aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2013-12-07ACPI: Clean up inclusions of ACPI header filesLv Zheng
Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-06ether_addr_equal: Optimize implementation, remove unused compare_ether_addrJoe Perches
Add a new check for CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS to reduce the number of or's used in the ether_addr_equal comparison to very slightly improve function performance. Simplify the ether_addr_equal_64bits implementation. Integrate and remove the zap_last_2bytes helper as it's now used only once. Remove the now unused compare_ether_addr function. Update the unaligned-memory-access documentation to remove the compare_ether_addr description and show how unaligned accesses could occur with ether_addr_equal. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06ipv6 addrconf: introduce IFA_F_MANAGETEMPADDR to tell kernel to manage ↵Jiri Pirko
temporary addresses Creating an address with this flag set will result in kernel taking care of temporary addresses in the same way as if the address was created by kernel itself (after RA receive). This allows userspace applications implementing the autoconfiguration (NetworkManager for example) to implement ipv6 addresses privacy. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Thomas Haller <thaller@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06ipv6 addrconf: extend ifa_flags to u32Jiri Pirko
There is no more space in u8 ifa_flags. So do what davem suffested and add another netlink attr called IFA_FLAGS for carry more flags. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Thomas Haller <thaller@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06usb: omap1: add extcon to platform dataAaro Koskinen
Add extcon field to platform data. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-06ARM: OMAP1: USB: move omap_usb_config to platform dataAaro Koskinen
Move omap_usb_config to platform data, so that OTG driver can include it. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-06net: introduce dev_consume_skb_any()Eric Dumazet
Some network drivers use dev_kfree_skb_any() and dev_kfree_skb_irq() helpers to free skbs, both for dropped packets and TX completed ones. We need to separate the two causes to get better diagnostics given by dropwatch or "perf record -e skb:kfree_skb" This patch provides two new helpers, dev_consume_skb_any() and dev_consume_skb_irq() to be used for consumed skbs. __dev_kfree_skb_irq() is slightly optimized to remove one atomic_dec_and_test() in fast path, and use this_cpu_{r|w} accessors. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06cgroup: remove for_each_root_subsys()Tejun Heo
After the previous patch which introduced for_each_css(), for_each_root_subsys() only has two users left. This patch replaces it with for_each_subsys() + explicit subsys_mask testing and remove for_each_root_subsys() along with cgroupfs_root->subsys_list handling. This patch doesn't introduce any behavior changes. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2013-12-06net: phy: breakdown PHY_*_FEATURES definesFlorian Fainelli
Breakdown the PHY_*_FEATURES into per speed defines such that we can easily re-use them individually. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== Please pull this batch of updates intended for the 3.14 stream... For the mac80211 bits, Johannes says: "I have various improvements/cleanups/fixes all over, but the shortlog shows that Luis's regulatory work and mesh work from the cozybit folks are the biggest ones, along with the CSA fixes." Along with that, we have big batches of updates to brcmfmac, rtlwifi, and ath9k. There are updates to wcn36xx, rt2x00, and a handful of others as well. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06sunrpc: replace sunrpc_net->gssd_running flag with a more reliable checkJeff Layton
