aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2013-09-14tipc: fix lockdep warning during bearer initializationYing Xue
[ Upstream commit 4225a398c1352a7a5c14dc07277cb5cc4473983b ] When the lockdep validator is enabled, it will report the below warning when we enable a TIPC bearer: [ INFO: possible irq lock inversion dependency detected ] --------------------------------------------------------- Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(ptype_lock); local_irq_disable(); lock(tipc_net_lock); lock(ptype_lock); <Interrupt> lock(tipc_net_lock); *** DEADLOCK *** the shortest dependencies between 2nd lock and 1st lock: -> (ptype_lock){+.+...} ops: 10 { [...] SOFTIRQ-ON-W at: [<c1089418>] __lock_acquire+0x528/0x13e0 [<c108a360>] lock_acquire+0x90/0x100 [<c1553c38>] _raw_spin_lock+0x38/0x50 [<c14651ca>] dev_add_pack+0x3a/0x60 [<c182da75>] arp_init+0x1a/0x48 [<c182dce5>] inet_init+0x181/0x27e [<c1001114>] do_one_initcall+0x34/0x170 [<c17f7329>] kernel_init+0x110/0x1b2 [<c155b6a2>] kernel_thread_helper+0x6/0x10 [...] ... key at: [<c17e4b10>] ptype_lock+0x10/0x20 ... acquired at: [<c108a360>] lock_acquire+0x90/0x100 [<c1553c38>] _raw_spin_lock+0x38/0x50 [<c14651ca>] dev_add_pack+0x3a/0x60 [<c8bc18d2>] enable_bearer+0xf2/0x140 [tipc] [<c8bb283a>] tipc_enable_bearer+0x1ba/0x450 [tipc] [<c8bb3a04>] tipc_cfg_do_cmd+0x5c4/0x830 [tipc] [<c8bbc032>] handle_cmd+0x42/0xd0 [tipc] [<c148e802>] genl_rcv_msg+0x232/0x280 [<c148d3f6>] netlink_rcv_skb+0x86/0xb0 [<c148e5bc>] genl_rcv+0x1c/0x30 [<c148d144>] netlink_unicast+0x174/0x1f0 [<c148ddab>] netlink_sendmsg+0x1eb/0x2d0 [<c1456bc1>] sock_aio_write+0x161/0x170 [<c1135a7c>] do_sync_write+0xac/0xf0 [<c11360f6>] vfs_write+0x156/0x170 [<c11361e2>] sys_write+0x42/0x70 [<c155b0df>] sysenter_do_call+0x12/0x38 [...] } -> (tipc_net_lock){+..-..} ops: 4 { [...] IN-SOFTIRQ-R at: [<c108953a>] __lock_acquire+0x64a/0x13e0 [<c108a360>] lock_acquire+0x90/0x100 [<c15541cd>] _raw_read_lock_bh+0x3d/0x50 [<c8bb874d>] tipc_recv_msg+0x1d/0x830 [tipc] [<c8bc195f>] recv_msg+0x3f/0x50 [tipc] [<c146a5fa>] __netif_receive_skb+0x22a/0x590 [<c146ab0b>] netif_receive_skb+0x2b/0xf0 [<c13c43d2>] pcnet32_poll+0x292/0x780 [<c146b00a>] net_rx_action+0xfa/0x1e0 [<c103a4be>] __do_softirq+0xae/0x1e0 [...] } >From the log, we can see three different call chains between CPU0 and CPU1: Time 0 on CPU0: kernel_init()->inet_init()->dev_add_pack() At time 0, the ptype_lock is held by CPU0 in dev_add_pack(); Time 1 on CPU1: tipc_enable_bearer()->enable_bearer()->dev_add_pack() At time 1, tipc_enable_bearer() first holds tipc_net_lock, and then wants to take ptype_lock to register TIPC protocol handler into the networking stack. But the ptype_lock has been taken by dev_add_pack() on CPU0, so at this time the dev_add_pack() running on CPU1 has to be busy looping. Time 2 on CPU0: netif_receive_skb()->recv_msg()->tipc_recv_msg() At time 2, an incoming TIPC packet arrives at CPU0, hence tipc_recv_msg() will be invoked. In tipc_recv_msg(), it first wants to hold tipc_net_lock. At the moment, below scenario happens: On CPU0, below is our sequence of taking locks: lock(ptype_lock)->lock(tipc_net_lock) On CPU1, our sequence of taking locks looks like: lock(tipc_net_lock)->lock(ptype_lock) Obviously deadlock may happen in this case. But please note the deadlock possibly doesn't occur at all when the first TIPC bearer is enabled. Before enable_bearer() -- running on CPU1 does not hold ptype_lock, so the TIPC receive handler (i.e. recv_msg()) is not registered successfully via dev_add_pack(), so the tipc_recv_msg() cannot be called by recv_msg() even if a TIPC message comes to CPU0. But when the second TIPC bearer is registered, the deadlock can perhaps really happen. To fix it, we will push the work of registering TIPC protocol handler into workqueue context. After the change, both paths taking ptype_lock are always in process contexts, thus, the deadlock should never occur. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14net: ipv6: tcp: fix potential use after free in tcp_v6_do_rcvDaniel Borkmann
[ Upstream commit 3a1c756590633c0e86df606e5c618c190926a0df ] In tcp_v6_do_rcv() code, when processing pkt options, we soley work on our skb clone opt_skb that we've created earlier before entering tcp_rcv_established() on our way. However, only in condition ... if (np->rxopt.bits.rxtclass) np->rcv_tclass = ipv6_get_dsfield(ipv6_hdr(skb)); ... we work on skb itself. As we extract every other information out of opt_skb in ipv6_pktoptions path, this seems wrong, since skb can already be released by tcp_rcv_established() earlier on. When we try to access it in ipv6_hdr(), we will dereference freed skb. [ Bug added by commit 4c507d2897bd9b ("net: implement IP_RECVTOS for IP_PKTOPTIONS") ] Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14ICMPv6: treat dest unreachable codes 5 and 6 as EACCES, not EPROTOJiri Bohac
[ Upstream commit 61e76b178dbe7145e8d6afa84bb4ccea71918994 ] RFC 4443 has defined two additional codes for ICMPv6 type 1 (destination unreachable) messages: 5 - Source address failed ingress/egress policy 6 - Reject route to destination Now they are treated as protocol error and icmpv6_err_convert() converts them to EPROTO. RFC 4443 says: "Codes 5 and 6 are more informative subsets of code 1." Treat codes 5 and 6 as code 1 (EACCES) Btw, connect() returning -EPROTO confuses firefox, so that fallback to other/IPv4 addresses does not work: https://bugzilla.mozilla.org/show_bug.cgi?id=910773 Signed-off-by: Jiri Bohac <jbohac@suse.cz> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14net: bridge: convert MLDv2 Query MRC into msecs_to_jiffies for max_delayDaniel Borkmann
[ Upstream commit 2d98c29b6fb3de44d9eaa73c09f9cf7209346383 ] While looking into MLDv1/v2 code, I noticed that bridging code does not convert it's max delay into jiffies for MLDv2 messages as we do in core IPv6' multicast code. RFC3810, 5.1.3. Maximum Response Code says: The Maximum Response Code field specifies the maximum time allowed before sending a responding Report. The actual time allowed, called the Maximum Response Delay, is represented in units of milliseconds, and is derived from the Maximum Response Code as follows: [...] As we update timers that work with jiffies, we need to convert it. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Linus Lüssing <linus.luessing@web.de> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14ipv6: Don't depend on per socket memory for neighbour discovery messagesThomas Graf
[ Upstream commit 25a6e6b84fba601eff7c28d30da8ad7cfbef0d43 ] Allocating skbs when sending out neighbour discovery messages currently uses sock_alloc_send_skb() based on a per net namespace socket and thus share a socket wmem buffer space. If a netdevice is temporarily unable to transmit due to carrier loss or for other reasons, the queued up ndisc messages will cosnume all of the wmem space and will thus prevent from any more skbs to be allocated even for netdevices that are able to transmit packets. The number of neighbour discovery messages sent is very limited, use of alloc_skb() bypasses the socket wmem buffer size enforcement while the manual call to skb_set_owner_w() maintains the socket reference needed for the IPv6 output path. This patch has orginally been posted by Eric Dumazet in a modified form. Signed-off-by: Thomas Graf <tgraf@suug.ch> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Fabio Estevam <festevam@gmail.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14ipv6: drop packets with multiple fragmentation headersHannes Frederic Sowa
