aboutsummaryrefslogtreecommitdiff
path: root/sound/soc/codecs/wm8962.c
AgeCommit message (Collapse)Author
2014-03-13Merge remote-tracking branch 'asoc/topic/io' into asoc-nextMark Brown
2014-03-12Merge remote-tracking branches 'asoc/topic/wm8961', 'asoc/topic/wm8962', ↵Mark Brown
'asoc/topic/wm8974', 'asoc/topic/wm8983', 'asoc/topic/wm8988', 'asoc/topic/wm8990', 'asoc/topic/wm8991', 'asoc/topic/wm8993' and 'asoc/topic/wm8994' into asoc-next
2014-03-11ASoC: codec: Simplify ASoC probe code.Xiubo Li
For some CODEC drivers like who act as the MFDs children are ignored by this patch. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-25ASoC: wm8962: Replace codec->control_data with wm8962->regmapLars-Peter Clausen
With the ongoing component-ization of the ASoC framework and the continuing migration to using regmap for IO the control_data field of the snd_soc_codec struct will eventually be removed. Prepare the wm8962 driver for this by using wm8962->regmap instead of accessing the CODEC's control_data field. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-23ASoC: wm8962: Use SOC_ENUM_SINGLE_DECL()Takashi Iwai
Just replace with the helper macro. No functional change at all. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-20ASoC: wm8962: Update locking around use of DAPM pin APICharles Keepax
The pin updates in this driver look like they are intended to be done atomically, update to do so. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: wm8962: Reinitialise the IRQ completion rather than just trying itMark Brown
This is better practice. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-02-03ASoC: wm8962: Clean up error handling for failed FLL startMark Brown
Don't record the FLL as having started and leave the hardware disabled ensuring we are in a better state if this does happen to be a transient error and making debugging easier. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-02-03ASoC: wm8962: Check if we runtime resume the device when starting FLLMark Brown
Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-02-03ASoC: wm8962: Hold a runtime PM reference while handling interruptsMark Brown
If the device is runtime suspended then we can't interact with it as it may have been powered off and the register map will be in cache only mode. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-01-02Merge remote-tracking branches 'asoc/topic/ad1836', 'asoc/topic/ad193x', ↵Mark Brown
'asoc/topic/adav80x', 'asoc/topic/adsp', 'asoc/topic/ak4641', 'asoc/topic/ak4642', 'asoc/topic/arizona', 'asoc/topic/atmel', 'asoc/topic/au1x', 'asoc/topic/axi', 'asoc/topic/bcm2835', 'asoc/topic/blackfin', 'asoc/topic/cs4271', 'asoc/topic/cs42l52', 'asoc/topic/da7210', 'asoc/topic/davinci', 'asoc/topic/ep93xx', 'asoc/topic/fsl', 'asoc/topic/fsl-mxs', 'asoc/topic/generic', 'asoc/topic/hdmi', 'asoc/topic/jack', 'asoc/topic/jz4740', 'asoc/topic/max98090', 'asoc/topic/mxs', 'asoc/topic/omap', 'asoc/topic/pxa', 'asoc/topic/rcar', 'asoc/topic/s6000', 'asoc/topic/sai', 'asoc/topic/samsung', 'asoc/topic/sgtl5000', 'asoc/topic/spear', 'asoc/topic/ssm2518', 'asoc/topic/ssm2602', 'asoc/topic/tegra', 'asoc/topic/tlv320aic3x', 'asoc/topic/twl6040', 'asoc/topic/txx9', 'asoc/topic/uda1380', 'asoc/topic/width', 'asoc/topic/wm8510', 'asoc/topic/wm8523', 'asoc/topic/wm8580', 'asoc/topic/wm8711', 'asoc/topic/wm8728', 'asoc/topic/wm8731', 'asoc/topic/wm8741', 'asoc/topic/wm8750', 'asoc/topic/wm8753', 'asoc/topic/wm8776', 'asoc/topic/wm8804', 'asoc/topic/wm8900', 'asoc/topic/wm8901', 'asoc/topic/wm8940', 'asoc/topic/wm8962', 'asoc/topic/wm8974', 'asoc/topic/wm8985', 'asoc/topic/wm8988', 'asoc/topic/wm8990', 'asoc/topic/wm8991', 'asoc/topic/wm8994', 'asoc/topic/wm8995', 'asoc/topic/wm9081' and 'asoc/topic/x86' into asoc-next
2013-12-05ASoC: wm8962: Enable SYSCLK provisonally before fetching generated DSPCLK_DIVNicolin Chen
DSPCLK_DIV can be only generated correctly after enabling SYSCLK. But if the current bias_level hasn't reached SND_SOC_BIAS_ON, DAPM won't enable SYSCLK, which would cause the calculation result from DSPCLK_DIV invalid since bit DSPCLK_DIV will be finally turned to its true value after DAPM enables SYSCLK while the driver won't calculate it again for the current instance. In this circumstance, a playback which needs non-zero DSPCLK_DIV would be distorted due to unexpected clock frequency resulted from an invalid DSPCLK_DIV value. So this patch provisionally enables the SYSCLK to get a valid DSPCLK_DIV for calculation and then disables it afterward. Signed-off-by: Nicolin Chen <b42378@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-24ASoC: wm8962: Use IS_ENABLED() macroFabio Estevam
Using the IS_ENABLED() macro can make the code shorter and simpler. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-16Merge tag 'asoc-v3.13-4' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.13 A few fixes in drivers, the i.MX and wm8962 fixes are for a pretty nasty issues for users of those drivers if they run into them.
