| Age | Commit message (Collapse) | Author |
|---|
|
Add util/trace-event-info.c which handles ftrace file IO from
debugfs and provides general helpers to fetch/save ftrace
events informations.
This file is a rename of the trace-cmd.c file from the
trace-cmd tools, written by Steven Rostedt and Josh Triplett,
originated from the git tree:
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git
This is a perf tools integration.
For now, ftrace events information is saved in a separate file
than the standard perf.data
[fweisbec@gmail.com: various changes for perf tools integration]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Jon Masters <jonathan@jonmasters.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Zhaolei <zhaolei@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Anton Blanchard <anton@samba.org>
LKML-Reference: <1250518688-7207-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Librarize trace_event() helper so that perf trace can use it
too. Also clean up the debug.h includes a bit.
It's not good to have it included in perf.h because it doesn't
make it flexible against other headers it may need (headers
that can also depend on perf.h and then create a recursive
header dependency).
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1250453149-664-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Librarize the sample type and attr fetching from perf data file
headers so that we can also use it from perf trace.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1250448997-30715-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Annotate and report share the same flags to filter events
considering their context (kernel, user, hypervisor).
Both tools have their own definitions of these flags. Factorize
them out into the event headers file.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1250445414-29237-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
We have two users of dprintf: report and annotate. Another one
is coming with perf trace. Then factorize it into the debug
file.
While at it, rename dprintf() to dump_printf() so that it
doesn't conflicts with its libc homograph.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1250443461-28130-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The soon coming perf trace needs to use printf with dynamically
built formats.
But we are using -Wformat=2 which is a shortcut for the
following set: -Wformat -Wformat-security -Wformat-y2k
-Wformat-nonliteral
-Wformat-nonliteral warns when it can't check formats because
they are not builtin constant strings, but we want to feature
dynamic formats. What we want instead is Wformat=2 minus
-Wformat-nonliteral, which is what this patch does.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1250437927-25490-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Up our defences a bit.
Suggested-by: Arjan van de Ven <arjan@infradead.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Related to a shadowed variable bug fix Valdis Kletnieks noticed
that perf does not get built with -Wshadow, which could have
helped us avoid the bug.
So enable -Wshadow and also enable the following warnings on
perf builds, in addition to the already enabled -Wall -Wextra
-std=gnu99 warnings:
-Wcast-align
-Wformat=2
-Wshadow
-Winit-self
-Wpacked
-Wredundant-decls
-Wstack-protector
-Wstrict-aliasing=3
-Wswitch-default
-Wswitch-enum
-Wno-system-headers
-Wundef
-Wvolatile-register-var
-Wwrite-strings
-Wbad-function-cast
-Wmissing-declarations
-Wmissing-prototypes
-Wnested-externs
-Wold-style-definition
-Wstrict-prototypes
-Wdeclaration-after-statement
And change/fix the perf code to build cleanly under GCC 4.3.2.
The list of warnings enablement is rather arbitrary: it's based
on my (quick) reading of the GCC manpages and trying them on
perf.
I categorized the warnings based on individually enabling them
and looking whether they trigger something in the perf build.
If i liked those warnings (i.e. if they trigger for something
that arguably could be improved) i enabled the warning.
If the warnings seemed to come from language laywers spamming
the build with tons of nuisance warnings i generally kept them
off. Most of the sign conversion related warnings were in
this category. (A second patch enabling some of the sign
warnings might be welcome - sign bugs can be nasty.)
I also kept warnings that seem to make sense from their manpage
description and which produced no actual warnings on our code
base. These warnings might still be turned off if they end up
being a nuisance.
I also left out a few warnings that are not supported in older
compilers.
