From 00d201001bd4e8a46e3d03c970abcb72256c368b Mon Sep 17 00:00:00 2001 From: Shahar Levi Date: Mon, 8 Nov 2010 11:20:10 +0000 Subject: wl1271: Change wl12xx Files Names All files name prefix removed due to the fact that wl12xx driver supports wl1271 and wl1273. Also the definition in Kconfig and header files changed respectively. Signed-off-by: Shahar Levi Signed-off-by: Luciano Coelho --- drivers/net/wireless/wl12xx/Kconfig | 52 +- drivers/net/wireless/wl12xx/Makefile | 17 +- drivers/net/wireless/wl12xx/acx.c | 1336 ++++++++++++ drivers/net/wireless/wl12xx/acx.h | 1185 +++++++++++ drivers/net/wireless/wl12xx/boot.c | 591 ++++++ drivers/net/wireless/wl12xx/boot.h | 71 + drivers/net/wireless/wl12xx/cmd.c | 783 +++++++ drivers/net/wireless/wl12xx/cmd.h | 459 +++++ drivers/net/wireless/wl12xx/conf.h | 1105 ++++++++++ drivers/net/wireless/wl12xx/debugfs.c | 590 ++++++ drivers/net/wireless/wl12xx/debugfs.h | 33 + drivers/net/wireless/wl12xx/event.c | 293 +++ drivers/net/wireless/wl12xx/event.h | 126 ++ drivers/net/wireless/wl12xx/ini.h | 123 ++ drivers/net/wireless/wl12xx/init.c | 369 ++++ drivers/net/wireless/wl12xx/init.h | 36 + drivers/net/wireless/wl12xx/io.c | 170 ++ drivers/net/wireless/wl12xx/io.h | 172 ++ drivers/net/wireless/wl12xx/main.c | 2749 +++++++++++++++++++++++++ drivers/net/wireless/wl12xx/ps.c | 178 ++ drivers/net/wireless/wl12xx/ps.h | 36 + drivers/net/wireless/wl12xx/reg.h | 614 ++++++ drivers/net/wireless/wl12xx/rx.c | 203 ++ drivers/net/wireless/wl12xx/rx.h | 121 ++ drivers/net/wireless/wl12xx/scan.c | 307 +++ drivers/net/wireless/wl12xx/scan.h | 109 + drivers/net/wireless/wl12xx/sdio.c | 347 ++++ drivers/net/wireless/wl12xx/spi.c | 498 +++++ drivers/net/wireless/wl12xx/testmode.c | 290 +++ drivers/net/wireless/wl12xx/testmode.h | 31 + drivers/net/wireless/wl12xx/tx.c | 485 +++++ drivers/net/wireless/wl12xx/tx.h | 150 ++ drivers/net/wireless/wl12xx/wl1271.h | 523 ----- drivers/net/wireless/wl12xx/wl1271_acx.c | 1336 ------------ drivers/net/wireless/wl12xx/wl1271_acx.h | 1185 ----------- drivers/net/wireless/wl12xx/wl1271_boot.c | 591 ------ drivers/net/wireless/wl12xx/wl1271_boot.h | 71 - drivers/net/wireless/wl12xx/wl1271_cmd.c | 783 ------- drivers/net/wireless/wl12xx/wl1271_cmd.h | 459 ----- drivers/net/wireless/wl12xx/wl1271_conf.h | 1105 ---------- drivers/net/wireless/wl12xx/wl1271_debugfs.c | 590 ------ drivers/net/wireless/wl12xx/wl1271_debugfs.h | 33 - drivers/net/wireless/wl12xx/wl1271_event.c | 293 --- drivers/net/wireless/wl12xx/wl1271_event.h | 126 -- drivers/net/wireless/wl12xx/wl1271_ini.h | 123 -- drivers/net/wireless/wl12xx/wl1271_init.c | 369 ---- drivers/net/wireless/wl12xx/wl1271_init.h | 36 - drivers/net/wireless/wl12xx/wl1271_io.c | 170 -- drivers/net/wireless/wl12xx/wl1271_io.h | 172 -- drivers/net/wireless/wl12xx/wl1271_main.c | 2749 ------------------------- drivers/net/wireless/wl12xx/wl1271_ps.c | 178 -- drivers/net/wireless/wl12xx/wl1271_ps.h | 36 - drivers/net/wireless/wl12xx/wl1271_reg.h | 614 ------ drivers/net/wireless/wl12xx/wl1271_rx.c | 203 -- drivers/net/wireless/wl12xx/wl1271_rx.h | 121 -- drivers/net/wireless/wl12xx/wl1271_scan.c | 307 --- drivers/net/wireless/wl12xx/wl1271_scan.h | 109 - drivers/net/wireless/wl12xx/wl1271_sdio.c | 347 ---- drivers/net/wireless/wl12xx/wl1271_spi.c | 498 ----- drivers/net/wireless/wl12xx/wl1271_testmode.c | 290 --- drivers/net/wireless/wl12xx/wl1271_testmode.h | 31 - drivers/net/wireless/wl12xx/wl1271_tx.c | 485 ----- drivers/net/wireless/wl12xx/wl1271_tx.h | 150 -- drivers/net/wireless/wl12xx/wl12xx.h | 523 +++++ 64 files changed, 14119 insertions(+), 14116 deletions(-) create mode 100644 drivers/net/wireless/wl12xx/acx.c create mode 100644 drivers/net/wireless/wl12xx/acx.h create mode 100644 drivers/net/wireless/wl12xx/boot.c create mode 100644 drivers/net/wireless/wl12xx/boot.h create mode 100644 drivers/net/wireless/wl12xx/cmd.c create mode 100644 drivers/net/wireless/wl12xx/cmd.h create mode 100644 drivers/net/wireless/wl12xx/conf.h create mode 100644 drivers/net/wireless/wl12xx/debugfs.c create mode 100644 drivers/net/wireless/wl12xx/debugfs.h create mode 100644 drivers/net/wireless/wl12xx/event.c create mode 100644 drivers/net/wireless/wl12xx/event.h create mode 100644 drivers/net/wireless/wl12xx/ini.h create mode 100644 drivers/net/wireless/wl12xx/init.c create mode 100644 drivers/net/wireless/wl12xx/init.h create mode 100644 drivers/net/wireless/wl12xx/io.c create mode 100644 drivers/net/wireless/wl12xx/io.h create mode 100644 drivers/net/wireless/wl12xx/main.c create mode 100644 drivers/net/wireless/wl12xx/ps.c create mode 100644 drivers/net/wireless/wl12xx/ps.h create mode 100644 drivers/net/wireless/wl12xx/reg.h create mode 100644 drivers/net/wireless/wl12xx/rx.c create mode 100644 drivers/net/wireless/wl12xx/rx.h create mode 100644 drivers/net/wireless/wl12xx/scan.c create mode 100644 drivers/net/wireless/wl12xx/scan.h create mode 100644 drivers/net/wireless/wl12xx/sdio.c create mode 100644 drivers/net/wireless/wl12xx/spi.c create mode 100644 drivers/net/wireless/wl12xx/testmode.c create mode 100644 drivers/net/wireless/wl12xx/testmode.h create mode 100644 drivers/net/wireless/wl12xx/tx.c create mode 100644 drivers/net/wireless/wl12xx/tx.h delete mode 100644 drivers/net/wireless/wl12xx/wl1271.h delete mode 100644 drivers/net/wireless/wl12xx/wl1271_acx.c delete mode 100644 drivers/net/wireless/wl12xx/wl1271_acx.h delete mode 100644 drivers/net/wireless/wl12xx/wl1271_boot.c delete mode 100644 drivers/net/wireless/wl12xx/wl1271_boot.h delete mode 100644 drivers/net/wireless/wl12xx/wl1271_cmd.c delete mode 100644 drivers/net/wireless/wl12xx/wl1271_cmd.h delete mode 100644 drivers/net/wireless/wl12xx/wl1271_conf.h delete mode 100644 drivers/net/wireless/wl12xx/wl1271_debugfs.c delete mode 100644 drivers/net/wireless/wl12xx/wl1271_debugfs.h delete mode 100644 drivers/net/wireless/wl12xx/wl1271_event.c delete mode 100644 drivers/net/wireless/wl12xx/wl1271_event.h delete mode 100644 drivers/net/wireless/wl12xx/wl1271_ini.h delete mode 100644 drivers/net/wireless/wl12xx/wl1271_init.c delete mode 100644 drivers/net/wireless/wl12xx/wl1271_init.h delete mode 100644 drivers/net/wireless/wl12xx/wl1271_io.c delete mode 100644 drivers/net/wireless/wl12xx/wl1271_io.h delete mode 100644 drivers/net/wireless/wl12xx/wl1271_main.c delete mode 100644 drivers/net/wireless/wl12xx/wl1271_ps.c delete mode 100644 drivers/net/wireless/wl12xx/wl1271_ps.h delete mode 100644 drivers/net/wireless/wl12xx/wl1271_reg.h delete mode 100644 drivers/net/wireless/wl12xx/wl1271_rx.c delete mode 100644 drivers/net/wireless/wl12xx/wl1271_rx.h delete mode 100644 drivers/net/wireless/wl12xx/wl1271_scan.c delete mode 100644 drivers/net/wireless/wl12xx/wl1271_scan.h delete mode 100644 drivers/net/wireless/wl12xx/wl1271_sdio.c delete mode 100644 drivers/net/wireless/wl12xx/wl1271_spi.c delete mode 100644 drivers/net/wireless/wl12xx/wl1271_testmode.c delete mode 100644 drivers/net/wireless/wl12xx/wl1271_testmode.h delete mode 100644 drivers/net/wireless/wl12xx/wl1271_tx.c delete mode 100644 drivers/net/wireless/wl12xx/wl1271_tx.h create mode 100644 drivers/net/wireless/wl12xx/wl12xx.h diff --git a/drivers/net/wireless/wl12xx/Kconfig b/drivers/net/wireless/wl12xx/Kconfig index 02ad4bc1597..d2adeb1f72b 100644 --- a/drivers/net/wireless/wl12xx/Kconfig +++ b/drivers/net/wireless/wl12xx/Kconfig @@ -1,56 +1,58 @@ -menuconfig WL12XX +menuconfig WL12XX_MENU tristate "TI wl12xx driver support" depends on MAC80211 && EXPERIMENTAL ---help--- - This will enable TI wl12xx driver support. The drivers make - use of the mac80211 stack. + This will enable TI wl12xx driver support for the following chips: + wl1271 and wl1273. + The drivers make use of the mac80211 stack. -config WL1271 - tristate "TI wl1271 support" - depends on WL12XX && GENERIC_HARDIRQS +config WL12XX + tristate "TI wl12xx support" + depends on WL12XX_MENU && GENERIC_HARDIRQS depends on INET select FW_LOADER select CRC7 ---help--- - This module adds support for wireless adapters based on the - TI wl1271 chipset. + This module adds support for wireless adapters based on TI wl1271 and + TI wl1273 chipsets. This module does *not* include support for wl1251. + For wl1251 support, use the separate homonymous driver instead. - If you choose to build a module, it'll be called wl1271. Say N if + If you choose to build a module, it will be called wl12xx. Say N if unsure. -config WL1271_HT - bool "TI wl1271 802.11 HT support (EXPERIMENTAL)" - depends on WL1271 && EXPERIMENTAL +config WL12XX_HT + bool "TI wl12xx 802.11 HT support (EXPERIMENTAL)" + depends on WL12XX && EXPERIMENTAL default n ---help--- - This will enable 802.11 HT support for TI wl1271 chipset. + This will enable 802.11 HT support in the wl12xx module. That configuration is temporary due to the code incomplete and still in testing process. -config WL1271_SPI - tristate "TI wl1271 SPI support" - depends on WL1271 && SPI_MASTER +config WL12XX_SPI + tristate "TI wl12xx SPI support" + depends on WL12XX && SPI_MASTER ---help--- This module adds support for the SPI interface of adapters using - TI wl1271 chipset. Select this if your platform is using + TI wl12xx chipsets. Select this if your platform is using the SPI bus. - If you choose to build a module, it'll be called wl1251_spi. + If you choose to build a module, it'll be called wl12xx_spi. Say N if unsure. -config WL1271_SDIO - tristate "TI wl1271 SDIO support" - depends on WL1271 && MMC +config WL12XX_SDIO + tristate "TI wl12xx SDIO support" + depends on WL12XX && MMC ---help--- This module adds support for the SDIO interface of adapters using - TI wl1271 chipset. Select this if your platform is using + TI wl12xx chipsets. Select this if your platform is using the SDIO bus. - If you choose to build a module, it'll be called - wl1271_sdio. Say N if unsure. + If you choose to build a module, it'll be called wl12xx_sdio. + Say N if unsure. config WL12XX_PLATFORM_DATA bool - depends on WL1271_SDIO != n || WL1251_SDIO != n + depends on WL12XX_SDIO != n || WL1251_SDIO != n default y diff --git a/drivers/net/wireless/wl12xx/Makefile b/drivers/net/wireless/wl12xx/Makefile index 3a807444b2a..005a758174d 100644 --- a/drivers/net/wireless/wl12xx/Makefile +++ b/drivers/net/wireless/wl12xx/Makefile @@ -1,12 +1,13 @@ -wl1271-objs = wl1271_main.o wl1271_cmd.o wl1271_io.o \ - wl1271_event.o wl1271_tx.o wl1271_rx.o \ - wl1271_ps.o wl1271_acx.o wl1271_boot.o \ - wl1271_init.o wl1271_debugfs.o wl1271_scan.o +wl12xx-objs = main.o cmd.o io.o event.o tx.o rx.o ps.o acx.o \ + boot.o init.o debugfs.o scan.o -wl1271-$(CONFIG_NL80211_TESTMODE) += wl1271_testmode.o -obj-$(CONFIG_WL1271) += wl1271.o -obj-$(CONFIG_WL1271_SPI) += wl1271_spi.o -obj-$(CONFIG_WL1271_SDIO) += wl1271_sdio.o +wl12xx_spi-objs = spi.o +wl12xx_sdio-objs = sdio.o + +wl12xx-$(CONFIG_NL80211_TESTMODE) += testmode.o +obj-$(CONFIG_WL12XX) += wl12xx.o +obj-$(CONFIG_WL12XX_SPI) += wl12xx_spi.o +obj-$(CONFIG_WL12XX_SDIO) += wl12xx_sdio.o # small builtin driver bit obj-$(CONFIG_WL12XX_PLATFORM_DATA) += wl12xx_platform_data.o diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c new file mode 100644 index 00000000000..bc1085bb6cf --- /dev/null +++ b/drivers/net/wireless/wl12xx/acx.c @@ -0,0 +1,1336 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include "acx.h" + +#include +#include +#include +#include +#include + +#include "wl12xx.h" +#include "wl12xx_80211.h" +#include "reg.h" +#include "ps.h" + +int wl1271_acx_wake_up_conditions(struct wl1271 *wl) +{ + struct acx_wake_up_condition *wake_up; + int ret; + + wl1271_debug(DEBUG_ACX, "acx wake up conditions"); + + wake_up = kzalloc(sizeof(*wake_up), GFP_KERNEL); + if (!wake_up) { + ret = -ENOMEM; + goto out; + } + + wake_up->wake_up_event = wl->conf.conn.wake_up_event; + wake_up->listen_interval = wl->conf.conn.listen_interval; + + ret = wl1271_cmd_configure(wl, ACX_WAKE_UP_CONDITIONS, + wake_up, sizeof(*wake_up)); + if (ret < 0) { + wl1271_warning("could not set wake up conditions: %d", ret); + goto out; + } + +out: + kfree(wake_up); + return ret; +} + +int wl1271_acx_sleep_auth(struct wl1271 *wl, u8 sleep_auth) +{ + struct acx_sleep_auth *auth; + int ret; + + wl1271_debug(DEBUG_ACX, "acx sleep auth"); + + auth = kzalloc(sizeof(*auth), GFP_KERNEL); + if (!auth) { + ret = -ENOMEM; + goto out; + } + + auth->sleep_auth = sleep_auth; + + ret = wl1271_cmd_configure(wl, ACX_SLEEP_AUTH, auth, sizeof(*auth)); + if (ret < 0) + return ret; + +out: + kfree(auth); + return ret; +} + +int wl1271_acx_tx_power(struct wl1271 *wl, int power) +{ + struct acx_current_tx_power *acx; + int ret; + + wl1271_debug(DEBUG_ACX, "acx dot11_cur_tx_pwr"); + + if (power < 0 || power > 25) + return -EINVAL; + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + acx->current_tx_power = power * 10; + + ret = wl1271_cmd_configure(wl, DOT11_CUR_TX_PWR, acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("configure of tx power failed: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} + +int wl1271_acx_feature_cfg(struct wl1271 *wl) +{ + struct acx_feature_config *feature; + int ret; + + wl1271_debug(DEBUG_ACX, "acx feature cfg"); + + feature = kzalloc(sizeof(*feature), GFP_KERNEL); + if (!feature) { + ret = -ENOMEM; + goto out; + } + + /* DF_ENCRYPTION_DISABLE and DF_SNIFF_MODE_ENABLE are disabled */ + feature->data_flow_options = 0; + feature->options = 0; + + ret = wl1271_cmd_configure(wl, ACX_FEATURE_CFG, + feature, sizeof(*feature)); + if (ret < 0) { + wl1271_error("Couldnt set HW encryption"); + goto out; + } + +out: + kfree(feature); + return ret; +} + +int wl1271_acx_mem_map(struct wl1271 *wl, struct acx_header *mem_map, + size_t len) +{ + int ret; + + wl1271_debug(DEBUG_ACX, "acx mem map"); + + ret = wl1271_cmd_interrogate(wl, ACX_MEM_MAP, mem_map, len); + if (ret < 0) + return ret; + + return 0; +} + +int wl1271_acx_rx_msdu_life_time(struct wl1271 *wl) +{ + struct acx_rx_msdu_lifetime *acx; + int ret; + + wl1271_debug(DEBUG_ACX, "acx rx msdu life time"); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + acx->lifetime = cpu_to_le32(wl->conf.rx.rx_msdu_life_time); + ret = wl1271_cmd_configure(wl, DOT11_RX_MSDU_LIFE_TIME, + acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("failed to set rx msdu life time: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} + +int wl1271_acx_rx_config(struct wl1271 *wl, u32 config, u32 filter) +{ + struct acx_rx_config *rx_config; + int ret; + + wl1271_debug(DEBUG_ACX, "acx rx config"); + + rx_config = kzalloc(sizeof(*rx_config), GFP_KERNEL); + if (!rx_config) { + ret = -ENOMEM; + goto out; + } + + rx_config->config_options = cpu_to_le32(config); + rx_config->filter_options = cpu_to_le32(filter); + + ret = wl1271_cmd_configure(wl, ACX_RX_CFG, + rx_config, sizeof(*rx_config)); + if (ret < 0) { + wl1271_warning("failed to set rx config: %d", ret); + goto out; + } + +out: + kfree(rx_config); + return ret; +} + +int wl1271_acx_pd_threshold(struct wl1271 *wl) +{ + struct acx_packet_detection *pd; + int ret; + + wl1271_debug(DEBUG_ACX, "acx data pd threshold"); + + pd = kzalloc(sizeof(*pd), GFP_KERNEL); + if (!pd) { + ret = -ENOMEM; + goto out; + } + + pd->threshold = cpu_to_le32(wl->conf.rx.packet_detection_threshold); + + ret = wl1271_cmd_configure(wl, ACX_PD_THRESHOLD, pd, sizeof(*pd)); + if (ret < 0) { + wl1271_warning("failed to set pd threshold: %d", ret); + goto out; + } + +out: + kfree(pd); + return ret; +} + +int wl1271_acx_slot(struct wl1271 *wl, enum acx_slot_type slot_time) +{ + struct acx_slot *slot; + int ret; + + wl1271_debug(DEBUG_ACX, "acx slot"); + + slot = kzalloc(sizeof(*slot), GFP_KERNEL); + if (!slot) { + ret = -ENOMEM; + goto out; + } + + slot->wone_index = STATION_WONE_INDEX; + slot->slot_time = slot_time; + + ret = wl1271_cmd_configure(wl, ACX_SLOT, slot, sizeof(*slot)); + if (ret < 0) { + wl1271_warning("failed to set slot time: %d", ret); + goto out; + } + +out: + kfree(slot); + return ret; +} + +int wl1271_acx_group_address_tbl(struct wl1271 *wl, bool enable, + void *mc_list, u32 mc_list_len) +{ + struct acx_dot11_grp_addr_tbl *acx; + int ret; + + wl1271_debug(DEBUG_ACX, "acx group address tbl"); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + /* MAC filtering */ + acx->enabled = enable; + acx->num_groups = mc_list_len; + memcpy(acx->mac_table, mc_list, mc_list_len * ETH_ALEN); + + ret = wl1271_cmd_configure(wl, DOT11_GROUP_ADDRESS_TBL, + acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("failed to set group addr table: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} + +int wl1271_acx_service_period_timeout(struct wl1271 *wl) +{ + struct acx_rx_timeout *rx_timeout; + int ret; + + rx_timeout = kzalloc(sizeof(*rx_timeout), GFP_KERNEL); + if (!rx_timeout) { + ret = -ENOMEM; + goto out; + } + + wl1271_debug(DEBUG_ACX, "acx service period timeout"); + + rx_timeout->ps_poll_timeout = cpu_to_le16(wl->conf.rx.ps_poll_timeout); + rx_timeout->upsd_timeout = cpu_to_le16(wl->conf.rx.upsd_timeout); + + ret = wl1271_cmd_configure(wl, ACX_SERVICE_PERIOD_TIMEOUT, + rx_timeout, sizeof(*rx_timeout)); + if (ret < 0) { + wl1271_warning("failed to set service period timeout: %d", + ret); + goto out; + } + +out: + kfree(rx_timeout); + return ret; +} + +int wl1271_acx_rts_threshold(struct wl1271 *wl, u16 rts_threshold) +{ + struct acx_rts_threshold *rts; + int ret; + + wl1271_debug(DEBUG_ACX, "acx rts threshold"); + + rts = kzalloc(sizeof(*rts), GFP_KERNEL); + if (!rts) { + ret = -ENOMEM; + goto out; + } + + rts->threshold = cpu_to_le16(rts_threshold); + + ret = wl1271_cmd_configure(wl, DOT11_RTS_THRESHOLD, rts, sizeof(*rts)); + if (ret < 0) { + wl1271_warning("failed to set rts threshold: %d", ret); + goto out; + } + +out: + kfree(rts); + return ret; +} + +int wl1271_acx_dco_itrim_params(struct wl1271 *wl) +{ + struct acx_dco_itrim_params *dco; + struct conf_itrim_settings *c = &wl->conf.itrim; + int ret; + + wl1271_debug(DEBUG_ACX, "acx dco itrim parameters"); + + dco = kzalloc(sizeof(*dco), GFP_KERNEL); + if (!dco) { + ret = -ENOMEM; + goto out; + } + + dco->enable = c->enable; + dco->timeout = cpu_to_le32(c->timeout); + + ret = wl1271_cmd_configure(wl, ACX_SET_DCO_ITRIM_PARAMS, + dco, sizeof(*dco)); + if (ret < 0) { + wl1271_warning("failed to set dco itrim parameters: %d", ret); + goto out; + } + +out: + kfree(dco); + return ret; +} + +int wl1271_acx_beacon_filter_opt(struct wl1271 *wl, bool enable_filter) +{ + struct acx_beacon_filter_option *beacon_filter = NULL; + int ret = 0; + + wl1271_debug(DEBUG_ACX, "acx beacon filter opt"); + + if (enable_filter && + wl->conf.conn.bcn_filt_mode == CONF_BCN_FILT_MODE_DISABLED) + goto out; + + beacon_filter = kzalloc(sizeof(*beacon_filter), GFP_KERNEL); + if (!beacon_filter) { + ret = -ENOMEM; + goto out; + } + + beacon_filter->enable = enable_filter; + + /* + * When set to zero, and the filter is enabled, beacons + * without the unicast TIM bit set are dropped. + */ + beacon_filter->max_num_beacons = 0; + + ret = wl1271_cmd_configure(wl, ACX_BEACON_FILTER_OPT, + beacon_filter, sizeof(*beacon_filter)); + if (ret < 0) { + wl1271_warning("failed to set beacon filter opt: %d", ret); + goto out; + } + +out: + kfree(beacon_filter); + return ret; +} + +int wl1271_acx_beacon_filter_table(struct wl1271 *wl) +{ + struct acx_beacon_filter_ie_table *ie_table; + int i, idx = 0; + int ret; + bool vendor_spec = false; + + wl1271_debug(DEBUG_ACX, "acx beacon filter table"); + + ie_table = kzalloc(sizeof(*ie_table), GFP_KERNEL); + if (!ie_table) { + ret = -ENOMEM; + goto out; + } + + /* configure default beacon pass-through rules */ + ie_table->num_ie = 0; + for (i = 0; i < wl->conf.conn.bcn_filt_ie_count; i++) { + struct conf_bcn_filt_rule *r = &(wl->conf.conn.bcn_filt_ie[i]); + ie_table->table[idx++] = r->ie; + ie_table->table[idx++] = r->rule; + + if (r->ie == WLAN_EID_VENDOR_SPECIFIC) { + /* only one vendor specific ie allowed */ + if (vendor_spec) + continue; + + /* for vendor specific rules configure the + additional fields */ + memcpy(&(ie_table->table[idx]), r->oui, + CONF_BCN_IE_OUI_LEN); + idx += CONF_BCN_IE_OUI_LEN; + ie_table->table[idx++] = r->type; + memcpy(&(ie_table->table[idx]), r->version, + CONF_BCN_IE_VER_LEN); + idx += CONF_BCN_IE_VER_LEN; + vendor_spec = true; + } + + ie_table->num_ie++; + } + + ret = wl1271_cmd_configure(wl, ACX_BEACON_FILTER_TABLE, + ie_table, sizeof(*ie_table)); + if (ret < 0) { + wl1271_warning("failed to set beacon filter table: %d", ret); + goto out; + } + +out: + kfree(ie_table); + return ret; +} + +#define ACX_CONN_MONIT_DISABLE_VALUE 0xffffffff + +int wl1271_acx_conn_monit_params(struct wl1271 *wl, bool enable) +{ + struct acx_conn_monit_params *acx; + u32 threshold = ACX_CONN_MONIT_DISABLE_VALUE; + u32 timeout = ACX_CONN_MONIT_DISABLE_VALUE; + int ret; + + wl1271_debug(DEBUG_ACX, "acx connection monitor parameters: %s", + enable ? "enabled" : "disabled"); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + if (enable) { + threshold = wl->conf.conn.synch_fail_thold; + timeout = wl->conf.conn.bss_lose_timeout; + } + + acx->synch_fail_thold = cpu_to_le32(threshold); + acx->bss_lose_timeout = cpu_to_le32(timeout); + + ret = wl1271_cmd_configure(wl, ACX_CONN_MONIT_PARAMS, + acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("failed to set connection monitor " + "parameters: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} + + +int wl1271_acx_sg_enable(struct wl1271 *wl, bool enable) +{ + struct acx_bt_wlan_coex *pta; + int ret; + + wl1271_debug(DEBUG_ACX, "acx sg enable"); + + pta = kzalloc(sizeof(*pta), GFP_KERNEL); + if (!pta) { + ret = -ENOMEM; + goto out; + } + + if (enable) + pta->enable = wl->conf.sg.state; + else + pta->enable = CONF_SG_DISABLE; + + ret = wl1271_cmd_configure(wl, ACX_SG_ENABLE, pta, sizeof(*pta)); + if (ret < 0) { + wl1271_warning("failed to set softgemini enable: %d", ret); + goto out; + } + +out: + kfree(pta); + return ret; +} + +int wl1271_acx_sg_cfg(struct wl1271 *wl) +{ + struct acx_bt_wlan_coex_param *param; + struct conf_sg_settings *c = &wl->conf.sg; + int i, ret; + + wl1271_debug(DEBUG_ACX, "acx sg cfg"); + + param = kzalloc(sizeof(*param), GFP_KERNEL); + if (!param) { + ret = -ENOMEM; + goto out; + } + + /* BT-WLAN coext parameters */ + for (i = 0; i < CONF_SG_PARAMS_MAX; i++) + param->params[i] = cpu_to_le32(c->params[i]); + param->param_idx = CONF_SG_PARAMS_ALL; + + ret = wl1271_cmd_configure(wl, ACX_SG_CFG, param, sizeof(*param)); + if (ret < 0) { + wl1271_warning("failed to set sg config: %d", ret); + goto out; + } + +out: + kfree(param); + return ret; +} + +int wl1271_acx_cca_threshold(struct wl1271 *wl) +{ + struct acx_energy_detection *detection; + int ret; + + wl1271_debug(DEBUG_ACX, "acx cca threshold"); + + detection = kzalloc(sizeof(*detection), GFP_KERNEL); + if (!detection) { + ret = -ENOMEM; + goto out; + } + + detection->rx_cca_threshold = cpu_to_le16(wl->conf.rx.rx_cca_threshold); + detection->tx_energy_detection = wl->conf.tx.tx_energy_detection; + + ret = wl1271_cmd_configure(wl, ACX_CCA_THRESHOLD, + detection, sizeof(*detection)); + if (ret < 0) { + wl1271_warning("failed to set cca threshold: %d", ret); + return ret; + } + +out: + kfree(detection); + return ret; +} + +int wl1271_acx_bcn_dtim_options(struct wl1271 *wl) +{ + struct acx_beacon_broadcast *bb; + int ret; + + wl1271_debug(DEBUG_ACX, "acx bcn dtim options"); + + bb = kzalloc(sizeof(*bb), GFP_KERNEL); + if (!bb) { + ret = -ENOMEM; + goto out; + } + + bb->beacon_rx_timeout = cpu_to_le16(wl->conf.conn.beacon_rx_timeout); + bb->broadcast_timeout = cpu_to_le16(wl->conf.conn.broadcast_timeout); + bb->rx_broadcast_in_ps = wl->conf.conn.rx_broadcast_in_ps; + bb->ps_poll_threshold = wl->conf.conn.ps_poll_threshold; + + ret = wl1271_cmd_configure(wl, ACX_BCN_DTIM_OPTIONS, bb, sizeof(*bb)); + if (ret < 0) { + wl1271_warning("failed to set rx config: %d", ret); + goto out; + } + +out: + kfree(bb); + return ret; +} + +int wl1271_acx_aid(struct wl1271 *wl, u16 aid) +{ + struct acx_aid *acx_aid; + int ret; + + wl1271_debug(DEBUG_ACX, "acx aid"); + + acx_aid = kzalloc(sizeof(*acx_aid), GFP_KERNEL); + if (!acx_aid) { + ret = -ENOMEM; + goto out; + } + + acx_aid->aid = cpu_to_le16(aid); + + ret = wl1271_cmd_configure(wl, ACX_AID, acx_aid, sizeof(*acx_aid)); + if (ret < 0) { + wl1271_warning("failed to set aid: %d", ret); + goto out; + } + +out: + kfree(acx_aid); + return ret; +} + +int wl1271_acx_event_mbox_mask(struct wl1271 *wl, u32 event_mask) +{ + struct acx_event_mask *mask; + int ret; + + wl1271_debug(DEBUG_ACX, "acx event mbox mask"); + + mask = kzalloc(sizeof(*mask), GFP_KERNEL); + if (!mask) { + ret = -ENOMEM; + goto out; + } + + /* high event mask is unused */ + mask->high_event_mask = cpu_to_le32(0xffffffff); + mask->event_mask = cpu_to_le32(event_mask); + + ret = wl1271_cmd_configure(wl, ACX_EVENT_MBOX_MASK, + mask, sizeof(*mask)); + if (ret < 0) { + wl1271_warning("failed to set acx_event_mbox_mask: %d", ret); + goto out; + } + +out: + kfree(mask); + return ret; +} + +int wl1271_acx_set_preamble(struct wl1271 *wl, enum acx_preamble_type preamble) +{ + struct acx_preamble *acx; + int ret; + + wl1271_debug(DEBUG_ACX, "acx_set_preamble"); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + acx->preamble = preamble; + + ret = wl1271_cmd_configure(wl, ACX_PREAMBLE_TYPE, acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("Setting of preamble failed: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} + +int wl1271_acx_cts_protect(struct wl1271 *wl, + enum acx_ctsprotect_type ctsprotect) +{ + struct acx_ctsprotect *acx; + int ret; + + wl1271_debug(DEBUG_ACX, "acx_set_ctsprotect"); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + acx->ctsprotect = ctsprotect; + + ret = wl1271_cmd_configure(wl, ACX_CTS_PROTECTION, acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("Setting of ctsprotect failed: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} + +int wl1271_acx_statistics(struct wl1271 *wl, struct acx_statistics *stats) +{ + int ret; + + wl1271_debug(DEBUG_ACX, "acx statistics"); + + ret = wl1271_cmd_interrogate(wl, ACX_STATISTICS, stats, + sizeof(*stats)); + if (ret < 0) { + wl1271_warning("acx statistics failed: %d", ret); + return -ENOMEM; + } + + return 0; +} + +int wl1271_acx_rate_policies(struct wl1271 *wl) +{ + struct acx_rate_policy *acx; + struct conf_tx_rate_class *c = &wl->conf.tx.rc_conf; + int idx = 0; + int ret = 0; + + wl1271_debug(DEBUG_ACX, "acx rate policies"); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + + if (!acx) { + ret = -ENOMEM; + goto out; + } + + /* configure one basic rate class */ + idx = ACX_TX_BASIC_RATE; + acx->rate_class[idx].enabled_rates = cpu_to_le32(wl->basic_rate); + acx->rate_class[idx].short_retry_limit = c->short_retry_limit; + acx->rate_class[idx].long_retry_limit = c->long_retry_limit; + acx->rate_class[idx].aflags = c->aflags; + + /* configure one AP supported rate class */ + idx = ACX_TX_AP_FULL_RATE; + acx->rate_class[idx].enabled_rates = cpu_to_le32(wl->rate_set); + acx->rate_class[idx].short_retry_limit = c->short_retry_limit; + acx->rate_class[idx].long_retry_limit = c->long_retry_limit; + acx->rate_class[idx].aflags = c->aflags; + + acx->rate_class_cnt = cpu_to_le32(ACX_TX_RATE_POLICY_CNT); + + ret = wl1271_cmd_configure(wl, ACX_RATE_POLICY, acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("Setting of rate policies failed: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} + +int wl1271_acx_ac_cfg(struct wl1271 *wl, u8 ac, u8 cw_min, u16 cw_max, + u8 aifsn, u16 txop) +{ + struct acx_ac_cfg *acx; + int ret = 0; + + wl1271_debug(DEBUG_ACX, "acx ac cfg %d cw_ming %d cw_max %d " + "aifs %d txop %d", ac, cw_min, cw_max, aifsn, txop); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + + if (!acx) { + ret = -ENOMEM; + goto out; + } + + acx->ac = ac; + acx->cw_min = cw_min; + acx->cw_max = cpu_to_le16(cw_max); + acx->aifsn = aifsn; + acx->tx_op_limit = cpu_to_le16(txop); + + ret = wl1271_cmd_configure(wl, ACX_AC_CFG, acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("acx ac cfg failed: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} + +int wl1271_acx_tid_cfg(struct wl1271 *wl, u8 queue_id, u8 channel_type, + u8 tsid, u8 ps_scheme, u8 ack_policy, + u32 apsd_conf0, u32 apsd_conf1) +{ + struct acx_tid_config *acx; + int ret = 0; + + wl1271_debug(DEBUG_ACX, "acx tid config"); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + + if (!acx) { + ret = -ENOMEM; + goto out; + } + + acx->queue_id = queue_id; + acx->channel_type = channel_type; + acx->tsid = tsid; + acx->ps_scheme = ps_scheme; + acx->ack_policy = ack_policy; + acx->apsd_conf[0] = cpu_to_le32(apsd_conf0); + acx->apsd_conf[1] = cpu_to_le32(apsd_conf1); + + ret = wl1271_cmd_configure(wl, ACX_TID_CFG, acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("Setting of tid config failed: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} + +int wl1271_acx_frag_threshold(struct wl1271 *wl) +{ + struct acx_frag_threshold *acx; + int ret = 0; + + wl1271_debug(DEBUG_ACX, "acx frag threshold"); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + + if (!acx) { + ret = -ENOMEM; + goto out; + } + + acx->frag_threshold = cpu_to_le16(wl->conf.tx.frag_threshold); + ret = wl1271_cmd_configure(wl, ACX_FRAG_CFG, acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("Setting of frag threshold failed: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} + +int wl1271_acx_tx_config_options(struct wl1271 *wl) +{ + struct acx_tx_config_options *acx; + int ret = 0; + + wl1271_debug(DEBUG_ACX, "acx tx config options"); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + + if (!acx) { + ret = -ENOMEM; + goto out; + } + + acx->tx_compl_timeout = cpu_to_le16(wl->conf.tx.tx_compl_timeout); + acx->tx_compl_threshold = cpu_to_le16(wl->conf.tx.tx_compl_threshold); + ret = wl1271_cmd_configure(wl, ACX_TX_CONFIG_OPT, acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("Setting of tx options failed: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} + +int wl1271_acx_mem_cfg(struct wl1271 *wl) +{ + struct wl1271_acx_config_memory *mem_conf; + int ret; + + wl1271_debug(DEBUG_ACX, "wl1271 mem cfg"); + + mem_conf = kzalloc(sizeof(*mem_conf), GFP_KERNEL); + if (!mem_conf) { + ret = -ENOMEM; + goto out; + } + + /* memory config */ + mem_conf->num_stations = DEFAULT_NUM_STATIONS; + mem_conf->rx_mem_block_num = ACX_RX_MEM_BLOCKS; + mem_conf->tx_min_mem_block_num = ACX_TX_MIN_MEM_BLOCKS; + mem_conf->num_ssid_profiles = ACX_NUM_SSID_PROFILES; + mem_conf->total_tx_descriptors = cpu_to_le32(ACX_TX_DESCRIPTORS); + + ret = wl1271_cmd_configure(wl, ACX_MEM_CFG, mem_conf, + sizeof(*mem_conf)); + if (ret < 0) { + wl1271_warning("wl1271 mem config failed: %d", ret); + goto out; + } + +out: + kfree(mem_conf); + return ret; +} + +int wl1271_acx_init_mem_config(struct wl1271 *wl) +{ + int ret; + + ret = wl1271_acx_mem_cfg(wl); + if (ret < 0) + return ret; + + wl->target_mem_map = kzalloc(sizeof(struct wl1271_acx_mem_map), + GFP_KERNEL); + if (!wl->target_mem_map) { + wl1271_error("couldn't allocate target memory map"); + return -ENOMEM; + } + + /* we now ask for the firmware built memory map */ + ret = wl1271_acx_mem_map(wl, (void *)wl->target_mem_map, + sizeof(struct wl1271_acx_mem_map)); + if (ret < 0) { + wl1271_error("couldn't retrieve firmware memory map"); + kfree(wl->target_mem_map); + wl->target_mem_map = NULL; + return ret; + } + + /* initialize TX block book keeping */ + wl->tx_blocks_available = + le32_to_cpu(wl->target_mem_map->num_tx_mem_blocks); + wl1271_debug(DEBUG_TX, "available tx blocks: %d", + wl->tx_blocks_available); + + return 0; +} + +int wl1271_acx_init_rx_interrupt(struct wl1271 *wl) +{ + struct wl1271_acx_rx_config_opt *rx_conf; + int ret; + + wl1271_debug(DEBUG_ACX, "wl1271 rx interrupt config"); + + rx_conf = kzalloc(sizeof(*rx_conf), GFP_KERNEL); + if (!rx_conf) { + ret = -ENOMEM; + goto out; + } + + rx_conf->threshold = cpu_to_le16(wl->conf.rx.irq_pkt_threshold); + rx_conf->timeout = cpu_to_le16(wl->conf.rx.irq_timeout); + rx_conf->mblk_threshold = cpu_to_le16(wl->conf.rx.irq_blk_threshold); + rx_conf->queue_type = wl->conf.rx.queue_type; + + ret = wl1271_cmd_configure(wl, ACX_RX_CONFIG_OPT, rx_conf, + sizeof(*rx_conf)); + if (ret < 0) { + wl1271_warning("wl1271 rx config opt failed: %d", ret); + goto out; + } + +out: + kfree(rx_conf); + return ret; +} + +int wl1271_acx_bet_enable(struct wl1271 *wl, bool enable) +{ + struct wl1271_acx_bet_enable *acx = NULL; + int ret = 0; + + wl1271_debug(DEBUG_ACX, "acx bet enable"); + + if (enable && wl->conf.conn.bet_enable == CONF_BET_MODE_DISABLE) + goto out; + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + acx->enable = enable ? CONF_BET_MODE_ENABLE : CONF_BET_MODE_DISABLE; + acx->max_consecutive = wl->conf.conn.bet_max_consecutive; + + ret = wl1271_cmd_configure(wl, ACX_BET_ENABLE, acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("acx bet enable failed: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} + +int wl1271_acx_arp_ip_filter(struct wl1271 *wl, bool enable, __be32 address) +{ + struct wl1271_acx_arp_filter *acx; + int ret; + + wl1271_debug(DEBUG_ACX, "acx arp ip filter, enable: %d", enable); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + acx->version = ACX_IPV4_VERSION; + acx->enable = enable; + + if (enable == true) + memcpy(acx->address, &address, ACX_IPV4_ADDR_SIZE); + + ret = wl1271_cmd_configure(wl, ACX_ARP_IP_FILTER, + acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("failed to set arp ip filter: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} + +int wl1271_acx_pm_config(struct wl1271 *wl) +{ + struct wl1271_acx_pm_config *acx = NULL; + struct conf_pm_config_settings *c = &wl->conf.pm_config; + int ret = 0; + + wl1271_debug(DEBUG_ACX, "acx pm config"); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + acx->host_clk_settling_time = cpu_to_le32(c->host_clk_settling_time); + acx->host_fast_wakeup_support = c->host_fast_wakeup_support; + + ret = wl1271_cmd_configure(wl, ACX_PM_CONFIG, acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("acx pm config failed: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} + +int wl1271_acx_keep_alive_mode(struct wl1271 *wl, bool enable) +{ + struct wl1271_acx_keep_alive_mode *acx = NULL; + int ret = 0; + + wl1271_debug(DEBUG_ACX, "acx keep alive mode: %d", enable); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + acx->enabled = enable; + + ret = wl1271_cmd_configure(wl, ACX_KEEP_ALIVE_MODE, acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("acx keep alive mode failed: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} + +int wl1271_acx_keep_alive_config(struct wl1271 *wl, u8 index, u8 tpl_valid) +{ + struct wl1271_acx_keep_alive_config *acx = NULL; + int ret = 0; + + wl1271_debug(DEBUG_ACX, "acx keep alive config"); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + acx->period = cpu_to_le32(wl->conf.conn.keep_alive_interval); + acx->index = index; + acx->tpl_validation = tpl_valid; + acx->trigger = ACX_KEEP_ALIVE_NO_TX; + + ret = wl1271_cmd_configure(wl, ACX_SET_KEEP_ALIVE_CONFIG, + acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("acx keep alive config failed: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} + +int wl1271_acx_rssi_snr_trigger(struct wl1271 *wl, bool enable, + s16 thold, u8 hyst) +{ + struct wl1271_acx_rssi_snr_trigger *acx = NULL; + int ret = 0; + + wl1271_debug(DEBUG_ACX, "acx rssi snr trigger"); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + wl->last_rssi_event = -1; + + acx->pacing = cpu_to_le16(wl->conf.roam_trigger.trigger_pacing); + acx->metric = WL1271_ACX_TRIG_METRIC_RSSI_BEACON; + acx->type = WL1271_ACX_TRIG_TYPE_EDGE; + if (enable) + acx->enable = WL1271_ACX_TRIG_ENABLE; + else + acx->enable = WL1271_ACX_TRIG_DISABLE; + + acx->index = WL1271_ACX_TRIG_IDX_RSSI; + acx->dir = WL1271_ACX_TRIG_DIR_BIDIR; + acx->threshold = cpu_to_le16(thold); + acx->hysteresis = hyst; + + ret = wl1271_cmd_configure(wl, ACX_RSSI_SNR_TRIGGER, acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("acx rssi snr trigger setting failed: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} + +int wl1271_acx_rssi_snr_avg_weights(struct wl1271 *wl) +{ + struct wl1271_acx_rssi_snr_avg_weights *acx = NULL; + struct conf_roam_trigger_settings *c = &wl->conf.roam_trigger; + int ret = 0; + + wl1271_debug(DEBUG_ACX, "acx rssi snr avg weights"); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + acx->rssi_beacon = c->avg_weight_rssi_beacon; + acx->rssi_data = c->avg_weight_rssi_data; + acx->snr_beacon = c->avg_weight_snr_beacon; + acx->snr_data = c->avg_weight_snr_data; + + ret = wl1271_cmd_configure(wl, ACX_RSSI_SNR_WEIGHTS, acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("acx rssi snr trigger weights failed: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} + +int wl1271_acx_set_ht_capabilities(struct wl1271 *wl, + struct ieee80211_sta_ht_cap *ht_cap, + bool allow_ht_operation) +{ + struct wl1271_acx_ht_capabilities *acx; + u8 mac_address[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; + int ret = 0; + + wl1271_debug(DEBUG_ACX, "acx ht capabilities setting"); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + /* Allow HT Operation ? */ + if (allow_ht_operation) { + acx->ht_capabilites = + WL1271_ACX_FW_CAP_HT_OPERATION; + if (ht_cap->cap & IEEE80211_HT_CAP_GRN_FLD) + acx->ht_capabilites |= + WL1271_ACX_FW_CAP_GREENFIELD_FRAME_FORMAT; + if (ht_cap->cap & IEEE80211_HT_CAP_SGI_20) + acx->ht_capabilites |= + WL1271_ACX_FW_CAP_SHORT_GI_FOR_20MHZ_PACKETS; + if (ht_cap->cap & IEEE80211_HT_CAP_LSIG_TXOP_PROT) + acx->ht_capabilites |= + WL1271_ACX_FW_CAP_LSIG_TXOP_PROTECTION; + + /* get data from A-MPDU parameters field */ + acx->ampdu_max_length = ht_cap->ampdu_factor; + acx->ampdu_min_spacing = ht_cap->ampdu_density; + + memcpy(acx->mac_address, mac_address, ETH_ALEN); + } else { /* HT operations are not allowed */ + acx->ht_capabilites = 0; + } + + ret = wl1271_cmd_configure(wl, ACX_PEER_HT_CAP, acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("acx ht capabilities setting failed: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} + +int wl1271_acx_set_ht_information(struct wl1271 *wl, + u16 ht_operation_mode) +{ + struct wl1271_acx_ht_information *acx; + int ret = 0; + + wl1271_debug(DEBUG_ACX, "acx ht information setting"); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + acx->ht_protection = + (u8)(ht_operation_mode & IEEE80211_HT_OP_MODE_PROTECTION); + acx->rifs_mode = 0; + acx->gf_protection = 0; + acx->ht_tx_burst_limit = 0; + acx->dual_cts_protection = 0; + + ret = wl1271_cmd_configure(wl, ACX_HT_BSS_OPERATION, acx, sizeof(*acx)); + + if (ret < 0) { + wl1271_warning("acx ht information setting failed: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} + +int wl1271_acx_tsf_info(struct wl1271 *wl, u64 *mactime) +{ + struct wl1271_acx_fw_tsf_information *tsf_info; + int ret; + + tsf_info = kzalloc(sizeof(*tsf_info), GFP_KERNEL); + if (!tsf_info) { + ret = -ENOMEM; + goto out; + } + + ret = wl1271_cmd_interrogate(wl, ACX_TSF_INFO, + tsf_info, sizeof(*tsf_info)); + if (ret < 0) { + wl1271_warning("acx tsf info interrogate failed"); + goto out; + } + + *mactime = le32_to_cpu(tsf_info->current_tsf_low) | + ((u64) le32_to_cpu(tsf_info->current_tsf_high) << 32); + +out: + kfree(tsf_info); + return ret; +} diff --git a/drivers/net/wireless/wl12xx/acx.h b/drivers/net/wireless/wl12xx/acx.h new file mode 100644 index 00000000000..f41a9c1df12 --- /dev/null +++ b/drivers/net/wireless/wl12xx/acx.h @@ -0,0 +1,1185 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 1998-2009 Texas Instruments. All rights reserved. + * Copyright (C) 2008-2010 Nokia Corporation + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __ACX_H__ +#define __ACX_H__ + +#include "wl12xx.h" +#include "cmd.h" + +/************************************************************************* + + Host Interrupt Register (WiLink -> Host) + +**************************************************************************/ +/* HW Initiated interrupt Watchdog timer expiration */ +#define WL1271_ACX_INTR_WATCHDOG BIT(0) +/* Init sequence is done (masked interrupt, detection through polling only ) */ +#define WL1271_ACX_INTR_INIT_COMPLETE BIT(1) +/* Event was entered to Event MBOX #A*/ +#define WL1271_ACX_INTR_EVENT_A BIT(2) +/* Event was entered to Event MBOX #B*/ +#define WL1271_ACX_INTR_EVENT_B BIT(3) +/* Command processing completion*/ +#define WL1271_ACX_INTR_CMD_COMPLETE BIT(4) +/* Signaling the host on HW wakeup */ +#define WL1271_ACX_INTR_HW_AVAILABLE BIT(5) +/* The MISC bit is used for aggregation of RX, TxComplete and TX rate update */ +#define WL1271_ACX_INTR_DATA BIT(6) +/* Trace meassge on MBOX #A */ +#define WL1271_ACX_INTR_TRACE_A BIT(7) +/* Trace meassge on MBOX #B */ +#define WL1271_ACX_INTR_TRACE_B BIT(8) + +#define WL1271_ACX_INTR_ALL 0xFFFFFFFF +#define WL1271_ACX_ALL_EVENTS_VECTOR (WL1271_ACX_INTR_WATCHDOG | \ + WL1271_ACX_INTR_INIT_COMPLETE | \ + WL1271_ACX_INTR_EVENT_A | \ + WL1271_ACX_INTR_EVENT_B | \ + WL1271_ACX_INTR_CMD_COMPLETE | \ + WL1271_ACX_INTR_HW_AVAILABLE | \ + WL1271_ACX_INTR_DATA) + +#define WL1271_INTR_MASK (WL1271_ACX_INTR_WATCHDOG | \ + WL1271_ACX_INTR_EVENT_A | \ + WL1271_ACX_INTR_EVENT_B | \ + WL1271_ACX_INTR_HW_AVAILABLE | \ + WL1271_ACX_INTR_DATA) + +/* Target's information element */ +struct acx_header { + struct wl1271_cmd_header cmd; + + /* acx (or information element) header */ + __le16 id; + + /* payload length (not including headers */ + __le16 len; +} __packed; + +struct acx_error_counter { + struct acx_header header; + + /* The number of PLCP errors since the last time this */ + /* information element was interrogated. This field is */ + /* automatically cleared when it is interrogated.*/ + __le32 PLCP_error; + + /* The number of FCS errors since the last time this */ + /* information element was interrogated. This field is */ + /* automatically cleared when it is interrogated.*/ + __le32 FCS_error; + + /* The number of MPDUs without PLCP header errors received*/ + /* since the last time this information element was interrogated. */ + /* This field is automatically cleared when it is interrogated.*/ + __le32 valid_frame; + + /* the number of missed sequence numbers in the squentially */ + /* values of frames seq numbers */ + __le32 seq_num_miss; +} __packed; + +enum wl1271_psm_mode { + /* Active mode */ + WL1271_PSM_CAM = 0, + + /* Power save mode */ + WL1271_PSM_PS = 1, + + /* Extreme low power */ + WL1271_PSM_ELP = 2, +}; + +struct acx_sleep_auth { + struct acx_header header; + + /* The sleep level authorization of the device. */ + /* 0 - Always active*/ + /* 1 - Power down mode: light / fast sleep*/ + /* 2 - ELP mode: Deep / Max sleep*/ + u8 sleep_auth; + u8 padding[3]; +} __packed; + +enum { + HOSTIF_PCI_MASTER_HOST_INDIRECT, + HOSTIF_PCI_MASTER_HOST_DIRECT, + HOSTIF_SLAVE, + HOSTIF_PKT_RING, + HOSTIF_DONTCARE = 0xFF +}; + +#define DEFAULT_UCAST_PRIORITY 0 +#define DEFAULT_RX_Q_PRIORITY 0 +#define DEFAULT_NUM_STATIONS 1 +#define DEFAULT_RXQ_PRIORITY 0 /* low 0 .. 15 high */ +#define DEFAULT_RXQ_TYPE 0x07 /* All frames, Data/Ctrl/Mgmt */ +#define TRACE_BUFFER_MAX_SIZE 256 + +#define DP_RX_PACKET_RING_CHUNK_SIZE 1600 +#define DP_TX_PACKET_RING_CHUNK_SIZE 1600 +#define DP_RX_PACKET_RING_CHUNK_NUM 2 +#define DP_TX_PACKET_RING_CHUNK_NUM 2 +#define DP_TX_COMPLETE_TIME_OUT 20 + +#define TX_MSDU_LIFETIME_MIN 0 +#define TX_MSDU_LIFETIME_MAX 3000 +#define TX_MSDU_LIFETIME_DEF 512 +#define RX_MSDU_LIFETIME_MIN 0 +#define RX_MSDU_LIFETIME_MAX 0xFFFFFFFF +#define RX_MSDU_LIFETIME_DEF 512000 + +struct acx_rx_msdu_lifetime { + struct acx_header header; + + /* + * The maximum amount of time, in TU, before the + * firmware discards the MSDU. + */ + __le32 lifetime; +} __packed; + +/* + * RX Config Options Table + * Bit Definition + * === ========== + * 31:14 Reserved + * 13 Copy RX Status - when set, write three receive status words + * to top of rx'd MPDUs. + * When cleared, do not write three status words (added rev 1.5) + * 12 Reserved + * 11 RX Complete upon FCS error - when set, give rx complete + * interrupt for FCS errors, after the rx filtering, e.g. unicast + * frames not to us with FCS error will not generate an interrupt. + * 10 SSID Filter Enable - When set, the WiLink discards all beacon, + * probe request, and probe response frames with an SSID that does + * not match the SSID specified by the host in the START/JOIN + * command. + * When clear, the WiLink receives frames with any SSID. + * 9 Broadcast Filter Enable - When set, the WiLink discards all + * broadcast frames. When clear, the WiLink receives all received + * broadcast frames. + * 8:6 Reserved + * 5 BSSID Filter Enable - When set, the WiLink discards any frames + * with a BSSID that does not match the BSSID specified by the + * host. + * When clear, the WiLink receives frames from any BSSID. + * 4 MAC Addr Filter - When set, the WiLink discards any frames + * with a destination address that does not match the MAC address + * of the adaptor. + * When clear, the WiLink receives frames destined to any MAC + * address. + * 3 Promiscuous - When set, the WiLink receives all valid frames + * (i.e., all frames that pass the FCS check). + * When clear, only frames that pass the other filters specified + * are received. + * 2 FCS - When set, the WiLink includes the FCS with the received + * frame. + * When cleared, the FCS is discarded. + * 1 PLCP header - When set, write all data from baseband to frame + * buffer including PHY header. + * 0 Reserved - Always equal to 0. + * + * RX Filter Options Table + * Bit Definition + * === ========== + * 31:12 Reserved - Always equal to 0. + * 11 Association - When set, the WiLink receives all association + * related frames (association request/response, reassocation + * request/response, and disassociation). When clear, these frames + * are discarded. + * 10 Auth/De auth - When set, the WiLink receives all authentication + * and de-authentication frames. When clear, these frames are + * discarded. + * 9 Beacon - When set, the WiLink receives all beacon frames. + * When clear, these frames are discarded. + * 8 Contention Free - When set, the WiLink receives all contention + * free frames. + * When clear, these frames are discarded. + * 7 Control - When set, the WiLink receives all control frames. + * When clear, these frames are discarded. + * 6 Data - When set, the WiLink receives all data frames. + * When clear, these frames are discarded. + * 5 FCS Error - When set, the WiLink receives frames that have FCS + * errors. + * When clear, these frames are discarded. + * 4 Management - When set, the WiLink receives all management + * frames. + * When clear, these frames are discarded. + * 3 Probe Request - When set, the WiLink receives all probe request + * frames. + * When clear, these frames are discarded. + * 2 Probe Response - When set, the WiLink receives all probe + * response frames. + * When clear, these frames are discarded. + * 1 RTS/CTS/ACK - When set, the WiLink receives all RTS, CTS and ACK + * frames. + * When clear, these frames are discarded. + * 0 Rsvd Type/Sub Type - When set, the WiLink receives all frames + * that have reserved frame types and sub types as defined by the + * 802.11 specification. + * When clear, these frames are discarded. + */ +struct acx_rx_config { + struct acx_header header; + + __le32 config_options; + __le32 filter_options; +} __packed; + +struct acx_packet_detection { + struct acx_header header; + + __le32 threshold; +} __packed; + + +enum acx_slot_type { + SLOT_TIME_LONG = 0, + SLOT_TIME_SHORT = 1, + DEFAULT_SLOT_TIME = SLOT_TIME_SHORT, + MAX_SLOT_TIMES = 0xFF +}; + +#define STATION_WONE_INDEX 0 + +struct acx_slot { + struct acx_header header; + + u8 wone_index; /* Reserved */ + u8 slot_time; + u8 reserved[6]; +} __packed; + + +#define ACX_MC_ADDRESS_GROUP_MAX (8) +#define ADDRESS_GROUP_MAX_LEN (ETH_ALEN * ACX_MC_ADDRESS_GROUP_MAX) + +struct acx_dot11_grp_addr_tbl { + struct acx_header header; + + u8 enabled; + u8 num_groups; + u8 pad[2]; + u8 mac_table[ADDRESS_GROUP_MAX_LEN]; +} __packed; + +struct acx_rx_timeout { + struct acx_header header; + + __le16 ps_poll_timeout; + __le16 upsd_timeout; +} __packed; + +struct acx_rts_threshold { + struct acx_header header; + + __le16 threshold; + u8 pad[2]; +} __packed; + +struct acx_beacon_filter_option { + struct acx_header header; + + u8 enable; + + /* + * The number of beacons without the unicast TIM + * bit set that the firmware buffers before + * signaling the host about ready frames. + * When set to 0 and the filter is enabled, beacons + * without the unicast TIM bit set are dropped. + */ + u8 max_num_beacons; + u8 pad[2]; +} __packed; + +/* + * ACXBeaconFilterEntry (not 221) + * Byte Offset Size (Bytes) Definition + * =========== ============ ========== + * 0 1 IE identifier + * 1 1 Treatment bit mask + * + * ACXBeaconFilterEntry (221) + * Byte Offset Size (Bytes) Definition + * =========== ============ ========== + * 0 1 IE identifier + * 1 1 Treatment bit mask + * 2 3 OUI + * 5 1 Type + * 6 2 Version + * + * + * Treatment bit mask - The information element handling: + * bit 0 - The information element is compared and transferred + * in case of change. + * bit 1 - The information element is transferred to the host + * with each appearance or disappearance. + * Note that both bits can be set at the same time. + */ +#define BEACON_FILTER_TABLE_MAX_IE_NUM (32) +#define BEACON_FILTER_TABLE_MAX_VENDOR_SPECIFIC_IE_NUM (6) +#define BEACON_FILTER_TABLE_IE_ENTRY_SIZE (2) +#define BEACON_FILTER_TABLE_EXTRA_VENDOR_SPECIFIC_IE_SIZE (6) +#define BEACON_FILTER_TABLE_MAX_SIZE ((BEACON_FILTER_TABLE_MAX_IE_NUM * \ + BEACON_FILTER_TABLE_IE_ENTRY_SIZE) + \ + (BEACON_FILTER_TABLE_MAX_VENDOR_SPECIFIC_IE_NUM * \ + BEACON_FILTER_TABLE_EXTRA_VENDOR_SPECIFIC_IE_SIZE)) + +struct acx_beacon_filter_ie_table { + struct acx_header header; + + u8 num_ie; + u8 pad[3]; + u8 table[BEACON_FILTER_TABLE_MAX_SIZE]; +} __packed; + +struct acx_conn_monit_params { + struct acx_header header; + + __le32 synch_fail_thold; /* number of beacons missed */ + __le32 bss_lose_timeout; /* number of TU's from synch fail */ +} __packed; + +struct acx_bt_wlan_coex { + struct acx_header header; + + u8 enable; + u8 pad[3]; +} __packed; + +struct acx_bt_wlan_coex_param { + struct acx_header header; + + __le32 params[CONF_SG_PARAMS_MAX]; + u8 param_idx; + u8 padding[3]; +} __packed; + +struct acx_dco_itrim_params { + struct acx_header header; + + u8 enable; + u8 padding[3]; + __le32 timeout; +} __packed; + +struct acx_energy_detection { + struct acx_header header; + + /* The RX Clear Channel Assessment threshold in the PHY */ + __le16 rx_cca_threshold; + u8 tx_energy_detection; + u8 pad; +} __packed; + +struct acx_beacon_broadcast { + struct acx_header header; + + __le16 beacon_rx_timeout; + __le16 broadcast_timeout; + + /* Enables receiving of broadcast packets in PS mode */ + u8 rx_broadcast_in_ps; + + /* Consecutive PS Poll failures before updating the host */ + u8 ps_poll_threshold; + u8 pad[2]; +} __packed; + +struct acx_event_mask { + struct acx_header header; + + __le32 event_mask; + __le32 high_event_mask; /* Unused */ +} __packed; + +#define CFG_RX_FCS BIT(2) +#define CFG_RX_ALL_GOOD BIT(3) +#define CFG_UNI_FILTER_EN BIT(4) +#define CFG_BSSID_FILTER_EN BIT(5) +#define CFG_MC_FILTER_EN BIT(6) +#define CFG_MC_ADDR0_EN BIT(7) +#define CFG_MC_ADDR1_EN BIT(8) +#define CFG_BC_REJECT_EN BIT(9) +#define CFG_SSID_FILTER_EN BIT(10) +#define CFG_RX_INT_FCS_ERROR BIT(11) +#define CFG_RX_INT_ENCRYPTED BIT(12) +#define CFG_RX_WR_RX_STATUS BIT(13) +#define CFG_RX_FILTER_NULTI BIT(14) +#define CFG_RX_RESERVE BIT(15) +#define CFG_RX_TIMESTAMP_TSF BIT(16) + +#define CFG_RX_RSV_EN BIT(0) +#define CFG_RX_RCTS_ACK BIT(1) +#define CFG_RX_PRSP_EN BIT(2) +#define CFG_RX_PREQ_EN BIT(3) +#define CFG_RX_MGMT_EN BIT(4) +#define CFG_RX_FCS_ERROR BIT(5) +#define CFG_RX_DATA_EN BIT(6) +#define CFG_RX_CTL_EN BIT(7) +#define CFG_RX_CF_EN BIT(8) +#define CFG_RX_BCN_EN BIT(9) +#define CFG_RX_AUTH_EN BIT(10) +#define CFG_RX_ASSOC_EN BIT(11) + +#define SCAN_PASSIVE BIT(0) +#define SCAN_5GHZ_BAND BIT(1) +#define SCAN_TRIGGERED BIT(2) +#define SCAN_PRIORITY_HIGH BIT(3) + +/* When set, disable HW encryption */ +#define DF_ENCRYPTION_DISABLE 0x01 +#define DF_SNIFF_MODE_ENABLE 0x80 + +struct acx_feature_config { + struct acx_header header; + + __le32 options; + __le32 data_flow_options; +} __packed; + +struct acx_current_tx_power { + struct acx_header header; + + u8 current_tx_power; + u8 padding[3]; +} __packed; + +struct acx_wake_up_condition { + struct acx_header header; + + u8 wake_up_event; /* Only one bit can be set */ + u8 listen_interval; + u8 pad[2]; +} __packed; + +struct acx_aid { + struct acx_header header; + + /* + * To be set when associated with an AP. + */ + __le16 aid; + u8 pad[2]; +} __packed; + +enum acx_preamble_type { + ACX_PREAMBLE_LONG = 0, + ACX_PREAMBLE_SHORT = 1 +}; + +struct acx_preamble { + struct acx_header header; + + /* + * When set, the WiLink transmits the frames with a short preamble and + * when cleared, the WiLink transmits the frames with a long preamble. + */ + u8 preamble; + u8 padding[3]; +} __packed; + +enum acx_ctsprotect_type { + CTSPROTECT_DISABLE = 0, + CTSPROTECT_ENABLE = 1 +}; + +struct acx_ctsprotect { + struct acx_header header; + u8 ctsprotect; + u8 padding[3]; +} __packed; + +struct acx_tx_statistics { + __le32 internal_desc_overflow; +} __packed; + +struct acx_rx_statistics { + __le32 out_of_mem; + __le32 hdr_overflow; + __le32 hw_stuck; + __le32 dropped; + __le32 fcs_err; + __le32 xfr_hint_trig; + __le32 path_reset; + __le32 reset_counter; +} __packed; + +struct acx_dma_statistics { + __le32 rx_requested; + __le32 rx_errors; + __le32 tx_requested; + __le32 tx_errors; +} __packed; + +struct acx_isr_statistics { + /* host command complete */ + __le32 cmd_cmplt; + + /* fiqisr() */ + __le32 fiqs; + + /* (INT_STS_ND & INT_TRIG_RX_HEADER) */ + __le32 rx_headers; + + /* (INT_STS_ND & INT_TRIG_RX_CMPLT) */ + __le32 rx_completes; + + /* (INT_STS_ND & INT_TRIG_NO_RX_BUF) */ + __le32 rx_mem_overflow; + + /* (INT_STS_ND & INT_TRIG_S_RX_RDY) */ + __le32 rx_rdys; + + /* irqisr() */ + __le32 irqs; + + /* (INT_STS_ND & INT_TRIG_TX_PROC) */ + __le32 tx_procs; + + /* (INT_STS_ND & INT_TRIG_DECRYPT_DONE) */ + __le32 decrypt_done; + + /* (INT_STS_ND & INT_TRIG_DMA0) */ + __le32 dma0_done; + + /* (INT_STS_ND & INT_TRIG_DMA1) */ + __le32 dma1_done; + + /* (INT_STS_ND & INT_TRIG_TX_EXC_CMPLT) */ + __le32 tx_exch_complete; + + /* (INT_STS_ND & INT_TRIG_COMMAND) */ + __le32 commands; + + /* (INT_STS_ND & INT_TRIG_RX_PROC) */ + __le32 rx_procs; + + /* (INT_STS_ND & INT_TRIG_PM_802) */ + __le32 hw_pm_mode_changes; + + /* (INT_STS_ND & INT_TRIG_ACKNOWLEDGE) */ + __le32 host_acknowledges; + + /* (INT_STS_ND & INT_TRIG_PM_PCI) */ + __le32 pci_pm; + + /* (INT_STS_ND & INT_TRIG_ACM_WAKEUP) */ + __le32 wakeups; + + /* (INT_STS_ND & INT_TRIG_LOW_RSSI) */ + __le32 low_rssi; +} __packed; + +struct acx_wep_statistics { + /* WEP address keys configured */ + __le32 addr_key_count; + + /* default keys configured */ + __le32 default_key_count; + + __le32 reserved; + + /* number of times that WEP key not found on lookup */ + __le32 key_not_found; + + /* number of times that WEP key decryption failed */ + __le32 decrypt_fail; + + /* WEP packets decrypted */ + __le32 packets; + + /* WEP decrypt interrupts */ + __le32 interrupt; +} __packed; + +#define ACX_MISSED_BEACONS_SPREAD 10 + +struct acx_pwr_statistics { + /* the amount of enters into power save mode (both PD & ELP) */ + __le32 ps_enter; + + /* the amount of enters into ELP mode */ + __le32 elp_enter; + + /* the amount of missing beacon interrupts to the host */ + __le32 missing_bcns; + + /* the amount of wake on host-access times */ + __le32 wake_on_host; + + /* the amount of wake on timer-expire */ + __le32 wake_on_timer_exp; + + /* the number of packets that were transmitted with PS bit set */ + __le32 tx_with_ps; + + /* the number of packets that were transmitted with PS bit clear */ + __le32 tx_without_ps; + + /* the number of received beacons */ + __le32 rcvd_beacons; + + /* the number of entering into PowerOn (power save off) */ + __le32 power_save_off; + + /* the number of entries into power save mode */ + __le16 enable_ps; + + /* + * the number of exits from power save, not including failed PS + * transitions + */ + __le16 disable_ps; + + /* + * the number of times the TSF counter was adjusted because + * of drift + */ + __le32 fix_tsf_ps; + + /* Gives statistics about the spread continuous missed beacons. + * The 16 LSB are dedicated for the PS mode. + * The 16 MSB are dedicated for the PS mode. + * cont_miss_bcns_spread[0] - single missed beacon. + * cont_miss_bcns_spread[1] - two continuous missed beacons. + * cont_miss_bcns_spread[2] - three continuous missed beacons. + * ... + * cont_miss_bcns_spread[9] - ten and more continuous missed beacons. + */ + __le32 cont_miss_bcns_spread[ACX_MISSED_BEACONS_SPREAD]; + + /* the number of beacons in awake mode */ + __le32 rcvd_awake_beacons; +} __packed; + +struct acx_mic_statistics { + __le32 rx_pkts; + __le32 calc_failure; +} __packed; + +struct acx_aes_statistics { + __le32 encrypt_fail; + __le32 decrypt_fail; + __le32 encrypt_packets; + __le32 decrypt_packets; + __le32 encrypt_interrupt; + __le32 decrypt_interrupt; +} __packed; + +struct acx_event_statistics { + __le32 heart_beat; + __le32 calibration; + __le32 rx_mismatch; + __le32 rx_mem_empty; + __le32 rx_pool; + __le32 oom_late; + __le32 phy_transmit_error; + __le32 tx_stuck; +} __packed; + +struct acx_ps_statistics { + __le32 pspoll_timeouts; + __le32 upsd_timeouts; + __le32 upsd_max_sptime; + __le32 upsd_max_apturn; + __le32 pspoll_max_apturn; + __le32 pspoll_utilization; + __le32 upsd_utilization; +} __packed; + +struct acx_rxpipe_statistics { + __le32 rx_prep_beacon_drop; + __le32 descr_host_int_trig_rx_data; + __le32 beacon_buffer_thres_host_int_trig_rx_data; + __le32 missed_beacon_host_int_trig_rx_data; + __le32 tx_xfr_host_int_trig_rx_data; +} __packed; + +struct acx_statistics { + struct acx_header header; + + struct acx_tx_statistics tx; + struct acx_rx_statistics rx; + struct acx_dma_statistics dma; + struct acx_isr_statistics isr; + struct acx_wep_statistics wep; + struct acx_pwr_statistics pwr; + struct acx_aes_statistics aes; + struct acx_mic_statistics mic; + struct acx_event_statistics event; + struct acx_ps_statistics ps; + struct acx_rxpipe_statistics rxpipe; +} __packed; + +struct acx_rate_class { + __le32 enabled_rates; + u8 short_retry_limit; + u8 long_retry_limit; + u8 aflags; + u8 reserved; +}; + +#define ACX_TX_BASIC_RATE 0 +#define ACX_TX_AP_FULL_RATE 1 +#define ACX_TX_RATE_POLICY_CNT 2 +struct acx_rate_policy { + struct acx_header header; + + __le32 rate_class_cnt; + struct acx_rate_class rate_class[CONF_TX_MAX_RATE_CLASSES]; +} __packed; + +struct acx_ac_cfg { + struct acx_header header; + u8 ac; + u8 cw_min; + __le16 cw_max; + u8 aifsn; + u8 reserved; + __le16 tx_op_limit; +} __packed; + +struct acx_tid_config { + struct acx_header header; + u8 queue_id; + u8 channel_type; + u8 tsid; + u8 ps_scheme; + u8 ack_policy; + u8 padding[3]; + __le32 apsd_conf[2]; +} __packed; + +struct acx_frag_threshold { + struct acx_header header; + __le16 frag_threshold; + u8 padding[2]; +} __packed; + +struct acx_tx_config_options { + struct acx_header header; + __le16 tx_compl_timeout; /* msec */ + __le16 tx_compl_threshold; /* number of packets */ +} __packed; + +#define ACX_RX_MEM_BLOCKS 70 +#define ACX_TX_MIN_MEM_BLOCKS 40 +#define ACX_TX_DESCRIPTORS 32 +#define ACX_NUM_SSID_PROFILES 1 + +struct wl1271_acx_config_memory { + struct acx_header header; + + u8 rx_mem_block_num; + u8 tx_min_mem_block_num; + u8 num_stations; + u8 num_ssid_profiles; + __le32 total_tx_descriptors; +} __packed; + +struct wl1271_acx_mem_map { + struct acx_header header; + + __le32 code_start; + __le32 code_end; + + __le32 wep_defkey_start; + __le32 wep_defkey_end; + + __le32 sta_table_start; + __le32 sta_table_end; + + __le32 packet_template_start; + __le32 packet_template_end; + + /* Address of the TX result interface (control block) */ + __le32 tx_result; + __le32 tx_result_queue_start; + + __le32 queue_memory_start; + __le32 queue_memory_end; + + __le32 packet_memory_pool_start; + __le32 packet_memory_pool_end; + + __le32 debug_buffer1_start; + __le32 debug_buffer1_end; + + __le32 debug_buffer2_start; + __le32 debug_buffer2_end; + + /* Number of blocks FW allocated for TX packets */ + __le32 num_tx_mem_blocks; + + /* Number of blocks FW allocated for RX packets */ + __le32 num_rx_mem_blocks; + + /* the following 4 fields are valid in SLAVE mode only */ + u8 *tx_cbuf; + u8 *rx_cbuf; + __le32 rx_ctrl; + __le32 tx_ctrl; +} __packed; + +struct wl1271_acx_rx_config_opt { + struct acx_header header; + + __le16 mblk_threshold; + __le16 threshold; + __le16 timeout; + u8 queue_type; + u8 reserved; +} __packed; + + +struct wl1271_acx_bet_enable { + struct acx_header header; + + u8 enable; + u8 max_consecutive; + u8 padding[2]; +} __packed; + +#define ACX_IPV4_VERSION 4 +#define ACX_IPV6_VERSION 6 +#define ACX_IPV4_ADDR_SIZE 4 +struct wl1271_acx_arp_filter { + struct acx_header header; + u8 version; /* ACX_IPV4_VERSION, ACX_IPV6_VERSION */ + u8 enable; /* 1 to enable ARP filtering, 0 to disable */ + u8 padding[2]; + u8 address[16]; /* The configured device IP address - all ARP + requests directed to this IP address will pass + through. For IPv4, the first four bytes are + used. */ +} __packed; + +struct wl1271_acx_pm_config { + struct acx_header header; + + __le32 host_clk_settling_time; + u8 host_fast_wakeup_support; + u8 padding[3]; +} __packed; + +struct wl1271_acx_keep_alive_mode { + struct acx_header header; + + u8 enabled; + u8 padding[3]; +} __packed; + +enum { + ACX_KEEP_ALIVE_NO_TX = 0, + ACX_KEEP_ALIVE_PERIOD_ONLY +}; + +enum { + ACX_KEEP_ALIVE_TPL_INVALID = 0, + ACX_KEEP_ALIVE_TPL_VALID +}; + +struct wl1271_acx_keep_alive_config { + struct acx_header header; + + __le32 period; + u8 index; + u8 tpl_validation; + u8 trigger; + u8 padding; +} __packed; + +enum { + WL1271_ACX_TRIG_TYPE_LEVEL = 0, + WL1271_ACX_TRIG_TYPE_EDGE, +}; + +enum { + WL1271_ACX_TRIG_DIR_LOW = 0, + WL1271_ACX_TRIG_DIR_HIGH, + WL1271_ACX_TRIG_DIR_BIDIR, +}; + +enum { + WL1271_ACX_TRIG_ENABLE = 1, + WL1271_ACX_TRIG_DISABLE, +}; + +enum { + WL1271_ACX_TRIG_METRIC_RSSI_BEACON = 0, + WL1271_ACX_TRIG_METRIC_RSSI_DATA, + WL1271_ACX_TRIG_METRIC_SNR_BEACON, + WL1271_ACX_TRIG_METRIC_SNR_DATA, +}; + +enum { + WL1271_ACX_TRIG_IDX_RSSI = 0, + WL1271_ACX_TRIG_COUNT = 8, +}; + +struct wl1271_acx_rssi_snr_trigger { + struct acx_header header; + + __le16 threshold; + __le16 pacing; /* 0 - 60000 ms */ + u8 metric; + u8 type; + u8 dir; + u8 hysteresis; + u8 index; + u8 enable; + u8 padding[2]; +}; + +struct wl1271_acx_rssi_snr_avg_weights { + struct acx_header header; + + u8 rssi_beacon; + u8 rssi_data; + u8 snr_beacon; + u8 snr_data; +}; + +/* + * ACX_PEER_HT_CAP + * Configure HT capabilities - declare the capabilities of the peer + * we are connected to. + */ +struct wl1271_acx_ht_capabilities { + struct acx_header header; + + /* + * bit 0 - Allow HT Operation + * bit 1 - Allow Greenfield format in TX + * bit 2 - Allow Short GI in TX + * bit 3 - Allow L-SIG TXOP Protection in TX + * bit 4 - Allow HT Control fields in TX. + * Note, driver will still leave space for HT control in packets + * regardless of the value of this field. FW will be responsible + * to drop the HT field from any frame when this Bit set to 0. + * bit 5 - Allow RD initiation in TXOP. FW is allowed to initate RD. + * Exact policy setting for this feature is TBD. + * Note, this bit can only be set to 1 if bit 3 is set to 1. + */ + __le32 ht_capabilites; + + /* + * Indicates to which peer these capabilities apply. + * For infrastructure use ff:ff:ff:ff:ff:ff that indicates relevance + * for all peers. + * Only valid for IBSS/DLS operation. + */ + u8 mac_address[ETH_ALEN]; + + /* + * This the maximum A-MPDU length supported by the AP. The FW may not + * exceed this length when sending A-MPDUs + */ + u8 ampdu_max_length; + + /* This is the minimal spacing required when sending A-MPDUs to the AP*/ + u8 ampdu_min_spacing; +} __packed; + +/* HT Capabilites Fw Bit Mask Mapping */ +#define WL1271_ACX_FW_CAP_HT_OPERATION BIT(0) +#define WL1271_ACX_FW_CAP_GREENFIELD_FRAME_FORMAT BIT(1) +#define WL1271_ACX_FW_CAP_SHORT_GI_FOR_20MHZ_PACKETS BIT(2) +#define WL1271_ACX_FW_CAP_LSIG_TXOP_PROTECTION BIT(3) +#define WL1271_ACX_FW_CAP_HT_CONTROL_FIELDS BIT(4) +#define WL1271_ACX_FW_CAP_RD_INITIATION BIT(5) + + +/* + * ACX_HT_BSS_OPERATION + * Configure HT capabilities - AP rules for behavior in the BSS. + */ +struct wl1271_acx_ht_information { + struct acx_header header; + + /* Values: 0 - RIFS not allowed, 1 - RIFS allowed */ + u8 rifs_mode; + + /* Values: 0 - 3 like in spec */ + u8 ht_protection; + + /* Values: 0 - GF protection not required, 1 - GF protection required */ + u8 gf_protection; + + /*Values: 0 - TX Burst limit not required, 1 - TX Burst Limit required*/ + u8 ht_tx_burst_limit; + + /* + * Values: 0 - Dual CTS protection not required, + * 1 - Dual CTS Protection required + * Note: When this value is set to 1 FW will protect all TXOP with RTS + * frame and will not use CTS-to-self regardless of the value of the + * ACX_CTS_PROTECTION information element + */ + u8 dual_cts_protection; + + u8 padding[3]; +} __packed; + +struct wl1271_acx_fw_tsf_information { + struct acx_header header; + + __le32 current_tsf_high; + __le32 current_tsf_low; + __le32 last_bttt_high; + __le32 last_tbtt_low; + u8 last_dtim_count; + u8 padding[3]; +} __packed; + +enum { + ACX_WAKE_UP_CONDITIONS = 0x0002, + ACX_MEM_CFG = 0x0003, + ACX_SLOT = 0x0004, + ACX_AC_CFG = 0x0007, + ACX_MEM_MAP = 0x0008, + ACX_AID = 0x000A, + /* ACX_FW_REV is missing in the ref driver, but seems to work */ + ACX_FW_REV = 0x000D, + ACX_MEDIUM_USAGE = 0x000F, + ACX_RX_CFG = 0x0010, + ACX_TX_QUEUE_CFG = 0x0011, /* FIXME: only used by wl1251 */ + ACX_STATISTICS = 0x0013, /* Debug API */ + ACX_PWR_CONSUMPTION_STATISTICS = 0x0014, + ACX_FEATURE_CFG = 0x0015, + ACX_TID_CFG = 0x001A, + ACX_PS_RX_STREAMING = 0x001B, + ACX_BEACON_FILTER_OPT = 0x001F, + ACX_NOISE_HIST = 0x0021, + ACX_HDK_VERSION = 0x0022, /* ??? */ + ACX_PD_THRESHOLD = 0x0023, + ACX_TX_CONFIG_OPT = 0x0024, + ACX_CCA_THRESHOLD = 0x0025, + ACX_EVENT_MBOX_MASK = 0x0026, + ACX_CONN_MONIT_PARAMS = 0x002D, + ACX_CONS_TX_FAILURE = 0x002F, + ACX_BCN_DTIM_OPTIONS = 0x0031, + ACX_SG_ENABLE = 0x0032, + ACX_SG_CFG = 0x0033, + ACX_BEACON_FILTER_TABLE = 0x0038, + ACX_ARP_IP_FILTER = 0x0039, + ACX_ROAMING_STATISTICS_TBL = 0x003B, + ACX_RATE_POLICY = 0x003D, + ACX_CTS_PROTECTION = 0x003E, + ACX_SLEEP_AUTH = 0x003F, + ACX_PREAMBLE_TYPE = 0x0040, + ACX_ERROR_CNT = 0x0041, + ACX_IBSS_FILTER = 0x0044, + ACX_SERVICE_PERIOD_TIMEOUT = 0x0045, + ACX_TSF_INFO = 0x0046, + ACX_CONFIG_PS_WMM = 0x0049, + ACX_ENABLE_RX_DATA_FILTER = 0x004A, + ACX_SET_RX_DATA_FILTER = 0x004B, + ACX_GET_DATA_FILTER_STATISTICS = 0x004C, + ACX_RX_CONFIG_OPT = 0x004E, + ACX_FRAG_CFG = 0x004F, + ACX_BET_ENABLE = 0x0050, + ACX_RSSI_SNR_TRIGGER = 0x0051, + ACX_RSSI_SNR_WEIGHTS = 0x0052, + ACX_KEEP_ALIVE_MODE = 0x0053, + ACX_SET_KEEP_ALIVE_CONFIG = 0x0054, + ACX_BA_SESSION_RESPONDER_POLICY = 0x0055, + ACX_BA_SESSION_INITIATOR_POLICY = 0x0056, + ACX_PEER_HT_CAP = 0x0057, + ACX_HT_BSS_OPERATION = 0x0058, + ACX_COEX_ACTIVITY = 0x0059, + ACX_SET_DCO_ITRIM_PARAMS = 0x0061, + DOT11_RX_MSDU_LIFE_TIME = 0x1004, + DOT11_CUR_TX_PWR = 0x100D, + DOT11_RX_DOT11_MODE = 0x1012, + DOT11_RTS_THRESHOLD = 0x1013, + DOT11_GROUP_ADDRESS_TBL = 0x1014, + ACX_PM_CONFIG = 0x1016, + + MAX_DOT11_IE = DOT11_GROUP_ADDRESS_TBL, + + MAX_IE = 0xFFFF +}; + + +int wl1271_acx_wake_up_conditions(struct wl1271 *wl); +int wl1271_acx_sleep_auth(struct wl1271 *wl, u8 sleep_auth); +int wl1271_acx_tx_power(struct wl1271 *wl, int power); +int wl1271_acx_feature_cfg(struct wl1271 *wl); +int wl1271_acx_mem_map(struct wl1271 *wl, + struct acx_header *mem_map, size_t len); +int wl1271_acx_rx_msdu_life_time(struct wl1271 *wl); +int wl1271_acx_rx_config(struct wl1271 *wl, u32 config, u32 filter); +int wl1271_acx_pd_threshold(struct wl1271 *wl); +int wl1271_acx_slot(struct wl1271 *wl, enum acx_slot_type slot_time); +int wl1271_acx_group_address_tbl(struct wl1271 *wl, bool enable, + void *mc_list, u32 mc_list_len); +int wl1271_acx_service_period_timeout(struct wl1271 *wl); +int wl1271_acx_rts_threshold(struct wl1271 *wl, u16 rts_threshold); +int wl1271_acx_dco_itrim_params(struct wl1271 *wl); +int wl1271_acx_beacon_filter_opt(struct wl1271 *wl, bool enable_filter); +int wl1271_acx_beacon_filter_table(struct wl1271 *wl); +int wl1271_acx_conn_monit_params(struct wl1271 *wl, bool enable); +int wl1271_acx_sg_enable(struct wl1271 *wl, bool enable); +int wl1271_acx_sg_cfg(struct wl1271 *wl); +int wl1271_acx_cca_threshold(struct wl1271 *wl); +int wl1271_acx_bcn_dtim_options(struct wl1271 *wl); +int wl1271_acx_aid(struct wl1271 *wl, u16 aid); +int wl1271_acx_event_mbox_mask(struct wl1271 *wl, u32 event_mask); +int wl1271_acx_set_preamble(struct wl1271 *wl, enum acx_preamble_type preamble); +int wl1271_acx_cts_protect(struct wl1271 *wl, + enum acx_ctsprotect_type ctsprotect); +int wl1271_acx_statistics(struct wl1271 *wl, struct acx_statistics *stats); +int wl1271_acx_rate_policies(struct wl1271 *wl); +int wl1271_acx_ac_cfg(struct wl1271 *wl, u8 ac, u8 cw_min, u16 cw_max, + u8 aifsn, u16 txop); +int wl1271_acx_tid_cfg(struct wl1271 *wl, u8 queue_id, u8 channel_type, + u8 tsid, u8 ps_scheme, u8 ack_policy, + u32 apsd_conf0, u32 apsd_conf1); +int wl1271_acx_frag_threshold(struct wl1271 *wl); +int wl1271_acx_tx_config_options(struct wl1271 *wl); +int wl1271_acx_mem_cfg(struct wl1271 *wl); +int wl1271_acx_init_mem_config(struct wl1271 *wl); +int wl1271_acx_init_rx_interrupt(struct wl1271 *wl); +int wl1271_acx_smart_reflex(struct wl1271 *wl); +int wl1271_acx_bet_enable(struct wl1271 *wl, bool enable); +int wl1271_acx_arp_ip_filter(struct wl1271 *wl, bool enable, __be32 address); +int wl1271_acx_pm_config(struct wl1271 *wl); +int wl1271_acx_keep_alive_mode(struct wl1271 *wl, bool enable); +int wl1271_acx_keep_alive_config(struct wl1271 *wl, u8 index, u8 tpl_valid); +int wl1271_acx_rssi_snr_trigger(struct wl1271 *wl, bool enable, + s16 thold, u8 hyst); +int wl1271_acx_rssi_snr_avg_weights(struct wl1271 *wl); +int wl1271_acx_set_ht_capabilities(struct wl1271 *wl, + struct ieee80211_sta_ht_cap *ht_cap, + bool allow_ht_operation); +int wl1271_acx_set_ht_information(struct wl1271 *wl, + u16 ht_operation_mode); +int wl1271_acx_tsf_info(struct wl1271 *wl, u64 *mactime); + +#endif /* __WL1271_ACX_H__ */ diff --git a/drivers/net/wireless/wl12xx/boot.c b/drivers/net/wireless/wl12xx/boot.c new file mode 100644 index 00000000000..1eafb817583 --- /dev/null +++ b/drivers/net/wireless/wl12xx/boot.c @@ -0,0 +1,591 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 2008-2010 Nokia Corporation + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include + +#include "acx.h" +#include "reg.h" +#include "boot.h" +#include "io.h" +#include "event.h" + +static struct wl1271_partition_set part_table[PART_TABLE_LEN] = { + [PART_DOWN] = { + .mem = { + .start = 0x00000000, + .size = 0x000177c0 + }, + .reg = { + .start = REGISTERS_BASE, + .size = 0x00008800 + }, + .mem2 = { + .start = 0x00000000, + .size = 0x00000000 + }, + .mem3 = { + .start = 0x00000000, + .size = 0x00000000 + }, + }, + + [PART_WORK] = { + .mem = { + .start = 0x00040000, + .size = 0x00014fc0 + }, + .reg = { + .start = REGISTERS_BASE, + .size = 0x0000a000 + }, + .mem2 = { + .start = 0x003004f8, + .size = 0x00000004 + }, + .mem3 = { + .start = 0x00040404, + .size = 0x00000000 + }, + }, + + [PART_DRPW] = { + .mem = { + .start = 0x00040000, + .size = 0x00014fc0 + }, + .reg = { + .start = DRPW_BASE, + .size = 0x00006000 + }, + .mem2 = { + .start = 0x00000000, + .size = 0x00000000 + }, + .mem3 = { + .start = 0x00000000, + .size = 0x00000000 + } + } +}; + +static void wl1271_boot_set_ecpu_ctrl(struct wl1271 *wl, u32 flag) +{ + u32 cpu_ctrl; + + /* 10.5.0 run the firmware (I) */ + cpu_ctrl = wl1271_read32(wl, ACX_REG_ECPU_CONTROL); + + /* 10.5.1 run the firmware (II) */ + cpu_ctrl |= flag; + wl1271_write32(wl, ACX_REG_ECPU_CONTROL, cpu_ctrl); +} + +static void wl1271_boot_fw_version(struct wl1271 *wl) +{ + struct wl1271_static_data static_data; + + wl1271_read(wl, wl->cmd_box_addr, &static_data, sizeof(static_data), + false); + + strncpy(wl->chip.fw_ver, static_data.fw_version, + sizeof(wl->chip.fw_ver)); + + /* make sure the string is NULL-terminated */ + wl->chip.fw_ver[sizeof(wl->chip.fw_ver) - 1] = '\0'; +} + +static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf, + size_t fw_data_len, u32 dest) +{ + struct wl1271_partition_set partition; + int addr, chunk_num, partition_limit; + u8 *p, *chunk; + + /* whal_FwCtrl_LoadFwImageSm() */ + + wl1271_debug(DEBUG_BOOT, "starting firmware upload"); + + wl1271_debug(DEBUG_BOOT, "fw_data_len %zd chunk_size %d", + fw_data_len, CHUNK_SIZE); + + if ((fw_data_len % 4) != 0) { + wl1271_error("firmware length not multiple of four"); + return -EIO; + } + + chunk = kmalloc(CHUNK_SIZE, GFP_KERNEL); + if (!chunk) { + wl1271_error("allocation for firmware upload chunk failed"); + return -ENOMEM; + } + + memcpy(&partition, &part_table[PART_DOWN], sizeof(partition)); + partition.mem.start = dest; + wl1271_set_partition(wl, &partition); + + /* 10.1 set partition limit and chunk num */ + chunk_num = 0; + partition_limit = part_table[PART_DOWN].mem.size; + + while (chunk_num < fw_data_len / CHUNK_SIZE) { + /* 10.2 update partition, if needed */ + addr = dest + (chunk_num + 2) * CHUNK_SIZE; + if (addr > partition_limit) { + addr = dest + chunk_num * CHUNK_SIZE; + partition_limit = chunk_num * CHUNK_SIZE + + part_table[PART_DOWN].mem.size; + partition.mem.start = addr; + wl1271_set_partition(wl, &partition); + } + + /* 10.3 upload the chunk */ + addr = dest + chunk_num * CHUNK_SIZE; + p = buf + chunk_num * CHUNK_SIZE; + memcpy(chunk, p, CHUNK_SIZE); + wl1271_debug(DEBUG_BOOT, "uploading fw chunk 0x%p to 0x%x", + p, addr); + wl1271_write(wl, addr, chunk, CHUNK_SIZE, false); + + chunk_num++; + } + + /* 10.4 upload the last chunk */ + addr = dest + chunk_num * CHUNK_SIZE; + p = buf + chunk_num * CHUNK_SIZE; + memcpy(chunk, p, fw_data_len % CHUNK_SIZE); + wl1271_debug(DEBUG_BOOT, "uploading fw last chunk (%zd B) 0x%p to 0x%x", + fw_data_len % CHUNK_SIZE, p, addr); + wl1271_write(wl, addr, chunk, fw_data_len % CHUNK_SIZE, false); + + kfree(chunk); + return 0; +} + +static int wl1271_boot_upload_firmware(struct wl1271 *wl) +{ + u32 chunks, addr, len; + int ret = 0; + u8 *fw; + + fw = wl->fw; + chunks = be32_to_cpup((__be32 *) fw); + fw += sizeof(u32); + + wl1271_debug(DEBUG_BOOT, "firmware chunks to be uploaded: %u", chunks); + + while (chunks--) { + addr = be32_to_cpup((__be32 *) fw); + fw += sizeof(u32); + len = be32_to_cpup((__be32 *) fw); + fw += sizeof(u32); + + if (len > 300000) { + wl1271_info("firmware chunk too long: %u", len); + return -EINVAL; + } + wl1271_debug(DEBUG_BOOT, "chunk %d addr 0x%x len %u", + chunks, addr, len); + ret = wl1271_boot_upload_firmware_chunk(wl, fw, len, addr); + if (ret != 0) + break; + fw += len; + } + + return ret; +} + +static int wl1271_boot_upload_nvs(struct wl1271 *wl) +{ + size_t nvs_len, burst_len; + int i; + u32 dest_addr, val; + u8 *nvs_ptr, *nvs_aligned; + + if (wl->nvs == NULL) + return -ENODEV; + + /* + * FIXME: the LEGACY NVS image support (NVS's missing the 5GHz band + * configurations) can be removed when those NVS files stop floating + * around. + */ + if (wl->nvs_len == sizeof(struct wl1271_nvs_file) || + wl->nvs_len == WL1271_INI_LEGACY_NVS_FILE_SIZE) { + if (wl->nvs->general_params.dual_mode_select) + wl->enable_11a = true; + } + + if (wl->nvs_len != sizeof(struct wl1271_nvs_file) && + (wl->nvs_len != WL1271_INI_LEGACY_NVS_FILE_SIZE || + wl->enable_11a)) { + wl1271_error("nvs size is not as expected: %zu != %zu", + wl->nvs_len, sizeof(struct wl1271_nvs_file)); + kfree(wl->nvs); + wl->nvs = NULL; + wl->nvs_len = 0; + return -EILSEQ; + } + + /* only the first part of the NVS needs to be uploaded */ + nvs_len = sizeof(wl->nvs->nvs); + nvs_ptr = (u8 *)wl->nvs->nvs; + + /* update current MAC address to NVS */ + nvs_ptr[11] = wl->mac_addr[0]; + nvs_ptr[10] = wl->mac_addr[1]; + nvs_ptr[6] = wl->mac_addr[2]; + nvs_ptr[5] = wl->mac_addr[3]; + nvs_ptr[4] = wl->mac_addr[4]; + nvs_ptr[3] = wl->mac_addr[5]; + + /* + * Layout before the actual NVS tables: + * 1 byte : burst length. + * 2 bytes: destination address. + * n bytes: data to burst copy. + * + * This is ended by a 0 length, then the NVS tables. + */ + + /* FIXME: Do we need to check here whether the LSB is 1? */ + while (nvs_ptr[0]) { + burst_len = nvs_ptr[0]; + dest_addr = (nvs_ptr[1] & 0xfe) | ((u32)(nvs_ptr[2] << 8)); + + /* + * Due to our new wl1271_translate_reg_addr function, + * we need to add the REGISTER_BASE to the destination + */ + dest_addr += REGISTERS_BASE; + + /* We move our pointer to the data */ + nvs_ptr += 3; + + for (i = 0; i < burst_len; i++) { + val = (nvs_ptr[0] | (nvs_ptr[1] << 8) + | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24)); + + wl1271_debug(DEBUG_BOOT, + "nvs burst write 0x%x: 0x%x", + dest_addr, val); + wl1271_write32(wl, dest_addr, val); + + nvs_ptr += 4; + dest_addr += 4; + } + } + + /* + * We've reached the first zero length, the first NVS table + * is located at an aligned offset which is at least 7 bytes further. + */ + nvs_ptr = (u8 *)wl->nvs->nvs + + ALIGN(nvs_ptr - (u8 *)wl->nvs->nvs + 7, 4); + nvs_len -= nvs_ptr - (u8 *)wl->nvs->nvs; + + /* Now we must set the partition correctly */ + wl1271_set_partition(wl, &part_table[PART_WORK]); + + /* Copy the NVS tables to a new block to ensure alignment */ + nvs_aligned = kmemdup(nvs_ptr, nvs_len, GFP_KERNEL); + if (!nvs_aligned) + return -ENOMEM; + + /* And finally we upload the NVS tables */ + wl1271_write(wl, CMD_MBOX_ADDRESS, nvs_aligned, nvs_len, false); + + kfree(nvs_aligned); + return 0; +} + +static void wl1271_boot_enable_interrupts(struct wl1271 *wl) +{ + wl1271_enable_interrupts(wl); + wl1271_write32(wl, ACX_REG_INTERRUPT_MASK, + WL1271_ACX_INTR_ALL & ~(WL1271_INTR_MASK)); + wl1271_write32(wl, HI_CFG, HI_CFG_DEF_VAL); +} + +static int wl1271_boot_soft_reset(struct wl1271 *wl) +{ + unsigned long timeout; + u32 boot_data; + + /* perform soft reset */ + wl1271_write32(wl, ACX_REG_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT); + + /* SOFT_RESET is self clearing */ + timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME); + while (1) { + boot_data = wl1271_read32(wl, ACX_REG_SLV_SOFT_RESET); + wl1271_debug(DEBUG_BOOT, "soft reset bootdata 0x%x", boot_data); + if ((boot_data & ACX_SLV_SOFT_RESET_BIT) == 0) + break; + + if (time_after(jiffies, timeout)) { + /* 1.2 check pWhalBus->uSelfClearTime if the + * timeout was reached */ + wl1271_error("soft reset timeout"); + return -1; + } + + udelay(SOFT_RESET_STALL_TIME); + } + + /* disable Rx/Tx */ + wl1271_write32(wl, ENABLE, 0x0); + + /* disable auto calibration on start*/ + wl1271_write32(wl, SPARE_A2, 0xffff); + + return 0; +} + +static int wl1271_boot_run_firmware(struct wl1271 *wl) +{ + int loop, ret; + u32 chip_id, intr; + + wl1271_boot_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT); + + chip_id = wl1271_read32(wl, CHIP_ID_B); + + wl1271_debug(DEBUG_BOOT, "chip id after firmware boot: 0x%x", chip_id); + + if (chip_id != wl->chip.id) { + wl1271_error("chip id doesn't match after firmware boot"); + return -EIO; + } + + /* wait for init to complete */ + loop = 0; + while (loop++ < INIT_LOOP) { + udelay(INIT_LOOP_DELAY); + intr = wl1271_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); + + if (intr == 0xffffffff) { + wl1271_error("error reading hardware complete " + "init indication"); + return -EIO; + } + /* check that ACX_INTR_INIT_COMPLETE is enabled */ + else if (intr & WL1271_ACX_INTR_INIT_COMPLETE) { + wl1271_write32(wl, ACX_REG_INTERRUPT_ACK, + WL1271_ACX_INTR_INIT_COMPLETE); + break; + } + } + + if (loop > INIT_LOOP) { + wl1271_error("timeout waiting for the hardware to " + "complete initialization"); + return -EIO; + } + + /* get hardware config command mail box */ + wl->cmd_box_addr = wl1271_read32(wl, REG_COMMAND_MAILBOX_PTR); + + /* get hardware config event mail box */ + wl->event_box_addr = wl1271_read32(wl, REG_EVENT_MAILBOX_PTR); + + /* set the working partition to its "running" mode offset */ + wl1271_set_partition(wl, &part_table[PART_WORK]); + + wl1271_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x event_box_addr 0x%x", + wl->cmd_box_addr, wl->event_box_addr); + + wl1271_boot_fw_version(wl); + + /* + * in case of full asynchronous mode the firmware event must be + * ready to receive event from the command mailbox + */ + + /* unmask required mbox events */ + wl->event_mask = BSS_LOSE_EVENT_ID | + SCAN_COMPLETE_EVENT_ID | + PS_REPORT_EVENT_ID | + JOIN_EVENT_COMPLETE_ID | + DISCONNECT_EVENT_COMPLETE_ID | + RSSI_SNR_TRIGGER_0_EVENT_ID | + PSPOLL_DELIVERY_FAILURE_EVENT_ID | + SOFT_GEMINI_SENSE_EVENT_ID; + + ret = wl1271_event_unmask(wl); + if (ret < 0) { + wl1271_error("EVENT mask setting failed"); + return ret; + } + + wl1271_event_mbox_config(wl); + + /* firmware startup completed */ + return 0; +} + +static int wl1271_boot_write_irq_polarity(struct wl1271 *wl) +{ + u32 polarity; + + polarity = wl1271_top_reg_read(wl, OCP_REG_POLARITY); + + /* We use HIGH polarity, so unset the LOW bit */ + polarity &= ~POLARITY_LOW; + wl1271_top_reg_write(wl, OCP_REG_POLARITY, polarity); + + return 0; +} + +static void wl1271_boot_hw_version(struct wl1271 *wl) +{ + u32 fuse; + + fuse = wl1271_top_reg_read(wl, REG_FUSE_DATA_2_1); + fuse = (fuse & PG_VER_MASK) >> PG_VER_OFFSET; + + wl->hw_pg_ver = (s8)fuse; +} + +int wl1271_boot(struct wl1271 *wl) +{ + int ret = 0; + u32 tmp, clk, pause; + + wl1271_boot_hw_version(wl); + + if (wl->ref_clock == 0 || wl->ref_clock == 2 || wl->ref_clock == 4) + /* ref clk: 19.2/38.4/38.4-XTAL */ + clk = 0x3; + else if (wl->ref_clock == 1 || wl->ref_clock == 3) + /* ref clk: 26/52 */ + clk = 0x5; + else + return -EINVAL; + + if (wl->ref_clock != 0) { + u16 val; + /* Set clock type (open drain) */ + val = wl1271_top_reg_read(wl, OCP_REG_CLK_TYPE); + val &= FREF_CLK_TYPE_BITS; + wl1271_top_reg_write(wl, OCP_REG_CLK_TYPE, val); + + /* Set clock pull mode (no pull) */ + val = wl1271_top_reg_read(wl, OCP_REG_CLK_PULL); + val |= NO_PULL; + wl1271_top_reg_write(wl, OCP_REG_CLK_PULL, val); + } else { + u16 val; + /* Set clock polarity */ + val = wl1271_top_reg_read(wl, OCP_REG_CLK_POLARITY); + val &= FREF_CLK_POLARITY_BITS; + val |= CLK_REQ_OUTN_SEL; + wl1271_top_reg_write(wl, OCP_REG_CLK_POLARITY, val); + } + + wl1271_write32(wl, PLL_PARAMETERS, clk); + + pause = wl1271_read32(wl, PLL_PARAMETERS); + + wl1271_debug(DEBUG_BOOT, "pause1 0x%x", pause); + + pause &= ~(WU_COUNTER_PAUSE_VAL); + pause |= WU_COUNTER_PAUSE_VAL; + wl1271_write32(wl, WU_COUNTER_PAUSE, pause); + + /* Continue the ELP wake up sequence */ + wl1271_write32(wl, WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL); + udelay(500); + + wl1271_set_partition(wl, &part_table[PART_DRPW]); + + /* Read-modify-write DRPW_SCRATCH_START register (see next state) + to be used by DRPw FW. The RTRIM value will be added by the FW + before taking DRPw out of reset */ + + wl1271_debug(DEBUG_BOOT, "DRPW_SCRATCH_START %08x", DRPW_SCRATCH_START); + clk = wl1271_read32(wl, DRPW_SCRATCH_START); + + wl1271_debug(DEBUG_BOOT, "clk2 0x%x", clk); + + clk |= (wl->ref_clock << 1) << 4; + wl1271_write32(wl, DRPW_SCRATCH_START, clk); + + wl1271_set_partition(wl, &part_table[PART_WORK]); + + /* Disable interrupts */ + wl1271_write32(wl, ACX_REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL); + + ret = wl1271_boot_soft_reset(wl); + if (ret < 0) + goto out; + + /* 2. start processing NVS file */ + ret = wl1271_boot_upload_nvs(wl); + if (ret < 0) + goto out; + + /* write firmware's last address (ie. it's length) to + * ACX_EEPROMLESS_IND_REG */ + wl1271_debug(DEBUG_BOOT, "ACX_EEPROMLESS_IND_REG"); + + wl1271_write32(wl, ACX_EEPROMLESS_IND_REG, ACX_EEPROMLESS_IND_REG); + + tmp = wl1271_read32(wl, CHIP_ID_B); + + wl1271_debug(DEBUG_BOOT, "chip id 0x%x", tmp); + + /* 6. read the EEPROM parameters */ + tmp = wl1271_read32(wl, SCR_PAD2); + + ret = wl1271_boot_write_irq_polarity(wl); + if (ret < 0) + goto out; + + wl1271_write32(wl, ACX_REG_INTERRUPT_MASK, + WL1271_ACX_ALL_EVENTS_VECTOR); + + /* WL1271: The reference driver skips steps 7 to 10 (jumps directly + * to upload_fw) */ + + ret = wl1271_boot_upload_firmware(wl); + if (ret < 0) + goto out; + + /* 10.5 start firmware */ + ret = wl1271_boot_run_firmware(wl); + if (ret < 0) + goto out; + + /* Enable firmware interrupts now */ + wl1271_boot_enable_interrupts(wl); + + /* set the wl1271 default filters */ + wl->rx_config = WL1271_DEFAULT_RX_CONFIG; + wl->rx_filter = WL1271_DEFAULT_RX_FILTER; + + wl1271_event_mbox_config(wl); + +out: + return ret; +} diff --git a/drivers/net/wireless/wl12xx/boot.h b/drivers/net/wireless/wl12xx/boot.h new file mode 100644 index 00000000000..c7d771959f3 --- /dev/null +++ b/drivers/net/wireless/wl12xx/boot.h @@ -0,0 +1,71 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __BOOT_H__ +#define __BOOT_H__ + +#include "wl12xx.h" + +int wl1271_boot(struct wl1271 *wl); + +#define WL1271_NO_SUBBANDS 8 +#define WL1271_NO_POWER_LEVELS 4 +#define WL1271_FW_VERSION_MAX_LEN 20 + +struct wl1271_static_data { + u8 mac_address[ETH_ALEN]; + u8 padding[2]; + u8 fw_version[WL1271_FW_VERSION_MAX_LEN]; + u32 hw_version; + u8 tx_power_table[WL1271_NO_SUBBANDS][WL1271_NO_POWER_LEVELS]; +}; + +/* number of times we try to read the INIT interrupt */ +#define INIT_LOOP 20000 + +/* delay between retries */ +#define INIT_LOOP_DELAY 50 + +#define WU_COUNTER_PAUSE_VAL 0x3FF +#define WELP_ARM_COMMAND_VAL 0x4 + +#define OCP_REG_POLARITY 0x0064 +#define OCP_REG_CLK_TYPE 0x0448 +#define OCP_REG_CLK_POLARITY 0x0cb2 +#define OCP_REG_CLK_PULL 0x0cb4 + +#define REG_FUSE_DATA_2_1 0x050a +#define PG_VER_MASK 0x3c +#define PG_VER_OFFSET 2 + +#define CMD_MBOX_ADDRESS 0x407B4 + +#define POLARITY_LOW BIT(1) +#define NO_PULL (BIT(14) | BIT(15)) + +#define FREF_CLK_TYPE_BITS 0xfffffe7f +#define CLK_REQ_PRCM 0x100 +#define FREF_CLK_POLARITY_BITS 0xfffff8ff +#define CLK_REQ_OUTN_SEL 0x700 + +#endif diff --git a/drivers/net/wireless/wl12xx/cmd.c b/drivers/net/wireless/wl12xx/cmd.c new file mode 100644 index 00000000000..f3d0541aaad --- /dev/null +++ b/drivers/net/wireless/wl12xx/cmd.c @@ -0,0 +1,783 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 2009-2010 Nokia Corporation + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "wl12xx.h" +#include "reg.h" +#include "io.h" +#include "acx.h" +#include "wl12xx_80211.h" +#include "cmd.h" +#include "event.h" + +#define WL1271_CMD_FAST_POLL_COUNT 50 + +/* + * send command to firmware + * + * @wl: wl struct + * @id: command id + * @buf: buffer containing the command, must work with dma + * @len: length of the buffer + */ +int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len, + size_t res_len) +{ + struct wl1271_cmd_header *cmd; + unsigned long timeout; + u32 intr; + int ret = 0; + u16 status; + u16 poll_count = 0; + + cmd = buf; + cmd->id = cpu_to_le16(id); + cmd->status = 0; + + WARN_ON(len % 4 != 0); + + wl1271_write(wl, wl->cmd_box_addr, buf, len, false); + + wl1271_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD); + + timeout = jiffies + msecs_to_jiffies(WL1271_COMMAND_TIMEOUT); + + intr = wl1271_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); + while (!