generic-name)@(base-address) { - compatible = "xlnx,(ip-core-name)-(HW_VER)" - [, (list of compatible devices), ...]; - reg = <(baseaddr) (size)>; - interrupt-parent = <&interrupt-controller-phandle>; - interrupts = < ... >; - xlnx,(parameter1) = "(string-value)"; - xlnx,(parameter2) = <(int-value)>; - }; - - (generic-name): an open firmware-style name that describes the - generic class of device. Preferably, this is one word, such - as 'serial' or 'ethernet'. - (ip-core-name): the name of the ip block (given after the BEGIN - directive in system.mhs). Should be in lowercase - and all underscores '_' converted to dashes '-'. - (name): is derived from the "PARAMETER INSTANCE" value. - (parameter#): C_* parameters from system.mhs. The C_ prefix is - dropped from the parameter name, the name is converted - to lowercase and all underscore '_' characters are - converted to dashes '-'. - (baseaddr): the baseaddr parameter value (often named C_BASEADDR). - (HW_VER): from the HW_VER parameter. - (size): the address range size (often C_HIGHADDR - C_BASEADDR + 1). - - Typically, the compatible list will include the exact IP core version - followed by an older IP core version which implements the same - interface or any other device with the same interface. - - 'reg', 'interrupt-parent' and 'interrupts' are all optional properties. - - For example, the following block from system.mhs: - - BEGIN opb_uartlite - PARAMETER INSTANCE = opb_uartlite_0 - PARAMETER HW_VER = 1.00.b - PARAMETER C_BAUDRATE = 115200 - PARAMETER C_DATA_BITS = 8 - PARAMETER C_ODD_PARITY = 0 - PARAMETER C_USE_PARITY = 0 - PARAMETER C_CLK_FREQ = 50000000 - PARAMETER C_BASEADDR = 0xEC100000 - PARAMETER C_HIGHADDR = 0xEC10FFFF - BUS_INTERFACE SOPB = opb_7 - PORT OPB_Clk = CLK_50MHz - PORT Interrupt = opb_uartlite_0_Interrupt - PORT RX = opb_uartlite_0_RX - PORT TX = opb_uartlite_0_TX - PORT OPB_Rst = sys_bus_reset_0 - END - - becomes the following device tree node: - - opb_uartlite_0: serial@ec100000 { - device_type = "serial"; - compatible = "xlnx,opb-uartlite-1.00.b"; - reg = ; - interrupt-parent = <&opb_intc_0>; - interrupts = <1 0>; // got this from the opb_intc parameters - current-speed = ; // standard serial device prop - clock-frequency = ; // standard serial device prop - xlnx,data-bits = <8>; - xlnx,odd-parity = <0>; - xlnx,use-parity = <0>; - }; - - Some IP cores actually implement 2 or more logical devices. In - this case, the device should still describe the whole IP core with - a single node and add a child node for each logical device. The - ranges property can be used to translate from parent IP-core to the - registers of each device. In addition, the parent node should be - compatible with the bus type 'xlnx,compound', and should contain - #address-cells and #size-cells, as with any other bus. (Note: this - makes the assumption that both logical devices have the same bus - binding. If this is not true, then separate nodes should be used - for each logical device). The 'cell-index' property can be used to - enumerate logical devices within an IP core. For example, the - following is the system.mhs entry for the dual ps2 controller found - on the ml403 reference design. - - BEGIN opb_ps2_dual_ref - PARAMETER INSTANCE = opb_ps2_dual_ref_0 - PARAMETER HW_VER = 1.00.a - PARAMETER C_BASEADDR = 0xA9000000 - PARAMETER C_HIGHADDR = 0xA9001FFF - BUS_INTERFACE SOPB = opb_v20_0 - PORT Sys_Intr1 = ps2_1_intr - PORT Sys_Intr2 = ps2_2_intr - PORT Clkin1 = ps2_clk_rx_1 - PORT Clkin2 = ps2_clk_rx_2 - PORT Clkpd1 = ps2_clk_tx_1 - PORT Clkpd2 = ps2_clk_tx_2 - PORT Rx1 = ps2_d_rx_1 - PORT Rx2 = ps2_d_rx_2 - PORT Txpd1 = ps2_d_tx_1 - PORT Txpd2 = ps2_d_tx_2 - END - - It would result in the following device tree nodes: - - opb_ps2_dual_ref_0: opb-ps2-dual-ref@a9000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "xlnx,compound"; - ranges = <0 a9000000 2000>; - // If this device had extra parameters, then they would - // go here. - ps2@0 { - compatible = "xlnx,opb-ps2-dual-ref-1.00.a"; - reg = <0 40>; - interrupt-parent = <&opb_intc_0>; - interrupts = <3 0>; - cell-index = <0>; - }; - ps2@1000 { - compatible = "xlnx,opb-ps2-dual-ref-1.00.a"; - reg = <1000 40>; - interrupt-parent = <&opb_intc_0>; - interrupts = <3 0>; - cell-index = <0>; - }; - }; - - Also, the system.mhs file defines bus attachments from the processor - to the devices. The device tree structure should reflect the bus - attachments. Again an example; this system.mhs fragment: - - BEGIN ppc405_virtex4 - PARAMETER INSTANCE = ppc405_0 - PARAMETER HW_VER = 1.01.a - BUS_INTERFACE DPLB = plb_v34_0 - BUS_INTERFACE IPLB = plb_v34_0 - END - - BEGIN opb_intc - PARAMETER INSTANCE = opb_intc_0 - PARAMETER HW_VER = 1.00.c - PARAMETER C_BASEADDR = 0xD1000FC0 - PARAMETER C_HIGHADDR = 0xD1000FDF - BUS_INTERFACE SOPB = opb_v20_0 - END - - BEGIN opb_uart16550 - PARAMETER INSTANCE = opb_uart16550_0 - PARAMETER HW_VER = 1.00.d - PARAMETER C_BASEADDR = 0xa0000000 - PARAMETER C_HIGHADDR = 0xa0001FFF - BUS_INTERFACE SOPB = opb_v20_0 - END - - BEGIN plb_v34 - PARAMETER INSTANCE = plb_v34_0 - PARAMETER HW_VER = 1.02.a - END - - BEGIN plb_bram_if_cntlr - PARAMETER INSTANCE = plb_bram_if_cntlr_0 - PARAMETER HW_VER = 1.00.b - PARAMETER C_BASEADDR = 0xFFFF0000 - PARAMETER C_HIGHADDR = 0xFFFFFFFF - BUS_INTERFACE SPLB = plb_v34_0 - END - - BEGIN plb2opb_bridge - PARAMETER INSTANCE = plb2opb_bridge_0 - PARAMETER HW_VER = 1.01.a - PARAMETER C_RNG0_BASEADDR = 0x20000000 - PARAMETER C_RNG0_HIGHADDR = 0x3FFFFFFF - PARAMETER C_RNG1_BASEADDR = 0x60000000 - PARAMETER C_RNG1_HIGHADDR = 0x7FFFFFFF - PARAMETER C_RNG2_BASEADDR = 0x80000000 - PARAMETER C_RNG2_HIGHADDR = 0xBFFFFFFF - PARAMETER C_RNG3_BASEADDR = 0xC0000000 - PARAMETER C_RNG3_HIGHADDR = 0xDFFFFFFF - BUS_INTERFACE SPLB = plb_v34_0 - BUS_INTERFACE MOPB = opb_v20_0 - END - - Gives this device tree (some properties removed for clarity): - - plb@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "xlnx,plb-v34-1.02.a"; - device_type = "ibm,plb"; - ranges; // 1:1 translation - - plb_bram_if_cntrl_0: bram@ffff0000 { - reg = ; - } - - opb@20000000 { - #address-cells = <1>; - #size-cells = <1>; - ranges = <20000000 20000000 20000000 - 60000000 60000000 20000000 - 80000000 80000000 40000000 - c0000000 c0000000 20000000>; - - opb_uart16550_0: serial@a0000000 { - reg = ; - }; - - opb_intc_0: interrupt-controller@d1000fc0 { - reg = ; - }; - }; - }; - - That covers the general approach to binding xilinx IP cores into the - device tree. The following are bindings for specific devices: - - i) Xilinx ML300 Framebuffer - - Simple framebuffer device from the ML300 reference design (also on the - ML403 reference design as well as others). - - Optional properties: - - resolution = : pixel resolution of framebuffer. Some - implementations use a different resolution. - Default is - - virt-resolution = : Size of framebuffer in memory. - Default is . - - rotate-display (empty) : rotate display 180 degrees. - - ii) Xilinx SystemACE - - The Xilinx SystemACE device is used to program FPGAs from an FPGA - bitstream stored on a CF card. It can also be used as a generic CF - interface device. - - Optional properties: - - 8-bit (empty) : Set this property for SystemACE in 8 bit mode - - iii) Xilinx EMAC and Xilinx TEMAC - - Xilinx Ethernet devices. In addition to general xilinx properties - listed above, nodes for these devices should include a phy-handle - property, and may include other common network device properties - like local-mac-address. - - iv) Xilinx Uartlite - - Xilinx uartlite devices are simple fixed speed serial ports. - - Required properties: - - current-speed : Baud rate of uartlite - - v) Xilinx hwicap - - Xilinx hwicap devices provide access to the configuration logic - of the FPGA through the Internal Configuration Access Port - (ICAP). The ICAP enables partial reconfiguration of the FPGA, - readback of the configuration information, and some control over - 'warm boots' of the FPGA fabric. - - Required properties: - - xlnx,family : The family of the FPGA, necessary since the - capabilities of the underlying ICAP hardware - differ between different families. May be - 'virtex2p', 'virtex4', or 'virtex5'. - - vi) Xilinx Uart 16550 - - Xilinx UART 16550 devices are very similar to the NS16550 but with - different register spacing and an offset from the base address. - - Required properties: - - clock-frequency : Frequency of the clock input - - reg-offset : A value of 3 is required - - reg-shift : A value of 2 is required - - vii) Xilinx USB Host controller - - The Xilinx USB host controller is EHCI compatible but with a different - base address for the EHCI registers, and it is always a big-endian - USB Host controller. The hardware can be configured as high speed only, - or high speed/full speed hybrid. - - Required properties: - - xlnx,support-usb-fs: A value 0 means the core is built as high speed - only. A value 1 means the core also supports - full speed devices. - -- cgit v1.2.3-18-g5258 From fdbc5d1b32e195b7775e103abd6263370f11af11 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 28 Jan 2011 16:52:00 +0800 Subject: sound: silent echo'ed messages in Makefile Silent these echo's, please. Signed-off-by: WANG Cong Signed-off-by: Takashi Iwai --- sound/oss/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/oss/Makefile b/sound/oss/Makefile index 96f14dcd0cd..90ffb99c6b1 100644 --- a/sound/oss/Makefile +++ b/sound/oss/Makefile @@ -87,7 +87,7 @@ ifeq ($(CONFIG_PSS_HAVE_BOOT),y) $(obj)/bin2hex pss_synth < $< > $@ else $(obj)/pss_boot.h: - ( \ + $(Q)( \ echo 'static unsigned char * pss_synth = NULL;'; \ echo 'static int pss_synthLen = 0;'; \ ) > $@ @@ -102,7 +102,7 @@ ifeq ($(CONFIG_TRIX_HAVE_BOOT),y) $(obj)/hex2hex -i trix_boot < $< > $@ else $(obj)/trix_boot.h: - ( \ + $(Q)( \ echo 'static unsigned char * trix_boot = NULL;'; \ echo 'static int trix_boot_len = 0;'; \ ) > $@ -- cgit v1.2.3-18-g5258 From f602f6d694a99a0141c066c8f0b360a0b3c16915 Mon Sep 17 00:00:00 2001 From: Stefan Haberland Date: Mon, 31 Jan 2011 11:30:03 +0100 Subject: [S390] dasd: prevent panic with unresumed devices If a device is not resumed correctly the system crashes when this device is set offline. This may happen if it gets disconnected during suspend. Check if the device is already removed from alias handling and skip these steps to prevent the kernel panic. Signed-off-by: Stefan Haberland Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd_alias.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/s390/block/dasd_alias.c b/drivers/s390/block/dasd_alias.c index 4155805dcdf..2b771f18d1a 100644 --- a/drivers/s390/block/dasd_alias.c +++ b/drivers/s390/block/dasd_alias.c @@ -319,6 +319,9 @@ void dasd_alias_disconnect_device_from_lcu(struct dasd_device *device) private = (struct dasd_eckd_private *) device->private; lcu = private->lcu; + /* nothing to do if already disconnected */ + if (!lcu) + return; device->discipline->get_uid(device, &uid); spin_lock_irqsave(&lcu->lock, flags); list_del_init(&device->alias_list); @@ -680,6 +683,9 @@ int dasd_alias_remove_device(struct dasd_device *device) private = (struct dasd_eckd_private *) device->private; lcu = private->lcu; + /* nothing to do if already removed */ + if (!lcu) + return 0; spin_lock_irqsave(&lcu->lock, flags); _remove_device_from_lcu(lcu, device); spin_unlock_irqrestore(&lcu->lock, flags); -- cgit v1.2.3-18-g5258 From f1be77bb21120b5306b56d6854db1f8eb5c3678b Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Mon, 31 Jan 2011 11:30:04 +0100 Subject: [S390] pgtable_list corruption After page_table_free_rcu removed a page from the pgtable_list page_table_free better not add it again. Otherwise a page_table_alloc can reuse a page table fragment that is still in the rcu process. Signed-off-by: Martin Schwidefsky --- arch/s390/mm/pgtable.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c index 0c719c61972..e1850c28cd6 100644 --- a/arch/s390/mm/pgtable.c +++ b/arch/s390/mm/pgtable.c @@ -336,7 +336,8 @@ void page_table_free(struct mm_struct *mm, unsigned long *table) page->flags ^= bits; if (page->flags & FRAG_MASK) { /* Page now has some free pgtable fragments. */ - list_move(&page->lru, &mm->context.pgtable_list); + if (!list_empty(&page->lru)) + list_move(&page->lru, &mm->context.pgtable_list); page = NULL; } else /* All fragments of the 4K page have been freed. */ -- cgit v1.2.3-18-g5258 From e4d82692f4513ccf78de548b8ecea58adf03fa9a Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Mon, 31 Jan 2011 11:30:05 +0100 Subject: [S390] missing sacf in uaccess The uaccess functions copy_in_user_std and clear_user_std fail to switch back from secondary space mode to primary space mode with sacf in case of an unresolvable page fault. We need to make sure that the switch back to primary mode is done in all cases, otherwise the code following the uaccess inline assembly will crash. Reported-by: Alexander Graf Signed-off-by: Martin Schwidefsky --- arch/s390/lib/uaccess_std.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/arch/s390/lib/uaccess_std.c b/arch/s390/lib/uaccess_std.c index 07deaeee14c..a6c4f7ed24a 100644 --- a/arch/s390/lib/uaccess_std.c +++ b/arch/s390/lib/uaccess_std.c @@ -125,9 +125,9 @@ static size_t copy_in_user_std(size_t size, void __user *to, unsigned long tmp1; asm volatile( + " sacf 256\n" " "AHI" %0,-1\n" " jo 5f\n" - " sacf 256\n" " bras %3,3f\n" "0:"AHI" %0,257\n" "1: mvc 0(1,%1),0(%2)\n" @@ -142,9 +142,8 @@ static size_t copy_in_user_std(size_t size, void __user *to, "3:"AHI" %0,-256\n" " jnm 2b\n" "4: ex %0,1b-0b(%3)\n" - " sacf 0\n" "5: "SLR" %0,%0\n" - "6:\n" + "6: sacf 0\n" EX_TABLE(1b,6b) EX_TABLE(2b,0b) EX_TABLE(4b,0b) : "+a" (size), "+a" (to), "+a" (from), "=a" (tmp1) : : "cc", "memory"); @@ -156,9 +155,9 @@ static size_t clear_user_std(size_t size, void __user *to) unsigned long tmp1, tmp2; asm volatile( + " sacf 256\n" " "AHI" %0,-1\n" " jo 5f\n" - " sacf 256\n" " bras %3,3f\n" " xc 0(1,%1),0(%1)\n" "0:"AHI" %0,257\n" @@ -178,9 +177,8 @@ static size_t clear_user_std(size_t size, void __user *to) "3:"AHI" %0,-256\n" " jnm 2b\n" "4: ex %0,0(%3)\n" - " sacf 0\n" "5: "SLR" %0,%0\n" - "6:\n" + "6: sacf 0\n" EX_TABLE(1b,6b) EX_TABLE(2b,0b) EX_TABLE(4b,0b) : "+a" (size), "+a" (to), "=a" (tmp1), "=a" (tmp2) : : "cc", "memory"); -- cgit v1.2.3-18-g5258 From c84ca00819e8a441d79c61883a275d8982f04cb2 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 31 Jan 2011 11:30:06 +0100 Subject: [S390] tlb: fix build error caused by THP Fix this build error with !CONFIG_SWAP caused by tranparent huge pages support: In file included from mm/pgtable-generic.c:9:0: /linux-2.6/arch/s390/include/asm/tlb.h: In function 'tlb_remove_page': /linux-2.6/arch/s390/include/asm/tlb.h:92:2: error: implicit declaration of function 'page_cache_release' Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/tlb.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/s390/include/asm/tlb.h b/arch/s390/include/asm/tlb.h index f1f644f2240..9074a54c4d1 100644 --- a/arch/s390/include/asm/tlb.h +++ b/arch/s390/include/asm/tlb.h @@ -22,6 +22,7 @@ */ #include +#include #include #include #include -- cgit v1.2.3-18-g5258 From 786cca889264836fad841757a1bf1bbaa7a16010 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Mon, 31 Jan 2011 11:30:07 +0100 Subject: [S390] use asm-generic/cacheflush.h The implementation of the cache flushing interfaces on the s390 is identical with the default implementation in asm-generic. Signed-off-by: Akinobu Mita Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/cacheflush.h | 23 +---------------------- 1 file changed, 1 insertion(+), 22 deletions(-) diff --git a/arch/s390/include/asm/cacheflush.h b/arch/s390/include/asm/cacheflush.h index 405cc97c624..7e1f7762062 100644 --- a/arch/s390/include/asm/cacheflush.h +++ b/arch/s390/include/asm/cacheflush.h @@ -1,29 +1,8 @@ #ifndef _S390_CACHEFLUSH_H #define _S390_CACHEFLUSH_H -/* Keep includes the same across arches. */ -#include - /* Caches aren't brain-dead on the s390. */ -#define flush_cache_all() do { } while (0) -#define flush_cache_mm(mm) do { } while (0) -#define flush_cache_dup_mm(mm) do { } while (0) -#define flush_cache_range(vma, start, end) do { } while (0) -#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) -#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0 -#define flush_dcache_page(page) do { } while (0) -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) -#define flush_icache_range(start, end) do { } while (0) -#define flush_icache_page(vma,pg) do { } while (0) -#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) -#define flush_cache_vmap(start, end) do { } while (0) -#define flush_cache_vunmap(start, end) do { } while (0) - -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ - memcpy(dst, src, len) -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - memcpy(dst, src, len) +#include #ifdef CONFIG_DEBUG_PAGEALLOC void kernel_map_pages(struct page *page, int numpages, int enable); -- cgit v1.2.3-18-g5258 From 6fa1098ac1bc2ad19627a08ae654caf360bc85aa Mon Sep 17 00:00:00 2001 From: Jan Glauber Date: Mon, 31 Jan 2011 11:30:08 +0100 Subject: [S390] qdio: prevent compile warning under CONFIG_32BIT MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Prevent the following compiler warning if compiling a 31 bit kernel: drivers/s390/cio/qdio_main.c: In function ‘get_outbound_buffer_frontier’: drivers/s390/cio/qdio_main.c:646:16: warning: ‘state’ may be used uninitialized in this function CC lib/radix-tree.o CC drivers/s390/scsi/zfcp_cfdc.o drivers/s390/cio/qdio_main.c: In function ‘qdio_inbound_q_moved’: drivers/s390/cio/qdio_main.c:479:16: warning: ‘state’ may be used uninitialized in this function drivers/s390/cio/qdio_main.c:479:16: note: ‘state’ was declared here Signed-off-by: Jan Glauber Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/qdio_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c index e9fff2b9bce..5640c89cd9d 100644 --- a/drivers/s390/cio/qdio_main.c +++ b/drivers/s390/cio/qdio_main.c @@ -476,7 +476,7 @@ static inline void inbound_primed(struct qdio_q *q, int count) static int get_inbound_buffer_frontier(struct qdio_q *q) { int count, stop; - unsigned char state; + unsigned char state = 0; /* * Don't check 128 buffers, as otherwise qdio_inbound_q_moved @@ -643,7 +643,7 @@ void qdio_inbound_processing(unsigned long data) static int get_outbound_buffer_frontier(struct qdio_q *q) { int count, stop; - unsigned char state; + unsigned char state = 0; if (need_siga_sync(q)) if (((queue_type(q) != QDIO_IQDIO_QFMT) && -- cgit v1.2.3-18-g5258 From d9c11b1e8aade25d7d75fb8f344e68e1301822e4 Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Mon, 31 Jan 2011 11:30:09 +0100 Subject: [S390] reset default for CONFIG_CHSC_SCH 6f9a3c33 "[S390] cleanup s390 Kconfig" accidentally changed the default for CONFIG_CHSC_SCH. Reset it to m. Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky --- arch/s390/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index ff19efdf6fe..636bcb81d06 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -406,7 +406,7 @@ config QDIO If unsure, say Y. config CHSC_SCH - def_tristate y + def_tristate m prompt "Support for CHSC subchannels" help This driver allows usage of CHSC subchannels. A CHSC subchannel -- cgit v1.2.3-18-g5258 From ccff9b51825b7335889b780bdf7de84ca803e291 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 30 Jan 2011 21:03:50 +0000 Subject: ARM: mmci: complete the transaction on error When we encounter an error, make sure we complete the transaction otherwise we'll leave the request dangling. Acked-by: Linus Walleij Signed-off-by: Russell King --- drivers/mmc/host/mmci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index b6fd6dcb41e..175a623a6a2 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -319,7 +319,7 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data, if (status & MCI_DATABLOCKEND) dev_err(mmc_dev(host->mmc), "stray MCI_DATABLOCKEND interrupt\n"); - if (status & MCI_DATAEND) { + if (status & MCI_DATAEND || data->error) { mmci_stop_data(host); if (!data->error) -- cgit v1.2.3-18-g5258 From 613b152c63e35095a929f9bb80441cbe91ff5e80 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 30 Jan 2011 21:06:53 +0000 Subject: ARM: mmci: round down the bytes transferred on error We should not report incomplete blocks on error. Return the number of bytes successfully transferred, rounded down to the nearest block. Acked-by: Linus Walleij Signed-off-by: Russell King --- drivers/mmc/host/mmci.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 175a623a6a2..2d6de3e03e2 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -289,13 +290,13 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data, dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ (status %08x)\n", status); if (status & MCI_DATACRCFAIL) { /* Last block was not successful */ - host->data_xfered = ((success - 1) / data->blksz) * data->blksz; + host->data_xfered = round_down(success - 1, data->blksz); data->error = -EILSEQ; } else if (status & MCI_DATATIMEOUT) { - host->data_xfered = success; + host->data_xfered = round_down(success, data->blksz); data->error = -ETIMEDOUT; } else if (status & (MCI_TXUNDERRUN|MCI_RXOVERRUN)) { - host->data_xfered = success; + host->data_xfered = round_down(success, data->blksz); data->error = -EIO; } -- cgit v1.2.3-18-g5258 From 5f2c1b30c7f60670c8b9d1cb1ea7c818b9c743a6 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 28 Jan 2011 20:57:57 +0000 Subject: ARM: footbridge: fix debug macros 0ea1293 (arm: return both physical and virtual addresses from addruart) changed the way the 'addruart' worked, making it return both the virt and phys addresses. Unfortunately, for footbridge, these were reversed. Fix that. Tested on Netwinder. Signed-off-by: Russell King --- arch/arm/mach-footbridge/include/mach/debug-macro.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S index 3c9e0c40c67..30b971d6581 100644 --- a/arch/arm/mach-footbridge/include/mach/debug-macro.S +++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S @@ -17,8 +17,8 @@ /* For NetWinder debugging */ .macro addruart, rp, rv mov \rp, #0x000003f8 - orr \rv, \rp, #0x7c000000 @ physical - orr \rp, \rp, #0xff000000 @ virtual + orr \rv, \rp, #0xff000000 @ virtual + orr \rp, \rp, #0x7c000000 @ physical .endm #define UART_SHIFT 0 -- cgit v1.2.3-18-g5258 From b0a2679d27408d97ce31e5f800b44227d3388b84 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 30 Jan 2011 11:21:05 +0000 Subject: ARM: initrd: disable initrd if passed address overlaps reserved region Disable the initrd if the passed address already overlaps the reserved region. This avoids oopses on Netwinders when NeTTrom tells the kernel that an initrd is located at mem+4MB, but this overlaps the BSS, resulting in the kernels in-use BSS being freed. This should be applied to v2.6.37-stable. Cc: Signed-off-by: Russell King --- arch/arm/mm/init.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 5164069ced4..cddd684364d 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -297,6 +297,12 @@ void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc) memblock_reserve(__pa(_stext), _end - _stext); #endif #ifdef CONFIG_BLK_DEV_INITRD + if (phys_initrd_size && + memblock_is_region_reserved(phys_initrd_start, phys_initrd_size)) { + pr_err("INITRD: 0x%08lx+0x%08lx overlaps in-use memory region - disabling initrd\n", + phys_initrd_start, phys_initrd_size); + phys_initrd_start = phys_initrd_size = 0; + } if (phys_initrd_size) { memblock_reserve(phys_initrd_start, phys_initrd_size); -- cgit v1.2.3-18-g5258 From c1928022ef94662a88329e35fa0968b1be328b8e Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 30 Jan 2011 11:29:40 +0000 Subject: ARM: io: ensure inb/outb() et.al. are properly ordered on ARMv6+ Ensure that the ISA/PCI IO space accessors are properly ordered on ARMv6+ architectures. These should always be ordered with respect to all other accesses. This also fixes __iormb() and __iowmb() not being visible to ioread/ iowrite if a platform defines its own MMIO accessors. Signed-off-by: Russell King --- arch/arm/include/asm/io.h | 33 +++++++++++++++++---------------- 1 file changed, 17 insertions(+), 16 deletions(-) diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 20e0f7c9e03..d66605dea55 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -95,6 +95,15 @@ static inline void __iomem *__typesafe_io(unsigned long addr) return (void __iomem *)addr; } +/* IO barriers */ +#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE +#define __iormb() rmb() +#define __iowmb() wmb() +#else +#define __iormb() do { } while (0) +#define __iowmb() do { } while (0) +#endif + /* * Now, pick up the machine-defined IO definitions */ @@ -125,17 +134,17 @@ static inline void __iomem *__typesafe_io(unsigned long addr) * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space. */ #ifdef __io -#define outb(v,p) __raw_writeb(v,__io(p)) -#define outw(v,p) __raw_writew((__force __u16) \ - cpu_to_le16(v),__io(p)) -#define outl(v,p) __raw_writel((__force __u32) \ - cpu_to_le32(v),__io(p)) +#define outb(v,p) ({ __iowmb(); __raw_writeb(v,__io(p)); }) +#define outw(v,p) ({ __iowmb(); __raw_writew((__force __u16) \ + cpu_to_le16(v),__io(p)); }) +#define outl(v,p) ({ __iowmb(); __raw_writel((__force __u32) \ + cpu_to_le32(v),__io(p)); }) -#define inb(p) ({ __u8 __v = __raw_readb(__io(p)); __v; }) +#define inb(p) ({ __u8 __v = __raw_readb(__io(p)); __iormb(); __v; }) #define inw(p) ({ __u16 __v = le16_to_cpu((__force __le16) \ - __raw_readw(__io(p))); __v; }) + __raw_readw(__io(p))); __iormb(); __v; }) #define inl(p) ({ __u32 __v = le32_to_cpu((__force __le32) \ - __raw_readl(__io(p))); __v; }) + __raw_readl(__io(p))); __iormb(); __v; }) #define outsb(p,d,l) __raw_writesb(__io(p),d,l) #define outsw(p,d,l) __raw_writesw(__io(p),d,l) @@ -192,14 +201,6 @@ extern void _memset_io(volatile void __iomem *, int, size_t); #define writel_relaxed(v,c) ((void)__raw_writel((__force u32) \ cpu_to_le32(v),__mem_pci(c))) -#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE -#define __iormb() rmb() -#define __iowmb() wmb() -#else -#define __iormb() do { } while (0) -#define __iowmb() do { } while (0) -#endif - #define readb(c) ({ u8 __v = readb_relaxed(c); __iormb(); __v; }) #define readw(c) ({ u16 __v = readw_relaxed(c); __iormb(); __v; }) #define readl(c) ({ u32 __v = readl_relaxed(c); __iormb(); __v; }) -- cgit v1.2.3-18-g5258 From efbeb0718126d277c9d7e902eec8da956acf4bd6 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 31 Jan 2011 11:47:52 +0100 Subject: ALSA: oxygen: fix output routing on Xonar DG This card uses separate I2S outputs for the front speakers and headphones, and reverses the order of the three speaker outputs. To work around this, add a model-specific callback to adjust the controller's playback routing. Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai --- sound/pci/oxygen/oxygen.h | 2 ++ sound/pci/oxygen/oxygen_mixer.c | 2 ++ sound/pci/oxygen/xonar_dg.c | 36 ++++++++++++++++++++++++++++++++++++ 3 files changed, 40 insertions(+) diff --git a/sound/pci/oxygen/oxygen.h b/sound/pci/oxygen/oxygen.h index c2ae63d17cd..f53897a708b 100644 --- a/sound/pci/oxygen/oxygen.h +++ b/sound/pci/oxygen/oxygen.h @@ -92,6 +92,8 @@ struct oxygen_model { void (*update_dac_volume)(struct oxygen *chip); void (*update_dac_mute)(struct oxygen *chip); void (*update_center_lfe_mix)(struct oxygen *chip, bool mixed); + unsigned int (*adjust_dac_routing)(struct oxygen *chip, + unsigned int play_routing); void (*gpio_changed)(struct oxygen *chip); void (*uart_input)(struct oxygen *chip); void (*ac97_switch)(struct oxygen *chip, diff --git a/sound/pci/oxygen/oxygen_mixer.c b/sound/pci/oxygen/oxygen_mixer.c index 9bff14d5895..26c7e8bcb22 100644 --- a/sound/pci/oxygen/oxygen_mixer.c +++ b/sound/pci/oxygen/oxygen_mixer.c @@ -180,6 +180,8 @@ void oxygen_update_dac_routing(struct oxygen *chip) (1 << OXYGEN_PLAY_DAC1_SOURCE_SHIFT) | (2 << OXYGEN_PLAY_DAC2_SOURCE_SHIFT) | (3 << OXYGEN_PLAY_DAC3_SOURCE_SHIFT); + if (chip->model.adjust_dac_routing) + reg_value = chip->model.adjust_dac_routing(chip, reg_value); oxygen_write16_masked(chip, OXYGEN_PLAY_ROUTING, reg_value, OXYGEN_PLAY_DAC0_SOURCE_MASK | OXYGEN_PLAY_DAC1_SOURCE_MASK | diff --git a/sound/pci/oxygen/xonar_dg.c b/sound/pci/oxygen/xonar_dg.c index e1fa602eba7..bc6eb58be38 100644 --- a/sound/pci/oxygen/xonar_dg.c +++ b/sound/pci/oxygen/xonar_dg.c @@ -24,6 +24,11 @@ * * SPI 0 -> CS4245 * + * I²S 1 -> CS4245 + * I²S 2 -> CS4361 (center/LFE) + * I²S 3 -> CS4361 (surround) + * I²S 4 -> CS4361 (front) + * * GPIO 3 <- ? * GPIO 4 <- headphone detect * GPIO 5 -> route input jack to line-in (0) or mic-in (1) @@ -36,6 +41,7 @@ * input 1 <- aux * input 2 <- front mic * input 4 <- line/mic + * DAC out -> headphones * aux out -> front panel headphones */ @@ -207,6 +213,35 @@ static void set_cs4245_adc_params(struct oxygen *chip, cs4245_write_cached(chip, CS4245_ADC_CTRL, value); } +static inline unsigned int shift_bits(unsigned int value, + unsigned int shift_from, + unsigned int shift_to, + unsigned int mask) +{ + if (shift_from < shift_to) + return (value << (shift_to - shift_from)) & mask; + else + return (value >> (shift_from - shift_to)) & mask; +} + +static unsigned int adjust_dg_dac_routing(struct oxygen *chip, + unsigned int play_routing) +{ + return (play_routing & OXYGEN_PLAY_DAC0_SOURCE_MASK) | + shift_bits(play_routing, + OXYGEN_PLAY_DAC2_SOURCE_SHIFT, + OXYGEN_PLAY_DAC1_SOURCE_SHIFT, + OXYGEN_PLAY_DAC1_SOURCE_MASK) | + shift_bits(play_routing, + OXYGEN_PLAY_DAC1_SOURCE_SHIFT, + OXYGEN_PLAY_DAC2_SOURCE_SHIFT, + OXYGEN_PLAY_DAC2_SOURCE_MASK) | + shift_bits(play_routing, + OXYGEN_PLAY_DAC0_SOURCE_SHIFT, + OXYGEN_PLAY_DAC3_SOURCE_SHIFT, + OXYGEN_PLAY_DAC3_SOURCE_MASK); +} + static int output_switch_info(struct snd_kcontrol *ctl, struct snd_ctl_elem_info *info) { @@ -557,6 +592,7 @@ struct oxygen_model model_xonar_dg = { .resume = dg_resume, .set_dac_params = set_cs4245_dac_params, .set_adc_params = set_cs4245_adc_params, + .adjust_dac_routing = adjust_dg_dac_routing, .dump_registers = dump_cs4245_registers, .model_data_size = sizeof(struct dg), .device_config = PLAYBACK_0_TO_I2S | -- cgit v1.2.3-18-g5258 From b9b3f82f94b52ebb0bbdf6cd77ccc5e8ee3f53b5 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 12 Jan 2011 12:12:31 +0100 Subject: dmaengine i.MX sdma: set maximum segment size for our device Signed-off-by: Sascha Hauer --- drivers/dma/imx-sdma.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index d5a5d4d9c19..c50305043f1 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -301,6 +301,7 @@ struct sdma_firmware_header { struct sdma_engine { struct device *dev; + struct device_dma_parameters dma_parms; struct sdma_channel channel[MAX_DMA_CHANNELS]; struct sdma_channel_control *channel_control; void __iomem *regs; @@ -1317,6 +1318,8 @@ static int __init sdma_probe(struct platform_device *pdev) sdma->dma_device.device_prep_dma_cyclic = sdma_prep_dma_cyclic; sdma->dma_device.device_control = sdma_control; sdma->dma_device.device_issue_pending = sdma_issue_pending; + sdma->dma_device.dev->dma_parms = &sdma->dma_parms; + dma_set_max_seg_size(sdma->dma_device.dev, 65535); ret = dma_async_device_register(&sdma->dma_device); if (ret) { -- cgit v1.2.3-18-g5258 From 1fa81c270da4d8dffa84fcca448654a10ed0a5dc Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 12 Jan 2011 13:02:28 +0100 Subject: dmaengine i.MX sdma: check sg entries for valid addresses and lengths This patch lets sdma_prep_slave_sg fail if the entries of an sg list do not start on multiples of the word size or if the lengths are not multiple of the word size. Also, catch the previously unhandled DMA_SLAVE_BUSWIDTH_8_BYTES and DMA_SLAVE_BUSWIDTH_UNDEFINED cases. Signed-off-by: Sascha Hauer --- drivers/dma/imx-sdma.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index c50305043f1..8707723e36d 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -925,10 +925,24 @@ static struct dma_async_tx_descriptor *sdma_prep_slave_sg( ret = -EINVAL; goto err_out; } - if (sdmac->word_size == DMA_SLAVE_BUSWIDTH_4_BYTES) + + switch (sdmac->word_size) { + case DMA_SLAVE_BUSWIDTH_4_BYTES: bd->mode.command = 0; - else - bd->mode.command = sdmac->word_size; + if (count & 3 || sg->dma_address & 3) + return NULL; + break; + case DMA_SLAVE_BUSWIDTH_2_BYTES: + bd->mode.command = 2; + if (count & 1 || sg->dma_address & 1) + return NULL; + break; + case DMA_SLAVE_BUSWIDTH_1_BYTE: + bd->mode.command = 1; + break; + default: + return NULL; + } param = BD_DONE | BD_EXTD | BD_CONT; -- cgit v1.2.3-18-g5258 From 7a0e9b2557902bdca563a5eb1bbac87560bd7d20 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 31 Jan 2011 10:19:53 +0100 Subject: dmaengine i.MX SDMA: do not initialize chan_id field This is bogus as the dmaengine core will overwrite this field. Signed-off-by: Sascha Hauer --- drivers/dma/imx-sdma.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index 8707723e36d..3e848ee9a18 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -1307,7 +1307,6 @@ static int __init sdma_probe(struct platform_device *pdev) dma_cap_set(DMA_CYCLIC, sdma->dma_device.cap_mask); sdmac->chan.device = &sdma->dma_device; - sdmac->chan.chan_id = i; sdmac->channel = i; /* Add the channel to the DMAC list */ -- cgit v1.2.3-18-g5258 From 7214a8b14f63a1603401124bc150e17b145aa476 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 31 Jan 2011 10:21:35 +0100 Subject: dmaengine i.MX SDMA: initialize dma capabilities outside channel loop The capabilities are device specific fields, not channel specific fields. Signed-off-by: Sascha Hauer --- drivers/dma/imx-sdma.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index 3e848ee9a18..eb250681804 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -1295,6 +1295,9 @@ static int __init sdma_probe(struct platform_device *pdev) sdma->version = pdata->sdma_version; + dma_cap_set(DMA_SLAVE, sdma->dma_device.cap_mask); + dma_cap_set(DMA_CYCLIC, sdma->dma_device.cap_mask); + INIT_LIST_HEAD(&sdma->dma_device.channels); /* Initialize channel parameters */ for (i = 0; i < MAX_DMA_CHANNELS; i++) { @@ -1303,9 +1306,6 @@ static int __init sdma_probe(struct platform_device *pdev) sdmac->sdma = sdma; spin_lock_init(&sdmac->lock); - dma_cap_set(DMA_SLAVE, sdma->dma_device.cap_mask); - dma_cap_set(DMA_CYCLIC, sdma->dma_device.cap_mask); - sdmac->chan.device = &sdma->dma_device; sdmac->channel = i; -- cgit v1.2.3-18-g5258 From 23889c6352ab4a842a30221bb412ff49954b2fb3 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 31 Jan 2011 10:56:58 +0100 Subject: dmaengine i.MX SDMA: reserve channel 0 by not registering it We need channel 0 of the sdma engine for internal purposes. We accomplished this by calling dma_request_channel() in the probe function. This does not work when multiple dma engines are present which is the case when IPU support for i.MX31/35 is compiled in. So instead of registering channel 0 and reserving it afterwards simply do not register it in the first place. With this the dmaengine channel counting does not match sdma channel counting anymore, so we have to use sdma channel counting in the driver. Signed-off-by: Sascha Hauer --- drivers/dma/imx-sdma.c | 30 ++++++++++++------------------ 1 file changed, 12 insertions(+), 18 deletions(-) diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index eb250681804..1eb3f007740 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -230,7 +230,7 @@ struct sdma_engine; * struct sdma_channel - housekeeping for a SDMA channel * * @sdma pointer to the SDMA engine for this channel - * @channel the channel number, matches dmaengine chan_id + * @channel the channel number, matches dmaengine chan_id + 1 * @direction transfer type. Needed for setting SDMA script * @peripheral_type Peripheral type. Needed for setting SDMA script * @event_id0 aka dma request line @@ -799,7 +799,7 @@ static dma_cookie_t sdma_tx_submit(struct dma_async_tx_descriptor *tx) cookie = sdma_assign_cookie(sdmac); - sdma_enable_channel(sdma, tx->chan->chan_id); + sdma_enable_channel(sdma, sdmac->channel); spin_unlock_irq(&sdmac->lock); @@ -812,10 +812,6 @@ static int sdma_alloc_chan_resources(struct dma_chan *chan) struct imx_dma_data *data = chan->private; int prio, ret; - /* No need to execute this for internal channel 0 */ - if (chan->chan_id == 0) - return 0; - if (!data) return -EINVAL; @@ -880,7 +876,7 @@ static struct dma_async_tx_descriptor *sdma_prep_slave_sg( struct sdma_channel *sdmac = to_sdma_chan(chan); struct sdma_engine *sdma = sdmac->sdma; int ret, i, count; - int channel = chan->chan_id; + int channel = sdmac->channel; struct scatterlist *sg; if (sdmac->status == DMA_IN_PROGRESS) @@ -978,7 +974,7 @@ static struct dma_async_tx_descriptor *sdma_prep_dma_cyclic( struct sdma_channel *sdmac = to_sdma_chan(chan); struct sdma_engine *sdma = sdmac->sdma; int num_periods = buf_len / period_len; - int channel = chan->chan_id; + int channel = sdmac->channel; int ret, i = 0, buf = 0; dev_dbg(sdma->dev, "%s channel: %d\n", __func__, channel); @@ -1252,7 +1248,6 @@ static int __init sdma_probe(struct platform_device *pdev) struct resource *iores; struct sdma_platform_data *pdata = pdev->dev.platform_data; int i; - dma_cap_mask_t mask; struct sdma_engine *sdma; sdma = kzalloc(sizeof(*sdma), GFP_KERNEL); @@ -1309,8 +1304,14 @@ static int __init sdma_probe(struct platform_device *pdev) sdmac->chan.device = &sdma->dma_device; sdmac->channel = i; - /* Add the channel to the DMAC list */ - list_add_tail(&sdmac->chan.device_node, &sdma->dma_device.channels); + /* + * Add the channel to the DMAC list. Do not add channel 0 though + * because we need it internally in the SDMA driver. This also means + * that channel 0 in dmaengine counting matches sdma channel 1. + */ + if (i) + list_add_tail(&sdmac->chan.device_node, + &sdma->dma_device.channels); } ret = sdma_init(sdma); @@ -1340,13 +1341,6 @@ static int __init sdma_probe(struct platform_device *pdev) goto err_init; } - /* request channel 0. This is an internal control channel - * to the SDMA engine and not available to clients. - */ - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - dma_request_channel(mask, NULL, NULL); - dev_info(sdma->dev, "initialized\n"); return 0; -- cgit v1.2.3-18-g5258 From 1e070a60997f5bbaadd498c34380e2aa110336cf Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 12 Jan 2011 13:14:37 +0100 Subject: dmaengine i.MX dma: set maximum segment size for our device Signed-off-by: Sascha Hauer --- drivers/dma/imx-dma.