aboutsummaryrefslogtreecommitdiff
path: root/kernel/sched.c
AgeCommit message (Collapse)Author
2011-03-23ftrace: Fix memory leak with function graph and cpu hotplugSteven Rostedt
commit 868baf07b1a259f5f3803c1dc2777b6c358f83cf upstream. When the fuction graph tracer starts, it needs to make a special stack for each task to save the real return values of the tasks. All running tasks have this stack created, as well as any new tasks. On CPU hot plug, the new idle task will allocate a stack as well when init_idle() is called. The problem is that cpu hotplug does not create a new idle_task. Instead it uses the idle task that existed when the cpu went down. ftrace_graph_init_task() will add a new ret_stack to the task that is given to it. Because a clone will make the task have a stack of its parent it does not check if the task's ret_stack is already NULL or not. When the CPU hotplug code starts a CPU up again, it will allocate a new stack even though one already existed for it. The solution is to treat the idle_task specially. In fact, the function_graph code already does, just not at init_idle(). Instead of using the ftrace_graph_init_task() for the idle task, which that function expects the task to be a clone, have a separate ftrace_graph_init_idle_task(). Also, we will create a per_cpu ret_stack that is used by the idle task. When we call ftrace_graph_init_idle_task() it will check if the idle task's ret_stack is NULL, if it is, then it will assign it the per_cpu ret_stack. Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17sched: Fix wake_affine() vs RT tasksPeter Zijlstra
Commit: e51fd5e22e12b39f49b1bb60b37b300b17378a43 upstream Mike reports that since e9e9250b (sched: Scale down cpu_power due to RT tasks), wake_affine() goes funny on RT tasks due to them still having a !0 weight and wake_affine() still subtracts that from the rq weight. Since nobody should be using se->weight for RT tasks, set the value to zero. Also, since we now use ->cpu_power to normalize rq weights to account for RT cpu usage, add that factor into the imbalance computation. Reported-by: Mike Galbraith <efault@gmx.de> Tested-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1275316109.27810.22969.camel@twins> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17sched: Fix idle balancingNikhil Rao
Commit: d5ad140bc1505a98c0f040937125bfcbb508078f upstream An earlier commit reverts idle balancing throttling reset to fix a 30% regression in volanomark throughput. We still need to reset idle_stamp when we pull a task in newidle balance. Reported-by: Alex Shi <alex.shi@intel.com> Signed-off-by: Nikhil Rao <ncrao@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1290022924-3548-1-git-send-email-ncrao@google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17sched: Fix volanomark performance regressionAlex Shi
Commit: b5482cfa1c95a188b3054fa33274806add91bbe5 upstream Commit fab4762 triggers excessive idle balancing, causing a ~30% loss in volanomark throughput. Remove idle balancing throttle reset. Originally-by: Alex Shi <alex.shi@intel.com> Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Nikhil Rao <ncrao@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1289928732.5169.211.camel@maggy.simson.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17sched: Fix cross-sched-class wakeup preemptionPeter Zijlstra
Commit: 1e5a74059f9059d330744eac84873b1b99657008 upstream Instead of dealing with sched classes inside each check_preempt_curr() implementation, pull out this logic into the generic wakeup preemption path. This fixes a hang in KVM (and others) where we are waiting for the stop machine thread to run ... Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Tested-by: Marcelo Tosatti <mtosatti@redhat.com> Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1288891946.2039.31.camel@laptop> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17sched: Use group weight, idle cpu metrics to fix imbalances during idleSuresh Siddha
Commit: aae6d3ddd8b90f5b2c8d79a2b914d1706d124193 upstream Currently we consider a sched domain to be well balanced when the imbalance is less than the domain's imablance_pct. As the number of cores and threads are increasing, current values of imbalance_pct (for example 25% for a NUMA domain) are not enough to detect imbalances like: a) On a WSM-EP system (two sockets, each having 6 cores and 12 logical threads), 24 cpu-hogging tasks get scheduled as 13 on one socket and 11 on another socket. Leading to an idle HT cpu. b) On a hypothetial 2 socket NHM-EX system (each socket having 8 cores and 16 logical threads), 16 cpu-hogging tasks can get scheduled as 9 on one socket and 7 on another socket. Leaving one core in a socket idle whereas in another socket we have a core having both its HT siblings busy. While this issue can be fixed by decreasing the domain's imbalance_pct (by making it a function of number of logical cpus in the domain), it can potentially cause more task migrations across sched groups in an overloaded case. Fix this by using imbalance_pct only during newly_idle and busy load balancing. And during idle load balancing, check if there is an imbalance in number of idle cpu's across the busiest and this sched_group or if the busiest group has more tasks than its weight that the idle cpu in this_group can pull. Reported-by: Nikhil Rao <ncrao@google.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1284760952.2676.11.camel@sbsiddha-MOBL3.sc.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17sched, cgroup: Fixup broken cgroup movementPeter Zijlstra
