aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2014-06-23net: Use netlink_ns_capable to verify the permisions of netlink messagesEric W. Biederman
[ Upstream commit 90f62cf30a78721641e08737bda787552428061e ] It is possible by passing a netlink socket to a more privileged executable and then to fool that executable into writing to the socket data that happens to be valid netlink message to do something that privileged executable did not intend to do. To keep this from happening replace bare capable and ns_capable calls with netlink_capable, netlink_net_calls and netlink_ns_capable calls. Which act the same as the previous calls except they verify that the opener of the socket had the desired permissions as well. Reported-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-06-23net: Add variants of capable for use on netlink messagesEric W. Biederman
[ Upstream commit aa4cf9452f469f16cea8c96283b641b4576d4a7b ] netlink_net_capable - The common case use, for operations that are safe on a network namespace netlink_capable - For operations that are only known to be safe for the global root netlink_ns_capable - The general case of capable used to handle special cases __netlink_ns_capable - Same as netlink_ns_capable except taking a netlink_skb_parms instead of the skbuff of a netlink message. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-06-23net: Add variants of capable for use on on socketsEric W. Biederman
[ Upstream commit a3b299da869d6e78cf42ae0b1b41797bcb8c5e4b ] sk_net_capable - The common case, operations that are safe in a network namespace. sk_capable - Operations that are not known to be safe in a network namespace sk_ns_capable - The general case for special cases. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-06-23net: Move the permission check in sock_diag_put_filterinfo to packet_diag_dumpEric W. Biederman
[ Upstream commit a53b72c83a4216f2eb883ed45a0cbce014b8e62d ] The permission check in sock_diag_put_filterinfo is wrong, and it is so removed from it's sources it is not clear why it is wrong. Move the computation into packet_diag_dump and pass a bool of the result into sock_diag_filterinfo. This does not yet correct the capability check but instead simply moves it to make it clear what is going on. Reported-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-06-23netlink: Rename netlink_capable netlink_allowedEric W. Biederman
[ Upstream commit 5187cd055b6e81fc6526109456f8b20623148d5f ] netlink_capable is a static internal function in af_netlink.c and we have better uses for the name netlink_capable. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-06-23skbuff: skb_segment: orphan frags before copyingMichael S. Tsirkin
[ Upstream commit 1fd819ecb90cc9b822cd84d3056ddba315d3340f ] skb_segment copies frags around, so we need to copy them carefully to avoid accessing user memory after reporting completion to userspace through a callback. skb_segment doesn't normally happen on datapath: TSO needs to be disabled - so disabling zero copy in this case does not look like a big deal. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-06-23skbuff: skb_segment: s/fskb/list_skb/Michael S. Tsirkin
[ Upstream commit 1a4cedaf65491e66e1e55b8428c89209da729209 ] fskb is unrelated to frag: it's coming from frag_list. Rename it list_skb to avoid confusion. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-06-23skbuff: skb_segment: s/skb/head_skb/Michael S. Tsirkin
[ Upstream commit df5771ffefb13f8af5392bd54fd7e2b596a3a357 ] rename local variable to make it easier to tell at a glance that we are dealing with a head skb. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-06-23skbuff: skb_segment: s/skb_frag/frag/Michael S. Tsirkin
[ Upstream commit 4e1beba12d094c6c761ba5c49032b9b9e46380e8 ] skb_frag can in fact point at either skb or fskb so rename it generally "frag". Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-06-23skbuff: skb_segment: s/frag/nskb_frag/Michael S. Tsirkin
[ Upstream commit 8cb19905e9287a93ce7c2cbbdf742a060b00e219 ] frag points at nskb, so name it appropriately Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-06-11netfilter: ipv4: defrag: set local_df flag on defragmented skbFlorian Westphal
commit 895162b1101b3ea5db08ca6822ae9672717efec0 upstream. else we may fail to forward skb even if original fragments do fit outgoing link mtu: 1. remote sends 2k packets in two 1000 byte frags, DF set 2. we want to forward but only see '2k > mtu and DF set' 3. we then send icmp error saying that outgoing link is 1500 But original sender never sent a packet that would not fit the outgoing link. Setting local_df makes outgoing path test size vs. IPCB(skb)->frag_max_size, so we will still send the correct error in case the largest original size did not fit outgoing link mtu. Reported-by: Maxime Bizon <mbizon@freebox.fr> Suggested-by: Maxime Bizon <mbizon@freebox.fr> Fixes: 5f2d04f1f9 (ipv4: fix path MTU discovery with connection tracking) Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-06-09libceph: fix corruption when using page_count 0 page in rbdChunwei Chen
