aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2013-12-05Bluetooth: Add smp_sufficient_security helper functionJohan Hedberg
This function is needed both by the smp_conn_security function as well as upcoming code to check for the security requirements when receiving an L2CAP connect request over LE. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05Bluetooth: Add initial code for LE L2CAP Connect RequestJohan Hedberg
This patch adds the necessary code to send an LE L2CAP Connect Request and handle its response when user space has provided us with an LE socket with a PSM instead of a fixed CID. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05Bluetooth: Move LE L2CAP initiator procedure to its own functionJohan Hedberg
Once connection oriented L2CAP channels over LE are supported they will need a completely separate handling from BR/EDR channels. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05Bluetooth: Pass command length to LE signaling channel handlersJohan Hedberg
The LE signaling PDU length is already calculated in the l2cap_le_sig_channel function so we can just pass the value to the various handler functions to avoid unnecessary recalculations (byte order conversions). Right now the only user is the connection parameter update procedure, but as new LE signaling operations become available (for connection oriented channels) they will also be able to make use of the value. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05Bluetooth: Allow l2cap_chan_check_security() to be used for LE links.Johan Hedberg
With connection oriented L2CAP channels some code paths will be shared with BR/EDR links. It is therefore necessary to allow the l2cap_chan_check_security function to be usable also for LE links in addition to BR/EDR ones. This means that smp_conn_security() needs to be called instead of hci_conn_security() in the case of an LE link. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05Bluetooth: Update l2cap_global_chan_by_psm() to take a link typeJohan Hedberg
Once connection oriented L2CAP channels become possible for LE we need to be able to specify the link type we're interested in when looking up L2CAP channels. Therefore, add a link_type parameter to the l2cap_global_chan_by_psm() function which gets compared to the address type associated with each l2cap_chan. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05Bluetooth: Add module parameter to enable LE CoC supportJohan Hedberg
Along with the L2CAP Connection Oriented Channels features it is now allowed to use both custom fixed CIDs as well as PSM based (connection oriented connections). Since the support for this (with the subsequent patches) is still on an experimental stage, add a module parameter to enable it. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05Bluetooth: Remove unnecessary braces from one-line if-statementJohan Hedberg
This patch is just a trivial coding style fix to remove unnecessary braces from a one-line if-statement. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-04Bluetooth: Remove dead code from SMP encryption functionJohan Hedberg
The AES cipher is used in ECB mode by SMP and therefore doesn't use an IV (crypto_blkcipher_ivsize returns 0) so the code trying to set the IV was never getting called. Simply remove this code to avoid anyone from thinking it actually makes some difference. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-04Bluetooth: Remove useless smp_rand functionJohan Hedberg
This function was always just making a single get_random_bytes() call and always returning the value 0. It's simpler to just call get_random_bytes() directly where needed. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-04Bluetooth: Refactor hci_disconn_complete_evtAndre Guedes
hci_disconn_complete_evt() logic is more complicated than what it should be, making it hard to follow and add new features. So this patch does some code refactoring by handling the error cases in the beginning of the function and by moving the main flow into the first level of function scope. No change is done in the event handling logic itself. Besides organizing this messy code, this patch makes easier to add code for handling LE auto connection (which will be added in a further patch). Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-12-04Bluetooth: Remove unneeded check in hci_disconn_complete_evt()Andre Guedes
According to b644ba336 (patch that introduced HCI_CONN_MGMT_CONNECTED flag), the HCI_CONN_MGMT_CONNECTED flag tracks when mgmt has been notified about the connection. That being said, there is no point in calling mgmt_disconnect_failed() conditionally based on this flag. mgmt_disconnect_failed() removes pending MGMT_OP_DISCONNECT commands, it doesn't matter if that connection was notified or not. Moreover, if the Disconnection Complete event has status then we have nothing else to do but call mgmt_disconnect_failed() and return. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-12-04Bluetooth: Remove unnecessary 'send' parameter from smp_failure()Johan Hedberg
The send parameter has only been used for determining whether to send a Pairing Failed PDU or not. However, the function can equally well use the already existing reason parameter to make this choice and send the PDU whenever a non-zero value was passed. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-04Bluetooth: Remove link type check in hci_disconn_complete_evt()Andre Guedes