(intr & WL1271_ACX_INTR_CMD_COMPLETE)) { + if (time_after(jiffies, timeout)) { + wl1271_error("command complete timeout"); + ret = -ETIMEDOUT; + goto out; + } + + poll_count++; + if (poll_count < WL1271_CMD_FAST_POLL_COUNT) + udelay(10); + else + msleep(1); + + intr = wl1271_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); + } + + /* read back the status code of the command */ + if (res_len == 0) + res_len = sizeof(struct wl1271_cmd_header); + wl1271_read(wl, wl->cmd_box_addr, cmd, res_len, false); + + status = le16_to_cpu(cmd->status); + if (status != CMD_STATUS_SUCCESS) { + wl1271_error("command execute failure %d", status); + ieee80211_queue_work(wl->hw, &wl->recovery_work); + ret = -EIO; + } + + wl1271_write32(wl, ACX_REG_INTERRUPT_ACK, + WL1271_ACX_INTR_CMD_COMPLETE); + +out: + return ret; +} + +int wl1271_cmd_general_parms(struct wl1271 *wl) +{ + struct wl1271_general_parms_cmd *gen_parms; + struct wl1271_ini_general_params *gp = &wl->nvs->general_params; + bool answer = false; + int ret; + + if (!wl->nvs) + return -ENODEV; + + gen_parms = kzalloc(sizeof(*gen_parms), GFP_KERNEL); + if (!gen_parms) + return -ENOMEM; + + gen_parms->test.id = TEST_CMD_INI_FILE_GENERAL_PARAM; + + memcpy(&gen_parms->general_params, gp, sizeof(*gp)); + + if (gp->tx_bip_fem_auto_detect) + answer = true; + + ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), answer); + if (ret < 0) { + wl1271_warning("CMD_INI_FILE_GENERAL_PARAM failed"); + goto out; + } + + gp->tx_bip_fem_manufacturer = + gen_parms->general_params.tx_bip_fem_manufacturer; + + wl1271_debug(DEBUG_CMD, "FEM autodetect: %s, manufacturer: %d\n", + answer ? "auto" : "manual", gp->tx_bip_fem_manufacturer); + +out: + kfree(gen_parms); + return ret; +} + +int wl1271_cmd_radio_parms(struct wl1271 *wl) +{ + struct wl1271_radio_parms_cmd *radio_parms; + struct wl1271_ini_general_params *gp = &wl->nvs->general_params; + int ret; + + if (!wl->nvs) + return -ENODEV; + + radio_parms = kzalloc(sizeof(*radio_parms), GFP_KERNEL); + if (!radio_parms) + return -ENOMEM; + + radio_parms->test.id = TEST_CMD_INI_FILE_RADIO_PARAM; + + /* 2.4GHz parameters */ + memcpy(&radio_parms->static_params_2, &wl->nvs->stat_radio_params_2, + sizeof(struct wl1271_ini_band_params_2)); + memcpy(&radio_parms->dyn_params_2, + &wl->nvs->dyn_radio_params_2[gp->tx_bip_fem_manufacturer].params, + sizeof(struct wl1271_ini_fem_params_2)); + + /* 5GHz parameters */ + memcpy(&radio_parms->static_params_5, + &wl->nvs->stat_radio_params_5, + sizeof(struct wl1271_ini_band_params_5)); + memcpy(&radio_parms->dyn_params_5, + &wl->nvs->dyn_radio_params_5[gp->tx_bip_fem_manufacturer].params, + sizeof(struct wl1271_ini_fem_params_5)); + + wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_RADIO_PARAM: ", + radio_parms, sizeof(*radio_parms)); + + ret = wl1271_cmd_test(wl, radio_parms, sizeof(*radio_parms), 0); + if (ret < 0) + wl1271_warning("CMD_INI_FILE_RADIO_PARAM failed"); + + kfree(radio_parms); + return ret; +} + +int wl1271_cmd_ext_radio_parms(struct wl1271 *wl) +{ + struct wl1271_ext_radio_parms_cmd *ext_radio_parms; + struct conf_rf_settings *rf = &wl->conf.rf; + int ret; + + if (!wl->nvs) + return -ENODEV; + + ext_radio_parms = kzalloc(sizeof(*ext_radio_parms), GFP_KERNEL); + if (!ext_radio_parms) + return -ENOMEM; + + ext_radio_parms->test.id = TEST_CMD_INI_FILE_RF_EXTENDED_PARAM; + + memcpy(ext_radio_parms->tx_per_channel_power_compensation_2, + rf->tx_per_channel_power_compensation_2, + CONF_TX_PWR_COMPENSATION_LEN_2); + memcpy(ext_radio_parms->tx_per_channel_power_compensation_5, + rf->tx_per_channel_power_compensation_5, + CONF_TX_PWR_COMPENSATION_LEN_5); + + wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_EXT_RADIO_PARAM: ", + ext_radio_parms, sizeof(*ext_radio_parms)); + + ret = wl1271_cmd_test(wl, ext_radio_parms, sizeof(*ext_radio_parms), 0); + if (ret < 0) + wl1271_warning("TEST_CMD_INI_FILE_RF_EXTENDED_PARAM failed"); + + kfree(ext_radio_parms); + return ret; +} + +/* + * Poll the mailbox event field until any of the bits in the mask is set or a + * timeout occurs (WL1271_EVENT_TIMEOUT in msecs) + */ +static int wl1271_cmd_wait_for_event(struct wl1271 *wl, u32 mask) +{ + u32 events_vector, event; + unsigned long timeout; + + timeout = jiffies + msecs_to_jiffies(WL1271_EVENT_TIMEOUT); + + do { + if (time_after(jiffies, timeout)) { + ieee80211_queue_work(wl->hw, &wl->recovery_work); + return -ETIMEDOUT; + } + + msleep(1); + + /* read from both event fields */ + wl1271_read(wl, wl->mbox_ptr[0], &events_vector, + sizeof(events_vector), false); + event = events_vector & mask; + wl1271_read(wl, wl->mbox_ptr[1], &events_vector, + sizeof(events_vector), false); + event |= events_vector & mask; + } while (!event); + + return 0; +} + +int wl1271_cmd_join(struct wl1271 *wl, u8 bss_type) +{ + struct wl1271_cmd_join *join; + int ret, i; + u8 *bssid; + + join = kzalloc(sizeof(*join), GFP_KERNEL); + if (!join) { + ret = -ENOMEM; + goto out; + } + + wl1271_debug(DEBUG_CMD, "cmd join"); + + /* Reverse order BSSID */ + bssid = (u8 *) &join->bssid_lsb; + for (i = 0; i < ETH_ALEN; i++) + bssid[i] = wl->bssid[ETH_ALEN - i - 1]; + + join->rx_config_options = cpu_to_le32(wl->rx_config); + join->rx_filter_options = cpu_to_le32(wl->rx_filter); + join->bss_type = bss_type; + join->basic_rate_set = cpu_to_le32(wl->basic_rate_set); + + if (wl->band == IEEE80211_BAND_5GHZ) + join->bss_type |= WL1271_JOIN_CMD_BSS_TYPE_5GHZ; + + join->beacon_interval = cpu_to_le16(wl->beacon_int); + join->dtim_interval = WL1271_DEFAULT_DTIM_PERIOD; + + join->channel = wl->channel; + join->ssid_len = wl->ssid_len; + memcpy(join->ssid, wl->ssid, wl->ssid_len); + + join->ctrl |= wl->session_counter << WL1271_JOIN_CMD_TX_SESSION_OFFSET; + + /* reset TX security counters */ + wl->tx_security_last_seq = 0; + wl->tx_security_seq = 0; + + ret = wl1271_cmd_send(wl, CMD_START_JOIN, join, sizeof(*join), 0); + if (ret < 0) { + wl1271_error("failed to initiate cmd join"); + goto out_free; + } + + ret = wl1271_cmd_wait_for_event(wl, JOIN_EVENT_COMPLETE_ID); + if (ret < 0) + wl1271_error("cmd join event completion error"); + +out_free: + kfree(join); + +out: + return ret; +} + +/** + * send test command to firmware + * + * @wl: wl struct + * @buf: buffer containing the command, with all headers, must work with dma + * @len: length of the buffer + * @answer: is answer needed + */ +int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer) +{ + int ret; + size_t res_len = 0; + + wl1271_debug(DEBUG_CMD, "cmd test"); + + if (answer) + res_len = buf_len; + + ret = wl1271_cmd_send(wl, CMD_TEST, buf, buf_len, res_len); + + if (ret < 0) { + wl1271_warning("TEST command failed"); + return ret; + } + + return ret; +} + +/** + * read acx from firmware + * + * @wl: wl struct + * @id: acx id + * @buf: buffer for the response, including all headers, must work with dma + * @len: lenght of buf + */ +int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len) +{ + struct acx_header *acx = buf; + int ret; + + wl1271_debug(DEBUG_CMD, "cmd interrogate"); + + acx->id = cpu_to_le16(id); + + /* payload length, does not include any headers */ + acx->len = cpu_to_le16(len - sizeof(*acx)); + + ret = wl1271_cmd_send(wl, CMD_INTERROGATE, acx, sizeof(*acx), len); + if (ret < 0) + wl1271_error("INTERROGATE command failed"); + + return ret; +} + +/** + * write acx value to firmware + * + * @wl: wl struct + * @id: acx id + * @buf: buffer containing acx, including all headers, must work with dma + * @len: length of buf + */ +int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len) +{ + struct acx_header *acx = buf; + int ret; + + wl1271_debug(DEBUG_CMD, "cmd configure"); + + acx->id = cpu_to_le16(id); + + /* payload length, does not include any headers */ + acx->len = cpu_to_le16(len - sizeof(*acx)); + + ret = wl1271_cmd_send(wl, CMD_CONFIGURE, acx, len, 0); + if (ret < 0) { + wl1271_warning("CONFIGURE command NOK"); + return ret; + } + + return 0; +} + +int wl1271_cmd_data_path(struct wl1271 *wl, bool enable) +{ + struct cmd_enabledisable_path *cmd; + int ret; + u16 cmd_rx, cmd_tx; + + wl1271_debug(DEBUG_CMD, "cmd data path"); + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) { + ret = -ENOMEM; + goto out; + } + + /* the channel here is only used for calibration, so hardcoded to 1 */ + cmd->channel = 1; + + if (enable) { + cmd_rx = CMD_ENABLE_RX; + cmd_tx = CMD_ENABLE_TX; + } else { + cmd_rx = CMD_DISABLE_RX; + cmd_tx = CMD_DISABLE_TX; + } + + ret = wl1271_cmd_send(wl, cmd_rx, cmd, sizeof(*cmd), 0); + if (ret < 0) { + wl1271_error("rx %s cmd for channel %d failed", + enable ? "start" : "stop", cmd->channel); + goto out; + } + + wl1271_debug(DEBUG_BOOT, "rx %s cmd channel %d", + enable ? "start" : "stop", cmd->channel); + + ret = wl1271_cmd_send(wl, cmd_tx, cmd, sizeof(*cmd), 0); + if (ret < 0) { + wl1271_error("tx %s cmd for channel %d failed", + enable ? "start" : "stop", cmd->channel); + goto out; + } + + wl1271_debug(DEBUG_BOOT, "tx %s cmd channel %d", + enable ? "start" : "stop", cmd->channel); + +out: + kfree(cmd); + return ret; +} + +int wl1271_cmd_ps_mode(struct wl1271 *wl, u8 ps_mode, u32 rates, bool send) +{ + struct wl1271_cmd_ps_params *ps_params = NULL; + int ret = 0; + + wl1271_debug(DEBUG_CMD, "cmd set ps mode"); + + ps_params = kzalloc(sizeof(*ps_params), GFP_KERNEL); + if (!ps_params) { + ret = -ENOMEM; + goto out; + } + + ps_params->ps_mode = ps_mode; + ps_params->send_null_data = send; + ps_params->retries = wl->conf.conn.psm_entry_nullfunc_retries; + ps_params->hang_over_period = wl->conf.conn.psm_entry_hangover_period; + ps_params->null_data_rate = cpu_to_le32(rates); + + ret = wl1271_cmd_send(wl, CMD_SET_PS_MODE, ps_params, + sizeof(*ps_params), 0); + if (ret < 0) { + wl1271_error("cmd set_ps_mode failed"); + goto out; + } + +out: + kfree(ps_params); + return ret; +} + +int wl1271_cmd_template_set(struct wl1271 *wl, u16 template_id, + void *buf, size_t buf_len, int index, u32 rates) +{ + struct wl1271_cmd_template_set *cmd; + int ret = 0; + + wl1271_debug(DEBUG_CMD, "cmd template_set %d", template_id); + + WARN_ON(buf_len > WL1271_CMD_TEMPL_MAX_SIZE); + buf_len = min_t(size_t, buf_len, WL1271_CMD_TEMPL_MAX_SIZE); + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) { + ret = -ENOMEM; + goto out; + } + + cmd->len = cpu_to_le16(buf_len); + cmd->template_type = template_id; + cmd->enabled_rates = cpu_to_le32(rates); + cmd->short_retry_limit = wl->conf.tx.rc_conf.short_retry_limit; + cmd->long_retry_limit = wl->conf.tx.rc_conf.long_retry_limit; + cmd->index = index; + + if (buf) + memcpy(cmd->template_data, buf, buf_len); + + ret = wl1271_cmd_send(wl, CMD_SET_TEMPLATE, cmd, sizeof(*cmd), 0); + if (ret < 0) { + wl1271_warning("cmd set_template failed: %d", ret); + goto out_free; + } + +out_free: + kfree(cmd); + +out: + return ret; +} + +int wl1271_cmd_build_null_data(struct wl1271 *wl) +{ + struct sk_buff *skb = NULL; + int size; + void *ptr; + int ret = -ENOMEM; + + + if (wl->bss_type == BSS_TYPE_IBSS) { + size = sizeof(struct wl12xx_null_data_template); + ptr = NULL; + } else { + skb = ieee80211_nullfunc_get(wl->hw, wl->vif); + if (!skb) + goto out; + size = skb->len; + ptr = skb->data; + } + + ret = wl1271_cmd_template_set(wl, CMD_TEMPL_NULL_DATA, ptr, size, 0, + wl->basic_rate); + +out: + dev_kfree_skb(skb); + if (ret) + wl1271_warning("cmd buld null data failed %d", ret); + + return ret; + +} + +int wl1271_cmd_build_klv_null_data(struct wl1271 *wl) +{ + struct sk_buff *skb = NULL; + int ret = -ENOMEM; + + skb = ieee80211_nullfunc_get(wl->hw, wl->vif); + if (!skb) + goto out; + + ret = wl1271_cmd_template_set(wl, CMD_TEMPL_KLV, + skb->data, skb->len, + CMD_TEMPL_KLV_IDX_NULL_DATA, + wl->basic_rate); + +out: + dev_kfree_skb(skb); + if (ret) + wl1271_warning("cmd build klv null data failed %d", ret); + + return ret; + +} + +int wl1271_cmd_build_ps_poll(struct wl1271 *wl, u16 aid) +{ + struct sk_buff *skb; + int ret = 0; + + skb = ieee80211_pspoll_get(wl->hw, wl->vif); + if (!skb) + goto out; + + ret = wl1271_cmd_template_set(wl, CMD_TEMPL_PS_POLL, skb->data, + skb->len, 0, wl->basic_rate_set); + +out: + dev_kfree_skb(skb); + return ret; +} + +int wl1271_cmd_build_probe_req(struct wl1271 *wl, + const u8 *ssid, size_t ssid_len, + const u8 *ie, size_t ie_len, u8 band) +{ + struct sk_buff *skb; + int ret; + + skb = ieee80211_probereq_get(wl->hw, wl->vif, ssid, ssid_len, + ie, ie_len); + if (!skb) { + ret = -ENOMEM; + goto out; + } + + wl1271_dump(DEBUG_SCAN, "PROBE REQ: ", skb->data, skb->len); + + if (band == IEEE80211_BAND_2GHZ) + ret = wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_2_4, + skb->data, skb->len, 0, + wl->conf.tx.basic_rate); + else + ret = wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_5, + skb->data, skb->len, 0, + wl->conf.tx.basic_rate_5); + +out: + dev_kfree_skb(skb); + return ret; +} + +int wl1271_build_qos_null_data(struct wl1271 *wl) +{ + struct ieee80211_qos_hdr template; + + memset(&template, 0, sizeof(template)); + + memcpy(template.addr1, wl->bssid, ETH_ALEN); + memcpy(template.addr2, wl->mac_addr, ETH_ALEN); + memcpy(template.addr3, wl->bssid, ETH_ALEN); + + template.frame_control = cpu_to_le16(IEEE80211_FTYPE_DATA | + IEEE80211_STYPE_QOS_NULLFUNC | + IEEE80211_FCTL_TODS); + + /* FIXME: not sure what priority to use here */ + template.qos_ctrl = cpu_to_le16(0); + + return wl1271_cmd_template_set(wl, CMD_TEMPL_QOS_NULL_DATA, &template, + sizeof(template), 0, + wl->basic_rate); +} + +int wl1271_cmd_set_default_wep_key(struct wl1271 *wl, u8 id) +{ + struct wl1271_cmd_set_keys *cmd; + int ret = 0; + + wl1271_debug(DEBUG_CMD, "cmd set_default_wep_key %d", id); + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) { + ret = -ENOMEM; + goto out; + } + + cmd->id = id; + cmd->key_action = cpu_to_le16(KEY_SET_ID); + cmd->key_type = KEY_WEP; + + ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd), 0); + if (ret < 0) { + wl1271_warning("cmd set_default_wep_key failed: %d", ret); + goto out; + } + +out: + kfree(cmd); + + return ret; +} + +int wl1271_cmd_set_key(struct wl1271 *wl, u16 action, u8 id, u8 key_type, + u8 key_size, const u8 *key, const u8 *addr, + u32 tx_seq_32, u16 tx_seq_16) +{ + struct wl1271_cmd_set_keys *cmd; + int ret = 0; + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) { + ret = -ENOMEM; + goto out; + } + + if (key_type != KEY_WEP) + memcpy(cmd->addr, addr, ETH_ALEN); + + cmd->key_action = cpu_to_le16(action); + cmd->key_size = key_size; + cmd->key_type = key_type; + + cmd->ac_seq_num16[0] = cpu_to_le16(tx_seq_16); + cmd->ac_seq_num32[0] = cpu_to_le32(tx_seq_32); + + /* we have only one SSID profile */ + cmd->ssid_profile = 0; + + cmd->id = id; + + if (key_type == KEY_TKIP) { + /* + * We get the key in the following form: + * TKIP (16 bytes) - TX MIC (8 bytes) - RX MIC (8 bytes) + * but the target is expecting: + * TKIP - RX MIC - TX MIC + */ + memcpy(cmd->key, key, 16); + memcpy(cmd->key + 16, key + 24, 8); + memcpy(cmd->key + 24, key + 16, 8); + + } else { + memcpy(cmd->key, key, key_size); + } + + wl1271_dump(DEBUG_CRYPT, "TARGET KEY: ", cmd, sizeof(*cmd)); + + ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd), 0); + if (ret < 0) { + wl1271_warning("could not set keys"); + goto out; + } + +out: + kfree(cmd); + + return ret; +} + +int wl1271_cmd_disconnect(struct wl1271 *wl) +{ + struct wl1271_cmd_disconnect *cmd; + int ret = 0; + + wl1271_debug(DEBUG_CMD, "cmd disconnect"); + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) { + ret = -ENOMEM; + goto out; + } + + cmd->rx_config_options = cpu_to_le32(wl->rx_config); + cmd->rx_filter_options = cpu_to_le32(wl->rx_filter); + /* disconnect reason is not used in immediate disconnections */ + cmd->type = DISCONNECT_IMMEDIATE; + + ret = wl1271_cmd_send(wl, CMD_DISCONNECT, cmd, sizeof(*cmd), 0); + if (ret < 0) { + wl1271_error("failed to send disconnect command"); + goto out_free; + } + + ret = wl1271_cmd_wait_for_event(wl, DISCONNECT_EVENT_COMPLETE_ID); + if (ret < 0) + wl1271_error("cmd disconnect event completion error"); + +out_free: + kfree(cmd); + +out: + return ret; +} + +int wl1271_cmd_set_sta_state(struct wl1271 *wl) +{ + struct wl1271_cmd_set_sta_state *cmd; + int ret = 0; + + wl1271_debug(DEBUG_CMD, "cmd set sta state"); + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) { + ret = -ENOMEM; + goto out; + } + + cmd->state = WL1271_CMD_STA_STATE_CONNECTED; + + ret = wl1271_cmd_send(wl, CMD_SET_STA_STATE, cmd, sizeof(*cmd), 0); + if (ret < 0) { + wl1271_error("failed to send set STA state command"); + goto out_free; + } + +out_free: + kfree(cmd); + +out: + return ret; +} diff --git a/drivers/net/wireless/wl12xx/cmd.h b/drivers/net/wireless/wl12xx/cmd.h new file mode 100644 index 00000000000..893dbf72c2d --- /dev/null +++ b/drivers/net/wireless/wl12xx/cmd.h @@ -0,0 +1,459 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 1998-2009 Texas Instruments. All rights reserved. + * Copyright (C) 2009 Nokia Corporation + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __CMD_H__ +#define __CMD_H__ + +#include "wl12xx.h" + +struct acx_header; + +int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len, + size_t res_len); +int wl1271_cmd_general_parms(struct wl1271 *wl); +int wl1271_cmd_radio_parms(struct wl1271 *wl); +int wl1271_cmd_ext_radio_parms(struct wl1271 *wl); +int wl1271_cmd_join(struct wl1271 *wl, u8 bss_type); +int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer); +int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len); +int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len); +int wl1271_cmd_data_path(struct wl1271 *wl, bool enable); +int wl1271_cmd_ps_mode(struct wl1271 *wl, u8 ps_mode, u32 rates, bool send); +int wl1271_cmd_read_memory(struct wl1271 *wl, u32 addr, void *answer, + size_t len); +int wl1271_cmd_template_set(struct wl1271 *wl, u16 template_id, + void *buf, size_t buf_len, int index, u32 rates); +int wl1271_cmd_build_null_data(struct wl1271 *wl); +int wl1271_cmd_build_ps_poll(struct wl1271 *wl, u16 aid); +int wl1271_cmd_build_probe_req(struct wl1271 *wl, + const u8 *ssid, size_t ssid_len, + const u8 *ie, size_t ie_len, u8 band); +int wl1271_build_qos_null_data(struct wl1271 *wl); +int wl1271_cmd_build_klv_null_data(struct wl1271 *wl); +int wl1271_cmd_set_default_wep_key(struct wl1271 *wl, u8 id); +int wl1271_cmd_set_key(struct wl1271 *wl, u16 action, u8 id, u8 key_type, + u8 key_size, const u8 *key, const u8 *addr, + u32 tx_seq_32, u16 tx_seq_16); +int wl1271_cmd_disconnect(struct wl1271 *wl); +int wl1271_cmd_set_sta_state(struct wl1271 *wl); + +enum wl1271_commands { + CMD_INTERROGATE = 1, /*use this to read information elements*/ + CMD_CONFIGURE = 2, /*use this to write information elements*/ + CMD_ENABLE_RX = 3, + CMD_ENABLE_TX = 4, + CMD_DISABLE_RX = 5, + CMD_DISABLE_TX = 6, + CMD_SCAN = 8, + CMD_STOP_SCAN = 9, + CMD_START_JOIN = 11, + CMD_SET_KEYS = 12, + CMD_READ_MEMORY = 13, + CMD_WRITE_MEMORY = 14, + CMD_SET_TEMPLATE = 19, + CMD_TEST = 23, + CMD_NOISE_HIST = 28, + CMD_LNA_CONTROL = 32, + CMD_SET_BCN_MODE = 33, + CMD_MEASUREMENT = 34, + CMD_STOP_MEASUREMENT = 35, + CMD_DISCONNECT = 36, + CMD_SET_PS_MODE = 37, + CMD_CHANNEL_SWITCH = 38, + CMD_STOP_CHANNEL_SWICTH = 39, + CMD_AP_DISCOVERY = 40, + CMD_STOP_AP_DISCOVERY = 41, + CMD_SPS_SCAN = 42, + CMD_STOP_SPS_SCAN = 43, + CMD_HEALTH_CHECK = 45, + CMD_DEBUG = 46, + CMD_TRIGGER_SCAN_TO = 47, + CMD_CONNECTION_SCAN_CFG = 48, + CMD_CONNECTION_SCAN_SSID_CFG = 49, + CMD_START_PERIODIC_SCAN = 50, + CMD_STOP_PERIODIC_SCAN = 51, + CMD_SET_STA_STATE = 52, + + NUM_COMMANDS, + MAX_COMMAND_ID = 0xFFFF, +}; + +#define MAX_CMD_PARAMS 572 + +enum { + CMD_TEMPL_KLV_IDX_NULL_DATA = 0, + CMD_TEMPL_KLV_IDX_MAX = 4 +}; + +enum cmd_templ { + CMD_TEMPL_NULL_DATA = 0, + CMD_TEMPL_BEACON, + CMD_TEMPL_CFG_PROBE_REQ_2_4, + CMD_TEMPL_CFG_PROBE_REQ_5, + CMD_TEMPL_PROBE_RESPONSE, + CMD_TEMPL_QOS_NULL_DATA, + CMD_TEMPL_PS_POLL, + CMD_TEMPL_KLV, + CMD_TEMPL_DISCONNECT, + CMD_TEMPL_PROBE_REQ_2_4, /* for firmware internal use only */ + CMD_TEMPL_PROBE_REQ_5, /* for firmware internal use only */ + CMD_TEMPL_BAR, /* for firmware internal use only */ + CMD_TEMPL_CTS, /* + * For CTS-to-self (FastCTS) mechanism + * for BT/WLAN coexistence (SoftGemini). */ + CMD_TEMPL_MAX = 0xff +}; + +/* unit ms */ +#define WL1271_COMMAND_TIMEOUT 2000 +#define WL1271_CMD_TEMPL_MAX_SIZE 252 +#define WL1271_EVENT_TIMEOUT 750 + +struct wl1271_cmd_header { + __le16 id; + __le16 status; + /* payload */ + u8 data[0]; +} __packed; + +#define WL1271_CMD_MAX_PARAMS 572 + +struct wl1271_command { + struct wl1271_cmd_header header; + u8 parameters[WL1271_CMD_MAX_PARAMS]; +} __packed; + +enum { + CMD_MAILBOX_IDLE = 0, + CMD_STATUS_SUCCESS = 1, + CMD_STATUS_UNKNOWN_CMD = 2, + CMD_STATUS_UNKNOWN_IE = 3, + CMD_STATUS_REJECT_MEAS_SG_ACTIVE = 11, + CMD_STATUS_RX_BUSY = 13, + CMD_STATUS_INVALID_PARAM = 14, + CMD_STATUS_TEMPLATE_TOO_LARGE = 15, + CMD_STATUS_OUT_OF_MEMORY = 16, + CMD_STATUS_STA_TABLE_FULL = 17, + CMD_STATUS_RADIO_ERROR = 18, + CMD_STATUS_WRONG_NESTING = 19, + CMD_STATUS_TIMEOUT = 21, /* Driver internal use.*/ + CMD_STATUS_FW_RESET = 22, /* Driver internal use.*/ + MAX_COMMAND_STATUS = 0xff +}; + +#define CMDMBOX_HEADER_LEN 4 +#define CMDMBOX_INFO_ELEM_HEADER_LEN 4 + +enum { + BSS_TYPE_IBSS = 0, + BSS_TYPE_STA_BSS = 2, + BSS_TYPE_AP_BSS = 3, + MAX_BSS_TYPE = 0xFF +}; + +#define WL1271_JOIN_CMD_CTRL_TX_FLUSH 0x80 /* Firmware flushes all Tx */ +#define WL1271_JOIN_CMD_TX_SESSION_OFFSET 1 +#define WL1271_JOIN_CMD_BSS_TYPE_5GHZ 0x10 + +struct wl1271_cmd_join { + struct wl1271_cmd_header header; + + __le32 bssid_lsb; + __le16 bssid_msb; + __le16 beacon_interval; /* in TBTTs */ + __le32 rx_config_options; + __le32 rx_filter_options; + + /* + * The target uses this field to determine the rate at + * which to transmit control frame responses (such as + * ACK or CTS frames). + */ + __le32 basic_rate_set; + u8 dtim_interval; + /* + * bits 0-2: This bitwise field specifies the type + * of BSS to start or join (BSS_TYPE_*). + * bit 4: Band - The radio band in which to join + * or start. + * 0 - 2.4GHz band + * 1 - 5GHz band + * bits 3, 5-7: Reserved + */ + u8 bss_type; + u8 channel; + u8 ssid_len; + u8 ssid[IW_ESSID_MAX_SIZE]; + u8 ctrl; /* JOIN_CMD_CTRL_* */ + u8 reserved[3]; +} __packed; + +struct cmd_enabledisable_path { + struct wl1271_cmd_header header; + + u8 channel; + u8 padding[3]; +} __packed; + +#define WL1271_RATE_AUTOMATIC 0 + +struct wl1271_cmd_template_set { + struct wl1271_cmd_header header; + + __le16 len; + u8 template_type; + u8 index; /* relevant only for KLV_TEMPLATE type */ + __le32 enabled_rates; + u8 short_retry_limit; + u8 long_retry_limit; + u8 aflags; + u8 reserved; + u8 template_data[WL1271_CMD_TEMPL_MAX_SIZE]; +} __packed; + +#define TIM_ELE_ID 5 +#define PARTIAL_VBM_MAX 251 + +struct wl1271_tim { + u8 identity; + u8 length; + u8 dtim_count; + u8 dtim_period; + u8 bitmap_ctrl; + u8 pvb_field[PARTIAL_VBM_MAX]; /* Partial Virtual Bitmap */ +} __packed; + +enum wl1271_cmd_ps_mode { + STATION_ACTIVE_MODE, + STATION_POWER_SAVE_MODE +}; + +struct wl1271_cmd_ps_params { + struct wl1271_cmd_header header; + + u8 ps_mode; /* STATION_* */ + u8 send_null_data; /* Do we have to send NULL data packet ? */ + u8 retries; /* Number of retires for the initial NULL data packet */ + + /* + * TUs during which the target stays awake after switching + * to power save mode. + */ + u8 hang_over_period; + __le32 null_data_rate; +} __packed; + +/* HW encryption keys */ +#define NUM_ACCESS_CATEGORIES_COPY 4 +#define MAX_KEY_SIZE 32 + +enum wl1271_cmd_key_action { + KEY_ADD_OR_REPLACE = 1, + KEY_REMOVE = 2, + KEY_SET_ID = 3, + MAX_KEY_ACTION = 0xffff, +}; + +enum wl1271_cmd_key_type { + KEY_NONE = 0, + KEY_WEP = 1, + KEY_TKIP = 2, + KEY_AES = 3, + KEY_GEM = 4, +}; + +/* FIXME: Add description for key-types */ + +struct wl1271_cmd_set_keys { + struct wl1271_cmd_header header; + + /* Ignored for default WEP key */ + u8 addr[ETH_ALEN]; + + /* key_action_e */ + __le16 key_action; + + __le16 reserved_1; + + /* key size in bytes */ + u8 key_size; + + /* key_type_e */ + u8 key_type; + u8 ssid_profile; + + /* + * TKIP, AES: frame's key id field. + * For WEP default key: key id; + */ + u8 id; + u8 reserved_2[6]; + u8 key[MAX_KEY_SIZE]; + __le16 ac_seq_num16[NUM_ACCESS_CATEGORIES_COPY]; + __le32 ac_seq_num32[NUM_ACCESS_CATEGORIES_COPY]; +} __packed; + +struct wl1271_cmd_test_header { + u8 id; + u8 padding[3]; +} __packed; + +enum wl1271_channel_tune_bands { + WL1271_CHANNEL_TUNE_BAND_2_4, + WL1271_CHANNEL_TUNE_BAND_5, + WL1271_CHANNEL_TUNE_BAND_4_9 +}; + +#define WL1271_PD_REFERENCE_POINT_BAND_B_G 0 + +#define TEST_CMD_P2G_CAL 0x02 +#define TEST_CMD_CHANNEL_TUNE 0x0d +#define TEST_CMD_UPDATE_PD_REFERENCE_POINT 0x1d +#define TEST_CMD_INI_FILE_RADIO_PARAM 0x19 +#define TEST_CMD_INI_FILE_GENERAL_PARAM 0x1E +#define TEST_CMD_INI_FILE_RF_EXTENDED_PARAM 0x26 + +struct wl1271_general_parms_cmd { + struct wl1271_cmd_header header; + + struct wl1271_cmd_test_header test; + + struct wl1271_ini_general_params general_params; + + u8 sr_debug_table[WL1271_INI_MAX_SMART_REFLEX_PARAM]; + u8 sr_sen_n_p; + u8 sr_sen_n_p_gain; + u8 sr_sen_nrn; + u8 sr_sen_prn; + u8 padding[3]; +} __packed; + +struct wl1271_radio_parms_cmd { + struct wl1271_cmd_header header; + + struct wl1271_cmd_test_header test; + + /* Static radio parameters */ + struct wl1271_ini_band_params_2 static_params_2; + struct wl1271_ini_band_params_5 static_params_5; + + /* Dynamic radio parameters */ + struct wl1271_ini_fem_params_2 dyn_params_2; + u8 padding2; + struct wl1271_ini_fem_params_5 dyn_params_5; + u8 padding3[2]; +} __packed; + +struct wl1271_ext_radio_parms_cmd { + struct wl1271_cmd_header header; + + struct wl1271_cmd_test_header test; + + u8 tx_per_channel_power_compensation_2[CONF_TX_PWR_COMPENSATION_LEN_2]; + u8 tx_per_channel_power_compensation_5[CONF_TX_PWR_COMPENSATION_LEN_5]; + u8 padding[3]; +} __packed; + +struct wl1271_cmd_cal_channel_tune { + struct wl1271_cmd_header header; + + struct wl1271_cmd_test_header test; + + u8 band; + u8 channel; + + __le16 radio_status; +} __packed; + +struct wl1271_cmd_cal_update_ref_point { + struct wl1271_cmd_header header; + + struct wl1271_cmd_test_header test; + + __le32 ref_power; + __le32 ref_detector; + u8 sub_band; + u8 padding[3]; +} __packed; + +#define MAX_TLV_LENGTH 400 +#define MAX_NVS_VERSION_LENGTH 12 + +#define WL1271_CAL_P2G_BAND_B_G BIT(0) + +struct wl1271_cmd_cal_p2g { + struct wl1271_cmd_header header; + + struct wl1271_cmd_test_header test; + + __le16 len; + u8 buf[MAX_TLV_LENGTH]; + u8 type; + u8 padding; + + __le16 radio_status; + u8 nvs_version[MAX_NVS_VERSION_LENGTH]; + + u8 sub_band_mask; + u8 padding2; +} __packed; + + +/* + * There are three types of disconnections: + * + * DISCONNECT_IMMEDIATE: the fw doesn't send any frames + * DISCONNECT_DEAUTH: the fw generates a DEAUTH request with the reason + * we have passed + * DISCONNECT_DISASSOC: the fw generates a DESASSOC request with the reason + * we have passed + */ +enum wl1271_disconnect_type { + DISCONNECT_IMMEDIATE, + DISCONNECT_DEAUTH, + DISCONNECT_DISASSOC +}; + +struct wl1271_cmd_disconnect { + struct wl1271_cmd_header header; + + __le32 rx_config_options; + __le32 rx_filter_options; + + __le16 reason; + u8 type; + + u8 padding; +} __packed; + +#define WL1271_CMD_STA_STATE_CONNECTED 1 + +struct wl1271_cmd_set_sta_state { + struct wl1271_cmd_header header; + + u8 state; + u8 padding[3]; +} __packed; + +#endif /* __WL1271_CMD_H__ */ diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h new file mode 100644 index 00000000000..a16b3616e43 --- /dev/null +++ b/drivers/net/wireless/wl12xx/conf.h @@ -0,0 +1,1105 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 2009 Nokia Corporation + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __CONF_H__ +#define __CONF_H__ + +enum { + CONF_HW_BIT_RATE_1MBPS = BIT(0), + CONF_HW_BIT_RATE_2MBPS = BIT(1), + CONF_HW_BIT_RATE_5_5MBPS = BIT(2), + CONF_HW_BIT_RATE_6MBPS = BIT(3), + CONF_HW_BIT_RATE_9MBPS = BIT(4), + CONF_HW_BIT_RATE_11MBPS = BIT(5), + CONF_HW_BIT_RATE_12MBPS = BIT(6), + CONF_HW_BIT_RATE_18MBPS = BIT(7), + CONF_HW_BIT_RATE_22MBPS = BIT(8), + CONF_HW_BIT_RATE_24MBPS = BIT(9), + CONF_HW_BIT_RATE_36MBPS = BIT(10), + CONF_HW_BIT_RATE_48MBPS = BIT(11), + CONF_HW_BIT_RATE_54MBPS = BIT(12), + CONF_HW_BIT_RATE_MCS_0 = BIT(13), + CONF_HW_BIT_RATE_MCS_1 = BIT(14), + CONF_HW_BIT_RATE_MCS_2 = BIT(15), + CONF_HW_BIT_RATE_MCS_3 = BIT(16), + CONF_HW_BIT_RATE_MCS_4 = BIT(17), + CONF_HW_BIT_RATE_MCS_5 = BIT(18), + CONF_HW_BIT_RATE_MCS_6 = BIT(19), + CONF_HW_BIT_RATE_MCS_7 = BIT(20) +}; + +enum { + CONF_HW_RATE_INDEX_1MBPS = 0, + CONF_HW_RATE_INDEX_2MBPS = 1, + CONF_HW_RATE_INDEX_5_5MBPS = 2, + CONF_HW_RATE_INDEX_6MBPS = 3, + CONF_HW_RATE_INDEX_9MBPS = 4, + CONF_HW_RATE_INDEX_11MBPS = 5, + CONF_HW_RATE_INDEX_12MBPS = 6, + CONF_HW_RATE_INDEX_18MBPS = 7, + CONF_HW_RATE_INDEX_22MBPS = 8, + CONF_HW_RATE_INDEX_24MBPS = 9, + CONF_HW_RATE_INDEX_36MBPS = 10, + CONF_HW_RATE_INDEX_48MBPS = 11, + CONF_HW_RATE_INDEX_54MBPS = 12, + CONF_HW_RATE_INDEX_MAX = CONF_HW_RATE_INDEX_54MBPS, +}; + +enum { + CONF_HW_RXTX_RATE_MCS7 = 0, + CONF_HW_RXTX_RATE_MCS6, + CONF_HW_RXTX_RATE_MCS5, + CONF_HW_RXTX_RATE_MCS4, + CONF_HW_RXTX_RATE_MCS3, + CONF_HW_RXTX_RATE_MCS2, + CONF_HW_RXTX_RATE_MCS1, + CONF_HW_RXTX_RATE_MCS0, + CONF_HW_RXTX_RATE_54, + CONF_HW_RXTX_RATE_48, + CONF_HW_RXTX_RATE_36, + CONF_HW_RXTX_RATE_24, + CONF_HW_RXTX_RATE_22, + CONF_HW_RXTX_RATE_18, + CONF_HW_RXTX_RATE_12, + CONF_HW_RXTX_RATE_11, + CONF_HW_RXTX_RATE_9, + CONF_HW_RXTX_RATE_6, + CONF_HW_RXTX_RATE_5_5, + CONF_HW_RXTX_RATE_2, + CONF_HW_RXTX_RATE_1, + CONF_HW_RXTX_RATE_MAX, + CONF_HW_RXTX_RATE_UNSUPPORTED = 0xff +}; + +enum { + CONF_SG_DISABLE = 0, + CONF_SG_PROTECTIVE, + CONF_SG_OPPORTUNISTIC +}; + +enum { + /* + * PER threshold in PPM of the BT voice + * + * Range: 0 - 10000000 + */ + CONF_SG_BT_PER_THRESHOLD = 0, + + /* + * Number of consequent RX_ACTIVE activities to override BT voice + * frames to ensure WLAN connection + * + * Range: 0 - 100 + */ + CONF_SG_HV3_MAX_OVERRIDE, + + /* + * Defines the PER threshold of the BT voice + * + * Range: 0 - 65000 + */ + CONF_SG_BT_NFS_SAMPLE_INTERVAL, + + /* + * Defines the load ratio of BT + * + * Range: 0 - 100 (%) + */ + CONF_SG_BT_LOAD_RATIO, + + /* + * Defines whether the SG will force WLAN host to enter/exit PSM + * + * Range: 1 - SG can force, 0 - host handles PSM + */ + CONF_SG_AUTO_PS_MODE, + + /* + * Compensation percentage of probe requests when scan initiated + * during BT voice/ACL link. + * + * Range: 0 - 255 (%) + */ + CONF_SG_AUTO_SCAN_PROBE_REQ, + + /* + * Compensation percentage of probe requests when active scan initiated + * during BT voice + * + * Range: 0 - 255 (%) + */ + CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3, + + /* + * Defines antenna configuration (single/dual antenna) + * + * Range: 0 - single antenna, 1 - dual antenna + */ + CONF_SG_ANTENNA_CONFIGURATION, + + /* + * The threshold (percent) of max consequtive beacon misses before + * increasing priority of beacon reception. + * + * Range: 0 - 100 (%) + */ + CONF_SG_BEACON_MISS_PERCENT, + + /* + * The rate threshold below which receiving a data frame from the AP + * will increase the priority of the data frame above BT traffic. + * + * Range: 0,2, 5(=5.5), 6, 9, 11, 12, 18, 24, 36, 48, 54 + */ + CONF_SG_RATE_ADAPT_THRESH, + + /* + * Not used currently. + * + * Range: 0 + */ + CONF_SG_RATE_ADAPT_SNR, + + /* + * Configure the min and max time BT gains the antenna + * in WLAN PSM / BT master basic rate + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR, + CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR, + + /* + * The time after it expires no new WLAN trigger frame is trasmitted + * in WLAN PSM / BT master basic rate + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR, + + /* + * Configure the min and max time BT gains the antenna + * in WLAN PSM / BT slave basic rate + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR, + CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR, + + /* + * The time after it expires no new WLAN trigger frame is trasmitted + * in WLAN PSM / BT slave basic rate + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR, + + /* + * Configure the min and max time BT gains the antenna + * in WLAN PSM / BT master EDR + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR, + CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR, + + /* + * The time after it expires no new WLAN trigger frame is trasmitted + * in WLAN PSM / BT master EDR + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR, + + /* + * Configure the min and max time BT gains the antenna + * in WLAN PSM / BT slave EDR + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR, + CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR, + + /* + * The time after it expires no new WLAN trigger frame is trasmitted + * in WLAN PSM / BT slave EDR + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR, + + /* + * RX guard time before the beginning of a new BT voice frame during + * which no new WLAN trigger frame is transmitted. + * + * Range: 0 - 100000 (us) + */ + CONF_SG_RXT, + + /* + * TX guard time before the beginning of a new BT voice frame during + * which no new WLAN frame is transmitted. + * + * Range: 0 - 100000 (us) + */ + + CONF_SG_TXT, + + /* + * Enable adaptive RXT/TXT algorithm. If disabled, the host values + * will be utilized. + * + * Range: 0 - disable, 1 - enable + */ + CONF_SG_ADAPTIVE_RXT_TXT, + + /* + * The used WLAN legacy service period during active BT ACL link + * + * Range: 0 - 255 (ms) + */ + CONF_SG_PS_POLL_TIMEOUT, + + /* + * The used WLAN UPSD service period during active BT ACL link + * + * Range: 0 - 255 (ms) + */ + CONF_SG_UPSD_TIMEOUT, + + /* + * Configure the min and max time BT gains the antenna + * in WLAN Active / BT master EDR + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR, + CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR, + + /* + * The maximum time WLAN can gain the antenna for + * in WLAN Active / BT master EDR + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR, + + /* + * Configure the min and max time BT gains the antenna + * in WLAN Active / BT slave EDR + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR, + CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR, + + /* + * The maximum time WLAN can gain the antenna for + * in WLAN Active / BT slave EDR + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR, + + /* + * Configure the min and max time BT gains the antenna + * in WLAN Active / BT basic rate + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR, + CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR, + + /* + * The maximum time WLAN can gain the antenna for + * in WLAN Active / BT basic rate + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR, + + /* + * Compensation percentage of WLAN passive scan window if initiated + * during BT voice + * + * Range: 0 - 1000 (%) + */ + CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3, + + /* + * Compensation percentage of WLAN passive scan window if initiated + * during BT A2DP + * + * Range: 0 - 1000 (%) + */ + CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP, + + /* + * Fixed time ensured for BT traffic to gain the antenna during WLAN + * passive scan. + * + * Range: 0 - 1000 ms + */ + CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME, + + /* + * Fixed time ensured for WLAN traffic to gain the antenna during WLAN + * passive scan. + * + * Range: 0 - 1000 ms + */ + CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME, + + /* + * Number of consequent BT voice frames not interrupted by WLAN + * + * Range: 0 - 100 + */ + CONF_SG_HV3_MAX_SERVED, + + /* + * Protection time of the DHCP procedure. + * + * Range: 0 - 100000 (ms) + */ + CONF_SG_DHCP_TIME, + + /* + * Compensation percentage of WLAN active scan window if initiated + * during BT A2DP + * + * Range: 0 - 1000 (%) + */ + CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP, + CONF_SG_TEMP_PARAM_1, + CONF_SG_TEMP_PARAM_2, + CONF_SG_TEMP_PARAM_3, + CONF_SG_TEMP_PARAM_4, + CONF_SG_TEMP_PARAM_5, + CONF_SG_PARAMS_MAX, + CONF_SG_PARAMS_ALL = 0xff +}; + +struct conf_sg_settings { + u32 params[CONF_SG_PARAMS_MAX]; + u8 state; +}; + +enum conf_rx_queue_type { + CONF_RX_QUEUE_TYPE_LOW_PRIORITY, /* All except the high priority */ + CONF_RX_QUEUE_TYPE_HIGH_PRIORITY, /* Management and voice packets */ +}; + +struct conf_rx_settings { + /* + * The maximum amount of time, in TU, before the + * firmware discards the MSDU. + * + * Range: 0 - 0xFFFFFFFF + */ + u32 rx_msdu_life_time; + + /* + * Packet detection threshold in the PHY. + * + * FIXME: details unknown. + */ + u32 packet_detection_threshold; + + /* + * The longest time the STA will wait to receive traffic from the AP + * after a PS-poll has been transmitted. + * + * Range: 0 - 200000 + */ + u16 ps_poll_timeout; + /* + * The longest time the STA will wait to receive traffic from the AP + * after a frame has been sent from an UPSD enabled queue. + * + * Range: 0 - 200000 + */ + u16 upsd_timeout; + + /* + * The number of octets in an MPDU, below which an RTS/CTS + * handshake is not performed. + * + * Range: 0 - 4096 + */ + u16 rts_threshold; + + /* + * The RX Clear Channel Assessment threshold in the PHY + * (the energy threshold). + * + * Range: ENABLE_ENERGY_D == 0x140A + * DISABLE_ENERGY_D == 0xFFEF + */ + u16 rx_cca_threshold; + + /* + * Occupied Rx mem-blocks number which requires interrupting the host + * (0 = no buffering, 0xffff = disabled). + * + * Range: u16 + */ + u16 irq_blk_threshold; + + /* + * Rx packets number which requires interrupting the host + * (0 = no buffering). + * + * Range: u16 + */ + u16 irq_pkt_threshold; + + /* + * Max time in msec the FW may delay RX-Complete interrupt. + * + * Range: 1 - 100 + */ + u16 irq_timeout; + + /* + * The RX queue type. + * + * Range: RX_QUEUE_TYPE_RX_LOW_PRIORITY, RX_QUEUE_TYPE_RX_HIGH_PRIORITY, + */ + u8 queue_type; +}; + +#define CONF_TX_MAX_RATE_CLASSES 8 + +#define CONF_TX_RATE_MASK_UNSPECIFIED 0 +#define CONF_TX_RATE_MASK_BASIC (CONF_HW_BIT_RATE_1MBPS | \ + CONF_HW_BIT_RATE_2MBPS) +#define CONF_TX_RATE_RETRY_LIMIT 10 + +struct conf_tx_rate_class { + + /* + * The rates enabled for this rate class. + * + * Range: CONF_HW_BIT_RATE_* bit mask + */ + u32 enabled_rates; + + /* + * The dot11 short retry limit used for TX retries. + * + * Range: u8 + */ + u8 short_retry_limit; + + /* + * The dot11 long retry limit used for TX retries. + * + * Range: u8 + */ + u8 long_retry_limit; + + /* + * Flags controlling the attributes of TX transmission. + * + * Range: bit 0: Truncate - when set, FW attempts to send a frame stop + * when the total valid per-rate attempts have + * been exhausted; otherwise transmissions + * will continue at the lowest available rate + * until the appropriate one of the + * short_retry_limit, long_retry_limit, + * dot11_max_transmit_msdu_life_time, or + * max_tx_life_time, is exhausted. + * 1: Preamble Override - indicates if the preamble type + * should be used in TX. + * 2: Preamble Type - the type of the preamble to be used by + * the policy (0 - long preamble, 1 - short preamble. + */ + u8 aflags; +}; + +#define CONF_TX_MAX_AC_COUNT 4 + +/* Slot number setting to start transmission at PIFS interval */ +#define CONF_TX_AIFS_PIFS 1 +/* Slot number setting to start transmission at DIFS interval normal + * DCF access */ +#define CONF_TX_AIFS_DIFS 2 + + +enum conf_tx_ac { + CONF_TX_AC_BE = 0, /* best effort / legacy */ + CONF_TX_AC_BK = 1, /* background */ + CONF_TX_AC_VI = 2, /* video */ + CONF_TX_AC_VO = 3, /* voice */ + CONF_TX_AC_CTS2SELF = 4, /* fictious AC, follows AC_VO */ + CONF_TX_AC_ANY_TID = 0x1f +}; + +struct conf_tx_ac_category { + /* + * The AC class identifier. + * + * Range: enum conf_tx_ac + */ + u8 ac; + + /* + * The contention window minimum size (in slots) for the access + * class. + * + * Range: u8 + */ + u8 cw_min; + + /* + * The contention window maximum size (in slots) for the access + * class. + * + * Range: u8 + */ + u16 cw_max; + + /* + * The AIF value (in slots) for the access class. + * + * Range: u8 + */ + u8 aifsn; + + /* + * The TX Op Limit (in microseconds) for the access class. + * + * Range: u16 + */ + u16 tx_op_limit; +}; + +#define CONF_TX_MAX_TID_COUNT 8 + +enum { + CONF_CHANNEL_TYPE_DCF = 0, /* DC/LEGACY*/ + CONF_CHANNEL_TYPE_EDCF = 1, /* EDCA*/ + CONF_CHANNEL_TYPE_HCCA = 2, /* HCCA*/ +}; + +enum { + CONF_PS_SCHEME_LEGACY = 0, + CONF_PS_SCHEME_UPSD_TRIGGER = 1, + CONF_PS_SCHEME_LEGACY_PSPOLL = 2, + CONF_PS_SCHEME_SAPSD = 3, +}; + +enum { + CONF_ACK_POLICY_LEGACY = 0, + CONF_ACK_POLICY_NO_ACK = 1, + CONF_ACK_POLICY_BLOCK = 2, +}; + + +struct conf_tx_tid { + u8 queue_id; + u8 channel_type; + u8 tsid; + u8 ps_scheme; + u8 ack_policy; + u32 apsd_conf[2]; +}; + +struct conf_tx_settings { + /* + * The TX ED value for TELEC Enable/Disable. + * + * Range: 0, 1 + */ + u8 tx_energy_detection; + + /* + * Configuration for rate classes for TX (currently only one + * rate class supported.) + */ + struct conf_tx_rate_class rc_conf; + + /* + * Configuration for access categories for TX rate control. + */ + u8 ac_conf_count; + struct conf_tx_ac_category ac_conf[CONF_TX_MAX_AC_COUNT]; + + /* + * Configuration for TID parameters. + */ + u8 tid_conf_count; + struct conf_tx_tid tid_conf[CONF_TX_MAX_TID_COUNT]; + + /* + * The TX fragmentation threshold. + * + * Range: u16 + */ + u16 frag_threshold; + + /* + * Max time in msec the FW may delay frame TX-Complete interrupt. + * + * Range: u16 + */ + u16 tx_compl_timeout; + + /* + * Completed TX packet count which requires to issue the TX-Complete + * interrupt. + * + * Range: u16 + */ + u16 tx_compl_threshold; + + /* + * The rate used for control messages and scanning on the 2.4GHz band + * + * Range: CONF_HW_BIT_RATE_* bit mask + */ + u32 basic_rate; + + /* + * The rate used for control messages and scanning on the 5GHz band + * + * Range: CONF_HW_BIT_RATE_* bit mask + */ + u32 basic_rate_5; +}; + +enum { + CONF_WAKE_UP_EVENT_BEACON = 0x01, /* Wake on every Beacon*/ + CONF_WAKE_UP_EVENT_DTIM = 0x02, /* Wake on every DTIM*/ + CONF_WAKE_UP_EVENT_N_DTIM = 0x04, /* Wake every Nth DTIM */ + CONF_WAKE_UP_EVENT_N_BEACONS = 0x08, /* Wake every Nth beacon */ + CONF_WAKE_UP_EVENT_BITS_MASK = 0x0F +}; + +#define CONF_MAX_BCN_FILT_IE_COUNT 32 + +#define CONF_BCN_RULE_PASS_ON_CHANGE BIT(0) +#define CONF_BCN_RULE_PASS_ON_APPEARANCE BIT(1) + +#define CONF_BCN_IE_OUI_LEN 3 +#define CONF_BCN_IE_VER_LEN 2 + +struct conf_bcn_filt_rule { + /* + * IE number to which to associate a rule. + * + * Range: u8 + */ + u8 ie; + + /* + * Rule to associate with the specific ie. + * + * Range: CONF_BCN_RULE_PASS_ON_* + */ + u8 rule; + + /* + * OUI for the vendor specifie IE (221) + */ + u8 oui[CONF_BCN_IE_OUI_LEN]; + + /* + * Type for the vendor specifie IE (221) + */ + u8 type; + + /* + * Version for the vendor specifie IE (221) + */ + u8 version[CONF_BCN_IE_VER_LEN]; +}; + +#define CONF_MAX_RSSI_SNR_TRIGGERS 8 + +enum { + CONF_TRIG_METRIC_RSSI_BEACON = 0, + CONF_TRIG_METRIC_RSSI_DATA, + CONF_TRIG_METRIC_SNR_BEACON, + CONF_TRIG_METRIC_SNR_DATA +}; + +enum { + CONF_TRIG_EVENT_TYPE_LEVEL = 0, + CONF_TRIG_EVENT_TYPE_EDGE +}; + +enum { + CONF_TRIG_EVENT_DIR_LOW = 0, + CONF_TRIG_EVENT_DIR_HIGH, + CONF_TRIG_EVENT_DIR_BIDIR +}; + +struct conf_sig_weights { + + /* + * RSSI from beacons average weight. + * + * Range: u8 + */ + u8 rssi_bcn_avg_weight; + + /* + * RSSI from data average weight. + * + * Range: u8 + */ + u8 rssi_pkt_avg_weight; + + /* + * SNR from beacons average weight. + * + * Range: u8 + */ + u8 snr_bcn_avg_weight; + + /* + * SNR from data average weight. + * + * Range: u8 + */ + u8 snr_pkt_avg_weight; +}; + +enum conf_bcn_filt_mode { + CONF_BCN_FILT_MODE_DISABLED = 0, + CONF_BCN_FILT_MODE_ENABLED = 1 +}; + +enum conf_bet_mode { + CONF_BET_MODE_DISABLE = 0, + CONF_BET_MODE_ENABLE = 1, +}; + +struct conf_conn_settings { + /* + * Firmware wakeup conditions configuration. The host may set only + * one bit. + * + * Range: CONF_WAKE_UP_EVENT_* + */ + u8 wake_up_event; + + /* + * Listen interval for beacons or Dtims. + * + * Range: 0 for beacon and Dtim wakeup + * 1-10 for x Dtims + * 1-255 for x beacons + */ + u8 listen_interval; + + /* + * Enable or disable the beacon filtering. + * + * Range: CONF_BCN_FILT_MODE_* + */ + enum conf_bcn_filt_mode bcn_filt_mode; + + /* + * Configure Beacon filter pass-thru rules. + */ + u8 bcn_filt_ie_count; + struct conf_bcn_filt_rule bcn_filt_ie[CONF_MAX_BCN_FILT_IE_COUNT]; + + /* + * The number of consequtive beacons to lose, before the firmware + * becomes out of synch. + * + * Range: u32 + */ + u32 synch_fail_thold; + + /* + * After out-of-synch, the number of TU's to wait without a further + * received beacon (or probe response) before issuing the BSS_EVENT_LOSE + * event. + * + * Range: u32 + */ + u32 bss_lose_timeout; + + /* + * Beacon receive timeout. + * + * Range: u32 + */ + u32 beacon_rx_timeout; + + /* + * Broadcast receive timeout. + * + * Range: u32 + */ + u32 broadcast_timeout; + + /* + * Enable/disable reception of broadcast packets in power save mode + * + * Range: 1 - enable, 0 - disable + */ + u8 rx_broadcast_in_ps; + + /* + * Consequtive PS Poll failures before sending event to driver + * + * Range: u8 + */ + u8 ps_poll_threshold; + + /* + * PS Poll failure recovery ACTIVE period length + * + * Range: u32 (ms) + */ + u32 ps_poll_recovery_period; + + /* + * Configuration of signal average weights. + */ + struct conf_sig_weights sig_weights; + + /* + * Specifies if beacon early termination procedure is enabled or + * disabled. + * + * Range: CONF_BET_MODE_* + */ + u8 bet_enable; + + /* + * Specifies the maximum number of consecutive beacons that may be + * early terminated. After this number is reached at least one full + * beacon must be correctly received in FW before beacon ET + * resumes. + * + * Range 0 - 255 + */ + u8 bet_max_consecutive; + + /* + * Specifies the maximum number of times to try PSM entry if it fails + * (if sending the appropriate null-func message fails.) + * + * Range 0 - 255 + */ + u8 psm_entry_retries; + + /* + * Specifies the maximum number of times to try transmit the PSM entry + * null-func frame for each PSM entry attempt + * + * Range 0 - 255 + */ + u8 psm_entry_nullfunc_retries; + + /* + * Specifies the time to linger in active mode after successfully + * transmitting the PSM entry null-func frame. + * + * Range 0 - 255 TU's + */ + u8 psm_entry_hangover_period; + + /* + * + * Specifies the interval of the connection keep-alive null-func + * frame in ms. + * + * Range: 1000 - 3600000 + */ + u32 keep_alive_interval; + + /* + * Maximum listen interval supported by the driver in units of beacons. + * + * Range: u16 + */ + u8 max_listen_interval; +}; + +enum { + CONF_REF_CLK_19_2_E, + CONF_REF_CLK_26_E, + CONF_REF_CLK_38_4_E, + CONF_REF_CLK_52_E +}; + +enum single_dual_band_enum { + CONF_SINGLE_BAND, + CONF_DUAL_BAND +}; + +#define CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE 15 +#define CONF_NUMBER_OF_SUB_BANDS_5 7 +#define CONF_NUMBER_OF_RATE_GROUPS 6 +#define CONF_NUMBER_OF_CHANNELS_2_4 14 +#define CONF_NUMBER_OF_CHANNELS_5 35 + +struct conf_radio_parms { + /* + * FEM parameter set to use + * + * Range: 0 or 1 + */ + u8 fem; +}; + +struct conf_itrim_settings { + /* enable dco itrim */ + u8 enable; + + /* moderation timeout in microsecs from the last TX */ + u32 timeout; +}; + +struct conf_pm_config_settings { + /* + * Host clock settling time + * + * Range: 0 - 30000 us + */ + u32 host_clk_settling_time; + + /* + * Host fast wakeup support + * + * Range: true, false + */ + bool host_fast_wakeup_support; +}; + +struct conf_roam_trigger_settings { + /* + * The minimum interval between two trigger events. + * + * Range: 0 - 60000 ms + */ + u16 trigger_pacing; + + /* + * The weight for rssi/beacon average calculation + * + * Range: 0 - 255 + */ + u8 avg_weight_rssi_beacon; + + /* + * The weight for rssi/data frame average calculation + * + * Range: 0 - 255 + */ + u8 avg_weight_rssi_data; + + /* + * The weight for snr/beacon average calculation + * + * Range: 0 - 255 + */ + u8 avg_weight_snr_beacon; + + /* + * The weight for snr/data frame average calculation + * + * Range: 0 - 255 + */ + u8 avg_weight_snr_data; +}; + +struct conf_scan_settings { + /* + * The minimum time to wait on each channel for active scans + * + * Range: 0 - 65536 tu + */ + u16 min_dwell_time_active; + + /* + * The maximum time to wait on each channel for active scans + * + * Range: 0 - 65536 tu + */ + u16 max_dwell_time_active; + + /* + * The maximum time to wait on each channel for passive scans + * + * Range: 0 - 65536 tu + */ + u16 min_dwell_time_passive; + + /* + * The maximum time to wait on each channel for passive scans + * + * Range: 0 - 65536 tu + */ + u16 max_dwell_time_passive; + + /* + * Number of probe requests to transmit on each active scan channel + * + * Range: u8 + */ + u16 num_probe_reqs; + +}; + +/* these are number of channels on the band divided by two, rounded up */ +#define CONF_TX_PWR_COMPENSATION_LEN_2 7 +#define CONF_TX_PWR_COMPENSATION_LEN_5 18 + +struct conf_rf_settings { + /* + * Per channel power compensation for 2.4GHz + * + * Range: s8 + */ + u8 tx_per_channel_power_compensation_2[CONF_TX_PWR_COMPENSATION_LEN_2]; + + /* + * Per channel power compensation for 5GHz + * + * Range: s8 + */ + u8 tx_per_channel_power_compensation_5[CONF_TX_PWR_COMPENSATION_LEN_5]; +}; + +struct conf_drv_settings { + struct conf_sg_settings sg; + struct conf_rx_settings rx; + struct conf_tx_settings tx; + struct conf_conn_settings conn; + struct conf_itrim_settings itrim; + struct conf_pm_config_settings pm_config; + struct conf_roam_trigger_settings roam_trigger; + struct conf_scan_settings scan; + struct conf_rf_settings rf; +}; + +#endif diff --git a/drivers/net/wireless/wl12xx/debugfs.c b/drivers/net/wireless/wl12xx/debugfs.c new file mode 100644 index 00000000000..dd71b7d2105 --- /dev/null +++ b/drivers/net/wireless/wl12xx/debugfs.c @@ -0,0 +1,590 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 2009 Nokia Corporation + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include "debugfs.h" + +#include +#include + +#include "wl12xx.h" +#include "acx.h" +#include "ps.h" +#include "io.h" + +/* ms */ +#define WL1271_DEBUGFS_STATS_LIFETIME 1000 + +/* debugfs macros idea from mac80211 */ +#define DEBUGFS_FORMAT_BUFFER_SIZE 100 +static int wl1271_format_buffer(char __user *userbuf, size_t count, + loff_t *ppos, char *fmt, ...) +{ + va_list args; + char buf[DEBUGFS_FORMAT_BUFFER_SIZE]; + int res; + + va_start(args, fmt); + res = vscnprintf(buf, sizeof(buf), fmt, args); + va_end(args); + + return simple_read_from_buffer(userbuf, count, ppos, buf, res); +} + +#define DEBUGFS_READONLY_FILE(name, fmt, value...) \ +static ssize_t name## _read(struct file *file, char __user *userbuf, \ + size_t count, loff_t *ppos) \ +{ \ + struct wl1271 *wl = file->private_data; \ + return wl1271_format_buffer(userbuf, count, ppos, \ + fmt "\n", ##value); \ +} \ + \ +static const struct file_operations name## _ops = { \ + .read = name## _read, \ + .open = wl1271_open_file_generic, \ + .llseek = generic_file_llseek, \ +}; + +#define DEBUGFS_ADD(name, parent) \ + wl->debugfs.name = debugfs_create_file(#name, 0400, parent, \ + wl, &name## _ops); \ + if (IS_ERR(wl->debugfs.name)) { \ + ret = PTR_ERR(wl->debugfs.name); \ + wl->debugfs.name = NULL; \ + goto out; \ + } + +#define DEBUGFS_DEL(name) \ + do { \ + debugfs_remove(wl->debugfs.name); \ + wl->debugfs.name = NULL; \ + } while (0) + +#define DEBUGFS_FWSTATS_FILE(sub, name, fmt) \ +static ssize_t sub## _ ##name## _read(struct file *file, \ + char __user *userbuf, \ + size_t count, loff_t *ppos) \ +{ \ + struct wl1271 *wl = file->private_data; \ + \ + wl1271_debugfs_update_stats(wl); \ + \ + return wl1271_format_buffer(userbuf, count, ppos, fmt "\n", \ + wl->stats.fw_stats->sub.name); \ +} \ + \ +static const struct file_operations sub## _ ##name## _ops = { \ + .read = sub## _ ##name## _read, \ + .open = wl1271_open_file_generic, \ + .llseek = generic_file_llseek, \ +}; + +#define DEBUGFS_FWSTATS_ADD(sub, name) \ + DEBUGFS_ADD(sub## _ ##name, wl->debugfs.fw_statistics) + +#define DEBUGFS_FWSTATS_DEL(sub, name) \ + DEBUGFS_DEL(sub## _ ##name) + +static void wl1271_debugfs_update_stats(struct wl1271 *wl) +{ + int ret; + + mutex_lock(&wl->mutex); + + ret = wl1271_ps_elp_wakeup(wl, false); + if (ret < 0) + goto out; + + if (wl->state == WL1271_STATE_ON && + time_after(jiffies, wl->stats.fw_stats_update + + msecs_to_jiffies(WL1271_DEBUGFS_STATS_LIFETIME))) { + wl1271_acx_statistics(wl, wl->stats.fw_stats); + wl->stats.fw_stats_update = jiffies; + } + + wl1271_ps_elp_sleep(wl); + +out: + mutex_unlock(&wl->mutex); +} + +static int wl1271_open_file_generic(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + return 0; +} + +DEBUGFS_FWSTATS_FILE(tx, internal_desc_overflow, "%u"); + +DEBUGFS_FWSTATS_FILE(rx, out_of_mem, "%u"); +DEBUGFS_FWSTATS_FILE(rx, hdr_overflow, "%u"); +DEBUGFS_FWSTATS_FILE(rx, hw_stuck, "%u"); +DEBUGFS_FWSTATS_FILE(rx, dropped, "%u"); +DEBUGFS_FWSTATS_FILE(rx, fcs_err, "%u"); +DEBUGFS_FWSTATS_FILE(rx, xfr_hint_trig, "%u"); +DEBUGFS_FWSTATS_FILE(rx, path_reset, "%u"); +DEBUGFS_FWSTATS_FILE(rx, reset_counter, "%u"); + +DEBUGFS_FWSTATS_FILE(dma, rx_requested, "%u"); +DEBUGFS_FWSTATS_FILE(dma, rx_errors, "%u"); +DEBUGFS_FWSTATS_FILE(dma, tx_requested, "%u"); +DEBUGFS_FWSTATS_FILE(dma, tx_errors, "%u"); + +DEBUGFS_FWSTATS_FILE(isr, cmd_cmplt, "%u"); +DEBUGFS_FWSTATS_FILE(isr, fiqs, "%u"); +DEBUGFS_FWSTATS_FILE(isr, rx_headers, "%u"); +DEBUGFS_FWSTATS_FILE(isr, rx_mem_overflow, "%u"); +DEBUGFS_FWSTATS_FILE(isr, rx_rdys, "%u"); +DEBUGFS_FWSTATS_FILE(isr, irqs, "%u"); +DEBUGFS_FWSTATS_FILE(isr, tx_procs, "%u"); +DEBUGFS_FWSTATS_FILE(isr, decrypt_done, "%u"); +DEBUGFS_FWSTATS_FILE(isr, dma0_done, "%u"); +DEBUGFS_FWSTATS_FILE(isr, dma1_done, "%u"); +DEBUGFS_FWSTATS_FILE(isr, tx_exch_complete, "%u"); +DEBUGFS_FWSTATS_FILE(isr, commands, "%u"); +DEBUGFS_FWSTATS_FILE(isr, rx_procs, "%u"); +DEBUGFS_FWSTATS_FILE(isr, hw_pm_mode_changes, "%u"); +DEBUGFS_FWSTATS_FILE(isr, host_acknowledges, "%u"); +DEBUGFS_FWSTATS_FILE(isr, pci_pm, "%u"); +DEBUGFS_FWSTATS_FILE(isr, wakeups, "%u"); +DEBUGFS_FWSTATS_FILE(isr, low_rssi, "%u"); + +DEBUGFS_FWSTATS_FILE(wep, addr_key_count, "%u"); +DEBUGFS_FWSTATS_FILE(wep, default_key_count, "%u"); +/* skipping wep.reserved */ +DEBUGFS_FWSTATS_FILE(wep, key_not_found, "%u"); +DEBUGFS_FWSTATS_FILE(wep, decrypt_fail, "%u"); +DEBUGFS_FWSTATS_FILE(wep, packets, "%u"); +DEBUGFS_FWSTATS_FILE(wep, interrupt, "%u"); + +DEBUGFS_FWSTATS_FILE(pwr, ps_enter, "%u"); +DEBUGFS_FWSTATS_FILE(pwr, elp_enter, "%u"); +DEBUGFS_FWSTATS_FILE(pwr, missing_bcns, "%u"); +DEBUGFS_FWSTATS_FILE(pwr, wake_on_host, "%u"); +DEBUGFS_FWSTATS_FILE(pwr, wake_on_timer_exp, "%u"); +DEBUGFS_FWSTATS_FILE(pwr, tx_with_ps, "%u"); +DEBUGFS_FWSTATS_FILE(pwr, tx_without_ps, "%u"); +DEBUGFS_FWSTATS_FILE(pwr, rcvd_beacons, "%u"); +DEBUGFS_FWSTATS_FILE(pwr, power_save_off, "%u"); +DEBUGFS_FWSTATS_FILE(pwr, enable_ps, "%u"); +DEBUGFS_FWSTATS_FILE(pwr, disable_ps, "%u"); +DEBUGFS_FWSTATS_FILE(pwr, fix_tsf_ps, "%u"); +/* skipping cont_miss_bcns_spread for now */ +DEBUGFS_FWSTATS_FILE(pwr, rcvd_awake_beacons, "%u"); + +DEBUGFS_FWSTATS_FILE(mic, rx_pkts, "%u"); +DEBUGFS_FWSTATS_FILE(mic, calc_failure, "%u"); + +DEBUGFS_FWSTATS_FILE(aes, encrypt_fail, "%u"); +DEBUGFS_FWSTATS_FILE(aes, decrypt_fail, "%u"); +DEBUGFS_FWSTATS_FILE(aes, encrypt_packets, "%u"); +DEBUGFS_FWSTATS_FILE(aes, decrypt_packets, "%u"); +DEBUGFS_FWSTATS_FILE(aes, encrypt_interrupt, "%u"); +DEBUGFS_FWSTATS_FILE(aes, decrypt_interrupt, "%u"); + +DEBUGFS_FWSTATS_FILE(event, heart_beat, "%u"); +DEBUGFS_FWSTATS_FILE(event, calibration, "%u"); +DEBUGFS_FWSTATS_FILE(event, rx_mismatch, "%u"); +DEBUGFS_FWSTATS_FILE(event, rx_mem_empty, "%u"); +DEBUGFS_FWSTATS_FILE(event, rx_pool, "%u"); +DEBUGFS_FWSTATS_FILE(event, oom_late, "%u"); +DEBUGFS_FWSTATS_FILE(event, phy_transmit_error, "%u"); +DEBUGFS_FWSTATS_FILE(event, tx_stuck, "%u"); + +DEBUGFS_FWSTATS_FILE(ps, pspoll_timeouts, "%u"); +DEBUGFS_FWSTATS_FILE(ps, upsd_timeouts, "%u"); +DEBUGFS_FWSTATS_FILE(ps, upsd_max_sptime, "%u"); +DEBUGFS_FWSTATS_FILE(ps, upsd_max_apturn, "%u"); +DEBUGFS_FWSTATS_FILE(ps, pspoll_max_apturn, "%u"); +DEBUGFS_FWSTATS_FILE(ps, pspoll_utilization, "%u"); +DEBUGFS_FWSTATS_FILE(ps, upsd_utilization, "%u"); + +DEBUGFS_FWSTATS_FILE(rxpipe, rx_prep_beacon_drop, "%u"); +DEBUGFS_FWSTATS_FILE(rxpipe, descr_host_int_trig_rx_data, "%u"); +DEBUGFS_FWSTATS_FILE(rxpipe, beacon_buffer_thres_host_int_trig_rx_data, "%u"); +DEBUGFS_FWSTATS_FILE(rxpipe, missed_beacon_host_int_trig_rx_data, "%u"); +DEBUGFS_FWSTATS_FILE(rxpipe, tx_xfr_host_int_trig_rx_data, "%u"); + +DEBUGFS_READONLY_FILE(retry_count, "%u", wl->stats.retry_count); +DEBUGFS_READONLY_FILE(excessive_retries, "%u", + wl->stats.excessive_retries); + +static ssize_t tx_queue_len_read(struct file *file, char __user *userbuf, + size_t count, loff_t *ppos) +{ + struct wl1271 *wl = file->private_data; + u32 queue_len; + char buf[20]; + int res; + + queue_len = skb_queue_len(&wl->tx_queue); + + res = scnprintf(buf, sizeof(buf), "%u\n", queue_len); + return simple_read_from_buffer(userbuf, count, ppos, buf, res); +} + +static const struct file_operations tx_queue_len_ops = { + .read = tx_queue_len_read, + .open = wl1271_open_file_generic, + .llseek = default_llseek, +}; + +static ssize_t gpio_power_read(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct wl1271 *wl = file->private_data; + bool state = test_bit(WL1271_FLAG_GPIO_POWER, &wl->flags); + + int res; + char buf[10]; + + res = scnprintf(buf, sizeof(buf), "%d\n", state); + + return simple_read_from_buffer(user_buf, count, ppos, buf, res); +} + +static ssize_t gpio_power_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct wl1271 *wl = file->private_data; + char buf[10]; + size_t len; + unsigned long value; + int ret; + + mutex_lock(&wl->mutex); + + len = min(count, sizeof(buf) - 1); + if (copy_from_user(buf, user_buf, len)) { + ret = -EFAULT; + goto out; + } + buf[len] = '\0'; + + ret = strict_strtoul(buf, 0, &value); + if (ret < 0) { + wl1271_warning("illegal value in gpio_power"); + goto out; + } + + if (value) + wl1271_power_on(wl); + else + wl1271_power_off(wl); + +out: + mutex_unlock(&wl->mutex); + return count; +} + +static const struct file_operations gpio_power_ops = { + .read = gpio_power_read, + .write = gpio_power_write, + .open = wl1271_open_file_generic, + .llseek = default_llseek, +}; + +static void wl1271_debugfs_delete_files(struct wl1271 *wl) +{ + DEBUGFS_FWSTATS_DEL(tx, internal_desc_overflow); + + DEBUGFS_FWSTATS_DEL(rx, out_of_mem); + DEBUGFS_FWSTATS_DEL(rx, hdr_overflow); + DEBUGFS_FWSTATS_DEL(rx, hw_stuck); + DEBUGFS_FWSTATS_DEL(rx, dropped); + DEBUGFS_FWSTATS_DEL(rx, fcs_err); + DEBUGFS_FWSTATS_DEL(rx, xfr_hint_trig); + DEBUGFS_FWSTATS_DEL(rx, path_reset); + DEBUGFS_FWSTATS_DEL(rx, reset_counter); + + DEBUGFS_FWSTATS_DEL(dma, rx_requested); + DEBUGFS_FWSTATS_DEL(dma, rx_errors); + DEBUGFS_FWSTATS_DEL(dma, tx_requested); + DEBUGFS_FWSTATS_DEL(dma, tx_errors); + + DEBUGFS_FWSTATS_DEL(isr, cmd_cmplt); + DEBUGFS_FWSTATS_DEL(isr, fiqs); + DEBUGFS_FWSTATS_DEL(isr, rx_headers); + DEBUGFS_FWSTATS_DEL(isr, rx_mem_overflow); + DEBUGFS_FWSTATS_DEL(isr, rx_rdys); + DEBUGFS_FWSTATS_DEL(isr, irqs); + DEBUGFS_FWSTATS_DEL(isr, tx_procs); + DEBUGFS_FWSTATS_DEL(isr, decrypt_done); + DEBUGFS_FWSTATS_DEL(isr, dma0_done); + DEBUGFS_FWSTATS_DEL(isr, dma1_done); + DEBUGFS_FWSTATS_DEL(isr, tx_exch_complete); + DEBUGFS_FWSTATS_DEL(isr, commands); + DEBUGFS_FWSTATS_DEL(isr, rx_procs); + DEBUGFS_FWSTATS_DEL(isr, hw_pm_mode_changes); + DEBUGFS_FWSTATS_DEL(isr, host_acknowledges); + DEBUGFS_FWSTATS_DEL(isr, pci_pm); + DEBUGFS_FWSTATS_DEL(isr, wakeups); + DEBUGFS_FWSTATS_DEL(isr, low_rssi); + + DEBUGFS_FWSTATS_DEL(wep, addr_key_count); + DEBUGFS_FWSTATS_DEL(wep, default_key_count); + /* skipping wep.reserved */ + DEBUGFS_FWSTATS_DEL(wep, key_not_found); + DEBUGFS_FWSTATS_DEL(wep, decrypt_fail); + DEBUGFS_FWSTATS_DEL(wep, packets); + DEBUGFS_FWSTATS_DEL(wep, interrupt); + + DEBUGFS_FWSTATS_DEL(pwr, ps_enter); + DEBUGFS_FWSTATS_DEL(pwr, elp_enter); + DEBUGFS_FWSTATS_DEL(pwr, missing_bcns); + DEBUGFS_FWSTATS_DEL(pwr, wake_on_host); + DEBUGFS_FWSTATS_DEL(pwr, wake_on_timer_exp); + DEBUGFS_FWSTATS_DEL(pwr, tx_with_ps); + DEBUGFS_FWSTATS_DEL(pwr, tx_without_ps); + DEBUGFS_FWSTATS_DEL(pwr, rcvd_beacons); + DEBUGFS_FWSTATS_DEL(pwr, power_save_off); + DEBUGFS_FWSTATS_DEL(pwr, enable_ps); + DEBUGFS_FWSTATS_DEL(pwr, disable_ps); + DEBUGFS_FWSTATS_DEL(pwr, fix_tsf_ps); + /* skipping cont_miss_bcns_spread for now */ + DEBUGFS_FWSTATS_DEL(pwr, rcvd_awake_beacons); + + DEBUGFS_FWSTATS_DEL(mic, rx_pkts); + DEBUGFS_FWSTATS_DEL(mic, calc_failure); + + DEBUGFS_FWSTATS_DEL(aes, encrypt_fail); + DEBUGFS_FWSTATS_DEL(aes, decrypt_fail); + DEBUGFS_FWSTATS_DEL(aes, encrypt_packets); + DEBUGFS_FWSTATS_DEL(aes, decrypt_packets); + DEBUGFS_FWSTATS_DEL(aes, encrypt_interrupt); + DEBUGFS_FWSTATS_DEL(aes, decrypt_interrupt); + + DEBUGFS_FWSTATS_DEL(event, heart_beat); + DEBUGFS_FWSTATS_DEL(event, calibration); + DEBUGFS_FWSTATS_DEL(event, rx_mismatch); + DEBUGFS_FWSTATS_DEL(event, rx_mem_empty); + DEBUGFS_FWSTATS_DEL(event, rx_pool); + DEBUGFS_FWSTATS_DEL(event, oom_late); + DEBUGFS_FWSTATS_DEL(event, phy_transmit_error); + DEBUGFS_FWSTATS_DEL(event, tx_stuck); + + DEBUGFS_FWSTATS_DEL(ps, pspoll_timeouts); + DEBUGFS_FWSTATS_DEL(ps, upsd_timeouts); + DEBUGFS_FWSTATS_DEL(ps, upsd_max_sptime); + DEBUGFS_FWSTATS_DEL(ps, upsd_max_apturn); + DEBUGFS_FWSTATS_DEL(ps, pspoll_max_apturn); + DEBUGFS_FWSTATS_DEL(ps, pspoll_utilization); + DEBUGFS_FWSTATS_DEL(ps, upsd_utilization); + + DEBUGFS_FWSTATS_DEL(rxpipe, rx_prep_beacon_drop); + DEBUGFS_FWSTATS_DEL(rxpipe, descr_host_int_trig_rx_data); + DEBUGFS_FWSTATS_DEL(rxpipe, beacon_buffer_thres_host_int_trig_rx_data); + DEBUGFS_FWSTATS_DEL(rxpipe, missed_beacon_host_int_trig_rx_data); + DEBUGFS_FWSTATS_DEL(rxpipe, tx_xfr_host_int_trig_rx_data); + + DEBUGFS_DEL(tx_queue_len); + DEBUGFS_DEL(retry_count); + DEBUGFS_DEL(excessive_retries); + + DEBUGFS_DEL(gpio_power); +} + +static int wl1271_debugfs_add_files(struct wl1271 *wl) +{ + int ret = 0; + + DEBUGFS_FWSTATS_ADD(tx, internal_desc_overflow); + + DEBUGFS_FWSTATS_ADD(rx, out_of_mem); + DEBUGFS_FWSTATS_ADD(rx, hdr_overflow); + DEBUGFS_FWSTATS_ADD(rx, hw_stuck); + DEBUGFS_FWSTATS_ADD(rx, dropped); + DEBUGFS_FWSTATS_ADD(rx, fcs_err); + DEBUGFS_FWSTATS_ADD(rx, xfr_hint_trig); + DEBUGFS_FWSTATS_ADD(rx, path_reset); + DEBUGFS_FWSTATS_ADD(rx, reset_counter); + + DEBUGFS_FWSTATS_ADD(dma, rx_requested); + DEBUGFS_FWSTATS_ADD(dma, rx_errors); + DEBUGFS_FWSTATS_ADD(dma, tx_requested); + DEBUGFS_FWSTATS_ADD(dma, tx_errors); + + DEBUGFS_FWSTATS_ADD(isr, cmd_cmplt); + DEBUGFS_FWSTATS_ADD(isr, fiqs); + DEBUGFS_FWSTATS_ADD(isr, rx_headers); + DEBUGFS_FWSTATS_ADD(isr, rx_mem_overflow); + DEBUGFS_FWSTATS_ADD(isr, rx_rdys); + DEBUGFS_FWSTATS_ADD(isr, irqs); + DEBUGFS_FWSTATS_ADD(isr, tx_procs); + DEBUGFS_FWSTATS_ADD(isr, decrypt_done); + DEBUGFS_FWSTATS_ADD(isr, dma0_done); + DEBUGFS_FWSTATS_ADD(isr, dma1_done); + DEBUGFS_FWSTATS_ADD(isr, tx_exch_complete); + DEBUGFS_FWSTATS_ADD(isr, commands); + DEBUGFS_FWSTATS_ADD(isr, rx_procs); + DEBUGFS_FWSTATS_ADD(isr, hw_pm_mode_changes); + DEBUGFS_FWSTATS_ADD(isr, host_acknowledges); + DEBUGFS_FWSTATS_ADD(isr, pci_pm); + DEBUGFS_FWSTATS_ADD(isr, wakeups); + DEBUGFS_FWSTATS_ADD(isr, low_rssi); + + DEBUGFS_FWSTATS_ADD(wep, addr_key_count); + DEBUGFS_FWSTATS_ADD(wep, default_key_count); + /* skipping wep.reserved */ + DEBUGFS_FWSTATS_ADD(wep, key_not_found); + DEBUGFS_FWSTATS_ADD(wep, decrypt_fail); + DEBUGFS_FWSTATS_ADD(wep, packets); + DEBUGFS_FWSTATS_ADD(wep, interrupt); + + DEBUGFS_FWSTATS_ADD(pwr, ps_enter); + DEBUGFS_FWSTATS_ADD(pwr, elp_enter); + DEBUGFS_FWSTATS_ADD(pwr, missing_bcns); + DEBUGFS_FWSTATS_ADD(pwr, wake_on_host); + DEBUGFS_FWSTATS_ADD(pwr, wake_on_timer_exp); + DEBUGFS_FWSTATS_ADD(pwr, tx_with_ps); + DEBUGFS_FWSTATS_ADD(pwr, tx_without_ps); + DEBUGFS_FWSTATS_ADD(pwr, rcvd_beacons); + DEBUGFS_FWSTATS_ADD(pwr, power_save_off); + DEBUGFS_FWSTATS_ADD(pwr, enable_ps); + DEBUGFS_FWSTATS_ADD(pwr, disable_ps); + DEBUGFS_FWSTATS_ADD(pwr, fix_tsf_ps); + /* skipping cont_miss_bcns_spread for now */ + DEBUGFS_FWSTATS_ADD(pwr, rcvd_awake_beacons); + + DEBUGFS_FWSTATS_ADD(mic, rx_pkts); + DEBUGFS_FWSTATS_ADD(mic, calc_failure); + + DEBUGFS_FWSTATS_ADD(aes, encrypt_fail); + DEBUGFS_FWSTATS_ADD(aes, decrypt_fail); + DEBUGFS_FWSTATS_ADD(aes, encrypt_packets); + DEBUGFS_FWSTATS_ADD(aes, decrypt_packets); + DEBUGFS_FWSTATS_ADD(aes, encrypt_interrupt); + DEBUGFS_FWSTATS_ADD(aes, decrypt_interrupt); + + DEBUGFS_FWSTATS_ADD(event, heart_beat); + DEBUGFS_FWSTATS_ADD(event, calibration); + DEBUGFS_FWSTATS_ADD(event, rx_mismatch); + DEBUGFS_FWSTATS_ADD(event, rx_mem_empty); + DEBUGFS_FWSTATS_ADD(event, rx_pool); + DEBUGFS_FWSTATS_ADD(event, oom_late); + DEBUGFS_FWSTATS_ADD(event, phy_transmit_error); + DEBUGFS_FWSTATS_ADD(event, tx_stuck); + + DEBUGFS_FWSTATS_ADD(ps, pspoll_timeouts); + DEBUGFS_FWSTATS_ADD(ps, upsd_timeouts); + DEBUGFS_FWSTATS_ADD(ps, upsd_max_sptime); + DEBUGFS_FWSTATS_ADD(ps, upsd_max_apturn); + DEBUGFS_FWSTATS_ADD(ps, pspoll_max_apturn); + DEBUGFS_FWSTATS_ADD(ps, pspoll_utilization); + DEBUGFS_FWSTATS_ADD(ps, upsd_utilization); + + DEBUGFS_FWSTATS_ADD(rxpipe, rx_prep_beacon_drop); + DEBUGFS_FWSTATS_ADD(rxpipe, descr_host_int_trig_rx_data); + DEBUGFS_FWSTATS_ADD(rxpipe, beacon_buffer_thres_host_int_trig_rx_data); + DEBUGFS_FWSTATS_ADD(rxpipe, missed_beacon_host_int_trig_rx_data); + DEBUGFS_FWSTATS_ADD(rxpipe, tx_xfr_host_int_trig_rx_data); + + DEBUGFS_ADD(tx_queue_len, wl->debugfs.rootdir); + DEBUGFS_ADD(retry_count, wl->debugfs.rootdir); + DEBUGFS_ADD(excessive_retries, wl->debugfs.rootdir); + + DEBUGFS_ADD(gpio_power, wl->debugfs.rootdir); + +out: + if (ret < 0) + wl1271_debugfs_delete_files(wl); + + return ret; +} + +void wl1271_debugfs_reset(struct wl1271 *wl) +{ + memset(wl->stats.fw_stats, 0, sizeof(*wl->stats.fw_stats)); + wl->stats.retry_count = 0; + wl->stats.excessive_retries = 0; +} + +int wl1271_debugfs_init(struct wl1271 *wl) +{ + int ret; + + wl->debugfs.rootdir = debugfs_create_dir(KBUILD_MODNAME, NULL); + + if (IS_ERR(wl->debugfs.rootdir)) { + ret = PTR_ERR(wl->debugfs.rootdir); + wl->debugfs.rootdir = NULL; + goto err; + } + + wl->debugfs.fw_statistics = debugfs_create_dir("fw-statistics", + wl->debugfs.rootdir); + + if (IS_ERR(wl->debugfs.fw_statistics)) { + ret = PTR_ERR(wl->debugfs.fw_statistics); + wl->debugfs.fw_statistics = NULL; + goto err_root; + } + + wl->stats.fw_stats = kzalloc(sizeof(*wl->stats.fw_stats), + GFP_KERNEL); + + if (!wl->stats.fw_stats) { + ret = -ENOMEM; + goto err_fw; + } + + wl->stats.fw_stats_update = jiffies; + + ret = wl1271_debugfs_add_files(wl); + + if (ret < 0) + goto err_file; + + return 0; + +err_file: + kfree(wl->stats.fw_stats); + wl->stats.fw_stats = NULL; + +err_fw: + debugfs_remove(wl->debugfs.fw_statistics); + wl->debugfs.fw_statistics = NULL; + +err_root: + debugfs_remove(wl->debugfs.rootdir); + wl->debugfs.rootdir = NULL; + +err: + return ret; +} + +void wl1271_debugfs_exit(struct wl1271 *wl) +{ + wl1271_debugfs_delete_files(wl); + + kfree(wl->stats.fw_stats); + wl->stats.fw_stats = NULL; + + debugfs_remove(wl->debugfs.fw_statistics); + wl->debugfs.fw_statistics = NULL; + + debugfs_remove(wl->debugfs.rootdir); + wl->debugfs.rootdir = NULL; + +} diff --git a/drivers/net/wireless/wl12xx/debugfs.h b/drivers/net/wireless/wl12xx/debugfs.h new file mode 100644 index 00000000000..254c5b292cf --- /dev/null +++ b/drivers/net/wireless/wl12xx/debugfs.h @@ -0,0 +1,33 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 2009 Nokia Corporation + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __DEBUGFS_H__ +#define __DEBUGFS_H__ + +#include "wl12xx.h" + +int wl1271_debugfs_init(struct wl1271 *wl); +void wl1271_debugfs_exit(struct wl1271 *wl); +void wl1271_debugfs_reset(struct wl1271 *wl); + +#endif /* WL1271_DEBUGFS_H */ diff --git a/drivers/net/wireless/wl12xx/event.c b/drivers/net/wireless/wl12xx/event.c new file mode 100644 index 00000000000..f9146f5242f --- /dev/null +++ b/drivers/net/wireless/wl12xx/event.c @@ -0,0 +1,293 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include "wl12xx.h" +#include "reg.h" +#include "io.h" +#include "event.h" +#include "ps.h" +#include "scan.h" +#include "wl12xx_80211.h" + +void wl1271_pspoll_work(struct work_struct *work) +{ + struct delayed_work *dwork; + struct wl1271 *wl; + + dwork = container_of(work, struct delayed_work, work); + wl = container_of(dwork, struct wl1271, pspoll_work); + + wl1271_debug(DEBUG_EVENT, "pspoll work"); + + mutex_lock(&wl->mutex); + + if (unlikely(wl->state == WL1271_STATE_OFF)) + goto out; + + if (!test_and_clear_bit(WL1271_FLAG_PSPOLL_FAILURE, &wl->flags)) + goto out; + + if (!test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags)) + goto out; + + /* + * if we end up here, then we were in powersave when the pspoll + * delivery failure occurred, and no-one changed state since, so + * we should go back to powersave. + */ + wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE, wl->basic_rate, true); + +out: + mutex_unlock(&wl->mutex); +}; + +static void wl1271_event_pspoll_delivery_fail(struct wl1271 *wl) +{ + int delay = wl->conf.conn.ps_poll_recovery_period; + int ret; + + wl->ps_poll_failures++; + if (wl->ps_poll_failures == 1) + wl1271_info("AP with dysfunctional ps-poll, " + "trying to work around it."); + + /* force active mode receive data from the AP */ + if (test_bit(WL1271_FLAG_PSM, &wl->flags)) { + ret = wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE, + wl->basic_rate, true); + if (ret < 0) + return; + set_bit(WL1271_FLAG_PSPOLL_FAILURE, &wl->flags); + ieee80211_queue_delayed_work(wl->hw, &wl->pspoll_work, + msecs_to_jiffies(delay)); + } + + /* + * If already in active mode, lets we should be getting data from + * the AP right away. If we enter PSM too fast after this, and data + * remains on the AP, we will get another event like this, and we'll + * go into active once more. + */ +} + +static int wl1271_event_ps_report(struct wl1271 *wl, + struct event_mailbox *mbox, + bool *beacon_loss) +{ + int ret = 0; + u32 total_retries = wl->conf.conn.psm_entry_retries; + + wl1271_debug(DEBUG_EVENT, "ps_status: 0x%x", mbox->ps_status); + + switch (mbox->ps_status) { + case EVENT_ENTER_POWER_SAVE_FAIL: + wl1271_debug(DEBUG_PSM, "PSM entry failed"); + + if (!test_bit(WL1271_FLAG_PSM, &wl->flags)) { + /* remain in active mode */ + wl->psm_entry_retry = 0; + break; + } + + if (wl->psm_entry_retry < total_retries) { + wl->psm_entry_retry++; + ret = wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE, + wl->basic_rate, true); + } else { + wl1271_info("No ack to nullfunc from AP."); + wl->psm_entry_retry = 0; + *beacon_loss = true; + } + break; + case EVENT_ENTER_POWER_SAVE_SUCCESS: + wl->psm_entry_retry = 0; + + /* enable beacon filtering */ + ret = wl1271_acx_beacon_filter_opt(wl, true); + if (ret < 0) + break; + + /* enable beacon early termination */ + ret = wl1271_acx_bet_enable(wl, true); + if (ret < 0) + break; + + /* go to extremely low power mode */ + wl1271_ps_elp_sleep(wl); + break; + case EVENT_EXIT_POWER_SAVE_FAIL: + wl1271_debug(DEBUG_PSM, "PSM exit failed"); + + if (test_bit(WL1271_FLAG_PSM, &wl->flags)) { + wl->psm_entry_retry = 0; + break; + } + + /* make sure the firmware goes to active mode - the frame to + be sent next will indicate to the AP, that we are active. */ + ret = wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE, + wl->basic_rate, false); + break; + case EVENT_EXIT_POWER_SAVE_SUCCESS: + default: + break; + } + + return ret; +} + +static void wl1271_event_rssi_trigger(struct wl1271 *wl, + struct event_mailbox *mbox) +{ + enum nl80211_cqm_rssi_threshold_event event; + s8 metric = mbox->rssi_snr_trigger_metric[0]; + + wl1271_debug(DEBUG_EVENT, "RSSI trigger metric: %d", metric); + + if (metric <= wl->rssi_thold) + event = NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW; + else + event = NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH; + + if (event != wl->last_rssi_event) + ieee80211_cqm_rssi_notify(wl->vif, event, GFP_KERNEL); + wl->last_rssi_event = event; +} + +static void wl1271_event_mbox_dump(struct event_mailbox *mbox) +{ + wl1271_debug(DEBUG_EVENT, "MBOX DUMP:"); + wl1271_debug(DEBUG_EVENT, "\tvector: 0x%x", mbox->events_vector); + wl1271_debug(DEBUG_EVENT, "\tmask: 0x%x", mbox->events_mask); +} + +static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox) +{ + int ret; + u32 vector; + bool beacon_loss = false; + + wl1271_event_mbox_dump(mbox); + + vector = le32_to_cpu(mbox->events_vector); + vector &= ~(le32_to_cpu(mbox->events_mask)); + wl1271_debug(DEBUG_EVENT, "vector: 0x%x", vector); + + if (vector & SCAN_COMPLETE_EVENT_ID) { + wl1271_debug(DEBUG_EVENT, "status: 0x%x", + mbox->scheduled_scan_status); + + wl1271_scan_stm(wl); + } + + /* disable dynamic PS when requested by the firmware */ + if (vector & SOFT_GEMINI_SENSE_EVENT_ID && + wl->bss_type == BSS_TYPE_STA_BSS) { + if (mbox->soft_gemini_sense_info) + ieee80211_disable_dyn_ps(wl->vif); + else + ieee80211_enable_dyn_ps(wl->vif); + } + + /* + * The BSS_LOSE_EVENT_ID is only needed while psm (and hence beacon + * filtering) is enabled. Without PSM, the stack will receive all + * beacons and can detect beacon loss by itself. + * + * As there's possibility that the driver disables PSM before receiving + * BSS_LOSE_EVENT, beacon loss has to be reported to the stack. + * + */ + if (vector & BSS_LOSE_EVENT_ID) { + wl1271_info("Beacon loss detected."); + + /* indicate to the stack, that beacons have been lost */ + beacon_loss = true; + } + + if (vector & PS_REPORT_EVENT_ID) { + wl1271_debug(DEBUG_EVENT, "PS_REPORT_EVENT"); + ret = wl1271_event_ps_report(wl, mbox, &beacon_loss); + if (ret < 0) + return ret; + } + + if (vector & PSPOLL_DELIVERY_FAILURE_EVENT_ID) + wl1271_event_pspoll_delivery_fail(wl); + + if (vector & RSSI_SNR_TRIGGER_0_EVENT_ID) { + wl1271_debug(DEBUG_EVENT, "RSSI_SNR_TRIGGER_0_EVENT"); + if (wl->vif) + wl1271_event_rssi_trigger(wl, mbox); + } + + if (wl->vif && beacon_loss) + ieee80211_connection_loss(wl->vif); + + return 0; +} + +int wl1271_event_unmask(struct wl1271 *wl) +{ + int ret; + + ret = wl1271_acx_event_mbox_mask(wl, ~(wl->event_mask)); + if (ret < 0) + return ret; + + return 0; +} + +void wl1271_event_mbox_config(struct wl1271 *wl) +{ + wl->mbox_ptr[0] = wl1271_read32(wl, REG_EVENT_MAILBOX_PTR); + wl->mbox_ptr[1] = wl->mbox_ptr[0] + sizeof(struct event_mailbox); + + wl1271_debug(DEBUG_EVENT, "MBOX ptrs: 0x%x 0x%x", + wl->mbox_ptr[0], wl->mbox_ptr[1]); +} + +int wl1271_event_handle(struct wl1271 *wl, u8 mbox_num) +{ + struct event_mailbox mbox; + int ret; + + wl1271_debug(DEBUG_EVENT, "EVENT on mbox %d", mbox_num); + + if (mbox_num > 1) + return -EINVAL; + + /* first we read the mbox descriptor */ + wl1271_read(wl, wl->mbox_ptr[mbox_num], &mbox, + sizeof(struct event_mailbox), false); + + /* process the descriptor */ + ret = wl1271_event_process(wl, &mbox); + if (ret < 0) + return ret; + + /* then we let the firmware know it can go on...*/ + wl1271_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_EVENT_ACK); + + return 0; +} diff --git a/drivers/net/wireless/wl12xx/event.h b/drivers/net/wireless/wl12xx/event.h new file mode 100644 index 00000000000..6cce0143adb --- /dev/null +++ b/drivers/net/wireless/wl12xx/event.h @@ -0,0 +1,126 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 1998-2009 Texas Instruments. All rights reserved. + * Copyright (C) 2008-2009 Nokia Corporation + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __EVENT_H__ +#define __EVENT_H__ + +/* + * Mbox events + * + * The event mechanism is based on a pair of event buffers (buffers A and + * B) at fixed locations in the target's memory. The host processes one + * buffer while the other buffer continues to collect events. If the host + * is not processing events, an interrupt is issued to signal that a buffer + * is ready. Once the host is done with processing events from one buffer, + * it signals the target (with an ACK interrupt) that the event buffer is + * free. + */ + +enum { + RSSI_SNR_TRIGGER_0_EVENT_ID = BIT(0), + RSSI_SNR_TRIGGER_1_EVENT_ID = BIT(1), + RSSI_SNR_TRIGGER_2_EVENT_ID = BIT(2), + RSSI_SNR_TRIGGER_3_EVENT_ID = BIT(3), + RSSI_SNR_TRIGGER_4_EVENT_ID = BIT(4), + RSSI_SNR_TRIGGER_5_EVENT_ID = BIT(5), + RSSI_SNR_TRIGGER_6_EVENT_ID = BIT(6), + RSSI_SNR_TRIGGER_7_EVENT_ID = BIT(7), + MEASUREMENT_START_EVENT_ID = BIT(8), + MEASUREMENT_COMPLETE_EVENT_ID = BIT(9), + SCAN_COMPLETE_EVENT_ID = BIT(10), + SCHEDULED_SCAN_COMPLETE_EVENT_ID = BIT(11), + AP_DISCOVERY_COMPLETE_EVENT_ID = BIT(12), + PS_REPORT_EVENT_ID = BIT(13), + PSPOLL_DELIVERY_FAILURE_EVENT_ID = BIT(14), + DISCONNECT_EVENT_COMPLETE_ID = BIT(15), + JOIN_EVENT_COMPLETE_ID = BIT(16), + CHANNEL_SWITCH_COMPLETE_EVENT_ID = BIT(17), + BSS_LOSE_EVENT_ID = BIT(18), + REGAINED_BSS_EVENT_ID = BIT(19), + ROAMING_TRIGGER_MAX_TX_RETRY_EVENT_ID = BIT(20), + SOFT_GEMINI_SENSE_EVENT_ID = BIT(22), + SOFT_GEMINI_PREDICTION_EVENT_ID = BIT(23), + SOFT_GEMINI_AVALANCHE_EVENT_ID = BIT(24), + PLT_RX_CALIBRATION_COMPLETE_EVENT_ID = BIT(25), + DBG_EVENT_ID = BIT(26), + HEALTH_CHECK_REPLY_EVENT_ID = BIT(27), + PERIODIC_SCAN_COMPLETE_EVENT_ID = BIT(28), + PERIODIC_SCAN_REPORT_EVENT_ID = BIT(29), + BA_SESSION_TEAR_DOWN_EVENT_ID = BIT(30), + EVENT_MBOX_ALL_EVENT_ID = 0x7fffffff, +}; + +enum { + EVENT_ENTER_POWER_SAVE_FAIL = 0, + EVENT_ENTER_POWER_SAVE_SUCCESS, + EVENT_EXIT_POWER_SAVE_FAIL, + EVENT_EXIT_POWER_SAVE_SUCCESS, +}; + +struct event_debug_report { + u8 debug_event_id; + u8 num_params; + __le16 pad; + __le32 report_1; + __le32 report_2; + __le32 report_3; +} __packed; + +#define NUM_OF_RSSI_SNR_TRIGGERS 8 + +struct event_mailbox { + __le32 events_vector; + __le32 events_mask; + __le32 reserved_1; + __le32 reserved_2; + + u8 dbg_event_id; + u8 num_relevant_params; + __le16 reserved_3; + __le32 event_report_p1; + __le32 event_report_p2; + __le32 event_report_p3; + + u8 number_of_scan_results; + u8 scan_tag; + u8 reserved_4[2]; + __le32 compl_scheduled_scan_status; + + __le16 scheduled_scan_attended_channels; + u8 soft_gemini_sense_info; + u8 soft_gemini_protective_info; + s8 rssi_snr_trigger_metric[NUM_OF_RSSI_SNR_TRIGGERS]; + u8 channel_switch_status; + u8 scheduled_scan_status; + u8 ps_status; + + u8 reserved_5[29]; +} __packed; + +int wl1271_event_unmask(struct wl1271 *wl); +void wl1271_event_mbox_config(struct wl1271 *wl); +int wl1271_event_handle(struct wl1271 *wl, u8 mbox); +void wl1271_pspoll_work(struct work_struct *work); + +#endif diff --git a/drivers/net/wireless/wl12xx/ini.h b/drivers/net/wireless/wl12xx/ini.h new file mode 100644 index 00000000000..c330a2583df --- /dev/null +++ b/drivers/net/wireless/wl12xx/ini.h @@ -0,0 +1,123 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 2010 Nokia Corporation + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __INI_H__ +#define __INI_H__ + +#define WL1271_INI_MAX_SMART_REFLEX_PARAM 16 + +struct wl1271_ini_general_params { + u8 ref_clock; + u8 settling_time; + u8 clk_valid_on_wakeup; + u8 dc2dc_mode; + u8 dual_mode_select; + u8 tx_bip_fem_auto_detect; + u8 tx_bip_fem_manufacturer; + u8 general_settings; + u8 sr_state; + u8 srf1[WL1271_INI_MAX_SMART_REFLEX_PARAM]; + u8 srf2[WL1271_INI_MAX_SMART_REFLEX_PARAM]; + u8 srf3[WL1271_INI_MAX_SMART_REFLEX_PARAM]; +} __packed; + +#define WL1271_INI_RSSI_PROCESS_COMPENS_SIZE 15 + +struct wl1271_ini_band_params_2 { + u8 rx_trace_insertion_loss; + u8 tx_trace_loss; + u8 rx_rssi_process_compens[WL1271_INI_RSSI_PROCESS_COMPENS_SIZE]; +} __packed; + +#define WL1271_INI_RATE_GROUP_COUNT 6 +#define WL1271_INI_CHANNEL_COUNT_2 14 + +struct wl1271_ini_fem_params_2 { + __le16 tx_bip_ref_pd_voltage; + u8 tx_bip_ref_power; + u8 tx_bip_ref_offset; + u8 tx_per_rate_pwr_limits_normal[WL1271_INI_RATE_GROUP_COUNT]; + u8 tx_per_rate_pwr_limits_degraded[WL1271_INI_RATE_GROUP_COUNT]; + u8 tx_per_rate_pwr_limits_extreme[WL1271_INI_RATE_GROUP_COUNT]; + u8 tx_per_chan_pwr_limits_11b[WL1271_INI_CHANNEL_COUNT_2]; + u8 tx_per_chan_pwr_limits_ofdm[WL1271_INI_CHANNEL_COUNT_2]; + u8 tx_pd_vs_rate_offsets[WL1271_INI_RATE_GROUP_COUNT]; + u8 tx_ibias[WL1271_INI_RATE_GROUP_COUNT]; + u8 rx_fem_insertion_loss; + u8 degraded_low_to_normal_thr; + u8 normal_to_degraded_high_thr; +} __packed; + +#define WL1271_INI_CHANNEL_COUNT_5 35 +#define WL1271_INI_SUB_BAND_COUNT_5 7 + +struct wl1271_ini_band_params_5 { + u8 rx_trace_insertion_loss[WL1271_INI_SUB_BAND_COUNT_5]; + u8 tx_trace_loss[WL1271_INI_SUB_BAND_COUNT_5]; + u8 rx_rssi_process_compens[WL1271_INI_RSSI_PROCESS_COMPENS_SIZE]; +} __packed; + +struct wl1271_ini_fem_params_5 { + __le16 tx_bip_ref_pd_voltage[WL1271_INI_SUB_BAND_COUNT_5]; + u8 tx_bip_ref_power[WL1271_INI_SUB_BAND_COUNT_5]; + u8 tx_bip_ref_offset[WL1271_INI_SUB_BAND_COUNT_5]; + u8 tx_per_rate_pwr_limits_normal[WL1271_INI_RATE_GROUP_COUNT]; + u8 tx_per_rate_pwr_limits_degraded[WL1271_INI_RATE_GROUP_COUNT]; + u8 tx_per_rate_pwr_limits_extreme[WL1271_INI_RATE_GROUP_COUNT]; + u8 tx_per_chan_pwr_limits_ofdm[WL1271_INI_CHANNEL_COUNT_5]; + u8 tx_pd_vs_rate_offsets[WL1271_INI_RATE_GROUP_COUNT]; + u8 tx_ibias[WL1271_INI_RATE_GROUP_COUNT]; + u8 rx_fem_insertion_loss[WL1271_INI_SUB_BAND_COUNT_5]; + u8 degraded_low_to_normal_thr; + u8 normal_to_degraded_high_thr; +} __packed; + + +/* NVS data structure */ +#define WL1271_INI_NVS_SECTION_SIZE 468 +#define WL1271_INI_FEM_MODULE_COUNT 2 + +#define WL1271_INI_LEGACY_NVS_FILE_SIZE 800 + +struct wl1271_nvs_file { + /* NVS section */ + u8 nvs[WL1271_INI_NVS_SECTION_SIZE]; + + /* INI section */ + struct wl1271_ini_general_params general_params; + u8 padding1; + struct wl1271_ini_band_params_2 stat_radio_params_2; + u8 padding2; + struct { + struct wl1271_ini_fem_params_2 params; + u8 padding; + } dyn_radio_params_2[WL1271_INI_FEM_MODULE_COUNT]; + struct wl1271_ini_band_params_5 stat_radio_params_5; + u8 padding3; + struct { + struct wl1271_ini_fem_params_5 params; + u8 padding; + } dyn_radio_params_5[WL1271_INI_FEM_MODULE_COUNT]; +} __packed; + +#endif diff --git a/drivers/net/wireless/wl12xx/init.c b/drivers/net/wireless/wl12xx/init.c new file mode 100644 index 00000000000..492edc0f7ac --- /dev/null +++ b/drivers/net/wireless/wl12xx/init.c @@ -0,0 +1,369 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 2009 Nokia Corporation + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include +#include + +#include "init.h" +#include "wl12xx_80211.h" +#include "acx.h" +#include "cmd.h" +#include "reg.h" + +static int wl1271_init_hwenc_config(struct wl1271 *wl) +{ + int ret; + + ret = wl1271_acx_feature_cfg(wl); + if (ret < 0) { + wl1271_warning("couldn't set feature config"); + return ret; + } + + ret = wl1271_cmd_set_default_wep_key(wl, wl->default_key); + if (ret < 0) { + wl1271_warning("couldn't set default key"); + return ret; + } + + return 0; +} + +int wl1271_init_templates_config(struct wl1271 *wl) +{ + int ret, i; + size_t size; + + /* send empty templates for fw memory reservation */ + ret = wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_2_4, NULL, + sizeof(struct wl12xx_probe_req_template), + 0, WL1271_RATE_AUTOMATIC); + if (ret < 0) + return ret; + + size = sizeof(struct wl12xx_probe_req_template); + ret = wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_5, + NULL, size, 0, + WL1271_RATE_AUTOMATIC); + if (ret < 0) + return ret; + + ret = wl1271_cmd_template_set(wl, CMD_TEMPL_NULL_DATA, NULL, + sizeof(struct wl12xx_null_data_template), + 0, WL1271_RATE_AUTOMATIC); + if (ret < 0) + return ret; + + ret = wl1271_cmd_template_set(wl, CMD_TEMPL_PS_POLL, NULL, + sizeof(struct wl12xx_ps_poll_template), + 0, WL1271_RATE_AUTOMATIC); + if (ret < 0) + return ret; + + ret = wl1271_cmd_template_set(wl, CMD_TEMPL_QOS_NULL_DATA, NULL, + sizeof + (struct wl12xx_qos_null_data_template), + 0, WL1271_RATE_AUTOMATIC); + if (ret < 0) + return ret; + + ret = wl1271_cmd_template_set(wl, CMD_TEMPL_PROBE_RESPONSE, NULL, + sizeof + (struct wl12xx_probe_resp_template), + 0, WL1271_RATE_AUTOMATIC); + if (ret < 0) + return ret; + + ret = wl1271_cmd_template_set(wl, CMD_TEMPL_BEACON, NULL, + sizeof + (struct wl12xx_beacon_template), + 0, WL1271_RATE_AUTOMATIC); + if (ret < 0) + return ret; + + for (i = 0; i < CMD_TEMPL_KLV_IDX_MAX; i++) { + ret = wl1271_cmd_template_set(wl, CMD_TEMPL_KLV, NULL, + WL1271_CMD_TEMPL_MAX_SIZE, i, + WL1271_RATE_AUTOMATIC); + if (ret < 0) + return ret; + } + + return 0; +} + +static int wl1271_init_rx_config(struct wl1271 *wl, u32 config, u32 filter) +{ + int ret; + + ret = wl1271_acx_rx_msdu_life_time(wl); + if (ret < 0) + return ret; + + ret = wl1271_acx_rx_config(wl, config, filter); + if (ret < 0) + return ret; + + return 0; +} + +int wl1271_init_phy_config(struct wl1271 *wl) +{ + int ret; + + ret = wl1271_acx_pd_threshold(wl); + if (ret < 0) + return ret; + + ret = wl1271_acx_slot(wl, DEFAULT_SLOT_TIME); + if (ret < 0) + return ret; + + ret = wl1271_acx_group_address_tbl(wl, true, NULL, 0); + if (ret < 0) + return ret; + + ret = wl1271_acx_service_period_timeout(wl); + if (ret < 0) + return ret; + + ret = wl1271_acx_rts_threshold(wl, wl->conf.rx.rts_threshold); + if (ret < 0) + return ret; + + return 0; +} + +static int wl1271_init_beacon_filter(struct wl1271 *wl) +{ + int ret; + + /* disable beacon filtering at this stage */ + ret = wl1271_acx_beacon_filter_opt(wl, false); + if (ret < 0) + return ret; + + ret = wl1271_acx_beacon_filter_table(wl); + if (ret < 0) + return ret; + + return 0; +} + +int wl1271_init_pta(struct wl1271 *wl) +{ + int ret; + + ret = wl1271_acx_sg_cfg(wl); + if (ret < 0) + return ret; + + ret = wl1271_acx_sg_enable(wl, wl->sg_enabled); + if (ret < 0) + return ret; + + return 0; +} + +int wl1271_init_energy_detection(struct wl1271 *wl) +{ + int ret; + + ret = wl1271_acx_cca_threshold(wl); + if (ret < 0) + return ret; + + return 0; +} + +static int wl1271_init_beacon_broadcast(struct wl1271 *wl) +{ + int ret; + + ret = wl1271_acx_bcn_dtim_options(wl); + if (ret < 0) + return ret; + + return 0; +} + +int wl1271_hw_init(struct wl1271 *wl) +{ + struct conf_tx_ac_category *conf_ac; + struct conf_tx_tid *conf_tid; + int ret, i; + + ret = wl1271_cmd_general_parms(wl); + if (ret < 0) + return ret; + + ret = wl1271_cmd_radio_parms(wl); + if (ret < 0) + return ret; + + ret = wl1271_cmd_ext_radio_parms(wl); + if (ret < 0) + return ret; + + /* Template settings */ + ret = wl1271_init_templates_config(wl); + if (ret < 0) + return ret; + + /* Default memory configuration */ + ret = wl1271_acx_init_mem_config(wl); + if (ret < 0) + return ret; + + /* RX config */ + ret = wl1271_init_rx_config(wl, + RX_CFG_PROMISCUOUS | RX_CFG_TSF, + RX_FILTER_OPTION_DEF); + /* RX_CONFIG_OPTION_ANY_DST_ANY_BSS, + RX_FILTER_OPTION_FILTER_ALL); */ + if (ret < 0) + goto out_free_memmap; + + /* PHY layer config */ + ret = wl1271_init_phy_config(wl); + if (ret < 0) + goto out_free_memmap; + + ret = wl1271_acx_dco_itrim_params(wl); + if (ret < 0) + goto out_free_memmap; + + /* Initialize connection monitoring thresholds */ + ret = wl1271_acx_conn_monit_params(wl, false); + if (ret < 0) + goto out_free_memmap; + + /* Beacon filtering */ + ret = wl1271_init_beacon_filter(wl); + if (ret < 0) + goto out_free_memmap; + + /* Configure TX patch complete interrupt behavior */ + ret = wl1271_acx_tx_config_options(wl); + if (ret < 0) + goto out_free_memmap; + + /* RX complete interrupt pacing */ + ret = wl1271_acx_init_rx_interrupt(wl); + if (ret < 0) + goto out_free_memmap; + + /* Bluetooth WLAN coexistence */ + ret = wl1271_init_pta(wl); + if (ret < 0) + goto out_free_memmap; + + /* Energy detection */ + ret = wl1271_init_energy_detection(wl); + if (ret < 0) + goto out_free_memmap; + + /* Beacons and boradcast settings */ + ret = wl1271_init_beacon_broadcast(wl); + if (ret < 0) + goto out_free_memmap; + + /* Default fragmentation threshold */ + ret = wl1271_acx_frag_threshold(wl); + if (ret < 0) + goto out_free_memmap; + + /* Default TID/AC configuration */ + BUG_ON(wl->conf.tx.tid_conf_count != wl->conf.tx.ac_conf_count); + for (i = 0; i < wl->conf.tx.tid_conf_count; i++) { + conf_ac = &wl->conf.tx.ac_conf[i]; + ret = wl1271_acx_ac_cfg(wl, conf_ac->ac, conf_ac->cw_min, + conf_ac->cw_max, conf_ac->aifsn, + conf_ac->tx_op_limit); + if (ret < 0) + goto out_free_memmap; + + conf_tid = &wl->conf.tx.tid_conf[i]; + ret = wl1271_acx_tid_cfg(wl, conf_tid->queue_id, + conf_tid->channel_type, + conf_tid->tsid, + conf_tid->ps_scheme, + conf_tid->ack_policy, + conf_tid->apsd_conf[0], + conf_tid->apsd_conf[1]); + if (ret < 0) + goto out_free_memmap; + } + + /* Configure TX rate classes */ + ret = wl1271_acx_rate_policies(wl); + if (ret < 0) + goto out_free_memmap; + + /* Enable data path */ + ret = wl1271_cmd_data_path(wl, 1); + if (ret < 0) + goto out_free_memmap; + + /* Configure for ELP power saving */ + ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_ELP); + if (ret < 0) + goto out_free_memmap; + + /* Configure HW encryption */ + ret = wl1271_init_hwenc_config(wl); + if (ret < 0) + goto out_free_memmap; + + /* configure PM */ + ret = wl1271_acx_pm_config(wl); + if (ret < 0) + goto out_free_memmap; + + /* disable all keep-alive templates */ + for (i = 0; i < CMD_TEMPL_KLV_IDX_MAX; i++) { + ret = wl1271_acx_keep_alive_config(wl, i, + ACX_KEEP_ALIVE_TPL_INVALID); + if (ret < 0) + goto out_free_memmap; + } + + /* disable the keep-alive feature */ + ret = wl1271_acx_keep_alive_mode(wl, false); + if (ret < 0) + goto out_free_memmap; + + /* Configure rssi/snr averaging weights */ + ret = wl1271_acx_rssi_snr_avg_weights(wl); + if (ret < 0) + goto out_free_memmap; + + return 0; + + out_free_memmap: + kfree(wl->target_mem_map); + wl->target_mem_map = NULL; + + return ret; +} diff --git a/drivers/net/wireless/wl12xx/init.h b/drivers/net/wireless/wl12xx/init.h new file mode 100644 index 00000000000..7762421f860 --- /dev/null +++ b/drivers/net/wireless/wl12xx/init.h @@ -0,0 +1,36 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 2009 Nokia Corporation + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __INIT_H__ +#define __INIT_H__ + +#include "wl12xx.h" + +int wl1271_hw_init_power_auth(struct wl1271 *wl); +int wl1271_init_templates_config(struct wl1271 *wl); +int wl1271_init_phy_config(struct wl1271 *wl); +int wl1271_init_pta(struct wl1271 *wl); +int wl1271_init_energy_detection(struct wl1271 *wl); +int wl1271_hw_init(struct wl1271 *wl); + +#endif diff --git a/drivers/net/wireless/wl12xx/io.c b/drivers/net/wireless/wl12xx/io.c new file mode 100644 index 00000000000..35c2f1aca6b --- /dev/null +++ b/drivers/net/wireless/wl12xx/io.c @@ -0,0 +1,170 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 2008-2010 Nokia Corporation + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include +#include +#include + +#include "wl12xx.h" +#include "wl12xx_80211.h" +#include "io.h" + +#define OCP_CMD_LOOP 32 + +#define OCP_CMD_WRITE 0x1 +#define OCP_CMD_READ 0x2 + +#define OCP_READY_MASK BIT(18) +#define OCP_STATUS_MASK (BIT(16) | BIT(17)) + +#define OCP_STATUS_NO_RESP 0x00000 +#define OCP_STATUS_OK 0x10000 +#define OCP_STATUS_REQ_FAILED 0x20000 +#define OCP_STATUS_RESP_ERROR 0x30000 + +void wl1271_disable_interrupts(struct wl1271 *wl) +{ + wl->if_ops->disable_irq(wl); +} + +void wl1271_enable_interrupts(struct wl1271 *wl) +{ + wl->if_ops->enable_irq(wl); +} + +/* Set the SPI partitions to access the chip addresses + * + * To simplify driver code, a fixed (virtual) memory map is defined for + * register and memory addresses. Because in the chipset, in different stages + * of operation, those addresses will move around, an address translation + * mechanism is required. + * + * There are four partitions (three memory and one register partition), + * which are mapped to two different areas of the hardware memory. + * + * Virtual address + * space + * + * | | + * ...