[ Upstream commit f46078cfcd77fa5165bf849f5e568a7ac5fa569c ] It is not allowed for an ipv6 packet to contain multiple fragmentation headers. So discard packets which were already reassembled by fragmentation logic and send back a parameter problem icmp. The updates for RFC 6980 will come in later, I have to do a bit more research here. Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14ipv6: remove max_addresses check from ipv6_create_tempaddrHannes Frederic Sowa
[ Upstream commit 4b08a8f1bd8cb4541c93ec170027b4d0782dab52 ] Because of the max_addresses check attackers were able to disable privacy extensions on an interface by creating enough autoconfigured addresses: <http://seclists.org/oss-sec/2012/q4/292> But the check is not actually needed: max_addresses protects the kernel to install too many ipv6 addresses on an interface and guards addrconf_prefix_rcv to install further addresses as soon as this limit is reached. We only generate temporary addresses in direct response of a new address showing up. As soon as we filled up the maximum number of addresses of an interface, we stop installing more addresses and thus also stop generating more temp addresses. Even if the attacker tries to generate a lot of temporary addresses by announcing a prefix and removing it again (lifetime == 0) we won't install more temp addresses, because the temporary addresses do count to the maximum number of addresses, thus we would stop installing new autoconfigured addresses when the limit is reached. This patch fixes CVE-2013-0343 (but other layer-2 attacks are still possible). Thanks to Ding Tianhong to bring this topic up again. Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Ding Tianhong <dingtianhong@huawei.com> Cc: George Kargiotakis <kargig@void.gr> Cc: P J P <ppandit@redhat.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14ipv6: don't stop backtracking in fib6_lookup_1 if subtree does not matchHannes Frederic Sowa
[ Upstream commit 3e3be275851bc6fc90bfdcd732cd95563acd982b ] In case a subtree did not match we currently stop backtracking and return NULL (root table from fib_lookup). This could yield in invalid routing table lookups when using subtrees. Instead continue to backtrack until a valid subtree or node is found and return this match. Also remove unneeded NULL check. Reported-by: Teco Boot <teco@inf-net.nl> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: David Lamparter <equinox@diac24.net> Cc: <boutier@pps.univ-paris-diderot.fr> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14tcp: cubic: fix bug in bictcp_acked()Eric Dumazet
[ Upstream commit cd6b423afd3c08b27e1fed52db828ade0addbc6b ] While investigating about strange increase of retransmit rates on hosts ~24 days after boot, Van found hystart was disabled if ca->epoch_start was 0, as following condition is true when tcp_time_stamp high order bit is set. (s32)(tcp_time_stamp - ca->epoch_start) < HZ Quoting Van : At initialization & after every loss ca->epoch_start is set to zero so I believe that the above line will turn off hystart as soon as the 2^31 bit is set in tcp_time_stamp & hystart will stay off for 24 days. I think we've observed that cubic's restart is too aggressive without hystart so this might account for the higher drop rate we observe. Diagnosed-by: Van Jacobson <vanj@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14tcp: cubic: fix overflow error in bictcp_update()Eric Dumazet
[ Upstream commit 2ed0edf9090bf4afa2c6fc4f38575a85a80d4b20 ] commit 17a6e9f1aa9 ("tcp_cubic: fix clock dependency") added an overflow error in bictcp_update() in following code : /* change the unit from HZ to bictcp_HZ */ t = ((tcp_time_stamp + msecs_to_jiffies(ca->delay_min>>3) - ca->epoch_start) << BICTCP_HZ) / HZ; Because msecs_to_jiffies() being unsigned long, compiler does implicit type promotion. We really want to constrain (tcp_time_stamp - ca->epoch_start) to a signed 32bit value, or else 't' has unexpected high values. This bugs triggers an increase of retransmit rates ~24 days after boot [1], as the high order bit of tcp_time_stamp flips. [1] for hosts with HZ=1000 Big thanks to Van Jacobson for spotting this problem. Diagnosed-by: Van Jacobson <vanj@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14fib_trie: remove potential out of bound accessEric Dumazet
[ Upstream commit aab515d7c32a34300312416c50314e755ea6f765 ] AddressSanitizer [1] dynamic checker pointed a potential out of bound access in leaf_walk_rcu() We could allocate one more slot in tnode_new() to leave the prefetch() in-place but it looks not worth the pain. Bug added in commit 82cfbb008572b ("[IPV4] fib_trie: iterator recode") [1] : https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14neighbour: populate neigh_parms on alloc before calling ndo_neigh_setupVeaceslav Falico
[ Upstream commit 63134803a6369dcf7dddf7f0d5e37b9566b308d2 ] dev->ndo_neigh_setup() might need some of the values of neigh_parms, so populate them before calling it. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14net: check net.core.somaxconn sysctl valuesRoman Gushchin
[ Upstream commit 5f671d6b4ec3e6d66c2a868738af2cdea09e7509 ] It's possible to assign an invalid value to the net.core.somaxconn sysctl variable, because there is no checks at all. The sk_max_ack_backlog field of the sock structure is defined as unsigned short. Therefore, the backlog argument in inet_listen() shouldn't exceed USHRT_MAX. The backlog argument in the listen() syscall is truncated to the somaxconn value. So, the somaxconn value shouldn't exceed 65535 (USHRT_MAX). Also, negative values of somaxconn are meaningless. before: $ sysctl -w net.core.somaxconn=256 net.core.somaxconn = 256 $ sysctl -w net.core.somaxconn=65536 net.core.somaxconn = 65536 $ sysctl -w net.core.somaxconn=-100 net.core.somaxconn = -100 after: $ sysctl -w net.core.somaxconn=256 net.core.somaxconn = 256 $ sysctl -w net.core.somaxconn=65536 error: "Invalid argument" setting key "net.core.somaxconn" $ sysctl -w net.core.somaxconn=-100 error: "Invalid argument" setting key "net.core.somaxconn" Based on a prior patch from Changli Gao. Signed-off-by: Roman Gushchin <klamm@yandex-team.ru> Reported-by: Changli Gao <xiaosuo@gmail.com> Suggested-by: Eric Dumazet <edumazet@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14htb: fix sign extension bugstephen hemminger
[ Upstream commit cbd375567f7e4811b1c721f75ec519828ac6583f ] When userspace passes a large priority value the assignment of the unsigned value hopt->prio to signed int cl->prio causes cl->prio to become negative and the comparison is with TC_HTB_NUMPRIO is always false. The result is that HTB crashes by referencing outside the array when processing packets. With this patch the large value wraps around like other values outside the normal range. See: https://bugzilla.kernel.org/show_bug.cgi?id=60669 Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-07SUNRPC: Fix memory corruption issue on 32-bit highmem systemsTrond Myklebust
commit 347e2233b7667e336d9f671f1a52dfa3f0416e2c upstream. Some architectures, such as ARM-32 do not return the same base address when you call kmap_atomic() twice on the same page. This causes problems for the memmove() call in the XDR helper routine "_shift_data_right_pages()", since it defeats the detection of overlapping memory ranges, and has been seen to corrupt memory. The fix is to distinguish between the case where we're doing an inter-page copy or not. In the former case of we know that the memory ranges cannot possibly overlap, so we can additionally micro-optimise by replacing memmove() with memcpy(). Reported-by: Mark Young <MYoung@nvidia.com> Reported-by: Matt Craighead <mcraighead@nvidia.com> Cc: Bruce Fields <bfields@fieldses.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Tested-by: Matt Craighead <mcraighead@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20af_key: initialize satype in key_notify_policy_flush()Nicolas Dichtel