Now that we have a more reliable method to tell if gssd is running, we can replace the sn->gssd_running flag with a function that will query to see if it's up and running. There's also no need to attempt an upcall that we know will fail, so just return -EACCES if gssd isn't running. Finally, fix the warn_gss() message not to claim that that the upcall timed out since we don't necesarily perform one now when gssd isn't running, and remove the extraneous newline from the message. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-12-06sunrpc: create a new dummy pipe for gssd to hold openJeff Layton
rpc.gssd will naturally hold open any pipe named */clnt*/gssd that shows up under rpc_pipefs. That behavior gives us a reliable mechanism to tell whether it's actually running or not. Create a new toplevel "gssd" directory in rpc_pipefs when it's mounted. Under that directory create another directory called "clntXX", and then within that a pipe called "gssd". We'll never send an upcall along that pipe, and any downcall written to it will just return -EINVAL. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-12-06tcp: auto corkingEric Dumazet
With the introduction of TCP Small Queues, TSO auto sizing, and TCP pacing, we can implement Automatic Corking in the kernel, to help applications doing small write()/sendmsg() to TCP sockets. Idea is to change tcp_push() to check if the current skb payload is under skb optimal size (a multiple of MSS bytes) If under 'size_goal', and at least one packet is still in Qdisc or NIC TX queues, set the TCP Small Queue Throttled bit, so that the push will be delayed up to TX completion time. This delay might allow the application to coalesce more bytes in the skb in following write()/sendmsg()/sendfile() system calls. The exact duration of the delay is depending on the dynamics of the system, and might be zero if no packet for this flow is actually held in Qdisc or NIC TX ring. Using FQ/pacing is a way to increase the probability of autocorking being triggered. Add a new sysctl (/proc/sys/net/ipv4/tcp_autocorking) to control this feature and default it to 1 (enabled) Add a new SNMP counter : nstat -a | grep TcpExtTCPAutoCorking This counter is incremented every time we detected skb was under used and its flush was deferred. Tested: Interesting effects when using line buffered commands under ssh. Excellent performance results in term of cpu usage and total throughput. lpq83:~# echo 1 >/proc/sys/net/ipv4/tcp_autocorking lpq83:~# perf stat ./super_netperf 4 -t TCP_STREAM -H lpq84 -- -m 128 9410.39 Performance counter stats for './super_netperf 4 -t TCP_STREAM -H lpq84 -- -m 128': 35209.439626 task-clock # 2.901 CPUs utilized 2,294 context-switches # 0.065 K/sec 101 CPU-migrations # 0.003 K/sec 4,079 page-faults # 0.116 K/sec 97,923,241,298 cycles # 2.781 GHz [83.31%] 51,832,908,236 stalled-cycles-frontend # 52.93% frontend cycles idle [83.30%] 25,697,986,603 stalled-cycles-backend # 26.24% backend cycles idle [66.70%] 102,225,978,536 instructions # 1.04 insns per cycle # 0.51 stalled cycles per insn [83.38%] 18,657,696,819 branches # 529.906 M/sec [83.29%] 91,679,646 branch-misses # 0.49% of all branches [83.40%] 12.136204899 seconds time elapsed lpq83:~# echo 0 >/proc/sys/net/ipv4/tcp_autocorking lpq83:~# perf stat ./super_netperf 4 -t TCP_STREAM -H lpq84 -- -m 128 6624.89 Performance counter stats for './super_netperf 4 -t TCP_STREAM -H lpq84 -- -m 128': 40045.864494 task-clock # 3.301 CPUs utilized 171 context-switches # 0.004 K/sec 53 CPU-migrations # 0.001 K/sec 4,080 page-faults # 0.102 K/sec 111,340,458,645 cycles # 2.780 GHz [83.34%] 61,778,039,277 stalled-cycles-frontend # 55.49% frontend cycles idle [83.31%] 29,295,522,759 stalled-cycles-backend # 26.31% backend cycles idle [66.67%] 108,654,349,355 instructions # 0.98 insns per cycle # 0.57 stalled cycles per insn [83.34%] 19,552,170,748 branches # 488.244 M/sec [83.34%] 157,875,417 branch-misses # 0.81% of all branches [83.34%] 12.130267788 seconds time elapsed Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06netfilter: Fix FSF address in file headersJeff Kirsher
Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL <http://www.gnu.org/licenses/> so that we do not have to keep updating the header comments anytime the address changes. CC: netfilter@vger.kernel.org CC: Pablo Neira Ayuso <pablo@netfilter.org> CC: Patrick McHardy <kaber@trash.net> CC: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06include/net/: Fix FSF address in file headersJeff Kirsher
Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL <http://www.gnu.org/licenses/> so that we do not have to keep updating the header comments anytime the address changes. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06sctp: Fix FSF address in file headersJeff Kirsher
Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL <http://www.gnu.org/licenses/> so that we do not have to keep updating the header comments anytime the address changes. CC: Vlad Yasevich <vyasevich@gmail.com> CC: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of nine fixes (and one author update). The libsas one should fix discovery in eSATA devices, the WRITE_SAME one is the largest, but it should fix a lot of problems we've been getting with the emulated RAID devices (they've been effectively lying about support and then firmware has been choking on the commands). The rest are various crash, hang or warn driver fixes" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] bfa: Fix crash when symb name set for offline vport [SCSI] enclosure: fix WARN_ON in dual path device removing [SCSI] pm80xx: Tasklets synchronization fix. [SCSI] pm80xx: Resetting the phy state. [SCSI] pm80xx: Fix for direct attached device. [SCSI] pm80xx: Module author addition [SCSI] hpsa: return 0 from driver probe function on success, not 1 [SCSI] hpsa: do not discard scsi status on aborted commands [SCSI] Disable WRITE SAME for RAID and virtual host adapter drivers [SCSI] libsas: fix usage of ata_tf_to_fis
2013-12-06Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2013-12-06net: Remove FLOWI_FLAG_CAN_SLEEPSteffen Klassert
FLOWI_FLAG_CAN_SLEEP was used to notify xfrm about the posibility to sleep until the needed states are resolved. This code is gone, so FLOWI_FLAG_CAN_SLEEP is not needed anymore. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-12-06xfrm: Remove ancient sleeping when the SA is in acquire stateSteffen Klassert
We now queue packets to the policy if the states are not yet resolved, this replaces the ancient sleeping code. Also the sleeping can cause indefinite task hangs if the needed state does not get resolved. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-12-06xfrm: Namespacify xfrm state/policy locksFan Du
By semantics, xfrm layer is fully name space aware, so will the locks, e.g. xfrm_state/pocliy_lock. Ensure exclusive access into state/policy link list for different name space with one global lock is not right in terms of semantics aspect at first place, as they are indeed mutually independent with each other, but also more seriously causes scalability problem. One practical scenario is on a Open Network Stack, more than hundreds of lxc tenants acts as routers within one host, a global xfrm_state/policy_lock becomes the bottleneck. But onces those locks are decoupled in a per-namespace fashion, locks contend is just with in specific name space scope, without causing additional SPD/SAD access delay for other name space. Also this patch improve scalability while as without changing original xfrm behavior. Signed-off-by: Fan Du <fan.du@windriver.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-12-06xfrm: Using the right namespace to migrate key infoFan Du