+----+--> mem.start + * Physical address ... | | + * space ... | | [PART_0] + * ... | | + * 00000000 <--+----+... ...+----+--> mem.start + mem.size + * | | ... | | + * |MEM | ... | | + * | | ... | | + * mem.size <--+----+... | | {unused area) + * | | ... | | + * |REG | ... | | + * mem.size | | ... | | + * + <--+----+... ...+----+--> reg.start + * reg.size | | ... | | + * |MEM2| ... | | [PART_1] + * | | ... | | + * ...+----+--> reg.start + reg.size + * | | + * + */ +int wl1271_set_partition(struct wl1271 *wl, + struct wl1271_partition_set *p) +{ + /* copy partition info */ + memcpy(&wl->part, p, sizeof(*p)); + + wl1271_debug(DEBUG_SPI, "mem_start %08X mem_size %08X", + p->mem.start, p->mem.size); + wl1271_debug(DEBUG_SPI, "reg_start %08X reg_size %08X", + p->reg.start, p->reg.size); + wl1271_debug(DEBUG_SPI, "mem2_start %08X mem2_size %08X", + p->mem2.start, p->mem2.size); + wl1271_debug(DEBUG_SPI, "mem3_start %08X mem3_size %08X", + p->mem3.start, p->mem3.size); + + /* write partition info to the chipset */ + wl1271_raw_write32(wl, HW_PART0_START_ADDR, p->mem.start); + wl1271_raw_write32(wl, HW_PART0_SIZE_ADDR, p->mem.size); + wl1271_raw_write32(wl, HW_PART1_START_ADDR, p->reg.start); + wl1271_raw_write32(wl, HW_PART1_SIZE_ADDR, p->reg.size); + wl1271_raw_write32(wl, HW_PART2_START_ADDR, p->mem2.start); + wl1271_raw_write32(wl, HW_PART2_SIZE_ADDR, p->mem2.size); + wl1271_raw_write32(wl, HW_PART3_START_ADDR, p->mem3.start); + + return 0; +} + +void wl1271_io_reset(struct wl1271 *wl) +{ + wl->if_ops->reset(wl); +} + +void wl1271_io_init(struct wl1271 *wl) +{ + wl->if_ops->init(wl); +} + +void wl1271_top_reg_write(struct wl1271 *wl, int addr, u16 val) +{ + /* write address >> 1 + 0x30000 to OCP_POR_CTR */ + addr = (addr >> 1) + 0x30000; + wl1271_write32(wl, OCP_POR_CTR, addr); + + /* write value to OCP_POR_WDATA */ + wl1271_write32(wl, OCP_DATA_WRITE, val); + + /* write 1 to OCP_CMD */ + wl1271_write32(wl, OCP_CMD, OCP_CMD_WRITE); +} + +u16 wl1271_top_reg_read(struct wl1271 *wl, int addr) +{ + u32 val; + int timeout = OCP_CMD_LOOP; + + /* write address >> 1 + 0x30000 to OCP_POR_CTR */ + addr = (addr >> 1) + 0x30000; + wl1271_write32(wl, OCP_POR_CTR, addr); + + /* write 2 to OCP_CMD */ + wl1271_write32(wl, OCP_CMD, OCP_CMD_READ); + + /* poll for data ready */ + do { + val = wl1271_read32(wl, OCP_DATA_READ); + } while (!(val & OCP_READY_MASK) && --timeout); + + if (!timeout) { + wl1271_warning("Top register access timed out."); + return 0xffff; + } + + /* check data status and return if OK */ + if ((val & OCP_STATUS_MASK) == OCP_STATUS_OK) + return val & 0xffff; + else { + wl1271_warning("Top register access returned error."); + return 0xffff; + } +} + diff --git a/drivers/net/wireless/wl12xx/io.h b/drivers/net/wireless/wl12xx/io.h new file mode 100644 index 00000000000..844b32b170b --- /dev/null +++ b/drivers/net/wireless/wl12xx/io.h @@ -0,0 +1,172 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 1998-2009 Texas Instruments. All rights reserved. + * Copyright (C) 2008-2010 Nokia Corporation + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __IO_H__ +#define __IO_H__ + +#include "reg.h" + +#define HW_ACCESS_MEMORY_MAX_RANGE 0x1FFC0 + +#define HW_PARTITION_REGISTERS_ADDR 0x1FFC0 +#define HW_PART0_SIZE_ADDR (HW_PARTITION_REGISTERS_ADDR) +#define HW_PART0_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 4) +#define HW_PART1_SIZE_ADDR (HW_PARTITION_REGISTERS_ADDR + 8) +#define HW_PART1_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 12) +#define HW_PART2_SIZE_ADDR (HW_PARTITION_REGISTERS_ADDR + 16) +#define HW_PART2_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 20) +#define HW_PART3_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 24) + +#define HW_ACCESS_REGISTER_SIZE 4 + +#define HW_ACCESS_PRAM_MAX_RANGE 0x3c000 + +struct wl1271; + +void wl1271_disable_interrupts(struct wl1271 *wl); +void wl1271_enable_interrupts(struct wl1271 *wl); + +void wl1271_io_reset(struct wl1271 *wl); +void wl1271_io_init(struct wl1271 *wl); + +static inline struct device *wl1271_wl_to_dev(struct wl1271 *wl) +{ + return wl->if_ops->dev(wl); +} + + +/* Raw target IO, address is not translated */ +static inline void wl1271_raw_write(struct wl1271 *wl, int addr, void *buf, + size_t len, bool fixed) +{ + wl->if_ops->write(wl, addr, buf, len, fixed); +} + +static inline void wl1271_raw_read(struct wl1271 *wl, int addr, void *buf, + size_t len, bool fixed) +{ + wl->if_ops->read(wl, addr, buf, len, fixed); +} + +static inline u32 wl1271_raw_read32(struct wl1271 *wl, int addr) +{ + wl1271_raw_read(wl, addr, &wl->buffer_32, + sizeof(wl->buffer_32), false); + + return le32_to_cpu(wl->buffer_32); +} + +static inline void wl1271_raw_write32(struct wl1271 *wl, int addr, u32 val) +{ + wl->buffer_32 = cpu_to_le32(val); + wl1271_raw_write(wl, addr, &wl->buffer_32, + sizeof(wl->buffer_32), false); +} + +/* Translated target IO */ +static inline int wl1271_translate_addr(struct wl1271 *wl, int addr) +{ + /* + * To translate, first check to which window of addresses the + * particular address belongs. Then subtract the starting address + * of that window from the address. Then, add offset of the + * translated region. + * + * The translated regions occur next to each other in physical device + * memory, so just add the sizes of the preceeding address regions to + * get the offset to the new region. + * + * Currently, only the two first regions are addressed, and the + * assumption is that all addresses will fall into either of those + * two. + */ + if ((addr >= wl->part.reg.start) && + (addr < wl->part.reg.start + wl->part.reg.size)) + return addr - wl->part.reg.start + wl->part.mem.size; + else + return addr - wl->part.mem.start; +} + +static inline void wl1271_read(struct wl1271 *wl, int addr, void *buf, + size_t len, bool fixed) +{ + int physical; + + physical = wl1271_translate_addr(wl, addr); + + wl1271_raw_read(wl, physical, buf, len, fixed); +} + +static inline void wl1271_write(struct wl1271 *wl, int addr, void *buf, + size_t len, bool fixed) +{ + int physical; + + physical = wl1271_translate_addr(wl, addr); + + wl1271_raw_write(wl, physical, buf, len, fixed); +} + +static inline u32 wl1271_read32(struct wl1271 *wl, int addr) +{ + return wl1271_raw_read32(wl, wl1271_translate_addr(wl, addr)); +} + +static inline void wl1271_write32(struct wl1271 *wl, int addr, u32 val) +{ + wl1271_raw_write32(wl, wl1271_translate_addr(wl, addr), val); +} + +static inline void wl1271_power_off(struct wl1271 *wl) +{ + wl->if_ops->power(wl, false); + clear_bit(WL1271_FLAG_GPIO_POWER, &wl->flags); +} + +static inline int wl1271_power_on(struct wl1271 *wl) +{ + int ret = wl->if_ops->power(wl, true); + if (ret == 0) + set_bit(WL1271_FLAG_GPIO_POWER, &wl->flags); + + return ret; +} + + +/* Top Register IO */ +void wl1271_top_reg_write(struct wl1271 *wl, int addr, u16 val); +u16 wl1271_top_reg_read(struct wl1271 *wl, int addr); + +int wl1271_set_partition(struct wl1271 *wl, + struct wl1271_partition_set *p); + +/* Functions from wl1271_main.c */ + +int wl1271_register_hw(struct wl1271 *wl); +void wl1271_unregister_hw(struct wl1271 *wl); +int wl1271_init_ieee80211(struct wl1271 *wl); +struct ieee80211_hw *wl1271_alloc_hw(void); +int wl1271_free_hw(struct wl1271 *wl); + +#endif diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c new file mode 100644 index 00000000000..c00523008be --- /dev/null +++ b/drivers/net/wireless/wl12xx/main.c @@ -0,0 +1,2749 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 2008-2010 Nokia Corporation + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "wl12xx.h" +#include "wl12xx_80211.h" +#include "reg.h" +#include "io.h" +#include "event.h" +#include "tx.h" +#include "rx.h" +#include "ps.h" +#include "init.h" +#include "debugfs.h" +#include "cmd.h" +#include "boot.h" +#include "testmode.h" +#include "scan.h" + +#define WL1271_BOOT_RETRIES 3 + +static struct conf_drv_settings default_conf = { + .sg = { + .params = { + [CONF_SG_BT_PER_THRESHOLD] = 7500, + [CONF_SG_HV3_MAX_OVERRIDE] = 0, + [CONF_SG_BT_NFS_SAMPLE_INTERVAL] = 400, + [CONF_SG_BT_LOAD_RATIO] = 50, + [CONF_SG_AUTO_PS_MODE] = 1, + [CONF_SG_AUTO_SCAN_PROBE_REQ] = 170, + [CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3] = 50, + [CONF_SG_ANTENNA_CONFIGURATION] = 0, + [CONF_SG_BEACON_MISS_PERCENT] = 60, + [CONF_SG_RATE_ADAPT_THRESH] = 12, + [CONF_SG_RATE_ADAPT_SNR] = 0, + [CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR] = 10, + [CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR] = 30, + [CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR] = 8, + [CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR] = 20, + [CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR] = 50, + /* Note: with UPSD, this should be 4 */ + [CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR] = 8, + [CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR] = 7, + [CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR] = 25, + [CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR] = 20, + /* Note: with UPDS, this should be 15 */ + [CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR] = 8, + /* Note: with UPDS, this should be 50 */ + [CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR] = 40, + /* Note: with UPDS, this should be 10 */ + [CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR] = 20, + [CONF_SG_RXT] = 1200, + [CONF_SG_TXT] = 1000, + [CONF_SG_ADAPTIVE_RXT_TXT] = 1, + [CONF_SG_PS_POLL_TIMEOUT] = 10, + [CONF_SG_UPSD_TIMEOUT] = 10, + [CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR] = 7, + [CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR] = 15, + [CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR] = 15, + [CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR] = 8, + [CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR] = 20, + [CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR] = 15, + [CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR] = 20, + [CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR] = 50, + [CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR] = 10, + [CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3] = 200, + [CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP] = 800, + [CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME] = 75, + [CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME] = 15, + [CONF_SG_HV3_MAX_SERVED] = 6, + [CONF_SG_DHCP_TIME] = 5000, + [CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP] = 100, + }, + .state = CONF_SG_PROTECTIVE, + }, + .rx = { + .rx_msdu_life_time = 512000, + .packet_detection_threshold = 0, + .ps_poll_timeout = 15, + .upsd_timeout = 15, + .rts_threshold = 2347, + .rx_cca_threshold = 0, + .irq_blk_threshold = 0xFFFF, + .irq_pkt_threshold = 0, + .irq_timeout = 600, + .queue_type = CONF_RX_QUEUE_TYPE_LOW_PRIORITY, + }, + .tx = { + .tx_energy_detection = 0, + .rc_conf = { + .enabled_rates = 0, + .short_retry_limit = 10, + .long_retry_limit = 10, + .aflags = 0 + }, + .ac_conf_count = 4, + .ac_conf = { + [CONF_TX_AC_BE] = { + .ac = CONF_TX_AC_BE, + .cw_min = 15, + .cw_max = 63, + .aifsn = 3, + .tx_op_limit = 0, + }, + [CONF_TX_AC_BK] = { + .ac = CONF_TX_AC_BK, + .cw_min = 15, + .cw_max = 63, + .aifsn = 7, + .tx_op_limit = 0, + }, + [CONF_TX_AC_VI] = { + .ac = CONF_TX_AC_VI, + .cw_min = 15, + .cw_max = 63, + .aifsn = CONF_TX_AIFS_PIFS, + .tx_op_limit = 3008, + }, + [CONF_TX_AC_VO] = { + .ac = CONF_TX_AC_VO, + .cw_min = 15, + .cw_max = 63, + .aifsn = CONF_TX_AIFS_PIFS, + .tx_op_limit = 1504, + }, + }, + .tid_conf_count = 4, + .tid_conf = { + [CONF_TX_AC_BE] = { + .queue_id = CONF_TX_AC_BE, + .channel_type = CONF_CHANNEL_TYPE_EDCF, + .tsid = CONF_TX_AC_BE, + .ps_scheme = CONF_PS_SCHEME_LEGACY, + .ack_policy = CONF_ACK_POLICY_LEGACY, + .apsd_conf = {0, 0}, + }, + [CONF_TX_AC_BK] = { + .queue_id = CONF_TX_AC_BK, + .channel_type = CONF_CHANNEL_TYPE_EDCF, + .tsid = CONF_TX_AC_BK, + .ps_scheme = CONF_PS_SCHEME_LEGACY, + .ack_policy = CONF_ACK_POLICY_LEGACY, + .apsd_conf = {0, 0}, + }, + [CONF_TX_AC_VI] = { + .queue_id = CONF_TX_AC_VI, + .channel_type = CONF_CHANNEL_TYPE_EDCF, + .tsid = CONF_TX_AC_VI, + .ps_scheme = CONF_PS_SCHEME_LEGACY, + .ack_policy = CONF_ACK_POLICY_LEGACY, + .apsd_conf = {0, 0}, + }, + [CONF_TX_AC_VO] = { + .queue_id = CONF_TX_AC_VO, + .channel_type = CONF_CHANNEL_TYPE_EDCF, + .tsid = CONF_TX_AC_VO, + .ps_scheme = CONF_PS_SCHEME_LEGACY, + .ack_policy = CONF_ACK_POLICY_LEGACY, + .apsd_conf = {0, 0}, + }, + }, + .frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD, + .tx_compl_timeout = 700, + .tx_compl_threshold = 4, + .basic_rate = CONF_HW_BIT_RATE_1MBPS, + .basic_rate_5 = CONF_HW_BIT_RATE_6MBPS, + }, + .conn = { + .wake_up_event = CONF_WAKE_UP_EVENT_DTIM, + .listen_interval = 1, + .bcn_filt_mode = CONF_BCN_FILT_MODE_ENABLED, + .bcn_filt_ie_count = 1, + .bcn_filt_ie = { + [0] = { + .ie = WLAN_EID_CHANNEL_SWITCH, + .rule = CONF_BCN_RULE_PASS_ON_APPEARANCE, + } + }, + .synch_fail_thold = 10, + .bss_lose_timeout = 100, + .beacon_rx_timeout = 10000, + .broadcast_timeout = 20000, + .rx_broadcast_in_ps = 1, + .ps_poll_threshold = 10, + .ps_poll_recovery_period = 700, + .bet_enable = CONF_BET_MODE_ENABLE, + .bet_max_consecutive = 10, + .psm_entry_retries = 5, + .psm_entry_nullfunc_retries = 3, + .psm_entry_hangover_period = 1, + .keep_alive_interval = 55000, + .max_listen_interval = 20, + }, + .itrim = { + .enable = false, + .timeout = 50000, + }, + .pm_config = { + .host_clk_settling_time = 5000, + .host_fast_wakeup_support = false + }, + .roam_trigger = { + .trigger_pacing = 1, + .avg_weight_rssi_beacon = 20, + .avg_weight_rssi_data = 10, + .avg_weight_snr_beacon = 20, + .avg_weight_snr_data = 10 + }, + .scan = { + .min_dwell_time_active = 7500, + .max_dwell_time_active = 30000, + .min_dwell_time_passive = 30000, + .max_dwell_time_passive = 60000, + .num_probe_reqs = 2, + }, + .rf = { + .tx_per_channel_power_compensation_2 = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + }, + .tx_per_channel_power_compensation_5 = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + }, + }, +}; + +static void __wl1271_op_remove_interface(struct wl1271 *wl); + + +static void wl1271_device_release(struct device *dev) +{ + +} + +static struct platform_device wl1271_device = { + .name = "wl1271", + .id = -1, + + /* device model insists to have a release function */ + .dev = { + .release = wl1271_device_release, + }, +}; + +static LIST_HEAD(wl_list); + +static int wl1271_dev_notify(struct notifier_block *me, unsigned long what, + void *arg) +{ + struct net_device *dev = arg; + struct wireless_dev *wdev; + struct wiphy *wiphy; + struct ieee80211_hw *hw; + struct wl1271 *wl; + struct wl1271 *wl_temp; + int ret = 0; + + /* Check that this notification is for us. */ + if (what != NETDEV_CHANGE) + return NOTIFY_DONE; + + wdev = dev->ieee80211_ptr; + if (wdev == NULL) + return NOTIFY_DONE; + + wiphy = wdev->wiphy; + if (wiphy == NULL) + return NOTIFY_DONE; + + hw = wiphy_priv(wiphy); + if (hw == NULL) + return NOTIFY_DONE; + + wl_temp = hw->priv; + list_for_each_entry(wl, &wl_list, list) { + if (wl == wl_temp) + break; + } + if (wl != wl_temp) + return NOTIFY_DONE; + + mutex_lock(&wl->mutex); + + if (wl->state == WL1271_STATE_OFF) + goto out; + + if (!test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags)) + goto out; + + ret = wl1271_ps_elp_wakeup(wl, false); + if (ret < 0) + goto out; + + if ((dev->operstate == IF_OPER_UP) && + !test_and_set_bit(WL1271_FLAG_STA_STATE_SENT, &wl->flags)) { + wl1271_cmd_set_sta_state(wl); + wl1271_info("Association completed."); + } + + wl1271_ps_elp_sleep(wl); + +out: + mutex_unlock(&wl->mutex); + + return NOTIFY_OK; +} + +static void wl1271_conf_init(struct wl1271 *wl) +{ + + /* + * This function applies the default configuration to the driver. This + * function is invoked upon driver load (spi probe.) + * + * The configuration is stored in a run-time structure in order to + * facilitate for run-time adjustment of any of the parameters. Making + * changes to the configuration structure will apply the new values on + * the next interface up (wl1271_op_start.) + */ + + /* apply driver default configuration */ + memcpy(&wl->conf, &default_conf, sizeof(default_conf)); +} + + +static int wl1271_plt_init(struct wl1271 *wl) +{ + struct conf_tx_ac_category *conf_ac; + struct conf_tx_tid *conf_tid; + int ret, i; + + ret = wl1271_cmd_general_parms(wl); + if (ret < 0) + return ret; + + ret = wl1271_cmd_radio_parms(wl); + if (ret < 0) + return ret; + + ret = wl1271_cmd_ext_radio_parms(wl); + if (ret < 0) + return ret; + + ret = wl1271_init_templates_config(wl); + if (ret < 0) + return ret; + + ret = wl1271_acx_init_mem_config(wl); + if (ret < 0) + return ret; + + /* PHY layer config */ + ret = wl1271_init_phy_config(wl); + if (ret < 0) + goto out_free_memmap; + + ret = wl1271_acx_dco_itrim_params(wl); + if (ret < 0) + goto out_free_memmap; + + /* Initialize connection monitoring thresholds */ + ret = wl1271_acx_conn_monit_params(wl, false); + if (ret < 0) + goto out_free_memmap; + + /* Bluetooth WLAN coexistence */ + ret = wl1271_init_pta(wl); + if (ret < 0) + goto out_free_memmap; + + /* Energy detection */ + ret = wl1271_init_energy_detection(wl); + if (ret < 0) + goto out_free_memmap; + + /* Default fragmentation threshold */ + ret = wl1271_acx_frag_threshold(wl); + if (ret < 0) + goto out_free_memmap; + + /* Default TID/AC configuration */ + BUG_ON(wl->conf.tx.tid_conf_count != wl->conf.tx.ac_conf_count); + for (i = 0; i < wl->conf.tx.tid_conf_count; i++) { + conf_ac = &wl->conf.tx.ac_conf[i]; + ret = wl1271_acx_ac_cfg(wl, conf_ac->ac, conf_ac->cw_min, + conf_ac->cw_max, conf_ac->aifsn, + conf_ac->tx_op_limit); + if (ret < 0) + goto out_free_memmap; + + conf_tid = &wl->conf.tx.tid_conf[i]; + ret = wl1271_acx_tid_cfg(wl, conf_tid->queue_id, + conf_tid->channel_type, + conf_tid->tsid, + conf_tid->ps_scheme, + conf_tid->ack_policy, + conf_tid->apsd_conf[0], + conf_tid->apsd_conf[1]); + if (ret < 0) + goto out_free_memmap; + } + + /* Enable data path */ + ret = wl1271_cmd_data_path(wl, 1); + if (ret < 0) + goto out_free_memmap; + + /* Configure for CAM power saving (ie. always active) */ + ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_CAM); + if (ret < 0) + goto out_free_memmap; + + /* configure PM */ + ret = wl1271_acx_pm_config(wl); + if (ret < 0) + goto out_free_memmap; + + return 0; + + out_free_memmap: + kfree(wl->target_mem_map); + wl->target_mem_map = NULL; + + return ret; +} + +static void wl1271_fw_status(struct wl1271 *wl, + struct wl1271_fw_status *status) +{ + struct timespec ts; + u32 total = 0; + int i; + + wl1271_raw_read(wl, FW_STATUS_ADDR, status, sizeof(*status), false); + + wl1271_debug(DEBUG_IRQ, "intr: 0x%x (fw_rx_counter = %d, " + "drv_rx_counter = %d, tx_results_counter = %d)", + status->intr, + status->fw_rx_counter, + status->drv_rx_counter, + status->tx_results_counter); + + /* update number of available TX blocks */ + for (i = 0; i < NUM_TX_QUEUES; i++) { + u32 cnt = le32_to_cpu(status->tx_released_blks[i]) - + wl->tx_blocks_freed[i]; + + wl->tx_blocks_freed[i] = + le32_to_cpu(status->tx_released_blks[i]); + wl->tx_blocks_available += cnt; + total += cnt; + } + + /* if more blocks are available now, tx work can be scheduled */ + if (total) + clear_bit(WL1271_FLAG_FW_TX_BUSY, &wl->flags); + + /* update the host-chipset time offset */ + getnstimeofday(&ts); + wl->time_offset = (timespec_to_ns(&ts) >> 10) - + (s64)le32_to_cpu(status->fw_localtime); +} + +#define WL1271_IRQ_MAX_LOOPS 10 + +static void wl1271_irq_work(struct work_struct *work) +{ + int ret; + u32 intr; + int loopcount = WL1271_IRQ_MAX_LOOPS; + unsigned long flags; + struct wl1271 *wl = + container_of(work, struct wl1271, irq_work); + + mutex_lock(&wl->mutex); + + wl1271_debug(DEBUG_IRQ, "IRQ work"); + + if (unlikely(wl->state == WL1271_STATE_OFF)) + goto out; + + ret = wl1271_ps_elp_wakeup(wl, true); + if (ret < 0) + goto out; + + spin_lock_irqsave(&wl->wl_lock, flags); + while (test_bit(WL1271_FLAG_IRQ_PENDING, &wl->flags) && loopcount) { + clear_bit(WL1271_FLAG_IRQ_PENDING, &wl->flags); + spin_unlock_irqrestore(&wl->wl_lock, flags); + loopcount--; + + wl1271_fw_status(wl, wl->fw_status); + intr = le32_to_cpu(wl->fw_status->intr); + if (!intr) { + wl1271_debug(DEBUG_IRQ, "Zero interrupt received."); + spin_lock_irqsave(&wl->wl_lock, flags); + continue; + } + + intr &= WL1271_INTR_MASK; + + if (unlikely(intr & WL1271_ACX_INTR_WATCHDOG)) { + wl1271_error("watchdog interrupt received! " + "starting recovery."); + ieee80211_queue_work(wl->hw, &wl->recovery_work); + + /* restarting the chip. ignore any other interrupt. */ + goto out; + } + + if (intr & WL1271_ACX_INTR_DATA) { + wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_DATA"); + + /* check for tx results */ + if (wl->fw_status->tx_results_counter != + (wl->tx_results_count & 0xff)) + wl1271_tx_complete(wl); + + /* Check if any tx blocks were freed */ + if (!test_bit(WL1271_FLAG_FW_TX_BUSY, &wl->flags) && + !skb_queue_empty(&wl->tx_queue)) { + /* + * In order to avoid starvation of the TX path, + * call the work function directly. + */ + wl1271_tx_work_locked(wl); + } + + wl1271_rx(wl, wl->fw_status); + } + + if (intr & WL1271_ACX_INTR_EVENT_A) { + wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_EVENT_A"); + wl1271_event_handle(wl, 0); + } + + if (intr & WL1271_ACX_INTR_EVENT_B) { + wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_EVENT_B"); + wl1271_event_handle(wl, 1); + } + + if (intr & WL1271_ACX_INTR_INIT_COMPLETE) + wl1271_debug(DEBUG_IRQ, + "WL1271_ACX_INTR_INIT_COMPLETE"); + + if (intr & WL1271_ACX_INTR_HW_AVAILABLE) + wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_HW_AVAILABLE"); + + spin_lock_irqsave(&wl->wl_lock, flags); + } + + if (test_bit(WL1271_FLAG_IRQ_PENDING, &wl->flags)) + ieee80211_queue_work(wl->hw, &wl->irq_work); + else + clear_bit(WL1271_FLAG_IRQ_RUNNING, &wl->flags); + spin_unlock_irqrestore(&wl->wl_lock, flags); + + wl1271_ps_elp_sleep(wl); + +out: + mutex_unlock(&wl->mutex); +} + +static int wl1271_fetch_firmware(struct wl1271 *wl) +{ + const struct firmware *fw; + int ret; + + ret = request_firmware(&fw, WL1271_FW_NAME, wl1271_wl_to_dev(wl)); + + if (ret < 0) { + wl1271_error("could not get firmware: %d", ret); + return ret; + } + + if (fw->size % 4) { + wl1271_error("firmware size is not multiple of 32 bits: %zu", + fw->size); + ret = -EILSEQ; + goto out; + } + + wl->fw_len = fw->size; + wl->fw = vmalloc(wl->fw_len); + + if (!wl->fw) { + wl1271_error("could not allocate memory for the firmware"); + ret = -ENOMEM; + goto out; + } + + memcpy(wl->fw, fw->data, wl->fw_len); + + ret = 0; + +out: + release_firmware(fw); + + return ret; +} + +static int wl1271_fetch_nvs(struct wl1271 *wl) +{ + const struct firmware *fw; + int ret; + + ret = request_firmware(&fw, WL1271_NVS_NAME, wl1271_wl_to_dev(wl)); + + if (ret < 0) { + wl1271_error("could not get nvs file: %d", ret); + return ret; + } + + wl->nvs = kmemdup(fw->data, sizeof(struct wl1271_nvs_file), GFP_KERNEL); + + if (!wl->nvs) { + wl1271_error("could not allocate memory for the nvs file"); + ret = -ENOMEM; + goto out; + } + + wl->nvs_len = fw->size; + +out: + release_firmware(fw); + + return ret; +} + +static void wl1271_recovery_work(struct work_struct *work) +{ + struct wl1271 *wl = + container_of(work, struct wl1271, recovery_work); + + mutex_lock(&wl->mutex); + + if (wl->state != WL1271_STATE_ON) + goto out; + + wl1271_info("Hardware recovery in progress."); + + if (test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags)) + ieee80211_connection_loss(wl->vif); + + /* reboot the chipset */ + __wl1271_op_remove_interface(wl); + ieee80211_restart_hw(wl->hw); + +out: + mutex_unlock(&wl->mutex); +} + +static void wl1271_fw_wakeup(struct wl1271 *wl) +{ + u32 elp_reg; + + elp_reg = ELPCTRL_WAKE_UP; + wl1271_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, elp_reg); +} + +static int wl1271_setup(struct wl1271 *wl) +{ + wl->fw_status = kmalloc(sizeof(*wl->fw_status), GFP_KERNEL); + if (!wl->fw_status) + return -ENOMEM; + + wl->tx_res_if = kmalloc(sizeof(*wl->tx_res_if), GFP_KERNEL); + if (!wl->tx_res_if) { + kfree(wl->fw_status); + return -ENOMEM; + } + + return 0; +} + +static int wl1271_chip_wakeup(struct wl1271 *wl) +{ + struct wl1271_partition_set partition; + int ret = 0; + + msleep(WL1271_PRE_POWER_ON_SLEEP); + ret = wl1271_power_on(wl); + if (ret < 0) + goto out; + msleep(WL1271_POWER_ON_SLEEP); + wl1271_io_reset(wl); + wl1271_io_init(wl); + + /* We don't need a real memory partition here, because we only want + * to use the registers at this point. */ + memset(&partition, 0, sizeof(partition)); + partition.reg.start = REGISTERS_BASE; + partition.reg.size = REGISTERS_DOWN_SIZE; + wl1271_set_partition(wl, &partition); + + /* ELP module wake up */ + wl1271_fw_wakeup(wl); + + /* whal_FwCtrl_BootSm() */ + + /* 0. read chip id from CHIP_ID */ + wl->chip.id = wl1271_read32(wl, CHIP_ID_B); + + /* 1. check if chip id is valid */ + + switch (wl->chip.id) { + case CHIP_ID_1271_PG10: + wl1271_warning("chip id 0x%x (1271 PG10) support is obsolete", + wl->chip.id); + + ret = wl1271_setup(wl); + if (ret < 0) + goto out; + break; + case CHIP_ID_1271_PG20: + wl1271_debug(DEBUG_BOOT, "chip id 0x%x (1271 PG20)", + wl->chip.id); + + ret = wl1271_setup(wl); + if (ret < 0) + goto out; + break; + default: + wl1271_warning("unsupported chip id: 0x%x", wl->chip.id); + ret = -ENODEV; + goto out; + } + + if (wl->fw == NULL) { + ret = wl1271_fetch_firmware(wl); + if (ret < 0) + goto out; + } + + /* No NVS from netlink, try to get it from the filesystem */ + if (wl->nvs == NULL) { + ret = wl1271_fetch_nvs(wl); + if (ret < 0) + goto out; + } + +out: + return ret; +} + +int wl1271_plt_start(struct wl1271 *wl) +{ + int retries = WL1271_BOOT_RETRIES; + int ret; + + mutex_lock(&wl->mutex); + + wl1271_notice("power up"); + + if (wl->state != WL1271_STATE_OFF) { + wl1271_error("cannot go into PLT state because not " + "in off state: %d", wl->state); + ret = -EBUSY; + goto out; + } + + while (retries) { + retries--; + ret = wl1271_chip_wakeup(wl); + if (ret < 0) + goto power_off; + + ret = wl1271_boot(wl); + if (ret < 0) + goto power_off; + + ret = wl1271_plt_init(wl); + if (ret < 0) + goto irq_disable; + + wl->state = WL1271_STATE_PLT; + wl1271_notice("firmware booted in PLT mode (%s)", + wl->chip.fw_ver); + goto out; + +irq_disable: + wl1271_disable_interrupts(wl); + mutex_unlock(&wl->mutex); + /* Unlocking the mutex in the middle of handling is + inherently unsafe. In this case we deem it safe to do, + because we need to let any possibly pending IRQ out of + the system (and while we are WL1271_STATE_OFF the IRQ + work function will not do anything.) Also, any other + possible concurrent operations will fail due to the + current state, hence the wl1271 struct should be safe. */ + cancel_work_sync(&wl->irq_work); + mutex_lock(&wl->mutex); +power_off: + wl1271_power_off(wl); + } + + wl1271_error("firmware boot in PLT mode failed despite %d retries", + WL1271_BOOT_RETRIES); +out: + mutex_unlock(&wl->mutex); + + return ret; +} + +int wl1271_plt_stop(struct wl1271 *wl) +{ + int ret = 0; + + mutex_lock(&wl->mutex); + + wl1271_notice("power down"); + + if (wl->state != WL1271_STATE_PLT) { + wl1271_error("cannot power down because not in PLT " + "state: %d", wl->state); + ret = -EBUSY; + goto out; + } + + wl1271_disable_interrupts(wl); + wl1271_power_off(wl); + + wl->state = WL1271_STATE_OFF; + wl->rx_counter = 0; + +out: + mutex_unlock(&wl->mutex); + + cancel_work_sync(&wl->irq_work); + cancel_work_sync(&wl->recovery_work); + + return ret; +} + +static int wl1271_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb) +{ + struct wl1271 *wl = hw->priv; + struct ieee80211_conf *conf = &hw->conf; + struct ieee80211_tx_info *txinfo = IEEE80211_SKB_CB(skb); + struct ieee80211_sta *sta = txinfo->control.sta; + unsigned long flags; + + /* + * peek into the rates configured in the STA entry. + * The rates set after connection stage, The first block only BG sets: + * the compare is for bit 0-16 of sta_rate_set. The second block add + * HT rates in case of HT supported. + */ + spin_lock_irqsave(&wl->wl_lock, flags); + if (sta && + (sta->supp_rates[conf->channel->band] != + (wl->sta_rate_set & HW_BG_RATES_MASK))) { + wl->sta_rate_set = sta->supp_rates[conf->channel->band]; + set_bit(WL1271_FLAG_STA_RATES_CHANGED, &wl->flags); + } + +#ifdef CONFIG_WL12XX_HT + if (sta && + sta->ht_cap.ht_supported && + ((wl->sta_rate_set >> HW_HT_RATES_OFFSET) != + sta->ht_cap.mcs.rx_mask[0])) { + /* Clean MCS bits before setting them */ + wl->sta_rate_set &= HW_BG_RATES_MASK; + wl->sta_rate_set |= + (sta->ht_cap.mcs.rx_mask[0] << HW_HT_RATES_OFFSET); + set_bit(WL1271_FLAG_STA_RATES_CHANGED, &wl->flags); + } +#endif + spin_unlock_irqrestore(&wl->wl_lock, flags); + + /* queue the packet */ + skb_queue_tail(&wl->tx_queue, skb); + + /* + * The chip specific setup must run before the first TX packet - + * before that, the tx_work will not be initialized! + */ + + if (!test_bit(WL1271_FLAG_FW_TX_BUSY, &wl->flags)) + ieee80211_queue_work(wl->hw, &wl->tx_work); + + /* + * The workqueue is slow to process the tx_queue and we need stop + * the queue here, otherwise the queue will get too long. + */ + if (skb_queue_len(&wl->tx_queue) >= WL1271_TX_QUEUE_HIGH_WATERMARK) { + wl1271_debug(DEBUG_TX, "op_tx: stopping queues"); + + spin_lock_irqsave(&wl->wl_lock, flags); + ieee80211_stop_queues(wl->hw); + set_bit(WL1271_FLAG_TX_QUEUE_STOPPED, &wl->flags); + spin_unlock_irqrestore(&wl->wl_lock, flags); + } + + return NETDEV_TX_OK; +} + +static struct notifier_block wl1271_dev_notifier = { + .notifier_call = wl1271_dev_notify, +}; + +static int wl1271_op_start(struct ieee80211_hw *hw) +{ + wl1271_debug(DEBUG_MAC80211, "mac80211 start"); + + /* + * We have to delay the booting of the hardware because + * we need to know the local MAC address before downloading and + * initializing the firmware. The MAC address cannot be changed + * after boot, and without the proper MAC address, the firmware + * will not function properly. + * + * The MAC address is first known when the corresponding interface + * is added. That is where we will initialize the hardware. + */ + + return 0; +} + +static void wl1271_op_stop(struct ieee80211_hw *hw) +{ + wl1271_debug(DEBUG_MAC80211, "mac80211 stop"); +} + +static int wl1271_op_add_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct wl1271 *wl = hw->priv; + struct wiphy *wiphy = hw->wiphy; + int retries = WL1271_BOOT_RETRIES; + int ret = 0; + bool booted = false; + + wl1271_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %pM", + vif->type, vif->addr); + + mutex_lock(&wl->mutex); + if (wl->vif) { + wl1271_debug(DEBUG_MAC80211, + "multiple vifs are not supported yet"); + ret = -EBUSY; + goto out; + } + + switch (vif->type) { + case NL80211_IFTYPE_STATION: + wl->bss_type = BSS_TYPE_STA_BSS; + wl->set_bss_type = BSS_TYPE_STA_BSS; + break; + case NL80211_IFTYPE_ADHOC: + wl->bss_type = BSS_TYPE_IBSS; + wl->set_bss_type = BSS_TYPE_STA_BSS; + break; + default: + ret = -EOPNOTSUPP; + goto out; + } + + memcpy(wl->mac_addr, vif->addr, ETH_ALEN); + + if (wl->state != WL1271_STATE_OFF) { + wl1271_error("cannot start because not in off state: %d", + wl->state); + ret = -EBUSY; + goto out; + } + + while (retries) { + retries--; + ret = wl1271_chip_wakeup(wl); + if (ret < 0) + goto power_off; + + ret = wl1271_boot(wl); + if (ret < 0) + goto power_off; + + ret = wl1271_hw_init(wl); + if (ret < 0) + goto irq_disable; + + booted = true; + break; + +irq_disable: + wl1271_disable_interrupts(wl); + mutex_unlock(&wl->mutex); + /* Unlocking the mutex in the middle of handling is + inherently unsafe. In this case we deem it safe to do, + because we need to let any possibly pending IRQ out of + the system (and while we are WL1271_STATE_OFF the IRQ + work function will not do anything.) Also, any other + possible concurrent operations will fail due to the + current state, hence the wl1271 struct should be safe. */ + cancel_work_sync(&wl->irq_work); + mutex_lock(&wl->mutex); +power_off: + wl1271_power_off(wl); + } + + if (!booted) { + wl1271_error("firmware boot failed despite %d retries", + WL1271_BOOT_RETRIES); + goto out; + } + + wl->vif = vif; + wl->state = WL1271_STATE_ON; + wl1271_info("firmware booted (%s)", wl->chip.fw_ver); + + /* update hw/fw version info in wiphy struct */ + wiphy->hw_version = wl->chip.id; + strncpy(wiphy->fw_version, wl->chip.fw_ver, + sizeof(wiphy->fw_version)); + +out: + mutex_unlock(&wl->mutex); + + if (!ret) + list_add(&wl->list, &wl_list); + + return ret; +} + +static void __wl1271_op_remove_interface(struct wl1271 *wl) +{ + int i; + + wl1271_debug(DEBUG_MAC80211, "mac80211 remove interface"); + + wl1271_info("down"); + + list_del(&wl->list); + + WARN_ON(wl->state != WL1271_STATE_ON); + + /* enable dyn ps just in case (if left on due to fw crash etc) */ + if (wl->bss_type == BSS_TYPE_STA_BSS) + ieee80211_enable_dyn_ps(wl->vif); + + if (wl->scan.state != WL1271_SCAN_STATE_IDLE) { + wl->scan.state = WL1271_SCAN_STATE_IDLE; + kfree(wl->scan.scanned_ch); + wl->scan.scanned_ch = NULL; + wl->scan.req = NULL; + ieee80211_scan_completed(wl->hw, true); + } + + wl->state = WL1271_STATE_OFF; + + wl1271_disable_interrupts(wl); + + mutex_unlock(&wl->mutex); + + cancel_delayed_work_sync(&wl->scan_complete_work); + cancel_work_sync(&wl->irq_work); + cancel_work_sync(&wl->tx_work); + cancel_delayed_work_sync(&wl->pspoll_work); + cancel_delayed_work_sync(&wl->elp_work); + + mutex_lock(&wl->mutex); + + /* let's notify MAC80211 about the remaining pending TX frames */ + wl1271_tx_reset(wl); + wl1271_power_off(wl); + + memset(wl->bssid, 0, ETH_ALEN); + memset(wl->ssid, 0, IW_ESSID_MAX_SIZE + 1); + wl->ssid_len = 0; + wl->bss_type = MAX_BSS_TYPE; + wl->set_bss_type = MAX_BSS_TYPE; + wl->band = IEEE80211_BAND_2GHZ; + + wl->rx_counter = 0; + wl->psm_entry_retry = 0; + wl->power_level = WL1271_DEFAULT_POWER_LEVEL; + wl->tx_blocks_available = 0; + wl->tx_results_count = 0; + wl->tx_packets_count = 0; + wl->tx_security_last_seq = 0; + wl->tx_security_seq = 0; + wl->time_offset = 0; + wl->session_counter = 0; + wl->rate_set = CONF_TX_RATE_MASK_BASIC; + wl->sta_rate_set = 0; + wl->flags = 0; + wl->vif = NULL; + wl->filters = 0; + + for (i = 0; i < NUM_TX_QUEUES; i++) + wl->tx_blocks_freed[i] = 0; + + wl1271_debugfs_reset(wl); + + kfree(wl->fw_status); + wl->fw_status = NULL; + kfree(wl->tx_res_if); + wl->tx_res_if = NULL; + kfree(wl->target_mem_map); + wl->target_mem_map = NULL; +} + +static void wl1271_op_remove_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct wl1271 *wl = hw->priv; + + mutex_lock(&wl->mutex); + WARN_ON(wl->vif != vif); + __wl1271_op_remove_interface(wl); + mutex_unlock(&wl->mutex); + + cancel_work_sync(&wl->recovery_work); +} + +static void wl1271_configure_filters(struct wl1271 *wl, unsigned int filters) +{ + wl->rx_config = WL1271_DEFAULT_RX_CONFIG; + wl->rx_filter = WL1271_DEFAULT_RX_FILTER; + + /* combine requested filters with current filter config */ + filters = wl->filters | filters; + + wl1271_debug(DEBUG_FILTERS, "RX filters set: "); + + if (filters & FIF_PROMISC_IN_BSS) { + wl1271_debug(DEBUG_FILTERS, " - FIF_PROMISC_IN_BSS"); + wl->rx_config &= ~CFG_UNI_FILTER_EN; + wl->rx_config |= CFG_BSSID_FILTER_EN; + } + if (filters & FIF_BCN_PRBRESP_PROMISC) { + wl1271_debug(DEBUG_FILTERS, " - FIF_BCN_PRBRESP_PROMISC"); + wl->rx_config &= ~CFG_BSSID_FILTER_EN; + wl->rx_config &= ~CFG_SSID_FILTER_EN; + } + if (filters & FIF_OTHER_BSS) { + wl1271_debug(DEBUG_FILTERS, " - FIF_OTHER_BSS"); + wl->rx_config &= ~CFG_BSSID_FILTER_EN; + } + if (filters & FIF_CONTROL) { + wl1271_debug(DEBUG_FILTERS, " - FIF_CONTROL"); + wl->rx_filter |= CFG_RX_CTL_EN; + } + if (filters & FIF_FCSFAIL) { + wl1271_debug(DEBUG_FILTERS, " - FIF_FCSFAIL"); + wl->rx_filter |= CFG_RX_FCS_ERROR; + } +} + +static int wl1271_dummy_join(struct wl1271 *wl) +{ + int ret = 0; + /* we need to use a dummy BSSID for now */ + static const u8 dummy_bssid[ETH_ALEN] = { 0x0b, 0xad, 0xde, + 0xad, 0xbe, 0xef }; + + memcpy(wl->bssid, dummy_bssid, ETH_ALEN); + + /* pass through frames from all BSS */ + wl1271_configure_filters(wl, FIF_OTHER_BSS); + + ret = wl1271_cmd_join(wl, wl->set_bss_type); + if (ret < 0) + goto out; + + set_bit(WL1271_FLAG_JOINED, &wl->flags); + +out: + return ret; +} + +static int wl1271_join(struct wl1271 *wl, bool set_assoc) +{ + int ret; + + /* + * One of the side effects of the JOIN command is that is clears + * WPA/WPA2 keys from the chipset. Performing a JOIN while associated + * to a WPA/WPA2 access point will therefore kill the data-path. + * Currently there is no supported scenario for JOIN during + * association - if it becomes a supported scenario, the WPA/WPA2 keys + * must be handled somehow. + * + */ + if (test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags)) + wl1271_info("JOIN while associated."); + + if (set_assoc) + set_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags); + + ret = wl1271_cmd_join(wl, wl->set_bss_type); + if (ret < 0) + goto out; + + set_bit(WL1271_FLAG_JOINED, &wl->flags); + + if (!test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags)) + goto out; + + /* + * The join command disable the keep-alive mode, shut down its process, + * and also clear the template config, so we need to reset it all after + * the join. The acx_aid starts the keep-alive process, and the order + * of the commands below is relevant. + */ + ret = wl1271_acx_keep_alive_mode(wl, true); + if (ret < 0) + goto out; + + ret = wl1271_acx_aid(wl, wl->aid); + if (ret < 0) + goto out; + + ret = wl1271_cmd_build_klv_null_data(wl); + if (ret < 0) + goto out; + + ret = wl1271_acx_keep_alive_config(wl, CMD_TEMPL_KLV_IDX_NULL_DATA, + ACX_KEEP_ALIVE_TPL_VALID); + if (ret < 0) + goto out; + +out: + return ret; +} + +static int wl1271_unjoin(struct wl1271 *wl) +{ + int ret; + + /* to stop listening to a channel, we disconnect */ + ret = wl1271_cmd_disconnect(wl); + if (ret < 0) + goto out; + + clear_bit(WL1271_FLAG_JOINED, &wl->flags); + memset(wl->bssid, 0, ETH_ALEN); + + /* stop filterting packets based on bssid */ + wl1271_configure_filters(wl, FIF_OTHER_BSS); + +out: + return ret; +} + +static void wl1271_set_band_rate(struct wl1271 *wl) +{ + if (wl->band == IEEE80211_BAND_2GHZ) + wl->basic_rate_set = wl->conf.tx.basic_rate; + else + wl->basic_rate_set = wl->conf.tx.basic_rate_5; +} + +static u32 wl1271_min_rate_get(struct wl1271 *wl) +{ + int i; + u32 rate = 0; + + if (!wl->basic_rate_set) { + WARN_ON(1); + wl->basic_rate_set = wl->conf.tx.basic_rate; + } + + for (i = 0; !rate; i++) { + if ((wl->basic_rate_set >> i) & 0x1) + rate = 1 << i; + } + + return rate; +} + +static int wl1271_handle_idle(struct wl1271 *wl, bool idle) +{ + int ret; + + if (idle) { + if (test_bit(WL1271_FLAG_JOINED, &wl->flags)) { + ret = wl1271_unjoin(wl); + if (ret < 0) + goto out; + } + wl->rate_set = wl1271_min_rate_get(wl); + wl->sta_rate_set = 0; + ret = wl1271_acx_rate_policies(wl); + if (ret < 0) + goto out; + ret = wl1271_acx_keep_alive_config( + wl, CMD_TEMPL_KLV_IDX_NULL_DATA, + ACX_KEEP_ALIVE_TPL_INVALID); + if (ret < 0) + goto out; + set_bit(WL1271_FLAG_IDLE, &wl->flags); + } else { + /* increment the session counter */ + wl->session_counter++; + if (wl->session_counter >= SESSION_COUNTER_MAX) + wl->session_counter = 0; + ret = wl1271_dummy_join(wl); + if (ret < 0) + goto out; + clear_bit(WL1271_FLAG_IDLE, &wl->flags); + } + +out: + return ret; +} + +static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed) +{ + struct wl1271 *wl = hw->priv; + struct ieee80211_conf *conf = &hw->conf; + int channel, ret = 0; + + channel = ieee80211_frequency_to_channel(conf->channel->center_freq); + + wl1271_debug(DEBUG_MAC80211, "mac80211 config ch %d psm %s power %d %s", + channel, + conf->flags & IEEE80211_CONF_PS ? "on" : "off", + conf->power_level, + conf->flags & IEEE80211_CONF_IDLE ? "idle" : "in use"); + + /* + * mac80211 will go to idle nearly immediately after transmitting some + * frames, such as the deauth. To make sure those frames reach the air, + * wait here until the TX queue is fully flushed. + */ + if ((changed & IEEE80211_CONF_CHANGE_IDLE) && + (conf->flags & IEEE80211_CONF_IDLE)) + wl1271_tx_flush(wl); + + mutex_lock(&wl->mutex); + + if (unlikely(wl->state == WL1271_STATE_OFF)) { + ret = -EAGAIN; + goto out; + } + + ret = wl1271_ps_elp_wakeup(wl, false); + if (ret < 0) + goto out; + + /* if the channel changes while joined, join again */ + if (changed & IEEE80211_CONF_CHANGE_CHANNEL && + ((wl->band != conf->channel->band) || + (wl->channel != channel))) { + wl->band = conf->channel->band; + wl->channel = channel; + + /* + * FIXME: the mac80211 should really provide a fixed rate + * to use here. for now, just use the smallest possible rate + * for the band as a fixed rate for association frames and + * other control messages. + */ + if (!test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags)) + wl1271_set_band_rate(wl); + + wl->basic_rate = wl1271_min_rate_get(wl); + ret = wl1271_acx_rate_policies(wl); + if (ret < 0) + wl1271_warning("rate policy for update channel " + "failed %d", ret); + + if (test_bit(WL1271_FLAG_JOINED, &wl->flags)) { + ret = wl1271_join(wl, false); + if (ret < 0) + wl1271_warning("cmd join to update channel " + "failed %d", ret); + } + } + + if (changed & IEEE80211_CONF_CHANGE_IDLE) { + ret = wl1271_handle_idle(wl, conf->flags & IEEE80211_CONF_IDLE); + if (ret < 0) + wl1271_warning("idle mode change failed %d", ret); + } + + /* + * if mac80211 changes the PSM mode, make sure the mode is not + * incorrectly changed after the pspoll failure active window. + */ + if (changed & IEEE80211_CONF_CHANGE_PS) + clear_bit(WL1271_FLAG_PSPOLL_FAILURE, &wl->flags); + + if (conf->flags & IEEE80211_CONF_PS && + !test_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags)) { + set_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags); + + /* + * We enter PSM only if we're already associated. + * If we're not, we'll enter it when joining an SSID, + * through the bss_info_changed() hook. + */ + if (test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags)) { + wl1271_debug(DEBUG_PSM, "psm enabled"); + ret = wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE, + wl->basic_rate, true); + } + } else if (!(conf->flags & IEEE80211_CONF_PS) && + test_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags)) { + wl1271_debug(DEBUG_PSM, "psm disabled"); + + clear_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags); + + if (test_bit(WL1271_FLAG_PSM, &wl->flags)) + ret = wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE, + wl->basic_rate, true); + } + + if (conf->power_level != wl->power_level) { + ret = wl1271_acx_tx_power(wl, conf->power_level); + if (ret < 0) + goto out_sleep; + + wl->power_level = conf->power_level; + } + +out_sleep: + wl1271_ps_elp_sleep(wl); + +out: + mutex_unlock(&wl->mutex); + + return ret; +} + +struct wl1271_filter_params { + bool enabled; + int mc_list_length; + u8 mc_list[ACX_MC_ADDRESS_GROUP_MAX][ETH_ALEN]; +}; + +static u64 wl1271_op_prepare_multicast(struct ieee80211_hw *hw, + struct netdev_hw_addr_list *mc_list) +{ + struct wl1271_filter_params *fp; + struct netdev_hw_addr *ha; + struct wl1271 *wl = hw->priv; + + if (unlikely(wl->state == WL1271_STATE_OFF)) + return 0; + + fp = kzalloc(sizeof(*fp), GFP_ATOMIC); + if (!fp) { + wl1271_error("Out of memory setting filters."); + return 0; + } + + /* update multicast filtering parameters */ + fp->mc_list_length = 0; + if (netdev_hw_addr_list_count(mc_list) > ACX_MC_ADDRESS_GROUP_MAX) { + fp->enabled = false; + } else { + fp->enabled = true; + netdev_hw_addr_list_for_each(ha, mc_list) { + memcpy(fp->mc_list[fp->mc_list_length], + ha->addr, ETH_ALEN); + fp->mc_list_length++; + } + } + + return (u64)(unsigned long)fp; +} + +#define WL1271_SUPPORTED_FILTERS (FIF_PROMISC_IN_BSS | \ + FIF_ALLMULTI | \ + FIF_FCSFAIL | \ + FIF_BCN_PRBRESP_PROMISC | \ + FIF_CONTROL | \ + FIF_OTHER_BSS) + +static void wl1271_op_configure_filter(struct ieee80211_hw *hw, + unsigned int changed, + unsigned int *total, u64 multicast) +{ + struct wl1271_filter_params *fp = (void *)(unsigned long)multicast; + struct wl1271 *wl = hw->priv; + int ret; + + wl1271_debug(DEBUG_MAC80211, "mac80211 configure filter"); + + mutex_lock(&wl->mutex); + + *total &= WL1271_SUPPORTED_FILTERS; + changed &= WL1271_SUPPORTED_FILTERS; + + if (unlikely(wl->state == WL1271_STATE_OFF)) + goto out; + + ret = wl1271_ps_elp_wakeup(wl, false); + if (ret < 0) + goto out; + + + if (*total & FIF_ALLMULTI) + ret = wl1271_acx_group_address_tbl(wl, false, NULL, 0); + else if (fp) + ret = wl1271_acx_group_address_tbl(wl, fp->enabled, + fp->mc_list, + fp->mc_list_length); + if (ret < 0) + goto out_sleep; + + /* determine, whether supported filter values have changed */ + if (changed == 0) + goto out_sleep; + + /* configure filters */ + wl->filters = *total; + wl1271_configure_filters(wl, 0); + + /* apply configured filters */ + ret = wl1271_acx_rx_config(wl, wl->rx_config, wl->rx_filter); + if (ret < 0) + goto out_sleep; + +out_sleep: + wl1271_ps_elp_sleep(wl); + +out: + mutex_unlock(&wl->mutex); + kfree(fp); +} + +static int wl1271_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct ieee80211_key_conf *key_conf) +{ + struct wl1271 *wl = hw->priv; + const u8 *addr; + int ret; + u32 tx_seq_32 = 0; + u16 tx_seq_16 = 0; + u8 key_type; + + static const u8 bcast_addr[ETH_ALEN] = + { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; + + wl1271_debug(DEBUG_MAC80211, "mac80211 set key"); + + addr = sta ? sta->addr : bcast_addr; + + wl1271_debug(DEBUG_CRYPT, "CMD: 0x%x", cmd); + wl1271_dump(DEBUG_CRYPT, "ADDR: ", addr, ETH_ALEN); + wl1271_debug(DEBUG_CRYPT, "Key: algo:0x%x, id:%d, len:%d flags 0x%x", + key_conf->cipher, key_conf->keyidx, + key_conf->keylen, key_conf->flags); + wl1271_dump(DEBUG_CRYPT, "KEY: ", key_conf->key, key_conf->keylen); + + if (is_zero_ether_addr(addr)) { + /* We dont support TX only encryption */ + ret = -EOPNOTSUPP; + goto out; + } + + mutex_lock(&wl->mutex); + + if (unlikely(wl->state == WL1271_STATE_OFF)) { + ret = -EAGAIN; + goto out_unlock; + } + + ret = wl1271_ps_elp_wakeup(wl, false); + if (ret < 0) + goto out_unlock; + + switch (key_conf->cipher) { + case WLAN_CIPHER_SUITE_WEP40: + case WLAN_CIPHER_SUITE_WEP104: + key_type = KEY_WEP; + + key_conf->hw_key_idx = key_conf->keyidx; + break; + case WLAN_CIPHER_SUITE_TKIP: + key_type = KEY_TKIP; + + key_conf->hw_key_idx = key_conf->keyidx; + tx_seq_32 = WL1271_TX_SECURITY_HI32(wl->tx_security_seq); + tx_seq_16 = WL1271_TX_SECURITY_LO16(wl->tx_security_seq); + break; + case WLAN_CIPHER_SUITE_CCMP: + key_type = KEY_AES; + + key_conf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + tx_seq_32 = WL1271_TX_SECURITY_HI32(wl->tx_security_seq); + tx_seq_16 = WL1271_TX_SECURITY_LO16(wl->tx_security_seq); + break; + case WL1271_CIPHER_SUITE_GEM: + key_type = KEY_GEM; + tx_seq_32 = WL1271_TX_SECURITY_HI32(wl->tx_security_seq); + tx_seq_16 = WL1271_TX_SECURITY_LO16(wl->tx_security_seq); + break; + default: + wl1271_error("Unknown key algo 0x%x", key_conf->cipher); + + ret = -EOPNOTSUPP; + goto out_sleep; + } + + switch (cmd) { + case SET_KEY: + ret = wl1271_cmd_set_key(wl, KEY_ADD_OR_REPLACE, + key_conf->keyidx, key_type, + key_conf->keylen, key_conf->key, + addr, tx_seq_32, tx_seq_16); + if (ret < 0) { + wl1271_error("Could not add or replace key"); + goto out_sleep; + } + + /* the default WEP key needs to be configured at least once */ + if (key_type == KEY_WEP) { + ret = wl1271_cmd_set_default_wep_key(wl, + wl->default_key); + if (ret < 0) + goto out_sleep; + } + break; + + case DISABLE_KEY: + /* The wl1271 does not allow to remove unicast keys - they + will be cleared automatically on next CMD_JOIN. Ignore the + request silently, as we dont want the mac80211 to emit + an error message. */ + if (!is_broadcast_ether_addr(addr)) + break; + + ret = wl1271_cmd_set_key(wl, KEY_REMOVE, + key_conf->keyidx, key_type, + key_conf->keylen, key_conf->key, + addr, 0, 0); + if (ret < 0) { + wl1271_error("Could not remove key"); + goto out_sleep; + } + break; + + default: + wl1271_error("Unsupported key cmd 0x%x", cmd); + ret = -EOPNOTSUPP; + break; + } + +out_sleep: + wl1271_ps_elp_sleep(wl); + +out_unlock: + mutex_unlock(&wl->mutex); + +out: + return ret; +} + +static int wl1271_op_hw_scan(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct cfg80211_scan_request *req) +{ + struct wl1271 *wl = hw->priv; + int ret; + u8 *ssid = NULL; + size_t len = 0; + + wl1271_debug(DEBUG_MAC80211, "mac80211 hw scan"); + + if (req->n_ssids) { + ssid = req->ssids[0].ssid; + len = req->ssids[0].ssid_len; + } + + mutex_lock(&wl->mutex); + + if (wl->state == WL1271_STATE_OFF) { + /* + * We cannot return -EBUSY here because cfg80211 will expect + * a call to ieee80211_scan_completed if we do - in this case + * there won't be any call. + */ + ret = -EAGAIN; + goto out; + } + + ret = wl1271_ps_elp_wakeup(wl, false); + if (ret < 0) + goto out; + + ret = wl1271_scan(hw->priv, ssid, len, req); + + wl1271_ps_elp_sleep(wl); + +out: + mutex_unlock(&wl->mutex); + + return ret; +} + +static int wl1271_op_set_rts_threshold(struct ieee80211_hw *hw, u32 value) +{ + struct wl1271 *wl = hw->priv; + int ret = 0; + + mutex_lock(&wl->mutex); + + if (unlikely(wl->state == WL1271_STATE_OFF)) { + ret = -EAGAIN; + goto out; + } + + ret = wl1271_ps_elp_wakeup(wl, false); + if (ret < 0) + goto out; + + ret = wl1271_acx_rts_threshold(wl, (u16) value); + if (ret < 0) + wl1271_warning("wl1271_op_set_rts_threshold failed: %d", ret); + + wl1271_ps_elp_sleep(wl); + +out: + mutex_unlock(&wl->mutex); + + return ret; +} + +static void wl1271_ssid_set(struct wl1271 *wl, struct sk_buff *beacon) +{ + u8 *ptr = beacon->data + + offsetof(struct ieee80211_mgmt, u.beacon.variable); + + /* find the location of the ssid in the beacon */ + while (ptr < beacon->data + beacon->len) { + if (ptr[0] == WLAN_EID_SSID) { + wl->ssid_len = ptr[1]; + memcpy(wl->ssid, ptr+2, wl->ssid_len); + return; + } + ptr += ptr[1]; + } + wl1271_error("ad-hoc beacon template has no SSID!\n"); +} + +static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, + u32 changed) +{ + enum wl1271_cmd_ps_mode mode; + struct wl1271 *wl = hw->priv; + struct ieee80211_sta *sta = ieee80211_find_sta(vif, bss_conf->bssid); + bool do_join = false; + bool set_assoc = false; + int ret; + + wl1271_debug(DEBUG_MAC80211, "mac80211 bss info changed"); + + mutex_lock(&wl->mutex); + + if (unlikely(wl->state == WL1271_STATE_OFF)) + goto out; + + ret = wl1271_ps_elp_wakeup(wl, false); + if (ret < 0) + goto out; + + if ((changed & BSS_CHANGED_BEACON_INT) && + (wl->bss_type == BSS_TYPE_IBSS)) { + wl1271_debug(DEBUG_ADHOC, "ad-hoc beacon interval updated: %d", + bss_conf->beacon_int); + + wl->beacon_int = bss_conf->beacon_int; + do_join = true; + } + + if ((changed & BSS_CHANGED_BEACON) && + (wl->bss_type == BSS_TYPE_IBSS)) { + struct sk_buff *beacon = ieee80211_beacon_get(hw, vif); + + wl1271_debug(DEBUG_ADHOC, "ad-hoc beacon updated"); + + if (beacon) { + struct ieee80211_hdr *hdr; + + wl1271_ssid_set(wl, beacon); + ret = wl1271_cmd_template_set(wl, CMD_TEMPL_BEACON, + beacon->data, + beacon->len, 0, + wl1271_min_rate_get(wl)); + + if (ret < 0) { + dev_kfree_skb(beacon); + goto out_sleep; + } + + hdr = (struct ieee80211_hdr *) beacon->data; + hdr->frame_control = cpu_to_le16( + IEEE80211_FTYPE_MGMT | + IEEE80211_STYPE_PROBE_RESP); + + ret = wl1271_cmd_template_set(wl, + CMD_TEMPL_PROBE_RESPONSE, + beacon->data, + beacon->len, 0, + wl1271_min_rate_get(wl)); + dev_kfree_skb(beacon); + if (ret < 0) + goto out_sleep; + + /* Need to update the SSID (for filtering etc) */ + do_join = true; + } + } + + if ((changed & BSS_CHANGED_BEACON_ENABLED) && + (wl->bss_type == BSS_TYPE_IBSS)) { + wl1271_debug(DEBUG_ADHOC, "ad-hoc beaconing: %s", + bss_conf->enable_beacon ? "enabled" : "disabled"); + + if (bss_conf->enable_beacon) + wl->set_bss_type = BSS_TYPE_IBSS; + else + wl->set_bss_type = BSS_TYPE_STA_BSS; + do_join = true; + } + + if (changed & BSS_CHANGED_CQM) { + bool enable = false; + if (bss_conf->cqm_rssi_thold) + enable = true; + ret = wl1271_acx_rssi_snr_trigger(wl, enable, + bss_conf->cqm_rssi_thold, + bss_conf->cqm_rssi_hyst); + if (ret < 0) + goto out; + wl->rssi_thold = bss_conf->cqm_rssi_thold; + } + + if ((changed & BSS_CHANGED_BSSID) && + /* + * Now we know the correct bssid, so we send a new join command + * and enable the BSSID filter + */ + memcmp(wl->bssid, bss_conf->bssid, ETH_ALEN)) { + memcpy(wl->bssid, bss_conf->bssid, ETH_ALEN); + + ret = wl1271_cmd_build_null_data(wl); + if (ret < 0) + goto out_sleep; + + ret = wl1271_build_qos_null_data(wl); + if (ret < 0) + goto out_sleep; + + /* filter out all packets not from this BSSID */ + wl1271_configure_filters(wl, 0); + + /* Need to update the BSSID (for filtering etc) */ + do_join = true; + } + + if (changed & BSS_CHANGED_ASSOC) { + if (bss_conf->assoc) { + u32 rates; + wl->aid = bss_conf->aid; + set_assoc = true; + + wl->ps_poll_failures = 0; + + /* + * use basic rates from AP, and determine lowest rate + * to use with control frames. + */ + rates = bss_conf->basic_rates; + wl->basic_rate_set = wl1271_tx_enabled_rates_get(wl, + rates); + wl->basic_rate = wl1271_min_rate_get(wl); + ret = wl1271_acx_rate_policies(wl); + if (ret < 0) + goto out_sleep; + + /* + * with wl1271, we don't need to update the + * beacon_int and dtim_period, because the firmware + * updates it by itself when the first beacon is + * received after a join. + */ + ret = wl1271_cmd_build_ps_poll(wl, wl->aid); + if (ret < 0) + goto out_sleep; + + /* + * The SSID is intentionally set to NULL here - the + * firmware will set the probe request with a + * broadcast SSID regardless of what we set in the + * template. + */ + ret = wl1271_cmd_build_probe_req(wl, NULL, 0, + NULL, 0, wl->band); + + /* enable the connection monitoring feature */ + ret = wl1271_acx_conn_monit_params(wl, true); + if (ret < 0) + goto out_sleep; + + /* If we want to go in PSM but we're not there yet */ + if (test_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags) && + !test_bit(WL1271_FLAG_PSM, &wl->flags)) { + mode = STATION_POWER_SAVE_MODE; + ret = wl1271_ps_set_mode(wl, mode, + wl->basic_rate, + true); + if (ret < 0) + goto out_sleep; + } + } else { + /* use defaults when not associated */ + clear_bit(WL1271_FLAG_STA_STATE_SENT, &wl->flags); + clear_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags); + wl->aid = 0; + + /* re-enable dynamic ps - just in case */ + ieee80211_enable_dyn_ps(wl->vif); + + /* revert back to minimum rates for the current band */ + wl1271_set_band_rate(wl); + wl->basic_rate = wl1271_min_rate_get(wl); + ret = wl1271_acx_rate_policies(wl); + if (ret < 0) + goto out_sleep; + + /* disable connection monitor features */ + ret = wl1271_acx_conn_monit_params(wl, false); + + /* Disable the keep-alive feature */ + ret = wl1271_acx_keep_alive_mode(wl, false); + + if (ret < 0) + goto out_sleep; + } + + } + + if (changed & BSS_CHANGED_ERP_SLOT) { + if (bss_conf->use_short_slot) + ret = wl1271_acx_slot(wl, SLOT_TIME_SHORT); + else + ret = wl1271_acx_slot(wl, SLOT_TIME_LONG); + if (ret < 0) { + wl1271_warning("Set slot time failed %d", ret); + goto out_sleep; + } + } + + if (changed & BSS_CHANGED_ERP_PREAMBLE) { + if (bss_conf->use_short_preamble) + wl1271_acx_set_preamble(wl, ACX_PREAMBLE_SHORT); + else + wl1271_acx_set_preamble(wl, ACX_PREAMBLE_LONG); + } + + if (changed & BSS_CHANGED_ERP_CTS_PROT) { + if (bss_conf->use_cts_prot) + ret = wl1271_acx_cts_protect(wl, CTSPROTECT_ENABLE); + else + ret = wl1271_acx_cts_protect(wl, CTSPROTECT_DISABLE); + if (ret < 0) { + wl1271_warning("Set ctsprotect failed %d", ret); + goto out_sleep; + } + } + + /* + * Takes care of: New association with HT enable, + * HT information change in beacon. + */ + if (sta && + (changed & BSS_CHANGED_HT) && + (bss_conf->channel_type != NL80211_CHAN_NO_HT)) { + ret = wl1271_acx_set_ht_capabilities(wl, &sta->ht_cap, true); + if (ret < 0) { + wl1271_warning("Set ht cap true failed %d", ret); + goto out_sleep; + } + ret = wl1271_acx_set_ht_information(wl, + bss_conf->ht_operation_mode); + if (ret < 0) { + wl1271_warning("Set ht information failed %d", ret); + goto out_sleep; + } + } + /* + * Takes care of: New association without HT, + * Disassociation. + */ + else if (sta && (changed & BSS_CHANGED_ASSOC)) { + ret = wl1271_acx_set_ht_capabilities(wl, &sta->ht_cap, false); + if (ret < 0) { + wl1271_warning("Set ht cap false failed %d", ret); + goto out_sleep; + } + } + + if (changed & BSS_CHANGED_ARP_FILTER) { + __be32 addr = bss_conf->arp_addr_list[0]; + WARN_ON(wl->bss_type != BSS_TYPE_STA_BSS); + + if (bss_conf->arp_addr_cnt == 1 && bss_conf->arp_filter_enabled) + ret = wl1271_acx_arp_ip_filter(wl, true, addr); + else + ret = wl1271_acx_arp_ip_filter(wl, false, addr); + + if (ret < 0) + goto out_sleep; + } + + if (do_join) { + ret = wl1271_join(wl, set_assoc); + if (ret < 0) { + wl1271_warning("cmd join failed %d", ret); + goto out_sleep; + } + } + +out_sleep: + wl1271_ps_elp_sleep(wl); + +out: + mutex_unlock(&wl->mutex); +} + +static int wl1271_op_conf_tx(struct ieee80211_hw *hw, u16 queue, + const struct ieee80211_tx_queue_params *params) +{ + struct wl1271 *wl = hw->priv; + u8 ps_scheme; + int ret; + + mutex_lock(&wl->mutex); + + wl1271_debug(DEBUG_MAC80211, "mac80211 conf tx %d", queue); + + if (unlikely(wl->state == WL1271_STATE_OFF)) { + ret = -EAGAIN; + goto out; + } + + ret = wl1271_ps_elp_wakeup(wl, false); + if (ret < 0) + goto out; + + /* the txop is confed in units of 32us by the mac80211, we need us */ + ret = wl1271_acx_ac_cfg(wl, wl1271_tx_get_queue(queue), + params->cw_min, params->cw_max, + params->aifs, params->txop << 5); + if (ret < 0) + goto out_sleep; + + if (params->uapsd) + ps_scheme = CONF_PS_SCHEME_UPSD_TRIGGER; + else + ps_scheme = CONF_PS_SCHEME_LEGACY; + + ret = wl1271_acx_tid_cfg(wl, wl1271_tx_get_queue(queue), + CONF_CHANNEL_TYPE_EDCF, + wl1271_tx_get_queue(queue), + ps_scheme, CONF_ACK_POLICY_LEGACY, 0, 0); + if (ret < 0) + goto out_sleep; + +out_sleep: + wl1271_ps_elp_sleep(wl); + +out: + mutex_unlock(&wl->mutex); + + return ret; +} + +static u64 wl1271_op_get_tsf(struct ieee80211_hw *hw) +{ + + struct wl1271 *wl = hw->priv; + u64 mactime = ULLONG_MAX; + int ret; + + wl1271_debug(DEBUG_MAC80211, "mac80211 get tsf"); + + mutex_lock(&wl->mutex); + + if (unlikely(wl->state == WL1271_STATE_OFF)) + goto out; + + ret = wl1271_ps_elp_wakeup(wl, false); + if (ret < 0) + goto out; + + ret = wl1271_acx_tsf_info(wl, &mactime); + if (ret < 0) + goto out_sleep; + +out_sleep: + wl1271_ps_elp_sleep(wl); + +out: + mutex_unlock(&wl->mutex); + return mactime; +} + +static int wl1271_op_get_survey(struct ieee80211_hw *hw, int idx, + struct survey_info *survey) +{ + struct wl1271 *wl = hw->priv; + struct ieee80211_conf *conf = &hw->conf; + + if (idx != 0) + return -ENOENT; + + survey->channel = conf->channel; + survey->filled = SURVEY_INFO_NOISE_DBM; + survey->noise = wl->noise; + + return 0; +} + +/* can't be const, mac80211 writes to this */ +static struct ieee80211_rate wl1271_rates[] = { + { .bitrate = 10, + .hw_value = CONF_HW_BIT_RATE_1MBPS, + .hw_value_short = CONF_HW_BIT_RATE_1MBPS, }, + { .bitrate = 20, + .hw_value = CONF_HW_BIT_RATE_2MBPS, + .hw_value_short = CONF_HW_BIT_RATE_2MBPS, + .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 55, + .hw_value = CONF_HW_BIT_RATE_5_5MBPS, + .hw_value_short = CONF_HW_BIT_RATE_5_5MBPS, + .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 110, + .hw_value = CONF_HW_BIT_RATE_11MBPS, + .hw_value_short = CONF_HW_BIT_RATE_11MBPS, + .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 60, + .hw_value = CONF_HW_BIT_RATE_6MBPS, + .hw_value_short = CONF_HW_BIT_RATE_6MBPS, }, + { .bitrate = 90, + .hw_value = CONF_HW_BIT_RATE_9MBPS, + .hw_value_short = CONF_HW_BIT_RATE_9MBPS, }, + { .bitrate = 120, + .hw_value = CONF_HW_BIT_RATE_12MBPS, + .hw_value_short = CONF_HW_BIT_RATE_12MBPS, }, + { .bitrate = 180, + .hw_value = CONF_HW_BIT_RATE_18MBPS, + .hw_value_short = CONF_HW_BIT_RATE_18MBPS, }, + { .bitrate = 240, + .hw_value = CONF_HW_BIT_RATE_24MBPS, + .hw_value_short = CONF_HW_BIT_RATE_24MBPS, }, + { .bitrate = 360, + .hw_value = CONF_HW_BIT_RATE_36MBPS, + .hw_value_short = CONF_HW_BIT_RATE_36MBPS, }, + { .bitrate = 480, + .hw_value = CONF_HW_BIT_RATE_48MBPS, + .hw_value_short = CONF_HW_BIT_RATE_48MBPS, }, + { .bitrate = 540, + .hw_value = CONF_HW_BIT_RATE_54MBPS, + .hw_value_short = CONF_HW_BIT_RATE_54MBPS, }, +}; + +/* + * Can't be const, mac80211 writes to this. The order of the channels here + * is designed to improve scanning. + */ +static struct ieee80211_channel wl1271_channels[] = { + { .hw_value = 1, .center_freq = 2412, .max_power = 25 }, + { .hw_value = 5, .center_freq = 2432, .max_power = 25 }, + { .hw_value = 9, .center_freq = 2452, .max_power = 25 }, + { .hw_value = 13, .center_freq = 2472, .max_power = 25 }, + { .hw_value = 4, .center_freq = 2427, .max_power = 25 }, + { .hw_value = 8, .center_freq = 2447, .max_power = 25 }, + { .hw_value = 12, .center_freq = 2467, .max_power = 25 }, + { .hw_value = 3, .center_freq = 2422, .max_power = 25 }, + { .hw_value = 7, .center_freq = 2442, .max_power = 25 }, + { .hw_value = 11, .center_freq = 2462, .max_power = 25 }, + { .hw_value = 2, .center_freq = 2417, .max_power = 25 }, + { .hw_value = 6, .center_freq = 2437, .max_power = 25 }, + { .hw_value = 10, .center_freq = 2457, .max_power = 25 }, +}; + +/* mapping to indexes for wl1271_rates */ +static const u8 wl1271_rate_to_idx_2ghz[] = { + /* MCS rates are used only with 11n */ + 7, /* CONF_HW_RXTX_RATE_MCS7 */ + 6, /* CONF_HW_RXTX_RATE_MCS6 */ + 5, /* CONF_HW_RXTX_RATE_MCS5 */ + 4, /* CONF_HW_RXTX_RATE_MCS4 */ + 3, /* CONF_HW_RXTX_RATE_MCS3 */ + 2, /* CONF_HW_RXTX_RATE_MCS2 */ + 1, /* CONF_HW_RXTX_RATE_MCS1 */ + 0, /* CONF_HW_RXTX_RATE_MCS0 */ + + 11, /* CONF_HW_RXTX_RATE_54 */ + 10, /* CONF_HW_RXTX_RATE_48 */ + 9, /* CONF_HW_RXTX_RATE_36 */ + 8, /* CONF_HW_RXTX_RATE_24 */ + + /* TI-specific rate */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_22 */ + + 7, /* CONF_HW_RXTX_RATE_18 */ + 6, /* CONF_HW_RXTX_RATE_12 */ + 3, /* CONF_HW_RXTX_RATE_11 */ + 5, /* CONF_HW_RXTX_RATE_9 */ + 4, /* CONF_HW_RXTX_RATE_6 */ + 2, /* CONF_HW_RXTX_RATE_5_5 */ + 1, /* CONF_HW_RXTX_RATE_2 */ + 0 /* CONF_HW_RXTX_RATE_1 */ +}; + +/* 11n STA capabilities */ +#define HW_RX_HIGHEST_RATE 72 + +#ifdef CONFIG_WL12XX_HT +#define WL12XX_HT_CAP { \ + .cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20, \ + .ht_supported = true, \ + .ampdu_factor = IEEE80211_HT_MAX_AMPDU_8K, \ + .ampdu_density = IEEE80211_HT_MPDU_DENSITY_8, \ + .mcs = { \ + .rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, }, \ + .rx_highest = cpu_to_le16(HW_RX_HIGHEST_RATE), \ + .tx_params = IEEE80211_HT_MCS_TX_DEFINED, \ + }, \ +} +#else +#define WL12XX_HT_CAP { \ + .ht_supported = false, \ +} +#endif + +/* can't be const, mac80211 writes to this */ +static struct ieee80211_supported_band wl1271_band_2ghz = { + .channels = wl1271_channels, + .n_channels = ARRAY_SIZE(wl1271_channels), + .bitrates = wl1271_rates, + .n_bitrates = ARRAY_SIZE(wl1271_rates), + .ht_cap = WL12XX_HT_CAP, +}; + +/* 5 GHz data rates for WL1273 */ +static struct ieee80211_rate wl1271_rates_5ghz[] = { + { .bitrate = 60, + .hw_value = CONF_HW_BIT_RATE_6MBPS, + .hw_value_short = CONF_HW_BIT_RATE_6MBPS, }, + { .bitrate = 90, + .hw_value = CONF_HW_BIT_RATE_9MBPS, + .hw_value_short = CONF_HW_BIT_RATE_9MBPS, }, + { .bitrate = 120, + .hw_value = CONF_HW_BIT_RATE_12MBPS, + .hw_value_short = CONF_HW_BIT_RATE_12MBPS, }, + { .bitrate = 180, + .hw_value = CONF_HW_BIT_RATE_18MBPS, + .hw_value_short = CONF_HW_BIT_RATE_18MBPS, }, + { .bitrate = 240, + .hw_value = CONF_HW_BIT_RATE_24MBPS, + .hw_value_short = CONF_HW_BIT_RATE_24MBPS, }, + { .bitrate = 360, + .hw_value = CONF_HW_BIT_RATE_36MBPS, + .hw_value_short = CONF_HW_BIT_RATE_36MBPS, }, + { .bitrate = 480, + .hw_value = CONF_HW_BIT_RATE_48MBPS, + .hw_value_short = CONF_HW_BIT_RATE_48MBPS, }, + { .bitrate = 540, + .hw_value = CONF_HW_BIT_RATE_54MBPS, + .hw_value_short = CONF_HW_BIT_RATE_54MBPS, }, +}; + +/* + * 5 GHz band channels for WL1273 - can't be const, mac80211 writes to this. + * The order of the channels here is designed to improve scanning. + */ +static struct ieee80211_channel wl1271_channels_5ghz[] = { + { .hw_value = 183, .center_freq = 4915}, + { .hw_value = 188, .center_freq = 4940}, + { .hw_value = 8, .center_freq = 5040}, + { .hw_value = 34, .center_freq = 5170}, + { .hw_value = 44, .center_freq = 5220}, + { .hw_value = 60, .center_freq = 5300}, + { .hw_value = 112, .center_freq = 5560}, + { .hw_value = 132, .center_freq = 5660}, + { .hw_value = 157, .center_freq = 5785}, + { .hw_value = 184, .center_freq = 4920}, + { .hw_value = 189, .center_freq = 4945}, + { .hw_value = 9, .center_freq = 5045}, + { .hw_value = 36, .center_freq = 5180}, + { .hw_value = 46, .center_freq = 5230}, + { .hw_value = 64, .center_freq = 5320}, + { .hw_value = 116, .center_freq = 5580}, + { .hw_value = 136, .center_freq = 5680}, + { .hw_value = 192, .center_freq = 4960}, + { .hw_value = 11, .center_freq = 5055}, + { .hw_value = 38, .center_freq = 5190}, + { .hw_value = 48, .center_freq = 5240}, + { .hw_value = 100, .center_freq = 5500}, + { .hw_value = 120, .center_freq = 5600}, + { .hw_value = 140, .center_freq = 5700}, + { .hw_value = 185, .center_freq = 4925}, + { .hw_value = 196, .center_freq = 4980}, + { .hw_value = 12, .center_freq = 5060}, + { .hw_value = 40, .center_freq = 5200}, + { .hw_value = 52, .center_freq = 5260}, + { .hw_value = 104, .center_freq = 5520}, + { .hw_value = 124, .center_freq = 5620}, + { .hw_value = 149, .center_freq = 5745}, + { .hw_value = 161, .center_freq = 5805}, + { .hw_value = 187, .center_freq = 4935}, + { .hw_value = 7, .center_freq = 5035}, + { .hw_value = 16, .center_freq = 5080}, + { .hw_value = 42, .center_freq = 5210}, + { .hw_value = 56, .center_freq = 5280}, + { .hw_value = 108, .center_freq = 5540}, + { .hw_value = 128, .center_freq = 5640}, + { .hw_value = 153, .center_freq = 5765}, + { .hw_value = 165, .center_freq = 5825}, +}; + +/* mapping to indexes for wl1271_rates_5ghz */ +static const u8 wl1271_rate_to_idx_5ghz[] = { + /* MCS rates are used only with 11n */ + 7, /* CONF_HW_RXTX_RATE_MCS7 */ + 6, /* CONF_HW_RXTX_RATE_MCS6 */ + 5, /* CONF_HW_RXTX_RATE_MCS5 */ + 4, /* CONF_HW_RXTX_RATE_MCS4 */ + 3, /* CONF_HW_RXTX_RATE_MCS3 */ + 2, /* CONF_HW_RXTX_RATE_MCS2 */ + 1, /* CONF_HW_RXTX_RATE_MCS1 */ + 0, /* CONF_HW_RXTX_RATE_MCS0 */ + + 7, /* CONF_HW_RXTX_RATE_54 */ + 6, /* CONF_HW_RXTX_RATE_48 */ + 5, /* CONF_HW_RXTX_RATE_36 */ + 4, /* CONF_HW_RXTX_RATE_24 */ + + /* TI-specific rate */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_22 */ + + 3, /* CONF_HW_RXTX_RATE_18 */ + 2, /* CONF_HW_RXTX_RATE_12 */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_11 */ + 1, /* CONF_HW_RXTX_RATE_9 */ + 0, /* CONF_HW_RXTX_RATE_6 */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_5_5 */ + CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_2 */ + CONF_HW_RXTX_RATE_UNSUPPORTED /* CONF_HW_RXTX_RATE_1 */ +}; + +static struct ieee80211_supported_band wl1271_band_5ghz = { + .channels = wl1271_channels_5ghz, + .n_channels = ARRAY_SIZE(wl1271_channels_5ghz), + .bitrates = wl1271_rates_5ghz, + .n_bitrates = ARRAY_SIZE(wl1271_rates_5ghz), + .ht_cap = WL12XX_HT_CAP, +}; + +static const u8 *wl1271_band_rate_to_idx[] = { + [IEEE80211_BAND_2GHZ] = wl1271_rate_to_idx_2ghz, + [IEEE80211_BAND_5GHZ] = wl1271_rate_to_idx_5ghz +}; + +static const struct ieee80211_ops wl1271_ops = { + .start = wl1271_op_start, + .stop = wl1271_op_stop, + .add_interface = wl1271_op_add_interface, + .remove_interface = wl1271_op_remove_interface, + .config = wl1271_op_config, + .prepare_multicast = wl1271_op_prepare_multicast, + .configure_filter = wl1271_op_configure_filter, + .tx = wl1271_op_tx, + .set_key = wl1271_op_set_key, + .hw_scan = wl1271_op_hw_scan, + .bss_info_changed = wl1271_op_bss_info_changed, + .set_rts_threshold = wl1271_op_set_rts_threshold, + .conf_tx = wl1271_op_conf_tx, + .get_tsf = wl1271_op_get_tsf, + .get_survey = wl1271_op_get_survey, + CFG80211_TESTMODE_CMD(wl1271_tm_cmd) +}; + + +u8 wl1271_rate_to_idx(int rate, enum ieee80211_band band) +{ + u8 idx; + + BUG_ON(band >= sizeof(wl1271_band_rate_to_idx)/sizeof(u8 *)); + + if (unlikely(rate >= CONF_HW_RXTX_RATE_MAX)) { + wl1271_error("Illegal RX rate from HW: %d", rate); + return 0; + } + + idx = wl1271_band_rate_to_idx[band][rate]; + if (unlikely(idx == CONF_HW_RXTX_RATE_UNSUPPORTED)) { + wl1271_error("Unsupported RX rate from HW: %d", rate); + return 0; + } + + return idx; +} + +static ssize_t wl1271_sysfs_show_bt_coex_state(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct wl1271 *wl = dev_get_drvdata(dev); + ssize_t len; + + len = PAGE_SIZE; + + mutex_lock(&wl->mutex); + len = snprintf(buf, len, "%d\n\n0 - off\n1 - on\n", + wl->sg_enabled); + mutex_unlock(&wl->mutex); + + return len; + +} + +static ssize_t wl1271_sysfs_store_bt_coex_state(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct wl1271 *wl = dev_get_drvdata(dev); + unsigned long res; + int ret; + + ret = strict_strtoul(buf, 10, &res); + + if (ret < 0) { + wl1271_warning("incorrect value written to bt_coex_mode"); + return count; + } + + mutex_lock(&wl->mutex); + + res = !!res; + + if (res == wl->sg_enabled) + goto out; + + wl->sg_enabled = res; + + if (wl->state == WL1271_STATE_OFF) + goto out; + + ret = wl1271_ps_elp_wakeup(wl, false); + if (ret < 0) + goto out; + + wl1271_acx_sg_enable(wl, wl->sg_enabled); + wl1271_ps_elp_sleep(wl); + + out: + mutex_unlock(&wl->mutex); + return count; +} + +static DEVICE_ATTR(bt_coex_state, S_IRUGO | S_IWUSR, + wl1271_sysfs_show_bt_coex_state, + wl1271_sysfs_store_bt_coex_state); + +static ssize_t wl1271_sysfs_show_hw_pg_ver(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct wl1271 *wl = dev_get_drvdata(dev); + ssize_t len; + + len = PAGE_SIZE; + + mutex_lock(&wl->mutex); + if (wl->hw_pg_ver >= 0) + len = snprintf(buf, len, "%d\n", wl->hw_pg_ver); + else + len = snprintf(buf, len, "n/a\n"); + mutex_unlock(&wl->mutex); + + return len; +} + +static DEVICE_ATTR(hw_pg_ver, S_IRUGO | S_IWUSR, + wl1271_sysfs_show_hw_pg_ver, NULL); + +int wl1271_register_hw(struct wl1271 *wl) +{ + int ret; + + if (wl->mac80211_registered) + return 0; + + SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr); + + ret = ieee80211_register_hw(wl->hw); + if (ret < 0) { + wl1271_error("unable to register mac80211 hw: %d", ret); + return ret; + } + + wl->mac80211_registered = true; + + register_netdevice_notifier(&wl1271_dev_notifier); + + wl1271_notice("loaded"); + + return 0; +} +EXPORT_SYMBOL_GPL(wl1271_register_hw); + +void wl1271_unregister_hw(struct wl1271 *wl) +{ + unregister_netdevice_notifier(&wl1271_dev_notifier); + ieee80211_unregister_hw(wl->hw); + wl->mac80211_registered = false; + +} +EXPORT_SYMBOL_GPL(wl1271_unregister_hw); + +int wl1271_init_ieee80211(struct wl1271 *wl) +{ + static const u32 cipher_suites[] = { + WLAN_CIPHER_SUITE_WEP40, + WLAN_CIPHER_SUITE_WEP104, + WLAN_CIPHER_SUITE_TKIP, + WLAN_CIPHER_SUITE_CCMP, + WL1271_CIPHER_SUITE_GEM, + }; + + /* The tx descriptor buffer and the TKIP space. */ + wl->hw->extra_tx_headroom = WL1271_TKIP_IV_SPACE + + sizeof(struct wl1271_tx_hw_descr); + + /* unit us */ + /* FIXME: find a proper value */ + wl->hw->channel_change_time = 10000; + wl->hw->max_listen_interval = wl->conf.conn.max_listen_interval; + + wl->hw->flags = IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_BEACON_FILTER | + IEEE80211_HW_SUPPORTS_PS | + IEEE80211_HW_SUPPORTS_UAPSD | + IEEE80211_HW_HAS_RATE_CONTROL | + IEEE80211_HW_CONNECTION_MONITOR | + IEEE80211_HW_SUPPORTS_CQM_RSSI; + + wl->hw->wiphy->cipher_suites = cipher_suites; + wl->hw->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites); + + wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_ADHOC); + wl->hw->wiphy->max_scan_ssids = 1; + wl->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &wl1271_band_2ghz; + wl->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &wl1271_band_5ghz; + + wl->hw->queues = 4; + wl->hw->max_rates = 1; + + SET_IEEE80211_DEV(wl->hw, wl1271_wl_to_dev(wl)); + + return 0; +} +EXPORT_SYMBOL_GPL(wl1271_init_ieee80211); + +#define WL1271_DEFAULT_CHANNEL 0 + +struct ieee80211_hw *wl1271_alloc_hw(void) +{ + struct ieee80211_hw *hw; + struct platform_device *plat_dev = NULL; + struct wl1271 *wl; + int i, ret; + unsigned int order; + + hw = ieee80211_alloc_hw(sizeof(*wl), &wl1271_ops); + if (!hw) { + wl1271_error("could not alloc ieee80211_hw"); + ret = -ENOMEM; + goto err_hw_alloc; + } + + plat_dev = kmemdup(&wl1271_device, sizeof(wl1271_device), GFP_KERNEL); + if (!plat_dev) { + wl1271_error("could not allocate platform_device"); + ret = -ENOMEM; + goto err_plat_alloc; + } + + wl = hw->priv; + memset(wl, 0, sizeof(*wl)); + + INIT_LIST_HEAD(&wl->list); + + wl->hw = hw; + wl->plat_dev = plat_dev; + + skb_queue_head_init(&wl->tx_queue); + + INIT_DELAYED_WORK(&wl->elp_work, wl1271_elp_work); + INIT_DELAYED_WORK(&wl->pspoll_work, wl1271_pspoll_work); + INIT_WORK(&wl->irq_work, wl1271_irq_work); + INIT_WORK(&wl->tx_work, wl1271_tx_work); + INIT_WORK(&wl->recovery_work, wl1271_recovery_work); + INIT_DELAYED_WORK(&wl->scan_complete_work, wl1271_scan_complete_work); + wl->channel = WL1271_DEFAULT_CHANNEL; + wl->beacon_int = WL1271_DEFAULT_BEACON_INT; + wl->default_key = 0; + wl->rx_counter = 0; + wl->rx_config = WL1271_DEFAULT_RX_CONFIG; + wl->rx_filter = WL1271_DEFAULT_RX_FILTER; + wl->psm_entry_retry = 0; + wl->power_level = WL1271_DEFAULT_POWER_LEVEL; + wl->basic_rate_set = CONF_TX_RATE_MASK_BASIC; + wl->basic_rate = CONF_TX_RATE_MASK_BASIC; + wl->rate_set = CONF_TX_RATE_MASK_BASIC; + wl->sta_rate_set = 0; + wl->band = IEEE80211_BAND_2GHZ; + wl->vif = NULL; + wl->flags = 0; + wl->sg_enabled = true; + wl->hw_pg_ver = -1; + + memset(wl->tx_frames_map, 0, sizeof(wl->tx_frames_map)); + for (i = 0; i < ACX_TX_DESCRIPTORS; i++) + wl->tx_frames[i] = NULL; + + spin_lock_init(&wl->wl_lock); + + wl->state = WL1271_STATE_OFF; + mutex_init(&wl->mutex); + + /* Apply default driver configuration. */ + wl1271_conf_init(wl); + + wl1271_debugfs_init(wl); + + order = get_order(WL1271_AGGR_BUFFER_SIZE); + wl->aggr_buf = (u8 *)__get_free_pages(GFP_KERNEL, order); + if (!wl->aggr_buf) { + ret = -ENOMEM; + goto err_hw; + } + + /* Register platform device */ + ret = platform_device_register(wl->plat_dev); + if (ret) { + wl1271_error("couldn't register platform device"); + goto err_aggr; + } + dev_set_drvdata(&wl->plat_dev->dev, wl); + + /* Create sysfs file to control bt coex state */ + ret = device_create_file(&wl->plat_dev->dev, &dev_attr_bt_coex_state); + if (ret < 0) { + wl1271_error("failed to create sysfs file bt_coex_state"); + goto err_platform; + } + + /* Create sysfs file to get HW PG version */ + ret = device_create_file(&wl->plat_dev->dev, &dev_attr_hw_pg_ver); + if (ret < 0) { + wl1271_error("failed to create sysfs file hw_pg_ver"); + goto err_bt_coex_state; + } + + return hw; + +err_bt_coex_state: + device_remove_file(&wl->plat_dev->dev, &dev_attr_bt_coex_state); + +err_platform: + platform_device_unregister(wl->plat_dev); + +err_aggr: + free_pages((unsigned long)wl->aggr_buf, order); + +err_hw: + wl1271_debugfs_exit(wl); + kfree(plat_dev); + +err_plat_alloc: + ieee80211_free_hw(hw); + +err_hw_alloc: + + return ERR_PTR(ret); +} +EXPORT_SYMBOL_GPL(wl1271_alloc_hw); + +int wl1271_free_hw(struct wl1271 *wl) +{ + platform_device_unregister(wl->plat_dev); + free_pages((unsigned long)wl->aggr_buf, + get_order(WL1271_AGGR_BUFFER_SIZE)); + kfree(wl->plat_dev); + + wl1271_debugfs_exit(wl); + + vfree(wl->fw); + wl->fw = NULL; + kfree(wl->nvs); + wl->nvs = NULL; + + kfree(wl->fw_status); + kfree(wl->tx_res_if); + + ieee80211_free_hw(wl->hw); + + return 0; +} +EXPORT_SYMBOL_GPL(wl1271_free_hw); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Luciano Coelho "); +MODULE_AUTHOR("Juuso Oikarinen "); diff --git a/drivers/net/wireless/wl12xx/ps.c b/drivers/net/wireless/wl12xx/ps.c new file mode 100644 index 00000000000..60a3738eadb --- /dev/null +++ b/drivers/net/wireless/wl12xx/ps.c @@ -0,0 +1,178 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include "reg.h" +#include "ps.h" +#include "io.h" + +#define WL1271_WAKEUP_TIMEOUT 500 + +void wl1271_elp_work(struct work_struct *work) +{ + struct delayed_work *dwork; + struct wl1271 *wl; + + dwork = container_of(work, struct delayed_work, work); + wl = container_of(dwork, struct wl1271, elp_work); + + wl1271_debug(DEBUG_PSM, "elp work"); + + mutex_lock(&wl->mutex); + + if (unlikely(wl->state == WL1271_STATE_OFF)) + goto out; + + if (test_bit(WL1271_FLAG_IN_ELP, &wl->flags) || + (!test_bit(WL1271_FLAG_PSM, &wl->flags) && + !test_bit(WL1271_FLAG_IDLE, &wl->flags))) + goto out; + + wl1271_debug(DEBUG_PSM, "chip to elp"); + wl1271_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_SLEEP); + set_bit(WL1271_FLAG_IN_ELP, &wl->flags); + +out: + mutex_unlock(&wl->mutex); +} + +#define ELP_ENTRY_DELAY 5 + +/* Routines to toggle sleep mode while in ELP */ +void wl1271_ps_elp_sleep(struct wl1271 *wl) +{ + if (test_bit(WL1271_FLAG_PSM, &wl->flags) || + test_bit(WL1271_FLAG_IDLE, &wl->flags)) { + cancel_delayed_work(&wl->elp_work); + ieee80211_queue_delayed_work(wl->hw, &wl->elp_work, + msecs_to_jiffies(ELP_ENTRY_DELAY)); + } +} + +int wl1271_ps_elp_wakeup(struct wl1271 *wl, bool chip_awake) +{ + DECLARE_COMPLETION_ONSTACK(compl); + unsigned long flags; + int ret; + u32 start_time = jiffies; + bool pending = false; + + if (!test_bit(WL1271_FLAG_IN_ELP, &wl->flags)) + return 0; + + wl1271_debug(DEBUG_PSM, "waking up chip from elp"); + + /* + * The spinlock is required here to synchronize both the work and + * the completion variable in one entity. + */ + spin_lock_irqsave(&wl->wl_lock, flags); + if (work_pending(&wl->irq_work) || chip_awake) + pending = true; + else + wl->elp_compl = &compl; + spin_unlock_irqrestore(&wl->wl_lock, flags); + + wl1271_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_WAKE_UP); + + if (!pending) { + ret = wait_for_completion_timeout( + &compl, msecs_to_jiffies(WL1271_WAKEUP_TIMEOUT)); + if (ret == 0) { + wl1271_error("ELP wakeup timeout!"); + ieee80211_queue_work(wl->hw, &wl->recovery_work); + ret = -ETIMEDOUT; + goto err; + } else if (ret < 0) { + wl1271_error("ELP wakeup completion error."); + goto err; + } + } + + clear_bit(WL1271_FLAG_IN_ELP, &wl->flags); + + wl1271_debug(DEBUG_PSM, "wakeup time: %u ms", + jiffies_to_msecs(jiffies - start_time)); + goto out; + +err: + spin_lock_irqsave(&wl->wl_lock, flags); + wl->elp_compl = NULL; + spin_unlock_irqrestore(&wl->wl_lock, flags); + return ret; + +out: + return 0; +} + +int wl1271_ps_set_mode(struct wl1271 *wl, enum wl1271_cmd_ps_mode mode, + u32 rates, bool send) +{ + int ret; + + switch (mode) { + case STATION_POWER_SAVE_MODE: + wl1271_debug(DEBUG_PSM, "entering psm"); + + ret = wl1271_acx_wake_up_conditions(wl); + if (ret < 0) { + wl1271_error("couldn't set wake up conditions"); + return ret; + } + + ret = wl1271_cmd_ps_mode(wl, STATION_POWER_SAVE_MODE, + rates, send); + if (ret < 0) + return ret; + + set_bit(WL1271_FLAG_PSM, &wl->flags); + break; + case STATION_ACTIVE_MODE: + default: + wl1271_debug(DEBUG_PSM, "leaving psm"); + ret = wl1271_ps_elp_wakeup(wl, false); + if (ret < 0) + return ret; + + /* disable beacon early termination */ + ret = wl1271_acx_bet_enable(wl, false); + if (ret < 0) + return ret; + + /* disable beacon filtering */ + ret = wl1271_acx_beacon_filter_opt(wl, false); + if (ret < 0) + return ret; + + ret = wl1271_cmd_ps_mode(wl, STATION_ACTIVE_MODE, + rates, send); + if (ret < 0) + return ret; + + clear_bit(WL1271_FLAG_PSM, &wl->flags); + break; + } + + return ret; +} + + diff --git a/drivers/net/wireless/wl12xx/ps.h b/drivers/net/wireless/wl12xx/ps.h new file mode 100644 index 00000000000..8415060f08e --- /dev/null +++ b/drivers/net/wireless/wl12xx/ps.h @@ -0,0 +1,36 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __PS_H__ +#define __PS_H__ + +#include "wl12xx.h" +#include "acx.h" + +int wl1271_ps_set_mode(struct wl1271 *wl, enum wl1271_cmd_ps_mode mode, + u32 rates, bool send); +void wl1271_ps_elp_sleep(struct wl1271 *wl); +int wl1271_ps_elp_wakeup(struct wl1271 *wl, bool chip_awake); +void wl1271_elp_work(struct work_struct *work); + +#endif /* __WL1271_PS_H__ */ diff --git a/drivers/net/wireless/wl12xx/reg.h b/drivers/net/wireless/wl12xx/reg.h new file mode 100644 index 00000000000..99096077152 --- /dev/null +++ b/drivers/net/wireless/wl12xx/reg.h @@ -0,0 +1,614 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 1998-2009 Texas Instruments. All rights reserved. + * Copyright (C) 2009 Nokia Corporation + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __REG_H__ +#define __REG_H__ + +#include + +#define REGISTERS_BASE 0x00300000 +#define DRPW_BASE 0x00310000 + +#define REGISTERS_DOWN_SIZE 0x00008800 +#define REGISTERS_WORK_SIZE 0x0000b000 + +#define HW_ACCESS_ELP_CTRL_REG_ADDR 0x1FFFC +#define FW_STATUS_ADDR (0x14FC0 + 0xA000) + +/* ELP register commands */ +#define ELPCTRL_WAKE_UP 0x1 +#define ELPCTRL_WAKE_UP_WLAN_READY 0x5 +#define ELPCTRL_SLEEP 0x0 +/* ELP WLAN_READY bit */ +#define ELPCTRL_WLAN_READY 0x2 + +/*=============================================== + Host Software Reset - 32bit RW + ------------------------------------------ + [31:1] Reserved + 0 SOFT_RESET Soft Reset - When this bit is set, + it holds the Wlan hardware in a soft reset state. + This reset disables all MAC and baseband processor + clocks except the CardBus/PCI interface clock. + It also initializes all MAC state machines except + the host interface. It does not reload the + contents of the EEPROM. When this bit is cleared + (not self-clearing), the Wlan hardware + exits the software reset state. +===============================================*/ +#define ACX_REG_SLV_SOFT_RESET (REGISTERS_BASE + 0x0000) + +#define WL1271_SLV_REG_DATA (REGISTERS_BASE + 0x0008) +#define WL1271_SLV_REG_ADATA (REGISTERS_BASE + 0x000c) +#define WL1271_SLV_MEM_DATA (REGISTERS_BASE + 0x0018) + +#define ACX_REG_INTERRUPT_TRIG (REGISTERS_BASE + 0x0474) +#define ACX_REG_INTERRUPT_TRIG_H (REGISTERS_BASE + 0x0478) + +/*============================================= + Host Interrupt Mask Register - 32bit (RW) + ------------------------------------------ + Setting a bit in this register masks the + corresponding interrupt to the host. + 0 - RX0 - Rx first dubble buffer Data Interrupt + 1 - TXD - Tx Data Interrupt + 2 - TXXFR - Tx Transfer Interrupt + 3 - RX1 - Rx second dubble buffer Data Interrupt + 4 - RXXFR - Rx Transfer Interrupt + 5 - EVENT_A - Event Mailbox interrupt + 6 - EVENT_B - Event Mailbox interrupt + 7 - WNONHST - Wake On Host Interrupt + 8 - TRACE_A - Debug Trace interrupt + 9 - TRACE_B - Debug Trace interrupt + 10 - CDCMP - Command Complete Interrupt + 11 - + 12 - + 13 - + 14 - ICOMP - Initialization Complete Interrupt + 16 - SG SE - Soft Gemini - Sense enable interrupt + 17 - SG SD - Soft Gemini - Sense disable interrupt + 18 - - + 19 - - + 20 - - + 21- - + Default: 0x0001 +*==============================================*/ +#define ACX_REG_INTERRUPT_MASK (REGISTERS_BASE + 0x04DC) + +/*============================================= + Host Interrupt Mask Set 16bit, (Write only) + ------------------------------------------ + Setting a bit in this register sets + the corresponding bin in ACX_HINT_MASK register + without effecting the mask + state of other bits (0 = no effect). +==============================================*/ +#define ACX_REG_HINT_MASK_SET (REGISTERS_BASE + 0x04E0) + +/*============================================= + Host Interrupt Mask Clear 16bit,(Write only) + ------------------------------------------ + Setting a bit in this register clears + the corresponding bin in ACX_HINT_MASK register + without effecting the mask + state of other bits (0 = no effect). +=============================================*/ +#define ACX_REG_HINT_MASK_CLR (REGISTERS_BASE + 0x04E4) + +/*============================================= + Host Interrupt Status Nondestructive Read + 16bit,(Read only) + ------------------------------------------ + The host can read this register to determine + which interrupts are active. + Reading this register doesn't + effect its content. +=============================================*/ +#define ACX_REG_INTERRUPT_NO_CLEAR (REGISTERS_BASE + 0x04E8) + +/*============================================= + Host Interrupt Status Clear on Read Register + 16bit,(Read only) + ------------------------------------------ + The host can read this register to determine + which interrupts are active. + Reading this register clears it, + thus making all interrupts inactive. +==============================================*/ +#define ACX_REG_INTERRUPT_CLEAR (REGISTERS_BASE + 0x04F8) + +/*============================================= + Host Interrupt Acknowledge Register + 16bit,(Write only) + ------------------------------------------ + The host can set individual bits in this + register to clear (acknowledge) the corresp. + interrupt status bits in the HINT_STS_CLR and + HINT_STS_ND registers, thus making the + assotiated interrupt inactive. (0-no effect) +==============================================*/ +#define ACX_REG_INTERRUPT_ACK (REGISTERS_BASE + 0x04F0) + +#define RX_DRIVER_COUNTER_ADDRESS (REGISTERS_BASE + 0x0538) + +/* Device Configuration registers*/ +#define SOR_CFG (REGISTERS_BASE + 0x0800) + +/* Embedded ARM CPU Control */ + +/*=============================================== + Halt eCPU - 32bit RW + ------------------------------------------ + 0 HALT_ECPU Halt Embedded CPU - This bit is the + compliment of bit 1 (MDATA2) in the SOR_CFG register. + During a hardware reset, this bit holds + the inverse of MDATA2. + When downloading firmware from the host, + set this bit (pull down MDATA2). + The host clears this bit after downloading the firmware into + zero-wait-state SSRAM. + When loading firmware from Flash, clear this bit (pull up MDATA2) + so that the eCPU can run the bootloader code in Flash + HALT_ECPU eCPU State + -------------------- + 1 halt eCPU + 0 enable eCPU + ===============================================*/ +#define ACX_REG_ECPU_CONTROL (REGISTERS_BASE + 0x0804) + +#define HI_CFG (REGISTERS_BASE + 0x0808) + +/*=============================================== + EEPROM Burst Read Start - 32bit RW + ------------------------------------------ + [31:1] Reserved + 0 ACX_EE_START - EEPROM Burst Read Start 0 + Setting this bit starts a burst read from + the external EEPROM. + If this bit is set (after reset) before an EEPROM read/write, + the burst read starts at EEPROM address 0. + Otherwise, it starts at the address + following the address of the previous access. + TheWlan hardware hardware clears this bit automatically. + + Default: 0x00000000 +*================================================*/ +#define ACX_REG_EE_START (REGISTERS_BASE + 0x080C) + +#define OCP_POR_CTR (REGISTERS_BASE + 0x09B4) +#define OCP_DATA_WRITE (REGISTERS_BASE + 0x09B8) +#define OCP_DATA_READ (REGISTERS_BASE + 0x09BC) +#define OCP_CMD (REGISTERS_BASE + 0x09C0) + +#define WL1271_HOST_WR_ACCESS (REGISTERS_BASE + 0x09F8) + +#define CHIP_ID_B (REGISTERS_BASE + 0x5674) + +#define CHIP_ID_1271_PG10 (0x4030101) +#define CHIP_ID_1271_PG20 (0x4030111) + +#define ENABLE (REGISTERS_BASE + 0x5450) + +/* Power Management registers */ +#define ELP_CFG_MODE (REGISTERS_BASE + 0x5804) +#define ELP_CMD (REGISTERS_BASE + 0x5808) +#define PLL_CAL_TIME (REGISTERS_BASE + 0x5810) +#define CLK_REQ_TIME (REGISTERS_BASE + 0x5814) +#define CLK_BUF_TIME (REGISTERS_BASE + 0x5818) + +#define CFG_PLL_SYNC_CNT (REGISTERS_BASE + 0x5820) + +/* Scratch Pad registers*/ +#define SCR_PAD0 (REGISTERS_BASE + 0x5608) +#define SCR_PAD1 (REGISTERS_BASE + 0x560C) +#define SCR_PAD2 (REGISTERS_BASE + 0x5610) +#define SCR_PAD3 (REGISTERS_BASE + 0x5614) +#define SCR_PAD4 (REGISTERS_BASE + 0x5618) +#define SCR_PAD4_SET (REGISTERS_BASE + 0x561C) +#define SCR_PAD4_CLR (REGISTERS_BASE + 0x5620) +#define SCR_PAD5 (REGISTERS_BASE + 0x5624) +#define SCR_PAD5_SET (REGISTERS_BASE + 0x5628) +#define SCR_PAD5_CLR (REGISTERS_BASE + 0x562C) +#define SCR_PAD6 (REGISTERS_BASE + 0x5630) +#define SCR_PAD7 (REGISTERS_BASE + 0x5634) +#define SCR_PAD8 (REGISTERS_BASE + 0x5638) +#define SCR_PAD9 (REGISTERS_BASE + 0x563C) + +/* Spare registers*/ +#define SPARE_A1 (REGISTERS_BASE + 0x0994) +#define SPARE_A2 (REGISTERS_BASE + 0x0998) +#define SPARE_A3 (REGISTERS_BASE + 0x099C) +#define SPARE_A4 (REGISTERS_BASE + 0x09A0) +#define SPARE_A5 (REGISTERS_BASE + 0x09A4) +#define SPARE_A6 (REGISTERS_BASE + 0x09A8) +#define SPARE_A7 (REGISTERS_BASE + 0x09AC) +#define SPARE_A8 (REGISTERS_BASE + 0x09B0) +#define SPARE_B1 (REGISTERS_BASE + 0x5420) +#define SPARE_B2 (REGISTERS_BASE + 0x5424) +#define SPARE_B3 (REGISTERS_BASE + 0x5428) +#define SPARE_B4 (REGISTERS_BASE + 0x542C) +#define SPARE_B5 (REGISTERS_BASE + 0x5430) +#define SPARE_B6 (REGISTERS_BASE + 0x5434) +#define SPARE_B7 (REGISTERS_BASE + 0x5438) +#define SPARE_B8 (REGISTERS_BASE + 0x543C) + +#define PLL_PARAMETERS (REGISTERS_BASE + 0x6040) +#define WU_COUNTER_PAUSE (REGISTERS_BASE + 0x6008) +#define WELP_ARM_COMMAND (REGISTERS_BASE + 0x6100) +#define DRPW_SCRATCH_START (DRPW_BASE + 0x002C) + + +#define ACX_SLV_SOFT_RESET_BIT BIT(1) +#define ACX_REG_EEPROM_START_BIT BIT(1) + +/* Command/Information Mailbox Pointers */ + +/*=============================================== + Command Mailbox Pointer - 32bit RW + ------------------------------------------ + This register holds the start address of + the command mailbox located in the Wlan hardware memory. + The host must read this pointer after a reset to + find the location of the command mailbox. + The Wlan hardware initializes the command mailbox + pointer with the default address of the command mailbox. + The command mailbox pointer is not valid until after + the host receives the Init Complete interrupt from + the Wlan hardware. + ===============================================*/ +#define REG_COMMAND_MAILBOX_PTR (SCR_PAD0) + +/*=============================================== + Information Mailbox Pointer - 32bit RW + ------------------------------------------ + This register holds the start address of + the information mailbox located in the Wlan hardware memory. + The host must read this pointer after a reset to find + the location of the information mailbox. + The Wlan hardware initializes the information mailbox pointer + with the default address of the information mailbox. + The information mailbox pointer is not valid + until after the host receives the Init Complete interrupt from + the Wlan hardware. + ===============================================*/ +#define REG_EVENT_MAILBOX_PTR (SCR_PAD1) + + +/* Misc */ + +#define REG_ENABLE_TX_RX (ENABLE) +/* + * Rx configuration (filter) information element + * --------------------------------------------- + */ +#define REG_RX_CONFIG (RX_CFG) +#define REG_RX_FILTER (RX_FILTER_CFG) + + +#define RX_CFG_ENABLE_PHY_HEADER_PLCP 0x0002 + +/* promiscuous - receives all valid frames */ +#define RX_CFG_PROMISCUOUS 0x0008 + +/* receives frames from any BSSID */ +#define RX_CFG_BSSID 0x0020 + +/* receives frames destined to any MAC address */ +#define RX_CFG_MAC 0x0010 + +#define RX_CFG_ENABLE_ONLY_MY_DEST_MAC 0x0010 +#define RX_CFG_ENABLE_ANY_DEST_MAC 0x0000 +#define RX_CFG_ENABLE_ONLY_MY_BSSID 0x0020 +#define RX_CFG_ENABLE_ANY_BSSID 0x0000 + +/* discards all broadcast frames */ +#define RX_CFG_DISABLE_BCAST 0x0200 + +#define RX_CFG_ENABLE_ONLY_MY_SSID 0x0400 +#define RX_CFG_ENABLE_RX_CMPLT_FCS_ERROR 0x0800 +#define RX_CFG_COPY_RX_STATUS 0x2000 +#define RX_CFG_TSF 0x10000 + +#define RX_CONFIG_OPTION_ANY_DST_MY_BSS (RX_CFG_ENABLE_ANY_DEST_MAC | \ + RX_CFG_ENABLE_ONLY_MY_BSSID) + +#define RX_CONFIG_OPTION_MY_DST_ANY_BSS (RX_CFG_ENABLE_ONLY_MY_DEST_MAC\ + | RX_CFG_ENABLE_ANY_BSSID) + +#define RX_CONFIG_OPTION_ANY_DST_ANY_BSS (RX_CFG_ENABLE_ANY_DEST_MAC | \ + RX_CFG_ENABLE_ANY_BSSID) + +#define RX_CONFIG_OPTION_MY_DST_MY_BSS (RX_CFG_ENABLE_ONLY_MY_DEST_MAC\ + | RX_CFG_ENABLE_ONLY_MY_BSSID) + +#define RX_CONFIG_OPTION_FOR_SCAN (RX_CFG_ENABLE_PHY_HEADER_PLCP \ + | RX_CFG_ENABLE_RX_CMPLT_FCS_ERROR \ + | RX_CFG_COPY_RX_STATUS | RX_CFG_TSF) + +#define RX_CONFIG_OPTION_FOR_MEASUREMENT (RX_CFG_ENABLE_ANY_DEST_MAC) + +#define RX_CONFIG_OPTION_FOR_JOIN (RX_CFG_ENABLE_ONLY_MY_BSSID | \ + RX_CFG_ENABLE_ONLY_MY_DEST_MAC) + +#define RX_CONFIG_OPTION_FOR_IBSS_JOIN (RX_CFG_ENABLE_ONLY_MY_SSID | \ + RX_CFG_ENABLE_ONLY_MY_DEST_MAC) + +#define RX_FILTER_OPTION_DEF (CFG_RX_MGMT_EN | CFG_RX_DATA_EN\ + | CFG_RX_CTL_EN | CFG_RX_BCN_EN\ + | CFG_RX_AUTH_EN | CFG_RX_ASSOC_EN) + +#define RX_FILTER_OPTION_FILTER_ALL 0 + +#define RX_FILTER_OPTION_DEF_PRSP_BCN (CFG_RX_PRSP_EN | CFG_RX_MGMT_EN\ + | CFG_RX_RCTS_ACK | CFG_RX_BCN_EN) + +#define RX_FILTER_OPTION_JOIN (CFG_RX_MGMT_EN | CFG_RX_DATA_EN\ + | CFG_RX_BCN_EN | CFG_RX_AUTH_EN\ + | CFG_RX_ASSOC_EN | CFG_RX_RCTS_ACK\ + | CFG_RX_PRSP_EN) + + +/*=============================================== + EEPROM Read/Write Request 32bit RW + ------------------------------------------ + 1 EE_READ - EEPROM Read Request 1 - Setting this bit + loads a single byte of data into the EE_DATA + register from the EEPROM location specified in + the EE_ADDR register. + The Wlan hardware hardware clears this bit automatically. + EE_DATA is valid when this bit is cleared. + + 0 EE_WRITE - EEPROM Write Request - Setting this bit + writes a single byte of data from the EE_DATA register into the + EEPROM location specified in the EE_ADDR register. + The Wlan hardware hardware clears this bit automatically. +*===============================================*/ +#define ACX_EE_CTL_REG EE_CTL +#define EE_WRITE 0x00000001ul +#define EE_READ 0x00000002ul + +/*=============================================== + EEPROM Address - 32bit RW + ------------------------------------------ + This register specifies the address + within the EEPROM from/to which to read/write data. + ===============================================*/ +#define ACX_EE_ADDR_REG EE_ADDR + +/*=============================================== + EEPROM Data - 32bit RW + ------------------------------------------ + This register either holds the read 8 bits of + data from the EEPROM or the write data + to be written to the EEPROM. + ===============================================*/ +#define ACX_EE_DATA_REG EE_DATA + +/*=============================================== + EEPROM Base Address - 32bit RW + ------------------------------------------ + This register holds the upper nine bits + [23:15] of the 24-bit Wlan hardware memory + address for burst reads from EEPROM accesses. + The EEPROM provides the lower 15 bits of this address. + The MSB of the address from the EEPROM is ignored. + ===============================================*/ +#define ACX_EE_CFG EE_CFG + +/*=============================================== + GPIO Output Values -32bit, RW + ------------------------------------------ + [31:16] Reserved + [15: 0] Specify the output values (at the output driver inputs) for + GPIO[15:0], respectively. + ===============================================*/ +#define ACX_GPIO_OUT_REG GPIO_OUT +#define ACX_MAX_GPIO_LINES 15 + +/*=============================================== + Contention window -32bit, RW + ------------------------------------------ + [31:26] Reserved + [25:16] Max (0x3ff) + [15:07] Reserved + [06:00] Current contention window value - default is 0x1F + ===============================================*/ +#define ACX_CONT_WIND_CFG_REG CONT_WIND_CFG +#define ACX_CONT_WIND_MIN_MASK 0x0000007f +#define ACX_CONT_WIND_MAX 0x03ff0000 + +/*=============================================== + HI_CFG Interface Configuration Register Values + ------------------------------------------ + ===============================================*/ +#define HI_CFG_UART_ENABLE 0x00000004 +#define HI_CFG_RST232_ENABLE 0x00000008 +#define HI_CFG_CLOCK_REQ_SELECT 0x00000010 +#define HI_CFG_HOST_INT_ENABLE 0x00000020 +#define HI_CFG_VLYNQ_OUTPUT_ENABLE 0x00000040 +#define HI_CFG_HOST_INT_ACTIVE_LOW 0x00000080 +#define HI_CFG_UART_TX_OUT_GPIO_15 0x00000100 +#define HI_CFG_UART_TX_OUT_GPIO_14 0x00000200 +#define HI_CFG_UART_TX_OUT_GPIO_7 0x00000400 + +/* + * NOTE: USE_ACTIVE_HIGH compilation flag should be defined in makefile + * for platforms using active high interrupt level + */ +#ifdef USE_ACTIVE_HIGH +#define HI_CFG_DEF_VAL \ + (HI_CFG_UART_ENABLE | \ + HI_CFG_RST232_ENABLE | \ + HI_CFG_CLOCK_REQ_SELECT | \ + HI_CFG_HOST_INT_ENABLE) +#else +#define HI_CFG_DEF_VAL \ + (HI_CFG_UART_ENABLE | \ + HI_CFG_RST232_ENABLE | \ + HI_CFG_CLOCK_REQ_SELECT | \ + HI_CFG_HOST_INT_ENABLE) + +#endif + +#define REF_FREQ_19_2 0 +#define REF_FREQ_26_0 1 +#define REF_FREQ_38_4 2 +#define REF_FREQ_40_0 3 +#define REF_FREQ_33_6 4 +#define REF_FREQ_NUM 5 + +#define LUT_PARAM_INTEGER_DIVIDER 0 +#define LUT_PARAM_FRACTIONAL_DIVIDER 1 +#define LUT_PARAM_ATTN_BB 2 +#define LUT_PARAM_ALPHA_BB 3 +#define LUT_PARAM_STOP_TIME_BB 4 +#define LUT_PARAM_BB_PLL_LOOP_FILTER 5 +#define LUT_PARAM_NUM 6 + +#define ACX_EEPROMLESS_IND_REG (SCR_PAD4) +#define USE_EEPROM 0 +#define SOFT_RESET_MAX_TIME 1000000 +#define SOFT_RESET_STALL_TIME 1000 +#define NVS_DATA_BUNDARY_ALIGNMENT 4 + + +/* Firmware image load chunk size */ +#define CHUNK_SIZE 512 + +/* Firmware image header size */ +#define FW_HDR_SIZE 8 + +#define ECPU_CONTROL_HALT 0x00000101 + + +/****************************************************************************** + + CHANNELS, BAND & REG DOMAINS definitions + +******************************************************************************/ + + +enum { + RADIO_BAND_2_4GHZ = 0, /* 2.4 Ghz band */ + RADIO_BAND_5GHZ = 1, /* 5 Ghz band */ + RADIO_BAND_JAPAN_4_9_GHZ = 2, + DEFAULT_BAND = RADIO_BAND_2_4GHZ, + INVALID_BAND = 0xFE, + MAX_RADIO_BANDS = 0xFF +}; + +#define SHORT_PREAMBLE_BIT BIT(0) /* CCK or Barker depending on the rate */ +#define OFDM_RATE_BIT BIT(6) +#define PBCC_RATE_BIT BIT(7) + +enum { + CCK_LONG = 0, + CCK_SHORT = SHORT_PREAMBLE_BIT, + PBCC_LONG = PBCC_RATE_BIT, + PBCC_SHORT = PBCC_RATE_BIT | SHORT_PREAMBLE_BIT, + OFDM = OFDM_RATE_BIT +}; + +/****************************************************************************** + +Transmit-Descriptor RATE-SET field definitions... + +Define a new "Rate-Set" for TX path that incorporates the +Rate & Modulation info into a single 16-bit field. + +TxdRateSet_t: +b15 - Indicates Preamble type (1=SHORT, 0=LONG). + Notes: + Must be LONG (0) for 1Mbps rate. + Does not apply (set to 0) for RevG-OFDM rates. +b14 - Indicates PBCC encoding (1=PBCC, 0=not). + Notes: + Does not apply (set to 0) for rates 1 and 2 Mbps. + Does not apply (set to 0) for RevG-OFDM rates. +b13 - Unused (set to 0). +b12-b0 - Supported Rate indicator bits as defined below. + +******************************************************************************/ + + +/************************************************************************* + + Interrupt Trigger Register (Host -> WiLink) + +**************************************************************************/ + +/* Hardware to Embedded CPU Interrupts - first 32-bit register set */ + +/* + * Host Command Interrupt. Setting this bit masks + * the interrupt that the host issues to inform + * the FW that it has sent a command + * to the Wlan hardware Command Mailbox. + */ +#define INTR_TRIG_CMD BIT(0) + +/* + * Host Event Acknowlegde Interrupt. The host + * sets this bit to acknowledge that it received + * the unsolicited information from the event + * mailbox. + */ +#define INTR_TRIG_EVENT_ACK BIT(1) + +/* + * The host sets this bit to inform the Wlan + * FW that a TX packet is in the XFER + * Buffer #0. + */ +#define INTR_TRIG_TX_PROC0 BIT(2) + +/* + * The host sets this bit to inform the FW + * that it read a packet from RX XFER + * Buffer #0. + */ +#define INTR_TRIG_RX_PROC0 BIT(3) + +#define INTR_TRIG_DEBUG_ACK BIT(4) + +#define INTR_TRIG_STATE_CHANGED BIT(5) + + +/* Hardware to Embedded CPU Interrupts - second 32-bit register set */ + +/* + * The host sets this bit to inform the FW + * that it read a packet from RX XFER + * Buffer #1. + */ +#define INTR_TRIG_RX_PROC1 BIT(17) + +/* + * The host sets this bit to inform the Wlan + * hardware that a TX packet is in the XFER + * Buffer #1. + */ +#define INTR_TRIG_TX_PROC1 BIT(18) + +#endif diff --git a/drivers/net/wireless/wl12xx/rx.c b/drivers/net/wireless/wl12xx/rx.c new file mode 100644 index 00000000000..682304c30b8 --- /dev/null +++ b/drivers/net/wireless/wl12xx/rx.c @@ -0,0 +1,203 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 2009 Nokia Corporation + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include + +#include "wl12xx.h" +#include "acx.h" +#include "reg.h" +#include "rx.h" +#include "io.h" + +static u8 wl1271_rx_get_mem_block(struct wl1271_fw_status *status, + u32 drv_rx_counter) +{ + return le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]) & + RX_MEM_BLOCK_MASK; +} + +static u32 wl1271_rx_get_buf_size(struct wl1271_fw_status *status, + u32 drv_rx_counter) +{ + return (le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]) & + RX_BUF_SIZE_MASK) >> RX_BUF_SIZE_SHIFT_DIV; +} + +static void wl1271_rx_status(struct wl1271 *wl, + struct wl1271_rx_descriptor *desc, + struct ieee80211_rx_status *status, + u8 beacon) +{ + enum ieee80211_band desc_band; + + memset(status, 0, sizeof(struct ieee80211_rx_status)); + + status->band = wl->band; + + if ((desc->flags & WL1271_RX_DESC_BAND_MASK) == WL1271_RX_DESC_BAND_BG) + desc_band = IEEE80211_BAND_2GHZ; + else + desc_band = IEEE80211_BAND_5GHZ; + + status->rate_idx = wl1271_rate_to_idx(desc->rate, desc_band); + +#ifdef CONFIG_WL12XX_HT + /* 11n support */ + if (desc->rate <= CONF_HW_RXTX_RATE_MCS0) + status->flag |= RX_FLAG_HT; +#endif + + status->signal = desc->rssi; + + /* + * FIXME: In wl1251, the SNR should be divided by two. In wl1271 we + * need to divide by two for now, but TI has been discussing about + * changing it. This needs to be rechecked. + */ + wl->noise = desc->rssi - (desc->snr >> 1); + + status->freq = ieee80211_channel_to_frequency(desc->channel); + + if (desc->flags & WL1271_RX_DESC_ENCRYPT_MASK) { + status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED; + + if (likely(!(desc->status & WL1271_RX_DESC_DECRYPT_FAIL))) + status->flag |= RX_FLAG_DECRYPTED; + if (unlikely(desc->status & WL1271_RX_DESC_MIC_FAIL)) + status->flag |= RX_FLAG_MMIC_ERROR; + } +} + +static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length) +{ + struct wl1271_rx_descriptor *desc; + struct sk_buff *skb; + u16 *fc; + u8 *buf; + u8 beacon = 0; + + /* + * In PLT mode we seem to get frames and mac80211 warns about them, + * workaround this by not retrieving them at all. + */ + if (unlikely(wl->state == WL1271_STATE_PLT)) + return -EINVAL; + + skb = __dev_alloc_skb(length, GFP_KERNEL); + if (!skb) { + wl1271_error("Couldn't allocate RX frame"); + return -ENOMEM; + } + + buf = skb_put(skb, length); + memcpy(buf, data, length); + + /* the data read starts with the descriptor */ + desc = (struct wl1271_rx_descriptor *) buf; + + /* now we pull the descriptor out of the buffer */ + skb_pull(skb, sizeof(*desc)); + + fc = (u16 *)skb->data; + if ((*fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_BEACON) + beacon = 1; + + wl1271_rx_status(wl, desc, IEEE80211_SKB_RXCB(skb), beacon); + + wl1271_debug(DEBUG_RX, "rx skb 0x%p: %d B %s", skb, skb->len, + beacon ? "beacon" : ""); + + skb_trim(skb, skb->len - desc->pad_len); + + ieee80211_rx_ni(wl->hw, skb); + + return 0; +} + +void wl1271_rx(struct wl1271 *wl, struct wl1271_fw_status *status) +{ + struct wl1271_acx_mem_map *wl_mem_map = wl->target_mem_map; + u32 buf_size; + u32 fw_rx_counter = status->fw_rx_counter & NUM_RX_PKT_DESC_MOD_MASK; + u32 drv_rx_counter = wl->rx_counter & NUM_RX_PKT_DESC_MOD_MASK; + u32 rx_counter; + u32 mem_block; + u32 pkt_length; + u32 pkt_offset; + + while (drv_rx_counter != fw_rx_counter) { + buf_size = 0; + rx_counter = drv_rx_counter; + while (rx_counter != fw_rx_counter) { + pkt_length = wl1271_rx_get_buf_size(status, rx_counter); + if (buf_size + pkt_length > WL1271_AGGR_BUFFER_SIZE) + break; + buf_size += pkt_length; + rx_counter++; + rx_counter &= NUM_RX_PKT_DESC_MOD_MASK; + } + + if (buf_size == 0) { + wl1271_warning("received empty data"); + break; + } + + /* + * Choose the block we want to read + * For aggregated packets, only the first memory block should + * be retrieved. The FW takes care of the rest. + */ + mem_block = wl1271_rx_get_mem_block(status, drv_rx_counter); + wl->rx_mem_pool_addr.addr = (mem_block << 8) + + le32_to_cpu(wl_mem_map->packet_memory_pool_start); + wl->rx_mem_pool_addr.addr_extra = + wl->rx_mem_pool_addr.addr + 4; + wl1271_write(wl, WL1271_SLV_REG_DATA, &wl->rx_mem_pool_addr, + sizeof(wl->rx_mem_pool_addr), false); + + /* Read all available packets at once */ + wl1271_read(wl, WL1271_SLV_MEM_DATA, wl->aggr_buf, + buf_size, true); + + /* Split data into separate packets */ + pkt_offset = 0; + while (pkt_offset < buf_size) { + pkt_length = wl1271_rx_get_buf_size(status, + drv_rx_counter); + /* + * the handle data call can only fail in memory-outage + * conditions, in that case the received frame will just + * be dropped. + */ + wl1271_rx_handle_data(wl, + wl->aggr_buf + pkt_offset, + pkt_length); + wl->rx_counter++; + drv_rx_counter++; + drv_rx_counter &= NUM_RX_PKT_DESC_MOD_MASK; + pkt_offset += pkt_length; + } + } + wl1271_write32(wl, RX_DRIVER_COUNTER_ADDRESS, + cpu_to_le32(wl->rx_counter)); +} diff --git a/drivers/net/wireless/wl12xx/rx.h b/drivers/net/wireless/wl12xx/rx.h new file mode 100644 index 00000000000..3abb26fe036 --- /dev/null +++ b/drivers/net/wireless/wl12xx/rx.h @@ -0,0 +1,121 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 1998-2009 Texas Instruments. All rights reserved. + * Copyright (C) 2008-2009 Nokia Corporation + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __RX_H__ +#define __RX_H__ + +#include + +#define WL1271_RX_MAX_RSSI -30 +#define WL1271_RX_MIN_RSSI -95 + +#define WL1271_RX_ALIGN_TO 4 +#define WL1271_RX_ALIGN(len) (((len) + WL1271_RX_ALIGN_TO - 1) & \ + ~(WL1271_RX_ALIGN_TO - 1)) + +#define SHORT_PREAMBLE_BIT BIT(0) +#define OFDM_RATE_BIT BIT(6) +#define PBCC_RATE_BIT BIT(7) + +#define PLCP_HEADER_LENGTH 8 +#define RX_DESC_PACKETID_SHIFT 11 +#define RX_MAX_PACKET_ID 3 + +#define NUM_RX_PKT_DESC_MOD_MASK 7 + +#define RX_DESC_VALID_FCS 0x0001 +#define RX_DESC_MATCH_RXADDR1 0x0002 +#define RX_DESC_MCAST 0x0004 +#define RX_DESC_STAINTIM 0x0008 +#define RX_DESC_VIRTUAL_BM 0x0010 +#define RX_DESC_BCAST 0x0020 +#define RX_DESC_MATCH_SSID 0x0040 +#define RX_DESC_MATCH_BSSID 0x0080 +#define RX_DESC_ENCRYPTION_MASK 0x0300 +#define RX_DESC_MEASURMENT 0x0400 +#define RX_DESC_SEQNUM_MASK 0x1800 +#define RX_DESC_MIC_FAIL 0x2000 +#define RX_DESC_DECRYPT_FAIL 0x4000 + +/* + * RX Descriptor flags: + * + * Bits 0-1 - band + * Bit 2 - STBC + * Bit 3 - A-MPDU + * Bit 4 - HT + * Bits 5-7 - encryption + */ +#define WL1271_RX_DESC_BAND_MASK 0x03 +#define WL1271_RX_DESC_ENCRYPT_MASK 0xE0 + +#define WL1271_RX_DESC_BAND_BG 0x00 +#define WL1271_RX_DESC_BAND_J 0x01 +#define WL1271_RX_DESC_BAND_A 0x02 + +#define WL1271_RX_DESC_STBC BIT(2) +#define WL1271_RX_DESC_A_MPDU BIT(3) +#define WL1271_RX_DESC_HT BIT(4) + +#define WL1271_RX_DESC_ENCRYPT_WEP 0x20 +#define WL1271_RX_DESC_ENCRYPT_TKIP 0x40 +#define WL1271_RX_DESC_ENCRYPT_AES 0x60 +#define WL1271_RX_DESC_ENCRYPT_GEM 0x80 + +/* + * RX Descriptor status + * + * Bits 0-2 - status + * Bits 3-7 - reserved + */ +#define WL1271_RX_DESC_STATUS_MASK 0x07 + +#define WL1271_RX_DESC_SUCCESS 0x00 +#define WL1271_RX_DESC_DECRYPT_FAIL 0x01 +#define WL1271_RX_DESC_MIC_FAIL 0x02 +#define WL1271_RX_DESC_DRIVER_RX_Q_FAIL 0x03 + +#define RX_MEM_BLOCK_MASK 0xFF +#define RX_BUF_SIZE_MASK 0xFFF00 +#define RX_BUF_SIZE_SHIFT_DIV 6 + +struct wl1271_rx_descriptor { + __le16 length; + u8 status; + u8 flags; + u8 rate; + u8 channel; + s8 rssi; + u8 snr; + __le32 timestamp; + u8 packet_class; + u8 process_id; + u8 pad_len; + u8 reserved; +} __packed; + +void wl1271_rx(struct wl1271 *wl, struct wl1271_fw_status *status); +u8 wl1271_rate_to_idx(int rate, enum ieee80211_band band); + +#endif diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c new file mode 100644 index 00000000000..f3f2c5b011e --- /dev/null +++ b/drivers/net/wireless/wl12xx/scan.c @@ -0,0 +1,307 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 2009-2010 Nokia Corporation + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include + +#include "wl12xx.h" +#include "cmd.h" +#include "scan.h" +#include "acx.h" + +void wl1271_scan_complete_work(struct work_struct *work) +{ + struct delayed_work *dwork; + struct wl1271 *wl; + + dwork = container_of(work, struct delayed_work, work); + wl = container_of(dwork, struct wl1271, scan_complete_work); + + wl1271_debug(DEBUG_SCAN, "Scanning complete"); + + mutex_lock(&wl->mutex); + + if (wl->scan.state == WL1271_SCAN_STATE_IDLE) { + mutex_unlock(&wl->mutex); + return; + } + + wl->scan.state = WL1271_SCAN_STATE_IDLE; + kfree(wl->scan.scanned_ch); + wl->scan.scanned_ch = NULL; + wl->scan.req = NULL; + ieee80211_scan_completed(wl->hw, false); + + if (wl->scan.failed) { + wl1271_info("Scan completed due to error."); + ieee80211_queue_work(wl->hw, &wl->recovery_work); + } + mutex_unlock(&wl->mutex); + +} + + +static int wl1271_get_scan_channels(struct wl1271 *wl, + struct cfg80211_scan_request *req, + struct basic_scan_channel_params *channels, + enum ieee80211_band band, bool passive) +{ + struct conf_scan_settings *c = &wl->conf.scan; + int i, j; + u32 flags; + + for (i = 0, j = 0; + i < req->n_channels && j < WL1271_SCAN_MAX_CHANNELS; + i++) { + + flags = req->channels[i]->flags; + + if (!wl->scan.scanned_ch[i] && + !(flags & IEEE80211_CHAN_DISABLED) && + ((!!(flags & IEEE80211_CHAN_PASSIVE_SCAN)) == passive) && + (req->channels[i]->band == band)) { + + wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ", + req->channels[i]->band, + req->channels[i]->center_freq); + wl1271_debug(DEBUG_SCAN, "hw_value %d, flags %X", + req->channels[i]->hw_value, + req->channels[i]->flags); + wl1271_debug(DEBUG_SCAN, + "max_antenna_gain %d, max_power %d", + req->channels[i]->max_antenna_gain, + req->channels[i]->max_power); + wl1271_debug(DEBUG_SCAN, "beacon_found %d", + req->channels[i]->beacon_found); + + if (!passive) { + channels[j].min_duration = + cpu_to_le32(c->min_dwell_time_active); + channels[j].max_duration = + cpu_to_le32(c->max_dwell_time_active); + } else { + channels[j].min_duration = + cpu_to_le32(c->min_dwell_time_passive); + channels[j].max_duration = + cpu_to_le32(c->max_dwell_time_passive); + } + channels[j].early_termination = 0; + channels[j].tx_power_att = req->channels[i]->max_power; + channels[j].channel = req->channels[i]->hw_value; + + memset(&channels[j].bssid_lsb, 0xff, 4); + memset(&channels[j].bssid_msb, 0xff, 2); + + /* Mark the channels we already used */ + wl->scan.scanned_ch[i] = true; + + j++; + } + } + + return j; +} + +#define WL1271_NOTHING_TO_SCAN 1 + +static int wl1271_scan_send(struct wl1271 *wl, enum ieee80211_band band, + bool passive, u32 basic_rate) +{ + struct wl1271_cmd_scan *cmd; + struct wl1271_cmd_trigger_scan_to *trigger; + int ret; + u16 scan_options = 0; + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + trigger = kzalloc(sizeof(*trigger), GFP_KERNEL); + if (!cmd || !trigger) { + ret = -ENOMEM; + goto out; + } + + /* We always use high priority scans */ + scan_options = WL1271_SCAN_OPT_PRIORITY_HIGH; + + /* No SSIDs means that we have a forced passive scan */ + if (passive || wl->scan.req->n_ssids == 0) + scan_options |= WL1271_SCAN_OPT_PASSIVE; + + cmd->params.scan_options = cpu_to_le16(scan_options); + + cmd->params.n_ch = wl1271_get_scan_channels(wl, wl->scan.req, + cmd->channels, + band, passive); + if (cmd->params.n_ch == 0) { + ret = WL1271_NOTHING_TO_SCAN; + goto out; + } + + cmd->params.tx_rate = cpu_to_le32(basic_rate); + cmd->params.rx_config_options = cpu_to_le32(CFG_RX_ALL_GOOD); + cmd->params.rx_filter_options = + cpu_to_le32(CFG_RX_PRSP_EN | CFG_RX_MGMT_EN | CFG_RX_BCN_EN); + + cmd->params.n_probe_reqs = wl->conf.scan.num_probe_reqs; + cmd->params.tx_rate = cpu_to_le32(basic_rate); + cmd->params.tid_trigger = 0; + cmd->params.scan_tag = WL1271_SCAN_DEFAULT_TAG; + + if (band == IEEE80211_BAND_2GHZ) + cmd->params.band = WL1271_SCAN_BAND_2_4_GHZ; + else + cmd->params.band = WL1271_SCAN_BAND_5_GHZ; + + if (wl->scan.ssid_len && wl->scan.ssid) { + cmd->params.ssid_len = wl->scan.ssid_len; + memcpy(cmd->params.ssid, wl->scan.ssid, wl->scan.ssid_len); + } + + ret = wl1271_cmd_build_probe_req(wl, wl->scan.ssid, wl->scan.ssid_len, + wl->scan.req->ie, wl->scan.req->ie_len, + band); + if (ret < 0) { + wl1271_error("PROBE request template failed"); + goto out; + } + + /* disable the timeout */ + trigger->timeout = 0; + ret = wl1271_cmd_send(wl, CMD_TRIGGER_SCAN_TO, trigger, + sizeof(*trigger), 0); + if (ret < 0) { + wl1271_error("trigger scan to failed for hw scan"); + goto out; + } + + wl1271_dump(DEBUG_SCAN, "SCAN: ", cmd, sizeof(*cmd)); + + ret = wl1271_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd), 0); + if (ret < 0) { + wl1271_error("SCAN failed"); + goto out; + } + +out: + kfree(cmd); + kfree(trigger); + return ret; +} + +void wl1271_scan_stm(struct wl1271 *wl) +{ + int ret = 0; + + switch (wl->scan.state) { + case WL1271_SCAN_STATE_IDLE: + break; + + case WL1271_SCAN_STATE_2GHZ_ACTIVE: + ret = wl1271_scan_send(wl, IEEE80211_BAND_2GHZ, false, + wl->conf.tx.basic_rate); + if (ret == WL1271_NOTHING_TO_SCAN) { + wl->scan.state = WL1271_SCAN_STATE_2GHZ_PASSIVE; + wl1271_scan_stm(wl); + } + + break; + + case WL1271_SCAN_STATE_2GHZ_PASSIVE: + ret = wl1271_scan_send(wl, IEEE80211_BAND_2GHZ, true, + wl->conf.tx.basic_rate); + if (ret == WL1271_NOTHING_TO_SCAN) { + if (wl->enable_11a) + wl->scan.state = WL1271_SCAN_STATE_5GHZ_ACTIVE; + else + wl->scan.state = WL1271_SCAN_STATE_DONE; + wl1271_scan_stm(wl); + } + + break; + + case WL1271_SCAN_STATE_5GHZ_ACTIVE: + ret = wl1271_scan_send(wl, IEEE80211_BAND_5GHZ, false, + wl->conf.tx.basic_rate_5); + if (ret == WL1271_NOTHING_TO_SCAN) { + wl->scan.state = WL1271_SCAN_STATE_5GHZ_PASSIVE; + wl1271_scan_stm(wl); + } + + break; + + case WL1271_SCAN_STATE_5GHZ_PASSIVE: + ret = wl1271_scan_send(wl, IEEE80211_BAND_5GHZ, true, + wl->conf.tx.basic_rate_5); + if (ret == WL1271_NOTHING_TO_SCAN) { + wl->scan.state = WL1271_SCAN_STATE_DONE; + wl1271_scan_stm(wl); + } + + break; + + case WL1271_SCAN_STATE_DONE: + wl->scan.failed = false; + cancel_delayed_work(&wl->scan_complete_work); + ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work, + msecs_to_jiffies(0)); + break; + + default: + wl1271_error("invalid scan state"); + break; + } + + if (ret < 0) { + cancel_delayed_work(&wl->scan_complete_work); + ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work, + msecs_to_jiffies(0)); + } +} + +int wl1271_scan(struct wl1271 *wl, const u8 *ssid, size_t ssid_len, + struct cfg80211_scan_request *req) +{ + if (wl->scan.state != WL1271_SCAN_STATE_IDLE) + return -EBUSY; + + wl->scan.state = WL1271_SCAN_STATE_2GHZ_ACTIVE; + + if (ssid_len && ssid) { + wl->scan.ssid_len = ssid_len; + memcpy(wl->scan.ssid, ssid, ssid_len); + } else { + wl->scan.ssid_len = 0; + } + + wl->scan.req = req; + + wl->scan.scanned_ch = kcalloc(req->n_channels, + sizeof(*wl->scan.scanned_ch), + GFP_KERNEL); + /* we assume failure so that timeout scenarios are handled correctly */ + wl->scan.failed = true; + ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work, + msecs_to_jiffies(WL1271_SCAN_TIMEOUT)); + + wl1271_scan_stm(wl); + + return 0; +} diff --git a/drivers/net/wireless/wl12xx/scan.h b/drivers/net/wireless/wl12xx/scan.h new file mode 100644 index 00000000000..421a750add5 --- /dev/null +++ b/drivers/net/wireless/wl12xx/scan.h @@ -0,0 +1,109 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 2009-2010 Nokia Corporation + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __SCAN_H__ +#define __SCAN_H__ + +#include "wl12xx.h" + +int wl1271_scan(struct wl1271 *wl, const u8 *ssid, size_t ssid_len, + struct cfg80211_scan_request *req); +int wl1271_scan_build_probe_req(struct wl1271 *wl, + const u8 *ssid, size_t ssid_len, + const u8 *ie, size_t ie_len, u8 band); +void wl1271_scan_stm(struct wl1271 *wl); +void wl1271_scan_complete_work(struct work_struct *work); + +#define WL1271_SCAN_MAX_CHANNELS 24 +#define WL1271_SCAN_DEFAULT_TAG 1 +#define WL1271_SCAN_CURRENT_TX_PWR 0 +#define WL1271_SCAN_OPT_ACTIVE 0 +#define WL1271_SCAN_OPT_PASSIVE 1 +#define WL1271_SCAN_OPT_PRIORITY_HIGH 4 +#define WL1271_SCAN_BAND_2_4_GHZ 0 +#define WL1271_SCAN_BAND_5_GHZ 1 + +#define WL1271_SCAN_TIMEOUT 10000 /* msec */ + +enum { + WL1271_SCAN_STATE_IDLE, + WL1271_SCAN_STATE_2GHZ_ACTIVE, + WL1271_SCAN_STATE_2GHZ_PASSIVE, + WL1271_SCAN_STATE_5GHZ_ACTIVE, + WL1271_SCAN_STATE_5GHZ_PASSIVE, + WL1271_SCAN_STATE_DONE +}; + +struct basic_scan_params { + __le32 rx_config_options; + __le32 rx_filter_options; + /* Scan option flags (WL1271_SCAN_OPT_*) */ + __le16 scan_options; + /* Number of scan channels in the list (maximum 30) */ + u8 n_ch; + /* This field indicates the number of probe requests to send + per channel for an active scan */ + u8 n_probe_reqs; + /* Rate bit field for sending the probes */ + __le32 tx_rate; + u8 tid_trigger; + u8 ssid_len; + /* in order to align */ + u8 padding1[2]; + u8 ssid[IW_ESSID_MAX_SIZE]; + /* Band to scan */ + u8 band; + u8 use_ssid_list; + u8 scan_tag; + u8 padding2; +} __packed; + +struct basic_scan_channel_params { + /* Duration in TU to wait for frames on a channel for active scan */ + __le32 min_duration; + __le32 max_duration; + __le32 bssid_lsb; + __le16 bssid_msb; + u8 early_termination; + u8 tx_power_att; + u8 channel; + /* FW internal use only! */ + u8 dfs_candidate; + u8 activity_detected; + u8 pad; +} __packed; + +struct wl1271_cmd_scan { + struct wl1271_cmd_header header; + + struct basic_scan_params params; + struct basic_scan_channel_params channels[WL1271_SCAN_MAX_CHANNELS]; +} __packed; + +struct wl1271_cmd_trigger_scan_to { + struct wl1271_cmd_header header; + + __le32 timeout; +} __packed; + +#endif /* __WL1271_SCAN_H__ */ diff --git a/drivers/net/wireless/wl12xx/sdio.c b/drivers/net/wireless/wl12xx/sdio.c new file mode 100644 index 00000000000..93cbb8d5aba --- /dev/null +++ b/drivers/net/wireless/wl12xx/sdio.c @@ -0,0 +1,347 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 2009-2010 Nokia Corporation + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "wl12xx.h" +#include "wl12xx_80211.h" +#include "io.h" + +#ifndef SDIO_VENDOR_ID_TI +#define SDIO_VENDOR_ID_TI 0x0097 +#endif + +#ifndef SDIO_DEVICE_ID_TI_WL1271 +#define SDIO_DEVICE_ID_TI_WL1271 0x4076 +#endif + +static const struct sdio_device_id wl1271_devices[] = { + { SDIO_DEVICE(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_WL1271) }, + {} +}; +MODULE_DEVICE_TABLE(sdio, wl1271_devices); + +static inline struct sdio_func *wl_to_func(struct wl1271 *wl) +{ + return wl->if_priv; +} + +static struct device *wl1271_sdio_wl_to_dev(struct wl1271 *wl) +{ + return &(wl_to_func(wl)->dev); +} + +static irqreturn_t wl1271_irq(int irq, void *cookie) +{ + struct wl1271 *wl = cookie; + unsigned long flags; + + wl1271_debug(DEBUG_IRQ, "IRQ"); + + /* complete the ELP completion */ + spin_lock_irqsave(&wl->wl_lock, flags); + if (wl->elp_compl) { + complete(wl->elp_compl); + wl->elp_compl = NULL; + } + + if (!test_and_set_bit(WL1271_FLAG_IRQ_RUNNING, &wl->flags)) + ieee80211_queue_work(wl->hw, &wl->irq_work); + set_bit(WL1271_FLAG_IRQ_PENDING, &wl->flags); + spin_unlock_irqrestore(&wl->wl_lock, flags); + + return IRQ_HANDLED; +} + +static void wl1271_sdio_disable_interrupts(struct wl1271 *wl) +{ + disable_irq(wl->irq); +} + +static void wl1271_sdio_enable_interrupts(struct wl1271 *wl) +{ + enable_irq(wl->irq); +} + +static void wl1271_sdio_reset(struct wl1271 *wl) +{ +} + +static void wl1271_sdio_init(struct wl1271 *wl) +{ +} + +static void wl1271_sdio_raw_read(struct wl1271 *wl, int addr, void *buf, + size_t len, bool fixed) +{ + int ret; + struct sdio_func *func = wl_to_func(wl); + + sdio_claim_host(func); + + if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG_ADDR)) { + ((u8 *)buf)[0] = sdio_f0_readb(func, addr, &ret); + wl1271_debug(DEBUG_SDIO, "sdio read 52 addr 0x%x, byte 0x%02x", + addr, ((u8 *)buf)[0]); + } else { + if (fixed) + ret = sdio_readsb(func, buf, addr, len); + else + ret = sdio_memcpy_fromio(func, buf, addr, len); + + wl1271_debug(DEBUG_SDIO, "sdio read 53 addr 0x%x, %zu bytes", + addr, len); + wl1271_dump_ascii(DEBUG_SDIO, "data: ", buf, len); + } + + sdio_release_host(func); + + if (ret) + wl1271_error("sdio read failed (%d)", ret); +} + +static void wl1271_sdio_raw_write(struct wl1271 *wl, int addr, void *buf, + size_t len, bool fixed) +{ + int ret; + struct sdio_func *func = wl_to_func(wl); + + sdio_claim_host(func); + + if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG_ADDR)) { + sdio_f0_writeb(func, ((u8 *)buf)[0], addr, &ret); + wl1271_debug(DEBUG_SDIO, "sdio write 52 addr 0x%x, byte 0x%02x", + addr, ((u8 *)buf)[0]); + } else { + wl1271_debug(DEBUG_SDIO, "sdio write 53 addr 0x%x, %zu bytes", + addr, len); + wl1271_dump_ascii(DEBUG_SDIO, "data: ", buf, len); + + if (fixed) + ret = sdio_writesb(func, addr, buf, len); + else + ret = sdio_memcpy_toio(func, addr, buf, len); + } + + sdio_release_host(func); + + if (ret) + wl1271_error("sdio write failed (%d)", ret); +} + +static int wl1271_sdio_power_on(struct wl1271 *wl) +{ + struct sdio_func *func = wl_to_func(wl); + int ret; + + /* Power up the card */ + ret = pm_runtime_get_sync(&func->dev); + if (ret < 0) + goto out; + + sdio_claim_host(func); + sdio_enable_func(func); + sdio_release_host(func); + +out: + return ret; +} + +static int wl1271_sdio_power_off(struct wl1271 *wl) +{ + struct sdio_func *func = wl_to_func(wl); + + sdio_claim_host(func); + sdio_disable_func(func); + sdio_release_host(func); + + /* Power down the card */ + return pm_runtime_put_sync(&func->dev); +} + +static int wl1271_sdio_set_power(struct wl1271 *wl, bool enable) +{ + if (enable) + return wl1271_sdio_power_on(wl); + else + return wl1271_sdio_power_off(wl); +} + +static struct wl1271_if_operations sdio_ops = { + .read = wl1271_sdio_raw_read, + .write = wl1271_sdio_raw_write, + .reset = wl1271_sdio_reset, + .init = wl1271_sdio_init, + .power = wl1271_sdio_set_power, + .dev = wl1271_sdio_wl_to_dev, + .enable_irq = wl1271_sdio_enable_interrupts, + .disable_irq = wl1271_sdio_disable_interrupts +}; + +static int __devinit wl1271_probe(struct sdio_func *func, + const struct sdio_device_id *id) +{ + struct ieee80211_hw *hw; + const struct wl12xx_platform_data *wlan_data; + struct wl1271 *wl; + int ret; + + /* We are only able to handle the wlan function */ + if (func->num != 0x02) + return -ENODEV; + + hw = wl1271_alloc_hw(); + if (IS_ERR(hw)) + return PTR_ERR(hw); + + wl = hw->priv; + + wl->if_priv = func; + wl->if_ops = &sdio_ops; + + /* Grab access to FN0 for ELP reg. */ + func->card->quirks |= MMC_QUIRK_LENIENT_FN0; + + wlan_data = wl12xx_get_platform_data(); + if (IS_ERR(wlan_data)) { + ret = PTR_ERR(wlan_data); + wl1271_error("missing wlan platform data: %d", ret); + goto out_free; + } + + wl->irq = wlan_data->irq; + wl->ref_clock = wlan_data->board_ref_clock; + + ret = request_irq(wl->irq, wl1271_irq, 0, DRIVER_NAME, wl); + if (ret < 0) { + wl1271_error("request_irq() failed: %d", ret); + goto out_free; + } + + set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING); + + disable_irq(wl->irq); + + ret = wl1271_init_ieee80211(wl); + if (ret) + goto out_irq; + + ret = wl1271_register_hw(wl); + if (ret) + goto out_irq; + + sdio_set_drvdata(func, wl); + + /* Tell PM core that we don't need the card to be powered now */ + pm_runtime_put_noidle(&func->dev); + + wl1271_notice("initialized"); + + return 0; + + out_irq: + free_irq(wl->irq, wl); + + + out_free: + wl1271_free_hw(wl); + + return ret; +} + +static void __devexit wl1271_remove(struct sdio_func *func) +{ + struct wl1271 *wl = sdio_get_drvdata(func); + + /* Undo decrement done above in wl1271_probe */ + pm_runtime_get_noresume(&func->dev); + + wl1271_unregister_hw(wl); + free_irq(wl->irq, wl); + wl1271_free_hw(wl); +} + +static int wl1271_suspend(struct device *dev) +{ + /* Tell MMC/SDIO core it's OK to power down the card + * (if it isn't already), but not to remove it completely */ + return 0; +} + +static int wl1271_resume(struct device *dev) +{ + return 0; +} + +static const struct dev_pm_ops wl1271_sdio_pm_ops = { + .suspend = wl1271_suspend, + .resume = wl1271_resume, +}; + +static struct sdio_driver wl1271_sdio_driver = { + .name = "wl1271_sdio", + .id_table = wl1271_devices, + .probe = wl1271_probe, + .remove = __devexit_p(wl1271_remove), + .drv = { + .pm = &wl1271_sdio_pm_ops, + }, +}; + +static int __init wl1271_init(void) +{ + int ret; + + ret = sdio_register_driver(&wl1271_sdio_driver); + if (ret < 0) { + wl1271_error("failed to register sdio driver: %d", ret); + goto out; + } + +out: + return ret; +} + +static void __exit wl1271_exit(void) +{ + sdio_unregister_driver(&wl1271_sdio_driver); + + wl1271_notice("unloaded"); +} + +module_init(wl1271_init); +module_exit(wl1271_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Luciano Coelho "); +MODULE_AUTHOR("Juuso Oikarinen "); +MODULE_FIRMWARE(WL1271_FW_NAME); diff --git a/drivers/net/wireless/wl12xx/spi.c b/drivers/net/wireless/wl12xx/spi.c new file mode 100644 index 00000000000..46714910f98 --- /dev/null +++ b/drivers/net/wireless/wl12xx/spi.c @@ -0,0 +1,498 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include +#include +#include +#include +#include + +#include "wl12xx.h" +#include "wl12xx_80211.h" +#include "io.h" + +#include "reg.h" + +#define WSPI_CMD_READ 0x40000000 +#define WSPI_CMD_WRITE 0x00000000 +#define WSPI_CMD_FIXED 0x20000000 +#define WSPI_CMD_BYTE_LENGTH 0x1FFE0000 +#define WSPI_CMD_BYTE_LENGTH_OFFSET 17 +#define WSPI_CMD_BYTE_ADDR 0x0001FFFF + +#define WSPI_INIT_CMD_CRC_LEN 5 + +#define WSPI_INIT_CMD_START 0x00 +#define WSPI_INIT_CMD_TX 0x40 +/* the extra bypass bit is sampled by the TNET as '1' */ +#define WSPI_INIT_CMD_BYPASS_BIT 0x80 +#define WSPI_INIT_CMD_FIXEDBUSY_LEN 0x07 +#define WSPI_INIT_CMD_EN_FIXEDBUSY 0x80 +#define WSPI_INIT_CMD_DIS_FIXEDBUSY 0x00 +#define WSPI_INIT_CMD_IOD 0x40 +#define WSPI_INIT_CMD_IP 0x20 +#define WSPI_INIT_CMD_CS 0x10 +#define WSPI_INIT_CMD_WS 0x08 +#define WSPI_INIT_CMD_WSPI 0x01 +#define WSPI_INIT_CMD_END 0x01 + +#define WSPI_INIT_CMD_LEN 8 + +#define HW_ACCESS_WSPI_FIXED_BUSY_LEN \ + ((WL1271_BUSY_WORD_LEN - 4) / sizeof(u32)) +#define HW_ACCESS_WSPI_INIT_CMD_MASK 0 + +/* HW limitation: maximum possible chunk size is 4095 bytes */ +#define WSPI_MAX_CHUNK_SIZE 4092 + +#define WSPI_MAX_NUM_OF_CHUNKS (WL1271_AGGR_BUFFER_SIZE / WSPI_MAX_CHUNK_SIZE) + +static inline struct spi_device *wl_to_spi(struct wl1271 *wl) +{ + return wl->if_priv; +} + +static struct device *wl1271_spi_wl_to_dev(struct wl1271 *wl) +{ + return &(wl_to_spi(wl)->dev); +} + +static void wl1271_spi_disable_interrupts(struct wl1271 *wl) +{ + disable_irq(wl->irq); +} + +static void wl1271_spi_enable_interrupts(struct wl1271 *wl) +{ + enable_irq(wl->irq); +} + +static void wl1271_spi_reset(struct wl1271 *wl) +{ + u8 *cmd; + struct spi_transfer t; + struct spi_message m; + + cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL); + if (!cmd) { + wl1271_error("could not allocate cmd for spi reset"); + return; + } + + memset(&t, 0, sizeof(t)); + spi_message_init(&m); + + memset(cmd, 0xff, WSPI_INIT_CMD_LEN); + + t.tx_buf = cmd; + t.len = WSPI_INIT_CMD_LEN; + spi_message_add_tail(&t, &m); + + spi_sync(wl_to_spi(wl), &m); + kfree(cmd); + + wl1271_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN); +} + +static void wl1271_spi_init(struct wl1271 *wl) +{ + u8 crc[WSPI_INIT_CMD_CRC_LEN], *cmd; + struct spi_transfer t; + struct spi_message m; + + cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL); + if (!cmd) { + wl1271_error("could not allocate cmd for spi init"); + return; + } + + memset(crc, 0, sizeof(crc)); + memset(&t, 0, sizeof(t)); + spi_message_init(&m); + + /* + * Set WSPI_INIT_COMMAND + * the data is being send from the MSB to LSB + */ + cmd[2] = 0xff; + cmd[3] = 0xff; + cmd[1] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX; + cmd[0] = 0; + cmd[7] = 0; + cmd[6] |= HW_ACCESS_WSPI_INIT_CMD_MASK << 3; + cmd[6] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN; + + if (HW_ACCESS_WSPI_FIXED_BUSY_LEN == 0) + cmd[5] |= WSPI_INIT_CMD_DIS_FIXEDBUSY; + else + cmd[5] |= WSPI_INIT_CMD_EN_FIXEDBUSY; + + cmd[5] |= WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS + | WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS; + + crc[0] = cmd[1]; + crc[1] = cmd[0]; + crc[2] = cmd[7]; + crc[3] = cmd[6]; + crc[4] = cmd[5]; + + cmd[4] |= crc7(0, crc, WSPI_INIT_CMD_CRC_LEN) << 1; + cmd[4] |= WSPI_INIT_CMD_END; + + t.tx_buf = cmd; + t.len = WSPI_INIT_CMD_LEN; + spi_message_add_tail(&t, &m); + + spi_sync(wl_to_spi(wl), &m); + wl1271_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN); + kfree(cmd); +} + +#define WL1271_BUSY_WORD_TIMEOUT 1000 + +static int wl1271_spi_read_busy(struct wl1271 *wl) +{ + struct spi_transfer t[1]; + struct spi_message m; + u32 *busy_buf; + int num_busy_bytes = 0; + + /* + * Read further busy words from SPI until a non-busy word is + * encountered, then read the data itself into the buffer. + */ + + num_busy_bytes = WL1271_BUSY_WORD_TIMEOUT; + busy_buf = wl->buffer_busyword; + while (num_busy_bytes) { + num_busy_bytes--; + spi_message_init(&m); + memset(t, 0, sizeof(t)); + t[0].rx_buf = busy_buf; + t[0].len = sizeof(u32); + t[0].cs_change = true; + spi_message_add_tail(&t[0], &m); + spi_sync(wl_to_spi(wl), &m); + + if (*busy_buf & 0x1) + return 0; + } + + /* The SPI bus is unresponsive, the read failed. */ + wl1271_error("SPI read busy-word timeout!\n"); + return -ETIMEDOUT; +} + +static void wl1271_spi_raw_read(struct wl1271 *wl, int addr, void *buf, + size_t len, bool fixed) +{ + struct spi_transfer t[2]; + struct spi_message m; + u32 *busy_buf; + u32 *cmd; + u32 chunk_len; + + while (len > 0) { + chunk_len = min((size_t)WSPI_MAX_CHUNK_SIZE, len); + + cmd = &wl->buffer_cmd; + busy_buf = wl->buffer_busyword; + + *cmd = 0; + *cmd |= WSPI_CMD_READ; + *cmd |= (chunk_len << WSPI_CMD_BYTE_LENGTH_OFFSET) & + WSPI_CMD_BYTE_LENGTH; + *cmd |= addr & WSPI_CMD_BYTE_ADDR; + + if (fixed) + *cmd |= WSPI_CMD_FIXED; + + spi_message_init(&m); + memset(t, 0, sizeof(t)); + + t[0].tx_buf = cmd; + t[0].len = 4; + t[0].cs_change = true; + spi_message_add_tail(&t[0], &m); + + /* Busy and non busy words read */ + t[1].rx_buf = busy_buf; + t[1].len = WL1271_BUSY_WORD_LEN; + t[1].cs_change = true; + spi_message_add_tail(&t[1], &m); + + spi_sync(wl_to_spi(wl), &m); + + if (!(busy_buf[WL1271_BUSY_WORD_CNT - 1] & 0x1) && + wl1271_spi_read_busy(wl)) { + memset(buf, 0, chunk_len); + return; + } + + spi_message_init(&m); + memset(t, 0, sizeof(t)); + + t[0].rx_buf = buf; + t[0].len = chunk_len; + t[0].cs_change = true; + spi_message_add_tail(&t[0], &m); + + spi_sync(wl_to_spi(wl), &m); + + wl1271_dump(DEBUG_SPI, "spi_read cmd -> ", cmd, sizeof(*cmd)); + wl1271_dump(DEBUG_SPI, "spi_read buf <- ", buf, chunk_len); + + if (!fixed) + addr += chunk_len; + buf += chunk_len; + len -= chunk_len; + } +} + +static void wl1271_spi_raw_write(struct wl1271 *wl, int addr, void *buf, + size_t len, bool fixed) +{ + struct spi_transfer t[2 * WSPI_MAX_NUM_OF_CHUNKS]; + struct spi_message m; + u32 commands[WSPI_MAX_NUM_OF_CHUNKS]; + u32 *cmd; + u32 chunk_len; + int i; + + WARN_ON(len > WL1271_AGGR_BUFFER_SIZE); + + spi_message_init(&m); + memset(t, 0, sizeof(t)); + + cmd = &commands[0]; + i = 0; + while (len > 0) { + chunk_len = min((size_t)WSPI_MAX_CHUNK_SIZE, len); + + *cmd = 0; + *cmd |= WSPI_CMD_WRITE; + *cmd |= (chunk_len << WSPI_CMD_BYTE_LENGTH_OFFSET) & + WSPI_CMD_BYTE_LENGTH; + *cmd |= addr & WSPI_CMD_BYTE_ADDR; + + if (fixed) + *cmd |= WSPI_CMD_FIXED; + + t[i].tx_buf = cmd; + t[i].len = sizeof(*cmd); + spi_message_add_tail(&t[i++], &m); + + t[i].tx_buf = buf; + t[i].len = chunk_len; + spi_message_add_tail(&t[i++], &m); + + wl1271_dump(DEBUG_SPI, "spi_write cmd -> ", cmd, sizeof(*cmd)); + wl1271_dump(DEBUG_SPI, "spi_write buf -> ", buf, chunk_len); + + if (!fixed) + addr += chunk_len; + buf += chunk_len; + len -= chunk_len; + cmd++; + } + + spi_sync(wl_to_spi(wl), &m); +} + +static irqreturn_t wl1271_irq(int irq, void *cookie) +{ + struct wl1271 *wl; + unsigned long flags; + + wl1271_debug(DEBUG_IRQ, "IRQ"); + + wl = cookie; + + /* complete the ELP completion */ + spin_lock_irqsave(&wl->wl_lock, flags); + if (wl->elp_compl) { + complete(wl->elp_compl); + wl->elp_compl = NULL; + } + + if (!test_and_set_bit(WL1271_FLAG_IRQ_RUNNING, &wl->flags)) + ieee80211_queue_work(wl->hw, &wl->irq_work); + set_bit(WL1271_FLAG_IRQ_PENDING, &wl->flags); + spin_unlock_irqrestore(&wl->wl_lock, flags); + + return IRQ_HANDLED; +} + +static int wl1271_spi_set_power(struct wl1271 *wl, bool enable) +{ + if (wl->set_power) + wl->set_power(enable); + + return 0; +} + +static struct wl1271_if_operations spi_ops = { + .read = wl1271_spi_raw_read, + .write = wl1271_spi_raw_write, + .reset = wl1271_spi_reset, + .init = wl1271_spi_init, + .power = wl1271_spi_set_power, + .dev = wl1271_spi_wl_to_dev, + .enable_irq = wl1271_spi_enable_interrupts, + .disable_irq = wl1271_spi_disable_interrupts +}; + +static int __devinit wl1271_probe(struct spi_device *spi) +{ + struct wl12xx_platform_data *pdata; + struct ieee80211_hw *hw; + struct wl1271 *wl; + int ret; + + pdata = spi->dev.platform_data; + if (!pdata) { + wl1271_error("no platform data"); + return -ENODEV; + } + + hw = wl1271_alloc_hw(); + if (IS_ERR(hw)) + return PTR_ERR(hw); + + wl = hw->priv; + + dev_set_drvdata(&spi->dev, wl); + wl->if_priv = spi; + + wl->if_ops = &spi_ops; + + /* This is the only SPI value that we need to set here, the rest + * comes from the board-peripherals file */ + spi->bits_per_word = 32; + + ret = spi_setup(spi); + if (ret < 0) { + wl1271_error("spi_setup failed"); + goto out_free; + } + + wl->set_power = pdata->set_power; + if (!wl->set_power) { + wl1271_error("set power function missing in platform data"); + ret = -ENODEV; + goto out_free; + } + + wl->ref_clock = pdata->board_ref_clock; + + wl->irq = spi->irq; + if (wl->irq < 0) { + wl1271_error("irq missing in platform data"); + ret = -ENODEV; + goto out_free; + } + + ret = request_irq(wl->irq, wl1271_irq, 0, DRIVER_NAME, wl); + if (ret < 0) { + wl1271_error("request_irq() failed: %d", ret); + goto out_free; + } + + set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING); + + disable_irq(wl->irq); + + ret = wl1271_init_ieee80211(wl); + if (ret) + goto out_irq; + + ret = wl1271_register_hw(wl); + if (ret) + goto out_irq; + + wl1271_notice("initialized"); + + return 0; + + out_irq: + free_irq(wl->irq, wl); + + out_free: + wl1271_free_hw(wl); + + return ret; +} + +static int __devexit wl1271_remove(struct spi_device *spi) +{ + struct wl1271 *wl = dev_get_drvdata(&spi->dev); + + wl1271_unregister_hw(wl); + free_irq(wl->irq, wl); + wl1271_free_hw(wl); + + return 0; +} + + +static struct spi_driver wl1271_spi_driver = { + .driver = { + .name = "wl1271_spi", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + + .probe = wl1271_probe, + .remove = __devexit_p(wl1271_remove), +}; + +static int __init wl1271_init(void) +{ + int ret; + + ret = spi_register_driver(&wl1271_spi_driver); + if (ret < 0) { + wl1271_error("failed to register spi driver: %d", ret); + goto out; + } + +out: + return ret; +} + +static void __exit wl1271_exit(void) +{ + spi_unregister_driver(&wl1271_spi_driver); + + wl1271_notice("unloaded"); +} + +module_init(wl1271_init); +module_exit(wl1271_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Luciano Coelho "); +MODULE_AUTHOR("Juuso Oikarinen "); +MODULE_FIRMWARE(WL1271_FW_NAME); +MODULE_ALIAS("spi:wl1271"); diff --git a/drivers/net/wireless/wl12xx/testmode.c b/drivers/net/wireless/wl12xx/testmode.c new file mode 100644 index 00000000000..e64403b6896 --- /dev/null +++ b/drivers/net/wireless/wl12xx/testmode.c @@ -0,0 +1,290 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 2010 Nokia Corporation + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ +#include "testmode.h" + +#include +#include + +#include "wl12xx.h" +#include "acx.h" + +#define WL1271_TM_MAX_DATA_LENGTH 1024 + +enum wl1271_tm_commands { + WL1271_TM_CMD_UNSPEC, + WL1271_TM_CMD_TEST, + WL1271_TM_CMD_INTERROGATE, + WL1271_TM_CMD_CONFIGURE, + WL1271_TM_CMD_NVS_PUSH, + WL1271_TM_CMD_SET_PLT_MODE, + WL1271_TM_CMD_RECOVER, + + __WL1271_TM_CMD_AFTER_LAST +}; +#define WL1271_TM_CMD_MAX (__WL1271_TM_CMD_AFTER_LAST - 1) + +enum wl1271_tm_attrs { + WL1271_TM_ATTR_UNSPEC, + WL1271_TM_ATTR_CMD_ID, + WL1271_TM_ATTR_ANSWER, + WL1271_TM_ATTR_DATA, + WL1271_TM_ATTR_IE_ID, + WL1271_TM_ATTR_PLT_MODE, + + __WL1271_TM_ATTR_AFTER_LAST +}; +#define WL1271_TM_ATTR_MAX (__WL1271_TM_ATTR_AFTER_LAST - 1) + +static struct nla_policy wl1271_tm_policy[WL1271_TM_ATTR_MAX + 1] = { + [WL1271_TM_ATTR_CMD_ID] = { .type = NLA_U32 }, + [WL1271_TM_ATTR_ANSWER] = { .type = NLA_U8 }, + [WL1271_TM_ATTR_DATA] = { .type = NLA_BINARY, + .len = WL1271_TM_MAX_DATA_LENGTH }, + [WL1271_TM_ATTR_IE_ID] = { .type = NLA_U32 }, + [WL1271_TM_ATTR_PLT_MODE] = { .type = NLA_U32 }, +}; + + +static int wl1271_tm_cmd_test(struct wl1271 *wl, struct nlattr *tb[]) +{ + int buf_len, ret, len; + struct sk_buff *skb; + void *buf; + u8 answer = 0; + + wl1271_debug(DEBUG_TESTMODE, "testmode cmd test"); + + if (!tb[WL1271_TM_ATTR_DATA]) + return -EINVAL; + + buf = nla_data(tb[WL1271_TM_ATTR_DATA]); + buf_len = nla_len(tb[WL1271_TM_ATTR_DATA]); + + if (tb[WL1271_TM_ATTR_ANSWER]) + answer = nla_get_u8(tb[WL1271_TM_ATTR_ANSWER]); + + if (buf_len > sizeof(struct wl1271_command)) + return -EMSGSIZE; + + mutex_lock(&wl->mutex); + ret = wl1271_cmd_test(wl, buf, buf_len, answer); + mutex_unlock(&wl->mutex); + + if (ret < 0) { + wl1271_warning("testmode cmd test failed: %d", ret); + return ret; + } + + if (answer) { + len = nla_total_size(buf_len); + skb = cfg80211_testmode_alloc_reply_skb(wl->hw->wiphy, len); + if (!skb) + return -ENOMEM; + + NLA_PUT(skb, WL1271_TM_ATTR_DATA, buf_len, buf); + ret = cfg80211_testmode_reply(skb); + if (ret < 0) + return ret; + } + + return 0; + +nla_put_failure: + kfree_skb(skb); + return -EMSGSIZE; +} + +static int wl1271_tm_cmd_interrogate(struct wl1271 *wl, struct nlattr *tb[]) +{ + int ret; + struct wl1271_command *cmd; + struct sk_buff *skb; + u8 ie_id; + + wl1271_debug(DEBUG_TESTMODE, "testmode cmd interrogate"); + + if (!tb[WL1271_TM_ATTR_IE_ID]) + return -EINVAL; + + ie_id = nla_get_u8(tb[WL1271_TM_ATTR_IE_ID]); + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) + return -ENOMEM; + + mutex_lock(&wl->mutex); + ret = wl1271_cmd_interrogate(wl, ie_id, cmd, sizeof(*cmd)); + mutex_unlock(&wl->mutex); + + if (ret < 0) { + wl1271_warning("testmode cmd interrogate failed: %d", ret); + return ret; + } + + skb = cfg80211_testmode_alloc_reply_skb(wl->hw->wiphy, sizeof(*cmd)); + if (!skb) + return -ENOMEM; + + NLA_PUT(skb, WL1271_TM_ATTR_DATA, sizeof(*cmd), cmd); + + return 0; + +nla_put_failure: + kfree_skb(skb); + return -EMSGSIZE; +} + +static int wl1271_tm_cmd_configure(struct wl1271 *wl, struct nlattr *tb[]) +{ + int buf_len, ret; + void *buf; + u8 ie_id; + + wl1271_debug(DEBUG_TESTMODE, "testmode cmd configure"); + + if (!tb[WL1271_TM_ATTR_DATA]) + return -EINVAL; + if (!tb[WL1271_TM_ATTR_IE_ID]) + return -EINVAL; + + ie_id = nla_get_u8(tb[WL1271_TM_ATTR_IE_ID]); + buf = nla_data(tb[WL1271_TM_ATTR_DATA]); + buf_len = nla_len(tb[WL1271_TM_ATTR_DATA]); + + if (buf_len > sizeof(struct wl1271_command)) + return -EMSGSIZE; + + mutex_lock(&wl->mutex); + ret = wl1271_cmd_configure(wl, ie_id, buf, buf_len); + mutex_unlock(&wl->mutex); + + if (ret < 0) { + wl1271_warning("testmode cmd configure failed: %d", ret); + return ret; + } + + return 0; +} + +static int wl1271_tm_cmd_nvs_push(struct wl1271 *wl, struct nlattr *tb[]) +{ + int ret = 0; + size_t len; + void *buf; + + wl1271_debug(DEBUG_TESTMODE, "testmode cmd nvs push"); + + if (!tb[WL1271_TM_ATTR_DATA]) + return -EINVAL; + + buf = nla_data(tb[WL1271_TM_ATTR_DATA]); + len = nla_len(tb[WL1271_TM_ATTR_DATA]); + + mutex_lock(&wl->mutex); + + kfree(wl->nvs); + + wl->nvs = kzalloc(sizeof(struct wl1271_nvs_file), GFP_KERNEL); + if (!wl->nvs) { + wl1271_error("could not allocate memory for the nvs file"); + ret = -ENOMEM; + goto out; + } + + memcpy(wl->nvs, buf, len); + wl->nvs_len = len; + + wl1271_debug(DEBUG_TESTMODE, "testmode pushed nvs"); + +out: + mutex_unlock(&wl->mutex); + + return ret; +} + +static int wl1271_tm_cmd_set_plt_mode(struct wl1271 *wl, struct nlattr *tb[]) +{ + u32 val; + int ret; + + wl1271_debug(DEBUG_TESTMODE, "testmode cmd set plt mode"); + + if (!tb[WL1271_TM_ATTR_PLT_MODE]) + return -EINVAL; + + val = nla_get_u32(tb[WL1271_TM_ATTR_PLT_MODE]); + + switch (val) { + case 0: + ret = wl1271_plt_stop(wl); + break; + case 1: + ret = wl1271_plt_start(wl); + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static int wl1271_tm_cmd_recover(struct wl1271 *wl, struct nlattr *tb[]) +{ + wl1271_debug(DEBUG_TESTMODE, "testmode cmd recover"); + + ieee80211_queue_work(wl->hw, &wl->recovery_work); + + return 0; +} + +int wl1271_tm_cmd(struct ieee80211_hw *hw, void *data, int len) +{ + struct wl1271 *wl = hw->priv; + struct nlattr *tb[WL1271_TM_ATTR_MAX + 1]; + int err; + + err = nla_parse(tb, WL1271_TM_ATTR_MAX, data, len, wl1271_tm_policy); + if (err) + return err; + + if (!tb[WL1271_TM_ATTR_CMD_ID]) + return -EINVAL; + + switch (nla_get_u32(tb[WL1271_TM_ATTR_CMD_ID])) { + case WL1271_TM_CMD_TEST: + return wl1271_tm_cmd_test(wl, tb); + case WL1271_TM_CMD_INTERROGATE: + return wl1271_tm_cmd_interrogate(wl, tb); + case WL1271_TM_CMD_CONFIGURE: + return wl1271_tm_cmd_configure(wl, tb); + case WL1271_TM_CMD_NVS_PUSH: + return wl1271_tm_cmd_nvs_push(wl, tb); + case WL1271_TM_CMD_SET_PLT_MODE: + return wl1271_tm_cmd_set_plt_mode(wl, tb); + case WL1271_TM_CMD_RECOVER: + return wl1271_tm_cmd_recover(wl, tb); + default: + return -EOPNOTSUPP; + } +} diff --git a/drivers/net/wireless/wl12xx/testmode.h b/drivers/net/wireless/wl12xx/testmode.h new file mode 100644 index 00000000000..8071654259e --- /dev/null +++ b/drivers/net/wireless/wl12xx/testmode.h @@ -0,0 +1,31 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 2010 Nokia Corporation + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __TESTMODE_H__ +#define __TESTMODE_H__ + +#include + +int wl1271_tm_cmd(struct ieee80211_hw *hw, void *data, int len); + +#endif /* __WL1271_TESTMODE_H__ */ diff --git a/drivers/net/wireless/wl12xx/tx.c b/drivers/net/wireless/wl12xx/tx.c new file mode 100644 index 00000000000..d332b3f6d0f --- /dev/null +++ b/drivers/net/wireless/wl12xx/tx.c @@ -0,0 +1,485 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 2009 Nokia Corporation + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include + +#include "wl12xx.h" +#include "io.h" +#include "reg.h" +#include "ps.h" +#include "tx.h" + +static int wl1271_alloc_tx_id(struct wl1271 *wl, struct sk_buff *skb) +{ + int id; + + id = find_first_zero_bit(wl->tx_frames_map, ACX_TX_DESCRIPTORS); + if (id >= ACX_TX_DESCRIPTORS) + return -EBUSY; + + __set_bit(id, wl->tx_frames_map); + wl->tx_frames[id] = skb; + wl->tx_frames_cnt++; + return id; +} + +static void wl1271_free_tx_id(struct wl1271 *wl, int id) +{ + if (__test_and_clear_bit(id, wl->tx_frames_map)) { + wl->tx_frames[id] = NULL; + wl->tx_frames_cnt--; + } +} + +static int wl1271_tx_allocate(struct wl1271 *wl, struct sk_buff *skb, u32 extra, + u32 buf_offset) +{ + struct wl1271_tx_hw_descr *desc; + u32 total_len = skb->len + sizeof(struct wl1271_tx_hw_descr) + extra; + u32 total_blocks; + int id, ret = -EBUSY; + + if (buf_offset + total_len > WL1271_AGGR_BUFFER_SIZE) + return -EAGAIN; + + /* allocate free identifier for the packet */ + id = wl1271_alloc_tx_id(wl, skb); + if (id < 0) + return id; + + /* approximate the number of blocks required for this packet + in the firmware */ + total_blocks = total_len + TX_HW_BLOCK_SIZE - 1; + total_blocks = total_blocks / TX_HW_BLOCK_SIZE + TX_HW_BLOCK_SPARE; + if (total_blocks <= wl->tx_blocks_available) { + desc = (struct wl1271_tx_hw_descr *)skb_push( + skb, total_len - skb->len); + + desc->extra_mem_blocks = TX_HW_BLOCK_SPARE; + desc->total_mem_blocks = total_blocks; + desc->id = id; + + wl->tx_blocks_available -= total_blocks; + + ret = 0; + + wl1271_debug(DEBUG_TX, + "tx_allocate: size: %d, blocks: %d, id: %d", + total_len, total_blocks, id); + } else { + wl1271_free_tx_id(wl, id); + } + + return ret; +} + +static void wl1271_tx_fill_hdr(struct wl1271 *wl, struct sk_buff *skb, + u32 extra, struct ieee80211_tx_info *control) +{ + struct timespec ts; + struct wl1271_tx_hw_descr *desc; + int pad, ac; + s64 hosttime; + u16 tx_attr; + + desc = (struct wl1271_tx_hw_descr *) skb->data; + + /* relocate space for security header */ + if (extra) { + void *framestart = skb->data + sizeof(*desc); + u16 fc = *(u16 *)(framestart + extra); + int hdrlen = ieee80211_hdrlen(cpu_to_le16(fc)); + memmove(framestart, framestart + extra, hdrlen); + } + + /* configure packet life time */ + getnstimeofday(&ts); + hosttime = (timespec_to_ns(&ts) >> 10); + desc->start_time = cpu_to_le32(hosttime - wl->time_offset); + desc->life_time = cpu_to_le16(TX_HW_MGMT_PKT_LIFETIME_TU); + + /* configure the tx attributes */ + tx_attr = wl->session_counter << TX_HW_ATTR_OFST_SESSION_COUNTER; + + /* queue (we use same identifiers for tid's and ac's */ + ac = wl1271_tx_get_queue(skb_get_queue_mapping(skb)); + desc->tid = ac; + + desc->aid = TX_HW_DEFAULT_AID; + desc->reserved = 0; + + /* align the length (and store in terms of words) */ + pad = WL1271_TX_ALIGN(skb->len); + desc->length = cpu_to_le16(pad >> 2); + + /* calculate number of padding bytes */ + pad = pad - skb->len; + tx_attr |= pad << TX_HW_ATTR_OFST_LAST_WORD_PAD; + + /* if the packets are destined for AP (have a STA entry) send them + with AP rate policies, otherwise use default basic rates */ + if (control->control.sta) + tx_attr |= ACX_TX_AP_FULL_RATE << TX_HW_ATTR_OFST_RATE_POLICY; + + desc->tx_attr = cpu_to_le16(tx_attr); + + wl1271_debug(DEBUG_TX, "tx_fill_hdr: pad: %d", pad); +} + +/* caller must hold wl->mutex */ +static int wl1271_prepare_tx_frame(struct wl1271 *wl, struct sk_buff *skb, + u32 buf_offset) +{ + struct ieee80211_tx_info *info; + u32 extra = 0; + int ret = 0; + u8 idx; + u32 total_len; + + if (!skb) + return -EINVAL; + + info = IEEE80211_SKB_CB(skb); + + if (info->control.hw_key && + info->control.hw_key->cipher == WLAN_CIPHER_SUITE_TKIP) + extra = WL1271_TKIP_IV_SPACE; + + if (info->control.hw_key) { + idx = info->control.hw_key->hw_key_idx; + + /* FIXME: do we have to do this if we're not using WEP? */ + if (unlikely(wl->default_key != idx)) { + ret = wl1271_cmd_set_default_wep_key(wl, idx); + if (ret < 0) + return ret; + wl->default_key = idx; + } + } + + ret = wl1271_tx_allocate(wl, skb, extra, buf_offset); + if (ret < 0) + return ret; + + wl1271_tx_fill_hdr(wl, skb, extra, info); + + /* + * The length of each packet is stored in terms of words. Thus, we must + * pad the skb data to make sure its length is aligned. + * The number of padding bytes is computed and set in wl1271_tx_fill_hdr + */ + total_len = WL1271_TX_ALIGN(skb->len); + memcpy(wl->aggr_buf + buf_offset, skb->data, skb->len); + memset(wl->aggr_buf + buf_offset + skb->len, 0, total_len - skb->len); + + return total_len; +} + +u32 wl1271_tx_enabled_rates_get(struct wl1271 *wl, u32 rate_set) +{ + struct ieee80211_supported_band *band; + u32 enabled_rates = 0; + int bit; + + band = wl->hw->wiphy->bands[wl->band]; + for (bit = 0; bit < band->n_bitrates; bit++) { + if (rate_set & 0x1) + enabled_rates |= band->bitrates[bit].hw_value; + rate_set >>= 1; + } + +#ifdef CONFIG_WL12XX_HT + /* MCS rates indication are on bits 16 - 23 */ + rate_set >>= HW_HT_RATES_OFFSET - band->n_bitrates; + + for (bit = 0; bit < 8; bit++) { + if (rate_set & 0x1) + enabled_rates |= (CONF_HW_BIT_RATE_MCS_0 << bit); + rate_set >>= 1; + } +#endif + + return enabled_rates; +} + +static void handle_tx_low_watermark(struct wl1271 *wl) +{ + unsigned long flags; + + if (test_bit(WL1271_FLAG_TX_QUEUE_STOPPED, &wl->flags) && + skb_queue_len(&wl->tx_queue) <= WL1271_TX_QUEUE_LOW_WATERMARK) { + /* firmware buffer has space, restart queues */ + spin_lock_irqsave(&wl->wl_lock, flags); + ieee80211_wake_queues(wl->hw); + clear_bit(WL1271_FLAG_TX_QUEUE_STOPPED, &wl->flags); + spin_unlock_irqrestore(&wl->wl_lock, flags); + } +} + +void wl1271_tx_work_locked(struct wl1271 *wl) +{ + struct sk_buff *skb; + bool woken_up = false; + u32 sta_rates = 0; + u32 buf_offset = 0; + bool sent_packets = false; + int ret; + + /* check if the rates supported by the AP have changed */ + if (unlikely(test_and_clear_bit(WL1271_FLAG_STA_RATES_CHANGED, + &wl->flags))) { + unsigned long flags; + + spin_lock_irqsave(&wl->wl_lock, flags); + sta_rates = wl->sta_rate_set; + spin_unlock_irqrestore(&wl->wl_lock, flags); + } + + if (unlikely(wl->state == WL1271_STATE_OFF)) + goto out; + + /* if rates have changed, re-configure the rate policy */ + if (unlikely(sta_rates)) { + ret = wl1271_ps_elp_wakeup(wl, false); + if (ret < 0) + goto out; + woken_up = true; + + wl->rate_set = wl1271_tx_enabled_rates_get(wl, sta_rates); + wl1271_acx_rate_policies(wl); + } + + while ((skb = skb_dequeue(&wl->tx_queue))) { + if (!woken_up) { + ret = wl1271_ps_elp_wakeup(wl, false); + if (ret < 0) + goto out_ack; + woken_up = true; + } + + ret = wl1271_prepare_tx_frame(wl, skb, buf_offset); + if (ret == -EAGAIN) { + /* + * Aggregation buffer is full. + * Flush buffer and try again. + */ + skb_queue_head(&wl->tx_queue, skb); + wl1271_write(wl, WL1271_SLV_MEM_DATA, wl->aggr_buf, + buf_offset, true); + sent_packets = true; + buf_offset = 0; + continue; + } else if (ret == -EBUSY) { + /* + * Firmware buffer is full. + * Queue back last skb, and stop aggregating. + */ + skb_queue_head(&wl->tx_queue, skb); + /* No work left, avoid scheduling redundant tx work */ + set_bit(WL1271_FLAG_FW_TX_BUSY, &wl->flags); + goto out_ack; + } else if (ret < 0) { + dev_kfree_skb(skb); + goto out_ack; + } + buf_offset += ret; + wl->tx_packets_count++; + } + +out_ack: + if (buf_offset) { + wl1271_write(wl, WL1271_SLV_MEM_DATA, wl->aggr_buf, + buf_offset, true); + sent_packets = true; + } + if (sent_packets) { + /* interrupt the firmware with the new packets */ + wl1271_write32(wl, WL1271_HOST_WR_ACCESS, wl->tx_packets_count); + handle_tx_low_watermark(wl); + } + +out: + if (woken_up) + wl1271_ps_elp_sleep(wl); +} + +void wl1271_tx_work(struct work_struct *work) +{ + struct wl1271 *wl = container_of(work, struct wl1271, tx_work); + + mutex_lock(&wl->mutex); + wl1271_tx_work_locked(wl); + mutex_unlock(&wl->mutex); +} + +static void wl1271_tx_complete_packet(struct wl1271 *wl, + struct wl1271_tx_hw_res_descr *result) +{ + struct ieee80211_tx_info *info; + struct sk_buff *skb; + int id = result->id; + int rate = -1; + u8 retries = 0; + + /* check for id legality */ + if (unlikely(id >= ACX_TX_DESCRIPTORS || wl->tx_frames[id] == NULL)) { + wl1271_warning("TX result illegal id: %d", id); + return; + } + + skb = wl->tx_frames[id]; + info = IEEE80211_SKB_CB(skb); + + /* update the TX status info */ + if (result->status == TX_SUCCESS) { + if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) + info->flags |= IEEE80211_TX_STAT_ACK; + rate = wl1271_rate_to_idx(result->rate_class_index, wl->band); + retries = result->ack_failures; + } else if (result->status == TX_RETRY_EXCEEDED) { + wl->stats.excessive_retries++; + retries = result->ack_failures; + } + + info->status.rates[0].idx = rate; + info->status.rates[0].count = retries; + info->status.rates[0].flags = 0; + info->status.ack_signal = -1; + + wl->stats.retry_count += result->ack_failures; + + /* update security sequence number */ + wl->tx_security_seq += (result->lsb_security_sequence_number - + wl->tx_security_last_seq); + wl->tx_security_last_seq = result->lsb_security_sequence_number; + + /* remove private header from packet */ + skb_pull(skb, sizeof(struct wl1271_tx_hw_descr)); + + /* remove TKIP header space if present */ + if (info->control.hw_key && + info->control.hw_key->cipher == WLAN_CIPHER_SUITE_TKIP) { + int hdrlen = ieee80211_get_hdrlen_from_skb(skb); + memmove(skb->data + WL1271_TKIP_IV_SPACE, skb->data, hdrlen); + skb_pull(skb, WL1271_TKIP_IV_SPACE); + } + + wl1271_debug(DEBUG_TX, "tx status id %u skb 0x%p failures %u rate 0x%x" + " status 0x%x", + result->id, skb, result->ack_failures, + result->rate_class_index, result->status); + + /* return the packet to the stack */ + ieee80211_tx_status(wl->hw, skb); + wl1271_free_tx_id(wl, result->id); +} + +/* Called upon reception of a TX complete interrupt */ +void wl1271_tx_complete(struct wl1271 *wl) +{ + struct wl1271_acx_mem_map *memmap = + (struct wl1271_acx_mem_map *)wl->target_mem_map; + u32 count, fw_counter; + u32 i; + + /* read the tx results from the chipset */ + wl1271_read(wl, le32_to_cpu(memmap->tx_result), + wl->tx_res_if, sizeof(*wl->tx_res_if), false); + fw_counter = le32_to_cpu(wl->tx_res_if->tx_result_fw_counter); + + /* write host counter to chipset (to ack) */ + wl1271_write32(wl, le32_to_cpu(memmap->tx_result) + + offsetof(struct wl1271_tx_hw_res_if, + tx_result_host_counter), fw_counter); + + count = fw_counter - wl->tx_results_count; + wl1271_debug(DEBUG_TX, "tx_complete received, packets: %d", count); + + /* verify that the result buffer is not getting overrun */ + if (unlikely(count > TX_HW_RESULT_QUEUE_LEN)) + wl1271_warning("TX result overflow from chipset: %d", count); + + /* process the results */ + for (i = 0; i < count; i++) { + struct wl1271_tx_hw_res_descr *result; + u8 offset = wl->tx_results_count & TX_HW_RESULT_QUEUE_LEN_MASK; + + /* process the packet */ + result = &(wl->tx_res_if->tx_results_queue[offset]); + wl1271_tx_complete_packet(wl, result); + + wl->tx_results_count++; + } +} + +/* caller must hold wl->mutex */ +void wl1271_tx_reset(struct wl1271 *wl) +{ + int i; + struct sk_buff *skb; + + /* TX failure */ + while ((skb = skb_dequeue(&wl->tx_queue))) { + wl1271_debug(DEBUG_TX, "freeing skb 0x%p", skb); + ieee80211_tx_status(wl->hw, skb); + } + + /* + * Make sure the driver is at a consistent state, in case this + * function is called from a context other than interface removal. + */ + handle_tx_low_watermark(wl); + + for (i = 0; i < ACX_TX_DESCRIPTORS; i++) + if (wl->tx_frames[i] != NULL) { + skb = wl->tx_frames[i]; + wl1271_free_tx_id(wl, i); + wl1271_debug(DEBUG_TX, "freeing skb 0x%p", skb); + ieee80211_tx_status(wl->hw, skb); + } +} + +#define WL1271_TX_FLUSH_TIMEOUT 500000 + +/* caller must *NOT* hold wl->mutex */ +void wl1271_tx_flush(struct wl1271 *wl) +{ + unsigned long timeout; + timeout = jiffies + usecs_to_jiffies(WL1271_TX_FLUSH_TIMEOUT); + + while (!time_after(jiffies, timeout)) { + mutex_lock(&wl->mutex); + wl1271_debug(DEBUG_TX, "flushing tx buffer: %d", + wl->tx_frames_cnt); + if ((wl->tx_frames_cnt == 0) && + skb_queue_empty(&wl->tx_queue)) { + mutex_unlock(&wl->mutex); + return; + } + mutex_unlock(&wl->mutex); + msleep(1); + } + + wl1271_warning("Unable to flush all TX buffers, timed out."); +} diff --git a/drivers/net/wireless/wl12xx/tx.h b/drivers/net/wireless/wl12xx/tx.h new file mode 100644 index 00000000000..903e5dc69b7 --- /dev/null +++ b/drivers/net/wireless/wl12xx/tx.h @@ -0,0 +1,150 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 1998-2009 Texas Instruments. All rights reserved. + * Copyright (C) 2009 Nokia Corporation + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __TX_H__ +#define __TX_H__ + +#define TX_HW_BLOCK_SPARE 2 +#define TX_HW_BLOCK_SIZE 252 + +#define TX_HW_MGMT_PKT_LIFETIME_TU 2000 +/* The chipset reference driver states, that the "aid" value 1 + * is for infra-BSS, but is still always used */ +#define TX_HW_DEFAULT_AID 1 + +#define TX_HW_ATTR_SAVE_RETRIES BIT(0) +#define TX_HW_ATTR_HEADER_PAD BIT(1) +#define TX_HW_ATTR_SESSION_COUNTER (BIT(2) | BIT(3) | BIT(4)) +#define TX_HW_ATTR_RATE_POLICY (BIT(5) | BIT(6) | BIT(7) | \ + BIT(8) | BIT(9)) +#define TX_HW_ATTR_LAST_WORD_PAD (BIT(10) | BIT(11)) +#define TX_HW_ATTR_TX_CMPLT_REQ BIT(12) + +#define TX_HW_ATTR_OFST_SAVE_RETRIES 0 +#define TX_HW_ATTR_OFST_HEADER_PAD 1 +#define TX_HW_ATTR_OFST_SESSION_COUNTER 2 +#define TX_HW_ATTR_OFST_RATE_POLICY 5 +#define TX_HW_ATTR_OFST_LAST_WORD_PAD 10 +#define TX_HW_ATTR_OFST_TX_CMPLT_REQ 12 + +#define TX_HW_RESULT_QUEUE_LEN 16 +#define TX_HW_RESULT_QUEUE_LEN_MASK 0xf + +#define WL1271_TX_ALIGN_TO 4 +#define WL1271_TX_ALIGN(len) (((len) + WL1271_TX_ALIGN_TO - 1) & \ + ~(WL1271_TX_ALIGN_TO - 1)) +#define WL1271_TKIP_IV_SPACE 4 + +struct wl1271_tx_hw_descr { + /* Length of packet in words, including descriptor+header+data */ + __le16 length; + /* Number of extra memory blocks to allocate for this packet in + addition to the number of blocks derived from the packet length */ + u8 extra_mem_blocks; + /* Total number of memory blocks allocated by the host for this packet. + Must be equal or greater than the actual blocks number allocated by + HW!! */ + u8 total_mem_blocks; + /* Device time (in us) when the packet arrived to the driver */ + __le32 start_time; + /* Max delay in TUs until transmission. The last device time the + packet can be transmitted is: startTime+(1024*LifeTime) */ + __le16 life_time; + /* Bitwise fields - see TX_ATTR... definitions above. */ + __le16 tx_attr; + /* Packet identifier used also in the Tx-Result. */ + u8 id; + /* The packet TID value (as User-Priority) */ + u8 tid; + /* Identifier of the remote STA in IBSS, 1 in infra-BSS */ + u8 aid; + u8 reserved; +} __packed; + +enum wl1271_tx_hw_res_status { + TX_SUCCESS = 0, + TX_HW_ERROR = 1, + TX_DISABLED = 2, + TX_RETRY_EXCEEDED = 3, + TX_TIMEOUT = 4, + TX_KEY_NOT_FOUND = 5, + TX_PEER_NOT_FOUND = 6, + TX_SESSION_MISMATCH = 7 +}; + +struct wl1271_tx_hw_res_descr { + /* Packet Identifier - same value used in the Tx descriptor.*/ + u8 id; + /* The status of the transmission, indicating success or one of + several possible reasons for failure. */ + u8 status; + /* Total air access duration including all retrys and overheads.*/ + __le16 medium_usage; + /* The time passed from host xfer to Tx-complete.*/ + __le32 fw_handling_time; + /* Total media delay + (from 1st EDCA AIFS counter until TX Complete). */ + __le32 medium_delay; + /* LS-byte of last TKIP seq-num (saved per AC for recovery). */ + u8 lsb_security_sequence_number; + /* Retry count - number of transmissions without successful ACK.