Commit: b2b5ce022acf5e9f52f7b78c5579994fdde191d4 upstream Dima noticed that we fail to correct the ->vruntime of sleeping tasks when we move them between cgroups. Reported-by: Dima Zavin <dima@android.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Tested-by: Mike Galbraith <efault@gmx.de> LKML-Reference: <1287150604.29097.1513.camel@twins> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17sched: Export account_system_vtime()Ingo Molnar
Commit: b7dadc38797584f6203386da1947ed5edf516646 upstream KVM uses it for example: ERROR: "account_system_vtime" [arch/x86/kvm/kvm.ko] undefined! Cc: Venkatesh Pallipadi <venki@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1286237003-12406-3-git-send-email-venki@google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17sched: Call tick_check_idle before __irq_enterVenkatesh Pallipadi
Commit: d267f87fb8179c6dba03d08b91952e81bc3723c7 upstream When CPU is idle and on first interrupt, irq_enter calls tick_check_idle() to notify interruption from idle. But, there is a problem if this call is done after __irq_enter, as all routines in __irq_enter may find stale time due to yet to be done tick_check_idle. Specifically, trace calls in __irq_enter when they use global clock and also account_system_vtime change in this patch as it wants to use sched_clock_cpu() to do proper irq timing. But, tick_check_idle was moved after __irq_enter intentionally to prevent problem of unneeded ksoftirqd wakeups by the commit ee5f80a: irq: call __irq_enter() before calling the tick_idle_check Impact: avoid spurious ksoftirqd wakeups Moving tick_check_idle() before __irq_enter and wrapping it with local_bh_enable/disable would solve both the problems. Fixed-by: Yong Zhang <yong.zhang0@gmail.com> Signed-off-by: Venkatesh Pallipadi <venki@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1286237003-12406-9-git-send-email-venki@google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17sched: Remove irq time from available CPU powerVenkatesh Pallipadi
Commit: aa483808516ca5cacfa0e5849691f64fec25828e upstream The idea was suggested by Peter Zijlstra here: http://marc.info/?l=linux-kernel&m=127476934517534&w=2 irq time is technically not available to the tasks running on the CPU. This patch removes irq time from CPU power piggybacking on sched_rt_avg_update(). Tested this by keeping CPU X busy with a network intensive task having 75% oa a single CPU irq processing (hard+soft) on a 4-way system. And start seven cycle soakers on the system. Without this change, there will be two tasks on each CPU. With this change, there is a single task on irq busy CPU X and remaining 7 tasks are spread around among other 3 CPUs. Signed-off-by: Venkatesh Pallipadi <venki@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1286237003-12406-8-git-send-email-venki@google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17sched: Do not account irq time to current taskVenkatesh Pallipadi
Commit: 305e6835e05513406fa12820e40e4a8ecb63743c upstream Scheduler accounts both softirq and interrupt processing times to the currently running task. This means, if the interrupt processing was for some other task in the system, then the current task ends up being penalized as it gets shorter runtime than otherwise. Change sched task accounting to acoount only actual task time from currently running task. Now update_curr(), modifies the delta_exec to depend on rq->clock_task. Note that this change only handles CONFIG_IRQ_TIME_ACCOUNTING case. We can extend this to CONFIG_VIRT_CPU_ACCOUNTING with minimal effort. But, thats for later. This change will impact scheduling behavior in interrupt heavy conditions. Tested on a 4-way system with eth0 handled by CPU 2 and a network heavy task (nc) running on CPU 3 (and no RSS/RFS). With that I have CPU 2 spending 75%+ of its time in irq processing. CPU 3 spending around 35% time running nc task. Now, if I run another CPU intensive task on CPU 2, without this change /proc/<pid>/schedstat shows 100% of time accounted to this task. With this change, it rightly shows less than 25% accounted to this task as remaining time is actually spent on irq processing. Signed-off-by: Venkatesh Pallipadi <venki@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1286237003-12406-7-git-send-email-venki@google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17sched: Add IRQ_TIME_ACCOUNTING, finer accounting of irq timeVenkatesh Pallipadi