2013-11-15Merge remote-tracking branch 'asoc/fix/wm8962' into asoc-linusMark Brown
2013-11-14ASoC: wm8962: Turn on regcache_cache_only before disabling regulatorNicolin Chen
It's safer to turn on regcache_cache_only before disabling regulator since the driver will turn off the regcache_cache_only after enabling regulator. If we remain cache_only false, some command like 'amixer cset' would get failure if being run before wm8962_resume(). Signed-off-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2013-11-08Merge remote-tracking branch 'asoc/topic/wm8962' into asoc-nextMark Brown
2013-11-07ASoC: wm8962: Replace BUG() with WARN()Takashi Iwai
BUG() used in the driver is just to spit the stack trace on buggy points, not really needed to stop the whole operation. For that purpose, it'd be more convenient to use WARN() instead with more error information. Cc: patches@opensource.wolfsonmicro.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-01ASoC: wm8962: Add EQ coefficient supportRichard Fitzgerald
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-01ASoC: wm8962: Add ALC coefficient supportRichard Fitzgerald
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-29ASoC: wm8962: Fix null pointer pdata access in I2C probe()Nicolin Chen
When using DT binding to pass private data, there would be Kernel panic occuring due to NULL pointer access in wm8962_i2c_probe(). Thus fix it. Signed-off-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-18ASoC: wm8962: Move register initialisation to I2C probe()Mark Brown
This is more idiomatic and is required for robust operation since we must ensure that the clocking configuration is valid as rapidly as possible. Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-18ASoC: wm8962: Move interrupt initalisation to probe()Mark Brown
This is more idiomatic and fixes bugs in the error handling paths. Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-23Merge tag 'asoc-v3.12' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Updates for v3.12 - DAPM is now mandatory for CODEC drivers in order to avoid the repeated regressions in the special cases for non-DAPM CODECs and make it easier to integrate with other components on boards. All existing drivers have had some level of DAPM support added. - A lot of cleanups in DAPM plus support for maintaining controls in a specific state while a DAPM widget all contributed by Lars-Peter Clausen. - Core helpers for bitbanged AC'97 reset from Markus Pargmann. - New drivers and support for Analog Devices ADAU1702 and ADAU1401(a), Asahi Kasei Microdevices AK4554, Atmel AT91ASM9x5 and WM8904 based machines, Freescale S/PDIF and SSI AC'97, Renesas R-Car SoCs, Samsung Exynos5420 SoCs, Texas Instruments PCM1681 and PCM1792A and Wolfson Microelectronics WM8997. - Support for building drivers that can support it cross-platform for compile test.
