| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw into next
Pull gfs2 updates from Steven Whitehouse:
"This must be about the smallest merge window patch set ever for GFS2.
It is probably also the first one without a single patch from me.
That is down to a combination of factors, and I have some things in
the works that are not quite ready yet, that I hope to put in next
time around.
Returning to what is here this time... we have 3 patches which fix
various warnings. Two are bug fixes (for quotas and also a rare
recovery race condition). The final patch, from Ben Marzinski, is an
important change in the freeze code which has been in progress for
some time. This removes the need to take and drop the transaction
lock for every single transaction, when the only time it was used, was
at file system freeze time. Ben's patch integrates the freeze
operation into the journal flush code as an alternative with lower
overheads and also lands up resolving some difficult to fix races at
the same time"
* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw:
GFS2: Prevent recovery before the local journal is set
GFS2: fs/gfs2/file.c: kernel-doc warning fixes
GFS2: fs/gfs2/bmap.c: kernel-doc warning fixes
GFS2: remove transaction glock
GFS2: lops.c: replace 0 by NULL for pointers
GFS2: quotas not being refreshed in gfs2_adjust_quota
|
|
Pull file locking changes from Jeff Layton:
"Pretty quiet on the file-locking related front this cycle. Just some
small cleanups and the addition of some tracepoints in the lease
handling code"
* tag 'locks-v3.16' of git://git.samba.org/jlayton/linux:
locks: add some tracepoints in the lease handling code
fs/locks.c: replace seq_printf by seq_puts
locks: ensure that fl_owner is always initialized properly in flock and lease codepaths
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next
Pull x86 build cleanups from Ingo Molnar:
"Two small build related cleanups"
* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/build: Supress realmode.bin is up to date message
compiler-intel.h: Remove duplicate definition
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next
Pull scheduler updates from Ingo Molnar:
"The main scheduling related changes in this cycle were:
- various sched/numa updates, for better performance
- tree wide cleanup of open coded nice levels
- nohz fix related to rq->nr_running use
- cpuidle changes and continued consolidation to improve the
kernel/sched/idle.c high level idle scheduling logic. As part of
this effort I pulled cpuidle driver changes from Rafael as well.
- standardized idle polling amongst architectures
- continued work on preparing better power/energy aware scheduling
- sched/rt updates
- misc fixlets and cleanups"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits)
sched/numa: Decay ->wakee_flips instead of zeroing
sched/numa: Update migrate_improves/degrades_locality()
sched/numa: Allow task switch if load imbalance improves
sched/rt: Fix 'struct sched_dl_entity' and dl_task_time() comments, to match the current upstream code
sched: Consolidate open coded implementations of nice level frobbing into nice_to_rlimit() and rlimit_to_nice()
sched: Initialize rq->age_stamp on processor start
sched, nohz: Change rq->nr_running to always use wrappers
sched: Fix the rq->next_balance logic in rebalance_domains() and idle_balance()
sched: Use clamp() and clamp_val() to make sys_nice() more readable
sched: Do not zero sg->cpumask and sg->sgp->power in build_sched_groups()
sched/numa: Fix initialization of sched_domain_topology for NUMA
sched: Call select_idle_sibling() when not affine_sd
sched: Simplify return logic in sched_read_attr()
sched: Simplify return logic in sched_copy_attr()
sched: Fix exec_start/task_hot on migrated tasks
arm64: Remove TIF_POLLING_NRFLAG
metag: Remove TIF_POLLING_NRFLAG
sched/idle: Make cpuidle_idle_call() void
sched/idle: Reflow cpuidle_idle_call()
sched/idle: Delay clearing the polling bit
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next
Pull perf updates from Ingo Molnar:
"The tooling changes maintained by Jiri Olsa until Arnaldo is on
vacation:
User visible changes:
- Add -F option for specifying output fields (Namhyung Kim)
- Propagate exit status of a command line workload for record command
(Namhyung Kim)
- Use tid for finding thread (Namhyung Kim)
- Clarify the output of perf sched map plus small sched command
fixes (Dongsheng Yang)
- Wire up perf_regs and unwind support for ARM64 (Jean Pihet)
- Factor hists statistics counts processing which in turn also fixes
several bugs in TUI report command (Namhyung Kim)
- Add --percentage option to control absolute/relative percentage
output (Namhyung Kim)
- Add --list-cmds to 'kmem', 'mem', 'lock' and 'sched', for use by
completion scripts (Ramkumar Ramachandra)
Development/infrastructure changes and fixes:
- Android related fixes for pager and map dso resolving (Michael
Lentine)
- Add libdw DWARF post unwind support for ARM (Jean Pihet)
- Consolidate types.h for ARM and ARM64 (Jean Pihet)
- Fix possible null pointer dereference in session.c (Masanari Iida)
- Cleanup, remove unused variables in map_switch_event() (Dongsheng
Yang)
- Remove nr_state_machine_bugs in perf latency (Dongsheng Yang)
- Remove usage of trace_sched_wakeup(.success) (Peter Zijlstra)
- Cleanups for perf.h header (Jiri Olsa)
- Consolidate types.h and export.h within tools (Borislav Petkov)
- Move u64_swap union to its single user's header, evsel.h (Borislav
Petkov)
- Fix for s390 to properly parse tracepoints plus test code
(Alexander Yarygin)
- Handle EINTR error for readn/writen (Namhyung Kim)
- Add a test case for hists filtering (Namhyung Kim)
- Share map_groups among threads of the same group (Arnaldo Carvalho
de Melo, Jiri Olsa)
- Making some code (cpu node map and report parse callchain callback)
global to be usable by upcomming changes (Don Zickus)
- Fix pmu object compilation error (Jiri Olsa)
Kernel side changes:
- intrusive uprobes fixes from Oleg Nesterov. Since the interface is
admin-only, and the bug only affects user-space ("any probed
jmp/call can kill the application"), we queued these fixes via the
development tree, as a special exception.
- more fuzzer motivated race fixes and related refactoring and
robustization.
- allow PMU drivers to be built as modules. (No actual module yet,
because the x86 Intel uncore module wasn't ready in time for this)"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
perf tools: Add automatic remapping of Android libraries
perf tools: Add cat as fallback pager
perf tests: Add a testcase for histogram output sorting
perf tests: Factor out print_hists_*()
perf tools: Introduce reset_output_field()
perf tools: Get rid of obsolete hist_entry__sort_list
perf hists: Reset width of output fields with header length
perf tools: Skip elided sort entries
perf top: Add --fields option to specify output fields
perf report/tui: Fix a bug when --fields/sort is given
perf tools: Add ->sort() member to struct sort_entry
perf report: Add -F option to specify output fields
perf tools: Call perf_hpp__init() before setting up GUI browsers
perf tools: Consolidate management of default sort orders
perf tools: Allow hpp fields to be sort keys
perf ui: Get rid of callback from __hpp__fmt()
perf tools: Consolidate output field handling to hpp format routines
perf tools: Use hpp formats to sort final output
perf tools: Support event grouping in hpp ->sort()
perf tools: Use hpp formats to sort hist entries
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next
Pull core locking updates from Ingo Molnar:
"The main changes in this cycle were:
- reduced/streamlined smp_mb__*() interface that allows more usecases
and makes the existing ones less buggy, especially in rarer
architectures
- add rwsem implementation comments
- bump up lockdep limits"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
rwsem: Add comments to explain the meaning of the rwsem's count field
lockdep: Increase static allocations
arch: Mass conversion of smp_mb__*()
arch,doc: Convert smp_mb__*()
arch,xtensa: Convert smp_mb__*()
arch,x86: Convert smp_mb__*()
arch,tile: Convert smp_mb__*()
arch,sparc: Convert smp_mb__*()
arch,sh: Convert smp_mb__*()
arch,score: Convert smp_mb__*()
arch,s390: Convert smp_mb__*()
arch,powerpc: Convert smp_mb__*()
arch,parisc: Convert smp_mb__*()
arch,openrisc: Convert smp_mb__*()
arch,mn10300: Convert smp_mb__*()
arch,mips: Convert smp_mb__*()
arch,metag: Convert smp_mb__*()
arch,m68k: Convert smp_mb__*()
arch,m32r: Convert smp_mb__*()
arch,ia64: Convert smp_mb__*()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next
Pull RCU changes from Ingo Molnar:
"The main RCU changes in this cycle were:
- RCU torture-test changes.