Commit: b52bfee445d315549d41eacf2fa7c156e7d153d5 upstream s390/powerpc/ia64 have support for CONFIG_VIRT_CPU_ACCOUNTING which does the fine granularity accounting of user, system, hardirq, softirq times. Adding that option on archs like x86 will be challenging however, given the state of TSC reliability on various platforms and also the overhead it will add in syscall entry exit. Instead, add a lighter variant that only does finer accounting of hardirq and softirq times, providing precise irq times (instead of timer tick based samples). This accounting is added with a new config option CONFIG_IRQ_TIME_ACCOUNTING so that there won't be any overhead for users not interested in paying the perf penalty. This accounting is based on sched_clock, with the code being generic. So, other archs may find it useful as well. This patch just adds the core logic and does not enable this logic yet. Signed-off-by: Venkatesh Pallipadi <venki@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1286237003-12406-5-git-send-email-venki@google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17sched: Fix softirq time accountingVenkatesh Pallipadi
Commit: 75e1056f5c57050415b64cb761a3acc35d91f013 upstream Peter Zijlstra found a bug in the way softirq time is accounted in VIRT_CPU_ACCOUNTING on this thread: http://lkml.indiana.edu/hypermail//linux/kernel/1009.2/01366.html The problem is, softirq processing uses local_bh_disable internally. There is no way, later in the flow, to differentiate between whether softirq is being processed or is it just that bh has been disabled. So, a hardirq when bh is disabled results in time being wrongly accounted as softirq. Looking at the code a bit more, the problem exists in !VIRT_CPU_ACCOUNTING as well. As account_system_time() in normal tick based accouting also uses softirq_count, which will be set even when not in softirq with bh disabled. Peter also suggested solution of using 2*SOFTIRQ_OFFSET as irq count for local_bh_{disable,enable} and using just SOFTIRQ_OFFSET while softirq processing. The patch below does that and adds API in_serving_softirq() which returns whether we are currently processing softirq or not. Also changes one of the usages of softirq_count in net/sched/cls_cgroup.c to in_serving_softirq. Looks like many usages of in_softirq really want in_serving_softirq. Those changes can be made individually on a case by case basis. Signed-off-by: Venkatesh Pallipadi <venki@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1286237003-12406-2-git-send-email-venki@google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17sched: Drop group_capacity to 1 only if local group has extra capacityNikhil Rao
Commit: 75dd321d79d495a0ee579e6249ebc38ddbb2667f upstream When SD_PREFER_SIBLING is set on a sched domain, drop group_capacity to 1 only if the local group has extra capacity. The extra check prevents the case where you always pull from the heaviest group when it is already under-utilized (possible with a large weight task outweighs the tasks on the system). For example, consider a 16-cpu quad-core quad-socket machine with MC and NUMA scheduling domains. Let's say we spawn 15 nice0 tasks and one nice-15 task, and each task is running on one core. In this case, we observe the following events when balancing at the NUMA domain: - find_busiest_group() will always pick the sched group containing the niced task to be the busiest group. - find_busiest_queue() will then always pick one of the cpus running the nice0 task (never picks the cpu with the nice -15 task since weighted_cpuload > imbalance). - The load balancer fails to migrate the task since it is the running task and increments sd->nr_balance_failed. - It repeats the above steps a few more times until sd->nr_balance_failed > 5, at which point it kicks off the active load balancer, wakes up the migration thread and kicks the nice 0 task off the cpu. The load balancer doesn't stop until we kick out all nice 0 tasks from the sched group, leaving you with 3 idle cpus and one cpu running the nice -15 task. When balancing at the NUMA domain, we drop sgs.group_capacity to 1 if the child domain (in this case MC) has SD_PREFER_SIBLING set. Subsequent load checks are not relevant because the niced task has a very large weight. In this patch, we add an extra condition to the "if(prefer_sibling)" check in update_sd_lb_stats(). We drop the capacity of a group only if the local group has extra capacity, ie. nr_running < group_capacity. This patch preserves the original intent of the prefer_siblings check (to spread tasks across the system in low utilization scenarios) and fixes the case above. It helps in the following ways: - In low utilization cases (where nr_tasks << nr_cpus), we still drop group_capacity down to 1 if we prefer siblings. - On very busy systems (where nr_tasks >> nr_cpus), sgs.nr_running will most likely be > sgs.group_capacity. - When balancing large weight tasks, if the local group does not have extra capacity, we do not pick the group with the niced task as the busiest group. This prevents failed balances, active migration and the under-utilization described above. Signed-off-by: Nikhil Rao <ncrao@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1287173550-30365-5-git-send-email-ncrao@google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17sched: Force balancing on newidle balance if local group has capacityNikhil Rao
