| Age | Commit message (Collapse) | Author |
|---|
|
The change to let individual tests decide to reboot the machine on
success of the entire test also prevented errors from rebooting
when an error was detected.
The "no_reboot" variable was only cleared if the test had
reboot_on_success set. But the no_reboot variable also prevents the test
rebooting when an error was detected even when REBOOT_ON_ERROR was set.
Add a new "reboot_success" variable that is used to determine if the
test should reboot on success and not touch the no_reboot variable.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
When BISECT_REVERSE and BISECT_SKIP are used together with boot or test
testing, build failures are treated as boot or test failures and
'git bisect bad' is executed instead of 'git bisect skip'. This is because
the $ret value of -1 is treated as a build failure, but the $reverse_bisect
logic does not properly handle this.
Simple fix, only invert it if it is positive.
Link: http://lkml.kernel.org/r/1335235380-8509-1-git-send-email-Russ.Dill@ti.com
Signed-off-by: Russ Dill <Russ.Dill@ti.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
hugepage-mmap.c, hugepage-shm.c and map_hugetlb.c in Documentation/vm are
simple pass/fail tests, It's better to promote them to
tools/testing/selftests.
Thanks suggestion of Andrew Morton about this. They all need firstly
setting up proper nr_hugepages and hugepage-mmap need to mount hugetlbfs.
So I add a shell script run_vmtests to do such work which will call the
three test programs and check the return value of them.
Changes to original code including below:
a. add run_vmtests script
b. return error when read_bytes mismatch with writed bytes.
c. coding style fixes: do not use assignment in if condition
[akpm@linux-foundation.org: build the targets before trying to execute them]
[akpm@linux-foundation.org: Documentation/vm/ no longer has a Makefile. Fixes "make clean"]
Signed-off-by: Dave Young <dyoung@redhat.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
So a "make run_tests" will build the tests before trying to run them.
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Remove the run_tests script and launch the selftests by calling "make
run_tests" from the selftests top directory instead. This delegates to
the Makefile in each selftest directory, where it is decided how to launch
the local test.
This removes the need to add each selftest directory to the now removed
"run_tests" top script.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest changes from Steven Rostedt.
* tag 'ktest-v3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Allow a test to override REBOOT_ON_SUCCESS
ktest: Fix SWITCH_TO_GOOD to also reboot the machine
ktest: Add SCP_TO_TARGET_INSTALL option
ktest: Add warning when bugs are ignored
ktest: Add INSTALL_MOD_STRIP=1 when installing modules
|
|
The option REBOOT_ON_SUCCESS is global, and will have the machine reboot
the the box if all tests are successful. But a test may not want the
machine to reboot, and perhaps have the kernel it loaded be used to
install the next kernel. Or the last test may set up a kernel that the
user may want to look at. In this case, the user could have the global
option REBOOT_ON_SUCCESS be true, but if a test is defined to run at the
end, that test can override the global option and keep the kernel it
installed for the user to log in with.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
When the option SWITCH_TO_GOOD is set, it will be called when the system
needs to reboot to the good server. But currently, this keeps the reboot
from happening. The SWITCH_TO_GOOD is just a way to get to a new kernel,
it may not mean to not reboot.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Currently the option used to scp both the modules to the target as well
as the kernel image are the same (SCP_TO_TARGET). But some embedded
boards may require them to be different. The modules may need to be put
directly on the board, but the kernel image may need to go to a
tftpserver.
Add the option SCP_TO_TARGET_INSTALL that will allow the user to change
the config so that they may have the modules and image got to different
machines.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
When IGNORE_ERRORS is set, ktest will not fail a test if a backtrace
is detected. But this can be an issue if the user added it in the
config but forgot to remove it. They may be left wondering why their
test did not fail, or even worse, why their bisect gave the wrong
commit.
Add a warning in the output if IGNORE_WARNINGS is set, and ktest detects
a kernel error.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
To keep the modules from bloating the target's filesystem
strip them during the install.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree from Jiri Kosina:
"It's indeed trivial -- mostly documentation updates and a bunch of
typo fixes from Masanari.
