aboutsummaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2010-12-15ASoC: Extend DAPM to handle power changes on cross-device pathsJarkko Nikula
Power change event like stream start/stop or kcontrol change in a cross-device path originates from one device but codec bias and widget power changes must be populated to another devices on that path as well. This patch modifies the dapm_power_widgets so that all the widgets on a sound card are checked for a power change, not just those that are specific to originating device. Also bias management is extended to check all the devices. Only exception in bias management are widgetless codecs whose bias state is changed only if power change is originating from that context. DAPM context test is added to dapm_seq_run to take care of if power sequence extends to an another device which requires separate register writes. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-15ASoC: Move widgets from DAPM context to snd_soc_cardJarkko Nikula
Decoupling widgets from DAPM context is required when extending the ASoC core to cross-device paths. Even the list of widgets are now kept in struct snd_soc_card, the widget listing in sysfs and debugs remain sorted per device. This patch makes possible to build cross-device paths but does not extend yet the DAPM to handle codec bias and widget power changes of an another device. Cross-device paths are registered by listing the widgets from device A in a map for device B. In case of conflicting widget names between the devices, a uniform name prefix is needed to separate them. See commit ead9b91 "ASoC: Add optional name_prefix for kcontrol, widget and route names" for help. An example below shows a path that connects MONO out of A into Line In of B: static const struct snd_soc_dapm_route mapA[] = { {"MONO", NULL, "DAC"}, }; static const struct snd_soc_dapm_route mapB[] = { {"Line In", NULL, "MONO"}, }; Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-15ASoC: Move DAPM paths from DAPM context to snd_soc_cardJarkko Nikula
Decoupling DAPM paths from DAPM context is a first prerequisite when extending ASoC core to cross-device paths. This patch is almost a nullop and does not allow to construct cross-device setup but the path clean-up part in dapm_free_widgets is prepared to remove cross-device paths between a device being removed and others. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-14ASoC: soc-cache: A few minor stylistic changesDimitris Papastamos
Remove redundant parentheses/spaces in the use of the sizeof operator. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-14ASoC: Explicitly clear WM8993 ramp controls on power downMark Brown
This helps ensure that the ramp logic is reset when powering back up. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-14ASoC: dapm: Add output driver widgetOlaya, Margarita
In some cases it was not possible to follow the appropiate power ON/OFF sequence like in cases where the PGA needs to be enabled before the driver and disabled before the PGA for pop reduction. Add a widget to support output driver (speaker, haptic, vibra, etc) drivers where power ON/OFF ordering is important. Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-13ASoC: Fix AC'97 registration unwindMark Brown
soc_unregister_ac97_dai_link() takes a CODEC as an argument, not a rtd like the registration function, so give it what it's looking for. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-13ASoC: Fix build error caused by merging a fix for 2.6.37 into 2.6.38Jarkko Nikula
Fix "ASoC: Fix bias power down of non-DAPM codec" for 3.6.37 will cause a build error when merging into ASoC for-2.6.38. Fix the issue by doing a change that commit ce6120c "ASoC: Decouple DAPM from CODECs" would do. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-13Merge branch 'for-2.6.37' into for-2.6.38Mark Brown
2010-12-13ASoC: Fix bias power down of non-DAPM codecJarkko Nikula
Currently bias of non-DAPM codec will be powered down (standby/off) whenever there is a stream stop. This is wrong in simultaneous playback/capture since the bias is put down immediately after stopping the first stream. Fix this by using the codec->active count when figuring out the needed bias level after stream stop. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-13Merge branch 'topic/asoc' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 into for-2.6.38
2010-12-13ASoC: Fix merge errors with flush_scheduled_work() removalTakashi Iwai
delayed_work was moved to dapm in the commit ce6120cca2589ede530200c7cfe11ac9f144333c ASoC: Decouple DAPM from CODECs Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-13ASoC: Fix widgets for WM8994/58 AIF2 source controlMark Brown
The compiler really ought to have been warning about unreferenced variables... Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-13Merge branch 'topic/workq-update' into topic/asocTakashi Iwai
Conflicts: sound/soc/codecs/wm8350.c sound/soc/codecs/wm8753.c sound/soc/sh/fsi.c sound/soc/soc-core.c