because the home agent could surely be run on a different net namespace other than init_net. The original behavior could lead into inconsistent of key info. Signed-off-by: Fan Du <fan.du@windriver.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-12-05Merge tag 'pm-3.13-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: - cpufreq regression fix from Bjørn Mork restoring the pre-3.12 behavior of the framework during system suspend/hibernation to avoid garbage sysfs files from being left behind in case of a suspend error - PNP regression fix to restore the correct states of devices after resume from hibernation broken in 3.12. From Dmitry Torokhov. - cpuidle fix to prevent cpuidle device unregistration from crashing due to a NULL pointer dereference if cpuidle has been disabled from the kernel command line. From Konrad Rzeszutek Wilk. - intel_idle fix for the C6 state definition on Intel Avoton/Rangeley processors from Arne Bockholdt. - Power capping framework fix to make the energy_uj sysfs attribute work in accordance with the documentation. From Srinivas Pandruvada. - epoll fix to make it ignore the EPOLLWAKEUP flag if the kernel has been compiled with CONFIG_PM_SLEEP unset (in which case that flag should not have any effect). From Amit Pundir. - cpufreq fix to prevent governor sysfs files from being lost over system suspend/resume in some (arguably unusual) situations. From Viresh Kumar. * tag 'pm-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PowerCap: Fix mode for energy counter PNP: fix restoring devices after hibernation cpuidle: Check for dev before deregistering it. epoll: drop EPOLLWAKEUP if PM_SLEEP is disabled cpufreq: fix garbage kobjects on errors during suspend/resume cpufreq: suspend governors on system suspend/hibernate intel_idle: Fixed C6 state on Avoton/Rangeley processors
2013-12-05tcp_memcontrol: Cleanup/fix cg_proto->memory_pressure handling.Eric W. Biederman
kill memcg_tcp_enter_memory_pressure. The only function of memcg_tcp_enter_memory_pressure was to reduce deal with the unnecessary abstraction that was tcp_memcontrol. Now that struct tcp_memcontrol is gone remove this unnecessary function, the unnecessary function pointer, and modify sk_enter_memory_pressure to set this field directly, just as sk_leave_memory_pressure cleas this field directly. This fixes a small bug I intruduced when killing struct tcp_memcontrol that caused memcg_tcp_enter_memory_pressure to never be called and thus failed to ever set cg_proto->memory_pressure. Remove the cg_proto enter_memory_pressure function as it now serves no useful purpose. Don't test cg_proto->memory_presser in sk_leave_memory_pressure before clearing it. The test was originally there to ensure that the pointer was non-NULL. Now that cg_proto is not a pointer the pointer does not matter. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-05xen-netback: fix fragment detection in checksum setupPaul Durrant
The code to detect fragments in checksum_setup() was missing for IPv4 and too eager for IPv6. (It transpires that Windows seems to send IPv6 packets with a fragment header even if they are not a fragment - i.e. offset is zero, and M bit is not set). This patch also incorporates a fix to callers of maybe_pull_tail() where skb->network_header was being erroneously added to the length argument. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> cc: David Miller <davem@davemloft.net> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06Merge branches 'pm-epoll', 'pnp' and 'powercap'Rafael J. Wysocki
* pm-epoll: epoll: drop EPOLLWAKEUP if PM_SLEEP is disabled * pnp: PNP: fix restoring devices after hibernation * powercap: PowerCap: Fix mode for energy counter
2013-12-06Merge branches 'pm-cpuidle' and 'pm-cpufreq'Rafael J. Wysocki
* pm-cpuidle: cpuidle: Check for dev before deregistering it. intel_idle: Fixed C6 state on Avoton/Rangeley processors * pm-cpufreq: cpufreq: fix garbage kobjects on errors during suspend/resume cpufreq: suspend governors on system suspend/hibernate
2013-12-05Merge branch 'siocghwtstamp' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next Ben Hutchings says: ==================== SIOCGHWTSTAMP ioctl 1. Add the SIOCGHWTSTAMP ioctl and update the timestamping documentation. 2. Implement SIOCGHWTSTAMP in most drivers that support SIOCSHWTSTAMP. 3. Add a test program to exercise SIOC{G,S}HWTSTAMP. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-05Merge tag 'nfs-for-3.13-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: - Stable fix for a NFSv4.1 delegation and state recovery deadlock - Stable fix for a loop on irrecoverable errors when returning delegations - Fix a 3-way deadlock between layoutreturn, open, and state recovery - Update the MAINTAINERS file with contact information for Trond Myklebust - Close needs to handle NFS4ERR_ADMIN_REVOKED - Enabling v4.2 should not recompile nfsd and lockd - Fix a couple of compile warnings * tag 'nfs-for-3.13-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: nfs: fix do_div() warning by instead using sector_div() MAINTAINERS: Update contact information for Trond Myklebust NFSv4.1: Prevent a 3-way deadlock between layoutreturn, open and state recovery SUNRPC: do not fail gss proc NULL calls with EACCES NFSv4: close needs to handle NFS4ERR_ADMIN_REVOKED NFSv4: Update list of irrecoverable errors on DELEGRETURN NFSv4 wait on recovery for async session errors NFS: Fix a warning in nfs_setsecurity NFS: Enabling v4.2 should not recompile nfsd and lockd
2013-12-05Input: add SW_MUTE_DEVICE switch definitionPing Cheng
Some devices, such as new Intuos series tablets, have a hardware switch to turn touch data on/off. To report the state, SW_MUTE_DEVICE is added in include/uapi/linux/input.h. Reviewed_by: Chris Bagwell <chris@cnpbagwell.com> Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-05percpu: fix spurious sparse warnings from DEFINE_PER_CPU()Tejun Heo
When CONFIG_DEBUG_FORCE_WEAK_PER_CPU or CONFIG_ARCH_NEEDS_WEAK_PER_CPU is set, DEFINE_PER_CPU() explodes into cryptic series of definitions to still allow using "static" for percpu variables while keeping all per-cpu symbols unique in the kernel image which is required for weak symbols. This ultimately converts the actual symbol to global whether DEFINE_PER_CPU() is prefixed with static or not. Unfortunately, the macro forgot to add explicit extern declartion of the actual symbol ending up defining global symbol without preceding declaration for static definitions which naturally don't have matching DECLARE_PER_CPU(). The only ill effect is triggering of the following warnings. fs/inode.c:74:8: warning: symbol 'nr_inodes' was not declared. Should it be static? fs/inode.c:75:8: warning: symbol 'nr_unused' was not declared. Should it be static? Fix it by adding extern declaration in the DEFINE_PER_CPU() macro. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
2013-12-05Merge tag 'sound-3.13-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A usual pattern of half ASoC and half HD-audio fixes, although HD-audio fixups have more volumes, in addition to a couple of trivial fixes. Nothing to worry much is found here. For ASoC side: a few fixes for PCM rate constraints calculations, regmap byte-order fix, the rest driver specific fixes (atmel, fsl, omap, kirkwood, wm codecs). For HD-audio: Dell headset and mono out fix, ELD update in polling mode, ALC283 Chromebook fixes, a few fixes for old AD codecs and MBA2, one regression fix" * tag 'sound-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits) ALSA: hda - Fix silent output on MacBook Air 2,1 ALSA: hda - Fix missing ELD info when using jackpoll_ms parameter ALSA: hda/realtek - remove hp_automute_hook from alc283_fixup_chromebook ASoC: wm8731: fix dsp mode configuration ALSA: hda/realtek - Independent of model for HP ALSA: hda - Fix headset mic input after muted internal mic (Dell/Realtek) ALSA: hda - Use always amps for auto-mute on AD1986A codec ALSA: hda/analog - Handle inverted EAPD properly in vmaster hook ALSA: hda - Another fixup for ASUS laptop with ALC660 codec ALSA: atmel: Fix possible array overflow ALSA: hda - Fix complete_all() timing in deferred probes ALSA: hda - Fix bad EAPD setup for HP machines with AD1984A ASoC: core: fix devres parameter in devm_snd_soc_register_card() ASoC: omap: n810: Convert to clk_prepare_enable/clk_disable_unprepare ASoC: fsl: set correct platform drvdata in pcm030_fabric_probe() ASoC: fsl: imx-pcm-fiq: Remove unused 'runtime' variable ASoC: fsl: imx-pcm-fiq: remove bogus period delta calculation ALSA: hda - Fix silent output on ASUS W7J laptop ASoC: core: Use consistent byte ordering in snd_soc_bytes_get ALSA: dice: fix array limits in dice_proc_read() ...