Commit: fab476228ba37907ad75216d0fd9732ada9c119e upstream This patch forces a load balance on a newly idle cpu when the local group has extra capacity and the busiest group does not have any. It improves system utilization when balancing tasks with a large weight differential. Under certain situations, such as a niced down task (i.e. nice = -15) in the presence of nr_cpus NICE0 tasks, the niced task lands on a sched group and kicks away other tasks because of its large weight. This leads to sub-optimal utilization of the machine. Even though the sched group has capacity, it does not pull tasks because sds.this_load >> sds.max_load, and f_b_g() returns NULL. With this patch, if the local group has extra capacity, we shortcut the checks in f_b_g() and try to pull a task over. A sched group has extra capacity if the group capacity is greater than the number of running tasks in that group. Thanks to Mike Galbraith for discussions leading to this patch and for the insight to reuse SD_NEWIDLE_BALANCE. Signed-off-by: Nikhil Rao <ncrao@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1287173550-30365-4-git-send-email-ncrao@google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17sched: Set group_imb only a task can be pulled from the busiest cpuNikhil Rao
Commit: 2582f0eba54066b5e98ff2b27ef0cfa833b59f54 upstream When cycling through sched groups to determine the busiest group, set group_imb only if the busiest cpu has more than 1 runnable task. This patch fixes the case where two cpus in a group have one runnable task each, but there is a large weight differential between these two tasks. The load balancer is unable to migrate any task from this group, and hence do not consider this group to be imbalanced. Signed-off-by: Nikhil Rao <ncrao@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1286996978-7007-3-git-send-email-ncrao@google.com> [ small code readability edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17sched: Do not consider SCHED_IDLE tasks to be cache hotNikhil Rao
Commit: ef8002f6848236de5adc613063ebeabddea8a6fb upstream This patch adds a check in task_hot to return if the task has SCHED_IDLE policy. SCHED_IDLE tasks have very low weight, and when run with regular workloads, are typically scheduled many milliseconds apart. There is no need to consider these tasks hot for load balancing. Signed-off-by: Nikhil Rao <ncrao@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1287173550-30365-2-git-send-email-ncrao@google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17sched: fix RCU lockdep splat from task_group()Peter Zijlstra
Commit: 6506cf6ce68d78a5470a8360c965dafe8e4b78e3 upstream This addresses the following RCU lockdep splat: [0.051203] CPU0: AMD QEMU Virtual CPU version 0.12.4 stepping 03 [0.052999] lockdep: fixing up alternatives. [0.054105] [0.054106] =================================================== [0.054999] [ INFO: suspicious rcu_dereference_check() usage. ] [0.054999] --------------------------------------------------- [0.054999] kernel/sched.c:616 invoked rcu_dereference_check() without protection! [0.054999] [0.054999] other info that might help us debug this: [0.054999] [0.054999] [0.054999] rcu_scheduler_active = 1, debug_locks = 1 [0.054999] 3 locks held by swapper/1: [0.054999] #0: (cpu_add_remove_lock){+.+.+.}, at: [<ffffffff814be933>] cpu_up+0x42/0x6a [0.054999] #1: (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff810400d8>] cpu_hotplug_begin+0x2a/0x51 [0.054999] #2: (&rq->lock){-.-...}, at: [<ffffffff814be2f7>] init_idle+0x2f/0x113 [0.054999] [0.054999] stack backtrace: [0.054999] Pid: 1, comm: swapper Not tainted 2.6.35 #1 [0.054999] Call Trace: [0.054999] [<ffffffff81068054>] lockdep_rcu_dereference+0x9b/0xa3 [0.054999] [<ffffffff810325c3>] task_group+0x7b/0x8a [0.054999] [<ffffffff810325e5>] set_task_rq+0x13/0x40 [0.054999] [<ffffffff814be39a>] init_idle+0xd2/0x113 [0.054999] [<ffffffff814be78a>] fork_idle+0xb8/0xc7 [0.054999] [<ffffffff81068717>] ? mark_held_locks+0x4d/0x6b [0.054999] [<ffffffff814bcebd>] do_fork_idle+0x17/0x2b [0.054999] [<ffffffff814bc89b>] native_cpu_up+0x1c1/0x724 [0.054999] [<ffffffff814bcea6>] ? do_fork_idle+0x0/0x2b [0.054999] [<ffffffff814be876>] _cpu_up+0xac/0x127 [0.054999] [<ffffffff814be946>] cpu_up+0x55/0x6a [0.054999] [<ffffffff81ab562a>] kernel_init+0xe1/0x1ff [0.054999] [<ffffffff81003854>] kernel_thread_helper+0x4/0x10 [0.054999] [<ffffffff814c353c>] ? restore_args+0x0/0x30 [0.054999] [<ffffffff81ab5549>] ? kernel_init+0x0/0x1ff [0.054999] [<ffffffff81003850>] ? kernel_thread_helper+0x0/0x10 [0.056074] Booting Node 0, Processors #1lockdep: fixing up alternatives. [0.130045] #2lockdep: fixing up alternatives. [0.203089] #3 Ok. [0.275286] Brought up 4 CPUs [0.276005] Total of 4 processors activated (16017.17 BogoMIPS). The cgroup_subsys_state structures referenced by idle tasks are never freed, because the idle tasks should be part of the root cgroup, which is not removable. The problem is that while we do in-fact hold rq->lock, the newly spawned idle thread's cpu is not yet set to the correct cpu so the lockdep check in task_group(): lockdep_is_held(&task_rq(p)->lock) will fail. But this is a chicken and egg problem. Setting the CPU's runqueue requires that the CPU's runqueue already be set. ;-) So insert an RCU read-side critical section to avoid the complaint. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17sched: Increment cache_nice_tries only on periodic lbVenkatesh Pallipadi