commit 85dfb745ee40232876663ae206cba35f24ab2a40 upstream. This field was left uninitialized. Some user daemons perform check against this field. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Cc: Luis Henriques <luis.henriques@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11net_sched: info leak in atm_tc_dump_class()Dan Carpenter
[ Upstream commit 8cb3b9c3642c0263d48f31d525bcee7170eedc20 ] The "pvc" struct has a hole after pvc.sap_family which is not cleared. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11af_key: more info leaks in pfkey messagesDan Carpenter
[ Upstream commit ff862a4668dd6dba962b1d2d8bd344afa6375683 ] This is inspired by a5cc68f3d6 "af_key: fix info leaks in notify messages". There are some struct members which don't get initialized and could disclose small amounts of private information. Acked-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11net_sched: Fix stack info leak in cbq_dump_wrr().David S. Miller
[ Upstream commit a0db856a95a29efb1c23db55c02d9f0ff4f0db48 ] Make sure the reserved fields, and padding (if any), are fully initialized. Based upon a patch by Dan Carpenter and feedback from Joe Perches. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11ipv6: take rtnl_lock and mark mrt6 table as freed on namespace cleanupHannes Frederic Sowa
[ Upstream commit 905a6f96a1b18e490a75f810d733ced93c39b0e5 ] Otherwise we end up dereferencing the already freed net->ipv6.mrt pointer which leads to a panic (from Srivatsa S. Bhat): BUG: unable to handle kernel paging request at ffff882018552020 IP: [<ffffffffa0366b02>] ip6mr_sk_done+0x32/0xb0 [ipv6] PGD 290a067 PUD 207ffe0067 PMD 207ff1d067 PTE 8000002018552060 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC Modules linked in: ebtable_nat ebtables nfs fscache nf_conntrack_ipv4 nf_defrag_ipv4 ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables nfsd lockd nfs_acl exportfs auth_rpcgss autofs4 sunrpc 8021q garp bridge stp llc ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter +ip6_tables ipv6 vfat fat vhost_net macvtap macvlan vhost tun kvm_intel kvm uinput iTCO_wdt iTCO_vendor_support cdc_ether usbnet mii microcode i2c_i801 i2c_core lpc_ich mfd_core shpchp ioatdma dca mlx4_core be2net wmi acpi_cpufreq mperf ext4 jbd2 mbcache dm_mirror dm_region_hash dm_log dm_mod CPU: 0 PID: 7 Comm: kworker/u33:0 Not tainted 3.11.0-rc1-ea45e-a #4 Hardware name: IBM -[8737R2A]-/00Y2738, BIOS -[B2E120RUS-1.20]- 11/30/2012 Workqueue: netns cleanup_net task: ffff8810393641c0 ti: ffff881039366000 task.ti: ffff881039366000 RIP: 0010:[<ffffffffa0366b02>] [<ffffffffa0366b02>] ip6mr_sk_done+0x32/0xb0 [ipv6] RSP: 0018:ffff881039367bd8 EFLAGS: 00010286 RAX: ffff881039367fd8 RBX: ffff882018552000 RCX: dead000000200200 RDX: 0000000000000000 RSI: ffff881039367b68 RDI: ffff881039367b68 RBP: ffff881039367bf8 R08: ffff881039367b68 R09: 2222222222222222 R10: 2222222222222222 R11: 2222222222222222 R12: ffff882015a7a040 R13: ffff882014eb89c0 R14: ffff8820289e2800 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88103fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff882018552020 CR3: 0000000001c0b000 CR4: 00000000000407f0 Stack: ffff881039367c18 ffff882014eb89c0 ffff882015e28c00 0000000000000000 ffff881039367c18 ffffffffa034d9d1 ffff8820289e2800 ffff882014eb89c0 ffff881039367c58 ffffffff815bdecb ffffffff815bddf2 ffff882014eb89c0 Call Trace: [<ffffffffa034d9d1>] rawv6_close+0x21/0x40 [ipv6] [<ffffffff815bdecb>] inet_release+0xfb/0x220 [<ffffffff815bddf2>] ? inet_release+0x22/0x220 [<ffffffffa032686f>] inet6_release+0x3f/0x50 [ipv6] [<ffffffff8151c1d9>] sock_release+0x29/0xa0 [<ffffffff81525520>] sk_release_kernel+0x30/0x70 [<ffffffffa034f14b>] icmpv6_sk_exit+0x3b/0x80 [ipv6] [<ffffffff8152fff9>] ops_exit_list+0x39/0x60 [<ffffffff815306fb>] cleanup_net+0xfb/0x1a0 [<ffffffff81075e3a>] process_one_work+0x1da/0x610 [<ffffffff81075dc9>] ? process_one_work+0x169/0x610 [<ffffffff81076390>] worker_thread+0x120/0x3a0 [<ffffffff81076270>] ? process_one_work+0x610/0x610 [<ffffffff8107da2e>] kthread+0xee/0x100 [<ffffffff8107d940>] ? __init_kthread_worker+0x70/0x70 [<ffffffff8162a99c>] ret_from_fork+0x7c/0xb0 [<ffffffff8107d940>] ? __init_kthread_worker+0x70/0x70 Code: 20 48 89 5d e8 4c 89 65 f0 4c 89 6d f8 66 66 66 66 90 4c 8b 67 30 49 89 fd e8 db 3c 1e e1 49 8b 9c 24 90 08 00 00 48 85 db 74 06 <4c> 39 6b 20 74 20 bb f3 ff ff ff e8 8e 3c 1e e1 89 d8 4c 8b 65 RIP [<ffffffffa0366b02>] ip6mr_sk_done+0x32/0xb0 [ipv6] RSP <ffff881039367bd8> CR2: ffff882018552020 Reported-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Tested-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11sctp: fully initialize sctp_outq in sctp_outq_initNeil Horman
[ Upstream commit c5c7774d7eb4397891edca9ebdf750ba90977a69 ] In commit 2f94aabd9f6c925d77aecb3ff020f1cc12ed8f86 (refactor sctp_outq_teardown to insure proper re-initalization) we modified sctp_outq_teardown to use sctp_outq_init to fully re-initalize the outq structure. Steve West recently asked me why I removed the q->error = 0 initalization from sctp_outq_teardown. I did so because I was operating under the impression that sctp_outq_init would properly initalize that value for us, but it doesn't. sctp_outq_init operates under the assumption that the outq struct is all 0's (as it is when called from sctp_association_init), but using it in __sctp_outq_teardown violates that assumption. We should do a memset in sctp_outq_init to ensure that the entire structure is in a known state there instead. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: "West, Steve (NSN - US/Fort Worth)" <steve.west@nsn.com> CC: Vlad Yasevich <vyasevich@gmail.com> CC: netdev@vger.kernel.org CC: davem@davemloft.net Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11sysctl net: Keep tcp_syn_retries inside the boundaryMichal Tesar
[ Upstream commit 651e92716aaae60fc41b9652f54cb6803896e0da ] Limit the min/max value passed to the /proc/sys/net/ipv4/tcp_syn_retries. Signed-off-by: Michal Tesar <mtesar@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11mac80211: fix duplicate retransmission detectionJohannes Berg
commit 6b0f32745dcfba01d7be33acd1b40306c7a914c6 upstream. The duplicate retransmission detection code in mac80211 erroneously attempts to do the check for every frame, even frames that don't have a sequence control field or that don't use it (QoS-Null frames.) This is problematic because it causes the code to access data beyond the end of the SKB and depending on the data there will drop packets erroneously. Correct the code to not do duplicate detection for such frames. I found this error while testing AP powersave, it lead to retransmitted PS-Poll frames being dropped entirely as the data beyond the end of the SKB was always zero. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11nl80211: fix mgmt tx status and testmode reporting for netnsMichal Kazior
commit a0ec570f4f69c4cb700d743a915096c2c8f56a99 upstream. These two events were sent to the default network namespace. This caused AP mode in a non-default netns to not work correctly. Mgmt tx status was multicasted to a different (default) netns instead of the one the AP was in. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28vlan: fix a race in egress prio managementEric Dumazet
