| Age | Commit message (Collapse) | Author |
|---|
|
After commit a2766325cf9f9, the error pfn is replaced by the
error code, it need not be released anymore
[ The patch has been compiling tested for powerpc ]
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
There are two bugs:
- the 'error page' is forgot to be released
[ it is unneeded after commit a2766325cf9f9, for backport, we
still do kvm_release_pfn_clean for the error pfn ]
- guest pages are always released regardless of the unmapped page
(e,g, caused by hwpoison)
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
The parameter, 'kvm', is not used in gfn_to_pfn_memslot, we can happily remove
it
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
As pointed out by Jason Baron, when assigning a device to a guest
we first set the iommu domain pointer, which enables mapping
and unmapping of memory slots to the iommu. This leaves a window
where this path is enabled, but we haven't synchronized the iommu
mappings to the existing memory slots. Thus a slot being removed
at that point could send us down unexpected code paths removing
non-existent pinnings and iommu mappings. Take the slots_lock
around creating the iommu domain and initial mappings as well as
around iommu teardown to avoid this race.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
We've been adding new mappings, but not destroying old mappings.
This can lead to a page leak as pages are pinned using
get_user_pages, but only unpinned with put_page if they still
exist in the memslots list on vm shutdown. A memslot that is
destroyed while an iommu domain is enabled for the guest will
therefore result in an elevated page reference count that is
never cleared.
Additionally, without this fix, the iommu is only programmed
with the first translation for a gpa. This can result in
peer-to-peer errors if a mapping is destroyed and replaced by a
new mapping at the same gpa as the iommu will still be pointing
to the original, pinned memory address.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
module_param(bool) used to counter-intuitively take an int. In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.
It's time to remove the int/unsigned int option. For this version
it'll simply give a warning, but it'll break next kernel version.
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (53 commits)
iommu/amd: Set IOTLB invalidation timeout
iommu/amd: Init stats for iommu=pt
iommu/amd: Remove unnecessary cache flushes in amd_iommu_resume
iommu/amd: Add invalidate-context call-back
iommu/amd: Add amd_iommu_device_info() function
iommu/amd: Adapt IOMMU driver to PCI register name changes
iommu/amd: Add invalid_ppr callback
iommu/amd: Implement notifiers for IOMMUv2
iommu/amd: Implement IO page-fault handler
iommu/amd: Add routines to bind/unbind a pasid
iommu/amd: Implement device aquisition code for IOMMUv2
iommu/amd: Add driver stub for AMD IOMMUv2 support
iommu/amd: Add stat counter for IOMMUv2 events
iommu/amd: Add device errata handling
iommu/amd: Add function to get IOMMUv2 domain for pdev
iommu/amd: Implement function to send PPR completions
iommu/amd: Implement functions to manage GCR3 table
iommu/amd: Implement IOMMUv2 TLB flushing routines
iommu/amd: Add support for IOMMUv2 domain mode
iommu/amd: Add amd_iommu_domain_direct_map function
...
|
|
Introduce kvm_for_each_memslot to walk all valid memslot
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
When mapping a memory region, split it to page sizes as supported
by the iommu hardware. Always prefer bigger pages, when possible,
in order to reduce the TLB pressure.
The logic to do that is now added to the IOMMU core, so neither the iommu
drivers themselves nor users of the IOMMU API have to duplicate it.
This allows a more lenient granularity of mappings; traditionally the
IOMMU API took 'order' (of a page) as a mapping size, and directly let
the low level iommu drivers handle the mapping, but now that the IOMMU
core can split arbitrary memory regions into pages, we can remove this
limitation, so users don't have to split those regions by themselves.
Currently the supported page sizes are advertised once and they then
remain static. That works well for OMAP and MSM but it would probably
not fly well with intel's hardware, where the page size capabilities
seem to have the potential to be different between several DMA
remapping devices.
register_iommu() currently sets a default pgsize behavior, so we can convert
the IOMMU drivers in subsequent patches. After all the drivers
are converted, the temporary default settings will be removed.
Mainline users of the IOMMU API (kvm and omap-iovmm) are adopted
to deal with bytes instead of page order.
