| Age | Commit message (Collapse) | Author |
|---|
|
[ upstream commit fc2af6c73fc9449cd5894a36bb76b8f8c0e49fd8 ]
properly
Upon reception of a MGM report packet the kernel sets the mrouters_only flag
in a skb that is a clone of the original skb, which means that the bridge
loses track of MGM packets (cb buffers are tied to a specific skb and not
shared) and it ends up forwading join requests to the bridge interface.
This can cause unexpected membership timeouts and intermitent/permanent loss
of connectivity as described in RFC 4541 [2.1.1. IGMP Forwarding Rules]:
A snooping switch should forward IGMP Membership Reports only to
those ports where multicast routers are attached.
[...]
Sending membership reports to other hosts can result, for IGMPv1
and IGMPv2, in unintentionally preventing a host from joining a
specific multicast group.
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: David S. Miller <davem@conan.davemloft.net>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
[ upstream commit 62b2bcb49cca72f6d3f39f831127a6ab315a475d ]
properly
Upon reception of a IGMP/IGMPv2 membership report the kernel sets the
mrouters_only flag in a skb that may be a clone of the original skb, which
means that sometimes the bridge loses track of membership report packets (cb
buffers are tied to a specific skb and not shared) and it ends up forwading
join requests to the bridge interface.
This can cause unexpected membership timeouts and intermitent/permanent loss
of connectivity as described in RFC 4541 [2.1.1. IGMP Forwarding Rules]:
A snooping switch should forward IGMP Membership Reports only to
those ports where multicast routers are attached.
[...]
Sending membership reports to other hosts can result, for IGMPv1
and IGMPv2, in unintentionally preventing a host from joining a
specific multicast group.
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Tested-by: Hayato Kakuta <kakuta.hayato@oss.ntt.co.jp>
Signed-off-by: David S. Miller <davem@conan.davemloft.net>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
[ upstream commit c3bccac2fa76f1619dfe4fb7b9bee69de7f066d8 ]
configured as router
Similar to accepting router advertisement, the IPv6 stack does not send router
solicitations if forwarding is enabled.
This patch enables this behavior to be overruled by setting forwarding to the
special value 2.
Signed-off-by: Thomas Graf <tgraf@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
[ upstream commit 34459512ffa7236c849466e3bd604801389734e1 ]
Unlike CCMP, the presence or absence of the QoS
field doesn't change the encryption, only the
TID is used. When no QoS field is present, zero
is used as the TID value. This means that it is
possible for an attacker to take a QoS packet
with TID 0 and replay it as a non-QoS packet.
Unfortunately, mac80211 uses different IVs for
checking the validity of the packet's TKIP IV
when it checks TID 0 and when it checks non-QoS
packets. This means it is vulnerable to this
replay attack.
To fix this, use the same replay counter for
TID 0 and non-QoS packets by overriding the
rx->queue value to 0 if it is 16 (non-QoS).
This is a minimal fix for now. I caused this
issue in
commit 1411f9b531f0a910cd1c85a337737c1e6ffbae6a
Author: Johannes Berg <johannes@sipsolutions.net>
Date: Thu Jul 10 10:11:02 2008 +0200
mac80211: fix RX sequence number check
while fixing a sequence number issue (there,
a separate counter needs to be used).
[AK: This was a non trivial backport. Johannes, John,
please double check]
Cc: stable@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
[ upstream commit b55c59892e1f3b6c7d4b9ccffb4263e1486fb990 ]
Since rpc_killall_tasks may modify the rpc_task's tk_action field
without any locking, we need to be careful when dereferencing it.
Reported-by: Ben Greear <greearb@candelatech.com>
Tested-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
[ upstream commit 676b58c27475a9defccc025fea1cbd2b141ee539 ]
A panic was observed when the device is failed to resume properly,
and there are no running interfaces. ieee80211_reconfig tries
to restart STA timers on unassociated state.