2010-12-13sound: don't use flush_scheduled_work()Tejun Heo
flush_scheduled_work() is deprecated and scheduled to be removed. * cancel[_delayed]_work() + flush_scheduled_work() -> cancel[_delayed]_work_sync(). * wm8350, wm8753 and soc-core use custom code to cancel a delayed work, execute it immediately if it was pending and wait for its completion. This is equivalent to flush_delayed_work_sync(). Use it instead. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-11ASoC: Automatically manage WM8903 deemphasis rateMark Brown
Provide the user with a boolean control then automatically select the deemphasis filter most closely matching the sample rate. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-11ASoC: Remove open coded symmetry implementation from WM8903Mark Brown
We're already flagged as using symmetric rates so we don't need to have a custom implementation. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-11ASoC: Implement WM8903 oversampling rate controlsMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-11ASoC: Implement WM8903 high pass filter supportMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-10ASoC: Add HP iPAQ H1940 supportVasily Khoruzhick
Add glue driver to make s3c24xx-i2s and uda1380 produce some sound on H1940. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-10ASoC: Implement WM8994/58 DAC and ADC oversampling controlMark Brown
The oversampling rate of the DAC and ADC can be controlled to optimise for either low power consumption or maximum performance. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-10ASoC: Optimise WM9081 FLL performanceMario Becroft
Tune the FLL gain for optimal performance according to evaluation results. Signed-off-by: Mario Becroft <mb@gem.win.co.nz> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-09Merge branch 'for-2.6.37' into for-2.6.38Mark Brown
2010-12-09ASoC: EP93xx: sampling rate range extendedAlexander Sverdlin
Changes to both I2S and PCM code: - Rates list extended up to 96kHz, it's tested on EDB9302 and works for both capture and playback. Signed-off-by: Alexander Sverdlin <subaparts@yandex.ru> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-09ASoC: WM8580: Fix R8 initial valueSeungwhan Youn
Acc to WM8580 manual, the default value for R8 is 0x10, not 0x1c. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2010-12-09ASoC: fix deemphasis control in wm8904/55/60 codecsDmitry Artamonow
Deemphasis control's .get callback should update control's value instead of returning it - return value of callback function is used for indicating error or success of operation. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2010-12-08ASoC: Add ADC high pass filter support to WM8994Uk Kim
Signed-off-by: Uk Kim <w0806.kim@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-08ASoC: Support WM8994 mono AIF configurationsMark Brown
The WM8994 supports mono signals - enable this in the driver. With DSP mode an automatic data channel selector is available, activate this when in mono mode. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-08ASoC: soc-core: Fix null pointer dereferenceDimitris Papastamos
In case the codec driver did not provide a read/write function, codec->driver->read|write will be NULL. Ensure that we use the one specified in codec->read|write to avoid oopsing when we access the debugfs entries. This is achieved by using snd_soc_read() and snd_soc_write(). Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-08Merge branch 'for-2.6.37' into for-2.6.38Mark Brown
Conflicts: sound/soc/soc-core.c Axel's fix on two different branches.
2010-12-07ASoC: Correct WM8962 interrupt mask register readMark Brown
Fix mismerge from the out of tree BSP where this support was developed. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-07ASoC: WM8580: Debug BCLK and sample sizeJassi Brar
In case of SNDRV_PCM_FORMAT_S32_LE, we need to set WM8580_AIF_LENGTH_32, rather than WM8580_AIF_LENGTH_24. Also, the BCLK has to be 64fs, for sample size of 20, 24 and 32 bits. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-07ASoC: Fix snd_soc_instantiate_card error pathAxel Lin
Properly free the resources in the case of snd_card_register failure and soc_register_ac97_dai_link failure. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-07ASoC: Fix resource leak if soc_register_ac97_dai_link failedAxel Lin
Properly free the resources in the case of soc_register_ac97_dai_link failure. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-06ASoC: soc-core: Remove useless inline function constructDimitris Papastamos
There is no need to mark this function as inline. Inline functions usually are small and concise functions that benefit from not needing to set up a stack frame and undergo a call/ret sequence upon each invocation. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-06ASoC: soc-core: Replace use of strncpy() with strlcpy()Dimitris Papastamos