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c index e53d438142b..a46e1d9fa3e 100644 --- a/drivers/dma/imx-dma.c +++ b/drivers/dma/imx-dma.c @@ -49,6 +49,7 @@ struct imxdma_channel { struct imxdma_engine { struct device *dev; + struct device_dma_parameters dma_parms; struct dma_device dma_device; struct imxdma_channel channel[MAX_DMA_CHANNELS]; }; @@ -370,6 +371,9 @@ static int __init imxdma_probe(struct platform_device *pdev) platform_set_drvdata(pdev, imxdma); + imxdma->dma_device.dev->dma_parms = &imxdma->dma_parms; + dma_set_max_seg_size(imxdma->dma_device.dev, 0xffffff); + ret = dma_async_device_register(&imxdma->dma_device); if (ret) { dev_err(&pdev->dev, "unable to register\n"); -- cgit v1.2.3-18-g5258 From d07102a1bb0e759ce4571df30c62998ef5d8a8d3 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 12 Jan 2011 14:13:23 +0100 Subject: dmaengine i.MX dma: check sg entries for valid addresses and lengths Signed-off-by: Sascha Hauer --- drivers/dma/imx-dma.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c index a46e1d9fa3e..a1eac99a5fa 100644 --- a/drivers/dma/imx-dma.c +++ b/drivers/dma/imx-dma.c @@ -243,6 +243,21 @@ static struct dma_async_tx_descriptor *imxdma_prep_slave_sg( else dmamode = DMA_MODE_WRITE; + switch (imxdmac->word_size) { + case DMA_SLAVE_BUSWIDTH_4_BYTES: + if (sgl->length & 3 || sgl->dma_address & 3) + return NULL; + break; + case DMA_SLAVE_BUSWIDTH_2_BYTES: + if (sgl->length & 1 || sgl->dma_address & 1) + return NULL; + break; + case DMA_SLAVE_BUSWIDTH_1_BYTE: + break; + default: + return NULL; + } + ret = imx_dma_setup_sg(imxdmac->imxdma_channel, sgl, sg_len, dma_length, imxdmac->per_address, dmamode); if (ret) -- cgit v1.2.3-18-g5258 From 97a43dfe84119528ec2576129b91d619219ab716 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 31 Jan 2011 11:35:44 +0100 Subject: dmaengine i.MX DMA: do not initialize chan_id field Signed-off-by: Sascha Hauer --- drivers/dma/imx-dma.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c index a1eac99a5fa..82627087b55 100644 --- a/drivers/dma/imx-dma.c +++ b/drivers/dma/imx-dma.c @@ -366,7 +366,6 @@ static int __init imxdma_probe(struct platform_device *pdev) dma_cap_set(DMA_CYCLIC, imxdma->dma_device.cap_mask); imxdmac->chan.device = &imxdma->dma_device; - imxdmac->chan.chan_id = i; imxdmac->channel = i; /* Add the channel to the DMAC list */ -- cgit v1.2.3-18-g5258 From f8a356ff96a9070156f863e4f7716e2a0eb8c995 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 31 Jan 2011 11:35:59 +0100 Subject: dmaengine i.MX dma: initialize dma capabilities outside channel loop The capabilities are device specific fields, not channel specific fields. Signed-off-by: Sascha Hauer --- drivers/dma/imx-dma.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c index 82627087b55..e18eaabe92b 100644 --- a/drivers/dma/imx-dma.c +++ b/drivers/dma/imx-dma.c @@ -345,6 +345,9 @@ static int __init imxdma_probe(struct platform_device *pdev) INIT_LIST_HEAD(&imxdma->dma_device.channels); + dma_cap_set(DMA_SLAVE, imxdma->dma_device.cap_mask); + dma_cap_set(DMA_CYCLIC, imxdma->dma_device.cap_mask); + /* Initialize channel parameters */ for (i = 0; i < MAX_DMA_CHANNELS; i++) { struct imxdma_channel *imxdmac = &imxdma->channel[i]; @@ -362,9 +365,6 @@ static int __init imxdma_probe(struct platform_device *pdev) imxdmac->imxdma = imxdma; spin_lock_init(&imxdmac->lock); - dma_cap_set(DMA_SLAVE, imxdma->dma_device.cap_mask); - dma_cap_set(DMA_CYCLIC, imxdma->dma_device.cap_mask); - imxdmac->chan.device = &imxdma->dma_device; imxdmac->channel = i; -- cgit v1.2.3-18-g5258 From 1797c33f0edcdcc9a483c06233a203786666a97f Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 20 Jan 2011 05:50:35 +0800 Subject: dmaengine: imx-sdma: remove IMX_DMA_SG_LOOP handling in sdma_prep_slave_sg() This is a leftover from the time that the driver did not have sdma_prep_dma_cyclic callback and implemented sound dma as a looped sg chain. And it can be removed now. Signed-off-by: Shawn Guo Signed-off-by: Sascha Hauer --- drivers/dma/imx-sdma.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index d5a5d4d9c19..cf8cc0b8e7f 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -931,12 +931,6 @@ static struct dma_async_tx_descriptor *sdma_prep_slave_sg( param = BD_DONE | BD_EXTD | BD_CONT; - if (sdmac->flags & IMX_DMA_SG_LOOP) { - param |= BD_INTR; - if (i + 1 == sg_len) - param |= BD_WRAP; - } - if (i + 1 == sg_len) param |= BD_INTR; -- cgit v1.2.3-18-g5258 From 4b2ce9ddb370c4eb573540611c347d78ac4b54a0 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 20 Jan 2011 05:50:36 +0800 Subject: dmaengine: imx-sdma: set sdmac->status to DMA_ERROR in err_out of sdma_prep_slave_sg() sdma_prep_dma_cyclic() sets sdmac->status to DMA_ERROR in err_out, and sdma_prep_slave_sg() needs to do the same. Otherwise, sdmac->status stays at DMA_IN_PROGRESS, which will make the function return immediately next time it gets called. Signed-off-by: Shawn Guo Signed-off-by: Sascha Hauer --- drivers/dma/imx-sdma.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index cf8cc0b8e7f..6fc04d85be6 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -947,6 +947,7 @@ static struct dma_async_tx_descriptor *sdma_prep_slave_sg( return &sdmac->desc; err_out: + sdmac->status = DMA_ERROR; return NULL; } -- cgit v1.2.3-18-g5258 From 8a9659114c7be6f88253618252881ea6fe0588b4 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 20 Jan 2011 05:50:37 +0800 Subject: dmaengine: imx-sdma: return sdmac->status in sdma_tx_status() The sdmac->status was designed to reflect the status of the tx, so simply return it in sdma_tx_status(). Then dma client can call dma_async_is_tx_complete() to know the status of the tx. Signed-off-by: Shawn Guo Signed-off-by: Sascha Hauer --- drivers/dma/imx-sdma.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index 6fc04d85be6..f331ae0f7ec 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -1061,14 +1061,12 @@ static enum dma_status sdma_tx_status(struct dma_chan *chan, { struct sdma_channel *sdmac = to_sdma_chan(chan); dma_cookie_t last_used; - enum dma_status ret; last_used = chan->cookie; - ret = dma_async_is_complete(cookie, sdmac->last_completed, last_used); dma_set_tx_state(txstate, sdmac->last_completed, last_used, 0); - return ret; + return sdmac->status; } static void sdma_issue_pending(struct dma_chan *chan) -- cgit v1.2.3-18-g5258 From 1e9cebb42de57f1243261939c77ab5b0f9bcf311 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 20 Jan 2011 05:50:38 +0800 Subject: dmaengine: imx-sdma: correct sdmac->status in sdma_handle_channel_loop() sdma_handle_channel_loop() is the handler of cyclic tx. One period success does not really mean the success of the tx. Instead of DMA_SUCCESS, DMA_IN_PROGRESS should be the one to tell. Signed-off-by: Shawn Guo Signed-off-by: Sascha Hauer --- drivers/dma/imx-sdma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index f331ae0f7ec..cf93d1737f1 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -449,7 +449,7 @@ static void sdma_handle_channel_loop(struct sdma_channel *sdmac) if (bd->mode.status & BD_RROR) sdmac->status = DMA_ERROR; else - sdmac->status = DMA_SUCCESS; + sdmac->status = DMA_IN_PROGRESS; bd->mode.status |= BD_DONE; sdmac->buf_tail++; -- cgit v1.2.3-18-g5258 From 341b9419a8c0a4cdb75773c576870f1eb655516d Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 20 Jan 2011 05:50:39 +0800 Subject: dmaengine: imx-sdma: fix up param for the last BD in sdma_prep_slave_sg() As per the reference manual, bit "L" should be set while bit "C" should be cleared for the last buffer descriptor in the non-cyclic chain, so that sdma can stop trying to find the next BD and end the transfer. In case of sdma_prep_slave_sg(), BD_LAST needs to be set and BD_CONT be cleared for the last BD. Signed-off-by: Shawn Guo Signed-off-by: Sascha Hauer --- drivers/dma/imx-sdma.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index cf93d1737f1..4535f98b355 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -931,8 +931,11 @@ static struct dma_async_tx_descriptor *sdma_prep_slave_sg( param = BD_DONE | BD_EXTD | BD_CONT; - if (i + 1 == sg_len) + if (i + 1 == sg_len) { param |= BD_INTR; + param |= BD_LAST; + param &= ~BD_CONT; + } dev_dbg(sdma->dev, "entry %d: count: %d dma: 0x%08x %s%s\n", i, count, sg->dma_address, -- cgit v1.2.3-18-g5258 From 4135038a582c20ffdadfcf6564852e0b72a20968 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Fri, 28 Jan 2011 11:00:31 -0500 Subject: watchdog: Fix broken nowatchdog logic Passing nowatchdog to kernel disables 2 things: creation of watchdog threads AND initialization of percpu watchdog_hrtimer. As hrtimers are initialized only at boot it's not possible to enable watchdog later - for me all watchdog threads started to eat 100% of CPU time, but they could just crash. Additionally, even if these threads would start properly, watchdog_disable_all_cpus was guarded by no_watchdog check, so you couldn't disable watchdog. To fix this, remove no_watchdog variable and use already existing watchdog_enabled variable. Signed-off-by: Marcin Slusarz [ removed another no_watchdog instance ] Signed-off-by: Don Zickus Cc: Stephane Eranian Cc: Peter Zijlstra Cc: Frederic Weisbecker Cc: LKML-Reference: <1296230433-6261-1-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar --- kernel/watchdog.c | 20 ++++++-------------- 1 file changed, 6 insertions(+), 14 deletions(-) diff --git a/kernel/watchdog.c b/kernel/watchdog.c index d7ebdf4cea9..d9961ea1c3f 100644 --- a/kernel/watchdog.c +++ b/kernel/watchdog.c @@ -27,7 +27,7 @@ #include #include -int watchdog_enabled; +int watchdog_enabled = 1; int __read_mostly softlockup_thresh = 60; static DEFINE_PER_CPU(unsigned long, watchdog_touch_ts); @@ -43,9 +43,6 @@ static DEFINE_PER_CPU(unsigned long, hrtimer_interrupts_saved); static DEFINE_PER_CPU(struct perf_event *, watchdog_ev); #endif -static int no_watchdog; - - /* boot commands */ /* * Should we panic when a soft-lockup or hard-lockup occurs: @@ -58,7 +55,7 @@ static int __init hardlockup_panic_setup(char *str) if (!strncmp(str, "panic", 5)) hardlockup_panic = 1; else if (!strncmp(str, "0", 1)) - no_watchdog = 1; + watchdog_enabled = 0; return 1; } __setup("nmi_watchdog=", hardlockup_panic_setup); @@ -77,7 +74,7 @@ __setup("softlockup_panic=", softlockup_panic_setup); static int __init nowatchdog_setup(char *str) { - no_watchdog = 1; + watchdog_enabled = 0; return 1; } __setup("nowatchdog", nowatchdog_setup); @@ -85,7 +82,7 @@ __setup("nowatchdog", nowatchdog_setup); /* deprecated */ static int __init nosoftlockup_setup(char *str) { - no_watchdog = 1; + watchdog_enabled = 0; return 1; } __setup("nosoftlockup", nosoftlockup_setup); @@ -476,9 +473,6 @@ static void watchdog_disable_all_cpus(void) { int cpu; - if (no_watchdog) - return; - for_each_online_cpu(cpu) watchdog_disable(cpu); @@ -530,7 +524,8 @@ cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) break; case CPU_ONLINE: case CPU_ONLINE_FROZEN: - err = watchdog_enable(hotcpu); + if (watchdog_enabled) + err = watchdog_enable(hotcpu); break; #ifdef CONFIG_HOTPLUG_CPU case CPU_UP_CANCELED: @@ -555,9 +550,6 @@ void __init lockup_detector_init(void) void *cpu = (void *)(long)smp_processor_id(); int err; - if (no_watchdog) - return; - err = cpu_callback(&cpu_nfb, CPU_UP_PREPARE, cpu); WARN_ON(notifier_to_errno(err)); -- cgit v1.2.3-18-g5258 From 397357666de6b5b6adb5fa99f9758ec8cf30ac34 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Fri, 28 Jan 2011 11:00:32 -0500 Subject: watchdog: Fix sysctl consistency If it was not possible to enable watchdog for any cpu, switch watchdog_enabled back to 0, because it's visible via kernel.watchdog sysctl. Signed-off-by: Marcin Slusarz Signed-off-by: Don Zickus Cc: Peter Zijlstra Cc: Frederic Weisbecker Cc: LKML-Reference: <1296230433-6261-2-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar --- kernel/watchdog.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/kernel/watchdog.c b/kernel/watchdog.c index d9961ea1c3f..c7e0049344b 100644 --- a/kernel/watchdog.c +++ b/kernel/watchdog.c @@ -429,9 +429,6 @@ static int watchdog_enable(int cpu) wake_up_process(p); } - /* if any cpu succeeds, watchdog is considered enabled for the system */ - watchdog_enabled = 1; - return 0; } @@ -459,12 +456,16 @@ static void watchdog_disable(int cpu) static void watchdog_enable_all_cpus(void) { int cpu; - int result = 0; + + watchdog_enabled = 0; for_each_online_cpu(cpu) - result += watchdog_enable(cpu); + if (!watchdog_enable(cpu)) + /* if any cpu succeeds, watchdog is considered + enabled for the system */ + watchdog_enabled = 1; - if (result) + if (!watchdog_enabled) printk(KERN_ERR "watchdog: failed to be enabled on some cpus\n"); } -- cgit v1.2.3-18-g5258 From 9ffdc6c37df131f89d52001e0ef03091b158826f Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Fri, 28 Jan 2011 11:00:33 -0500 Subject: watchdog: Don't change watchdog state on read of sysctl Signed-off-by: Marcin Slusarz [ add {}'s to fix a warning ] Signed-off-by: Don Zickus Cc: Peter Zijlstra Cc: Frederic Weisbecker Cc: LKML-Reference: <1296230433-6261-3-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar --- kernel/watchdog.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/kernel/watchdog.c b/kernel/watchdog.c index c7e0049344b..f37f974aa81 100644 --- a/kernel/watchdog.c +++ b/kernel/watchdog.c @@ -493,10 +493,12 @@ int proc_dowatchdog_enabled(struct ctl_table *table, int write, { proc_dointvec(table, write, buffer, length, ppos); - if (watchdog_enabled) - watchdog_enable_all_cpus(); - else - watchdog_disable_all_cpus(); + if (write) { + if (watchdog_enabled) + watchdog_enable_all_cpus(); + else + watchdog_disable_all_cpus(); + } return 0; } -- cgit v1.2.3-18-g5258 From 9334ef755f060e251f3f395caeda1a58b6834ea3 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 28 Jan 2011 11:53:03 +0000 Subject: drm: Don't switch fb when disabling an output In drm_crtc_helper_set_config, we call drm_crtc_helper_set_mode which may return early and do no operation if the crtc is to be disabled. In this case we merrily swap to the new fb, discarding the old_fb believing that it has been cleaned up. However, due to the early return, the old_fb was not presented to the backend for correct reaping, and nor was the new one - which is about to be reaped via the drm_helper_disable_unused_functions(), leading to incorrect refcounting of the pinned objects. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=27722 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29857 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29230 Tested-by: Takashi Iwai Signed-off-by: Chris Wilson --- drivers/gpu/drm/drm_crtc_helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 952b3d4fb2a..468e8e16c80 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -649,8 +649,8 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) mode_changed = true; if (mode_changed) { - set->crtc->enabled = (set->mode != NULL); - if (set->mode != NULL) { + set->crtc->enabled = drm_helper_crtc_in_use(set->crtc); + if (set->crtc->enabled) { DRM_DEBUG_KMS("attempting to set mode from" " userspace\n"); drm_mode_debug_printmodeline(set->mode); -- cgit v1.2.3-18-g5258 From ede3ff5204b0117d00609f4980df3b864cefe96f Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 31 Jan 2011 11:16:33 +0000 Subject: drm: Simplify and defend later checks when disabling a crtc By setting the FB of a CRTC to NULL, we are turning off the CRTC (and so disable the unused encoders and connectors). As such we can simplify the later tests by making sure the set->mode is NULL. Setting the num_connectors to zero means that we do not need to loop over the unused connectors. All current usage appears correct, this only builds additional defense into the routine. References: https://bugzilla.kernel.org/show_bug.cgi?id=27722 Tested-by: Takashi Iwai Signed-off-by: Chris Wilson --- drivers/gpu/drm/drm_crtc_helper.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 468e8e16c80..c4178d7c6a0 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -497,14 +497,17 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) crtc_funcs = set->crtc->helper_private; + if (!set->mode) + set->fb = NULL; + if (set->fb) { DRM_DEBUG_KMS("[CRTC:%d] [FB:%d] #connectors=%d (x y) (%i %i)\n", set->crtc->base.id, set->fb->base.id, (int)set->num_connectors, set->x, set->y); } else { - DRM_DEBUG_KMS("[CRTC:%d] [NOFB] #connectors=%d (x y) (%i %i)\n", - set->crtc->base.id, (int)set->num_connectors, - set->x, set->y); + DRM_DEBUG_KMS("[CRTC:%d] [NOFB]\n", set->crtc->base.id); + set->mode = NULL; + set->num_connectors = 0; } dev = set->crtc->dev; -- cgit v1.2.3-18-g5258 From 021a8455bedb01750fa8047c8576e19d5af9a99f Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 28 Jan 2011 11:31:56 +0000 Subject: drm: Avoid leak of adjusted mode along quick set_mode paths Signed-off-by: Chris Wilson --- drivers/gpu/drm/drm_crtc_helper.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index c4178d7c6a0..b34cc7372b5 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -343,13 +343,12 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc, struct drm_encoder *encoder; bool ret = true; - adjusted_mode = drm_mode_duplicate(dev, mode); - crtc->enabled = drm_helper_crtc_in_use(crtc); - if (!crtc->enabled) return true; + adjusted_mode = drm_mode_duplicate(dev, mode); + saved_hwmode = crtc->hwmode; saved_mode = crtc->mode; saved_x = crtc->x; @@ -437,10 +436,9 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc, */ drm_calc_timestamping_constants(crtc); - /* XXX free adjustedmode */ - drm_mode_destroy(dev, adjusted_mode); /* FIXME: add subpixel order */ done: + drm_mode_destroy(dev, adjusted_mode); if (!ret) { crtc->hwmode = saved_hwmode; crtc->mode = saved_mode; -- cgit v1.2.3-18-g5258 From 78c6e170badd22c86a5b50a7eb038a02024b8f03 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 31 Jan 2011 10:48:04 +0000 Subject: drm/i915: Suppress spurious vblank interrupts Hugh Dickins found that characters in xterm were going missing and oft delayed. Being the curious type, he managed to associate this with the new high-precision vblank patches; disabling these he found, restored the orderliness of his characters. The oddness begins when one realised that Hugh was not using vblanks at all on his system (fvwm and some xterms). Instead, all he had to go on were warning of a pipe underrun, curiously enough at around 60Hz. He poked and found that in addition to the underrun warning, the hardware was flagging the start of a new frame, a vblank, which in turn was kicking off the pending vblank processing code. There is little we can do for the underruns on Hugh's machine, a Crestline [965GM], which must have its FIFO watermarks set to 8. However, we do not need to process the vblank if we know that they are disabled... Reported-by: Hugh Dickins Signed-off-by: Chris Wilson --- drivers/gpu/drm/drm_irq.c | 7 ++++--- drivers/gpu/drm/i915/i915_irq.c | 8 ++++---- include/drm/drmP.h | 2 +- 3 files changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index 0054e957203..3dadfa2a852 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -1250,7 +1250,7 @@ void drm_handle_vblank_events(struct drm_device *dev, int crtc) * Drivers should call this routine in their vblank interrupt handlers to * update the vblank counter and send any signals that may be pending. */ -void drm_handle_vblank(struct drm_device *dev, int crtc) +bool drm_handle_vblank(struct drm_device *dev, int crtc) { u32 vblcount; s64 diff_ns; @@ -1258,7 +1258,7 @@ void drm_handle_vblank(struct drm_device *dev, int crtc) unsigned long irqflags; if (!dev->num_crtcs) - return; + return false; /* Need timestamp lock to prevent concurrent execution with * vblank enable/disable, as this would cause inconsistent @@ -1269,7 +1269,7 @@ void drm_handle_vblank(struct drm_device *dev, int crtc) /* Vblank irq handling disabled. Nothing to do. */ if (!dev->vblank_enabled[crtc]) { spin_unlock_irqrestore(&dev->vblank_time_lock, irqflags); - return; + return false; } /* Fetch corresponding timestamp for this vblank interval from @@ -1311,5 +1311,6 @@ void drm_handle_vblank(struct drm_device *dev, int crtc) drm_handle_vblank_events(dev, crtc); spin_unlock_irqrestore(&dev->vblank_time_lock, irqflags); + return true; } EXPORT_SYMBOL(drm_handle_vblank); diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 062f353497e..97f946dcc1a 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -1196,18 +1196,18 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) intel_finish_page_flip_plane(dev, 1); } - if (pipea_stats & vblank_status) { + if (pipea_stats & vblank_status && + drm_handle_vblank(dev, 0)) { vblank++; - drm_handle_vblank(dev, 0); if (!dev_priv->flip_pending_is_done) { i915_pageflip_stall_check(dev, 0); intel_finish_page_flip(dev, 0); } } - if (pipeb_stats & vblank_status) { + if (pipeb_stats & vblank_status && + drm_handle_vblank(dev, 1)) { vblank++; - drm_handle_vblank(dev, 1); if (!dev_priv->flip_pending_is_done) { i915_pageflip_stall_check(dev, 1); intel_finish_page_flip(dev, 1); diff --git a/include/drm/drmP.h b/include/drm/drmP.h index a4694c61033..fe29aadb129 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -1367,7 +1367,7 @@ extern int drm_vblank_wait(struct drm_device *dev, unsigned int *vbl_seq); extern u32 drm_vblank_count(struct drm_device *dev, int crtc); extern u32 drm_vblank_count_and_time(struct drm_device *dev, int crtc, struct timeval *vblanktime); -extern void drm_handle_vblank(struct drm_device *dev, int crtc); +extern bool drm_handle_vblank(struct drm_device *dev, int crtc); extern int drm_vblank_get(struct drm_device *dev, int crtc); extern void drm_vblank_put(struct drm_device *dev, int crtc); extern void drm_vblank_off(struct drm_device *dev, int crtc); -- cgit v1.2.3-18-g5258 From 7c45f2c7fe8eb433a8af0f38ddeaa7e4abc05e0c Mon Sep 17 00:00:00 2001 From: Jean-François Moine Date: Mon, 24 Jan 2011 15:15:34 -0300 Subject: [media] gspca - zc3xx: Bad delay when given by a table MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Jean-François Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/zc3xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c index 865216e9362..f9710f9851c 100644 --- a/drivers/media/video/gspca/zc3xx.c +++ b/drivers/media/video/gspca/zc3xx.c @@ -5793,7 +5793,7 @@ static void usb_exchange(struct gspca_dev *gspca_dev, break; default: /* case 0xdd: * delay */ - msleep(action->val / 64 + 10); + msleep(action->idx); break; } action++; -- cgit v1.2.3-18-g5258 From 3d244065cb8764e23fe86225fb985e5deb3b26d5 Mon Sep 17 00:00:00 2001 From: Jean-François Moine Date: Mon, 24 Jan 2011 16:22:11 -0300 Subject: [media] gspca - zc3xx: Fix bad images with the sensor hv7131r MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The problem was introduced by the commit 2af0b4c60cc0daf0. Some registers were no more initialized. Tested-by: Tested-by: Signed-off-by: Jean-François Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/zc3xx.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c index f9710f9851c..cf65fb36e88 100644 --- a/drivers/media/video/gspca/zc3xx.c +++ b/drivers/media/video/gspca/zc3xx.c @@ -5830,7 +5830,7 @@ static void setmatrix(struct gspca_dev *gspca_dev) [SENSOR_GC0305] = gc0305_matrix, [SENSOR_HDCS2020b] = NULL, [SENSOR_HV7131B] = NULL, - [SENSOR_HV7131R] = NULL, + [SENSOR_HV7131R] = po2030_matrix, [SENSOR_ICM105A] = po2030_matrix, [SENSOR_MC501CB] = NULL, [SENSOR_MT9V111_1] = gc0305_matrix, @@ -5936,6 +5936,7 @@ static void setquality(struct gspca_dev *gspca_dev) case SENSOR_ADCM2700: case SENSOR_GC0305: case SENSOR_HV7131B: + case SENSOR_HV7131R: case SENSOR_OV7620: case SENSOR_PAS202B: case SENSOR_PO2030: @@ -6108,11 +6109,13 @@ static void send_unknown(struct gspca_dev *gspca_dev, int sensor) reg_w(gspca_dev, 0x02, 0x003b); reg_w(gspca_dev, 0x00, 0x0038); break; + case SENSOR_HV7131R: case SENSOR_PAS202B: reg_w(gspca_dev, 0x03, 0x003b); reg_w(gspca_dev, 0x0c, 0x003a); reg_w(gspca_dev, 0x0b, 0x0039); - reg_w(gspca_dev, 0x0b, 0x0038); + if (sensor == SENSOR_PAS202B) + reg_w(gspca_dev, 0x0b, 0x0038); break; } } @@ -6704,10 +6707,13 @@ static int sd_start(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x02, 0x003b); reg_w(gspca_dev, 0x00, 0x0038); break; + case SENSOR_HV7131R: case SENSOR_PAS202B: reg_w(gspca_dev, 0x03, 0x003b); reg_w(gspca_dev, 0x0c, 0x003a); reg_w(gspca_dev, 0x0b, 0x0039); + if (sd->sensor == SENSOR_HV7131R) + reg_w(gspca_dev, 0x50, ZC3XX_R11D_GLOBALGAIN); break; } @@ -6720,6 +6726,7 @@ static int sd_start(struct gspca_dev *gspca_dev) break; case SENSOR_PAS202B: case SENSOR_GC0305: + case SENSOR_HV7131R: case SENSOR_TAS5130C: reg_r(gspca_dev, 0x0008); /* fall thru */ @@ -6760,6 +6767,12 @@ static int sd_start(struct gspca_dev *gspca_dev) /* ms-win + */ reg_w(gspca_dev, 0x40, 0x0117); break; + case SENSOR_HV7131R: + i2c_write(gspca_dev, 0x25, 0x04, 0x00); /* exposure */ + i2c_write(gspca_dev, 0x26, 0x93, 0x00); + i2c_write(gspca_dev, 0x27, 0xe0, 0x00); + reg_w(gspca_dev, 0x00, ZC3XX_R1A7_CALCGLOBALMEAN); + break; case SENSOR_GC0305: case SENSOR_TAS5130C: reg_w(gspca_dev, 0x09, 0x01ad); /* (from win traces) */ -- cgit v1.2.3-18-g5258 From a5ecdfb3dab0ed55ca72fb5ad73657baf2af2fa0 Mon Sep 17 00:00:00 2001 From: Jean-François Moine Date: Mon, 24 Jan 2011 16:31:58 -0300 Subject: [media] gspca - zc3xx: Discard the partial frames MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In some cases, some frames may not end with the JPEG end of frame. Being not complete, they are now discarded. Signed-off-by: Jean-François Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/zc3xx.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c index cf65fb36e88..47236a58bf3 100644 --- a/drivers/media/video/gspca/zc3xx.c +++ b/drivers/media/video/gspca/zc3xx.c @@ -6821,9 +6821,17 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, { struct sd *sd = (struct sd *) gspca_dev; - if (data[0] == 0xff && data[1] == 0xd8) { /* start of frame */ + /* check the JPEG end of frame */ + if (len >= 3 + && data[len - 3] == 0xff && data[len - 2] == 0xd9) { +/*fixme: what does the last byte mean?*/ gspca_frame_add(gspca_dev, LAST_PACKET, - NULL, 0); + data, len - 1); + return; + } + + /* check the JPEG start of a frame */ + if (data[0] == 0xff && data[1] == 0xd8) { /* put the JPEG header in the new frame */ gspca_frame_add(gspca_dev, FIRST_PACKET, sd->jpeg_hdr, JPEG_HDR_SZ); -- cgit v1.2.3-18-g5258 From 86ee65948886e53b9fd336dec400f4b8f1704f7f Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Tue, 18 Jan 2011 02:27:45 -0300 Subject: [media] rc/mce: add mappings for missing keys Per http://mediacenterguides.com/book/export/html/31 and investigation by Erin, we were missing these last three mappings to complete the mce key table. Lets remedy that. Reported-by: Erin Simonds Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/keymaps/rc-rc6-mce.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/media/rc/keymaps/rc-rc6-mce.c b/drivers/media/rc/keymaps/rc-rc6-mce.c index 3bf3337875d..2f5dc0622b9 100644 --- a/drivers/media/rc/keymaps/rc-rc6-mce.c +++ b/drivers/media/rc/keymaps/rc-rc6-mce.c @@ -3,6 +3,9 @@ * * Copyright (c) 2010 by Jarod Wilson * + * See http://mediacenterguides.com/book/export/html/31 for details on + * key mappings. + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -60,6 +63,9 @@ static struct rc_map_table rc6_mce[] = { { 0x800f0426, KEY_EPG }, /* Guide */ { 0x800f0427, KEY_ZOOM }, /* Aspect */ + { 0x800f0432, KEY_MODE }, /* Visualization */ + { 0x800f0433, KEY_PRESENTATION }, /* Slide Show */ + { 0x800f0434, KEY_EJECTCD }, { 0x800f043a, KEY_BRIGHTNESSUP }, { 0x800f0446, KEY_TV }, -- cgit v1.2.3-18-g5258 From 7f2a06deaa22104a4cf4c0cc3d7c44c7e3228ef3 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Wed, 19 Jan 2011 18:10:14 -0300 Subject: [media] hdpvr: fix up i2c device registration We have to actually call i2c_new_device() once for each of the rx and tx addresses. Also improve error-handling and device remove i2c cleanup. Reviewed-by: Andy Walls Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/hdpvr/hdpvr-core.c | 24 ++++++++++++++++++++---- drivers/media/video/hdpvr/hdpvr-i2c.c | 30 +++++++++++++++++++----------- drivers/media/video/hdpvr/hdpvr.h | 3 ++- 3 files changed, 41 insertions(+), 16 deletions(-) diff --git a/drivers/media/video/hdpvr/hdpvr-core.c b/drivers/media/video/hdpvr/hdpvr-core.c index a6572e5ae36..a27d93b503a 100644 --- a/drivers/media/video/hdpvr/hdpvr-core.c +++ b/drivers/media/video/hdpvr/hdpvr-core.c @@ -283,6 +283,7 @@ static int hdpvr_probe(struct usb_interface *interface, struct hdpvr_device *dev; struct usb_host_interface *iface_desc; struct usb_endpoint_descriptor *endpoint; + struct i2c_client *client; size_t buffer_size; int i; int retval = -ENOMEM; @@ -381,13 +382,21 @@ static int hdpvr_probe(struct usb_interface *interface, #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) retval = hdpvr_register_i2c_adapter(dev); if (retval < 0) { - v4l2_err(&dev->v4l2_dev, "registering i2c adapter failed\n"); + v4l2_err(&dev->v4l2_dev, "i2c adapter register failed\n"); goto error; } - retval = hdpvr_register_i2c_ir(dev); - if (retval < 0) - v4l2_err(&dev->v4l2_dev, "registering i2c IR devices failed\n"); + client = hdpvr_register_ir_rx_i2c(dev); + if (!client) { + v4l2_err(&dev->v4l2_dev, "i2c IR RX device register failed\n"); + goto reg_fail; + } + + client = hdpvr_register_ir_tx_i2c(dev); + if (!client) { + v4l2_err(&dev->v4l2_dev, "i2c IR TX device register failed\n"); + goto reg_fail; + } #endif /* let the user know what node this device is now attached to */ @@ -395,6 +404,10 @@ static int hdpvr_probe(struct usb_interface *interface, video_device_node_name(dev->video_dev)); return 0; +reg_fail: +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + i2c_del_adapter(&dev->i2c_adapter); +#endif error: if (dev) { /* Destroy single thread */ @@ -424,6 +437,9 @@ static void hdpvr_disconnect(struct usb_interface *interface) mutex_lock(&dev->io_mutex); hdpvr_cancel_queue(dev); mutex_unlock(&dev->io_mutex); +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + i2c_del_adapter(&dev->i2c_adapter); +#endif video_unregister_device(dev->video_dev); atomic_dec(&dev_nr); } diff --git a/drivers/media/video/hdpvr/hdpvr-i2c.c b/drivers/media/video/hdpvr/hdpvr-i2c.c index 89b71faeaac..e53fa55d56a 100644 --- a/drivers/media/video/hdpvr/hdpvr-i2c.c +++ b/drivers/media/video/hdpvr/hdpvr-i2c.c @@ -31,26 +31,34 @@ #define Z8F0811_IR_RX_I2C_ADDR 0x71 -static struct i2c_board_info hdpvr_i2c_board_info = { - I2C_BOARD_INFO("ir_tx_z8f0811_hdpvr", Z8F0811_IR_TX_I2C_ADDR), - I2C_BOARD_INFO("ir_rx_z8f0811_hdpvr", Z8F0811_IR_RX_I2C_ADDR), -}; +struct i2c_client *hdpvr_register_ir_tx_i2c(struct hdpvr_device *dev) +{ + struct IR_i2c_init_data *init_data = &dev->ir_i2c_init_data; + struct i2c_board_info hdpvr_ir_tx_i2c_board_info = { + I2C_BOARD_INFO("ir_tx_z8f0811_hdpvr", Z8F0811_IR_TX_I2C_ADDR), + }; + + init_data->name = "HD-PVR"; + hdpvr_ir_tx_i2c_board_info.platform_data = init_data; -int hdpvr_register_i2c_ir(struct hdpvr_device *dev) + return i2c_new_device(&dev->i2c_adapter, &hdpvr_ir_tx_i2c_board_info); +} + +struct i2c_client *hdpvr_register_ir_rx_i2c(struct hdpvr_device *dev) { - struct i2c_client *c; struct IR_i2c_init_data *init_data = &dev->ir_i2c_init_data; + struct i2c_board_info hdpvr_ir_rx_i2c_board_info = { + I2C_BOARD_INFO("ir_rx_z8f0811_hdpvr", Z8F0811_IR_RX_I2C_ADDR), + }; /* Our default information for ir-kbd-i2c.c to use */ init_data->ir_codes = RC_MAP_HAUPPAUGE_NEW; init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR; init_data->type = RC_TYPE_RC5; - init_data->name = "HD PVR"; - hdpvr_i2c_board_info.platform_data = init_data; - - c = i2c_new_device(&dev->i2c_adapter, &hdpvr_i2c_board_info); + init_data->name = "HD-PVR"; + hdpvr_ir_rx_i2c_board_info.platform_data = init_data; - return (c == NULL) ? -ENODEV : 0; + return i2c_new_device(&dev->i2c_adapter, &hdpvr_ir_rx_i2c_board_info); } static int hdpvr_i2c_read(struct hdpvr_device *dev, int bus, diff --git a/drivers/media/video/hdpvr/hdpvr.h b/drivers/media/video/hdpvr/hdpvr.h index ee74e3be9a6..072f23c570f 100644 --- a/drivers/media/video/hdpvr/hdpvr.h +++ b/drivers/media/video/hdpvr/hdpvr.h @@ -313,7 +313,8 @@ int hdpvr_cancel_queue(struct hdpvr_device *dev); /* i2c adapter registration */ int hdpvr_register_i2c_adapter(struct hdpvr_device *dev); -int hdpvr_register_i2c_ir(struct hdpvr_device *dev); +struct i2c_client *hdpvr_register_ir_rx_i2c(struct hdpvr_device *dev); +struct i2c_client *hdpvr_register_ir_tx_i2c(struct hdpvr_device *dev); /*========================================================================*/ /* buffer management */ -- cgit v1.2.3-18-g5258 From 5766d204ae6c1f54beaef37a18c3c9b5e32c3b16 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Wed, 19 Jan 2011 18:49:19 -0300 Subject: [media] lirc_zilog: z8 on usb doesn't like back-to-back i2c_master_send Both the HD-PVR and HVR-1950, driven by the hdpvr and pvrusb2 drivers respectively, have a zilog z8 chip exposed via i2c. These are both usb-connected devices, and on both of them, back-to-back i2c_master_send calls that work fine with a z8 on a pci card fail with a -EIO, as the chip isn't yet ready from the prior command. To cope with that, add a delay and retry loop where necessary. Acked-by: Andy Walls Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/lirc/lirc_zilog.c | 32 ++++++++++++++++++++++++++------ 1 file changed, 26 insertions(+), 6 deletions(-) diff --git a/drivers/staging/lirc/lirc_zilog.c b/drivers/staging/lirc/lirc_zilog.c index 3fe5f416019..0aad0d7a74a 100644 --- a/drivers/staging/lirc/lirc_zilog.c +++ b/drivers/staging/lirc/lirc_zilog.c @@ -495,7 +495,7 @@ static int send_data_block(struct IR_tx *tx, unsigned char *data_block) /* send boot data to the IR TX device */ static int send_boot_data(struct IR_tx *tx) { - int ret; + int ret, i; unsigned char buf[4]; /* send the boot block */ @@ -503,7 +503,7 @@ static int send_boot_data(struct IR_tx *tx) if (ret != 0) return ret; - /* kick it off? */ + /* Hit the go button to activate the new boot data */ buf[0] = 0x00; buf[1] = 0x20; ret = i2c_master_send(tx->c, buf, 2); @@ -511,7 +511,19 @@ static int send_boot_data(struct IR_tx *tx) zilog_error("i2c_master_send failed with %d\n", ret); return ret < 0 ? ret : -EFAULT; } - ret = i2c_master_send(tx->c, buf, 1); + + /* + * Wait for zilog to settle after hitting go post boot block upload. + * Without this delay, the HD-PVR and HVR-1950 both return an -EIO + * upon attempting to get firmware revision, and tx probe thus fails. + */ + for (i = 0; i < 10; i++) { + ret = i2c_master_send(tx->c, buf, 1); + if (ret == 1) + break; + udelay(100); + } + if (ret != 1) { zilog_error("i2c_master_send failed with %d\n", ret); return ret < 0 ? ret : -EFAULT; @@ -523,8 +535,8 @@ static int send_boot_data(struct IR_tx *tx) zilog_error("i2c_master_recv failed with %d\n", ret); return 0; } - if (buf[0] != 0x80) { - zilog_error("unexpected IR TX response: %02x\n", buf[0]); + if ((buf[0] != 0x80) && (buf[0] != 0xa0)) { + zilog_error("unexpected IR TX init response: %02x\n", buf[0]); return 0; } zilog_notify("Zilog/Hauppauge IR blaster firmware version " @@ -827,7 +839,15 @@ static int send_code(struct IR_tx *tx, unsigned int code, unsigned int key) zilog_error("i2c_master_send failed with %d\n", ret); return ret < 0 ? ret : -EFAULT; } - ret = i2c_master_send(tx->c, buf, 1); + + /* Give the z8 a moment to process data block */ + for (i = 0; i < 10; i++) { + ret = i2c_master_send(tx->c, buf, 1); + if (ret == 1) + break; + udelay(100); + } + if (ret != 1) { zilog_error("i2c_master_send failed with %d\n", ret); return ret < 0 ? ret : -EFAULT; -- cgit v1.2.3-18-g5258 From 8df59918b5bc2c3c80e5e0b9386228df7ad54e65 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Thu, 20 Jan 2011 18:31:18 -0300 Subject: [media] ir-kbd-i2c: improve remote behavior with z8 behind usb Add the same "are you ready?" i2c_master_send() poll command to get_key_haup_xvr found in lirc_zilog, which is apparently seen in the Windows driver for the PVR-150 w/a z8. This stabilizes what is received from both the HD-PVR and HVR-1950, even with their polling intervals at the default of 100, thus the removal of the custom 260ms polling_interval in pvrusb2-i2c-core.c. Acked-by: Andy Walls Acked-by: Mike Isely Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ir-kbd-i2c.c | 13 +++++++++++++ drivers/media/video/pvrusb2/pvrusb2-i2c-core.c | 1 - 2 files changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c index d2b20ad383a..a221ad68b33 100644 --- a/drivers/media/video/ir-kbd-i2c.c +++ b/drivers/media/video/ir-kbd-i2c.c @@ -128,6 +128,19 @@ static int get_key_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) static int get_key_haup_xvr(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) { + int ret; + unsigned char buf[1] = { 0 }; + + /* + * This is the same apparent "are you ready?" poll command observed + * watching Windows driver traffic and implemented in lirc_zilog. With + * this added, we get far saner remote behavior with z8 chips on usb + * connected devices, even with the default polling interval of 100ms. + */ + ret = i2c_master_send(ir->c, buf, 1); + if (ret != 1) + return (ret < 0) ? ret : -EINVAL; + return get_key_haup_common (ir, ir_key, ir_raw, 6, 3); } diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c index ccc884948f3..451ecd485f9 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c +++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c @@ -597,7 +597,6 @@ static void pvr2_i2c_register_ir(struct pvr2_hdw *hdw) init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR; init_data->type = RC_TYPE_RC5; init_data->name = hdw->hdw_desc->description; - init_data->polling_interval = 260; /* ms From lirc_zilog */ /* IR Receiver */ info.addr = 0x71; info.platform_data = init_data; -- cgit v1.2.3-18-g5258 From 457e2ffcef340f0fa5c1a8edb57e8c42279c7edf Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Tue, 18 Jan 2011 02:33:08 -0300 Subject: [media] rc/ir-lirc-codec: add back debug spew Some occasionally useful debug spew disappeared as part of a feature update a while back, and I'm finding myself in need of it again to help diagnose some issues. Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/ir-lirc-codec.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/media/rc/ir-lirc-codec.c b/drivers/media/rc/ir-lirc-codec.c index f011c5d9dea..1c5cc65ea1e 100644 --- a/drivers/media/rc/ir-lirc-codec.c +++ b/drivers/media/rc/ir-lirc-codec.c @@ -1,4 +1,4 @@ -/* ir-lirc-codec.c - ir-core to classic lirc interface bridge +/* ir-lirc-codec.c - rc-core to classic lirc interface bridge * * Copyright (C) 2010 by Jarod Wilson * @@ -47,6 +47,7 @@ static int ir_lirc_decode(struct rc_dev *dev, struct ir_raw_event ev) /* Carrier reports */ if (ev.carrier_report) { sample = LIRC_FREQUENCY(ev.carrier); + IR_dprintk(2, "carrier report (freq: %d)\n", sample); /* Packet end */ } else if (ev.timeout) { @@ -62,6 +63,7 @@ static int ir_lirc_decode(struct rc_dev *dev, struct ir_raw_event ev) return 0; sample = LIRC_TIMEOUT(ev.duration / 1000); + IR_dprintk(2, "timeout report (duration: %d)\n", sample); /* Normal sample */ } else { @@ -85,6 +87,8 @@ static int ir_lirc_decode(struct rc_dev *dev, struct ir_raw_event ev) sample = ev.pulse ? LIRC_PULSE(ev.duration / 1000) : LIRC_SPACE(ev.duration / 1000); + IR_dprintk(2, "delivering %uus %s to lirc_dev\n", + TO_US(ev.duration), TO_STR(ev.pulse)); } lirc_buffer_write(dev->raw->lirc.drv->rbuf, -- cgit v1.2.3-18-g5258 From b4608faee04047ecb15d2acf276d12e21b170b0d Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Tue, 18 Jan 2011 17:31:24 -0300 Subject: [media] rc: use time unit conversion macros correctly Due to my own stupidity, some of the wrong time unit conversion macros were being used inside some of the IR drivers I've been working on. Fix that, and convert over some additional places to also use the macros. Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/mceusb.c | 6 +++--- drivers/media/rc/nuvoton-cir.c | 6 +++--- drivers/media/rc/streamzap.c | 12 ++++++------ 3 files changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c index 079353e5d55..6012fb2d722 100644 --- a/drivers/media/rc/mceusb.c +++ b/drivers/media/rc/mceusb.c @@ -816,7 +816,7 @@ static void mceusb_handle_command(struct mceusb_dev *ir, int index) switch (ir->buf_in[index]) { /* 2-byte return value commands */ case MCE_CMD_S_TIMEOUT: - ir->rc->timeout = MS_TO_NS((hi << 8 | lo) / 2); + ir->rc->timeout = US_TO_NS((hi << 8 | lo) / 2); break; /* 1-byte return value commands */ @@ -857,7 +857,7 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len) ir->rem--; rawir.pulse = ((ir->buf_in[i] & MCE_PULSE_BIT) != 0); rawir.duration = (ir->buf_in[i] & MCE_PULSE_MASK) - * MS_TO_US(MCE_TIME_UNIT); + * US_TO_NS(MCE_TIME_UNIT); dev_dbg(ir->dev, "Storing %s with duration %d\n", rawir.pulse ? "pulse" : "space", @@ -1060,7 +1060,7 @@ static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir) rc->priv = ir; rc->driver_type = RC_DRIVER_IR_RAW; rc->allowed_protos = RC_TYPE_ALL; - rc->timeout = MS_TO_NS(1000); + rc->timeout = US_TO_NS(1000); if (!ir->flags.no_tx) { rc->s_tx_mask = mceusb_set_tx_mask; rc->s_tx_carrier = mceusb_set_tx_carrier; diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c index dd4caf8ef80..273d9d67479 100644 --- a/drivers/media/rc/nuvoton-cir.c +++ b/drivers/media/rc/nuvoton-cir.c @@ -460,7 +460,7 @@ static u32 nvt_rx_carrier_detect(struct nvt_dev *nvt) return 0; } - carrier = (count * 1000000) / duration; + carrier = MS_TO_NS(count) / duration; if ((carrier > MAX_CARRIER) || (carrier < MIN_CARRIER)) nvt_dbg("WTF? Carrier frequency out of range!"); @@ -612,8 +612,8 @@ static void nvt_process_rx_ir_data(struct nvt_dev *nvt) sample = nvt->buf[i]; rawir.pulse = ((sample & BUF_PULSE_BIT) != 0); - rawir.duration = (sample & BUF_LEN_MASK) - * SAMPLE_PERIOD * 1000; + rawir.duration = US_TO_NS((sample & BUF_LEN_MASK) + * SAMPLE_PERIOD); if ((sample & BUF_LEN_MASK) == BUF_LEN_MASK) { if (nvt->rawir.pulse == rawir.pulse) diff --git a/drivers/media/rc/streamzap.c b/drivers/media/rc/streamzap.c index 6e2911c2abf..d9b6b48893c 100644 --- a/drivers/media/rc/streamzap.c +++ b/drivers/media/rc/streamzap.c @@ -164,7 +164,7 @@ static void sz_push_full_pulse(struct streamzap_ir *sz, sz->signal_start.tv_usec - sz->signal_last.tv_usec); rawir.duration -= sz->sum; - rawir.duration *= 1000; + rawir.duration = US_TO_NS(rawir.duration); rawir.duration &= IR_MAX_DURATION; } sz_push(sz, rawir); @@ -177,7 +177,7 @@ static void sz_push_full_pulse(struct streamzap_ir *sz, rawir.duration = ((int) value) * SZ_RESOLUTION; rawir.duration += SZ_RESOLUTION / 2; sz->sum += rawir.duration; - rawir.duration *= 1000; + rawir.duration = US_TO_NS(rawir.duration); rawir.duration &= IR_MAX_DURATION; sz_push(sz, rawir); } @@ -197,7 +197,7 @@ static void sz_push_full_space(struct streamzap_ir *sz, rawir.duration = ((int) value) * SZ_RESOLUTION; rawir.duration += SZ_RESOLUTION / 2; sz->sum += rawir.duration; - rawir.duration *= 1000; + rawir.duration = US_TO_NS(rawir.duration); sz_push(sz, rawir); } @@ -430,13 +430,13 @@ static int __devinit streamzap_probe(struct usb_interface *intf, sz->decoder_state = PulseSpace; /* FIXME: don't yet have a way to set this */ sz->timeout_enabled = true; - sz->rdev->timeout = (((SZ_TIMEOUT * SZ_RESOLUTION * 1000) & + sz->rdev->timeout = ((US_TO_NS(SZ_TIMEOUT * SZ_RESOLUTION) & IR_MAX_DURATION) | 0x03000000); #if 0 /* not yet supported, depends on patches from maxim */ /* see also: LIRC_GET_REC_RESOLUTION and LIRC_SET_REC_TIMEOUT */ - sz->min_timeout = SZ_TIMEOUT * SZ_RESOLUTION * 1000; - sz->max_timeout = SZ_TIMEOUT * SZ_RESOLUTION * 1000; + sz->min_timeout = US_TO_NS(SZ_TIMEOUT * SZ_RESOLUTION); + sz->max_timeout = US_TO_NS(SZ_TIMEOUT * SZ_RESOLUTION); #endif do_gettimeofday(&sz->signal_start); -- cgit v1.2.3-18-g5258 From 5bd9d73c84a519b828f95ce295587b83eab3329e Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Wed, 26 Jan 2011 12:20:09 -0300 Subject: [media] mceusb: really fix remaining keybounce issues Make sure rawir struct is zeroed out before populating it for each ir_raw_event_store_with_filter() call, and when we see a trailing 0x80 packet (end-of-data), issue an ir_raw_event_reset() call. Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/mceusb.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c index 6012fb2d722..6df0a498064 100644 --- a/drivers/media/rc/mceusb.c +++ b/drivers/media/rc/mceusb.c @@ -855,6 +855,7 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len) break; case PARSE_IRDATA: ir->rem--; + init_ir_raw_event(&rawir); rawir.pulse = ((ir->buf_in[i] & MCE_PULSE_BIT) != 0); rawir.duration = (ir->buf_in[i] & MCE_PULSE_MASK) * US_TO_NS(MCE_TIME_UNIT); @@ -883,6 +884,8 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len) i, ir->rem + 1, false); if (ir->rem) ir->parser_state = PARSE_IRDATA; + else + ir_raw_event_reset(ir->rc); break; } -- cgit v1.2.3-18-g5258 From 56b0ec30c4bc096848efc617f29e525cde2f7084 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Thu, 27 Jan 2011 15:08:35 -0300 Subject: [media] rc/streamzap: fix reporting response times The streamzap driver has relatively low sampling resolution, and any delays in reporting events seem to cause some minor problems for the likes of irw when using the lirc bridge driver, resulting in a single keypress registering as multiple independent ones, rather than as a single press with repeats. If we call ir_raw_event_handle() more frequently and reset the rawir kfifo at end-of-signal, the behavior improves quite a bit. Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/streamzap.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/rc/streamzap.c b/drivers/media/rc/streamzap.c index d9b6b48893c..e435d94c077 100644 --- a/drivers/media/rc/streamzap.c +++ b/drivers/media/rc/streamzap.c @@ -273,6 +273,7 @@ static void streamzap_callback(struct urb *urb) if (sz->timeout_enabled) sz_push(sz, rawir); ir_raw_event_handle(sz->rdev); + ir_raw_event_reset(sz->rdev); } else { sz_push_full_space(sz, sz->buf_in[i]); } @@ -290,6 +291,7 @@ static void streamzap_callback(struct urb *urb) } } + ir_raw_event_handle(sz->rdev); usb_submit_urb(urb, GFP_ATOMIC); return; -- cgit v1.2.3-18-g5258 From f855f6cbeb4f94cd4e4a225c2246ee8012c384a2 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Mon, 31 Jan 2011 08:41:36 -0500 Subject: cifs: make CIFS depend on CRYPTO_MD4 Recently CIFS was changed to use the kernel crypto API for MD4 hashes, but the Kconfig dependencies were not changed to reflect this. Signed-off-by: Jeff Layton Reported-and-Tested-by: Suresh Jayaraman Reviewed-by: Shirish Pargaonkar Signed-off-by: Steve French --- fs/cifs/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/cifs/Kconfig b/fs/cifs/Kconfig index ee45648b0d1..7cb0f7f847e 100644 --- a/fs/cifs/Kconfig +++ b/fs/cifs/Kconfig @@ -3,6 +3,7 @@ config CIFS depends on INET select NLS select CRYPTO + select CRYPTO_MD4 select CRYPTO_MD5 select CRYPTO_HMAC select CRYPTO_ARC4 -- cgit v1.2.3-18-g5258 From 31c2659d78c8be970833bc1e633593d291553ed3 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Mon, 31 Jan 2011 07:24:46 -0500 Subject: cifs: clean up some compiler warnings New compiler warnings that I noticed when building a patchset based on recent Fedora kernel: fs/cifs/cifssmb.c: In function 'CIFSSMBSetFileSize': fs/cifs/cifssmb.c:4813:8: warning: variable 'data_offset' set but not used [-Wunused-but-set-variable] fs/cifs/file.c: In function 'cifs_open': fs/cifs/file.c:349:24: warning: variable 'pCifsInode' set but not used [-Wunused-but-set-variable] fs/cifs/file.c: In function 'cifs_partialpagewrite': fs/cifs/file.c:1149:23: warning: variable 'cifs_sb' set but not used [-Wunused-but-set-variable] fs/cifs/file.c: In function 'cifs_iovec_write': fs/cifs/file.c:1740:9: warning: passing argument 6 of 'CIFSSMBWrite2' from incompatible pointer type [enabled by default] fs/cifs/cifsproto.h:337:12: note: expected 'unsigned int *' but argument is of type 'size_t *' fs/cifs/readdir.c: In function 'cifs_readdir': fs/cifs/readdir.c:767:23: warning: variable 'cifs_sb' set but not used [-Wunused-but-set-variable] fs/cifs/cifs_dfs_ref.c: In function 'cifs_dfs_d_automount': fs/cifs/cifs_dfs_ref.c:342:2: warning: 'rc' may be used uninitialized in this function [-Wuninitialized] fs/cifs/cifs_dfs_ref.c:278:6: note: 'rc' was declared here Signed-off-by: Jeff Layton Reviewed-by: Pavel Shilovsky Signed-off-by: Steve French --- fs/cifs/cifs_dfs_ref.c | 9 ++++----- fs/cifs/cifssmb.c | 3 --- fs/cifs/file.c | 8 ++------ fs/cifs/readdir.c | 3 --- 4 files changed, 6 insertions(+), 17 deletions(-) diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c index f1c68629f27..0a265ad9e42 100644 --- a/fs/cifs/cifs_dfs_ref.c +++ b/fs/cifs/cifs_dfs_ref.c @@ -282,8 +282,6 @@ static struct vfsmount *cifs_dfs_do_automount(struct dentry *mntpt) cFYI(1, "in %s", __func__); BUG_ON(IS_ROOT(mntpt)); - xid = GetXid(); - /* * The MSDFS spec states that paths in DFS referral requests and * responses must be prefixed by a single '\' character instead of @@ -293,7 +291,7 @@ static struct vfsmount *cifs_dfs_do_automount(struct dentry *mntpt) mnt = ERR_PTR(-ENOMEM); full_path = build_path_from_dentry(mntpt); if (full_path == NULL) - goto free_xid; + goto cdda_exit; cifs_sb = CIFS_SB(mntpt->d_inode->i_sb); tlink = cifs_sb_tlink(cifs_sb); @@ -303,9 +301,11 @@ static struct vfsmount *cifs_dfs_do_automount(struct dentry *mntpt) } ses = tlink_tcon(tlink)->ses; + xid = GetXid(); rc = get_dfs_path(xid, ses, full_path + 1, cifs_sb->local_nls, &num_referrals, &referrals, cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); + FreeXid(xid); cifs_put_tlink(tlink); @@ -338,8 +338,7 @@ success: free_dfs_info_array(referrals, num_referrals); free_full_path: kfree(full_path); -free_xid: - FreeXid(xid); +cdda_exit: cFYI(1, "leaving %s" , __func__); return mnt; } diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 3106f5e5c63..46c66ed01af 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -4914,7 +4914,6 @@ CIFSSMBSetFileSize(const int xid, struct cifsTconInfo *tcon, __u64 size, __u16 fid, __u32 pid_of_opener, bool SetAllocation) { struct smb_com_transaction2_sfi_req *pSMB = NULL; - char *data_offset; struct file_end_of_file_info *parm_data; int rc = 0; __u16 params, param_offset, offset, byte_count, count; @@ -4938,8 +4937,6 @@ CIFSSMBSetFileSize(const int xid, struct cifsTconInfo *tcon, __u64 size, param_offset = offsetof(struct smb_com_transaction2_sfi_req, Fid) - 4; offset = param_offset + params; - data_offset = (char *) (&pSMB->hdr.Protocol) + offset; - count = sizeof(struct file_end_of_file_info); pSMB->MaxParameterCount = cpu_to_le16(2); /* BB find exact max SMB PDU from sess structure BB */ diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 0de17c1db60..74c0a282d01 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -346,7 +346,6 @@ int cifs_open(struct inode *inode, struct file *file) struct cifsTconInfo *tcon; struct tcon_link *tlink; struct cifsFileInfo *pCifsFile = NULL; - struct cifsInodeInfo *pCifsInode; char *full_path = NULL; bool posix_open_ok = false; __u16 netfid; @@ -361,8 +360,6 @@ int cifs_open(struct inode *inode, struct file *file) } tcon = tlink_tcon(tlink); - pCifsInode = CIFS_I(file->f_path.dentry->d_inode); - full_path = build_path_from_dentry(file->f_path.dentry); if (full_path == NULL) { rc = -ENOMEM; @@ -1146,7 +1143,6 @@ static int cifs_partialpagewrite(struct page *page, unsigned from, unsigned to) char *write_data; int rc = -EFAULT; int bytes_written = 0; - struct cifs_sb_info *cifs_sb; struct inode *inode; struct cifsFileInfo *open_file; @@ -1154,7 +1150,6 @@ static int cifs_partialpagewrite(struct page *page, unsigned from, unsigned to) return -EFAULT; inode = page->mapping->host; - cifs_sb = CIFS_SB(inode->i_sb); offset += (loff_t)from; write_data = kmap(page); @@ -1667,7 +1662,8 @@ static ssize_t cifs_iovec_write(struct file *file, const struct iovec *iov, unsigned long nr_segs, loff_t *poffset) { - size_t total_written = 0, written = 0; + size_t total_written = 0; + unsigned int written = 0; unsigned long num_pages, npages; size_t copied, len, cur_len, i; struct kvec *to_send; diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c index 7f25cc3d225..f8e4cd2a791 100644 --- a/fs/cifs/readdir.c +++ b/fs/cifs/readdir.c @@ -764,7 +764,6 @@ int cifs_readdir(struct file *file, void *direntry, filldir_t filldir) { int rc = 0; int xid, i; - struct cifs_sb_info *cifs_sb; struct cifsTconInfo *pTcon; struct cifsFileInfo *cifsFile = NULL; char *current_entry; @@ -775,8 +774,6 @@ int cifs_readdir(struct file *file, void *direntry, filldir_t filldir) xid = GetXid(); - cifs_sb = CIFS_SB(file->f_path.dentry->d_sb); - /* * Ensure FindFirst doesn't fail before doing filldir() for '.' and * '..'. Otherwise we won't be able to notify VFS in case of failure. -- cgit v1.2.3-18-g5258 From bed3c1de66d04f9e5efcdfc5b8035f3354c4ffcc Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 30 Jan 2011 10:03:30 -0300 Subject: [media] fix saa7111 non-detection One saa7111 device is reporting a different ID: saa7115 0-0024: chip found @ 0x48 (ID 0f7111d0e111111) does not match a known saa711x chip. As this is for sure a saa7111, change the detection code to also cover this device. Signed-off-by: Russell King Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7115.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c index f35459d1f42..0db90922ee9 100644 --- a/drivers/media/video/saa7115.c +++ b/drivers/media/video/saa7115.c @@ -1565,7 +1565,7 @@ static int saa711x_probe(struct i2c_client *client, chip_id = name[5]; /* Check whether this chip is part of the saa711x series */ - if (memcmp(name, "1f711", 5)) { + if (memcmp(name + 1, "f711", 4)) { v4l_dbg(1, debug, client, "chip found @ 0x%x (ID %s) does not match a known saa711x chip.\n", client->addr << 1, name); return -ENODEV; -- cgit v1.2.3-18-g5258 From 7a8587e7c8e4e32ba778bfbbb822a0a7e8d5f3e3 Mon Sep 17 00:00:00 2001 From: Shirish Pargaonkar Date: Sat, 29 Jan 2011 13:54:58 -0600 Subject: cifs: No need to check crypto blockcipher allocation Missed one change as per earlier suggestion. Signed-off-by: Shirish Pargaonkar Reviewed-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifsencrypt.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c index 0db5f1de022..a51585f9852 100644 --- a/fs/cifs/cifsencrypt.c +++ b/fs/cifs/cifsencrypt.c @@ -657,9 +657,10 @@ calc_seckey(struct cifsSesInfo *ses) get_random_bytes(sec_key, CIFS_SESS_KEY_SIZE); tfm_arc4 = crypto_alloc_blkcipher("ecb(arc4)", 0, CRYPTO_ALG_ASYNC); - if (!tfm_arc4 || IS_ERR(tfm_arc4)) { + if (IS_ERR(tfm_arc4)) { + rc = PTR_ERR(tfm_arc4); cERROR(1, "could not allocate crypto API arc4\n"); - return PTR_ERR(tfm_arc4); + return rc; } desc.tfm = tfm_arc4; -- cgit v1.2.3-18-g5258 From cf4e5c6e8d2b87ae8e61168a7dc860d68c578745 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Mon, 31 Jan 2011 00:12:26 -0700 Subject: dt: Remove obsolete description of powerpc boot interface 32 and 64 bit powerpc support has been merged for a while now, but the booting-without-of.txt document still describes 32 bit as not supporting multiplatform, which is no longer true. This patch fixes the documentation. Also remove references to powerpc-specific details outside of section I in preparation to add details for other architectures. v3: cleaned up a lot more powerpc-isms and updated text to reflect current usage conventions. Signed-off-by: Grant Likely --- Documentation/devicetree/booting-without-of.txt | 165 ++++++++---------------- 1 file changed, 54 insertions(+), 111 deletions(-) diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt index 7400d7555dc..28b1c9d3d35 100644 --- a/Documentation/devicetree/booting-without-of.txt +++ b/Documentation/devicetree/booting-without-of.txt @@ -13,7 +13,6 @@ Table of Contents I - Introduction 1) Entry point for arch/powerpc - 2) Board support II - The DT block format 1) Header @@ -41,13 +40,6 @@ Table of Contents VI - System-on-a-chip devices and nodes 1) Defining child nodes of an SOC 2) Representing devices without a current OF specification - a) PHY nodes - b) Interrupt controllers - c) 4xx/Axon EMAC ethernet nodes - d) Xilinx IP cores - e) USB EHCI controllers - f) MDIO on GPIOs - g) SPI busses VII - Specifying interrupt information for devices 1) interrupts property @@ -123,7 +115,7 @@ Revision Information I - Introduction ================ -During the recent development of the Linux/ppc64 kernel, and more +During the development of the Linux/ppc64 kernel, and more specifically, the addition of new platform types outside of the old IBM pSeries/iSeries pair, it was decided to enforce some strict rules regarding the kernel entry and bootloader <-> kernel interfaces, in @@ -146,7 +138,7 @@ section III, but, for example, the kernel does not require you to create a node for every PCI device in the system. It is a requirement to have a node for PCI host bridges in order to provide interrupt routing informations and memory/IO ranges, among others. It is also -recommended to define nodes for on chip devices and other busses that +recommended to define nodes for on chip devices and other buses that don't specifically fit in an existing OF specification. This creates a great flexibility in the way the kernel can then probe those and match drivers to device, without having to hard code all sorts of tables. It @@ -158,7 +150,7 @@ it with special cases. 1) Entry point for arch/powerpc ------------------------------- - There is one and one single entry point to the kernel, at the start + There is one single entry point to the kernel, at the start of the kernel image. That entry point supports two calling conventions: @@ -210,12 +202,6 @@ it with special cases. with all CPUs. The way to do that with method b) will be described in a later revision of this document. - -2) Board support ----------------- - -64-bit kernels: - Board supports (platforms) are not exclusive config options. An arbitrary set of board supports can be built in a single kernel image. The kernel will "know" what set of functions to use for a @@ -234,48 +220,11 @@ it with special cases. containing the various callbacks that the generic code will use to get to your platform specific code - c) Add a reference to your "ppc_md" structure in the - "machines" table in arch/powerpc/kernel/setup_64.c if you are - a 64-bit platform. - - d) request and get assigned a platform number (see PLATFORM_* - constants in arch/powerpc/include/asm/processor.h - -32-bit embedded kernels: - - Currently, board support is essentially an exclusive config option. - The kernel is configured for a single platform. Part of the reason - for this is to keep kernels on embedded systems small and efficient; - part of this is due to the fact the code is already that way. In the - future, a kernel may support multiple platforms, but only if the + A kernel image may support multiple platforms, but only if the platforms feature the same core architecture. A single kernel build cannot support both configurations with Book E and configurations with classic Powerpc architectures. - 32-bit embedded platforms that are moved into arch/powerpc using a - flattened device tree should adopt the merged tree practice of - setting ppc_md up dynamically, even though the kernel is currently - built with support for only a single platform at a time. This allows - unification of the setup code, and will make it easier to go to a - multiple-platform-support model in the future. - -NOTE: I believe the above will be true once Ben's done with the merge -of the boot sequences.... someone speak up if this is wrong! - - To add a 32-bit embedded platform support, follow the instructions - for 64-bit platforms above, with the exception that the Kconfig - option should be set up such that the kernel builds exclusively for - the platform selected. The processor type for the platform should - enable another config option to select the specific board - supported. - -NOTE: If Ben doesn't merge the setup files, may need to change this to -point to setup_32.c - - - I will describe later the boot process and various callbacks that - your platform should implement. - II - The DT block format ======================== @@ -300,8 +249,8 @@ the block to RAM before passing it to the kernel. 1) Header --------- - The kernel is entered with r3 pointing to an area of memory that is - roughly described in arch/powerpc/include/asm/prom.h by the structure + The kernel is passed the physical address pointing to an area of memory + that is roughly described in include/linux/of_fdt.h by the structure boot_param_header: struct boot_param_header { @@ -339,7 +288,7 @@ struct boot_param_header { All values in this header are in big endian format, the various fields in this header are defined more precisely below. All "offset" values are in bytes from the start of the header; that is - from the value of r3. + from the physical base address of the device tree block. - magic @@ -437,7 +386,7 @@ struct boot_param_header { ------------------------------ - r3 -> | struct boot_param_header | + base -> | struct boot_param_header | ------------------------------ | (alignment gap) (*) | ------------------------------ @@ -457,7 +406,7 @@ struct boot_param_header { -----> ------------------------------ | | - --- (r3 + totalsize) + --- (base + totalsize) (*) The alignment gaps are not necessarily present; their presence and size are dependent on the various alignment requirements of @@ -500,7 +449,7 @@ the device-tree structure. It is typically used to represent "path" in the device-tree. More details about the actual format of these will be below. -The kernel powerpc generic code does not make any formal use of the +The kernel generic code does not make any formal use of the unit address (though some board support code may do) so the only real requirement here for the unit address is to ensure uniqueness of the node unit name at a given level of the tree. Nodes with no notion @@ -518,20 +467,21 @@ path to the root node is "/". Every node which actually represents an actual device (that is, a node which isn't only a virtual "container" for more nodes, like "/cpus" -is) is also required to have a "device_type" property indicating the -type of node . +is) is also required to have a "compatible" property indicating the +specific hardware and an optional list of devices it is fully +backwards compatible with. Finally, every node that can be referenced from a property in another -node is required to have a "linux,phandle" property. Real open -firmware implementations provide a unique "phandle" value for every -node that the "prom_init()" trampoline code turns into -"linux,phandle" properties. However, this is made optional if the -flattened device tree is used directly. An example of a node +node is required to have either a "phandle" or a "linux,phandle" +property. Real Open Firmware implementations provide a unique +"phandle" value for every node that the "prom_init()" trampoline code +turns into "linux,phandle" properties. However, this is made optional +if the flattened device tree is used directly. An example of a node referencing another node via "phandle" is when laying out the interrupt tree which will be described in a further version of this document. -This "linux, phandle" property is a 32-bit value that uniquely +The "phandle" property is a 32-bit value that uniquely identifies a node. You are free to use whatever values or system of values, internal pointers, or whatever to generate these, the only requirement is that every node for which you provide that property has @@ -694,7 +644,7 @@ made of 3 cells, the bottom two containing the actual address itself while the top cell contains address space indication, flags, and pci bus & device numbers. -For busses that support dynamic allocation, it's the accepted practice +For buses that support dynamic allocation, it's the accepted practice to then not provide the address in "reg" (keep it 0) though while providing a flag indicating the address is dynamically allocated, and then, to provide a separate "assigned-addresses" property that @@ -711,7 +661,7 @@ prom_parse.c file of the recent kernels for your bus type. The "reg" property only defines addresses and sizes (if #size-cells is non-0) within a given bus. In order to translate addresses upward (that is into parent bus addresses, and possibly into CPU physical -addresses), all busses must contain a "ranges" property. If the +addresses), all buses must contain a "ranges" property. If the "ranges" property is missing at a given level, it's assumed that translation isn't possible, i.e., the registers are not visible on the parent bus. The format of the "ranges" property for a bus is a list @@ -727,9 +677,9 @@ example, for a PCI host controller, that would be a CPU address. For a PCI<->ISA bridge, that would be a PCI address. It defines the base address in the parent bus where the beginning of that range is mapped. -For a new 64-bit powerpc board, I recommend either the 2/2 format or +For new 64-bit board support, I recommend either the 2/2 format or Apple's 2/1 format which is slightly more compact since sizes usually -fit in a single 32-bit word. New 32-bit powerpc boards should use a +fit in a single 32-bit word. New 32-bit board support should use a 1/1 format, unless the processor supports physical addresses greater than 32-bits, in which case a 2/1 format is recommended. @@ -754,7 +704,7 @@ of their actual names. While earlier users of Open Firmware like OldWorld macintoshes tended to use the actual device name for the "name" property, it's nowadays considered a good practice to use a name that is closer to the device -class (often equal to device_type). For example, nowadays, ethernet +class (often equal to device_type). For example, nowadays, Ethernet controllers are named "ethernet", an additional "model" property defining precisely the chip type/model, and "compatible" property defining the family in case a single driver can driver more than one @@ -772,7 +722,7 @@ is present). 4) Note about node and property names and character set ------------------------------------------------------- -While open firmware provides more flexible usage of 8859-1, this +While Open Firmware provides more flexible usage of 8859-1, this specification enforces more strict rules. Nodes and properties should be comprised only of ASCII characters 'a' to 'z', '0' to '9', ',', '.', '_', '+', '#', '?', and '-'. Node names additionally @@ -792,7 +742,7 @@ address which can extend beyond that limit. -------------------------------- These are all that are currently required. However, it is strongly recommended that you expose PCI host bridges as documented in the - PCI binding to open firmware, and your interrupt tree as documented + PCI binding to Open Firmware, and your interrupt tree as documented in OF interrupt tree specification. a) The root node @@ -802,20 +752,12 @@ address which can extend beyond that limit. - model : this is your board name/model - #address-cells : address representation for "root" devices - #size-cells: the size representation for "root" devices - - device_type : This property shouldn't be necessary. However, if - you decide to create a device_type for your root node, make sure it - is _not_ "chrp" unless your platform is a pSeries or PAPR compliant - one for 64-bit, or a CHRP-type machine for 32-bit as this will - matched by the kernel this way. - - Additionally, some recommended properties are: - - compatible : the board "family" generally finds its way here, for example, if you have 2 board models with a similar layout, that typically get driven by the same platform code in the - kernel, you would use a different "model" property but put a - value in "compatible". The kernel doesn't directly use that - value but it is generally useful. + kernel, you would specify the exact board model in the + compatible property followed by an entry that represents the SoC + model. The root node is also generally where you add additional properties specific to your board like the serial number if any, that sort of @@ -841,8 +783,11 @@ address which can extend beyond that limit. So under /cpus, you are supposed to create a node for every CPU on the machine. There is no specific restriction on the name of the - CPU, though It's common practice to call it PowerPC,. For + CPU, though it's common to call it ,. For example, Apple uses PowerPC,G5 while IBM uses PowerPC,970FX. + However, the Generic Names convention suggests that it would be + better to simply use 'cpu' for each cpu node and use the compatible + property to identify the specific cpu core. Required properties: @@ -923,7 +868,7 @@ compatibility. e) The /chosen node - This node is a bit "special". Normally, that's where open firmware + This node is a bit "special". Normally, that's where Open Firmware puts some variable environment information, like the arguments, or the default input/output devices. @@ -940,11 +885,7 @@ compatibility. console device if any. Typically, if you have serial devices on your board, you may want to put the full path to the one set as the default console in the firmware here, for the kernel to pick - it up as its own default console. If you look at the function - set_preferred_console() in arch/ppc64/kernel/setup.c, you'll see - that the kernel tries to find out the default console and has - knowledge of various types like 8250 serial ports. You may want - to extend this function to add your own. + it up as its own default console. Note that u-boot creates and fills in the chosen node for platforms that use it. @@ -955,23 +896,23 @@ compatibility. f) the /soc node - This node is used to represent a system-on-a-chip (SOC) and must be - present if the processor is a SOC. The top-level soc node contains - information that is global to all devices on the SOC. The node name - should contain a unit address for the SOC, which is the base address - of the memory-mapped register set for the SOC. The name of an soc + This node is used to represent a system-on-a-chip (SoC) and must be + present if the processor is a SoC. The top-level soc node contains + information that is global to all devices on the SoC. The node name + should contain a unit address for the SoC, which is the base address + of the memory-mapped register set for the SoC. The name of an SoC node should start with "soc", and the remainder of the name should represent the part number for the soc. For example, the MPC8540's soc node would be called "soc8540". Required properties: - - device_type : Should be "soc" - ranges : Should be defined as specified in 1) to describe the - translation of SOC addresses for memory mapped SOC registers. - - bus-frequency: Contains the bus frequency for the SOC node. + translation of SoC addresses for memory mapped SoC registers. + - bus-frequency: Contains the bus frequency for the SoC node. Typically, the value of this field is filled in by the boot loader. + - compatible : Exact model of the SoC Recommended properties: @@ -1155,12 +1096,13 @@ while all this has been defined and implemented. - An example of code for iterating nodes & retrieving properties directly from the flattened tree format can be found in the kernel - file arch/ppc64/kernel/prom.c, look at scan_flat_dt() function, + file drivers/of/fdt.c. Look at the of_scan_flat_dt() function, its usage in early_init_devtree(), and the corresponding various early_init_dt_scan_*() callbacks. That code can be re-used in a GPL bootloader, and as the author of that code, I would be happy to discuss possible free licensing to any vendor who wishes to integrate all or part of this code into a non-GPL bootloader. + (reference needed; who is 'I' here? ---gcl Jan 31, 2011) @@ -1203,18 +1145,19 @@ MPC8540. 