Many thanks to Joerg Roedel <Joerg.Roedel@amd.com> for significant review!
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Cc: David Brown <davidb@codeaurora.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <Joerg.Roedel@amd.com>
Cc: Stepan Moskovchenko <stepanm@codeaurora.org>
Cc: KyongHo Cho <pullip.cho@samsung.com>
Cc: Hiroshi DOYU <hdoyu@nvidia.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: kvm@vger.kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
This file has things like module_param_named() and MODULE_PARM_DESC()
so it needs the full module.h header present. Without it, you'll get:
CC arch/x86/kvm/../../../virt/kvm/iommu.o
virt/kvm/iommu.c:37: error: expected ‘)’ before ‘bool’
virt/kvm/iommu.c:39: error: expected ‘)’ before string constant
make[3]: *** [arch/x86/kvm/../../../virt/kvm/iommu.o] Error 1
make[2]: *** [arch/x86/kvm] Error 2
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
This was coming in via an implicit module.h (and its sub-includes)
before, but we'll be cleaning that up shortly. Call out the stat.h
include requirement in advance.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (33 commits)
iommu/core: Remove global iommu_ops and register_iommu
iommu/msm: Use bus_set_iommu instead of register_iommu
iommu/omap: Use bus_set_iommu instead of register_iommu
iommu/vt-d: Use bus_set_iommu instead of register_iommu
iommu/amd: Use bus_set_iommu instead of register_iommu
iommu/core: Use bus->iommu_ops in the iommu-api
iommu/core: Convert iommu_found to iommu_present
iommu/core: Add bus_type parameter to iommu_domain_alloc
Driver core: Add iommu_ops to bus_type
iommu/core: Define iommu_ops and register_iommu only with CONFIG_IOMMU_API
iommu/amd: Fix wrong shift direction
iommu/omap: always provide iommu debug code
iommu/core: let drivers know if an iommu fault handler isn't installed
iommu/core: export iommu_set_fault_handler()
iommu/omap: Fix build error with !IOMMU_SUPPORT
iommu/omap: Migrate to the generic fault report mechanism
iommu/core: Add fault reporting mechanism
iommu/core: Use PAGE_SIZE instead of hard-coded value
iommu/core: use the existing IS_ALIGNED macro
iommu/msm: ->unmap() should return order of unmapped page
...
Fixup trivial conflicts in drivers/iommu/Makefile: "move omap iommu to
dedicated iommu folder" vs "Rename the DMAR and INTR_REMAP config
options" just happened to touch lines next to each other.
|
|
With per-bus iommu_ops the iommu_found function needs to
work on a bus_type too. This patch adds a bus_type parameter
to that function and converts all call-places.
The function is also renamed to iommu_present because the
function now checks if an iommu is present for a given bus
and does not check for a global iommu anymore.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
This is necessary to store a pointer to the bus-specific
iommu_ops in the iommu-domain structure. It will be used
later to call into bus-specific iommu-ops.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Device drivers that create and destroy SR-IOV virtual functions via
calls to pci_enable_sriov() and pci_disable_sriov can cause catastrophic
failures if they attempt to destroy VFs while they are assigned to
guest virtual machines. By adding a flag for use by the KVM module
to indicate that a device is assigned a device driver can check that
flag and avoid destroying VFs while they are assigned and avoid system
failures.
CC: Ian Campbell <ijc@hellion.org.uk>
CC: Konrad Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
IOMMU interrupt remapping support provides a further layer of
isolation for device assignment by preventing arbitrary interrupt
block DMA writes by a malicious guest from reaching the host. By
default, we should require that the platform provides interrupt
remapping support, with an opt-in mechanism for existing behavior.
Both AMD IOMMU and Intel VT-d2 hardware support interrupt
remapping, however we currently only have software support on
the Intel side. Users wishing to re-enable device assignment
when interrupt remapping is not supported on the platform can
use the "allow_unsafe_assigned_interrupts=1" module option.
[avi: break long lines]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
For 32bit machines where the physical address width is
larger than the virtual address width the frame number types
in KVM may overflow. Fix this by changing them to u64.