Cc: stable@kernel.org
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
[ upstream commit ec0dd267bf7d08cb30e321e45a75fd40edd7e528 ]
Because struct rpcbind_args *map was declared static, if two
threads entered this method at the same time, the values
assigned to map could be sent two two differen tasks.
This could cause all sorts of problems, include use-after-free
and double-free of memory.
Fix this by removing the static declaration so that the map
pointer is on the stack.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Cc: stable@kernel.org
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
[ upstream commit ebc63e531cc6a457595dd110b07ac530eae788c3 ]
After commit 3262c816a3d7fb1eaabce633caa317887ed549ae "[PATCH] knfsd:
split svc_serv into pools", svc_delete_xprt (then svc_delete_socket) no
longer removed its xpt_ready (then sk_ready) field from whatever list it
was on, noting that there was no point since the whole list was about to
be destroyed anyway.
That was mostly true, but forgot that a few svc_xprt_enqueue()'s might
still be hanging around playing with the about-to-be-destroyed list, and
could get themselves into trouble writing to freed memory if we left
this xprt on the list after freeing it.
(This is actually functionally identical to a patch made first by Ben
Greear, but with more comments.)
Cc: stable@kernel.org
Cc: gnb@fmeh.org
Reported-by: Ben Greear <greearb@candelatech.com>
Tested-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
[ Upstream commit 9cfaa8def1c795a512bc04f2aec333b03724ca2e ]
Consider this scenario: When the size of the first received udp packet
is bigger than the receive buffer, MSG_TRUNC bit is set in msg->msg_flags.
However, if checksum error happens and this is a blocking socket, it will
goto try_again loop to receive the next packet. But if the size of the
next udp packet is smaller than receive buffer, MSG_TRUNC flag should not
be set, but because MSG_TRUNC bit is not cleared in msg->msg_flags before
receive the next packet, MSG_TRUNC is still set, which is wrong.
Fix this problem by clearing MSG_TRUNC flag when starting over for a
new packet.
Signed-off-by: Xufeng Zhang <xufeng.zhang@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
[ Upstream commit 32c90254ed4a0c698caa0794ebb4de63fcc69631 ]
udpv6_recvmsg() function is not using the correct variable to determine
whether or not the socket is in non-blocking operation, this will lead
to unexpected behavior when a UDP checksum error occurs.
Consider a non-blocking udp receive scenario: when udpv6_recvmsg() is
called by sock_common_recvmsg(), MSG_DONTWAIT bit of flags variable in
udpv6_recvmsg() is cleared by "flags & ~MSG_DONTWAIT" in this call:
err = sk->sk_prot->recvmsg(iocb, sk, msg, size, flags & MSG_DONTWAIT,
flags & ~MSG_DONTWAIT, &addr_len);
i.e. with udpv6_recvmsg() getting these values:
int noblock = flags & MSG_DONTWAIT
int flags = flags & ~MSG_DONTWAIT
So, when udp checksum error occurs, the execution will go to
csum_copy_err, and then the problem happens:
csum_copy_err:
...............
if (flags & MSG_DONTWAIT)
return -EAGAIN;
goto try_again;
...............
But it will always go to try_again as MSG_DONTWAIT has been cleared
from flags at call time -- only noblock contains the original value
of MSG_DONTWAIT, so the test should be:
if (noblock)
return -EAGAIN;
This is also consistent with what the ipv4/udp code does.
Signed-off-by: Xufeng Zhang <xufeng.zhang@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
[ Upstream commit d0733d2e29b652b2e7b1438ececa732e4eed98eb ]
Check against mistakenly passing in IPv6 addresses (which would result
in an INADDR_ANY bind) or similar incompatible sockaddrs.
Signed-off-by: Marcus Meissner <meissner@suse.de>
Cc: Reinhard Max <max@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
[ Upstream commit 13fcb7bd322164c67926ffe272846d4860196dc6 ]
In 2.6.27, commit 393e52e33c6c2 (packet: deliver VLAN TCI to userspace)
added a small information leak.