*/ + u8 ack_failures; + /* The rate that succeeded getting ACK + (Valid only if status=SUCCESS). */ + u8 rate_class_index; + /* for 4-byte alignment. */ + u8 spare; +} __packed; + +struct wl1271_tx_hw_res_if { + __le32 tx_result_fw_counter; + __le32 tx_result_host_counter; + struct wl1271_tx_hw_res_descr tx_results_queue[TX_HW_RESULT_QUEUE_LEN]; +} __packed; + +static inline int wl1271_tx_get_queue(int queue) +{ + switch (queue) { + case 0: + return CONF_TX_AC_VO; + case 1: + return CONF_TX_AC_VI; + case 2: + return CONF_TX_AC_BE; + case 3: + return CONF_TX_AC_BK; + default: + return CONF_TX_AC_BE; + } +} + +void wl1271_tx_work(struct work_struct *work); +void wl1271_tx_work_locked(struct wl1271 *wl); +void wl1271_tx_complete(struct wl1271 *wl); +void wl1271_tx_reset(struct wl1271 *wl); +void wl1271_tx_flush(struct wl1271 *wl); +u8 wl1271_rate_to_idx(int rate, enum ieee80211_band band); +u32 wl1271_tx_enabled_rates_get(struct wl1271 *wl, u32 rate_set); + +#endif diff --git a/drivers/net/wireless/wl12xx/wl1271.h b/drivers/net/wireless/wl12xx/wl1271.h deleted file mode 100644 index ab53162b434..00000000000 --- a/drivers/net/wireless/wl12xx/wl1271.h +++ /dev/null @@ -1,523 +0,0 @@ -/* - * This file is part of wl1271 - * - * Copyright (C) 1998-2009 Texas Instruments. All rights reserved. - * Copyright (C) 2008-2009 Nokia Corporation - * - * Contact: Luciano Coelho - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __WL1271_H__ -#define __WL1271_H__ - -#include -#include -#include -#include -#include -#include - -#include "wl1271_conf.h" -#include "wl1271_ini.h" - -#define DRIVER_NAME "wl1271" -#define DRIVER_PREFIX DRIVER_NAME ": " - -enum { - DEBUG_NONE = 0, - DEBUG_IRQ = BIT(0), - DEBUG_SPI = BIT(1), - DEBUG_BOOT = BIT(2), - DEBUG_MAILBOX = BIT(3), - DEBUG_TESTMODE = BIT(4), - DEBUG_EVENT = BIT(5), - DEBUG_TX = BIT(6), - DEBUG_RX = BIT(7), - DEBUG_SCAN = BIT(8), - DEBUG_CRYPT = BIT(9), - DEBUG_PSM = BIT(10), - DEBUG_MAC80211 = BIT(11), - DEBUG_CMD = BIT(12), - DEBUG_ACX = BIT(13), - DEBUG_SDIO = BIT(14), - DEBUG_FILTERS = BIT(15), - DEBUG_ADHOC = BIT(16), - DEBUG_ALL = ~0, -}; - -#define DEBUG_LEVEL (DEBUG_NONE) - -#define DEBUG_DUMP_LIMIT 1024 - -#define wl1271_error(fmt, arg...) \ - printk(KERN_ERR DRIVER_PREFIX "ERROR " fmt "\n", ##arg) - -#define wl1271_warning(fmt, arg...) \ - printk(KERN_WARNING DRIVER_PREFIX "WARNING " fmt "\n", ##arg) - -#define wl1271_notice(fmt, arg...) \ - printk(KERN_INFO DRIVER_PREFIX fmt "\n", ##arg) - -#define wl1271_info(fmt, arg...) \ - printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg) - -#define wl1271_debug(level, fmt, arg...) \ - do { \ - if (level & DEBUG_LEVEL) \ - printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg); \ - } while (0) - -#define wl1271_dump(level, prefix, buf, len) \ - do { \ - if (level & DEBUG_LEVEL) \ - print_hex_dump(KERN_DEBUG, DRIVER_PREFIX prefix, \ - DUMP_PREFIX_OFFSET, 16, 1, \ - buf, \ - min_t(size_t, len, DEBUG_DUMP_LIMIT), \ - 0); \ - } while (0) - -#define wl1271_dump_ascii(level, prefix, buf, len) \ - do { \ - if (level & DEBUG_LEVEL) \ - print_hex_dump(KERN_DEBUG, DRIVER_PREFIX prefix, \ - DUMP_PREFIX_OFFSET, 16, 1, \ - buf, \ - min_t(size_t, len, DEBUG_DUMP_LIMIT), \ - true); \ - } while (0) - -#define WL1271_DEFAULT_RX_CONFIG (CFG_UNI_FILTER_EN | \ - CFG_BSSID_FILTER_EN | \ - CFG_MC_FILTER_EN) - -#define WL1271_DEFAULT_RX_FILTER (CFG_RX_RCTS_ACK | CFG_RX_PRSP_EN | \ - CFG_RX_MGMT_EN | CFG_RX_DATA_EN | \ - CFG_RX_CTL_EN | CFG_RX_BCN_EN | \ - CFG_RX_AUTH_EN | CFG_RX_ASSOC_EN) - -#define WL1271_FW_NAME "wl1271-fw.bin" -#define WL1271_NVS_NAME "wl1271-nvs.bin" - -#define WL1271_TX_SECURITY_LO16(s) ((u16)((s) & 0xffff)) -#define WL1271_TX_SECURITY_HI32(s) ((u32)(((s) >> 16) & 0xffffffff)) - -#define WL1271_CIPHER_SUITE_GEM 0x00147201 - -#define WL1271_BUSY_WORD_CNT 1 -#define WL1271_BUSY_WORD_LEN (WL1271_BUSY_WORD_CNT * sizeof(u32)) - -#define WL1271_ELP_HW_STATE_ASLEEP 0 -#define WL1271_ELP_HW_STATE_IRQ 1 - -#define WL1271_DEFAULT_BEACON_INT 100 -#define WL1271_DEFAULT_DTIM_PERIOD 1 - -#define ACX_TX_DESCRIPTORS 32 - -#define WL1271_AGGR_BUFFER_SIZE (4 * PAGE_SIZE) - -enum wl1271_state { - WL1271_STATE_OFF, - WL1271_STATE_ON, - WL1271_STATE_PLT, -}; - -enum wl1271_partition_type { - PART_DOWN, - PART_WORK, - PART_DRPW, - - PART_TABLE_LEN -}; - -struct wl1271_partition { - u32 size; - u32 start; -}; - -struct wl1271_partition_set { - struct wl1271_partition mem; - struct wl1271_partition reg; - struct wl1271_partition mem2; - struct wl1271_partition mem3; -}; - -struct wl1271; - -/* FIXME: I'm not sure about this structure name */ -struct wl1271_chip { - u32 id; - char fw_ver[21]; -}; - -struct wl1271_stats { - struct acx_statistics *fw_stats; - unsigned long fw_stats_update; - - unsigned int retry_count; - unsigned int excessive_retries; -}; - -struct wl1271_debugfs { - struct dentry *rootdir; - struct dentry *fw_statistics; - - struct dentry *tx_internal_desc_overflow; - - struct dentry *rx_out_of_mem; - struct dentry *rx_hdr_overflow; - struct dentry *rx_hw_stuck; - struct dentry *rx_dropped; - struct dentry *rx_fcs_err; - struct dentry *rx_xfr_hint_trig; - struct dentry *rx_path_reset; - struct dentry *rx_reset_counter; - - struct dentry *dma_rx_requested; - struct dentry *dma_rx_errors; - struct dentry *dma_tx_requested; - struct dentry *dma_tx_errors; - - struct dentry *isr_cmd_cmplt; - struct dentry *isr_fiqs; - struct dentry *isr_rx_headers; - struct dentry *isr_rx_mem_overflow; - struct dentry *isr_rx_rdys; - struct dentry *isr_irqs; - struct dentry *isr_tx_procs; - struct dentry *isr_decrypt_done; - struct dentry *isr_dma0_done; - struct dentry *isr_dma1_done; - struct dentry *isr_tx_exch_complete; - struct dentry *isr_commands; - struct dentry *isr_rx_procs; - struct dentry *isr_hw_pm_mode_changes; - struct dentry *isr_host_acknowledges; - struct dentry *isr_pci_pm; - struct dentry *isr_wakeups; - struct dentry *isr_low_rssi; - - struct dentry *wep_addr_key_count; - struct dentry *wep_default_key_count; - /* skipping wep.reserved */ - struct dentry *wep_key_not_found; - struct dentry *wep_decrypt_fail; - struct dentry *wep_packets; - struct dentry *wep_interrupt; - - struct dentry *pwr_ps_enter; - struct dentry *pwr_elp_enter; - struct dentry *pwr_missing_bcns; - struct dentry *pwr_wake_on_host; - struct dentry *pwr_wake_on_timer_exp; - struct dentry *pwr_tx_with_ps; - struct dentry *pwr_tx_without_ps; - struct dentry *pwr_rcvd_beacons; - struct dentry *pwr_power_save_off; - struct dentry *pwr_enable_ps; - struct dentry *pwr_disable_ps; - struct dentry *pwr_fix_tsf_ps; - /* skipping cont_miss_bcns_spread for now */ - struct dentry *pwr_rcvd_awake_beacons; - - struct dentry *mic_rx_pkts; - struct dentry *mic_calc_failure; - - struct dentry *aes_encrypt_fail; - struct dentry *aes_decrypt_fail; - struct dentry *aes_encrypt_packets; - struct dentry *aes_decrypt_packets; - struct dentry *aes_encrypt_interrupt; - struct dentry *aes_decrypt_interrupt; - - struct dentry *event_heart_beat; - struct dentry *event_calibration; - struct dentry *event_rx_mismatch; - struct dentry *event_rx_mem_empty; - struct dentry *event_rx_pool; - struct dentry *event_oom_late; - struct dentry *event_phy_transmit_error; - struct dentry *event_tx_stuck; - - struct dentry *ps_pspoll_timeouts; - struct dentry *ps_upsd_timeouts; - struct dentry *ps_upsd_max_sptime; - struct dentry *ps_upsd_max_apturn; - struct dentry *ps_pspoll_max_apturn; - struct dentry *ps_pspoll_utilization; - struct dentry *ps_upsd_utilization; - - struct dentry *rxpipe_rx_prep_beacon_drop; - struct dentry *rxpipe_descr_host_int_trig_rx_data; - struct dentry *rxpipe_beacon_buffer_thres_host_int_trig_rx_data; - struct dentry *rxpipe_missed_beacon_host_int_trig_rx_data; - struct dentry *rxpipe_tx_xfr_host_int_trig_rx_data; - - struct dentry *tx_queue_len; - - struct dentry *retry_count; - struct dentry *excessive_retries; - struct dentry *gpio_power; -}; - -#define NUM_TX_QUEUES 4 -#define NUM_RX_PKT_DESC 8 - -/* FW status registers */ -struct wl1271_fw_status { - __le32 intr; - u8 fw_rx_counter; - u8 drv_rx_counter; - u8 reserved; - u8 tx_results_counter; - __le32 rx_pkt_descs[NUM_RX_PKT_DESC]; - __le32 tx_released_blks[NUM_TX_QUEUES]; - __le32 fw_localtime; - __le32 padding[2]; -} __packed; - -struct wl1271_rx_mem_pool_addr { - u32 addr; - u32 addr_extra; -}; - -struct wl1271_scan { - struct cfg80211_scan_request *req; - bool *scanned_ch; - bool failed; - u8 state; - u8 ssid[IW_ESSID_MAX_SIZE+1]; - size_t ssid_len; -}; - -struct wl1271_if_operations { - void (*read)(struct wl1271 *wl, int addr, void *buf, size_t len, - bool fixed); - void (*write)(struct wl1271 *wl, int addr, void *buf, size_t len, - bool fixed); - void (*reset)(struct wl1271 *wl); - void (*init)(struct wl1271 *wl); - int (*power)(struct wl1271 *wl, bool enable); - struct device* (*dev)(struct wl1271 *wl); - void (*enable_irq)(struct wl1271 *wl); - void (*disable_irq)(struct wl1271 *wl); -}; - -struct wl1271 { - struct platform_device *plat_dev; - struct ieee80211_hw *hw; - bool mac80211_registered; - - void *if_priv; - - struct wl1271_if_operations *if_ops; - - void (*set_power)(bool enable); - int irq; - int ref_clock; - - spinlock_t wl_lock; - - enum wl1271_state state; - struct mutex mutex; - -#define WL1271_FLAG_STA_RATES_CHANGED (0) -#define WL1271_FLAG_STA_ASSOCIATED (1) -#define WL1271_FLAG_JOINED (2) -#define WL1271_FLAG_GPIO_POWER (3) -#define WL1271_FLAG_TX_QUEUE_STOPPED (4) -#define WL1271_FLAG_IN_ELP (5) -#define WL1271_FLAG_PSM (6) -#define WL1271_FLAG_PSM_REQUESTED (7) -#define WL1271_FLAG_IRQ_PENDING (8) -#define WL1271_FLAG_IRQ_RUNNING (9) -#define WL1271_FLAG_IDLE (10) -#define WL1271_FLAG_IDLE_REQUESTED (11) -#define WL1271_FLAG_PSPOLL_FAILURE (12) -#define WL1271_FLAG_STA_STATE_SENT (13) -#define WL1271_FLAG_FW_TX_BUSY (14) - unsigned long flags; - - struct wl1271_partition_set part; - - struct wl1271_chip chip; - - int cmd_box_addr; - int event_box_addr; - - u8 *fw; - size_t fw_len; - struct wl1271_nvs_file *nvs; - size_t nvs_len; - - s8 hw_pg_ver; - - u8 bssid[ETH_ALEN]; - u8 mac_addr[ETH_ALEN]; - u8 bss_type; - u8 set_bss_type; - u8 ssid[IW_ESSID_MAX_SIZE + 1]; - u8 ssid_len; - int channel; - - struct wl1271_acx_mem_map *target_mem_map; - - /* Accounting for allocated / available TX blocks on HW */ - u32 tx_blocks_freed[NUM_TX_QUEUES]; - u32 tx_blocks_available; - u32 tx_results_count; - - /* Transmitted TX packets counter for chipset interface */ - u32 tx_packets_count; - - /* Time-offset between host and chipset clocks */ - s64 time_offset; - - /* Session counter for the chipset */ - int session_counter; - - /* Frames scheduled for transmission, not handled yet */ - struct sk_buff_head tx_queue; - - struct work_struct tx_work; - - /* Pending TX frames */ - unsigned long tx_frames_map[BITS_TO_LONGS(ACX_TX_DESCRIPTORS)]; - struct sk_buff *tx_frames[ACX_TX_DESCRIPTORS]; - int tx_frames_cnt; - - /* Security sequence number counters */ - u8 tx_security_last_seq; - s64 tx_security_seq; - - /* FW Rx counter */ - u32 rx_counter; - - /* Rx memory pool address */ - struct wl1271_rx_mem_pool_addr rx_mem_pool_addr; - - /* Intermediate buffer, used for packet aggregation */ - u8 *aggr_buf; - - /* The target interrupt mask */ - struct work_struct irq_work; - - /* Hardware recovery work */ - struct work_struct recovery_work; - - /* The mbox event mask */ - u32 event_mask; - - /* Mailbox pointers */ - u32 mbox_ptr[2]; - - /* Are we currently scanning */ - struct wl1271_scan scan; - struct delayed_work scan_complete_work; - - /* Our association ID */ - u16 aid; - - /* - * currently configured rate set: - * bits 0-15 - 802.11abg rates - * bits 16-23 - 802.11n MCS index mask - * support only 1 stream, thus only 8 bits for the MCS rates (0-7). - */ - u32 sta_rate_set; - u32 basic_rate_set; - u32 basic_rate; - u32 rate_set; - - /* The current band */ - enum ieee80211_band band; - - /* Beaconing interval (needed for ad-hoc) */ - u32 beacon_int; - - /* Default key (for WEP) */ - u32 default_key; - - unsigned int filters; - unsigned int rx_config; - unsigned int rx_filter; - - struct completion *elp_compl; - struct delayed_work elp_work; - struct delayed_work pspoll_work; - - /* counter for ps-poll delivery failures */ - int ps_poll_failures; - - /* retry counter for PSM entries */ - u8 psm_entry_retry; - - /* in dBm */ - int power_level; - - int rssi_thold; - int last_rssi_event; - - struct wl1271_stats stats; - struct wl1271_debugfs debugfs; - - __le32 buffer_32; - u32 buffer_cmd; - u32 buffer_busyword[WL1271_BUSY_WORD_CNT]; - - struct wl1271_fw_status *fw_status; - struct wl1271_tx_hw_res_if *tx_res_if; - - struct ieee80211_vif *vif; - - /* Current chipset configuration */ - struct conf_drv_settings conf; - - bool sg_enabled; - - bool enable_11a; - - struct list_head list; - - /* Most recently reported noise in dBm */ - s8 noise; -}; - -int wl1271_plt_start(struct wl1271 *wl); -int wl1271_plt_stop(struct wl1271 *wl); - -#define JOIN_TIMEOUT 5000 /* 5000 milliseconds to join */ - -#define SESSION_COUNTER_MAX 7 /* maximum value for the session counter */ - -#define WL1271_DEFAULT_POWER_LEVEL 0 - -#define WL1271_TX_QUEUE_LOW_WATERMARK 10 -#define WL1271_TX_QUEUE_HIGH_WATERMARK 25 - -/* WL1271 needs a 200ms sleep after power on, and a 20ms sleep before power - on in case is has been shut down shortly before */ -#define WL1271_PRE_POWER_ON_SLEEP 20 /* in miliseconds */ -#define WL1271_POWER_ON_SLEEP 200 /* in miliseconds */ - -/* Macros to handle wl1271.sta_rate_set */ -#define HW_BG_RATES_MASK 0xffff -#define HW_HT_RATES_OFFSET 16 - -#endif diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.c b/drivers/net/wireless/wl12xx/wl1271_acx.c deleted file mode 100644 index bd7f95f4eef..00000000000 --- a/drivers/net/wireless/wl12xx/wl1271_acx.c +++ /dev/null @@ -1,1336 +0,0 @@ -/* - * This file is part of wl1271 - * - * Copyright (C) 2008-2009 Nokia Corporation - * - * Contact: Luciano Coelho - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include "wl1271_acx.h" - -#include -#include -#include -#include -#include - -#include "wl1271.h" -#include "wl12xx_80211.h" -#include "wl1271_reg.h" -#include "wl1271_ps.h" - -int wl1271_acx_wake_up_conditions(struct wl1271 *wl) -{ - struct acx_wake_up_condition *wake_up; - int ret; - - wl1271_debug(DEBUG_ACX, "acx wake up conditions"); - - wake_up = kzalloc(sizeof(*wake_up), GFP_KERNEL); - if (!wake_up) { - ret = -ENOMEM; - goto out; - } - - wake_up->wake_up_event = wl->conf.conn.wake_up_event; - wake_up->listen_interval = wl->conf.conn.listen_interval; - - ret = wl1271_cmd_configure(wl, ACX_WAKE_UP_CONDITIONS, - wake_up, sizeof(*wake_up)); - if (ret < 0) { - wl1271_warning("could not set wake up conditions: %d", ret); - goto out; - } - -out: - kfree(wake_up); - return ret; -} - -int wl1271_acx_sleep_auth(struct wl1271 *wl, u8 sleep_auth) -{ - struct acx_sleep_auth *auth; - int ret; - - wl1271_debug(DEBUG_ACX, "acx sleep auth"); - - auth = kzalloc(sizeof(*auth), GFP_KERNEL); - if (!auth) { - ret = -ENOMEM; - goto out; - } - - auth->sleep_auth = sleep_auth; - - ret = wl1271_cmd_configure(wl, ACX_SLEEP_AUTH, auth, sizeof(*auth)); - if (ret < 0) - return ret; - -out: - kfree(auth); - return ret; -} - -int wl1271_acx_tx_power(struct wl1271 *wl, int power) -{ - struct acx_current_tx_power *acx; - int ret; - - wl1271_debug(DEBUG_ACX, "acx dot11_cur_tx_pwr"); - - if (power < 0 || power > 25) - return -EINVAL; - - acx = kzalloc(sizeof(*acx), GFP_KERNEL); - if (!acx) { - ret = -ENOMEM; - goto out; - } - - acx->current_tx_power = power * 10; - - ret = wl1271_cmd_configure(wl, DOT11_CUR_TX_PWR, acx, sizeof(*acx)); - if (ret < 0) { - wl1271_warning("configure of tx power failed: %d", ret); - goto out; - } - -out: - kfree(acx); - return ret; -} - -int wl1271_acx_feature_cfg(struct wl1271 *wl) -{ - struct acx_feature_config *feature; - int ret; - - wl1271_debug(DEBUG_ACX, "acx feature cfg"); - - feature = kzalloc(sizeof(*feature), GFP_KERNEL); - if (!feature) { - ret = -ENOMEM; - goto out; - } - - /* DF_ENCRYPTION_DISABLE and DF_SNIFF_MODE_ENABLE are disabled */ - feature->data_flow_options = 0; - feature->options = 0; - - ret = wl1271_cmd_configure(wl, ACX_FEATURE_CFG, - feature, sizeof(*feature)); - if (ret < 0) { - wl1271_error("Couldnt set HW encryption"); - goto out; - } - -out: - kfree(feature); - return ret; -} - -int wl1271_acx_mem_map(struct wl1271 *wl, struct acx_header *mem_map, - size_t len) -{ - int ret; - - wl1271_debug(DEBUG_ACX, "acx mem map"); - - ret = wl1271_cmd_interrogate(wl, ACX_MEM_MAP, mem_map, len); - if (ret < 0) - return ret; - - return 0; -} - -int wl1271_acx_rx_msdu_life_time(struct wl1271 *wl) -{ - struct acx_rx_msdu_lifetime *acx; - int ret; - - wl1271_debug(DEBUG_ACX, "acx rx msdu life time"); - - acx = kzalloc(sizeof(*acx), GFP_KERNEL); - if (!acx) { - ret = -ENOMEM; - goto out; - } - - acx->lifetime = cpu_to_le32(wl->conf.rx.rx_msdu_life_time); - ret = wl1271_cmd_configure(wl, DOT11_RX_MSDU_LIFE_TIME, - acx, sizeof(*acx)); - if (ret < 0) { - wl1271_warning("failed to set rx msdu life time: %d", ret); - goto out; - } - -out: - kfree(acx); - return ret; -} - -int wl1271_acx_rx_config(struct wl1271 *wl, u32 config, u32 filter) -{ - struct acx_rx_config *rx_config; - int ret; - - wl1271_debug(DEBUG_ACX, "acx rx config"); - - rx_config = kzalloc(sizeof(*rx_config), GFP_KERNEL); - if (!rx_config) { - ret = -ENOMEM; - goto out; - } - - rx_config->config_options = cpu_to_le32(config); - rx_config->filter_options = cpu_to_le32(filter); - - ret = wl1271_cmd_configure(wl, ACX_RX_CFG, - rx_config, sizeof(*rx_config)); - if (ret < 0) { - wl1271_warning("failed to set rx config: %d", ret); - goto out; - } - -out: - kfree(rx_config); - return ret; -} - -int wl1271_acx_pd_threshold(struct wl1271 *wl) -{ - struct acx_packet_detection *pd; - int ret; - - wl1271_debug(DEBUG_ACX, "acx data pd threshold"); - - pd = kzalloc(sizeof(*pd), GFP_KERNEL); - if (!pd) { - ret = -ENOMEM; - goto out; - } - - pd->threshold = cpu_to_le32(wl->conf.rx.packet_detection_threshold); - - ret = wl1271_cmd_configure(wl, ACX_PD_THRESHOLD, pd, sizeof(*pd)); - if (ret < 0) { - wl1271_warning("failed to set pd threshold: %d", ret); - goto out; - } - -out: - kfree(pd); - return ret; -} - -int wl1271_acx_slot(struct wl1271 *wl, enum acx_slot_type slot_time) -{ - struct acx_slot *slot; - int ret; - - wl1271_debug(DEBUG_ACX, "acx slot"); - - slot = kzalloc(sizeof(*slot), GFP_KERNEL); - if (!slot) { - ret = -ENOMEM; - goto out; - } - - slot->wone_index = STATION_WONE_INDEX; - slot->slot_time = slot_time; - - ret = wl1271_cmd_configure(wl, ACX_SLOT, slot, sizeof(*slot)); - if (ret < 0) { - wl1271_warning("failed to set slot time: %d", ret); - goto out; - } - -out: - kfree(slot); - return ret; -} - -int wl1271_acx_group_address_tbl(struct wl1271 *wl, bool enable, - void *mc_list, u32 mc_list_len) -{ - struct acx_dot11_grp_addr_tbl *acx; - int ret; - - wl1271_debug(DEBUG_ACX, "acx group address tbl"); - - acx = kzalloc(sizeof(*acx), GFP_KERNEL); - if (!acx) { - ret = -ENOMEM; - goto out; - } - - /* MAC filtering */ - acx->enabled = enable; - acx->num_groups = mc_list_len; - memcpy(acx->mac_table, mc_list, mc_list_len * ETH_ALEN); - - ret = wl1271_cmd_configure(wl, DOT11_GROUP_ADDRESS_TBL, - acx, sizeof(*acx)); - if (ret < 0) { - wl1271_warning("failed to set group addr table: %d", ret); - goto out; - } - -out: - kfree(acx); - return ret; -} - -int wl1271_acx_service_period_timeout(struct wl1271 *wl) -{ - struct acx_rx_timeout *rx_timeout; - int ret; - - rx_timeout = kzalloc(sizeof(*rx_timeout), GFP_KERNEL); - if (!rx_timeout) { - ret = -ENOMEM; - goto out; - } - - wl1271_debug(DEBUG_ACX, "acx service period timeout"); - - rx_timeout->ps_poll_timeout = cpu_to_le16(wl->conf.rx.ps_poll_timeout); - rx_timeout->upsd_timeout = cpu_to_le16(wl->conf.rx.upsd_timeout); - - ret = wl1271_cmd_configure(wl, ACX_SERVICE_PERIOD_TIMEOUT, - rx_timeout, sizeof(*rx_timeout)); - if (ret < 0) { - wl1271_warning("failed to set service period timeout: %d", - ret); - goto out; - } - -out: - kfree(rx_timeout); - return ret; -} - -int wl1271_acx_rts_threshold(struct wl1271 *wl, u16 rts_threshold) -{ - struct acx_rts_threshold *rts; - int ret; - - wl1271_debug(DEBUG_ACX, "acx rts threshold"); - - rts = kzalloc(sizeof(*rts), GFP_KERNEL); - if (!rts) { - ret = -ENOMEM; - goto out; - } - - rts->threshold = cpu_to_le16(rts_threshold); - - ret = wl1271_cmd_configure(wl, DOT11_RTS_THRESHOLD, rts, sizeof(*rts)); - if (ret < 0) { - wl1271_warning("failed to set rts threshold: %d", ret); - goto out; - } - -out: - kfree(rts); - return ret; -} - -int wl1271_acx_dco_itrim_params(struct wl1271 *wl) -{ - struct acx_dco_itrim_params *dco; - struct conf_itrim_settings *c = &wl->conf.itrim; - int ret; - - wl1271_debug(DEBUG_ACX, "acx dco itrim parameters"); - - dco = kzalloc(sizeof(*dco), GFP_KERNEL); - if (!dco) { - ret = -ENOMEM; - goto out; - } - - dco->enable = c->enable; - dco->timeout = cpu_to_le32(c->timeout); - - ret = wl1271_cmd_configure(wl, ACX_SET_DCO_ITRIM_PARAMS, - dco, sizeof(*dco)); - if (ret < 0) { - wl1271_warning("failed to set dco itrim parameters: %d", ret); - goto out; - } - -out: - kfree(dco); - return ret; -} - -int wl1271_acx_beacon_filter_opt(struct wl1271 *wl, bool enable_filter) -{ - struct acx_beacon_filter_option *beacon_filter = NULL; - int ret = 0; - - wl1271_debug(DEBUG_ACX, "acx beacon filter opt"); - - if (enable_filter && - wl->conf.conn.bcn_filt_mode == CONF_BCN_FILT_MODE_DISABLED) - goto out; - - beacon_filter = kzalloc(sizeof(*beacon_filter), GFP_KERNEL); - if (!beacon_filter) { - ret = -ENOMEM; - goto out; - } - - beacon_filter->enable = enable_filter; - - /* - * When set to zero, and the filter is enabled, beacons - * without the unicast TIM bit set are dropped. - */ - beacon_filter->max_num_beacons = 0; - - ret = wl1271_cmd_configure(wl, ACX_BEACON_FILTER_OPT, - beacon_filter, sizeof(*beacon_filter)); - if (ret < 0) { - wl1271_warning("failed to set beacon filter opt: %d", ret); - goto out; - } - -out: - kfree(beacon_filter); - return ret; -} - -int wl1271_acx_beacon_filter_table(struct wl1271 *wl) -{ - struct acx_beacon_filter_ie_table *ie_table; - int i, idx = 0; - int ret; - bool vendor_spec = false; - - wl1271_debug(DEBUG_ACX, "acx beacon filter table"); - - ie_table = kzalloc(sizeof(*ie_table), GFP_KERNEL); - if (!ie_table) { - ret = -ENOMEM; - goto out; - } - - /* configure default beacon pass-through rules */ - ie_table->num_ie = 0; - for (i = 0; i < wl->conf.conn.bcn_filt_ie_count; i++) { - struct conf_bcn_filt_rule *r = &(wl->conf.conn.bcn_filt_ie[i]); - ie_table->table[idx++] = r->ie; - ie_table->table[idx++] = r->rule; - - if (r->ie == WLAN_EID_VENDOR_SPECIFIC) { - /* only one vendor specific ie allowed */ - if (vendor_spec) - continue; - - /* for vendor specific rules configure the - additional fields */ - memcpy(&(ie_table->table[idx]), r->oui, - CONF_BCN_IE_OUI_LEN); - idx += CONF_BCN_IE_OUI_LEN; - ie_table->table[idx++] = r->type; - memcpy(&(ie_table->table[idx]), r->version, - CONF_BCN_IE_VER_LEN); - idx += CONF_BCN_IE_VER_LEN; - vendor_spec = true; - } - - ie_table->num_ie++; - } - - ret = wl1271_cmd_configure(wl, ACX_BEACON_FILTER_TABLE, - ie_table, sizeof(*ie_table)); - if (ret < 0) { - wl1271_warning("failed to set beacon filter table: %d", ret); - goto out; - } - -out: - kfree(ie_table); - return ret; -} - -#define ACX_CONN_MONIT_DISABLE_VALUE 0xffffffff - -int wl1271_acx_conn_monit_params(struct wl1271 *wl, bool enable) -{ - struct acx_conn_monit_params *acx; - u32 threshold = ACX_CONN_MONIT_DISABLE_VALUE; - u32 timeout = ACX_CONN_MONIT_DISABLE_VALUE; - int ret; - - wl1271_debug(DEBUG_ACX, "acx connection monitor parameters: %s", - enable ? "enabled" : "disabled"); - - acx = kzalloc(sizeof(*acx), GFP_KERNEL); - if (!acx) { - ret = -ENOMEM; - goto out; - } - - if (enable) { - threshold = wl->conf.conn.synch_fail_thold; - timeout = wl->conf.conn.bss_lose_timeout; - } - - acx->synch_fail_thold = cpu_to_le32(threshold); - acx->bss_lose_timeout = cpu_to_le32(timeout); - - ret = wl1271_cmd_configure(wl, ACX_CONN_MONIT_PARAMS, - acx, sizeof(*acx)); - if (ret < 0) { - wl1271_warning("failed to set connection monitor " - "parameters: %d", ret); - goto out; - } - -out: - kfree(acx); - return ret; -} - - -int wl1271_acx_sg_enable(struct wl1271 *wl, bool enable) -{ - struct acx_bt_wlan_coex *pta; - int ret; - - wl1271_debug(DEBUG_ACX, "acx sg enable"); - - pta = kzalloc(sizeof(*pta), GFP_KERNEL); - if (!pta) { - ret = -ENOMEM; - goto out; - } - - if (enable) - pta->enable = wl->conf.sg.state; - else - pta->enable = CONF_SG_DISABLE; - - ret = wl1271_cmd_configure(wl, ACX_SG_ENABLE, pta, sizeof(*pta)); - if (ret < 0) { - wl1271_warning("failed to set softgemini enable: %d", ret); - goto out; - } - -out: - kfree(pta); - return ret; -} - -int wl1271_acx_sg_cfg(struct wl1271 *wl) -{ - struct acx_bt_wlan_coex_param *param; - struct conf_sg_settings *c = &wl->conf.sg; - int i, ret; - - wl1271_debug(DEBUG_ACX, "acx sg cfg"); - - param = kzalloc(sizeof(*param), GFP_KERNEL); - if (!param) { - ret = -ENOMEM; - goto out; - } - - /* BT-WLAN coext parameters */ - for (i = 0; i < CONF_SG_PARAMS_MAX; i++) - param->params[i] = cpu_to_le32(c->params[i]); - param->param_idx = CONF_SG_PARAMS_ALL; - - ret = wl1271_cmd_configure(wl, ACX_SG_CFG, param, sizeof(*param)); - if (ret < 0) { - wl1271_warning("failed to set sg config: %d", ret); - goto out; - } - -out: - kfree(param); - return ret; -} - -int wl1271_acx_cca_threshold(struct wl1271 *wl) -{ - struct acx_energy_detection *detection; - int ret; - - wl1271_debug(DEBUG_ACX, "acx cca threshold"); - - detection = kzalloc(sizeof(*detection), GFP_KERNEL); - if (!detection) { - ret = -ENOMEM; - goto out; - } - - detection->rx_cca_threshold = cpu_to_le16(wl->conf.rx.rx_cca_threshold); - detection->tx_energy_detection = wl->conf.tx.tx_energy_detection; - - ret = wl1271_cmd_configure(wl, ACX_CCA_THRESHOLD, - detection, sizeof(*detection)); - if (ret < 0) { - wl1271_warning("failed to set cca threshold: %d", ret); - return ret; - } - -out: - kfree(detection); - return ret; -} - -int wl1271_acx_bcn_dtim_options(struct wl1271 *wl) -{ - struct acx_beacon_broadcast *bb; - int ret; - - wl1271_debug(DEBUG_ACX, "acx bcn dtim options"); - - bb = kzalloc(sizeof(*bb), GFP_KERNEL); - if (!bb) { - ret = -ENOMEM; - goto out; - } - - bb->beacon_rx_timeout = cpu_to_le16(wl->conf.conn.beacon_rx_timeout); - bb->broadcast_timeout = cpu_to_le16(wl->conf.conn.broadcast_timeout); - bb->rx_broadcast_in_ps = wl->conf.conn.rx_broadcast_in_ps; - bb->ps_poll_threshold = wl->conf.conn.ps_poll_threshold; - - ret = wl1271_cmd_configure(wl, ACX_BCN_DTIM_OPTIONS, bb, sizeof(*bb)); - if (ret < 0) { - wl1271_warning("failed to set rx config: %d", ret); - goto out; - } - -out: - kfree(bb); - return ret; -} - -int wl1271_acx_aid(struct wl1271 *wl, u16 aid) -{ - struct acx_aid *acx_aid; - int ret; - - wl1271_debug(DEBUG_ACX, "acx aid"); - - acx_aid = kzalloc(sizeof(*acx_aid), GFP_KERNEL); - if (!acx_aid) { - ret = -ENOMEM; - goto out; - } - - acx_aid->aid = cpu_to_le16(aid); - - ret = wl1271_cmd_configure(wl, ACX_AID, acx_aid, sizeof(*acx_aid)); - if (ret < 0) { - wl1271_warning("failed to set aid: %d", ret); - goto out; - } - -out: - kfree(acx_aid); - return ret; -} - -int wl1271_acx_event_mbox_mask(struct wl1271 *wl, u32 event_mask) -{ - struct acx_event_mask *mask; - int ret; - - wl1271_debug(DEBUG_ACX, "acx event mbox mask"); - - mask = kzalloc(sizeof(*mask), GFP_KERNEL); - if (!mask) { - ret = -ENOMEM; - goto out; - } - - /* high event mask is unused */ - mask->high_event_mask = cpu_to_le32(0xffffffff); - mask->event_mask = cpu_to_le32(event_mask); - - ret = wl1271_cmd_configure(wl, ACX_EVENT_MBOX_MASK, - mask, sizeof(*mask)); - if (ret < 0) { - wl1271_warning("failed to set acx_event_mbox_mask: %d", ret); - goto out; - } - -out: - kfree(mask); - return ret; -} - -int wl1271_acx_set_preamble(struct wl1271 *wl, enum acx_preamble_type preamble) -{ - struct acx_preamble *acx; - int ret; - - wl1271_debug(DEBUG_ACX, "acx_set_preamble"); - - acx = kzalloc(sizeof(*acx), GFP_KERNEL); - if (!acx) { - ret = -ENOMEM; - goto out; - } - - acx->preamble = preamble; - - ret = wl1271_cmd_configure(wl, ACX_PREAMBLE_TYPE, acx, sizeof(*acx)); - if (ret < 0) { - wl1271_warning("Setting of preamble failed: %d", ret); - goto out; - } - -out: - kfree(acx); - return ret; -} - -int wl1271_acx_cts_protect(struct wl1271 *wl, - enum acx_ctsprotect_type ctsprotect) -{ - struct acx_ctsprotect *acx; - int ret; - - wl1271_debug(DEBUG_ACX, "acx_set_ctsprotect"); - - acx = kzalloc(sizeof(*acx), GFP_KERNEL); - if (!acx) { - ret = -ENOMEM; - goto out; - } - - acx->ctsprotect = ctsprotect; - - ret = wl1271_cmd_configure(wl, ACX_CTS_PROTECTION, acx, sizeof(*acx)); - if (ret < 0) { - wl1271_warning("Setting of ctsprotect failed: %d", ret); - goto out; - } - -out: - kfree(acx); - return ret; -} - -int wl1271_acx_statistics(struct wl1271 *wl, struct acx_statistics *stats) -{ - int ret; - - wl1271_debug(DEBUG_ACX, "acx statistics"); - - ret = wl1271_cmd_interrogate(wl, ACX_STATISTICS, stats, - sizeof(*stats)); - if (ret < 0) { - wl1271_warning("acx statistics failed: %d", ret); - return -ENOMEM; - } - - return 0; -} - -int wl1271_acx_rate_policies(struct wl1271 *wl) -{ - struct acx_rate_policy *acx; - struct conf_tx_rate_class *c = &wl->conf.tx.rc_conf; - int idx = 0; - int ret = 0; - - wl1271_debug(DEBUG_ACX, "acx rate policies"); - - acx = kzalloc(sizeof(*acx), GFP_KERNEL); - - if (!acx) { - ret = -ENOMEM; - goto out; - } - - /* configure one basic rate class */ - idx = ACX_TX_BASIC_RATE; - acx->rate_class[idx].enabled_rates = cpu_to_le32(wl->basic_rate); - acx->rate_class[idx].short_retry_limit = c->short_retry_limit; - acx->rate_class[idx].long_retry_limit = c->long_retry_limit; - acx->rate_class[idx].aflags = c->aflags; - - /* configure one AP supported rate class */ - idx = ACX_TX_AP_FULL_RATE; - acx->rate_class[idx].enabled_rates = cpu_to_le32(wl->rate_set); - acx->rate_class[idx].short_retry_limit = c->short_retry_limit; - acx->rate_class[idx].long_retry_limit = c->long_retry_limit; - acx->rate_class[idx].aflags = c->aflags; - - acx->rate_class_cnt = cpu_to_le32(ACX_TX_RATE_POLICY_CNT); - - ret = wl1271_cmd_configure(wl, ACX_RATE_POLICY, acx, sizeof(*acx)); - if (ret < 0) { - wl1271_warning("Setting of rate policies failed: %d", ret); - goto out; - } - -out: - kfree(acx); - return ret; -} - -int wl1271_acx_ac_cfg(struct wl1271 *wl, u8 ac, u8 cw_min, u16 cw_max, - u8 aifsn, u16 txop) -{ - struct acx_ac_cfg *acx; - int ret = 0; - - wl1271_debug(DEBUG_ACX, "acx ac cfg %d cw_ming %d cw_max %d " - "aifs %d txop %d", ac, cw_min, cw_max, aifsn, txop); - - acx = kzalloc(sizeof(*acx), GFP_KERNEL); - - if (!acx) { - ret = -ENOMEM; - goto out; - } - - acx->ac = ac; - acx->cw_min = cw_min; - acx->cw_max = cpu_to_le16(cw_max); - acx->aifsn = aifsn; - acx->tx_op_limit = cpu_to_le16(txop); - - ret = wl1271_cmd_configure(wl, ACX_AC_CFG, acx, sizeof(*acx)); - if (ret < 0) { - wl1271_warning("acx ac cfg failed: %d", ret); - goto out; - } - -out: - kfree(acx); - return ret; -} - -int wl1271_acx_tid_cfg(struct wl1271 *wl, u8 queue_id, u8 channel_type, - u8 tsid, u8 ps_scheme, u8 ack_policy, - u32 apsd_conf0, u32 apsd_conf1) -{ - struct acx_tid_config *acx; - int ret = 0; - - wl1271_debug(DEBUG_ACX, "acx tid config"); - - acx = kzalloc(sizeof(*acx), GFP_KERNEL); - - if (!acx) { - ret = -ENOMEM; - goto out; - } - - acx->queue_id = queue_id; - acx->channel_type = channel_type; - acx->tsid = tsid; - acx->ps_scheme = ps_scheme; - acx->ack_policy = ack_policy; - acx->apsd_conf[0] = cpu_to_le32(apsd_conf0); - acx->apsd_conf[1] = cpu_to_le32(apsd_conf1); - - ret = wl1271_cmd_configure(wl, ACX_TID_CFG, acx, sizeof(*acx)); - if (ret < 0) { - wl1271_warning("Setting of tid config failed: %d", ret); - goto out; - } - -out: - kfree(acx); - return ret; -} - -int wl1271_acx_frag_threshold(struct wl1271 *wl) -{ - struct acx_frag_threshold *acx; - int ret = 0; - - wl1271_debug(DEBUG_ACX, "acx frag threshold"); - - acx = kzalloc(sizeof(*acx), GFP_KERNEL); - - if (!acx) { - ret = -ENOMEM; - goto out; - } - - acx->frag_threshold = cpu_to_le16(wl->conf.tx.frag_threshold); - ret = wl1271_cmd_configure(wl, ACX_FRAG_CFG, acx, sizeof(*acx)); - if (ret < 0) { - wl1271_warning("Setting of frag threshold failed: %d", ret); - goto out; - } - -out: - kfree(acx); - return ret; -} - -int wl1271_acx_tx_config_options(struct wl1271 *wl) -{ - struct acx_tx_config_options *acx; - int ret = 0; - - wl1271_debug(DEBUG_ACX, "acx tx config options"); - - acx = kzalloc(sizeof(*acx), GFP_KERNEL); - - if (!acx) { - ret = -ENOMEM; - goto out; - } - - acx->tx_compl_timeout = cpu_to_le16(wl->conf.tx.tx_compl_timeout); - acx->tx_compl_threshold = cpu_to_le16(wl->conf.tx.tx_compl_threshold); - ret = wl1271_cmd_configure(wl, ACX_TX_CONFIG_OPT, acx, sizeof(*acx)); - if (ret < 0) { - wl1271_warning("Setting of tx options failed: %d", ret); - goto out; - } - -out: - kfree(acx); - return ret; -} - -int wl1271_acx_mem_cfg(struct wl1271 *wl) -{ - struct wl1271_acx_config_memory *mem_conf; - int ret; - - wl1271_debug(DEBUG_ACX, "wl1271 mem cfg"); - - mem_conf = kzalloc(sizeof(*mem_conf), GFP_KERNEL); - if (!mem_conf) { - ret = -ENOMEM; - goto out; - } - - /* memory config */ - mem_conf->num_stations = DEFAULT_NUM_STATIONS; - mem_conf->rx_mem_block_num = ACX_RX_MEM_BLOCKS; - mem_conf->tx_min_mem_block_num = ACX_TX_MIN_MEM_BLOCKS; - mem_conf->num_ssid_profiles = ACX_NUM_SSID_PROFILES; - mem_conf->total_tx_descriptors = cpu_to_le32(ACX_TX_DESCRIPTORS); - - ret = wl1271_cmd_configure(wl, ACX_MEM_CFG, mem_conf, - sizeof(*mem_conf)); - if (ret < 0) { - wl1271_warning("wl1271 mem config failed: %d", ret); - goto out; - } - -out: - kfree(mem_conf); - return ret; -} - -int wl1271_acx_init_mem_config(struct wl1271 *wl) -{ - int ret; - - ret = wl1271_acx_mem_cfg(wl); - if (ret < 0) - return ret; - - wl->target_mem_map = kzalloc(sizeof(struct wl1271_acx_mem_map), - GFP_KERNEL); - if (!wl->target_mem_map) { - wl1271_error("couldn't allocate target memory map"); - return -ENOMEM; - } - - /* we now ask for the firmware built memory map */ - ret = wl1271_acx_mem_map(wl, (void *)wl->target_mem_map, - sizeof(struct wl1271_acx_mem_map)); - if (ret < 0) { - wl1271_error("couldn't retrieve firmware memory map"); - kfree(wl->target_mem_map); - wl->target_mem_map = NULL; - return ret; - } - - /* initialize TX block book keeping */ - wl->tx_blocks_available = - le32_to_cpu(wl->target_mem_map->num_tx_mem_blocks); - wl1271_debug(DEBUG_TX, "available tx blocks: %d", - wl->tx_blocks_available); - - return 0; -} - -int wl1271_acx_init_rx_interrupt(struct wl1271 *wl) -{ - struct wl1271_acx_rx_config_opt *rx_conf; - int ret; - - wl1271_debug(DEBUG_ACX, "wl1271 rx interrupt config"); - - rx_conf = kzalloc(sizeof(*rx_conf), GFP_KERNEL); - if (!rx_conf) { - ret = -ENOMEM; - goto out; - } - - rx_conf->threshold = cpu_to_le16(wl->conf.rx.irq_pkt_threshold); - rx_conf->timeout = cpu_to_le16(wl->conf.rx.irq_timeout); - rx_conf->mblk_threshold = cpu_to_le16(wl->conf.rx.irq_blk_threshold); - rx_conf->queue_type = wl->conf.rx.queue_type; - - ret = wl1271_cmd_configure(wl, ACX_RX_CONFIG_OPT, rx_conf, - sizeof(*rx_conf)); - if (ret < 0) { - wl1271_warning("wl1271 rx config opt failed: %d", ret); - goto out; - } - -out: - kfree(rx_conf); - return ret; -} - -int wl1271_acx_bet_enable(struct wl1271 *wl, bool enable) -{ - struct wl1271_acx_bet_enable *acx = NULL; - int ret = 0; - - wl1271_debug(DEBUG_ACX, "acx bet enable"); - - if (enable && wl->conf.conn.bet_enable == CONF_BET_MODE_DISABLE) - goto out; - - acx = kzalloc(sizeof(*acx), GFP_KERNEL); - if (!acx) { - ret = -ENOMEM; - goto out; - } - - acx->enable = enable ? CONF_BET_MODE_ENABLE : CONF_BET_MODE_DISABLE; - acx->max_consecutive = wl->conf.conn.bet_max_consecutive; - - ret = wl1271_cmd_configure(wl, ACX_BET_ENABLE, acx, sizeof(*acx)); - if (ret < 0) { - wl1271_warning("acx bet enable failed: %d", ret); - goto out; - } - -out: - kfree(acx); - return ret; -} - -int wl1271_acx_arp_ip_filter(struct wl1271 *wl, bool enable, __be32 address) -{ - struct wl1271_acx_arp_filter *acx; - int ret; - - wl1271_debug(DEBUG_ACX, "acx arp ip filter, enable: %d", enable); - - acx = kzalloc(sizeof(*acx), GFP_KERNEL); - if (!acx) { - ret = -ENOMEM; - goto out; - } - - acx->version = ACX_IPV4_VERSION; - acx->enable = enable; - - if (enable == true) - memcpy(acx->address, &address, ACX_IPV4_ADDR_SIZE); - - ret = wl1271_cmd_configure(wl, ACX_ARP_IP_FILTER, - acx, sizeof(*acx)); - if (ret < 0) { - wl1271_warning("failed to set arp ip filter: %d", ret); - goto out; - } - -out: - kfree(acx); - return ret; -} - -int wl1271_acx_pm_config(struct wl1271 *wl) -{ - struct wl1271_acx_pm_config *acx = NULL; - struct conf_pm_config_settings *c = &wl->conf.pm_config; - int ret = 0; - - wl1271_debug(DEBUG_ACX, "acx pm config"); - - acx = kzalloc(sizeof(*acx), GFP_KERNEL); - if (!acx) { - ret = -ENOMEM; - goto out; - } - - acx->host_clk_settling_time = cpu_to_le32(c->host_clk_settling_time); - acx->host_fast_wakeup_support = c->host_fast_wakeup_support; - - ret = wl1271_cmd_configure(wl, ACX_PM_CONFIG, acx, sizeof(*acx)); - if (ret < 0) { - wl1271_warning("acx pm config failed: %d", ret); - goto out; - } - -out: - kfree(acx); - return ret; -} - -int wl1271_acx_keep_alive_mode(struct wl1271 *wl, bool enable) -{ - struct wl1271_acx_keep_alive_mode *acx = NULL; - int ret = 0; - - wl1271_debug(DEBUG_ACX, "acx keep alive mode: %d", enable); - - acx = kzalloc(sizeof(*acx), GFP_KERNEL); - if (!acx) { - ret = -ENOMEM; - goto out; - } - - acx->enabled = enable; - - ret = wl1271_cmd_configure(wl, ACX_KEEP_ALIVE_MODE, acx, sizeof(*acx)); - if (ret < 0) { - wl1271_warning("acx keep alive mode failed: %d", ret); - goto out; - } - -out: - kfree(acx); - return ret; -} - -int wl1271_acx_keep_alive_config(struct wl1271 *wl, u8 index, u8 tpl_valid) -{ - struct wl1271_acx_keep_alive_config *acx = NULL; - int ret = 0; - - wl1271_debug(DEBUG_ACX, "acx keep alive config"); - - acx = kzalloc(sizeof(*acx), GFP_KERNEL); - if (!acx) { - ret = -ENOMEM; - goto out; - } - - acx->period = cpu_to_le32(wl->conf.conn.keep_alive_interval); - acx->index = index; - acx->tpl_validation = tpl_valid; - acx->trigger = ACX_KEEP_ALIVE_NO_TX; - - ret = wl1271_cmd_configure(wl, ACX_SET_KEEP_ALIVE_CONFIG, - acx, sizeof(*acx)); - if (ret < 0) { - wl1271_warning("acx keep alive config failed: %d", ret); - goto out; - } - -out: - kfree(acx); - return ret; -} - -int wl1271_acx_rssi_snr_trigger(struct wl1271 *wl, bool enable, - s16 thold, u8 hyst) -{ - struct wl1271_acx_rssi_snr_trigger *acx = NULL; - int ret = 0; - - wl1271_debug(DEBUG_ACX, "acx rssi snr trigger"); - - acx = kzalloc(sizeof(*acx), GFP_KERNEL); - if (!acx) { - ret = -ENOMEM; - goto out; - } - - wl->last_rssi_event = -1; - - acx->pacing = cpu_to_le16(wl->conf.roam_trigger.trigger_pacing); - acx->metric = WL1271_ACX_TRIG_METRIC_RSSI_BEACON; - acx->type = WL1271_ACX_TRIG_TYPE_EDGE; - if (enable) - acx->enable = WL1271_ACX_TRIG_ENABLE; - else - acx->enable = WL1271_ACX_TRIG_DISABLE; - - acx->index = WL1271_ACX_TRIG_IDX_RSSI; - acx->dir = WL1271_ACX_TRIG_DIR_BIDIR; - acx->threshold = cpu_to_le16(thold); - acx->hysteresis = hyst; - - ret = wl1271_cmd_configure(wl, ACX_RSSI_SNR_TRIGGER, acx, sizeof(*acx)); - if (ret < 0) { - wl1271_warning("acx rssi snr trigger setting failed: %d", ret); - goto out; - } - -out: - kfree(acx); - return ret; -} - -int wl1271_acx_rssi_snr_avg_weights(struct wl1271 *wl) -{ - struct wl1271_acx_rssi_snr_avg_weights *acx = NULL; - struct conf_roam_trigger_settings *c = &wl->conf.roam_trigger; - int ret = 0; - - wl1271_debug(DEBUG_ACX, "acx rssi snr avg weights"); - - acx = kzalloc(sizeof(*acx), GFP_KERNEL); - if (!acx) { - ret = -ENOMEM; - goto out; - } - - acx->rssi_beacon = c->avg_weight_rssi_beacon; - acx->rssi_data = c->avg_weight_rssi_data; - acx->snr_beacon = c->avg_weight_snr_beacon; - acx->snr_data = c->avg_weight_snr_data; - - ret = wl1271_cmd_configure(wl, ACX_RSSI_SNR_WEIGHTS, acx, sizeof(*acx)); - if (ret < 0) { - wl1271_warning("acx rssi snr trigger weights failed: %d", ret); - goto out; - } - -out: - kfree(acx); - return ret; -} - -int wl1271_acx_set_ht_capabilities(struct wl1271 *wl, - struct ieee80211_sta_ht_cap *ht_cap, - bool allow_ht_operation) -{ - struct wl1271_acx_ht_capabilities *acx; - u8 mac_address[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; - int ret = 0; - - wl1271_debug(DEBUG_ACX, "acx ht capabilities setting"); - - acx = kzalloc(sizeof(*acx), GFP_KERNEL); - if (!acx) { - ret = -ENOMEM; - goto out; - } - - /* Allow HT Operation ? */ - if (allow_ht_operation) { - acx->ht_capabilites = - WL1271_ACX_FW_CAP_HT_OPERATION; - if (ht_cap->cap & IEEE80211_HT_CAP_GRN_FLD) - acx->ht_capabilites |= - WL1271_ACX_FW_CAP_GREENFIELD_FRAME_FORMAT; - if (ht_cap->cap & IEEE80211_HT_CAP_SGI_20) - acx->ht_capabilites |= - WL1271_ACX_FW_CAP_SHORT_GI_FOR_20MHZ_PACKETS; - if (ht_cap->cap & IEEE80211_HT_CAP_LSIG_TXOP_PROT) - acx->ht_capabilites |= - WL1271_ACX_FW_CAP_LSIG_TXOP_PROTECTION; - - /* get data from A-MPDU parameters field */ - acx->ampdu_max_length = ht_cap->ampdu_factor; - acx->ampdu_min_spacing = ht_cap->ampdu_density; - - memcpy(acx->mac_address, mac_address, ETH_ALEN); - } else { /* HT operations are not allowed */ - acx->ht_capabilites = 0; - } - - ret = wl1271_cmd_configure(wl, ACX_PEER_HT_CAP, acx, sizeof(*acx)); - if (ret < 0) { - wl1271_warning("acx ht capabilities setting failed: %d", ret); - goto out; - } - -out: - kfree(acx); - return ret; -} - -int wl1271_acx_set_ht_information(struct wl1271 *wl, - u16 ht_operation_mode) -{ - struct wl1271_acx_ht_information *acx; - int ret = 0; - - wl1271_debug(DEBUG_ACX, "acx ht information setting"); - - acx = kzalloc(sizeof(*acx), GFP_KERNEL); - if (!acx) { - ret = -ENOMEM; - goto out; - } - - acx->ht_protection = - (u8)(ht_operation_mode & IEEE80211_HT_OP_MODE_PROTECTION); - acx->rifs_mode = 0; - acx->gf_protection = 0; - acx->ht_tx_burst_limit = 0; - acx->dual_cts_protection = 0; - - ret = wl1271_cmd_configure(wl, ACX_HT_BSS_OPERATION, acx, sizeof(*acx)); - - if (ret < 0) { - wl1271_warning("acx ht information setting failed: %d", ret); - goto out; - } - -out: - kfree(acx); - return ret; -} - -int wl1271_acx_tsf_info(struct wl1271 *wl, u64 *mactime) -{ - struct wl1271_acx_fw_tsf_information *tsf_info; - int ret; - - tsf_info = kzalloc(sizeof(*tsf_info), GFP_KERNEL); - if (!tsf_info) { - ret = -ENOMEM; - goto out; - } - - ret = wl1271_cmd_interrogate(wl, ACX_TSF_INFO, - tsf_info, sizeof(*tsf_info)); - if (ret < 0) { - wl1271_warning("acx tsf info interrogate failed"); - goto out; - } - - *mactime = le32_to_cpu(tsf_info->current_tsf_low) | - ((u64) le32_to_cpu(tsf_info->current_tsf_high) << 32); - -out: - kfree(tsf_info); - return ret; -} diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.h b/drivers/net/wireless/wl12xx/wl1271_acx.h deleted file mode 100644 index b7c490845f3..00000000000 --- a/drivers/net/wireless/wl12xx/wl1271_acx.h +++ /dev/null @@ -1,1185 +0,0 @@ -/* - * This file is part of wl1271 - * - * Copyright (C) 1998-2009 Texas Instruments. All rights reserved. - * Copyright (C) 2008-2010 Nokia Corporation - * - * Contact: Luciano Coelho - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __WL1271_ACX_H__ -#define __WL1271_ACX_H__ - -#include "wl1271.h" -#include "wl1271_cmd.h" - -/************************************************************************* - - Host Interrupt Register (WiLink -> Host) - -**************************************************************************/ -/* HW Initiated interrupt Watchdog timer expiration */ -#define WL1271_ACX_INTR_WATCHDOG BIT(0) -/* Init sequence is done (masked interrupt, detection through polling only ) */ -#define WL1271_ACX_INTR_INIT_COMPLETE BIT(1) -/* Event was entered to Event MBOX #A*/ -#define WL1271_ACX_INTR_EVENT_A BIT(2) -/* Event was entered to Event MBOX #B*/ -#define WL1271_ACX_INTR_EVENT_B BIT(3) -/* Command processing completion*/ -#define WL1271_ACX_INTR_CMD_COMPLETE BIT(4) -/* Signaling the host on HW wakeup */ -#define WL1271_ACX_INTR_HW_AVAILABLE BIT(5) -/* The MISC bit is used for aggregation of RX, TxComplete and TX rate update */ -#define WL1271_ACX_INTR_DATA BIT(6) -/* Trace meassge on MBOX #A */ -#define WL1271_ACX_INTR_TRACE_A BIT(7) -/* Trace meassge on MBOX #B */ -#define WL1271_ACX_INTR_TRACE_B BIT(8) - -#define WL1271_ACX_INTR_ALL 0xFFFFFFFF -#define WL1271_ACX_ALL_EVENTS_VECTOR (WL1271_ACX_INTR_WATCHDOG | \ - WL1271_ACX_INTR_INIT_COMPLETE | \ - WL1271_ACX_INTR_EVENT_A | \ - WL1271_ACX_INTR_EVENT_B | \ - WL1271_ACX_INTR_CMD_COMPLETE | \ - WL1271_ACX_INTR_HW_AVAILABLE | \ - WL1271_ACX_INTR_DATA) - -#define WL1271_INTR_MASK (WL1271_ACX_INTR_WATCHDOG | \ - WL1271_ACX_INTR_EVENT_A | \ - WL1271_ACX_INTR_EVENT_B | \ - WL1271_ACX_INTR_HW_AVAILABLE | \ - WL1271_ACX_INTR_DATA) - -/* Target's information element */ -struct acx_header { - struct wl1271_cmd_header cmd; - - /* acx (or information element) header */ - __le16 id; - - /* payload length (not including headers */ - __le16 len; -} __packed; - -struct acx_error_counter { - struct acx_header header; - - /* The number of PLCP errors since the last time this */ - /* information element was interrogated. This field is */ - /* automatically cleared when it is interrogated.*/ - __le32 PLCP_error; - - /* The number of FCS errors since the last time this */ - /* information element was interrogated. This field is */ - /* automatically cleared when it is interrogated.*/ - __le32 FCS_error; - - /* The number of MPDUs without PLCP header errors received*/ - /* since the last time this information element was interrogated. */ - /* This field is automatically cleared when it is interrogated.*/ - __le32 valid_frame; - - /* the number of missed sequence numbers in the squentially */ - /* values of frames seq numbers */ - __le32 seq_num_miss; -} __packed; - -enum wl1271_psm_mode { - /* Active mode */ - WL1271_PSM_CAM = 0, - - /* Power save mode */ - WL1271_PSM_PS = 1, - - /* Extreme low power */ - WL1271_PSM_ELP = 2, -}; - -struct acx_sleep_auth { - struct acx_header header; - - /* The sleep level authorization of the device. */ - /* 0 - Always active*/ - /* 1 - Power down mode: light / fast sleep*/ - /* 2 - ELP mode: Deep / Max sleep*/ - u8 sleep_auth; - u8 padding[3]; -} __packed; - -enum { - HOSTIF_PCI_MASTER_HOST_INDIRECT, - HOSTIF_PCI_MASTER_HOST_DIRECT, - HOSTIF_SLAVE, - HOSTIF_PKT_RING, - HOSTIF_DONTCARE = 0xFF -}; - -#define DEFAULT_UCAST_PRIORITY 0 -#define DEFAULT_RX_Q_PRIORITY 0 -#define DEFAULT_NUM_STATIONS 1 -#define DEFAULT_RXQ_PRIORITY 0 /* low 0 .. 15 high */ -#define DEFAULT_RXQ_TYPE 0x07 /* All frames, Data/Ctrl/Mgmt */ -#define TRACE_BUFFER_MAX_SIZE 256 - -#define DP_RX_PACKET_RING_CHUNK_SIZE 1600 -#define DP_TX_PACKET_RING_CHUNK_SIZE 1600 -#define DP_RX_PACKET_RING_CHUNK_NUM 2 -#define DP_TX_PACKET_RING_CHUNK_NUM 2 -#define DP_TX_COMPLETE_TIME_OUT 20 - -#define TX_MSDU_LIFETIME_MIN 0 -#define TX_MSDU_LIFETIME_MAX 3000 -#define TX_MSDU_LIFETIME_DEF 512 -#define RX_MSDU_LIFETIME_MIN 0 -#define RX_MSDU_LIFETIME_MAX 0xFFFFFFFF -#define RX_MSDU_LIFETIME_DEF 512000 - -struct acx_rx_msdu_lifetime { - struct acx_header header; - - /* - * The maximum amount of time, in TU, before the - * firmware discards the MSDU. - */ - __le32 lifetime; -} __packed; - -/* - * RX Config Options Table - * Bit Definition - * === ========== - * 31:14 Reserved - * 13 Copy RX Status - when set, write three receive status words - * to top of rx'd MPDUs. - * When cleared, do not write three status words (added rev 1.5) - * 12 Reserved - * 11 RX Complete upon FCS error - when set, give rx complete - * interrupt for FCS errors, after the rx filtering, e.g. unicast - * frames not to us with FCS error will not generate an interrupt. - * 10 SSID Filter Enable - When set, the WiLink discards all beacon, - * probe request, and probe response frames with an SSID that does - * not match the SSID specified by the host in the START/JOIN - * command. - * When clear, the WiLink receives frames with any SSID. - * 9 Broadcast Filter Enable - When set, the WiLink discards all - * broadcast frames. When clear, the WiLink receives all received - * broadcast frames. - * 8:6 Reserved - * 5 BSSID Filter Enable - When set, the WiLink discards any frames - * with a BSSID that does not match the BSSID specified by the - * host. - * When clear, the WiLink receives frames from any BSSID. - * 4 MAC Addr Filter - When set, the WiLink discards any frames - * with a destination address that does not match the MAC address - * of the adaptor. - * When clear, the WiLink receives frames destined to any MAC - * address. - * 3 Promiscuous - When set, the WiLink receives all valid frames - * (i.e., all frames that pass the FCS check). - * When clear, only frames that pass the other filters specified - * are received. - * 2 FCS - When set, the WiLink includes the FCS with the received - * frame. - * When cleared, the FCS is discarded. - * 1 PLCP header - When set, write all data from baseband to frame - * buffer including PHY header. - * 0 Reserved - Always equal to 0. - * - * RX Filter Options Table - * Bit Definition - * === ========== - * 31:12 Reserved - Always equal to 0. - * 11 Association - When set, the WiLink receives all association - * related frames (association request/response, reassocation - * request/response, and disassociation). When clear, these frames - * are discarded. - * 10 Auth/De auth - When set, the WiLink receives all authentication - * and de-authentication frames. When clear, these frames are - * discarded. - * 9 Beacon - When set, the WiLink receives all beacon frames. - * When clear, these frames are discarded. - * 8 Contention Free - When set, the WiLink receives all contention - * free frames. - * When clear, these frames are discarded. - * 7 Control - When set, the WiLink receives all control frames. - * When clear, these frames are discarded. - * 6 Data - When set, the WiLink receives all data frames. - * When clear, these frames are discarded. - * 5 FCS Error - When set, the WiLink receives frames that have FCS - * errors. - * When clear, these frames are discarded. - * 4 Management - When set, the WiLink receives all management - * frames. - * When clear, these frames are discarded. - * 3 Probe Request - When set, the WiLink receives all probe request - * frames. - * When clear, these frames are discarded. - * 2 Probe Response - When set, the WiLink receives all probe - * response frames. - * When clear, these frames are discarded. - * 1 RTS/CTS/ACK - When set, the WiLink receives all RTS, CTS and ACK - * frames. - * When clear, these frames are discarded. - * 0 Rsvd Type/Sub Type - When set, the WiLink receives all frames - * that have reserved frame types and sub types as defined by the - * 802.11 specification. - * When clear, these frames are discarded. - */ -struct acx_rx_config { - struct acx_header header; - - __le32 config_options; - __le32 filter_options; -} __packed; - -struct acx_packet_detection { - struct acx_header header; - - __le32 threshold; -} __packed; - - -enum acx_slot_type { - SLOT_TIME_LONG = 0, - SLOT_TIME_SHORT = 1, - DEFAULT_SLOT_TIME = SLOT_TIME_SHORT, - MAX_SLOT_TIMES = 0xFF -}; - -#define STATION_WONE_INDEX 0 - -struct acx_slot { - struct acx_header header; - - u8 wone_index; /* Reserved */ - u8 slot_time; - u8 reserved[6]; -} __packed; - - -#define ACX_MC_ADDRESS_GROUP_MAX (8) -#define ADDRESS_GROUP_MAX_LEN (ETH_ALEN * ACX_MC_ADDRESS_GROUP_MAX) - -struct acx_dot11_grp_addr_tbl { - struct acx_header header; - - u8 enabled; - u8 num_groups; - u8 pad[2]; - u8 mac_table[ADDRESS_GROUP_MAX_LEN]; -} __packed; - -struct acx_rx_timeout { - struct acx_header header; - - __le16 ps_poll_timeout; - __le16 upsd_timeout; -} __packed; - -struct acx_rts_threshold { - struct acx_header header; - - __le16 threshold; - u8 pad[2]; -} __packed; - -struct acx_beacon_filter_option { - struct acx_header header; - - u8 enable; - - /* - * The number of beacons without the unicast TIM - * bit set that the firmware buffers before - * signaling the host about ready frames. - * When set to 0 and the filter is enabled, beacons - * without the unicast TIM bit set are dropped. - */ - u8 max_num_beacons; - u8 pad[2]; -} __packed; - -/* - * ACXBeaconFilterEntry (not 221) - * Byte Offset Size (Bytes) Definition - * =========== ============ ========== - * 0 1 IE identifier - * 1 1 Treatment bit mask - * - * ACXBeaconFilterEntry (221) - * Byte Offset Size (Bytes) Definition - * =========== ============ ========== - * 0 1 IE identifier - * 1 1 Treatment bit mask - * 2 3 OUI - * 5 1 Type - * 6 2 Version - * - * - * Treatment bit mask - The information element handling: - * bit 0 - The information element is compared and transferred - * in case of change. - * bit 1 - The information element is transferred to the host - * with each appearance or disappearance. - * Note that both bits can be set at the same time. - */ -#define BEACON_FILTER_TABLE_MAX_IE_NUM (32) -#define BEACON_FILTER_TABLE_MAX_VENDOR_SPECIFIC_IE_NUM (6) -#define BEACON_FILTER_TABLE_IE_ENTRY_SIZE (2) -#define BEACON_FILTER_TABLE_EXTRA_VENDOR_SPECIFIC_IE_SIZE (6) -#define BEACON_FILTER_TABLE_MAX_SIZE ((BEACON_FILTER_TABLE_MAX_IE_NUM * \ - BEACON_FILTER_TABLE_IE_ENTRY_SIZE) + \ - (BEACON_FILTER_TABLE_MAX_VENDOR_SPECIFIC_IE_NUM * \ - BEACON_FILTER_TABLE_EXTRA_VENDOR_SPECIFIC_IE_SIZE)) - -struct acx_beacon_filter_ie_table { - struct acx_header header; - - u8 num_ie; - u8 pad[3]; - u8 table[BEACON_FILTER_TABLE_MAX_SIZE]; -} __packed; - -struct acx_conn_monit_params { - struct acx_header header; - - __le32 synch_fail_thold; /* number of beacons missed */ - __le32 bss_lose_timeout; /* number of TU's from synch fail */ -} __packed; - -struct acx_bt_wlan_coex { - struct acx_header header; - - u8 enable; - u8 pad[3]; -} __packed; - -struct acx_bt_wlan_coex_param { - struct acx_header header; - - __le32 params[CONF_SG_PARAMS_MAX]; - u8 param_idx; - u8 padding[3]; -} __packed; - -struct acx_dco_itrim_params { - struct acx_header header; - - u8 enable; - u8 padding[3]; - __le32 timeout; -} __packed; - -struct acx_energy_detection { - struct acx_header header; - - /* The RX Clear Channel Assessment threshold in the PHY */ - __le16 rx_cca_threshold; - u8 tx_energy_detection; - u8 pad; -} __packed; - -struct acx_beacon_broadcast { - struct acx_header header; - - __le16 beacon_rx_timeout; - __le16 broadcast_timeout; - - /* Enables receiving of broadcast packets in PS mode */ - u8 rx_broadcast_in_ps; - - /* Consecutive PS Poll failures before updating the host */ - u8 ps_poll_threshold; - u8 pad[2]; -} __packed; - -struct acx_event_mask { - struct acx_header header; - - __le32 event_mask; - __le32 high_event_mask; /* Unused */ -} __packed; - -#define CFG_RX_FCS BIT(2) -#define CFG_RX_ALL_GOOD BIT(3) -#define CFG_UNI_FILTER_EN BIT(4) -#define CFG_BSSID_FILTER_EN BIT(5) -#define CFG_MC_FILTER_EN BIT(6) -#define CFG_MC_ADDR0_EN BIT(7) -#define CFG_MC_ADDR1_EN BIT(8) -#define CFG_BC_REJECT_EN BIT(9) -#define CFG_SSID_FILTER_EN BIT(10) -#define CFG_RX_INT_FCS_ERROR BIT(11) -#define CFG_RX_INT_ENCRYPTED BIT(12) -#define CFG_RX_WR_RX_STATUS BIT(13) -#define CFG_RX_FILTER_NULTI BIT(14) -#define CFG_RX_RESERVE BIT(15) -#define CFG_RX_TIMESTAMP_TSF BIT(16) - -#define CFG_RX_RSV_EN BIT(0) -#define CFG_RX_RCTS_ACK BIT(1) -#define CFG_RX_PRSP_EN BIT(2) -#define CFG_RX_PREQ_EN BIT(3) -#define CFG_RX_MGMT_EN BIT(4) -#define CFG_RX_FCS_ERROR BIT(5) -#define CFG_RX_DATA_EN BIT(6) -#define CFG_RX_CTL_EN BIT(7) -#define CFG_RX_CF_EN BIT(8) -#define CFG_RX_BCN_EN BIT(9) -#define CFG_RX_AUTH_EN BIT(10) -#define CFG_RX_ASSOC_EN BIT(11) - -#define SCAN_PASSIVE BIT(0) -#define SCAN_5GHZ_BAND BIT(1) -#define SCAN_TRIGGERED BIT(2) -#define SCAN_PRIORITY_HIGH BIT(3) - -/* When set, disable HW encryption */ -#define DF_ENCRYPTION_DISABLE 0x01 -#define DF_SNIFF_MODE_ENABLE 0x80 - -struct acx_feature_config { - struct acx_header header; - - __le32 options; - __le32 data_flow_options; -} __packed; - -struct acx_current_tx_power { - struct acx_header header; - - u8 current_tx_power; - u8 padding[3]; -} __packed; - -struct acx_wake_up_condition { - struct acx_header header; - - u8 wake_up_event; /* Only one bit can be set */ - u8 listen_interval; - u8 pad[2]; -} __packed; - -struct acx_aid { - struct acx_header header; - - /* - * To be set when associated with an AP. - */ - __le16 aid; - u8 pad[2]; -} __packed; - -enum acx_preamble_type { - ACX_PREAMBLE_LONG = 0, - ACX_PREAMBLE_SHORT = 1 -}; - -struct acx_preamble { - struct acx_header header; - - /* - * When set, the WiLink transmits the frames with a short preamble and - * when cleared, the WiLink transmits the frames with a long preamble. - */ - u8 preamble; - u8 padding[3]; -} __packed; - -enum acx_ctsprotect_type { - CTSPROTECT_DISABLE = 0, - CTSPROTECT_ENABLE = 1 -}; - -struct acx_ctsprotect { - struct acx_header header; - u8 ctsprotect; - u8 padding[3]; -} __packed; - -struct acx_tx_statistics { - __le32 internal_desc_overflow; -} __packed; - -struct acx_rx_statistics { - __le32 out_of_mem; - __le32 hdr_overflow; - __le32 hw_stuck; - __le32 dropped; - __le32 fcs_err; - __le32 xfr_hint_trig; - __le32 path_reset; - __le32 reset_counter; -} __packed; - -struct acx_dma_statistics { - __le32 rx_requested; - __le32 rx_errors; - __le32 tx_requested; - __le32 tx_errors; -} __packed; - -struct acx_isr_statistics { - /* host command complete */ - __le32 cmd_cmplt; - - /* fiqisr() */ - __le32 fiqs; - - /* (INT_STS_ND & INT_TRIG_RX_HEADER) */ - __le32 rx_headers; - - /* (INT_STS_ND & INT_TRIG_RX_CMPLT) */ - __le32 rx_completes; - - /* (INT_STS_ND & INT_TRIG_NO_RX_BUF) */ - __le32 rx_mem_overflow; - - /* (INT_STS_ND & INT_TRIG_S_RX_RDY) */ - __le32 rx_rdys; - - /* irqisr() */ - __le32 irqs; - - /* (INT_STS_ND & INT_TRIG_TX_PROC) */ - __le32 tx_procs; - - /* (INT_STS_ND & INT_TRIG_DECRYPT_DONE) */ - __le32 decrypt_done; - - /* (INT_STS_ND & INT_TRIG_DMA0) */ - __le32 dma0_done; - - /* (INT_STS_ND & INT_TRIG_DMA1) */ - __le32 dma1_done; - - /* (INT_STS_ND & INT_TRIG_TX_EXC_CMPLT) */ - __le32 tx_exch_complete; - - /* (INT_STS_ND & INT_TRIG_COMMAND) */ - __le32 commands; - - /* (INT_STS_ND & INT_TRIG_RX_PROC) */ - __le32 rx_procs; - - /* (INT_STS_ND & INT_TRIG_PM_802) */ - __le32 hw_pm_mode_changes; - - /* (INT_STS_ND & INT_TRIG_ACKNOWLEDGE) */ - __le32 host_acknowledges; - - /* (INT_STS_ND & INT_TRIG_PM_PCI) */ - __le32 pci_pm; - - /* (INT_STS_ND & INT_TRIG_ACM_WAKEUP) */ - __le32 wakeups; - - /* (INT_STS_ND & INT_TRIG_LOW_RSSI) */ - __le32 low_rssi; -} __packed; - -struct acx_wep_statistics { - /* WEP address keys configured */ - __le32 addr_key_count; - - /* default keys configured */ - __le32 default_key_count; - - __le32 reserved; - - /* number of times that WEP key not found on lookup */ - __le32 key_not_found; - - /* number of times that WEP key decryption failed */ - __le32 decrypt_fail; - - /* WEP packets decrypted */ - __le32 packets; - - /* WEP decrypt interrupts */ - __le32 interrupt; -} __packed; - -#define ACX_MISSED_BEACONS_SPREAD 10 - -struct acx_pwr_statistics { - /* the amount of enters into power save mode (both PD & ELP) */ - __le32 ps_enter; - - /* the amount of enters into ELP mode */ - __le32 elp_enter; - - /* the amount of missing beacon interrupts to the host */ - __le32 missing_bcns; - - /* the amount of wake on host-access times */ - __le32 wake_on_host; - - /* the amount of wake on timer-expire */ - __le32 wake_on_timer_exp; - - /* the number of packets that were transmitted with PS bit set */ - __le32 tx_with_ps; - - /* the number of packets that were transmitted with PS bit clear */ - __le32 tx_without_ps; - - /* the number of received beacons */ - __le32 rcvd_beacons; - - /* the number of entering into PowerOn (power save off) */ - __le32 power_save_off; - - /* the number of entries into power save mode */ - __le16 enable_ps; - - /* - * the number of exits from power save, not including failed PS - * transitions - */ - __le16 disable_ps; - - /* - * the number of times the TSF counter was adjusted because - * of drift - */ - __le32 fix_tsf_ps; - - /* Gives statistics about the spread continuous missed beacons. - * The 16 LSB are dedicated for the PS mode. - * The 16 MSB are dedicated for the PS mode. - * cont_miss_bcns_spread[0] - single missed beacon. - * cont_miss_bcns_spread[1] - two continuous missed beacons. - * cont_miss_bcns_spread[2] - three continuous missed beacons. - * ... - * cont_miss_bcns_spread[9] - ten and more continuous missed beacons. - */ - __le32 cont_miss_bcns_spread[ACX_MISSED_BEACONS_SPREAD]; - - /* the number of beacons in awake mode */ - __le32 rcvd_awake_beacons; -} __packed; - -struct acx_mic_statistics { - __le32 rx_pkts; - __le32 calc_failure; -} __packed; - -struct acx_aes_statistics { - __le32 encrypt_fail; - __le32 decrypt_fail; - __le32 encrypt_packets; - __le32 decrypt_packets; - __le32 encrypt_interrupt; - __le32 decrypt_interrupt; -} __packed; - -struct acx_event_statistics { - __le32 heart_beat; - __le32 calibration; - __le32 rx_mismatch; - __le32 rx_mem_empty; - __le32 rx_pool; - __le32 oom_late; - __le32 phy_transmit_error; - __le32 tx_stuck; -} __packed; - -struct acx_ps_statistics { - __le32 pspoll_timeouts; - __le32 upsd_timeouts; - __le32 upsd_max_sptime; - __le32 upsd_max_apturn; - __le32 pspoll_max_apturn; - __le32 pspoll_utilization; - __le32 upsd_utilization; -} __packed; - -struct acx_rxpipe_statistics { - __le32 rx_prep_beacon_drop; - __le32 descr_host_int_trig_rx_data; - __le32 beacon_buffer_thres_host_int_trig_rx_data; - __le32 missed_beacon_host_int_trig_rx_data; - __le32 tx_xfr_host_int_trig_rx_data; -} __packed; - -struct acx_statistics { - struct acx_header header; - - struct acx_tx_statistics tx; - struct acx_rx_statistics rx; - struct acx_dma_statistics dma; - struct acx_isr_statistics isr; - struct acx_wep_statistics wep; - struct acx_pwr_statistics pwr; - struct acx_aes_statistics aes; - struct acx_mic_statistics mic; - struct acx_event_statistics event; - struct acx_ps_statistics ps; - struct acx_rxpipe_statistics rxpipe; -} __packed; - -struct acx_rate_class { - __le32 enabled_rates; - u8 short_retry_limit; - u8 long_retry_limit; - u8 aflags; - u8 reserved; -}; - -#define ACX_TX_BASIC_RATE 0 -#define ACX_TX_AP_FULL_RATE 1 -#define ACX_TX_RATE_POLICY_CNT 2 -struct acx_rate_policy { - struct acx_header header; - - __le32 rate_class_cnt; - struct acx_rate_class rate_class[CONF_TX_MAX_RATE_CLASSES]; -} __packed; - -struct acx_ac_cfg { - struct acx_header header; - u8 ac; - u8 cw_min; - __le16 cw_max; - u8 aifsn; - u8 reserved; - __le16 tx_op_limit; -} __packed; - -struct acx_tid_config { - struct acx_header header; - u8 queue_id; - u8 channel_type; - u8 tsid; - u8 ps_scheme; - u8 ack_policy; - u8 padding[3]; - __le32 apsd_conf[2]; -} __packed; - -struct acx_frag_threshold { - struct acx_header header; - __le16 frag_threshold; - u8 padding[2]; -} __packed; - -struct acx_tx_config_options { - struct acx_header header; - __le16 tx_compl_timeout; /* msec */ - __le16 tx_compl_threshold; /* number of packets */ -} __packed; - -#define ACX_RX_MEM_BLOCKS 70 -#define ACX_TX_MIN_MEM_BLOCKS 40 -#define ACX_TX_DESCRIPTORS 32 -#define ACX_NUM_SSID_PROFILES 1 - -struct wl1271_acx_config_memory { - struct acx_header header; - - u8 rx_mem_block_num; - u8 tx_min_mem_block_num; - u8 num_stations; - u8 num_ssid_profiles; - __le32 total_tx_descriptors; -} __packed; - -struct wl1271_acx_mem_map { - struct acx_header header; - - __le32 code_start; - __le32 code_end; - - __le32 wep_defkey_start; - __le32 wep_defkey_end; - - __le32 sta_table_start; - __le32 sta_table_end; - - __le32 packet_template_start; - __le32 packet_template_end; - - /* Address of the TX result interface (control block) */ - __le32 tx_result; - __le32 tx_result_queue_start; - - __le32 queue_memory_start; - __le32 queue_memory_end; - - __le32 packet_memory_pool_start; - __le32 packet_memory_pool_end; - - __le32 debug_buffer1_start; - __le32 debug_buffer1_end; - - __le32 debug_buffer2_start; - __le32 debug_buffer2_end; - - /* Number of blocks FW allocated for TX packets */ - __le32 num_tx_mem_blocks; - - /* Number of blocks FW allocated for RX packets */ - __le32 num_rx_mem_blocks; - - /* the following 4 fields are valid in SLAVE mode only */ - u8 *tx_cbuf; - u8 *rx_cbuf; - __le32 rx_ctrl; - __le32 tx_ctrl; -} __packed; - -struct wl1271_acx_rx_config_opt { - struct acx_header header; - - __le16 mblk_threshold; - __le16 threshold; - __le16 timeout; - u8 queue_type; - u8 reserved; -} __packed; - - -struct wl1271_acx_bet_enable { - struct acx_header header; - - u8 enable; - u8 max_consecutive; - u8 padding[2]; -} __packed; - -#define ACX_IPV4_VERSION 4 -#define ACX_IPV6_VERSION 6 -#define ACX_IPV4_ADDR_SIZE 4 -struct wl1271_acx_arp_filter { - struct acx_header header; - u8 version; /* ACX_IPV4_VERSION, ACX_IPV6_VERSION */ - u8 enable; /* 1 to enable ARP filtering, 0 to disable */ - u8 padding[2]; - u8 address[16]; /* The configured device IP address - all ARP - requests directed to this IP address will pass - through. For IPv4, the first four bytes are - used. */ -} __packed; - -struct wl1271_acx_pm_config { - struct acx_header header; - - __le32 host_clk_settling_time; - u8 host_fast_wakeup_support; - u8 padding[3]; -} __packed; - -struct wl1271_acx_keep_alive_mode { - struct acx_header header; - - u8 enabled; - u8 padding[3]; -} __packed; - -enum { - ACX_KEEP_ALIVE_NO_TX = 0, - ACX_KEEP_ALIVE_PERIOD_ONLY -}; - -enum { - ACX_KEEP_ALIVE_TPL_INVALID = 0, - ACX_KEEP_ALIVE_TPL_VALID -}; - -struct wl1271_acx_keep_alive_config { - struct acx_header header; - - __le32 period; - u8 index; - u8 tpl_validation; - u8 trigger; - u8 padding; -} __packed; - -enum { - WL1271_ACX_TRIG_TYPE_LEVEL = 0, - WL1271_ACX_TRIG_TYPE_EDGE, -}; - -enum { - WL1271_ACX_TRIG_DIR_LOW = 0, - WL1271_ACX_TRIG_DIR_HIGH, - WL1271_ACX_TRIG_DIR_BIDIR, -}; - -enum { - WL1271_ACX_TRIG_ENABLE = 1, - WL1271_ACX_TRIG_DISABLE, -}; - -enum { - WL1271_ACX_TRIG_METRIC_RSSI_BEACON = 0, - WL1271_ACX_TRIG_METRIC_RSSI_DATA, - WL1271_ACX_TRIG_METRIC_SNR_BEACON, - WL1271_ACX_TRIG_METRIC_SNR_DATA, -}; - -enum { - WL1271_ACX_TRIG_IDX_RSSI = 0, - WL1271_ACX_TRIG_COUNT = 8, -}; - -struct wl1271_acx_rssi_snr_trigger { - struct acx_header header; - - __le16 threshold; - __le16 pacing; /* 0 - 60000 ms */ - u8 metric; - u8 type; - u8 dir; - u8 hysteresis; - u8 index; - u8 enable; - u8 padding[2]; -}; - -struct wl1271_acx_rssi_snr_avg_weights { - struct acx_header header; - - u8 rssi_beacon; - u8 rssi_data; - u8 snr_beacon; - u8 snr_data; -}; - -/* - * ACX_PEER_HT_CAP - * Configure HT capabilities - declare the capabilities of the peer - * we are connected to. - */ -struct wl1271_acx_ht_capabilities { - struct acx_header header; - - /* - * bit 0 - Allow HT Operation - * bit 1 - Allow Greenfield format in TX - * bit 2 - Allow Short GI in TX - * bit 3 - Allow L-SIG TXOP Protection in TX - * bit 4 - Allow HT Control fields in TX. - * Note, driver will still leave space for HT control in packets - * regardless of the value of this field. FW will be responsible - * to drop the HT field from any frame when this Bit set to 0. - * bit 5 - Allow RD initiation in TXOP. FW is allowed to initate RD. - * Exact policy setting for this feature is TBD. - * Note, this bit can only be set to 1 if bit 3 is set to 1. - */ - __le32 ht_capabilites; - - /* - * Indicates to which peer these capabilities apply. - * For infrastructure use ff:ff:ff:ff:ff:ff that indicates relevance - * for all peers. - * Only valid for IBSS/DLS operation. - */ - u8 mac_address[ETH_ALEN]; - - /* - * This the maximum A-MPDU length supported by the AP. The FW may not - * exceed this length when sending A-MPDUs - */ - u8 ampdu_max_length; - - /* This is the minimal spacing required when sending A-MPDUs to the AP*/ - u8 ampdu_min_spacing; -} __packed; - -/* HT Capabilites Fw Bit Mask Mapping */ -#define WL1271_ACX_FW_CAP_HT_OPERATION BIT(0) -#define WL1271_ACX_FW_CAP_GREENFIELD_FRAME_FORMAT BIT(1) -#define WL1271_ACX_FW_CAP_SHORT_GI_FOR_20MHZ_PACKETS BIT(2) -#define WL1271_ACX_FW_CAP_LSIG_TXOP_PROTECTION BIT(3) -#define WL1271_ACX_FW_CAP_HT_CONTROL_FIELDS BIT(4) -#define WL1271_ACX_FW_CAP_RD_INITIATION BIT(5) - - -/* - * ACX_HT_BSS_OPERATION - * Configure HT capabilities - AP rules for behavior in the BSS. - */ -struct wl1271_acx_ht_information { - struct acx_header header; - - /* Values: 0 - RIFS not allowed, 1 - RIFS allowed */ - u8 rifs_mode; - - /* Values: 0 - 3 like in spec */ - u8 ht_protection; - - /* Values: 0 - GF protection not required, 1 - GF protection required */ - u8 gf_protection; - - /*Values: 0 - TX Burst limit not required, 1 - TX Burst Limit required*/ - u8 ht_tx_burst_limit; - - /* - * Values: 0 - Dual CTS protection not required, - * 1 - Dual CTS Protection required - * Note: When this value is set to 1 FW will protect all TXOP with RTS - * frame and will not use CTS-to-self regardless of the value of the - * ACX_CTS_PROTECTION information element - */ - u8 dual_cts_protection; - - u8 padding[3]; -} __packed; - -struct wl1271_acx_fw_tsf_information { - struct acx_header header; - - __le32 current_tsf_high; - __le32 current_tsf_low; - __le32 last_bttt_high; - __le32 last_tbtt_low; - u8 last_dtim_count; - u8 padding[3]; -} __packed; - -enum { - ACX_WAKE_UP_CONDITIONS = 0x0002, - ACX_MEM_CFG = 0x0003, - ACX_SLOT = 0x0004, - ACX_AC_CFG = 0x0007, - ACX_MEM_MAP = 0x0008, - ACX_AID = 0x000A, - /* ACX_FW_REV is missing in the ref driver, but seems to work */ - ACX_FW_REV = 0x000D, - ACX_MEDIUM_USAGE = 0x000F, - ACX_RX_CFG = 0x0010, - ACX_TX_QUEUE_CFG = 0x0011, /* FIXME: only used by wl1251 */ - ACX_STATISTICS = 0x0013, /* Debug API */ - ACX_PWR_CONSUMPTION_STATISTICS = 0x0014, - ACX_FEATURE_CFG = 0x0015, - ACX_TID_CFG = 0x001A, - ACX_PS_RX_STREAMING = 0x001B, - ACX_BEACON_FILTER_OPT = 0x001F, - ACX_NOISE_HIST = 0x0021, - ACX_HDK_VERSION = 0x0022, /* ??? */ - ACX_PD_THRESHOLD = 0x0023, - ACX_TX_CONFIG_OPT = 0x0024, - ACX_CCA_THRESHOLD = 0x0025, - ACX_EVENT_MBOX_MASK = 0x0026, - ACX_CONN_MONIT_PARAMS = 0x002D, - ACX_CONS_TX_FAILURE = 0x002F, - ACX_BCN_DTIM_OPTIONS = 0x0031, - ACX_SG_ENABLE = 0x0032, - ACX_SG_CFG = 0x0033, - ACX_BEACON_FILTER_TABLE = 0x0038, - ACX_ARP_IP_FILTER = 0x0039, - ACX_ROAMING_STATISTICS_TBL = 0x003B, - ACX_RATE_POLICY = 0x003D, - ACX_CTS_PROTECTION = 0x003E, - ACX_SLEEP_AUTH = 0x003F, - ACX_PREAMBLE_TYPE = 0x0040, - ACX_ERROR_CNT = 0x0041, - ACX_IBSS_FILTER = 0x0044, - ACX_SERVICE_PERIOD_TIMEOUT = 0x0045, - ACX_TSF_INFO = 0x0046, - ACX_CONFIG_PS_WMM = 0x0049, - ACX_ENABLE_RX_DATA_FILTER = 0x004A, - ACX_SET_RX_DATA_FILTER = 0x004B, - ACX_GET_DATA_FILTER_STATISTICS = 0x004C, - ACX_RX_CONFIG_OPT = 0x004E, - ACX_FRAG_CFG = 0x004F, - ACX_BET_ENABLE = 0x0050, - ACX_RSSI_SNR_TRIGGER = 0x0051, - ACX_RSSI_SNR_WEIGHTS = 0x0052, - ACX_KEEP_ALIVE_MODE = 0x0053, - ACX_SET_KEEP_ALIVE_CONFIG = 0x0054, - ACX_BA_SESSION_RESPONDER_POLICY = 0x0055, - ACX_BA_SESSION_INITIATOR_POLICY = 0x0056, - ACX_PEER_HT_CAP = 0x0057, - ACX_HT_BSS_OPERATION = 0x0058, - ACX_COEX_ACTIVITY = 0x0059, - ACX_SET_DCO_ITRIM_PARAMS = 0x0061, - DOT11_RX_MSDU_LIFE_TIME = 0x1004, - DOT11_CUR_TX_PWR = 0x100D, - DOT11_RX_DOT11_MODE = 0x1012, - DOT11_RTS_THRESHOLD = 0x1013, - DOT11_GROUP_ADDRESS_TBL = 0x1014, - ACX_PM_CONFIG = 0x1016, - - MAX_DOT11_IE = DOT11_GROUP_ADDRESS_TBL, - - MAX_IE = 0xFFFF -}; - - -int wl1271_acx_wake_up_conditions(struct wl1271 *wl); -int wl1271_acx_sleep_auth(struct wl1271 *wl, u8 sleep_auth); -int wl1271_acx_tx_power(struct wl1271 *wl, int power); -int wl1271_acx_feature_cfg(struct wl1271 *wl); -int wl1271_acx_mem_map(struct wl1271 *wl, - struct acx_header *mem_map, size_t len); -int wl1271_acx_rx_msdu_life_time(struct wl1271 *wl); -int wl1271_acx_rx_config(struct wl1271 *wl, u32 config, u32 filter); -int wl1271_acx_pd_threshold(struct wl1271 *wl); -int wl1271_acx_slot(struct wl1271 *wl, enum acx_slot_type slot_time); -int wl1271_acx_group_address_tbl(struct wl1271 *wl, bool enable, - void *mc_list, u32 mc_list_len); -int wl1271_acx_service_period_timeout(struct wl1271 *wl); -int wl1271_acx_rts_threshold(struct wl1271 *wl, u16 rts_threshold); -int wl1271_acx_dco_itrim_params(struct wl1271 *wl); -int wl1271_acx_beacon_filter_opt(struct wl1271 *wl, bool enable_filter); -int wl1271_acx_beacon_filter_table(struct wl1271 *wl); -int wl1271_acx_conn_monit_params(struct wl1271 *wl, bool enable); -int wl1271_acx_sg_enable(struct wl1271 *wl, bool enable); -int wl1271_acx_sg_cfg(struct wl1271 *wl); -int wl1271_acx_cca_threshold(struct wl1271 *wl); -int wl1271_acx_bcn_dtim_options(struct wl1271 *wl); -int wl1271_acx_aid(struct wl1271 *wl, u16 aid); -int wl1271_acx_event_mbox_mask(struct wl1271 *wl, u32 event_mask); -int wl1271_acx_set_preamble(struct wl1271 *wl, enum acx_preamble_type preamble); -int wl1271_acx_cts_protect(struct wl1271 *wl, - enum acx_ctsprotect_type ctsprotect); -int wl1271_acx_statistics(struct wl1271 *wl, struct acx_statistics *stats); -int wl1271_acx_rate_policies(struct wl1271 *wl); -int wl1271_acx_ac_cfg(struct wl1271 *wl, u8 ac, u8 cw_min, u16 cw_max, - u8 aifsn, u16 txop); -int wl1271_acx_tid_cfg(struct wl1271 *wl, u8 queue_id, u8 channel_type, - u8 tsid, u8 ps_scheme, u8 ack_policy, - u32 apsd_conf0, u32 apsd_conf1); -int wl1271_acx_frag_threshold(struct wl1271 *wl); -int wl1271_acx_tx_config_options(struct wl1271 *wl); -int wl1271_acx_mem_cfg(struct wl1271 *wl); -int wl1271_acx_init_mem_config(struct wl1271 *wl); -int wl1271_acx_init_rx_interrupt(struct wl1271 *wl); -int wl1271_acx_smart_reflex(struct wl1271 *wl); -int wl1271_acx_bet_enable(struct wl1271 *wl, bool enable); -int wl1271_acx_arp_ip_filter(struct wl1271 *wl, bool enable, __be32 address); -int wl1271_acx_pm_config(struct wl1271 *wl); -int wl1271_acx_keep_alive_mode(struct wl1271 *wl, bool enable); -int wl1271_acx_keep_alive_config(struct wl1271 *wl, u8 index, u8 tpl_valid); -int wl1271_acx_rssi_snr_trigger(struct wl1271 *wl, bool enable, - s16 thold, u8 hyst); -int wl1271_acx_rssi_snr_avg_weights(struct wl1271 *wl); -int wl1271_acx_set_ht_capabilities(struct wl1271 *wl, - struct ieee80211_sta_ht_cap *ht_cap, - bool allow_ht_operation); -int wl1271_acx_set_ht_information(struct wl1271 *wl, - u16 ht_operation_mode); -int wl1271_acx_tsf_info(struct wl1271 *wl, u64 *mactime); - -#endif /* __WL1271_ACX_H__ */ diff --git a/drivers/net/wireless/wl12xx/wl1271_boot.c b/drivers/net/wireless/wl12xx/wl1271_boot.c deleted file mode 100644 index 5b190728ca5..00000000000 --- a/drivers/net/wireless/wl12xx/wl1271_boot.c +++ /dev/null @@ -1,591 +0,0 @@ -/* - * This file is part of wl1271 - * - * Copyright (C) 2008-2010 Nokia Corporation - * - * Contact: Luciano Coelho - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include -#include - -#include "wl1271_acx.h" -#include "wl1271_reg.h" -#include "wl1271_boot.h" -#include "wl1271_io.h" -#include "wl1271_event.h" - -static struct wl1271_partition_set part_table[PART_TABLE_LEN] = { - [PART_DOWN] = { - .mem = { - .start = 0x00000000, - .size = 0x000177c0 - }, - .reg = { - .start = REGISTERS_BASE, - .size = 0x00008800 - }, - .mem2 = { - .start = 0x00000000, - .size = 0x00000000 - }, - .mem3 = { - .start = 0x00000000, - .size = 0x00000000 - }, - }, - - [PART_WORK] = { - .mem = { - .start = 0x00040000, - .size = 0x00014fc0 - }, - .reg = { - .start = REGISTERS_BASE, - .size = 0x0000a000 - }, - .mem2 = { - .start = 0x003004f8, - .size = 0x00000004 - }, - .mem3 = { - .start = 0x00040404, - .size = 0x00000000 - }, - }, - - [PART_DRPW] = { - .mem = { - .start = 0x00040000, - .size = 0x00014fc0 - }, - .reg = { - .start = DRPW_BASE, - .size = 0x00006000 - }, - .mem2 = { - .start = 0x00000000, - .size = 0x00000000 - }, - .mem3 = { - .start = 0x00000000, - .size = 0x00000000 - } - } -}; - -static void wl1271_boot_set_ecpu_ctrl(struct wl1271 *wl, u32 flag) -{ - u32 cpu_ctrl; - - /* 10.5.0 run the firmware (I) */ - cpu_ctrl = wl1271_read32(wl, ACX_REG_ECPU_CONTROL); - - /* 10.5.1 run the firmware (II) */ - cpu_ctrl |= flag; - wl1271_write32(wl, ACX_REG_ECPU_CONTROL, cpu_ctrl); -} - -static void wl1271_boot_fw_version(struct wl1271 *wl) -{ - struct wl1271_static_data static_data; - - wl1271_read(wl, wl->cmd_box_addr, &static_data, sizeof(static_data), - false); - - strncpy(wl->chip.fw_ver, static_data.fw_version, - sizeof(wl->chip.fw_ver)); - - /* make sure the string is NULL-terminated */ - wl->chip.fw_ver[sizeof(wl->chip.fw_ver) - 1] = '\0'; -} - -static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf, - size_t fw_data_len, u32 dest) -{ - struct wl1271_partition_set partition; - int addr, chunk_num, partition_limit; - u8 *p, *chunk; - - /* whal_FwCtrl_LoadFwImageSm() */ - - wl1271_debug(DEBUG_BOOT, "starting firmware upload"); - - wl1271_debug(DEBUG_BOOT, "fw_data_len %zd chunk_size %d", - fw_data_len, CHUNK_SIZE); - - if ((fw_data_len % 4) != 0) { - wl1271_error("firmware length not multiple of four"); - return -EIO; - } - - chunk = kmalloc(CHUNK_SIZE, GFP_KERNEL); - if (!chunk) { - wl1271_error("allocation for firmware upload chunk failed"); - return -ENOMEM; - } - - memcpy(&partition, &part_table[PART_DOWN], sizeof(partition)); - partition.mem.start = dest; - wl1271_set_partition(wl, &partition); - - /* 10.1 set partition limit and chunk num */ - chunk_num = 0; - partition_limit = part_table[PART_DOWN].mem.size; - - while (chunk_num < fw_data_len / CHUNK_SIZE) { - /* 10.2 update partition, if needed */ - addr = dest + (chunk_num + 2) * CHUNK_SIZE; - if (addr > partition_limit) { - addr = dest + chunk_num * CHUNK_SIZE; - partition_limit = chunk_num * CHUNK_SIZE + - part_table[PART_DOWN].mem.size; - partition.mem.start = addr; - wl1271_set_partition(wl, &partition); - } - - /* 10.3 upload the chunk */ - addr = dest + chunk_num * CHUNK_SIZE; - p = buf + chunk_num * CHUNK_SIZE; - memcpy(chunk, p, CHUNK_SIZE); - wl1271_debug(DEBUG_BOOT, "uploading fw chunk 0x%p to 0x%x", - p, addr); - wl1271_write(wl, addr, chunk, CHUNK_SIZE, false); - - chunk_num++; - } - - /* 10.4 upload the last chunk */ - addr = dest + chunk_num * CHUNK_SIZE; - p = buf + chunk_num * CHUNK_SIZE; - memcpy(chunk, p, fw_data_len % CHUNK_SIZE); - wl1271_debug(DEBUG_BOOT, "uploading fw last chunk (%zd B) 0x%p to 0x%x", - fw_data_len % CHUNK_SIZE, p, addr); - wl1271_write(wl, addr, chunk, fw_data_len % CHUNK_SIZE, false); - - kfree(chunk); - return 0; -} - -static int wl1271_boot_upload_firmware(struct wl1271 *wl) -{ - u32 chunks, addr, len; - int ret = 0; - u8 *fw; - - fw = wl->fw; - chunks = be32_to_cpup((__be32 *) fw); - fw += sizeof(u32); - - wl1271_debug(DEBUG_BOOT, "firmware chunks to be uploaded: %u", chunks); - - while (chunks--) { - addr = be32_to_cpup((__be32 *) fw); - fw += sizeof(u32); - len = be32_to_cpup((__be32 *) fw); - fw += sizeof(u32); - - if (len > 300000) { - wl1271_info("firmware chunk too long: %u", len); - return -EINVAL; - } - wl1271_debug(DEBUG_BOOT, "chunk %d addr 0x%x len %u", - chunks, addr, len); - ret = wl1271_boot_upload_firmware_chunk(wl, fw, len, addr); - if (ret != 0) - break; - fw += len; - } - - return ret; -} - -static int wl1271_boot_upload_nvs(struct wl1271 *wl) -{ - size_t nvs_len, burst_len; - int i; - u32 dest_addr, val; - u8 *nvs_ptr, *nvs_aligned; - - if (wl->nvs == NULL) - return -ENODEV; - - /* - * FIXME: the LEGACY NVS image support (NVS's missing the 5GHz band - * configurations) can be removed when those NVS files stop floating - * around. - */ - if (wl->nvs_len == sizeof(struct wl1271_nvs_file) || - wl->nvs_len == WL1271_INI_LEGACY_NVS_FILE_SIZE) { - if (wl->nvs->general_params.dual_mode_select) - wl->enable_11a = true; - } - - if (wl->nvs_len != sizeof(struct wl1271_nvs_file) && - (wl->nvs_len != WL1271_INI_LEGACY_NVS_FILE_SIZE || - wl->enable_11a)) { - wl1271_error("nvs size is not as expected: %zu != %zu", - wl->nvs_len, sizeof(struct wl1271_nvs_file)); - kfree(wl->nvs); - wl->nvs = NULL; - wl->nvs_len = 0; - return -EILSEQ; - } - - /* only the first part of the NVS needs to be uploaded */ - nvs_len = sizeof(wl->nvs->nvs); - nvs_ptr = (u8 *)wl->nvs->nvs; - - /* update current MAC address to NVS */ - nvs_ptr[11] = wl->mac_addr[0]; - nvs_ptr[10] = wl->mac_addr[1]; - nvs_ptr[6] = wl->mac_addr[2]; - nvs_ptr[5] = wl->mac_addr[3]; - nvs_ptr[4] = wl->mac_addr[4]; - nvs_ptr[3] = wl->mac_addr[5]; - - /* - * Layout before the actual NVS tables: - * 1 byte : burst length. - * 2 bytes: destination address. - * n bytes: data to burst copy. - * - * This is ended by a 0 length, then the NVS tables. - */ - - /* FIXME: Do we need to check here whether the LSB is 1? */ - while (nvs_ptr[0]) { - burst_len = nvs_ptr[0]; - dest_addr = (nvs_ptr[1] & 0xfe) | ((u32)(nvs_ptr[2] << 8)); - - /* - * Due to our new wl1271_translate_reg_addr function, - * we need to add the REGISTER_BASE to the destination - */ - dest_addr += REGISTERS_BASE; - - /* We move our pointer to the data */ - nvs_ptr += 3; - - for (i = 0; i < burst_len; i++) { - val = (nvs_ptr[0] | (nvs_ptr[1] << 8) - | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24)); - - wl1271_debug(DEBUG_BOOT, - "nvs burst write 0x%x: 0x%x", - dest_addr, val); - wl1271_write32(wl, dest_addr, val); - - nvs_ptr += 4; - dest_addr += 4; - } - } - - /* - * We've reached the first zero length, the first NVS table - * is located at an aligned offset which is at least 7 bytes further. - */ - nvs_ptr = (u8 *)wl->nvs->nvs + - ALIGN(nvs_ptr - (u8 *)wl->nvs->nvs + 7, 4); - nvs_len -= nvs_ptr - (u8 *)wl->nvs->nvs; - - /* Now we must set the partition correctly */ - wl1271_set_partition(wl, &part_table[PART_WORK]); - - /* Copy the NVS tables to a new block to ensure alignment */ - nvs_aligned = kmemdup(nvs_ptr, nvs_len, GFP_KERNEL); - if (!nvs_aligned) - return -ENOMEM; - - /* And finally we upload the NVS tables */ - wl1271_write(wl, CMD_MBOX_ADDRESS, nvs_aligned, nvs_len, false); - - kfree(nvs_aligned); - return 0; -} - -static void wl1271_boot_enable_interrupts(struct wl1271 *wl) -{ - wl1271_enable_interrupts(wl); - wl1271_write32(wl, ACX_REG_INTERRUPT_MASK, - WL1271_ACX_INTR_ALL & ~(WL1271_INTR_MASK)); - wl1271_write32(wl, HI_CFG, HI_CFG_DEF_VAL); -} - -static int wl1271_boot_soft_reset(struct wl1271 *wl) -{ - unsigned long timeout; - u32 boot_data; - - /* perform soft reset */ - wl1271_write32(wl, ACX_REG_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT); - - /* SOFT_RESET is self clearing */ - timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME); - while (1) { - boot_data = wl1271_read32(wl, ACX_REG_SLV_SOFT_RESET); - wl1271_debug(DEBUG_BOOT, "soft reset bootdata 0x%x", boot_data); - if ((boot_data & ACX_SLV_SOFT_RESET_BIT) == 0) - break; - - if (time_after(jiffies, timeout)) { - /* 1.2 check pWhalBus->uSelfClearTime if the - * timeout was reached */ - wl1271_error("soft reset timeout"); - return -1; - } - - udelay(SOFT_RESET_STALL_TIME); - } - - /* disable Rx/Tx */ - wl1271_write32(wl, ENABLE, 0x0); - - /* disable auto calibration on start*/ - wl1271_write32(wl, SPARE_A2, 0xffff); - - return 0; -} - -static int wl1271_boot_run_firmware(struct wl1271 *wl) -{ - int loop, ret; - u32 chip_id, intr; - - wl1271_boot_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT); - - chip_id = wl1271_read32(wl, CHIP_ID_B); - - wl1271_debug(DEBUG_BOOT, "chip id after firmware boot: 0x%x", chip_id); - - if (chip_id != wl->chip.id) { - wl1271_error("chip id doesn't match after firmware boot"); - return -EIO; - } - - /* wait for init to complete */ - loop = 0; - while (loop++ < INIT_LOOP) { - udelay(INIT_LOOP_DELAY); - intr = wl1271_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); - - if (intr == 0xffffffff) { - wl1271_error("error reading hardware complete " - "init indication"); - return -EIO; - } - /* check that ACX_INTR_INIT_COMPLETE is enabled */ - else if (intr & WL1271_ACX_INTR_INIT_COMPLETE) { - wl1271_write32(wl, ACX_REG_INTERRUPT_ACK, - WL1271_ACX_INTR_INIT_COMPLETE); - break; - } - } - - if (loop > INIT_LOOP) { - wl1271_error("timeout waiting for the hardware to " - "complete initialization"); - return -EIO; - } - - /* get hardware config command mail box */ - wl->cmd_box_addr = wl1271_read32(wl, REG_COMMAND_MAILBOX_PTR); - - /* get hardware config event mail box */ - wl->event_box_addr = wl1271_read32(wl, REG_EVENT_MAILBOX_PTR); - - /* set the working partition to its "running" mode offset */ - wl1271_set_partition(wl, &part_table[PART_WORK]); - - wl1271_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x event_box_addr 0x%x", - wl->cmd_box_addr, wl->event_box_addr); - - wl1271_boot_fw_version(wl); - - /* - * in case of full asynchronous mode the firmware event must be - * ready to receive event from the command mailbox - */ - - /* unmask required mbox events */ - wl->event_mask = BSS_LOSE_EVENT_ID | - SCAN_COMPLETE_EVENT_ID | - PS_REPORT_EVENT_ID | - JOIN_EVENT_COMPLETE_ID | - DISCONNECT_EVENT_COMPLETE_ID | - RSSI_SNR_TRIGGER_0_EVENT_ID | - PSPOLL_DELIVERY_FAILURE_EVENT_ID | - SOFT_GEMINI_SENSE_EVENT_ID; - - ret = wl1271_event_unmask(wl); - if (ret < 0) { - wl1271_error("EVENT mask setting failed"); - return ret; - } - - wl1271_event_mbox_config(wl); - - /* firmware startup completed */ - return 0; -} - -static int wl1271_boot_write_irq_polarity(struct wl1271 *wl) -{ - u32 polarity; - - polarity = wl1271_top_reg_read(wl, OCP_REG_POLARITY); - - /* We use HIGH polarity, so unset the LOW bit */ - polarity &= ~POLARITY_LOW; - wl1271_top_reg_write(wl, OCP_REG_POLARITY, polarity); - - return 0; -} - -static void wl1271_boot_hw_version(struct wl1271 *wl) -{ - u32 fuse; - - fuse = wl1271_top_reg_read(wl, REG_FUSE_DATA_2_1); - fuse = (fuse & PG_VER_MASK) >> PG_VER_OFFSET; - - wl->hw_pg_ver = (s8)fuse; -} - -int wl1271_boot(struct wl1271 *wl) -{ - int ret = 0; - u32 tmp, clk, pause; - - wl1271_boot_hw_version(wl); - - if (wl->ref_clock == 0 || wl->ref_clock == 2 || wl->ref_clock == 4) - /* ref clk: 19.2/38.4/38.4-XTAL */ - clk = 0x3; - else if (wl->ref_clock == 1 || wl->ref_clock == 3) - /* ref clk: 26/52 */ - clk = 0x5; - else - return -EINVAL; - - if (wl->ref_clock != 0) { - u16 val; - /* Set clock type (open drain) */ - val = wl1271_top_reg_read(wl, OCP_REG_CLK_TYPE); - val &= FREF_CLK_TYPE_BITS; - wl1271_top_reg_write(wl, OCP_REG_CLK_TYPE, val); - - /* Set clock pull mode (no pull) */ - val = wl1271_top_reg_read(wl, OCP_REG_CLK_PULL); - val |= NO_PULL; - wl1271_top_reg_write(wl, OCP_REG_CLK_PULL, val); - } else { - u16 val; - /* Set clock polarity */ - val = wl1271_top_reg_read(wl, OCP_REG_CLK_POLARITY); - val &= FREF_CLK_POLARITY_BITS; - val |= CLK_REQ_OUTN_SEL; - wl1271_top_reg_write(wl, OCP_REG_CLK_POLARITY, val); - } - - wl1271_write32(wl, PLL_PARAMETERS, clk); - - pause = wl1271_read32(wl, PLL_PARAMETERS); - - wl1271_debug(DEBUG_BOOT, "pause1 0x%x", pause); - - pause &= ~(WU_COUNTER_PAUSE_VAL); - pause |= WU_COUNTER_PAUSE_VAL; - wl1271_write32(wl, WU_COUNTER_PAUSE, pause); - - /* Continue the ELP wake up sequence */ - wl1271_write32(wl, WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL); - udelay(500); - - wl1271_set_partition(wl, &part_table[PART_DRPW]); - - /* Read-modify-write DRPW_SCRATCH_START register (see next state) - to be used by DRPw FW. The RTRIM value will be added by the FW - before taking DRPw out of reset */ - - wl1271_debug(DEBUG_BOOT, "DRPW_SCRATCH_START %08x", DRPW_SCRATCH_START); - clk = wl1271_read32(wl, DRPW_SCRATCH_START); - - wl1271_debug(DEBUG_BOOT, "clk2 0x%x", clk); - - clk |= (wl->ref_clock << 1) << 4; - wl1271_write32(wl, DRPW_SCRATCH_START, clk); - - wl1271_set_partition(wl, &part_table[PART_WORK]); - - /* Disable interrupts */ - wl1271_write32(wl, ACX_REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL); - - ret = wl1271_boot_soft_reset(wl); - if (ret < 0) - goto out; - - /* 2. start processing NVS file */ - ret = wl1271_boot_upload_nvs(wl); - if (ret < 0) - goto out; - - /* write firmware's last address (ie. it's length) to - * ACX_EEPROMLESS_IND_REG */ - wl1271_debug(DEBUG_BOOT, "ACX_EEPROMLESS_IND_REG"); - - wl1271_write32(wl, ACX_EEPROMLESS_IND_REG, ACX_EEPROMLESS_IND_REG); - - tmp = wl1271_read32(wl, CHIP_ID_B); - - wl1271_debug(DEBUG_BOOT, "chip id 0x%x", tmp); - - /* 6. read the EEPROM parameters */ - tmp = wl1271_read32(wl, SCR_PAD2); - - ret = wl1271_boot_write_irq_polarity(wl); - if (ret < 0) - goto out; - - wl1271_write32(wl, ACX_REG_INTERRUPT_MASK, - WL1271_ACX_ALL_EVENTS_VECTOR); - - /* WL1271: The reference driver skips steps 7 to 10 (jumps directly - * to upload_fw) */ - - ret = wl1271_boot_upload_firmware(wl); - if (ret < 0) - goto out; - - /* 10.5 start firmware */ - ret = wl1271_boot_run_firmware(wl); - if (ret < 0) - goto out; - - /* Enable firmware interrupts now */ - wl1271_boot_enable_interrupts(wl); - - /* set the wl1271 default filters */ - wl->rx_config = WL1271_DEFAULT_RX_CONFIG; - wl->rx_filter = WL1271_DEFAULT_RX_FILTER; - - wl1271_event_mbox_config(wl); - -out: - return ret; -} diff --git a/drivers/net/wireless/wl12xx/wl1271_boot.h b/drivers/net/wireless/wl12xx/wl1271_boot.h deleted file mode 100644 index f73b0b15a28..00000000000 --- a/drivers/net/wireless/wl12xx/wl1271_boot.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * This file is part of wl1271 - * - * Copyright (C) 2008-2009 Nokia Corporation - * - * Contact: Luciano Coelho - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __BOOT_H__ -#define __BOOT_H__ - -#include "wl1271.h" - -int wl1271_boot(struct wl1271 *wl); - -#define WL1271_NO_SUBBANDS 8 -#define WL1271_NO_POWER_LEVELS 4 -#define WL1271_FW_VERSION_MAX_LEN 20 - -struct wl1271_static_data { - u8 mac_address[ETH_ALEN]; - u8 padding[2]; - u8 fw_version[WL1271_FW_VERSION_MAX_LEN]; - u32 hw_version; - u8 tx_power_table[WL1271_NO_SUBBANDS][WL1271_NO_POWER_LEVELS]; -}; - -/* number of times we try to read the INIT interrupt */ -#define INIT_LOOP 20000 - -/* delay between retries */ -#define INIT_LOOP_DELAY 50 - -#define WU_COUNTER_PAUSE_VAL 0x3FF -#define WELP_ARM_COMMAND_VAL 0x4 - -#define OCP_REG_POLARITY 0x0064 -#define OCP_REG_CLK_TYPE 0x0448 -#define OCP_REG_CLK_POLARITY 0x0cb2 -#define OCP_REG_CLK_PULL 0x0cb4 - -#define REG_FUSE_DATA_2_1 0x050a -#define PG_VER_MASK 0x3c -#define PG_VER_OFFSET 2 - -#define CMD_MBOX_ADDRESS 0x407B4 - -#define POLARITY_LOW BIT(1) -#define NO_PULL (BIT(14) | BIT(15)) - -#define FREF_CLK_TYPE_BITS 0xfffffe7f -#define CLK_REQ_PRCM 0x100 -#define FREF_CLK_POLARITY_BITS 0xfffff8ff -#define CLK_REQ_OUTN_SEL 0x700 - -#endif diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.c b/drivers/net/wireless/wl12xx/wl1271_cmd.c deleted file mode 100644 index 5d3e8485ea4..00000000000 --- a/drivers/net/wireless/wl12xx/wl1271_cmd.c +++ /dev/null @@ -1,783 +0,0 @@ -/* - * This file is part of wl1271 - * - * Copyright (C) 2009-2010 Nokia Corporation - * - * Contact: Luciano Coelho - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include -#include -#include -#include -#include -#include -#include - -#include "wl1271.h" -#include "wl1271_reg.h" -#include "wl1271_io.h" -#include "wl1271_acx.h" -#include "wl12xx_80211.h" -#include "wl1271_cmd.h" -#include "wl1271_event.h" - -#define WL1271_CMD_FAST_POLL_COUNT 50 - -/* - * send command to firmware - * - * @wl: wl struct - * @id: command id - * @buf: buffer containing the command, must work with dma - * @len: length of the buffer - */ -int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len, - size_t res_len) -{ - struct wl1271_cmd_header *cmd; - unsigned long timeout; - u32 intr; - int ret = 0; - u16 status; - u16 poll_count = 0; - - cmd = buf; - cmd->id = cpu_to_le16(id); - cmd->status = 0; - - WARN_ON(len % 4 != 0); - - wl1271_write(wl, wl->cmd_box_addr, buf, len, false); - - wl1271_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD); - - timeout = jiffies + msecs_to_jiffies(WL1271_COMMAND_TIMEOUT); - - intr = wl1271_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); - while (!