We can safely remove the link type check from hci_disconn_complete_ evt() since this check in not required for mgmt_disconnect_failed() and mgmt_device_disconnected() does it internally. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-04Bluetooth: Add an extra check in mgmt_device_disconnected()Andre Guedes
This patch adds an extra check in mgmt_device_disconnected() so we only send the "Device Disconnected" event if it is ACL_LINK or LE_LINK link type. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-04Bluetooth: Check address in mgmt_disconnect_failed()Andre Guedes
Check the address and address type in mgmt_disconnect_failed() otherwise we may wrongly fail the MGMT_OP_DISCONNECT command. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-04Bluetooth: Store supported commands only during setup procedureMarcel Holtmann
The list of supported commands of a controller can not change during its lifetime. So store the list just once during the setup procedure and not every time the HCI command is executed. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-12-04Bluetooth: Remove debug statement for features complete eventMarcel Holtmann
The complete list of local features are available through debugfs and so there is no need to add a debug print here. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-12-04Bluetooth: Set default own address type only during controller setupMarcel Holtmann
The default own address type is currently set at every power on of a controller. This overwrites the value set via debugfs. To avoid this issue, set the default own address type only during controller setup. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-12-04Bluetooth: Fix limited discoverable mode for Zeevo modulesMarcel Holtmann
There is an old Panasonic module with a Zeevo chip in there that is not really operating according to Bluetooth core specification when it comes to setting the IAC LAP for limited discoverable mode. For reference, this is the vendor information about this module: < HCI Command: Read Local Version Information (0x04|0x0001) plen 0 > HCI Event: Command Complete (0x0e) plen 12 Read Local Version Information (0x04|0x0001) ncmd 1 Status: Success (0x00) HCI version: Bluetooth 1.2 (0x02) - Revision 196 (0x00c4) LMP version: Bluetooth 1.2 (0x02) - Subversion 61 (0x003d) Manufacturer: Zeevo, Inc. (18) The module reports only the support for one IAC at a time. And that is totally acceptable according to the Bluetooth core specification since the minimum supported IAC is only one. < HCI Command: Read Number of Supported IAC (0x03|0x0038) plen 0 > HCI Event: Command Complete (0x0e) plen 5 Read Number of Supported IAC (0x03|0x0038) ncmd 1 Status: Success (0x00) Number of IAC: 1 The problem arises when trying to program two IAC into the module on a controller that only supports one. < HCI Command: Write Current IAC LAP (0x03|0x003a) plen 7 Number of IAC: 2 Access code: 0x9e8b00 (Limited Inquiry) Access code: 0x9e8b33 (General Inquiry) > HCI Event: Command Status (0x0f) plen 4 Write Current IAC LAP (0x03|0x003a) ncmd 1 Status: Unknown HCI Command (0x01) While this looks strange, but according to the Bluetooth core specification it is a legal operation. The controller has to ignore the other values and only program as many as it supports. This command shall clear any existing IACs and stores Num_Current_IAC and the IAC_LAPs in to the controller. If Num_Current_IAC is greater than Num_Support_IAC then only the first Num_Support_IAC shall be stored in the controller, and a Command Complete event with error code Success (0x00) shall be generated. This specific controller has a bug here and just returns an error. So in case the number of supported IAC is less than two and the limited discoverable mode is requested, now only the LIAC is written to the controller. < HCI Command: Write Current IAC LAP (0x03|0x003a) plen 4 Number of IAC: 1 Access code: 0x9e8b00 (Limited Inquiry) > HCI Event: Command Complete (0x0e) plen 4 Write Current IAC LAP (0x03|0x003a) ncmd 1 Status: Success (0x00) All other controllers that only support one IAC seem to handle this perfectly fine, but this fix will only write the LIAC for these controllers as well. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-12-02Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-12-02mac80211: fix rx_nss calculation for drivers with hw rcMichal Kazior
Drivers with hardware rate control were given sta->rx_nss set to 0. This was because rx_nss calculation procedure was protected by hw/sw rate control check. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-02mac80211: don't leak next beacon when csa is abortedSimon Wunderlich
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-02mac80211: don't cancel csa finalize work within stop_apSimon Wunderlich
The current channel switch code has a potential deadlock: 1) * cfg80211_stop_ap acquires wdev-lock * ieee80211_stop_ap calls cancel_work_sync for the csa_finalize_work, which acquires the associated worker-lock 2) * ieee80211_csa_finalize_work holds the worker-lock when run * it calls cfg80211_ch_switch_notify which will claim the wdev-lock, and also needs to claim the sdata-lock (which is the same as the wdev-lock) to modify the beacons. It is sufficient to just set the channel switch active to false. If the worker is running later, it will find the channel switch to not be active anymore and returns immediately without changing anything. Canceling the worker is done anyway when the interface goes down (ieee80211_do_stop). Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-02cfg80211/mac80211/ath6kl: acquire wdev lock outside ch_switch_notifySimon Wunderlich
