| Age | Commit message (Collapse) | Author |
|---|
|
When two ip_route_output_key lookups in icmp_send were combined I
forgot to change the error path for ip_options_echo to not drop the
dst reference since it now sits before the dst lookup. To fix it we
simply jump past the ip_rt_put call.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
|
|
dev->get_wireless_stats is deprecated but removing it also removes wireless
subdirectory in sysfs. This patch puts it back.
akpm: I don't know what's happening here. This might be appropriate as a
2.6.15.x compatibility backport. Waiting to hear from Jeff.
Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
|
|
Sanity check nlmsg_len during netlink_rcv_skb. An nlmsg_len == 0 can
cause infinite loop in kernel, effectively DoSing machine. Noted by
Martin Murray.
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Bart De Schuymer <bdschuym@pandora.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
|
|
The PPTP NAT helper calculates the offset at which the packet needs
to be mangled as difference between two pointers to the header. With
non-linear skbs however the pointers may point to two seperate buffers
on the stack and the calculation results in a wrong offset beeing
used.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
|
|
When an inbound PPTP_IN_CALL_REQUEST packet is received the
PPTP NAT helper uses a NULL pointer in pointer arithmentic to
calculate the offset in the packet which needs to be mangled
and corrupts random memory or crashes.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
|
|
Fixed oops after failed netlink socket creation.
Wrong parathenses in if() statement caused err to be 1,
instead of negative value.
Trivial fix, not trivial to find though.
Signed-Off-By: Dmitry Mishin <dim@sw.ru>
Signed-Off-By: Kirill Korotaev <dev@openvz.org>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
|
|
There is a regression in 2.6.15.
One of the conversions from memcmp to compare_ether_addr is incorrect.
We need to do relative comparison to determine min MAC address to
use in bridge id. This will cause the wrong bridge id to be chosen
which violates 802.1d Spanning Tree Protocol, and may create forwarding
loops.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
The below "jumbo" patch fixes the following problems in MLDv2.
1) Add necessary "ntohs" to recent "pskb_may_pull" check [breaks
all nonzero source queries on little-endian (!)]
2) Add locking to source filter list [resend of prior patch]
3) fix "mld_marksources()" to
a) send nothing when all queried sources are excluded
b) send full exclude report when source queried sources are
not excluded
c) don't schedule a timer when there's nothing to report
NOTE: RFC 3810 specifies the source list should be saved and each
source reported individually as an IS_IN. This is an obvious DOS
path, requiring the host to store and then multicast as many sources
as are queried (e.g., millions...). This alternative sends a full,
relevant report that's limited to number of sources present on the
machine.
4) fix "add_grec()" to send empty-source records when it should
The original check doesn't account for a non-empty source
list with all sources inactive; the new code keeps that
short-circuit case, and also generates the group header
with an empty list if needed.
5) fix mca_crcount decrement to be after add_grec(), which needs
its original value
These issues (other than item #1 ;-) ) were all found by Yan Zheng,
much thanks!
Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the checks are scattered all over and this leads
to inconsistencies and even cases where the check is not made.
Based upon a patch from Kris Katterjohn.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We need to release idev->lcok before we call addrconf_dad_stop().
It calls ipv6_addr_del(), which will hold idev->lock.
Bug spotted by Yasuyuki KOZAKAI <yasuyuki.kozakai@toshiba.co.jp>.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Call nf_bridge_put() before allocating a new nf_bridge structure and
potentially overwriting the pointer to a previously allocated one.
This fixes a memory leak which can occur when the bridge topology
allows for an skb to traverse more than one bridge.
Signed-off-by: David Kimdon <david.kimdon@devicescape.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The existing default of 10 is just way too low.
Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
From: Hiroyuki YAMAMORI <h-yamamo@db3.so-net.ne.jp>
Since regen_count is stored in the public address, we need to reset it
when we start renewing temporary address.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We need to relesae ifp->lock before we call addrconf_dad_stop(),
which will hold ifp->lock.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
The problem is that when new policies are inserted, sockets do not see
the update (but all new route lookups do).