Commit: 58b26c4c025778c09c7a1438ff185080e11b7d0a upstream scheduler uses cache_nice_tries as an indicator to do cache_hot and active load balance, when normal load balance fails. Currently, this value is changed on any failed load balance attempt. That ends up being not so nice to workloads that enter/exit idle often, as they do more frequent new_idle balance and that pretty soon results in cache hot tasks being pulled in. Making the cache_nice_tries ignore failed new_idle balance seems to make better sense. With that only the failed load balance in periodic load balance gets accounted and the rate of accumulation of cache_nice_tries will not depend on idle entry/exit (short running sleep-wakeup kind of tasks). This reduces movement of cache_hot tasks. schedstat diff (after-before) excerpt from a workload that has frequent and short wakeup-idle pattern (:2 in cpu col below refers to NEWIDLE idx) This snapshot was across ~400 seconds. Without this change: domainstats: domain0 cpu cnt bln fld imb gain hgain nobusyq nobusyg 0:2 306487 219575 73167 110069413 44583 19070 1172 218403 1:2 292139 194853 81421 120893383 50745 21902 1259 193594 2:2 283166 174607 91359 129699642 54931 23688 1287 173320 3:2 273998 161788 93991 132757146 57122 24351 1366 160422 4:2 289851 215692 62190 83398383 36377 13680 851 214841 5:2 316312 222146 77605 117582154 49948 20281 988 221158 6:2 297172 195596 83623 122133390 52801 21301 929 194667 7:2 283391 178078 86378 126622761 55122 22239 928 177150 8:2 297655 210359 72995 110246694 45798 19777 1125 209234 9:2 297357 202011 79363 119753474 50953 22088 1089 200922 10:2 278797 178703 83180 122514385 52969 22726 1128 177575 11:2 272661 167669 86978 127342327 55857 24342 1195 166474 12:2 293039 204031 73211 110282059 47285 19651 948 203083 13:2 289502 196762 76803 114712942 49339 20547 1016 195746 14:2 264446 169609 78292 115715605 50459 21017 982 168627 15:2 260968 163660 80142 116811793 51483 21281 1064 162596 With this change: domainstats: domain0 cpu cnt bln fld imb gain hgain nobusyq nobusyg 0:2 272347 187380 77455 105420270 24975 1 953 186427 1:2 267276 172360 86234 116242264 28087 6 1028 171332 2:2 259769 156777 93281 123243134 30555 1 1043 155734 3:2 250870 143129 97627 127370868 32026 6 1188 141941 4:2 248422 177116 64096 78261112 22202 2 757 176359 5:2 275595 180683 84950 116075022 29400 6 778 179905 6:2 262418 162609 88944 119256898 31056 4 817 161792 7:2 252204 147946 92646 122388300 32879 4 824 147122 8:2 262335 172239 81631 110477214 26599 4 864 171375 9:2 261563 164775 88016 117203621 28331 3 849 163926 10:2 243389 140949 93379 121353071 29585 2 909 140040 11:2 242795 134651 98310 124768957 30895 2 1016 133635 12:2 255234 166622 79843 104696912 26483 4 746 165876 13:2 244944 151595 83855 109808099 27787 3 801 150794 14:2 241301 140982 89935 116954383 30403 6 845 140137 15:2 232271 128564 92821 119185207 31207 4 1416 127148 Signed-off-by: Venkatesh Pallipadi <venki@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1284167957-3675-1-git-send-email-venki@google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17sched: Move sched_avg_update() to update_cpu_load()Suresh Siddha
Commit: da2b71edd8a7db44fe1746261410a981f3e03632 upstream Currently sched_avg_update() (which updates rt_avg stats in the rq) is getting called from scale_rt_power() (in the load balance context) which doesn't take rq->lock. Fix it by moving the sched_avg_update() to more appropriate update_cpu_load() where the CFS load gets updated as well. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1282596171.2694.3.camel@sbsiddha-MOBL3> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17sched: Remove USER_SCHEDDhaval Giani
Commit: 7c9414385ebfdd87cc542d4e7e3bb0dbb2d3ce25 upstream Remove the USER_SCHED feature. It has been scheduled to be removed in 2.6.34 as per http://marc.info/?l=linux-kernel&m=125728479022976&w=2 [trace from referenced thread] [1046577.884289] general protection fault: 0000 [#1] SMP [1046577.911332] last sysfs file: /sys/devices/platform/coretemp.7/temp1_input [1046577.938715] CPU 3 [1046577.965814] Modules linked in: ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables coretemp k8temp [1046577.994456] Pid: 38, comm: events/3 Not tainted 2.6.32.27intel #1 X8DT3 [1046578.023166] RIP: 0010:[] [] sched_destroy_group+0x3c/0x10d [1046578.052639] RSP: 0000:ffff88043e5abe10 EFLAGS: 00010097 [1046578.081360] RAX: ffff880139fa5540 RBX: ffff8803d18419c0 RCX: ffff8801d2f8fb78 [1046578.109903] RDX: dead000000200200 RSI: 0000000000000000 RDI: 0000000000000000 [1046578.109905] RBP: 0000000000000246 R08: 0000000000000020 R09: ffffffff816339b8 [1046578.109907] R10: 0000000004e6e5f0 R11: 0000000000000006 R12: ffffffff816339b8 [1046578.109909] R13: ffff8803d63ac4e0 R14: ffff88043e582340 R15: ffffffff8104a216 [1046578.109911] FS: 0000000000000000(0000) GS:ffff880028260000(0000) knlGS:0000000000000000 [1046578.109914] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [1046578.109915] CR2: 