Add padding field and make sure its zeroed before copy to user.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
CC: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
[ Upstream commit 6c4a5cb219520c7bc937ee186ca53f03733bd09f ]
A mis-configured filter can spam the logs with lots of stack traces.
Rate-limit the warnings and add printout of the bogus filter information.
Original-patch-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
[ Upstream commit eeb1497277d6b1a0a34ed36b97e18f2bd7d6de0d ]
A malicious user or buggy application can inject code and trigger an
infinite loop in inet_diag_bc_audit()
Also make sure each instruction is aligned on 4 bytes boundary, to avoid
unaligned accesses.
Reported-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
commit 5afa9133cfe67f1bfead6049a9640c9262a7101c upstream.
Fix a couple of instances where we were exiting the RPC client on
arbitrary signals. We should only do so on fatal signals.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
commit 1ed2f73d90fb49bcf5704aee7e9084adb882bfc5 upstream.
The mask indicates the bits one wants to zero out, so it needs to be
inverted before applying to the original TOS field.
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
commit 4319cc0cf5bb894b7368008cdf6dd20eb8868018 upstream.
The IPv6 header is not zeroed out in alloc_skb so we must initialize
it properly unless we want to see IPv6 packets with random TOS fields
floating around. The current implementation resets the flow label
but this could be changed if deemed necessary.
We stumbled upon this issue when trying to apply a mangle rule to
the RST packet generated by the REJECT target module.
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
commit 208c72f4fe44fe09577e7975ba0e7fa0278f3d03 upstream.
In both trigger_scan and sched_scan operations, we were checking for
the SSID length before assigning the value correctly. Since the
memory was just kzalloc'ed, the check was always failing and SSID with
over 32 characters were allowed to go through.
This was causing a buffer overflow when copying the actual SSID to the
proper place.
This bug has been there since 2.6.29-rc4.
Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
commit fe19a96b10032035a35779f42ad59e35d6dd8ffd upstream.
The TCP connection state code depends on the state_change() callback
being called when the SYN_SENT state is set. However the networking layer
doesn't actually call us back in that case.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
commit e7a46b4d0839c2a3aa2e0ae0b145f293f6738498 upstream.
It's currently exposed only through /proc which, besides requiring
screen-scraping, doesn't allow userspace to distinguish between two
identical ATM adapters with different ATM indexes. The ATM device index
is required when using PPPoATM on a system with multiple ATM adapters.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Tested-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
commit a294865978b701e4d0d90135672749531b9a900d upstream.
A length of zero (after subtracting two for the type and len fields) for
the DCCPO_{CHANGE,CONFIRM}_{L,R} options will cause an underflow due to
the subtraction. The subsequent code may read past the end of the
options value buffer when parsing. I'm unsure of what the consequences
of this might be, but it's probably not good.
Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Acked-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
commit 10022a6c66e199d8f61d9044543f38785713cbbd upstream.
v2: added space after 'if' according code style.
We can get here with a NULL socket argument passed from userspace,
so we need to handle it accordingly.
Thanks to Dave Jones pointing at this issue in net/can/bcm.c
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
[bwh: This is only applicable to 2.6.32. Phonet was fixed upstream to
work with multiple net namespaces.]
This should really fix the OOPS when doing:
unshare(CLONE_NEWNET);
exit(0);
while the phonet module is loaded.
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
commit 2fdc1c8093255f9da877d7b9ce3f46c2098377dc upstream.
When a network namespace is created (via CLONE_NEWNET), the loopback
interface is automatically added to the new namespace, triggering a
printk in ipv6_add_dev() if CONFIG_IPV6_PRIVACY is set.
This is problematic for applications which use CLONE_NEWNET as
part of a sandbox, like Chromium's suid sandbox or recent versions of
vsftpd. On a busy machine, it can lead to thousands of useless
"lo: Disabled Privacy Extensions" messages appearing in dmesg.
It's easy enough to check the status of privacy extensions via the
use_tempaddr sysctl, so just removing the printk seems like the most
sensible solution.