There are also several linux/version.h include removals from Jesper."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (101 commits)
kcore: fix spelling in read_kcore() comment
constify struct pci_dev * in obvious cases
Revert "char: Fix typo in viotape.c"
init: fix wording error in mm_init comment
usb: gadget: Kconfig: fix typo for 'different'
Revert "power, max8998: Include linux/module.h just once in drivers/power/max8998_charger.c"
writeback: fix fn name in writeback_inodes_sb_nr_if_idle() comment header
writeback: fix typo in the writeback_control comment
Documentation: Fix multiple typo in Documentation
tpm_tis: fix tis_lock with respect to RCU
Revert "media: Fix typo in mixer_drv.c and hdmi_drv.c"
Doc: Update numastat.txt
qla4xxx: Add missing spaces to error messages
compiler.h: Fix typo
security: struct security_operations kerneldoc fix
Documentation: broken URL in libata.tmpl
Documentation: broken URL in filesystems.tmpl
mtd: simplify return logic in do_map_probe()
mm: fix comment typo of truncate_inode_pages_range
power: bq27x00: Fix typos in comment
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
While demoing ktest at ELC in 2012, it was embarrassing that the
make_min_config test failed to work because the snowball board I was
testing it against had a config that would not build. But the
make_min_config only tested the testing part and ignored build failures.
The end result was a config file that would not boot.
This time, for real.
* tag 'ktest-fix-make-min-failed-build-for-real' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Fix make_min_config test when build fails
|
|
The make_min_config does not take into account when the build fails,
resulting in a invalid MIN_CONFIG .config file. When the build fails,
it is ignored and the boot test is executed, using the previous built
kernel. The configs that should be tested are not tested and they may
be added or removed depending on the result of the last kernel that
succeeded to be built.
If the build fails, mark the current config as a failure and the
configs that were disabled may still be needed.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Correct spelling "faied" to "failed" in
tools/testing/ktest/ktest.pl
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Add INGORE_ERRORS to ignore warnings in boot up
ktest: Still do reboot even for REBOOT_TYPE = script
ktest: Fix compare script to test if options are not documented
ktest: Detect typos in option names
ktest: Have all values be set by defaults
ktest: Change initialization of defaults hash to perl format
ktest: Add options SWITCH_TO_GOOD and SWITCH_TO_TEST
ktest: Allow overriding bisect test results
ktest: Evaluate options before processing them
ktest: Evaluate $KERNEL_VERSION in both install and post install
ktest: Only ask options needed for install
ktest: When creating a new config, ask for BUILD_OPTIONS
ktest: Do not ask for some options if the only test is build
ktest: Ask for type of test when creating a new config
ktest: Allow bisect test to restart where it left off
ktest: When creating new config, allow the use of ${THIS_DIR}
ktest: Add default for ssh-user, build-target and target-image
ktest: Allow success logs to be stored
ktest: Save test output
|
|
Bring a first selftest in the relevant directory. This tests several
combinations of breakpoints and watchpoints in x86, as well as icebp traps
and int3 traps. Given the amount of breakpoint regressions we raised
after we merged the generic breakpoint infrastructure, such selftest
became necessary and can still serve today as a basis for new patches that
touch the do_debug() path.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Bring a new kernel selftests directory in tools/testing/selftests. To
add a new selftest, create a subdirectory with the sources and a
makefile that creates a target named "run_test" then add the
subdirectory name to the TARGET var in tools/testing/selftests/Makefile
and tools/testing/selftests/run_tests script.
This can help centralizing and maintaining any useful selftest that
developers usually tend to let rust in peace on some random server.
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (53 commits)
Kconfig: acpi: Fix typo in comment.
misc latin1 to utf8 conversions
devres: Fix a typo in devm_kfree comment
btrfs: free-space-cache.c: remove extra semicolon.
fat: Spelling s/obsolate/obsolete/g
SCSI, pmcraid: Fix spelling error in a pmcraid_err() call
tools/power turbostat: update fields in manpage
mac80211: drop spelling fix
types.h: fix comment spelling for 'architectures'
typo fixes: aera -> area, exntension -> extension
devices.txt: Fix typo of 'VMware'.
sis900: Fix enum typo 'sis900_rx_bufer_status'
decompress_bunzip2: remove invalid vi modeline
treewide: Fix comment and string typo 'bufer'
hyper-v: Update MAINTAINERS
treewide: Fix typos in various parts of the kernel, and fix some comments.
clockevents: drop unknown Kconfig symbol GENERIC_CLOCKEVENTS_MIGR
gpio: Kconfig: drop unknown symbol 'CS5535_GPIO'
leds: Kconfig: Fix typo 'D2NET_V2'
sound: Kconfig: drop unknown symbol ARCH_CLPS7500
...
