aboutsummaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2012-02-28ALSA: hda - Add position_fix=4 (COMBO) optionTakashi Iwai
This patch adds a new position_fix option value, 4, as a combo mode to use LPIB for playbacks and POSBUF for captures. It's the way recommended by Intel hardware guys. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-28ALSA: hda - Fix audio playback support on HP Zephyr systemVitaliy Kulikov
Enables port E of IDT 92HD91 codec as output and sets correct output phase between ports E and D and high pass filter. Signed-off-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-27ALSA: Use a define for the number of jack switch typesMark Brown
This is intended to facilitate the merge of the two jack detection mechanisms. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-27ASoC: wm8753: Convert to devm_kzalloc()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-27ASoC: fix trivial build error in mpc5200_dma.cPaul Gortmaker
Add the obvious header to fix this: sound/soc/fsl/mpc5200_dma.c:301: error: implicit declaration of function 'DMA_BIT_MASK' sound/soc/fsl/mpc5200_dma.c:301: error: initializer element is not constant Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-27ASoC: imx: let SND_MXC_SOC_FIQ select FIQShawn Guo
CONFIG_FIQ is only needed when CONFIG_SND_MXC_SOC_FIQ is selected to build imx-pcm-fiq.c, so let SND_MXC_SOC_FIQ select FIQ. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-25ALSA: azt3328 - Fix NULL ptr dereference on cards without OPL3Alban Bedel
opl3->private_data was set even if opl3 could not be created. Signed-off-by: Alban Bedel <albeu@free.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-25ALSA: hda/realtek - Fix resume of multiple input sourcesTakashi Iwai
When there are multiple input sources, the driver wrongly overwrites with the value of the last input source on other slots at resume. Thus the primary input source may be shown wrongly. Reported-and-tested-by: Julian Sikorski <belegdol@gmail.com> Cc: <stable@kernel.org> [v3.1+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-25ALSA: snd-usb-6fire: Select missing SND_VMASTER option in KconfigTorsten Schenk
Signed-off-by: Torsten Schenk <torsten.schenk@zoho.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-24ASoC: core: Don't overwrite .poweroff in snd_soc_pm_opsViresh Kumar
SET_SYSTEM_SLEEP_PM_OPS writes .poweroff = *_resume once. Then we overwrite it again explicitly as .poweroff = snd_soc_poweroff. Even though it works, as the second one overwrites the first one, this is not the correct way. Fix this by expanding SET_SYSTEM_SLEEP_PM_OPS in our structure. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-23ASoC: wm8962: Convert interrupt handler to direct regmap usageMark Brown
Avoids potential locking issues with anything that needs the CODEC lock. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-23ASoC: i.MX SSI: Fix DSP_A format.Javier Martin
According to i.MX27 Reference Manual (p 1593) TXBIT0 bit selects whether the most significant or the less significant part of the data word written to the FIFO is transmitted. As DSP_A is the same as DSP_B with a data offset of 1 bit, it doesn't make any sense to remove TXBIT0 bit here. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-02-23ALSA: ctxfi: Fix typo in ctvmem.cMasanari Iida
Correct spelling "virtural" to "virtual" in sound/pci/ctxfi/ctvmem.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-23ASoC: wm8962: Remove mistakenly committed debug loggingMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-23ASoC: ak4104: Convert to direct regmap API usageMark Brown
Since the cache is currently open coded this is more of a win than for most devices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Daniel Mack <zonque@gmail.com>
2012-02-23ASoC: ak4104: Use snd_soc_write() rather than internal write functionMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Daniel Mack <zonque@gmail.com>
2012-02-23ASoC: ak4104: Use snd_soc_update_bits() for read/modify/writeMark Brown
Don't use the internal I/O functions directly. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Daniel Mack <zonque@gmail.com>
2012-02-23ASoC: dapm: Check for bias level when powering downMark Brown
Recent enhancements in the bias management means that we might not be in standby when the CODEC is idle and can have active widgets without being in full power mode but the shutdown functionality assumes these things. Add checks for the bias level at each stage so that we don't do transitions other than the ON->PREPARE->STANDBY->OFF ones that the drivers are expecting. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2012-02-23ALSA: hda - add id for Atom Cedar Trail HDMI codecWu Fengguang