The channel switch notification should be sent under the wdev/sdata-lock, preferably in the same moment as the channel change happens, to avoid races by other callers (e.g. start/stop_ap). This also adds the previously missing sdata_lock protection in csa_finalize_work. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-02mac80211: modify beacon using sdata/wdev-lock, not rtnl lockSimon Wunderlich
The csa finalize worker needs to change the beacon information (for different modes). These are normally protected under rtnl lock, but the csa finalize worker is called by drivers and should not acquire the RTNL lock. Therefore change access protection for beacons to sdata/wdev lock. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> [fix sdata_dereference] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-02cfg80211: protect beacon changing functions with wdev-lockSimon Wunderlich
To avoid race conditions in functions which modify the beacon information, lock these using the wdev lock. This is especially required to avoid problems for csa handling functions which modify beacons but can not be called under rtnl lock. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-02mac80211: mesh: only get tsf if we need itBob Copeland
The local TSF timer is used to compute the timing offset between mesh peers on beacon reception. However, asking the device for the TSF is not very accurate, so we prefer to use rx->mactime if available. In the latter case, calling drv_get_tsf() just adds more delay into the RX path, so skip it if we can. Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-02cfg80211: aggregate mgmt_tx parameters into a structAndrei Otcheretianski
Change cfg80211 and mac80211 to use cfg80211_mgmt_tx_params struct to aggregate parameters for mgmt_tx functions. This makes the functions' signatures less clumsy and allows less painful parameters extension. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> [fix all other drivers] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-02mac80211: update ht flag if bss configuration changedAvri Altman
There's a bug in tracking HT opmode changes in mac80211, it fails to update the driver when the channel parameters don't change. Move the code to do the HT opmode checking independently of the channel/bandwidth tracking. Signed-off-by: Avri Altman <avri.altman@intel.com> [edit commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-02mac80211: remove sta_info_flush() from interface teardownJohannes Berg
All interface types now properly clean up their stations using some form of sta_info_flush() themselves, so there's no need to try it again at teardown. Remove the call to get rid of the extra delay from the synchronize_net() and rcu_barrier() calls. Reported-by: Moshe Benji <moshe.benji@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-02mac80211: Tx frame latency statisticsMatti Gottlieb
Measure TX latency and jitter statistics per station per TID. These Measurements are disabled by default and can be enabled via debugfs. Features included for each station's TID: 1. Keep count of the maximum and average latency of Tx frames. 2. Keep track of many frames arrived in a specific time range (need to enable through debugfs and configure the bins ranges) Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-02cfg80211: fix reporting 5/10 MHz support to user spaceFelix Fietkau
nla_put_flag needs a real nl80211 attribute id, not a wiphy flag bit. While at it, split 5 and 10 MHz capability flags in case we ever need to support hardware that can only do one of the two. Also move the flag settings to the split-only information so we don't increase the space needed for old userspace. Signed-off-by: Felix Fietkau <nbd@openwrt.org> [change location of flag setting] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: minstrel_ht: do not sample unsupported ratesKarl Beldan
ATM minstrel_ht does not check whether a sampling rate is supported. Unsupported rates attempts can trigger when there are holes in bitfields of supported MCSes belonging to the same group (e.g many devices are MCS32 capable without MCS33->39 capable, also we systematically have a hole for CCK rates). Drop any attempts to sample unsupported rates, as suggested by Felix. This is not a problem in minstrel which fills a per STA sample table with only supported rates (though only at init). Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: replace print_dfs_region() with reg_dfs_region_str() helperLuis R. Rodriguez
This lets us later reuse the more generic reg_dfs_region_str(). Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: distinguish unset DFS region from unknownLuis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: intersection dfs regions when intersecting regdomainsLuis R. Rodriguez
Only allow DFS to be set if the DFS regions agree. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: use enum nl80211_dfs_regions for dfs_region everywhereLuis R. Rodriguez
u8 was used in some other places, just stick to the enum, this forces us to express the values that are expected. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: minstrels: spare numerous useless calls to get_random_bytesKarl Beldan
ATM, only the first array value returned by get_random_bytes is used. This change moves the call to get_random_bytes from the nested loop it is in to its parent. While at it, replace get_random_bytes with prandom_bytes since PRNs are way enough for the selection process. After this, minstrel_ht reclaims 80 PR-bytes instead of 640 R-bytes. minstrels use sample tables to probe different rates in a randomized manner. minstrel_ht inits one single sample table upon registration (during subsys_initcalls) and minstrel uses one per STA addition in minstrel. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: minstrel_ht: replace some occurences of MCS_GROUP_RATESKarl Beldan
