aboutsummaryrefslogtreecommitdiff
path: root/sound/pci/hda/hda_proc.c
AgeCommit message (Collapse)Author
2013-02-07ALSA: hda - Remove limit of widget connectionsTakashi Iwai
Currently we set the max number of connections to be 32, but there seems codec that gives longer connection lists like AD1988, and we see errors in proc output and else. (Though, in the case of AD1988, it's a list of all codecs connected to a single vendor widget, so this must be something fishy, but it's still valid from the h/w design POV.) This patch tries to remove this restriction. For efficiency, we still use the fixed size array in the parser, but takes a dynamic array when the size is reported to be greater than that. Now the fixed array size is found only in patch_hdmi.c, but it should be fine, as the codec itself can't support so many pins. Reported-by: Raymond Yau <superquad.vortex2@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-23Merge branch 'topic/hda-gen-parser' into for-nextTakashi Iwai
This is a merge of really big changes: the generic parser is heavily enhanced for handling all cases, based on the former Realtek codec driver code. And all codec drivers except for a few ones (CA0132, HDMI and modem) have been converted to use the new generic driver. Conflicts: sound/pci/hda/patch_realtek.c
2013-01-10ALSA: hda - Fix mono amp values in proc outputTakashi Iwai
The mono widget is always connected to the left channel, thus the left channel amp value also should be referred for mono widgets instead of the right channel. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-08ALSA: hda - print power state for AFG node in proc fileDavid Henningsson
It seems useful, and power states are required for AFG nodes, so I see no reason not to print it. As a bonus, also print the AFG nid. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-20Merge branch 'for-linus' into for-nextTakashi Iwai
Conflicts: sound/pci/hda/hda_codec.c Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-13ALSA: hda - fix Copyright debug messageWang Xingchao
As spec said, 1 indicates no copyright is asserted. Signed-off-by: Wang Xingchao <xingchao.wang@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-13ALSA: hda - show ICT/KAE control bitsWang Xingchao
Enable two debug options for S/PDIF Converter Control. KAE: Keep Alive Enable; ICT: IEC Coding Type. Signed-off-by: Wang Xingchao <xingchao.wang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-07ALSA: hda - check proper return valueWang Xingchao
snd_hda_param_read() return value -1 means error, others are responses Signed-off-by: Wang Xingchao <xingchao.wang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-06ALSA: hda - Show D3cold state in proc filesTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-06ALSA: hda - add power states information in procWang Xingchao
add more power states information: - reset status - clock stop ok - power states error Output like: Power: setting=D0, actual=D0, Error, Clock-stop-OK, Setting-reset Signed-off-by: Wang Xingchao <xingchao.wang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-07ALSA: hda - Fix proc output for ADC amp values of CX20549Michael Karcher
The CX20549 has only one single input amp on it's input converter widget. Fix printing of values in the codec file in /proc/asound. Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-10ALSA: hda - Return the error from get_wcaps_type() for invalid NIDsTakashi Iwai
When an invalid NID is given, get_wcaps() returns zero as the error, but get_wcaps_type() takes it as the normal value and returns a bogus AC_WID_AUD_OUT value. This confuses the parser. With this patch, get_wcaps_type() returns -1 when value 0 is given, i.e. an invalid NID is passed to get_wcaps(). Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=740118 Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-06ALSA: hda - Moved snd_print_pcm_rates() back into hda_proc.cTakashi Iwai
Since hda_proc.c is now the only user of snd_print_pcm_rates(), better to put it back locally to hda_proc.c and revert to the old style. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-12ALSA: hda - Always read raw connections for proc outputTakashi Iwai
In the codec proc outputs, read the raw connections instead of the cached connection list, i.e. proc files contain only raw values. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-18ALSA: hda - consitify string arraysTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-19ALSA: hda-intel - do not mix audio and modem function IDsJaroslav Kysela
The function IDs are different for audio and modem. Do not mix them. Also, show the unsolicited bit in the function_id register. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2009-12-15ALSA: hda - introduce HDA_SUBDEV_AMP_FLAG (ControlAmp in proc)Jaroslav Kysela