Signed-off-by: Romain Francoise <romain@orebokech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
commit 669502ff31d7dba1849aec7ee2450a3c61f57d39 upstream.
When reusing a TCP connection, ensure that it's aborted if a previous
shutdown attempt has been made on that connection so that the RPC over
TCP recovery mechanism succeeds.
Signed-off-by: Andy Chittenden <andyc.bluearc@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
commit c6914a6f261aca0c9f715f883a353ae7ff51fe83 upstream.
We can get here with a NULL socket argument passed from userspace,
so we need to handle it accordingly.
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
[ upstream commit 65e9b62d4503849b10bedfc29bff0473760cc597 ]
The current IPv6 behavior is to not accept router advertisements while
forwarding, i.e. configured as router.
This does make sense, a router is typically not supposed to be auto
configured. However there are exceptions and we should allow the
current behavior to be overwritten.
Therefore this patch enables the user to overrule the "if forwarding
enabled then don't listen to RAs" rule by setting accept_ra to the
special value of 2.
An alternative would be to ignore the forwarding switch alltogether
and solely accept RAs based on the value of accept_ra. However, I
found that if not intended, accepting RAs as a router can lead to
strange unwanted behavior therefore we it seems wise to only do so
if the user explicitely asks for this behavior.
Signed-off-by: Thomas Graf <tgraf@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
Also please revert the patch "fix-cred-leak-in-af_netlink" from 2.6.35.12.
The proper fix was "af_netlink-add-needed-scm_destroy-after-scm_send" which
was also added in that release. Here's a revert patch:
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
commit 5b919f833d9d60588d026ad82d17f17e8872c7a9 upstream.
Commit fe10ae53384e48c51996941b7720ee16995cbcb7 adds a memset() to clear
the structure being sent back to userspace, but accidentally used the
wrong size.
Reported-by: Brad Spengler <spender@grsecurity.net>
Signed-off-by: Kees Cook <kees.cook@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
commit 1b1f693d7ad6d193862dcb1118540a030c5e761f upstream.
As reported by Thomas Pollet, the rdma page counting can overflow. We
get the rdma sizes in 64-bit unsigned entities, but then limit it to
UINT_MAX bytes and shift them down to pages (so with a possible "+1" for
an unaligned address).
So each individual page count fits comfortably in an 'unsigned int' (not
even close to overflowing into signed), but as they are added up, they
might end up resulting in a signed return value. Which would be wrong.
Catch the case of tot_pages turning negative, and return the appropriate
error code.
Reported-by: Thomas Pollet <thomas.pollet@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andy Grover <andy.grover@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
[v2: nr is unsigned in the old code]
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Acked-by: Tim Gardner <tim.gardner@canonical.com>
Acked-by: Brad Figg <brad.figg@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
commit 9f260e0efa4766e56d0ac14f1aeea6ee5eb8fe83 upstream.
Since the socket address is just being used as a unique identifier, its
inode number is an alternative that does not leak potentially sensitive
information.
CC-ing stable because MITRE has assigned CVE-2010-4565 to the issue.
Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
commit fdac1e0697356ac212259f2147aa60c72e334861 upstream.
If the user-provided len is less than the expected offset, the
IRLMP_ENUMDEVICES getsockopt will do a copy_to_user() with a very large
size value. While this isn't be a security issue on x86 because it will
get caught by the access_ok() check, it may leak large amounts of kernel
heap on other architectures. In any event, this patch fixes it.
Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
commit 22e76c849d505d87c5ecf3d3e6742a65f0ff4860 upstream.
We were using nlmsg_find_attr() to look up the bytecode by attribute when
auditing, but then just using the first attribute when actually running
bytecode. So, if we received a message with two attribute elements, where only
the second had type INET_DIAG_REQ_BYTECODE, we would validate and run different
bytecode strings.
Fix this by consistently using nlmsg_find_attr everywhere.
[AK: Add const to nlmsg_find_attr to fix new warning]
Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Signed-off-by: Thomas Graf <tgraf@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
[jmm: Slightly adapted to apply against 2.6.32]
Cc: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
commit 88f8a5e3e7defccd3925cabb1ee4d3994e5cdb52 upstream.