00007f55ab220000 CR3: 00000001e5797000 CR4: 00000000000006e0 [1046578.109917] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1046578.109919] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [1046578.109922] Process events/3 (pid: 38, threadinfo ffff88043e5aa000, task ffff88043e582340) [1046578.109923] Stack: [1046578.109924] ffff8803d63ac498 ffff8803d63ac4d8 ffff8803d63ac440 ffffffff8104a2c3 [1046578.109927] <0> ffff88043e5abef8 ffff880028276040 ffff8803d63ac4d8 ffffffff81050395 [1046578.109929] <0> ffff88043e582340 ffff88043e5826c8 ffff88043e582340 ffff88043e5abfd8 [1046578.109932] Call Trace: [1046578.109938] [] ? cleanup_user_struct+0xad/0xcc [1046578.109942] [] ? worker_thread+0x148/0x1d4 [1046578.109946] [] ? autoremove_wake_function+0x0/0x2e [1046578.109948] [] ? worker_thread+0x0/0x1d4 [1046578.109951] [] ? kthread+0x79/0x81 [1046578.109955] [] ? child_rip+0xa/0x20 [1046578.109957] [] ? kthread+0x0/0x81 [1046578.109959] [] ? child_rip+0x0/0x20 [1046578.109961] Code: 3c 00 4c 8b 25 02 98 3d 00 48 89 c5 83 cf ff eb 5c 48 8b 43 10 48 63 f7 48 8b 04 f0 48 8b 90 80 00 00 00 48 8b 48 78 48 89 51 08 <48> 89 0a 48 b9 00 02 20 00 00 00 ad de 48 89 88 80 00 00 00 48 [1046578.109975] RIP [] sched_destroy_group+0x3c/0x10d [1046578.109979] RSP [1046578.109981] ---[ end trace 5ebc2944b7872d4a ]--- Signed-off-by: Dhaval Giani <dhaval.giani@gmail.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1263990378.24844.3.camel@localhost> LKML-Reference: http://marc.info/?l=linux-kernel&m=129466345327931 Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2010-11-22sched: Fix string comparison in /proc/sched_featuresMathieu Desnoyers
commit 7740191cd909b75d75685fb08a5d1f54b8a9d28b upstream. Fix incorrect handling of the following case: INTERACTIVE INTERACTIVE_SOMETHING_ELSE The comparison only checks up to each element's length. Changelog since v1: - Embellish using some Rostedtisms. [ mingo: ^^ == smaller and cleaner ] Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tony Lindgren <tony@atomide.com> LKML-Reference: <20100913214700.GB16118@Krystal> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-28fix 2.6.32.23 suspend regression caused by commit 6f6198aMike Galbraith
[Not upstream in the same way, as it was fixed differently there] 6f6198a sched: kill migration thread in CPU_POST_DEAD instead of CPU_DEAD leaves migration threads lying about. Mask out CPU_TASKS_FROZEN. Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-26sched: Fix user time incorrectly accounted as system time on 32-bitStanislaw Gruszka
commit e75e863dd5c7d96b91ebbd241da5328fc38a78cc upstream. We have 32-bit variable overflow possibility when multiply in task_times() and thread_group_times() functions. When the overflow happens then the scaled utime value becomes erroneously small and the scaled stime becomes i erroneously big. Reported here: https://bugzilla.redhat.com/show_bug.cgi?id=633037 https://bugzilla.kernel.org/show_bug.cgi?id=16559 Reported-by: Michael Chapman <redhat-bugzilla@very.puzzling.org> Reported-by: Ciriaco Garcia de Celis <sysman@etherpilot.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> LKML-Reference: <20100914143513.GB8415@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20sched: cpuacct: Use bigger percpu counter batch values for stats countersAnton Blanchard
commit fa535a77bd3fa32b9215ba375d6a202fe73e1dd6 upstream When CONFIG_VIRT_CPU_ACCOUNTING and CONFIG_CGROUP_CPUACCT are enabled we can call cpuacct_update_stats with values much larger than percpu_counter_batch. This means the call to percpu_counter_add will always add to the global count which is protected by a spinlock and we end up with a global spinlock in the scheduler. Based on an idea by KOSAKI Motohiro, this patch scales the batch value by cputime_one_jiffy such that we have the same batch limit as we would if CONFIG_VIRT_CPU_ACCOUNTING was disabled. His patch did this once at boot but that initialisation happened too early on PowerPC (before time_init) and it was never updated at runtime as a result of a hotplug cpu add/remove. This patch instead scales percpu_counter_batch by cputime_one_jiffy at runtime, which keeps the batch correct even after cpu hotplug operations. We cap it at INT_MAX in case of overflow. For architectures that do not support CONFIG_VIRT_CPU_ACCOUNTING, cputime_one_jiffy is the constant 1 and gcc is smart enough to optimise min(s32 percpu_counter_batch, INT_MAX) to just percpu_counter_batch at least on x86 and PowerPC. So there is no need to add an #ifdef. On a 64 thread PowerPC box with CONFIG_VIRT_CPU_ACCOUNTING and CONFIG_CGROUP_CPUACCT enabled, a context switch microbenchmark is 234x faster and almost matches a CONFIG_CGROUP_CPUACCT disabled kernel: CONFIG_CGROUP_CPUACCT disabled: 16906698 ctx switches/sec CONFIG_CGROUP_CPUACCT enabled: 61720 ctx switches/sec CONFIG_CGROUP_CPUACCT + patch: 16663217 ctx switches/sec Tested with: wget http://ozlabs.org/~anton/junkcode/context_switch.c make context_switch for i in `seq 0 63`; do taskset -c $i ./context_switch & done vmstat 1 Signed-off-by: Anton Blanchard <anton@samba.org> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Tested-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20sched: Pre-compute cpumask_weight(sched_domain_span(sd))Peter Zijlstra