The purpose of this changeset is to show information about amplifier setting in the codec proc file. Something like: Control: name="Front Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Front Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2009-12-15ALSA: hda - add more NID->Control mappingJaroslav Kysela
This set of changes add missing NID values to some static control elemenents. Also, it handles all "Capture Source" or "Input Source" controls. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2009-12-11ALSA: intelhdmi - accept DisplayPort pinWu Fengguang
HDA036 spec states: DP (Display Port) indicates whether the Pin Complex Widget supports connection to a Display Port sink. Supported if set to 1. Note that it is possible for the pin widget to support more than one digital display connection type, e.g. HDMI and DP bit are both set to 1. Also export the DP pin cap in procfs. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-11ALSA: hda - show HBR(High Bit Rate) pin cap in procfsWu Fengguang
Note that the HBR capability only applies to HDMI pin. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-18ALSA: hda - show EPSS capability in procWu Fengguang
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-16ALSA: hda - proc - introduce Control: lines to show mixer<->NID assignmentJaroslav Kysela
This is an initial patch to show universal control<->NID assigment in proc codec file. The change helps to debug codec related problems. Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-12ALSA: hda - Don't access invalid substream in proc fileTakashi Iwai
The commit e3303235209c0496b490e10ab131e72a9568c153 "ALSA: hda - proc - show which I/O NID is associated to PCM device" introduces the access to substream pointer. But, PCMs may have no substreams in one or both directions, and this results in NULL dereference. Also, print the first substream number doesn't make sense. This patch removes the access to the substream pointer, and reformat to fit to the standard coding style. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-10ALSA: hda - proc - show which I/O NID is associated to PCM deviceJaroslav Kysela
Output something like: Node 0x02 [Audio Output] wcaps 0x11: Stereo Device: name="ALC888 Analog", type="Audio", device=0, substream=0 Converter: stream=0, channel=0 ... Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-24ALSA: hda: move open coded tricks into get_wcaps_channels()Wu Fengguang
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-27ALSA: hda - Introduce get_wcaps_type() macroTakashi Iwai
Add a helper macro to retrieve the widget type from wiget cap bits. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-16ALSA: hda - Split codec->name to vendor and chip name stringsTakashi Iwai
Split the name string in hda_codec struct to vendor_name and chip_name strings to be stored directly from the preset name. Since mostly only the chip name is referred in many patch_*.c, this results in the reduction of many codes in the end. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-23ALSA: hda - Add function id to proc outputPascal de Bruijn
This patch does two things: Output Intel HDA Function Id in /proc/asound/cardX/codec#X Align Vendor/Subsystem/Revision Ids to 8 characters, front-padded with zeros Before: Vendor Id: 0x11d41884 Subsystem Id: 0x103c281a Revision Id: 0x100100 After: Function Id: 0x1 Vendor Id: 0x11d41884 Subsystem Id: 0x103c281a Revision Id: 0x0100100 As report on the Kernel Bugzilla #12888 Signed-off-by: Pascal de Bruijn <pascal@unilogicnetworks.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-19ALSA: hda - Don't show the current connection for power widgetsTakashi Iwai
The power-widgets have no connection selection, so skip the check in proc output, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-12ALSA: hda - Print multiple out-amp values of pin widgets on Conext codecsTakashi Iwai
Add a flag to work around the non-standard amp-value handling on Conexant codecs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-02ALSA: hda - No widget selection for volume knob widgets in proc outputTakashi Iwai
Volume-knob widgets have no widget selection although they have widget connections. Thus, the connection list in the proc output shouldn't contain the selection (*). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-28ALSA: hda - Add IDT/STAC-specific proc outputTakashi Iwai
Added power-map and analog-loopback information to proc output for IDT/STAC codecs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-28ALSA: hda - Add codec-specific proc hookTakashi Iwai
Added a hook for proc outputs of codec-specific stuff. Moved realtek-specific coeff output into patch_realtek.c as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-25ALSA: hda - Really fix bits value in proc outputTakashi Iwai