Fix up trivial conflicts in arch/powerpc/platforms/40x/Kconfig (some new
kconfig additions, close to removed commented-out old ones)
|
|
When testing a kernel that has warnings, ktest.pl will fail the test
when it sees the warning. If you need to test the the kernel and want
to ignore the errors that are produced, the option IGNORE_ERRORS has
been added. When IGNORE_ERRORS is set to something other than 0, it will
ignore call traces due to WARN_ON().
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The REBOOT_TYPE may be either grub or script, if it is script
it is expected that a REBOOT_SCRIPT is defined.
With the SWITCH_TO_TEST which is the complement of SWITCH_TO_GOOD,
which does basically the same thing as REBOOT_SCRIPT and but for
both grub and script, the REBOOT_SCRIPT does not need to be mandatory
anymore.
Do not require the REBOOT_SCRIPT and always run the reboot code
for both grub and script.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The compare script compare-ktest-sample.pl checks for options
that are defined in ktest.pl and not documented in samples.conf,
as well as samples in samples.conf that are not used in ktest.pl.
With the switch to the hash format to initialize the ktest variables
the compare script needs to be updated to handle the change.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
It becomes quite annoying when you go to run a test and then
realize that you typed an option name wrong, and the test starts
doing the default action and not what you expected it to do.
It is even more annoying when you wake up the next day after
running the test over night when you discover this.
By testing if all options specified in a config file are
used by either ktest or were used in one of the option's values
we can see if there are any dangling options that were not used.
In such a case, show the user the options that were not used
and ask them if they want to continue or not.
The option IGNORE_UNUSED was also added to allow the user to
override this feature.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Currently the patchcheck, bisect, and config_bisect variables
are only able to be set per test. You can not set a default
value for them.
By letting default values be set, it makes some config files
a bit easier, and also makes it easier to find typos in the
option names.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Initializing each default value by specifying the hash name is
ugly. This is one of the rare cases that the "perl way" is actually
much cleaner and easier to read.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
For machines that do no use grub, it may be needed to update an
external image (tftp) before doing a reboot into either the
test image or the known good image.
The option SWITCH_TO_GOOD is added, where if it is defined, the
command that is specified as its value will be executed before
doing a reboot into a known good image.
The option SWITCH_TO_TEST is added, where if it is defined, the
command that is specified as its value will be executed before
doing a reboot into the test image.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
When running the ktest git bisect test, if the BISECT_TYPE is "test",
the bisect is determined to be good or bad based off of the error
code of the test that is run. Currently, if the test returns 0,
it is considered a pass (good), a non-zero is considered a fail (bad).
But it has been requested to add more options, and also change
the meanings of the error codes of the test. For example, one may
want the test to detect if the commit is not good or bad,
(maybe the bisect came to a point where the code in question
does not exist). The test could report an error code that should tell
ktest to skip the commit.
Also, a test could detect that something is horribly wrong and the
biscet should just be aborted.
The new options:
BISECT_RET_GOOD
BISECT_RET_BAD
BISECT_RET_SKIP
BISECT_RET_ABORT
BISECT_RET_DEFAULT
have been added. The first 4 take an integer value that will
represent if the test should be considered a pass, fail, neither
good nor bad, or abort respectively.
The BISECT_RET_DEFAULT will bo whatever is not defined by the
above codes. If only BISECT_RET_DEFAULT is defined, then all tests
will do the default.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
All options can take variables "${var}". Before doing any processing
or decision making on the content of an option, evaluate it incase
there are variables that may change the outcome.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The install process may also need to know what the kernel version
is, to add it to the name. Evaluate it for both install and
post install.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
If all the tests are only for build or install, do not ask
for options not needed to do the install, if the options do
not exist.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
When creating a new config, ask for the BUILD_OPTIONS variable
that lets users add things like -j20 to the make.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
When creating a ktest config or if te config only has build only
tests, some of the manditory config options are not needed.
Do not ask for them if all tests in the config file are just build
tests.