Structure sockaddr_tipc is copied to userland with padding bytes after
"id" field in union field "name" unitialized. It leads to leaking of
contents of kernel stack memory. We have to initialize them to zero.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
commit 6d152e23ad1a7a5b40fef1f42e017d66e6115159 upstream.
Like Herbert's change from a few days ago:
66c46d741e2e60f0e8b625b80edb0ab820c46d7a gro: Reset dev pointer on reuse
this may not be necessary at this point, but we should still clean up
the skb->skb_iif. If not we may end up with an invalid valid for
skb->skb_iif when the skb is reused and the check is done in
__netif_receive_skb.
Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
commit 66c46d741e2e60f0e8b625b80edb0ab820c46d7a upstream.
On older kernels the VLAN code may zero skb->dev before dropping
it and causing it to be reused by GRO.
Unfortunately we didn't reset skb->dev in that case which causes
the next GRO user to get a bogus skb->dev pointer.
This particular problem no longer happens with the current upstream
kernel due to changes in VLAN processing.
However, for correctness we should still reset the skb->dev pointer
in the GRO reuse function in case a future user does the same thing.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
commit 67c5c6cb8129c595f21e88254a3fc6b3b841ae8e upstream.
struct aunhdr has 4 padding bytes between 'pad' and 'handle' fields on
x86_64. These bytes are not initialized in the variable 'ah' before
sending 'ah' to the network. This leads to 4 bytes kernel stack
infoleak.
This bug was introduced before the git epoch.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: Phil Blundell <philb@gnu.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
commit 6a8ab060779779de8aea92ce3337ca348f973f54 upstream.
Structures ip6t_replace, compat_ip6t_replace, and xt_get_revision are
copied from userspace. Fields of these structs that are
zero-terminated strings are not checked. When they are used as argument
to a format string containing "%s" in request_module(), some sensitive
information is leaked to userspace via argument of spawned modprobe
process.
The first bug was introduced before the git epoch; the second was
introduced in 3bc3fe5e (v2.6.25-rc1); the third is introduced by
6b7d31fc (v2.6.15-rc1). To trigger the bug one should have
CAP_NET_ADMIN.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
commit 961ed183a9fd080cf306c659b8736007e44065a5 upstream.
'buffer' string is copied from userspace. It is not checked whether it is
zero terminated. This may lead to overflow inside of simple_strtoul().
Changli Gao suggested to copy not more than user supplied 'size' bytes.
It was introduced before the git epoch. Files "ipt_CLUSTERIP/*" are
root writable only by default, however, on some setups permissions might be
relaxed to e.g. network admin user.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
commit 42eab94fff18cb1091d3501cd284d6bd6cc9c143 upstream.
Structures ipt_replace, compat_ipt_replace, and xt_get_revision are
copied from userspace. Fields of these structs that are
zero-terminated strings are not checked. When they are used as argument
to a format string containing "%s" in request_module(), some sensitive
information is leaked to userspace via argument of spawned modprobe
process.
The first bug was introduced before the git epoch; the second is
introduced by 6b7d31fc (v2.6.15-rc1); the third is introduced by
6b7d31fc (v2.6.15-rc1). To trigger the bug one should have
CAP_NET_ADMIN.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
commit 78b79876761b86653df89c48a7010b5cbd41a84a upstream.
Structures ipt_replace, compat_ipt_replace, and xt_get_revision are
copied from userspace. Fields of these structs that are
zero-terminated strings are not checked. When they are used as argument
to a format string containing "%s" in request_module(), some sensitive
information is leaked to userspace via argument of spawned modprobe
process.
The first and the third bugs were introduced before the git epoch; the
second was introduced in 2722971c (v2.6.17-rc1). To trigger the bug
one should have CAP_NET_ADMIN.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
commit 43629f8f5ea32a998d06d1bb41eefa0e821ff573 upstream.