commit 669c55e9f99b90e46eaa0f98a67ec53d46dc969a upstream Dave reported that his large SPARC machines spend lots of time in hweight64(), try and optimize some of those needless cpumask_weight() invocations (esp. with the large offstack cpumasks these are very expensive indeed). Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20sched: Fix nr_uninterruptible countPeter Zijlstra
commit cc87f76a601d2d256118f7bab15e35254356ae21 upstream The cpuload calculation in calc_load_account_active() assumes rq->nr_uninterruptible will not change on an offline cpu after migrate_nr_uninterruptible(). However the recent migrate on wakeup changes broke that and would result in decrementing the offline cpu's rq->nr_uninterruptible. Fix this by accounting the nr_uninterruptible on the waking cpu. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20sched: Optimize task_rq_lock()Peter Zijlstra
commit 65cc8e4859ff29a9ddc989c88557d6059834c2a2 upstream Now that we hold the rq->lock over set_task_cpu() again, we can do away with most of the TASK_WAKING checks and reduce them again to set_cpus_allowed_ptr(). Removes some conditionals from scheduling hot-paths. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20sched: Fix TASK_WAKING vs fork deadlockPeter Zijlstra
commit 0017d735092844118bef006696a750a0e4ef6ebd upstream Oleg noticed a few races with the TASK_WAKING usage on fork. - since TASK_WAKING is basically a spinlock, it should be IRQ safe - since we set TASK_WAKING (*) without holding rq->lock it could be there still is a rq->lock holder, thereby not actually providing full serialization. (*) in fact we clear PF_STARTING, which in effect enables TASK_WAKING. Cure the second issue by not setting TASK_WAKING in sched_fork(), but only temporarily in wake_up_new_task() while calling select_task_rq(). Cure the first by holding rq->lock around the select_task_rq() call, this will disable IRQs, this however requires that we push down the rq->lock release into select_task_rq_fair()'s cgroup stuff. Because select_task_rq_fair() still needs to drop the rq->lock we cannot fully get rid of TASK_WAKING. Reported-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20sched: Make select_fallback_rq() cpuset friendlyOleg Nesterov
commit 9084bb8246ea935b98320554229e2f371f7f52fa upstream Introduce cpuset_cpus_allowed_fallback() helper to fix the cpuset problems with select_fallback_rq(). It can be called from any context and can't use any cpuset locks including task_lock(). It is called when the task doesn't have online cpus in ->cpus_allowed but ttwu/etc must be able to find a suitable cpu. I am not proud of this patch. Everything which needs such a fat comment can't be good even if correct. But I'd prefer to not change the locking rules in the code I hardly understand, and in any case I believe this simple change make the code much more correct compared to deadlocks we currently have. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20100315091027.GA9155@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20sched: _cpu_down(): Don't play with current->cpus_allowedOleg Nesterov
commit 6a1bdc1b577ebcb65f6603c57f8347309bc4ab13 upstream _cpu_down() changes the current task's affinity and then recovers it at the end. The problems are well known: we can't restore old_allowed if it was bound to the now-dead-cpu, and we can race with the userspace which can change cpu-affinity during unplug. _cpu_down() should not play with current->cpus_allowed at all. Instead, take_cpu_down() can migrate the caller of _cpu_down() after __cpu_disable() removes the dying cpu from cpu_online_mask. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20100315091023.GA9148@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20sched: sched_exec(): Remove the select_fallback_rq() logicOleg Nesterov
commit 30da688ef6b76e01969b00608202fff1eed2accc upstream. sched_exec()->select_task_rq() reads/updates ->cpus_allowed lockless. This can race with other CPUs updating our ->cpus_allowed, and this looks meaningless to me. The task is current and running, it must have online cpus in ->cpus_allowed, the fallback mode is bogus. And, if ->sched_class returns the "wrong" cpu, this likely means we raced with set_cpus_allowed() which was called for reason, why should sched_exec() retry and call ->select_task_rq() again? Change the code to call sched_class->select_task_rq() directly and do nothing if the returned cpu is wrong after re-checking under rq->lock. From now task_struct->cpus_allowed is always stable under TASK_WAKING, select_fallback_rq() is always called under rq-lock or the caller or the caller owns TASK_WAKING (select_task_rq). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20100315091019.GA9141@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20sched: move_task_off_dead_cpu(): Remove retry logicOleg Nesterov