2) Representing devices without a current OF specification ---------------------------------------------------------- -Currently, there are many devices on SOCs that do not have a standard -representation pre-defined as part of the open firmware -specifications, mainly because the boards that contain these SOCs are -not currently booted using open firmware. This section contains -descriptions for the SOC devices for which new nodes have been -defined; this list will expand as more and more SOC-containing -platforms are moved over to use the flattened-device-tree model. +Currently, there are many devices on SoCs that do not have a standard +representation defined as part of the Open Firmware specifications, +mainly because the boards that contain these SoCs are not currently +booted using Open Firmware. Binding documentation for new devices +should be added to the Documentation/devicetree/bindings directory. +That directory will expand as device tree support is added to more and +more SoCs. + VII - Specifying interrupt information for devices =================================================== -The device tree represents the busses and devices of a hardware +The device tree represents the buses and devices of a hardware system in a form similar to the physical bus topology of the hardware. -- cgit v1.2.3-18-g5258 From 9b00b4157f7b3265de291ac8979a5f1611ce64ab Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Sun, 30 Jan 2011 11:29:47 +0100 Subject: wl12xx: fix use after free When DEBUG_SPI is included in the debug log level wl1271_spi_reset() will dump the already freed memory instead of the SPI buffer. This bug was spotted by the semantic patch tool coccinelle using the script found at scripts/coccinelle/free/kfree.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Mathias Krause Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/spi.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/wireless/wl12xx/spi.c b/drivers/net/wireless/wl12xx/spi.c index 46714910f98..7145ea54378 100644 --- a/drivers/net/wireless/wl12xx/spi.c +++ b/drivers/net/wireless/wl12xx/spi.c @@ -110,9 +110,8 @@ static void wl1271_spi_reset(struct wl1271 *wl) spi_message_add_tail(&t, &m); spi_sync(wl_to_spi(wl), &m); - kfree(cmd); - wl1271_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN); + kfree(cmd); } static void wl1271_spi_init(struct wl1271 *wl) -- cgit v1.2.3-18-g5258 From 9830fcd6f6a4781d8b46d2b35c13b39f30915c63 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Mon, 31 Jan 2011 00:09:58 -0700 Subject: dt: add documentation of ARM dt boot interface v3: added details to Documentation/arm/Booting Signed-off-by: Grant Likely --- Documentation/arm/Booting | 33 +++++++++++++++++--- Documentation/devicetree/booting-without-of.txt | 40 +++++++++++++++++++++++++ 2 files changed, 69 insertions(+), 4 deletions(-) diff --git a/Documentation/arm/Booting b/Documentation/arm/Booting index 76850295af8..4e686a2ed91 100644 --- a/Documentation/arm/Booting +++ b/Documentation/arm/Booting @@ -65,13 +65,19 @@ looks at the connected hardware is beyond the scope of this document. The boot loader must ultimately be able to provide a MACH_TYPE_xxx value to the kernel. (see linux/arch/arm/tools/mach-types). - -4. Setup the kernel tagged list -------------------------------- +4. Setup boot data +------------------ Existing boot loaders: OPTIONAL, HIGHLY RECOMMENDED New boot loaders: MANDATORY +The boot loader must provide either a tagged list or a dtb image for +passing configuration data to the kernel. The physical address of the +boot data is passed to the kernel in register r2. + +4a. Setup the kernel tagged list +-------------------------------- + The boot loader must create and initialise the kernel tagged list. A valid tagged list starts with ATAG_CORE and ends with ATAG_NONE. The ATAG_CORE tag may or may not be empty. An empty ATAG_CORE tag @@ -101,6 +107,24 @@ The tagged list must be placed in a region of memory where neither the kernel decompressor nor initrd 'bootp' program will overwrite it. The recommended placement is in the first 16KiB of RAM. +4b. Setup the device tree +------------------------- + +The boot loader must load a device tree image (dtb) into system ram +at a 64bit aligned address and initialize it with the boot data. The +dtb format is documented in Documentation/devicetree/booting-without-of.txt. +The kernel will look for the dtb magic value of 0xd00dfeed at the dtb +physical address to determine if a dtb has been passed instead of a +tagged list. + +The boot loader must pass at a minimum the size and location of the +system memory, and the root filesystem location. The dtb must be +placed in a region of memory where the kernel decompressor will not +overwrite it. The recommended placement is in the first 16KiB of RAM +with the caveat that it may not be located at physical address 0 since +the kernel interprets a value of 0 in r2 to mean neither a tagged list +nor a dtb were passed. + 5. Calling the kernel image --------------------------- @@ -125,7 +149,8 @@ In either case, the following conditions must be met: - CPU register settings r0 = 0, r1 = machine type number discovered in (3) above. - r2 = physical address of tagged list in system RAM. + r2 = physical address of tagged list in system RAM, or + physical address of device tree block (dtb) in system RAM - CPU mode All forms of interrupts must be disabled (IRQs and FIQs) diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt index 28b1c9d3d35..9381a148102 100644 --- a/Documentation/devicetree/booting-without-of.txt +++ b/Documentation/devicetree/booting-without-of.txt @@ -13,6 +13,7 @@ Table of Contents I - Introduction 1) Entry point for arch/powerpc + 2) Entry point for arch/arm II - The DT block format 1) Header @@ -225,6 +226,45 @@ it with special cases. cannot support both configurations with Book E and configurations with classic Powerpc architectures. +2) Entry point for arch/arm +--------------------------- + + There is one single entry point to the kernel, at the start + of the kernel image. That entry point supports two calling + conventions. A summary of the interface is described here. A full + description of the boot requirements is documented in + Documentation/arm/Booting + + a) ATAGS interface. Minimal information is passed from firmware + to the kernel with a tagged list of predefined parameters. + + r0 : 0 + + r1 : Machine type number + + r2 : Physical address of tagged list in system RAM + + b) Entry with a flattened device-tree block. Firmware loads the + physical address of the flattened device tree block (dtb) into r2, + r1 is not used, but it is considered good practise to use a valid + machine number as described in Documentation/arm/Booting. + + r0 : 0 + + r1 : Valid machine type number. When using a device tree, + a single machine type number will often be assigned to + represent a class or family of SoCs. + + r2 : physical pointer to the device-tree block + (defined in chapter II) in RAM. Device tree can be located + anywhere in system RAM, but it should be aligned on a 32 bit + boundary. + + The kernel will differentiate between ATAGS and device tree booting by + reading the memory pointed to by r1 and looking for either the flattened + device tree block magic value (0xd00dfeed) or the ATAG_CORE value at + offset 0x4 from r2 (0x54410001). + II - The DT block format ======================== -- cgit v1.2.3-18-g5258 From ec831ea72ee5d7d473899e27a86bd659482c4d0d Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 31 Jan 2011 13:16:00 -0800 Subject: net: Add default_mtu() methods to blackhole dst_ops When an IPSEC SA is still being set up, __xfrm_lookup() will return -EREMOTE and so ip_route_output_flow() will return a blackhole route. This can happen in a sndmsg call, and after d33e455337ea ("net: Abstract default MTU metric calculation behind an accessor.") this leads to a crash in ip_append_data() because the blackhole dst_ops have no default_mtu() method and so dst_mtu() calls a NULL pointer. Fix this by adding default_mtu() methods (that simply return 0, matching the old behavior) to the blackhole dst_ops. The IPv4 part of this patch fixes a crash that I saw when using an IPSEC VPN; the IPv6 part is untested because I don't have an IPv6 VPN, but it looks to be needed as well. Signed-off-by: Roland Dreier Signed-off-by: David S. Miller --- net/ipv4/route.c | 6 ++++++ net/ipv6/route.c | 6 ++++++ 2 files changed, 12 insertions(+) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 351dc4e8524..788a3e74834 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -2707,6 +2707,11 @@ static struct dst_entry *ipv4_blackhole_dst_check(struct dst_entry *dst, u32 coo return NULL; } +static unsigned int ipv4_blackhole_default_mtu(const struct dst_entry *dst) +{ + return 0; +} + static void ipv4_rt_blackhole_update_pmtu(struct dst_entry *dst, u32 mtu) { } @@ -2716,6 +2721,7 @@ static struct dst_ops ipv4_dst_blackhole_ops = { .protocol = cpu_to_be16(ETH_P_IP), .destroy = ipv4_dst_destroy, .check = ipv4_blackhole_dst_check, + .default_mtu = ipv4_blackhole_default_mtu, .update_pmtu = ipv4_rt_blackhole_update_pmtu, }; diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 28a85fc63cb..1c29f95695d 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -113,6 +113,11 @@ static struct dst_ops ip6_dst_ops_template = { .local_out = __ip6_local_out, }; +static unsigned int ip6_blackhole_default_mtu(const struct dst_entry *dst) +{ + return 0; +} + static void ip6_rt_blackhole_update_pmtu(struct dst_entry *dst, u32 mtu) { } @@ -122,6 +127,7 @@ static struct dst_ops ip6_dst_blackhole_ops = { .protocol = cpu_to_be16(ETH_P_IPV6), .destroy = ip6_dst_destroy, .check = ip6_dst_check, + .default_mtu = ip6_blackhole_default_mtu, .update_pmtu = ip6_rt_blackhole_update_pmtu, }; -- cgit v1.2.3-18-g5258 From cc09b5f6466528867b280f6eb4077311aa099588 Mon Sep 17 00:00:00 2001 From: Chuck Ebbert Date: Mon, 31 Jan 2011 05:44:07 +0000 Subject: CAN: softing driver depends on IOMEM Without this dependency the softing driver will be buildable on s390, where it fails. Signed-Off-By: Chuck Ebbert Acked-by: Kurt Van Dijck Signed-off-by: David S. Miller --- drivers/net/can/softing/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/can/softing/Kconfig b/drivers/net/can/softing/Kconfig index 92bd6bdde5e..8ba81b3ddd9 100644 --- a/drivers/net/can/softing/Kconfig +++ b/drivers/net/can/softing/Kconfig @@ -1,6 +1,6 @@ config CAN_SOFTING tristate "Softing Gmbh CAN generic support" - depends on CAN_DEV + depends on CAN_DEV && HAS_IOMEM ---help--- Support for CAN cards from Softing Gmbh & some cards from Vector Gmbh. -- cgit v1.2.3-18-g5258 From b1953bcec95c189b1eea690a08e89646d7750bda Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 21 Jan 2011 21:10:01 +0000 Subject: Btrfs: make shrink_delalloc a little friendlier Xfstests 224 will just sit there and spin for ever until eventually we give up flushing delalloc and exit. On my box this took several hours. I could not interrupt this process either, even though we use INTERRUPTIBLE. So do 2 things 1) Keep us from looping over and over again without reclaiming anything 2) If we get interrupted exit the loop I tested this and the test now exits in a reasonable amount of time, and can be interrupted with ctrl+c. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index ff6bbfd75cf..f96641a93fc 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -3345,8 +3345,10 @@ static int shrink_delalloc(struct btrfs_trans_handle *trans, u64 reserved; u64 max_reclaim; u64 reclaimed = 0; + long time_left; int pause = 1; int nr_pages = (2 * 1024 * 1024) >> PAGE_CACHE_SHIFT; + int loops = 0; block_rsv = &root->fs_info->delalloc_block_rsv; space_info = block_rsv->space_info; @@ -3359,7 +3361,7 @@ static int shrink_delalloc(struct btrfs_trans_handle *trans, max_reclaim = min(reserved, to_reclaim); - while (1) { + while (loops < 1024) { /* have the flusher threads jump in and do some IO */ smp_mb(); nr_pages = min_t(unsigned long, nr_pages, @@ -3367,8 +3369,12 @@ static int shrink_delalloc(struct btrfs_trans_handle *trans, writeback_inodes_sb_nr_if_idle(root->fs_info->sb, nr_pages); spin_lock(&space_info->lock); - if (reserved > space_info->bytes_reserved) + if (reserved > space_info->bytes_reserved) { + loops = 0; reclaimed += reserved - space_info->bytes_reserved; + } else { + loops++; + } reserved = space_info->bytes_reserved; spin_unlock(&space_info->lock); @@ -3379,7 +3385,12 @@ static int shrink_delalloc(struct btrfs_trans_handle *trans, return -EAGAIN; __set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(pause); + time_left = schedule_timeout(pause); + + /* We were interrupted, exit */ + if (time_left) + break; + pause <<= 1; if (pause > HZ / 10) pause = HZ / 10; -- cgit v1.2.3-18-g5258 From b31eabd86eb68d3c217e6821078249bc045e698a Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Mon, 31 Jan 2011 16:48:24 -0500 Subject: Btrfs: catch errors from btrfs_sync_log btrfs_sync_log returns -EAGAIN when we need full transaction commits instead of small log commits, but sometimes we were dropping the return value. In practice, we check for this a few different ways, but this is still a bug that can leave off full log commits when we really need them. Signed-off-by: Chris Mason --- fs/btrfs/tree-log.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index c25a41d8611..42dfc307704 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -2051,6 +2051,7 @@ int btrfs_sync_log(struct btrfs_trans_handle *trans, wait_log_commit(trans, log_root_tree, log_root_tree->log_transid); mutex_unlock(&log_root_tree->log_mutex); + ret = 0; goto out; } atomic_set(&log_root_tree->log_commit[index2], 1); @@ -2115,7 +2116,7 @@ out: smp_mb(); if (waitqueue_active(&root->log_commit_wait[index1])) wake_up(&root->log_commit_wait[index1]); - return 0; + return ret; } static void free_log_tree(struct btrfs_trans_handle *trans, -- cgit v1.2.3-18-g5258 From e98ff0f55a0232b578c9aa7f1c245868277ac7bc Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 30 Jan 2011 16:40:20 +0000 Subject: ARM: smp_on_up: allow non-ARM SMP processors Allow non-ARM SMP processors to use the SMP_ON_UP feature. CPUs supporting SMP must have the new CPU ID format, so check for this first. Then check for ARM11MPCore, which fails the MPIDR check. Lastly check the MPIDR reports multiprocessing extensions and that the CPU is part of a multiprocessing system. Cc: Reported-and-Tested-by: Stephen Boyd Acked-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/head.S | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index f17d9a09e8f..c0225da3fb2 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -392,24 +392,22 @@ ENDPROC(__turn_mmu_on) #ifdef CONFIG_SMP_ON_UP __fixup_smp: - mov r4, #0x00070000 - orr r3, r4, #0xff000000 @ mask 0xff070000 - orr r4, r4, #0x41000000 @ val 0x41070000 - and r0, r9, r3 - teq r0, r4 @ ARM CPU and ARMv6/v7? + and r3, r9, #0x000f0000 @ architecture version + teq r3, #0x000f0000 @ CPU ID supported? bne __fixup_smp_on_up @ no, assume UP - orr r3, r3, #0x0000ff00 - orr r3, r3, #0x000000f0 @ mask 0xff07fff0 + bic r3, r9, #0x00ff0000 + bic r3, r3, #0x0000000f @ mask 0xff00fff0 + mov r4, #0x41000000 orr r4, r4, #0x0000b000 - orr r4, r4, #0x00000020 @ val 0x4107b020 - and r0, r9, r3 - teq r0, r4 @ ARM 11MPCore? + orr r4, r4, #0x00000020 @ val 0x4100b020 + teq r3, r4 @ ARM 11MPCore? moveq pc, lr @ yes, assume SMP mrc p15, 0, r0, c0, c0, 5 @ read MPIDR - tst r0, #1 << 31 - movne pc, lr @ bit 31 => SMP + and r0, r0, #0xc0000000 @ multiprocessing extensions and + teq r0, #0x80000000 @ not part of a uniprocessor system? + moveq pc, lr @ yes, assume SMP __fixup_smp_on_up: adr r0, 1f -- cgit v1.2.3-18-g5258 From cab6958da0094e36a098751f844409fc9ee26251 Mon Sep 17 00:00:00 2001 From: Steve French Date: Mon, 31 Jan 2011 21:56:35 +0000 Subject: [CIFS] Update cifs minor version Signed-off-by: Steve French --- fs/cifs/cifsfs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h index 14789a97304..4a3330235d5 100644 --- a/fs/cifs/cifsfs.h +++ b/fs/cifs/cifsfs.h @@ -127,5 +127,5 @@ extern long cifs_ioctl(struct file *filep, unsigned int cmd, unsigned long arg); extern const struct export_operations cifs_export_ops; #endif /* EXPERIMENTAL */ -#define CIFS_VERSION "1.69" +#define CIFS_VERSION "1.70" #endif /* _CIFSFS_H */ -- cgit v1.2.3-18-g5258 From 2426ec8fe78884272a12a0a0f38b008a6195f094 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Mon, 31 Jan 2011 16:46:20 +1030 Subject: virtio: update MAINTAINERS Patches should keep coming through Rusty but it helps if I'm Cc'd as well. Signed-off-by: Michael S. Tsirkin Signed-off-by: Rusty Russell Signed-off-by: Linus Torvalds --- MAINTAINERS | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 100198ea76b..445537d46e7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6600,6 +6600,16 @@ S: Maintained F: drivers/char/virtio_console.c F: include/linux/virtio_console.h +VIRTIO CORE, NET AND BLOCK DRIVERS +M: Rusty Russell +M: "Michael S. Tsirkin" +L: virtualization@lists.linux-foundation.org +S: Maintained +F: drivers/virtio/ +F: drivers/net/virtio_net.c +F: drivers/block/virtio_blk.c +F: include/linux/virtio_*.h + VIRTIO HOST (VHOST) M: "Michael S. Tsirkin" L: kvm@vger.kernel.org -- cgit v1.2.3-18-g5258 From ffbbf2da9e578dc7b7ae4f945412c4b74f54b20e Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 31 Jan 2011 09:29:14 -0800 Subject: kernel.h: fix kernel-doc warning Fix kernel-doc warning in kernel.h from commit 7ef88ad56145 ("BUILD_BUG_ON: make it handle more cases"): Warning(include/linux/kernel.h:605): No description found for parameter 'condition' Warning(include/linux/kernel.h:605): Excess function parameter 'cond' description in 'BUILD_BUG_ON' Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- include/linux/kernel.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/kernel.h b/include/linux/kernel.h index e2f4d6af212..2fe6e84894a 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -588,7 +588,7 @@ struct sysinfo { /** * BUILD_BUG_ON - break compile if a condition is true. - * @cond: the condition which the compiler should know is false. + * @condition: the condition which the compiler should know is false. * * If you have some code which relies on certain constants being equal, or * other compile-time-evaluated condition, you should use BUILD_BUG_ON to -- cgit v1.2.3-18-g5258 From 6284644e8de1f4005166c918c3d2aa4c510ab9f6 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Mon, 31 Jan 2011 09:14:17 -0500 Subject: cifs: fix length checks in checkSMB The cERROR message in checkSMB when the calculated length doesn't match the RFC1001 length is incorrect in many cases. It always says that the RFC1001 length is bigger than the SMB, even when it's actually the reverse. Fix the error message to say the reverse of what it does now when the SMB length goes beyond the end of the received data. Also, clarify the error message when the RFC length is too big. Finally, clarify the comments to show that the 512 byte limit on extra data at the end of the packet is arbitrary. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/misc.c | 33 +++++++++++++++++---------------- 1 file changed, 17 insertions(+), 16 deletions(-) diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c index 24f0a9d97ad..2a930a752a7 100644 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -478,25 +478,26 @@ checkSMB(struct smb_hdr *smb, __u16 mid, unsigned int length) if (((4 + len) & 0xFFFF) == (clc_len & 0xFFFF)) return 0; /* bcc wrapped */ } - cFYI(1, "Calculated size %d vs length %d mismatch for mid %d", + cFYI(1, "Calculated size %u vs length %u mismatch for mid=%u", clc_len, 4 + len, smb->Mid); - /* Windows XP can return a few bytes too much, presumably - an illegal pad, at the end of byte range lock responses - so we allow for that three byte pad, as long as actual - received length is as long or longer than calculated length */ - /* We have now had to extend this more, since there is a - case in which it needs to be bigger still to handle a - malformed response to transact2 findfirst from WinXP when - access denied is returned and thus bcc and wct are zero - but server says length is 0x21 bytes too long as if the server - forget to reset the smb rfc1001 length when it reset the - wct and bcc to minimum size and drop the t2 parms and data */ - if ((4+len > clc_len) && (len <= clc_len + 512)) - return 0; - else { - cERROR(1, "RFC1001 size %d bigger than SMB for Mid=%d", + + if (4 + len < clc_len) { + cERROR(1, "RFC1001 size %u smaller than SMB for mid=%u", len, smb->Mid); return 1; + } else if (len > clc_len + 512) { + /* + * Some servers (Windows XP in particular) send more + * data than the lengths in the SMB packet would + * indicate on certain calls (byte range locks and + * trans2 find first calls in particular). While the + * client can handle such a frame by ignoring the + * trailing data, we choose limit the amount of extra + * data to 512 bytes. + */ + cERROR(1, "RFC1001 size %u more than 512 bytes larger " + "than SMB for mid=%u", len, smb->Mid); + return 1; } } return 0; -- cgit v1.2.3-18-g5258 From 8587523640441a9ff2564ebc6efeb39497ad6709 Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Mon, 31 Jan 2011 16:23:42 -0800 Subject: net: Check rps_flow_table when RPS map length is 1 In get_rps_cpu, add check that the rps_flow_table for the device is NULL when trying to take fast path when RPS map length is one. Without this, RFS is effectively disabled if map length is one which is not correct. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller --- net/core/dev.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/core/dev.c b/net/core/dev.c index 93e44dbf679..4c907895876 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2563,7 +2563,8 @@ static int get_rps_cpu(struct net_device *dev, struct sk_buff *skb, map = rcu_dereference(rxqueue->rps_map); if (map) { - if (map->len == 1) { + if (map->len == 1 && + !rcu_dereference_raw(rxqueue->rps_flow_table)) { tcpu = map->cpus[0]; if (cpu_online(tcpu)) cpu = tcpu; -- cgit v1.2.3-18-g5258 From c87fb6fdcaf7560940b31a0c78c3e6370e3433cf Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Mon, 31 Jan 2011 19:54:59 -0500 Subject: Btrfs: avoid uninit variable warnings in ordered-data.c This one isn't really an uninit variable, but for pretty obscure reasons. Let's make it clearly correct. Signed-off-by: Chris Mason --- fs/btrfs/ordered-data.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/ordered-data.c b/fs/btrfs/ordered-data.c index 2b61e1ddcd9..083a5547737 100644 --- a/fs/btrfs/ordered-data.c +++ b/fs/btrfs/ordered-data.c @@ -141,7 +141,7 @@ static inline struct rb_node *tree_search(struct btrfs_ordered_inode_tree *tree, u64 file_offset) { struct rb_root *root = &tree->tree; - struct rb_node *prev; + struct rb_node *prev = NULL; struct rb_node *ret; struct btrfs_ordered_extent *entry; -- cgit v1.2.3-18-g5258 From ebf53826e105f488f4f628703a108e98940d1dc5 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 1 Feb 2011 13:05:49 +1000 Subject: Linux 2.6.38-rc3 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 1f474953427..66e7e977ddc 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 38 -EXTRAVERSION = -rc2 +EXTRAVERSION = -rc3 NAME = Flesh-Eating Bats with Fangs # *DOCUMENTATION* -- cgit v1.2.3-18-g5258 From 785e8cc39baf31d5c18a2d198ded03a003c9c190 Mon Sep 17 00:00:00 2001 From: Ken Kawasaki Date: Sun, 30 Jan 2011 11:16:16 +0000 Subject: axnet_cs: reduce delay time at ei_rx_overrun axnet_cs: mdelay of 10ms is too long at ei_rx_overrun. It should be reduced to 2ms. Signed-off-by: Ken Kawasaki Signed-off-by: David S. Miller --- drivers/net/pcmcia/axnet_cs.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index 1f42f6ac855..d3cb7720586 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -1488,12 +1488,10 @@ static void ei_rx_overrun(struct net_device *dev) /* * Wait a full Tx time (1.2ms) + some guard time, NS says 1.6ms total. - * Early datasheets said to poll the reset bit, but now they say that - * it "is not a reliable indicator and subsequently should be ignored." - * We wait at least 10ms. + * We wait at least 2ms. */ - mdelay(10); + mdelay(2); /* * Reset RBCR[01] back to zero as per magic incantation. -- cgit v1.2.3-18-g5258 From bf36076a67db6d7423d09d861a072337866f0dd9 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Mon, 31 Jan 2011 20:54:17 -0800 Subject: net: Fix ipv6 neighbour unregister_sysctl_table warning In my testing of 2.6.37 I was occassionally getting a warning about sysctl table entries being unregistered in the wrong order. Digging in it turns out this dates back to the last great sysctl reorg done where Al Viro introduced the requirement that sysctl directories needed to be created before and destroyed after the files in them. It turns out that in that great reorg /proc/sys/net/ipv6/neigh was overlooked. So this patch fixes that oversight and makes an annoying warning message go away. >------------[ cut here ]------------ >WARNING: at kernel/sysctl.c:1992 unregister_sysctl_table+0x134/0x164() >Pid: 23951, comm: kworker/u:3 Not tainted 2.6.37-350888.2010AroraKernelBeta.fc14.x86_64 #1 >Call Trace: > [] warn_slowpath_common+0x80/0x98 > [] warn_slowpath_null+0x15/0x17 > [] unregister_sysctl_table+0x134/0x164 > [] ? kfree+0xc4/0xd1 > [] neigh_sysctl_unregister+0x22/0x3a > [] addrconf_ifdown+0x33f/0x37b [ipv6] > [] ? skb_dequeue+0x5f/0x6b > [] addrconf_notify+0x69b/0x75c [ipv6] > [] ? ip6mr_device_event+0x98/0xa9 [ipv6] > [] notifier_call_chain+0x32/0x5e > [] raw_notifier_call_chain+0xf/0x11 > [] call_netdevice_notifiers+0x45/0x4a > [] rollback_registered_many+0x118/0x201 > [] unregister_netdevice_many+0x16/0x6d > [] default_device_exit_batch+0xa4/0xb8 > [] ? cleanup_net+0x0/0x194 > [] ops_exit_list+0x4e/0x56 > [] cleanup_net+0xf4/0x194 > [] process_one_work+0x187/0x280 > [] worker_thread+0xff/0x19f > [] ? worker_thread+0x0/0x19f > [] kthread+0x7d/0x85 > [] kernel_thread_helper+0x4/0x10 > [] ? kthread+0x0/0x85 > [] ? kernel_thread_helper+0x0/0x10 >---[ end trace 8a7e9310b35e9486 ]--- Signed-off-by: Eric W. Biederman Signed-off-by: David S. Miller --- net/ipv6/sysctl_net_ipv6.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/net/ipv6/sysctl_net_ipv6.c b/net/ipv6/sysctl_net_ipv6.c index fa1d8f4e005..7cb65ef79f9 100644 --- a/net/ipv6/sysctl_net_ipv6.c +++ b/net/ipv6/sysctl_net_ipv6.c @@ -15,6 +15,8 @@ #include #include +static struct ctl_table empty[1]; + static ctl_table ipv6_table_template[] = { { .procname = "route", @@ -35,6 +37,12 @@ static ctl_table ipv6_table_template[] = { .mode = 0644, .proc_handler = proc_dointvec }, + { + .procname = "neigh", + .maxlen = 0, + .mode = 0555, + .child = empty, + }, { } }; @@ -152,7 +160,6 @@ static struct ctl_table_header *ip6_base; int ipv6_static_sysctl_register(void) { - static struct ctl_table empty[1]; ip6_base = register_sysctl_paths(net_ipv6_ctl_path, empty); if (ip6_base == NULL) return -ENOMEM; -- cgit v1.2.3-18-g5258 From fca540ab5f4718c6133f71f7be1793066008bf89 Mon Sep 17 00:00:00 2001 From: Stefan Weil Date: Mon, 31 Jan 2011 20:56:54 -0800 Subject: enc28j60: Fix reading of transmit status vector This error was reported by cppcheck: drivers/net/enc28j60.c:815: error: Using sizeof for array given as function argument returns the size of pointer. The original code reads 4 or 8 bytes instead of TSV_SIZE (= 100) bytes. I just fixed the code, but did not run any tests. Signed-off-by: Stefan Weil Signed-off-by: David S. Miller --- drivers/net/enc28j60.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c index 112c5aa9af7..907b05a1c65 100644 --- a/drivers/net/enc28j60.c +++ b/drivers/net/enc28j60.c @@ -812,7 +812,7 @@ static void enc28j60_read_tsv(struct enc28j60_net *priv, u8 tsv[TSV_SIZE]) if (netif_msg_hw(priv)) printk(KERN_DEBUG DRV_NAME ": reading TSV at addr:0x%04x\n", endptr + 1); - enc28j60_mem_read(priv, endptr + 1, sizeof(tsv), tsv); + enc28j60_mem_read(priv, endptr + 1, TSV_SIZE, tsv); } static void enc28j60_dump_tsv(struct enc28j60_net *priv, const char *msg, -- cgit v1.2.3-18-g5258 From 28a1bc1c0a5a15e72afae1050b227761227b6af2 Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Mon, 31 Jan 2011 21:06:38 -0800 Subject: Input: wacom_w8001 - report resolution to userland Serial devices send both pen and touch data through the same logical port. Since we scaled touch to pen maximum, we use pen resolution for touch as well here. This is under the assumption that pen and touch share the same physical surface. In the case when a small physical dimensional difference occurs between pen and touch, we assume the tolerance for touch point precision is higher than pen and the difference is within touch point tolerance. A per-MT tool based resolution mechanism should be introduced if the above assumption does not hold true for the pen and touch devices any more. Signed-off-by: Ping Cheng Reviewed-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/wacom_w8001.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c index 5cb8449c909..c14412ef464 100644 --- a/drivers/input/touchscreen/wacom_w8001.c +++ b/drivers/input/touchscreen/wacom_w8001.c @@ -51,6 +51,10 @@ MODULE_LICENSE("GPL"); #define W8001_PKTLEN_TPCCTL 11 /* control packet */ #define W8001_PKTLEN_TOUCH2FG 13 +/* resolution in points/mm */ +#define W8001_PEN_RESOLUTION 100 +#define W8001_TOUCH_RESOLUTION 10 + struct w8001_coord { u8 rdy; u8 tsw; @@ -198,7 +202,7 @@ static void parse_touchquery(u8 *data, struct w8001_touch_query *query) query->y = 1024; if (query->panel_res) query->x = query->y = (1 << query->panel_res); - query->panel_res = 10; + query->panel_res = W8001_TOUCH_RESOLUTION; } } @@ -394,6 +398,8 @@ static int w8001_setup(struct w8001 *w8001) input_set_abs_params(dev, ABS_X, 0, coord.x, 0, 0); input_set_abs_params(dev, ABS_Y, 0, coord.y, 0, 0); + input_abs_set_res(dev, ABS_X, W8001_PEN_RESOLUTION); + input_abs_set_res(dev, ABS_Y, W8001_PEN_RESOLUTION); input_set_abs_params(dev, ABS_PRESSURE, 0, coord.pen_pressure, 0, 0); if (coord.tilt_x && coord.tilt_y) { input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0); @@ -418,14 +424,17 @@ static int w8001_setup(struct w8001 *w8001) w8001->max_touch_x = touch.x; w8001->max_touch_y = touch.y; - /* scale to pen maximum */ if (w8001->max_pen_x && w8001->max_pen_y) { + /* if pen is supported scale to pen maximum */ touch.x = w8001->max_pen_x; touch.y = w8001->max_pen_y; + touch.panel_res = W8001_PEN_RESOLUTION; } input_set_abs_params(dev, ABS_X, 0, touch.x, 0, 0); input_set_abs_params(dev, ABS_Y, 0, touch.y, 0, 0); + input_abs_set_res(dev, ABS_X, touch.panel_res); + input_abs_set_res(dev, ABS_Y, touch.panel_res); switch (touch.sensor_id) { case 0: -- cgit v1.2.3-18-g5258 From 1e1dbb259c79b38a542c1c4c00fd8dfe936b183b Mon Sep 17 00:00:00 2001 From: Javi Merino Date: Mon, 31 Jan 2011 23:11:36 +0000 Subject: sched, docs: Update schedstats documentation to version 15 Version 15 of schedstats was introduced in: 67aa0f767af4: sched: remove unused fields from struct rq and removed three unused counters in sched_yield(). Update the documentation. Signed-off-by: Javi Merino Cc: henrix@sapo.pt Cc: rdunlap@xenotime.net Cc: Peter Zijlstra Cc: Mike Galbraith LKML-Reference: <1296515496-8229-1-git-send-email-cibervicho@gmail.com> Signed-off-by: Ingo Molnar --- Documentation/scheduler/sched-stats.txt | 33 +++++++++++++++------------------ 1 file changed, 15 insertions(+), 18 deletions(-) diff --git a/Documentation/scheduler/sched-stats.txt b/Documentation/scheduler/sched-stats.txt index 01e69404ee5..1cd5d51bc76 100644 --- a/Documentation/scheduler/sched-stats.txt +++ b/Documentation/scheduler/sched-stats.txt @@ -1,3 +1,7 @@ +Version 15 of schedstats dropped counters for some sched_yield: +yld_exp_empty, yld_act_empty and yld_both_empty. Otherwise, it is +identical to version 14. + Version 14 of schedstats includes support for sched_domains, which hit the mainline kernel in 2.6.20 although it is identical to the stats from version 12 which was in the kernel from 2.6.13-2.6.19 (version 13 never saw a kernel @@ -28,32 +32,25 @@ to write their own scripts, the fields are described here. CPU statistics -------------- -cpu 1 2 3 4 5 6 7 8 9 10 11 12 - -NOTE: In the sched_yield() statistics, the active queue is considered empty - if it has only one process in it, since obviously the process calling - sched_yield() is that process. +cpu 1 2 3 4 5 6 7 8 9 -First four fields are sched_yield() statistics: - 1) # of times both the active and the expired queue were empty - 2) # of times just the active queue was empty - 3) # of times just the expired queue was empty - 4) # of times sched_yield() was called +First field is a sched_yield() statistic: + 1) # of times sched_yield() was called Next three are schedule() statistics: - 5) # of times we switched to the expired queue and reused it - 6) # of times schedule() was called - 7) # of times schedule() left the processor idle + 2) # of times we switched to the expired queue and reused it + 3) # of times schedule() was called + 4) # of times schedule() left the processor idle Next two are try_to_wake_up() statistics: - 8) # of times try_to_wake_up() was called - 9) # of times try_to_wake_up() was called to wake up the local cpu + 5) # of times try_to_wake_up() was called + 6) # of times try_to_wake_up() was called to wake up the local cpu Next three are statistics describing scheduling latency: - 10) sum of all time spent running by tasks on this processor (in jiffies) - 11) sum of all time spent waiting to run by tasks on this processor (in + 7) sum of all time spent running by tasks on this processor (in jiffies) + 8) sum of all time spent waiting to run by tasks on this processor (in jiffies) - 12) # of timeslices run on this cpu + 9) # of timeslices run on this cpu Domain statistics -- cgit v1.2.3-18-g5258 From 456bb1697ec08c034449c81e03094fe26bedb9e9 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 21 Dec 2010 21:16:11 +0800 Subject: usb: musb: fix kernel panic during s2ram(v2) This patch fixes kernel panic during s2ram, which is caused by the below: - musb is not put into drv data of musb platform device if CONFIG_USB_MUSB_HDRC_HCD is defined - glue layer driver always get musb instance via platform_get_drvdata. The patch fixes the issue by always puting musb into drv data of musb platform device, which is doable even the platform device is a host controller device. Cc: Alan Stern Cc: Sergei Shtylyov Signed-off-by: Ming Lei Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_core.