[ Note that these changes might break the build on older
compilers i did not test, or on non-x86 architectures that
produce different warnings, so more testing would be welcome. ]
Reported-by: Valdis.Kletnieks@vt.edu
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Factorize the thread management code used by perf-annotate and
perf-report in dedicated source and header files.
v2: pass last_match by address so that it can actually be
modified.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1250245313-6995-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Conflicts:
kernel/perf_counter.c
Merge reason: update to latest upstream (-rc6) and resolve
the conflict with urgent fixes.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Just to make it clear that these are _not_ generic event
structures but do rely on the counter configuration.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey J Ashford <cjashfor@us.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
LKML-Reference: <20090813103655.334194326@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
We were using 'fd' locally, but there was a global 'fd' too, so
when converting from open to fopen the test made against fd
should be made against 'fp', but since we have that global
it didnt get discovered ...
Reported-by: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20090814182632.GF3490@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
We're interested in just those symbols/DSOs, so filter out the
unresolved ones.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20090812211957.GE3495@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
While we can enable the perf sample records per tracepoint
counter, we may also want to enable this option for every
tracepoint counters to open, so that we don't need to add a
:record flag for all of them.
Add the -R, --raw-samples options for this purpose.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1250152039-7284-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Add a new flag field while opening a tracepoint perf counter:
-e tracepoint_subsystem:tracepoint_name:flags
This is intended to be generic although for now it only supports the
r[e[c[o[r[d]]]]] flag:
./perf record -e workqueue:workqueue_insertion:record
./perf record -e workqueue:workqueue_insertion:r
will have the same effect: enabling the raw samples record for
the given tracepoint counter.
In the future, we may want to support further flags, separated
by commas.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1250152039-7284-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
When /sys/kernel/debug is mounted the list can be imense, so
use the pager like the other tools.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20090812174459.GB3495@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
perf top supports a -C for setting the profile CPU, but perf
record does not. This adds the same option for perf record,
allowing the user to specify a specific target profile CPU.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090812091801.GC12579@kernel.dk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
It is better than showing the map addr, this way at least we
know that we can't get the symtabs because the DSO was deleted
(system update) while an app still used such DSO.
Yeah, don't do that, but if you do, you'll figure it out
quicker this way.
[acme@doppio linux-2.6-tip]$ perf report | head -15
# Samples: 3796
#
# Overhead Command Shared Object Symbol
# ........ ....... ................................................................... ......
#
23.55% pidgin /lib64/libglib-2.0.so.0.2000.4.#prelink#.Pd98lu (deleted) [.] 0x00000000038844
21.55% pidgin /lib64/libpthread-2.10.1.so.#prelink#.AFwK8Q (deleted) [.] 0x0000000000a42d
10.85% pidgin [kernel] [.] vread_hpet
7.85% pidgin /lib64/libgobject-2.0.so.0.2000.4.#prelink#.o1vpU7 (deleted) [.] 0x00000000014de8
3.35% pidgin /lib64/libc-2.10.1.so (deleted) [.] 0x0000000007a875
3.19% pidgin /lib64/libdbus-1.so.3.4.0.#prelink#.6mwgZP (deleted) [.] 0x0000000001d254
3.06% pidgin /usr/lib64/libgtk-x11-2.0.so.0.1600.5.#prelink#.511hAl (deleted) [.] 0x000000002334e7
2.90% pidgin /usr/lib64/libgdk-x11-2.0.so.0.1600.5.#prelink#.5qlMo1 (deleted) [.] 0x00000000037b2d
1.84% pidgin [kernel] [k] do_sys_poll
1.45% pidgin /usr/lib64/libX11.so.6.2.0.#prelink#.iR59Rx (deleted) [.] 0x0000000004c751
[acme@doppio linux-2.6-tip]$
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Luis Claudio R. Gonçalves <lclaudio@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090811200436.GA3478@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
available
In old binutils we can't access bfd_demangle(), use
cplus_demangle() just like oprofile.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Luis Claudio R. Gonçalves <lclaudio@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090811192211.GG18061@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This made it easier to find the firefox threading related
bug.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090811192138.GE18061@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Noticed when trying to record events for a firefox thread. We
were synthesizing both .tid and .pid with the pid passed via
--pid.
