aboutsummaryrefslogtreecommitdiff
path: root/sound/usb/stream.c
AgeCommit message (Collapse)Author
2013-06-27ALSA: usb-audio: add support for many Roland/Yamaha devicesClemens Ladisch
Add quirks to detect the various vendor-specific descriptors used by Roland and Yamaha in most of their recent USB audio and MIDI devices. Together with the previous patch, this should add audio/MIDI support for the following USB devices: - Edirol motion dive .tokyo performance package - Roland MC-808 Synthesizer - Roland BK-7m Synthesizer - Roland VIMA JM-5/8 Synthesizer - Roland SP-555 Sequencer - Roland V-Synth GT Synthesizer - Roland Music Atelier AT-75/100/300/350C/500/800/900/900C Organ - Edirol V-Mixer M-200i/300/380/400/480/R-1000 - BOSS GT-10B Effects Processor - Roland Fantom G6/G7/G8 Keyboard - Cakewalk Sonar V-Studio 20/100/700 Audio Interface - Roland GW-8 Keyboard - Roland AX-Synth Keyboard - Roland JUNO-Di/STAGE/Gi Keyboard - Roland VB-99 Effects Processor - Cakewalk UM-2G MIDI Interface - Roland A-500S Keyboard - Roland SD-50 Synthesizer - Roland OCTAPAD SPD-30 Controller - Roland Lucina AX-09 Synthesizer - BOSS BR-800 Digital Recorder - Roland DUO/TRI-CAPTURE (EX) Audio Interface - BOSS RC-300 Loop Station - Roland JUPITER-50/80 Keyboard - Roland R-26 Recorder - Roland SPD-SX Controller - BOSS JS-10 Audio Player - Roland TD-11/15/30 Drum Module - Roland A-49/88 Keyboard - Roland INTEGRA-7 Synthesizer - Roland R-88 Recorder Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-06-27ALSA: usb-audio: store protocol version in struct audioformatClemens Ladisch
Instead of reading bInterfaceProtocol from the descriptor whenever it's needed, store this value in the audioformat structure. Besides simplifying some code, this will allow us to correctly handle vendor- specific devices where the descriptors are marked with other values. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-04-25ALSA: snd-usb: try harder to find USB_DT_CS_ENDPOINTDaniel Mack
The USB_DT_CS_ENDPOINT class-specific endpoint descriptor is usually stuffed directly after the standard USB endpoint descriptor, and this is where the driver currently expects it to be. There are, however, devices in the wild that have it the other way around in their descriptor sets, so the USB_DT_CS_ENDPOINT comes *before* the standard enpoint. Devices known to implement it that way are "Sennheiser BTD-500" and Plantronics USB headsets. When the driver can't find the USB_DT_CS_ENDPOINT, it won't be able to change sample rates, as the bitmask for the validity of this command is storen in bmAttributes of that descriptor. Fix this by searching the entire interface instead of just the extra bytes of the first endpoint, in case the latter fails. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-and-tested-by: Torstein Hegge <hegge@resisty.net> Reported-and-tested-by: Yves G <alsa-user@vivigatt.com> Cc: stable@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-13ALSA: usb: Add quirk for 192KHz recording on E-Mu devicesCalvin Owens
When recording at 176.2KHz or 192Khz, the device adds a 32-bit length header to the capture packets, which obviously needs to be ignored for recording to work properly. Userspace expected: L0 L1 L2 R0 R1 R2 ...but actually got: R2 L0 L1 L2 R0 R1 Also, the last byte of the length header being interpreted as L0 of the first sample caused spikes every 0.5ms, resulting in a loud 16KHz tone (about the highest 'B' on a piano) being present throughout captures. Tested at all sample rates on an E-Mu 0404USB, and tested for regressions on a generic USB headset. Signed-off-by: Calvin Owens <jcalvinowens@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-04ALSA: usb-audio: convert list_for_each to entry variantEldad Zack
Change occurances of list_for_each into list_for_each_entry where applicable. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-18ALSA: snd-usb: handle the bmFormats field as unsigned intDaniel Mack