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 07cf394e491..12b515b3b69 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -128,12 +128,7 @@ MODULE_ALIAS("platform:" MUSB_DRIVER_NAME); static inline struct musb *dev_to_musb(struct device *dev) { -#ifdef CONFIG_USB_MUSB_HDRC_HCD - /* usbcore insists dev->driver_data is a "struct hcd *" */ - return hcd_to_musb(dev_get_drvdata(dev)); -#else return dev_get_drvdata(dev); -#endif } /*-------------------------------------------------------------------------*/ @@ -1876,10 +1871,9 @@ allocate_instance(struct device *dev, musb = kzalloc(sizeof *musb, GFP_KERNEL); if (!musb) return NULL; - dev_set_drvdata(dev, musb); #endif - + dev_set_drvdata(dev, musb); musb->mregs = mbase; musb->ctrl_base = mbase; musb->nIrq = -ENODEV; -- cgit v1.2.3-18-g5258 From 541079de88735152a993ff93e90096643730a054 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 10 Dec 2010 21:03:29 +0300 Subject: usb: musb: core: fix IRQ check musb_probe() only regards 0 as a wrong IRQ number, despite platform_get_irq() that it calls returns -ENXIO in that case. It leads to musb_init_controller() calling request_irq() with a negative IRQ number, and when it naturally fails, the following is printed to the console: request_irq -6 failed! musb_init_controller failed with status -19 Fix musb_probe() to filter out the error values as well as 0. Signed-off-by: Sergei Shtylyov Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 12b515b3b69..54a8bd1047d 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2185,7 +2185,7 @@ static int __init musb_probe(struct platform_device *pdev) void __iomem *base; iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!iomem || irq == 0) + if (!iomem || irq <= 0) return -ENODEV; base = ioremap(iomem->start, resource_size(iomem)); -- cgit v1.2.3-18-g5258 From 9c668079c864c3b49d8deb56dafedf916b2a72d0 Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Wed, 5 Jan 2011 17:36:41 +0800 Subject: usb: musb: hsdma: change back to use musb_read/writew Blackfin platform doesn't support 32bits musbdma registers, so change back to use musb_read/writew instead of musb_read/writel and simply some format casts. Signed-off-by: Bob Liu Signed-off-by: Felipe Balbi --- drivers/usb/musb/musbhsdma.h | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/drivers/usb/musb/musbhsdma.h b/drivers/usb/musb/musbhsdma.h index f763d62f151..21056c924c7 100644 --- a/drivers/usb/musb/musbhsdma.h +++ b/drivers/usb/musb/musbhsdma.h @@ -94,24 +94,33 @@ static inline void musb_write_hsdma_addr(void __iomem *mbase, { musb_writew(mbase, MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_LOW), - ((u16)((u32) dma_addr & 0xFFFF))); + dma_addr); musb_writew(mbase, MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_HIGH), - ((u16)(((u32) dma_addr >> 16) & 0xFFFF))); + (dma_addr >> 16)); } static inline u32 musb_read_hsdma_count(void __iomem *mbase, u8 bchannel) { - return musb_readl(mbase, + u32 count = musb_readw(mbase, MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH)); + + count = count << 16; + + count |= musb_readw(mbase, + MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW)); + + return count; } static inline void musb_write_hsdma_count(void __iomem *mbase, u8 bchannel, u32 len) { - musb_writel(mbase, + musb_writew(mbase, + MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW),len); + musb_writew(mbase, MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH), - len); + (len >> 16)); } #endif /* CONFIG_BLACKFIN */ -- cgit v1.2.3-18-g5258 From 0662481855c389b75a0a54c32870cc90563d80a9 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Fri, 21 Jan 2011 13:39:20 +0800 Subject: usb: musb: disable double buffering when it's broken We know that blackfin doesn't support double buffering feature as of today. So we add a flag set by musb_platform_init() to forcefully disable that feature. Such flag is created and marked as deprecated to force us to find a solution for the missing double buffering support on blackfin. Signed-off-by: Felipe Balbi --- drivers/usb/musb/blackfin.c | 1 + drivers/usb/musb/musb_core.h | 12 ++++++++++++ drivers/usb/musb/musb_gadget.c | 12 ++++++++++-- drivers/usb/musb/musb_host.c | 11 +++++------ 4 files changed, 28 insertions(+), 8 deletions(-) diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index eeba228eb2a..9d49d1cd7ce 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -404,6 +404,7 @@ static int bfin_musb_init(struct musb *musb) musb->xceiv->set_power = bfin_musb_set_power; musb->isr = blackfin_interrupt; + musb->double_buffer_not_ok = true; return 0; } diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index d0c236f8e19..d74a8113ae7 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -488,6 +488,18 @@ struct musb { unsigned set_address:1; unsigned test_mode:1; unsigned softconnect:1; + /* + * FIXME: Remove this flag. + * + * This is only added to allow Blackfin to work + * with current driver. For some unknown reason + * Blackfin doesn't work with double buffering + * and that's enabled by default. + * + * We added this flag to forcefully disable double + * buffering until we get it working. + */ + unsigned double_buffer_not_ok:1 __deprecated; u8 address; u8 test_mode_nr; diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index ed58c6c8f15..23dad4c8785 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -989,7 +989,11 @@ static int musb_gadget_enable(struct usb_ep *ep, /* Set TXMAXP with the FIFO size of the endpoint * to disable double buffering mode. */ - musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11)); + if (musb->double_buffer_not_ok) + musb_writew(regs, MUSB_TXMAXP, hw_ep->max_packet_sz_tx); + else + musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz + | (musb_ep->hb_mult << 11)); csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG; if (musb_readw(regs, MUSB_TXCSR) @@ -1025,7 +1029,11 @@ static int musb_gadget_enable(struct usb_ep *ep, /* Set RXMAXP with the FIFO size of the endpoint * to disable double buffering mode. */ - musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11)); + if (musb->double_buffer_not_ok) + musb_writew(regs, MUSB_RXMAXP, hw_ep->max_packet_sz_tx); + else + musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz + | (musb_ep->hb_mult << 11)); /* force shared fifo to OUT-only mode */ if (hw_ep->is_shared_fifo) { diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 4d5bcb4e14d..0f523d7db57 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -609,7 +609,7 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep) /* Set RXMAXP with the FIFO size of the endpoint * to disable double buffer mode. */ - if (musb->hwvers < MUSB_HWVERS_2000) + if (musb->double_buffer_not_ok) musb_writew(ep->regs, MUSB_RXMAXP, ep->max_packet_sz_rx); else musb_writew(ep->regs, MUSB_RXMAXP, @@ -784,14 +784,13 @@ static void musb_ep_program(struct musb *musb, u8 epnum, /* protocol/endpoint/interval/NAKlimit */ if (epnum) { musb_writeb(epio, MUSB_TXTYPE, qh->type_reg); - if (can_bulk_split(musb, qh->type)) + if (musb->double_buffer_not_ok) musb_writew(epio, MUSB_TXMAXP, - packet_sz - | ((hw_ep->max_packet_sz_tx / - packet_sz) - 1) << 11); + hw_ep->max_packet_sz_tx); else musb_writew(epio, MUSB_TXMAXP, - packet_sz); + qh->maxpacket | + ((qh->hb_mult - 1) << 11)); musb_writeb(epio, MUSB_TXINTERVAL, qh->intv_reg); } else { musb_writeb(epio, MUSB_NAKLIMIT0, qh->intv_reg); -- cgit v1.2.3-18-g5258 From c65bfa62b7185bdeb063c2a637f501f00997d068 Mon Sep 17 00:00:00 2001 From: Mian Yousaf Kaukab Date: Tue, 4 Jan 2011 12:47:02 +0100 Subject: usb: musb: maintain three states for buffer mappings instead of two If dma buffers are mapped by a higher layer, with a boolean musb_request.mapped it is still possible to call dma_sync_single_for_device() from musb_g_giveback(), even if txstate()/rxstate() has called unmap_dma_buffer() before falling back to pio mode. Moreover, check for musb_ep->dma is moved within map_dma_buffer() so where applicable checks for it are removed. And where possible, checks for is_dma_capable() are merged with buffer map state check. Signed-off-by: Mian Yousaf Kaukab Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_gadget.c | 45 +++++++++++++++++++++++------------------- drivers/usb/musb/musb_gadget.h | 8 +++++++- 2 files changed, 32 insertions(+), 21 deletions(-) diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 23dad4c8785..65775039d6b 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -92,11 +92,19 @@ /* ----------------------------------------------------------------------- */ +#define is_buffer_mapped(req) (is_dma_capable() && \ + (req->map_state != UN_MAPPED)) + /* Maps the buffer to dma */ static inline void map_dma_buffer(struct musb_request *request, - struct musb *musb) + struct musb *musb, struct musb_ep *musb_ep) { + request->map_state = UN_MAPPED; + + if (!is_dma_capable() || !musb_ep->dma) + return; + if (request->request.dma == DMA_ADDR_INVALID) { request->request.dma = dma_map_single( musb->controller, @@ -105,7 +113,7 @@ static inline void map_dma_buffer(struct musb_request *request, request->tx ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - request->mapped = 1; + request->map_state = MUSB_MAPPED; } else { dma_sync_single_for_device(musb->controller, request->request.dma, @@ -113,7 +121,7 @@ static inline void map_dma_buffer(struct musb_request *request, request->tx ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - request->mapped = 0; + request->map_state = PRE_MAPPED; } } @@ -121,11 +129,14 @@ static inline void map_dma_buffer(struct musb_request *request, static inline void unmap_dma_buffer(struct musb_request *request, struct musb *musb) { + if (!is_buffer_mapped(request)) + return; + if (request->request.dma == DMA_ADDR_INVALID) { DBG(20, "not unmapping a never mapped buffer\n"); return; } - if (request->mapped) { + if (request->map_state == MUSB_MAPPED) { dma_unmap_single(musb->controller, request->request.dma, request->request.length, @@ -133,16 +144,15 @@ static inline void unmap_dma_buffer(struct musb_request *request, ? DMA_TO_DEVICE : DMA_FROM_DEVICE); request->request.dma = DMA_ADDR_INVALID; - request->mapped = 0; - } else { + } else { /* PRE_MAPPED */ dma_sync_single_for_cpu(musb->controller, request->request.dma, request->request.length, request->tx ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - } + request->map_state = UN_MAPPED; } /* @@ -172,8 +182,7 @@ __acquires(ep->musb->lock) ep->busy = 1; spin_unlock(&musb->lock); - if (is_dma_capable() && ep->dma) - unmap_dma_buffer(req, musb); + unmap_dma_buffer(req, musb); if (request->status == 0) DBG(5, "%s done request %p, %d/%d\n", ep->end_point.name, request, @@ -335,7 +344,7 @@ static void txstate(struct musb *musb, struct musb_request *req) csr); #ifndef CONFIG_MUSB_PIO_ONLY - if (is_dma_capable() && musb_ep->dma) { + if (is_buffer_mapped(req)) { struct dma_controller *c = musb->dma_controller; size_t request_size; @@ -436,8 +445,7 @@ static void txstate(struct musb *musb, struct musb_request *req) * Unmap the dma buffer back to cpu if dma channel * programming fails */ - if (is_dma_capable() && musb_ep->dma) - unmap_dma_buffer(req, musb); + unmap_dma_buffer(req, musb); musb_write_fifo(musb_ep->hw_ep, fifo_count, (u8 *) (request->buf + request->actual)); @@ -627,7 +635,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) return; } - if (is_cppi_enabled() && musb_ep->dma) { + if (is_cppi_enabled() && is_buffer_mapped(req)) { struct dma_controller *c = musb->dma_controller; struct dma_channel *channel = musb_ep->dma; @@ -658,7 +666,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) len = musb_readw(epio, MUSB_RXCOUNT); if (request->actual < request->length) { #ifdef CONFIG_USB_INVENTRA_DMA - if (is_dma_capable() && musb_ep->dma) { + if (is_buffer_mapped(req)) { struct dma_controller *c; struct dma_channel *channel; int use_dma = 0; @@ -742,7 +750,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) fifo_count = min_t(unsigned, len, fifo_count); #ifdef CONFIG_USB_TUSB_OMAP_DMA - if (tusb_dma_omap() && musb_ep->dma) { + if (tusb_dma_omap() && is_buffer_mapped(req)) { struct dma_controller *c = musb->dma_controller; struct dma_channel *channel = musb_ep->dma; u32 dma_addr = request->dma + request->actual; @@ -762,7 +770,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) * programming fails. This buffer is mapped if the * channel allocation is successful */ - if (is_dma_capable() && musb_ep->dma) { + if (is_buffer_mapped(req)) { unmap_dma_buffer(req, musb); /* @@ -1222,10 +1230,7 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req, request->epnum = musb_ep->current_epnum; request->tx = musb_ep->is_in; - if (is_dma_capable() && musb_ep->dma) - map_dma_buffer(request, musb); - else - request->mapped = 0; + map_dma_buffer(request, musb, musb_ep); spin_lock_irqsave(&musb->lock, lockflags); diff --git a/drivers/usb/musb/musb_gadget.h b/drivers/usb/musb/musb_gadget.h index dec8dc00819..a55354fbccf 100644 --- a/drivers/usb/musb/musb_gadget.h +++ b/drivers/usb/musb/musb_gadget.h @@ -35,13 +35,19 @@ #ifndef __MUSB_GADGET_H #define __MUSB_GADGET_H +enum buffer_map_state { + UN_MAPPED = 0, + PRE_MAPPED, + MUSB_MAPPED +}; + struct musb_request { struct usb_request request; struct musb_ep *ep; struct musb *musb; u8 tx; /* endpoint direction */ u8 epnum; - u8 mapped; + enum buffer_map_state map_state; }; static inline struct musb_request *to_musb_request(struct usb_request *req) -- cgit v1.2.3-18-g5258 From 5f5761cb8e77f2f2321b7847eef9629e6896cd47 Mon Sep 17 00:00:00 2001 From: Mian Yousaf Kaukab Date: Tue, 4 Jan 2011 12:47:03 +0100 Subject: usb: musb: introduce api for dma code to check compatibility with usb request Gadget MUSB driver handles dma mappings in musb_gadget_queue(). Where as it is possible for dma code to reject the usb request later at ->channel_program() called from txstate()/rxstate() For example ->channel_program in tusb6010_omap.c: static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz, u8 rndis_mode, dma_addr_t dma_addr, u32 len) { ... if (unlikely(dma_addr & 0x1) || (len < 32) || (len > packet_sz)) return false; ... if (dma_addr & 0x2) return false; ... } In this case, usb request will be handled in PIO mode which renders dma mapping operations unnecessary. This patch adds an api to allow dma code to indicate incompatibility with usb request. Gadget musb driver call this api, if available, before dma mappings to avoid any unnecessary mapping operations. Signed-off-by: Mian Yousaf Kaukab Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_dma.h | 3 +++ drivers/usb/musb/musb_gadget.c | 14 ++++++++++++++ 2 files changed, 17 insertions(+) diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h index 916065ba9e7..3a97c4e2d4f 100644 --- a/drivers/usb/musb/musb_dma.h +++ b/drivers/usb/musb/musb_dma.h @@ -169,6 +169,9 @@ struct dma_controller { dma_addr_t dma_addr, u32 length); int (*channel_abort)(struct dma_channel *); + int (*is_compatible)(struct dma_channel *channel, + u16 maxpacket, + void *buf, u32 length); }; /* called after channel_program(), may indicate a fault */ diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 65775039d6b..2fe304611dc 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -100,11 +100,25 @@ static inline void map_dma_buffer(struct musb_request *request, struct musb *musb, struct musb_ep *musb_ep) { + int compatible = true; + struct dma_controller *dma = musb->dma_controller; + request->map_state = UN_MAPPED; if (!is_dma_capable() || !musb_ep->dma) return; + /* Check if DMA engine can handle this request. + * DMA code must reject the USB request explicitly. + * Default behaviour is to map the request. + */ + if (dma->is_compatible) + compatible = dma->is_compatible(musb_ep->dma, + musb_ep->packet_sz, request->request.buf, + request->request.length); + if (!compatible) + return; + if (request->request.dma == DMA_ADDR_INVALID) { request->request.dma = dma_map_single( musb->controller, -- cgit v1.2.3-18-g5258 From 3e434a86cb21fba95d86b8d756997c235eade037 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Fri, 7 Jan 2011 11:19:52 +0200 Subject: usb: ehci-omap: Show fatal probing time errors to end user There are a few error paths in ehci_hcd_omap_probe that can be triggered because of memory allocation or hw failure. Change those dev_dbg error prints to dev_err with an error code printed so that the end users are able to notice the issue. Signed-off-by: Jarkko Nikula Signed-off-by: Felipe Balbi --- drivers/usb/host/ehci-omap.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 680f2ef4e59..f784ceb862a 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -796,7 +796,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) hcd = usb_create_hcd(&ehci_omap_hc_driver, &pdev->dev, dev_name(&pdev->dev)); if (!hcd) { - dev_dbg(&pdev->dev, "failed to create hcd with err %d\n", ret); + dev_err(&pdev->dev, "failed to create hcd with err %d\n", ret); ret = -ENOMEM; goto err_create_hcd; } @@ -864,7 +864,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) ret = omap_start_ehc(omap, hcd); if (ret) { - dev_dbg(&pdev->dev, "failed to start ehci\n"); + dev_err(&pdev->dev, "failed to start ehci with err %d\n", ret); goto err_start; } @@ -879,7 +879,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); if (ret) { - dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret); + dev_err(&pdev->dev, "failed to add hcd with err %d\n", ret); goto err_add_hcd; } -- cgit v1.2.3-18-g5258 From 303783aac812020d1a8b5152f44639d528870317 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 27 Jan 2011 06:26:36 +0800 Subject: ARM: mxs: fix clock base address missing Signed-off-by: Shawn Guo Signed-off-by: Sascha Hauer --- arch/arm/mach-mxs/clock-mx23.c | 2 +- arch/arm/mach-mxs/clock-mx28.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c index 72069243aec..ca72a05ed9c 100644 --- a/arch/arm/mach-mxs/clock-mx23.c +++ b/arch/arm/mach-mxs/clock-mx23.c @@ -347,7 +347,7 @@ static int name##_set_parent(struct clk *clk, struct clk *parent) \ { \ if (parent != clk->parent) { \ __raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit, \ - HW_CLKCTRL_CLKSEQ_TOG); \ + CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ_TOG); \ clk->parent = parent; \ } \ \ diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index 44acd9cd177..bf30d2b66d8 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -483,7 +483,7 @@ static int name##_set_parent(struct clk *clk, struct clk *parent) \ { \ if (parent != clk->parent) { \ __raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit, \ - HW_CLKCTRL_CLKSEQ_TOG); \ + CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ_TOG); \ clk->parent = parent; \ } \ \ -- cgit v1.2.3-18-g5258 From 014aaf6b15842eec03162c0026ec533b4b738126 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Thu, 27 Jan 2011 11:28:34 +0100 Subject: ARM: mxs/imx28: remove now unused clock lookup "fec.0" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit b2878fa (ARM: mx28: update clock and device name for dual fec support) added only the new lookups without removing the old one. Cc: Shawn Guo Signed-off-by: Uwe Kleine-König Acked-by: Shawn Guo Signed-off-by: Sascha Hauer --- arch/arm/mach-mxs/clock-mx28.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index bf30d2b66d8..fd1c4c54b8e 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -609,7 +609,6 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("duart", NULL, uart_clk) _REGISTER_CLOCK("imx28-fec.0", NULL, fec_clk) _REGISTER_CLOCK("imx28-fec.1", NULL, fec_clk) - _REGISTER_CLOCK("fec.0", NULL, fec_clk) _REGISTER_CLOCK("rtc", NULL, rtc_clk) _REGISTER_CLOCK("pll2", NULL, pll2_clk) _REGISTER_CLOCK(NULL, "hclk", hbus_clk) -- cgit v1.2.3-18-g5258 From 5df67083488ccbad925f583b698ab38f8629a016 Mon Sep 17 00:00:00 2001 From: Tsutomu Itoh Date: Tue, 1 Feb 2011 09:17:35 +0000 Subject: btrfs: checking NULL or not in some functions Because NULL is returned when the memory allocation fails, it is checked whether it is NULL. Signed-off-by: Tsutomu Itoh Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 2 ++ fs/btrfs/extent_io.c | 2 ++ fs/btrfs/tree-log.c | 6 ++++++ 3 files changed, 10 insertions(+) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index f96641a93fc..9de4ff03882 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -6496,6 +6496,8 @@ static noinline int relocate_inode_pages(struct inode *inode, u64 start, int ret = 0; ra = kzalloc(sizeof(*ra), GFP_NOFS); + if (!ra) + return -ENOMEM; mutex_lock(&inode->i_mutex); first_index = start >> PAGE_CACHE_SHIFT; diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 6411ed6ca44..8862dda46ff 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -1920,6 +1920,8 @@ static int submit_extent_page(int rw, struct extent_io_tree *tree, nr = bio_get_nr_vecs(bdev); bio = btrfs_bio_alloc(bdev, sector, nr, GFP_NOFS | __GFP_HIGH); + if (!bio) + return -ENOMEM; bio_add_page(bio, page, page_size, offset); bio->bi_end_io = end_io_func; diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index 42dfc307704..6d66e5caff9 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -2751,7 +2751,13 @@ static int btrfs_log_inode(struct btrfs_trans_handle *trans, log = root->log_root; path = btrfs_alloc_path(); + if (!path) + return -ENOMEM; dst_path = btrfs_alloc_path(); + if (!dst_path) { + btrfs_free_path(path); + return -ENOMEM; + } min_key.objectid = inode->i_ino; min_key.type = BTRFS_INODE_ITEM_KEY; -- cgit v1.2.3-18-g5258 From 98d5dc13e7e74b77ca3b4c3cbded9f48d2dbbbb7 Mon Sep 17 00:00:00 2001 From: Tsutomu Itoh Date: Thu, 20 Jan 2011 06:19:37 +0000 Subject: btrfs: fix return value check of btrfs_start_transaction() The error check of btrfs_start_transaction() is added, and the mistake of the error check on several places is corrected. Signed-off-by: Tsutomu Itoh Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 7 +++++-- fs/btrfs/inode.c | 1 + fs/btrfs/ioctl.c | 10 ++++++++-- fs/btrfs/relocation.c | 3 +++ fs/btrfs/super.c | 2 ++ fs/btrfs/tree-log.c | 1 + fs/btrfs/volumes.c | 19 +++++++++++++++++-- 7 files changed, 37 insertions(+), 6 deletions(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 9de4ff03882..f07ba21cbf0 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -6271,6 +6271,8 @@ int btrfs_drop_snapshot(struct btrfs_root *root, BUG_ON(!wc); trans = btrfs_start_transaction(tree_root, 0); + BUG_ON(IS_ERR(trans)); + if (block_rsv) trans->block_rsv = block_rsv; @@ -6368,6 +6370,7 @@ int btrfs_drop_snapshot(struct btrfs_root *root, btrfs_end_transaction_throttle(trans, tree_root); trans = btrfs_start_transaction(tree_root, 0); + BUG_ON(IS_ERR(trans)); if (block_rsv) trans->block_rsv = block_rsv; } @@ -7587,7 +7590,7 @@ int btrfs_cleanup_reloc_trees(struct btrfs_root *root) if (found) { trans = btrfs_start_transaction(root, 1); - BUG_ON(!trans); + BUG_ON(IS_ERR(trans)); ret = btrfs_commit_transaction(trans, root); BUG_ON(ret); } @@ -7831,7 +7834,7 @@ static noinline int relocate_one_extent(struct btrfs_root *extent_root, trans = btrfs_start_transaction(extent_root, 1); - BUG_ON(!trans); + BUG_ON(IS_ERR(trans)); if (extent_key->objectid == 0) { ret = del_extent_zero(trans, extent_root, path, extent_key); diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 5621818921f..36bc3f49ebf 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -2357,6 +2357,7 @@ void btrfs_orphan_cleanup(struct btrfs_root *root) */ if (is_bad_inode(inode)) { trans = btrfs_start_transaction(root, 0); + BUG_ON(IS_ERR(trans)); btrfs_orphan_del(trans, inode); btrfs_end_transaction(trans, root); iput(inode); diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 12dabe28cf5..02d224e8c83 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -907,6 +907,10 @@ static noinline int btrfs_ioctl_resize(struct btrfs_root *root, if (new_size > old_size) { trans = btrfs_start_transaction(root, 0); + if (IS_ERR(trans)) { + ret = PTR_ERR(trans); + goto out_unlock; + } ret = btrfs_grow_device(trans, device, new_size); btrfs_commit_transaction(trans, root); } else { @@ -2141,9 +2145,9 @@ static long btrfs_ioctl_default_subvol(struct file *file, void __user *argp) path->leave_spinning = 1; trans = btrfs_start_transaction(root, 1); - if (!trans) { + if (IS_ERR(trans)) { btrfs_free_path(path); - return -ENOMEM; + return PTR_ERR(trans); } dir_id = btrfs_super_root_dir(&root->fs_info->super_copy); @@ -2337,6 +2341,8 @@ static noinline long btrfs_ioctl_start_sync(struct file *file, void __user *argp u64 transid; trans = btrfs_start_transaction(root, 0); + if (IS_ERR(trans)) + return PTR_ERR(trans); transid = trans->transid; btrfs_commit_transaction_async(trans, root, 0); diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index ea996543024..1f5556acb53 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -2028,6 +2028,7 @@ static noinline_for_stack int merge_reloc_root(struct reloc_control *rc, while (1) { trans = btrfs_start_transaction(root, 0); + BUG_ON(IS_ERR(trans)); trans->block_rsv = rc->block_rsv; ret = btrfs_block_rsv_check(trans, root, rc->block_rsv, @@ -3665,6 +3666,7 @@ static noinline_for_stack int relocate_block_group(struct reloc_control *rc) while (1) { trans = btrfs_start_transaction(rc->extent_root, 0); + BUG_ON(IS_ERR(trans)); if (update_backref_cache(trans, &rc->backref_cache)) { btrfs_end_transaction(trans, rc->extent_root); @@ -4033,6 +4035,7 @@ static noinline_for_stack int mark_garbage_root(struct btrfs_root *root) int ret; trans = btrfs_start_transaction(root->fs_info->tree_root, 0); + BUG_ON(IS_ERR(trans)); memset(&root->root_item.drop_progress, 0, sizeof(root->root_item.drop_progress)); diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index f4e45fdded3..0209b5fc772 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -623,6 +623,8 @@ int btrfs_sync_fs(struct super_block *sb, int wait) btrfs_wait_ordered_extents(root, 0, 0); trans = btrfs_start_transaction(root, 0); + if (IS_ERR(trans)) + return PTR_ERR(trans); ret = btrfs_commit_transaction(trans, root); return ret; } diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index 6d66e5caff9..a4bbb854dfd 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -3112,6 +3112,7 @@ int btrfs_recover_log_trees(struct btrfs_root *log_root_tree) BUG_ON(!path); trans = btrfs_start_transaction(fs_info->tree_root, 0); + BUG_ON(IS_ERR(trans)); wc.trans = trans; wc.pin = 1; diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index f2d2f4ccc73..7cad59353b0 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -1212,6 +1212,10 @@ static int btrfs_rm_dev_item(struct btrfs_root *root, return -ENOMEM; trans = btrfs_start_transaction(root, 0); + if (IS_ERR(trans)) { + btrfs_free_path(path); + return PTR_ERR(trans); + } key.objectid = BTRFS_DEV_ITEMS_OBJECTID; key.type = BTRFS_DEV_ITEM_KEY; key.offset = device->devid; @@ -1604,6 +1608,12 @@ int btrfs_init_new_device(struct btrfs_root *root, char *device_path) } trans = btrfs_start_transaction(root, 0); + if (IS_ERR(trans)) { + kfree(device); + ret = PTR_ERR(trans); + goto error; + } + lock_chunks(root); device->barriers = 1; @@ -1872,7 +1882,7 @@ static int btrfs_relocate_chunk(struct btrfs_root *root, return ret; trans = btrfs_start_transaction(root, 0); - BUG_ON(!trans); + BUG_ON(IS_ERR(trans)); lock_chunks(root); @@ -2046,7 +2056,7 @@ int btrfs_balance(struct btrfs_root *dev_root) BUG_ON(ret); trans = btrfs_start_transaction(dev_root, 0); - BUG_ON(!trans); + BUG_ON(IS_ERR(trans)); ret = btrfs_grow_device(trans, device, old_size); BUG_ON(ret); @@ -2212,6 +2222,11 @@ again: /* Shrinking succeeded, else we would be at "done". */ trans = btrfs_start_transaction(root, 0); + if (IS_ERR(trans)) { + ret = PTR_ERR(trans); + goto done; + } + lock_chunks(root); device->disk_total_bytes = new_size; -- cgit v1.2.3-18-g5258 From acd62276773b46810a3292af0c915c9782138ff2 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Tue, 1 Feb 2011 11:11:55 +0100 Subject: ASoC: Amstrad Delta: fix const related build error The Amstrad Delta ASoC driver used to override the digital_mute() callback, expected to be not provided by the on-board CX20442 CODEC driver, with its own implementation. While this is still posssible when substituting the whole empty snd_soc_dai_driver.ops member (the CX20442 case), replacing snd_soc_dai_ops.digital_mute only is no longer correct after the snd_soc_dai_driver.ops member has been constified, and results in build error. Drop this actually not used code path in hope the CX20442 driver never provides its own snd_soc_dai_ops structure. Created and tested against linux-2.6.38-rc2 Signed-off-by: Janusz Krzysztofik Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/omap/ams-delta.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/sound/soc/omap/ams-delta.c b/sound/soc/omap/ams-delta.c index 2101bdcee21..3167be68962 100644 --- a/sound/soc/omap/ams-delta.c +++ b/sound/soc/omap/ams-delta.c @@ -507,8 +507,6 @@ static int ams_delta_cx20442_init(struct snd_soc_pcm_runtime *rtd) /* Set up digital mute if not provided by the codec */ if (!codec_dai->driver->ops) { codec_dai->driver->ops = &ams_delta_dai_ops; - } else if (!codec_dai->driver->ops->digital_mute) { - codec_dai->driver->ops->digital_mute = ams_delta_digital_mute; } else { ams_delta_ops.startup = ams_delta_startup; ams_delta_ops.shutdown = ams_delta_shutdown; -- cgit v1.2.3-18-g5258 From f019ee5feb344ff0b22b58df4568676295aae14f Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Tue, 1 Feb 2011 13:01:17 +0100 Subject: ASoC: CX20442: fix NULL pointer dereference The CX20442 codec driver never provided the snd_soc_codec_driver's .reg_cache_default member. With the latest ASoC framework changes, it seems to be referred unconditionally, resulting in a NULL pointer dereference if missing. Provide it. Created and tested on Amstrad Delta against linux-2.6.38-rc2 Signed-off-by: Janusz Krzysztofik Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/codecs/cx20442.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/soc/codecs/cx20442.c b/sound/soc/codecs/cx20442.c index 03d1e860d22..bb4bf65b9e7 100644 --- a/sound/soc/codecs/cx20442.c +++ b/sound/soc/codecs/cx20442.c @@ -367,9 +367,12 @@ static int cx20442_codec_remove(struct snd_soc_codec *codec) return 0; } +static const u8 cx20442_reg = CX20442_TELOUT | CX20442_MIC; + static struct snd_soc_codec_driver cx20442_codec_dev = { .probe = cx20442_codec_probe, .remove = cx20442_codec_remove, + .reg_cache_default = &cx20442_reg, .reg_cache_size = 1, .reg_word_size = sizeof(u8), .read = cx20442_read_reg_cache, -- cgit v1.2.3-18-g5258 From 5e18247b02d60a1ea4bf98c05e139461ca9aec64 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Tue, 18 Jan 2011 13:04:43 +0200 Subject: vhost: rcu annotation fixup When built with rcu checks enabled, vhost triggers bogus warnings as vhost features are read without dev->mutex sometimes, and private pointer is read with our kind of rcu where work serves as a read side critical section. Fixing it properly is not trivial. Disable the warnings by stubbing out the checks for now. Signed-off-by: Michael S. Tsirkin --- drivers/vhost/net.c | 9 +++++---- drivers/vhost/vhost.h | 6 +++--- 2 files changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c index 9b3ca103135..f616cefc95b 100644 --- a/drivers/vhost/net.c +++ b/drivers/vhost/net.c @@ -128,8 +128,7 @@ static void handle_tx(struct vhost_net *net) size_t hdr_size; struct socket *sock; - /* TODO: check that we are running from vhost_worker? - * Not sure it's worth it, it's straight-forward enough. */ + /* TODO: check that we are running from vhost_worker? */ sock = rcu_dereference_check(vq->private_data, 1); if (!sock) return; @@ -306,7 +305,8 @@ static void handle_rx_big(struct vhost_net *net) size_t len, total_len = 0; int err; size_t hdr_size; - struct socket *sock = rcu_dereference(vq->private_data); + /* TODO: check that we are running from vhost_worker? */ + struct socket *sock = rcu_dereference_check(vq->private_data, 1); if (!sock || skb_queue_empty(&sock->sk->sk_receive_queue)) return; @@ -415,7 +415,8 @@ static void handle_rx_mergeable(struct vhost_net *net) int err, headcount; size_t vhost_hlen, sock_hlen; size_t vhost_len, sock_len; - struct socket *sock = rcu_dereference(vq->private_data); + /* TODO: check that we are running from vhost_worker? */ + struct socket *sock = rcu_dereference_check(vq->private_data, 1); if (!sock || skb_queue_empty(&sock->sk->sk_receive_queue)) return; diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h index 2af44b7b1f3..b3363ae3851 100644 --- a/drivers/vhost/vhost.h +++ b/drivers/vhost/vhost.h @@ -173,9 +173,9 @@ static inline int vhost_has_feature(struct vhost_dev *dev, int bit) { unsigned acked_features; - acked_features = - rcu_dereference_index_check(dev->acked_features, - lockdep_is_held(&dev->mutex)); + /* TODO: check that we are running from vhost_worker or dev mutex is + * held? */ + acked_features = rcu_dereference_index_check(dev->acked_features, 1); return acked_features & (1 << bit); } -- cgit v1.2.3-18-g5258 From 9d0db8b6b1da9e3d4c696ef29449700c58d589db Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 1 Feb 2011 16:03:46 +0100 Subject: netfilter: arpt_mangle: fix return values of checkentry In 135367b "netfilter: xtables: change xt_target.checkentry return type", the type returned by checkentry was changed from boolean to int, but the return values where not adjusted. arptables: Input/output error This broke arptables with the mangle target since it returns true under success, which is interpreted by xtables as >0, thus returning EIO. Signed-off-by: Pablo Neira Ayuso Signed-off-by: Patrick McHardy --- net/ipv4/netfilter/arpt_mangle.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/ipv4/netfilter/arpt_mangle.c b/net/ipv4/netfilter/arpt_mangle.c index b8ddcc480ed..a5e52a9f0a1 100644 --- a/net/ipv4/netfilter/arpt_mangle.c +++ b/net/ipv4/netfilter/arpt_mangle.c @@ -60,12 +60,12 @@ static int checkentry(const struct xt_tgchk_param *par) if (mangle->flags & ~ARPT_MANGLE_MASK || !(mangle->flags & ARPT_MANGLE_MASK)) - return false; + return -EINVAL; if (mangle->target != NF_DROP && mangle->target != NF_ACCEPT && mangle->target != XT_CONTINUE) - return false; - return true; + return -EINVAL; + return 0; } static struct xt_target arpt_mangle_reg __read_mostly = { -- cgit v1.2.3-18-g5258 From 3db7e93d3308fb882884b9f024235d6fbf542034 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 1 Feb 2011 16:06:30 +0100 Subject: netfilter: ecache: always set events bits, filter them later For the following rule: iptables -I PREROUTING -t raw -j CT --ctevents assured The event delivered looks like the following: [UPDATE] tcp 6 src=192.168.0.2 dst=192.168.1.2 sport=37041 dport=80 src=192.168.1.2 dst=192.168.1.100 sport=80 dport=37041 [ASSURED] Note that the TCP protocol state is not included. For that reason the CT event filtering is not very useful for conntrackd. To resolve this issue, instead of conditionally setting the CT events bits based on the ctmask, we always set them and perform the filtering in the late stage, just before the delivery. Thus, the event delivered looks like the following: [UPDATE] tcp 6 432000 ESTABLISHED src=192.168.0.2 dst=192.168.1.2 sport=37041 dport=80 src=192.168.1.2 dst=192.168.1.100 sport=80 dport=37041 [ASSURED] Signed-off-by: Pablo Neira Ayuso Signed-off-by: Patrick McHardy --- include/net/netfilter/nf_conntrack_ecache.h | 3 --- net/netfilter/nf_conntrack_ecache.c | 3 +++ 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/include/net/netfilter/nf_conntrack_ecache.h b/include/net/netfilter/nf_conntrack_ecache.h index 96ba5f7dcab..349cefedc9f 100644 --- a/include/net/netfilter/nf_conntrack_ecache.h +++ b/include/net/netfilter/nf_conntrack_ecache.h @@ -77,9 +77,6 @@ nf_conntrack_event_cache(enum ip_conntrack_events event, struct nf_conn *ct) if (e == NULL) return; - if (!(e->ctmask & (1 << event))) - return; - set_bit(event, &e->cache); } diff --git a/net/netfilter/nf_conntrack_ecache.c b/net/netfilter/nf_conntrack_ecache.c index 5702de35e2b..63a1b915a7e 100644 --- a/net/netfilter/nf_conntrack_ecache.c +++ b/net/netfilter/nf_conntrack_ecache.c @@ -63,6 +63,9 @@ void nf_ct_deliver_cached_events(struct nf_conn *ct) * this does not harm and it happens very rarely. */ unsigned long missed = e->missed; + if (!((events | missed) & e->ctmask)) + goto out_unlock; + ret = notify->fcn(events | missed, &item); if (unlikely(ret < 0 || missed)) { spin_lock_bh(&ct->lock); -- cgit v1.2.3-18-g5258 From 479600777bb588724d044815415f7d708d06644b Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Mon, 31 Jan 2011 13:25:29 +0530 Subject: ath9k: Fix memory leak due to failed PAPRD frames free the skb's when the Tx of PAPRD frames fails and also add a debug message indicating that. Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 568f7be2ec7..9040c2ff190 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -325,6 +325,8 @@ static bool ath_paprd_send_frame(struct ath_softc *sc, struct sk_buff *skb, int { struct ieee80211_hw *hw = sc->hw; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); + struct ath_hw *ah = sc->sc_ah; + struct ath_common *common = ath9k_hw_common(ah); struct ath_tx_control txctl; int time_left; @@ -342,8 +344,12 @@ static bool ath_paprd_send_frame(struct ath_softc *sc, struct sk_buff *skb, int init_completion(&sc->paprd_complete); sc->paprd_pending = true; txctl.paprd = BIT(chain); - if (ath_tx_start(hw, skb, &txctl) != 0) + + if (ath_tx_start(hw, skb, &txctl) != 0) { + ath_dbg(common, ATH_DBG_XMIT, "PAPRD TX failed\n"); + dev_kfree_skb_any(skb); return false; + } time_left = wait_for_completion_timeout(&sc->paprd_complete, msecs_to_jiffies(ATH_PAPRD_TIMEOUT)); -- cgit v1.2.3-18-g5258 From 48bc9a2ccec98de007117495123bba78a4bbdd9c Mon Sep 17 00:00:00 2001 From: Stefan Weil Date: Fri, 28 Jan 2011 12:30:17 +0000 Subject: vxge: Fix wrong boolean operator This error is reported by cppcheck: drivers/net/vxge/vxge-config.c:3693: warning: Mutual exclusion over || always evaluates to true. Did you intend to use && instead? It looks like cppcheck is correct, so fix this. No test was run. Cc: Ramkrishna Vepa Cc: Sivakumar Subramani Cc: Sreenivasa Honnur Cc: Jon Mason Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Stefan Weil Acked-by: Ram Vepa Signed-off-by: David S. Miller --- drivers/net/vxge/vxge-config.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/vxge/vxge-config.c b/drivers/net/vxge/vxge-config.c index 01c05f53e2f..228d4f7a58a 100644 --- a/drivers/net/vxge/vxge-config.c +++ b/drivers/net/vxge/vxge-config.c @@ -3690,7 +3690,7 @@ __vxge_hw_vpath_rts_table_get(struct __vxge_hw_vpath_handle *vp, if (status != VXGE_HW_OK) goto exit; - if ((rts_table != VXGE_HW_RTS_ACCESS_STEER_CTRL_DATA_STRUCT_SEL_DA) || + if ((rts_table != VXGE_HW_RTS_ACCESS_STEER_CTRL_DATA_STRUCT_SEL_DA) && (rts_table != VXGE_HW_RTS_ACS_STEER_CTRL_DATA_STRUCT_SEL_RTH_MULTI_IT)) *data1 = 0; -- cgit v1.2.3-18-g5258 From 2492218c63dca0fb4f041bdc366d243ae3426b40 Mon Sep 17 00:00:00 2001 From: Daniel Hellstrom Date: Tue, 1 Feb 2011 12:39:59 -0800 Subject: sparc32: unaligned memory access (MNA) trap handler bug Since commit f0e98c387e61de00646be31fab4c2fa0224e1efb ("[SPARC]: Fix link errors with gcc-4.3") the MNA trap handler does not emulate stores to unaligned addresses correctly. MNA operation from both kernel and user space are affected. A typical effect of this bug is nr_frags in skbs are overwritten during buffer copying/checksum-calculation, or maximally 6 bytes of data in the network buffer will be overwitten with garbage. Signed-off-by: Daniel Hellstrom Signed-off-by: David S. Miller --- arch/sparc/kernel/una_asm_32.