- variable-name renaming cleanup.
- update RCU documentation.
- miscellaneous fixes.
- patch to suppress RCU stall warnings while sysrq requests are being
processed"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (68 commits)
rcu: Provide API to suppress stall warnings while sysrc runs
rcu: Variable name changed in tree_plugin.h and used in tree.c
torture: Remove unused definition
torture: Remove __init from torture_init_begin/end
torture: Check for multiple concurrent torture tests
locktorture: Remove reference to nonexistent Kconfig parameter
rcutorture: Run rcu_torture_writer at normal priority
rcutorture: Note diffs from git commits
rcutorture: Add missing destroy_timer_on_stack()
rcutorture: Explicitly test synchronous grace-period primitives
rcutorture: Add tests for get_state_synchronize_rcu()
rcutorture: Test RCU-sched primitives in TREE_PREEMPT_RCU kernels
torture: Use elapsed time to detect hangs
rcutorture: Check for rcu_torture_fqs creation errors
torture: Better summary diagnostics for build failures
torture: Notice if an all-zero cpumask is passed inside a critical section
rcutorture: Make rcu_torture_reader() use cond_resched()
sched,rcu: Make cond_resched() report RCU quiescent states
percpu: Fix raw_cpu_inc_return()
rcutorture: Export RCU grace-period kthread wait state to rcutorture
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into next
Pull regulator updates from Mark Brown:
"The bulk of the changes for this release are a few new drivers however
there are a couple of noticable core changes and the usual stream of
cleanups and fixes:
- move disable of unused regulators later in init so it comes after
deferred probe has iterated making startup smoother.
- fixes to reference counting of the DT nodes for constraints from
Charles Keepax. This has little practical impact since all real
users of the regulator bindings use FDT which doesn't need the
reference counting.
- lots of cleanups, especially to the Samsung drivers.
- support for Linear Technologies LTC3589, Texas Instruments
TPS658640 and X-Powers AXP20x"
* tag 'regulator-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (64 commits)
regulator: pbias: remove unnecessary OOM messages
regulator: max8649: remove unnecessary OOM messages
regulator: core: Fix the init of DT defined fixed regulators
regulator: core: Disable unused regulators after deferred probing is done
regulator: Don't disable unused regulators we don't have permission for
regulator: axp20x: Use regulator_map_voltage_ascend for LDO4
regulator: use of_property_read_{bool|u32}()
regulator: Fix regulator_get_{optional,exclusive}() documentation
regulators: Add definition of regulator_set_voltage_time() for !CONFIG_REGULATOR
regulator: arizona-ldo1: add missing #include
regulator: pfuze100: Support enable/disable for fixed regulator
regulator: ltc3589: Remove ltc3589_list_voltage_fixed function
regulator: ltc3589: Fix module dependency
regulator: tps6586x: Remove unused to_tps6586x_dev() function
regulator: tps65218: Convert to use regulator_set_voltage_time_sel
regulator: tps6586x: Add support for the TPS658640
regulator: tps6586x: Prepare supporting fixed regulators
regulator: pfuze100: Don't allocate an invalid gpio
regulator: pfuze100: Support SWB enable/disable
regulator: fixed: use of_property_read_{bool|u32}()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into next
Pull spi updates from Mark Brown:
"For this release SPI has been exceptionally quiet, all the work has
been on improving drivers (including taking advantage of some of the
recent framework updates):
- DMA support for the rspi driver providing a nice performance boost
- performance improvement for the SIRF controller in PIO mode
- new support for the Cadence SPI IP and for pxa2xx on BayTrail"
* tag 'spi-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (59 commits)
spi: rspi: Extract rspi_common_transfer()
spi: rspi: Add DMA support for RSPI on RZ/A1H
spi: rspi: Add DMA support for QSPI on R-Car Gen2
spi: rspi: Absorb rspi_rz_transfer_out_in() into rspi_rz_transfer_one()
spi: rspi: Merge rspi_*_dma() into rspi_dma_transfer()
spi: rspi: Pass sg_tables instead of spi_tranfer to rspi_*_dma()
spi: rspi: Move RSPI-specific setup out of DMA routines
spi: rspi: Use SPI core DMA mapping framework
spi: rspi: SPI DMA core needs both RX and TX DMA to function
spi: rspi: Remove unneeded resource test in DMA setup
spi: rspi: Extract rspi_request_dma_chan()
spi: rspi: Don't consider DMA configuration failures fatal
spi: rspi: Extract rspi_pio_transfer()
spi: rspi: Use core SPI_MASTER_MUST_[RT]X handling
spi: rspi: Remove unused 16-bit DMA support
spi: rspi: Do not call rspi_receive_init() for TX-only
spi: rspi: Extract rspi_wait_for_{tx_empty,rx_full}()
spi/pxa2xx: fix runtime PM enabling order
spi/fsl-espi: fix rx_buf in fsl_espi_cmd_trans()/fsl_espi_rw_trans()
spi: core: Ignore unsupported spi-[tr]x-bus-width property values
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into next
Pull regmap updates from Mark Brown:
"Another fairly quiet release, a few bug fixes and a couple of new
features:
- support for I2C devices connected to SMBus rather than full I2C
controllers contributed by Boris Brezillon. If the controller is
only capable of SMBus operation the framework will transparently
fall back to that
- suport for little endian values, contributed by Xiubo Li"
* tag 'regmap-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: mmio: Fix regmap_mmio_write for uneven counts
regmap: irq: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
regmap: Add missing initialization of this_page
regmap: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
regmap: i2c: fallback to SMBus if the adapter does not support standard I2C
regmap: add reg_read/reg_write callbacks to regmap_bus struct
regmap: rbtree: improve 64bits memory alignment
regmap: mmio: Fix the bug of 'offset' value parsing.
regmap: implement LE formatting/parsing for 16/32-bit values.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux into next
Pull first set of s390 updates from Martin Schwidefsky:
"The biggest change in this patchset is conversion from the bootmem
bitmaps to the memblock code. This conversion requires two common
code patches to introduce the 'physmem' memblock list.
We experimented with ticket spinlocks but in the end decided against
them as they perform poorly on virtualized systems. But the spinlock
cleanup and some small improvements are included.
The uaccess code got another optimization, the get_user/put_user calls
are now inline again for kernel compiles targeted at z10 or newer
machines. This makes the text segment shorter and the code gets a
little bit faster.
And as always some bug fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (31 commits)
s390/lowcore: replace lowcore irb array with a per-cpu variable
s390/lowcore: reserve 96 bytes for IRB in lowcore
s390/facilities: remove extract-cpu-time facility check
s390: require mvcos facility for z10 and newer machines
s390/boot: fix boot of compressed kernel built with gcc 4.9
s390/cio: remove weird assignment during argument evaluation
s390/time: cast tv_nsec to u64 prior to shift in update_vsyscall
s390/oprofile: make return of 0 explicit
s390/spinlock: refactor arch_spin_lock_wait[_flags]
s390/rwlock: add missing local_irq_restore calls
s390/spinlock,rwlock: always to a load-and-test first
s390/cio: fix multiple structure definitions
s390/spinlock: fix system hang with spin_retry <= 0
s390/appldata: add slab.h for kzalloc/kfree
s390/uaccess: provide inline variants of get_user/put_user
s390/pci: add some new arch specific pci attributes
s390/pci: use pdev->dev.groups for attribute creation
s390/pci: use macro for attribute creation
s390/pci: improve state check when processing hotplug events
s390: split TIF bits into CIF, PIF and TIF bits
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb into next
Pull USB driver updates from Greg KH:
"Here is the big USB driver pull request for 3.16-rc1.