[ Upstream commit 3e3aac497513c669e1c62c71e1d552ea85c1d974 ] egress_priority_map[] hash table updates are protected by rtnl, and we never remove elements until device is dismantled. We have to make sure that before inserting an new element in hash table, all its fields are committed to memory or else another cpu could find corrupt values and crash. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-289p: fix off by one causing access violations and memory corruptionSasha Levin
[ Upstream commit 110ecd69a9feea82a152bbf9b12aba57e6396883 ] p9_release_pages() would attempt to dereference one value past the end of pages[]. This would cause the following crashes: [ 6293.171817] BUG: unable to handle kernel paging request at ffff8807c96f3000 [ 6293.174146] IP: [<ffffffff8412793b>] p9_release_pages+0x3b/0x60 [ 6293.176447] PGD 79c5067 PUD 82c1e3067 PMD 82c197067 PTE 80000007c96f3060 [ 6293.180060] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC [ 6293.180060] Modules linked in: [ 6293.180060] CPU: 62 PID: 174043 Comm: modprobe Tainted: G W 3.10.0-next-20130710-sasha #3954 [ 6293.180060] task: ffff8807b803b000 ti: ffff880787dde000 task.ti: ffff880787dde000 [ 6293.180060] RIP: 0010:[<ffffffff8412793b>] [<ffffffff8412793b>] p9_release_pages+0x3b/0x60 [ 6293.214316] RSP: 0000:ffff880787ddfc28 EFLAGS: 00010202 [ 6293.214316] RAX: 0000000000000001 RBX: ffff8807c96f2ff8 RCX: 0000000000000000 [ 6293.222017] RDX: ffff8807b803b000 RSI: 0000000000000001 RDI: ffffea001c7e3d40 [ 6293.222017] RBP: ffff880787ddfc48 R08: 0000000000000000 R09: 0000000000000000 [ 6293.222017] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000001 [ 6293.222017] R13: 0000000000000001 R14: ffff8807cc50c070 R15: ffff8807cc50c070 [ 6293.222017] FS: 00007f572641d700(0000) GS:ffff8807f3600000(0000) knlGS:0000000000000000 [ 6293.256784] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 6293.256784] CR2: ffff8807c96f3000 CR3: 00000007c8e81000 CR4: 00000000000006e0 [ 6293.256784] Stack: [ 6293.256784] ffff880787ddfcc8 ffff880787ddfcc8 0000000000000000 ffff880787ddfcc8 [ 6293.256784] ffff880787ddfd48 ffffffff84128be8 ffff880700000002 0000000000000001 [ 6293.256784] ffff8807b803b000 ffff880787ddfce0 0000100000000000 0000000000000000 [ 6293.256784] Call Trace: [ 6293.256784] [<ffffffff84128be8>] p9_virtio_zc_request+0x598/0x630 [ 6293.256784] [<ffffffff8115c610>] ? wake_up_bit+0x40/0x40 [ 6293.256784] [<ffffffff841209b1>] p9_client_zc_rpc+0x111/0x3a0 [ 6293.256784] [<ffffffff81174b78>] ? sched_clock_cpu+0x108/0x120 [ 6293.256784] [<ffffffff84122a21>] p9_client_read+0xe1/0x2c0 [ 6293.256784] [<ffffffff81708a90>] v9fs_file_read+0x90/0xc0 [ 6293.256784] [<ffffffff812bd073>] vfs_read+0xc3/0x130 [ 6293.256784] [<ffffffff811a78bd>] ? trace_hardirqs_on+0xd/0x10 [ 6293.256784] [<ffffffff812bd5a2>] SyS_read+0x62/0xa0 [ 6293.256784] [<ffffffff841a1a00>] tracesys+0xdd/0xe2 [ 6293.256784] Code: 66 90 48 89 fb 41 89 f5 48 8b 3f 48 85 ff 74 29 85 f6 74 25 45 31 e4 66 0f 1f 84 00 00 00 00 00 e8 eb 14 12 fd 41 ff c4 49 63 c4 <48> 8b 3c c3 48 85 ff 74 05 45 39 e5 75 e7 48 83 c4 08 5b 41 5c [ 6293.256784] RIP [<ffffffff8412793b>] p9_release_pages+0x3b/0x60 [ 6293.256784] RSP <ffff880787ddfc28> [ 6293.256784] CR2: ffff8807c96f3000 [ 6293.256784] ---[ end trace 50822ee72cd360fc ]--- Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28ipv6: in case of link failure remove route directly instead of letting it expireHannes Frederic Sowa
[ Upstream commit 1eb4f758286884e7566627164bca4c4a16952a83 ] We could end up expiring a route which is part of an ecmp route set. Doing so would invalidate the rt->rt6i_nsiblings calculations and could provoke the following panic: [ 80.144667] ------------[ cut here ]------------ [ 80.145172] kernel BUG at net/ipv6/ip6_fib.c:733! [ 80.145172] invalid opcode: 0000 [#1] SMP [ 80.145172] Modules linked in: 8021q nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat nf_nat_ipv4 nf_nat iptable_mangle nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables +snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_page_alloc snd_timer virtio_balloon snd soundcore i2c_piix4 i2c_core virtio_net virtio_blk [ 80.145172] CPU: 1 PID: 786 Comm: ping6 Not tainted 3.10.0+ #118 [ 80.145172] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 80.145172] task: ffff880117fa0000 ti: ffff880118770000 task.ti: ffff880118770000 [ 80.145172] RIP: 0010:[<ffffffff815f3b5d>] [<ffffffff815f3b5d>] fib6_add+0x75d/0x830 [ 80.145172] RSP: 0018:ffff880118771798 EFLAGS: 00010202 [ 80.145172] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88011350e480 [ 80.145172] RDX: ffff88011350e238 RSI: 0000000000000004 RDI: ffff88011350f738 [ 80.145172] RBP: ffff880118771848 R08: ffff880117903280 R09: 0000000000000001 [ 80.145172] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88011350f680 [ 80.145172] R13: ffff880117903280 R14: ffff880118771890 R15: ffff88011350ef90 [ 80.145172] FS: 00007f02b5127740(0000) GS:ffff88011fd00000(0000) knlGS:0000000000000000 [ 80.145172] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 80.145172] CR2: 00007f981322a000 CR3: 00000001181b1000 CR4: 00000000000006e0 [ 80.145172] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 80.145172] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 80.145172] Stack: [ 80.145172] 0000000000000001 ffff880100000000 ffff880100000000 ffff880117903280 [ 80.145172] 0000000000000000 ffff880119a4cf00 0000000000000400 00000000000007fa [ 80.145172] 0000000000000000 0000000000000000 0000000000000000 ffff88011350f680 [ 80.145172] Call Trace: [ 80.145172] [<ffffffff815eeceb>] ? rt6_bind_peer+0x4b/0x90 [ 80.145172] [<ffffffff815ed985>] __ip6_ins_rt+0x45/0x70 [ 80.145172] [<ffffffff815eee35>] ip6_ins_rt+0x35/0x40 [ 80.145172] [<ffffffff815ef1e4>] ip6_pol_route.isra.44+0x3a4/0x4b0 [ 80.145172] [<ffffffff815ef34a>] ip6_pol_route_output+0x2a/0x30 [ 80.145172] [<ffffffff81616077>] fib6_rule_action+0xd7/0x210 [ 80.145172] [<ffffffff815ef320>] ? ip6_pol_route_input+0x30/0x30 [ 80.145172] [<ffffffff81553026>] fib_rules_lookup+0xc6/0x140 [ 80.145172] [<ffffffff81616374>] fib6_rule_lookup+0x44/0x80 [ 80.145172] [<ffffffff815ef320>] ? ip6_pol_route_input+0x30/0x30 [ 80.145172] [<ffffffff815edea3>] ip6_route_output+0x73/0xb0 [ 80.145172] [<ffffffff815dfdf3>] ip6_dst_lookup_tail+0x2c3/0x2e0 [ 80.145172] [<ffffffff813007b1>] ? list_del+0x11/0x40 [ 80.145172] [<ffffffff81082a4c>] ? remove_wait_queue+0x3c/0x50 [ 80.145172] [<ffffffff815dfe4d>] ip6_dst_lookup_flow+0x3d/0xa0 [ 80.145172] [<ffffffff815fda77>] rawv6_sendmsg+0x267/0xc20 [ 80.145172] [<ffffffff815a8a83>] inet_sendmsg+0x63/0xb0 [ 80.145172] [<ffffffff8128eb93>] ? selinux_socket_sendmsg+0x23/0x30 [ 80.145172] [<ffffffff815218d6>] sock_sendmsg+0xa6/0xd0 [ 80.145172] [<ffffffff81524a68>] SYSC_sendto+0x128/0x180 [ 80.145172] [<ffffffff8109825c>] ? update_curr+0xec/0x170 [ 80.145172] [<ffffffff81041d09>] ? kvm_clock_get_cycles+0x9/0x10 [ 80.145172] [<ffffffff810afd1e>] ? __getnstimeofday+0x3e/0xd0 [ 80.145172] [<ffffffff8152509e>] SyS_sendto+0xe/0x10 [ 80.145172] [<ffffffff8164efd9>] system_call_fastpath+0x16/0x1b [ 80.145172] Code: fe ff ff 41 f6 45 2a 06 0f 85 ca fe ff ff 49 8b 7e 08 4c 89 ee e8 94 ef ff ff e9 b9 fe ff ff 48 8b 82 28 05 00 00 e9 01 ff ff ff <0f> 0b 49 8b 54 24 30 0d 00 00 40 00 89 83 14 01 00 00 48 89 53 [ 80.145172] RIP [<ffffffff815f3b5d>] fib6_add+0x75d/0x830 [ 80.145172] RSP <ffff880118771798> [ 80.387413] ---[ end trace 02f20b7a8b81ed95 ]--- [ 80.390154] Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28ipv6: ip6_append_data_mtu did not care about pmtudisc and frag_sizeHannes Frederic Sowa
