| Age | Commit message (Collapse) | Author |
|---|
|
Because idr can be used with any of a number of locks or with
any flavor of RCU, just disable the lockdep-based diagnostics.
If idr needs diagnostics, the check expression will need to be
passed into the relevant idr primitives as an additional
argument.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <1266887105-1528-11-git-send-email-paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This is retry of reverted 859ddf09743a8cc680af33f7259ccd0fd36bfe9d
("idr: fix a critical misallocation bug") which contained two bugs.
* pa[idp->layers] should be cleared even if it's not used by
sub_alloc() because it's used by mark idr_mark_full().
* The original condition check also assigned pa[l] to p which the new
code didn't do thus leaving p pointing at the wrong layer.
Both problems have been fixed and the idr code has received good amount
testing using userland testing setup where simple bitmap allocator is
run parallel to verify the result of idr allocation.
The bug this patch fixes is caused by sub_alloc() optimization path
bypassing out-of-room condition check and restarting allocation loop
with starting value higher than maximum allowed value. For detailed
description, please read commit message of 859ddf09.
Signed-off-by: Tejun Heo <tj@kernel.org>
Based-on-patch-from: Eric Paris <eparis@redhat.com>
Reported-by: Eric Paris <eparis@redhat.com>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Tested-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 859ddf09743a8cc680af33f7259ccd0fd36bfe9d tried to fix
misallocation bug but broke full bit marking by not clearing
pa[idp->layers] and also is causing X failures due to lookup failure
in drm code. The cause of the latter hasn't been found yet. Revert
the fix for now.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Eric Paris located a bug in idr. With IDR_BITS of 6, it grows to three
layers when id 4096 is first allocated. When that happens, idr wraps
incorrectly and searches the idr array ignoring the high bits. The
following test code from Eric demonstrates the bug nicely.
#include <linux/idr.h>
#include <linux/kernel.h>
#include <linux/module.h>
static DEFINE_IDR(test_idr);
int init_module(void)
{
int ret, forty95, forty96;
void *addr;
/* add 2 entries both with 4095 as the start address */
again1:
if (!idr_pre_get(&test_idr, GFP_KERNEL))
return -ENOMEM;
ret = idr_get_new_above(&test_idr, (void *)4095, 4095, &forty95);
if (ret) {
if (ret == -EAGAIN)
goto again1;
return ret;
}
if (forty95 != 4095)
printk(KERN_ERR "hmmm, forty95=%d\n", forty95);
again2:
if (!idr_pre_get(&test_idr, GFP_KERNEL))
return -ENOMEM;
ret = idr_get_new_above(&test_idr, (void *)4096, 4095, &forty96);
if (ret) {
if (ret == -EAGAIN)
goto again2;
return ret;
}
if (forty96 != 4096)
printk(KERN_ERR "hmmm, forty96=%d\n", forty96);
/* try to find the 2 entries, noticing that 4096 broke */
addr = idr_find(&test_idr, forty95);
if ((int)addr != forty95)
printk(KERN_ERR "hmmm, after find forty95=%d addr=%d\n", forty95, (int)addr);
addr = idr_find(&test_idr, forty96);
if ((int)addr != forty96)
printk(KERN_ERR "hmmm, after find forty96=%d addr=%d\n", forty96, (int)addr);
/* really weird, the entry which should be at 4096 is actually at 0!! */
addr = idr_find(&test_idr, 0);
if ((int)addr)
printk(KERN_ERR "found an entry at id=0 for addr=%d\n", (int)addr);
idr_remove(&test_idr, forty95);
idr_remove(&test_idr, forty96);
return 0;
}
void cleanup_module(void)
{
}
MODULE_AUTHOR("Eric Paris <eparis@redhat.com>");
MODULE_DESCRIPTION("Simple idr test");
MODULE_LICENSE("GPL");
This happens because when sub_alloc() back tracks it doesn't always do it
step-by-step while the over-the-limit detection assumes step-by-step
backtracking. The logic in sub_alloc() looks like the following.