Nothing huge here, but lots of little things in the USB core, and in
lots of drivers. Hopefully the USB power management will be work
better now that it has been reworked to do per-port power control
dynamically. There's also a raft of gadget driver updates and fixes,
CONFIG_USB_DEBUG is finally gone now that everything has been
converted over to the dynamic debug inteface, the last hold-out
drivers were cleaned up and the config option removed. There were
also other minor things all through the drivers/usb/ tree, the
shortlog shows this pretty well.
All have been in linux-next, including the very last patch, which came
from linux-next to fix a build issue on some platforms"
* tag 'usb-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (314 commits)
usb: hub_handle_remote_wakeup() only exists for CONFIG_PM=y
USB: orinoco_usb: remove CONFIG_USB_DEBUG support
USB: media: lirc: igorplugusb: remove CONFIG_USB_DEBUG support
USB: media: streamzap: remove CONFIG_USB_DEBUG
USB: media: redrat3: remove CONFIG_USB_DEBUG usage
USB: media: redrat3: remove unneeded tracing macro
usb: qcserial: add additional Sierra Wireless QMI devices
usb: host: max3421-hcd: Use module_spi_driver
usb: host: max3421-hcd: Allow platform-data to specify Vbus polarity
usb: host: max3421-hcd: fix "spi_rd8" uses dynamic stack allocation warning
usb: host: max3421-hcd: Fix missing unlock in max3421_urb_enqueue()
usb: qcserial: add Netgear AirCard 341U
Documentation: dt-bindings: update xhci-platform DT binding for R-Car H2 and M2
usb: host: xhci-plat: add xhci_plat_start()
usb: host: max3421-hcd: Fix potential NULL urb dereference
Revert "usb: gadget: net2280: Add support for PLX USB338X"
USB: usbip: remove CONFIG_USB_DEBUG reference
USB: remove CONFIG_USB_DEBUG from defconfig files
usb: resume child device when port is powered on
usb: hub_handle_remote_wakeup() depends on CONFIG_PM_RUNTIME=y
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty into next
Pull tty/serial driver updates from Greg KH:
"Here is the big tty / serial driver pull request for 3.16-rc1.
A variety of different serial driver fixes and updates and additions,
nothing huge, and no real major core tty changes at all.
All have been in linux-next for a while"
* tag 'tty-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (84 commits)
Revert "serial: imx: remove the DMA wait queue"
serial: kgdb_nmi: Improve console integration with KDB I/O
serial: kgdb_nmi: Switch from tasklets to real timers
serial: kgdb_nmi: Use container_of() to locate private data
serial: cpm_uart: No LF conversion in put_poll_char()
serial: sirf: Fix compilation failure
console: Remove superfluous readonly check
console: Use explicit pointer type for vc_uni_pagedir* fields
vgacon: Fix & cleanup refcounting
ARM: tty: Move HVC DCC assembly to arch/arm
tty/hvc/hvc_console: Fix wakeup of HVC thread on hvc_kick()
drivers/tty/n_hdlc.c: replace kmalloc/memset by kzalloc
vt: emulate 8- and 24-bit colour codes.
printk/of_serial: fix serial console cessation part way through boot.
serial: 8250_dma: check the result of TX buffer mapping
serial: uart: add hw flow control support configuration
tty/serial: at91: add interrupts for modem control lines
tty/serial: at91: use mctrl_gpio helpers
tty/serial: Add GPIOLIB helpers for controlling modem lines
ARM: at91: gpio: implement get_direction
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging into next
Pull staging driver updates from Greg KH:
"Here is the big staging driver pull request for 3.16-rc1.
Lots of stuff here, tons of cleanup patches, a few new drivers, and
some removed as well, but I think we are still adding a few thousand
more lines than we remove, due to the new drivers being bigger than
the ones deleted.
One notible bit of work did stand out, Jes Sorensen has gone on a
tear, fixing up a wireless driver to be "more sane" than it originally
was from the vendor, with over 500 patches merged here. Good stuff,
and a number of users laptops are better off for it.
All of this has been in linux-next for a while"
* tag 'staging-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1703 commits)
staging: skein: fix sparse warning for static declarations
staging/mt29f_spinand: coding style fixes
staging: silicom: fix sparse warning for static variable
staging: lustre: Fix coding style
staging: android: binder.c: Use more appropriate functions for euid retrieval
staging: lustre: fix integer as NULL pointer warnings
Revert "staging: dgap: remove unneeded kfree() in dgap_tty_register_ports()"
Staging: rtl8192u: r8192U_wx.c Fixed a misplaced brace
staging: ion: shrink highmem pages on kswapd
staging: ion: use compound pages on high order pages for system heap
staging: ion: remove struct ion_page_pool_item
staging: ion: simplify ion_page_pool_total()
staging: ion: tidy up a bit
staging: rtl8723au: Remove redundant casting in usb_ops_linux.c
staging: rtl8723au: Remove redundant casting in rtl8723a_hal_init.c
staging: rtl8723au: Remove redundant casting in rtw_xmit.c
staging: rtl8723au: Remove redundant casting in rtw_wlan_util.c
staging: rtl8723au: Remove redundant casting in rtw_sta_mgt.c
staging: rtl8723au: Remove redundant casting in rtw_recv.c
staging: rtl8723au: Remove redundant casting in rtw_mlme.c
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into next
Pull driver core / kernfs changes from Greg KH:
"Here is the "big" pull request for 3.16-rc1.
Not a lot of changes here, some kernfs work, a revert of a very old
driver core change that ended up cauing some memory leaks on driver
probe error paths, and other minor things.
As was pointed out earlier today, one commit here, 26fc9cd200ec
("kernfs: move the last knowledge of sysfs out from kernfs") is also
needed in your 3.15-final branch as well. If you could cherry-pick it
there, it would be most appreciated by Andy Lutomirski to prevent a
regression there.
All of these have been in linux-next for a while"
* tag 'driver-core-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
crypto/nx/nx-842: dev_set_drvdata can no longer fail
kernfs: move the last knowledge of sysfs out from kernfs
sysfs: fix attribute_group bin file path on removal
sysfs.h: don't return a void-valued expression in sysfs_remove_file
init.h: Update initcall_sync variants to fix build errors
driver core: Inline dev_set/get_drvdata
driver core: dev_get_drvdata: Don't check for NULL dev
driver core: dev_set_drvdata returns void
driver core: dev_set_drvdata can no longer fail
driver core: Move driver_data back to struct device
lib/devres.c: fix checkpatch warnings
lib/devres.c: use dev in devm_request_and_ioremap
kobject: Make support for uevent_helper optional.
kernfs: make kernfs_notify() trigger inotify events too
kernfs: implement kernfs_root->supers list
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc into next
Pull char/misc driver patches from Greg KH:
"Here is the big char / misc driver update for 3.16-rc1.
Lots of different driver updates for a variety of different drivers
and minor driver subsystems.
All have been in linux-next with no reported issues"
* tag 'char-misc-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (79 commits)
hv: use correct order when freeing monitor_pages
spmi: of: fixup generic SPMI devicetree binding example
applicom: dereferencing NULL on error path
misc: genwqe: fix uninitialized return value in genwqe_free_sync_sgl()
miscdevice.h: Simple syntax fix to make pointers consistent.