Fix it by reading /proc/PID/status and getting the tgid
to use in .pid, .tid gets the specified "pid".
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <20090811192200.GF18061@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Factorize the dso mapping helpers into a single purpose common file
"util/map.c"
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Brice Goglin <Brice.Goglin@inria.fr>
|
|
Factorize the multiple definition of the events structures into a
single util/event.h file.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Brice Goglin <Brice.Goglin@inria.fr>
|
|
Factorize multiple definitions of high level dso helpers into the
symbol source file.
The side effect is a general export of the verbose and eprintf
debugging helpers into a new file dedicated to debugging purposes.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Brice Goglin <Brice.Goglin@inria.fr>
|
|
If --pretty=raw is given to perf report -T, it now displays one
line per-thread per-counter with the raw event id added.
We get:
# PID TID Name Raw Count
18608 18609 cache-misses 28e 416744
18608 18609 cache-references 28f 6456792
18608 18608 cache-misses 28e 448219
18608 18608 cache-references 28f 7270244
instead of:
# PID TID cache-misses cache-references
18608 18609 416744 6456792
18608 18608 448219 7270244
Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr>
Acked-by: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4A802008.5050409@inria.fr>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Sometimes we get callchain branches that have a rate under the
limit given by the user.
Say you launched:
perf record -f -g -a ./hackbench 10
perf report -g fractal,10.0
And you got:
2.33% hackbench [kernel] [k] _spin_lock_irqsave
|
|--78.57%-- remove_wait_queue
| poll_freewait
| do_sys_poll
| sys_poll
| sysenter_dispatch
| 0xf7ffa430
| 0x1ffadea3c
|
|--7.14%-- __up_read
| up_read
| do_page_fault
| page_fault
| 0xf7ffa430
| 0xa0df710000000a
...
It is abnormal to get a 7.14% branch whereas we passed a 10%
filter.
The problem is that we round down the minimum threshold. This
happens mostly when we have very low number of events. If the
total amount of your branch is 4 and you have a subranch of 3
events, filtering to 90% will be computed like follows:
limit = 4 * 0.9;
The result is about 3.6, but the cast to integer will round
down to 3. It means that our filter is actually of 75%
We must then explicitly round up the minimum threshold.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: acme@redhat.com
Cc: peterz@infradead.org
Cc: efault@gmx.de
LKML-Reference: <20090809024235.GA10146@nowhere>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Improve and fix the handling of per-thread counter stats
recorded via perf record -s. Previously we only displayed
it in debug printouts (-D) and even that output was hard
to disambiguate.
I moved everything to utils/values.[ch] so that we may reuse
it in perf stat.
We get something like this now:
# PID TID cache-misses cache-references
4658 4659 495581 3238779
4658 4662 498246 3236823
4658 4663 499531 3243162
Then it'll be easy to add --pretty=raw to display a single line per thread/event.
By the way, -S was also used for --symbol... So I used -T/--thread here.
perf report: Add -T/--threads to display per-thread counter values
We get something like this now:
# PID TID cache-misses cache-references
4658 4659 495581 3238779
4658 4662 498246 3236823
4658 4663 499531 3243162
Per-thread arrays of counter values are managed in utils/values.[ch]
Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Due to a libz dependency in some distro's binutils package,
C++ demangle support isn't compiled in despite the necessary
libraries being available.
Fix this by adding a -lz link test to the dependency detection
rules.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1249733655.6929.5.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
A few examples of how 'perf' can be used, from an e-mail by
Ingo Molnar http://lkml.org/lkml/2009/8/4/346.
Signed-off-by: Carlos R. Mafra <crmafra2@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Valdis.Kletnieks@vt.edu
LKML-Reference: <20090805185334.GA4535@Pilar.aei.mpg.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
amount of ignored chains in fractal mode
When we filter the callchains below a given percentage, we
ignore them and the end result only shows entries that have an
upper percentage than the filter threshold.
It seems to users then that we have an imbalance in the
percentage, as if the sum inside a profiled branch doesn't
reach 100%.