restart:
clear pa[top level + 1] for end cond detection
l = top level
while (true) {
search for empty slot at this level
if (not found) {
push id to the next possible value
l++
A: if (pa[l] is clear)
failed, return asking caller to grow the tree
if (going up 1 level gives more slots to search)
continue the while loop above with the incremented l
else
C: goto restart
}
adjust id accordingly to the found slot
if (l == 0)
return found id;
create lower level if not there yet
record pa[l] and l--
}
Test A is the fail exit condition but this assumes that failure is
propagated upwared one level at a time but the B optimization path breaks
the assumption and restarts the whole thing with a start value which is
above the possible limit with the current layers. sub_alloc() assumes the
start id value is inside the limit when called and test A is the only exit
condition check, so it ends up searching for empty slot while ignoring
high set bit.
So, for 4095->4096 test, level0 search fails but pa[1] contains a valid
pointer. However, going up 1 level wouldn't give any more empty slot so
it takes C and when the whole thing restarts nobody notices the high bit
set beyond the top level.
This patch fixes the bug by changing the fail exit condition check to full
id limit check.
Based-on-patch-from: Eric Paris <eparis@redhat.com>
Reported-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
fix some typos and punctuation in comments
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Patch for Per-CSS(Cgroup Subsys State) ID and private hierarchy code.
This patch attaches unique ID to each css and provides following.
- css_lookup(subsys, id)
returns pointer to struct cgroup_subysys_state of id.
- css_get_next(subsys, id, rootid, depth, foundid)
returns the next css under "root" by scanning
When cgroup_subsys->use_id is set, an id for css is maintained.
The cgroup framework only parepares
- css_id of root css for subsys
- id is automatically attached at creation of css.
- id is *not* freed automatically. Because the cgroup framework
don't know lifetime of cgroup_subsys_state.
free_css_id() function is provided. This must be called by subsys.
There are several reasons to develop this.
- Saving space .... For example, memcg's swap_cgroup is array of
pointers to cgroup. But it is not necessary to be very fast.
By replacing pointers(8bytes per ent) to ID (2byes per ent), we can
reduce much amount of memory usage.
- Scanning without lock.
CSS_ID provides "scan id under this ROOT" function. By this, scanning
css under root can be written without locks.
ex)
do {
rcu_read_lock();
next = cgroup_get_next(subsys, id, root, &found);
/* check sanity of next here */
css_tryget();
rcu_read_unlock();
id = found + 1
} while(...)
Characteristics:
- Each css has unique ID under subsys.
- Lifetime of ID is controlled by subsys.
- css ID contains "ID" and "Depth in hierarchy" and stack of hierarchy
- Allowed ID is 1-65535, ID 0 is UNUSED ID.
Design Choices:
- scan-by-ID v.s. scan-by-tree-walk.
As /proc's pid scan does, scan-by-ID is robust when scanning is done
by following kind of routine.
scan -> rest a while(release a lock) -> conitunue from interrupted
memcg's hierarchical reclaim does this.
- When subsys->use_id is set, # of css in the system is limited to
65535.
[bharata@linux.vnet.ibm.com: remove rcu_read_lock() from css_get_next()]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix a problem in the IDR system, where an idr_remove_all() hands a data
element to call_rcu() (via free_layer()) before making that data element
inaccessible to new readers. This is very bad, and results in readers
still having a reference to this data element at the end of the grace
period.
Tests on large machines that concurrently map and unmap user-space memory
within the same multithreaded process result in crashes within about five
minutes. Applying this patch increases the kernel's longevity to the
three-to-eight-hour range.
There appear to be other similar problems in idr_get_empty_slot() and
sub_remove(), but I fixed the easy one in idr_remove_all() first. It is
therefore no surprise that failures still occur.