MAINTAINERS: Add miscdevice.h to file list for char/misc drivers.
mcb: Add support for shared PCI IRQs
drivers: Remove duplicate conditionally included subdirs
misc: atmel_pwm: only build for supported platforms
mei: me: move probe quirk to cfg structure
mei: add per device configuration
mei: me: read H_CSR after asserting reset
mei: me: drop harmful wait optimization
mei: me: fix hw ready reset flow
mei: fix memory leak of mei_clients array
uio: fix vma io range check in mmap
drivers: uio_dmem_genirq: Fix memory leak in uio_dmem_genirq_probe()
w1: do not unlock unheld list_mutex in __w1_remove_master_device()
w1: optional bundling of netlink kernel replies
connector: allow multiple messages to be sent in one packet
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next
Pull ARM SoC driver changes from Olof Johansson:
"SoC-near driver changes that we're merging through our tree. Mostly
because they depend on other changes we have staged, but in some cases
because the driver maintainers preferred that we did it this way.
This contains a largeish cleanup series of the omap_l3_noc bus driver,
cpuidle rework for Exynos, some reset driver conversions and a long
branch of TI EDMA fixes and cleanups, with more to come next release.
The TI EDMA cleanups is a shared branch with the dmaengine tree, with
a handful of Davinci-specific fixes on top.
After discussion at last year's KS (and some more on the mailing
lists), we are here adding a drivers/soc directory. The purpose of
this is to keep per-vendor shared code that's needed by different
drivers but that doesn't fit into the MFD (nor drivers/platform)
model. We expect to keep merging contents for this hierarchy through
arm-soc so we can keep an eye on what the vendors keep adding here and
not making it a free-for-all to shove in crazy stuff"
* tag 'drivers-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits)
cpufreq: exynos: Fix driver compilation with ARCH_MULTIPLATFORM
tty: serial: msm: Remove direct access to GSBI
power: reset: keystone-reset: introduce keystone reset driver
Documentation: dt: add bindings for keystone pll control controller
Documentation: dt: add bindings for keystone reset driver
soc: qcom: fix of_device_id table
ARM: EXYNOS: Fix kernel panic when unplugging CPU1 on exynos
ARM: EXYNOS: Move the driver to drivers/cpuidle directory
ARM: EXYNOS: Cleanup all unneeded headers from cpuidle.c
ARM: EXYNOS: Pass the AFTR callback to the platform_data
ARM: EXYNOS: Move S5P_CHECK_SLEEP into pm.c
ARM: EXYNOS: Move the power sequence call in the cpu_pm notifier
ARM: EXYNOS: Move the AFTR state function into pm.c
ARM: EXYNOS: Encapsulate the AFTR code into a function
ARM: EXYNOS: Disable cpuidle for exynos5440
ARM: EXYNOS: Encapsulate boot vector code into a function for cpuidle
ARM: EXYNOS: Pass wakeup mask parameter to function for cpuidle
ARM: EXYNOS: Remove ifdef for scu_enable in pm
ARM: EXYNOS: Move scu_enable in the cpu_pm notifier
ARM: EXYNOS: Use the cpu_pm notifier for pm
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next
Pull ARM SoC devicetree updates from Olof Johansson:
"As with previous release, this continues to be among the largest
branches we merge, with lots of new contents.
New things for this release are among other things:
- DTSI contents for the new SoCs supported in 3.16 (see SoC pull request)
- Qualcomm APQ8064 and APQ8084 SoCs and eval boards
- Nvidia Jetson TK1 development board (Tegra T124-based)
Two new SoCs that didn't need enough new platform code to stand out
enough for me to notice when writing the SoC tag, but that adds new DT
contents are:
- TI DRA72
- Marvell Berlin 2Q"
* tag 'dt-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (500 commits)
ARM: dts: add secure firmware support for exynos5420-arndale-octa
ARM: dts: add pmu sysreg node to exynos3250
ARM: dts: correct the usb phy node in exynos5800-peach-pi
ARM: dts: correct the usb phy node in exynos5420-peach-pit
ARM: dts: add dts files for exynos5410 and exynos5410-smdk5410
ARM: dts: add dts files for exynos3250 SoC
ARM: dts: add mfc node for exynos5800
ARM: dts: add Vbus regulator for USB 3.0 on exynos5800-peach-pi
ARM: dts: enable fimd for exynos5800-peach-pi
ARM: dts: enable display controller for exynos5800-peach-pi
ARM: dts: enable hdmi for exynos5800-peach-pi
ARM: dts: add dts file for exynos5800-peach-pi board
ARM: dts: add dts file for exynos5800 SoC
ARM: dts: add dts file for exynos5260-xyref5260 board
ARM: dts: add dts files for exynos5260 SoC
ARM: dts: update watchdog node name in exynos5440
ARM: dts: use key code macros on Origen and Arndale boards
ARM: dts: enable RTC and WDT nodes on Origen boards
ARM: dts: qcom: Add APQ8084-MTP board support
ARM: dts: qcom: Add APQ8084 SoC support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next
Pull ARM SoC board support updates from Olof Johansson:
"The bulk of this branch is updates for Renesas Shmobile. They are
still doing some enablement for classic boards first, and then come up
with DT bindings when they've had a chance to learn more about the
hardware. Not necessarily a bad way to go about it, and they're
looking at moving some of the temporary board code resulting from it
to drivers/staging instead to avoid the churn here.
As a result of the shmobile clock cleanups, we end up merging quite a
bit of SH code here as well. We ended up merging it here instead of
in the cleanup branch due to the other board changes depending on it"
* tag 'boards-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (130 commits)
ARM: davinci: remove checks for CONFIG_USB_MUSB_PERIPHERAL
ARM: add drivers for Colibri T30 to multi_v7_defconfig
ARM: shmobile: Remove Genmai reference DTS
ARM: shmobile: Let Genmai multiplatform boot with Genmai DTB
ARM: shmobile: Sync Genmai DTS with Genmai reference DTS
ARM: shmobile: genmai-reference: Remove legacy clock support
ARM: shmobile: Remove non-multiplatform Genmai reference support
ARM: configs: enable XHCI mvebu support in multi_v7_defconfig
ARM: OMAP: replace checks for CONFIG_USB_GADGET_OMAP
ARM: OMAP: AM3517EVM: remove check for CONFIG_PANEL_SHARP_LQ043T1DG01
ARM: OMAP: SX1: remove check for CONFIG_SX1_OLD_FLASH
ARM: OMAP: remove some dead code
ARM: OMAP: omap3stalker: remove two Kconfig macros
ARM: tegra: tegra_defconfig updates
ARM: shmobile: r7s72100: use workaround for non DT-clocks
ARM: shmobile: Add forward declaration of struct clk to silence warning
ARM: shmobile: r7s72100: remove SPI DT clocks from legacy clock support
ARM: shmobile: r7s72100: add spi clocks to dtsi
ARM: shmobile: r7s72100: remove I2C DT clocks from legacy clock support
ARM: shmobile: r7s72100: add i2c clocks to dtsi
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next
Pull part one of ARM SoC updates from Olof Johansson:
"A quite large set of SoC updates this cycle. In no particular order:
- Multi-cluster power management for Samsung Exynos, adding support
for big.LITTLE CPU switching on EXYNOS5
- SMP support for Marvell Armada 375 and 38x
- SMP rework on Allwinner A31
- Xilinx Zynq support for SOC_BUS, big endian
- Marvell orion5x platform cleanup, modernizing the implementation
and moving to DT.
- _Finally_ moving Samsung Exynos over to support MULTIPLATFORM, so
that their platform can be enabled in the same kernel binary as
most of the other v7 platforms in the tree. \o/
The work isn't quite complete, there's some driver fixes still
needed, but the basics now work.
New SoC support added:
- Freescale i.MX6SX
- LSI Axxia AXM55xx SoCs
- Samsung EXYNOS 3250, 5260, 5410, 5420 and 5800
- STi STIH407
plus a large set of various smaller updates for different platforms.