This bug is related to the SA insertion stale route issue solved
recently, and this policy visibility problem can be fixed in a similar
way.
The fix is to flush out the bundles of all policies deeper than the
policy being inserted. Consider beginning state of "outgoing"
direction policy list:
policy A --> policy B --> policy C --> policy D
First, realize that inserting a policy into a list only potentially
changes IPSEC routes for that direction. Therefore we need not bother
considering the policies for other directions. We need only consider
the existing policies in the list we are doing the inserting.
Consider new policy "B'", inserted after B.
policy A --> policy B --> policy B' --> policy C --> policy D
Two rules:
1) If policy A or policy B matched before the insertion, they
appear before B' and thus would still match after inserting
B'
2) Policy C and D, now "shadowed" and after policy B', potentially
contain stale routes because policy B' might be selected
instead of them.
Therefore we only need flush routes assosciated with policies
appearing after a newly inserted policy, if any.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I hope to actually change this behaviour shortly but this will help
anybody grepping code at present.
Signed-off-by: Ian McDonald <imcdnzl@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If you add more than one IPv6 address belonging to the same prefix and
delete the address that was last added, routing table entry for that
prefix is also deleted.
Tested on 2.6.14.4
To reproduce:
ip addr add 3ffe::1/64 dev eth0
ip addr add 3ffe::2/64 dev eth0
/* wait DAD */
sleep 1
ip addr del 3ffe::2/64 dev eth0
ip -6 route
(route to 3ffe::/64 should be gone)
In ipv6_del_addr(), if ifa == ifp, we set ifa->if_next to NULL, and later
assign ifap = &ifa->if_next, effectively terminating the for-loop.
This prevents us from checking if there are other addresses using the same
prefix that are valid, and thus resulting in deletion of the prefix.
This applies only if the first entry in idev->addr_list is the address to
be deleted.
Signed-off-by: Kristian Slavov <kristian.slavov@nomadiclab.com>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In vlan_ioctl_handler() the code misses couple checks for
error return values.
Signed-off-by: Mika Kukkonen <mikukkon@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I found these while compiling with extra gcc warnings;
considering the indenting surely they are not intentional?
Signed-off-by: Mika Kukkonen <mikukkon@iki.fi>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A tentative address is not considered "assigned to an interface"
in the traditional sense (RFC2462 Section 4).
Don't try to select such an address for the source address.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
|
|
If the link was not available when the interface was created,
run DAD for pending tentative addresses when the link becomes ready.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
|
|
NETDEV_UP might be sent even if the link attached to the interface was
not ready. DAD does not make sense in such case, so we won't do so.
After interface
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
|
|
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
|
|
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
|
|
gss_create_upcall() should not error just because rpc.gssd closed the
pipe on its end. Instead, it should requeue the pending requests and then
retry.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
If we get something like the following,
[ 125.300636] [<c04086e1>] schedule_timeout+0x54/0xa5
[ 125.305931] [<c040866e>] io_schedule_timeout+0x29/0x33
[ 125.311495] [<c02880c4>] blk_congestion_wait+0x70/0x85
[ 125.317058] [<c014136b>] throttle_vm_writeout+0x69/0x7d
[ 125.322720] [<c014714d>] shrink_zone+0xe0/0xfa
[ 125.327560] [<c01471d4>] shrink_caches+0x6d/0x6f
[ 125.332581] [<c01472a6>] try_to_free_pages+0xd0/0x1b5
[ 125.338056] [<c013fa4b>] __alloc_pages+0x135/0x2e8
[ 125.343258] [<c03b74ad>] tcp_sendmsg+0xaa0/0xb78
[ 125.348281] [<c03d4666>] inet_sendmsg+0x48/0x53
[ 125.353212] [<c0388716>] sock_sendmsg+0xb8/0xd3
[ 125.358147] [<c0388773>] kernel_sendmsg+0x42/0x4f
[ 125.363259] [<c038bc00>] sock_no_sendpage+0x5e/0x77
[ 125.368556] [<c03ee7af>] xs_tcp_send_request+0x2af/0x375
then the socket is blocked until memory is reclaimed, and no
progress can ever be made.