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sparc/kernel/una_asm_32.S b/arch/sparc/kernel/una_asm_32.S index 8cc03458eb7..8f096e84a93 100644 --- a/arch/sparc/kernel/una_asm_32.S +++ b/arch/sparc/kernel/una_asm_32.S @@ -24,9 +24,9 @@ retl_efault: .globl __do_int_store __do_int_store: ld [%o2], %g1 - cmp %1, 2 + cmp %o1, 2 be 2f - cmp %1, 4 + cmp %o1, 4 be 1f srl %g1, 24, %g2 srl %g1, 16, %g7 -- cgit v1.2.3-18-g5258 From f97f3057fd2febbd7f34a60f09a2cb9cef8bf403 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 1 Feb 2011 13:19:07 -0800 Subject: depca: Fix warnings Replace the rather weird use of ++ with + 1 as the value is being assigned Signed-off-by: Alan Cox --- drivers/net/depca.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/depca.c b/drivers/net/depca.c index 1b48b68ad4f..8b0084d17c8 100644 --- a/drivers/net/depca.c +++ b/drivers/net/depca.c @@ -1094,7 +1094,7 @@ static int depca_rx(struct net_device *dev) } } /* Change buffer ownership for this last frame, back to the adapter */ - for (; lp->rx_old != entry; lp->rx_old = (++lp->rx_old) & lp->rxRingMask) { + for (; lp->rx_old != entry; lp->rx_old = (lp->rx_old + 1) & lp->rxRingMask) { writel(readl(&lp->rx_ring[lp->rx_old].base) | R_OWN, &lp->rx_ring[lp->rx_old].base); } writel(readl(&lp->rx_ring[entry].base) | R_OWN, &lp->rx_ring[entry].base); @@ -1103,7 +1103,7 @@ static int depca_rx(struct net_device *dev) /* ** Update entry information */ - lp->rx_new = (++lp->rx_new) & lp->rxRingMask; + lp->rx_new = (lp->rx_new + 1) & lp->rxRingMask; } return 0; @@ -1148,7 +1148,7 @@ static int depca_tx(struct net_device *dev) } /* Update all the pointers */ - lp->tx_old = (++lp->tx_old) & lp->txRingMask; + lp->tx_old = (lp->tx_old + 1) & lp->txRingMask; } return 0; -- cgit v1.2.3-18-g5258 From 5fe49d86f9d01044abf687a8cd21edef636d58aa Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 1 Feb 2011 19:43:02 +0000 Subject: drm/i915: Only bind to function 0 of the PCI device MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Early chipsets (gen2/3) used function 1 as a placeholder for multi-head. We used to ignore these since they were not assigned to PCI_CLASS_DISPLAY_VGA. However with 934f992c7 we attempt to bind to all Intel PCI_CLASS_DISPLAY devices (and functions) to work in multi-gpu systems. This fails hard on gen2/3. Reported-by: Ferenc Wágner Tested-by: Ferenc Wágner Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=28012 Signed-off-by: Chris Wilson Cc: stable@kernel.org --- drivers/gpu/drm/i915/i915_drv.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index e517447b088..cfb56d0ff36 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -568,6 +568,14 @@ int i915_reset(struct drm_device *dev, u8 flags) static int __devinit i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { + /* Only bind to function 0 of the device. Early generations + * used function 1 as a placeholder for multi-head. This causes + * us confusion instead, especially on the systems where both + * functions have the same PCI-ID! + */ + if (PCI_FUNC(pdev->devfn)) + return -ENODEV; + return drm_get_pci_dev(pdev, ent, &driver); } -- cgit v1.2.3-18-g5258 From d9c8f498c3b41e686d3306dcf01d95941fcc6b48 Mon Sep 17 00:00:00 2001 From: Vladislav Zolotarov Date: Tue, 1 Feb 2011 14:05:30 -0800 Subject: bnx2x: multicasts in NPAR mode The chip was erroneously configured to accept all multicast frames in a normal (none-promisc) rx mode both on the RSS and on the FCoE L2 rings when in an NPAR mode. This caused packet duplication for every received multicast frame in this mode. Signed-off-by: Vladislav Zolotarov Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_main.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c index 404d93e6df2..f40740e68ea 100644 --- a/drivers/net/bnx2x/bnx2x_main.c +++ b/drivers/net/bnx2x/bnx2x_main.c @@ -2301,15 +2301,10 @@ static void bnx2x_rxq_set_mac_filters(struct bnx2x *bp, u16 cl_id, u32 filters) /* accept matched ucast */ drop_all_ucast = 0; } - if (filters & BNX2X_ACCEPT_MULTICAST) { + if (filters & BNX2X_ACCEPT_MULTICAST) /* accept matched mcast */ drop_all_mcast = 0; - if (IS_MF_SI(bp)) - /* since mcast addresses won't arrive with ovlan, - * fw needs to accept all of them in - * switch-independent mode */ - accp_all_mcast = 1; - } + if (filters & BNX2X_ACCEPT_ALL_UNICAST) { /* accept all mcast */ drop_all_ucast = 0; -- cgit v1.2.3-18-g5258 From a29ae23f687649c35b1520a8f986497637a0cc62 Mon Sep 17 00:00:00 2001 From: Stefan Weil Date: Sun, 30 Jan 2011 10:31:26 +0000 Subject: isdn: icn: Fix potentially wrong string handling This warning was reported by cppcheck: drivers/isdn/icn/icn.c:1641: error: Dangerous usage of 'rev' (strncpy doesn't always 0-terminate it) If strncpy copied 20 bytes, the destination string rev was not terminated. The patch adds one more byte to rev and makes sure that this byte is always 0. Cc: Karsten Keil Cc: "David S. Miller" Cc: Tejun Heo Cc: Steven Rostedt Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Stefan Weil Signed-off-by: David S. Miller --- drivers/isdn/icn/icn.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/isdn/icn/icn.c b/drivers/isdn/icn/icn.c index f2b5bab5e6a..1f355bb85e5 100644 --- a/drivers/isdn/icn/icn.c +++ b/drivers/isdn/icn/icn.c @@ -1627,7 +1627,7 @@ __setup("icn=", icn_setup); static int __init icn_init(void) { char *p; - char rev[20]; + char rev[21]; memset(&dev, 0, sizeof(icn_dev)); dev.memaddr = (membase & 0x0ffc000); @@ -1638,6 +1638,7 @@ static int __init icn_init(void) if ((p = strchr(revision, ':'))) { strncpy(rev, p + 1, 20); + rev[20] = '\0'; p = strchr(rev, '$'); if (p) *p = 0; -- cgit v1.2.3-18-g5258 From 69bc70d4f97ce82153bed0afc9f432700c60390b Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 1 Feb 2011 11:17:28 -0800 Subject: gpu/stub: fix acpi_video build error, fix stub kconfig dependencies The comments under "config STUB_POULSBO" are close to correct, but they are not being followed. This patch updates them to reflect the requirements for THERMAL. This build error is caused by STUB_POULSBO selecting ACPI_VIDEO when ACPI_VIDEO's config requirements are not met. ERROR: "thermal_cooling_device_register" [drivers/acpi/video.ko] undefined! ERROR: "thermal_cooling_device_unregister" [drivers/acpi/video.ko] undefined! Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- drivers/gpu/stub/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/stub/Kconfig b/drivers/gpu/stub/Kconfig index 09aea5f1556..70e60a4bb67 100644 --- a/drivers/gpu/stub/Kconfig +++ b/drivers/gpu/stub/Kconfig @@ -1,11 +1,13 @@ config STUB_POULSBO tristate "Intel GMA500 Stub Driver" depends on PCI + depends on NET # for THERMAL # Poulsbo stub depends on ACPI_VIDEO when ACPI is enabled # but for select to work, need to select ACPI_VIDEO's dependencies, ick select BACKLIGHT_CLASS_DEVICE if ACPI select INPUT if ACPI select ACPI_VIDEO if ACPI + select THERMAL if ACPI help Choose this option if you have a system that has Intel GMA500 (Poulsbo) integrated graphics. If M is selected, the module will -- cgit v1.2.3-18-g5258 From fdf4c587a793ba87935e38e7f25a9540bc9a7b95 Mon Sep 17 00:00:00 2001 From: Michel Lespinasse Date: Mon, 31 Jan 2011 17:03:41 -0800 Subject: mlock: operate on any regions with protection != PROT_NONE As Tao Ma noticed, change 5ecfda0 breaks blktrace. This is because blktrace mmaps a file with PROT_WRITE permissions but without PROT_READ, so my attempt to not unnecessarity break COW during mlock ended up causing mlock to fail with a permission problem. I am proposing to let mlock ignore vma protection in all cases except PROT_NONE. In particular, mlock should not fail for PROT_WRITE regions (as in the blktrace case, which broke at 5ecfda0) or for PROT_EXEC regions (which seem to me like they were always broken). Signed-off-by: Michel Lespinasse Acked-by: Rik van Riel Signed-off-by: Linus Torvalds --- mm/mlock.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/mm/mlock.c b/mm/mlock.c index 13e81ee8be9..c3924c7f00b 100644 --- a/mm/mlock.c +++ b/mm/mlock.c @@ -178,6 +178,13 @@ static long __mlock_vma_pages_range(struct vm_area_struct *vma, if ((vma->vm_flags & (VM_WRITE | VM_SHARED)) == VM_WRITE) gup_flags |= FOLL_WRITE; + /* + * We want mlock to succeed for regions that have any permissions + * other than PROT_NONE. + */ + if (vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC)) + gup_flags |= FOLL_FORCE; + if (vma->vm_flags & VM_LOCKED) gup_flags |= FOLL_MLOCK; -- cgit v1.2.3-18-g5258 From a89e828397abbefdc5c3b707521f6b73471b43c8 Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Tue, 1 Feb 2011 15:41:13 -0800 Subject: be2net: fix a crash seen during insmod/rmmod test While running insmod/rmood in a loop, an unnecessary netif_stop_queue causes the system to crash. Remove the netif_stop_queue call and netif_start_queue in the link status update path. Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/benet/be_main.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index de40d3b7152..9aaf1ef704e 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -312,11 +312,9 @@ void be_link_status_update(struct be_adapter *adapter, bool link_up) if (adapter->link_up != link_up) { adapter->link_speed = -1; if (link_up) { - netif_start_queue(netdev); netif_carrier_on(netdev); printk(KERN_INFO "%s: Link up\n", netdev->name); } else { - netif_stop_queue(netdev); netif_carrier_off(netdev); printk(KERN_INFO "%s: Link down\n", netdev->name); } -- cgit v1.2.3-18-g5258 From 9b6cefd6593c2b661e0052d53f2fff6fc5463975 Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Tue, 1 Feb 2011 15:41:59 -0800 Subject: be2net: remove netif_stop_queue being called before register_netdev. It is illegal to call netif_stop_queue before register_netdev. Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/benet/be_main.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 9aaf1ef704e..28a32a6c8bf 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -2626,8 +2626,6 @@ static void be_netdev_init(struct net_device *netdev) netif_napi_add(netdev, &adapter->tx_eq.napi, be_poll_tx_mcc, BE_NAPI_WEIGHT); - - netif_stop_queue(netdev); } static void be_unmap_pci_bars(struct be_adapter *adapter) -- cgit v1.2.3-18-g5258 From 9587fcff42f5bece3c0a44066b079235ee73cbb3 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Tue, 1 Feb 2011 08:40:43 -0500 Subject: cifs: fix length vs. total_read confusion in cifs_demultiplex_thread length at this point is the length returned by the last kernel_recvmsg call. total_read is the length of all of the data read so far. length is more or less meaningless at this point, so use total_read for everything. Signed-off-by: Jeff Layton Reviewed-by: Pavel Shilovsky Signed-off-by: Steve French --- fs/cifs/connect.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 47d8ff62368..945b2202275 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -578,12 +578,12 @@ incomplete_rcv: else if (reconnect == 1) continue; - length += 4; /* account for rfc1002 hdr */ + total_read += 4; /* account for rfc1002 hdr */ - - dump_smb(smb_buffer, length); - if (checkSMB(smb_buffer, smb_buffer->Mid, total_read+4)) { - cifs_dump_mem("Bad SMB: ", smb_buffer, 48); + dump_smb(smb_buffer, total_read); + if (checkSMB(smb_buffer, smb_buffer->Mid, total_read)) { + cifs_dump_mem("Bad SMB: ", smb_buffer, + total_read < 48 ? total_read : 48); continue; } -- cgit v1.2.3-18-g5258 From 8c06a3e02062a9beb71a9444c49fb0fbcaa1eed3 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Sun, 30 Jan 2011 10:54:11 +0100 Subject: drm/nouveau: correctly pair hwmon_init and hwmon_fini I broke this with my commit 07cfe0e7a820ecad078c04e9c2a102521709145d This fixes fdo #33434 Signed-off-by: Lucas Stach Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_pm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_pm.c b/drivers/gpu/drm/nouveau/nouveau_pm.c index fb846a3fef1..f05c0cddfec 100644 --- a/drivers/gpu/drm/nouveau/nouveau_pm.c +++ b/drivers/gpu/drm/nouveau/nouveau_pm.c @@ -443,7 +443,7 @@ nouveau_hwmon_fini(struct drm_device *dev) struct nouveau_pm_engine *pm = &dev_priv->engine.pm; if (pm->hwmon) { - sysfs_remove_group(&pm->hwmon->kobj, &hwmon_attrgroup); + sysfs_remove_group(&dev->pdev->dev.kobj, &hwmon_attrgroup); hwmon_device_unregister(pm->hwmon); } #endif -- cgit v1.2.3-18-g5258 From c4534fdf5603ef53fce2f418df7b5a19e71281e3 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 31 Jan 2011 16:23:27 +1000 Subject: drm/nv50: fix display on 0x50 Accidently busted a while back. We'll be creating objects that aren't necessary here, but, they're never used so no harm.. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv50_evo.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nv50_evo.c b/drivers/gpu/drm/nouveau/nv50_evo.c index 14e24e906ee..0ea090f4244 100644 --- a/drivers/gpu/drm/nouveau/nv50_evo.c +++ b/drivers/gpu/drm/nouveau/nv50_evo.c @@ -283,8 +283,7 @@ nv50_evo_create(struct drm_device *dev) nv50_evo_channel_del(&dev_priv->evo); return ret; } - } else - if (dev_priv->chipset != 0x50) { + } else { ret = nv50_evo_dmaobj_new(evo, 0x3d, NvEvoFB16, 0x70, 0x19, 0, 0xffffffff, 0x00010000); if (ret) { -- cgit v1.2.3-18-g5258 From c6751b2bde477f56ceef67aa1d298ce44e8e2e23 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 2 Feb 2011 11:57:13 +1100 Subject: md: Don't allow slot_store while resync/recovery is happening. Activating a spare in an array while resync/recovery is already happening can lead the that spare being marked in-sync when it isn't really. So don't allow the 'slot' to be set (this activating the device) while resync/recovery is happening. Signed-off-by: NeilBrown --- drivers/md/md.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/md/md.c b/drivers/md/md.c index f2d5628d51c..1138d1053e9 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -2463,6 +2463,9 @@ slot_store(mdk_rdev_t *rdev, const char *buf, size_t len) if (rdev->raid_disk != -1) return -EBUSY; + if (test_bit(MD_RECOVERY_RUNNING, &rdev->mddev->recovery)) + return -EBUSY; + if (rdev->mddev->pers->hot_add_disk == NULL) return -EINVAL; -- cgit v1.2.3-18-g5258 From 20d391d72519527d2266a0166490118b40ff998d Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 1 Feb 2011 16:12:34 -0500 Subject: drm/radeon/kms: rv6xx+ thermal sensor fixes Some fixes to the thermal sensor code: - handle negative numbers - properly handle temp calculation on different asics Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/evergreen.c | 21 ++++++++++++--------- drivers/gpu/drm/radeon/r600.c | 8 ++++++-- drivers/gpu/drm/radeon/radeon.h | 8 ++++---- drivers/gpu/drm/radeon/radeon_pm.c | 2 +- drivers/gpu/drm/radeon/rv770.c | 23 ++++++++++++++--------- 5 files changed, 37 insertions(+), 25 deletions(-) diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 677af91b555..5a11fec98fb 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -97,26 +97,29 @@ u32 evergreen_page_flip(struct radeon_device *rdev, int crtc_id, u64 crtc_base) } /* get temperature in millidegrees */ -u32 evergreen_get_temp(struct radeon_device *rdev) +int evergreen_get_temp(struct radeon_device *rdev) { u32 temp = (RREG32(CG_MULT_THERMAL_STATUS) & ASIC_T_MASK) >> ASIC_T_SHIFT; u32 actual_temp = 0; - if ((temp >> 10) & 1) - actual_temp = 0; - else if ((temp >> 9) & 1) + if (temp & 0x400) + actual_temp = -256; + else if (temp & 0x200) actual_temp = 255; - else - actual_temp = (temp >> 1) & 0xff; + else if (temp & 0x100) { + actual_temp = temp & 0x1ff; + actual_temp |= ~0x1ff; + } else + actual_temp = temp & 0xff; - return actual_temp * 1000; + return (actual_temp * 1000) / 2; } -u32 sumo_get_temp(struct radeon_device *rdev) +int sumo_get_temp(struct radeon_device *rdev) { u32 temp = RREG32(CG_THERMAL_STATUS) & 0xff; - u32 actual_temp = (temp >> 1) & 0xff; + int actual_temp = temp - 49; return actual_temp * 1000; } diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 1e10e3e2ba2..650672a0f5a 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -97,12 +97,16 @@ void r600_irq_disable(struct radeon_device *rdev); static void r600_pcie_gen2_enable(struct radeon_device *rdev); /* get temperature in millidegrees */ -u32 rv6xx_get_temp(struct radeon_device *rdev) +int rv6xx_get_temp(struct radeon_device *rdev) { u32 temp = (RREG32(CG_THERMAL_STATUS) & ASIC_T_MASK) >> ASIC_T_SHIFT; + int actual_temp = temp & 0xff; - return temp * 1000; + if (temp & 0x100) + actual_temp -= 256; + + return actual_temp * 1000; } void r600_pm_get_dynpm_state(struct radeon_device *rdev) diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 71d2a554bbe..4f29d445d03 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -179,10 +179,10 @@ void radeon_combios_get_power_modes(struct radeon_device *rdev); void radeon_atombios_get_power_modes(struct radeon_device *rdev); void radeon_atom_set_voltage(struct radeon_device *rdev, u16 level); void rs690_pm_info(struct radeon_device *rdev); -extern u32 rv6xx_get_temp(struct radeon_device *rdev); -extern u32 rv770_get_temp(struct radeon_device *rdev); -extern u32 evergreen_get_temp(struct radeon_device *rdev); -extern u32 sumo_get_temp(struct radeon_device *rdev); +extern int rv6xx_get_temp(struct radeon_device *rdev); +extern int rv770_get_temp(struct radeon_device *rdev); +extern int evergreen_get_temp(struct radeon_device *rdev); +extern int sumo_get_temp(struct radeon_device *rdev); /* * Fences. diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c index 3b1b2bf9cdd..813620034a3 100644 --- a/drivers/gpu/drm/radeon/radeon_pm.c +++ b/drivers/gpu/drm/radeon/radeon_pm.c @@ -430,7 +430,7 @@ static ssize_t radeon_hwmon_show_temp(struct device *dev, { struct drm_device *ddev = pci_get_drvdata(to_pci_dev(dev)); struct radeon_device *rdev = ddev->dev_private; - u32 temp; + int temp; switch (rdev->pm.int_thermal_type) { case THERMAL_TYPE_RV6XX: diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 491dc900065..2211a323db4 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -78,18 +78,23 @@ u32 rv770_page_flip(struct radeon_device *rdev, int crtc_id, u64 crtc_base) } /* get temperature in millidegrees */ -u32 rv770_get_temp(struct radeon_device *rdev) +int rv770_get_temp(struct radeon_device *rdev) { u32 temp = (RREG32(CG_MULT_THERMAL_STATUS) & ASIC_T_MASK) >> ASIC_T_SHIFT; - u32 actual_temp = 0; - - if ((temp >> 9) & 1) - actual_temp = 0; - else - actual_temp = (temp >> 1) & 0xff; - - return actual_temp * 1000; + int actual_temp; + + if (temp & 0x400) + actual_temp = -256; + else if (temp & 0x200) + actual_temp = 255; + else if (temp & 0x100) { + actual_temp = temp & 0x1ff; + actual_temp |= ~0x1ff; + } else + actual_temp = temp & 0xff; + + return (actual_temp * 1000) / 2; } void rv770_pm_misc(struct radeon_device *rdev) -- cgit v1.2.3-18-g5258 From a6f9761743bf35b052180f4a8bdae4d2cc0465f6 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 31 Jan 2011 16:48:50 -0500 Subject: drm/radeon/kms: switch back to min->max pll post divider iteration Seems more reliable. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=26552 Signed-off-by: Alex Deucher Cc: stable@kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index d26dabf878d..71788e942cb 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -849,7 +849,7 @@ void radeon_compute_pll(struct radeon_pll *pll, max_fractional_feed_div = pll->max_frac_feedback_div; } - for (post_div = max_post_div; post_div >= min_post_div; --post_div) { + for (post_div = min_post_div; post_div <= max_post_div; ++post_div) { uint32_t ref_div; if ((pll->flags & RADEON_PLL_NO_ODD_POST_DIV) && (post_div & 1)) -- cgit v1.2.3-18-g5258 From 51d4bf840a27fe02c883ddc6d9708af056773769 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 31 Jan 2011 16:48:51 -0500 Subject: drm/radeon/kms: add pll debugging output Signed-off-by: Alex Deucher Cc: stable@kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_display.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 71788e942cb..367365652e9 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -965,6 +965,10 @@ void radeon_compute_pll(struct radeon_pll *pll, *frac_fb_div_p = best_frac_feedback_div; *ref_div_p = best_ref_div; *post_div_p = best_post_div; + DRM_DEBUG_KMS("%d %d, pll dividers - fb: %d.%d ref: %d, post %d\n", + freq, best_freq / 1000, best_feedback_div, best_frac_feedback_div, + best_ref_div, best_post_div); + } static void radeon_user_framebuffer_destroy(struct drm_framebuffer *fb) -- cgit v1.2.3-18-g5258 From f523f74eac1897b13c05c88ce6e5de0a7c34578b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 31 Jan 2011 16:48:52 -0500 Subject: drm/radeon/kms: add new pll algo for avivo asics Based on the vbios code. This should hopefully fix the pll problems on a number of avivo asics once it's enabled. Signed-off-by: Alex Deucher Cc: stable@kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 4 +- drivers/gpu/drm/radeon/radeon_display.c | 123 ++++++++++++++++++++++++++-- drivers/gpu/drm/radeon/radeon_legacy_crtc.c | 6 +- drivers/gpu/drm/radeon/radeon_mode.h | 23 ++++-- 4 files changed, 137 insertions(+), 19 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 842954fe74c..4374168b75b 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -951,8 +951,8 @@ static void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode /* adjust pixel clock as needed */ adjusted_clock = atombios_adjust_pll(crtc, mode, pll, ss_enabled, &ss); - radeon_compute_pll(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div, - &ref_div, &post_div); + radeon_compute_pll_legacy(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div, + &ref_div, &post_div); atombios_crtc_program_ss(crtc, ATOM_DISABLE, radeon_crtc->pll_id, &ss); diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 367365652e9..5fda820959e 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -780,6 +780,115 @@ static int radeon_ddc_dump(struct drm_connector *connector) return ret; } +/* avivo */ +static void avivo_get_fb_div(struct radeon_pll *pll, + u32 target_clock, + u32 post_div, + u32 ref_div, + u32 *fb_div, + u32 *frac_fb_div) +{ + u32 tmp = post_div * ref_div; + + tmp *= target_clock; + *fb_div = tmp / pll->reference_freq; + *frac_fb_div = tmp % pll->reference_freq; +} + +static u32 avivo_get_post_div(struct radeon_pll *pll, + u32 target_clock) +{ + u32 vco, post_div, tmp; + + if (pll->flags & RADEON_PLL_USE_POST_DIV) + return pll->post_div; + + if (pll->flags & RADEON_PLL_PREFER_MINM_OVER_MAXP) { + if (pll->flags & RADEON_PLL_IS_LCD) + vco = pll->lcd_pll_out_min; + else + vco = pll->pll_out_min; + } else { + if (pll->flags & RADEON_PLL_IS_LCD) + vco = pll->lcd_pll_out_max; + else + vco = pll->pll_out_max; + } + + post_div = vco / target_clock; + tmp = vco % target_clock; + + if (pll->flags & RADEON_PLL_PREFER_MINM_OVER_MAXP) { + if (tmp) + post_div++; + } else { + if (!tmp) + post_div--; + } + + return post_div; +} + +#define MAX_TOLERANCE 10 + +void radeon_compute_pll_avivo(struct radeon_pll *pll, + u32 freq, + u32 *dot_clock_p, + u32 *fb_div_p, + u32 *frac_fb_div_p, + u32 *ref_div_p, + u32 *post_div_p) +{ + u32 target_clock = freq / 10; + u32 post_div = avivo_get_post_div(pll, target_clock); + u32 ref_div = pll->min_ref_div; + u32 fb_div = 0, frac_fb_div = 0, tmp; + + if (pll->flags & RADEON_PLL_USE_REF_DIV) + ref_div = pll->reference_div; + + if (pll->flags & RADEON_PLL_USE_FRAC_FB_DIV) { + avivo_get_fb_div(pll, target_clock, post_div, ref_div, &fb_div, &frac_fb_div); + frac_fb_div = (100 * frac_fb_div) / pll->reference_freq; + if (frac_fb_div >= 5) { + frac_fb_div -= 5; + frac_fb_div = frac_fb_div / 10; + frac_fb_div++; + } + if (frac_fb_div >= 10) { + fb_div++; + frac_fb_div = 0; + } + } else { + while (ref_div <= pll->max_ref_div) { + avivo_get_fb_div(pll, target_clock, post_div, ref_div, + &fb_div, &frac_fb_div); + if (frac_fb_div >= (pll->reference_freq / 2)) + fb_div++; + frac_fb_div = 0; + tmp = (pll->reference_freq * fb_div) / (post_div * ref_div); + tmp = (tmp * 10000) / target_clock; + + if (tmp > (10000 + MAX_TOLERANCE)) + ref_div++; + else if (tmp >= (10000 - MAX_TOLERANCE)) + break; + else + ref_div++; + } + } + + *dot_clock_p = ((pll->reference_freq * fb_div * 10) + (pll->reference_freq * frac_fb_div)) / + (ref_div * post_div * 10); + *fb_div_p = fb_div; + *frac_fb_div_p = frac_fb_div; + *ref_div_p = ref_div; + *post_div_p = post_div; + DRM_DEBUG_KMS("%d, pll dividers - fb: %d.%d ref: %d, post %d\n", + *dot_clock_p, fb_div, frac_fb_div, ref_div, post_div); +} + +/* pre-avivo */ static inline uint32_t radeon_div(uint64_t n, uint32_t d) { uint64_t mod; @@ -790,13 +899,13 @@ static inline uint32_t radeon_div(uint64_t n, uint32_t d) return n; } -void radeon_compute_pll(struct radeon_pll *pll, - uint64_t freq, - uint32_t *dot_clock_p, - uint32_t *fb_div_p, - uint32_t *frac_fb_div_p, - uint32_t *ref_div_p, - uint32_t *post_div_p) +void radeon_compute_pll_legacy(struct radeon_pll *pll, + uint64_t freq, + uint32_t *dot_clock_p, + uint32_t *fb_div_p, + uint32_t *frac_fb_div_p, + uint32_t *ref_div_p, + uint32_t *post_div_p) { uint32_t min_ref_div = pll->min_ref_div; uint32_t max_ref_div = pll->max_ref_div; diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c index ace2e6384d4..cf0638c3b7c 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c @@ -778,9 +778,9 @@ static void radeon_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) DRM_DEBUG_KMS("\n"); if (!use_bios_divs) { - radeon_compute_pll(pll, mode->clock, - &freq, &feedback_div, &frac_fb_div, - &reference_div, &post_divider); + radeon_compute_pll_legacy(pll, mode->clock, + &freq, &feedback_div, &frac_fb_div, + &reference_div, &post_divider); for (post_div = &post_divs[0]; post_div->divider; ++post_div) { if (post_div->divider == post_divider) diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index 12bdeab91c8..6794cdf91f2 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -149,6 +149,7 @@ struct radeon_tmds_pll { #define RADEON_PLL_PREFER_CLOSEST_LOWER (1 << 11) #define RADEON_PLL_USE_POST_DIV (1 << 12) #define RADEON_PLL_IS_LCD (1 << 13) +#define RADEON_PLL_PREFER_MINM_OVER_MAXP (1 << 14) struct radeon_pll { /* reference frequency */ @@ -510,13 +511,21 @@ extern bool radeon_atombios_get_asic_ss_info(struct radeon_device *rdev, struct radeon_atom_ss *ss, int id, u32 clock); -extern void radeon_compute_pll(struct radeon_pll *pll, - uint64_t freq, - uint32_t *dot_clock_p, - uint32_t *fb_div_p, - uint32_t *frac_fb_div_p, - uint32_t *ref_div_p, - uint32_t *post_div_p); +extern void radeon_compute_pll_legacy(struct radeon_pll *pll, + uint64_t freq, + uint32_t *dot_clock_p, + uint32_t *fb_div_p, + uint32_t *frac_fb_div_p, + uint32_t *ref_div_p, + uint32_t *post_div_p); + +extern void radeon_compute_pll_avivo(struct radeon_pll *pll, + u32 freq, + u32 *dot_clock_p, + u32 *fb_div_p, + u32 *frac_fb_div_p, + u32 *ref_div_p, + u32 *post_div_p); extern void radeon_setup_encoder_clones(struct drm_device *dev); -- cgit v1.2.3-18-g5258 From 619efb105924d8cafa0c1dd9389e9ab506f5425d Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 31 Jan 2011 16:48:53 -0500 Subject: drm/radeon/kms: Enable new pll calculation for avivo+ asics New algo is used for r5xx+ and legacy is used for r1xx-r4xx, rv515. I've tested on all relevant GPUs and monitors that I have access to and have found no problems. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=26562 https://bugzilla.kernel.org/show_bug.cgi?id=26552 May fix: https://bugs.freedesktop.org/show_bug.cgi?id=32556 Signed-off-by: Alex Deucher Cc: stable@kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 18 ++++++++++++++++-- drivers/gpu/drm/radeon/radeon_atombios.c | 10 ---------- drivers/gpu/drm/radeon/radeon_display.c | 3 +++ 3 files changed, 19 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 4374168b75b..b1537000a10 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -555,6 +555,7 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc, dp_clock = dig_connector->dp_clock; } } +/* this might work properly with the new pll algo */ #if 0 /* doesn't work properly on some laptops */ /* use recommended ref_div for ss */ if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) { @@ -572,6 +573,11 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc, adjusted_clock = mode->clock * 2; if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT)) pll->flags |= RADEON_PLL_PREFER_CLOSEST_LOWER; + /* rv515 needs more testing with this option */ + if (rdev->family != CHIP_RV515) { + if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) + pll->flags |= RADEON_PLL_IS_LCD; + } } else { if (encoder->encoder_type != DRM_MODE_ENCODER_DAC) pll->flags |= RADEON_PLL_NO_ODD_POST_DIV; @@ -951,8 +957,16 @@ static void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode /* adjust pixel clock as needed */ adjusted_clock = atombios_adjust_pll(crtc, mode, pll, ss_enabled, &ss); - radeon_compute_pll_legacy(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div, - &ref_div, &post_div); + /* rv515 seems happier with the old algo */ + if (rdev->family == CHIP_RV515) + radeon_compute_pll_legacy(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div, + &ref_div, &post_div); + else if (ASIC_IS_AVIVO(rdev)) + radeon_compute_pll_avivo(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div, + &ref_div, &post_div); + else + radeon_compute_pll_legacy(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div, + &ref_div, &post_div); atombios_crtc_program_ss(crtc, ATOM_DISABLE, radeon_crtc->pll_id, &ss); diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 52777902bbc..4dc9c518c2f 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -1163,16 +1163,6 @@ bool radeon_atom_get_clock_info(struct drm_device *dev) p1pll->pll_out_min = 64800; else p1pll->pll_out_min = 20000; - } else if (p1pll->pll_out_min > 64800) { - /* Limiting the pll output range is a good thing generally as - * it limits the number of possible pll combinations for a given - * frequency presumably to the ones that work best on each card. - * However, certain duallink DVI monitors seem to like - * pll combinations that would be limited by this at least on - * pre-DCE 3.0 r6xx hardware. This might need to be adjusted per - * family. - */ - p1pll->pll_out_min = 64800; } p1pll->pll_in_min = diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 5fda820959e..2eff98cfd72 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -935,6 +935,9 @@ void radeon_compute_pll_legacy(struct radeon_pll *pll, pll_out_max = pll->pll_out_max; } + if (pll_out_min > 64800) + pll_out_min = 64800; + if (pll->flags & RADEON_PLL_USE_REF_DIV) min_ref_div = max_ref_div = pll->reference_div; else { -- cgit v1.2.3-18-g5258 From 63a507800c8aca5a1891d598ae13f829346e8e39 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 1 Feb 2011 19:06:46 -0500 Subject: drm/radeon: remove 0x4243 pci id 0x4243 is a PCI bridge, not a GPU. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=33815 Signed-off-by: Alex Deucher Cc: stable@kernel.org Signed-off-by: Dave Airlie --- include/drm/drm_pciids.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h index fe29ae328bd..5ff1194dc2e 100644 --- a/include/drm/drm_pciids.h +++ b/include/drm/drm_pciids.h @@ -28,7 +28,6 @@ {0x1002, 0x4156, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \ {0x1002, 0x4237, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS200|RADEON_IS_IGP}, \ {0x1002, 0x4242, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \ - {0x1002, 0x4243, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \ {0x1002, 0x4336, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS100|RADEON_IS_IGP|RADEON_IS_MOBILITY}, \ {0x1002, 0x4337, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS200|RADEON_IS_IGP|RADEON_IS_MOBILITY}, \ {0x1002, 0x4437, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS200|RADEON_IS_IGP|RADEON_IS_MOBILITY}, \ -- cgit v1.2.3-18-g5258 From e733fb62082b3b187870dfba28d5f6730b8436c4 Mon Sep 17 00:00:00 2001 From: Bao Liang Date: Sat, 29 Jan 2011 21:39:37 +0800 Subject: Bluetooth: Set conn state to BT_DISCONN to avoid multiple responses This patch fixes a minor issue that two connection responses will be sent for one L2CAP connection request. If the L2CAP connection request is first blocked due to security reason and responded with reason "security block", the state of the connection remains BT_CONNECT2. If a pairing procedure completes successfully before the ACL connection is down, local host will send another connection complete response. See the following packets captured by hcidump. 2010-12-07 22:21:24.928096 < ACL data: handle 12 flags 0x00 dlen 16 0000: 0c 00 01 00 03 19 08 00 41 00 53 00 03 00 00 00 ........A.S..... ... ... 2010-12-07 22:21:35.791747 > HCI Event: Auth Complete (0x06) plen 3 status 0x00 handle 12 ... ... 2010-12-07 22:21:35.872372 > ACL data: handle 12 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0054 scid 0x0040 result 0 status 0 Connection successful Signed-off-by: Liang Bao Acked-by: Ville Tervo Signed-off-by: Gustavo F. Padovan --- net/bluetooth/l2cap.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index 7550abb0c96..675614e38e1 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -859,6 +859,7 @@ static void __l2cap_sock_close(struct sock *sk, int reason) result = L2CAP_CR_SEC_BLOCK; else result = L2CAP_CR_BAD_PSM; + sk->sk_state = BT_DISCONN; rsp.scid = cpu_to_le16(l2cap_pi(sk)->dcid); rsp.dcid = cpu_to_le16(l2cap_pi(sk)->scid); -- cgit v1.2.3-18-g5258 From 71a77e07d0e33b57d4a50c173e5ce4fabceddbec Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 2 Feb 2011 12:13:49 +0000 Subject: drm/i915: Invalidate TLB caches on SNB BLT/BSD rings Signed-off-by: Chris Wilson Cc: stable@kernel.org --- drivers/gpu/drm/i915/i915_reg.h | 4 +++- drivers/gpu/drm/i915/intel_ringbuffer.c | 26 ++++++++++++++++---------- 2 files changed, 19 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 5cfc68940f1..15d94c63918 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -174,7 +174,9 @@ * address/value pairs. Don't overdue it, though, x <= 2^4 must hold! */ #define MI_LOAD_REGISTER_IMM(x) MI_INSTR(0x22, 2*x-1) -#define MI_FLUSH_DW MI_INSTR(0x26, 2) /* for GEN6 */ +#define MI_FLUSH_DW MI_INSTR(0x26, 1) /* for GEN6 */ +#define MI_INVALIDATE_TLB (1<<18) +#define MI_INVALIDATE_BSD (1<<7) #define MI_BATCH_BUFFER MI_INSTR(0x30, 1) #define MI_BATCH_NON_SECURE (1) #define MI_BATCH_NON_SECURE_I965 (1<<8) diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index 6218fa97aa1..445f27efe67 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -1059,22 +1059,25 @@ static void gen6_bsd_ring_write_tail(struct intel_ring_buffer *ring, } static int gen6_ring_flush(struct intel_ring_buffer *ring, - u32 invalidate_domains, - u32 flush_domains) + u32 invalidate, u32 flush) { + uint32_t cmd; int ret; - if ((flush_domains & I915_GEM_DOMAIN_RENDER) == 0) + if (((invalidate | flush) & I915_GEM_GPU_DOMAINS) == 0) return 0; ret = intel_ring_begin(ring, 4); if (ret) return ret; - intel_ring_emit(ring, MI_FLUSH_DW); - intel_ring_emit(ring, 0); + cmd = MI_FLUSH_DW; + if (invalidate & I915_GEM_GPU_DOMAINS) + cmd |= MI_INVALIDATE_TLB | MI_INVALIDATE_BSD; + intel_ring_emit(ring, cmd); intel_ring_emit(ring, 0); intel_ring_emit(ring, 0); + intel_ring_emit(ring, MI_NOOP); intel_ring_advance(ring); return 0; } @@ -1230,22 +1233,25 @@ static int blt_ring_begin(struct intel_ring_buffer *ring, } static int blt_ring_flush(struct intel_ring_buffer *ring, - u32 invalidate_domains, - u32 flush_domains) + u32 invalidate, u32 flush) { + uint32_t cmd; int ret; - if ((flush_domains & I915_GEM_DOMAIN_RENDER) == 0) + if (((invalidate | flush) & I915_GEM_DOMAIN_RENDER) == 0) return 0; ret = blt_ring_begin(ring, 4); if (ret) return ret; - intel_ring_emit(ring, MI_FLUSH_DW); - intel_ring_emit(ring, 0); + cmd = MI_FLUSH_DW; + if (invalidate & I915_GEM_DOMAIN_RENDER) + cmd |= MI_INVALIDATE_TLB; + intel_ring_emit(ring, cmd); intel_ring_emit(ring, 0); intel_ring_emit(ring, 0); + intel_ring_emit(ring, MI_NOOP); intel_ring_advance(ring); return 0; } -- cgit v1.2.3-18-g5258 From 70f7db11c45a313b23922cacf248c613c3b2144c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 2 Feb 2011 17:16:38 +0100 Subject: ALSA: hda - Fix memory leaks in conexant jack arrays The Conexant codec driver adds the jack arrays in init callback which may be called also in each PM resume. This results in the addition of new jack element at each time. The fix is to check whether the requested jack is already present in the array. Reference: Novell bug 668929 https://bugzilla.novell.com/show_bug.cgi?id=668929 Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_conexant.