I'm probably missing some important one here"
* tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (281 commits)
ARM: exynos: don't run exynos4 l2x0 setup on other platforms
ARM: exynos: Fix "allmodconfig" build errors in mcpm and hotplug
ARM: EXYNOS: mcpm rename the power_down_finish
ARM: EXYNOS: Enable mcpm for dual-cluster exynos5800 SoC
ARM: EXYNOS: Enable multi-platform build support
ARM: EXYNOS: Consolidate Kconfig entries
ARM: EXYNOS: Add support for EXYNOS5410 SoC
ARM: EXYNOS: Support secondary CPU boot of Exynos3250
ARM: EXYNOS: Add Exynos3250 SoC ID
ARM: EXYNOS: Add 5800 SoC support
ARM: EXYNOS: initial board support for exynos5260 SoC
clk: exynos5410: register clocks using common clock framework
ARM: debug: qcom: add UART addresses to Kconfig help for APQ8084
ARM: sunxi: allow building without reset controller
Documentation: devicetree: arm: sort enable-method entries
ARM: rockchip: convert smp bringup to CPU_METHOD_OF_DECLARE
clk: exynos5250: Add missing sysmmu clocks for DISP and ISP blocks
ARM: dts: axxia: Add reset controller
power: reset: Add Axxia system reset driver
ARM: axxia: Adding defconfig for AXM55xx
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next
Pull ARM SoC cleanups from Olof Johansson:
"Cleanups for 3.16. Among these are:
- a bunch of misc cleanups for Broadcom platforms, mostly
housekeeping
- enabling Common Clock Framework on the older s3c24xx Samsung
chipsets
- cleanup of the Versatile Express system controller code, moving it
to syscon
- power management cleanups for OMAP platforms
plus a handful of other cleanups across the place"
* tag 'cleanup-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (87 commits)
ARM: kconfig: allow PCI support to be selected with ARCH_MULTIPLATFORM
clk: samsung: fix build error
ARM: vexpress: refine dependencies for new code
clk: samsung: clk-s3c2410-dlck: do not use PNAME macro as it declares __initdata
cpufreq: exynos: Fix the compile error
ARM: S3C24XX: move debug-macro.S into the common space
ARM: S3C24XX: use generic DEBUG_UART_PHY/_VIRT in debug macro
ARM: S3C24XX: trim down debug uart handling
ARM: compressed/head.S: remove s3c24xx special case
ARM: EXYNOS: Remove unnecessary inclusion of cpu.h
ARM: EXYNOS: Migrate Exynos specific macros from plat to mach
ARM: EXYNOS: Remove exynos_subsys registration
ARM: EXYNOS: Remove duplicate lines in Makefile
ARM: EXYNOS: use v7_exit_coherency_flush macro for cache disabling
ARM: OMAP4: PRCM: remove references to cm-regbits-44xx.h from PRCM core files
ARM: OMAP3/4: PRM: add support of late_init call to prm_ll_ops
ARM: OMAP3/OMAP4: PRM: add prm_features flags and add IO wakeup under it
ARM: OMAP3/4: PRM: provide io chain reconfig function through irq setup
ARM: OMAP2+: PRM: remove unnecessary cpu_is_XXX calls from prm_init / exit
ARM: OMAP2+: PRCM: cleanup some header includes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next
Pull ARM SoC low-priority fixes from Olof Johansson:
"A small selection of fixes coming in late during the release cycle and
not being critical enough for 3.15 inclusion"
* tag 'fixes-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: shmobile: armadillo800eva: fixup HDMI sound flags setting
ARM: msm: Silence readb/writeb warnings due to missing IOMEM()
ARM: dts: am43xx: fix starting offset of NAND.filesystem MTD partition
ARM: dts: am335x-boneblack: remove use of ti,vcc-aux-disable-is-sleep
ARM: OMAP2+: free use_gptimer_clksrc variable after boot
ARM: OMAP5: Redo THUMB mode switch on secondary CPU
ARM: dts: AM4372: add l3-noc information
ARM: dts: DRA7: Use dra7-l3-noc instead of omap4-l3-noc
reset: Add of_reset_control_get to reset.h
|
|
Pull block driver changes from Jens Axboe:
"Now that the core bits are in, here's the pull request for the driver
related changes for 3.16. Nothing out of the ordinary here, mostly
business as usual. There are a few pulls of for-3.16/core into this
branch, which were done when the blk-mq was modified after the
mtip32xx conversion was put in.
The pull request contains:
- skd and cciss converted to use pci_enable_msix_exact(). From
Alexander Gordeev.
- A few mtip32xx fixes from Asai @ Micron.
- The conversion of mtip32xx from make_request_fn to blk-mq, and a
later small fix for that conversion on quiescing for non-queued IO.
From me.
- A fix for bsg to use an exported function to check whether this
driver is request based or not. Needed updating for blk-mq, which
is request based, but does not have a request_fn hook. From me.
- Small floppy bug fix from Jiri.
- A series of cleanups for the cdrom uniform layer from Joe Perches.
Gets rid of various old ugly macros, making the code conform more
to the modern coding style.
- A series of patches for drbd from the drbd crew (Lars Ellenberg and
Philipp Reisner).
- A use-after-free fix for null_blk from Ming Lei.
- Also from Ming Lei is a performance patch for virtio-blk, which can
net us a 3x win on kvm platforms where world notification is
expensive.
- Ming Lei also fixed a stall issue in virtio-blk, due to a race
between queue start/stop and resource limits.
- A small batch of fixes for xen-blk{back,front} from Olaf Hering and
Valentin Priescu"
* 'for-3.16/drivers' of git://git.kernel.dk/linux-block: (54 commits)
block: virtio_blk: don't hold spin lock during world switch
xen-blkback: defer freeing blkif to avoid blocking xenwatch
xen blkif.h: fix comment typo in discard-alignment
xen/blkback: disable discard feature if requested by toolstack
xen-blkfront: remove type check from blkfront_setup_discard
floppy: do not corrupt bio.bi_flags when reading block 0
mtip32xx: move error handling to service thread
virtio_blk: fix race between start and stop queue
mtip32xx: stop block hardware queues before quiescing IO
mtip32xx: blk_mq_init_queue() returns an ERR_PTR
mtip32xx: convert to use blk-mq
cdrom: Remove unnecessary prototype for cdrom_get_disc_info
cdrom: Remove unnecessary prototype for cdrom_mrw_exit
cdrom: Remove cdrom_count_tracks prototype
cdrom: Remove cdrom_get_next_writeable prototype
cdrom: Remove cdrom_get_last_written prototype
cdrom: Move mmc_ioctls above cdrom_ioctl to remove unnecessary prototype
cdrom: Remove unnecessary sanitize_format prototype
cdrom: Remove unnecessary check_for_audio_disc prototype
cdrom: Remove prototype for open_for_data
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into next
Pull PCI changes from Bjorn Helgaas:
"Enumeration
- Notify driver before and after device reset (Keith Busch)
- Use reset notification in NVMe (Keith Busch)
NUMA
- Warn if we have to guess host bridge node information (Myron Stowe)
- Work around AMD Fam15h BIOSes that fail to provide _PXM (Suravee
Suthikulpanit)
- Clean up and mark early_root_info_init() as deprecated (Suravee
Suthikulpanit)
Driver binding
- Add "driver_override" for force specific binding (Alex Williamson)
- Fail "new_id" addition for devices we already know about (Bandan
Das)
Resource management