[ Upstream commit 75a493e60ac4bbe2e977e7129d6d8cbb0dd236be ] If the socket had an IPV6_MTU value set, ip6_append_data_mtu lost track of this when appending the second frame on a corked socket. This results in the following splat: [37598.993962] ------------[ cut here ]------------ [37598.994008] kernel BUG at net/core/skbuff.c:2064! [37598.994008] invalid opcode: 0000 [#1] SMP [37598.994008] Modules linked in: tcp_lp uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media vfat fat usb_storage fuse ebtable_nat xt_CHECKSUM bridge stp llc ipt_MASQUERADE nf_conntrack_netbios_ns nf_conntrack_broadcast ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat +nf_nat_ipv4 nf_nat iptable_mangle nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i cxgb3 mdio libcxgbi ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi +scsi_transport_iscsi rfcomm bnep iTCO_wdt iTCO_vendor_support snd_hda_codec_conexant arc4 iwldvm mac80211 snd_hda_intel acpi_cpufreq mperf coretemp snd_hda_codec microcode cdc_wdm cdc_acm [37598.994008] snd_hwdep cdc_ether snd_seq snd_seq_device usbnet mii joydev btusb snd_pcm bluetooth i2c_i801 e1000e lpc_ich mfd_core ptp iwlwifi pps_core snd_page_alloc mei cfg80211 snd_timer thinkpad_acpi snd tpm_tis soundcore rfkill tpm tpm_bios vhost_net tun macvtap macvlan kvm_intel kvm uinput binfmt_misc +dm_crypt i915 i2c_algo_bit drm_kms_helper drm i2c_core wmi video [37598.994008] CPU 0 [37598.994008] Pid: 27320, comm: t2 Not tainted 3.9.6-200.fc18.x86_64 #1 LENOVO 27744PG/27744PG [37598.994008] RIP: 0010:[<ffffffff815443a5>] [<ffffffff815443a5>] skb_copy_and_csum_bits+0x325/0x330 [37598.994008] RSP: 0018:ffff88003670da18 EFLAGS: 00010202 [37598.994008] RAX: ffff88018105c018 RBX: 0000000000000004 RCX: 00000000000006c0 [37598.994008] RDX: ffff88018105a6c0 RSI: ffff88018105a000 RDI: ffff8801e1b0aa00 [37598.994008] RBP: ffff88003670da78 R08: 0000000000000000 R09: ffff88018105c040 [37598.994008] R10: ffff8801e1b0aa00 R11: 0000000000000000 R12: 000000000000fff8 [37598.994008] R13: 00000000000004fc R14: 00000000ffff0504 R15: 0000000000000000 [37598.994008] FS: 00007f28eea59740(0000) GS:ffff88023bc00000(0000) knlGS:0000000000000000 [37598.994008] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [37598.994008] CR2: 0000003d935789e0 CR3: 00000000365cb000 CR4: 00000000000407f0 [37598.994008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [37598.994008] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [37598.994008] Process t2 (pid: 27320, threadinfo ffff88003670c000, task ffff88022c162ee0) [37598.994008] Stack: [37598.994008] ffff88022e098a00 ffff88020f973fc0 0000000000000008 00000000000004c8 [37598.994008] ffff88020f973fc0 00000000000004c4 ffff88003670da78 ffff8801e1b0a200 [37598.994008] 0000000000000018 00000000000004c8 ffff88020f973fc0 00000000000004c4 [37598.994008] Call Trace: [37598.994008] [<ffffffff815fc21f>] ip6_append_data+0xccf/0xfe0 [37598.994008] [<ffffffff8158d9f0>] ? ip_copy_metadata+0x1a0/0x1a0 [37598.994008] [<ffffffff81661f66>] ? _raw_spin_lock_bh+0x16/0x40 [37598.994008] [<ffffffff8161548d>] udpv6_sendmsg+0x1ed/0xc10 [37598.994008] [<ffffffff812a2845>] ? sock_has_perm+0x75/0x90 [37598.994008] [<ffffffff815c3693>] inet_sendmsg+0x63/0xb0 [37598.994008] [<ffffffff812a2973>] ? selinux_socket_sendmsg+0x23/0x30 [37598.994008] [<ffffffff8153a450>] sock_sendmsg+0xb0/0xe0 [37598.994008] [<ffffffff810135d1>] ? __switch_to+0x181/0x4a0 [37598.994008] [<ffffffff8153d97d>] sys_sendto+0x12d/0x180 [37598.994008] [<ffffffff810dfb64>] ? __audit_syscall_entry+0x94/0xf0 [37598.994008] [<ffffffff81020ed1>] ? syscall_trace_enter+0x231/0x240 [37598.994008] [<ffffffff8166a7e7>] tracesys+0xdd/0xe2 [37598.994008] Code: fe 07 00 00 48 c7 c7 04 28 a6 81 89 45 a0 4c 89 4d b8 44 89 5d a8 e8 1b ac b1 ff 44 8b 5d a8 4c 8b 4d b8 8b 45 a0 e9 cf fe ff ff <0f> 0b 66 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 e5 48 [37598.994008] RIP [<ffffffff815443a5>] skb_copy_and_csum_bits+0x325/0x330 [37598.994008] RSP <ffff88003670da18> [37599.007323] ---[ end trace d69f6a17f8ac8eee ]--- While there, also check if path mtu discovery is activated for this socket. The logic was adapted from ip6_append_data when first writing on the corked socket. This bug was introduced with commit 0c1833797a5a6ec23ea9261d979aa18078720b74 ("ipv6: fix incorrect ipsec fragment"). v2: a) Replace IPV6_PMTU_DISC_DO with IPV6_PMTUDISC_PROBE. b) Don't pass ipv6_pinfo to ip6_append_data_mtu (suggestion by Gao feng, thanks!). c) Change mtu to unsigned int, else we get a warning about non-matching types because of the min()-macro type-check. Acked-by: Gao feng <gaofeng@cn.fujitsu.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28ipv6: call udp_push_pending_frames when uncorking a socket with AF_INET ↵Hannes Frederic Sowa
pending data [ Upstream commit 8822b64a0fa64a5dd1dfcf837c5b0be83f8c05d1 ] We accidentally call down to ip6_push_pending_frames when uncorking pending AF_INET data on a ipv6 socket. This results in the following splat (from Dave Jones): skbuff: skb_under_panic: text:ffffffff816765f6 len:48 put:40 head:ffff88013deb6df0 data:ffff88013deb6dec tail:0x2c end:0xc0 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:126! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: dccp_ipv4 dccp 8021q garp bridge stp dlci mpoa snd_seq_dummy sctp fuse hidp tun bnep nfnetlink scsi_transport_iscsi rfcomm can_raw can_bcm af_802154 appletalk caif_socket can caif ipt_ULOG x25 rose af_key pppoe pppox ipx phonet irda llc2 ppp_generic slhc p8023 psnap p8022 llc crc_ccitt atm bluetooth +netrom ax25 nfc rfkill rds af_rxrpc coretemp hwmon kvm_intel kvm crc32c_intel snd_hda_codec_realtek ghash_clmulni_intel microcode pcspkr snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hwdep usb_debug snd_seq snd_seq_device snd_pcm e1000e snd_page_alloc snd_timer ptp snd pps_core soundcore xfs libcrc32c CPU: 2 PID: 8095 Comm: trinity-child2 Not tainted 3.10.0-rc7+ #37 task: ffff8801f52c2520 ti: ffff8801e6430000 task.ti: ffff8801e6430000 RIP: 0010:[<ffffffff816e759c>] [<ffffffff816e759c>] skb_panic+0x63/0x65 RSP: 0018:ffff8801e6431de8 EFLAGS: 00010282 RAX: 0000000000000086 RBX: ffff8802353d3cc0 RCX: 0000000000000006 RDX: 0000000000003b90 RSI: ffff8801f52c2ca0 RDI: ffff8801f52c2520 RBP: ffff8801e6431e08 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffff88022ea0c800 R13: ffff88022ea0cdf8 R14: ffff8802353ecb40 R15: ffffffff81cc7800 FS: 00007f5720a10740(0000) GS:ffff880244c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000005862000 CR3: 000000022843c000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 Stack: ffff88013deb6dec 000000000000002c 00000000000000c0 ffffffff81a3f6e4 ffff8801e6431e18 ffffffff8159a9aa ffff8801e6431e90 ffffffff816765f6 ffffffff810b756b 0000000700000002 ffff8801e6431e40 0000fea9292aa8c0 Call Trace: [<ffffffff8159a9aa>] skb_push+0x3a/0x40 [<ffffffff816765f6>] ip6_push_pending_frames+0x1f6/0x4d0 [<ffffffff810b756b>] ? mark_held_locks+0xbb/0x140 [<ffffffff81694919>] udp_v6_push_pending_frames+0x2b9/0x3d0 [<ffffffff81694660>] ? udplite_getfrag+0x20/0x20 [<ffffffff8162092a>] udp_lib_setsockopt+0x1aa/0x1f0 [<ffffffff811cc5e7>] ? fget_light+0x387/0x4f0 [<ffffffff816958a4>] udpv6_setsockopt+0x34/0x40 [<ffffffff815949f4>] sock_common_setsockopt+0x14/0x20 [<ffffffff81593c31>] SyS_setsockopt+0x71/0xd0 [<ffffffff816f5d54>] tracesys+0xdd/0xe2 Code: 00 00 48 89 44 24 10 8b 87 d8 00 00 00 48 89 44 24 08 48 8b 87 e8 00 00 00 48 c7 c7 c0 04 aa 81 48 89 04 24 31 c0 e8 e1 7e ff ff <0f> 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55 RIP [<ffffffff816e759c>] skb_panic+0x63/0x65 RSP <ffff8801e6431de8> This patch adds a check if the pending data is of address family AF_INET and directly calls udp_push_ending_frames from udp_v6_push_pending_frames if that is the case. This bug was found by Dave Jones with trinity. (Also move the initialization of fl6 below the AF_INET check, even if not strictly necessary.) Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Dave Jones <davej@redhat.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28l2tp: add missing .owner to struct pppox_protoWei Yongjun
