aboutsummaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2012-06-25ALSA: hda - Add Realtek ALC280 codec supportDavid Henningsson
This chip looks very similar to ALC269 and ALC27* variants. The bug reporter has verified that sound was working after this patch had been applied. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/1017017 Tested-by: Richard Crossley <richardcrossley@o2.co.uk> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25ALSA: hda - Remove obsoleted CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKSTakashi Iwai
I simply forgot to remove this entry although all Realtek quirks have been dropped. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25ASoC: wm8994: remove duplicate codeJaroslav Kysela
It seems that the code duplication was added at a merge operation. Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25ALSA: usb-audio: add BOSS GT-100 supportClemens Ladisch
Reported-by: John McFarland <mcfarljm@gmail.com> Tested-by: John McFarland <mcfarljm@gmail.com> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25ALSA: hda - Remove suprefluous EAPD init verbs for ALC660vdTakashi Iwai
The EAPD on nodes 0x14 and 0x15 are initialized in alc_auto_setup_eapd(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25ASoC: dwc: Bodge around continuing absence of clock API stubsMark Brown
The patches for stubbing out the generic clock API still haven't been applied so we need to either add ifdefs here or add a dependency until someone decides to actually apply them. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-25ASoC: wm8996: Move register default configuration to I2C probeMark Brown
This gets the registers set up as early as possible, mainly useful for the GPIOs to ensure that they're in the correct mode. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-25ASoC: wm8996: Inline wm8996_reset() and optimise cache-only usageMark Brown
There is only one caller and this allows us to cleanly leave the CODEC with the internal LDO powered down which is the default state we're looking for and means that we can robustly disable the register cache only when we either disable the LDO or power down the external regulators. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-25ASoC: wm8996: Move regulator notifier callbacks into I2C levelMark Brown
Now that we're using regmap the cache is available here. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-25ASoC: wm8904: Move register default setup into I2C probe()Mark Brown
Get it done as early as possible, it's neater and minimises the time the pins aren't configured as requested. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-25ASoC: wm8904: Move regulator acquisition and device identification to I2CMark Brown
It's more idiomatic to have the resource allocation at this level. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-25ASoC: wm8904: Rely entirely on the core for bias level managementMark Brown
Even though the WM8904 is able to use idle_bias_off during both probe and resume we were needlessly leaving the device in standby mode. Instead power the device down as soon as we've confirmed that we can talk to it and don't manage the bias level at all over suspend and resume, the core will take us down to our minimum power level. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-25Merge tag 'v3.5-rc4' into for-3.6Mark Brown
Linux 3.5-rc4 contains some bug fixes which overlap with new features.
2012-06-25ASoC: dmaengine_pcm: fix typo in commentUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-25ALSA: hda - Add inv-dmic model to possible Realtek codecsTakashi Iwai
For convenience, add "inv-dmic" model string for enabling the inverted internal mic workaround to possible Realtek codecs, so far, ALC882-variants, ALC262, ALC268, ALC269-variants, and ALC662-variants. Also, the model strings for hardware inv-dmic workarounds, "alc269-dmic" and "alc271-dmic", are added for ALC269(VA) and ALC271 codecs as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25ALSA: hda - Add inverted mic quirks for Asus U41SV, Acer 1810TZ and AOD260David Henningsson
These machines have inverted phase on right channel for their internal mics. BugLink: https://bugs.launchpad.net/bugs/997227 BugLink: https://bugs.launchpad.net/bugs/996611 BugLink: https://bugs.launchpad.net/bugs/1006089 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25ALSA: hda - Add the inverted digital mic workaround to Realtek codecsTakashi Iwai
Some laptops are equipped with ForteMedia digital mics that give the differential input. With such devices, summing stereo streams into a mono (like PulseAudio does) results in almost silence. This patch provides a workaround for this bug by adding a new mixer switch to turn on/off the right channel of digital mic, just like a similar fix for Conexant codecs. When the new switch "Inverted Internal Mic Capture Switch" is off and the current input source is the digital mic, the right channel of the recording stream is muted. When another input source is selected, the right channel is restored. Tested-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-23ASoC: wm5102: Initial driverMark Brown
The WM5102 is a highly-integrated low-power audio system for smartphones, tablets and other portable audio devices based on the Arizona platform. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-23ASoC: Add shared code for Wolfson Arizona class devicesMark Brown
The Wolfson Arizona series of audio hub CODECs can share a large amount of their driver code as the result of a common register map. This patch adds some of this core support, providing a basis for the initial WM5102 audio driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-23ASoC: io: Don't dereference regmap if we failed to get oneMark Brown