Since in the past there have been real perf report bugs that
showed the same sypmtom, it would be nice to assure the user
that the data is perfect and trustable and it all sums up to
100.00%.
So fix this by displaying the remaining hits that have been
filtered but without more detail than their amount in each
branches. Example while filtering below 50%:
7.73% [k] delay_tsc
|
|--98.22%-- __const_udelay
| |
| |--86.37%-- ath5k_hw_register_timeout
| | ath5k_hw_noise_floor_calibration
| | ath5k_hw_reset
| | ath5k_reset
| | ath5k_config
| | ieee80211_hw_config
| | |
| | |--88.53%-- ieee80211_scan_work
| | | worker_thread
| | | kthread
| | | child_rip
| | --11.47%-- [...]
| --13.63%-- [...]
--1.78%-- [...]
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1249690585-9145-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
If we recorded with -g option to record the callchain, right now
we require a -g option to perf report as well - and people reported
this as unnecessary complication: the user already specified -g
once, no need to require it a second time.
So if the recording includes call-chains, display the callchain by
default from perf report.
( The user can override this default using "-g none" option from
perf report. )
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1249690585-9145-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
callchains
When the callchain tree comes to insert an empty backtrace, it
raises a spurious warning about the fact we are inserting an
empty. This is spurious because the radix tree assumes it did
something wrong to reach this state. But it didn't, we just met
an empty callchain that has to be ignored.
This happens occasionally with certain types of call-chain
recordings. If it happens it's a big nuisance as perf report
output starts with thousands of warning lines.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1249690585-9145-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
1. Ignore the -A argument if there is no perf.data file
2. Treat an empty file like a non existent file.
Else, perf will try to read the perf.data header, and fail with
an error.
Treating an empty file like a non-existent file makes sense,
since an interupted (as in SIGKILLed) perf could leave such
files around, and you don't want to annoy the user with errors
for files with no data in it.
Signed-off-by: Pierre Habouzit <pierre.habouzit@intersec.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
While toying with perf, I've noticed that perf record can
easily enter a busy loop when doing something as silly as:
$ perf record -A ls
Yeah, do_read here really wants to read a known size, not being
able to should die(), not busy-loop ;)
That was the cause for the bug.
Signed-off-by: Pierre Habouzit <pierre.habouzit@intersec.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Stop perf list from displaying tracepoints without an id file,
those are special tracepoints that are not interfaced to
perfcounters so listing them is erroneous and passing them as
events will produce no output.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
We want to use a coherent flag for -S/--stat across all tools,
so free up -S in perf stat.
Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
origin (DSO, build-id, kernel, etc)
Used with perf report --verbose:
[acme@doppio linux-2.6-tip]$ perf report -v | head -16
5.17% firefox /usr/lib64/xulrunner-1.9.1/libxul.so 0x00000000005d8eee f [.] imgContainer::DrawFrameTo(gfxIImageFrame*, gfxIImageFrame*, nsRect&)
2.56% firefox /lib64/libpthread-2.10.1.so 0x0000000000008e02 d [.] __pthread_mutex_lock_internal
1.94% firefox /usr/lib64/xulrunner-1.9.1/libxul.so 0x0000000000d0af8f f [.] SearchTable
1.75% firefox [kernel] 0xffffffffff60013b k [.] vread_hpet
1.63% firefox /lib64/libpthread-2.10.1.so 0x000000000000a404 d [.] __pthread_mutex_unlock
1.47% firefox /usr/lib64/xulrunner-1.9.1/libmozjs.so 0x00000000000482ea f [.] js_Interpret
1.42% firefox /usr/lib64/xulrunner-1.9.1/libmozjs.so 0x000000000003eda3 f [.] JS_CallTracer
1.24% firefox [kernel] 0xffffffff8102ca4a k [k] read_hpet
1.16% firefox [kernel] 0xffffffff810f3dd4 k [k] fget_light
1.11% firefox /usr/lib64/xulrunner-1.9.1/libmozjs.so 0x00000000000567ff f [.] js_TraceObject
0.98% firefox /usr/lib64/firefox-3.5.2/firefox 0x000000000000dd23 b [.] arena_ralloc
[acme@doppio linux-2.6-tip]$
The new field is just after the symbol address. To help in
figuring out symbol resolution bugs.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Brice Goglin reported:
> I can easily sort them by thread id, but I don't know how to match
> my 4 events with each group of 4 lines.