[ Upstream commit e1558a93b61962710733dc8c11a2bc765607f1cd ] Add missing .owner of struct pppox_proto. This prevents the module from being removed from underneath its users. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28ipv6,mcast: always hold idev->lock before mca_lockAmerigo Wang
[ Upstream commit 8965779d2c0e6ab246c82a405236b1fb2adae6b2, with some bits from commit b7b1bfce0bb68bd8f6e62a28295922785cc63781 ("ipv6: split duplicate address detection and router solicitation timer") to get the __ipv6_get_lladdr() used by this patch. ] dingtianhong reported the following deadlock detected by lockdep: ====================================================== [ INFO: possible circular locking dependency detected ] 3.4.24.05-0.1-default #1 Not tainted ------------------------------------------------------- ksoftirqd/0/3 is trying to acquire lock: (&ndev->lock){+.+...}, at: [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120 but task is already holding lock: (&mc->mca_lock){+.+...}, at: [<ffffffff8149d130>] mld_send_report+0x40/0x150 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&mc->mca_lock){+.+...}: [<ffffffff810a8027>] validate_chain+0x637/0x730 [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500 [<ffffffff810a8734>] lock_acquire+0x114/0x150 [<ffffffff814f691a>] rt_spin_lock+0x4a/0x60 [<ffffffff8149e4bb>] igmp6_group_added+0x3b/0x120 [<ffffffff8149e5d8>] ipv6_mc_up+0x38/0x60 [<ffffffff81480a4d>] ipv6_find_idev+0x3d/0x80 [<ffffffff81483175>] addrconf_notify+0x3d5/0x4b0 [<ffffffff814fae3f>] notifier_call_chain+0x3f/0x80 [<ffffffff81073471>] raw_notifier_call_chain+0x11/0x20 [<ffffffff813d8722>] call_netdevice_notifiers+0x32/0x60 [<ffffffff813d92d4>] __dev_notify_flags+0x34/0x80 [<ffffffff813d9360>] dev_change_flags+0x40/0x70 [<ffffffff813ea627>] do_setlink+0x237/0x8a0 [<ffffffff813ebb6c>] rtnl_newlink+0x3ec/0x600 [<ffffffff813eb4d0>] rtnetlink_rcv_msg+0x160/0x310 [<ffffffff814040b9>] netlink_rcv_skb+0x89/0xb0 [<ffffffff813eb357>] rtnetlink_rcv+0x27/0x40 [<ffffffff81403e20>] netlink_unicast+0x140/0x180 [<ffffffff81404a9e>] netlink_sendmsg+0x33e/0x380 [<ffffffff813c4252>] sock_sendmsg+0x112/0x130 [<ffffffff813c537e>] __sys_sendmsg+0x44e/0x460 [<ffffffff813c5544>] sys_sendmsg+0x44/0x70 [<ffffffff814feab9>] system_call_fastpath+0x16/0x1b -> #0 (&ndev->lock){+.+...}: [<ffffffff810a798e>] check_prev_add+0x3de/0x440 [<ffffffff810a8027>] validate_chain+0x637/0x730 [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500 [<ffffffff810a8734>] lock_acquire+0x114/0x150 [<ffffffff814f6c82>] rt_read_lock+0x42/0x60 [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120 [<ffffffff8149b036>] mld_newpack+0xb6/0x160 [<ffffffff8149b18b>] add_grhead+0xab/0xc0 [<ffffffff8149d03b>] add_grec+0x3ab/0x460 [<ffffffff8149d14a>] mld_send_report+0x5a/0x150 [<ffffffff8149f99e>] igmp6_timer_handler+0x4e/0xb0 [<ffffffff8105705a>] call_timer_fn+0xca/0x1d0 [<ffffffff81057b9f>] run_timer_softirq+0x1df/0x2e0 [<ffffffff8104e8c7>] handle_pending_softirqs+0xf7/0x1f0 [<ffffffff8104ea3b>] __do_softirq_common+0x7b/0xf0 [<ffffffff8104f07f>] __thread_do_softirq+0x1af/0x210 [<ffffffff8104f1c1>] run_ksoftirqd+0xe1/0x1f0 [<ffffffff8106c7de>] kthread+0xae/0xc0 [<ffffffff814fff74>] kernel_thread_helper+0x4/0x10 actually we can just hold idev->lock before taking pmc->mca_lock, and avoid taking idev->lock again when iterating idev->addr_list, since the upper callers of mld_newpack() already take read_lock_bh(&idev->lock). Reported-by: dingtianhong <dingtianhong@huawei.com> Cc: dingtianhong <dingtianhong@huawei.com> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David S. Miller <davem@davemloft.net> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Tested-by: Ding Tianhong <dingtianhong@huawei.com> Tested-by: Chen Weilong <chenweilong@huawei.com> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28x25: Fix broken locking in ioctl error paths.Dave Jones
[ Upstream commit 4ccb93ce7439b63c31bc7597bfffd13567fa483d ] Two of the x25 ioctl cases have error paths that break out of the function without unlocking the socket, leading to this warning: ================================================ [ BUG: lock held when returning to user space! ] 3.10.0-rc7+ #36 Not tainted ------------------------------------------------ trinity-child2/31407 is leaving the kernel with locks still held! 1 lock held by trinity-child2/31407: #0: (sk_lock-AF_X25){+.+.+.}, at: [<ffffffffa024b6da>] x25_ioctl+0x8a/0x740 [x25] Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28neighbour: fix a race in neigh_destroy()Eric Dumazet
[ Upstream commit c9ab4d85de222f3390c67aedc9c18a50e767531e ] There is a race in neighbour code, because neigh_destroy() uses skb_queue_purge(&neigh->arp_queue) without holding neighbour lock, while other parts of the code assume neighbour rwlock is what protects arp_queue Convert all skb_queue_purge() calls to the __skb_queue_purge() variant Use __skb_queue_head_init() instead of skb_queue_head_init() to make clear we do not use arp_queue.lock And hold neigh->lock in neigh_destroy() to close the race. Reported-by: Joe Jin <joe.jin@oracle.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28af_key: fix info leaks in notify messagesMathias Krause
[ Upstream commit a5cc68f3d63306d0d288f31edfc2ae6ef8ecd887 ] key_notify_sa_flush() and key_notify_policy_flush() miss to initialize the sadb_msg_reserved member of the broadcasted message and thereby leak 2 bytes of heap memory to listeners. Fix that. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28ipv6: ip6_sk_dst_check() must not assume ipv6 dstEric Dumazet
[ Upstream commit a963a37d384d71ad43b3e9e79d68d42fbe0901f3 ] It's possible to use AF_INET6 sockets and to connect to an IPv4 destination. After this, socket dst cache is a pointer to a rtable, not rt6_info. ip6_sk_dst_check() should check the socket dst cache is IPv6, or else various corruptions/crashes can happen. Dave Jones can reproduce immediate crash with trinity -q -l off -n -c sendmsg -c connect With help from Hannes Frederic Sowa Reported-by: Dave Jones <davej@redhat.com> Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28ipv6: don't call addrconf_dst_alloc again when enable loGao feng
[ Upstream commit a881ae1f625c599b460cc8f8a7fcb1c438f699ad ] If we disable all of the net interfaces, and enable un-lo interface before lo interface, we already allocated the addrconf dst in ipv6_add_addr. So we shouldn't allocate it again when we enable lo interface. Otherwise the message below will be triggered. unregister_netdevice: waiting for sit1 to become free. Usage count = 1 This problem is introduced by commit 25fb6ca4ed9cad72f14f61629b68dc03c0d9713f "net IPv6 : Fix broken IPv6 routing table after loopback down-up" Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28ipv4: Fixed MD5 key lookups when adding/ removing MD5 to/ from TCP sockets.Aydin Arik