Avoids a crash in invalid configurations. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-06-23ASoC: dapm: Try to add all routes even if one failsMark Brown
We may as well print as many errors as we can in one go rather than requiring developers to iterate through all their typos. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-06-23ASoC: isabelle: Staticise non-exported isabelle_daiMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-23ASoC: da732x: Staticise non-exported symbol soc_codec_dev_da732xMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-23ASoC: SPEAr spdif_in: Add spdif IN supportVipin Kumar
This patch implements the spdif IN driver for ST peripheral Signed-off-by: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-22ASoC: Add support for SPEAr ASoC pcm layer.Rajeev Kumar
This patch add support for the SPEAr ASoC pcm layer in ASoC framework. The pcm layer uses common snd_dmaengine framework. Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-22ASoC: Add support for synopsys i2s controller as per ASoC framework.Rajeev Kumar
This patch add support for synopsys I2S controller as per the ASoC framework. Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-22ALSA: hda - Don't power up when not powered down.Dylan Reid
After cancel_delayed_work_sync returns, the power down work either never started (power_on == 1) or finished (power_on == 0). In the former case there is no need to power up again. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-21ALSA: HDA: Add inverted internal mic quirk for Lenovo S205David Henningsson
The Lenovo Ideapad S205 has an internal mic where the right channel is phase inverted. BugLink: https://bugs.launchpad.net/bugs/884652 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-21ALSA: hda - Fix ALC272X codec detectionTakashi Iwai
The codec ALC272X is a special codec for some Dell machines, and its detection got broken in the recent kernel because SSID check (required by ALC272X check) was moved to the later point. Now we need to move this codec check to the right place, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-21ASoC: bfin: use dev_err to print error log instead of dev_dbgScott Jiang
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-21ALSA: hda - Correct info print in HDMI non-intrinsic unsol eventTakashi Iwai
In the recent code, the value shown there is a tag number, and it's no longer same as the pin nid. Correct the message to avoid confusion. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-21ALSA: hda - Don't rely on event tag for simple_hdmiTakashi Iwai
VIA codecs seem not returning the event tag in the unsolicited events, thus the current code relying on the tag value doesn't work. Since simple_hdmi stuff has only a single pin, we can use simply snd_hda_jack_set_dirty_all() to activate the pin-detection independently from the tag value. Tested-by: Annie Liu <AnnieLiu@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-21ALSA: hda - Remove loop from simple_hdmi*()Takashi Iwai
The simple_hdmi stuff is designed only for a single pin and a single converter (thus a single PCM stream), and no need for loops. Let's flatten the code. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-20ASoC: dmaengine-pcm: Add support for querying stream position from DMA driverLars-Peter Clausen
Currently the sound dmaengine pcm helper functions implement the pcm_pointer callback by trying to count the number of elapsed periods. This is done by advancing the stream position in the dmaengine callback by one period. Unfortunately there is no guarantee that the callback will be called for each elapsed period. It may be possible that under high system load it is only called once for multiple elapsed periods. This patch addresses the issue by implementing support for querying the current stream position directly from the dmaengine driver. Since not all dmaengine drivers support reporting the stream position yet the old period counting implementation is kept for now. Furthermore the new mechanism allows to report the stream position with a sub-period granularity, given that the dmaengine driver supports this. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20ASoC: dmaengine-pcm: Rename and deprecate snd_dmaengine_pcm_pointerLars-Peter Clausen
Currently the sound dmaengine pcm helper functions implement the pcm_pointer callback by trying to count the number of elapsed periods. This is done by advancing the stream position in the dmaengine callback by one period. Unfortunately there is no guarantee that the callback will be called for each elapsed period. It may be possible that under high system load it is only called once for multiple elapsed periods. This patch renames the current implementation and documents its shortcomings and that it should not be used anymore in new drivers. The next patch will introduce a new snd_dmaengine_pcm_pointer which will be implemented based on querying the current stream position from the dma device. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by Vinod Koul <vinod.koul@linux.intel.com> Acked-by: Dong Aisheng <dong.aisheng@linaro.org Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20ALSA: hda - Move one-time init codes from generic_hdmi_init()Takashi Iwai
The codes to initialize work struct or create a proc interface should be called only once and never although it's called many times through the init callback. Move that stuff into patch_generic_hdmi() so that it's called only once. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-20Merge branch 'fix/hda' into topic/hdaTakashi Iwai
The fix for power sequence needs to be merged back to topic branch.