commit 178eda29ca721842f2146378e73d43e0044c4166 upstream. It has been reported that using ZFSonLinux on rbd will result in memory corruption. The bug report can be found here: https://github.com/zfsonlinux/spl/issues/241 http://tracker.ceph.com/issues/7790 The reason is that ZFS will send pages with page_count 0 into rbd, which in turns send them to tcp_sendpage. However, tcp_sendpage cannot deal with page_count 0, as it will do get_page and put_page, and erroneously free the page. This type of issue has been noted before, and handled in iscsi, drbd, etc. So, rbd should also handle this. This fix address this issue by fall back to slower sendmsg when page_count 0 detected. Cc: Sage Weil <sage@inktank.com> Cc: Yehuda Sadeh <yehuda@inktank.com> Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Ilya Dryomov <ilya.dryomov@inktank.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-06-06Bluetooth: Fix triggering BR/EDR L2CAP Connect too earlyJohan Hedberg
commit 9eb1fbfa0a737fd4d3a6d12d71c5ea9af622b887 upstream. Commit 1c2e004183178 introduced an event handler for the encryption key refresh complete event with the intent of fixing some LE/SMP cases. However, this event is shared with BR/EDR and there we actually want to act only on the auth_complete event (which comes after the key refresh). If we do not do this we may trigger an L2CAP Connect Request too early and cause the remote side to return a security block error. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-06-06mac80211: fix suspend vs. association raceEmmanuel Grumbach
commit c52666aef9f2dff39276eb53f15d99e2e229870f upstream. If the association is in progress while we suspend, the stack will be in a messed up state. Clean it before we suspend. This patch completes Johannes's patch: 1a1cb744de160ee70086a77afff605bbc275d291 Author: Johannes Berg <johannes.berg@intel.com> mac80211: fix suspend vs. authentication race Fixes: 12e7f517029d ("mac80211: cleanup generic suspend/resume procedures") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-06-06cfg80211: free sme on connection failuresEliad Peller
commit c1fbb258846dfc425507a093922d2d001e54c3ea upstream. cfg80211 is notified about connection failures by __cfg80211_connect_result() call. However, this function currently does not free cfg80211 sme. This results in hanging connection attempts in some cases e.g. when mac80211 authentication attempt is denied, we have this function call: ieee80211_rx_mgmt_auth() -> cfg80211_rx_mlme_mgmt() -> cfg80211_process_auth() -> cfg80211_sme_rx_auth() -> __cfg80211_connect_result() but cfg80211_sme_free() is never get called. Fixes: ceca7b712 ("cfg80211: separate internal SME implementation") Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-06-04netfilter: Fix potential use after free in ip6_route_me_harder()Sergey Popovich
commit a8951d5814e1373807a94f79f7ccec7041325470 upstream. Dst is released one line before we access it again with dst->error. Fixes: 58e35d147128 netfilter: ipv6: propagate routing errors from ip6_route_me_harder() Signed-off-by: Sergey Popovich <popovich_sergei@mail.ru> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-06-04mac80211: fix on-channel remain-on-channelJohannes Berg
commit b4b177a5556a686909e643f1e9b6434c10de079f upstream. Jouni reported that if a remain-on-channel was active on the same channel as the current operating channel, then the ROC would start, but any frames transmitted using mgmt-tx on the same channel would get delayed until after the ROC. The reason for this is that the ROC starts, but doesn't have any handling for "remain on the same channel", so it stops the interface queues. The later mgmt-tx then puts the frame on the interface queues (since it's on the current operating channel) and thus they get delayed until after the ROC. To fix this, add some logic to handle remaining on the same channel specially and not stop the queues etc. in this case. This not only fixes the bug but also improves behaviour in this case as data frames etc. can continue to flow. Cc: stable@vger.kernel.org Reported-by: Jouni Malinen <j@w1.fi> Tested-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-29net-gro: reset skb->truesize in napi_reuse_skb()Eric Dumazet
[ Upstream commit e33d0ba8047b049c9262fdb1fcafb93cb52ceceb ] Recycling skb always had been very tough... This time it appears GRO layer can accumulate skb->truesize adjustments made by drivers when they attach a fragment to skb. skb_gro_receive() can only subtract from skb->truesize the used part of a fragment. I spotted this problem seeing TcpExtPruneCalled and TcpExtTCPRcvCollapsed that were unexpected with a recent kernel, where TCP receive window should be sized properly to accept traffic coming from a driver not overshooting skb->truesize. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-29ipv4: initialise the itag variable in __mkroute_inputLi RongQing
[ Upstream commit fbdc0ad095c0a299e9abf5d8ac8f58374951149a ] the value of itag is a random value from stack, and may not be initiated by fib_validate_source, which called fib_combine_itag if CONFIG_IP_ROUTE_CLASSID is not set This will make the cached dst uncertainty Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-29ip_tunnel: Initialize the fallback device properlySteffen Klassert