- Support BAR sizes up to 8GB (Nikhil Rao, Alan Cox)
- Don't move IORESOURCE_PCI_FIXED resources (Bjorn Helgaas)
- Mark SBx00 HPET BAR as IORESOURCE_PCI_FIXED (Bjorn Helgaas)
- Fail safely if we can't handle BARs larger than 4GB (Bjorn Helgaas)
- Reject BAR above 4GB if dma_addr_t is too small (Bjorn Helgaas)
- Don't convert BAR address to resource if dma_addr_t is too small
(Bjorn Helgaas)
- Don't set BAR to zero if dma_addr_t is too small (Bjorn Helgaas)
- Don't print anything while decoding is disabled (Bjorn Helgaas)
- Don't add disabled subtractive decode bus resources (Bjorn Helgaas)
- Add resource allocation comments (Bjorn Helgaas)
- Restrict 64-bit prefetchable bridge windows to 64-bit resources
(Yinghai Lu)
- Assign i82875p_edac PCI resources before adding device (Yinghai Lu)
PCI device hotplug
- Remove unnecessary "dev->bus" test (Bjorn Helgaas)
- Use PCI_EXP_SLTCAP_PSN define (Bjorn Helgaas)
- Fix rphahp endianess issues (Laurent Dufour)
- Acknowledge spurious "cmd completed" event (Rajat Jain)
- Allow hotplug service drivers to operate in polling mode (Rajat Jain)
- Fix cpqphp possible NULL dereference (Rickard Strandqvist)
MSI
- Replace pci_enable_msi_block() by pci_enable_msi_exact()
(Alexander Gordeev)
- Replace pci_enable_msix() by pci_enable_msix_exact() (Alexander Gordeev)
- Simplify populate_msi_sysfs() (Jan Beulich)
Virtualization
- Add Intel Patsburg (X79) root port ACS quirk (Alex Williamson)
- Mark RTL8110SC INTx masking as broken (Alex Williamson)
Generic host bridge driver
- Add generic PCI host controller driver (Will Deacon)
Freescale i.MX6
- Use new clock names (Lucas Stach)
- Drop old IRQ mapping (Lucas Stach)
- Remove optional (and unused) IRQs (Lucas Stach)
- Add support for MSI (Lucas Stach)
- Fix imx6_add_pcie_port() section mismatch warning (Sachin Kamat)
Renesas R-Car
- Add gen2 device tree support (Ben Dooks)
- Use new OF interrupt mapping when possible (Lucas Stach)
- Add PCIe driver (Phil Edworthy)
- Add PCIe MSI support (Phil Edworthy)
- Add PCIe device tree bindings (Phil Edworthy)
Samsung Exynos
- Remove unnecessary OOM messages (Jingoo Han)
- Fix add_pcie_port() section mismatch warning (Sachin Kamat)
Synopsys DesignWare
- Make MSI ISR shared IRQ aware (Lucas Stach)
Miscellaneous
- Check for broken config space aliasing (Alex Williamson)
- Update email address (Ben Hutchings)
- Fix Broadcom CNB20LE unintended sign extension (Bjorn Helgaas)
- Fix incorrect vgaarb conditional in WARN_ON() (Bjorn Helgaas)
- Remove unnecessary __ref annotations (Bjorn Helgaas)
- Add arch/x86/kernel/quirks.c to MAINTAINERS PCI file patterns
(Bjorn Helgaas)
- Fix use of uninitialized MPS value (Bjorn Helgaas)
- Tidy x86/gart messages (Bjorn Helgaas)
- Fix return value from pci_user_{read,write}_config_*() (Gavin Shan)
- Turn pcibios_penalize_isa_irq() into a weak function (Hanjun Guo)
- Remove unused serial device IDs (Jean Delvare)
- Use designated initialization in PCI_VDEVICE (Mark Rustad)
- Fix powerpc NULL dereference in pci_root_buses traversal (Mike Qiu)
- Configure MPS on ARM (Murali Karicheri)
- Remove unnecessary includes of <linux/init.h> (Paul Gortmaker)
- Move Open Firmware devspec attribute to PCI common code (Sebastian Ott)
- Use pdev->dev.groups for attribute creation on s390 (Sebastian Ott)
- Remove pcibios_add_platform_entries() (Sebastian Ott)
- Add new ID for Intel GPU "spurious interrupt" quirk (Thomas Jarosch)
- Rename pci_is_bridge() to pci_has_subordinate() (Yijing Wang)
- Add and use new pci_is_bridge() interface (Yijing Wang)
- Make pci_bus_add_device() void (Yijing Wang)
DMA API
- Clarify physical/bus address distinction in docs (Bjorn Helgaas)
- Fix typos in docs (Emilio López)
- Update dma_pool_create ()and dma_pool_alloc() descriptions (Gioh Kim)
- Change dma_declare_coherent_memory() CPU address to phys_addr_t
(Bjorn Helgaas)
- Pass GAPSPCI_DMA_BASE CPU & bus address to dma_declare_coherent_memory()
(Bjorn Helgaas)"
* tag 'pci-v3.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (92 commits)
MAINTAINERS: Add generic PCI host controller driver
PCI: generic: Add generic PCI host controller driver
PCI: imx6: Add support for MSI
PCI: designware: Make MSI ISR shared IRQ aware
PCI: imx6: Remove optional (and unused) IRQs
PCI: imx6: Drop old IRQ mapping
PCI: imx6: Use new clock names
i82875p_edac: Assign PCI resources before adding device
ARM/PCI: Call pcie_bus_configure_settings() to set MPS
PCI: imx6: Fix imx6_add_pcie_port() section mismatch warning
PCI: Make pci_bus_add_device() void
PCI: exynos: Fix add_pcie_port() section mismatch warning
PCI: Introduce new device binding path using pci_dev.driver_override
PCI: rcar: Add gen2 device tree support
PCI: cpqphp: Fix possible null pointer dereference
PCI: rcar: Add R-Car PCIe device tree bindings
PCI: rcar: Add MSI support for PCIe
PCI: rcar: Add Renesas R-Car PCIe driver
PCI: Fix return value from pci_user_{read,write}_config_*()
PCI: exynos: Remove unnecessary OOM messages
...
|
|
Pull block core updates from Jens Axboe:
"It's a big(ish) round this time, lots of development effort has gone
into blk-mq in the last 3 months. Generally we're heading to where
3.16 will be a feature complete and performant blk-mq. scsi-mq is
progressing nicely and will hopefully be in 3.17. A nvme port is in
progress, and the Micron pci-e flash driver, mtip32xx, is converted
and will be sent in with the driver pull request for 3.16.
This pull request contains:
- Lots of prep and support patches for scsi-mq have been integrated.
All from Christoph.
- API and code cleanups for blk-mq from Christoph.
- Lots of good corner case and error handling cleanup fixes for
blk-mq from Ming Lei.
- A flew of blk-mq updates from me:
* Provide strict mappings so that the driver can rely on the CPU
to queue mapping. This enables optimizations in the driver.
* Provided a bitmap tagging instead of percpu_ida, which never
really worked well for blk-mq. percpu_ida relies on the fact
that we have a lot more tags available than we really need, it
fails miserably for cases where we exhaust (or are close to
exhausting) the tag space.
* Provide sane support for shared tag maps, as utilized by scsi-mq
* Various fixes for IO timeouts.
* API cleanups, and lots of perf tweaks and optimizations.
- Remove 'buffer' from struct request. This is ancient code, from
when requests were always virtually mapped. Kill it, to reclaim
some space in struct request. From me.
- Remove 'magic' from blk_plug. Since we store these on the stack
and since we've never caught any actual bugs with this, lets just
get rid of it. From me.
- Only call part_in_flight() once for IO completion, as includes two
atomic reads. Hopefully we'll get a better implementation soon, as
the part IO stats are now one of the more expensive parts of doing
IO on blk-mq. From me.
- File migration of block code from {mm,fs}/ to block/. This
includes bio.c, bio-integrity.c, bounce.c, and ioprio.c. From me,
from a discussion on lkml.