[the order sorted by tiwai] Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-22ALSA: snd-usb-6fire: add analog input volume controlTorsten Schenk
Add a stereo volume control for analog input channel pair 1/2. Signed-off-by: Torsten Schenk <torsten.schenk@zoho.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-22ALSA: snd-usb-6fire: add mute control for analog outputsTorsten Schenk
Add a mute control for every analog output channel. Signed-off-by: Torsten Schenk <torsten.schenk@zoho.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-22ALSA: snd-usb-6fire: add individual volume control for analog channelsTorsten Schenk
Add a stereo volume control for every analog output pair 1/2, 3/4, 5/6. Signed-off-by: Torsten Schenk <torsten.schenk@zoho.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-22ALSA: snd-usb-6fire: add tlv to controlsTorsten Schenk
Remove the soft log-conversion and add a dB scale according to the DAC documentation instead. Signed-off-by: Torsten Schenk <torsten.schenk@zoho.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-22ALSA: snd-usb-6fire: remove driver version informationTorsten Schenk
Remove unused driver version information from the individual files. Signed-off-by: Torsten Schenk <torsten.schenk@zoho.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-22mfd/ASoC: Convert WM8994 driver to use regmap patchesMark Brown
Early revisions of several of the WM8994 variants have register updates to improve performance. Move these over to using the regmap patch system instead of open coding them in the audio driver. Since the regmap init is done by the MFD the code is moved there. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-02-22ASoC: mxs-pcm: Request DMA channel earlyLars-Peter Clausen
Request the DMA channel in the PCM open callback instead of the hwparams callback, this allows us to let open fail if no dma channel is available. This also fixes a bug where the channel will be requested multiple times if hwparams is called multiple times. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-22ASoC: imx-pcm: Request DMA channel earlyLars-Peter Clausen
Request the DMA channel in the pcm open callback. This allows us to let open fail if there is no dma channel available. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-22ASoC: imx-ssi: Set dma data earlyLars-Peter Clausen
Move the call to snd_soc_dai_set_dma_data from the hw_params callback to the startup callback. This allows us to use the dma data in the pcm driver's open callback. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-22dmaengine/dw_dmac: Fix dw_dmac user drivers to adapt to slave_config changesViresh Kumar
There are few existing user drivers of dw_dmac. They will break as soon as we remove unused fields from struct dw_dma_slave. This patch focuses to fix these user drivers to use dma_slave_config() routine. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-02-22dmaengine: Pass dma_slave_config .device_fc = NULL for all existing usersViresh Kumar
.device_fc is added in struct dma_slave_config recently. All user drivers, which want DMA to be the flow controller must pass this field as false. As earlier driver don't look to use this feature, mark it false for now. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-02-22ALSA: hda/via - Add a few sanity checksTakashi Iwai
Added sanity checks in a few places not to assume the pins having the certain amp caps or the input-source being always assigned to a mux. No actual bugs have been triggered by these, but surely better to be a bit more robust. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-22ALSA: hda/via - Don't create duplicated boost controlsTakashi Iwai
The driver may create duplicated mic boost controls when there are multiple mics with the very same type / location, and this leads to the error at actual kcontrol creation. It needs to check the validity of the created control and add a proper index if it's duplicated. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-22ALSA: snd-usb-caiaq: Fix the return of XRUNMark Hills
Commit 3702b08 added a lock, but did not account for the case of SNDRV_PCM_POS_XRUN, which would get immediately overwritten. This could be bundled into one if-else-if statement, but the goto helps to clarify the 'exceptional' case. Thanks to Andreas Pape for spotting this. Signed-off-by: Mark Hills <mark@pogo.org.uk> Acked-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21ASoC: wm8994: Move wm_hubs callback before we start ramping VMIDMark Brown
Allows the generic code to set up for that. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-21Merge tag 'asoc-3.3' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus A couple of small, driver specific fixes - nothing too exciting going on.