[ Upstream commit 78ff4be45a4c51d8fb21ad92e4fabb467c6c3eeb ] We need to initialize the fallback device to have a correct mtu set on this device. Otherwise the mtu is set to null and the device is unusable. Fixes: fd58156e456d ("IPIP: Use ip-tunneling code.") Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-29batman-adv: increase orig refcount when storing ref in gw_nodeAntonio Quartulli
[ Upstream commit 377fe0f968b30a1a714fab53a908061914f30e26 ] A pointer to the orig_node representing a bat-gateway is stored in the gw_node->orig_node member, but the refcount for such orig_node is never increased. This leads to memory faults when gw_node->orig_node is accessed and the originator has already been freed. Fix this by increasing the refcount on gw_node creation and decreasing it on gw_node free. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-29rtnetlink: wait for unregistering devices in rtnl_link_unregister()Cong Wang
[ Upstream commit 200b916f3575bdf11609cb447661b8d5957b0bbf ] From: Cong Wang <cwang@twopensource.com> commit 50624c934db18ab90 (net: Delay default_device_exit_batch until no devices are unregistering) introduced rtnl_lock_unregistering() for default_device_exit_batch(). Same race could happen we when rmmod a driver which calls rtnl_link_unregister() as we call dev->destructor without rtnl lock. For long term, I think we should clean up the mess of netdev_run_todo() and net namespce exit code. Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-29ip6_tunnel: fix potential NULL pointer dereferenceSusant Sahani
[ Upstream commit c8965932a2e3b70197ec02c6741c29460279e2a8 ] The function ip6_tnl_validate assumes that the rtnl attribute IFLA_IPTUN_PROTO always be filled . If this attribute is not filled by the userspace application kernel get crashed with NULL pointer dereference. This patch fixes the potential kernel crash when IFLA_IPTUN_PROTO is missing . Signed-off-by: Susant Sahani <susant@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-29ipv4: fib_semantics: increment fib_info_cnt after fib_info allocationSergey Popovich
[ Upstream commit aeefa1ecfc799b0ea2c4979617f14cecd5cccbfd ] Increment fib_info_cnt in fib_create_info() right after successfuly alllocating fib_info structure, overwise fib_metrics allocation failure leads to fib_info_cnt incorrectly decremented in free_fib_info(), called on error path from fib_create_info(). Signed-off-by: Sergey Popovich <popovich_sergei@mail.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-29net: ipv6: send pkttoobig immediately if orig frag size > mtuFlorian Westphal
[ Upstream commit 418a31561d594a2b636c1e2fa94ecd9e1245abb1 ] If conntrack defragments incoming ipv6 frags it stores largest original frag size in ip6cb and sets ->local_df. We must thus first test the largest original frag size vs. mtu, and not vice versa. Without this patch PKTTOOBIG is still generated in ip6_fragment() later in the stack, but 1) IPSTATS_MIB_INTOOBIGERRORS won't increment 2) packet did (needlessly) traverse netfilter postrouting hook. Fixes: fe6cc55f3a9 ("net: ip, ipv6: handle gso skbs in forwarding path") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-29net: ipv4: ip_forward: fix inverted local_df testFlorian Westphal
[ Upstream commit ca6c5d4ad216d5942ae544bbf02503041bd802aa ] local_df means 'ignore DF bit if set', so if its set we're allowed to perform ip fragmentation. This wasn't noticed earlier because the output path also drops such skbs (and emits needed icmp error) and because netfilter ip defrag did not set local_df until couple of days ago. Only difference is that DF-packets-larger-than MTU now discarded earlier (f.e. we avoid pointless netfilter postrouting trip). While at it, drop the repeated test ip_exceeds_mtu, checking it once is enough... Fixes: fe6cc55f3a9 ("net: ip, ipv6: handle gso skbs in forwarding path") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-29ip_tunnel: Set network header properly for IP_ECN_decapsulate()Ying Cai
[ Upstream commit e96f2e7c430014eff52c93cabef1ad4f42ed0db1 ] In ip_tunnel_rcv(), set skb->network_header to inner IP header before IP_ECN_decapsulate(). Without the fix, IP_ECN_decapsulate() takes outer IP header as inner IP header, possibly causing error messages or packet drops. Note that this skb_reset_network_header() call was in this spot when the original feature for checking consistency of ECN bits through tunnels was added in eccc1bb8d4b4 ("tunnel: drop packet if ECN present with not-ECT"). It was only removed from this spot in 3d7b46cd20e3 ("ip_tunnel: push generic protocol handling to ip_tunnel module."). Fixes: 3d7b46cd20e3 ("ip_tunnel: push generic protocol handling to ip_tunnel module.") Reported-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Ying Cai <ycai@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-29vsock: Make transport the proto ownerAndy King
[ Upstream commit 2c4a336e0a3e203fab6aa8d8f7bb70a0ad968a6b ] Right now the core vsock module is the owner of the proto family. This means there's nothing preventing the transport module from unloading if there are open sockets, which results in a panic. Fix that by allowing the transport to be the owner, which will refcount it properly. Includes version bump to 1.0.1.0-k Passes checkpatch this time, I swear... Acked-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Andy King <acking@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-29tcp_cubic: fix the range of delayed_ackLiu Yu