Struct ca is copied from userspace. It is not checked whether the "device"
field is NULL terminated. This potentially leads to BUG() inside of
alloc_netdev_mqs() and/or information leak by creating a device with a name
made of contents of kernel stack.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
commit d846f71195d57b0bbb143382647c2c6638b04c5a upstream.
Struct tmp is copied from userspace. It is not checked whether the "name"
field is NULL terminated. This may lead to buffer overflow and passing
contents of kernel stack as a module name to try_then_request_module() and,
consequently, to modprobe commandline. It would be seen by all userspace
processes.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
commit c4c896e1471aec3b004a693c689f60be3b17ac86 upstream.
struct sco_conninfo has one padding byte in the end. Local variable
cinfo of type sco_conninfo is copied to userspace with this uninizialized
one byte, leading to old stack contents leak.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
commit be20250c13f88375345ad99950190685eda51eb8 upstream.
When parsing the FAC_NATIONAL_DIGIS facilities field, it's possible for
a remote host to provide more digipeaters than expected, resulting in
heap corruption. Check against ROSE_MAX_DIGIS to prevent overflows, and
abort facilities parsing on failure.
Additionally, when parsing the FAC_CCITT_DEST_NSAP and
FAC_CCITT_SRC_NSAP facilities fields, a remote host can provide a length
of less than 10, resulting in an underflow in a memcpy size, causing a
kernel panic due to massive heap corruption. A length of greater than
20 results in a stack overflow of the callsign array. Abort facilities
parsing on these invalid length values.
Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
commit d50e7e3604778bfc2dc40f440e0742dbae399d54 upstream.
Invalid nicknames containing only spaces will result in an underflow in
a memcpy size calculation, subsequently destroying the heap and
panicking.
v2 also catches the case where the provided nickname is longer than the
buffer size, which can result in controllable heap corruption.
Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
commit d370af0ef7951188daeb15bae75db7ba57c67846 upstream.
Length fields provided by a peer for names and attributes may be longer
than the destination array sizes. Validate lengths to prevent stack
buffer overflows.
Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
[ upstream commit 13ad17745c2cbd437d9e24b2d97393e0be11c439 ]
Ed Swierk <eswierk@bigswitch.com> writes:
> On 2.6.35.7
> ip link add link eth0 netns 9999 type macvlan
> where 9999 is a nonexistent PID triggers an oops and causes all network functions to hang:
> [10663.821898] BUG: unable to handle kernel NULL pointer dereference at 000000000000006d
> [10663.821917] IP: [<ffffffff8149c2fa>] __dev_alloc_name+0x9a/0x170
> [10663.821933] PGD 1d3927067 PUD 22f5c5067 PMD 0
> [10663.821944] Oops: 0000 [#1] SMP
> [10663.821953] last sysfs file: /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
> [10663.821959] CPU 3
> [10663.821963] Modules linked in: macvlan ip6table_filter ip6_tables rfcomm ipt_MASQUERADE binfmt_misc iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack sco ipt_REJECT bnep l2cap xt_tcpudp iptable_filter ip_tables x_tables bridge stp vboxnetadp vboxnetflt vboxdrv kvm_intel kvm parport_pc ppdev snd_hda_codec_intelhdmi snd_hda_codec_conexant arc4 iwlagn iwlcore mac80211 snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi i915 snd_seq_midi_event snd_seq thinkpad_acpi drm_kms_helper btusb tpm_tis nvram uvcvideo snd_timer snd_seq_device bluetooth videodev v4l1_compat v4l2_compat_ioctl32 tpm drm tpm_bios snd cfg80211 psmouse serio_raw intel_ips soundcore snd_page_alloc intel_agp i2c_algo_bit video output netconsole configfs lp parport usbhid hid e1000e sdhci_pci ahci libahci sdhci led_class