[ Upstream commit c0353c7b5da4cbd2ab8227e84bbc9c79890f24ce ] MD5 key lookups on a given TCP socket were being performed incorrectly. This fix alters parameter inputs to the MD5 lookup function tcp_md5_do_lookup, which is called by functions tcp_md5_do_add and tcp_md5_do_del. Specifically, the change now inputs the correct address and address family required to make a proper lookup. Signed-off-by: Aydin Arik <aydin.arik@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28bridge: fix switched interval for MLD Query typesLinus Lüssing
[ Upstream commit 32de868cbc6bee010d2cee95b5071b25ecbec8c3 ] General Queries (the one with the Multicast Address field set to zero / '::') are supposed to have a Maximum Response Delay of [Query Response Interval], while for Multicast-Address-Specific Queries it is [Last Listener Query Interval] - not the other way round. (see RFC2710, section 7.3+7.8) Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-13libceph: Fix NULL pointer dereference in auth client codeTyler Hicks
commit 2cb33cac622afde897aa02d3dcd9fbba8bae839e upstream. A malicious monitor can craft an auth reply message that could cause a NULL function pointer dereference in the client's kernel. To prevent this, the auth_none protocol handler needs an empty ceph_auth_client_ops->build_request() function. CVE-2013-1059 Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Reported-by: Chanam Park <chanam.park@hkpco.kr> Reviewed-by: Seth Arnold <seth.arnold@canonical.com> Reviewed-by: Sage Weil <sage@inktank.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-03Bluetooth: Fix crash in l2cap_build_cmd() with small MTUAnderson Lizardo
commit 300b962e5244a1ea010df7e88595faa0085b461d upstream. If a too small MTU value is set with ioctl(HCISETACLMTU) or by a bogus controller, memory corruption happens due to a memcpy() call with negative length. Fix this crash on either incoming or outgoing connections with a MTU smaller than L2CAP_HDR_SIZE + L2CAP_CMD_HDR_SIZE: [ 46.885433] BUG: unable to handle kernel paging request at f56ad000 [ 46.888037] IP: [<c03d94cd>] memcpy+0x1d/0x40 [ 46.888037] *pdpt = 0000000000ac3001 *pde = 00000000373f8067 *pte = 80000000356ad060 [ 46.888037] Oops: 0002 [#1] SMP DEBUG_PAGEALLOC [ 46.888037] Modules linked in: hci_vhci bluetooth virtio_balloon i2c_piix4 uhci_hcd usbcore usb_common [ 46.888037] CPU: 0 PID: 1044 Comm: kworker/u3:0 Not tainted 3.10.0-rc1+ #12 [ 46.888037] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 46.888037] Workqueue: hci0 hci_rx_work [bluetooth] [ 46.888037] task: f59b15b0 ti: f55c4000 task.ti: f55c4000 [ 46.888037] EIP: 0060:[<c03d94cd>] EFLAGS: 00010212 CPU: 0 [ 46.888037] EIP is at memcpy+0x1d/0x40 [ 46.888037] EAX: f56ac1c0 EBX: fffffff8 ECX: 3ffffc6e EDX: f55c5cf2 [ 46.888037] ESI: f55c6b32 EDI: f56ad000 EBP: f55c5c68 ESP: f55c5c5c [ 46.888037] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 46.888037] CR0: 8005003b CR2: f56ad000 CR3: 3557d000 CR4: 000006f0 [ 46.888037] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 46.888037] DR6: ffff0ff0 DR7: 00000400 [ 46.888037] Stack: [ 46.888037] fffffff8 00000010 00000003 f55c5cac f8c6a54c ffffffff f8c69eb2 00000000 [ 46.888037] f4783cdc f57f0070 f759c590 1001c580 00000003 0200000a 00000000 f5a88560 [ 46.888037] f5ba2600 f5a88560 00000041 00000000 f55c5d90 f8c6f4c7 00000008 f55c5cf2 [ 46.888037] Call Trace: [ 46.888037] [<f8c6a54c>] l2cap_send_cmd+0x1cc/0x230 [bluetooth] [ 46.888037] [<f8c69eb2>] ? l2cap_global_chan_by_psm+0x152/0x1a0 [bluetooth] [ 46.888037] [<f8c6f4c7>] l2cap_connect+0x3f7/0x540 [bluetooth] [ 46.888037] [<c019b37b>] ? trace_hardirqs_off+0xb/0x10 [ 46.888037] [<c01a0ff8>] ? mark_held_locks+0x68/0x110 [ 46.888037] [<c064ad20>] ? mutex_lock_nested+0x280/0x360 [ 46.888037] [<c064b9d9>] ? __mutex_unlock_slowpath+0xa9/0x150 [ 46.888037] [<c01a118c>] ? trace_hardirqs_on_caller+0xec/0x1b0 [ 46.888037] [<c064ad08>] ? mutex_lock_nested+0x268/0x360 [ 46.888037] [<c01a125b>] ? trace_hardirqs_on+0xb/0x10 [ 46.888037] [<f8c72f8d>] l2cap_recv_frame+0xb2d/0x1d30 [bluetooth] [ 46.888037] [<c01a0ff8>] ? mark_held_locks+0x68/0x110 [ 46.888037] [<c064b9d9>] ? __mutex_unlock_slowpath+0xa9/0x150 [ 46.888037] [<c01a118c>] ? trace_hardirqs_on_caller+0xec/0x1b0 [ 46.888037] [<f8c754f1>] l2cap_recv_acldata+0x2a1/0x320 [bluetooth] [ 46.888037] [<f8c491d8>] hci_rx_work+0x518/0x810 [bluetooth] [ 46.888037] [<f8c48df2>] ? hci_rx_work+0x132/0x810 [bluetooth] [ 46.888037] [<c0158979>] process_one_work+0x1a9/0x600 [ 46.888037] [<c01588fb>] ? process_one_work+0x12b/0x600 [ 46.888037] [<c015922e>] ? worker_thread+0x19e/0x320 [ 46.888037] [<c015922e>] ? worker_thread+0x19e/0x320 [ 46.888037] [<c0159187>] worker_thread+0xf7/0x320 [ 46.888037] [<c0159090>] ? rescuer_thread+0x290/0x290 [ 46.888037] [<c01602f8>] kthread+0xa8/0xb0 [ 46.888037] [<c0656777>] ret_from_kernel_thread+0x1b/0x28 [ 46.888037] [<c0160250>] ? flush_kthread_worker+0x120/0x120 [ 46.888037] Code: c3 90 8d 74 26 00 e8 63 fc ff ff eb e8 90 55 89 e5 83 ec 0c 89 5d f4 89 75 f8 89 7d fc 3e 8d 74 26 00 89 cb 89 c7 c1 e9 02 89 d6 <f3> a5 89 d9 83 e1 03 74 02 f3 a4 8b 5d f4 8b 75 f8 8b 7d fc 89 [ 46.888037] EIP: [<c03d94cd>] memcpy+0x1d/0x40 SS:ESP 0068:f55c5c5c [ 46.888037] CR2: 00000000f56ad000 [ 46.888037] ---[ end trace 0217c1f4d78714a9 ]--- Signed-off-by: Anderson Lizardo <anderson.lizardo@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-27l2tp: Fix sendmsg() return valueGuillaume Nault
[ Upstream commit a6f79d0f26704214b5b702bbac525cb72997f984 ] PPPoL2TP sockets should comply with the standard send*() return values (i.e. return number of bytes sent instead of 0 upon success). Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-27l2tp: Fix PPP header erasure and memory leakGuillaume Nault
[ Upstream commit 55b92b7a11690bc377b5d373872a6b650ae88e64 ] Copy user data after PPP framing header. This prevents erasure of the added PPP header and avoids leaking two bytes of uninitialised memory at the end of skb's data buffer. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-27packet: packet_getname_spkt: make sure string is always 0-terminatedDaniel Borkmann
[ Upstream commit 2dc85bf323515e59e15dfa858d1472bb25cad0fe ] uaddr->sa_data is exactly of size 14, which is hard-coded here and passed as a size argument to strncpy(). A device name can be of size IFNAMSIZ (== 16), meaning we might leave the destination string unterminated. Thus, use strlcpy() and also sizeof() while we're at it. We need to memset the data area beforehand, since strlcpy does not padd the remaining buffer with zeroes for user space, so that we do not possibly leak anything. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-27net: sctp: fix NULL pointer dereference in socket destructionDaniel Borkmann