Located-by: Milton Miller II <miltonm@austin.ibm.com>
Tested-by: Milton Miller II <miltonm@austin.ibm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
David points out that the idr_remove_all() function returns unused slabs
to the kmem cache, but needs to zero them first or else they will be
uninitialized upon next use. This causes crashes which have been observed
in the firewire subsystem.
He fixed this by zeroing the object before freeing it in idr_remove_all().
But we agree that simply removing the constructor and zeroing the object
at allocation time is simpler than relying upon slab constructor machinery
and might even be faster.
This problem was introduced by "idr: make idr_remove rcu-safe" (commit
cf481c20c476ad2c0febdace9ce23f5a4db19582), which was first released in
2.6.27.
There are no known codesites which trigger this bug in 2.6.27 or 2.6.28.
The post-2.6.28 firewire changes are the only known triggerer.
There might of course be not-yet-discovered triggerers in 2.6.27 and
2.6.28, and there might be out-of-tree triggerers which are added to those
kernel versions. I'll let the -stable guys decide whether they want to
backport this fix.
Reported-by: David Moore <dcm@acm.org>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Nadia Derbey <Nadia.Derbey@bull.net>
Cc: Paul E. McKenney <paulmck@us.ibm.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Kristian Hgsberg <krh@redhat.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
idr_get_new_above() and ida_get_new_above() return an id in the range of
@staring_id ... 0x7fffffff, not 0 ... 0x7fffffff.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The last patch to lib/idr.c caused a bug if idr_get_new_above() was
called on an empty idr.
Usually, nodes stay on the same layer. New layers are added to the top
of the tree.
The exception is idr_get_new_above() on an empty tree: In this case, the
new root node is first added on layer 0, then moved upwards. p->layer
was not updated.
As usual: You shall never rely on the source code comments, they will
only mislead you.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
2nd part of the fixes needed for
http://bugzilla.kernel.org/show_bug.cgi?id=11796.
When the idr tree is either grown or shrunk, then the update to the number
of layers and the top pointer were not atomic. This race caused crashes.
The attached patch fixes that by replicating the layers counter in each
layer, thus idr_find doesn't need idp->layers anymore.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Clement Calmels <cboulte@gmail.com>
Cc: Nadia Derbey <Nadia.Derbey@bull.net>
Cc: Pierre Peiffer <peifferp@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Kmem cache passed to constructor is only needed for constructors that are
themselves multiplexeres. Nobody uses this "feature", nor does anybody uses
passed kmem cache in non-trivial way, so pass only pointer to object.
Non-trivial places are:
arch/powerpc/mm/init_64.c
arch/powerpc/mm/hugetlbpage.c
This is flag day, yes.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Jon Tollefson <kniht@linux.vnet.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Matt Mackall <mpm@selenic.com>
[akpm@linux-foundation.org: fix arch/powerpc/mm/hugetlbpage.c]
[akpm@linux-foundation.org: fix mm/slab.c]
[akpm@linux-foundation.org: fix ubifs]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Introduce the free_layer() routine: it is the one that actually frees memory
after a grace period has elapsed.
Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net>
Reviewed-by: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Jim Houston <jim.houston@comcast.net>
Cc: Pierre Peiffer <peifferp@gmail.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Make idr_find rcu-safe: it can now be called inside an rcu_read critical
section.
Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net>
Reviewed-by: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Jim Houston <jim.houston@comcast.net>
Cc: Pierre Peiffer <peifferp@gmail.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Make the idr_get_new* routines rcu-safe.
Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net>
Reviewed-by: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Jim Houston <jim.houston@comcast.net>
Cc: Pierre Peiffer <peifferp@gmail.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Do some code factorization in the return code analysis.
Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Jim Houston <jim.houston@comcast.net>
Cc: Pierre Peiffer <peifferp@gmail.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix the incomplete printk call.
Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net>
Reviewed-by: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Jim Houston <jim.houston@comcast.net>
Cc: Pierre Peiffer <peifferp@gmail.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is a trivial patch that renames:
. alloc_layer to get_from_free_list since it idr_pre_get that actually
allocates memory.