(intr & WL1271_ACX_INTR_CMD_COMPLETE)) { - if (time_after(jiffies, timeout)) { - wl1271_error("command complete timeout"); - ret = -ETIMEDOUT; - goto out; - } - - poll_count++; - if (poll_count < WL1271_CMD_FAST_POLL_COUNT) - udelay(10); - else - msleep(1); - - intr = wl1271_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); - } - - /* read back the status code of the command */ - if (res_len == 0) - res_len = sizeof(struct wl1271_cmd_header); - wl1271_read(wl, wl->cmd_box_addr, cmd, res_len, false); - - status = le16_to_cpu(cmd->status); - if (status != CMD_STATUS_SUCCESS) { - wl1271_error("command execute failure %d", status); - ieee80211_queue_work(wl->hw, &wl->recovery_work); - ret = -EIO; - } - - wl1271_write32(wl, ACX_REG_INTERRUPT_ACK, - WL1271_ACX_INTR_CMD_COMPLETE); - -out: - return ret; -} - -int wl1271_cmd_general_parms(struct wl1271 *wl) -{ - struct wl1271_general_parms_cmd *gen_parms; - struct wl1271_ini_general_params *gp = &wl->nvs->general_params; - bool answer = false; - int ret; - - if (!wl->nvs) - return -ENODEV; - - gen_parms = kzalloc(sizeof(*gen_parms), GFP_KERNEL); - if (!gen_parms) - return -ENOMEM; - - gen_parms->test.id = TEST_CMD_INI_FILE_GENERAL_PARAM; - - memcpy(&gen_parms->general_params, gp, sizeof(*gp)); - - if (gp->tx_bip_fem_auto_detect) - answer = true; - - ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), answer); - if (ret < 0) { - wl1271_warning("CMD_INI_FILE_GENERAL_PARAM failed"); - goto out; - } - - gp->tx_bip_fem_manufacturer = - gen_parms->general_params.tx_bip_fem_manufacturer; - - wl1271_debug(DEBUG_CMD, "FEM autodetect: %s, manufacturer: %d\n", - answer ? "auto" : "manual", gp->tx_bip_fem_manufacturer); - -out: - kfree(gen_parms); - return ret; -} - -int wl1271_cmd_radio_parms(struct wl1271 *wl) -{ - struct wl1271_radio_parms_cmd *radio_parms; - struct wl1271_ini_general_params *gp = &wl->nvs->general_params; - int ret; - - if (!wl->nvs) - return -ENODEV; - - radio_parms = kzalloc(sizeof(*radio_parms), GFP_KERNEL); - if (!radio_parms) - return -ENOMEM; - - radio_parms->test.id = TEST_CMD_INI_FILE_RADIO_PARAM; - - /* 2.4GHz parameters */ - memcpy(&radio_parms->static_params_2, &wl->nvs->stat_radio_params_2, - sizeof(struct wl1271_ini_band_params_2)); - memcpy(&radio_parms->dyn_params_2, - &wl->nvs->dyn_radio_params_2[gp->tx_bip_fem_manufacturer].params, - sizeof(struct wl1271_ini_fem_params_2)); - - /* 5GHz parameters */ - memcpy(&radio_parms->static_params_5, - &wl->nvs->stat_radio_params_5, - sizeof(struct wl1271_ini_band_params_5)); - memcpy(&radio_parms->dyn_params_5, - &wl->nvs->dyn_radio_params_5[gp->tx_bip_fem_manufacturer].params, - sizeof(struct wl1271_ini_fem_params_5)); - - wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_RADIO_PARAM: ", - radio_parms, sizeof(*radio_parms)); - - ret = wl1271_cmd_test(wl, radio_parms, sizeof(*radio_parms), 0); - if (ret < 0) - wl1271_warning("CMD_INI_FILE_RADIO_PARAM failed"); - - kfree(radio_parms); - return ret; -} - -int wl1271_cmd_ext_radio_parms(struct wl1271 *wl) -{ - struct wl1271_ext_radio_parms_cmd *ext_radio_parms; - struct conf_rf_settings *rf = &wl->conf.rf; - int ret; - - if (!wl->nvs) - return -ENODEV; - - ext_radio_parms = kzalloc(sizeof(*ext_radio_parms), GFP_KERNEL); - if (!ext_radio_parms) - return -ENOMEM; - - ext_radio_parms->test.id = TEST_CMD_INI_FILE_RF_EXTENDED_PARAM; - - memcpy(ext_radio_parms->tx_per_channel_power_compensation_2, - rf->tx_per_channel_power_compensation_2, - CONF_TX_PWR_COMPENSATION_LEN_2); - memcpy(ext_radio_parms->tx_per_channel_power_compensation_5, - rf->tx_per_channel_power_compensation_5, - CONF_TX_PWR_COMPENSATION_LEN_5); - - wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_EXT_RADIO_PARAM: ", - ext_radio_parms, sizeof(*ext_radio_parms)); - - ret = wl1271_cmd_test(wl, ext_radio_parms, sizeof(*ext_radio_parms), 0); - if (ret < 0) - wl1271_warning("TEST_CMD_INI_FILE_RF_EXTENDED_PARAM failed"); - - kfree(ext_radio_parms); - return ret; -} - -/* - * Poll the mailbox event field until any of the bits in the mask is set or a - * timeout occurs (WL1271_EVENT_TIMEOUT in msecs) - */ -static int wl1271_cmd_wait_for_event(struct wl1271 *wl, u32 mask) -{ - u32 events_vector, event; - unsigned long timeout; - - timeout = jiffies + msecs_to_jiffies(WL1271_EVENT_TIMEOUT); - - do { - if (time_after(jiffies, timeout)) { - ieee80211_queue_work(wl->hw, &wl->recovery_work); - return -ETIMEDOUT; - } - - msleep(1); - - /* read from both event fields */ - wl1271_read(wl, wl->mbox_ptr[0], &events_vector, - sizeof(events_vector), false); - event = events_vector & mask; - wl1271_read(wl, wl->mbox_ptr[1], &events_vector, - sizeof(events_vector), false); - event |= events_vector & mask; - } while (!event); - - return 0; -} - -int wl1271_cmd_join(struct wl1271 *wl, u8 bss_type) -{ - struct wl1271_cmd_join *join; - int ret, i; - u8 *bssid; - - join = kzalloc(sizeof(*join), GFP_KERNEL); - if (!join) { - ret = -ENOMEM; - goto out; - } - - wl1271_debug(DEBUG_CMD, "cmd join"); - - /* Reverse order BSSID */ - bssid = (u8 *) &join->bssid_lsb; - for (i = 0; i < ETH_ALEN; i++) - bssid[i] = wl->bssid[ETH_ALEN - i - 1]; - - join->rx_config_options = cpu_to_le32(wl->rx_config); - join->rx_filter_options = cpu_to_le32(wl->rx_filter); - join->bss_type = bss_type; - join->basic_rate_set = cpu_to_le32(wl->basic_rate_set); - - if (wl->band == IEEE80211_BAND_5GHZ) - join->bss_type |= WL1271_JOIN_CMD_BSS_TYPE_5GHZ; - - join->beacon_interval = cpu_to_le16(wl->beacon_int); - join->dtim_interval = WL1271_DEFAULT_DTIM_PERIOD; - - join->channel = wl->channel; - join->ssid_len = wl->ssid_len; - memcpy(join->ssid, wl->ssid, wl->ssid_len); - - join->ctrl |= wl->session_counter << WL1271_JOIN_CMD_TX_SESSION_OFFSET; - - /* reset TX security counters */ - wl->tx_security_last_seq = 0; - wl->tx_security_seq = 0; - - ret = wl1271_cmd_send(wl, CMD_START_JOIN, join, sizeof(*join), 0); - if (ret < 0) { - wl1271_error("failed to initiate cmd join"); - goto out_free; - } - - ret = wl1271_cmd_wait_for_event(wl, JOIN_EVENT_COMPLETE_ID); - if (ret < 0) - wl1271_error("cmd join event completion error"); - -out_free: - kfree(join); - -out: - return ret; -} - -/** - * send test command to firmware - * - * @wl: wl struct - * @buf: buffer containing the command, with all headers, must work with dma - * @len: length of the buffer - * @answer: is answer needed - */ -int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer) -{ - int ret; - size_t res_len = 0; - - wl1271_debug(DEBUG_CMD, "cmd test"); - - if (answer) - res_len = buf_len; - - ret = wl1271_cmd_send(wl, CMD_TEST, buf, buf_len, res_len); - - if (ret < 0) { - wl1271_warning("TEST command failed"); - return ret; - } - - return ret; -} - -/** - * read acx from firmware - * - * @wl: wl struct - * @id: acx id - * @buf: buffer for the response, including all headers, must work with dma - * @len: lenght of buf - */ -int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len) -{ - struct acx_header *acx = buf; - int ret; - - wl1271_debug(DEBUG_CMD, "cmd interrogate"); - - acx->id = cpu_to_le16(id); - - /* payload length, does not include any headers */ - acx->len = cpu_to_le16(len - sizeof(*acx)); - - ret = wl1271_cmd_send(wl, CMD_INTERROGATE, acx, sizeof(*acx), len); - if (ret < 0) - wl1271_error("INTERROGATE command failed"); - - return ret; -} - -/** - * write acx value to firmware - * - * @wl: wl struct - * @id: acx id - * @buf: buffer containing acx, including all headers, must work with dma - * @len: length of buf - */ -int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len) -{ - struct acx_header *acx = buf; - int ret; - - wl1271_debug(DEBUG_CMD, "cmd configure"); - - acx->id = cpu_to_le16(id); - - /* payload length, does not include any headers */ - acx->len = cpu_to_le16(len - sizeof(*acx)); - - ret = wl1271_cmd_send(wl, CMD_CONFIGURE, acx, len, 0); - if (ret < 0) { - wl1271_warning("CONFIGURE command NOK"); - return ret; - } - - return 0; -} - -int wl1271_cmd_data_path(struct wl1271 *wl, bool enable) -{ - struct cmd_enabledisable_path *cmd; - int ret; - u16 cmd_rx, cmd_tx; - - wl1271_debug(DEBUG_CMD, "cmd data path"); - - cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); - if (!cmd) { - ret = -ENOMEM; - goto out; - } - - /* the channel here is only used for calibration, so hardcoded to 1 */ - cmd->channel = 1; - - if (enable) { - cmd_rx = CMD_ENABLE_RX; - cmd_tx = CMD_ENABLE_TX; - } else { - cmd_rx = CMD_DISABLE_RX; - cmd_tx = CMD_DISABLE_TX; - } - - ret = wl1271_cmd_send(wl, cmd_rx, cmd, sizeof(*cmd), 0); - if (ret < 0) { - wl1271_error("rx %s cmd for channel %d failed", - enable ? "start" : "stop", cmd->channel); - goto out; - } - - wl1271_debug(DEBUG_BOOT, "rx %s cmd channel %d", - enable ? "start" : "stop", cmd->channel); - - ret = wl1271_cmd_send(wl, cmd_tx, cmd, sizeof(*cmd), 0); - if (ret < 0) { - wl1271_error("tx %s cmd for channel %d failed", - enable ? "start" : "stop", cmd->channel); - goto out; - } - - wl1271_debug(DEBUG_BOOT, "tx %s cmd channel %d", - enable ? "start" : "stop", cmd->channel); - -out: - kfree(cmd); - return ret; -} - -int wl1271_cmd_ps_mode(struct wl1271 *wl, u8 ps_mode, u32 rates, bool send) -{ - struct wl1271_cmd_ps_params *ps_params = NULL; - int ret = 0; - - wl1271_debug(DEBUG_CMD, "cmd set ps mode"); - - ps_params = kzalloc(sizeof(*ps_params), GFP_KERNEL); - if (!ps_params) { - ret = -ENOMEM; - goto out; - } - - ps_params->ps_mode = ps_mode; - ps_params->send_null_data = send; - ps_params->retries = wl->conf.conn.psm_entry_nullfunc_retries; - ps_params->hang_over_period = wl->conf.conn.psm_entry_hangover_period; - ps_params->null_data_rate = cpu_to_le32(rates); - - ret = wl1271_cmd_send(wl, CMD_SET_PS_MODE, ps_params, - sizeof(*ps_params), 0); - if (ret < 0) { - wl1271_error("cmd set_ps_mode failed"); - goto out; - } - -out: - kfree(ps_params); - return ret; -} - -int wl1271_cmd_template_set(struct wl1271 *wl, u16 template_id, - void *buf, size_t buf_len, int index, u32 rates) -{ - struct wl1271_cmd_template_set *cmd; - int ret = 0; - - wl1271_debug(DEBUG_CMD, "cmd template_set %d", template_id); - - WARN_ON(buf_len > WL1271_CMD_TEMPL_MAX_SIZE); - buf_len = min_t(size_t, buf_len, WL1271_CMD_TEMPL_MAX_SIZE); - - cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); - if (!cmd) { - ret = -ENOMEM; - goto out; - } - - cmd->len = cpu_to_le16(buf_len); - cmd->template_type = template_id; - cmd->enabled_rates = cpu_to_le32(rates); - cmd->short_retry_limit = wl->conf.tx.rc_conf.short_retry_limit; - cmd->long_retry_limit = wl->conf.tx.rc_conf.long_retry_limit; - cmd->index = index; - - if (buf) - memcpy(cmd->template_data, buf, buf_len); - - ret = wl1271_cmd_send(wl, CMD_SET_TEMPLATE, cmd, sizeof(*cmd), 0); - if (ret < 0) { - wl1271_warning("cmd set_template failed: %d", ret); - goto out_free; - } - -out_free: - kfree(cmd); - -out: - return ret; -} - -int wl1271_cmd_build_null_data(struct wl1271 *wl) -{ - struct sk_buff *skb = NULL; - int size; - void *ptr; - int ret = -ENOMEM; - - - if (wl->bss_type == BSS_TYPE_IBSS) { - size = sizeof(struct wl12xx_null_data_template); - ptr = NULL; - } else { - skb = ieee80211_nullfunc_get(wl->hw, wl->vif); - if (!skb) - goto out; - size = skb->len; - ptr = skb->data; - } - - ret = wl1271_cmd_template_set(wl, CMD_TEMPL_NULL_DATA, ptr, size, 0, - wl->basic_rate); - -out: - dev_kfree_skb(skb); - if (ret) - wl1271_warning("cmd buld null data failed %d", ret); - - return ret; - -} - -int wl1271_cmd_build_klv_null_data(struct wl1271 *wl) -{ - struct sk_buff *skb = NULL; - int ret = -ENOMEM; - - skb = ieee80211_nullfunc_get(wl->hw, wl->vif); - if (!skb) - goto out; - - ret = wl1271_cmd_template_set(wl, CMD_TEMPL_KLV, - skb->data, skb->len, - CMD_TEMPL_KLV_IDX_NULL_DATA, - wl->basic_rate); - -out: - dev_kfree_skb(skb); - if (ret) - wl1271_warning("cmd build klv null data failed %d", ret); - - return ret; - -} - -int wl1271_cmd_build_ps_poll(struct wl1271 *wl, u16 aid) -{ - struct sk_buff *skb; - int ret = 0; - - skb = ieee80211_pspoll_get(wl->hw, wl->vif); - if (!skb) - goto out; - - ret = wl1271_cmd_template_set(wl, CMD_TEMPL_PS_POLL, skb->data, - skb->len, 0, wl->basic_rate_set); - -out: - dev_kfree_skb(skb); - return ret; -} - -int wl1271_cmd_build_probe_req(struct wl1271 *wl, - const u8 *ssid, size_t ssid_len, - const u8 *ie, size_t ie_len, u8 band) -{ - struct sk_buff *skb; - int ret; - - skb = ieee80211_probereq_get(wl->hw, wl->vif, ssid, ssid_len, - ie, ie_len); - if (!skb) { - ret = -ENOMEM; - goto out; - } - - wl1271_dump(DEBUG_SCAN, "PROBE REQ: ", skb->data, skb->len); - - if (band == IEEE80211_BAND_2GHZ) - ret = wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_2_4, - skb->data, skb->len, 0, - wl->conf.tx.basic_rate); - else - ret = wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_5, - skb->data, skb->len, 0, - wl->conf.tx.basic_rate_5); - -out: - dev_kfree_skb(skb); - return ret; -} - -int wl1271_build_qos_null_data(struct wl1271 *wl) -{ - struct ieee80211_qos_hdr template; - - memset(&template, 0, sizeof(template)); - - memcpy(template.addr1, wl->bssid, ETH_ALEN); - memcpy(template.addr2, wl->mac_addr, ETH_ALEN); - memcpy(template.addr3, wl->bssid, ETH_ALEN); - - template.frame_control = cpu_to_le16(IEEE80211_FTYPE_DATA | - IEEE80211_STYPE_QOS_NULLFUNC | - IEEE80211_FCTL_TODS); - - /* FIXME: not sure what priority to use here */ - template.qos_ctrl = cpu_to_le16(0); - - return wl1271_cmd_template_set(wl, CMD_TEMPL_QOS_NULL_DATA, &template, - sizeof(template), 0, - wl->basic_rate); -} - -int wl1271_cmd_set_default_wep_key(struct wl1271 *wl, u8 id) -{ - struct wl1271_cmd_set_keys *cmd; - int ret = 0; - - wl1271_debug(DEBUG_CMD, "cmd set_default_wep_key %d", id); - - cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); - if (!cmd) { - ret = -ENOMEM; - goto out; - } - - cmd->id = id; - cmd->key_action = cpu_to_le16(KEY_SET_ID); - cmd->key_type = KEY_WEP; - - ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd), 0); - if (ret < 0) { - wl1271_warning("cmd set_default_wep_key failed: %d", ret); - goto out; - } - -out: - kfree(cmd); - - return ret; -} - -int wl1271_cmd_set_key(struct wl1271 *wl, u16 action, u8 id, u8 key_type, - u8 key_size, const u8 *key, const u8 *addr, - u32 tx_seq_32, u16 tx_seq_16) -{ - struct wl1271_cmd_set_keys *cmd; - int ret = 0; - - cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); - if (!cmd) { - ret = -ENOMEM; - goto out; - } - - if (key_type != KEY_WEP) - memcpy(cmd->addr, addr, ETH_ALEN); - - cmd->key_action = cpu_to_le16(action); - cmd->key_size = key_size; - cmd->key_type = key_type; - - cmd->ac_seq_num16[0] = cpu_to_le16(tx_seq_16); - cmd->ac_seq_num32[0] = cpu_to_le32(tx_seq_32); - - /* we have only one SSID profile */ - cmd->ssid_profile = 0; - - cmd->id = id; - - if (key_type == KEY_TKIP) { - /* - * We get the key in the following form: - * TKIP (16 bytes) - TX MIC (8 bytes) - RX MIC (8 bytes) - * but the target is expecting: - * TKIP - RX MIC - TX MIC - */ - memcpy(cmd->key, key, 16); - memcpy(cmd->key + 16, key + 24, 8); - memcpy(cmd->key + 24, key + 16, 8); - - } else { - memcpy(cmd->key, key, key_size); - } - - wl1271_dump(DEBUG_CRYPT, "TARGET KEY: ", cmd, sizeof(*cmd)); - - ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd), 0); - if (ret < 0) { - wl1271_warning("could not set keys"); - goto out; - } - -out: - kfree(cmd); - - return ret; -} - -int wl1271_cmd_disconnect(struct wl1271 *wl) -{ - struct wl1271_cmd_disconnect *cmd; - int ret = 0; - - wl1271_debug(DEBUG_CMD, "cmd disconnect"); - - cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); - if (!cmd) { - ret = -ENOMEM; - goto out; - } - - cmd->rx_config_options = cpu_to_le32(wl->rx_config); - cmd->rx_filter_options = cpu_to_le32(wl->rx_filter); - /* disconnect reason is not used in immediate disconnections */ - cmd->type = DISCONNECT_IMMEDIATE; - - ret = wl1271_cmd_send(wl, CMD_DISCONNECT, cmd, sizeof(*cmd), 0); - if (ret < 0) { - wl1271_error("failed to send disconnect command"); - goto out_free; - } - - ret = wl1271_cmd_wait_for_event(wl, DISCONNECT_EVENT_COMPLETE_ID); - if (ret < 0) - wl1271_error("cmd disconnect event completion error"); - -out_free: - kfree(cmd); - -out: - return ret; -} - -int wl1271_cmd_set_sta_state(struct wl1271 *wl) -{ - struct wl1271_cmd_set_sta_state *cmd; - int ret = 0; - - wl1271_debug(DEBUG_CMD, "cmd set sta state"); - - cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); - if (!cmd) { - ret = -ENOMEM; - goto out; - } - - cmd->state = WL1271_CMD_STA_STATE_CONNECTED; - - ret = wl1271_cmd_send(wl, CMD_SET_STA_STATE, cmd, sizeof(*cmd), 0); - if (ret < 0) { - wl1271_error("failed to send set STA state command"); - goto out_free; - } - -out_free: - kfree(cmd); - -out: - return ret; -} diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.h b/drivers/net/wireless/wl12xx/wl1271_cmd.h deleted file mode 100644 index a0caf4fc37b..00000000000 --- a/drivers/net/wireless/wl12xx/wl1271_cmd.h +++ /dev/null @@ -1,459 +0,0 @@ -/* - * This file is part of wl1271 - * - * Copyright (C) 1998-2009 Texas Instruments. All rights reserved. - * Copyright (C) 2009 Nokia Corporation - * - * Contact: Luciano Coelho - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __WL1271_CMD_H__ -#define __WL1271_CMD_H__ - -#include "wl1271.h" - -struct acx_header; - -int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len, - size_t res_len); -int wl1271_cmd_general_parms(struct wl1271 *wl); -int wl1271_cmd_radio_parms(struct wl1271 *wl); -int wl1271_cmd_ext_radio_parms(struct wl1271 *wl); -int wl1271_cmd_join(struct wl1271 *wl, u8 bss_type); -int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer); -int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len); -int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len); -int wl1271_cmd_data_path(struct wl1271 *wl, bool enable); -int wl1271_cmd_ps_mode(struct wl1271 *wl, u8 ps_mode, u32 rates, bool send); -int wl1271_cmd_read_memory(struct wl1271 *wl, u32 addr, void *answer, - size_t len); -int wl1271_cmd_template_set(struct wl1271 *wl, u16 template_id, - void *buf, size_t buf_len, int index, u32 rates); -int wl1271_cmd_build_null_data(struct wl1271 *wl); -int wl1271_cmd_build_ps_poll(struct wl1271 *wl, u16 aid); -int wl1271_cmd_build_probe_req(struct wl1271 *wl, - const u8 *ssid, size_t ssid_len, - const u8 *ie, size_t ie_len, u8 band); -int wl1271_build_qos_null_data(struct wl1271 *wl); -int wl1271_cmd_build_klv_null_data(struct wl1271 *wl); -int wl1271_cmd_set_default_wep_key(struct wl1271 *wl, u8 id); -int wl1271_cmd_set_key(struct wl1271 *wl, u16 action, u8 id, u8 key_type, - u8 key_size, const u8 *key, const u8 *addr, - u32 tx_seq_32, u16 tx_seq_16); -int wl1271_cmd_disconnect(struct wl1271 *wl); -int wl1271_cmd_set_sta_state(struct wl1271 *wl); - -enum wl1271_commands { - CMD_INTERROGATE = 1, /*use this to read information elements*/ - CMD_CONFIGURE = 2, /*use this to write information elements*/ - CMD_ENABLE_RX = 3, - CMD_ENABLE_TX = 4, - CMD_DISABLE_RX = 5, - CMD_DISABLE_TX = 6, - CMD_SCAN = 8, - CMD_STOP_SCAN = 9, - CMD_START_JOIN = 11, - CMD_SET_KEYS = 12, - CMD_READ_MEMORY = 13, - CMD_WRITE_MEMORY = 14, - CMD_SET_TEMPLATE = 19, - CMD_TEST = 23, - CMD_NOISE_HIST = 28, - CMD_LNA_CONTROL = 32, - CMD_SET_BCN_MODE = 33, - CMD_MEASUREMENT = 34, - CMD_STOP_MEASUREMENT = 35, - CMD_DISCONNECT = 36, - CMD_SET_PS_MODE = 37, - CMD_CHANNEL_SWITCH = 38, - CMD_STOP_CHANNEL_SWICTH = 39, - CMD_AP_DISCOVERY = 40, - CMD_STOP_AP_DISCOVERY = 41, - CMD_SPS_SCAN = 42, - CMD_STOP_SPS_SCAN = 43, - CMD_HEALTH_CHECK = 45, - CMD_DEBUG = 46, - CMD_TRIGGER_SCAN_TO = 47, - CMD_CONNECTION_SCAN_CFG = 48, - CMD_CONNECTION_SCAN_SSID_CFG = 49, - CMD_START_PERIODIC_SCAN = 50, - CMD_STOP_PERIODIC_SCAN = 51, - CMD_SET_STA_STATE = 52, - - NUM_COMMANDS, - MAX_COMMAND_ID = 0xFFFF, -}; - -#define MAX_CMD_PARAMS 572 - -enum { - CMD_TEMPL_KLV_IDX_NULL_DATA = 0, - CMD_TEMPL_KLV_IDX_MAX = 4 -}; - -enum cmd_templ { - CMD_TEMPL_NULL_DATA = 0, - CMD_TEMPL_BEACON, - CMD_TEMPL_CFG_PROBE_REQ_2_4, - CMD_TEMPL_CFG_PROBE_REQ_5, - CMD_TEMPL_PROBE_RESPONSE, - CMD_TEMPL_QOS_NULL_DATA, - CMD_TEMPL_PS_POLL, - CMD_TEMPL_KLV, - CMD_TEMPL_DISCONNECT, - CMD_TEMPL_PROBE_REQ_2_4, /* for firmware internal use only */ - CMD_TEMPL_PROBE_REQ_5, /* for firmware internal use only */ - CMD_TEMPL_BAR, /* for firmware internal use only */ - CMD_TEMPL_CTS, /* - * For CTS-to-self (FastCTS) mechanism - * for BT/WLAN coexistence (SoftGemini). */ - CMD_TEMPL_MAX = 0xff -}; - -/* unit ms */ -#define WL1271_COMMAND_TIMEOUT 2000 -#define WL1271_CMD_TEMPL_MAX_SIZE 252 -#define WL1271_EVENT_TIMEOUT 750 - -struct wl1271_cmd_header { - __le16 id; - __le16 status; - /* payload */ - u8 data[0]; -} __packed; - -#define WL1271_CMD_MAX_PARAMS 572 - -struct wl1271_command { - struct wl1271_cmd_header header; - u8 parameters[WL1271_CMD_MAX_PARAMS]; -} __packed; - -enum { - CMD_MAILBOX_IDLE = 0, - CMD_STATUS_SUCCESS = 1, - CMD_STATUS_UNKNOWN_CMD = 2, - CMD_STATUS_UNKNOWN_IE = 3, - CMD_STATUS_REJECT_MEAS_SG_ACTIVE = 11, - CMD_STATUS_RX_BUSY = 13, - CMD_STATUS_INVALID_PARAM = 14, - CMD_STATUS_TEMPLATE_TOO_LARGE = 15, - CMD_STATUS_OUT_OF_MEMORY = 16, - CMD_STATUS_STA_TABLE_FULL = 17, - CMD_STATUS_RADIO_ERROR = 18, - CMD_STATUS_WRONG_NESTING = 19, - CMD_STATUS_TIMEOUT = 21, /* Driver internal use.*/ - CMD_STATUS_FW_RESET = 22, /* Driver internal use.*/ - MAX_COMMAND_STATUS = 0xff -}; - -#define CMDMBOX_HEADER_LEN 4 -#define CMDMBOX_INFO_ELEM_HEADER_LEN 4 - -enum { - BSS_TYPE_IBSS = 0, - BSS_TYPE_STA_BSS = 2, - BSS_TYPE_AP_BSS = 3, - MAX_BSS_TYPE = 0xFF -}; - -#define WL1271_JOIN_CMD_CTRL_TX_FLUSH 0x80 /* Firmware flushes all Tx */ -#define WL1271_JOIN_CMD_TX_SESSION_OFFSET 1 -#define WL1271_JOIN_CMD_BSS_TYPE_5GHZ 0x10 - -struct wl1271_cmd_join { - struct wl1271_cmd_header header; - - __le32 bssid_lsb; - __le16 bssid_msb; - __le16 beacon_interval; /* in TBTTs */ - __le32 rx_config_options; - __le32 rx_filter_options; - - /* - * The target uses this field to determine the rate at - * which to transmit control frame responses (such as - * ACK or CTS frames). - */ - __le32 basic_rate_set; - u8 dtim_interval; - /* - * bits 0-2: This bitwise field specifies the type - * of BSS to start or join (BSS_TYPE_*). - * bit 4: Band - The radio band in which to join - * or start. - * 0 - 2.4GHz band - * 1 - 5GHz band - * bits 3, 5-7: Reserved - */ - u8 bss_type; - u8 channel; - u8 ssid_len; - u8 ssid[IW_ESSID_MAX_SIZE]; - u8 ctrl; /* JOIN_CMD_CTRL_* */ - u8 reserved[3]; -} __packed; - -struct cmd_enabledisable_path { - struct wl1271_cmd_header header; - - u8 channel; - u8 padding[3]; -} __packed; - -#define WL1271_RATE_AUTOMATIC 0 - -struct wl1271_cmd_template_set { - struct wl1271_cmd_header header; - - __le16 len; - u8 template_type; - u8 index; /* relevant only for KLV_TEMPLATE type */ - __le32 enabled_rates; - u8 short_retry_limit; - u8 long_retry_limit; - u8 aflags; - u8 reserved; - u8 template_data[WL1271_CMD_TEMPL_MAX_SIZE]; -} __packed; - -#define TIM_ELE_ID 5 -#define PARTIAL_VBM_MAX 251 - -struct wl1271_tim { - u8 identity; - u8 length; - u8 dtim_count; - u8 dtim_period; - u8 bitmap_ctrl; - u8 pvb_field[PARTIAL_VBM_MAX]; /* Partial Virtual Bitmap */ -} __packed; - -enum wl1271_cmd_ps_mode { - STATION_ACTIVE_MODE, - STATION_POWER_SAVE_MODE -}; - -struct wl1271_cmd_ps_params { - struct wl1271_cmd_header header; - - u8 ps_mode; /* STATION_* */ - u8 send_null_data; /* Do we have to send NULL data packet ? */ - u8 retries; /* Number of retires for the initial NULL data packet */ - - /* - * TUs during which the target stays awake after switching - * to power save mode. - */ - u8 hang_over_period; - __le32 null_data_rate; -} __packed; - -/* HW encryption keys */ -#define NUM_ACCESS_CATEGORIES_COPY 4 -#define MAX_KEY_SIZE 32 - -enum wl1271_cmd_key_action { - KEY_ADD_OR_REPLACE = 1, - KEY_REMOVE = 2, - KEY_SET_ID = 3, - MAX_KEY_ACTION = 0xffff, -}; - -enum wl1271_cmd_key_type { - KEY_NONE = 0, - KEY_WEP = 1, - KEY_TKIP = 2, - KEY_AES = 3, - KEY_GEM = 4, -}; - -/* FIXME: Add description for key-types */ - -struct wl1271_cmd_set_keys { - struct wl1271_cmd_header header; - - /* Ignored for default WEP key */ - u8 addr[ETH_ALEN]; - - /* key_action_e */ - __le16 key_action; - - __le16 reserved_1; - - /* key size in bytes */ - u8 key_size; - - /* key_type_e */ - u8 key_type; - u8 ssid_profile; - - /* - * TKIP, AES: frame's key id field. - * For WEP default key: key id; - */ - u8 id; - u8 reserved_2[6]; - u8 key[MAX_KEY_SIZE]; - __le16 ac_seq_num16[NUM_ACCESS_CATEGORIES_COPY]; - __le32 ac_seq_num32[NUM_ACCESS_CATEGORIES_COPY]; -} __packed; - -struct wl1271_cmd_test_header { - u8 id; - u8 padding[3]; -} __packed; - -enum wl1271_channel_tune_bands { - WL1271_CHANNEL_TUNE_BAND_2_4, - WL1271_CHANNEL_TUNE_BAND_5, - WL1271_CHANNEL_TUNE_BAND_4_9 -}; - -#define WL1271_PD_REFERENCE_POINT_BAND_B_G 0 - -#define TEST_CMD_P2G_CAL 0x02 -#define TEST_CMD_CHANNEL_TUNE 0x0d -#define TEST_CMD_UPDATE_PD_REFERENCE_POINT 0x1d -#define TEST_CMD_INI_FILE_RADIO_PARAM 0x19 -#define TEST_CMD_INI_FILE_GENERAL_PARAM 0x1E -#define TEST_CMD_INI_FILE_RF_EXTENDED_PARAM 0x26 - -struct wl1271_general_parms_cmd { - struct wl1271_cmd_header header; - - struct wl1271_cmd_test_header test; - - struct wl1271_ini_general_params general_params; - - u8 sr_debug_table[WL1271_INI_MAX_SMART_REFLEX_PARAM]; - u8 sr_sen_n_p; - u8 sr_sen_n_p_gain; - u8 sr_sen_nrn; - u8 sr_sen_prn; - u8 padding[3]; -} __packed; - -struct wl1271_radio_parms_cmd { - struct wl1271_cmd_header header; - - struct wl1271_cmd_test_header test; - - /* Static radio parameters */ - struct wl1271_ini_band_params_2 static_params_2; - struct wl1271_ini_band_params_5 static_params_5; - - /* Dynamic radio parameters */ - struct wl1271_ini_fem_params_2 dyn_params_2; - u8 padding2; - struct wl1271_ini_fem_params_5 dyn_params_5; - u8 padding3[2]; -} __packed; - -struct wl1271_ext_radio_parms_cmd { - struct wl1271_cmd_header header; - - struct wl1271_cmd_test_header test; - - u8 tx_per_channel_power_compensation_2[CONF_TX_PWR_COMPENSATION_LEN_2]; - u8 tx_per_channel_power_compensation_5[CONF_TX_PWR_COMPENSATION_LEN_5]; - u8 padding[3]; -} __packed; - -struct wl1271_cmd_cal_channel_tune { - struct wl1271_cmd_header header; - - struct wl1271_cmd_test_header test; - - u8 band; - u8 channel; - - __le16 radio_status; -} __packed; - -struct wl1271_cmd_cal_update_ref_point { - struct wl1271_cmd_header header; - - struct wl1271_cmd_test_header test; - - __le32 ref_power; - __le32 ref_detector; - u8 sub_band; - u8 padding[3]; -} __packed; - -#define MAX_TLV_LENGTH 400 -#define MAX_NVS_VERSION_LENGTH 12 - -#define WL1271_CAL_P2G_BAND_B_G BIT(0) - -struct wl1271_cmd_cal_p2g { - struct wl1271_cmd_header header; - - struct wl1271_cmd_test_header test; - - __le16 len; - u8 buf[MAX_TLV_LENGTH]; - u8 type; - u8 padding; - - __le16 radio_status; - u8 nvs_version[MAX_NVS_VERSION_LENGTH]; - - u8 sub_band_mask; - u8 padding2; -} __packed; - - -/* - * There are three types of disconnections: - * - * DISCONNECT_IMMEDIATE: the fw doesn't send any frames - * DISCONNECT_DEAUTH: the fw generates a DEAUTH request with the reason - * we have passed - * DISCONNECT_DISASSOC: the fw generates a DESASSOC request with the reason - * we have passed - */ -enum wl1271_disconnect_type { - DISCONNECT_IMMEDIATE, - DISCONNECT_DEAUTH, - DISCONNECT_DISASSOC -}; - -struct wl1271_cmd_disconnect { - struct wl1271_cmd_header header; - - __le32 rx_config_options; - __le32 rx_filter_options; - - __le16 reason; - u8 type; - - u8 padding; -} __packed; - -#define WL1271_CMD_STA_STATE_CONNECTED 1 - -struct wl1271_cmd_set_sta_state { - struct wl1271_cmd_header header; - - u8 state; - u8 padding[3]; -} __packed; - -#endif /* __WL1271_CMD_H__ */ diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h deleted file mode 100644 index 5f78a6cb143..00000000000 --- a/drivers/net/wireless/wl12xx/wl1271_conf.h +++ /dev/null @@ -1,1105 +0,0 @@ -/* - * This file is part of wl1271 - * - * Copyright (C) 2009 Nokia Corporation - * - * Contact: Luciano Coelho - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __WL1271_CONF_H__ -#define __WL1271_CONF_H__ - -enum { - CONF_HW_BIT_RATE_1MBPS = BIT(0), - CONF_HW_BIT_RATE_2MBPS = BIT(1), - CONF_HW_BIT_RATE_5_5MBPS = BIT(2), - CONF_HW_BIT_RATE_6MBPS = BIT(3), - CONF_HW_BIT_RATE_9MBPS = BIT(4), - CONF_HW_BIT_RATE_11MBPS = BIT(5), - CONF_HW_BIT_RATE_12MBPS = BIT(6), - CONF_HW_BIT_RATE_18MBPS = BIT(7), - CONF_HW_BIT_RATE_22MBPS = BIT(8), - CONF_HW_BIT_RATE_24MBPS = BIT(9), - CONF_HW_BIT_RATE_36MBPS = BIT(10), - CONF_HW_BIT_RATE_48MBPS = BIT(11), - CONF_HW_BIT_RATE_54MBPS = BIT(12), - CONF_HW_BIT_RATE_MCS_0 = BIT(13), - CONF_HW_BIT_RATE_MCS_1 = BIT(14), - CONF_HW_BIT_RATE_MCS_2 = BIT(15), - CONF_HW_BIT_RATE_MCS_3 = BIT(16), - CONF_HW_BIT_RATE_MCS_4 = BIT(17), - CONF_HW_BIT_RATE_MCS_5 = BIT(18), - CONF_HW_BIT_RATE_MCS_6 = BIT(19), - CONF_HW_BIT_RATE_MCS_7 = BIT(20) -}; - -enum { - CONF_HW_RATE_INDEX_1MBPS = 0, - CONF_HW_RATE_INDEX_2MBPS = 1, - CONF_HW_RATE_INDEX_5_5MBPS = 2, - CONF_HW_RATE_INDEX_6MBPS = 3, - CONF_HW_RATE_INDEX_9MBPS = 4, - CONF_HW_RATE_INDEX_11MBPS = 5, - CONF_HW_RATE_INDEX_12MBPS = 6, - CONF_HW_RATE_INDEX_18MBPS = 7, - CONF_HW_RATE_INDEX_22MBPS = 8, - CONF_HW_RATE_INDEX_24MBPS = 9, - CONF_HW_RATE_INDEX_36MBPS = 10, - CONF_HW_RATE_INDEX_48MBPS = 11, - CONF_HW_RATE_INDEX_54MBPS = 12, - CONF_HW_RATE_INDEX_MAX = CONF_HW_RATE_INDEX_54MBPS, -}; - -enum { - CONF_HW_RXTX_RATE_MCS7 = 0, - CONF_HW_RXTX_RATE_MCS6, - CONF_HW_RXTX_RATE_MCS5, - CONF_HW_RXTX_RATE_MCS4, - CONF_HW_RXTX_RATE_MCS3, - CONF_HW_RXTX_RATE_MCS2, - CONF_HW_RXTX_RATE_MCS1, - CONF_HW_RXTX_RATE_MCS0, - CONF_HW_RXTX_RATE_54, - CONF_HW_RXTX_RATE_48, - CONF_HW_RXTX_RATE_36, - CONF_HW_RXTX_RATE_24, - CONF_HW_RXTX_RATE_22, - CONF_HW_RXTX_RATE_18, - CONF_HW_RXTX_RATE_12, - CONF_HW_RXTX_RATE_11, - CONF_HW_RXTX_RATE_9, - CONF_HW_RXTX_RATE_6, - CONF_HW_RXTX_RATE_5_5, - CONF_HW_RXTX_RATE_2, - CONF_HW_RXTX_RATE_1, - CONF_HW_RXTX_RATE_MAX, - CONF_HW_RXTX_RATE_UNSUPPORTED = 0xff -}; - -enum { - CONF_SG_DISABLE = 0, - CONF_SG_PROTECTIVE, - CONF_SG_OPPORTUNISTIC -}; - -enum { - /* - * PER threshold in PPM of the BT voice - * - * Range: 0 - 10000000 - */ - CONF_SG_BT_PER_THRESHOLD = 0, - - /* - * Number of consequent RX_ACTIVE activities to override BT voice - * frames to ensure WLAN connection - * - * Range: 0 - 100 - */ - CONF_SG_HV3_MAX_OVERRIDE, - - /* - * Defines the PER threshold of the BT voice - * - * Range: 0 - 65000 - */ - CONF_SG_BT_NFS_SAMPLE_INTERVAL, - - /* - * Defines the load ratio of BT - * - * Range: 0 - 100 (%) - */ - CONF_SG_BT_LOAD_RATIO, - - /* - * Defines whether the SG will force WLAN host to enter/exit PSM - * - * Range: 1 - SG can force, 0 - host handles PSM - */ - CONF_SG_AUTO_PS_MODE, - - /* - * Compensation percentage of probe requests when scan initiated - * during BT voice/ACL link. - * - * Range: 0 - 255 (%) - */ - CONF_SG_AUTO_SCAN_PROBE_REQ, - - /* - * Compensation percentage of probe requests when active scan initiated - * during BT voice - * - * Range: 0 - 255 (%) - */ - CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3, - - /* - * Defines antenna configuration (single/dual antenna) - * - * Range: 0 - single antenna, 1 - dual antenna - */ - CONF_SG_ANTENNA_CONFIGURATION, - - /* - * The threshold (percent) of max consequtive beacon misses before - * increasing priority of beacon reception. - * - * Range: 0 - 100 (%) - */ - CONF_SG_BEACON_MISS_PERCENT, - - /* - * The rate threshold below which receiving a data frame from the AP - * will increase the priority of the data frame above BT traffic. - * - * Range: 0,2, 5(=5.5), 6, 9, 11, 12, 18, 24, 36, 48, 54 - */ - CONF_SG_RATE_ADAPT_THRESH, - - /* - * Not used currently. - * - * Range: 0 - */ - CONF_SG_RATE_ADAPT_SNR, - - /* - * Configure the min and max time BT gains the antenna - * in WLAN PSM / BT master basic rate - * - * Range: 0 - 255 (ms) - */ - CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR, - CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR, - - /* - * The time after it expires no new WLAN trigger frame is trasmitted - * in WLAN PSM / BT master basic rate - * - * Range: 0 - 255 (ms) - */ - CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR, - - /* - * Configure the min and max time BT gains the antenna - * in WLAN PSM / BT slave basic rate - * - * Range: 0 - 255 (ms) - */ - CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR, - CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR, - - /* - * The time after it expires no new WLAN trigger frame is trasmitted - * in WLAN PSM / BT slave basic rate - * - * Range: 0 - 255 (ms) - */ - CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR, - - /* - * Configure the min and max time BT gains the antenna - * in WLAN PSM / BT master EDR - * - * Range: 0 - 255 (ms) - */ - CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR, - CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR, - - /* - * The time after it expires no new WLAN trigger frame is trasmitted - * in WLAN PSM / BT master EDR - * - * Range: 0 - 255 (ms) - */ - CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR, - - /* - * Configure the min and max time BT gains the antenna - * in WLAN PSM / BT slave EDR - * - * Range: 0 - 255 (ms) - */ - CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR, - CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR, - - /* - * The time after it expires no new WLAN trigger frame is trasmitted - * in WLAN PSM / BT slave EDR - * - * Range: 0 - 255 (ms) - */ - CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR, - - /* - * RX guard time before the beginning of a new BT voice frame during - * which no new WLAN trigger frame is transmitted. - * - * Range: 0 - 100000 (us) - */ - CONF_SG_RXT, - - /* - * TX guard time before the beginning of a new BT voice frame during - * which no new WLAN frame is transmitted. - * - * Range: 0 - 100000 (us) - */ - - CONF_SG_TXT, - - /* - * Enable adaptive RXT/TXT algorithm. If disabled, the host values - * will be utilized. - * - * Range: 0 - disable, 1 - enable - */ - CONF_SG_ADAPTIVE_RXT_TXT, - - /* - * The used WLAN legacy service period during active BT ACL link - * - * Range: 0 - 255 (ms) - */ - CONF_SG_PS_POLL_TIMEOUT, - - /* - * The used WLAN UPSD service period during active BT ACL link - * - * Range: 0 - 255 (ms) - */ - CONF_SG_UPSD_TIMEOUT, - - /* - * Configure the min and max time BT gains the antenna - * in WLAN Active / BT master EDR - * - * Range: 0 - 255 (ms) - */ - CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR, - CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR, - - /* - * The maximum time WLAN can gain the antenna for - * in WLAN Active / BT master EDR - * - * Range: 0 - 255 (ms) - */ - CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR, - - /* - * Configure the min and max time BT gains the antenna - * in WLAN Active / BT slave EDR - * - * Range: 0 - 255 (ms) - */ - CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR, - CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR, - - /* - * The maximum time WLAN can gain the antenna for - * in WLAN Active / BT slave EDR - * - * Range: 0 - 255 (ms) - */ - CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR, - - /* - * Configure the min and max time BT gains the antenna - * in WLAN Active / BT basic rate - * - * Range: 0 - 255 (ms) - */ - CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR, - CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR, - - /* - * The maximum time WLAN can gain the antenna for - * in WLAN Active / BT basic rate - * - * Range: 0 - 255 (ms) - */ - CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR, - - /* - * Compensation percentage of WLAN passive scan window if initiated - * during BT voice - * - * Range: 0 - 1000 (%) - */ - CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3, - - /* - * Compensation percentage of WLAN passive scan window if initiated - * during BT A2DP - * - * Range: 0 - 1000 (%) - */ - CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP, - - /* - * Fixed time ensured for BT traffic to gain the antenna during WLAN - * passive scan. - * - * Range: 0 - 1000 ms - */ - CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME, - - /* - * Fixed time ensured for WLAN traffic to gain the antenna during WLAN - * passive scan. - * - * Range: 0 - 1000 ms - */ - CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME, - - /* - * Number of consequent BT voice frames not interrupted by WLAN - * - * Range: 0 - 100 - */ - CONF_SG_HV3_MAX_SERVED, - - /* - * Protection time of the DHCP procedure. - * - * Range: 0 - 100000 (ms) - */ - CONF_SG_DHCP_TIME, - - /* - * Compensation percentage of WLAN active scan window if initiated - * during BT A2DP - * - * Range: 0 - 1000 (%) - */ - CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP, - CONF_SG_TEMP_PARAM_1, - CONF_SG_TEMP_PARAM_2, - CONF_SG_TEMP_PARAM_3, - CONF_SG_TEMP_PARAM_4, - CONF_SG_TEMP_PARAM_5, - CONF_SG_PARAMS_MAX, - CONF_SG_PARAMS_ALL = 0xff -}; - -struct conf_sg_settings { - u32 params[CONF_SG_PARAMS_MAX]; - u8 state; -}; - -enum conf_rx_queue_type { - CONF_RX_QUEUE_TYPE_LOW_PRIORITY, /* All except the high priority */ - CONF_RX_QUEUE_TYPE_HIGH_PRIORITY, /* Management and voice packets */ -}; - -struct conf_rx_settings { - /* - * The maximum amount of time, in TU, before the - * firmware discards the MSDU. - * - * Range: 0 - 0xFFFFFFFF - */ - u32 rx_msdu_life_time; - - /* - * Packet detection threshold in the PHY. - * - * FIXME: details unknown. - */ - u32 packet_detection_threshold; - - /* - * The longest time the STA will wait to receive traffic from the AP - * after a PS-poll has been transmitted. - * - * Range: 0 - 200000 - */ - u16 ps_poll_timeout; - /* - * The longest time the STA will wait to receive traffic from the AP - * after a frame has been sent from an UPSD enabled queue. - * - * Range: 0 - 200000 - */ - u16 upsd_timeout; - - /* - * The number of octets in an MPDU, below which an RTS/CTS - * handshake is not performed. - * - * Range: 0 - 4096 - */ - u16 rts_threshold; - - /* - * The RX Clear Channel Assessment threshold in the PHY - * (the energy threshold). - * - * Range: ENABLE_ENERGY_D == 0x140A - * DISABLE_ENERGY_D == 0xFFEF - */ - u16 rx_cca_threshold; - - /* - * Occupied Rx mem-blocks number which requires interrupting the host - * (0 = no buffering, 0xffff = disabled). - * - * Range: u16 - */ - u16 irq_blk_threshold; - - /* - * Rx packets number which requires interrupting the host - * (0 = no buffering). - * - * Range: u16 - */ - u16 irq_pkt_threshold; - - /* - * Max time in msec the FW may delay RX-Complete interrupt. - * - * Range: 1 - 100 - */ - u16 irq_timeout; - - /* - * The RX queue type. - * - * Range: RX_QUEUE_TYPE_RX_LOW_PRIORITY, RX_QUEUE_TYPE_RX_HIGH_PRIORITY, - */ - u8 queue_type; -}; - -#define CONF_TX_MAX_RATE_CLASSES 8 - -#define CONF_TX_RATE_MASK_UNSPECIFIED 0 -#define CONF_TX_RATE_MASK_BASIC (CONF_HW_BIT_RATE_1MBPS | \ - CONF_HW_BIT_RATE_2MBPS) -#define CONF_TX_RATE_RETRY_LIMIT 10 - -struct conf_tx_rate_class { - - /* - * The rates enabled for this rate class. - * - * Range: CONF_HW_BIT_RATE_* bit mask - */ - u32 enabled_rates; - - /* - * The dot11 short retry limit used for TX retries. - * - * Range: u8 - */ - u8 short_retry_limit; - - /* - * The dot11 long retry limit used for TX retries. - * - * Range: u8 - */ - u8 long_retry_limit; - - /* - * Flags controlling the attributes of TX transmission. - * - * Range: bit 0: Truncate - when set, FW attempts to send a frame stop - * when the total valid per-rate attempts have - * been exhausted; otherwise transmissions - * will continue at the lowest available rate - * until the appropriate one of the - * short_retry_limit, long_retry_limit, - * dot11_max_transmit_msdu_life_time, or - * max_tx_life_time, is exhausted. - * 1: Preamble Override - indicates if the preamble type - * should be used in TX. - * 2: Preamble Type - the type of the preamble to be used by - * the policy (0 - long preamble, 1 - short preamble. - */ - u8 aflags; -}; - -#define CONF_TX_MAX_AC_COUNT 4 - -/* Slot number setting to start transmission at PIFS interval */ -#define CONF_TX_AIFS_PIFS 1 -/* Slot number setting to start transmission at DIFS interval normal - * DCF access */ -#define CONF_TX_AIFS_DIFS 2 - - -enum conf_tx_ac { - CONF_TX_AC_BE = 0, /* best effort / legacy */ - CONF_TX_AC_BK = 1, /* background */ - CONF_TX_AC_VI = 2, /* video */ - CONF_TX_AC_VO = 3, /* voice */ - CONF_TX_AC_CTS2SELF = 4, /* fictious AC, follows AC_VO */ - CONF_TX_AC_ANY_TID = 0x1f -}; - -struct conf_tx_ac_category { - /* - * The AC class identifier. - * - * Range: enum conf_tx_ac - */ - u8 ac; - - /* - * The contention window minimum size (in slots) for the access - * class. - * - * Range: u8 - */ - u8 cw_min; - - /* - * The contention window maximum size (in slots) for the access - * class. - * - * Range: u8 - */ - u16 cw_max; - - /* - * The AIF value (in slots) for the access class. - * - * Range: u8 - */ - u8 aifsn; - - /* - * The TX Op Limit (in microseconds) for the access class. - * - * Range: u16 - */ - u16 tx_op_limit; -}; - -#define CONF_TX_MAX_TID_COUNT 8 - -enum { - CONF_CHANNEL_TYPE_DCF = 0, /* DC/LEGACY*/ - CONF_CHANNEL_TYPE_EDCF = 1, /* EDCA*/ - CONF_CHANNEL_TYPE_HCCA = 2, /* HCCA*/ -}; - -enum { - CONF_PS_SCHEME_LEGACY = 0, - CONF_PS_SCHEME_UPSD_TRIGGER = 1, - CONF_PS_SCHEME_LEGACY_PSPOLL = 2, - CONF_PS_SCHEME_SAPSD = 3, -}; - -enum { - CONF_ACK_POLICY_LEGACY = 0, - CONF_ACK_POLICY_NO_ACK = 1, - CONF_ACK_POLICY_BLOCK = 2, -}; - - -struct conf_tx_tid { - u8 queue_id; - u8 channel_type; - u8 tsid; - u8 ps_scheme; - u8 ack_policy; - u32 apsd_conf[2]; -}; - -struct conf_tx_settings { - /* - * The TX ED value for TELEC Enable/Disable. - * - * Range: 0, 1 - */ - u8 tx_energy_detection; - - /* - * Configuration for rate classes for TX (currently only one - * rate class supported.) - */ - struct conf_tx_rate_class rc_conf; - - /* - * Configuration for access categories for TX rate control. - */ - u8 ac_conf_count; - struct conf_tx_ac_category ac_conf[CONF_TX_MAX_AC_COUNT]; - - /* - * Configuration for TID parameters. - */ - u8 tid_conf_count; - struct conf_tx_tid tid_conf[CONF_TX_MAX_TID_COUNT]; - - /* - * The TX fragmentation threshold. - * - * Range: u16 - */ - u16 frag_threshold; - - /* - * Max time in msec the FW may delay frame TX-Complete interrupt. - * - * Range: u16 - */ - u16 tx_compl_timeout; - - /* - * Completed TX packet count which requires to issue the TX-Complete - * interrupt. - * - * Range: u16 - */ - u16 tx_compl_threshold; - - /* - * The rate used for control messages and scanning on the 2.4GHz band - * - * Range: CONF_HW_BIT_RATE_* bit mask - */ - u32 basic_rate; - - /* - * The rate used for control messages and scanning on the 5GHz band - * - * Range: CONF_HW_BIT_RATE_* bit mask - */ - u32 basic_rate_5; -}; - -enum { - CONF_WAKE_UP_EVENT_BEACON = 0x01, /* Wake on every Beacon*/ - CONF_WAKE_UP_EVENT_DTIM = 0x02, /* Wake on every DTIM*/ - CONF_WAKE_UP_EVENT_N_DTIM = 0x04, /* Wake every Nth DTIM */ - CONF_WAKE_UP_EVENT_N_BEACONS = 0x08, /* Wake every Nth beacon */ - CONF_WAKE_UP_EVENT_BITS_MASK = 0x0F -}; - -#define CONF_MAX_BCN_FILT_IE_COUNT 32 - -#define CONF_BCN_RULE_PASS_ON_CHANGE BIT(0) -#define CONF_BCN_RULE_PASS_ON_APPEARANCE BIT(1) - -#define CONF_BCN_IE_OUI_LEN 3 -#define CONF_BCN_IE_VER_LEN 2 - -struct conf_bcn_filt_rule { - /* - * IE number to which to associate a rule. - * - * Range: u8 - */ - u8 ie; - - /* - * Rule to associate with the specific ie. - * - * Range: CONF_BCN_RULE_PASS_ON_* - */ - u8 rule; - - /* - * OUI for the vendor specifie IE (221) - */ - u8 oui[CONF_BCN_IE_OUI_LEN]; - - /* - * Type for the vendor specifie IE (221) - */ - u8 type; - - /* - * Version for the vendor specifie IE (221) - */ - u8 version[CONF_BCN_IE_VER_LEN]; -}; - -#define CONF_MAX_RSSI_SNR_TRIGGERS 8 - -enum { - CONF_TRIG_METRIC_RSSI_BEACON = 0, - CONF_TRIG_METRIC_RSSI_DATA, - CONF_TRIG_METRIC_SNR_BEACON, - CONF_TRIG_METRIC_SNR_DATA -}; - -enum { - CONF_TRIG_EVENT_TYPE_LEVEL = 0, - CONF_TRIG_EVENT_TYPE_EDGE -}; - -enum { - CONF_TRIG_EVENT_DIR_LOW = 0, - CONF_TRIG_EVENT_DIR_HIGH, - CONF_TRIG_EVENT_DIR_BIDIR -}; - -struct conf_sig_weights { - - /* - * RSSI from beacons average weight. - * - * Range: u8 - */ - u8 rssi_bcn_avg_weight; - - /* - * RSSI from data average weight. - * - * Range: u8 - */ - u8 rssi_pkt_avg_weight; - - /* - * SNR from beacons average weight. - * - * Range: u8 - */ - u8 snr_bcn_avg_weight; - - /* - * SNR from data average weight. - * - * Range: u8 - */ - u8 snr_pkt_avg_weight; -}; - -enum conf_bcn_filt_mode { - CONF_BCN_FILT_MODE_DISABLED = 0, - CONF_BCN_FILT_MODE_ENABLED = 1 -}; - -enum conf_bet_mode { - CONF_BET_MODE_DISABLE = 0, - CONF_BET_MODE_ENABLE = 1, -}; - -struct conf_conn_settings { - /* - * Firmware wakeup conditions configuration. The host may set only - * one bit. - * - * Range: CONF_WAKE_UP_EVENT_* - */ - u8 wake_up_event; - - /* - * Listen interval for beacons or Dtims. - * - * Range: 0 for beacon and Dtim wakeup - * 1-10 for x Dtims - * 1-255 for x beacons - */ - u8 listen_interval; - - /* - * Enable or disable the beacon filtering. - * - * Range: CONF_BCN_FILT_MODE_* - */ - enum conf_bcn_filt_mode bcn_filt_mode; - - /* - * Configure Beacon filter pass-thru rules. - */ - u8 bcn_filt_ie_count; - struct conf_bcn_filt_rule bcn_filt_ie[CONF_MAX_BCN_FILT_IE_COUNT]; - - /* - * The number of consequtive beacons to lose, before the firmware - * becomes out of synch. - * - * Range: u32 - */ - u32 synch_fail_thold; - - /* - * After out-of-synch, the number of TU's to wait without a further - * received beacon (or probe response) before issuing the BSS_EVENT_LOSE - * event. - * - * Range: u32 - */ - u32 bss_lose_timeout; - - /* - * Beacon receive timeout. - * - * Range: u32 - */ - u32 beacon_rx_timeout; - - /* - * Broadcast receive timeout. - * - * Range: u32 - */ - u32 broadcast_timeout; - - /* - * Enable/disable reception of broadcast packets in power save mode - * - * Range: 1 - enable, 0 - disable - */ - u8 rx_broadcast_in_ps; - - /* - * Consequtive PS Poll failures before sending event to driver - * - * Range: u8 - */ - u8 ps_poll_threshold; - - /* - * PS Poll failure recovery ACTIVE period length - * - * Range: u32 (ms) - */ - u32 ps_poll_recovery_period; - - /* - * Configuration of signal average weights. - */ - struct conf_sig_weights sig_weights; - - /* - * Specifies if beacon early termination procedure is enabled or - * disabled. - * - * Range: CONF_BET_MODE_* - */ - u8 bet_enable; - - /* - * Specifies the maximum number of consecutive beacons that may be - * early terminated. After this number is reached at least one full - * beacon must be correctly received in FW before beacon ET - * resumes. - * - * Range 0 - 255 - */ - u8 bet_max_consecutive; - - /* - * Specifies the maximum number of times to try PSM entry if it fails - * (if sending the appropriate null-func message fails.) - * - * Range 0 - 255 - */ - u8 psm_entry_retries; - - /* - * Specifies the maximum number of times to try transmit the PSM entry - * null-func frame for each PSM entry attempt - * - * Range 0 - 255 - */ - u8 psm_entry_nullfunc_retries; - - /* - * Specifies the time to linger in active mode after successfully - * transmitting the PSM entry null-func frame. - * - * Range 0 - 255 TU's - */ - u8 psm_entry_hangover_period; - - /* - * - * Specifies the interval of the connection keep-alive null-func - * frame in ms. - * - * Range: 1000 - 3600000 - */ - u32 keep_alive_interval; - - /* - * Maximum listen interval supported by the driver in units of beacons. - * - * Range: u16 - */ - u8 max_listen_interval; -}; - -enum { - CONF_REF_CLK_19_2_E, - CONF_REF_CLK_26_E, - CONF_REF_CLK_38_4_E, - CONF_REF_CLK_52_E -}; - -enum single_dual_band_enum { - CONF_SINGLE_BAND, - CONF_DUAL_BAND -}; - -#define CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE 15 -#define CONF_NUMBER_OF_SUB_BANDS_5 7 -#define CONF_NUMBER_OF_RATE_GROUPS 6 -#define CONF_NUMBER_OF_CHANNELS_2_4 14 -#define CONF_NUMBER_OF_CHANNELS_5 35 - -struct conf_radio_parms { - /* - * FEM parameter set to use - * - * Range: 0 or 1 - */ - u8 fem; -}; - -struct conf_itrim_settings { - /* enable dco itrim */ - u8 enable; - - /* moderation timeout in microsecs from the last TX */ - u32 timeout; -}; - -struct conf_pm_config_settings { - /* - * Host clock settling time - * - * Range: 0 - 30000 us - */ - u32 host_clk_settling_time; - - /* - * Host fast wakeup support - * - * Range: true, false - */ - bool host_fast_wakeup_support; -}; - -struct conf_roam_trigger_settings { - /* - * The minimum interval between two trigger events. - * - * Range: 0 - 60000 ms - */ - u16 trigger_pacing; - - /* - * The weight for rssi/beacon average calculation - * - * Range: 0 - 255 - */ - u8 avg_weight_rssi_beacon; - - /* - * The weight for rssi/data frame average calculation - * - * Range: 0 - 255 - */ - u8 avg_weight_rssi_data; - - /* - * The weight for snr/beacon average calculation - * - * Range: 0 - 255 - */ - u8 avg_weight_snr_beacon; - - /* - * The weight for snr/data frame average calculation - * - * Range: 0 - 255 - */ - u8 avg_weight_snr_data; -}; - -struct conf_scan_settings { - /* - * The minimum time to wait on each channel for active scans - * - * Range: 0 - 65536 tu - */ - u16 min_dwell_time_active; - - /* - * The maximum time to wait on each channel for active scans - * - * Range: 0 - 65536 tu - */ - u16 max_dwell_time_active; - - /* - * The maximum time to wait on each channel for passive scans - * - * Range: 0 - 65536 tu - */ - u16 min_dwell_time_passive; - - /* - * The maximum time to wait on each channel for passive scans - * - * Range: 0 - 65536 tu - */ - u16 max_dwell_time_passive; - - /* - * Number of probe requests to transmit on each active scan channel - * - * Range: u8 - */ - u16 num_probe_reqs; - -}; - -/* these are number of channels on the band divided by two, rounded up */ -#define CONF_TX_PWR_COMPENSATION_LEN_2 7 -#define CONF_TX_PWR_COMPENSATION_LEN_5 18 - -struct conf_rf_settings { - /* - * Per channel power compensation for 2.4GHz - * - * Range: s8 - */ - u8 tx_per_channel_power_compensation_2[CONF_TX_PWR_COMPENSATION_LEN_2]; - - /* - * Per channel power compensation for 5GHz - * - * Range: s8 - */ - u8 tx_per_channel_power_compensation_5[CONF_TX_PWR_COMPENSATION_LEN_5]; -}; - -struct conf_drv_settings { - struct conf_sg_settings sg; - struct conf_rx_settings rx; - struct conf_tx_settings tx; - struct conf_conn_settings conn; - struct conf_itrim_settings itrim; - struct conf_pm_config_settings pm_config; - struct conf_roam_trigger_settings roam_trigger; - struct conf_scan_settings scan; - struct conf_rf_settings rf; -}; - -#endif diff --git a/drivers/net/wireless/wl12xx/wl1271_debugfs.c b/drivers/net/wireless/wl12xx/wl1271_debugfs.c deleted file mode 100644 index 3468b849852..00000000000 --- a/drivers/net/wireless/wl12xx/wl1271_debugfs.c +++ /dev/null @@ -1,590 +0,0 @@ -/* - * This file is part of wl1271 - * - * Copyright (C) 2009 Nokia Corporation - * - * Contact: Luciano Coelho - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include "wl1271_debugfs.h" - -#include -#include - -#include "wl1271.h" -#include "wl1271_acx.h" -#include "wl1271_ps.h" -#include "wl1271_io.h" - -/* ms */ -#define WL1271_DEBUGFS_STATS_LIFETIME 1000 - -/* debugfs macros idea from mac80211 */ -#define DEBUGFS_FORMAT_BUFFER_SIZE 100 -static int wl1271_format_buffer(char __user *userbuf, size_t count, - loff_t *ppos, char *fmt, ...) -{ - va_list args; - char buf[DEBUGFS_FORMAT_BUFFER_SIZE]; - int res; - - va_start(args, fmt); - res = vscnprintf(buf, sizeof(buf), fmt, args); - va_end(args); - - return simple_read_from_buffer(userbuf, count, ppos, buf, res); -} - -#define DEBUGFS_READONLY_FILE(name, fmt, value...) \ -static ssize_t name## _read(struct file *file, char __user *userbuf, \ - size_t count, loff_t *ppos) \ -{ \ - struct wl1271 *wl = file->private_data; \ - return wl1271_format_buffer(userbuf, count, ppos, \ - fmt "\n", ##value); \ -} \ - \ -static const struct file_operations name## _ops = { \ - .read = name## _read, \ - .open = wl1271_open_file_generic, \ - .llseek = generic_file_llseek, \ -}; - -#define DEBUGFS_ADD(name, parent) \ - wl->debugfs.name = debugfs_create_file(#name, 0400, parent, \ - wl, &name## _ops); \ - if (IS_ERR(wl->debugfs.name)) { \ - ret = PTR_ERR(wl->debugfs.name); \ - wl->debugfs.name = NULL; \ - goto out; \ - } - -#define DEBUGFS_DEL(name) \ - do { \ - debugfs_remove(wl->debugfs.name); \ - wl->debugfs.name = NULL; \ - } while (0) - -#define DEBUGFS_FWSTATS_FILE(sub, name, fmt) \ -static ssize_t sub## _ ##name## _read(struct file *file, \ - char __user *userbuf, \ - size_t count, loff_t *ppos) \ -{ \ - struct wl1271 *wl = file->private_data; \ - \ - wl1271_debugfs_update_stats(wl); \ - \ - return wl1271_format_buffer(userbuf, count, ppos, fmt "\n", \ - wl->stats.fw_stats->sub.name); \ -} \ - \ -static const struct file_operations sub## _ ##name## _ops = { \ - .read = sub## _ ##name## _read, \ - .open = wl1271_open_file_generic, \ - .llseek = generic_file_llseek, \ -}; - -#define DEBUGFS_FWSTATS_ADD(sub, name) \ - DEBUGFS_ADD(sub## _ ##name, wl->debugfs.fw_statistics) - -#define DEBUGFS_FWSTATS_DEL(sub, name) \ - DEBUGFS_DEL(sub## _ ##name) - -static void wl1271_debugfs_update_stats(struct wl1271 *wl) -{ - int ret; - - mutex_lock(&wl->mutex); - - ret = wl1271_ps_elp_wakeup(wl, false); - if (ret < 0) - goto out; - - if (wl->state == WL1271_STATE_ON && - time_after(jiffies, wl->stats.fw_stats_update + - msecs_to_jiffies(WL1271_DEBUGFS_STATS_LIFETIME))) { - wl1271_acx_statistics(wl, wl->stats.fw_stats); - wl->stats.fw_stats_update = jiffies; - } - - wl1271_ps_elp_sleep(wl); - -out: - mutex_unlock(&wl->mutex); -} - -static int wl1271_open_file_generic(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - -DEBUGFS_FWSTATS_FILE(tx, internal_desc_overflow, "%u"); - -DEBUGFS_FWSTATS_FILE(rx, out_of_mem, "%u"); -DEBUGFS_FWSTATS_FILE(rx, hdr_overflow, "%u"); -DEBUGFS_FWSTATS_FILE(rx, hw_stuck, "%u"); -DEBUGFS_FWSTATS_FILE(rx, dropped, "%u"); -DEBUGFS_FWSTATS_FILE(rx, fcs_err, "%u"); -DEBUGFS_FWSTATS_FILE(rx, xfr_hint_trig, "%u"); -DEBUGFS_FWSTATS_FILE(rx, path_reset, "%u"); -DEBUGFS_FWSTATS_FILE(rx, reset_counter, "%u"); - -DEBUGFS_FWSTATS_FILE(dma, rx_requested, "%u"); -DEBUGFS_FWSTATS_FILE(dma, rx_errors, "%u"); -DEBUGFS_FWSTATS_FILE(dma, tx_requested, "%u"); -DEBUGFS_FWSTATS_FILE(dma, tx_errors, "%u"); - -DEBUGFS_FWSTATS_FILE(isr, cmd_cmplt, "%u"); -DEBUGFS_FWSTATS_FILE(isr, fiqs, "%u"); -DEBUGFS_FWSTATS_FILE(isr, rx_headers, "%u"); -DEBUGFS_FWSTATS_FILE(isr, rx_mem_overflow, "%u"); -DEBUGFS_FWSTATS_FILE(isr, rx_rdys, "%u"); -DEBUGFS_FWSTATS_FILE(isr, irqs, "%u"); -DEBUGFS_FWSTATS_FILE(isr, tx_procs, "%u"); -DEBUGFS_FWSTATS_FILE(isr, decrypt_done, "%u"); -DEBUGFS_FWSTATS_FILE(isr, dma0_done, "%u"); -DEBUGFS_FWSTATS_FILE(isr, dma1_done, "%u"); -DEBUGFS_FWSTATS_FILE(isr, tx_exch_complete, "%u"); -DEBUGFS_FWSTATS_FILE(isr, commands, "%u"); -DEBUGFS_FWSTATS_FILE(isr, rx_procs, "%u"); -DEBUGFS_FWSTATS_FILE(isr, hw_pm_mode_changes, "%u"); -DEBUGFS_FWSTATS_FILE(isr, host_acknowledges, "%u"); -DEBUGFS_FWSTATS_FILE(isr, pci_pm, "%u"); -DEBUGFS_FWSTATS_FILE(isr, wakeups, "%u"); -DEBUGFS_FWSTATS_FILE(isr, low_rssi, "%u"); - -DEBUGFS_FWSTATS_FILE(wep, addr_key_count, "%u"); -DEBUGFS_FWSTATS_FILE(wep, default_key_count, "%u"); -/* skipping wep.reserved */ -DEBUGFS_FWSTATS_FILE(wep, key_not_found, "%u"); -DEBUGFS_FWSTATS_FILE(wep, decrypt_fail, "%u"); -DEBUGFS_FWSTATS_FILE(wep, packets, "%u"); -DEBUGFS_FWSTATS_FILE(wep, interrupt, "%u"); - -DEBUGFS_FWSTATS_FILE(pwr, ps_enter, "%u"); -DEBUGFS_FWSTATS_FILE(pwr, elp_enter, "%u"); -DEBUGFS_FWSTATS_FILE(pwr, missing_bcns, "%u"); -DEBUGFS_FWSTATS_FILE(pwr, wake_on_host, "%u"); -DEBUGFS_FWSTATS_FILE(pwr, wake_on_timer_exp, "%u"); -DEBUGFS_FWSTATS_FILE(pwr, tx_with_ps, "%u"); -DEBUGFS_FWSTATS_FILE(pwr, tx_without_ps, "%u"); -DEBUGFS_FWSTATS_FILE(pwr, rcvd_beacons, "%u"); -DEBUGFS_FWSTATS_FILE(pwr, power_save_off, "%u"); -DEBUGFS_FWSTATS_FILE(pwr, enable_ps, "%u"); -DEBUGFS_FWSTATS_FILE(pwr, disable_ps, "%u"); -DEBUGFS_FWSTATS_FILE(pwr, fix_tsf_ps, "%u"); -/* skipping cont_miss_bcns_spread for now */ -DEBUGFS_FWSTATS_FILE(pwr, rcvd_awake_beacons, "%u"); - -DEBUGFS_FWSTATS_FILE(mic, rx_pkts, "%u"); -DEBUGFS_FWSTATS_FILE(mic, calc_failure, "%u"); - -DEBUGFS_FWSTATS_FILE(aes, encrypt_fail, "%u"); -DEBUGFS_FWSTATS_FILE(aes, decrypt_fail, "%u"); -DEBUGFS_FWSTATS_FILE(aes, encrypt_packets, "%u"); -DEBUGFS_FWSTATS_FILE(aes, decrypt_packets, "%u"); -DEBUGFS_FWSTATS_FILE(aes, encrypt_interrupt, "%u"); -DEBUGFS_FWSTATS_FILE(aes, decrypt_interrupt, "%u"); - -DEBUGFS_FWSTATS_FILE(event, heart_beat, "%u"); -DEBUGFS_FWSTATS_FILE(event, calibration, "%u"); -DEBUGFS_FWSTATS_FILE(event, rx_mismatch, "%u"); -DEBUGFS_FWSTATS_FILE(event, rx_mem_empty, "%u"); -DEBUGFS_FWSTATS_FILE(event, rx_pool, "%u"); -DEBUGFS_FWSTATS_FILE(event, oom_late, "%u"); -DEBUGFS_FWSTATS_FILE(event, phy_transmit_error, "%u"); -DEBUGFS_FWSTATS_FILE(event, tx_stuck, "%u"); - -DEBUGFS_FWSTATS_FILE(ps, pspoll_timeouts, "%u"); -DEBUGFS_FWSTATS_FILE(ps, upsd_timeouts, "%u"); -DEBUGFS_FWSTATS_FILE(ps, upsd_max_sptime, "%u"); -DEBUGFS_FWSTATS_FILE(ps, upsd_max_apturn, "%u"); -DEBUGFS_FWSTATS_FILE(ps, pspoll_max_apturn, "%u"); -DEBUGFS_FWSTATS_FILE(ps, pspoll_utilization, "%u"); -DEBUGFS_FWSTATS_FILE(ps, upsd_utilization, "%u"); - -DEBUGFS_FWSTATS_FILE(rxpipe, rx_prep_beacon_drop, "%u"); -DEBUGFS_FWSTATS_FILE(rxpipe, descr_host_int_trig_rx_data, "%u"); -DEBUGFS_FWSTATS_FILE(rxpipe, beacon_buffer_thres_host_int_trig_rx_data, "%u"); -DEBUGFS_FWSTATS_FILE(rxpipe, missed_beacon_host_int_trig_rx_data, "%u"); -DEBUGFS_FWSTATS_FILE(rxpipe, tx_xfr_host_int_trig_rx_data, "%u"); - -DEBUGFS_READONLY_FILE(retry_count, "%u", wl->stats.retry_count); -DEBUGFS_READONLY_FILE(excessive_retries, "%u", - wl->stats.excessive_retries); - -static ssize_t tx_queue_len_read(struct file *file, char __user *userbuf, - size_t count, loff_t *ppos) -{ - struct wl1271 *wl = file->private_data; - u32 queue_len; - char buf[20]; - int res; - - queue_len = skb_queue_len(&wl->tx_queue); - - res = scnprintf(buf, sizeof(buf), "%u\n", queue_len); - return simple_read_from_buffer(userbuf, count, ppos, buf, res); -} - -static const struct file_operations tx_queue_len_ops = { - .read = tx_queue_len_read, - .open = wl1271_open_file_generic, - .llseek = default_llseek, -}; - -static ssize_t gpio_power_read(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct wl1271 *wl = file->private_data; - bool state = test_bit(WL1271_FLAG_GPIO_POWER, &wl->flags); - - int res; - char buf[10]; - - res = scnprintf(buf, sizeof(buf), "%d\n", state); - - return simple_read_from_buffer(user_buf, count, ppos, buf, res); -} - -static ssize_t gpio_power_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct wl1271 *wl = file->private_data; - char buf[10]; - size_t len; - unsigned long value; - int ret; - - mutex_lock(&wl->mutex); - - len = min(count, sizeof(buf) - 1); - if (copy_from_user(buf, user_buf, len)) { - ret = -EFAULT; - goto out; - } - buf[len] = '\0'; - - ret = strict_strtoul(buf, 0, &value); - if (ret < 0) { - wl1271_warning("illegal value in gpio_power"); - goto out; - } - - if (value) - wl1271_power_on(wl); - else - wl1271_power_off(wl); - -out: - mutex_unlock(&wl->mutex); - return count; -} - -static const struct file_operations gpio_power_ops = { - .read = gpio_power_read, - .write = gpio_power_write, - .open = wl1271_open_file_generic, - .llseek = default_llseek, -}; - -static void wl1271_debugfs_delete_files(struct wl1271 *wl) -{ - DEBUGFS_FWSTATS_DEL(tx, internal_desc_overflow); - - DEBUGFS_FWSTATS_DEL(rx, out_of_mem); - DEBUGFS_FWSTATS_DEL(rx, hdr_overflow); - DEBUGFS_FWSTATS_DEL(rx, hw_stuck); - DEBUGFS_FWSTATS_DEL(rx, dropped); - DEBUGFS_FWSTATS_DEL(rx, fcs_err); - DEBUGFS_FWSTATS_DEL(rx, xfr_hint_trig); - DEBUGFS_FWSTATS_DEL(rx, path_reset); - DEBUGFS_FWSTATS_DEL(rx, reset_counter); - - DEBUGFS_FWSTATS_DEL(dma, rx_requested); - DEBUGFS_FWSTATS_DEL(dma, rx_errors); - DEBUGFS_FWSTATS_DEL(dma, tx_requested); - DEBUGFS_FWSTATS_DEL(dma, tx_errors); - - DEBUGFS_FWSTATS_DEL(isr, cmd_cmplt); - DEBUGFS_FWSTATS_DEL(isr, fiqs); - DEBUGFS_FWSTATS_DEL(isr, rx_headers); - DEBUGFS_FWSTATS_DEL(isr, rx_mem_overflow); - DEBUGFS_FWSTATS_DEL(isr, rx_rdys); - DEBUGFS_FWSTATS_DEL(isr, irqs); - DEBUGFS_FWSTATS_DEL(isr, tx_procs); - DEBUGFS_FWSTATS_DEL(isr, decrypt_done); - DEBUGFS_FWSTATS_DEL(isr, dma0_done); - DEBUGFS_FWSTATS_DEL(isr, dma1_done); - DEBUGFS_FWSTATS_DEL(isr, tx_exch_complete); - DEBUGFS_FWSTATS_DEL(isr, commands); - DEBUGFS_FWSTATS_DEL(isr, rx_procs); - DEBUGFS_FWSTATS_DEL(isr, hw_pm_mode_changes); - DEBUGFS_FWSTATS_DEL(isr, host_acknowledges); - DEBUGFS_FWSTATS_DEL(isr, pci_pm); - DEBUGFS_FWSTATS_DEL(isr, wakeups); - DEBUGFS_FWSTATS_DEL(isr, low_rssi); - - DEBUGFS_FWSTATS_DEL(wep, addr_key_count); - DEBUGFS_FWSTATS_DEL(wep, default_key_count); - /* skipping wep.reserved */ - DEBUGFS_FWSTATS_DEL(wep, key_not_found); - DEBUGFS_FWSTATS_DEL(wep, decrypt_fail); - DEBUGFS_FWSTATS_DEL(wep, packets); - DEBUGFS_FWSTATS_DEL(wep, interrupt); - - DEBUGFS_FWSTATS_DEL(pwr, ps_enter); - DEBUGFS_FWSTATS_DEL(pwr, elp_enter); - DEBUGFS_FWSTATS_DEL(pwr, missing_bcns); - DEBUGFS_FWSTATS_DEL(pwr, wake_on_host); - DEBUGFS_FWSTATS_DEL(pwr, wake_on_timer_exp); - DEBUGFS_FWSTATS_DEL(pwr, tx_with_ps); - DEBUGFS_FWSTATS_DEL(pwr, tx_without_ps); - DEBUGFS_FWSTATS_DEL(pwr, rcvd_beacons); - DEBUGFS_FWSTATS_DEL(pwr, power_save_off); - DEBUGFS_FWSTATS_DEL(pwr, enable_ps); - DEBUGFS_FWSTATS_DEL(pwr, disable_ps); - DEBUGFS_FWSTATS_DEL(pwr, fix_tsf_ps); - /* skipping cont_miss_bcns_spread for now */ - DEBUGFS_FWSTATS_DEL(pwr, rcvd_awake_beacons); - - DEBUGFS_FWSTATS_DEL(mic, rx_pkts); - DEBUGFS_FWSTATS_DEL(mic, calc_failure); - - DEBUGFS_FWSTATS_DEL(aes, encrypt_fail); - DEBUGFS_FWSTATS_DEL(aes, decrypt_fail); - DEBUGFS_FWSTATS_DEL(aes, encrypt_packets); - DEBUGFS_FWSTATS_DEL(aes, decrypt_packets); - DEBUGFS_FWSTATS_DEL(aes, encrypt_interrupt); - DEBUGFS_FWSTATS_DEL(aes, decrypt_interrupt); - - DEBUGFS_FWSTATS_DEL(event, heart_beat); - DEBUGFS_FWSTATS_DEL(event, calibration); - DEBUGFS_FWSTATS_DEL(event, rx_mismatch); - DEBUGFS_FWSTATS_DEL(event, rx_mem_empty); - DEBUGFS_FWSTATS_DEL(event, rx_pool); - DEBUGFS_FWSTATS_DEL(event, oom_late); - DEBUGFS_FWSTATS_DEL(event, phy_transmit_error); - DEBUGFS_FWSTATS_DEL(event, tx_stuck); - - DEBUGFS_FWSTATS_DEL(ps, pspoll_timeouts); - DEBUGFS_FWSTATS_DEL(ps, upsd_timeouts); - DEBUGFS_FWSTATS_DEL(ps, upsd_max_sptime); - DEBUGFS_FWSTATS_DEL(ps, upsd_max_apturn); - DEBUGFS_FWSTATS_DEL(ps, pspoll_max_apturn); - DEBUGFS_FWSTATS_DEL(ps, pspoll_utilization); - DEBUGFS_FWSTATS_DEL(ps, upsd_utilization); - - DEBUGFS_FWSTATS_DEL(rxpipe, rx_prep_beacon_drop); - DEBUGFS_FWSTATS_DEL(rxpipe, descr_host_int_trig_rx_data); - DEBUGFS_FWSTATS_DEL(rxpipe, beacon_buffer_thres_host_int_trig_rx_data); - DEBUGFS_FWSTATS_DEL(rxpipe, missed_beacon_host_int_trig_rx_data); - DEBUGFS_FWSTATS_DEL(rxpipe, tx_xfr_host_int_trig_rx_data); - - DEBUGFS_DEL(tx_queue_len); - DEBUGFS_DEL(retry_count); - DEBUGFS_DEL(excessive_retries); - - DEBUGFS_DEL(gpio_power); -} - -static int wl1271_debugfs_add_files(struct wl1271 *wl) -{ - int ret = 0; - - DEBUGFS_FWSTATS_ADD(tx, internal_desc_overflow); - - DEBUGFS_FWSTATS_ADD(rx, out_of_mem); - DEBUGFS_FWSTATS_ADD(rx, hdr_overflow); - DEBUGFS_FWSTATS_ADD(rx, hw_stuck); - DEBUGFS_FWSTATS_ADD(rx, dropped); - DEBUGFS_FWSTATS_ADD(rx, fcs_err); - DEBUGFS_FWSTATS_ADD(rx, xfr_hint_trig); - DEBUGFS_FWSTATS_ADD(rx, path_reset); - DEBUGFS_FWSTATS_ADD(rx, reset_counter); - - DEBUGFS_FWSTATS_ADD(dma, rx_requested); - DEBUGFS_FWSTATS_ADD(dma, rx_errors); - DEBUGFS_FWSTATS_ADD(dma, tx_requested); - DEBUGFS_FWSTATS_ADD(dma, tx_errors); - - DEBUGFS_FWSTATS_ADD(isr, cmd_cmplt); - DEBUGFS_FWSTATS_ADD(isr, fiqs); - DEBUGFS_FWSTATS_ADD(isr, rx_headers); - DEBUGFS_FWSTATS_ADD(isr, rx_mem_overflow); - DEBUGFS_FWSTATS_ADD(isr, rx_rdys); - DEBUGFS_FWSTATS_ADD(isr, irqs); - DEBUGFS_FWSTATS_ADD(isr, tx_procs); - DEBUGFS_FWSTATS_ADD(isr, decrypt_done); - DEBUGFS_FWSTATS_ADD(isr, dma0_done); - DEBUGFS_FWSTATS_ADD(isr, dma1_done); - DEBUGFS_FWSTATS_ADD(isr, tx_exch_complete); - DEBUGFS_FWSTATS_ADD(isr, commands); - DEBUGFS_FWSTATS_ADD(isr, rx_procs); - DEBUGFS_FWSTATS_ADD(isr, hw_pm_mode_changes); - DEBUGFS_FWSTATS_ADD(isr, host_acknowledges); - DEBUGFS_FWSTATS_ADD(isr, pci_pm); - DEBUGFS_FWSTATS_ADD(isr, wakeups); - DEBUGFS_FWSTATS_ADD(isr, low_rssi); - - DEBUGFS_FWSTATS_ADD(wep, addr_key_count); - DEBUGFS_FWSTATS_ADD(wep, default_key_count); - /* skipping wep.reserved */ - DEBUGFS_FWSTATS_ADD(wep, key_not_found); - DEBUGFS_FWSTATS_ADD(wep, decrypt_fail); - DEBUGFS_FWSTATS_ADD(wep, packets); - DEBUGFS_FWSTATS_ADD(wep, interrupt); - - DEBUGFS_FWSTATS_ADD(pwr, ps_enter); - DEBUGFS_FWSTATS_ADD(pwr, elp_enter); - DEBUGFS_FWSTATS_ADD(pwr, missing_bcns); - DEBUGFS_FWSTATS_ADD(pwr, wake_on_host); - DEBUGFS_FWSTATS_ADD(pwr, wake_on_timer_exp); - DEBUGFS_FWSTATS_ADD(pwr, tx_with_ps); - DEBUGFS_FWSTATS_ADD(pwr, tx_without_ps); - DEBUGFS_FWSTATS_ADD(pwr, rcvd_beacons); - DEBUGFS_FWSTATS_ADD(pwr, power_save_off); - DEBUGFS_FWSTATS_ADD(pwr, enable_ps); - DEBUGFS_FWSTATS_ADD(pwr, disable_ps); - DEBUGFS_FWSTATS_ADD(pwr, fix_tsf_ps); - /* skipping cont_miss_bcns_spread for now */ - DEBUGFS_FWSTATS_ADD(pwr, rcvd_awake_beacons); - - DEBUGFS_FWSTATS_ADD(mic, rx_pkts); - DEBUGFS_FWSTATS_ADD(mic, calc_failure); - - DEBUGFS_FWSTATS_ADD(aes, encrypt_fail); - DEBUGFS_FWSTATS_ADD(aes, decrypt_fail); - DEBUGFS_FWSTATS_ADD(aes, encrypt_packets); - DEBUGFS_FWSTATS_ADD(aes, decrypt_packets); - DEBUGFS_FWSTATS_ADD(aes, encrypt_interrupt); - DEBUGFS_FWSTATS_ADD(aes, decrypt_interrupt); - - DEBUGFS_FWSTATS_ADD(event, heart_beat); - DEBUGFS_FWSTATS_ADD(event, calibration); - DEBUGFS_FWSTATS_ADD(event, rx_mismatch); - DEBUGFS_FWSTATS_ADD(event, rx_mem_empty); - DEBUGFS_FWSTATS_ADD(event, rx_pool); - DEBUGFS_FWSTATS_ADD(event, oom_late); - DEBUGFS_FWSTATS_ADD(event, phy_transmit_error); - DEBUGFS_FWSTATS_ADD(event, tx_stuck); - - DEBUGFS_FWSTATS_ADD(ps, pspoll_timeouts); - DEBUGFS_FWSTATS_ADD(ps, upsd_timeouts); - DEBUGFS_FWSTATS_ADD(ps, upsd_max_sptime); - DEBUGFS_FWSTATS_ADD(ps, upsd_max_apturn); - DEBUGFS_FWSTATS_ADD(ps, pspoll_max_apturn); - DEBUGFS_FWSTATS_ADD(ps, pspoll_utilization); - DEBUGFS_FWSTATS_ADD(ps, upsd_utilization); - - DEBUGFS_FWSTATS_ADD(rxpipe, rx_prep_beacon_drop); - DEBUGFS_FWSTATS_ADD(rxpipe, descr_host_int_trig_rx_data); - DEBUGFS_FWSTATS_ADD(rxpipe, beacon_buffer_thres_host_int_trig_rx_data); - DEBUGFS_FWSTATS_ADD(rxpipe, missed_beacon_host_int_trig_rx_data); - DEBUGFS_FWSTATS_ADD(rxpipe, tx_xfr_host_int_trig_rx_data); - - DEBUGFS_ADD(tx_queue_len, wl->debugfs.rootdir); - DEBUGFS_ADD(retry_count, wl->debugfs.rootdir); - DEBUGFS_ADD(excessive_retries, wl->debugfs.rootdir); - - DEBUGFS_ADD(gpio_power, wl->debugfs.rootdir); - -out: - if (ret < 0) - wl1271_debugfs_delete_files(wl); - - return ret; -} - -void wl1271_debugfs_reset(struct wl1271 *wl) -{ - memset(wl->stats.fw_stats, 0, sizeof(*wl->stats.fw_stats)); - wl->stats.retry_count = 0; - wl->stats.excessive_retries = 0; -} - -int wl1271_debugfs_init(struct wl1271 *wl) -{ - int ret; - - wl->debugfs.rootdir = debugfs_create_dir(KBUILD_MODNAME, NULL); - - if (IS_ERR(wl->debugfs.rootdir)) { - ret = PTR_ERR(wl->debugfs.rootdir); - wl->debugfs.rootdir = NULL; - goto err; - } - - wl->debugfs.fw_statistics = debugfs_create_dir("fw-statistics", - wl->debugfs.rootdir); - - if (IS_ERR(wl->debugfs.fw_statistics)) { - ret = PTR_ERR(wl->debugfs.fw_statistics); - wl->debugfs.fw_statistics = NULL; - goto err_root; - } - - wl->stats.fw_stats = kzalloc(sizeof(*wl->stats.fw_stats), - GFP_KERNEL); - - if (!wl->stats.fw_stats) { - ret = -ENOMEM; - goto err_fw; - } - - wl->stats.fw_stats_update = jiffies; - - ret = wl1271_debugfs_add_files(wl); - - if (ret < 0) - goto err_file; - - return 0; - -err_file: - kfree(wl->stats.fw_stats); - wl->stats.fw_stats = NULL; - -err_fw: - debugfs_remove(wl->debugfs.fw_statistics); - wl->debugfs.fw_statistics = NULL; - -err_root: - debugfs_remove(wl->debugfs.rootdir); - wl->debugfs.rootdir = NULL; - -err: - return ret; -} - -void wl1271_debugfs_exit(struct wl1271 *wl) -{ - wl1271_debugfs_delete_files(wl); - - kfree(wl->stats.fw_stats); - wl->stats.fw_stats = NULL; - - debugfs_remove(wl->debugfs.fw_statistics); - wl->debugfs.fw_statistics = NULL; - - debugfs_remove(wl->debugfs.rootdir); - wl->debugfs.rootdir = NULL; - -} diff --git a/drivers/net/wireless/wl12xx/wl1271_debugfs.h b/drivers/net/wireless/wl12xx/wl1271_debugfs.h deleted file mode 100644 index 00a45b2669a..00000000000 --- a/drivers/net/wireless/wl12xx/wl1271_debugfs.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * This file is part of wl1271 - * - * Copyright (C) 2009 Nokia Corporation - * - * Contact: Luciano Coelho - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef WL1271_DEBUGFS_H -#define WL1271_DEBUGFS_H - -#include "wl1271.h" - -int wl1271_debugfs_init(struct wl1271 *wl); -void wl1271_debugfs_exit(struct wl1271 *wl); -void wl1271_debugfs_reset(struct wl1271 *wl); - -#endif /* WL1271_DEBUGFS_H */ diff --git a/drivers/net/wireless/wl12xx/wl1271_event.c b/drivers/net/wireless/wl12xx/wl1271_event.c deleted file mode 100644 index 38ccef7d73a..00000000000 --- a/drivers/net/wireless/wl12xx/wl1271_event.c +++ /dev/null @@ -1,293 +0,0 @@ -/* - * This file is part of wl1271 - * - * Copyright (C) 2008-2009 Nokia Corporation - * - * Contact: Luciano Coelho - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include "wl1271.h" -#include "wl1271_reg.h" -#include "wl1271_io.h" -#include "wl1271_event.h" -#include "wl1271_ps.h" -#include "wl1271_scan.h" -#include "wl12xx_80211.h" - -void wl1271_pspoll_work(struct work_struct *work) -{ - struct delayed_work *dwork; - struct wl1271 *wl; - - dwork = container_of(work, struct delayed_work, work); - wl = container_of(dwork, struct wl1271, pspoll_work); - - wl1271_debug(DEBUG_EVENT, "pspoll work"); - - mutex_lock(&wl->mutex); - - if (unlikely(wl->state == WL1271_STATE_OFF)) - goto out; - - if (!test_and_clear_bit(WL1271_FLAG_PSPOLL_FAILURE, &wl->flags)) - goto out; - - if (!test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags)) - goto out; - - /* - * if we end up here, then we were in powersave when the pspoll - * delivery failure occurred, and no-one changed state since, so - * we should go back to powersave. - */ - wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE, wl->basic_rate, true); - -out: - mutex_unlock(&wl->mutex); -}; - -static void wl1271_event_pspoll_delivery_fail(struct wl1271 *wl) -{ - int delay = wl->conf.conn.ps_poll_recovery_period; - int ret; - - wl->ps_poll_failures++; - if (wl->ps_poll_failures == 1) - wl1271_info("AP with dysfunctional ps-poll, " - "trying to work around it."); - - /* force active mode receive data from the AP */ - if (test_bit(WL1271_FLAG_PSM, &wl->flags)) { - ret = wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE, - wl->basic_rate, true); - if (ret < 0) - return; - set_bit(WL1271_FLAG_PSPOLL_FAILURE, &wl->flags); - ieee80211_queue_delayed_work(wl->hw, &wl->pspoll_work, - msecs_to_jiffies(delay)); - } - - /* - * If already in active mode, lets we should be getting data from - * the AP right away. If we enter PSM too fast after this, and data - * remains on the AP, we will get another event like this, and we'll - * go into active once more. - */ -} - -static int wl1271_event_ps_report(struct wl1271 *wl, - struct event_mailbox *mbox, - bool *beacon_loss) -{ - int ret = 0; - u32 total_retries = wl->conf.conn.psm_entry_retries; - - wl1271_debug(DEBUG_EVENT, "ps_status: 0x%x", mbox->ps_status); - - switch (mbox->ps_status) { - case EVENT_ENTER_POWER_SAVE_FAIL: - wl1271_debug(DEBUG_PSM, "PSM entry failed"); - - if (!test_bit(WL1271_FLAG_PSM, &wl->flags)) { - /* remain in active mode */ - wl->psm_entry_retry = 0; - break; - } - - if (wl->psm_entry_retry < total_retries) { - wl->psm_entry_retry++; - ret = wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE, - wl->basic_rate, true); - } else { - wl1271_info("No ack to nullfunc from AP."); - wl->psm_entry_retry = 0; - *beacon_loss = true; - } - break; - case EVENT_ENTER_POWER_SAVE_SUCCESS: - wl->psm_entry_retry = 0; - - /* enable beacon filtering */ - ret = wl1271_acx_beacon_filter_opt(wl, true); - if (ret < 0) - break; - - /* enable beacon early termination */ - ret = wl1271_acx_bet_enable(wl, true); - if (ret < 0) - break; - - /* go to extremely low power mode */ - wl1271_ps_elp_sleep(wl); - break; - case EVENT_EXIT_POWER_SAVE_FAIL: - wl1271_debug(DEBUG_PSM, "PSM exit failed"); - - if (test_bit(WL1271_FLAG_PSM, &wl->flags)) { - wl->psm_entry_retry = 0; - break; - } - - /* make sure the firmware goes to active mode - the frame to - be sent next will indicate to the AP, that we are active. */ - ret = wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE, - wl->basic_rate, false); - break; - case EVENT_EXIT_POWER_SAVE_SUCCESS: - default: - break; - } - - return ret; -} - -static void wl1271_event_rssi_trigger(struct wl1271 *wl, - struct event_mailbox *mbox) -{ - enum nl80211_cqm_rssi_threshold_event event; - s8 metric = mbox->rssi_snr_trigger_metric[0]; - - wl1271_debug(DEBUG_EVENT, "RSSI trigger metric: %d", metric); - - if (metric <= wl->rssi_thold) - event = NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW; - else - event = NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH; - - if (event != wl->last_rssi_event) - ieee80211_cqm_rssi_notify(wl->vif, event, GFP_KERNEL); - wl->last_rssi_event = event; -} - -static void wl1271_event_mbox_dump(struct event_mailbox *mbox) -{ - wl1271_debug(DEBUG_EVENT, "MBOX DUMP:"); - wl1271_debug(DEBUG_EVENT, "\tvector: 0x%x", mbox->events_vector); - wl1271_debug(DEBUG_EVENT, "\tmask: 0x%x", mbox->events_mask); -} - -static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox) -{ - int ret; - u32 vector; - bool beacon_loss = false; - - wl1271_event_mbox_dump(mbox); - - vector = le32_to_cpu(mbox->events_vector); - vector &= ~(le32_to_cpu(mbox->events_mask)); - wl1271_debug(DEBUG_EVENT, "vector: 0x%x", vector); - - if (vector & SCAN_COMPLETE_EVENT_ID) { - wl1271_debug(DEBUG_EVENT, "status: 0x%x", - mbox->scheduled_scan_status); - - wl1271_scan_stm(wl); - } - - /* disable dynamic PS when requested by the firmware */ - if (vector & SOFT_GEMINI_SENSE_EVENT_ID && - wl->bss_type == BSS_TYPE_STA_BSS) { - if (mbox->soft_gemini_sense_info) - ieee80211_disable_dyn_ps(wl->vif); - else - ieee80211_enable_dyn_ps(wl->vif); - } - - /* - * The BSS_LOSE_EVENT_ID is only needed while psm (and hence beacon - * filtering) is enabled. Without PSM, the stack will receive all - * beacons and can detect beacon loss by itself. - * - * As there's possibility that the driver disables PSM before receiving - * BSS_LOSE_EVENT, beacon loss has to be reported to the stack. - * - */ - if (vector & BSS_LOSE_EVENT_ID) { - wl1271_info("Beacon loss detected."); - - /* indicate to the stack, that beacons have been lost */ - beacon_loss = true; - } - - if (vector & PS_REPORT_EVENT_ID) { - wl1271_debug(DEBUG_EVENT, "PS_REPORT_EVENT"); - ret = wl1271_event_ps_report(wl, mbox, &beacon_loss); - if (ret < 0) - return ret; - } - - if (vector & PSPOLL_DELIVERY_FAILURE_EVENT_ID) - wl1271_event_pspoll_delivery_fail(wl); - - if (vector & RSSI_SNR_TRIGGER_0_EVENT_ID) { - wl1271_debug(DEBUG_EVENT, "RSSI_SNR_TRIGGER_0_EVENT"); - if (wl->vif) - wl1271_event_rssi_trigger(wl, mbox); - } - - if (wl->vif && beacon_loss) - ieee80211_connection_loss(wl->vif); - - return 0; -} - -int wl1271_event_unmask(struct wl1271 *wl) -{ - int ret; - - ret = wl1271_acx_event_mbox_mask(wl, ~(wl->event_mask)); - if (ret < 0) - return ret; - - return 0; -} - -void wl1271_event_mbox_config(struct wl1271 *wl) -{ - wl->mbox_ptr[0] = wl1271_read32(wl, REG_EVENT_MAILBOX_PTR); - wl->mbox_ptr[1] = wl->mbox_ptr[0] + sizeof(struct event_mailbox); - - wl1271_debug(DEBUG_EVENT, "MBOX ptrs: 0x%x 0x%x", - wl->mbox_ptr[0], wl->mbox_ptr[1]); -} - -int wl1271_event_handle(struct wl1271 *wl, u8 mbox_num) -{ - struct event_mailbox mbox; - int ret; - - wl1271_debug(DEBUG_EVENT, "EVENT on mbox %d", mbox_num); - - if (mbox_num > 1) - return -EINVAL; - - /* first we read the mbox descriptor */ - wl1271_read(wl, wl->mbox_ptr[mbox_num], &mbox, - sizeof(struct event_mailbox), false); - - /* process the descriptor */ - ret = wl1271_event_process(wl, &mbox); - if (ret < 0) - return ret; - - /* then we let the firmware know it can go on...*/ - wl1271_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_EVENT_ACK); - - return 0; -} diff --git a/drivers/net/wireless/wl12xx/wl1271_event.h b/drivers/net/wireless/wl12xx/wl1271_event.h deleted file mode 100644 index e4751667cf5..00000000000 --- a/drivers/net/wireless/wl12xx/wl1271_event.h +++ /dev/null @@ -1,126 +0,0 @@ -/* - * This file is part of wl1271 - * - * Copyright (C) 1998-2009 Texas Instruments. All rights reserved. - * Copyright (C) 2008-2009 Nokia Corporation - * - * Contact: Luciano Coelho - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __WL1271_EVENT_H__ -#define __WL1271_EVENT_H__ - -/* - * Mbox events - * - * The event mechanism is based on a pair of event buffers (buffers A and - * B) at fixed locations in the target's memory. The host processes one - * buffer while the other buffer continues to collect events. If the host - * is not processing events, an interrupt is issued to signal that a buffer - * is ready. Once the host is done with processing events from one buffer, - * it signals the target (with an ACK interrupt) that the event buffer is - * free. - */ - -enum { - RSSI_SNR_TRIGGER_0_EVENT_ID = BIT(0), - RSSI_SNR_TRIGGER_1_EVENT_ID = BIT(1), - RSSI_SNR_TRIGGER_2_EVENT_ID = BIT(2), - RSSI_SNR_TRIGGER_3_EVENT_ID = BIT(3), - RSSI_SNR_TRIGGER_4_EVENT_ID = BIT(4), - RSSI_SNR_TRIGGER_5_EVENT_ID = BIT(5), - RSSI_SNR_TRIGGER_6_EVENT_ID = BIT(6), - RSSI_SNR_TRIGGER_7_EVENT_ID = BIT(7), - MEASUREMENT_START_EVENT_ID = BIT(8), - MEASUREMENT_COMPLETE_EVENT_ID = BIT(9), - SCAN_COMPLETE_EVENT_ID = BIT(10), - SCHEDULED_SCAN_COMPLETE_EVENT_ID = BIT(11), - AP_DISCOVERY_COMPLETE_EVENT_ID = BIT(12), - PS_REPORT_EVENT_ID = BIT(13), - PSPOLL_DELIVERY_FAILURE_EVENT_ID = BIT(14), - DISCONNECT_EVENT_COMPLETE_ID = BIT(15), - JOIN_EVENT_COMPLETE_ID = BIT(16), - CHANNEL_SWITCH_COMPLETE_EVENT_ID = BIT(17), - BSS_LOSE_EVENT_ID = BIT(18), - REGAINED_BSS_EVENT_ID = BIT(19), - ROAMING_TRIGGER_MAX_TX_RETRY_EVENT_ID = BIT(20), - SOFT_GEMINI_SENSE_EVENT_ID = BIT(22), - SOFT_GEMINI_PREDICTION_EVENT_ID = BIT(23), - SOFT_GEMINI_AVALANCHE_EVENT_ID = BIT(24), - PLT_RX_CALIBRATION_COMPLETE_EVENT_ID = BIT(25), - DBG_EVENT_ID = BIT(26), - HEALTH_CHECK_REPLY_EVENT_ID = BIT(27), - PERIODIC_SCAN_COMPLETE_EVENT_ID = BIT(28), - PERIODIC_SCAN_REPORT_EVENT_ID = BIT(29), - BA_SESSION_TEAR_DOWN_EVENT_ID = BIT(30), - EVENT_MBOX_ALL_EVENT_ID = 0x7fffffff, -}; - -enum { - EVENT_ENTER_POWER_SAVE_FAIL = 0, - EVENT_ENTER_POWER_SAVE_SUCCESS, - EVENT_EXIT_POWER_SAVE_FAIL, - EVENT_EXIT_POWER_SAVE_SUCCESS, -}; - -struct event_debug_report { - u8 debug_event_id; - u8 num_params; - __le16 pad; - __le32 report_1; - __le32 report_2; - __le32 report_3; -} __packed; - -#define NUM_OF_RSSI_SNR_TRIGGERS 8 - -struct event_mailbox { - __le32 events_vector; - __le32 events_mask; - __le32 reserved_1; - __le32 reserved_2; - - u8 dbg_event_id; - u8 num_relevant_params; - __le16 reserved_3; - __le32 event_report_p1; - __le32 event_report_p2; - __le32 event_report_p3; - - u8 number_of_scan_results; - u8 scan_tag; - u8 reserved_4[2]; - __le32 compl_scheduled_scan_status; - - __le16 scheduled_scan_attended_channels; - u8 soft_gemini_sense_info; - u8 soft_gemini_protective_info; - s8 rssi_snr_trigger_metric[NUM_OF_RSSI_SNR_TRIGGERS]; - u8 channel_switch_status; - u8 scheduled_scan_status; - u8 ps_status; - - u8 reserved_5[29]; -} __packed; - -int wl1271_event_unmask(struct wl1271 *wl); -void wl1271_event_mbox_config(struct wl1271 *wl); -int wl1271_event_handle(struct wl1271 *wl, u8 mbox); -void wl1271_pspoll_work(struct work_struct *work); - -#endif diff --git a/drivers/net/wireless/wl12xx/wl1271_ini.h b/drivers/net/wireless/wl12xx/wl1271_ini.h deleted file mode 100644 index 2313047d401..00000000000 --- a/drivers/net/wireless/wl12xx/wl1271_ini.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - * This file is part of wl1271 - * - * Copyright (C) 2010 Nokia Corporation - * - * Contact: Luciano Coelho - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __WL1271_INI_H__ -#define __WL1271_INI_H__ - -#define WL1271_INI_MAX_SMART_REFLEX_PARAM 16 - -struct wl1271_ini_general_params { - u8 ref_clock; - u8 settling_time; - u8 clk_valid_on_wakeup; - u8 dc2dc_mode; - u8 dual_mode_select; - u8 tx_bip_fem_auto_detect; - u8 tx_bip_fem_manufacturer; - u8 general_settings; - u8 sr_state; - u8 srf1[WL1271_INI_MAX_SMART_REFLEX_PARAM]; - u8 srf2[WL1271_INI_MAX_SMART_REFLEX_PARAM]; - u8 srf3[WL1271_INI_MAX_SMART_REFLEX_PARAM]; -} __packed; - -#define WL1271_INI_RSSI_PROCESS_COMPENS_SIZE 15 - -struct wl1271_ini_band_params_2 { - u8 rx_trace_insertion_loss; - u8 tx_trace_loss; - u8 rx_rssi_process_compens[WL1271_INI_RSSI_PROCESS_COMPENS_SIZE]; -} __packed; - -#define WL1271_INI_RATE_GROUP_COUNT 6 -#define WL1271_INI_CHANNEL_COUNT_2 14 - -struct wl1271_ini_fem_params_2 { - __le16 tx_bip_ref_pd_voltage; - u8 tx_bip_ref_power; - u8 tx_bip_ref_offset; - u8 tx_per_rate_pwr_limits_normal[WL1271_INI_RATE_GROUP_COUNT]; - u8 tx_per_rate_pwr_limits_degraded[WL1271_INI_RATE_GROUP_COUNT]; - u8 tx_per_rate_pwr_limits_extreme[WL1271_INI_RATE_GROUP_COUNT]; - u8 tx_per_chan_pwr_limits_11b[WL1271_INI_CHANNEL_COUNT_2]; - u8 tx_per_chan_pwr_limits_ofdm[WL1271_INI_CHANNEL_COUNT_2]; - u8 tx_pd_vs_rate_offsets[WL1271_INI_RATE_GROUP_COUNT]; - u8 tx_ibias[WL1271_INI_RATE_GROUP_COUNT]; - u8 rx_fem_insertion_loss; - u8 degraded_low_to_normal_thr; - u8 normal_to_degraded_high_thr; -} __packed; - -#define WL1271_INI_CHANNEL_COUNT_5 35 -#define WL1271_INI_SUB_BAND_COUNT_5 7 - -struct wl1271_ini_band_params_5 { - u8 rx_trace_insertion_loss[WL1271_INI_SUB_BAND_COUNT_5]; - u8 tx_trace_loss[WL1271_INI_SUB_BAND_COUNT_5]; - u8 rx_rssi_process_compens[WL1271_INI_RSSI_PROCESS_COMPENS_SIZE]; -} __packed; - -struct wl1271_ini_fem_params_5 { - __le16 tx_bip_ref_pd_voltage[WL1271_INI_SUB_BAND_COUNT_5]; - u8 tx_bip_ref_power[WL1271_INI_SUB_BAND_COUNT_5]; - u8 tx_bip_ref_offset[WL1271_INI_SUB_BAND_COUNT_5]; - u8 tx_per_rate_pwr_limits_normal[WL1271_INI_RATE_GROUP_COUNT]; - u8 tx_per_rate_pwr_limits_degraded[WL1271_INI_RATE_GROUP_COUNT]; - u8 tx_per_rate_pwr_limits_extreme[WL1271_INI_RATE_GROUP_COUNT]; - u8 tx_per_chan_pwr_limits_ofdm[WL1271_INI_CHANNEL_COUNT_5]; - u8 tx_pd_vs_rate_offsets[WL1271_INI_RATE_GROUP_COUNT]; - u8 tx_ibias[WL1271_INI_RATE_GROUP_COUNT]; - u8 rx_fem_insertion_loss[WL1271_INI_SUB_BAND_COUNT_5]; - u8 degraded_low_to_normal_thr; - u8 normal_to_degraded_high_thr; -} __packed; - - -/* NVS data structure */ -#define WL1271_INI_NVS_SECTION_SIZE 468 -#define WL1271_INI_FEM_MODULE_COUNT 2 - -#define WL1271_INI_LEGACY_NVS_FILE_SIZE 800 - -struct wl1271_nvs_file { - /* NVS section */ - u8 nvs[WL1271_INI_NVS_SECTION_SIZE]; - - /* INI section */ - struct wl1271_ini_general_params general_params; - u8 padding1; - struct wl1271_ini_band_params_2 stat_radio_params_2; - u8 padding2; - struct { - struct wl1271_ini_fem_params_2 params; - u8 padding; - } dyn_radio_params_2[WL1271_INI_FEM_MODULE_COUNT]; - struct wl1271_ini_band_params_5 stat_radio_params_5; - u8 padding3; - struct { - struct wl1271_ini_fem_params_5 params; - u8 padding; - } dyn_radio_params_5[WL1271_INI_FEM_MODULE_COUNT]; -} __packed; - -#endif diff --git a/drivers/net/wireless/wl12xx/wl1271_init.c b/drivers/net/wireless/wl12xx/wl1271_init.c deleted file mode 100644 index 8044bba70ee..00000000000 --- a/drivers/net/wireless/wl12xx/wl1271_init.c +++ /dev/null @@ -1,369 +0,0 @@ -/* - * This file is part of wl1271 - * - * Copyright (C) 2009 Nokia Corporation - * - * Contact: Luciano Coelho - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include -#include -#include - -#include "wl1271_init.h" -#include "wl12xx_80211.h" -#include "wl1271_acx.h" -#include "wl1271_cmd.h" -#include "wl1271_reg.h" - -static int wl1271_init_hwenc_config(struct wl1271 *wl) -{ - int ret; - - ret = wl1271_acx_feature_cfg(wl); - if (ret < 0) { - wl1271_warning("couldn't set feature config"); - return ret; - } - - ret = wl1271_cmd_set_default_wep_key(wl, wl->default_key); - if (ret < 0) { - wl1271_warning("couldn't set default key"); - return ret; - } - - return 0; -} - -int wl1271_init_templates_config(struct wl1271 *wl) -{ - int ret, i; - size_t size; - - /* send empty templates for fw memory reservation */ - ret = wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_2_4, NULL, - sizeof(struct wl12xx_probe_req_template), - 0, WL1271_RATE_AUTOMATIC); - if (ret < 0) - return ret; - - size = sizeof(struct wl12xx_probe_req_template); - ret = wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_5, - NULL, size, 0, - WL1271_RATE_AUTOMATIC); - if (ret < 0) - return ret; - - ret = wl1271_cmd_template_set(wl, CMD_TEMPL_NULL_DATA, NULL, - sizeof(struct wl12xx_null_data_template), - 0, WL1271_RATE_AUTOMATIC); - if (ret < 0) - return ret; - - ret = wl1271_cmd_template_set(wl, CMD_TEMPL_PS_POLL, NULL, - sizeof(struct wl12xx_ps_poll_template), - 0, WL1271_RATE_AUTOMATIC); - if (ret < 0) - return ret; - - ret = wl1271_cmd_template_set(wl, CMD_TEMPL_QOS_NULL_DATA, NULL, - sizeof - (struct wl12xx_qos_null_data_template), - 0, WL1271_RATE_AUTOMATIC); - if (ret < 0) - return ret; - - ret = wl1271_cmd_template_set(wl, CMD_TEMPL_PROBE_RESPONSE, NULL, - sizeof - (struct wl12xx_probe_resp_template), - 0, WL1271_RATE_AUTOMATIC); - if (ret < 0) - return ret; - - ret = wl1271_cmd_template_set(wl, CMD_TEMPL_BEACON, NULL, - sizeof - (struct wl12xx_beacon_template), - 0, WL1271_RATE_AUTOMATIC); - if (ret < 0) - return ret; - - for (i = 0; i < CMD_TEMPL_KLV_IDX_MAX; i++) { - ret = wl1271_cmd_template_set(wl, CMD_TEMPL_KLV, NULL, - WL1271_CMD_TEMPL_MAX_SIZE, i, - WL1271_RATE_AUTOMATIC); - if (ret < 0) - return ret; - } - - return 0; -} - -static int wl1271_init_rx_config(struct wl1271 *wl, u32 config, u32 filter) -{ - int ret; - - ret = wl1271_acx_rx_msdu_life_time(wl); - if (ret < 0) - return ret; - - ret = wl1271_acx_rx_config(wl, config, filter); - if (ret < 0) - return ret; - - return 0; -} - -int wl1271_init_phy_config(struct wl1271 *wl) -{ - int ret; - - ret = wl1271_acx_pd_threshold(wl); - if (ret < 0) - return ret; - - ret = wl1271_acx_slot(wl, DEFAULT_SLOT_TIME); - if (ret < 0) - return ret; - - ret = wl1271_acx_group_address_tbl(wl, true, NULL, 0); - if (ret < 0) - return ret; - - ret = wl1271_acx_service_period_timeout(wl); - if (ret < 0) - return ret; - - ret = wl1271_acx_rts_threshold(wl, wl->conf.rx.rts_threshold); - if (ret < 0) - return ret; - - return 0; -} - -static int wl1271_init_beacon_filter(struct wl1271 *wl) -{ - int ret; - - /* disable beacon filtering at this stage */ - ret = wl1271_acx_beacon_filter_opt(wl, false); - if (ret < 0) - return ret; - - ret = wl1271_acx_beacon_filter_table(wl); - if (ret < 0) - return ret; - - return 0; -} - -int wl1271_init_pta(struct wl1271 *wl) -{ - int ret; - - ret = wl1271_acx_sg_cfg(wl); - if (ret < 0) - return ret; - - ret = wl1271_acx_sg_enable(wl, wl->sg_enabled); - if (ret < 0) - return ret; - - return 0; -} - -int wl1271_init_energy_detection(struct wl1271 *wl) -{ - int ret; - - ret = wl1271_acx_cca_threshold(wl); - if (ret < 0) - return ret; - - return 0; -} - -static int wl1271_init_beacon_broadcast(struct wl1271 *wl) -{ - int ret; - - ret = wl1271_acx_bcn_dtim_options(wl); - if (ret < 0) - return ret; - - return 0; -} - -int wl1271_hw_init(struct wl1271 *wl) -{ - struct conf_tx_ac_category *conf_ac; - struct conf_tx_tid *conf_tid; - int ret, i; - - ret = wl1271_cmd_general_parms(wl); - if (ret < 0) - return ret; - - ret = wl1271_cmd_radio_parms(wl); - if (ret < 0) - return ret; - - ret = wl1271_cmd_ext_radio_parms(wl); - if (ret < 0) - return ret; - - /* Template settings */ - ret = wl1271_init_templates_config(wl); - if (ret < 0) - return ret; - - /* Default memory configuration */ - ret = wl1271_acx_init_mem_config(wl); - if (ret < 0) - return ret; - - /* RX config */ - ret = wl1271_init_rx_config(wl, - RX_CFG_PROMISCUOUS | RX_CFG_TSF, - RX_FILTER_OPTION_DEF); - /* RX_CONFIG_OPTION_ANY_DST_ANY_BSS, - RX_FILTER_OPTION_FILTER_ALL); */ - if (ret < 0) - goto out_free_memmap; - - /* PHY layer config */ - ret = wl1271_init_phy_config(wl); - if (ret < 0) - goto out_free_memmap; - - ret = wl1271_acx_dco_itrim_params(wl); - if (ret < 0) - goto out_free_memmap; - - /* Initialize connection monitoring thresholds */ - ret = wl1271_acx_conn_monit_params(wl, false); - if (ret < 0) - goto out_free_memmap; - - /* Beacon filtering */ - ret = wl1271_init_beacon_filter(wl); - if (ret < 0) - goto out_free_memmap; - - /* Configure TX patch complete interrupt behavior */ - ret = wl1271_acx_tx_config_options(wl); - if (ret < 0) - goto out_free_memmap; - - /* RX complete interrupt pacing */ - ret = wl1271_acx_init_rx_interrupt(wl); - if (ret < 0) - goto out_free_memmap; - - /* Bluetooth WLAN coexistence */ - ret = wl1271_init_pta(wl); - if (ret < 0) - goto out_free_memmap; - - /* Energy detection */ - ret = wl1271_init_energy_detection(wl); - if (ret < 0) - goto out_free_memmap; - - /* Beacons and boradcast settings */ - ret = wl1271_init_beacon_broadcast(wl); - if (ret < 0) - goto out_free_memmap; - - /* Default fragmentation threshold */ - ret = wl1271_acx_frag_threshold(wl); - if (ret < 0) - goto out_free_memmap; - - /* Default TID/AC configuration */ - BUG_ON(wl->conf.tx.tid_conf_count != wl->conf.tx.ac_conf_count); - for (i = 0; i < wl->conf.tx.tid_conf_count; i++) { - conf_ac = &wl->conf.tx.ac_conf[i]; - ret = wl1271_acx_ac_cfg(wl, conf_ac->ac, conf_ac->cw_min, - conf_ac->cw_max, conf_ac->aifsn, - conf_ac->tx_op_limit); - if (ret < 0) - goto out_free_memmap; - - conf_tid = &wl->conf.tx.tid_conf[i]; - ret = wl1271_acx_tid_cfg(wl, conf_tid->queue_id, - conf_tid->channel_type, - conf_tid->tsid, - conf_tid->ps_scheme, - conf_tid->ack_policy, - conf_tid->apsd_conf[0], - conf_tid->apsd_conf[1]); - if (ret < 0) - goto out_free_memmap; - } - - /* Configure TX rate classes */ - ret = wl1271_acx_rate_policies(wl); - if (ret < 0) - goto out_free_memmap; - - /* Enable data path */ - ret = wl1271_cmd_data_path(wl, 1); - if (ret < 0) - goto out_free_memmap; - - /* Configure for ELP power saving */ - ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_ELP); - if (ret < 0) - goto out_free_memmap; - - /* Configure HW encryption */ - ret = wl1271_init_hwenc_config(wl); - if (ret < 0) - goto out_free_memmap; - - /* configure PM */ - ret = wl1271_acx_pm_config(wl); - if (ret < 0) - goto out_free_memmap; - - /* disable all keep-alive templates */ - for (i = 0; i < CMD_TEMPL_KLV_IDX_MAX; i++) { - ret = wl1271_acx_keep_alive_config(wl, i, - ACX_KEEP_ALIVE_TPL_INVALID); - if (ret < 0) - goto out_free_memmap; - } - - /* disable the keep-alive feature */ - ret = wl1271_acx_keep_alive_mode(wl, false); - if (ret < 0) - goto out_free_memmap; - - /* Configure rssi/snr averaging weights */ - ret = wl1271_acx_rssi_snr_avg_weights(wl); - if (ret < 0) - goto out_free_memmap; - - return 0; - - out_free_memmap: - kfree(wl->target_mem_map); - wl->target_mem_map = NULL; - - return ret; -} diff --git a/drivers/net/wireless/wl12xx/wl1271_init.h b/drivers/net/wireless/wl12xx/wl1271_init.h deleted file mode 100644 index bc26f8c53b9..00000000000 --- a/drivers/net/wireless/wl12xx/wl1271_init.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * This file is part of wl1271 - * - * Copyright (C) 2009 Nokia Corporation - * - * Contact: Luciano Coelho - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __WL1271_INIT_H__ -#define __WL1271_INIT_H__ - -#include "wl1271.h" - -int wl1271_hw_init_power_auth(struct wl1271 *wl); -int wl1271_init_templates_config(struct wl1271 *wl); -int wl1271_init_phy_config(struct wl1271 *wl); -int wl1271_init_pta(struct wl1271 *wl); -int wl1271_init_energy_detection(struct wl1271 *wl); -int wl1271_hw_init(struct wl1271 *wl); - -#endif diff --git a/drivers/net/wireless/wl12xx/wl1271_io.c b/drivers/net/wireless/wl12xx/wl1271_io.c deleted file mode 100644 index c8759acef13..00000000000 --- a/drivers/net/wireless/wl12xx/wl1271_io.c +++ /dev/null @@ -1,170 +0,0 @@ -/* - * This file is part of wl1271 - * - * Copyright (C) 2008-2010 Nokia Corporation - * - * Contact: Luciano Coelho - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include -#include -#include -#include - -#include "wl1271.h" -#include "wl12xx_80211.h" -#include "wl1271_io.h" - -#define OCP_CMD_LOOP 32 - -#define OCP_CMD_WRITE 0x1 -#define OCP_CMD_READ 0x2 - -#define OCP_READY_MASK BIT(18) -#define OCP_STATUS_MASK (BIT(16) | BIT(17)) - -#define OCP_STATUS_NO_RESP 0x00000 -#define OCP_STATUS_OK 0x10000 -#define OCP_STATUS_REQ_FAILED 0x20000 -#define OCP_STATUS_RESP_ERROR 0x30000 - -void wl1271_disable_interrupts(struct wl1271 *wl) -{ - wl->if_ops->disable_irq(wl); -} - -void wl1271_enable_interrupts(struct wl1271 *wl) -{ - wl->if_ops->enable_irq(wl); -} - -/* Set the SPI partitions to access the chip addresses - * - * To simplify driver code, a fixed (virtual) memory map is defined for - * register and memory addresses. Because in the chipset, in different stages - * of operation, those addresses will move around, an address translation - * mechanism is required. - * - * There are four partitions (three memory and one register partition), - * which are mapped to two different areas of the hardware memory. - * - * Virtual address - * space - * - * | | - * ...