2012-06-20ASoC: add i2s dai driver for bf6xx socScott Jiang
This driver enables i2s mode support on blackfin bf6xx platform. We reuse bf5xx-i2s-pcm.c as its i2s pcm driver because it's the same for both bf5xx and bf6xx soc. Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20ASoC: add sport driver for bf6xx socScott Jiang
The SPORT(Serial Port) module on bf6xx soc has a totally different ip comparing to bf5xx soc. An individual SPORT module consists of two independently configurable SPORT halves with identical functionality. Each SPORT half can be configured for either transmitter or receiver. Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20ALSA: hda - Add missing snd_hda_jack_detect_enable() for simple_hdmi*()Takashi Iwai
Reported-by: Annie Liu <annieliu@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-20ALSA: hda - Fix the pin nid assignment in patch_hdmi.cTakashi Iwai
This fixes the regression introduced by the commit d0b1252d for refactoring simple_hdmi*(). The pin NID wasn't assigned correctly. Reported-by: Annie Liu <annieliu@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-20sound: swarm_cs4297: Provide definitions for AC97 registersEzequiel Garcia
This patch removes the last usage of linux/ac97_codec.h by re-defining used AC97 registers. We can't use sound/ac97_codec.h here, since it is an OSS driver. Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-20ALSA: pcxhr: Add LTC supportMarkus Bollinger
add LTC (linear timecode) read function via proc interface to the pcxhr driver Signed-off-by: Markus Bollinger <bollinger@digigram.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-20ALSA: pcxhr: Fix a counter wrapMarkus Bollinger
fix a counter wrap to avoid resynchronization of stream positions every several minutes. The resynchronization may create stream position jitter Signed-off-by: Markus Bollinger <bollinger@digigram.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-20ALSA: snd_usb_audio: ignore ctrl errors on QuickCam Pro for NotebooksOleksij Rempel
This webcam works mostly ok, exept with skype. Skype sends lots of ctrl messages to dynamically ajust record level. If for some reasons it pokes some error every thing goes broken: - first pulseaudio blocks sound for all apps - then video is reseted - then skype freez dmesg has lots of messages like: cannot set freq 16000 to ep 0x86" Setting ignore_ctl_error=1 fixes this problem. Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-20ALSA: snd_usb_audio: ignore ctrl errors on QuickCam E3500Oleksij Rempel
if this cam is pluged in, pulse audio can't initiate capture device. dmesg has lots of messages like: "cannot set freq 16000 to ep 0x86" Setting ignore_ctl_error=1 fixes this problem. Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-20ASoC: follow the updated samsung DMA common operationsBoojin Kim
This patch uses config() function to configure DMA transmit options. Signed-off-by: Boojin Kim <boojin.kim@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-06-19ASoC: wm5100: Remove stubs of ASoC-level register map codeMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-18[media] S_HW_FREQ_SEEK: set capability flags and return ENODATA instead of ↵Hans Verkuil
EAGAIN Set the new capability flags in G_TUNER and return ENODATA if no channels were found. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18ALSA: maestro3: Remove unused AC97 register definitionsEzequiel Garcia
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-04-24 21:22:22 +0000