. free_layer to move_to_free_list since memory is not actually freed there.
This makes things more clear for the next patches.
Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net>
Reviewed-by: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Jim Houston <jim.houston@comcast.net>
Cc: Pierre Peiffer <peifferp@gmail.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The return inside the loop makes us free only a single layer.
Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Jim Houston <jim.houston@comcast.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Avoid a possible kmem_cache_create() failure by creating idr_layer_cache
unconditionary at boot time rather than creating it on-demand when idr_init()
is called the first time.
This change also enables us to eliminate the check every time idr_init() is
called.
[akpm@linux-foundation.org: rename init_id_cache() to idr_init_cache()]
[akpm@linux-foundation.org: fix alpha build]
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Slab constructors currently have a flags parameter that is never used. And
the order of the arguments is opposite to other slab functions. The object
pointer is placed before the kmem_cache pointer.
Convert
ctor(void *object, struct kmem_cache *s, unsigned long flags)
to
ctor(struct kmem_cache *s, void *object)
throughout the kernel
[akpm@linux-foundation.org: coupla fixes]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
"error" is always equal to 0.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Slab destructors were no longer supported after Christoph's
c59def9f222d44bb7e2f0a559f2906191a0862d7 change. They've been
BUGs for both slab and slub, and slob never supported them
either.
This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
|
|
Remove all ids from the given idr tree. idr_destroy() only frees up
unused, cached idp_layers, but this function will remove all id mappings
and leave all idp_layers unused.
A typical clean-up sequence for objects stored in an idr tree, will use
idr_for_each() to free all objects, if necessay, then idr_remove_all() to
remove all ids, and idr_destroy() to free up the cached idr_layers.
Signed-off-by: Kristian Hoegsberg <krh@redhat.com>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch adds an iterator function for the idr data structure. Compared
to just iterating through the idr with an integer and idr_find, this
iterator is (almost, but not quite) linear in the number of elements, as
opposed to the number of integers in the range covered by the idr. This
makes a difference for sparse idrs, but more importantly, it's a nicer way
to iterate through the elements.
The drm subsystem is moving to idr for tracking contexts and drawables, and
with this change, we can use the idr exclusively for tracking these
resources.
[akpm@linux-foundation.org: fix comment]
Signed-off-by: Kristian Hoegsberg <krh@redhat.com>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Implement idr based id allocator. ida is used the same way idr is
used but lacks id -> ptr translation and thus consumes much less
memory. struct ida_bitmap is attached as leaf nodes to idr tree which
is managed by the idr code. Each ida_bitmap is 128bytes long and
contains slightly less than a thousand slots.
ida is more aggressive with releasing extra resources acquired using
ida_pre_get(). After every successful id allocation, ida frees one
reserved idr_layer if possible. Reserved ida_bitmap is not freed
automatically but only one ida_bitmap is reserved and it's almost
always used right away. Under most circumstances, ida won't hold on
to memory for too long which isn't actively used.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Separate out idr_mark_full() from sub_alloc() and make marking the
allocated slot full the responsibility of idr_get_new_above_int().
Allocation part of idr_get_new_above_int() is renamed to
idr_get_empty_slot(). New idr_get_new_above_int() allocates a slot
using the function, install the user pointer and marks it full using
idr_mark_full().
This change doesn't introduce any behavior change. This will be
used by ida.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
In sub_alloc(), when bitmap search fails, it goes up one level to
continue search. This is done by updating the id cursor and searching
the upper level again. If the cursor was at the end of the upper
level, we need to go further than that.
This wasn't implemented and when that happens the part of the cursor
which indexes into the upper level wraps and sub_alloc() ends up
searching the wrong bitmap. It allocates id which doesn't match the
actual slot.
This patch fixes this by restarting from the top if the search needs
to go higher than one level.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
A variety of (mostly) innocuous fixes to the embedded kernel-doc content in
source files, including:
* make multi-line initial descriptions single line
* denote some function names, constants and structs as such
* change erroneous opening '/*' to '/**' in a few places
* reword some text for clarity
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Replace all uses of kmem_cache_t with struct kmem_cache.