[sfr: fix build on 32-bit ppc]
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
This patch fixes the following warning.
===================================================
[ INFO: suspicious rcu_dereference_check() usage. ]
---------------------------------------------------
include/linux/kvm_host.h:259 invoked rcu_dereference_check() without
protection!
other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 0
no locks held by qemu-system-x86/29679.
stack backtrace:
Pid: 29679, comm: qemu-system-x86 Not tainted 2.6.35-rc3+ #200
Call Trace:
[<ffffffff810a224e>] lockdep_rcu_dereference+0xa8/0xb1
[<ffffffffa018a06f>] kvm_iommu_unmap_memslots+0xc9/0xde [kvm]
[<ffffffffa018a0c4>] kvm_iommu_unmap_guest+0x40/0x4e [kvm]
[<ffffffffa018f772>] kvm_arch_destroy_vm+0x1a/0x186 [kvm]
[<ffffffffa01800d0>] kvm_put_kvm+0x110/0x167 [kvm]
[<ffffffffa0180ecc>] kvm_vcpu_release+0x18/0x1c [kvm]
[<ffffffff81156f5d>] fput+0x22a/0x3a0
[<ffffffff81152288>] filp_close+0xb4/0xcd
[<ffffffff8106599f>] put_files_struct+0x1b7/0x36b
[<ffffffff81065830>] ? put_files_struct+0x48/0x36b
[<ffffffff8131ee59>] ? do_raw_spin_unlock+0x118/0x160
[<ffffffff81065bc0>] exit_files+0x6d/0x75
[<ffffffff81068348>] do_exit+0x47d/0xc60
[<ffffffff8177e7b5>] ? _raw_spin_unlock_irq+0x30/0x36
[<ffffffff81068bfa>] do_group_exit+0xcf/0x134
[<ffffffff81080790>] get_signal_to_deliver+0x732/0x81d
[<ffffffff81095996>] ? cpu_clock+0x4e/0x60
[<ffffffff81002082>] do_notify_resume+0x117/0xc43
[<ffffffff810a2fa3>] ? trace_hardirqs_on+0xd/0xf
[<ffffffff81080d79>] ? sys_rt_sigtimedwait+0x2b5/0x3bf
[<ffffffff8177d9f2>] ? trace_hardirqs_off_thunk+0x3a/0x3c
[<ffffffff81003221>] ? sysret_signal+0x5/0x3d
[<ffffffff8100343b>] int_signal+0x12/0x17
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
This is obviously a left-over from the the old interface taking the
size. Apparently a mostly harmless issue with the current iommu_unmap
implementation.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
* 'kvm-updates/2.6.35' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (269 commits)
KVM: x86: Add missing locking to arch specific vcpu ioctls
KVM: PPC: Add missing vcpu_load()/vcpu_put() in vcpu ioctls
KVM: MMU: Segregate shadow pages with different cr0.wp
KVM: x86: Check LMA bit before set_efer
KVM: Don't allow lmsw to clear cr0.pe
KVM: Add cpuid.txt file
KVM: x86: Tell the guest we'll warn it about tsc stability
x86, paravirt: don't compute pvclock adjustments if we trust the tsc
x86: KVM guest: Try using new kvm clock msrs
KVM: x86: export paravirtual cpuid flags in KVM_GET_SUPPORTED_CPUID
KVM: x86: add new KVMCLOCK cpuid feature
KVM: x86: change msr numbers for kvmclock
x86, paravirt: Add a global synchronization point for pvclock
x86, paravirt: Enable pvclock flags in vcpu_time_info structure
KVM: x86: Inject #GP with the right rip on efer writes
KVM: SVM: Don't allow nested guest to VMMCALL into host
KVM: x86: Fix exception reinjection forced to true
KVM: Fix wallclock version writing race
KVM: MMU: Don't read pdptrs with mmu spinlock held in mmu_alloc_roots
KVM: VMX: enable VMXON check with SMX enabled (Intel TXT)
...
|
|
The RCU/SRCU API have already changed for proving RCU usage.