commit c1804d547dc098363443667609c272d1e4d15ee8 upstream The previous patch preserved the retry logic, but it looks unneeded. __migrate_task() can only fail if we raced with migration after we dropped the lock, but in this case the caller of set_cpus_allowed/etc must initiate migration itself if ->on_rq == T. We already fixed p->cpus_allowed, the changes in active/online masks must be visible to racer, it should migrate the task to online cpu correctly. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20100315091014.GA9138@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20sched: move_task_off_dead_cpu(): Take rq->lock around select_fallback_rq()Oleg Nesterov
commit 1445c08d06c5594895b4fae952ef8a457e89c390 upstream move_task_off_dead_cpu()->select_fallback_rq() reads/updates ->cpus_allowed lockless. We can race with set_cpus_allowed() running in parallel. Change it to take rq->lock around select_fallback_rq(). Note that it is not trivial to move this spin_lock() into select_fallback_rq(), we must recheck the task was not migrated after we take the lock and other callers do not need this lock. To avoid the races with other callers of select_fallback_rq() which rely on TASK_WAKING, we also check p->state != TASK_WAKING and do nothing otherwise. The owner of TASK_WAKING must update ->cpus_allowed and choose the correct CPU anyway, and the subsequent __migrate_task() is just meaningless because p->se.on_rq must be false. Alternatively, we could change select_task_rq() to take rq->lock right after it calls sched_class->select_task_rq(), but this looks a bit ugly. Also, change it to not assume irqs are disabled and absorb __migrate_task_irq(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20100315091010.GA9131@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20sched: Kill the broken and deadlockable ↵Oleg Nesterov
cpuset_lock/cpuset_cpus_allowed_locked code commit 897f0b3c3ff40b443c84e271bef19bd6ae885195 upstream This patch just states the fact the cpusets/cpuhotplug interaction is broken and removes the deadlockable code which only pretends to work. - cpuset_lock() doesn't really work. It is needed for cpuset_cpus_allowed_locked() but we can't take this lock in try_to_wake_up()->select_fallback_rq() path. - cpuset_lock() is deadlockable. Suppose that a task T bound to CPU takes callback_mutex. If cpu_down(CPU) happens before T drops callback_mutex stop_machine() preempts T, then migration_call(CPU_DEAD) tries to take cpuset_lock() and hangs forever because CPU is already dead and thus T can't be scheduled. - cpuset_cpus_allowed_locked() is deadlockable too. It takes task_lock() which is not irq-safe, but try_to_wake_up() can be called from irq. Kill them, and change select_fallback_rq() to use cpu_possible_mask, like we currently do without CONFIG_CPUSETS. Also, with or without this patch, with or without CONFIG_CPUSETS, the callers of select_fallback_rq() can race with each other or with set_cpus_allowed() pathes. The subsequent patches try to to fix these problems. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20100315091003.GA9123@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20sched: set_cpus_allowed_ptr(): Don't use rq->migration_thread after unlockOleg Nesterov
commit 47a70985e5c093ae03d8ccf633c70a93761d86f2 upstream Trivial typo fix. rq->migration_thread can be NULL after task_rq_unlock(), this is why we have "mt" which should be used instead. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20100330165829.GA18284@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20sched: Queue a deboosted task to the head of the RT prio queueThomas Gleixner
commit 60db48cacb9b253d5607a5ff206112a59cd09e34 upstream rtmutex_set_prio() is used to implement priority inheritance for futexes. When a task is deboosted it gets enqueued at the tail of its RT priority list. This is violating the POSIX scheduling semantics: rt priority list X contains two runnable tasks A and B task A runs with priority X and holds mutex M task C preempts A and is blocked on mutex M -> task A is boosted to priority of task C (Y) task A unlocks the mutex M and deboosts itself -> A is dequeued from rt priority list Y -> A is enqueued to the tail of rt priority list X task C schedules away task B runs This is wrong as task A did not schedule away and therefor violates the POSIX scheduling semantics. Enqueue the task to the head of the priority list instead. Reported-by: Mathias Weber <mathias.weber.mw1@roche.com> Reported-by: Carsten Emde <cbe@osadl.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Tested-by: Carsten Emde <cbe@osadl.org> Tested-by: Mathias Weber <mathias.weber.mw1@roche.com> LKML-Reference: <20100120171629.809074113@linutronix.de> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20sched: Extend enqueue_task to allow head queueingThomas Gleixner
commit ea87bb7853168434f4a82426dd1ea8421f9e604d upstream The ability of enqueueing a task to the head of a SCHED_FIFO priority list is required to fix some violations of POSIX scheduling policy. Extend the related functions with a "head" argument. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Tested-by: Carsten Emde <cbe@osadl.org> Tested-by: Mathias Weber <mathias.weber.mw1@roche.com> LKML-Reference: <20100120171629.734886007@linutronix.de> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Greg Kroah-Hartman <gre