This field may use up to 32 bits, so it should be handled as unsigned int. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-by: Andreas Koch <andreas@akdesigninc.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-26ALSA: usb-audio: add channel map supportTakashi Iwai
Add the support for channel maps of the PCM streams on USB audio devices. The channel map information is already found in ChannelConfig descriptor entries, which haven't been referred until now. Each chmap entry is added to audioformat list entry and copied to TLV dynamically instead of creating a whole chmap array. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-30ALSA: usb-audio: Fix races at disconnectionTakashi Iwai
Close some races at disconnection of a USB audio device by adding the chip->shutdown_mutex and chip->shutdown check at appropriate places. The spots to put bandaids are: - PCM prepare, hw_params and hw_free - where the usb device is accessed for communication or get speed, in mixer.c and others; the device speed is now cached in subs->speed instead of accessing to chip->dev The accesses in PCM open and close don't need the mutex protection because these are already handled in the core PCM disconnection code. The autosuspend/autoresume codes are still uncovered by this patch because of possible mutex deadlocks. They'll be covered by the upcoming change to rwsem. Also the mixer codes are untouched, too. These will be fixed in another patch, too. Reported-by: Matthieu CASTET <matthieu.castet@parrot.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-08ALSA: usb-audio: Fix substream assignmentsTakashi Iwai
In 3.5 kernel, the endpoint is assigned dynamically for the substreams, but the PCM assignment still checks the presence of the endpoint pointer. This ended up in duplicated PCM substream creations at probing time, resulting in kernel warnings like: WARNING: at fs/proc/generic.c:586 proc_register+0x169/0x1a6() Pid: 1152, comm: modprobe Not tainted 3.5.0-rc1-00110-g71fae7e #2 Call Trace: [<ffffffff8102a400>] warn_slowpath_common+0x83/0x9c [<ffffffff8102a4bc>] warn_slowpath_fmt+0x46/0x48 [<ffffffff813829ad>] ? add_preempt_count+0x39/0x3b [<ffffffff811292f0>] proc_register+0x169/0x1a6 [<ffffffff8112962e>] create_proc_entry+0x74/0x8c [<ffffffffa018eb63>] snd_info_register+0x3e/0xc3 [snd] [<ffffffffa01fde2e>] snd_pcm_new_stream+0xb1/0x404 [snd_pcm] [<ffffffffa024861f>] snd_usb_add_audio_stream+0xd2/0x230 [snd_usb_audio] [<ffffffffa0241d33>] ? snd_usb_parse_audio_format+0x252/0x34f [snd_usb_audio] [<ffffffff810d6b17>] ? kmem_cache_alloc_trace+0xab/0xbb [<ffffffffa0248c29>] snd_usb_parse_audio_interface+0x4ac/0x567 [snd_usb_audio] [<ffffffffa023f0ff>] snd_usb_create_stream+0xe9/0x125 [snd_usb_audio] [<ffffffffa023f9b1>] usb_audio_probe+0x62a/0x72c [snd_usb_audio] ..... This patch fixes the regression by checking the fixed endpoint number for each substream instead of the endpoint pointer. Reported-and-tested-by: Jamie Heilman <jamie@audible.transient.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-13ALSA: snd-usb: switch over to new endpoint streaming logicDaniel Mack
With the previous commit that added the new streaming model, all endpoint and streaming related code is now in endpoint.c, and pcm.c only acts as a wrapper for handling the packet's payload. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-14ALSA: snd-usb: move code from urb.c to endpoint.cDaniel Mack
No code altered at this point, simply preparing for upcoming refactorizations. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-14ALSA: snd-usb: re-order codeDaniel Mack
Move code from endpoint.c into a new file called stream.c and rename functions so that their names actually reflect what they're doing. This way, endpoint.c will be available to functions that hold all the endpoint logic. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>