+----+--> mem.start - * Physical address ... | | - * space ... | | [PART_0] - * ... | | - * 00000000 <--+----+... ...+----+--> mem.start + mem.size - * | | ... | | - * |MEM | ... | | - * | | ... | | - * mem.size <--+----+... | | {unused area) - * | | ... | | - * |REG | ... | | - * mem.size | | ... | | - * + <--+----+... ...+----+--> reg.start - * reg.size | | ... | | - * |MEM2| ... | | [PART_1] - * | | ... | | - * ...+----+--> reg.start + reg.size - * | | - * - */ -int wl1271_set_partition(struct wl1271 *wl, - struct wl1271_partition_set *p) -{ - /* copy partition info */ - memcpy(&wl->part, p, sizeof(*p)); - - wl1271_debug(DEBUG_SPI, "mem_start %08X mem_size %08X", - p->mem.start, p->mem.size); - wl1271_debug(DEBUG_SPI, "reg_start %08X reg_size %08X", - p->reg.start, p->reg.size); - wl1271_debug(DEBUG_SPI, "mem2_start %08X mem2_size %08X", - p->mem2.start, p->mem2.size); - wl1271_debug(DEBUG_SPI, "mem3_start %08X mem3_size %08X", - p->mem3.start, p->mem3.size); - - /* write partition info to the chipset */ - wl1271_raw_write32(wl, HW_PART0_START_ADDR, p->mem.start); - wl1271_raw_write32(wl, HW_PART0_SIZE_ADDR, p->mem.size); - wl1271_raw_write32(wl, HW_PART1_START_ADDR, p->reg.start); - wl1271_raw_write32(wl, HW_PART1_SIZE_ADDR, p->reg.size); - wl1271_raw_write32(wl, HW_PART2_START_ADDR, p->mem2.start); - wl1271_raw_write32(wl, HW_PART2_SIZE_ADDR, p->mem2.size); - wl1271_raw_write32(wl, HW_PART3_START_ADDR, p->mem3.start); - - return 0; -} - -void wl1271_io_reset(struct wl1271 *wl) -{ - wl->if_ops->reset(wl); -} - -void wl1271_io_init(struct wl1271 *wl) -{ - wl->if_ops->init(wl); -} - -void wl1271_top_reg_write(struct wl1271 *wl, int addr, u16 val) -{ - /* write address >> 1 + 0x30000 to OCP_POR_CTR */ - addr = (addr >> 1) + 0x30000; - wl1271_write32(wl, OCP_POR_CTR, addr); - - /* write value to OCP_POR_WDATA */ - wl1271_write32(wl, OCP_DATA_WRITE, val); - - /* write 1 to OCP_CMD */ - wl1271_write32(wl, OCP_CMD, OCP_CMD_WRITE); -} - -u16 wl1271_top_reg_read(struct wl1271 *wl, int addr) -{ - u32 val; - int timeout = OCP_CMD_LOOP; - - /* write address >> 1 + 0x30000 to OCP_POR_CTR */ - addr = (addr >> 1) + 0x30000; - wl1271_write32(wl, OCP_POR_CTR, addr); - - /* write 2 to OCP_CMD */ - wl1271_write32(wl, OCP_CMD, OCP_CMD_READ); - - /* poll for data ready */ - do { - val = wl1271_read32(wl, OCP_DATA_READ); - } while (!(val & OCP_READY_MASK) && --timeout); - - if (!timeout) { - wl1271_warning("Top register access timed out."); - return 0xffff; - } - - /* check data status and return if OK */ - if ((val & OCP_STATUS_MASK) == OCP_STATUS_OK) - return val & 0xffff; - else { - wl1271_warning("Top register access returned error."); - return 0xffff; - } -} - diff --git a/drivers/net/wireless/wl12xx/wl1271_io.h b/drivers/net/wireless/wl12xx/wl1271_io.h deleted file mode 100644 index c1f92e65ded..00000000000 --- a/drivers/net/wireless/wl12xx/wl1271_io.h +++ /dev/null @@ -1,172 +0,0 @@ -/* - * This file is part of wl1271 - * - * Copyright (C) 1998-2009 Texas Instruments. All rights reserved. - * Copyright (C) 2008-2010 Nokia Corporation - * - * Contact: Luciano Coelho - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __WL1271_IO_H__ -#define __WL1271_IO_H__ - -#include "wl1271_reg.h" - -#define HW_ACCESS_MEMORY_MAX_RANGE 0x1FFC0 - -#define HW_PARTITION_REGISTERS_ADDR 0x1FFC0 -#define HW_PART0_SIZE_ADDR (HW_PARTITION_REGISTERS_ADDR) -#define HW_PART0_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 4) -#define HW_PART1_SIZE_ADDR (HW_PARTITION_REGISTERS_ADDR + 8) -#define HW_PART1_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 12) -#define HW_PART2_SIZE_ADDR (HW_PARTITION_REGISTERS_ADDR + 16) -#define HW_PART2_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 20) -#define HW_PART3_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 24) - -#define HW_ACCESS_REGISTER_SIZE 4 - -#define HW_ACCESS_PRAM_MAX_RANGE 0x3c000 - -struct wl1271; - -void wl1271_disable_interrupts(struct wl1271 *wl); -void wl1271_enable_interrupts(struct wl1271 *wl); - -void wl1271_io_reset(struct wl1271 *wl); -void wl1271_io_init(struct wl1271 *wl); - -static inline struct device *wl1271_wl_to_dev(struct wl1271 *wl) -{ - return wl->if_ops->dev(wl); -} - - -/* Raw target IO, address is not translated */ -static inline void wl1271_raw_write(struct wl1271 *wl, int addr, void *buf, - size_t len, bool fixed) -{ - wl->if_ops->write(wl, addr, buf, len, fixed); -} - -static inline void wl1271_raw_read(struct wl1271 *wl, int addr, void *buf, - size_t len, bool fixed) -{ - wl->if_ops->read(wl, addr, buf, len, fixed); -} - -static inline u32 wl1271_raw_read32(struct wl1271 *wl, int addr) -{ - wl1271_raw_read(wl, addr, &wl->buffer_32, - sizeof(wl->buffer_32), false); - - return le32_to_cpu(wl->buffer_32); -} - -static inline void wl1271_raw_write32(struct wl1271 *wl, int addr, u32 val) -{ - wl->buffer_32 = cpu_to_le32(val); - wl1271_raw_write(wl, addr, &wl->buffer_32, - sizeof(wl->buffer_32), false); -} - -/* Translated target IO */ -static inline int wl1271_translate_addr(struct wl1271 *wl, int addr) -{ - /* - * To translate, first check to which window of addresses the - * particular address belongs. Then subtract the starting address - * of that window from the address. Then, add offset of the - * translated region. - * - * The translated regions occur next to each other in physical device - * memory, so just add the sizes of the preceeding address regions to - * get the offset to the new region. - * - * Currently, only the two first regions are addressed, and the - * assumption is that all addresses will fall into either of those - * two. - */ - if ((addr >= wl->part.reg.start) && - (addr < wl->part.reg.start + wl->part.reg.size)) - return addr - wl->part.reg.start + wl->part.mem.size; - else - return addr - wl->part.mem.start; -} - -static inline void wl1271_read(struct wl1271 *wl, int addr, void *buf, - size_t len, bool fixed) -{ - int physical; - - physical = wl1271_translate_addr(wl, addr); - - wl1271_raw_read(wl, physical, buf, len, fixed); -} - -static inline void wl1271_write(struct wl1271 *wl, int addr, void *buf, - size_t len, bool fixed) -{ - int physical; - - physical = wl1271_translate_addr(wl, addr); - - wl1271_raw_write(wl, physical, buf, len, fixed); -} - -static inline u32 wl1271_read32(struct wl1271 *wl, int addr) -{ - return wl1271_raw_read32(wl, wl1271_translate_addr(wl, addr)); -} - -static inline void wl1271_write32(struct wl1271 *wl, int addr, u32 val) -{ - wl1271_raw_write32(wl, wl1271_translate_addr(wl, addr), val); -} - -static inline void wl1271_power_off(struct wl1271 *wl) -{ - wl->if_ops->power(wl, false); - clear_bit(WL1271_FLAG_GPIO_POWER, &wl->flags); -} - -static inline int wl1271_power_on(struct wl1271 *wl) -{ - int ret = wl->if_ops->power(wl, true); - if (ret == 0) - set_bit(WL1271_FLAG_GPIO_POWER, &wl->flags); - - return ret; -} - - -/* Top Register IO */ -void wl1271_top_reg_write(struct wl1271 *wl, int addr, u16 val); -u16 wl1271_top_reg_read(struct wl1271 *wl, int addr); - -int wl1271_set_partition(struct wl1271 *wl, - struct wl1271_partition_set *p); - -/* Functions from wl1271_main.c */ - -int wl1271_register_hw(struct wl1271 *wl); -void wl1271_unregister_hw(struct wl1271 *wl); -int wl1271_init_ieee80211(struct wl1271 *wl); -struct ieee80211_hw *wl1271_alloc_hw(void); -int wl1271_free_hw(struct wl1271 *wl); - -#endif diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c deleted file mode 100644 index f5b1d19bc88..00000000000 --- a/drivers/net/wireless/wl12xx/wl1271_main.c +++ /dev/null @@ -1,2749 +0,0 @@ -/* - * This file is part of wl1271 - * - * Copyright (C) 2008-2010 Nokia Corporation - * - * Contact: Luciano Coelho - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "wl1271.h" -#include "wl12xx_80211.h" -#include "wl1271_reg.h" -#include "wl1271_io.h" -#include "wl1271_event.h" -#include "wl1271_tx.h" -#include "wl1271_rx.h" -#include "wl1271_ps.h" -#include "wl1271_init.h" -#include "wl1271_debugfs.h" -#include "wl1271_cmd.h" -#include "wl1271_boot.h" -#include "wl1271_testmode.h" -#include "wl1271_scan.h" - -#define WL1271_BOOT_RETRIES 3 - -static struct conf_drv_settings default_conf = { - .sg = { - .params = { - [CONF_SG_BT_PER_THRESHOLD] = 7500, - [CONF_SG_HV3_MAX_OVERRIDE] = 0, - [CONF_SG_BT_NFS_SAMPLE_INTERVAL] = 400, - [CONF_SG_BT_LOAD_RATIO] = 50, - [CONF_SG_AUTO_PS_MODE] = 1, - [CONF_SG_AUTO_SCAN_PROBE_REQ] = 170, - [CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3] = 50, - [CONF_SG_ANTENNA_CONFIGURATION] = 0, - [CONF_SG_BEACON_MISS_PERCENT] = 60, - [CONF_SG_RATE_ADAPT_THRESH] = 12, - [CONF_SG_RATE_ADAPT_SNR] = 0, - [CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR] = 10, - [CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR] = 30, - [CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR] = 8, - [CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR] = 20, - [CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR] = 50, - /* Note: with UPSD, this should be 4 */ - [CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR] = 8, - [CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR] = 7, - [CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR] = 25, - [CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR] = 20, - /* Note: with UPDS, this should be 15 */ - [CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR] = 8, - /* Note: with UPDS, this should be 50 */ - [CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR] = 40, - /* Note: with UPDS, this should be 10 */ - [CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR] = 20, - [CONF_SG_RXT] = 1200, - [CONF_SG_TXT] = 1000, - [CONF_SG_ADAPTIVE_RXT_TXT] = 1, - [CONF_SG_PS_POLL_TIMEOUT] = 10, - [CONF_SG_UPSD_TIMEOUT] = 10, - [CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR] = 7, - [CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR] = 15, - [CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR] = 15, - [CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR] = 8, - [CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR] = 20, - [CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR] = 15, - [CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR] = 20, - [CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR] = 50, - [CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR] = 10, - [CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3] = 200, - [CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP] = 800, - [CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME] = 75, - [CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME] = 15, - [CONF_SG_HV3_MAX_SERVED] = 6, - [CONF_SG_DHCP_TIME] = 5000, - [CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP] = 100, - }, - .state = CONF_SG_PROTECTIVE, - }, - .rx = { - .rx_msdu_life_time = 512000, - .packet_detection_threshold = 0, - .ps_poll_timeout = 15, - .upsd_timeout = 15, - .rts_threshold = 2347, - .rx_cca_threshold = 0, - .irq_blk_threshold = 0xFFFF, - .irq_pkt_threshold = 0, - .irq_timeout = 600, - .queue_type = CONF_RX_QUEUE_TYPE_LOW_PRIORITY, - }, - .tx = { - .tx_energy_detection = 0, - .rc_conf = { - .enabled_rates = 0, - .short_retry_limit = 10, - .long_retry_limit = 10, - .aflags = 0 - }, - .ac_conf_count = 4, - .ac_conf = { - [CONF_TX_AC_BE] = { - .ac = CONF_TX_AC_BE, - .cw_min = 15, - .cw_max = 63, - .aifsn = 3, - .tx_op_limit = 0, - }, - [CONF_TX_AC_BK] = { - .ac = CONF_TX_AC_BK, - .cw_min = 15, - .cw_max = 63, - .aifsn = 7, - .tx_op_limit = 0, - }, - [CONF_TX_AC_VI] = { - .ac = CONF_TX_AC_VI, - .cw_min = 15, - .cw_max = 63, - .aifsn = CONF_TX_AIFS_PIFS, - .tx_op_limit = 3008, - }, - [CONF_TX_AC_VO] = { - .ac = CONF_TX_AC_VO, - .cw_min = 15, - .cw_max = 63, - .aifsn = CONF_TX_AIFS_PIFS, - .tx_op_limit = 1504, - }, - }, - .tid_conf_count = 4, - .tid_conf = { - [CONF_TX_AC_BE] = { - .queue_id = CONF_TX_AC_BE, - .channel_type = CONF_CHANNEL_TYPE_EDCF, - .tsid = CONF_TX_AC_BE, - .ps_scheme = CONF_PS_SCHEME_LEGACY, - .ack_policy = CONF_ACK_POLICY_LEGACY, - .apsd_conf = {0, 0}, - }, - [CONF_TX_AC_BK] = { - .queue_id = CONF_TX_AC_BK, - .channel_type = CONF_CHANNEL_TYPE_EDCF, - .tsid = CONF_TX_AC_BK, - .ps_scheme = CONF_PS_SCHEME_LEGACY, - .ack_policy = CONF_ACK_POLICY_LEGACY, - .apsd_conf = {0, 0}, - }, - [CONF_TX_AC_VI] = { - .queue_id = CONF_TX_AC_VI, - .channel_type = CONF_CHANNEL_TYPE_EDCF, - .tsid = CONF_TX_AC_VI, - .ps_scheme = CONF_PS_SCHEME_LEGACY, - .ack_policy = CONF_ACK_POLICY_LEGACY, - .apsd_conf = {0, 0}, - }, - [CONF_TX_AC_VO] = { - .queue_id = CONF_TX_AC_VO, - .channel_type = CONF_CHANNEL_TYPE_EDCF, - .tsid = CONF_TX_AC_VO, - .ps_scheme = CONF_PS_SCHEME_LEGACY, - .ack_policy = CONF_ACK_POLICY_LEGACY, - .apsd_conf = {0, 0}, - }, - }, - .frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD, - .tx_compl_timeout = 700, - .tx_compl_threshold = 4, - .basic_rate = CONF_HW_BIT_RATE_1MBPS, - .basic_rate_5 = CONF_HW_BIT_RATE_6MBPS, - }, - .conn = { - .wake_up_event = CONF_WAKE_UP_EVENT_DTIM, - .listen_interval = 1, - .bcn_filt_mode = CONF_BCN_FILT_MODE_ENABLED, - .bcn_filt_ie_count = 1, - .bcn_filt_ie = { - [0] = { - .ie = WLAN_EID_CHANNEL_SWITCH, - .rule = CONF_BCN_RULE_PASS_ON_APPEARANCE, - } - }, - .synch_fail_thold = 10, - .bss_lose_timeout = 100, - .beacon_rx_timeout = 10000, - .broadcast_timeout = 20000, - .rx_broadcast_in_ps = 1, - .ps_poll_threshold = 10, - .ps_poll_recovery_period = 700, - .bet_enable = CONF_BET_MODE_ENABLE, - .bet_max_consecutive = 10, - .psm_entry_retries = 5, - .psm_entry_nullfunc_retries = 3, - .psm_entry_hangover_period = 1, - .keep_alive_interval = 55000, - .max_listen_interval = 20, - }, - .itrim = { - .enable = false, - .timeout = 50000, - }, - .pm_config = { - .host_clk_settling_time = 5000, - .host_fast_wakeup_support = false - }, - .roam_trigger = { - .trigger_pacing = 1, - .avg_weight_rssi_beacon = 20, - .avg_weight_rssi_data = 10, - .avg_weight_snr_beacon = 20, - .avg_weight_snr_data = 10 - }, - .scan = { - .min_dwell_time_active = 7500, - .max_dwell_time_active = 30000, - .min_dwell_time_passive = 30000, - .max_dwell_time_passive = 60000, - .num_probe_reqs = 2, - }, - .rf = { - .tx_per_channel_power_compensation_2 = { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - }, - .tx_per_channel_power_compensation_5 = { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - }, - }, -}; - -static void __wl1271_op_remove_interface(struct wl1271 *wl); - - -static void wl1271_device_release(struct device *dev) -{ - -} - -static struct platform_device wl1271_device = { - .name = "wl1271", - .id = -1, - - /* device model insists to have a release function */ - .dev = { - .release = wl1271_device_release, - }, -}; - -static LIST_HEAD(wl_list); - -static int wl1271_dev_notify(struct notifier_block *me, unsigned long what, - void *arg) -{ - struct net_device *dev = arg; - struct wireless_dev *wdev; - struct wiphy *wiphy; - struct ieee80211_hw *hw; - struct wl1271 *wl; - struct wl1271 *wl_temp; - int ret = 0; - - /* Check that this notification is for us. */ - if (what != NETDEV_CHANGE) - return NOTIFY_DONE; - - wdev = dev->ieee80211_ptr; - if (wdev == NULL) - return NOTIFY_DONE; - - wiphy = wdev->wiphy; - if (wiphy == NULL) - return NOTIFY_DONE; - - hw = wiphy_priv(wiphy); - if (hw == NULL) - return NOTIFY_DONE; - - wl_temp = hw->priv; - list_for_each_entry(wl, &wl_list, list) { - if (wl == wl_temp) - break; - } - if (wl != wl_temp) - return NOTIFY_DONE; - - mutex_lock(&wl->mutex); - - if (wl->state == WL1271_STATE_OFF) - goto out; - - if (!test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags)) - goto out; - - ret = wl1271_ps_elp_wakeup(wl, false); - if (ret < 0) - goto out; - - if ((dev->operstate == IF_OPER_UP) && - !test_and_set_bit(WL1271_FLAG_STA_STATE_SENT, &wl->flags)) { - wl1271_cmd_set_sta_state(wl); - wl1271_info("Association completed."); - } - - wl1271_ps_elp_sleep(wl); - -out: - mutex_unlock(&wl->mutex); - - return NOTIFY_OK; -} - -static void wl1271_conf_init(struct wl1271 *wl) -{ - - /* - * This function applies the default configuration to the driver. This - * function is invoked upon driver load (spi probe.) - * - * The configuration is stored in a run-time structure in order to - * facilitate for run-time adjustment of any of the parameters. Making - * changes to the configuration structure will apply the new values on - * the next interface up (wl1271_op_start.) - */ - - /* apply driver default configuration */ - memcpy(&wl->conf, &default_conf, sizeof(default_conf)); -} - - -static int wl1271_plt_init(struct wl1271 *wl) -{ - struct conf_tx_ac_category *conf_ac; - struct conf_tx_tid *conf_tid; - int ret, i; - - ret = wl1271_cmd_general_parms(wl); - if (ret < 0) - return ret; - - ret = wl1271_cmd_radio_parms(wl); - if (ret < 0) - return ret; - - ret = wl1271_cmd_ext_radio_parms(wl); - if (ret < 0) - return ret; - - ret = wl1271_init_templates_config(wl); - if (ret < 0) - return ret; - - ret = wl1271_acx_init_mem_config(wl); - if (ret < 0) - return ret; - - /* PHY layer config */ - ret = wl1271_init_phy_config(wl); - if (ret < 0) - goto out_free_memmap; - - ret = wl1271_acx_dco_itrim_params(wl); - if (ret < 0) - goto out_free_memmap; - - /* Initialize connection monitoring thresholds */ - ret = wl1271_acx_conn_monit_params(wl, false); - if (ret < 0) - goto out_free_memmap; - - /* Bluetooth WLAN coexistence */ - ret = wl1271_init_pta(wl); - if (ret < 0) - goto out_free_memmap; - - /* Energy detection */ - ret = wl1271_init_energy_detection(wl); - if (ret < 0) - goto out_free_memmap; - - /* Default fragmentation threshold */ - ret = wl1271_acx_frag_threshold(wl); - if (ret < 0) - goto out_free_memmap; - - /* Default TID/AC configuration */ - BUG_ON(wl->conf.tx.tid_conf_count != wl->conf.tx.ac_conf_count); - for (i = 0; i < wl->conf.tx.tid_conf_count; i++) { - conf_ac = &wl->conf.tx.ac_conf[i]; - ret = wl1271_acx_ac_cfg(wl, conf_ac->ac, conf_ac->cw_min, - conf_ac->cw_max, conf_ac->aifsn, - conf_ac->tx_op_limit); - if (ret < 0) - goto out_free_memmap; - - conf_tid = &wl->conf.tx.tid_conf[i]; - ret = wl1271_acx_tid_cfg(wl, conf_tid->queue_id, - conf_tid->channel_type, - conf_tid->tsid, - conf_tid->ps_scheme, - conf_tid->ack_policy, - conf_tid->apsd_conf[0], - conf_tid->apsd_conf[1]); - if (ret < 0) - goto out_free_memmap; - } - - /* Enable data path */ - ret = wl1271_cmd_data_path(wl, 1); - if (ret < 0) - goto out_free_memmap; - - /* Configure for CAM power saving (ie. always active) */ - ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_CAM); - if (ret < 0) - goto out_free_memmap; - - /* configure PM */ - ret = wl1271_acx_pm_config(wl); - if (ret < 0) - goto out_free_memmap; - - return 0; - - out_free_memmap: - kfree(wl->target_mem_map); - wl->target_mem_map = NULL; - - return ret; -} - -static void wl1271_fw_status(struct wl1271 *wl, - struct wl1271_fw_status *status) -{ - struct timespec ts; - u32 total = 0; - int i; - - wl1271_raw_read(wl, FW_STATUS_ADDR, status, sizeof(*status), false); - - wl1271_debug(DEBUG_IRQ, "intr: 0x%x (fw_rx_counter = %d, " - "drv_rx_counter = %d, tx_results_counter = %d)", - status->intr, - status->fw_rx_counter, - status->drv_rx_counter, - status->tx_results_counter); - - /* update number of available TX blocks */ - for (i = 0; i < NUM_TX_QUEUES; i++) { - u32 cnt = le32_to_cpu(status->tx_released_blks[i]) - - wl->tx_blocks_freed[i]; - - wl->tx_blocks_freed[i] = - le32_to_cpu(status->tx_released_blks[i]); - wl->tx_blocks_available += cnt; - total += cnt; - } - - /* if more blocks are available now, tx work can be scheduled */ - if (total) - clear_bit(WL1271_FLAG_FW_TX_BUSY, &wl->flags); - - /* update the host-chipset time offset */ - getnstimeofday(&ts); - wl->time_offset = (timespec_to_ns(&ts) >> 10) - - (s64)le32_to_cpu(status->fw_localtime); -} - -#define WL1271_IRQ_MAX_LOOPS 10 - -static void wl1271_irq_work(struct work_struct *work) -{ - int ret; - u32 intr; - int loopcount = WL1271_IRQ_MAX_LOOPS; - unsigned long flags; - struct wl1271 *wl = - container_of(work, struct wl1271, irq_work); - - mutex_lock(&wl->mutex); - - wl1271_debug(DEBUG_IRQ, "IRQ work"); - - if (unlikely(wl->state == WL1271_STATE_OFF)) - goto out; - - ret = wl1271_ps_elp_wakeup(wl, true); - if (ret < 0) - goto out; - - spin_lock_irqsave(&wl->wl_lock, flags); - while (test_bit(WL1271_FLAG_IRQ_PENDING, &wl->flags) && loopcount) { - clear_bit(WL1271_FLAG_IRQ_PENDING, &wl->flags); - spin_unlock_irqrestore(&wl->wl_lock, flags); - loopcount--; - - wl1271_fw_status(wl, wl->fw_status); - intr = le32_to_cpu(wl->fw_status->intr); - if (!intr) { - wl1271_debug(DEBUG_IRQ, "Zero interrupt received."); - spin_lock_irqsave(&wl->wl_lock, flags); - continue; - } - - intr &= WL1271_INTR_MASK; - - if (unlikely(intr & WL1271_ACX_INTR_WATCHDOG)) { - wl1271_error("watchdog interrupt received! " - "starting recovery."); - ieee80211_queue_work(wl->hw, &wl->recovery_work); - - /* restarting the chip. ignore any other interrupt. */ - goto out; - } - - if (intr & WL1271_ACX_INTR_DATA) { - wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_DATA"); - - /* check for tx results */ - if (wl->fw_status->tx_results_counter != - (wl->tx_results_count & 0xff)) - wl1271_tx_complete(wl); - - /* Check if any tx blocks were freed */ - if (!test_bit(WL1271_FLAG_FW_TX_BUSY, &wl->flags) && - !skb_queue_empty(&wl->tx_queue)) { - /* - * In order to avoid starvation of the TX path, - * call the work function directly. - */ - wl1271_tx_work_locked(wl); - } - - wl1271_rx(wl, wl->fw_status); - } - - if (intr & WL1271_ACX_INTR_EVENT_A) { - wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_EVENT_A"); - wl1271_event_handle(wl, 0); - } - - if (intr & WL1271_ACX_INTR_EVENT_B) { - wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_EVENT_B"); - wl1271_event_handle(wl, 1); - } - - if (intr & WL1271_ACX_INTR_INIT_COMPLETE) - wl1271_debug(DEBUG_IRQ, - "WL1271_ACX_INTR_INIT_COMPLETE"); - - if (intr & WL1271_ACX_INTR_HW_AVAILABLE) - wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_HW_AVAILABLE"); - - spin_lock_irqsave(&wl->wl_lock, flags); - } - - if (test_bit(WL1271_FLAG_IRQ_PENDING, &wl->flags)) - ieee80211_queue_work(wl->hw, &wl->irq_work); - else - clear_bit(WL1271_FLAG_IRQ_RUNNING, &wl->flags); - spin_unlock_irqrestore(&wl->wl_lock, flags); - - wl1271_ps_elp_sleep(wl); - -out: - mutex_unlock(&wl->mutex); -} - -static int wl1271_fetch_firmware(struct wl1271 *wl) -{ - const struct firmware *fw; - int ret; - - ret = request_firmware(&fw, WL1271_FW_NAME, wl1271_wl_to_dev(wl)); - - if (ret < 0) { - wl1271_error("could not get firmware: %d", ret); - return ret; - } - - if (fw->size % 4) { - wl1271_error("firmware size is not multiple of 32 bits: %zu", - fw->size); - ret = -EILSEQ; - goto out; - } - - wl->fw_len = fw->size; - wl->fw = vmalloc(wl->fw_len); - - if (!wl->fw) { - wl1271_error("could not allocate memory for the firmware"); - ret = -ENOMEM; - goto out; - } - - memcpy(wl->fw, fw->data, wl->fw_len); - - ret = 0; - -out: - release_firmware(fw); - - return ret; -} - -static int wl1271_fetch_nvs(struct wl1271 *wl) -{ - const struct firmware *fw; - int ret; - - ret = request_firmware(&fw, WL1271_NVS_NAME, wl1271_wl_to_dev(wl)); - - if (ret < 0) { - wl1271_error("could not get nvs file: %d", ret); - return ret; - } - - wl->nvs = kmemdup(fw->data, sizeof(struct wl1271_nvs_file), GFP_KERNEL); - - if (!wl->nvs) { - wl1271_error("could not allocate memory for the nvs file"); - ret = -ENOMEM; - goto out; - } - - wl->nvs_len = fw->size; - -out: - release_firmware(fw); - - return ret; -} - -static void wl1271_recovery_work(struct work_struct *work) -{ - struct wl1271 *wl = - container_of(work, struct wl1271, recovery_work); - - mutex_lock(&wl->mutex); - - if (wl->state != WL1271_STATE_ON) - goto out; - - wl1271_info("Hardware recovery in progress."); - - if (test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags)) - ieee80211_connection_loss(wl->vif); - - /* reboot the chipset */ - __wl1271_op_remove_interface(wl); - ieee80211_restart_hw(wl->hw); - -out: - mutex_unlock(&wl->mutex); -} - -static void wl1271_fw_wakeup(struct wl1271 *wl) -{ - u32 elp_reg; - - elp_reg = ELPCTRL_WAKE_UP; - wl1271_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, elp_reg); -} - -static int wl1271_setup(struct wl1271 *wl) -{ - wl->fw_status = kmalloc(sizeof(*wl->fw_status), GFP_KERNEL); - if (!wl->fw_status) - return -ENOMEM; - - wl->tx_res_if = kmalloc(sizeof(*wl->tx_res_if), GFP_KERNEL); - if (!wl->tx_res_if) { - kfree(wl->fw_status); - return -ENOMEM; - } - - return 0; -} - -static int wl1271_chip_wakeup(struct wl1271 *wl) -{ - struct wl1271_partition_set partition; - int ret = 0; - - msleep(WL1271_PRE_POWER_ON_SLEEP); - ret = wl1271_power_on(wl); - if (ret < 0) - goto out; - msleep(WL1271_POWER_ON_SLEEP); - wl1271_io_reset(wl); - wl1271_io_init(wl); - - /* We don't need a real memory partition here, because we only want - * to use the registers at this point. */ - memset(&partition, 0, sizeof(partition)); - partition.reg.start = REGISTERS_BASE; - partition.reg.size = REGISTERS_DOWN_SIZE; - wl1271_set_partition(wl, &partition); - - /* ELP module wake up */ - wl1271_fw_wakeup(wl); - - /* whal_FwCtrl_BootSm() */ - - /* 0. read chip id from CHIP_ID */ - wl->chip.id = wl1271_read32(wl, CHIP_ID_B); - - /* 1. check if chip id is valid */ - - switch (wl->chip.id) { - case CHIP_ID_1271_PG10: - wl1271_warning("chip id 0x%x (1271 PG10) support is obsolete", - wl->chip.id); - - ret = wl1271_setup(wl); - if (ret < 0) - goto out; - break; - case CHIP_ID_1271_PG20: - wl1271_debug(DEBUG_BOOT, "chip id 0x%x (1271 PG20)", - wl->chip.id); - - ret = wl1271_setup(wl); - if (ret < 0) - goto out; - break; - default: - wl1271_warning("unsupported chip id: 0x%x", wl->chip.id); - ret = -ENODEV; - goto out; - } - - if (wl->fw == NULL) { - ret = wl1271_fetch_firmware(wl); - if (ret < 0) - goto out; - } - - /* No NVS from netlink, try to get it from the filesystem */ - if (wl->nvs == NULL) { - ret = wl1271_fetch_nvs(wl); - if (ret < 0) - goto out; - } - -out: - return ret; -} - -int wl1271_plt_start(struct wl1271 *wl) -{ - int retries = WL1271_BOOT_RETRIES; - int ret; - - mutex_lock(&wl->mutex); - - wl1271_notice("power up"); - - if (wl->state != WL1271_STATE_OFF) { - wl1271_error("cannot go into PLT state because not " - "in off state: %d", wl->state); - ret = -EBUSY; - goto out; - } - - while (retries) { - retries--; - ret = wl1271_chip_wakeup(wl); - if (ret < 0) - goto power_off; - - ret = wl1271_boot(wl); - if (ret < 0) - goto power_off; - - ret = wl1271_plt_init(wl); - if (ret < 0) - goto irq_disable; - - wl->state = WL1271_STATE_PLT; - wl1271_notice("firmware booted in PLT mode (%s)", - wl->chip.fw_ver); - goto out; - -irq_disable: - wl1271_disable_interrupts(wl); - mutex_unlock(&wl->mutex); - /* Unlocking the mutex in the middle of handling is - inherently unsafe. In this case we deem it safe to do, - because we need to let any possibly pending IRQ out of - the system (and while we are WL1271_STATE_OFF the IRQ - work function will not do anything.) Also, any other - possible concurrent operations will fail due to the - current state, hence the wl1271 struct should be safe. */ - cancel_work_sync(&wl->irq_work); - mutex_lock(&wl->mutex); -power_off: - wl1271_power_off(wl); - } - - wl1271_error("firmware boot in PLT mode failed despite %d retries", - WL1271_BOOT_RETRIES); -out: - mutex_unlock(&wl->mutex); - - return ret; -} - -int wl1271_plt_stop(struct wl1271 *wl) -{ - int ret = 0; - - mutex_lock(&wl->mutex); - - wl1271_notice("power down"); - - if (wl->state != WL1271_STATE_PLT) { - wl1271_error("cannot power down because not in PLT " - "state: %d", wl->state); - ret = -EBUSY; - goto out; - } - - wl1271_disable_interrupts(wl); - wl1271_power_off(wl); - - wl->state = WL1271_STATE_OFF; - wl->rx_counter = 0; - -out: - mutex_unlock(&wl->mutex); - - cancel_work_sync(&wl->irq_work); - cancel_work_sync(&wl->recovery_work); - - return ret; -} - -static int wl1271_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb) -{ - struct wl1271 *wl = hw->priv; - struct ieee80211_conf *conf = &hw->conf; - struct ieee80211_tx_info *txinfo = IEEE80211_SKB_CB(skb); - struct ieee80211_sta *sta = txinfo->control.sta; - unsigned long flags; - - /* - * peek into the rates configured in the STA entry. - * The rates set after connection stage, The first block only BG sets: - * the compare is for bit 0-16 of sta_rate_set. The second block add - * HT rates in case of HT supported. - */ - spin_lock_irqsave(&wl->wl_lock, flags); - if (sta && - (sta->supp_rates[conf->channel->band] != - (wl->sta_rate_set & HW_BG_RATES_MASK))) { - wl->sta_rate_set = sta->supp_rates[conf->channel->band]; - set_bit(WL1271_FLAG_STA_RATES_CHANGED, &wl->flags); - } - -#ifdef CONFIG_WL1271_HT - if (sta && - sta->ht_cap.ht_supported && - ((wl->sta_rate_set >> HW_HT_RATES_OFFSET) != - sta->ht_cap.mcs.rx_mask[0])) { - /* Clean MCS bits before setting them */ - wl->sta_rate_set &= HW_BG_RATES_MASK; - wl->sta_rate_set |= - (sta->ht_cap.mcs.rx_mask[0] << HW_HT_RATES_OFFSET); - set_bit(WL1271_FLAG_STA_RATES_CHANGED, &wl->flags); - } -#endif - spin_unlock_irqrestore(&wl->wl_lock, flags); - - /* queue the packet */ - skb_queue_tail(&wl->tx_queue, skb); - - /* - * The chip specific setup must run before the first TX packet - - * before that, the tx_work will not be initialized! - */ - - if (!test_bit(WL1271_FLAG_FW_TX_BUSY, &wl->flags)) - ieee80211_queue_work(wl->hw, &wl->tx_work); - - /* - * The workqueue is slow to process the tx_queue and we need stop - * the queue here, otherwise the queue will get too long. - */ - if (skb_queue_len(&wl->tx_queue) >= WL1271_TX_QUEUE_HIGH_WATERMARK) { - wl1271_debug(DEBUG_TX, "op_tx: stopping queues"); - - spin_lock_irqsave(&wl->wl_lock, flags); - ieee80211_stop_queues(wl->hw); - set_bit(WL1271_FLAG_TX_QUEUE_STOPPED, &wl->flags); - spin_unlock_irqrestore(&wl->wl_lock, flags); - } - - return NETDEV_TX_OK; -} - -static struct notifier_block wl1271_dev_notifier = { - .notifier_call = wl1271_dev_notify, -}; - -static int wl1271_op_start(struct ieee80211_hw *hw) -{ - wl1271_debug(DEBUG_MAC80211, "mac80211 start"); - - /* - * We have to delay the booting of the hardware because - * we need to know the local MAC address before downloading and - * initializing the firmware. The MAC address cannot be changed - * after boot, and without the proper MAC address, the firmware - * will not function properly. - * - * The MAC address is first known when the corresponding interface - * is added. That is where we will initialize the hardware. - */ - - return 0; -} - -static void wl1271_op_stop(struct ieee80211_hw *hw) -{ - wl1271_debug(DEBUG_MAC80211, "mac80211 stop"); -} - -static int wl1271_op_add_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif) -{ - struct wl1271 *wl = hw->priv; - struct wiphy *wiphy = hw->wiphy; - int retries = WL1271_BOOT_RETRIES; - int ret = 0; - bool booted = false; - - wl1271_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %pM", - vif->type, vif->addr); - - mutex_lock(&wl->mutex); - if (wl->vif) { - wl1271_debug(DEBUG_MAC80211, - "multiple vifs are not supported yet"); - ret = -EBUSY; - goto out; - } - - switch (vif->type) { - case NL80211_IFTYPE_STATION: - wl->bss_type = BSS_TYPE_STA_BSS; - wl->set_bss_type = BSS_TYPE_STA_BSS; - break; - case NL80211_IFTYPE_ADHOC: - wl->bss_type = BSS_TYPE_IBSS; - wl->set_bss_type = BSS_TYPE_STA_BSS; - break; - default: - ret = -EOPNOTSUPP; - goto out; - } - - memcpy(wl->mac_addr, vif->addr, ETH_ALEN); - - if (wl->state != WL1271_STATE_OFF) { - wl1271_error("cannot start because not in off state: %d", - wl->state); - ret = -EBUSY; - goto out; - } - - while (retries) { - retries--; - ret = wl1271_chip_wakeup(wl); - if (ret < 0) - goto power_off; - - ret = wl1271_boot(wl); - if (ret < 0) - goto power_off; - - ret = wl1271_hw_init(wl); - if (ret < 0) - goto irq_disable; - - booted = true; - break; - -irq_disable: - wl1271_disable_interrupts(wl); - mutex_unlock(&wl->mutex); - /* Unlocking the mutex in the middle of handling is - inherently unsafe. In this case we deem it safe to do, - because we need to let any possibly pending IRQ out of - the system (and while we are WL1271_STATE_OFF the IRQ - work function will not do anything.) Also, any other - possible concurrent operations will fail due to the - current state, hence the wl1271 struct should be safe. */ - cancel_work_sync(&wl->irq_work); - mutex_lock(&wl->mutex); -power_off: - wl1271_power_off(wl); - } - - if (!booted) { - wl1271_error("firmware boot failed despite %d retries", - WL1271_BOOT_RETRIES); - goto out; - } - - wl->vif = vif; - wl->state = WL1271_STATE_ON; - wl1271_info("firmware booted (%s)", wl->chip.fw_ver); - - /* update hw/fw version info in wiphy struct */ - wiphy->hw_version = wl->chip.id; - strncpy(wiphy->fw_version, wl->chip.fw_ver, - sizeof(wiphy->fw_version)); - -out: - mutex_unlock(&wl->mutex); - - if (!ret) - list_add(&wl->list, &wl_list); - - return ret; -} - -static void __wl1271_op_remove_interface(struct wl1271 *wl) -{ - int i; - - wl1271_debug(DEBUG_MAC80211, "mac80211 remove interface"); - - wl1271_info("down"); - - list_del(&wl->list); - - WARN_ON(wl->state != WL1271_STATE_ON); - - /* enable dyn ps just in case (if left on due to fw crash etc) */ - if (wl->bss_type == BSS_TYPE_STA_BSS) - ieee80211_enable_dyn_ps(wl->vif); - - if (wl->scan.state != WL1271_SCAN_STATE_IDLE) { - wl->scan.state = WL1271_SCAN_STATE_IDLE; - kfree(wl->scan.scanned_ch); - wl->scan.scanned_ch = NULL; - wl->scan.req = NULL; - ieee80211_scan_completed(wl->hw, true); - } - - wl->state = WL1271_STATE_OFF; - - wl1271_disable_interrupts(wl); - - mutex_unlock(&wl->mutex); - - cancel_delayed_work_sync(&wl->scan_complete_work); - cancel_work_sync(&wl->irq_work); - cancel_work_sync(&wl->tx_work); - cancel_delayed_work_sync(&wl->pspoll_work); - cancel_delayed_work_sync(&wl->elp_work); - - mutex_lock(&wl->mutex); - - /* let's notify MAC80211 about the remaining pending TX frames */ - wl1271_tx_reset(wl); - wl1271_power_off(wl); - - memset(wl->bssid, 0, ETH_ALEN); - memset(wl->ssid, 0, IW_ESSID_MAX_SIZE + 1); - wl->ssid_len = 0; - wl->bss_type = MAX_BSS_TYPE; - wl->set_bss_type = MAX_BSS_TYPE; - wl->band = IEEE80211_BAND_2GHZ; - - wl->rx_counter = 0; - wl->psm_entry_retry = 0; - wl->power_level = WL1271_DEFAULT_POWER_LEVEL; - wl->tx_blocks_available = 0; - wl->tx_results_count = 0; - wl->tx_packets_count = 0; - wl->tx_security_last_seq = 0; - wl->tx_security_seq = 0; - wl->time_offset = 0; - wl->session_counter = 0; - wl->rate_set = CONF_TX_RATE_MASK_BASIC; - wl->sta_rate_set = 0; - wl->flags = 0; - wl->vif = NULL; - wl->filters = 0; - - for (i = 0; i < NUM_TX_QUEUES; i++) - wl->tx_blocks_freed[i] = 0; - - wl1271_debugfs_reset(wl); - - kfree(wl->fw_status); - wl->fw_status = NULL; - kfree(wl->tx_res_if); - wl->tx_res_if = NULL; - kfree(wl->target_mem_map); - wl->target_mem_map = NULL; -} - -static void wl1271_op_remove_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif) -{ - struct wl1271 *wl = hw->priv; - - mutex_lock(&wl->mutex); - WARN_ON(wl->vif != vif); - __wl1271_op_remove_interface(wl); - mutex_unlock(&wl->mutex); - - cancel_work_sync(&wl->recovery_work); -} - -static void wl1271_configure_filters(struct wl1271 *wl, unsigned int filters) -{ - wl->rx_config = WL1271_DEFAULT_RX_CONFIG; - wl->rx_filter = WL1271_DEFAULT_RX_FILTER; - - /* combine requested filters with current filter config */ - filters = wl->filters | filters; - - wl1271_debug(DEBUG_FILTERS, "RX filters set: "); - - if (filters & FIF_PROMISC_IN_BSS) { - wl1271_debug(DEBUG_FILTERS, " - FIF_PROMISC_IN_BSS"); - wl->rx_config &= ~CFG_UNI_FILTER_EN; - wl->rx_config |= CFG_BSSID_FILTER_EN; - } - if (filters & FIF_BCN_PRBRESP_PROMISC) { - wl1271_debug(DEBUG_FILTERS, " - FIF_BCN_PRBRESP_PROMISC"); - wl->rx_config &= ~CFG_BSSID_FILTER_EN; - wl->rx_config &= ~CFG_SSID_FILTER_EN; - } - if (filters & FIF_OTHER_BSS) { - wl1271_debug(DEBUG_FILTERS, " - FIF_OTHER_BSS"); - wl->rx_config &= ~CFG_BSSID_FILTER_EN; - } - if (filters & FIF_CONTROL) { - wl1271_debug(DEBUG_FILTERS, " - FIF_CONTROL"); - wl->rx_filter |= CFG_RX_CTL_EN; - } - if (filters & FIF_FCSFAIL) { - wl1271_debug(DEBUG_FILTERS, " - FIF_FCSFAIL"); - wl->rx_filter |= CFG_RX_FCS_ERROR; - } -} - -static int wl1271_dummy_join(struct wl1271 *wl) -{ - int ret = 0; - /* we need to use a dummy BSSID for now */ - static const u8 dummy_bssid[ETH_ALEN] = { 0x0b, 0xad, 0xde, - 0xad, 0xbe, 0xef }; - - memcpy(wl->bssid, dummy_bssid, ETH_ALEN); - - /* pass through frames from all BSS */ - wl1271_configure_filters(wl, FIF_OTHER_BSS); - - ret = wl1271_cmd_join(wl, wl->set_bss_type); - if (ret < 0) - goto out; - - set_bit(WL1271_FLAG_JOINED, &wl->flags); - -out: - return ret; -} - -static int wl1271_join(struct wl1271 *wl, bool set_assoc) -{ - int ret; - - /* - * One of the side effects of the JOIN command is that is clears - * WPA/WPA2 keys from the chipset. Performing a JOIN while associated - * to a WPA/WPA2 access point will therefore kill the data-path. - * Currently there is no supported scenario for JOIN during - * association - if it becomes a supported scenario, the WPA/WPA2 keys - * must be handled somehow. - * - */ - if (test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags)) - wl1271_info("JOIN while associated."); - - if (set_assoc) - set_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags); - - ret = wl1271_cmd_join(wl, wl->set_bss_type); - if (ret < 0) - goto out; - - set_bit(WL1271_FLAG_JOINED, &wl->flags); - - if (!test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags)) - goto out; - - /* - * The join command disable the keep-alive mode, shut down its process, - * and also clear the template config, so we need to reset it all after - * the join. The acx_aid starts the keep-alive process, and the order - * of the commands below is relevant. - */ - ret = wl1271_acx_keep_alive_mode(wl, true); - if (ret < 0) - goto out; - - ret = wl1271_acx_aid(wl, wl->aid); - if (ret < 0) - goto out; - - ret = wl1271_cmd_build_klv_null_data(wl); - if (ret < 0) - goto out; - - ret = wl1271_acx_keep_alive_config(wl, CMD_TEMPL_KLV_IDX_NULL_DATA, - ACX_KEEP_ALIVE_TPL_VALID); - if (ret < 0) - goto out; - -out: - return ret; -} - -static int wl1271_unjoin(struct wl1271 *wl) -{ - int ret; - - /* to stop listening to a channel, we disconnect */ - ret = wl1271_cmd_disconnect(wl); - if (ret < 0) - goto out; - - clear_bit(WL1271_FLAG_JOINED, &wl->flags); - memset(wl->bssid, 0, ETH_ALEN); - - /* stop filterting packets based on bssid */ - wl1271_configure_filters(wl, FIF_OTHER_BSS); - -out: - return ret; -} - -static void wl1271_set_band_rate(struct wl1271 *wl) -{ - if (wl->band == IEEE80211_BAND_2GHZ) - wl->basic_rate_set = wl->conf.tx.basic_rate; - else - wl->basic_rate_set = wl->conf.tx.basic_rate_5; -} - -static u32 wl1271_min_rate_get(struct wl1271 *wl) -{ - int i; - u32 rate = 0; - - if (!wl->basic_rate_set) { - WARN_ON(1); - wl->basic_rate_set = wl->conf.tx.basic_rate; - } - - for (i = 0; !rate; i++) { - if ((wl->basic_rate_set >> i) & 0x1) - rate = 1 << i; - } - - return rate; -} - -static int wl1271_handle_idle(struct wl1271 *wl, bool idle) -{ - int ret; - - if (idle) { - if (test_bit(WL1271_FLAG_JOINED, &wl->flags)) { - ret = wl1271_unjoin(wl); - if (ret < 0) - goto out; - } - wl->rate_set = wl1271_min_rate_get(wl); - wl->sta_rate_set = 0; - ret = wl1271_acx_rate_policies(wl); - if (ret < 0) - goto out; - ret = wl1271_acx_keep_alive_config( - wl, CMD_TEMPL_KLV_IDX_NULL_DATA, - ACX_KEEP_ALIVE_TPL_INVALID); - if (ret < 0) - goto out; - set_bit(WL1271_FLAG_IDLE, &wl->flags); - } else { - /* increment the session counter */ - wl->session_counter++; - if (wl->session_counter >= SESSION_COUNTER_MAX) - wl->session_counter = 0; - ret = wl1271_dummy_join(wl); - if (ret < 0) - goto out; - clear_bit(WL1271_FLAG_IDLE, &wl->flags); - } - -out: - return ret; -} - -static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed) -{ - struct wl1271 *wl = hw->priv; - struct ieee80211_conf *conf = &hw->conf; - int channel, ret = 0; - - channel = ieee80211_frequency_to_channel(conf->channel->center_freq); - - wl1271_debug(DEBUG_MAC80211, "mac80211 config ch %d psm %s power %d %s", - channel, - conf->flags & IEEE80211_CONF_PS ? "on" : "off", - conf->power_level, - conf->flags & IEEE80211_CONF_IDLE ? "idle" : "in use"); - - /* - * mac80211 will go to idle nearly immediately after transmitting some - * frames, such as the deauth. To make sure those frames reach the air, - * wait here until the TX queue is fully flushed. - */ - if ((changed & IEEE80211_CONF_CHANGE_IDLE) && - (conf->flags & IEEE80211_CONF_IDLE)) - wl1271_tx_flush(wl); - - mutex_lock(&wl->mutex); - - if (unlikely(wl->state == WL1271_STATE_OFF)) { - ret = -EAGAIN; - goto out; - } - - ret = wl1271_ps_elp_wakeup(wl, false); - if (ret < 0) - goto out; - - /* if the channel changes while joined, join again */ - if (changed & IEEE80211_CONF_CHANGE_CHANNEL && - ((wl->band != conf->channel->band) || - (wl->channel != channel))) { - wl->band = conf->channel->band; - wl->channel = channel; - - /* - * FIXME: the mac80211 should really provide a fixed rate - * to use here. for now, just use the smallest possible rate - * for the band as a fixed rate for association frames and - * other control messages. - */ - if (!test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags)) - wl1271_set_band_rate(wl); - - wl->basic_rate = wl1271_min_rate_get(wl); - ret = wl1271_acx_rate_policies(wl); - if (ret < 0) - wl1271_warning("rate policy for update channel " - "failed %d", ret); - - if (test_bit(WL1271_FLAG_JOINED, &wl->flags)) { - ret = wl1271_join(wl, false); - if (ret < 0) - wl1271_warning("cmd join to update channel " - "failed %d", ret); - } - } - - if (changed & IEEE80211_CONF_CHANGE_IDLE) { - ret = wl1271_handle_idle(wl, conf->flags & IEEE80211_CONF_IDLE); - if (ret < 0) - wl1271_warning("idle mode change failed %d", ret); - } - - /* - * if mac80211 changes the PSM mode, make sure the mode is not - * incorrectly changed after the pspoll failure active window. - */ - if (changed & IEEE80211_CONF_CHANGE_PS) - clear_bit(WL1271_FLAG_PSPOLL_FAILURE, &wl->flags); - - if (conf->flags & IEEE80211_CONF_PS && - !test_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags)) { - set_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags); - - /* - * We enter PSM only if we're already associated. - * If we're not, we'll enter it when joining an SSID, - * through the bss_info_changed() hook. - */ - if (test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags)) { - wl1271_debug(DEBUG_PSM, "psm enabled"); - ret = wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE, - wl->basic_rate, true); - } - } else if (!(conf->flags & IEEE80211_CONF_PS) && - test_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags)) { - wl1271_debug(DEBUG_PSM, "psm disabled"); - - clear_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags); - - if (test_bit(WL1271_FLAG_PSM, &wl->flags)) - ret = wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE, - wl->basic_rate, true); - } - - if (conf->power_level != wl->power_level) { - ret = wl1271_acx_tx_power(wl, conf->power_level); - if (ret < 0) - goto out_sleep; - - wl->power_level = conf->power_level; - } - -out_sleep: - wl1271_ps_elp_sleep(wl); - -out: - mutex_unlock(&wl->mutex); - - return ret; -} - -struct wl1271_filter_params { - bool enabled; - int mc_list_length; - u8 mc_list[ACX_MC_ADDRESS_GROUP_MAX][ETH_ALEN]; -}; - -static u64 wl1271_op_prepare_multicast(struct ieee80211_hw *hw, - struct netdev_hw_addr_list *mc_list) -{ - struct wl1271_filter_params *fp; - struct netdev_hw_addr *ha; - struct wl1271 *wl = hw->priv; - - if (unlikely(wl->state == WL1271_STATE_OFF)) - return 0; - - fp = kzalloc(sizeof(*fp), GFP_ATOMIC); - if (!fp) { - wl1271_error("Out of memory setting filters."); - return 0; - } - - /* update multicast filtering parameters */ - fp->mc_list_length = 0; - if (netdev_hw_addr_list_count(mc_list) > ACX_MC_ADDRESS_GROUP_MAX) { - fp->enabled = false; - } else { - fp->enabled = true; - netdev_hw_addr_list_for_each(ha, mc_list) { - memcpy(fp->mc_list[fp->mc_list_length], - ha->addr, ETH_ALEN); - fp->mc_list_length++; - } - } - - return (u64)(unsigned long)fp; -} - -#define WL1271_SUPPORTED_FILTERS (FIF_PROMISC_IN_BSS | \ - FIF_ALLMULTI | \ - FIF_FCSFAIL | \ - FIF_BCN_PRBRESP_PROMISC | \ - FIF_CONTROL | \ - FIF_OTHER_BSS) - -static void wl1271_op_configure_filter(struct ieee80211_hw *hw, - unsigned int changed, - unsigned int *total, u64 multicast) -{ - struct wl1271_filter_params *fp = (void *)(unsigned long)multicast; - struct wl1271 *wl = hw->priv; - int ret; - - wl1271_debug(DEBUG_MAC80211, "mac80211 configure filter"); - - mutex_lock(&wl->mutex); - - *total &= WL1271_SUPPORTED_FILTERS; - changed &= WL1271_SUPPORTED_FILTERS; - - if (unlikely(wl->state == WL1271_STATE_OFF)) - goto out; - - ret = wl1271_ps_elp_wakeup(wl, false); - if (ret < 0) - goto out; - - - if (*total & FIF_ALLMULTI) - ret = wl1271_acx_group_address_tbl(wl, false, NULL, 0); - else if (fp) - ret = wl1271_acx_group_address_tbl(wl, fp->enabled, - fp->mc_list, - fp->mc_list_length); - if (ret < 0) - goto out_sleep; - - /* determine, whether supported filter values have changed */ - if (changed == 0) - goto out_sleep; - - /* configure filters */ - wl->filters = *total; - wl1271_configure_filters(wl, 0); - - /* apply configured filters */ - ret = wl1271_acx_rx_config(wl, wl->rx_config, wl->rx_filter); - if (ret < 0) - goto out_sleep; - -out_sleep: - wl1271_ps_elp_sleep(wl); - -out: - mutex_unlock(&wl->mutex); - kfree(fp); -} - -static int wl1271_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, - struct ieee80211_vif *vif, - struct ieee80211_sta *sta, - struct ieee80211_key_conf *key_conf) -{ - struct wl1271 *wl = hw->priv; - const u8 *addr; - int ret; - u32 tx_seq_32 = 0; - u16 tx_seq_16 = 0; - u8 key_type; - - static const u8 bcast_addr[ETH_ALEN] = - { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; - - wl1271_debug(DEBUG_MAC80211, "mac80211 set key"); - - addr = sta ? sta->addr : bcast_addr; - - wl1271_debug(DEBUG_CRYPT, "CMD: 0x%x", cmd); - wl1271_dump(DEBUG_CRYPT, "ADDR: ", addr, ETH_ALEN); - wl1271_debug(DEBUG_CRYPT, "Key: algo:0x%x, id:%d, len:%d flags 0x%x", - key_conf->cipher, key_conf->keyidx, - key_conf->keylen, key_conf->flags); - wl1271_dump(DEBUG_CRYPT, "KEY: ", key_conf->key, key_conf->keylen); - - if (is_zero_ether_addr(addr)) { - /* We dont support TX only encryption */ - ret = -EOPNOTSUPP; - goto out; - } - - mutex_lock(&wl->mutex); - - if (unlikely(wl->state == WL1271_STATE_OFF)) { - ret = -EAGAIN; - goto out_unlock; - } - - ret = wl1271_ps_elp_wakeup(wl, false); - if (ret < 0) - goto out_unlock; - - switch (key_conf->cipher) { - case WLAN_CIPHER_SUITE_WEP40: - case WLAN_CIPHER_SUITE_WEP104: - key_type = KEY_WEP; - - key_conf->hw_key_idx = key_conf->keyidx; - break; - case WLAN_CIPHER_SUITE_TKIP: - key_type = KEY_TKIP; - - key_conf->hw_key_idx = key_conf->keyidx; - tx_seq_32 = WL1271_TX_SECURITY_HI32(wl->tx_security_seq); - tx_seq_16 = WL1271_TX_SECURITY_LO16(wl->tx_security_seq); - break; - case WLAN_CIPHER_SUITE_CCMP: - key_type = KEY_AES; - - key_conf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; - tx_seq_32 = WL1271_TX_SECURITY_HI32(wl->tx_security_seq); - tx_seq_16 = WL1271_TX_SECURITY_LO16(wl->tx_security_seq); - break; - case WL1271_CIPHER_SUITE_GEM: - key_type = KEY_GEM; - tx_seq_32 = WL1271_TX_SECURITY_HI32(wl->tx_security_seq); - tx_seq_16 = WL1271_TX_SECURITY_LO16(wl->tx_security_seq); - break; - default: - wl1271_error("Unknown key algo 0x%x", key_conf->cipher); - - ret = -EOPNOTSUPP; - goto out_sleep; - } - - switch (cmd) { - case SET_KEY: - ret = wl1271_cmd_set_key(wl, KEY_ADD_OR_REPLACE, - key_conf->keyidx, key_type, - key_conf->keylen, key_conf->key, - addr, tx_seq_32, tx_seq_16); - if (ret < 0) { - wl1271_error("Could not add or replace key"); - goto out_sleep; - } - - /* the default WEP key needs to be configured at least once */ - if (key_type == KEY_WEP) { - ret = wl1271_cmd_set_default_wep_key(wl, - wl->default_key); - if (ret < 0) - goto out_sleep; - } - break; - - case DISABLE_KEY: - /* The wl1271 does not allow to remove unicast keys - they - will be cleared automatically on next CMD_JOIN. Ignore the - request silently, as we dont want the mac80211 to emit - an error message. */ - if (!is_broadcast_ether_addr(addr)) - break; - - ret = wl1271_cmd_set_key(wl, KEY_REMOVE, - key_conf->keyidx, key_type, - key_conf->keylen, key_conf->key, - addr, 0, 0); - if (ret < 0) { - wl1271_error("Could not remove key"); - goto out_sleep; - } - break; - - default: - wl1271_error("Unsupported key cmd 0x%x", cmd); - ret = -EOPNOTSUPP; - break; - } - -out_sleep: - wl1271_ps_elp_sleep(wl); - -out_unlock: - mutex_unlock(&wl->mutex); - -out: - return ret; -} - -static int wl1271_op_hw_scan(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct cfg80211_scan_request *req) -{ - struct wl1271 *wl = hw->priv; - int ret; - u8 *ssid = NULL; - size_t len = 0; - - wl1271_debug(DEBUG_MAC80211, "mac80211 hw scan"); - - if (req->n_ssids) { - ssid = req->ssids[0].ssid; - len = req->ssids[0].ssid_len; - } - - mutex_lock(&wl->mutex); - - if (wl->state == WL1271_STATE_OFF) { - /* - * We cannot return -EBUSY here because cfg80211 will expect - * a call to ieee80211_scan_completed if we do - in this case - * there won't be any call. - */ - ret = -EAGAIN; - goto out; - } - - ret = wl1271_ps_elp_wakeup(wl, false); - if (ret < 0) - goto out; - - ret = wl1271_scan(hw->priv, ssid, len, req); - - wl1271_ps_elp_sleep(wl); - -out: - mutex_unlock(&wl->mutex); - - return ret; -} - -static int wl1271_op_set_rts_threshold(struct ieee80211_hw *hw, u32 value) -{ - struct wl1271 *wl = hw->priv; - int ret = 0; - - mutex_lock(&wl->mutex); - - if (unlikely(wl->state == WL1271_STATE_OFF)) { - ret = -EAGAIN; - goto out; - } - - ret = wl1271_ps_elp_wakeup(wl, false); - if (ret < 0) - goto out; - - ret = wl1271_acx_rts_threshold(wl, (u16) value); - if (ret < 0) - wl1271_warning("wl1271_op_set_rts_threshold failed: %d", ret); - - wl1271_ps_elp_sleep(wl); - -out: - mutex_unlock(&wl->mutex); - - return ret; -} - -static void wl1271_ssid_set(struct wl1271 *wl, struct sk_buff *beacon) -{ - u8 *ptr = beacon->data + - offsetof(struct ieee80211_mgmt, u.beacon.variable); - - /* find the location of the ssid in the beacon */ - while (ptr < beacon->data + beacon->len) { - if (ptr[0] == WLAN_EID_SSID) { - wl->ssid_len = ptr[1]; - memcpy(wl->ssid, ptr+2, wl->ssid_len); - return; - } - ptr += ptr[1]; - } - wl1271_error("ad-hoc beacon template has no SSID!\n"); -} - -static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_bss_conf *bss_conf, - u32 changed) -{ - enum wl1271_cmd_ps_mode mode; - struct wl1271 *wl = hw->priv; - struct ieee80211_sta *sta = ieee80211_find_sta(vif, bss_conf->bssid); - bool do_join = false; - bool set_assoc = false; - int ret; - - wl1271_debug(DEBUG_MAC80211, "mac80211 bss info changed"); - - mutex_lock(&wl->mutex); - - if (unlikely(wl->state == WL1271_STATE_OFF)) - goto out; - - ret = wl1271_ps_elp_wakeup(wl, false); - if (ret < 0) - goto out; - - if ((changed & BSS_CHANGED_BEACON_INT) && - (wl->bss_type == BSS_TYPE_IBSS)) { - wl1271_debug(DEBUG_ADHOC, "ad-hoc beacon interval updated: %d", - bss_conf->beacon_int); - - wl->beacon_int = bss_conf->beacon_int; - do_join = true; - } - - if ((changed & BSS_CHANGED_BEACON) && - (wl->bss_type == BSS_TYPE_IBSS)) { - struct sk_buff *beacon = ieee80211_beacon_get(hw, vif); - - wl1271_debug(DEBUG_ADHOC, "ad-hoc beacon updated"); - - if (beacon) { - struct ieee80211_hdr *hdr; - - wl1271_ssid_set(wl, beacon); - ret = wl1271_cmd_template_set(wl, CMD_TEMPL_BEACON, - beacon->data, - beacon->len, 0, - wl1271_min_rate_get(wl)); - - if (ret < 0) { - dev_kfree_skb(beacon); - goto out_sleep; - } - - hdr = (struct ieee80211_hdr *) beacon->data; - hdr->frame_control = cpu_to_le16( - IEEE80211_FTYPE_MGMT | - IEEE80211_STYPE_PROBE_RESP); - - ret = wl1271_cmd_template_set(wl, - CMD_TEMPL_PROBE_RESPONSE, - beacon->data, - beacon->len, 0, - wl1271_min_rate_get(wl)); - dev_kfree_skb(beacon); - if (ret < 0) - goto out_sleep; - - /* Need to update the SSID (for filtering etc) */ - do_join = true; - } - } - - if ((changed & BSS_CHANGED_BEACON_ENABLED) && - (wl->bss_type == BSS_TYPE_IBSS)) { - wl1271_debug(DEBUG_ADHOC, "ad-hoc beaconing: %s", - bss_conf->enable_beacon ? "enabled" : "disabled"); - - if (bss_conf->enable_beacon) - wl->set_bss_type = BSS_TYPE_IBSS; - else - wl->set_bss_type = BSS_TYPE_STA_BSS; - do_join = true; - } - - if (changed & BSS_CHANGED_CQM) { - bool enable = false; - if (bss_conf->cqm_rssi_thold) - enable = true; - ret = wl1271_acx_rssi_snr_trigger(wl, enable, - bss_conf->cqm_rssi_thold, - bss_conf->cqm_rssi_hyst); - if (ret < 0) - goto out; - wl->rssi_thold = bss_conf->cqm_rssi_thold; - } - - if ((changed & BSS_CHANGED_BSSID) && - /* - * Now we know the correct bssid, so we send a new join command - * and enable the BSSID filter - */ - memcmp(wl->bssid, bss_conf->bssid, ETH_ALEN)) { - memcpy(wl->bssid, bss_conf->bssid, ETH_ALEN); - - ret = wl1271_cmd_build_null_data(wl); - if (ret < 0) - goto out_sleep; - - ret = wl1271_build_qos_null_data(wl); - if (ret < 0) - goto out_sleep; - - /* filter out all packets not from this BSSID */ - wl1271_configure_filters(wl, 0); - - /* Need to update the BSSID (for filtering etc) */ - do_join = true; - } - - if (changed & BSS_CHANGED_ASSOC) { - if (bss_conf->assoc) { - u32 rates; - wl->aid = bss_conf->aid; - set_assoc = true; - - wl->ps_poll_failures = 0; - - /* - * use basic rates from AP, and determine lowest rate - * to use with control frames. - */ - rates = bss_conf->basic_rates; - wl->basic_rate_set = wl1271_tx_enabled_rates_get(wl, - rates); - wl->basic_rate = wl1271_min_rate_get(wl); - ret = wl1271_acx_rate_policies(wl); - if (ret < 0) - goto out_sleep; - - /* - * with wl1271, we don't need to update the - * beacon_int and dtim_period, because the firmware - * updates it by itself when the first beacon is - * received after a join. - */ - ret = wl1271_cmd_build_ps_poll(wl, wl->aid); - if (ret < 0) - goto out_sleep; - - /* - * The SSID is intentionally set to NULL here - the - * firmware will set the probe request with a - * broadcast SSID regardless of what we set in the - * template. - */ - ret = wl1271_cmd_build_probe_req(wl, NULL, 0, - NULL, 0, wl->band); - - /* enable the connection monitoring feature */ - ret = wl1271_acx_conn_monit_params(wl, true); - if (ret < 0) - goto out_sleep; - - /* If we want to go in PSM but we're not there yet */ - if (test_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags) && - !test_bit(WL1271_FLAG_PSM, &wl->flags)) { - mode = STATION_POWER_SAVE_MODE; - ret = wl1271_ps_set_mode(wl, mode, - wl->basic_rate, - true); - if (ret < 0) - goto out_sleep; - } - } else { - /* use defaults when not associated */ - clear_bit(WL1271_FLAG_STA_STATE_SENT, &wl->flags); - clear_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags); - wl->aid = 0; - - /* re-enable dynamic ps - just in case */ - ieee80211_enable_dyn_ps(wl->vif); - - /* revert back to minimum rates for the current band */ - wl1271_set_band_rate(wl); - wl->basic_rate = wl1271_min_rate_get(wl); - ret = wl1271_acx_rate_policies(wl); - if (ret < 0) - goto out_sleep; - - /* disable connection monitor features */ - ret = wl1271_acx_conn_monit_params(wl, false); - - /* Disable the keep-alive feature */ - ret = wl1271_acx_keep_alive_mode(wl, false); - - if (ret < 0) - goto out_sleep; - } - - } - - if (changed & BSS_CHANGED_ERP_SLOT) { - if (bss_conf->use_short_slot) - ret = wl1271_acx_slot(wl, SLOT_TIME_SHORT); - else - ret = wl1271_acx_slot(wl, SLOT_TIME_LONG); - if (ret < 0) { - wl1271_warning("Set slot time failed %d", ret); - goto out_sleep; - } - } - - if (changed & BSS_CHANGED_ERP_PREAMBLE) { - if (bss_conf->use_short_preamble) - wl1271_acx_set_preamble(wl, ACX_PREAMBLE_SHORT); - else - wl1271_acx_set_preamble(wl, ACX_PREAMBLE_LONG); - } - - if (changed & BSS_CHANGED_ERP_CTS_PROT) { - if (bss_conf->use_cts_prot) - ret = wl1271_acx_cts_protect(wl, CTSPROTECT_ENABLE); - else - ret = wl1271_acx_cts_protect(wl, CTSPROTECT_DISABLE); - if (ret < 0) { - wl1271_warning("Set ctsprotect failed %d", ret); - goto out_sleep; - } - } - - /* - * Takes care of: New association with HT enable, - * HT information change in beacon. - */ - if (sta && - (changed & BSS_CHANGED_HT) && - (bss_conf->channel_type != NL80211_CHAN_NO_HT)) { - ret = wl1271_acx_set_ht_capabilities(wl, &sta->ht_cap, true); - if (ret < 0) { - wl1271_warning("Set ht cap true failed %d", ret); - goto out_sleep; - } - ret = wl1271_acx_set_ht_information(wl, - bss_conf->ht_operation_mode); - if (ret < 0) { - wl1271_warning("Set ht information failed %d", ret); - goto out_sleep; - } - } - /* - * Takes care of: New association without HT, - * Disassociation. - */ - else if (sta && (changed & BSS_CHANGED_ASSOC)) { - ret = wl1271_acx_set_ht_capabilities(wl, &sta->ht_cap, false); - if (ret < 0) { - wl1271_warning("Set ht cap false failed %d", ret); - goto out_sleep; - } - } - - if (changed & BSS_CHANGED_ARP_FILTER) { - __be32 addr = bss_conf->arp_addr_list[0]; - WARN_ON(wl->bss_type != BSS_TYPE_STA_BSS); - - if (bss_conf->arp_addr_cnt == 1 && bss_conf->arp_filter_enabled) - ret = wl1271_acx_arp_ip_filter(wl, true, addr); - else - ret = wl1271_acx_arp_ip_filter(wl, false, addr); - - if (ret < 0) - goto out_sleep; - } - - if (do_join) { - ret = wl1271_join(wl, set_assoc); - if (ret < 0) { - wl1271_warning("cmd join failed %d", ret); - goto out_sleep; - } - } - -out_sleep: - wl1271_ps_elp_sleep(wl); - -out: - mutex_unlock(&wl->mutex); -} - -static int wl1271_op_conf_tx(struct ieee80211_hw *hw, u16 queue, - const struct ieee80211_tx_queue_params *params) -{ - struct wl1271 *wl = hw->priv; - u8 ps_scheme; - int ret; - - mutex_lock(&wl->mutex); - - wl1271_debug(DEBUG_MAC80211, "mac80211 conf tx %d", queue); - - if (unlikely(wl->state == WL1271_STATE_OFF)) { - ret = -EAGAIN; - goto out; - } - - ret = wl1271_ps_elp_wakeup(wl, false); - if (ret < 0) - goto out; - - /* the txop is confed in units of 32us by the mac80211, we need us */ - ret = wl1271_acx_ac_cfg(wl, wl1271_tx_get_queue(queue), - params->cw_min, params->cw_max, - params->aifs, params->txop << 5); - if (ret < 0) - goto out_sleep; - - if (params->uapsd) - ps_scheme = CONF_PS_SCHEME_UPSD_TRIGGER; - else - ps_scheme = CONF_PS_SCHEME_LEGACY; - - ret = wl1271_acx_tid_cfg(wl, wl1271_tx_get_queue(queue), - CONF_CHANNEL_TYPE_EDCF, - wl1271_tx_get_queue(queue), - ps_scheme, CONF_ACK_POLICY_LEGACY, 0, 0); - if (ret < 0) - goto out_sleep; - -out_sleep: - wl1271_ps_elp_sleep(wl); - -out: - mutex_unlock(&wl->mutex); - - return ret; -} - -static u64 wl1271_op_get_tsf(struct ieee80211_hw *hw) -{ - - struct wl1271 *wl = hw->priv; - u64 mactime = ULLONG_MAX; - int ret; - - wl1271_debug(DEBUG_MAC80211, "mac80211 get tsf"); - - mutex_lock(&wl->mutex); - - if (unlikely(wl->state == WL1271_STATE_OFF)) - goto out; - - ret = wl1271_ps_elp_wakeup(wl, false); - if (ret < 0) - goto out; - - ret = wl1271_acx_tsf_info(wl, &mactime); - if (ret < 0) - goto out_sleep; - -out_sleep: - wl1271_ps_elp_sleep(wl); - -out: - mutex_unlock(&wl->mutex); - return mactime; -} - -static int wl1271_op_get_survey(struct ieee80211_hw *hw, int idx, - struct survey_info *survey) -{ - struct wl1271 *wl = hw->priv; - struct ieee80211_conf *conf = &hw->conf; - - if (idx != 0) - return -ENOENT; - - survey->channel = conf->channel; - survey->filled = SURVEY_INFO_NOISE_DBM; - survey->noise = wl->noise; - - return 0; -} - -/* can't be const, mac80211 writes to this */ -static struct ieee80211_rate wl1271_rates[] = { - { .bitrate = 10, - .hw_value = CONF_HW_BIT_RATE_1MBPS, - .hw_value_short = CONF_HW_BIT_RATE_1MBPS, }, - { .bitrate = 20, - .hw_value = CONF_HW_BIT_RATE_2MBPS, - .hw_value_short = CONF_HW_BIT_RATE_2MBPS, - .flags = IEEE80211_RATE_SHORT_PREAMBLE }, - { .bitrate = 55, - .hw_value = CONF_HW_BIT_RATE_5_5MBPS, - .hw_value_short = CONF_HW_BIT_RATE_5_5MBPS, - .flags = IEEE80211_RATE_SHORT_PREAMBLE }, - { .bitrate = 110, - .hw_value = CONF_HW_BIT_RATE_11MBPS, - .hw_value_short = CONF_HW_BIT_RATE_11MBPS, - .flags = IEEE80211_RATE_SHORT_PREAMBLE }, - { .bitrate = 60, - .hw_value = CONF_HW_BIT_RATE_6MBPS, - .hw_value_short = CONF_HW_BIT_RATE_6MBPS, }, - { .bitrate = 90, - .hw_value = CONF_HW_BIT_RATE_9MBPS, - .hw_value_short = CONF_HW_BIT_RATE_9MBPS, }, - { .bitrate = 120, - .hw_value = CONF_HW_BIT_RATE_12MBPS, - .hw_value_short = CONF_HW_BIT_RATE_12MBPS, }, - { .bitrate = 180, - .hw_value = CONF_HW_BIT_RATE_18MBPS, - .hw_value_short = CONF_HW_BIT_RATE_18MBPS, }, - { .bitrate = 240, - .hw_value = CONF_HW_BIT_RATE_24MBPS, - .hw_value_short = CONF_HW_BIT_RATE_24MBPS, }, - { .bitrate = 360, - .hw_value = CONF_HW_BIT_RATE_36MBPS, - .hw_value_short = CONF_HW_BIT_RATE_36MBPS, }, - { .bitrate = 480, - .hw_value = CONF_HW_BIT_RATE_48MBPS, - .hw_value_short = CONF_HW_BIT_RATE_48MBPS, }, - { .bitrate = 540, - .hw_value = CONF_HW_BIT_RATE_54MBPS, - .hw_value_short = CONF_HW_BIT_RATE_54MBPS, }, -}; - -/* - * Can't be const, mac80211 writes to this. The order of the channels here - * is designed to improve scanning. - */ -static struct ieee80211_channel wl1271_channels[] = { - { .hw_value = 1, .center_freq = 2412, .max_power = 25 }, - { .hw_value = 5, .center_freq = 2432, .max_power = 25 }, - { .hw_value = 9, .center_freq = 2452, .max_power = 25 }, - { .hw_value = 13, .center_freq = 2472, .max_power = 25 }, - { .hw_value = 4, .center_freq = 2427, .max_power = 25 }, - { .hw_value = 8, .center_freq = 2447, .max_power = 25 }, - { .hw_value = 12, .center_freq = 2467, .max_power = 25 }, - { .hw_value = 3, .center_freq = 2422, .max_power = 25 }, - { .hw_value = 7, .center_freq = 2442, .max_power = 25 }, - { .hw_value = 11, .center_freq = 2462, .max_power = 25 }, - { .hw_value = 2, .center_freq = 2417, .max_power = 25 }, - { .hw_value = 6, .center_freq = 2437, .max_power = 25 }, - { .hw_value = 10, .center_freq = 2457, .max_power = 25 }, -}; - -/* mapping to indexes for wl1271_rates */ -static const u8 wl1271_rate_to_idx_2ghz[] = { - /* MCS rates are used only with 11n */ - 7, /* CONF_HW_RXTX_RATE_MCS7 */ - 6, /* CONF_HW_RXTX_RATE_MCS6 */ - 5, /* CONF_HW_RXTX_RATE_MCS5 */ - 4, /* CONF_HW_RXTX_RATE_MCS4 */ - 3, /* CONF_HW_RXTX_RATE_MCS3 */ - 2, /* CONF_HW_RXTX_RATE_MCS2 */ - 1, /* CONF_HW_RXTX_RATE_MCS1 */ - 0, /* CONF_HW_RXTX_RATE_MCS0 */ - - 11, /* CONF_HW_RXTX_RATE_54 */ - 10, /* CONF_HW_RXTX_RATE_48 */ - 9, /* CONF_HW_RXTX_RATE_36 */ - 8, /* CONF_HW_RXTX_RATE_24 */ - - /* TI-specific rate */ - CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_22 */ - - 7, /* CONF_HW_RXTX_RATE_18 */ - 6, /* CONF_HW_RXTX_RATE_12 */ - 3, /* CONF_HW_RXTX_RATE_11 */ - 5, /* CONF_HW_RXTX_RATE_9 */ - 4, /* CONF_HW_RXTX_RATE_6 */ - 2, /* CONF_HW_RXTX_RATE_5_5 */ - 1, /* CONF_HW_RXTX_RATE_2 */ - 0 /* CONF_HW_RXTX_RATE_1 */ -}; - -/* 11n STA capabilities */ -#define HW_RX_HIGHEST_RATE 72 - -#ifdef CONFIG_WL1271_HT -#define WL1271_HT_CAP { \ - .cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20, \ - .ht_supported = true, \ - .ampdu_factor = IEEE80211_HT_MAX_AMPDU_8K, \ - .ampdu_density = IEEE80211_HT_MPDU_DENSITY_8, \ - .mcs = { \ - .rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, }, \ - .rx_highest = cpu_to_le16(HW_RX_HIGHEST_RATE), \ - .tx_params = IEEE80211_HT_MCS_TX_DEFINED, \ - }, \ -} -#else -#define WL1271_HT_CAP { \ - .ht_supported = false, \ -} -#endif - -/* can't be const, mac80211 writes to this */ -static struct ieee80211_supported_band wl1271_band_2ghz = { - .channels = wl1271_channels, - .n_channels = ARRAY_SIZE(wl1271_channels), - .bitrates = wl1271_rates, - .n_bitrates = ARRAY_SIZE(wl1271_rates), - .ht_cap = WL1271_HT_CAP, -}; - -/* 5 GHz data rates for WL1273 */ -static struct ieee80211_rate wl1271_rates_5ghz[] = { - { .bitrate = 60, - .hw_value = CONF_HW_BIT_RATE_6MBPS, - .hw_value_short = CONF_HW_BIT_RATE_6MBPS, }, - { .bitrate = 90, - .hw_value = CONF_HW_BIT_RATE_9MBPS, - .hw_value_short = CONF_HW_BIT_RATE_9MBPS, }, - { .bitrate = 120, - .hw_value = CONF_HW_BIT_RATE_12MBPS, - .hw_value_short = CONF_HW_BIT_RATE_12MBPS, }, - { .bitrate = 180, - .hw_value = CONF_HW_BIT_RATE_18MBPS, - .hw_value_short = CONF_HW_BIT_RATE_18MBPS, }, - { .bitrate = 240, - .hw_value = CONF_HW_BIT_RATE_24MBPS, - .hw_value_short = CONF_HW_BIT_RATE_24MBPS, }, - { .bitrate = 360, - .hw_value = CONF_HW_BIT_RATE_36MBPS, - .hw_value_short = CONF_HW_BIT_RATE_36MBPS, }, - { .bitrate = 480, - .hw_value = CONF_HW_BIT_RATE_48MBPS, - .hw_value_short = CONF_HW_BIT_RATE_48MBPS, }, - { .bitrate = 540, - .hw_value = CONF_HW_BIT_RATE_54MBPS, - .hw_value_short = CONF_HW_BIT_RATE_54MBPS, }, -}; - -/* - * 5 GHz band channels for WL1273 - can't be const, mac80211 writes to this. - * The order of the channels here is designed to improve scanning. - */ -static struct ieee80211_channel wl1271_channels_5ghz[] = { - { .hw_value = 183, .center_freq = 4915}, - { .hw_value = 188, .center_freq = 4940}, - { .hw_value = 8, .center_freq = 5040}, - { .hw_value = 34, .center_freq = 5170}, - { .hw_value = 44, .center_freq = 5220}, - { .hw_value = 60, .center_freq = 5300}, - { .hw_value = 112, .center_freq = 5560}, - { .hw_value = 132, .center_freq = 5660}, - { .hw_value = 157, .center_freq = 5785}, - { .hw_value = 184, .center_freq = 4920}, - { .hw_value = 189, .center_freq = 4945}, - { .hw_value = 9, .center_freq = 5045}, - { .hw_value = 36, .center_freq = 5180}, - { .hw_value = 46, .center_freq = 5230}, - { .hw_value = 64, .center_freq = 5320}, - { .hw_value = 116, .center_freq = 5580}, - { .hw_value = 136, .center_freq = 5680}, - { .hw_value = 192, .center_freq = 4960}, - { .hw_value = 11, .center_freq = 5055}, - { .hw_value = 38, .center_freq = 5190}, - { .hw_value = 48, .center_freq = 5240}, - { .hw_value = 100, .center_freq = 5500}, - { .hw_value = 120, .center_freq = 5600}, - { .hw_value = 140, .center_freq = 5700}, - { .hw_value = 185, .center_freq = 4925}, - { .hw_value = 196, .center_freq = 4980}, - { .hw_value = 12, .center_freq = 5060}, - { .hw_value = 40, .center_freq = 5200}, - { .hw_value = 52, .center_freq = 5260}, - { .hw_value = 104, .center_freq = 5520}, - { .hw_value = 124, .center_freq = 5620}, - { .hw_value = 149, .center_freq = 5745}, - { .hw_value = 161, .center_freq = 5805}, - { .hw_value = 187, .center_freq = 4935}, - { .hw_value = 7, .center_freq = 5035}, - { .hw_value = 16, .center_freq = 5080}, - { .hw_value = 42, .center_freq = 5210}, - { .hw_value = 56, .center_freq = 5280}, - { .hw_value = 108, .center_freq = 5540}, - { .hw_value = 128, .center_freq = 5640}, - { .hw_value = 153, .center_freq = 5765}, - { .hw_value = 165, .center_freq = 5825}, -}; - -/* mapping to indexes for wl1271_rates_5ghz */ -static const u8 wl1271_rate_to_idx_5ghz[] = { - /* MCS rates are used only with 11n */ - 7, /* CONF_HW_RXTX_RATE_MCS7 */ - 6, /* CONF_HW_RXTX_RATE_MCS6 */ - 5, /* CONF_HW_RXTX_RATE_MCS5 */ - 4, /* CONF_HW_RXTX_RATE_MCS4 */ - 3, /* CONF_HW_RXTX_RATE_MCS3 */ - 2, /* CONF_HW_RXTX_RATE_MCS2 */ - 1, /* CONF_HW_RXTX_RATE_MCS1 */ - 0, /* CONF_HW_RXTX_RATE_MCS0 */ - - 7, /* CONF_HW_RXTX_RATE_54 */ - 6, /* CONF_HW_RXTX_RATE_48 */ - 5, /* CONF_HW_RXTX_RATE_36 */ - 4, /* CONF_HW_RXTX_RATE_24 */ - - /* TI-specific rate */ - CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_22 */ - - 3, /* CONF_HW_RXTX_RATE_18 */ - 2, /* CONF_HW_RXTX_RATE_12 */ - CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_11 */ - 1, /* CONF_HW_RXTX_RATE_9 */ - 0, /* CONF_HW_RXTX_RATE_6 */ - CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_5_5 */ - CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_2 */ - CONF_HW_RXTX_RATE_UNSUPPORTED /* CONF_HW_RXTX_RATE_1 */ -}; - -static struct ieee80211_supported_band wl1271_band_5ghz = { - .channels = wl1271_channels_5ghz, - .n_channels = ARRAY_SIZE(wl1271_channels_5ghz), - .bitrates = wl1271_rates_5ghz, - .n_bitrates = ARRAY_SIZE(wl1271_rates_5ghz), - .ht_cap = WL1271_HT_CAP, -}; - -static const u8 *wl1271_band_rate_to_idx[] = { - [IEEE80211_BAND_2GHZ] = wl1271_rate_to_idx_2ghz, - [IEEE80211_BAND_5GHZ] = wl1271_rate_to_idx_5ghz -}; - -static const struct ieee80211_ops wl1271_ops = { - .start = wl1271_op_start, - .stop = wl1271_op_stop, - .add_interface = wl1271_op_add_interface, - .remove_interface = wl1271_op_remove_interface, - .config = wl1271_op_config, - .prepare_multicast = wl1271_op_prepare_multicast, - .configure_filter = wl1271_op_configure_filter, - .tx = wl1271_op_tx, - .set_key = wl1271_op_set_key, - .hw_scan = wl1271_op_hw_scan, - .bss_info_changed = wl1271_op_bss_info_changed, - .set_rts_threshold = wl1271_op_set_rts_threshold, - .conf_tx = wl1271_op_conf_tx, - .get_tsf = wl1271_op_get_tsf, - .get_survey = wl1271_op_get_survey, - CFG80211_TESTMODE_CMD(wl1271_tm_cmd) -}; - - -u8 wl1271_rate_to_idx(int rate, enum ieee80211_band band) -{ - u8 idx; - - BUG_ON(band >= sizeof(wl1271_band_rate_to_idx)/sizeof(u8 *)); - - if (unlikely(rate >= CONF_HW_RXTX_RATE_MAX)) { - wl1271_error("Illegal RX rate from HW: %d", rate); - return 0; - } - - idx = wl1271_band_rate_to_idx[band][rate]; - if (unlikely(idx == CONF_HW_RXTX_RATE_UNSUPPORTED)) { - wl1271_error("Unsupported RX rate from HW: %d", rate); - return 0; - } - - return idx; -} - -static ssize_t wl1271_sysfs_show_bt_coex_state(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct wl1271 *wl = dev_get_drvdata(dev); - ssize_t len; - - len = PAGE_SIZE; - - mutex_lock(&wl->mutex); - len = snprintf(buf, len, "%d\n\n0 - off\n1 - on\n", - wl->sg_enabled); - mutex_unlock(&wl->mutex); - - return len; - -} - -static ssize_t wl1271_sysfs_store_bt_coex_state(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct wl1271 *wl = dev_get_drvdata(dev); - unsigned long res; - int ret; - - ret = strict_strtoul(buf, 10, &res); - - if (ret < 0) { - wl1271_warning("incorrect value written to bt_coex_mode"); - return count; - } - - mutex_lock(&wl->mutex); - - res = !!res; - - if (res == wl->sg_enabled) - goto out; - - wl->sg_enabled = res; - - if (wl->state == WL1271_STATE_OFF) - goto out; - - ret = wl1271_ps_elp_wakeup(wl, false); - if (ret < 0) - goto out; - - wl1271_acx_sg_enable(wl, wl->sg_enabled); - wl1271_ps_elp_sleep(wl); - - out: - mutex_unlock(&wl->mutex); - return count; -} - -static DEVICE_ATTR(bt_coex_state, S_IRUGO | S_IWUSR, - wl1271_sysfs_show_bt_coex_state, - wl1271_sysfs_store_bt_coex_state); - -static ssize_t wl1271_sysfs_show_hw_pg_ver(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct wl1271 *wl = dev_get_drvdata(dev); - ssize_t len; - - len = PAGE_SIZE; - - mutex_lock(&wl->mutex); - if (wl->hw_pg_ver >= 0) - len = snprintf(buf, len, "%d\n", wl->hw_pg_ver); - else - len = snprintf(buf, len, "n/a\n"); - mutex_unlock(&wl->mutex); - - return len; -} - -static DEVICE_ATTR(hw_pg_ver, S_IRUGO | S_IWUSR, - wl1271_sysfs_show_hw_pg_ver, NULL); - -int wl1271_register_hw(struct wl1271 *wl) -{ - int ret; - - if (wl->mac80211_registered) - return 0; - - SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr); - - ret = ieee80211_register_hw(wl->hw); - if (ret < 0) { - wl1271_error("unable to register mac80211 hw: %d", ret); - return ret; - } - - wl->mac80211_registered = true; - - register_netdevice_notifier(&wl1271_dev_notifier); - - wl1271_notice("loaded"); - - return 0; -} -EXPORT_SYMBOL_GPL(wl1271_register_hw); - -void wl1271_unregister_hw(struct wl1271 *wl) -{ - unregister_netdevice_notifier(&wl1271_dev_notifier); - ieee80211_unregister_hw(wl->hw); - wl->mac80211_registered = false; - -} -EXPORT_SYMBOL_GPL(wl1271_unregister_hw); - -int wl1271_init_ieee80211(struct wl1271 *wl) -{ - static const u32 cipher_suites[] = { - WLAN_CIPHER_SUITE_WEP40, - WLAN_CIPHER_SUITE_WEP104, - WLAN_CIPHER_SUITE_TKIP, - WLAN_CIPHER_SUITE_CCMP, - WL1271_CIPHER_SUITE_GEM, - }; - - /* The tx descriptor buffer and the TKIP space. */ - wl->hw->extra_tx_headroom = WL1271_TKIP_IV_SPACE + - sizeof(struct wl1271_tx_hw_descr); - - /* unit us */ - /* FIXME: find a proper value */ - wl->hw->channel_change_time = 10000; - wl->hw->max_listen_interval = wl->conf.conn.max_listen_interval; - - wl->hw->flags = IEEE80211_HW_SIGNAL_DBM | - IEEE80211_HW_BEACON_FILTER | - IEEE80211_HW_SUPPORTS_PS | - IEEE80211_HW_SUPPORTS_UAPSD | - IEEE80211_HW_HAS_RATE_CONTROL | - IEEE80211_HW_CONNECTION_MONITOR | - IEEE80211_HW_SUPPORTS_CQM_RSSI; - - wl->hw->wiphy->cipher_suites = cipher_suites; - wl->hw->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites); - - wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | - BIT(NL80211_IFTYPE_ADHOC); - wl->hw->wiphy->max_scan_ssids = 1; - wl->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &wl1271_band_2ghz; - wl->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &wl1271_band_5ghz; - - wl->hw->queues = 4; - wl->hw->max_rates = 1; - - SET_IEEE80211_DEV(wl->hw, wl1271_wl_to_dev(wl)); - - return 0; -} -EXPORT_SYMBOL_GPL(wl1271_init_ieee80211); - -#define WL1271_DEFAULT_CHANNEL 0 - -struct ieee80211_hw *wl1271_alloc_hw(void) -{ - struct ieee80211_hw *hw; - struct platform_device *plat_dev = NULL; - struct wl1271 *wl; - int i, ret; - unsigned int order; - - hw = ieee80211_alloc_hw(sizeof(*wl), &wl1271_ops); - if (!hw) { - wl1271_error("could not alloc ieee80211_hw"); - ret = -ENOMEM; - goto err_hw_alloc; - } - - plat_dev = kmemdup(&wl1271_device, sizeof(wl1271_device), GFP_KERNEL); - if (!plat_dev) { - wl1271_error("could not allocate platform_device"); - ret = -ENOMEM; - goto err_plat_alloc; - } - - wl = hw->priv; - memset(wl, 0, sizeof(*wl)); - - INIT_LIST_HEAD(&wl->list); - - wl->hw = hw; - wl->plat_dev = plat_dev; - - skb_queue_head_init(&wl->tx_queue); - - INIT_DELAYED_WORK(&wl->elp_work, wl1271_elp_work); - INIT_DELAYED_WORK(&wl->pspoll_work, wl1271_pspoll_work); - INIT_WORK(&wl->irq_work, wl1271_irq_work); - INIT_WORK(&wl->tx_work, wl1271_tx_work); - INIT_WORK(&wl->recovery_work, wl1271_recovery_work); - INIT_DELAYED_WORK(&wl->scan_complete_work, wl1271_scan_complete_work); - wl->channel = WL1271_DEFAULT_CHANNEL; - wl->beacon_int = WL1271_DEFAULT_BEACON_INT; - wl->default_key = 0; - wl->rx_counter = 0; - wl->rx_config = WL1271_DEFAULT_RX_CONFIG; - wl->rx_filter = WL1271_DEFAULT_RX_FILTER; - wl->psm_entry_retry = 0; - wl->power_level = WL1271_DEFAULT_POWER_LEVEL; - wl->basic_rate_set = CONF_TX_RATE_MASK_BASIC; - wl->basic_rate = CONF_TX_RATE_MASK_BASIC; - wl->rate_set = CONF_TX_RATE_MASK_BASIC; - wl->sta_rate_set = 0; - wl->band = IEEE80211_BAND_2GHZ; - wl->vif = NULL; - wl->flags = 0; - wl->sg_enabled = true; - wl->hw_pg_ver = -1; - - memset(wl->tx_frames_map, 0, sizeof(wl->tx_frames_map)); - for (i = 0; i < ACX_TX_DESCRIPTORS; i++) - wl->tx_frames[i] = NULL; - - spin_lock_init(&wl->wl_lock); - - wl->state = WL1271_STATE_OFF; - mutex_init(&wl->mutex); - - /* Apply default driver configuration. */ - wl1271_conf_init(wl); - - wl1271_debugfs_init(wl); - - order = get_order(WL1271_AGGR_BUFFER_SIZE); - wl->aggr_buf = (u8 *)__get_free_pages(GFP_KERNEL, order); - if (!wl->aggr_buf) { - ret = -ENOMEM; - goto err_hw; - } - - /* Register platform device */ - ret = platform_device_register(wl->plat_dev); - if (ret) { - wl1271_error("couldn't register platform device"); - goto err_aggr; - } - dev_set_drvdata(&wl->plat_dev->dev, wl); - - /* Create sysfs file to control bt coex state */ - ret = device_create_file(&wl->plat_dev->dev, &dev_attr_bt_coex_state); - if (ret < 0) { - wl1271_error("failed to create sysfs file bt_coex_state"); - goto err_platform; - } - - /* Create sysfs file to get HW PG version */ - ret = device_create_file(&wl->plat_dev->dev, &dev_attr_hw_pg_ver); - if (ret < 0) { - wl1271_error("failed to create sysfs file hw_pg_ver"); - goto err_bt_coex_state; - } - - return hw; - -err_bt_coex_state: - device_remove_file(&wl->plat_dev->dev, &dev_attr_bt_coex_state); - -err_platform: - platform_device_unregister(wl->plat_dev); - -err_aggr: - free_pages((unsigned long)wl->aggr_buf, order); - -err_hw: - wl1271_debugfs_exit(wl); - kfree(plat_dev); - -err_plat_alloc: - ieee80211_free_hw(hw); - -err_hw_alloc: - - return ERR_PTR(ret); -} -EXPORT_SYMBOL_GPL(wl1271_alloc_hw); - -int wl1271_free_hw(struct wl1271 *wl) -{ - platform_device_unregister(wl->plat_dev); - free_pages((unsigned long)wl->aggr_buf, - get_order(WL1271_AGGR_BUFFER_SIZE)); - kfree(wl->plat_dev); - - wl1271_debugfs_exit(wl); - - vfree(wl->fw); - wl->fw = NULL; - kfree(wl->nvs); - wl->nvs = NULL; - - kfree(wl->fw_status); - kfree(wl->tx_res_if); - - ieee80211_free_hw(wl->hw); - - return 0; -} -EXPORT_SYMBOL_GPL(wl1271_free_hw); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Luciano Coelho "); -MODULE_AUTHOR("Juuso Oikarinen "); diff --git a/drivers/net/wireless/wl12xx/wl1271_ps.c b/drivers/net/wireless/wl12xx/wl1271_ps.c deleted file mode 100644 index e3c332e2f97..00000000000 --- a/drivers/net/wireless/wl12xx/wl1271_ps.c +++ /dev/null @@ -1,178 +0,0 @@ -/* - * This file is part of wl1271 - * - * Copyright (C) 2008-2009 Nokia Corporation - * - * Contact: Luciano Coelho - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include "wl1271_reg.h" -#include "wl1271_ps.h" -#include "wl1271_io.h" - -#define WL1271_WAKEUP_TIMEOUT 500 - -void wl1271_elp_work(struct work_struct *work) -{ - struct delayed_work *dwork; - struct wl1271 *wl; - - dwork = container_of(work, struct delayed_work, work); - wl = container_of(dwork, struct wl1271, elp_work); - - wl1271_debug(DEBUG_PSM, "elp work"); - - mutex_lock(&wl->mutex); - - if (unlikely(wl->state == WL1271_STATE_OFF)) - goto out; - - if (test_bit(WL1271_FLAG_IN_ELP, &wl->flags) || - (!test_bit(WL1271_FLAG_PSM, &wl->flags) && - !test_bit(WL1271_FLAG_IDLE, &wl->flags))) - goto out; - - wl1271_debug(DEBUG_PSM, "chip to elp"); - wl1271_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_SLEEP); - set_bit(WL1271_FLAG_IN_ELP, &wl->flags); - -out: - mutex_unlock(&wl->mutex); -} - -#define ELP_ENTRY_DELAY 5 - -/* Routines to toggle sleep mode while in ELP */ -void wl1271_ps_elp_sleep(struct wl1271 *wl) -{ - if (test_bit(WL1271_FLAG_PSM, &wl->flags) || - test_bit(WL1271_FLAG_IDLE, &wl->flags)) { - cancel_delayed_work(&wl->elp_work); - ieee80211_queue_delayed_work(wl->hw, &wl->elp_work, - msecs_to_jiffies(ELP_ENTRY_DELAY)); - } -} - -int wl1271_ps_elp_wakeup(struct wl1271 *wl, bool chip_awake) -{ - DECLARE_COMPLETION_ONSTACK(compl); - unsigned long flags; - int ret; - u32 start_time = jiffies; - bool pending = false; - - if (!test_bit(WL1271_FLAG_IN_ELP, &wl->flags)) - return 0; - - wl1271_debug(DEBUG_PSM, "waking up chip from elp"); - - /* - * The spinlock is required here to synchronize both the work and - * the completion variable in one entity. - */ - spin_lock_irqsave(&wl->wl_lock, flags); - if (work_pending(&wl->irq_work) || chip_awake) - pending = true; - else - wl->elp_compl = &compl; - spin_unlock_irqrestore(&wl->wl_lock, flags); - - wl1271_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_WAKE_UP); - - if (!pending) { - ret = wait_for_completion_timeout( - &compl, msecs_to_jiffies(WL1271_WAKEUP_TIMEOUT)); - if (ret == 0) { - wl1271_error("ELP wakeup timeout!"); - ieee80211_queue_work(wl->hw, &wl->recovery_work); - ret = -ETIMEDOUT; - goto err; - } else if (ret < 0) { - wl1271_error("ELP wakeup completion error."); - goto err; - } - } - - clear_bit(WL1271_FLAG_IN_ELP, &wl->flags); - - wl1271_debug(DEBUG_PSM, "wakeup time: %u ms", - jiffies_to_msecs(jiffies - start_time)); - goto out; - -err: - spin_lock_irqsave(&wl->wl_lock, flags); - wl->elp_compl = NULL; - spin_unlock_irqrestore(&wl->wl_lock, flags); - return ret; - -out: - return 0; -} - -int wl1271_ps_set_mode(struct wl1271 *wl, enum wl1271_cmd_ps_mode mode, - u32 rates, bool send) -{ - int ret; - - switch (mode) { - case STATION_POWER_SAVE_MODE: - wl1271_debug(DEBUG_PSM, "entering psm"); - - ret = wl1271_acx_wake_up_conditions(wl); - if (ret < 0) { - wl1271_error("couldn't set wake up conditions"); - return ret; - } - - ret = wl1271_cmd_ps_mode(wl, STATION_POWER_SAVE_MODE, - rates, send); - if (ret < 0) - return ret; - - set_bit(WL1271_FLAG_PSM, &wl->flags); - break; - case STATION_ACTIVE_MODE: - default: - wl1271_debug(DEBUG_PSM, "leaving psm"); - ret = wl1271_ps_elp_wakeup(wl, false); - if (ret < 0) - return ret; - - /* disable beacon early termination */ - ret = wl1271_acx_bet_enable(wl, false); - if (ret < 0) - return ret; - - /* disable beacon filtering */ - ret = wl1271_acx_beacon_filter_opt(wl, false); - if (ret < 0) - return ret; - - ret = wl1271_cmd_ps_mode(wl, STATION_ACTIVE_MODE, - rates, send); - if (ret < 0) - return ret; - - clear_bit(WL1271_FLAG_PSM, &wl->flags); - break; - } - - return ret; -} - - diff --git a/drivers/net/wireless/wl12xx/wl1271_ps.h b/drivers/net/wireless/wl12xx/wl1271_ps.h deleted file mode 100644 index 6ba7b032736..00000000000 --- a/drivers/net/wireless/wl12xx/wl1271_ps.