Try to access the emergency pools by using GFP_ATOMIC.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Make sctp_writeable() use sk_wmem_alloc rather than sk_wmem_queued to
determine the sndbuf space available. It also removes all the modifications
to sk_wmem_queued as it is not currently used in SCTP.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When we insert a new xfrm_state which potentially
subsumes an existing one, make sure all cached
bundles are flushed so that the new SA is used
immediately.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The route expiration time is stored in rt6i_expires in jiffies.
The argument of rt6_route_add() for adding a route is not the
expiration time in jiffies nor in clock_t, but the lifetime
(or time left before expiration) in clock_t.
Because of the confusion, we sometimes saw several strange errors
(FAILs) in TAHI IPv6 Ready Logo Phase-2 Self Test.
The symptoms were analyzed by Mitsuru Chinen <CHINEN@jp.ibm.com>.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A typo caused some bridged IPv6 packets to get dropped randomly,
as reported by Sebastien Chaumontet. The patch below fixes this
(using skb->nh.raw instead of raw) and also makes the jumbo packet
length checking up-to-date with the code in
net/ipv6/exthdrs.c::ipv6_hop_jumbo.
Signed-off-by: Bart De Schuymer <bdschuym@pandora.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IP6_NF_TARGET_NFQUEUE depends on IP6_NF_IPTABLES, not IP_NF_IPTABLES.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As noticed by Phil Oester, the GRE NAT protocol helper is initialized
before the NAT core, which makes registration fail.
Change the linking order to make NAT be initialized first.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Receiving VLAN packets over a device (without VLAN assist) that is
doing hardware checksumming (CHECKSUM_HW), causes errors because the
VLAN code forgets to adjust the hardware checksum.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The skb_postpull_rcsum introduced a bug to the checksum modification.
Although the length pulled is offset bytes, the origin of the pulling
is the GRE header, not the IP header.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Noticed by Andi Kleen.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Noticed by Andi Kleen, it is pointless to emit the device
structure pointer in the kernel logs like this.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
*** Warning: ".wireless_send_event" [net/ieee80211/ieee80211_crypt_tkip.ko] undefined!
Signed-off-by: Olaf Hering <olh@suse.de>
net/ieee80211/Kconfig | 2 +-
1 files changed, 1 insertion(+), 1 deletion(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
|
|
|
|
When a TFTP client is SNATed so that the port is also changed, the
port is never changed back for the expected connection.
Signed-off-by: Marcus Sundberg <marcus@ingate.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Spotted by Francois Romieu, thanks!
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is a simple bug which uses the wrong member.
This bug does not seriously affect ordinary use of IPsec.
But it is important to pass IPv6 ready logo phase-2
conformance test of IPsec SGW.
Signed-off-by: Kazunori MIYAZAWA <miyazawa@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The problem I was seeing turned out to be that skb->dev is NULL when
the checksum is being completed in user context. This happens because
the reference to the device is dropped (to allow it to be released
when packets are in the queue).
Because skb->dev was NULL, the netdev_rx_csum_fault was panicing on
deref of dev->name. How about this?
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
So we can properly use __GFP_COMP and avoid the use of
PG_reserved pages.
With extremely helpful review from Hugh Dickins.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We have to store the congestion control timestamp on the SKB before we
clone it, not after. Else we get no timestamping information at all.
tcp_transmit_skb() has been reworked so that we can do the timestamp
still in one spot, instead of at all the call sites.
Problem discovered, and initial fix, from Tom Young
<tyo@ee.unimelb.edu.au>.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove unneeded call to tcp_vegas_rtt_calc. The more accurate
microsecond value has already been registered prior to calling
tcp_vegas_cong_avoid.
Signed-off-by: Thomas Young <tyo@ee.mu.oz.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move the resetting of rtt measurements to inside the once per RTT
block of code.
Signed-off-by: Thomas Young <tyo@ee.mu.oz.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