Also report the counter id and the time running/enabled
stats (in case the counter got time-shared).
Reported-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
perf.data file header
Brice Goglin reported that only the first result from a
multi-counter perf record --stat run is accurate, the
rest looks bogus.
A silly mistake made us re-read the first attribute for
every recorded attribute.
Reported-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Cc: paulus@samba.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The callchain fractal mode builds each new total hits in a new
branch of profiling by using the parent's hits of the current
branch plus the hits of the children.
This is wrong, the total hits of a branch should be made of the
sum of every children hits, we must ignore the parent hits in
this scope.
This patch also fixes another mistake with the hit counting.
Now the rates are correct.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
perf_counter tools: update perf top manual page to reflect
current implementation.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Pressing any key which is not currently mapped to
functionality, based on startup command line options, displays
currently mapped keys, and prompts for input.
Pressing any unmapped key at the prompt returns the user to
display mode with variables unchanged. eg, pressing ? <SPACE>
<ESC> etc displays currently available keys, the value of the
variable associated with that key, and prompts.
Pressing same again aborts input.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
individual counter display
Add [w]eighted hotkey. Pressing [w] toggles between displaying
weighted total of all counters, and the counter selected via
[E]vent select key.
------------------------------------------------------------------------------
PerfTop: 90395 irqs/sec kernel:16.1% [cache-misses/cache-references/instructions], (all, 4 CPUs)
------------------------------------------------------------------------------
weight samples pcnt RIP kernel function
______ _______ _____ ________________ _______________
1275408.6 10881 - 5.3% - ffffffff81146f70 : copy_page_c
553683.4 43569 - 21.3% - ffffffff81146f20 : clear_page_c
74075.0 6768 - 3.3% - ffffffff81147190 : copy_user_generic_string
40602.9 7538 - 3.7% - ffffffff81284ba2 : _spin_lock
26882.1 965 - 0.5% - ffffffff8109d280 : file_ra_state_init
[w]
------------------------------------------------------------------------------
PerfTop: 91221 irqs/sec kernel:14.5% [10000Hz cache-misses], (all, 4 CPUs)
------------------------------------------------------------------------------
weight samples pcnt RIP kernel function
______ _______ _____ ________________ _______________
47320.00 - 22.3% - ffffffff81146f20 : clear_page_c
14261.00 - 6.7% - ffffffff810992f5 : __rmqueue
11046.00 - 5.2% - ffffffff81146f70 : copy_page_c
7842.00 - 3.7% - ffffffff81284ba2 : _spin_lock
7234.00 - 3.4% - ffffffff810aa1d6 : unmap_vmas
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This patch implements the kernel side support for ftrace event
record sampling.
A new counter sampling attribute is added:
PERF_SAMPLE_TP_RECORD
which requests ftrace events record sampling. In this case
if a PERF_TYPE_TRACEPOINT counter is active and a tracepoint
fires, we emit the tracepoint binary record to the
perfcounter event buffer, as a sample.
Result, after setting PERF_SAMPLE_TP_RECORD attribute from perf
record:
perf record -f -F 1 -a -e workqueue:workqueue_execution
perf report -D
0x21e18 [0x48]: event: 9
.
. ... raw event: size 72 bytes
. 0000: 09 00 00 00 01 00 48 00 d0 c7 00 81 ff ff ff ff ......H........
. 0010: 0a 00 00 00 0a 00 00 00 21 00 00 00 00 00 00 00 ........!......