2013-12-05cgroup: unify pidlist and other file handlingTejun Heo
In preparation of conversion to kernfs, cgroup file handling is updated so that it can be easily mapped to kernfs. With the previous changes, the difference between pidlist and other files are very small. Both are served by seq_file in a pretty standard way with the only difference being !pidlist files use single_open(). This patch adds cftype->seq_start(), ->seq_next and ->seq_stop() and implements the matching cgroup_seqfile_start/next/stop() which either emulates single_open() behavior or invokes cftype->seq_*() operations if specified. This allows using single seq_operations for both pidlist and other files and makes cgroup_pidlist_operations and cgorup_pidlist_open() no longer necessary. As cgroup_pidlist_open() was the only user of cftype->open(), the method is dropped together. This brings cftype file interface very close to kernfs interface and mapping shouldn't be too difficult. Once converted to kernfs, most of the plumbing code including cgroup_seqfile_*() will be removed as kernfs provides those facilities. This patch does not introduce any behavior changes. v2: Refreshed on top of the updated "cgroup: introduce struct cgroup_pidlist_open_file". v3: Refreshed on top of the updated "cgroup: attach cgroup_open_file to all cgroup files". Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2013-12-05cgroup: replace cftype->read_seq_string() with cftype->seq_show()Tejun Heo
In preparation of conversion to kernfs, cgroup file handling is updated so that it can be easily mapped to kernfs. This patch replaces cftype->read_seq_string() with cftype->seq_show() which is not limited to single_open() operation and will map directcly to kernfs seq_file interface. The conversions are mechanical. As ->seq_show() doesn't have @css and @cft, the functions which make use of them are converted to use seq_css() and seq_cft() respectively. In several occassions, e.f. if it has seq_string in its name, the function name is updated to fit the new method better. This patch does not introduce any behavior changes. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Aristeu Rozanski <arozansk@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Acked-by: Li Zefan <lizefan@huawei.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Neil Horman <nhorman@tuxdriver.com>
2013-12-05cgroup: attach cgroup_open_file to all cgroup filesTejun Heo
In preparation of conversion to kernfs, cgroup file handling is updated so that it can be easily mapped to kernfs. This patch attaches cgroup_open_file, which used to be attached to pidlist files, to all cgroup files, introduces seq_css/cft() accessors to determine the cgroup_subsys_state and cftype associated with a given cgroup seq_file, exports them as public interface. This doesn't cause any behavior changes but unifies cgroup file handling across different file types and will help converting them to kernfs seq_show() interface. v2: Li pointed out that the original patch was using single_open_size() incorrectly assuming that the size param is private data size. Fix it by allocating @of separately and passing it to single_open() and explicitly freeing it in the release path. This isn't the prettiest but this path is gonna be restructured by the following patches pretty soon. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2013-12-05cgroup: remove cftype->read(), ->read_map() and ->write()Tejun Heo
In preparation of conversion to kernfs, cgroup file handling is being consolidated so that it can be easily mapped to the seq_file based interface of kernfs. After recent updates, ->read() and ->read_map() don't have any user left and ->write() never had any user. Remove them. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2013-12-05cfg80211: in bitrate_mask, rename mcs to ht_mcsJanusz Dziedzic
Rename NL80211_TXRATE_MCS to NL80211_TXRATE_HT and also rename mcs to ht_mcs in struct cfg80211_bitrate_mask. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> [reword commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-05Bluetooth: Simplify l2cap_chan initialization for LE CoCJohan Hedberg
The values in l2cap_chan that are used for actually transmitting data only need to be initialized right after we've received an L2CAP Connect Request or just before we send one. The only thing that we need to initialize though bind() and connect() is the chan->mode value. This way all other initializations can be done in the l2cap_le_flowctl_init function (which now becomes private to l2cap_core.c) and the l2cap_le_flowctl_start function can be completely removed. Also, since the l2cap_sock_init function initializes the imtu and omtu to adequate values these do not need to be part of l2cap_le_flowctl_init. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05Bluetooth: Fix CID ranges for LE CoC CID allocationsJohan Hedberg
LE CoC used differend CIC ranges than BR/EDR L2CAP. The start of the range is the same (0x0040) but the range ends at 0x007f (unlike BR/EDR where it goes all the way to 0xffff). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05Bluetooth: Fix LE L2CAP Connect Request handling together with SMPJohan Hedberg