[ Upstream commit 0cda345d1b2201dd15591b163e3c92bad5191745 ] commit b9f47a3aaeab (tcp_cubic: limit delayed_ack ratio to prevent divide error) try to prevent divide error, but there is still a little chance that delayed_ack can reach zero. In case the param cnt get negative value, then ratio+cnt would overflow and may happen to be zero. As a result, min(ratio, ACK_RATIO_LIMIT) will calculate to be zero. In some old kernels, such as 2.6.32, there is a bug that would pass negative param, which then ultimately leads to this divide error. commit 5b35e1e6e9c (tcp: fix tcp_trim_head() to adjust segment count with skb MSS) fixed the negative param issue. However, it's safe that we fix the range of delayed_ack as well, to make sure we do not hit a divide by zero. CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Liu Yu <allanyuliu@tencent.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-29sctp: reset flowi4_oif parameter on route lookupXufeng Zhang
[ Upstream commit 85350871317a5adb35519d9dc6fc9e80809d42ad ] commit 813b3b5db83 (ipv4: Use caller's on-stack flowi as-is in output route lookups.) introduces another regression which is very similar to the problem of commit e6b45241c (ipv4: reset flowi parameters on route connect) wants to fix: Before we call ip_route_output_key() in sctp_v4_get_dst() to get a dst that matches a bind address as the source address, we have already called this function previously and the flowi parameters have been initialized including flowi4_oif, so when we call this function again, the process in __ip_route_output_key() will be different because of the setting of flowi4_oif, and we'll get a networking device which corresponds to the inputted flowi4_oif as the output device, this is wrong because we'll never hit this place if the previously returned source address of dst match one of the bound addresses. To reproduce this problem, a vlan setting is enough: # ifconfig eth0 up # route del default # vconfig add eth0 2 # vconfig add eth0 3 # ifconfig eth0.2 10.0.1.14 netmask 255.255.255.0 # route add default gw 10.0.1.254 dev eth0.2 # ifconfig eth0.3 10.0.0.14 netmask 255.255.255.0 # ip rule add from 10.0.0.14 table 4 # ip route add table 4 default via 10.0.0.254 src 10.0.0.14 dev eth0.3 # sctp_darn -H 10.0.0.14 -P 36422 -h 10.1.4.134 -p 36422 -s -I You'll detect that all the flow are routed to eth0.2(10.0.1.254). Signed-off-by: Xufeng Zhang <xufeng.zhang@windriver.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-29bridge: Handle IFLA_ADDRESS correctly when creating bridge deviceToshiaki Makita
[ Upstream commit 30313a3d5794472c3548d7288e306a5492030370 ] When bridge device is created with IFLA_ADDRESS, we are not calling br_stp_change_bridge_id(), which leads to incorrect local fdb management and bridge id calculation, and prevents us from receiving frames on the bridge device. Reported-by: Tom Gundersen <teg@jklm.no> Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-29ipv6: fib: fix fib dump restartKumar Sundararajan
[ Upstream commit 1c2658545816088477e91860c3a645053719cb54 ] When the ipv6 fib changes during a table dump, the walk is restarted and the number of nodes dumped are skipped. But the existing code doesn't advance to the next node after a node is skipped. This can cause the dump to loop or produce lots of duplicates when the fib is modified during the dump. This change advances the walk to the next node if the current node is skipped after a restart. Signed-off-by: Kumar Sundararajan <kumar@fb.com> Signed-off-by: Chris Mason <clm@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-29rtnetlink: Only supply IFLA_VF_PORTS information when RTEXT_FILTER_VF is setDavid Gibson
[ Upstream commit c53864fd60227de025cb79e05493b13f69843971 ] Since 115c9b81928360d769a76c632bae62d15206a94a (rtnetlink: Fix problem with buffer allocation), RTM_NEWLINK messages only contain the IFLA_VFINFO_LIST attribute if they were solicited by a GETLINK message containing an IFLA_EXT_MASK attribute with the RTEXT_FILTER_VF flag. That was done because some user programs broke when they received more data than expected - because IFLA_VFINFO_LIST contains information for each VF it can become large if there are many VFs. However, the IFLA_VF_PORTS attribute, supplied for devices which implement ndo_get_vf_port (currently the 'enic' driver only), has the same problem. It supplies per-VF information and can therefore become large, but it is not currently conditional on the IFLA_EXT_MASK value. Worse, it interacts badly with the existing EXT_MASK handling. When IFLA_EXT_MASK is not supplied, the buffer for netlink replies is fixed at NLMSG_GOODSIZE. If the information for IFLA_VF_PORTS exceeds this, then rtnl_fill_ifinfo() returns -EMSGSIZE on the first message in a packet. netlink_dump() will misinterpret this as having finished the listing and omit data for this interface and all subsequent ones. That can cause getifaddrs(3) to enter an infinite loop. This patch addresses the problem by only supplying IFLA_VF_PORTS when IFLA_EXT_MASK is supplied with the RTEXT_FILTER_VF flag set. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-29rtnetlink: Warn when interface's information won't fit in our packetDavid Gibson