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 7e1ca43bd66..fbe97d32140 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -407,10 +407,16 @@ static int conexant_add_jack(struct hda_codec *codec, struct conexant_spec *spec; struct conexant_jack *jack; const char *name; - int err; + int i, err; spec = codec->spec; snd_array_init(&spec->jacks, sizeof(*jack), 32); + + jack = spec->jacks.list; + for (i = 0; i < spec->jacks.used; i++, jack++) + if (jack->nid == nid) + return 0 ; /* already present */ + jack = snd_array_new(&spec->jacks); name = (type == SND_JACK_HEADPHONE) ? "Headphone" : "Mic" ; -- cgit v1.2.3-18-g5258 From ddfb319926462fd9670b7c1678a1f6a14a68e421 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 2 Feb 2011 17:49:53 +0100 Subject: ALSA: use linux/io.h to fix compile warnings For helping to reduce Greert's regression list... src/sound/drivers/mtpav.c: error: implicit declaration of function 'inb' src/sound/drivers/mtpav.c: error: implicit declaration of function 'outb' ... Signed-off-by: Takashi Iwai --- sound/drivers/mtpav.c | 3 +-- sound/pcmcia/pdaudiocf/pdaudiocf.h | 2 +- sound/pcmcia/vx/vxp_ops.c | 2 +- 3 files changed, 3 insertions(+), 4 deletions(-) diff --git a/sound/drivers/mtpav.c b/sound/drivers/mtpav.c index da03597fc89..5c426df8767 100644 --- a/sound/drivers/mtpav.c +++ b/sound/drivers/mtpav.c @@ -55,14 +55,13 @@ #include #include #include +#include #include #include #include #include #include -#include - /* * globals */ diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf.h b/sound/pcmcia/pdaudiocf/pdaudiocf.h index bd26e092aea..6ce9ad70029 100644 --- a/sound/pcmcia/pdaudiocf/pdaudiocf.h +++ b/sound/pcmcia/pdaudiocf/pdaudiocf.h @@ -22,7 +22,7 @@ #define __PDAUDIOCF_H #include -#include +#include #include #include #include diff --git a/sound/pcmcia/vx/vxp_ops.c b/sound/pcmcia/vx/vxp_ops.c index 989e04abb52..fe33e122e37 100644 --- a/sound/pcmcia/vx/vxp_ops.c +++ b/sound/pcmcia/vx/vxp_ops.c @@ -23,8 +23,8 @@ #include #include #include +#include #include -#include #include "vxpocket.h" -- cgit v1.2.3-18-g5258 From 0962bb217ac74c4b8fae34c5367ebc63131c962c Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Wed, 2 Feb 2011 21:11:41 +0100 Subject: ASoC: fill in snd_soc_pcm_runtime.card before calling snd_soc_dai_link.init() The .card member of the snd_soc_pcm_runtime structure pointed to by the snd_soc_dai_link.init() argument used to be initialized before the function being called. This has changed, probably unintentionally, after recent refactorings. Since the function implementations are free to make use of this pointer, move its assignment back before the function is called to avoid NULL pointer dereferences. Created and tested on Amstrad Delta againts linux-2.6.38-rc2 Signed-off-by: Janusz Krzysztofik Signed-off-by: Mark Brown --- sound/soc/soc-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index c4b60610beb..c3f6f1e7279 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1449,6 +1449,7 @@ static int soc_post_component_init(struct snd_soc_card *card, rtd = &card->rtd_aux[num]; name = aux_dev->name; } + rtd->card = card; /* machine controls, routes and widgets are not prefixed */ temp = codec->name_prefix; @@ -1471,7 +1472,6 @@ static int soc_post_component_init(struct snd_soc_card *card, /* register the rtd device */ rtd->codec = codec; - rtd->card = card; rtd->dev.parent = card->dev; rtd->dev.release = rtd_release; rtd->dev.init_name = name; -- cgit v1.2.3-18-g5258 From f1a06390d013244e721372b3f9b66e39b6429c71 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 28 Jan 2011 08:47:15 +0100 Subject: genirq: Prevent irq storm on migration move_native_irq() masks and unmasks the interrupt line unconditionally, but the interrupt line might be masked due to a threaded oneshot handler in progress. Unmasking the line in that case can lead to interrupt storms. Observed on PREEMPT_RT. Originally-from: Ingo Molnar Signed-off-by: Thomas Gleixner Cc: stable@kernel.org --- kernel/irq/migration.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/kernel/irq/migration.c b/kernel/irq/migration.c index 1d254194048..441fd629ff0 100644 --- a/kernel/irq/migration.c +++ b/kernel/irq/migration.c @@ -56,6 +56,7 @@ void move_masked_irq(int irq) void move_native_irq(int irq) { struct irq_desc *desc = irq_to_desc(irq); + bool masked; if (likely(!(desc->status & IRQ_MOVE_PENDING))) return; @@ -63,8 +64,15 @@ void move_native_irq(int irq) if (unlikely(desc->status & IRQ_DISABLED)) return; - desc->irq_data.chip->irq_mask(&desc->irq_data); + /* + * Be careful vs. already masked interrupts. If this is a + * threaded interrupt with ONESHOT set, we can end up with an + * interrupt storm. + */ + masked = desc->status & IRQ_MASKED; + if (!masked) + desc->irq_data.chip->irq_mask(&desc->irq_data); move_masked_irq(irq); - desc->irq_data.chip->irq_unmask(&desc->irq_data); + if (!masked) + desc->irq_data.chip->irq_unmask(&desc->irq_data); } - -- cgit v1.2.3-18-g5258 From ff458edc0c5ec42b299547fb7eb9790a4aecc632 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Mon, 31 Jan 2011 13:56:03 -0800 Subject: iwlagn: overwrite EEPROM chain setting for 6250 devices 6250 2x2 devices have 2 tx chain and 2 rx chain. For some reason, the EEPROM contain incorrect information and indicate it only has single tx chain. overwrite it with .cfg parameter to make sure both chain 'A' and chain 'B' can be used for transmit and receive Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-6000.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index af505bcd7ae..ef36aff1bb4 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -681,6 +681,8 @@ struct iwl_cfg iwl6000i_2bg_cfg = { .fw_name_pre = IWL6050_FW_PRE, \ .ucode_api_max = IWL6050_UCODE_API_MAX, \ .ucode_api_min = IWL6050_UCODE_API_MIN, \ + .valid_tx_ant = ANT_AB, /* .cfg overwrite */ \ + .valid_rx_ant = ANT_AB, /* .cfg overwrite */ \ .ops = &iwl6050_ops, \ .eeprom_ver = EEPROM_6050_EEPROM_VERSION, \ .eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION, \ -- cgit v1.2.3-18-g5258 From 4334ec8518cec3f7a4feeb3dacb46acfb24904d4 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 2 Feb 2011 16:58:06 +0100 Subject: mac80211: fix TX status cookie in HW offload case When the off-channel TX is done with remain-on-channel offloaded to hardware, the reported cookie is wrong as in that case we shouldn't use the SKB as the cookie but need to instead use the corresponding r-o-c cookie (XOR'ed with 2 to prevent API mismatches). Fix this by keeping track of the hw_roc_skb pointer just for the status processing and use the correct cookie to report in this case. We can't use the hw_roc_skb pointer itself because it is NULL'ed when the frame is transmitted to prevent it being used twice. This fixes a bug where the P2P state machine in the supplicant gets stuck because it never gets a correct result for its transmitted frame. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/cfg.c | 2 ++ net/mac80211/ieee80211_i.h | 2 +- net/mac80211/status.c | 7 ++++++- 3 files changed, 9 insertions(+), 2 deletions(-) diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 4bc8a9250cf..9cd73b11506 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1822,6 +1822,7 @@ static int ieee80211_mgmt_tx(struct wiphy *wiphy, struct net_device *dev, *cookie ^= 2; IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_TX_OFFCHAN; local->hw_roc_skb = skb; + local->hw_roc_skb_for_status = skb; mutex_unlock(&local->mtx); return 0; @@ -1875,6 +1876,7 @@ static int ieee80211_mgmt_tx_cancel_wait(struct wiphy *wiphy, if (ret == 0) { kfree_skb(local->hw_roc_skb); local->hw_roc_skb = NULL; + local->hw_roc_skb_for_status = NULL; } mutex_unlock(&local->mtx); diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index c47d7c0e48a..533fd32f49f 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -953,7 +953,7 @@ struct ieee80211_local { struct ieee80211_channel *hw_roc_channel; struct net_device *hw_roc_dev; - struct sk_buff *hw_roc_skb; + struct sk_buff *hw_roc_skb, *hw_roc_skb_for_status; struct work_struct hw_roc_start, hw_roc_done; enum nl80211_channel_type hw_roc_channel_type; unsigned int hw_roc_duration; diff --git a/net/mac80211/status.c b/net/mac80211/status.c index 38a797217a9..071ac95c4aa 100644 --- a/net/mac80211/status.c +++ b/net/mac80211/status.c @@ -323,6 +323,7 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb) if (info->flags & IEEE80211_TX_INTFL_NL80211_FRAME_TX) { struct ieee80211_work *wk; + u64 cookie = (unsigned long)skb; rcu_read_lock(); list_for_each_entry_rcu(wk, &local->work_list, list) { @@ -334,8 +335,12 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb) break; } rcu_read_unlock(); + if (local->hw_roc_skb_for_status == skb) { + cookie = local->hw_roc_cookie ^ 2; + local->hw_roc_skb_for_status = NULL; + } cfg80211_mgmt_tx_status( - skb->dev, (unsigned long) skb, skb->data, skb->len, + skb->dev, cookie, skb->data, skb->len, !!(info->flags & IEEE80211_TX_STAT_ACK), GFP_ATOMIC); } -- cgit v1.2.3-18-g5258 From 6d152e23ad1a7a5b40fef1f42e017d66e6115159 Mon Sep 17 00:00:00 2001 From: Andy Gospodarek Date: Wed, 2 Feb 2011 14:53:25 -0800 Subject: gro: reset skb_iif on reuse Like Herbert's change from a few days ago: 66c46d741e2e60f0e8b625b80edb0ab820c46d7a gro: Reset dev pointer on reuse this may not be necessary at this point, but we should still clean up the skb->skb_iif. If not we may end up with an invalid valid for skb->skb_iif when the skb is reused and the check is done in __netif_receive_skb. Signed-off-by: Andy Gospodarek Signed-off-by: David S. Miller --- net/core/dev.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/core/dev.c b/net/core/dev.c index 4c907895876..b6d0bf875a8 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -3426,6 +3426,7 @@ static void napi_reuse_skb(struct napi_struct *napi, struct sk_buff *skb) skb_reserve(skb, NET_IP_ALIGN - skb_headroom(skb)); skb->vlan_tci = 0; skb->dev = napi->dev; + skb->skb_iif = 0; napi->skb = skb; } -- cgit v1.2.3-18-g5258 From 221c17fe87033aa154df68679b437c83d835c284 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Wed, 2 Feb 2011 06:04:31 +0000 Subject: qeth: show new mac-address if its setting fails Setting of a MAC-address may fail because an already used MAC-address is to bet set or because of authorization problems. In those cases qeth issues a message, but the mentioned MAC-address is not the new MAC-address to be set, but the actual MAC-address. This patch chooses now the new MAC-address to be set for the error messages. Signed-off-by: Ursula Braun Signed-off-by: Frank Blaschka Signed-off-by: David S. Miller --- drivers/s390/net/qeth_l2_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 2ac8f6aff5a..ada0fe78237 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -573,13 +573,13 @@ static int qeth_l2_send_setmac_cb(struct qeth_card *card, case IPA_RC_L2_DUP_LAYER3_MAC: dev_warn(&card->gdev->dev, "MAC address %pM already exists\n", - card->dev->dev_addr); + cmd->data.setdelmac.mac); break; case IPA_RC_L2_MAC_NOT_AUTH_BY_HYP: case IPA_RC_L2_MAC_NOT_AUTH_BY_ADP: dev_warn(&card->gdev->dev, "MAC address %pM is not authorized\n", - card->dev->dev_addr); + cmd->data.setdelmac.mac); break; default: break; -- cgit v1.2.3-18-g5258 From 9853b97bccbd2b08ce5fef497f21fa7395f68823 Mon Sep 17 00:00:00 2001 From: Frank Blaschka Date: Wed, 2 Feb 2011 06:04:32 +0000 Subject: qeth: add more strict MTU checking HiperSockets and OSA hardware report a maximum MTU size. Add checking to reject larger MTUs than allowed by hardware. Signed-off-by: Frank Blaschka Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core_main.c | 35 ++++------------------------------- 1 file changed, 4 insertions(+), 31 deletions(-) diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 29f848bfc12..ddeef41049a 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -1832,33 +1832,6 @@ static inline int qeth_get_initial_mtu_for_card(struct qeth_card *card) } } -static inline int qeth_get_max_mtu_for_card(int cardtype) -{ - switch (cardtype) { - - case QETH_CARD_TYPE_UNKNOWN: - case QETH_CARD_TYPE_OSD: - case QETH_CARD_TYPE_OSN: - case QETH_CARD_TYPE_OSM: - case QETH_CARD_TYPE_OSX: - return 61440; - case QETH_CARD_TYPE_IQD: - return 57344; - default: - return 1500; - } -} - -static inline int qeth_get_mtu_out_of_mpc(int cardtype) -{ - switch (cardtype) { - case QETH_CARD_TYPE_IQD: - return 1; - default: - return 0; - } -} - static inline int qeth_get_mtu_outof_framesize(int framesize) { switch (framesize) { @@ -1881,10 +1854,9 @@ static inline int qeth_mtu_is_valid(struct qeth_card *card, int mtu) case QETH_CARD_TYPE_OSD: case QETH_CARD_TYPE_OSM: case QETH_CARD_TYPE_OSX: - return ((mtu >= 576) && (mtu <= 61440)); case QETH_CARD_TYPE_IQD: return ((mtu >= 576) && - (mtu <= card->info.max_mtu + 4096 - 32)); + (mtu <= card->info.max_mtu)); case QETH_CARD_TYPE_OSN: case QETH_CARD_TYPE_UNKNOWN: default: @@ -1907,7 +1879,7 @@ static int qeth_ulp_enable_cb(struct qeth_card *card, struct qeth_reply *reply, memcpy(&card->token.ulp_filter_r, QETH_ULP_ENABLE_RESP_FILTER_TOKEN(iob->data), QETH_MPC_TOKEN_LENGTH); - if (qeth_get_mtu_out_of_mpc(card->info.type)) { + if (card->info.type == QETH_CARD_TYPE_IQD) { memcpy(&framesize, QETH_ULP_ENABLE_RESP_MAX_MTU(iob->data), 2); mtu = qeth_get_mtu_outof_framesize(framesize); if (!mtu) { @@ -1920,7 +1892,8 @@ static int qeth_ulp_enable_cb(struct qeth_card *card, struct qeth_reply *reply, card->qdio.in_buf_size = mtu + 2 * PAGE_SIZE; } else { card->info.initial_mtu = qeth_get_initial_mtu_for_card(card); - card->info.max_mtu = qeth_get_max_mtu_for_card(card->info.type); + card->info.max_mtu = *(__u16 *)QETH_ULP_ENABLE_RESP_MAX_MTU( + iob->data); card->qdio.in_buf_size = QETH_IN_BUF_SIZE_DEFAULT; } -- cgit v1.2.3-18-g5258 From 8b2e18f662939fb3d9b0ffe5da953ba56d259e3a Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Wed, 2 Feb 2011 06:04:33 +0000 Subject: qeth: allow HiperSockets framesize change in suspend For HiperSockets the framesize-definition determines the selected mtu-size and the size of the allocated qdio buffers. A framesize-change may occur while a Linux system with probed HiperSockets device is in suspend state. This patch enables proper resuming of a HiperSockets device in this case. Signed-off-by: Ursula Braun Signed-off-by: Frank Blaschka Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core_main.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index ddeef41049a..eca3e094031 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -1887,8 +1887,16 @@ static int qeth_ulp_enable_cb(struct qeth_card *card, struct qeth_reply *reply, QETH_DBF_TEXT_(SETUP, 2, " rc%d", iob->rc); return 0; } - card->info.max_mtu = mtu; + if (card->info.initial_mtu && (card->info.initial_mtu != mtu)) { + /* frame size has changed */ + if (card->dev && + ((card->dev->mtu == card->info.initial_mtu) || + (card->dev->mtu > mtu))) + card->dev->mtu = mtu; + qeth_free_qdio_buffers(card); + } card->info.initial_mtu = mtu; + card->info.max_mtu = mtu; card->qdio.in_buf_size = mtu + 2 * PAGE_SIZE; } else { card->info.initial_mtu = qeth_get_initial_mtu_for_card(card); -- cgit v1.2.3-18-g5258 From d0ff1f52361d714863c49abb721a8714ea4e76d6 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Wed, 2 Feb 2011 06:04:34 +0000 Subject: qeth: allow OSA CHPARM change in suspend state For OSA the CHPARM-definition determines the number of available outbound queues. A CHPARM-change may occur while a Linux system with probed OSA device is in suspend state. This patch enables proper resuming of an OSA device in this case. Signed-off-by: Ursula braun Signed-off-by: Frank Blaschka Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core_main.c | 104 +++++++++++++++++++++++--------------- 1 file changed, 63 insertions(+), 41 deletions(-) diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index eca3e094031..019ae58ab91 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -988,16 +988,30 @@ static void qeth_get_channel_path_desc(struct qeth_card *card) chp_dsc = (struct channelPath_dsc *)ccw_device_get_chp_desc(ccwdev, 0); if (chp_dsc != NULL) { /* CHPP field bit 6 == 1 -> single queue */ - if ((chp_dsc->chpp & 0x02) == 0x02) + if ((chp_dsc->chpp & 0x02) == 0x02) { + if ((atomic_read(&card->qdio.state) != + QETH_QDIO_UNINITIALIZED) && + (card->qdio.no_out_queues == 4)) + /* change from 4 to 1 outbound queues */ + qeth_free_qdio_buffers(card); card->qdio.no_out_queues = 1; + if (card->qdio.default_out_queue != 0) + dev_info(&card->gdev->dev, + "Priority Queueing not supported\n"); + card->qdio.default_out_queue = 0; + } else { + if ((atomic_read(&card->qdio.state) != + QETH_QDIO_UNINITIALIZED) && + (card->qdio.no_out_queues == 1)) { + /* change from 1 to 4 outbound queues */ + qeth_free_qdio_buffers(card); + card->qdio.default_out_queue = 2; + } + card->qdio.no_out_queues = 4; + } card->info.func_level = 0x4100 + chp_dsc->desc; kfree(chp_dsc); } - if (card->qdio.no_out_queues == 1) { - card->qdio.default_out_queue = 0; - dev_info(&card->gdev->dev, - "Priority Queueing not supported\n"); - } QETH_DBF_TEXT_(SETUP, 2, "nr:%x", card->qdio.no_out_queues); QETH_DBF_TEXT_(SETUP, 2, "lvl:%02x", card->info.func_level); return; @@ -3756,6 +3770,47 @@ static inline int qeth_get_qdio_q_format(struct qeth_card *card) } } +static void qeth_determine_capabilities(struct qeth_card *card) +{ + int rc; + int length; + char *prcd; + struct ccw_device *ddev; + int ddev_offline = 0; + + QETH_DBF_TEXT(SETUP, 2, "detcapab"); + ddev = CARD_DDEV(card); + if (!ddev->online) { + ddev_offline = 1; + rc = ccw_device_set_online(ddev); + if (rc) { + QETH_DBF_TEXT_(SETUP, 2, "3err%d", rc); + goto out; + } + } + + rc = qeth_read_conf_data(card, (void **) &prcd, &length); + if (rc) { + QETH_DBF_MESSAGE(2, "%s qeth_read_conf_data returned %i\n", + dev_name(&card->gdev->dev), rc); + QETH_DBF_TEXT_(SETUP, 2, "5err%d", rc); + goto out_offline; + } + qeth_configure_unitaddr(card, prcd); + qeth_configure_blkt_default(card, prcd); + kfree(prcd); + + rc = qdio_get_ssqd_desc(ddev, &card->ssqd); + if (rc) + QETH_DBF_TEXT_(SETUP, 2, "6err%d", rc); + +out_offline: + if (ddev_offline == 1) + ccw_device_set_offline(ddev); +out: + return; +} + static int qeth_qdio_establish(struct qeth_card *card) { struct qdio_initialize init_data; @@ -3886,6 +3941,7 @@ int qeth_core_hardsetup_card(struct qeth_card *card) QETH_DBF_TEXT(SETUP, 2, "hrdsetup"); atomic_set(&card->force_alloc_skb, 0); + qeth_get_channel_path_desc(card); retry: if (retries) QETH_DBF_MESSAGE(2, "%s Retrying to do IDX activates.\n", @@ -3914,6 +3970,7 @@ retriable: else goto retry; } + qeth_determine_capabilities(card); qeth_init_tokens(card); qeth_init_func_level(card); rc = qeth_idx_activate_channel(&card->read, qeth_idx_read_cb); @@ -4183,41 +4240,6 @@ void qeth_core_free_discipline(struct qeth_card *card) card->discipline.ccwgdriver = NULL; } -static void qeth_determine_capabilities(struct qeth_card *card) -{ - int rc; - int length; - char *prcd; - - QETH_DBF_TEXT(SETUP, 2, "detcapab"); - rc = ccw_device_set_online(CARD_DDEV(card)); - if (rc) { - QETH_DBF_TEXT_(SETUP, 2, "3err%d", rc); - goto out; - } - - - rc = qeth_read_conf_data(card, (void **) &prcd, &length); - if (rc) { - QETH_DBF_MESSAGE(2, "%s qeth_read_conf_data returned %i\n", - dev_name(&card->gdev->dev), rc); - QETH_DBF_TEXT_(SETUP, 2, "5err%d", rc); - goto out_offline; - } - qeth_configure_unitaddr(card, prcd); - qeth_configure_blkt_default(card, prcd); - kfree(prcd); - - rc = qdio_get_ssqd_desc(CARD_DDEV(card), &card->ssqd); - if (rc) - QETH_DBF_TEXT_(SETUP, 2, "6err%d", rc); - -out_offline: - ccw_device_set_offline(CARD_DDEV(card)); -out: - return; -} - static int qeth_core_probe_device(struct ccwgroup_device *gdev) { struct qeth_card *card; -- cgit v1.2.3-18-g5258 From 5df979d6922d50cc12bfbe83721c143a5d0d31b7 Mon Sep 17 00:00:00 2001 From: Stefan Weil Date: Wed, 2 Feb 2011 06:04:35 +0000 Subject: s390: Fix wrong size in memcmp (netiucv) This error was reported by cppcheck: drivers/s390/net/netiucv.c:568: error: Using sizeof for array given as function argument returns the size of pointer. sizeof(ipuser) did not result in 16 (as many programmers would have expected) but sizeof(u8 *), so it is 4 or 8, too small here. Signed-off-by: Stefan Weil Signed-off-by: Frank Blaschka Signed-off-by: David S. Miller --- drivers/s390/net/netiucv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/s390/net/netiucv.c b/drivers/s390/net/netiucv.c index 65ebee0a326..b6a6356d09b 100644 --- a/drivers/s390/net/netiucv.c +++ b/drivers/s390/net/netiucv.c @@ -565,7 +565,7 @@ static int netiucv_callback_connreq(struct iucv_path *path, struct iucv_event ev; int rc; - if (memcmp(iucvMagic, ipuser, sizeof(ipuser))) + if (memcmp(iucvMagic, ipuser, 16)) /* ipuser must match iucvMagic. */ return -EINVAL; rc = -EINVAL; -- cgit v1.2.3-18-g5258 From 08b018327c2e8412fd76f821e9bb9de36ef48cb1 Mon Sep 17 00:00:00 2001 From: Stefan Weil Date: Wed, 2 Feb 2011 06:04:36 +0000 Subject: s390: Fix possibly wrong size in strncmp (smsgiucv) This error was reported by cppcheck: drivers/s390/net/smsgiucv.c:63: error: Using sizeof for array given as function argument returns the size of pointer. Although there is no runtime problem as long as sizeof(u8 *) == 8, this misleading code should get fixed. Signed-off-by: Stefan Weil Signed-off-by: Frank Blaschka Signed-off-by: David S. Miller --- drivers/s390/net/smsgiucv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/s390/net/smsgiucv.c b/drivers/s390/net/smsgiucv.c index 65e1cf10494..207b7d74244 100644 --- a/drivers/s390/net/smsgiucv.c +++ b/drivers/s390/net/smsgiucv.c @@ -60,7 +60,7 @@ static struct iucv_handler smsg_handler = { static int smsg_path_pending(struct iucv_path *path, u8 ipvmid[8], u8 ipuser[16]) { - if (strncmp(ipvmid, "*MSG ", sizeof(ipvmid)) != 0) + if (strncmp(ipvmid, "*MSG ", 8) != 0) return -EINVAL; /* Path pending from *MSG. */ return iucv_path_accept(path, &smsg_handler, "SMSGIUCV ", NULL); -- cgit v1.2.3-18-g5258 From 94dde7e451fa70749fa68df3d70e4b20debe96a6 Mon Sep 17 00:00:00 2001 From: Chuck Ebbert Date: Wed, 2 Feb 2011 15:02:08 -0800 Subject: atl1c: Add missing PCI device ID Commit 8f574b35f22fbb9b5e5f1d11ad6b55b6f35f4533 ("atl1c: Add AR8151 v2 support and change L0s/L1 routine") added support for a new adapter but failed to add it to the PCI device table. Signed-Off-By: Chuck Ebbert Signed-off-by: David S. Miller --- drivers/net/atl1c/atl1c_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/atl1c/atl1c_main.c index a699bbf20eb..3824382faec 100644 --- a/drivers/net/atl1c/atl1c_main.c +++ b/drivers/net/atl1c/atl1c_main.c @@ -48,6 +48,7 @@ static DEFINE_PCI_DEVICE_TABLE(atl1c_pci_tbl) = { {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATHEROS_L2C_B)}, {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATHEROS_L2C_B2)}, {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATHEROS_L1D)}, + {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATHEROS_L1D_2_0)}, /* required last entry */ { 0 } }; -- cgit v1.2.3-18-g5258 From 7c161d0b900ea9bd9fc5ea5d3fa9916e9eb0dd88 Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Wed, 2 Feb 2011 13:42:58 -0800 Subject: staging: hv: Enable sending GARP packet after live migration The hv_netvsc gets RNDIS_STATUS_MEDIA_CONNECT event after the VM is live migrated. Adding call to netif_notify_peers() for this event to send GARP (Gratuitous ARP) to notify network peers. Otherwise, the VM's network connection may stop after a live migration. This patch should also be applied to stable kernel 2.6.32 and later. Signed-off-by: Haiyang Zhang Signed-off-by: Hank Janssen Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/hv/netvsc_drv.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/hv/netvsc_drv.c b/drivers/staging/hv/netvsc_drv.c index 54706a16dc0..b41c9640b72 100644 --- a/drivers/staging/hv/netvsc_drv.c +++ b/drivers/staging/hv/netvsc_drv.c @@ -236,6 +236,7 @@ static void netvsc_linkstatus_callback(struct hv_device *device_obj, if (status == 1) { netif_carrier_on(net); netif_wake_queue(net); + netif_notify_peers(net); } else { netif_carrier_off(net); netif_stop_queue(net); -- cgit v1.2.3-18-g5258 From 454f1419f14a459b31af83e512adcc714fa0e5e5 Mon Sep 17 00:00:00 2001 From: Harsha Priya Date: Tue, 25 Jan 2011 14:29:20 +0000 Subject: staging: sst: Fix for dmic capture on v2 pmic currently capture through dmic captures only silence This patch configurs the dmic registers to capture properly Signed-off-by: Harsha Priya Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/staging/intel_sst/intelmid_v2_control.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/staging/intel_sst/intelmid_v2_control.c b/drivers/staging/intel_sst/intelmid_v2_control.c index e38e89df6e8..e2f6d6a3c85 100644 --- a/drivers/staging/intel_sst/intelmid_v2_control.c +++ b/drivers/staging/intel_sst/intelmid_v2_control.c @@ -874,7 +874,10 @@ static int nc_set_selected_input_dev(u8 value) sc_access[3].reg_addr = 0x109; sc_access[3].mask = MASK6; sc_access[3].value = 0x00; - num_val = 4; + sc_access[4].reg_addr = 0x104; + sc_access[4].value = 0x3C; + sc_access[4].mask = 0xff; + num_val = 5; break; default: return -EINVAL; -- cgit v1.2.3-18-g5258 From 6a3be6e6e7feb4cb35275475d6a863b748d59cc3 Mon Sep 17 00:00:00 2001 From: Roland Vossen Date: Tue, 25 Jan 2011 11:51:56 +0100 Subject: staging: brcm80211: bugfix for softmac crash on multi cpu configurations Solved a locking issue that resulted in driver crashes with the 43224 and 43225 chips. The problem has been reported on several fora. Root cause was two fold: hardware was being manipulated by two unsynchronized threads, and a scan operation could interfere with an ongoing dynamic calibration process. Fix was to invoke a lock on wl_ops_config() operation and to set internal flags when a scan operation is started and stopped. Please add this to the staging-linus branch. Reviewed-by: Arend van Spriel Signed-off-by: Roland Vossen Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/brcm80211/sys/wl_mac80211.c | 12 ++++++++++-- drivers/staging/brcm80211/sys/wlc_mac80211.c | 13 +++++++++++++ drivers/staging/brcm80211/sys/wlc_pub.h | 2 ++ 3 files changed, 25 insertions(+), 2 deletions(-) diff --git a/drivers/staging/brcm80211/sys/wl_mac80211.c b/drivers/staging/brcm80211/sys/wl_mac80211.c index f1235884cc5..cd8392badff 100644 --- a/drivers/staging/brcm80211/sys/wl_mac80211.c +++ b/drivers/staging/brcm80211/sys/wl_mac80211.c @@ -263,9 +263,7 @@ ieee_set_channel(struct ieee80211_hw *hw, struct ieee80211_channel *chan, switch (type) { case NL80211_CHAN_HT20: case NL80211_CHAN_NO_HT: - WL_LOCK(wl); err = wlc_set(wl->wlc, WLC_SET_CHANNEL, chan->hw_value); - WL_UNLOCK(wl); break; case NL80211_CHAN_HT40MINUS: case NL80211_CHAN_HT40PLUS: @@ -285,6 +283,7 @@ static int wl_ops_config(struct ieee80211_hw *hw, u32 changed) int err = 0; int new_int; + WL_LOCK(wl); if (changed & IEEE80211_CONF_CHANGE_LISTEN_INTERVAL) { WL_NONE("%s: Setting listen interval to %d\n", __func__, conf->listen_interval); @@ -341,6 +340,7 @@ static int wl_ops_config(struct ieee80211_hw *hw, u32 changed) } config_out: + WL_UNLOCK(wl); return err; } @@ -459,13 +459,21 @@ wl_ops_set_tim(struct ieee80211_hw *hw, struct ieee80211_sta *sta, bool set) static void wl_ops_sw_scan_start(struct ieee80211_hw *hw) { + struct wl_info *wl = hw->priv; WL_NONE("Scan Start\n"); + WL_LOCK(wl); + wlc_scan_start(wl->wlc); + WL_UNLOCK(wl); return; } static void wl_ops_sw_scan_complete(struct ieee80211_hw *hw) { + struct wl_info *wl = hw->priv; WL_NONE("Scan Complete\n"); + WL_LOCK(wl); + wlc_scan_stop(wl->wlc); + WL_UNLOCK(wl); return; } diff --git a/drivers/staging/brcm80211/sys/wlc_mac80211.c b/drivers/staging/brcm80211/sys/wlc_mac80211.c index a1303863686..e37e8058e2b 100644 --- a/drivers/staging/brcm80211/sys/wlc_mac80211.c +++ b/drivers/staging/brcm80211/sys/wlc_mac80211.c @@ -8461,3 +8461,16 @@ static void wlc_txq_free(struct wlc_info *wlc, struct osl_info *osh, kfree(qi); } + +/* + * Flag 'scan in progress' to withold dynamic phy calibration + */ +void wlc_scan_start(struct wlc_info *wlc) +{ + wlc_phy_hold_upd(wlc->band->pi, PHY_HOLD_FOR_SCAN, true); +} + +void wlc_scan_stop(struct wlc_info *wlc) +{ + wlc_phy_hold_upd(wlc->band->pi, PHY_HOLD_FOR_SCAN, false); +} diff --git a/drivers/staging/brcm80211/sys/wlc_pub.h b/drivers/staging/brcm80211/sys/wlc_pub.h index 146a6904a39..aff413001b7 100644 --- a/drivers/staging/brcm80211/sys/wlc_pub.h +++ b/drivers/staging/brcm80211/sys/wlc_pub.h @@ -570,6 +570,8 @@ extern void wlc_enable_mac(struct wlc_info *wlc); extern u16 wlc_rate_shm_offset(struct wlc_info *wlc, u8 rate); extern u32 wlc_get_rspec_history(struct wlc_bsscfg *cfg); extern u32 wlc_get_current_highest_rate(struct wlc_bsscfg *cfg); +extern void wlc_scan_start(struct wlc_info *wlc); +extern void wlc_scan_stop(struct wlc_info *wlc); static inline int wlc_iovar_getuint(struct wlc_info *wlc, const char *name, uint *arg) -- cgit v1.2.3-18-g5258 From 34a6ef381d402c6547aa9abb8a74b0262ae8255f Mon Sep 17 00:00:00 2001 From: Peter Chubb Date: Wed, 2 Feb 2011 15:39:58 -0800 Subject: tcp_ecn is an integer not a boolean There was some confusion at LCA as to why the sysctl tcp_ecn took one of three values when it was documented as a Boolean. This patch fixes the documentation. Signed-off-by: Peter Chubb Signed-off-by: David S. Miller --- Documentation/networking/ip-sysctl.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index d99940dcfc4..ac3b4a726a1 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -187,7 +187,7 @@ tcp_cookie_size - INTEGER tcp_dsack - BOOLEAN Allows TCP to send "duplicate" SACKs. -tcp_ecn - BOOLEAN +tcp_ecn - INTEGER Enable Explicit Congestion Notification (ECN) in TCP. ECN is only used when both ends of the TCP flow support it. It is useful to avoid losses due to congestion (when the bottleneck router supports -- cgit v1.2.3-18-g5258 From f12d3d04e8f6223276abb068c5d72852174b8c31 Mon Sep 17 00:00:00 2001 From: Matthieu CASTET Date: Thu, 20 Jan 2011 21:11:45 +0100 Subject: x86, nx: Don't force pages RW when setting NX bits Xen want page table pages read only. But the initial page table (from head_*.S) live in .data or .bss. That was broken by 64edc8ed5ffae999d8d413ba006850e9e34166cb. There is absolutely no reason to force these pages RW after they have already been marked RO. Signed-off-by: Matthieu CASTET Tested-by: Konrad Rzeszutek Wilk Signed-off-by: H. Peter Anvin --- arch/x86/mm/pageattr.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 8b830ca14ac..d343b3c81f3 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -256,7 +256,6 @@ static inline pgprot_t static_protections(pgprot_t prot, unsigned long address, unsigned long pfn) { pgprot_t forbidden = __pgprot(0); - pgprot_t required = __pgprot(0); /* * The BIOS area between 640k and 1Mb needs to be executable for @@ -282,12 +281,6 @@ static inline pgprot_t static_protections(pgprot_t prot, unsigned long address, if (within(pfn, __pa((unsigned long)__start_rodata) >> PAGE_SHIFT, __pa((unsigned long)__end_rodata) >> PAGE_SHIFT)) pgprot_val(forbidden) |= _PAGE_RW; - /* - * .data and .bss should always be writable. - */ - if (within(address, (unsigned long)_sdata, (unsigned long)_edata) || - within(address, (unsigned long)__bss_start, (unsigned long)__bss_stop)) - pgprot_val(required) |= _PAGE_RW; #if defined(CONFIG_X86_64) && defined(CONFIG_DEBUG_RODATA) /* @@ -327,7 +320,6 @@ static inline pgprot_t static_protections(pgprot_t prot, unsigned long address, #endif prot = __pgprot(pgprot_val(prot) & ~pgprot_val(forbidden)); - prot = __pgprot(pgprot_val(prot) | pgprot_val(required)); return prot; } -- cgit v1.2.3-18-g5258 From fceda1bf498677501befc7da72fd2e4de7f18466 Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Tue, 1 Feb 2011 15:52:30 -0800 Subject: memsw: handle swapaccount kernel parameter correctly __setup based kernel command line parameters handlers which are handled in obsolete_checksetup are provided with the parameter value including = (more precisely everything right after the parameter name). This means that the current implementation of swapaccount[=1|0] doesn't work at all because if there is a value for the parameter then we are testing for "0" resp. "1" but we are getting "=0" resp. "=1" and if there is no parameter value we are getting an empty string rather than NULL. The original noswapccount parameter, which doesn't care about the value, works correctly. Signed-off-by: Michal Hocko Acked-by: KAMEZAWA Hiroyuki Cc: Daisuke Nishimura Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 3878cfe399d..44f9f9c89f0 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -5024,9 +5024,9 @@ struct cgroup_subsys mem_cgroup_subsys = { static int __init enable_swap_account(char *s) { /* consider enabled if no parameter or 1 is given */ - if (!s || !strcmp(s, "1")) + if (!(*s) || !strcmp(s, "=1")) really_do_swap_account = 1; - else if (!strcmp(s, "0")) + else if (!strcmp(s, "=0")) really_do_swap_account = 0; return 1; } @@ -5034,7 +5034,7 @@ __setup("swapaccount", enable_swap_account); static int __init disable_swap_account(char *s) { - enable_swap_account("0"); + enable_swap_account("=0"); return 1; } __setup("noswapaccount", disable_swap_account); -- cgit v1.2.3-18-g5258 From 552b372ba9db85751e7db2998f07cca2e51f5865 Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Tue, 1 Feb 2011 15:52:31 -0800 Subject: memsw: deprecate noswapaccount kernel parameter and schedule it for removal noswapaccount couldn't be used to control memsw for both on/off cases so we have added swapaccount[=0|1] parameter. This way we can turn the feature in two ways noswapaccount resp. swapaccount=0. We have kept the original noswapaccount but I think we should remove it after some time as it just makes more command line parameters without any advantages and also the code to handle parameters is uglier if we want both parameters. Signed-off-by: Michal Hocko Requested-by: KAMEZAWA Hiroyuki Acked-by: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/feature-removal-schedule.txt | 16 ++++++++++++++++ mm/memcontrol.c | 1 + 2 files changed, 17 insertions(+) diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index b959659c5df..b3f35e5f9c9 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -603,3 +603,19 @@ Why: The adm9240, w83792d and w83793 hardware monitoring drivers have Who: Jean Delvare ---------------------------- + +What: noswapaccount kernel command line parameter +When: 2.6.40 +Why: The original implementation of memsw feature enabled by + CONFIG_CGROUP_MEM_RES_CTLR_SWAP could be disabled by the noswapaccount + kernel parameter (introduced in 2.6.29-rc1). Later on, this decision + turned out to be not ideal because we cannot have the feature compiled + in and disabled by default and let only interested to enable it + (e.g. general distribution kernels might need it). Therefore we have + added swapaccount[=0|1] parameter (introduced in 2.6.37) which provides + the both possibilities. If we remove noswapaccount we will have + less command line parameters with the same functionality and we + can also cleanup the parameter handling a bit (). +Who: Michal Hocko + +---------------------------- diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 44f9f9c89f0..79abb1fd39d 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -5034,6 +5034,7 @@ __setup("swapaccount", enable_swap_account); static int __init disable_swap_account(char *s) { + printk_once("noswapaccount is deprecated and will be removed in 2.6.40. Use swapaccount=0 instead\n"); enable_swap_account("=0"); return 1; } -- cgit v1.2.3-18-g5258 From 57fc4a5ee322cde96c33f101d3c2d3b79011c05c Mon Sep 17 00:00:00 2001 From: Andrea Arcangeli Date: Tue, 1 Feb 2011 15:52:32 -0800 Subject: mm: when migrate_pages returns 0, all pages must have been released In some cases migrate_pages could return zero while still leaving a few pages in the pagelist (and some caller wouldn't notice it has to call putback_lru_pages after commit cf608ac19c9 ("mm: compaction: fix COMPACTPAGEFAILED counting")). Add one missing putback_lru_pages not added by commit cf608ac19c95 ("mm: compaction: fix COMPACTPAGEFAILED counting"). Signed-off-by: Andrea Arcangeli Signed-off-by: Minchan Kim Reviewed-by: Minchan Kim Cc: Christoph Lameter Acked-by: Mel Gorman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory-failure.c | 1 + mm/migrate.c | 3 +-- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/mm/memory-failure.c b/mm/memory-failure.c index 548fbd70f02..75398b0bfed 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -1419,6 +1419,7 @@ int soft_offline_page(struct page *page, int flags) ret = migrate_pages(&pagelist, new_page, MPOL_MF_MOVE_ALL, 0, true); if (ret) { + putback_lru_pages(&pagelist); pr_info("soft offline: %#lx: migration failed %d, type %lx\n", pfn, ret, page->flags); if (ret > 0) diff --git a/mm/migrate.c b/mm/migrate.c index 9f29a3b7aac..155a2e9a805 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -772,6 +772,7 @@ uncharge: unlock: unlock_page(page); +move_newpage: if (rc != -EAGAIN) { /* * A page that has been migrated has all references @@ -785,8 +786,6 @@ unlock: putback_lru_page(page); } -move_newpage: - /* * Move the new page to the LRU. If migration was not successful * then this will free the page. -- cgit v1.2.3-18-g5258 From 48db54ee2f41e8ae2faf330b55db34a9fffb5b3c Mon Sep 17 00:00:00 2001 From: Minchan Kim Date: Tue, 1 Feb 2011 15:52:33 -0800 Subject: mm/migration: fix page corruption during hugepage migration If migrate_huge_page by memory-failure fails , it calls put_page in itself to decrease page reference and caller of migrate_huge_page also calls putback_lru_pages. It can do double free of page so it can make page corruption on page holder. In addtion, clean of pages on caller is consistent behavior with migrate_pages by cf608ac19c ("mm: compaction: fix COMPACTPAGEFAILED counting"). Signed-off-by: Minchan Kim Cc: Andrea Arcangeli Cc: Christoph Lameter Cc: Mel Gorman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory-failure.c | 5 ++++- mm/migrate.c | 4 ---- 2 files changed, 4 insertions(+), 5 deletions(-) diff --git a/mm/memory-failure.c b/mm/memory-failure.c index 75398b0bfed..237aaa488f4 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -1295,7 +1295,10 @@ static int soft_offline_huge_page(struct page *page, int flags) ret = migrate_huge_pages(&pagelist, new_page, MPOL_MF_MOVE_ALL, 0, true); if (ret) { - putback_lru_pages(&pagelist); + struct page *page1, *page2; + list_for_each_entry_safe(page1, page2, &pagelist, lru) + put_page(page1); + pr_debug("soft offline: %#lx: migration failed %d, type %lx\n", pfn, ret, page->flags); if (ret > 0) diff --git a/mm/migrate.c b/mm/migrate.c index 155a2e9a805..76611525380 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -980,10 +980,6 @@ int migrate_huge_pages(struct list_head *from, } rc = 0; out: - - list_for_each_entry_safe(page, page2, from, lru) - put_page(page); - if (rc) return rc; -- cgit v1.2.3-18-g5258 From 0781b909b5586f4db720b5d1838b78f9d8e42f14 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 1 Feb 2011 15:52:35 -0800 Subject: epoll: epoll_wait() should not use timespec_add_ns() commit 95aac7b1cd224f ("epoll: make epoll_wait() use the hrtimer range feature") added a performance regression because it uses timespec_add_ns() with potential very large 'ns' values. [akpm@linux-foundation.org: s/epoll_set_mstimeout/ep_set_mstimeout/, per Davide] Reported-by: Simon Kirby Signed-off-by: Eric Dumazet Cc: Shawn Bohrer Acked-by: Davide Libenzi Cc: [2.6.37.