The patch was generated using the following script:
#!/bin/sh
#
# Replace one string by another in all the kernel sources.
#
set -e
for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do
quilt add $file
sed -e "1,\$s/$1/$2/g" $file >/tmp/$$
mv /tmp/$$ $file
quilt refresh
done
The script was run like this
sh replace kmem_cache_t "struct kmem_cache"
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Currently, the code in lib/idr.c uses a bare spin_lock(&idp->lock) to do
internal locking. This is a nasty trap for code that might call idr
functions from different contexts; for example, it seems perfectly
reasonable to call idr_get_new() from process context and idr_remove() from
interrupt context -- but with the current locking this would lead to a
potential deadlock.
The simplest fix for this is to just convert the idr locking to use
spin_lock_irqsave().
In particular, this fixes a very complicated locking issue detected by
lockdep, involving the ib_ipoib driver's priv->lock and dev->_xmit_lock,
which get involved with the ib_sa module's query_idr.lock.
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Zach Brown <zach.brown@oracle.com>,
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This patch adds idr_replace() to replace an existing pointer in a single
operation.
Device-mapper will use this to update the pointer it stored against a given
id.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
I ran into a bug where the kernel died in the idr code:
cpu 0x1d: Vector: 300 (Data Access) at [c000000b7096f710]
pc: c0000000001f8984: .idr_get_new_above_int+0x140/0x330
lr: c0000000001f89b4: .idr_get_new_above_int+0x170/0x330
sp: c000000b7096f990
msr: 800000000000b032
dar: 0
dsisr: 40010000
current = 0xc000000b70d43830
paca = 0xc000000000556900
pid = 2022, comm = hwup
1d:mon> t
[c000000b7096f990] c0000000000d2ad8 .expand_files+0x2e8/0x364 (unreliable)
[c000000b7096faa0] c0000000001f8bf8 .idr_get_new_above+0x18/0x68
[c000000b7096fb20] c00000000002a054 .init_new_context+0x5c/0xf0
[c000000b7096fbc0] c000000000049dc8 .copy_process+0x91c/0x1404
[c000000b7096fcd0] c00000000004a988 .do_fork+0xd8/0x224
[c000000b7096fdc0] c00000000000ebdc .sys_clone+0x5c/0x74
[c000000b7096fe30] c000000000008950 .ppc_clone+0x8/0xc
|
|
Cleanup trailing whitespace, blank lines, CodingStyle issues etc, for
lib/idr.c
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Fix a bug which was reported and diagnosed by
Stefan Jones <stefan.jones@churchillrandoms.co.uk>
IDR trees include a cache of idr_layer objects. There's no way to destroy
this cache, so when we discard an overall idr tree we end up leaking some
memory.
Add and use idr_destroy() for this. v9fs and infiniband also need to use
idr_destroy() to avoid leaks.
Or, we make the cache global, like radix_tree_preload(). Which is probably
better. Later.
Cc: Eric Van Hensbergen <ericvh@ericvh.myip.org>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Robert Love <rml@novell.com>
Cc: John McCutchan <ttb@tentacle.dhs.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
There is an off by one problem with idr_get_new_above.
The comment and function name suggest that it will return an id >
starting_id, but it actually returned an id >= starting_id, and kernel
callers other than inotify treated it as such.
The patch below fixes the comment, and fixes inotifys usage. The
function name still doesn't match the behaviour, but it never did.
Signed-off-by: John McCutchan <ttb@tentacle.dhs.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This patch fixes overrun of array pa:
92 struct idr_layer *pa[MAX_LEVEL];
in
98 l = idp->layers;
99 pa[l--] = NULL;
by passing idp->layers, set in
202 idp->layers = layers;
to function sub_alloc in
203 v = sub_alloc(idp, ptr, &id);
Signed-off-by: Zaur Kambarov <zkambarov@coverity.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
|