That should describe the meat of the pull request. Also has various
little fixes and cleanups from Dave Jones, Shaohua Li, Duan Jiong,
Fengguang Wu, Fabian Frederick, Randy Dunlap, Robert Elliott, and Sam
Bradshaw"
* 'for-3.16/core' of git://git.kernel.dk/linux-block: (100 commits)
blk-mq: push IPI or local end_io decision to __blk_mq_complete_request()
blk-mq: remember to start timeout handler for direct queue
block: ensure that the timer is always added
blk-mq: blk_mq_unregister_hctx() can be static
blk-mq: make the sysfs mq/ layout reflect current mappings
blk-mq: blk_mq_tag_to_rq should handle flush request
block: remove dead code in scsi_ioctl:blk_verify_command
blk-mq: request initialization optimizations
block: add queue flag for disabling SG merging
block: remove 'magic' from struct blk_plug
blk-mq: remove alloc_hctx and free_hctx methods
blk-mq: add file comments and update copyright notices
blk-mq: remove blk_mq_alloc_request_pinned
blk-mq: do not use blk_mq_alloc_request_pinned in blk_mq_map_request
blk-mq: remove blk_mq_wait_for_tags
blk-mq: initialize request in __blk_mq_alloc_request
blk-mq: merge blk_mq_alloc_reserved_request into blk_mq_alloc_request
blk-mq: add helper to insert requests from irq context
blk-mq: remove stale comment for blk_mq_complete_request()
blk-mq: allow non-softirq completions
...
|
|
Pull MMC update from Ulf Hansson:
"These patches are mainly updates for the mmci driver and have been
tested in linux-next.
Some ARM SoC related patches are also included and those have been
acked from the corresponding maintainers to go through my mmc tree.
Updates for mmci driver:
- Put the device into low power state at system suspend.
- Convert to the common mmc DT parser.
- Add missing DT bindings needed for ux500.
Updates for ARM ux500|u300:
- Convert to the common mmc DT bindings.
- Remove redundant board file for mmci platform data"
* tag 'mmc-v3.16-1' of git://git.linaro.org/people/ulf.hansson/mmc: (22 commits)
mmc: mmci: Enforce DMA configuration through DT
mmc: mmci: Enforce max frequency configuration through DT
mmc: mmci: Enforce mmc capabilities through DT
mmc: mmci: Enforce DT for signal direction and feedback clock
ARM: ux500: Remove redundant board file for mmci platform data
ARM: ux500: Add a vmmc regulator through DT for the poped eMMC for href
ARM: ux500: Add the mmc capabilities flags to DT
mmc: mmci: Enable MMC_CAP_CMD23
mmc: mmci: Mark the DT bindings for highspeed mode as deprecated
ARM: u300: Convert to the common mmc DT bindings for highspeed mode
ARM: nomadik: Convert to the common mmc DT bindings for highspeed mode
ARM: ux500: Convert to the common mmc DT bindings for highspeed mode
ARM: ux500: Add mmci signal directions and feeback clock in DT for href
mmc: mmci: Use the common mmc DT parser
mmc: mmci: Add DT bindings for feedback clock pin
mmc: mmci: Add DT bindings for signal direction
mmc: mmci: Update DT documentation
mmc: mmci: Convert to devm functions
mmc: mmci: Convert to the mmc gpio API
mmc: mmci: Put the device into low power state at system suspend
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi into next
Pull HSI (High Speed Syncronous Interface) changes from Sebastian Reichel:
"Please pull the following changes for the HSI subsystem, which I have
taken over from Carlos Chinea <carlos.chinea@nokia.com>.
The below patches have been worked on in the linux-omap mailinglist
for 10 months and are well tested in linux-next (have been in there
for more than two weeks) without any problems arising. Apart from
that potential regressions are very limited, because the subsystem is
not yet used by any platform in the mainline kernel.
- Add some documentation for the HSI subsystem
- Add Device Tree support for the HSI subsystem
- Add OMAP3 SSI driver (SSI is a legacy variant of HSI)
- Add Nokia N900 Modem driver (without speech support for now)"
* tag 'hsi-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
HSI: Introduce Nokia N900 modem driver
HSI: Introduce driver for SSI Protocol
Documentation: DT: omap-ssi binding documentation
HSI: Introduce OMAP SSI driver
HSI: Add common DT binding for HSI client devices
HSI: export method to (un)register clients
HSI: Add channel resource support to HSI clients
HSI: method to unregister clients from an hsi port
HSI: hsi-char: fix driver for multiport scenarios
MAINTAINERS: update HSI entry
Documentation: HSI: Add some general description for the HSI subsystem
|
|
'spi/topic/rspi' and 'spi/topic/sirf' into spi-next
|
|
'spi/topic/cadence' into spi-next
|
|
|
|
'regulator/topic/stub', 'regulator/topic/tps65090', 'regulator/topic/tps65217' and 'regulator/topic/tps65218' into regulator-next
|
|
'regulator/topic/pbias', 'regulator/topic/pfuze100', 'regulator/topic/s2mpa01' and 'regulator/topic/s2mps11' into regulator-next
|
|
'regulator/topic/axp20' and 'regulator/topic/bcm590xx' into regulator-next
|
|
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio into next
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v3.16 series.
There is a lot of action in the GPIO subsystem doing refactorings and
cleanups, almost as many deletions as insertions and minor feature
growth and no new drivers this time. Which is actually pretty nice.
Some GPIO-related stuff will come in through the pin control tree as
well.
Details:
- We are finalizing and fixing up the gpiochip irqchip helpers
bringing a helpful irqchip implementation into the gpiolib core and
avoiding duplicate code and, more importantly, duplicate bug fixes:
* Support for using the helpers with threaded interrupt handlers as
used on sleeping GPIO-irqchips
* Do not set up hardware triggers for edges or levels if the
default IRQ type is IRQ_TYPE_NONE - some drivers would exploit
the fact that you could get default initialization of the IRQ
type from the core at probe() but if no default type is set up
from the helper, we should not call the driver to configure
anything. Wait until a consumer requests the interrupt instead.
* Make the irqchip helpers put the GPIO irqs into their own lock
class. The GPIO irqchips can often emit (harmless, but annoying)
lockdep warnings about recursions when they are in fact just
cascaded IRQs. By putting them into their own lock class we help
the lockdep core to keep track of things.
* Switch the tc3589x GPIO expanders to use the irqchip helpers
* Switch the OMAP GPIO driver to use the irqchip helpers
* Add some documentation for the irqchip helpers
* select IRQ_DOMAIN when using the helpers since some platforms may
not be using this by default and it's a strict dependency.
- Continued GPIO descriptor refactoring:
* Remove the one instance of gpio_to_desc() from the device tree
code, making the OF GPIO code use GPIO descriptors only.
* Introduce gpiod_get_optional() and gpiod_get_optional_index()
akin to the similar regulator functions for cases where the use
of GPIO is optional and not strictly required.
* Make of_get_named_gpiod_flags() private - we do not want to
unnecessarily expose APIs to drivers that make the gpiolib harder
than necessary to maintain and refactor. Privatize this
function.
- Support "-gpio" suffix for the OF GPIO retrieveal path. We used to
look for "foo-gpios" or just "gpios" in device tree nodes, but it
turns out that some drivers with a single GPIO line will just state
"foo-gpio" (singularis). Sigh. Support this with a fallback
looking for it, as this simplifies driver code and handles it in
core code.
- Switch the ACPI GPIO core to fetch GPIOs with the *_cansleep
function variants as the GPIO operation region handler can sleep,
and shall be able to handle gpiochips that sleep.
- Tons of cleanups and janitorial work from Jingoo Han, Axel Lin,
Javier Martinez Canillas and Abdoulaye Berthe. Notably Jingoo cut
off a ton of pointless OOM messages.