Suggested-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
When no argument is supplied to ktest, or the config applied does
not exist and a new config is being created, instead of just using
the default test type, give the user an option to pick the test type
of either 'build, install, or boot'. Other options may be added later
but then those would require more questions as they require more
fields. But that's for another release of ktest to add that feature.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
If a bisect is killed for some reason, have ktest detect that a bisect
is in progress and if so, allow the user to start the bisect where
it left off.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Typing in a full path when you know that the path exists within
the directory your are running is tedious and unnecessary.
Allow the user to use ${PWD} if they want a dynamic path name
which will be the path that ktest.pl is executed from
or use ${THIS_DIR} which is a variable assigned `pwd` and
the the variable will exist within the config, allowing the user
to change it and affect all other paths using this variable as well
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
When a user runs ktest without an argument, or the argument given
is not a config file that exists, ktest will ask the user a few
questions to create a simple ktest config file.
A few of the questions should have a default value set, that if anything
it will make it easier for the user to know what is suppose to
be in that value.
These new values are:
SSH_USER, BUILD_TARGET and TARGET_IMAGE
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Add a STORE_SUCCESSES option, to allow success logs to be stored, for
example to double-check or otherwise post-process the test logs.
Link: http://lkml.kernel.org/r/1321616131-21352-3-git-send-email-rabin@rab.in
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The test output may contain useful information; save it along with the
already-saved buildlog, dmesg, and .config.
Link: http://lkml.kernel.org/r/1321616131-21352-1-git-send-email-rabin@rab.in
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Let's say we have "OUTPUT_DIR = build/${TEST_NAME}", and we're iterating
a test. In the second iteration of a test, the TEST_NAME of the test
we're repeating is not used. Instead, ${TEST_NAME} appears literally:
touch /home/rabin/kernel/test/build/${TEST_NAME}/.config ... SUCCESS
Fix this by making __eval_option() check the parent test options
for a repeated test.
Link: http://lkml.kernel.org/r/1321616131-21352-2-git-send-email-rabin@rab.in
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
When ktest.pl is called without any arguments, or if the config
file does not exist, ktest.pl will ask the user for some information.
Some of these questions are code paths. Allowing the user to type
${PWD} for the current directory greatly simplifies these entries.
Add variable processing to the entered values.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Adding the variable ${PWD} that equals `pwd` makes the config files
much simpler.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
On some tests that do multiple boots (patchcheck, bisect, etc), the build
of the next kernel to run may finish before the stable kernel has finished
booting. Then the install of the new kernel will fail when it tries to connect
as the machine has not finished the boot process.
Do one more monitor flush to make sure the machine is up and running before
trying to connect to it again.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
When setting the next kernel to boot to with grub, do not opencode
the reboot operation. The normal reboot operation can be modified by
config options (namely POWERCYCLE_AFTER_REBOOT). This needs to affect
all reboots. Remove the opencoded reboot to make sure that any changes
to the reboot code also affect all reboots.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The IF statements for DEFAULTS and TEST_START sections now handle
complex statements (&&,||)
Example:
TEST_START IF (DEFINED ALL_TESTS || ${MYTEST} == boottest) && ${MACHINE} == gandalf
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The order for some of the keywords on a section line
(TEST_START or DEFAULTS) does not really matter. Simply need
to remove the keyword from the line as we process it and
evaluate the next keyword in the line. By removing the keywords
as we find them, we do not need to keep track of where on the
line they were found.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The make_min_config test will turn off one config at a time and check
if the config boots or not, and if it does, it will remove that config
plus any config that depended on that config.
ktest already looks if a config has a dependency and will try the
dependency config first. But by sorting the configs and trying the
config with the most configs dependent on it, we can shrink the
minconfig faster.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Have IF statements process if a config variable or option has been
defined or not. Can use NOT DEFINED in the case for telling if
a variable or option has not been defined.
DEFAULTS IF NOT DEFINED SSH_USER
SSH_USER = root
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The OVERRIDE keyword will allow options defined in the given
DEFAULTS section to override options defined in previous DEFAULT
sections.
Normally, options will error if they were previous defined.
The OVERRIDE keyword allows options that have been previously
defined to be changed in the given section.
Note, the same option can not be defined in the same DEFAULT section
even if that section is marked as OVERRIDE.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The code that handles parsing the TEST_TYPE and DEFAULT code share
a lot of common functionality. Combine the two and add a if statement
that does what is different between them.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