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/eventpoll.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/fs/eventpoll.c b/fs/eventpoll.c index cc8a9b7d606..267d0ada454 100644 --- a/fs/eventpoll.c +++ b/fs/eventpoll.c @@ -1114,6 +1114,17 @@ static int ep_send_events(struct eventpoll *ep, return ep_scan_ready_list(ep, ep_send_events_proc, &esed); } +static inline struct timespec ep_set_mstimeout(long ms) +{ + struct timespec now, ts = { + .tv_sec = ms / MSEC_PER_SEC, + .tv_nsec = NSEC_PER_MSEC * (ms % MSEC_PER_SEC), + }; + + ktime_get_ts(&now); + return timespec_add_safe(now, ts); +} + static int ep_poll(struct eventpoll *ep, struct epoll_event __user *events, int maxevents, long timeout) { @@ -1121,12 +1132,11 @@ static int ep_poll(struct eventpoll *ep, struct epoll_event __user *events, unsigned long flags; long slack; wait_queue_t wait; - struct timespec end_time; ktime_t expires, *to = NULL; if (timeout > 0) { - ktime_get_ts(&end_time); - timespec_add_ns(&end_time, (u64)timeout * NSEC_PER_MSEC); + struct timespec end_time = ep_set_mstimeout(timeout); + slack = select_estimate_accuracy(&end_time); to = &expires; *to = timespec_to_ktime(end_time); -- cgit v1.2.3-18-g5258 From eb2ffcaf14d00da8ccc15af2a44165f5ba67ccc8 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 1 Feb 2011 15:52:36 -0800 Subject: MAINTAINERS: move s3c2410 drivers to ARM/SAMSUNG ARM There are currently two entries under the "SIMTEC EB2410ITX (BAST)" machine entry for drivers/*/*s3c2410*, which is catching everything s3c2410 driver related. This entry is for a specific S3C2410 based machine, so move these two file entries to the "ARM/SAMSUNG ARM ARCHITECTURES" entry, where it will reach a wider audience of interested parties. Signed-off-by: Ben Dooks Cc: Simtec Linux Team Acked-by: Kukjin Kim Cc: Jack Stone Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 445537d46e7..12267e1eb54 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -978,6 +978,8 @@ S: Maintained F: arch/arm/plat-samsung/ F: arch/arm/plat-s3c24xx/ F: arch/arm/plat-s5p/ +F: drivers/*/*s3c2410* +F: drivers/*/*/*s3c2410* ARM/S3C2410 ARM ARCHITECTURE M: Ben Dooks @@ -5624,8 +5626,6 @@ M: Vincent Sanders W: http://www.simtec.co.uk/products/EB2410ITX/ S: Supported F: arch/arm/mach-s3c2410/ -F: drivers/*/*s3c2410* -F: drivers/*/*/*s3c2410* TI DAVINCI MACHINE SUPPORT M: Kevin Hilman -- cgit v1.2.3-18-g5258 From 583220389b253692fda4c80ac4d560714998f0e7 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 1 Feb 2011 15:52:37 -0800 Subject: MAINTAINERS: fixup file entries for "SIMTEC EB2410ITX (BAST)" Add the correct files for the Simtec BAST machine, ensuring the IDE and IRQ routing are added, and move to the machine specific file instead of trying to catch all of arch/arm/mach-s3c2410 Signed-off-by: Ben Dooks Cc: Simtec Linux Team Cc: Simtec Support Cc: Jack Stone Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 12267e1eb54..2419407e205 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5625,7 +5625,9 @@ P: Ben Dooks M: Vincent Sanders W: http://www.simtec.co.uk/products/EB2410ITX/ S: Supported -F: arch/arm/mach-s3c2410/ +F: arch/arm/mach-s3c2410/mach-bast.c +F: arch/arm/mach-s3c2410/bast-ide.c +F: arch/arm/mach-s3c2410/bast-irq.c TI DAVINCI MACHINE SUPPORT M: Kevin Hilman -- cgit v1.2.3-18-g5258 From b16957c643de958ef731c03e0b24c5537490f196 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 1 Feb 2011 15:52:38 -0800 Subject: MAINTAINERS: fixup Simtec support email entries The support@simtec.co.uk address is for direct customer support only, the EB2410ITX and EB110ATX entries should direct to the Simtec Linux Team address of linux@simtec.co.uk Also add correct email address for Vincent Sanders [akpm@linux-foundation.org: fix Vincent's address] Signed-off-by: Ben Dooks Cc: Vincent Sanders Cc: Simtec Support Cc: Simtec Linux Team Cc: Jack Stone Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 2419407e205..9511bff301c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5616,13 +5616,15 @@ F: include/linux/sfi*.h SIMTEC EB110ATX (Chalice CATS) P: Ben Dooks -M: Vincent Sanders +P: Vincent Sanders +M: Simtec Linux Team W: http://www.simtec.co.uk/products/EB110ATX/ S: Supported SIMTEC EB2410ITX (BAST) P: Ben Dooks -M: Vincent Sanders +P: Vincent Sanders +M: Simtec Linux Team W: http://www.simtec.co.uk/products/EB2410ITX/ S: Supported F: arch/arm/mach-s3c2410/mach-bast.c -- cgit v1.2.3-18-g5258 From efeda7a41e09efce506a68c3549b60b16dd7dedd Mon Sep 17 00:00:00 2001 From: Jin Dongming Date: Tue, 1 Feb 2011 15:52:39 -0800 Subject: thp: fix splitting of hwpoisoned hugepages The poisoned THP is now split with split_huge_page() in collect_procs_anon(). If kmalloc() is failed in collect_procs(), split_huge_page() could not be called. And the work after split_huge_page() for collecting the processes using poisoned page will not be done, too. So the processes using the poisoned page could not be killed. The condition becomes worse when CONFIG_DEBUG_VM == "Y". Because the poisoned THP could not be split, system panic will be caused by VM_BUG_ON(PageTransHuge(page)) in try_to_unmap(). This patch does: 1. move split_huge_page() to the place before collect_procs(). This can be sure the failure of splitting THP is caused by itself. 2. when splitting THP is failed, stop the operations after it. This can avoid unexpected system panic or non sense works. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Jin Dongming Reviewed-by: Hidetoshi Seto Cc: Andrea Arcangeli Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory-failure.c | 30 ++++++++++++++++++++++++++++-- 1 file changed, 28 insertions(+), 2 deletions(-) diff --git a/mm/memory-failure.c b/mm/memory-failure.c index 237aaa488f4..1e9c30b241c 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -386,8 +386,6 @@ static void collect_procs_anon(struct page *page, struct list_head *to_kill, struct task_struct *tsk; struct anon_vma *av; - if (!PageHuge(page) && unlikely(split_huge_page(page))) - return; read_lock(&tasklist_lock); av = page_lock_anon_vma(page); if (av == NULL) /* Not actually mapped anymore */ @@ -896,6 +894,34 @@ static int hwpoison_user_mappings(struct page *p, unsigned long pfn, } } + if (PageTransHuge(hpage)) { + /* + * Verify that this isn't a hugetlbfs head page, the check for + * PageAnon is just for avoid tripping a split_huge_page + * internal debug check, as split_huge_page refuses to deal with + * anything that isn't an anon page. PageAnon can't go away fro + * under us because we hold a refcount on the hpage, without a + * refcount on the hpage. split_huge_page can't be safely called + * in the first place, having a refcount on the tail isn't + * enough * to be safe. + */ + if (!PageHuge(hpage) && PageAnon(hpage)) { + if (unlikely(split_huge_page(hpage))) { + /* + * FIXME: if splitting THP is failed, it is + * better to stop the following operation rather + * than causing panic by unmapping. System might + * survive if the page is freed later. + */ + printk(KERN_INFO + "MCE %#lx: failed to split THP\n", pfn); + + BUG_ON(!PageHWPoison(p)); + return SWAP_FAIL; + } + } + } + /* * First collect all the processes that have the page * mapped in dirty form. This has to be done before try_to_unmap, -- cgit v1.2.3-18-g5258 From a6d30dddae4648837be5a0c0cb2c0ae9ad0377db Mon Sep 17 00:00:00 2001 From: Jin Dongming Date: Tue, 1 Feb 2011 15:52:40 -0800 Subject: thp: fix the wrong reported address of hwpoisoned hugepages When the tail page of THP is poisoned, the head page will be poisoned too. And the wrong address, address of head page, will be sent with sigbus always. So when the poisoned page is used by Guest OS which is running on KVM, after the address changing(hva->gpa) by qemu, the unexpected process on Guest OS will be killed by sigbus. What we expected is that the process using the poisoned tail page could be killed on Guest OS, but not that the process using the healthy head page is killed. Since it is not good to poison the healthy page, avoid poisoning other than the page which is really poisoned. (While we poison all pages in a huge page in case of hugetlb, we can do this for THP thanks to split_huge_page().) Here we fix two parts: 1. Isolate the poisoned page only to make sure the reported address is the address of poisoned page. 2. make the poisoned page work as the poisoned regular page. [akpm@linux-foundation.org: fix spello in comment] Signed-off-by: Jin Dongming Reviewed-by: Hidetoshi Seto Cc: Andrea Arcangeli Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/huge_memory.c | 7 ++++++- mm/memory-failure.c | 27 ++++++++++++++++++++++----- 2 files changed, 28 insertions(+), 6 deletions(-) diff --git a/mm/huge_memory.c b/mm/huge_memory.c index e187454d82f..b6c1ce3c53b 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -1162,7 +1162,12 @@ static void __split_huge_page_refcount(struct page *page) /* after clearing PageTail the gup refcount can be released */ smp_mb(); - page_tail->flags &= ~PAGE_FLAGS_CHECK_AT_PREP; + /* + * retain hwpoison flag of the poisoned tail page: + * fix for the unsuitable process killed on Guest Machine(KVM) + * by the memory-failure. + */ + page_tail->flags &= ~PAGE_FLAGS_CHECK_AT_PREP | __PG_HWPOISON; page_tail->flags |= (page->flags & ((1L << PG_referenced) | (1L << PG_swapbacked) | diff --git a/mm/memory-failure.c b/mm/memory-failure.c index 1e9c30b241c..04158d6f44d 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -854,6 +854,7 @@ static int hwpoison_user_mappings(struct page *p, unsigned long pfn, int ret; int kill = 1; struct page *hpage = compound_head(p); + struct page *ppage; if (PageReserved(p) || PageSlab(p)) return SWAP_SUCCESS; @@ -894,6 +895,14 @@ static int hwpoison_user_mappings(struct page *p, unsigned long pfn, } } + /* + * ppage: poisoned page + * if p is regular page(4k page) + * ppage == real poisoned page; + * else p is hugetlb or THP, ppage == head page. + */ + ppage = hpage; + if (PageTransHuge(hpage)) { /* * Verify that this isn't a hugetlbfs head page, the check for @@ -919,6 +928,8 @@ static int hwpoison_user_mappings(struct page *p, unsigned long pfn, BUG_ON(!PageHWPoison(p)); return SWAP_FAIL; } + /* THP is split, so ppage should be the real poisoned page. */ + ppage = p; } } @@ -931,12 +942,18 @@ static int hwpoison_user_mappings(struct page *p, unsigned long pfn, * there's nothing that can be done. */ if (kill) - collect_procs(hpage, &tokill); + collect_procs(ppage, &tokill); - ret = try_to_unmap(hpage, ttu); + if (hpage != ppage) + lock_page_nosync(ppage); + + ret = try_to_unmap(ppage, ttu); if (ret != SWAP_SUCCESS) printk(KERN_ERR "MCE %#lx: failed to unmap page (mapcount=%d)\n", - pfn, page_mapcount(hpage)); + pfn, page_mapcount(ppage)); + + if (hpage != ppage) + unlock_page(ppage); /* * Now that the dirty bit has been propagated to the @@ -947,7 +964,7 @@ static int hwpoison_user_mappings(struct page *p, unsigned long pfn, * use a more force-full uncatchable kill to prevent * any accesses to the poisoned memory. */ - kill_procs_ao(&tokill, !!PageDirty(hpage), trapno, + kill_procs_ao(&tokill, !!PageDirty(ppage), trapno, ret != SWAP_SUCCESS, p, pfn); return ret; @@ -1090,7 +1107,7 @@ int __memory_failure(unsigned long pfn, int trapno, int flags) * For error on the tail page, we should set PG_hwpoison * on the head page to show that the hugepage is hwpoisoned */ - if (PageTail(p) && TestSetPageHWPoison(hpage)) { + if (PageHuge(p) && PageTail(p) && TestSetPageHWPoison(hpage)) { action_result(pfn, "hugepage already hardware poisoned", IGNORED); unlock_page(hpage); -- cgit v1.2.3-18-g5258 From af241a083404acda7ba3690e5b7697949d729fcc Mon Sep 17 00:00:00 2001 From: Jin Dongming Date: Tue, 1 Feb 2011 15:52:41 -0800 Subject: thp: fix unsuitable behavior for hwpoisoned tail page When a tail page of THP is poisoned, memory-failure will do nothing except setting PG_hwpoison, while the expected behavior is that the process, who is using the poisoned tail page, should be killed. The above problem is caused by lru check of the poisoned tail page of THP. Because PG_lru flag is only set on the head page of THP, the check always consider the poisoned tail page as NON lru page. So the lru check for the tail page of THP should be avoided, as like as hugetlb. This patch adds !PageTransCompound() before lru check for THP, because of the check (!PageHuge() && !PageTransCompound()) the whole branch could be optimized away at build time when both hugetlbfs and THP are set with "N" (or in archs not supporting either of those). [akpm@linux-foundation.org: fix unrelated typo in shake_page() comment] Signed-off-by: Jin Dongming Reviewed-by: Hidetoshi Seto Cc: Andrea Arcangeli Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory-failure.c | 31 +++++++++++++++++-------------- 1 file changed, 17 insertions(+), 14 deletions(-) diff --git a/mm/memory-failure.c b/mm/memory-failure.c index 04158d6f44d..0207c2f6f8b 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -233,8 +233,8 @@ void shake_page(struct page *p, int access) } /* - * Only all shrink_slab here (which would also - * shrink other caches) if access is not potentially fatal. + * Only call shrink_slab here (which would also shrink other caches) if + * access is not potentially fatal. */ if (access) { int nr; @@ -1065,19 +1065,22 @@ int __memory_failure(unsigned long pfn, int trapno, int flags) * The check (unnecessarily) ignores LRU pages being isolated and * walked by the page reclaim code, however that's not a big loss. */ - if (!PageLRU(p) && !PageHuge(p)) - shake_page(p, 0); - if (!PageLRU(p) && !PageHuge(p)) { - /* - * shake_page could have turned it free. - */ - if (is_free_buddy_page(p)) { - action_result(pfn, "free buddy, 2nd try", DELAYED); - return 0; + if (!PageHuge(p) && !PageTransCompound(p)) { + if (!PageLRU(p)) + shake_page(p, 0); + if (!PageLRU(p)) { + /* + * shake_page could have turned it free. + */ + if (is_free_buddy_page(p)) { + action_result(pfn, "free buddy, 2nd try", + DELAYED); + return 0; + } + action_result(pfn, "non LRU", IGNORED); + put_page(p); + return -EBUSY; } - action_result(pfn, "non LRU", IGNORED); - put_page(p); - return -EBUSY; } /* -- cgit v1.2.3-18-g5258 From 9221edb7120e2dc3ae90f1c58514979f7ba40e46 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Tue, 1 Feb 2011 15:52:42 -0800 Subject: memcg: prevent endless loop when charging huge pages The charging code can encounter a charge size that is bigger than a regular page in two situations: one is a batched charge to fill the per-cpu stocks, the other is a huge page charge. This code is distributed over two functions, however, and only the outer one is aware of huge pages. In case the charging fails, the inner function will tell the outer function to retry if the charge size is bigger than regular pages--assuming batched charging is the only case. And the outer function will retry forever charging a huge page. This patch makes sure the inner function can distinguish between batch charging and a single huge page charge. It will only signal another attempt if batch charging failed, and go into regular reclaim when it is called on behalf of a huge page. Signed-off-by: Johannes Weiner Acked-by: KAMEZAWA Hiroyuki Reviewed-by: Minchan Kim Cc: Balbir Singh Cc: Daisuke Nishimura Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 79abb1fd39d..50eb50e100f 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -1837,8 +1837,15 @@ static int __mem_cgroup_do_charge(struct mem_cgroup *mem, gfp_t gfp_mask, flags |= MEM_CGROUP_RECLAIM_NOSWAP; } else mem_over_limit = mem_cgroup_from_res_counter(fail_res, res); - - if (csize > PAGE_SIZE) /* change csize and retry */ + /* + * csize can be either a huge page (HPAGE_SIZE), a batch of + * regular pages (CHARGE_SIZE), or a single regular page + * (PAGE_SIZE). + * + * Never reclaim on behalf of optional batching, retry with a + * single page instead. + */ + if (csize == CHARGE_SIZE) return CHARGE_RETRY; if (!(gfp_mask & __GFP_WAIT)) -- cgit v1.2.3-18-g5258 From 19942822df65ee4a47c2e6d6d70cace1b7f01710 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Tue, 1 Feb 2011 15:52:43 -0800 Subject: memcg: prevent endless loop when charging huge pages to near-limit group If reclaim after a failed charging was unsuccessful, the limits are checked again, just in case they settled by means of other tasks. This is all fine as long as every charge is of size PAGE_SIZE, because in that case, being below the limit means having at least PAGE_SIZE bytes available. But with transparent huge pages, we may end up in an endless loop where charging and reclaim fail, but we keep going because the limits are not yet exceeded, although not allowing for a huge page. Fix this up by explicitely checking for enough room, not just whether we are within limits. Signed-off-by: Johannes Weiner Acked-by: KAMEZAWA Hiroyuki Reviewed-by: Minchan Kim Cc: Balbir Singh Cc: Daisuke Nishimura Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/res_counter.h | 20 ++++++++++++++++++++ mm/memcontrol.c | 35 ++++++++++++++++++++++++++++------- 2 files changed, 48 insertions(+), 7 deletions(-) diff --git a/include/linux/res_counter.h b/include/linux/res_counter.h index fcb9884df61..a5930cb6614 100644 --- a/include/linux/res_counter.h +++ b/include/linux/res_counter.h @@ -182,6 +182,26 @@ static inline bool res_counter_check_under_limit(struct res_counter *cnt) return ret; } +/** + * res_counter_check_margin - check if the counter allows charging + * @cnt: the resource counter to check + * @bytes: the number of bytes to check the remaining space against + * + * Returns a boolean value on whether the counter can be charged + * @bytes or whether this would exceed the limit. + */ +static inline bool res_counter_check_margin(struct res_counter *cnt, + unsigned long bytes) +{ + bool ret; + unsigned long flags; + + spin_lock_irqsave(&cnt->lock, flags); + ret = cnt->limit - cnt->usage >= bytes; + spin_unlock_irqrestore(&cnt->lock, flags); + return ret; +} + static inline bool res_counter_check_under_soft_limit(struct res_counter *cnt) { bool ret; diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 50eb50e100f..0e81eb5f0ae 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -1111,6 +1111,23 @@ static bool mem_cgroup_check_under_limit(struct mem_cgroup *mem) return false; } +/** + * mem_cgroup_check_margin - check if the memory cgroup allows charging + * @mem: memory cgroup to check + * @bytes: the number of bytes the caller intends to charge + * + * Returns a boolean value on whether @mem can be charged @bytes or + * whether this would exceed the limit. + */ +static bool mem_cgroup_check_margin(struct mem_cgroup *mem, unsigned long bytes) +{ + if (!res_counter_check_margin(&mem->res, bytes)) + return false; + if (do_swap_account && !res_counter_check_margin(&mem->memsw, bytes)) + return false; + return true; +} + static unsigned int get_swappiness(struct mem_cgroup *memcg) { struct cgroup *cgrp = memcg->css.cgroup; @@ -1852,15 +1869,19 @@ static int __mem_cgroup_do_charge(struct mem_cgroup *mem, gfp_t gfp_mask, return CHARGE_WOULDBLOCK; ret = mem_cgroup_hierarchical_reclaim(mem_over_limit, NULL, - gfp_mask, flags); + gfp_mask, flags); + if (mem_cgroup_check_margin(mem_over_limit, csize)) + return CHARGE_RETRY; /* - * try_to_free_mem_cgroup_pages() might not give us a full - * picture of reclaim. Some pages are reclaimed and might be - * moved to swap cache or just unmapped from the cgroup. - * Check the limit again to see if the reclaim reduced the - * current usage of the cgroup before giving up + * Even though the limit is exceeded at this point, reclaim + * may have been able to free some pages. Retry the charge + * before killing the task. + * + * Only for regular pages, though: huge pages are rather + * unlikely to succeed so close to the limit, and we fall back + * to regular pages anyway in case of failure. */ - if (ret || mem_cgroup_check_under_limit(mem_over_limit)) + if (csize == PAGE_SIZE && ret) return CHARGE_RETRY; /* -- cgit v1.2.3-18-g5258 From 8493ae439f7038b502df1d687e61dde54c27ca92 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Tue, 1 Feb 2011 15:52:44 -0800 Subject: memcg: never OOM when charging huge pages Huge page coverage should obviously have less priority than the continued execution of a process. Never kill a process when charging it a huge page fails. Instead, give up after the first failed reclaim attempt and fall back to regular pages. Signed-off-by: Johannes Weiner Acked-by: KAMEZAWA Hiroyuki Reviewed-by: Minchan Kim Cc: Balbir Singh Cc: Daisuke Nishimura Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 0e81eb5f0ae..fc75f34ba60 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -2351,13 +2351,19 @@ static int mem_cgroup_charge_common(struct page *page, struct mm_struct *mm, gfp_t gfp_mask, enum charge_type ctype) { struct mem_cgroup *mem = NULL; + int page_size = PAGE_SIZE; struct page_cgroup *pc; + bool oom = true; int ret; - int page_size = PAGE_SIZE; if (PageTransHuge(page)) { page_size <<= compound_order(page); VM_BUG_ON(!PageTransHuge(page)); + /* + * Never OOM-kill a process for a huge page. The + * fault handler will fall back to regular pages. + */ + oom = false; } pc = lookup_page_cgroup(page); @@ -2366,7 +2372,7 @@ static int mem_cgroup_charge_common(struct page *page, struct mm_struct *mm, return 0; prefetchw(pc); - ret = __mem_cgroup_try_charge(mm, gfp_mask, &mem, true, page_size); + ret = __mem_cgroup_try_charge(mm, gfp_mask, &mem, oom, page_size); if (ret || !mem) return ret; -- cgit v1.2.3-18-g5258 From 3751d60430fe4c26460a5ca8ad8672d32f93bcb1 Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Tue, 1 Feb 2011 15:52:45 -0800 Subject: memcg: fix event counting breakage from recent THP update Changes in e401f1761 ("memcg: modify accounting function for supporting THP better") adds nr_pages to support multiple page size in memory_cgroup_charge_statistics. But counting the number of event nees abs(nr_pages) for increasing counters. This patch fixes event counting. Signed-off-by: KAMEZAWA Hiroyuki Reviewed-by: Johannes Weiner Cc: Daisuke Nishimura Cc: Balbir Singh Cc: Minchan Kim Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index fc75f34ba60..da53a252b25 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -612,8 +612,10 @@ static void mem_cgroup_charge_statistics(struct mem_cgroup *mem, /* pagein of a big page is an event. So, ignore page size */ if (nr_pages > 0) __this_cpu_inc(mem->stat->count[MEM_CGROUP_STAT_PGPGIN_COUNT]); - else + else { __this_cpu_inc(mem->stat->count[MEM_CGROUP_STAT_PGPGOUT_COUNT]); + nr_pages = -nr_pages; /* for event */ + } __this_cpu_add(mem->stat->count[MEM_CGROUP_EVENTS], nr_pages); -- cgit v1.2.3-18-g5258 From 1a44bc8c7cfe69756a116d38aef992d50fc1969d Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Tue, 1 Feb 2011 15:52:46 -0800 Subject: vfs: sparse: remove a warning on OPEN_FMODE() AND-ing FMODE_* constant with normal integer results in following sparse warnings. Fix it. fs/open.c:662:21: warning: restricted fmode_t degrades to integer fs/anon_inodes.c:123:34: warning: restricted fmode_t degrades to integer Signed-off-by: Namhyung Kim Cc: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/fs.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/include/linux/fs.h b/include/linux/fs.h index 32b38cd829d..675678a01f5 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2555,9 +2555,11 @@ int proc_nr_inodes(struct ctl_table *table, int write, void __user *buffer, size_t *lenp, loff_t *ppos); int __init get_filesystem_list(char *buf); +#define __FMODE_NONOTIFY ((__force int) FMODE_NONOTIFY) + #define ACC_MODE(x) ("\004\002\006\006"[(x)&O_ACCMODE]) #define OPEN_FMODE(flag) ((__force fmode_t)(((flag + 1) & O_ACCMODE) | \ - (flag & FMODE_NONOTIFY))) + (flag & __FMODE_NONOTIFY))) #endif /* __KERNEL__ */ #endif /* _LINUX_FS_H */ -- cgit v1.2.3-18-g5258 From 3cd90ea42f2c15f928b70ed66f6d8ed0a8e7aadd Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Tue, 1 Feb 2011 15:52:46 -0800 Subject: vfs: sparse: add __FMODE_EXEC FMODE_EXEC is a constant type of fmode_t but was used with normal integer constants. This results in following warnings from sparse. Fix it using new macro __FMODE_EXEC. fs/exec.c:116:58: warning: restricted fmode_t degrades to integer fs/exec.c:689:58: warning: restricted fmode_t degrades to integer fs/fcntl.c:777:9: warning: restricted fmode_t degrades to integer Signed-off-by: Namhyung Kim Cc: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/exec.c | 4 ++-- fs/fcntl.c | 2 +- include/linux/fs.h | 1 + 3 files changed, 4 insertions(+), 3 deletions(-) diff --git a/fs/exec.c b/fs/exec.c index c62efcb959c..52a447d9b6a 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -120,7 +120,7 @@ SYSCALL_DEFINE1(uselib, const char __user *, library) goto out; file = do_filp_open(AT_FDCWD, tmp, - O_LARGEFILE | O_RDONLY | FMODE_EXEC, 0, + O_LARGEFILE | O_RDONLY | __FMODE_EXEC, 0, MAY_READ | MAY_EXEC | MAY_OPEN); putname(tmp); error = PTR_ERR(file); @@ -723,7 +723,7 @@ struct file *open_exec(const char *name) int err; file = do_filp_open(AT_FDCWD, name, - O_LARGEFILE | O_RDONLY | FMODE_EXEC, 0, + O_LARGEFILE | O_RDONLY | __FMODE_EXEC, 0, MAY_EXEC | MAY_OPEN); if (IS_ERR(file)) goto out; diff --git a/fs/fcntl.c b/fs/fcntl.c index ecc8b3954ed..cb1026181bd 100644 --- a/fs/fcntl.c +++ b/fs/fcntl.c @@ -815,7 +815,7 @@ static int __init fcntl_init(void) __O_SYNC | O_DSYNC | FASYNC | O_DIRECT | O_LARGEFILE | O_DIRECTORY | O_NOFOLLOW | O_NOATIME | O_CLOEXEC | - FMODE_EXEC + __FMODE_EXEC )); fasync_cache = kmem_cache_create("fasync_cache", diff --git a/include/linux/fs.h b/include/linux/fs.h index 675678a01f5..bd3215940c3 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2555,6 +2555,7 @@ int proc_nr_inodes(struct ctl_table *table, int write, void __user *buffer, size_t *lenp, loff_t *ppos); int __init get_filesystem_list(char *buf); +#define __FMODE_EXEC ((__force int) FMODE_EXEC) #define __FMODE_NONOTIFY ((__force int) FMODE_NONOTIFY) #define ACC_MODE(x) ("\004\002\006\006"[(x)&O_ACCMODE]) -- cgit v1.2.3-18-g5258 From d54cdc8ca7aabc69e145a62155855db42b04ed0b Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 1 Feb 2011 15:52:47 -0800 Subject: fs: make block fiemap mapping length at least blocksize long Some filesystems don't deal well with being asked to map less than blocksize blocks (GFS2 for example). Since we are always mapping at least blocksize sections anyway, just make sure len is at least as big as a blocksize so we don't trip up any filesystems. Thanks, Signed-off-by: Josef Bacik Cc: Steven Whitehouse Cc: Christoph Hellwig Cc: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ioctl.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/fs/ioctl.c b/fs/ioctl.c index a59635e295f..1eebeb72b20 100644 --- a/fs/ioctl.c +++ b/fs/ioctl.c @@ -273,6 +273,13 @@ int __generic_block_fiemap(struct inode *inode, len = isize; } + /* + * Some filesystems can't deal with being asked to map less than + * blocksize, so make sure our len is at least block length. + */ + if (logical_to_blk(inode, len) == 0) + len = blk_to_logical(inode, 1); + start_blk = logical_to_blk(inode, start); last_blk = logical_to_blk(inode, start + len - 1); -- cgit v1.2.3-18-g5258 From 0b0abeaf3d30cec03ac6497fe978b8f7edecc5ae Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Wed, 2 Feb 2011 21:02:12 +0200 Subject: Revert "exofs: Set i_mapping->backing_dev_info anyway" This reverts commit 115e19c53501edc11f730191f7f047736815ae3d. Apparently setting inode->bdi to one's own sb->s_bdi stops VFS from sending *read-aheads*. This problem was bisected to this commit. A revert fixes it. I'll investigate farther why is this happening for the next Kernel, but for now a revert. I'm sending to stable@kernel.org as well, since it exists also in 2.6.37. 2.6.36 is good and does not have this patch. CC: Stable Tree Signed-off-by: Boaz Harrosh Signed-off-by: Linus Torvalds --- fs/exofs/inode.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/fs/exofs/inode.c b/fs/exofs/inode.c index 42685424817..a7555238c41 100644 --- a/fs/exofs/inode.c +++ b/fs/exofs/inode.c @@ -1030,7 +1030,6 @@ struct inode *exofs_iget(struct super_block *sb, unsigned long ino) memcpy(oi->i_data, fcb.i_data, sizeof(fcb.i_data)); } - inode->i_mapping->backing_dev_info = sb->s_bdi; if (S_ISREG(inode->i_mode)) { inode->i_op = &exofs_file_inode_operations; inode->i_fop = &exofs_file_operations; @@ -1131,7 +1130,6 @@ struct inode *exofs_new_inode(struct inode *dir, int mode) sbi = sb->s_fs_info; - inode->i_mapping->backing_dev_info = sb->s_bdi; sb->s_dirt = 1; inode_init_owner(inode, dir, mode); inode->i_ino = sbi->s_nextid++; -- cgit v1.2.3-18-g5258 From e4a9ea5ee7c8812a7bf0c3fb725ceeaa3d4c2fcc Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 27 Jan 2011 09:15:30 -0500 Subject: tracing: Replace trace_event struct array with pointer array Currently the trace_event structures are placed in the _ftrace_events section, and at link time, the linker makes one large array of all the trace_event structures. On boot up, this array is read (much like the initcall sections) and the events are processed. The problem is that there is no guarantee that gcc will place complex structures nicely together in an array format. Two structures in the same file may be placed awkwardly, because gcc has no clue that they are suppose to be in an array. A hack was used previous to force the alignment to 4, to pack the structures together. But this caused alignment issues with other architectures (sparc). Instead of packing the structures into an array, the structures' addresses are now put into the _ftrace_event section. As pointers are always the natural alignment, gcc should always pack them tightly together (otherwise initcall, extable, etc would also fail). By having the pointers to the structures in the section, we can still iterate the trace_events without causing unnecessary alignment problems with other architectures, or depending on the current behaviour of gcc that will likely change in the future just to tick us kernel developers off a little more. The _ftrace_event section is also moved into the .init.data section as it is now only needed at boot up. Suggested-by: David Miller Cc: Mathieu Desnoyers Acked-by: David S. Miller Signed-off-by: Steven Rostedt --- include/asm-generic/vmlinux.lds.h | 7 +++---- include/linux/module.h | 2 +- include/linux/syscalls.h | 10 ++++++---- include/trace/ftrace.h | 24 +++++++++++++----------- kernel/trace/trace_events.c | 12 ++++++------ kernel/trace/trace_export.c | 6 +++--- 6 files changed, 32 insertions(+), 29 deletions(-) diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index 6ebb81030d2..f53708be95e 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -124,7 +124,8 @@ #endif #ifdef CONFIG_EVENT_TRACING -#define FTRACE_EVENTS() VMLINUX_SYMBOL(__start_ftrace_events) = .; \ +#define FTRACE_EVENTS() . = ALIGN(8); \ + VMLINUX_SYMBOL(__start_ftrace_events) = .; \ *(_ftrace_events) \ VMLINUX_SYMBOL(__stop_ftrace_events) = .; #else @@ -179,9 +180,6 @@ TRACE_PRINTKS() \ \ STRUCT_ALIGN(); \ - FTRACE_EVENTS() \ - \ - STRUCT_ALIGN(); \ TRACE_SYSCALLS() /* @@ -482,6 +480,7 @@ KERNEL_CTORS() \ *(.init.rodata) \ MCOUNT_REC() \ + FTRACE_EVENTS() \ DEV_DISCARD(init.rodata) \ CPU_DISCARD(init.rodata) \ MEM_DISCARD(init.rodata) \ diff --git a/include/linux/module.h b/include/linux/module.h index e7c6385c668..7695a303bb5 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -389,7 +389,7 @@ struct module unsigned int num_trace_bprintk_fmt; #endif #ifdef CONFIG_EVENT_TRACING - struct ftrace_event_call *trace_events; + struct ftrace_event_call **trace_events; unsigned int num_trace_events; #endif #ifdef CONFIG_FTRACE_MCOUNT_RECORD diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 18cd0684fc4..45508fec366 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -128,28 +128,30 @@ extern struct trace_event_functions exit_syscall_print_funcs; static struct syscall_metadata \ __attribute__((__aligned__(4))) __syscall_meta_##sname; \ static struct ftrace_event_call __used \ - __attribute__((__aligned__(4))) \ - __attribute__((section("_ftrace_events"))) \ event_enter_##sname = { \ .name = "sys_enter"#sname, \ .class = &event_class_syscall_enter, \ .event.funcs = &enter_syscall_print_funcs, \ .data = (void *)&__syscall_meta_##sname,\ }; \ + static struct ftrace_event_call __used \ + __attribute__((section("_ftrace_events"))) \ + *__event_enter_##sname = &event_enter_##sname; \ __TRACE_EVENT_FLAGS(enter_##sname, TRACE_EVENT_FL_CAP_ANY) #define SYSCALL_TRACE_EXIT_EVENT(sname) \ static struct syscall_metadata \ __attribute__((__aligned__(4))) __syscall_meta_##sname; \ static struct ftrace_event_call __used \ - __attribute__((__aligned__(4))) \ - __attribute__((section("_ftrace_events"))) \ event_exit_##sname = { \ .name = "sys_exit"#sname, \ .class = &event_class_syscall_exit, \ .event.funcs = &exit_syscall_print_funcs, \ .data = (void *)&__syscall_meta_##sname,\ }; \ + static struct ftrace_event_call __used \ + __attribute__((section("_ftrace_events"))) \ + *__event_exit_##sname = &event_exit_##sname; \ __TRACE_EVENT_FLAGS(exit_##sname, TRACE_EVENT_FL_CAP_ANY) #define SYSCALL_METADATA(sname, nb) \ diff --git a/include/trace/ftrace.h b/include/trace/ftrace.h index e16610c208c..3e68366d485 100644 --- a/include/trace/ftrace.h +++ b/include/trace/ftrace.h @@ -446,14 +446,16 @@ static inline notrace int ftrace_get_offsets_##call( \ * .reg = ftrace_event_reg, * }; * - * static struct ftrace_event_call __used - * __attribute__((__aligned__(4))) - * __attribute__((section("_ftrace_events"))) event_ = { + * static struct ftrace_event_call event_ = { * .name = "", * .class = event_class_