> [10663.822155]
> [10663.822161] Pid: 6000, comm: ip Not tainted 2.6.35-23-generic #41-Ubuntu 2901CTO/2901CTO
> [10663.822167] RIP: 0010:[<ffffffff8149c2fa>] [<ffffffff8149c2fa>] __dev_alloc_name+0x9a/0x170
> [10663.822177] RSP: 0018:ffff88014aebf7b8 EFLAGS: 00010286
> [10663.822182] RAX: 00000000fffffff4 RBX: ffff8801ad900800 RCX: 0000000000000000
> [10663.822187] RDX: ffff880000000000 RSI: 0000000000000000 RDI: ffff88014ad63000
> [10663.822191] RBP: ffff88014aebf808 R08: 0000000000000041 R09: 0000000000000041
> [10663.822196] R10: 0000000000000000 R11: dead000000200200 R12: ffff88014aebf818
> [10663.822201] R13: fffffffffffffffd R14: ffff88014aebf918 R15: ffff88014ad62000
> [10663.822207] FS: 00007f00c487f700(0000) GS:ffff880001f80000(0000) knlGS:0000000000000000
> [10663.822212] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [10663.822216] CR2: 000000000000006d CR3: 0000000231f19000 CR4: 00000000000026e0
> [10663.822221] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [10663.822226] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> [10663.822231] Process ip (pid: 6000, threadinfo ffff88014aebe000, task ffff88014afb16e0)
> [10663.822236] Stack:
> [10663.822240] ffff88014aebf808 ffffffff814a2bb5 ffff88014aebf7e8 00000000a00ee8d6
> [10663.822251] <0> 0000000000000000 ffffffffa00ef940 ffff8801ad900800 ffff88014aebf818
> [10663.822265] <0> ffff88014aebf918 ffff8801ad900800 ffff88014aebf858 ffffffff8149c413
> [10663.822281] Call Trace:
> [10663.822290] [<ffffffff814a2bb5>] ? dev_addr_init+0x75/0xb0
> [10663.822298] [<ffffffff8149c413>] dev_alloc_name+0x43/0x90
> [10663.822307] [<ffffffff814a85ee>] rtnl_create_link+0xbe/0x1b0
> [10663.822314] [<ffffffff814ab2aa>] rtnl_newlink+0x48a/0x570
> [10663.822321] [<ffffffff814aafcc>] ? rtnl_newlink+0x1ac/0x570
> [10663.822332] [<ffffffff81030064>] ? native_x2apic_icr_read+0x4/0x20
> [10663.822339] [<ffffffff814a8c17>] rtnetlink_rcv_msg+0x177/0x290
> [10663.822346] [<ffffffff814a8aa0>] ? rtnetlink_rcv_msg+0x0/0x290
> [10663.822354] [<ffffffff814c25d9>] netlink_rcv_skb+0xa9/0xd0
> [10663.822360] [<ffffffff814a8a85>] rtnetlink_rcv+0x25/0x40
> [10663.822367] [<ffffffff814c223e>] netlink_unicast+0x2de/0x2f0
> [10663.822374] [<ffffffff814c303e>] netlink_sendmsg+0x1fe/0x2e0
> [10663.822383] [<ffffffff81488533>] sock_sendmsg+0xf3/0x120
> [10663.822391] [<ffffffff815899fe>] ? _raw_spin_lock+0xe/0x20
> [10663.822400] [<ffffffff81168656>] ? __d_lookup+0x136/0x150
> [10663.822406] [<ffffffff815899fe>] ? _raw_spin_lock+0xe/0x20
> [10663.822414] [<ffffffff812b7a0d>] ? _atomic_dec_and_lock+0x4d/0x80
> [10663.822422] [<ffffffff8116ea90>] ? mntput_no_expire+0x30/0x110
> [10663.822429] [<ffffffff81486ff5>] ? move_addr_to_kernel+0x65/0x70
> [10663.822435] [<ffffffff81493308>] ? verify_iovec+0x88/0xe0
> [10663.822442] [<ffffffff81489020>] sys_sendmsg+0x240/0x3a0
> [10663.822450] [<ffffffff8111e2a9>] ? __do_fault+0x479/0x560
> [10663.822457] [<ffffffff815899fe>] ? _raw_spin_lock+0xe/0x20
> [10663.822465] [<ffffffff8116cf4a>] ? alloc_fd+0x10a/0x150
> [10663.822473] [<ffffffff8158d76e>] ? do_page_fault+0x15e/0x350
> [10663.822482] [<ffffffff8100a0f2>] system_call_fastpath+0x16/0x1b
> [10663.822487] Code: 90 48 8d 78 02 be 25 00 00 00 e8 92 1d e2 ff 48 85 c0 75 cf bf 20 00 00 00 e8 c3 b1 c6 ff 49 89 c7 b8 f4 ff ff ff 4d 85 ff 74 bd <4d> 8b 75 70 49 8d 45 70 48 89 45 b8 49 83 ee 58 eb 28 48 8d 55