Consecutive MCSes in [8*(NSS-1)->8*NSS[ have the same number NSS of streams (except for MCS32 which is mishandled ATM). ATM minstrel_ht uses MCS_GROUP_RATES in place of this 8 modulus. This change replaces such occurences and by doing so allows for different values of MCS_GROUP_RATES (e.g to cope with VHT MCS8,9). Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: add min required channel definition fieldEliad Peller
Add a new field to ieee80211_chanctx_conf to indicate the min required channel configuration. Tuning to a narrower channel might help reducing the noise level and saving some power. The min required channel definition is the max of all min required channel definitions of the interfaces bound to this channel context. In AP mode, use 20MHz when there are no connected station. When a new station is added/removed, calculate the new max bandwidth supported by any of the stations (e.g. 80MHz when 80MHz and 40MHz stations are connected). In other cases, simply use bss_conf.chandef as the min required chandef. Notify drivers about changes to this field by calling drv_change_chanctx with a new CHANGE_MIN_WIDTH notification. Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: enable easier manipulation of VHT beamforming capsEyal Shapira
Introduce shift and mask defines for beamformee STS cap and number of sounding dimensions cap as these can take any 3 bit value. While at it also cleanup an unrequired parenthesis. Signed-off-by: Eyal Shapira <eyal@wizery.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: move csa_chandef to sdataLuciano Coelho
There is no reason why we should have only one channel switch announcement at a time for a single phy. When support for channel switch with multiple contexts and multiple vifs per context is implemented, we will need the chandef data for each vif. Move the csa_chandef structure to sdata to prepare for this. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> [Fixed compilation with mesh] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: use put_unaligned_le in mesh when necessaryChun-Yeow Yeoh
Use put_unaligned_le16 and put_unaligned_le32 for mesh_path_error_tx and mesh_path_sel_frame_tx. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: use put_unaligned_le16 in mesh_plink_frame_txChun-Yeow Yeoh
Use put_unaligned_le16 in mesh_plink_frame_tx. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: add an option to disable processing country IEsLuis R. Rodriguez
Certain vendors may want to disable the processing of country IEs so that they can continue using the regulatory domain the driver or user has set. Currently there is no way to stop the core from processing country IEs, so add support to the core to ignore country IE hints. Cc: Mihir Shete <smihir@qti.qualcomm.com> Cc: Henri Bahini <hbahini@qca.qualcomm.com> Cc: Tushnim Bhattacharyya <tushnimb@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: add flags to define country IE processing rulesLuis R. Rodriguez
802.11 cards may have different country IE parsing behavioural preferences and vendors may want to support these. These preferences were managed by the REGULATORY_CUSTOM_REG and the REGULATORY_STRICT_REG flags and their combination. Instead of using this existing notation, split out the country IE behavioural preferences as a new flag. This will allow us to add more customizations easily and make the code more maintainable. Cc: Mihir Shete <smihir@qti.qualcomm.com> Cc: Henri Bahini <hbahini@qca.qualcomm.com> Cc: Tushnim Bhattacharyya <tushnimb@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [fix up conflicts] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: move regulatory flags to their own variableLuis R. Rodriguez
We'll expand this later, this will make it easier to classify and review what things are related to regulatory or not. Coccinelle only missed 4 hits, which I had to do manually, supplying the SmPL in case of merge conflicts. @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +e->regulatory_flags |= REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags & REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags |= REGULATORY_STRICT_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_STRICT_REGULATORY +e->regulatory_flags |= REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags & REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ expression e; @@ -e->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +e->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags &= ~REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags & REGULATORY_DISABLE_BEACON_HINTS Generated-by: Coccinelle SmPL Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Mihir Shete <smihir@qti.qualcomm.com> Cc: Henri Bahini <hbahini@qca.qualcomm.com> Cc: Tushnim Bhattacharyya <tushnimb@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [fix up whitespace damage, overly long lines] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: use put_unaligned_le16 for precedence value in meshChun-Yeow Yeoh
use put_unaligned_le16 for precedence value in mesh channel switch support Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: rename __set_regdom() to reg_set_rd_country_ie()Luis R. Rodriguez
This reflects that case is now completely separated. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-15 14:12:00 +0000