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * This file is part of wl1271 - * - * Copyright (C) 2008-2009 Nokia Corporation - * - * Contact: Luciano Coelho - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __WL1271_PS_H__ -#define __WL1271_PS_H__ - -#include "wl1271.h" -#include "wl1271_acx.h" - -int wl1271_ps_set_mode(struct wl1271 *wl, enum wl1271_cmd_ps_mode mode, - u32 rates, bool send); -void wl1271_ps_elp_sleep(struct wl1271 *wl); -int wl1271_ps_elp_wakeup(struct wl1271 *wl, bool chip_awake); -void wl1271_elp_work(struct work_struct *work); - -#endif /* __WL1271_PS_H__ */ diff --git a/drivers/net/wireless/wl12xx/wl1271_reg.h b/drivers/net/wireless/wl12xx/wl1271_reg.h deleted file mode 100644 index 99096077152..00000000000 --- a/drivers/net/wireless/wl12xx/wl1271_reg.h +++ /dev/null @@ -1,614 +0,0 @@ -/* - * This file is part of wl12xx - * - * Copyright (C) 1998-2009 Texas Instruments. All rights reserved. - * Copyright (C) 2009 Nokia Corporation - * - * Contact: Luciano Coelho - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __REG_H__ -#define __REG_H__ - -#include - -#define REGISTERS_BASE 0x00300000 -#define DRPW_BASE 0x00310000 - -#define REGISTERS_DOWN_SIZE 0x00008800 -#define REGISTERS_WORK_SIZE 0x0000b000 - -#define HW_ACCESS_ELP_CTRL_REG_ADDR 0x1FFFC -#define FW_STATUS_ADDR (0x14FC0 + 0xA000) - -/* ELP register commands */ -#define ELPCTRL_WAKE_UP 0x1 -#define ELPCTRL_WAKE_UP_WLAN_READY 0x5 -#define ELPCTRL_SLEEP 0x0 -/* ELP WLAN_READY bit */ -#define ELPCTRL_WLAN_READY 0x2 - -/*=============================================== - Host Software Reset - 32bit RW - ------------------------------------------ - [31:1] Reserved - 0 SOFT_RESET Soft Reset - When this bit is set, - it holds the Wlan hardware in a soft reset state. - This reset disables all MAC and baseband processor - clocks except the CardBus/PCI interface clock. - It also initializes all MAC state machines except - the host interface. It does not reload the - contents of the EEPROM. When this bit is cleared - (not self-clearing), the Wlan hardware - exits the software reset state. -===============================================*/ -#define ACX_REG_SLV_SOFT_RESET (REGISTERS_BASE + 0x0000) - -#define WL1271_SLV_REG_DATA (REGISTERS_BASE + 0x0008) -#define WL1271_SLV_REG_ADATA (REGISTERS_BASE + 0x000c) -#define WL1271_SLV_MEM_DATA (REGISTERS_BASE + 0x0018) - -#define ACX_REG_INTERRUPT_TRIG (REGISTERS_BASE + 0x0474) -#define ACX_REG_INTERRUPT_TRIG_H (REGISTERS_BASE + 0x0478) - -/*============================================= - Host Interrupt Mask Register - 32bit (RW) - ------------------------------------------ - Setting a bit in this register masks the - corresponding interrupt to the host. - 0 - RX0 - Rx first dubble buffer Data Interrupt - 1 - TXD - Tx Data Interrupt - 2 - TXXFR - Tx Transfer Interrupt - 3 - RX1 - Rx second dubble buffer Data Interrupt - 4 - RXXFR - Rx Transfer Interrupt - 5 - EVENT_A - Event Mailbox interrupt - 6 - EVENT_B - Event Mailbox interrupt - 7 - WNONHST - Wake On Host Interrupt - 8 - TRACE_A - Debug Trace interrupt - 9 - TRACE_B - Debug Trace interrupt - 10 - CDCMP - Command Complete Interrupt - 11 - - 12 - - 13 - - 14 - ICOMP - Initialization Complete Interrupt - 16 - SG SE - Soft Gemini - Sense enable interrupt - 17 - SG SD - Soft Gemini - Sense disable interrupt - 18 - - - 19 - - - 20 - - - 21- - - Default: 0x0001 -*==============================================*/ -#define ACX_REG_INTERRUPT_MASK (REGISTERS_BASE + 0x04DC) - -/*============================================= - Host Interrupt Mask Set 16bit, (Write only) - ------------------------------------------ - Setting a bit in this register sets - the corresponding bin in ACX_HINT_MASK register - without effecting the mask - state of other bits (0 = no effect). -==============================================*/ -#define ACX_REG_HINT_MASK_SET (REGISTERS_BASE + 0x04E0) - -/*============================================= - Host Interrupt Mask Clear 16bit,(Write only) - ------------------------------------------ - Setting a bit in this register clears - the corresponding bin in ACX_HINT_MASK register - without effecting the mask - state of other bits (0 = no effect). -=============================================*/ -#define ACX_REG_HINT_MASK_CLR (REGISTERS_BASE + 0x04E4) - -/*============================================= - Host Interrupt Status Nondestructive Read - 16bit,(Read only) - ------------------------------------------ - The host can read this register to determine - which interrupts are active. - Reading this register doesn't - effect its content. -=============================================*/ -#define ACX_REG_INTERRUPT_NO_CLEAR (REGISTERS_BASE + 0x04E8) - -/*============================================= - Host Interrupt Status Clear on Read Register - 16bit,(Read only) - ------------------------------------------ - The host can read this register to determine - which interrupts are active. - Reading this register clears it, - thus making all interrupts inactive. -==============================================*/ -#define ACX_REG_INTERRUPT_CLEAR (REGISTERS_BASE + 0x04F8) - -/*============================================= - Host Interrupt Acknowledge Register - 16bit,(Write only) - ------------------------------------------ - The host can set individual bits in this - register to clear (acknowledge) the corresp. - interrupt status bits in the HINT_STS_CLR and - HINT_STS_ND registers, thus making the - assotiated interrupt inactive. (0-no effect) -==============================================*/ -#define ACX_REG_INTERRUPT_ACK (REGISTERS_BASE + 0x04F0) - -#define RX_DRIVER_COUNTER_ADDRESS (REGISTERS_BASE + 0x0538) - -/* Device Configuration registers*/ -#define SOR_CFG (REGISTERS_BASE + 0x0800) - -/* Embedded ARM CPU Control */ - -/*=============================================== - Halt eCPU - 32bit RW - ------------------------------------------ - 0 HALT_ECPU Halt Embedded CPU - This bit is the - compliment of bit 1 (MDATA2) in the SOR_CFG register. - During a hardware reset, this bit holds - the inverse of MDATA2. - When downloading firmware from the host, - set this bit (pull down MDATA2). - The host clears this bit after downloading the firmware into - zero-wait-state SSRAM. - When loading firmware from Flash, clear this bit (pull up MDATA2) - so that the eCPU can run the bootloader code in Flash - HALT_ECPU eCPU State - -------------------- - 1 halt eCPU - 0 enable eCPU - ===============================================*/ -#define ACX_REG_ECPU_CONTROL (REGISTERS_BASE + 0x0804) - -#define HI_CFG (REGISTERS_BASE + 0x0808) - -/*=============================================== - EEPROM Burst Read Start - 32bit RW - ------------------------------------------ - [31:1] Reserved - 0 ACX_EE_START - EEPROM Burst Read Start 0 - Setting this bit starts a burst read from - the external EEPROM. - If this bit is set (after reset) before an EEPROM read/write, - the burst read starts at EEPROM address 0. - Otherwise, it starts at the address - following the address of the previous access. - TheWlan hardware hardware clears this bit automatically. - - Default: 0x00000000 -*================================================*/ -#define ACX_REG_EE_START (REGISTERS_BASE + 0x080C) - -#define OCP_POR_CTR (REGISTERS_BASE + 0x09B4) -#define OCP_DATA_WRITE (REGISTERS_BASE + 0x09B8) -#define OCP_DATA_READ (REGISTERS_BASE + 0x09BC) -#define OCP_CMD (REGISTERS_BASE + 0x09C0) - -#define WL1271_HOST_WR_ACCESS (REGISTERS_BASE + 0x09F8) - -#define CHIP_ID_B (REGISTERS_BASE + 0x5674) - -#define CHIP_ID_1271_PG10 (0x4030101) -#define CHIP_ID_1271_PG20 (0x4030111) - -#define ENABLE (REGISTERS_BASE + 0x5450) - -/* Power Management registers */ -#define ELP_CFG_MODE (REGISTERS_BASE + 0x5804) -#define ELP_CMD (REGISTERS_BASE + 0x5808) -#define PLL_CAL_TIME (REGISTERS_BASE + 0x5810) -#define CLK_REQ_TIME (REGISTERS_BASE + 0x5814) -#define CLK_BUF_TIME (REGISTERS_BASE + 0x5818) - -#define CFG_PLL_SYNC_CNT (REGISTERS_BASE + 0x5820) - -/* Scratch Pad registers*/ -#define SCR_PAD0 (REGISTERS_BASE + 0x5608) -#define SCR_PAD1 (REGISTERS_BASE + 0x560C) -#define SCR_PAD2 (REGISTERS_BASE + 0x5610) -#define SCR_PAD3 (REGISTERS_BASE + 0x5614) -#define SCR_PAD4 (REGISTERS_BASE + 0x5618) -#define SCR_PAD4_SET (REGISTERS_BASE + 0x561C) -#define SCR_PAD4_CLR (REGISTERS_BASE + 0x5620) -#define SCR_PAD5 (REGISTERS_BASE + 0x5624) -#define SCR_PAD5_SET (REGISTERS_BASE + 0x5628) -#define SCR_PAD5_CLR (REGISTERS_BASE + 0x562C) -#define SCR_PAD6 (REGISTERS_BASE + 0x5630) -#define SCR_PAD7 (REGISTERS_BASE + 0x5634) -#define SCR_PAD8 (REGISTERS_BASE + 0x5638) -#define SCR_PAD9 (REGISTERS_BASE + 0x563C) - -/* Spare registers*/ -#define SPARE_A1 (REGISTERS_BASE + 0x0994) -#define SPARE_A2 (REGISTERS_BASE + 0x0998) -#define SPARE_A3 (REGISTERS_BASE + 0x099C) -#define SPARE_A4 (REGISTERS_BASE + 0x09A0) -#define SPARE_A5 (REGISTERS_BASE + 0x09A4) -#define SPARE_A6 (REGISTERS_BASE + 0x09A8) -#define SPARE_A7 (REGISTERS_BASE + 0x09AC) -#define SPARE_A8 (REGISTERS_BASE + 0x09B0) -#define SPARE_B1 (REGISTERS_BASE + 0x5420) -#define SPARE_B2 (REGISTERS_BASE + 0x5424) -#define SPARE_B3 (REGISTERS_BASE + 0x5428) -#define SPARE_B4 (REGISTERS_BASE + 0x542C) -#define SPARE_B5 (REGISTERS_BASE + 0x5430) -#define SPARE_B6 (REGISTERS_BASE + 0x5434) -#define SPARE_B7 (REGISTERS_BASE + 0x5438) -#define SPARE_B8 (REGISTERS_BASE + 0x543C) - -#define PLL_PARAMETERS (REGISTERS_BASE + 0x6040) -#define WU_COUNTER_PAUSE (REGISTERS_BASE + 0x6008) -#define WELP_ARM_COMMAND (REGISTERS_BASE + 0x6100) -#define DRPW_SCRATCH_START (DRPW_BASE + 0x002C) - - -#define ACX_SLV_SOFT_RESET_BIT BIT(1) -#define ACX_REG_EEPROM_START_BIT BIT(1) - -/* Command/Information Mailbox Pointers */ - -/*=============================================== - Command Mailbox Pointer - 32bit RW - ------------------------------------------ - This register holds the start address of - the command mailbox located in the Wlan hardware memory. - The host must read this pointer after a reset to - find the location of the command mailbox. - The Wlan hardware initializes the command mailbox - pointer with the default address of the command mailbox. - The command mailbox pointer is not valid until after - the host receives the Init Complete interrupt from - the Wlan hardware. - ===============================================*/ -#define REG_COMMAND_MAILBOX_PTR (SCR_PAD0) - -/*=============================================== - Information Mailbox Pointer - 32bit RW - ------------------------------------------ - This register holds the start address of - the information mailbox located in the Wlan hardware memory. - The host must read this pointer after a reset to find - the location of the information mailbox. - The Wlan hardware initializes the information mailbox pointer - with the default address of the information mailbox. - The information mailbox pointer is not valid - until after the host receives the Init Complete interrupt from - the Wlan hardware. - ===============================================*/ -#define REG_EVENT_MAILBOX_PTR (SCR_PAD1) - - -/* Misc */ - -#define REG_ENABLE_TX_RX (ENABLE) -/* - * Rx configuration (filter) information element - * --------------------------------------------- - */ -#define REG_RX_CONFIG (RX_CFG) -#define REG_RX_FILTER (RX_FILTER_CFG) - - -#define RX_CFG_ENABLE_PHY_HEADER_PLCP 0x0002 - -/* promiscuous - receives all valid frames */ -#define RX_CFG_PROMISCUOUS 0x0008 - -/* receives frames from any BSSID */ -#define RX_CFG_BSSID 0x0020 - -/* receives frames destined to any MAC address */ -#define RX_CFG_MAC 0x0010 - -#define RX_CFG_ENABLE_ONLY_MY_DEST_MAC 0x0010 -#define RX_CFG_ENABLE_ANY_DEST_MAC 0x0000 -#define RX_CFG_ENABLE_ONLY_MY_BSSID 0x0020 -#define RX_CFG_ENABLE_ANY_BSSID 0x0000 - -/* discards all broadcast frames */ -#define RX_CFG_DISABLE_BCAST 0x0200 - -#define RX_CFG_ENABLE_ONLY_MY_SSID 0x0400 -#define RX_CFG_ENABLE_RX_CMPLT_FCS_ERROR 0x0800 -#define RX_CFG_COPY_RX_STATUS 0x2000 -#define RX_CFG_TSF 0x10000 - -#define RX_CONFIG_OPTION_ANY_DST_MY_BSS (RX_CFG_ENABLE_ANY_DEST_MAC | \ - RX_CFG_ENABLE_ONLY_MY_BSSID) - -#define RX_CONFIG_OPTION_MY_DST_ANY_BSS (RX_CFG_ENABLE_ONLY_MY_DEST_MAC\ - | RX_CFG_ENABLE_ANY_BSSID) - -#define RX_CONFIG_OPTION_ANY_DST_ANY_BSS (RX_CFG_ENABLE_ANY_DEST_MAC | \ - RX_CFG_ENABLE_ANY_BSSID) - -#define RX_CONFIG_OPTION_MY_DST_MY_BSS (RX_CFG_ENABLE_ONLY_MY_DEST_MAC\ - | RX_CFG_ENABLE_ONLY_MY_BSSID) - -#define RX_CONFIG_OPTION_FOR_SCAN (RX_CFG_ENABLE_PHY_HEADER_PLCP \ - | RX_CFG_ENABLE_RX_CMPLT_FCS_ERROR \ - | RX_CFG_COPY_RX_STATUS | RX_CFG_TSF) - -#define RX_CONFIG_OPTION_FOR_MEASUREMENT (RX_CFG_ENABLE_ANY_DEST_MAC) - -#define RX_CONFIG_OPTION_FOR_JOIN (RX_CFG_ENABLE_ONLY_MY_BSSID | \ - RX_CFG_ENABLE_ONLY_MY_DEST_MAC) - -#define RX_CONFIG_OPTION_FOR_IBSS_JOIN (RX_CFG_ENABLE_ONLY_MY_SSID | \ - RX_CFG_ENABLE_ONLY_MY_DEST_MAC) - -#define RX_FILTER_OPTION_DEF (CFG_RX_MGMT_EN | CFG_RX_DATA_EN\ - | CFG_RX_CTL_EN | CFG_RX_BCN_EN\ - | CFG_RX_AUTH_EN | CFG_RX_ASSOC_EN) - -#define RX_FILTER_OPTION_FILTER_ALL 0 - -#define RX_FILTER_OPTION_DEF_PRSP_BCN (CFG_RX_PRSP_EN | CFG_RX_MGMT_EN\ - | CFG_RX_RCTS_ACK | CFG_RX_BCN_EN) - -#define RX_FILTER_OPTION_JOIN (CFG_RX_MGMT_EN | CFG_RX_DATA_EN\ - | CFG_RX_BCN_EN | CFG_RX_AUTH_EN\ - | CFG_RX_ASSOC_EN | CFG_RX_RCTS_ACK\ - | CFG_RX_PRSP_EN) - - -/*=============================================== - EEPROM Read/Write Request 32bit RW - ------------------------------------------ - 1 EE_READ - EEPROM Read Request 1 - Setting this bit - loads a single byte of data into the EE_DATA - register from the EEPROM location specified in - the EE_ADDR register. - The Wlan hardware hardware clears this bit automatically. - EE_DATA is valid when this bit is cleared. - - 0 EE_WRITE - EEPROM Write Request - Setting this bit - writes a single byte of data from the EE_DATA register into the - EEPROM location specified in the EE_ADDR register. - The Wlan hardware hardware clears this bit automatically. -*===============================================*/ -#define ACX_EE_CTL_REG EE_CTL -#define EE_WRITE 0x00000001ul -#define EE_READ 0x00000002ul - -/*=============================================== - EEPROM Address - 32bit RW - ------------------------------------------ - This register specifies the address - within the EEPROM from/to which to read/write data. - ===============================================*/ -#define ACX_EE_ADDR_REG EE_ADDR - -/*=============================================== - EEPROM Data - 32bit RW - ------------------------------------------ - This register either holds the read 8 bits of - data from the EEPROM or the write data - to be written to the EEPROM. - ===============================================*/ -#define ACX_EE_DATA_REG EE_DATA - -/*=============================================== - EEPROM Base Address - 32bit RW - ------------------------------------------ - This register holds the upper nine bits - [23:15] of the 24-bit Wlan hardware memory - address for burst reads from EEPROM accesses. - The EEPROM provides the lower 15 bits of this address. - The MSB of the address from the EEPROM is ignored. - ===============================================*/ -#define ACX_EE_CFG EE_CFG - -/*=============================================== - GPIO Output Values -32bit, RW - ------------------------------------------ - [31:16] Reserved - [15: 0] Specify the output values (at the output driver inputs) for - GPIO[15:0], respectively. - ===============================================*/ -#define ACX_GPIO_OUT_REG GPIO_OUT -#define ACX_MAX_GPIO_LINES 15 - -/*=============================================== - Contention window -32bit, RW - ------------------------------------------ - [31:26] Reserved - [25:16] Max (0x3ff) - [15:07] Reserved - [06:00] Current contention window value - default is 0x1F - ===============================================*/ -#define ACX_CONT_WIND_CFG_REG CONT_WIND_CFG -#define ACX_CONT_WIND_MIN_MASK 0x0000007f -#define ACX_CONT_WIND_MAX 0x03ff0000 - -/*=============================================== - HI_CFG Interface Configuration Register Values - ------------------------------------------ - ===============================================*/ -#define HI_CFG_UART_ENABLE 0x00000004 -#define HI_CFG_RST232_ENABLE 0x00000008 -#define HI_CFG_CLOCK_REQ_SELECT 0x00000010 -#define HI_CFG_HOST_INT_ENABLE 0x00000020 -#define HI_CFG_VLYNQ_OUTPUT_ENABLE 0x00000040 -#define HI_CFG_HOST_INT_ACTIVE_LOW 0x00000080 -#define HI_CFG_UART_TX_OUT_GPIO_15 0x00000100 -#define HI_CFG_UART_TX_OUT_GPIO_14 0x00000200 -#define HI_CFG_UART_TX_OUT_GPIO_7 0x00000400 - -/* - * NOTE: USE_ACTIVE_HIGH compilation flag should be defined in makefile - * for platforms using active high interrupt level - */ -#ifdef USE_ACTIVE_HIGH -#define HI_CFG_DEF_VAL \ - (HI_CFG_UART_ENABLE | \ - HI_CFG_RST232_ENABLE | \ - HI_CFG_CLOCK_REQ_SELECT | \ - HI_CFG_HOST_INT_ENABLE) -#else -#define HI_CFG_DEF_VAL \ - (HI_CFG_UART_ENABLE | \ - HI_CFG_RST232_ENABLE | \ - HI_CFG_CLOCK_REQ_SELECT | \ - HI_CFG_HOST_INT_ENABLE) - -#endif - -#define REF_FREQ_19_2 0 -#define REF_FREQ_26_0 1 -#define REF_FREQ_38_4 2 -#define REF_FREQ_40_0 3 -#define REF_FREQ_33_6 4 -#define REF_FREQ_NUM 5 - -#define LUT_PARAM_INTEGER_DIVIDER 0 -#define LUT_PARAM_FRACTIONAL_DIVIDER 1 -#define LUT_PARAM_ATTN_BB 2 -#define LUT_PARAM_ALPHA_BB 3 -#define LUT_PARAM_STOP_TIME_BB 4 -#define LUT_PARAM_BB_PLL_LOOP_FILTER 5 -#define LUT_PARAM_NUM 6 - -#define ACX_EEPROMLESS_IND_REG (SCR_PAD4) -#define USE_EEPROM 0 -#define SOFT_RESET_MAX_TIME 1000000 -#define SOFT_RESET_STALL_TIME 1000 -#define NVS_DATA_BUNDARY_ALIGNMENT 4 - - -/* Firmware image load chunk size */ -#define CHUNK_SIZE 512 - -/* Firmware image header size */ -#define FW_HDR_SIZE 8 - -#define ECPU_CONTROL_HALT 0x00000101 - - -/****************************************************************************** - - CHANNELS, BAND & REG DOMAINS definitions - -******************************************************************************/ - - -enum { - RADIO_BAND_2_4GHZ = 0, /* 2.4 Ghz band */ - RADIO_BAND_5GHZ = 1, /* 5 Ghz band */ - RADIO_BAND_JAPAN_4_9_GHZ = 2, - DEFAULT_BAND = RADIO_BAND_2_4GHZ, - INVALID_BAND = 0xFE, - MAX_RADIO_BANDS = 0xFF -}; - -#define SHORT_PREAMBLE_BIT BIT(0) /* CCK or Barker depending on the rate */ -#define OFDM_RATE_BIT BIT(6) -#define PBCC_RATE_BIT BIT(7) - -enum { - CCK_LONG = 0, - CCK_SHORT = SHORT_PREAMBLE_BIT, - PBCC_LONG = PBCC_RATE_BIT, - PBCC_SHORT = PBCC_RATE_BIT | SHORT_PREAMBLE_BIT, - OFDM = OFDM_RATE_BIT -}; - -/****************************************************************************** - -Transmit-Descriptor RATE-SET field definitions... - -Define a new "Rate-Set" for TX path that incorporates the -Rate & Modulation info into a single 16-bit field. - -TxdRateSet_t: -b15 - Indicates Preamble type (1=SHORT, 0=LONG). - Notes: - Must be LONG (0) for 1Mbps rate. - Does not apply (set to 0) for RevG-OFDM rates. -b14 - Indicates PBCC encoding (1=PBCC, 0=not). - Notes: - Does not apply (set to 0) for rates 1 and 2 Mbps. - Does not apply (set to 0) for RevG-OFDM rates. -b13 - Unused (set to 0). -b12-b0 - Supported Rate indicator bits as defined below. - -******************************************************************************/ - - -/************************************************************************* - - Interrupt Trigger Register (Host -> WiLink) - -**************************************************************************/ - -/* Hardware to Embedded CPU Interrupts - first 32-bit register set */ - -/* - * Host Command Interrupt. Setting this bit masks - * the interrupt that the host issues to inform - * the FW that it has sent a command - * to the Wlan hardware Command Mailbox. - */ -#define INTR_TRIG_CMD BIT(0) - -/* - * Host Event Acknowlegde Interrupt. The host - * sets this bit to acknowledge that it received - * the unsolicited information from the event - * mailbox. - */ -#define INTR_TRIG_EVENT_ACK BIT(1) - -/* - * The host sets this bit to inform the Wlan - * FW that a TX packet is in the XFER - * Buffer #0. - */ -#define INTR_TRIG_TX_PROC0 BIT(2) - -/* - * The host sets this bit to inform the FW - * that it read a packet from RX XFER - * Buffer #0. - */ -#define INTR_TRIG_RX_PROC0 BIT(3) - -#define INTR_TRIG_DEBUG_ACK BIT(4) - -#define INTR_TRIG_STATE_CHANGED BIT(5) - - -/* Hardware to Embedded CPU Interrupts - second 32-bit register set */ - -/* - * The host sets this bit to inform the FW - * that it read a packet from RX XFER - * Buffer #1. - */ -#define INTR_TRIG_RX_PROC1 BIT(17) - -/* - * The host sets this bit to inform the Wlan - * hardware that a TX packet is in the XFER - * Buffer #1. - */ -#define INTR_TRIG_TX_PROC1 BIT(18) - -#endif diff --git a/drivers/net/wireless/wl12xx/wl1271_rx.c b/drivers/net/wireless/wl12xx/wl1271_rx.c deleted file mode 100644 index cacfee56a0d..00000000000 --- a/drivers/net/wireless/wl12xx/wl1271_rx.c +++ /dev/null @@ -1,203 +0,0 @@ -/* - * This file is part of wl1271 - * - * Copyright (C) 2009 Nokia Corporation - * - * Contact: Luciano Coelho - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include - -#include "wl1271.h" -#include "wl1271_acx.h" -#include "wl1271_reg.h" -#include "wl1271_rx.h" -#include "wl1271_io.h" - -static u8 wl1271_rx_get_mem_block(struct wl1271_fw_status *status, - u32 drv_rx_counter) -{ - return le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]) & - RX_MEM_BLOCK_MASK; -} - -static u32 wl1271_rx_get_buf_size(struct wl1271_fw_status *status, - u32 drv_rx_counter) -{ - return (le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]) & - RX_BUF_SIZE_MASK) >> RX_BUF_SIZE_SHIFT_DIV; -} - -static void wl1271_rx_status(struct wl1271 *wl, - struct wl1271_rx_descriptor *desc, - struct ieee80211_rx_status *status, - u8 beacon) -{ - enum ieee80211_band desc_band; - - memset(status, 0, sizeof(struct ieee80211_rx_status)); - - status->band = wl->band; - - if ((desc->flags & WL1271_RX_DESC_BAND_MASK) == WL1271_RX_DESC_BAND_BG) - desc_band = IEEE80211_BAND_2GHZ; - else - desc_band = IEEE80211_BAND_5GHZ; - - status->rate_idx = wl1271_rate_to_idx(desc->rate, desc_band); - -#ifdef CONFIG_WL1271_HT - /* 11n support */ - if (desc->rate <= CONF_HW_RXTX_RATE_MCS0) - status->flag |= RX_FLAG_HT; -#endif - - status->signal = desc->rssi; - - /* - * FIXME: In wl1251, the SNR should be divided by two. In wl1271 we - * need to divide by two for now, but TI has been discussing about - * changing it. This needs to be rechecked. - */ - wl->noise = desc->rssi - (desc->snr >> 1); - - status->freq = ieee80211_channel_to_frequency(desc->channel); - - if (desc->flags & WL1271_RX_DESC_ENCRYPT_MASK) { - status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED; - - if (likely(!(desc->status & WL1271_RX_DESC_DECRYPT_FAIL))) - status->flag |= RX_FLAG_DECRYPTED; - if (unlikely(desc->status & WL1271_RX_DESC_MIC_FAIL)) - status->flag |= RX_FLAG_MMIC_ERROR; - } -} - -static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length) -{ - struct wl1271_rx_descriptor *desc; - struct sk_buff *skb; - u16 *fc; - u8 *buf; - u8 beacon = 0; - - /* - * In PLT mode we seem to get frames and mac80211 warns about them, - * workaround this by not retrieving them at all. - */ - if (unlikely(wl->state == WL1271_STATE_PLT)) - return -EINVAL; - - skb = __dev_alloc_skb(length, GFP_KERNEL); - if (!skb) { - wl1271_error("Couldn't allocate RX frame"); - return -ENOMEM; - } - - buf = skb_put(skb, length); - memcpy(buf, data, length); - - /* the data read starts with the descriptor */ - desc = (struct wl1271_rx_descriptor *) buf; - - /* now we pull the descriptor out of the buffer */ - skb_pull(skb, sizeof(*desc)); - - fc = (u16 *)skb->data; - if ((*fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_BEACON) - beacon = 1; - - wl1271_rx_status(wl, desc, IEEE80211_SKB_RXCB(skb), beacon); - - wl1271_debug(DEBUG_RX, "rx skb 0x%p: %d B %s", skb, skb->len, - beacon ? "beacon" : ""); - - skb_trim(skb, skb->len - desc->pad_len); - - ieee80211_rx_ni(wl->hw, skb); - - return 0; -} - -void wl1271_rx(struct wl1271 *wl, struct wl1271_fw_status *status) -{ - struct wl1271_acx_mem_map *wl_mem_map = wl->target_mem_map; - u32 buf_size; - u32 fw_rx_counter = status->fw_rx_counter & NUM_RX_PKT_DESC_MOD_MASK; - u32 drv_rx_counter = wl->rx_counter & NUM_RX_PKT_DESC_MOD_MASK; - u32 rx_counter; - u32 mem_block; - u32 pkt_length; - u32 pkt_offset; - - while (drv_rx_counter != fw_rx_counter) { - buf_size = 0; - rx_counter = drv_rx_counter; - while (rx_counter != fw_rx_counter) { - pkt_length = wl1271_rx_get_buf_size(status, rx_counter); - if (buf_size + pkt_length > WL1271_AGGR_BUFFER_SIZE) - break; - buf_size += pkt_length; - rx_counter++; - rx_counter &= NUM_RX_PKT_DESC_MOD_MASK; - } - - if (buf_size == 0) { - wl1271_warning("received empty data"); - break; - } - - /* - * Choose the block we want to read - * For aggregated packets, only the first memory block should - * be retrieved. The FW takes care of the rest. - */ - mem_block = wl1271_rx_get_mem_block(status, drv_rx_counter); - wl->rx_mem_pool_addr.addr = (mem_block << 8) + - le32_to_cpu(wl_mem_map->packet_memory_pool_start); - wl->rx_mem_pool_addr.addr_extra = - wl->rx_mem_pool_addr.addr + 4; - wl1271_write(wl, WL1271_SLV_REG_DATA, &wl->rx_mem_pool_addr, - sizeof(wl->rx_mem_pool_addr), false); - - /* Read all available packets at once */ - wl1271_read(wl, WL1271_SLV_MEM_DATA, wl->aggr_buf, - buf_size, true); - - /* Split data into separate packets */ - pkt_offset = 0; - while (pkt_offset < buf_size) { - pkt_length = wl1271_rx_get_buf_size(status, - drv_rx_counter); - /* - * the handle data call can only fail in memory-outage - * conditions, in that case the received frame will just - * be dropped. - */ - wl1271_rx_handle_data(wl, - wl->aggr_buf + pkt_offset, - pkt_length); - wl->rx_counter++; - drv_rx_counter++; - drv_rx_counter &= NUM_RX_PKT_DESC_MOD_MASK; - pkt_offset += pkt_length; - } - } - wl1271_write32(wl, RX_DRIVER_COUNTER_ADDRESS, - cpu_to_le32(wl->rx_counter)); -} diff --git a/drivers/net/wireless/wl12xx/wl1271_rx.h b/drivers/net/wireless/wl12xx/wl1271_rx.h deleted file mode 100644 index 6d41981ce53..00000000000 --- a/drivers/net/wireless/wl12xx/wl1271_rx.h +++ /dev/null @@ -1,121 +0,0 @@ -/* - * This file is part of wl1271 - * - * Copyright (C) 1998-2009 Texas Instruments. All rights reserved. - * Copyright (C) 2008-2009 Nokia Corporation - * - * Contact: Luciano Coelho - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __WL1271_RX_H__ -#define __WL1271_RX_H__ - -#include - -#define WL1271_RX_MAX_RSSI -30 -#define WL1271_RX_MIN_RSSI -95 - -#define WL1271_RX_ALIGN_TO 4 -#define WL1271_RX_ALIGN(len) (((len) + WL1271_RX_ALIGN_TO - 1) & \ - ~(WL1271_RX_ALIGN_TO - 1)) - -#define SHORT_PREAMBLE_BIT BIT(0) -#define OFDM_RATE_BIT BIT(6) -#define PBCC_RATE_BIT BIT(7) - -#define PLCP_HEADER_LENGTH 8 -#define RX_DESC_PACKETID_SHIFT 11 -#define RX_MAX_PACKET_ID 3 - -#define NUM_RX_PKT_DESC_MOD_MASK 7 - -#define RX_DESC_VALID_FCS 0x0001 -#define RX_DESC_MATCH_RXADDR1 0x0002 -#define RX_DESC_MCAST 0x0004 -#define RX_DESC_STAINTIM 0x0008 -#define RX_DESC_VIRTUAL_BM 0x0010 -#define RX_DESC_BCAST 0x0020 -#define RX_DESC_MATCH_SSID 0x0040 -#define RX_DESC_MATCH_BSSID 0x0080 -#define RX_DESC_ENCRYPTION_MASK 0x0300 -#define RX_DESC_MEASURMENT 0x0400 -#define RX_DESC_SEQNUM_MASK 0x1800 -#define RX_DESC_MIC_FAIL 0x2000 -#define RX_DESC_DECRYPT_FAIL 0x4000 - -/* - * RX Descriptor flags: - * - * Bits 0-1 - band - * Bit 2 - STBC - * Bit 3 - A-MPDU - * Bit 4 - HT - * Bits 5-7 - encryption - */ -#define WL1271_RX_DESC_BAND_MASK 0x03 -#define WL1271_RX_DESC_ENCRYPT_MASK 0xE0 - -#define WL1271_RX_DESC_BAND_BG 0x00 -#define WL1271_RX_DESC_BAND_J 0x01 -#define WL1271_RX_DESC_BAND_A 0x02 - -#define WL1271_RX_DESC_STBC BIT(2) -#define WL1271_RX_DESC_A_MPDU BIT(3) -#define WL1271_RX_DESC_HT BIT(4) - -#define WL1271_RX_DESC_ENCRYPT_WEP 0x20 -#define WL1271_RX_DESC_ENCRYPT_TKIP 0x40 -#define WL1271_RX_DESC_ENCRYPT_AES 0x60 -#define WL1271_RX_DESC_ENCRYPT_GEM 0x80 - -/* - * RX Descriptor status - * - * Bits 0-2 - status - * Bits 3-7 - reserved - */ -#define WL1271_RX_DESC_STATUS_MASK 0x07 - -#define WL1271_RX_DESC_SUCCESS 0x00 -#define WL1271_RX_DESC_DECRYPT_FAIL 0x01 -#define WL1271_RX_DESC_MIC_FAIL 0x02 -#define WL1271_RX_DESC_DRIVER_RX_Q_FAIL 0x03 - -#define RX_MEM_BLOCK_MASK 0xFF -#define RX_BUF_SIZE_MASK 0xFFF00 -#define RX_BUF_SIZE_SHIFT_DIV 6 - -struct wl1271_rx_descriptor { - __le16 length; - u8 status; - u8 flags; - u8 rate; - u8 channel; - s8 rssi; - u8 snr; - __le32 timestamp; - u8 packet_class; - u8 process_id; - u8 pad_len; - u8 reserved; -} __packed; - -void wl1271_rx(struct wl1271 *wl, struct wl1271_fw_status *status); -u8 wl1271_rate_to_idx(int rate, enum ieee80211_band band); - -#endif diff --git a/drivers/net/wireless/wl12xx/wl1271_scan.c b/drivers/net/wireless/wl12xx/wl1271_scan.c deleted file mode 100644 index e0661a543a3..00000000000 --- a/drivers/net/wireless/wl12xx/wl1271_scan.c +++ /dev/null @@ -1,307 +0,0 @@ -/* - * This file is part of wl1271 - * - * Copyright (C) 2009-2010 Nokia Corporation - * - * Contact: Luciano Coelho - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include - -#include "wl1271.h" -#include "wl1271_cmd.h" -#include "wl1271_scan.h" -#include "wl1271_acx.h" - -void wl1271_scan_complete_work(struct work_struct *work) -{ - struct delayed_work *dwork; - struct wl1271 *wl; - - dwork = container_of(work, struct delayed_work, work); - wl = container_of(dwork, struct wl1271, scan_complete_work); - - wl1271_debug(DEBUG_SCAN, "Scanning complete"); - - mutex_lock(&wl->mutex); - - if (wl->scan.state == WL1271_SCAN_STATE_IDLE) { - mutex_unlock(&wl->mutex); - return; - } - - wl->scan.state = WL1271_SCAN_STATE_IDLE; - kfree(wl->scan.scanned_ch); - wl->scan.scanned_ch = NULL; - wl->scan.req = NULL; - ieee80211_scan_completed(wl->hw, false); - - if (wl->scan.failed) { - wl1271_info("Scan completed due to error."); - ieee80211_queue_work(wl->hw, &wl->recovery_work); - } - mutex_unlock(&wl->mutex); - -} - - -static int wl1271_get_scan_channels(struct wl1271 *wl, - struct cfg80211_scan_request *req, - struct basic_scan_channel_params *channels, - enum ieee80211_band band, bool passive) -{ - struct conf_scan_settings *c = &wl->conf.scan; - int i, j; - u32 flags; - - for (i = 0, j = 0; - i < req->n_channels && j < WL1271_SCAN_MAX_CHANNELS; - i++) { - - flags = req->channels[i]->flags; - - if (!wl->scan.scanned_ch[i] && - !(flags & IEEE80211_CHAN_DISABLED) && - ((!!(flags & IEEE80211_CHAN_PASSIVE_SCAN)) == passive) && - (req->channels[i]->band == band)) { - - wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ", - req->channels[i]->band, - req->channels[i]->center_freq); - wl1271_debug(DEBUG_SCAN, "hw_value %d, flags %X", - req->channels[i]->hw_value, - req->channels[i]->flags); - wl1271_debug(DEBUG_SCAN, - "max_antenna_gain %d, max_power %d", - req->channels[i]->max_antenna_gain, - req->channels[i]->max_power); - wl1271_debug(DEBUG_SCAN, "beacon_found %d", - req->channels[i]->beacon_found); - - if (!passive) { - channels[j].min_duration = - cpu_to_le32(c->min_dwell_time_active); - channels[j].max_duration = - cpu_to_le32(c->max_dwell_time_active); - } else { - channels[j].min_duration = - cpu_to_le32(c->min_dwell_time_passive); - channels[j].max_duration = - cpu_to_le32(c->max_dwell_time_passive); - } - channels[j].early_termination = 0; - channels[j].tx_power_att = req->channels[i]->max_power; - channels[j].channel = req->channels[i]->hw_value; - - memset(&channels[j].bssid_lsb, 0xff, 4); - memset(&channels[j].bssid_msb, 0xff, 2); - - /* Mark the channels we already used */ - wl->scan.scanned_ch[i] = true; - - j++; - } - } - - return j; -} - -#define WL1271_NOTHING_TO_SCAN 1 - -static int wl1271_scan_send(struct wl1271 *wl, enum ieee80211_band band, - bool passive, u32 basic_rate) -{ - struct wl1271_cmd_scan *cmd; - struct wl1271_cmd_trigger_scan_to *trigger; - int ret; - u16 scan_options = 0; - - cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); - trigger = kzalloc(sizeof(*trigger), GFP_KERNEL); - if (!cmd || !trigger) { - ret = -ENOMEM; - goto out; - } - - /* We always use high priority scans */ - scan_options = WL1271_SCAN_OPT_PRIORITY_HIGH; - - /* No SSIDs means that we have a forced passive scan */ - if (passive || wl->scan.req->n_ssids == 0) - scan_options |= WL1271_SCAN_OPT_PASSIVE; - - cmd->params.scan_options = cpu_to_le16(scan_options); - - cmd->params.n_ch = wl1271_get_scan_channels(wl, wl->scan.req, - cmd->channels, - band, passive); - if (cmd->params.n_ch == 0) { - ret = WL1271_NOTHING_TO_SCAN; - goto out; - } - - cmd->params.tx_rate = cpu_to_le32(basic_rate); - cmd->params.rx_config_options = cpu_to_le32(CFG_RX_ALL_GOOD); - cmd->params.rx_filter_options = - cpu_to_le32(CFG_RX_PRSP_EN | CFG_RX_MGMT_EN | CFG_RX_BCN_EN); - - cmd->params.n_probe_reqs = wl->conf.scan.num_probe_reqs; - cmd->params.tx_rate = cpu_to_le32(basic_rate); - cmd->params.tid_trigger = 0; - cmd->params.scan_tag = WL1271_SCAN_DEFAULT_TAG; - - if (band == IEEE80211_BAND_2GHZ) - cmd->params.band = WL1271_SCAN_BAND_2_4_GHZ; - else - cmd->params.band = WL1271_SCAN_BAND_5_GHZ; - - if (wl->scan.ssid_len && wl->scan.ssid) { - cmd->params.ssid_len = wl->scan.ssid_len; - memcpy(cmd->params.ssid, wl->scan.ssid, wl->scan.ssid_len); - } - - ret = wl1271_cmd_build_probe_req(wl, wl->scan.ssid, wl->scan.ssid_len, - wl->scan.req->ie, wl->scan.req->ie_len, - band); - if (ret < 0) { - wl1271_error("PROBE request template failed"); - goto out; - } - - /* disable the timeout */ - trigger->timeout = 0; - ret = wl1271_cmd_send(wl, CMD_TRIGGER_SCAN_TO, trigger, - sizeof(*trigger), 0); - if (ret < 0) { - wl1271_error("trigger scan to failed for hw scan"); - goto out; - } - - wl1271_dump(DEBUG_SCAN, "SCAN: ", cmd, sizeof(*cmd)); - - ret = wl1271_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd), 0); - if (ret < 0) { - wl1271_error("SCAN failed"); - goto out; - } - -out: - kfree(cmd); - kfree(trigger); - return ret; -} - -void wl1271_scan_stm(struct wl1271 *wl) -{ - int ret = 0; - - switch (wl->scan.state) { - case WL1271_SCAN_STATE_IDLE: - break; - - case WL1271_SCAN_STATE_2GHZ_ACTIVE: - ret = wl1271_scan_send(wl, IEEE80211_BAND_2GHZ, false, - wl->conf.tx.basic_rate); - if (ret == WL1271_NOTHING_TO_SCAN) { - wl->scan.state = WL1271_SCAN_STATE_2GHZ_PASSIVE; - wl1271_scan_stm(wl); - } - - break; - - case WL1271_SCAN_STATE_2GHZ_PASSIVE: - ret = wl1271_scan_send(wl, IEEE80211_BAND_2GHZ, true, - wl->conf.tx.basic_rate); - if (ret == WL1271_NOTHING_TO_SCAN) { - if (wl->enable_11a) - wl->scan.state = WL1271_SCAN_STATE_5GHZ_ACTIVE; - else - wl->scan.state = WL1271_SCAN_STATE_DONE; - wl1271_scan_stm(wl); - } - - break; - - case WL1271_SCAN_STATE_5GHZ_ACTIVE: - ret = wl1271_scan_send(wl, IEEE80211_BAND_5GHZ, false, - wl->conf.tx.basic_rate_5); - if (ret == WL1271_NOTHING_TO_SCAN) { - wl->scan.state = WL1271_SCAN_STATE_5GHZ_PASSIVE; - wl1271_scan_stm(wl); - } - - break; - - case WL1271_SCAN_STATE_5GHZ_PASSIVE: - ret = wl1271_scan_send(wl, IEEE80211_BAND_5GHZ, true, - wl->conf.tx.basic_rate_5); - if (ret == WL1271_NOTHING_TO_SCAN) { - wl->scan.state = WL1271_SCAN_STATE_DONE; - wl1271_scan_stm(wl); - } - - break; - - case WL1271_SCAN_STATE_DONE: - wl->scan.failed = false; - cancel_delayed_work(&wl->scan_complete_work); - ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work, - msecs_to_jiffies(0)); - break; - - default: - wl1271_error("invalid scan state"); - break; - } - - if (ret < 0) { - cancel_delayed_work(&wl->scan_complete_work); - ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work, - msecs_to_jiffies(0)); - } -} - -int wl1271_scan(struct wl1271 *wl, const u8 *ssid, size_t ssid_len, - struct cfg80211_scan_request *req) -{ - if (wl->scan.state != WL1271_SCAN_STATE_IDLE) - return -EBUSY; - - wl->scan.state = WL1271_SCAN_STATE_2GHZ_ACTIVE; - - if (ssid_len && ssid) { - wl->scan.ssid_len = ssid_len; - memcpy(wl->scan.ssid, ssid, ssid_len); - } else { - wl->scan.ssid_len = 0; - } - - wl->scan.req = req; - - wl->scan.scanned_ch = kcalloc(req->n_channels, - sizeof(*wl->scan.scanned_ch), - GFP_KERNEL); - /* we assume failure so that timeout scenarios are handled correctly */ - wl->scan.failed = true; - ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work, - msecs_to_jiffies(WL1271_SCAN_TIMEOUT)); - - wl1271_scan_stm(wl); - - return 0; -} diff --git a/drivers/net/wireless/wl12xx/wl1271_scan.h b/drivers/net/wireless/wl12xx/wl1271_scan.h deleted file mode 100644 index 6d57127b5e6..00000000000 --- a/drivers/net/wireless/wl12xx/wl1271_scan.h +++ /dev/null @@ -1,109 +0,0 @@ -/* - * This file is part of wl1271 - * - * Copyright (C) 2009-2010 Nokia Corporation - * - * Contact: Luciano Coelho - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __WL1271_SCAN_H__ -#define __WL1271_SCAN_H__ - -#include "wl1271.h" - -int wl1271_scan(struct wl1271 *wl, const u8 *ssid, size_t ssid_len, - struct cfg80211_scan_request *req); -int wl1271_scan_build_probe_req(struct wl1271 *wl, - const u8 *ssid, size_t ssid_len, - const u8 *ie, size_t ie_len, u8 band); -void wl1271_scan_stm(struct wl1271 *wl); -void wl1271_scan_complete_work(struct work_struct *work); - -#define WL1271_SCAN_MAX_CHANNELS 24 -#define WL1271_SCAN_DEFAULT_TAG 1 -#define WL1271_SCAN_CURRENT_TX_PWR 0 -#define WL1271_SCAN_OPT_ACTIVE 0 -#define WL1271_SCAN_OPT_PASSIVE 1 -#define WL1271_SCAN_OPT_PRIORITY_HIGH 4 -#define WL1271_SCAN_BAND_2_4_GHZ 0 -#define WL1271_SCAN_BAND_5_GHZ 1 - -#define WL1271_SCAN_TIMEOUT 10000 /* msec */ - -enum { - WL1271_SCAN_STATE_IDLE, - WL1271_SCAN_STATE_2GHZ_ACTIVE, - WL1271_SCAN_STATE_2GHZ_PASSIVE, - WL1271_SCAN_STATE_5GHZ_ACTIVE, - WL1271_SCAN_STATE_5GHZ_PASSIVE, - WL1271_SCAN_STATE_DONE -}; - -struct basic_scan_params { - __le32 rx_config_options; - __le32 rx_filter_options; - /* Scan option flags (WL1271_SCAN_OPT_*) */ - __le16 scan_options; - /* Number of scan channels in the list (maximum 30) */ - u8 n_ch; - /* This field indicates the number of probe requests to send - per channel for an active scan */ - u8 n_probe_reqs; - /* Rate bit field for sending the probes */ - __le32 tx_rate; - u8 tid_trigger; - u8 ssid_len; - /* in order to align */ - u8 padding1[2]; - u8 ssid[IW_ESSID_MAX_SIZE]; - /* Band to scan */ - u8 band; - u8 use_ssid_list; - u8 scan_tag; - u8 padding2; -} __packed; - -struct basic_scan_channel_params { - /* Duration in TU to wait for frames on a channel for active scan */ - __le32 min_duration; - __le32 max_duration; - __le32 bssid_lsb; - __le16 bssid_msb; - u8 early_termination; - u8 tx_power_att; - u8 channel; - /* FW internal use only! */ - u8 dfs_candidate; - u8 activity_detected; - u8 pad; -} __packed; - -struct wl1271_cmd_scan { - struct wl1271_cmd_header header; - - struct basic_scan_params params; - struct basic_scan_channel_params channels[WL1271_SCAN_MAX_CHANNELS]; -} __packed; - -struct wl1271_cmd_trigger_scan_to { - struct wl1271_cmd_header header; - - __le32 timeout; -} __packed; - -#endif /* __WL1271_SCAN_H__ */ diff --git a/drivers/net/wireless/wl12xx/wl1271_sdio.c b/drivers/net/wireless/wl12xx/wl1271_sdio.c deleted file mode 100644 index 784ef343264..00000000000 --- a/drivers/net/wireless/wl12xx/wl1271_sdio.c +++ /dev/null @@ -1,347 +0,0 @@ -/* - * This file is part of wl1271 - * - * Copyright (C) 2009-2010 Nokia Corporation - * - * Contact: Luciano Coelho - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "wl1271.h" -#include "wl12xx_80211.h" -#include "wl1271_io.h" - -#ifndef SDIO_VENDOR_ID_TI -#define SDIO_VENDOR_ID_TI 0x0097 -#endif - -#ifndef SDIO_DEVICE_ID_TI_WL1271 -#define SDIO_DEVICE_ID_TI_WL1271 0x4076 -#endif - -static const struct sdio_device_id wl1271_devices[] = { - { SDIO_DEVICE(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_WL1271) }, - {} -}; -MODULE_DEVICE_TABLE(sdio, wl1271_devices); - -static inline struct sdio_func *wl_to_func(struct wl1271 *wl) -{ - return wl->if_priv; -} - -static struct device *wl1271_sdio_wl_to_dev(struct wl1271 *wl) -{ - return &(wl_to_func(wl)->dev); -} - -static irqreturn_t wl1271_irq(int irq, void *cookie) -{ - struct wl1271 *wl = cookie; - unsigned long flags; - - wl1271_debug(DEBUG_IRQ, "IRQ"); - - /* complete the ELP completion */ - spin_lock_irqsave(&wl->wl_lock, flags); - if (wl->elp_compl) { - complete(wl->elp_compl); - wl->elp_compl = NULL; - } - - if (!test_and_set_bit(WL1271_FLAG_IRQ_RUNNING, &wl->flags)) - ieee80211_queue_work(wl->hw, &wl->irq_work); - set_bit(WL1271_FLAG_IRQ_PENDING, &wl->flags); - spin_unlock_irqrestore(&wl->wl_lock, flags); - - return IRQ_HANDLED; -} - -static void wl1271_sdio_disable_interrupts(struct wl1271 *wl) -{ - disable_irq(wl->irq); -} - -static void wl1271_sdio_enable_interrupts(struct wl1271 *wl) -{ - enable_irq(wl->irq); -} - -static void wl1271_sdio_reset(struct wl1271 *wl) -{ -} - -static void wl1271_sdio_init(struct wl1271 *wl) -{ -} - -static void wl1271_sdio_raw_read(struct wl1271 *wl, int addr, void *buf, - size_t len, bool fixed) -{ - int ret; - struct sdio_func *func = wl_to_func(wl); - - sdio_claim_host(func); - - if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG_ADDR)) { - ((u8 *)buf)[0] = sdio_f0_readb(func, addr, &ret); - wl1271_debug(DEBUG_SDIO, "sdio read 52 addr 0x%x, byte 0x%02x", - addr, ((u8 *)buf)[0]); - } else { - if (fixed) - ret = sdio_readsb(func, buf, addr, len); - else - ret = sdio_memcpy_fromio(func, buf, addr, len); - - wl1271_debug(DEBUG_SDIO, "sdio read 53 addr 0x%x, %zu bytes", - addr, len); - wl1271_dump_ascii(DEBUG_SDIO, "data: ", buf, len); - } - - sdio_release_host(func); - - if (ret) - wl1271_error("sdio read failed (%d)", ret); -} - -static void wl1271_sdio_raw_write(struct wl1271 *wl, int addr, void *buf, - size_t len, bool fixed) -{ - int ret; - struct sdio_func *func = wl_to_func(wl); - - sdio_claim_host(func); - - if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG_ADDR)) { - sdio_f0_writeb(func, ((u8 *)buf)[0], addr, &ret); - wl1271_debug(DEBUG_SDIO, "sdio write 52 addr 0x%x, byte 0x%02x", - addr, ((u8 *)buf)[0]); - } else { - wl1271_debug(DEBUG_SDIO, "sdio write 53 addr 0x%x, %zu bytes", - addr, len); - wl1271_dump_ascii(DEBUG_SDIO, "data: ", buf, len); - - if (fixed) - ret = sdio_writesb(func, addr, buf, len); - else - ret = sdio_memcpy_toio(func, addr, buf, len); - } - - sdio_release_host(func); - - if (ret) - wl1271_error("sdio write failed (%d)", ret); -} - -static int wl1271_sdio_power_on(struct wl1271 *wl) -{ - struct sdio_func *func = wl_to_func(wl); - int ret; - - /* Power up the card */ - ret = pm_runtime_get_sync(&func->dev); - if (ret < 0) - goto out; - - sdio_claim_host(func); - sdio_enable_func(func); - sdio_release_host(func); - -out: - return ret; -} - -static int wl1271_sdio_power_off(struct wl1271 *wl) -{ - struct sdio_func *func = wl_to_func(wl); - - sdio_claim_host(func); - sdio_disable_func(func); - sdio_release_host(func); - - /* Power down the card */ - return pm_runtime_put_sync(&func->dev); -} - -static int wl1271_sdio_set_power(struct wl1271 *wl, bool enable) -{ - if (enable) - return wl1271_sdio_power_on(wl); - else - return wl1271_sdio_power_off(wl); -} - -static struct wl1271_if_operations sdio_ops = { - .read = wl1271_sdio_raw_read, - .write = wl1271_sdio_raw_write, - .reset = wl1271_sdio_reset, - .init = wl1271_sdio_init, - .power = wl1271_sdio_set_power, - .dev = wl1271_sdio_wl_to_dev, - .enable_irq = wl1271_sdio_enable_interrupts, - .disable_irq = wl1271_sdio_disable_interrupts -}; - -static int __devinit wl1271_probe(struct sdio_func *func, - const struct sdio_device_id *id) -{ - struct ieee80211_hw *hw; - const struct wl12xx_platform_data *wlan_data; - struct wl1271 *wl; - int ret; - - /* We are only able to handle the wlan function */ - if (func->num != 0x02) - return -ENODEV; - - hw = wl1271_alloc_hw(); - if (IS_ERR(hw)) - return PTR_ERR(hw); - - wl = hw->priv; - - wl->if_priv = func; - wl->if_ops = &sdio_ops; - - /* Grab access to FN0 for ELP reg. */ - func->card->quirks |= MMC_QUIRK_LENIENT_FN0; - - wlan_data = wl12xx_get_platform_data(); - if (IS_ERR(wlan_data)) { - ret = PTR_ERR(wlan_data); - wl1271_error("missing wlan platform data: %d", ret); - goto out_free; - } - - wl->irq = wlan_data->irq; - wl->ref_clock = wlan_data->board_ref_clock; - - ret = request_irq(wl->irq, wl1271_irq, 0, DRIVER_NAME, wl); - if (ret < 0) { - wl1271_error("request_irq() failed: %d", ret); - goto out_free; - } - - set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING); - - disable_irq(wl->irq); - - ret = wl1271_init_ieee80211(wl); - if (ret) - goto out_irq; - - ret = wl1271_register_hw(wl); - if (ret) - goto out_irq; - - sdio_set_drvdata(func, wl); - - /* Tell PM core that we don't need the card to be powered now */ - pm_runtime_put_noidle(&func->dev); - - wl1271_notice("initialized"); - - return 0; - - out_irq: - free_irq(wl->irq, wl); - - - out_free: - wl1271_free_hw(wl); - - return ret; -} - -static void __devexit wl1271_remove(struct sdio_func *func) -{ - struct wl1271 *wl = sdio_get_drvdata(func); - - /* Undo decrement done above in wl1271_probe */ - pm_runtime_get_noresume(&func->dev); - - wl1271_unregister_hw(wl); - free_irq(wl->irq, wl); - wl1271_free_hw(wl); -} - -static int wl1271_suspend(struct device *dev) -{ - /* Tell MMC/SDIO core it's OK to power down the card - * (if it isn't already), but not to remove it completely */ - return 0; -} - -static int wl1271_resume(struct device *dev) -{ - return 0; -} - -static const struct dev_pm_ops wl1271_sdio_pm_ops = { - .suspend = wl1271_suspend, - .resume = wl1271_resume, -}; - -static struct sdio_driver wl1271_sdio_driver = { - .name = "wl1271_sdio", - .id_table = wl1271_devices, - .probe = wl1271_probe, - .remove = __devexit_p(wl1271_remove), - .drv = { - .pm = &wl1271_sdio_pm_ops, - }, -}; - -static int __init wl1271_init(void) -{ - int ret; - - ret = sdio_register_driver(&wl1271_sdio_driver); - if (ret < 0) { - wl1271_error("failed to register sdio driver: %d", ret); - goto out; - } - -out: - return ret; -} - -static void __exit wl1271_exit(void) -{ - sdio_unregister_driver(&wl1271_sdio_driver); - - wl1271_notice("unloaded"); -} - -module_init(wl1271_init); -module_exit(wl1271_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Luciano Coelho "); -MODULE_AUTHOR("Juuso Oikarinen "); -MODULE_FIRMWARE(WL1271_FW_NAME); diff --git a/drivers/net/wireless/wl12xx/wl1271_spi.c b/drivers/net/wireless/wl12xx/wl1271_spi.c deleted file mode 100644 index ef801680773..00000000000 --- a/drivers/net/wireless/wl12xx/wl1271_spi.c +++ /dev/null @@ -1,498 +0,0 @@ -/* - * This file is part of wl1271 - * - * Copyright (C) 2008-2009 Nokia Corporation - * - * Contact: Luciano Coelho - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include -#include -#include -#include -#include -#include - -#include "wl1271.h" -#include "wl12xx_80211.h" -#include "wl1271_io.h" - -#include "wl1271_reg.h" - -#define WSPI_CMD_READ 0x40000000 -#define WSPI_CMD_WRITE 0x00000000 -#define WSPI_CMD_FIXED 0x20000000 -#define WSPI_CMD_BYTE_LENGTH 0x1FFE0000 -#define WSPI_CMD_BYTE_LENGTH_OFFSET 17 -#define WSPI_CMD_BYTE_ADDR 0x0001FFFF - -#define WSPI_INIT_CMD_CRC_LEN 5 - -#define WSPI_INIT_CMD_START 0x00 -#define WSPI_INIT_CMD_TX 0x40 -/* the extra bypass bit is sampled by the TNET as '1' */ -#define WSPI_INIT_CMD_BYPASS_BIT 0x80 -#define WSPI_INIT_CMD_FIXEDBUSY_LEN 0x07 -#define WSPI_INIT_CMD_EN_FIXEDBUSY 0x80 -#define WSPI_INIT_CMD_DIS_FIXEDBUSY 0x00 -#define WSPI_INIT_CMD_IOD 0x40 -#define WSPI_INIT_CMD_IP 0x20 -#define WSPI_INIT_CMD_CS 0x10 -#define WSPI_INIT_CMD_WS 0x08 -#define WSPI_INIT_CMD_WSPI 0x01 -#define WSPI_INIT_CMD_END 0x01 - -#define WSPI_INIT_CMD_LEN 8 - -#define HW_ACCESS_WSPI_FIXED_BUSY_LEN \ - ((WL1271_BUSY_WORD_LEN - 4) / sizeof(u32)) -#define HW_ACCESS_WSPI_INIT_CMD_MASK 0 - -/* HW limitation: maximum possible chunk size is 4095 bytes */ -#define WSPI_MAX_CHUNK_SIZE 4092 - -#define WSPI_MAX_NUM_OF_CHUNKS (WL1271_AGGR_BUFFER_SIZE / WSPI_MAX_CHUNK_SIZE) - -static inline struct spi_device *wl_to_spi(struct wl1271 *wl) -{ - return wl->if_priv; -} - -static struct device *wl1271_spi_wl_to_dev(struct wl1271 *wl) -{ - return &(wl_to_spi(wl)->dev); -} - -static void wl1271_spi_disable_interrupts(struct wl1271 *wl) -{ - disable_irq(wl->irq); -} - -static void wl1271_spi_enable_interrupts(struct wl1271 *wl) -{ - enable_irq(wl->irq); -} - -static void wl1271_spi_reset(struct wl1271 *wl) -{ - u8 *cmd; - struct spi_transfer t; - struct spi_message m; - - cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL); - if (!cmd) { - wl1271_error("could not allocate cmd for spi reset"); - return; - } - - memset(&t, 0, sizeof(t)); - spi_message_init(&m); - - memset(cmd, 0xff, WSPI_INIT_CMD_LEN); - - t.tx_buf = cmd; - t.len = WSPI_INIT_CMD_LEN; - spi_message_add_tail(&t, &m); - - spi_sync(wl_to_spi(wl), &m); - kfree(cmd); - - wl1271_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN); -} - -static void wl1271_spi_init(struct wl1271 *wl) -{ - u8 crc[WSPI_INIT_CMD_CRC_LEN], *cmd; - struct spi_transfer t; - struct spi_message m; - - cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL); - if (!cmd) { - wl1271_error("could not allocate cmd for spi init"); - return; - } - - memset(crc, 0, sizeof(crc)); - memset(&t, 0, sizeof(t)); - spi_message_init(&m); - - /* - * Set WSPI_INIT_COMMAND - * the data is being send from the MSB to LSB - */ - cmd[2] = 0xff; - cmd[3] = 0xff; - cmd[1] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX; - cmd[0] = 0; - cmd[7] = 0; - cmd[6] |= HW_ACCESS_WSPI_INIT_CMD_MASK << 3; - cmd[6] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN; - - if (HW_ACCESS_WSPI_FIXED_BUSY_LEN == 0) - cmd[5] |= WSPI_INIT_CMD_DIS_FIXEDBUSY; - else - cmd[5] |= WSPI_INIT_CMD_EN_FIXEDBUSY; - - cmd[5] |= WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS - | WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS; - - crc[0] = cmd[1]; - crc[1] = cmd[0]; - crc[2] = cmd[7]; - crc[3] = cmd[6]; - crc[4] = cmd[5]; - - cmd[4] |= crc7(0, crc, WSPI_INIT_CMD_CRC_LEN) << 1; - cmd[4] |= WSPI_INIT_CMD_END; - - t.tx_buf = cmd; - t.len = WSPI_INIT_CMD_LEN; - spi_message_add_tail(&t, &m); - - spi_sync(wl_to_spi(wl), &m); - wl1271_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN); - kfree(cmd); -} - -#define WL1271_BUSY_WORD_TIMEOUT 1000 - -static int wl1271_spi_read_busy(struct wl1271 *wl) -{ - struct spi_transfer t[1]; - struct spi_message m; - u32 *busy_buf; - int num_busy_bytes = 0; - - /* - * Read further busy words from SPI until a non-busy word is - * encountered, then read the data itself into the buffer. - */ - - num_busy_bytes = WL1271_BUSY_WORD_TIMEOUT; - busy_buf = wl->buffer_busyword; - while (num_busy_bytes) { - num_busy_bytes--; - spi_message_init(&m); - memset(t, 0, sizeof(t)); - t[0].rx_buf = busy_buf; - t[0].len = sizeof(u32); - t[0].cs_change = true; - spi_message_add_tail(&t[0], &m); - spi_sync(wl_to_spi(wl), &m); - - if (*busy_buf & 0x1) - return 0; - } - - /* The SPI bus is unresponsive, the read failed. */ - wl1271_error("SPI read busy-word timeout!\n"); - return -ETIMEDOUT; -} - -static void wl1271_spi_raw_read(struct wl1271 *wl, int addr, void *buf, - size_t len, bool fixed) -{ - struct spi_transfer t[2]; - struct spi_message m; - u32 *busy_buf; - u32 *cmd; - u32 chunk_len; - - while (len > 0) { - chunk_len = min((size_t)WSPI_MAX_CHUNK_SIZE, len); - - cmd = &wl->buffer_cmd; - busy_buf = wl->buffer_busyword; - - *cmd = 0; - *cmd |= WSPI_CMD_READ; - *cmd |= (chunk_len << WSPI_CMD_BYTE_LENGTH_OFFSET) & - WSPI_CMD_BYTE_LENGTH; - *cmd |= addr & WSPI_CMD_BYTE_ADDR; - - if (fixed) - *cmd |= WSPI_CMD_FIXED; - - spi_message_init(&m); - memset(t, 0, sizeof(t)); - - t[0].tx_buf = cmd; - t[0].len = 4; - t[0].cs_change = true; - spi_message_add_tail(&t[0], &m); - - /* Busy and non busy words read */ - t[1].rx_buf = busy_buf; - t[1].len = WL1271_BUSY_WORD_LEN; - t[1].cs_change = true; - spi_message_add_tail(&t[1], &m); - - spi_sync(wl_to_spi(wl), &m); - - if (!(busy_buf[WL1271_BUSY_WORD_CNT - 1] & 0x1) && - wl1271_spi_read_busy(wl)) { - memset(buf, 0, chunk_len); - return; - } - - spi_message_init(&m); - memset(t, 0, sizeof(t)); - - t[0].rx_buf = buf; - t[0].len = chunk_len; - t[0].cs_change = true; - spi_message_add_tail(&t[0], &m); - - spi_sync(wl_to_spi(wl), &m); - - wl1271_dump(DEBUG_SPI, "spi_read cmd -> ", cmd, sizeof(*cmd)); - wl1271_dump(DEBUG_SPI, "spi_read buf <- ", buf, chunk_len); - - if (!fixed) - addr += chunk_len; - buf += chunk_len; - len -= chunk_len; - } -} - -static void wl1271_spi_raw_write(struct wl1271 *wl, int addr, void *buf, - size_t len, bool fixed) -{ - struct spi_transfer t[2 * WSPI_MAX_NUM_OF_CHUNKS]; - struct spi_message m; - u32 commands[WSPI_MAX_NUM_OF_CHUNKS]; - u32 *cmd; - u32 chunk_len; - int i; - - WARN_ON(len > WL1271_AGGR_BUFFER_SIZE); - - spi_message_init(&m); - memset(t, 0, sizeof(t)); - - cmd = &commands[0]; - i = 0; - while (len > 0) { - chunk_len = min((size_t)WSPI_MAX_CHUNK_SIZE, len); - - *cmd = 0; - *cmd |= WSPI_CMD_WRITE; - *cmd |= (chunk_len << WSPI_CMD_BYTE_LENGTH_OFFSET) & - WSPI_CMD_BYTE_LENGTH; - *cmd |= addr & WSPI_CMD_BYTE_ADDR; - - if (fixed) - *cmd |= WSPI_CMD_FIXED; - - t[i].tx_buf = cmd; - t[i].len = sizeof(*cmd); - spi_message_add_tail(&t[i++], &m); - - t[i].tx_buf = buf; - t[i].len = chunk_len; - spi_message_add_tail(&t[i++], &m); - - wl1271_dump(DEBUG_SPI, "spi_write cmd -> ", cmd, sizeof(*cmd)); - wl1271_dump(DEBUG_SPI, "spi_write buf -> ", buf, chunk_len); - - if (!fixed) - addr += chunk_len; - buf += chunk_len; - len -= chunk_len; - cmd++; - } - - spi_sync(wl_to_spi(wl), &m); -} - -static irqreturn_t wl1271_irq(int irq, void *cookie) -{ - struct wl1271 *wl; - unsigned long flags; - - wl1271_debug(DEBUG_IRQ, "IRQ"); - - wl = cookie; - - /* complete the ELP completion */ - spin_lock_irqsave(&wl->wl_lock, flags); - if (wl->elp_compl) { - complete(wl->elp_compl); - wl->elp_compl = NULL; - } - - if (!test_and_set_bit(WL1271_FLAG_IRQ_RUNNING, &wl->flags)) - ieee80211_queue_work(wl->hw, &wl->irq_work); - set_bit(WL1271_FLAG_IRQ_PENDING, &wl->flags); - spin_unlock_irqrestore(&wl->wl_lock, flags); - - return IRQ_HANDLED; -} - -static int wl1271_spi_set_power(struct wl1271 *wl, bool enable) -{ - if (wl->set_power) - wl->set_power(enable); - - return 0; -} - -static struct wl1271_if_operations spi_ops = { - .read = wl1271_spi_raw_read, - .write = wl1271_spi_raw_write, - .reset = wl1271_spi_reset, - .init = wl1271_spi_init, - .power = wl1271_spi_set_power, - .dev = wl1271_spi_wl_to_dev, - .enable_irq = wl1271_spi_enable_interrupts, - .disable_irq = wl1271_spi_disable_interrupts -}; - -static int __devinit wl1271_probe(struct spi_device *spi) -{ - struct wl12xx_platform_data *pdata; - struct ieee80211_hw *hw; - struct wl1271 *wl; - int ret; - - pdata = spi->dev.platform_data; - if (!pdata) { - wl1271_error("no platform data"); - return -ENODEV; - } - - hw = wl1271_alloc_hw(); - if (IS_ERR(hw)) - return PTR_ERR(hw); - - wl = hw->priv; - - dev_set_drvdata(&spi->dev, wl); - wl->if_priv = spi; - - wl->if_ops = &spi_ops; - - /* This is the only SPI value that we need to set here, the rest - * comes from the board-peripherals file */ - spi->bits_per_word = 32; - - ret = spi_setup(spi); - if (ret < 0) { - wl1271_error("spi_setup failed"); - goto out_free; - } - - wl->set_power = pdata->set_power; - if (!wl->set_power) { - wl1271_error("set power function missing in platform data"); - ret = -ENODEV; - goto out_free; - } - - wl->ref_clock = pdata->board_ref_clock; - - wl->irq = spi->irq; - if (wl->irq < 0) { - wl1271_error("irq missing in platform data"); - ret = -ENODEV; - goto out_free; - } - - ret = request_irq(wl->irq, wl1271_irq, 0, DRIVER_NAME, wl); - if (ret < 0) { - wl1271_error("request_irq() failed: %d", ret); - goto out_free; - } - - set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING); - - disable_irq(wl->irq); - - ret = wl1271_init_ieee80211(wl); - if (ret) - goto out_irq; - - ret = wl1271_register_hw(wl); - if (ret) - goto out_irq; - - wl1271_notice("initialized"); - - return 0; - - out_irq: - free_irq(wl->irq, wl); - - out_free: - wl1271_free_hw(wl); - - return ret; -} - -static int __devexit wl1271_remove(struct spi_device *spi) -{ - struct wl1271 *wl = dev_get_drvdata(&spi->dev); - - wl1271_unregister_hw(wl); - free_irq(wl->irq, wl); - wl1271_free_hw(wl); - - return 0; -} - - -static struct spi_driver wl1271_spi_driver = { - .driver = { - .name = "wl1271_spi", - .bus = &spi_bus_type, - .owner = THIS_MODULE, - }, - - .probe = wl1271_probe, - .remove = __devexit_p(wl1271_remove), -}; - -static int __init wl1271_init(void) -{ - int ret; - - ret = spi_register_driver(&wl1271_spi_driver); - if (ret < 0) { - wl1271_error("failed to register spi driver: %d", ret); - goto out; - } - -out: - return ret; -} - -static void __exit wl1271_exit(void) -{ - spi_unregister_driver(&wl1271_spi_driver); - - wl1271_notice("unloaded"); -} - -module_init(wl1271_init); -module_exit(wl1271_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Luciano Coelho "); -MODULE_AUTHOR("Juuso Oikarinen "); -MODULE_FIRMWARE(WL1271_FW_NAME); -MODULE_ALIAS("spi:wl1271"); diff --git a/drivers/net/wireless/wl12xx/wl1271_testmode.c b/drivers/net/wireless/wl12xx/wl1271_testmode.c deleted file mode 100644 index 55ec4428922..00000000000 --- a/drivers/net/wireless/wl12xx/wl1271_testmode.c +++ /dev/null @@ -1,290 +0,0 @@ -/* - * This file is part of wl1271 - * - * Copyright (C) 2010 Nokia Corporation - * - * Contact: Luciano Coelho - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ -#include "wl1271_testmode.h" - -#include -#include - -#include "wl1271.h" -#include "wl1271_acx.h" - -#define WL1271_TM_MAX_DATA_LENGTH 1024 - -enum wl1271_tm_commands { - WL1271_TM_CMD_UNSPEC, - WL1271_TM_CMD_TEST, - WL1271_TM_CMD_INTERROGATE, - WL1271_TM_CMD_CONFIGURE, - WL1271_TM_CMD_NVS_PUSH, - WL1271_TM_CMD_SET_PLT_MODE, - WL1271_TM_CMD_RECOVER, - - __WL1271_TM_CMD_AFTER_LAST -}; -#define WL1271_TM_CMD_MAX (__WL1271_TM_CMD_AFTER_LAST - 1) - -enum wl1271_tm_attrs { - WL1271_TM_ATTR_UNSPEC, - WL1271_TM_ATTR_CMD_ID, - WL1271_TM_ATTR_ANSWER, - WL1271_TM_ATTR_DATA, - WL1271_TM_ATTR_IE_ID, - WL1271_TM_ATTR_PLT_MODE, - - __WL1271_TM_ATTR_AFTER_LAST -}; -#define WL1271_TM_ATTR_MAX (__WL1271_TM_ATTR_AFTER_LAST - 1) - -static struct nla_policy wl1271_tm_policy[WL1271_TM_ATTR_MAX + 1] = { - [WL1271_TM_ATTR_CMD_ID] = { .type = NLA_U32 }, - [WL1271_TM_ATTR_ANSWER] = { .type = NLA_U8 }, - [WL1271_TM_ATTR_DATA] = { .type = NLA_BINARY, - .len = WL1271_TM_MAX_DATA_LENGTH }, - [WL1271_TM_ATTR_IE_ID] = { .type = NLA_U32 }, - [WL1271_TM_ATTR_PLT_MODE] = { .type = NLA_U32 }, -}; - - -static int wl1271_tm_cmd_test(struct wl1271 *wl, struct nlattr *tb[]) -{ - int buf_len, ret, len; - struct sk_buff *skb; - void *buf; - u8 answer = 0; - - wl1271_debug(DEBUG_TESTMODE, "testmode cmd test"); - - if (!tb[WL1271_TM_ATTR_DATA]) - return -EINVAL; - - buf = nla_data(tb[WL1271_TM_ATTR_DATA]); - buf_len = nla_len(tb[WL1271_TM_ATTR_DATA]); - - if (tb[WL1271_TM_ATTR_ANSWER]) - answer = nla_get_u8(tb[WL1271_TM_ATTR_ANSWER]); - - if (buf_len > sizeof(struct wl1271_command)) - return -EMSGSIZE; - - mutex_lock(&wl->mutex); - ret = wl1271_cmd_test(wl, buf, buf_len, answer); - mutex_unlock(&wl->mutex); - - if (ret < 0) { - wl1271_warning("testmode cmd test failed: %d", ret); - return ret; - } - - if (answer) { - len = nla_total_size(buf_len); - skb = cfg80211_testmode_alloc_reply_skb(wl->hw->wiphy, len); - if (!skb) - return -ENOMEM; - - NLA_PUT(skb, WL1271_TM_ATTR_DATA, buf_len, buf); - ret = cfg80211_testmode_reply(skb); - if (ret < 0) - return ret; - } - - return 0; - -nla_put_failure: - kfree_skb(skb); - return -EMSGSIZE; -} - -static int wl1271_tm_cmd_interrogate(struct wl1271 *wl, struct nlattr *tb[]) -{ - int ret; - struct wl1271_command *cmd; - struct sk_buff *skb; - u8 ie_id; - - wl1271_debug(DEBUG_TESTMODE, "testmode cmd interrogate"); - - if (!tb[WL1271_TM_ATTR_IE_ID]) - return -EINVAL; - - ie_id = nla_get_u8(tb[WL1271_TM_ATTR_IE_ID]); - - cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); - if (!cmd) - return -ENOMEM; - - mutex_lock(&wl->mutex); - ret = wl1271_cmd_interrogate(wl, ie_id, cmd, sizeof(*cmd)); - mutex_unlock(&wl->mutex); - - if (ret < 0) { - wl1271_warning("testmode cmd interrogate failed: %d", ret); - return ret; - } - - skb = cfg80211_testmode_alloc_reply_skb(wl->hw->wiphy, sizeof(*cmd)); - if (!skb) - return -ENOMEM; - - NLA_PUT(skb, WL1271_TM_ATTR_DATA, sizeof(*cmd), cmd); - - return 0; - -nla_put_failure: - kfree_skb(skb); - return -EMSGSIZE; -} - -static int wl1271_tm_cmd_configure(struct wl1271 *wl, struct nlattr *tb[]) -{ - int buf_len, ret; - void *buf; - u8 ie_id; - - wl1271_debug(DEBUG_TESTMODE, "testmode cmd configure"); - - if (!tb[WL1271_TM_ATTR_DATA]) - return -EINVAL; - if (!tb[WL1271_TM_ATTR_IE_ID]) - return -EINVAL; - - ie_id = nla_get_u8(tb[WL1271_TM_ATTR_IE_ID]); - buf = nla_data(tb[WL1271_TM_ATTR_DATA]); - buf_len = nla_len(tb[WL1271_TM_ATTR_DATA]); - - if (buf_len > sizeof(struct wl1271_command)) - return -EMSGSIZE; - - mutex_lock(&wl->mutex); - ret = wl1271_cmd_configure(wl, ie_id, buf, buf_len); - mutex_unlock(&wl->mutex); - - if (ret < 0) { - wl1271_warning("testmode cmd configure failed: %d", ret); - return ret; - } - - return 0; -} - -static int wl1271_tm_cmd_nvs_push(struct wl1271 *wl, struct nlattr *tb[]) -{ - int ret = 0; - size_t len; - void *buf; - - wl1271_debug(DEBUG_TESTMODE, "testmode cmd nvs push"); - - if (!tb[WL1271_TM_ATTR_DATA]) - return -EINVAL; - - buf = nla_data(tb[WL1271_TM_ATTR_DATA]); - len = nla_len(tb[WL1271_TM_ATTR_DATA]); - - mutex_lock(&wl->mutex); - - kfree(wl->nvs); - - wl->nvs = kzalloc(sizeof(struct wl1271_nvs_file), GFP_KERNEL); - if (!wl->nvs) { - wl1271_error("could not allocate memory for the nvs file"); - ret = -ENOMEM; - goto out; - } - - memcpy(wl->nvs, buf, len); - wl->nvs_len = len; - - wl1271_debug(DEBUG_TESTMODE, "testmode pushed nvs"); - -out: - mutex_unlock(&wl->mutex); - - return ret; -} - -static int wl1271_tm_cmd_set_plt_mode(struct wl1271 *wl, struct nlattr *tb[]) -{ - u32 val; - int ret; - - wl1271_debug(DEBUG_TESTMODE, "testmode cmd set plt mode"); - - if (!tb[WL1271_TM_ATTR_PLT_MODE]) - return -EINVAL; - - val = nla_get_u32(tb[WL1271_TM_ATTR_PLT_MODE]); - - switch (val) { - case 0: - ret = wl1271_plt_stop(wl); - break; - case 1: - ret = wl1271_plt_start(wl); - break; - default: - ret = -EINVAL; - break; - } - - return ret; -} - -static int wl1271_tm_cmd_recover(struct wl1271 *wl, struct nlattr *tb[]) -{ - wl1271_debug(DEBUG_TESTMODE, "testmode cmd recover"); - - ieee80211_queue_work(wl->hw, &wl->recovery_work); - - return 0; -} - -int wl1271_tm_cmd(struct ieee80211_hw *hw, void *data, int len) -{ - struct wl1271 *wl = hw->priv; - struct nlattr *tb[WL1271_TM_ATTR_MAX + 1]; - int err; - - err = nla_parse(tb, WL1271_TM_ATTR_MAX, data, len, wl1271_tm_policy); - if (err) - return err; - - if (!tb[WL1271_TM_ATTR_CMD_ID]) - return -EINVAL; - - switch (nla_get_u32(tb[WL1271_TM_ATTR_CMD_ID])) { - case WL1271_TM_CMD_TEST: - return wl1271_tm_cmd_test(wl, tb); - case WL1271_TM_CMD_INTERROGATE: - return wl1271_tm_cmd_interrogate(wl, tb); - case WL1271_TM_CMD_CONFIGURE: - return wl1271_tm_cmd_configure(wl, tb); - case WL1271_TM_CMD_NVS_PUSH: - return wl1271_tm_cmd_nvs_push(wl, tb); - case WL1271_TM_CMD_SET_PLT_MODE: - return wl1271_tm_cmd_set_plt_mode(wl, tb); - case WL1271_TM_CMD_RECOVER: - return wl1271_tm_cmd_recover(wl, tb); - default: - return -EOPNOTSUPP; - } -} diff --git a/drivers/net/wireless/wl12xx/wl1271_testmode.h b/drivers/net/wireless/wl12xx/wl1271_testmode.h deleted file mode 100644 index c196d28f9d9..00000000000 --- a/drivers/net/wireless/wl12xx/wl1271_testmode.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * This file is part of wl1271 - * - * Copyright (C) 2010 Nokia Corporation - * - * Contact: Luciano Coelho - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __WL1271_TESTMODE_H__ -#define __WL1271_TESTMODE_H__ - -#include - -int wl1271_tm_cmd(struct ieee80211_hw *hw, void *data, int len); - -#endif /* __WL1271_TESTMODE_H__ */ diff --git a/drivers/net/wireless/wl12xx/wl1271_tx.c b/drivers/net/wireless/wl12xx/wl1271_tx.c deleted file mode 100644 index 279be5b98d9..00000000000 --- a/drivers/net/wireless/wl12xx/wl1271_tx.c +++ /dev/null @@ -1,485 +0,0 @@ -/* - * This file is part of wl1271 - * - * Copyright (C) 2009 Nokia Corporation - * - * Contact: Luciano Coelho - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include -#include - -#include "wl1271.h" -#include "wl1271_io.h" -#include "wl1271_reg.h" -#include "wl1271_ps.h" -#include "wl1271_tx.h" - -static int wl1271_alloc_tx_id(struct wl1271 *wl, struct sk_buff *skb) -{ - int id; - - id = find_first_zero_bit(wl->tx_frames_map, ACX_TX_DESCRIPTORS); - if (id >= ACX_TX_DESCRIPTORS) - return -EBUSY; - - __set_bit(id, wl->tx_frames_map); - wl->tx_frames[id] = skb; - wl->tx_frames_cnt++; - return id; -} - -static void wl1271_free_tx_id(struct wl1271 *wl, int id) -{ - if (__test_and_clear_bit(id, wl->tx_frames_map)) { - wl->tx_frames[id] = NULL; - wl->tx_frames_cnt--; - } -} - -static int wl1271_tx_allocate(struct wl1271 *wl, struct sk_buff *skb, u32 extra, - u32 buf_offset) -{ - struct wl1271_tx_hw_descr *desc; - u32 total_len = skb->len + sizeof(struct wl1271_tx_hw_descr) + extra; - u32 total_blocks; - int id, ret = -EBUSY; - - if (buf_offset + total_len > WL1271_AGGR_BUFFER_SIZE) - return -EAGAIN; - - /* allocate free identifier for the packet */ - id = wl1271_alloc_tx_id(wl, skb); - if (id < 0) - return id; - - /* approximate the number of blocks required for this packet - in the firmware */ - total_blocks = total_len + TX_HW_BLOCK_SIZE - 1; - total_blocks = total_blocks / TX_HW_BLOCK_SIZE + TX_HW_BLOCK_SPARE; - if (total_blocks <= wl->tx_blocks_available) { - desc = (struct wl1271_tx_hw_descr *)skb_push( - skb, total_len - skb->len); - - desc->extra_mem_blocks = TX_HW_BLOCK_SPARE; - desc->total_mem_blocks = total_blocks; - desc->id = id; - - wl->tx_blocks_available -= total_blocks; - - ret = 0; - - wl1271_debug(DEBUG_TX, - "tx_allocate: size: %d, blocks: %d, id: %d", - total_len, total_blocks, id); - } else { - wl1271_free_tx_id(wl, id); - } - - return ret; -} - -static void wl1271_tx_fill_hdr(struct wl1271 *wl, struct sk_buff *skb, - u32 extra, struct ieee80211_tx_info *control) -{ - struct timespec ts; - struct wl1271_tx_hw_descr *desc; - int pad, ac; - s64 hosttime; - u16 tx_attr; - - desc = (struct wl1271_tx_hw_descr *) skb->data; - - /* relocate space for security header */ - if (extra) { - void *framestart = skb->data + sizeof(*desc); - u16 fc = *(u16 *)(framestart + extra); - int hdrlen = ieee80211_hdrlen(cpu_to_le16(fc)); - memmove(framestart, framestart + extra, hdrlen); - } - - /* configure packet life time */ - getnstimeofday(&ts); - hosttime = (timespec_to_ns(&ts) >> 10); - desc->start_time = cpu_to_le32(hosttime - wl->time_offset); - desc->life_time = cpu_to_le16(TX_HW_MGMT_PKT_LIFETIME_TU); - - /* configure the tx attributes */ - tx_attr = wl->session_counter << TX_HW_ATTR_OFST_SESSION_COUNTER; - - /* queue (we use same identifiers for tid's and ac's */ - ac = wl1271_tx_get_queue(skb_get_queue_mapping(skb)); - desc->tid = ac; - - desc->aid = TX_HW_DEFAULT_AID; - desc->reserved = 0; - - /* align the length (and store in terms of words) */ - pad = WL1271_TX_ALIGN(skb->len); - desc->length = cpu_to_le16(pad >> 2); - - /* calculate number of padding bytes */ - pad = pad - skb->len; - tx_attr |= pad << TX_HW_ATTR_OFST_LAST_WORD_PAD; - - /* if the packets are destined for AP (have a STA entry) send them - with AP rate policies, otherwise use default basic rates */ - if (control->control.sta) - tx_attr |= ACX_TX_AP_FULL_RATE << TX_HW_ATTR_OFST_RATE_POLICY; - - desc->tx_attr = cpu_to_le16(tx_attr); - - wl1271_debug(DEBUG_TX, "tx_fill_hdr: pad: %d", pad); -} - -/* caller must hold wl->mutex */ -static int wl1271_prepare_tx_frame(struct wl1271 *wl, struct sk_buff *skb, - u32 buf_offset) -{ - struct ieee80211_tx_info *info; - u32 extra = 0; - int ret = 0; - u8 idx; - u32 total_len; - - if (!skb) - return -EINVAL; - - info = IEEE80211_SKB_CB(skb); - - if (info->control.hw_key && - info->control.hw_key->cipher == WLAN_CIPHER_SUITE_TKIP) - extra = WL1271_TKIP_IV_SPACE; - - if (info->control.hw_key) { - idx = info->control.hw_key->hw_key_idx; - - /* FIXME: do we have to do this if we're not using WEP? */ - if (unlikely(wl->default_key != idx)) { - ret = wl1271_cmd_set_default_wep_key(wl, idx); - if (ret < 0) - return ret; - wl->default_key = idx; - } - } - - ret = wl1271_tx_allocate(wl, skb, extra, buf_offset); - if (ret < 0) - return ret; - - wl1271_tx_fill_hdr(wl, skb, extra, info); - - /* - * The length of each packet is stored in terms of words. Thus, we must - * pad the skb data to make sure its length is aligned. - * The number of padding bytes is computed and set in wl1271_tx_fill_hdr - */ - total_len = WL1271_TX_ALIGN(skb->len); - memcpy(wl->aggr_buf + buf_offset, skb->data, skb->len); - memset(wl->aggr_buf + buf_offset + skb->len, 0, total_len - skb->len); - - return total_len; -} - -u32 wl1271_tx_enabled_rates_get(struct wl1271 *wl, u32 rate_set) -{ - struct ieee80211_supported_band *band; - u32 enabled_rates = 0; - int bit; - - band = wl->hw->wiphy->bands[wl->band]; - for (bit = 0; bit < band->n_bitrates; bit++) { - if (rate_set & 0x1) - enabled_rates |= band->bitrates[bit].hw_value; - rate_set >>= 1; - } - -#ifdef CONFIG_WL1271_HT - /* MCS rates indication are on bits 16 - 23 */ - rate_set >>= HW_HT_RATES_OFFSET - band->n_bitrates; - - for (bit = 0; bit < 8; bit++) { - if (rate_set & 0x1) - enabled_rates |= (CONF_HW_BIT_RATE_MCS_0 << bit); - rate_set >>= 1; - } -#endif - - return enabled_rates; -} - -static void handle_tx_low_watermark(struct wl1271 *wl) -{ - unsigned long flags; - - if (test_bit(WL1271_FLAG_TX_QUEUE_STOPPED, &wl->flags) && - skb_queue_len(&wl->tx_queue) <= WL1271_TX_QUEUE_LOW_WATERMARK) { - /* firmware buffer has space, restart queues */ - spin_lock_irqsave(&wl->wl_lock, flags); - ieee80211_wake_queues(wl->hw); - clear_bit(WL1271_FLAG_TX_QUEUE_STOPPED, &wl->flags); - spin_unlock_irqrestore(&wl->wl_lock, flags); - } -} - -void wl1271_tx_work_locked(struct wl1271 *wl) -{ - struct sk_buff *skb; - bool woken_up = false; - u32 sta_rates = 0; - u32 buf_offset = 0; - bool sent_packets = false; - int ret; - - /* check if the rates supported by the AP have changed */ - if (unlikely(test_and_clear_bit(WL1271_FLAG_STA_RATES_CHANGED, - &wl->flags))) { - unsigned long flags; - - spin_lock_irqsave(&wl->wl_lock, flags); - sta_rates = wl->sta_rate_set; - spin_unlock_irqrestore(&wl->wl_lock, flags); - } - - if (unlikely(wl->state == WL1271_STATE_OFF)) - goto out; - - /* if rates have changed, re-configure the rate policy */ - if (unlikely(sta_rates)) { - ret = wl1271_ps_elp_wakeup(wl, false); - if (ret < 0) - goto out; - woken_up = true; - - wl->rate_set = wl1271_tx_enabled_rates_get(wl, sta_rates); - wl1271_acx_rate_policies(wl); - } - - while ((skb = skb_dequeue(&wl->tx_queue))) { - if (!woken_up) { - ret = wl1271_ps_elp_wakeup(wl, false); - if (ret < 0) - goto out_ack; - woken_up = true; - } - - ret = wl1271_prepare_tx_frame(wl, skb, buf_offset); - if (ret == -EAGAIN) { - /* - * Aggregation buffer is full. - * Flush buffer and try again. - */ - skb_queue_head(&wl->tx_queue, skb); - wl1271_write(wl, WL1271_SLV_MEM_DATA, wl->aggr_buf, - buf_offset, true); - sent_packets = true; - buf_offset = 0; - continue; - } else if (ret == -EBUSY) { - /* - * Firmware buffer is full. - * Queue back last skb, and stop aggregating. - */ - skb_queue_head(&wl->tx_queue, skb); - /* No work left, avoid scheduling redundant tx work */ - set_bit(WL1271_FLAG_FW_TX_BUSY, &wl->flags); - goto out_ack; - } else if (ret < 0) { - dev_kfree_skb(skb); - goto out_ack; - } - buf_offset += ret; - wl->tx_packets_count++; - } - -out_ack: - if (buf_offset) { - wl1271_write(wl, WL1271_SLV_MEM_DATA, wl->aggr_buf, - buf_offset, true); - sent_packets = true; - } - if (sent_packets) { - /* interrupt the firmware with the new packets */ - wl1271_write32(wl, WL1271_HOST_WR_ACCESS, wl->tx_packets_count); - handle_tx_low_watermark(wl); - } - -out: - if (woken_up) - wl1271_ps_elp_sleep(wl); -} - -void wl1271_tx_work(struct work_struct *work) -{ - struct wl1271 *wl = container_of(work, struct wl1271, tx_work); - - mutex_lock(&wl->mutex); - wl1271_tx_work_locked(wl); - mutex_unlock(&wl->mutex); -} - -static void wl1271_tx_complete_packet(struct wl1271 *wl, - struct wl1271_tx_hw_res_descr *result) -{ - struct ieee80211_tx_info *info; - struct sk_buff *skb; - int id = result->id; - int rate = -1; - u8 retries = 0; - - /* check for id legality */ - if (unlikely(id >= ACX_TX_DESCRIPTORS || wl->tx_frames[id] == NULL)) { - wl1271_warning("TX result illegal id: %d", id); - return; - } - - skb = wl->tx_frames[id]; - info = IEEE80211_SKB_CB(skb); - - /* update the TX status info */ - if (result->status == TX_SUCCESS) { - if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) - info->flags |= IEEE80211_TX_STAT_ACK; - rate = wl1271_rate_to_idx(result->rate_class_index, wl->band); - retries = result->ack_failures; - } else if (result->status == TX_RETRY_EXCEEDED) { - wl->stats.excessive_retries++; - retries = result->ack_failures; - } - - info->status.rates[0].idx = rate; - info->status.rates[0].count = retries; - info->status.rates[0].flags = 0; - info->status.ack_signal = -1; - - wl->stats.retry_count += result->ack_failures; - - /* update security sequence number */ - wl->tx_security_seq += (result->lsb_security_sequence_number - - wl->tx_security_last_seq); - wl->tx_security_last_seq = result->lsb_security_sequence_number; - - /* remove private header from packet */ - skb_pull(skb, sizeof(struct wl1271_tx_hw_descr)); - - /* remove TKIP header space if present */ - if (info->control.hw_key && - info->control.hw_key->cipher == WLAN_CIPHER_SUITE_TKIP) { - int hdrlen = ieee80211_get_hdrlen_from_skb(skb); - memmove(skb->data + WL1271_TKIP_IV_SPACE, skb->data, hdrlen); - skb_pull(skb, WL1271_TKIP_IV_SPACE); - } - - wl1271_debug(DEBUG_TX, "tx status id %u skb 0x%p failures %u rate 0x%x" - " status 0x%x", - result->id, skb, result->ack_failures, - result->rate_class_index, result->status); - - /* return the packet to the stack */ - ieee80211_tx_status(wl->hw, skb); - wl1271_free_tx_id(wl, result->id); -} - -/* Called upon reception of a TX complete interrupt */ -void wl1271_tx_complete(struct wl1271 *wl) -{ - struct wl1271_acx_mem_map *memmap = - (struct wl1271_acx_mem_map *)wl->target_mem_map; - u32 count, fw_counter; - u32 i; - - /* read the tx results from the chipset */ - wl1271_read(wl, le32_to_cpu(memmap->tx_result), - wl->tx_res_if, sizeof(*wl->tx_res_if), false); - fw_counter = le32_to_cpu(wl->tx_res_if->tx_result_fw_counter); - - /* write host counter to chipset (to ack) */ - wl1271_write32(wl, le32_to_cpu(memmap->tx_result) + - offsetof(struct wl1271_tx_hw_res_if, - tx_result_host_counter), fw_counter); - - count = fw_counter - wl->tx_results_count; - wl1271_debug(DEBUG_TX, "tx_complete received, packets: %d", count); - - /* verify that the result buffer is not getting overrun */ - if (unlikely(count > TX_HW_RESULT_QUEUE_LEN)) - wl1271_warning("TX result overflow from chipset: %d", count); - - /* process the results */ - for (i = 0; i < count; i++) { - struct wl1271_tx_hw_res_descr *result; - u8 offset = wl->tx_results_count & TX_HW_RESULT_QUEUE_LEN_MASK; - - /* process the packet */ - result = &(wl->tx_res_if->tx_results_queue[offset]); - wl1271_tx_complete_packet(wl, result); - - wl->tx_results_count++; - } -} - -/* caller must hold wl->mutex */ -void wl1271_tx_reset(struct wl1271 *wl) -{ - int i; - struct sk_buff *skb; - - /* TX failure */ - while ((skb = skb_dequeue(&wl->tx_queue))) { - wl1271_debug(DEBUG_TX, "freeing skb 0x%p", skb); - ieee80211_tx_status(wl->hw, skb); - } - - /* - * Make sure the driver is at a consistent state, in case this - * function is called from a context other than interface removal. - */ - handle_tx_low_watermark(wl); - - for (i = 0; i < ACX_TX_DESCRIPTORS; i++) - if (wl->tx_frames[i] != NULL) { - skb = wl->tx_frames[i]; - wl1271_free_tx_id(wl, i); - wl1271_debug(DEBUG_TX, "freeing skb 0x%p", skb); - ieee80211_tx_status(wl->hw, skb); - } -} - -#define WL1271_TX_FLUSH_TIMEOUT 500000 - -/* caller must *NOT* hold wl->mutex */ -void wl1271_tx_flush(struct wl1271 *wl) -{ - unsigned long timeout; - timeout = jiffies + usecs_to_jiffies(WL1271_TX_FLUSH_TIMEOUT); - - while (!time_after(jiffies, timeout)) { - mutex_lock(&wl->mutex); - wl1271_debug(DEBUG_TX, "flushing tx buffer: %d", - wl->tx_frames_cnt); - if ((wl->tx_frames_cnt == 0) && - skb_queue_empty(&wl->tx_queue)) { - mutex_unlock(&wl->mutex); - return; - } - mutex_unlock(&wl->mutex); - msleep(1); - } - - wl1271_warning("Unable to flush all TX buffers, timed out."); -} diff --git a/drivers/net/wireless/wl12xx/wl1271_tx.h b/drivers/net/wireless/wl12xx/wl1271_tx.h deleted file mode 100644 index 9dc6f228c0d..00000000000 --- a/drivers/net/wireless/wl12xx/wl1271_tx.h +++ /dev/null @@ -1,150 +0,0 @@ -/* - * This file is part of wl1271 - * - * Copyright (C) 1998-2009 Texas Instruments. All rights reserved. - * Copyright (C) 2009 Nokia Corporation - * - * Contact: Luciano Coelho - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __WL1271_TX_H__ -#define __WL1271_TX_H__ - -#define TX_HW_BLOCK_SPARE 2 -#define TX_HW_BLOCK_SIZE 252 - -#define TX_HW_MGMT_PKT_LIFETIME_TU 2000 -/* The chipset reference driver states, that the "aid" value 1 - * is for infra-BSS, but is still always used */ -#define TX_HW_DEFAULT_AID 1 - -#define TX_HW_ATTR_SAVE_RETRIES BIT(0) -#define TX_HW_ATTR_HEADER_PAD BIT(1) -#define TX_HW_ATTR_SESSION_COUNTER (BIT(2) | BIT(3) | BIT(4)) -#define TX_HW_ATTR_RATE_POLICY (BIT(5) | BIT(6) | BIT(7) | \ - BIT(8) | BIT(9)) -#define TX_HW_ATTR_LAST_WORD_PAD (BIT(10) | BIT(11)) -#define TX_HW_ATTR_TX_CMPLT_REQ BIT(12) - -#define TX_HW_ATTR_OFST_SAVE_RETRIES 0 -#define TX_HW_ATTR_OFST_HEADER_PAD 1 -#define TX_HW_ATTR_OFST_SESSION_COUNTER 2 -#define TX_HW_ATTR_OFST_RATE_POLICY 5 -#define TX_HW_ATTR_OFST_LAST_WORD_PAD 10 -#define TX_HW_ATTR_OFST_TX_CMPLT_REQ 12 - -#define TX_HW_RESULT_QUEUE_LEN 16 -#define TX_HW_RESULT_QUEUE_LEN_MASK 0xf - -#define WL1271_TX_ALIGN_TO 4 -#define WL1271_TX_ALIGN(len) (((len) + WL1271_TX_ALIGN_TO - 1) & \ - ~(WL1271_TX_ALIGN_TO - 1)) -#define WL1271_TKIP_IV_SPACE 4 - -struct wl1271_tx_hw_descr { - /* Length of packet in words, including descriptor+header+data */ - __le16 length; - /* Number of extra memory blocks to allocate for this packet in - addition to the number of blocks derived from the packet length */ - u8 extra_mem_blocks; - /* Total number of memory blocks allocated by the host for this packet. - Must be equal or greater than the actual blocks number allocated by - HW!! */ - u8 total_mem_blocks; - /* Device time (in us) when the packet arrived to the driver */ - __le32 start_time; - /* Max delay in TUs until transmission. The last device time the - packet can be transmitted is: startTime+(1024*LifeTime) */ - __le16 life_time; - /* Bitwise fields - see TX_ATTR... definitions above. */ - __le16 tx_attr; - /* Packet identifier used also in the Tx-Result. */ - u8 id; - /* The packet TID value (as User-Priority) */ - u8 tid; - /* Identifier of the remote STA in IBSS, 1 in infra-BSS */ - u8 aid; - u8 reserved; -} __packed; - -enum wl1271_tx_hw_res_status { - TX_SUCCESS = 0, - TX_HW_ERROR = 1, - TX_DISABLED = 2, - TX_RETRY_EXCEEDED = 3, - TX_TIMEOUT = 4, - TX_KEY_NOT_FOUND = 5, - TX_PEER_NOT_FOUND = 6, - TX_SESSION_MISMATCH = 7 -}; - -struct wl1271_tx_hw_res_descr { - /* Packet Identifier - same value used in the Tx descriptor.*/ - u8 id; - /* The status of the transmission, indicating success or one of - several possible reasons for failure. */ - u8 status; - /* Total air access duration including all retrys and overheads.*/ - __le16 medium_usage; - /* The time passed from host xfer to Tx-complete.*/ - __le32 fw_handling_time; - /* Total media delay - (from 1st EDCA AIFS counter until TX Complete). */ - __le32 medium_delay; - /* LS-byte of last TKIP seq-num (saved per AC for recovery). */ - u8 lsb_security_sequence_number; - /* Retry count - number of transmissions without successful ACK.*/ - u8 ack_failures; - /* The rate that succeeded getting ACK - (Valid only if status=SUCCESS). */ - u8 rate_class_index; - /* for 4-byte alignment. */ - u8 spare; -} __packed; - -struct wl1271_tx_hw_res_if { - __le32 tx_result_fw_counter; - __le32 tx_result_host_counter; - struct wl1271_tx_hw_res_descr tx_results_queue[TX_HW_RESULT_QUEUE_LEN]; -} __packed; - -static inline int wl1271_tx_get_queue(int queue) -{ - switch (queue) { - case 0: - return CONF_TX_AC_VO; - case 1: - return CONF_TX_AC_VI; - case 2: - return CONF_TX_AC_BE; - case 3: - return CONF_TX_AC_BK; - default: - return CONF_TX_AC_BE; - } -} - -void wl1271_tx_work(struct work_struct *work); -void wl1271_tx_work_locked(struct wl1271 *wl); -void wl1271_tx_complete(struct wl1271 *wl); -void wl1271_tx_reset(struct wl1271 *wl); -void wl1271_tx_flush(struct wl1271 *wl); -u8 wl1271_rate_to_idx(int rate, enum ieee80211_band band); -u32 wl1271_tx_enabled_rates_get(struct wl1271 *wl, u32 rate_set); - -#endif diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h new file mode 100644 index 00000000000..3c836e6063e --- /dev/null +++ b/drivers/net/wireless/wl12xx/wl12xx.h @@ -0,0 +1,523 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 1998-2009 Texas Instruments. All rights reserved. + * Copyright (C) 2008-2009 Nokia Corporation + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __WL12XX_H__ +#define __WL12XX_H__ + +#include +#include +#include +#include +#include +#include + +#include "conf.h" +#include "ini.h" + +#define DRIVER_NAME "wl1271" +#define DRIVER_PREFIX DRIVER_NAME ": " + +enum { + DEBUG_NONE = 0, + DEBUG_IRQ = BIT(0), + DEBUG_SPI = BIT(1), + DEBUG_BOOT = BIT(2), + DEBUG_MAILBOX = BIT(3), + DEBUG_TESTMODE = BIT(4), + DEBUG_EVENT = BIT(5), + DEBUG_TX = BIT(6), + DEBUG_RX = BIT(7), + DEBUG_SCAN = BIT(8), + DEBUG_CRYPT = BIT(9), + DEBUG_PSM = BIT(10), + DEBUG_MAC80211 = BIT(11), + DEBUG_CMD = BIT(12), + DEBUG_ACX = BIT(13), + DEBUG_SDIO = BIT(14), + DEBUG_FILTERS = BIT(15), + DEBUG_ADHOC = BIT(16), + DEBUG_ALL = ~0, +}; + +#define DEBUG_LEVEL (DEBUG_NONE) + +#define DEBUG_DUMP_LIMIT 1024 + +#define wl1271_error(fmt, arg...) \ + printk(KERN_ERR DRIVER_PREFIX "ERROR " fmt "\n", ##arg) + +#define wl1271_warning(fmt, arg...) \ + printk(KERN_WARNING DRIVER_PREFIX "WARNING " fmt "\n", ##arg) + +#define wl1271_notice(fmt, arg...) \ + printk(KERN_INFO DRIVER_PREFIX fmt "\n", ##arg) + +#define wl1271_info(fmt, arg...) \ + printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg) + +#define wl1271_debug(level, fmt, arg...) \ + do { \ + if (level & DEBUG_LEVEL) \ + printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg); \ + } while (0) + +#define wl1271_dump(level, prefix, buf, len) \ + do { \ + if (level & DEBUG_LEVEL) \ + print_hex_dump(KERN_DEBUG, DRIVER_PREFIX prefix, \ + DUMP_PREFIX_OFFSET, 16, 1, \ + buf, \ + min_t(size_t, len, DEBUG_DUMP_LIMIT), \ + 0); \ + } while (0) + +#define wl1271_dump_ascii(level, prefix, buf, len) \ + do { \ + if (level & DEBUG_LEVEL) \ + print_hex_dump(KERN_DEBUG, DRIVER_PREFIX prefix, \ + DUMP_PREFIX_OFFSET, 16, 1, \ + buf, \ + min_t(size_t, len, DEBUG_DUMP_LIMIT), \ + true); \ + } while (0) + +#define WL1271_DEFAULT_RX_CONFIG (CFG_UNI_FILTER_EN | \ + CFG_BSSID_FILTER_EN | \ + CFG_MC_FILTER_EN) + +#define WL1271_DEFAULT_RX_FILTER (CFG_RX_RCTS_ACK | CFG_RX_PRSP_EN | \ + CFG_RX_MGMT_EN | CFG_RX_DATA_EN | \ + CFG_RX_CTL_EN | CFG_RX_BCN_EN | \ + CFG_RX_AUTH_EN | CFG_RX_ASSOC_EN) + +#define WL1271_FW_NAME "wl1271-fw.bin" +#define WL1271_NVS_NAME "wl1271-nvs.bin" + +#define WL1271_TX_SECURITY_LO16(s) ((u16)((s) & 0xffff)) +#define WL1271_TX_SECURITY_HI32(s) ((u32)(((s) >> 16) & 0xffffffff)) + +#define WL1271_CIPHER_SUITE_GEM 0x00147201 + +#define WL1271_BUSY_WORD_CNT 1 +#define WL1271_BUSY_WORD_LEN (WL1271_BUSY_WORD_CNT * sizeof(u32)) + +#define WL1271_ELP_HW_STATE_ASLEEP 0 +#define WL1271_ELP_HW_STATE_IRQ 1 + +#define WL1271_DEFAULT_BEACON_INT 100 +#define WL1271_DEFAULT_DTIM_PERIOD 1 + +#define ACX_TX_DESCRIPTORS 32 + +#define WL1271_AGGR_BUFFER_SIZE (4 * PAGE_SIZE) + +enum wl1271_state { + WL1271_STATE_OFF, + WL1271_STATE_ON, + WL1271_STATE_PLT, +}; + +enum wl1271_partition_type { + PART_DOWN, + PART_WORK, + PART_DRPW, + + PART_TABLE_LEN +}; + +struct wl1271_partition { + u32 size; + u32 start; +}; + +struct wl1271_partition_set { + struct wl1271_partition mem; + struct wl1271_partition reg; + struct wl1271_partition mem2; + struct wl1271_partition mem3; +}; + +struct wl1271; + +/* FIXME: I'm not sure about this structure name */ +struct wl1271_chip { + u32 id; + char fw_ver[21]; +}; + +struct wl1271_stats { + struct acx_statistics *fw_stats; + unsigned long fw_stats_update; + + unsigned int retry_count; + unsigned int excessive_retries; +}; + +struct wl1271_debugfs { + struct dentry *rootdir; + struct dentry *fw_statistics; + + struct dentry *tx_internal_desc_overflow; + + struct dentry *rx_out_of_mem; + struct dentry *rx_hdr_overflow; + struct dentry *rx_hw_stuck; + struct dentry *rx_dropped; + struct dentry *rx_fcs_err; + struct dentry *rx_xfr_hint_trig; + struct dentry *rx_path_reset; + struct dentry *rx_reset_counter; + + struct dentry *dma_rx_requested; + struct dentry *dma_rx_errors; + struct dentry *dma_tx_requested; + struct dentry *dma_tx_errors; + + struct dentry *isr_cmd_cmplt; + struct dentry *isr_fiqs; + struct dentry *isr_rx_headers; + struct dentry *isr_rx_mem_overflow; + struct dentry *isr_rx_rdys; + struct dentry *isr_irqs; + struct dentry *isr_tx_procs; + struct dentry *isr_decrypt_done; + struct dentry *isr_dma0_done; + struct dentry *isr_dma1_done; + struct dentry *isr_tx_exch_complete; + struct dentry *isr_commands; + struct dentry *isr_rx_procs; + struct dentry *isr_hw_pm_mode_changes; + struct dentry *isr_host_acknowledges; + struct dentry *isr_pci_pm; + struct dentry *isr_wakeups; + struct dentry *isr_low_rssi; + + struct dentry *wep_addr_key_count; + struct dentry *wep_default_key_count; + /* skipping wep.reserved */ + struct dentry *wep_key_not_found; + struct dentry *wep_decrypt_fail; + struct dentry *wep_packets; + struct dentry *wep_interrupt; + + struct dentry *pwr_ps_enter; + struct dentry *pwr_elp_enter; + struct dentry *pwr_missing_bcns; + struct dentry *pwr_wake_on_host; + struct dentry *pwr_wake_on_timer_exp; + struct dentry *pwr_tx_with_ps; + struct dentry *pwr_tx_without_ps; + struct dentry *pwr_rcvd_beacons; + struct dentry *pwr_power_save_off; + struct dentry *pwr_enable_ps; + struct dentry *pwr_disable_ps; + struct dentry *pwr_fix_tsf_ps; + /* skipping cont_miss_bcns_spread for now */ + struct dentry *pwr_rcvd_awake_beacons; + + struct dentry *mic_rx_pkts; + struct dentry *mic_calc_failure; + + struct dentry *aes_encrypt_fail; + struct dentry *aes_decrypt_fail; + struct dentry *aes_encrypt_packets; + struct dentry *aes_decrypt_packets; + struct dentry *aes_encrypt_interrupt; + struct dentry *aes_decrypt_interrupt; + + struct dentry *event_heart_beat; + struct dentry *event_calibration; + struct dentry *event_rx_mismatch; + struct dentry *event_rx_mem_empty; + struct dentry *event_rx_pool; + struct dentry *event_oom_late; + struct dentry *event_phy_transmit_error; + struct dentry *event_tx_stuck; + + struct dentry *ps_pspoll_timeouts; + struct dentry *ps_upsd_timeouts; + struct dentry *ps_upsd_max_sptime; + struct dentry *ps_upsd_max_apturn; + struct dentry *ps_pspoll_max_apturn; + struct dentry *ps_pspoll_utilization; + struct dentry *ps_upsd_utilization; + + struct dentry *rxpipe_rx_prep_beacon_drop; + struct dentry *rxpipe_descr_host_int_trig_rx_data; + struct dentry *rxpipe_beacon_buffer_thres_host_int_trig_rx_data; + struct dentry *rxpipe_missed_beacon_host_int_trig_rx_data; + struct dentry *rxpipe_tx_xfr_host_int_trig_rx_data; + + struct dentry *tx_queue_len; + + struct dentry *retry_count; + struct dentry *excessive_retries; + struct dentry *gpio_power; +}; + +#define NUM_TX_QUEUES 4 +#define NUM_RX_PKT_DESC 8 + +/* FW status registers */ +struct wl1271_fw_status { + __le32 intr; + u8 fw_rx_counter; + u8 drv_rx_counter; + u8 reserved; + u8 tx_results_counter; + __le32 rx_pkt_descs[NUM_RX_PKT_DESC]; + __le32 tx_released_blks[NUM_TX_QUEUES]; + __le32 fw_localtime; + __le32 padding[2]; +} __packed; + +struct wl1271_rx_mem_pool_addr { + u32 addr; + u32 addr_extra; +}; + +struct wl1271_scan { + struct cfg80211_scan_request *req; + bool *scanned_ch; + bool failed; + u8 state; + u8 ssid[IW_ESSID_MAX_SIZE+1]; + size_t ssid_len; +}; + +struct wl1271_if_operations { + void (*read)(struct wl1271 *wl, int addr, void *buf, size_t len, + bool fixed); + void (*write)(struct wl1271 *wl, int addr, void *buf, size_t len, + bool fixed); + void (*reset)(struct wl1271 *wl); + void (*init)(struct wl1271 *wl); + int (*power)(struct wl1271 *wl, bool enable); + struct device* (*dev)(struct wl1271 *wl); + void (*enable_irq)(struct wl1271 *wl); + void (*disable_irq)(struct wl1271 *wl); +}; + +struct wl1271 { + struct platform_device *plat_dev; + struct ieee80211_hw *hw; + bool mac80211_registered; + + void *if_priv; + + struct wl1271_if_operations *if_ops; + + void (*set_power)(bool enable); + int irq; + int ref_clock; + + spinlock_t wl_lock; + + enum wl1271_state state; + struct mutex mutex; + +#define WL1271_FLAG_STA_RATES_CHANGED (0) +#define WL1271_FLAG_STA_ASSOCIATED (1) +#define WL1271_FLAG_JOINED (2) +#define WL1271_FLAG_GPIO_POWER (3) +#define WL1271_FLAG_TX_QUEUE_STOPPED (4) +#define WL1271_FLAG_IN_ELP (5) +#define WL1271_FLAG_PSM (6) +#define WL1271_FLAG_PSM_REQUESTED (7) +#define WL1271_FLAG_IRQ_PENDING (8) +#define WL1271_FLAG_IRQ_RUNNING (9) +#define WL1271_FLAG_IDLE (10) +#define WL1271_FLAG_IDLE_REQUESTED (11) +#define WL1271_FLAG_PSPOLL_FAILURE (12) +#define WL1271_FLAG_STA_STATE_SENT (13) +#define WL1271_FLAG_FW_TX_BUSY (14) + unsigned long flags; + + struct wl1271_partition_set part; + + struct wl1271_chip chip; + + int cmd_box_addr; + int event_box_addr; + + u8 *fw; + size_t fw_len; + struct wl1271_nvs_file *nvs; + size_t nvs_len; + + s8 hw_pg_ver; + + u8 bssid[ETH_ALEN]; + u8 mac_addr[ETH_ALEN]; + u8 bss_type; + u8 set_bss_type; + u8 ssid[IW_ESSID_MAX_SIZE + 1]; + u8 ssid_len; + int channel; + + struct wl1271_acx_mem_map *target_mem_map; + + /* Accounting for allocated / available TX blocks on HW */ + u32 tx_blocks_freed[NUM_TX_QUEUES]; + u32 tx_blocks_available; + u32 tx_results_count; + + /* Transmitted TX packets counter for chipset interface */ + u32 tx_packets_count; + + /* Time-offset between host and chipset clocks */ + s64 time_offset; + + /* Session counter for the chipset */ + int session_counter; + + /* Frames scheduled for transmission, not handled yet */ + struct sk_buff_head tx_queue; + + struct work_struct tx_work; + + /* Pending TX frames */ + unsigned long tx_frames_map[BITS_TO_LONGS(ACX_TX_DESCRIPTORS)]; + struct sk_buff *tx_frames[ACX_TX_DESCRIPTORS]; + int tx_frames_cnt; + + /* Security sequence number counters */ + u8 tx_security_last_seq; + s64 tx_security_seq; + + /* FW Rx counter */ + u32 rx_counter; + + /* Rx memory pool address */ + struct wl1271_rx_mem_pool_addr rx_mem_pool_addr; + + /* Intermediate buffer, used for packet aggregation */ + u8 *aggr_buf; + + /* The target interrupt mask */ + struct work_struct irq_work; + + /* Hardware recovery work */ + struct work_struct recovery_work; + + /* The mbox event mask */ + u32 event_mask; + + /* Mailbox pointers */ + u32 mbox_ptr[2]; + + /* Are we currently scanning */ + struct wl1271_scan scan; + struct delayed_work scan_complete_work; + + /* Our association ID */ + u16 aid; + + /* + * currently configured rate set: + * bits 0-15 - 802.11abg rates + * bits 16-23 - 802.11n MCS index mask + * support only 1 stream, thus only 8 bits for the MCS rates (0-7). + */ + u32 sta_rate_set; + u32 basic_rate_set; + u32 basic_rate; + u32 rate_set; + + /* The current band */ + enum ieee80211_band band; + + /* Beaconing interval (needed for ad-hoc) */ + u32 beacon_int; + + /* Default key (for WEP) */ + u32 default_key; + + unsigned int filters; + unsigned int rx_config; + unsigned int rx_filter; + + struct completion *elp_compl; + struct delayed_work elp_work; + struct delayed_work pspoll_work; + + /* counter for ps-poll delivery failures */ + int ps_poll_failures; + + /* retry counter for PSM entries */ + u8 psm_entry_retry; + + /* in dBm */ + int power_level; + + int rssi_thold; + int last_rssi_event; + + struct wl1271_stats stats; + struct wl1271_debugfs debugfs; + + __le32 buffer_32; + u32 buffer_cmd; + u32 buffer_busyword[WL1271_BUSY_WORD_CNT]; + + struct wl1271_fw_status *fw_status; + struct wl1271_tx_hw_res_if *tx_res_if; + + struct ieee80211_vif *vif; + + /* Current chipset configuration */ + struct conf_drv_settings conf; + + bool sg_enabled; + + bool enable_11a; + + struct list_head list; + + /* Most recently reported noise in dBm */ + s8 noise; +}; + +int wl1271_plt_start(struct wl1271 *wl); +int wl1271_plt_stop(struct wl1271 *wl); + +#define JOIN_TIMEOUT 5000 /* 5000 milliseconds to join */ + +#define SESSION_COUNTER_MAX 7 /* maximum value for the session counter */ + +#define WL1271_DEFAULT_POWER_LEVEL 0 + +#define WL1271_TX_QUEUE_LOW_WATERMARK 10 +#define WL1271_TX_QUEUE_HIGH_WATERMARK 25 + +/* WL1271 needs a 200ms sleep after power on, and a 20ms sleep before power + on in case is has been shut down shortly before */ +#define WL1271_PRE_POWER_ON_SLEEP 20 /* in miliseconds */ +#define WL1271_POWER_ON_SLEEP 200 /* in miliseconds */ + +/* Macros to handle wl1271.sta_rate_set */ +#define HW_BG_RATES_MASK 0xffff +#define HW_HT_RATES_OFFSET 16 + +#endif -- cgit v1.2.3-18-g5258