[ Upstream commit 973462bbde79bb827824c73b59027a0aed5c9ca6 ] Without IFLA_EXT_MASK specified, the information reported for a single interface in response to RTM_GETLINK is expected to fit within a netlink packet of NLMSG_GOODSIZE. If it doesn't, however, things will go badly wrong, When listing all interfaces, netlink_dump() will incorrectly treat -EMSGSIZE on the first message in a packet as the end of the listing and omit information for that interface and all subsequent ones. This can cause getifaddrs(3) to enter an infinite loop. This patch won't fix the problem, but it will WARN_ON() making it easier to track down what's going wrong. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-29net: Fix ns_capable check in sock_diag_put_filterinfoAndrew Lutomirski
[ Upstream commit 78541c1dc60b65ecfce5a6a096fc260219d6784e ] The caller needs capabilities on the namespace being queried, not on their own namespace. This is a security bug, although it likely has only a minor impact. Cc: stable@vger.kernel.org Signed-off-by: Andy Lutomirski <luto@amacapital.net> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-29net: sctp: cache auth_enable per endpointVlad Yasevich
[ Upstream commit b14878ccb7fac0242db82720b784ab62c467c0dc ] Currently, it is possible to create an SCTP socket, then switch auth_enable via sysctl setting to 1 and crash the system on connect: Oops[#1]: CPU: 0 PID: 0 Comm: swapper Not tainted 3.14.1-mipsgit-20140415 #1 task: ffffffff8056ce80 ti: ffffffff8055c000 task.ti: ffffffff8055c000 [...] Call Trace: [<ffffffff8043c4e8>] sctp_auth_asoc_set_default_hmac+0x68/0x80 [<ffffffff8042b300>] sctp_process_init+0x5e0/0x8a4 [<ffffffff8042188c>] sctp_sf_do_5_1B_init+0x234/0x34c [<ffffffff804228c8>] sctp_do_sm+0xb4/0x1e8 [<ffffffff80425a08>] sctp_endpoint_bh_rcv+0x1c4/0x214 [<ffffffff8043af68>] sctp_rcv+0x588/0x630 [<ffffffff8043e8e8>] sctp6_rcv+0x10/0x24 [<ffffffff803acb50>] ip6_input+0x2c0/0x440 [<ffffffff8030fc00>] __netif_receive_skb_core+0x4a8/0x564 [<ffffffff80310650>] process_backlog+0xb4/0x18c [<ffffffff80313cbc>] net_rx_action+0x12c/0x210 [<ffffffff80034254>] __do_softirq+0x17c/0x2ac [<ffffffff800345e0>] irq_exit+0x54/0xb0 [<ffffffff800075a4>] ret_from_irq+0x0/0x4 [<ffffffff800090ec>] rm7k_wait_irqoff+0x24/0x48 [<ffffffff8005e388>] cpu_startup_entry+0xc0/0x148 [<ffffffff805a88b0>] start_kernel+0x37c/0x398 Code: dd0900b8 000330f8 0126302d <dcc60000> 50c0fff1 0047182a a48306a0 03e00008 00000000 ---[ end trace b530b0551467f2fd ]--- Kernel panic - not syncing: Fatal exception in interrupt What happens while auth_enable=0 in that case is, that ep->auth_hmacs is initialized to NULL in sctp_auth_init_hmacs() when endpoint is being created. After that point, if an admin switches over to auth_enable=1, the machine can crash due to NULL pointer dereference during reception of an INIT chunk. When we enter sctp_process_init() via sctp_sf_do_5_1B_init() in order to respond to an INIT chunk, the INIT verification succeeds and while we walk and process all INIT params via sctp_process_param() we find that net->sctp.auth_enable is set, therefore do not fall through, but invoke sctp_auth_asoc_set_default_hmac() instead, and thus, dereference what we have set to NULL during endpoint initialization phase. The fix is to make auth_enable immutable by caching its value during endpoint initialization, so that its original value is being carried along until destruction. The bug seems to originate from the very first days. Fix in joint work with Daniel Borkmann. Reported-by: Joshua Kinard <kumba@gentoo.org> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Tested-by: Joshua Kinard <kumba@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-29vlan: Fix lockdep warning when vlan dev handle notificationdingtianhong
[ Upstream commit dc8eaaa006350d24030502a4521542e74b5cb39f ] When I open the LOCKDEP config and run these steps: modprobe 8021q vconfig add eth2 20 vconfig add eth2.20 30 ifconfig eth2 xx.xx.xx.xx then the Call Trace happened: [32524.386288] ============================================= [32524.386293] [ INFO: possible recursive locking detected ] [32524.386298] 3.14.0-rc2-0.7-default+ #35 Tainted: G O [32524.386302] --------------------------------------------- [32524.386306] ifconfig/3103 is trying to acquire lock: [32524.386310] (&vlan_netdev_addr_lock_key/1){+.....}, at: [<ffffffff814275f4>] dev_mc_sync+0x64/0xb0 [32524.386326] [32524.386326] but task is already holding lock: [32524.386330] (&vlan_netdev_addr_lock_key/1){+.....}, at: [<ffffffff8141af83>] dev_set_rx_mode+0x23/0x40 [32524.386341] [32524.386341] other info that might help us debug this: [32524.386345] Possible unsafe locking scenario: [32524.386345] [32524.386350] CPU0 [32524.386352] ---- [32524.386354] lock(&vlan_netdev_addr_lock_key/1); [32524.386359] lock(&vlan_netdev_addr_lock_key/1); [32524.386364] [32524.386364] *** DEADLOCK *** [32524.386364] [32524.386368] May be due to missing lock nesting notation [32524.386368] [32524.386373] 2 locks held by ifconfig/3103: [32524.386376] #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff81431d42>] rtnl_lock+0x12/0x20 [32524.386387] #1: (&vlan_netdev_addr_lock_key/1){+.....