[ Upstream commit 1abd165ed757db1afdefaac0a4bc8a70f97d258c ] While stress testing sctp sockets, I hit the following panic: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: [<ffffffffa0490c4e>] sctp_endpoint_free+0xe/0x40 [sctp] PGD 7cead067 PUD 7ce76067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: sctp(F) libcrc32c(F) [...] CPU: 7 PID: 2950 Comm: acc Tainted: GF 3.10.0-rc2+ #1 Hardware name: Dell Inc. PowerEdge T410/0H19HD, BIOS 1.6.3 02/01/2011 task: ffff88007ce0e0c0 ti: ffff88007b568000 task.ti: ffff88007b568000 RIP: 0010:[<ffffffffa0490c4e>] [<ffffffffa0490c4e>] sctp_endpoint_free+0xe/0x40 [sctp] RSP: 0018:ffff88007b569e08 EFLAGS: 00010292 RAX: 0000000000000000 RBX: ffff88007db78a00 RCX: dead000000200200 RDX: ffffffffa049fdb0 RSI: ffff8800379baf38 RDI: 0000000000000000 RBP: ffff88007b569e18 R08: ffff88007c230da0 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff880077990d00 R14: 0000000000000084 R15: ffff88007db78a00 FS: 00007fc18ab61700(0000) GS:ffff88007fc60000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000020 CR3: 000000007cf9d000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff88007b569e38 ffff88007db78a00 ffff88007b569e38 ffffffffa049fded ffffffff81abf0c0 ffff88007db78a00 ffff88007b569e58 ffffffff8145b60e 0000000000000000 0000000000000000 ffff88007b569eb8 ffffffff814df36e Call Trace: [<ffffffffa049fded>] sctp_destroy_sock+0x3d/0x80 [sctp] [<ffffffff8145b60e>] sk_common_release+0x1e/0xf0 [<ffffffff814df36e>] inet_create+0x2ae/0x350 [<ffffffff81455a6f>] __sock_create+0x11f/0x240 [<ffffffff81455bf0>] sock_create+0x30/0x40 [<ffffffff8145696c>] SyS_socket+0x4c/0xc0 [<ffffffff815403be>] ? do_page_fault+0xe/0x10 [<ffffffff8153cb32>] ? page_fault+0x22/0x30 [<ffffffff81544e02>] system_call_fastpath+0x16/0x1b Code: 0c c9 c3 66 2e 0f 1f 84 00 00 00 00 00 e8 fb fe ff ff c9 c3 66 0f 1f 84 00 00 00 00 00 55 48 89 e5 53 48 83 ec 08 66 66 66 66 90 <48> 8b 47 20 48 89 fb c6 47 1c 01 c6 40 12 07 e8 9e 68 01 00 48 RIP [<ffffffffa0490c4e>] sctp_endpoint_free+0xe/0x40 [sctp] RSP <ffff88007b569e08> CR2: 0000000000000020 ---[ end trace e0d71ec1108c1dd9 ]--- I did not hit this with the lksctp-tools functional tests, but with a small, multi-threaded test program, that heavily allocates, binds, listens and waits in accept on sctp sockets, and then randomly kills some of them (no need for an actual client in this case to hit this). Then, again, allocating, binding, etc, and then killing child processes. This panic then only occurs when ``echo 1 > /proc/sys/net/sctp/auth_enable'' is set. The cause for that is actually very simple: in sctp_endpoint_init() we enter the path of sctp_auth_init_hmacs(). There, we try to allocate our crypto transforms through crypto_alloc_hash(). In our scenario, it then can happen that crypto_alloc_hash() fails with -EINTR from crypto_larval_wait(), thus we bail out and release the socket via sk_common_release(), sctp_destroy_sock() and hit the NULL pointer dereference as soon as we try to access members in the endpoint during sctp_endpoint_free(), since endpoint at that time is still NULL. Now, if we have that case, we do not need to do any cleanup work and just leave the destruction handler. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-27ipv6: assign rt6_info to inet6_ifaddr in init_loopbackGao feng
[ Upstream commit 534c877928a16ae5f9776436a497109639bf67dc ] Commit 25fb6ca4ed9cad72f14f61629b68dc03c0d9713f "net IPv6 : Fix broken IPv6 routing table after loopback down-up" forgot to assign rt6_info to the inet6_ifaddr. When disable the net device, the rt6_info which allocated in init_loopback will not be destroied in __ipv6_ifa_notify. This will trigger the waring message below [23527.916091] unregister_netdevice: waiting for tap0 to become free. Usage count = 1 Reported-by: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com> Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-27net: Block MSG_CMSG_COMPAT in send(m)msg and recv(m)msgAndy Lutomirski
[ Upstream commits 1be374a0518a288147c6a7398792583200a67261 and a7526eb5d06b0084ef12d7b168d008fcf516caab ] MSG_CMSG_COMPAT is (AFAIK) not intended to be part of the API -- it's a hack that steals a bit to indicate to other networking code that a compat entry was used. So don't allow it from a non-compat syscall. This prevents an oops when running this code: int main() { int s; struct sockaddr_in addr; struct msghdr *hdr; char *highpage = mmap((void*)(TASK_SIZE_MAX - 4096), 4096, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS | MAP_FIXED, -1, 0); if (highpage == MAP_FAILED) err(1, "mmap"); s = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP); if (s == -1) err(1, "socket"); addr.sin_family = AF_INET; addr.sin_port = htons(1); addr.sin_addr.s_addr = htonl(INADDR_LOOPBACK); if (connect(s, (struct sockaddr*)&addr, sizeof(addr)) != 0) err(1, "connect"); void *evil = highpage + 4096 - COMPAT_MSGHDR_SIZE; printf("Evil address is %p\n", evil); if (syscall(__NR_sendmmsg, s, evil, 1, MSG_CMSG_COMPAT) < 0) err(1, "sendmmsg"); return 0; } Signed-off-by: Andy Lutomirski <luto@amacapital.net> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-27ip_tunnel: fix kernel panic with icmp_dest_unreachEric Dumazet
[ Upstream commit a622260254ee481747cceaaa8609985b29a31565 ] Daniel Petre reported crashes in icmp_dst_unreach() with following call graph: Daniel found a similar problem mentioned in http://lkml.indiana.edu/hypermail/linux/kernel/1007.0/00961.html And indeed this is the root cause : skb->cb[] contains data fooling IP stack. We must clear IPCB in ip_tunnel_xmit() sooner in case dst_link_failure() is called. Or else skb->cb[] might contain garbage from GSO segmentation layer. A similar fix was tested on linux-3.9, but gre code was refactored in linux-3.10. I'll send patches for stable kernels as well. Many thanks to Daniel for providing reports, patches and testing ! Reported-by: Daniel Petre <daniel.petre@rcs-rds.ro> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-27tcp: xps: fix reordering issuesEric Dumazet
[ Upstream commit 547669d483e5783d722772af1483fa474da7caf9 ] commit 3853b5841c01a ("xps: Improvements in TX queue selection") introduced ooo_okay flag, but the condition to set it is slightly wrong. In our traces, we have seen ACK packets being received out of order, and RST packets sent in response. We should test if we have any packets still in host queue. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-27tcp: bug fix in proportional rate reduction.Nandita Dukkipati
[ Upstream commit 35f079ebbc860dcd1cca70890c9c8d59c1145525 ] This patch is a fix for a bug triggering newly_acked_sacked < 0 in tcp_ack(.). The bug is triggered by sacked_out decreasing relative to prior_sacked, but packets_out remaining the same as pior_packets. This is because the snapshot of prior_packets is taken after tcp_sacktag_write_queue() while prior_sacked is captured before tcp_sacktag_write_queue(). The problem is: tcp_sacktag_write_queue (tcp_match_skb_to_sack() -> tcp_fragment) adjusts the pcount for packets_out and sacked_out (MSS change or other reason). As a result, this delta in pcount is reflected in (prior_sacked - sacked_out) but not in (prior_packets - packets_out). This patch does the following: 1) initializes prior_packets at the start of tcp_ack() so as to capture the delta in packets_out created by tcp_fragment. 2) introduces a new "previous_packets_out" variable that snapshots packets_out right before tcp_clean_rtx_queue, so pkts_acked can be correctly computed as before. 3) Computes pkts_acked using previous_packets_out, and computes newly_acked_sacked using prior_packets. Signed-off-by: Nandita Dukkipati <nanditad@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-27netlabel: improve domain mapping validationPaul Moore
[ Upstream commit 6b21e1b77d1a3d58ebfd513264c885695e8a0ba5 ] The net/netlabel/netlabel_domainhash.c:netlbl_domhsh_add() function does not properly validate new domain hash entries resulting in potential problems when an administrator attempts to add an invalid entry. One such problem, as reported by Vlad Halilov, is a kernel BUG (found in netlabel_domainhash.c:netlbl_domhsh_audit_add()) when adding an IPv6 outbound mapping with a CIPSO configuration. This patch corrects this problem by adding the necessary validation code to netlbl_domhsh_add() via the newly created netlbl_domhsh_validate() function. Ideally this patch should also be pushed to the currently active -stable trees. Reported-by: Vlad Halilov <vlad.halilov@gmail.com> Signed-off-by: Paul Moore <pmoore@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-24 09:39:45 +0000