The fix in 82894b6f6f109722070d4d78730fe50cdaba9443 resulted in zero due to wrong mask and bit shifts. Now fixed really. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-25ALSA: hda - Fix proc pcm rate bitsTakashi Iwai
Show only the relevant bits in the PCM rate bits as in the earlier version. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-21ALSA: hda - Fix build without CONFIG_PROC_FSTakashi Iwai
snd_print_pcm_rates() and snd_print_pcm_bits() are used by both hda_proc.c and hda_eld.c, thus they have to be defined in the common place. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-21ALSA: hda - properly print ELD sample bitsWu Fengguang
Fix bugs on printing the ELD sample bits. Signed-off-by: Wu Fengguang <wfg@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-19ALSA: hda - Show missing GPIO unsol bitsTakashi Iwai
The GPIO unsolicited event bits are read but not shown in the proc file. Let's fix it. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-19ALSA: hda: make global snd_print_pcm_bits()Wu Fengguang
Introduce a global function snd_print_pcm_bits() and use it in the ELD code. Signed-off-by: Wu Fengguang <wfg@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-18ALSA: introduce snd_print_pcm_rates()Wu Fengguang
We want to share some code with print_pcm_rates(), so extract a common routine snd_print_pcm_rates() from it. Signed-off-by: Wu Fengguang <wfg@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-07Merge branch 'topic/fix/hda' into topic/hdaTakashi Iwai
2008-11-04ALSA: hda - Limit the number of GPIOs show in procTakashi Iwai
Limit the number of GPIOs shown in proc. Otherwise it gets too long unnecessarily, and hard to analyze. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-27ALSA: hda: add snd_hda_get_jack* functionsMatthew Ranostay
This patch adds snd_hda_get_jack* functions for reporting jack location, device, and connectivity type. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-13ALSA: hda - Allocate name string of each codecTakashi Iwai
Allocate dynamically the name string of each codec instead of pointing to a static string. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-09-23ALSA: HDA: hda_proc: Fix printf format specifierRobin H. Johnson
The Pincap output had a typod format specifier, leading to an extraneous "08" in the output, which is a reserved bit of the Vref field, and was really confused :-). Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: hda - print a few HDMI information in procTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-20ALSA: hda - Fix digital converter proc outputTakashi Iwai
AC_VERB_GET_DIGI_CONVERT_2 isn't actually implemented but reserved. The whole SIC bits are returned from DIGI_CONVERT_1. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-02-22[ALSA] hda-codec - Fix amp-in values for pin widgetsTakashi Iwai
Pin widgets have always one amp-input value regardless of number of connections. The proc file showed values wrongly. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-31[ALSA] hda_proc - Add a number of new settings to proc codec outputAndrew Paprocki
This patch adds additional output to the /proc codec#X info. The following pieces of information are added to the output: - Balanced, L/R swap, trigger, impedance sense pin capabilities - Vref pin capabilities - Current Vref pin widget control setting - Default configuration association, sequence, and misc bit test - EAPD/BTL bits conveying balanced mode, EAPD, and L/R swap - Power state modified to show state name as well as setting vs actual value - GPIO parameter output on Audio Function Group, including enumeration of IO pins which are indicated present (Any I and O pins are not output at this time) - Stripe and L/R swap widget capabilities - All digital converter bits: enable, validity, validity config, preemphasis, copyright, non-audio, professional, generation level, and content category - Converter stream and channel values for in/out widgets - SDI select value for in widgets - Unsolicited response widget capability tag and enabled bit - Delay widget capability value - Processing widget capability benign bit and number of coefficients - Realtek Define Registers: processing coefficient, coefficient index [Also, fixed space/tab issues and make codes a bit more readable -- Takashi] Signed-off-by: Andrew Paprocki <andrew@ishiboo.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] Remove sound/driver.hTakashi Iwai
This header file exists only for some hacks to adapt alsa-driver tree. It's useless for building in the kernel. Let's move a few lines in it to sound/core.h and remove it. With this patch, sound/driver.h isn't removed but has just a single compile warning to include it. This should be really killed in future. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-01-27 12:52:33 +0000