}, at: [<ffffffff8141af83>] dev_set_rx_mode+0x23/0x40 [32524.386398] [32524.386398] stack backtrace: [32524.386403] CPU: 1 PID: 3103 Comm: ifconfig Tainted: G O 3.14.0-rc2-0.7-default+ #35 [32524.386409] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [32524.386414] ffffffff81ffae40 ffff8800d9625ae8 ffffffff814f68a2 ffff8800d9625bc8 [32524.386421] ffffffff810a35fb ffff8800d8a8d9d0 00000000d9625b28 ffff8800d8a8e5d0 [32524.386428] 000003cc00000000 0000000000000002 ffff8800d8a8e5f8 0000000000000000 [32524.386435] Call Trace: [32524.386441] [<ffffffff814f68a2>] dump_stack+0x6a/0x78 [32524.386448] [<ffffffff810a35fb>] __lock_acquire+0x7ab/0x1940 [32524.386454] [<ffffffff810a323a>] ? __lock_acquire+0x3ea/0x1940 [32524.386459] [<ffffffff810a4874>] lock_acquire+0xe4/0x110 [32524.386464] [<ffffffff814275f4>] ? dev_mc_sync+0x64/0xb0 [32524.386471] [<ffffffff814fc07a>] _raw_spin_lock_nested+0x2a/0x40 [32524.386476] [<ffffffff814275f4>] ? dev_mc_sync+0x64/0xb0 [32524.386481] [<ffffffff814275f4>] dev_mc_sync+0x64/0xb0 [32524.386489] [<ffffffffa0500cab>] vlan_dev_set_rx_mode+0x2b/0x50 [8021q] [32524.386495] [<ffffffff8141addf>] __dev_set_rx_mode+0x5f/0xb0 [32524.386500] [<ffffffff8141af8b>] dev_set_rx_mode+0x2b/0x40 [32524.386506] [<ffffffff8141b3cf>] __dev_open+0xef/0x150 [32524.386511] [<ffffffff8141b177>] __dev_change_flags+0xa7/0x190 [32524.386516] [<ffffffff8141b292>] dev_change_flags+0x32/0x80 [32524.386524] [<ffffffff8149ca56>] devinet_ioctl+0x7d6/0x830 [32524.386532] [<ffffffff81437b0b>] ? dev_ioctl+0x34b/0x660 [32524.386540] [<ffffffff814a05b0>] inet_ioctl+0x80/0xa0 [32524.386550] [<ffffffff8140199d>] sock_do_ioctl+0x2d/0x60 [32524.386558] [<ffffffff81401a52>] sock_ioctl+0x82/0x2a0 [32524.386568] [<ffffffff811a7123>] do_vfs_ioctl+0x93/0x590 [32524.386578] [<ffffffff811b2705>] ? rcu_read_lock_held+0x45/0x50 [32524.386586] [<ffffffff811b39e5>] ? __fget_light+0x105/0x110 [32524.386594] [<ffffffff811a76b1>] SyS_ioctl+0x91/0xb0 [32524.386604] [<ffffffff815057e2>] system_call_fastpath+0x16/0x1b ======================================================================== The reason is that all of the addr_lock_key for vlan dev have the same class, so if we change the status for vlan dev, the vlan dev and its real dev will hold the same class of addr_lock_key together, so the warning happened. we should distinguish the lock depth for vlan dev and its real dev. v1->v2: Convert the vlan_netdev_addr_lock_key to an array of eight elements, which could support to add 8 vlan id on a same vlan dev, I think it is enough for current scene, because a netdev's name is limited to IFNAMSIZ which could not hold 8 vlan id, and the vlan dev would not meet the same class key with its real dev. The new function vlan_dev_get_lockdep_subkey() will return the subkey and make the vlan dev could get a suitable class key. v2->v3: According David's suggestion, I use the subclass to distinguish the lock key for vlan dev and its real dev, but it make no sense, because the difference for subclass in the lock_class_key doesn't mean that the difference class for lock_key, so I use lock_depth to distinguish the different depth for every vlan dev, the same depth of the vlan dev could have the same lock_class_key, I import the MAX_LOCK_DEPTH from the include/linux/sched.h, I think it is enough here, the lockdep should never exceed that value. v3->v4: Add a huge array of locking keys will waste static kernel memory and is not a appropriate method, we could use _nested() variants to fix the problem, calculate the depth for every vlan dev, and use the depth as the subclass for addr_lock_key. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-29ip6_gre: don't allow to remove the fb_tunnel_devNicolas Dichtel
[ Upstream commit 54d63f787b652755e66eb4dd8892ee6d3f5197fc ] It's possible to remove the FB tunnel with the command 'ip link del ip6gre0' but this is unsafe, the module always supposes that this device exists. For example, ip6gre_tunnel_lookup() may use it unconditionally. Let's add a rtnl handler for dellink, which will never remove the FB tunnel (we let ip6gre_destroy_tunnels() do the job). Introduced by commit c12b395a4664 ("gre: Support GRE over IPv6"). CC: Dmitry Kozlov <xeb@mail.ru> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-29filter: prevent nla extensions to peek beyond the end of the messageMathias Krause