> [10663.822618] RIP [<ffffffff8149c2fa>] __dev_alloc_name+0x9a/0x170
> [10663.822627] RSP <ffff88014aebf7b8>
> [10663.822631] CR2: 000000000000006d
> [10663.822636] ---[ end trace 3dfd6c3ad5327ca7 ]---
This bug was introduced in:
commit 81adee47dfb608df3ad0b91d230fb3cef75f0060
Author: Eric W. Biederman <ebiederm@aristanetworks.com>
Date: Sun Nov 8 00:53:51 2009 -0800
net: Support specifying the network namespace upon device creation.
There is no good reason to not support userspace specifying the
network namespace during device creation, and it makes it easier
to create a network device and pass it to a child network namespace
with a well known name.
We have to be careful to ensure that the target network namespace
for the new device exists through the life of the call. To keep
that logic clear I have factored out the network namespace grabbing
logic into rtnl_link_get_net.
In addtion we need to continue to pass the source network namespace
to the rtnl_link_ops.newlink method so that we can find the base
device source network namespace.
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Where apparently I forgot to add error handling to the path where we create
a new network device in a new network namespace, and pass in an invalid pid.
Cc: stable@kernel.org
Reported-by: Ed Swierk <eswierk@bigswitch.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
[ upstream commit 09a02fdb919876c01e8f05960750a418b3f7fa48 ]
This follows wireless-testing 9236d838c920e90708570d9bbd7bb82d30a38130
("cfg80211: fix extension channel checks to initiate communication") and
fixes accidental case fall-through. Without this fix, HT40 is entirely
blocked.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: stable@kernel.org
Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
stored a ref to the current cred struct in struct scm_cookie. This was fine
with AF_UNIX as that calls scm_destroy() from its packet sending functions, but
AF_NETLINK, which also uses scm_send(), does not call scm_destroy() - meaning
that the copied credentials leak each time SCM data is sent over a netlink
socket.
This can be triggered quite simply on a Fedora 13 or 14 userspace with the
2.6.35.11 kernel (or something based off of that) by calling:
#!/bin/bash
for ((i=0; i<100; i++))
do
su - -c /bin/true
cut -d: -f1 /proc/slabinfo | grep 'cred\|key\|task_struct'
cat /proc/keys | wc -l
done
This leaks the session key that pam_keyinit creates for 'su -', which appears
in /proc/keys as being revoked (has the R flag set against it) afterward su is
called.
Furthermore, if CONFIG_SLAB=y, then the cred and key slab object usage counts
can be viewed and seen to increase. The key slab increases by one object per
loop, and this can be seen after the system has had a couple of minutes to
stand after the script above has been run on it.
If the system is working correctly, the key and cred counts should return to
roughly what they were before.
This patch from upstream (b47030c71dfd6c8cd5cb6e551b6f7f7cfc96f6a6) is needed
to fix the problem:
===============================================================================
From: Eric W. Biederman <ebiederm@xmission.com>
af_netlink: Add needed scm_destroy after scm_send.
scm_send occasionally allocates state in the scm_cookie, so I have
modified netlink_sendmsg to guarantee that when scm_send succeeds
scm_destory will be called to free that state.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@free.fr>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