By using strncpy() if the source string does not have a null byte in the first n bytes, then the destination string is not null-terminated. This can be fixed in a two-step process by manually null-terminating the array after the use of strncpy() or by using strlcpy(). Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-06ASoC: Merge common code in DAI link and auxiliary codec probing/removalJarkko Nikula
Commit 2eea392 "ASoC: Add support for optional auxiliary dailess codecs" added much of code that can be shared with DAI link codec probing/removal. Merge now this common code into new soc_probe_codec, soc_remove_codec and soc_post_component_init functions. Error prints in these functions are converted to use dev_err and to print the error code. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-06Merge branch 'for-2.6.37' into for-2.6.38Mark Brown
Conflicts: include/linux/mfd/wm8994/pdata.h
2010-12-06ASoC: soc-cache: Add optional cache name member to snd_soc_cache_opsDimitris Papastamos
Added an optional name member to snd_soc_cache_ops to enable more sensible diagnostic messages during cache init, exit and sync. Remove redundant newline in source code. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-06ASoC: SAMSUNG: Remove duplicated snd_card on smdk_spdifSeungwhan Youn
This patch remove duplicated snd_card defination on smdk_spdif. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-06ASoC: SAMSUNG: Fix initial return valueSeungwhan Youn
This patch fixed intial return value to be a '0' as asuccess on set_audio_clock_heirachy(). This avoids unintended error on initialize. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-06ASoC: Add trace events for jack detectionMark Brown
As jack detection can trigger DAPM and the latency in debouncing can create confusing windows in operation provide some trace events which will hopefully help in diagnostics. The soc-jack core traces all reports that it gets and the resulting notifications to upper layers. An event for jack IRQs is also provided for instrumentation of debounce, and used in the GPIO jack code. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-06ASoC: Hold client_mutex while calling snd_soc_instantiate_cards()Axel Lin
As the comments of snd_soc_instantiate_cards() said, snd_soc_instantiate_cards() must be called with client_mutex. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-06ASoC: Fix swap of left and right channels for WM8993/4 speaker boost gainUk Kim
SPKOUTL_BOOST start from third bit, SPKOUTLR_BOOST start from 0 bit. Signed-off-by: Uk Kim <w0806.kim@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2010-12-06ASoC: Add post-CODEC bias level callback for machine driverMark Brown
Currently the machine driver can only do bias level configuration before the CODEC bias level is brought up. This means that the machine cannot do any configuration which depends on the CODEC bias level being maintained. Provide a post-CODEC callback which allows the machine driver to do things like enable the FLL on a CODEC which is brought down to BIAS_OFF when idle. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-03Merge branch 'for-2.6.37' into for-2.6.38Mark Brown
2010-12-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ASoC: omap: N810: Don't select CONFIG_OMAP_MUX but make it as dependency ALSA: hda: Use "alienware" model quirk for another SSID ASoC: WM8731: Fix incorrect mask for bypass path disable s6105-ipcam: fix compilation s6000-pcm: fix compilation s6000-i2s: fix compilation ASoC: Fix missing spin_unlock_irqrestore ALSA: Fix SNDCTL_DSP_RESET ioctl for OSS emulation ASoC: Add missing dev_set_drvdata in p1022_ds_probe ASoC: Add missing dev_set_drvdata in mpc8610_hpcd_probe ASoC: Remove unneeded !! operations while checking return value of nuc900_checkready ASoC: Fix compile error for nuc900-pcm.c ASoC: Fix prototype for nuc900_ac97_probe and nuc900_ac97_remove ASoC: Fix compile error for nuc900-ac97.c ALSA: hda: Use BIOS auto-parsing instead of existing model quirk for MEDION MD2
2010-12-03ASoC: When disabling WM8994 FLL force a source selectionMark Brown
When we disable the WM8994 FLL code path sharing means that we end up writing out a configuration. Currently this is the currently active input and output frequency (which causes snd_soc_update_bits() to suppress actual writes both immediately and in the common case where we reenable the same configuration later) but we allow machine drivers to pass through a source of zero. Since the register values written are one less than the source constants this causes corruption of other bitfields in the register. Fix this by using the most recently configured FLL source when none is provided. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
2010-12-03ASoC: WM8580: Debug interface indexJassi Brar
We want the index of DAI's driver here. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-03ASoC: Constify struct snd_soc_codec_driverMark Brown
Allow the CODEC driver structure to be marked const by making all the APIs that use it do so. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-02-28 10:37:21 +0000