[ Upstream commit 05ab8f2647e4221cbdb3856dd7d32bd5407316b3 ] The BPF_S_ANC_NLATTR and BPF_S_ANC_NLATTR_NEST extensions fail to check for a minimal message length before testing the supplied offset to be within the bounds of the message. This allows the subtraction of the nla header to underflow and therefore -- as the data type is unsigned -- allowing far to big offset and length values for the search of the netlink attribute. The remainder calculation for the BPF_S_ANC_NLATTR_NEST extension is also wrong. It has the minuend and subtrahend mixed up, therefore calculates a huge length value, allowing to overrun the end of the message while looking for the netlink attribute. The following three BPF snippets will trigger the bugs when attached to a UNIX datagram socket and parsing a message with length 1, 2 or 3. ,-[ PoC for missing size check in BPF_S_ANC_NLATTR ]-- | ld #0x87654321 | ldx #42 | ld #nla | ret a `--- ,-[ PoC for the same bug in BPF_S_ANC_NLATTR_NEST ]-- | ld #0x87654321 | ldx #42 | ld #nlan | ret a `--- ,-[ PoC for wrong remainder calculation in BPF_S_ANC_NLATTR_NEST ]-- | ; (needs a fake netlink header at offset 0) | ld #0 | ldx #42 | ld #nlan | ret a `--- Fix the first issue by ensuring the message length fulfills the minimal size constrains of a nla header. Fix the second bug by getting the math for the remainder calculation right. Fixes: 4738c1db15 ("[SKFILTER]: Add SKF_ADF_NLATTR instruction") Fixes: d214c7537b ("filter: add SKF_AD_NLATTR_NEST to look for nested..") Cc: Patrick McHardy <kaber@trash.net> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Mathias Krause <minipli@googlemail.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-29ipv4: return valid RTA_IIF on ip route getJulian Anastasov
[ Upstream commit 91146153da2feab18efab2e13b0945b6bb704ded ] Extend commit 13378cad02afc2adc6c0e07fca03903c7ada0b37 ("ipv4: Change rt->rt_iif encoding.") from 3.6 to return valid RTA_IIF on 'ip route get ... iif DEVICE' instead of rt_iif 0 which is displayed as 'iif *'. inet_iif is not appropriate to use because skb_iif is not set. Use the skb->dev->ifindex instead. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-29vti: don't allow to add the same tunnel twiceNicolas Dichtel
[ Upstream commit 8d89dcdf80d88007647945a753821a06eb6cc5a5 ] Before the patch, it was possible to add two times the same tunnel: ip l a vti1 type vti remote 10.16.0.121 local 10.16.0.249 key 41 ip l a vti2 type vti remote 10.16.0.121 local 10.16.0.249 key 41 It was possible, because ip_tunnel_newlink() calls ip_tunnel_find() with the argument dev->type, which was set only later (when calling ndo_init handler in register_netdevice()). Let's set this type in the setup handler, which is called before newlink handler. Introduced by commit b9959fd3b0fa ("vti: switch to new ip tunnel code"). CC: Cong Wang <amwang@redhat.com> CC: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-29gre: don't allow to add the same tunnel twiceNicolas Dichtel
[ Upstream commit 5a4552752d8f7f4cef1d98775ece7adb7616fde2 ] Before the patch, it was possible to add two times the same tunnel: ip l a gre1 type gre remote 10.16.0.121 local 10.16.0.249 ip l a gre2 type gre remote 10.16.0.121 local 10.16.0.249 It was possible, because ip_tunnel_newlink() calls ip_tunnel_find() with the argument dev->type, which was set only later (when calling ndo_init handler in register_netdevice()). Let's set this type in the setup handler, which is called before newlink handler. Introduced by commit c54419321455 ("GRE: Refactor GRE tunneling code."). CC: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-29ipv6: Limit mtu to 65575 bytesEric Dumazet
[ Upstream commit 30f78d8ebf7f514801e71b88a10c948275168518 ] Francois reported that setting big mtu on loopback device could prevent tcp sessions making progress. We do not support (yet ?) IPv6 Jumbograms and cook corrupted packets. We must limit the IPv6 MTU to (65535 + 40) bytes in theory. Tested: ifconfig lo mtu 70000 netperf -H ::1 Before patch : Throughput : 0.05 Mbits After patch : Throughput : 35484 Mbits Reported-by: Francois WELLENREITER <f.wellenreiter@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-29bridge: Fix double free and memory leak around br_allowed_ingressToshiaki Makita
[ Upstream commit eb7076182d1ae4bc4641534134ed707100d76acc ] br_allowed_ingress() has two problems. 1. If br_allowed_ingress() is called by br_handle_frame_finish() and vlan_untag() in br_allowed_ingress() fails, skb will be freed by both vlan_untag() and br_handle_frame_finish(). 2. If br_allowed_ingress() is called by br_dev_xmit() and br_allowed_ingress() fails, the skb will not be freed. Fix these two problems by freeing the skb in br_allowed_ingress() if it fails. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-29net: core: don't account for udp header size when computing seglenFlorian Westphal
[ Upstream commit 6d39d589bb76ee8a1c6cde6822006ae0053decff ] In case of tcp, gso_size contains the tcpmss. For UFO (udp fragmentation offloading) skbs, gso_size is the fragment payload size, i.e. we must not account for udp header size. Otherwise, when using virtio drivers, a to-be-forwarded UFO GSO packet will be needlessly fragmented in the forward path, because we think its individual segments are too large for the outgoing link. Fixes: fe6cc55f3a9a053 ("net: ip, ipv6: handle gso skbs in forwarding path") Cc: Eric Dumazet <eric.dumazet@gmail.com> Reported-by: Tobias Brunner <tobias@strongswan.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-29l2tp: take PMTU from tunnel UDP socketDmitry Petukhov