2012-02-21ASoC: wm8996: Convert to use DAPM routes for stream connectionsMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-21ASoC: wm5100: Implement DRC coefficient configurationMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-21ASoC: wm8996: Implement DRC coefficient configurationMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-21ASoC: core: Add support for masking out parts of coefficient blocksMark Brown
Chip designers frequently include things like the enable and disable controls for algorithms in the register blocks which also hold the coefficients. Since it's desirable to split out the enable/disable control from userspace the plain SND_SOC_BYTES() isn't optimal for these devices. Add a SND_SOC_BYTES_MASK() which allows a bitmask from the first word of the block to be excluded from the control. This supports the needs of devices I've looked at and lets us have a reasonably simple API. Further controls can be added in future if that's needed. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-02-21ASoC: core: Add SND_SOC_BYTES control for coefficient blocksMark Brown
Allow devices to export blocks of registers to the application layer, intended for use for reading and writing coefficient data which can't usefully be worked with by the kernel at runtime (for example, due to requiring complex and expensive calculations or being the results of callibration procedures). Currently drivers are using platform data to provide configurations for coefficient blocks which isn't at all convenient for runtime management or configuration development. Currently only devices using regmap are supported, an error will be generated for any attempt to work with a byte control on a non-regmap device. There's no fundamental block to other devices so support could be added if required. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-02-21ASoC: io: Retrieve val_bytes from the regmap APIMark Brown
Allow us to build infrastructure which needs to know the size of a value without requiring regmap based drivers to supply this information to both ASoC and regmap by asking regmap for the value. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-02-21ASoC: mxs-pcm: Remove unused fields from struct mxs_pcm_runtime_dataLars-Peter Clausen
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-21ASoC: imx-pcm: Remove unused fields from imx_pcm_runtime_data structLars-Peter Clausen
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-21ASoC: imx-pcm: Remove empty prepare callbackLars-Peter Clausen
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-21ASoC: wm8994: Support external capacitors on MICBIAS2 with jack detectionMark Brown
When an external capacitor is connected to MICBIAS2 on devices with jack detection (which is not required but may be done in some systems) then the loading may mean that better performance is obtained when the microphone bias is enabled normally rather than using the low power mode. Provide platform data allowing systems to indicate if they require this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-21ASoC: wm8994: Actively discharge idle MICBIAS with jack detectMark Brown
This minimises the chance of any external capacitors that are fitted being discharged into headphones as they insert. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-21ALSA: hda/realtek - Small code cleanupsTakashi Iwai
A few clean-ups for post-static-quirk time: - Call alc_auto_init_std() statically in alc_init() instead of setting spec->init_hook in each caller. spec->init_hook field is left unused for any future use. - Move the call of set_capture_mixer() to to alc_parse_auto_config() instead of each caller. - Get rid of the ADC-filling and imux check in each parser function. This is no longer needed since the auto-parser always check ADCs and imux. It was only for the static quirks. - Kill unused defines Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21ALSA: hda/realtek - Fix the wrong offset for two-speaker systemsTakashi Iwai
When the machine has two speakers but wants to put more multi-io jacks, the parser shouldn't consider about the shared DAC but try to assign the individual DACs. Otherwise the channel mapping would be fairly confused and lead to the wrong DACs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21ALSA: hda/realtek - Fix the possible conflicts of Bass Speaker nameTakashi Iwai
When the multi-io is added to the two speaker output configuration, the parser would try to add yet another "Bass Speaker" control since it checks only cfg->line_outs. Add a workaround for it by simply passing the channel name in the case of multi-io outputs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21ALSA: hda/realtek - Create individual mute switches for shared DACTakashi Iwai
Even if the outputs are using shared DACs, we can still create individual mute siwtches since they are assigned per pin. This allows to create, e.g. Speaker and Bass Speaker mute switches while the single volume is used for these outputs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-04-19 05:28:45 +0000