2013-07-22ASoC: wm8962: Use power efficient workqueueMark Brown
The accessory detect debounce work is not performance sensitive so let the scheduler run it wherever is most efficient rather than in a per CPU workqueue by using the system power efficient workqueue. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2013-07-21ALSA: replace strict_strto*() with kstrto*()Jingoo Han
The usage of strict_strto*() is not preferred, because strict_strto*() is obsolete. Thus, kstrto*() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-19ASoC: wm8962: Do not call configure_bclk() inside wm8962_set_dai_sysclk()Fabio Estevam
Currently after playing any audio file, we get the following error message: $ aplay clarinet.wav Playing WAVE 'clarinet.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo $ wm8962 0-001a: Unsupported sysclk ratio 544 This error message appears about 5 seconds after the audio playback has finished. Quoting Mark Brown [1]: "The issue here is triggered by the machine switching from the FLL to direct MCLK usage where the MCLK isn't generating a useful ratio. I suspect we should just kill the configure_bclk() in set_sysclk(), that one isn't safe as we can't reconfigure a live SYSCLK and it's probably the one that generates your warnings." Confirmed that the "Unsupported sysclk ratio" error message comes from wm8962_set_dai_sysclk(), so get rid of wm8962_configure_bclk() inside this function. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2013-July/064241.html Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-04ASoC: wm8962: fix NULL pdata pointerShawn Guo
There is an error in merge commit 384b834 on conflict resolution which causes the following NULL pdata pointer bug. wm8962 0-001a: customer id 0 revision D Unable to handle kernel NULL pointer dereference at virtual address 00000004 pgd = 80004000 [00000004] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0+ #1 task: bf870000 ti: bf874000 task.ti: bf874000 PC is at wm8962_probe+0x134/0x6c8 LR is at regmap_unlock_mutex+0x10/0x14 pc : [<80452100>] lr : [<80304cf4>] psr: a0000113 sp : bf875c98 ip : 00000000 fp : bf875cd4 r10: 00000000 r9 : bfb1830c r8 : 80779bc4 r7 : 00000000 r6 : 00000001 r5 : bfbac010 r4 : bfb33e00 r3 : 80304ce4 r2 : 00000000 r1 : 00000001 r0 : fffffffb Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 1000404a DAC: 00000017 Process swapper/0 (pid: 1, stack limit = 0xbf874238) Stack: (0xbf875c98 to 0xbf876000) ... Fix the error by assigning pdata a correct pointer. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-17Merge remote-tracking branch 'asoc/topic/wm8962' into asoc-nextMark Brown
2013-06-14ASoC: wm8962: Enable start-up and normal bias after reset in runtime resumeNicolin Chen
This part of bias settings are essential for WM8962 to power up. Without it "wm8962 0-001a: DC servo timed out" might be prompted due to power-up failure that happens to FLL if being used. The driver's also bringing the bias down in the suspend path so it needs to be powered up in the resume path for symmetry. According to dapm_pre_sequence_async(), DAPM would call pm_runtime_get_sync() to let driver finish the bias settings in pm_runtime_resume() before the bias level being set to STANDBY. So no need to worry about disordered settings for VMID of WM8962. Signed-off-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-14Merge branch 'fix/wm8962' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-wm8962 Conflicts: sound/soc/codecs/wm8962.c
2013-06-14ASoC: wm8962: Remove remaining direct register cache accessesNicolin Chen
Also fix return values for headphone switch updates. Signed-off-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2013-06-10ASoC: wm8962: Restore device state after reset in runtime resumeMark Brown
After the device has been reset we need to repeat the same initialisation we do on probe to make sure that the device is in a known state. Tested-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-07ASoC: wm8962: Add device tree bindingNicolin Chen
Document the device tree binding for the WM8962 codec, and modify the driver to extract platform data from the device tree, if present. Based on work of WM8903 by Stephen Warren <swarren@nvidia.com> Signed-off-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-06ASoC: WM8962: Create default platform data structureNicolin Chen
Embed a copy of struct wm8962_pdata in stuct wm8962_priv so that there's no need to check validity of pdata any more. Signed-off-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2012-12-24ASoC: wm8962: Unconditionally wait for the FLL to lockMark Brown
If the FLL is being shut down we will exit early so there is no need to check here and in fact we're checking the wrong thing anyway. Reported-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-24ASoC: wm8962: Convert to devm_input_allocate_device()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-24ASoC: wm8962: Add device tree supportFabio Estevam
Add device tree support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-10ASoC: codecs: remove __dev* attributesBill Pemberton
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-02ASoC: wm8962: Use devm_regmap_init_i2c()Sachin Kamat
devm_regmap_init_i2c() is device managed and makes error handling and code cleanup simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-28ASoC: wm8962: Use devm_regulator_bulk_getSachin Kamat
devm_regulator_bulk_get() is device managed and makes error handling and code cleanup simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-09ASoC: wm8962: Don't duplicate bias level management in resumeMark Brown
The core will bring the bias level up for us since we use idle_bias_off, duplicating this may be harmful. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-31ASoC: wm8962: Allow VMID time to fully rampMark Brown
Required for reliable power up from cold. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-07-12ASoC: wm8962: Redo early init of the part on resumeMark Brown
Ensure robust startup of the part by going through the reset procedure prior to resyncing the full register cache, avoiding potential intermittent faults in some designs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-07-03ASoC: wm8962: Log AIF configuration requested by hw_params()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03ASoC: codecs: Refresh copyrights for Wolfson driversMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-04ASoC: codecs: Remove rtd->codec usage from CODEC driversMark Brown
In order to support CODEC<->CODEC links remove the assumption that there is only a single CODEC on a DAI link by removing the use of the CODEC pointer in the rtd from the CODEC drivers. They are already being passed their DAI whenever they are passed an rtd and can get the CODEC from there. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: wm8962: Add HPF coefficient configuration supportMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: wm8962: Add HD Bass and VSS coefficient configurationMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: wm8962: Add Dynamic Range Control supportMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-26 16:06:10 +0000