Unlike BR/EDR, for LE when we're in the BT_CONNECT state we may or may not have already have sent the Connect Request. This means that we need some extra tracking of the request. This patch adds an extra channel flag to prevent the request from being sent a second time. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05Bluetooth: Introduce L2CAP channel callback for suspendingJohan Hedberg
Setting the BT_SK_SUSPEND socket flag from the L2CAP core is causing a dependency on the socket. So instead of doing that, use a channel callback into the socket handling to suspend. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05Bluetooth: Add new BT_SNDMTU and BT_RCVMTU socket optionsJohan Hedberg
This patch adds new socket options for LE sockets since the existing L2CAP_OPTIONS socket option is not usable for LE. For now, the new socket options also require LE CoC support to be explicitly enabled to leave some playroom in case something needs to be changed in a backwards incompatible way. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05Bluetooth: Track LE L2CAP credits in l2cap_chanJohan Hedberg
This patch adds tracking of L2CAP connection oriented channel local and remote credits to struct l2cap_chan and ensures that connect requests and responses contain the right values. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05Bluetooth: Add LE L2CAP flow control modeJohan Hedberg
The LE connection oriented channels have their own mode with its own data transfer rules. In order to implement this properly we need to distinguish L2CAP channels operating in this mode from other modes. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05Bluetooth: Add basic LE L2CAP connect request receiving supportJohan Hedberg
This patch adds the necessary boiler plate code to handle receiving L2CAP connect requests over LE and respond to them with a proper connect response. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05Bluetooth: Add definitions for LE connection oriented channelsJohan Hedberg
This patch adds the necessary defines and structs for LE connection oriented channels. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05Bluetooth: Add module parameter to enable LE CoC supportJohan Hedberg
Along with the L2CAP Connection Oriented Channels features it is now allowed to use both custom fixed CIDs as well as PSM based (connection oriented connections). Since the support for this (with the subsequent patches) is still on an experimental stage, add a module parameter to enable it. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05crypto: more robust crypto_memneqCesar Eduardo Barros
Disabling compiler optimizations can be fragile, since a new optimization could be added to -O0 or -Os that breaks the assumptions the code is making. Instead of disabling compiler optimizations, use a dummy inline assembly (based on RELOC_HIDE) to block the problematic kinds of optimization, while still allowing other optimizations to be applied to the code. The dummy inline assembly is added after every OR, and has the accumulator variable as its input and output. The compiler is forced to assume that the dummy inline assembly could both depend on the accumulator variable and change the accumulator variable, so it is forced to compute the value correctly before the inline assembly, and cannot assume anything about its value after the inline assembly. This change should be enough to make crypto_memneq work correctly (with data-independent timing) even if it is inlined at its call sites. That can be done later in a followup patch. Compile-tested on x86_64. Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.eti.br> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-12-05crypto: ccp - CCP device driver and interface supportTom Lendacky
These routines provide the device driver support for the AMD Cryptographic Coprocessor (CCP). Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-12-04Merge branch 'x86/urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 and EFI fixes from Peter Anvin: "Half of these are EFI-related: The by far biggest change is the change to hold off the deletion of a sysfs entry while a backend scan is in progress. This is to avoid calling kmemdup() while under a spinlock. The other major change is for each entry in the EFI pstore backend to get a unique identifier, as required by the pstore filesystem proper. The other changes are: A fix to the recent consolidation and optimization of using "asm goto" with read-modify-write operation, which broke the bitops; specifically in such a way that we could end up generating invalid code. A build hack to make sure we compile with -mno-sse. icc, and most likely future versions of gcc, can generate SSE instructions unless we tell it not to. A comment-only patch to a change the was due in part to an unpublished erratum; now when the erratum is published we want to add a comment explaining why" * 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic, doc: Justification for disabling IO APIC before Local APIC x86, bitops: Correct the assembly constraints to testing bitops x86-64, build: Always pass in -mno-sse efi-pstore: Make efi-pstore return a unique id x86/efi: Fix earlyprintk off-by-one bug efivars, efi-pstore: Hold off deletion of sysfs entry until the scan is completed