I got the following dmesg when PROVE_RCU=y because we used incorrect API.
This patch coverts rcu_deference() to srcu_dereference() or family API.
===================================================
[ INFO: suspicious rcu_dereference_check() usage. ]
---------------------------------------------------
arch/x86/kvm/mmu.c:3020 invoked rcu_dereference_check() without protection!
other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 0
2 locks held by qemu-system-x86/8550:
#0: (&kvm->slots_lock){+.+.+.}, at: [<ffffffffa011a6ac>] kvm_set_memory_region+0x29/0x50 [kvm]
#1: (&(&kvm->mmu_lock)->rlock){+.+...}, at: [<ffffffffa012262d>] kvm_arch_commit_memory_region+0xa6/0xe2 [kvm]
stack backtrace:
Pid: 8550, comm: qemu-system-x86 Not tainted 2.6.34-rc4-tip-01028-g939eab1 #27
Call Trace:
[<ffffffff8106c59e>] lockdep_rcu_dereference+0xaa/0xb3
[<ffffffffa012f6c1>] kvm_mmu_calculate_mmu_pages+0x44/0x7d [kvm]
[<ffffffffa012263e>] kvm_arch_commit_memory_region+0xb7/0xe2 [kvm]
[<ffffffffa011a5d7>] __kvm_set_memory_region+0x636/0x6e2 [kvm]
[<ffffffffa011a6ba>] kvm_set_memory_region+0x37/0x50 [kvm]
[<ffffffffa015e956>] vmx_set_tss_addr+0x46/0x5a [kvm_intel]
[<ffffffffa0126592>] kvm_arch_vm_ioctl+0x17a/0xcf8 [kvm]
[<ffffffff810a8692>] ? unlock_page+0x27/0x2c
[<ffffffff810bf879>] ? __do_fault+0x3a9/0x3e1
[<ffffffffa011b12f>] kvm_vm_ioctl+0x364/0x38d [kvm]
[<ffffffff81060cfa>] ? up_read+0x23/0x3d
[<ffffffff810f3587>] vfs_ioctl+0x32/0xa6
[<ffffffff810f3b19>] do_vfs_ioctl+0x495/0x4db
[<ffffffff810e6b2f>] ? fget_light+0xc2/0x241
[<ffffffff810e416c>] ? do_sys_open+0x104/0x116
[<ffffffff81382d6d>] ? retint_swapgs+0xe/0x13
[<ffffffff810f3ba6>] sys_ioctl+0x47/0x6a
[<ffffffff810021db>] system_call_fastpath+0x16/0x1b
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
This patch changes the implementation of of
kvm_iommu_map_pages to map the pages with the host page size
into the io virtual address space.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-By: Avi Kivity <avi@redhat.com>
|
|
Enable optional parameter (default 0) - PCI segment (or domain) besides
BDF, when assigning PCI device to guest.
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
Use two steps for memslot deletion: mark the slot invalid (which stops
instantiation of new shadow pages for that slot, but allows destruction),
then instantiate the new empty slot.
Also simplifies kvm_handle_hva locking.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
So its possible to iommu map a memslot before making it visible to
kvm.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
Have a pointer to an allocated region inside struct kvm.
[alex: fix ppc book 3s]
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
Memory aliases with different memory type is a problem for guest. For the guest
without assigned device, the memory type of guest memory would always been the
same as host(WB); but for the assigned device, some part of memory may be used
as DMA and then set to uncacheable memory type(UC/WC), which would be a conflict of
host memory type then be a potential issue.
Snooping control can guarantee the cache correctness of memory go through the
DMA engine of VT-d.
[avi: fix build on ia64]
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
kvm->slots_lock is outer to kvm->lock, so take slots_lock
in kvm_vm_ioctl_assign_device() before taking kvm->lock,
rather than taking it in kvm_iommu_map_memslots().
Cc: stable@kernel.org
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
This fixes a compile warning about a variable thats maybe used
uninitialized in the function.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Impact: file renamed
The code in the vtd.c file can be reused for other IOMMUs as well. So
rename it to make it clear that it handle more than VT-d.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