[ Upstream commit f34c4a35d87949fbb0e0f31eba3c054e9f8199ba ] When l2tp driver tries to get PMTU for the tunnel destination, it uses the pointer to struct sock that represents PPPoX socket, while it should use the pointer that represents UDP socket of the tunnel. Signed-off-by: Dmitry Petukhov <dmgenp@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-29net: sctp: test if association is dead in sctp_wake_up_waitersDaniel Borkmann
[ Upstream commit 1e1cdf8ac78793e0875465e98a648df64694a8d0 ] In function sctp_wake_up_waiters(), we need to involve a test if the association is declared dead. If so, we don't have any reference to a possible sibling association anymore and need to invoke sctp_write_space() instead, and normally walk the socket's associations and notify them of new wmem space. The reason for special casing is that otherwise, we could run into the following issue when a sctp_primitive_SEND() call from sctp_sendmsg() fails, and tries to flush an association's outq, i.e. in the following way: sctp_association_free() `-> list_del(&asoc->asocs) <-- poisons list pointer asoc->base.dead = true sctp_outq_free(&asoc->outqueue) `-> __sctp_outq_teardown() `-> sctp_chunk_free() `-> consume_skb() `-> sctp_wfree() `-> sctp_wake_up_waiters() <-- dereferences poisoned pointers if asoc->ep->sndbuf_policy=0 Therefore, only walk the list in an 'optimized' way if we find that the current association is still active. We could also use list_del_init() in addition when we call sctp_association_free(), but as Vlad suggests, we want to trap such bugs and thus leave it poisoned as is. Why is it safe to resolve the issue by testing for asoc->base.dead? Parallel calls to sctp_sendmsg() are protected under socket lock, that is lock_sock()/release_sock(). Only within that path under lock held, we're setting skb/chunk owner via sctp_set_owner_w(). Eventually, chunks are freed directly by an association still under that lock. So when traversing association list on destruction time from sctp_wake_up_waiters() via sctp_wfree(), a different CPU can't be running sctp_wfree() while another one calls sctp_association_free() as both happens under the same lock. Therefore, this can also not race with setting/testing against asoc->base.dead as we are guaranteed for this to happen in order, under lock. Further, Vlad says: the times we check asoc->base.dead is when we've cached an association pointer for later processing. In between cache and processing, the association may have been freed and is simply still around due to reference counts. We check asoc->base.dead under a lock, so it should always be safe to check and not race against sctp_association_free(). Stress-testing seems fine now, too. Fixes: cd253f9f357d ("net: sctp: wake up all assocs if sndbuf policy is per socket") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Vlad Yasevich <vyasevic@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-05-29net: sctp: wake up all assocs if sndbuf policy is per socketDaniel Borkmann
[ Upstream commit 52c35befb69b005c3fc5afdaae3a5717ad013411 ] SCTP charges chunks for wmem accounting via skb->truesize in sctp_set_owner_w(), and sctp_wfree() respectively as the reverse operation. If a sender runs out of wmem, it needs to wait via sctp_wait_for_sndbuf(), and gets woken up by a call to __sctp_write_space() mostly via sctp_wfree(). __sctp_write_space() is being called per association. Although we assign sk->sk_write_space() to sctp_write_space(), which is then being done per socket, it is only used if send space is increased per socket option (SO_SNDBUF), as SOCK_USE_WRITE_QUEUE is set and therefore not invoked in sock_wfree(). Commit 4c3a5bdae293 ("sctp: Don't charge for data in sndbuf again when transmitting packet") fixed an issue where in case sctp_packet_transmit() manages to queue up more than sndbuf bytes, sctp_wait_for_sndbuf() will never be woken up again unless it is interrupted by a signal. However, a still remaining issue is that if net.sctp.sndbuf_policy=0, that is accounting per socket, and one-to-many sockets are in use, the reclaimed write space from sctp_wfree() is 'unfairly' handed back on the server to the association that is the lucky one to be woken up again via __sctp_write_space(), while the remaining associations are never be woken up again (unless by a signal). The effect disappears with net.sctp.sndbuf_policy=1, that is wmem accounting per association, as it guarantees a fair share of wmem among associations. Therefore, if we have reclaimed memory in case of per socket accounting, wake all related associations to a socket in a fair manner, that is, traverse the socket association list starting from the current neighbour of the association and issue a __sctp_write_space() to everyone until we end up waking ourselves. This guarantees that no association is preferred over another and even if more associations are taken into the one-to-many session, all receivers will get messages from the server and are not stalled forever on high load. This setting still leaves the advantage of per socket accounting in touch as an association can still use up global limits if unused by others. Fixes: 4eb701dfc618 ("[SCTP] Fix SCTP sendbuffer accouting.") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Vlad Yasevich <vyasevic@redhat.com> A