. 0020: 2b 00 01 02 0a 00 00 00 0a 00 00 00 65 76 65 6e +...........eve
. 0030: 74 73 2f 31 00 00 00 00 00 00 00 00 0a 00 00 00 ts/1...........
. 0040: e0 b1 31 81 ff ff ff ff .......
.
0x21e18 [0x48]: PERF_EVENT_SAMPLE (IP, 1): 10: 0xffffffff8100c7d0 period: 33
The raw ftrace binary record starts at offset 0020.
Translation:
struct trace_entry {
type = 0x2b = 43;
flags = 1;
preempt_count = 2;
pid = 0xa = 10;
tgid = 0xa = 10;
}
thread_comm = "events/1"
thread_pid = 0xa = 10;
func = 0xffffffff8131b1e0 = flush_to_ldisc()
What will come next?
- Userspace support ('perf trace'), 'flight data recorder' mode
for perf trace, etc.
- The unconditional copy from the profiling callback brings
some costs however if someone wants no such sampling to
occur, and needs to be fixed in the future. For that we need
to have an instant access to the perf counter attribute.
This is a matter of a flag to add in the struct ftrace_event.
- Take care of the events recursivity! Don't ever try to record
a lock event for example, it seems some locking is used in
the profiling fast path and lead to a tracing recursivity.
That will be fixed using raw spinlock or recursivity
protection.
- [...]
- Profit! :-)
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Adds autodetection for libelf as well, and simplifies the
libbfd code. Furthermore, fail make with an error when libelf
is not found and warn about the lack of libbfd.
Also provide an option to build a 32bit version even though you
might be running a 64bit kernel.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
In some cases distros have binaries and debuginfo in weird places:
[root@doppio tuna]# ls -la /usr/lib64/{xulrunner-1.9.1/xulrunner-stub,firefox-3.5.2/firefox}
-rwxr-xr-x 1 root root 90024 2009-08-03 19:45 /usr/lib64/firefox-3.5.2/firefox
-rwxr-xr-x 1 root root 90024 2009-08-03 18:23 /usr/lib64/xulrunner-1.9.1/xulrunner-stub
[root@doppio tuna]# sha1sum /usr/lib64/{xulrunner-1.9.1/xulrunner-stub,firefox-3.5.2/firefox}
19a858077d263d5de22c9c5da250d3e4396ae739 /usr/lib64/xulrunner-1.9.1/xulrunner-stub
19a858077d263d5de22c9c5da250d3e4396ae739 /usr/lib64/firefox-3.5.2/firefox
[root@doppio tuna]# rpm -qf /usr/lib64/{xulrunner-1.9.1/xulrunner-stub,firefox-3.5.2/firefox}
xulrunner-1.9.1.2-1.fc11.x86_64
firefox-3.5.2-2.fc11.x86_64
[root@doppio tuna]# ls -la /usr/lib/debug/{usr/lib64/xulrunner-1.9.1/xulrunner-stub,usr/lib64/firefox-3.5.2/firefox}.debug
ls: cannot access /usr/lib/debug/usr/lib64/firefox-3.5.2/firefox.debug: No such file or directory
-rwxr-xr-x 1 root root 403608 2009-08-03 18:22 /usr/lib/debug/usr/lib64/xulrunner-1.9.1/xulrunner-stub.debug
Seemingly we don't have a .symtab when we actually can find it
if we use the .note.gnu.build-id ELF section put in place by
some distros. Use it and find the symbols we need.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20090805130453.GC10688@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Since the C++ demangling isn't needed for everybody and
bfd/iberty aren't widely/easily available on all machines, make
it optional.
It also allows you to forcefully disable demangling by using
NO_DEMANGLE=1 and otherwise tries to detect libbfd/libiberty
combinations that result in a compiling demangler.
Reported-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
LKML-Reference: <20090801082048.GX12579@kernel.dk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
If you're doing performance testing, you're interested in the
symbols anyway so lets make "--sort comm,dso,symbol" the
default sort option.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: acme@redhat.com
LKML-Reference: <1249467921-10450-1-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