- Incremental development and fixes for various drivers, nothing
really special here"
* tag 'gpio-v3.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (85 commits)
gpio: select IRQ_DOMAIN for gpiolib irqchip helpers
gpio: pca953x: use gpiolib irqchip helpers
gpio: pcf857x: Add IRQF_SHARED when request irq
gpio: pcf857x: Avoid calling irq_domain_cleanup twice
gpio: mcp23s08: switch chip count to int
gpio: dwapb: use a second irq chip
gpio: ep93xx: Use devm_ioremap_resource()
gpio: mcp23s08: fixed count variable for devicetree probing
gpio: Add run-time dependencies to R-Car driver
gpio: pch: add slab include
Documentation / ACPI: Fix location of GPIO documentation
gpio / ACPI: use *_cansleep version of gpiod_get/set APIs
gpio: generic: add request function pointer
gpio-pch: Fix Kconfig dependencies
gpio: make of_get_named_gpiod_flags() private
gpio: gpioep93xx: use devm functions
gpio: janzttl: use devm function
gpio: timberdale: use devm functions
gpio: bt8xx: use devm function for memory allocation
gpio: include linux/bug.h in interface header
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip into next
Pull Xen updates from David Vrabel:
"xen: features and fixes for 3.16-rc0
- support foreign mappings in PVH domains (needed when dom0 is PVH)
- fix mapping high MMIO regions in x86 PV guests (this is also the
first half of removing the PAGE_IOMAP PTE flag).
- ARM suspend/resume support.
- ARM multicall support"
* tag 'stable/for-linus-3.16-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: map foreign pfns for autotranslated guests
xen-acpi-processor: Don't display errors when we get -ENOSYS
xen/pciback: Document the entry points for 'pcistub_put_pci_dev'
xen/pciback: Document when the 'unbind' and 'bind' functions are called.
xen-pciback: Document when we FLR an PCI device.
xen-pciback: First reset, then free.
xen-pciback: Cleanup up pcistub_put_pci_dev
x86/xen: do not use _PAGE_IOMAP in xen_remap_domain_mfn_range()
x86/xen: set regions above the end of RAM as 1:1
x86/xen: only warn once if bad MFNs are found during setup
x86/xen: compactly store large identity ranges in the p2m
x86/xen: fix set_phys_range_identity() if pfn_e > MAX_P2M_PFN
x86/xen: rename early_p2m_alloc() and early_p2m_alloc_middle()
xen/x86: set panic notifier priority to minimum
arm,arm64/xen: introduce HYPERVISOR_suspend()
xen: refactor suspend pre/post hooks
arm: xen: export HYPERVISOR_multicall to modules.
arm64: introduce virt_to_pfn
arm/xen: Remove definiition of virt_to_pfn in asm/xen/page.h
arm: xen: implement multicall hypercall support.
|
|
The 16-bit DMA support doesn't fit well within the SPI core DMA framework,
as it needs to manage its own double-sized temporary buffers, for handling
the interleaved data.
Remove it, as there is no in-tree board code that sets
rspi_plat_data.dma_width_16bit.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
|
|
v2: add a __break_lease tracepoint for non-blocking case
Recently, I needed these to help track down a softlockup when recalling a
delegation, but they might be helpful in other situations as well.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@poochiereds.net>
|
|
Remove the option to provide DMA configuration as platform data,
enforce it through DT.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Roland Stigge <stigge@antcom.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
|
|
Pull MIPS fixes from Ralf Baechle:
"A fair number of fixes across the field. Nothing terribly
complicated; the one liners in below changelog should be fairly
descriptive.
Noteworthy is the SB1 change which the result of changes to binutils
resulting in one big gas warning for most files being assembled as
well as the asid_cache and branch emulation fixes which fix corruption
or possible uninteded behaviour of kernel or application code. The
remainder of fixes are more platforms or subsystem specific"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: R46000: Fix Micro-assembler field overflow for R4600 V2
MIPS: ptrace: Avoid smp_processor_id() in preemptible code
MIPS: Lemote 2F: cs5536: mfgpt: use raw locks
MIPS: SB1: Fix excessive kernel warnings.
MIPS: RC32434: fix broken PCI resource initialization
MIPS: malta: memory.c: Initialize the 'memsize' variable
MIPS: Fix typo when reporting cache and ftlb errors for ImgTec cores
MIPS: Fix inconsistancy of __NR_Linux_syscalls value
MIPS: Fix branch emulation of branch likely instructions.
MIPS: Fix a typo error in AUDIT_ARCH definition
MIPS: Change type of asid_cache to unsigned long
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers
Merge "Samsung 2nd drivers for 3.16" from Kukjin Kim:
This is including fix exynos cpufreq driver compilation with
ARCH_MULTIPLATFORM. Even though this is a work around, this
is required for support exynos multiplatform for a while and
will be updated in near future.
This is based on tags/samsung-exynos.
* tag 'samsung-drivers-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (24 commits)
cpufreq: exynos: Fix driver compilation with ARCH_MULTIPLATFORM
ARM: EXYNOS: Enable multi-platform build support
ARM: EXYNOS: Consolidate Kconfig entries
ARM: EXYNOS: Add support for EXYNOS5410 SoC
ARM: EXYNOS: Support secondary CPU boot of Exynos3250
ARM: EXYNOS: Add Exynos3250 SoC ID
ARM: EXYNOS: Add 5800 SoC support
ARM: EXYNOS: initial board support for exynos5260 SoC
clk: exynos5250: Add missing sysmmu clocks for DISP and ISP blocks
cpufreq: exynos: Fix the compile error
ARM: S3C24XX: move debug-macro.S into the common space
ARM: S3C24XX: use generic DEBUG_UART_PHY/_VIRT in debug macro
ARM: S3C24XX: trim down debug uart handling
ARM: compressed/head.S: remove s3c24xx special case
ARM: EXYNOS: Remove unnecessary inclusion of cpu.h
ARM: EXYNOS: Migrate Exynos specific macros from plat to mach
ARM: EXYNOS: Remove exynos_subsys registration
ARM: EXYNOS: Remove duplicate lines in Makefile
ARM: EXYNOS: use v7_exit_coherency_flush macro for cache disabling
ARM: dts: Remove g2d_pd node for exynos5420
...
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc
Merge "Samsung 3rd clock updates for 3.16" from Kukjin Kim:
- add clock for new exynos5410 SoC
* tag 'samsung-clk-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
clk: exynos5410: register clocks using common clock framework
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
'pci/misc' into next
* pci/host-exynos:
PCI: exynos: Fix add_pcie_port() section mismatch warning
* pci/host-imx6:
PCI: imx6: Add support for MSI
PCI: designware: Make MSI ISR shared IRQ aware
PCI: imx6: Remove optional (and unused) IRQs
PCI: imx6: Drop old IRQ mapping
PCI: imx6: Use new clock names
PCI: imx6: Fix imx6_add_pcie_port() section mismatch warning
* pci/resource:
i82875p_edac: Assign PCI resources before adding device
* pci/misc:
ARM/PCI: Call pcie_bus_configure_settings() to set MPS
PCI: Make pci_bus_add_device() void
Conflicts:
drivers/edac/i82875p_edac.c
|
|
|
|
The EXYNOS5410 clocks are statically listed and registered
using the Samsung specific common clock helper functions.
Signed-off-by: Tarek Dakhran <t.dakhran@samsung.com>
Signed-off-by: Vyacheslav Tyrtov <v.tyrtov@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
|
|
pci_bus_add_device() always returns 0, so there's no point in returning
anything at all. Make it a void function and remove the tests of the
return value from the callers.
[bhelgaas: changelog, remove unused "err" from i82875p_setup_overfl_dev()]
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Currently blk-mq registers all the hardware queues in sysfs,
regardless of whether it uses them (e.g. they have CPU mappings)
or not. The unused hardware queues lack the cpux/ directories,
and the other sysfs entries (like active, pending, etc) are all
zeroes.
Change this so that sysfs correctly reflects the current mappings
of the hardware queues.
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Pulled in for the blk_mq_tag_to_rq() change, which impacts
mtip32xx.
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
flush request is special, which borrows the tag from the parent
request. Hence blk_mq_tag_to_rq needs special handling to return
the flush request from the tag.
Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
